Forked repository for pushing changes to EVAL-AD4696
Dependencies: platform_drivers
Diff: README.txt
- Revision:
- 1:8792acb5a039
- Parent:
- 0:721af8bb4b69
--- a/README.txt Wed Sep 29 11:39:40 2021 +0000 +++ b/README.txt Thu Sep 30 11:01:05 2021 +0530 @@ -1,45 +1,38 @@ Evaluation Boards/Products Supported ------------------------------------ -EVAL-AD1234 (AD1234) -EVAL-AD1256 (AD1256) -<< add more here >> - +-Products supported: AD4695, AD4696 +-EVAL-AD4696FMCZ + + Overview -------- -These code files provide drivers to interface with AD1234 and communicate with -EVAL-AD1234 board. This code was developed and tested on SDP-K1 controller board -https://os.mbed.com/platforms/SDP_K1/. - -Product details: https://www.analog.com/en/products/ad1234.html -Eval board details: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-AD1234.html - - +This is an IIO ecosystem based firmware application to evalute the AD4696 family ADCs. +The ADI developed ARM Mbed SDP-K1 controlled board acts as a target device, where firmware application is running. +The ARM GCC/ARMC compiler is used for firmware development on ARM Mbed platform. +The EVAL-AD4696FMCZ board is interfaced with SDP-K1 (or any Arduino compatible board) controller board using on-board Arduino Headers. + + Hardware Setup -------------- -Required: SDP-K1, EVAL-AD1234, USB cable, 12 V power supply, 60 MHz external -clock supply. -Plug in the EVAL-AD124 board on SDP-K1 board (or any other Mbed enabled -controller board) using the SDP connector and screws. -Connect SDP-K1 board to the PC using the USB cable. - - +Refer "Hardware Connections" section from below wiki page link: +https://wiki.analog.com/resources/tools-software/product-support-software/ad4696_mbed_iio_application + + How to Get Started ------------------ Open Mbed online compiler. https://ide.mbed.com/compiler -Import Code into compiler from here: https://os.mbed.com/teams/AnalogDevices/code/EVAL-AD1234/ -instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v5.12/tools/importing-code.html -Compile code. Drag and drop binary into SDP-K1 controller board. Find detailed instructions -here: https://os.mbed.com/docs/mbed-os/v5.12/tools/getting-your-program-on-your-board.html -Open Tera Term (or alternative), select 9600 baud rate, and the applicable COM port to see the -list of options. - -A detailed user guide on how to use SDP-K1 board on Mbed platform is available -here: https://wiki.analog.com/resources/tools-software/mbed - - +Import Code into compiler. Instructions on how to import code are here: https://os.mbed.com/docs/mbed-os/v6.8/quick-start/build-with-the-online-compiler.html +Compile code to generate binary file and then drag and drop binary into SDP-K1 controller board. Detailed instructions are here: +https://os.mbed.com/docs/mbed-os/v6.8/build-tools/getting-your-program-on-your-board.html + +Refere project wiki page to find detailed guide on how to use firmware: +https://wiki.analog.com/resources/tools-software/product-support-software/ad4696_mbed_iio_application + + Notes ----- -If using Win 7, install serial drivers for Mbed. https://os.mbed.com/docs/mbed-os/v5.12/tutorials/windows-serial-driver.html +Refere this page for latest documentation on Mbed-OS: https://os.mbed.com/docs/mbed-os/v6.8/introduction/index.html A detailed user guide on SDP-K1 controller board is available here https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/SDP-K1.html. - - \ No newline at end of file + + +Copyright (c) 2021 Analog Devices, Inc. All rights reserved. \ No newline at end of file