File content as of revision 0:5350a66d5279:

/*
 UIPUdp.h - Arduino implementation of a uIP wrapper class.
 Copyright (c) 2013 Norbert Truchsess <norbert.truchsess@t-online.de>
 All rights reserved.

 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 3 of the License, or
 (at your option) any later version.

 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
#ifndef UIPUDP_H
    #define UIPUDP_H

    #include "ethernet_comp.h"
    #include "mbed.h"
    #include <Udp.h>
    #include "mempool.h"
extern "C"
{
    #include "uip.h"
}
    #define UIP_UDP_MAXDATALEN      1500
    #define UIP_UDP_PHYH_LEN        UIP_LLH_LEN + UIP_IPUDPH_LEN
    #define UIP_UDP_MAXPACKETSIZE   UIP_UDP_MAXDATALEN + UIP_UDP_PHYH_LEN
    #ifndef UIP_UDP_NUMPACKETS
        #define UIP_UDP_NUMPACKETS  5
    #endif
class UIPUDP :
    public UDP
{
private:
    struct uip_udp_conn*    _uip_udp_conn;

    struct appdata_t
    {
        uint16_t    rport;
        IPAddress   ripaddr;
        memaddress  out_pos;
        memhandle   packets_in[UIP_UDP_NUMPACKETS];
        memhandle   packet_in;
        memhandle   packet_out;
        bool        send;
    } appdata;
public:
    UIPUDP(void);   // Constructor
    uint8_t     begin(uint16_t);    // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
    void        stop(void);         // Finish with the UDP socket

    // Sending UDP packets
    // Start building up a packet to send to the remote host specific in ip and port
    // Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
    int         beginPacket(IPAddress ip, uint16_t port);

    // Start building up a packet to send to the remote host specific in host and port
    // Returns 1 if successful, 0 if there was a problem resolving the hostname or port
    int         beginPacket(const char* host, uint16_t port);

    // Finish off this packet and send it
    // Returns 1 if the packet was sent successfully, 0 if there was an error
    int         endPacket(void);

    // Write a single byte into the packet
    size_t      write(uint8_t);

    // Write size bytes from buffer into the packet
    size_t      write(const uint8_t* buffer, size_t size);

    //    using Print::write;
    // Start processing the next available incoming packet
    // Returns the size of the packet in bytes, or 0 if no packets are available
    int         parsePacket(void);

    // Number of bytes remaining in the current packet
    int         available(void);

    // Read a single byte from the current packet
    int         read(void);

    // Read up to len bytes from the current packet and place them into buffer
    // Returns the number of bytes read, or 0 if none are available
    int         read(unsigned char* buffer, size_t len);
    // Read up to len characters from the current packet and place them into buffer

    // Returns the number of characters read, or 0 if none are available
    int         read(char* buffer, size_t len)  { return read((unsigned char*)buffer, len); };

    // Return the next byte from the current packet without moving on to the next byte
    int         peek(void);

    void        flush(void);    // Finish reading the current packet

    // Return the IP address of the host who sent the current incoming packet
    IPAddress   remoteIP(void);

    // Return the port of the host who sent the current incoming packet
    uint16_t    remotePort(void);
private:
    static void uip_callback(uip_udp_appstate_t* s);
};
#endif