SPKT
targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_rtc_ex.h
- Committer:
- phungductung
- Date:
- 2019-06-04
- Revision:
- 0:e87aa4c49e95
File content as of revision 0:e87aa4c49e95:
/** ****************************************************************************** * @file stm32f7xx_hal_rtc_ex.h * @author MCD Application Team * @version V1.0.4 * @date 09-December-2015 * @brief Header file of RTC HAL Extension module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F7xx_HAL_RTC_EX_H #define __STM32F7xx_HAL_RTC_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f7xx_hal_def.h" /** @addtogroup STM32F7xx_HAL_Driver * @{ */ /** @addtogroup RTCEx * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Types RTCEx Exported Types * @{ */ /** * @brief RTC Tamper structure definition */ typedef struct { uint32_t Tamper; /*!< Specifies the Tamper Pin. This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */ uint32_t Interrupt; /*!< Specifies the Tamper Interrupt. This parameter can be a value of @ref RTCEx_Tamper_Interrupt_Definitions */ uint32_t Trigger; /*!< Specifies the Tamper Trigger. This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ uint32_t NoErase; /*!< Specifies the Tamper no erase mode. This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp_Definitions */ uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking. This parameter can be a value of @ref RTCEx_Tamper_MaskFlag_Definitions */ uint32_t Filter; /*!< Specifies the RTC Filter Tamper. This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ }RTC_TamperTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants * @{ */ /** @defgroup RTCEx_Output_selection_Definitions RTCEx Output selection Definitions * @{ */ #define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000) #define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000) #define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000) #define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000) /** * @} */ /** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions * @{ */ #define RTC_BKP_DR0 ((uint32_t)0x00000000) #define RTC_BKP_DR1 ((uint32_t)0x00000001) #define RTC_BKP_DR2 ((uint32_t)0x00000002) #define RTC_BKP_DR3 ((uint32_t)0x00000003) #define RTC_BKP_DR4 ((uint32_t)0x00000004) #define RTC_BKP_DR5 ((uint32_t)0x00000005) #define RTC_BKP_DR6 ((uint32_t)0x00000006) #define RTC_BKP_DR7 ((uint32_t)0x00000007) #define RTC_BKP_DR8 ((uint32_t)0x00000008) #define RTC_BKP_DR9 ((uint32_t)0x00000009) #define RTC_BKP_DR10 ((uint32_t)0x0000000A) #define RTC_BKP_DR11 ((uint32_t)0x0000000B) #define RTC_BKP_DR12 ((uint32_t)0x0000000C) #define RTC_BKP_DR13 ((uint32_t)0x0000000D) #define RTC_BKP_DR14 ((uint32_t)0x0000000E) #define RTC_BKP_DR15 ((uint32_t)0x0000000F) #define RTC_BKP_DR16 ((uint32_t)0x00000010) #define RTC_BKP_DR17 ((uint32_t)0x00000011) #define RTC_BKP_DR18 ((uint32_t)0x00000012) #define RTC_BKP_DR19 ((uint32_t)0x00000013) #define RTC_BKP_DR20 ((uint32_t)0x00000014) #define RTC_BKP_DR21 ((uint32_t)0x00000015) #define RTC_BKP_DR22 ((uint32_t)0x00000016) #define RTC_BKP_DR23 ((uint32_t)0x00000017) #define RTC_BKP_DR24 ((uint32_t)0x00000018) #define RTC_BKP_DR25 ((uint32_t)0x00000019) #define RTC_BKP_DR26 ((uint32_t)0x0000001A) #define RTC_BKP_DR27 ((uint32_t)0x0000001B) #define RTC_BKP_DR28 ((uint32_t)0x0000001C) #define RTC_BKP_DR29 ((uint32_t)0x0000001D) #define RTC_BKP_DR30 ((uint32_t)0x0000001E) #define RTC_BKP_DR31 ((uint32_t)0x0000001F) /** * @} */ /** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definitions * @{ */ #define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000) #define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008) /** * @} */ /** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definitions * @{ */ #define RTC_TAMPER_1 RTC_TAMPCR_TAMP1E #define RTC_TAMPER_2 RTC_TAMPCR_TAMP2E #define RTC_TAMPER_3 RTC_TAMPCR_TAMP3E /** * @} */ /** @defgroup RTCEx_Tamper_Interrupt_Definitions RTCEx Tamper Interrupt Definitions * @{ */ #define RTC_TAMPER1_INTERRUPT RTC_TAMPCR_TAMP1IE #define RTC_TAMPER2_INTERRUPT RTC_TAMPCR_TAMP2IE #define RTC_TAMPER3_INTERRUPT RTC_TAMPCR_TAMP3IE #define RTC_ALL_TAMPER_INTERRUPT RTC_TAMPCR_TAMPIE /** * @} */ /** @defgroup RTCEx_TimeStamp_Pin_Selection RTCEx TimeStamp Pin Selection * @{ */ #define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000) #define RTC_TIMESTAMPPIN_POS1 ((uint32_t)0x00000002) #define RTC_TIMESTAMPPIN_POS2 ((uint32_t)0x00000004) /** * @} */ /** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definitions * @{ */ #define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000) #define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002) #define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE #define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE /** * @} */ /** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTCEx Tamper EraseBackUp Definitions * @{ */ #define RTC_TAMPER_ERASE_BACKUP_ENABLE ((uint32_t)0x00000000) #define RTC_TAMPER_ERASE_BACKUP_DISABLE ((uint32_t)0x00020000) /** * @} */ /** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTCEx Tamper MaskFlag Definitions * @{ */ #define RTC_TAMPERMASK_FLAG_DISABLE ((uint32_t)0x00000000) #define RTC_TAMPERMASK_FLAG_ENABLE ((uint32_t)0x00040000) /** * @} */ /** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definitions * @{ */ #define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */ #define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2 consecutive samples at the active level */ #define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4 consecutive samples at the active level */ #define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8 consecutive samples at the active leve. */ /** * @} */ /** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definitions * @{ */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */ /** * @} */ /** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definitions * @{ */ #define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */ #define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */ #define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */ #define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */ /** * @} */ /** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definitions * @{ */ #define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAMPCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */ #define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */ /** * @} */ /** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definitions * @{ */ #define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */ #define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAMPCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */ /** * @} */ /** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions * @{ */ #define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000) #define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001) #define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002) #define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003) #define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004) #define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006) /** * @} */ /** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions * @{ */ #define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibration period is 32s, else 2exp20 RTCCLK seconds */ #define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibration period is 16s, else 2exp19 RTCCLK seconds */ #define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibration period is 8s, else 2exp18 RTCCLK seconds */ /** * @} */ /** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions * @{ */ #define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added during a X -second window = Y - CALM[8:0] with Y = 512, 256, 128 when X = 32, 16, 8 */ #define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited during a 32-second window = CALM[8:0] */ /** * @} */ /** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTCEx Add 1 Second Parameter Definitions * @{ */ #define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000) #define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000) /** * @} */ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions * @{ */ #define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000) #define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000) /** * @} */ /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros * @{ */ /** * @brief Enable the RTC WakeUp Timer peripheral. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) /** * @brief Disable the RTC WakeUp Timer peripheral. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) /** * @brief Enable the RTC WakeUpTimer interrupt. * @param __HANDLE__: specifies the RTC handle. * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. * This parameter can be: * @arg RTC_IT_WUT: WakeUpTimer interrupt * @retval None */ #define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) /** * @brief Disable the RTC WakeUpTimer interrupt. * @param __HANDLE__: specifies the RTC handle. * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. * This parameter can be: * @arg RTC_IT_WUT: WakeUpTimer interrupt * @retval None */ #define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) /** * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. * @param __HANDLE__: specifies the RTC handle. * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to check. * This parameter can be: * @arg RTC_IT_WUT: WakeUpTimer interrupt * @retval None */ #define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET) /** * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. * @param __HANDLE__: specifies the RTC handle. * @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check. * This parameter can be: * @arg RTC_IT_WUT: WakeUpTimer interrupt * @retval None */ #define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) /** * @brief Get the selected RTC WakeUpTimer's flag status. * @param __HANDLE__: specifies the RTC handle. * @param __FLAG__: specifies the RTC WakeUpTimer Flag is pending or not. * This parameter can be: * @arg RTC_FLAG_WUTF * @arg RTC_FLAG_WUTWF * @retval None */ #define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET) /** * @brief Clear the RTC Wake Up timer's pending flags. * @param __HANDLE__: specifies the RTC handle. * @param __FLAG__: specifies the RTC WakeUpTimer Flag to clear. * This parameter can be: * @arg RTC_FLAG_WUTF * @retval None */ #define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) /** * @brief Enable the RTC Tamper1 input detection. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E)) /** * @brief Disable the RTC Tamper1 input detection. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E)) /** * @brief Enable the RTC Tamper2 input detection. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP2E)) /** * @brief Disable the RTC Tamper2 input detection. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP2E)) /** * @brief Enable the RTC Tamper3 input detection. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP3E)) /** * @brief Disable the RTC Tamper3 input detection. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E)) /** * @brief Check whether the specified RTC Tamper interrupt has occurred or not. * @param __HANDLE__: specifies the RTC handle. * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check. * This parameter can be: * @arg RTC_IT_TAMP: All tampers interrupts * @arg RTC_IT_TAMP1: Tamper1 interrupt * @arg RTC_IT_TAMP2: Tamper2 interrupt * @arg RTC_IT_TAMP3: Tamper3 interrupt * @retval None */ #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3)) != RESET) ? SET : RESET) : \ ((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5)) != RESET) ? SET : RESET) : \ (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7)) != RESET) ? SET : RESET)) /** * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. * @param __HANDLE__: specifies the RTC handle. * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check. * This parameter can be: * @arg RTC_IT_TAMP: All tampers interrupts * @arg RTC_IT_TAMP1: Tamper1 interrupt * @arg RTC_IT_TAMP2: Tamper2 interrupt * @arg RTC_IT_TAMP3: Tamper3 interrupt * @retval None */ #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET) /** * @brief Get the selected RTC Tamper's flag status. * @param __HANDLE__: specifies the RTC handle. * @param __FLAG__: specifies the RTC Tamper Flag is pending or not. * This parameter can be: * @arg RTC_FLAG_TAMP1F: Tamper1 flag * @arg RTC_FLAG_TAMP2F: Tamper2 flag * @arg RTC_FLAG_TAMP3F: Tamper3 flag * @retval None */ #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET) /** * @brief Clear the RTC Tamper's pending flags. * @param __HANDLE__: specifies the RTC handle. * @param __FLAG__: specifies the RTC Tamper Flag sources to clear. * This parameter can be: * @arg RTC_FLAG_TAMP1F: Tamper1 flag * @arg RTC_FLAG_TAMP2F: Tamper2 flag * @arg RTC_FLAG_TAMP3F: Tamper3 flag * @retval None */ #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) /** * @brief Enable the RTC TimeStamp peripheral. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) /** * @brief Disable the RTC TimeStamp peripheral. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) /** * @brief Enable the RTC TimeStamp interrupt. * @param __HANDLE__: specifies the RTC handle. * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled. * This parameter can be: * @arg RTC_IT_TS: TimeStamp interrupt * @retval None */ #define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) /** * @brief Disable the RTC TimeStamp interrupt. * @param __HANDLE__: specifies the RTC handle. * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled. * This parameter can be: * @arg RTC_IT_TS: TimeStamp interrupt * @retval None */ #define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) /** * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. * @param __HANDLE__: specifies the RTC handle. * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to check. * This parameter can be: * @arg RTC_IT_TS: TimeStamp interrupt * @retval None */ #define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET) /** * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. * @param __HANDLE__: specifies the RTC handle. * @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check. * This parameter can be: * @arg RTC_IT_TS: TimeStamp interrupt * @retval None */ #define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) /** * @brief Get the selected RTC TimeStamp's flag status. * @param __HANDLE__: specifies the RTC handle. * @param __FLAG__: specifies the RTC TimeStamp Flag is pending or not. * This parameter can be: * @arg RTC_FLAG_TSF * @arg RTC_FLAG_TSOVF * @retval None */ #define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET) /** * @brief Clear the RTC Time Stamp's pending flags. * @param __HANDLE__: specifies the RTC handle. * @param __FLAG__: specifies the RTC Alarm Flag sources to clear. * This parameter can be: * @arg RTC_FLAG_TSF * @arg RTC_FLAG_TSOVF * @retval None */ #define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) /** * @brief Enable the RTC internal TimeStamp peripheral. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE)) /** * @brief Disable the RTC internal TimeStamp peripheral. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE)) /** * @brief Get the selected RTC Internal Time Stamp's flag status. * @param __HANDLE__: specifies the RTC handle. * @param __FLAG__: specifies the RTC Internal Time Stamp Flag is pending or not. * This parameter can be: * @arg RTC_FLAG_ITSF * @retval None */ #define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET) /** * @brief Clear the RTC Internal Time Stamp's pending flags. * @param __HANDLE__: specifies the RTC handle. * @param __FLAG__: specifies the RTC Internal Time Stamp Flag source to clear. * This parameter can be: * @arg RTC_FLAG_ITSF * @retval None */ #define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0003FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) /** * @brief Enable the RTC calibration output. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) /** * @brief Disable the calibration output. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) /** * @brief Enable the clock reference detection. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) /** * @brief Disable the clock reference detection. * @param __HANDLE__: specifies the RTC handle. * @retval None */ #define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) /** * @brief Get the selected RTC shift operation's flag status. * @param __HANDLE__: specifies the RTC handle. * @param __FLAG__: specifies the RTC shift operation Flag is pending or not. * This parameter can be: * @arg RTC_FLAG_SHPF * @retval None */ #define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET) /** * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) /** * @brief Enable event on the RTC WakeUp Timer associated Exti line. * @retval None. */ #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Disable event on the RTC WakeUp Timer associated Exti line. * @retval None. */ #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) /** * @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line. * @retval None. */ #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line. * @retval None. */ #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) /** * @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line. * @retval None. */ #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line. * @retval None. */ #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) /** * @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. * @retval None. */ #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); /** * @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line. * This parameter can be: * @retval None. */ #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); /** * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not. * @retval Line Status. */ #define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Clear the RTC WakeUp Timer associated Exti line flag. * @retval None. */ #define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line. * @retval None. */ #define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) /** * @brief Enable event on the RTC Tamper and Timestamp associated Exti line. * @retval None. */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @brief Disable event on the RTC Tamper and Timestamp associated Exti line. * @retval None. */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) /** * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. * @retval None. */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. * @retval None. */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) /** * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. * @retval None. */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. * @retval None. */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) /** * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. * @retval None. */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); /** * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. * This parameter can be: * @retval None. */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); /** * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not. * @retval Line Status. */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @brief Clear the RTC Tamper and Timestamp associated Exti line flag. * @retval None. */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line * @retval None. */ #define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions * @{ */ /** @addtogroup RTCEx_Exported_Functions_Group1 * @{ */ /* RTC TimeStamp and Tamper functions *****************************************/ HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); /** * @} */ /** @addtogroup RTCEx_Exported_Functions_Group2 * @{ */ /* RTC Wake-up functions ******************************************************/ HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); /** * @} */ /** @addtogroup RTCEx_Exported_Functions_Group3 * @{ */ /* Extension Control functions ************************************************/ void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue); HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); /** * @} */ /** @addtogroup RTCEx_Exported_Functions_Group4 * @{ */ /* Extension RTC features functions *******************************************/ void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @defgroup RTCEx_Private_Constants RTCEx Private Constants * @{ */ #define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */ #define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */ /** * @} */ /* Private constants ---------------------------------------------------------*/ /** @defgroup RTCEx_Private_Constants RTCEx Private Constants * @{ */ /* Masks Definition */ #define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP3E | RTC_TAMPCR_TAMP2E | RTC_TAMPCR_TAMP1E)) #define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER1_INTERRUPT | RTC_TAMPER2_INTERRUPT | RTC_TAMPER3_INTERRUPT)) /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup RTCEx_Private_Macros RTCEx Private Macros * @{ */ /** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters * @{ */ #define IS_RTC_OUTPUT(__OUTPUT__) (((__OUTPUT__) == RTC_OUTPUT_DISABLE) || \ ((__OUTPUT__) == RTC_OUTPUT_ALARMA) || \ ((__OUTPUT__) == RTC_OUTPUT_ALARMB) || \ ((__OUTPUT__) == RTC_OUTPUT_WAKEUP)) #define IS_RTC_BKP(__BKP__) ((__BKP__) < (uint32_t) RTC_BKP_NUMBER) #define IS_TIMESTAMP_EDGE(__EDGE__) (((__EDGE__) == RTC_TIMESTAMPEDGE_RISING) || \ ((__EDGE__) == RTC_TIMESTAMPEDGE_FALLING)) #define IS_RTC_TAMPER(__TAMPER__) ((((__TAMPER__) & ((uint32_t)(0xFFFFFFFF ^ RTC_TAMPCR_TAMPXE))) == 0x00) && ((__TAMPER__) != (uint32_t)RESET)) #define IS_RTC_TAMPER_INTERRUPT(__INTERRUPT__) ((((__INTERRUPT__) & (uint32_t)(0xFFFFFFFF ^ RTC_TAMPCR_TAMPXIE)) == 0x00) && ((__INTERRUPT__) != (uint32_t)RESET)) #define IS_RTC_TIMESTAMP_PIN(__PIN__) (((__PIN__) == RTC_TIMESTAMPPIN_DEFAULT) || \ ((__PIN__) == RTC_TIMESTAMPPIN_POS1) || \ ((__PIN__) == RTC_TIMESTAMPPIN_POS2)) #define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ ((__TRIGGER__) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ ((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL)) #define IS_RTC_TAMPER_ERASE_MODE(__MODE__) (((__MODE__) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \ ((__MODE__) == RTC_TAMPER_ERASE_BACKUP_DISABLE)) #define IS_RTC_TAMPER_MASKFLAG_STATE(__STATE__) (((__STATE__) == RTC_TAMPERMASK_FLAG_ENABLE) || \ ((__STATE__) == RTC_TAMPERMASK_FLAG_DISABLE)) #define IS_RTC_TAMPER_FILTER(__FILTER__) (((__FILTER__) == RTC_TAMPERFILTER_DISABLE) || \ ((__FILTER__) == RTC_TAMPERFILTER_2SAMPLE) || \ ((__FILTER__) == RTC_TAMPERFILTER_4SAMPLE) || \ ((__FILTER__) == RTC_TAMPERFILTER_8SAMPLE)) #define IS_RTC_TAMPER_SAMPLING_FREQ(__FREQ__) (((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) #define IS_RTC_TAMPER_PRECHARGE_DURATION(__DURATION__) (((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) #define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(__DETECTION__) (((__DETECTION__) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ ((__DETECTION__) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) #define IS_RTC_TAMPER_PULLUP_STATE(__STATE__) (((__STATE__) == RTC_TAMPER_PULLUP_ENABLE) || \ ((__STATE__) == RTC_TAMPER_PULLUP_DISABLE)) #define IS_RTC_WAKEUP_CLOCK(__CLOCK__) (((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ ((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ ((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ ((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ ((__CLOCK__) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ ((__CLOCK__) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) #define IS_RTC_WAKEUP_COUNTER(__COUNTER__) ((__COUNTER__) <= 0xFFFF) #define IS_RTC_SMOOTH_CALIB_PERIOD(__PERIOD__) (((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ ((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ ((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_8SEC)) #define IS_RTC_SMOOTH_CALIB_PLUS(__PLUS__) (((__PLUS__) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ ((__PLUS__) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) #define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x000001FF) #define IS_RTC_SHIFT_ADD1S(__SEL__) (((__SEL__) == RTC_SHIFTADD1S_RESET) || \ ((__SEL__) == RTC_SHIFTADD1S_SET)) #define IS_RTC_SHIFT_SUBFS(__FS__) ((__FS__) <= 0x00007FFF) #define IS_RTC_CALIB_OUTPUT(__OUTPUT__) (((__OUTPUT__) == RTC_CALIBOUTPUT_512HZ) || \ ((__OUTPUT__) == RTC_CALIBOUTPUT_1HZ)) /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F7xx_HAL_RTC_EX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/