SPKT
Diff: targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_spdifrx.h
- Revision:
- 0:e87aa4c49e95
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_spdifrx.h Tue Jun 04 21:51:46 2019 +0000 @@ -0,0 +1,556 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_spdifrx.h + * @author MCD Application Team + * @version V1.0.4 + * @date 09-December-2015 + * @brief Header file of SPDIFRX HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_SPDIFRX_H +#define __STM32F7xx_HAL_SPDIFRX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_hal_def.h" + +/** @addtogroup STM32F7xx_HAL_Driver + * @{ + */ + +/** @addtogroup SPDIFRX + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types + * @{ + */ + +/** + * @brief SPDIFRX Init structure definition + */ +typedef struct +{ + uint32_t InputSelection; /*!< Specifies the SPDIF input selection. + This parameter can be a value of @ref SPDIFRX_Input_Selection */ + + uint32_t Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase. + This parameter can be a value of @ref SPDIFRX_Max_Retries */ + + uint32_t WaitForActivity; /*!< Specifies the wait for activity on SPDIF selected input. + This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */ + + uint32_t ChannelSelection; /*!< Specifies whether the control flow will take the channel status from channel A or B. + This parameter can be a value of @ref SPDIFRX_Channel_Selection */ + + uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). + This parameter can be a value of @ref SPDIFRX_Data_Format */ + + uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. + This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ + + uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame. + This parameter can be a value of @ref SPDIFRX_PT_Mask */ + + uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame. + This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ + + uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. + This parameter can be a value of @ref SPDIFRX_V_Mask */ + + uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame. + This parameter can be a value of @ref SPDIFRX_PE_Mask */ + +}SPDIFRX_InitTypeDef; + +/** + * @brief SPDIFRX SetDataFormat structure definition + */ +typedef struct +{ + uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). + This parameter can be a value of @ref SPDIFRX_Data_Format */ + + uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. + This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ + + uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame. + This parameter can be a value of @ref SPDIFRX_PT_Mask */ + + uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame. + This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ + + uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. + This parameter can be a value of @ref SPDIFRX_V_Mask */ + + uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame. + This parameter can be a value of @ref SPDIFRX_PE_Mask */ + +}SPDIFRX_SetDataFormatTypeDef; + +/** + * @brief HAL State structures definition + */ +typedef enum +{ + HAL_SPDIFRX_STATE_RESET = 0x00, /*!< SPDIFRX not yet initialized or disabled */ + HAL_SPDIFRX_STATE_READY = 0x01, /*!< SPDIFRX initialized and ready for use */ + HAL_SPDIFRX_STATE_BUSY = 0x02, /*!< SPDIFRX internal process is ongoing */ + HAL_SPDIFRX_STATE_BUSY_RX = 0x03, /*!< SPDIFRX internal Data Flow RX process is ongoing */ + HAL_SPDIFRX_STATE_BUSY_CX = 0x04, /*!< SPDIFRX internal Control Flow RX process is ongoing */ + HAL_SPDIFRX_STATE_ERROR = 0x07 /*!< SPDIFRX error state */ +}HAL_SPDIFRX_StateTypeDef; + +/** + * @brief SPDIFRX handle Structure definition + */ +typedef struct +{ + SPDIFRX_TypeDef *Instance; /* SPDIFRX registers base address */ + + SPDIFRX_InitTypeDef Init; /* SPDIFRX communication parameters */ + + uint32_t *pRxBuffPtr; /* Pointer to SPDIFRX Rx transfer buffer */ + + uint32_t *pCsBuffPtr; /* Pointer to SPDIFRX Cx transfer buffer */ + + __IO uint16_t RxXferSize; /* SPDIFRX Rx transfer size */ + + __IO uint16_t RxXferCount; /* SPDIFRX Rx transfer counter + (This field is initialized at the + same value as transfer size at the + beginning of the transfer and + decremented when a sample is received. + NbSamplesReceived = RxBufferSize-RxBufferCount) */ + + __IO uint16_t CsXferSize; /* SPDIFRX Rx transfer size */ + + __IO uint16_t CsXferCount; /* SPDIFRX Rx transfer counter + (This field is initialized at the + same value as transfer size at the + beginning of the transfer and + decremented when a sample is received. + NbSamplesReceived = RxBufferSize-RxBufferCount) */ + + DMA_HandleTypeDef *hdmaCsRx; /* SPDIFRX EC60958_channel_status and user_information DMA handle parameters */ + + DMA_HandleTypeDef *hdmaDrRx; /* SPDIFRX Rx DMA handle parameters */ + + __IO HAL_LockTypeDef Lock; /* SPDIFRX locking object */ + + __IO HAL_SPDIFRX_StateTypeDef State; /* SPDIFRX communication state */ + + __IO uint32_t ErrorCode; /* SPDIFRX Error code */ + +}SPDIFRX_HandleTypeDef; +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants + * @{ + */ +/** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code + * @{ + */ +#define HAL_SPDIFRX_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ +#define HAL_SPDIFRX_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */ +#define HAL_SPDIFRX_ERROR_OVR ((uint32_t)0x00000002) /*!< OVR error */ +#define HAL_SPDIFRX_ERROR_PE ((uint32_t)0x00000004) /*!< Parity error */ +#define HAL_SPDIFRX_ERROR_DMA ((uint32_t)0x00000008) /*!< DMA transfer error */ +#define HAL_SPDIFRX_ERROR_UNKNOWN ((uint32_t)0x00000010) /*!< Unknown Error error */ +/** + * @} + */ + +/** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection + * @{ + */ +#define SPDIFRX_INPUT_IN0 ((uint32_t)0x00000000) +#define SPDIFRX_INPUT_IN1 ((uint32_t)0x00010000) +#define SPDIFRX_INPUT_IN2 ((uint32_t)0x00020000) +#define SPDIFRX_INPUT_IN3 ((uint32_t)0x00030000) +/** + * @} + */ + +/** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries + * @{ + */ +#define SPDIFRX_MAXRETRIES_NONE ((uint32_t)0x00000000) +#define SPDIFRX_MAXRETRIES_3 ((uint32_t)0x00001000) +#define SPDIFRX_MAXRETRIES_15 ((uint32_t)0x00002000) +#define SPDIFRX_MAXRETRIES_63 ((uint32_t)0x00003000) +/** + * @} + */ + +/** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity + * @{ + */ +#define SPDIFRX_WAITFORACTIVITY_OFF ((uint32_t)0x00000000) +#define SPDIFRX_WAITFORACTIVITY_ON ((uint32_t)SPDIFRX_CR_WFA) +/** + * @} + */ + +/** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask +* @{ +*/ +#define SPDIFRX_PREAMBLETYPEMASK_OFF ((uint32_t)0x00000000) +#define SPDIFRX_PREAMBLETYPEMASK_ON ((uint32_t)SPDIFRX_CR_PTMSK) +/** + * @} + */ + +/** @defgroup SPDIFRX_ChannelStatus_Mask SPDIFRX Channel Status Mask +* @{ +*/ +#define SPDIFRX_CHANNELSTATUS_OFF ((uint32_t)0x00000000) /* The channel status and user bits are copied into the SPDIF_DR */ +#define SPDIFRX_CHANNELSTATUS_ON ((uint32_t)SPDIFRX_CR_CUMSK) /* The channel status and user bits are not copied into the SPDIF_DR, zeros are written instead*/ +/** + * @} + */ + +/** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask +* @{ +*/ +#define SPDIFRX_VALIDITYMASK_OFF ((uint32_t)0x00000000) +#define SPDIFRX_VALIDITYMASK_ON ((uint32_t)SPDIFRX_CR_VMSK) +/** + * @} + */ + +/** @defgroup SPDIFRX_PE_Mask SPDIFRX Parity Error Mask +* @{ +*/ +#define SPDIFRX_PARITYERRORMASK_OFF ((uint32_t)0x00000000) +#define SPDIFRX_PARITYERRORMASK_ON ((uint32_t)SPDIFRX_CR_PMSK) +/** + * @} + */ + +/** @defgroup SPDIFRX_Channel_Selection SPDIFRX Channel Selection + * @{ + */ +#define SPDIFRX_CHANNEL_A ((uint32_t)0x00000000) +#define SPDIFRX_CHANNEL_B ((uint32_t)SPDIFRX_CR_CHSEL) +/** + * @} + */ + +/** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format + * @{ + */ +#define SPDIFRX_DATAFORMAT_LSB ((uint32_t)0x00000000) +#define SPDIFRX_DATAFORMAT_MSB ((uint32_t)0x00000010) +#define SPDIFRX_DATAFORMAT_32BITS ((uint32_t)0x00000020) +/** + * @} + */ + +/** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode + * @{ + */ +#define SPDIFRX_STEREOMODE_DISABLE ((uint32_t)0x00000000) +#define SPDIFRX_STEREOMODE_ENABLE ((uint32_t)SPDIFRX_CR_RXSTEO) +/** + * @} + */ + +/** @defgroup SPDIFRX_State SPDIFRX State + * @{ + */ + +#define SPDIFRX_STATE_IDLE ((uint32_t)0xFFFFFFFC) +#define SPDIFRX_STATE_SYNC ((uint32_t)0x00000001) +#define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN) +/** + * @} + */ + +/** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition + * @{ + */ +#define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE) +#define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE) +#define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE) +#define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE) +#define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE) +#define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE) +#define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE ) +/** + * @} + */ + +/** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition + * @{ + */ +#define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE) +#define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE) +#define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR) +#define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR) +#define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD) +#define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD) +#define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR) +#define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR) +#define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR) +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros + * @{ + */ + +/** @brief Reset SPDIFRX handle state + * @param __HANDLE__: SPDIFRX handle. + * @retval None + */ +#define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = (uint16_t)SPDIFRX_CR_SPDIFEN) + +/** @brief Disable the specified SPDIFRX peripheral (IDLE State). + * @param __HANDLE__: specifies the SPDIFRX Handle. + * @retval None + */ +#define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE) + +/** @brief Enable the specified SPDIFRX peripheral (SYNC State). + * @param __HANDLE__: specifies the SPDIFRX Handle. + * @retval None + */ +#define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC) + + +/** @brief Enable the specified SPDIFRX peripheral (RCV State). + * @param __HANDLE__: specifies the SPDIFRX Handle. + * @retval None + */ +#define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV) + + +/** @brief Enable or disable the specified SPDIFRX interrupts. + * @param __HANDLE__: specifies the SPDIFRX Handle. + * @param __INTERRUPT__: specifies the interrupt source to enable or disable. + * This parameter can be one of the following values: + * @arg SPDIFRX_IT_RXNE + * @arg SPDIFRX_IT_CSRNE + * @arg SPDIFRX_IT_PERRIE + * @arg SPDIFRX_IT_OVRIE + * @arg SPDIFRX_IT_SBLKIE + * @arg SPDIFRX_IT_SYNCDIE + * @arg SPDIFRX_IT_IFEIE + * @retval None + */ +#define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__)) +#define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (uint16_t)(~(__INTERRUPT__))) + +/** @brief Checks if the specified SPDIFRX interrupt source is enabled or disabled. + * @param __HANDLE__: specifies the SPDIFRX Handle. + * @param __INTERRUPT__: specifies the SPDIFRX interrupt source to check. + * This parameter can be one of the following values: + * @arg SPDIFRX_IT_RXNE + * @arg SPDIFRX_IT_CSRNE + * @arg SPDIFRX_IT_PERRIE + * @arg SPDIFRX_IT_OVRIE + * @arg SPDIFRX_IT_SBLKIE + * @arg SPDIFRX_IT_SYNCDIE + * @arg SPDIFRX_IT_IFEIE + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) + +/** @brief Checks whether the specified SPDIFRX flag is set or not. + * @param __HANDLE__: specifies the SPDIFRX Handle. + * @param __FLAG__: specifies the flag to check. + * This parameter can be one of the following values: + * @arg SPDIFRX_FLAG_RXNE + * @arg SPDIFRX_FLAG_CSRNE + * @arg SPDIFRX_FLAG_PERR + * @arg SPDIFRX_FLAG_OVR + * @arg SPDIFRX_FLAG_SBD + * @arg SPDIFRX_FLAG_SYNCD + * @arg SPDIFRX_FLAG_FERR + * @arg SPDIFRX_FLAG_SERR + * @arg SPDIFRX_FLAG_TERR + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) + +/** @brief Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit. + * @param __HANDLE__: specifies the USART Handle. + * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg SPDIFRX_FLAG_PERR + * @arg SPDIFRX_FLAG_OVR + * @arg SPDIFRX_SR_SBD + * @arg SPDIFRX_SR_SYNCD + * @retval None + */ +#define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__)) + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup SPDIFRX_Exported_Functions + * @{ + */ + +/** @addtogroup SPDIFRX_Exported_Functions_Group1 + * @{ + */ +/* Initialization/de-initialization functions **********************************/ +HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif); +HAL_StatusTypeDef HAL_SPDIFRX_DeInit (SPDIFRX_HandleTypeDef *hspdif); +void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif); +void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif); +HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat); +/** + * @} + */ + +/** @addtogroup SPDIFRX_Exported_Functions_Group2 + * @{ + */ +/* I/O operation functions ***************************************************/ + /* Blocking mode: Polling */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout); + + /* Non-Blocking mode: Interrupt */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); +void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif); + +/* Non-Blocking mode: DMA */ +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); + +HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif); + +/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ +void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); +void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); +void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif); +void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); +void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); +/** + * @} + */ + +/** @addtogroup SPDIFRX_Exported_Functions_Group3 + * @{ + */ +/* Peripheral Control and State functions ************************************/ +HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif); +uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif); +/** + * @} + */ + +/** + * @} + */ +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros + * @{ + */ +#define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_INPUT_IN1) || \ + ((INPUT) == SPDIFRX_INPUT_IN2) || \ + ((INPUT) == SPDIFRX_INPUT_IN3) || \ + ((INPUT) == SPDIFRX_INPUT_IN0)) +#define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_MAXRETRIES_NONE) || \ + ((RET) == SPDIFRX_MAXRETRIES_3) || \ + ((RET) == SPDIFRX_MAXRETRIES_15) || \ + ((RET) == SPDIFRX_MAXRETRIES_63)) +#define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \ + ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF)) +#define IS_PREAMBLE_TYPE_MASK(VAL) (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \ + ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF)) +#define IS_VALIDITY_MASK(VAL) (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \ + ((VAL) == SPDIFRX_VALIDITYMASK_ON)) +#define IS_PARITY_ERROR_MASK(VAL) (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \ + ((VAL) == SPDIFRX_PARITYERRORMASK_ON)) +#define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_CHANNEL_A) || \ + ((CHANNEL) == SPDIFRX_CHANNEL_B)) +#define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \ + ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \ + ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS)) +#define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \ + ((MODE) == SPDIFRX_STEREOMODE_ENABLE)) + +#define IS_CHANNEL_STATUS_MASK(VAL) (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \ + ((VAL) == SPDIFRX_CHANNELSTATUS_OFF)) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions + * @{ + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F7xx_HAL_SPDIFRX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/