intiial commit
Dependencies: MAX8614X USBDevice max32630hsp_test
main.cpp
- Committer:
- phonemacro
- Date:
- 2018-08-10
- Revision:
- 0:9e5a4f845510
- Child:
- 1:854f8a89a527
File content as of revision 0:9e5a4f845510:
/********************************************************************** * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Except as contained in this notice, the name of Maxim Integrated * Products, Inc. shall not be used except as stated in the Maxim Integrated * Products, Inc. Branding Policy. * * The mere transfer of this software does not imply any licenses * of trade secrets, proprietary technology, copyrights, patents, * trademarks, maskwork rights, or any other form of intellectual * property whatsoever. Maxim Integrated Products, Inc. retains all * ownership rights. **********************************************************************/ #include "mbed.h" //#include "max32630fthr.h" #include "max32630hsp.h" #include "bmi160.h" #include "MAX8614X.h" #include "USBSerial.h" void dumpImuRegisters(BMI160 &imu); void printRegister(BMI160 &imu, BMI160::Registers reg); void printBlock(BMI160 &imu, BMI160::Registers startReg, BMI160::Registers stopReg); MAX32630HSP icarus(MAX32630HSP::VIO_1V8); // MAX32630FTHR mbed_board(MAX32630FTHR::VIO_1V8); SPI spi(P5_1, P5_2, P5_0); /* mosi, miso, sclk */ DigitalOut cs(P3_0); PinName interrupt_pin = P5_4; // Virtual serial port over USB USBSerial microUSB; DigitalOut rLED(LED1); DigitalOut gLED(LED2); DigitalOut bLED(LED3); int main() { uint8_t data[1]; int c; // daplink.printf("daplink serial port\r\n"); // microUSB.printf("micro USB serial port\r\n"); rLED = LED_ON; gLED = LED_ON; bLED = LED_OFF; rLED = LED_OFF; printf("max86140\n\r"); wait(3.0); printf("max86140\n\r"); MAX8614X m(spi,cs,interrupt_pin); wait(1.0); wait(1.0); m.readRegister(0xff, data, 1); printf("device id should be 0x24, read val = %x\n\r", data[0]); m.readRegister(0x01, data, 1); printf("read val = %x\n\r", data[0]); while(1) { // c = microUSB.getc(); // microUSB.putc(c); // daplink.putc(c); bLED = !bLED; wait(1.0); } } #if 0 MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3); DigitalOut rLED(LED1, LED_OFF); DigitalOut gLED(LED2, LED_OFF); DigitalOut bLED(LED3, LED_OFF); I2C i2cBus(P5_7, P6_0); i2cBus.frequency(400000); BMI160_I2C imu(i2cBus, BMI160_I2C::I2C_ADRS_SDO_LO); printf("\033[H"); //home printf("\033[0J"); //erase from cursor to end of screen uint32_t failures = 0; if(imu.setSensorPowerMode(BMI160::GYRO, BMI160::NORMAL) != BMI160::RTN_NO_ERROR) { printf("Failed to set gyroscope power mode\n"); failures++; } wait_ms(100); if(imu.setSensorPowerMode(BMI160::ACC, BMI160::NORMAL) != BMI160::RTN_NO_ERROR) { printf("Failed to set accelerometer power mode\n"); failures++; } wait_ms(100); BMI160::AccConfig accConfig; //example of using getSensorConfig if(imu.getSensorConfig(accConfig) == BMI160::RTN_NO_ERROR) { printf("ACC Range = %d\n", accConfig.range); printf("ACC UnderSampling = %d\n", accConfig.us); printf("ACC BandWidthParam = %d\n", accConfig.bwp); printf("ACC OutputDataRate = %d\n\n", accConfig.odr); } else { printf("Failed to get accelerometer configuration\n"); failures++; } //example of setting user defined configuration accConfig.range = BMI160::SENS_4G; accConfig.us = BMI160::ACC_US_OFF; accConfig.bwp = BMI160::ACC_BWP_2; accConfig.odr = BMI160::ACC_ODR_8; if(imu.setSensorConfig(accConfig) == BMI160::RTN_NO_ERROR) { printf("ACC Range = %d\n", accConfig.range); printf("ACC UnderSampling = %d\n", accConfig.us); printf("ACC BandWidthParam = %d\n", accConfig.bwp); printf("ACC OutputDataRate = %d\n\n", accConfig.odr); } else { printf("Failed to set accelerometer configuration\n"); failures++; } BMI160::GyroConfig gyroConfig; if(imu.getSensorConfig(gyroConfig) == BMI160::RTN_NO_ERROR) { printf("GYRO Range = %d\n", gyroConfig.range); printf("GYRO BandWidthParam = %d\n", gyroConfig.bwp); printf("GYRO OutputDataRate = %d\n\n", gyroConfig.odr); } else { printf("Failed to get gyroscope configuration\n"); failures++; } wait(1.0); printf("\033[H"); //home printf("\033[0J"); //erase from cursor to end of screen if(failures == 0) { float imuTemperature; BMI160::SensorData accData; BMI160::SensorData gyroData; BMI160::SensorTime sensorTime; while(1) { imu.getGyroAccXYZandSensorTime(accData, gyroData, sensorTime, accConfig.range, gyroConfig.range); imu.getTemperature(&imuTemperature); printf("ACC xAxis = %s%4.3f\n", "\033[K", accData.xAxis.scaled); printf("ACC yAxis = %s%4.3f\n", "\033[K", accData.yAxis.scaled); printf("ACC zAxis = %s%4.3f\n\n", "\033[K", accData.zAxis.scaled); printf("GYRO xAxis = %s%5.1f\n", "\033[K", gyroData.xAxis.scaled); printf("GYRO yAxis = %s%5.1f\n", "\033[K", gyroData.yAxis.scaled); printf("GYRO zAxis = %s%5.1f\n\n", "\033[K", gyroData.zAxis.scaled); printf("Sensor Time = %s%f\n", "\033[K", sensorTime.seconds); printf("Sensor Temperature = %s%5.3f\n", "\033[K", imuTemperature); printf("\033[H"); //home gLED = !gLED; } } else { while(1) { rLED = !rLED; wait(0.25); } } } //***************************************************************************** void dumpImuRegisters(BMI160 &imu) { printRegister(imu, BMI160::CHIP_ID); printBlock(imu, BMI160::ERR_REG,BMI160::FIFO_DATA); printBlock(imu, BMI160::ACC_CONF, BMI160::FIFO_CONFIG_1); printBlock(imu, BMI160::MAG_IF_0, BMI160::SELF_TEST); printBlock(imu, BMI160::NV_CONF, BMI160::STEP_CONF_1); printRegister(imu, BMI160::CMD); printf("\n"); } //***************************************************************************** void printRegister(BMI160 &imu, BMI160::Registers reg) { uint8_t data; if(imu.readRegister(reg, &data) == BMI160::RTN_NO_ERROR) { printf("IMU Register 0x%02x = 0x%02x\n", reg, data); } else { printf("Failed to read register\n"); } } //***************************************************************************** void printBlock(BMI160 &imu, BMI160::Registers startReg, BMI160::Registers stopReg) { uint8_t numBytes = ((stopReg - startReg) + 1); uint8_t buff[numBytes]; uint8_t offset = static_cast<uint8_t>(startReg); if(imu.readBlock(startReg, stopReg, buff) == BMI160::RTN_NO_ERROR) { for(uint8_t idx = offset; idx < (numBytes + offset); idx++) { printf("IMU Register 0x%02x = 0x%02x\n", idx, buff[idx - offset]); } } else { printf("Failed to read block\n"); } } #endif