Simple detection for LE910-NA1 modules
Fork of MTS-Cellular by
Cellular/EasyIP.cpp
- Committer:
- Vanger
- Date:
- 2014-08-11
- Revision:
- 52:2cb58398a4f9
- Parent:
- 51:ffc556ba33f7
- Child:
- 54:a6c738bfc391
File content as of revision 52:2cb58398a4f9:
#include "mbed.h" #include "EasyIP.h" #include "MTSText.h" #include "MTSLog.h" #include "CellUtils.h" using namespace mts; EasyIP::EasyIP(Radio type) { this->type = type; io = NULL; dcd = NULL; dtr = NULL; resetLine = NULL; echoMode = true; pppConnected = false; socketMode = TCP; socketOpened = false; socketCloseable = true; local_port = 0; local_address = ""; host_port = 0; } EasyIP::~EasyIP() { if (dtr != NULL) { dtr->write(1); } delete dcd; delete dtr; delete resetLine; } //Initializes the MTS IO Buffer bool EasyIP::init(MTSBufferedIO* io) { if (! Cellular::init(io)) { return false; } logDebug("radio type: %s", Cellular::getRadioNames(type).c_str()); //Turns on the HW flow control if(sendBasicCommand("AT&K3", 2000) != MTS_SUCCESS) { logWarning("Failed to enable serial flow control"); } return true; } bool EasyIP::connect() { //Check if APN is not set, if it is not, connect will not work. if (type == MTSMC_H5_IP || type == MTSMC_H5 || type == MTSMC_G3) { if(apn.size() == 0) { logDebug("APN is not set"); return false; } } //Check if socket is open if(socketOpened) { return true; } //Check if already connected if(isConnected()) { return true; } Timer tmr; //Check Registration: AT+CREG? == 0,1 tmr.start(); do { Registration registration = getRegistration(); if(registration != REGISTERED) { logTrace("Not Registered [%d] ... waiting", (int)registration); wait(1); } else { break; } } while(tmr.read() < 30); //Check RSSI: AT+CSQ tmr.reset(); do { int rssi = getSignalStrength(); logDebug("Signal strength: %d", rssi); if(rssi == 99 || rssi == -1) { logTrace("No Signal ... waiting"); wait(1); } else { break; } } while(tmr.read() < 30); //Make PPP connection if (type == MTSMC_H5 || type == MTSMC_G3) { logDebug("Making PPP Connection Attempt. APN[%s]", apn.c_str()); } else { logDebug("Making PPP Connection Attempt"); } std::string pppResult = sendCommand("AT#SGACT=1,1", 5000); std::vector<std::string> parts; if(pppResult.find("OK") != std::string::npos) { parts = Text::split(pppResult, "\r\n"); if(parts.size() >= 2) { parts = Text::split(parts[1], " "); local_address = parts[1]; } logInfo("PPP Connection Established: IP[%s]", local_address.c_str()); pppConnected = true; } else { pppResult = sendCommand("AT#SGACT?", 2000); if(pppResult.find("1,1") != std::string::npos) { logDebug("Radio is already connected"); pppConnected = true; } else { logError("PPP connection attempt failed"); pppConnected = false; } } return pppConnected; } void EasyIP::disconnect() { //AT#SGACT=1,0: Close PPP connection logDebug("Closing PPP Connection"); std::string result; Timer tmr; if(socketOpened) { close(); } //Sends AT#SGACT=1,0 command if (sendBasicCommand("AT#SGACT=1,0", 1000) == MTS_SUCCESS) { logDebug("Successfully closed PPP Connection"); } /* Ensure PPP link is down, else ping commands will put radio in unknown state * (Link is not immediate in disconnection, even though OK is returned) */ tmr.start(); while(tmr.read() < 30) { result = sendCommand("AT#SGACT?", 1000); if(result.find("1,0") != std::string::npos) { break; } else if(result.find("ERROR") != std::string::npos) { break; } else { wait(1); } } pppConnected = false; return; } bool EasyIP::isConnected() { enum RadioState {IDLE, CONNECTING, CONNECTED, DISCONNECTED}; //state flags for various connection components bool signal = false, regist = false, active = false; //1) Check if APN was set if we're on an HSPA radio if (type == MTSMC_H5_IP || type == MTSMC_H5 || type == MTSMC_G3) { if(apn.size() == 0) { logDebug("APN is not set"); return false; } } //2) Check that we do not have a live connection up if (socketOpened) { logDebug("Socket is opened"); return true; } //3) Query the radio int rssi = getSignalStrength(); if (rssi == 99 || rssi == -1) { //Signal strength is nonexistent signal = false; } else { signal = true; } Registration creg = getRegistration(); if (creg == REGISTERED) { regist = true; } else { regist = false; } string reply = sendCommand("AT#SGACT?", 500); if (reply.find("1,1") != std::string::npos) { active = true; } else { active = false; } RadioState state; bool ppp = pppConnected; if (signal && regist && active) { //Radio connected state = CONNECTED; pppConnected = true; } else if (signal && !regist && !active) { //Radio idle state = IDLE; pppConnected = false; } else if (active) { //Radio Connecting state = CONNECTING; } else { //Radio Disconnected state = DISCONNECTED; pppConnected = false; } if (!ppp && state == CONNECTED) { logWarning("Internal PPP state tracking differs from radio (DISCONNECTED:CONNECTED)"); } else if (ppp && state != CONNECTED) { logWarning("Internal PPP state tracking differs from radio (CONNECTED:%s)", state); } return pppConnected; } void EasyIP::reset() { disconnect(); if(sendBasicCommand("AT#REBOOT", 10000) != MTS_SUCCESS) { logError("Socket Modem did not accept RESET command"); } else { logWarning("Socket Modem is resetting, allow 30 seconds for it to come back"); return; } } //Binds the socket to a specific port if able bool EasyIP::bind(unsigned int port) { if(socketOpened) { logError("socket is open. Can not set local port"); return false; } if(port > 65535) { logError("port out of range (0-65535)"); return false; } local_port = port; return true; } bool EasyIP::open(const std::string& address, unsigned int port, Mode mode) { char sOpenSocketCmd[256] = {0}; //String for AT command std::string sMode = ""; int typeSocket = 0; int closeType = 0; //1) Check that we do not have a live connection up if(socketOpened) { //Check that the address, port, and mode match if(host_address != address || host_port != port || socketMode != mode) { if(socketMode == TCP) { logError("TCP socket already opened [%s:%d]", host_address.c_str(), host_port); } else { logError("UDP socket already opened [%s:%d]", host_address.c_str(), host_port); } return false; } logDebug("Socket already opened"); return true; } //2) Check Parameters if(port > 65535) { logError("port out of range (0-65535)"); return false; } if(type == MTSMC_EV3) { if(!local_port) { logDebug("Local port set to 1, port 0 not supported for MTSMC_EV3"); local_port = 1; } } //3) Check PPP connection if(!isConnected()) { logError("PPP not established. Attempting to connect"); if(!connect()) { logError("PPP connection failed"); return false; } else { logDebug("PPP connection established"); } } //4) Set escape sequence to not be transmitted if(sendBasicCommand("AT#SKIPESC=1", 2000) != MTS_SUCCESS) { logWarning("Failed to disable escape sequence transmission on data mode suspension"); } if(mode == TCP) { typeSocket = 0; sMode = "TCP"; } else { typeSocket = 1; sMode = "UDP"; } if(socketCloseable) { closeType = 0; } else { closeType = 255; } //5) Open Socket sprintf(sOpenSocketCmd, "AT#SD=1,%d,%d,%s,%d,%d,0", typeSocket, port, address.c_str(),closeType , local_port); std::string response = sendCommand(sOpenSocketCmd, 60000); if(response.find("CONNECT") != std::string::npos) { host_address = address; host_port = port; logInfo("Opened %s Socket [%s:%d]", sMode.c_str(), address.c_str(), port); socketOpened = true; socketMode = mode; } else { logWarning("Unable to open %s Socket [%s:%d]", sMode.c_str(), address.c_str(), port); socketOpened = false; } return socketOpened; } bool EasyIP::isOpen() { if(io->readable()) { logDebug("Assuming open, data available to read."); return true; } return socketOpened; } bool EasyIP::close() { if(io == NULL) { logError("MTSBufferedIO not set"); return false; } if(!socketOpened) { logWarning("Socket close() called, but socket was not open"); return true; } if(!socketCloseable) { logError("Socket is not closeable"); return false; } if(!sendEscapeCommand()) { logError("Failed to exit online mode"); return false; } else { socketOpened = false; } if(sendBasicCommand("AT#SH=1", 2000) != MTS_SUCCESS) { logDebug("Failed to close socket connection"); } Timer tmr; int counter = 0; char tmp[256]; tmr.start(); do { if(socketOpened == false) { break; } read(tmp, 256, 1000); } while(counter++ < 10); io->rxClear(); io->txClear(); return !socketOpened; } int EasyIP::read(char* data, int max, int timeout) { if(io == NULL) { logError("MTSBufferedIO not set"); return -1; } //Check that nothing is in the rx buffer if(!socketOpened && !io->readable()) { logError("Socket is not open"); return -1; } int bytesRead = 0; if(timeout >= 0) { bytesRead = io->read(data, max, static_cast<unsigned int>(timeout)); } else { bytesRead = io->read(data, max); } //Scan for socket closed message if(bytesRead > 0 && socketCloseable) { for(int i = 0; i < bytesRead; i++) { if(data[i] == 'N') { if(strstr(&data[i], "NO CARRIER")) { logTrace("Found socket closed message. Checking validity"); //Close socket and Cut Off End of Message socketOpened = socketCheck(); //Verifies legitimacy of socket disconnect if(socketOpened) { logDebug("Socket still open"); continue; } else { logDebug("Socket closed"); data[i] = '\0'; bytesRead = i; break; } } } } } return bytesRead; } int EasyIP::write(const char* data, int length, int timeout) { if(io == NULL) { logError("MTSBufferedIO not set"); return -1; } if(!socketOpened) { logError("Socket is not open"); return -1; } int bytesWritten = 0; int size = length; int failedWrites = 0; if(timeout >= 0) { Timer tmr; tmr.start(); do { int available = io->writeable(); if (available > 0) { size = MIN(available, length - bytesWritten); bytesWritten += io->write(&data[bytesWritten], size); } else { wait(0.05); } } while (tmr.read_ms() <= timeout && bytesWritten < length); } else { //If timeout is -1: do { int available = io->writeable(); if(available > 0) { size = MIN(available, length - bytesWritten); int currentWritten = io->write(&data[bytesWritten], size); bytesWritten += currentWritten; if(!currentWritten) { failedWrites++; } if(failedWrites > 10) { logError("Couldn't write any characters"); return bytesWritten; } } else { wait(0.05); } } while (bytesWritten < length); } return bytesWritten; } unsigned int EasyIP::readable() { if(io == NULL) { logWarning("MTSBufferedIO not set"); return 0; } if(!socketOpened && !io->readable()) { logWarning("Socket is not open"); return 0; } return io->readable(); } unsigned int EasyIP::writeable() { if(io == NULL) { logWarning("MTSBufferedIO not set"); return 0; } if(!socketOpened) { logWarning("Socket is not open"); return 0; } return io->writeable(); } bool EasyIP::setDeviceIP(std::string address) { if (address.compare("DHCP") == 0) { return true; } else { logWarning("Radio does not support static IPs, using DHCP."); return false; } } Code EasyIP::setApn(const std::string& apn) { if (type == MTSMC_H5 || type == MTSMC_G3) { //Set IP,PPP,IPv6 Code code = sendBasicCommand("AT+CGDCONT=1,PPP," + apn, 1000); if (code != MTS_SUCCESS) { return code; //This will return whatever is not MTS_SUCCESS } this->apn = apn; return code; //This will return MTS_SUCCESS } else { logInfo("CDMA radios don't need an APN"); return MTS_SUCCESS; } } std::string EasyIP::getDeviceIP() { return local_address; } //Turns off echo when it receives a true, turns on when it receives false Code EasyIP::echo(bool state) { Code code; if (state) { code = sendBasicCommand("ATE0", 1000); echoMode = (code == MTS_SUCCESS) ? false : echoMode; } else { code = sendBasicCommand("ATE1", 1000); echoMode = (code == MTS_SUCCESS) ? true : echoMode; } return code; } bool EasyIP::ping(const std::string& address) { char buffer[256] = {0}; std::vector<std::string> parts; int TTL=0; int Timeout=0; //Format parameters for sending to radio sprintf(buffer, "AT#PING=%s,1,32,%d", address.c_str(), (PINGDELAY*10)); for(int pngs=0; pngs<PINGNUM; pngs++) { std::string response = sendCommand(buffer, (PINGDELAY*2000)); //Send 1 ping if(response.empty() || response.find("ERROR") != std::string::npos) { continue; //Skip current loop if send command fails } parts = Text::split(response, "\r\n"); if(parts.size() < 2) { continue; } parts = Text::split(parts[1], ","); if(parts.size() < 4) { continue; } //Parse TTL and Timeout values Timeout = std::atoi(parts[2].c_str()); TTL = std::atoi(parts[3].c_str()); if((Timeout < 600) && (TTL < 255)) { return true; } } return false; } //Pass 1 to enable socket closeable //Pass 0 to disable socket closeable Code EasyIP::setSocketCloseable(bool enabled) { if(socketCloseable == enabled) { return MTS_SUCCESS; } if(socketOpened) { logError("socket is already opened. Can not set closeable"); return MTS_ERROR; } socketCloseable = enabled; return MTS_SUCCESS; } bool EasyIP::sendEscapeCommand() { //string Cellular::sendCommand(const std::string& command, unsigned int timeoutMillis, char esc) if(io == NULL) { logError("MTSBufferedIO not set"); return false; } if(!socketOpened) { logError("Socket is not open."); return false; } if(!socketCloseable) { logError("Socket is not closeable"); return false; } io->rxClear(); io->txClear(); std::string result; unsigned int timeoutMillis = 10000; //Attempt to write command //Format for +++ command is 1 second wait, send +++, then another second wait wait(1.2); if(io->write("+++", 3, timeoutMillis) != 3) { //Failed to write command logError("failed to send command to radio within %d milliseconds", timeoutMillis); return false; } Timer tmr; char tmp[256]; tmp[255] = 0; bool done = false; bool exitmode = false; tmr.start(); do { //Make a non-blocking read call by passing timeout of zero int size = io->read(tmp,255,0); //1 less than allocated (timeout is instant) if(size > 0) { result.append(tmp, size); } if(result.find("OK") != std::string::npos) { exitmode = true; done = true; } else if(result.find("NO CARRIER") != std::string::npos) { socketOpened = false; exitmode = true; done = true; } else if(result.find("ERROR") != std::string::npos) { exitmode = false; done = true; } if(tmr.read_ms() >= timeoutMillis) { logDebug("Escape sequence [+++] timed out after %d milliseconds", timeoutMillis); exitmode = true; done = true; } } while (!done); return exitmode; } bool EasyIP::socketCheck() { bool status = false; int socketInfo = 9; //error enum SocketStatus {SOCKETCLOSED, SOCKETACTIVEDATA, SOCKETSUSPEND, SOCKETSUSPENDDATA, SOCKETLISTEN, SOCKETINCOMING, ERROR = 9}; std::vector<std::string> params; //Goes from data mode to command mode if(sendEscapeCommand()) { std::string reply = sendCommand("AT#SS=1", 2000); if(reply.find("OK") != std::string::npos) { //Found valid response params = Text::split(reply, "\r\n"); params = Text::split(params[1], ","); socketInfo = atoi(params[1].c_str()); } else { logError("Could not determine socket status[%d]",socketInfo); socketInfo = 9; //9 is unrecognized } } else { status = false; //Return value of socketOpened when checking } //Check socket status query if(socketInfo < 5 && socketInfo > 0) { //Socket opened responses status = true; } else if(socketInfo == SOCKETCLOSED || socketInfo == SOCKETINCOMING) { status = false; } else { logError("Could not determine socket status"); status = false; } //Reconnect to active socket if able if(status) { std::string reconnect = sendCommand("AT#SO=1", 2000); if(reconnect.find("CONNECT") != std::string::npos || reconnect.find("OK") != std::string::npos) { } else { logError("Failed to resume socket connection"); } } return status; }