Diff: aws-iot/include/aws_iot_mqtt_client.h

Revision:

0:cd5404401c2f

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/aws-iot/include/aws_iot_mqtt_client.h	Wed Apr 12 14:07:09 2017 +0200
@@ -0,0 +1,418 @@
+/*
+ * Copyright 2010-2015 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License").
+ * You may not use this file except in compliance with the License.
+ * A copy of the License is located at
+ *
+ *  http://aws.amazon.com/apache2.0
+ *
+ * or in the "license" file accompanying this file. This file is distributed
+ * on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
+ * express or implied. See the License for the specific language governing
+ * permissions and limitations under the License.
+ */
+
+// Based on Eclipse Paho.
+/*******************************************************************************
+ * Copyright (c) 2014 IBM Corp.
+ *
+ * All rights reserved. This program and the accompanying materials
+ * are made available under the terms of the Eclipse Public License v1.0
+ * and Eclipse Distribution License v1.0 which accompany this distribution.
+ *
+ * The Eclipse Public License is available at
+ *    http://www.eclipse.org/legal/epl-v10.html
+ * and the Eclipse Distribution License is available at
+ *   http://www.eclipse.org/org/documents/edl-v10.php.
+ *
+ * Contributors:
+ *    Ian Craggs - initial API and implementation and/or initial documentation
+ *    Xiang Rong - 442039 Add makefile to Embedded C client
+ *******************************************************************************/
+
+/**
+ * @file aws_iot_mqtt_client.h
+ * @brief Client definition for MQTT
+ */
+
+#ifndef AWS_IOT_SDK_SRC_IOT_MQTT_CLIENT_H
+#define AWS_IOT_SDK_SRC_IOT_MQTT_CLIENT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Library Header files */
+#include "stdio.h"
+#include "stdbool.h"
+#include "stdint.h"
+#include "stddef.h"
+
+/* AWS Specific header files */
+#include "aws_iot_error.h"
+#include "aws_iot_config.h"
+
+/* Platform specific implementation header files */
+#include "network_interface.h"
+#include "timer_interface.h"
+
+#ifdef _ENABLE_THREAD_SUPPORT_
+#include "threads_interface.h"
+#endif
+
+#define MAX_PACKET_ID 65535
+
+typedef struct _Client AWS_IoT_Client;
+
+/**
+ * @brief Quality of Service Type
+ *
+ * Defining a QoS type.
+ * @note QoS 2 is \b NOT supported by the AWS IoT Service at the time of this SDK release.
+ *
+ */
+typedef enum QoS {
+	QOS0 = 0,
+	QOS1 = 1
+} QoS;
+
+/**
+ * @brief Publish Message Parameters Type
+ *
+ * Defines a type for MQTT Publish messages. Used for both incoming and out going messages
+ *
+ */
+typedef struct {
+	QoS qos;		///< Message Quality of Service
+	uint8_t isRetained;	///< Retained messages are \b NOT supported by the AWS IoT Service at the time of this SDK release.
+	uint8_t isDup;		///< Is this message a duplicate QoS > 0 message?  Handled automatically by the MQTT client.
+	uint16_t id;		///< Message sequence identifier.  Handled automatically by the MQTT client.
+	void *payload;		///< Pointer to MQTT message payload (bytes).
+	size_t payloadLen;	///< Length of MQTT payload.
+} IoT_Publish_Message_Params;
+
+/**
+ * @brief MQTT Version Type
+ *
+ * Defining an MQTT version type. Only 3.1.1 is supported at this time
+ *
+ */
+typedef enum {
+	MQTT_3_1_1 = 4    ///< MQTT 3.1.1 (protocol message byte = 4)
+} MQTT_Ver_t;
+
+/**
+ * @brief Last Will and Testament Definition
+ *
+ * Defining a type for the MQTT "Last Will and Testament" (LWT) parameters.
+ * @note Retained messages are \b NOT supported by the AWS IoT Service at the time of this SDK release.
+ *
+ */
+typedef struct {
+	char struct_id[4];		///< The eyecatcher for this structure.  must be MQTW
+	char *pTopicName;		///< The LWT topic to which the LWT message will be published
+	uint16_t topicNameLen;		///< The length of the LWT topic, 16 bit unsinged integer
+	char *pMessage;			///< Message to be delivered as LWT
+	uint16_t msgLen;		///< The length of the Message, 16 bit unsinged integer
+	bool isRetained;		///< NOT supported. The retained flag for the LWT message (see MQTTAsync_message.retained)
+	QoS qos;			///< QoS of LWT message
+} IoT_MQTT_Will_Options;
+extern const IoT_MQTT_Will_Options iotMqttWillOptionsDefault;
+
+#define IoT_MQTT_Will_Options_Initializer { {'M', 'Q', 'T', 'W'}, NULL, 0, NULL, 0, false, QOS0 }
+
+/**
+ * @brief MQTT Connection Parameters
+ *
+ * Defining a type for MQTT connection parameters.  Passed into client when establishing a connection.
+ *
+ */
+typedef struct {
+	char struct_id[4];			///< The eyecatcher for this structure.  must be MQTC
+	MQTT_Ver_t MQTTVersion;			///< Desired MQTT version used during connection
+	char *pClientID;                	///< Pointer to a string defining the MQTT client ID (this needs to be unique \b per \b device across your AWS account)
+	uint16_t clientIDLen;			///< Client Id Length. 16 bit unsigned integer
+	uint16_t keepAliveIntervalInSec;	///< MQTT keep alive interval in seconds.  Defines inactivity time allowed before determining the connection has been lost.
+	bool isCleanSession;			///< MQTT clean session.  True = this session is to be treated as clean.  Previous server state is cleared and no stated is retained from this connection.
+	bool isWillMsgPresent;			///< Is there a LWT associated with this connection?
+	IoT_MQTT_Will_Options will;		///< MQTT LWT parameters.
+	char *pUsername;			///< Not used in the AWS IoT Service, will need to be cstring if used
+	uint16_t usernameLen;			///< Username Length. 16 bit unsigned integer
+	char *pPassword;			///< Not used in the AWS IoT Service, will need to be cstring if used
+	uint16_t passwordLen;			///< Password Length. 16 bit unsigned integer
+} IoT_Client_Connect_Params;
+extern const IoT_Client_Connect_Params iotClientConnectParamsDefault;
+
+#define IoT_Client_Connect_Params_initializer { {'M', 'Q', 'T', 'C'}, MQTT_3_1_1, NULL, 0, 60, true, false, \
+        IoT_MQTT_Will_Options_Initializer, NULL, 0, NULL, 0 }
+
+/**
+ * @brief Disconnect Callback Handler Type
+ *
+ * Defining a TYPE for definition of disconnect callback function pointers.
+ *
+ */
+typedef void (*iot_disconnect_handler)(AWS_IoT_Client *, void *);
+
+/**
+ * @brief MQTT Initialization Parameters
+ *
+ * Defining a type for MQTT initialization parameters.
+ * Passed into client when to initialize the client
+ *
+ */
+typedef struct {
+	bool enableAutoReconnect;			///< Set to true to enable auto reconnect
+	char *pHostURL;					///< Pointer to a string defining the endpoint for the MQTT service
+	uint16_t port;					///< MQTT service listening port
+	char *pRootCALocation;				///< Pointer to a string defining the Root CA file (full file, not path)
+	char *pDeviceCertLocation;			///< Pointer to a string defining the device identity certificate file (full file, not path)
+	char *pDevicePrivateKeyLocation;        	///< Pointer to a string defining the device private key file (full file, not path)
+	uint32_t mqttPacketTimeout_ms;			///< Timeout for reading a complete MQTT packet. In milliseconds
+	uint32_t mqttCommandTimeout_ms;			///< Timeout for MQTT blocking calls. In milliseconds
+	uint32_t tlsHandshakeTimeout_ms;		///< TLS handshake timeout.  In milliseconds
+	bool isSSLHostnameVerify;			///< Client should perform server certificate hostname validation
+	iot_disconnect_handler disconnectHandler;	///< Callback to be invoked upon connection loss
+	void *disconnectHandlerData;			///< Data to pass as argument when disconnect handler is called
+#ifdef _ENABLE_THREAD_SUPPORT_
+	bool isBlockOnThreadLockEnabled;		///< Timeout for Thread blocking calls. Set to 0 to block until lock is obtained. In milliseconds
+#endif
+} IoT_Client_Init_Params;
+extern const IoT_Client_Init_Params iotClientInitParamsDefault;
+
+#ifdef _ENABLE_THREAD_SUPPORT_
+#define IoT_Client_Init_Params_initializer { true, NULL, 0, NULL, NULL, NULL, 2000, 20000, 5000, true, NULL, NULL, false }
+#else
+#define IoT_Client_Init_Params_initializer { true, NULL, 0, NULL, NULL, NULL, 2000, 20000, 5000, true, NULL, NULL }
+#endif
+
+/**
+ * @brief MQTT Client State Type
+ *
+ * Defining a type for MQTT Client State
+ *
+ */
+typedef enum _ClientState {
+	CLIENT_STATE_INVALID = 0,
+	CLIENT_STATE_INITIALIZED = 1,
+	CLIENT_STATE_CONNECTING = 2,
+	CLIENT_STATE_CONNECTED_IDLE = 3,
+	CLIENT_STATE_CONNECTED_YIELD_IN_PROGRESS = 4,
+	CLIENT_STATE_CONNECTED_PUBLISH_IN_PROGRESS = 5,
+	CLIENT_STATE_CONNECTED_SUBSCRIBE_IN_PROGRESS = 6,
+	CLIENT_STATE_CONNECTED_UNSUBSCRIBE_IN_PROGRESS = 7,
+	CLIENT_STATE_CONNECTED_RESUBSCRIBE_IN_PROGRESS = 8,
+	CLIENT_STATE_CONNECTED_WAIT_FOR_CB_RETURN = 9,
+	CLIENT_STATE_DISCONNECTING = 10,
+	CLIENT_STATE_DISCONNECTED_ERROR = 11,
+	CLIENT_STATE_DISCONNECTED_MANUALLY = 12,
+	CLIENT_STATE_PENDING_RECONNECT = 13
+} ClientState;
+
+/**
+ * @brief Application Callback Handler Type
+ *
+ * Defining a TYPE for definition of application callback function pointers.
+ * Used to send incoming data to the application
+ *
+ */
+typedef void (*pApplicationHandler_t)(AWS_IoT_Client *pClient, char *pTopicName, uint16_t topicNameLen,
+									  IoT_Publish_Message_Params *pParams, void *pClientData);
+
+/**
+ * @brief MQTT Message Handler
+ *
+ * Defining a type for MQTT Message Handlers.
+ * Used to pass incoming data back to the application
+ *
+ */
+typedef struct _MessageHandlers {
+	const char *topicName;
+	uint16_t topicNameLen;
+	QoS qos;
+	pApplicationHandler_t pApplicationHandler;
+	void *pApplicationHandlerData;
+} MessageHandlers;   /* Message handlers are indexed by subscription topic */
+
+/**
+ * @brief MQTT Client Status
+ *
+ * Defining a type for MQTT Client Status
+ * Contains information about the state of the MQTT Client
+ *
+ */
+typedef struct _ClientStatus {
+	ClientState clientState;
+	bool isPingOutstanding;
+	bool isAutoReconnectEnabled;
+} ClientStatus;
+
+/**
+ * @brief MQTT Client Data
+ *
+ * Defining a type for MQTT Client Data
+ * Contains data used by the MQTT Client
+ *
+ */
+typedef struct _ClientData {
+	uint16_t nextPacketId;
+
+	uint32_t packetTimeoutMs;
+	uint32_t commandTimeoutMs;
+	uint16_t keepAliveInterval;
+	uint32_t currentReconnectWaitInterval;
+	uint32_t counterNetworkDisconnected;
+
+	/* The below values are initialized with the
+	 * lengths of the TX/RX buffers and never modified
+	 * afterwards */
+	size_t writeBufSize;
+	size_t readBufSize;
+
+	unsigned char writeBuf[AWS_IOT_MQTT_TX_BUF_LEN];
+	unsigned char readBuf[AWS_IOT_MQTT_RX_BUF_LEN];
+
+#ifdef _ENABLE_THREAD_SUPPORT_
+	bool isBlockOnThreadLockEnabled;
+	IoT_Mutex_t state_change_mutex;
+	IoT_Mutex_t tls_read_mutex;
+	IoT_Mutex_t tls_write_mutex;
+#endif
+
+	IoT_Client_Connect_Params options;
+
+	MessageHandlers messageHandlers[AWS_IOT_MQTT_NUM_SUBSCRIBE_HANDLERS];
+	iot_disconnect_handler disconnectHandler;
+
+	void *disconnectHandlerData;
+} ClientData;
+
+/**
+ * @brief MQTT Client
+ *
+ * Defining a type for MQTT Client
+ *
+ */
+struct _Client {
+	TimerAWS pingTimer;
+	TimerAWS reconnectDelayTimer;
+
+	ClientStatus clientStatus;
+	ClientData clientData;
+	Network networkStack;
+};
+
+/**
+ * @brief What is the next available packet Id
+ *
+ * Called to retrieve the next packet id to be used for outgoing packets.
+ * Automatically increments the last sent packet id variable
+ *
+ * @param pClient Reference to the IoT Client
+ *
+ * @return next packet id as a 16 bit unsigned integer
+ */
+uint16_t aws_iot_mqtt_get_next_packet_id(AWS_IoT_Client *pClient);
+
+/**
+ * @brief Set the connection parameters for the IoT Client
+ *
+ * Called to set the connection parameters for the IoT Client.
+ * Used to update the connection parameters provided before the last connect.
+ * Won't take effect until the next time connect is called
+ *
+ * @param pClient Reference to the IoT Client
+ * @param pNewConnectParams Reference to the new Connection Parameters structure
+ *
+ * @return IoT_Error_t Type defining successful/failed API call
+ */
+IoT_Error_t aws_iot_mqtt_set_connect_params(AWS_IoT_Client *pClient, IoT_Client_Connect_Params *pNewConnectParams);
+
+/**
+ * @brief Is the MQTT client currently connected?
+ *
+ * Called to determine if the MQTT client is currently connected.  Used to support logic
+ * in the device application around reconnecting and managing offline state.
+ *
+ * @param pClient Reference to the IoT Client
+ *
+ * @return true = connected, false = not currently connected
+ */
+bool aws_iot_mqtt_is_client_connected(AWS_IoT_Client *pClient);
+
+/**
+ * @brief Get the current state of the client
+ *
+ * Called to get the current state of the client
+ *
+ * @param pClient Reference to the IoT Client
+ *
+ * @return ClientState value equal to the current state of the client
+ */
+ClientState aws_iot_mqtt_get_client_state(AWS_IoT_Client *pClient);
+
+/**
+ * @brief Is the MQTT client set to reconnect automatically?
+ *
+ * Called to determine if the MQTT client is set to reconnect automatically.
+ * Used to support logic in the device application around reconnecting
+ *
+ * @param pClient Reference to the IoT Client
+ *
+ * @return true = enabled, false = disabled
+ */
+bool aws_iot_is_autoreconnect_enabled(AWS_IoT_Client *pClient);
+
+/**
+ * @brief Set the IoT Client disconnect handler
+ *
+ * Called to set the IoT Client disconnect handler
+ * The disconnect handler is called whenever the client disconnects with error
+ *
+ * @param pClient Reference to the IoT Client
+ * @param pConnectHandler Reference to the new Disconnect Handler
+ * @param pDisconnectHandlerData Reference to the data to be passed as argument when disconnect handler is called
+ *
+ * @return IoT_Error_t Type defining successful/failed API call
+ */
+IoT_Error_t aws_iot_mqtt_set_disconnect_handler(AWS_IoT_Client *pClient, iot_disconnect_handler pDisconnectHandler,
+												void *pDisconnectHandlerData);
+
+/**
+ * @brief Enable or Disable AutoReconnect on Network Disconnect
+ *
+ * Called to enable or disabled the auto reconnect features provided with the SDK
+ *
+ * @param pClient Reference to the IoT Client
+ * @param newStatus set to true for enabling and false for disabling
+ *
+ * @return IoT_Error_t Type defining successful/failed API call
+ */
+IoT_Error_t aws_iot_mqtt_autoreconnect_set_status(AWS_IoT_Client *pClient, bool newStatus);
+
+/**
+ * @brief Get count of Network Disconnects
+ *
+ * Called to get the number of times a network disconnect occurred due to errors
+ *
+ * @param pClient Reference to the IoT Client
+ *
+ * @return uint32_t the disconnect count
+ */
+uint32_t aws_iot_mqtt_get_network_disconnected_count(AWS_IoT_Client *pClient);
+
+/**
+ * @brief Reset Network Disconnect conter
+ *
+ * Called to reset the Network Disconnect counter to zero
+ *
+ * @param pClient Reference to the IoT Client
+ */
+void aws_iot_mqtt_reset_network_disconnected_count(AWS_IoT_Client *pClient);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif