File content as of revision 22:080d9bf2f5c0:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "mbed.h"
#include "BLEDevice.h"

BLEDevice  ble;                /* BLE radio driver */

DigitalOut mainloopLED(LED1);
DigitalOut tickerLED(LED2);
Ticker     flipper;
Serial     pc(USBTX,USBRX);

/*
 * For this demo application, populate the beacon advertisement payload
 * with 2 AD structures: FLAG and MSD (manufacturer specific data).
 *
 * Reference:
 *  Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 11, 18
 */

/*
 * The Beacon payload (encapsulated within the MSD advertising data structure)
 * has the following composition:
 * 128-Bit UUID = E2 0A 39 F4 73 F5 4B C4 A1 2F 17 D1 AD 07 A9 61
 * Major/Minor  = 0000 / 0000
 * Tx Power     = C8
 */
const static uint8_t beaconPayload[] = {
    0x4C, 0x00, // Company identifier code (0x004C == Apple)
    0x02,       // ID
    0x15,       // length of the remaining payload
    0xE2, 0x0A, 0x39, 0xF4, 0x73, 0xF5, 0x4B, 0xC4, // UUID
    0xA1, 0x2F, 0x17, 0xD1, 0xAD, 0x07, 0xA9, 0x61,
    0x00, 0x00, // the major value to differenciate a location
    0x00, 0x00, // the minor value to differenciate a location
    0xC8        // 2's complement of the Tx power (-56dB)
};

static void setupAppHardware(void);
static void tickerCallback(void);

int main(void)
{
    setupAppHardware();

    pc.printf("Initialising BTLE transport\n\r");
    ble.init();
    ble.reset();

    /* Setup advertising data. This includes AD structures in the payload of
     * advertising packets. */
    {
        GapAdvertisingData advData;
        advData.addFlags(GapAdvertisingData::BREDR_NOT_SUPPORTED);
        advData.addData(GapAdvertisingData::MANUFACTURER_SPECIFIC_DATA,
                        beaconPayload,
                        sizeof(beaconPayload));
        ble.setAdvertisingData(advData);
    }

    ble.setAdvertisingType(GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED);
    ble.startAdvertising();

    /* Do blinky on mainloopLED while we're waiting for BLE events */
    for (;;) {
        mainloopLED = !mainloopLED;
        wait(1);
    }
}

void setupAppHardware(void)
{
    /* Setup blinkies: mainloopLED is toggled in main, tickerLED is
     * toggled via Ticker */
    mainloopLED = 1;
    tickerLED   = 1;
    flipper.attach(&tickerCallback, 1.0);
}

void tickerCallback(void)
{
    tickerLED = !tickerLED;
}