hadrovic oled

Dependencies:   mbed

Revision:
0:b13343630d26
diff -r 000000000000 -r b13343630d26 EAOLED/EAOLED.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/EAOLED/EAOLED.cpp	Wed Apr 09 13:32:39 2014 +0000
@@ -0,0 +1,121 @@
+/* mbed Embedded Artists OLED library, as found on the LPCXpresso Baseboard
+ * Copyright (c) 2010, sford
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "EAOLED.h"
+#include "mbed.h"
+
+EAOLED::EAOLED(PinName mosi, PinName dnc, PinName sclk, PinName cs, PinName power) 
+    : _spi(mosi, NC, sclk), _data(dnc), _cs(cs), _power(power) {
+    reset();    
+}
+      
+void EAOLED::command(int value) {
+    _data = 0;
+    _cs = 0;
+    _spi.write(value);
+    _cs = 1;
+}
+
+void EAOLED::data(int value) {
+    _data = 1;
+    _cs = 0;
+    _spi.write(value);
+    _cs = 1;
+}
+
+void EAOLED::reset() {
+    _power = 0;
+    _cs = 1;
+
+    // Startup sequence recommended by embedded artists baseboard reference code
+    command(0x02); // set low column address
+    command(0x12); // set high column address
+    command(0x40); // display start set
+    command(0x2e); // stop horzontal scroll
+    command(0x81); // set contrast control register
+    command(0x32); //
+    command(0x82); // brightness for color banks
+    command(0x80); // display on
+    command(0xa1); // set segment re-map
+    command(0xa6); // set normal/inverse display
+    command(0xa8); // set multiplex ratio
+    command(0x3F); //
+    command(0xd3); // set display offset
+    command(0x40); //
+    command(0xad); // set dc-dc on/off
+    command(0x8E); //
+    command(0xc8); // set com output scan direction
+    command(0xd5); // set display clock divide ratio/oscillator/frequency
+    command(0xf0); //
+    command(0xd8); // set area color mode on/off & low power display mode 
+    command(0x05); //
+    command(0xd9); // set pre-charge period
+    command(0xF1); //
+    command(0xda); // set com pins hardware configuration
+    command(0x12); //
+    command(0xdb); // set vcom deselect level
+    command(0x34); //
+    command(0x91); // set look up table for area color 
+    command(0x3f); //
+    command(0x3f); //
+    command(0x3f); //
+    command(0x3f); //
+    command(0xaf); // display on
+    command(0xa4); // display on
+
+    wait_us(10);
+
+    _power = 1;
+}
+
+#define OLED_DISPLAY_WIDTH  96
+#define OLED_DISPLAY_HEIGHT 64
+
+void EAOLED::pixel(int x, int y, int colour) {
+    int page = y >> 3;
+    int address = 18 + x;
+    
+    int lo = (address >> 0) & 0x0F;
+    int hi =  (address >> 4) | 0x10;
+    int mask = 1 << (y & 0x7);
+    int byte = page * OLED_DISPLAY_WIDTH + x;
+    
+    if(colour) {
+        framebuffer[byte] |= mask;
+    } else {
+        framebuffer[byte] &= ~mask;
+    }
+
+    command(0xB0 + page);
+    command(lo);
+    command(hi);
+    data(framebuffer[byte]);
+}
+
+/*void EAOLED::cls() {
+    for(int y=0; y<64; y++) {
+        for (int x=0; x<96; x++) {
+            pixel(x, y, 0xFFFFFF);
+        }
+    }
+}*/
+