Diff: ADC_full/adc.h

Revision:

0:b13343630d26

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ADC_full/adc.h	Wed Apr 09 13:32:39 2014 +0000
@@ -0,0 +1,131 @@
+/* mbed Library - ADC
+ * Copyright (c) 2010, sblandford
+ * released under MIT license http://mbed.org/licence/mit
+ */
+
+#ifndef MBED_ADC_H
+#define MBED_ADC_H
+ 
+#include "mbed.h"
+#define XTAL_FREQ       12000000
+#define MAX_ADC_CLOCK   13000000
+#define CLKS_PER_SAMPLE 64
+
+class ADC {
+public:
+
+    //Initialize ADC with ADC maximum sample rate of
+    //sample_rate and system clock divider of cclk_div
+    //Maximum recommened sample rate is 184000
+    ADC(int sample_rate, int cclk_div);
+
+    //Enable/disable ADC on pin according to state
+    //and also select/de-select for next conversion
+    void setup(PinName pin, int state);
+
+    //Return enabled/disabled state of ADC on pin
+    int setup(PinName pin);
+
+    //Enable/disable burst mode according to state
+    void burst(int state);
+
+    //Select channel already setup
+    void select(PinName pin);
+
+    //Return burst mode enabled/disabled
+    int burst(void);
+
+    /*Set start condition and edge according to mode:
+    0 - No start (this value should be used when clearing PDN to 0).
+    1 - Start conversion now.
+    2 - Start conversion when the edge selected by bit 27 occurs on the P2.10 / EINT0 / NMI pin.
+    3 - Start conversion when the edge selected by bit 27 occurs on the P1.27 / CLKOUT /
+        USB_OVRCRn / CAP0.1 pin.
+    4 - Start conversion when the edge selected by bit 27 occurs on MAT0.1. Note that this does
+        not require that the MAT0.1 function appear on a device pin.
+    5 - Start conversion when the edge selected by bit 27 occurs on MAT0.3. Note that it is not
+        possible to cause the MAT0.3 function to appear on a device pin.
+    6 - Start conversion when the edge selected by bit 27 occurs on MAT1.0. Note that this does
+        not require that the MAT1.0 function appear on a device pin.
+    7 - Start conversion when the edge selected by bit 27 occurs on MAT1.1. Note that this does
+        not require that the MAT1.1 function appear on a device pin.
+    When mode >= 2, conversion is triggered by edge:
+    0 - Rising edge
+    1 - Falling edge
+    */
+    void startmode(int mode, int edge);
+    
+    //Return startmode state according to mode_edge=0: mode and mode_edge=1: edge
+    int startmode(int mode_edge);
+    
+    //Start ADC conversion
+    void start(void);
+
+    //Set interrupt enable/disable for pin to state
+    void interrupt_state(PinName pin, int state);
+    
+    //Return enable/disable state of interrupt for pin
+    int interrupt_state(PinName pin);
+
+    //Attach custom interrupt handler replacing default
+    void attach(void(*fptr)(void));
+
+    //Restore default interrupt handler
+    void detach(void);
+
+    //Append custom interrupt handler for pin
+    void append(PinName pin, void(*fptr)(uint32_t value));
+
+    //Unappend custom interrupt handler for pin
+    void unappend(PinName pin);
+
+    //Append custom global interrupt handler
+    void append(void(*fptr)(int chan, uint32_t value));
+
+    //Unappend custom global interrupt handler
+    void unappend(void);
+
+    //Set ADC offset to a value 0-7
+    void offset(int offset);
+    
+    //Return current ADC offset
+    int offset(void);
+
+    //Return value of ADC on pin
+    int read(PinName pin);
+
+    //Return DONE flag of ADC on pin
+    int done(PinName pin);
+    
+    //Return OVERRUN flag of ADC on pin
+    int overrun(PinName pin);
+
+    //Return actual ADC clock
+    int actual_adc_clock(void);
+    
+    //Return actual maximum sample rate
+    int actual_sample_rate(void);
+
+    //Return pin ID of ADC channel
+    PinName channel_to_pin(int chan);
+
+    //Return pin number of ADC channel
+    int channel_to_pin_number(int chan);
+
+
+private:
+    int _pin_to_channel(PinName pin);
+    uint32_t _data_of_pin(PinName pin);
+
+    int _adc_clk_freq;
+    void adcisr(void);
+    static void _adcisr(void);
+    static ADC *instance;
+    
+    uint32_t _adc_data[8];
+    void(*_adc_isr[8])(uint32_t value);
+    void(*_adc_g_isr)(int chan, uint32_t value);
+    void(*_adc_m_isr)(void);
+};
+
+#endif
\ No newline at end of file