mbed library sources

Fork of mbed-src by mbed official

Revision:
554:edd95c0879f8
diff -r 063b9f2f393c -r edd95c0879f8 targets/hal/TARGET_NXP/TARGET_LPC2460/PinNames.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC2460/PinNames.h	Mon Jun 01 11:00:11 2015 +0100
@@ -0,0 +1,112 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  5
+
+typedef enum {
+    // LPC Pin Names
+    P0_0 = LPC_GPIO0_BASE,
+          P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
+    P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
+    P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31,
+    P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31,
+    P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31,
+
+    // mbed DIP Pin Names
+    p5 = P0_18,
+    p6 = P0_17,
+    p7 = P0_15,
+    p8 = P0_16,
+
+    p9 = P0_2,
+    p10 = P0_3,
+    p11 = P0_18,
+    p12 = P0_17,
+    p13 = P2_0,
+    p14 = P2_1,
+    p15 = P4_28,
+    p16 = P4_29,
+    p17 = P2_30,
+    p18 = P2_31,
+    p19 = P0_0,
+    p20 = P0_1,
+    p21 = P0_26,
+    p22 = P0_12,
+    p23 = P0_13,
+    p24 = P1_20,
+    p25 = P1_21,
+    p26 = P1_23,
+    p27 = P1_24,
+    p28 = P0_29,
+    p29 = P0_30,
+    p30 = P1_2,
+    p31 = P1_3,
+    p32 = P1_6,
+    p33 = P1_7,
+    p34 = P1_11,
+    p35 = P1_12,
+
+    // Other mbed Pin Names
+    LED1 = P1_19,
+    LED2 = P2_26,
+    LED3 = P2_27,
+    LED4 = P2_27,
+
+    USBTX = P2_8,
+    USBRX = P2_9,
+
+    EXT_WDT = P0_10,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+    PullUp = 0,
+    PullDown = 3,
+    PullNone = 2,
+    OpenDrain = 4,
+    PullDefault = PullDown
+} PinMode;
+
+// version of PINCON_TypeDef using register arrays
+typedef struct {
+  __IO uint32_t PINSEL[11];
+       uint32_t RESERVED0[5];
+  __IO uint32_t PINMODE[10];
+} PINCONARRAY_TypeDef;
+
+#define PINCONARRAY ((PINCONARRAY_TypeDef *)LPC_PINCON_BASE)
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif