Kevin Barnett / SX1276GenericLib

Fork with intent to refactor and add support for American 902-928(915) Frequency Bands

sx1276/sx1276-hal.h@2:5eb3066446dd, 2014-08-19 (annotated)

Committer:
GregCr
Date:
Tue Aug 19 08:50:09 2014 +0000
Revision:
2:5eb3066446dd
Parent:
1:f979673946c0
Child:
4:f0ce52e94d3f
Corrections linked to the board detection and handling

Who changed what in which revision?

UserRevisionLine numberNew contents of line
GregCr 0:e6ceb13d2d05 1 /*
GregCr 0:e6ceb13d2d05 2 / _____) _ | |
GregCr 0:e6ceb13d2d05 3 ( (____ _____ ____ _| |_ _____ ____| |__
GregCr 0:e6ceb13d2d05 4 \____ \| ___ | (_ _) ___ |/ ___) _ \
GregCr 0:e6ceb13d2d05 5 _____) ) ____| | | || |_| ____( (___| | | |
GregCr 0:e6ceb13d2d05 6 (______/|_____)_|_|_| \__)_____)\____)_| |_|
GregCr 0:e6ceb13d2d05 7 ( C )2014 Semtech
GregCr 0:e6ceb13d2d05 8
GregCr 0:e6ceb13d2d05 9 Description: -
GregCr 0:e6ceb13d2d05 10
GregCr 0:e6ceb13d2d05 11 License: Revised BSD License, see LICENSE.TXT file include in the project
GregCr 0:e6ceb13d2d05 12
GregCr 0:e6ceb13d2d05 13 Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin
GregCr 0:e6ceb13d2d05 14 */
GregCr 0:e6ceb13d2d05 15 #ifndef __SX1276_HAL_H__
GregCr 0:e6ceb13d2d05 16 #define __SX1276_HAL_H__
GregCr 0:e6ceb13d2d05 17 #include "sx1276.h"
GregCr 0:e6ceb13d2d05 18 #include "debug.h"
GregCr 0:e6ceb13d2d05 19
GregCr 0:e6ceb13d2d05 20 /*!
GregCr 0:e6ceb13d2d05 21 * Actual implementation of a SX1276 radio, includes some modifications to make it compatible with the MB1 LAS board
GregCr 0:e6ceb13d2d05 22 */
GregCr 0:e6ceb13d2d05 23 class SX1276MB1xAS : public SX1276
GregCr 0:e6ceb13d2d05 24 {
GregCr 0:e6ceb13d2d05 25 protected:
GregCr 0:e6ceb13d2d05 26 /*!
GregCr 0:e6ceb13d2d05 27 * Antenna switch GPIO pins objects
GregCr 0:e6ceb13d2d05 28 */
GregCr 1:f979673946c0 29 DigitalInOut antSwitch;
GregCr 0:e6ceb13d2d05 30
GregCr 0:e6ceb13d2d05 31 DigitalIn fake;
GregCr 0:e6ceb13d2d05 32
GregCr 0:e6ceb13d2d05 33 private:
GregCr 0:e6ceb13d2d05 34 static const RadioRegisters_t RadioRegsInit[];
GregCr 0:e6ceb13d2d05 35
GregCr 0:e6ceb13d2d05 36 public:
GregCr 0:e6ceb13d2d05 37 SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int8_t rssi, int8_t snr ), void ( *rxTimeout ) ( ), void ( *rxError ) ( ),
GregCr 0:e6ceb13d2d05 38 PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
GregCr 0:e6ceb13d2d05 39 PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5,
GregCr 0:e6ceb13d2d05 40 PinName antSwitch );
GregCr 0:e6ceb13d2d05 41 SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int8_t rssi, int8_t snr ), void ( *rxTimeout ) ( ), void ( *rxError ) ( ) );
GregCr 0:e6ceb13d2d05 42 virtual ~SX1276MB1xAS( ) { };
GregCr 0:e6ceb13d2d05 43
GregCr 0:e6ceb13d2d05 44 protected:
GregCr 2:5eb3066446dd 45
GregCr 0:e6ceb13d2d05 46 /*!
GregCr 0:e6ceb13d2d05 47 * @brief Initializes the radio I/Os pins interface
GregCr 0:e6ceb13d2d05 48 */
GregCr 0:e6ceb13d2d05 49 virtual void IoInit( void );
GregCr 0:e6ceb13d2d05 50
GregCr 0:e6ceb13d2d05 51 /*!
GregCr 0:e6ceb13d2d05 52 * @brief Initializes the radio registers
GregCr 0:e6ceb13d2d05 53 */
GregCr 0:e6ceb13d2d05 54 virtual void RadioRegistersInit( );
GregCr 0:e6ceb13d2d05 55
GregCr 0:e6ceb13d2d05 56 /*!
GregCr 0:e6ceb13d2d05 57 * @brief Initializes the radio SPI
GregCr 0:e6ceb13d2d05 58 */
GregCr 0:e6ceb13d2d05 59 virtual void SpiInit( void );
GregCr 0:e6ceb13d2d05 60
GregCr 0:e6ceb13d2d05 61 /*!
GregCr 0:e6ceb13d2d05 62 * @brief Initializes DIO IRQ handlers
GregCr 0:e6ceb13d2d05 63 *
GregCr 0:e6ceb13d2d05 64 * @param [IN] irqHandlers Array containing the IRQ callback functions
GregCr 0:e6ceb13d2d05 65 */
GregCr 0:e6ceb13d2d05 66 virtual void IoIrqInit( DioIrqHandler *irqHandlers );
GregCr 0:e6ceb13d2d05 67
GregCr 0:e6ceb13d2d05 68 /*!
GregCr 0:e6ceb13d2d05 69 * @brief De-initializes the radio I/Os pins interface.
GregCr 0:e6ceb13d2d05 70 *
GregCr 0:e6ceb13d2d05 71 * \remark Useful when going in MCU lowpower modes
GregCr 0:e6ceb13d2d05 72 */
GregCr 0:e6ceb13d2d05 73 virtual void IoDeInit( void );
GregCr 0:e6ceb13d2d05 74
GregCr 0:e6ceb13d2d05 75 /*!
GregCr 0:e6ceb13d2d05 76 * @brief Gets the board PA selection configuration
GregCr 0:e6ceb13d2d05 77 *
GregCr 0:e6ceb13d2d05 78 * @param [IN] channel Channel frequency in Hz
GregCr 0:e6ceb13d2d05 79 * @retval PaSelect RegPaConfig PaSelect value
GregCr 0:e6ceb13d2d05 80 */
GregCr 0:e6ceb13d2d05 81 virtual uint8_t GetPaSelect( uint32_t channel );
GregCr 0:e6ceb13d2d05 82
GregCr 0:e6ceb13d2d05 83 /*!
GregCr 0:e6ceb13d2d05 84 * @brief Set the RF Switch I/Os pins in Low Power mode
GregCr 0:e6ceb13d2d05 85 *
GregCr 0:e6ceb13d2d05 86 * @param [IN] status enable or disable
GregCr 0:e6ceb13d2d05 87 */
GregCr 0:e6ceb13d2d05 88 virtual void SetAntSwLowPower( bool status );
GregCr 0:e6ceb13d2d05 89
GregCr 0:e6ceb13d2d05 90 /*!
GregCr 0:e6ceb13d2d05 91 * @brief Initializes the RF Switch I/Os pins interface
GregCr 0:e6ceb13d2d05 92 */
GregCr 0:e6ceb13d2d05 93 virtual void AntSwInit( void );
GregCr 0:e6ceb13d2d05 94
GregCr 0:e6ceb13d2d05 95 /*!
GregCr 0:e6ceb13d2d05 96 * @brief De-initializes the RF Switch I/Os pins interface
GregCr 0:e6ceb13d2d05 97 *
GregCr 0:e6ceb13d2d05 98 * \remark Needed to decrease the power consumption in MCU lowpower modes
GregCr 0:e6ceb13d2d05 99 */
GregCr 0:e6ceb13d2d05 100 virtual void AntSwDeInit( void );
GregCr 0:e6ceb13d2d05 101
GregCr 0:e6ceb13d2d05 102 /*!
GregCr 0:e6ceb13d2d05 103 * @brief Controls the antena switch if necessary.
GregCr 0:e6ceb13d2d05 104 *
GregCr 0:e6ceb13d2d05 105 * \remark see errata note
GregCr 0:e6ceb13d2d05 106 *
GregCr 0:e6ceb13d2d05 107 * @param [IN] rxTx [1: Tx, 0: Rx]
GregCr 0:e6ceb13d2d05 108 */
GregCr 0:e6ceb13d2d05 109 virtual void SetAntSw( uint8_t rxTx );
GregCr 0:e6ceb13d2d05 110
GregCr 0:e6ceb13d2d05 111 public:
GregCr 0:e6ceb13d2d05 112 /*!
GregCr 2:5eb3066446dd 113 * @brief Detect the board connected by reading the value of the antenna switch pin
GregCr 2:5eb3066446dd 114 */
GregCr 2:5eb3066446dd 115 virtual uint8_t DetectBoardType( void );
GregCr 2:5eb3066446dd 116
GregCr 2:5eb3066446dd 117 /*!
GregCr 0:e6ceb13d2d05 118 * @brief Checks if the given RF frequency is supported by the hardware
GregCr 0:e6ceb13d2d05 119 *
GregCr 0:e6ceb13d2d05 120 * @param [IN] frequency RF frequency to be checked
GregCr 0:e6ceb13d2d05 121 * @retval isSupported [true: supported, false: unsupported]
GregCr 0:e6ceb13d2d05 122 */
GregCr 0:e6ceb13d2d05 123 virtual bool CheckRfFrequency( uint32_t frequency );
GregCr 0:e6ceb13d2d05 124
GregCr 0:e6ceb13d2d05 125 /*!
GregCr 0:e6ceb13d2d05 126 * @brief Writes the radio register at the specified address
GregCr 0:e6ceb13d2d05 127 *
GregCr 0:e6ceb13d2d05 128 * @param [IN]: addr Register address
GregCr 0:e6ceb13d2d05 129 * @param [IN]: data New register value
GregCr 0:e6ceb13d2d05 130 */
GregCr 0:e6ceb13d2d05 131 virtual void Write ( uint8_t addr, uint8_t data ) ;
GregCr 0:e6ceb13d2d05 132
GregCr 0:e6ceb13d2d05 133 /*!
GregCr 0:e6ceb13d2d05 134 * @brief Reads the radio register at the specified address
GregCr 0:e6ceb13d2d05 135 *
GregCr 0:e6ceb13d2d05 136 * @param [IN]: addr Register address
GregCr 0:e6ceb13d2d05 137 * @retval data Register value
GregCr 0:e6ceb13d2d05 138 */
GregCr 0:e6ceb13d2d05 139 virtual uint8_t Read ( uint8_t addr ) ;
GregCr 0:e6ceb13d2d05 140
GregCr 0:e6ceb13d2d05 141 /*!
GregCr 0:e6ceb13d2d05 142 * @brief Writes multiple radio registers starting at address
GregCr 0:e6ceb13d2d05 143 *
GregCr 0:e6ceb13d2d05 144 * @param [IN] addr First Radio register address
GregCr 0:e6ceb13d2d05 145 * @param [IN] buffer Buffer containing the new register's values
GregCr 0:e6ceb13d2d05 146 * @param [IN] size Number of registers to be written
GregCr 0:e6ceb13d2d05 147 */
GregCr 0:e6ceb13d2d05 148 virtual void Write( uint8_t addr, uint8_t *buffer, uint8_t size ) ;
GregCr 0:e6ceb13d2d05 149
GregCr 0:e6ceb13d2d05 150 /*!
GregCr 0:e6ceb13d2d05 151 * @brief Reads multiple radio registers starting at address
GregCr 0:e6ceb13d2d05 152 *
GregCr 0:e6ceb13d2d05 153 * @param [IN] addr First Radio register address
GregCr 0:e6ceb13d2d05 154 * @param [OUT] buffer Buffer where to copy the registers data
GregCr 0:e6ceb13d2d05 155 * @param [IN] size Number of registers to be read
GregCr 0:e6ceb13d2d05 156 */
GregCr 0:e6ceb13d2d05 157 virtual void Read ( uint8_t addr, uint8_t *buffer, uint8_t size ) ;
GregCr 0:e6ceb13d2d05 158
GregCr 0:e6ceb13d2d05 159 /*!
GregCr 0:e6ceb13d2d05 160 * @brief Writes the buffer contents to the SX1276 FIFO
GregCr 0:e6ceb13d2d05 161 *
GregCr 0:e6ceb13d2d05 162 * @param [IN] buffer Buffer containing data to be put on the FIFO.
GregCr 0:e6ceb13d2d05 163 * @param [IN] size Number of bytes to be written to the FIFO
GregCr 0:e6ceb13d2d05 164 */
GregCr 0:e6ceb13d2d05 165 virtual void WriteFifo( uint8_t *buffer, uint8_t size ) ;
GregCr 0:e6ceb13d2d05 166
GregCr 0:e6ceb13d2d05 167 /*!
GregCr 0:e6ceb13d2d05 168 * @brief Reads the contents of the SX1276 FIFO
GregCr 0:e6ceb13d2d05 169 *
GregCr 0:e6ceb13d2d05 170 * @param [OUT] buffer Buffer where to copy the FIFO read data.
GregCr 0:e6ceb13d2d05 171 * @param [IN] size Number of bytes to be read from the FIFO
GregCr 0:e6ceb13d2d05 172 */
GregCr 0:e6ceb13d2d05 173 virtual void ReadFifo( uint8_t *buffer, uint8_t size ) ;
GregCr 0:e6ceb13d2d05 174
GregCr 0:e6ceb13d2d05 175 /*!
GregCr 0:e6ceb13d2d05 176 * @brief Reset the SX1276
GregCr 0:e6ceb13d2d05 177 */
GregCr 0:e6ceb13d2d05 178 virtual void Reset( void );
GregCr 0:e6ceb13d2d05 179 };
GregCr 0:e6ceb13d2d05 180
GregCr 0:e6ceb13d2d05 181 #endif // __SX1276_HAL_H__