Pablo Henrique
code for read VL53l0x sensor with CAN
mbed_config.h
- Committer:
- pablo_bmxrp
- Date:
- 2019-03-18
- Revision:
- 1:7bbfe329c62b
- Parent:
- STM32F103C8T6_MPA/mbed_config.h@ 0:44429c0a71d4
File content as of revision 1:7bbfe329c62b:
/*
* mbed SDK
* Copyright (c) 2017 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
// Automatically generated configuration file.
// DO NOT EDIT, content will be overwritten.
#ifndef __MBED_CONFIG_DATA__
#define __MBED_CONFIG_DATA__
// Configuration parameters
#define CLOCK_SOURCE USE_PLL_HSE_EXTC|USE_PLL_HSI // set by target:NUCLEO_F103RB
#define CLOCK_SOURCE_USB 0 // set by target:NUCLEO_F103RB
#define LPTICKER_DELAY_TICKS 1 // set by target:FAMILY_STM32
#define MBED_CONF_PLATFORM_CRASH_CAPTURE_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_CTHUNK_COUNT_MAX 8 // set by library:platform
#define MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE 9600 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_ALL_THREADS_INFO 0 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_DECODE_HTTP_URL_STR "\nFor more info, visit: https://armmbed.github.io/mbedos-error/?error=0x%08X" // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_FILENAME_CAPTURE_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_HIST_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_HIST_SIZE 4 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_REBOOT_MAX 1 // set by library:platform
#define MBED_CONF_PLATFORM_FATAL_ERROR_AUTO_REBOOT_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_FORCE_NON_COPYABLE_ERROR 0 // set by library:platform
#define MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN 16 // set by library:platform
#define MBED_CONF_PLATFORM_POLL_USE_LOWPOWER_TIMER 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_BAUD_RATE 9600 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_BUFFERED_SERIAL 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_CONVERT_NEWLINES 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_CONVERT_TTY_NEWLINES 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_FLUSH_AT_EXIT 1 // set by library:platform
#define MBED_CONF_PLATFORM_USE_MPU 1 // set by library:platform
#define MBED_CONF_TARGET_BOOT_STACK_SIZE 0x1000 // set by target:Target
#define MBED_CONF_TARGET_DEEP_SLEEP_LATENCY 3 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_LPTICKER_LPTIM_CLOCK 1 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_LPUART_CLOCK_SOURCE USE_LPUART_CLK_LSE|USE_LPUART_CLK_PCLK1 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_LSE_AVAILABLE 1 // set by target:FAMILY_STM32
#define MBED_CONF_TARGET_MPU_ROM_END 0x0fffffff // set by target:Target
#endif