File content as of revision 18:af657c4c3944:

/* YPR (100Hz) */

#include "Task1.h"
#include "setup.h"

/* MPU6050 control/status variables: */
uint8_t mpuIntStatus;       // holds actual interrupt status byte from MPU
uint16_t fifoCount;         // count of all bytes currently in FIFO
uint8_t fifoBuffer[128];     // FIFO storage buffer

/* Orientation/motion variables: */
Quaternion q;               // [w, x, y, z] quaternion container
VectorFloat gravity;        // [x, y, z] gravity vector
float ypr[3];               // [yaw, pitch, roll] yaw/pitch/roll container and gravity vector
volatile float ypr_use[3];

#ifdef ENABLE_COMPASS
//int compassX, compassY, compassZ;
double heading = 0;
#endif

float altitude, temperature;

int counterTask1 = 0;

#ifndef M_PI
#define M_PI 3.1415
#endif

// ================================================================
// === YPR ROUTINE ===
// ================================================================
void Task1(void const *argument)
{
    // reset interrupt flag and get INT_STATUS byte
    mpuIntStatus = imu.getIntStatus();

    // get current FIFO count
    fifoCount = imu.getFIFOCount();
    //imu.debugSerial.printf("FIFO Count: %d\n", fifoCount);

    // check for overflow (this should never happen unless our code is too inefficient)
    if ((mpuIntStatus & 0x10) || fifoCount > 84) {
        // reset so we can continue cleanly
        imu.resetFIFO();
        imu.debugSerial.printf("FIFO overflow!");

        // otherwise, check for DMP data ready interrupt (this should happen frequently)
    } else if (mpuIntStatus & 0x02) {
        // wait for correct available data length, should be a VERY short wait
        while (fifoCount < packetSize) fifoCount = imu.getFIFOCount();

         while (fifoCount > 41) {
        // read a packet from FIFO
        imu.getFIFOBytes(fifoBuffer, packetSize);

        // track FIFO count here in case there is > 1 packet available
        // (this lets us immediately read more without waiting for an interrupt)
        fifoCount -= packetSize;
        }

        // display YPR angles in degrees
        imu.dmpGetQuaternion(&q, fifoBuffer);
        imu.dmpGetGravity(&gravity, &q);
        imu.dmpGetYawPitchRoll(ypr, &q, &gravity);
        
        //if (fifoCount > 126)
       // imu.resetFIFO();

        ypr_use[0] = ypr[0] * 180/M_PI;
        ypr_use[1] = ypr[1] * 180/M_PI;
        ypr_use[2] = ypr[2] * 180/M_PI;

        /*
                if (compass.getDataReady()) {
                    // compass.getValues(&compass_x, &compass_y, &compass_z);
                    heading = compass.getHeadingXY() * 180/M_PI;
                }

                ypr[0] *= 0.98;
                ypr[0] += 0.02*heading;
                */

        if (box_demo)
            BT.printf("\nY%3.2f\nP%3.2f\nR%3.2f\n", ypr_use[0] - ypr_offset[0],
                      ypr_use[1] - ypr_offset[1], ypr_use[2] - ypr_offset[2]);

        //counterTask1++;
    }

    //LED[1] = !LED[1];
}