Diff: MicroBitMpr121.h

Revision:

0:fb4572fc4901

Child:

1:f6fed00a3ff2

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MicroBitMpr121.h	Mon Jan 16 08:46:27 2017 +0000
@@ -0,0 +1,149 @@
+/**
+ * @file    MPR121.h
+ * @brief   Device driver - MPR121 capactiive touch IC
+ * @author  sam grove
+ * @version 1.0
+ * @see     http://cache.freescale.com/files/sensors/doc/data_sheet/MPR121.pdf
+ *
+ * Copyright (c) 2013
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#ifndef MICROBITMPR121_H
+#define MICROBITMPR121_H
+
+#include "MicroBit.h"
+
+class MicroBitMpr121
+{
+private:
+    
+    I2C         *_i2c;
+    InterruptIn *_irq;
+    uint8_t      _i2c_addr;
+    volatile uint16_t _button;
+    volatile uint32_t _button_has_changed;
+    
+    /** The interrupt handler for the IRQ pin
+     */
+    void handler(void);
+
+public:
+    
+    /**
+     *  @enum MPR121_ADDR
+     *  @brief Possible terminations for the ADDR pin
+     */ 
+    enum MPR121_ADDR
+    { 
+        ADDR_VSS = 0x5A, /*!< ADDR connected to VSS */
+        ADDR_VDD,    /*!< ADDR connected to VDD */
+        ADDR_SCL,    /*!< ADDR connected to SDA */
+        ADDR_SDA     /*!< ADDR connected to SCL */
+    };
+    
+    /**
+     *  @enum MPR121_REGISTER
+     *  @brief The device register map
+     */
+    enum MPR121_REGISTER
+    {
+        ELE0_7_STAT = 0x00,
+        ELE8_11_STAT, ELE0_7_OOR_STAT, ELE8_11_OOR_STAT, EFD0LB, EFD0HB, 
+        EFD1LB, EFD1HB, EFD2LB, EFD2HB, EFD3LB, EFD3HB, EFD4LB, EFD4HB, EFD5LB, EFD5HB,
+        
+        EFD6LB = 0x10,
+        EFD6HB, EFD7LB, EFD7HB, EFD8LB, EFD8HB, EFD9LB, EFD9HB, EFD10LB,
+        EFD10HB, EFD11LB, EFD11HB, EFDPROXLB, EFDPROXHB, E0BV, E1BV,
+        
+        E2BV = 0x20,
+        E3BV, E4BV, E5BV, E6BV, E7BV, E8BV, E9BV, E10BV, E11BV, EPROXBV,
+        MHDR, NHDR, NCLR, FDLR, MHDF, 
+        
+        NHDF = 0x30,
+        NCLF, FDLF, NHDT, NCLT, FDLT, MHDPROXR, NHDPROXR, NCLPROXR,
+        FDLPROXR, MHDPROXF, NHDPROXF, NCLPROXF, FDLPROXF, NHDPROXT, NCLPROXT,
+        
+        FDLPROXT = 0x40,
+        E0TTH, E0RTH, E1TTH, E1RTH, E2TTH, E2RTH, E3TTH, E3RTH,
+        E4TTH, E4RTH, E5TTH, E5RTH, E6TTH, E6RTH, E7TTH,
+        
+        E7RTH = 0x50,
+        E8TTH, E8RTH, E9TTH, E9RTH, E10TTH, E10RTH, E11TTH, E11RTH,
+        EPROXTTH, EPROXRTH, DT_DR, CDC_CONFIG, CDT_CONFIG, ECR, CDC0,
+        
+        CDC1 = 0x60,
+        CDC2, CDC3, CDC4, CDC5, CDC6, CDC7, CDC8, CDC9, CDC10, CDC11, CDCPROX, CDT0_CDT1,
+        CDT2_CDT3, CDT4_CDT5, CDT6_CDT7, 
+        
+        CDT8_CDT9 = 0x70,
+        CDT10_CDT11, CDTPROX, GPIO_CTRL0, GPIO_CTRL1, GPIO_DATA, GPIO_DIR, GPIO_EN, GPIO_SET,
+        GPIO_CLR, GPIO_TOGGLE, AUTO_CFG0, AUTO_CFG1, USL, LSL, TL,
+        
+        SRST = 0x80
+    };
+    
+    /** Create the MPR121 object
+     *  @param i2c - A defined I2C object
+     *  @param pin - A defined InterruptIn object
+     *  @param i2c_addr - Connection of the address line
+     */    
+    MPR121(I2C &i2c, InterruptIn &pin, MPR121_ADDR i2c_addr);
+    
+    /** Clear state variables and initilize the dependant objects
+     */
+    void init(void);
+    
+    /** Allow the IC to run and collect user input
+     */
+    void enable(void);
+    
+    /** Stop the IC and put into low power mode
+     */
+    void disable(void);
+    
+    /** Determine if a new button press event occured
+     *  Upon calling the state is cleared until another press is detected
+     *  @return 1 if a press has been detected since the last call, 0 otherwise
+     */
+    uint32_t isPressed(void);
+    
+    /** Get the electrode status (ELE12 ... ELE0 -> b15 xxx b11 ... b0
+     *  The buttons are bit mapped. ELE0 = b0 ... ELE11 = b11 b12 ... b15 undefined
+     *  @return The state of all buttons
+     */
+    uint16_t buttonPressed(void);
+    
+    /** print the register map and values to the console
+     *  @param obj - a Serial object that prints to a console
+     */
+    void registerDump(Serial &obj) const;
+    
+    /** Write to a register (exposed for debugging reasons)
+     *  Note: most writes are only valid in stop mode
+     *  @param reg - The register to be written
+     *  @param data - The data to be written
+     */
+    void writeRegister(MPR121_REGISTER const reg, uint8_t const data) const;
+    
+    /** Read from a register (exposed for debugging reasons)
+     *  @param reg - The register to read from
+     *  @return The register contents
+     */
+    uint8_t readRegister(MPR121_REGISTER const reg) const;
+    
+};
+
+#endif
+