Orla Gilson / Mbed 2 deprecated WeatherLogger

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependencies:   BMP180 N5110 mbed

Embed: (wiki syntax)

« Back to documentation index

main.h File Reference
Namespaces | Functions | Variables

main.h File Reference

header file containing functions and variables More...

Go to the source code of this file.

Namespaces

namespace  lcd
 

bus output for Nokia 5110 LCD screen


namespace  bmp180
 

serial input for BMP180 sensor


namespace  local
 

creates local file system to write files to


namespace  leds
 

bus output for the two centre on-board leds


namespace  buttonleft
 

interrupt in function for the left hand button


namespace  BUT2
 

analog in function for the right hand button


namespace  POT
 

analog in function for the potentiometer


namespace  led
 

GPIO output for error LED.


namespace  buzzer
 

PWM output for piezo buzzer.


namespace  LDR
 

analog input for the light dependant resistor


Functions

void timerTExpired ()
 Expire Timer T; timer associated with temperature; sets timerTFlag to one.
void timerPExpired ()
 Expire Timer P; timer associated with pressure; sets timerPFlag to one.
void timerEExpired ()
 Expire Timer E; timer associated with error LED; sets timerEFlag to one.
void timerLEpired ()
 Expire Timer L; timer associated with error LED; sets timerLFlag to one.
void buttonPressed ()
 Press Button; interrupt associated with left button; sets buttonFlag to one.
void error ()
 Error Function; function supplies error function; LED lights up every 2 seconds; buzzer goes off simultaneously with the LED.
void writeDataToFile ()
 Write Data To File; function to write data to the flash drive.
void callTemp ()
 Calls Temperature; function reads the temperature from the sensor; prints the current temperature to the screen.
void callPress ()
 Calls Pressure; function reads the pressure from the sensor; prints the current pressure to the screen.
void callLight ()
 Calls Light; function reads the light from the LDR; prints the current temperature to the screen.
void readTemp ()
 Read Temperature; calls callTemp after 0.1 seconds; reads temperature every 60 seconds; prints temperature to screen; updates screen every 60 seconds with new temperature.
void readPress ()
 Read Pressure; calls callPress after 0.1 seconds; reads pressure every 30 minutes/1800 seconds; prints pressure to screen; updates screen every 30 minutes with new pressure.
void readLight ()
 Read Light; calls callLight after 0.1 seconds; reads light every 60 seconds; prints light to screen; updates screen every 60 seconds with new light.
void measurement ()
 Measurement; read measurement from sensor; set temperature; set pressure.
void tempGraph ()
 Temperature Graph; read temperature every 2 seconds; create temporary array; read temperature values into array; scale temperature array; plot array.
void pressGraph ()
 Pressure Graph; read pressure every 2 seconds; create temporary array; read pressure values into array; scale pressure array; plot array.
void lightGraph ()
 Light Graph; read light every 2 seconds; create temporary array; read light values into array; scale light array; plot array.
void menu ()
 Menu; print temperature screen if potentiometer is greater than 2/3; print pressure screen if potentiometer is between 1/3 and 2/3; print light screen if potentiometer is less than 1/3.
void clearCells ()
 Clear Cells; cycle through pixels and set to zero.

Variables

int nx = 84
 Sets x axis of screen.
int ny = 48
 Sets y axis of screen.
int i
 Coordinates of a pixel.
float temperature
 initialising a decimal variable
float pressure
 initialising a decimal variable
int counter = 0
 initialise the counter as an integer
int buttonFlag = 0
 initialise the flag for the button
Timeout callT
 timeout used for temperature
Timeout callP
 timeout used for pressure
Timeout callL
 timeout used for light
Ticker timerT
 ticker function for temperature
Ticker timerP
 ticker function for pressure
Ticker timerE
 ticker function for error
Ticker timerL
 ticker function for light
int timerTFlag = 0
 initialise flag for temperature
int timerPFlag = 0
 initialise flag for pressure
int timerEFlag = 0
 initialise flag for error
int timerLFlag = 0
 initialise flag for light

Detailed Description

header file containing functions and variables

Revision 1.0

Author:
Orla Gilson
Date:
May 2015

Definition in file main.h.

Function Documentation

void buttonPressed (  )

Press Button; interrupt associated with left button; sets buttonFlag to one.

Definition at line 30 of file main.cpp.

void callLight (  )

Calls Light; function reads the light from the LDR; prints the current temperature to the screen.

Definition at line 85 of file main.cpp.

void callPress (  )

Calls Pressure; function reads the pressure from the sensor; prints the current pressure to the screen.

Definition at line 71 of file main.cpp.

void callTemp (  )

Calls Temperature; function reads the temperature from the sensor; prints the current temperature to the screen.

Definition at line 57 of file main.cpp.

void clearCells (  )

Clear Cells; cycle through pixels and set to zero.

Definition at line 335 of file main.cpp.

void error (  )

Error Function; function supplies error function; LED lights up every 2 seconds; buzzer goes off simultaneously with the LED.

Definition at line 34 of file main.cpp.

void lightGraph (  )

Light Graph; read light every 2 seconds; create temporary array; read light values into array; scale light array; plot array.

Definition at line 247 of file main.cpp.

void measurement (  )

Measurement; read measurement from sensor; set temperature; set pressure.

Definition at line 180 of file main.cpp.

void menu (  )

Menu; print temperature screen if potentiometer is greater than 2/3; print pressure screen if potentiometer is between 1/3 and 2/3; print light screen if potentiometer is less than 1/3.

Definition at line 277 of file main.cpp.

void pressGraph (  )

Pressure Graph; read pressure every 2 seconds; create temporary array; read pressure values into array; scale pressure array; plot array.

Definition at line 217 of file main.cpp.

void readLight (  )

Read Light; calls callLight after 0.1 seconds; reads light every 60 seconds; prints light to screen; updates screen every 60 seconds with new light.

Definition at line 153 of file main.cpp.

void readPress (  )

Read Pressure; calls callPress after 0.1 seconds; reads pressure every 30 minutes/1800 seconds; prints pressure to screen; updates screen every 30 minutes with new pressure.

Definition at line 126 of file main.cpp.

void readTemp (  )

Read Temperature; calls callTemp after 0.1 seconds; reads temperature every 60 seconds; prints temperature to screen; updates screen every 60 seconds with new temperature.

Definition at line 99 of file main.cpp.

void tempGraph (  )

Temperature Graph; read temperature every 2 seconds; create temporary array; read temperature values into array; scale temperature array; plot array.

Definition at line 187 of file main.cpp.

void timerEExpired (  )

Expire Timer E; timer associated with error LED; sets timerEFlag to one.

Definition at line 22 of file main.cpp.

void timerLEpired (  )

Expire Timer L; timer associated with error LED; sets timerLFlag to one.

void timerPExpired (  )

Expire Timer P; timer associated with pressure; sets timerPFlag to one.

Definition at line 18 of file main.cpp.

void timerTExpired (  )

Expire Timer T; timer associated with temperature; sets timerTFlag to one.

Definition at line 14 of file main.cpp.

void writeDataToFile (  )

Write Data To File; function to write data to the flash drive.

Variable Documentation

int buttonFlag = 0

initialise the flag for the button

Definition at line 114 of file main.h.

Timeout callL

timeout used for light

Definition at line 129 of file main.h.

Timeout callP

timeout used for pressure

Definition at line 124 of file main.h.

Timeout callT

timeout used for temperature

Definition at line 119 of file main.h.

int counter = 0

initialise the counter as an integer

Definition at line 109 of file main.h.

int i

Coordinates of a pixel.

Parameters:
i- x value of coordinate (0-83)
j- y value of coordinate (0-47

Definition at line 94 of file main.h.

int nx = 84

Sets x axis of screen.

Parameters:
nx- length of x axis

Definition at line 81 of file main.h.

int ny = 48

Sets y axis of screen.

Parameters:
ny- length of y axis

Definition at line 87 of file main.h.

float pressure

initialising a decimal variable

Definition at line 104 of file main.h.

float temperature

initialising a decimal variable

Definition at line 99 of file main.h.

Ticker timerE

ticker function for error

Definition at line 144 of file main.h.

int timerEFlag = 0

initialise flag for error

Definition at line 164 of file main.h.

Ticker timerL

ticker function for light

Definition at line 149 of file main.h.

int timerLFlag = 0

initialise flag for light

Definition at line 169 of file main.h.

Ticker timerP

ticker function for pressure

Definition at line 139 of file main.h.

int timerPFlag = 0

initialise flag for pressure

Definition at line 159 of file main.h.

Ticker timerT

ticker function for temperature

Definition at line 134 of file main.h.

int timerTFlag = 0

initialise flag for temperature

Definition at line 154 of file main.h.

Generated on Thu Jul 14 2022 02:40:59 by  doxygen 1.7.2