File content as of revision 0:5c097bb1300f:

#include "Sensor.h"
#ifdef DEBUG_S
    #include "mbed.h"
    Serial p(USBTX, USBRX);
    Timer td;
    int printCounter = 0;
    int tIntStatus = 0;
    int tgetFIFOCount = 0;
    int tgetFIFOCheck = 0;
    int tgetFIFOreset = 0;
    int tgetFIFOBytes = 0;
    int teulars = 0;
    #define NL "\n\r"
    #define PRINT(x) p.printf(x)   //Serial.print(x)
    #define PRINTF p.printf   //Serial.print(x, y)
    #define PRINTLN(x) PRINT(x);PRINT(NL)
    #define START td.start(); 
    #define STOP td.stop()
    #define RESET td.reset()
    #define READ td.read_us()
    #define GET(x) x = READ
#else
    #define PRINT(x)
    #define PRINTF(x, y)
    #define PRINTLN(x)
    #define START 
    #define STOP  
    #define RESET 
    #define READ 
    #define GET(x)
#endif


Sensor::Sensor() : dmp()
{
    gyro_orientation[0] = -1;
    gyro_orientation[1] = 0;
    gyro_orientation[2] = 0;
    gyro_orientation[3] = 0;
    gyro_orientation[4] = -1;
    gyro_orientation[5] = 0;
    gyro_orientation[6] = 0;
    gyro_orientation[7] = 0;
    gyro_orientation[8] = 1;
//InvMpu mpu;
}

int Sensor::initialize()
{
    int result = 0;
    result -= mpu_initialize(); 
    result -= dmp_initialize();
    run_self_test();
    return result;  
}

int Sensor::mpu_initialize()
{    
    int result = 0;
    unsigned char accel_fsr;
    unsigned short gyro_rate, gyro_fsr;
    long accel_bias[3], gyro_bias[3];
    result -= dmp.testConnection() ;
    result -= dmp.mpu_init();
    /* Get/set hardware configuration. Start gyro. */
    /* Wake up all sensors. */
    result -= dmp.mpu_set_sensors(INV_XYZ_GYRO | INV_XYZ_ACCEL);
    /* Push both gyro and accel data into the FIFO. */
    result -= dmp.mpu_configure_fifo(INV_XYZ_GYRO | INV_XYZ_ACCEL);
    result -= dmp.mpu_set_sample_rate(SAMPLE_RATE);
    /* Read back configuration in case it was set improperly. */
    dmp.mpu_get_sample_rate(&gyro_rate);
    dmp.mpu_get_gyro_fsr(&gyro_fsr);
    dmp.mpu_get_accel_fsr(&accel_fsr);
    
    if( !(gyro_rate == SAMPLE_RATE && gyro_fsr == 2000 && accel_fsr == 2) )
        result -= 1;
    
//    dmp.mpu_read_6500_gyro_bias(accel_bias);
    if (dmp.mpu_run_self_test(gyro_bias,accel_bias) != 0x07);
        result -= 1;
    return result;
}

int Sensor::dmp_initialize()
{   
    int result = 0;
    // Instruction via MotionDriver_Tutorial
    result -= dmp.dmp_load_motion_driver_firmware();
    unsigned short temp = dmp.inv_orientation_matrix_to_scalar(gyro_orientation);
    result -= dmp.dmp_set_orientation(temp);
//    unsigned short mask = DMP_FEATURE_6X_LP_QUAT | DMP_FEATURE_SEND_CAL_GYRO |  DMP_FEATURE_GYRO_CAL | DMP_FEATURE_SEND_RAW_ACCEL ;
    unsigned short mask = DMP_FEATURE_6X_LP_QUAT | DMP_FEATURE_SEND_CAL_GYRO |  DMP_FEATURE_GYRO_CAL ;
    result -= dmp.dmp_enable_feature(mask);
    result -= dmp.dmp_set_fifo_rate(100); 
    result -= dmp.mpu_set_dmp_state(1);
    return result;
}


void Sensor::run_self_test()
{
    int result;
    long gyro_cal[3], accel_cal[3];
    unsigned char i = 0;

    result = dmp.mpu_run_self_test(gyro_cal, accel_cal);
    if (result == 0x7) {
        /* Test passed. We can trust the gyro data here, so let's push it down
         * to the DMP.
         */
        for(i = 0; i<3; i++) {
            gyro_cal[i] = (long)(gyro_cal[i] * 32.8f); //convert to +-1000dps
            accel_cal[i] *= 4096.f; //convert to +-8G
            accel_cal[i] = accel[i] >> 16;
            gyro_cal[i] = (long)(gyro_cal[i] >> 16);
        }
        dmp.mpu_set_gyro_bias_reg(gyro_cal);
        dmp.mpu_set_accel_bias_6050_reg(accel_cal);
    }
}

int Sensor::updateAngles()
{
    bool result = false;
    long quat[4];
    unsigned char more;
    short sensors;
    result = dmp.dmp_read_fifo(gyro, accel, quat, NULL, &sensors, &more);
    if (result == 0)
    {
        q.set(quat);
        dmp.dmpGetGravity(&gravity,&q);
        dmp.dmpGetYawPitchRoll(ypr,&q,&gravity);
    }
//    PRINTF("More: %d\n\r",more);
    return more;
}

float Sensor::getPitch()
{
    return ypr[1] * RAD2DEG;
}
float Sensor::getRoll()
{
    return ypr[2] * RAD2DEG;
}
float Sensor::getYaw()
{
    return ypr[0] * RAD2DEG;
}

float Sensor::getGyroPitch()
{
    return gyro[1] * GYRO_GAIN;
}
float Sensor::getGyroRoll()
{
    return gyro[2] * GYRO_GAIN;   
}
float Sensor::getGyroYaw()
{
    return gyro[0] * GYRO_GAIN;   
}