Chau Vo / mbed-dev

mbed library sources. Supersedes mbed-src. RTC working even after reset

Fork of mbed-dev by mbed official

api/SPI.h@144:ef7eb2e8f9f7, 2016-09-02 (annotated)

Committer:
<>
Date:
Fri Sep 02 15:07:44 2016 +0100
Revision:
144:ef7eb2e8f9f7
Parent:
0:9b334a45a8ff 
This updates the lib to the mbed lib v125

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /* mbed Microcontroller Library
<> 144:ef7eb2e8f9f7 2 * Copyright (c) 2006-2015 ARM Limited
<> 144:ef7eb2e8f9f7 3 *
<> 144:ef7eb2e8f9f7 4 * Licensed under the Apache License, Version 2.0 (the "License");
<> 144:ef7eb2e8f9f7 5 * you may not use this file except in compliance with the License.
<> 144:ef7eb2e8f9f7 6 * You may obtain a copy of the License at
<> 144:ef7eb2e8f9f7 7 *
<> 144:ef7eb2e8f9f7 8 * http://www.apache.org/licenses/LICENSE-2.0
<> 144:ef7eb2e8f9f7 9 *
<> 144:ef7eb2e8f9f7 10 * Unless required by applicable law or agreed to in writing, software
<> 144:ef7eb2e8f9f7 11 * distributed under the License is distributed on an "AS IS" BASIS,
<> 144:ef7eb2e8f9f7 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
<> 144:ef7eb2e8f9f7 13 * See the License for the specific language governing permissions and
<> 144:ef7eb2e8f9f7 14 * limitations under the License.
<> 144:ef7eb2e8f9f7 15 */
<> 144:ef7eb2e8f9f7 16 #ifndef MBED_SPI_H
<> 144:ef7eb2e8f9f7 17 #define MBED_SPI_H
<> 144:ef7eb2e8f9f7 18
<> 144:ef7eb2e8f9f7 19 #include "platform.h"
<> 144:ef7eb2e8f9f7 20
<> 144:ef7eb2e8f9f7 21 #if DEVICE_SPI
<> 144:ef7eb2e8f9f7 22
<> 144:ef7eb2e8f9f7 23 #include "PlatformMutex.h"
<> 144:ef7eb2e8f9f7 24 #include "spi_api.h"
<> 144:ef7eb2e8f9f7 25 #include "SingletonPtr.h"
<> 144:ef7eb2e8f9f7 26
<> 144:ef7eb2e8f9f7 27 #if DEVICE_SPI_ASYNCH
<> 144:ef7eb2e8f9f7 28 #include "CThunk.h"
<> 144:ef7eb2e8f9f7 29 #include "dma_api.h"
<> 144:ef7eb2e8f9f7 30 #include "CircularBuffer.h"
<> 144:ef7eb2e8f9f7 31 #include "FunctionPointer.h"
<> 144:ef7eb2e8f9f7 32 #include "Transaction.h"
<> 144:ef7eb2e8f9f7 33 #endif
<> 144:ef7eb2e8f9f7 34
<> 144:ef7eb2e8f9f7 35 namespace mbed {
<> 144:ef7eb2e8f9f7 36
<> 144:ef7eb2e8f9f7 37 /** A SPI Master, used for communicating with SPI slave devices
<> 144:ef7eb2e8f9f7 38 *
<> 144:ef7eb2e8f9f7 39 * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
<> 144:ef7eb2e8f9f7 40 *
<> 144:ef7eb2e8f9f7 41 * Most SPI devices will also require Chip Select and Reset signals. These
<> 144:ef7eb2e8f9f7 42 * can be controlled using <DigitalOut> pins
<> 144:ef7eb2e8f9f7 43 *
<> 144:ef7eb2e8f9f7 44 * @Note Synchronization level: Thread safe
<> 144:ef7eb2e8f9f7 45 *
<> 144:ef7eb2e8f9f7 46 * Example:
<> 144:ef7eb2e8f9f7 47 * @code
<> 144:ef7eb2e8f9f7 48 * // Send a byte to a SPI slave, and record the response
<> 144:ef7eb2e8f9f7 49 *
<> 144:ef7eb2e8f9f7 50 * #include "mbed.h"
<> 144:ef7eb2e8f9f7 51 *
<> 144:ef7eb2e8f9f7 52 * // hardware ssel (where applicable)
<> 144:ef7eb2e8f9f7 53 * //SPI device(p5, p6, p7, p8); // mosi, miso, sclk, ssel
<> 144:ef7eb2e8f9f7 54 *
<> 144:ef7eb2e8f9f7 55 * // software ssel
<> 144:ef7eb2e8f9f7 56 * SPI device(p5, p6, p7); // mosi, miso, sclk
<> 144:ef7eb2e8f9f7 57 * DigitalOut cs(p8); // ssel
<> 144:ef7eb2e8f9f7 58 *
<> 144:ef7eb2e8f9f7 59 * int main() {
<> 144:ef7eb2e8f9f7 60 * // hardware ssel (where applicable)
<> 144:ef7eb2e8f9f7 61 * //int response = device.write(0xFF);
<> 144:ef7eb2e8f9f7 62 *
<> 144:ef7eb2e8f9f7 63 * device.lock();
<> 144:ef7eb2e8f9f7 64 * // software ssel
<> 144:ef7eb2e8f9f7 65 * cs = 0;
<> 144:ef7eb2e8f9f7 66 * int response = device.write(0xFF);
<> 144:ef7eb2e8f9f7 67 * cs = 1;
<> 144:ef7eb2e8f9f7 68 * device.unlock();
<> 144:ef7eb2e8f9f7 69 *
<> 144:ef7eb2e8f9f7 70 * }
<> 144:ef7eb2e8f9f7 71 * @endcode
<> 144:ef7eb2e8f9f7 72 */
<> 144:ef7eb2e8f9f7 73 class SPI {
<> 144:ef7eb2e8f9f7 74
<> 144:ef7eb2e8f9f7 75 public:
<> 144:ef7eb2e8f9f7 76
<> 144:ef7eb2e8f9f7 77 /** Create a SPI master connected to the specified pins
<> 144:ef7eb2e8f9f7 78 *
<> 144:ef7eb2e8f9f7 79 * mosi or miso can be specfied as NC if not used
<> 144:ef7eb2e8f9f7 80 *
<> 144:ef7eb2e8f9f7 81 * @param mosi SPI Master Out, Slave In pin
<> 144:ef7eb2e8f9f7 82 * @param miso SPI Master In, Slave Out pin
<> 144:ef7eb2e8f9f7 83 * @param sclk SPI Clock pin
<> 144:ef7eb2e8f9f7 84 * @param ssel SPI chip select pin
<> 144:ef7eb2e8f9f7 85 */
<> 144:ef7eb2e8f9f7 86 SPI(PinName mosi, PinName miso, PinName sclk, PinName ssel=NC);
<> 144:ef7eb2e8f9f7 87
<> 144:ef7eb2e8f9f7 88 /** Configure the data transmission format
<> 144:ef7eb2e8f9f7 89 *
<> 144:ef7eb2e8f9f7 90 * @param bits Number of bits per SPI frame (4 - 16)
<> 144:ef7eb2e8f9f7 91 * @param mode Clock polarity and phase mode (0 - 3)
<> 144:ef7eb2e8f9f7 92 *
<> 144:ef7eb2e8f9f7 93 * @code
<> 144:ef7eb2e8f9f7 94 * mode | POL PHA
<> 144:ef7eb2e8f9f7 95 * -----+--------
<> 144:ef7eb2e8f9f7 96 * 0 | 0 0
<> 144:ef7eb2e8f9f7 97 * 1 | 0 1
<> 144:ef7eb2e8f9f7 98 * 2 | 1 0
<> 144:ef7eb2e8f9f7 99 * 3 | 1 1
<> 144:ef7eb2e8f9f7 100 * @endcode
<> 144:ef7eb2e8f9f7 101 */
<> 144:ef7eb2e8f9f7 102 void format(int bits, int mode = 0);
<> 144:ef7eb2e8f9f7 103
<> 144:ef7eb2e8f9f7 104 /** Set the spi bus clock frequency
<> 144:ef7eb2e8f9f7 105 *
<> 144:ef7eb2e8f9f7 106 * @param hz SCLK frequency in hz (default = 1MHz)
<> 144:ef7eb2e8f9f7 107 */
<> 144:ef7eb2e8f9f7 108 void frequency(int hz = 1000000);
<> 144:ef7eb2e8f9f7 109
<> 144:ef7eb2e8f9f7 110 /** Write to the SPI Slave and return the response
<> 144:ef7eb2e8f9f7 111 *
<> 144:ef7eb2e8f9f7 112 * @param value Data to be sent to the SPI slave
<> 144:ef7eb2e8f9f7 113 *
<> 144:ef7eb2e8f9f7 114 * @returns
<> 144:ef7eb2e8f9f7 115 * Response from the SPI slave
<> 144:ef7eb2e8f9f7 116 */
<> 144:ef7eb2e8f9f7 117 virtual int write(int value);
<> 144:ef7eb2e8f9f7 118
<> 144:ef7eb2e8f9f7 119 /** Acquire exclusive access to this SPI bus
<> 144:ef7eb2e8f9f7 120 */
<> 144:ef7eb2e8f9f7 121 virtual void lock(void);
<> 144:ef7eb2e8f9f7 122
<> 144:ef7eb2e8f9f7 123 /** Release exclusive access to this SPI bus
<> 144:ef7eb2e8f9f7 124 */
<> 144:ef7eb2e8f9f7 125 virtual void unlock(void);
<> 144:ef7eb2e8f9f7 126
<> 144:ef7eb2e8f9f7 127 #if DEVICE_SPI_ASYNCH
<> 144:ef7eb2e8f9f7 128
<> 144:ef7eb2e8f9f7 129 /** Start non-blocking SPI transfer using 8bit buffers.
<> 144:ef7eb2e8f9f7 130 *
<> 144:ef7eb2e8f9f7 131 * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
<> 144:ef7eb2e8f9f7 132 * the default SPI value is sent
<> 144:ef7eb2e8f9f7 133 * @param tx_length The length of TX buffer in bytes
<> 144:ef7eb2e8f9f7 134 * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
<> 144:ef7eb2e8f9f7 135 * received data are ignored
<> 144:ef7eb2e8f9f7 136 * @param rx_length The length of RX buffer in bytes
<> 144:ef7eb2e8f9f7 137 * @param callback The event callback function
<> 144:ef7eb2e8f9f7 138 * @param event The logical OR of events to modify. Look at spi hal header file for SPI events.
<> 144:ef7eb2e8f9f7 139 * @return Zero if the transfer has started, or -1 if SPI peripheral is busy
<> 144:ef7eb2e8f9f7 140 */
<> 144:ef7eb2e8f9f7 141 template<typename Type>
<> 144:ef7eb2e8f9f7 142 int transfer(const Type *tx_buffer, int tx_length, Type *rx_buffer, int rx_length, const event_callback_t& callback, int event = SPI_EVENT_COMPLETE) {
<> 144:ef7eb2e8f9f7 143 if (spi_active(&_spi)) {
<> 144:ef7eb2e8f9f7 144 return queue_transfer(tx_buffer, tx_length, rx_buffer, rx_length, sizeof(Type)*8, callback, event);
<> 144:ef7eb2e8f9f7 145 }
<> 144:ef7eb2e8f9f7 146 start_transfer(tx_buffer, tx_length, rx_buffer, rx_length, sizeof(Type)*8, callback, event);
<> 144:ef7eb2e8f9f7 147 return 0;
<> 144:ef7eb2e8f9f7 148 }
<> 144:ef7eb2e8f9f7 149
<> 144:ef7eb2e8f9f7 150 /** Abort the on-going SPI transfer, and continue with transfer's in the queue if any.
<> 144:ef7eb2e8f9f7 151 */
<> 144:ef7eb2e8f9f7 152 void abort_transfer();
<> 144:ef7eb2e8f9f7 153
<> 144:ef7eb2e8f9f7 154 /** Clear the transaction buffer
<> 144:ef7eb2e8f9f7 155 */
<> 144:ef7eb2e8f9f7 156 void clear_transfer_buffer();
<> 144:ef7eb2e8f9f7 157
<> 144:ef7eb2e8f9f7 158 /** Clear the transaction buffer and abort on-going transfer.
<> 144:ef7eb2e8f9f7 159 */
<> 144:ef7eb2e8f9f7 160 void abort_all_transfers();
<> 144:ef7eb2e8f9f7 161
<> 144:ef7eb2e8f9f7 162 /** Configure DMA usage suggestion for non-blocking transfers
<> 144:ef7eb2e8f9f7 163 *
<> 144:ef7eb2e8f9f7 164 * @param usage The usage DMA hint for peripheral
<> 144:ef7eb2e8f9f7 165 * @return Zero if the usage was set, -1 if a transaction is on-going
<> 144:ef7eb2e8f9f7 166 */
<> 144:ef7eb2e8f9f7 167 int set_dma_usage(DMAUsage usage);
<> 144:ef7eb2e8f9f7 168
<> 144:ef7eb2e8f9f7 169 protected:
<> 144:ef7eb2e8f9f7 170 /** SPI IRQ handler
<> 144:ef7eb2e8f9f7 171 *
<> 144:ef7eb2e8f9f7 172 */
<> 144:ef7eb2e8f9f7 173 void irq_handler_asynch(void);
<> 144:ef7eb2e8f9f7 174
<> 144:ef7eb2e8f9f7 175 /** Common transfer method
<> 144:ef7eb2e8f9f7 176 *
<> 144:ef7eb2e8f9f7 177 * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
<> 144:ef7eb2e8f9f7 178 * the default SPI value is sent
<> 144:ef7eb2e8f9f7 179 * @param tx_length The length of TX buffer in bytes
<> 144:ef7eb2e8f9f7 180 * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
<> 144:ef7eb2e8f9f7 181 * received data are ignored
<> 144:ef7eb2e8f9f7 182 * @param rx_length The length of RX buffer in bytes
<> 144:ef7eb2e8f9f7 183 * @param bit_width The buffers element width
<> 144:ef7eb2e8f9f7 184 * @param callback The event callback function
<> 144:ef7eb2e8f9f7 185 * @param event The logical OR of events to modify
<> 144:ef7eb2e8f9f7 186 * @return Zero if the transfer has started or was added to the queue, or -1 if SPI peripheral is busy/buffer is full
<> 144:ef7eb2e8f9f7 187 */
<> 144:ef7eb2e8f9f7 188 int transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event);
<> 144:ef7eb2e8f9f7 189
<> 144:ef7eb2e8f9f7 190 /**
<> 144:ef7eb2e8f9f7 191 *
<> 144:ef7eb2e8f9f7 192 * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
<> 144:ef7eb2e8f9f7 193 * the default SPI value is sent
<> 144:ef7eb2e8f9f7 194 * @param tx_length The length of TX buffer in bytes
<> 144:ef7eb2e8f9f7 195 * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
<> 144:ef7eb2e8f9f7 196 * received data are ignored
<> 144:ef7eb2e8f9f7 197 * @param rx_length The length of RX buffer in bytes
<> 144:ef7eb2e8f9f7 198 * @param bit_width The buffers element width
<> 144:ef7eb2e8f9f7 199 * @param callback The event callback function
<> 144:ef7eb2e8f9f7 200 * @param event The logical OR of events to modify
<> 144:ef7eb2e8f9f7 201 * @return Zero if a transfer was added to the queue, or -1 if the queue is full
<> 144:ef7eb2e8f9f7 202 */
<> 144:ef7eb2e8f9f7 203 int queue_transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event);
<> 144:ef7eb2e8f9f7 204
<> 144:ef7eb2e8f9f7 205 /** Configures a callback, spi peripheral and initiate a new transfer
<> 144:ef7eb2e8f9f7 206 *
<> 144:ef7eb2e8f9f7 207 * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
<> 144:ef7eb2e8f9f7 208 * the default SPI value is sent
<> 144:ef7eb2e8f9f7 209 * @param tx_length The length of TX buffer in bytes
<> 144:ef7eb2e8f9f7 210 * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
<> 144:ef7eb2e8f9f7 211 * received data are ignored
<> 144:ef7eb2e8f9f7 212 * @param rx_length The length of RX buffer in bytes
<> 144:ef7eb2e8f9f7 213 * @param bit_width The buffers element width
<> 144:ef7eb2e8f9f7 214 * @param callback The event callback function
<> 144:ef7eb2e8f9f7 215 * @param event The logical OR of events to modify
<> 144:ef7eb2e8f9f7 216 */
<> 144:ef7eb2e8f9f7 217 void start_transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event);
<> 144:ef7eb2e8f9f7 218
<> 144:ef7eb2e8f9f7 219 #if TRANSACTION_QUEUE_SIZE_SPI
<> 144:ef7eb2e8f9f7 220
<> 144:ef7eb2e8f9f7 221 /** Start a new transaction
<> 144:ef7eb2e8f9f7 222 *
<> 144:ef7eb2e8f9f7 223 * @param data Transaction data
<> 144:ef7eb2e8f9f7 224 */
<> 144:ef7eb2e8f9f7 225 void start_transaction(transaction_t *data);
<> 144:ef7eb2e8f9f7 226
<> 144:ef7eb2e8f9f7 227 /** Dequeue a transaction
<> 144:ef7eb2e8f9f7 228 *
<> 144:ef7eb2e8f9f7 229 */
<> 144:ef7eb2e8f9f7 230 void dequeue_transaction();
<> 144:ef7eb2e8f9f7 231 static CircularBuffer<Transaction<SPI>, TRANSACTION_QUEUE_SIZE_SPI> _transaction_buffer;
<> 144:ef7eb2e8f9f7 232 #endif
<> 144:ef7eb2e8f9f7 233
<> 144:ef7eb2e8f9f7 234 #endif
<> 144:ef7eb2e8f9f7 235
<> 144:ef7eb2e8f9f7 236 public:
<> 144:ef7eb2e8f9f7 237 virtual ~SPI() {
<> 144:ef7eb2e8f9f7 238 }
<> 144:ef7eb2e8f9f7 239
<> 144:ef7eb2e8f9f7 240 protected:
<> 144:ef7eb2e8f9f7 241 spi_t _spi;
<> 144:ef7eb2e8f9f7 242
<> 144:ef7eb2e8f9f7 243 #if DEVICE_SPI_ASYNCH
<> 144:ef7eb2e8f9f7 244 CThunk<SPI> _irq;
<> 144:ef7eb2e8f9f7 245 event_callback_t _callback;
<> 144:ef7eb2e8f9f7 246 DMAUsage _usage;
<> 144:ef7eb2e8f9f7 247 #endif
<> 144:ef7eb2e8f9f7 248
<> 144:ef7eb2e8f9f7 249 void aquire(void);
<> 144:ef7eb2e8f9f7 250 static SPI *_owner;
<> 144:ef7eb2e8f9f7 251 static SingletonPtr<PlatformMutex> _mutex;
<> 144:ef7eb2e8f9f7 252 int _bits;
<> 144:ef7eb2e8f9f7 253 int _mode;
<> 144:ef7eb2e8f9f7 254 int _hz;
<> 144:ef7eb2e8f9f7 255 };
<> 144:ef7eb2e8f9f7 256
<> 144:ef7eb2e8f9f7 257 } // namespace mbed
<> 144:ef7eb2e8f9f7 258
<> 144:ef7eb2e8f9f7 259 #endif
<> 144:ef7eb2e8f9f7 260
<> 144:ef7eb2e8f9f7 261 #endif