Webserver only w/o any other functions, single thread. Running on STM32F013+W5500
Dependencies: NTPClient W5500Interface Watchdog device_configuration eeprom_flash mbed-rpc-nucleo mbed-rtos mbed
Fork of F103-Serial-to-Ethernet by
readme.txt@27:22f289beceb8, 2014-12-29 (annotated)
- Committer:
- olympux
- Date:
- Mon Dec 29 21:40:55 2014 +0000
- Revision:
- 27:22f289beceb8
- Parent:
- 26:09e0dd020900
- Child:
- 28:00c0c20d03c1
Added and tested Rpc with TCP/UDP
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
olympux | 19:05934ee9ee67 | 1 | Features |
olympux | 18:ca499a2e7da6 | 2 | 0. Wait for 2s after resetting for ethernet to work. |
olympux | 18:ca499a2e7da6 | 3 | 1. When auto update enabled and no TCP server is running, module will try to connect to server which results in a timeout every 15s. |
olympux | 18:ca499a2e7da6 | 4 | This makes UDP packets take more time to be received and processed by the module. The result is slow UDP commands, such as Discovery. |
olympux | 19:05934ee9ee67 | 5 | To make it faster, start a TCP server on Hercules. The module will connect to it to transmit updates. |
olympux | 19:05934ee9ee67 | 6 | 2. Process a tcp packet including many receiving frames |
olympux | 19:05934ee9ee67 | 7 | |
olympux | 19:05934ee9ee67 | 8 | |
olympux | 19:05934ee9ee67 | 9 | v1.0 25/10/2014 |
olympux | 19:05934ee9ee67 | 10 | + Added: process many receiving frames in one tcp packet |
olympux | 20:71c7950fdd91 | 11 | + Bug: TCP server will reply with error #10061 if a previous tcp client connects and quickly disconnects. |
olympux | 20:71c7950fdd91 | 12 | |
olympux | 20:71c7950fdd91 | 13 | v1.1 15/11/2014 |
olympux | 20:71c7950fdd91 | 14 | + Added: watchdog timer |
olympux | 22:e5f0aa929c44 | 15 | + Modified: enter config mode forever when received discovery command |
olympux | 23:47ee805435b1 | 16 | |
olympux | 25:48dd18cc147c | 17 | v1.1.1 27/11/2014 |
olympux | 25:48dd18cc147c | 18 | + Added: checking a configuration command to see if it starts with "NN". Otherwise, it could be data was sent using UDP connection. |
olympux | 25:48dd18cc147c | 19 | |
olympux | 25:48dd18cc147c | 20 | v1.2 30/11/2014 |
olympux | 25:48dd18cc147c | 21 | + Added: Discovery command now returns NNIO MAC IP |
olympux | 25:48dd18cc147c | 22 | + Added: receive and process receiving protocol using UDP |
olympux | 25:48dd18cc147c | 23 | |
olympux | 27:22f289beceb8 | 24 | v1.2.1 01/12/2014 (demo version: git rev25) |
olympux | 27:22f289beceb8 | 25 | + Modified: enter config mode with query ip command, not discovery command |
olympux | 27:22f289beceb8 | 26 | |
olympux | 27:22f289beceb8 | 27 | v2.0 24/12/2014 |
olympux | 27:22f289beceb8 | 28 | + Use official mbed-rtos |
olympux | 27:22f289beceb8 | 29 | + Updated: configuration comands now use prefix NNCF, control commands use prefix NNIO. |
olympux | 27:22f289beceb8 | 30 | + Run with demo software v2.0 |
olympux | 27:22f289beceb8 | 31 | + Added RPC through TCP/UDP: tested after fixed (Rpc)DigitalIn/Out names. |
olympux | 27:22f289beceb8 | 32 | RPC control commands can be sent to TCP/UDP server on NNIO module. However, no reply yet, only debug with uart. |