Webserver only w/o any other functions, single thread. Running on STM32F013+W5500
Dependencies: NTPClient W5500Interface Watchdog device_configuration eeprom_flash mbed-rpc-nucleo mbed-rtos mbed
Fork of F103-Serial-to-Ethernet by
Diff: main.cpp
- Revision:
- 0:c2eac797face
- Child:
- 2:18f10e7209f4
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/main.cpp Sat Sep 20 20:42:49 2014 +0000 @@ -0,0 +1,125 @@ +/* +* +* Test program for W5500 mbed Library + +*/ +#include "mbed.h" +#include "EthernetInterface.h" +#include "rtos.h" + +#define ECHO_SERVER_PORT 5000 + +/** +* Setting DHCP or static +*/ +//#define USE_DHCP + +/** +* Setting the platform to test +*/ +//#define LPC +#define ST_NUCLEO +//#define FRDM_KL25Z +//#define Seeeduino_Arch + +#ifdef LPC +// LPC1768 & LPC11U24 +SPI spi(p5, p6, p7); // mosi, miso, sclk +WIZnetInterface eth(&spi, p8, p9); // spi, cs, reset +#endif + +#ifdef ST_NUCLEO +// ST Nucleo +SPI spi(PA_7, PA_6, PA_5); // mosi, miso, sclk +EthernetInterface eth(&spi, PC_8, PC_9); // spi, cs, reset +#endif + +#ifdef FRDM_KL25Z +// Freescale FRDM KL25Z +SPI spi(PTD2, PTD3, PTD1); // mosi, miso, sclk +WIZnetInterface eth(&spi, PTD0, PTA20); // spi, cs, reset +#endif + +#ifdef Seeeduino_Arch +// Seeedstudio Arch +SPI spi(P1_22, P1_21, P1_20); // mosi, miso, sclk +WIZnetInterface eth(&spi, P0_2, P0_0); // spi, cs, reset + Serial pc(P1_13, P1_14); // tx, rx +#else + Serial pc(USBTX,USBRX); +#endif + +#ifndef USE_DHCP +// for static IP setting +const char * IP_Addr = "192.168.0.120"; +const char * IP_Subnet = "255.255.255.0"; +const char * IP_Gateway = "192.168.0.1"; +#endif + + +void uart_thread(void const *args) { + int i = 0; + + while (true) { + printf("%d", i++); + Thread::wait(2000); + } +} + + +int main() +{ + uint8_t mac[6]; + + Thread thread(uart_thread); + + mbed_mac_address((char *)mac); // using the MAC address in LPC11U24 or LPC1178 + mac[0] = 0x00; mac[1] = 0x08; mac[2] = 0xDC; mac[3] = 0x00; mac[4] = 0x00; mac[5] = 0x00; +// you can alo use WIZ550io's MAC address by enabling "USE_WIZ550IO_MAC" in wiznet.h + + pc.printf("Start\n"); + #ifdef USE_DHCP + int ret = eth.init(mac); //Use DHCP + #else + int ret = eth.init(mac, IP_Addr, IP_Subnet, IP_Gateway); // static + #endif + + if (!ret) { + pc.printf("Initialized, MAC: %s\n", eth.getMACAddress()); + } else { + pc.printf("Error eth.init() - ret = %d\n", ret); + return -1; + } + + ret = eth.connect(); + if (!ret) { + pc.printf("IP: %s, MASK: %s, GW: %s\n", + eth.getIPAddress(), eth.getNetworkMask(), eth.getGateway()); + } else { + pc.printf("Error eth.connect() - ret = %d\n", ret); + return -1; + } + + TCPSocketServer server; + server.bind(ECHO_SERVER_PORT); + server.listen(); + + while (true) { + pc.printf("\nWait for new connection...\n"); + TCPSocketConnection client; + server.accept(client); + client.set_blocking(false, 10000); // Timeout after (10)s + + pc.printf("Connection from: %s\n", client.get_address()); + char buffer[256]; + while (true) { + int n = client.receive(buffer, sizeof(buffer)); + if (n <= 0) break; + + client.send_all(buffer, n); + if (n <= 0) break; + } + + client.close(); + } +}