fang chen / Mbed OS mdot_two_way

test _oliver

Dependencies:   libmDot-mbed5

Diff: README.md

Revision:
4:0fd5e5e121ea
Parent:
3:ac5101a47080
--- a/README.md	Tue Jan 03 17:25:01 2017 +0000
+++ b/README.md	Wed Jan 04 13:45:49 2017 +0000
@@ -1,6 +1,6 @@
 # Two way data using Multitech mDot
 
-Only builds with ARMCC, not with GCC. Demonstrates two-way data over LoRaWAN using Multitech mDot.
+Demonstrates two-way data over LoRaWAN using Multitech mDot.
 
 1. Triggers transmission when D6 goes high - this is the special wake-up pin on the mDot. Short D6 to test quickly.
 2. The RX window is used to toggle D2. If 0x00 is received the pin goes high, if 0x01 is received the pin goes low (as the LEDs are inverted on the break-out board).