![](/media/cache/profiles/a53d1388191884b75c48bebb18709bfb.50x50_q85.jpg)
demo sample to drive PCU9955 and PCA9629
Dependencies: mbed I2C_slaves PCU9669 parallel_bus
Fork of mini_board_PCU9669 by
What is this?
This is a sample code to operate PCU9955 (16ch constant-current LED controller) and PCA9629 (intelligent stepper motor controller) through PCU9669 (3 channels (UltraFast mode * 2ch, FastModePlus *1ch) I2C bus controller).
This demo is written based on mini_board_PCU9669 sample code library and its API.
http://mbed.org/users/nxp_ip/code/mini_board_PCU9669/
Demo will shows how the LED controllers and stepper motor controllers works.
It uses a mini_board_PCU9669 board with mbed, 8 of PCU9955s and 5 PCA9629s.
Demo setup
(left-top: PCU9955 boards, left-bottom: mini-board PCU9669 with mbed, right: PCA9629 x5 board)
Board connections and device addresses
Reference:
User manual of PCU9669 demo board: Mini board PCU9669
http://www.nxp.com/documents/user_manual/UM10580.pdf
sample code : mbed programs
Import programmini_board_PCU9669
mini board PCU9669 (and PCA9665) sample code
Import programPCA9955_Hello
PCA9955 16 channel current drive(sink) LED driver sample code
Import programPCA9955_simple
very simple sample code for PCA9955 (16 channel current control LED driver)
Import programPCA9629_Hello
Sample code for PCA9629 operation
device infomation
PCU9669 (Parallel bus to 1 channel Fm+ and 2 channel UFm I2C-bus controller)
PCU9955 (16-channel UFm I²C-bus 57 mA constant current LED driver)
PCA9955 (16-channel Fm+ I²C-bus 57 mA constant current LED driver)
PCU9629 (Fm+ I2C-bus stepper motor controller)
PCA9629_reg.h
- Committer:
- nxp_ip
- Date:
- 2012-10-26
- Revision:
- 20:a266fa588bd8
File content as of revision 20:a266fa588bd8:
/* A sample code for PCU9669 (and its family) operation sample * * @author Tedd OKANO, NXP Semiconductors * @version 0.5 * @date 13-Oct-2011 * * Released under the MIT License: http://mbed.org/license/mit * * An operation sample of PCU9669 I2C bus controller. * The mbed accesses the PCU9669's parallel port (8 bit address and 8 bit data) using bit-banging. * The bit-banging is poerformed by PortInOut function of mbed library. * * To make the code porting easier, all codes are partitioned into layers to abstract other parts. * The mbed specific parts are concentrated in lowest layer: "hardware_abs.*". * This module may need to be modified when porting. * * All other upper layers are writen in standard-C. * * base code is written from 05-Sep-2011 to 09-Sep-2011. * And demo code has been build on 11-Sep-2011. * Debug and code adjustment has been done on 08-Sep-2011. * Small sanitization for main.cpp. All mbed related codes are moved in to "hardware_abs.*". 13-Oct-2011 */ /** PCA9629 related definitions * * This header file was intended to define the PCA9629 registers but those details are not required in this application. * So this file only have I2C addresses definitions */ #ifndef __PCA9629_REG__ #define __PCA9629_REG__ /** @var PCA9629 I2C bus addresses */ typedef enum { MOT_ADDR0 = 0x40, MOT_ADDR1 = 0x42, MOT_ADDR2 = 0x44, MOT_ADDR3 = 0x46, MOT_ADDR4 = 0x48, MOT_ADDR5 = 0x4A, MOT_ADDR6 = 0x4C, MOT_ADDR7 = 0x4E, MOT_ADDR8 = 0x50, MOT_ADDR9 = 0x52 } pca9629_addr; #endif // __PCA9629_REG__