Revision 2:3574bf73abf5, committed 2015-03-19

Comitter:

nxp_ip

Date:

Thu Mar 19 10:34:33 2015 +0000

Parent:

1:32308cbf7e68

Commit message:

API document update

Changed in this revision

diff -r 32308cbf7e68 -r 3574bf73abf5 CompLedDvr.lib
--- a/CompLedDvr.lib	Wed Mar 04 08:37:34 2015 +0000
+++ b/CompLedDvr.lib	Thu Mar 19 10:34:33 2015 +0000
@@ -1,1 +1,1 @@
-http://developer.mbed.org/users/nxp_ip/code/CompLedDvr/#a0e4342d3b3d
+http://developer.mbed.org/users/nxp_ip/code/CompLedDvr/#8a0aa36b236c

diff -r 32308cbf7e68 -r 3574bf73abf5 PCA9632.h
--- a/PCA9632.h	Wed Mar 04 08:37:34 2015 +0000
+++ b/PCA9632.h	Thu Mar 19 10:34:33 2015 +0000
@@ -27,11 +27,11 @@
  *
  *  @class   PCA9632
  *
- *  This is a driver code for the PCA9632 is an I2C-bus controlled 4-bit LED driver 
- *  optimized for Red/Green/Blue/Amber (RGBA) color mixing applications. In Individual 
- *  brightness control mode, each LED output has its own 8-bit resolution (256 steps) 
- *  fixed frequency Individual PWM controller that operates at 1.5625 kHz with a duty 
- *  cycle that is adjustable from 0 % to 99.6 % to allow the LED to be set to a specific 
+ *  This is a driver code for the PCA9632 is an I2C-bus controlled 4-bit LED driver
+ *  optimized for Red/Green/Blue/Amber (RGBA) color mixing applications. In Individual
+ *  brightness control mode, each LED output has its own 8-bit resolution (256 steps)
+ *  fixed frequency Individual PWM controller that operates at 1.5625 kHz with a duty
+ *  cycle that is adjustable from 0 % to 99.6 % to allow the LED to be set to a specific
  *  brightness value.
  *  This class provides interface for PCA9632 operation and accessing its registers.
  *  Detail information is available on next URL.
@@ -41,10 +41,10 @@
  *  @code
  *  #include "mbed.h"
  *  #include "PCA9632.h"
- *  
+ *
  *  PCA9632     led_cntlr( p28, p27, 0xC4 );    //  SDA, SCL, Slave_address(option)
  *  LedPwmOut   led( led_cntlr, L0 );           //  for LED0 pin
- *  
+ *
  *  int main()
  *  {
  *      //
@@ -57,9 +57,9 @@
  *      //  2nd sample is using PCA9632 class function.
  *      //    the 'pwm()' function takes LED channel number and duty-ratio value
  *      //
- *  
+ *
  *      while ( 1 ) {
- *          
+ *
  *          //
  *          //  1st sample is using LedPwmOut API.
  *          //  PWM control via LedPwmOut
@@ -70,7 +70,7 @@
  *                  wait( 0.1 );
  *              }
  *          }
- *  
+ *
  *          //
  *          //  2nd sample is using PCA9632 class function.
  *          //  PWM control by device class function call
@@ -89,13 +89,32 @@
 {
 public:
 
-    /** Name of the PCA9632 registers */
+#if DOXYGEN_ONLY
+    /** PCA9626 pin names high-level API i.e. LedPwmOut */
+    typedef enum {
+        L0,            /**< LED0 pin                               */
+        L1,            /**< LED2 pin                               */
+        L2,            /**< LED2 pin                               */
+        L3,            /**< LED2 pin                               */
+        L_NC = ~0x0L   /**< for when the pin is left no-connection */
+    } LedPinName;
+#endif // DOXYGEN_ONLY
+
+    /** Name of the PCA9632 registers (for direct register access) */
     enum command_reg {
-        MODE1,   MODE2,
-        PWM0,    PWM1,    PWM2,    PWM3,
-        GRPPWM,  GRPFREQ,
-        LEDOUT,
-        SUBADR1, SUBADR2, SUBADR3, ALLCALLADR,
+        MODE1,      /**< MODE1 register      */
+        MODE2,      /**< MODE2 register      */
+        PWM0,       /**< PWM0 register       */
+        PWM1,       /**< PWM1 register       */
+        PWM2,       /**< PWM2 register       */
+        PWM3,       /**< PWM3 register       */
+        GRPPWM,     /**< GRPPWM register     */
+        GRPFREQ,    /**< GRPFREQ register    */
+        LEDOUT,     /**< LEDOUT register    */
+        SUBADR1,    /**< SUBADR1 register    */
+        SUBADR2,    /**< SUBADR2 register    */
+        SUBADR3,    /**< SUBADR3 register    */
+        ALLCALLADR, /**< ALLCALLADR register */
 
         REGISTER_START          = MODE1,
         PWM_REGISTER_START      = PWM0,
@@ -155,29 +174,29 @@
      *
      * @param reg_addr  Register address
      * @param data      Value for setting into the register
-     */    
+     */
     void    write( char reg_addr, char data );
 
     /** Register write (multiple bytes) : Low level access to device register
      *
      * @param data      Pointer to an array. First 1 byte should be the writing start register address
      * @param length    Length of data
-     */    
+     */
     void    write( char *data, int length );
- 
+
     /** Register read (single byte) : Low level access to device register
      *
      * @param reg_addr  Register address
      * @return          Read value from register
-     */    
+     */
     char    read( char reg_addr );
-    
+
     /** Register write (multiple bytes) : Low level access to device register
      *
      * @param reg_addr  Register address
      * @param data      Pointer to an array. The values are stored in this array.
      * @param length    Length of data
-     */    
+     */
 
     void    read( char reg_addr, char *data, int length );