![](/media/cache/profiles/94aef38441efa3380a3bed3faf1f9d5d.50x50_q85.jpg)
This program is porting rosserial_arduino for mbed http://www.ros.org/wiki/rosserial_arduino This program supported the revision of 169 of rosserial. This program contains an example.
Dependencies: rosserial_mbed_lib mbed Servo
examples/IrRanger.cpp
- Committer:
- nucho
- Date:
- 2011-08-19
- Revision:
- 0:06fc856e99ca
File content as of revision 0:06fc856e99ca:
//#define COMPILE_IRRANGER_CODE_ROSSERIAL #ifdef COMPILE_IRRANGER_CODE_ROSSERIAL /* * rosserial IR Ranger Example * * This example is calibrated for the Sharp GP2D120XJ00F. */ #include <ros.h> #include <ros/time.h> #include <sensor_msgs/Range.h> ros::NodeHandle nh; sensor_msgs::Range range_msg; ros::Publisher pub_range( "range_data", &range_msg); PinName analog_pin = p20; unsigned long range_timer; /* * getRange() - samples the analog input from the ranger * and converts it into meters. */ float getRange(PinName pin_num) { int sample; // Get data sample = AnalogIn(pin_num).read_u16()/4; // if the ADC reading is too low, // then we are really far away from anything if (sample < 10) return 254; // max range // Magic numbers to get cm sample= 1309/(sample-3); return (sample - 1)/100; //convert to meters } char frameid[] = "/ir_ranger"; Timer t; int main() { t.start(); nh.initNode(); nh.advertise(pub_range); range_msg.radiation_type = sensor_msgs::Range::INFRARED; range_msg.header.frame_id = frameid; range_msg.field_of_view = 0.01; range_msg.min_range = 0.03; range_msg.max_range = 0.4; while (1) { // publish the range value every 50 milliseconds // since it takes that long for the sensor to stabilize if ( (t.read_ms()-range_timer) > 50) { range_msg.range = getRange(analog_pin); range_msg.header.stamp = nh.now(); pub_range.publish(&range_msg); range_timer = t.read_ms() + 50; } nh.spinOnce(); } } #endif