Modified example with AT command traces for AT%MEAS, AT%PCONI and AT%CGEQOS. Loading times calculated for each cloud transfer
Dependencies: FXOS8700CQ MODSERIAL mbed
Fork of Avnet_ATT_Cellular_IOT by
Diff: config_me.h
- Revision:
- 82:340a51ed8760
- Parent:
- 69:5a3414cc7531
diff -r f236ef0ee0c5 -r 340a51ed8760 config_me.h --- a/config_me.h Thu Nov 17 18:21:52 2016 +0000 +++ b/config_me.h Thu Dec 14 00:23:22 2017 +0000 @@ -26,10 +26,10 @@ // This is the server's base URL name. Example "www.google.com" // Note that when you Fork a FLOW, it will typically assign either // "run-east.att.io" or "run-west.att.io", so be sure to check this. -static const char * MY_SERVER_URL = "run-west.att.io"; +static const char * MY_SERVER_URL = "run-east.att.io"; // These are FLOW fields from the Endpoints tab: -#define FLOW_BASE_URL "/1e464b19cdcde/774c88d68202/86694923d5bf28a/in/flow" +#define FLOW_BASE_URL "/05f25477b22e4/5d78886087e3/ea2353170171bb0/in/flow" #define FLOW_INPUT_NAME "/climate" // Unless you want to use a different protocol, this field should be left as is: @@ -39,7 +39,7 @@ // If you only have one devive there then you can just leave this as is. // Once your FLOW device has been initialized (Virtual Device Initialize clicked), // the Virtual Device will show up in M2X. This is its "DEVICE SERIAL" field -#define FLOW_DEVICE_NAME "vstarterkit001" +#define FLOW_DEVICE_NAME "starterkit001" // This constant defines how often sensors are read and sent up to FLOW #define SENSOR_UPDATE_INTERVAL_MS 5000; //5 seconds @@ -56,7 +56,7 @@ #define TEMP_HUMIDITY_ACCELEROMETER_GPS 3 #define TEMP_HUMIDITY_ACCELEROMETER_PMODSENSORS 4 #define TEMP_HUMIDITY_ACCELEROMETER_PMODSENSORS_VIRTUALSENSORS 5 -static int iSensorsToReport = TEMP_HUMIDITY_ACCELEROMETER; //modify this to change your selection +static int iSensorsToReport = TEMP_HUMIDITY_ONLY; //modify this to change your selection // This is the APN name for the cellular network, you will need to change this, check the instructions included with your SIM card kit: static const char * MY_APN_STR = "m2m.com.attz";