Quick hack to make NSX-39 (Poke-Miku) USB MIDI device to speak "mbed" from mbed which acts as an USB host.

Dependencies:   FatFileSystem mbed

Fork of MIDI_BlueUSB by Radio Junk Box

Description of the project

This is quick hack to control Poke-miku (NSX-39) from mbed. The mbed acts as an USB host and controls USB MIDI device NSX-39. It speaks "mbed" if you send "s¥n" from virtual USB serial (connected to PC or Mac) or push SW connected to p21. It plays MIDI file "test.mid" on local file-system if you push SW connected to p22. You can find files that I have tested at the bottom. The standard MIDI file support is still preliminary. See TestShell.cpp for the hack. This program is derived from MIDI_BlueUSB (http://mbed.org/users/radiojunkbox/code/MIDI_BlueUSB/) by Radio Junk Box.

ポケミク(NSX-39)を無改造のままmbedから鳴らせるようにしてみました。mbedがUSB hostになって、USB MIDIデバイスのポケミクを鳴らします。mbedのバーチャルシリアル(USBシリアル)にPCからs\nを送るか、p21につないだスイッチを押すとmbedとしゃべります。p22につないだスイッチを押すと、ローカルファイルシステム(.binと同じ場所)に保存した test.mid を再生します。試したファイルは下にある test1.mid と test2.mid です。MIDIファイルのサポートはまだまだ完全とはいえません。

tested MIDI files

Video: Poke-miku speaks `mbed'

Utils.h

Committer:
non
Date:
2014-04-29
Revision:
4:cd0d8ce967d8
Parent:
0:79620c558b0c

File content as of revision 4:cd0d8ce967d8:


typedef unsigned char u8;
typedef unsigned short u16;
typedef unsigned long u32;

void DelayMS(int ms);

void printfBytes(const char* label,const u8* data, int len);
void printHex(const u8* d, int len);

#ifndef min
#define min(_a,_b) ((_a) < (_b) ? (_a) : (_b))
#endif

inline int LE16(const u8* d)
{
    return d[0] | (d[1] << 8);
}

inline u32 BE32(const u8* d)
{
    return (d[0] << 24) | (d[1] << 16) | (d[2] << 8) | d[3];
}

inline void BE32(u32 n, u8* d)
{
    d[0] = (u8)(n >> 24);
    d[1] = (u8)(n >> 16);
    d[2] = (u8)(n >> 8);
    d[3] = (u8)n;
}

inline void BE16(u32 n, u8* d)
{
    d[0] = (u8)(n >> 8);
    d[1] = (u8)n;
}