Quick hack to make NSX-39 (Poke-Miku) USB MIDI device to speak "mbed" from mbed which acts as an USB host.
Dependencies: FatFileSystem mbed
Fork of MIDI_BlueUSB by
Description of the project
This is quick hack to control Poke-miku (NSX-39) from mbed. The mbed acts as an USB host and controls USB MIDI device NSX-39. It speaks "mbed" if you send "s¥n" from virtual USB serial (connected to PC or Mac) or push SW connected to p21. It plays MIDI file "test.mid" on local file-system if you push SW connected to p22. You can find files that I have tested at the bottom. The standard MIDI file support is still preliminary. See TestShell.cpp for the hack. This program is derived from MIDI_BlueUSB (http://mbed.org/users/radiojunkbox/code/MIDI_BlueUSB/) by Radio Junk Box.
ポケミク(NSX-39)を無改造のままmbedから鳴らせるようにしてみました。mbedがUSB hostになって、USB MIDIデバイスのポケミクを鳴らします。mbedのバーチャルシリアル(USBシリアル)にPCからs\nを送るか、p21につないだスイッチを押すとmbedとしゃべります。p22につないだスイッチを押すと、ローカルファイルシステム(.binと同じ場所)に保存した test.mid を再生します。試したファイルは下にある test1.mid と test2.mid です。MIDIファイルのサポートはまだまだ完全とはいえません。
tested MIDI files
Video: Poke-miku speaks `mbed'
Utils.h
- Committer:
- non
- Date:
- 2014-04-27
- Revision:
- 3:31fbce33c25b
- Parent:
- 0:79620c558b0c
File content as of revision 3:31fbce33c25b:
typedef unsigned char u8; typedef unsigned short u16; typedef unsigned long u32; void DelayMS(int ms); void printfBytes(const char* label,const u8* data, int len); void printHex(const u8* d, int len); #ifndef min #define min(_a,_b) ((_a) < (_b) ? (_a) : (_b)) #endif inline int LE16(const u8* d) { return d[0] | (d[1] << 8); } inline u32 BE32(const u8* d) { return (d[0] << 24) | (d[1] << 16) | (d[2] << 8) | d[3]; } inline void BE32(u32 n, u8* d) { d[0] = (u8)(n >> 24); d[1] = (u8)(n >> 16); d[2] = (u8)(n >> 8); d[3] = (u8)n; } inline void BE16(u32 n, u8* d) { d[0] = (u8)(n >> 8); d[1] = (u8)n; }