Quick hack to make NSX-39 (Poke-Miku) USB MIDI device to speak "mbed" from mbed which acts as an USB host.

Dependencies:   FatFileSystem mbed

Fork of MIDI_BlueUSB by Radio Junk Box

Description of the project

This is quick hack to control Poke-miku (NSX-39) from mbed. The mbed acts as an USB host and controls USB MIDI device NSX-39. It speaks "mbed" if you send "s¥n" from virtual USB serial (connected to PC or Mac) or push SW connected to p21. It plays MIDI file "test.mid" on local file-system if you push SW connected to p22. You can find files that I have tested at the bottom. The standard MIDI file support is still preliminary. See TestShell.cpp for the hack. This program is derived from MIDI_BlueUSB (http://mbed.org/users/radiojunkbox/code/MIDI_BlueUSB/) by Radio Junk Box.

ポケミク(NSX-39)を無改造のままmbedから鳴らせるようにしてみました。mbedがUSB hostになって、USB MIDIデバイスのポケミクを鳴らします。mbedのバーチャルシリアル(USBシリアル)にPCからs\nを送るか、p21につないだスイッチを押すとmbedとしゃべります。p22につないだスイッチを押すと、ローカルファイルシステム(.binと同じ場所)に保存した test.mid を再生します。試したファイルは下にある test1.mid と test2.mid です。MIDIファイルのサポートはまだまだ完全とはいえません。

tested MIDI files

Video: Poke-miku speaks `mbed'

Revision:
0:79620c558b0c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Utils.h	Fri May 11 10:05:40 2012 +0000
@@ -0,0 +1,37 @@
+
+typedef unsigned char u8;
+typedef unsigned short u16;
+typedef unsigned long u32;
+
+void DelayMS(int ms);
+
+void printfBytes(const char* label,const u8* data, int len);
+void printHex(const u8* d, int len);
+
+#ifndef min
+#define min(_a,_b) ((_a) < (_b) ? (_a) : (_b))
+#endif
+
+inline int LE16(const u8* d)
+{
+    return d[0] | (d[1] << 8);
+}
+
+inline u32 BE32(const u8* d)
+{
+    return (d[0] << 24) | (d[1] << 16) | (d[2] << 8) | d[3];
+}
+
+inline void BE32(u32 n, u8* d)
+{
+    d[0] = (u8)(n >> 24);
+    d[1] = (u8)(n >> 16);
+    d[2] = (u8)(n >> 8);
+    d[3] = (u8)n;
+}
+
+inline void BE16(u32 n, u8* d)
+{
+    d[0] = (u8)(n >> 8);
+    d[1] = (u8)n;
+}