Trying to log data from UM6 sensor with GPS receiver LS20031. I have two problems: - I can't log to file at a fast rate (<0.5s) without data values freezing to a fixed value. Print to pc screen it works fine. Ideally I would do this with an interrupt (e.g. ticker) so that the time of each reading is a fixed interval - I removed this as I thought this was causing the problem. - I want to record GPS lat and long. I have setup the GPS ground speed so I know the sensor are communicating. So I possibly havent set the config file to correctly interpet these two signals.
Fork of UM6_IMU_AHRS_2012 by
Auto generated API documentation and code listings for UM6_IMU_AHRS_edit_NJE
Code
ChangeLog.c [code] | |
example1.cpp [code] | |
example2.cpp [code] | |
example3a.cpp [code] | |
example3b.cpp [code] | |
example_dma.cpp [code] | |
FLUSH.cpp [code] | |
GETC.cpp [code] | |
INIT.cpp [code] | |
ISR_RX.cpp [code] | |
ISR_TX.cpp [code] | |
MACROS.h [code] | |
main.cpp [code] | |
MODSERIAL.cpp [code] | |
MODSERIAL.h [code] | |
MODSERIAL_IRQ_INFO.cpp [code] | |
PUTC.cpp [code] | |
RESIZE.cpp [code] | |
UM6_config.h [code] | |
UM6_usart.h [code] |