Diff: main.cpp

Revision:

2:178e089b3ce9

Parent:

1:5be2682710c6

Child:

3:1f92895432d2

diff -r 5be2682710c6 -r 178e089b3ce9 main.cpp
--- a/main.cpp	Wed Jan 19 23:53:19 2011 +0000
+++ b/main.cpp	Thu May 07 16:39:31 2015 +0000
@@ -13,20 +13,26 @@
 // The nRF24L01+ supports transfers from 1 to 32 bytes, but Sparkfun's
 //  "Nordic Serial Interface Board" (http://www.sparkfun.com/products/9019)
 //  only handles 4 byte transfers in the ATMega code.
-#define TRANSFER_SIZE   4
+#define TRANSFER_SIZE   32
 
     char txData[TRANSFER_SIZE], rxData[TRANSFER_SIZE];
     int txDataCnt = 0;
     int rxDataCnt = 0;
 
     my_nrf24l01p.powerUp();
+    
+    //Set Device
+    my_nrf24l01p.setTxAddress(0xE7E7E7E7E7,5);
+    //my_nrf24l01p.setRxAddress(0xE7E7E7E7E7,5);
+    my_nrf24l01p.setRfFrequency(2450);
+    my_nrf24l01p.setRfOutputPower(0);
 
     // Display the (default) setup of the nRF24L01+ chip
     pc.printf( "nRF24L01+ Frequency    : %d MHz\r\n",  my_nrf24l01p.getRfFrequency() );
     pc.printf( "nRF24L01+ Output power : %d dBm\r\n",  my_nrf24l01p.getRfOutputPower() );
     pc.printf( "nRF24L01+ Data Rate    : %d kbps\r\n", my_nrf24l01p.getAirDataRate() );
     pc.printf( "nRF24L01+ TX Address   : 0x%010llX\r\n", my_nrf24l01p.getTxAddress() );
-    pc.printf( "nRF24L01+ RX Address   : 0x%010llX\r\n", my_nrf24l01p.getRxAddress() );
+    pc.printf( "nRF24L01+ RX Address   : 0x%010llX\r\n", my_nrf24l01p.getRxAddress(0) );
 
     pc.printf( "Type keys to test transfers:\r\n  (transfers are grouped into %d characters)\r\n", TRANSFER_SIZE );
 
@@ -42,10 +48,13 @@
 
             // ...add it to the transmit buffer
             txData[txDataCnt++] = pc.getc();
+            
+            //pc.printf("lengte txData: %d \n\r", sizeof(txData));
+            //pc.printf("txData count: %d \n\r", txDataCnt);
 
             // If the transmit buffer is full
-            if ( txDataCnt >= sizeof( txData ) ) {
-
+            if ( txDataCnt >= sizeof(txData) ) {
+                //pc.printf("eerste if \n\r");
                 // Send the transmitbuffer via the nRF24L01+
                 my_nrf24l01p.write( NRF24L01P_PIPE_P0, txData, txDataCnt );
 
@@ -57,8 +66,8 @@
         }
 
         // If we've received anything in the nRF24L01+...
-        if ( my_nrf24l01p.readable() ) {
-
+        if ( my_nrf24l01p.readable(NRF24L01P_PIPE_P0) ) {
+            //pc.printf("tweede if \n\r");
             // ...read the data into the receive buffer
             rxDataCnt = my_nrf24l01p.read( NRF24L01P_PIPE_P0, rxData, sizeof( rxData ) );