File content as of revision 8:8d6f486e1a7d:

/*
 / _____)             _              | |
( (____  _____ ____ _| |_ _____  ____| |__
 \____ \| ___ |    (_   _) ___ |/ ___)  _ \
 _____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
    (C)2015 Semtech

Description: VT100 terminal support class

License: Revised BSD License, see LICENSE.TXT file include in the project

Maintainer: Miguel Luis and Gregory Cristian
*/
#ifndef __VT100_H__
#define __VT100_H__

#ifndef STRING_STACK_LIMIT
#define STRING_STACK_LIMIT    120
#endif

/**
 * Implements VT100 terminal commands support.
 * Implments also the same behaviour has RawSerial class. The only difference
 * is located in putc fucntion where writeable check is made befor sending the character.
 */
class VT100 : public SerialBase
{
public:
    enum TextAttributes
    {
        ATTR_OFF      = 0,
        BOLD          = 1,
        USCORE        = 4,
        BLINK         = 5,
        REVERSE       = 7,
        BOLD_OFF      = 21,
        USCORE_OFF    = 24,
        BLINK_OFF     = 25,
        REVERSE_OFF   = 27,
    };

    enum Colors
    {
        BLACK   = 0,
        RED     = 1,
        GREEN   = 2,
        BROWN   = 3,
        BLUE    = 4,
        MAGENTA = 5,
        CYAN    = 6,
        WHITE   = 7,
    };

    VT100( PinName tx, PinName rx ): SerialBase( tx, rx, 115200 )
    {
        // initializes terminal to "power-on" settings
        // ESC c
        this->printf( "\x1B\x63" );
    }
    
    void ClearScreen( uint8_t param )
    {
        // ESC [ Ps J
        // 0    Clear screen from cursor down
        // 1    Clear screen from cursor up
        // 2    Clear entire screen 
        this->printf( "\x1B[%dJ", param );
    }

    void ClearLine( uint8_t param )
    {
        // ESC [ Ps K
        // 0    Erase from the active position to the end of the line, inclusive (default)
        // 1    Erase from the start of the screen to the active position, inclusive
        // 2    Erase all of the line, inclusive
        this->printf( "\x1B[%dK", param );
    }

    void SetAttribute( uint8_t attr )
    {
        // ESC [ Ps;...;Ps m
        this->printf( "\x1B[%dm", attr );
    }

    void SetAttribute( uint8_t attr, uint8_t fgcolor, uint8_t bgcolor )
    {
        // ESC [ Ps;...;Ps m
        this->printf( "\x1B[%d;%d;%dm", attr, fgcolor + 30, bgcolor + 40 );
    }

    void SetCursorMode( uint8_t visible )
    {
        if( visible == true )
        {
            // ESC [ ? 25 h
            this->printf( "\x1B[?25h" );
        }
        else
        {
            // ESC [ ? 25 l
            this->printf( "\x1B[?25l" );
        }
    }

    void SetCursorPos( uint8_t line, uint8_t col )
    {
        // ESC [ Pl ; Pc H
        this->printf( "\x1B[%d;%dH", line, col );
    }

    void PutStringAt( uint8_t line, uint8_t col, const char *s )
    {
        this->SetCursorPos( line, col );
        this->printf( "%s", s );
    }

    void PutCharAt( uint8_t line, uint8_t col, uint8_t c )
    {
        this->SetCursorPos( line, col );
        this->printf( "%c", c );
    }

    void PutHexAt( uint8_t line, uint8_t col, uint16_t n )
    {
        this->SetCursorPos( line, col );
        this->printf( "%X", n );
    }

    void PutBoxDrawingChar( uint8_t c )
    {
        this->printf( "\x1B(0%c\x1b(B", c );
    }
    
    bool Readable( void )
    {
        return this->readable( );
    }
    
    uint8_t GetChar( void )
    {
        return this->getc( );
    }

    /*
     * RawSerial class implmentation copy.
     */
    /** Read a char from the serial port
     *
     * @returns The char read from the serial port
     */
    int getc( )
    {
        return _base_getc( );
    }

    /** Write a char to the serial port
     *
     * @param c The char to write
     *
     * @returns The written char or -1 if an error occured
     */
    int putc( int c )
    {
        while( this->writeable( ) != 1 );
        return _base_putc( c );
    }

    /** Write a string to the serial port
     *
     * @param str The string to write
     *
     * @returns 0 if the write succeeds, EOF for error
     */
    int puts( const char *str )
    {
        while( *str )
            putc( *str++ );
        return 0;
    }

    // Experimental support for printf in RawSerial. No Stream inheritance
    // means we can't call printf() directly, so we use sprintf() instead.
    // We only call malloc() for the sprintf() buffer if the buffer
    // length is above a certain threshold, otherwise we use just the stack.
    int printf( const char *format, ... )
    {
        std::va_list arg;
        va_start( arg, format );
        int len = vsnprintf( NULL, 0, format, arg );
        if( len < STRING_STACK_LIMIT )
        {
            char temp[STRING_STACK_LIMIT];
            vsprintf( temp, format, arg );
            puts( temp );
        }
        else
        {
            char *temp = new char[len + 1];
            vsprintf( temp, format, arg );
            puts( temp );
            delete[] temp;
        }
        va_end( arg );
        return len;
    }

private:
    
};

#endif // __VT100_H__