Diff: src/FT_GPU_Hal.cpp

Revision:

11:2f11d40f0f9a

Parent:

10:6a81aeca25e3

Child:

12:f0980f7a75ae

diff -r 6a81aeca25e3 -r 2f11d40f0f9a src/FT_GPU_Hal.cpp
--- a/src/FT_GPU_Hal.cpp	Mon Jul 23 12:22:23 2018 +0000
+++ b/src/FT_GPU_Hal.cpp	Thu Jun 18 13:14:32 2020 +0000
@@ -10,7 +10,7 @@
 #include "mbed.h"
 #include "FT_LCD_Type.h"
 //Serial pc(USBTX, USBRX);
-
+//Serial pc(SERIAL_TX,SERIAL_RX,115200);
 #define SPI_SPEED_START 10000000
 #define SPI_SPEED_AFTER 27000000
 
@@ -40,7 +40,7 @@
 
 ft_bool_t FT813::Bootup(void)
 {
-//    terminal.printf("Bootup() entered\r\n");
+   //pc.printf("Bootup() entered\r\n");//temp
     Open();
 
     BootupConfig();
@@ -60,7 +60,7 @@
 //  Sleep(30);
     
     /* Set the clk to external clock */
-    HostCommand(FT_GPU_EXTERNAL_OSC);
+    HostCommand(FT_GPU_INTERNAL_OSC);
     Sleep(10);
     
     /* Access address 0 to wake up the FT813 */
@@ -76,11 +76,11 @@
     Sleep(500);
     //Read Register ID to check if FT813 is ready.
     chipid = Rd8(REG_ID);
-//  chipid = Rd8(0x0C0000);
-//    printf("ID1: 0x%08X\n", chipid);
-    while(chipid != 0x7C)
-//    wait(1);
-//    printf("ID2: 0x%08X\n", chipid);
+  //chipid = Rd8(0x0C0000);
+    //pc.printf("ID1: 0x%08X\n", chipid);//temp
+    while(chipid != 0x7C) //раскомментить как заработает
+    wait(1);//tmp
+    //printf("ID2: 0x%08X\n", chipid);//tmp
 
     // Speed up
 //    _spi.frequency(50000000);           // 30 Mhz SPI clock DC
@@ -111,7 +111,7 @@
     Wr8(REG_SWIZZLE, DispSwizzle);
     DispPCLKPol = my_DispPCLKPol;
     Wr8(REG_PCLK_POL, DispPCLKPol);
-    Wr8(REG_CSPREAD, 0);
+    Wr8(REG_CSPREAD, 1); //поменяно для Riverdi 0 на 1
     DispPCLK = my_DispPCLK;
     Wr8(REG_PCLK, DispPCLK);    // After this display is visible on the LCD
 
@@ -133,7 +133,7 @@
     /* Touch configuration - configure the resistance value to 1200 */
     /* This value is specific to customer requirement and derived by experiment */
 //    Wr16(REG_TOUCH_RZTHRESH,2400);
-    Wr16(REG_TOUCH_RZTHRESH, 0xFFFF);
+    Wr16(REG_TOUCH_RZTHRESH, 1800); //поменяно с 0xFFFF на 1800
 }
 
 /* API to initialize the SPI interface */