Revision 0:7b877196b84a, committed 2018-03-20

Comitter:

nikhilchougule

Date:

Tue Mar 20 13:12:47 2018 +0000

Commit message:

SleepMonitoringSystem

Changed in this revision

diff -r 000000000000 -r 7b877196b84a .gitignore
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/.gitignore	Tue Mar 20 13:12:47 2018 +0000
@@ -0,0 +1,4 @@
+.build
+.mbed
+projectfiles
+*.py*

diff -r 000000000000 -r 7b877196b84a FXOS8700.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/FXOS8700.lib	Tue Mar 20 13:12:47 2018 +0000
@@ -0,0 +1,1 @@
+https://os.mbed.com/users/AswinSivakumar/code/FXOS8700/#df2167370234

diff -r 000000000000 -r 7b877196b84a README.md
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/README.md	Tue Mar 20 13:12:47 2018 +0000
@@ -0,0 +1,57 @@
+# Getting started with Blinky on mbed OS
+
+This guide reviews the steps required to get Blinky working on an mbed OS platform.
+
+Please install [mbed CLI](https://github.com/ARMmbed/mbed-cli#installing-mbed-cli).
+
+## Import the example application
+
+From the command-line, import the example:
+
+```
+mbed import mbed-os-example-blinky
+cd mbed-os-example-blinky
+```
+
+### Now compile
+
+Invoke `mbed compile`, and specify the name of your platform and your favorite toolchain (`GCC_ARM`, `ARM`, `IAR`). For example, for the ARM Compiler 5:
+
+```
+mbed compile -m K64F -t ARM
+```
+
+Your PC may take a few minutes to compile your code. At the end, you see the following result:
+
+```
+[snip]
++----------------------------+-------+-------+------+
+| Module                     | .text | .data | .bss |
++----------------------------+-------+-------+------+
+| Misc                       | 13939 |    24 | 1372 |
+| core/hal                   | 16993 |    96 |  296 |
+| core/rtos                  |  7384 |    92 | 4204 |
+| features/FEATURE_IPV4      |    80 |     0 |  176 |
+| frameworks/greentea-client |  1830 |    60 |   44 |
+| frameworks/utest           |  2392 |   512 |  292 |
+| Subtotals                  | 42618 |   784 | 6384 |
++----------------------------+-------+-------+------+
+Allocated Heap: unknown
+Allocated Stack: unknown
+Total Static RAM memory (data + bss): 7168 bytes
+Total RAM memory (data + bss + heap + stack): 7168 bytes
+Total Flash memory (text + data + misc): 43402 bytes
+Image: .\.build\K64F\ARM\mbed-os-example-blinky.bin
+```
+
+### Program your board
+
+1. Connect your mbed device to the computer over USB.
+1. Copy the binary file to the mbed device.
+1. Press the reset button to start the program.
+
+The LED on your platform turns on and off.
+
+## Troubleshooting
+
+If you have problems, you can review the [documentation](https://os.mbed.com/docs/latest/tutorials/debugging.html) for suggestions on what could be wrong and how to fix it.

diff -r 000000000000 -r 7b877196b84a main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue Mar 20 13:12:47 2018 +0000
@@ -0,0 +1,35 @@
+#include "mbed.h"
+#include "FXOS8700.h"
+// Check out the full featured example application for interfacing to
+// the Accelerometer/Magnetometer device at the following URL
+// https://developer.mbed.org/users/trm/code/fxos8700cq_example//
+DigitalOut led1(LED_GREEN);
+// Initialize Serial port
+Serial pc(USBTX, USBRX);
+FXOS8700 accel(PTC11, PTC10);
+FXOS8700 mag(PTC11, PTC10);
+// main() runs in its own thread in the OS
+// (note the calls to Thread::wait below for delays)
+int main() {
+// Configure Accelerometer FXOS8700, Magnetometer FXOS8700
+accel.accel_config();
+mag.mag_config();
+float accel_data[3]; float accel_rms=0.0;
+float mag_data[3]; float mag_rms=0.0;
+//printf("Begin Data Acquisition from FXOS8700CQ sensor....\r\n\r\n");
+wait(1.5);
+while (1) {
+led1 = !led1;
+// Example data printing
+accel.acquire_accel_data_g(accel_data);
+accel_rms = sqrt(((accel_data[0]*accel_data[0])+(accel_data[1]*accel_data[1])+(accel_data[2]*accel_data[2]))/3);
+printf("%4.2f %4.2f %4.2f\n\r",accel_data[0],accel_data[1],accel_data[2]);
+wait(0.01);
+//mag.acquire_mag_data_uT(mag_data);
+//mag_rms = sqrt(((mag_data[0]*mag_data[0])+(mag_data[1]*mag_data[1])+(mag_data[2]*mag_data[2]))/3);
+//printf("Magnetometer \tX-Axis %4.2f \tY-Axis %4.2f \tZ-Axis %4.2f \tRMS %4.2f\n\n\r",mag_data[0],mag_data[1],mag_data[2],mag_rms);
+//wait(0.01);
+Thread::wait(500);
+}
+}
+

diff -r 000000000000 -r 7b877196b84a mbed-os.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os.lib	Tue Mar 20 13:12:47 2018 +0000
@@ -0,0 +1,1 @@
+https://github.com/ARMmbed/mbed-os/#569159b784f70feaa32ce226aaca896fb83452f7