Diff: main.cpp.orig

Revision:

21:7068b39d3006

Parent:

20:27f878df6d14

Parent:

18:ad4ae0caf337

Child:

24:e825e2b57d62

--- a/main.cpp.orig	Thu Sep 27 13:18:02 2012 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,177 +0,0 @@
-/* net_sms_test.cpp */
-/*
-Copyright (C) 2012 ARM Limited.
-
-Permission is hereby granted, free of charge, to any person obtaining a copy of
-this software and associated documentation files (the "Software"), to deal in
-the Software without restriction, including without limitation the rights to
-use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
-of the Software, and to permit persons to whom the Software is furnished to do
-so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
-*/
-
-#define __DEBUG__ 4 //Maximum verbosity
-#ifndef __MODULE__
-#define __MODULE__ "main.cpp"
-#endif
-
-#define MY_PHONE_NUMBER "+447717275049"
-
-#include "core/fwk.h"
-#include "mbed.h"
-#include "rtos.h"
-#include "VodafoneUSBModem.h"
-
-#include <string>
-
-extern "C" void HardFault_Handler() {
-    error("Hard Fault!\n");
-}
-
-DigitalOut  led1(LED1);                     // LED 1 is used to show the state of the door. ON is door open, and OFF is door close.
-DigitalOut  led2(LED2);
-DigitalOut  led3(LED3);                     // LED 3 is use to indicate if the relay is being switched on to open the door
-DigitalOut  led4(LED4);
-DigitalOut  doorContactorRelay(p5);         // create a digital pin object to control the door contactor relay
-DigitalIn   doorProximitySwitch(p6);        // create a digital pin object to sense door position proximity switch, this works in reverse
-                                            // the switch senses positive when the door is closed - need to be sure when it's closed! :-)
-bool        openTheDoor = false;            // create a state variable which is set to indicate the mbed should open the door
-                                            // this variable will be used hold the latch open until it knows the door has been open.
-int read_digital(void) {
-    DigitalIn mydigital(p6);
-    return(mydigital.read());
-}
-
-void test(void const*) {
-  VodafoneUSBModem connectionManager;                     // create a connection manager object
-
-  DBG("Hello world and Vodafone K3770 test program!");
-    
-  connectionManager.sendSM(MY_PHONE_NUMBER, "Hello from mbed door controller:)");
-
-  char num[17];                                           // create a buffer to hold the telephone number in
-  char msg[160];                                          // create a buffer to hold the text message in
-  size_t count;
-
-  while(true)
-  {
-    
-    // if this state variable has been set I need to keep the doorContactor on until the door is open
-    if ((openTheDoor) || (doorProximitySwitch.read() == 0))
-    {
-        
-        doorContactorRelay = 0;                             // door must be open now so switch relay off.
-        openTheDoor = false;                                // the door is open now so set it to false.
-        led3 = 0;                                           // switch the LED light off to indicate I'm switching the relay off
-
-    }
-    
-    // check the state of the door and switch the LED light to 'ON' for door open and 'OFF' for door closed.
-    //if (doorProximitySwitch.read() == 0)
-    if (read_digital() == 0)
-    {
-        DBG("The door proximity switch is: %d so I think it's open", doorProximitySwitch.read() );
-        led1 = 1;
-    }
-    else
-    {
-        DBG("The door proximity switch is: %d so I think it's closed", doorProximitySwitch.read() );
-        led1 = 0;
-    }
-    
-    
- 
-    int ret = connectionManager.getSMCount(&count);         // check to see if there is an incoming SMS message
-    if(ret)
-    {
-      WARN("getSMCount returned %d", ret);
-      Thread::wait(125);
-      continue;
-    }
-        
-    DBG("The SMS count is now at: %d for this modem", count);
-    if( count > 0)                                          // if there are messages in the mailbox start pulling them off the queue
-    {
-      DBG("%d SMS to read", count);
-      ret = connectionManager.getSM(num, msg, 160);
-    
-      if(ret)
-      {
-        WARN("getSM returned %d", ret);
-        Thread::wait(125);
-        continue;
-      }
-
-      DBG("The message is from number: %s and the message is: \"%s\"", num, msg);
-      
-      if (strcmp (msg, "open") ==0) 
-      {
-        DBG("The SMS message indicates I should open the door");
-        
-        // check the door is not already open if it is do nothing and send a warning back to the sender
-        // for this door the switch 'true' then its closed - we have to have an active signal to show it's securely closed
-
-        if ( doorProximitySwitch.read() == 0)
-        {
-            DBG("The door is already open - so I'll do nothing");
-            connectionManager.sendSM(num, " WARNING - The door is already open sir! ");
-        }
-        else
-        {
-            doorContactorRelay = 1;
-            openTheDoor = true;     // set the state vairable to let the door contoller know it needs to open the door
-            led3 = 1;
-            DBG("The relay has been activated to open the door");
-            connectionManager.sendSM(num, " Door open sir... Welcome home! " );
-        }
-      } 
-      else 
-      {
-        DBG("The SMS message is not recognized");
-        connectionManager.sendSM(num, " Wrong password sir... Try 'open' and I'll open! ;-) ");
-      }
-      
-        
-      
-    }
-    Thread::wait(500);
-  }
-
-}
-
-void keepAlive(void const*) {
-   while(1)
-   {
-     led2=!led2;
-     Thread::wait(500);
-   }
-}
-
-void tick()
-{
-  led4=!led4;
-}
-
-int main() {
-  Ticker t;
-  t.attach(tick,1);
-  DBG_INIT();
-  DBG_SET_SPEED(115200);
-
-  Thread testTask(test, NULL, osPriorityNormal, 1024*5);
-  keepAlive(NULL);
-
-    
-    return 0;
-}