Revision 0:e87aa4c49e95, committed 2019-06-04

Comitter:

phungductung

Date:

Tue Jun 04 21:51:46 2019 +0000

Commit message:

libray

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/AnalogIn.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGIN_H
+#define MBED_ANALOGIN_H
+
+#include "platform.h"
+
+#if DEVICE_ANALOGIN
+
+#include "analogin_api.h"
+
+namespace mbed {
+
+/** An analog input, used for reading the voltage on a pin
+ *
+ * Example:
+ * @code
+ * // Print messages when the AnalogIn is greater than 50%
+ *
+ * #include "mbed.h"
+ *
+ * AnalogIn temperature(p20);
+ *
+ * int main() {
+ *     while(1) {
+ *         if(temperature > 0.5) {
+ *             printf("Too hot! (%f)", temperature.read());
+ *         }
+ *     }
+ * }
+ * @endcode
+ */
+class AnalogIn {
+
+public:
+
+    /** Create an AnalogIn, connected to the specified pin
+     *
+     * @param pin AnalogIn pin to connect to
+     * @param name (optional) A string to identify the object
+     */
+    AnalogIn(PinName pin) {
+        analogin_init(&_adc, pin);
+    }
+
+    /** Read the input voltage, represented as a float in the range [0.0, 1.0]
+     *
+     * @returns A floating-point value representing the current input voltage, measured as a percentage
+     */
+    float read() {
+        return analogin_read(&_adc);
+    }
+
+    /** Read the input voltage, represented as an unsigned short in the range [0x0, 0xFFFF]
+     *
+     * @returns
+     *   16-bit unsigned short representing the current input voltage, normalised to a 16-bit value
+     */
+    unsigned short read_u16() {
+        return analogin_read_u16(&_adc);
+    }
+
+#ifdef MBED_OPERATORS
+    /** An operator shorthand for read()
+     *
+     * The float() operator can be used as a shorthand for read() to simplify common code sequences
+     *
+     * Example:
+     * @code
+     * float x = volume.read();
+     * float x = volume;
+     *
+     * if(volume.read() > 0.25) { ... }
+     * if(volume > 0.25) { ... }
+     * @endcode
+     */
+    operator float() {
+        return read();
+    }
+#endif
+
+protected:
+    analogin_t _adc;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/AnalogOut.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,121 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGOUT_H
+#define MBED_ANALOGOUT_H
+
+#include "platform.h"
+
+#if DEVICE_ANALOGOUT
+
+#include "analogout_api.h"
+
+namespace mbed {
+
+/** An analog output, used for setting the voltage on a pin
+ *
+ * Example:
+ * @code
+ * // Make a sawtooth output
+ *
+ * #include "mbed.h"
+ *
+ * AnalogOut tri(p18);
+ * int main() {
+ *     while(1) {
+ *         tri = tri + 0.01;
+ *         wait_us(1);
+ *         if(tri == 1) {
+ *             tri = 0;
+ *         }
+ *     }
+ * }
+ * @endcode
+ */
+class AnalogOut {
+
+public:
+
+    /** Create an AnalogOut connected to the specified pin
+     *
+     *  @param AnalogOut pin to connect to (18)
+     */
+    AnalogOut(PinName pin) {
+        analogout_init(&_dac, pin);
+    }
+
+    /** Set the output voltage, specified as a percentage (float)
+     *
+     *  @param value A floating-point value representing the output voltage,
+     *    specified as a percentage. The value should lie between
+     *    0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%).
+     *    Values outside this range will be saturated to 0.0f or 1.0f.
+     */
+    void write(float value) {
+        analogout_write(&_dac, value);
+    }
+
+    /** Set the output voltage, represented as an unsigned short in the range [0x0, 0xFFFF]
+     *
+     *  @param value 16-bit unsigned short representing the output voltage,
+     *            normalised to a 16-bit value (0x0000 = 0v, 0xFFFF = 3.3v)
+     */
+    void write_u16(unsigned short value) {
+        analogout_write_u16(&_dac, value);
+    }
+
+    /** Return the current output voltage setting, measured as a percentage (float)
+     *
+     *  @returns
+     *    A floating-point value representing the current voltage being output on the pin,
+     *    measured as a percentage. The returned value will lie between
+     *    0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%).
+     *
+     *  @note
+     *    This value may not match exactly the value set by a previous write().
+     */
+    float read() {
+        return analogout_read(&_dac);
+    }
+
+#ifdef MBED_OPERATORS
+    /** An operator shorthand for write()
+     */
+    AnalogOut& operator= (float percent) {
+        write(percent);
+        return *this;
+    }
+
+    AnalogOut& operator= (AnalogOut& rhs) {
+        write(rhs.read());
+        return *this;
+    }
+
+    /** An operator shorthand for read()
+     */
+    operator float() {
+        return read();
+    }
+#endif
+
+protected:
+    dac_t _dac;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/BusIn.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,98 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSIN_H
+#define MBED_BUSIN_H
+
+#include "platform.h"
+#include "DigitalIn.h"
+
+namespace mbed {
+
+/** A digital input bus, used for reading the state of a collection of pins
+ */
+class BusIn {
+
+public:
+    /* Group: Configuration Methods */
+
+    /** Create an BusIn, connected to the specified pins
+     *
+     * @param <n> DigitalIn pin to connect to bus bit <n> (p5-p30, NC)
+     *
+     * @note
+     *  It is only required to specify as many pin variables as is required
+     *  for the bus; the rest will default to NC (not connected)
+     */
+    BusIn(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+          PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+          PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+          PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+    BusIn(PinName pins[16]);
+
+    virtual ~BusIn();
+
+    /** Read the value of the input bus
+     *
+     *  @returns
+     *   An integer with each bit corresponding to the value read from the associated DigitalIn pin
+     */
+    int read();
+
+    /** Set the input pin mode
+     *
+     *  @param mode PullUp, PullDown, PullNone
+     */
+    void mode(PinMode pull);
+
+    /** Binary mask of bus pins connected to actual pins (not NC pins)
+     *  If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+     *
+     *  @returns
+     *    Binary mask of connected pins
+     */
+    int mask() {
+        return _nc_mask;
+    }
+
+#ifdef MBED_OPERATORS
+    /** A shorthand for read()
+     */
+    operator int();
+
+    /** Access to particular bit in random-iterator fashion
+     */
+    DigitalIn & operator[] (int index);
+#endif
+
+protected:
+    DigitalIn* _pin[16];
+
+    /** Mask of bus's NC pins
+     * If bit[n] is set to 1 - pin is connected
+     * if bit[n] is cleared - pin is not connected (NC)
+     */
+    int _nc_mask;
+
+    /* disallow copy constructor and assignment operators */
+private:
+    BusIn(const BusIn&);
+    BusIn & operator = (const BusIn&);
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/BusInOut.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,117 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSINOUT_H
+#define MBED_BUSINOUT_H
+
+#include "DigitalInOut.h"
+
+namespace mbed {
+
+/** A digital input output bus, used for setting the state of a collection of pins
+ */
+class BusInOut {
+
+public:
+
+    /** Create an BusInOut, connected to the specified pins
+     *
+     *  @param p<n> DigitalInOut pin to connect to bus bit p<n> (p5-p30, NC)
+     *
+     *  @note
+     *  It is only required to specify as many pin variables as is required
+     *  for the bus; the rest will default to NC (not connected)
+     */
+    BusInOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+             PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+             PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+             PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+    BusInOut(PinName pins[16]);
+
+    virtual ~BusInOut();
+
+    /* Group: Access Methods */
+
+    /** Write the value to the output bus
+     *
+     *  @param value An integer specifying a bit to write for every corresponding DigitalInOut pin
+     */
+    void write(int value);
+
+    /** Read the value currently output on the bus
+     *
+     *  @returns
+     *    An integer with each bit corresponding to associated DigitalInOut pin setting
+     */
+    int read();
+
+    /** Set as an output
+     */
+    void output();
+
+    /** Set as an input
+     */
+    void input();
+
+    /** Set the input pin mode
+     *
+     *  @param mode PullUp, PullDown, PullNone
+     */
+    void mode(PinMode pull);
+
+    /** Binary mask of bus pins connected to actual pins (not NC pins)
+     *  If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+     *
+     *  @returns
+     *    Binary mask of connected pins
+     */
+    int mask() {
+        return _nc_mask;
+    }
+
+#ifdef MBED_OPERATORS
+     /** A shorthand for write()
+     */
+    BusInOut& operator= (int v);
+    BusInOut& operator= (BusInOut& rhs);
+
+    /** Access to particular bit in random-iterator fashion
+    */
+    DigitalInOut& operator[] (int index);
+
+    /** A shorthand for read()
+     */
+    operator int();
+#endif
+
+protected:
+    DigitalInOut* _pin[16];
+
+    /** Mask of bus's NC pins
+     * If bit[n] is set to 1 - pin is connected
+     * if bit[n] is cleared - pin is not connected (NC)
+     */
+    int _nc_mask;
+
+    /* disallow copy constructor and assignment operators */
+private:
+    BusInOut(const BusInOut&);
+    BusInOut & operator = (const BusInOut&);
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/BusOut.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,101 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSOUT_H
+#define MBED_BUSOUT_H
+
+#include "DigitalOut.h"
+
+namespace mbed {
+
+/** A digital output bus, used for setting the state of a collection of pins
+ */
+class BusOut {
+
+public:
+
+    /** Create an BusOut, connected to the specified pins
+     *
+     *  @param p<n> DigitalOut pin to connect to bus bit <n> (p5-p30, NC)
+     *
+     *  @note
+     *  It is only required to specify as many pin variables as is required
+     *  for the bus; the rest will default to NC (not connected)
+     */
+    BusOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+           PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+           PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+           PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+    BusOut(PinName pins[16]);
+
+    virtual ~BusOut();
+
+    /** Write the value to the output bus
+     *
+     *  @param value An integer specifying a bit to write for every corresponding DigitalOut pin
+     */
+    void write(int value);
+
+    /** Read the value currently output on the bus
+     *
+     *  @returns
+     *    An integer with each bit corresponding to associated DigitalOut pin setting
+     */
+    int read();
+
+    /** Binary mask of bus pins connected to actual pins (not NC pins)
+     *  If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+     *
+     *  @returns
+     *    Binary mask of connected pins
+     */
+    int mask() {
+        return _nc_mask;
+    }
+
+#ifdef MBED_OPERATORS
+    /** A shorthand for write()
+     */
+    BusOut& operator= (int v);
+    BusOut& operator= (BusOut& rhs);
+
+    /** Access to particular bit in random-iterator fashion
+     */
+    DigitalOut& operator[] (int index);
+
+    /** A shorthand for read()
+     */
+    operator int();
+#endif
+
+protected:
+    DigitalOut* _pin[16];
+
+    /** Mask of bus's NC pins
+     * If bit[n] is set to 1 - pin is connected
+     * if bit[n] is cleared - pin is not connected (NC)
+     */
+    int _nc_mask;
+
+   /* disallow copy constructor and assignment operators */
+private:
+    BusOut(const BusOut&);
+    BusOut & operator = (const BusOut&);
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/CAN.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,243 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_H
+#define MBED_CAN_H
+
+#include "platform.h"
+
+#if DEVICE_CAN
+
+#include "can_api.h"
+#include "can_helper.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** CANMessage class
+ */
+class CANMessage : public CAN_Message {
+
+public:
+    /** Creates empty CAN message.
+     */
+    CANMessage() : CAN_Message() {
+        len    = 8;
+        type   = CANData;
+        format = CANStandard;
+        id     = 0;
+        memset(data, 0, 8);
+    }
+
+    /** Creates CAN message with specific content.
+     */
+    CANMessage(int _id, const char *_data, char _len = 8, CANType _type = CANData, CANFormat _format = CANStandard) {
+      len    = _len & 0xF;
+      type   = _type;
+      format = _format;
+      id     = _id;
+      memcpy(data, _data, _len);
+    }
+
+    /** Creates CAN remote message.
+     */
+    CANMessage(int _id, CANFormat _format = CANStandard) {
+      len    = 0;
+      type   = CANRemote;
+      format = _format;
+      id     = _id;
+      memset(data, 0, 8);
+    }
+};
+
+/** A can bus client, used for communicating with can devices
+ */
+class CAN {
+
+public:
+    /** Creates an CAN interface connected to specific pins.
+     *
+     *  @param rd read from transmitter
+     *  @param td transmit to transmitter
+     *
+     * Example:
+     * @code
+     * #include "mbed.h"
+     *
+     * Ticker ticker;
+     * DigitalOut led1(LED1);
+     * DigitalOut led2(LED2);
+     * CAN can1(p9, p10);
+     * CAN can2(p30, p29);
+     *
+     * char counter = 0;
+     *
+     * void send() {
+     *     if(can1.write(CANMessage(1337, &counter, 1))) {
+     *         printf("Message sent: %d\n", counter);
+     *         counter++;
+     *     }
+     *     led1 = !led1;
+     * }
+     *
+     * int main() {
+     *     ticker.attach(&send, 1);
+     *    CANMessage msg;
+     *     while(1) {
+     *         if(can2.read(msg)) {
+     *             printf("Message received: %d\n\n", msg.data[0]);
+     *             led2 = !led2;
+     *         }
+     *         wait(0.2);
+     *     }
+     * }
+     * @endcode
+     */
+    CAN(PinName rd, PinName td);
+    virtual ~CAN();
+
+    /** Set the frequency of the CAN interface
+     *
+     *  @param hz The bus frequency in hertz
+     *
+     *  @returns
+     *    1 if successful,
+     *    0 otherwise
+     */
+    int frequency(int hz);
+
+    /** Write a CANMessage to the bus.
+     *
+     *  @param msg The CANMessage to write.
+     *
+     *  @returns
+     *    0 if write failed,
+     *    1 if write was successful
+     */
+    int write(CANMessage msg);
+
+    /** Read a CANMessage from the bus.
+     *
+     *  @param msg A CANMessage to read to.
+     *  @param handle message filter handle (0 for any message)
+     *
+     *  @returns
+     *    0 if no message arrived,
+     *    1 if message arrived
+     */
+    int read(CANMessage &msg, int handle = 0);
+
+    /** Reset CAN interface.
+     *
+     * To use after error overflow.
+     */
+    void reset();
+
+    /** Puts or removes the CAN interface into silent monitoring mode
+     *
+     *  @param silent boolean indicating whether to go into silent mode or not
+     */
+    void monitor(bool silent);
+
+    enum Mode {
+        Reset = 0,
+        Normal,
+        Silent,
+        LocalTest,
+        GlobalTest,
+        SilentTest
+    };
+
+    /** Change CAN operation to the specified mode
+     *
+     *  @param mode The new operation mode (CAN::Normal, CAN::Silent, CAN::LocalTest, CAN::GlobalTest, CAN::SilentTest)
+     *
+     *  @returns
+     *    0 if mode change failed or unsupported,
+     *    1 if mode change was successful
+     */
+    int mode(Mode mode);
+
+    /** Filter out incomming messages
+     *
+     *  @param id the id to filter on
+     *  @param mask the mask applied to the id
+     *  @param format format to filter on (Default CANAny)
+     *  @param handle message filter handle (Optional)
+     *
+     *  @returns
+     *    0 if filter change failed or unsupported,
+     *    new filter handle if successful
+     */
+    int filter(unsigned int id, unsigned int mask, CANFormat format = CANAny, int handle = 0);
+
+    /** Returns number of read errors to detect read overflow errors.
+     */
+    unsigned char rderror();
+
+    /** Returns number of write errors to detect write overflow errors.
+     */
+    unsigned char tderror();
+
+    enum IrqType {
+        RxIrq = 0,
+        TxIrq,
+        EwIrq,
+        DoIrq,
+        WuIrq,
+        EpIrq,
+        AlIrq,
+        BeIrq,
+        IdIrq
+    };
+
+    /** Attach a function to call whenever a CAN frame received interrupt is
+     *  generated.
+     *
+     *  @param fptr A pointer to a void function, or 0 to set as none
+     *  @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, CAN::TxIrq for transmitted or aborted, CAN::EwIrq for error warning, CAN::DoIrq for data overrun, CAN::WuIrq for wake-up, CAN::EpIrq for error passive, CAN::AlIrq for arbitration lost, CAN::BeIrq for bus error)
+     */
+    void attach(void (*fptr)(void), IrqType type=RxIrq);
+
+   /** Attach a member function to call whenever a CAN frame received interrupt
+    *  is generated.
+    *
+    *  @param tptr pointer to the object to call the member function on
+    *  @param mptr pointer to the member function to be called
+    *  @param event Which CAN interrupt to attach the member function to (CAN::RxIrq for message received, TxIrq for transmitted or aborted, EwIrq for error warning, DoIrq for data overrun, WuIrq for wake-up, EpIrq for error passive, AlIrq for arbitration lost, BeIrq for bus error)
+    */
+   template<typename T>
+   void attach(T* tptr, void (T::*mptr)(void), IrqType type=RxIrq) {
+        if((mptr != NULL) && (tptr != NULL)) {
+            _irq[type].attach(tptr, mptr);
+            can_irq_set(&_can, (CanIrqType)type, 1);
+        }
+        else {
+            can_irq_set(&_can, (CanIrqType)type, 0);
+        }
+    }
+
+    static void _irq_handler(uint32_t id, CanIrqType type);
+
+protected:
+    can_t           _can;
+    FunctionPointer _irq[9];
+};
+
+} // namespace mbed
+
+#endif
+
+#endif    // MBED_CAN_H

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/CThunk.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,220 @@
+/* General C++ Object Thunking class
+ *
+ * - allows direct callbacks to non-static C++ class functions
+ * - keeps track for the corresponding class instance
+ * - supports an optional context parameter for the called function
+ * - ideally suited for class object receiving interrupts (NVIC_SetVector)
+ *
+ * Copyright (c) 2014-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef __CTHUNK_H__
+#define __CTHUNK_H__
+
+#define CTHUNK_ADDRESS 1
+
+#if (defined(__CORTEX_M3) || defined(__CORTEX_M4) || defined(__thumb2__)) && ! defined(__CORTEX_A9)
+#define CTHUNK_VARIABLES volatile uint32_t code[1]
+/**
+* CTHUNK disassembly for Cortex-M3/M4 (thumb2):
+* * ldm.w pc,{r0,r1,r2,pc}
+*
+* This instruction loads the arguments for the static thunking function to r0-r2, and
+* branches to that function by loading its address into PC.
+*
+* This is safe for both regular calling and interrupt calling, since it only touches scratch registers
+* which should be saved by the caller, and are automatically saved as part of the IRQ context switch.
+*/
+#define CTHUNK_ASSIGMENT m_thunk.code[0] = 0x8007E89F
+
+#elif defined(__CORTEX_M0PLUS) || defined(__CORTEX_M0) || defined(__CORTEX_A9)
+/*
+* CTHUNK disassembly for Cortex M0 (thumb):
+* * push {r0,r1,r2,r3,r4,lr} save touched registers and return address
+* * movs r4,#4 set up address to load arguments from (immediately following this code block) (1)
+* * add r4,pc set up address to load arguments from (immediately following this code block) (2)
+* * ldm r4!,{r0,r1,r2,r3} load arguments for static thunk function
+* * blx r3 call static thunk function
+* * pop {r0,r1,r2,r3,r4,pc} restore scratch registers and return from function
+*/
+#define CTHUNK_VARIABLES volatile uint32_t code[3]
+#define CTHUNK_ASSIGMENT do {                              \
+                             m_thunk.code[0] = 0x2404B51F; \
+                             m_thunk.code[1] = 0xCC0F447C; \
+                             m_thunk.code[2] = 0xBD1F4798; \
+                         } while (0)
+
+#else
+#error "Target is not currently suported."
+#endif
+
+/* IRQ/Exception compatible thunk entry function */
+typedef void (*CThunkEntry)(void);
+
+template<class T>
+class CThunk
+{
+    public:
+        typedef void (T::*CCallbackSimple)(void);
+        typedef void (T::*CCallback)(void* context);
+
+        inline CThunk(T *instance)
+        {
+            init(instance, NULL, NULL);
+        }
+
+        inline CThunk(T *instance, CCallback callback)
+        {
+            init(instance, callback, NULL);
+        }
+
+        ~CThunk() {
+
+        }
+
+        inline CThunk(T *instance, CCallbackSimple callback)
+        {
+            init(instance, (CCallback)callback, NULL);
+        }
+
+        inline CThunk(T &instance, CCallback callback)
+        {
+            init(instance, callback, NULL);
+        }
+
+        inline CThunk(T &instance, CCallbackSimple callback)
+        {
+            init(instance, (CCallback)callback, NULL);
+        }
+
+        inline CThunk(T &instance, CCallback callback, void* context)
+        {
+            init(instance, callback, context);
+        }
+
+        inline void callback(CCallback callback)
+        {
+            m_callback = callback;
+        }
+
+        inline void callback(CCallbackSimple callback)
+        {
+            m_callback = (CCallback)callback;
+        }
+
+        inline void context(void* context)
+        {
+            m_thunk.context = (uint32_t)context;
+        }
+
+        inline void context(uint32_t context)
+        {
+            m_thunk.context = context;
+        }
+        
+        inline uint32_t entry(void)
+        {
+            return (((uint32_t)&m_thunk)|CTHUNK_ADDRESS);
+        }
+
+        /* get thunk entry point for connecting rhunk to an IRQ table */
+        inline operator CThunkEntry(void)
+        {
+            return (CThunkEntry)entry();
+        }
+
+        /* get thunk entry point for connecting rhunk to an IRQ table */
+        inline operator uint32_t(void)
+        {
+            return entry();
+        }
+
+        /* simple test function */
+        inline void call(void)
+        {
+            (((CThunkEntry)(entry()))());
+        }
+
+    private:
+        T* m_instance;
+        volatile CCallback m_callback;
+
+// TODO: this needs proper fix, to refactor toolchain header file and all its use
+// PACKED there is not defined properly for IAR
+#if defined (__ICCARM__)
+        typedef __packed struct
+        {
+            CTHUNK_VARIABLES;
+            volatile uint32_t instance;
+            volatile uint32_t context;
+            volatile uint32_t callback;
+            volatile uint32_t trampoline;
+        }  CThunkTrampoline;
+#else
+        typedef struct
+        {
+            CTHUNK_VARIABLES;
+            volatile uint32_t instance;
+            volatile uint32_t context;
+            volatile uint32_t callback;
+            volatile uint32_t trampoline;
+        } __attribute__((__packed__)) CThunkTrampoline;
+#endif
+
+        static void trampoline(T* instance, void* context, CCallback* callback)
+        {
+            if(instance && *callback) {
+                (static_cast<T*>(instance)->**callback)(context);
+            }
+        }
+
+        volatile CThunkTrampoline m_thunk;
+
+        inline void init(T *instance, CCallback callback, void* context)
+        {
+            /* remember callback - need to add this level of redirection
+               as pointer size for member functions differs between platforms */
+            m_callback = callback;
+
+            /* populate thunking trampoline */
+            CTHUNK_ASSIGMENT;
+            m_thunk.context = (uint32_t)context;
+            m_thunk.instance = (uint32_t)instance;
+            m_thunk.callback = (uint32_t)&m_callback;
+            m_thunk.trampoline = (uint32_t)&trampoline;
+
+#if defined(__CORTEX_A9)
+            /* Data cache clean */
+            /* Cache control */
+            {
+                uint32_t start_addr = (uint32_t)&m_thunk & 0xFFFFFFE0;
+                uint32_t end_addr   = (uint32_t)&m_thunk + sizeof(m_thunk);
+                uint32_t addr;
+                
+                /* Data cache clean and invalid */
+                for (addr = start_addr; addr < end_addr; addr += 0x20) {
+                    __v7_clean_inv_dcache_mva((void *)addr);
+                }
+                /* Instruction cache invalid */
+                __v7_inv_icache_all();
+                __ca9u_inv_tlb_all();
+                __v7_inv_btac();
+            }
+#endif
+            __ISB();
+            __DSB();
+        }
+};
+
+#endif/*__CTHUNK_H__*/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/CallChain.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,181 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CALLCHAIN_H
+#define MBED_CALLCHAIN_H
+
+#include "FunctionPointer.h"
+#include <string.h>
+
+namespace mbed {
+
+/** Group one or more functions in an instance of a CallChain, then call them in
+ * sequence using CallChain::call(). Used mostly by the interrupt chaining code,
+ * but can be used for other purposes.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * CallChain chain;
+ *
+ * void first(void) {
+ *     printf("'first' function.\n");
+ * }
+ *
+ * void second(void) {
+ *     printf("'second' function.\n");
+ * }
+ *
+ * class Test {
+ * public:
+ *     void f(void) {
+ *         printf("A::f (class member).\n");
+ *     }
+ * };
+ *
+ * int main() {
+ *     Test test;
+ *
+ *     chain.add(second);
+ *     chain.add_front(first);
+ *     chain.add(&test, &Test::f);
+ *     chain.call();
+ * }
+ * @endcode
+ */
+
+typedef FunctionPointer* pFunctionPointer_t;
+
+class CallChain {
+public:
+    /** Create an empty chain
+     *
+     *  @param size (optional) Initial size of the chain
+     */
+    CallChain(int size = 4);
+    virtual ~CallChain();
+
+    /** Add a function at the end of the chain
+     *
+     *  @param function A pointer to a void function
+     *
+     *  @returns
+     *  The function object created for 'function'
+     */
+    pFunctionPointer_t add(void (*function)(void));
+
+    /** Add a function at the end of the chain
+     *
+     *  @param tptr pointer to the object to call the member function on
+     *  @param mptr pointer to the member function to be called
+     *
+     *  @returns
+     *  The function object created for 'tptr' and 'mptr'
+     */
+    template<typename T>
+    pFunctionPointer_t add(T *tptr, void (T::*mptr)(void)) {
+        return common_add(new FunctionPointer(tptr, mptr));
+    }
+
+    /** Add a function at the beginning of the chain
+     *
+     *  @param function A pointer to a void function
+     *
+     *  @returns
+     *  The function object created for 'function'
+     */
+    pFunctionPointer_t add_front(void (*function)(void));
+
+    /** Add a function at the beginning of the chain
+     *
+     *  @param tptr pointer to the object to call the member function on
+     *  @param mptr pointer to the member function to be called
+     *
+     *  @returns
+     *  The function object created for 'tptr' and 'mptr'
+     */
+    template<typename T>
+    pFunctionPointer_t add_front(T *tptr, void (T::*mptr)(void)) {
+        return common_add_front(new FunctionPointer(tptr, mptr));
+    }
+
+    /** Get the number of functions in the chain
+     */
+    int size() const;
+
+    /** Get a function object from the chain
+     *
+     *  @param i function object index
+     *
+     *  @returns
+     *  The function object at position 'i' in the chain
+     */
+    pFunctionPointer_t get(int i) const;
+
+    /** Look for a function object in the call chain
+     *
+     *  @param f the function object to search
+     *
+     *  @returns
+     *  The index of the function object if found, -1 otherwise.
+     */
+    int find(pFunctionPointer_t f) const;
+
+    /** Clear the call chain (remove all functions in the chain).
+     */
+    void clear();
+
+    /** Remove a function object from the chain
+     *
+     *  @arg f the function object to remove
+     *
+     *  @returns
+     *  true if the function object was found and removed, false otherwise.
+     */
+    bool remove(pFunctionPointer_t f);
+
+    /** Call all the functions in the chain in sequence
+     */
+    void call();
+
+#ifdef MBED_OPERATORS
+    void operator ()(void) {
+        call();
+    }
+    pFunctionPointer_t operator [](int i) const {
+        return get(i);
+    }
+#endif
+
+private:
+    void _check_size();
+    pFunctionPointer_t common_add(pFunctionPointer_t pf);
+    pFunctionPointer_t common_add_front(pFunctionPointer_t pf);
+
+    pFunctionPointer_t* _chain;
+    int _size;
+    int _elements;
+
+    /* disallow copy constructor and assignment operators */
+private:
+    CallChain(const CallChain&);
+    CallChain & operator = (const CallChain&);
+};
+
+} // namespace mbed
+
+#endif
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/CircularBuffer.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,98 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CIRCULARBUFFER_H
+#define MBED_CIRCULARBUFFER_H
+
+namespace mbed {
+
+/** Templated Circular buffer class
+ */
+template<typename T, uint32_t BufferSize, typename CounterType = uint32_t>
+class CircularBuffer {
+public:
+    CircularBuffer() : _head(0), _tail(0), _full(false) {
+    }
+
+    ~CircularBuffer() {
+    }
+
+    /** Push the transaction to the buffer. This overwrites the buffer if it's
+     *  full
+     *
+     * @param data Data to be pushed to the buffer
+     */
+    void push(const T& data) {
+        if (full()) {
+            _tail++;
+            _tail %= BufferSize;
+        }
+        _pool[_head++] = data;
+        _head %= BufferSize;
+        if (_head == _tail) {
+            _full = true;
+        }
+    }
+
+    /** Pop the transaction from the buffer
+     *
+     * @param data Data to be pushed to the buffer
+     * @return True if the buffer is not empty and data contains a transaction, false otherwise
+     */
+    bool pop(T& data) {
+        if (!empty()) {
+            data = _pool[_tail++];
+            _tail %= BufferSize;
+            _full = false;
+            return true;
+        }
+        return false;
+    }
+
+    /** Check if the buffer is empty
+     *
+     * @return True if the buffer is empty, false if not
+     */
+    bool empty() {
+        return (_head == _tail) && !_full;
+    }
+
+    /** Check if the buffer is full
+     *
+     * @return True if the buffer is full, false if not
+     */
+    bool full() {
+        return _full;
+    }
+
+    /** Reset the buffer
+     *
+     */
+    void reset() {
+        _head = 0;
+        _tail = 0;
+        _full = false;
+    }
+
+private:
+    T _pool[BufferSize];
+    volatile CounterType _head;
+    volatile CounterType _tail;
+    volatile bool _full;
+};
+
+}
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/DigitalIn.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,107 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALIN_H
+#define MBED_DIGITALIN_H
+
+#include "platform.h"
+
+#include "gpio_api.h"
+
+namespace mbed {
+
+/** A digital input, used for reading the state of a pin
+ *
+ * Example:
+ * @code
+ * // Flash an LED while a DigitalIn is true
+ *
+ * #include "mbed.h"
+ *
+ * DigitalIn enable(p5);
+ * DigitalOut led(LED1);
+ *
+ * int main() {
+ *     while(1) {
+ *         if(enable) {
+ *             led = !led;
+ *         }
+ *         wait(0.25);
+ *     }
+ * }
+ * @endcode
+ */
+class DigitalIn {
+
+public:
+    /** Create a DigitalIn connected to the specified pin
+     *
+     *  @param pin DigitalIn pin to connect to
+     */
+    DigitalIn(PinName pin) : gpio() {
+        gpio_init_in(&gpio, pin);
+    }
+
+    /** Create a DigitalIn connected to the specified pin
+     *
+     *  @param pin DigitalIn pin to connect to
+     *  @param mode the initial mode of the pin
+     */
+    DigitalIn(PinName pin, PinMode mode) : gpio() {
+        gpio_init_in_ex(&gpio, pin, mode);
+    }
+    /** Read the input, represented as 0 or 1 (int)
+     *
+     *  @returns
+     *    An integer representing the state of the input pin,
+     *    0 for logical 0, 1 for logical 1
+     */
+    int read() {
+        return gpio_read(&gpio);
+    }
+
+    /** Set the input pin mode
+     *
+     *  @param mode PullUp, PullDown, PullNone, OpenDrain
+     */
+    void mode(PinMode pull) {
+        gpio_mode(&gpio, pull);
+    }
+
+    /** Return the output setting, represented as 0 or 1 (int)
+     *
+     *  @returns
+     *    Non zero value if pin is connected to uc GPIO
+     *    0 if gpio object was initialized with NC
+     */
+    int is_connected() {
+        return gpio_is_connected(&gpio);
+    }
+
+#ifdef MBED_OPERATORS
+    /** An operator shorthand for read()
+     */
+    operator int() {
+        return read();
+    }
+#endif
+
+protected:
+    gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/DigitalInOut.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,124 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALINOUT_H
+#define MBED_DIGITALINOUT_H
+
+#include "platform.h"
+
+#include "gpio_api.h"
+
+namespace mbed {
+
+/** A digital input/output, used for setting or reading a bi-directional pin
+ */
+class DigitalInOut {
+
+public:
+    /** Create a DigitalInOut connected to the specified pin
+     *
+     *  @param pin DigitalInOut pin to connect to
+     */
+    DigitalInOut(PinName pin) : gpio() {
+        gpio_init_in(&gpio, pin);
+    }
+
+    /** Create a DigitalInOut connected to the specified pin
+     *
+     *  @param pin DigitalInOut pin to connect to
+     *  @param direction the initial direction of the pin
+     *  @param mode the initial mode of the pin
+     *  @param value the initial value of the pin if is an output
+     */
+    DigitalInOut(PinName pin, PinDirection direction, PinMode mode, int value) : gpio() {
+        gpio_init_inout(&gpio, pin, direction, mode, value);
+    }
+
+    /** Set the output, specified as 0 or 1 (int)
+     *
+     *  @param value An integer specifying the pin output value,
+     *      0 for logical 0, 1 (or any other non-zero value) for logical 1
+     */
+    void write(int value) {
+        gpio_write(&gpio, value);
+    }
+
+    /** Return the output setting, represented as 0 or 1 (int)
+     *
+     *  @returns
+     *    an integer representing the output setting of the pin if it is an output,
+     *    or read the input if set as an input
+     */
+    int read() {
+        return gpio_read(&gpio);
+    }
+
+    /** Set as an output
+     */
+    void output() {
+        gpio_dir(&gpio, PIN_OUTPUT);
+    }
+
+    /** Set as an input
+     */
+    void input() {
+        gpio_dir(&gpio, PIN_INPUT);
+    }
+
+    /** Set the input pin mode
+     *
+     *  @param mode PullUp, PullDown, PullNone, OpenDrain
+     */
+    void mode(PinMode pull) {
+        gpio_mode(&gpio, pull);
+    }
+
+    /** Return the output setting, represented as 0 or 1 (int)
+     *
+     *  @returns
+     *    Non zero value if pin is connected to uc GPIO
+     *    0 if gpio object was initialized with NC
+     */
+    int is_connected() {
+        return gpio_is_connected(&gpio);
+    }
+
+#ifdef MBED_OPERATORS
+    /** A shorthand for write()
+     */
+    DigitalInOut& operator= (int value) {
+        write(value);
+        return *this;
+    }
+
+    DigitalInOut& operator= (DigitalInOut& rhs) {
+        write(rhs.read());
+        return *this;
+    }
+
+    /** A shorthand for read()
+     */
+    operator int() {
+        return read();
+    }
+#endif
+
+protected:
+    gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/DigitalOut.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,116 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIGITALOUT_H
+#define MBED_DIGITALOUT_H
+
+#include "platform.h"
+#include "gpio_api.h"
+
+namespace mbed {
+
+/** A digital output, used for setting the state of a pin
+ *
+ * Example:
+ * @code
+ * // Toggle a LED
+ * #include "mbed.h"
+ *
+ * DigitalOut led(LED1);
+ *
+ * int main() {
+ *     while(1) {
+ *         led = !led;
+ *         wait(0.2);
+ *     }
+ * }
+ * @endcode
+ */
+class DigitalOut {
+
+public:
+    /** Create a DigitalOut connected to the specified pin
+     *
+     *  @param pin DigitalOut pin to connect to
+     */
+    DigitalOut(PinName pin) : gpio() {
+        gpio_init_out(&gpio, pin);
+    }
+
+    /** Create a DigitalOut connected to the specified pin
+     *
+     *  @param pin DigitalOut pin to connect to
+     *  @param value the initial pin value
+     */
+    DigitalOut(PinName pin, int value) : gpio() {
+        gpio_init_out_ex(&gpio, pin, value);
+    }
+
+    /** Set the output, specified as 0 or 1 (int)
+     *
+     *  @param value An integer specifying the pin output value,
+     *      0 for logical 0, 1 (or any other non-zero value) for logical 1
+     */
+    void write(int value) {
+        gpio_write(&gpio, value);
+    }
+
+    /** Return the output setting, represented as 0 or 1 (int)
+     *
+     *  @returns
+     *    an integer representing the output setting of the pin,
+     *    0 for logical 0, 1 for logical 1
+     */
+    int read() {
+        return gpio_read(&gpio);
+    }
+
+    /** Return the output setting, represented as 0 or 1 (int)
+     *
+     *  @returns
+     *    Non zero value if pin is connected to uc GPIO
+     *    0 if gpio object was initialized with NC
+     */
+    int is_connected() {
+        return gpio_is_connected(&gpio);
+    }
+
+#ifdef MBED_OPERATORS
+    /** A shorthand for write()
+     */
+    DigitalOut& operator= (int value) {
+        write(value);
+        return *this;
+    }
+
+    DigitalOut& operator= (DigitalOut& rhs) {
+        write(rhs.read());
+        return *this;
+    }
+
+    /** A shorthand for read()
+     */
+    operator int() {
+        return read();
+    }
+#endif
+
+protected:
+    gpio_t gpio;
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/DirHandle.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DIRHANDLE_H
+#define MBED_DIRHANDLE_H
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+#   define NAME_MAX 255
+typedef int mode_t;
+
+#else
+#   include <sys/syslimits.h>
+#endif
+
+#include "FileHandle.h"
+
+struct dirent {
+    char d_name[NAME_MAX+1];
+};
+
+namespace mbed {
+
+/** Represents a directory stream. Objects of this type are returned
+ *  by a FileSystemLike's opendir method. Implementations must define
+ *  at least closedir, readdir and rewinddir.
+ *
+ *  If a FileSystemLike class defines the opendir method, then the
+ *  directories of an object of that type can be accessed by
+ *  DIR *d = opendir("/example/directory") (or opendir("/example")
+ *  to open the root of the filesystem), and then using readdir(d) etc.
+ *
+ *  The root directory is considered to contain all FileLike and
+ *  FileSystemLike objects, so the DIR* returned by opendir("/") will
+ *  reflect this.
+ */
+class DirHandle {
+
+public:
+    /** Closes the directory.
+     *
+     *  @returns
+     *    0 on success,
+     *   -1 on error.
+     */
+    virtual int closedir()=0;
+
+    /** Return the directory entry at the current position, and
+     *  advances the position to the next entry.
+     *
+     * @returns
+     *  A pointer to a dirent structure representing the
+     *  directory entry at the current position, or NULL on reaching
+     *  end of directory or error.
+     */
+    virtual struct dirent *readdir()=0;
+
+    /** Resets the position to the beginning of the directory.
+     */
+    virtual void rewinddir()=0;
+
+    /** Returns the current position of the DirHandle.
+     *
+     * @returns
+     *   the current position,
+     *  -1 on error.
+     */
+    virtual off_t telldir() { return -1; }
+
+    /** Sets the position of the DirHandle.
+     *
+     *  @param location The location to seek to. Must be a value returned by telldir.
+     */
+    virtual void seekdir(off_t location) { }
+
+    virtual ~DirHandle() {}
+};
+
+} // namespace mbed
+
+typedef mbed::DirHandle DIR;
+
+extern "C" {
+    DIR *opendir(const char*);
+    struct dirent *readdir(DIR *);
+    int closedir(DIR*);
+    void rewinddir(DIR*);
+    long telldir(DIR*);
+    void seekdir(DIR*, long);
+    int mkdir(const char *name, mode_t n);
+};
+
+#endif /* MBED_DIRHANDLE_H */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/Ethernet.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,170 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ETHERNET_H
+#define MBED_ETHERNET_H
+
+#include "platform.h"
+
+#if DEVICE_ETHERNET
+
+namespace mbed {
+
+/** An ethernet interface, to use with the ethernet pins.
+ *
+ * Example:
+ * @code
+ * // Read destination and source from every ethernet packet
+ *
+ * #include "mbed.h"
+ *
+ * Ethernet eth;
+ *
+ * int main() {
+ *     char buf[0x600];
+ *
+ *     while(1) {
+ *         int size = eth.receive();
+ *         if(size > 0) {
+ *             eth.read(buf, size);
+ *             printf("Destination:  %02X:%02X:%02X:%02X:%02X:%02X\n",
+ *                     buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+ *             printf("Source: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ *                     buf[6], buf[7], buf[8], buf[9], buf[10], buf[11]);
+ *         }
+ *
+ *         wait(1);
+ *     }
+ * }
+ * @endcode
+ */
+class Ethernet {
+
+public:
+
+    /** Initialise the ethernet interface.
+     */
+    Ethernet();
+
+    /** Powers the hardware down.
+     */
+    virtual ~Ethernet();
+
+    enum Mode {
+        AutoNegotiate,
+        HalfDuplex10,
+        FullDuplex10,
+        HalfDuplex100,
+        FullDuplex100
+    };
+
+    /** Writes into an outgoing ethernet packet.
+     *
+     *  It will append size bytes of data to the previously written bytes.
+     *
+     *  @param data An array to write.
+     *  @param size The size of data.
+     *
+     *  @returns
+     *   The number of written bytes.
+     */
+    int write(const char *data, int size);
+
+    /** Send an outgoing ethernet packet.
+     *
+     *  After filling in the data in an ethernet packet it must be send.
+     *  Send will provide a new packet to write to.
+     *
+     *  @returns
+     *    0 if the sending was failed,
+     *    or the size of the packet successfully sent.
+     */
+    int send();
+
+    /** Recevies an arrived ethernet packet.
+     *
+     *  Receiving an ethernet packet will drop the last received ethernet packet
+     *  and make a new ethernet packet ready to read.
+     *  If no ethernet packet is arrived it will return 0.
+     *
+     *  @returns
+     *    0 if no ethernet packet is arrived,
+     *    or the size of the arrived packet.
+     */
+    int receive();
+
+    /** Read from an recevied ethernet packet.
+     *
+     *  After receive returnd a number bigger than 0it is
+     *  possible to read bytes from this packet.
+     *  Read will write up to size bytes into data.
+     *
+     *  It is possible to use read multible times.
+     *  Each time read will start reading after the last read byte before.
+     *
+     *  @returns
+     *  The number of byte read.
+     */
+    int read(char *data, int size);
+
+    /** Gives the ethernet address of the mbed.
+     *
+     *  @param mac Must be a pointer to a 6 byte char array to copy the ethernet address in.
+     */
+    void address(char *mac);
+
+    /** Returns if an ethernet link is pressent or not. It takes a wile after Ethernet initializion to show up.
+     *
+     *  @returns
+     *   0 if no ethernet link is pressent,
+     *   1 if an ethernet link is pressent.
+     *
+     * Example:
+     * @code
+     * // Using the Ethernet link function
+     * #include "mbed.h"
+     *
+     * Ethernet eth;
+     *
+     * int main() {
+     *     wait(1); // Needed after startup.
+     *     if (eth.link()) {
+     *          printf("online\n");
+     *     } else {
+     *          printf("offline\n");
+     *     }
+     * }
+     * @endcode
+     */
+    int link();
+
+    /** Sets the speed and duplex parameters of an ethernet link
+     *
+     * - AutoNegotiate      Auto negotiate speed and duplex
+     * - HalfDuplex10       10 Mbit, half duplex
+     * - FullDuplex10       10 Mbit, full duplex
+     * - HalfDuplex100      100 Mbit, half duplex
+     * - FullDuplex100      100 Mbit, full duplex
+     *
+     *  @param mode the speed and duplex mode to set the link to:
+     */
+    void set_link(Mode mode);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/FileBase.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,80 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEBASE_H
+#define MBED_FILEBASE_H
+
+typedef int FILEHANDLE;
+
+#include <stdio.h>
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+#    define O_RDONLY 0
+#    define O_WRONLY 1
+#    define O_RDWR   2
+#    define O_CREAT  0x0200
+#    define O_TRUNC  0x0400
+#    define O_APPEND 0x0008
+
+#    define NAME_MAX 255
+
+typedef int mode_t;
+typedef int ssize_t;
+typedef long off_t;
+
+#else
+#    include <sys/fcntl.h>
+#    include <sys/types.h>
+#    include <sys/syslimits.h>
+#endif
+
+#include "platform.h"
+
+namespace mbed {
+
+typedef enum {
+    FilePathType,
+    FileSystemPathType
+} PathType;
+
+class FileBase {
+public:
+    FileBase(const char *name, PathType t);
+
+    virtual ~FileBase();
+
+    const char* getName(void);
+    PathType    getPathType(void);
+
+    static FileBase *lookup(const char *name, unsigned int len);
+
+    static FileBase *get(int n);
+
+protected:
+    static FileBase *_head;
+
+    FileBase   *_next;
+    const char *_name;
+    PathType    _path_type;
+
+    /* disallow copy constructor and assignment operators */
+private:
+    FileBase(const FileBase&);
+    FileBase & operator = (const FileBase&);
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/FileHandle.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,119 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEHANDLE_H
+#define MBED_FILEHANDLE_H
+
+typedef int FILEHANDLE;
+
+#include <stdio.h>
+
+#if defined(__ARMCC_VERSION) || defined(__ICCARM__)
+typedef int ssize_t;
+typedef long off_t;
+
+#else
+#   include <sys/types.h>
+#endif
+
+namespace mbed {
+
+/** An OO equivalent of the internal FILEHANDLE variable
+ *  and associated _sys_* functions.
+ *
+ * FileHandle is an abstract class, needing at least sys_write and
+ *  sys_read to be implmented for a simple interactive device.
+ *
+ * No one ever directly tals to/instanciates a FileHandle - it gets
+ *  created by FileSystem, and wrapped up by stdio.
+ */
+class FileHandle {
+
+public:
+    /** Write the contents of a buffer to the file
+     *
+     *  @param buffer the buffer to write from
+     *  @param length the number of characters to write
+     *
+     *  @returns
+     *  The number of characters written (possibly 0) on success, -1 on error.
+     */
+    virtual ssize_t write(const void* buffer, size_t length) = 0;
+
+    /** Close the file
+     *
+     *  @returns
+     *  Zero on success, -1 on error.
+     */
+    virtual int close() = 0;
+
+    /** Function read
+     *  Reads the contents of the file into a buffer
+     *
+     *  @param buffer the buffer to read in to
+     *  @param length the number of characters to read
+     *
+     *  @returns
+     *  The number of characters read (zero at end of file) on success, -1 on error.
+     */
+    virtual ssize_t read(void* buffer, size_t length) = 0;
+
+    /** Check if the handle is for a interactive terminal device.
+     * If so, line buffered behaviour is used by default
+     *
+     *  @returns
+     *    1 if it is a terminal,
+     *    0 otherwise
+     */
+    virtual int isatty() = 0;
+
+    /** Move the file position to a given offset from a given location.
+     *
+     *  @param offset The offset from whence to move to
+     *  @param whence SEEK_SET for the start of the file, SEEK_CUR for the
+     *   current file position, or SEEK_END for the end of the file.
+     *
+     *  @returns
+     *    new file position on success,
+     *    -1 on failure or unsupported
+     */
+    virtual off_t lseek(off_t offset, int whence) = 0;
+
+    /** Flush any buffers associated with the FileHandle, ensuring it
+     *  is up to date on disk
+     *
+     *  @returns
+     *    0 on success or un-needed,
+     *   -1 on error
+     */
+    virtual int fsync() = 0;
+
+    virtual off_t flen() {
+        /* remember our current position */
+        off_t pos = lseek(0, SEEK_CUR);
+        if(pos == -1) return -1;
+        /* seek to the end to get the file length */
+        off_t res = lseek(0, SEEK_END);
+        /* return to our old position */
+        lseek(pos, SEEK_SET);
+        return res;
+    }
+
+    virtual ~FileHandle();
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/FileLike.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,44 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILELIKE_H
+#define MBED_FILELIKE_H
+
+#include "FileBase.h"
+#include "FileHandle.h"
+
+namespace mbed {
+
+/* Class FileLike
+ *  A file-like object is one that can be opened with fopen by
+ *  fopen("/name", mode). It is intersection of the classes Base and
+ *  FileHandle.
+ */
+class FileLike : public FileHandle, public FileBase {
+
+public:
+    /* Constructor FileLike
+     *
+     * Variables
+     *  name - The name to use to open the file.
+     */
+    FileLike(const char *name);
+
+    virtual ~FileLike();
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/FilePath.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,46 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILEPATH_H
+#define MBED_FILEPATH_H
+
+#include "platform.h"
+
+#include "FileSystemLike.h"
+#include "FileLike.h"
+
+namespace mbed {
+
+class FilePath {
+public:
+    FilePath(const char* file_path);
+
+    const char* fileName(void);
+
+    bool          isFileSystem(void);
+    FileSystemLike* fileSystem(void);
+
+    bool    isFile(void);
+    FileLike* file(void);
+    bool    exists(void);
+
+private:
+    const char* file_name;
+    FileBase* fb;
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/FileSystemLike.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FILESYSTEMLIKE_H
+#define MBED_FILESYSTEMLIKE_H
+
+#include "platform.h"
+
+#include "FileBase.h"
+#include "FileHandle.h"
+#include "DirHandle.h"
+
+namespace mbed {
+
+/** A filesystem-like object is one that can be used to open files
+ *  though it by fopen("/name/filename", mode)
+ *
+ *  Implementations must define at least open (the default definitions
+ *  of the rest of the functions just return error values).
+ */
+class FileSystemLike : public FileBase {
+
+public:
+    /** FileSystemLike constructor
+     *
+     *  @param name The name to use for the filesystem.
+     */
+    FileSystemLike(const char *name);
+
+    virtual ~FileSystemLike();
+
+    static DirHandle *opendir();
+    friend class BaseDirHandle;
+
+    /** Opens a file from the filesystem
+     *
+     *  @param filename The name of the file to open.
+     *  @param flags One of O_RDONLY, O_WRONLY, or O_RDWR, OR'd with
+     *    zero or more of O_CREAT, O_TRUNC, or O_APPEND.
+     *
+     *  @returns
+     *    A pointer to a FileHandle object representing the
+     *   file on success, or NULL on failure.
+     */
+    virtual FileHandle *open(const char *filename, int flags) = 0;
+
+    /** Remove a file from the filesystem.
+     *
+     *  @param filename the name of the file to remove.
+     *  @param returns 0 on success, -1 on failure.
+     */
+    virtual int remove(const char *filename) { return -1; };
+
+    /** Rename a file in the filesystem.
+     *
+     *  @param oldname the name of the file to rename.
+     *  @param newname the name to rename it to.
+     *
+     *  @returns
+     *    0 on success,
+     *   -1 on failure.
+     */
+    virtual int rename(const char *oldname, const char *newname) { return -1; };
+
+    /** Opens a directory in the filesystem and returns a DirHandle
+     *   representing the directory stream.
+     *
+     *  @param name The name of the directory to open.
+     *
+     *  @returns
+     *    A DirHandle representing the directory stream, or
+     *   NULL on failure.
+     */
+    virtual DirHandle *opendir(const char *name) { return NULL; };
+
+    /** Creates a directory in the filesystem.
+     *
+     *  @param name The name of the directory to create.
+     *  @param mode The permissions to create the directory with.
+     *
+     *  @returns
+     *    0 on success,
+     *   -1 on failure.
+     */
+    virtual int mkdir(const char *name, mode_t mode) { return -1; }
+
+    // TODO other filesystem functions (mkdir, rm, rn, ls etc)
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/FunctionPointer.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,202 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FUNCTIONPOINTER_H
+#define MBED_FUNCTIONPOINTER_H
+
+#include <string.h>
+#include <stdint.h>
+
+namespace mbed {
+
+/* If we had variaditic templates, this wouldn't be a problem, but until C++11 is enabled, we are stuck with multiple classes... */
+
+/** A class for storing and calling a pointer to a static or member function
+ */
+template <typename R, typename A1>
+class FunctionPointerArg1{
+public:
+    /** Create a FunctionPointer, attaching a static function
+     *
+     *  @param function The static function to attach (default is none)
+     */
+    FunctionPointerArg1(R (*function)(A1) = 0) {
+        attach(function);
+    }
+
+    /** Create a FunctionPointer, attaching a member function
+     *
+     *  @param object The object pointer to invoke the member function on (i.e. the this pointer)
+     *  @param function The address of the member function to attach
+     */
+    template<typename T>
+    FunctionPointerArg1(T *object, R (T::*member)(A1)) {
+        attach(object, member);
+    }
+
+    /** Attach a static function
+     *
+     *  @param function The static function to attach (default is none)
+     */
+    void attach(R (*function)(A1)) {
+        _p.function = function;
+        _membercaller = 0;
+    }
+
+    /** Attach a member function
+     *
+     *  @param object The object pointer to invoke the member function on (i.e. the this pointer)
+     *  @param function The address of the member function to attach
+     */
+    template<typename T>
+    void attach(T *object, R (T::*member)(A1)) {
+        _p.object = static_cast<void*>(object);
+        *reinterpret_cast<R (T::**)(A1)>(_member) = member;
+        _membercaller = &FunctionPointerArg1::membercaller<T>;
+    }
+
+    /** Call the attached static or member function
+     */
+    R call(A1 a) {
+        if (_membercaller == 0 && _p.function) {
+           return _p.function(a);
+        } else if (_membercaller && _p.object) {
+           return _membercaller(_p.object, _member, a);
+        }
+        return (R)0;
+    }
+
+    /** Get registered static function
+     */
+    R(*get_function(A1))() {
+        return _membercaller ? (R(*)(A1))0 : (R(*)(A1))_p.function;
+    }
+
+#ifdef MBED_OPERATORS
+    R operator ()(A1 a) {
+        return call(a);
+    }
+    operator bool(void) const {
+        return (_membercaller != NULL ? _p.object : (void*)_p.function) != NULL;
+    }
+#endif
+private:
+    template<typename T>
+    static R membercaller(void *object, uintptr_t *member, A1 a) {
+        T* o = static_cast<T*>(object);
+        R (T::**m)(A1) = reinterpret_cast<R (T::**)(A1)>(member);
+        return (o->**m)(a);
+    }
+
+    union {
+        R (*function)(A1); // static function pointer
+        void *object;      // object this pointer
+    } _p;
+    uintptr_t _member[4]; // aligned raw member function pointer storage - converted back by registered _membercaller
+    R (*_membercaller)(void*, uintptr_t*, A1); // registered membercaller function to convert back and call _m.member on _object
+};
+
+/** A class for storing and calling a pointer to a static or member function (R ()(void))
+ */
+template <typename R>
+class FunctionPointerArg1<R, void>{
+public:
+    /** Create a FunctionPointer, attaching a static function
+     *
+     *  @param function The static function to attach (default is none)
+     */
+    FunctionPointerArg1(R (*function)(void) = 0) {
+        attach(function);
+    }
+
+    /** Create a FunctionPointer, attaching a member function
+     *
+     *  @param object The object pointer to invoke the member function on (i.e. the this pointer)
+     *  @param function The address of the void member function to attach
+     */
+    template<typename T>
+    FunctionPointerArg1(T *object, R (T::*member)(void)) {
+        attach(object, member);
+    }
+
+    /** Attach a static function
+     *
+     *  @param function The void static function to attach (default is none)
+     */
+    void attach(R (*function)(void)) {
+        _p.function = function;
+        _membercaller = 0;
+    }
+
+    /** Attach a member function
+     *
+     *  @param object The object pointer to invoke the member function on (i.e. the this pointer)
+     *  @param function The address of the void member function to attach
+     */
+    template<typename T>
+    void attach(T *object, R (T::*member)(void)) {
+        _p.object = static_cast<void*>(object);
+        *reinterpret_cast<R (T::**)(void)>(_member) = member;
+        _membercaller = &FunctionPointerArg1::membercaller<T>;
+    }
+
+    /** Call the attached static or member function
+     */
+    R call(){
+        if (_membercaller == 0 && _p.function) {
+            return _p.function();
+        } else if (_membercaller && _p.object) {
+            return _membercaller(_p.object, _member);
+        }
+        return (R)0;
+    }
+
+    /** Get registered static function
+     */
+    R(*get_function())() {
+        return _membercaller ? (R(*)())0 : (R(*)())_p.function;
+    }
+
+#ifdef MBED_OPERATORS
+    R operator ()(void) {
+        return call();
+    }
+    operator bool(void) const {
+        return (_membercaller != NULL ? _p.object : (void*)_p.function) != NULL;
+    }
+#endif
+
+private:
+    template<typename T>
+    static R membercaller(void *object, uintptr_t *member) {
+        T* o = static_cast<T*>(object);
+        R (T::**m)(void) = reinterpret_cast<R (T::**)(void)>(member);
+        return (o->**m)();
+    }
+
+    union {
+        R (*function)(void); // static function pointer
+        void *object;        // object this pointer
+    } _p;
+    uintptr_t _member[4]; // aligned raw member function pointer storage - converted back by registered _membercaller
+    R (*_membercaller)(void*, uintptr_t*); // registered membercaller function to convert back and call _m.member on _object
+};
+
+typedef FunctionPointerArg1<void, void> FunctionPointer;
+typedef FunctionPointerArg1<void, int> event_callback_t;
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/I2C.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,176 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_H
+#define MBED_I2C_H
+
+#include "platform.h"
+
+#if DEVICE_I2C
+
+#include "i2c_api.h"
+
+#if DEVICE_I2C_ASYNCH
+#include "CThunk.h"
+#include "dma_api.h"
+#include "FunctionPointer.h"
+#endif
+
+namespace mbed {
+
+/** An I2C Master, used for communicating with I2C slave devices
+ *
+ * Example:
+ * @code
+ * // Read from I2C slave at address 0x62
+ *
+ * #include "mbed.h"
+ *
+ * I2C i2c(p28, p27);
+ *
+ * int main() {
+ *     int address = 0x62;
+ *     char data[2];
+ *     i2c.read(address, data, 2);
+ * }
+ * @endcode
+ */
+class I2C {
+
+public:
+    enum RxStatus {
+        NoData,
+        MasterGeneralCall,
+        MasterWrite,
+        MasterRead
+    };
+
+    enum Acknowledge {
+        NoACK = 0,
+        ACK   = 1
+    };
+
+    /** Create an I2C Master interface, connected to the specified pins
+     *
+     *  @param sda I2C data line pin
+     *  @param scl I2C clock line pin
+     */
+    I2C(PinName sda, PinName scl);
+
+    /** Set the frequency of the I2C interface
+     *
+     *  @param hz The bus frequency in hertz
+     */
+    void frequency(int hz);
+
+    /** Read from an I2C slave
+     *
+     * Performs a complete read transaction. The bottom bit of
+     * the address is forced to 1 to indicate a read.
+     *
+     *  @param address 8-bit I2C slave address [ addr | 1 ]
+     *  @param data Pointer to the byte-array to read data in to
+     *  @param length Number of bytes to read
+     *  @param repeated Repeated start, true - don't send stop at end
+     *
+     *  @returns
+     *       0 on success (ack),
+     *   non-0 on failure (nack)
+     */
+    int read(int address, char *data, int length, bool repeated = false);
+
+    /** Read a single byte from the I2C bus
+     *
+     *  @param ack indicates if the byte is to be acknowledged (1 = acknowledge)
+     *
+     *  @returns
+     *    the byte read
+     */
+    int read(int ack);
+
+    /** Write to an I2C slave
+     *
+     * Performs a complete write transaction. The bottom bit of
+     * the address is forced to 0 to indicate a write.
+     *
+     *  @param address 8-bit I2C slave address [ addr | 0 ]
+     *  @param data Pointer to the byte-array data to send
+     *  @param length Number of bytes to send
+     *  @param repeated Repeated start, true - do not send stop at end
+     *
+     *  @returns
+     *       0 on success (ack),
+     *   non-0 on failure (nack)
+     */
+    int write(int address, const char *data, int length, bool repeated = false);
+
+    /** Write single byte out on the I2C bus
+     *
+     *  @param data data to write out on bus
+     *
+     *  @returns
+     *    '1' if an ACK was received,
+     *    '0' otherwise
+     */
+    int write(int data);
+
+    /** Creates a start condition on the I2C bus
+     */
+
+    void start(void);
+
+    /** Creates a stop condition on the I2C bus
+     */
+    void stop(void);
+
+#if DEVICE_I2C_ASYNCH
+
+    /** Start non-blocking I2C transfer.
+     *
+     * @param address   8/10 bit I2c slave address
+     * @param tx_buffer The TX buffer with data to be transfered
+     * @param tx_length The length of TX buffer in bytes
+     * @param rx_buffer The RX buffer which is used for received data
+     * @param rx_length The length of RX buffer in bytes
+     * @param event     The logical OR of events to modify
+     * @param callback  The event callback function
+     * @param repeated Repeated start, true - do not send stop at end
+     * @return Zero if the transfer has started, or -1 if I2C peripheral is busy
+     */
+    int transfer(int address, const char *tx_buffer, int tx_length, char *rx_buffer, int rx_length, const event_callback_t& callback, int event = I2C_EVENT_TRANSFER_COMPLETE, bool repeated = false);
+
+    /** Abort the on-going I2C transfer
+     */
+    void abort_transfer();
+protected:
+    void irq_handler_asynch(void);
+    event_callback_t _callback;
+    CThunk<I2C> _irq;
+    DMAUsage _usage;
+#endif
+
+protected:
+    void aquire();
+
+    i2c_t _i2c;
+    static I2C  *_owner;
+    int         _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/I2CSlave.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,154 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_SLAVE_H
+#define MBED_I2C_SLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_I2CSLAVE
+
+#include "i2c_api.h"
+
+namespace mbed {
+
+/** An I2C Slave, used for communicating with an I2C Master device
+ *
+ * Example:
+ * @code
+ * // Simple I2C responder
+ * #include <mbed.h>
+ *
+ * I2CSlave slave(p9, p10);
+ *
+ * int main() {
+ *     char buf[10];
+ *     char msg[] = "Slave!";
+ *
+ *     slave.address(0xA0);
+ *     while (1) {
+ *         int i = slave.receive();
+ *         switch (i) {
+ *             case I2CSlave::ReadAddressed:
+ *                 slave.write(msg, strlen(msg) + 1); // Includes null char
+ *                 break;
+ *             case I2CSlave::WriteGeneral:
+ *                 slave.read(buf, 10);
+ *                 printf("Read G: %s\n", buf);
+ *                 break;
+ *             case I2CSlave::WriteAddressed:
+ *                 slave.read(buf, 10);
+ *                 printf("Read A: %s\n", buf);
+ *                 break;
+ *         }
+ *         for(int i = 0; i < 10; i++) buf[i] = 0;    // Clear buffer
+ *     }
+ * }
+ * @endcode
+ */
+class I2CSlave {
+
+public:
+    enum RxStatus {
+        NoData         = 0,
+        ReadAddressed  = 1,
+        WriteGeneral   = 2,
+        WriteAddressed = 3
+    };
+
+    /** Create an I2C Slave interface, connected to the specified pins.
+     *
+     *  @param sda I2C data line pin
+     *  @param scl I2C clock line pin
+     */
+    I2CSlave(PinName sda, PinName scl);
+
+    /** Set the frequency of the I2C interface
+     *
+     *  @param hz The bus frequency in hertz
+     */
+    void frequency(int hz);
+
+    /** Checks to see if this I2C Slave has been addressed.
+     *
+     *  @returns
+     *  A status indicating if the device has been addressed, and how
+     *  - NoData            - the slave has not been addressed
+     *  - ReadAddressed     - the master has requested a read from this slave
+     *  - WriteAddressed    - the master is writing to this slave
+     *  - WriteGeneral      - the master is writing to all slave
+     */
+    int receive(void);
+
+    /** Read from an I2C master.
+     *
+     *  @param data pointer to the byte array to read data in to
+     *  @param length maximum number of bytes to read
+     *
+     *  @returns
+     *       0 on success,
+     *   non-0 otherwise
+     */
+    int read(char *data, int length);
+
+    /** Read a single byte from an I2C master.
+     *
+     *  @returns
+     *    the byte read
+     */
+    int read(void);
+
+    /** Write to an I2C master.
+     *
+     *  @param data pointer to the byte array to be transmitted
+     *  @param length the number of bytes to transmite
+     *
+     *  @returns
+     *       0 on success,
+     *   non-0 otherwise
+     */
+    int write(const char *data, int length);
+
+    /** Write a single byte to an I2C master.
+     *
+     *  @data the byte to write
+     *
+     *  @returns
+     *    '1' if an ACK was received,
+     *    '0' otherwise
+     */
+    int write(int data);
+
+    /** Sets the I2C slave address.
+     *
+     *  @param address The address to set for the slave (ignoring the least
+     *  signifcant bit). If set to 0, the slave will only respond to the
+     *  general call address.
+     */
+    void address(int address);
+
+    /** Reset the I2C slave back into the known ready receiving state.
+     */
+    void stop(void);
+
+protected:
+    i2c_t _i2c;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/InterruptIn.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,135 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERRUPTIN_H
+#define MBED_INTERRUPTIN_H
+
+#include "platform.h"
+
+#if DEVICE_INTERRUPTIN
+
+#include "gpio_api.h"
+#include "gpio_irq_api.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** A digital interrupt input, used to call a function on a rising or falling edge
+ *
+ * Example:
+ * @code
+ * // Flash an LED while waiting for events
+ *
+ * #include "mbed.h"
+ *
+ * InterruptIn event(p16);
+ * DigitalOut led(LED1);
+ *
+ * void trigger() {
+ *     printf("triggered!\n");
+ * }
+ *
+ * int main() {
+ *     event.rise(&trigger);
+ *     while(1) {
+ *         led = !led;
+ *         wait(0.25);
+ *     }
+ * }
+ * @endcode
+ */
+class InterruptIn {
+
+public:
+
+    /** Create an InterruptIn connected to the specified pin
+     *
+     *  @param pin InterruptIn pin to connect to
+     *  @param name (optional) A string to identify the object
+     */
+    InterruptIn(PinName pin);
+    virtual ~InterruptIn();
+
+     int read();
+#ifdef MBED_OPERATORS
+    operator int();
+
+#endif
+
+    /** Attach a function to call when a rising edge occurs on the input
+     *
+     *  @param fptr A pointer to a void function, or 0 to set as none
+     */
+    void rise(void (*fptr)(void));
+
+    /** Attach a member function to call when a rising edge occurs on the input
+     *
+     *  @param tptr pointer to the object to call the member function on
+     *  @param mptr pointer to the member function to be called
+     */
+    template<typename T>
+    void rise(T* tptr, void (T::*mptr)(void)) {
+        _rise.attach(tptr, mptr);
+        gpio_irq_set(&gpio_irq, IRQ_RISE, 1);
+    }
+
+    /** Attach a function to call when a falling edge occurs on the input
+     *
+     *  @param fptr A pointer to a void function, or 0 to set as none
+     */
+    void fall(void (*fptr)(void));
+
+    /** Attach a member function to call when a falling edge occurs on the input
+     *
+     *  @param tptr pointer to the object to call the member function on
+     *  @param mptr pointer to the member function to be called
+     */
+    template<typename T>
+    void fall(T* tptr, void (T::*mptr)(void)) {
+        _fall.attach(tptr, mptr);
+        gpio_irq_set(&gpio_irq, IRQ_FALL, 1);
+    }
+
+    /** Set the input pin mode
+     *
+     *  @param mode PullUp, PullDown, PullNone
+     */
+    void mode(PinMode pull);
+
+    /** Enable IRQ. This method depends on hw implementation, might enable one
+     *  port interrupts. For further information, check gpio_irq_enable().
+     */
+    void enable_irq();
+
+    /** Disable IRQ. This method depends on hw implementation, might disable one
+     *  port interrupts. For further information, check gpio_irq_disable().
+     */
+    void disable_irq();
+
+    static void _irq_handler(uint32_t id, gpio_irq_event event);
+
+protected:
+    gpio_t gpio;
+    gpio_irq_t gpio_irq;
+
+    FunctionPointer _rise;
+    FunctionPointer _fall;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/InterruptManager.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,143 @@
+#ifndef MBED_INTERRUPTMANAGER_H
+#define MBED_INTERRUPTMANAGER_H
+
+#include "cmsis.h"
+#include "CallChain.h"
+#include <string.h>
+
+namespace mbed {
+
+/** Use this singleton if you need to chain interrupt handlers.
+ *
+ * Example (for LPC1768):
+ * @code
+ * #include "InterruptManager.h"
+ * #include "mbed.h"
+ *
+ * Ticker flipper;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ *
+ * void flip(void) {
+ *     led1 = !led1;
+ * }
+ *
+ * void handler(void) {
+ *     led2 = !led1;
+ * }
+ *
+ * int main() {
+ *     led1 = led2 = 0;
+ *     flipper.attach(&flip, 1.0);
+ *     InterruptManager::get()->add_handler(handler, TIMER3_IRQn);
+ * }
+ * @endcode
+ */
+class InterruptManager {
+public:
+    /** Return the only instance of this class
+     */
+    static InterruptManager* get();
+
+    /** Destroy the current instance of the interrupt manager
+     */
+    static void destroy();
+
+    /** Add a handler for an interrupt at the end of the handler list
+     *
+     *  @param function the handler to add
+     *  @param irq interrupt number
+     *
+     *  @returns
+     *  The function object created for 'function'
+     */
+    pFunctionPointer_t add_handler(void (*function)(void), IRQn_Type irq) {
+        return add_common(function, irq);
+    }
+
+    /** Add a handler for an interrupt at the beginning of the handler list
+     *
+     *  @param function the handler to add
+     *  @param irq interrupt number
+     *
+     *  @returns
+     *  The function object created for 'function'
+     */
+    pFunctionPointer_t add_handler_front(void (*function)(void), IRQn_Type irq) {
+        return add_common(function, irq, true);
+    }
+
+    /** Add a handler for an interrupt at the end of the handler list
+     *
+     *  @param tptr pointer to the object that has the handler function
+     *  @param mptr pointer to the actual handler function
+     *  @param irq interrupt number
+     *
+     *  @returns
+     *  The function object created for 'tptr' and 'mptr'
+     */
+    template<typename T>
+    pFunctionPointer_t add_handler(T* tptr, void (T::*mptr)(void), IRQn_Type irq) {
+        return add_common(tptr, mptr, irq);
+    }
+
+    /** Add a handler for an interrupt at the beginning of the handler list
+     *
+     *  @param tptr pointer to the object that has the handler function
+     *  @param mptr pointer to the actual handler function
+     *  @param irq interrupt number
+     *
+     *  @returns
+     *  The function object created for 'tptr' and 'mptr'
+     */
+    template<typename T>
+    pFunctionPointer_t add_handler_front(T* tptr, void (T::*mptr)(void), IRQn_Type irq) {
+        return add_common(tptr, mptr, irq, true);
+    }
+
+    /** Remove a handler from an interrupt
+     *
+     *  @param handler the function object for the handler to remove
+     *  @param irq the interrupt number
+     *
+     *  @returns
+     *  true if the handler was found and removed, false otherwise
+     */
+    bool remove_handler(pFunctionPointer_t handler, IRQn_Type irq);
+
+private:
+    InterruptManager();
+    ~InterruptManager();
+
+    // We declare the copy contructor and the assignment operator, but we don't
+    // implement them. This way, if someone tries to copy/assign our instance,
+    // he will get an error at compile time.
+    InterruptManager(const InterruptManager&);
+    InterruptManager& operator =(const InterruptManager&);
+
+    template<typename T>
+    pFunctionPointer_t add_common(T *tptr, void (T::*mptr)(void), IRQn_Type irq, bool front=false) {
+        int irq_pos = get_irq_index(irq);
+        bool change = must_replace_vector(irq);
+
+        pFunctionPointer_t pf = front ? _chains[irq_pos]->add_front(tptr, mptr) : _chains[irq_pos]->add(tptr, mptr);
+        if (change)
+            NVIC_SetVector(irq, (uint32_t)&InterruptManager::static_irq_helper);
+        return pf;
+    }
+
+    pFunctionPointer_t add_common(void (*function)(void), IRQn_Type irq, bool front=false);
+    bool must_replace_vector(IRQn_Type irq);
+    int get_irq_index(IRQn_Type irq);
+    void irq_helper();
+    void add_helper(void (*function)(void), IRQn_Type irq, bool front=false);
+    static void static_irq_helper();
+
+    CallChain* _chains[NVIC_NUM_VECTORS];
+    static InterruptManager* _instance;
+};
+
+} // namespace mbed
+
+#endif
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/LocalFileSystem.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOCALFILESYSTEM_H
+#define MBED_LOCALFILESYSTEM_H
+
+#include "platform.h"
+
+#if DEVICE_LOCALFILESYSTEM
+
+#include "FileSystemLike.h"
+
+namespace mbed {
+
+FILEHANDLE local_file_open(const char* name, int flags);
+
+class LocalFileHandle : public FileHandle {
+
+public:
+    LocalFileHandle(FILEHANDLE fh);
+
+    virtual int close();
+
+    virtual ssize_t write(const void *buffer, size_t length);
+
+    virtual ssize_t read(void *buffer, size_t length);
+
+    virtual int isatty();
+
+    virtual off_t lseek(off_t position, int whence);
+
+    virtual int fsync();
+
+    virtual off_t flen();
+
+protected:
+    FILEHANDLE _fh;
+    int pos;
+};
+
+/** A filesystem for accessing the local mbed Microcontroller USB disk drive
+ *
+ *  This allows programs to read and write files on the same disk drive that is used to program the
+ *  mbed Microcontroller. Once created, the standard C file access functions are used to open,
+ *  read and write files.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * LocalFileSystem local("local");               // Create the local filesystem under the name "local"
+ *
+ * int main() {
+ *     FILE *fp = fopen("/local/out.txt", "w");  // Open "out.txt" on the local file system for writing
+ *     fprintf(fp, "Hello World!");
+ *     fclose(fp);
+ *     remove("/local/out.txt");                 // Removes the file "out.txt" from the local file system
+ *
+ *     DIR *d = opendir("/local");               // Opens the root directory of the local file system
+ *     struct dirent *p;
+ *     while((p = readdir(d)) != NULL) {         // Print the names of the files in the local file system
+ *       printf("%s\n", p->d_name);              // to stdout.
+ *     }
+ *     closedir(d);
+ * }
+ * @endcode
+ *
+ * @note
+ *  If the microcontroller program makes an access to the local drive, it will be marked as "removed"
+ *  on the Host computer. This means it is no longer accessible from the Host Computer.
+ *
+ *  The drive will only re-appear when the microcontroller program exists. Note that if the program does
+ *  not exit, you will need to hold down reset on the mbed Microcontroller to be able to see the drive again!
+ */
+class LocalFileSystem : public FileSystemLike {
+
+public:
+    LocalFileSystem(const char* n) : FileSystemLike(n) {
+
+    }
+
+    virtual FileHandle *open(const char* name, int flags);
+    virtual int remove(const char *filename);
+    virtual DirHandle *opendir(const char *name);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/LowPowerTicker.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,44 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOWPOWERTICKER_H
+#define MBED_LOWPOWERTICKER_H
+
+#include "platform.h"
+#include "Ticker.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "lp_ticker_api.h"
+
+namespace mbed {
+
+/** Low Power Ticker
+ */
+class LowPowerTicker : public Ticker {
+
+public:
+    LowPowerTicker() : Ticker(get_lp_ticker_data()) {
+    }
+
+    virtual ~LowPowerTicker() {
+    }
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/LowPowerTimeout.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOWPOWERTIMEOUT_H
+#define MBED_LOWPOWERTIMEOUT_H
+
+#include "platform.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "lp_ticker_api.h"
+#include "LowPowerTicker.h"
+
+namespace mbed {
+
+/** Low Power Timout
+ */
+class LowPowerTimeout : public LowPowerTicker {
+
+private:
+    virtual void handler(void) {
+        _function.call();
+    }
+};
+
+}
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/LowPowerTimer.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LOWPOWERTIMER_H
+#define MBED_LOWPOWERTIMER_H
+
+#include "platform.h"
+#include "Timer.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "lp_ticker_api.h"
+
+namespace mbed {
+
+/** Low power timer
+ */
+class LowPowerTimer : public Timer {
+
+public:
+    LowPowerTimer() : Timer(get_lp_ticker_data()) {
+    }
+
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/PortIn.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTIN_H
+#define MBED_PORTIN_H
+
+#include "platform.h"
+
+#if DEVICE_PORTIN
+
+#include "port_api.h"
+
+namespace mbed {
+
+/** A multiple pin digital input
+ *
+ *  Example:
+ * @code
+ * // Switch on an LED if any of mbed pins 21-26 is high
+ *
+ * #include "mbed.h"
+ *
+ * PortIn     p(Port2, 0x0000003F);   // p21-p26
+ * DigitalOut ind(LED4);
+ *
+ * int main() {
+ *     while(1) {
+ *         int pins = p.read();
+ *         if(pins) {
+ *             ind = 1;
+ *         } else {
+ *             ind = 0;
+ *         }
+ *     }
+ * }
+ * @endcode
+ */
+class PortIn {
+public:
+
+    /** Create an PortIn, connected to the specified port
+     *
+     *  @param port Port to connect to (Port0-Port5)
+     *  @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+        */
+    PortIn(PortName port, int mask = 0xFFFFFFFF) {
+        port_init(&_port, port, mask, PIN_INPUT);
+    }
+
+    /** Read the value currently output on the port
+     *
+     *  @returns
+     *    An integer with each bit corresponding to associated port pin setting
+     */
+    int read() {
+        return port_read(&_port);
+    }
+
+    /** Set the input pin mode
+     *
+     *  @param mode PullUp, PullDown, PullNone, OpenDrain
+     */
+    void mode(PinMode mode) {
+        port_mode(&_port, mode);
+    }
+
+    /** A shorthand for read()
+     */
+    operator int() {
+        return read();
+    }
+
+private:
+    port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/PortInOut.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTINOUT_H
+#define MBED_PORTINOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PORTINOUT
+
+#include "port_api.h"
+
+namespace mbed {
+
+/** A multiple pin digital in/out used to set/read multiple bi-directional pins
+ */
+class PortInOut {
+public:
+
+    /** Create an PortInOut, connected to the specified port
+     *
+     *  @param port Port to connect to (Port0-Port5)
+     *  @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+     */
+    PortInOut(PortName port, int mask = 0xFFFFFFFF) {
+        port_init(&_port, port, mask, PIN_INPUT);
+    }
+
+    /** Write the value to the output port
+     *
+     *  @param value An integer specifying a bit to write for every corresponding port pin
+     */
+    void write(int value) {
+        port_write(&_port, value);
+    }
+
+    /** Read the value currently output on the port
+     *
+     *  @returns
+     *    An integer with each bit corresponding to associated port pin setting
+     */
+    int read() {
+        return port_read(&_port);
+    }
+
+    /** Set as an output
+     */
+    void output() {
+        port_dir(&_port, PIN_OUTPUT);
+    }
+
+    /** Set as an input
+     */
+    void input() {
+        port_dir(&_port, PIN_INPUT);
+    }
+
+    /** Set the input pin mode
+     *
+     *  @param mode PullUp, PullDown, PullNone, OpenDrain
+     */
+    void mode(PinMode mode) {
+        port_mode(&_port, mode);
+    }
+
+    /** A shorthand for write()
+     */
+    PortInOut& operator= (int value) {
+        write(value);
+        return *this;
+    }
+
+    PortInOut& operator= (PortInOut& rhs) {
+        write(rhs.read());
+        return *this;
+    }
+
+    /** A shorthand for read()
+     */
+    operator int() {
+        return read();
+    }
+
+private:
+    port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/PortOut.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTOUT_H
+#define MBED_PORTOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PORTOUT
+
+#include "port_api.h"
+
+namespace mbed {
+/** A multiple pin digital out
+ *
+ * Example:
+ * @code
+ * // Toggle all four LEDs
+ *
+ * #include "mbed.h"
+ *
+ * // LED1 = P1.18  LED2 = P1.20  LED3 = P1.21  LED4 = P1.23
+ * #define LED_MASK 0x00B40000
+ *
+ * PortOut ledport(Port1, LED_MASK);
+ *
+ * int main() {
+ *     while(1) {
+ *         ledport = LED_MASK;
+ *         wait(1);
+ *         ledport = 0;
+ *         wait(1);
+ *     }
+ * }
+ * @endcode
+ */
+class PortOut {
+public:
+
+    /** Create an PortOut, connected to the specified port
+     *
+     *  @param port Port to connect to (Port0-Port5)
+     *  @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
+     */
+    PortOut(PortName port, int mask = 0xFFFFFFFF) {
+        port_init(&_port, port, mask, PIN_OUTPUT);
+    }
+
+    /** Write the value to the output port
+     *
+     *  @param value An integer specifying a bit to write for every corresponding PortOut pin
+     */
+    void write(int value) {
+        port_write(&_port, value);
+    }
+
+    /** Read the value currently output on the port
+     *
+     *  @returns
+     *    An integer with each bit corresponding to associated PortOut pin setting
+     */
+    int read() {
+        return port_read(&_port);
+    }
+
+    /** A shorthand for write()
+     */
+    PortOut& operator= (int value) {
+        write(value);
+        return *this;
+    }
+
+    PortOut& operator= (PortOut& rhs) {
+        write(rhs.read());
+        return *this;
+    }
+
+    /** A shorthand for read()
+     */
+    operator int() {
+        return read();
+    }
+
+private:
+    port_t _port;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/PwmOut.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,158 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PWMOUT_H
+#define MBED_PWMOUT_H
+
+#include "platform.h"
+
+#if DEVICE_PWMOUT
+#include "pwmout_api.h"
+
+namespace mbed {
+
+/** A pulse-width modulation digital output
+ *
+ * Example
+ * @code
+ * // Fade a led on.
+ * #include "mbed.h"
+ *
+ * PwmOut led(LED1);
+ *
+ * int main() {
+ *     while(1) {
+ *         led = led + 0.01;
+ *         wait(0.2);
+ *         if(led == 1.0) {
+ *             led = 0;
+ *         }
+ *     }
+ * }
+ * @endcode
+ *
+ * @note
+ *  On the LPC1768 and LPC2368, the PWMs all share the same
+ *  period - if you change the period for one, you change it for all.
+ *  Although routines that change the period maintain the duty cycle
+ *  for its PWM, all other PWMs will require their duty cycle to be
+ *  refreshed.
+ */
+class PwmOut {
+
+public:
+
+    /** Create a PwmOut connected to the specified pin
+     *
+     *  @param pin PwmOut pin to connect to
+     */
+    PwmOut(PinName pin) {
+        pwmout_init(&_pwm, pin);
+    }
+
+    /** Set the ouput duty-cycle, specified as a percentage (float)
+     *
+     *  @param value A floating-point value representing the output duty-cycle,
+     *    specified as a percentage. The value should lie between
+     *    0.0f (representing on 0%) and 1.0f (representing on 100%).
+     *    Values outside this range will be saturated to 0.0f or 1.0f.
+     */
+    void write(float value) {
+        pwmout_write(&_pwm, value);
+    }
+
+    /** Return the current output duty-cycle setting, measured as a percentage (float)
+     *
+     *  @returns
+     *    A floating-point value representing the current duty-cycle being output on the pin,
+     *    measured as a percentage. The returned value will lie between
+     *    0.0f (representing on 0%) and 1.0f (representing on 100%).
+     *
+     *  @note
+     *  This value may not match exactly the value set by a previous <write>.
+     */
+    float read() {
+        return pwmout_read(&_pwm);
+    }
+
+    /** Set the PWM period, specified in seconds (float), keeping the duty cycle the same.
+     *
+     *  @note
+     *   The resolution is currently in microseconds; periods smaller than this
+     *   will be set to zero.
+     */
+    void period(float seconds) {
+        pwmout_period(&_pwm, seconds);
+    }
+
+    /** Set the PWM period, specified in milli-seconds (int), keeping the duty cycle the same.
+     */
+    void period_ms(int ms) {
+        pwmout_period_ms(&_pwm, ms);
+    }
+
+    /** Set the PWM period, specified in micro-seconds (int), keeping the duty cycle the same.
+     */
+    void period_us(int us) {
+        pwmout_period_us(&_pwm, us);
+    }
+
+    /** Set the PWM pulsewidth, specified in seconds (float), keeping the period the same.
+     */
+    void pulsewidth(float seconds) {
+        pwmout_pulsewidth(&_pwm, seconds);
+    }
+
+    /** Set the PWM pulsewidth, specified in milli-seconds (int), keeping the period the same.
+     */
+    void pulsewidth_ms(int ms) {
+        pwmout_pulsewidth_ms(&_pwm, ms);
+    }
+
+    /** Set the PWM pulsewidth, specified in micro-seconds (int), keeping the period the same.
+     */
+    void pulsewidth_us(int us) {
+        pwmout_pulsewidth_us(&_pwm, us);
+    }
+
+#ifdef MBED_OPERATORS
+    /** A operator shorthand for write()
+     */
+    PwmOut& operator= (float value) {
+        write(value);
+        return *this;
+    }
+
+    PwmOut& operator= (PwmOut& rhs) {
+        write(rhs.read());
+        return *this;
+    }
+
+    /** An operator shorthand for read()
+     */
+    operator float() {
+        return read();
+    }
+#endif
+
+protected:
+    pwmout_t _pwm;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/RawSerial.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,90 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_RAW_SERIAL_H
+#define MBED_RAW_SERIAL_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "SerialBase.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A serial port (UART) for communication with other serial devices
+ * This is a variation of the Serial class that doesn't use streams,
+ * thus making it safe to use in interrupt handlers with the RTOS.
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * Example:
+ * @code
+ * // Send a char to the PC
+ *
+ * #include "mbed.h"
+ *
+ * RawSerial pc(USBTX, USBRX);
+ *
+ * int main() {
+ *     pc.putc('A');
+ * }
+ * @endcode
+ */
+class RawSerial: public SerialBase {
+
+public:
+    /** Create a RawSerial port, connected to the specified transmit and receive pins
+     *
+     *  @param tx Transmit pin
+     *  @param rx Receive pin
+     *
+     *  @note
+     *    Either tx or rx may be specified as NC if unused
+     */
+    RawSerial(PinName tx, PinName rx);
+
+    /** Write a char to the serial port
+     *
+     * @param c The char to write
+     *
+     * @returns The written char or -1 if an error occured
+     */
+    int putc(int c);
+
+    /** Read a char from the serial port
+     *
+     * @returns The char read from the serial port
+     */
+    int getc();
+
+    /** Write a string to the serial port
+     *
+     * @param str The string to write
+     *
+     * @returns 0 if the write succeeds, EOF for error
+     */
+    int puts(const char *str);
+
+    int printf(const char *format, ...);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/SPI.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,245 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPI_H
+#define MBED_SPI_H
+
+#include "platform.h"
+
+#if DEVICE_SPI
+
+#include "spi_api.h"
+
+#if DEVICE_SPI_ASYNCH
+#include "CThunk.h"
+#include "dma_api.h"
+#include "CircularBuffer.h"
+#include "FunctionPointer.h"
+#include "Transaction.h"
+#endif
+
+namespace mbed {
+
+/** A SPI Master, used for communicating with SPI slave devices
+ *
+ * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
+ *
+ * Most SPI devices will also require Chip Select and Reset signals. These
+ * can be controlled using <DigitalOut> pins
+ *
+ * Example:
+ * @code
+ * // Send a byte to a SPI slave, and record the response
+ *
+ * #include "mbed.h"
+ *
+ * // hardware ssel (where applicable)
+ * //SPI device(p5, p6, p7, p8); // mosi, miso, sclk, ssel
+ *
+ * // software ssel
+ * SPI device(p5, p6, p7); // mosi, miso, sclk
+ * DigitalOut cs(p8); // ssel
+ *
+ * int main() {
+ *     // hardware ssel (where applicable)
+ *     //int response = device.write(0xFF);
+ *
+ *     // software ssel
+ *     cs = 0;
+ *     int response = device.write(0xFF);
+ *     cs = 1;
+ * }
+ * @endcode
+ */
+class SPI {
+
+public:
+
+    /** Create a SPI master connected to the specified pins
+     *
+     *  mosi or miso can be specfied as NC if not used
+     *
+     *  @param mosi SPI Master Out, Slave In pin
+     *  @param miso SPI Master In, Slave Out pin
+     *  @param sclk SPI Clock pin
+     *  @param ssel SPI chip select pin
+     */
+    SPI(PinName mosi, PinName miso, PinName sclk, PinName ssel=NC);
+
+    /** Configure the data transmission format
+     *
+     *  @param bits Number of bits per SPI frame (4 - 16)
+     *  @param mode Clock polarity and phase mode (0 - 3)
+     *
+     * @code
+     * mode | POL PHA
+     * -----+--------
+     *   0  |  0   0
+     *   1  |  0   1
+     *   2  |  1   0
+     *   3  |  1   1
+     * @endcode
+     */
+    void format(int bits, int mode = 0);
+
+    /** Set the spi bus clock frequency
+     *
+     *  @param hz SCLK frequency in hz (default = 1MHz)
+     */
+    void frequency(int hz = 1000000);
+
+    /** Write to the SPI Slave and return the response
+     *
+     *  @param value Data to be sent to the SPI slave
+     *
+     *  @returns
+     *    Response from the SPI slave
+    */
+    virtual int write(int value);
+
+#if DEVICE_SPI_ASYNCH
+
+    /** Start non-blocking SPI transfer using 8bit buffers.
+     *
+     * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+     *                  the default SPI value is sent
+     * @param tx_length The length of TX buffer in bytes
+     * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+     *                  received data are ignored
+     * @param rx_length The length of RX buffer in bytes
+     * @param callback  The event callback function
+     * @param event     The logical OR of events to modify. Look at spi hal header file for SPI events.
+     * @return Zero if the transfer has started, or -1 if SPI peripheral is busy
+     */
+    template<typename Type>
+    int transfer(const Type *tx_buffer, int tx_length, Type *rx_buffer, int rx_length, const event_callback_t& callback, int event = SPI_EVENT_COMPLETE) {
+        if (spi_active(&_spi)) {
+            return queue_transfer(tx_buffer, tx_length, rx_buffer, rx_length, sizeof(Type)*8, callback, event);
+        }
+        start_transfer(tx_buffer, tx_length, rx_buffer, rx_length, sizeof(Type)*8, callback, event);
+        return 0;
+    }
+
+    /** Abort the on-going SPI transfer, and continue with transfer's in the queue if any.
+     */
+    void abort_transfer();
+
+    /** Clear the transaction buffer
+     */
+    void clear_transfer_buffer();
+
+    /** Clear the transaction buffer and abort on-going transfer.
+     */
+    void abort_all_transfers();
+
+    /** Configure DMA usage suggestion for non-blocking transfers
+     *
+     *  @param usage The usage DMA hint for peripheral
+     *  @return Zero if the usage was set, -1 if a transaction is on-going
+    */
+    int set_dma_usage(DMAUsage usage);
+
+protected:
+    /** SPI IRQ handler
+     *
+    */
+    void irq_handler_asynch(void);
+
+    /** Common transfer method
+     *
+     * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+     *                  the default SPI value is sent
+     * @param tx_length The length of TX buffer in bytes
+     * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+     *                  received data are ignored
+     * @param rx_length The length of RX buffer in bytes
+     * @param bit_width The buffers element width
+     * @param callback  The event callback function
+     * @param event     The logical OR of events to modify
+     * @return Zero if the transfer has started or was added to the queue, or -1 if SPI peripheral is busy/buffer is full
+    */
+    int transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event);
+
+    /**
+     *
+     * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+     *                  the default SPI value is sent
+     * @param tx_length The length of TX buffer in bytes
+     * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+     *                  received data are ignored
+     * @param rx_length The length of RX buffer in bytes
+     * @param bit_width The buffers element width
+     * @param callback  The event callback function
+     * @param event     The logical OR of events to modify
+     * @return Zero if a transfer was added to the queue, or -1 if the queue is full
+    */
+    int queue_transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event);
+
+    /** Configures a callback, spi peripheral and initiate a new transfer
+     *
+     * @param tx_buffer The TX buffer with data to be transfered. If NULL is passed,
+     *                  the default SPI value is sent
+     * @param tx_length The length of TX buffer in bytes
+     * @param rx_buffer The RX buffer which is used for received data. If NULL is passed,
+     *                  received data are ignored
+     * @param rx_length The length of RX buffer in bytes
+     * @param bit_width The buffers element width
+     * @param callback  The event callback function
+     * @param event     The logical OR of events to modify
+    */
+    void start_transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event);
+
+#if TRANSACTION_QUEUE_SIZE_SPI
+
+    /** Start a new transaction
+     *
+     *  @param data Transaction data
+    */
+    void start_transaction(transaction_t *data);
+
+    /** Dequeue a transaction
+     *
+    */
+    void dequeue_transaction();
+    static CircularBuffer<Transaction<SPI>, TRANSACTION_QUEUE_SIZE_SPI> _transaction_buffer;
+#endif
+
+#endif
+
+public:
+    virtual ~SPI() {
+    }
+
+protected:
+    spi_t _spi;
+
+#if DEVICE_SPI_ASYNCH
+    CThunk<SPI> _irq;
+    event_callback_t _callback;
+    DMAUsage _usage;
+#endif
+
+    void aquire(void);
+    static SPI *_owner;
+    int _bits;
+    int _mode;
+    int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/SPISlave.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,122 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPISLAVE_H
+#define MBED_SPISLAVE_H
+
+#include "platform.h"
+
+#if DEVICE_SPISLAVE
+
+#include "spi_api.h"
+
+namespace mbed {
+
+/** A SPI slave, used for communicating with a SPI Master device
+ *
+ * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz
+ *
+ * Example:
+ * @code
+ * // Reply to a SPI master as slave
+ *
+ * #include "mbed.h"
+ *
+ * SPISlave device(p5, p6, p7, p8); // mosi, miso, sclk, ssel
+ *
+ * int main() {
+ *     device.reply(0x00);              // Prime SPI with first reply
+ *     while(1) {
+ *         if(device.receive()) {
+ *             int v = device.read();   // Read byte from master
+ *             v = (v + 1) % 0x100;     // Add one to it, modulo 256
+ *             device.reply(v);         // Make this the next reply
+ *         }
+ *     }
+ * }
+ * @endcode
+ */
+class SPISlave {
+
+public:
+
+    /** Create a SPI slave connected to the specified pins
+     *
+     *  mosi or miso can be specfied as NC if not used
+     *
+     *  @param mosi SPI Master Out, Slave In pin
+     *  @param miso SPI Master In, Slave Out pin
+     *  @param sclk SPI Clock pin
+     *  @param ssel SPI chip select pin
+     */
+    SPISlave(PinName mosi, PinName miso, PinName sclk, PinName ssel);
+
+    /** Configure the data transmission format
+     *
+     *  @param bits Number of bits per SPI frame (4 - 16)
+     *  @param mode Clock polarity and phase mode (0 - 3)
+     *
+     * @code
+     * mode | POL PHA
+     * -----+--------
+     *   0  |  0   0
+     *   1  |  0   1
+     *   2  |  1   0
+     *   3  |  1   1
+     * @endcode
+     */
+    void format(int bits, int mode = 0);
+
+    /** Set the spi bus clock frequency
+     *
+     *  @param hz SCLK frequency in hz (default = 1MHz)
+     */
+    void frequency(int hz = 1000000);
+
+    /** Polls the SPI to see if data has been received
+     *
+     *  @returns
+     *    0 if no data,
+     *    1 otherwise
+     */
+    int receive(void);
+
+    /** Retrieve  data from receive buffer as slave
+     *
+     *  @returns
+     *    the data in the receive buffer
+     */
+    int read(void);
+
+    /** Fill the transmission buffer with the value to be written out
+     *  as slave on the next received message from the master.
+     *
+     *  @param value the data to be transmitted next
+     */
+    void reply(int value);
+
+protected:
+    spi_t _spi;
+
+    int _bits;
+    int _mode;
+    int _hz;
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/Serial.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,74 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIAL_H
+#define MBED_SERIAL_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "Stream.h"
+#include "SerialBase.h"
+#include "serial_api.h"
+
+namespace mbed {
+
+/** A serial port (UART) for communication with other serial devices
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * Example:
+ * @code
+ * // Print "Hello World" to the PC
+ *
+ * #include "mbed.h"
+ *
+ * Serial pc(USBTX, USBRX);
+ *
+ * int main() {
+ *     pc.printf("Hello World\n");
+ * }
+ * @endcode
+ */
+class Serial : public SerialBase, public Stream {
+
+public:
+#if DEVICE_SERIAL_ASYNCH
+    using SerialBase::read;
+    using SerialBase::write;
+#endif
+
+    /** Create a Serial port, connected to the specified transmit and receive pins
+     *
+     *  @param tx Transmit pin
+     *  @param rx Receive pin
+     *
+     *  @note
+     *    Either tx or rx may be specified as NC if unused
+     */
+    Serial(PinName tx, PinName rx, const char *name=NULL);
+
+protected:
+    virtual int _getc();
+    virtual int _putc(int c);
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/SerialBase.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,223 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIALBASE_H
+#define MBED_SERIALBASE_H
+
+#include "platform.h"
+
+#if DEVICE_SERIAL
+
+#include "Stream.h"
+#include "FunctionPointer.h"
+#include "serial_api.h"
+
+#if DEVICE_SERIAL_ASYNCH
+#include "CThunk.h"
+#include "dma_api.h"
+#endif
+
+namespace mbed {
+
+/** A base class for serial port implementations
+ * Can't be instantiated directly (use Serial or RawSerial)
+ */
+class SerialBase {
+
+public:
+    /** Set the baud rate of the serial port
+     *
+     *  @param baudrate The baudrate of the serial port (default = 9600).
+     */
+    void baud(int baudrate);
+
+    enum Parity {
+        None = 0,
+        Odd,
+        Even,
+        Forced1,
+        Forced0
+    };
+
+    enum IrqType {
+        RxIrq = 0,
+        TxIrq
+    };
+
+    enum Flow {
+        Disabled = 0,
+        RTS,
+        CTS,
+        RTSCTS
+    };
+
+    /** Set the transmission format used by the serial port
+     *
+     *  @param bits The number of bits in a word (5-8; default = 8)
+     *  @param parity The parity used (SerialBase::None, SerialBase::Odd, SerialBase::Even, SerialBase::Forced1, SerialBase::Forced0; default = SerialBase::None)
+     *  @param stop The number of stop bits (1 or 2; default = 1)
+     */
+    void format(int bits=8, Parity parity=SerialBase::None, int stop_bits=1);
+
+    /** Determine if there is a character available to read
+     *
+     *  @returns
+     *    1 if there is a character available to read,
+     *    0 otherwise
+     */
+    int readable();
+
+    /** Determine if there is space available to write a character
+     *
+     *  @returns
+     *    1 if there is space to write a character,
+     *    0 otherwise
+     */
+    int writeable();
+
+    /** Attach a function to call whenever a serial interrupt is generated
+     *
+     *  @param fptr A pointer to a void function, or 0 to set as none
+     *  @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+     */
+    void attach(void (*fptr)(void), IrqType type=RxIrq);
+
+    /** Attach a member function to call whenever a serial interrupt is generated
+     *
+     *  @param tptr pointer to the object to call the member function on
+     *  @param mptr pointer to the member function to be called
+     *  @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty)
+     */
+    template<typename T>
+    void attach(T* tptr, void (T::*mptr)(void), IrqType type=RxIrq) {
+        if((mptr != NULL) && (tptr != NULL)) {
+            _irq[type].attach(tptr, mptr);
+            serial_irq_set(&_serial, (SerialIrq)type, 1);
+        } else {
+            serial_irq_set(&_serial, (SerialIrq)type, 0);
+        }
+    }
+
+    /** Generate a break condition on the serial line
+     */
+    void send_break();
+
+#if DEVICE_SERIAL_FC
+    /** Set the flow control type on the serial port
+     *
+     *  @param type the flow control type (Disabled, RTS, CTS, RTSCTS)
+     *  @param flow1 the first flow control pin (RTS for RTS or RTSCTS, CTS for CTS)
+     *  @param flow2 the second flow control pin (CTS for RTSCTS)
+     */
+    void set_flow_control(Flow type, PinName flow1=NC, PinName flow2=NC);
+#endif
+
+    static void _irq_handler(uint32_t id, SerialIrq irq_type);
+
+#if DEVICE_SERIAL_ASYNCH
+
+    /** Begin asynchronous write using 8bit buffer. The completition invokes registered TX event callback
+     *
+     *  @param buffer   The buffer where received data will be stored
+     *  @param length   The buffer length in bytes
+     *  @param callback The event callback function
+     *  @param event    The logical OR of TX events
+     */
+    int write(const uint8_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_TX_COMPLETE);
+
+    /** Begin asynchronous write using 16bit buffer. The completition invokes registered TX event callback
+     *
+     *  @param buffer   The buffer where received data will be stored
+     *  @param length   The buffer length in bytes
+     *  @param callback The event callback function
+     *  @param event    The logical OR of TX events
+     */
+    int write(const uint16_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_TX_COMPLETE);
+
+    /** Abort the on-going write transfer
+     */
+    void abort_write();
+
+    /** Begin asynchronous reading using 8bit buffer. The completition invokes registred RX event callback.
+     *
+     *  @param buffer     The buffer where received data will be stored
+     *  @param length     The buffer length in bytes
+     *  @param callback   The event callback function
+     *  @param event      The logical OR of RX events
+     *  @param char_match The matching character
+     */
+    int read(uint8_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_RX_COMPLETE, unsigned char char_match = SERIAL_RESERVED_CHAR_MATCH);
+
+    /** Begin asynchronous reading using 16bit buffer. The completition invokes registred RX event callback.
+     *
+     *  @param buffer     The buffer where received data will be stored
+     *  @param length     The buffer length in bytes
+     *  @param callback   The event callback function
+     *  @param event      The logical OR of RX events
+     *  @param char_match The matching character
+     */
+    int read(uint16_t *buffer, int length, const event_callback_t& callback, int event = SERIAL_EVENT_RX_COMPLETE, unsigned char char_match = SERIAL_RESERVED_CHAR_MATCH);
+
+    /** Abort the on-going read transfer
+     */
+    void abort_read();
+
+    /** Configure DMA usage suggestion for non-blocking TX transfers
+     *
+     *  @param usage The usage DMA hint for peripheral
+     *  @return Zero if the usage was set, -1 if a transaction is on-going
+     */
+    int set_dma_usage_tx(DMAUsage usage);
+
+    /** Configure DMA usage suggestion for non-blocking RX transfers
+     *
+     *  @param usage The usage DMA hint for peripheral
+     *  @return Zero if the usage was set, -1 if a transaction is on-going
+     */
+    int set_dma_usage_rx(DMAUsage usage);
+
+protected:
+    void start_read(void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event, unsigned char char_match);
+    void start_write(const void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event);
+    void interrupt_handler_asynch(void);
+#endif
+
+protected:
+    SerialBase(PinName tx, PinName rx);
+    virtual ~SerialBase() {
+    }
+
+    int _base_getc();
+    int _base_putc(int c);
+
+#if DEVICE_SERIAL_ASYNCH
+    CThunk<SerialBase> _thunk_irq;
+    event_callback_t _tx_callback;
+    event_callback_t _rx_callback;
+    DMAUsage _tx_usage;
+    DMAUsage _rx_usage;
+#endif
+
+    serial_t        _serial;
+    FunctionPointer _irq[2];
+    int             _baud;
+
+};
+
+} // namespace mbed
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/Stream.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,68 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_STREAM_H
+#define MBED_STREAM_H
+
+#include "platform.h"
+#include "FileLike.h"
+#include <cstdarg>
+
+namespace mbed {
+
+extern void mbed_set_unbuffered_stream(FILE *_file);
+extern int mbed_getc(FILE *_file);
+extern char* mbed_gets(char *s, int size, FILE *_file);
+
+class Stream : public FileLike {
+
+public:
+    Stream(const char *name=NULL);
+    virtual ~Stream();
+
+    int putc(int c);
+    int puts(const char *s);
+    int getc();
+    char *gets(char *s, int size);
+    int printf(const char* format, ...);
+    int scanf(const char* format, ...);
+    int vprintf(const char* format, std::va_list args);
+    int vscanf(const char* format, std::va_list args);
+
+    operator std::FILE*() {return _file;}
+
+protected:
+    virtual int close();
+    virtual ssize_t write(const void* buffer, size_t length);
+    virtual ssize_t read(void* buffer, size_t length);
+    virtual off_t lseek(off_t offset, int whence);
+    virtual int isatty();
+    virtual int fsync();
+    virtual off_t flen();
+
+    virtual int _putc(int c) = 0;
+    virtual int _getc() = 0;
+
+    std::FILE *_file;
+
+    /* disallow copy constructor and assignment operators */
+private:
+    Stream(const Stream&);
+    Stream & operator = (const Stream&);
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/Ticker.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,127 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TICKER_H
+#define MBED_TICKER_H
+
+#include "TimerEvent.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** A Ticker is used to call a function at a recurring interval
+ *
+ *  You can use as many seperate Ticker objects as you require.
+ *
+ * Example:
+ * @code
+ * // Toggle the blinking led after 5 seconds
+ *
+ * #include "mbed.h"
+ *
+ * Ticker timer;
+ * DigitalOut led1(LED1);
+ * DigitalOut led2(LED2);
+ *
+ * int flip = 0;
+ *
+ * void attime() {
+ *     flip = !flip;
+ * }
+ *
+ * int main() {
+ *     timer.attach(&attime, 5);
+ *     while(1) {
+ *         if(flip == 0) {
+ *             led1 = !led1;
+ *         } else {
+ *             led2 = !led2;
+ *         }
+ *         wait(0.2);
+ *     }
+ * }
+ * @endcode
+ */
+class Ticker : public TimerEvent {
+
+public:
+    Ticker() : TimerEvent() {
+    }
+
+    Ticker(const ticker_data_t *data) : TimerEvent(data) {
+    }
+
+    /** Attach a function to be called by the Ticker, specifiying the interval in seconds
+     *
+     *  @param fptr pointer to the function to be called
+     *  @param t the time between calls in seconds
+     */
+    void attach(void (*fptr)(void), float t) {
+        attach_us(fptr, t * 1000000.0f);
+    }
+
+    /** Attach a member function to be called by the Ticker, specifiying the interval in seconds
+     *
+     *  @param tptr pointer to the object to call the member function on
+     *  @param mptr pointer to the member function to be called
+     *  @param t the time between calls in seconds
+     */
+    template<typename T>
+    void attach(T* tptr, void (T::*mptr)(void), float t) {
+        attach_us(tptr, mptr, t * 1000000.0f);
+    }
+
+    /** Attach a function to be called by the Ticker, specifiying the interval in micro-seconds
+     *
+     *  @param fptr pointer to the function to be called
+     *  @param t the time between calls in micro-seconds
+     */
+    void attach_us(void (*fptr)(void), timestamp_t t) {
+        _function.attach(fptr);
+        setup(t);
+    }
+
+    /** Attach a member function to be called by the Ticker, specifiying the interval in micro-seconds
+     *
+     *  @param tptr pointer to the object to call the member function on
+     *  @param mptr pointer to the member function to be called
+     *  @param t the time between calls in micro-seconds
+     */
+    template<typename T>
+    void attach_us(T* tptr, void (T::*mptr)(void), timestamp_t t) {
+        _function.attach(tptr, mptr);
+        setup(t);
+    }
+
+    virtual ~Ticker() {
+        detach();
+    }
+
+    /** Detach the function
+     */
+    void detach();
+
+protected:
+    void setup(timestamp_t t);
+    virtual void handler();
+
+protected:
+    timestamp_t     _delay;     /**< Time delay (in microseconds) for re-setting the multi-shot callback. */
+    FunctionPointer _function;  /**< Callback. */
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/Timeout.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,59 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMEOUT_H
+#define MBED_TIMEOUT_H
+
+#include "Ticker.h"
+
+namespace mbed {
+
+/** A Timeout is used to call a function at a point in the future
+ *
+ * You can use as many seperate Timeout objects as you require.
+ *
+ * Example:
+ * @code
+ * // Blink until timeout.
+ *
+ * #include "mbed.h"
+ *
+ * Timeout timeout;
+ * DigitalOut led(LED1);
+ *
+ * int on = 1;
+ *
+ * void attimeout() {
+ *     on = 0;
+ * }
+ *
+ * int main() {
+ *     timeout.attach(&attimeout, 5);
+ *     while(on) {
+ *         led = !led;
+ *         wait(0.2);
+ *     }
+ * }
+ * @endcode
+ */
+class Timeout : public Ticker {
+
+protected:
+    virtual void handler();
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/Timer.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,91 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMER_H
+#define MBED_TIMER_H
+
+#include "platform.h"
+#include "ticker_api.h"
+
+namespace mbed {
+
+/** A general purpose timer
+ *
+ * Example:
+ * @code
+ * // Count the time to toggle a LED
+ *
+ * #include "mbed.h"
+ *
+ * Timer timer;
+ * DigitalOut led(LED1);
+ * int begin, end;
+ *
+ * int main() {
+ *     timer.start();
+ *     begin = timer.read_us();
+ *     led = !led;
+ *     end = timer.read_us();
+ *     printf("Toggle the led takes %d us", end - begin);
+ * }
+ * @endcode
+ */
+class Timer {
+
+public:
+    Timer();
+    Timer(const ticker_data_t *data);
+
+    /** Start the timer
+     */
+    void start();
+
+    /** Stop the timer
+     */
+    void stop();
+
+    /** Reset the timer to 0.
+     *
+     * If it was already counting, it will continue
+     */
+    void reset();
+
+    /** Get the time passed in seconds
+     */
+    float read();
+
+    /** Get the time passed in mili-seconds
+     */
+    int read_ms();
+
+    /** Get the time passed in micro-seconds
+     */
+    int read_us();
+
+#ifdef MBED_OPERATORS
+    operator float();
+#endif
+
+protected:
+    int slicetime();
+    int _running;          // whether the timer is running
+    unsigned int _start;   // the start time of the latest slice
+    int _time;             // any accumulated time from previous slices
+    const ticker_data_t *_ticker_data;
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/TimerEvent.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TIMEREVENT_H
+#define MBED_TIMEREVENT_H
+
+#include "ticker_api.h"
+#include "us_ticker_api.h"
+
+namespace mbed {
+
+/** Base abstraction for timer interrupts
+*/
+class TimerEvent {
+public:
+    TimerEvent();
+    TimerEvent(const ticker_data_t *data);
+
+    /** The handler registered with the underlying timer interrupt
+     */
+    static void irq(uint32_t id);
+
+    /** Destruction removes it...
+     */
+    virtual ~TimerEvent();
+
+protected:
+    // The handler called to service the timer event of the derived class
+    virtual void handler() = 0;
+
+    // insert in to linked list
+    void insert(timestamp_t timestamp);
+
+    // remove from linked list, if in it
+    void remove();
+
+    ticker_event_t event;
+
+    const ticker_data_t *_ticker_data;
+};
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/Transaction.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,73 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TRANSACTION_H
+#define MBED_TRANSACTION_H
+
+#include "platform.h"
+#include "FunctionPointer.h"
+
+namespace mbed {
+
+/** Transaction structure
+ */
+typedef struct {
+    void *tx_buffer;           /**< Tx buffer */
+    size_t tx_length;          /**< Length of Tx buffer*/
+    void *rx_buffer;           /**< Rx buffer */
+    size_t rx_length;          /**< Length of Rx buffer */
+    uint32_t event;            /**< Event for a transaction */
+    event_callback_t callback; /**< User's callback */
+    uint8_t width;             /**< Buffer's word width (8, 16, 32, 64) */
+} transaction_t;
+
+/** Transaction class defines a transaction.
+ */
+template<typename Class>
+class Transaction {
+public:
+    Transaction(Class *tpointer, const transaction_t& transaction) : _obj(tpointer), _data(transaction) {
+    }
+
+    Transaction() : _obj(), _data() {
+    }
+
+    ~Transaction() {
+    }
+
+    /** Get object's instance for the transaction
+     *
+     * @return The object which was stored
+     */
+    Class* get_object() {
+        return _obj;
+    }
+
+    /** Get the transaction
+     *
+     * @return The transaction which was stored
+     */
+    transaction_t* get_transaction() {
+        return &_data;
+    }
+
+private:
+    Class* _obj;
+    transaction_t _data;
+};
+
+}
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/can_helper.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_HELPER_H
+#define MBED_CAN_HELPER_H
+
+#if DEVICE_CAN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+enum CANFormat {
+    CANStandard = 0,
+    CANExtended = 1,
+    CANAny = 2
+};
+typedef enum CANFormat CANFormat;
+
+enum CANType {
+    CANData   = 0,
+    CANRemote = 1
+};
+typedef enum CANType CANType;
+
+struct CAN_Message {
+    unsigned int   id;                 // 29 bit identifier
+    unsigned char  data[8];            // Data field
+    unsigned char  len;                // Length of data field in bytes
+    CANFormat      format;             // 0 - STANDARD, 1- EXTENDED IDENTIFIER
+    CANType        type;               // 0 - DATA FRAME, 1 - REMOTE FRAME
+};
+typedef struct CAN_Message CAN_Message;
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif
+
+#endif // MBED_CAN_HELPER_H

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/mbed.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,69 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_H
+#define MBED_H
+
+#define MBED_LIBRARY_VERSION 121
+
+#include "platform.h"
+
+// Useful C libraries
+#include <math.h>
+#include <time.h>
+
+// mbed Debug libraries
+#include "mbed_error.h"
+#include "mbed_interface.h"
+
+// mbed Peripheral components
+#include "DigitalIn.h"
+#include "DigitalOut.h"
+#include "DigitalInOut.h"
+#include "BusIn.h"
+#include "BusOut.h"
+#include "BusInOut.h"
+#include "PortIn.h"
+#include "PortInOut.h"
+#include "PortOut.h"
+#include "AnalogIn.h"
+#include "AnalogOut.h"
+#include "PwmOut.h"
+#include "Serial.h"
+#include "SPI.h"
+#include "SPISlave.h"
+#include "I2C.h"
+#include "I2CSlave.h"
+#include "Ethernet.h"
+#include "CAN.h"
+#include "RawSerial.h"
+
+// mbed Internal components
+#include "Timer.h"
+#include "Ticker.h"
+#include "Timeout.h"
+#include "LowPowerTimeout.h"
+#include "LowPowerTicker.h"
+#include "LowPowerTimer.h"
+#include "LocalFileSystem.h"
+#include "InterruptIn.h"
+#include "wait_api.h"
+#include "sleep_api.h"
+#include "rtc_time.h"
+
+using namespace mbed;
+using namespace std;
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/mbed_assert.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ASSERT_H
+#define MBED_ASSERT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Internal mbed assert function which is invoked when MBED_ASSERT macro failes.
+ *  This function is active only if NDEBUG is not defined prior to including this
+ *  assert header file.
+ *  In case of MBED_ASSERT failing condition, error() is called with the assertation message.
+ *  @param expr Expresion to be checked.
+ *  @param file File where assertation failed.
+ *  @param line Failing assertation line number.
+ */
+void mbed_assert_internal(const char *expr, const char *file, int line);
+
+#ifdef __cplusplus
+}
+#endif
+
+#ifdef NDEBUG
+#define MBED_ASSERT(expr) ((void)0)
+
+#else
+#define MBED_ASSERT(expr)                                \
+do {                                                     \
+    if (!(expr)) {                                       \
+        mbed_assert_internal(#expr, __FILE__, __LINE__); \
+    }                                                    \
+} while (0)
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/mbed_debug.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DEBUG_H
+#define MBED_DEBUG_H
+#include "device.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_STDIO_MESSAGES
+#include <stdio.h>
+#include <stdarg.h>
+
+/** Output a debug message
+ *
+ * @param format printf-style format string, followed by variables
+ */
+static inline void debug(const char *format, ...) {
+    va_list args;
+    va_start(args, format);
+    vfprintf(stderr, format, args);
+    va_end(args);
+}
+
+/** Conditionally output a debug message
+ *
+ * NOTE: If the condition is constant false (!= 1) and the compiler optimization
+ * level is greater than 0, then the whole function will be compiled away.
+ *
+ * @param condition output only if condition is true (== 1)
+ * @param format printf-style format string, followed by variables
+ */
+static inline void debug_if(int condition, const char *format, ...) {
+    if (condition == 1) {
+        va_list args;
+        va_start(args, format);
+        vfprintf(stderr, format, args);
+        va_end(args);
+    }
+}
+
+#else
+static inline void debug(const char *format, ...) {}
+static inline void debug_if(int condition, const char *format, ...) {}
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/mbed_error.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ERROR_H
+#define MBED_ERROR_H
+
+/** To generate a fatal compile-time error, you can use the pre-processor #error directive.
+ *
+ * @code
+ * #error "That shouldn't have happened!"
+ * @endcode
+ *
+ * If the compiler evaluates this line, it will report the error and stop the compile.
+ *
+ * For example, you could use this to check some user-defined compile-time variables:
+ *
+ * @code
+ * #define NUM_PORTS 7
+ * #if (NUM_PORTS > 4)
+ *     #error "NUM_PORTS must be less than 4"
+ * #endif
+ * @endcode
+ *
+ * Reporting Run-Time Errors:
+ * To generate a fatal run-time error, you can use the mbed error() function.
+ *
+ * @code
+ * error("That shouldn't have happened!");
+ * @endcode
+ *
+ * If the mbed running the program executes this function, it will print the
+ * message via the USB serial port, and then die with the blue lights of death!
+ *
+ * The message can use printf-style formatting, so you can report variables in the
+ * message too. For example, you could use this to check a run-time condition:
+ *
+ * @code
+ * if(x >= 5) {
+ *     error("expected x to be less than 5, but got %d", x);
+ * }
+ * #endcode
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void error(const char* format, ...);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/mbed_interface.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,114 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERFACE_H
+#define MBED_INTERFACE_H
+
+#include "device.h"
+
+/* Mbed interface mac address
+ * if MBED_MAC_ADD_x are zero, interface uid sets mac address,
+ * otherwise MAC_ADD_x are used.
+ */
+#define MBED_MAC_ADDR_INTERFACE 0x00
+#define MBED_MAC_ADDR_0  MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_1  MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_2  MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_3  MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_4  MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDR_5  MBED_MAC_ADDR_INTERFACE
+#define MBED_MAC_ADDRESS_SUM (MBED_MAC_ADDR_0 | MBED_MAC_ADDR_1 | MBED_MAC_ADDR_2 | MBED_MAC_ADDR_3 | MBED_MAC_ADDR_4 | MBED_MAC_ADDR_5)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_SEMIHOST
+
+/** Functions to control the mbed interface
+ *
+ * mbed Microcontrollers have a built-in interface to provide functionality such as
+ * drag-n-drop download, reset, serial-over-usb, and access to the mbed local file
+ * system. These functions provide means to control the interface suing semihost
+ * calls it supports.
+ */
+
+/** Determine whether the mbed interface is connected, based on whether debug is enabled
+ *
+ *  @returns
+ *    1 if interface is connected,
+ *    0 otherwise
+ */
+int mbed_interface_connected(void);
+
+/** Instruct the mbed interface to reset, as if the reset button had been pressed
+ *
+ *  @returns
+ *    1 if successful,
+ *    0 otherwise (e.g. interface not present)
+ */
+int mbed_interface_reset(void);
+
+/** This will disconnect the debug aspect of the interface, so semihosting will be disabled.
+ * The interface will still support the USB serial aspect
+ *
+ *  @returns
+ *    0 if successful,
+ *   -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_disconnect(void);
+
+/** This will disconnect the debug aspect of the interface, and if the USB cable is not
+ * connected, also power down the interface. If the USB cable is connected, the interface
+ * will remain powered up and visible to the host
+ *
+ *  @returns
+ *    0 if successful,
+ *   -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_powerdown(void);
+
+/** This returns a string containing the 32-character UID of the mbed interface
+ *  This is a weak function that can be overwritten if required
+ *
+ *  @param uid A 33-byte array to write the null terminated 32-byte string
+ *
+ *  @returns
+ *    0 if successful,
+ *   -1 otherwise (e.g. interface not present)
+ */
+int mbed_interface_uid(char *uid);
+
+#endif
+
+/** This returns a unique 6-byte MAC address, based on the interface UID
+ * If the interface is not present, it returns a default fixed MAC address (00:02:F7:F0:00:00)
+ *
+ * This is a weak function that can be overwritten if you want to provide your own mechanism to
+ * provide a MAC address.
+ *
+ *  @param mac A 6-byte array to write the MAC address
+ */
+void mbed_mac_address(char *mac);
+
+/** Cause the mbed to flash the BLOD (Blue LEDs Of Death) sequence
+ */
+void mbed_die(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/platform.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,30 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PLATFORM_H
+#define MBED_PLATFORM_H
+
+#define MBED_OPERATORS    1
+
+#include "device.h"
+#include "PinNames.h"
+#include "PeripheralNames.h"
+
+#include <cstddef>
+#include <cstdlib>
+#include <cstdio>
+#include <cstring>
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/rtc_time.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,85 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <time.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Implementation of the C time.h functions
+ *
+ * Provides mechanisms to set and read the current time, based
+ * on the microcontroller Real-Time Clock (RTC), plus some
+ * standard C manipulation and formating functions.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * int main() {
+ *     set_time(1256729737);  // Set RTC time to Wed, 28 Oct 2009 11:35:37
+ *
+ *     while(1) {
+ *         time_t seconds = time(NULL);
+ *
+ *         printf("Time as seconds since January 1, 1970 = %d\n", seconds);
+ *
+ *         printf("Time as a basic string = %s", ctime(&seconds));
+ *
+ *         char buffer[32];
+ *         strftime(buffer, 32, "%I:%M %p\n", localtime(&seconds));
+ *         printf("Time as a custom formatted string = %s", buffer);
+ *
+ *         wait(1);
+ *     }
+ * }
+ * @endcode
+ */
+
+/** Set the current time
+ *
+ * Initialises and sets the time of the microcontroller Real-Time Clock (RTC)
+ * to the time represented by the number of seconds since January 1, 1970
+ * (the UNIX timestamp).
+ *
+ * @param t Number of seconds since January 1, 1970 (the UNIX timestamp)
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * int main() {
+ *     set_time(1256729737); // Set time to Wed, 28 Oct 2009 11:35:37
+ * }
+ * @endcode
+ */
+void set_time(time_t t);
+
+/** Attach an external RTC to be used for the C time functions
+ *
+ * Do not call this function from an interrupt while an RTC read/write operation may be occurring 
+ *
+ * @param read_rtc pointer to function which returns current UNIX timestamp
+ * @param write_rtc pointer to function which sets current UNIX timestamp, can be NULL
+ * @param init_rtc pointer to funtion which initializes RTC, can be NULL
+ * @param isenabled_rtc pointer to function wich returns if the rtc is enabled, can be NULL
+ */
+void attach_rtc(time_t (*read_rtc)(void), void (*write_rtc)(time_t), void (*init_rtc)(void), int (*isenabled_rtc)(void));
+
+#ifdef __cplusplus
+}
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/semihost_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,93 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SEMIHOST_H
+#define MBED_SEMIHOST_H
+
+#include "device.h"
+#include "toolchain.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_SEMIHOST
+
+#ifndef __CC_ARM
+
+#if defined(__ICCARM__)
+static inline int __semihost(int reason, const void *arg) {
+    return __semihosting(reason, (void*)arg);
+}
+#else
+
+#ifdef __thumb__
+#   define AngelSWI            0xAB
+#   define AngelSWIInsn        "bkpt"
+#   define AngelSWIAsm          bkpt
+#else
+#   define AngelSWI            0x123456
+#   define AngelSWIInsn        "swi"
+#   define AngelSWIAsm          swi
+#endif
+
+static inline int __semihost(int reason, const void *arg) {
+    int value;
+
+    asm volatile (
+       "mov r0, %1"          "\n\t"
+       "mov r1, %2"          "\n\t"
+       AngelSWIInsn " %a3"   "\n\t"
+       "mov %0, r0"
+       : "=r" (value)                                         /* output operands             */
+       : "r" (reason), "r" (arg), "i" (AngelSWI)              /* input operands              */
+       : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc"   /* list of clobbered registers */
+    );
+
+    return value;
+}
+#endif
+#endif
+
+#if DEVICE_LOCALFILESYSTEM
+FILEHANDLE semihost_open(const char* name, int openmode);
+int semihost_close (FILEHANDLE fh);
+int semihost_read  (FILEHANDLE fh, unsigned char* buffer, unsigned int length, int mode);
+int semihost_write (FILEHANDLE fh, const unsigned char* buffer, unsigned int length, int mode);
+int semihost_ensure(FILEHANDLE fh);
+long semihost_flen (FILEHANDLE fh);
+int semihost_seek  (FILEHANDLE fh, long position);
+int semihost_istty (FILEHANDLE fh);
+
+int semihost_remove(const char *name);
+int semihost_rename(const char *old_name, const char *new_name);
+#endif
+
+int semihost_uid(char *uid);
+int semihost_reset(void);
+int semihost_vbus(void);
+int semihost_powerdown(void);
+int semihost_exit(void);
+
+int semihost_connected(void);
+int semihost_disabledebug(void);
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/toolchain.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,35 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TOOLCHAIN_H
+#define MBED_TOOLCHAIN_H
+
+#if defined(TOOLCHAIN_ARM)
+#include <rt_sys.h>
+#endif
+
+#ifndef FILEHANDLE
+typedef int FILEHANDLE;
+#endif
+
+#if defined (__ICCARM__)
+#   define WEAK     __weak
+#   define PACKED   __packed
+#else
+#   define WEAK     __attribute__((weak))
+#   define PACKED   __attribute__((packed))
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/api/wait_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_WAIT_API_H
+#define MBED_WAIT_API_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Generic wait functions.
+ *
+ * These provide simple NOP type wait capabilities.
+ *
+ * Example:
+ * @code
+ * #include "mbed.h"
+ *
+ * DigitalOut heartbeat(LED1);
+ *
+ * int main() {
+ *     while (1) {
+ *         heartbeat = 1;
+ *         wait(0.5);
+ *         heartbeat = 0;
+ *         wait(0.5);
+ *     }
+ * }
+ */
+
+/** Waits for a number of seconds, with microsecond resolution (within
+ *  the accuracy of single precision floating point).
+ *
+ *  @param s number of seconds to wait
+ */
+void wait(float s);
+
+/** Waits a number of milliseconds.
+ *
+ *  @param ms the whole number of milliseconds to wait
+ */
+void wait_ms(int ms);
+
+/** Waits a number of microseconds.
+ *
+ *  @param us the whole number of microseconds to wait
+ */
+void wait_us(int us);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/BusIn.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "BusIn.h"
+#include "mbed_assert.h"
+
+namespace mbed {
+
+BusIn::BusIn(PinName p0, PinName p1, PinName p2, PinName p3, PinName p4, PinName p5, PinName p6, PinName p7, PinName p8, PinName p9, PinName p10, PinName p11, PinName p12, PinName p13, PinName p14, PinName p15) {
+    PinName pins[16] = {p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, p15};
+
+    _nc_mask = 0;
+    for (int i=0; i<16; i++) {
+        _pin[i] = (pins[i] != NC) ? new DigitalIn(pins[i]) : 0;
+        if (pins[i] != NC) {
+            _nc_mask |= (1 << i);
+        }
+    }
+}
+
+BusIn::BusIn(PinName pins[16]) {
+    _nc_mask = 0;
+    for (int i=0; i<16; i++) {
+        _pin[i] = (pins[i] != NC) ? new DigitalIn(pins[i]) : 0;
+        if (pins[i] != NC) {
+            _nc_mask |= (1 << i);
+        }
+    }
+}
+
+BusIn::~BusIn() {
+    for (int i=0; i<16; i++) {
+        if (_pin[i] != 0) {
+            delete _pin[i];
+        }
+    }
+}
+
+int BusIn::read() {
+    int v = 0;
+    for (int i=0; i<16; i++) {
+        if (_pin[i] != 0) {
+            v |= _pin[i]->read() << i;
+        }
+    }
+    return v;
+}
+
+void BusIn::mode(PinMode pull) {
+    for (int i=0; i<16; i++) {
+        if (_pin[i] != 0) {
+            _pin[i]->mode(pull);
+        }
+    }
+}
+
+#ifdef MBED_OPERATORS
+BusIn::operator int() {
+    return read();
+}
+
+DigitalIn& BusIn::operator[] (int index) {
+    MBED_ASSERT(index >= 0 && index <= 16);
+    MBED_ASSERT(_pin[index]);
+    return *_pin[index];
+}
+
+#endif
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/BusInOut.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,115 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "BusInOut.h"
+#include "mbed_assert.h"
+
+namespace mbed {
+
+BusInOut::BusInOut(PinName p0, PinName p1, PinName p2, PinName p3, PinName p4, PinName p5, PinName p6, PinName p7, PinName p8, PinName p9, PinName p10, PinName p11, PinName p12, PinName p13, PinName p14, PinName p15) {
+    PinName pins[16] = {p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, p15};
+
+    _nc_mask = 0;
+    for (int i=0; i<16; i++) {
+        _pin[i] = (pins[i] != NC) ? new DigitalInOut(pins[i]) : 0;
+        if (pins[i] != NC) {
+            _nc_mask |= (1 << i);
+        }
+    }
+}
+
+BusInOut::BusInOut(PinName pins[16]) {
+    _nc_mask = 0;
+    for (int i=0; i<16; i++) {
+        _pin[i] = (pins[i] != NC) ? new DigitalInOut(pins[i]) : 0;
+        if (pins[i] != NC) {
+            _nc_mask |= (1 << i);
+        }
+    }
+}
+
+BusInOut::~BusInOut() {
+    for (int i=0; i<16; i++) {
+        if (_pin[i] != 0) {
+            delete _pin[i];
+        }
+    }
+}
+
+void BusInOut::write(int value) {
+    for (int i=0; i<16; i++) {
+        if (_pin[i] != 0) {
+            _pin[i]->write((value >> i) & 1);
+        }
+    }
+}
+
+int BusInOut::read() {
+    int v = 0;
+    for (int i=0; i<16; i++) {
+        if (_pin[i] != 0) {
+            v |= _pin[i]->read() << i;
+        }
+    }
+    return v;
+}
+
+void BusInOut::output() {
+    for (int i=0; i<16; i++) {
+        if (_pin[i] != 0) {
+            _pin[i]->output();
+        }
+    }
+}
+
+void BusInOut::input() {
+    for (int i=0; i<16; i++) {
+        if (_pin[i] != 0) {
+            _pin[i]->input();
+        }
+    }
+}
+
+void BusInOut::mode(PinMode pull) {
+    for (int i=0; i<16; i++) {
+        if (_pin[i] != 0) {
+            _pin[i]->mode(pull);
+        }
+    }
+}
+
+#ifdef MBED_OPERATORS
+BusInOut& BusInOut::operator= (int v) {
+    write(v);
+    return *this;
+}
+
+BusInOut& BusInOut::operator= (BusInOut& rhs) {
+    write(rhs.read());
+    return *this;
+}
+
+DigitalInOut& BusInOut::operator[] (int index) {
+    MBED_ASSERT(index >= 0 && index <= 16);
+    MBED_ASSERT(_pin[index]);
+    return *_pin[index];
+}
+
+BusInOut::operator int() {
+    return read();
+}
+#endif
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/BusOut.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,91 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "BusOut.h"
+#include "mbed_assert.h"
+
+namespace mbed {
+
+BusOut::BusOut(PinName p0, PinName p1, PinName p2, PinName p3, PinName p4, PinName p5, PinName p6, PinName p7, PinName p8, PinName p9, PinName p10, PinName p11, PinName p12, PinName p13, PinName p14, PinName p15) {
+    PinName pins[16] = {p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, p15};
+
+    _nc_mask = 0;
+    for (int i=0; i<16; i++) {
+        _pin[i] = (pins[i] != NC) ? new DigitalOut(pins[i]) : 0;
+        if (pins[i] != NC) {
+            _nc_mask |= (1 << i);
+        }
+    }
+}
+
+BusOut::BusOut(PinName pins[16]) {
+    _nc_mask = 0;
+    for (int i=0; i<16; i++) {
+        _pin[i] = (pins[i] != NC) ? new DigitalOut(pins[i]) : 0;
+        if (pins[i] != NC) {
+            _nc_mask |= (1 << i);
+        }
+    }
+}
+
+BusOut::~BusOut() {
+    for (int i=0; i<16; i++) {
+        if (_pin[i] != 0) {
+            delete _pin[i];
+        }
+    }
+}
+
+void BusOut::write(int value) {
+    for (int i=0; i<16; i++) {
+        if (_pin[i] != 0) {
+            _pin[i]->write((value >> i) & 1);
+        }
+    }
+}
+
+int BusOut::read() {
+    int v = 0;
+    for (int i=0; i<16; i++) {
+        if (_pin[i] != 0) {
+            v |= _pin[i]->read() << i;
+        }
+    }
+    return v;
+}
+
+#ifdef MBED_OPERATORS
+BusOut& BusOut::operator= (int v) {
+    write(v);
+    return *this;
+}
+
+BusOut& BusOut::operator= (BusOut& rhs) {
+    write(rhs.read());
+    return *this;
+}
+
+DigitalOut& BusOut::operator[] (int index) {
+    MBED_ASSERT(index >= 0 && index <= 16);
+    MBED_ASSERT(_pin[index]);
+    return *_pin[index];
+}
+
+BusOut::operator int() {
+    return read();
+}
+#endif
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/CAN.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,86 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "CAN.h"
+
+#if DEVICE_CAN
+
+#include "cmsis.h"
+
+namespace mbed {
+
+CAN::CAN(PinName rd, PinName td) : _can(), _irq() {
+    can_init(&_can, rd, td);
+    can_irq_init(&_can, (&CAN::_irq_handler), (uint32_t)this);
+}
+
+CAN::~CAN() {
+    can_irq_free(&_can);
+    can_free(&_can);
+}
+
+int CAN::frequency(int f) {
+    return can_frequency(&_can, f);
+}
+
+int CAN::write(CANMessage msg) {
+    return can_write(&_can, msg, 0);
+}
+
+int CAN::read(CANMessage &msg, int handle) {
+    return can_read(&_can, &msg, handle);
+}
+
+void CAN::reset() {
+    can_reset(&_can);
+}
+
+unsigned char CAN::rderror() {
+    return can_rderror(&_can);
+}
+
+unsigned char CAN::tderror() {
+    return can_tderror(&_can);
+}
+
+void CAN::monitor(bool silent) {
+    can_monitor(&_can, (silent) ? 1 : 0);
+}
+
+int CAN::mode(Mode mode) {
+    return can_mode(&_can, (CanMode)mode);
+}
+
+int CAN::filter(unsigned int id, unsigned int mask, CANFormat format, int handle) {
+    return can_filter(&_can, id, mask, format, handle);
+}
+
+void CAN::attach(void (*fptr)(void), IrqType type) {
+    if (fptr) {
+        _irq[(CanIrqType)type].attach(fptr);
+        can_irq_set(&_can, (CanIrqType)type, 1);
+    } else {
+        can_irq_set(&_can, (CanIrqType)type, 0);
+    }
+}
+
+void CAN::_irq_handler(uint32_t id, CanIrqType type) {
+    CAN *handler = (CAN*)id;
+    handler->_irq[type].call();
+}
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/CallChain.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,90 @@
+#include "CallChain.h"
+#include "cmsis.h"
+
+namespace mbed {
+
+CallChain::CallChain(int size) : _chain(), _size(size), _elements(0) {
+    _chain = new pFunctionPointer_t[size]();
+}
+
+CallChain::~CallChain() {
+    clear();
+    delete _chain;
+}
+
+pFunctionPointer_t CallChain::add(void (*function)(void)) {
+    return common_add(new FunctionPointer(function));
+}
+
+pFunctionPointer_t CallChain::add_front(void (*function)(void)) {
+    return common_add_front(new FunctionPointer(function));
+}
+
+int CallChain::size() const {
+    return _elements;
+}
+
+pFunctionPointer_t CallChain::get(int i) const {
+    if (i < 0 || i >= _elements)
+        return NULL;
+    return _chain[i];
+}
+
+int CallChain::find(pFunctionPointer_t f) const {
+    for (int i = 0; i < _elements; i++)
+        if (f == _chain[i])
+            return i;
+    return -1;
+}
+
+void CallChain::clear() {
+    for(int i = 0; i < _elements; i ++) {
+        delete _chain[i];
+        _chain[i] = NULL;
+    }
+    _elements = 0;
+}
+
+bool CallChain::remove(pFunctionPointer_t f) {
+    int i;
+
+    if ((i = find(f)) == -1)
+        return false;
+    if (i != _elements - 1)
+        memmove(_chain + i, _chain + i + 1, (_elements - i - 1) * sizeof(pFunctionPointer_t));
+    delete f;
+    _elements --;
+    return true;
+}
+
+void CallChain::call() {
+    for(int i = 0; i < _elements; i++)
+        _chain[i]->call();
+}
+
+void CallChain::_check_size() {
+    if (_elements < _size)
+        return;
+    _size = (_size < 4) ? 4 : _size + 4;
+    pFunctionPointer_t* new_chain = new pFunctionPointer_t[_size]();
+    memcpy(new_chain, _chain, _elements * sizeof(pFunctionPointer_t));
+    delete _chain;
+    _chain = new_chain;
+}
+
+pFunctionPointer_t CallChain::common_add(pFunctionPointer_t pf) {
+    _check_size();
+    _chain[_elements] = pf;
+    _elements ++;
+    return pf;
+}
+
+pFunctionPointer_t CallChain::common_add_front(pFunctionPointer_t pf) {
+    _check_size();
+    memmove(_chain + 1, _chain, _elements * sizeof(pFunctionPointer_t));
+    _chain[0] = pf;
+    _elements ++;
+    return pf;
+}
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/Ethernet.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,73 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Ethernet.h"
+
+#if DEVICE_ETHERNET
+
+#include "ethernet_api.h"
+
+namespace mbed {
+
+Ethernet::Ethernet() {
+    ethernet_init();
+}
+
+Ethernet::~Ethernet() {
+    ethernet_free();
+}
+
+int Ethernet::write(const char *data, int size) {
+    return ethernet_write(data, size);
+}
+
+int Ethernet::send() {
+    return ethernet_send();
+}
+
+int Ethernet::receive() {
+    return ethernet_receive();
+}
+
+int Ethernet::read(char *data, int size) {
+    return ethernet_read(data, size);
+}
+
+void Ethernet::address(char *mac) {
+    return ethernet_address(mac);
+}
+
+int Ethernet::link() {
+    return ethernet_link();
+}
+
+void Ethernet::set_link(Mode mode) {
+    int speed = -1;
+    int duplex = 0;
+
+    switch(mode) {
+        case AutoNegotiate : speed = -1; duplex = 0; break;
+        case HalfDuplex10  : speed = 0;  duplex = 0; break;
+        case FullDuplex10  : speed = 0;  duplex = 1; break;
+        case HalfDuplex100 : speed = 1;  duplex = 0; break;
+        case FullDuplex100 : speed = 1;  duplex = 1; break;
+    }
+
+    ethernet_set_link(speed, duplex);
+}
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/FileBase.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "FileBase.h"
+
+namespace mbed {
+
+FileBase *FileBase::_head = NULL;
+
+FileBase::FileBase(const char *name, PathType t) : _next(NULL),
+                                                   _name(name),
+                                                   _path_type(t) {
+    if (name != NULL) {
+        // put this object at head of the list
+        _next = _head;
+        _head = this;
+    } else {
+        _next = NULL;
+    }
+}
+
+FileBase::~FileBase() {
+    if (_name != NULL) {
+        // remove this object from the list
+        if (_head == this) { // first in the list, so just drop me
+            _head = _next;
+        } else {             // find the object before me, then drop me
+            FileBase *p = _head;
+            while (p->_next != this) {
+                p = p->_next;
+            }
+            p->_next = _next;
+        }
+    }
+}
+
+FileBase *FileBase::lookup(const char *name, unsigned int len) {
+    FileBase *p = _head;
+    while (p != NULL) {
+        /* Check that p->_name matches name and is the correct length */
+        if (p->_name != NULL && std::strncmp(p->_name, name, len) == 0 && std::strlen(p->_name) == len) {
+            return p;
+        }
+        p = p->_next;
+    }
+    return NULL;
+}
+
+FileBase *FileBase::get(int n) {
+    FileBase *p = _head;
+    int m = 0;
+    while (p != NULL) {
+        if (m == n) return p;
+
+        m++;
+        p = p->_next;
+    }
+    return NULL;
+}
+
+const char* FileBase::getName(void) {
+    return _name;
+}
+
+PathType FileBase::getPathType(void) {
+    return _path_type;
+}
+
+} // namespace mbed
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/FileLike.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,28 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "FileLike.h"
+
+namespace mbed {
+
+FileLike::FileLike(const char *name) : FileHandle(), FileBase(name, FilePathType) {
+
+}
+
+FileLike::~FileLike() {
+
+}
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/FilePath.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,76 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "FilePath.h"
+
+namespace mbed {
+
+FilePath::FilePath(const char* file_path) : file_name(NULL), fb(NULL) {
+    if ((file_path[0] != '/') || (file_path[1] == 0)) return;
+
+    const char* file_system = &file_path[1];
+    file_name = file_system;
+    int len = 0;
+    while (true) {
+        char c = *file_name;
+        if (c == '/') { // end of object name
+            file_name++; // point to one char after the '/'
+            break;
+        }
+        if (c == 0) { // end of object name, with no filename
+            break;
+        }
+        len++;
+        file_name++;
+    }
+
+    fb = FileBase::lookup(file_system, len);
+}
+
+const char* FilePath::fileName(void) {
+    return file_name;
+}
+
+bool FilePath::isFileSystem(void) {
+    if (NULL == fb)
+        return false;
+    return (fb->getPathType() == FileSystemPathType);
+}
+
+FileSystemLike* FilePath::fileSystem(void) {
+    if (isFileSystem()) {
+        return (FileSystemLike*)fb;
+    }
+    return NULL;
+}
+
+bool FilePath::isFile(void) {
+    if (NULL == fb)
+        return false;
+    return (fb->getPathType() == FilePathType);
+}
+
+FileLike* FilePath::file(void) {
+    if (isFile()) {
+        return (FileLike*)fb;
+    }
+    return NULL;
+}
+
+bool FilePath::exists(void) {
+    return fb != NULL;
+}
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/FileSystemLike.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,77 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "FileSystemLike.h"
+
+namespace mbed {
+
+class BaseDirHandle : public DirHandle {
+public:
+    /*
+      We keep track of our current location as the n'th object in the
+      FileSystemLike list. Using a Base* instead would cause problems if that
+      object were to be destroyed between readdirs.
+      Using this method does mean though that destroying/creating objects can
+      give unusual results from readdir.
+    */
+    off_t n;
+    struct dirent cur_entry;
+
+    BaseDirHandle() : n(0), cur_entry() {
+    }
+
+    virtual int closedir() {
+        delete this;
+        return 0;
+    }
+
+    virtual struct dirent *readdir() {
+        FileBase *ptr = FileBase::get(n);
+        if (ptr == NULL) return NULL;
+
+        /* Increment n, so next readdir gets the next item */
+        n++;
+
+        /* Setup cur entry and return a pointer to it */
+        std::strncpy(cur_entry.d_name, ptr->getName(), NAME_MAX);
+        return &cur_entry;
+    }
+
+    virtual off_t telldir() {
+        return n;
+    }
+
+    virtual void seekdir(off_t offset) {
+        n = offset;
+    }
+
+    virtual void rewinddir() {
+        n = 0;
+    }
+};
+
+FileSystemLike::FileSystemLike(const char *name) : FileBase(name, FileSystemPathType) {
+
+}
+
+FileSystemLike::~FileSystemLike() {
+
+}
+
+DirHandle *FileSystemLike::opendir() {
+    return new BaseDirHandle();
+}
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/I2C.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,128 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "I2C.h"
+
+#if DEVICE_I2C
+
+namespace mbed {
+
+I2C *I2C::_owner = NULL;
+
+I2C::I2C(PinName sda, PinName scl) :
+#if DEVICE_I2C_ASYNCH
+                                     _irq(this), _usage(DMA_USAGE_NEVER),
+#endif
+                                      _i2c(), _hz(100000) {
+    // The init function also set the frequency to 100000
+    i2c_init(&_i2c, sda, scl);
+
+    // Used to avoid unnecessary frequency updates
+    _owner = this;
+}
+
+void I2C::frequency(int hz) {
+    _hz = hz;
+
+    // We want to update the frequency even if we are already the bus owners
+    i2c_frequency(&_i2c, _hz);
+
+    // Updating the frequency of the bus we become the owners of it
+    _owner = this;
+}
+
+void I2C::aquire() {
+    if (_owner != this) {
+        i2c_frequency(&_i2c, _hz);
+        _owner = this;
+    }
+}
+
+// write - Master Transmitter Mode
+int I2C::write(int address, const char* data, int length, bool repeated) {
+    aquire();
+
+    int stop = (repeated) ? 0 : 1;
+    int written = i2c_write(&_i2c, address, data, length, stop);
+
+    return length != written;
+}
+
+int I2C::write(int data) {
+    return i2c_byte_write(&_i2c, data);
+}
+
+// read - Master Reciever Mode
+int I2C::read(int address, char* data, int length, bool repeated) {
+    aquire();
+
+    int stop = (repeated) ? 0 : 1;
+    int read = i2c_read(&_i2c, address, data, length, stop);
+
+    return length != read;
+}
+
+int I2C::read(int ack) {
+    if (ack) {
+        return i2c_byte_read(&_i2c, 0);
+    } else {
+        return i2c_byte_read(&_i2c, 1);
+    }
+}
+
+void I2C::start(void) {
+    i2c_start(&_i2c);
+}
+
+void I2C::stop(void) {
+    i2c_stop(&_i2c);
+}
+
+#if DEVICE_I2C_ASYNCH
+
+int I2C::transfer(int address, const char *tx_buffer, int tx_length, char *rx_buffer, int rx_length, const event_callback_t& callback, int event, bool repeated)
+{
+    if (i2c_active(&_i2c)) {
+        return -1; // transaction ongoing
+    }
+    aquire();
+
+    _callback = callback;
+    int stop = (repeated) ? 0 : 1;
+    _irq.callback(&I2C::irq_handler_asynch);
+    i2c_transfer_asynch(&_i2c, (void *)tx_buffer, tx_length, (void *)rx_buffer, rx_length, address, stop, _irq.entry(), event, _usage);
+    return 0;
+}
+
+void I2C::abort_transfer(void)
+{
+    i2c_abort_asynch(&_i2c);
+}
+
+void I2C::irq_handler_asynch(void)
+{
+    int event = i2c_irq_handler_asynch(&_i2c);
+    if (_callback && event) {
+        _callback.call(event);
+    }
+
+}
+
+
+#endif
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/I2CSlave.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,63 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "I2CSlave.h"
+
+#if DEVICE_I2CSLAVE
+
+namespace mbed {
+
+I2CSlave::I2CSlave(PinName sda, PinName scl) : _i2c() {
+    i2c_init(&_i2c, sda, scl);
+    i2c_frequency(&_i2c, 100000);
+    i2c_slave_mode(&_i2c, 1);
+}
+
+void I2CSlave::frequency(int hz) {
+    i2c_frequency(&_i2c, hz);
+}
+
+void I2CSlave::address(int address) {
+    int addr = (address & 0xFF) | 1;
+    i2c_slave_address(&_i2c, 0, addr, 0);
+}
+
+int I2CSlave::receive(void) {
+    return i2c_slave_receive(&_i2c);
+}
+
+int I2CSlave::read(char *data, int length) {
+    return i2c_slave_read(&_i2c, data, length) != length;
+}
+
+int I2CSlave::read(void) {
+    return i2c_byte_read(&_i2c, 0);
+}
+
+int I2CSlave::write(const char *data, int length) {
+    return i2c_slave_write(&_i2c, data, length) != length;
+}
+
+int I2CSlave::write(int data) {
+    return i2c_byte_write(&_i2c, data);
+}
+
+void I2CSlave::stop(void) {
+    i2c_stop(&_i2c);
+}
+
+}
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/InterruptIn.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,87 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "InterruptIn.h"
+
+#if DEVICE_INTERRUPTIN
+
+namespace mbed {
+
+InterruptIn::InterruptIn(PinName pin) : gpio(),
+                                        gpio_irq(),
+                                        _rise(),
+                                        _fall() {
+    gpio_irq_init(&gpio_irq, pin, (&InterruptIn::_irq_handler), (uint32_t)this);
+    gpio_init_in(&gpio, pin);
+}
+
+InterruptIn::~InterruptIn() {
+    gpio_irq_free(&gpio_irq);
+}
+
+int InterruptIn::read() {
+    return gpio_read(&gpio);
+}
+
+void InterruptIn::mode(PinMode pull) {
+    gpio_mode(&gpio, pull);
+}
+
+void InterruptIn::rise(void (*fptr)(void)) {
+    if (fptr) {
+        _rise.attach(fptr);
+        gpio_irq_set(&gpio_irq, IRQ_RISE, 1);
+    } else {
+        _rise.attach(NULL);
+        gpio_irq_set(&gpio_irq, IRQ_RISE, 0);
+    }
+}
+
+void InterruptIn::fall(void (*fptr)(void)) {
+    if (fptr) {
+        _fall.attach(fptr);
+        gpio_irq_set(&gpio_irq, IRQ_FALL, 1);
+    } else {
+        _fall.attach(NULL);
+        gpio_irq_set(&gpio_irq, IRQ_FALL, 0);
+    }
+}
+
+void InterruptIn::_irq_handler(uint32_t id, gpio_irq_event event) {
+    InterruptIn *handler = (InterruptIn*)id;
+    switch (event) {
+        case IRQ_RISE: handler->_rise.call(); break;
+        case IRQ_FALL: handler->_fall.call(); break;
+        case IRQ_NONE: break;
+    }
+}
+
+void InterruptIn::enable_irq() {
+    gpio_irq_enable(&gpio_irq);
+}
+
+void InterruptIn::disable_irq() {
+    gpio_irq_disable(&gpio_irq);
+}
+
+#ifdef MBED_OPERATORS
+InterruptIn::operator int() {
+    return read();
+}
+#endif
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/InterruptManager.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,93 @@
+#include "cmsis.h"
+#if defined(NVIC_NUM_VECTORS)
+
+#include "InterruptManager.h"
+#include <string.h>
+
+#define CHAIN_INITIAL_SIZE    4
+
+namespace mbed {
+
+typedef void (*pvoidf)(void);
+
+InterruptManager* InterruptManager::_instance = (InterruptManager*)NULL;
+
+InterruptManager* InterruptManager::get() {
+    if (NULL == _instance)
+        _instance = new InterruptManager();
+    return _instance;
+}
+
+InterruptManager::InterruptManager() {
+    memset(_chains, 0, NVIC_NUM_VECTORS * sizeof(CallChain*));
+}
+
+void InterruptManager::destroy() {
+    // Not a good idea to call this unless NO interrupt at all
+    // is under the control of the handler; otherwise, a system crash
+    // is very likely to occur
+    if (NULL != _instance) {
+        delete _instance;
+        _instance = (InterruptManager*)NULL;
+    }
+}
+
+InterruptManager::~InterruptManager() {
+    for(int i = 0; i < NVIC_NUM_VECTORS; i++)
+        if (NULL != _chains[i])
+            delete _chains[i];
+}
+
+bool InterruptManager::must_replace_vector(IRQn_Type irq) {
+    int irq_pos = get_irq_index(irq);
+
+    if (NULL == _chains[irq_pos]) {
+        _chains[irq_pos] = new CallChain(CHAIN_INITIAL_SIZE);
+        _chains[irq_pos]->add((pvoidf)NVIC_GetVector(irq));
+        return true;
+    }
+    return false;
+}
+
+pFunctionPointer_t InterruptManager::add_common(void (*function)(void), IRQn_Type irq, bool front) {
+    int irq_pos = get_irq_index(irq);
+    bool change = must_replace_vector(irq);
+
+    pFunctionPointer_t pf = front ? _chains[irq_pos]->add_front(function) : _chains[irq_pos]->add(function);
+    if (change)
+        NVIC_SetVector(irq, (uint32_t)&InterruptManager::static_irq_helper);
+    return pf;
+}
+
+bool InterruptManager::remove_handler(pFunctionPointer_t handler, IRQn_Type irq) {
+    int irq_pos = get_irq_index(irq);
+
+    if (NULL == _chains[irq_pos])
+        return false;
+    if (!_chains[irq_pos]->remove(handler))
+        return false;
+    // If there's a single function left in the chain, swith the interrupt vector
+    // to call that function directly. This way we save both time and space.
+    if (_chains[irq_pos]->size() == 1 && NULL != _chains[irq_pos]->get(0)->get_function()) {
+        NVIC_SetVector(irq, (uint32_t)_chains[irq_pos]->get(0)->get_function());
+        delete _chains[irq_pos];
+        _chains[irq_pos] = (CallChain*) NULL;
+    }
+    return true;
+}
+
+void InterruptManager::irq_helper() {
+    _chains[__get_IPSR()]->call();
+}
+
+int InterruptManager::get_irq_index(IRQn_Type irq) {
+    return (int)irq + NVIC_USER_IRQ_OFFSET;
+}
+
+void InterruptManager::static_irq_helper() {
+    InterruptManager::get()->irq_helper();
+}
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/LocalFileSystem.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,223 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "LocalFileSystem.h"
+
+#if DEVICE_LOCALFILESYSTEM
+
+#include "semihost_api.h"
+#include <string.h>
+#include <stdio.h>
+
+namespace mbed {
+
+/* Extension to FINFO type defined in RTL.h (in Keil RL) - adds 'create time'. */
+typedef struct {
+    unsigned char  hr;   /* Hours    [0..23]                  */
+    unsigned char  min;  /* Minutes  [0..59]                  */
+    unsigned char  sec;  /* Seconds  [0..59]                  */
+    unsigned char  day;  /* Day      [1..31]                  */
+    unsigned char  mon;  /* Month    [1..12]                  */
+    unsigned short year; /* Year     [1980..2107]             */
+} FTIME;
+
+typedef struct {         /* File Search info record           */
+    char  name[32];      /* File name                         */
+    long  size;          /* File size in bytes                */
+    int   fileID;        /* System File Identification        */
+    FTIME create_time;   /* Date & time file was created      */
+    FTIME write_time;    /* Date & time of last write         */
+} XFINFO;
+
+#define RESERVED_FOR_USER_APPLICATIONS (0x100) /* 0x100 - 0x1ff */
+#define USR_XFFIND (RESERVED_FOR_USER_APPLICATIONS + 0)
+
+static int xffind (const char *pattern, XFINFO *info) {
+    unsigned param[4];
+
+    param[0] = (unsigned long)pattern;
+    param[1] = (unsigned long)strlen(pattern);
+    param[2] = (unsigned long)info;
+    param[3] = (unsigned long)sizeof(XFINFO);
+
+    return __semihost(USR_XFFIND, param);
+}
+
+#define OPEN_R          0
+#define OPEN_B          1
+#define OPEN_PLUS       2
+#define OPEN_W          4
+#define OPEN_A          8
+#define OPEN_INVALID   -1
+
+int posix_to_semihost_open_flags(int flags) {
+    /* POSIX flags -> semihosting open mode */
+    int openmode;
+    if (flags & O_RDWR) {
+        /* a plus mode */
+        openmode = OPEN_PLUS;
+        if (flags & O_APPEND) {
+            openmode |= OPEN_A;
+        } else if (flags & O_TRUNC) {
+            openmode |= OPEN_W;
+        } else {
+            openmode |= OPEN_R;
+        }
+    } else if (flags & O_WRONLY) {
+        /* write or append */
+        if (flags & O_APPEND) {
+            openmode = OPEN_A;
+        } else {
+            openmode = OPEN_W;
+        }
+    } else if (flags == O_RDONLY) {
+        /* read mode */
+        openmode = OPEN_R;
+    } else {
+        /* invalid flags */
+        openmode = OPEN_INVALID;
+    }
+
+    return openmode;
+}
+
+FILEHANDLE local_file_open(const char* name, int flags) {
+    int openmode = posix_to_semihost_open_flags(flags);
+    if (openmode == OPEN_INVALID) {
+        return (FILEHANDLE)NULL;
+    }
+
+    FILEHANDLE fh = semihost_open(name, openmode);
+    if (fh == -1) {
+        return (FILEHANDLE)NULL;
+    }
+
+    return fh;
+}
+
+LocalFileHandle::LocalFileHandle(FILEHANDLE fh) : _fh(fh), pos(0) {
+}
+
+int LocalFileHandle::close() {
+    int retval = semihost_close(_fh);
+    delete this;
+    return retval;
+}
+
+ssize_t LocalFileHandle::write(const void *buffer, size_t length) {
+    ssize_t n = semihost_write(_fh, (const unsigned char*)buffer, length, 0); // number of characters not written
+    n = length - n; // number of characters written
+    pos += n;
+    return n;
+}
+
+ssize_t LocalFileHandle::read(void *buffer, size_t length) {
+    ssize_t n = semihost_read(_fh, (unsigned char*)buffer, length, 0); // number of characters not read
+    n = length - n; // number of characters read
+    pos += n;
+    return n;
+}
+
+int LocalFileHandle::isatty() {
+    return semihost_istty(_fh);
+}
+
+off_t LocalFileHandle::lseek(off_t position, int whence) {
+    if (whence == SEEK_CUR) {
+        position += pos;
+    } else if (whence == SEEK_END) {
+        position += semihost_flen(_fh);
+    } /* otherwise SEEK_SET, so position is fine */
+
+    /* Always seems to return -1, so just ignore for now. */
+    semihost_seek(_fh, position);
+    pos = position;
+    return position;
+}
+
+int LocalFileHandle::fsync() {
+    return semihost_ensure(_fh);
+}
+
+off_t LocalFileHandle::flen() {
+    return semihost_flen(_fh);
+}
+
+class LocalDirHandle : public DirHandle {
+
+public:
+    struct dirent cur_entry;
+    XFINFO info;
+
+    LocalDirHandle() : cur_entry(), info() {
+    }
+
+    virtual int closedir() {
+        delete this;
+        return 0;
+    }
+
+    virtual struct dirent *readdir() {
+        if (xffind("*", &info)!=0) {
+            return NULL;
+        }
+        memcpy(cur_entry.d_name, info.name, sizeof(info.name));
+        return &cur_entry;
+    }
+
+    virtual void rewinddir() {
+        info.fileID = 0;
+    }
+
+    virtual off_t telldir() {
+        return info.fileID;
+    }
+
+    virtual void seekdir(off_t offset) {
+        info.fileID = offset;
+    }
+};
+
+FileHandle *LocalFileSystem::open(const char* name, int flags) {
+    /* reject filenames with / in them */
+    for (const char *tmp = name; *tmp; tmp++) {
+        if (*tmp == '/') {
+            return NULL;
+        }
+    }
+
+    int openmode = posix_to_semihost_open_flags(flags);
+    if (openmode == OPEN_INVALID) {
+        return NULL;
+    }
+
+    FILEHANDLE fh = semihost_open(name, openmode);
+    if (fh == -1) {
+        return NULL;
+    }
+    return new LocalFileHandle(fh);
+}
+
+int LocalFileSystem::remove(const char *filename) {
+    return semihost_remove(filename);
+}
+
+DirHandle *LocalFileSystem::opendir(const char *name) {
+    return new LocalDirHandle();
+}
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/RawSerial.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,70 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "RawSerial.h"
+#include "wait_api.h"
+#include <cstdarg>
+
+#if DEVICE_SERIAL
+
+#define STRING_STACK_LIMIT    120
+
+namespace mbed {
+
+RawSerial::RawSerial(PinName tx, PinName rx) : SerialBase(tx, rx) {
+}
+
+int RawSerial::getc() {
+    return _base_getc();
+}
+
+int RawSerial::putc(int c) {
+    return _base_putc(c);
+}
+
+int RawSerial::puts(const char *str) {
+    while (*str)
+        putc(*str ++);
+    return 0;
+}
+
+// Experimental support for printf in RawSerial. No Stream inheritance
+// means we can't call printf() directly, so we use sprintf() instead.
+// We only call malloc() for the sprintf() buffer if the buffer
+// length is above a certain threshold, otherwise we use just the stack.
+int RawSerial::printf(const char *format, ...) {
+    std::va_list arg;
+    va_start(arg, format);
+    // ARMCC microlib does not properly handle a size of 0.
+    // As a workaround supply a dummy buffer with a size of 1.
+    char dummy_buf[1];
+    int len = vsnprintf(dummy_buf, sizeof(dummy_buf), format, arg);
+    if (len < STRING_STACK_LIMIT) {
+        char temp[STRING_STACK_LIMIT];
+        vsprintf(temp, format, arg);
+        puts(temp);
+    } else {
+        char *temp = new char[len + 1];
+        vsprintf(temp, format, arg);
+        puts(temp);
+        delete[] temp;
+    }
+    va_end(arg);
+    return len;
+}
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/SPI.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,185 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "SPI.h"
+
+#if DEVICE_SPI
+
+namespace mbed {
+
+#if DEVICE_SPI_ASYNCH && TRANSACTION_QUEUE_SIZE_SPI
+CircularBuffer<Transaction<SPI>, TRANSACTION_QUEUE_SIZE_SPI> SPI::_transaction_buffer;
+#endif
+
+SPI::SPI(PinName mosi, PinName miso, PinName sclk, PinName ssel) :
+        _spi(),
+#if DEVICE_SPI_ASYNCH
+        _irq(this),
+        _usage(DMA_USAGE_NEVER),
+#endif
+        _bits(8),
+        _mode(0),
+        _hz(1000000) {
+    spi_init(&_spi, mosi, miso, sclk, ssel);
+    spi_format(&_spi, _bits, _mode, 0);
+    spi_frequency(&_spi, _hz);
+}
+
+void SPI::format(int bits, int mode) {
+    _bits = bits;
+    _mode = mode;
+    SPI::_owner = NULL; // Not that elegant, but works. rmeyer
+    aquire();
+}
+
+void SPI::frequency(int hz) {
+    _hz = hz;
+    SPI::_owner = NULL; // Not that elegant, but works. rmeyer
+    aquire();
+}
+
+SPI* SPI::_owner = NULL;
+
+// ignore the fact there are multiple physical spis, and always update if it wasnt us last
+void SPI::aquire() {
+     if (_owner != this) {
+        spi_format(&_spi, _bits, _mode, 0);
+        spi_frequency(&_spi, _hz);
+        _owner = this;
+    }
+}
+
+int SPI::write(int value) {
+    aquire();
+    return spi_master_write(&_spi, value);
+}
+
+#if DEVICE_SPI_ASYNCH
+
+int SPI::transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event)
+{
+    if (spi_active(&_spi)) {
+        return queue_transfer(tx_buffer, tx_length, rx_buffer, rx_length, bit_width, callback, event);
+    }
+    start_transfer(tx_buffer, tx_length, rx_buffer, rx_length, bit_width, callback, event);
+    return 0;
+}
+
+void SPI::abort_transfer()
+{
+    spi_abort_asynch(&_spi);
+#if TRANSACTION_QUEUE_SIZE_SPI
+    dequeue_transaction();
+#endif
+}
+
+
+void SPI::clear_transfer_buffer()
+{
+#if TRANSACTION_QUEUE_SIZE_SPI
+    _transaction_buffer.reset();
+#endif
+}
+
+void SPI::abort_all_transfers()
+{
+    clear_transfer_buffer();
+    abort_transfer();
+}
+
+int SPI::set_dma_usage(DMAUsage usage)
+{
+    if (spi_active(&_spi)) {
+        return -1;
+    }
+    _usage = usage;
+    return  0;
+}
+
+int SPI::queue_transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event)
+{
+#if TRANSACTION_QUEUE_SIZE_SPI
+    transaction_t t;
+
+    t.tx_buffer = const_cast<void *>(tx_buffer);
+    t.tx_length = tx_length;
+    t.rx_buffer = rx_buffer;
+    t.rx_length = rx_length;
+    t.event = event;
+    t.callback = callback;
+    t.width = bit_width;
+    Transaction<SPI> transaction(this, t);
+    if (_transaction_buffer.full()) {
+        return -1; // the buffer is full
+    } else {
+        __disable_irq();
+        _transaction_buffer.push(transaction);
+        if (!spi_active(&_spi)) {
+            dequeue_transaction();
+        }
+        __enable_irq();
+        return 0;
+    }
+#else
+    return -1;
+#endif
+}
+
+void SPI::start_transfer(const void *tx_buffer, int tx_length, void *rx_buffer, int rx_length, unsigned char bit_width, const event_callback_t& callback, int event)
+{
+    aquire();
+    _callback = callback;
+    _irq.callback(&SPI::irq_handler_asynch);
+    spi_master_transfer(&_spi, tx_buffer, tx_length, rx_buffer, rx_length, bit_width, _irq.entry(), event , _usage);
+}
+
+#if TRANSACTION_QUEUE_SIZE_SPI
+
+void SPI::start_transaction(transaction_t *data)
+{
+    start_transfer(data->tx_buffer, data->tx_length, data->rx_buffer, data->rx_length, data->width, data->callback, data->event);
+}
+
+void SPI::dequeue_transaction()
+{
+    Transaction<SPI> t;
+    if (_transaction_buffer.pop(t)) {
+        SPI* obj = t.get_object();
+        transaction_t* data = t.get_transaction();
+        obj->start_transaction(data);
+    }
+}
+
+#endif
+
+void SPI::irq_handler_asynch(void)
+{
+    int event = spi_irq_handler_asynch(&_spi);
+    if (_callback && (event & SPI_EVENT_ALL)) {
+        _callback.call(event & SPI_EVENT_ALL);
+    }
+#if TRANSACTION_QUEUE_SIZE_SPI
+    if (event & (SPI_EVENT_ALL | SPI_EVENT_INTERNAL_TRANSFER_COMPLETE)) {
+        // SPI peripheral is free (event happend), dequeue transaction
+        dequeue_transaction();
+    }
+#endif
+}
+
+#endif
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/SPISlave.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,58 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "SPISlave.h"
+
+#if DEVICE_SPISLAVE
+
+namespace mbed {
+
+SPISlave::SPISlave(PinName mosi, PinName miso, PinName sclk, PinName ssel) :
+    _spi(),
+    _bits(8),
+    _mode(0),
+    _hz(1000000)
+ {
+    spi_init(&_spi, mosi, miso, sclk, ssel);
+    spi_format(&_spi, _bits, _mode, 1);
+    spi_frequency(&_spi, _hz);
+}
+
+void SPISlave::format(int bits, int mode) {
+    _bits = bits;
+    _mode = mode;
+    spi_format(&_spi, _bits, _mode, 1);
+}
+
+void SPISlave::frequency(int hz) {
+    _hz = hz;
+    spi_frequency(&_spi, _hz);
+}
+
+int SPISlave::receive(void) {
+    return(spi_slave_receive(&_spi));
+}
+
+int SPISlave::read(void) {
+    return(spi_slave_read(&_spi));
+}
+
+void SPISlave::reply(int value) {
+    spi_slave_write(&_spi, value);
+}
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/Serial.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,36 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Serial.h"
+#include "wait_api.h"
+
+#if DEVICE_SERIAL
+
+namespace mbed {
+
+Serial::Serial(PinName tx, PinName rx, const char *name) : SerialBase(tx, rx), Stream(name) {
+}
+
+int Serial::_getc() {
+    return _base_getc();
+}
+
+int Serial::_putc(int c) {
+    return _base_putc(c);
+}
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/SerialBase.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,212 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "SerialBase.h"
+#include "wait_api.h"
+
+#if DEVICE_SERIAL
+
+namespace mbed {
+
+SerialBase::SerialBase(PinName tx, PinName rx) :
+#if DEVICE_SERIAL_ASYNCH
+                                                 _thunk_irq(this), _tx_usage(DMA_USAGE_NEVER),
+                                                 _rx_usage(DMA_USAGE_NEVER),
+#endif
+                                                _serial(), _baud(9600) {
+    serial_init(&_serial, tx, rx);
+    serial_irq_handler(&_serial, SerialBase::_irq_handler, (uint32_t)this);
+}
+
+void SerialBase::baud(int baudrate) {
+    serial_baud(&_serial, baudrate);
+    _baud = baudrate;
+}
+
+void SerialBase::format(int bits, Parity parity, int stop_bits) {
+    serial_format(&_serial, bits, (SerialParity)parity, stop_bits);
+}
+
+int SerialBase::readable() {
+    return serial_readable(&_serial);
+}
+
+
+int SerialBase::writeable() {
+    return serial_writable(&_serial);
+}
+
+void SerialBase::attach(void (*fptr)(void), IrqType type) {
+    if (fptr) {
+        _irq[type].attach(fptr);
+        serial_irq_set(&_serial, (SerialIrq)type, 1);
+    } else {
+        serial_irq_set(&_serial, (SerialIrq)type, 0);
+    }
+}
+
+void SerialBase::_irq_handler(uint32_t id, SerialIrq irq_type) {
+    SerialBase *handler = (SerialBase*)id;
+    handler->_irq[irq_type].call();
+}
+
+int SerialBase::_base_getc() {
+    return serial_getc(&_serial);
+}
+
+int SerialBase::_base_putc(int c) {
+    serial_putc(&_serial, c);
+    return c;
+}
+
+void SerialBase::send_break() {
+  // Wait for 1.5 frames before clearing the break condition
+  // This will have different effects on our platforms, but should
+  // ensure that we keep the break active for at least one frame.
+  // We consider a full frame (1 start bit + 8 data bits bits +
+  // 1 parity bit + 2 stop bits = 12 bits) for computation.
+  // One bit time (in us) = 1000000/_baud
+  // Twelve bits: 12000000/baud delay
+  // 1.5 frames: 18000000/baud delay
+  serial_break_set(&_serial);
+  wait_us(18000000/_baud);
+  serial_break_clear(&_serial);
+}
+
+#if DEVICE_SERIAL_FC
+void SerialBase::set_flow_control(Flow type, PinName flow1, PinName flow2) {
+    FlowControl flow_type = (FlowControl)type;
+    switch(type) {
+        case RTS:
+            serial_set_flow_control(&_serial, flow_type, flow1, NC);
+            break;
+
+        case CTS:
+            serial_set_flow_control(&_serial, flow_type, NC, flow1);
+            break;
+
+        case RTSCTS:
+        case Disabled:
+            serial_set_flow_control(&_serial, flow_type, flow1, flow2);
+            break;
+
+        default:
+            break;
+    }
+}
+#endif
+
+#if DEVICE_SERIAL_ASYNCH
+
+int SerialBase::write(const uint8_t *buffer, int length, const event_callback_t& callback, int event)
+{
+    if (serial_tx_active(&_serial)) {
+        return -1; // transaction ongoing
+    }
+    start_write((void *)buffer, length, 8, callback, event);
+    return 0;
+}
+
+int SerialBase::write(const uint16_t *buffer, int length, const event_callback_t& callback, int event)
+{
+    if (serial_tx_active(&_serial)) {
+        return -1; // transaction ongoing
+    }
+    start_write((void *)buffer, length, 16, callback, event);
+    return 0;
+}
+
+void SerialBase::start_write(const void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event)
+{
+    _tx_callback = callback;
+
+    _thunk_irq.callback(&SerialBase::interrupt_handler_asynch);
+    serial_tx_asynch(&_serial, buffer, buffer_size, buffer_width, _thunk_irq.entry(), event, _tx_usage);
+}
+
+void SerialBase::abort_write(void)
+{
+    serial_tx_abort_asynch(&_serial);
+}
+
+void SerialBase::abort_read(void)
+{
+    serial_rx_abort_asynch(&_serial);
+}
+
+int SerialBase::set_dma_usage_tx(DMAUsage usage)
+{
+    if (serial_tx_active(&_serial)) {
+        return -1;
+    }
+    _tx_usage = usage;
+    return 0;
+}
+
+int SerialBase::set_dma_usage_rx(DMAUsage usage)
+{
+    if (serial_tx_active(&_serial)) {
+        return -1;
+    }
+    _rx_usage = usage;
+    return 0;
+}
+
+int SerialBase::read(uint8_t *buffer, int length, const event_callback_t& callback, int event, unsigned char char_match)
+{
+    if (serial_rx_active(&_serial)) {
+        return -1; // transaction ongoing
+    }
+    start_read((void*)buffer, length, 8, callback, event, char_match);
+    return 0;
+}
+
+
+int SerialBase::read(uint16_t *buffer, int length, const event_callback_t& callback, int event, unsigned char char_match)
+{
+    if (serial_rx_active(&_serial)) {
+        return -1; // transaction ongoing
+    }
+    start_read((void*)buffer, length, 16, callback, event, char_match);
+    return 0;
+}
+
+
+void SerialBase::start_read(void *buffer, int buffer_size, char buffer_width, const event_callback_t& callback, int event, unsigned char char_match)
+{
+    _rx_callback = callback;
+    _thunk_irq.callback(&SerialBase::interrupt_handler_asynch);
+    serial_rx_asynch(&_serial, buffer, buffer_size, buffer_width, _thunk_irq.entry(), event, char_match, _rx_usage);
+}
+
+void SerialBase::interrupt_handler_asynch(void)
+{
+    int event = serial_irq_handler_asynch(&_serial);
+    int rx_event = event & SERIAL_EVENT_RX_MASK;
+    if (_rx_callback && rx_event) {
+        _rx_callback.call(rx_event);
+    }
+
+    int tx_event = event & SERIAL_EVENT_TX_MASK;
+    if (_tx_callback && tx_event) {
+        _tx_callback.call(tx_event);
+    }
+}
+
+#endif
+
+} // namespace mbed
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/Stream.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,121 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Stream.h"
+
+namespace mbed {
+
+Stream::Stream(const char *name) : FileLike(name), _file(NULL) {
+    /* open ourselves */
+    char buf[12]; /* :0x12345678 + null byte */
+    std::sprintf(buf, ":%p", this);
+    _file = std::fopen(buf, "w+");
+    mbed_set_unbuffered_stream(_file);
+}
+
+Stream::~Stream() {
+    fclose(_file);
+}
+
+int Stream::putc(int c) {
+    fflush(_file);
+    return std::fputc(c, _file);
+}
+int Stream::puts(const char *s) {
+    fflush(_file);
+    return std::fputs(s, _file);
+}
+int Stream::getc() {
+    fflush(_file);
+    return mbed_getc(_file);   
+}
+char* Stream::gets(char *s, int size) {
+    fflush(_file);
+    return mbed_gets(s,size,_file);
+}
+
+int Stream::close() {
+    return 0;
+}
+
+ssize_t Stream::write(const void* buffer, size_t length) {
+    const char* ptr = (const char*)buffer;
+    const char* end = ptr + length;
+    while (ptr != end) {
+        if (_putc(*ptr++) == EOF) {
+            break;
+        }
+    }
+    return ptr - (const char*)buffer;
+}
+
+ssize_t Stream::read(void* buffer, size_t length) {
+    char* ptr = (char*)buffer;
+    char* end = ptr + length;
+    while (ptr != end) {
+        int c = _getc();
+        if (c==EOF) break;
+        *ptr++ = c;
+    }
+    return ptr - (const char*)buffer;
+}
+
+off_t Stream::lseek(off_t offset, int whence) {
+    return 0;
+}
+
+int Stream::isatty() {
+    return 0;
+}
+
+int Stream::fsync() {
+    return 0;
+}
+
+off_t Stream::flen() {
+    return 0;
+}
+
+int Stream::printf(const char* format, ...) {
+    std::va_list arg;
+    va_start(arg, format);
+    fflush(_file);
+    int r = vfprintf(_file, format, arg);
+    va_end(arg);
+    return r;
+}
+
+int Stream::scanf(const char* format, ...) {
+    std::va_list arg;
+    va_start(arg, format);
+    fflush(_file);
+    int r = vfscanf(_file, format, arg);
+    va_end(arg);
+    return r;
+}
+
+int Stream::vprintf(const char* format, std::va_list args) {
+    fflush(_file);
+    int r = vfprintf(_file, format, args);
+    return r;
+}
+
+int Stream::vscanf(const char* format, std::va_list args) {
+    fflush(_file);
+    int r = vfscanf(_file, format, args);
+    return r;
+}
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/Ticker.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,40 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Ticker.h"
+
+#include "TimerEvent.h"
+#include "FunctionPointer.h"
+#include "ticker_api.h"
+
+namespace mbed {
+
+void Ticker::detach() {
+    remove();
+    _function.attach(0);
+}
+
+void Ticker::setup(timestamp_t t) {
+    remove();
+    _delay = t;
+    insert(_delay + ticker_read(_ticker_data));
+}
+
+void Ticker::handler() {
+    insert(event.timestamp + _delay);
+    _function.call();
+}
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/Timeout.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,24 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Timeout.h"
+
+namespace mbed {
+
+void Timeout::handler() {
+    _function.call();
+}
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/Timer.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,73 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Timer.h"
+#include "ticker_api.h"
+#include "us_ticker_api.h"
+
+namespace mbed {
+
+Timer::Timer() : _running(), _start(), _time(), _ticker_data(get_us_ticker_data()) {
+    reset();
+}
+
+Timer::Timer(const ticker_data_t *data) : _running(), _start(), _time(), _ticker_data(data) {
+    reset();
+}
+
+void Timer::start() {
+    if (!_running) {
+        _start = ticker_read(_ticker_data);
+        _running = 1;
+    }
+}
+
+void Timer::stop() {
+    _time += slicetime();
+    _running = 0;
+}
+
+int Timer::read_us() {
+    return _time + slicetime();
+}
+
+float Timer::read() {
+    return (float)read_us() / 1000000.0f;
+}
+
+int Timer::read_ms() {
+    return read_us() / 1000;
+}
+
+int Timer::slicetime() {
+    if (_running) {
+        return ticker_read(_ticker_data) - _start;
+    } else {
+        return 0;
+    }
+}
+
+void Timer::reset() {
+    _start = ticker_read(_ticker_data);
+    _time = 0;
+}
+
+#ifdef MBED_OPERATORS
+Timer::operator float() {
+    return read();
+}
+#endif
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/TimerEvent.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,51 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "TimerEvent.h"
+#include "cmsis.h"
+
+#include <stddef.h>
+#include "ticker_api.h"
+#include "us_ticker_api.h"
+
+namespace mbed {
+
+TimerEvent::TimerEvent() : event(), _ticker_data(get_us_ticker_data()) {
+    ticker_set_handler(_ticker_data, (&TimerEvent::irq));
+}
+
+TimerEvent::TimerEvent(const ticker_data_t *data) : event(), _ticker_data(data) {
+    ticker_set_handler(_ticker_data, (&TimerEvent::irq));
+}
+
+void TimerEvent::irq(uint32_t id) {
+    TimerEvent *timer_event = (TimerEvent*)id;
+    timer_event->handler();
+}
+
+TimerEvent::~TimerEvent() {
+    remove();
+}
+
+// insert in to linked list
+void TimerEvent::insert(timestamp_t timestamp) {
+    ticker_insert_event(_ticker_data, &event, timestamp, (uint32_t)this);
+}
+
+void TimerEvent::remove() {
+    ticker_remove_event(_ticker_data, &event);
+}
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/assert.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,22 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "mbed_assert.h"
+#include "mbed_error.h"
+
+void mbed_assert_internal(const char *expr, const char *file, int line)
+{
+    error("mbed assertation failed: %s, file: %s, line %d \n", expr, file, line);
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/board.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,59 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "gpio_api.h"
+#include "wait_api.h"
+#include "toolchain.h"
+#include "mbed_interface.h"
+
+WEAK void mbed_die(void) {
+#if !defined (NRF51_H) && !defined(TARGET_EFM32)
+	__disable_irq();	// dont allow interrupts to disturb the flash pattern
+#endif
+#if   (DEVICE_ERROR_RED == 1)
+    gpio_t led_red; gpio_init_out(&led_red, LED_RED);
+#elif (DEVICE_ERROR_PATTERN == 1)
+    gpio_t led_1; gpio_init_out(&led_1, LED1);
+    gpio_t led_2; gpio_init_out(&led_2, LED2);
+    gpio_t led_3; gpio_init_out(&led_3, LED3);
+    gpio_t led_4; gpio_init_out(&led_4, LED4);
+#endif
+
+    while (1) {
+#if   (DEVICE_ERROR_RED == 1)
+        gpio_write(&led_red, 1);
+
+#elif (DEVICE_ERROR_PATTERN == 1)
+        gpio_write(&led_1, 1);
+        gpio_write(&led_2, 0);
+        gpio_write(&led_3, 0);
+        gpio_write(&led_4, 1);
+#endif
+
+        wait_ms(150);
+
+#if   (DEVICE_ERROR_RED == 1)
+        gpio_write(&led_red, 0);
+
+#elif (DEVICE_ERROR_PATTERN == 1)
+        gpio_write(&led_1, 0);
+        gpio_write(&led_2, 1);
+        gpio_write(&led_3, 1);
+        gpio_write(&led_4, 0);
+#endif
+
+        wait_ms(150);
+    }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/error.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,33 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <stdlib.h>
+#include <stdarg.h>
+#include "device.h"
+#include "toolchain.h"
+#include "mbed_error.h"
+#if DEVICE_STDIO_MESSAGES
+#include <stdio.h>
+#endif
+
+WEAK void error(const char* format, ...) {
+#if DEVICE_STDIO_MESSAGES
+    va_list arg;
+    va_start(arg, format);
+    vfprintf(stderr, format, arg);
+    va_end(arg);
+#endif
+    exit(1);
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/gpio.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,61 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "gpio_api.h"
+
+static inline void _gpio_init_in(gpio_t* gpio, PinName pin, PinMode mode)
+{
+    gpio_init(gpio, pin);
+    if (pin != NC) {
+        gpio_dir(gpio, PIN_INPUT);
+        gpio_mode(gpio, mode);
+    }
+}
+
+static inline void _gpio_init_out(gpio_t* gpio, PinName pin, PinMode mode, int value)
+{
+    gpio_init(gpio, pin);
+    if (pin != NC) {
+        gpio_write(gpio, value);
+        gpio_dir(gpio, PIN_OUTPUT);
+        gpio_mode(gpio, mode);
+    }
+}
+
+void gpio_init_in(gpio_t* gpio, PinName pin) {
+    gpio_init_in_ex(gpio, pin, PullDefault);
+}
+
+void gpio_init_in_ex(gpio_t* gpio, PinName pin, PinMode mode) {
+    _gpio_init_in(gpio, pin, mode);
+}
+
+void gpio_init_out(gpio_t* gpio, PinName pin) {
+    gpio_init_out_ex(gpio, pin, 0);
+}
+
+void gpio_init_out_ex(gpio_t* gpio, PinName pin, int value) {
+    _gpio_init_out(gpio, pin, PullNone, value);
+}
+
+void gpio_init_inout(gpio_t* gpio, PinName pin, PinDirection direction, PinMode mode, int value) {
+    if (direction == PIN_INPUT) {
+        _gpio_init_in(gpio, pin, mode);
+        if (pin != NC)
+            gpio_write(gpio, value); // we prepare the value in case it is switched later
+    } else {
+        _gpio_init_out(gpio, pin, mode, value);
+    }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/lp_ticker_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,45 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "lp_ticker_api.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+static ticker_event_queue_t events;
+
+static const ticker_interface_t lp_interface = {
+    .init = lp_ticker_init,
+    .read = lp_ticker_read,
+    .disable_interrupt = lp_ticker_disable_interrupt,
+    .clear_interrupt = lp_ticker_clear_interrupt,
+    .set_interrupt = lp_ticker_set_interrupt,
+};
+
+static const ticker_data_t lp_data = {
+    .interface = &lp_interface,
+    .queue = &events,
+};
+
+const ticker_data_t* get_lp_ticker_data(void)
+{
+    return &lp_data;
+}
+
+void lp_ticker_irq_handler(void)
+{
+    ticker_irq_handler(&lp_data);
+}
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/mbed_interface.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,113 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <stdio.h>
+#include "mbed_interface.h"
+
+#include "gpio_api.h"
+#include "wait_api.h"
+#include "semihost_api.h"
+#include "mbed_error.h"
+#include "toolchain.h"
+
+#if DEVICE_SEMIHOST
+
+// return true if a debugger is attached, indicating mbed interface is connected
+int mbed_interface_connected(void) {
+    return semihost_connected();
+}
+
+int mbed_interface_reset(void) {
+    if (mbed_interface_connected()) {
+        semihost_reset();
+        return 0;
+    } else {
+        return -1;
+    }
+}
+
+WEAK int mbed_interface_uid(char *uid) {
+    if (mbed_interface_connected()) {
+        return semihost_uid(uid); // Returns 0 if successful, -1 on failure
+    } else {
+        uid[0] = 0;
+        return -1;
+    }
+}
+
+int mbed_interface_disconnect(void) {
+    int res;
+    if (mbed_interface_connected()) {
+        if ((res = semihost_disabledebug()) != 0)
+            return res;
+        while (mbed_interface_connected());
+        return 0;
+    } else {
+        return -1;
+    }
+}
+
+int mbed_interface_powerdown(void) {
+    int res;
+    if (mbed_interface_connected()) {
+        if ((res = semihost_powerdown()) != 0)
+            return res;
+        while (mbed_interface_connected());
+        return 0;
+    } else {
+        return -1;
+    }
+}
+
+// for backward compatibility
+void mbed_reset(void) {
+    mbed_interface_reset();
+}
+
+WEAK int mbed_uid(char *uid) {
+    return mbed_interface_uid(uid);
+}
+#endif
+
+WEAK void mbed_mac_address(char *mac) {
+#if DEVICE_SEMIHOST
+    char uid[DEVICE_ID_LENGTH + 1];
+    int i;
+
+    // if we have a UID, extract the MAC
+    if (mbed_interface_uid(uid) == 0) {
+        char *p = uid;
+#if defined(DEVICE_MAC_OFFSET)
+        p += DEVICE_MAC_OFFSET;
+#endif
+        for (i=0; i<6; i++) {
+            int byte;
+            sscanf(p, "%2x", &byte);
+            mac[i] = byte;
+            p += 2;
+        }
+        mac[0] &= ~0x01;    // reset the IG bit in the address; see IEE 802.3-2002, Section 3.2.3(b)
+    } else {  // else return a default MAC
+#endif
+        mac[0] = 0x00;
+        mac[1] = 0x02;
+        mac[2] = 0xF7;
+        mac[3] = 0xF0;
+        mac[4] = 0x00;
+        mac[5] = 0x00;
+#if DEVICE_SEMIHOST
+    }
+#endif
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/pinmap_common.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,89 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "pinmap.h"
+#include "mbed_error.h"
+
+void pinmap_pinout(PinName pin, const PinMap *map) {
+    if (pin == NC)
+        return;
+
+    while (map->pin != NC) {
+        if (map->pin == pin) {
+            pin_function(pin, map->function);
+
+            pin_mode(pin, PullNone);
+            return;
+        }
+        map++;
+    }
+    error("could not pinout");
+}
+
+uint32_t pinmap_merge(uint32_t a, uint32_t b) {
+    // both are the same (inc both NC)
+    if (a == b)
+        return a;
+
+    // one (or both) is not connected
+    if (a == (uint32_t)NC)
+        return b;
+    if (b == (uint32_t)NC)
+        return a;
+
+    // mis-match error case
+    error("pinmap mis-match");
+    return (uint32_t)NC;
+}
+
+uint32_t pinmap_find_peripheral(PinName pin, const PinMap* map) {
+    while (map->pin != NC) {
+        if (map->pin == pin)
+            return map->peripheral;
+        map++;
+    }
+    return (uint32_t)NC;
+}
+
+uint32_t pinmap_peripheral(PinName pin, const PinMap* map) {
+    uint32_t peripheral = (uint32_t)NC;
+
+    if (pin == (PinName)NC)
+        return (uint32_t)NC;
+    peripheral = pinmap_find_peripheral(pin, map);
+    if ((uint32_t)NC == peripheral) // no mapping available
+        error("pinmap not found for peripheral");
+    return peripheral;
+}
+
+uint32_t pinmap_find_function(PinName pin, const PinMap* map) {
+    while (map->pin != NC) {
+        if (map->pin == pin)
+            return map->function;
+        map++;
+    }
+    return (uint32_t)NC;
+}
+
+uint32_t pinmap_function(PinName pin, const PinMap* map) {
+    uint32_t function = (uint32_t)NC;
+
+    if (pin == (PinName)NC)
+        return (uint32_t)NC;
+    function = pinmap_find_function(pin, map);
+    if ((uint32_t)NC == function) // no mapping available
+        error("pinmap not found for function");
+    return function;
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/retarget.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,568 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "platform.h"
+#include "FileHandle.h"
+#include "FileSystemLike.h"
+#include "FilePath.h"
+#include "serial_api.h"
+#include "toolchain.h"
+#include "semihost_api.h"
+#include "mbed_interface.h"
+#if DEVICE_STDIO_MESSAGES
+#include <stdio.h>
+#endif
+#include <errno.h>
+
+#if defined(__ARMCC_VERSION)
+#   include <rt_sys.h>
+#   define PREFIX(x)    _sys##x
+#   define OPEN_MAX     _SYS_OPEN
+#   ifdef __MICROLIB
+#       pragma import(__use_full_stdio)
+#   endif
+
+#elif defined(__ICCARM__)
+#   include <yfuns.h>
+#   define PREFIX(x)        _##x
+#   define OPEN_MAX         16
+
+#   define STDIN_FILENO     0
+#   define STDOUT_FILENO    1
+#   define STDERR_FILENO    2
+
+#else
+#   include <sys/stat.h>
+#   include <sys/unistd.h>
+#   include <sys/syslimits.h>
+#   define PREFIX(x)    x
+#endif
+
+using namespace mbed;
+
+#if defined(__MICROLIB) && (__ARMCC_VERSION>5030000)
+// Before version 5.03, we were using a patched version of microlib with proper names
+extern const char __stdin_name[]  = ":tt";
+extern const char __stdout_name[] = ":tt";
+extern const char __stderr_name[] = ":tt";
+
+#else
+extern const char __stdin_name[]  = "/stdin";
+extern const char __stdout_name[] = "/stdout";
+extern const char __stderr_name[] = "/stderr";
+#endif
+
+/* newlib has the filehandle field in the FILE struct as a short, so
+ * we can't just return a Filehandle* from _open and instead have to
+ * put it in a filehandles array and return the index into that array
+ * (or rather index+3, as filehandles 0-2 are stdin/out/err).
+ */
+static FileHandle *filehandles[OPEN_MAX];
+
+FileHandle::~FileHandle() {
+    /* Remove all open filehandles for this */
+    for (unsigned int fh_i = 0; fh_i < sizeof(filehandles)/sizeof(*filehandles); fh_i++) {
+        if (filehandles[fh_i] == this) {
+            filehandles[fh_i] = NULL;
+        }
+    }
+}
+
+#if DEVICE_SERIAL
+extern int stdio_uart_inited;
+extern serial_t stdio_uart;
+#endif
+
+static void init_serial() {
+#if DEVICE_SERIAL
+    if (stdio_uart_inited) return;
+    serial_init(&stdio_uart, STDIO_UART_TX, STDIO_UART_RX);
+#endif
+}
+
+static inline int openmode_to_posix(int openmode) {
+    int posix = openmode;
+#ifdef __ARMCC_VERSION
+    if (openmode & OPEN_PLUS) {
+        posix = O_RDWR;
+    } else if(openmode & OPEN_W) {
+        posix = O_WRONLY;
+    } else if(openmode & OPEN_A) {
+        posix = O_WRONLY|O_APPEND;
+    } else {
+        posix = O_RDONLY;
+    }
+    /* a, w, a+, w+ all create if file does not already exist */
+    if (openmode & (OPEN_A|OPEN_W)) {
+        posix |= O_CREAT;
+    }
+    /* w and w+ truncate */
+    if (openmode & OPEN_W) {
+        posix |= O_TRUNC;
+    }
+#elif defined(__ICCARM__)
+    switch (openmode & _LLIO_RDWRMASK) {
+        case _LLIO_RDONLY: posix = O_RDONLY; break;
+        case _LLIO_WRONLY: posix = O_WRONLY; break;
+        case _LLIO_RDWR  : posix = O_RDWR  ; break;
+    }
+    if (openmode & _LLIO_CREAT ) posix |= O_CREAT;
+    if (openmode & _LLIO_APPEND) posix |= O_APPEND;
+    if (openmode & _LLIO_TRUNC ) posix |= O_TRUNC;
+#elif defined(TOOLCHAIN_GCC)
+    posix &= ~O_BINARY;
+#endif
+    return posix;
+}
+
+extern "C" FILEHANDLE PREFIX(_open)(const char* name, int openmode) {
+    #if defined(__MICROLIB) && (__ARMCC_VERSION>5030000)
+    // Before version 5.03, we were using a patched version of microlib with proper names
+    // This is the workaround that the microlib author suggested us
+    static int n = 0;
+    if (!std::strcmp(name, ":tt")) return n++;
+
+    #else
+    /* Use the posix convention that stdin,out,err are filehandles 0,1,2.
+     */
+    if (std::strcmp(name, __stdin_name) == 0) {
+        init_serial();
+        return 0;
+    } else if (std::strcmp(name, __stdout_name) == 0) {
+        init_serial();
+        return 1;
+    } else if (std::strcmp(name, __stderr_name) == 0) {
+        init_serial();
+        return 2;
+    }
+    #endif
+
+    // find the first empty slot in filehandles
+    unsigned int fh_i;
+    for (fh_i = 0; fh_i < sizeof(filehandles)/sizeof(*filehandles); fh_i++) {
+        if (filehandles[fh_i] == NULL) break;
+    }
+    if (fh_i >= sizeof(filehandles)/sizeof(*filehandles)) {
+        return -1;
+    }
+
+    FileHandle *res;
+
+    /* FILENAME: ":0x12345678" describes a FileLike* */
+    if (name[0] == ':') {
+        void *p;
+        sscanf(name, ":%p", &p);
+        res = (FileHandle*)p;
+
+    /* FILENAME: "/file_system/file_name" */
+    } else {
+        FilePath path(name);
+
+        if (!path.exists())
+            return -1;
+        else if (path.isFile()) {
+            res = path.file();
+        } else {
+            FileSystemLike *fs = path.fileSystem();
+            if (fs == NULL) return -1;
+            int posix_mode = openmode_to_posix(openmode);
+            res = fs->open(path.fileName(), posix_mode); /* NULL if fails */
+        }
+    }
+
+    if (res == NULL) return -1;
+    filehandles[fh_i] = res;
+
+    return fh_i + 3; // +3 as filehandles 0-2 are stdin/out/err
+}
+
+extern "C" int PREFIX(_close)(FILEHANDLE fh) {
+    if (fh < 3) return 0;
+
+    FileHandle* fhc = filehandles[fh-3];
+    filehandles[fh-3] = NULL;
+    if (fhc == NULL) return -1;
+
+    return fhc->close();
+}
+
+#if defined(__ICCARM__)
+extern "C" size_t    __write (int        fh, const unsigned char *buffer, size_t length) {
+#else
+extern "C" int PREFIX(_write)(FILEHANDLE fh, const unsigned char *buffer, unsigned int length, int mode) {
+#endif
+    int n; // n is the number of bytes written
+    if (fh < 3) {
+#if DEVICE_SERIAL
+        if (!stdio_uart_inited) init_serial();
+        for (unsigned int i = 0; i < length; i++) {
+            serial_putc(&stdio_uart, buffer[i]);
+        }
+#endif
+        n = length;
+    } else {
+        FileHandle* fhc = filehandles[fh-3];
+        if (fhc == NULL) return -1;
+
+        n = fhc->write(buffer, length);
+    }
+#ifdef __ARMCC_VERSION
+    return length-n;
+#else
+    return n;
+#endif
+}
+
+#if defined(__ICCARM__)
+extern "C" size_t    __read (int        fh, unsigned char *buffer, size_t       length) {
+#else
+extern "C" int PREFIX(_read)(FILEHANDLE fh, unsigned char *buffer, unsigned int length, int mode) {
+#endif
+    int n; // n is the number of bytes read
+    if (fh < 3) {
+        // only read a character at a time from stdin
+#if DEVICE_SERIAL
+        if (!stdio_uart_inited) init_serial();
+        *buffer = serial_getc(&stdio_uart);
+#endif
+        n = 1;
+    } else {
+        FileHandle* fhc = filehandles[fh-3];
+        if (fhc == NULL) return -1;
+
+        n = fhc->read(buffer, length);
+    }
+#ifdef __ARMCC_VERSION
+    return length-n;
+#else
+    return n;
+#endif
+}
+
+#ifdef __ARMCC_VERSION
+extern "C" int PREFIX(_istty)(FILEHANDLE fh)
+#else
+extern "C" int _isatty(FILEHANDLE fh)
+#endif
+{
+    /* stdin, stdout and stderr should be tty */
+    if (fh < 3) return 1;
+
+    FileHandle* fhc = filehandles[fh-3];
+    if (fhc == NULL) return -1;
+
+    return fhc->isatty();
+}
+
+extern "C"
+#if defined(__ARMCC_VERSION)
+int _sys_seek(FILEHANDLE fh, long position)
+#elif defined(__ICCARM__)
+long __lseek(int fh, long offset, int whence)
+#else
+int _lseek(FILEHANDLE fh, int offset, int whence)
+#endif
+{
+    if (fh < 3) return 0;
+
+    FileHandle* fhc = filehandles[fh-3];
+    if (fhc == NULL) return -1;
+
+#if defined(__ARMCC_VERSION)
+    return fhc->lseek(position, SEEK_SET);
+#else
+    return fhc->lseek(offset, whence);
+#endif
+}
+
+#ifdef __ARMCC_VERSION
+extern "C" int PREFIX(_ensure)(FILEHANDLE fh) {
+    if (fh < 3) return 0;
+
+    FileHandle* fhc = filehandles[fh-3];
+    if (fhc == NULL) return -1;
+
+    return fhc->fsync();
+}
+
+extern "C" long PREFIX(_flen)(FILEHANDLE fh) {
+    if (fh < 3) return 0;
+
+    FileHandle* fhc = filehandles[fh-3];
+    if (fhc == NULL) return -1;
+
+    return fhc->flen();
+}
+#endif
+
+
+#if !defined(__ARMCC_VERSION) && !defined(__ICCARM__)
+extern "C" int _fstat(int fd, struct stat *st) {
+    if ((STDOUT_FILENO == fd) || (STDERR_FILENO == fd) || (STDIN_FILENO == fd)) {
+        st->st_mode = S_IFCHR;
+        return  0;
+    }
+
+    errno = EBADF;
+    return -1;
+}
+#endif
+
+namespace std {
+extern "C" int remove(const char *path) {
+    FilePath fp(path);
+    FileSystemLike *fs = fp.fileSystem();
+    if (fs == NULL) return -1;
+
+    return fs->remove(fp.fileName());
+}
+
+extern "C" int rename(const char *oldname, const char *newname) {
+    FilePath fpOld(oldname);
+    FilePath fpNew(newname);
+    FileSystemLike *fsOld = fpOld.fileSystem();
+    FileSystemLike *fsNew = fpNew.fileSystem();
+
+    /* rename only if both files are on the same FS */
+    if (fsOld != fsNew || fsOld == NULL) return -1;
+
+    return fsOld->rename(fpOld.fileName(), fpNew.fileName());
+}
+
+extern "C" char *tmpnam(char *s) {
+    return NULL;
+}
+
+extern "C" FILE *tmpfile() {
+    return NULL;
+}
+} // namespace std
+
+#ifdef __ARMCC_VERSION
+extern "C" char *_sys_command_string(char *cmd, int len) {
+    return NULL;
+}
+#endif
+
+extern "C" DIR *opendir(const char *path) {
+    /* root dir is FileSystemLike */
+    if (path[0] == '/' && path[1] == 0) {
+        return FileSystemLike::opendir();
+    }
+
+    FilePath fp(path);
+    FileSystemLike* fs = fp.fileSystem();
+    if (fs == NULL) return NULL;
+
+    return fs->opendir(fp.fileName());
+}
+
+extern "C" struct dirent *readdir(DIR *dir) {
+    return dir->readdir();
+}
+
+extern "C" int closedir(DIR *dir) {
+    return dir->closedir();
+}
+
+extern "C" void rewinddir(DIR *dir) {
+    dir->rewinddir();
+}
+
+extern "C" off_t telldir(DIR *dir) {
+    return dir->telldir();
+}
+
+extern "C" void seekdir(DIR *dir, off_t off) {
+    dir->seekdir(off);
+}
+
+extern "C" int mkdir(const char *path, mode_t mode) {
+    FilePath fp(path);
+    FileSystemLike *fs = fp.fileSystem();
+    if (fs == NULL) return -1;
+
+    return fs->mkdir(fp.fileName(), mode);
+}
+
+#if defined(TOOLCHAIN_GCC)
+/* prevents the exception handling name demangling code getting pulled in */
+#include "mbed_error.h"
+namespace __gnu_cxx {
+    void __verbose_terminate_handler() {
+        error("Exception");
+    }
+}
+extern "C" WEAK void __cxa_pure_virtual(void);
+extern "C" WEAK void __cxa_pure_virtual(void) {
+    exit(1);
+}
+
+#endif
+
+// ****************************************************************************
+// mbed_main is a function that is called before main()
+// mbed_sdk_init() is also a function that is called before main(), but unlike
+// mbed_main(), it is not meant for user code, but for the SDK itself to perform
+// initializations before main() is called.
+
+extern "C" WEAK void mbed_main(void);
+extern "C" WEAK void mbed_main(void) {
+}
+
+extern "C" WEAK void mbed_sdk_init(void);
+extern "C" WEAK void mbed_sdk_init(void) {
+}
+
+#if defined(TOOLCHAIN_ARM)
+extern "C" int $Super$$main(void);
+
+extern "C" int $Sub$$main(void) {
+    mbed_sdk_init();
+    mbed_main();
+    return $Super$$main();
+}
+#elif defined(TOOLCHAIN_GCC)
+extern "C" int __real_main(void);
+
+extern "C" int __wrap_main(void) {
+    mbed_sdk_init();
+    mbed_main();
+    return __real_main();
+}
+#elif defined(TOOLCHAIN_IAR)
+// IAR doesn't have the $Super/$Sub mechanism of armcc, nor something equivalent
+// to ld's --wrap. It does have a --redirect, but that doesn't help, since redirecting
+// 'main' to another symbol looses the original 'main' symbol. However, its startup
+// code will call a function to setup argc and argv (__iar_argc_argv) if it is defined.
+// Since mbed doesn't use argc/argv, we use this function to call our mbed_main.
+extern "C" void __iar_argc_argv() {
+    mbed_sdk_init();
+    mbed_main();
+}
+#endif
+
+// Provide implementation of _sbrk (low-level dynamic memory allocation
+// routine) for GCC_ARM which compares new heap pointer with MSP instead of
+// SP.  This make it compatible with RTX RTOS thread stacks.
+#if defined(TOOLCHAIN_GCC_ARM)
+// Linker defined symbol used by _sbrk to indicate where heap should start.
+extern "C" int __end__;
+
+#if defined(TARGET_CORTEX_A)
+extern "C" uint32_t  __HeapLimit;
+#endif
+
+// Turn off the errno macro and use actual global variable instead.
+#undef errno
+extern "C" int errno;
+
+// For ARM7 only
+register unsigned char * stack_ptr __asm ("sp");
+
+// Dynamic memory allocation related syscall.
+extern "C" caddr_t _sbrk(int incr) {
+    static unsigned char* heap = (unsigned char*)&__end__;
+    unsigned char*        prev_heap = heap;
+    unsigned char*        new_heap = heap + incr;
+
+#if defined(TARGET_ARM7)
+    if (new_heap >= stack_ptr) {
+#elif defined(TARGET_CORTEX_A)
+    if (new_heap >= (unsigned char*)&__HeapLimit) {     /* __HeapLimit is end of heap section */
+#else
+    if (new_heap >= (unsigned char*)__get_MSP()) {
+#endif
+        errno = ENOMEM;
+        return (caddr_t)-1;
+    }
+
+    heap = new_heap;
+    return (caddr_t) prev_heap;
+}
+#endif
+
+
+#if defined TOOLCHAIN_GCC_ARM
+extern "C" void _exit(int return_code) {
+#else
+namespace std {
+extern "C" void exit(int return_code) {
+#endif
+
+#if DEVICE_STDIO_MESSAGES
+    fflush(stdout);
+    fflush(stderr);
+#endif
+
+#if DEVICE_SEMIHOST
+    if (mbed_interface_connected()) {
+        semihost_exit();
+    }
+#endif
+    if (return_code) {
+        mbed_die();
+    }
+
+    while (1);
+}
+
+#if !defined(TOOLCHAIN_GCC_ARM)
+} //namespace std
+#endif
+
+
+namespace mbed {
+
+void mbed_set_unbuffered_stream(FILE *_file) {
+#if defined (__ICCARM__)
+    char buf[2];
+    std::setvbuf(_file,buf,_IONBF,NULL);    
+#else
+    setbuf(_file, NULL);
+#endif
+}
+
+int mbed_getc(FILE *_file){
+#if defined (__ICCARM__)
+    /*This is only valid for unbuffered streams*/
+    int res = std::fgetc(_file);
+    if (res>=0){
+        _file->_Mode = (unsigned short)(_file->_Mode & ~ 0x1000);/* Unset read mode */
+        _file->_Rend = _file->_Wend;
+        _file->_Next = _file->_Wend;
+    }    
+    return res;
+#else    
+    return std::fgetc(_file);
+#endif   
+}
+
+char* mbed_gets(char*s, int size, FILE *_file){
+#if defined (__ICCARM__)
+    /*This is only valid for unbuffered streams*/
+    char *str = fgets(s,size,_file);
+    if (str!=NULL){
+        _file->_Mode = (unsigned short)(_file->_Mode & ~ 0x1000);/* Unset read mode */
+        _file->_Rend = _file->_Wend;
+        _file->_Next = _file->_Wend;
+    }
+    return str;
+#else    
+    return std::fgets(s,size,_file);
+#endif
+}
+
+} // namespace mbed

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/rtc_time.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,89 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "rtc_api.h"
+
+#include <time.h>
+#include "rtc_time.h"
+#include "us_ticker_api.h"
+
+#if DEVICE_RTC
+static void (*_rtc_init)(void) = rtc_init;
+static int (*_rtc_isenabled)(void) = rtc_isenabled;
+static time_t (*_rtc_read)(void) = rtc_read;
+static void (*_rtc_write)(time_t t) = rtc_write;
+#else
+static void (*_rtc_init)(void) = NULL;
+static int (*_rtc_isenabled)(void) = NULL;
+static time_t (*_rtc_read)(void) = NULL;
+static void (*_rtc_write)(time_t t) = NULL;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+#if defined (__ICCARM__)
+time_t __time32(time_t *timer)
+#else
+time_t time(time_t *timer)
+#endif
+
+{
+    if (_rtc_isenabled != NULL) {
+        if (!(_rtc_isenabled())) {
+            set_time(0);
+        }
+    }
+    
+    time_t t = 0;
+    if (_rtc_read != NULL) {
+        t = _rtc_read();
+    }
+
+    if (timer != NULL) {
+        *timer = t;
+    }
+    return t;
+}
+
+void set_time(time_t t) {
+    if (_rtc_init != NULL) {
+        _rtc_init();
+    }
+    if (_rtc_write != NULL) {
+        _rtc_write(t);
+    }
+}
+
+clock_t clock() {
+    clock_t t = us_ticker_read();
+    t /= 1000000 / CLOCKS_PER_SEC; // convert to processor time
+    return t;
+}
+
+void attach_rtc(time_t (*read_rtc)(void), void (*write_rtc)(time_t), void (*init_rtc)(void), int (*isenabled_rtc)(void)) {
+    __disable_irq();
+    _rtc_read = read_rtc;
+    _rtc_write = write_rtc;
+    _rtc_init = init_rtc;
+    _rtc_isenabled = isenabled_rtc;
+    __enable_irq();
+}
+
+
+
+#ifdef __cplusplus
+}
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/semihost_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,162 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "cmsis.h"
+#include "semihost_api.h"
+
+#include <stdint.h>
+#include <string.h>
+
+#if DEVICE_SEMIHOST
+
+// ARM Semihosting Commands
+#define SYS_OPEN   (0x1)
+#define SYS_CLOSE  (0x2)
+#define SYS_WRITE  (0x5)
+#define SYS_READ   (0x6)
+#define SYS_ISTTY  (0x9)
+#define SYS_SEEK   (0xa)
+#define SYS_ENSURE (0xb)
+#define SYS_FLEN   (0xc)
+#define SYS_REMOVE (0xe)
+#define SYS_RENAME (0xf)
+#define SYS_EXIT   (0x18)
+
+// mbed Semihosting Commands
+#define RESERVED_FOR_USER_APPLICATIONS (0x100) // 0x100 - 0x1ff
+#define USR_XFFIND      (RESERVED_FOR_USER_APPLICATIONS + 0)
+#define USR_UID      (RESERVED_FOR_USER_APPLICATIONS + 1)
+#define USR_RESET     (RESERVED_FOR_USER_APPLICATIONS + 2)
+#define USR_VBUS     (RESERVED_FOR_USER_APPLICATIONS + 3)
+#define USR_POWERDOWN     (RESERVED_FOR_USER_APPLICATIONS + 4)
+#define USR_DISABLEDEBUG (RESERVED_FOR_USER_APPLICATIONS + 5)
+
+#if DEVICE_LOCALFILESYSTEM
+FILEHANDLE semihost_open(const char* name, int openmode) {
+    uint32_t args[3];
+    args[0] = (uint32_t)name;
+    args[1] = (uint32_t)openmode;
+    args[2] = (uint32_t)strlen(name);
+    return __semihost(SYS_OPEN, args);
+}
+
+int semihost_close(FILEHANDLE fh) {
+    return __semihost(SYS_CLOSE, &fh);
+}
+
+int semihost_write(FILEHANDLE fh, const unsigned char* buffer, unsigned int length, int mode) {
+    if (length == 0) return 0;
+
+    uint32_t args[3];
+    args[0] = (uint32_t)fh;
+    args[1] = (uint32_t)buffer;
+    args[2] = (uint32_t)length;
+    return __semihost(SYS_WRITE, args);
+}
+
+int semihost_read(FILEHANDLE fh, unsigned char* buffer, unsigned int length, int mode) {
+    uint32_t args[3];
+    args[0] = (uint32_t)fh;
+    args[1] = (uint32_t)buffer;
+    args[2] = (uint32_t)length;
+    return __semihost(SYS_READ, args);
+}
+
+int semihost_istty(FILEHANDLE fh) {
+    return __semihost(SYS_ISTTY, &fh);
+}
+
+int semihost_seek(FILEHANDLE fh, long position) {
+    uint32_t args[2];
+    args[0] = (uint32_t)fh;
+    args[1] = (uint32_t)position;
+    return __semihost(SYS_SEEK, args);
+}
+
+int semihost_ensure(FILEHANDLE fh) {
+    return __semihost(SYS_ENSURE, &fh);
+}
+
+long semihost_flen(FILEHANDLE fh) {
+    return __semihost(SYS_FLEN, &fh);
+}
+
+int semihost_remove(const char *name) {
+    uint32_t args[2];
+    args[0] = (uint32_t)name;
+    args[1] = (uint32_t)strlen(name);
+    return __semihost(SYS_REMOVE, args);
+}
+
+int semihost_rename(const char *old_name, const char *new_name) {
+    uint32_t args[4];
+    args[0] = (uint32_t)old_name;
+    args[1] = (uint32_t)strlen(old_name);
+    args[0] = (uint32_t)new_name;
+    args[1] = (uint32_t)strlen(new_name);
+    return __semihost(SYS_RENAME, args);
+}
+#endif
+
+int semihost_exit(void) {
+    uint32_t args[4];
+    return __semihost(SYS_EXIT, args);
+}
+
+int semihost_uid(char *uid) {
+    uint32_t args[2];
+    args[0] = (uint32_t)uid;
+    args[1] = DEVICE_ID_LENGTH + 1;
+    return __semihost(USR_UID, &args);
+}
+
+int semihost_reset(void) {
+    // Does not normally return, however if used with older firmware versions
+    // that do not support this call it will return -1.
+    return __semihost(USR_RESET, NULL);
+}
+
+int semihost_vbus(void) {
+    return __semihost(USR_VBUS, NULL);
+}
+
+int semihost_powerdown(void) {
+    return __semihost(USR_POWERDOWN, NULL);
+}
+
+#if DEVICE_DEBUG_AWARENESS
+
+int semihost_connected(void) {
+    return (CoreDebug->DHCSR & CoreDebug_DHCSR_C_DEBUGEN_Msk) ? 1 : 0;
+}
+
+#else
+// These processors cannot know if the interface is connect, assume so:
+static int is_debugger_attached = 1;
+
+int semihost_connected(void) {
+    return is_debugger_attached;
+}
+#endif
+
+int semihost_disabledebug(void) {
+#if !(DEVICE_DEBUG_AWARENESS)
+    is_debugger_attached = 0;
+#endif
+    return __semihost(USR_DISABLEDEBUG, NULL);
+}
+
+#endif
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/ticker_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,135 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <stddef.h>
+#include "ticker_api.h"
+#include "cmsis.h"
+
+void ticker_set_handler(const ticker_data_t *const data, ticker_event_handler handler) {
+    data->interface->init();
+
+    data->queue->event_handler = handler;
+}
+
+void ticker_irq_handler(const ticker_data_t *const data) {
+    data->interface->clear_interrupt();
+
+    /* Go through all the pending TimerEvents */
+    while (1) {
+        if (data->queue->head == NULL) {
+            // There are no more TimerEvents left, so disable matches.
+            data->interface->disable_interrupt();
+            return;
+        }
+
+        if ((int)(data->queue->head->timestamp - data->interface->read()) <= 0) {
+            // This event was in the past:
+            //      point to the following one and execute its handler
+            ticker_event_t *p = data->queue->head;
+            data->queue->head = data->queue->head->next;
+            if (data->queue->event_handler != NULL) {
+                (*data->queue->event_handler)(p->id); // NOTE: the handler can set new events
+            }
+            /* Note: We continue back to examining the head because calling the
+             * event handler may have altered the chain of pending events. */
+        } else {
+            // This event and the following ones in the list are in the future:
+            //      set it as next interrupt and return
+            data->interface->set_interrupt(data->queue->head->timestamp);
+            return;
+        }
+    }
+}
+
+void ticker_insert_event(const ticker_data_t *const data, ticker_event_t *obj, timestamp_t timestamp, uint32_t id) {
+    /* disable interrupts for the duration of the function */
+    __disable_irq();
+
+    // initialise our data
+    obj->timestamp = timestamp;
+    obj->id = id;
+
+    /* Go through the list until we either reach the end, or find
+       an element this should come before (which is possibly the
+       head). */
+    ticker_event_t *prev = NULL, *p = data->queue->head;
+    while (p != NULL) {
+        /* check if we come before p */
+        if ((int)(timestamp - p->timestamp) < 0) {
+            break;
+        }
+        /* go to the next element */
+        prev = p;
+        p = p->next;
+    }
+    /* if prev is NULL we're at the head */
+    if (prev == NULL) {
+        data->queue->head = obj;
+        data->interface->set_interrupt(timestamp);
+    } else {
+        prev->next = obj;
+    }
+    /* if we're at the end p will be NULL, which is correct */
+    obj->next = p;
+
+    __enable_irq();
+}
+
+void ticker_remove_event(const ticker_data_t *const data, ticker_event_t *obj) {
+    __disable_irq();
+
+    // remove this object from the list
+    if (data->queue->head == obj) {
+        // first in the list, so just drop me
+        data->queue->head = obj->next;
+        if (data->queue->head == NULL) {
+            data->interface->disable_interrupt();
+        } else {
+            data->interface->set_interrupt(data->queue->head->timestamp);
+        }
+    } else {
+        // find the object before me, then drop me
+        ticker_event_t* p = data->queue->head;
+        while (p != NULL) {
+            if (p->next == obj) {
+                p->next = obj->next;
+                break;
+            }
+            p = p->next;
+        }
+    }
+
+    __enable_irq();
+}
+
+timestamp_t ticker_read(const ticker_data_t *const data)
+{
+    return data->interface->read();
+}
+
+int ticker_get_next_timestamp(const ticker_data_t *const data, timestamp_t *timestamp)
+{
+    int ret = 0;
+
+    /* if head is NULL, there are no pending events */
+    __disable_irq();
+    if (data->queue->head != NULL) {
+        *timestamp = data->queue->head->timestamp;
+        ret = 1;
+    }
+    __enable_irq();
+
+    return ret;
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/us_ticker_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,41 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "us_ticker_api.h"
+
+static ticker_event_queue_t events;
+
+static const ticker_interface_t us_interface = {
+    .init = us_ticker_init,
+    .read = us_ticker_read,
+    .disable_interrupt = us_ticker_disable_interrupt,
+    .clear_interrupt = us_ticker_clear_interrupt,
+    .set_interrupt = us_ticker_set_interrupt,
+};
+
+static const ticker_data_t us_data = {
+    .interface = &us_interface,
+    .queue = &events,
+};
+
+const ticker_data_t* get_us_ticker_data(void)
+{
+    return &us_data;
+}
+
+void us_ticker_irq_handler(void)
+{
+    ticker_irq_handler(&us_data);
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/common/wait_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,30 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "wait_api.h"
+#include "us_ticker_api.h"
+
+void wait(float s) {
+    wait_us(s * 1000000.0f);
+}
+
+void wait_ms(int ms) {
+    wait_us(ms * 1000);
+}
+
+void wait_us(int us) {
+    uint32_t start = us_ticker_read();
+    while ((us_ticker_read() - start) < (uint32_t)us);
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/analogin_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,39 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGIN_API_H
+#define MBED_ANALOGIN_API_H
+
+#include "device.h"
+
+#if DEVICE_ANALOGIN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct analogin_s analogin_t;
+
+void     analogin_init    (analogin_t *obj, PinName pin);
+float    analogin_read    (analogin_t *obj);
+uint16_t analogin_read_u16(analogin_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/analogout_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ANALOGOUT_API_H
+#define MBED_ANALOGOUT_API_H
+
+#include "device.h"
+
+#if DEVICE_ANALOGOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct dac_s dac_t;
+
+void     analogout_init     (dac_t *obj, PinName pin);
+void     analogout_free     (dac_t *obj);
+void     analogout_write    (dac_t *obj, float value);
+void     analogout_write_u16(dac_t *obj, uint16_t value);
+float    analogout_read     (dac_t *obj);
+uint16_t analogout_read_u16 (dac_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/buffer.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,30 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUFFER_H
+#define MBED_BUFFER_H
+
+#include <stddef.h>
+
+/** Generic buffer structure
+ */
+typedef struct buffer_s {
+    void    *buffer; /**< the pointer to a buffer */
+    size_t   length; /**< the buffer length */
+    size_t   pos;    /**< actual buffer position */
+    uint8_t  width;  /**< The buffer unit width (8, 16, 32, 64), used for proper *buffer casting */
+} buffer_t;
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/can_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,80 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_CAN_API_H
+#define MBED_CAN_API_H
+
+#include "device.h"
+
+#if DEVICE_CAN
+
+#include "PinNames.h"
+#include "PeripheralNames.h"
+#include "can_helper.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    IRQ_RX,
+    IRQ_TX,
+    IRQ_ERROR,
+    IRQ_OVERRUN,
+    IRQ_WAKEUP,
+    IRQ_PASSIVE,
+    IRQ_ARB,
+    IRQ_BUS,
+    IRQ_READY
+} CanIrqType;
+
+
+typedef enum {
+    MODE_RESET,
+    MODE_NORMAL,
+    MODE_SILENT,
+    MODE_TEST_LOCAL,
+    MODE_TEST_GLOBAL,
+    MODE_TEST_SILENT
+} CanMode;
+
+typedef void (*can_irq_handler)(uint32_t id, CanIrqType type);
+
+typedef struct can_s can_t;
+
+void          can_init     (can_t *obj, PinName rd, PinName td);
+void          can_free     (can_t *obj);
+int           can_frequency(can_t *obj, int hz);
+
+void          can_irq_init (can_t *obj, can_irq_handler handler, uint32_t id);
+void          can_irq_free (can_t *obj);
+void          can_irq_set  (can_t *obj, CanIrqType irq, uint32_t enable);
+
+int           can_write    (can_t *obj, CAN_Message, int cc);
+int           can_read     (can_t *obj, CAN_Message *msg, int handle);
+int           can_mode     (can_t *obj, CanMode mode);
+int           can_filter(can_t *obj, uint32_t id, uint32_t mask, CANFormat format, int32_t handle);
+void          can_reset    (can_t *obj);
+unsigned char can_rderror  (can_t *obj);
+unsigned char can_tderror  (can_t *obj);
+void          can_monitor  (can_t *obj, int silent);
+
+#ifdef __cplusplus
+};
+#endif
+
+#endif    // MBED_CAN_API_H
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/dma_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,45 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2014-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_DMA_API_H
+#define MBED_DMA_API_H
+
+#include <stdint.h>
+
+#define DMA_ERROR_OUT_OF_CHANNELS (-1)
+
+typedef enum {
+    DMA_USAGE_NEVER,
+    DMA_USAGE_OPPORTUNISTIC,
+    DMA_USAGE_ALWAYS,
+    DMA_USAGE_TEMPORARY_ALLOCATED,
+    DMA_USAGE_ALLOCATED
+} DMAUsage;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void dma_init(void);
+
+int dma_channel_allocate(uint32_t capabilities);
+
+int dma_channel_free(int channelid);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/ethernet_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,63 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ETHERNET_API_H
+#define MBED_ETHERNET_API_H
+
+#include "device.h"
+
+#if DEVICE_ETHERNET
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Connection constants
+
+int ethernet_init(void);
+void ethernet_free(void);
+
+// write size bytes from data to ethernet buffer
+// return num bytes written
+// or -1 if size is too big
+int ethernet_write(const char *data, int size);
+
+// send ethernet write buffer, returning the packet size sent
+int ethernet_send(void);
+
+// recieve from ethernet buffer, returning packet size, or 0 if no packet
+int ethernet_receive(void);
+
+// read size bytes in to data, return actual num bytes read (0..size)
+// if data == NULL, throw the bytes away
+int ethernet_read(char *data, int size);
+
+// get the ethernet address
+void ethernet_address(char *mac);
+
+// see if the link is up
+int ethernet_link(void);
+
+// force link settings
+void ethernet_set_link(int speed, int duplex);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/gpio_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,57 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_API_H
+#define MBED_GPIO_API_H
+
+#include "device.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Set the given pin as GPIO
+ * @param pin The pin to be set as GPIO
+ * @return The GPIO port mask for this pin
+ **/
+uint32_t gpio_set(PinName pin);
+
+/* Checks if gpio object is connected (pin was not initialized with NC)
+ * @param pin The pin to be set as GPIO
+ * @return 0 if port is initialized with NC
+ **/
+int gpio_is_connected(const gpio_t *obj);
+
+/* GPIO object */
+void gpio_init(gpio_t *obj, PinName pin);
+
+void gpio_mode (gpio_t *obj, PinMode mode);
+void gpio_dir  (gpio_t *obj, PinDirection direction);
+
+void gpio_write(gpio_t *obj, int value);
+int  gpio_read (gpio_t *obj);
+
+// the following set of functions are generic and are implemented in the common gpio.c file
+void gpio_init_in(gpio_t* gpio, PinName pin);
+void gpio_init_in_ex(gpio_t* gpio, PinName pin, PinMode mode);
+void gpio_init_out(gpio_t* gpio, PinName pin);
+void gpio_init_out_ex(gpio_t* gpio, PinName pin, int value);
+void gpio_init_inout(gpio_t* gpio, PinName pin, PinDirection direction, PinMode mode, int value);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/gpio_irq_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_IRQ_API_H
+#define MBED_GPIO_IRQ_API_H
+
+#include "device.h"
+
+#if DEVICE_INTERRUPTIN
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    IRQ_NONE,
+    IRQ_RISE,
+    IRQ_FALL
+} gpio_irq_event;
+
+typedef struct gpio_irq_s gpio_irq_t;
+
+typedef void (*gpio_irq_handler)(uint32_t id, gpio_irq_event event);
+
+int  gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id);
+void gpio_irq_free(gpio_irq_t *obj);
+void gpio_irq_set (gpio_irq_t *obj, gpio_irq_event event, uint32_t enable);
+void gpio_irq_enable(gpio_irq_t *obj);
+void gpio_irq_disable(gpio_irq_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/i2c_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,224 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_I2C_API_H
+#define MBED_I2C_API_H
+
+#include "device.h"
+#include "buffer.h"
+#include "dma_api.h"
+
+#if DEVICE_I2C
+
+/**
+ * @defgroup I2CEvents I2C Events Macros
+ *
+ * @{
+ */
+#define I2C_EVENT_ERROR               (1 << 1)
+#define I2C_EVENT_ERROR_NO_SLAVE      (1 << 2)
+#define I2C_EVENT_TRANSFER_COMPLETE   (1 << 3)
+#define I2C_EVENT_TRANSFER_EARLY_NACK (1 << 4)
+#define I2C_EVENT_ALL                 (I2C_EVENT_ERROR |  I2C_EVENT_TRANSFER_COMPLETE | I2C_EVENT_ERROR_NO_SLAVE | I2C_EVENT_TRANSFER_EARLY_NACK)
+
+/**@}*/
+
+#if DEVICE_I2C_ASYNCH
+/** Asynch i2c hal structure
+ */
+typedef struct {
+    struct i2c_s    i2c;     /**< Target specific i2c structure */
+    struct buffer_s tx_buff; /**< Tx buffer */
+    struct buffer_s rx_buff; /**< Rx buffer */
+} i2c_t;
+
+#else
+/** Non-asynch i2c hal structure
+ */
+typedef struct i2c_s i2c_t;
+
+#endif
+
+enum {
+  I2C_ERROR_NO_SLAVE = -1,
+  I2C_ERROR_BUS_BUSY = -2
+};
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup GeneralI2C I2C Configuration Functions
+ * @{
+ */
+
+/** Initialize the I2C peripheral. It sets the default parameters for I2C
+ *  peripheral, and configure its specifieds pins.
+ *  @param obj  The i2c object
+ *  @param sda  The sda pin
+ *  @param scl  The scl pin
+ */
+void i2c_init(i2c_t *obj, PinName sda, PinName scl);
+
+/** Configure the I2C frequency.
+ *  @param obj The i2c object
+ *  @param hz  Frequency in Hz
+ */
+void i2c_frequency(i2c_t *obj, int hz);
+
+/** Send START command.
+ *  @param obj The i2c object
+ */
+int  i2c_start(i2c_t *obj);
+
+/** Send STOP command.
+ *  @param obj The i2c object
+ */
+int  i2c_stop(i2c_t *obj);
+
+/** Blocking reading data.
+ *  @param obj     The i2c object
+ *  @param address 7-bit address (last bit is 1)
+ *  @param data    The buffer for receiving
+ *  @param length  Number of bytes to read
+ *  @param stop    Stop to be generated after the transfer is done
+ *  @return Number of read bytes
+ */
+int  i2c_read(i2c_t *obj, int address, char *data, int length, int stop);
+
+/** Blocking sending data.
+ *  @param obj     The i2c object
+ *  @param address 7-bit address (last bit is 0)
+ *  @param data    The buffer for sending
+ *  @param length  Number of bytes to wrte
+ *  @param stop    Stop to be generated after the transfer is done
+ *  @return Number of written bytes
+ */
+int  i2c_write(i2c_t *obj, int address, const char *data, int length, int stop);
+
+/** Reset I2C peripheral. TODO: The action here. Most of the implementation sends stop().
+ *  @param obj The i2c object
+ */
+void i2c_reset(i2c_t *obj);
+
+/** Read one byte.
+ *  @param obj The i2c object
+ *  @param last Acknoledge
+ *  @return The read byte
+ */
+int  i2c_byte_read(i2c_t *obj, int last);
+
+/** Write one byte.
+ *  @param obj The i2c object
+ *  @param data Byte to be written
+ *  @return 0 if NAK was received, 1 if ACK was received, 2 for timeout.
+ */
+int  i2c_byte_write(i2c_t *obj, int data);
+
+/**@}*/
+
+#if DEVICE_I2CSLAVE
+
+/**
+ * \defgroup SynchI2C Synchronous I2C Hardware Abstraction Layer for slave
+ * @{
+ */
+
+/** Configure I2C as slave or master.
+ *  @param obj The I2C object
+ *  @return non-zero if a value is available
+ */
+void i2c_slave_mode(i2c_t *obj, int enable_slave);
+
+/** Check to see if the I2C slave has been addressed.
+ *  @param obj The I2C object
+ *  @return The status - 1 - read addresses, 2 - write to all slaves,
+ *         3 write addressed, 0 - the slave has not been addressed
+ */
+int  i2c_slave_receive(i2c_t *obj);
+
+/** Configure I2C as slave or master.
+ *  @param obj The I2C object
+ *  @return non-zero if a value is available
+ */
+int  i2c_slave_read(i2c_t *obj, char *data, int length);
+
+/** Configure I2C as slave or master.
+ *  @param obj The I2C object
+ *  @return non-zero if a value is available
+ */
+int  i2c_slave_write(i2c_t *obj, const char *data, int length);
+
+/** Configure I2C address.
+ *  @param obj     The I2C object
+ *  @param idx     Currently not used
+ *  @param address The address to be set
+ *  @param mask    Currently not used
+ */
+void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask);
+
+#endif
+
+/**@}*/
+
+#if DEVICE_I2C_ASYNCH
+
+/**
+ * \defgroup AsynchI2C Asynchronous I2C Hardware Abstraction Layer
+ * @{
+ */
+
+/** Start i2c asynchronous transfer.
+ *  @param obj       The I2C object
+ *  @param tx        The buffer to send
+ *  @param tx_length The number of words to transmit
+ *  @param rx        The buffer to receive
+ *  @param rx_length The number of words to receive
+ *  @param address   The address to be set - 7bit or 9 bit
+ *  @param stop      If true, stop will be generated after the transfer is done
+ *  @param handler   The I2C IRQ handler to be set
+ *  @param hint      DMA hint usage
+ */
+void i2c_transfer_asynch(i2c_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint32_t address, uint32_t stop, uint32_t handler, uint32_t event, DMAUsage hint);
+
+/** The asynchronous IRQ handler
+ *  @param obj The I2C object which holds the transfer information
+ *  @return event flags if a transfer termination condition was met or 0 otherwise.
+ */
+uint32_t i2c_irq_handler_asynch(i2c_t *obj);
+
+/** Attempts to determine if I2C peripheral is already in use.
+ *  @param obj The I2C object
+ *  @return non-zero if the I2C module is active or zero if it is not
+ */
+uint8_t i2c_active(i2c_t *obj);
+
+/** Abort ongoing asynchronous transaction.
+ *  @param obj The I2C object
+ */
+void i2c_abort_asynch(i2c_t *obj);
+
+#endif
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/lp_ticker_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_LPTICKER_API_H
+#define MBED_LPTICKER_API_H
+
+#include "device.h"
+
+#if DEVICE_LOWPOWERTIMER
+
+#include "ticker_api.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup LpTicker Low Power Ticker Functions
+ * @{
+ */
+
+/** Get low power ticker's data
+ *
+ * @return The low power ticker data
+ */
+const ticker_data_t* get_lp_ticker_data(void);
+
+/** The wrapper for ticker_irq_handler, to pass lp ticker's data
+ *
+ */
+void lp_ticker_irq_handler(void);
+
+/* HAL lp ticker */
+
+/** Initialize the low power ticker
+ *
+ */
+void lp_ticker_init(void);
+
+/** Read the current counter
+ *
+ * @return The current timer's counter value in microseconds
+ */
+uint32_t lp_ticker_read(void);
+
+/** Set interrupt for specified timestamp
+ *
+ * @param timestamp The time in microseconds to be set
+ */
+void lp_ticker_set_interrupt(timestamp_t timestamp);
+
+/** Disable low power ticker interrupt
+ *
+ */
+void lp_ticker_disable_interrupt(void);
+
+/** Clear the low power ticker interrupt
+ *
+ */
+void lp_ticker_clear_interrupt(void);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/pinmap.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,45 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINMAP_H
+#define MBED_PINMAP_H
+
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+    PinName pin;
+    int peripheral;
+    int function;
+} PinMap;
+
+void pin_function(PinName pin, int function);
+void pin_mode    (PinName pin, PinMode mode);
+
+uint32_t pinmap_peripheral(PinName pin, const PinMap* map);
+uint32_t pinmap_function(PinName pin, const PinMap* map);
+uint32_t pinmap_merge     (uint32_t a, uint32_t b);
+void     pinmap_pinout    (PinName pin, const PinMap *map);
+uint32_t pinmap_find_peripheral(PinName pin, const PinMap* map);
+uint32_t pinmap_find_function(PinName pin, const PinMap* map);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/port_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTMAP_H
+#define MBED_PORTMAP_H
+
+#include "device.h"
+
+#if DEVICE_PORTIN || DEVICE_PORTOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct port_s port_t;
+
+PinName port_pin(PortName port, int pin_n);
+
+void port_init (port_t *obj, PortName port, int mask, PinDirection dir);
+void port_mode (port_t *obj, PinMode mode);
+void port_dir  (port_t *obj, PinDirection dir);
+void port_write(port_t *obj, int value);
+int  port_read (port_t *obj);
+
+#ifdef __cplusplus
+}
+#endif
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/pwmout_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PWMOUT_API_H
+#define MBED_PWMOUT_API_H
+
+#include "device.h"
+
+#if DEVICE_PWMOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct pwmout_s pwmout_t;
+
+void pwmout_init         (pwmout_t* obj, PinName pin);
+void pwmout_free         (pwmout_t* obj);
+
+void  pwmout_write       (pwmout_t* obj, float percent);
+float pwmout_read        (pwmout_t* obj);
+
+void pwmout_period       (pwmout_t* obj, float seconds);
+void pwmout_period_ms    (pwmout_t* obj, int ms);
+void pwmout_period_us    (pwmout_t* obj, int us);
+
+void pwmout_pulsewidth   (pwmout_t* obj, float seconds);
+void pwmout_pulsewidth_ms(pwmout_t* obj, int ms);
+void pwmout_pulsewidth_us(pwmout_t* obj, int us);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/rtc_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,42 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_RTC_API_H
+#define MBED_RTC_API_H
+
+#include "device.h"
+
+#if DEVICE_RTC
+
+#include <time.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void rtc_init(void);
+void rtc_free(void);
+int rtc_isenabled(void);
+
+time_t rtc_read(void);
+void rtc_write(time_t t);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/serial_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,302 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIAL_API_H
+#define MBED_SERIAL_API_H
+
+#include "device.h"
+#include "buffer.h"
+#include "dma_api.h"
+
+#if DEVICE_SERIAL
+
+#define SERIAL_EVENT_TX_SHIFT (2)
+#define SERIAL_EVENT_RX_SHIFT (8)
+
+#define SERIAL_EVENT_TX_MASK (0x00FC)
+#define SERIAL_EVENT_RX_MASK (0x3F00)
+
+#define SERIAL_EVENT_ERROR (1 << 1)
+
+/**
+ * @defgroup SerialTXEvents Serial TX Events Macros
+ *
+ * @{
+ */
+#define SERIAL_EVENT_TX_COMPLETE (1 << (SERIAL_EVENT_TX_SHIFT + 0))
+#define SERIAL_EVENT_TX_ALL      (SERIAL_EVENT_TX_COMPLETE)
+/**@}*/
+
+/**
+ * @defgroup SerialRXEvents Serial RX Events Macros
+ *
+ * @{
+ */
+#define SERIAL_EVENT_RX_COMPLETE        (1 << (SERIAL_EVENT_RX_SHIFT + 0))
+#define SERIAL_EVENT_RX_OVERRUN_ERROR   (1 << (SERIAL_EVENT_RX_SHIFT + 1))
+#define SERIAL_EVENT_RX_FRAMING_ERROR   (1 << (SERIAL_EVENT_RX_SHIFT + 2))
+#define SERIAL_EVENT_RX_PARITY_ERROR    (1 << (SERIAL_EVENT_RX_SHIFT + 3))
+#define SERIAL_EVENT_RX_OVERFLOW        (1 << (SERIAL_EVENT_RX_SHIFT + 4))
+#define SERIAL_EVENT_RX_CHARACTER_MATCH (1 << (SERIAL_EVENT_RX_SHIFT + 5))
+#define SERIAL_EVENT_RX_ALL             (SERIAL_EVENT_RX_OVERFLOW | SERIAL_EVENT_RX_PARITY_ERROR | \
+                                         SERIAL_EVENT_RX_FRAMING_ERROR | SERIAL_EVENT_RX_OVERRUN_ERROR | \
+                                         SERIAL_EVENT_RX_COMPLETE | SERIAL_EVENT_RX_CHARACTER_MATCH)
+/**@}*/
+
+#define SERIAL_RESERVED_CHAR_MATCH (255)
+
+typedef enum {
+    ParityNone = 0,
+    ParityOdd = 1,
+    ParityEven = 2,
+    ParityForced1 = 3,
+    ParityForced0 = 4
+} SerialParity;
+
+typedef enum {
+    RxIrq,
+    TxIrq
+} SerialIrq;
+
+typedef enum {
+    FlowControlNone,
+    FlowControlRTS,
+    FlowControlCTS,
+    FlowControlRTSCTS
+} FlowControl;
+
+typedef void (*uart_irq_handler)(uint32_t id, SerialIrq event);
+
+#if DEVICE_SERIAL_ASYNCH
+/** Asynch serial hal structure
+ */
+typedef struct {
+    struct serial_s serial;  /**< Target specific serial structure */
+    struct buffer_s tx_buff; /**< Tx buffer */
+    struct buffer_s rx_buff; /**< Rx buffer */
+    uint8_t char_match;      /**< Character to be matched */
+    uint8_t char_found;      /**< State of the matched character */
+} serial_t;
+
+#else
+/** Non-asynch serial hal structure
+ */
+typedef struct serial_s serial_t;
+
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup GeneralSerial Serial Configuration Functions
+ * @{
+ */
+
+/** Initialize the serial peripheral. It sets the default parameters for serial
+ *  peripheral, and configure its specifieds pins.
+ *
+ * @param obj The serial object
+ * @param tx  The TX pin
+ * @param rx  The RX pin
+ */
+void serial_init(serial_t *obj, PinName tx, PinName rx);
+
+/** Release the serial peripheral, not currently invoked. It requires further
+ *  resource management.
+ *
+ * @param obj The serial object
+ */
+void serial_free(serial_t *obj);
+
+/** Configure the baud rate
+ *
+ * @param obj      The serial object
+ * @param baudrate The baud rate to be configured
+ */
+void serial_baud(serial_t *obj, int baudrate);
+
+/** Configure the format. Set the number of bits, parity and the number of stop bits
+ *
+ * @param obj       The serial object
+ * @param data_bits The number of data bits
+ * @param parity    The parity
+ * @param stop_bits The number of stop bits
+ */
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits);
+
+/** The serial interrupt handler registration.
+ *
+ * @param obj     The serial object
+ * @param handler The interrupt handler which will be invoked when interrupt fires.
+ * @param id      The SerialBase object
+ */
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id);
+
+/** Configure serial interrupt. This function is used for word-approach
+ *
+ * @param obj    The serial object
+ * @param irq    The serial IRQ type (RX or TX)
+ * @param enable Set to non-zero to enable events, or zero to disable them
+ */
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable);
+
+/** Get character. This is a blocking call, waiting for a character
+ *
+ * @param obj The serial object
+ */
+int  serial_getc(serial_t *obj);
+
+/** Put a character. This is a blocking call, waiting for a peripheral to be available
+ *  for writing
+ *
+ * @param obj The serial object
+ * @param c   The character to be sent
+ */
+void serial_putc(serial_t *obj, int c);
+
+/** Check if the serial peripheral is readable
+ *
+ * @param obj The serial object
+ * @return Non-zero value if a character can be read, 0 if nothing to read.
+ */
+int  serial_readable(serial_t *obj);
+
+/** Check if the serial peripheral is writable
+ *
+ * @param obj The serial object
+ * @return Non-zero value if a character can be written, 0 otherwise.
+ */
+int  serial_writable(serial_t *obj);
+
+/** Clear the serial peripheral
+ *
+ * @param obj The serial object
+ */
+void serial_clear(serial_t *obj);
+
+/** Set the break
+ *
+ * @param obj The serial object
+ */
+void serial_break_set(serial_t *obj);
+
+/** Clear the break
+ *
+ * @param obj The serial object
+ */
+void serial_break_clear(serial_t *obj);
+
+/** Configure the TX pin for UART function.
+ *
+ * @param tx The pin used for TX
+ */
+void serial_pinout_tx(PinName tx);
+
+/** Configure the serial for the flow control. It sets flow control in the hardware
+ *  if a serial peripheral supports it, otherwise software emulation is used.
+ *
+ * @param obj    The serial object
+ * @param type   The type of the flow control. Look at the available FlowControl types.
+ * @param rxflow The tx pin
+ * @param txflow The rx pin
+ */
+void serial_set_flow_control(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow);
+
+#if DEVICE_SERIAL_ASYNCH
+
+/**@}*/
+
+/**
+ * \defgroup AsynchSerial Asynchronous Serial Hardware Abstraction Layer
+ * @{
+ */
+
+/** Begin asynchronous TX transfer. The used buffer is specified in the serial object,
+ *  tx_buff
+ *
+ * @param obj       The serial object
+ * @param tx        The buffer for sending
+ * @param tx_length The number of words to transmit
+ * @param tx_width  The bit width of buffer word
+ * @param handler   The serial handler
+ * @param event     The logical OR of events to be registered
+ * @param hint      A suggestion for how to use DMA with this transfer
+ * @return Returns number of data transfered, or 0 otherwise
+ */
+int serial_tx_asynch(serial_t *obj, const void *tx, size_t tx_length, uint8_t tx_width, uint32_t handler, uint32_t event, DMAUsage hint);
+
+/** Begin asynchronous RX transfer (enable interrupt for data collecting)
+ *  The used buffer is specified in the serial object - rx_buff
+ *
+ * @param obj        The serial object
+ * @param rx         The buffer for sending
+ * @param rx_length  The number of words to transmit
+ * @param rx_width   The bit width of buffer word
+ * @param handler    The serial handler
+ * @param event      The logical OR of events to be registered
+ * @param handler    The serial handler
+ * @param char_match A character in range 0-254 to be matched
+ * @param hint       A suggestion for how to use DMA with this transfer
+ */
+void serial_rx_asynch(serial_t *obj, void *rx, size_t rx_length, uint8_t rx_width, uint32_t handler, uint32_t event, uint8_t char_match, DMAUsage hint);
+
+/** Attempts to determine if the serial peripheral is already in use for TX
+ *
+ * @param obj The serial object
+ * @return Non-zero if the RX transaction is ongoing, 0 otherwise
+ */
+uint8_t serial_tx_active(serial_t *obj);
+
+/** Attempts to determine if the serial peripheral is already in use for RX
+ *
+ * @param obj The serial object
+ * @return Non-zero if the RX transaction is ongoing, 0 otherwise
+ */
+uint8_t serial_rx_active(serial_t *obj);
+
+/** The asynchronous TX and RX handler.
+ *
+ * @param obj The serial object
+ * @return Returns event flags if a RX transfer termination condition was met or 0 otherwise
+ */
+int serial_irq_handler_asynch(serial_t *obj);
+
+/** Abort the ongoing TX transaction. It disables the enabled interupt for TX and
+ *  flush TX hardware buffer if TX FIFO is used
+ *
+ * @param obj The serial object
+ */
+void serial_tx_abort_asynch(serial_t *obj);
+
+/** Abort the ongoing RX transaction It disables the enabled interrupt for RX and
+ *  flush RX hardware buffer if RX FIFO is used
+ *
+ * @param obj The serial object
+ */
+void serial_rx_abort_asynch(serial_t *obj);
+
+/**@}*/
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/sleep_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,64 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SLEEP_API_H
+#define MBED_SLEEP_API_H
+
+#include "device.h"
+
+#if DEVICE_SLEEP
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Send the microcontroller to sleep
+ *
+ * The processor is setup ready for sleep, and sent to sleep using __WFI(). In this mode, the
+ * system clock to the core is stopped until a reset or an interrupt occurs. This eliminates
+ * dynamic power used by the processor, memory systems and buses. The processor, peripheral and
+ * memory state are maintained, and the peripherals continue to work and can generate interrupts.
+ *
+ * The processor can be woken up by any internal peripheral interrupt or external pin interrupt.
+ *
+ * @note
+ *  The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+void sleep(void);
+
+/** Send the microcontroller to deep sleep
+ *
+ * This processor is setup ready for deep sleep, and sent to sleep using __WFI(). This mode
+ * has the same sleep features as sleep plus it powers down peripherals and clocks. All state
+ * is still maintained.
+ *
+ * The processor can only be woken up by an external interrupt on a pin or a watchdog timer.
+ *
+ * @note
+ *  The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored.
+ * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be
+ * able to access the LocalFileSystem
+ */
+void deepsleep(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/spi_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,213 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SPI_API_H
+#define MBED_SPI_API_H
+
+#include "device.h"
+#include "dma_api.h"
+#include "buffer.h"
+
+#if DEVICE_SPI
+
+#define SPI_EVENT_ERROR       (1 << 1)
+#define SPI_EVENT_COMPLETE    (1 << 2)
+#define SPI_EVENT_RX_OVERFLOW (1 << 3)
+#define SPI_EVENT_ALL         (SPI_EVENT_ERROR | SPI_EVENT_COMPLETE | SPI_EVENT_RX_OVERFLOW)
+
+#define SPI_EVENT_INTERNAL_TRANSFER_COMPLETE (1 << 30) // internal flag to report an event occurred
+
+#define SPI_FILL_WORD         (0xFFFF)
+
+#if DEVICE_SPI_ASYNCH
+/** Asynch spi hal structure
+ */
+typedef struct {
+    struct spi_s spi;        /**< Target specific spi structure */
+    struct buffer_s tx_buff; /**< Tx buffer */
+    struct buffer_s rx_buff; /**< Rx buffer */
+} spi_t;
+
+#else
+/** Non-asynch spi hal structure
+ */
+typedef struct spi_s spi_t;
+
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup GeneralSPI SPI Configuration Functions
+ * @{
+ */
+
+/** Initialize the SPI peripheral
+ *
+ * Configures the pins used by SPI, sets a default format and frequency, and enables the peripheral
+ * @param[out] obj  The SPI object to initialize
+ * @param[in]  mosi The pin to use for MOSI
+ * @param[in]  miso The pin to use for MISO
+ * @param[in]  sclk The pin to use for SCLK
+ * @param[in]  ssel The pin to use for SSEL
+ */
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel);
+
+/** Release a SPI object
+ *
+ * TODO: spi_free is currently unimplemented
+ * This will require reference counting at the C++ level to be safe
+ *
+ * Return the pins owned by the SPI object to their reset state
+ * Disable the SPI peripheral
+ * Disable the SPI clock
+ * @param[in] obj The SPI object to deinitialize
+ */
+void spi_free(spi_t *obj);
+
+/** Configure the SPI format
+ *
+ * Set the number of bits per frame, configure clock polarity and phase, shift order and master/slave mode
+ * @param[in,out] obj   The SPI object to configure
+ * @param[in]     bits  The number of bits per frame
+ * @param[in]     mode  The SPI mode (clock polarity, phase, and shift direction)
+ * @param[in]     slave Zero for master mode or non-zero for slave mode
+ */
+void spi_format(spi_t *obj, int bits, int mode, int slave);
+
+/** Set the SPI baud rate
+ *
+ * Actual frequency may differ from the desired frequency due to available dividers and bus clock
+ * Configures the SPI peripheral's baud rate
+ * @param[in,out] obj The SPI object to configure
+ * @param[in]     hz  The baud rate in Hz
+ */
+void spi_frequency(spi_t *obj, int hz);
+
+/**@}*/
+/**
+ * \defgroup SynchSPI Synchronous SPI Hardware Abstraction Layer
+ * @{
+ */
+
+/** Write a byte out in master mode and receive a value
+ *
+ * @param[in] obj   The SPI peripheral to use for sending
+ * @param[in] value The value to send
+ * @return Returns the value received during send
+ */
+int  spi_master_write(spi_t *obj, int value);
+
+/** Check if a value is available to read
+ *
+ * @param[in] obj The SPI peripheral to check
+ * @return non-zero if a value is available
+ */
+int  spi_slave_receive(spi_t *obj);
+
+/** Get a received value out of the SPI receive buffer in slave mode
+ *
+ * Blocks until a value is available
+ * @param[in] obj The SPI peripheral to read
+ * @return The value received
+ */
+int  spi_slave_read(spi_t *obj);
+
+/** Write a value to the SPI peripheral in slave mode
+ *
+ * Blocks until the SPI peripheral can be written to
+ * @param[in] obj   The SPI peripheral to write
+ * @param[in] value The value to write
+ */
+void spi_slave_write(spi_t *obj, int value);
+
+/** Checks if the specified SPI peripheral is in use
+ *
+ * @param[in] obj The SPI peripheral to check
+ * @return non-zero if the peripheral is currently transmitting
+ */
+int  spi_busy(spi_t *obj);
+
+/** Get the module number
+ *
+ * @param[in] obj The SPI peripheral to check
+ * @return The module number
+ */
+uint8_t spi_get_module(spi_t *obj);
+
+/**@}*/
+
+#if DEVICE_SPI_ASYNCH
+/**
+ * \defgroup AsynchSPI Asynchronous SPI Hardware Abstraction Layer
+ * @{
+ */
+
+/** Begin the SPI transfer. Buffer pointers and lengths are specified in tx_buff and rx_buff
+ *
+ * @param[in] obj       The SPI object which holds the transfer information
+ * @param[in] tx        The buffer to send
+ * @param[in] tx_length The number of words to transmit
+ * @param[in] rx        The buffer to receive
+ * @param[in] rx_length The number of words to receive
+ * @param[in] bit_width The bit width of buffer words
+ * @param[in] event     The logical OR of events to be registered
+ * @param[in] handler   SPI interrupt handler
+ * @param[in] hint      A suggestion for how to use DMA with this transfer
+ */
+void spi_master_transfer(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint8_t bit_width, uint32_t handler, uint32_t event, DMAUsage hint);
+
+/** The asynchronous IRQ handler
+ *
+ * Reads the received values out of the RX FIFO, writes values into the TX FIFO and checks for transfer termination
+ * conditions, such as buffer overflows or transfer complete.
+ * @param[in] obj     The SPI object which holds the transfer information
+ * @return event flags if a transfer termination condition was met or 0 otherwise.
+ */
+uint32_t spi_irq_handler_asynch(spi_t *obj);
+
+/** Attempts to determine if the SPI peripheral is already in use.
+ *
+ * If a temporary DMA channel has been allocated, peripheral is in use.
+ * If a permanent DMA channel has been allocated, check if the DMA channel is in use.  If not, proceed as though no DMA
+ * channel were allocated.
+ * If no DMA channel is allocated, check whether tx and rx buffers have been assigned.  For each assigned buffer, check
+ * if the corresponding buffer position is less than the buffer length.  If buffers do not indicate activity, check if
+ * there are any bytes in the FIFOs.
+ * @param[in] obj The SPI object to check for activity
+ * @return non-zero if the SPI port is active or zero if it is not.
+ */
+uint8_t spi_active(spi_t *obj);
+
+/** Abort an SPI transfer
+ *
+ * @param obj The SPI peripheral to stop
+ */
+void spi_abort_asynch(spi_t *obj);
+
+
+#endif
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif // __cplusplus
+
+#endif // SPI_DEVICE
+
+#endif // MBED_SPI_API_H

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/targets.json	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1864 @@
+{
+    "Target": {
+        "core": null,
+        "default_toolchain": "ARM",
+        "supported_toolchains": null,
+        "extra_labels": [],
+        "is_disk_virtual": false,
+        "macros": [],
+        "device_has": [],
+        "features": [],
+        "detect_code": [],
+        "public": false,
+        "default_build": "standard",
+        "release": false
+    },
+    "CM4_UARM": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4",
+        "default_toolchain": "uARM",
+        "public": false,
+        "supported_toolchains": ["uARM"],
+        "default_build": "small",
+        "release": false
+    },
+    "CM4_ARM": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4",
+        "public": false,
+        "supported_toolchains": ["ARM"],
+        "release": false
+    },
+    "CM4F_UARM": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "public": false,
+        "supported_toolchains": ["uARM"],
+        "default_build": "small",
+        "release": false
+    },
+    "CM4F_ARM": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "public": false,
+        "supported_toolchains": ["ARM"],
+        "release": false
+    },
+    "LPCTarget": {
+        "inherits": ["Target"],
+        "post_binary_hook": {"function": "LPCTargetCode.lpc_patch"},
+        "public": false,
+        "release": false
+    },
+    "LPC11C24": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0",
+        "progen": {"target": "lpc11c24_301"},
+        "extra_labels": ["NXP", "LPC11XX_11CXX", "LPC11CXX"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "device_has": ["ANALOGIN", "CAN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+    },
+    "LPC1114": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC11XX_11CXX", "LPC11XX"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "progen": {
+            "target": "lpc1114_102"
+        },
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "LPC11U24": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC11UXX", "LPC11U24_401"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "progen": {
+            "target": "lpc11u24_201"
+        },
+        "detect_code": ["1040"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "OC_MBUINO": {
+        "inherits": ["LPC11U24"],
+        "macros": ["TARGET_LPC11U24"],
+        "progen": {
+            "target": "lpc11u24_201"
+        },
+        "extra_labels": ["NXP", "LPC11UXX"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "LPC11U24_301": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0",
+        "extra_labels": ["NXP", "LPC11UXX"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+    },
+    "LPC11U34_421": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC11UXX"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "default_build": "small"
+    },
+    "MICRONFCBOARD": {
+        "inherits": ["LPC11U34_421"],
+        "macros": ["LPC11U34_421", "APPNEARME_MICRONFCBOARD"],
+        "extra_labels_add": ["APPNEARME_MICRONFCBOARD"],
+        "release": true
+    },
+    "LPC11U35_401": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC11UXX"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "progen": {
+            "target": "lpc11u35_401"
+        },
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "default_build": "small",
+        "release": true
+    },
+    "LPC11U35_501": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "progen": {
+            "target": "lpc11u35_501"
+        },
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "default_build": "small",
+        "release": true
+    },
+    "LPC11U35_501_IBDAP": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "progen": {
+            "target": "lpc11u35_501"
+        },
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "default_build": "small"
+    },
+    "XADOW_M0": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "progen": {
+            "target": "lpc11u35_501"
+        },
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "default_build": "small",
+        "release": true
+    },
+    "LPC11U35_Y5_MBUG": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC11UXX", "MCU_LPC11U35_501"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "progen": {
+            "target": "lpc11u35_501"
+        },
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "default_build": "small"
+    },
+    "LPC11U37_501": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC11UXX"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "progen": {
+            "target": "lpc11u37_501"
+        },
+        "default_build": "small"
+    },
+    "LPCCAPPUCCINO": {
+        "inherits": ["LPC11U37_501"],
+        "progen": {
+            "target": "lpc11u37_501"
+        },
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+    },
+    "ARCH_GPRS": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC11UXX", "LPC11U37_501"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "inherits": ["LPCTarget"],
+        "progen": {
+            "target": "lpc11u37_501"
+        },
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "default_build": "small",
+        "release": true
+    },
+    "LPC11U68": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0+",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC11U6X"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_CR", "GCC_ARM", "IAR"],
+        "inherits": ["LPCTarget"],
+        "progen": {
+            "target": "lpc11u68"
+        },
+        "detect_code": ["1168"],
+        "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI"],
+        "default_build": "small",
+        "release": true
+    },
+    "LPC1347": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M3",
+        "progen": {"target": "lpc1347"},
+        "extra_labels": ["NXP", "LPC13XX"],
+        "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "LPC1549": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M3",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC15XX"],
+        "supported_toolchains": ["uARM", "GCC_CR", "GCC_ARM", "IAR"],
+        "inherits": ["LPCTarget"],
+        "progen": {
+            "target": "lpc1549"
+        },
+        "detect_code": ["1549"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "I2C", "INTERRUPTIN", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE"],
+        "default_build": "small",
+        "release": true
+    },
+    "LPC1768": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M3",
+        "extra_labels": ["NXP", "LPC176X", "MBED_LPC1768"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "progen": {"target": "mbed-lpc1768"},
+        "detect_code": ["1010"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "ARCH_PRO": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M3",
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "extra_labels": ["NXP", "LPC176X"],
+        "macros": ["TARGET_LPC1768"],
+        "inherits": ["LPCTarget"],
+        "progen": {"target": "arch-pro"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "UBLOX_C027": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M3",
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "extra_labels": ["NXP", "LPC176X"],
+        "macros": ["TARGET_LPC1768"],
+        "inherits": ["LPCTarget"],
+        "progen": {"target": "ublox-c027"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_RED", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "XBED_LPC1768": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M3",
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "extra_labels": ["NXP", "LPC176X", "XBED_LPC1768"],
+        "macros": ["TARGET_LPC1768"],
+        "progen": {"target": "lpc1768"},
+        "detect_code": ["1010"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+    },
+    "LPC2368": {
+        "inherits": ["LPCTarget"],
+        "core": "ARM7TDMI-S",
+        "progen": {"target": "lpc2368"},
+        "extra_labels": ["NXP", "LPC23XX"],
+        "supported_toolchains": ["GCC_ARM", "GCC_CR"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOCALFILESYSTEM", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "LPC2460": {
+        "inherits": ["LPCTarget"],
+        "core": "ARM7TDMI-S",
+        "progen": {"target": "lpc2460"},
+        "extra_labels": ["NXP", "LPC2460"],
+        "supported_toolchains": ["GCC_ARM"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "LPC810": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0+",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC81X"],
+        "is_disk_virtual": true,
+        "supported_toolchains": ["uARM", "IAR", "GCC_ARM"],
+        "progen": {
+            "target": "lpc810"
+        },
+        "device_has": ["ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE"],
+        "default_build": "small"
+    },
+    "LPC812": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0+",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC81X"],
+        "is_disk_virtual": true,
+        "supported_toolchains": ["uARM", "IAR", "GCC_ARM"],
+        "inherits": ["LPCTarget"],
+        "progen": {
+            "target": "lpc812m101"
+        },
+        "detect_code": ["1050"],
+        "device_has": ["ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE"],
+        "default_build": "small",
+        "release": true
+    },
+    "LPC824": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0+",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC82X"],
+        "is_disk_virtual": true,
+        "supported_toolchains": ["uARM", "GCC_ARM", "GCC_CR", "IAR"],
+        "inherits": ["LPCTarget"],
+        "progen": {
+            "target": "lpc824m201"
+        },
+        "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "default_build": "small",
+        "release": true
+    },
+    "SSCI824": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0+",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC82X"],
+        "is_disk_virtual": true,
+        "supported_toolchains": ["uARM", "GCC_ARM"],
+        "progen": {
+            "target": "ssci824"
+        },
+        "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "default_build": "small",
+        "release": true
+    },
+    "LPC4088": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M4F",
+        "extra_labels": ["NXP", "LPC408X"],
+        "is_disk_virtual": true,
+        "supported_toolchains": ["ARM", "GCC_CR", "GCC_ARM", "IAR"],
+        "post_binary_hook": {
+            "function": "LPC4088Code.binary_hook",
+            "toolchains": ["ARM_STD", "ARM_MICRO"]
+        },
+        "progen": {"target": "lpc4088"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "LPC4088_DM": {
+        "inherits": ["LPC4088"],
+        "release": true
+    },
+    "LPC4330_M4": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M4F",
+        "progen": {"target": "lpc4330"},
+        "extra_labels": ["NXP", "LPC43XX", "LPC4330"],
+        "supported_toolchains": ["ARM", "GCC_CR", "IAR", "GCC_ARM"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+    },
+    "LPC4330_M0": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M0",
+        "extra_labels": ["NXP", "LPC43XX", "LPC4330"],
+        "supported_toolchains": ["ARM", "GCC_CR", "IAR"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "DEBUG_AWARENESS", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+    },
+    "LPC4337": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M4F",
+        "progen": {"target": "lpc4337"},
+        "extra_labels": ["NXP", "LPC43XX", "LPC4337"],
+        "supported_toolchains": ["ARM"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "DEBUG_AWARENESS", "ERROR_RED", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "LPC1800": {
+        "inherits": ["LPCTarget"],
+        "core": "Cortex-M3",
+        "extra_labels": ["NXP", "LPC43XX"],
+        "public": false,
+        "supported_toolchains": ["ARM", "GCC_CR", "IAR"]
+    },
+    "LPC11U37H_401": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC11UXX"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "GCC_CR"],
+        "inherits": ["LPCTarget"],
+        "progen": {
+            "target": "lpc11u37_401"
+        },
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "default_build": "small",
+        "release": true
+    },
+    "ELEKTOR_COCORICO": {
+        "core": "Cortex-M0+",
+        "default_toolchain": "uARM",
+        "extra_labels": ["NXP", "LPC81X"],
+        "supported_toolchains": ["uARM", "GCC_ARM", "IAR"],
+        "inherits": ["LPCTarget"],
+        "is_disk_virtual": true,
+        "detect_code": ["C000"],
+        "progen": {
+            "target": "cocorico"
+        },
+        "default_build": "small"
+    },
+    "KL05Z": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0+",
+        "default_toolchain": "uARM",
+        "extra_labels": ["Freescale", "KLXX"],
+        "is_disk_virtual": true,
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {
+            "target": "frdm-kl05z"
+        },
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "KL25Z": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0+",
+        "extra_labels": ["Freescale", "KLXX"],
+        "is_disk_virtual": true,
+        "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {"target": "frdm-kl25z"},
+        "detect_code": ["0200"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "KL26Z": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0+",
+        "extra_labels": ["Freescale", "KLXX"],
+        "is_disk_virtual": true,
+        "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {"target": "kl26z"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+    },
+    "KL43Z": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0+",
+        "extra_labels": ["Freescale", "KLXX"],
+        "is_disk_virtual": true,
+        "supported_toolchains": ["GCC_ARM", "ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "frdm-kl43z"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "KL46Z": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0+",
+        "extra_labels": ["Freescale", "KLXX"],
+        "is_disk_virtual": true,
+        "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {"target": "frdm-kl46z"},
+        "detect_code": ["0220"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "K20D50M": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4",
+        "extra_labels": ["Freescale", "K20XX"],
+        "is_disk_virtual": true,
+        "supported_toolchains": ["GCC_ARM", "ARM", "IAR"],
+        "progen": {"target": "frdm-k20d50m"},
+        "detect_code": ["0230"],
+        "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "TEENSY3_1": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4",
+        "extra_labels": ["Freescale", "K20XX", "K20DX256"],
+        "OUTPUT_EXT": "hex",
+        "is_disk_virtual": true,
+        "supported_toolchains": ["GCC_ARM", "ARM"],
+        "post_binary_hook": {
+            "function": "TEENSY3_1Code.binary_hook",
+            "toolchains": ["ARM_STD", "ARM_MICRO", "GCC_ARM"]
+        },
+        "progen": {"target": "teensy-31"},
+        "detect_code": ["0230"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SEMIHOST", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "K22F": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M4F",
+        "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+        "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM", "KPSDK_MCUS", "KPSDK_CODE"],
+        "is_disk_virtual": true,
+        "macros": ["CPU_MK22FN512VLH12", "FSL_RTOS_MBED"],
+        "inherits": ["Target"],
+        "progen": {"target": "frdm-k22f"},
+        "detect_code": ["0231"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "KL27Z": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0+",
+        "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM"],
+        "macros": ["CPU_MKL27Z64VLH4", "FSL_RTOS_MBED"],
+        "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+        "supported_form_factors": ["ARDUINO"],
+        "is_disk_virtual": true,
+        "default_toolchain": "ARM",
+        "detect_code": ["0261"],
+        "progen_target": {"target": "frdm-kl27z"},
+        "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "standard",
+        "release": true
+    },
+    "K64F": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M4F",
+        "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+        "extra_labels": ["Freescale", "KSDK2_MCUS", "FRDM", "KPSDK_MCUS", "KPSDK_CODE", "MCU_K64F"],
+        "is_disk_virtual": true,
+        "macros": ["CPU_MK64FN1M0VMD12", "FSL_RTOS_MBED", "MBEDTLS_ENTROPY_HARDWARE_ALT"],
+        "inherits": ["Target"],
+        "progen": {"target": "frdm-k64f"},
+        "detect_code": ["0240"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES", "STORAGE"],
+        "release": true
+    },
+    "MTS_GAMBIT": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "supported_toolchains": ["ARM", "GCC_ARM"],
+        "extra_labels": ["Freescale", "KSDK2_MCUS", "K64F", "KPSDK_MCUS", "KPSDK_CODE", "MCU_K64F"],
+        "is_disk_virtual": true,
+        "macros": ["CPU_MK64FN1M0VMD12", "FSL_RTOS_MBED", "TARGET_K64F"],
+        "progen": {"target": "mts-gambit"},
+        "device_has": ["I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+    },
+    "HEXIWEAR": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "extra_labels": ["Freescale", "KSDK2_MCUS", "K64F"],
+        "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+        "macros": ["CPU_MK64FN1M0VMD12", "FSL_RTOS_MBED", "TARGET_K64F"],
+        "is_disk_virtual": true,
+        "default_toolchain": "ARM",
+        "detect_code": ["0214"],
+        "progen": {"target": "hexiwear-k64f"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "standard"
+    },
+    "NUCLEO_F030R8": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F0", "STM32F030R8"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f030r8"},
+        "detect_code": ["0725"],
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F031K6": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F0", "STM32F031K6"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f031k6"},
+        "detect_code": ["0791"],
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "RTC_LSI", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F042K6": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F0", "STM32F042K6"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f042k6"},
+        "detect_code": ["0785"],
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "RTC_LSI", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F070RB": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F0", "STM32F070RB"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f070rb"},
+        "detect_code": ["0755"],
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F072RB": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F0", "STM32F072RB"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f072rb"},
+        "detect_code": ["0730"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F091RC": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F0", "STM32F091RC"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f091rc"},
+        "detect_code": ["0750"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F103RB": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M3",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F1", "STM32F103RB"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f103rb"},
+        "detect_code": ["0700"],
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F302R8": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F3", "STM32F302R8"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f302r8"},
+        "detect_code": ["0705"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F303K8": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F3", "STM32F303K8"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f303k8"},
+        "detect_code": ["0775"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F303RE": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F3", "STM32F303RE"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f303re"},
+        "detect_code": ["0745"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F334R8": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F3", "STM32F334R8"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f334r8"},
+        "detect_code": ["0735"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F401RE": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F4", "STM32F401RE"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f401re"},
+        "detect_code": ["0720"],
+        "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F410RB": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F4", "STM32F410RB"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f410rb"},
+        "detect_code": ["0740"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F411RE": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F4", "STM32F411RE"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f411re"},
+        "detect_code": ["0740"],
+        "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "ELMO_F411RE": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F4", "STM32F411RE"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+        "inherits": ["Target"],
+        "detect_code": ["----"],
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F429ZI": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F4", "STM32F429", "STM32F429ZI"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "progen": {"target": "nucleo-f429zi"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "RTC_LSI", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "detect_code": ["0796"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F446RE": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "ARM",
+        "extra_labels": ["STM", "STM32F4", "STM32F446RE"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f446re"},
+        "detect_code": ["0777"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "standard",
+        "release": true
+    },
+    "NUCLEO_F446ZE": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F4", "STM32F446ZE"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f446ze"},
+        "detect_code": ["0778"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+
+    "B96B_F446VE": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F4", "STM32F446VE"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "detect_code": ["0840"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_ASYNCH_DMA", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_F746ZG": {
+        "inherits": ["Target"],
+        "core": "Cortex-M7F",
+        "extra_labels": ["STM", "STM32F7", "STM32F746", "STM32F746ZG"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "default_toolchain": "ARM",
+        "progen": {
+            "target": "nucleo-f746zg",
+            "iar": {
+                "template": ["iar_nucleo_f746zg.ewp.tmpl"]
+            }
+        },
+        "supported_form_factors": ["ARDUINO"],
+        "detect_code": ["0816"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "NUCLEO_F767ZI": {
+        "inherits": ["Target"],
+        "core": "Cortex-M7FD",
+        "extra_labels": ["STM", "STM32F7", "STM32F767", "STM32F767ZI"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "default_toolchain": "ARM",
+        "progen": {"target": "nucleo-f767zi"},
+        "detect_code": ["0818"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "standard",
+        "release":true
+    },
+    "NUCLEO_L011K4": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0+",
+        "extra_labels": ["STM", "STM32L0", "STM32L011K4"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "default_toolchain": "uARM",
+        "supported_form_factors": ["ARDUINO"],
+        "detect_code": ["0780"],
+        "progen": {"target":"nucleo-l011k4"},
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+
+    "NUCLEO_L031K6": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0",
+        "extra_labels": ["STM", "STM32L0", "STM32L031K6"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "default_toolchain": "uARM",
+        "supported_form_factors": ["ARDUINO"],
+        "detect_code": ["0790"],
+        "progen": {"target": "nucleo-l031k6"},
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_L053R8": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M0+",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32L0", "STM32L053R8"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-l053r8"},
+        "detect_code": ["0715"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_L073RZ": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M0+",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32L0", "STM32L073RZ"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-l073rz"},
+        "detect_code": ["0760"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_L152RE": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M3",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32L1", "STM32L152RE"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-l152re"},
+        "detect_code": ["0710"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "NUCLEO_L432KC": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32L4", "STM32L432KC"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-l432kc"},
+        "detect_code": ["0770"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "NUCLEO_L476RG": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32L4", "STM32L476RG"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-l476rg"},
+        "detect_code": ["0765"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "STM32F3XX": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F3XX"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+        "default_build": "small"
+    },
+    "STM32F407": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "extra_labels": ["STM", "STM32F4", "STM32F4XX"],
+        "supported_toolchains": ["ARM", "GCC_ARM", "IAR"]
+    },
+    "ARCH_MAX": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M4F",
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+        "program_cycle_s": 2,
+        "extra_labels": ["STM", "STM32F4", "STM32F407", "STM32F407VG"],
+        "macros": ["LSI_VALUE=32000"],
+        "inherits": ["Target"],
+        "progen": {"target": "lpc1768"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "DISCO_F051R8": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F0", "STM32F051", "STM32F051R8"],
+        "supported_toolchains": ["GCC_ARM"],
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small"
+    },
+    "DISCO_F100RB": {
+        "inherits": ["Target"],
+        "core": "Cortex-M3",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F1", "STM32F100RB"],
+        "supported_toolchains": ["GCC_ARM"],
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small"
+    },
+    "DISCO_F303VC": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F3", "STM32F303", "STM32F303VC"],
+        "supported_toolchains": ["GCC_ARM"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "RTC_LSI", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small"
+    },
+    "DISCO_F334C8": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F3", "STM32F334C8"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "progen": {"target": "disco-f334c8"},
+        "detect_code": ["0810"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "RTC_LSI", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "DISCO_F407VG": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "progen": {"target": "disco-f407vg"},
+        "extra_labels": ["STM", "STM32F4", "STM32F407", "STM32F407VG"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"]
+    },
+    "DISCO_F429ZI": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F4", "STM32F429", "STM32F429ZI"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "progen": {"target": "disco-f429zi"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "RTC_LSI", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "DISCO_F469NI": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F4", "STM32F469", "STM32F469NI"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "disco-f469ni"},
+        "detect_code": ["0788"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "DISCO_L053C8": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0+",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32L0", "STM32L053C8"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "progen": {"target": "disco-l053c8"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "DISCO_F746NG": {
+        "inherits": ["Target"],
+        "core": "Cortex-M7F",
+        "extra_labels": ["STM", "STM32F7", "STM32F746", "STM32F746NG"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "default_toolchain": "ARM",
+        "progen": {"target": "disco-f746ng"},
+        "detect_code": ["0815"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "standard",
+        "release": true
+    },
+    "DISCO_L476VG": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32L4", "STM32L476VG"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "progen": {"target": "disco-l476vg"},
+        "detect_code": ["0820"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "MTS_MDOT_F405RG": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "extra_labels": ["STM", "STM32F4", "STM32F405RG"],
+        "is_disk_virtual": true,
+        "macros": ["HSE_VALUE=26000000", "OS_CLOCK=48000000"],
+        "progen": {"target": "mts-mdot-f405rg"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "MTS_MDOT_F411RE": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "extra_labels": ["STM", "STM32F4", "STM32F411RE"],
+        "macros": ["HSE_VALUE=26000000", "OS_CLOCK=96000000", "USE_PLL_HSE_EXTC=0", "VECT_TAB_OFFSET=0x00010000"],
+        "post_binary_hook": {
+            "function": "MTSCode.combine_bins_mts_dot",
+            "toolchains": ["GCC_ARM", "ARM_STD", "ARM_MICRO"]
+        },
+        "progen": {"target": "mts-mdot-f411re"},
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "MTS_DRAGONFLY_F411RE": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "extra_labels": ["STM", "STM32F4", "STM32F411RE"],
+        "macros": ["HSE_VALUE=26000000", "VECT_TAB_OFFSET=0x08010000"],
+        "post_binary_hook": {
+            "function": "MTSCode.combine_bins_mts_dragonfly",
+            "toolchains": ["GCC_ARM", "ARM_STD", "ARM_MICRO"]
+        },
+        "progen": {"target": "mts-dragonfly-f411re"},
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "MOTE_L152RC": {
+        "inherits": ["Target"],
+        "core": "Cortex-M3",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32L1", "STM32L152RC"],
+        "supported_toolchains": ["ARM", "uARM", "IAR", "GCC_ARM"],
+        "progen": {"target": "stm32l151rc"},
+        "detect_code": ["4100"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "RTC_LSI", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "release": true
+    },
+    "DISCO_F401VC": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "GCC_ARM",
+        "extra_labels": ["STM", "STM32F4", "STM32F401", "STM32F401VC"],
+        "supported_toolchains": ["GCC_ARM"],
+        "device_has": ["ANALOGIN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "standard"
+    },
+    "UBLOX_C029": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "extra_labels": ["STM", "STM32F4", "STM32F439", "STM32F439ZI"],
+        "macros": ["HSE_VALUE=24000000", "HSE_STARTUP_TIMEOUT=5000"],
+        "inherits": ["Target"],
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small"
+    },
+    "NZ32_SC151": {
+        "inherits": ["Target"],
+        "core": "Cortex-M3",
+        "default_toolchain": "uARM",
+        "program_cycle_s": 1.5,
+        "extra_labels": ["STM", "STM32L1", "STM32L151RC"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM"],
+        "progen": {"target": "stm32l151rc"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "RTC_LSI", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small"
+    },
+    "MCU_NRF51": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0",
+        "OVERRIDE_BOOTLOADER_FILENAME": "nrf51822_bootloader.hex",
+        "macros": ["NRF51", "TARGET_NRF51822"],
+        "MERGE_BOOTLOADER": false,
+        "extra_labels": ["NORDIC", "MCU_NRF51", "MCU_NRF51822"],
+        "OUTPUT_EXT": "hex",
+        "is_disk_virtual": true,
+        "supported_toolchains": ["ARM", "GCC_ARM"],
+        "public": false,
+        "MERGE_SOFT_DEVICE": true,
+        "EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
+            {
+                "boot": "s130_nrf51_1.0.0_bootloader.hex",
+                "name": "s130_nrf51_1.0.0_softdevice.hex",
+                "offset": 114688
+            },
+            {
+                "boot": "s110_nrf51822_8.0.0_bootloader.hex",
+                "name": "s110_nrf51822_8.0.0_softdevice.hex",
+                "offset": 98304
+            },
+            {
+                "boot": "s110_nrf51822_7.1.0_bootloader.hex",
+                "name": "s110_nrf51822_7.1.0_softdevice.hex",
+                "offset": 90112
+            },
+            {
+                "boot": "s110_nrf51822_7.0.0_bootloader.hex",
+                "name": "s110_nrf51822_7.0.0_softdevice.hex",
+                "offset": 90112
+            },
+            {
+                "boot": "s110_nrf51822_6.0.0_bootloader.hex",
+                "name": "s110_nrf51822_6.0.0_softdevice.hex",
+                "offset": 81920
+            }
+        ],
+        "detect_code": ["1070"],
+        "post_binary_hook": {
+            "function": "MCU_NRF51Code.binary_hook",
+            "toolchains": ["ARM_STD", "GCC_ARM"]
+        },
+        "program_cycle_s": 6,
+        "default_build": "small"
+    },
+    "MCU_NRF51_16K_BASE": {
+        "inherits": ["MCU_NRF51"],
+        "extra_labels_add": ["MCU_NORDIC_16K", "MCU_NRF51_16K"],
+        "macros_add": ["TARGET_MCU_NORDIC_16K", "TARGET_MCU_NRF51_16K"],
+        "public": false
+    },
+    "MCU_NRF51_16K_BOOT_BASE": {
+        "inherits": ["MCU_NRF51_16K_BASE"],
+        "MERGE_BOOTLOADER": true,
+        "extra_labels_add": ["MCU_NRF51_16K_BOOT"],
+        "macros_add": ["TARGET_MCU_NRF51_16K_BOOT", "TARGET_OTA_ENABLED"],
+        "public": false
+    },
+    "MCU_NRF51_16K_OTA_BASE": {
+        "inherits": ["MCU_NRF51_16K_BASE"],
+        "public": false,
+        "extra_labels_add": ["MCU_NRF51_16K_OTA"],
+        "macros_add": ["TARGET_MCU_NRF51_16K_OTA", "TARGET_OTA_ENABLED"],
+        "MERGE_SOFT_DEVICE": false
+    },
+    "MCU_NRF51_16K": {
+        "inherits": ["MCU_NRF51_16K_BASE"],
+        "extra_labels_add": ["MCU_NRF51_16K_S130"],
+        "macros_add": ["TARGET_MCU_NRF51_16K_S130"],
+        "public": false
+    },
+    "MCU_NRF51_S110": {
+        "extra_labels_add": ["MCU_NRF51_16K_S110"],
+        "macros_add": ["TARGET_MCU_NRF51_16K_S110"],
+        "EXPECTED_SOFTDEVICES_WITH_OFFSETS": [
+            {
+                "name": "s110_nrf51822_8.0.0_softdevice.hex",
+                "boot": "s110_nrf51822_8.0.0_bootloader.hex",
+                "offset": 98304
+            },
+            {
+                "name": "s110_nrf51822_7.1.0_softdevice.hex",
+                "boot": "s110_nrf51822_7.1.0_bootloader.hex",
+                "offset": 90112
+            }
+        ],
+        "public": false
+    },
+    "MCU_NRF51_16K_S110": {
+        "inherits": ["MCU_NRF51_S110", "MCU_NRF51_16K_BASE"],
+        "public": false
+    },
+    "MCU_NRF51_16K_BOOT": {
+        "inherits": ["MCU_NRF51_16K_BOOT_BASE"],
+        "extra_labels_add": ["MCU_NRF51_16K_S130"],
+        "macros_add": ["TARGET_MCU_NRF51_16K_S130"],
+        "public": false
+    },
+    "MCU_NRF51_16K_BOOT_S110": {
+        "inherits": ["MCU_NRF51_S110", "MCU_NRF51_16K_BOOT_BASE"],
+        "public": false
+    },
+    "MCU_NRF51_16K_OTA": {
+        "inherits": ["MCU_NRF51_16K_OTA_BASE"],
+        "extra_labels_add": ["MCU_NRF51_16K_S130"],
+        "macros_add": ["TARGET_MCU_NRF51_16K_S130"],
+        "public": false
+    },
+    "MCU_NRF51_16K_OTA_S110": {
+        "inherits": ["MCU_NRF51_S110", "MCU_NRF51_16K_OTA_BASE"],
+        "public": false
+    },
+    "MCU_NRF51_32K": {
+        "inherits": ["MCU_NRF51"],
+        "extra_labels_add": ["MCU_NORDIC_32K", "MCU_NRF51_32K"],
+        "macros_add": ["TARGET_MCU_NORDIC_32K", "TARGET_MCU_NRF51_32K"],
+        "public": false
+    },
+    "MCU_NRF51_32K_BOOT": {
+        "inherits": ["MCU_NRF51_32K"],
+        "MERGE_BOOTLOADER": true,
+        "extra_labels_add": ["MCU_NRF51_32K_BOOT"],
+        "macros_add": ["TARGET_MCU_NRF51_32K_BOOT", "TARGET_OTA_ENABLED"],
+        "public": false
+    },
+    "MCU_NRF51_32K_OTA": {
+        "inherits": ["MCU_NRF51_32K"],
+        "public": false,
+        "extra_labels_add": ["MCU_NRF51_32K_OTA"],
+        "macros_add": ["TARGET_MCU_NRF51_32K_OTA", "TARGET_OTA_ENABLED"],
+        "MERGE_SOFT_DEVICE": false
+    },
+    "NRF51822": {
+        "inherits": ["MCU_NRF51_16K"],
+        "progen": {"target": "mkit"},
+        "extra_labels_add": ["NRF51822", "NRF51822_MKIT"],
+        "macros_add": ["TARGET_NRF51822_MKIT"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "NRF51822_BOOT": {
+        "inherits": ["MCU_NRF51_16K_BOOT"],
+        "extra_labels_add": ["NRF51822", "NRF51822_MKIT"],
+        "macros_add": ["TARGET_NRF51822_MKIT"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+    },
+    "NRF51822_OTA": {
+        "inherits": ["MCU_NRF51_16K_OTA"],
+        "extra_labels_add": ["NRF51822", "NRF51822_MKIT"],
+        "macros_add": ["TARGET_NRF51822_MKIT"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+    },
+    "ARCH_BLE": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_NRF51_16K"],
+        "progen": {"target": "arch-ble"},
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "ARCH_BLE_BOOT": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_NRF51_16K_BOOT"],
+        "extra_labels_add": ["ARCH_BLE"],
+        "macros_add": ["TARGET_ARCH_BLE"]
+    },
+    "ARCH_BLE_OTA": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_NRF51_16K_OTA"],
+        "extra_labels_add": ["ARCH_BLE"],
+        "macros_add": ["TARGET_ARCH_BLE"]
+    },
+    "ARCH_LINK": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_NRF51_16K"],
+        "extra_labels_add": ["ARCH_BLE"],
+        "macros_add": ["TARGET_ARCH_BLE"]
+    },
+    "ARCH_LINK_BOOT": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_NRF51_16K_BOOT"],
+        "extra_labels_add": ["ARCH_BLE", "ARCH_LINK"],
+        "macros_add": ["TARGET_ARCH_BLE", "TARGET_ARCH_LINK"]
+    },
+    "ARCH_LINK_OTA": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_NRF51_16K_OTA"],
+        "extra_labels_add": ["ARCH_BLE", "ARCH_LINK"],
+        "macros_add": ["TARGET_ARCH_BLE", "TARGET_ARCH_LINK"]
+    },
+    "SEEED_TINY_BLE": {
+        "inherits": ["MCU_NRF51_16K"],
+        "progen": {"target": "seed-tinyble"},
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "SEEED_TINY_BLE_BOOT": {
+        "inherits": ["MCU_NRF51_16K_BOOT"],
+        "extra_labels_add": ["SEEED_TINY_BLE"],
+        "macros_add": ["TARGET_SEEED_TINY_BLE"]
+    },
+    "SEEED_TINY_BLE_OTA": {
+        "inherits": ["MCU_NRF51_16K_OTA"],
+        "extra_labels_add": ["SEEED_TINY_BLE"],
+        "macros_add": ["TARGET_SEEED_TINY_BLE"]
+    },
+    "HRM1017": {
+        "inherits": ["MCU_NRF51_16K"],
+        "progen": {"target": "hrm1017"},
+        "macros_add": ["TARGET_NRF_LFCLK_RC"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "HRM1017_BOOT": {
+        "inherits": ["MCU_NRF51_16K_BOOT"],
+        "extra_labels_add": ["HRM1017"],
+        "macros_add": ["TARGET_HRM1017", "TARGET_NRF_LFCLK_RC"]
+    },
+    "HRM1017_OTA": {
+        "inherits": ["MCU_NRF51_16K_OTA"],
+        "extra_labels_add": ["HRM1017"],
+        "macros_add": ["TARGET_HRM1017", "TARGET_NRF_LFCLK_RC"]
+    },
+    "RBLAB_NRF51822": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_NRF51_16K"],
+        "progen": {"target": "rblab-nrf51822"},
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "RBLAB_NRF51822_BOOT": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_NRF51_16K_BOOT"],
+        "extra_labels_add": ["RBLAB_NRF51822"],
+        "macros_add": ["TARGET_RBLAB_NRF51822"]
+    },
+    "RBLAB_NRF51822_OTA": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_NRF51_16K_OTA"],
+        "extra_labels_add": ["RBLAB_NRF51822"],
+        "macros_add": ["TARGET_RBLAB_NRF51822"]
+    },
+    "RBLAB_BLENANO": {
+        "inherits": ["MCU_NRF51_16K"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "RBLAB_BLENANO_BOOT": {
+        "inherits": ["MCU_NRF51_16K_BOOT"],
+        "extra_labels_add": ["RBLAB_BLENANO"],
+        "macros_add": ["TARGET_RBLAB_BLENANO"]
+    },
+    "RBLAB_BLENANO_OTA": {
+        "inherits": ["MCU_NRF51_16K_OTA"],
+        "extra_labels_add": ["RBLAB_BLENANO"],
+        "macros_add": ["TARGET_RBLAB_BLENANO"]
+    },
+    "NRF51822_Y5_MBUG": {
+        "inherits": ["MCU_NRF51_16K"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+    },
+    "WALLBOT_BLE": {
+        "inherits": ["MCU_NRF51_16K"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "WALLBOT_BLE_BOOT": {
+        "inherits": ["MCU_NRF51_16K_BOOT"],
+        "extra_labels_add": ["WALLBOT_BLE"],
+        "macros_add": ["TARGET_WALLBOT_BLE"]
+    },
+    "WALLBOT_BLE_OTA": {
+        "inherits": ["MCU_NRF51_16K_OTA"],
+        "extra_labels_add": ["WALLBOT_BLE"],
+        "macros_add": ["TARGET_WALLBOT_BLE"]
+    },
+    "DELTA_DFCM_NNN40": {
+        "inherits": ["MCU_NRF51_32K"],
+        "program_cycle_s": 10,
+        "progen": {"target": "dfcm-nnn40"},
+        "macros_add": ["TARGET_NRF_LFCLK_RC"],
+        "device_has": ["ANALOGIN", "DEBUG_AWARENESS", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "DELTA_DFCM_NNN40_BOOT": {
+        "inherits": ["MCU_NRF51_32K_BOOT"],
+        "program_cycle_s": 10,
+        "extra_labels_add": ["DELTA_DFCM_NNN40"],
+        "macros_add": ["TARGET_DELTA_DFCM_NNN40", "TARGET_NRF_LFCLK_RC"]
+    },
+    "DELTA_DFCM_NNN40_OTA": {
+        "inherits": ["MCU_NRF51_32K_OTA"],
+        "program_cycle_s": 10,
+        "extra_labels_add": ["DELTA_DFCM_NNN40"],
+        "macros_add": ["TARGET_DELTA_DFCM_NNN40", "TARGET_NRF_LFCLK_RC"]
+    },
+    "NRF51_DK": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_NRF51_32K"],
+        "progen": {"target": "nrf51-dk"},
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "NRF51_DK_BOOT": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_NRF51_32K_BOOT"],
+        "extra_labels_add": ["NRF51_DK"],
+        "macros_add": ["TARGET_NRF51_DK"]
+    },
+    "NRF51_DK_OTA": {
+        "supported_form_factors": ["ARDUINO"],
+        "inherits": ["MCU_NRF51_32K_OTA"],
+        "extra_labels_add": ["NRF51_DK"],
+        "macros_add": ["TARGET_NRF51_DK"]
+    },
+    "NRF51_DONGLE": {
+        "inherits": ["MCU_NRF51_32K"],
+        "progen": {"target": "nrf51-dongle"},
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "NRF51_DONGLE_BOOT": {
+        "inherits": ["MCU_NRF51_32K_BOOT"],
+        "extra_labels_add": ["NRF51_DONGLE"],
+        "macros_add": ["TARGET_NRF51_DONGLE"]
+    },
+    "NRF51_DONGLE_OTA": {
+        "inherits": ["MCU_NRF51_32K_OTA"],
+        "extra_labels_add": ["NRF51_DONGLE"],
+        "macros_add": ["TARGET_NRF51_DONGLE"]
+    },
+    "NRF51_MICROBIT": {
+        "inherits": ["MCU_NRF51_16K_S110"],
+        "macros_add": ["TARGET_NRF_LFCLK_RC"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "NRF51_MICROBIT_BOOT": {
+        "inherits": ["MCU_NRF51_16K_BOOT_S110"],
+        "extra_labels_add": ["NRF51_MICROBIT"],
+        "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
+    },
+    "NRF51_MICROBIT_OTA": {
+        "inherits": ["MCU_NRF51_16K_OTA_S110"],
+        "extra_labels_add": ["NRF51_MICROBIT"],
+        "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
+    },
+    "NRF51_MICROBIT_B": {
+        "inherits": ["MCU_NRF51_16K"],
+        "extra_labels_add": ["NRF51_MICROBIT"],
+        "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "NRF51_MICROBIT_B_BOOT": {
+        "inherits": ["MCU_NRF51_16K_BOOT"],
+        "extra_labels_add": ["NRF51_MICROBIT"],
+        "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
+    },
+    "NRF51_MICROBIT_B_OTA": {
+        "inherits": ["MCU_NRF51_16K_OTA"],
+        "extra_labels_add": ["NRF51_MICROBIT"],
+        "macros_add": ["TARGET_NRF51_MICROBIT", "TARGET_NRF_LFCLK_RC"]
+    },
+    "TY51822R3": {
+        "inherits": ["MCU_NRF51_32K"],
+        "macros_add": ["TARGET_NRF_32MHZ_XTAL"],
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"],
+        "release": true
+    },
+    "TY51822R3_BOOT": {
+        "inherits": ["MCU_NRF51_32K_BOOT"],
+        "extra_labels_add": ["TY51822R3"],
+        "macros_add": ["TARGET_TY51822R3", "TARGET_NRF_32MHZ_XTAL"]
+    },
+    "TY51822R3_OTA": {
+        "inherits": ["MCU_NRF51_32K_OTA"],
+        "extra_labels_add": ["NRF51_DK"],
+        "macros_add": ["TARGET_TY51822R3", "TARGET_NRF_32MHZ_XTAL"]
+    },
+    "ARM_MPS2_Target": {
+        "inherits": ["Target"],
+        "public": false,
+        "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"]
+    },
+    "ARM_MPS2_M0": {
+        "inherits": ["ARM_MPS2_Target"],
+        "core": "Cortex-M0",
+        "supported_toolchains": ["ARM"],
+        "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M0"],
+        "macros": ["CMSDK_CM0"],
+        "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+        "release": true
+    },
+    "ARM_MPS2_M0P": {
+        "inherits": ["ARM_MPS2_Target"],
+        "core": "Cortex-M0+",
+        "supported_toolchains": ["ARM"],
+        "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M0P"],
+        "macros": ["CMSDK_CM0plus"],
+        "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+        "release": true
+    },
+    "ARM_MPS2_M1": {
+        "inherits": ["ARM_MPS2_Target"],
+        "core": "Cortex-M1",
+        "supported_toolchains": ["ARM"],
+        "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M1"],
+        "macros": ["CMSDK_CM1"],
+        "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"]
+    },
+    "ARM_MPS2_M3": {
+        "inherits": ["ARM_MPS2_Target"],
+        "core": "Cortex-M3",
+        "supported_toolchains": ["ARM"],
+        "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M3"],
+        "macros": ["CMSDK_CM3"],
+        "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+        "release": true
+    },
+    "ARM_MPS2_M4": {
+        "inherits": ["ARM_MPS2_Target"],
+        "core": "Cortex-M4F",
+        "supported_toolchains": ["ARM"],
+        "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M4"],
+        "macros": ["CMSDK_CM4"],
+        "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+        "release": true
+    },
+    "ARM_MPS2_M7": {
+        "inherits": ["ARM_MPS2_Target"],
+        "core": "Cortex-M7",
+        "supported_toolchains": ["ARM"],
+        "extra_labels": ["ARM_SSG", "MPS2", "MPS2_M7"],
+        "macros": ["CMSDK_CM7"],
+        "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+        "release": true
+    },
+    "ARM_IOTSS_Target": {
+        "inherits": ["Target"],
+        "public": false,
+        "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"]
+    },
+    "ARM_IOTSS_BEID": {
+        "inherits": ["ARM_IOTSS_Target"],
+        "core": "Cortex-M3",
+        "supported_toolchains": ["ARM"],
+        "extra_labels": ["ARM_SSG", "IOTSS", "IOTSS_BEID"],
+        "macros": ["CMSDK_BEID"],
+        "device_has": ["AACI", "ANALOGIN", "CLCD", "ETHERNET", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "TSC"],
+        "release": true
+    },
+    "ARM_BEETLE_SOC": {
+        "inherits": ["ARM_IOTSS_Target"],
+        "core": "Cortex-M3",
+        "supported_toolchains": ["ARM", "GCC_ARM"],
+        "default_toolchain": "ARM",
+        "extra_labels": ["ARM_SSG", "BEETLE"],
+        "macros": ["CMSDK_BEETLE", "WSF_MS_PER_TICK=20", "WSF_TOKEN_ENABLED=FALSE", "WSF_TRACE_ENABLED=TRUE", "WSF_ASSERT_ENABLED=FALSE", "WSF_PRINTF_MAX_LEN=128", "ASIC", "CONFIG_HOST_REV=0x20", "CONFIG_ALLOW_DEEP_SLEEP=FALSE", "HCI_VS_TARGET", "CONFIG_ALLOW_SETTING_WRITE=TRUE", "WSF_MAX_HANDLERS=20", "NO_LEDS"],
+        "progen": {
+            "target": "beetle",
+            "uvision5": {
+                "template": ["uvision5_arm_beetle_soc.uvproj.tmpl"]
+            }
+        },
+        "device_has": ["ANALOGIN", "CLCD", "I2C", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "SERIAL", "SPI"],
+        "release": true
+    },
+    "RZ_A1H": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-A9",
+        "program_cycle_s": 2,
+        "extra_labels": ["RENESAS", "MBRZA1H"],
+        "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {
+            "target": "gr-peach",
+            "iar": {
+                "template": ["iar_rz_a1h.ewp.tmpl"]
+            }
+        },
+        "device_has": ["ANALOGIN", "CAN", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "VK_RZ_A1H": {
+        "inherits": ["Target"],
+        "core": "Cortex-A9",
+        "extra_labels": ["RENESAS", "VKRZA1H"],
+        "supported_toolchains": ["ARM", "GCC_ARM", "IAR"],
+        "default_toolchain": "ARM",
+        "progen": {
+            "target": "vk-rza1h",
+            "iar": {
+                "template": ["iar_rz_a1h.ewp.tmpl"]
+            }
+        },
+        "program_cycle_s": 2,
+        "device_has": ["ANALOGIN", "CAN", "ERROR_PATTERN", "ETHERNET", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "standard"
+    },
+    "MAXWSNENV": {
+        "inherits": ["Target"],
+        "core": "Cortex-M3",
+        "macros": ["__SYSTEM_HFX=24000000"],
+        "extra_labels": ["Maxim", "MAX32610"],
+        "supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
+        "progen": {"target": "maxwsnenv"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "MAX32600MBED": {
+        "inherits": ["Target"],
+        "core": "Cortex-M3",
+        "macros": ["__SYSTEM_HFX=24000000"],
+        "extra_labels": ["Maxim", "MAX32600"],
+        "supported_toolchains": ["GCC_ARM", "IAR", "ARM"],
+        "progen": {"target": "max32600mbed"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_FC", "SLEEP", "SPI", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "EFM32GG_STK3700": {
+        "inherits": ["Target"],
+        "core": "Cortex-M3",
+        "macros": ["EFM32GG990F1024"],
+        "extra_labels": ["Silicon_Labs", "EFM32"],
+        "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+        "progen": {"target": "efm32gg-stk"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+        "forced_reset_timeout": 2,
+        "release": true
+    },
+    "EFM32LG_STK3600": {
+        "inherits": ["Target"],
+        "core": "Cortex-M3",
+        "macros": ["EFM32LG990F256"],
+        "extra_labels": ["Silicon_Labs", "EFM32"],
+        "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+        "progen": {"target": "efm32lg-stk"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+        "forced_reset_timeout": 2,
+        "release": true
+    },
+    "EFM32WG_STK3800": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "macros": ["EFM32WG990F256"],
+        "extra_labels": ["Silicon_Labs", "EFM32"],
+        "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+        "progen": {"target": "efm32wg-stk"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+        "forced_reset_timeout": 2,
+        "release": true
+    },
+    "EFM32ZG_STK3200": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0+",
+        "default_toolchain": "uARM",
+        "supported_toolchains": ["GCC_ARM", "uARM"],
+        "extra_labels": ["Silicon_Labs", "EFM32"],
+        "macros": ["EFM32ZG222F32"],
+        "progen": {
+            "target": "efm32zg-stk"
+        },
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "forced_reset_timeout": 2,
+        "release": true
+    },
+    "EFM32HG_STK3400": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0+",
+        "default_toolchain": "uARM",
+        "supported_toolchains": ["GCC_ARM", "uARM"],
+        "extra_labels": ["Silicon_Labs", "EFM32"],
+        "macros": ["EFM32HG322F64"],
+        "progen": {
+            "target": "efm32hg-stk"
+        },
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+        "default_build": "small",
+        "forced_reset_timeout": 2,
+        "release": true
+    },
+    "EFM32PG_STK3401": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4F",
+        "macros": ["EFM32PG1B200F256GM48"],
+        "extra_labels": ["Silicon_Labs", "EFM32"],
+        "supported_toolchains": ["GCC_ARM", "ARM", "uARM", "IAR"],
+        "progen": {"target": "efm32pg-stk"},
+        "device_has": ["ANALOGIN", "ERROR_PATTERN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH", "STDIO_MESSAGES"],
+        "forced_reset_timeout": 2,
+        "release": true
+    },
+    "WIZWIKI_W7500": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0",
+        "extra_labels": ["WIZNET", "W7500x", "WIZwiki_W7500"],
+        "supported_toolchains": ["uARM", "ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "wizwiki-w7500"},
+        "device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "WIZWIKI_W7500P": {
+        "supported_form_factors": ["ARDUINO"],
+        "core": "Cortex-M0",
+        "extra_labels": ["WIZNET", "W7500x", "WIZwiki_W7500P"],
+        "supported_toolchains": ["uARM", "ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "wizwiki-w7500p"},
+        "device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "WIZWIKI_W7500ECO": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0",
+        "progen": {"target": "wizwiki_w7500eco"},
+        "extra_labels": ["WIZNET", "W7500x", "WIZwiki_W7500ECO"],
+        "supported_toolchains": ["uARM", "ARM"],
+        "device_has": ["ANALOGIN", "I2C", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "release": true
+    },
+    "SAMR21G18A": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0+",
+        "macros": ["__SAMR21G18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+        "extra_labels": ["Atmel", "SAM_CortexM0P", "SAMR21"],
+        "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+        "progen": {"target": "samr21g18a"},
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+        "release": true
+    },
+    "SAMD21J18A": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0+",
+        "macros": ["__SAMD21J18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+        "extra_labels": ["Atmel", "SAM_CortexM0P", "SAMD21"],
+        "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+        "progen": {"target": "samd21j18a"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+        "release": true
+    },
+    "SAMD21G18A": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0+",
+        "macros": ["__SAMD21G18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+        "extra_labels": ["Atmel", "SAM_CortexM0P", "SAMD21"],
+        "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+        "progen": {"target": "samd21g18a"},
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+        "release": true
+    },
+    "SAML21J18A": {
+        "inherits": ["Target"],
+        "core": "Cortex-M0+",
+        "macros": ["__SAML21J18A__", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+        "extra_labels": ["Atmel", "SAM_CortexM0P", "SAML21"],
+        "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+        "progen": {"target": "samr21j18a"},
+        "progen_target": "samr21j18a",
+        "device_has": ["ANALOGIN", "ANALOGOUT", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"]
+    },
+    "SAMG55J19": {
+        "inherits": ["Target"],
+        "core": "Cortex-M4",
+        "extra_labels": ["Atmel", "SAM_CortexM4", "SAMG55"],
+        "macros": ["__SAMG55J19__", "BOARD=75", "I2C_MASTER_CALLBACK_MODE=true", "EXTINT_CALLBACK_MODE=true", "USART_CALLBACK_MODE=true", "TC_ASYNC=true"],
+        "supported_toolchains": ["GCC_ARM", "ARM", "uARM"],
+        "default_toolchain": "ARM",
+        "progen": {"target": "samg55j19"},
+        "progen_target": "samg55j19",
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "I2C_ASYNCH", "INTERRUPTIN", "LOWPOWERTIMER", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SERIAL_ASYNCH", "SERIAL_FC", "SLEEP", "SPI", "SPISLAVE", "SPI_ASYNCH"],
+        "default_build": "standard"
+    },
+    "BLUEPILL_F103C8": {
+        "core": "Cortex-M3",
+        "default_toolchain": "GCC_ARM",
+        "extra_labels": ["STM", "STM32F1", "STM32F103C8"],
+        "supported_toolchains": ["GCC_ARM"],
+        "inherits": ["Target"],
+        "progen": {"target": "bluepill-f103c8"},
+        "device_has": ["ANALOGIN", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "SERIAL", "SLEEP", "SPI", "SPISLAVE"]
+    }
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/ticker_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,108 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_TICKER_API_H
+#define MBED_TICKER_API_H
+
+#include "device.h"
+
+typedef uint32_t timestamp_t;
+
+/** Ticker's event structure
+ */
+typedef struct ticker_event_s {
+    timestamp_t            timestamp; /**< Event's timestamp */
+    uint32_t               id;        /**< TimerEvent object */
+    struct ticker_event_s *next;      /**< Next event in the queue */
+} ticker_event_t;
+
+typedef void (*ticker_event_handler)(uint32_t id);
+
+/** Ticker's interface structure - required API for a ticker
+ */
+typedef struct {
+    void (*init)(void);                           /**< Init function */
+    uint32_t (*read)(void);                       /**< Read function */
+    void (*disable_interrupt)(void);              /**< Disable interrupt function */
+    void (*clear_interrupt)(void);                /**< Clear interrupt function */
+    void (*set_interrupt)(timestamp_t timestamp); /**< Set interrupt function */
+} ticker_interface_t;
+
+/** Tickers events queue structure
+ */
+typedef struct {
+    ticker_event_handler event_handler; /**< Event handler */
+    ticker_event_t *head;               /**< A pointer to head */
+} ticker_event_queue_t;
+
+/** Tickers data structure
+ */
+typedef struct {
+    const ticker_interface_t *interface; /**< Ticker's interface */
+    ticker_event_queue_t *queue;         /**< Ticker's events queue */
+} ticker_data_t;
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Initialize a ticker and sets the event handler
+ *
+ * @param data    The ticker's data
+ * @param handler A handler to be set
+ */
+void ticker_set_handler(const ticker_data_t *const data, ticker_event_handler handler);
+
+/** Irq handler which goes through the events to trigger events in the past.
+ *
+ * @param data    The ticker's data
+ */
+void ticker_irq_handler(const ticker_data_t *const data);
+
+/** Remove an event from the queue
+ *
+ * @param data The ticker's data
+ * @param obj  The event's queue to be removed
+ */
+void ticker_remove_event(const ticker_data_t *const data, ticker_event_t *obj);
+
+/** Insert an event from the queue
+ *
+ * @param data      The ticker's data
+ * @param obj       The event's queue to be removed
+ * @param timestamp The event's timestamp
+ * @param id        The event object
+ */
+void ticker_insert_event(const ticker_data_t *const data, ticker_event_t *obj, timestamp_t timestamp, uint32_t id);
+
+/** Read the current ticker's timestamp
+ *
+ * @param data The ticker's data
+ * @return The current timestamp
+ */
+timestamp_t ticker_read(const ticker_data_t *const data);
+
+/** Read the next event's timestamp
+ *
+ * @param data The ticker's data
+ * @return 1 if timestamp is pending event, 0 if there's no event pending
+ */
+int ticker_get_next_timestamp(const ticker_data_t *const data, timestamp_t *timestamp);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/hal/us_ticker_api.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,78 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_US_TICKER_API_H
+#define MBED_US_TICKER_API_H
+
+#include <stdint.h>
+#include "ticker_api.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup UsTicker Microseconds Ticker Functions
+ * @{
+ */
+
+/** Get ticker's data
+ *
+ * @return The low power ticker data
+ */
+const ticker_data_t* get_us_ticker_data(void);
+
+
+/** The wrapper for ticker_irq_handler, to pass us ticker's data
+ *
+ */
+void us_ticker_irq_handler(void);
+
+/* HAL us ticker */
+
+/** Initialize the ticker
+ *
+ */
+void us_ticker_init(void);
+
+/** Read the current counter
+ *
+ * @return The current timer's counter value in microseconds
+ */
+uint32_t us_ticker_read(void);
+
+/** Set interrupt for specified timestamp
+ *
+ * @param timestamp The time in microseconds to be set
+ */
+void us_ticker_set_interrupt(timestamp_t timestamp);
+
+/** Disable us ticker interrupt
+ *
+ */
+void us_ticker_disable_interrupt(void);
+
+/** Clear us ticker interrupt
+ *
+ */
+void us_ticker_clear_interrupt(void);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/Release_Notes_stm32f7xx_hal.html	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,817 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40"><head>
+<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
+<link rel="File-List" href="Release_Notes_for_STM32F45x_StdPeriph_Driver_files/filelist.xml">
+<link rel="Edit-Time-Data" href="Release_Notes_for_STM32F45x_StdPeriph_Driver_files/editdata.mso"><!--[if !mso]> <style> v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} </style> <![endif]-->
+
+
+
+<title>Release Notes for STM32F7xx HAL Drivers</title><!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Author>STMicroelectronics</o:Author> <o:LastAuthor>Raouf Hosni</o:LastAuthor> <o:Revision>39</o:Revision> <o:TotalTime>137</o:TotalTime> <o:Created>2009-02-27T19:26:00Z</o:Created> <o:LastSaved>2010-10-15T11:07:00Z</o:LastSaved> <o:Pages>3</o:Pages> <o:Words>973</o:Words> <o:Characters>5548</o:Characters> <o:Company>STMicroelectronics</o:Company> <o:Lines>46</o:Lines> <o:Paragraphs>13</o:Paragraphs> <o:CharactersWithSpaces>6508</o:CharactersWithSpaces> <o:Version>12.00</o:Version> </o:DocumentProperties> </xml><![endif]--><link rel="themeData" href="Release_Notes_for_STM32F45x_StdPeriph_Driver_files/themedata.thmx">
+<link rel="colorSchemeMapping" href="Release_Notes_for_STM32F45x_StdPeriph_Driver_files/colorschememapping.xml"><!--[if gte mso 9]><xml> <w:WordDocument> <w:Zoom>110</w:Zoom> <w:TrackMoves>false</w:TrackMoves> <w:TrackFormatting/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid> <w:IgnoreMixedContent>false</w:IgnoreMixedContent> <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText> <w:DoNotPromoteQF/> <w:LidThemeOther>EN-US</w:LidThemeOther> <w:LidThemeAsian>X-NONE</w:LidThemeAsian> <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript> <w:Compatibility> <w:BreakWrappedTables/> <w:SnapToGridInCell/> <w:WrapTextWithPunct/> <w:UseAsianBreakRules/> <w:DontGrowAutofit/> <w:SplitPgBreakAndParaMark/> <w:DontVertAlignCellWithSp/> <w:DontBreakConstrainedForcedTables/> <w:DontVertAlignInTxbx/> <w:Word11KerningPairs/> <w:CachedColBalance/> </w:Compatibility> <w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel> <m:mathPr> <m:mathFont m:val="Cambria Math"/> <m:brkBin m:val="before"/> <m:brkBinSub m:val="&#45;-"/> <m:smallFrac m:val="off"/> <m:dispDef/> <m:lMargin m:val="0"/> <m:rMargin m:val="0"/> <m:defJc m:val="centerGroup"/> <m:wrapIndent m:val="1440"/> <m:intLim m:val="subSup"/> <m:naryLim m:val="undOvr"/> </m:mathPr></w:WordDocument> </xml><![endif]--><!--[if gte mso 9]><xml> <w:LatentStyles DefLockedState="false" DefUnhideWhenUsed="false" DefSemiHidden="false" DefQFormat="false" LatentStyleCount="267"> <w:LsdException Locked="false" QFormat="true" Name="Normal"/> <w:LsdException Locked="false" QFormat="true" Name="heading 1"/> <w:LsdException Locked="false" QFormat="true" Name="heading 2"/> <w:LsdException Locked="false" QFormat="true" Name="heading 3"/> <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true" QFormat="true" Name="heading 4"/> <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true" QFormat="true" Name="heading 5"/> <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true" QFormat="true" Name="heading 6"/> <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true" QFormat="true" Name="heading 7"/> <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true" QFormat="true" Name="heading 8"/> <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true" QFormat="true" Name="heading 9"/> <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true" QFormat="true" Name="caption"/> <w:LsdException Locked="false" QFormat="true" Name="Title"/> <w:LsdException Locked="false" Priority="1" Name="Default Paragraph Font"/> <w:LsdException Locked="false" QFormat="true" Name="Subtitle"/> <w:LsdException Locked="false" QFormat="true" Name="Strong"/> <w:LsdException Locked="false" QFormat="true" Name="Emphasis"/> <w:LsdException Locked="false" Priority="99" Name="No List"/> <w:LsdException Locked="false" Priority="99" SemiHidden="true" Name="Placeholder Text"/> <w:LsdException Locked="false" Priority="1" QFormat="true" Name="No Spacing"/> <w:LsdException Locked="false" Priority="60" Name="Light Shading"/> <w:LsdException Locked="false" Priority="61" Name="Light List"/> <w:LsdException Locked="false" Priority="62" Name="Light Grid"/> <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1"/> <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2"/> <w:LsdException Locked="false" Priority="65" Name="Medium List 1"/> <w:LsdException Locked="false" Priority="66" Name="Medium List 2"/> <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1"/> <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2"/> <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3"/> <w:LsdException Locked="false" Priority="70" Name="Dark List"/> <w:LsdException Locked="false" Priority="71" Name="Colorful Shading"/> <w:LsdException Locked="false" Priority="72" Name="Colorful List"/> <w:LsdException Locked="false" Priority="73" Name="Colorful Grid"/> <w:LsdException Locked="false" Priority="60" Name="Light Shading Accent 1"/> <w:LsdException Locked="false" Priority="61" Name="Light List Accent 1"/> <w:LsdException Locked="false" Priority="62" Name="Light Grid Accent 1"/> <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1 Accent 1"/> <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2 Accent 1"/> <w:LsdException Locked="false" Priority="65" Name="Medium List 1 Accent 1"/> <w:LsdException Locked="false" Priority="99" SemiHidden="true" Name="Revision"/> <w:LsdException Locked="false" Priority="34" QFormat="true" Name="List Paragraph"/> <w:LsdException Locked="false" Priority="29" QFormat="true" Name="Quote"/> <w:LsdException Locked="false" Priority="30" QFormat="true" Name="Intense Quote"/> <w:LsdException Locked="false" Priority="66" Name="Medium List 2 Accent 1"/> <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1 Accent 1"/> <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2 Accent 1"/> <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3 Accent 1"/> <w:LsdException Locked="false" Priority="70" Name="Dark List Accent 1"/> <w:LsdException Locked="false" Priority="71" Name="Colorful Shading Accent 1"/> <w:LsdException Locked="false" Priority="72" Name="Colorful List Accent 1"/> <w:LsdException Locked="false" Priority="73" Name="Colorful Grid Accent 1"/> <w:LsdException Locked="false" Priority="60" Name="Light Shading Accent 2"/> <w:LsdException Locked="false" Priority="61" Name="Light List Accent 2"/> <w:LsdException Locked="false" Priority="62" Name="Light Grid Accent 2"/> <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1 Accent 2"/> <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2 Accent 2"/> <w:LsdException Locked="false" Priority="65" Name="Medium List 1 Accent 2"/> <w:LsdException Locked="false" Priority="66" Name="Medium List 2 Accent 2"/> <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1 Accent 2"/> <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2 Accent 2"/> <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3 Accent 2"/> <w:LsdException Locked="false" Priority="70" Name="Dark List Accent 2"/> <w:LsdException Locked="false" Priority="71" Name="Colorful Shading Accent 2"/> <w:LsdException Locked="false" Priority="72" Name="Colorful List Accent 2"/> <w:LsdException Locked="false" Priority="73" Name="Colorful Grid Accent 2"/> <w:LsdException Locked="false" Priority="60" Name="Light Shading Accent 3"/> <w:LsdException Locked="false" Priority="61" Name="Light List Accent 3"/> <w:LsdException Locked="false" Priority="62" Name="Light Grid Accent 3"/> <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1 Accent 3"/> <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2 Accent 3"/> <w:LsdException Locked="false" Priority="65" Name="Medium List 1 Accent 3"/> <w:LsdException Locked="false" Priority="66" Name="Medium List 2 Accent 3"/> <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1 Accent 3"/> <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2 Accent 3"/> <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3 Accent 3"/> <w:LsdException Locked="false" Priority="70" Name="Dark List Accent 3"/> <w:LsdException Locked="false" Priority="71" Name="Colorful Shading Accent 3"/> <w:LsdException Locked="false" Priority="72" Name="Colorful List Accent 3"/> <w:LsdException Locked="false" Priority="73" Name="Colorful Grid Accent 3"/> <w:LsdException Locked="false" Priority="60" Name="Light Shading Accent 4"/> <w:LsdException Locked="false" Priority="61" Name="Light List Accent 4"/> <w:LsdException Locked="false" Priority="62" Name="Light Grid Accent 4"/> <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1 Accent 4"/> <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2 Accent 4"/> <w:LsdException Locked="false" Priority="65" Name="Medium List 1 Accent 4"/> <w:LsdException Locked="false" Priority="66" Name="Medium List 2 Accent 4"/> <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1 Accent 4"/> <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2 Accent 4"/> <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3 Accent 4"/> <w:LsdException Locked="false" Priority="70" Name="Dark List Accent 4"/> <w:LsdException Locked="false" Priority="71" Name="Colorful Shading Accent 4"/> <w:LsdException Locked="false" Priority="72" Name="Colorful List Accent 4"/> <w:LsdException Locked="false" Priority="73" Name="Colorful Grid Accent 4"/> <w:LsdException Locked="false" Priority="60" Name="Light Shading Accent 5"/> <w:LsdException Locked="false" Priority="61" Name="Light List Accent 5"/> <w:LsdException Locked="false" Priority="62" Name="Light Grid Accent 5"/> <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1 Accent 5"/> <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2 Accent 5"/> <w:LsdException Locked="false" Priority="65" Name="Medium List 1 Accent 5"/> <w:LsdException Locked="false" Priority="66" Name="Medium List 2 Accent 5"/> <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1 Accent 5"/> <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2 Accent 5"/> <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3 Accent 5"/> <w:LsdException Locked="false" Priority="70" Name="Dark List Accent 5"/> <w:LsdException Locked="false" Priority="71" Name="Colorful Shading Accent 5"/> <w:LsdException Locked="false" Priority="72" Name="Colorful List Accent 5"/> <w:LsdException Locked="false" Priority="73" Name="Colorful Grid Accent 5"/> <w:LsdException Locked="false" Priority="60" Name="Light Shading Accent 6"/> <w:LsdException Locked="false" Priority="61" Name="Light List Accent 6"/> <w:LsdException Locked="false" Priority="62" Name="Light Grid Accent 6"/> <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1 Accent 6"/> <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2 Accent 6"/> <w:LsdException Locked="false" Priority="65" Name="Medium List 1 Accent 6"/> <w:LsdException Locked="false" Priority="66" Name="Medium List 2 Accent 6"/> <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1 Accent 6"/> <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2 Accent 6"/> <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3 Accent 6"/> <w:LsdException Locked="false" Priority="70" Name="Dark List Accent 6"/> <w:LsdException Locked="false" Priority="71" Name="Colorful Shading Accent 6"/> <w:LsdException Locked="false" Priority="72" Name="Colorful List Accent 6"/> <w:LsdException Locked="false" Priority="73" Name="Colorful Grid Accent 6"/> <w:LsdException Locked="false" Priority="19" QFormat="true" Name="Subtle Emphasis"/> <w:LsdException Locked="false" Priority="21" QFormat="true" Name="Intense Emphasis"/> <w:LsdException Locked="false" Priority="31" QFormat="true" Name="Subtle Reference"/> <w:LsdException Locked="false" Priority="32" QFormat="true" Name="Intense Reference"/> <w:LsdException Locked="false" Priority="33" QFormat="true" Name="Book Title"/> <w:LsdException Locked="false" Priority="37" SemiHidden="true" UnhideWhenUsed="true" Name="Bibliography"/> <w:LsdException Locked="false" Priority="39" SemiHidden="true" UnhideWhenUsed="true" QFormat="true" Name="TOC Heading"/> </w:LatentStyles> </xml><![endif]-->
+
+<style>
+<!--
+/* Font Definitions */
+@font-face
+{font-family:"Cambria Math";
+panose-1:2 4 5 3 5 4 6 3 2 4;
+mso-font-charset:1;
+mso-generic-font-family:roman;
+mso-font-format:other;
+mso-font-pitch:variable;
+mso-font-signature:0 0 0 0 0 0;}
+@font-face
+{font-family:Calibri;
+panose-1:2 15 5 2 2 2 4 3 2 4;
+mso-font-charset:0;
+mso-generic-font-family:swiss;
+mso-font-pitch:variable;
+mso-font-signature:-1610611985 1073750139 0 0 159 0;}
+@font-face
+{font-family:Tahoma;
+panose-1:2 11 6 4 3 5 4 4 2 4;
+mso-font-charset:0;
+mso-generic-font-family:swiss;
+mso-font-pitch:variable;
+mso-font-signature:1627400839 -2147483648 8 0 66047 0;}
+@font-face
+{font-family:Verdana;
+panose-1:2 11 6 4 3 5 4 4 2 4;
+mso-font-charset:0;
+mso-generic-font-family:swiss;
+mso-font-pitch:variable;
+mso-font-signature:536871559 0 0 0 415 0;}
+/* Style Definitions */
+p.MsoNormal, li.MsoNormal, div.MsoNormal
+{mso-style-unhide:no;
+mso-style-qformat:yes;
+mso-style-parent:"";
+margin:0in;
+margin-bottom:.0001pt;
+mso-pagination:widow-orphan;
+font-size:12.0pt;
+font-family:"Times New Roman","serif";
+mso-fareast-font-family:"Times New Roman";}
+h1
+{mso-style-unhide:no;
+mso-style-qformat:yes;
+mso-style-link:"Heading 1 Char";
+mso-margin-top-alt:auto;
+margin-right:0in;
+mso-margin-bottom-alt:auto;
+margin-left:0in;
+mso-pagination:widow-orphan;
+mso-outline-level:1;
+font-size:24.0pt;
+font-family:"Times New Roman","serif";
+mso-fareast-font-family:"Times New Roman";
+mso-fareast-theme-font:minor-fareast;
+font-weight:bold;}
+h2
+{mso-style-unhide:no;
+mso-style-qformat:yes;
+mso-style-link:"Heading 2 Char";
+mso-style-next:Normal;
+margin-top:12.0pt;
+margin-right:0in;
+margin-bottom:3.0pt;
+margin-left:0in;
+mso-pagination:widow-orphan;
+page-break-after:avoid;
+mso-outline-level:2;
+font-size:14.0pt;
+font-family:"Arial","sans-serif";
+mso-fareast-font-family:"Times New Roman";
+mso-fareast-theme-font:minor-fareast;
+font-weight:bold;
+font-style:italic;}
+h3
+{mso-style-unhide:no;
+mso-style-qformat:yes;
+mso-style-link:"Heading 3 Char";
+mso-margin-top-alt:auto;
+margin-right:0in;
+mso-margin-bottom-alt:auto;
+margin-left:0in;
+mso-pagination:widow-orphan;
+mso-outline-level:3;
+font-size:13.5pt;
+font-family:"Times New Roman","serif";
+mso-fareast-font-family:"Times New Roman";
+mso-fareast-theme-font:minor-fareast;
+font-weight:bold;}
+a:link, span.MsoHyperlink
+{mso-style-unhide:no;
+color:blue;
+text-decoration:underline;
+text-underline:single;}
+a:visited, span.MsoHyperlinkFollowed
+{mso-style-unhide:no;
+color:blue;
+text-decoration:underline;
+text-underline:single;}
+p
+{mso-style-unhide:no;
+mso-margin-top-alt:auto;
+margin-right:0in;
+mso-margin-bottom-alt:auto;
+margin-left:0in;
+mso-pagination:widow-orphan;
+font-size:12.0pt;
+font-family:"Times New Roman","serif";
+mso-fareast-font-family:"Times New Roman";}
+p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
+{mso-style-unhide:no;
+mso-style-link:"Balloon Text Char";
+margin:0in;
+margin-bottom:.0001pt;
+mso-pagination:widow-orphan;
+font-size:8.0pt;
+font-family:"Tahoma","sans-serif";
+mso-fareast-font-family:"Times New Roman";}
+span.Heading1Char
+{mso-style-name:"Heading 1 Char";
+mso-style-unhide:no;
+mso-style-locked:yes;
+mso-style-link:"Heading 1";
+mso-ansi-font-size:14.0pt;
+mso-bidi-font-size:14.0pt;
+font-family:"Cambria","serif";
+mso-ascii-font-family:Cambria;
+mso-ascii-theme-font:major-latin;
+mso-fareast-font-family:"Times New Roman";
+mso-fareast-theme-font:major-fareast;
+mso-hansi-font-family:Cambria;
+mso-hansi-theme-font:major-latin;
+mso-bidi-font-family:"Times New Roman";
+mso-bidi-theme-font:major-bidi;
+color:#365F91;
+mso-themecolor:accent1;
+mso-themeshade:191;
+font-weight:bold;}
+span.Heading2Char
+{mso-style-name:"Heading 2 Char";
+mso-style-unhide:no;
+mso-style-locked:yes;
+mso-style-link:"Heading 2";
+mso-ansi-font-size:13.0pt;
+mso-bidi-font-size:13.0pt;
+font-family:"Cambria","serif";
+mso-ascii-font-family:Cambria;
+mso-ascii-theme-font:major-latin;
+mso-fareast-font-family:"Times New Roman";
+mso-fareast-theme-font:major-fareast;
+mso-hansi-font-family:Cambria;
+mso-hansi-theme-font:major-latin;
+mso-bidi-font-family:"Times New Roman";
+mso-bidi-theme-font:major-bidi;
+color:#4F81BD;
+mso-themecolor:accent1;
+font-weight:bold;}
+span.Heading3Char
+{mso-style-name:"Heading 3 Char";
+mso-style-unhide:no;
+mso-style-locked:yes;
+mso-style-link:"Heading 3";
+mso-ansi-font-size:12.0pt;
+mso-bidi-font-size:12.0pt;
+font-family:"Cambria","serif";
+mso-ascii-font-family:Cambria;
+mso-ascii-theme-font:major-latin;
+mso-fareast-font-family:"Times New Roman";
+mso-fareast-theme-font:major-fareast;
+mso-hansi-font-family:Cambria;
+mso-hansi-theme-font:major-latin;
+mso-bidi-font-family:"Times New Roman";
+mso-bidi-theme-font:major-bidi;
+color:#4F81BD;
+mso-themecolor:accent1;
+font-weight:bold;}
+span.BalloonTextChar
+{mso-style-name:"Balloon Text Char";
+mso-style-unhide:no;
+mso-style-locked:yes;
+mso-style-link:"Balloon Text";
+mso-ansi-font-size:8.0pt;
+mso-bidi-font-size:8.0pt;
+font-family:"Tahoma","sans-serif";
+mso-ascii-font-family:Tahoma;
+mso-hansi-font-family:Tahoma;
+mso-bidi-font-family:Tahoma;}
+.MsoChpDefault
+{mso-style-type:export-only;
+mso-default-props:yes;
+font-size:10.0pt;
+mso-ansi-font-size:10.0pt;
+mso-bidi-font-size:10.0pt;}
+@page WordSection1
+{size:8.5in 11.0in;
+margin:1.0in 1.25in 1.0in 1.25in;
+mso-header-margin:.5in;
+mso-footer-margin:.5in;
+mso-paper-source:0;}
+div.WordSection1
+{page:WordSection1;}
+/* List Definitions */
+@list l0
+{mso-list-id:62067358;
+mso-list-template-ids:-174943062;}
+@list l0:level1
+{mso-level-number-format:bullet;
+mso-level-text:\F0B7;
+mso-level-tab-stop:.5in;
+mso-level-number-position:left;
+text-indent:-.25in;
+mso-ansi-font-size:10.0pt;
+font-family:Symbol;}
+@list l0:level2
+{mso-level-tab-stop:1.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l0:level3
+{mso-level-tab-stop:1.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l0:level4
+{mso-level-tab-stop:2.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l0:level5
+{mso-level-tab-stop:2.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l0:level6
+{mso-level-tab-stop:3.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l0:level7
+{mso-level-tab-stop:3.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l0:level8
+{mso-level-tab-stop:4.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l0:level9
+{mso-level-tab-stop:4.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l1
+{mso-list-id:128015942;
+mso-list-template-ids:-90681214;}
+@list l1:level1
+{mso-level-tab-stop:.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l1:level2
+{mso-level-tab-stop:1.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l1:level3
+{mso-level-tab-stop:1.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l1:level4
+{mso-level-tab-stop:2.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l1:level5
+{mso-level-tab-stop:2.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l1:level6
+{mso-level-tab-stop:3.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l1:level7
+{mso-level-tab-stop:3.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l1:level8
+{mso-level-tab-stop:4.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l1:level9
+{mso-level-tab-stop:4.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l2
+{mso-list-id:216556000;
+mso-list-template-ids:925924412;}
+@list l2:level1
+{mso-level-number-format:bullet;
+mso-level-text:\F0B7;
+mso-level-tab-stop:.5in;
+mso-level-number-position:left;
+text-indent:-.25in;
+mso-ansi-font-size:10.0pt;
+font-family:Symbol;}
+@list l2:level2
+{mso-level-number-format:bullet;
+mso-level-text:\F0B7;
+mso-level-tab-stop:1.0in;
+mso-level-number-position:left;
+text-indent:-.25in;
+mso-ansi-font-size:10.0pt;
+font-family:Symbol;}
+@list l2:level3
+{mso-level-tab-stop:1.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l2:level4
+{mso-level-tab-stop:2.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l2:level5
+{mso-level-tab-stop:2.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l2:level6
+{mso-level-tab-stop:3.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l2:level7
+{mso-level-tab-stop:3.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l2:level8
+{mso-level-tab-stop:4.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l2:level9
+{mso-level-tab-stop:4.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l3
+{mso-list-id:562446694;
+mso-list-template-ids:913898366;}
+@list l3:level1
+{mso-level-number-format:bullet;
+mso-level-text:\F0B7;
+mso-level-tab-stop:.5in;
+mso-level-number-position:left;
+text-indent:-.25in;
+mso-ansi-font-size:10.0pt;
+font-family:Symbol;}
+@list l3:level2
+{mso-level-tab-stop:1.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l3:level3
+{mso-level-tab-stop:1.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l3:level4
+{mso-level-tab-stop:2.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l3:level5
+{mso-level-tab-stop:2.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l3:level6
+{mso-level-tab-stop:3.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l3:level7
+{mso-level-tab-stop:3.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l3:level8
+{mso-level-tab-stop:4.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l3:level9
+{mso-level-tab-stop:4.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l4
+{mso-list-id:797802132;
+mso-list-template-ids:-1971191336;}
+@list l4:level1
+{mso-level-tab-stop:.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l4:level2
+{mso-level-tab-stop:1.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l4:level3
+{mso-level-tab-stop:1.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l4:level4
+{mso-level-tab-stop:2.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l4:level5
+{mso-level-tab-stop:2.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l4:level6
+{mso-level-tab-stop:3.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l4:level7
+{mso-level-tab-stop:3.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l4:level8
+{mso-level-tab-stop:4.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l4:level9
+{mso-level-tab-stop:4.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l5
+{mso-list-id:907304066;
+mso-list-template-ids:1969781532;}
+@list l5:level1
+{mso-level-tab-stop:.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l5:level2
+{mso-level-tab-stop:1.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l5:level3
+{mso-level-tab-stop:1.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l5:level4
+{mso-level-tab-stop:2.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l5:level5
+{mso-level-tab-stop:2.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l5:level6
+{mso-level-tab-stop:3.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l5:level7
+{mso-level-tab-stop:3.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l5:level8
+{mso-level-tab-stop:4.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l5:level9
+{mso-level-tab-stop:4.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l6
+{mso-list-id:1050613616;
+mso-list-template-ids:-1009886748;}
+@list l6:level1
+{mso-level-number-format:bullet;
+mso-level-text:\F0B7;
+mso-level-tab-stop:.5in;
+mso-level-number-position:left;
+text-indent:-.25in;
+mso-ansi-font-size:10.0pt;
+font-family:Symbol;}
+@list l6:level2
+{mso-level-number-format:bullet;
+mso-level-text:\F0B7;
+mso-level-tab-stop:1.0in;
+mso-level-number-position:left;
+text-indent:-.25in;
+mso-ansi-font-size:10.0pt;
+font-family:Symbol;}
+@list l6:level3
+{mso-level-tab-stop:1.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l6:level4
+{mso-level-tab-stop:2.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l6:level5
+{mso-level-tab-stop:2.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l6:level6
+{mso-level-tab-stop:3.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l6:level7
+{mso-level-tab-stop:3.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l6:level8
+{mso-level-tab-stop:4.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l6:level9
+{mso-level-tab-stop:4.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l7
+{mso-list-id:1234970193;
+mso-list-template-ids:2055904002;}
+@list l7:level1
+{mso-level-number-format:bullet;
+mso-level-text:\F0B7;
+mso-level-tab-stop:.5in;
+mso-level-number-position:left;
+text-indent:-.25in;
+mso-ansi-font-size:10.0pt;
+font-family:Symbol;}
+@list l7:level2
+{mso-level-number-format:bullet;
+mso-level-text:\F0B7;
+mso-level-tab-stop:1.0in;
+mso-level-number-position:left;
+text-indent:-.25in;
+mso-ansi-font-size:10.0pt;
+font-family:Symbol;}
+@list l7:level3
+{mso-level-tab-stop:1.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l7:level4
+{mso-level-tab-stop:2.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l7:level5
+{mso-level-tab-stop:2.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l7:level6
+{mso-level-tab-stop:3.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l7:level7
+{mso-level-tab-stop:3.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l7:level8
+{mso-level-tab-stop:4.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l7:level9
+{mso-level-tab-stop:4.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l8
+{mso-list-id:1846092290;
+mso-list-template-ids:-768590846;}
+@list l8:level1
+{mso-level-start-at:2;
+mso-level-tab-stop:.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l8:level2
+{mso-level-tab-stop:1.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l8:level3
+{mso-level-tab-stop:1.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l8:level4
+{mso-level-tab-stop:2.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l8:level5
+{mso-level-tab-stop:2.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l8:level6
+{mso-level-tab-stop:3.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l8:level7
+{mso-level-tab-stop:3.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l8:level8
+{mso-level-tab-stop:4.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l8:level9
+{mso-level-tab-stop:4.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l9
+{mso-list-id:1894656566;
+mso-list-template-ids:1199983812;}
+@list l9:level1
+{mso-level-start-at:2;
+mso-level-tab-stop:.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l9:level2
+{mso-level-tab-stop:1.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l9:level3
+{mso-level-tab-stop:1.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l9:level4
+{mso-level-tab-stop:2.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l9:level5
+{mso-level-tab-stop:2.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l9:level6
+{mso-level-tab-stop:3.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l9:level7
+{mso-level-tab-stop:3.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l9:level8
+{mso-level-tab-stop:4.0in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+@list l9:level9
+{mso-level-tab-stop:4.5in;
+mso-level-number-position:left;
+text-indent:-.25in;}
+ol
+{margin-bottom:0in;}
+ul
+{margin-bottom:0in;}
+-->
+</style><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} </style> <![endif]--><!--[if gte mso 9]><xml> <o:shapedefaults v:ext="edit" spidmax="7170"/> </xml><![endif]--><!--[if gte mso 9]><xml> <o:shapelayout v:ext="edit"> <o:idmap v:ext="edit" data="1"/> </o:shapelayout></xml><![endif]-->
+<meta content="MCD Application Team" name="author"></head>
+<body link="blue" vlink="blue">
+<div class="WordSection1">
+<p class="MsoNormal"><span style="font-family: &quot;Arial&quot;,&quot;sans-serif&quot;;"><o:p>&nbsp;</o:p></span></p>
+<div align="center">
+<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
+<tbody>
+<tr style="">
+<td style="padding: 0in;" valign="top">
+<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" cellspacing="0" width="900">
+<tbody>
+<tr style="">
+<td style="padding: 0in 5.4pt;" valign="top">
+<p class="MsoNormal"><span style="font-size: 8pt; font-family: &quot;Arial&quot;,&quot;sans-serif&quot;; color: blue;"><a href="../../Release_Notes.html">Back to Release page</a></span><span style="font-size: 10pt;"><o:p></o:p></span></p>
+</td>
+</tr>
+<tr style="">
+<td style="padding: 1.5pt;">
+<h1 style="margin-bottom: 0.25in; text-align: center;" align="center"><span style="font-size: 20pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: rgb(51, 102, 255);">Release
+Notes for STM32F7xx HAL Drivers</span><span style="font-size: 20pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"><o:p></o:p></span></h1>
+<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: &quot;Arial&quot;,&quot;sans-serif&quot;; color: black;">Copyright
+2015 STMicroelectronics</span><span style="color: black;"><u1:p></u1:p><o:p></o:p></span></p>
+<p class="MsoNormal" style="text-align: center;" align="center"><span style="font-size: 10pt; font-family: &quot;Arial&quot;,&quot;sans-serif&quot;; color: black;"><img style="border: 0px solid ; width: 171px; height: 126px;" alt="" id="_x0000_i1026" src="../../_htmresc/st_logo.png"></span><span style="font-size: 10pt;"><o:p></o:p></span></p>
+</td>
+</tr>
+</tbody>
+</table>
+<p class="MsoNormal"><span style="font-family: &quot;Arial&quot;,&quot;sans-serif&quot;; display: none;"><o:p>&nbsp;</o:p></span></p>
+<table class="MsoNormalTable" style="width: 675pt;" border="0" cellpadding="0" width="900">
+<tbody>
+<tr style="">
+<td style="padding: 0in;" valign="top">
+<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="History"></a><span style="font-size: 12pt; color: white;">Update History</span></h2>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.0.4 / 09-December-2015</span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes</span></u></b></p><ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL Generic </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">update</span></li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update HAL 
+weak empty callbacks to prevent unused argument compilation warnings with some 
+compilers by calling the following line:</span>
+</li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">UNUSED(hppp);</span></li></ul></ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL ETH</span> update&nbsp;</span></li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update HAL_ETH_Init() function to add timeout on the Software reset management<br></span></li></ul></ul><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.0.3 / 13-November-2015</span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes</span></u></b></p><ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana,sans-serif; font-size: 10pt;">General updates 
+to fix known defects and enhancements implementation</span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;"></span></span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana,sans-serif; font-size: 10pt;"><span style="font-weight: bold;">One change done on the HAL CRYP requires an update on 
+the application code based on HAL V1.0.2</span></span>
+</li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update 
+HAL_CRYP_DESECB_Decrypt() API to invert pPlainData and pCypherData 
+parameters</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL Generic </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">update</span></li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update HAL 
+weak empty callbacks to prevent unused argument compilation warnings with some 
+compilers by calling the following line:</span>
+</li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">UNUSED(hppp);</span></li></ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Remove references to STM32CubeMX and MicroXplorer from stm32f7xx_hal_msp_template.c file<br></span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL ADC</span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;"> update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">Replace ADC_CHANNEL_TEMPSENSOR definition from ADC_CHANNEL_16 to ADC_CHANNEL_18 </span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">&nbsp;</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">Update HAL ADC driver state machine for code efficiency</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;" lang="EN-US">Add new literal: ADC_INJECTED_SOFTWARE_START to be used as possible 
+value for the ExternalTrigInjecConvEdge parameter in the ADC_InitTypeDef 
+structure to select the ADC software trigger mode.</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL CORTEX </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update</span>
+</li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Remove duplication 
+for __HAL_CORTEX_SYSTICKCLK_CONFIG() macro</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL CRYP </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update HAL_CRYP_DESECB_Decrypt() API to fix the inverted pPlainData and pCypherData parameters issue </span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL FLASH </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update OB_IWDG_STOP_ACTIVE definition</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update OB_RDP_LEVEL_x definition by proper values</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update FLASH_MassErase() function to consider the voltage range parameter in the mass erase configuration <br></span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL RCC</span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;"> update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update values for LSE Drive capability defines</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update PLLN min value 50 instead of 100</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">add RCC_PLLI2SP_DIVx defines for PLLI2SP clock divider</span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"></span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;" lang="EN-US">Update __HAL_RCC_USB_OTG_FS_CLK_DISABLE() macro to remove the disable of the SYSCFG</span><span style="font-family: Verdana; font-size: 10pt;">&nbsp;</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">Update HAL_RCCEx_GetPeriphCLKFreq() function for proper SAI clock configuration<br></span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL SAI </span></span><span style="font-weight: bold;"></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update for proper management of the external synchronization input selection</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update of&nbsp;HAL_SAI_Init () funciton</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update definition of SAI_Block_SyncExt and SAI_Block_Synchronization groups</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update SAI_SLOTACTIVE_X &nbsp;defines values</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update&nbsp;</span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">HAL_SAI_Init() function for proper companding mode management</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update SAI_Transmit_ITxxBit() functions to add the check on transfer counter before writing new data to SAIx_DR registers</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update SAI_FillFifo() function to avoid issue when the number of data to transmit is smaller than the FIFO size</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update HAL_SAI_EnableRxMuteMode() function for proper mute management</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update SAI_InitPCM() function to support 24bits configuration</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL SD </span></span><span style="font-weight: bold;"></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">update HAL_SD_Get_CardInfo() to properly support high capacity cards</span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;"><br></span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL SPDIFRX </span></span><span style="font-weight: bold;"></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">update</span></li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update SPDIFRX_DMARxCplt() function implementation to&nbsp;check on circular mode before disabling the DMA</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL TIM </span></span><span style="font-weight: bold;"></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">update</span></li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update HAL_TIM_ConfigClockSource() function implementation for proper parameters check</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;"><span style="font-weight: bold;">HAL UART</span> update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">Update __HAL_UART_CLEAR_IT macro for proper functionning&nbsp;</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;"><span style="font-weight: bold;">ll FMC</span> update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">add FMC_PAGE_SIZE_512 define</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;"><span style="font-weight: bold;">ll SDMMC</span> update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update SDMMC_SetSDMMCReadWaitMode() function for proper functionning</span></li></ul></ul><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.0.2 / 21-September-2015</span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes</span></u></b></p><ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL Generic </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">update</span></li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">stm32f7xx_hal.conf_template.h: update&nbsp;</span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">HSE_STARTUP_TIMEOUT</span></li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">stm32f7xx_hal_def.h: update the</span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"> quotation marks used in #error"USE_RTOS should be 0 in the current HAL release"</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL DMA</span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;"> update</span></li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Overall 
+driver update for code optimization</span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"></span></li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">add 
+StreamBaseAddress and StreamIndex new fields in the DMA_HandleTypeDef 
+structure</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">add 
+DMA_Base_Registers private structure</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">add static function 
+DMA_CalcBaseAndBitshift()</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update 
+HAL_DMA_Init() function to use the new added static function</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update 
+HAL_DMA_DeInit() function to optimize clear flag operations</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update 
+HAL_DMA_Start_IT() function to optimize interrupts enable</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update 
+HAL_DMA_PollForTransfer() function to optimize check on flags</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update 
+HAL_DMA_IRQHandler() function to optimize interrupt flag management</span></li></ul></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL ETH&nbsp;</span></span><span style="font-weight: bold;"></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">remove duplicated macro IS_ETH_RX_MODE()</span><small><span style="font-style: italic;"></span></small></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL GPIO </span></span><span style="font-weight: bold;"></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">update</span></li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Rename 
+GPIO_SPEED_LOW define to GPIO_SPEED_FREQ_LOW</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Rename 
+GPIO_SPEED_MEDIUM define to GPIO_SPEED_FREQ_MEDIUM</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Rename 
+GPIO_SPEED_FAST define to GPIO_SPEED_FREQ_HIGH</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Rename 
+GPIO_SPEED_HIGH define to GPIO_SPEED_FREQ_VERY_HIGH</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL HASH </span></span><span style="font-weight: bold;"></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">update</span></li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Rename 
+HAL_HASH_STATETypeDef to HAL_HASH_StateTypeDef</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Rename 
+HAL_HASH_PhaseTypeDef to HAL_HASHPhaseTypeDef</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL RCC </span></span><span style="font-weight: bold;"></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt; font-weight: normal;">update</span><span style="font-weight: bold;"></span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update values for LSE Drive capability defines</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update PLLN/PLLI2SN/PLLSAI VCO min value 100MHz instead of 192MHz</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">add __HAL_RCC_MCO1_CONFIG() and </span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">__HAL_RCC_MCO2_CONFIG() macros</span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"></span></li></ul><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update HAL_RCCEx_PeriphCLKConfig() function to reset the Backup domain only if the RTC Clock source selection is modified&nbsp;</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;"><span style="font-weight: bold;">HAL TIM</span> update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update the implementation of __HAL_TIM_SET_COMPARE() macro</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">remove useless assert() in&nbsp;HAL_TIM_PWM_ConfigChannel(), TIM_OC2_SetConfig() and HAL_TIM_PWM_ConfigChannel() </span><span style="font-family: Verdana; font-size: 10pt;">functions</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;"><span style="font-weight: bold;">HAL CAN</span> update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">add the clear flag ERRI bit in HAL_CAN_IRQHandler()</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;"><span style="font-weight: bold;">HAL I2S</span> update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update I2S HAL_I2S_Transmit() API&nbsp;to keep the check on busy flag only for the slave</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;"><span style="font-weight: bold;">HAL QSPI</span> update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">Add __HAL_QSPI_CLEAR_FLAG() before QSPI_Config()</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;"><span style="font-weight: bold;">HAL UART</span> update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">Remove
+enabling of ERR IT source and PE source from HAL_UART_Transmit_IT() and
+remove the corresponding disabling ERR/PE IT from UART_EndTransmit_IT()</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;"><span style="font-weight: bold;">HAL PCD</span></span><span style="font-family: Verdana; font-size: 10pt;"> update</span><span style="font-weight: bold;">&nbsp;</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">Clean status phase received interrupt when DMA mode enabled&nbsp;</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;"><span style="font-weight: bold;">HAL HCD </span></span><span style="font-family: Verdana; font-size: 10pt;">update</span><span style="font-family: Verdana; font-size: 10pt;"><span style="font-weight: bold;"></span></span><span style="font-weight: bold;"></span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update to use local 
+variable in USB Host channel re-activation</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;"><span style="font-weight: bold;">ll FMC</span> update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update the define FMC Write FIFO Disable/Enable: FMC_WRITE_FIFO_DISABLE and FMC_WRITE_FIFO_ENABLE</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">remove return HAL_ERROR from FMC_SDRAM_SendCommand() function</span></li></ul></ul><span style="font-family: Verdana; font-size: 10pt;"></span><h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.0.1 / 25-June-2015</span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes</span></u></b></p><ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana,sans-serif; font-size: 10pt;">General updates 
+to fix known defects and enhancements implementation</span><span style="font-family: Verdana; font-size: 10pt;"></span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL CRC&nbsp;</span>update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update __HAL_CRC_SET_IDR() macro implementation to use WRITE_REG() instead of MODIFY_REG()<br></span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL CEC&nbsp;</span>update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update timeout management in HAL_CEC_Transmit() and HAL_CEC_Receive() functions</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL Cortex </span>update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update HAL_MPU_ConfigRegion() function to be misra compliant</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL ETH </span>update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Remove 
+duplicated IS_ETH_DUPLEX_MODE() and IS_ETH_RX_MODE() macros</span><span style="font-family: Verdana; font-size: 10pt;"></span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Remove 
+illegal space ETH_MAC_READCONTROLLER_FLUSHING macro</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update 
+ETH_MAC_READCONTROLLER_XXX defined values (XXX can be IDLE, READING_DATA and 
+READING_STATUS)</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL FLASH </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update FLASH_OB_GetRDP() function to return uint8_t &nbsp;instead of FlagStatus</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update OB_RDP_LEVELx definition</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">add __HAL_FLASH_GET_LATENCY() macro</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL HASH </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update</span><span style="font-family: Verdana; font-size: 10pt;"></span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update
+HASH_DMAXferCplt() and HASHEx_DMAXferCplt() functions to properly
+configure the number of valid bits in last word of the message</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update HAL_HASH_SHA1_Accumulate() function to check on the length of the input buffer</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update
+HAL_HASH_<span style="font-weight: bold; font-style: italic;">MODE</span>_Start_IT() functions (<span style="font-style: italic;"><span style="font-weight: bold;">Mode </span></span><span style="font-weight: bold;"></span>stands for MD5, SHA1, SHA224 and SHA256<span style="font-style: italic;"><span style="font-weight: bold;"> </span></span>) to :</span></li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Fix processing 
+fail for small input buffers</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">to unlock 
+the process and call return HAL_OK at the end of HASH processing to avoid 
+incorrect repeating software</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">properly to manage 
+the HashITCounter efficiency </span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update to call the 
+HAL_HASH_InCpltCallback() at the end of the complete buffer instead 
+of</span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"> 
+every each 512 bits </span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update HASH_IT_DINI and HASH_IT_DCI definition</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update __HAL_HASH_GET_FLAG() macro definition<br></span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL I2S </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update HAL_I2S_Transmit() function to ensure the waiting on Busy flag in case of slave mode selection</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL RTC </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update HAL_RTCEx_SetWakeUpTimer() and HAL_RTCEx_SetWakeUpTimer_IT() functions to properly check on WUTWF flag</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">rename RTC_TIMESTAMPPIN_PI8 define to RTC_TIMESTAMPPIN_POS1</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">rename RTC_TIMESTAMPPIN_PC1 define to RTC_TIMESTAMPPIN_POS2</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG() macro definition</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update __HAL_RTC_TAMPER_GET_IT() macro definition</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update __HAL_RTC_TAMPER_CLEAR_FLAG() macro definition</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update __HAL_RTC_TIMESTAMP_CLEAR_FLAG() macro definition</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() macro definition</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">add RTC_TAMPCR_TAMPXE and RTC_TAMPCR_TAMPXIE defines</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL SMARTCARD </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">add SMARTCARD_FLAG_IDLE, SMARTCARD_IT_IDLE and&nbsp; SMARTCARD_CLEAR_IDLEF defines<br></span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL UART </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update HAL_UART_DMAResume() function to clear overrun flag before resuming the Rx transfer</span></li><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update UART_FLAG_SBKF definition<br></span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">HAL USART </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update HAL_USART_DMAResume() function to </span><span style="font-family: Verdana; font-size: 10pt;">clear overrun flag before resuming the Rx transfer</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">LL FMC </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update</span></li><ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">update NAND timing maximum values</span></li></ul><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;"><span style="font-weight: bold;">LL USB </span></span><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">update</span>
+</li><ul><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">USB_FlushTxFifo API: 
+update to flush all Tx FIFO</span>
+</li><li style="margin-top: 4.5pt; margin-bottom: 4.5pt; color: black;" class="MsoNormal"><span style="font-family: 'Verdana','sans-serif'; font-size: 10pt;">Update to use local 
+variable in USB Host channel re-activation</span></li></ul></ul>
+<b><u><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;"></span></u></b>
+<h3 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial; margin-right: 500pt; width: 180px;"><span style="font-size: 10pt; font-family: Arial; color: white;">V1.0.0 / 12-May-2015</span></h3>
+<p class="MsoNormal" style="margin: 4.5pt 0cm 4.5pt 18pt;"><b style=""><u><span style="font-size: 10pt; font-family: Verdana; color: black;">Main
+Changes</span></u></b></p><ul style="margin-top: 0cm;" type="square"><li class="MsoNormal" style="color: black; margin-top: 4.5pt; margin-bottom: 4.5pt;"><span style="font-family: Verdana; font-size: 10pt;">First official release for</span><span style="font-family: Verdana; font-size: 10pt;"><span style="font-style: italic; font-weight: bold;"> STM32F756xx/746xx/745xx</span> 
+devices</span><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"></span></li></ul>
+<b><u><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;"></span></u></b>
+<h2 style="background: rgb(51, 102, 255) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><a name="License"></a><span style="font-size: 12pt; color: white;">License<o:p></o:p></span></h2>
+<div style="text-align: justify;">
+<div style="text-align: justify;"><font size="-1"><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">Redistribution
+and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are
+met:</span><br>
+</font>
+<ol>
+<li><font size="-1"><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">Redistributions
+of source code must retain the above copyright notice, this list of
+conditions and the following disclaimer.</span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"></span></font></li>
+<li><font size="-1"><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">Redistributions
+in binary form must reproduce the above copyright notice, this list of
+conditions and the following disclaimer in </span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">the
+documentation and/or other materials provided with the distribution.</span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"></span></font></li>
+<li><font size="-1"><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">Neither the
+name of STMicroelectronics nor the names of its contributors may be
+used to endorse or promote products derived </span><br>
+</font> </li>
+</ol>
+<font size="-1"><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
+from this software without specific prior written permission.</span><br>
+<span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"></span><br>
+<span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">THIS
+SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED</span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"> WARRANTIES,
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A </span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">PARTICULAR
+PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+CONTRIBUTORS BE LIABLE FOR ANY </span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">DIRECT,
+INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, </span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+BUSINESS INTERRUPTION) HOWEVER</span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"> CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR </span><span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+THE POSSIBILITY OF SUCH DAMAGE.</span></font> </div>
+<span style="font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;"></span></div>
+<span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;"></span>
+<div class="MsoNormal" style="text-align: center;" align="center"><span style="color: black;">
+<hr align="center" size="2" width="100%"></span></div>
+<p class="MsoNormal" style="margin: 4.5pt 0in 4.5pt 0.25in; text-align: center;" align="center"><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;; color: black;">For
+complete documentation on </span><span style="font-size: 10pt; font-family: &quot;Verdana&quot;,&quot;sans-serif&quot;;">STM32<span style="color: black;"> Microcontrollers visit </span><u><span style="color: blue;"><a href="http://www.st.com/internet/mcu/family/141.jsp" target="_blank">www.st.com/STM32</a></span></u></span><span style="color: black;"><o:p></o:p></span></p>
+</td>
+</tr>
+<tr><td style="padding: 0in;" valign="top"></td></tr></tbody>
+</table>
+<p class="MsoNormal"><span style="font-size: 10pt;"><o:p></o:p></span></p>
+</td>
+</tr>
+</tbody>
+</table>
+</div>
+<p class="MsoNormal"><o:p>&nbsp;</o:p></p>
+</div>
+</body></html>
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/TOOLCHAIN_ARM_MICRO/startup_stm32f746ng.S	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,463 @@
+;******************** (C) COPYRIGHT 2015 STMicroelectronics ********************
+;* File Name          : startup_stm32f746xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.0.2
+;* Date               : 21-September-2015
+;* Description        : STM32F746xx devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM7 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+                EXPORT  __initial_sp
+                
+Stack_Mem       SPACE   Stack_Size
+__initial_sp    EQU     0x20050000 ; Top of RAM
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000400
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+                EXPORT  __heap_base
+                EXPORT  __heap_limit
+                
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit    EQU (__initial_sp - Stack_Size)
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                   ; Window WatchDog                                        
+                DCD     PVD_IRQHandler                    ; PVD through EXTI Line detection                        
+                DCD     TAMP_STAMP_IRQHandler             ; Tamper and TimeStamps through the EXTI line            
+                DCD     RTC_WKUP_IRQHandler               ; RTC Wakeup through the EXTI line                       
+                DCD     FLASH_IRQHandler                  ; FLASH                                           
+                DCD     RCC_IRQHandler                    ; RCC                                             
+                DCD     EXTI0_IRQHandler                  ; EXTI Line0                                             
+                DCD     EXTI1_IRQHandler                  ; EXTI Line1                                             
+                DCD     EXTI2_IRQHandler                  ; EXTI Line2                                             
+                DCD     EXTI3_IRQHandler                  ; EXTI Line3                                             
+                DCD     EXTI4_IRQHandler                  ; EXTI Line4                                             
+                DCD     DMA1_Stream0_IRQHandler           ; DMA1 Stream 0                                   
+                DCD     DMA1_Stream1_IRQHandler           ; DMA1 Stream 1                                   
+                DCD     DMA1_Stream2_IRQHandler           ; DMA1 Stream 2                                   
+                DCD     DMA1_Stream3_IRQHandler           ; DMA1 Stream 3                                   
+                DCD     DMA1_Stream4_IRQHandler           ; DMA1 Stream 4                                   
+                DCD     DMA1_Stream5_IRQHandler           ; DMA1 Stream 5                                   
+                DCD     DMA1_Stream6_IRQHandler           ; DMA1 Stream 6                                   
+                DCD     ADC_IRQHandler                    ; ADC1, ADC2 and ADC3s                            
+                DCD     CAN1_TX_IRQHandler                ; CAN1 TX                                                
+                DCD     CAN1_RX0_IRQHandler               ; CAN1 RX0                                               
+                DCD     CAN1_RX1_IRQHandler               ; CAN1 RX1                                               
+                DCD     CAN1_SCE_IRQHandler               ; CAN1 SCE                                               
+                DCD     EXTI9_5_IRQHandler                ; External Line[9:5]s                                    
+                DCD     TIM1_BRK_TIM9_IRQHandler          ; TIM1 Break and TIM9                   
+                DCD     TIM1_UP_TIM10_IRQHandler          ; TIM1 Update and TIM10                 
+                DCD     TIM1_TRG_COM_TIM11_IRQHandler     ; TIM1 Trigger and Commutation and TIM11
+                DCD     TIM1_CC_IRQHandler                ; TIM1 Capture Compare                                   
+                DCD     TIM2_IRQHandler                   ; TIM2                                            
+                DCD     TIM3_IRQHandler                   ; TIM3                                            
+                DCD     TIM4_IRQHandler                   ; TIM4                                            
+                DCD     I2C1_EV_IRQHandler                ; I2C1 Event                                             
+                DCD     I2C1_ER_IRQHandler                ; I2C1 Error                                             
+                DCD     I2C2_EV_IRQHandler                ; I2C2 Event                                             
+                DCD     I2C2_ER_IRQHandler                ; I2C2 Error                                               
+                DCD     SPI1_IRQHandler                   ; SPI1                                            
+                DCD     SPI2_IRQHandler                   ; SPI2                                            
+                DCD     USART1_IRQHandler                 ; USART1                                          
+                DCD     USART2_IRQHandler                 ; USART2                                          
+                DCD     USART3_IRQHandler                 ; USART3                                          
+                DCD     EXTI15_10_IRQHandler              ; External Line[15:10]s                                  
+                DCD     RTC_Alarm_IRQHandler              ; RTC Alarm (A and B) through EXTI Line                  
+                DCD     OTG_FS_WKUP_IRQHandler            ; USB OTG FS Wakeup through EXTI line                        
+                DCD     TIM8_BRK_TIM12_IRQHandler         ; TIM8 Break and TIM12                  
+                DCD     TIM8_UP_TIM13_IRQHandler          ; TIM8 Update and TIM13                 
+                DCD     TIM8_TRG_COM_TIM14_IRQHandler     ; TIM8 Trigger and Commutation and TIM14
+                DCD     TIM8_CC_IRQHandler                ; TIM8 Capture Compare                                   
+                DCD     DMA1_Stream7_IRQHandler           ; DMA1 Stream7                                           
+                DCD     FMC_IRQHandler                    ; FMC                                             
+                DCD     SDMMC1_IRQHandler                  ; SDMMC1                                            
+                DCD     TIM5_IRQHandler                   ; TIM5                                            
+                DCD     SPI3_IRQHandler                   ; SPI3                                            
+                DCD     UART4_IRQHandler                  ; UART4                                           
+                DCD     UART5_IRQHandler                  ; UART5                                           
+                DCD     TIM6_DAC_IRQHandler               ; TIM6 and DAC1&2 underrun errors                   
+                DCD     TIM7_IRQHandler                   ; TIM7                   
+                DCD     DMA2_Stream0_IRQHandler           ; DMA2 Stream 0                                   
+                DCD     DMA2_Stream1_IRQHandler           ; DMA2 Stream 1                                   
+                DCD     DMA2_Stream2_IRQHandler           ; DMA2 Stream 2                                   
+                DCD     DMA2_Stream3_IRQHandler           ; DMA2 Stream 3                                   
+                DCD     DMA2_Stream4_IRQHandler           ; DMA2 Stream 4                                   
+                DCD     ETH_IRQHandler                    ; Ethernet                                        
+                DCD     ETH_WKUP_IRQHandler               ; Ethernet Wakeup through EXTI line                      
+                DCD     CAN2_TX_IRQHandler                ; CAN2 TX                                                
+                DCD     CAN2_RX0_IRQHandler               ; CAN2 RX0                                               
+                DCD     CAN2_RX1_IRQHandler               ; CAN2 RX1                                               
+                DCD     CAN2_SCE_IRQHandler               ; CAN2 SCE                                               
+                DCD     OTG_FS_IRQHandler                 ; USB OTG FS                                      
+                DCD     DMA2_Stream5_IRQHandler           ; DMA2 Stream 5                                   
+                DCD     DMA2_Stream6_IRQHandler           ; DMA2 Stream 6                                   
+                DCD     DMA2_Stream7_IRQHandler           ; DMA2 Stream 7                                   
+                DCD     USART6_IRQHandler                 ; USART6                                           
+                DCD     I2C3_EV_IRQHandler                ; I2C3 event                                             
+                DCD     I2C3_ER_IRQHandler                ; I2C3 error                                             
+                DCD     OTG_HS_EP1_OUT_IRQHandler         ; USB OTG HS End Point 1 Out                      
+                DCD     OTG_HS_EP1_IN_IRQHandler          ; USB OTG HS End Point 1 In                       
+                DCD     OTG_HS_WKUP_IRQHandler            ; USB OTG HS Wakeup through EXTI                         
+                DCD     OTG_HS_IRQHandler                 ; USB OTG HS                                      
+                DCD     DCMI_IRQHandler                   ; DCMI                                            
+                DCD     0                                 ; Reserved                                     
+                DCD     RNG_IRQHandler                    ; Hash and Rng
+                DCD     FPU_IRQHandler                    ; FPU
+                DCD     UART7_IRQHandler                  ; UART7
+                DCD     UART8_IRQHandler                  ; UART8
+                DCD     SPI4_IRQHandler                   ; SPI4
+                DCD     SPI5_IRQHandler                   ; SPI5
+                DCD     SPI6_IRQHandler                   ; SPI6
+                DCD     SAI1_IRQHandler                   ; SAI1
+                DCD     LTDC_IRQHandler                   ; LTDC
+                DCD     LTDC_ER_IRQHandler                ; LTDC error
+                DCD     DMA2D_IRQHandler                  ; DMA2D
+                DCD     SAI2_IRQHandler                   ; SAI2
+                DCD     QUADSPI_IRQHandler                ; QUADSPI
+                DCD     LPTIM1_IRQHandler                 ; LPTIM1
+                DCD     CEC_IRQHandler                    ; HDMI_CEC
+                DCD     I2C4_EV_IRQHandler                ; I2C4 Event                                             
+                DCD     I2C4_ER_IRQHandler                ; I2C4 Error 
+                DCD     SPDIF_RX_IRQHandler               ; SPDIF_RX
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+        IMPORT  SystemInit
+        IMPORT  __main
+
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                   [WEAK]                                        
+                EXPORT  PVD_IRQHandler                    [WEAK]                      
+                EXPORT  TAMP_STAMP_IRQHandler             [WEAK]         
+                EXPORT  RTC_WKUP_IRQHandler               [WEAK]                     
+                EXPORT  FLASH_IRQHandler                  [WEAK]                                         
+                EXPORT  RCC_IRQHandler                    [WEAK]                                            
+                EXPORT  EXTI0_IRQHandler                  [WEAK]                                            
+                EXPORT  EXTI1_IRQHandler                  [WEAK]                                             
+                EXPORT  EXTI2_IRQHandler                  [WEAK]                                            
+                EXPORT  EXTI3_IRQHandler                  [WEAK]                                           
+                EXPORT  EXTI4_IRQHandler                  [WEAK]                                            
+                EXPORT  DMA1_Stream0_IRQHandler           [WEAK]                                
+                EXPORT  DMA1_Stream1_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream2_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream3_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream4_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream5_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream6_IRQHandler           [WEAK]                                   
+                EXPORT  ADC_IRQHandler                    [WEAK]                         
+                EXPORT  CAN1_TX_IRQHandler                [WEAK]                                                
+                EXPORT  CAN1_RX0_IRQHandler               [WEAK]                                               
+                EXPORT  CAN1_RX1_IRQHandler               [WEAK]                                                
+                EXPORT  CAN1_SCE_IRQHandler               [WEAK]                                                
+                EXPORT  EXTI9_5_IRQHandler                [WEAK]                                    
+                EXPORT  TIM1_BRK_TIM9_IRQHandler          [WEAK]                  
+                EXPORT  TIM1_UP_TIM10_IRQHandler          [WEAK]                
+                EXPORT  TIM1_TRG_COM_TIM11_IRQHandler     [WEAK] 
+                EXPORT  TIM1_CC_IRQHandler                [WEAK]                                   
+                EXPORT  TIM2_IRQHandler                   [WEAK]                                            
+                EXPORT  TIM3_IRQHandler                   [WEAK]                                            
+                EXPORT  TIM4_IRQHandler                   [WEAK]                                            
+                EXPORT  I2C1_EV_IRQHandler                [WEAK]                                             
+                EXPORT  I2C1_ER_IRQHandler                [WEAK]                                             
+                EXPORT  I2C2_EV_IRQHandler                [WEAK]                                            
+                EXPORT  I2C2_ER_IRQHandler                [WEAK]                                               
+                EXPORT  SPI1_IRQHandler                   [WEAK]                                           
+                EXPORT  SPI2_IRQHandler                   [WEAK]                                            
+                EXPORT  USART1_IRQHandler                 [WEAK]                                          
+                EXPORT  USART2_IRQHandler                 [WEAK]                                          
+                EXPORT  USART3_IRQHandler                 [WEAK]                                         
+                EXPORT  EXTI15_10_IRQHandler              [WEAK]                                  
+                EXPORT  RTC_Alarm_IRQHandler              [WEAK]                  
+                EXPORT  OTG_FS_WKUP_IRQHandler            [WEAK]                        
+                EXPORT  TIM8_BRK_TIM12_IRQHandler         [WEAK]                 
+                EXPORT  TIM8_UP_TIM13_IRQHandler          [WEAK]                 
+                EXPORT  TIM8_TRG_COM_TIM14_IRQHandler     [WEAK] 
+                EXPORT  TIM8_CC_IRQHandler                [WEAK]                                   
+                EXPORT  DMA1_Stream7_IRQHandler           [WEAK]                                          
+                EXPORT  FMC_IRQHandler                    [WEAK]                                             
+                EXPORT  SDMMC1_IRQHandler                 [WEAK]                                             
+                EXPORT  TIM5_IRQHandler                   [WEAK]                                             
+                EXPORT  SPI3_IRQHandler                   [WEAK]                                             
+                EXPORT  UART4_IRQHandler                  [WEAK]                                            
+                EXPORT  UART5_IRQHandler                  [WEAK]                                            
+                EXPORT  TIM6_DAC_IRQHandler               [WEAK]                   
+                EXPORT  TIM7_IRQHandler                   [WEAK]                    
+                EXPORT  DMA2_Stream0_IRQHandler           [WEAK]                                  
+                EXPORT  DMA2_Stream1_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream2_IRQHandler           [WEAK]                                    
+                EXPORT  DMA2_Stream3_IRQHandler           [WEAK]                                    
+                EXPORT  DMA2_Stream4_IRQHandler           [WEAK]                                 
+                EXPORT  ETH_IRQHandler                    [WEAK]                                         
+                EXPORT  ETH_WKUP_IRQHandler               [WEAK]                     
+                EXPORT  CAN2_TX_IRQHandler                [WEAK]                                               
+                EXPORT  CAN2_RX0_IRQHandler               [WEAK]                                               
+                EXPORT  CAN2_RX1_IRQHandler               [WEAK]                                               
+                EXPORT  CAN2_SCE_IRQHandler               [WEAK]                                               
+                EXPORT  OTG_FS_IRQHandler                 [WEAK]                                       
+                EXPORT  DMA2_Stream5_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream6_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream7_IRQHandler           [WEAK]                                   
+                EXPORT  USART6_IRQHandler                 [WEAK]                                           
+                EXPORT  I2C3_EV_IRQHandler                [WEAK]                                              
+                EXPORT  I2C3_ER_IRQHandler                [WEAK]                                              
+                EXPORT  OTG_HS_EP1_OUT_IRQHandler         [WEAK]                      
+                EXPORT  OTG_HS_EP1_IN_IRQHandler          [WEAK]                      
+                EXPORT  OTG_HS_WKUP_IRQHandler            [WEAK]                        
+                EXPORT  OTG_HS_IRQHandler                 [WEAK]                                      
+                EXPORT  DCMI_IRQHandler                   [WEAK]                                             
+                EXPORT  RNG_IRQHandler                    [WEAK]
+                EXPORT  FPU_IRQHandler                    [WEAK]
+                EXPORT  UART7_IRQHandler                  [WEAK]
+                EXPORT  UART8_IRQHandler                  [WEAK]
+                EXPORT  SPI4_IRQHandler                   [WEAK]
+                EXPORT  SPI5_IRQHandler                   [WEAK]
+                EXPORT  SPI6_IRQHandler                   [WEAK]
+                EXPORT  SAI1_IRQHandler                   [WEAK]
+                EXPORT  LTDC_IRQHandler                   [WEAK]
+                EXPORT  LTDC_ER_IRQHandler                [WEAK]
+                EXPORT  DMA2D_IRQHandler                  [WEAK]
+                EXPORT  SAI2_IRQHandler                   [WEAK]   
+                EXPORT  QUADSPI_IRQHandler                [WEAK]
+                EXPORT  LPTIM1_IRQHandler                 [WEAK]
+                EXPORT  CEC_IRQHandler                    [WEAK]   
+                EXPORT  I2C4_EV_IRQHandler                [WEAK]
+                EXPORT  I2C4_ER_IRQHandler                [WEAK]
+                EXPORT  SPDIF_RX_IRQHandler               [WEAK]
+
+WWDG_IRQHandler                                                       
+PVD_IRQHandler                                      
+TAMP_STAMP_IRQHandler                  
+RTC_WKUP_IRQHandler                                
+FLASH_IRQHandler                                                       
+RCC_IRQHandler                                                            
+EXTI0_IRQHandler                                                          
+EXTI1_IRQHandler                                                           
+EXTI2_IRQHandler                                                          
+EXTI3_IRQHandler                                                         
+EXTI4_IRQHandler                                                          
+DMA1_Stream0_IRQHandler                                       
+DMA1_Stream1_IRQHandler                                          
+DMA1_Stream2_IRQHandler                                          
+DMA1_Stream3_IRQHandler                                          
+DMA1_Stream4_IRQHandler                                          
+DMA1_Stream5_IRQHandler                                          
+DMA1_Stream6_IRQHandler                                          
+ADC_IRQHandler                                         
+CAN1_TX_IRQHandler                                                            
+CAN1_RX0_IRQHandler                                                          
+CAN1_RX1_IRQHandler                                                           
+CAN1_SCE_IRQHandler                                                           
+EXTI9_5_IRQHandler                                                
+TIM1_BRK_TIM9_IRQHandler                        
+TIM1_UP_TIM10_IRQHandler                      
+TIM1_TRG_COM_TIM11_IRQHandler  
+TIM1_CC_IRQHandler                                               
+TIM2_IRQHandler                                                           
+TIM3_IRQHandler                                                           
+TIM4_IRQHandler                                                           
+I2C1_EV_IRQHandler                                                         
+I2C1_ER_IRQHandler                                                         
+I2C2_EV_IRQHandler                                                        
+I2C2_ER_IRQHandler                                                           
+SPI1_IRQHandler                                                          
+SPI2_IRQHandler                                                           
+USART1_IRQHandler                                                       
+USART2_IRQHandler                                                       
+USART3_IRQHandler                                                      
+EXTI15_10_IRQHandler                                            
+RTC_Alarm_IRQHandler                            
+OTG_FS_WKUP_IRQHandler                                
+TIM8_BRK_TIM12_IRQHandler                      
+TIM8_UP_TIM13_IRQHandler                       
+TIM8_TRG_COM_TIM14_IRQHandler  
+TIM8_CC_IRQHandler                                               
+DMA1_Stream7_IRQHandler                                                 
+FMC_IRQHandler                                                            
+SDMMC1_IRQHandler                                                            
+TIM5_IRQHandler                                                            
+SPI3_IRQHandler                                                            
+UART4_IRQHandler                                                          
+UART5_IRQHandler                                                          
+TIM6_DAC_IRQHandler                            
+TIM7_IRQHandler                              
+DMA2_Stream0_IRQHandler                                         
+DMA2_Stream1_IRQHandler                                          
+DMA2_Stream2_IRQHandler                                           
+DMA2_Stream3_IRQHandler                                           
+DMA2_Stream4_IRQHandler                                        
+ETH_IRQHandler                                                         
+ETH_WKUP_IRQHandler                                
+CAN2_TX_IRQHandler                                                           
+CAN2_RX0_IRQHandler                                                          
+CAN2_RX1_IRQHandler                                                          
+CAN2_SCE_IRQHandler                                                          
+OTG_FS_IRQHandler                                                    
+DMA2_Stream5_IRQHandler                                          
+DMA2_Stream6_IRQHandler                                          
+DMA2_Stream7_IRQHandler                                          
+USART6_IRQHandler                                                        
+I2C3_EV_IRQHandler                                                          
+I2C3_ER_IRQHandler                                                          
+OTG_HS_EP1_OUT_IRQHandler                           
+OTG_HS_EP1_IN_IRQHandler                            
+OTG_HS_WKUP_IRQHandler                                
+OTG_HS_IRQHandler                                                   
+DCMI_IRQHandler                                                            
+RNG_IRQHandler
+FPU_IRQHandler  
+UART7_IRQHandler                  
+UART8_IRQHandler                  
+SPI4_IRQHandler                   
+SPI5_IRQHandler                   
+SPI6_IRQHandler                   
+SAI1_IRQHandler                   
+LTDC_IRQHandler                   
+LTDC_ER_IRQHandler                 
+DMA2D_IRQHandler   
+SAI2_IRQHandler        
+QUADSPI_IRQHandler
+LPTIM1_IRQHandler
+CEC_IRQHandler
+I2C4_EV_IRQHandler
+I2C4_ER_IRQHandler
+SPDIF_RX_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+                END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/TOOLCHAIN_ARM_MICRO/stm32f746ng.sct	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2016, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+;     this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+;    this list of conditions and the following disclaimer in the documentation
+;    and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+;    may be used to endorse or promote products derived from this software
+;    without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F746NG: 1024 KB FLASH (0x100000) + 320 KB SRAM (0x50000)
+LR_IROM1 0x08000000 0x100000  {    ; load region size_region
+
+  ER_IROM1 0x08000000 0x100000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+
+  ; Total: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM
+  RW_IRAM1 (0x20000000+0x1C8) (0x50000-0x1C8)  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/TOOLCHAIN_ARM_MICRO/sys.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model, 
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif 
+
+#include <rt_misc.h>
+#include <stdint.h>
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+    uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+    uint32_t sp_limit = __current_sp();
+
+    zi_limit = (zi_limit + 7) & ~0x7;    // ensure zi_limit is 8-byte aligned
+
+    struct __initial_stackheap r;
+    r.heap_base = zi_limit;
+    r.heap_limit = sp_limit;
+    return r;
+}
+
+#ifdef __cplusplus
+}
+#endif 

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/TOOLCHAIN_ARM_STD/startup_stm32f746ng.S	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,436 @@
+;******************** (C) COPYRIGHT 2015 STMicroelectronics ********************
+;* File Name          : startup_stm32f746xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.0.2
+;* Date               : 21-September-2015
+;* Description        : STM32F746xx devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM7 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+__initial_sp    EQU     0x20050000 ; Top of RAM
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                   ; Window WatchDog                                        
+                DCD     PVD_IRQHandler                    ; PVD through EXTI Line detection                        
+                DCD     TAMP_STAMP_IRQHandler             ; Tamper and TimeStamps through the EXTI line            
+                DCD     RTC_WKUP_IRQHandler               ; RTC Wakeup through the EXTI line                       
+                DCD     FLASH_IRQHandler                  ; FLASH                                           
+                DCD     RCC_IRQHandler                    ; RCC                                             
+                DCD     EXTI0_IRQHandler                  ; EXTI Line0                                             
+                DCD     EXTI1_IRQHandler                  ; EXTI Line1                                             
+                DCD     EXTI2_IRQHandler                  ; EXTI Line2                                             
+                DCD     EXTI3_IRQHandler                  ; EXTI Line3                                             
+                DCD     EXTI4_IRQHandler                  ; EXTI Line4                                             
+                DCD     DMA1_Stream0_IRQHandler           ; DMA1 Stream 0                                   
+                DCD     DMA1_Stream1_IRQHandler           ; DMA1 Stream 1                                   
+                DCD     DMA1_Stream2_IRQHandler           ; DMA1 Stream 2                                   
+                DCD     DMA1_Stream3_IRQHandler           ; DMA1 Stream 3                                   
+                DCD     DMA1_Stream4_IRQHandler           ; DMA1 Stream 4                                   
+                DCD     DMA1_Stream5_IRQHandler           ; DMA1 Stream 5                                   
+                DCD     DMA1_Stream6_IRQHandler           ; DMA1 Stream 6                                   
+                DCD     ADC_IRQHandler                    ; ADC1, ADC2 and ADC3s                            
+                DCD     CAN1_TX_IRQHandler                ; CAN1 TX                                                
+                DCD     CAN1_RX0_IRQHandler               ; CAN1 RX0                                               
+                DCD     CAN1_RX1_IRQHandler               ; CAN1 RX1                                               
+                DCD     CAN1_SCE_IRQHandler               ; CAN1 SCE                                               
+                DCD     EXTI9_5_IRQHandler                ; External Line[9:5]s                                    
+                DCD     TIM1_BRK_TIM9_IRQHandler          ; TIM1 Break and TIM9                   
+                DCD     TIM1_UP_TIM10_IRQHandler          ; TIM1 Update and TIM10                 
+                DCD     TIM1_TRG_COM_TIM11_IRQHandler     ; TIM1 Trigger and Commutation and TIM11
+                DCD     TIM1_CC_IRQHandler                ; TIM1 Capture Compare                                   
+                DCD     TIM2_IRQHandler                   ; TIM2                                            
+                DCD     TIM3_IRQHandler                   ; TIM3                                            
+                DCD     TIM4_IRQHandler                   ; TIM4                                            
+                DCD     I2C1_EV_IRQHandler                ; I2C1 Event                                             
+                DCD     I2C1_ER_IRQHandler                ; I2C1 Error                                             
+                DCD     I2C2_EV_IRQHandler                ; I2C2 Event                                             
+                DCD     I2C2_ER_IRQHandler                ; I2C2 Error                                               
+                DCD     SPI1_IRQHandler                   ; SPI1                                            
+                DCD     SPI2_IRQHandler                   ; SPI2                                            
+                DCD     USART1_IRQHandler                 ; USART1                                          
+                DCD     USART2_IRQHandler                 ; USART2                                          
+                DCD     USART3_IRQHandler                 ; USART3                                          
+                DCD     EXTI15_10_IRQHandler              ; External Line[15:10]s                                  
+                DCD     RTC_Alarm_IRQHandler              ; RTC Alarm (A and B) through EXTI Line                  
+                DCD     OTG_FS_WKUP_IRQHandler            ; USB OTG FS Wakeup through EXTI line                        
+                DCD     TIM8_BRK_TIM12_IRQHandler         ; TIM8 Break and TIM12                  
+                DCD     TIM8_UP_TIM13_IRQHandler          ; TIM8 Update and TIM13                 
+                DCD     TIM8_TRG_COM_TIM14_IRQHandler     ; TIM8 Trigger and Commutation and TIM14
+                DCD     TIM8_CC_IRQHandler                ; TIM8 Capture Compare                                   
+                DCD     DMA1_Stream7_IRQHandler           ; DMA1 Stream7                                           
+                DCD     FMC_IRQHandler                    ; FMC                                             
+                DCD     SDMMC1_IRQHandler                  ; SDMMC1                                            
+                DCD     TIM5_IRQHandler                   ; TIM5                                            
+                DCD     SPI3_IRQHandler                   ; SPI3                                            
+                DCD     UART4_IRQHandler                  ; UART4                                           
+                DCD     UART5_IRQHandler                  ; UART5                                           
+                DCD     TIM6_DAC_IRQHandler               ; TIM6 and DAC1&2 underrun errors                   
+                DCD     TIM7_IRQHandler                   ; TIM7                   
+                DCD     DMA2_Stream0_IRQHandler           ; DMA2 Stream 0                                   
+                DCD     DMA2_Stream1_IRQHandler           ; DMA2 Stream 1                                   
+                DCD     DMA2_Stream2_IRQHandler           ; DMA2 Stream 2                                   
+                DCD     DMA2_Stream3_IRQHandler           ; DMA2 Stream 3                                   
+                DCD     DMA2_Stream4_IRQHandler           ; DMA2 Stream 4                                   
+                DCD     ETH_IRQHandler                    ; Ethernet                                        
+                DCD     ETH_WKUP_IRQHandler               ; Ethernet Wakeup through EXTI line                      
+                DCD     CAN2_TX_IRQHandler                ; CAN2 TX                                                
+                DCD     CAN2_RX0_IRQHandler               ; CAN2 RX0                                               
+                DCD     CAN2_RX1_IRQHandler               ; CAN2 RX1                                               
+                DCD     CAN2_SCE_IRQHandler               ; CAN2 SCE                                               
+                DCD     OTG_FS_IRQHandler                 ; USB OTG FS                                      
+                DCD     DMA2_Stream5_IRQHandler           ; DMA2 Stream 5                                   
+                DCD     DMA2_Stream6_IRQHandler           ; DMA2 Stream 6                                   
+                DCD     DMA2_Stream7_IRQHandler           ; DMA2 Stream 7                                   
+                DCD     USART6_IRQHandler                 ; USART6                                           
+                DCD     I2C3_EV_IRQHandler                ; I2C3 event                                             
+                DCD     I2C3_ER_IRQHandler                ; I2C3 error                                             
+                DCD     OTG_HS_EP1_OUT_IRQHandler         ; USB OTG HS End Point 1 Out                      
+                DCD     OTG_HS_EP1_IN_IRQHandler          ; USB OTG HS End Point 1 In                       
+                DCD     OTG_HS_WKUP_IRQHandler            ; USB OTG HS Wakeup through EXTI                         
+                DCD     OTG_HS_IRQHandler                 ; USB OTG HS                                      
+                DCD     DCMI_IRQHandler                   ; DCMI                                            
+                DCD     0                                 ; Reserved                                     
+                DCD     RNG_IRQHandler                    ; Hash and Rng
+                DCD     FPU_IRQHandler                    ; FPU
+                DCD     UART7_IRQHandler                  ; UART7
+                DCD     UART8_IRQHandler                  ; UART8
+                DCD     SPI4_IRQHandler                   ; SPI4
+                DCD     SPI5_IRQHandler                   ; SPI5
+                DCD     SPI6_IRQHandler                   ; SPI6
+                DCD     SAI1_IRQHandler                   ; SAI1
+                DCD     LTDC_IRQHandler                   ; LTDC
+                DCD     LTDC_ER_IRQHandler                ; LTDC error
+                DCD     DMA2D_IRQHandler                  ; DMA2D
+                DCD     SAI2_IRQHandler                   ; SAI2
+                DCD     QUADSPI_IRQHandler                ; QUADSPI
+                DCD     LPTIM1_IRQHandler                 ; LPTIM1
+                DCD     CEC_IRQHandler                    ; HDMI_CEC
+                DCD     I2C4_EV_IRQHandler                ; I2C4 Event                                             
+                DCD     I2C4_ER_IRQHandler                ; I2C4 Error 
+                DCD     SPDIF_RX_IRQHandler               ; SPDIF_RX
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+        IMPORT  SystemInit
+        IMPORT  __main
+
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                   [WEAK]                                        
+                EXPORT  PVD_IRQHandler                    [WEAK]                      
+                EXPORT  TAMP_STAMP_IRQHandler             [WEAK]         
+                EXPORT  RTC_WKUP_IRQHandler               [WEAK]                     
+                EXPORT  FLASH_IRQHandler                  [WEAK]                                         
+                EXPORT  RCC_IRQHandler                    [WEAK]                                            
+                EXPORT  EXTI0_IRQHandler                  [WEAK]                                            
+                EXPORT  EXTI1_IRQHandler                  [WEAK]                                             
+                EXPORT  EXTI2_IRQHandler                  [WEAK]                                            
+                EXPORT  EXTI3_IRQHandler                  [WEAK]                                           
+                EXPORT  EXTI4_IRQHandler                  [WEAK]                                            
+                EXPORT  DMA1_Stream0_IRQHandler           [WEAK]                                
+                EXPORT  DMA1_Stream1_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream2_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream3_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream4_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream5_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream6_IRQHandler           [WEAK]                                   
+                EXPORT  ADC_IRQHandler                    [WEAK]                         
+                EXPORT  CAN1_TX_IRQHandler                [WEAK]                                                
+                EXPORT  CAN1_RX0_IRQHandler               [WEAK]                                               
+                EXPORT  CAN1_RX1_IRQHandler               [WEAK]                                                
+                EXPORT  CAN1_SCE_IRQHandler               [WEAK]                                                
+                EXPORT  EXTI9_5_IRQHandler                [WEAK]                                    
+                EXPORT  TIM1_BRK_TIM9_IRQHandler          [WEAK]                  
+                EXPORT  TIM1_UP_TIM10_IRQHandler          [WEAK]                
+                EXPORT  TIM1_TRG_COM_TIM11_IRQHandler     [WEAK] 
+                EXPORT  TIM1_CC_IRQHandler                [WEAK]                                   
+                EXPORT  TIM2_IRQHandler                   [WEAK]                                            
+                EXPORT  TIM3_IRQHandler                   [WEAK]                                            
+                EXPORT  TIM4_IRQHandler                   [WEAK]                                            
+                EXPORT  I2C1_EV_IRQHandler                [WEAK]                                             
+                EXPORT  I2C1_ER_IRQHandler                [WEAK]                                             
+                EXPORT  I2C2_EV_IRQHandler                [WEAK]                                            
+                EXPORT  I2C2_ER_IRQHandler                [WEAK]                                               
+                EXPORT  SPI1_IRQHandler                   [WEAK]                                           
+                EXPORT  SPI2_IRQHandler                   [WEAK]                                            
+                EXPORT  USART1_IRQHandler                 [WEAK]                                          
+                EXPORT  USART2_IRQHandler                 [WEAK]                                          
+                EXPORT  USART3_IRQHandler                 [WEAK]                                         
+                EXPORT  EXTI15_10_IRQHandler              [WEAK]                                  
+                EXPORT  RTC_Alarm_IRQHandler              [WEAK]                  
+                EXPORT  OTG_FS_WKUP_IRQHandler            [WEAK]                        
+                EXPORT  TIM8_BRK_TIM12_IRQHandler         [WEAK]                 
+                EXPORT  TIM8_UP_TIM13_IRQHandler          [WEAK]                 
+                EXPORT  TIM8_TRG_COM_TIM14_IRQHandler     [WEAK] 
+                EXPORT  TIM8_CC_IRQHandler                [WEAK]                                   
+                EXPORT  DMA1_Stream7_IRQHandler           [WEAK]                                          
+                EXPORT  FMC_IRQHandler                    [WEAK]                                             
+                EXPORT  SDMMC1_IRQHandler                 [WEAK]                                             
+                EXPORT  TIM5_IRQHandler                   [WEAK]                                             
+                EXPORT  SPI3_IRQHandler                   [WEAK]                                             
+                EXPORT  UART4_IRQHandler                  [WEAK]                                            
+                EXPORT  UART5_IRQHandler                  [WEAK]                                            
+                EXPORT  TIM6_DAC_IRQHandler               [WEAK]                   
+                EXPORT  TIM7_IRQHandler                   [WEAK]                    
+                EXPORT  DMA2_Stream0_IRQHandler           [WEAK]                                  
+                EXPORT  DMA2_Stream1_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream2_IRQHandler           [WEAK]                                    
+                EXPORT  DMA2_Stream3_IRQHandler           [WEAK]                                    
+                EXPORT  DMA2_Stream4_IRQHandler           [WEAK]                                 
+                EXPORT  ETH_IRQHandler                    [WEAK]                                         
+                EXPORT  ETH_WKUP_IRQHandler               [WEAK]                     
+                EXPORT  CAN2_TX_IRQHandler                [WEAK]                                               
+                EXPORT  CAN2_RX0_IRQHandler               [WEAK]                                               
+                EXPORT  CAN2_RX1_IRQHandler               [WEAK]                                               
+                EXPORT  CAN2_SCE_IRQHandler               [WEAK]                                               
+                EXPORT  OTG_FS_IRQHandler                 [WEAK]                                       
+                EXPORT  DMA2_Stream5_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream6_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream7_IRQHandler           [WEAK]                                   
+                EXPORT  USART6_IRQHandler                 [WEAK]                                           
+                EXPORT  I2C3_EV_IRQHandler                [WEAK]                                              
+                EXPORT  I2C3_ER_IRQHandler                [WEAK]                                              
+                EXPORT  OTG_HS_EP1_OUT_IRQHandler         [WEAK]                      
+                EXPORT  OTG_HS_EP1_IN_IRQHandler          [WEAK]                      
+                EXPORT  OTG_HS_WKUP_IRQHandler            [WEAK]                        
+                EXPORT  OTG_HS_IRQHandler                 [WEAK]                                      
+                EXPORT  DCMI_IRQHandler                   [WEAK]                                             
+                EXPORT  RNG_IRQHandler                    [WEAK]
+                EXPORT  FPU_IRQHandler                    [WEAK]
+                EXPORT  UART7_IRQHandler                  [WEAK]
+                EXPORT  UART8_IRQHandler                  [WEAK]
+                EXPORT  SPI4_IRQHandler                   [WEAK]
+                EXPORT  SPI5_IRQHandler                   [WEAK]
+                EXPORT  SPI6_IRQHandler                   [WEAK]
+                EXPORT  SAI1_IRQHandler                   [WEAK]
+                EXPORT  LTDC_IRQHandler                   [WEAK]
+                EXPORT  LTDC_ER_IRQHandler                [WEAK]
+                EXPORT  DMA2D_IRQHandler                  [WEAK]
+                EXPORT  SAI2_IRQHandler                   [WEAK]   
+                EXPORT  QUADSPI_IRQHandler                [WEAK]
+                EXPORT  LPTIM1_IRQHandler                 [WEAK]
+                EXPORT  CEC_IRQHandler                    [WEAK]   
+                EXPORT  I2C4_EV_IRQHandler                [WEAK]
+                EXPORT  I2C4_ER_IRQHandler                [WEAK]
+                EXPORT  SPDIF_RX_IRQHandler               [WEAK]
+
+WWDG_IRQHandler                                                       
+PVD_IRQHandler                                      
+TAMP_STAMP_IRQHandler                  
+RTC_WKUP_IRQHandler                                
+FLASH_IRQHandler                                                       
+RCC_IRQHandler                                                            
+EXTI0_IRQHandler                                                          
+EXTI1_IRQHandler                                                           
+EXTI2_IRQHandler                                                          
+EXTI3_IRQHandler                                                         
+EXTI4_IRQHandler                                                          
+DMA1_Stream0_IRQHandler                                       
+DMA1_Stream1_IRQHandler                                          
+DMA1_Stream2_IRQHandler                                          
+DMA1_Stream3_IRQHandler                                          
+DMA1_Stream4_IRQHandler                                          
+DMA1_Stream5_IRQHandler                                          
+DMA1_Stream6_IRQHandler                                          
+ADC_IRQHandler                                         
+CAN1_TX_IRQHandler                                                            
+CAN1_RX0_IRQHandler                                                          
+CAN1_RX1_IRQHandler                                                           
+CAN1_SCE_IRQHandler                                                           
+EXTI9_5_IRQHandler                                                
+TIM1_BRK_TIM9_IRQHandler                        
+TIM1_UP_TIM10_IRQHandler                      
+TIM1_TRG_COM_TIM11_IRQHandler  
+TIM1_CC_IRQHandler                                               
+TIM2_IRQHandler                                                           
+TIM3_IRQHandler                                                           
+TIM4_IRQHandler                                                           
+I2C1_EV_IRQHandler                                                         
+I2C1_ER_IRQHandler                                                         
+I2C2_EV_IRQHandler                                                        
+I2C2_ER_IRQHandler                                                           
+SPI1_IRQHandler                                                          
+SPI2_IRQHandler                                                           
+USART1_IRQHandler                                                       
+USART2_IRQHandler                                                       
+USART3_IRQHandler                                                      
+EXTI15_10_IRQHandler                                            
+RTC_Alarm_IRQHandler                            
+OTG_FS_WKUP_IRQHandler                                
+TIM8_BRK_TIM12_IRQHandler                      
+TIM8_UP_TIM13_IRQHandler                       
+TIM8_TRG_COM_TIM14_IRQHandler  
+TIM8_CC_IRQHandler                                               
+DMA1_Stream7_IRQHandler                                                 
+FMC_IRQHandler                                                            
+SDMMC1_IRQHandler                                                            
+TIM5_IRQHandler                                                            
+SPI3_IRQHandler                                                            
+UART4_IRQHandler                                                          
+UART5_IRQHandler                                                          
+TIM6_DAC_IRQHandler                            
+TIM7_IRQHandler                              
+DMA2_Stream0_IRQHandler                                         
+DMA2_Stream1_IRQHandler                                          
+DMA2_Stream2_IRQHandler                                           
+DMA2_Stream3_IRQHandler                                           
+DMA2_Stream4_IRQHandler                                        
+ETH_IRQHandler                                                         
+ETH_WKUP_IRQHandler                                
+CAN2_TX_IRQHandler                                                           
+CAN2_RX0_IRQHandler                                                          
+CAN2_RX1_IRQHandler                                                          
+CAN2_SCE_IRQHandler                                                          
+OTG_FS_IRQHandler                                                    
+DMA2_Stream5_IRQHandler                                          
+DMA2_Stream6_IRQHandler                                          
+DMA2_Stream7_IRQHandler                                          
+USART6_IRQHandler                                                        
+I2C3_EV_IRQHandler                                                          
+I2C3_ER_IRQHandler                                                          
+OTG_HS_EP1_OUT_IRQHandler                           
+OTG_HS_EP1_IN_IRQHandler                            
+OTG_HS_WKUP_IRQHandler                                
+OTG_HS_IRQHandler                                                   
+DCMI_IRQHandler                                                            
+RNG_IRQHandler
+FPU_IRQHandler  
+UART7_IRQHandler                  
+UART8_IRQHandler                  
+SPI4_IRQHandler                   
+SPI5_IRQHandler                   
+SPI6_IRQHandler                   
+SAI1_IRQHandler                   
+LTDC_IRQHandler                   
+LTDC_ER_IRQHandler                 
+DMA2D_IRQHandler   
+SAI2_IRQHandler        
+QUADSPI_IRQHandler
+LPTIM1_IRQHandler
+CEC_IRQHandler
+I2C4_EV_IRQHandler
+I2C4_ER_IRQHandler
+SPDIF_RX_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+                END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/TOOLCHAIN_ARM_STD/stm32f746ng.sct	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2016, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+;     this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+;    this list of conditions and the following disclaimer in the documentation
+;    and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+;    may be used to endorse or promote products derived from this software
+;    without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F746NG: 1024 KB FLASH (0x100000) + 320 KB SRAM (0x50000)
+LR_IROM1 0x08000000 0x100000  {    ; load region size_region
+
+  ER_IROM1 0x08000000 0x100000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+
+  ; Total: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM
+  RW_IRAM1 (0x20000000+0x1C8) (0x50000-0x1C8)  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/TOOLCHAIN_ARM_STD/sys.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model, 
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif 
+
+#include <rt_misc.h>
+#include <stdint.h>
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+    uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+    uint32_t sp_limit = __current_sp();
+
+    zi_limit = (zi_limit + 7) & ~0x7;    // ensure zi_limit is 8-byte aligned
+
+    struct __initial_stackheap r;
+    r.heap_base = zi_limit;
+    r.heap_limit = sp_limit;
+    return r;
+}
+
+#ifdef __cplusplus
+}
+#endif 

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/TOOLCHAIN_GCC_ARM/STM32F746NG.ld	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{ 
+  FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
+  RAM (rwx)  : ORIGIN = 0x200001C8, LENGTH = 320K - 0x1C8
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ * 
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ *   _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+    .text :
+    {
+        KEEP(*(.isr_vector))
+        *(.text*)
+        KEEP(*(.init))
+        KEEP(*(.fini))
+
+        /* .ctors */
+        *crtbegin.o(.ctors)
+        *crtbegin?.o(.ctors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+        *(SORT(.ctors.*))
+        *(.ctors)
+
+        /* .dtors */
+        *crtbegin.o(.dtors)
+        *crtbegin?.o(.dtors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+        *(SORT(.dtors.*))
+        *(.dtors)
+
+        *(.rodata*)
+
+        KEEP(*(.eh_frame*))
+    } > FLASH
+
+    .ARM.extab :
+    {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } > FLASH
+
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > FLASH
+    __exidx_end = .;
+
+    __etext = .;
+    _sidata = .;
+
+    .data : AT (__etext)
+    {
+        __data_start__ = .;
+        _sdata = .;
+        *(vtable)
+        *(.data*)
+
+        . = ALIGN(4);
+        /* preinit data */
+        PROVIDE_HIDDEN (__preinit_array_start = .);
+        KEEP(*(.preinit_array))
+        PROVIDE_HIDDEN (__preinit_array_end = .);
+
+        . = ALIGN(4);
+        /* init data */
+        PROVIDE_HIDDEN (__init_array_start = .);
+        KEEP(*(SORT(.init_array.*)))
+        KEEP(*(.init_array))
+        PROVIDE_HIDDEN (__init_array_end = .);
+
+
+        . = ALIGN(4);
+        /* finit data */
+        PROVIDE_HIDDEN (__fini_array_start = .);
+        KEEP(*(SORT(.fini_array.*)))
+        KEEP(*(.fini_array))
+        PROVIDE_HIDDEN (__fini_array_end = .);
+
+        KEEP(*(.jcr*))
+        . = ALIGN(4);
+        /* All data end */
+        __data_end__ = .;
+        _edata = .;
+
+    } > RAM
+
+    .bss :
+    {
+        . = ALIGN(4);
+        __bss_start__ = .;
+        _sbss = .;
+        *(.bss*)
+        *(COMMON)
+        . = ALIGN(4);
+        __bss_end__ = .;
+        _ebss = .;
+    } > RAM
+
+    .heap (COPY):
+    {
+        __end__ = .;
+        end = __end__;
+        *(.heap*)
+        __HeapLimit = .;
+    } > RAM
+
+    /* .stack_dummy section doesn't contains any symbols. It is only
+     * used for linker to calculate size of stack sections, and assign
+     * values to stack symbols later */
+    .stack_dummy (COPY):
+    {
+        *(.stack*)
+    } > RAM
+
+    /* Set stack top to end of RAM, and stack limit move down by
+     * size of stack_dummy section */
+    __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+    _estack = __StackTop;
+    __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+    PROVIDE(__stack = __StackTop);
+
+    /* Check if data + heap + stack exceeds RAM limit */
+    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/TOOLCHAIN_GCC_ARM/startup_stm32f746xx.S	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,596 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f746xx.s
+  * @author    MCD Application Team
+  * @Version    V1.0.2
+  * @Date       21-September-2015
+  * @brief     STM32F746xx Devices vector table for GCC based toolchain. 
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M7 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+    
+  .syntax unified
+  .cpu cortex-m7
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */  
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval : None
+*/
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:  
+  ldr   sp, =_estack      /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */  
+  movs  r1, #0
+  b  LoopCopyDataInit
+
+CopyDataInit:
+  ldr  r3, =_sidata
+  ldr  r3, [r3, r1]
+  str  r3, [r0, r1]
+  adds  r1, r1, #4
+    
+LoopCopyDataInit:
+  ldr  r0, =_sdata
+  ldr  r3, =_edata
+  adds  r2, r0, r1
+  cmp  r2, r3
+  bcc  CopyDataInit
+  ldr  r2, =_sbss
+  b  LoopFillZerobss
+/* Zero fill the bss segment. */  
+FillZerobss:
+  movs  r3, #0
+  str  r3, [r2], #4
+    
+LoopFillZerobss:
+  ldr  r3, = _ebss
+  cmp  r2, r3
+  bcc  FillZerobss
+
+/* Call the clock system initialization function.*/
+  bl  SystemInit   
+/* Call static constructors */
+  //bl __libc_init_array
+/* Call the application's entry point.*/
+  //bl  main
+  // Calling the crt0 'cold-start' entry point. There __libc_init_array is called
+  // and when existing hardware_init_hook() and software_init_hook() before 
+  // starting main(). software_init_hook() is available and has to be called due 
+  // to initializsation when using rtos.
+  bl _start
+  bx  lr    
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M7. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+* 
+*******************************************************************************/
+   .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+   
+   
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  
+  /* External Interrupts */
+  .word     WWDG_IRQHandler                   /* Window WatchDog              */                                        
+  .word     PVD_IRQHandler                    /* PVD through EXTI Line detection */                        
+  .word     TAMP_STAMP_IRQHandler             /* Tamper and TimeStamps through the EXTI line */            
+  .word     RTC_WKUP_IRQHandler               /* RTC Wakeup through the EXTI line */                      
+  .word     FLASH_IRQHandler                  /* FLASH                        */                                          
+  .word     RCC_IRQHandler                    /* RCC                          */                                            
+  .word     EXTI0_IRQHandler                  /* EXTI Line0                   */                        
+  .word     EXTI1_IRQHandler                  /* EXTI Line1                   */                          
+  .word     EXTI2_IRQHandler                  /* EXTI Line2                   */                          
+  .word     EXTI3_IRQHandler                  /* EXTI Line3                   */                          
+  .word     EXTI4_IRQHandler                  /* EXTI Line4                   */                          
+  .word     DMA1_Stream0_IRQHandler           /* DMA1 Stream 0                */                  
+  .word     DMA1_Stream1_IRQHandler           /* DMA1 Stream 1                */                   
+  .word     DMA1_Stream2_IRQHandler           /* DMA1 Stream 2                */                   
+  .word     DMA1_Stream3_IRQHandler           /* DMA1 Stream 3                */                   
+  .word     DMA1_Stream4_IRQHandler           /* DMA1 Stream 4                */                   
+  .word     DMA1_Stream5_IRQHandler           /* DMA1 Stream 5                */                   
+  .word     DMA1_Stream6_IRQHandler           /* DMA1 Stream 6                */                   
+  .word     ADC_IRQHandler                    /* ADC1, ADC2 and ADC3s         */                   
+  .word     CAN1_TX_IRQHandler                /* CAN1 TX                      */                         
+  .word     CAN1_RX0_IRQHandler               /* CAN1 RX0                     */                          
+  .word     CAN1_RX1_IRQHandler               /* CAN1 RX1                     */                          
+  .word     CAN1_SCE_IRQHandler               /* CAN1 SCE                     */                          
+  .word     EXTI9_5_IRQHandler                /* External Line[9:5]s          */                          
+  .word     TIM1_BRK_TIM9_IRQHandler          /* TIM1 Break and TIM9          */         
+  .word     TIM1_UP_TIM10_IRQHandler          /* TIM1 Update and TIM10        */         
+  .word     TIM1_TRG_COM_TIM11_IRQHandler     /* TIM1 Trigger and Commutation and TIM11 */
+  .word     TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */                          
+  .word     TIM2_IRQHandler                   /* TIM2                         */                   
+  .word     TIM3_IRQHandler                   /* TIM3                         */                   
+  .word     TIM4_IRQHandler                   /* TIM4                         */                   
+  .word     I2C1_EV_IRQHandler                /* I2C1 Event                   */                          
+  .word     I2C1_ER_IRQHandler                /* I2C1 Error                   */                          
+  .word     I2C2_EV_IRQHandler                /* I2C2 Event                   */                          
+  .word     I2C2_ER_IRQHandler                /* I2C2 Error                   */                            
+  .word     SPI1_IRQHandler                   /* SPI1                         */                   
+  .word     SPI2_IRQHandler                   /* SPI2                         */                   
+  .word     USART1_IRQHandler                 /* USART1                       */                   
+  .word     USART2_IRQHandler                 /* USART2                       */                   
+  .word     USART3_IRQHandler                 /* USART3                       */                   
+  .word     EXTI15_10_IRQHandler              /* External Line[15:10]s        */                          
+  .word     RTC_Alarm_IRQHandler              /* RTC Alarm (A and B) through EXTI Line */                 
+  .word     OTG_FS_WKUP_IRQHandler            /* USB OTG FS Wakeup through EXTI line */                       
+  .word     TIM8_BRK_TIM12_IRQHandler         /* TIM8 Break and TIM12         */         
+  .word     TIM8_UP_TIM13_IRQHandler          /* TIM8 Update and TIM13        */         
+  .word     TIM8_TRG_COM_TIM14_IRQHandler     /* TIM8 Trigger and Commutation and TIM14 */
+  .word     TIM8_CC_IRQHandler                /* TIM8 Capture Compare         */                          
+  .word     DMA1_Stream7_IRQHandler           /* DMA1 Stream7                 */                          
+  .word     FMC_IRQHandler                    /* FMC                          */                   
+  .word     SDMMC1_IRQHandler                 /* SDMMC1                       */                   
+  .word     TIM5_IRQHandler                   /* TIM5                         */                   
+  .word     SPI3_IRQHandler                   /* SPI3                         */                   
+  .word     UART4_IRQHandler                  /* UART4                        */                   
+  .word     UART5_IRQHandler                  /* UART5                        */                   
+  .word     TIM6_DAC_IRQHandler               /* TIM6 and DAC1&2 underrun errors */                   
+  .word     TIM7_IRQHandler                   /* TIM7                         */
+  .word     DMA2_Stream0_IRQHandler           /* DMA2 Stream 0                */                   
+  .word     DMA2_Stream1_IRQHandler           /* DMA2 Stream 1                */                   
+  .word     DMA2_Stream2_IRQHandler           /* DMA2 Stream 2                */                   
+  .word     DMA2_Stream3_IRQHandler           /* DMA2 Stream 3                */                   
+  .word     DMA2_Stream4_IRQHandler           /* DMA2 Stream 4                */                   
+  .word     ETH_IRQHandler                    /* Ethernet                     */                   
+  .word     ETH_WKUP_IRQHandler               /* Ethernet Wakeup through EXTI line */                     
+  .word     CAN2_TX_IRQHandler                /* CAN2 TX                      */                          
+  .word     CAN2_RX0_IRQHandler               /* CAN2 RX0                     */                          
+  .word     CAN2_RX1_IRQHandler               /* CAN2 RX1                     */                          
+  .word     CAN2_SCE_IRQHandler               /* CAN2 SCE                     */                          
+  .word     OTG_FS_IRQHandler                 /* USB OTG FS                   */                   
+  .word     DMA2_Stream5_IRQHandler           /* DMA2 Stream 5                */                   
+  .word     DMA2_Stream6_IRQHandler           /* DMA2 Stream 6                */                   
+  .word     DMA2_Stream7_IRQHandler           /* DMA2 Stream 7                */                   
+  .word     USART6_IRQHandler                 /* USART6                       */                    
+  .word     I2C3_EV_IRQHandler                /* I2C3 event                   */                          
+  .word     I2C3_ER_IRQHandler                /* I2C3 error                   */                          
+  .word     OTG_HS_EP1_OUT_IRQHandler         /* USB OTG HS End Point 1 Out   */                   
+  .word     OTG_HS_EP1_IN_IRQHandler          /* USB OTG HS End Point 1 In    */                   
+  .word     OTG_HS_WKUP_IRQHandler            /* USB OTG HS Wakeup through EXTI */                         
+  .word     OTG_HS_IRQHandler                 /* USB OTG HS                   */                   
+  .word     DCMI_IRQHandler                   /* DCMI                         */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     RNG_IRQHandler                    /* Rng                          */
+  .word     FPU_IRQHandler                    /* FPU                          */
+  .word     UART7_IRQHandler                  /* UART7                        */      
+  .word     UART8_IRQHandler                  /* UART8                        */
+  .word     SPI4_IRQHandler                   /* SPI4                         */
+  .word     SPI5_IRQHandler                   /* SPI5	 		              */
+  .word     SPI6_IRQHandler                   /* SPI6   			          */
+  .word     SAI1_IRQHandler                   /* SAI1						  */
+  .word     LTDC_IRQHandler                   /* LTDC					      */
+  .word     LTDC_ER_IRQHandler                /* LTDC error					  */
+  .word     DMA2D_IRQHandler                  /* DMA2D    				      */
+  .word     SAI2_IRQHandler                   /* SAI2                         */
+  .word     QUADSPI_IRQHandler                /* QUADSPI                      */
+  .word     LPTIM1_IRQHandler                 /* LPTIM1                       */
+  .word     CEC_IRQHandler                    /* HDMI_CEC                     */
+  .word     I2C4_EV_IRQHandler                /* I2C4 Event                   */
+  .word     I2C4_ER_IRQHandler                /* I2C4 Error                   */
+  .word     SPDIF_RX_IRQHandler               /* SPDIF_RX                     */  
+  
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+* 
+*******************************************************************************/
+   .weak      NMI_Handler
+   .thumb_set NMI_Handler,Default_Handler
+  
+   .weak      HardFault_Handler
+   .thumb_set HardFault_Handler,Default_Handler
+  
+   .weak      MemManage_Handler
+   .thumb_set MemManage_Handler,Default_Handler
+  
+   .weak      BusFault_Handler
+   .thumb_set BusFault_Handler,Default_Handler
+
+   .weak      UsageFault_Handler
+   .thumb_set UsageFault_Handler,Default_Handler
+
+   .weak      SVC_Handler
+   .thumb_set SVC_Handler,Default_Handler
+
+   .weak      DebugMon_Handler
+   .thumb_set DebugMon_Handler,Default_Handler
+
+   .weak      PendSV_Handler
+   .thumb_set PendSV_Handler,Default_Handler
+
+   .weak      SysTick_Handler
+   .thumb_set SysTick_Handler,Default_Handler              
+  
+   .weak      WWDG_IRQHandler                   
+   .thumb_set WWDG_IRQHandler,Default_Handler      
+                  
+   .weak      PVD_IRQHandler      
+   .thumb_set PVD_IRQHandler,Default_Handler
+               
+   .weak      TAMP_STAMP_IRQHandler            
+   .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+            
+   .weak      RTC_WKUP_IRQHandler                  
+   .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+            
+   .weak      FLASH_IRQHandler         
+   .thumb_set FLASH_IRQHandler,Default_Handler
+                  
+   .weak      RCC_IRQHandler      
+   .thumb_set RCC_IRQHandler,Default_Handler
+                  
+   .weak      EXTI0_IRQHandler         
+   .thumb_set EXTI0_IRQHandler,Default_Handler
+                  
+   .weak      EXTI1_IRQHandler         
+   .thumb_set EXTI1_IRQHandler,Default_Handler
+                     
+   .weak      EXTI2_IRQHandler         
+   .thumb_set EXTI2_IRQHandler,Default_Handler 
+                 
+   .weak      EXTI3_IRQHandler         
+   .thumb_set EXTI3_IRQHandler,Default_Handler
+                        
+   .weak      EXTI4_IRQHandler         
+   .thumb_set EXTI4_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream0_IRQHandler               
+   .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
+         
+   .weak      DMA1_Stream1_IRQHandler               
+   .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream2_IRQHandler               
+   .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream3_IRQHandler               
+   .thumb_set DMA1_Stream3_IRQHandler,Default_Handler 
+                 
+   .weak      DMA1_Stream4_IRQHandler              
+   .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream5_IRQHandler               
+   .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream6_IRQHandler               
+   .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
+                  
+   .weak      ADC_IRQHandler      
+   .thumb_set ADC_IRQHandler,Default_Handler
+               
+   .weak      CAN1_TX_IRQHandler   
+   .thumb_set CAN1_TX_IRQHandler,Default_Handler
+            
+   .weak      CAN1_RX0_IRQHandler                  
+   .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+                           
+   .weak      CAN1_RX1_IRQHandler                  
+   .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+            
+   .weak      CAN1_SCE_IRQHandler                  
+   .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+            
+   .weak      EXTI9_5_IRQHandler   
+   .thumb_set EXTI9_5_IRQHandler,Default_Handler
+            
+   .weak      TIM1_BRK_TIM9_IRQHandler            
+   .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+            
+   .weak      TIM1_UP_TIM10_IRQHandler            
+   .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+   .weak      TIM1_TRG_COM_TIM11_IRQHandler      
+   .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+      
+   .weak      TIM1_CC_IRQHandler   
+   .thumb_set TIM1_CC_IRQHandler,Default_Handler
+                  
+   .weak      TIM2_IRQHandler            
+   .thumb_set TIM2_IRQHandler,Default_Handler
+                  
+   .weak      TIM3_IRQHandler            
+   .thumb_set TIM3_IRQHandler,Default_Handler
+                  
+   .weak      TIM4_IRQHandler            
+   .thumb_set TIM4_IRQHandler,Default_Handler
+                  
+   .weak      I2C1_EV_IRQHandler   
+   .thumb_set I2C1_EV_IRQHandler,Default_Handler
+                     
+   .weak      I2C1_ER_IRQHandler   
+   .thumb_set I2C1_ER_IRQHandler,Default_Handler
+                     
+   .weak      I2C2_EV_IRQHandler   
+   .thumb_set I2C2_EV_IRQHandler,Default_Handler
+                  
+   .weak      I2C2_ER_IRQHandler   
+   .thumb_set I2C2_ER_IRQHandler,Default_Handler
+                           
+   .weak      SPI1_IRQHandler            
+   .thumb_set SPI1_IRQHandler,Default_Handler
+                        
+   .weak      SPI2_IRQHandler            
+   .thumb_set SPI2_IRQHandler,Default_Handler
+                  
+   .weak      USART1_IRQHandler      
+   .thumb_set USART1_IRQHandler,Default_Handler
+                     
+   .weak      USART2_IRQHandler      
+   .thumb_set USART2_IRQHandler,Default_Handler
+                     
+   .weak      USART3_IRQHandler      
+   .thumb_set USART3_IRQHandler,Default_Handler
+                  
+   .weak      EXTI15_10_IRQHandler               
+   .thumb_set EXTI15_10_IRQHandler,Default_Handler
+               
+   .weak      RTC_Alarm_IRQHandler               
+   .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+            
+   .weak      OTG_FS_WKUP_IRQHandler         
+   .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+            
+   .weak      TIM8_BRK_TIM12_IRQHandler         
+   .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+         
+   .weak      TIM8_UP_TIM13_IRQHandler            
+   .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+         
+   .weak      TIM8_TRG_COM_TIM14_IRQHandler      
+   .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+      
+   .weak      TIM8_CC_IRQHandler   
+   .thumb_set TIM8_CC_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream7_IRQHandler               
+   .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
+                     
+   .weak      FMC_IRQHandler            
+   .thumb_set FMC_IRQHandler,Default_Handler
+                     
+   .weak      SDMMC1_IRQHandler            
+   .thumb_set SDMMC1_IRQHandler,Default_Handler
+                     
+   .weak      TIM5_IRQHandler            
+   .thumb_set TIM5_IRQHandler,Default_Handler
+                     
+   .weak      SPI3_IRQHandler            
+   .thumb_set SPI3_IRQHandler,Default_Handler
+                     
+   .weak      UART4_IRQHandler         
+   .thumb_set UART4_IRQHandler,Default_Handler
+                  
+   .weak      UART5_IRQHandler         
+   .thumb_set UART5_IRQHandler,Default_Handler
+                  
+   .weak      TIM6_DAC_IRQHandler                  
+   .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+               
+   .weak      TIM7_IRQHandler            
+   .thumb_set TIM7_IRQHandler,Default_Handler
+         
+   .weak      DMA2_Stream0_IRQHandler               
+   .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
+               
+   .weak      DMA2_Stream1_IRQHandler               
+   .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream2_IRQHandler               
+   .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
+            
+   .weak      DMA2_Stream3_IRQHandler               
+   .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
+            
+   .weak      DMA2_Stream4_IRQHandler               
+   .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
+   
+   .weak      DMA2_Stream4_IRQHandler               
+   .thumb_set DMA2_Stream4_IRQHandler,Default_Handler   
+
+   .weak      ETH_IRQHandler   
+   .thumb_set ETH_IRQHandler,Default_Handler
+   
+   .weak      ETH_WKUP_IRQHandler   
+   .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+   .weak      CAN2_TX_IRQHandler   
+   .thumb_set CAN2_TX_IRQHandler,Default_Handler   
+                           
+   .weak      CAN2_RX0_IRQHandler                  
+   .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+                           
+   .weak      CAN2_RX1_IRQHandler                  
+   .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+                           
+   .weak      CAN2_SCE_IRQHandler                  
+   .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+                           
+   .weak      OTG_FS_IRQHandler      
+   .thumb_set OTG_FS_IRQHandler,Default_Handler
+                     
+   .weak      DMA2_Stream5_IRQHandler               
+   .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream6_IRQHandler               
+   .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream7_IRQHandler               
+   .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
+                  
+   .weak      USART6_IRQHandler      
+   .thumb_set USART6_IRQHandler,Default_Handler
+                        
+   .weak      I2C3_EV_IRQHandler   
+   .thumb_set I2C3_EV_IRQHandler,Default_Handler
+                        
+   .weak      I2C3_ER_IRQHandler   
+   .thumb_set I2C3_ER_IRQHandler,Default_Handler
+                        
+   .weak      OTG_HS_EP1_OUT_IRQHandler         
+   .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
+               
+   .weak      OTG_HS_EP1_IN_IRQHandler            
+   .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
+               
+   .weak      OTG_HS_WKUP_IRQHandler         
+   .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
+            
+   .weak      OTG_HS_IRQHandler      
+   .thumb_set OTG_HS_IRQHandler,Default_Handler
+                  
+   .weak      DCMI_IRQHandler            
+   .thumb_set DCMI_IRQHandler,Default_Handler
+
+   .weak      RNG_IRQHandler            
+   .thumb_set RNG_IRQHandler,Default_Handler   
+
+   .weak      FPU_IRQHandler                  
+   .thumb_set FPU_IRQHandler,Default_Handler
+
+   .weak      UART7_IRQHandler                  
+   .thumb_set UART7_IRQHandler,Default_Handler
+
+   .weak      UART8_IRQHandler                  
+   .thumb_set UART8_IRQHandler,Default_Handler   
+
+   .weak      SPI4_IRQHandler            
+   .thumb_set SPI4_IRQHandler,Default_Handler
+   
+   .weak      SPI5_IRQHandler            
+   .thumb_set SPI5_IRQHandler,Default_Handler
+
+   .weak      SPI6_IRQHandler            
+   .thumb_set SPI6_IRQHandler,Default_Handler   
+
+   .weak      SAI1_IRQHandler            
+   .thumb_set SAI1_IRQHandler,Default_Handler
+   
+   .weak      LTDC_IRQHandler            
+   .thumb_set LTDC_IRQHandler,Default_Handler
+
+   .weak      LTDC_ER_IRQHandler            
+   .thumb_set LTDC_ER_IRQHandler,Default_Handler
+
+   .weak      DMA2D_IRQHandler            
+   .thumb_set DMA2D_IRQHandler,Default_Handler   
+
+   .weak      SAI2_IRQHandler            
+   .thumb_set SAI2_IRQHandler,Default_Handler
+   
+   .weak      QUADSPI_IRQHandler            
+   .thumb_set QUADSPI_IRQHandler,Default_Handler
+ 
+   .weak      LPTIM1_IRQHandler            
+   .thumb_set LPTIM1_IRQHandler,Default_Handler
+
+   .weak      CEC_IRQHandler            
+   .thumb_set CEC_IRQHandler,Default_Handler
+   
+   .weak      I2C4_EV_IRQHandler            
+   .thumb_set I2C4_EV_IRQHandler,Default_Handler 
+ 
+   .weak      I2C4_ER_IRQHandler            
+   .thumb_set I2C4_ER_IRQHandler,Default_Handler
+   
+   .weak      SPDIF_RX_IRQHandler            
+   .thumb_set SPDIF_RX_IRQHandler,Default_Handler 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/		
+ 

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/TOOLCHAIN_IAR/startup_stm32f746xx.S	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,732 @@
+;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32f746xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.0.2
+;* Date               : 21-September-2015
+;* Description        : STM32F746xx devices vector table for EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == _iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      - Branches to main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M7 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler                   ; Window WatchDog                                        
+        DCD     PVD_IRQHandler                    ; PVD through EXTI Line detection                        
+        DCD     TAMP_STAMP_IRQHandler             ; Tamper and TimeStamps through the EXTI line            
+        DCD     RTC_WKUP_IRQHandler               ; RTC Wakeup through the EXTI line                       
+        DCD     FLASH_IRQHandler                  ; FLASH                                           
+        DCD     RCC_IRQHandler                    ; RCC                                             
+        DCD     EXTI0_IRQHandler                  ; EXTI Line0                                             
+        DCD     EXTI1_IRQHandler                  ; EXTI Line1                                             
+        DCD     EXTI2_IRQHandler                  ; EXTI Line2                                             
+        DCD     EXTI3_IRQHandler                  ; EXTI Line3                                             
+        DCD     EXTI4_IRQHandler                  ; EXTI Line4                                             
+        DCD     DMA1_Stream0_IRQHandler           ; DMA1 Stream 0                                   
+        DCD     DMA1_Stream1_IRQHandler           ; DMA1 Stream 1                                   
+        DCD     DMA1_Stream2_IRQHandler           ; DMA1 Stream 2                                   
+        DCD     DMA1_Stream3_IRQHandler           ; DMA1 Stream 3                                   
+        DCD     DMA1_Stream4_IRQHandler           ; DMA1 Stream 4                                   
+        DCD     DMA1_Stream5_IRQHandler           ; DMA1 Stream 5                                   
+        DCD     DMA1_Stream6_IRQHandler           ; DMA1 Stream 6                                   
+        DCD     ADC_IRQHandler                    ; ADC1, ADC2 and ADC3s                            
+        DCD     CAN1_TX_IRQHandler                ; CAN1 TX                                                
+        DCD     CAN1_RX0_IRQHandler               ; CAN1 RX0                                               
+        DCD     CAN1_RX1_IRQHandler               ; CAN1 RX1                                               
+        DCD     CAN1_SCE_IRQHandler               ; CAN1 SCE                                               
+        DCD     EXTI9_5_IRQHandler                ; External Line[9:5]s                                    
+        DCD     TIM1_BRK_TIM9_IRQHandler          ; TIM1 Break and TIM9                   
+        DCD     TIM1_UP_TIM10_IRQHandler          ; TIM1 Update and TIM10                 
+        DCD     TIM1_TRG_COM_TIM11_IRQHandler     ; TIM1 Trigger and Commutation and TIM11
+        DCD     TIM1_CC_IRQHandler                ; TIM1 Capture Compare                                   
+        DCD     TIM2_IRQHandler                   ; TIM2                                            
+        DCD     TIM3_IRQHandler                   ; TIM3                                            
+        DCD     TIM4_IRQHandler                   ; TIM4                                            
+        DCD     I2C1_EV_IRQHandler                ; I2C1 Event                                             
+        DCD     I2C1_ER_IRQHandler                ; I2C1 Error                                             
+        DCD     I2C2_EV_IRQHandler                ; I2C2 Event                                             
+        DCD     I2C2_ER_IRQHandler                ; I2C2 Error                                               
+        DCD     SPI1_IRQHandler                   ; SPI1                                            
+        DCD     SPI2_IRQHandler                   ; SPI2                                            
+        DCD     USART1_IRQHandler                 ; USART1                                          
+        DCD     USART2_IRQHandler                 ; USART2                                          
+        DCD     USART3_IRQHandler                 ; USART3                                          
+        DCD     EXTI15_10_IRQHandler              ; External Line[15:10]s                                  
+        DCD     RTC_Alarm_IRQHandler              ; RTC Alarm (A and B) through EXTI Line                  
+        DCD     OTG_FS_WKUP_IRQHandler            ; USB OTG FS Wakeup through EXTI line                        
+        DCD     TIM8_BRK_TIM12_IRQHandler         ; TIM8 Break and TIM12                  
+        DCD     TIM8_UP_TIM13_IRQHandler          ; TIM8 Update and TIM13                 
+        DCD     TIM8_TRG_COM_TIM14_IRQHandler     ; TIM8 Trigger and Commutation and TIM14
+        DCD     TIM8_CC_IRQHandler                ; TIM8 Capture Compare                                   
+        DCD     DMA1_Stream7_IRQHandler           ; DMA1 Stream7                                           
+        DCD     FMC_IRQHandler                    ; FMC                                            
+        DCD     SDMMC1_IRQHandler                 ; SDMMC1                                            
+        DCD     TIM5_IRQHandler                   ; TIM5                                            
+        DCD     SPI3_IRQHandler                   ; SPI3                                            
+        DCD     UART4_IRQHandler                  ; UART4                                           
+        DCD     UART5_IRQHandler                  ; UART5                                           
+        DCD     TIM6_DAC_IRQHandler               ; TIM6 and DAC1&2 underrun errors                   
+        DCD     TIM7_IRQHandler                   ; TIM7                   
+        DCD     DMA2_Stream0_IRQHandler           ; DMA2 Stream 0                                   
+        DCD     DMA2_Stream1_IRQHandler           ; DMA2 Stream 1                                   
+        DCD     DMA2_Stream2_IRQHandler           ; DMA2 Stream 2                                   
+        DCD     DMA2_Stream3_IRQHandler           ; DMA2 Stream 3                                   
+        DCD     DMA2_Stream4_IRQHandler           ; DMA2 Stream 4                                   
+        DCD     ETH_IRQHandler                    ; Ethernet                                        
+        DCD     ETH_WKUP_IRQHandler               ; Ethernet Wakeup through EXTI line                      
+        DCD     CAN2_TX_IRQHandler                ; CAN2 TX                                                
+        DCD     CAN2_RX0_IRQHandler               ; CAN2 RX0                                               
+        DCD     CAN2_RX1_IRQHandler               ; CAN2 RX1                                               
+        DCD     CAN2_SCE_IRQHandler               ; CAN2 SCE                                               
+        DCD     OTG_FS_IRQHandler                 ; USB OTG FS                                      
+        DCD     DMA2_Stream5_IRQHandler           ; DMA2 Stream 5                                   
+        DCD     DMA2_Stream6_IRQHandler           ; DMA2 Stream 6                                   
+        DCD     DMA2_Stream7_IRQHandler           ; DMA2 Stream 7                                   
+        DCD     USART6_IRQHandler                 ; USART6                                           
+        DCD     I2C3_EV_IRQHandler                ; I2C3 event                                             
+        DCD     I2C3_ER_IRQHandler                ; I2C3 error                                             
+        DCD     OTG_HS_EP1_OUT_IRQHandler         ; USB OTG HS End Point 1 Out                      
+        DCD     OTG_HS_EP1_IN_IRQHandler          ; USB OTG HS End Point 1 In                       
+        DCD     OTG_HS_WKUP_IRQHandler            ; USB OTG HS Wakeup through EXTI                         
+        DCD     OTG_HS_IRQHandler                 ; USB OTG HS                                      
+        DCD     DCMI_IRQHandler                   ; DCMI                                            
+        DCD     0                                 ; Reserved                                    
+        DCD     RNG_IRQHandler                    ; Rng
+        DCD     FPU_IRQHandler                    ; FPU
+        DCD     UART7_IRQHandler                  ; UART7
+        DCD     UART8_IRQHandler                  ; UART8
+        DCD     SPI4_IRQHandler                   ; SPI4
+        DCD     SPI5_IRQHandler                   ; SPI5
+        DCD     SPI6_IRQHandler                   ; SPI6
+        DCD     SAI1_IRQHandler                   ; SAI1
+        DCD     LTDC_IRQHandler                   ; LTDC
+        DCD     LTDC_ER_IRQHandler                ; LTDC error
+        DCD     DMA2D_IRQHandler                  ; DMA2D
+        DCD     SAI2_IRQHandler                   ; SAI2
+        DCD     QUADSPI_IRQHandler                ; QUADSPI
+        DCD     LPTIM1_IRQHandler                 ; LPTIM1
+        DCD     CEC_IRQHandler                    ; HDMI_CEC
+        DCD     I2C4_EV_IRQHandler                ; I2C4 Event                                             
+        DCD     I2C4_ER_IRQHandler                ; I2C4 Error 
+        DCD     SPDIF_RX_IRQHandler               ; SPDIF_RX
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler  
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+PVD_IRQHandler  
+        B PVD_IRQHandler
+
+        PUBWEAK TAMP_STAMP_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TAMP_STAMP_IRQHandler  
+        B TAMP_STAMP_IRQHandler
+
+        PUBWEAK RTC_WKUP_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+RTC_WKUP_IRQHandler  
+        B RTC_WKUP_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler  
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_IRQHandler  
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_IRQHandler  
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI1_IRQHandler  
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_IRQHandler  
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+EXTI4_IRQHandler  
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Stream0_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream0_IRQHandler  
+        B DMA1_Stream0_IRQHandler
+
+        PUBWEAK DMA1_Stream1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream1_IRQHandler  
+        B DMA1_Stream1_IRQHandler
+
+        PUBWEAK DMA1_Stream2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream2_IRQHandler  
+        B DMA1_Stream2_IRQHandler
+
+        PUBWEAK DMA1_Stream3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream3_IRQHandler  
+        B DMA1_Stream3_IRQHandler
+
+        PUBWEAK DMA1_Stream4_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream4_IRQHandler  
+        B DMA1_Stream4_IRQHandler
+
+        PUBWEAK DMA1_Stream5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream5_IRQHandler  
+        B DMA1_Stream5_IRQHandler
+
+        PUBWEAK DMA1_Stream6_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream6_IRQHandler  
+        B DMA1_Stream6_IRQHandler
+
+        PUBWEAK ADC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+ADC_IRQHandler  
+        B ADC_IRQHandler
+
+        PUBWEAK CAN1_TX_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+CAN1_TX_IRQHandler  
+        B CAN1_TX_IRQHandler
+
+        PUBWEAK CAN1_RX0_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+CAN1_RX0_IRQHandler  
+        B CAN1_RX0_IRQHandler
+
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+CAN1_RX1_IRQHandler  
+        B CAN1_RX1_IRQHandler
+
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+CAN1_SCE_IRQHandler  
+        B CAN1_SCE_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+EXTI9_5_IRQHandler  
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_TIM9_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM1_BRK_TIM9_IRQHandler  
+        B TIM1_BRK_TIM9_IRQHandler
+
+        PUBWEAK TIM1_UP_TIM10_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM1_UP_TIM10_IRQHandler  
+        B TIM1_UP_TIM10_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM1_TRG_COM_TIM11_IRQHandler  
+        B TIM1_TRG_COM_TIM11_IRQHandler
+        
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM1_CC_IRQHandler  
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler  
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler  
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM4_IRQHandler  
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C1_EV_IRQHandler  
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C1_ER_IRQHandler  
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C2_EV_IRQHandler  
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C2_ER_IRQHandler  
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler  
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler  
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler  
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler  
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+USART3_IRQHandler  
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)   
+EXTI15_10_IRQHandler  
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)   
+RTC_Alarm_IRQHandler  
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK OTG_FS_WKUP_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+OTG_FS_WKUP_IRQHandler  
+        B OTG_FS_WKUP_IRQHandler
+      
+        PUBWEAK TIM8_BRK_TIM12_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM8_BRK_TIM12_IRQHandler  
+        B TIM8_BRK_TIM12_IRQHandler
+
+        PUBWEAK TIM8_UP_TIM13_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM8_UP_TIM13_IRQHandler  
+        B TIM8_UP_TIM13_IRQHandler
+
+        PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM8_TRG_COM_TIM14_IRQHandler  
+        B TIM8_TRG_COM_TIM14_IRQHandler
+
+        PUBWEAK TIM8_CC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+TIM8_CC_IRQHandler  
+        B TIM8_CC_IRQHandler
+
+        PUBWEAK DMA1_Stream7_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream7_IRQHandler  
+        B DMA1_Stream7_IRQHandler
+
+        PUBWEAK FMC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+FMC_IRQHandler  
+        B FMC_IRQHandler
+
+        PUBWEAK SDMMC1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SDMMC1_IRQHandler  
+        B SDMMC1_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM5_IRQHandler  
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SPI3_IRQHandler  
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+UART4_IRQHandler  
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+UART5_IRQHandler  
+        B UART5_IRQHandler
+
+        PUBWEAK TIM6_DAC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)   
+TIM6_DAC_IRQHandler  
+        B TIM6_DAC_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)   
+TIM7_IRQHandler  
+        B TIM7_IRQHandler
+
+        PUBWEAK DMA2_Stream0_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream0_IRQHandler  
+        B DMA2_Stream0_IRQHandler
+
+        PUBWEAK DMA2_Stream1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream1_IRQHandler  
+        B DMA2_Stream1_IRQHandler
+
+        PUBWEAK DMA2_Stream2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream2_IRQHandler  
+        B DMA2_Stream2_IRQHandler
+
+        PUBWEAK DMA2_Stream3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream3_IRQHandler  
+        B DMA2_Stream3_IRQHandler
+
+        PUBWEAK DMA2_Stream4_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream4_IRQHandler  
+        B DMA2_Stream4_IRQHandler
+
+        PUBWEAK ETH_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+ETH_IRQHandler  
+        B ETH_IRQHandler
+
+        PUBWEAK ETH_WKUP_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+ETH_WKUP_IRQHandler  
+        B ETH_WKUP_IRQHandler
+
+        PUBWEAK CAN2_TX_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+CAN2_TX_IRQHandler  
+        B CAN2_TX_IRQHandler
+
+        PUBWEAK CAN2_RX0_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+CAN2_RX0_IRQHandler  
+        B CAN2_RX0_IRQHandler
+
+        PUBWEAK CAN2_RX1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+CAN2_RX1_IRQHandler  
+        B CAN2_RX1_IRQHandler
+
+        PUBWEAK CAN2_SCE_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+CAN2_SCE_IRQHandler  
+        B CAN2_SCE_IRQHandler
+
+        PUBWEAK OTG_FS_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+OTG_FS_IRQHandler  
+        B OTG_FS_IRQHandler
+
+        PUBWEAK DMA2_Stream5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream5_IRQHandler  
+        B DMA2_Stream5_IRQHandler
+
+        PUBWEAK DMA2_Stream6_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream6_IRQHandler  
+        B DMA2_Stream6_IRQHandler
+
+        PUBWEAK DMA2_Stream7_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream7_IRQHandler  
+        B DMA2_Stream7_IRQHandler
+
+        PUBWEAK USART6_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+USART6_IRQHandler  
+        B USART6_IRQHandler
+
+        PUBWEAK I2C3_EV_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C3_EV_IRQHandler  
+        B I2C3_EV_IRQHandler
+
+        PUBWEAK I2C3_ER_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C3_ER_IRQHandler  
+        B I2C3_ER_IRQHandler
+
+        PUBWEAK OTG_HS_EP1_OUT_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+OTG_HS_EP1_OUT_IRQHandler  
+        B OTG_HS_EP1_OUT_IRQHandler
+
+        PUBWEAK OTG_HS_EP1_IN_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+OTG_HS_EP1_IN_IRQHandler  
+        B OTG_HS_EP1_IN_IRQHandler
+
+        PUBWEAK OTG_HS_WKUP_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+OTG_HS_WKUP_IRQHandler  
+        B OTG_HS_WKUP_IRQHandler
+
+        PUBWEAK OTG_HS_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+OTG_HS_IRQHandler  
+        B OTG_HS_IRQHandler
+
+        PUBWEAK DCMI_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+DCMI_IRQHandler  
+        B DCMI_IRQHandler
+
+        PUBWEAK RNG_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+RNG_IRQHandler  
+        B RNG_IRQHandler
+
+        PUBWEAK FPU_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+FPU_IRQHandler  
+        B FPU_IRQHandler
+
+        PUBWEAK UART7_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)      
+UART7_IRQHandler 
+        B UART7_IRQHandler  
+
+        PUBWEAK UART8_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+UART8_IRQHandler             
+        B UART8_IRQHandler
+        
+        PUBWEAK SPI4_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+SPI4_IRQHandler
+        B SPI4_IRQHandler                 
+
+        PUBWEAK SPI5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+SPI5_IRQHandler   
+        B SPI5_IRQHandler                  
+
+        PUBWEAK SPI6_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+SPI6_IRQHandler 
+        B SPI6_IRQHandler                    
+
+        PUBWEAK SAI1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+SAI1_IRQHandler  
+        B SAI1_IRQHandler                  
+
+        PUBWEAK LTDC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+LTDC_IRQHandler 
+        B LTDC_IRQHandler                     
+
+        PUBWEAK LTDC_ER_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+LTDC_ER_IRQHandler 
+        B LTDC_ER_IRQHandler                 
+
+        PUBWEAK DMA2D_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+DMA2D_IRQHandler 
+        B DMA2D_IRQHandler                  
+
+       PUBWEAK SAI2_IRQHandler
+       SECTION .text:CODE:NOROOT:REORDER(1) 
+SAI2_IRQHandler 
+        B SAI2_IRQHandler          
+
+       PUBWEAK QUADSPI_IRQHandler
+       SECTION .text:CODE:NOROOT:REORDER(1) 
+QUADSPI_IRQHandler 
+        B QUADSPI_IRQHandler       
+        
+        PUBWEAK LPTIM1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+LPTIM1_IRQHandler 
+        B LPTIM1_IRQHandler   
+        
+        PUBWEAK CEC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+CEC_IRQHandler 
+        B CEC_IRQHandler 
+
+        PUBWEAK I2C4_EV_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C4_EV_IRQHandler 
+        B I2C4_EV_IRQHandler   
+        
+        PUBWEAK I2C4_ER_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C4_ER_IRQHandler 
+        B I2C4_ER_IRQHandler 
+ 
+        PUBWEAK SPDIF_RX_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+SPDIF_RX_IRQHandler 
+        B SPDIF_RX_IRQHandler 
+        END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/TOOLCHAIN_IAR/stm32f746ng.icf	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,35 @@
+/* [ROM = 1024kb = 0x100000] */
+define symbol __intvec_start__     = 0x08000000;
+define symbol __region_ROM_start__ = 0x08000000;
+define symbol __region_ROM_end__   = 0x080FFFFF;
+
+/* [RAM = 320kb = 0x50000] Vector table dynamic copy: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM */
+define symbol __NVIC_start__          = 0x20000000;
+define symbol __NVIC_end__            = 0x200001C7; /* Aligned on 8 bytes */
+define symbol __region_RAM_start__    = 0x200001C8;
+define symbol __region_RAM_end__      = 0x2004FFFF;
+
+define symbol __region_ITCMRAM_start__ = 0x00000000;
+define symbol __region_ITCMRAM_end__   = 0x00003FFF;
+
+/* Memory regions */
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
+define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
+define region ITCMRAM_region = mem:[from __region_ITCMRAM_start__ to __region_ITCMRAM_end__];
+
+/* Stack and Heap */
+/*Heap 1/4 of ram and stack 1/8*/
+define symbol __size_cstack__ = 0x4000;
+define symbol __size_heap__   = 0x8000;
+define block CSTACK    with alignment = 8, size = __size_cstack__   { };
+define block HEAP      with alignment = 8, size = __size_heap__     { };
+define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+
+initialize by copy with packing = zeros { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite, block STACKHEAP };

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/cmsis.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,38 @@
+/* mbed Microcontroller Library
+ * A generic CMSIS include header
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_H
+#define MBED_CMSIS_H
+
+#include "stm32f7xx.h"
+#include "cmsis_nvic.h"
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/cmsis_nvic.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "cmsis_nvic.h"
+
+#define NVIC_RAM_VECTOR_ADDRESS   (0x20000000)  // Vectors positioned at start of RAM
+#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000)  // Initial vector position in flash
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) {
+    uint32_t *vectors = (uint32_t *)SCB->VTOR;
+    uint32_t i;
+
+    // Copy and switch to dynamic vectors if the first time called
+    if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) {
+        uint32_t *old_vectors = vectors;
+        vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
+        for (i=0; i<NVIC_NUM_VECTORS; i++) {
+            vectors[i] = old_vectors[i];
+        }
+        SCB->VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
+    }
+    vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+    uint32_t *vectors = (uint32_t*)SCB->VTOR;
+    return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/cmsis_nvic.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,54 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */ 
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 98 vectors = 392 bytes from 0x40 to 0x1C7
+// Total: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM
+#define NVIC_NUM_VECTORS      114
+#define NVIC_USER_IRQ_OFFSET  16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/hal_tick.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,140 @@
+/**
+  ******************************************************************************
+  * @file    hal_tick.c
+  * @author  MCD Application Team
+  * @brief   Initialization of HAL tick
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+#include "hal_tick.h"
+
+// 0=NO, 1=PG6 toggles at each tick
+#define DEBUG_TICK 0
+
+TIM_HandleTypeDef TimMasterHandle;
+uint32_t PreviousVal = 0;
+
+void HAL_IncTick(void);
+void us_ticker_irq_handler(void);
+
+void timer_irq_handler(void) {
+    // Channel 1 for mbed timeout
+    if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC1) == SET) {
+        __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
+        us_ticker_irq_handler();
+    }
+
+    // Channel 2 for HAL tick
+    if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC2) == SET) {
+        __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2);
+        uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle);
+        if ((val - PreviousVal) >= HAL_TICK_DELAY) {
+            // Increment HAL variable
+            HAL_IncTick();
+            // Prepare next interrupt
+            __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY);
+            PreviousVal = val;
+#if DEBUG_TICK > 0
+            HAL_GPIO_TogglePin(GPIOG, GPIO_PIN_6);
+#endif
+        }
+    }
+}
+
+// Reconfigure the HAL tick using a standard timer instead of systick.
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) {
+    RCC_ClkInitTypeDef RCC_ClkInitStruct;
+    uint32_t PclkFreq;
+
+    // Get clock configuration
+    // Note: PclkFreq contains here the Latency (not used after)
+    HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq);
+
+    // Get TIM5 clock value
+    PclkFreq = HAL_RCC_GetPCLK1Freq();
+
+    // Enable timer clock
+    TIM_MST_RCC;
+
+    // Reset timer
+    TIM_MST_RESET_ON;
+    TIM_MST_RESET_OFF;
+
+    // Configure time base
+    TimMasterHandle.Instance = TIM_MST;
+    TimMasterHandle.Init.Period = 0xFFFFFFFF;
+
+    // TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx
+    if (RCC_ClkInitStruct.APB1CLKDivider == RCC_HCLK_DIV1)
+      TimMasterHandle.Init.Prescaler = (uint16_t)((PclkFreq) / 1000000) - 1; // 1 us tick
+    else
+      TimMasterHandle.Init.Prescaler = (uint16_t)((PclkFreq * 2) / 1000000) - 1; // 1 us tick  
+
+    TimMasterHandle.Init.ClockDivision     = 0;
+    TimMasterHandle.Init.CounterMode       = TIM_COUNTERMODE_UP;
+    TimMasterHandle.Init.RepetitionCounter = 0;
+    HAL_TIM_OC_Init(&TimMasterHandle);
+
+    NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler);
+    NVIC_EnableIRQ(TIM_MST_IRQ);
+
+    // Channel 1 for mbed timeout
+    HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1);
+
+    // Channel 2 for HAL tick
+    HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2);
+    PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle);
+    __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY);
+    __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+
+#if DEBUG_TICK > 0
+    __GPIOG_CLK_ENABLE();
+    GPIO_InitTypeDef GPIO_InitStruct;
+    GPIO_InitStruct.Pin = GPIO_PIN_6;
+    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
+    HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
+#endif
+
+    return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/hal_tick.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,62 @@
+/**
+  ******************************************************************************
+  * @file    hal_tick.h
+  * @author  MCD Application Team
+  * @brief   Initialization of HAL tick
+  ******************************************************************************  
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */ 
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f7xx.h"
+#include "cmsis_nvic.h"
+   
+#define TIM_MST      TIM5
+#define TIM_MST_IRQ  TIM5_IRQn
+#define TIM_MST_RCC  __TIM5_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON   __TIM5_FORCE_RESET()
+#define TIM_MST_RESET_OFF  __TIM5_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/stm32f746xx.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,9479 @@
+/**
+  ******************************************************************************
+  * @file    stm32f746xx.h
+  * @author  MCD Application Team
+  * @version V1.0.2
+  * @date    21-September-2015
+  * @brief   CMSIS STM32F746xx Device Peripheral Access Layer Header File.
+  *
+  *          This file contains:
+  *           - Data structures and the address mapping for all peripherals
+  *           - Peripheral's registers declarations and bits definition
+  *           - Macros to access peripheral’s registers hardware
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS_Device
+  * @{
+  */
+
+/** @addtogroup stm32f746xx
+  * @{
+  */
+    
+#ifndef __STM32F746xx_H
+#define __STM32F746xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+  
+/** @addtogroup Configuration_section_for_CMSIS
+  * @{
+  */
+
+/**
+ * @brief STM32F7xx Interrupt Number Definition, according to the selected device 
+ *        in @ref Library_configuration_section 
+ */
+typedef enum
+{
+/******  Cortex-M7 Processor Exceptions Numbers ****************************************************************/
+  NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                                          */
+  MemoryManagement_IRQn       = -12,    /*!< 4 Cortex-M7 Memory Management Interrupt                           */
+  BusFault_IRQn               = -11,    /*!< 5 Cortex-M7 Bus Fault Interrupt                                   */
+  UsageFault_IRQn             = -10,    /*!< 6 Cortex-M7 Usage Fault Interrupt                                 */
+  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M7 SV Call Interrupt                                    */
+  DebugMonitor_IRQn           = -4,     /*!< 12 Cortex-M7 Debug Monitor Interrupt                              */
+  PendSV_IRQn                 = -2,     /*!< 14 Cortex-M7 Pend SV Interrupt                                    */
+  SysTick_IRQn                = -1,     /*!< 15 Cortex-M7 System Tick Interrupt                                */
+/******  STM32 specific Interrupt Numbers **********************************************************************/
+  WWDG_IRQn                   = 0,      /*!< Window WatchDog Interrupt                                         */
+  PVD_IRQn                    = 1,      /*!< PVD through EXTI Line detection Interrupt                         */
+  TAMP_STAMP_IRQn             = 2,      /*!< Tamper and TimeStamp interrupts through the EXTI line             */
+  RTC_WKUP_IRQn               = 3,      /*!< RTC Wakeup interrupt through the EXTI line                        */
+  FLASH_IRQn                  = 4,      /*!< FLASH global Interrupt                                            */
+  RCC_IRQn                    = 5,      /*!< RCC global Interrupt                                              */
+  EXTI0_IRQn                  = 6,      /*!< EXTI Line0 Interrupt                                              */
+  EXTI1_IRQn                  = 7,      /*!< EXTI Line1 Interrupt                                              */
+  EXTI2_IRQn                  = 8,      /*!< EXTI Line2 Interrupt                                              */
+  EXTI3_IRQn                  = 9,      /*!< EXTI Line3 Interrupt                                              */
+  EXTI4_IRQn                  = 10,     /*!< EXTI Line4 Interrupt                                              */
+  DMA1_Stream0_IRQn           = 11,     /*!< DMA1 Stream 0 global Interrupt                                    */
+  DMA1_Stream1_IRQn           = 12,     /*!< DMA1 Stream 1 global Interrupt                                    */
+  DMA1_Stream2_IRQn           = 13,     /*!< DMA1 Stream 2 global Interrupt                                    */
+  DMA1_Stream3_IRQn           = 14,     /*!< DMA1 Stream 3 global Interrupt                                    */
+  DMA1_Stream4_IRQn           = 15,     /*!< DMA1 Stream 4 global Interrupt                                    */
+  DMA1_Stream5_IRQn           = 16,     /*!< DMA1 Stream 5 global Interrupt                                    */
+  DMA1_Stream6_IRQn           = 17,     /*!< DMA1 Stream 6 global Interrupt                                    */
+  ADC_IRQn                    = 18,     /*!< ADC1, ADC2 and ADC3 global Interrupts                             */
+  CAN1_TX_IRQn                = 19,     /*!< CAN1 TX Interrupt                                                 */
+  CAN1_RX0_IRQn               = 20,     /*!< CAN1 RX0 Interrupt                                                */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                                */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                                */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                                     */
+  TIM1_BRK_TIM9_IRQn          = 24,     /*!< TIM1 Break interrupt and TIM9 global interrupt                    */
+  TIM1_UP_TIM10_IRQn          = 25,     /*!< TIM1 Update Interrupt and TIM10 global interrupt                  */
+  TIM1_TRG_COM_TIM11_IRQn     = 26,     /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                                    */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                             */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                             */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                             */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                              */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                              */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                              */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                              */  
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                             */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                             */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                                           */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                                           */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                                           */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                                   */
+  RTC_Alarm_IRQn              = 41,     /*!< RTC Alarm (A and B) through EXTI Line Interrupt                   */
+  OTG_FS_WKUP_IRQn            = 42,     /*!< USB OTG FS Wakeup through EXTI line interrupt                     */    
+  TIM8_BRK_TIM12_IRQn         = 43,     /*!< TIM8 Break Interrupt and TIM12 global interrupt                   */
+  TIM8_UP_TIM13_IRQn          = 44,     /*!< TIM8 Update Interrupt and TIM13 global interrupt                  */
+  TIM8_TRG_COM_TIM14_IRQn     = 45,     /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+  TIM8_CC_IRQn                = 46,     /*!< TIM8 Capture Compare Interrupt                                    */
+  DMA1_Stream7_IRQn           = 47,     /*!< DMA1 Stream7 Interrupt                                            */
+  FMC_IRQn                    = 48,     /*!< FMC global Interrupt                                              */
+  SDMMC1_IRQn                 = 49,     /*!< SDMMC1 global Interrupt                                           */
+  TIM5_IRQn                   = 50,     /*!< TIM5 global Interrupt                                             */
+  SPI3_IRQn                   = 51,     /*!< SPI3 global Interrupt                                             */
+  UART4_IRQn                  = 52,     /*!< UART4 global Interrupt                                            */
+  UART5_IRQn                  = 53,     /*!< UART5 global Interrupt                                            */
+  TIM6_DAC_IRQn               = 54,     /*!< TIM6 global and DAC1&2 underrun error  interrupts                 */
+  TIM7_IRQn                   = 55,     /*!< TIM7 global interrupt                                             */
+  DMA2_Stream0_IRQn           = 56,     /*!< DMA2 Stream 0 global Interrupt                                    */
+  DMA2_Stream1_IRQn           = 57,     /*!< DMA2 Stream 1 global Interrupt                                    */
+  DMA2_Stream2_IRQn           = 58,     /*!< DMA2 Stream 2 global Interrupt                                    */
+  DMA2_Stream3_IRQn           = 59,     /*!< DMA2 Stream 3 global Interrupt                                    */
+  DMA2_Stream4_IRQn           = 60,     /*!< DMA2 Stream 4 global Interrupt                                    */
+  ETH_IRQn                    = 61,     /*!< Ethernet global Interrupt                                         */
+  ETH_WKUP_IRQn               = 62,     /*!< Ethernet Wakeup through EXTI line Interrupt                       */
+  CAN2_TX_IRQn                = 63,     /*!< CAN2 TX Interrupt                                                 */
+  CAN2_RX0_IRQn               = 64,     /*!< CAN2 RX0 Interrupt                                                */
+  CAN2_RX1_IRQn               = 65,     /*!< CAN2 RX1 Interrupt                                                */
+  CAN2_SCE_IRQn               = 66,     /*!< CAN2 SCE Interrupt                                                */
+  OTG_FS_IRQn                 = 67,     /*!< USB OTG FS global Interrupt                                       */
+  DMA2_Stream5_IRQn           = 68,     /*!< DMA2 Stream 5 global interrupt                                    */
+  DMA2_Stream6_IRQn           = 69,     /*!< DMA2 Stream 6 global interrupt                                    */
+  DMA2_Stream7_IRQn           = 70,     /*!< DMA2 Stream 7 global interrupt                                    */
+  USART6_IRQn                 = 71,     /*!< USART6 global interrupt                                           */
+  I2C3_EV_IRQn                = 72,     /*!< I2C3 event interrupt                                              */
+  I2C3_ER_IRQn                = 73,     /*!< I2C3 error interrupt                                              */
+  OTG_HS_EP1_OUT_IRQn         = 74,     /*!< USB OTG HS End Point 1 Out global interrupt                       */
+  OTG_HS_EP1_IN_IRQn          = 75,     /*!< USB OTG HS End Point 1 In global interrupt                        */
+  OTG_HS_WKUP_IRQn            = 76,     /*!< USB OTG HS Wakeup through EXTI interrupt                          */
+  OTG_HS_IRQn                 = 77,     /*!< USB OTG HS global interrupt                                       */
+  DCMI_IRQn                   = 78,     /*!< DCMI global interrupt                                             */
+  RNG_IRQn                    = 80,     /*!< RNG global interrupt                                              */
+  FPU_IRQn                    = 81,     /*!< FPU global interrupt                                              */
+  UART7_IRQn                  = 82,     /*!< UART7 global interrupt                                            */
+  UART8_IRQn                  = 83,     /*!< UART8 global interrupt                                            */
+  SPI4_IRQn                   = 84,     /*!< SPI4 global Interrupt                                             */
+  SPI5_IRQn                   = 85,     /*!< SPI5 global Interrupt                                             */
+  SPI6_IRQn                   = 86,     /*!< SPI6 global Interrupt                                             */
+  SAI1_IRQn                   = 87,     /*!< SAI1 global Interrupt                                             */
+  LTDC_IRQn                   = 88,     /*!< LTDC global Interrupt                                             */
+  LTDC_ER_IRQn                = 89,     /*!< LTDC Error global Interrupt                                       */
+  DMA2D_IRQn                  = 90,     /*!< DMA2D global Interrupt                                            */
+  SAI2_IRQn                   = 91,     /*!< SAI2 global Interrupt                                             */
+  QUADSPI_IRQn                = 92,     /*!< Quad SPI global interrupt                                         */
+  LPTIM1_IRQn                 = 93,     /*!< LP TIM1 interrupt                                                 */
+  CEC_IRQn                    = 94,     /*!< HDMI-CEC global Interrupt                                         */
+  I2C4_EV_IRQn                = 95,     /*!< I2C4 Event Interrupt                                              */
+  I2C4_ER_IRQn                = 96,     /*!< I2C4 Error Interrupt                                              */
+  SPDIF_RX_IRQn               = 97      /*!< SPDIF-RX global Interrupt                                         */  
+} IRQn_Type;
+
+/**
+  * @}
+  */
+
+/**
+ * @brief Configuration of the Cortex-M7 Processor and Core Peripherals 
+ */
+#define __CM7_REV                 0x0001  /*!< Cortex-M7 revision r0p1                       */
+#define __MPU_PRESENT             1       /*!< CM7 provides an MPU                           */
+#define __NVIC_PRIO_BITS          4       /*!< CM7 uses 4 Bits for the Priority Levels       */
+#define __Vendor_SysTickConfig    0       /*!< Set to 1 if different SysTick Config is used  */
+#define __FPU_PRESENT             1       /*!< FPU present                                   */
+#define __ICACHE_PRESENT          1       /*!< CM7 instruction cache present                 */
+#define __DCACHE_PRESENT          1       /*!< CM7 data cache present                        */
+#include "core_cm7.h"                     /*!< Cortex-M7 processor and core peripherals      */
+  
+  
+#include "system_stm32f7xx.h"
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+  * @{
+  */   
+
+/** 
+  * @brief Analog to Digital Converter  
+  */
+
+typedef struct
+{
+  __IO uint32_t SR;     /*!< ADC status register,                         Address offset: 0x00 */
+  __IO uint32_t CR1;    /*!< ADC control register 1,                      Address offset: 0x04 */      
+  __IO uint32_t CR2;    /*!< ADC control register 2,                      Address offset: 0x08 */
+  __IO uint32_t SMPR1;  /*!< ADC sample time register 1,                  Address offset: 0x0C */
+  __IO uint32_t SMPR2;  /*!< ADC sample time register 2,                  Address offset: 0x10 */
+  __IO uint32_t JOFR1;  /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+  __IO uint32_t JOFR2;  /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+  __IO uint32_t JOFR3;  /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+  __IO uint32_t JOFR4;  /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+  __IO uint32_t HTR;    /*!< ADC watchdog higher threshold register,      Address offset: 0x24 */
+  __IO uint32_t LTR;    /*!< ADC watchdog lower threshold register,       Address offset: 0x28 */
+  __IO uint32_t SQR1;   /*!< ADC regular sequence register 1,             Address offset: 0x2C */
+  __IO uint32_t SQR2;   /*!< ADC regular sequence register 2,             Address offset: 0x30 */
+  __IO uint32_t SQR3;   /*!< ADC regular sequence register 3,             Address offset: 0x34 */
+  __IO uint32_t JSQR;   /*!< ADC injected sequence register,              Address offset: 0x38*/
+  __IO uint32_t JDR1;   /*!< ADC injected data register 1,                Address offset: 0x3C */
+  __IO uint32_t JDR2;   /*!< ADC injected data register 2,                Address offset: 0x40 */
+  __IO uint32_t JDR3;   /*!< ADC injected data register 3,                Address offset: 0x44 */
+  __IO uint32_t JDR4;   /*!< ADC injected data register 4,                Address offset: 0x48 */
+  __IO uint32_t DR;     /*!< ADC regular data register,                   Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t CSR;    /*!< ADC Common status register,                  Address offset: ADC1 base address + 0x300 */
+  __IO uint32_t CCR;    /*!< ADC common control register,                 Address offset: ADC1 base address + 0x304 */
+  __IO uint32_t CDR;    /*!< ADC common regular data register for dual
+                             AND triple modes,                            Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+
+/** 
+  * @brief Controller Area Network TxMailBox 
+  */
+
+typedef struct
+{
+  __IO uint32_t TIR;  /*!< CAN TX mailbox identifier register */
+  __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+  __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+  __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/** 
+  * @brief Controller Area Network FIFOMailBox 
+  */
+  
+typedef struct
+{
+  __IO uint32_t RIR;  /*!< CAN receive FIFO mailbox identifier register */
+  __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+  __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+  __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/** 
+  * @brief Controller Area Network FilterRegister 
+  */
+  
+typedef struct
+{
+  __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+  __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/** 
+  * @brief Controller Area Network 
+  */
+  
+typedef struct
+{
+  __IO uint32_t              MCR;                 /*!< CAN master control register,         Address offset: 0x00          */
+  __IO uint32_t              MSR;                 /*!< CAN master status register,          Address offset: 0x04          */
+  __IO uint32_t              TSR;                 /*!< CAN transmit status register,        Address offset: 0x08          */
+  __IO uint32_t              RF0R;                /*!< CAN receive FIFO 0 register,         Address offset: 0x0C          */
+  __IO uint32_t              RF1R;                /*!< CAN receive FIFO 1 register,         Address offset: 0x10          */
+  __IO uint32_t              IER;                 /*!< CAN interrupt enable register,       Address offset: 0x14          */
+  __IO uint32_t              ESR;                 /*!< CAN error status register,           Address offset: 0x18          */
+  __IO uint32_t              BTR;                 /*!< CAN bit timing register,             Address offset: 0x1C          */
+  uint32_t                   RESERVED0[88];       /*!< Reserved, 0x020 - 0x17F                                            */
+  CAN_TxMailBox_TypeDef      sTxMailBox[3];       /*!< CAN Tx MailBox,                      Address offset: 0x180 - 0x1AC */
+  CAN_FIFOMailBox_TypeDef    sFIFOMailBox[2];     /*!< CAN FIFO MailBox,                    Address offset: 0x1B0 - 0x1CC */
+  uint32_t                   RESERVED1[12];       /*!< Reserved, 0x1D0 - 0x1FF                                            */
+  __IO uint32_t              FMR;                 /*!< CAN filter master register,          Address offset: 0x200         */
+  __IO uint32_t              FM1R;                /*!< CAN filter mode register,            Address offset: 0x204         */
+  uint32_t                   RESERVED2;           /*!< Reserved, 0x208                                                    */
+  __IO uint32_t              FS1R;                /*!< CAN filter scale register,           Address offset: 0x20C         */
+  uint32_t                   RESERVED3;           /*!< Reserved, 0x210                                                    */
+  __IO uint32_t              FFA1R;               /*!< CAN filter FIFO assignment register, Address offset: 0x214         */
+  uint32_t                   RESERVED4;           /*!< Reserved, 0x218                                                    */
+  __IO uint32_t              FA1R;                /*!< CAN filter activation register,      Address offset: 0x21C         */
+  uint32_t                   RESERVED5[8];        /*!< Reserved, 0x220-0x23F                                              */ 
+  CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register,                 Address offset: 0x240-0x31C   */
+} CAN_TypeDef;
+
+/** 
+  * @brief HDMI-CEC 
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;           /*!< CEC control register,                                       Address offset:0x00 */
+  __IO uint32_t CFGR;         /*!< CEC configuration register,                                 Address offset:0x04 */
+  __IO uint32_t TXDR;         /*!< CEC Tx data register ,                                      Address offset:0x08 */
+  __IO uint32_t RXDR;         /*!< CEC Rx Data Register,                                       Address offset:0x0C */
+  __IO uint32_t ISR;          /*!< CEC Interrupt and Status Register,                          Address offset:0x10 */
+  __IO uint32_t IER;          /*!< CEC interrupt enable register,                              Address offset:0x14 */
+}CEC_TypeDef;
+
+
+/** 
+  * @brief CRC calculation unit 
+  */
+
+typedef struct
+{
+  __IO uint32_t  DR;          /*!< CRC Data register,                           Address offset: 0x00 */
+  __IO uint8_t   IDR;         /*!< CRC Independent data register,               Address offset: 0x04 */
+  uint8_t        RESERVED0;   /*!< Reserved, 0x05                                                    */
+  uint16_t       RESERVED1;   /*!< Reserved, 0x06                                                    */
+  __IO uint32_t  CR;          /*!< CRC Control register,                        Address offset: 0x08 */
+  uint32_t       RESERVED2;   /*!< Reserved,                                                    0x0C */
+  __IO uint32_t  INIT;        /*!< Initial CRC value register,                  Address offset: 0x10 */
+  __IO uint32_t  POL;         /*!< CRC polynomial register,                     Address offset: 0x14 */
+} CRC_TypeDef;
+
+/** 
+  * @brief Digital to Analog Converter
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;       /*!< DAC control register,                                    Address offset: 0x00 */
+  __IO uint32_t SWTRIGR;  /*!< DAC software trigger register,                           Address offset: 0x04 */
+  __IO uint32_t DHR12R1;  /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+  __IO uint32_t DHR12L1;  /*!< DAC channel1 12-bit left aligned data holding register,  Address offset: 0x0C */
+  __IO uint32_t DHR8R1;   /*!< DAC channel1 8-bit right aligned data holding register,  Address offset: 0x10 */
+  __IO uint32_t DHR12R2;  /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+  __IO uint32_t DHR12L2;  /*!< DAC channel2 12-bit left aligned data holding register,  Address offset: 0x18 */
+  __IO uint32_t DHR8R2;   /*!< DAC channel2 8-bit right-aligned data holding register,  Address offset: 0x1C */
+  __IO uint32_t DHR12RD;  /*!< Dual DAC 12-bit right-aligned data holding register,     Address offset: 0x20 */
+  __IO uint32_t DHR12LD;  /*!< DUAL DAC 12-bit left aligned data holding register,      Address offset: 0x24 */
+  __IO uint32_t DHR8RD;   /*!< DUAL DAC 8-bit right aligned data holding register,      Address offset: 0x28 */
+  __IO uint32_t DOR1;     /*!< DAC channel1 data output register,                       Address offset: 0x2C */
+  __IO uint32_t DOR2;     /*!< DAC channel2 data output register,                       Address offset: 0x30 */
+  __IO uint32_t SR;       /*!< DAC status register,                                     Address offset: 0x34 */
+} DAC_TypeDef;
+
+
+/** 
+  * @brief Debug MCU
+  */
+
+typedef struct
+{
+  __IO uint32_t IDCODE;  /*!< MCU device ID code,               Address offset: 0x00 */
+  __IO uint32_t CR;      /*!< Debug MCU configuration register, Address offset: 0x04 */
+  __IO uint32_t APB1FZ;  /*!< Debug MCU APB1 freeze register,   Address offset: 0x08 */
+  __IO uint32_t APB2FZ;  /*!< Debug MCU APB2 freeze register,   Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/** 
+  * @brief DCMI
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;       /*!< DCMI control register 1,                       Address offset: 0x00 */
+  __IO uint32_t SR;       /*!< DCMI status register,                          Address offset: 0x04 */
+  __IO uint32_t RISR;     /*!< DCMI raw interrupt status register,            Address offset: 0x08 */
+  __IO uint32_t IER;      /*!< DCMI interrupt enable register,                Address offset: 0x0C */
+  __IO uint32_t MISR;     /*!< DCMI masked interrupt status register,         Address offset: 0x10 */
+  __IO uint32_t ICR;      /*!< DCMI interrupt clear register,                 Address offset: 0x14 */
+  __IO uint32_t ESCR;     /*!< DCMI embedded synchronization code register,   Address offset: 0x18 */
+  __IO uint32_t ESUR;     /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */
+  __IO uint32_t CWSTRTR;  /*!< DCMI crop window start,                        Address offset: 0x20 */
+  __IO uint32_t CWSIZER;  /*!< DCMI crop window size,                         Address offset: 0x24 */
+  __IO uint32_t DR;       /*!< DCMI data register,                            Address offset: 0x28 */
+} DCMI_TypeDef;
+
+/** 
+  * @brief DMA Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;     /*!< DMA stream x configuration register      */
+  __IO uint32_t NDTR;   /*!< DMA stream x number of data register     */
+  __IO uint32_t PAR;    /*!< DMA stream x peripheral address register */
+  __IO uint32_t M0AR;   /*!< DMA stream x memory 0 address register   */
+  __IO uint32_t M1AR;   /*!< DMA stream x memory 1 address register   */
+  __IO uint32_t FCR;    /*!< DMA stream x FIFO control register       */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t LISR;   /*!< DMA low interrupt status register,      Address offset: 0x00 */
+  __IO uint32_t HISR;   /*!< DMA high interrupt status register,     Address offset: 0x04 */
+  __IO uint32_t LIFCR;  /*!< DMA low interrupt flag clear register,  Address offset: 0x08 */
+  __IO uint32_t HIFCR;  /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/** 
+  * @brief DMA2D Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;            /*!< DMA2D Control Register,                         Address offset: 0x00 */
+  __IO uint32_t ISR;           /*!< DMA2D Interrupt Status Register,                Address offset: 0x04 */
+  __IO uint32_t IFCR;          /*!< DMA2D Interrupt Flag Clear Register,            Address offset: 0x08 */
+  __IO uint32_t FGMAR;         /*!< DMA2D Foreground Memory Address Register,       Address offset: 0x0C */
+  __IO uint32_t FGOR;          /*!< DMA2D Foreground Offset Register,               Address offset: 0x10 */
+  __IO uint32_t BGMAR;         /*!< DMA2D Background Memory Address Register,       Address offset: 0x14 */
+  __IO uint32_t BGOR;          /*!< DMA2D Background Offset Register,               Address offset: 0x18 */
+  __IO uint32_t FGPFCCR;       /*!< DMA2D Foreground PFC Control Register,          Address offset: 0x1C */
+  __IO uint32_t FGCOLR;        /*!< DMA2D Foreground Color Register,                Address offset: 0x20 */
+  __IO uint32_t BGPFCCR;       /*!< DMA2D Background PFC Control Register,          Address offset: 0x24 */
+  __IO uint32_t BGCOLR;        /*!< DMA2D Background Color Register,                Address offset: 0x28 */
+  __IO uint32_t FGCMAR;        /*!< DMA2D Foreground CLUT Memory Address Register,  Address offset: 0x2C */
+  __IO uint32_t BGCMAR;        /*!< DMA2D Background CLUT Memory Address Register,  Address offset: 0x30 */
+  __IO uint32_t OPFCCR;        /*!< DMA2D Output PFC Control Register,              Address offset: 0x34 */
+  __IO uint32_t OCOLR;         /*!< DMA2D Output Color Register,                    Address offset: 0x38 */
+  __IO uint32_t OMAR;          /*!< DMA2D Output Memory Address Register,           Address offset: 0x3C */
+  __IO uint32_t OOR;           /*!< DMA2D Output Offset Register,                   Address offset: 0x40 */
+  __IO uint32_t NLR;           /*!< DMA2D Number of Line Register,                  Address offset: 0x44 */
+  __IO uint32_t LWR;           /*!< DMA2D Line Watermark Register,                  Address offset: 0x48 */
+  __IO uint32_t AMTCR;         /*!< DMA2D AHB Master Timer Configuration Register,  Address offset: 0x4C */
+  uint32_t      RESERVED[236]; /*!< Reserved, 0x50-0x3FF */
+  __IO uint32_t FGCLUT[256];   /*!< DMA2D Foreground CLUT,                          Address offset:400-7FF */
+  __IO uint32_t BGCLUT[256];   /*!< DMA2D Background CLUT,                          Address offset:800-BFF */
+} DMA2D_TypeDef;
+
+
+/** 
+  * @brief Ethernet MAC
+  */
+
+typedef struct
+{
+  __IO uint32_t MACCR;
+  __IO uint32_t MACFFR;
+  __IO uint32_t MACHTHR;
+  __IO uint32_t MACHTLR;
+  __IO uint32_t MACMIIAR;
+  __IO uint32_t MACMIIDR;
+  __IO uint32_t MACFCR;
+  __IO uint32_t MACVLANTR;             /*    8 */
+  uint32_t      RESERVED0[2];
+  __IO uint32_t MACRWUFFR;             /*   11 */
+  __IO uint32_t MACPMTCSR;
+  uint32_t      RESERVED1[2];
+  __IO uint32_t MACSR;                 /*   15 */
+  __IO uint32_t MACIMR;
+  __IO uint32_t MACA0HR;
+  __IO uint32_t MACA0LR;
+  __IO uint32_t MACA1HR;
+  __IO uint32_t MACA1LR;
+  __IO uint32_t MACA2HR;
+  __IO uint32_t MACA2LR;
+  __IO uint32_t MACA3HR;
+  __IO uint32_t MACA3LR;               /*   24 */
+  uint32_t      RESERVED2[40];
+  __IO uint32_t MMCCR;                 /*   65 */
+  __IO uint32_t MMCRIR;
+  __IO uint32_t MMCTIR;
+  __IO uint32_t MMCRIMR;
+  __IO uint32_t MMCTIMR;               /*   69 */
+  uint32_t      RESERVED3[14];
+  __IO uint32_t MMCTGFSCCR;            /*   84 */
+  __IO uint32_t MMCTGFMSCCR;
+  uint32_t      RESERVED4[5];
+  __IO uint32_t MMCTGFCR;
+  uint32_t      RESERVED5[10];
+  __IO uint32_t MMCRFCECR;
+  __IO uint32_t MMCRFAECR;
+  uint32_t      RESERVED6[10];
+  __IO uint32_t MMCRGUFCR;
+  uint32_t      RESERVED7[334];
+  __IO uint32_t PTPTSCR;
+  __IO uint32_t PTPSSIR;
+  __IO uint32_t PTPTSHR;
+  __IO uint32_t PTPTSLR;
+  __IO uint32_t PTPTSHUR;
+  __IO uint32_t PTPTSLUR;
+  __IO uint32_t PTPTSAR;
+  __IO uint32_t PTPTTHR;
+  __IO uint32_t PTPTTLR;
+  __IO uint32_t RESERVED8;
+  __IO uint32_t PTPTSSR;
+  uint32_t      RESERVED9[565];
+  __IO uint32_t DMABMR;
+  __IO uint32_t DMATPDR;
+  __IO uint32_t DMARPDR;
+  __IO uint32_t DMARDLAR;
+  __IO uint32_t DMATDLAR;
+  __IO uint32_t DMASR;
+  __IO uint32_t DMAOMR;
+  __IO uint32_t DMAIER;
+  __IO uint32_t DMAMFBOCR;
+  __IO uint32_t DMARSWTR;
+  uint32_t      RESERVED10[8];
+  __IO uint32_t DMACHTDR;
+  __IO uint32_t DMACHRDR;
+  __IO uint32_t DMACHTBAR;
+  __IO uint32_t DMACHRBAR;
+} ETH_TypeDef;
+
+/** 
+  * @brief External Interrupt/Event Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t IMR;    /*!< EXTI Interrupt mask register,            Address offset: 0x00 */
+  __IO uint32_t EMR;    /*!< EXTI Event mask register,                Address offset: 0x04 */
+  __IO uint32_t RTSR;   /*!< EXTI Rising trigger selection register,  Address offset: 0x08 */
+  __IO uint32_t FTSR;   /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+  __IO uint32_t SWIER;  /*!< EXTI Software interrupt event register,  Address offset: 0x10 */
+  __IO uint32_t PR;     /*!< EXTI Pending register,                   Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/** 
+  * @brief FLASH Registers
+  */
+
+typedef struct
+{
+  __IO uint32_t ACR;      /*!< FLASH access control register,     Address offset: 0x00 */
+  __IO uint32_t KEYR;     /*!< FLASH key register,                Address offset: 0x04 */
+  __IO uint32_t OPTKEYR;  /*!< FLASH option key register,         Address offset: 0x08 */
+  __IO uint32_t SR;       /*!< FLASH status register,             Address offset: 0x0C */
+  __IO uint32_t CR;       /*!< FLASH control register,            Address offset: 0x10 */
+  __IO uint32_t OPTCR;    /*!< FLASH option control register ,    Address offset: 0x14 */
+  __IO uint32_t OPTCR1;   /*!< FLASH option control register 1 ,  Address offset: 0x18 */
+} FLASH_TypeDef;
+
+
+
+/** 
+  * @brief Flexible Memory Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t BTCR[8];    /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */   
+} FMC_Bank1_TypeDef; 
+
+/** 
+  * @brief Flexible Memory Controller Bank1E
+  */
+  
+typedef struct
+{
+  __IO uint32_t BWTR[7];    /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FMC_Bank1E_TypeDef;
+
+/** 
+  * @brief Flexible Memory Controller Bank3
+  */
+  
+typedef struct
+{
+  __IO uint32_t PCR;        /*!< NAND Flash control register,                       Address offset: 0x80 */
+  __IO uint32_t SR;         /*!< NAND Flash FIFO status and interrupt register,     Address offset: 0x84 */
+  __IO uint32_t PMEM;       /*!< NAND Flash Common memory space timing register,    Address offset: 0x88 */
+  __IO uint32_t PATT;       /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */
+  uint32_t      RESERVED0;  /*!< Reserved, 0x90                                                          */
+  __IO uint32_t ECCR;       /*!< NAND Flash ECC result registers,                   Address offset: 0x94 */
+} FMC_Bank3_TypeDef;
+ 
+/** 
+  * @brief Flexible Memory Controller Bank5_6
+  */
+  
+typedef struct
+{
+  __IO uint32_t SDCR[2];        /*!< SDRAM Control registers ,      Address offset: 0x140-0x144  */
+  __IO uint32_t SDTR[2];        /*!< SDRAM Timing registers ,       Address offset: 0x148-0x14C  */
+  __IO uint32_t SDCMR;       /*!< SDRAM Command Mode register,    Address offset: 0x150  */
+  __IO uint32_t SDRTR;       /*!< SDRAM Refresh Timer register,   Address offset: 0x154  */
+  __IO uint32_t SDSR;        /*!< SDRAM Status register,          Address offset: 0x158  */
+} FMC_Bank5_6_TypeDef; 
+
+
+/** 
+  * @brief General Purpose I/O
+  */
+
+typedef struct
+{
+  __IO uint32_t MODER;    /*!< GPIO port mode register,               Address offset: 0x00      */
+  __IO uint32_t OTYPER;   /*!< GPIO port output type register,        Address offset: 0x04      */
+  __IO uint32_t OSPEEDR;  /*!< GPIO port output speed register,       Address offset: 0x08      */
+  __IO uint32_t PUPDR;    /*!< GPIO port pull-up/pull-down register,  Address offset: 0x0C      */
+  __IO uint32_t IDR;      /*!< GPIO port input data register,         Address offset: 0x10      */
+  __IO uint32_t ODR;      /*!< GPIO port output data register,        Address offset: 0x14      */
+  __IO uint32_t BSRR;     /*!< GPIO port bit set/reset register,      Address offset: 0x18      */
+  __IO uint32_t LCKR;     /*!< GPIO port configuration lock register, Address offset: 0x1C      */
+  __IO uint32_t AFR[2];   /*!< GPIO alternate function registers,     Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/** 
+  * @brief System configuration controller
+  */
+  
+typedef struct
+{
+  __IO uint32_t MEMRMP;       /*!< SYSCFG memory remap register,                      Address offset: 0x00      */
+  __IO uint32_t PMC;          /*!< SYSCFG peripheral mode configuration register,     Address offset: 0x04      */
+  __IO uint32_t EXTICR[4];    /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+  uint32_t      RESERVED[2];  /*!< Reserved, 0x18-0x1C                                                          */ 
+  __IO uint32_t CMPCR;        /*!< SYSCFG Compensation cell control register,         Address offset: 0x20      */
+} SYSCFG_TypeDef;
+
+/** 
+  * @brief Inter-integrated Circuit Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t CR1;      /*!< I2C Control register 1,            Address offset: 0x00 */
+  __IO uint32_t CR2;      /*!< I2C Control register 2,            Address offset: 0x04 */  
+  __IO uint32_t OAR1;     /*!< I2C Own address 1 register,        Address offset: 0x08 */
+  __IO uint32_t OAR2;     /*!< I2C Own address 2 register,        Address offset: 0x0C */
+  __IO uint32_t TIMINGR;  /*!< I2C Timing register,               Address offset: 0x10 */
+  __IO uint32_t TIMEOUTR; /*!< I2C Timeout register,              Address offset: 0x14 */
+  __IO uint32_t ISR;      /*!< I2C Interrupt and status register, Address offset: 0x18 */
+  __IO uint32_t ICR;      /*!< I2C Interrupt clear register,      Address offset: 0x1C */
+  __IO uint32_t PECR;     /*!< I2C PEC register,                  Address offset: 0x20 */
+  __IO uint32_t RXDR;     /*!< I2C Receive data register,         Address offset: 0x24 */
+  __IO uint32_t TXDR;     /*!< I2C Transmit data register,        Address offset: 0x28 */  
+} I2C_TypeDef;
+
+/** 
+  * @brief Independent WATCHDOG
+  */
+
+typedef struct
+{
+  __IO uint32_t KR;   /*!< IWDG Key register,       Address offset: 0x00 */
+  __IO uint32_t PR;   /*!< IWDG Prescaler register, Address offset: 0x04 */
+  __IO uint32_t RLR;  /*!< IWDG Reload register,    Address offset: 0x08 */
+  __IO uint32_t SR;   /*!< IWDG Status register,    Address offset: 0x0C */
+  __IO uint32_t WINR; /*!< IWDG Window register,    Address offset: 0x10 */
+} IWDG_TypeDef;
+
+
+/** 
+  * @brief LCD-TFT Display Controller
+  */
+  
+typedef struct
+{
+  uint32_t      RESERVED0[2];  /*!< Reserved, 0x00-0x04 */
+  __IO uint32_t SSCR;          /*!< LTDC Synchronization Size Configuration Register,    Address offset: 0x08 */
+  __IO uint32_t BPCR;          /*!< LTDC Back Porch Configuration Register,              Address offset: 0x0C */
+  __IO uint32_t AWCR;          /*!< LTDC Active Width Configuration Register,            Address offset: 0x10 */
+  __IO uint32_t TWCR;          /*!< LTDC Total Width Configuration Register,             Address offset: 0x14 */
+  __IO uint32_t GCR;           /*!< LTDC Global Control Register,                        Address offset: 0x18 */
+  uint32_t      RESERVED1[2];  /*!< Reserved, 0x1C-0x20 */
+  __IO uint32_t SRCR;          /*!< LTDC Shadow Reload Configuration Register,           Address offset: 0x24 */
+  uint32_t      RESERVED2[1];  /*!< Reserved, 0x28 */
+  __IO uint32_t BCCR;          /*!< LTDC Background Color Configuration Register,        Address offset: 0x2C */
+  uint32_t      RESERVED3[1];  /*!< Reserved, 0x30 */
+  __IO uint32_t IER;           /*!< LTDC Interrupt Enable Register,                      Address offset: 0x34 */
+  __IO uint32_t ISR;           /*!< LTDC Interrupt Status Register,                      Address offset: 0x38 */
+  __IO uint32_t ICR;           /*!< LTDC Interrupt Clear Register,                       Address offset: 0x3C */
+  __IO uint32_t LIPCR;         /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */
+  __IO uint32_t CPSR;          /*!< LTDC Current Position Status Register,               Address offset: 0x44 */
+  __IO uint32_t CDSR;         /*!< LTDC Current Display Status Register,                 Address offset: 0x48 */
+} LTDC_TypeDef;  
+
+/** 
+  * @brief LCD-TFT Display layer x Controller
+  */
+  
+typedef struct
+{  
+  __IO uint32_t CR;            /*!< LTDC Layerx Control Register                                  Address offset: 0x84 */
+  __IO uint32_t WHPCR;         /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */
+  __IO uint32_t WVPCR;         /*!< LTDC Layerx Window Vertical Position Configuration Register   Address offset: 0x8C */
+  __IO uint32_t CKCR;          /*!< LTDC Layerx Color Keying Configuration Register               Address offset: 0x90 */
+  __IO uint32_t PFCR;          /*!< LTDC Layerx Pixel Format Configuration Register               Address offset: 0x94 */
+  __IO uint32_t CACR;          /*!< LTDC Layerx Constant Alpha Configuration Register             Address offset: 0x98 */
+  __IO uint32_t DCCR;          /*!< LTDC Layerx Default Color Configuration Register              Address offset: 0x9C */
+  __IO uint32_t BFCR;          /*!< LTDC Layerx Blending Factors Configuration Register           Address offset: 0xA0 */
+  uint32_t      RESERVED0[2];  /*!< Reserved */
+  __IO uint32_t CFBAR;         /*!< LTDC Layerx Color Frame Buffer Address Register               Address offset: 0xAC */
+  __IO uint32_t CFBLR;         /*!< LTDC Layerx Color Frame Buffer Length Register                Address offset: 0xB0 */
+  __IO uint32_t CFBLNR;        /*!< LTDC Layerx ColorFrame Buffer Line Number Register            Address offset: 0xB4 */
+  uint32_t      RESERVED1[3];  /*!< Reserved */
+  __IO uint32_t CLUTWR;        /*!< LTDC Layerx CLUT Write Register                               Address offset: 0x144 */
+
+} LTDC_Layer_TypeDef;
+
+/** 
+  * @brief Power Control
+  */
+
+typedef struct
+{
+  __IO uint32_t CR1;   /*!< PWR power control register 1,        Address offset: 0x00 */
+  __IO uint32_t CSR1;  /*!< PWR power control/status register 2, Address offset: 0x04 */
+  __IO uint32_t CR2;   /*!< PWR power control register 2,        Address offset: 0x08 */
+  __IO uint32_t CSR2;  /*!< PWR power control/status register 2, Address offset: 0x0C */
+} PWR_TypeDef;
+
+
+/** 
+  * @brief Reset and Clock Control
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;            /*!< RCC clock control register,                                  Address offset: 0x00 */
+  __IO uint32_t PLLCFGR;       /*!< RCC PLL configuration register,                              Address offset: 0x04 */
+  __IO uint32_t CFGR;          /*!< RCC clock configuration register,                            Address offset: 0x08 */
+  __IO uint32_t CIR;           /*!< RCC clock interrupt register,                                Address offset: 0x0C */
+  __IO uint32_t AHB1RSTR;      /*!< RCC AHB1 peripheral reset register,                          Address offset: 0x10 */
+  __IO uint32_t AHB2RSTR;      /*!< RCC AHB2 peripheral reset register,                          Address offset: 0x14 */
+  __IO uint32_t AHB3RSTR;      /*!< RCC AHB3 peripheral reset register,                          Address offset: 0x18 */
+  uint32_t      RESERVED0;     /*!< Reserved, 0x1C                                                                    */
+  __IO uint32_t APB1RSTR;      /*!< RCC APB1 peripheral reset register,                          Address offset: 0x20 */
+  __IO uint32_t APB2RSTR;      /*!< RCC APB2 peripheral reset register,                          Address offset: 0x24 */
+  uint32_t      RESERVED1[2];  /*!< Reserved, 0x28-0x2C                                                               */
+  __IO uint32_t AHB1ENR;       /*!< RCC AHB1 peripheral clock register,                          Address offset: 0x30 */
+  __IO uint32_t AHB2ENR;       /*!< RCC AHB2 peripheral clock register,                          Address offset: 0x34 */
+  __IO uint32_t AHB3ENR;       /*!< RCC AHB3 peripheral clock register,                          Address offset: 0x38 */
+  uint32_t      RESERVED2;     /*!< Reserved, 0x3C                                                                    */
+  __IO uint32_t APB1ENR;       /*!< RCC APB1 peripheral clock enable register,                   Address offset: 0x40 */
+  __IO uint32_t APB2ENR;       /*!< RCC APB2 peripheral clock enable register,                   Address offset: 0x44 */
+  uint32_t      RESERVED3[2];  /*!< Reserved, 0x48-0x4C                                                               */
+  __IO uint32_t AHB1LPENR;     /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+  __IO uint32_t AHB2LPENR;     /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+  __IO uint32_t AHB3LPENR;     /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+  uint32_t      RESERVED4;     /*!< Reserved, 0x5C                                                                    */
+  __IO uint32_t APB1LPENR;     /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+  __IO uint32_t APB2LPENR;     /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+  uint32_t      RESERVED5[2];  /*!< Reserved, 0x68-0x6C                                                               */
+  __IO uint32_t BDCR;          /*!< RCC Backup domain control register,                          Address offset: 0x70 */
+  __IO uint32_t CSR;           /*!< RCC clock control & status register,                         Address offset: 0x74 */
+  uint32_t      RESERVED6[2];  /*!< Reserved, 0x78-0x7C                                                               */
+  __IO uint32_t SSCGR;         /*!< RCC spread spectrum clock generation register,               Address offset: 0x80 */
+  __IO uint32_t PLLI2SCFGR;    /*!< RCC PLLI2S configuration register,                           Address offset: 0x84 */
+  __IO uint32_t PLLSAICFGR;    /*!< RCC PLLSAI configuration register,                           Address offset: 0x88 */
+  __IO uint32_t DCKCFGR1;      /*!< RCC Dedicated Clocks configuration register1,                 Address offset: 0x8C */
+  __IO uint32_t DCKCFGR2;      /*!< RCC Dedicated Clocks configuration register 2,               Address offset: 0x90 */
+
+} RCC_TypeDef;
+
+/** 
+  * @brief Real-Time Clock
+  */
+
+typedef struct
+{
+  __IO uint32_t TR;         /*!< RTC time register,                                         Address offset: 0x00 */
+  __IO uint32_t DR;         /*!< RTC date register,                                         Address offset: 0x04 */
+  __IO uint32_t CR;         /*!< RTC control register,                                      Address offset: 0x08 */                                                                                            
+  __IO uint32_t ISR;        /*!< RTC initialization and status register,                    Address offset: 0x0C */
+  __IO uint32_t PRER;       /*!< RTC prescaler register,                                    Address offset: 0x10 */
+  __IO uint32_t WUTR;       /*!< RTC wakeup timer register,                                 Address offset: 0x14 */
+       uint32_t reserved;   /*!< Reserved  */
+  __IO uint32_t ALRMAR;     /*!< RTC alarm A register,                                      Address offset: 0x1C */
+  __IO uint32_t ALRMBR;     /*!< RTC alarm B register,                                      Address offset: 0x20 */
+  __IO uint32_t WPR;        /*!< RTC write protection register,                             Address offset: 0x24 */
+  __IO uint32_t SSR;        /*!< RTC sub second register,                                   Address offset: 0x28 */
+  __IO uint32_t SHIFTR;     /*!< RTC shift control register,                                Address offset: 0x2C */
+  __IO uint32_t TSTR;       /*!< RTC time stamp time register,                              Address offset: 0x30 */
+  __IO uint32_t TSDR;       /*!< RTC time stamp date register,                              Address offset: 0x34 */
+  __IO uint32_t TSSSR;      /*!< RTC time-stamp sub second register,                        Address offset: 0x38 */
+  __IO uint32_t CALR;       /*!< RTC calibration register,                                  Address offset: 0x3C */
+  __IO uint32_t TAMPCR;     /*!< RTC tamper configuration register,                         Address offset: 0x40 */
+  __IO uint32_t ALRMASSR;   /*!< RTC alarm A sub second register,                           Address offset: 0x44 */
+  __IO uint32_t ALRMBSSR;   /*!< RTC alarm B sub second register,                           Address offset: 0x48 */
+  __IO uint32_t OR;         /*!< RTC option register,                                       Address offset: 0x4C */
+  __IO uint32_t BKP0R;      /*!< RTC backup register 0,                                     Address offset: 0x50 */
+  __IO uint32_t BKP1R;      /*!< RTC backup register 1,                                     Address offset: 0x54 */
+  __IO uint32_t BKP2R;      /*!< RTC backup register 2,                                     Address offset: 0x58 */
+  __IO uint32_t BKP3R;      /*!< RTC backup register 3,                                     Address offset: 0x5C */
+  __IO uint32_t BKP4R;      /*!< RTC backup register 4,                                     Address offset: 0x60 */
+  __IO uint32_t BKP5R;      /*!< RTC backup register 5,                                     Address offset: 0x64 */
+  __IO uint32_t BKP6R;      /*!< RTC backup register 6,                                     Address offset: 0x68 */
+  __IO uint32_t BKP7R;      /*!< RTC backup register 7,                                     Address offset: 0x6C */
+  __IO uint32_t BKP8R;      /*!< RTC backup register 8,                                     Address offset: 0x70 */
+  __IO uint32_t BKP9R;      /*!< RTC backup register 9,                                     Address offset: 0x74 */
+  __IO uint32_t BKP10R;     /*!< RTC backup register 10,                                    Address offset: 0x78 */
+  __IO uint32_t BKP11R;     /*!< RTC backup register 11,                                    Address offset: 0x7C */
+  __IO uint32_t BKP12R;     /*!< RTC backup register 12,                                    Address offset: 0x80 */
+  __IO uint32_t BKP13R;     /*!< RTC backup register 13,                                    Address offset: 0x84 */
+  __IO uint32_t BKP14R;     /*!< RTC backup register 14,                                    Address offset: 0x88 */
+  __IO uint32_t BKP15R;     /*!< RTC backup register 15,                                    Address offset: 0x8C */
+  __IO uint32_t BKP16R;     /*!< RTC backup register 16,                                    Address offset: 0x90 */
+  __IO uint32_t BKP17R;     /*!< RTC backup register 17,                                    Address offset: 0x94 */
+  __IO uint32_t BKP18R;     /*!< RTC backup register 18,                                    Address offset: 0x98 */
+  __IO uint32_t BKP19R;     /*!< RTC backup register 19,                                    Address offset: 0x9C */
+  __IO uint32_t BKP20R;     /*!< RTC backup register 20,                                    Address offset: 0xA0 */
+  __IO uint32_t BKP21R;     /*!< RTC backup register 21,                                    Address offset: 0xA4 */
+  __IO uint32_t BKP22R;     /*!< RTC backup register 22,                                    Address offset: 0xA8 */
+  __IO uint32_t BKP23R;     /*!< RTC backup register 23,                                    Address offset: 0xAC */
+  __IO uint32_t BKP24R;     /*!< RTC backup register 24,                                    Address offset: 0xB0 */
+  __IO uint32_t BKP25R;     /*!< RTC backup register 25,                                    Address offset: 0xB4 */
+  __IO uint32_t BKP26R;     /*!< RTC backup register 26,                                    Address offset: 0xB8 */
+  __IO uint32_t BKP27R;     /*!< RTC backup register 27,                                    Address offset: 0xBC */
+  __IO uint32_t BKP28R;     /*!< RTC backup register 28,                                    Address offset: 0xC0 */
+  __IO uint32_t BKP29R;     /*!< RTC backup register 29,                                    Address offset: 0xC4 */
+  __IO uint32_t BKP30R;     /*!< RTC backup register 30,                                    Address offset: 0xC8 */
+  __IO uint32_t BKP31R;     /*!< RTC backup register 31,                                    Address offset: 0xCC */
+} RTC_TypeDef;
+
+
+/** 
+  * @brief Serial Audio Interface
+  */
+  
+typedef struct
+{
+  __IO uint32_t GCR;      /*!< SAI global configuration register,        Address offset: 0x00 */
+} SAI_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t CR1;      /*!< SAI block x configuration register 1,     Address offset: 0x04 */
+  __IO uint32_t CR2;      /*!< SAI block x configuration register 2,     Address offset: 0x08 */
+  __IO uint32_t FRCR;     /*!< SAI block x frame configuration register, Address offset: 0x0C */
+  __IO uint32_t SLOTR;    /*!< SAI block x slot register,                Address offset: 0x10 */
+  __IO uint32_t IMR;      /*!< SAI block x interrupt mask register,      Address offset: 0x14 */
+  __IO uint32_t SR;       /*!< SAI block x status register,              Address offset: 0x18 */
+  __IO uint32_t CLRFR;    /*!< SAI block x clear flag register,          Address offset: 0x1C */
+  __IO uint32_t DR;       /*!< SAI block x data register,                Address offset: 0x20 */
+} SAI_Block_TypeDef;
+
+/** 
+  * @brief SPDIF-RX Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t   CR;           /*!< Control register,                   Address offset: 0x00 */
+  __IO uint32_t   IMR;          /*!< Interrupt mask register,            Address offset: 0x04 */  
+  __IO uint32_t   SR;           /*!< Status register,                    Address offset: 0x08 */
+  __IO uint32_t   IFCR;         /*!< Interrupt Flag Clear register,      Address offset: 0x0C */ 
+  __IO uint32_t   DR;           /*!< Data input register,                Address offset: 0x10 */
+  __IO uint32_t   CSR;          /*!< Channel Status register,            Address offset: 0x14 */
+  __IO uint32_t   DIR;          /*!< Debug Information register,         Address offset: 0x18 */
+} SPDIFRX_TypeDef;
+
+
+/** 
+  * @brief SD host Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t POWER;          /*!< SDMMC power control register,    Address offset: 0x00 */
+  __IO uint32_t CLKCR;          /*!< SDMMClock control register,     Address offset: 0x04 */
+  __IO uint32_t ARG;            /*!< SDMMC argument register,         Address offset: 0x08 */
+  __IO uint32_t CMD;            /*!< SDMMC command register,          Address offset: 0x0C */
+  __I uint32_t  RESPCMD;        /*!< SDMMC command response register, Address offset: 0x10 */
+  __I uint32_t  RESP1;          /*!< SDMMC response 1 register,       Address offset: 0x14 */
+  __I uint32_t  RESP2;          /*!< SDMMC response 2 register,       Address offset: 0x18 */
+  __I uint32_t  RESP3;          /*!< SDMMC response 3 register,       Address offset: 0x1C */
+  __I uint32_t  RESP4;          /*!< SDMMC response 4 register,       Address offset: 0x20 */
+  __IO uint32_t DTIMER;         /*!< SDMMC data timer register,       Address offset: 0x24 */
+  __IO uint32_t DLEN;           /*!< SDMMC data length register,      Address offset: 0x28 */
+  __IO uint32_t DCTRL;          /*!< SDMMC data control register,     Address offset: 0x2C */
+  __I uint32_t  DCOUNT;         /*!< SDMMC data counter register,     Address offset: 0x30 */
+  __I uint32_t  STA;            /*!< SDMMC status register,           Address offset: 0x34 */
+  __IO uint32_t ICR;            /*!< SDMMC interrupt clear register,  Address offset: 0x38 */
+  __IO uint32_t MASK;           /*!< SDMMC mask register,             Address offset: 0x3C */
+  uint32_t      RESERVED0[2];   /*!< Reserved, 0x40-0x44                                  */
+  __I uint32_t  FIFOCNT;        /*!< SDMMC FIFO counter register,     Address offset: 0x48 */
+  uint32_t      RESERVED1[13];  /*!< Reserved, 0x4C-0x7C                                  */
+  __IO uint32_t FIFO;           /*!< SDMMC data FIFO register,        Address offset: 0x80 */
+} SDMMC_TypeDef;
+
+/** 
+  * @brief Serial Peripheral Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t CR1;        /*!< SPI control register 1 (not used in I2S mode),      Address offset: 0x00 */
+  __IO uint32_t CR2;        /*!< SPI control register 2,                             Address offset: 0x04 */
+  __IO uint32_t SR;         /*!< SPI status register,                                Address offset: 0x08 */
+  __IO uint32_t DR;         /*!< SPI data register,                                  Address offset: 0x0C */
+  __IO uint32_t CRCPR;      /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+  __IO uint32_t RXCRCR;     /*!< SPI RX CRC register (not used in I2S mode),         Address offset: 0x14 */
+  __IO uint32_t TXCRCR;     /*!< SPI TX CRC register (not used in I2S mode),         Address offset: 0x18 */
+  __IO uint32_t I2SCFGR;    /*!< SPI_I2S configuration register,                     Address offset: 0x1C */
+  __IO uint32_t I2SPR;      /*!< SPI_I2S prescaler register,                         Address offset: 0x20 */
+} SPI_TypeDef;
+
+/** 
+  * @brief QUAD Serial Peripheral Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;       /*!< QUADSPI Control register,                           Address offset: 0x00 */
+  __IO uint32_t DCR;      /*!< QUADSPI Device Configuration register,              Address offset: 0x04 */
+  __IO uint32_t SR;       /*!< QUADSPI Status register,                            Address offset: 0x08 */
+  __IO uint32_t FCR;      /*!< QUADSPI Flag Clear register,                        Address offset: 0x0C */
+  __IO uint32_t DLR;      /*!< QUADSPI Data Length register,                       Address offset: 0x10 */
+  __IO uint32_t CCR;      /*!< QUADSPI Communication Configuration register,       Address offset: 0x14 */
+  __IO uint32_t AR;       /*!< QUADSPI Address register,                           Address offset: 0x18 */
+  __IO uint32_t ABR;      /*!< QUADSPI Alternate Bytes register,                   Address offset: 0x1C */
+  __IO uint32_t DR;       /*!< QUADSPI Data register,                              Address offset: 0x20 */
+  __IO uint32_t PSMKR;    /*!< QUADSPI Polling Status Mask register,               Address offset: 0x24 */
+  __IO uint32_t PSMAR;    /*!< QUADSPI Polling Status Match register,              Address offset: 0x28 */                  
+  __IO uint32_t PIR;      /*!< QUADSPI Polling Interval register,                  Address offset: 0x2C */
+  __IO uint32_t LPTR;     /*!< QUADSPI Low Power Timeout register,                 Address offset: 0x30 */    
+} QUADSPI_TypeDef;
+
+/** 
+  * @brief TIM
+  */
+
+typedef struct
+{
+  __IO uint32_t CR1;         /*!< TIM control register 1,              Address offset: 0x00 */
+  __IO uint32_t CR2;         /*!< TIM control register 2,              Address offset: 0x04 */
+  __IO uint32_t SMCR;        /*!< TIM slave mode control register,     Address offset: 0x08 */
+  __IO uint32_t DIER;        /*!< TIM DMA/interrupt enable register,   Address offset: 0x0C */
+  __IO uint32_t SR;          /*!< TIM status register,                 Address offset: 0x10 */
+  __IO uint32_t EGR;         /*!< TIM event generation register,       Address offset: 0x14 */
+  __IO uint32_t CCMR1;       /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+  __IO uint32_t CCMR2;       /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+  __IO uint32_t CCER;        /*!< TIM capture/compare enable register, Address offset: 0x20 */
+  __IO uint32_t CNT;         /*!< TIM counter register,                Address offset: 0x24 */
+  __IO uint32_t PSC;         /*!< TIM prescaler,                       Address offset: 0x28 */
+  __IO uint32_t ARR;         /*!< TIM auto-reload register,            Address offset: 0x2C */
+  __IO uint32_t RCR;         /*!< TIM repetition counter register,     Address offset: 0x30 */
+  __IO uint32_t CCR1;        /*!< TIM capture/compare register 1,      Address offset: 0x34 */
+  __IO uint32_t CCR2;        /*!< TIM capture/compare register 2,      Address offset: 0x38 */
+  __IO uint32_t CCR3;        /*!< TIM capture/compare register 3,      Address offset: 0x3C */
+  __IO uint32_t CCR4;        /*!< TIM capture/compare register 4,      Address offset: 0x40 */
+  __IO uint32_t BDTR;        /*!< TIM break and dead-time register,    Address offset: 0x44 */
+  __IO uint32_t DCR;         /*!< TIM DMA control register,            Address offset: 0x48 */
+  __IO uint32_t DMAR;        /*!< TIM DMA address for full transfer,   Address offset: 0x4C */
+  __IO uint32_t OR;          /*!< TIM option register,                 Address offset: 0x50 */
+  __IO uint32_t CCMR3;       /*!< TIM capture/compare mode register 3,      Address offset: 0x54 */
+  __IO uint32_t CCR5;        /*!< TIM capture/compare mode register5,       Address offset: 0x58 */
+  __IO uint32_t CCR6;        /*!< TIM capture/compare mode register6,       Address offset: 0x5C */
+
+} TIM_TypeDef;
+
+/** 
+  * @brief LPTIMIMER
+  */
+typedef struct
+{
+  __IO uint32_t ISR;      /*!< LPTIM Interrupt and Status register,                Address offset: 0x00 */
+  __IO uint32_t ICR;      /*!< LPTIM Interrupt Clear register,                     Address offset: 0x04 */
+  __IO uint32_t IER;      /*!< LPTIM Interrupt Enable register,                    Address offset: 0x08 */
+  __IO uint32_t CFGR;     /*!< LPTIM Configuration register,                       Address offset: 0x0C */
+  __IO uint32_t CR;       /*!< LPTIM Control register,                             Address offset: 0x10 */
+  __IO uint32_t CMP;      /*!< LPTIM Compare register,                             Address offset: 0x14 */
+  __IO uint32_t ARR;      /*!< LPTIM Autoreload register,                          Address offset: 0x18 */
+  __IO uint32_t CNT;      /*!< LPTIM Counter register,                             Address offset: 0x1C */
+} LPTIM_TypeDef;
+
+
+/** 
+  * @brief Universal Synchronous Asynchronous Receiver Transmitter
+  */
+ 
+typedef struct
+{
+  __IO uint32_t CR1;    /*!< USART Control register 1,                 Address offset: 0x00 */ 
+  __IO uint32_t CR2;    /*!< USART Control register 2,                 Address offset: 0x04 */ 
+  __IO uint32_t CR3;    /*!< USART Control register 3,                 Address offset: 0x08 */
+  __IO uint32_t BRR;    /*!< USART Baud rate register,                 Address offset: 0x0C */                                               
+  __IO uint32_t GTPR;   /*!< USART Guard time and prescaler register,  Address offset: 0x10 */
+  __IO uint32_t RTOR;   /*!< USART Receiver Time Out register,         Address offset: 0x14 */  
+  __IO uint32_t RQR;    /*!< USART Request register,                   Address offset: 0x18 */
+  __IO uint32_t ISR;    /*!< USART Interrupt and status register,      Address offset: 0x1C */
+  __IO uint32_t ICR;    /*!< USART Interrupt flag Clear register,      Address offset: 0x20 */
+  __IO uint32_t RDR;    /*!< USART Receive Data register,              Address offset: 0x24 */
+  __IO uint32_t TDR;    /*!< USART Transmit Data register,             Address offset: 0x28 */
+} USART_TypeDef;
+
+
+/** 
+  * @brief Window WATCHDOG
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;   /*!< WWDG Control register,       Address offset: 0x00 */
+  __IO uint32_t CFR;  /*!< WWDG Configuration register, Address offset: 0x04 */
+  __IO uint32_t SR;   /*!< WWDG Status register,        Address offset: 0x08 */
+} WWDG_TypeDef;
+
+
+/** 
+  * @brief RNG
+  */
+  
+typedef struct 
+{
+  __IO uint32_t CR;  /*!< RNG control register, Address offset: 0x00 */
+  __IO uint32_t SR;  /*!< RNG status register,  Address offset: 0x04 */
+  __IO uint32_t DR;  /*!< RNG data register,    Address offset: 0x08 */
+} RNG_TypeDef;
+
+/**
+  * @}
+  */
+
+/** 
+  * @brief USB_OTG_Core_Registers
+  */
+typedef struct
+{
+ __IO uint32_t GOTGCTL;               /*!< USB_OTG Control and Status Register          000h */
+  __IO uint32_t GOTGINT;              /*!< USB_OTG Interrupt Register                   004h */
+  __IO uint32_t GAHBCFG;              /*!< Core AHB Configuration Register              008h */
+  __IO uint32_t GUSBCFG;              /*!< Core USB Configuration Register              00Ch */
+  __IO uint32_t GRSTCTL;              /*!< Core Reset Register                          010h */
+  __IO uint32_t GINTSTS;              /*!< Core Interrupt Register                      014h */
+  __IO uint32_t GINTMSK;              /*!< Core Interrupt Mask Register                 018h */
+  __IO uint32_t GRXSTSR;              /*!< Receive Sts Q Read Register                  01Ch */
+  __IO uint32_t GRXSTSP;              /*!< Receive Sts Q Read & POP Register            020h */
+  __IO uint32_t GRXFSIZ;              /*!< Receive FIFO Size Register                   024h */
+  __IO uint32_t DIEPTXF0_HNPTXFSIZ;   /*!< EP0 / Non Periodic Tx FIFO Size Register     028h */
+  __IO uint32_t HNPTXSTS;             /*!< Non Periodic Tx FIFO/Queue Sts reg           02Ch */
+  uint32_t Reserved30[2];             /*!< Reserved                                     030h */
+  __IO uint32_t GCCFG;                /*!< General Purpose IO Register                  038h */
+  __IO uint32_t CID;                  /*!< User ID Register                             03Ch */
+  uint32_t  Reserved5[3];             /*!< Reserved                                040h-048h */
+  __IO uint32_t GHWCFG3;              /*!< User HW config3                              04Ch */
+  uint32_t  Reserved6;                /*!< Reserved                                     050h */ 
+  __IO uint32_t GLPMCFG;              /*!< LPM Register                                 054h */
+  __IO uint32_t GPWRDN;               /*!< Power Down Register                          058h */
+  __IO uint32_t GDFIFOCFG;            /*!< DFIFO Software Config Register               05Ch */
+   __IO uint32_t GADPCTL;             /*!< ADP Timer, Control and Status Register       60Ch */
+    uint32_t  Reserved43[39];         /*!< Reserved                                058h-0FFh */
+  __IO uint32_t HPTXFSIZ;             /*!< Host Periodic Tx FIFO Size Reg               100h */
+  __IO uint32_t DIEPTXF[0x0F];        /*!< dev Periodic Transmit FIFO */
+} USB_OTG_GlobalTypeDef;
+
+
+/** 
+  * @brief USB_OTG_device_Registers
+  */
+typedef struct 
+{
+  __IO uint32_t DCFG;            /*!< dev Configuration Register   800h */
+  __IO uint32_t DCTL;            /*!< dev Control Register         804h */
+  __IO uint32_t DSTS;            /*!< dev Status Register (RO)     808h */
+  uint32_t Reserved0C;           /*!< Reserved                     80Ch */
+  __IO uint32_t DIEPMSK;         /*!< dev IN Endpoint Mask         810h */
+  __IO uint32_t DOEPMSK;         /*!< dev OUT Endpoint Mask        814h */
+  __IO uint32_t DAINT;           /*!< dev All Endpoints Itr Reg    818h */
+  __IO uint32_t DAINTMSK;        /*!< dev All Endpoints Itr Mask   81Ch */
+  uint32_t  Reserved20;          /*!< Reserved                     820h */
+  uint32_t Reserved9;            /*!< Reserved                     824h */
+  __IO uint32_t DVBUSDIS;        /*!< dev VBUS discharge Register  828h */
+  __IO uint32_t DVBUSPULSE;      /*!< dev VBUS Pulse Register      82Ch */
+  __IO uint32_t DTHRCTL;         /*!< dev threshold                830h */
+  __IO uint32_t DIEPEMPMSK;      /*!< dev empty msk                834h */
+  __IO uint32_t DEACHINT;        /*!< dedicated EP interrupt       838h */
+  __IO uint32_t DEACHMSK;        /*!< dedicated EP msk             83Ch */  
+  uint32_t Reserved40;           /*!< dedicated EP mask            840h */
+  __IO uint32_t DINEP1MSK;       /*!< dedicated EP mask            844h */
+  uint32_t  Reserved44[15];      /*!< Reserved                 844-87Ch */
+  __IO uint32_t DOUTEP1MSK;      /*!< dedicated EP msk             884h */   
+} USB_OTG_DeviceTypeDef;
+
+
+/** 
+  * @brief USB_OTG_IN_Endpoint-Specific_Register
+  */
+typedef struct 
+{
+  __IO uint32_t DIEPCTL;           /*!< dev IN Endpoint Control Reg    900h + (ep_num * 20h) + 00h */
+  uint32_t Reserved04;             /*!< Reserved                       900h + (ep_num * 20h) + 04h */
+  __IO uint32_t DIEPINT;           /*!< dev IN Endpoint Itr Reg        900h + (ep_num * 20h) + 08h */
+  uint32_t Reserved0C;             /*!< Reserved                       900h + (ep_num * 20h) + 0Ch */
+  __IO uint32_t DIEPTSIZ;          /*!< IN Endpoint Txfer Size         900h + (ep_num * 20h) + 10h */
+  __IO uint32_t DIEPDMA;           /*!< IN Endpoint DMA Address Reg    900h + (ep_num * 20h) + 14h */
+  __IO uint32_t DTXFSTS;           /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+  uint32_t Reserved18;             /*!< Reserved  900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+} USB_OTG_INEndpointTypeDef;
+
+
+/** 
+  * @brief USB_OTG_OUT_Endpoint-Specific_Registers
+  */
+typedef struct 
+{
+  __IO uint32_t DOEPCTL;       /*!< dev OUT Endpoint Control Reg           B00h + (ep_num * 20h) + 00h */
+  uint32_t Reserved04;         /*!< Reserved                               B00h + (ep_num * 20h) + 04h */
+  __IO uint32_t DOEPINT;       /*!< dev OUT Endpoint Itr Reg               B00h + (ep_num * 20h) + 08h */
+  uint32_t Reserved0C;         /*!< Reserved                               B00h + (ep_num * 20h) + 0Ch */
+  __IO uint32_t DOEPTSIZ;      /*!< dev OUT Endpoint Txfer Size            B00h + (ep_num * 20h) + 10h */
+  __IO uint32_t DOEPDMA;       /*!< dev OUT Endpoint DMA Address           B00h + (ep_num * 20h) + 14h */
+  uint32_t Reserved18[2];      /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */
+} USB_OTG_OUTEndpointTypeDef;
+
+
+/** 
+  * @brief USB_OTG_Host_Mode_Register_Structures
+  */
+typedef struct 
+{
+  __IO uint32_t HCFG;             /*!< Host Configuration Register          400h */
+  __IO uint32_t HFIR;             /*!< Host Frame Interval Register         404h */
+  __IO uint32_t HFNUM;            /*!< Host Frame Nbr/Frame Remaining       408h */
+  uint32_t Reserved40C;           /*!< Reserved                             40Ch */
+  __IO uint32_t HPTXSTS;          /*!< Host Periodic Tx FIFO/ Queue Status  410h */
+  __IO uint32_t HAINT;            /*!< Host All Channels Interrupt Register 414h */
+  __IO uint32_t HAINTMSK;         /*!< Host All Channels Interrupt Mask     418h */
+} USB_OTG_HostTypeDef;
+
+/** 
+  * @brief USB_OTG_Host_Channel_Specific_Registers
+  */
+typedef struct
+{
+  __IO uint32_t HCCHAR;           /*!< Host Channel Characteristics Register    500h */
+  __IO uint32_t HCSPLT;           /*!< Host Channel Split Control Register      504h */
+  __IO uint32_t HCINT;            /*!< Host Channel Interrupt Register          508h */
+  __IO uint32_t HCINTMSK;         /*!< Host Channel Interrupt Mask Register     50Ch */
+  __IO uint32_t HCTSIZ;           /*!< Host Channel Transfer Size Register      510h */
+  __IO uint32_t HCDMA;            /*!< Host Channel DMA Address Register        514h */
+  uint32_t Reserved[2];           /*!< Reserved                                      */
+} USB_OTG_HostChannelTypeDef;
+/**
+  * @}
+  */
+
+
+
+/** @addtogroup Peripheral_memory_map
+  * @{
+  */
+#define RAMITCM_BASE           ((uint32_t)0x00000000) /*!< Base address of :16KB RAM reserved for CPU execution/instruction accessible over ITCM   */
+#define FLASHITCM_BASE         ((uint32_t)0x00200000) /*!< Base address of :(up to 1 MB) embedded FLASH memory  accessible over ITCM               */                       
+#define FLASHAXI_BASE          ((uint32_t)0x08000000) /*!< Base address of : (up to 1 MB) embedded FLASH memory accessible over AXI                */                       
+#define RAMDTCM_BASE           ((uint32_t)0x20000000) /*!< Base address of : 64KB system data RAM accessible over DTCM                             */
+#define PERIPH_BASE            ((uint32_t)0x40000000) /*!< Base address of : AHB/ABP Peripherals                                                   */
+#define BKPSRAM_BASE           ((uint32_t)0x40024000) /*!< Base address of : Backup SRAM(4 KB)                                                     */
+#define QSPI_BASE              ((uint32_t)0x90000000) /*!< Base address of : QSPI memories  accessible over AXI                                    */
+#define FMC_R_BASE             ((uint32_t)0xA0000000) /*!< Base address of : FMC Control registers                                                 */
+#define QSPI_R_BASE            ((uint32_t)0xA0001000) /*!< Base address of : QSPI Control  registers                                               */
+#define SRAM1_BASE             ((uint32_t)0x20010000) /*!< Base address of : 240KB RAM1 accessible over AXI/AHB                                    */
+#define SRAM2_BASE             ((uint32_t)0x2004C000) /*!< Base address of : 16KB RAM2 accessible over AXI/AHB                                     */
+#define FLASH_END              ((uint32_t)0x080FFFFF) /*!< FLASH end address */
+
+/* Legacy define */
+#define FLASH_BASE     FLASHAXI_BASE
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE        PERIPH_BASE
+#define APB2PERIPH_BASE       (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE       (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE       (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE             (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE             (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE             (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE             (APB1PERIPH_BASE + 0x0C00)
+#define TIM6_BASE             (APB1PERIPH_BASE + 0x1000)
+#define TIM7_BASE             (APB1PERIPH_BASE + 0x1400)
+#define TIM12_BASE            (APB1PERIPH_BASE + 0x1800)
+#define TIM13_BASE            (APB1PERIPH_BASE + 0x1C00)
+#define TIM14_BASE            (APB1PERIPH_BASE + 0x2000)
+#define LPTIM1_BASE           (APB1PERIPH_BASE + 0x2400)
+#define RTC_BASE              (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE             (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE             (APB1PERIPH_BASE + 0x3000)
+#define SPI2_BASE             (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE             (APB1PERIPH_BASE + 0x3C00)
+#define SPDIFRX_BASE          (APB1PERIPH_BASE + 0x4000)
+#define USART2_BASE           (APB1PERIPH_BASE + 0x4400)
+#define USART3_BASE           (APB1PERIPH_BASE + 0x4800)
+#define UART4_BASE            (APB1PERIPH_BASE + 0x4C00)
+#define UART5_BASE            (APB1PERIPH_BASE + 0x5000)
+#define I2C1_BASE             (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE             (APB1PERIPH_BASE + 0x5800)
+#define I2C3_BASE             (APB1PERIPH_BASE + 0x5C00)
+#define I2C4_BASE             (APB1PERIPH_BASE + 0x6000)
+#define CAN1_BASE             (APB1PERIPH_BASE + 0x6400)
+#define CAN2_BASE             (APB1PERIPH_BASE + 0x6800)
+#define CEC_BASE              (APB1PERIPH_BASE + 0x6C00)
+#define PWR_BASE              (APB1PERIPH_BASE + 0x7000)
+#define DAC_BASE              (APB1PERIPH_BASE + 0x7400)
+#define UART7_BASE            (APB1PERIPH_BASE + 0x7800)
+#define UART8_BASE            (APB1PERIPH_BASE + 0x7C00)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE             (APB2PERIPH_BASE + 0x0000)
+#define TIM8_BASE             (APB2PERIPH_BASE + 0x0400)
+#define USART1_BASE           (APB2PERIPH_BASE + 0x1000)
+#define USART6_BASE           (APB2PERIPH_BASE + 0x1400)
+#define ADC1_BASE             (APB2PERIPH_BASE + 0x2000)
+#define ADC2_BASE             (APB2PERIPH_BASE + 0x2100)
+#define ADC3_BASE             (APB2PERIPH_BASE + 0x2200)
+#define ADC_BASE              (APB2PERIPH_BASE + 0x2300)
+#define SDMMC1_BASE           (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE             (APB2PERIPH_BASE + 0x3000)
+#define SPI4_BASE             (APB2PERIPH_BASE + 0x3400)
+#define SYSCFG_BASE           (APB2PERIPH_BASE + 0x3800)
+#define EXTI_BASE             (APB2PERIPH_BASE + 0x3C00)
+#define TIM9_BASE             (APB2PERIPH_BASE + 0x4000)
+#define TIM10_BASE            (APB2PERIPH_BASE + 0x4400)
+#define TIM11_BASE            (APB2PERIPH_BASE + 0x4800)
+#define SPI5_BASE             (APB2PERIPH_BASE + 0x5000)
+#define SPI6_BASE             (APB2PERIPH_BASE + 0x5400)
+#define SAI1_BASE             (APB2PERIPH_BASE + 0x5800)
+#define SAI2_BASE             (APB2PERIPH_BASE + 0x5C00)
+#define SAI1_Block_A_BASE     (SAI1_BASE + 0x004)
+#define SAI1_Block_B_BASE     (SAI1_BASE + 0x024)
+#define SAI2_Block_A_BASE     (SAI2_BASE + 0x004)
+#define SAI2_Block_B_BASE     (SAI2_BASE + 0x024)
+#define LTDC_BASE             (APB2PERIPH_BASE + 0x6800)
+#define LTDC_Layer1_BASE      (LTDC_BASE + 0x84)
+#define LTDC_Layer2_BASE      (LTDC_BASE + 0x104)
+/*!< AHB1 peripherals */
+#define GPIOA_BASE            (AHB1PERIPH_BASE + 0x0000)
+#define GPIOB_BASE            (AHB1PERIPH_BASE + 0x0400)
+#define GPIOC_BASE            (AHB1PERIPH_BASE + 0x0800)
+#define GPIOD_BASE            (AHB1PERIPH_BASE + 0x0C00)
+#define GPIOE_BASE            (AHB1PERIPH_BASE + 0x1000)
+#define GPIOF_BASE            (AHB1PERIPH_BASE + 0x1400)
+#define GPIOG_BASE            (AHB1PERIPH_BASE + 0x1800)
+#define GPIOH_BASE            (AHB1PERIPH_BASE + 0x1C00)
+#define GPIOI_BASE            (AHB1PERIPH_BASE + 0x2000)
+#define GPIOJ_BASE            (AHB1PERIPH_BASE + 0x2400)
+#define GPIOK_BASE            (AHB1PERIPH_BASE + 0x2800)
+#define CRC_BASE              (AHB1PERIPH_BASE + 0x3000)
+#define RCC_BASE              (AHB1PERIPH_BASE + 0x3800)
+#define FLASH_R_BASE          (AHB1PERIPH_BASE + 0x3C00)
+#define DMA1_BASE             (AHB1PERIPH_BASE + 0x6000)
+#define DMA1_Stream0_BASE     (DMA1_BASE + 0x010)
+#define DMA1_Stream1_BASE     (DMA1_BASE + 0x028)
+#define DMA1_Stream2_BASE     (DMA1_BASE + 0x040)
+#define DMA1_Stream3_BASE     (DMA1_BASE + 0x058)
+#define DMA1_Stream4_BASE     (DMA1_BASE + 0x070)
+#define DMA1_Stream5_BASE     (DMA1_BASE + 0x088)
+#define DMA1_Stream6_BASE     (DMA1_BASE + 0x0A0)
+#define DMA1_Stream7_BASE     (DMA1_BASE + 0x0B8)
+#define DMA2_BASE             (AHB1PERIPH_BASE + 0x6400)
+#define DMA2_Stream0_BASE     (DMA2_BASE + 0x010)
+#define DMA2_Stream1_BASE     (DMA2_BASE + 0x028)
+#define DMA2_Stream2_BASE     (DMA2_BASE + 0x040)
+#define DMA2_Stream3_BASE     (DMA2_BASE + 0x058)
+#define DMA2_Stream4_BASE     (DMA2_BASE + 0x070)
+#define DMA2_Stream5_BASE     (DMA2_BASE + 0x088)
+#define DMA2_Stream6_BASE     (DMA2_BASE + 0x0A0)
+#define DMA2_Stream7_BASE     (DMA2_BASE + 0x0B8)
+#define ETH_BASE              (AHB1PERIPH_BASE + 0x8000)
+#define ETH_MAC_BASE          (ETH_BASE)
+#define ETH_MMC_BASE          (ETH_BASE + 0x0100)
+#define ETH_PTP_BASE          (ETH_BASE + 0x0700)
+#define ETH_DMA_BASE          (ETH_BASE + 0x1000)
+#define DMA2D_BASE            (AHB1PERIPH_BASE + 0xB000)
+/*!< AHB2 peripherals */
+#define DCMI_BASE             (AHB2PERIPH_BASE + 0x50000)
+#define RNG_BASE              (AHB2PERIPH_BASE + 0x60800)
+/*!< FMC Bankx registers base address */
+#define FMC_Bank1_R_BASE      (FMC_R_BASE + 0x0000)
+#define FMC_Bank1E_R_BASE     (FMC_R_BASE + 0x0104)
+#define FMC_Bank3_R_BASE      (FMC_R_BASE + 0x0080)
+#define FMC_Bank5_6_R_BASE    (FMC_R_BASE + 0x0140)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE           ((uint32_t )0xE0042000)
+
+/*!< USB registers base address */
+#define USB_OTG_HS_PERIPH_BASE               ((uint32_t )0x40040000)
+#define USB_OTG_FS_PERIPH_BASE               ((uint32_t )0x50000000)
+
+#define USB_OTG_GLOBAL_BASE                  ((uint32_t )0x000)
+#define USB_OTG_DEVICE_BASE                  ((uint32_t )0x800)
+#define USB_OTG_IN_ENDPOINT_BASE             ((uint32_t )0x900)
+#define USB_OTG_OUT_ENDPOINT_BASE            ((uint32_t )0xB00)
+#define USB_OTG_EP_REG_SIZE                  ((uint32_t )0x20)
+#define USB_OTG_HOST_BASE                    ((uint32_t )0x400)
+#define USB_OTG_HOST_PORT_BASE               ((uint32_t )0x440)
+#define USB_OTG_HOST_CHANNEL_BASE            ((uint32_t )0x500)
+#define USB_OTG_HOST_CHANNEL_SIZE            ((uint32_t )0x20)
+#define USB_OTG_PCGCCTL_BASE                 ((uint32_t )0xE00)
+#define USB_OTG_FIFO_BASE                    ((uint32_t )0x1000)
+#define USB_OTG_FIFO_SIZE                    ((uint32_t )0x1000)
+
+/**
+  * @}
+  */
+  
+/** @addtogroup Peripheral_declaration
+  * @{
+  */  
+#define TIM2                ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3                ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4                ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5                ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6                ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7                ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12               ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13               ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14               ((TIM_TypeDef *) TIM14_BASE)
+#define LPTIM1              ((LPTIM_TypeDef *) LPTIM1_BASE)
+#define RTC                 ((RTC_TypeDef *) RTC_BASE)
+#define WWDG                ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG                ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2                ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3                ((SPI_TypeDef *) SPI3_BASE)
+#define SPDIFRX             ((SPDIFRX_TypeDef *) SPDIFRX_BASE) 
+#define USART2              ((USART_TypeDef *) USART2_BASE)
+#define USART3              ((USART_TypeDef *) USART3_BASE)
+#define UART4               ((USART_TypeDef *) UART4_BASE)
+#define UART5               ((USART_TypeDef *) UART5_BASE)
+#define I2C1                ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2                ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3                ((I2C_TypeDef *) I2C3_BASE)
+#define I2C4                ((I2C_TypeDef *) I2C4_BASE)
+#define CAN1                ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2                ((CAN_TypeDef *) CAN2_BASE)
+#define CEC                 ((CEC_TypeDef *) CEC_BASE)
+#define PWR                 ((PWR_TypeDef *) PWR_BASE)
+#define DAC                 ((DAC_TypeDef *) DAC_BASE)
+#define UART7               ((USART_TypeDef *) UART7_BASE)
+#define UART8               ((USART_TypeDef *) UART8_BASE)
+#define TIM1                ((TIM_TypeDef *) TIM1_BASE)
+#define TIM8                ((TIM_TypeDef *) TIM8_BASE)
+#define USART1              ((USART_TypeDef *) USART1_BASE)
+#define USART6              ((USART_TypeDef *) USART6_BASE)
+#define ADC                 ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1                ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2                ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3                ((ADC_TypeDef *) ADC3_BASE)
+#define SDMMC1              ((SDMMC_TypeDef *) SDMMC1_BASE)
+#define SPI1                ((SPI_TypeDef *) SPI1_BASE) 
+#define SPI4                ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG              ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI                ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9                ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10               ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11               ((TIM_TypeDef *) TIM11_BASE)
+#define SPI5                ((SPI_TypeDef *) SPI5_BASE)
+#define SPI6                ((SPI_TypeDef *) SPI6_BASE)
+#define SAI1                ((SAI_TypeDef *) SAI1_BASE)
+#define SAI2                ((SAI_TypeDef *) SAI2_BASE)
+#define SAI1_Block_A        ((SAI_Block_TypeDef *)SAI1_Block_A_BASE)
+#define SAI1_Block_B        ((SAI_Block_TypeDef *)SAI1_Block_B_BASE)
+#define SAI2_Block_A        ((SAI_Block_TypeDef *)SAI2_Block_A_BASE)
+#define SAI2_Block_B        ((SAI_Block_TypeDef *)SAI2_Block_B_BASE)
+#define LTDC                ((LTDC_TypeDef *)LTDC_BASE)
+#define LTDC_Layer1         ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE)
+#define LTDC_Layer2         ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE)
+#define GPIOA               ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB               ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC               ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD               ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE               ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF               ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG               ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH               ((GPIO_TypeDef *) GPIOH_BASE)
+#define GPIOI               ((GPIO_TypeDef *) GPIOI_BASE)
+#define GPIOJ               ((GPIO_TypeDef *) GPIOJ_BASE)
+#define GPIOK               ((GPIO_TypeDef *) GPIOK_BASE)
+#define CRC                 ((CRC_TypeDef *) CRC_BASE)
+#define RCC                 ((RCC_TypeDef *) RCC_BASE)
+#define FLASH               ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1                ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0        ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1        ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2        ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3        ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4        ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5        ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6        ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7        ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2                ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0        ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1        ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2        ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3        ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4        ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5        ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6        ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7        ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define ETH                 ((ETH_TypeDef *) ETH_BASE)  
+#define DMA2D               ((DMA2D_TypeDef *)DMA2D_BASE)
+#define DCMI                ((DCMI_TypeDef *) DCMI_BASE)
+#define RNG                 ((RNG_TypeDef *) RNG_BASE)
+#define FMC_Bank1           ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE)
+#define FMC_Bank1E          ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE)
+#define FMC_Bank3           ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE)
+#define FMC_Bank5_6         ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE)
+#define QUADSPI             ((QUADSPI_TypeDef *) QSPI_R_BASE)
+#define DBGMCU              ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define USB_OTG_FS          ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+#define USB_OTG_HS          ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE)
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_constants
+  * @{
+  */
+  
+  /** @addtogroup Peripheral_Registers_Bits_Definition
+  * @{
+  */
+    
+/******************************************************************************/
+/*                         Peripheral Registers_Bits_Definition               */
+/******************************************************************************/
+
+/******************************************************************************/
+/*                                                                            */
+/*                        Analog to Digital Converter                         */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for ADC_SR register  ********************/
+#define  ADC_SR_AWD                          ((uint32_t)0x00000001)        /*!<Analog watchdog flag                                 */
+#define  ADC_SR_EOC                          ((uint32_t)0x00000002)        /*!<End of conversion                                    */
+#define  ADC_SR_JEOC                         ((uint32_t)0x00000004)        /*!<Injected channel end of conversion                   */
+#define  ADC_SR_JSTRT                        ((uint32_t)0x00000008)        /*!<Injected channel Start flag                          */
+#define  ADC_SR_STRT                         ((uint32_t)0x00000010)        /*!<Regular channel Start flag                           */
+#define  ADC_SR_OVR                          ((uint32_t)0x00000020)        /*!<Overrun flag                                         */
+
+/*******************  Bit definition for ADC_CR1 register  ********************/
+#define  ADC_CR1_AWDCH                       ((uint32_t)0x0000001F)        /*!<AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define  ADC_CR1_AWDCH_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_CR1_AWDCH_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_CR1_AWDCH_2                     ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_CR1_AWDCH_3                     ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_CR1_AWDCH_4                     ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_CR1_EOCIE                       ((uint32_t)0x00000020)        /*!<Interrupt enable for EOC                             */
+#define  ADC_CR1_AWDIE                       ((uint32_t)0x00000040)        /*!<AAnalog Watchdog interrupt enable                    */
+#define  ADC_CR1_JEOCIE                      ((uint32_t)0x00000080)        /*!<Interrupt enable for injected channels               */
+#define  ADC_CR1_SCAN                        ((uint32_t)0x00000100)        /*!<Scan mode */
+#define  ADC_CR1_AWDSGL                      ((uint32_t)0x00000200)        /*!<Enable the watchdog on a single channel in scan mode */
+#define  ADC_CR1_JAUTO                       ((uint32_t)0x00000400)        /*!<Automatic injected group conversion                  */
+#define  ADC_CR1_DISCEN                      ((uint32_t)0x00000800)        /*!<Discontinuous mode on regular channels               */
+#define  ADC_CR1_JDISCEN                     ((uint32_t)0x00001000)        /*!<Discontinuous mode on injected channels              */
+#define  ADC_CR1_DISCNUM                     ((uint32_t)0x0000E000)        /*!<DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define  ADC_CR1_DISCNUM_0                   ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  ADC_CR1_DISCNUM_1                   ((uint32_t)0x00004000)        /*!<Bit 1 */
+#define  ADC_CR1_DISCNUM_2                   ((uint32_t)0x00008000)        /*!<Bit 2 */
+#define  ADC_CR1_JAWDEN                      ((uint32_t)0x00400000)        /*!<Analog watchdog enable on injected channels          */
+#define  ADC_CR1_AWDEN                       ((uint32_t)0x00800000)        /*!<Analog watchdog enable on regular channels           */
+#define  ADC_CR1_RES                         ((uint32_t)0x03000000)        /*!<RES[2:0] bits (Resolution)                           */
+#define  ADC_CR1_RES_0                       ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  ADC_CR1_RES_1                       ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  ADC_CR1_OVRIE                       ((uint32_t)0x04000000)         /*!<overrun interrupt enable */
+  
+/*******************  Bit definition for ADC_CR2 register  ********************/
+#define  ADC_CR2_ADON                        ((uint32_t)0x00000001)        /*!<A/D Converter ON / OFF                                       */
+#define  ADC_CR2_CONT                        ((uint32_t)0x00000002)        /*!<Continuous Conversion                                        */
+#define  ADC_CR2_DMA                         ((uint32_t)0x00000100)        /*!<Direct Memory access mode                                    */
+#define  ADC_CR2_DDS                         ((uint32_t)0x00000200)        /*!<DMA disable selection (Single ADC)                           */
+#define  ADC_CR2_EOCS                        ((uint32_t)0x00000400)        /*!<End of conversion selection                                  */
+#define  ADC_CR2_ALIGN                       ((uint32_t)0x00000800)        /*!<Data Alignment                                               */
+#define  ADC_CR2_JEXTSEL                     ((uint32_t)0x000F0000)        /*!<JEXTSEL[3:0] bits (External event select for injected group) */
+#define  ADC_CR2_JEXTSEL_0                   ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  ADC_CR2_JEXTSEL_1                   ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  ADC_CR2_JEXTSEL_2                   ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  ADC_CR2_JEXTSEL_3                   ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  ADC_CR2_JEXTEN                      ((uint32_t)0x00300000)        /*!<JEXTEN[1:0] bits (External Trigger Conversion mode for injected channelsp) */
+#define  ADC_CR2_JEXTEN_0                    ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_CR2_JEXTEN_1                    ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  ADC_CR2_JSWSTART                    ((uint32_t)0x00400000)        /*!<Start Conversion of injected channels */
+#define  ADC_CR2_EXTSEL                      ((uint32_t)0x0F000000)        /*!<EXTSEL[3:0] bits (External Event Select for regular group) */
+#define  ADC_CR2_EXTSEL_0                    ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  ADC_CR2_EXTSEL_1                    ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  ADC_CR2_EXTSEL_2                    ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  ADC_CR2_EXTSEL_3                    ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  ADC_CR2_EXTEN                       ((uint32_t)0x30000000)        /*!<EXTEN[1:0] bits (External Trigger Conversion mode for regular channelsp) */
+#define  ADC_CR2_EXTEN_0                     ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  ADC_CR2_EXTEN_1                     ((uint32_t)0x20000000)        /*!<Bit 1 */
+#define  ADC_CR2_SWSTART                     ((uint32_t)0x40000000)        /*!<Start Conversion of regular channels */
+
+/******************  Bit definition for ADC_SMPR1 register  *******************/
+#define  ADC_SMPR1_SMP10                     ((uint32_t)0x00000007)        /*!<SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define  ADC_SMPR1_SMP10_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP10_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP10_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP11                     ((uint32_t)0x00000038)        /*!<SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define  ADC_SMPR1_SMP11_0                   ((uint32_t)0x00000008)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP11_1                   ((uint32_t)0x00000010)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP11_2                   ((uint32_t)0x00000020)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP12                     ((uint32_t)0x000001C0)        /*!<SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define  ADC_SMPR1_SMP12_0                   ((uint32_t)0x00000040)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP12_1                   ((uint32_t)0x00000080)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP12_2                   ((uint32_t)0x00000100)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP13                     ((uint32_t)0x00000E00)        /*!<SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define  ADC_SMPR1_SMP13_0                   ((uint32_t)0x00000200)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP13_1                   ((uint32_t)0x00000400)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP13_2                   ((uint32_t)0x00000800)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP14                     ((uint32_t)0x00007000)        /*!<SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define  ADC_SMPR1_SMP14_0                   ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP14_1                   ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP14_2                   ((uint32_t)0x00004000)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP15                     ((uint32_t)0x00038000)        /*!<SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define  ADC_SMPR1_SMP15_0                   ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP15_1                   ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP15_2                   ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP16                     ((uint32_t)0x001C0000)        /*!<SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define  ADC_SMPR1_SMP16_0                   ((uint32_t)0x00040000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP16_1                   ((uint32_t)0x00080000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP16_2                   ((uint32_t)0x00100000)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP17                     ((uint32_t)0x00E00000)        /*!<SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define  ADC_SMPR1_SMP17_0                   ((uint32_t)0x00200000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP17_1                   ((uint32_t)0x00400000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP17_2                   ((uint32_t)0x00800000)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP18                     ((uint32_t)0x07000000)        /*!<SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define  ADC_SMPR1_SMP18_0                   ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP18_1                   ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP18_2                   ((uint32_t)0x04000000)        /*!<Bit 2 */
+
+/******************  Bit definition for ADC_SMPR2 register  *******************/
+#define  ADC_SMPR2_SMP0                      ((uint32_t)0x00000007)        /*!<SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define  ADC_SMPR2_SMP0_0                    ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP0_1                    ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP0_2                    ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP1                      ((uint32_t)0x00000038)        /*!<SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define  ADC_SMPR2_SMP1_0                    ((uint32_t)0x00000008)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP1_1                    ((uint32_t)0x00000010)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP1_2                    ((uint32_t)0x00000020)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP2                      ((uint32_t)0x000001C0)        /*!<SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define  ADC_SMPR2_SMP2_0                    ((uint32_t)0x00000040)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP2_1                    ((uint32_t)0x00000080)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP2_2                    ((uint32_t)0x00000100)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP3                      ((uint32_t)0x00000E00)        /*!<SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define  ADC_SMPR2_SMP3_0                    ((uint32_t)0x00000200)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP3_1                    ((uint32_t)0x00000400)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP3_2                    ((uint32_t)0x00000800)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP4                      ((uint32_t)0x00007000)        /*!<SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define  ADC_SMPR2_SMP4_0                    ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP4_1                    ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP4_2                    ((uint32_t)0x00004000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP5                      ((uint32_t)0x00038000)        /*!<SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define  ADC_SMPR2_SMP5_0                    ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP5_1                    ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP5_2                    ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP6                      ((uint32_t)0x001C0000)        /*!<SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define  ADC_SMPR2_SMP6_0                    ((uint32_t)0x00040000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP6_1                    ((uint32_t)0x00080000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP6_2                    ((uint32_t)0x00100000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP7                      ((uint32_t)0x00E00000)        /*!<SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define  ADC_SMPR2_SMP7_0                    ((uint32_t)0x00200000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP7_1                    ((uint32_t)0x00400000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP7_2                    ((uint32_t)0x00800000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP8                      ((uint32_t)0x07000000)        /*!<SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define  ADC_SMPR2_SMP8_0                    ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP8_1                    ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP8_2                    ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP9                      ((uint32_t)0x38000000)        /*!<SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define  ADC_SMPR2_SMP9_0                    ((uint32_t)0x08000000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP9_1                    ((uint32_t)0x10000000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP9_2                    ((uint32_t)0x20000000)        /*!<Bit 2 */
+
+/******************  Bit definition for ADC_JOFR1 register  *******************/
+#define  ADC_JOFR1_JOFFSET1                  ((uint32_t)0x0FFF)            /*!<Data offset for injected channel 1 */
+
+/******************  Bit definition for ADC_JOFR2 register  *******************/
+#define  ADC_JOFR2_JOFFSET2                  ((uint32_t)0x0FFF)            /*!<Data offset for injected channel 2 */
+
+/******************  Bit definition for ADC_JOFR3 register  *******************/
+#define  ADC_JOFR3_JOFFSET3                  ((uint32_t)0x0FFF)            /*!<Data offset for injected channel 3 */
+
+/******************  Bit definition for ADC_JOFR4 register  *******************/
+#define  ADC_JOFR4_JOFFSET4                  ((uint32_t)0x0FFF)            /*!<Data offset for injected channel 4 */
+
+/*******************  Bit definition for ADC_HTR register  ********************/
+#define  ADC_HTR_HT                          ((uint32_t)0x0FFF)            /*!<Analog watchdog high threshold */
+
+/*******************  Bit definition for ADC_LTR register  ********************/
+#define  ADC_LTR_LT                          ((uint32_t)0x0FFF)            /*!<Analog watchdog low threshold */
+
+/*******************  Bit definition for ADC_SQR1 register  *******************/
+#define  ADC_SQR1_SQ13                       ((uint32_t)0x0000001F)        /*!<SQ13[4:0] bits (13th conversion in regular sequence) */
+#define  ADC_SQR1_SQ13_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SQR1_SQ13_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SQR1_SQ13_2                     ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SQR1_SQ13_3                     ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_SQR1_SQ13_4                     ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_SQR1_SQ14                       ((uint32_t)0x000003E0)        /*!<SQ14[4:0] bits (14th conversion in regular sequence) */
+#define  ADC_SQR1_SQ14_0                     ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  ADC_SQR1_SQ14_1                     ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  ADC_SQR1_SQ14_2                     ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  ADC_SQR1_SQ14_3                     ((uint32_t)0x00000100)        /*!<Bit 3 */
+#define  ADC_SQR1_SQ14_4                     ((uint32_t)0x00000200)        /*!<Bit 4 */
+#define  ADC_SQR1_SQ15                       ((uint32_t)0x00007C00)        /*!<SQ15[4:0] bits (15th conversion in regular sequence) */
+#define  ADC_SQR1_SQ15_0                     ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  ADC_SQR1_SQ15_1                     ((uint32_t)0x00000800)        /*!<Bit 1 */
+#define  ADC_SQR1_SQ15_2                     ((uint32_t)0x00001000)        /*!<Bit 2 */
+#define  ADC_SQR1_SQ15_3                     ((uint32_t)0x00002000)        /*!<Bit 3 */
+#define  ADC_SQR1_SQ15_4                     ((uint32_t)0x00004000)        /*!<Bit 4 */
+#define  ADC_SQR1_SQ16                       ((uint32_t)0x000F8000)        /*!<SQ16[4:0] bits (16th conversion in regular sequence) */
+#define  ADC_SQR1_SQ16_0                     ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SQR1_SQ16_1                     ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SQR1_SQ16_2                     ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SQR1_SQ16_3                     ((uint32_t)0x00040000)        /*!<Bit 3 */
+#define  ADC_SQR1_SQ16_4                     ((uint32_t)0x00080000)        /*!<Bit 4 */
+#define  ADC_SQR1_L                          ((uint32_t)0x00F00000)        /*!<L[3:0] bits (Regular channel sequence length) */
+#define  ADC_SQR1_L_0                        ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_SQR1_L_1                        ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  ADC_SQR1_L_2                        ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  ADC_SQR1_L_3                        ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+/*******************  Bit definition for ADC_SQR2 register  *******************/
+#define  ADC_SQR2_SQ7                        ((uint32_t)0x0000001F)        /*!<SQ7[4:0] bits (7th conversion in regular sequence) */
+#define  ADC_SQR2_SQ7_0                      ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ7_1                      ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ7_2                      ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ7_3                      ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ7_4                      ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ8                        ((uint32_t)0x000003E0)        /*!<SQ8[4:0] bits (8th conversion in regular sequence) */
+#define  ADC_SQR2_SQ8_0                      ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ8_1                      ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ8_2                      ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ8_3                      ((uint32_t)0x00000100)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ8_4                      ((uint32_t)0x00000200)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ9                        ((uint32_t)0x00007C00)        /*!<SQ9[4:0] bits (9th conversion in regular sequence) */
+#define  ADC_SQR2_SQ9_0                      ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ9_1                      ((uint32_t)0x00000800)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ9_2                      ((uint32_t)0x00001000)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ9_3                      ((uint32_t)0x00002000)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ9_4                      ((uint32_t)0x00004000)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ10                       ((uint32_t)0x000F8000)        /*!<SQ10[4:0] bits (10th conversion in regular sequence) */
+#define  ADC_SQR2_SQ10_0                     ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ10_1                     ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ10_2                     ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ10_3                     ((uint32_t)0x00040000)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ10_4                     ((uint32_t)0x00080000)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ11                       ((uint32_t)0x01F00000)        /*!<SQ11[4:0] bits (11th conversion in regular sequence) */
+#define  ADC_SQR2_SQ11_0                     ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ11_1                     ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ11_2                     ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ11_3                     ((uint32_t)0x00800000)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ11_4                     ((uint32_t)0x01000000)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ12                       ((uint32_t)0x3E000000)        /*!<SQ12[4:0] bits (12th conversion in regular sequence) */
+#define  ADC_SQR2_SQ12_0                     ((uint32_t)0x02000000)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ12_1                     ((uint32_t)0x04000000)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ12_2                     ((uint32_t)0x08000000)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ12_3                     ((uint32_t)0x10000000)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ12_4                     ((uint32_t)0x20000000)        /*!<Bit 4 */
+
+/*******************  Bit definition for ADC_SQR3 register  *******************/
+#define  ADC_SQR3_SQ1                        ((uint32_t)0x0000001F)        /*!<SQ1[4:0] bits (1st conversion in regular sequence) */
+#define  ADC_SQR3_SQ1_0                      ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ1_1                      ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ1_2                      ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ1_3                      ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ1_4                      ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ2                        ((uint32_t)0x000003E0)        /*!<SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define  ADC_SQR3_SQ2_0                      ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ2_1                      ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ2_2                      ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ2_3                      ((uint32_t)0x00000100)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ2_4                      ((uint32_t)0x00000200)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ3                        ((uint32_t)0x00007C00)        /*!<SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define  ADC_SQR3_SQ3_0                      ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ3_1                      ((uint32_t)0x00000800)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ3_2                      ((uint32_t)0x00001000)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ3_3                      ((uint32_t)0x00002000)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ3_4                      ((uint32_t)0x00004000)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ4                        ((uint32_t)0x000F8000)        /*!<SQ4[4:0] bits (4th conversion in regular sequence) */
+#define  ADC_SQR3_SQ4_0                      ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ4_1                      ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ4_2                      ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ4_3                      ((uint32_t)0x00040000)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ4_4                      ((uint32_t)0x00080000)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ5                        ((uint32_t)0x01F00000)        /*!<SQ5[4:0] bits (5th conversion in regular sequence) */
+#define  ADC_SQR3_SQ5_0                      ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ5_1                      ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ5_2                      ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ5_3                      ((uint32_t)0x00800000)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ5_4                      ((uint32_t)0x01000000)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ6                        ((uint32_t)0x3E000000)        /*!<SQ6[4:0] bits (6th conversion in regular sequence) */
+#define  ADC_SQR3_SQ6_0                      ((uint32_t)0x02000000)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ6_1                      ((uint32_t)0x04000000)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ6_2                      ((uint32_t)0x08000000)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ6_3                      ((uint32_t)0x10000000)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ6_4                      ((uint32_t)0x20000000)        /*!<Bit 4 */
+
+/*******************  Bit definition for ADC_JSQR register  *******************/
+#define  ADC_JSQR_JSQ1                       ((uint32_t)0x0000001F)        /*!<JSQ1[4:0] bits (1st conversion in injected sequence) */  
+#define  ADC_JSQR_JSQ1_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_JSQR_JSQ1_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_JSQR_JSQ1_2                     ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_JSQR_JSQ1_3                     ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_JSQR_JSQ1_4                     ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_JSQR_JSQ2                       ((uint32_t)0x000003E0)        /*!<JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define  ADC_JSQR_JSQ2_0                     ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  ADC_JSQR_JSQ2_1                     ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  ADC_JSQR_JSQ2_2                     ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  ADC_JSQR_JSQ2_3                     ((uint32_t)0x00000100)        /*!<Bit 3 */
+#define  ADC_JSQR_JSQ2_4                     ((uint32_t)0x00000200)        /*!<Bit 4 */
+#define  ADC_JSQR_JSQ3                       ((uint32_t)0x00007C00)        /*!<JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define  ADC_JSQR_JSQ3_0                     ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  ADC_JSQR_JSQ3_1                     ((uint32_t)0x00000800)        /*!<Bit 1 */
+#define  ADC_JSQR_JSQ3_2                     ((uint32_t)0x00001000)        /*!<Bit 2 */
+#define  ADC_JSQR_JSQ3_3                     ((uint32_t)0x00002000)        /*!<Bit 3 */
+#define  ADC_JSQR_JSQ3_4                     ((uint32_t)0x00004000)        /*!<Bit 4 */
+#define  ADC_JSQR_JSQ4                       ((uint32_t)0x000F8000)        /*!<JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define  ADC_JSQR_JSQ4_0                     ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_JSQR_JSQ4_1                     ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_JSQR_JSQ4_2                     ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_JSQR_JSQ4_3                     ((uint32_t)0x00040000)        /*!<Bit 3 */
+#define  ADC_JSQR_JSQ4_4                     ((uint32_t)0x00080000)        /*!<Bit 4 */
+#define  ADC_JSQR_JL                         ((uint32_t)0x00300000)        /*!<JL[1:0] bits (Injected Sequence length) */
+#define  ADC_JSQR_JL_0                       ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_JSQR_JL_1                       ((uint32_t)0x00200000)        /*!<Bit 1 */
+
+/*******************  Bit definition for ADC_JDR1 register  *******************/
+#define  ADC_JDR1_JDATA                      ((uint16_t)0xFFFF)            /*!<Injected data */
+
+/*******************  Bit definition for ADC_JDR2 register  *******************/
+#define  ADC_JDR2_JDATA                      ((uint16_t)0xFFFF)            /*!<Injected data */
+
+/*******************  Bit definition for ADC_JDR3 register  *******************/
+#define  ADC_JDR3_JDATA                      ((uint16_t)0xFFFF)            /*!<Injected data */
+
+/*******************  Bit definition for ADC_JDR4 register  *******************/
+#define  ADC_JDR4_JDATA                      ((uint16_t)0xFFFF)            /*!<Injected data */
+
+/********************  Bit definition for ADC_DR register  ********************/
+#define  ADC_DR_DATA                         ((uint32_t)0x0000FFFF)        /*!<Regular data */
+#define  ADC_DR_ADC2DATA                     ((uint32_t)0xFFFF0000)        /*!<ADC2 data */
+
+/*******************  Bit definition for ADC_CSR register  ********************/
+#define  ADC_CSR_AWD1                        ((uint32_t)0x00000001)        /*!<ADC1 Analog watchdog flag               */
+#define  ADC_CSR_EOC1                        ((uint32_t)0x00000002)        /*!<ADC1 End of conversion                  */
+#define  ADC_CSR_JEOC1                       ((uint32_t)0x00000004)        /*!<ADC1 Injected channel end of conversion */
+#define  ADC_CSR_JSTRT1                      ((uint32_t)0x00000008)        /*!<ADC1 Injected channel Start flag        */
+#define  ADC_CSR_STRT1                       ((uint32_t)0x00000010)        /*!<ADC1 Regular channel Start flag         */
+#define  ADC_CSR_DOVR1                       ((uint32_t)0x00000020)        /*!<ADC1 DMA overrun  flag                  */
+#define  ADC_CSR_AWD2                        ((uint32_t)0x00000100)        /*!<ADC2 Analog watchdog flag               */
+#define  ADC_CSR_EOC2                        ((uint32_t)0x00000200)        /*!<ADC2 End of conversion                  */
+#define  ADC_CSR_JEOC2                       ((uint32_t)0x00000400)        /*!<ADC2 Injected channel end of conversion */
+#define  ADC_CSR_JSTRT2                      ((uint32_t)0x00000800)        /*!<ADC2 Injected channel Start flag        */
+#define  ADC_CSR_STRT2                       ((uint32_t)0x00001000)        /*!<ADC2 Regular channel Start flag         */
+#define  ADC_CSR_DOVR2                       ((uint32_t)0x00002000)        /*!<ADC2 DMA overrun  flag                  */
+#define  ADC_CSR_AWD3                        ((uint32_t)0x00010000)        /*!<ADC3 Analog watchdog flag               */
+#define  ADC_CSR_EOC3                        ((uint32_t)0x00020000)        /*!<ADC3 End of conversion                  */
+#define  ADC_CSR_JEOC3                       ((uint32_t)0x00040000)        /*!<ADC3 Injected channel end of conversion */
+#define  ADC_CSR_JSTRT3                      ((uint32_t)0x00080000)        /*!<ADC3 Injected channel Start flag        */
+#define  ADC_CSR_STRT3                       ((uint32_t)0x00100000)        /*!<ADC3 Regular channel Start flag         */
+#define  ADC_CSR_DOVR3                       ((uint32_t)0x00200000)        /*!<ADC3 DMA overrun  flag                  */
+
+/*******************  Bit definition for ADC_CCR register  ********************/
+#define  ADC_CCR_MULTI                       ((uint32_t)0x0000001F)        /*!<MULTI[4:0] bits (Multi-ADC mode selection) */  
+#define  ADC_CCR_MULTI_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_CCR_MULTI_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_CCR_MULTI_2                     ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_CCR_MULTI_3                     ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_CCR_MULTI_4                     ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_CCR_DELAY                       ((uint32_t)0x00000F00)        /*!<DELAY[3:0] bits (Delay between 2 sampling phases) */  
+#define  ADC_CCR_DELAY_0                     ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  ADC_CCR_DELAY_1                     ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  ADC_CCR_DELAY_2                     ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  ADC_CCR_DELAY_3                     ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  ADC_CCR_DDS                         ((uint32_t)0x00002000)        /*!<DMA disable selection (Multi-ADC mode) */
+#define  ADC_CCR_DMA                         ((uint32_t)0x0000C000)        /*!<DMA[1:0] bits (Direct Memory Access mode for multimode) */  
+#define  ADC_CCR_DMA_0                       ((uint32_t)0x00004000)        /*!<Bit 0 */
+#define  ADC_CCR_DMA_1                       ((uint32_t)0x00008000)        /*!<Bit 1 */
+#define  ADC_CCR_ADCPRE                      ((uint32_t)0x00030000)        /*!<ADCPRE[1:0] bits (ADC prescaler) */  
+#define  ADC_CCR_ADCPRE_0                    ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  ADC_CCR_ADCPRE_1                    ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  ADC_CCR_VBATE                       ((uint32_t)0x00400000)        /*!<VBAT Enable */
+#define  ADC_CCR_TSVREFE                     ((uint32_t)0x00800000)        /*!<Temperature Sensor and VREFINT Enable */
+
+/*******************  Bit definition for ADC_CDR register  ********************/
+#define  ADC_CDR_DATA1                      ((uint32_t)0x0000FFFF)         /*!<1st data of a pair of regular conversions */
+#define  ADC_CDR_DATA2                      ((uint32_t)0xFFFF0000)         /*!<2nd data of a pair of regular conversions */
+
+/******************************************************************************/
+/*                                                                            */
+/*                         Controller Area Network                            */
+/*                                                                            */
+/******************************************************************************/
+/*!<CAN control and status registers */
+/*******************  Bit definition for CAN_MCR register  ********************/
+#define  CAN_MCR_INRQ                        ((uint32_t)0x00000001)        /*!<Initialization Request            */
+#define  CAN_MCR_SLEEP                       ((uint32_t)0x00000002)        /*!<Sleep Mode Request                */
+#define  CAN_MCR_TXFP                        ((uint32_t)0x00000004)        /*!<Transmit FIFO Priority            */
+#define  CAN_MCR_RFLM                        ((uint32_t)0x00000008)        /*!<Receive FIFO Locked Mode          */
+#define  CAN_MCR_NART                        ((uint32_t)0x00000010)        /*!<No Automatic Retransmission       */
+#define  CAN_MCR_AWUM                        ((uint32_t)0x00000020)        /*!<Automatic Wakeup Mode             */
+#define  CAN_MCR_ABOM                        ((uint32_t)0x00000040)        /*!<Automatic Bus-Off Management      */
+#define  CAN_MCR_TTCM                        ((uint32_t)0x00000080)        /*!<Time Triggered Communication Mode */
+#define  CAN_MCR_RESET                       ((uint32_t)0x00008000)        /*!<bxCAN software master reset       */
+                                                                           
+/*******************  Bit definition for CAN_MSR register  ********************/
+#define  CAN_MSR_INAK                        ((uint32_t)0x00000001)        /*!<Initialization Acknowledge  */
+#define  CAN_MSR_SLAK                        ((uint32_t)0x00000002)        /*!<Sleep Acknowledge           */
+#define  CAN_MSR_ERRI                        ((uint32_t)0x00000004)        /*!<Error Interrupt             */
+#define  CAN_MSR_WKUI                        ((uint32_t)0x00000008)        /*!<Wakeup Interrupt            */
+#define  CAN_MSR_SLAKI                       ((uint32_t)0x00000010)        /*!<Sleep Acknowledge Interrupt */
+#define  CAN_MSR_TXM                         ((uint32_t)0x00000100)        /*!<Transmit Mode               */
+#define  CAN_MSR_RXM                         ((uint32_t)0x00000200)        /*!<Receive Mode                */
+#define  CAN_MSR_SAMP                        ((uint32_t)0x00000400)        /*!<Last Sample Point           */
+#define  CAN_MSR_RX                          ((uint32_t)0x00000800)        /*!<CAN Rx Signal               */
+
+/*******************  Bit definition for CAN_TSR register  ********************/
+#define  CAN_TSR_RQCP0                       ((uint32_t)0x00000001)        /*!<Request Completed Mailbox0      */
+#define  CAN_TSR_TXOK0                       ((uint32_t)0x00000002)        /*!<Transmission OK of Mailbox0     */
+#define  CAN_TSR_ALST0                       ((uint32_t)0x00000004)        /*!<Arbitration Lost for Mailbox0   */
+#define  CAN_TSR_TERR0                       ((uint32_t)0x00000008)        /*!<Transmission Error of Mailbox0  */
+#define  CAN_TSR_ABRQ0                       ((uint32_t)0x00000080)        /*!<Abort Request for Mailbox0      */
+#define  CAN_TSR_RQCP1                       ((uint32_t)0x00000100)        /*!<Request Completed Mailbox1      */
+#define  CAN_TSR_TXOK1                       ((uint32_t)0x00000200)        /*!<Transmission OK of Mailbox1     */
+#define  CAN_TSR_ALST1                       ((uint32_t)0x00000400)        /*!<Arbitration Lost for Mailbox1   */
+#define  CAN_TSR_TERR1                       ((uint32_t)0x00000800)        /*!<Transmission Error of Mailbox1  */
+#define  CAN_TSR_ABRQ1                       ((uint32_t)0x00008000)        /*!<Abort Request for Mailbox 1     */
+#define  CAN_TSR_RQCP2                       ((uint32_t)0x00010000)        /*!<Request Completed Mailbox2      */
+#define  CAN_TSR_TXOK2                       ((uint32_t)0x00020000)        /*!<Transmission OK of Mailbox 2    */
+#define  CAN_TSR_ALST2                       ((uint32_t)0x00040000)        /*!<Arbitration Lost for mailbox 2  */
+#define  CAN_TSR_TERR2                       ((uint32_t)0x00080000)        /*!<Transmission Error of Mailbox 2 */
+#define  CAN_TSR_ABRQ2                       ((uint32_t)0x00800000)        /*!<Abort Request for Mailbox 2     */
+#define  CAN_TSR_CODE                        ((uint32_t)0x03000000)        /*!<Mailbox Code                    */
+
+#define  CAN_TSR_TME                         ((uint32_t)0x1C000000)        /*!<TME[2:0] bits */
+#define  CAN_TSR_TME0                        ((uint32_t)0x04000000)        /*!<Transmit Mailbox 0 Empty */
+#define  CAN_TSR_TME1                        ((uint32_t)0x08000000)        /*!<Transmit Mailbox 1 Empty */
+#define  CAN_TSR_TME2                        ((uint32_t)0x10000000)        /*!<Transmit Mailbox 2 Empty */
+
+#define  CAN_TSR_LOW                         ((uint32_t)0xE0000000)        /*!<LOW[2:0] bits */
+#define  CAN_TSR_LOW0                        ((uint32_t)0x20000000)        /*!<Lowest Priority Flag for Mailbox 0 */
+#define  CAN_TSR_LOW1                        ((uint32_t)0x40000000)        /*!<Lowest Priority Flag for Mailbox 1 */
+#define  CAN_TSR_LOW2                        ((uint32_t)0x80000000)        /*!<Lowest Priority Flag for Mailbox 2 */
+
+/*******************  Bit definition for CAN_RF0R register  *******************/
+#define  CAN_RF0R_FMP0                       ((uint32_t)0x00000003)        /*!<FIFO 0 Message Pending        */
+#define  CAN_RF0R_FULL0                      ((uint32_t)0x00000008)        /*!<FIFO 0 Full                   */
+#define  CAN_RF0R_FOVR0                      ((uint32_t)0x00000010)        /*!<FIFO 0 Overrun                */
+#define  CAN_RF0R_RFOM0                      ((uint32_t)0x00000020)        /*!<Release FIFO 0 Output Mailbox */
+
+/*******************  Bit definition for CAN_RF1R register  *******************/
+#define  CAN_RF1R_FMP1                       ((uint32_t)0x00000003)        /*!<FIFO 1 Message Pending        */
+#define  CAN_RF1R_FULL1                      ((uint32_t)0x00000008)        /*!<FIFO 1 Full                   */
+#define  CAN_RF1R_FOVR1                      ((uint32_t)0x00000010)        /*!<FIFO 1 Overrun                */
+#define  CAN_RF1R_RFOM1                      ((uint32_t)0x00000020)        /*!<Release FIFO 1 Output Mailbox */
+
+/********************  Bit definition for CAN_IER register  *******************/
+#define  CAN_IER_TMEIE                       ((uint32_t)0x00000001)        /*!<Transmit Mailbox Empty Interrupt Enable */
+#define  CAN_IER_FMPIE0                      ((uint32_t)0x00000002)        /*!<FIFO Message Pending Interrupt Enable   */
+#define  CAN_IER_FFIE0                       ((uint32_t)0x00000004)        /*!<FIFO Full Interrupt Enable              */
+#define  CAN_IER_FOVIE0                      ((uint32_t)0x00000008)        /*!<FIFO Overrun Interrupt Enable           */
+#define  CAN_IER_FMPIE1                      ((uint32_t)0x00000010)        /*!<FIFO Message Pending Interrupt Enable   */
+#define  CAN_IER_FFIE1                       ((uint32_t)0x00000020)        /*!<FIFO Full Interrupt Enable              */
+#define  CAN_IER_FOVIE1                      ((uint32_t)0x00000040)        /*!<FIFO Overrun Interrupt Enable           */
+#define  CAN_IER_EWGIE                       ((uint32_t)0x00000100)        /*!<Error Warning Interrupt Enable          */
+#define  CAN_IER_EPVIE                       ((uint32_t)0x00000200)        /*!<Error Passive Interrupt Enable          */
+#define  CAN_IER_BOFIE                       ((uint32_t)0x00000400)        /*!<Bus-Off Interrupt Enable                */
+#define  CAN_IER_LECIE                       ((uint32_t)0x00000800)        /*!<Last Error Code Interrupt Enable        */
+#define  CAN_IER_ERRIE                       ((uint32_t)0x00008000)        /*!<Error Interrupt Enable                  */
+#define  CAN_IER_WKUIE                       ((uint32_t)0x00010000)        /*!<Wakeup Interrupt Enable                 */
+#define  CAN_IER_SLKIE                       ((uint32_t)0x00020000)        /*!<Sleep Interrupt Enable                  */
+
+/********************  Bit definition for CAN_ESR register  *******************/
+#define  CAN_ESR_EWGF                        ((uint32_t)0x00000001)        /*!<Error Warning Flag */
+#define  CAN_ESR_EPVF                        ((uint32_t)0x00000002)        /*!<Error Passive Flag */
+#define  CAN_ESR_BOFF                        ((uint32_t)0x00000004)        /*!<Bus-Off Flag */
+
+#define  CAN_ESR_LEC                         ((uint32_t)0x00000070)        /*!<LEC[2:0] bits (Last Error Code) */
+#define  CAN_ESR_LEC_0                       ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  CAN_ESR_LEC_1                       ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  CAN_ESR_LEC_2                       ((uint32_t)0x00000040)        /*!<Bit 2 */
+
+#define  CAN_ESR_TEC                         ((uint32_t)0x00FF0000)        /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define  CAN_ESR_REC                         ((uint32_t)0xFF000000)        /*!<Receive Error Counter */
+
+/*******************  Bit definition for CAN_BTR register  ********************/
+#define  CAN_BTR_BRP                         ((uint32_t)0x000003FF)        /*!<Baud Rate Prescaler           */
+#define  CAN_BTR_TS1                         ((uint32_t)0x000F0000)        /*!<Time Segment 1                */
+#define  CAN_BTR_TS1_0                       ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  CAN_BTR_TS1_1                       ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  CAN_BTR_TS1_2                       ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  CAN_BTR_TS1_3                       ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  CAN_BTR_TS2                         ((uint32_t)0x00700000)        /*!<Time Segment 2                */
+#define  CAN_BTR_TS2_0                       ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  CAN_BTR_TS2_1                       ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  CAN_BTR_TS2_2                       ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  CAN_BTR_SJW                         ((uint32_t)0x03000000)        /*!<Resynchronization Jump Width  */
+#define  CAN_BTR_SJW_0                       ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  CAN_BTR_SJW_1                       ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  CAN_BTR_LBKM                        ((uint32_t)0x40000000)        /*!<Loop Back Mode (Debug)        */
+#define  CAN_BTR_SILM                        ((uint32_t)0x80000000)        /*!<Silent Mode                   */
+
+/*!<Mailbox registers */
+/******************  Bit definition for CAN_TI0R register  ********************/
+#define  CAN_TI0R_TXRQ                       ((uint32_t)0x00000001)        /*!<Transmit Mailbox Request                   */
+#define  CAN_TI0R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request                */
+#define  CAN_TI0R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension                       */
+#define  CAN_TI0R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended Identifier                        */
+#define  CAN_TI0R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/******************  Bit definition for CAN_TDT0R register  *******************/
+#define  CAN_TDT0R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code     */
+#define  CAN_TDT0R_TGT                       ((uint32_t)0x00000100)        /*!<Transmit Global Time */
+#define  CAN_TDT0R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp   */
+
+/******************  Bit definition for CAN_TDL0R register  *******************/
+#define  CAN_TDL0R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_TDL0R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_TDL0R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_TDL0R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/******************  Bit definition for CAN_TDH0R register  *******************/
+#define  CAN_TDH0R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_TDH0R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_TDH0R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_TDH0R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*******************  Bit definition for CAN_TI1R register  *******************/
+#define  CAN_TI1R_TXRQ                       ((uint32_t)0x00000001)        /*!<Transmit Mailbox Request                   */
+#define  CAN_TI1R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request                */
+#define  CAN_TI1R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension                       */
+#define  CAN_TI1R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended Identifier                        */
+#define  CAN_TI1R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_TDT1R register  ******************/
+#define  CAN_TDT1R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code     */
+#define  CAN_TDT1R_TGT                       ((uint32_t)0x00000100)        /*!<Transmit Global Time */
+#define  CAN_TDT1R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp   */
+
+/*******************  Bit definition for CAN_TDL1R register  ******************/
+#define  CAN_TDL1R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_TDL1R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_TDL1R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_TDL1R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/*******************  Bit definition for CAN_TDH1R register  ******************/
+#define  CAN_TDH1R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_TDH1R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_TDH1R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_TDH1R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*******************  Bit definition for CAN_TI2R register  *******************/
+#define  CAN_TI2R_TXRQ                       ((uint32_t)0x00000001)        /*!<Transmit Mailbox Request                   */
+#define  CAN_TI2R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request                */
+#define  CAN_TI2R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension                       */
+#define  CAN_TI2R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended identifier                        */
+#define  CAN_TI2R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_TDT2R register  ******************/  
+#define  CAN_TDT2R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code      */
+#define  CAN_TDT2R_TGT                       ((uint32_t)0x00000100)        /*!<Transmit Global Time  */
+#define  CAN_TDT2R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp    */
+
+/*******************  Bit definition for CAN_TDL2R register  ******************/
+#define  CAN_TDL2R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_TDL2R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_TDL2R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_TDL2R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/*******************  Bit definition for CAN_TDH2R register  ******************/
+#define  CAN_TDH2R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_TDH2R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_TDH2R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_TDH2R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*******************  Bit definition for CAN_RI0R register  *******************/
+#define  CAN_RI0R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request                */
+#define  CAN_RI0R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension                       */
+#define  CAN_RI0R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended Identifier                        */
+#define  CAN_RI0R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_RDT0R register  ******************/
+#define  CAN_RDT0R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code */
+#define  CAN_RDT0R_FMI                       ((uint32_t)0x0000FF00)        /*!<Filter Match Index */
+#define  CAN_RDT0R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp */
+
+/*******************  Bit definition for CAN_RDL0R register  ******************/
+#define  CAN_RDL0R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_RDL0R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_RDL0R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_RDL0R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/*******************  Bit definition for CAN_RDH0R register  ******************/
+#define  CAN_RDH0R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_RDH0R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_RDH0R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_RDH0R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*******************  Bit definition for CAN_RI1R register  *******************/
+#define  CAN_RI1R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request                */
+#define  CAN_RI1R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension                       */
+#define  CAN_RI1R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended identifier                        */
+#define  CAN_RI1R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_RDT1R register  ******************/
+#define  CAN_RDT1R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code   */
+#define  CAN_RDT1R_FMI                       ((uint32_t)0x0000FF00)        /*!<Filter Match Index */
+#define  CAN_RDT1R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp */
+
+/*******************  Bit definition for CAN_RDL1R register  ******************/
+#define  CAN_RDL1R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_RDL1R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_RDL1R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_RDL1R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/*******************  Bit definition for CAN_RDH1R register  ******************/
+#define  CAN_RDH1R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_RDH1R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_RDH1R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_RDH1R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/*******************  Bit definition for CAN_FMR register  ********************/
+#define  CAN_FMR_FINIT                       ((uint8_t)0x01)               /*!<Filter Init Mode */
+#define  CAN_FMR_CAN2SB                      ((uint32_t)0x00003F00)        /*!<CAN2 start bank */
+
+/*******************  Bit definition for CAN_FM1R register  *******************/
+#define  CAN_FM1R_FBM                        ((uint32_t)0x3FFF)            /*!<Filter Mode */
+#define  CAN_FM1R_FBM0                       ((uint32_t)0x0001)            /*!<Filter Init Mode bit 0  */
+#define  CAN_FM1R_FBM1                       ((uint32_t)0x0002)            /*!<Filter Init Mode bit 1  */
+#define  CAN_FM1R_FBM2                       ((uint32_t)0x0004)            /*!<Filter Init Mode bit 2  */
+#define  CAN_FM1R_FBM3                       ((uint32_t)0x0008)            /*!<Filter Init Mode bit 3  */
+#define  CAN_FM1R_FBM4                       ((uint32_t)0x0010)            /*!<Filter Init Mode bit 4  */
+#define  CAN_FM1R_FBM5                       ((uint32_t)0x0020)            /*!<Filter Init Mode bit 5  */
+#define  CAN_FM1R_FBM6                       ((uint32_t)0x0040)            /*!<Filter Init Mode bit 6  */
+#define  CAN_FM1R_FBM7                       ((uint32_t)0x0080)            /*!<Filter Init Mode bit 7  */
+#define  CAN_FM1R_FBM8                       ((uint32_t)0x0100)            /*!<Filter Init Mode bit 8  */
+#define  CAN_FM1R_FBM9                       ((uint32_t)0x0200)            /*!<Filter Init Mode bit 9  */
+#define  CAN_FM1R_FBM10                      ((uint32_t)0x0400)            /*!<Filter Init Mode bit 10 */
+#define  CAN_FM1R_FBM11                      ((uint32_t)0x0800)            /*!<Filter Init Mode bit 11 */
+#define  CAN_FM1R_FBM12                      ((uint32_t)0x1000)            /*!<Filter Init Mode bit 12 */
+#define  CAN_FM1R_FBM13                      ((uint32_t)0x2000)            /*!<Filter Init Mode bit 13 */
+
+/*******************  Bit definition for CAN_FS1R register  *******************/
+#define  CAN_FS1R_FSC                        ((uint32_t)0x00003FFF)        /*!<Filter Scale Configuration        */
+#define  CAN_FS1R_FSC0                       ((uint32_t)0x00000001)        /*!<Filter Scale Configuration bit 0  */
+#define  CAN_FS1R_FSC1                       ((uint32_t)0x00000002)        /*!<Filter Scale Configuration bit 1  */
+#define  CAN_FS1R_FSC2                       ((uint32_t)0x00000004)        /*!<Filter Scale Configuration bit 2  */
+#define  CAN_FS1R_FSC3                       ((uint32_t)0x00000008)        /*!<Filter Scale Configuration bit 3  */
+#define  CAN_FS1R_FSC4                       ((uint32_t)0x00000010)        /*!<Filter Scale Configuration bit 4  */
+#define  CAN_FS1R_FSC5                       ((uint32_t)0x00000020)        /*!<Filter Scale Configuration bit 5  */
+#define  CAN_FS1R_FSC6                       ((uint32_t)0x00000040)        /*!<Filter Scale Configuration bit 6  */
+#define  CAN_FS1R_FSC7                       ((uint32_t)0x00000080)        /*!<Filter Scale Configuration bit 7  */
+#define  CAN_FS1R_FSC8                       ((uint32_t)0x00000100)        /*!<Filter Scale Configuration bit 8  */
+#define  CAN_FS1R_FSC9                       ((uint32_t)0x00000200)        /*!<Filter Scale Configuration bit 9  */
+#define  CAN_FS1R_FSC10                      ((uint32_t)0x00000400)        /*!<Filter Scale Configuration bit 10 */
+#define  CAN_FS1R_FSC11                      ((uint32_t)0x00000800)        /*!<Filter Scale Configuration bit 11 */
+#define  CAN_FS1R_FSC12                      ((uint32_t)0x00001000)        /*!<Filter Scale Configuration bit 12 */
+#define  CAN_FS1R_FSC13                      ((uint32_t)0x00002000)        /*!<Filter Scale Configuration bit 13 */
+
+/******************  Bit definition for CAN_FFA1R register  *******************/
+#define  CAN_FFA1R_FFA                       ((uint32_t)0x00003FFF)        /*!<Filter FIFO Assignment */
+#define  CAN_FFA1R_FFA0                      ((uint32_t)0x00000001)        /*!<Filter FIFO Assignment for Filter 0 */
+#define  CAN_FFA1R_FFA1                      ((uint32_t)0x00000002)        /*!<Filter FIFO Assignment for Filter 1 */
+#define  CAN_FFA1R_FFA2                      ((uint32_t)0x00000004)        /*!<Filter FIFO Assignment for Filter 2 */
+#define  CAN_FFA1R_FFA3                      ((uint32_t)0x00000008)        /*!<Filter FIFO Assignment for Filter 3 */
+#define  CAN_FFA1R_FFA4                      ((uint32_t)0x00000010)        /*!<Filter FIFO Assignment for Filter 4 */
+#define  CAN_FFA1R_FFA5                      ((uint32_t)0x00000020)        /*!<Filter FIFO Assignment for Filter 5 */
+#define  CAN_FFA1R_FFA6                      ((uint32_t)0x00000040)        /*!<Filter FIFO Assignment for Filter 6 */
+#define  CAN_FFA1R_FFA7                      ((uint32_t)0x00000080)        /*!<Filter FIFO Assignment for Filter 7 */
+#define  CAN_FFA1R_FFA8                      ((uint32_t)0x00000100)        /*!<Filter FIFO Assignment for Filter 8 */
+#define  CAN_FFA1R_FFA9                      ((uint32_t)0x00000200)        /*!<Filter FIFO Assignment for Filter 9 */
+#define  CAN_FFA1R_FFA10                     ((uint32_t)0x00000400)        /*!<Filter FIFO Assignment for Filter 10 */
+#define  CAN_FFA1R_FFA11                     ((uint32_t)0x00000800)        /*!<Filter FIFO Assignment for Filter 11 */
+#define  CAN_FFA1R_FFA12                     ((uint32_t)0x00001000)        /*!<Filter FIFO Assignment for Filter 12 */
+#define  CAN_FFA1R_FFA13                     ((uint32_t)0x00002000)        /*!<Filter FIFO Assignment for Filter 13 */
+
+/*******************  Bit definition for CAN_FA1R register  *******************/
+#define  CAN_FA1R_FACT                       ((uint32_t)0x00003FFF)        /*!<Filter Active    */
+#define  CAN_FA1R_FACT0                      ((uint32_t)0x00000001)        /*!<Filter 0 Active  */
+#define  CAN_FA1R_FACT1                      ((uint32_t)0x00000002)        /*!<Filter 1 Active  */
+#define  CAN_FA1R_FACT2                      ((uint32_t)0x00000004)        /*!<Filter 2 Active  */
+#define  CAN_FA1R_FACT3                      ((uint32_t)0x00000008)        /*!<Filter 3 Active  */
+#define  CAN_FA1R_FACT4                      ((uint32_t)0x00000010)        /*!<Filter 4 Active  */
+#define  CAN_FA1R_FACT5                      ((uint32_t)0x00000020)        /*!<Filter 5 Active  */
+#define  CAN_FA1R_FACT6                      ((uint32_t)0x00000040)        /*!<Filter 6 Active  */
+#define  CAN_FA1R_FACT7                      ((uint32_t)0x00000080)        /*!<Filter 7 Active  */
+#define  CAN_FA1R_FACT8                      ((uint32_t)0x00000100)        /*!<Filter 8 Active  */
+#define  CAN_FA1R_FACT9                      ((uint32_t)0x00000200)        /*!<Filter 9 Active  */
+#define  CAN_FA1R_FACT10                     ((uint32_t)0x00000400)        /*!<Filter 10 Active */
+#define  CAN_FA1R_FACT11                     ((uint32_t)0x00000800)        /*!<Filter 11 Active */
+#define  CAN_FA1R_FACT12                     ((uint32_t)0x00001000)        /*!<Filter 12 Active */
+#define  CAN_FA1R_FACT13                     ((uint32_t)0x00002000)        /*!<Filter 13 Active */
+
+/*******************  Bit definition for CAN_F0R1 register  *******************/
+#define  CAN_F0R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F0R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F0R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F0R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F0R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F0R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F0R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F0R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F0R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F0R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F0R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F0R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F0R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F0R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F0R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F0R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F0R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F0R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F0R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F0R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F0R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F0R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F0R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F0R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F0R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F0R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F0R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F0R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F0R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F0R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F0R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F0R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F1R1 register  *******************/
+#define  CAN_F1R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F1R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F1R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F1R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F1R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F1R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F1R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F1R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F1R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F1R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F1R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F1R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F1R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F1R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F1R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F1R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F1R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F1R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F1R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F1R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F1R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F1R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F1R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F1R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F1R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F1R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F1R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F1R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F1R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F1R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F1R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F1R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F2R1 register  *******************/
+#define  CAN_F2R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F2R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F2R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F2R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F2R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F2R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F2R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F2R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F2R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F2R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F2R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F2R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F2R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F2R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F2R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F2R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F2R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F2R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F2R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F2R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F2R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F2R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F2R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F2R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F2R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F2R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F2R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F2R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F2R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F2R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F2R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F2R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F3R1 register  *******************/
+#define  CAN_F3R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F3R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F3R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F3R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F3R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F3R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F3R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F3R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F3R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F3R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F3R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F3R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F3R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F3R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F3R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F3R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F3R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F3R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F3R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F3R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F3R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F3R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F3R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F3R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F3R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F3R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F3R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F3R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F3R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F3R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F3R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F3R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F4R1 register  *******************/
+#define  CAN_F4R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F4R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F4R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F4R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F4R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F4R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F4R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F4R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F4R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F4R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F4R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F4R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F4R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F4R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F4R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F4R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F4R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F4R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F4R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F4R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F4R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F4R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F4R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F4R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F4R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F4R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F4R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F4R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F4R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F4R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F4R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F4R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F5R1 register  *******************/
+#define  CAN_F5R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F5R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F5R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F5R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F5R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F5R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F5R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F5R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F5R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F5R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F5R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F5R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F5R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F5R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F5R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F5R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F5R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F5R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F5R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F5R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F5R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F5R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F5R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F5R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F5R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F5R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F5R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F5R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F5R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F5R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F5R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F5R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F6R1 register  *******************/
+#define  CAN_F6R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F6R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F6R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F6R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F6R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F6R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F6R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F6R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F6R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F6R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F6R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F6R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F6R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F6R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F6R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F6R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F6R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F6R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F6R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F6R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F6R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F6R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F6R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F6R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F6R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F6R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F6R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F6R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F6R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F6R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F6R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F6R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F7R1 register  *******************/
+#define  CAN_F7R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F7R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F7R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F7R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F7R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F7R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F7R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F7R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F7R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F7R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F7R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F7R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F7R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F7R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F7R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F7R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F7R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F7R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F7R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F7R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F7R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F7R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F7R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F7R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F7R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F7R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F7R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F7R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F7R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F7R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F7R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F7R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F8R1 register  *******************/
+#define  CAN_F8R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F8R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F8R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F8R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F8R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F8R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F8R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F8R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F8R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F8R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F8R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F8R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F8R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F8R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F8R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F8R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F8R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F8R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F8R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F8R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F8R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F8R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F8R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F8R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F8R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F8R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F8R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F8R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F8R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F8R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F8R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F8R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F9R1 register  *******************/
+#define  CAN_F9R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F9R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F9R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F9R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F9R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F9R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F9R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F9R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F9R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F9R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F9R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F9R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F9R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F9R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F9R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F9R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F9R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F9R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F9R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F9R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F9R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F9R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F9R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F9R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F9R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F9R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F9R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F9R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F9R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F9R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F9R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F9R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F10R1 register  ******************/
+#define  CAN_F10R1_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F10R1_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F10R1_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F10R1_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F10R1_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F10R1_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F10R1_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F10R1_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F10R1_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F10R1_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F10R1_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F10R1_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F10R1_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F10R1_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F10R1_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F10R1_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F10R1_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F10R1_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F10R1_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F10R1_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F10R1_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F10R1_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F10R1_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F10R1_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F10R1_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F10R1_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F10R1_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F10R1_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F10R1_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F10R1_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F10R1_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F10R1_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F11R1 register  ******************/
+#define  CAN_F11R1_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F11R1_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F11R1_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F11R1_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F11R1_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F11R1_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F11R1_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F11R1_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F11R1_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F11R1_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F11R1_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F11R1_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F11R1_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F11R1_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F11R1_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F11R1_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F11R1_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F11R1_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F11R1_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F11R1_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F11R1_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F11R1_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F11R1_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F11R1_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F11R1_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F11R1_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F11R1_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F11R1_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F11R1_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F11R1_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F11R1_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F11R1_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F12R1 register  ******************/
+#define  CAN_F12R1_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F12R1_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F12R1_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F12R1_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F12R1_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F12R1_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F12R1_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F12R1_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F12R1_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F12R1_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F12R1_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F12R1_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F12R1_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F12R1_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F12R1_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F12R1_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F12R1_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F12R1_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F12R1_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F12R1_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F12R1_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F12R1_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F12R1_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F12R1_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F12R1_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F12R1_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F12R1_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F12R1_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F12R1_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F12R1_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F12R1_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F12R1_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F13R1 register  ******************/
+#define  CAN_F13R1_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F13R1_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F13R1_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F13R1_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F13R1_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F13R1_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F13R1_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F13R1_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F13R1_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F13R1_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F13R1_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F13R1_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F13R1_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F13R1_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F13R1_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F13R1_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F13R1_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F13R1_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F13R1_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F13R1_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F13R1_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F13R1_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F13R1_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F13R1_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F13R1_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F13R1_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F13R1_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F13R1_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F13R1_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F13R1_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F13R1_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F13R1_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F0R2 register  *******************/
+#define  CAN_F0R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F0R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F0R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F0R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F0R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F0R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F0R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F0R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F0R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F0R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F0R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F0R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F0R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F0R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F0R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F0R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F0R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F0R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F0R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F0R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F0R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F0R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F0R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F0R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F0R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F0R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F0R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F0R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F0R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F0R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F0R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F0R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F1R2 register  *******************/
+#define  CAN_F1R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F1R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F1R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F1R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F1R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F1R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F1R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F1R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F1R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F1R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F1R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F1R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F1R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F1R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F1R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F1R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F1R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F1R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F1R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F1R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F1R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F1R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F1R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F1R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F1R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F1R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F1R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F1R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F1R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F1R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F1R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F1R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F2R2 register  *******************/
+#define  CAN_F2R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F2R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F2R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F2R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F2R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F2R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F2R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F2R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F2R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F2R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F2R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F2R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F2R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F2R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F2R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F2R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F2R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F2R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F2R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F2R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F2R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F2R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F2R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F2R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F2R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F2R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F2R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F2R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F2R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F2R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F2R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F2R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F3R2 register  *******************/
+#define  CAN_F3R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F3R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F3R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F3R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F3R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F3R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F3R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F3R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F3R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F3R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F3R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F3R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F3R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F3R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F3R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F3R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F3R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F3R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F3R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F3R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F3R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F3R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F3R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F3R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F3R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F3R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F3R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F3R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F3R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F3R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F3R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F3R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F4R2 register  *******************/
+#define  CAN_F4R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F4R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F4R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F4R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F4R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F4R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F4R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F4R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F4R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F4R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F4R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F4R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F4R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F4R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F4R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F4R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F4R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F4R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F4R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F4R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F4R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F4R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F4R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F4R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F4R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F4R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F4R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F4R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F4R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F4R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F4R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F4R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F5R2 register  *******************/
+#define  CAN_F5R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F5R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F5R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F5R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F5R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F5R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F5R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F5R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F5R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F5R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F5R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F5R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F5R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F5R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F5R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F5R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F5R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F5R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F5R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F5R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F5R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F5R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F5R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F5R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F5R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F5R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F5R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F5R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F5R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F5R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F5R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F5R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F6R2 register  *******************/
+#define  CAN_F6R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F6R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F6R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F6R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F6R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F6R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F6R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F6R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F6R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F6R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F6R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F6R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F6R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F6R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F6R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F6R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F6R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F6R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F6R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F6R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F6R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F6R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F6R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F6R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F6R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F6R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F6R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F6R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F6R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F6R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F6R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F6R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F7R2 register  *******************/
+#define  CAN_F7R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F7R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F7R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F7R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F7R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F7R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F7R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F7R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F7R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F7R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F7R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F7R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F7R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F7R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F7R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F7R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F7R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F7R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F7R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F7R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F7R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F7R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F7R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F7R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F7R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F7R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F7R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F7R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F7R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F7R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F7R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F7R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F8R2 register  *******************/
+#define  CAN_F8R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F8R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F8R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F8R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F8R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F8R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F8R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F8R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F8R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F8R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F8R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F8R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F8R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F8R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F8R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F8R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F8R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F8R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F8R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F8R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F8R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F8R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F8R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F8R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F8R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F8R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F8R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F8R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F8R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F8R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F8R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F8R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F9R2 register  *******************/
+#define  CAN_F9R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F9R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F9R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F9R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F9R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F9R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F9R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F9R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F9R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F9R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F9R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F9R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F9R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F9R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F9R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F9R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F9R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F9R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F9R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F9R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F9R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F9R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F9R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F9R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F9R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F9R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F9R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F9R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F9R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F9R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F9R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F9R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F10R2 register  ******************/
+#define  CAN_F10R2_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F10R2_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F10R2_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F10R2_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F10R2_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F10R2_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F10R2_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F10R2_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F10R2_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F10R2_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F10R2_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F10R2_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F10R2_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F10R2_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F10R2_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F10R2_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F10R2_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F10R2_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F10R2_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F10R2_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F10R2_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F10R2_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F10R2_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F10R2_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F10R2_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F10R2_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F10R2_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F10R2_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F10R2_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F10R2_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F10R2_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F10R2_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F11R2 register  ******************/
+#define  CAN_F11R2_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F11R2_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F11R2_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F11R2_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F11R2_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F11R2_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F11R2_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F11R2_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F11R2_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F11R2_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F11R2_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F11R2_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F11R2_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F11R2_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F11R2_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F11R2_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F11R2_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F11R2_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F11R2_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F11R2_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F11R2_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F11R2_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F11R2_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F11R2_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F11R2_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F11R2_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F11R2_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F11R2_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F11R2_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F11R2_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F11R2_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F11R2_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F12R2 register  ******************/
+#define  CAN_F12R2_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F12R2_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F12R2_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F12R2_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F12R2_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F12R2_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F12R2_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F12R2_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F12R2_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F12R2_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F12R2_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F12R2_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F12R2_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F12R2_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F12R2_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F12R2_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F12R2_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F12R2_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F12R2_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F12R2_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F12R2_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F12R2_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F12R2_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F12R2_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F12R2_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F12R2_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F12R2_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F12R2_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F12R2_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F12R2_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F12R2_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F12R2_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F13R2 register  ******************/
+#define  CAN_F13R2_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F13R2_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F13R2_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F13R2_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F13R2_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F13R2_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F13R2_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F13R2_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F13R2_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F13R2_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F13R2_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F13R2_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F13R2_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F13R2_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F13R2_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F13R2_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F13R2_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F13R2_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F13R2_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F13R2_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F13R2_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F13R2_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F13R2_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F13R2_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F13R2_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F13R2_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F13R2_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F13R2_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F13R2_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F13R2_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F13R2_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F13R2_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                 HDMI-CEC (CEC)                             */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for CEC_CR register  *********************/
+#define  CEC_CR_CECEN                        ((uint32_t)0x00000001)       /*!< CEC Enable                         */
+#define  CEC_CR_TXSOM                        ((uint32_t)0x00000002)       /*!< CEC Tx Start Of Message            */
+#define  CEC_CR_TXEOM                        ((uint32_t)0x00000004)       /*!< CEC Tx End Of Message              */
+
+/*******************  Bit definition for CEC_CFGR register  *******************/
+#define  CEC_CFGR_SFT                        ((uint32_t)0x00000007)       /*!< CEC Signal Free Time               */
+#define  CEC_CFGR_RXTOL                      ((uint32_t)0x00000008)       /*!< CEC Tolerance                      */
+#define  CEC_CFGR_BRESTP                     ((uint32_t)0x00000010)       /*!< CEC Rx Stop                        */
+#define  CEC_CFGR_BREGEN                     ((uint32_t)0x00000020)       /*!< CEC Bit Rising Error generation    */
+#define  CEC_CFGR_LBPEGEN                    ((uint32_t)0x00000040)       /*!< CEC Long Period Error generation   */
+#define  CEC_CFGR_BRDNOGEN                   ((uint32_t)0x00000080)       /*!< CEC Broadcast no Error generation  */
+#define  CEC_CFGR_SFTOPT                     ((uint32_t)0x00000100)       /*!< CEC Signal Free Time optional      */
+#define  CEC_CFGR_OAR                        ((uint32_t)0x7FFF0000)       /*!< CEC Own Address                    */
+#define  CEC_CFGR_LSTN                       ((uint32_t)0x80000000)       /*!< CEC Listen mode                    */
+
+/*******************  Bit definition for CEC_TXDR register  *******************/
+#define  CEC_TXDR_TXD                        ((uint32_t)0x000000FF)       /*!< CEC Tx Data                        */
+
+/*******************  Bit definition for CEC_RXDR register  *******************/
+#define  CEC_TXDR_RXD                        ((uint32_t)0x000000FF)       /*!< CEC Rx Data                        */
+
+/*******************  Bit definition for CEC_ISR register  ********************/
+#define  CEC_ISR_RXBR                        ((uint32_t)0x00000001)       /*!< CEC Rx-Byte Received                   */
+#define  CEC_ISR_RXEND                       ((uint32_t)0x00000002)       /*!< CEC End Of Reception                   */
+#define  CEC_ISR_RXOVR                       ((uint32_t)0x00000004)       /*!< CEC Rx-Overrun                         */
+#define  CEC_ISR_BRE                         ((uint32_t)0x00000008)       /*!< CEC Rx Bit Rising Error                */
+#define  CEC_ISR_SBPE                        ((uint32_t)0x00000010)       /*!< CEC Rx Short Bit period Error          */
+#define  CEC_ISR_LBPE                        ((uint32_t)0x00000020)       /*!< CEC Rx Long Bit period Error           */
+#define  CEC_ISR_RXACKE                      ((uint32_t)0x00000040)       /*!< CEC Rx Missing Acknowledge             */
+#define  CEC_ISR_ARBLST                      ((uint32_t)0x00000080)       /*!< CEC Arbitration Lost                   */
+#define  CEC_ISR_TXBR                        ((uint32_t)0x00000100)       /*!< CEC Tx Byte Request                    */
+#define  CEC_ISR_TXEND                       ((uint32_t)0x00000200)       /*!< CEC End of Transmission                */
+#define  CEC_ISR_TXUDR                       ((uint32_t)0x00000400)       /*!< CEC Tx-Buffer Underrun                 */
+#define  CEC_ISR_TXERR                       ((uint32_t)0x00000800)       /*!< CEC Tx-Error                           */
+#define  CEC_ISR_TXACKE                      ((uint32_t)0x00001000)       /*!< CEC Tx Missing Acknowledge             */
+
+/*******************  Bit definition for CEC_IER register  ********************/
+#define  CEC_IER_RXBRIE                      ((uint32_t)0x00000001)       /*!< CEC Rx-Byte Received IT Enable         */
+#define  CEC_IER_RXENDIE                     ((uint32_t)0x00000002)       /*!< CEC End Of Reception IT Enable         */
+#define  CEC_IER_RXOVRIE                     ((uint32_t)0x00000004)       /*!< CEC Rx-Overrun IT Enable               */
+#define  CEC_IER_BREIE                       ((uint32_t)0x00000008)       /*!< CEC Rx Bit Rising Error IT Enable      */
+#define  CEC_IER_SBPEIE                      ((uint32_t)0x00000010)       /*!< CEC Rx Short Bit period Error IT Enable*/
+#define  CEC_IER_LBPEIE                      ((uint32_t)0x00000020)       /*!< CEC Rx Long Bit period Error IT Enable */
+#define  CEC_IER_RXACKEIE                    ((uint32_t)0x00000040)       /*!< CEC Rx Missing Acknowledge IT Enable   */
+#define  CEC_IER_ARBLSTIE                    ((uint32_t)0x00000080)       /*!< CEC Arbitration Lost IT Enable         */
+#define  CEC_IER_TXBRIE                      ((uint32_t)0x00000100)       /*!< CEC Tx Byte Request  IT Enable         */
+#define  CEC_IER_TXENDIE                     ((uint32_t)0x00000200)       /*!< CEC End of Transmission IT Enable      */
+#define  CEC_IER_TXUDRIE                     ((uint32_t)0x00000400)       /*!< CEC Tx-Buffer Underrun IT Enable       */
+#define  CEC_IER_TXERRIE                     ((uint32_t)0x00000800)       /*!< CEC Tx-Error IT Enable                 */
+#define  CEC_IER_TXACKEIE                    ((uint32_t)0x00001000)       /*!< CEC Tx Missing Acknowledge IT Enable   */
+
+/******************************************************************************/
+/*                                                                            */
+/*                          CRC calculation unit                              */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for CRC_DR register  *********************/
+#define  CRC_DR_DR                           ((uint32_t)0xFFFFFFFF)     /*!< Data register bits */
+
+/*******************  Bit definition for CRC_IDR register  ********************/
+#define  CRC_IDR_IDR                         ((uint32_t)0x000000FF)     /*!< General-purpose 8-bit data register bits */
+
+/********************  Bit definition for CRC_CR register  ********************/
+#define  CRC_CR_RESET                        ((uint32_t)0x00000001)     /*!< RESET the CRC computation unit bit */
+#define  CRC_CR_POLYSIZE                     ((uint32_t)0x00000018)     /*!< Polynomial size bits               */
+#define  CRC_CR_POLYSIZE_0                   ((uint32_t)0x00000008)     /*!< Polynomial size bit 0              */
+#define  CRC_CR_POLYSIZE_1                   ((uint32_t)0x00000010)     /*!< Polynomial size bit 1              */
+#define  CRC_CR_REV_IN                       ((uint32_t)0x00000060)     /*!< REV_IN Reverse Input Data bits     */
+#define  CRC_CR_REV_IN_0                     ((uint32_t)0x00000020)     /*!< Bit 0 */
+#define  CRC_CR_REV_IN_1                     ((uint32_t)0x00000040)     /*!< Bit 1 */
+#define  CRC_CR_REV_OUT                      ((uint32_t)0x00000080)     /*!< REV_OUT Reverse Output Data bits   */
+
+/*******************  Bit definition for CRC_INIT register  *******************/
+#define  CRC_INIT_INIT                       ((uint32_t)0xFFFFFFFF)     /*!< Initial CRC value bits         */
+
+/*******************  Bit definition for CRC_POL register  ********************/
+#define  CRC_POL_POL                         ((uint32_t)0xFFFFFFFF)     /*!< Coefficients of the polynomial */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                      Digital to Analog Converter                           */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for DAC_CR register  ********************/
+#define  DAC_CR_EN1                          ((uint32_t)0x00000001)        /*!<DAC channel1 enable                         */
+#define  DAC_CR_BOFF1                        ((uint32_t)0x00000002)        /*!<DAC channel1 output buffer disable          */
+#define  DAC_CR_TEN1                         ((uint32_t)0x00000004)        /*!<DAC channel1 Trigger enable                 */
+
+#define  DAC_CR_TSEL1                        ((uint32_t)0x00000038)        /*!<TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define  DAC_CR_TSEL1_0                      ((uint32_t)0x00000008)        /*!<Bit 0 */
+#define  DAC_CR_TSEL1_1                      ((uint32_t)0x00000010)        /*!<Bit 1 */
+#define  DAC_CR_TSEL1_2                      ((uint32_t)0x00000020)        /*!<Bit 2 */
+
+#define  DAC_CR_WAVE1                        ((uint32_t)0x000000C0)        /*!<WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define  DAC_CR_WAVE1_0                      ((uint32_t)0x00000040)        /*!<Bit 0 */
+#define  DAC_CR_WAVE1_1                      ((uint32_t)0x00000080)        /*!<Bit 1 */
+
+#define  DAC_CR_MAMP1                        ((uint32_t)0x00000F00)        /*!<MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define  DAC_CR_MAMP1_0                      ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  DAC_CR_MAMP1_1                      ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  DAC_CR_MAMP1_2                      ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  DAC_CR_MAMP1_3                      ((uint32_t)0x00000800)        /*!<Bit 3 */
+
+#define  DAC_CR_DMAEN1                       ((uint32_t)0x00001000)        /*!<DAC channel1 DMA enable                     */
+#define  DAC_CR_EN2                          ((uint32_t)0x00010000)        /*!<DAC channel2 enable                         */
+#define  DAC_CR_BOFF2                        ((uint32_t)0x00020000)        /*!<DAC channel2 output buffer disable          */
+#define  DAC_CR_TEN2                         ((uint32_t)0x00040000)        /*!<DAC channel2 Trigger enable                 */
+
+#define  DAC_CR_TSEL2                        ((uint32_t)0x00380000)        /*!<TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define  DAC_CR_TSEL2_0                      ((uint32_t)0x00080000)        /*!<Bit 0 */
+#define  DAC_CR_TSEL2_1                      ((uint32_t)0x00100000)        /*!<Bit 1 */
+#define  DAC_CR_TSEL2_2                      ((uint32_t)0x00200000)        /*!<Bit 2 */
+
+#define  DAC_CR_WAVE2                        ((uint32_t)0x00C00000)        /*!<WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define  DAC_CR_WAVE2_0                      ((uint32_t)0x00400000)        /*!<Bit 0 */
+#define  DAC_CR_WAVE2_1                      ((uint32_t)0x00800000)        /*!<Bit 1 */
+
+#define  DAC_CR_MAMP2                        ((uint32_t)0x0F000000)        /*!<MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define  DAC_CR_MAMP2_0                      ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  DAC_CR_MAMP2_1                      ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  DAC_CR_MAMP2_2                      ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  DAC_CR_MAMP2_3                      ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  DAC_CR_DMAEN2                       ((uint32_t)0x10000000)        /*!<DAC channel2 DMA enabled */
+
+/*****************  Bit definition for DAC_SWTRIGR register  ******************/
+#define  DAC_SWTRIGR_SWTRIG1                 ((uint32_t)0x01)               /*!<DAC channel1 software trigger */
+#define  DAC_SWTRIGR_SWTRIG2                 ((uint32_t)0x02)               /*!<DAC channel2 software trigger */
+
+/*****************  Bit definition for DAC_DHR12R1 register  ******************/
+#define  DAC_DHR12R1_DACC1DHR                ((uint32_t)0x0FFF)            /*!<DAC channel1 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12L1 register  ******************/
+#define  DAC_DHR12L1_DACC1DHR                ((uint32_t)0xFFF0)            /*!<DAC channel1 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8R1 register  ******************/
+#define  DAC_DHR8R1_DACC1DHR                 ((uint32_t)0xFF)               /*!<DAC channel1 8-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12R2 register  ******************/
+#define  DAC_DHR12R2_DACC2DHR                ((uint32_t)0x0FFF)            /*!<DAC channel2 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12L2 register  ******************/
+#define  DAC_DHR12L2_DACC2DHR                ((uint32_t)0xFFF0)            /*!<DAC channel2 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8R2 register  ******************/
+#define  DAC_DHR8R2_DACC2DHR                 ((uint32_t)0xFF)               /*!<DAC channel2 8-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12RD register  ******************/
+#define  DAC_DHR12RD_DACC1DHR                ((uint32_t)0x00000FFF)        /*!<DAC channel1 12-bit Right aligned data */
+#define  DAC_DHR12RD_DACC2DHR                ((uint32_t)0x0FFF0000)        /*!<DAC channel2 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12LD register  ******************/
+#define  DAC_DHR12LD_DACC1DHR                ((uint32_t)0x0000FFF0)        /*!<DAC channel1 12-bit Left aligned data */
+#define  DAC_DHR12LD_DACC2DHR                ((uint32_t)0xFFF00000)        /*!<DAC channel2 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8RD register  ******************/
+#define  DAC_DHR8RD_DACC1DHR                 ((uint32_t)0x00FF)            /*!<DAC channel1 8-bit Right aligned data */
+#define  DAC_DHR8RD_DACC2DHR                 ((uint32_t)0xFF00)            /*!<DAC channel2 8-bit Right aligned data */
+
+/*******************  Bit definition for DAC_DOR1 register  *******************/
+#define  DAC_DOR1_DACC1DOR                   ((uint32_t)0x0FFF)            /*!<DAC channel1 data output */
+
+/*******************  Bit definition for DAC_DOR2 register  *******************/
+#define  DAC_DOR2_DACC2DOR                   ((uint32_t)0x0FFF)            /*!<DAC channel2 data output */
+
+/********************  Bit definition for DAC_SR register  ********************/
+#define  DAC_SR_DMAUDR1                      ((uint32_t)0x00002000)        /*!<DAC channel1 DMA underrun flag */
+#define  DAC_SR_DMAUDR2                      ((uint32_t)0x20000000)        /*!<DAC channel2 DMA underrun flag */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                                 Debug MCU                                  */
+/*                                                                            */
+/******************************************************************************/
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    DCMI                                    */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bits definition for DCMI_CR register  ******************/
+#define DCMI_CR_CAPTURE                      ((uint32_t)0x00000001)
+#define DCMI_CR_CM                           ((uint32_t)0x00000002)
+#define DCMI_CR_CROP                         ((uint32_t)0x00000004)
+#define DCMI_CR_JPEG                         ((uint32_t)0x00000008)
+#define DCMI_CR_ESS                          ((uint32_t)0x00000010)
+#define DCMI_CR_PCKPOL                       ((uint32_t)0x00000020)
+#define DCMI_CR_HSPOL                        ((uint32_t)0x00000040)
+#define DCMI_CR_VSPOL                        ((uint32_t)0x00000080)
+#define DCMI_CR_FCRC_0                       ((uint32_t)0x00000100)
+#define DCMI_CR_FCRC_1                       ((uint32_t)0x00000200)
+#define DCMI_CR_EDM_0                        ((uint32_t)0x00000400)
+#define DCMI_CR_EDM_1                        ((uint32_t)0x00000800)
+#define DCMI_CR_CRE                          ((uint32_t)0x00001000)
+#define DCMI_CR_ENABLE                       ((uint32_t)0x00004000)
+#define DCMI_CR_BSM                          ((uint32_t)0x00030000)
+#define DCMI_CR_BSM_0                        ((uint32_t)0x00010000)
+#define DCMI_CR_BSM_1                        ((uint32_t)0x00020000)
+#define DCMI_CR_OEBS                         ((uint32_t)0x00040000)
+#define DCMI_CR_LSM                          ((uint32_t)0x00080000)
+#define DCMI_CR_OELS                         ((uint32_t)0x00100000)
+
+/********************  Bits definition for DCMI_SR register  ******************/
+#define DCMI_SR_HSYNC                        ((uint32_t)0x00000001)
+#define DCMI_SR_VSYNC                        ((uint32_t)0x00000002)
+#define DCMI_SR_FNE                          ((uint32_t)0x00000004)
+
+/********************  Bits definition for DCMI_RISR register  ****************/
+#define DCMI_RISR_FRAME_RIS                  ((uint32_t)0x00000001)
+#define DCMI_RISR_OVF_RIS                    ((uint32_t)0x00000002)
+#define DCMI_RISR_ERR_RIS                    ((uint32_t)0x00000004)
+#define DCMI_RISR_VSYNC_RIS                  ((uint32_t)0x00000008)
+#define DCMI_RISR_LINE_RIS                   ((uint32_t)0x00000010)
+
+/********************  Bits definition for DCMI_IER register  *****************/
+#define DCMI_IER_FRAME_IE                    ((uint32_t)0x00000001)
+#define DCMI_IER_OVF_IE                      ((uint32_t)0x00000002)
+#define DCMI_IER_ERR_IE                      ((uint32_t)0x00000004)
+#define DCMI_IER_VSYNC_IE                    ((uint32_t)0x00000008)
+#define DCMI_IER_LINE_IE                     ((uint32_t)0x00000010)
+
+/********************  Bits definition for DCMI_MISR register  ****************/
+#define DCMI_MISR_FRAME_MIS                  ((uint32_t)0x00000001)
+#define DCMI_MISR_OVF_MIS                    ((uint32_t)0x00000002)
+#define DCMI_MISR_ERR_MIS                    ((uint32_t)0x00000004)
+#define DCMI_MISR_VSYNC_MIS                  ((uint32_t)0x00000008)
+#define DCMI_MISR_LINE_MIS                   ((uint32_t)0x00000010)
+
+/********************  Bits definition for DCMI_ICR register  *****************/
+#define DCMI_ICR_FRAME_ISC                   ((uint32_t)0x00000001)
+#define DCMI_ICR_OVF_ISC                     ((uint32_t)0x00000002)
+#define DCMI_ICR_ERR_ISC                     ((uint32_t)0x00000004)
+#define DCMI_ICR_VSYNC_ISC                   ((uint32_t)0x00000008)
+#define DCMI_ICR_LINE_ISC                    ((uint32_t)0x00000010)
+
+/******************************************************************************/
+/*                                                                            */
+/*                             DMA Controller                                 */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bits definition for DMA_SxCR register  *****************/ 
+#define DMA_SxCR_CHSEL                       ((uint32_t)0x0E000000)
+#define DMA_SxCR_CHSEL_0                     ((uint32_t)0x02000000)
+#define DMA_SxCR_CHSEL_1                     ((uint32_t)0x04000000)
+#define DMA_SxCR_CHSEL_2                     ((uint32_t)0x08000000)
+#define DMA_SxCR_MBURST                      ((uint32_t)0x01800000)
+#define DMA_SxCR_MBURST_0                    ((uint32_t)0x00800000)
+#define DMA_SxCR_MBURST_1                    ((uint32_t)0x01000000)
+#define DMA_SxCR_PBURST                      ((uint32_t)0x00600000)
+#define DMA_SxCR_PBURST_0                    ((uint32_t)0x00200000)
+#define DMA_SxCR_PBURST_1                    ((uint32_t)0x00400000)
+#define DMA_SxCR_ACK                         ((uint32_t)0x00100000)
+#define DMA_SxCR_CT                          ((uint32_t)0x00080000)  
+#define DMA_SxCR_DBM                         ((uint32_t)0x00040000)
+#define DMA_SxCR_PL                          ((uint32_t)0x00030000)
+#define DMA_SxCR_PL_0                        ((uint32_t)0x00010000)
+#define DMA_SxCR_PL_1                        ((uint32_t)0x00020000)
+#define DMA_SxCR_PINCOS                      ((uint32_t)0x00008000)
+#define DMA_SxCR_MSIZE                       ((uint32_t)0x00006000)
+#define DMA_SxCR_MSIZE_0                     ((uint32_t)0x00002000)
+#define DMA_SxCR_MSIZE_1                     ((uint32_t)0x00004000)
+#define DMA_SxCR_PSIZE                       ((uint32_t)0x00001800)
+#define DMA_SxCR_PSIZE_0                     ((uint32_t)0x00000800)
+#define DMA_SxCR_PSIZE_1                     ((uint32_t)0x00001000)
+#define DMA_SxCR_MINC                        ((uint32_t)0x00000400)
+#define DMA_SxCR_PINC                        ((uint32_t)0x00000200)
+#define DMA_SxCR_CIRC                        ((uint32_t)0x00000100)
+#define DMA_SxCR_DIR                         ((uint32_t)0x000000C0)
+#define DMA_SxCR_DIR_0                       ((uint32_t)0x00000040)
+#define DMA_SxCR_DIR_1                       ((uint32_t)0x00000080)
+#define DMA_SxCR_PFCTRL                      ((uint32_t)0x00000020)
+#define DMA_SxCR_TCIE                        ((uint32_t)0x00000010)
+#define DMA_SxCR_HTIE                        ((uint32_t)0x00000008)
+#define DMA_SxCR_TEIE                        ((uint32_t)0x00000004)
+#define DMA_SxCR_DMEIE                       ((uint32_t)0x00000002)
+#define DMA_SxCR_EN                          ((uint32_t)0x00000001)
+
+/********************  Bits definition for DMA_SxCNDTR register  **************/
+#define DMA_SxNDT                            ((uint32_t)0x0000FFFF)
+#define DMA_SxNDT_0                          ((uint32_t)0x00000001)
+#define DMA_SxNDT_1                          ((uint32_t)0x00000002)
+#define DMA_SxNDT_2                          ((uint32_t)0x00000004)
+#define DMA_SxNDT_3                          ((uint32_t)0x00000008)
+#define DMA_SxNDT_4                          ((uint32_t)0x00000010)
+#define DMA_SxNDT_5                          ((uint32_t)0x00000020)
+#define DMA_SxNDT_6                          ((uint32_t)0x00000040)
+#define DMA_SxNDT_7                          ((uint32_t)0x00000080)
+#define DMA_SxNDT_8                          ((uint32_t)0x00000100)
+#define DMA_SxNDT_9                          ((uint32_t)0x00000200)
+#define DMA_SxNDT_10                         ((uint32_t)0x00000400)
+#define DMA_SxNDT_11                         ((uint32_t)0x00000800)
+#define DMA_SxNDT_12                         ((uint32_t)0x00001000)
+#define DMA_SxNDT_13                         ((uint32_t)0x00002000)
+#define DMA_SxNDT_14                         ((uint32_t)0x00004000)
+#define DMA_SxNDT_15                         ((uint32_t)0x00008000)
+
+/********************  Bits definition for DMA_SxFCR register  ****************/ 
+#define DMA_SxFCR_FEIE                       ((uint32_t)0x00000080)
+#define DMA_SxFCR_FS                         ((uint32_t)0x00000038)
+#define DMA_SxFCR_FS_0                       ((uint32_t)0x00000008)
+#define DMA_SxFCR_FS_1                       ((uint32_t)0x00000010)
+#define DMA_SxFCR_FS_2                       ((uint32_t)0x00000020)
+#define DMA_SxFCR_DMDIS                      ((uint32_t)0x00000004)
+#define DMA_SxFCR_FTH                        ((uint32_t)0x00000003)
+#define DMA_SxFCR_FTH_0                      ((uint32_t)0x00000001)
+#define DMA_SxFCR_FTH_1                      ((uint32_t)0x00000002)
+
+/********************  Bits definition for DMA_LISR register  *****************/ 
+#define DMA_LISR_TCIF3                       ((uint32_t)0x08000000)
+#define DMA_LISR_HTIF3                       ((uint32_t)0x04000000)
+#define DMA_LISR_TEIF3                       ((uint32_t)0x02000000)
+#define DMA_LISR_DMEIF3                      ((uint32_t)0x01000000)
+#define DMA_LISR_FEIF3                       ((uint32_t)0x00400000)
+#define DMA_LISR_TCIF2                       ((uint32_t)0x00200000)
+#define DMA_LISR_HTIF2                       ((uint32_t)0x00100000)
+#define DMA_LISR_TEIF2                       ((uint32_t)0x00080000)
+#define DMA_LISR_DMEIF2                      ((uint32_t)0x00040000)
+#define DMA_LISR_FEIF2                       ((uint32_t)0x00010000)
+#define DMA_LISR_TCIF1                       ((uint32_t)0x00000800)
+#define DMA_LISR_HTIF1                       ((uint32_t)0x00000400)
+#define DMA_LISR_TEIF1                       ((uint32_t)0x00000200)
+#define DMA_LISR_DMEIF1                      ((uint32_t)0x00000100)
+#define DMA_LISR_FEIF1                       ((uint32_t)0x00000040)
+#define DMA_LISR_TCIF0                       ((uint32_t)0x00000020)
+#define DMA_LISR_HTIF0                       ((uint32_t)0x00000010)
+#define DMA_LISR_TEIF0                       ((uint32_t)0x00000008)
+#define DMA_LISR_DMEIF0                      ((uint32_t)0x00000004)
+#define DMA_LISR_FEIF0                       ((uint32_t)0x00000001)
+
+/********************  Bits definition for DMA_HISR register  *****************/ 
+#define DMA_HISR_TCIF7                       ((uint32_t)0x08000000)
+#define DMA_HISR_HTIF7                       ((uint32_t)0x04000000)
+#define DMA_HISR_TEIF7                       ((uint32_t)0x02000000)
+#define DMA_HISR_DMEIF7                      ((uint32_t)0x01000000)
+#define DMA_HISR_FEIF7                       ((uint32_t)0x00400000)
+#define DMA_HISR_TCIF6                       ((uint32_t)0x00200000)
+#define DMA_HISR_HTIF6                       ((uint32_t)0x00100000)
+#define DMA_HISR_TEIF6                       ((uint32_t)0x00080000)
+#define DMA_HISR_DMEIF6                      ((uint32_t)0x00040000)
+#define DMA_HISR_FEIF6                       ((uint32_t)0x00010000)
+#define DMA_HISR_TCIF5                       ((uint32_t)0x00000800)
+#define DMA_HISR_HTIF5                       ((uint32_t)0x00000400)
+#define DMA_HISR_TEIF5                       ((uint32_t)0x00000200)
+#define DMA_HISR_DMEIF5                      ((uint32_t)0x00000100)
+#define DMA_HISR_FEIF5                       ((uint32_t)0x00000040)
+#define DMA_HISR_TCIF4                       ((uint32_t)0x00000020)
+#define DMA_HISR_HTIF4                       ((uint32_t)0x00000010)
+#define DMA_HISR_TEIF4                       ((uint32_t)0x00000008)
+#define DMA_HISR_DMEIF4                      ((uint32_t)0x00000004)
+#define DMA_HISR_FEIF4                       ((uint32_t)0x00000001)
+
+/********************  Bits definition for DMA_LIFCR register  ****************/ 
+#define DMA_LIFCR_CTCIF3                     ((uint32_t)0x08000000)
+#define DMA_LIFCR_CHTIF3                     ((uint32_t)0x04000000)
+#define DMA_LIFCR_CTEIF3                     ((uint32_t)0x02000000)
+#define DMA_LIFCR_CDMEIF3                    ((uint32_t)0x01000000)
+#define DMA_LIFCR_CFEIF3                     ((uint32_t)0x00400000)
+#define DMA_LIFCR_CTCIF2                     ((uint32_t)0x00200000)
+#define DMA_LIFCR_CHTIF2                     ((uint32_t)0x00100000)
+#define DMA_LIFCR_CTEIF2                     ((uint32_t)0x00080000)
+#define DMA_LIFCR_CDMEIF2                    ((uint32_t)0x00040000)
+#define DMA_LIFCR_CFEIF2                     ((uint32_t)0x00010000)
+#define DMA_LIFCR_CTCIF1                     ((uint32_t)0x00000800)
+#define DMA_LIFCR_CHTIF1                     ((uint32_t)0x00000400)
+#define DMA_LIFCR_CTEIF1                     ((uint32_t)0x00000200)
+#define DMA_LIFCR_CDMEIF1                    ((uint32_t)0x00000100)
+#define DMA_LIFCR_CFEIF1                     ((uint32_t)0x00000040)
+#define DMA_LIFCR_CTCIF0                     ((uint32_t)0x00000020)
+#define DMA_LIFCR_CHTIF0                     ((uint32_t)0x00000010)
+#define DMA_LIFCR_CTEIF0                     ((uint32_t)0x00000008)
+#define DMA_LIFCR_CDMEIF0                    ((uint32_t)0x00000004)
+#define DMA_LIFCR_CFEIF0                     ((uint32_t)0x00000001)
+
+/********************  Bits definition for DMA_HIFCR  register  ****************/ 
+#define DMA_HIFCR_CTCIF7                     ((uint32_t)0x08000000)
+#define DMA_HIFCR_CHTIF7                     ((uint32_t)0x04000000)
+#define DMA_HIFCR_CTEIF7                     ((uint32_t)0x02000000)
+#define DMA_HIFCR_CDMEIF7                    ((uint32_t)0x01000000)
+#define DMA_HIFCR_CFEIF7                     ((uint32_t)0x00400000)
+#define DMA_HIFCR_CTCIF6                     ((uint32_t)0x00200000)
+#define DMA_HIFCR_CHTIF6                     ((uint32_t)0x00100000)
+#define DMA_HIFCR_CTEIF6                     ((uint32_t)0x00080000)
+#define DMA_HIFCR_CDMEIF6                    ((uint32_t)0x00040000)
+#define DMA_HIFCR_CFEIF6                     ((uint32_t)0x00010000)
+#define DMA_HIFCR_CTCIF5                     ((uint32_t)0x00000800)
+#define DMA_HIFCR_CHTIF5                     ((uint32_t)0x00000400)
+#define DMA_HIFCR_CTEIF5                     ((uint32_t)0x00000200)
+#define DMA_HIFCR_CDMEIF5                    ((uint32_t)0x00000100)
+#define DMA_HIFCR_CFEIF5                     ((uint32_t)0x00000040)
+#define DMA_HIFCR_CTCIF4                     ((uint32_t)0x00000020)
+#define DMA_HIFCR_CHTIF4                     ((uint32_t)0x00000010)
+#define DMA_HIFCR_CTEIF4                     ((uint32_t)0x00000008)
+#define DMA_HIFCR_CDMEIF4                    ((uint32_t)0x00000004)
+#define DMA_HIFCR_CFEIF4                     ((uint32_t)0x00000001)
+
+/******************************************************************************/
+/*                                                                            */
+/*                         AHB Master DMA2D Controller (DMA2D)                */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for DMA2D_CR register  ******************/
+
+#define DMA2D_CR_START                     ((uint32_t)0x00000001)               /*!< Start transfer                          */
+#define DMA2D_CR_SUSP                      ((uint32_t)0x00000002)               /*!< Suspend transfer                        */
+#define DMA2D_CR_ABORT                     ((uint32_t)0x00000004)               /*!< Abort transfer                          */
+#define DMA2D_CR_TEIE                      ((uint32_t)0x00000100)               /*!< Transfer Error Interrupt Enable         */
+#define DMA2D_CR_TCIE                      ((uint32_t)0x00000200)               /*!< Transfer Complete Interrupt Enable      */
+#define DMA2D_CR_TWIE                      ((uint32_t)0x00000400)               /*!< Transfer Watermark Interrupt Enable     */
+#define DMA2D_CR_CAEIE                     ((uint32_t)0x00000800)               /*!< CLUT Access Error Interrupt Enable      */
+#define DMA2D_CR_CTCIE                     ((uint32_t)0x00001000)               /*!< CLUT Transfer Complete Interrupt Enable */
+#define DMA2D_CR_CEIE                      ((uint32_t)0x00002000)               /*!< Configuration Error Interrupt Enable    */
+#define DMA2D_CR_MODE                      ((uint32_t)0x00030000)               /*!< DMA2D Mode                              */
+
+/********************  Bit definition for DMA2D_ISR register  *****************/
+
+#define DMA2D_ISR_TEIF                     ((uint32_t)0x00000001)               /*!< Transfer Error Interrupt Flag         */
+#define DMA2D_ISR_TCIF                     ((uint32_t)0x00000002)               /*!< Transfer Complete Interrupt Flag      */
+#define DMA2D_ISR_TWIF                     ((uint32_t)0x00000004)               /*!< Transfer Watermark Interrupt Flag     */
+#define DMA2D_ISR_CAEIF                    ((uint32_t)0x00000008)               /*!< CLUT Access Error Interrupt Flag      */
+#define DMA2D_ISR_CTCIF                    ((uint32_t)0x00000010)               /*!< CLUT Transfer Complete Interrupt Flag */
+#define DMA2D_ISR_CEIF                     ((uint32_t)0x00000020)               /*!< Configuration Error Interrupt Flag    */
+
+/********************  Bit definition for DMA2D_IFSR register  ****************/
+
+#define DMA2D_IFSR_CTEIF                   ((uint32_t)0x00000001)               /*!< Clears Transfer Error Interrupt Flag         */
+#define DMA2D_IFSR_CTCIF                   ((uint32_t)0x00000002)               /*!< Clears Transfer Complete Interrupt Flag      */
+#define DMA2D_IFSR_CTWIF                   ((uint32_t)0x00000004)               /*!< Clears Transfer Watermark Interrupt Flag     */
+#define DMA2D_IFSR_CCAEIF                  ((uint32_t)0x00000008)               /*!< Clears CLUT Access Error Interrupt Flag      */
+#define DMA2D_IFSR_CCTCIF                  ((uint32_t)0x00000010)               /*!< Clears CLUT Transfer Complete Interrupt Flag */
+#define DMA2D_IFSR_CCEIF                   ((uint32_t)0x00000020)               /*!< Clears Configuration Error Interrupt Flag    */
+
+/********************  Bit definition for DMA2D_FGMAR register  ***************/
+
+#define DMA2D_FGMAR_MA                     ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_FGOR register  ****************/
+
+#define DMA2D_FGOR_LO                      ((uint32_t)0x00003FFF)               /*!< Line Offset */
+
+/********************  Bit definition for DMA2D_BGMAR register  ***************/
+
+#define DMA2D_BGMAR_MA                     ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_BGOR register  ****************/
+
+#define DMA2D_BGOR_LO                      ((uint32_t)0x00003FFF)               /*!< Line Offset */
+
+/********************  Bit definition for DMA2D_FGPFCCR register  *************/
+
+#define DMA2D_FGPFCCR_CM                   ((uint32_t)0x0000000F)               /*!< Color mode      */
+#define DMA2D_FGPFCCR_CCM                  ((uint32_t)0x00000010)               /*!< CLUT Color mode */
+#define DMA2D_FGPFCCR_START                ((uint32_t)0x00000020)               /*!< Start           */
+#define DMA2D_FGPFCCR_CS                   ((uint32_t)0x0000FF00)               /*!< CLUT size       */
+#define DMA2D_FGPFCCR_AM                   ((uint32_t)0x00030000)               /*!< Alpha mode      */
+#define DMA2D_FGPFCCR_ALPHA                ((uint32_t)0xFF000000)               /*!< Alpha value     */
+
+/********************  Bit definition for DMA2D_FGCOLR register  **************/
+
+#define DMA2D_FGCOLR_BLUE                  ((uint32_t)0x000000FF)               /*!< Blue Value  */
+#define DMA2D_FGCOLR_GREEN                 ((uint32_t)0x0000FF00)               /*!< Green Value */
+#define DMA2D_FGCOLR_RED                   ((uint32_t)0x00FF0000)               /*!< Red Value   */   
+
+/********************  Bit definition for DMA2D_BGPFCCR register  *************/
+
+#define DMA2D_BGPFCCR_CM                   ((uint32_t)0x0000000F)               /*!< Color mode      */
+#define DMA2D_BGPFCCR_CCM                  ((uint32_t)0x00000010)               /*!< CLUT Color mode */
+#define DMA2D_BGPFCCR_START                ((uint32_t)0x00000020)               /*!< Start           */
+#define DMA2D_BGPFCCR_CS                   ((uint32_t)0x0000FF00)               /*!< CLUT size       */
+#define DMA2D_BGPFCCR_AM                   ((uint32_t)0x00030000)               /*!< Alpha Mode      */
+#define DMA2D_BGPFCCR_ALPHA                ((uint32_t)0xFF000000)               /*!< Alpha value     */
+
+/********************  Bit definition for DMA2D_BGCOLR register  **************/
+
+#define DMA2D_BGCOLR_BLUE                  ((uint32_t)0x000000FF)               /*!< Blue Value  */
+#define DMA2D_BGCOLR_GREEN                 ((uint32_t)0x0000FF00)               /*!< Green Value */
+#define DMA2D_BGCOLR_RED                   ((uint32_t)0x00FF0000)               /*!< Red Value   */
+
+/********************  Bit definition for DMA2D_FGCMAR register  **************/
+
+#define DMA2D_FGCMAR_MA                    ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_BGCMAR register  **************/
+
+#define DMA2D_BGCMAR_MA                    ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_OPFCCR register  **************/
+
+#define DMA2D_OPFCCR_CM                    ((uint32_t)0x00000007)               /*!< Color mode */
+
+/********************  Bit definition for DMA2D_OCOLR register  ***************/
+
+/*!<Mode_ARGB8888/RGB888 */
+
+#define DMA2D_OCOLR_BLUE_1                 ((uint32_t)0x000000FF)               /*!< BLUE Value          */
+#define DMA2D_OCOLR_GREEN_1                ((uint32_t)0x0000FF00)               /*!< GREEN Value         */
+#define DMA2D_OCOLR_RED_1                  ((uint32_t)0x00FF0000)               /*!< Red Value           */
+#define DMA2D_OCOLR_ALPHA_1                ((uint32_t)0xFF000000)               /*!< Alpha Channel Value */
+
+/*!<Mode_RGB565 */
+#define DMA2D_OCOLR_BLUE_2                 ((uint32_t)0x0000001F)               /*!< BLUE Value   */
+#define DMA2D_OCOLR_GREEN_2                ((uint32_t)0x000007E0)               /*!< GREEN Value  */
+#define DMA2D_OCOLR_RED_2                  ((uint32_t)0x0000F800)               /*!< Red Value    */
+
+/*!<Mode_ARGB1555 */
+#define DMA2D_OCOLR_BLUE_3                 ((uint32_t)0x0000001F)               /*!< BLUE Value          */
+#define DMA2D_OCOLR_GREEN_3                ((uint32_t)0x000003E0)               /*!< GREEN Value         */
+#define DMA2D_OCOLR_RED_3                  ((uint32_t)0x00007C00)               /*!< Red Value           */
+#define DMA2D_OCOLR_ALPHA_3                ((uint32_t)0x00008000)               /*!< Alpha Channel Value */
+
+/*!<Mode_ARGB4444 */
+#define DMA2D_OCOLR_BLUE_4                 ((uint32_t)0x0000000F)               /*!< BLUE Value          */
+#define DMA2D_OCOLR_GREEN_4                ((uint32_t)0x000000F0)               /*!< GREEN Value         */
+#define DMA2D_OCOLR_RED_4                  ((uint32_t)0x00000F00)               /*!< Red Value           */
+#define DMA2D_OCOLR_ALPHA_4                ((uint32_t)0x0000F000)               /*!< Alpha Channel Value */
+
+/********************  Bit definition for DMA2D_OMAR register  ****************/
+
+#define DMA2D_OMAR_MA                      ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_OOR register  *****************/
+
+#define DMA2D_OOR_LO                       ((uint32_t)0x00003FFF)               /*!< Line Offset */
+
+/********************  Bit definition for DMA2D_NLR register  *****************/
+
+#define DMA2D_NLR_NL                       ((uint32_t)0x0000FFFF)               /*!< Number of Lines */
+#define DMA2D_NLR_PL                       ((uint32_t)0x3FFF0000)               /*!< Pixel per Lines */
+
+/********************  Bit definition for DMA2D_LWR register  *****************/
+
+#define DMA2D_LWR_LW                       ((uint32_t)0x0000FFFF)               /*!< Line Watermark */
+
+/********************  Bit definition for DMA2D_AMTCR register  ***************/
+
+#define DMA2D_AMTCR_EN                     ((uint32_t)0x00000001)               /*!< Enable    */
+#define DMA2D_AMTCR_DT                     ((uint32_t)0x0000FF00)               /*!< Dead Time */
+
+
+
+/********************  Bit definition for DMA2D_FGCLUT register  **************/
+                                                                     
+/********************  Bit definition for DMA2D_BGCLUT register  **************/
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                    External Interrupt/Event Controller                     */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for EXTI_IMR register  *******************/
+#define  EXTI_IMR_MR0                        ((uint32_t)0x00000001)        /*!< Interrupt Mask on line 0 */
+#define  EXTI_IMR_MR1                        ((uint32_t)0x00000002)        /*!< Interrupt Mask on line 1 */
+#define  EXTI_IMR_MR2                        ((uint32_t)0x00000004)        /*!< Interrupt Mask on line 2 */
+#define  EXTI_IMR_MR3                        ((uint32_t)0x00000008)        /*!< Interrupt Mask on line 3 */
+#define  EXTI_IMR_MR4                        ((uint32_t)0x00000010)        /*!< Interrupt Mask on line 4 */
+#define  EXTI_IMR_MR5                        ((uint32_t)0x00000020)        /*!< Interrupt Mask on line 5 */
+#define  EXTI_IMR_MR6                        ((uint32_t)0x00000040)        /*!< Interrupt Mask on line 6 */
+#define  EXTI_IMR_MR7                        ((uint32_t)0x00000080)        /*!< Interrupt Mask on line 7 */
+#define  EXTI_IMR_MR8                        ((uint32_t)0x00000100)        /*!< Interrupt Mask on line 8 */
+#define  EXTI_IMR_MR9                        ((uint32_t)0x00000200)        /*!< Interrupt Mask on line 9 */
+#define  EXTI_IMR_MR10                       ((uint32_t)0x00000400)        /*!< Interrupt Mask on line 10 */
+#define  EXTI_IMR_MR11                       ((uint32_t)0x00000800)        /*!< Interrupt Mask on line 11 */
+#define  EXTI_IMR_MR12                       ((uint32_t)0x00001000)        /*!< Interrupt Mask on line 12 */
+#define  EXTI_IMR_MR13                       ((uint32_t)0x00002000)        /*!< Interrupt Mask on line 13 */
+#define  EXTI_IMR_MR14                       ((uint32_t)0x00004000)        /*!< Interrupt Mask on line 14 */
+#define  EXTI_IMR_MR15                       ((uint32_t)0x00008000)        /*!< Interrupt Mask on line 15 */
+#define  EXTI_IMR_MR16                       ((uint32_t)0x00010000)        /*!< Interrupt Mask on line 16 */
+#define  EXTI_IMR_MR17                       ((uint32_t)0x00020000)        /*!< Interrupt Mask on line 17 */
+#define  EXTI_IMR_MR18                       ((uint32_t)0x00040000)        /*!< Interrupt Mask on line 18 */
+#define  EXTI_IMR_MR19                       ((uint32_t)0x00080000)        /*!< Interrupt Mask on line 19 */
+#define  EXTI_IMR_MR20                       ((uint32_t)0x00100000)        /*!< Interrupt Mask on line 20 */
+#define  EXTI_IMR_MR21                       ((uint32_t)0x00200000)        /*!< Interrupt Mask on line 21 */
+#define  EXTI_IMR_MR22                       ((uint32_t)0x00400000)        /*!< Interrupt Mask on line 22 */
+#define  EXTI_IMR_MR23                       ((uint32_t)0x00800000)        /*!< Interrupt Mask on line 23 */
+
+/*******************  Bit definition for EXTI_EMR register  *******************/
+#define  EXTI_EMR_MR0                        ((uint32_t)0x00000001)        /*!< Event Mask on line 0 */
+#define  EXTI_EMR_MR1                        ((uint32_t)0x00000002)        /*!< Event Mask on line 1 */
+#define  EXTI_EMR_MR2                        ((uint32_t)0x00000004)        /*!< Event Mask on line 2 */
+#define  EXTI_EMR_MR3                        ((uint32_t)0x00000008)        /*!< Event Mask on line 3 */
+#define  EXTI_EMR_MR4                        ((uint32_t)0x00000010)        /*!< Event Mask on line 4 */
+#define  EXTI_EMR_MR5                        ((uint32_t)0x00000020)        /*!< Event Mask on line 5 */
+#define  EXTI_EMR_MR6                        ((uint32_t)0x00000040)        /*!< Event Mask on line 6 */
+#define  EXTI_EMR_MR7                        ((uint32_t)0x00000080)        /*!< Event Mask on line 7 */
+#define  EXTI_EMR_MR8                        ((uint32_t)0x00000100)        /*!< Event Mask on line 8 */
+#define  EXTI_EMR_MR9                        ((uint32_t)0x00000200)        /*!< Event Mask on line 9 */
+#define  EXTI_EMR_MR10                       ((uint32_t)0x00000400)        /*!< Event Mask on line 10 */
+#define  EXTI_EMR_MR11                       ((uint32_t)0x00000800)        /*!< Event Mask on line 11 */
+#define  EXTI_EMR_MR12                       ((uint32_t)0x00001000)        /*!< Event Mask on line 12 */
+#define  EXTI_EMR_MR13                       ((uint32_t)0x00002000)        /*!< Event Mask on line 13 */
+#define  EXTI_EMR_MR14                       ((uint32_t)0x00004000)        /*!< Event Mask on line 14 */
+#define  EXTI_EMR_MR15                       ((uint32_t)0x00008000)        /*!< Event Mask on line 15 */
+#define  EXTI_EMR_MR16                       ((uint32_t)0x00010000)        /*!< Event Mask on line 16 */
+#define  EXTI_EMR_MR17                       ((uint32_t)0x00020000)        /*!< Event Mask on line 17 */
+#define  EXTI_EMR_MR18                       ((uint32_t)0x00040000)        /*!< Event Mask on line 18 */
+#define  EXTI_EMR_MR19                       ((uint32_t)0x00080000)        /*!< Event Mask on line 19 */
+#define  EXTI_EMR_MR20                       ((uint32_t)0x00100000)        /*!< Event Mask on line 20 */
+#define  EXTI_EMR_MR21                       ((uint32_t)0x00200000)        /*!< Event Mask on line 21 */
+#define  EXTI_EMR_MR22                       ((uint32_t)0x00400000)        /*!< Event Mask on line 22 */
+#define  EXTI_EMR_MR23                       ((uint32_t)0x00800000)        /*!< Event Mask on line 23 */
+
+/******************  Bit definition for EXTI_RTSR register  *******************/
+#define  EXTI_RTSR_TR0                       ((uint32_t)0x00000001)        /*!< Rising trigger event configuration bit of line 0 */
+#define  EXTI_RTSR_TR1                       ((uint32_t)0x00000002)        /*!< Rising trigger event configuration bit of line 1 */
+#define  EXTI_RTSR_TR2                       ((uint32_t)0x00000004)        /*!< Rising trigger event configuration bit of line 2 */
+#define  EXTI_RTSR_TR3                       ((uint32_t)0x00000008)        /*!< Rising trigger event configuration bit of line 3 */
+#define  EXTI_RTSR_TR4                       ((uint32_t)0x00000010)        /*!< Rising trigger event configuration bit of line 4 */
+#define  EXTI_RTSR_TR5                       ((uint32_t)0x00000020)        /*!< Rising trigger event configuration bit of line 5 */
+#define  EXTI_RTSR_TR6                       ((uint32_t)0x00000040)        /*!< Rising trigger event configuration bit of line 6 */
+#define  EXTI_RTSR_TR7                       ((uint32_t)0x00000080)        /*!< Rising trigger event configuration bit of line 7 */
+#define  EXTI_RTSR_TR8                       ((uint32_t)0x00000100)        /*!< Rising trigger event configuration bit of line 8 */
+#define  EXTI_RTSR_TR9                       ((uint32_t)0x00000200)        /*!< Rising trigger event configuration bit of line 9 */
+#define  EXTI_RTSR_TR10                      ((uint32_t)0x00000400)        /*!< Rising trigger event configuration bit of line 10 */
+#define  EXTI_RTSR_TR11                      ((uint32_t)0x00000800)        /*!< Rising trigger event configuration bit of line 11 */
+#define  EXTI_RTSR_TR12                      ((uint32_t)0x00001000)        /*!< Rising trigger event configuration bit of line 12 */
+#define  EXTI_RTSR_TR13                      ((uint32_t)0x00002000)        /*!< Rising trigger event configuration bit of line 13 */
+#define  EXTI_RTSR_TR14                      ((uint32_t)0x00004000)        /*!< Rising trigger event configuration bit of line 14 */
+#define  EXTI_RTSR_TR15                      ((uint32_t)0x00008000)        /*!< Rising trigger event configuration bit of line 15 */
+#define  EXTI_RTSR_TR16                      ((uint32_t)0x00010000)        /*!< Rising trigger event configuration bit of line 16 */
+#define  EXTI_RTSR_TR17                      ((uint32_t)0x00020000)        /*!< Rising trigger event configuration bit of line 17 */
+#define  EXTI_RTSR_TR18                      ((uint32_t)0x00040000)        /*!< Rising trigger event configuration bit of line 18 */
+#define  EXTI_RTSR_TR19                      ((uint32_t)0x00080000)        /*!< Rising trigger event configuration bit of line 19 */
+#define  EXTI_RTSR_TR20                      ((uint32_t)0x00100000)        /*!< Rising trigger event configuration bit of line 20 */
+#define  EXTI_RTSR_TR21                      ((uint32_t)0x00200000)        /*!< Rising trigger event configuration bit of line 21 */
+#define  EXTI_RTSR_TR22                      ((uint32_t)0x00400000)        /*!< Rising trigger event configuration bit of line 22 */
+#define  EXTI_RTSR_TR23                      ((uint32_t)0x00800000)        /*!< Rising trigger event configuration bit of line 23 */
+
+/******************  Bit definition for EXTI_FTSR register  *******************/
+#define  EXTI_FTSR_TR0                       ((uint32_t)0x00000001)        /*!< Falling trigger event configuration bit of line 0 */
+#define  EXTI_FTSR_TR1                       ((uint32_t)0x00000002)        /*!< Falling trigger event configuration bit of line 1 */
+#define  EXTI_FTSR_TR2                       ((uint32_t)0x00000004)        /*!< Falling trigger event configuration bit of line 2 */
+#define  EXTI_FTSR_TR3                       ((uint32_t)0x00000008)        /*!< Falling trigger event configuration bit of line 3 */
+#define  EXTI_FTSR_TR4                       ((uint32_t)0x00000010)        /*!< Falling trigger event configuration bit of line 4 */
+#define  EXTI_FTSR_TR5                       ((uint32_t)0x00000020)        /*!< Falling trigger event configuration bit of line 5 */
+#define  EXTI_FTSR_TR6                       ((uint32_t)0x00000040)        /*!< Falling trigger event configuration bit of line 6 */
+#define  EXTI_FTSR_TR7                       ((uint32_t)0x00000080)        /*!< Falling trigger event configuration bit of line 7 */
+#define  EXTI_FTSR_TR8                       ((uint32_t)0x00000100)        /*!< Falling trigger event configuration bit of line 8 */
+#define  EXTI_FTSR_TR9                       ((uint32_t)0x00000200)        /*!< Falling trigger event configuration bit of line 9 */
+#define  EXTI_FTSR_TR10                      ((uint32_t)0x00000400)        /*!< Falling trigger event configuration bit of line 10 */
+#define  EXTI_FTSR_TR11                      ((uint32_t)0x00000800)        /*!< Falling trigger event configuration bit of line 11 */
+#define  EXTI_FTSR_TR12                      ((uint32_t)0x00001000)        /*!< Falling trigger event configuration bit of line 12 */
+#define  EXTI_FTSR_TR13                      ((uint32_t)0x00002000)        /*!< Falling trigger event configuration bit of line 13 */
+#define  EXTI_FTSR_TR14                      ((uint32_t)0x00004000)        /*!< Falling trigger event configuration bit of line 14 */
+#define  EXTI_FTSR_TR15                      ((uint32_t)0x00008000)        /*!< Falling trigger event configuration bit of line 15 */
+#define  EXTI_FTSR_TR16                      ((uint32_t)0x00010000)        /*!< Falling trigger event configuration bit of line 16 */
+#define  EXTI_FTSR_TR17                      ((uint32_t)0x00020000)        /*!< Falling trigger event configuration bit of line 17 */
+#define  EXTI_FTSR_TR18                      ((uint32_t)0x00040000)        /*!< Falling trigger event configuration bit of line 18 */
+#define  EXTI_FTSR_TR19                      ((uint32_t)0x00080000)        /*!< Falling trigger event configuration bit of line 19 */
+#define  EXTI_FTSR_TR20                      ((uint32_t)0x00100000)        /*!< Falling trigger event configuration bit of line 20 */
+#define  EXTI_FTSR_TR21                      ((uint32_t)0x00200000)        /*!< Falling trigger event configuration bit of line 21 */
+#define  EXTI_FTSR_TR22                      ((uint32_t)0x00400000)        /*!< Falling trigger event configuration bit of line 22 */
+#define  EXTI_FTSR_TR23                      ((uint32_t)0x00800000)        /*!< Falling trigger event configuration bit of line 23 */
+
+/******************  Bit definition for EXTI_SWIER register  ******************/
+#define  EXTI_SWIER_SWIER0                   ((uint32_t)0x00000001)        /*!< Software Interrupt on line 0 */
+#define  EXTI_SWIER_SWIER1                   ((uint32_t)0x00000002)        /*!< Software Interrupt on line 1 */
+#define  EXTI_SWIER_SWIER2                   ((uint32_t)0x00000004)        /*!< Software Interrupt on line 2 */
+#define  EXTI_SWIER_SWIER3                   ((uint32_t)0x00000008)        /*!< Software Interrupt on line 3 */
+#define  EXTI_SWIER_SWIER4                   ((uint32_t)0x00000010)        /*!< Software Interrupt on line 4 */
+#define  EXTI_SWIER_SWIER5                   ((uint32_t)0x00000020)        /*!< Software Interrupt on line 5 */
+#define  EXTI_SWIER_SWIER6                   ((uint32_t)0x00000040)        /*!< Software Interrupt on line 6 */
+#define  EXTI_SWIER_SWIER7                   ((uint32_t)0x00000080)        /*!< Software Interrupt on line 7 */
+#define  EXTI_SWIER_SWIER8                   ((uint32_t)0x00000100)        /*!< Software Interrupt on line 8 */
+#define  EXTI_SWIER_SWIER9                   ((uint32_t)0x00000200)        /*!< Software Interrupt on line 9 */
+#define  EXTI_SWIER_SWIER10                  ((uint32_t)0x00000400)        /*!< Software Interrupt on line 10 */
+#define  EXTI_SWIER_SWIER11                  ((uint32_t)0x00000800)        /*!< Software Interrupt on line 11 */
+#define  EXTI_SWIER_SWIER12                  ((uint32_t)0x00001000)        /*!< Software Interrupt on line 12 */
+#define  EXTI_SWIER_SWIER13                  ((uint32_t)0x00002000)        /*!< Software Interrupt on line 13 */
+#define  EXTI_SWIER_SWIER14                  ((uint32_t)0x00004000)        /*!< Software Interrupt on line 14 */
+#define  EXTI_SWIER_SWIER15                  ((uint32_t)0x00008000)        /*!< Software Interrupt on line 15 */
+#define  EXTI_SWIER_SWIER16                  ((uint32_t)0x00010000)        /*!< Software Interrupt on line 16 */
+#define  EXTI_SWIER_SWIER17                  ((uint32_t)0x00020000)        /*!< Software Interrupt on line 17 */
+#define  EXTI_SWIER_SWIER18                  ((uint32_t)0x00040000)        /*!< Software Interrupt on line 18 */
+#define  EXTI_SWIER_SWIER19                  ((uint32_t)0x00080000)        /*!< Software Interrupt on line 19 */
+#define  EXTI_SWIER_SWIER20                  ((uint32_t)0x00100000)        /*!< Software Interrupt on line 20 */
+#define  EXTI_SWIER_SWIER21                  ((uint32_t)0x00200000)        /*!< Software Interrupt on line 21 */
+#define  EXTI_SWIER_SWIER22                  ((uint32_t)0x00400000)        /*!< Software Interrupt on line 22 */
+#define  EXTI_SWIER_SWIER23                  ((uint32_t)0x00800000)        /*!< Software Interrupt on line 23 */
+
+/*******************  Bit definition for EXTI_PR register  ********************/
+#define  EXTI_PR_PR0                         ((uint32_t)0x00000001)        /*!< Pending bit for line 0 */
+#define  EXTI_PR_PR1                         ((uint32_t)0x00000002)        /*!< Pending bit for line 1 */
+#define  EXTI_PR_PR2                         ((uint32_t)0x00000004)        /*!< Pending bit for line 2 */
+#define  EXTI_PR_PR3                         ((uint32_t)0x00000008)        /*!< Pending bit for line 3 */
+#define  EXTI_PR_PR4                         ((uint32_t)0x00000010)        /*!< Pending bit for line 4 */
+#define  EXTI_PR_PR5                         ((uint32_t)0x00000020)        /*!< Pending bit for line 5 */
+#define  EXTI_PR_PR6                         ((uint32_t)0x00000040)        /*!< Pending bit for line 6 */
+#define  EXTI_PR_PR7                         ((uint32_t)0x00000080)        /*!< Pending bit for line 7 */
+#define  EXTI_PR_PR8                         ((uint32_t)0x00000100)        /*!< Pending bit for line 8 */
+#define  EXTI_PR_PR9                         ((uint32_t)0x00000200)        /*!< Pending bit for line 9 */
+#define  EXTI_PR_PR10                        ((uint32_t)0x00000400)        /*!< Pending bit for line 10 */
+#define  EXTI_PR_PR11                        ((uint32_t)0x00000800)        /*!< Pending bit for line 11 */
+#define  EXTI_PR_PR12                        ((uint32_t)0x00001000)        /*!< Pending bit for line 12 */
+#define  EXTI_PR_PR13                        ((uint32_t)0x00002000)        /*!< Pending bit for line 13 */
+#define  EXTI_PR_PR14                        ((uint32_t)0x00004000)        /*!< Pending bit for line 14 */
+#define  EXTI_PR_PR15                        ((uint32_t)0x00008000)        /*!< Pending bit for line 15 */
+#define  EXTI_PR_PR16                        ((uint32_t)0x00010000)        /*!< Pending bit for line 16 */
+#define  EXTI_PR_PR17                        ((uint32_t)0x00020000)        /*!< Pending bit for line 17 */
+#define  EXTI_PR_PR18                        ((uint32_t)0x00040000)        /*!< Pending bit for line 18 */
+#define  EXTI_PR_PR19                        ((uint32_t)0x00080000)        /*!< Pending bit for line 19 */
+#define  EXTI_PR_PR20                        ((uint32_t)0x00100000)        /*!< Pending bit for line 20 */
+#define  EXTI_PR_PR21                        ((uint32_t)0x00200000)        /*!< Pending bit for line 21 */
+#define  EXTI_PR_PR22                        ((uint32_t)0x00400000)        /*!< Pending bit for line 22 */
+#define  EXTI_PR_PR23                        ((uint32_t)0x00800000)        /*!< Pending bit for line 23 */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    FLASH                                   */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bits definition for FLASH_ACR register  *****************/
+#define FLASH_ACR_LATENCY                    ((uint32_t)0x0000000F)
+#define FLASH_ACR_LATENCY_0WS                ((uint32_t)0x00000000)
+#define FLASH_ACR_LATENCY_1WS                ((uint32_t)0x00000001)
+#define FLASH_ACR_LATENCY_2WS                ((uint32_t)0x00000002)
+#define FLASH_ACR_LATENCY_3WS                ((uint32_t)0x00000003)
+#define FLASH_ACR_LATENCY_4WS                ((uint32_t)0x00000004)
+#define FLASH_ACR_LATENCY_5WS                ((uint32_t)0x00000005)
+#define FLASH_ACR_LATENCY_6WS                ((uint32_t)0x00000006)
+#define FLASH_ACR_LATENCY_7WS                ((uint32_t)0x00000007)
+#define FLASH_ACR_LATENCY_8WS                ((uint32_t)0x00000008)
+#define FLASH_ACR_LATENCY_9WS                ((uint32_t)0x00000009)
+#define FLASH_ACR_LATENCY_10WS               ((uint32_t)0x0000000A)
+#define FLASH_ACR_LATENCY_11WS               ((uint32_t)0x0000000B)
+#define FLASH_ACR_LATENCY_12WS               ((uint32_t)0x0000000C)
+#define FLASH_ACR_LATENCY_13WS               ((uint32_t)0x0000000D)
+#define FLASH_ACR_LATENCY_14WS               ((uint32_t)0x0000000E)
+#define FLASH_ACR_LATENCY_15WS               ((uint32_t)0x0000000F)
+#define FLASH_ACR_PRFTEN                     ((uint32_t)0x00000100)
+#define FLASH_ACR_ARTEN                      ((uint32_t)0x00000200)
+#define FLASH_ACR_ARTRST                     ((uint32_t)0x00000800)
+
+/*******************  Bits definition for FLASH_SR register  ******************/
+#define FLASH_SR_EOP                         ((uint32_t)0x00000001)
+#define FLASH_SR_OPERR                       ((uint32_t)0x00000002)
+#define FLASH_SR_WRPERR                      ((uint32_t)0x00000010)
+#define FLASH_SR_PGAERR                      ((uint32_t)0x00000020)
+#define FLASH_SR_PGPERR                      ((uint32_t)0x00000040)
+#define FLASH_SR_ERSERR                      ((uint32_t)0x00000080)
+#define FLASH_SR_BSY                         ((uint32_t)0x00010000)
+
+/*******************  Bits definition for FLASH_CR register  ******************/
+#define FLASH_CR_PG                          ((uint32_t)0x00000001)
+#define FLASH_CR_SER                         ((uint32_t)0x00000002)
+#define FLASH_CR_MER                         ((uint32_t)0x00000004)
+#define FLASH_CR_SNB                         ((uint32_t)0x00000078)
+#define FLASH_CR_SNB_0                       ((uint32_t)0x00000008)
+#define FLASH_CR_SNB_1                       ((uint32_t)0x00000010)
+#define FLASH_CR_SNB_2                       ((uint32_t)0x00000020)
+#define FLASH_CR_SNB_3                       ((uint32_t)0x00000040)
+#define FLASH_CR_PSIZE                       ((uint32_t)0x00000300)
+#define FLASH_CR_PSIZE_0                     ((uint32_t)0x00000100)
+#define FLASH_CR_PSIZE_1                     ((uint32_t)0x00000200)
+#define FLASH_CR_STRT                        ((uint32_t)0x00010000)
+#define FLASH_CR_EOPIE                       ((uint32_t)0x01000000)
+#define FLASH_CR_ERRIE                       ((uint32_t)0x02000000)
+#define FLASH_CR_LOCK                        ((uint32_t)0x80000000)
+
+/*******************  Bits definition for FLASH_OPTCR register  ***************/
+#define FLASH_OPTCR_OPTLOCK                 ((uint32_t)0x00000001)
+#define FLASH_OPTCR_OPTSTRT                 ((uint32_t)0x00000002)
+#define FLASH_OPTCR_BOR_LEV                 ((uint32_t)0x0000000C)
+#define FLASH_OPTCR_BOR_LEV_0               ((uint32_t)0x00000004)
+#define FLASH_OPTCR_BOR_LEV_1               ((uint32_t)0x00000008)
+#define FLASH_OPTCR_WWDG_SW                 ((uint32_t)0x00000010)
+#define FLASH_OPTCR_IWDG_SW                 ((uint32_t)0x00000020)
+#define FLASH_OPTCR_nRST_STOP               ((uint32_t)0x00000040)
+#define FLASH_OPTCR_nRST_STDBY              ((uint32_t)0x00000080)
+#define FLASH_OPTCR_RDP                     ((uint32_t)0x0000FF00)
+#define FLASH_OPTCR_RDP_0                   ((uint32_t)0x00000100)
+#define FLASH_OPTCR_RDP_1                   ((uint32_t)0x00000200)
+#define FLASH_OPTCR_RDP_2                   ((uint32_t)0x00000400)
+#define FLASH_OPTCR_RDP_3                   ((uint32_t)0x00000800)
+#define FLASH_OPTCR_RDP_4                   ((uint32_t)0x00001000)
+#define FLASH_OPTCR_RDP_5                   ((uint32_t)0x00002000)
+#define FLASH_OPTCR_RDP_6                   ((uint32_t)0x00004000)
+#define FLASH_OPTCR_RDP_7                   ((uint32_t)0x00008000)
+#define FLASH_OPTCR_nWRP                    ((uint32_t)0x00FF0000)
+#define FLASH_OPTCR_nWRP_0                  ((uint32_t)0x00010000)
+#define FLASH_OPTCR_nWRP_1                  ((uint32_t)0x00020000)
+#define FLASH_OPTCR_nWRP_2                  ((uint32_t)0x00040000)
+#define FLASH_OPTCR_nWRP_3                  ((uint32_t)0x00080000)
+#define FLASH_OPTCR_nWRP_4                  ((uint32_t)0x00100000)
+#define FLASH_OPTCR_nWRP_5                  ((uint32_t)0x00200000)
+#define FLASH_OPTCR_nWRP_6                  ((uint32_t)0x00400000)
+#define FLASH_OPTCR_nWRP_7                  ((uint32_t)0x00800000)
+#define FLASH_OPTCR_IWDG_STDBY              ((uint32_t)0x40000000)
+#define FLASH_OPTCR_IWDG_STOP               ((uint32_t)0x80000000)
+
+/*******************  Bits definition for FLASH_OPTCR1 register  ***************/
+#define FLASH_OPTCR1_BOOT_ADD0              ((uint32_t)0x0000FFFF)
+#define FLASH_OPTCR1_BOOT_ADD1              ((uint32_t)0xFFFF0000)
+
+/******************************************************************************/
+/*                                                                            */
+/*                          Flexible Memory Controller                        */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for FMC_BCR1 register  *******************/
+#define  FMC_BCR1_MBKEN                     ((uint32_t)0x00000001)        /*!<Memory bank enable bit                 */
+#define  FMC_BCR1_MUXEN                     ((uint32_t)0x00000002)        /*!<Address/data multiplexing enable bit   */
+
+#define  FMC_BCR1_MTYP                      ((uint32_t)0x0000000C)        /*!<MTYP[1:0] bits (Memory type)           */
+#define  FMC_BCR1_MTYP_0                    ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_BCR1_MTYP_1                    ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_BCR1_MWID                      ((uint32_t)0x00000030)        /*!<MWID[1:0] bits (Memory data bus width) */
+#define  FMC_BCR1_MWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BCR1_MWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_BCR1_FACCEN                    ((uint32_t)0x00000040)        /*!<Flash access enable        */
+#define  FMC_BCR1_BURSTEN                   ((uint32_t)0x00000100)        /*!<Burst enable bit           */
+#define  FMC_BCR1_WAITPOL                   ((uint32_t)0x00000200)        /*!<Wait signal polarity bit   */
+#define  FMC_BCR1_WRAPMOD                   ((uint32_t)0x00000400)        /*!<Wrapped burst mode support */
+#define  FMC_BCR1_WAITCFG                   ((uint32_t)0x00000800)        /*!<Wait timing configuration  */
+#define  FMC_BCR1_WREN                      ((uint32_t)0x00001000)        /*!<Write enable bit           */
+#define  FMC_BCR1_WAITEN                    ((uint32_t)0x00002000)        /*!<Wait enable bit            */
+#define  FMC_BCR1_EXTMOD                    ((uint32_t)0x00004000)        /*!<Extended mode enable       */
+#define  FMC_BCR1_ASYNCWAIT                 ((uint32_t)0x00008000)        /*!<Asynchronous wait          */
+#define  FMC_BCR1_CPSIZE                     ((uint32_t)0x00070000)        /*!<CRAM page size             */
+#define  FMC_BCR1_CPSIZE_0                   ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BCR1_CPSIZE_1                   ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BCR1_CPSIZE_2                   ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BCR1_CBURSTRW                  ((uint32_t)0x00080000)        /*!<Write burst enable         */
+#define  FMC_BCR1_CCLKEN                    ((uint32_t)0x00100000)        /*!<Continous clock enable     */
+#define  FMC_BCR1_WFDIS                     ((uint32_t)0x00200000)        /*!<Write FIFO Disable         */
+
+/******************  Bit definition for FMC_BCR2 register  *******************/
+#define  FMC_BCR2_MBKEN                     ((uint32_t)0x00000001)        /*!<Memory bank enable bit                 */
+#define  FMC_BCR2_MUXEN                     ((uint32_t)0x00000002)        /*!<Address/data multiplexing enable bit   */
+
+#define  FMC_BCR2_MTYP                      ((uint32_t)0x0000000C)        /*!<MTYP[1:0] bits (Memory type)           */
+#define  FMC_BCR2_MTYP_0                    ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_BCR2_MTYP_1                    ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_BCR2_MWID                      ((uint32_t)0x00000030)        /*!<MWID[1:0] bits (Memory data bus width) */
+#define  FMC_BCR2_MWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BCR2_MWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_BCR2_FACCEN                    ((uint32_t)0x00000040)        /*!<Flash access enable        */
+#define  FMC_BCR2_BURSTEN                   ((uint32_t)0x00000100)        /*!<Burst enable bit           */
+#define  FMC_BCR2_WAITPOL                   ((uint32_t)0x00000200)        /*!<Wait signal polarity bit   */
+#define  FMC_BCR2_WRAPMOD                   ((uint32_t)0x00000400)        /*!<Wrapped burst mode support */
+#define  FMC_BCR2_WAITCFG                   ((uint32_t)0x00000800)        /*!<Wait timing configuration  */
+#define  FMC_BCR2_WREN                      ((uint32_t)0x00001000)        /*!<Write enable bit           */
+#define  FMC_BCR2_WAITEN                    ((uint32_t)0x00002000)        /*!<Wait enable bit            */
+#define  FMC_BCR2_EXTMOD                    ((uint32_t)0x00004000)        /*!<Extended mode enable       */
+#define  FMC_BCR2_ASYNCWAIT                 ((uint32_t)0x00008000)        /*!<Asynchronous wait          */
+#define  FMC_BCR2_CPSIZE                     ((uint32_t)0x00070000)        /*!<CRAM page size             */
+#define  FMC_BCR2_CPSIZE_0                   ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BCR2_CPSIZE_1                   ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BCR2_CPSIZE_2                   ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BCR2_CBURSTRW                  ((uint32_t)0x00080000)        /*!<Write burst enable         */
+
+/******************  Bit definition for FMC_BCR3 register  *******************/
+#define  FMC_BCR3_MBKEN                     ((uint32_t)0x00000001)        /*!<Memory bank enable bit                 */
+#define  FMC_BCR3_MUXEN                     ((uint32_t)0x00000002)        /*!<Address/data multiplexing enable bit   */
+
+#define  FMC_BCR3_MTYP                      ((uint32_t)0x0000000C)        /*!<MTYP[1:0] bits (Memory type)           */
+#define  FMC_BCR3_MTYP_0                    ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_BCR3_MTYP_1                    ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_BCR3_MWID                      ((uint32_t)0x00000030)        /*!<MWID[1:0] bits (Memory data bus width) */
+#define  FMC_BCR3_MWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BCR3_MWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_BCR3_FACCEN                    ((uint32_t)0x00000040)        /*!<Flash access enable        */
+#define  FMC_BCR3_BURSTEN                   ((uint32_t)0x00000100)        /*!<Burst enable bit           */
+#define  FMC_BCR3_WAITPOL                   ((uint32_t)0x00000200)        /*!<Wait signal polarity bit   */
+#define  FMC_BCR3_WRAPMOD                   ((uint32_t)0x00000400)        /*!<Wrapped burst mode support */
+#define  FMC_BCR3_WAITCFG                   ((uint32_t)0x00000800)        /*!<Wait timing configuration  */
+#define  FMC_BCR3_WREN                      ((uint32_t)0x00001000)        /*!<Write enable bit           */
+#define  FMC_BCR3_WAITEN                    ((uint32_t)0x00002000)        /*!<Wait enable bit            */
+#define  FMC_BCR3_EXTMOD                    ((uint32_t)0x00004000)        /*!<Extended mode enable       */
+#define  FMC_BCR3_ASYNCWAIT                 ((uint32_t)0x00008000)        /*!<Asynchronous wait          */
+#define  FMC_BCR3_CPSIZE                     ((uint32_t)0x00070000)        /*!<CRAM page size             */
+#define  FMC_BCR3_CPSIZE_0                   ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BCR3_CPSIZE_1                   ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BCR3_CPSIZE_2                   ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BCR3_CBURSTRW                  ((uint32_t)0x00080000)        /*!<Write burst enable         */
+
+/******************  Bit definition for FMC_BCR4 register  *******************/
+#define  FMC_BCR4_MBKEN                     ((uint32_t)0x00000001)        /*!<Memory bank enable bit                 */
+#define  FMC_BCR4_MUXEN                     ((uint32_t)0x00000002)        /*!<Address/data multiplexing enable bit   */
+
+#define  FMC_BCR4_MTYP                      ((uint32_t)0x0000000C)        /*!<MTYP[1:0] bits (Memory type)           */
+#define  FMC_BCR4_MTYP_0                    ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_BCR4_MTYP_1                    ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_BCR4_MWID                      ((uint32_t)0x00000030)        /*!<MWID[1:0] bits (Memory data bus width) */
+#define  FMC_BCR4_MWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BCR4_MWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_BCR4_FACCEN                    ((uint32_t)0x00000040)        /*!<Flash access enable        */
+#define  FMC_BCR4_BURSTEN                   ((uint32_t)0x00000100)        /*!<Burst enable bit           */
+#define  FMC_BCR4_WAITPOL                   ((uint32_t)0x00000200)        /*!<Wait signal polarity bit   */
+#define  FMC_BCR4_WRAPMOD                   ((uint32_t)0x00000400)        /*!<Wrapped burst mode support */
+#define  FMC_BCR4_WAITCFG                   ((uint32_t)0x00000800)        /*!<Wait timing configuration  */
+#define  FMC_BCR4_WREN                      ((uint32_t)0x00001000)        /*!<Write enable bit           */
+#define  FMC_BCR4_WAITEN                    ((uint32_t)0x00002000)        /*!<Wait enable bit            */
+#define  FMC_BCR4_EXTMOD                    ((uint32_t)0x00004000)        /*!<Extended mode enable       */
+#define  FMC_BCR4_ASYNCWAIT                 ((uint32_t)0x00008000)        /*!<Asynchronous wait          */
+#define  FMC_BCR4_CPSIZE                     ((uint32_t)0x00070000)        /*!<CRAM page size             */
+#define  FMC_BCR4_CPSIZE_0                   ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BCR4_CPSIZE_1                   ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BCR4_CPSIZE_2                   ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BCR4_CBURSTRW                  ((uint32_t)0x00080000)        /*!<Write burst enable         */
+
+/******************  Bit definition for FMC_BTR1 register  ******************/
+#define  FMC_BTR1_ADDSET                    ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BTR1_ADDSET_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BTR1_ADDSET_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BTR1_ADDSET_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BTR1_ADDSET_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BTR1_ADDHLD                    ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration)  */
+#define  FMC_BTR1_ADDHLD_0                  ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BTR1_ADDHLD_1                  ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BTR1_ADDHLD_2                  ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BTR1_ADDHLD_3                  ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BTR1_DATAST                    ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BTR1_DATAST_0                  ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BTR1_DATAST_1                  ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BTR1_DATAST_2                  ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BTR1_DATAST_3                  ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BTR1_DATAST_4                  ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BTR1_DATAST_5                  ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BTR1_DATAST_6                  ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BTR1_DATAST_7                  ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BTR1_BUSTURN                   ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BTR1_BUSTURN_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BTR1_BUSTURN_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BTR1_BUSTURN_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BTR1_BUSTURN_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BTR1_CLKDIV                    ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BTR1_CLKDIV_0                  ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BTR1_CLKDIV_1                  ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BTR1_CLKDIV_2                  ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BTR1_CLKDIV_3                  ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BTR1_DATLAT                    ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BTR1_DATLAT_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BTR1_DATLAT_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BTR1_DATLAT_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BTR1_DATLAT_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BTR1_ACCMOD                    ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BTR1_ACCMOD_0                  ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BTR1_ACCMOD_1                  ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BTR2 register  *******************/
+#define  FMC_BTR2_ADDSET                    ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BTR2_ADDSET_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BTR2_ADDSET_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BTR2_ADDSET_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BTR2_ADDSET_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BTR2_ADDHLD                    ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BTR2_ADDHLD_0                  ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BTR2_ADDHLD_1                  ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BTR2_ADDHLD_2                  ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BTR2_ADDHLD_3                  ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BTR2_DATAST                    ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BTR2_DATAST_0                  ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BTR2_DATAST_1                  ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BTR2_DATAST_2                  ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BTR2_DATAST_3                  ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BTR2_DATAST_4                  ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BTR2_DATAST_5                  ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BTR2_DATAST_6                  ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BTR2_DATAST_7                  ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BTR2_BUSTURN                   ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BTR2_BUSTURN_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BTR2_BUSTURN_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BTR2_BUSTURN_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BTR2_BUSTURN_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BTR2_CLKDIV                    ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BTR2_CLKDIV_0                  ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BTR2_CLKDIV_1                  ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BTR2_CLKDIV_2                  ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BTR2_CLKDIV_3                  ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BTR2_DATLAT                    ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BTR2_DATLAT_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BTR2_DATLAT_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BTR2_DATLAT_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BTR2_DATLAT_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BTR2_ACCMOD                    ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BTR2_ACCMOD_0                  ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BTR2_ACCMOD_1                  ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/*******************  Bit definition for FMC_BTR3 register  *******************/
+#define  FMC_BTR3_ADDSET                    ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BTR3_ADDSET_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BTR3_ADDSET_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BTR3_ADDSET_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BTR3_ADDSET_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BTR3_ADDHLD                    ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BTR3_ADDHLD_0                  ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BTR3_ADDHLD_1                  ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BTR3_ADDHLD_2                  ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BTR3_ADDHLD_3                  ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BTR3_DATAST                    ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BTR3_DATAST_0                  ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BTR3_DATAST_1                  ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BTR3_DATAST_2                  ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BTR3_DATAST_3                  ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BTR3_DATAST_4                  ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BTR3_DATAST_5                  ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BTR3_DATAST_6                  ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BTR3_DATAST_7                  ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BTR3_BUSTURN                   ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BTR3_BUSTURN_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BTR3_BUSTURN_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BTR3_BUSTURN_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BTR3_BUSTURN_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BTR3_CLKDIV                    ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BTR3_CLKDIV_0                  ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BTR3_CLKDIV_1                  ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BTR3_CLKDIV_2                  ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BTR3_CLKDIV_3                  ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BTR3_DATLAT                    ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BTR3_DATLAT_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BTR3_DATLAT_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BTR3_DATLAT_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BTR3_DATLAT_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BTR3_ACCMOD                    ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BTR3_ACCMOD_0                  ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BTR3_ACCMOD_1                  ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BTR4 register  *******************/
+#define  FMC_BTR4_ADDSET                    ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BTR4_ADDSET_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BTR4_ADDSET_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BTR4_ADDSET_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BTR4_ADDSET_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BTR4_ADDHLD                    ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BTR4_ADDHLD_0                  ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BTR4_ADDHLD_1                  ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BTR4_ADDHLD_2                  ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BTR4_ADDHLD_3                  ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BTR4_DATAST                    ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BTR4_DATAST_0                  ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BTR4_DATAST_1                  ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BTR4_DATAST_2                  ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BTR4_DATAST_3                  ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BTR4_DATAST_4                  ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BTR4_DATAST_5                  ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BTR4_DATAST_6                  ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BTR4_DATAST_7                  ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BTR4_BUSTURN                   ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BTR4_BUSTURN_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BTR4_BUSTURN_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BTR4_BUSTURN_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BTR4_BUSTURN_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BTR4_CLKDIV                    ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BTR4_CLKDIV_0                  ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BTR4_CLKDIV_1                  ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BTR4_CLKDIV_2                  ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BTR4_CLKDIV_3                  ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BTR4_DATLAT                    ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BTR4_DATLAT_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BTR4_DATLAT_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BTR4_DATLAT_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BTR4_DATLAT_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BTR4_ACCMOD                    ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BTR4_ACCMOD_0                  ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BTR4_ACCMOD_1                  ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BWTR1 register  ******************/
+#define  FMC_BWTR1_ADDSET                   ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BWTR1_ADDSET_0                 ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BWTR1_ADDSET_1                 ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BWTR1_ADDSET_2                 ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BWTR1_ADDSET_3                 ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BWTR1_ADDHLD                   ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BWTR1_ADDHLD_0                 ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BWTR1_ADDHLD_1                 ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BWTR1_ADDHLD_2                 ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BWTR1_ADDHLD_3                 ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BWTR1_DATAST                   ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BWTR1_DATAST_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BWTR1_DATAST_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BWTR1_DATAST_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BWTR1_DATAST_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BWTR1_DATAST_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BWTR1_DATAST_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BWTR1_DATAST_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BWTR1_DATAST_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BWTR1_BUSTURN                  ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BWTR1_BUSTURN_0                ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BWTR1_BUSTURN_1                ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BWTR1_BUSTURN_2                ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BWTR1_BUSTURN_3                ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BWTR1_ACCMOD                   ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BWTR1_ACCMOD_0                 ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BWTR1_ACCMOD_1                 ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BWTR2 register  ******************/
+#define  FMC_BWTR2_ADDSET                   ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BWTR2_ADDSET_0                 ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BWTR2_ADDSET_1                 ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BWTR2_ADDSET_2                 ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BWTR2_ADDSET_3                 ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BWTR2_ADDHLD                   ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BWTR2_ADDHLD_0                 ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BWTR2_ADDHLD_1                 ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BWTR2_ADDHLD_2                 ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BWTR2_ADDHLD_3                 ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BWTR2_DATAST                   ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BWTR2_DATAST_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BWTR2_DATAST_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BWTR2_DATAST_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BWTR2_DATAST_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BWTR2_DATAST_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BWTR2_DATAST_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BWTR2_DATAST_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BWTR2_DATAST_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BWTR2_BUSTURN                  ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BWTR2_BUSTURN_0                ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BWTR2_BUSTURN_1                ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BWTR2_BUSTURN_2                ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BWTR2_BUSTURN_3                ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BWTR2_ACCMOD                   ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BWTR2_ACCMOD_0                 ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BWTR2_ACCMOD_1                 ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BWTR3 register  ******************/
+#define  FMC_BWTR3_ADDSET                   ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BWTR3_ADDSET_0                 ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BWTR3_ADDSET_1                 ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BWTR3_ADDSET_2                 ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BWTR3_ADDSET_3                 ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BWTR3_ADDHLD                   ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BWTR3_ADDHLD_0                 ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BWTR3_ADDHLD_1                 ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BWTR3_ADDHLD_2                 ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BWTR3_ADDHLD_3                 ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BWTR3_DATAST                   ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BWTR3_DATAST_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BWTR3_DATAST_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BWTR3_DATAST_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BWTR3_DATAST_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BWTR3_DATAST_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BWTR3_DATAST_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BWTR3_DATAST_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BWTR3_DATAST_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BWTR3_BUSTURN                  ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BWTR3_BUSTURN_0                ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BWTR3_BUSTURN_1                ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BWTR3_BUSTURN_2                ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BWTR3_BUSTURN_3                ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BWTR3_ACCMOD                   ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BWTR3_ACCMOD_0                 ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BWTR3_ACCMOD_1                 ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BWTR4 register  ******************/
+#define  FMC_BWTR4_ADDSET                   ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BWTR4_ADDSET_0                 ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BWTR4_ADDSET_1                 ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BWTR4_ADDSET_2                 ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BWTR4_ADDSET_3                 ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BWTR4_ADDHLD                   ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BWTR4_ADDHLD_0                 ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BWTR4_ADDHLD_1                 ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BWTR4_ADDHLD_2                 ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BWTR4_ADDHLD_3                 ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BWTR4_DATAST                   ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BWTR4_DATAST_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BWTR4_DATAST_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BWTR4_DATAST_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BWTR4_DATAST_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BWTR4_DATAST_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BWTR4_DATAST_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BWTR4_DATAST_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BWTR4_DATAST_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BWTR4_BUSTURN                  ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BWTR4_BUSTURN_0                ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BWTR4_BUSTURN_1                ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BWTR4_BUSTURN_2                ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BWTR4_BUSTURN_3                ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BWTR4_ACCMOD                   ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BWTR4_ACCMOD_0                 ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BWTR4_ACCMOD_1                 ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_PCR register  *******************/
+#define  FMC_PCR_PWAITEN                   ((uint32_t)0x00000002)        /*!<Wait feature enable bit                   */
+#define  FMC_PCR_PBKEN                     ((uint32_t)0x00000004)        /*!<PC Card/NAND Flash memory bank enable bit */
+#define  FMC_PCR_PTYP                      ((uint32_t)0x00000008)        /*!<Memory type                               */
+
+#define  FMC_PCR_PWID                      ((uint32_t)0x00000030)        /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define  FMC_PCR_PWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_PCR_PWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_PCR_ECCEN                     ((uint32_t)0x00000040)        /*!<ECC computation logic enable bit          */
+
+#define  FMC_PCR_TCLR                      ((uint32_t)0x00001E00)        /*!<TCLR[3:0] bits (CLE to RE delay)          */
+#define  FMC_PCR_TCLR_0                    ((uint32_t)0x00000200)        /*!<Bit 0 */
+#define  FMC_PCR_TCLR_1                    ((uint32_t)0x00000400)        /*!<Bit 1 */
+#define  FMC_PCR_TCLR_2                    ((uint32_t)0x00000800)        /*!<Bit 2 */
+#define  FMC_PCR_TCLR_3                    ((uint32_t)0x00001000)        /*!<Bit 3 */
+
+#define  FMC_PCR_TAR                       ((uint32_t)0x0001E000)        /*!<TAR[3:0] bits (ALE to RE delay)           */
+#define  FMC_PCR_TAR_0                     ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  FMC_PCR_TAR_1                     ((uint32_t)0x00004000)        /*!<Bit 1 */
+#define  FMC_PCR_TAR_2                     ((uint32_t)0x00008000)        /*!<Bit 2 */
+#define  FMC_PCR_TAR_3                     ((uint32_t)0x00010000)        /*!<Bit 3 */
+
+#define  FMC_PCR_ECCPS                     ((uint32_t)0x000E0000)        /*!<ECCPS[2:0] bits (ECC page size)           */
+#define  FMC_PCR_ECCPS_0                   ((uint32_t)0x00020000)        /*!<Bit 0 */
+#define  FMC_PCR_ECCPS_1                   ((uint32_t)0x00040000)        /*!<Bit 1 */
+#define  FMC_PCR_ECCPS_2                   ((uint32_t)0x00080000)        /*!<Bit 2 */
+
+/*******************  Bit definition for FMC_SR register  *******************/
+#define  FMC_SR_IRS                        ((uint32_t)0x01)              /*!<Interrupt Rising Edge status                */
+#define  FMC_SR_ILS                        ((uint32_t)0x02)              /*!<Interrupt Level status                      */
+#define  FMC_SR_IFS                        ((uint32_t)0x04)              /*!<Interrupt Falling Edge status               */
+#define  FMC_SR_IREN                       ((uint32_t)0x08)              /*!<Interrupt Rising Edge detection Enable bit  */
+#define  FMC_SR_ILEN                       ((uint32_t)0x10)              /*!<Interrupt Level detection Enable bit        */
+#define  FMC_SR_IFEN                       ((uint32_t)0x20)              /*!<Interrupt Falling Edge detection Enable bit */
+#define  FMC_SR_FEMPT                      ((uint32_t)0x40)              /*!<FIFO empty                                  */
+
+/******************  Bit definition for FMC_PMEM register  ******************/
+#define  FMC_PMEM_MEMSET3                  ((uint32_t)0x000000FF)        /*!<MEMSET3[7:0] bits (Common memory 3 setup time) */
+#define  FMC_PMEM_MEMSET3_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_PMEM_MEMSET3_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_PMEM_MEMSET3_2                ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_PMEM_MEMSET3_3                ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  FMC_PMEM_MEMSET3_4                ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  FMC_PMEM_MEMSET3_5                ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  FMC_PMEM_MEMSET3_6                ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  FMC_PMEM_MEMSET3_7                ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  FMC_PMEM_MEMWAIT3                 ((uint32_t)0x0000FF00)        /*!<MEMWAIT3[7:0] bits (Common memory 3 wait time) */
+#define  FMC_PMEM_MEMWAIT3_0               ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_PMEM_MEMWAIT3_1               ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_PMEM_MEMWAIT3_2               ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_PMEM_MEMWAIT3_3               ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_PMEM_MEMWAIT3_4               ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_PMEM_MEMWAIT3_5               ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_PMEM_MEMWAIT3_6               ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_PMEM_MEMWAIT3_7               ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_PMEM_MEMHOLD3                 ((uint32_t)0x00FF0000)        /*!<MEMHOLD3[7:0] bits (Common memory 3 hold time) */
+#define  FMC_PMEM_MEMHOLD3_0               ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_PMEM_MEMHOLD3_1               ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_PMEM_MEMHOLD3_2               ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_PMEM_MEMHOLD3_3               ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  FMC_PMEM_MEMHOLD3_4               ((uint32_t)0x00100000)        /*!<Bit 4 */
+#define  FMC_PMEM_MEMHOLD3_5               ((uint32_t)0x00200000)        /*!<Bit 5 */
+#define  FMC_PMEM_MEMHOLD3_6               ((uint32_t)0x00400000)        /*!<Bit 6 */
+#define  FMC_PMEM_MEMHOLD3_7               ((uint32_t)0x00800000)        /*!<Bit 7 */
+
+#define  FMC_PMEM_MEMHIZ3                  ((uint32_t)0xFF000000)        /*!<MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */
+#define  FMC_PMEM_MEMHIZ3_0                ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_PMEM_MEMHIZ3_1                ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_PMEM_MEMHIZ3_2                ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_PMEM_MEMHIZ3_3                ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  FMC_PMEM_MEMHIZ3_4                ((uint32_t)0x10000000)        /*!<Bit 4 */
+#define  FMC_PMEM_MEMHIZ3_5                ((uint32_t)0x20000000)        /*!<Bit 5 */
+#define  FMC_PMEM_MEMHIZ3_6                ((uint32_t)0x40000000)        /*!<Bit 6 */
+#define  FMC_PMEM_MEMHIZ3_7                ((uint32_t)0x80000000)        /*!<Bit 7 */
+
+/******************  Bit definition for FMC_PATT register  ******************/
+#define  FMC_PATT_ATTSET3                  ((uint32_t)0x000000FF)        /*!<ATTSET3[7:0] bits (Attribute memory 3 setup time) */
+#define  FMC_PATT_ATTSET3_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_PATT_ATTSET3_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_PATT_ATTSET3_2                ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_PATT_ATTSET3_3                ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  FMC_PATT_ATTSET3_4                ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  FMC_PATT_ATTSET3_5                ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  FMC_PATT_ATTSET3_6                ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  FMC_PATT_ATTSET3_7                ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  FMC_PATT_ATTWAIT3                 ((uint32_t)0x0000FF00)        /*!<ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */
+#define  FMC_PATT_ATTWAIT3_0               ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_PATT_ATTWAIT3_1               ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_PATT_ATTWAIT3_2               ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_PATT_ATTWAIT3_3               ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_PATT_ATTWAIT3_4               ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_PATT_ATTWAIT3_5               ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_PATT_ATTWAIT3_6               ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_PATT_ATTWAIT3_7               ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_PATT_ATTHOLD3                 ((uint32_t)0x00FF0000)        /*!<ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */
+#define  FMC_PATT_ATTHOLD3_0               ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_PATT_ATTHOLD3_1               ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_PATT_ATTHOLD3_2               ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_PATT_ATTHOLD3_3               ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  FMC_PATT_ATTHOLD3_4               ((uint32_t)0x00100000)        /*!<Bit 4 */
+#define  FMC_PATT_ATTHOLD3_5               ((uint32_t)0x00200000)        /*!<Bit 5 */
+#define  FMC_PATT_ATTHOLD3_6               ((uint32_t)0x00400000)        /*!<Bit 6 */
+#define  FMC_PATT_ATTHOLD3_7               ((uint32_t)0x00800000)        /*!<Bit 7 */
+
+#define  FMC_PATT_ATTHIZ3                  ((uint32_t)0xFF000000)        /*!<ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */
+#define  FMC_PATT_ATTHIZ3_0                ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_PATT_ATTHIZ3_1                ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_PATT_ATTHIZ3_2                ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_PATT_ATTHIZ3_3                ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  FMC_PATT_ATTHIZ3_4                ((uint32_t)0x10000000)        /*!<Bit 4 */
+#define  FMC_PATT_ATTHIZ3_5                ((uint32_t)0x20000000)        /*!<Bit 5 */
+#define  FMC_PATT_ATTHIZ3_6                ((uint32_t)0x40000000)        /*!<Bit 6 */
+#define  FMC_PATT_ATTHIZ3_7                ((uint32_t)0x80000000)        /*!<Bit 7 */
+
+/******************  Bit definition for FMC_ECCR register  ******************/
+#define  FMC_ECCR_ECC3                     ((uint32_t)0xFFFFFFFF)        /*!<ECC result */
+
+/******************  Bit definition for FMC_SDCR1 register  ******************/
+#define  FMC_SDCR1_NC                       ((uint32_t)0x00000003)        /*!<NC[1:0] bits (Number of column bits) */
+#define  FMC_SDCR1_NC_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDCR1_NC_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_NR                       ((uint32_t)0x0000000C)        /*!<NR[1:0] bits (Number of row bits) */
+#define  FMC_SDCR1_NR_0                     ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_SDCR1_NR_1                     ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_MWID                     ((uint32_t)0x00000030)        /*!<NR[1:0] bits (Number of row bits) */
+#define  FMC_SDCR1_MWID_0                   ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_SDCR1_MWID_1                   ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_NB                       ((uint32_t)0x00000040)        /*!<Number of internal bank */
+
+#define  FMC_SDCR1_CAS                      ((uint32_t)0x00000180)        /*!<CAS[1:0] bits (CAS latency) */
+#define  FMC_SDCR1_CAS_0                    ((uint32_t)0x00000080)        /*!<Bit 0 */
+#define  FMC_SDCR1_CAS_1                    ((uint32_t)0x00000100)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_WP                       ((uint32_t)0x00000200)        /*!<Write protection */
+
+#define  FMC_SDCR1_SDCLK                    ((uint32_t)0x00000C00)        /*!<SDRAM clock configuration */
+#define  FMC_SDCR1_SDCLK_0                  ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  FMC_SDCR1_SDCLK_1                  ((uint32_t)0x00000800)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_RBURST                   ((uint32_t)0x00001000)        /*!<Read burst */
+
+#define  FMC_SDCR1_RPIPE                    ((uint32_t)0x00006000)        /*!<Write protection */
+#define  FMC_SDCR1_RPIPE_0                  ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  FMC_SDCR1_RPIPE_1                  ((uint32_t)0x00004000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_SDCR2 register  ******************/
+#define  FMC_SDCR2_NC                       ((uint32_t)0x00000003)        /*!<NC[1:0] bits (Number of column bits) */
+#define  FMC_SDCR2_NC_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDCR2_NC_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_NR                       ((uint32_t)0x0000000C)        /*!<NR[1:0] bits (Number of row bits) */
+#define  FMC_SDCR2_NR_0                     ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_SDCR2_NR_1                     ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_MWID                     ((uint32_t)0x00000030)        /*!<NR[1:0] bits (Number of row bits) */
+#define  FMC_SDCR2_MWID_0                   ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_SDCR2_MWID_1                   ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_NB                       ((uint32_t)0x00000040)        /*!<Number of internal bank */
+
+#define  FMC_SDCR2_CAS                      ((uint32_t)0x00000180)        /*!<CAS[1:0] bits (CAS latency) */
+#define  FMC_SDCR2_CAS_0                    ((uint32_t)0x00000080)        /*!<Bit 0 */
+#define  FMC_SDCR2_CAS_1                    ((uint32_t)0x00000100)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_WP                       ((uint32_t)0x00000200)        /*!<Write protection */
+
+#define  FMC_SDCR2_SDCLK                    ((uint32_t)0x00000C00)        /*!<SDCLK[1:0] (SDRAM clock configuration) */
+#define  FMC_SDCR2_SDCLK_0                  ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  FMC_SDCR2_SDCLK_1                  ((uint32_t)0x00000800)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_RBURST                   ((uint32_t)0x00001000)        /*!<Read burst */
+
+#define  FMC_SDCR2_RPIPE                    ((uint32_t)0x00006000)        /*!<RPIPE[1:0](Read pipe) */
+#define  FMC_SDCR2_RPIPE_0                  ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  FMC_SDCR2_RPIPE_1                  ((uint32_t)0x00004000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_SDTR1 register  ******************/
+#define  FMC_SDTR1_TMRD                     ((uint32_t)0x0000000F)        /*!<TMRD[3:0] bits (Load mode register to active) */
+#define  FMC_SDTR1_TMRD_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDTR1_TMRD_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_SDTR1_TMRD_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_SDTR1_TMRD_3                   ((uint32_t)0x00000008)        /*!<Bit 3 */
+                                            
+#define  FMC_SDTR1_TXSR                     ((uint32_t)0x000000F0)        /*!<TXSR[3:0] bits (Exit self refresh) */
+#define  FMC_SDTR1_TXSR_0                   ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_SDTR1_TXSR_1                   ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_SDTR1_TXSR_2                   ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_SDTR1_TXSR_3                   ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_SDTR1_TRAS                     ((uint32_t)0x00000F00)        /*!<TRAS[3:0] bits (Self refresh time) */
+#define  FMC_SDTR1_TRAS_0                   ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_SDTR1_TRAS_1                   ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_SDTR1_TRAS_2                   ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_SDTR1_TRAS_3                   ((uint32_t)0x00000800)        /*!<Bit 3 */
+
+#define  FMC_SDTR1_TRC                      ((uint32_t)0x0000F000)        /*!<TRC[2:0] bits (Row cycle delay) */
+#define  FMC_SDTR1_TRC_0                    ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  FMC_SDTR1_TRC_1                    ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  FMC_SDTR1_TRC_2                    ((uint32_t)0x00004000)        /*!<Bit 2 */
+
+#define  FMC_SDTR1_TWR                      ((uint32_t)0x000F0000)        /*!<TRC[2:0] bits (Write recovery delay) */
+#define  FMC_SDTR1_TWR_0                    ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_SDTR1_TWR_1                    ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_SDTR1_TWR_2                    ((uint32_t)0x00040000)        /*!<Bit 2 */
+
+#define  FMC_SDTR1_TRP                      ((uint32_t)0x00F00000)        /*!<TRP[2:0] bits (Row precharge delay) */
+#define  FMC_SDTR1_TRP_0                    ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_SDTR1_TRP_1                    ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_SDTR1_TRP_2                    ((uint32_t)0x00400000)        /*!<Bit 2 */
+
+#define  FMC_SDTR1_TRCD                     ((uint32_t)0x0F000000)        /*!<TRP[2:0] bits (Row to column delay) */
+#define  FMC_SDTR1_TRCD_0                   ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_SDTR1_TRCD_1                   ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_SDTR1_TRCD_2                   ((uint32_t)0x04000000)        /*!<Bit 2 */
+
+/******************  Bit definition for FMC_SDTR2 register  ******************/
+#define  FMC_SDTR2_TMRD                     ((uint32_t)0x0000000F)        /*!<TMRD[3:0] bits (Load mode register to active) */
+#define  FMC_SDTR2_TMRD_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDTR2_TMRD_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_SDTR2_TMRD_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_SDTR2_TMRD_3                   ((uint32_t)0x00000008)        /*!<Bit 3 */
+                                            
+#define  FMC_SDTR2_TXSR                     ((uint32_t)0x000000F0)        /*!<TXSR[3:0] bits (Exit self refresh) */
+#define  FMC_SDTR2_TXSR_0                   ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_SDTR2_TXSR_1                   ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_SDTR2_TXSR_2                   ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_SDTR2_TXSR_3                   ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_SDTR2_TRAS                     ((uint32_t)0x00000F00)        /*!<TRAS[3:0] bits (Self refresh time) */
+#define  FMC_SDTR2_TRAS_0                   ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_SDTR2_TRAS_1                   ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_SDTR2_TRAS_2                   ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_SDTR2_TRAS_3                   ((uint32_t)0x00000800)        /*!<Bit 3 */
+
+#define  FMC_SDTR2_TRC                      ((uint32_t)0x0000F000)        /*!<TRC[2:0] bits (Row cycle delay) */
+#define  FMC_SDTR2_TRC_0                    ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  FMC_SDTR2_TRC_1                    ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  FMC_SDTR2_TRC_2                    ((uint32_t)0x00004000)        /*!<Bit 2 */
+
+#define  FMC_SDTR2_TWR                      ((uint32_t)0x000F0000)        /*!<TRC[2:0] bits (Write recovery delay) */
+#define  FMC_SDTR2_TWR_0                    ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_SDTR2_TWR_1                    ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_SDTR2_TWR_2                    ((uint32_t)0x00040000)        /*!<Bit 2 */
+
+#define  FMC_SDTR2_TRP                      ((uint32_t)0x00F00000)        /*!<TRP[2:0] bits (Row precharge delay) */
+#define  FMC_SDTR2_TRP_0                    ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_SDTR2_TRP_1                    ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_SDTR2_TRP_2                    ((uint32_t)0x00400000)        /*!<Bit 2 */
+
+#define  FMC_SDTR2_TRCD                     ((uint32_t)0x0F000000)        /*!<TRP[2:0] bits (Row to column delay) */
+#define  FMC_SDTR2_TRCD_0                   ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_SDTR2_TRCD_1                   ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_SDTR2_TRCD_2                   ((uint32_t)0x04000000)        /*!<Bit 2 */
+
+/******************  Bit definition for FMC_SDCMR register  ******************/
+#define  FMC_SDCMR_MODE                     ((uint32_t)0x00000007)        /*!<MODE[2:0] bits (Command mode) */
+#define  FMC_SDCMR_MODE_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDCMR_MODE_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_SDCMR_MODE_2                   ((uint32_t)0x00000003)        /*!<Bit 2 */
+                                            
+#define  FMC_SDCMR_CTB2                     ((uint32_t)0x00000008)        /*!<Command target 2 */
+
+#define  FMC_SDCMR_CTB1                     ((uint32_t)0x00000010)        /*!<Command target 1 */
+
+#define  FMC_SDCMR_NRFS                     ((uint32_t)0x000001E0)        /*!<NRFS[3:0] bits (Number of auto-refresh) */
+#define  FMC_SDCMR_NRFS_0                   ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  FMC_SDCMR_NRFS_1                   ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  FMC_SDCMR_NRFS_2                   ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  FMC_SDCMR_NRFS_3                   ((uint32_t)0x00000100)        /*!<Bit 3 */
+
+#define  FMC_SDCMR_MRD                      ((uint32_t)0x003FFE00)        /*!<MRD[12:0] bits (Mode register definition) */
+
+/******************  Bit definition for FMC_SDRTR register  ******************/
+#define  FMC_SDRTR_CRE                      ((uint32_t)0x00000001)        /*!<Clear refresh error flag */
+
+#define  FMC_SDRTR_COUNT                    ((uint32_t)0x00003FFE)        /*!<COUNT[12:0] bits (Refresh timer count) */
+
+#define  FMC_SDRTR_REIE                     ((uint32_t)0x00004000)        /*!<RES interupt enable */
+
+/******************  Bit definition for FMC_SDSR register  ******************/
+#define  FMC_SDSR_RE                        ((uint32_t)0x00000001)        /*!<Refresh error flag */
+
+#define  FMC_SDSR_MODES1                    ((uint32_t)0x00000006)        /*!<MODES1[1:0]bits (Status mode for bank 1) */
+#define  FMC_SDSR_MODES1_0                  ((uint32_t)0x00000002)        /*!<Bit 0 */
+#define  FMC_SDSR_MODES1_1                  ((uint32_t)0x00000004)        /*!<Bit 1 */
+
+#define  FMC_SDSR_MODES2                    ((uint32_t)0x00000018)        /*!<MODES2[1:0]bits (Status mode for bank 2) */
+#define  FMC_SDSR_MODES2_0                  ((uint32_t)0x00000008)        /*!<Bit 0 */
+#define  FMC_SDSR_MODES2_1                  ((uint32_t)0x00000010)        /*!<Bit 1 */
+
+#define  FMC_SDSR_BUSY                      ((uint32_t)0x00000020)        /*!<Busy status */
+
+/******************************************************************************/
+/*                                                                            */
+/*                            General Purpose I/O                             */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bits definition for GPIO_MODER register  *****************/
+#define GPIO_MODER_MODER0                    ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0                  ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1                  ((uint32_t)0x00000002)
+
+#define GPIO_MODER_MODER1                    ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0                  ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1                  ((uint32_t)0x00000008)
+
+#define GPIO_MODER_MODER2                    ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0                  ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1                  ((uint32_t)0x00000020)
+
+#define GPIO_MODER_MODER3                    ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0                  ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1                  ((uint32_t)0x00000080)
+
+#define GPIO_MODER_MODER4                    ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0                  ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1                  ((uint32_t)0x00000200)
+
+#define GPIO_MODER_MODER5                    ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0                  ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1                  ((uint32_t)0x00000800)
+
+#define GPIO_MODER_MODER6                    ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0                  ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1                  ((uint32_t)0x00002000)
+
+#define GPIO_MODER_MODER7                    ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0                  ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1                  ((uint32_t)0x00008000)
+
+#define GPIO_MODER_MODER8                    ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0                  ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1                  ((uint32_t)0x00020000)
+
+#define GPIO_MODER_MODER9                    ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0                  ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1                  ((uint32_t)0x00080000)
+
+#define GPIO_MODER_MODER10                   ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0                 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1                 ((uint32_t)0x00200000)
+
+#define GPIO_MODER_MODER11                   ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0                 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1                 ((uint32_t)0x00800000)
+
+#define GPIO_MODER_MODER12                   ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0                 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1                 ((uint32_t)0x02000000)
+
+#define GPIO_MODER_MODER13                   ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0                 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1                 ((uint32_t)0x08000000)
+
+#define GPIO_MODER_MODER14                   ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0                 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1                 ((uint32_t)0x20000000)
+
+#define GPIO_MODER_MODER15                   ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0                 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1                 ((uint32_t)0x80000000)
+
+/******************  Bits definition for GPIO_OTYPER register  ****************/
+#define GPIO_OTYPER_OT_0                     ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1                     ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2                     ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3                     ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4                     ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5                     ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6                     ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7                     ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8                     ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9                     ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10                    ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11                    ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12                    ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13                    ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14                    ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15                    ((uint32_t)0x00008000)
+
+/******************  Bits definition for GPIO_OSPEEDR register  ***************/
+#define GPIO_OSPEEDER_OSPEEDR0               ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0             ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1             ((uint32_t)0x00000002)
+
+#define GPIO_OSPEEDER_OSPEEDR1               ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0             ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1             ((uint32_t)0x00000008)
+
+#define GPIO_OSPEEDER_OSPEEDR2               ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0             ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1             ((uint32_t)0x00000020)
+
+#define GPIO_OSPEEDER_OSPEEDR3               ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0             ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1             ((uint32_t)0x00000080)
+
+#define GPIO_OSPEEDER_OSPEEDR4               ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0             ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1             ((uint32_t)0x00000200)
+
+#define GPIO_OSPEEDER_OSPEEDR5               ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0             ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1             ((uint32_t)0x00000800)
+
+#define GPIO_OSPEEDER_OSPEEDR6               ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0             ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1             ((uint32_t)0x00002000)
+
+#define GPIO_OSPEEDER_OSPEEDR7               ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0             ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1             ((uint32_t)0x00008000)
+
+#define GPIO_OSPEEDER_OSPEEDR8               ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0             ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1             ((uint32_t)0x00020000)
+
+#define GPIO_OSPEEDER_OSPEEDR9               ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0             ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1             ((uint32_t)0x00080000)
+
+#define GPIO_OSPEEDER_OSPEEDR10              ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0            ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1            ((uint32_t)0x00200000)
+
+#define GPIO_OSPEEDER_OSPEEDR11              ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0            ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1            ((uint32_t)0x00800000)
+
+#define GPIO_OSPEEDER_OSPEEDR12              ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0            ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1            ((uint32_t)0x02000000)
+
+#define GPIO_OSPEEDER_OSPEEDR13              ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0            ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1            ((uint32_t)0x08000000)
+
+#define GPIO_OSPEEDER_OSPEEDR14              ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0            ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1            ((uint32_t)0x20000000)
+
+#define GPIO_OSPEEDER_OSPEEDR15              ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0            ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1            ((uint32_t)0x80000000)
+
+/******************  Bits definition for GPIO_PUPDR register  *****************/
+#define GPIO_PUPDR_PUPDR0                    ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0                  ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1                  ((uint32_t)0x00000002)
+
+#define GPIO_PUPDR_PUPDR1                    ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0                  ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1                  ((uint32_t)0x00000008)
+
+#define GPIO_PUPDR_PUPDR2                    ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0                  ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1                  ((uint32_t)0x00000020)
+
+#define GPIO_PUPDR_PUPDR3                    ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0                  ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1                  ((uint32_t)0x00000080)
+
+#define GPIO_PUPDR_PUPDR4                    ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0                  ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1                  ((uint32_t)0x00000200)
+
+#define GPIO_PUPDR_PUPDR5                    ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0                  ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1                  ((uint32_t)0x00000800)
+
+#define GPIO_PUPDR_PUPDR6                    ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0                  ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1                  ((uint32_t)0x00002000)
+
+#define GPIO_PUPDR_PUPDR7                    ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0                  ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1                  ((uint32_t)0x00008000)
+
+#define GPIO_PUPDR_PUPDR8                    ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0                  ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1                  ((uint32_t)0x00020000)
+
+#define GPIO_PUPDR_PUPDR9                    ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0                  ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1                  ((uint32_t)0x00080000)
+
+#define GPIO_PUPDR_PUPDR10                   ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0                 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1                 ((uint32_t)0x00200000)
+
+#define GPIO_PUPDR_PUPDR11                   ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0                 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1                 ((uint32_t)0x00800000)
+
+#define GPIO_PUPDR_PUPDR12                   ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0                 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1                 ((uint32_t)0x02000000)
+
+#define GPIO_PUPDR_PUPDR13                   ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0                 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1                 ((uint32_t)0x08000000)
+
+#define GPIO_PUPDR_PUPDR14                   ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0                 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1                 ((uint32_t)0x20000000)
+
+#define GPIO_PUPDR_PUPDR15                   ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0                 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1                 ((uint32_t)0x80000000)
+
+/******************  Bits definition for GPIO_IDR register  *******************/
+#define GPIO_IDR_IDR_0                       ((uint32_t)0x00000001)
+#define GPIO_IDR_IDR_1                       ((uint32_t)0x00000002)
+#define GPIO_IDR_IDR_2                       ((uint32_t)0x00000004)
+#define GPIO_IDR_IDR_3                       ((uint32_t)0x00000008)
+#define GPIO_IDR_IDR_4                       ((uint32_t)0x00000010)
+#define GPIO_IDR_IDR_5                       ((uint32_t)0x00000020)
+#define GPIO_IDR_IDR_6                       ((uint32_t)0x00000040)
+#define GPIO_IDR_IDR_7                       ((uint32_t)0x00000080)
+#define GPIO_IDR_IDR_8                       ((uint32_t)0x00000100)
+#define GPIO_IDR_IDR_9                       ((uint32_t)0x00000200)
+#define GPIO_IDR_IDR_10                      ((uint32_t)0x00000400)
+#define GPIO_IDR_IDR_11                      ((uint32_t)0x00000800)
+#define GPIO_IDR_IDR_12                      ((uint32_t)0x00001000)
+#define GPIO_IDR_IDR_13                      ((uint32_t)0x00002000)
+#define GPIO_IDR_IDR_14                      ((uint32_t)0x00004000)
+#define GPIO_IDR_IDR_15                      ((uint32_t)0x00008000)
+
+/******************  Bits definition for GPIO_ODR register  *******************/
+#define GPIO_ODR_ODR_0                       ((uint32_t)0x00000001)
+#define GPIO_ODR_ODR_1                       ((uint32_t)0x00000002)
+#define GPIO_ODR_ODR_2                       ((uint32_t)0x00000004)
+#define GPIO_ODR_ODR_3                       ((uint32_t)0x00000008)
+#define GPIO_ODR_ODR_4                       ((uint32_t)0x00000010)
+#define GPIO_ODR_ODR_5                       ((uint32_t)0x00000020)
+#define GPIO_ODR_ODR_6                       ((uint32_t)0x00000040)
+#define GPIO_ODR_ODR_7                       ((uint32_t)0x00000080)
+#define GPIO_ODR_ODR_8                       ((uint32_t)0x00000100)
+#define GPIO_ODR_ODR_9                       ((uint32_t)0x00000200)
+#define GPIO_ODR_ODR_10                      ((uint32_t)0x00000400)
+#define GPIO_ODR_ODR_11                      ((uint32_t)0x00000800)
+#define GPIO_ODR_ODR_12                      ((uint32_t)0x00001000)
+#define GPIO_ODR_ODR_13                      ((uint32_t)0x00002000)
+#define GPIO_ODR_ODR_14                      ((uint32_t)0x00004000)
+#define GPIO_ODR_ODR_15                      ((uint32_t)0x00008000)
+
+/******************  Bits definition for GPIO_BSRR register  ******************/
+#define GPIO_BSRR_BS_0                       ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1                       ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2                       ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3                       ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4                       ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5                       ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6                       ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7                       ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8                       ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9                       ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10                      ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11                      ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12                      ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13                      ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14                      ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15                      ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0                       ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1                       ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2                       ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3                       ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4                       ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5                       ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6                       ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7                       ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8                       ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9                       ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10                      ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11                      ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12                      ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13                      ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14                      ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15                      ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register *********************/
+#define GPIO_LCKR_LCK0                       ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1                       ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2                       ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3                       ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4                       ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5                       ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6                       ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7                       ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8                       ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9                       ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10                      ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11                      ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12                      ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13                      ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14                      ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15                      ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK                       ((uint32_t)0x00010000)
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                      Inter-integrated Circuit Interface (I2C)              */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for I2C_CR1 register  *******************/
+#define  I2C_CR1_PE                          ((uint32_t)0x00000001)        /*!< Peripheral enable                   */
+#define  I2C_CR1_TXIE                        ((uint32_t)0x00000002)        /*!< TX interrupt enable                 */
+#define  I2C_CR1_RXIE                        ((uint32_t)0x00000004)        /*!< RX interrupt enable                 */
+#define  I2C_CR1_ADDRIE                      ((uint32_t)0x00000008)        /*!< Address match interrupt enable      */
+#define  I2C_CR1_NACKIE                      ((uint32_t)0x00000010)        /*!< NACK received interrupt enable      */
+#define  I2C_CR1_STOPIE                      ((uint32_t)0x00000020)        /*!< STOP detection interrupt enable     */
+#define  I2C_CR1_TCIE                        ((uint32_t)0x00000040)        /*!< Transfer complete interrupt enable  */
+#define  I2C_CR1_ERRIE                       ((uint32_t)0x00000080)        /*!< Errors interrupt enable             */
+#define  I2C_CR1_DNF                         ((uint32_t)0x00000F00)        /*!< Digital noise filter                */
+#define  I2C_CR1_ANFOFF                      ((uint32_t)0x00001000)        /*!< Analog noise filter OFF             */
+#define  I2C_CR1_SWRST                       ((uint32_t)0x00002000)        /*!< Software reset                      */
+#define  I2C_CR1_TXDMAEN                     ((uint32_t)0x00004000)        /*!< DMA transmission requests enable    */
+#define  I2C_CR1_RXDMAEN                     ((uint32_t)0x00008000)        /*!< DMA reception requests enable       */
+#define  I2C_CR1_SBC                         ((uint32_t)0x00010000)        /*!< Slave byte control                  */
+#define  I2C_CR1_NOSTRETCH                   ((uint32_t)0x00020000)        /*!< Clock stretching disable            */
+#define  I2C_CR1_WUPEN                       ((uint32_t)0x00040000)        /*!< Wakeup from STOP enable             */
+#define  I2C_CR1_GCEN                        ((uint32_t)0x00080000)        /*!< General call enable                 */
+#define  I2C_CR1_SMBHEN                      ((uint32_t)0x00100000)        /*!< SMBus host address enable           */
+#define  I2C_CR1_SMBDEN                      ((uint32_t)0x00200000)        /*!< SMBus device default address enable */
+#define  I2C_CR1_ALERTEN                     ((uint32_t)0x00400000)        /*!< SMBus alert enable                  */
+#define  I2C_CR1_PECEN                       ((uint32_t)0x00800000)        /*!< PEC enable                          */
+
+/* Legacy define */
+#define  I2C_CR1_DFN                         I2C_CR1_DNF                   /*!< Digital noise filter                */
+
+/******************  Bit definition for I2C_CR2 register  ********************/
+#define  I2C_CR2_SADD                        ((uint32_t)0x000003FF)        /*!< Slave address (master mode)                             */
+#define  I2C_CR2_RD_WRN                      ((uint32_t)0x00000400)        /*!< Transfer direction (master mode)                        */
+#define  I2C_CR2_ADD10                       ((uint32_t)0x00000800)        /*!< 10-bit addressing mode (master mode)                    */
+#define  I2C_CR2_HEAD10R                     ((uint32_t)0x00001000)        /*!< 10-bit address header only read direction (master mode) */
+#define  I2C_CR2_START                       ((uint32_t)0x00002000)        /*!< START generation                                        */
+#define  I2C_CR2_STOP                        ((uint32_t)0x00004000)        /*!< STOP generation (master mode)                           */
+#define  I2C_CR2_NACK                        ((uint32_t)0x00008000)        /*!< NACK generation (slave mode)                            */
+#define  I2C_CR2_NBYTES                      ((uint32_t)0x00FF0000)        /*!< Number of bytes                                         */
+#define  I2C_CR2_RELOAD                      ((uint32_t)0x01000000)        /*!< NBYTES reload mode                                      */
+#define  I2C_CR2_AUTOEND                     ((uint32_t)0x02000000)        /*!< Automatic end mode (master mode)                        */
+#define  I2C_CR2_PECBYTE                     ((uint32_t)0x04000000)        /*!< Packet error checking byte                              */
+
+/*******************  Bit definition for I2C_OAR1 register  ******************/
+#define  I2C_OAR1_OA1                        ((uint32_t)0x000003FF)        /*!< Interface own address 1   */
+#define  I2C_OAR1_OA1MODE                    ((uint32_t)0x00000400)        /*!< Own address 1 10-bit mode */
+#define  I2C_OAR1_OA1EN                      ((uint32_t)0x00008000)        /*!< Own address 1 enable      */
+
+/*******************  Bit definition for I2C_OAR2 register  ******************/
+#define  I2C_OAR2_OA2                        ((uint32_t)0x000000FE)        /*!< Interface own address 2 */
+#define  I2C_OAR2_OA2MSK                     ((uint32_t)0x00000700)        /*!< Own address 2 masks     */
+#define  I2C_OAR2_OA2NOMASK                  ((uint32_t)0x00000000)        /*!< No mask */
+#define  I2C_OAR2_OA2MASK01                  ((uint32_t)0x00000100)        /*!< OA2[1] is masked, Only OA2[7:2] are compared */
+#define  I2C_OAR2_OA2MASK02                  ((uint32_t)0x00000200)        /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */
+#define  I2C_OAR2_OA2MASK03                  ((uint32_t)0x00000300)        /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */
+#define  I2C_OAR2_OA2MASK04                  ((uint32_t)0x00000400)        /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */
+#define  I2C_OAR2_OA2MASK05                  ((uint32_t)0x00000500)        /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */
+#define  I2C_OAR2_OA2MASK06                  ((uint32_t)0x00000600)        /*!< OA2[6:1] is masked, Only OA2[7] are compared */
+#define  I2C_OAR2_OA2MASK07                  ((uint32_t)0x00000700)        /*!< OA2[7:1] is masked, No comparison is done */
+#define  I2C_OAR2_OA2EN                      ((uint32_t)0x00008000)        /*!< Own address 2 enable    */
+
+/*******************  Bit definition for I2C_TIMINGR register *******************/
+#define  I2C_TIMINGR_SCLL                    ((uint32_t)0x000000FF)        /*!< SCL low period (master mode)  */
+#define  I2C_TIMINGR_SCLH                    ((uint32_t)0x0000FF00)        /*!< SCL high period (master mode) */
+#define  I2C_TIMINGR_SDADEL                  ((uint32_t)0x000F0000)        /*!< Data hold time                */
+#define  I2C_TIMINGR_SCLDEL                  ((uint32_t)0x00F00000)        /*!< Data setup time               */
+#define  I2C_TIMINGR_PRESC                   ((uint32_t)0xF0000000)        /*!< Timings prescaler             */
+
+/******************* Bit definition for I2C_TIMEOUTR register *******************/
+#define  I2C_TIMEOUTR_TIMEOUTA               ((uint32_t)0x00000FFF)        /*!< Bus timeout A                 */
+#define  I2C_TIMEOUTR_TIDLE                  ((uint32_t)0x00001000)        /*!< Idle clock timeout detection  */
+#define  I2C_TIMEOUTR_TIMOUTEN               ((uint32_t)0x00008000)        /*!< Clock timeout enable          */
+#define  I2C_TIMEOUTR_TIMEOUTB               ((uint32_t)0x0FFF0000)        /*!< Bus timeout B                 */
+#define  I2C_TIMEOUTR_TEXTEN                 ((uint32_t)0x80000000)        /*!< Extended clock timeout enable */
+
+/******************  Bit definition for I2C_ISR register  *********************/
+#define  I2C_ISR_TXE                         ((uint32_t)0x00000001)        /*!< Transmit data register empty    */
+#define  I2C_ISR_TXIS                        ((uint32_t)0x00000002)        /*!< Transmit interrupt status       */
+#define  I2C_ISR_RXNE                        ((uint32_t)0x00000004)        /*!< Receive data register not empty */
+#define  I2C_ISR_ADDR                        ((uint32_t)0x00000008)        /*!< Address matched (slave mode)    */
+#define  I2C_ISR_NACKF                       ((uint32_t)0x00000010)        /*!< NACK received flag              */
+#define  I2C_ISR_STOPF                       ((uint32_t)0x00000020)        /*!< STOP detection flag             */
+#define  I2C_ISR_TC                          ((uint32_t)0x00000040)        /*!< Transfer complete (master mode) */
+#define  I2C_ISR_TCR                         ((uint32_t)0x00000080)        /*!< Transfer complete reload        */
+#define  I2C_ISR_BERR                        ((uint32_t)0x00000100)        /*!< Bus error                       */
+#define  I2C_ISR_ARLO                        ((uint32_t)0x00000200)        /*!< Arbitration lost                */
+#define  I2C_ISR_OVR                         ((uint32_t)0x00000400)        /*!< Overrun/Underrun                */
+#define  I2C_ISR_PECERR                      ((uint32_t)0x00000800)        /*!< PEC error in reception          */
+#define  I2C_ISR_TIMEOUT                     ((uint32_t)0x00001000)        /*!< Timeout or Tlow detection flag  */
+#define  I2C_ISR_ALERT                       ((uint32_t)0x00002000)        /*!< SMBus alert                     */
+#define  I2C_ISR_BUSY                        ((uint32_t)0x00008000)        /*!< Bus busy                        */
+#define  I2C_ISR_DIR                         ((uint32_t)0x00010000)        /*!< Transfer direction (slave mode) */
+#define  I2C_ISR_ADDCODE                     ((uint32_t)0x00FE0000)        /*!< Address match code (slave mode) */
+
+/******************  Bit definition for I2C_ICR register  *********************/
+#define  I2C_ICR_ADDRCF                      ((uint32_t)0x00000008)        /*!< Address matched clear flag      */
+#define  I2C_ICR_NACKCF                      ((uint32_t)0x00000010)        /*!< NACK clear flag                 */
+#define  I2C_ICR_STOPCF                      ((uint32_t)0x00000020)        /*!< STOP detection clear flag       */
+#define  I2C_ICR_BERRCF                      ((uint32_t)0x00000100)        /*!< Bus error clear flag            */
+#define  I2C_ICR_ARLOCF                      ((uint32_t)0x00000200)        /*!< Arbitration lost clear flag     */
+#define  I2C_ICR_OVRCF                       ((uint32_t)0x00000400)        /*!< Overrun/Underrun clear flag     */
+#define  I2C_ICR_PECCF                       ((uint32_t)0x00000800)        /*!< PAC error clear flag            */
+#define  I2C_ICR_TIMOUTCF                    ((uint32_t)0x00001000)        /*!< Timeout clear flag              */
+#define  I2C_ICR_ALERTCF                     ((uint32_t)0x00002000)        /*!< Alert clear flag                */
+
+/******************  Bit definition for I2C_PECR register  *********************/
+#define  I2C_PECR_PEC                        ((uint32_t)0x000000FF)        /*!< PEC register        */
+
+/******************  Bit definition for I2C_RXDR register  *********************/
+#define  I2C_RXDR_RXDATA                     ((uint32_t)0x000000FF)        /*!< 8-bit receive data  */
+
+/******************  Bit definition for I2C_TXDR register  *********************/
+#define  I2C_TXDR_TXDATA                     ((uint32_t)0x000000FF)        /*!< 8-bit transmit data */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                           Independent WATCHDOG                             */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for IWDG_KR register  ********************/
+#define  IWDG_KR_KEY                         ((uint32_t)0xFFFF)            /*!<Key value (write only, read 0000h)  */
+
+/*******************  Bit definition for IWDG_PR register  ********************/
+#define  IWDG_PR_PR                          ((uint32_t)0x07)               /*!<PR[2:0] (Prescaler divider)         */
+#define  IWDG_PR_PR_0                        ((uint32_t)0x01)               /*!<Bit 0 */
+#define  IWDG_PR_PR_1                        ((uint32_t)0x02)               /*!<Bit 1 */
+#define  IWDG_PR_PR_2                        ((uint32_t)0x04)               /*!<Bit 2 */
+
+/*******************  Bit definition for IWDG_RLR register  *******************/
+#define  IWDG_RLR_RL                         ((uint32_t)0x0FFF)            /*!<Watchdog counter reload value        */
+
+/*******************  Bit definition for IWDG_SR register  ********************/
+#define  IWDG_SR_PVU                         ((uint32_t)0x01)               /*!< Watchdog prescaler value update */
+#define  IWDG_SR_RVU                         ((uint32_t)0x02)               /*!< Watchdog counter reload value update */
+#define  IWDG_SR_WVU                         ((uint32_t)0x04)               /*!< Watchdog counter window value update */
+
+/*******************  Bit definition for IWDG_KR register  ********************/
+#define  IWDG_WINR_WIN                       ((uint32_t)0x0FFF)             /*!< Watchdog counter window value */
+
+/******************************************************************************/
+/*                                                                            */
+/*                      LCD-TFT Display Controller (LTDC)                     */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for LTDC_SSCR register  *****************/
+
+#define LTDC_SSCR_VSH                       ((uint32_t)0x000007FF)              /*!< Vertical Synchronization Height  */
+#define LTDC_SSCR_HSW                       ((uint32_t)0x0FFF0000)              /*!< Horizontal Synchronization Width */
+
+/********************  Bit definition for LTDC_BPCR register  *****************/
+
+#define LTDC_BPCR_AVBP                      ((uint32_t)0x000007FF)              /*!< Accumulated Vertical Back Porch   */
+#define LTDC_BPCR_AHBP                      ((uint32_t)0x0FFF0000)              /*!< Accumulated Horizontal Back Porch */
+
+/********************  Bit definition for LTDC_AWCR register  *****************/
+
+#define LTDC_AWCR_AAH                       ((uint32_t)0x000007FF)              /*!< Accumulated Active heigh */
+#define LTDC_AWCR_AAW                       ((uint32_t)0x0FFF0000)              /*!< Accumulated Active Width */
+
+/********************  Bit definition for LTDC_TWCR register  *****************/
+
+#define LTDC_TWCR_TOTALH                    ((uint32_t)0x000007FF)              /*!< Total Heigh */
+#define LTDC_TWCR_TOTALW                    ((uint32_t)0x0FFF0000)              /*!< Total Width */
+
+/********************  Bit definition for LTDC_GCR register  ******************/
+
+#define LTDC_GCR_LTDCEN                     ((uint32_t)0x00000001)              /*!< LCD-TFT controller enable bit       */
+#define LTDC_GCR_DBW                        ((uint32_t)0x00000070)              /*!< Dither Blue Width                   */
+#define LTDC_GCR_DGW                        ((uint32_t)0x00000700)              /*!< Dither Green Width                  */
+#define LTDC_GCR_DRW                        ((uint32_t)0x00007000)              /*!< Dither Red Width                    */
+#define LTDC_GCR_DTEN                       ((uint32_t)0x00010000)              /*!< Dither Enable                       */
+#define LTDC_GCR_PCPOL                      ((uint32_t)0x10000000)              /*!< Pixel Clock Polarity                */
+#define LTDC_GCR_DEPOL                      ((uint32_t)0x20000000)              /*!< Data Enable Polarity                */
+#define LTDC_GCR_VSPOL                      ((uint32_t)0x40000000)              /*!< Vertical Synchronization Polarity   */
+#define LTDC_GCR_HSPOL                      ((uint32_t)0x80000000)              /*!< Horizontal Synchronization Polarity */
+
+/********************  Bit definition for LTDC_SRCR register  *****************/
+
+#define LTDC_SRCR_IMR                      ((uint32_t)0x00000001)               /*!< Immediate Reload         */
+#define LTDC_SRCR_VBR                      ((uint32_t)0x00000002)               /*!< Vertical Blanking Reload */
+
+/********************  Bit definition for LTDC_BCCR register  *****************/
+
+#define LTDC_BCCR_BCBLUE                    ((uint32_t)0x000000FF)              /*!< Background Blue value  */
+#define LTDC_BCCR_BCGREEN                   ((uint32_t)0x0000FF00)              /*!< Background Green value */
+#define LTDC_BCCR_BCRED                     ((uint32_t)0x00FF0000)              /*!< Background Red value   */
+
+/********************  Bit definition for LTDC_IER register  ******************/
+
+#define LTDC_IER_LIE                        ((uint32_t)0x00000001)              /*!< Line Interrupt Enable            */
+#define LTDC_IER_FUIE                       ((uint32_t)0x00000002)              /*!< FIFO Underrun Interrupt Enable   */
+#define LTDC_IER_TERRIE                     ((uint32_t)0x00000004)              /*!< Transfer Error Interrupt Enable  */
+#define LTDC_IER_RRIE                       ((uint32_t)0x00000008)              /*!< Register Reload interrupt enable */
+
+/********************  Bit definition for LTDC_ISR register  ******************/
+
+#define LTDC_ISR_LIF                        ((uint32_t)0x00000001)              /*!< Line Interrupt Flag */
+#define LTDC_ISR_FUIF                       ((uint32_t)0x00000002)              /*!< FIFO Underrun Interrupt Flag */
+#define LTDC_ISR_TERRIF                     ((uint32_t)0x00000004)              /*!< Transfer Error Interrupt Flag */
+#define LTDC_ISR_RRIF                       ((uint32_t)0x00000008)              /*!< Register Reload interrupt Flag */
+
+/********************  Bit definition for LTDC_ICR register  ******************/
+
+#define LTDC_ICR_CLIF                       ((uint32_t)0x00000001)              /*!< Clears the Line Interrupt Flag */
+#define LTDC_ICR_CFUIF                      ((uint32_t)0x00000002)              /*!< Clears the FIFO Underrun Interrupt Flag */
+#define LTDC_ICR_CTERRIF                    ((uint32_t)0x00000004)              /*!< Clears the Transfer Error Interrupt Flag */
+#define LTDC_ICR_CRRIF                      ((uint32_t)0x00000008)              /*!< Clears Register Reload interrupt Flag */
+
+/********************  Bit definition for LTDC_LIPCR register  ****************/
+
+#define LTDC_LIPCR_LIPOS                    ((uint32_t)0x000007FF)              /*!< Line Interrupt Position */
+
+/********************  Bit definition for LTDC_CPSR register  *****************/
+
+#define LTDC_CPSR_CYPOS                     ((uint32_t)0x0000FFFF)              /*!< Current Y Position */
+#define LTDC_CPSR_CXPOS                     ((uint32_t)0xFFFF0000)              /*!< Current X Position */
+
+/********************  Bit definition for LTDC_CDSR register  *****************/
+
+#define LTDC_CDSR_VDES                      ((uint32_t)0x00000001)              /*!< Vertical Data Enable Status       */
+#define LTDC_CDSR_HDES                      ((uint32_t)0x00000002)              /*!< Horizontal Data Enable Status     */
+#define LTDC_CDSR_VSYNCS                    ((uint32_t)0x00000004)              /*!< Vertical Synchronization Status   */
+#define LTDC_CDSR_HSYNCS                    ((uint32_t)0x00000008)              /*!< Horizontal Synchronization Status */
+
+/********************  Bit definition for LTDC_LxCR register  *****************/
+
+#define LTDC_LxCR_LEN                       ((uint32_t)0x00000001)              /*!< Layer Enable              */
+#define LTDC_LxCR_COLKEN                    ((uint32_t)0x00000002)              /*!< Color Keying Enable       */
+#define LTDC_LxCR_CLUTEN                    ((uint32_t)0x00000010)              /*!< Color Lockup Table Enable */
+
+/********************  Bit definition for LTDC_LxWHPCR register  **************/
+
+#define LTDC_LxWHPCR_WHSTPOS                ((uint32_t)0x00000FFF)              /*!< Window Horizontal Start Position */
+#define LTDC_LxWHPCR_WHSPPOS                ((uint32_t)0xFFFF0000)              /*!< Window Horizontal Stop Position  */
+
+/********************  Bit definition for LTDC_LxWVPCR register  **************/
+
+#define LTDC_LxWVPCR_WVSTPOS                ((uint32_t)0x00000FFF)              /*!< Window Vertical Start Position */
+#define LTDC_LxWVPCR_WVSPPOS                ((uint32_t)0xFFFF0000)              /*!< Window Vertical Stop Position  */
+
+/********************  Bit definition for LTDC_LxCKCR register  ***************/
+
+#define LTDC_LxCKCR_CKBLUE                  ((uint32_t)0x000000FF)              /*!< Color Key Blue value  */
+#define LTDC_LxCKCR_CKGREEN                 ((uint32_t)0x0000FF00)              /*!< Color Key Green value */
+#define LTDC_LxCKCR_CKRED                   ((uint32_t)0x00FF0000)              /*!< Color Key Red value   */
+
+/********************  Bit definition for LTDC_LxPFCR register  ***************/
+
+#define LTDC_LxPFCR_PF                      ((uint32_t)0x00000007)              /*!< Pixel Format */
+
+/********************  Bit definition for LTDC_LxCACR register  ***************/
+
+#define LTDC_LxCACR_CONSTA                  ((uint32_t)0x000000FF)              /*!< Constant Alpha */
+
+/********************  Bit definition for LTDC_LxDCCR register  ***************/
+
+#define LTDC_LxDCCR_DCBLUE                  ((uint32_t)0x000000FF)              /*!< Default Color Blue  */
+#define LTDC_LxDCCR_DCGREEN                 ((uint32_t)0x0000FF00)              /*!< Default Color Green */
+#define LTDC_LxDCCR_DCRED                   ((uint32_t)0x00FF0000)              /*!< Default Color Red   */
+#define LTDC_LxDCCR_DCALPHA                 ((uint32_t)0xFF000000)              /*!< Default Color Alpha */
+                                
+/********************  Bit definition for LTDC_LxBFCR register  ***************/
+
+#define LTDC_LxBFCR_BF2                     ((uint32_t)0x00000007)              /*!< Blending Factor 2 */
+#define LTDC_LxBFCR_BF1                     ((uint32_t)0x00000700)              /*!< Blending Factor 1 */
+
+/********************  Bit definition for LTDC_LxCFBAR register  **************/
+
+#define LTDC_LxCFBAR_CFBADD                 ((uint32_t)0xFFFFFFFF)              /*!< Color Frame Buffer Start Address */
+
+/********************  Bit definition for LTDC_LxCFBLR register  **************/
+
+#define LTDC_LxCFBLR_CFBLL                  ((uint32_t)0x00001FFF)              /*!< Color Frame Buffer Line Length    */
+#define LTDC_LxCFBLR_CFBP                   ((uint32_t)0x1FFF0000)              /*!< Color Frame Buffer Pitch in bytes */
+
+/********************  Bit definition for LTDC_LxCFBLNR register  *************/
+
+#define LTDC_LxCFBLNR_CFBLNBR               ((uint32_t)0x000007FF)              /*!< Frame Buffer Line Number */
+
+/********************  Bit definition for LTDC_LxCLUTWR register  *************/
+
+#define LTDC_LxCLUTWR_BLUE                  ((uint32_t)0x000000FF)              /*!< Blue value   */
+#define LTDC_LxCLUTWR_GREEN                 ((uint32_t)0x0000FF00)              /*!< Green value  */
+#define LTDC_LxCLUTWR_RED                   ((uint32_t)0x00FF0000)              /*!< Red value    */
+#define LTDC_LxCLUTWR_CLUTADD               ((uint32_t)0xFF000000)              /*!< CLUT address */
+
+/******************************************************************************/
+/*                                                                            */
+/*                             Power Control                                  */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for PWR_CR1 register  ********************/
+#define  PWR_CR1_LPDS                         ((uint32_t)0x00000001)     /*!< Low-Power Deepsleep                 */
+#define  PWR_CR1_PDDS                         ((uint32_t)0x00000002)     /*!< Power Down Deepsleep                */
+#define  PWR_CR1_CSBF                         ((uint32_t)0x00000008)     /*!< Clear Standby Flag                  */
+#define  PWR_CR1_PVDE                         ((uint32_t)0x00000010)     /*!< Power Voltage Detector Enable       */
+
+#define  PWR_CR1_PLS                          ((uint32_t)0x000000E0)     /*!< PLS[2:0] bits (PVD Level Selection) */
+#define  PWR_CR1_PLS_0                        ((uint32_t)0x00000020)     /*!< Bit 0 */
+#define  PWR_CR1_PLS_1                        ((uint32_t)0x00000040)     /*!< Bit 1 */
+#define  PWR_CR1_PLS_2                        ((uint32_t)0x00000080)     /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define  PWR_CR1_PLS_LEV0                     ((uint32_t)0x00000000)     /*!< PVD level 0 */
+#define  PWR_CR1_PLS_LEV1                     ((uint32_t)0x00000020)     /*!< PVD level 1 */
+#define  PWR_CR1_PLS_LEV2                     ((uint32_t)0x00000040)     /*!< PVD level 2 */
+#define  PWR_CR1_PLS_LEV3                     ((uint32_t)0x00000060)     /*!< PVD level 3 */
+#define  PWR_CR1_PLS_LEV4                     ((uint32_t)0x00000080)     /*!< PVD level 4 */
+#define  PWR_CR1_PLS_LEV5                     ((uint32_t)0x000000A0)     /*!< PVD level 5 */
+#define  PWR_CR1_PLS_LEV6                     ((uint32_t)0x000000C0)     /*!< PVD level 6 */
+#define  PWR_CR1_PLS_LEV7                     ((uint32_t)0x000000E0)     /*!< PVD level 7 */
+
+#define  PWR_CR1_DBP                          ((uint32_t)0x00000100)     /*!< Disable Backup Domain write protection                     */
+#define  PWR_CR1_FPDS                         ((uint32_t)0x00000200)     /*!< Flash power down in Stop mode                              */
+
+#define  PWR_CR1_LPUDS                        ((uint32_t)0x00000400)     /*!< Low-power regulator in deepsleep under-drive mode          */
+#define  PWR_CR1_MRUDS                        ((uint32_t)0x00000800)     /*!< Main regulator in deepsleep under-drive mode               */
+
+#define  PWR_CR1_ADCDC1                       ((uint32_t)0x00002000)     /*!< Refer to AN4073 on how to use this bit */ 
+
+#define  PWR_CR1_VOS                          ((uint32_t)0x0000C000)     /*!< VOS[1:0] bits (Regulator voltage scaling output selection) */
+#define  PWR_CR1_VOS_0                        ((uint32_t)0x00004000)     /*!< Bit 0 */
+#define  PWR_CR1_VOS_1                        ((uint32_t)0x00008000)     /*!< Bit 1 */
+
+#define  PWR_CR1_ODEN                         ((uint32_t)0x00010000)     /*!< Over Drive enable                   */
+#define  PWR_CR1_ODSWEN                       ((uint32_t)0x00020000)     /*!< Over Drive switch enabled           */
+#define  PWR_CR1_UDEN                         ((uint32_t)0x000C0000)     /*!< Under Drive enable in stop mode     */
+#define  PWR_CR1_UDEN_0                       ((uint32_t)0x00040000)     /*!< Bit 0                               */
+#define  PWR_CR1_UDEN_1                       ((uint32_t)0x00080000)     /*!< Bit 1                               */
+
+/*******************  Bit definition for PWR_CSR1 register  ********************/
+#define  PWR_CSR1_WUIF                        ((uint32_t)0x00000001)     /*!< Wake up internal Flag                            */
+#define  PWR_CSR1_SBF                         ((uint32_t)0x00000002)     /*!< Standby Flag                                     */
+#define  PWR_CSR1_PVDO                        ((uint32_t)0x00000004)     /*!< PVD Output                                       */
+#define  PWR_CSR1_BRR                         ((uint32_t)0x00000008)     /*!< Backup regulator ready                           */
+#define  PWR_CSR1_BRE                         ((uint32_t)0x00000200)     /*!< Backup regulator enable                          */
+#define  PWR_CSR1_VOSRDY                      ((uint32_t)0x00004000)     /*!< Regulator voltage scaling output selection ready */
+
+#define  PWR_CSR1_ODRDY                       ((uint32_t)0x00010000)     /*!< Over Drive generator ready                       */
+#define  PWR_CSR1_ODSWRDY                     ((uint32_t)0x00020000)     /*!< Over Drive Switch ready                          */
+#define  PWR_CSR1_UDSWRDY                     ((uint32_t)0x000C0000)     /*!< Under Drive ready                                */
+
+/********************  Bit definition for PWR_CR2 register  ********************/
+#define  PWR_CR2_CWUPF1                         ((uint32_t)0x00000001)     /*!< Clear Wakeup Pin Flag for PA0      */
+#define  PWR_CR2_CWUPF2                         ((uint32_t)0x00000002)     /*!< Clear Wakeup Pin Flag for PA2      */
+#define  PWR_CR2_CWUPF3                         ((uint32_t)0x00000004)     /*!< Clear Wakeup Pin Flag for PC1      */
+#define  PWR_CR2_CWUPF4                         ((uint32_t)0x00000008)     /*!< Clear Wakeup Pin Flag for PC13     */
+#define  PWR_CR2_CWUPF5                         ((uint32_t)0x00000010)     /*!< Clear Wakeup Pin Flag for PI8      */
+#define  PWR_CR2_CWUPF6                         ((uint32_t)0x00000020)     /*!< Clear Wakeup Pin Flag for PI11     */
+
+#define  PWR_CR2_WUPP1                          ((uint32_t)0x00000100)     /*!< Wakeup Pin Polarity bit for PA0    */
+#define  PWR_CR2_WUPP2                          ((uint32_t)0x00000200)     /*!< Wakeup Pin Polarity bit for PA2    */
+#define  PWR_CR2_WUPP3                          ((uint32_t)0x00000400)     /*!< Wakeup Pin Polarity bit for PC1    */
+#define  PWR_CR2_WUPP4                          ((uint32_t)0x00000800)     /*!< Wakeup Pin Polarity bit for PC13   */
+#define  PWR_CR2_WUPP5                          ((uint32_t)0x00001000)     /*!< Wakeup Pin Polarity bit for PI8    */
+#define  PWR_CR2_WUPP6                          ((uint32_t)0x00002000)     /*!< Wakeup Pin Polarity bit for PI11   */
+
+/*******************  Bit definition for PWR_CSR2 register  ********************/
+#define  PWR_CSR2_WUPF1                         ((uint32_t)0x00000001)     /*!< Wakeup Pin Flag for PA0            */
+#define  PWR_CSR2_WUPF2                         ((uint32_t)0x00000002)     /*!< Wakeup Pin Flag for PA2            */
+#define  PWR_CSR2_WUPF3                         ((uint32_t)0x00000004)     /*!< Wakeup Pin Flag for PC1            */
+#define  PWR_CSR2_WUPF4                         ((uint32_t)0x00000008)     /*!< Wakeup Pin Flag for PC13           */
+#define  PWR_CSR2_WUPF5                         ((uint32_t)0x00000010)     /*!< Wakeup Pin Flag for PI8            */
+#define  PWR_CSR2_WUPF6                         ((uint32_t)0x00000020)     /*!< Wakeup Pin Flag for PI11           */
+
+#define  PWR_CSR2_EWUP1                         ((uint32_t)0x00000100)     /*!< Enable Wakeup Pin PA0              */
+#define  PWR_CSR2_EWUP2                         ((uint32_t)0x00000200)     /*!< Enable Wakeup Pin PA2              */
+#define  PWR_CSR2_EWUP3                         ((uint32_t)0x00000400)     /*!< Enable Wakeup Pin PC1              */
+#define  PWR_CSR2_EWUP4                         ((uint32_t)0x00000800)     /*!< Enable Wakeup Pin PC13             */
+#define  PWR_CSR2_EWUP5                         ((uint32_t)0x00001000)     /*!< Enable Wakeup Pin PI8              */
+#define  PWR_CSR2_EWUP6                         ((uint32_t)0x00002000)     /*!< Enable Wakeup Pin PI11             */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    QUADSPI                                 */
+/*                                                                            */
+/******************************************************************************/
+/*****************  Bit definition for QUADSPI_CR register  *******************/
+#define  QUADSPI_CR_EN                           ((uint32_t)0x00000001)            /*!< Enable                            */
+#define  QUADSPI_CR_ABORT                        ((uint32_t)0x00000002)            /*!< Abort request                     */
+#define  QUADSPI_CR_DMAEN                        ((uint32_t)0x00000004)            /*!< DMA Enable                        */
+#define  QUADSPI_CR_TCEN                         ((uint32_t)0x00000008)            /*!< Timeout Counter Enable            */
+#define  QUADSPI_CR_SSHIFT                       ((uint32_t)0x00000010)            /*!< Sample Shift                      */
+#define  QUADSPI_CR_DFM                          ((uint32_t)0x00000040)            /*!< Dual Flash Mode                   */
+#define  QUADSPI_CR_FSEL                         ((uint32_t)0x00000080)            /*!< Flash Select                      */
+#define  QUADSPI_CR_FTHRES                       ((uint32_t)0x00000F00)            /*!< FTHRES[3:0] FIFO Level            */
+#define  QUADSPI_CR_FTHRES_0                     ((uint32_t)0x00000100)            /*!< Bit 0 */
+#define  QUADSPI_CR_FTHRES_1                     ((uint32_t)0x00000200)            /*!< Bit 1 */
+#define  QUADSPI_CR_FTHRES_2                     ((uint32_t)0x00000400)            /*!< Bit 2 */
+#define  QUADSPI_CR_FTHRES_3                     ((uint32_t)0x00000800)            /*!< Bit 3 */
+#define  QUADSPI_CR_TEIE                         ((uint32_t)0x00010000)            /*!< Transfer Error Interrupt Enable    */
+#define  QUADSPI_CR_TCIE                         ((uint32_t)0x00020000)            /*!< Transfer Complete Interrupt Enable */
+#define  QUADSPI_CR_FTIE                         ((uint32_t)0x00040000)            /*!< FIFO Threshold Interrupt Enable    */
+#define  QUADSPI_CR_SMIE                         ((uint32_t)0x00080000)            /*!< Status Match Interrupt Enable      */
+#define  QUADSPI_CR_TOIE                         ((uint32_t)0x00100000)            /*!< TimeOut Interrupt Enable           */
+#define  QUADSPI_CR_APMS                         ((uint32_t)0x00400000)            /*!< Bit 1                              */
+#define  QUADSPI_CR_PMM                          ((uint32_t)0x00800000)            /*!< Polling Match Mode                 */
+#define  QUADSPI_CR_PRESCALER                    ((uint32_t)0xFF000000)            /*!< PRESCALER[7:0] Clock prescaler     */
+#define  QUADSPI_CR_PRESCALER_0                  ((uint32_t)0x01000000)            /*!< Bit 0 */
+#define  QUADSPI_CR_PRESCALER_1                  ((uint32_t)0x02000000)            /*!< Bit 1 */
+#define  QUADSPI_CR_PRESCALER_2                  ((uint32_t)0x04000000)            /*!< Bit 2 */
+#define  QUADSPI_CR_PRESCALER_3                  ((uint32_t)0x08000000)            /*!< Bit 3 */
+#define  QUADSPI_CR_PRESCALER_4                  ((uint32_t)0x10000000)            /*!< Bit 4 */
+#define  QUADSPI_CR_PRESCALER_5                  ((uint32_t)0x20000000)            /*!< Bit 5 */
+#define  QUADSPI_CR_PRESCALER_6                  ((uint32_t)0x40000000)            /*!< Bit 6 */
+#define  QUADSPI_CR_PRESCALER_7                  ((uint32_t)0x80000000)            /*!< Bit 7 */
+
+/*****************  Bit definition for QUADSPI_DCR register  ******************/
+#define  QUADSPI_DCR_CKMODE                      ((uint32_t)0x00000001)            /*!< Mode 0 / Mode 3                 */
+#define  QUADSPI_DCR_CSHT                        ((uint32_t)0x00000700)            /*!< CSHT[2:0]: ChipSelect High Time */
+#define  QUADSPI_DCR_CSHT_0                      ((uint32_t)0x00000100)            /*!< Bit 0 */
+#define  QUADSPI_DCR_CSHT_1                      ((uint32_t)0x00000200)            /*!< Bit 1 */
+#define  QUADSPI_DCR_CSHT_2                      ((uint32_t)0x00000400)            /*!< Bit 2 */
+#define  QUADSPI_DCR_FSIZE                       ((uint32_t)0x001F0000)            /*!< FSIZE[4:0]: Flash Size          */
+#define  QUADSPI_DCR_FSIZE_0                     ((uint32_t)0x00010000)            /*!< Bit 0 */
+#define  QUADSPI_DCR_FSIZE_1                     ((uint32_t)0x00020000)            /*!< Bit 1 */
+#define  QUADSPI_DCR_FSIZE_2                     ((uint32_t)0x00040000)            /*!< Bit 2 */
+#define  QUADSPI_DCR_FSIZE_3                     ((uint32_t)0x00080000)            /*!< Bit 3 */
+#define  QUADSPI_DCR_FSIZE_4                     ((uint32_t)0x00100000)            /*!< Bit 4 */
+
+/******************  Bit definition for QUADSPI_SR register  *******************/
+#define  QUADSPI_SR_TEF                          ((uint32_t)0x00000001)             /*!< Transfer Error Flag    */
+#define  QUADSPI_SR_TCF                          ((uint32_t)0x00000002)             /*!< Transfer Complete Flag */
+#define  QUADSPI_SR_FTF                          ((uint32_t)0x00000004)             /*!< FIFO Threshlod Flag    */
+#define  QUADSPI_SR_SMF                          ((uint32_t)0x00000008)             /*!< Status Match Flag      */
+#define  QUADSPI_SR_TOF                          ((uint32_t)0x00000010)             /*!< Timeout Flag           */
+#define  QUADSPI_SR_BUSY                         ((uint32_t)0x00000020)             /*!< Busy                   */
+#define  QUADSPI_SR_FLEVEL                       ((uint32_t)0x00001F00)             /*!< FIFO Threshlod Flag    */
+#define  QUADSPI_SR_FLEVEL_0                     ((uint32_t)0x00000100)             /*!< Bit 0 */
+#define  QUADSPI_SR_FLEVEL_1                     ((uint32_t)0x00000200)             /*!< Bit 1 */
+#define  QUADSPI_SR_FLEVEL_2                     ((uint32_t)0x00000400)             /*!< Bit 2 */
+#define  QUADSPI_SR_FLEVEL_3                     ((uint32_t)0x00000800)             /*!< Bit 3 */
+#define  QUADSPI_SR_FLEVEL_4                     ((uint32_t)0x00001000)             /*!< Bit 4 */
+
+/******************  Bit definition for QUADSPI_FCR register  ******************/
+#define  QUADSPI_FCR_CTEF                        ((uint32_t)0x00000001)             /*!< Clear Transfer Error Flag    */
+#define  QUADSPI_FCR_CTCF                        ((uint32_t)0x00000002)             /*!< Clear Transfer Complete Flag */
+#define  QUADSPI_FCR_CSMF                        ((uint32_t)0x00000008)             /*!< Clear Status Match Flag      */
+#define  QUADSPI_FCR_CTOF                        ((uint32_t)0x00000010)             /*!< Clear Timeout Flag           */
+
+/******************  Bit definition for QUADSPI_DLR register  ******************/
+#define  QUADSPI_DLR_DL                        ((uint32_t)0xFFFFFFFF)               /*!< DL[31:0]: Data Length */
+
+/******************  Bit definition for QUADSPI_CCR register  ******************/
+#define  QUADSPI_CCR_INSTRUCTION                  ((uint32_t)0x000000FF)            /*!< INSTRUCTION[7:0]: Instruction    */
+#define  QUADSPI_CCR_INSTRUCTION_0                ((uint32_t)0x00000001)            /*!< Bit 0 */
+#define  QUADSPI_CCR_INSTRUCTION_1                ((uint32_t)0x00000002)            /*!< Bit 1 */
+#define  QUADSPI_CCR_INSTRUCTION_2                ((uint32_t)0x00000004)            /*!< Bit 2 */
+#define  QUADSPI_CCR_INSTRUCTION_3                ((uint32_t)0x00000008)            /*!< Bit 3 */
+#define  QUADSPI_CCR_INSTRUCTION_4                ((uint32_t)0x00000010)            /*!< Bit 4 */
+#define  QUADSPI_CCR_INSTRUCTION_5                ((uint32_t)0x00000020)            /*!< Bit 5 */
+#define  QUADSPI_CCR_INSTRUCTION_6                ((uint32_t)0x00000040)            /*!< Bit 6 */
+#define  QUADSPI_CCR_INSTRUCTION_7                ((uint32_t)0x00000080)            /*!< Bit 7 */
+#define  QUADSPI_CCR_IMODE                        ((uint32_t)0x00000300)            /*!< IMODE[1:0]: Instruction Mode      */
+#define  QUADSPI_CCR_IMODE_0                      ((uint32_t)0x00000100)            /*!< Bit 0 */
+#define  QUADSPI_CCR_IMODE_1                      ((uint32_t)0x00000200)            /*!< Bit 1 */
+#define  QUADSPI_CCR_ADMODE                       ((uint32_t)0x00000C00)            /*!< ADMODE[1:0]: Address Mode         */
+#define  QUADSPI_CCR_ADMODE_0                     ((uint32_t)0x00000400)            /*!< Bit 0 */
+#define  QUADSPI_CCR_ADMODE_1                     ((uint32_t)0x00000800)            /*!< Bit 1 */
+#define  QUADSPI_CCR_ADSIZE                       ((uint32_t)0x00003000)            /*!< ADSIZE[1:0]: Address Size         */
+#define  QUADSPI_CCR_ADSIZE_0                     ((uint32_t)0x00001000)            /*!< Bit 0 */
+#define  QUADSPI_CCR_ADSIZE_1                     ((uint32_t)0x00002000)            /*!< Bit 1 */
+#define  QUADSPI_CCR_ABMODE                       ((uint32_t)0x0000C000)            /*!< ABMODE[1:0]: Alternate Bytes Mode */
+#define  QUADSPI_CCR_ABMODE_0                     ((uint32_t)0x00004000)            /*!< Bit 0 */
+#define  QUADSPI_CCR_ABMODE_1                     ((uint32_t)0x00008000)            /*!< Bit 1 */
+#define  QUADSPI_CCR_ABSIZE                       ((uint32_t)0x00030000)            /*!< ABSIZE[1:0]: Instruction Mode     */
+#define  QUADSPI_CCR_ABSIZE_0                     ((uint32_t)0x00010000)            /*!< Bit 0 */
+#define  QUADSPI_CCR_ABSIZE_1                     ((uint32_t)0x00020000)            /*!< Bit 1 */
+#define  QUADSPI_CCR_DCYC                         ((uint32_t)0x007C0000)            /*!< DCYC[4:0]: Dummy Cycles           */
+#define  QUADSPI_CCR_DCYC_0                       ((uint32_t)0x00040000)            /*!< Bit 0 */
+#define  QUADSPI_CCR_DCYC_1                       ((uint32_t)0x00080000)            /*!< Bit 1 */
+#define  QUADSPI_CCR_DCYC_2                       ((uint32_t)0x00100000)            /*!< Bit 2 */
+#define  QUADSPI_CCR_DCYC_3                       ((uint32_t)0x00200000)            /*!< Bit 3 */
+#define  QUADSPI_CCR_DCYC_4                       ((uint32_t)0x00400000)            /*!< Bit 4 */
+#define  QUADSPI_CCR_DMODE                        ((uint32_t)0x03000000)            /*!< DMODE[1:0]: Data Mode              */
+#define  QUADSPI_CCR_DMODE_0                      ((uint32_t)0x01000000)            /*!< Bit 0 */
+#define  QUADSPI_CCR_DMODE_1                      ((uint32_t)0x02000000)            /*!< Bit 1 */
+#define  QUADSPI_CCR_FMODE                        ((uint32_t)0x0C000000)            /*!< FMODE[1:0]: Functional Mode        */
+#define  QUADSPI_CCR_FMODE_0                      ((uint32_t)0x04000000)            /*!< Bit 0 */
+#define  QUADSPI_CCR_FMODE_1                      ((uint32_t)0x08000000)            /*!< Bit 1 */
+#define  QUADSPI_CCR_SIOO                         ((uint32_t)0x10000000)            /*!< SIOO: Send Instruction Only Once Mode */
+#define  QUADSPI_CCR_DHHC                         ((uint32_t)0x40000000)            /*!< DHHC: Delay Half Hclk Cycle           */
+#define  QUADSPI_CCR_DDRM                         ((uint32_t)0x80000000)            /*!< DDRM: Double Data Rate Mode           */ 
+/******************  Bit definition for QUADSPI_AR register  *******************/
+#define  QUADSPI_AR_ADDRESS                       ((uint32_t)0xFFFFFFFF)            /*!< ADDRESS[31:0]: Address */
+
+/******************  Bit definition for QUADSPI_ABR register  ******************/
+#define  QUADSPI_ABR_ALTERNATE                    ((uint32_t)0xFFFFFFFF)            /*!< ALTERNATE[31:0]: Alternate Bytes */
+
+/******************  Bit definition for QUADSPI_DR register  *******************/
+#define  QUADSPI_DR_DATA                          ((uint32_t)0xFFFFFFFF)            /*!< DATA[31:0]: Data */
+
+/******************  Bit definition for QUADSPI_PSMKR register  ****************/
+#define  QUADSPI_PSMKR_MASK                       ((uint32_t)0xFFFFFFFF)            /*!< MASK[31:0]: Status Mask */
+
+/******************  Bit definition for QUADSPI_PSMAR register  ****************/
+#define  QUADSPI_PSMAR_MATCH                      ((uint32_t)0xFFFFFFFF)            /*!< MATCH[31:0]: Status Match */
+
+/******************  Bit definition for QUADSPI_PIR register  *****************/
+#define  QUADSPI_PIR_INTERVAL                     ((uint32_t)0x0000FFFF)            /*!< INTERVAL[15:0]: Polling Interval */
+
+/******************  Bit definition for QUADSPI_LPTR register  *****************/
+#define  QUADSPI_LPTR_TIMEOUT                     ((uint32_t)0x0000FFFF)            /*!< TIMEOUT[15:0]: Timeout period */
+
+/******************************************************************************/
+/*                                                                            */
+/*                         Reset and Clock Control            */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for RCC_CR register  ********************/
+#define  RCC_CR_HSION                        ((uint32_t)0x00000001)
+#define  RCC_CR_HSIRDY                       ((uint32_t)0x00000002)
+
+#define  RCC_CR_HSITRIM                      ((uint32_t)0x000000F8)
+#define  RCC_CR_HSITRIM_0                    ((uint32_t)0x00000008) /*!<Bit 0 */
+#define  RCC_CR_HSITRIM_1                    ((uint32_t)0x00000010) /*!<Bit 1 */
+#define  RCC_CR_HSITRIM_2                    ((uint32_t)0x00000020) /*!<Bit 2 */
+#define  RCC_CR_HSITRIM_3                    ((uint32_t)0x00000040) /*!<Bit 3 */
+#define  RCC_CR_HSITRIM_4                    ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define  RCC_CR_HSICAL                       ((uint32_t)0x0000FF00)
+#define  RCC_CR_HSICAL_0                     ((uint32_t)0x00000100) /*!<Bit 0 */
+#define  RCC_CR_HSICAL_1                     ((uint32_t)0x00000200) /*!<Bit 1 */
+#define  RCC_CR_HSICAL_2                     ((uint32_t)0x00000400) /*!<Bit 2 */
+#define  RCC_CR_HSICAL_3                     ((uint32_t)0x00000800) /*!<Bit 3 */
+#define  RCC_CR_HSICAL_4                     ((uint32_t)0x00001000) /*!<Bit 4 */
+#define  RCC_CR_HSICAL_5                     ((uint32_t)0x00002000) /*!<Bit 5 */
+#define  RCC_CR_HSICAL_6                     ((uint32_t)0x00004000) /*!<Bit 6 */
+#define  RCC_CR_HSICAL_7                     ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define  RCC_CR_HSEON                        ((uint32_t)0x00010000)
+#define  RCC_CR_HSERDY                       ((uint32_t)0x00020000)
+#define  RCC_CR_HSEBYP                       ((uint32_t)0x00040000)
+#define  RCC_CR_CSSON                        ((uint32_t)0x00080000)
+#define  RCC_CR_PLLON                        ((uint32_t)0x01000000)
+#define  RCC_CR_PLLRDY                       ((uint32_t)0x02000000)
+#define  RCC_CR_PLLI2SON                     ((uint32_t)0x04000000)
+#define  RCC_CR_PLLI2SRDY                    ((uint32_t)0x08000000)
+#define  RCC_CR_PLLSAION                     ((uint32_t)0x10000000)
+#define  RCC_CR_PLLSAIRDY                    ((uint32_t)0x20000000)
+
+/********************  Bit definition for RCC_PLLCFGR register  ***************/
+#define  RCC_PLLCFGR_PLLM                    ((uint32_t)0x0000003F)
+#define  RCC_PLLCFGR_PLLM_0                  ((uint32_t)0x00000001)
+#define  RCC_PLLCFGR_PLLM_1                  ((uint32_t)0x00000002)
+#define  RCC_PLLCFGR_PLLM_2                  ((uint32_t)0x00000004)
+#define  RCC_PLLCFGR_PLLM_3                  ((uint32_t)0x00000008)
+#define  RCC_PLLCFGR_PLLM_4                  ((uint32_t)0x00000010)
+#define  RCC_PLLCFGR_PLLM_5                  ((uint32_t)0x00000020)
+
+#define  RCC_PLLCFGR_PLLN                     ((uint32_t)0x00007FC0)
+#define  RCC_PLLCFGR_PLLN_0                   ((uint32_t)0x00000040)
+#define  RCC_PLLCFGR_PLLN_1                   ((uint32_t)0x00000080)
+#define  RCC_PLLCFGR_PLLN_2                   ((uint32_t)0x00000100)
+#define  RCC_PLLCFGR_PLLN_3                   ((uint32_t)0x00000200)
+#define  RCC_PLLCFGR_PLLN_4                   ((uint32_t)0x00000400)
+#define  RCC_PLLCFGR_PLLN_5                   ((uint32_t)0x00000800)
+#define  RCC_PLLCFGR_PLLN_6                   ((uint32_t)0x00001000)
+#define  RCC_PLLCFGR_PLLN_7                   ((uint32_t)0x00002000)
+#define  RCC_PLLCFGR_PLLN_8                   ((uint32_t)0x00004000)
+
+#define  RCC_PLLCFGR_PLLP                    ((uint32_t)0x00030000)
+#define  RCC_PLLCFGR_PLLP_0                  ((uint32_t)0x00010000)
+#define  RCC_PLLCFGR_PLLP_1                  ((uint32_t)0x00020000)
+
+#define  RCC_PLLCFGR_PLLSRC                  ((uint32_t)0x00400000)
+#define  RCC_PLLCFGR_PLLSRC_HSE              ((uint32_t)0x00400000)
+#define  RCC_PLLCFGR_PLLSRC_HSI              ((uint32_t)0x00000000)
+
+#define  RCC_PLLCFGR_PLLQ                    ((uint32_t)0x0F000000)
+#define  RCC_PLLCFGR_PLLQ_0                  ((uint32_t)0x01000000)
+#define  RCC_PLLCFGR_PLLQ_1                  ((uint32_t)0x02000000)
+#define  RCC_PLLCFGR_PLLQ_2                  ((uint32_t)0x04000000)
+#define  RCC_PLLCFGR_PLLQ_3                  ((uint32_t)0x08000000)
+
+
+/********************  Bit definition for RCC_CFGR register  ******************/
+/*!< SW configuration */
+#define  RCC_CFGR_SW                         ((uint32_t)0x00000003)        /*!< SW[1:0] bits (System clock Switch) */
+#define  RCC_CFGR_SW_0                       ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  RCC_CFGR_SW_1                       ((uint32_t)0x00000002)        /*!< Bit 1 */
+
+#define  RCC_CFGR_SW_HSI                     ((uint32_t)0x00000000)        /*!< HSI selected as system clock */
+#define  RCC_CFGR_SW_HSE                     ((uint32_t)0x00000001)        /*!< HSE selected as system clock */
+#define  RCC_CFGR_SW_PLL                     ((uint32_t)0x00000002)        /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define  RCC_CFGR_SWS                        ((uint32_t)0x0000000C)        /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define  RCC_CFGR_SWS_0                      ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  RCC_CFGR_SWS_1                      ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  RCC_CFGR_SWS_HSI                    ((uint32_t)0x00000000)        /*!< HSI oscillator used as system clock */
+#define  RCC_CFGR_SWS_HSE                    ((uint32_t)0x00000004)        /*!< HSE oscillator used as system clock */
+#define  RCC_CFGR_SWS_PLL                    ((uint32_t)0x00000008)        /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define  RCC_CFGR_HPRE                       ((uint32_t)0x000000F0)        /*!< HPRE[3:0] bits (AHB prescaler) */
+#define  RCC_CFGR_HPRE_0                     ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  RCC_CFGR_HPRE_1                     ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  RCC_CFGR_HPRE_2                     ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  RCC_CFGR_HPRE_3                     ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  RCC_CFGR_HPRE_DIV1                  ((uint32_t)0x00000000)        /*!< SYSCLK not divided */
+#define  RCC_CFGR_HPRE_DIV2                  ((uint32_t)0x00000080)        /*!< SYSCLK divided by 2 */
+#define  RCC_CFGR_HPRE_DIV4                  ((uint32_t)0x00000090)        /*!< SYSCLK divided by 4 */
+#define  RCC_CFGR_HPRE_DIV8                  ((uint32_t)0x000000A0)        /*!< SYSCLK divided by 8 */
+#define  RCC_CFGR_HPRE_DIV16                 ((uint32_t)0x000000B0)        /*!< SYSCLK divided by 16 */
+#define  RCC_CFGR_HPRE_DIV64                 ((uint32_t)0x000000C0)        /*!< SYSCLK divided by 64 */
+#define  RCC_CFGR_HPRE_DIV128                ((uint32_t)0x000000D0)        /*!< SYSCLK divided by 128 */
+#define  RCC_CFGR_HPRE_DIV256                ((uint32_t)0x000000E0)        /*!< SYSCLK divided by 256 */
+#define  RCC_CFGR_HPRE_DIV512                ((uint32_t)0x000000F0)        /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define  RCC_CFGR_PPRE1                      ((uint32_t)0x00001C00)        /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define  RCC_CFGR_PPRE1_0                    ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  RCC_CFGR_PPRE1_1                    ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  RCC_CFGR_PPRE1_2                    ((uint32_t)0x00001000)        /*!< Bit 2 */
+
+#define  RCC_CFGR_PPRE1_DIV1                 ((uint32_t)0x00000000)        /*!< HCLK not divided */
+#define  RCC_CFGR_PPRE1_DIV2                 ((uint32_t)0x00001000)        /*!< HCLK divided by 2 */
+#define  RCC_CFGR_PPRE1_DIV4                 ((uint32_t)0x00001400)        /*!< HCLK divided by 4 */
+#define  RCC_CFGR_PPRE1_DIV8                 ((uint32_t)0x00001800)        /*!< HCLK divided by 8 */
+#define  RCC_CFGR_PPRE1_DIV16                ((uint32_t)0x00001C00)        /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define  RCC_CFGR_PPRE2                      ((uint32_t)0x0000E000)        /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define  RCC_CFGR_PPRE2_0                    ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define  RCC_CFGR_PPRE2_1                    ((uint32_t)0x00004000)        /*!< Bit 1 */
+#define  RCC_CFGR_PPRE2_2                    ((uint32_t)0x00008000)        /*!< Bit 2 */
+
+#define  RCC_CFGR_PPRE2_DIV1                 ((uint32_t)0x00000000)        /*!< HCLK not divided */
+#define  RCC_CFGR_PPRE2_DIV2                 ((uint32_t)0x00008000)        /*!< HCLK divided by 2 */
+#define  RCC_CFGR_PPRE2_DIV4                 ((uint32_t)0x0000A000)        /*!< HCLK divided by 4 */
+#define  RCC_CFGR_PPRE2_DIV8                 ((uint32_t)0x0000C000)        /*!< HCLK divided by 8 */
+#define  RCC_CFGR_PPRE2_DIV16                ((uint32_t)0x0000E000)        /*!< HCLK divided by 16 */
+
+/*!< RTCPRE configuration */
+#define  RCC_CFGR_RTCPRE                     ((uint32_t)0x001F0000)
+#define  RCC_CFGR_RTCPRE_0                   ((uint32_t)0x00010000)
+#define  RCC_CFGR_RTCPRE_1                   ((uint32_t)0x00020000)
+#define  RCC_CFGR_RTCPRE_2                   ((uint32_t)0x00040000)
+#define  RCC_CFGR_RTCPRE_3                   ((uint32_t)0x00080000)
+#define  RCC_CFGR_RTCPRE_4                   ((uint32_t)0x00100000)
+
+/*!< MCO1 configuration */
+#define  RCC_CFGR_MCO1                       ((uint32_t)0x00600000)
+#define  RCC_CFGR_MCO1_0                     ((uint32_t)0x00200000)
+#define  RCC_CFGR_MCO1_1                     ((uint32_t)0x00400000)
+
+#define  RCC_CFGR_I2SSRC                     ((uint32_t)0x00800000)
+
+#define  RCC_CFGR_MCO1PRE                    ((uint32_t)0x07000000)
+#define  RCC_CFGR_MCO1PRE_0                  ((uint32_t)0x01000000)
+#define  RCC_CFGR_MCO1PRE_1                  ((uint32_t)0x02000000)
+#define  RCC_CFGR_MCO1PRE_2                  ((uint32_t)0x04000000)
+
+#define  RCC_CFGR_MCO2PRE                    ((uint32_t)0x38000000)
+#define  RCC_CFGR_MCO2PRE_0                  ((uint32_t)0x08000000)
+#define  RCC_CFGR_MCO2PRE_1                  ((uint32_t)0x10000000)
+#define  RCC_CFGR_MCO2PRE_2                  ((uint32_t)0x20000000)
+
+#define  RCC_CFGR_MCO2                       ((uint32_t)0xC0000000)
+#define  RCC_CFGR_MCO2_0                     ((uint32_t)0x40000000)
+#define  RCC_CFGR_MCO2_1                     ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_CIR register  *******************/
+#define  RCC_CIR_LSIRDYF                     ((uint32_t)0x00000001)
+#define  RCC_CIR_LSERDYF                     ((uint32_t)0x00000002)
+#define  RCC_CIR_HSIRDYF                     ((uint32_t)0x00000004)
+#define  RCC_CIR_HSERDYF                     ((uint32_t)0x00000008)
+#define  RCC_CIR_PLLRDYF                     ((uint32_t)0x00000010)
+#define  RCC_CIR_PLLI2SRDYF                  ((uint32_t)0x00000020)
+#define  RCC_CIR_PLLSAIRDYF                  ((uint32_t)0x00000040)
+#define  RCC_CIR_CSSF                        ((uint32_t)0x00000080)
+#define  RCC_CIR_LSIRDYIE                    ((uint32_t)0x00000100)
+#define  RCC_CIR_LSERDYIE                    ((uint32_t)0x00000200)
+#define  RCC_CIR_HSIRDYIE                    ((uint32_t)0x00000400)
+#define  RCC_CIR_HSERDYIE                    ((uint32_t)0x00000800)
+#define  RCC_CIR_PLLRDYIE                    ((uint32_t)0x00001000)
+#define  RCC_CIR_PLLI2SRDYIE                 ((uint32_t)0x00002000)
+#define  RCC_CIR_PLLSAIRDYIE                 ((uint32_t)0x00004000)
+#define  RCC_CIR_LSIRDYC                     ((uint32_t)0x00010000)
+#define  RCC_CIR_LSERDYC                     ((uint32_t)0x00020000)
+#define  RCC_CIR_HSIRDYC                     ((uint32_t)0x00040000)
+#define  RCC_CIR_HSERDYC                     ((uint32_t)0x00080000)
+#define  RCC_CIR_PLLRDYC                     ((uint32_t)0x00100000)
+#define  RCC_CIR_PLLI2SRDYC                  ((uint32_t)0x00200000)
+#define  RCC_CIR_PLLSAIRDYC                  ((uint32_t)0x00400000)
+#define  RCC_CIR_CSSC                        ((uint32_t)0x00800000)
+
+/********************  Bit definition for RCC_AHB1RSTR register  **************/
+#define  RCC_AHB1RSTR_GPIOARST               ((uint32_t)0x00000001)
+#define  RCC_AHB1RSTR_GPIOBRST               ((uint32_t)0x00000002)
+#define  RCC_AHB1RSTR_GPIOCRST               ((uint32_t)0x00000004)
+#define  RCC_AHB1RSTR_GPIODRST               ((uint32_t)0x00000008)
+#define  RCC_AHB1RSTR_GPIOERST               ((uint32_t)0x00000010)
+#define  RCC_AHB1RSTR_GPIOFRST               ((uint32_t)0x00000020)
+#define  RCC_AHB1RSTR_GPIOGRST               ((uint32_t)0x00000040)
+#define  RCC_AHB1RSTR_GPIOHRST               ((uint32_t)0x00000080)
+#define  RCC_AHB1RSTR_GPIOIRST               ((uint32_t)0x00000100)
+#define  RCC_AHB1RSTR_GPIOJRST               ((uint32_t)0x00000200)
+#define  RCC_AHB1RSTR_GPIOKRST               ((uint32_t)0x00000400)
+#define  RCC_AHB1RSTR_CRCRST                 ((uint32_t)0x00001000)
+#define  RCC_AHB1RSTR_DMA1RST                ((uint32_t)0x00200000)
+#define  RCC_AHB1RSTR_DMA2RST                ((uint32_t)0x00400000)
+#define  RCC_AHB1RSTR_DMA2DRST               ((uint32_t)0x00800000)
+#define  RCC_AHB1RSTR_ETHMACRST              ((uint32_t)0x02000000)
+#define  RCC_AHB1RSTR_OTGHRST                ((uint32_t)0x20000000)
+
+/********************  Bit definition for RCC_AHB2RSTR register  **************/
+#define  RCC_AHB2RSTR_DCMIRST                ((uint32_t)0x00000001)
+#define  RCC_AHB2RSTR_RNGRST                 ((uint32_t)0x00000040)
+#define  RCC_AHB2RSTR_OTGFSRST               ((uint32_t)0x00000080)
+
+/********************  Bit definition for RCC_AHB3RSTR register  **************/
+
+#define  RCC_AHB3RSTR_FMCRST                ((uint32_t)0x00000001)
+#define  RCC_AHB3RSTR_QSPIRST               ((uint32_t)0x00000002)
+
+/********************  Bit definition for RCC_APB1RSTR register  **************/
+#define  RCC_APB1RSTR_TIM2RST                ((uint32_t)0x00000001)
+#define  RCC_APB1RSTR_TIM3RST                ((uint32_t)0x00000002)
+#define  RCC_APB1RSTR_TIM4RST                ((uint32_t)0x00000004)
+#define  RCC_APB1RSTR_TIM5RST                ((uint32_t)0x00000008)
+#define  RCC_APB1RSTR_TIM6RST                ((uint32_t)0x00000010)
+#define  RCC_APB1RSTR_TIM7RST                ((uint32_t)0x00000020)
+#define  RCC_APB1RSTR_TIM12RST               ((uint32_t)0x00000040)
+#define  RCC_APB1RSTR_TIM13RST               ((uint32_t)0x00000080)
+#define  RCC_APB1RSTR_TIM14RST               ((uint32_t)0x00000100)
+#define  RCC_APB1RSTR_LPTIM1RST              ((uint32_t)0x00000200)
+#define  RCC_APB1RSTR_WWDGRST                ((uint32_t)0x00000800)
+#define  RCC_APB1RSTR_SPI2RST                ((uint32_t)0x00004000)
+#define  RCC_APB1RSTR_SPI3RST                ((uint32_t)0x00008000)
+#define  RCC_APB1RSTR_SPDIFRXRST             ((uint32_t)0x00010000)
+#define  RCC_APB1RSTR_USART2RST              ((uint32_t)0x00020000)
+#define  RCC_APB1RSTR_USART3RST              ((uint32_t)0x00040000)
+#define  RCC_APB1RSTR_UART4RST               ((uint32_t)0x00080000)
+#define  RCC_APB1RSTR_UART5RST               ((uint32_t)0x00100000)
+#define  RCC_APB1RSTR_I2C1RST                ((uint32_t)0x00200000)
+#define  RCC_APB1RSTR_I2C2RST                ((uint32_t)0x00400000)
+#define  RCC_APB1RSTR_I2C3RST                ((uint32_t)0x00800000)
+#define  RCC_APB1RSTR_I2C4RST                ((uint32_t)0x01000000)
+#define  RCC_APB1RSTR_CAN1RST                ((uint32_t)0x02000000)
+#define  RCC_APB1RSTR_CAN2RST                ((uint32_t)0x04000000)
+#define  RCC_APB1RSTR_CECRST                 ((uint32_t)0x08000000)
+#define  RCC_APB1RSTR_PWRRST                 ((uint32_t)0x10000000)
+#define  RCC_APB1RSTR_DACRST                 ((uint32_t)0x20000000)
+#define  RCC_APB1RSTR_UART7RST               ((uint32_t)0x40000000)
+#define  RCC_APB1RSTR_UART8RST               ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_APB2RSTR register  **************/
+#define  RCC_APB2RSTR_TIM1RST                ((uint32_t)0x00000001)
+#define  RCC_APB2RSTR_TIM8RST                ((uint32_t)0x00000002)
+#define  RCC_APB2RSTR_USART1RST              ((uint32_t)0x00000010)
+#define  RCC_APB2RSTR_USART6RST              ((uint32_t)0x00000020)
+#define  RCC_APB2RSTR_ADCRST                 ((uint32_t)0x00000100)
+#define  RCC_APB2RSTR_SDMMC1RST              ((uint32_t)0x00000800)
+#define  RCC_APB2RSTR_SPI1RST                ((uint32_t)0x00001000)
+#define  RCC_APB2RSTR_SPI4RST                ((uint32_t)0x00002000)
+#define  RCC_APB2RSTR_SYSCFGRST              ((uint32_t)0x00004000)
+#define  RCC_APB2RSTR_TIM9RST                ((uint32_t)0x00010000)
+#define  RCC_APB2RSTR_TIM10RST               ((uint32_t)0x00020000)
+#define  RCC_APB2RSTR_TIM11RST               ((uint32_t)0x00040000)
+#define  RCC_APB2RSTR_SPI5RST                ((uint32_t)0x00100000)
+#define  RCC_APB2RSTR_SPI6RST                ((uint32_t)0x00200000)
+#define  RCC_APB2RSTR_SAI1RST                ((uint32_t)0x00400000)
+#define  RCC_APB2RSTR_SAI2RST                ((uint32_t)0x00800000)
+#define  RCC_APB2RSTR_LTDCRST                ((uint32_t)0x04000000)
+
+/********************  Bit definition for RCC_AHB1ENR register  ***************/
+#define  RCC_AHB1ENR_GPIOAEN                 ((uint32_t)0x00000001)
+#define  RCC_AHB1ENR_GPIOBEN                 ((uint32_t)0x00000002)
+#define  RCC_AHB1ENR_GPIOCEN                 ((uint32_t)0x00000004)
+#define  RCC_AHB1ENR_GPIODEN                 ((uint32_t)0x00000008)
+#define  RCC_AHB1ENR_GPIOEEN                 ((uint32_t)0x00000010)
+#define  RCC_AHB1ENR_GPIOFEN                 ((uint32_t)0x00000020)
+#define  RCC_AHB1ENR_GPIOGEN                 ((uint32_t)0x00000040)
+#define  RCC_AHB1ENR_GPIOHEN                 ((uint32_t)0x00000080)
+#define  RCC_AHB1ENR_GPIOIEN                 ((uint32_t)0x00000100)
+#define  RCC_AHB1ENR_GPIOJEN                 ((uint32_t)0x00000200)
+#define  RCC_AHB1ENR_GPIOKEN                 ((uint32_t)0x00000400)
+#define  RCC_AHB1ENR_CRCEN                   ((uint32_t)0x00001000)
+#define  RCC_AHB1ENR_BKPSRAMEN               ((uint32_t)0x00040000)
+#define  RCC_AHB1ENR_DTCMRAMEN               ((uint32_t)0x00100000)
+#define  RCC_AHB1ENR_DMA1EN                  ((uint32_t)0x00200000)
+#define  RCC_AHB1ENR_DMA2EN                  ((uint32_t)0x00400000)
+#define  RCC_AHB1ENR_DMA2DEN                 ((uint32_t)0x00800000)
+#define  RCC_AHB1ENR_ETHMACEN                ((uint32_t)0x02000000)
+#define  RCC_AHB1ENR_ETHMACTXEN              ((uint32_t)0x04000000)
+#define  RCC_AHB1ENR_ETHMACRXEN              ((uint32_t)0x08000000)
+#define  RCC_AHB1ENR_ETHMACPTPEN             ((uint32_t)0x10000000)
+#define  RCC_AHB1ENR_OTGHSEN                 ((uint32_t)0x20000000)
+#define  RCC_AHB1ENR_OTGHSULPIEN             ((uint32_t)0x40000000)
+
+/********************  Bit definition for RCC_AHB2ENR register  ***************/
+#define  RCC_AHB2ENR_DCMIEN                  ((uint32_t)0x00000001)
+#define  RCC_AHB2ENR_RNGEN                   ((uint32_t)0x00000040)
+#define  RCC_AHB2ENR_OTGFSEN                 ((uint32_t)0x00000080)
+
+/********************  Bit definition for RCC_AHB3ENR register  ***************/
+
+#define  RCC_AHB3ENR_FMCEN                  ((uint32_t)0x00000001)
+#define  RCC_AHB3ENR_QSPIEN                 ((uint32_t)0x00000002)
+
+/********************  Bit definition for RCC_APB1ENR register  ***************/
+#define  RCC_APB1ENR_TIM2EN                  ((uint32_t)0x00000001)
+#define  RCC_APB1ENR_TIM3EN                  ((uint32_t)0x00000002)
+#define  RCC_APB1ENR_TIM4EN                  ((uint32_t)0x00000004)
+#define  RCC_APB1ENR_TIM5EN                  ((uint32_t)0x00000008)
+#define  RCC_APB1ENR_TIM6EN                  ((uint32_t)0x00000010)
+#define  RCC_APB1ENR_TIM7EN                  ((uint32_t)0x00000020)
+#define  RCC_APB1ENR_TIM12EN                 ((uint32_t)0x00000040)
+#define  RCC_APB1ENR_TIM13EN                 ((uint32_t)0x00000080)
+#define  RCC_APB1ENR_TIM14EN                 ((uint32_t)0x00000100)
+#define  RCC_APB1ENR_LPTIM1EN                ((uint32_t)0x00000200)
+#define  RCC_APB1ENR_WWDGEN                  ((uint32_t)0x00000800)
+#define  RCC_APB1ENR_SPI2EN                  ((uint32_t)0x00004000)
+#define  RCC_APB1ENR_SPI3EN                  ((uint32_t)0x00008000)
+#define  RCC_APB1ENR_SPDIFRXEN               ((uint32_t)0x00010000)
+#define  RCC_APB1ENR_USART2EN                ((uint32_t)0x00020000)
+#define  RCC_APB1ENR_USART3EN                ((uint32_t)0x00040000)
+#define  RCC_APB1ENR_UART4EN                 ((uint32_t)0x00080000)
+#define  RCC_APB1ENR_UART5EN                 ((uint32_t)0x00100000)
+#define  RCC_APB1ENR_I2C1EN                  ((uint32_t)0x00200000)
+#define  RCC_APB1ENR_I2C2EN                  ((uint32_t)0x00400000)
+#define  RCC_APB1ENR_I2C3EN                  ((uint32_t)0x00800000)
+#define  RCC_APB1ENR_I2C4EN                  ((uint32_t)0x01000000)
+#define  RCC_APB1ENR_CAN1EN                  ((uint32_t)0x02000000)
+#define  RCC_APB1ENR_CAN2EN                  ((uint32_t)0x04000000)
+#define  RCC_APB1ENR_CECEN                   ((uint32_t)0x08000000)
+#define  RCC_APB1ENR_PWREN                   ((uint32_t)0x10000000)
+#define  RCC_APB1ENR_DACEN                   ((uint32_t)0x20000000)
+#define  RCC_APB1ENR_UART7EN                 ((uint32_t)0x40000000)
+#define  RCC_APB1ENR_UART8EN                 ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_APB2ENR register  ***************/
+#define  RCC_APB2ENR_TIM1EN                  ((uint32_t)0x00000001)
+#define  RCC_APB2ENR_TIM8EN                  ((uint32_t)0x00000002)
+#define  RCC_APB2ENR_USART1EN                ((uint32_t)0x00000010)
+#define  RCC_APB2ENR_USART6EN                ((uint32_t)0x00000020)
+#define  RCC_APB2ENR_ADC1EN                  ((uint32_t)0x00000100)
+#define  RCC_APB2ENR_ADC2EN                  ((uint32_t)0x00000200)
+#define  RCC_APB2ENR_ADC3EN                  ((uint32_t)0x00000400)
+#define  RCC_APB2ENR_SDMMC1EN                ((uint32_t)0x00000800)
+#define  RCC_APB2ENR_SPI1EN                  ((uint32_t)0x00001000)
+#define  RCC_APB2ENR_SPI4EN                  ((uint32_t)0x00002000)
+#define  RCC_APB2ENR_SYSCFGEN                ((uint32_t)0x00004000)
+#define  RCC_APB2ENR_TIM9EN                  ((uint32_t)0x00010000)
+#define  RCC_APB2ENR_TIM10EN                 ((uint32_t)0x00020000)
+#define  RCC_APB2ENR_TIM11EN                 ((uint32_t)0x00040000)
+#define  RCC_APB2ENR_SPI5EN                  ((uint32_t)0x00100000)
+#define  RCC_APB2ENR_SPI6EN                  ((uint32_t)0x00200000)
+#define  RCC_APB2ENR_SAI1EN                  ((uint32_t)0x00400000)
+#define  RCC_APB2ENR_SAI2EN                  ((uint32_t)0x00800000)
+#define  RCC_APB2ENR_LTDCEN                  ((uint32_t)0x04000000)
+
+/********************  Bit definition for RCC_AHB1LPENR register  *************/
+#define  RCC_AHB1LPENR_GPIOALPEN             ((uint32_t)0x00000001)
+#define  RCC_AHB1LPENR_GPIOBLPEN             ((uint32_t)0x00000002)
+#define  RCC_AHB1LPENR_GPIOCLPEN             ((uint32_t)0x00000004)
+#define  RCC_AHB1LPENR_GPIODLPEN             ((uint32_t)0x00000008)
+#define  RCC_AHB1LPENR_GPIOELPEN             ((uint32_t)0x00000010)
+#define  RCC_AHB1LPENR_GPIOFLPEN             ((uint32_t)0x00000020)
+#define  RCC_AHB1LPENR_GPIOGLPEN             ((uint32_t)0x00000040)
+#define  RCC_AHB1LPENR_GPIOHLPEN             ((uint32_t)0x00000080)
+#define  RCC_AHB1LPENR_GPIOILPEN             ((uint32_t)0x00000100)
+#define  RCC_AHB1LPENR_GPIOJLPEN             ((uint32_t)0x00000200)
+#define  RCC_AHB1LPENR_GPIOKLPEN             ((uint32_t)0x00000400)
+
+#define  RCC_AHB1LPENR_CRCLPEN               ((uint32_t)0x00001000)
+#define  RCC_AHB1LPENR_AXILPEN               ((uint32_t)0x00002000)
+#define  RCC_AHB1LPENR_FLITFLPEN             ((uint32_t)0x00008000)
+#define  RCC_AHB1LPENR_SRAM1LPEN             ((uint32_t)0x00010000)
+#define  RCC_AHB1LPENR_SRAM2LPEN             ((uint32_t)0x00020000)
+#define  RCC_AHB1LPENR_BKPSRAMLPEN           ((uint32_t)0x00040000)
+#define  RCC_AHB1LPENR_DTCMLPEN              ((uint32_t)0x00100000)
+#define  RCC_AHB1LPENR_DMA1LPEN              ((uint32_t)0x00200000)
+#define  RCC_AHB1LPENR_DMA2LPEN              ((uint32_t)0x00400000)
+#define  RCC_AHB1LPENR_DMA2DLPEN             ((uint32_t)0x00800000)
+#define  RCC_AHB1LPENR_ETHMACLPEN            ((uint32_t)0x02000000)
+#define  RCC_AHB1LPENR_ETHMACTXLPEN          ((uint32_t)0x04000000)
+#define  RCC_AHB1LPENR_ETHMACRXLPEN          ((uint32_t)0x08000000)
+#define  RCC_AHB1LPENR_ETHMACPTPLPEN         ((uint32_t)0x10000000)
+#define  RCC_AHB1LPENR_OTGHSLPEN             ((uint32_t)0x20000000)
+#define  RCC_AHB1LPENR_OTGHSULPILPEN         ((uint32_t)0x40000000)
+
+/********************  Bit definition for RCC_AHB2LPENR register  *************/
+#define  RCC_AHB2LPENR_DCMILPEN              ((uint32_t)0x00000001)
+#define  RCC_AHB2LPENR_RNGLPEN               ((uint32_t)0x00000040)
+#define  RCC_AHB2LPENR_OTGFSLPEN             ((uint32_t)0x00000080)
+
+/********************  Bit definition for RCC_AHB3LPENR register  *************/
+#define  RCC_AHB3LPENR_FMCLPEN              ((uint32_t)0x00000001)
+#define  RCC_AHB3LPENR_QSPILPEN             ((uint32_t)0x00000002)
+/********************  Bit definition for RCC_APB1LPENR register  *************/
+#define  RCC_APB1LPENR_TIM2LPEN              ((uint32_t)0x00000001)
+#define  RCC_APB1LPENR_TIM3LPEN              ((uint32_t)0x00000002)
+#define  RCC_APB1LPENR_TIM4LPEN              ((uint32_t)0x00000004)
+#define  RCC_APB1LPENR_TIM5LPEN              ((uint32_t)0x00000008)
+#define  RCC_APB1LPENR_TIM6LPEN              ((uint32_t)0x00000010)
+#define  RCC_APB1LPENR_TIM7LPEN              ((uint32_t)0x00000020)
+#define  RCC_APB1LPENR_TIM12LPEN             ((uint32_t)0x00000040)
+#define  RCC_APB1LPENR_TIM13LPEN             ((uint32_t)0x00000080)
+#define  RCC_APB1LPENR_TIM14LPEN             ((uint32_t)0x00000100)
+#define  RCC_APB1LPENR_LPTIM1LPEN            ((uint32_t)0x00000200)
+#define  RCC_APB1LPENR_WWDGLPEN              ((uint32_t)0x00000800)
+#define  RCC_APB1LPENR_SPI2LPEN              ((uint32_t)0x00004000)
+#define  RCC_APB1LPENR_SPI3LPEN              ((uint32_t)0x00008000)
+#define  RCC_APB1LPENR_SPDIFRXLPEN           ((uint32_t)0x00010000)
+#define  RCC_APB1LPENR_USART2LPEN            ((uint32_t)0x00020000)
+#define  RCC_APB1LPENR_USART3LPEN            ((uint32_t)0x00040000)
+#define  RCC_APB1LPENR_UART4LPEN             ((uint32_t)0x00080000)
+#define  RCC_APB1LPENR_UART5LPEN             ((uint32_t)0x00100000)
+#define  RCC_APB1LPENR_I2C1LPEN              ((uint32_t)0x00200000)
+#define  RCC_APB1LPENR_I2C2LPEN              ((uint32_t)0x00400000)
+#define  RCC_APB1LPENR_I2C3LPEN              ((uint32_t)0x00800000)
+#define  RCC_APB1LPENR_I2C4LPEN              ((uint32_t)0x01000000)
+#define  RCC_APB1LPENR_CAN1LPEN              ((uint32_t)0x02000000)
+#define  RCC_APB1LPENR_CAN2LPEN              ((uint32_t)0x04000000)
+#define  RCC_APB1LPENR_CECLPEN               ((uint32_t)0x08000000)
+#define  RCC_APB1LPENR_PWRLPEN               ((uint32_t)0x10000000)
+#define  RCC_APB1LPENR_DACLPEN               ((uint32_t)0x20000000)
+#define  RCC_APB1LPENR_UART7LPEN             ((uint32_t)0x40000000)
+#define  RCC_APB1LPENR_UART8LPEN             ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_APB2LPENR register  *************/
+#define  RCC_APB2LPENR_TIM1LPEN              ((uint32_t)0x00000001)
+#define  RCC_APB2LPENR_TIM8LPEN              ((uint32_t)0x00000002)
+#define  RCC_APB2LPENR_USART1LPEN            ((uint32_t)0x00000010)
+#define  RCC_APB2LPENR_USART6LPEN            ((uint32_t)0x00000020)
+#define  RCC_APB2LPENR_ADC1LPEN              ((uint32_t)0x00000100)
+#define  RCC_APB2LPENR_ADC2LPEN              ((uint32_t)0x00000200)
+#define  RCC_APB2LPENR_ADC3LPEN              ((uint32_t)0x00000400)
+#define  RCC_APB2LPENR_SDMMC1LPEN            ((uint32_t)0x00000800)
+#define  RCC_APB2LPENR_SPI1LPEN              ((uint32_t)0x00001000)
+#define  RCC_APB2LPENR_SPI4LPEN              ((uint32_t)0x00002000)
+#define  RCC_APB2LPENR_SYSCFGLPEN            ((uint32_t)0x00004000)
+#define  RCC_APB2LPENR_TIM9LPEN              ((uint32_t)0x00010000)
+#define  RCC_APB2LPENR_TIM10LPEN             ((uint32_t)0x00020000)
+#define  RCC_APB2LPENR_TIM11LPEN             ((uint32_t)0x00040000)
+#define  RCC_APB2LPENR_SPI5LPEN              ((uint32_t)0x00100000)
+#define  RCC_APB2LPENR_SPI6LPEN              ((uint32_t)0x00200000)
+#define  RCC_APB2LPENR_SAI1LPEN              ((uint32_t)0x00400000)
+#define  RCC_APB2LPENR_SAI2LPEN              ((uint32_t)0x00800000)
+#define  RCC_APB2LPENR_LTDCLPEN              ((uint32_t)0x04000000)
+
+/********************  Bit definition for RCC_BDCR register  ******************/
+#define  RCC_BDCR_LSEON                      ((uint32_t)0x00000001)
+#define  RCC_BDCR_LSERDY                     ((uint32_t)0x00000002)
+#define  RCC_BDCR_LSEBYP                     ((uint32_t)0x00000004)
+#define  RCC_BDCR_LSEDRV                     ((uint32_t)0x00000018)
+#define  RCC_BDCR_LSEDRV_0                   ((uint32_t)0x00000008)
+#define  RCC_BDCR_LSEDRV_1                   ((uint32_t)0x00000010)
+#define  RCC_BDCR_RTCSEL                     ((uint32_t)0x00000300)
+#define  RCC_BDCR_RTCSEL_0                   ((uint32_t)0x00000100)
+#define  RCC_BDCR_RTCSEL_1                   ((uint32_t)0x00000200)
+#define  RCC_BDCR_RTCEN                      ((uint32_t)0x00008000)
+#define  RCC_BDCR_BDRST                      ((uint32_t)0x00010000)
+
+/********************  Bit definition for RCC_CSR register  *******************/
+#define  RCC_CSR_LSION                       ((uint32_t)0x00000001)
+#define  RCC_CSR_LSIRDY                      ((uint32_t)0x00000002)
+#define  RCC_CSR_RMVF                        ((uint32_t)0x01000000)
+#define  RCC_CSR_BORRSTF                     ((uint32_t)0x02000000)
+#define  RCC_CSR_PINRSTF                     ((uint32_t)0x04000000)
+#define  RCC_CSR_PORRSTF                     ((uint32_t)0x08000000)
+#define  RCC_CSR_SFTRSTF                     ((uint32_t)0x10000000)
+#define  RCC_CSR_IWDGRSTF                    ((uint32_t)0x20000000)
+#define  RCC_CSR_WWDGRSTF                    ((uint32_t)0x40000000)
+#define  RCC_CSR_LPWRRSTF                    ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_SSCGR register  *****************/
+#define  RCC_SSCGR_MODPER                    ((uint32_t)0x00001FFF)
+#define  RCC_SSCGR_INCSTEP                   ((uint32_t)0x0FFFE000)
+#define  RCC_SSCGR_SPREADSEL                 ((uint32_t)0x40000000)
+#define  RCC_SSCGR_SSCGEN                    ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_PLLI2SCFGR register  ************/
+#define  RCC_PLLI2SCFGR_PLLI2SN              ((uint32_t)0x00007FC0)
+#define  RCC_PLLI2SCFGR_PLLI2SN_0            ((uint32_t)0x00000040)
+#define  RCC_PLLI2SCFGR_PLLI2SN_1            ((uint32_t)0x00000080)
+#define  RCC_PLLI2SCFGR_PLLI2SN_2            ((uint32_t)0x00000100)
+#define  RCC_PLLI2SCFGR_PLLI2SN_3            ((uint32_t)0x00000200)
+#define  RCC_PLLI2SCFGR_PLLI2SN_4            ((uint32_t)0x00000400)
+#define  RCC_PLLI2SCFGR_PLLI2SN_5            ((uint32_t)0x00000800)
+#define  RCC_PLLI2SCFGR_PLLI2SN_6            ((uint32_t)0x00001000)
+#define  RCC_PLLI2SCFGR_PLLI2SN_7            ((uint32_t)0x00002000)
+#define  RCC_PLLI2SCFGR_PLLI2SN_8            ((uint32_t)0x00004000)
+
+#define  RCC_PLLI2SCFGR_PLLI2SP              ((uint32_t)0x00030000)
+#define  RCC_PLLI2SCFGR_PLLI2SP_0            ((uint32_t)0x00010000)
+#define  RCC_PLLI2SCFGR_PLLI2SP_1            ((uint32_t)0x00020000)
+
+#define  RCC_PLLI2SCFGR_PLLI2SQ              ((uint32_t)0x0F000000)
+#define  RCC_PLLI2SCFGR_PLLI2SQ_0            ((uint32_t)0x01000000)
+#define  RCC_PLLI2SCFGR_PLLI2SQ_1            ((uint32_t)0x02000000)
+#define  RCC_PLLI2SCFGR_PLLI2SQ_2            ((uint32_t)0x04000000)
+#define  RCC_PLLI2SCFGR_PLLI2SQ_3            ((uint32_t)0x08000000)
+
+#define  RCC_PLLI2SCFGR_PLLI2SR              ((uint32_t)0x70000000)
+#define  RCC_PLLI2SCFGR_PLLI2SR_0            ((uint32_t)0x10000000)
+#define  RCC_PLLI2SCFGR_PLLI2SR_1            ((uint32_t)0x20000000)
+#define  RCC_PLLI2SCFGR_PLLI2SR_2            ((uint32_t)0x40000000)
+
+/********************  Bit definition for RCC_PLLSAICFGR register  ************/
+#define  RCC_PLLSAICFGR_PLLSAIN              ((uint32_t)0x00007FC0)
+#define  RCC_PLLSAICFGR_PLLSAIN_0            ((uint32_t)0x00000040)
+#define  RCC_PLLSAICFGR_PLLSAIN_1            ((uint32_t)0x00000080)
+#define  RCC_PLLSAICFGR_PLLSAIN_2            ((uint32_t)0x00000100)
+#define  RCC_PLLSAICFGR_PLLSAIN_3            ((uint32_t)0x00000200)
+#define  RCC_PLLSAICFGR_PLLSAIN_4            ((uint32_t)0x00000400)
+#define  RCC_PLLSAICFGR_PLLSAIN_5            ((uint32_t)0x00000800)
+#define  RCC_PLLSAICFGR_PLLSAIN_6            ((uint32_t)0x00001000)
+#define  RCC_PLLSAICFGR_PLLSAIN_7            ((uint32_t)0x00002000)
+#define  RCC_PLLSAICFGR_PLLSAIN_8            ((uint32_t)0x00004000)
+
+#define  RCC_PLLSAICFGR_PLLSAIP              ((uint32_t)0x00030000)
+#define  RCC_PLLSAICFGR_PLLSAIP_0            ((uint32_t)0x00010000)
+#define  RCC_PLLSAICFGR_PLLSAIP_1            ((uint32_t)0x00020000)
+
+#define  RCC_PLLSAICFGR_PLLSAIQ              ((uint32_t)0x0F000000)
+#define  RCC_PLLSAICFGR_PLLSAIQ_0            ((uint32_t)0x01000000)
+#define  RCC_PLLSAICFGR_PLLSAIQ_1            ((uint32_t)0x02000000)
+#define  RCC_PLLSAICFGR_PLLSAIQ_2            ((uint32_t)0x04000000)
+#define  RCC_PLLSAICFGR_PLLSAIQ_3            ((uint32_t)0x08000000)
+
+#define  RCC_PLLSAICFGR_PLLSAIR              ((uint32_t)0x70000000)
+#define  RCC_PLLSAICFGR_PLLSAIR_0            ((uint32_t)0x10000000)
+#define  RCC_PLLSAICFGR_PLLSAIR_1            ((uint32_t)0x20000000)
+#define  RCC_PLLSAICFGR_PLLSAIR_2            ((uint32_t)0x40000000)
+
+/********************  Bit definition for RCC_DCKCFGR1 register  ***************/
+#define  RCC_DCKCFGR1_PLLI2SDIVQ              ((uint32_t)0x0000001F)
+#define  RCC_DCKCFGR1_PLLI2SDIVQ_0            ((uint32_t)0x00000001)
+#define  RCC_DCKCFGR1_PLLI2SDIVQ_1            ((uint32_t)0x00000002)
+#define  RCC_DCKCFGR1_PLLI2SDIVQ_2            ((uint32_t)0x00000004)
+#define  RCC_DCKCFGR1_PLLI2SDIVQ_3            ((uint32_t)0x00000008)
+#define  RCC_DCKCFGR1_PLLI2SDIVQ_4            ((uint32_t)0x00000010)
+
+#define  RCC_DCKCFGR1_PLLSAIDIVQ              ((uint32_t)0x00001F00)
+#define  RCC_DCKCFGR1_PLLSAIDIVQ_0            ((uint32_t)0x00000100)
+#define  RCC_DCKCFGR1_PLLSAIDIVQ_1            ((uint32_t)0x00000200)
+#define  RCC_DCKCFGR1_PLLSAIDIVQ_2            ((uint32_t)0x00000400)
+#define  RCC_DCKCFGR1_PLLSAIDIVQ_3            ((uint32_t)0x00000800)
+#define  RCC_DCKCFGR1_PLLSAIDIVQ_4            ((uint32_t)0x00001000)
+
+#define  RCC_DCKCFGR1_PLLSAIDIVR              ((uint32_t)0x00030000)
+#define  RCC_DCKCFGR1_PLLSAIDIVR_0            ((uint32_t)0x00010000)
+#define  RCC_DCKCFGR1_PLLSAIDIVR_1            ((uint32_t)0x00020000)
+
+#define  RCC_DCKCFGR1_SAI1SEL                 ((uint32_t)0x00300000)
+#define  RCC_DCKCFGR1_SAI1SEL_0               ((uint32_t)0x00100000)
+#define  RCC_DCKCFGR1_SAI1SEL_1               ((uint32_t)0x00200000)
+
+#define  RCC_DCKCFGR1_SAI2SEL                 ((uint32_t)0x00C00000)
+#define  RCC_DCKCFGR1_SAI2SEL_0               ((uint32_t)0x00400000)
+#define  RCC_DCKCFGR1_SAI2SEL_1               ((uint32_t)0x00800000)
+
+#define  RCC_DCKCFGR1_TIMPRE                  ((uint32_t)0x01000000)
+
+/********************  Bit definition for RCC_DCKCFGR2 register  ***************/
+#define  RCC_DCKCFGR2_USART1SEL              ((uint32_t)0x00000003)
+#define  RCC_DCKCFGR2_USART1SEL_0            ((uint32_t)0x00000001)
+#define  RCC_DCKCFGR2_USART1SEL_1            ((uint32_t)0x00000002)
+#define  RCC_DCKCFGR2_USART2SEL              ((uint32_t)0x0000000C)
+#define  RCC_DCKCFGR2_USART2SEL_0            ((uint32_t)0x00000004)
+#define  RCC_DCKCFGR2_USART2SEL_1            ((uint32_t)0x00000008)
+#define  RCC_DCKCFGR2_USART3SEL              ((uint32_t)0x00000030)
+#define  RCC_DCKCFGR2_USART3SEL_0            ((uint32_t)0x00000010)
+#define  RCC_DCKCFGR2_USART3SEL_1            ((uint32_t)0x00000020)
+#define  RCC_DCKCFGR2_UART4SEL               ((uint32_t)0x000000C0)
+#define  RCC_DCKCFGR2_UART4SEL_0             ((uint32_t)0x00000040)
+#define  RCC_DCKCFGR2_UART4SEL_1             ((uint32_t)0x00000080)
+#define  RCC_DCKCFGR2_UART5SEL               ((uint32_t)0x00000300)
+#define  RCC_DCKCFGR2_UART5SEL_0             ((uint32_t)0x00000100)
+#define  RCC_DCKCFGR2_UART5SEL_1             ((uint32_t)0x00000200)
+#define  RCC_DCKCFGR2_USART6SEL              ((uint32_t)0x00000C00)
+#define  RCC_DCKCFGR2_USART6SEL_0            ((uint32_t)0x00000400)
+#define  RCC_DCKCFGR2_USART6SEL_1            ((uint32_t)0x00000800)
+#define  RCC_DCKCFGR2_UART7SEL               ((uint32_t)0x00003000)
+#define  RCC_DCKCFGR2_UART7SEL_0             ((uint32_t)0x00001000)
+#define  RCC_DCKCFGR2_UART7SEL_1             ((uint32_t)0x00002000)
+#define  RCC_DCKCFGR2_UART8SEL               ((uint32_t)0x0000C000)
+#define  RCC_DCKCFGR2_UART8SEL_0             ((uint32_t)0x00004000)
+#define  RCC_DCKCFGR2_UART8SEL_1             ((uint32_t)0x00008000)
+#define  RCC_DCKCFGR2_I2C1SEL                ((uint32_t)0x00030000)
+#define  RCC_DCKCFGR2_I2C1SEL_0              ((uint32_t)0x00010000)
+#define  RCC_DCKCFGR2_I2C1SEL_1              ((uint32_t)0x00020000)
+#define  RCC_DCKCFGR2_I2C2SEL                ((uint32_t)0x000C0000)
+#define  RCC_DCKCFGR2_I2C2SEL_0              ((uint32_t)0x00040000)
+#define  RCC_DCKCFGR2_I2C2SEL_1              ((uint32_t)0x00080000)
+#define  RCC_DCKCFGR2_I2C3SEL                ((uint32_t)0x00300000)
+#define  RCC_DCKCFGR2_I2C3SEL_0              ((uint32_t)0x00100000)
+#define  RCC_DCKCFGR2_I2C3SEL_1              ((uint32_t)0x00200000)
+#define  RCC_DCKCFGR2_I2C4SEL                ((uint32_t)0x00C00000)
+#define  RCC_DCKCFGR2_I2C4SEL_0              ((uint32_t)0x00400000)
+#define  RCC_DCKCFGR2_I2C4SEL_1              ((uint32_t)0x00800000)
+#define  RCC_DCKCFGR2_LPTIM1SEL              ((uint32_t)0x03000000)
+#define  RCC_DCKCFGR2_LPTIM1SEL_0            ((uint32_t)0x01000000)
+#define  RCC_DCKCFGR2_LPTIM1SEL_1            ((uint32_t)0x02000000)
+#define  RCC_DCKCFGR2_CECSEL                 ((uint32_t)0x04000000)
+#define  RCC_DCKCFGR2_CK48MSEL               ((uint32_t)0x08000000)
+#define  RCC_DCKCFGR2_SDMMC1SEL              ((uint32_t)0x10000000)
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    RNG                                     */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bits definition for RNG_CR register  *******************/
+#define RNG_CR_RNGEN                         ((uint32_t)0x00000004)
+#define RNG_CR_IE                            ((uint32_t)0x00000008)
+
+/********************  Bits definition for RNG_SR register  *******************/
+#define RNG_SR_DRDY                          ((uint32_t)0x00000001)
+#define RNG_SR_CECS                          ((uint32_t)0x00000002)
+#define RNG_SR_SECS                          ((uint32_t)0x00000004)
+#define RNG_SR_CEIS                          ((uint32_t)0x00000020)
+#define RNG_SR_SEIS                          ((uint32_t)0x00000040)
+
+/******************************************************************************/
+/*                                                                            */
+/*                           Real-Time Clock (RTC)                            */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bits definition for RTC_TR register  *******************/
+#define RTC_TR_PM                            ((uint32_t)0x00400000)
+#define RTC_TR_HT                            ((uint32_t)0x00300000)
+#define RTC_TR_HT_0                          ((uint32_t)0x00100000)
+#define RTC_TR_HT_1                          ((uint32_t)0x00200000)
+#define RTC_TR_HU                            ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0                          ((uint32_t)0x00010000)
+#define RTC_TR_HU_1                          ((uint32_t)0x00020000)
+#define RTC_TR_HU_2                          ((uint32_t)0x00040000)
+#define RTC_TR_HU_3                          ((uint32_t)0x00080000)
+#define RTC_TR_MNT                           ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0                         ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1                         ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2                         ((uint32_t)0x00004000)
+#define RTC_TR_MNU                           ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0                         ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1                         ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2                         ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3                         ((uint32_t)0x00000800)
+#define RTC_TR_ST                            ((uint32_t)0x00000070)
+#define RTC_TR_ST_0                          ((uint32_t)0x00000010)
+#define RTC_TR_ST_1                          ((uint32_t)0x00000020)
+#define RTC_TR_ST_2                          ((uint32_t)0x00000040)
+#define RTC_TR_SU                            ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0                          ((uint32_t)0x00000001)
+#define RTC_TR_SU_1                          ((uint32_t)0x00000002)
+#define RTC_TR_SU_2                          ((uint32_t)0x00000004)
+#define RTC_TR_SU_3                          ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_DR register  *******************/
+#define RTC_DR_YT                            ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0                          ((uint32_t)0x00100000)
+#define RTC_DR_YT_1                          ((uint32_t)0x00200000)
+#define RTC_DR_YT_2                          ((uint32_t)0x00400000)
+#define RTC_DR_YT_3                          ((uint32_t)0x00800000)
+#define RTC_DR_YU                            ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0                          ((uint32_t)0x00010000)
+#define RTC_DR_YU_1                          ((uint32_t)0x00020000)
+#define RTC_DR_YU_2                          ((uint32_t)0x00040000)
+#define RTC_DR_YU_3                          ((uint32_t)0x00080000)
+#define RTC_DR_WDU                           ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0                         ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1                         ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2                         ((uint32_t)0x00008000)
+#define RTC_DR_MT                            ((uint32_t)0x00001000)
+#define RTC_DR_MU                            ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0                          ((uint32_t)0x00000100)
+#define RTC_DR_MU_1                          ((uint32_t)0x00000200)
+#define RTC_DR_MU_2                          ((uint32_t)0x00000400)
+#define RTC_DR_MU_3                          ((uint32_t)0x00000800)
+#define RTC_DR_DT                            ((uint32_t)0x00000030)
+#define RTC_DR_DT_0                          ((uint32_t)0x00000010)
+#define RTC_DR_DT_1                          ((uint32_t)0x00000020)
+#define RTC_DR_DU                            ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0                          ((uint32_t)0x00000001)
+#define RTC_DR_DU_1                          ((uint32_t)0x00000002)
+#define RTC_DR_DU_2                          ((uint32_t)0x00000004)
+#define RTC_DR_DU_3                          ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_CR register  *******************/
+#define RTC_CR_ITSE                          ((uint32_t)0x01000000) 
+#define RTC_CR_COE                           ((uint32_t)0x00800000)
+#define RTC_CR_OSEL                          ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0                        ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1                        ((uint32_t)0x00400000)
+#define RTC_CR_POL                           ((uint32_t)0x00100000)
+#define RTC_CR_COSEL                         ((uint32_t)0x00080000)
+#define RTC_CR_BCK                           ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H                         ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H                         ((uint32_t)0x00010000)
+#define RTC_CR_TSIE                          ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE                         ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE                        ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE                        ((uint32_t)0x00001000)
+#define RTC_CR_TSE                           ((uint32_t)0x00000800)
+#define RTC_CR_WUTE                          ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE                         ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE                         ((uint32_t)0x00000100)
+#define RTC_CR_FMT                           ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD                       ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON                       ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE                        ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL                       ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0                     ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1                     ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2                     ((uint32_t)0x00000004)
+
+/********************  Bits definition for RTC_ISR register  ******************/
+#define RTC_ISR_ITSF                         ((uint32_t)0x00020000)
+#define RTC_ISR_RECALPF                      ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP3F                       ((uint32_t)0x00008000)
+#define RTC_ISR_TAMP2F                       ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F                       ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF                        ((uint32_t)0x00001000)
+#define RTC_ISR_TSF                          ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF                         ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF                        ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF                        ((uint32_t)0x00000100)
+#define RTC_ISR_INIT                         ((uint32_t)0x00000080)
+#define RTC_ISR_INITF                        ((uint32_t)0x00000040)
+#define RTC_ISR_RSF                          ((uint32_t)0x00000020)
+#define RTC_ISR_INITS                        ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF                         ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF                        ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF                       ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF                       ((uint32_t)0x00000001)
+
+/********************  Bits definition for RTC_PRER register  *****************/
+#define RTC_PRER_PREDIV_A                    ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S                    ((uint32_t)0x00007FFF)
+
+/********************  Bits definition for RTC_WUTR register  *****************/
+#define RTC_WUTR_WUT                         ((uint32_t)0x0000FFFF)
+
+/********************  Bits definition for RTC_ALRMAR register  ***************/
+#define RTC_ALRMAR_MSK4                      ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL                     ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT                        ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0                      ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1                      ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU                        ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0                      ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1                      ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2                      ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3                      ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3                      ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM                        ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT                        ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0                      ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1                      ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU                        ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0                      ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1                      ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2                      ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3                      ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2                      ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT                       ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0                     ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1                     ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2                     ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU                       ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0                     ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1                     ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2                     ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3                     ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1                      ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST                        ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0                      ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1                      ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2                      ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU                        ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0                      ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1                      ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2                      ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3                      ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_ALRMBR register  ***************/
+#define RTC_ALRMBR_MSK4                      ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL                     ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT                        ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0                      ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1                      ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU                        ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0                      ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1                      ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2                      ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3                      ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3                      ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM                        ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT                        ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0                      ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1                      ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU                        ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0                      ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1                      ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2                      ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3                      ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2                      ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT                       ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0                     ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1                     ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2                     ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU                       ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0                     ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1                     ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2                     ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3                     ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1                      ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST                        ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0                      ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1                      ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2                      ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU                        ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0                      ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1                      ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2                      ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3                      ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_WPR register  ******************/
+#define RTC_WPR_KEY                          ((uint32_t)0x000000FF)
+
+/********************  Bits definition for RTC_SSR register  ******************/
+#define RTC_SSR_SS                           ((uint32_t)0x0000FFFF)
+
+/********************  Bits definition for RTC_SHIFTR register  ***************/
+#define RTC_SHIFTR_SUBFS                     ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S                     ((uint32_t)0x80000000)
+
+/********************  Bits definition for RTC_TSTR register  *****************/
+#define RTC_TSTR_PM                          ((uint32_t)0x00400000)
+#define RTC_TSTR_HT                          ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0                        ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1                        ((uint32_t)0x00200000)
+#define RTC_TSTR_HU                          ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0                        ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1                        ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2                        ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3                        ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT                         ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0                       ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1                       ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2                       ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU                         ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0                       ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1                       ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2                       ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3                       ((uint32_t)0x00000800)
+#define RTC_TSTR_ST                          ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0                        ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1                        ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2                        ((uint32_t)0x00000040)
+#define RTC_TSTR_SU                          ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0                        ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1                        ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2                        ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3                        ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_TSDR register  *****************/
+#define RTC_TSDR_WDU                         ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0                       ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1                       ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2                       ((uint32_t)0x00008000)
+#define RTC_TSDR_MT                          ((uint32_t)0x00001000)
+#define RTC_TSDR_MU                          ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0                        ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1                        ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2                        ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3                        ((uint32_t)0x00000800)
+#define RTC_TSDR_DT                          ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0                        ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1                        ((uint32_t)0x00000020)
+#define RTC_TSDR_DU                          ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0                        ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1                        ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2                        ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3                        ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_TSSSR register  ****************/
+#define RTC_TSSSR_SS                         ((uint32_t)0x0000FFFF)
+
+/********************  Bits definition for RTC_CAL register  *****************/
+#define RTC_CALR_CALP                        ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8                       ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16                      ((uint32_t)0x00002000)
+#define RTC_CALR_CALM                        ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0                      ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1                      ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2                      ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3                      ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4                      ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5                      ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6                      ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7                      ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8                      ((uint32_t)0x00000100)
+
+/********************  Bits definition for RTC_TAMPCR register  ****************/
+#define RTC_TAMPCR_TAMP3MF                    ((uint32_t)0x01000000)
+#define RTC_TAMPCR_TAMP3NOERASE               ((uint32_t)0x00800000)
+#define RTC_TAMPCR_TAMP3IE                    ((uint32_t)0x00400000)
+#define RTC_TAMPCR_TAMP2MF                    ((uint32_t)0x00200000)
+#define RTC_TAMPCR_TAMP2NOERASE               ((uint32_t)0x00100000)
+#define RTC_TAMPCR_TAMP2IE                    ((uint32_t)0x00080000)
+#define RTC_TAMPCR_TAMP1MF                    ((uint32_t)0x00040000)
+#define RTC_TAMPCR_TAMP1NOERASE               ((uint32_t)0x00020000)
+#define RTC_TAMPCR_TAMP1IE                    ((uint32_t)0x00010000)
+#define RTC_TAMPCR_TAMPPUDIS                  ((uint32_t)0x00008000)
+#define RTC_TAMPCR_TAMPPRCH                   ((uint32_t)0x00006000)
+#define RTC_TAMPCR_TAMPPRCH_0                 ((uint32_t)0x00002000)
+#define RTC_TAMPCR_TAMPPRCH_1                 ((uint32_t)0x00004000)
+#define RTC_TAMPCR_TAMPFLT                    ((uint32_t)0x00001800)
+#define RTC_TAMPCR_TAMPFLT_0                  ((uint32_t)0x00000800)
+#define RTC_TAMPCR_TAMPFLT_1                  ((uint32_t)0x00001000)
+#define RTC_TAMPCR_TAMPFREQ                   ((uint32_t)0x00000700)
+#define RTC_TAMPCR_TAMPFREQ_0                 ((uint32_t)0x00000100)
+#define RTC_TAMPCR_TAMPFREQ_1                 ((uint32_t)0x00000200)
+#define RTC_TAMPCR_TAMPFREQ_2                 ((uint32_t)0x00000400)
+#define RTC_TAMPCR_TAMPTS                     ((uint32_t)0x00000080)
+#define RTC_TAMPCR_TAMP3_TRG                  ((uint32_t)0x00000040)
+#define RTC_TAMPCR_TAMP3E                     ((uint32_t)0x00000020)
+#define RTC_TAMPCR_TAMP2_TRG                   ((uint32_t)0x00000010)
+#define RTC_TAMPCR_TAMP2E                     ((uint32_t)0x00000008)
+#define RTC_TAMPCR_TAMPIE                     ((uint32_t)0x00000004)
+#define RTC_TAMPCR_TAMP1_TRG                   ((uint32_t)0x00000002)
+#define RTC_TAMPCR_TAMP1E                     ((uint32_t)0x00000001)
+
+/********************  Bits definition for RTC_ALRMASSR register  *************/
+#define RTC_ALRMASSR_MASKSS                  ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0                ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1                ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2                ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3                ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS                      ((uint32_t)0x00007FFF)
+
+/********************  Bits definition for RTC_ALRMBSSR register  *************/
+#define RTC_ALRMBSSR_MASKSS                  ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0                ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1                ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2                ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3                ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS                      ((uint32_t)0x00007FFF)
+
+/********************  Bits definition for RTC_OR register  ****************/
+#define RTC_OR_TSINSEL                      ((uint32_t)0x00000006)
+#define RTC_OR_TSINSEL_0                    ((uint32_t)0x00000002)
+#define RTC_OR_TSINSEL_1                    ((uint32_t)0x00000004)
+#define RTC_OR_ALARMTYPE                    ((uint32_t)0x00000008)
+
+
+/********************  Bits definition for RTC_BKP0R register  ****************/
+#define RTC_BKP0R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP1R register  ****************/
+#define RTC_BKP1R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP2R register  ****************/
+#define RTC_BKP2R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP3R register  ****************/
+#define RTC_BKP3R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP4R register  ****************/
+#define RTC_BKP4R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP5R register  ****************/
+#define RTC_BKP5R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP6R register  ****************/
+#define RTC_BKP6R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP7R register  ****************/
+#define RTC_BKP7R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP8R register  ****************/
+#define RTC_BKP8R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP9R register  ****************/
+#define RTC_BKP9R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP10R register  ***************/
+#define RTC_BKP10R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP11R register  ***************/
+#define RTC_BKP11R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP12R register  ***************/
+#define RTC_BKP12R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP13R register  ***************/
+#define RTC_BKP13R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP14R register  ***************/
+#define RTC_BKP14R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP15R register  ***************/
+#define RTC_BKP15R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP16R register  ***************/
+#define RTC_BKP16R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP17R register  ***************/
+#define RTC_BKP17R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP18R register  ***************/
+#define RTC_BKP18R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP19R register  ***************/
+#define RTC_BKP19R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP20R register  ***************/
+#define RTC_BKP20R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP21R register  ***************/
+#define RTC_BKP21R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP22R register  ***************/
+#define RTC_BKP22R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP23R register  ***************/
+#define RTC_BKP23R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP24R register  ***************/
+#define RTC_BKP24R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP25R register  ***************/
+#define RTC_BKP25R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP26R register  ***************/
+#define RTC_BKP26R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP27R register  ***************/
+#define RTC_BKP27R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP28R register  ***************/
+#define RTC_BKP28R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP29R register  ***************/
+#define RTC_BKP29R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP30R register  ***************/
+#define RTC_BKP30R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP31R register  ***************/
+#define RTC_BKP31R                           ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER                       ((uint32_t)0x00000020)
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                          Serial Audio Interface                            */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for SAI_GCR register  *******************/
+#define  SAI_GCR_SYNCIN                  ((uint32_t)0x00000003)        /*!<SYNCIN[1:0] bits (Synchronization Inputs)   */
+#define  SAI_GCR_SYNCIN_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_GCR_SYNCIN_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  SAI_GCR_SYNCOUT                 ((uint32_t)0x00000030)        /*!<SYNCOUT[1:0] bits (Synchronization Outputs) */
+#define  SAI_GCR_SYNCOUT_0               ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  SAI_GCR_SYNCOUT_1               ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+/*******************  Bit definition for SAI_xCR1 register  *******************/
+#define  SAI_xCR1_MODE                    ((uint32_t)0x00000003)        /*!<MODE[1:0] bits (Audio Block Mode)           */
+#define  SAI_xCR1_MODE_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_xCR1_MODE_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  SAI_xCR1_PRTCFG                  ((uint32_t)0x0000000C)        /*!<PRTCFG[1:0] bits (Protocol Configuration)   */
+#define  SAI_xCR1_PRTCFG_0                ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  SAI_xCR1_PRTCFG_1                ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  SAI_xCR1_DS                      ((uint32_t)0x000000E0)        /*!<DS[1:0] bits (Data Size) */
+#define  SAI_xCR1_DS_0                    ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  SAI_xCR1_DS_1                    ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  SAI_xCR1_DS_2                    ((uint32_t)0x00000080)        /*!<Bit 2 */
+
+#define  SAI_xCR1_LSBFIRST                ((uint32_t)0x00000100)        /*!<LSB First Configuration  */
+#define  SAI_xCR1_CKSTR                   ((uint32_t)0x00000200)        /*!<ClocK STRobing edge      */
+
+#define  SAI_xCR1_SYNCEN                  ((uint32_t)0x00000C00)        /*!<SYNCEN[1:0](SYNChronization ENable) */
+#define  SAI_xCR1_SYNCEN_0                ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  SAI_xCR1_SYNCEN_1                ((uint32_t)0x00000800)        /*!<Bit 1 */
+
+#define  SAI_xCR1_MONO                    ((uint32_t)0x00001000)        /*!<Mono mode                  */
+#define  SAI_xCR1_OUTDRIV                 ((uint32_t)0x00002000)        /*!<Output Drive               */
+#define  SAI_xCR1_SAIEN                   ((uint32_t)0x00010000)        /*!<Audio Block enable         */
+#define  SAI_xCR1_DMAEN                   ((uint32_t)0x00020000)        /*!<DMA enable                 */
+#define  SAI_xCR1_NODIV                   ((uint32_t)0x00080000)        /*!<No Divider Configuration   */
+
+#define  SAI_xCR1_MCKDIV                  ((uint32_t)0x00F00000)        /*!<MCKDIV[3:0] (Master ClocK Divider)  */
+#define  SAI_xCR1_MCKDIV_0                ((uint32_t)0x00100000)        /*!<Bit 0  */
+#define  SAI_xCR1_MCKDIV_1                ((uint32_t)0x00200000)        /*!<Bit 1  */
+#define  SAI_xCR1_MCKDIV_2                ((uint32_t)0x00400000)        /*!<Bit 2  */
+#define  SAI_xCR1_MCKDIV_3                ((uint32_t)0x00800000)        /*!<Bit 3  */
+
+/*******************  Bit definition for SAI_xCR2 register  *******************/
+#define  SAI_xCR2_FTH                     ((uint32_t)0x00000007)        /*!<FTH[2:0](Fifo THreshold)  */
+#define  SAI_xCR2_FTH_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_xCR2_FTH_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  SAI_xCR2_FTH_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+
+#define  SAI_xCR2_FFLUSH                  ((uint32_t)0x00000008)        /*!<Fifo FLUSH                       */
+#define  SAI_xCR2_TRIS                    ((uint32_t)0x00000010)        /*!<TRIState Management on data line */
+#define  SAI_xCR2_MUTE                    ((uint32_t)0x00000020)        /*!<Mute mode                        */
+#define  SAI_xCR2_MUTEVAL                 ((uint32_t)0x00000040)        /*!<Muate value                      */
+
+#define  SAI_xCR2_MUTECNT                  ((uint32_t)0x00001F80)       /*!<MUTECNT[5:0] (MUTE counter) */
+#define  SAI_xCR2_MUTECNT_0               ((uint32_t)0x00000080)        /*!<Bit 0 */
+#define  SAI_xCR2_MUTECNT_1               ((uint32_t)0x00000100)        /*!<Bit 1 */
+#define  SAI_xCR2_MUTECNT_2               ((uint32_t)0x00000200)        /*!<Bit 2 */
+#define  SAI_xCR2_MUTECNT_3               ((uint32_t)0x00000400)        /*!<Bit 3 */
+#define  SAI_xCR2_MUTECNT_4               ((uint32_t)0x00000800)        /*!<Bit 4 */
+#define  SAI_xCR2_MUTECNT_5               ((uint32_t)0x00001000)        /*!<Bit 5 */
+
+#define  SAI_xCR2_CPL                     ((uint32_t)0x00002000)        /*!< Complement Bit             */
+
+#define  SAI_xCR2_COMP                    ((uint32_t)0x0000C000)        /*!<COMP[1:0] (Companding mode) */
+#define  SAI_xCR2_COMP_0                  ((uint32_t)0x00004000)        /*!<Bit 0 */
+#define  SAI_xCR2_COMP_1                  ((uint32_t)0x00008000)        /*!<Bit 1 */
+
+/******************  Bit definition for SAI_xFRCR register  *******************/
+#define  SAI_xFRCR_FRL                    ((uint32_t)0x000000FF)        /*!<FRL[1:0](Frame length)  */
+#define  SAI_xFRCR_FRL_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_xFRCR_FRL_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  SAI_xFRCR_FRL_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  SAI_xFRCR_FRL_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  SAI_xFRCR_FRL_4                  ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  SAI_xFRCR_FRL_5                  ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  SAI_xFRCR_FRL_6                  ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  SAI_xFRCR_FRL_7                  ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  SAI_xFRCR_FSALL                  ((uint32_t)0x00007F00)        /*!<FRL[1:0] (Frame synchronization active level length)  */
+#define  SAI_xFRCR_FSALL_0                ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  SAI_xFRCR_FSALL_1                ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  SAI_xFRCR_FSALL_2                ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  SAI_xFRCR_FSALL_3                ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  SAI_xFRCR_FSALL_4                ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  SAI_xFRCR_FSALL_5                ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  SAI_xFRCR_FSALL_6                ((uint32_t)0x00004000)        /*!<Bit 6 */
+
+#define  SAI_xFRCR_FSDEF                  ((uint32_t)0x00010000)        /*!< Frame Synchronization Definition */
+#define  SAI_xFRCR_FSPO                   ((uint32_t)0x00020000)        /*!<Frame Synchronization POLarity    */
+#define  SAI_xFRCR_FSOFF                  ((uint32_t)0x00040000)        /*!<Frame Synchronization OFFset      */
+
+/******************  Bit definition for SAI_xSLOTR register  *******************/
+#define  SAI_xSLOTR_FBOFF                 ((uint32_t)0x0000001F)        /*!<FRL[4:0](First Bit Offset)  */
+#define  SAI_xSLOTR_FBOFF_0               ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_xSLOTR_FBOFF_1               ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  SAI_xSLOTR_FBOFF_2               ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  SAI_xSLOTR_FBOFF_3               ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  SAI_xSLOTR_FBOFF_4               ((uint32_t)0x00000010)        /*!<Bit 4 */
+                                     
+#define  SAI_xSLOTR_SLOTSZ                ((uint32_t)0x000000C0)        /*!<SLOTSZ[1:0] (Slot size)  */
+#define  SAI_xSLOTR_SLOTSZ_0              ((uint32_t)0x00000040)        /*!<Bit 0 */
+#define  SAI_xSLOTR_SLOTSZ_1              ((uint32_t)0x00000080)        /*!<Bit 1 */
+
+#define  SAI_xSLOTR_NBSLOT                ((uint32_t)0x00000F00)        /*!<NBSLOT[3:0] (Number of Slot in audio Frame)  */
+#define  SAI_xSLOTR_NBSLOT_0              ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  SAI_xSLOTR_NBSLOT_1              ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  SAI_xSLOTR_NBSLOT_2              ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  SAI_xSLOTR_NBSLOT_3              ((uint32_t)0x00000800)        /*!<Bit 3 */
+
+#define  SAI_xSLOTR_SLOTEN                ((uint32_t)0xFFFF0000)        /*!<SLOTEN[15:0] (Slot Enable)  */
+
+/*******************  Bit definition for SAI_xIMR register  *******************/
+#define  SAI_xIMR_OVRUDRIE                ((uint32_t)0x00000001)        /*!<Overrun underrun interrupt enable                              */
+#define  SAI_xIMR_MUTEDETIE               ((uint32_t)0x00000002)        /*!<Mute detection interrupt enable                                */
+#define  SAI_xIMR_WCKCFGIE                ((uint32_t)0x00000004)        /*!<Wrong Clock Configuration interrupt enable                     */
+#define  SAI_xIMR_FREQIE                  ((uint32_t)0x00000008)        /*!<FIFO request interrupt enable                                  */
+#define  SAI_xIMR_CNRDYIE                 ((uint32_t)0x00000010)        /*!<Codec not ready interrupt enable                               */
+#define  SAI_xIMR_AFSDETIE                ((uint32_t)0x00000020)        /*!<Anticipated frame synchronization detection interrupt enable   */
+#define  SAI_xIMR_LFSDETIE                ((uint32_t)0x00000040)        /*!<Late frame synchronization detection interrupt enable          */
+
+/********************  Bit definition for SAI_xSR register  *******************/
+#define  SAI_xSR_OVRUDR                   ((uint32_t)0x00000001)         /*!<Overrun underrun                               */
+#define  SAI_xSR_MUTEDET                  ((uint32_t)0x00000002)         /*!<Mute detection                                 */
+#define  SAI_xSR_WCKCFG                   ((uint32_t)0x00000004)         /*!<Wrong Clock Configuration                      */
+#define  SAI_xSR_FREQ                     ((uint32_t)0x00000008)         /*!<FIFO request                                   */
+#define  SAI_xSR_CNRDY                    ((uint32_t)0x00000010)         /*!<Codec not ready                                */
+#define  SAI_xSR_AFSDET                   ((uint32_t)0x00000020)         /*!<Anticipated frame synchronization detection    */
+#define  SAI_xSR_LFSDET                   ((uint32_t)0x00000040)         /*!<Late frame synchronization detection           */
+
+#define  SAI_xSR_FLVL                     ((uint32_t)0x00070000)         /*!<FLVL[2:0] (FIFO Level Threshold)               */
+#define  SAI_xSR_FLVL_0                   ((uint32_t)0x00010000)         /*!<Bit 0 */
+#define  SAI_xSR_FLVL_1                   ((uint32_t)0x00020000)         /*!<Bit 1 */
+#define  SAI_xSR_FLVL_2                   ((uint32_t)0x00040000)         /*!<Bit 2 */
+
+/******************  Bit definition for SAI_xCLRFR register  ******************/
+#define  SAI_xCLRFR_COVRUDR               ((uint32_t)0x00000001)        /*!<Clear Overrun underrun                               */
+#define  SAI_xCLRFR_CMUTEDET              ((uint32_t)0x00000002)        /*!<Clear Mute detection                                 */
+#define  SAI_xCLRFR_CWCKCFG               ((uint32_t)0x00000004)        /*!<Clear Wrong Clock Configuration                      */
+#define  SAI_xCLRFR_CFREQ                 ((uint32_t)0x00000008)        /*!<Clear FIFO request                                   */
+#define  SAI_xCLRFR_CCNRDY                ((uint32_t)0x00000010)        /*!<Clear Codec not ready                                */
+#define  SAI_xCLRFR_CAFSDET               ((uint32_t)0x00000020)        /*!<Clear Anticipated frame synchronization detection    */
+#define  SAI_xCLRFR_CLFSDET               ((uint32_t)0x00000040)        /*!<Clear Late frame synchronization detection           */
+
+/******************  Bit definition for SAI_xDR register  *********************/
+#define  SAI_xDR_DATA                     ((uint32_t)0xFFFFFFFF)        
+
+/******************************************************************************/
+/*                                                                            */
+/*                              SPDIF-RX Interface                            */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for SPDIF_CR register  *******************/
+#define  SPDIFRX_CR_SPDIFEN                  ((uint32_t)0x00000003)        /*!<Peripheral Block Enable                      */
+#define  SPDIFRX_CR_RXDMAEN                  ((uint32_t)0x00000004)        /*!<Receiver DMA Enable for data flow            */
+#define  SPDIFRX_CR_RXSTEO                   ((uint32_t)0x00000008)        /*!<Stereo Mode                                  */
+#define  SPDIFRX_CR_DRFMT                    ((uint32_t)0x00000030)        /*!<RX Data format                               */
+#define  SPDIFRX_CR_PMSK                     ((uint32_t)0x00000040)        /*!<Mask Parity error bit                        */
+#define  SPDIFRX_CR_VMSK                     ((uint32_t)0x00000080)        /*!<Mask of Validity bit                         */
+#define  SPDIFRX_CR_CUMSK                    ((uint32_t)0x00000100)        /*!<Mask of channel status and user bits         */
+#define  SPDIFRX_CR_PTMSK                    ((uint32_t)0x00000200)        /*!<Mask of Preamble Type bits                   */
+#define  SPDIFRX_CR_CBDMAEN                  ((uint32_t)0x00000400)        /*!<Control Buffer DMA ENable for control flow   */
+#define  SPDIFRX_CR_CHSEL                    ((uint32_t)0x00000800)        /*!<Channel Selection                            */
+#define  SPDIFRX_CR_NBTR                     ((uint32_t)0x00003000)        /*!<Maximum allowed re-tries during synchronization phase */
+#define  SPDIFRX_CR_WFA                      ((uint32_t)0x00004000)        /*!<Wait For Activity     */
+#define  SPDIFRX_CR_INSEL                    ((uint32_t)0x00070000)        /*!<SPDIF input selection */
+
+/*******************  Bit definition for SPDIFRX_IMR register  *******************/
+#define  SPDIFRX_IMR_RXNEIE                   ((uint32_t)0x00000001)        /*!<RXNE interrupt enable                              */
+#define  SPDIFRX_IMR_CSRNEIE                  ((uint32_t)0x00000002)        /*!<Control Buffer Ready Interrupt Enable              */
+#define  SPDIFRX_IMR_PERRIE                   ((uint32_t)0x00000004)        /*!<Parity error interrupt enable                      */
+#define  SPDIFRX_IMR_OVRIE                    ((uint32_t)0x00000008)        /*!<Overrun error Interrupt Enable                     */
+#define  SPDIFRX_IMR_SBLKIE                   ((uint32_t)0x00000010)        /*!<Synchronization Block Detected Interrupt Enable    */
+#define  SPDIFRX_IMR_SYNCDIE                  ((uint32_t)0x00000020)        /*!<Synchronization Done                               */
+#define  SPDIFRX_IMR_IFEIE                    ((uint32_t)0x00000040)        /*!<Serial Interface Error Interrupt Enable            */
+
+/*******************  Bit definition for SPDIFRX_SR register  *******************/
+#define  SPDIFRX_SR_RXNE                   ((uint32_t)0x00000001)       /*!<Read data register not empty                          */
+#define  SPDIFRX_SR_CSRNE                  ((uint32_t)0x00000002)       /*!<The Control Buffer register is not empty              */
+#define  SPDIFRX_SR_PERR                   ((uint32_t)0x00000004)       /*!<Parity error                                          */
+#define  SPDIFRX_SR_OVR                    ((uint32_t)0x00000008)       /*!<Overrun error                                         */
+#define  SPDIFRX_SR_SBD                    ((uint32_t)0x00000010)       /*!<Synchronization Block Detected                        */
+#define  SPDIFRX_SR_SYNCD                  ((uint32_t)0x00000020)       /*!<Synchronization Done                                  */
+#define  SPDIFRX_SR_FERR                   ((uint32_t)0x00000040)       /*!<Framing error                                         */
+#define  SPDIFRX_SR_SERR                   ((uint32_t)0x00000080)       /*!<Synchronization error                                 */
+#define  SPDIFRX_SR_TERR                   ((uint32_t)0x00000100)       /*!<Time-out error                                        */
+#define  SPDIFRX_SR_WIDTH5                 ((uint32_t)0x7FFF0000)       /*!<Duration of 5 symbols counted with spdif_clk          */
+
+/*******************  Bit definition for SPDIFRX_IFCR register  *******************/
+#define  SPDIFRX_IFCR_PERRCF               ((uint32_t)0x00000004)       /*!<Clears the Parity error flag                         */
+#define  SPDIFRX_IFCR_OVRCF                ((uint32_t)0x00000008)       /*!<Clears the Overrun error flag                        */
+#define  SPDIFRX_IFCR_SBDCF                ((uint32_t)0x00000010)       /*!<Clears the Synchronization Block Detected flag       */
+#define  SPDIFRX_IFCR_SYNCDCF              ((uint32_t)0x00000020)       /*!<Clears the Synchronization Done flag                 */
+
+/*******************  Bit definition for SPDIFRX_DR register  (DRFMT = 0b00 case) *******************/
+#define  SPDIFRX_DR0_DR                    ((uint32_t)0x00FFFFFF)        /*!<Data value            */
+#define  SPDIFRX_DR0_PE                    ((uint32_t)0x01000000)        /*!<Parity Error bit      */
+#define  SPDIFRX_DR0_V                     ((uint32_t)0x02000000)        /*!<Validity bit          */
+#define  SPDIFRX_DR0_U                     ((uint32_t)0x04000000)        /*!<User bit              */
+#define  SPDIFRX_DR0_C                     ((uint32_t)0x08000000)        /*!<Channel Status bit    */
+#define  SPDIFRX_DR0_PT                    ((uint32_t)0x30000000)        /*!<Preamble Type         */
+
+/*******************  Bit definition for SPDIFRX_DR register  (DRFMT = 0b01 case) *******************/
+#define  SPDIFRX_DR1_DR                    ((uint32_t)0xFFFFFF00)        /*!<Data value            */
+#define  SPDIFRX_DR1_PT                    ((uint32_t)0x00000030)        /*!<Preamble Type         */
+#define  SPDIFRX_DR1_C                     ((uint32_t)0x00000008)        /*!<Channel Status bit    */
+#define  SPDIFRX_DR1_U                     ((uint32_t)0x00000004)        /*!<User bit              */
+#define  SPDIFRX_DR1_V                     ((uint32_t)0x00000002)        /*!<Validity bit          */
+#define  SPDIFRX_DR1_PE                    ((uint32_t)0x00000001)        /*!<Parity Error bit      */
+
+/*******************  Bit definition for SPDIFRX_DR register  (DRFMT = 0b10 case) *******************/
+#define  SPDIFRX_DR1_DRNL1                 ((uint32_t)0xFFFF0000)        /*!<Data value Channel B      */
+#define  SPDIFRX_DR1_DRNL2                 ((uint32_t)0x0000FFFF)        /*!<Data value Channel A      */
+
+/*******************  Bit definition for SPDIFRX_CSR register   *******************/
+#define  SPDIFRX_CSR_USR                     ((uint32_t)0x0000FFFF)        /*!<User data information           */
+#define  SPDIFRX_CSR_CS                      ((uint32_t)0x00FF0000)        /*!<Channel A status information    */
+#define  SPDIFRX_CSR_SOB                     ((uint32_t)0x01000000)        /*!<Start Of Block                  */
+
+/*******************  Bit definition for SPDIFRX_DIR register    *******************/
+#define  SPDIFRX_DIR_THI                 ((uint32_t)0x000013FF)        /*!<Threshold LOW      */
+#define  SPDIFRX_DIR_TLO                 ((uint32_t)0x1FFF0000)        /*!<Threshold HIGH     */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                          SD host Interface                                 */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for SDMMC_POWER register  ******************/
+#define  SDMMC_POWER_PWRCTRL                  ((uint32_t)0x03)               /*!<PWRCTRL[1:0] bits (Power supply control bits) */
+#define  SDMMC_POWER_PWRCTRL_0                ((uint32_t)0x01)               /*!<Bit 0 */
+#define  SDMMC_POWER_PWRCTRL_1                ((uint32_t)0x02)               /*!<Bit 1 */
+
+/******************  Bit definition for SDMMC_CLKCR register  ******************/
+#define  SDMMC_CLKCR_CLKDIV                   ((uint32_t)0x00FF)            /*!<Clock divide factor             */
+#define  SDMMC_CLKCR_CLKEN                    ((uint32_t)0x0100)            /*!<Clock enable bit                */
+#define  SDMMC_CLKCR_PWRSAV                   ((uint32_t)0x0200)            /*!<Power saving configuration bit  */
+#define  SDMMC_CLKCR_BYPASS                   ((uint32_t)0x0400)            /*!<Clock divider bypass enable bit */
+         
+#define  SDMMC_CLKCR_WIDBUS                   ((uint32_t)0x1800)            /*!<WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define  SDMMC_CLKCR_WIDBUS_0                 ((uint32_t)0x0800)            /*!<Bit 0 */
+#define  SDMMC_CLKCR_WIDBUS_1                 ((uint32_t)0x1000)            /*!<Bit 1 */
+         
+#define  SDMMC_CLKCR_NEGEDGE                  ((uint32_t)0x2000)            /*!<SDMMC_CK dephasing selection bit */
+#define  SDMMC_CLKCR_HWFC_EN                  ((uint32_t)0x4000)            /*!<HW Flow Control enable          */
+
+/*******************  Bit definition for SDMMC_ARG register  *******************/
+#define  SDMMC_ARG_CMDARG                     ((uint32_t)0xFFFFFFFF)            /*!<Command argument */
+
+/*******************  Bit definition for SDMMC_CMD register  *******************/
+#define  SDMMC_CMD_CMDINDEX                   ((uint32_t)0x003F)            /*!<Command Index                               */
+         
+#define  SDMMC_CMD_WAITRESP                   ((uint32_t)0x00C0)            /*!<WAITRESP[1:0] bits (Wait for response bits) */
+#define  SDMMC_CMD_WAITRESP_0                 ((uint32_t)0x0040)            /*!< Bit 0 */
+#define  SDMMC_CMD_WAITRESP_1                 ((uint32_t)0x0080)            /*!< Bit 1 */
+         
+#define  SDMMC_CMD_WAITINT                    ((uint32_t)0x0100)            /*!<CPSM Waits for Interrupt Request                               */
+#define  SDMMC_CMD_WAITPEND                   ((uint32_t)0x0200)            /*!<CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define  SDMMC_CMD_CPSMEN                     ((uint32_t)0x0400)            /*!<Command path state machine (CPSM) Enable bit                   */
+#define  SDMMC_CMD_SDIOSUSPEND                ((uint32_t)0x0800)            /*!<SD I/O suspend command                                         */
+
+/*****************  Bit definition for SDMMC_RESPCMD register  *****************/
+#define  SDMMC_RESPCMD_RESPCMD                ((uint32_t)0x3F)               /*!<Response command index */
+
+/******************  Bit definition for SDMMC_RESP0 register  ******************/
+#define  SDMMC_RESP0_CARDSTATUS0              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDMMC_RESP1 register  ******************/
+#define  SDMMC_RESP1_CARDSTATUS1              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDMMC_RESP2 register  ******************/
+#define  SDMMC_RESP2_CARDSTATUS2              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDMMC_RESP3 register  ******************/
+#define  SDMMC_RESP3_CARDSTATUS3              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDMMC_RESP4 register  ******************/
+#define  SDMMC_RESP4_CARDSTATUS4              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDMMC_DTIMER register  *****************/
+#define  SDMMC_DTIMER_DATATIME                ((uint32_t)0xFFFFFFFF)        /*!<Data timeout period. */
+
+/******************  Bit definition for SDMMC_DLEN register  *******************/
+#define  SDMMC_DLEN_DATALENGTH                ((uint32_t)0x01FFFFFF)        /*!<Data length value    */
+
+/******************  Bit definition for SDMMC_DCTRL register  ******************/
+#define  SDMMC_DCTRL_DTEN                     ((uint32_t)0x0001)            /*!<Data transfer enabled bit         */
+#define  SDMMC_DCTRL_DTDIR                    ((uint32_t)0x0002)            /*!<Data transfer direction selection */
+#define  SDMMC_DCTRL_DTMODE                   ((uint32_t)0x0004)            /*!<Data transfer mode selection      */
+#define  SDMMC_DCTRL_DMAEN                    ((uint32_t)0x0008)            /*!<DMA enabled bit                   */
+
+#define  SDMMC_DCTRL_DBLOCKSIZE               ((uint32_t)0x00F0)            /*!<DBLOCKSIZE[3:0] bits (Data block size) */
+#define  SDMMC_DCTRL_DBLOCKSIZE_0             ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  SDMMC_DCTRL_DBLOCKSIZE_1             ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  SDMMC_DCTRL_DBLOCKSIZE_2             ((uint32_t)0x0040)            /*!<Bit 2 */
+#define  SDMMC_DCTRL_DBLOCKSIZE_3             ((uint32_t)0x0080)            /*!<Bit 3 */
+
+#define  SDMMC_DCTRL_RWSTART                  ((uint32_t)0x0100)            /*!<Read wait start         */
+#define  SDMMC_DCTRL_RWSTOP                   ((uint32_t)0x0200)            /*!<Read wait stop          */
+#define  SDMMC_DCTRL_RWMOD                    ((uint32_t)0x0400)            /*!<Read wait mode          */
+#define  SDMMC_DCTRL_SDIOEN                   ((uint32_t)0x0800)            /*!<SD I/O enable functions */
+
+/******************  Bit definition for SDMMC_DCOUNT register  *****************/
+#define  SDMMC_DCOUNT_DATACOUNT               ((uint32_t)0x01FFFFFF)        /*!<Data count value */
+
+/******************  Bit definition for SDMMC_STA register  ********************/
+#define  SDMMC_STA_CCRCFAIL                   ((uint32_t)0x00000001)        /*!<Command response received (CRC check failed)  */
+#define  SDMMC_STA_DCRCFAIL                   ((uint32_t)0x00000002)        /*!<Data block sent/received (CRC check failed)   */
+#define  SDMMC_STA_CTIMEOUT                   ((uint32_t)0x00000004)        /*!<Command response timeout                      */
+#define  SDMMC_STA_DTIMEOUT                   ((uint32_t)0x00000008)        /*!<Data timeout                                  */
+#define  SDMMC_STA_TXUNDERR                   ((uint32_t)0x00000010)        /*!<Transmit FIFO underrun error                  */
+#define  SDMMC_STA_RXOVERR                    ((uint32_t)0x00000020)        /*!<Received FIFO overrun error                   */
+#define  SDMMC_STA_CMDREND                    ((uint32_t)0x00000040)        /*!<Command response received (CRC check passed)  */
+#define  SDMMC_STA_CMDSENT                    ((uint32_t)0x00000080)        /*!<Command sent (no response required)           */
+#define  SDMMC_STA_DATAEND                    ((uint32_t)0x00000100)        /*!<Data end (data counter, SDIDCOUNT, is zero)   */
+#define  SDMMC_STA_DBCKEND                    ((uint32_t)0x00000400)        /*!<Data block sent/received (CRC check passed)   */
+#define  SDMMC_STA_CMDACT                     ((uint32_t)0x00000800)        /*!<Command transfer in progress                  */
+#define  SDMMC_STA_TXACT                      ((uint32_t)0x00001000)        /*!<Data transmit in progress                     */
+#define  SDMMC_STA_RXACT                      ((uint32_t)0x00002000)        /*!<Data receive in progress                      */
+#define  SDMMC_STA_TXFIFOHE                   ((uint32_t)0x00004000)        /*!<Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define  SDMMC_STA_RXFIFOHF                   ((uint32_t)0x00008000)        /*!<Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define  SDMMC_STA_TXFIFOF                    ((uint32_t)0x00010000)        /*!<Transmit FIFO full                            */
+#define  SDMMC_STA_RXFIFOF                    ((uint32_t)0x00020000)        /*!<Receive FIFO full                             */
+#define  SDMMC_STA_TXFIFOE                    ((uint32_t)0x00040000)        /*!<Transmit FIFO empty                           */
+#define  SDMMC_STA_RXFIFOE                    ((uint32_t)0x00080000)        /*!<Receive FIFO empty                            */
+#define  SDMMC_STA_TXDAVL                     ((uint32_t)0x00100000)        /*!<Data available in transmit FIFO               */
+#define  SDMMC_STA_RXDAVL                     ((uint32_t)0x00200000)        /*!<Data available in receive FIFO                */
+#define  SDMMC_STA_SDIOIT                     ((uint32_t)0x00400000)        /*!<SDMMC interrupt received                       */
+
+/*******************  Bit definition for SDMMC_ICR register  *******************/
+#define  SDMMC_ICR_CCRCFAILC                  ((uint32_t)0x00000001)        /*!<CCRCFAIL flag clear bit */
+#define  SDMMC_ICR_DCRCFAILC                  ((uint32_t)0x00000002)        /*!<DCRCFAIL flag clear bit */
+#define  SDMMC_ICR_CTIMEOUTC                  ((uint32_t)0x00000004)        /*!<CTIMEOUT flag clear bit */
+#define  SDMMC_ICR_DTIMEOUTC                  ((uint32_t)0x00000008)        /*!<DTIMEOUT flag clear bit */
+#define  SDMMC_ICR_TXUNDERRC                  ((uint32_t)0x00000010)        /*!<TXUNDERR flag clear bit */
+#define  SDMMC_ICR_RXOVERRC                   ((uint32_t)0x00000020)        /*!<RXOVERR flag clear bit  */
+#define  SDMMC_ICR_CMDRENDC                   ((uint32_t)0x00000040)        /*!<CMDREND flag clear bit  */
+#define  SDMMC_ICR_CMDSENTC                   ((uint32_t)0x00000080)        /*!<CMDSENT flag clear bit  */
+#define  SDMMC_ICR_DATAENDC                   ((uint32_t)0x00000100)        /*!<DATAEND flag clear bit  */
+#define  SDMMC_ICR_DBCKENDC                   ((uint32_t)0x00000400)        /*!<DBCKEND flag clear bit  */
+#define  SDMMC_ICR_SDIOITC                    ((uint32_t)0x00400000)        /*!<SDMMCIT flag clear bit   */
+
+/******************  Bit definition for SDMMC_MASK register  *******************/
+#define  SDMMC_MASK_CCRCFAILIE                ((uint32_t)0x00000001)        /*!<Command CRC Fail Interrupt Enable          */
+#define  SDMMC_MASK_DCRCFAILIE                ((uint32_t)0x00000002)        /*!<Data CRC Fail Interrupt Enable             */
+#define  SDMMC_MASK_CTIMEOUTIE                ((uint32_t)0x00000004)        /*!<Command TimeOut Interrupt Enable           */
+#define  SDMMC_MASK_DTIMEOUTIE                ((uint32_t)0x00000008)        /*!<Data TimeOut Interrupt Enable              */
+#define  SDMMC_MASK_TXUNDERRIE                ((uint32_t)0x00000010)        /*!<Tx FIFO UnderRun Error Interrupt Enable    */
+#define  SDMMC_MASK_RXOVERRIE                 ((uint32_t)0x00000020)        /*!<Rx FIFO OverRun Error Interrupt Enable     */
+#define  SDMMC_MASK_CMDRENDIE                 ((uint32_t)0x00000040)        /*!<Command Response Received Interrupt Enable */
+#define  SDMMC_MASK_CMDSENTIE                 ((uint32_t)0x00000080)        /*!<Command Sent Interrupt Enable              */
+#define  SDMMC_MASK_DATAENDIE                 ((uint32_t)0x00000100)        /*!<Data End Interrupt Enable                  */
+#define  SDMMC_MASK_DBCKENDIE                 ((uint32_t)0x00000400)        /*!<Data Block End Interrupt Enable            */
+#define  SDMMC_MASK_CMDACTIE                  ((uint32_t)0x00000800)        /*!<CCommand Acting Interrupt Enable           */
+#define  SDMMC_MASK_TXACTIE                   ((uint32_t)0x00001000)        /*!<Data Transmit Acting Interrupt Enable      */
+#define  SDMMC_MASK_RXACTIE                   ((uint32_t)0x00002000)        /*!<Data receive acting interrupt enabled      */
+#define  SDMMC_MASK_TXFIFOHEIE                ((uint32_t)0x00004000)        /*!<Tx FIFO Half Empty interrupt Enable        */
+#define  SDMMC_MASK_RXFIFOHFIE                ((uint32_t)0x00008000)        /*!<Rx FIFO Half Full interrupt Enable         */
+#define  SDMMC_MASK_TXFIFOFIE                 ((uint32_t)0x00010000)        /*!<Tx FIFO Full interrupt Enable              */
+#define  SDMMC_MASK_RXFIFOFIE                 ((uint32_t)0x00020000)        /*!<Rx FIFO Full interrupt Enable              */
+#define  SDMMC_MASK_TXFIFOEIE                 ((uint32_t)0x00040000)        /*!<Tx FIFO Empty interrupt Enable             */
+#define  SDMMC_MASK_RXFIFOEIE                 ((uint32_t)0x00080000)        /*!<Rx FIFO Empty interrupt Enable             */
+#define  SDMMC_MASK_TXDAVLIE                  ((uint32_t)0x00100000)        /*!<Data available in Tx FIFO interrupt Enable */
+#define  SDMMC_MASK_RXDAVLIE                  ((uint32_t)0x00200000)        /*!<Data available in Rx FIFO interrupt Enable */
+#define  SDMMC_MASK_SDIOITIE                  ((uint32_t)0x00400000)        /*!<SDMMC Mode Interrupt Received interrupt Enable */
+
+/*****************  Bit definition for SDMMC_FIFOCNT register  *****************/
+#define  SDMMC_FIFOCNT_FIFOCOUNT              ((uint32_t)0x00FFFFFF)        /*!<Remaining number of words to be written to or read from the FIFO */
+
+/******************  Bit definition for SDMMC_FIFO register  *******************/
+#define  SDMMC_FIFO_FIFODATA                  ((uint32_t)0xFFFFFFFF)        /*!<Receive and transmit FIFO data */
+
+/******************************************************************************/
+/*                                                                            */
+/*                        Serial Peripheral Interface (SPI)                   */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for SPI_CR1 register  ********************/
+#define  SPI_CR1_CPHA                        ((uint32_t)0x00000001)        /*!< Clock Phase                        */
+#define  SPI_CR1_CPOL                        ((uint32_t)0x00000002)        /*!< Clock Polarity                     */
+#define  SPI_CR1_MSTR                        ((uint32_t)0x00000004)        /*!< Master Selection                   */
+#define  SPI_CR1_BR                          ((uint32_t)0x00000038)        /*!< BR[2:0] bits (Baud Rate Control)   */
+#define  SPI_CR1_BR_0                        ((uint32_t)0x00000008)        /*!< Bit 0 */
+#define  SPI_CR1_BR_1                        ((uint32_t)0x00000010)        /*!< Bit 1 */
+#define  SPI_CR1_BR_2                        ((uint32_t)0x00000020)        /*!< Bit 2 */
+#define  SPI_CR1_SPE                         ((uint32_t)0x00000040)        /*!< SPI Enable                          */
+#define  SPI_CR1_LSBFIRST                    ((uint32_t)0x00000080)        /*!< Frame Format                        */
+#define  SPI_CR1_SSI                         ((uint32_t)0x00000100)        /*!< Internal slave select               */
+#define  SPI_CR1_SSM                         ((uint32_t)0x00000200)        /*!< Software slave management           */
+#define  SPI_CR1_RXONLY                      ((uint32_t)0x00000400)        /*!< Receive only                        */
+#define  SPI_CR1_CRCL                        ((uint32_t)0x00000800)        /*!< CRC Length                          */
+#define  SPI_CR1_CRCNEXT                     ((uint32_t)0x00001000)        /*!< Transmit CRC next                   */
+#define  SPI_CR1_CRCEN                       ((uint32_t)0x00002000)        /*!< Hardware CRC calculation enable     */
+#define  SPI_CR1_BIDIOE                      ((uint32_t)0x00004000)        /*!< Output enable in bidirectional mode */
+#define  SPI_CR1_BIDIMODE                    ((uint32_t)0x00008000)        /*!< Bidirectional data mode enable      */
+
+/*******************  Bit definition for SPI_CR2 register  ********************/
+#define  SPI_CR2_RXDMAEN                     ((uint32_t)0x00000001)        /*!< Rx Buffer DMA Enable                 */
+#define  SPI_CR2_TXDMAEN                     ((uint32_t)0x00000002)        /*!< Tx Buffer DMA Enable                 */
+#define  SPI_CR2_SSOE                        ((uint32_t)0x00000004)        /*!< SS Output Enable                     */
+#define  SPI_CR2_NSSP                        ((uint32_t)0x00000008)        /*!< NSS pulse management Enable          */
+#define  SPI_CR2_FRF                         ((uint32_t)0x00000010)        /*!< Frame Format Enable                  */
+#define  SPI_CR2_ERRIE                       ((uint32_t)0x00000020)        /*!< Error Interrupt Enable               */
+#define  SPI_CR2_RXNEIE                      ((uint32_t)0x00000040)        /*!< RX buffer Not Empty Interrupt Enable */
+#define  SPI_CR2_TXEIE                       ((uint32_t)0x00000080)        /*!< Tx buffer Empty Interrupt Enable     */
+#define  SPI_CR2_DS                          ((uint32_t)0x00000F00)        /*!< DS[3:0] Data Size                    */
+#define  SPI_CR2_DS_0                        ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  SPI_CR2_DS_1                        ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  SPI_CR2_DS_2                        ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  SPI_CR2_DS_3                        ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  SPI_CR2_FRXTH                       ((uint32_t)0x00001000)        /*!< FIFO reception Threshold           */
+#define  SPI_CR2_LDMARX                      ((uint32_t)0x00002000)        /*!< Last DMA transfer for reception    */
+#define  SPI_CR2_LDMATX                      ((uint32_t)0x00004000)        /*!< Last DMA transfer for transmission */
+
+/********************  Bit definition for SPI_SR register  ********************/
+#define  SPI_SR_RXNE                         ((uint32_t)0x00000001)        /*!< Receive buffer Not Empty  */
+#define  SPI_SR_TXE                          ((uint32_t)0x00000002)        /*!< Transmit buffer Empty     */
+#define  SPI_SR_CHSIDE                       ((uint32_t)0x00000004)        /*!< Channel side              */
+#define  SPI_SR_UDR                          ((uint32_t)0x00000008)        /*!< Underrun flag             */
+#define  SPI_SR_CRCERR                       ((uint32_t)0x00000010)        /*!< CRC Error flag            */
+#define  SPI_SR_MODF                         ((uint32_t)0x00000020)        /*!< Mode fault                */
+#define  SPI_SR_OVR                          ((uint32_t)0x00000040)        /*!< Overrun flag              */
+#define  SPI_SR_BSY                          ((uint32_t)0x00000080)        /*!< Busy flag                 */
+#define  SPI_SR_FRE                          ((uint32_t)0x00000100)        /*!< TI frame format error     */
+#define  SPI_SR_FRLVL                        ((uint32_t)0x00000600)        /*!< FIFO Reception Level      */
+#define  SPI_SR_FRLVL_0                      ((uint32_t)0x00000200)        /*!< Bit 0 */
+#define  SPI_SR_FRLVL_1                      ((uint32_t)0x00000400)        /*!< Bit 1 */
+#define  SPI_SR_FTLVL                        ((uint32_t)0x00001800)        /*!< FIFO Transmission Level   */
+#define  SPI_SR_FTLVL_0                      ((uint32_t)0x00000800)        /*!< Bit 0 */
+#define  SPI_SR_FTLVL_1                      ((uint32_t)0x00001000)        /*!< Bit 1 */  
+
+/********************  Bit definition for SPI_DR register  ********************/
+#define  SPI_DR_DR                           ((uint32_t)0xFFFF)            /*!< Data Register */
+
+/*******************  Bit definition for SPI_CRCPR register  ******************/
+#define  SPI_CRCPR_CRCPOLY                   ((uint32_t)0xFFFF)            /*!< CRC polynomial register */
+
+/******************  Bit definition for SPI_RXCRCR register  ******************/
+#define  SPI_RXCRCR_RXCRC                    ((uint32_t)0xFFFF)            /*!< Rx CRC Register */
+
+/******************  Bit definition for SPI_TXCRCR register  ******************/
+#define  SPI_TXCRCR_TXCRC                    ((uint32_t)0xFFFF)            /*!< Tx CRC Register */
+
+/******************  Bit definition for SPI_I2SCFGR register  *****************/
+#define  SPI_I2SCFGR_CHLEN                   ((uint32_t)0x00000001)        /*!<Channel length (number of bits per audio channel) */
+#define  SPI_I2SCFGR_DATLEN                  ((uint32_t)0x00000006)        /*!<DATLEN[1:0] bits (Data length to be transferred)  */
+#define  SPI_I2SCFGR_DATLEN_0                ((uint32_t)0x00000002)        /*!<Bit 0 */
+#define  SPI_I2SCFGR_DATLEN_1                ((uint32_t)0x00000004)        /*!<Bit 1 */
+#define  SPI_I2SCFGR_CKPOL                   ((uint32_t)0x00000008)        /*!<steady state clock polarity                       */
+#define  SPI_I2SCFGR_I2SSTD                  ((uint32_t)0x00000030)        /*!<I2SSTD[1:0] bits (I2S standard selection)         */
+#define  SPI_I2SCFGR_I2SSTD_0                ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  SPI_I2SCFGR_I2SSTD_1                ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  SPI_I2SCFGR_PCMSYNC                 ((uint32_t)0x00000080)        /*!<PCM frame synchronization                         */
+#define  SPI_I2SCFGR_I2SCFG                  ((uint32_t)0x00000300)        /*!<I2SCFG[1:0] bits (I2S configuration mode)         */
+#define  SPI_I2SCFGR_I2SCFG_0                ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  SPI_I2SCFGR_I2SCFG_1                ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  SPI_I2SCFGR_I2SE                    ((uint32_t)0x00000400)        /*!<I2S Enable                                        */
+#define  SPI_I2SCFGR_I2SMOD                  ((uint32_t)0x00000800)        /*!<I2S mode selection                                */
+#define  SPI_I2SCFGR_ASTRTEN                 ((uint32_t)0x00001000)        /*!<Asynchronous start enable                        */
+
+/******************  Bit definition for SPI_I2SPR register  *******************/
+#define  SPI_I2SPR_I2SDIV                    ((uint32_t)0x00FF)            /*!<I2S Linear prescaler         */
+#define  SPI_I2SPR_ODD                       ((uint32_t)0x0100)            /*!<Odd factor for the prescaler */
+#define  SPI_I2SPR_MCKOE                     ((uint32_t)0x0200)            /*!<Master Clock Output Enable   */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                                 SYSCFG                                     */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for SYSCFG_MEMRMP register  ***************/  
+#define SYSCFG_MEMRMP_MEM_BOOT         ((uint32_t)0x00000001) /*!< Boot information after Reset */
+
+
+#define SYSCFG_MEMRMP_SWP_FMC          ((uint32_t)0x00000C00) /*!< FMC Memory Mapping swapping */
+#define SYSCFG_MEMRMP_SWP_FMC_0        ((uint32_t)0x00000400) 
+#define SYSCFG_MEMRMP_SWP_FMC_1        ((uint32_t)0x00000800) 
+
+/******************  Bit definition for SYSCFG_PMC register  ******************/
+
+#define SYSCFG_PMC_ADCxDC2              ((uint32_t)0x00070000) /*!< Refer to AN4073 on how to use this bit  */
+#define SYSCFG_PMC_ADC1DC2              ((uint32_t)0x00010000) /*!< Refer to AN4073 on how to use this bit  */
+#define SYSCFG_PMC_ADC2DC2              ((uint32_t)0x00020000) /*!< Refer to AN4073 on how to use this bit  */
+#define SYSCFG_PMC_ADC3DC2              ((uint32_t)0x00040000) /*!< Refer to AN4073 on how to use this bit  */
+
+#define SYSCFG_PMC_MII_RMII_SEL         ((uint32_t)0x00800000) /*!<Ethernet PHY interface selection */
+
+/*****************  Bit definition for SYSCFG_EXTICR1 register  ***************/
+#define SYSCFG_EXTICR1_EXTI0            ((uint32_t)0x000F) /*!<EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1            ((uint32_t)0x00F0) /*!<EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2            ((uint32_t)0x0F00) /*!<EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3            ((uint32_t)0xF000) /*!<EXTI 3 configuration */
+/** 
+  * @brief   EXTI0 configuration  
+  */ 
+#define SYSCFG_EXTICR1_EXTI0_PA         ((uint32_t)0x0000) /*!<PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB         ((uint32_t)0x0001) /*!<PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC         ((uint32_t)0x0002) /*!<PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD         ((uint32_t)0x0003) /*!<PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE         ((uint32_t)0x0004) /*!<PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF         ((uint32_t)0x0005) /*!<PF[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PG         ((uint32_t)0x0006) /*!<PG[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH         ((uint32_t)0x0007) /*!<PH[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PI         ((uint32_t)0x0008) /*!<PI[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PJ         ((uint32_t)0x0009) /*!<PJ[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PK         ((uint32_t)0x000A) /*!<PK[0] pin */
+
+/** 
+  * @brief   EXTI1 configuration  
+  */ 
+#define SYSCFG_EXTICR1_EXTI1_PA         ((uint32_t)0x0000) /*!<PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB         ((uint32_t)0x0010) /*!<PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC         ((uint32_t)0x0020) /*!<PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD         ((uint32_t)0x0030) /*!<PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE         ((uint32_t)0x0040) /*!<PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF         ((uint32_t)0x0050) /*!<PF[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PG         ((uint32_t)0x0060) /*!<PG[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH         ((uint32_t)0x0070) /*!<PH[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PI         ((uint32_t)0x0080) /*!<PI[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PJ         ((uint32_t)0x0090) /*!<PJ[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PK         ((uint32_t)0x00A0) /*!<PK[1] pin */
+
+/** 
+  * @brief   EXTI2 configuration  
+  */ 
+#define SYSCFG_EXTICR1_EXTI2_PA         ((uint32_t)0x0000) /*!<PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB         ((uint32_t)0x0100) /*!<PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC         ((uint32_t)0x0200) /*!<PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD         ((uint32_t)0x0300) /*!<PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE         ((uint32_t)0x0400) /*!<PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF         ((uint32_t)0x0500) /*!<PF[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PG         ((uint32_t)0x0600) /*!<PG[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH         ((uint32_t)0x0700) /*!<PH[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PI         ((uint32_t)0x0800) /*!<PI[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PJ         ((uint32_t)0x0900) /*!<PJ[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PK         ((uint32_t)0x0A00) /*!<PK[2] pin */
+
+/** 
+  * @brief   EXTI3 configuration  
+  */ 
+#define SYSCFG_EXTICR1_EXTI3_PA         ((uint32_t)0x0000) /*!<PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB         ((uint32_t)0x1000) /*!<PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC         ((uint32_t)0x2000) /*!<PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD         ((uint32_t)0x3000) /*!<PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE         ((uint32_t)0x4000) /*!<PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF         ((uint32_t)0x5000) /*!<PF[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PG         ((uint32_t)0x6000) /*!<PG[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PH         ((uint32_t)0x7000) /*!<PH[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PI         ((uint32_t)0x8000) /*!<PI[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PJ         ((uint32_t)0x9000) /*!<PJ[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PK         ((uint32_t)0xA000) /*!<PK[3] pin */
+
+/*****************  Bit definition for SYSCFG_EXTICR2 register  ***************/
+#define SYSCFG_EXTICR2_EXTI4            ((uint32_t)0x000F) /*!<EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5            ((uint32_t)0x00F0) /*!<EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6            ((uint32_t)0x0F00) /*!<EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7            ((uint32_t)0xF000) /*!<EXTI 7 configuration */
+/** 
+  * @brief   EXTI4 configuration  
+  */ 
+#define SYSCFG_EXTICR2_EXTI4_PA         ((uint32_t)0x0000) /*!<PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB         ((uint32_t)0x0001) /*!<PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC         ((uint32_t)0x0002) /*!<PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD         ((uint32_t)0x0003) /*!<PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE         ((uint32_t)0x0004) /*!<PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF         ((uint32_t)0x0005) /*!<PF[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PG         ((uint32_t)0x0006) /*!<PG[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH         ((uint32_t)0x0007) /*!<PH[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PI         ((uint32_t)0x0008) /*!<PI[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PJ         ((uint32_t)0x0009) /*!<PJ[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PK         ((uint32_t)0x000A) /*!<PK[4] pin */
+
+/** 
+  * @brief   EXTI5 configuration  
+  */ 
+#define SYSCFG_EXTICR2_EXTI5_PA         ((uint32_t)0x0000) /*!<PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB         ((uint32_t)0x0010) /*!<PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC         ((uint32_t)0x0020) /*!<PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD         ((uint32_t)0x0030) /*!<PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE         ((uint32_t)0x0040) /*!<PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF         ((uint32_t)0x0050) /*!<PF[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PG         ((uint32_t)0x0060) /*!<PG[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PH         ((uint32_t)0x0070) /*!<PH[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PI         ((uint32_t)0x0080) /*!<PI[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PJ         ((uint32_t)0x0090) /*!<PJ[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PK         ((uint32_t)0x00A0) /*!<PK[5] pin */
+
+/** 
+  * @brief   EXTI6 configuration  
+  */ 
+#define SYSCFG_EXTICR2_EXTI6_PA         ((uint32_t)0x0000) /*!<PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB         ((uint32_t)0x0100) /*!<PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC         ((uint32_t)0x0200) /*!<PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD         ((uint32_t)0x0300) /*!<PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE         ((uint32_t)0x0400) /*!<PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF         ((uint32_t)0x0500) /*!<PF[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PG         ((uint32_t)0x0600) /*!<PG[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PH         ((uint32_t)0x0700) /*!<PH[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PI         ((uint32_t)0x0800) /*!<PI[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PJ         ((uint32_t)0x0900) /*!<PJ[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PK         ((uint32_t)0x0A00) /*!<PK[6] pin */
+
+/** 
+  * @brief   EXTI7 configuration  
+  */ 
+#define SYSCFG_EXTICR2_EXTI7_PA         ((uint32_t)0x0000) /*!<PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB         ((uint32_t)0x1000) /*!<PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC         ((uint32_t)0x2000) /*!<PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD         ((uint32_t)0x3000) /*!<PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE         ((uint32_t)0x4000) /*!<PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF         ((uint32_t)0x5000) /*!<PF[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PG         ((uint32_t)0x6000) /*!<PG[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PH         ((uint32_t)0x7000) /*!<PH[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PI         ((uint32_t)0x8000) /*!<PI[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PJ         ((uint32_t)0x9000) /*!<PJ[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PK         ((uint32_t)0xA000) /*!<PK[7] pin */
+
+/*****************  Bit definition for SYSCFG_EXTICR3 register  ***************/
+#define SYSCFG_EXTICR3_EXTI8            ((uint32_t)0x000F) /*!<EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9            ((uint32_t)0x00F0) /*!<EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10           ((uint32_t)0x0F00) /*!<EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11           ((uint32_t)0xF000) /*!<EXTI 11 configuration */
+           
+/** 
+  * @brief   EXTI8 configuration  
+  */ 
+#define SYSCFG_EXTICR3_EXTI8_PA         ((uint32_t)0x0000) /*!<PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB         ((uint32_t)0x0001) /*!<PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC         ((uint32_t)0x0002) /*!<PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD         ((uint32_t)0x0003) /*!<PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE         ((uint32_t)0x0004) /*!<PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF         ((uint32_t)0x0005) /*!<PF[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PG         ((uint32_t)0x0006) /*!<PG[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PH         ((uint32_t)0x0007) /*!<PH[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PI         ((uint32_t)0x0008) /*!<PI[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PJ         ((uint32_t)0x0009) /*!<PJ[8] pin */
+
+/** 
+  * @brief   EXTI9 configuration  
+  */ 
+#define SYSCFG_EXTICR3_EXTI9_PA         ((uint32_t)0x0000) /*!<PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB         ((uint32_t)0x0010) /*!<PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC         ((uint32_t)0x0020) /*!<PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD         ((uint32_t)0x0030) /*!<PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE         ((uint32_t)0x0040) /*!<PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF         ((uint32_t)0x0050) /*!<PF[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PG         ((uint32_t)0x0060) /*!<PG[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PH         ((uint32_t)0x0070) /*!<PH[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PI         ((uint32_t)0x0080) /*!<PI[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PJ         ((uint32_t)0x0090) /*!<PJ[9] pin */
+
+/** 
+  * @brief   EXTI10 configuration  
+  */ 
+#define SYSCFG_EXTICR3_EXTI10_PA        ((uint32_t)0x0000) /*!<PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB        ((uint32_t)0x0100) /*!<PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC        ((uint32_t)0x0200) /*!<PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD        ((uint32_t)0x0300) /*!<PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE        ((uint32_t)0x0400) /*!<PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF        ((uint32_t)0x0500) /*!<PF[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PG        ((uint32_t)0x0600) /*!<PG[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PH        ((uint32_t)0x0700) /*!<PH[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PI        ((uint32_t)0x0800) /*!<PI[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PJ        ((uint32_t)0x0900) /*!<PJ[10] pin */
+
+/** 
+  * @brief   EXTI11 configuration  
+  */ 
+#define SYSCFG_EXTICR3_EXTI11_PA        ((uint32_t)0x0000) /*!<PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB        ((uint32_t)0x1000) /*!<PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC        ((uint32_t)0x2000) /*!<PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD        ((uint32_t)0x3000) /*!<PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE        ((uint32_t)0x4000) /*!<PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF        ((uint32_t)0x5000) /*!<PF[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PG        ((uint32_t)0x6000) /*!<PG[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PH        ((uint32_t)0x7000) /*!<PH[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PI        ((uint32_t)0x8000) /*!<PI[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PJ        ((uint32_t)0x9000) /*!<PJ[11] pin */
+
+
+/*****************  Bit definition for SYSCFG_EXTICR4 register  ***************/
+#define SYSCFG_EXTICR4_EXTI12           ((uint32_t)0x000F) /*!<EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13           ((uint32_t)0x00F0) /*!<EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14           ((uint32_t)0x0F00) /*!<EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15           ((uint32_t)0xF000) /*!<EXTI 15 configuration */
+/** 
+  * @brief   EXTI12 configuration  
+  */ 
+#define SYSCFG_EXTICR4_EXTI12_PA        ((uint32_t)0x0000) /*!<PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB        ((uint32_t)0x0001) /*!<PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC        ((uint32_t)0x0002) /*!<PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD        ((uint32_t)0x0003) /*!<PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE        ((uint32_t)0x0004) /*!<PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF        ((uint32_t)0x0005) /*!<PF[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PG        ((uint32_t)0x0006) /*!<PG[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PH        ((uint32_t)0x0007) /*!<PH[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PI        ((uint32_t)0x0008) /*!<PI[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PJ        ((uint32_t)0x0009) /*!<PJ[12] pin */
+
+/** 
+  * @brief   EXTI13 configuration  
+  */ 
+#define SYSCFG_EXTICR4_EXTI13_PA        ((uint32_t)0x0000) /*!<PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB        ((uint32_t)0x0010) /*!<PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC        ((uint32_t)0x0020) /*!<PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD        ((uint32_t)0x0030) /*!<PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE        ((uint32_t)0x0040) /*!<PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF        ((uint32_t)0x0050) /*!<PF[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PG        ((uint32_t)0x0060) /*!<PG[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PH        ((uint32_t)0x0070) /*!<PH[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PI        ((uint32_t)0x0008) /*!<PI[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PJ        ((uint32_t)0x0009) /*!<PJ[13] pin */
+
+/** 
+  * @brief   EXTI14 configuration  
+  */ 
+#define SYSCFG_EXTICR4_EXTI14_PA        ((uint32_t)0x0000) /*!<PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB        ((uint32_t)0x0100) /*!<PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC        ((uint32_t)0x0200) /*!<PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD        ((uint32_t)0x0300) /*!<PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE        ((uint32_t)0x0400) /*!<PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF        ((uint32_t)0x0500) /*!<PF[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PG        ((uint32_t)0x0600) /*!<PG[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PH        ((uint32_t)0x0700) /*!<PH[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PI        ((uint32_t)0x0800) /*!<PI[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PJ        ((uint32_t)0x0900) /*!<PJ[14] pin */
+
+/** 
+  * @brief   EXTI15 configuration  
+  */ 
+#define SYSCFG_EXTICR4_EXTI15_PA        ((uint32_t)0x0000) /*!<PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB        ((uint32_t)0x1000) /*!<PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC        ((uint32_t)0x2000) /*!<PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD        ((uint32_t)0x3000) /*!<PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE        ((uint32_t)0x4000) /*!<PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF        ((uint32_t)0x5000) /*!<PF[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PG        ((uint32_t)0x6000) /*!<PG[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PH        ((uint32_t)0x7000) /*!<PH[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PI        ((uint32_t)0x8000) /*!<PI[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PJ        ((uint32_t)0x9000) /*!<PJ[15] pin */
+
+/******************  Bit definition for SYSCFG_CMPCR register  ****************/  
+#define SYSCFG_CMPCR_CMP_PD             ((uint32_t)0x00000001) /*!<Compensation cell power-down */
+#define SYSCFG_CMPCR_READY              ((uint32_t)0x00000100) /*!<Compensation cell ready flag*/
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    TIM                                     */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for TIM_CR1 register  ********************/
+#define  TIM_CR1_CEN                         ((uint32_t)0x0001)            /*!<Counter enable        */
+#define  TIM_CR1_UDIS                        ((uint32_t)0x0002)            /*!<Update disable        */
+#define  TIM_CR1_URS                         ((uint32_t)0x0004)            /*!<Update request source */
+#define  TIM_CR1_OPM                         ((uint32_t)0x0008)            /*!<One pulse mode        */
+#define  TIM_CR1_DIR                         ((uint32_t)0x0010)            /*!<Direction             */
+
+#define  TIM_CR1_CMS                         ((uint32_t)0x0060)            /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define  TIM_CR1_CMS_0                       ((uint32_t)0x0020)            /*!<Bit 0 */
+#define  TIM_CR1_CMS_1                       ((uint32_t)0x0040)            /*!<Bit 1 */
+
+#define  TIM_CR1_ARPE                        ((uint32_t)0x0080)            /*!<Auto-reload preload enable     */
+
+#define  TIM_CR1_CKD                         ((uint32_t)0x0300)            /*!<CKD[1:0] bits (clock division) */
+#define  TIM_CR1_CKD_0                       ((uint32_t)0x0100)            /*!<Bit 0 */
+#define  TIM_CR1_CKD_1                       ((uint32_t)0x0200)            /*!<Bit 1 */
+#define  TIM_CR1_UIFREMAP                    ((uint32_t)0x0800)            /*!<UIF status bit */
+
+/*******************  Bit definition for TIM_CR2 register  ********************/
+#define  TIM_CR2_CCPC                        ((uint32_t)0x00000001)            /*!<Capture/Compare Preloaded Control        */
+#define  TIM_CR2_CCUS                        ((uint32_t)0x00000004)            /*!<Capture/Compare Control Update Selection */
+#define  TIM_CR2_CCDS                        ((uint32_t)0x00000008)            /*!<Capture/Compare DMA Selection            */
+
+#define  TIM_CR2_OIS5                        ((uint32_t)0x00010000)            /*!<Output Idle state 4 (OC4 output) */
+#define  TIM_CR2_OIS6                        ((uint32_t)0x00040000)            /*!<Output Idle state 4 (OC4 output) */
+
+#define  TIM_CR2_MMS                         ((uint32_t)0x0070)            /*!<MMS[2:0] bits (Master Mode Selection) */
+#define  TIM_CR2_MMS_0                       ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_CR2_MMS_1                       ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_CR2_MMS_2                       ((uint32_t)0x0040)            /*!<Bit 2 */
+
+#define  TIM_CR2_MMS2                        ((uint32_t)0x00F00000)            /*!<MMS[2:0] bits (Master Mode Selection) */
+#define  TIM_CR2_MMS2_0                      ((uint32_t)0x00100000)            /*!<Bit 0 */
+#define  TIM_CR2_MMS2_1                      ((uint32_t)0x00200000)            /*!<Bit 1 */
+#define  TIM_CR2_MMS2_2                      ((uint32_t)0x00400000)            /*!<Bit 2 */
+#define  TIM_CR2_MMS2_3                      ((uint32_t)0x00800000)            /*!<Bit 2 */
+
+#define  TIM_CR2_TI1S                        ((uint32_t)0x0080)            /*!<TI1 Selection */
+#define  TIM_CR2_OIS1                        ((uint32_t)0x0100)            /*!<Output Idle state 1 (OC1 output)  */
+#define  TIM_CR2_OIS1N                       ((uint32_t)0x0200)            /*!<Output Idle state 1 (OC1N output) */
+#define  TIM_CR2_OIS2                        ((uint32_t)0x0400)            /*!<Output Idle state 2 (OC2 output)  */
+#define  TIM_CR2_OIS2N                       ((uint32_t)0x0800)            /*!<Output Idle state 2 (OC2N output) */
+#define  TIM_CR2_OIS3                        ((uint32_t)0x1000)            /*!<Output Idle state 3 (OC3 output)  */
+#define  TIM_CR2_OIS3N                       ((uint32_t)0x2000)            /*!<Output Idle state 3 (OC3N output) */
+#define  TIM_CR2_OIS4                        ((uint32_t)0x4000)            /*!<Output Idle state 4 (OC4 output)  */
+
+/*******************  Bit definition for TIM_SMCR register  *******************/
+#define  TIM_SMCR_SMS                        ((uint32_t)0x00010007)            /*!<SMS[2:0] bits (Slave mode selection)    */
+#define  TIM_SMCR_SMS_0                      ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define  TIM_SMCR_SMS_1                      ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define  TIM_SMCR_SMS_2                      ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define  TIM_SMCR_SMS_3                      ((uint32_t)0x00010000)            /*!<Bit 3 */
+#define  TIM_SMCR_OCCS                       ((uint32_t)0x00000008)            /*!< OCREF clear selection */
+
+#define  TIM_SMCR_TS                         ((uint32_t)0x0070)            /*!<TS[2:0] bits (Trigger selection)        */
+#define  TIM_SMCR_TS_0                       ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_SMCR_TS_1                       ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_SMCR_TS_2                       ((uint32_t)0x0040)            /*!<Bit 2 */
+
+#define  TIM_SMCR_MSM                        ((uint32_t)0x0080)            /*!<Master/slave mode                       */
+
+#define  TIM_SMCR_ETF                        ((uint32_t)0x0F00)            /*!<ETF[3:0] bits (External trigger filter) */
+#define  TIM_SMCR_ETF_0                      ((uint32_t)0x0100)            /*!<Bit 0 */
+#define  TIM_SMCR_ETF_1                      ((uint32_t)0x0200)            /*!<Bit 1 */
+#define  TIM_SMCR_ETF_2                      ((uint32_t)0x0400)            /*!<Bit 2 */
+#define  TIM_SMCR_ETF_3                      ((uint32_t)0x0800)            /*!<Bit 3 */
+
+#define  TIM_SMCR_ETPS                       ((uint32_t)0x3000)            /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define  TIM_SMCR_ETPS_0                     ((uint32_t)0x1000)            /*!<Bit 0 */
+#define  TIM_SMCR_ETPS_1                     ((uint32_t)0x2000)            /*!<Bit 1 */
+
+
+#define  TIM_SMCR_ECE                        ((uint32_t)0x4000)            /*!<External clock enable     */
+#define  TIM_SMCR_ETP                        ((uint32_t)0x8000)            /*!<External trigger polarity */
+
+/*******************  Bit definition for TIM_DIER register  *******************/
+#define  TIM_DIER_UIE                        ((uint32_t)0x0001)            /*!<Update interrupt enable */
+#define  TIM_DIER_CC1IE                      ((uint32_t)0x0002)            /*!<Capture/Compare 1 interrupt enable   */
+#define  TIM_DIER_CC2IE                      ((uint32_t)0x0004)            /*!<Capture/Compare 2 interrupt enable   */
+#define  TIM_DIER_CC3IE                      ((uint32_t)0x0008)            /*!<Capture/Compare 3 interrupt enable   */
+#define  TIM_DIER_CC4IE                      ((uint32_t)0x0010)            /*!<Capture/Compare 4 interrupt enable   */
+#define  TIM_DIER_COMIE                      ((uint32_t)0x0020)            /*!<COM interrupt enable                 */
+#define  TIM_DIER_TIE                        ((uint32_t)0x0040)            /*!<Trigger interrupt enable             */
+#define  TIM_DIER_BIE                        ((uint32_t)0x0080)            /*!<Break interrupt enable               */
+#define  TIM_DIER_UDE                        ((uint32_t)0x0100)            /*!<Update DMA request enable            */
+#define  TIM_DIER_CC1DE                      ((uint32_t)0x0200)            /*!<Capture/Compare 1 DMA request enable */
+#define  TIM_DIER_CC2DE                      ((uint32_t)0x0400)            /*!<Capture/Compare 2 DMA request enable */
+#define  TIM_DIER_CC3DE                      ((uint32_t)0x0800)            /*!<Capture/Compare 3 DMA request enable */
+#define  TIM_DIER_CC4DE                      ((uint32_t)0x1000)            /*!<Capture/Compare 4 DMA request enable */
+#define  TIM_DIER_COMDE                      ((uint32_t)0x2000)            /*!<COM DMA request enable               */
+#define  TIM_DIER_TDE                        ((uint32_t)0x4000)            /*!<Trigger DMA request enable           */
+
+/********************  Bit definition for TIM_SR register  ********************/
+#define  TIM_SR_UIF                          ((uint32_t)0x0001)            /*!<Update interrupt Flag              */
+#define  TIM_SR_CC1IF                        ((uint32_t)0x0002)            /*!<Capture/Compare 1 interrupt Flag   */
+#define  TIM_SR_CC2IF                        ((uint32_t)0x0004)            /*!<Capture/Compare 2 interrupt Flag   */
+#define  TIM_SR_CC3IF                        ((uint32_t)0x0008)            /*!<Capture/Compare 3 interrupt Flag   */
+#define  TIM_SR_CC4IF                        ((uint32_t)0x0010)            /*!<Capture/Compare 4 interrupt Flag   */
+#define  TIM_SR_COMIF                        ((uint32_t)0x0020)            /*!<COM interrupt Flag                 */
+#define  TIM_SR_TIF                          ((uint32_t)0x0040)            /*!<Trigger interrupt Flag             */
+#define  TIM_SR_BIF                          ((uint32_t)0x0080)            /*!<Break interrupt Flag               */
+#define  TIM_SR_B2IF                         ((uint32_t)0x0100)            /*!<Break2 interrupt Flag               */
+#define  TIM_SR_CC1OF                        ((uint32_t)0x0200)            /*!<Capture/Compare 1 Overcapture Flag */
+#define  TIM_SR_CC2OF                        ((uint32_t)0x0400)            /*!<Capture/Compare 2 Overcapture Flag */
+#define  TIM_SR_CC3OF                        ((uint32_t)0x0800)            /*!<Capture/Compare 3 Overcapture Flag */
+#define  TIM_SR_CC4OF                        ((uint32_t)0x1000)            /*!<Capture/Compare 4 Overcapture Flag */
+
+/*******************  Bit definition for TIM_EGR register  ********************/
+#define  TIM_EGR_UG                          ((uint32_t)0x00000001)               /*!<Update Generation                         */
+#define  TIM_EGR_CC1G                        ((uint32_t)0x00000002)               /*!<Capture/Compare 1 Generation              */
+#define  TIM_EGR_CC2G                        ((uint32_t)0x00000004)               /*!<Capture/Compare 2 Generation              */
+#define  TIM_EGR_CC3G                        ((uint32_t)0x00000008)               /*!<Capture/Compare 3 Generation              */
+#define  TIM_EGR_CC4G                        ((uint32_t)0x00000010)               /*!<Capture/Compare 4 Generation              */
+#define  TIM_EGR_COMG                        ((uint32_t)0x00000020)               /*!<Capture/Compare Control Update Generation */
+#define  TIM_EGR_TG                          ((uint32_t)0x00000040)               /*!<Trigger Generation                        */
+#define  TIM_EGR_BG                          ((uint32_t)0x00000080)               /*!<Break Generation                          */
+#define  TIM_EGR_B2G                         ((uint32_t)0x00000100)              /*!<Break2 Generation                          */
+
+/******************  Bit definition for TIM_CCMR1 register  *******************/
+#define  TIM_CCMR1_CC1S                      ((uint32_t)0x00000003)            /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define  TIM_CCMR1_CC1S_0                    ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define  TIM_CCMR1_CC1S_1                    ((uint32_t)0x00000002)            /*!<Bit 1 */
+
+#define  TIM_CCMR1_OC1FE                     ((uint32_t)0x00000004)            /*!<Output Compare 1 Fast enable                 */
+#define  TIM_CCMR1_OC1PE                     ((uint32_t)0x00000008)            /*!<Output Compare 1 Preload enable              */
+
+#define  TIM_CCMR1_OC1M                      ((uint32_t)0x00010070)            /*!<OC1M[2:0] bits (Output Compare 1 Mode)       */
+#define  TIM_CCMR1_OC1M_0                    ((uint32_t)0x00000010)            /*!<Bit 0 */
+#define  TIM_CCMR1_OC1M_1                    ((uint32_t)0x00000020)            /*!<Bit 1 */
+#define  TIM_CCMR1_OC1M_2                    ((uint32_t)0x00000040)            /*!<Bit 2 */
+#define  TIM_CCMR1_OC1M_3                    ((uint32_t)0x00010000)            /*!<Bit 3 */
+
+#define  TIM_CCMR1_OC1CE                     ((uint32_t)0x00000080)            /*!<Output Compare 1Clear Enable                 */
+
+#define  TIM_CCMR1_CC2S                      ((uint32_t)0x00000300)            /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define  TIM_CCMR1_CC2S_0                    ((uint32_t)0x00000100)            /*!<Bit 0 */
+#define  TIM_CCMR1_CC2S_1                    ((uint32_t)0x00000200)            /*!<Bit 1 */
+
+#define  TIM_CCMR1_OC2FE                     ((uint32_t)0x00000400)            /*!<Output Compare 2 Fast enable                 */
+#define  TIM_CCMR1_OC2PE                     ((uint32_t)0x00000800)            /*!<Output Compare 2 Preload enable              */
+
+#define  TIM_CCMR1_OC2M                      ((uint32_t)0x01007000)            /*!<OC2M[2:0] bits (Output Compare 2 Mode)       */
+#define  TIM_CCMR1_OC2M_0                    ((uint32_t)0x00001000)            /*!<Bit 0 */
+#define  TIM_CCMR1_OC2M_1                    ((uint32_t)0x00002000)            /*!<Bit 1 */
+#define  TIM_CCMR1_OC2M_2                    ((uint32_t)0x00004000)            /*!<Bit 2 */
+#define  TIM_CCMR1_OC2M_3                    ((uint32_t)0x01000000)            /*!<Bit 3 */
+
+#define  TIM_CCMR1_OC2CE                     ((uint32_t)0x00008000)            /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define  TIM_CCMR1_IC1PSC                    ((uint32_t)0x000C)            /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define  TIM_CCMR1_IC1PSC_0                  ((uint32_t)0x0004)            /*!<Bit 0 */
+#define  TIM_CCMR1_IC1PSC_1                  ((uint32_t)0x0008)            /*!<Bit 1 */
+
+#define  TIM_CCMR1_IC1F                      ((uint32_t)0x00F0)            /*!<IC1F[3:0] bits (Input Capture 1 Filter)      */
+#define  TIM_CCMR1_IC1F_0                    ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_CCMR1_IC1F_1                    ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_CCMR1_IC1F_2                    ((uint32_t)0x0040)            /*!<Bit 2 */
+#define  TIM_CCMR1_IC1F_3                    ((uint32_t)0x0080)            /*!<Bit 3 */
+
+#define  TIM_CCMR1_IC2PSC                    ((uint32_t)0x0C00)            /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler)  */
+#define  TIM_CCMR1_IC2PSC_0                  ((uint32_t)0x0400)            /*!<Bit 0 */
+#define  TIM_CCMR1_IC2PSC_1                  ((uint32_t)0x0800)            /*!<Bit 1 */
+
+#define  TIM_CCMR1_IC2F                      ((uint32_t)0xF000)            /*!<IC2F[3:0] bits (Input Capture 2 Filter)       */
+#define  TIM_CCMR1_IC2F_0                    ((uint32_t)0x1000)            /*!<Bit 0 */
+#define  TIM_CCMR1_IC2F_1                    ((uint32_t)0x2000)            /*!<Bit 1 */
+#define  TIM_CCMR1_IC2F_2                    ((uint32_t)0x4000)            /*!<Bit 2 */
+#define  TIM_CCMR1_IC2F_3                    ((uint32_t)0x8000)            /*!<Bit 3 */
+
+/******************  Bit definition for TIM_CCMR2 register  *******************/
+#define  TIM_CCMR2_CC3S                      ((uint32_t)0x00000003)        /*!<CC3S[1:0] bits (Capture/Compare 3 Selection)  */
+#define  TIM_CCMR2_CC3S_0                    ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  TIM_CCMR2_CC3S_1                    ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  TIM_CCMR2_OC3FE                     ((uint32_t)0x00000004)        /*!<Output Compare 3 Fast enable           */
+#define  TIM_CCMR2_OC3PE                     ((uint32_t)0x00000008)        /*!<Output Compare 3 Preload enable        */
+
+#define  TIM_CCMR2_OC3M                      ((uint32_t)0x00010070)        /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define  TIM_CCMR2_OC3M_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  TIM_CCMR2_OC3M_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  TIM_CCMR2_OC3M_2                    ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  TIM_CCMR2_OC3M_3                    ((uint32_t)0x00010000)        /*!<Bit 3 */
+
+
+
+#define  TIM_CCMR2_OC3CE                     ((uint32_t)0x00000080)        /*!<Output Compare 3 Clear Enable */
+
+#define  TIM_CCMR2_CC4S                      ((uint32_t)0x00000300)        /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define  TIM_CCMR2_CC4S_0                    ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  TIM_CCMR2_CC4S_1                    ((uint32_t)0x00000200)        /*!<Bit 1 */
+
+#define  TIM_CCMR2_OC4FE                     ((uint32_t)0x00000400)        /*!<Output Compare 4 Fast enable    */
+#define  TIM_CCMR2_OC4PE                     ((uint32_t)0x00000800)        /*!<Output Compare 4 Preload enable */
+
+#define  TIM_CCMR2_OC4M                      ((uint32_t)0x01007000)        /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define  TIM_CCMR2_OC4M_0                    ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  TIM_CCMR2_OC4M_1                    ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  TIM_CCMR2_OC4M_2                    ((uint32_t)0x00004000)        /*!<Bit 2 */
+#define  TIM_CCMR2_OC4M_3                    ((uint32_t)0x01000000)        /*!<Bit 3 */
+
+#define  TIM_CCMR2_OC4CE                     ((uint32_t)0x8000)            /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define  TIM_CCMR2_IC3PSC                    ((uint32_t)0x000C)            /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define  TIM_CCMR2_IC3PSC_0                  ((uint32_t)0x0004)            /*!<Bit 0 */
+#define  TIM_CCMR2_IC3PSC_1                  ((uint32_t)0x0008)            /*!<Bit 1 */
+
+#define  TIM_CCMR2_IC3F                      ((uint32_t)0x00F0)            /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define  TIM_CCMR2_IC3F_0                    ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_CCMR2_IC3F_1                    ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_CCMR2_IC3F_2                    ((uint32_t)0x0040)            /*!<Bit 2 */
+#define  TIM_CCMR2_IC3F_3                    ((uint32_t)0x0080)            /*!<Bit 3 */
+
+#define  TIM_CCMR2_IC4PSC                    ((uint32_t)0x0C00)            /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define  TIM_CCMR2_IC4PSC_0                  ((uint32_t)0x0400)            /*!<Bit 0 */
+#define  TIM_CCMR2_IC4PSC_1                  ((uint32_t)0x0800)            /*!<Bit 1 */
+
+#define  TIM_CCMR2_IC4F                      ((uint32_t)0xF000)            /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define  TIM_CCMR2_IC4F_0                    ((uint32_t)0x1000)            /*!<Bit 0 */
+#define  TIM_CCMR2_IC4F_1                    ((uint32_t)0x2000)            /*!<Bit 1 */
+#define  TIM_CCMR2_IC4F_2                    ((uint32_t)0x4000)            /*!<Bit 2 */
+#define  TIM_CCMR2_IC4F_3                    ((uint32_t)0x8000)            /*!<Bit 3 */
+
+/*******************  Bit definition for TIM_CCER register  *******************/
+#define  TIM_CCER_CC1E                       ((uint32_t)0x00000001)            /*!<Capture/Compare 1 output enable */
+#define  TIM_CCER_CC1P                       ((uint32_t)0x00000002)            /*!<Capture/Compare 1 output Polarity */
+#define  TIM_CCER_CC1NE                      ((uint32_t)0x00000004)            /*!<Capture/Compare 1 Complementary output enable */
+#define  TIM_CCER_CC1NP                      ((uint32_t)0x00000008)            /*!<Capture/Compare 1 Complementary output Polarity */
+#define  TIM_CCER_CC2E                       ((uint32_t)0x00000010)            /*!<Capture/Compare 2 output enable */
+#define  TIM_CCER_CC2P                       ((uint32_t)0x00000020)            /*!<Capture/Compare 2 output Polarity */
+#define  TIM_CCER_CC2NE                      ((uint32_t)0x00000040)            /*!<Capture/Compare 2 Complementary output enable */
+#define  TIM_CCER_CC2NP                      ((uint32_t)0x00000080)            /*!<Capture/Compare 2 Complementary output Polarity */
+#define  TIM_CCER_CC3E                       ((uint32_t)0x00000100)            /*!<Capture/Compare 3 output enable */
+#define  TIM_CCER_CC3P                       ((uint32_t)0x00000200)            /*!<Capture/Compare 3 output Polarity */
+#define  TIM_CCER_CC3NE                      ((uint32_t)0x00000400)            /*!<Capture/Compare 3 Complementary output enable */
+#define  TIM_CCER_CC3NP                      ((uint32_t)0x00000800)            /*!<Capture/Compare 3 Complementary output Polarity */
+#define  TIM_CCER_CC4E                       ((uint32_t)0x00001000)            /*!<Capture/Compare 4 output enable */
+#define  TIM_CCER_CC4P                       ((uint32_t)0x00002000)            /*!<Capture/Compare 4 output Polarity */
+#define  TIM_CCER_CC4NP                      ((uint32_t)0x00008000)            /*!<Capture/Compare 4 Complementary output Polarity */
+#define  TIM_CCER_CC5E                       ((uint32_t)0x00010000)            /*!<Capture/Compare 5 output enable */
+#define  TIM_CCER_CC5P                       ((uint32_t)0x00020000)            /*!<Capture/Compare 5 output Polarity */
+#define  TIM_CCER_CC6E                       ((uint32_t)0x00100000)            /*!<Capture/Compare 6 output enable */
+#define  TIM_CCER_CC6P                       ((uint32_t)0x00200000)            /*!<Capture/Compare 6 output Polarity */
+
+
+/*******************  Bit definition for TIM_CNT register  ********************/
+#define  TIM_CNT_CNT                         ((uint32_t)0xFFFF)            /*!<Counter Value            */
+
+/*******************  Bit definition for TIM_PSC register  ********************/
+#define  TIM_PSC_PSC                         ((uint32_t)0xFFFF)            /*!<Prescaler Value          */
+
+/*******************  Bit definition for TIM_ARR register  ********************/
+#define  TIM_ARR_ARR                         ((uint32_t)0xFFFF)            /*!<actual auto-reload Value */
+
+/*******************  Bit definition for TIM_RCR register  ********************/
+#define  TIM_RCR_REP                         ((uint8_t)0xFF)               /*!<Repetition Counter Value */
+
+/*******************  Bit definition for TIM_CCR1 register  *******************/
+#define  TIM_CCR1_CCR1                       ((uint32_t)0xFFFF)            /*!<Capture/Compare 1 Value  */
+
+/*******************  Bit definition for TIM_CCR2 register  *******************/
+#define  TIM_CCR2_CCR2                       ((uint32_t)0xFFFF)            /*!<Capture/Compare 2 Value  */
+
+/*******************  Bit definition for TIM_CCR3 register  *******************/
+#define  TIM_CCR3_CCR3                       ((uint32_t)0xFFFF)            /*!<Capture/Compare 3 Value  */
+
+/*******************  Bit definition for TIM_CCR4 register  *******************/
+#define  TIM_CCR4_CCR4                       ((uint32_t)0xFFFF)            /*!<Capture/Compare 4 Value  */
+
+/*******************  Bit definition for TIM_BDTR register  *******************/
+#define  TIM_BDTR_DTG                        ((uint32_t)0x000000FF)            /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define  TIM_BDTR_DTG_0                      ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define  TIM_BDTR_DTG_1                      ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define  TIM_BDTR_DTG_2                      ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define  TIM_BDTR_DTG_3                      ((uint32_t)0x00000008)            /*!<Bit 3 */
+#define  TIM_BDTR_DTG_4                      ((uint32_t)0x00000010)            /*!<Bit 4 */
+#define  TIM_BDTR_DTG_5                      ((uint32_t)0x00000020)            /*!<Bit 5 */
+#define  TIM_BDTR_DTG_6                      ((uint32_t)0x00000040)            /*!<Bit 6 */
+#define  TIM_BDTR_DTG_7                      ((uint32_t)0x00000080)            /*!<Bit 7 */
+
+#define  TIM_BDTR_LOCK                       ((uint32_t)0x00000300)            /*!<LOCK[1:0] bits (Lock Configuration) */
+#define  TIM_BDTR_LOCK_0                     ((uint32_t)0x00000100)            /*!<Bit 0 */
+#define  TIM_BDTR_LOCK_1                     ((uint32_t)0x00000200)            /*!<Bit 1 */
+
+#define  TIM_BDTR_OSSI                       ((uint32_t)0x00000400)            /*!<Off-State Selection for Idle mode */
+#define  TIM_BDTR_OSSR                       ((uint32_t)0x00000800)            /*!<Off-State Selection for Run mode  */
+#define  TIM_BDTR_BKE                        ((uint32_t)0x00001000)            /*!<Break enable                      */
+#define  TIM_BDTR_BKP                        ((uint32_t)0x00002000)            /*!<Break Polarity                    */
+#define  TIM_BDTR_AOE                        ((uint32_t)0x00004000)            /*!<Automatic Output enable           */
+#define  TIM_BDTR_MOE                        ((uint32_t)0x00008000)            /*!<Main Output enable                */
+#define  TIM_BDTR_BKF                        ((uint32_t)0x000F0000)            /*!<Break Filter for Break1 */
+#define  TIM_BDTR_BK2F                       ((uint32_t)0x00F00000)            /*!<Break Filter for Break2 */
+#define  TIM_BDTR_BK2E                       ((uint32_t)0x01000000)            /*!<Break enable for Break2 */
+#define  TIM_BDTR_BK2P                       ((uint32_t)0x02000000)            /*!<Break Polarity for Break2 */
+
+/*******************  Bit definition for TIM_DCR register  ********************/
+#define  TIM_DCR_DBA                         ((uint32_t)0x001F)            /*!<DBA[4:0] bits (DMA Base Address) */
+#define  TIM_DCR_DBA_0                       ((uint32_t)0x0001)            /*!<Bit 0 */
+#define  TIM_DCR_DBA_1                       ((uint32_t)0x0002)            /*!<Bit 1 */
+#define  TIM_DCR_DBA_2                       ((uint32_t)0x0004)            /*!<Bit 2 */
+#define  TIM_DCR_DBA_3                       ((uint32_t)0x0008)            /*!<Bit 3 */
+#define  TIM_DCR_DBA_4                       ((uint32_t)0x0010)            /*!<Bit 4 */
+
+#define  TIM_DCR_DBL                         ((uint32_t)0x1F00)            /*!<DBL[4:0] bits (DMA Burst Length) */
+#define  TIM_DCR_DBL_0                       ((uint32_t)0x0100)            /*!<Bit 0 */
+#define  TIM_DCR_DBL_1                       ((uint32_t)0x0200)            /*!<Bit 1 */
+#define  TIM_DCR_DBL_2                       ((uint32_t)0x0400)            /*!<Bit 2 */
+#define  TIM_DCR_DBL_3                       ((uint32_t)0x0800)            /*!<Bit 3 */
+#define  TIM_DCR_DBL_4                       ((uint32_t)0x1000)            /*!<Bit 4 */
+
+/*******************  Bit definition for TIM_DMAR register  *******************/
+#define  TIM_DMAR_DMAB                       ((uint32_t)0xFFFF)            /*!<DMA register for burst accesses                    */
+
+/*******************  Bit definition for TIM_OR register  *********************/
+#define TIM_OR_TI4_RMP                       ((uint32_t)0x00C0)            /*!<TI4_RMP[1:0] bits (TIM5 Input 4 remap)             */
+#define TIM_OR_TI4_RMP_0                     ((uint32_t)0x0040)            /*!<Bit 0 */
+#define TIM_OR_TI4_RMP_1                     ((uint32_t)0x0080)            /*!<Bit 1 */
+#define TIM_OR_ITR1_RMP                      ((uint32_t)0x0C00)            /*!<ITR1_RMP[1:0] bits (TIM2 Internal trigger 1 remap) */
+#define TIM_OR_ITR1_RMP_0                    ((uint32_t)0x0400)            /*!<Bit 0 */
+#define TIM_OR_ITR1_RMP_1                    ((uint32_t)0x0800)            /*!<Bit 1 */
+
+/******************  Bit definition for TIM_CCMR3 register  *******************/
+#define  TIM_CCMR3_OC5FE                     ((uint32_t)0x00000004)            /*!<Output Compare 5 Fast enable */
+#define  TIM_CCMR3_OC5PE                     ((uint32_t)0x00000008)            /*!<Output Compare 5 Preload enable */
+
+#define  TIM_CCMR3_OC5M                      ((uint32_t)0x00010070)            /*!<OC5M[2:0] bits (Output Compare 5 Mode) */
+#define  TIM_CCMR3_OC5M_0                    ((uint32_t)0x00000010)            /*!<Bit 0 */
+#define  TIM_CCMR3_OC5M_1                    ((uint32_t)0x00000020)            /*!<Bit 1 */
+#define  TIM_CCMR3_OC5M_2                    ((uint32_t)0x00000040)            /*!<Bit 2 */
+#define  TIM_CCMR3_OC5M_3                    ((uint32_t)0x00010000)            /*!<Bit 3 */
+
+#define  TIM_CCMR3_OC5CE                     ((uint32_t)0x00000080)            /*!<Output Compare 5 Clear Enable */
+
+#define  TIM_CCMR3_OC6FE                     ((uint32_t)0x00000400)            /*!<Output Compare 4 Fast enable */
+#define  TIM_CCMR3_OC6PE                     ((uint32_t)0x00000800)            /*!<Output Compare 4 Preload enable */
+
+#define  TIM_CCMR3_OC6M                      ((uint32_t)0x01007000)            /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define  TIM_CCMR3_OC6M_0                    ((uint32_t)0x00001000)            /*!<Bit 0 */
+#define  TIM_CCMR3_OC6M_1                    ((uint32_t)0x00002000)            /*!<Bit 1 */
+#define  TIM_CCMR3_OC6M_2                    ((uint32_t)0x00004000)            /*!<Bit 2 */
+#define  TIM_CCMR3_OC6M_3                    ((uint32_t)0x01000000)            /*!<Bit 3 */
+
+#define  TIM_CCMR3_OC6CE                     ((uint32_t)0x00008000)            /*!<Output Compare 4 Clear Enable */
+
+/*******************  Bit definition for TIM_CCR5 register  *******************/
+#define  TIM_CCR5_CCR5                       ((uint32_t)0xFFFFFFFF)        /*!<Capture/Compare 5 Value */
+#define  TIM_CCR5_GC5C1                      ((uint32_t)0x20000000)        /*!<Group Channel 5 and Channel 1 */
+#define  TIM_CCR5_GC5C2                      ((uint32_t)0x40000000)        /*!<Group Channel 5 and Channel 2 */
+#define  TIM_CCR5_GC5C3                      ((uint32_t)0x80000000)        /*!<Group Channel 5 and Channel 3 */
+
+/*******************  Bit definition for TIM_CCR6 register  *******************/
+#define  TIM_CCR6_CCR6                       ((uint16_t)0xFFFF)            /*!<Capture/Compare 6 Value */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                         Low Power Timer (LPTIM)                            */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for LPTIM_ISR register  *******************/
+#define  LPTIM_ISR_CMPM                         ((uint32_t)0x00000001)            /*!< Compare match                       */
+#define  LPTIM_ISR_ARRM                         ((uint32_t)0x00000002)            /*!< Autoreload match                    */
+#define  LPTIM_ISR_EXTTRIG                      ((uint32_t)0x00000004)            /*!< External trigger edge event         */
+#define  LPTIM_ISR_CMPOK                        ((uint32_t)0x00000008)            /*!< Compare register update OK          */
+#define  LPTIM_ISR_ARROK                        ((uint32_t)0x00000010)            /*!< Autoreload register update OK       */
+#define  LPTIM_ISR_UP                           ((uint32_t)0x00000020)            /*!< Counter direction change down to up */
+#define  LPTIM_ISR_DOWN                         ((uint32_t)0x00000040)            /*!< Counter direction change up to down */
+
+/******************  Bit definition for LPTIM_ICR register  *******************/
+#define  LPTIM_ICR_CMPMCF                       ((uint32_t)0x00000001)            /*!< Compare match Clear Flag                       */
+#define  LPTIM_ICR_ARRMCF                       ((uint32_t)0x00000002)            /*!< Autoreload match Clear Flag                    */
+#define  LPTIM_ICR_EXTTRIGCF                    ((uint32_t)0x00000004)            /*!< External trigger edge event Clear Flag         */
+#define  LPTIM_ICR_CMPOKCF                      ((uint32_t)0x00000008)            /*!< Compare register update OK Clear Flag          */
+#define  LPTIM_ICR_ARROKCF                      ((uint32_t)0x00000010)            /*!< Autoreload register update OK Clear Flag       */
+#define  LPTIM_ICR_UPCF                         ((uint32_t)0x00000020)            /*!< Counter direction change down to up Clear Flag */
+#define  LPTIM_ICR_DOWNCF                       ((uint32_t)0x00000040)            /*!< Counter direction change up to down Clear Flag */
+
+/******************  Bit definition for LPTIM_IER register ********************/
+#define  LPTIM_IER_CMPMIE                       ((uint32_t)0x00000001)            /*!< Compare match Interrupt Enable                       */
+#define  LPTIM_IER_ARRMIE                       ((uint32_t)0x00000002)            /*!< Autoreload match Interrupt Enable                    */
+#define  LPTIM_IER_EXTTRIGIE                    ((uint32_t)0x00000004)            /*!< External trigger edge event Interrupt Enable         */
+#define  LPTIM_IER_CMPOKIE                      ((uint32_t)0x00000008)            /*!< Compare register update OK Interrupt Enable          */
+#define  LPTIM_IER_ARROKIE                      ((uint32_t)0x00000010)            /*!< Autoreload register update OK Interrupt Enable       */
+#define  LPTIM_IER_UPIE                         ((uint32_t)0x00000020)            /*!< Counter direction change down to up Interrupt Enable */
+#define  LPTIM_IER_DOWNIE                       ((uint32_t)0x00000040)            /*!< Counter direction change up to down Interrupt Enable */
+
+/******************  Bit definition for LPTIM_CFGR register *******************/
+#define  LPTIM_CFGR_CKSEL                       ((uint32_t)0x00000001)             /*!< Clock selector */
+
+#define  LPTIM_CFGR_CKPOL                       ((uint32_t)0x00000006)             /*!< CKPOL[1:0] bits (Clock polarity) */
+#define  LPTIM_CFGR_CKPOL_0                     ((uint32_t)0x00000002)             /*!< Bit 0 */
+#define  LPTIM_CFGR_CKPOL_1                     ((uint32_t)0x00000004)             /*!< Bit 1 */
+
+#define  LPTIM_CFGR_CKFLT                       ((uint32_t)0x00000018)             /*!< CKFLT[1:0] bits (Configurable digital filter for external clock) */
+#define  LPTIM_CFGR_CKFLT_0                     ((uint32_t)0x00000008)             /*!< Bit 0 */
+#define  LPTIM_CFGR_CKFLT_1                     ((uint32_t)0x00000010)             /*!< Bit 1 */
+
+#define  LPTIM_CFGR_TRGFLT                      ((uint32_t)0x000000C0)             /*!< TRGFLT[1:0] bits (Configurable digital filter for trigger) */
+#define  LPTIM_CFGR_TRGFLT_0                    ((uint32_t)0x00000040)             /*!< Bit 0 */
+#define  LPTIM_CFGR_TRGFLT_1                    ((uint32_t)0x00000080)             /*!< Bit 1 */
+
+#define  LPTIM_CFGR_PRESC                       ((uint32_t)0x00000E00)             /*!< PRESC[2:0] bits (Clock prescaler) */
+#define  LPTIM_CFGR_PRESC_0                     ((uint32_t)0x00000200)             /*!< Bit 0 */
+#define  LPTIM_CFGR_PRESC_1                     ((uint32_t)0x00000400)             /*!< Bit 1 */
+#define  LPTIM_CFGR_PRESC_2                     ((uint32_t)0x00000800)             /*!< Bit 2 */
+
+#define  LPTIM_CFGR_TRIGSEL                     ((uint32_t)0x0000E000)             /*!< TRIGSEL[2:0]] bits (Trigger selector) */
+#define  LPTIM_CFGR_TRIGSEL_0                   ((uint32_t)0x00002000)             /*!< Bit 0 */
+#define  LPTIM_CFGR_TRIGSEL_1                   ((uint32_t)0x00004000)             /*!< Bit 1 */
+#define  LPTIM_CFGR_TRIGSEL_2                   ((uint32_t)0x00008000)             /*!< Bit 2 */
+
+#define  LPTIM_CFGR_TRIGEN                      ((uint32_t)0x00060000)             /*!< TRIGEN[1:0] bits (Trigger enable and polarity) */
+#define  LPTIM_CFGR_TRIGEN_0                    ((uint32_t)0x00020000)             /*!< Bit 0 */
+#define  LPTIM_CFGR_TRIGEN_1                    ((uint32_t)0x00040000)             /*!< Bit 1 */
+
+#define  LPTIM_CFGR_TIMOUT                      ((uint32_t)0x00080000)             /*!< Timout enable           */
+#define  LPTIM_CFGR_WAVE                        ((uint32_t)0x00100000)             /*!< Waveform shape          */
+#define  LPTIM_CFGR_WAVPOL                      ((uint32_t)0x00200000)             /*!< Waveform shape polarity */
+#define  LPTIM_CFGR_PRELOAD                     ((uint32_t)0x00400000)             /*!< Reg update mode         */
+#define  LPTIM_CFGR_COUNTMODE                   ((uint32_t)0x00800000)             /*!< Counter mode enable     */     
+#define  LPTIM_CFGR_ENC                         ((uint32_t)0x01000000)             /*!< Encoder mode enable     */          
+
+/******************  Bit definition for LPTIM_CR register  ********************/
+#define  LPTIM_CR_ENABLE                        ((uint32_t)0x00000001)             /*!< LPTIMer enable                 */
+#define  LPTIM_CR_SNGSTRT                       ((uint32_t)0x00080002)             /*!< Timer start in single mode     */
+#define  LPTIM_CR_CNTSTRT                       ((uint32_t)0x00000004)             /*!< Timer start in continuous mode */
+
+/******************  Bit definition for LPTIM_CMP register  *******************/
+#define  LPTIM_CMP_CMP                          ((uint32_t)0x0000FFFF)             /*!< Compare register     */
+
+/******************  Bit definition for LPTIM_ARR register  *******************/
+#define  LPTIM_ARR_ARR                          ((uint32_t)0x0000FFFF)             /*!< Auto reload register */
+
+/******************  Bit definition for LPTIM_CNT register  *******************/
+#define  LPTIM_CNT_CNT                          ((uint32_t)0x0000FFFF)             /*!< Counter register     */
+/******************************************************************************/
+/*                                                                            */
+/*      Universal Synchronous Asynchronous Receiver Transmitter (USART)       */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for USART_CR1 register  *******************/
+#define  USART_CR1_UE                        ((uint32_t)0x00000001)            /*!< USART Enable                                    */
+#define  USART_CR1_RE                        ((uint32_t)0x00000004)            /*!< Receiver Enable                                 */
+#define  USART_CR1_TE                        ((uint32_t)0x00000008)            /*!< Transmitter Enable                              */
+#define  USART_CR1_IDLEIE                    ((uint32_t)0x00000010)            /*!< IDLE Interrupt Enable                           */
+#define  USART_CR1_RXNEIE                    ((uint32_t)0x00000020)            /*!< RXNE Interrupt Enable                           */
+#define  USART_CR1_TCIE                      ((uint32_t)0x00000040)            /*!< Transmission Complete Interrupt Enable          */
+#define  USART_CR1_TXEIE                     ((uint32_t)0x00000080)            /*!< TXE Interrupt Enable                            */
+#define  USART_CR1_PEIE                      ((uint32_t)0x00000100)            /*!< PE Interrupt Enable                             */
+#define  USART_CR1_PS                        ((uint32_t)0x00000200)            /*!< Parity Selection                                */
+#define  USART_CR1_PCE                       ((uint32_t)0x00000400)            /*!< Parity Control Enable                           */
+#define  USART_CR1_WAKE                      ((uint32_t)0x00000800)            /*!< Receiver Wakeup method                          */
+#define  USART_CR1_M                         ((uint32_t)0x10001000)            /*!< Word length                                     */
+#define  USART_CR1_M_0                       ((uint32_t)0x00001000)            /*!< Word length - Bit 0                             */
+#define  USART_CR1_MME                       ((uint32_t)0x00002000)            /*!< Mute Mode Enable                                */
+#define  USART_CR1_CMIE                      ((uint32_t)0x00004000)            /*!< Character match interrupt enable                */
+#define  USART_CR1_OVER8                     ((uint32_t)0x00008000)            /*!< Oversampling by 8-bit or 16-bit mode            */
+#define  USART_CR1_DEDT                      ((uint32_t)0x001F0000)            /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define  USART_CR1_DEDT_0                    ((uint32_t)0x00010000)            /*!< Bit 0 */
+#define  USART_CR1_DEDT_1                    ((uint32_t)0x00020000)            /*!< Bit 1 */
+#define  USART_CR1_DEDT_2                    ((uint32_t)0x00040000)            /*!< Bit 2 */
+#define  USART_CR1_DEDT_3                    ((uint32_t)0x00080000)            /*!< Bit 3 */
+#define  USART_CR1_DEDT_4                    ((uint32_t)0x00100000)            /*!< Bit 4 */
+#define  USART_CR1_DEAT                      ((uint32_t)0x03E00000)            /*!< DEAT[4:0] bits (Driver Enable Assertion Time)   */
+#define  USART_CR1_DEAT_0                    ((uint32_t)0x00200000)            /*!< Bit 0 */
+#define  USART_CR1_DEAT_1                    ((uint32_t)0x00400000)            /*!< Bit 1 */
+#define  USART_CR1_DEAT_2                    ((uint32_t)0x00800000)            /*!< Bit 2 */
+#define  USART_CR1_DEAT_3                    ((uint32_t)0x01000000)            /*!< Bit 3 */
+#define  USART_CR1_DEAT_4                    ((uint32_t)0x02000000)            /*!< Bit 4 */
+#define  USART_CR1_RTOIE                     ((uint32_t)0x04000000)            /*!< Receive Time Out interrupt enable */
+#define  USART_CR1_EOBIE                     ((uint32_t)0x08000000)            /*!< End of Block interrupt enable     */
+#define  USART_CR1_M_1                       ((uint32_t)0x10000000)            /*!< Word length - Bit 1               */
+
+/******************  Bit definition for USART_CR2 register  *******************/
+#define  USART_CR2_ADDM7                     ((uint32_t)0x00000010)            /*!< 7-bit or 4-bit Address Detection       */
+#define  USART_CR2_LBDL                      ((uint32_t)0x00000020)            /*!< LIN Break Detection Length             */
+#define  USART_CR2_LBDIE                     ((uint32_t)0x00000040)            /*!< LIN Break Detection Interrupt Enable   */
+#define  USART_CR2_LBCL                      ((uint32_t)0x00000100)            /*!< Last Bit Clock pulse                   */
+#define  USART_CR2_CPHA                      ((uint32_t)0x00000200)            /*!< Clock Phase                            */
+#define  USART_CR2_CPOL                      ((uint32_t)0x00000400)            /*!< Clock Polarity                         */
+#define  USART_CR2_CLKEN                     ((uint32_t)0x00000800)            /*!< Clock Enable                           */
+#define  USART_CR2_STOP                      ((uint32_t)0x00003000)            /*!< STOP[1:0] bits (STOP bits)             */
+#define  USART_CR2_STOP_0                    ((uint32_t)0x00001000)            /*!< Bit 0 */
+#define  USART_CR2_STOP_1                    ((uint32_t)0x00002000)            /*!< Bit 1 */
+#define  USART_CR2_LINEN                     ((uint32_t)0x00004000)            /*!< LIN mode enable                        */
+#define  USART_CR2_SWAP                      ((uint32_t)0x00008000)            /*!< SWAP TX/RX pins                        */
+#define  USART_CR2_RXINV                     ((uint32_t)0x00010000)            /*!< RX pin active level inversion          */
+#define  USART_CR2_TXINV                     ((uint32_t)0x00020000)            /*!< TX pin active level inversion          */
+#define  USART_CR2_DATAINV                   ((uint32_t)0x00040000)            /*!< Binary data inversion                  */
+#define  USART_CR2_MSBFIRST                  ((uint32_t)0x00080000)            /*!< Most Significant Bit First             */
+#define  USART_CR2_ABREN                     ((uint32_t)0x00100000)            /*!< Auto Baud-Rate Enable                  */
+#define  USART_CR2_ABRMODE                   ((uint32_t)0x00600000)            /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define  USART_CR2_ABRMODE_0                 ((uint32_t)0x00200000)            /*!< Bit 0 */
+#define  USART_CR2_ABRMODE_1                 ((uint32_t)0x00400000)            /*!< Bit 1 */
+#define  USART_CR2_RTOEN                     ((uint32_t)0x00800000)            /*!< Receiver Time-Out enable  */
+#define  USART_CR2_ADD                       ((uint32_t)0xFF000000)            /*!< Address of the USART node */
+
+/******************  Bit definition for USART_CR3 register  *******************/
+#define  USART_CR3_EIE                       ((uint32_t)0x00000001)            /*!< Error Interrupt Enable                         */
+#define  USART_CR3_IREN                      ((uint32_t)0x00000002)            /*!< IrDA mode Enable                               */
+#define  USART_CR3_IRLP                      ((uint32_t)0x00000004)            /*!< IrDA Low-Power                                 */
+#define  USART_CR3_HDSEL                     ((uint32_t)0x00000008)            /*!< Half-Duplex Selection                          */
+#define  USART_CR3_NACK                      ((uint32_t)0x00000010)            /*!< SmartCard NACK enable                          */
+#define  USART_CR3_SCEN                      ((uint32_t)0x00000020)            /*!< SmartCard mode enable                          */
+#define  USART_CR3_DMAR                      ((uint32_t)0x00000040)            /*!< DMA Enable Receiver                            */
+#define  USART_CR3_DMAT                      ((uint32_t)0x00000080)            /*!< DMA Enable Transmitter                         */
+#define  USART_CR3_RTSE                      ((uint32_t)0x00000100)            /*!< RTS Enable                                     */
+#define  USART_CR3_CTSE                      ((uint32_t)0x00000200)            /*!< CTS Enable                                     */
+#define  USART_CR3_CTSIE                     ((uint32_t)0x00000400)            /*!< CTS Interrupt Enable                           */
+#define  USART_CR3_ONEBIT                    ((uint32_t)0x00000800)            /*!< One sample bit method enable                   */
+#define  USART_CR3_OVRDIS                    ((uint32_t)0x00001000)            /*!< Overrun Disable                                */
+#define  USART_CR3_DDRE                      ((uint32_t)0x00002000)            /*!< DMA Disable on Reception Error                 */
+#define  USART_CR3_DEM                       ((uint32_t)0x00004000)            /*!< Driver Enable Mode                             */
+#define  USART_CR3_DEP                       ((uint32_t)0x00008000)            /*!< Driver Enable Polarity Selection               */
+#define  USART_CR3_SCARCNT                   ((uint32_t)0x000E0000)            /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define  USART_CR3_SCARCNT_0                 ((uint32_t)0x00020000)            /*!< Bit 0 */
+#define  USART_CR3_SCARCNT_1                 ((uint32_t)0x00040000)            /*!< Bit 1 */
+#define  USART_CR3_SCARCNT_2                 ((uint32_t)0x00080000)            /*!< Bit 2 */
+
+
+/******************  Bit definition for USART_BRR register  *******************/
+#define  USART_BRR_DIV_FRACTION              ((uint32_t)0x000F)                /*!< Fraction of USARTDIV */
+#define  USART_BRR_DIV_MANTISSA              ((uint32_t)0xFFF0)                /*!< Mantissa of USARTDIV */
+
+/******************  Bit definition for USART_GTPR register  ******************/
+#define  USART_GTPR_PSC                      ((uint32_t)0x00FF)                /*!< PSC[7:0] bits (Prescaler value) */
+#define  USART_GTPR_GT                       ((uint32_t)0xFF00)                /*!< GT[7:0] bits (Guard time value) */
+
+
+/*******************  Bit definition for USART_RTOR register  *****************/
+#define  USART_RTOR_RTO                      ((uint32_t)0x00FFFFFF)            /*!< Receiver Time Out Value */
+#define  USART_RTOR_BLEN                     ((uint32_t)0xFF000000)            /*!< Block Length */
+
+/*******************  Bit definition for USART_RQR register  ******************/
+#define  USART_RQR_ABRRQ                     ((uint32_t)0x0001)                /*!< Auto-Baud Rate Request      */
+#define  USART_RQR_SBKRQ                     ((uint32_t)0x0002)                /*!< Send Break Request          */
+#define  USART_RQR_MMRQ                      ((uint32_t)0x0004)                /*!< Mute Mode Request           */
+#define  USART_RQR_RXFRQ                     ((uint32_t)0x0008)                /*!< Receive Data flush Request  */
+#define  USART_RQR_TXFRQ                     ((uint32_t)0x0010)                /*!< Transmit data flush Request */
+
+/*******************  Bit definition for USART_ISR register  ******************/
+#define  USART_ISR_PE                        ((uint32_t)0x00000001)            /*!< Parity Error                        */
+#define  USART_ISR_FE                        ((uint32_t)0x00000002)            /*!< Framing Error                       */
+#define  USART_ISR_NE                        ((uint32_t)0x00000004)            /*!< Noise detected Flag                 */
+#define  USART_ISR_ORE                       ((uint32_t)0x00000008)            /*!< OverRun Error                       */
+#define  USART_ISR_IDLE                      ((uint32_t)0x00000010)            /*!< IDLE line detected                  */
+#define  USART_ISR_RXNE                      ((uint32_t)0x00000020)            /*!< Read Data Register Not Empty        */
+#define  USART_ISR_TC                        ((uint32_t)0x00000040)            /*!< Transmission Complete               */
+#define  USART_ISR_TXE                       ((uint32_t)0x00000080)            /*!< Transmit Data Register Empty        */
+#define  USART_ISR_LBD                       ((uint32_t)0x00000100)            /*!< LIN Break Detection Flag            */
+#define  USART_ISR_CTSIF                     ((uint32_t)0x00000200)            /*!< CTS interrupt flag                  */
+#define  USART_ISR_CTS                       ((uint32_t)0x00000400)            /*!< CTS flag                            */
+#define  USART_ISR_RTOF                      ((uint32_t)0x00000800)            /*!< Receiver Time Out                   */
+#define  USART_ISR_EOBF                      ((uint32_t)0x00001000)            /*!< End Of Block Flag                   */
+#define  USART_ISR_ABRE                      ((uint32_t)0x00004000)            /*!< Auto-Baud Rate Error                */
+#define  USART_ISR_ABRF                      ((uint32_t)0x00008000)            /*!< Auto-Baud Rate Flag                 */
+#define  USART_ISR_BUSY                      ((uint32_t)0x00010000)            /*!< Busy Flag                           */
+#define  USART_ISR_CMF                       ((uint32_t)0x00020000)            /*!< Character Match Flag                */
+#define  USART_ISR_SBKF                      ((uint32_t)0x00040000)            /*!< Send Break Flag                     */
+#define  USART_ISR_RWU                       ((uint32_t)0x00080000)            /*!< Receive Wake Up from mute mode Flag */
+#define  USART_ISR_WUF                       ((uint32_t)0x00100000)            /*!< Wake Up from stop mode Flag         */
+#define  USART_ISR_TEACK                     ((uint32_t)0x00200000)            /*!< Transmit Enable Acknowledge Flag    */
+#define  USART_ISR_REACK                     ((uint32_t)0x00400000)            /*!< Receive Enable Acknowledge Flag     */
+
+/*******************  Bit definition for USART_ICR register  ******************/
+#define  USART_ICR_PECF                      ((uint32_t)0x00000001)            /*!< Parity Error Clear Flag             */
+#define  USART_ICR_FECF                      ((uint32_t)0x00000002)            /*!< Framing Error Clear Flag            */
+#define  USART_ICR_NCF                       ((uint32_t)0x00000004)            /*!< Noise detected Clear Flag           */
+#define  USART_ICR_ORECF                     ((uint32_t)0x00000008)            /*!< OverRun Error Clear Flag            */
+#define  USART_ICR_IDLECF                    ((uint32_t)0x00000010)            /*!< IDLE line detected Clear Flag       */
+#define  USART_ICR_TCCF                      ((uint32_t)0x00000040)            /*!< Transmission Complete Clear Flag    */
+#define  USART_ICR_LBDCF                     ((uint32_t)0x00000100)            /*!< LIN Break Detection Clear Flag      */
+#define  USART_ICR_CTSCF                     ((uint32_t)0x00000200)            /*!< CTS Interrupt Clear Flag            */
+#define  USART_ICR_RTOCF                     ((uint32_t)0x00000800)            /*!< Receiver Time Out Clear Flag        */
+#define  USART_ICR_EOBCF                     ((uint32_t)0x00001000)            /*!< End Of Block Clear Flag             */
+#define  USART_ICR_CMCF                      ((uint32_t)0x00020000)            /*!< Character Match Clear Flag          */
+#define  USART_ICR_WUCF                      ((uint32_t)0x00100000)            /*!< Wake Up from stop mode Clear Flag   */
+
+/*******************  Bit definition for USART_RDR register  ******************/
+#define  USART_RDR_RDR                       ((uint32_t)0x01FF)                /*!< RDR[8:0] bits (Receive Data value) */
+
+/*******************  Bit definition for USART_TDR register  ******************/
+#define  USART_TDR_TDR                       ((uint32_t)0x01FF)                /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/*                                                                            */
+/*                            Window WATCHDOG                                 */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for WWDG_CR register  ********************/
+#define  WWDG_CR_T                            ((uint32_t)0x7F)                 /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define  WWDG_CR_T_0                          ((uint32_t)0x01)                 /*!<Bit 0 */
+#define  WWDG_CR_T_1                          ((uint32_t)0x02)                 /*!<Bit 1 */
+#define  WWDG_CR_T_2                          ((uint32_t)0x04)                 /*!<Bit 2 */
+#define  WWDG_CR_T_3                          ((uint32_t)0x08)                 /*!<Bit 3 */
+#define  WWDG_CR_T_4                          ((uint32_t)0x10)                 /*!<Bit 4 */
+#define  WWDG_CR_T_5                          ((uint32_t)0x20)                 /*!<Bit 5 */
+#define  WWDG_CR_T_6                          ((uint32_t)0x40)                 /*!<Bit 6 */
+
+/* Legacy defines */
+#define  WWDG_CR_T0                           WWDG_CR_T_0                      /*!<Bit 0 */
+#define  WWDG_CR_T1                           WWDG_CR_T_1                      /*!<Bit 1 */
+#define  WWDG_CR_T2                           WWDG_CR_T_2                      /*!<Bit 2 */
+#define  WWDG_CR_T3                           WWDG_CR_T_3                      /*!<Bit 3 */
+#define  WWDG_CR_T4                           WWDG_CR_T_4                      /*!<Bit 4 */
+#define  WWDG_CR_T5                           WWDG_CR_T_5                      /*!<Bit 5 */
+#define  WWDG_CR_T6                           WWDG_CR_T_6                      /*!<Bit 6 */
+
+#define  WWDG_CR_WDGA                        ((uint32_t)0x80)                  /*!<Activation bit */
+
+/*******************  Bit definition for WWDG_CFR register  *******************/
+#define  WWDG_CFR_W                          ((uint32_t)0x007F)                /*!<W[6:0] bits (7-bit window value) */
+#define  WWDG_CFR_W_0                        ((uint32_t)0x0001)                /*!<Bit 0 */
+#define  WWDG_CFR_W_1                        ((uint32_t)0x0002)                /*!<Bit 1 */
+#define  WWDG_CFR_W_2                        ((uint32_t)0x0004)                /*!<Bit 2 */
+#define  WWDG_CFR_W_3                        ((uint32_t)0x0008)                /*!<Bit 3 */
+#define  WWDG_CFR_W_4                        ((uint32_t)0x0010)                /*!<Bit 4 */
+#define  WWDG_CFR_W_5                        ((uint32_t)0x0020)                /*!<Bit 5 */
+#define  WWDG_CFR_W_6                        ((uint32_t)0x0040)                /*!<Bit 6 */
+
+/* Legacy defines */
+#define  WWDG_CFR_W0                         WWDG_CFR_W_0                      /*!<Bit 0 */
+#define  WWDG_CFR_W1                         WWDG_CFR_W_1                      /*!<Bit 1 */
+#define  WWDG_CFR_W2                         WWDG_CFR_W_2                      /*!<Bit 2 */
+#define  WWDG_CFR_W3                         WWDG_CFR_W_3                      /*!<Bit 3 */
+#define  WWDG_CFR_W4                         WWDG_CFR_W_4                      /*!<Bit 4 */
+#define  WWDG_CFR_W5                         WWDG_CFR_W_5                      /*!<Bit 5 */
+#define  WWDG_CFR_W6                         WWDG_CFR_W_6                      /*!<Bit 6 */
+
+#define  WWDG_CFR_WDGTB                      ((uint32_t)0x0180)                /*!<WDGTB[1:0] bits (Timer Base) */
+#define  WWDG_CFR_WDGTB_0                    ((uint32_t)0x0080)                /*!<Bit 0 */
+#define  WWDG_CFR_WDGTB_1                    ((uint32_t)0x0100)                /*!<Bit 1 */
+
+/* Legacy defines */
+#define  WWDG_CFR_WDGTB0                     WWDG_CFR_WDGTB_0                  /*!<Bit 0 */
+#define  WWDG_CFR_WDGTB1                     WWDG_CFR_WDGTB_1                  /*!<Bit 1 */
+
+#define  WWDG_CFR_EWI                        ((uint32_t)0x0200)               /*!<Early Wakeup Interrupt */
+
+/*******************  Bit definition for WWDG_SR register  ********************/
+#define  WWDG_SR_EWIF                        ((uint32_t)0x01)                  /*!<Early Wakeup Interrupt Flag */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                DBG                                         */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for DBGMCU_IDCODE register  *************/
+#define  DBGMCU_IDCODE_DEV_ID                ((uint32_t)0x00000FFF)
+#define  DBGMCU_IDCODE_REV_ID                ((uint32_t)0xFFFF0000)
+
+/********************  Bit definition for DBGMCU_CR register  *****************/
+#define  DBGMCU_CR_DBG_SLEEP                 ((uint32_t)0x00000001)
+#define  DBGMCU_CR_DBG_STOP                  ((uint32_t)0x00000002)
+#define  DBGMCU_CR_DBG_STANDBY               ((uint32_t)0x00000004)
+#define  DBGMCU_CR_TRACE_IOEN                ((uint32_t)0x00000020)
+
+#define  DBGMCU_CR_TRACE_MODE                ((uint32_t)0x000000C0)
+#define  DBGMCU_CR_TRACE_MODE_0              ((uint32_t)0x00000040) /*!<Bit 0 */
+#define  DBGMCU_CR_TRACE_MODE_1              ((uint32_t)0x00000080) /*!<Bit 1 */
+
+/********************  Bit definition for DBGMCU_APB1_FZ register  ************/
+#define  DBGMCU_APB1_FZ_DBG_TIM2_STOP            ((uint32_t)0x00000001)
+#define  DBGMCU_APB1_FZ_DBG_TIM3_STOP            ((uint32_t)0x00000002)
+#define  DBGMCU_APB1_FZ_DBG_TIM4_STOP            ((uint32_t)0x00000004)
+#define  DBGMCU_APB1_FZ_DBG_TIM5_STOP            ((uint32_t)0x00000008)
+#define  DBGMCU_APB1_FZ_DBG_TIM6_STOP            ((uint32_t)0x00000010)
+#define  DBGMCU_APB1_FZ_DBG_TIM7_STOP            ((uint32_t)0x00000020)
+#define  DBGMCU_APB1_FZ_DBG_TIM12_STOP           ((uint32_t)0x00000040)
+#define  DBGMCU_APB1_FZ_DBG_TIM13_STOP           ((uint32_t)0x00000080)
+#define  DBGMCU_APB1_FZ_DBG_TIM14_STOP           ((uint32_t)0x00000100)
+#define  DBGMCU_APB1_FZ_DBG_RTC_STOP             ((uint32_t)0x00000400)
+#define  DBGMCU_APB1_FZ_DBG_WWDG_STOP            ((uint32_t)0x00000800)
+#define  DBGMCU_APB1_FZ_DBG_IWDG_STOP            ((uint32_t)0x00001000)
+#define  DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT   ((uint32_t)0x00200000)
+#define  DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT   ((uint32_t)0x00400000)
+#define  DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT   ((uint32_t)0x00800000)
+#define  DBGMCU_APB1_FZ_DBG_CAN1_STOP            ((uint32_t)0x02000000)
+#define  DBGMCU_APB1_FZ_DBG_CAN2_STOP            ((uint32_t)0x04000000)
+
+/********************  Bit definition for DBGMCU_APB2_FZ register  ************/
+#define  DBGMCU_APB1_FZ_DBG_TIM1_STOP        ((uint32_t)0x00000001)
+#define  DBGMCU_APB1_FZ_DBG_TIM8_STOP        ((uint32_t)0x00000002)
+#define  DBGMCU_APB1_FZ_DBG_TIM9_STOP        ((uint32_t)0x00010000)
+#define  DBGMCU_APB1_FZ_DBG_TIM10_STOP       ((uint32_t)0x00020000)
+#define  DBGMCU_APB1_FZ_DBG_TIM11_STOP       ((uint32_t)0x00040000)
+
+/******************************************************************************/
+/*                                                                            */
+/*                Ethernet MAC Registers bits definitions                     */
+/*                                                                            */
+/******************************************************************************/
+/* Bit definition for Ethernet MAC Control Register register */
+#define ETH_MACCR_WD      ((uint32_t)0x00800000)  /* Watchdog disable */
+#define ETH_MACCR_JD      ((uint32_t)0x00400000)  /* Jabber disable */
+#define ETH_MACCR_IFG     ((uint32_t)0x000E0000)  /* Inter-frame gap */
+#define ETH_MACCR_IFG_96Bit     ((uint32_t)0x00000000)  /* Minimum IFG between frames during transmission is 96Bit */
+  #define ETH_MACCR_IFG_88Bit     ((uint32_t)0x00020000)  /* Minimum IFG between frames during transmission is 88Bit */
+  #define ETH_MACCR_IFG_80Bit     ((uint32_t)0x00040000)  /* Minimum IFG between frames during transmission is 80Bit */
+  #define ETH_MACCR_IFG_72Bit     ((uint32_t)0x00060000)  /* Minimum IFG between frames during transmission is 72Bit */
+  #define ETH_MACCR_IFG_64Bit     ((uint32_t)0x00080000)  /* Minimum IFG between frames during transmission is 64Bit */        
+  #define ETH_MACCR_IFG_56Bit     ((uint32_t)0x000A0000)  /* Minimum IFG between frames during transmission is 56Bit */
+  #define ETH_MACCR_IFG_48Bit     ((uint32_t)0x000C0000)  /* Minimum IFG between frames during transmission is 48Bit */
+  #define ETH_MACCR_IFG_40Bit     ((uint32_t)0x000E0000)  /* Minimum IFG between frames during transmission is 40Bit */              
+#define ETH_MACCR_CSD     ((uint32_t)0x00010000)  /* Carrier sense disable (during transmission) */
+#define ETH_MACCR_FES     ((uint32_t)0x00004000)  /* Fast ethernet speed */
+#define ETH_MACCR_ROD     ((uint32_t)0x00002000)  /* Receive own disable */
+#define ETH_MACCR_LM      ((uint32_t)0x00001000)  /* loopback mode */
+#define ETH_MACCR_DM      ((uint32_t)0x00000800)  /* Duplex mode */
+#define ETH_MACCR_IPCO    ((uint32_t)0x00000400)  /* IP Checksum offload */
+#define ETH_MACCR_RD      ((uint32_t)0x00000200)  /* Retry disable */
+#define ETH_MACCR_APCS    ((uint32_t)0x00000080)  /* Automatic Pad/CRC stripping */
+#define ETH_MACCR_BL      ((uint32_t)0x00000060)  /* Back-off limit: random integer number (r) of slot time delays before rescheduling
+                                                       a transmission attempt during retries after a collision: 0 =< r <2^k */
+  #define ETH_MACCR_BL_10    ((uint32_t)0x00000000)  /* k = min (n, 10) */
+  #define ETH_MACCR_BL_8     ((uint32_t)0x00000020)  /* k = min (n, 8) */
+  #define ETH_MACCR_BL_4     ((uint32_t)0x00000040)  /* k = min (n, 4) */
+  #define ETH_MACCR_BL_1     ((uint32_t)0x00000060)  /* k = min (n, 1) */ 
+#define ETH_MACCR_DC      ((uint32_t)0x00000010)  /* Defferal check */
+#define ETH_MACCR_TE      ((uint32_t)0x00000008)  /* Transmitter enable */
+#define ETH_MACCR_RE      ((uint32_t)0x00000004)  /* Receiver enable */
+
+/* Bit definition for Ethernet MAC Frame Filter Register */
+#define ETH_MACFFR_RA     ((uint32_t)0x80000000)  /* Receive all */ 
+#define ETH_MACFFR_HPF    ((uint32_t)0x00000400)  /* Hash or perfect filter */ 
+#define ETH_MACFFR_SAF    ((uint32_t)0x00000200)  /* Source address filter enable */ 
+#define ETH_MACFFR_SAIF   ((uint32_t)0x00000100)  /* SA inverse filtering */ 
+#define ETH_MACFFR_PCF    ((uint32_t)0x000000C0)  /* Pass control frames: 3 cases */
+  #define ETH_MACFFR_PCF_BlockAll                ((uint32_t)0x00000040)  /* MAC filters all control frames from reaching the application */
+  #define ETH_MACFFR_PCF_ForwardAll              ((uint32_t)0x00000080)  /* MAC forwards all control frames to application even if they fail the Address Filter */
+  #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0)  /* MAC forwards control frames that pass the Address Filter. */ 
+#define ETH_MACFFR_BFD    ((uint32_t)0x00000020)  /* Broadcast frame disable */ 
+#define ETH_MACFFR_PAM    ((uint32_t)0x00000010)  /* Pass all mutlicast */ 
+#define ETH_MACFFR_DAIF   ((uint32_t)0x00000008)  /* DA Inverse filtering */ 
+#define ETH_MACFFR_HM     ((uint32_t)0x00000004)  /* Hash multicast */ 
+#define ETH_MACFFR_HU     ((uint32_t)0x00000002)  /* Hash unicast */
+#define ETH_MACFFR_PM     ((uint32_t)0x00000001)  /* Promiscuous mode */
+
+/* Bit definition for Ethernet MAC Hash Table High Register */
+#define ETH_MACHTHR_HTH   ((uint32_t)0xFFFFFFFF)  /* Hash table high */
+
+/* Bit definition for Ethernet MAC Hash Table Low Register */
+#define ETH_MACHTLR_HTL   ((uint32_t)0xFFFFFFFF)  /* Hash table low */
+
+/* Bit definition for Ethernet MAC MII Address Register */
+#define ETH_MACMIIAR_PA   ((uint32_t)0x0000F800)  /* Physical layer address */ 
+#define ETH_MACMIIAR_MR   ((uint32_t)0x000007C0)  /* MII register in the selected PHY */ 
+#define ETH_MACMIIAR_CR   ((uint32_t)0x0000001C)  /* CR clock range: 6 cases */ 
+  #define ETH_MACMIIAR_CR_Div42   ((uint32_t)0x00000000)  /* HCLK:60-100 MHz; MDC clock= HCLK/42 */
+  #define ETH_MACMIIAR_CR_Div62   ((uint32_t)0x00000004)  /* HCLK:100-150 MHz; MDC clock= HCLK/62 */
+  #define ETH_MACMIIAR_CR_Div16   ((uint32_t)0x00000008)  /* HCLK:20-35 MHz; MDC clock= HCLK/16 */
+  #define ETH_MACMIIAR_CR_Div26   ((uint32_t)0x0000000C)  /* HCLK:35-60 MHz; MDC clock= HCLK/26 */
+  #define ETH_MACMIIAR_CR_Div102  ((uint32_t)0x00000010)  /* HCLK:150-168 MHz; MDC clock= HCLK/102 */  
+#define ETH_MACMIIAR_MW   ((uint32_t)0x00000002)  /* MII write */ 
+#define ETH_MACMIIAR_MB   ((uint32_t)0x00000001)  /* MII busy */ 
+  
+/* Bit definition for Ethernet MAC MII Data Register */
+#define ETH_MACMIIDR_MD   ((uint32_t)0x0000FFFF)  /* MII data: read/write data from/to PHY */
+
+/* Bit definition for Ethernet MAC Flow Control Register */
+#define ETH_MACFCR_PT     ((uint32_t)0xFFFF0000)  /* Pause time */
+#define ETH_MACFCR_ZQPD   ((uint32_t)0x00000080)  /* Zero-quanta pause disable */
+#define ETH_MACFCR_PLT    ((uint32_t)0x00000030)  /* Pause low threshold: 4 cases */
+  #define ETH_MACFCR_PLT_Minus4   ((uint32_t)0x00000000)  /* Pause time minus 4 slot times */
+  #define ETH_MACFCR_PLT_Minus28  ((uint32_t)0x00000010)  /* Pause time minus 28 slot times */
+  #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020)  /* Pause time minus 144 slot times */
+  #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030)  /* Pause time minus 256 slot times */      
+#define ETH_MACFCR_UPFD   ((uint32_t)0x00000008)  /* Unicast pause frame detect */
+#define ETH_MACFCR_RFCE   ((uint32_t)0x00000004)  /* Receive flow control enable */
+#define ETH_MACFCR_TFCE   ((uint32_t)0x00000002)  /* Transmit flow control enable */
+#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001)  /* Flow control busy/backpressure activate */
+
+/* Bit definition for Ethernet MAC VLAN Tag Register */
+#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000)  /* 12-bit VLAN tag comparison */
+#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF)  /* VLAN tag identifier (for receive frames) */
+
+/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */ 
+#define ETH_MACRWUFFR_D   ((uint32_t)0xFFFFFFFF)  /* Wake-up frame filter register data */
+/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers.
+   Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */
+/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask
+   Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask
+   Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask
+   Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask
+   Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command - 
+                              RSVD - Filter1 Command - RSVD - Filter0 Command
+   Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset
+   Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16
+   Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */
+
+/* Bit definition for Ethernet MAC PMT Control and Status Register */ 
+#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000)  /* Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_MACPMTCSR_GU     ((uint32_t)0x00000200)  /* Global Unicast */
+#define ETH_MACPMTCSR_WFR    ((uint32_t)0x00000040)  /* Wake-Up Frame Received */
+#define ETH_MACPMTCSR_MPR    ((uint32_t)0x00000020)  /* Magic Packet Received */
+#define ETH_MACPMTCSR_WFE    ((uint32_t)0x00000004)  /* Wake-Up Frame Enable */
+#define ETH_MACPMTCSR_MPE    ((uint32_t)0x00000002)  /* Magic Packet Enable */
+#define ETH_MACPMTCSR_PD     ((uint32_t)0x00000001)  /* Power Down */
+
+/* Bit definition for Ethernet MAC Status Register */
+#define ETH_MACSR_TSTS      ((uint32_t)0x00000200)  /* Time stamp trigger status */
+#define ETH_MACSR_MMCTS     ((uint32_t)0x00000040)  /* MMC transmit status */
+#define ETH_MACSR_MMMCRS    ((uint32_t)0x00000020)  /* MMC receive status */
+#define ETH_MACSR_MMCS      ((uint32_t)0x00000010)  /* MMC status */
+#define ETH_MACSR_PMTS      ((uint32_t)0x00000008)  /* PMT status */
+
+/* Bit definition for Ethernet MAC Interrupt Mask Register */
+#define ETH_MACIMR_TSTIM     ((uint32_t)0x00000200)  /* Time stamp trigger interrupt mask */
+#define ETH_MACIMR_PMTIM     ((uint32_t)0x00000008)  /* PMT interrupt mask */
+
+/* Bit definition for Ethernet MAC Address0 High Register */
+#define ETH_MACA0HR_MACA0H   ((uint32_t)0x0000FFFF)  /* MAC address0 high */
+
+/* Bit definition for Ethernet MAC Address0 Low Register */
+#define ETH_MACA0LR_MACA0L   ((uint32_t)0xFFFFFFFF)  /* MAC address0 low */
+
+/* Bit definition for Ethernet MAC Address1 High Register */
+#define ETH_MACA1HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA1HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA1HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control: bits to mask for comparison of the MAC Address bytes */
+  #define ETH_MACA1HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA1HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA1HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA1HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA1HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA1HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [7:0] */ 
+#define ETH_MACA1HR_MACA1H   ((uint32_t)0x0000FFFF)  /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address1 Low Register */
+#define ETH_MACA1LR_MACA1L   ((uint32_t)0xFFFFFFFF)  /* MAC address1 low */
+
+/* Bit definition for Ethernet MAC Address2 High Register */
+#define ETH_MACA2HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA2HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA2HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control */
+  #define ETH_MACA2HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA2HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA2HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA2HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA2HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA2HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA2HR_MACA2H   ((uint32_t)0x0000FFFF)  /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address2 Low Register */
+#define ETH_MACA2LR_MACA2L   ((uint32_t)0xFFFFFFFF)  /* MAC address2 low */
+
+/* Bit definition for Ethernet MAC Address3 High Register */
+#define ETH_MACA3HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA3HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA3HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control */
+  #define ETH_MACA3HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA3HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA3HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA3HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA3HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA3HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA3HR_MACA3H   ((uint32_t)0x0000FFFF)  /* MAC address3 high */
+
+/* Bit definition for Ethernet MAC Address3 Low Register */
+#define ETH_MACA3LR_MACA3L   ((uint32_t)0xFFFFFFFF)  /* MAC address3 low */
+
+/******************************************************************************/
+/*                Ethernet MMC Registers bits definition                      */
+/******************************************************************************/
+
+/* Bit definition for Ethernet MMC Contol Register */
+#define ETH_MMCCR_MCFHP      ((uint32_t)0x00000020)  /* MMC counter Full-Half preset */
+#define ETH_MMCCR_MCP        ((uint32_t)0x00000010)  /* MMC counter preset */
+#define ETH_MMCCR_MCF        ((uint32_t)0x00000008)  /* MMC Counter Freeze */
+#define ETH_MMCCR_ROR        ((uint32_t)0x00000004)  /* Reset on Read */
+#define ETH_MMCCR_CSR        ((uint32_t)0x00000002)  /* Counter Stop Rollover */
+#define ETH_MMCCR_CR         ((uint32_t)0x00000001)  /* Counters Reset */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Register */
+#define ETH_MMCRIR_RGUFS     ((uint32_t)0x00020000)  /* Set when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIR_RFAES     ((uint32_t)0x00000040)  /* Set when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIR_RFCES     ((uint32_t)0x00000020)  /* Set when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Register */
+#define ETH_MMCTIR_TGFS      ((uint32_t)0x00200000)  /* Set when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFMSCS   ((uint32_t)0x00008000)  /* Set when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFSCS    ((uint32_t)0x00004000)  /* Set when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */
+#define ETH_MMCRIMR_RGUFM    ((uint32_t)0x00020000)  /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFAEM    ((uint32_t)0x00000040)  /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFCEM    ((uint32_t)0x00000020)  /* Mask the interrupt when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */
+#define ETH_MMCTIMR_TGFM     ((uint32_t)0x00200000)  /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFMSCM  ((uint32_t)0x00008000)  /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFSCM   ((uint32_t)0x00004000)  /* Mask the interrupt when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */
+#define ETH_MMCTGFSCCR_TGFSCC     ((uint32_t)0xFFFFFFFF)  /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */
+#define ETH_MMCTGFMSCCR_TGFMSCC   ((uint32_t)0xFFFFFFFF)  /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */
+#define ETH_MMCTGFCR_TGFC    ((uint32_t)0xFFFFFFFF)  /* Number of good frames transmitted. */
+
+/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */
+#define ETH_MMCRFCECR_RFCEC  ((uint32_t)0xFFFFFFFF)  /* Number of frames received with CRC error. */
+
+/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */
+#define ETH_MMCRFAECR_RFAEC  ((uint32_t)0xFFFFFFFF)  /* Number of frames received with alignment (dribble) error */
+
+/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */
+#define ETH_MMCRGUFCR_RGUFC  ((uint32_t)0xFFFFFFFF)  /* Number of good unicast frames received. */
+
+/******************************************************************************/
+/*               Ethernet PTP Registers bits definition                       */
+/******************************************************************************/
+
+/* Bit definition for Ethernet PTP Time Stamp Contol Register */
+#define ETH_PTPTSCR_TSCNT       ((uint32_t)0x00030000)  /* Time stamp clock node type */
+#define ETH_PTPTSSR_TSSMRME     ((uint32_t)0x00008000)  /* Time stamp snapshot for message relevant to master enable */
+#define ETH_PTPTSSR_TSSEME      ((uint32_t)0x00004000)  /* Time stamp snapshot for event message enable */
+#define ETH_PTPTSSR_TSSIPV4FE   ((uint32_t)0x00002000)  /* Time stamp snapshot for IPv4 frames enable */
+#define ETH_PTPTSSR_TSSIPV6FE   ((uint32_t)0x00001000)  /* Time stamp snapshot for IPv6 frames enable */
+#define ETH_PTPTSSR_TSSPTPOEFE  ((uint32_t)0x00000800)  /* Time stamp snapshot for PTP over ethernet frames enable */
+#define ETH_PTPTSSR_TSPTPPSV2E  ((uint32_t)0x00000400)  /* Time stamp PTP packet snooping for version2 format enable */
+#define ETH_PTPTSSR_TSSSR       ((uint32_t)0x00000200)  /* Time stamp Sub-seconds rollover */
+#define ETH_PTPTSSR_TSSARFE     ((uint32_t)0x00000100)  /* Time stamp snapshot for all received frames enable */
+
+#define ETH_PTPTSCR_TSARU    ((uint32_t)0x00000020)  /* Addend register update */
+#define ETH_PTPTSCR_TSITE    ((uint32_t)0x00000010)  /* Time stamp interrupt trigger enable */
+#define ETH_PTPTSCR_TSSTU    ((uint32_t)0x00000008)  /* Time stamp update */
+#define ETH_PTPTSCR_TSSTI    ((uint32_t)0x00000004)  /* Time stamp initialize */
+#define ETH_PTPTSCR_TSFCU    ((uint32_t)0x00000002)  /* Time stamp fine or coarse update */
+#define ETH_PTPTSCR_TSE      ((uint32_t)0x00000001)  /* Time stamp enable */
+
+/* Bit definition for Ethernet PTP Sub-Second Increment Register */
+#define ETH_PTPSSIR_STSSI    ((uint32_t)0x000000FF)  /* System time Sub-second increment value */
+
+/* Bit definition for Ethernet PTP Time Stamp High Register */
+#define ETH_PTPTSHR_STS      ((uint32_t)0xFFFFFFFF)  /* System Time second */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Register */
+#define ETH_PTPTSLR_STPNS    ((uint32_t)0x80000000)  /* System Time Positive or negative time */
+#define ETH_PTPTSLR_STSS     ((uint32_t)0x7FFFFFFF)  /* System Time sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp High Update Register */
+#define ETH_PTPTSHUR_TSUS    ((uint32_t)0xFFFFFFFF)  /* Time stamp update seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Update Register */
+#define ETH_PTPTSLUR_TSUPNS  ((uint32_t)0x80000000)  /* Time stamp update Positive or negative time */
+#define ETH_PTPTSLUR_TSUSS   ((uint32_t)0x7FFFFFFF)  /* Time stamp update sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Addend Register */
+#define ETH_PTPTSAR_TSA      ((uint32_t)0xFFFFFFFF)  /* Time stamp addend */
+
+/* Bit definition for Ethernet PTP Target Time High Register */
+#define ETH_PTPTTHR_TTSH     ((uint32_t)0xFFFFFFFF)  /* Target time stamp high */
+
+/* Bit definition for Ethernet PTP Target Time Low Register */
+#define ETH_PTPTTLR_TTSL     ((uint32_t)0xFFFFFFFF)  /* Target time stamp low */
+
+/* Bit definition for Ethernet PTP Time Stamp Status Register */
+#define ETH_PTPTSSR_TSTTR    ((uint32_t)0x00000020)  /* Time stamp target time reached */
+#define ETH_PTPTSSR_TSSO     ((uint32_t)0x00000010)  /* Time stamp seconds overflow */
+
+/******************************************************************************/
+/*                 Ethernet DMA Registers bits definition                     */
+/******************************************************************************/
+
+/* Bit definition for Ethernet DMA Bus Mode Register */
+#define ETH_DMABMR_AAB       ((uint32_t)0x02000000)  /* Address-Aligned beats */
+#define ETH_DMABMR_FPM        ((uint32_t)0x01000000)  /* 4xPBL mode */
+#define ETH_DMABMR_USP       ((uint32_t)0x00800000)  /* Use separate PBL */
+#define ETH_DMABMR_RDP       ((uint32_t)0x007E0000)  /* RxDMA PBL */
+  #define ETH_DMABMR_RDP_1Beat    ((uint32_t)0x00020000)  /* maximum number of beats to be transferred in one RxDMA transaction is 1 */
+  #define ETH_DMABMR_RDP_2Beat    ((uint32_t)0x00040000)  /* maximum number of beats to be transferred in one RxDMA transaction is 2 */
+  #define ETH_DMABMR_RDP_4Beat    ((uint32_t)0x00080000)  /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+  #define ETH_DMABMR_RDP_8Beat    ((uint32_t)0x00100000)  /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+  #define ETH_DMABMR_RDP_16Beat   ((uint32_t)0x00200000)  /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+  #define ETH_DMABMR_RDP_32Beat   ((uint32_t)0x00400000)  /* maximum number of beats to be transferred in one RxDMA transaction is 32 */                
+  #define ETH_DMABMR_RDP_4xPBL_4Beat   ((uint32_t)0x01020000)  /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+  #define ETH_DMABMR_RDP_4xPBL_8Beat   ((uint32_t)0x01040000)  /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+  #define ETH_DMABMR_RDP_4xPBL_16Beat  ((uint32_t)0x01080000)  /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+  #define ETH_DMABMR_RDP_4xPBL_32Beat  ((uint32_t)0x01100000)  /* maximum number of beats to be transferred in one RxDMA transaction is 32 */
+  #define ETH_DMABMR_RDP_4xPBL_64Beat  ((uint32_t)0x01200000)  /* maximum number of beats to be transferred in one RxDMA transaction is 64 */
+  #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000)  /* maximum number of beats to be transferred in one RxDMA transaction is 128 */  
+#define ETH_DMABMR_FB        ((uint32_t)0x00010000)  /* Fixed Burst */
+#define ETH_DMABMR_RTPR      ((uint32_t)0x0000C000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_1_1     ((uint32_t)0x00000000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_2_1     ((uint32_t)0x00004000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_3_1     ((uint32_t)0x00008000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_4_1     ((uint32_t)0x0000C000)  /* Rx Tx priority ratio */  
+#define ETH_DMABMR_PBL    ((uint32_t)0x00003F00)  /* Programmable burst length */
+  #define ETH_DMABMR_PBL_1Beat    ((uint32_t)0x00000100)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+  #define ETH_DMABMR_PBL_2Beat    ((uint32_t)0x00000200)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+  #define ETH_DMABMR_PBL_4Beat    ((uint32_t)0x00000400)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+  #define ETH_DMABMR_PBL_8Beat    ((uint32_t)0x00000800)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+  #define ETH_DMABMR_PBL_16Beat   ((uint32_t)0x00001000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+  #define ETH_DMABMR_PBL_32Beat   ((uint32_t)0x00002000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */                
+  #define ETH_DMABMR_PBL_4xPBL_4Beat   ((uint32_t)0x01000100)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+  #define ETH_DMABMR_PBL_4xPBL_8Beat   ((uint32_t)0x01000200)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+  #define ETH_DMABMR_PBL_4xPBL_16Beat  ((uint32_t)0x01000400)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+  #define ETH_DMABMR_PBL_4xPBL_32Beat  ((uint32_t)0x01000800)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+  #define ETH_DMABMR_PBL_4xPBL_64Beat  ((uint32_t)0x01001000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+  #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+#define ETH_DMABMR_EDE       ((uint32_t)0x00000080)  /* Enhanced Descriptor Enable */
+#define ETH_DMABMR_DSL       ((uint32_t)0x0000007C)  /* Descriptor Skip Length */
+#define ETH_DMABMR_DA        ((uint32_t)0x00000002)  /* DMA arbitration scheme */
+#define ETH_DMABMR_SR        ((uint32_t)0x00000001)  /* Software reset */
+
+/* Bit definition for Ethernet DMA Transmit Poll Demand Register */
+#define ETH_DMATPDR_TPD      ((uint32_t)0xFFFFFFFF)  /* Transmit poll demand */
+
+/* Bit definition for Ethernet DMA Receive Poll Demand Register */
+#define ETH_DMARPDR_RPD      ((uint32_t)0xFFFFFFFF)  /* Receive poll demand  */
+
+/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */
+#define ETH_DMARDLAR_SRL     ((uint32_t)0xFFFFFFFF)  /* Start of receive list */
+
+/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */
+#define ETH_DMATDLAR_STL     ((uint32_t)0xFFFFFFFF)  /* Start of transmit list */
+
+/* Bit definition for Ethernet DMA Status Register */
+#define ETH_DMASR_TSTS       ((uint32_t)0x20000000)  /* Time-stamp trigger status */
+#define ETH_DMASR_PMTS       ((uint32_t)0x10000000)  /* PMT status */
+#define ETH_DMASR_MMCS       ((uint32_t)0x08000000)  /* MMC status */
+#define ETH_DMASR_EBS        ((uint32_t)0x03800000)  /* Error bits status */
+  /* combination with EBS[2:0] for GetFlagStatus function */
+  #define ETH_DMASR_EBS_DescAccess      ((uint32_t)0x02000000)  /* Error bits 0-data buffer, 1-desc. access */
+  #define ETH_DMASR_EBS_ReadTransf      ((uint32_t)0x01000000)  /* Error bits 0-write trnsf, 1-read transfr */
+  #define ETH_DMASR_EBS_DataTransfTx    ((uint32_t)0x00800000)  /* Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMASR_TPS         ((uint32_t)0x00700000)  /* Transmit process state */
+  #define ETH_DMASR_TPS_Stopped         ((uint32_t)0x00000000)  /* Stopped - Reset or Stop Tx Command issued  */
+  #define ETH_DMASR_TPS_Fetching        ((uint32_t)0x00100000)  /* Running - fetching the Tx descriptor */
+  #define ETH_DMASR_TPS_Waiting         ((uint32_t)0x00200000)  /* Running - waiting for status */
+  #define ETH_DMASR_TPS_Reading         ((uint32_t)0x00300000)  /* Running - reading the data from host memory */
+  #define ETH_DMASR_TPS_Suspended       ((uint32_t)0x00600000)  /* Suspended - Tx Descriptor unavailabe */
+  #define ETH_DMASR_TPS_Closing         ((uint32_t)0x00700000)  /* Running - closing Rx descriptor */
+#define ETH_DMASR_RPS         ((uint32_t)0x000E0000)  /* Receive process state */
+  #define ETH_DMASR_RPS_Stopped         ((uint32_t)0x00000000)  /* Stopped - Reset or Stop Rx Command issued */
+  #define ETH_DMASR_RPS_Fetching        ((uint32_t)0x00020000)  /* Running - fetching the Rx descriptor */
+  #define ETH_DMASR_RPS_Waiting         ((uint32_t)0x00060000)  /* Running - waiting for packet */
+  #define ETH_DMASR_RPS_Suspended       ((uint32_t)0x00080000)  /* Suspended - Rx Descriptor unavailable */
+  #define ETH_DMASR_RPS_Closing         ((uint32_t)0x000A0000)  /* Running - closing descriptor */
+  #define ETH_DMASR_RPS_Queuing         ((uint32_t)0x000E0000)  /* Running - queuing the recieve frame into host memory */
+#define ETH_DMASR_NIS        ((uint32_t)0x00010000)  /* Normal interrupt summary */
+#define ETH_DMASR_AIS        ((uint32_t)0x00008000)  /* Abnormal interrupt summary */
+#define ETH_DMASR_ERS        ((uint32_t)0x00004000)  /* Early receive status */
+#define ETH_DMASR_FBES       ((uint32_t)0x00002000)  /* Fatal bus error status */
+#define ETH_DMASR_ETS        ((uint32_t)0x00000400)  /* Early transmit status */
+#define ETH_DMASR_RWTS       ((uint32_t)0x00000200)  /* Receive watchdog timeout status */
+#define ETH_DMASR_RPSS       ((uint32_t)0x00000100)  /* Receive process stopped status */
+#define ETH_DMASR_RBUS       ((uint32_t)0x00000080)  /* Receive buffer unavailable status */
+#define ETH_DMASR_RS         ((uint32_t)0x00000040)  /* Receive status */
+#define ETH_DMASR_TUS        ((uint32_t)0x00000020)  /* Transmit underflow status */
+#define ETH_DMASR_ROS        ((uint32_t)0x00000010)  /* Receive overflow status */
+#define ETH_DMASR_TJTS       ((uint32_t)0x00000008)  /* Transmit jabber timeout status */
+#define ETH_DMASR_TBUS       ((uint32_t)0x00000004)  /* Transmit buffer unavailable status */
+#define ETH_DMASR_TPSS       ((uint32_t)0x00000002)  /* Transmit process stopped status */
+#define ETH_DMASR_TS         ((uint32_t)0x00000001)  /* Transmit status */
+
+/* Bit definition for Ethernet DMA Operation Mode Register */
+#define ETH_DMAOMR_DTCEFD    ((uint32_t)0x04000000)  /* Disable Dropping of TCP/IP checksum error frames */
+#define ETH_DMAOMR_RSF       ((uint32_t)0x02000000)  /* Receive store and forward */
+#define ETH_DMAOMR_DFRF      ((uint32_t)0x01000000)  /* Disable flushing of received frames */
+#define ETH_DMAOMR_TSF       ((uint32_t)0x00200000)  /* Transmit store and forward */
+#define ETH_DMAOMR_FTF       ((uint32_t)0x00100000)  /* Flush transmit FIFO */
+#define ETH_DMAOMR_TTC       ((uint32_t)0x0001C000)  /* Transmit threshold control */
+  #define ETH_DMAOMR_TTC_64Bytes       ((uint32_t)0x00000000)  /* threshold level of the MTL Transmit FIFO is 64 Bytes */
+  #define ETH_DMAOMR_TTC_128Bytes      ((uint32_t)0x00004000)  /* threshold level of the MTL Transmit FIFO is 128 Bytes */
+  #define ETH_DMAOMR_TTC_192Bytes      ((uint32_t)0x00008000)  /* threshold level of the MTL Transmit FIFO is 192 Bytes */
+  #define ETH_DMAOMR_TTC_256Bytes      ((uint32_t)0x0000C000)  /* threshold level of the MTL Transmit FIFO is 256 Bytes */
+  #define ETH_DMAOMR_TTC_40Bytes       ((uint32_t)0x00010000)  /* threshold level of the MTL Transmit FIFO is 40 Bytes */
+  #define ETH_DMAOMR_TTC_32Bytes       ((uint32_t)0x00014000)  /* threshold level of the MTL Transmit FIFO is 32 Bytes */
+  #define ETH_DMAOMR_TTC_24Bytes       ((uint32_t)0x00018000)  /* threshold level of the MTL Transmit FIFO is 24 Bytes */
+  #define ETH_DMAOMR_TTC_16Bytes       ((uint32_t)0x0001C000)  /* threshold level of the MTL Transmit FIFO is 16 Bytes */
+#define ETH_DMAOMR_ST        ((uint32_t)0x00002000)  /* Start/stop transmission command */
+#define ETH_DMAOMR_FEF       ((uint32_t)0x00000080)  /* Forward error frames */
+#define ETH_DMAOMR_FUGF      ((uint32_t)0x00000040)  /* Forward undersized good frames */
+#define ETH_DMAOMR_RTC       ((uint32_t)0x00000018)  /* receive threshold control */
+  #define ETH_DMAOMR_RTC_64Bytes       ((uint32_t)0x00000000)  /* threshold level of the MTL Receive FIFO is 64 Bytes */
+  #define ETH_DMAOMR_RTC_32Bytes       ((uint32_t)0x00000008)  /* threshold level of the MTL Receive FIFO is 32 Bytes */
+  #define ETH_DMAOMR_RTC_96Bytes       ((uint32_t)0x00000010)  /* threshold level of the MTL Receive FIFO is 96 Bytes */
+  #define ETH_DMAOMR_RTC_128Bytes      ((uint32_t)0x00000018)  /* threshold level of the MTL Receive FIFO is 128 Bytes */
+#define ETH_DMAOMR_OSF       ((uint32_t)0x00000004)  /* operate on second frame */
+#define ETH_DMAOMR_SR        ((uint32_t)0x00000002)  /* Start/stop receive */
+
+/* Bit definition for Ethernet DMA Interrupt Enable Register */
+#define ETH_DMAIER_NISE      ((uint32_t)0x00010000)  /* Normal interrupt summary enable */
+#define ETH_DMAIER_AISE      ((uint32_t)0x00008000)  /* Abnormal interrupt summary enable */
+#define ETH_DMAIER_ERIE      ((uint32_t)0x00004000)  /* Early receive interrupt enable */
+#define ETH_DMAIER_FBEIE     ((uint32_t)0x00002000)  /* Fatal bus error interrupt enable */
+#define ETH_DMAIER_ETIE      ((uint32_t)0x00000400)  /* Early transmit interrupt enable */
+#define ETH_DMAIER_RWTIE     ((uint32_t)0x00000200)  /* Receive watchdog timeout interrupt enable */
+#define ETH_DMAIER_RPSIE     ((uint32_t)0x00000100)  /* Receive process stopped interrupt enable */
+#define ETH_DMAIER_RBUIE     ((uint32_t)0x00000080)  /* Receive buffer unavailable interrupt enable */
+#define ETH_DMAIER_RIE       ((uint32_t)0x00000040)  /* Receive interrupt enable */
+#define ETH_DMAIER_TUIE      ((uint32_t)0x00000020)  /* Transmit Underflow interrupt enable */
+#define ETH_DMAIER_ROIE      ((uint32_t)0x00000010)  /* Receive Overflow interrupt enable */
+#define ETH_DMAIER_TJTIE     ((uint32_t)0x00000008)  /* Transmit jabber timeout interrupt enable */
+#define ETH_DMAIER_TBUIE     ((uint32_t)0x00000004)  /* Transmit buffer unavailable interrupt enable */
+#define ETH_DMAIER_TPSIE     ((uint32_t)0x00000002)  /* Transmit process stopped interrupt enable */
+#define ETH_DMAIER_TIE       ((uint32_t)0x00000001)  /* Transmit interrupt enable */
+
+/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */
+#define ETH_DMAMFBOCR_OFOC   ((uint32_t)0x10000000)  /* Overflow bit for FIFO overflow counter */
+#define ETH_DMAMFBOCR_MFA    ((uint32_t)0x0FFE0000)  /* Number of frames missed by the application */
+#define ETH_DMAMFBOCR_OMFC   ((uint32_t)0x00010000)  /* Overflow bit for missed frame counter */
+#define ETH_DMAMFBOCR_MFC    ((uint32_t)0x0000FFFF)  /* Number of frames missed by the controller */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */
+#define ETH_DMACHTDR_HTDAP   ((uint32_t)0xFFFFFFFF)  /* Host transmit descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */
+#define ETH_DMACHRDR_HRDAP   ((uint32_t)0xFFFFFFFF)  /* Host receive descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */
+#define ETH_DMACHTBAR_HTBAP  ((uint32_t)0xFFFFFFFF)  /* Host transmit buffer address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */
+#define ETH_DMACHRBAR_HRBAP  ((uint32_t)0xFFFFFFFF)  /* Host receive buffer address pointer */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                       USB_OTG                              */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for USB_OTG_GOTGCTL register  ********************/
+#define USB_OTG_GOTGCTL_SRQSCS                  ((uint32_t)0x00000001)         /*!< Session request success */
+#define USB_OTG_GOTGCTL_SRQ                     ((uint32_t)0x00000002)         /*!< Session request */
+#define USB_OTG_GOTGCTL_VBVALOEN                ((uint32_t)0x00000004)         /*!< VBUS valid override enable */
+#define USB_OTG_GOTGCTL_VBVALOVAL               ((uint32_t)0x00000008)         /*!< VBUS valid override value */
+#define USB_OTG_GOTGCTL_AVALOEN                 ((uint32_t)0x00000010)         /*!< A-peripheral session valid override enable */
+#define USB_OTG_GOTGCTL_AVALOVAL                ((uint32_t)0x00000020)         /*!< A-peripheral session valid override value */
+#define USB_OTG_GOTGCTL_BVALOEN                 ((uint32_t)0x00000040)         /*!< B-peripheral session valid override enable */
+#define USB_OTG_GOTGCTL_BVALOVAL                ((uint32_t)0x00000080)         /*!< B-peripheral session valid override value  */
+#define USB_OTG_GOTGCTL_HNGSCS                  ((uint32_t)0x00000100)         /*!< Host set HNP enable */
+#define USB_OTG_GOTGCTL_HNPRQ                   ((uint32_t)0x00000200)         /*!< HNP request */
+#define USB_OTG_GOTGCTL_HSHNPEN                 ((uint32_t)0x00000400)         /*!< Host set HNP enable */
+#define USB_OTG_GOTGCTL_DHNPEN                  ((uint32_t)0x00000800)         /*!< Device HNP enabled */
+#define USB_OTG_GOTGCTL_EHEN                    ((uint32_t)0x00001000)         /*!< Embedded host enable */
+#define USB_OTG_GOTGCTL_CIDSTS                  ((uint32_t)0x00010000)         /*!< Connector ID status */
+#define USB_OTG_GOTGCTL_DBCT                    ((uint32_t)0x00020000)         /*!< Long/short debounce time */
+#define USB_OTG_GOTGCTL_ASVLD                   ((uint32_t)0x00040000)         /*!< A-session valid  */
+#define USB_OTG_GOTGCTL_BSESVLD                 ((uint32_t)0x00080000)         /*!< B-session valid */
+#define USB_OTG_GOTGCTL_OTGVER                  ((uint32_t)0x00100000)         /*!< OTG version  */
+
+/********************  Bit definition for USB_OTG_HCFG register  ********************/
+#define USB_OTG_HCFG_FSLSPCS                 ((uint32_t)0x00000003)            /*!< FS/LS PHY clock select  */
+#define USB_OTG_HCFG_FSLSPCS_0               ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_HCFG_FSLSPCS_1               ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_HCFG_FSLSS                   ((uint32_t)0x00000004)            /*!< FS- and LS-only support */
+
+/********************  Bit definition for USB_OTG_DCFG register  ********************/
+#define USB_OTG_DCFG_DSPD                    ((uint32_t)0x00000003)            /*!< Device speed */
+#define USB_OTG_DCFG_DSPD_0                  ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_DCFG_DSPD_1                  ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_DCFG_NZLSOHSK                ((uint32_t)0x00000004)            /*!< Nonzero-length status OUT handshake */
+
+#define USB_OTG_DCFG_DAD                     ((uint32_t)0x000007F0)            /*!< Device address */
+#define USB_OTG_DCFG_DAD_0                   ((uint32_t)0x00000010)            /*!<Bit 0 */
+#define USB_OTG_DCFG_DAD_1                   ((uint32_t)0x00000020)            /*!<Bit 1 */
+#define USB_OTG_DCFG_DAD_2                   ((uint32_t)0x00000040)            /*!<Bit 2 */
+#define USB_OTG_DCFG_DAD_3                   ((uint32_t)0x00000080)            /*!<Bit 3 */
+#define USB_OTG_DCFG_DAD_4                   ((uint32_t)0x00000100)            /*!<Bit 4 */
+#define USB_OTG_DCFG_DAD_5                   ((uint32_t)0x00000200)            /*!<Bit 5 */
+#define USB_OTG_DCFG_DAD_6                   ((uint32_t)0x00000400)            /*!<Bit 6 */
+
+#define USB_OTG_DCFG_PFIVL                   ((uint32_t)0x00001800)            /*!< Periodic (micro)frame interval */
+#define USB_OTG_DCFG_PFIVL_0                 ((uint32_t)0x00000800)            /*!<Bit 0 */
+#define USB_OTG_DCFG_PFIVL_1                 ((uint32_t)0x00001000)            /*!<Bit 1 */
+
+#define USB_OTG_DCFG_PERSCHIVL               ((uint32_t)0x03000000)            /*!< Periodic scheduling interval */
+#define USB_OTG_DCFG_PERSCHIVL_0             ((uint32_t)0x01000000)            /*!<Bit 0 */
+#define USB_OTG_DCFG_PERSCHIVL_1             ((uint32_t)0x02000000)            /*!<Bit 1 */
+
+/********************  Bit definition for USB_OTG_PCGCR register  ********************/
+#define USB_OTG_PCGCR_STPPCLK                 ((uint32_t)0x00000001)            /*!< Stop PHY clock */
+#define USB_OTG_PCGCR_GATEHCLK                ((uint32_t)0x00000002)            /*!< Gate HCLK */
+#define USB_OTG_PCGCR_PHYSUSP                 ((uint32_t)0x00000010)            /*!< PHY suspended */
+
+/********************  Bit definition for USB_OTG_GOTGINT register  ********************/
+#define USB_OTG_GOTGINT_SEDET                   ((uint32_t)0x00000004)            /*!< Session end detected                   */
+#define USB_OTG_GOTGINT_SRSSCHG                 ((uint32_t)0x00000100)            /*!< Session request success status change  */
+#define USB_OTG_GOTGINT_HNSSCHG                 ((uint32_t)0x00000200)            /*!< Host negotiation success status change */
+#define USB_OTG_GOTGINT_HNGDET                  ((uint32_t)0x00020000)            /*!< Host negotiation detected              */
+#define USB_OTG_GOTGINT_ADTOCHG                 ((uint32_t)0x00040000)            /*!< A-device timeout change                */
+#define USB_OTG_GOTGINT_DBCDNE                  ((uint32_t)0x00080000)            /*!< Debounce done                          */
+#define USB_OTG_GOTGINT_IDCHNG                  ((uint32_t)0x00100000)            /*!< Change in ID pin input value           */
+
+/********************  Bit definition for USB_OTG_DCTL register  ********************/
+#define USB_OTG_DCTL_RWUSIG                  ((uint32_t)0x00000001)            /*!< Remote wakeup signaling */
+#define USB_OTG_DCTL_SDIS                    ((uint32_t)0x00000002)            /*!< Soft disconnect         */
+#define USB_OTG_DCTL_GINSTS                  ((uint32_t)0x00000004)            /*!< Global IN NAK status    */
+#define USB_OTG_DCTL_GONSTS                  ((uint32_t)0x00000008)            /*!< Global OUT NAK status   */
+
+#define USB_OTG_DCTL_TCTL                    ((uint32_t)0x00000070)            /*!< Test control */
+#define USB_OTG_DCTL_TCTL_0                  ((uint32_t)0x00000010)            /*!<Bit 0 */
+#define USB_OTG_DCTL_TCTL_1                  ((uint32_t)0x00000020)            /*!<Bit 1 */
+#define USB_OTG_DCTL_TCTL_2                  ((uint32_t)0x00000040)            /*!<Bit 2 */
+#define USB_OTG_DCTL_SGINAK                  ((uint32_t)0x00000080)            /*!< Set global IN NAK         */
+#define USB_OTG_DCTL_CGINAK                  ((uint32_t)0x00000100)            /*!< Clear global IN NAK       */
+#define USB_OTG_DCTL_SGONAK                  ((uint32_t)0x00000200)            /*!< Set global OUT NAK        */
+#define USB_OTG_DCTL_CGONAK                  ((uint32_t)0x00000400)            /*!< Clear global OUT NAK      */
+#define USB_OTG_DCTL_POPRGDNE                ((uint32_t)0x00000800)            /*!< Power-on programming done */
+
+/********************  Bit definition for USB_OTG_HFIR register  ********************/
+#define USB_OTG_HFIR_FRIVL                   ((uint32_t)0x0000FFFF)            /*!< Frame interval */
+
+/********************  Bit definition for USB_OTG_HFNUM register  ********************/
+#define USB_OTG_HFNUM_FRNUM                   ((uint32_t)0x0000FFFF)            /*!< Frame number         */
+#define USB_OTG_HFNUM_FTREM                   ((uint32_t)0xFFFF0000)            /*!< Frame time remaining */
+
+/********************  Bit definition for USB_OTG_DSTS register  ********************/
+#define USB_OTG_DSTS_SUSPSTS                 ((uint32_t)0x00000001)            /*!< Suspend status   */
+
+#define USB_OTG_DSTS_ENUMSPD                 ((uint32_t)0x00000006)            /*!< Enumerated speed */
+#define USB_OTG_DSTS_ENUMSPD_0               ((uint32_t)0x00000002)            /*!<Bit 0 */
+#define USB_OTG_DSTS_ENUMSPD_1               ((uint32_t)0x00000004)            /*!<Bit 1 */
+#define USB_OTG_DSTS_EERR                    ((uint32_t)0x00000008)            /*!< Erratic error     */
+#define USB_OTG_DSTS_FNSOF                   ((uint32_t)0x003FFF00)            /*!< Frame number of the received SOF */
+
+/********************  Bit definition for USB_OTG_GAHBCFG register  ********************/
+#define USB_OTG_GAHBCFG_GINT                    ((uint32_t)0x00000001)            /*!< Global interrupt mask */
+#define USB_OTG_GAHBCFG_HBSTLEN                 ((uint32_t)0x0000001E)            /*!< Burst length/type */
+#define USB_OTG_GAHBCFG_HBSTLEN_0               ((uint32_t)0x00000002)            /*!<Bit 0 */
+#define USB_OTG_GAHBCFG_HBSTLEN_1               ((uint32_t)0x00000004)            /*!<Bit 1 */
+#define USB_OTG_GAHBCFG_HBSTLEN_2               ((uint32_t)0x00000008)            /*!<Bit 2 */
+#define USB_OTG_GAHBCFG_HBSTLEN_3               ((uint32_t)0x00000010)            /*!<Bit 3 */
+#define USB_OTG_GAHBCFG_DMAEN                   ((uint32_t)0x00000020)            /*!< DMA enable */
+#define USB_OTG_GAHBCFG_TXFELVL                 ((uint32_t)0x00000080)            /*!< TxFIFO empty level */
+#define USB_OTG_GAHBCFG_PTXFELVL                ((uint32_t)0x00000100)            /*!< Periodic TxFIFO empty level */
+
+/********************  Bit definition for USB_OTG_GUSBCFG register  ********************/
+#define USB_OTG_GUSBCFG_TOCAL                   ((uint32_t)0x00000007)            /*!< FS timeout calibration */
+#define USB_OTG_GUSBCFG_TOCAL_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TOCAL_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TOCAL_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_PHYSEL                  ((uint32_t)0x00000040)            /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */
+#define USB_OTG_GUSBCFG_SRPCAP                  ((uint32_t)0x00000100)            /*!< SRP-capable */
+#define USB_OTG_GUSBCFG_HNPCAP                  ((uint32_t)0x00000200)            /*!< HNP-capable */
+#define USB_OTG_GUSBCFG_TRDT                    ((uint32_t)0x00003C00)            /*!< USB turnaround time */
+#define USB_OTG_GUSBCFG_TRDT_0                  ((uint32_t)0x00000400)            /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TRDT_1                  ((uint32_t)0x00000800)            /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TRDT_2                  ((uint32_t)0x00001000)            /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_TRDT_3                  ((uint32_t)0x00002000)            /*!<Bit 3 */
+#define USB_OTG_GUSBCFG_PHYLPCS                 ((uint32_t)0x00008000)            /*!< PHY Low-power clock select */
+#define USB_OTG_GUSBCFG_ULPIFSLS                ((uint32_t)0x00020000)            /*!< ULPI FS/LS select               */
+#define USB_OTG_GUSBCFG_ULPIAR                  ((uint32_t)0x00040000)            /*!< ULPI Auto-resume                */
+#define USB_OTG_GUSBCFG_ULPICSM                 ((uint32_t)0x00080000)            /*!< ULPI Clock SuspendM             */
+#define USB_OTG_GUSBCFG_ULPIEVBUSD              ((uint32_t)0x00100000)            /*!< ULPI External VBUS Drive        */
+#define USB_OTG_GUSBCFG_ULPIEVBUSI              ((uint32_t)0x00200000)            /*!< ULPI external VBUS indicator    */
+#define USB_OTG_GUSBCFG_TSDPS                   ((uint32_t)0x00400000)            /*!< TermSel DLine pulsing selection */
+#define USB_OTG_GUSBCFG_PCCI                    ((uint32_t)0x00800000)            /*!< Indicator complement            */
+#define USB_OTG_GUSBCFG_PTCI                    ((uint32_t)0x01000000)            /*!< Indicator pass through          */
+#define USB_OTG_GUSBCFG_ULPIIPD                 ((uint32_t)0x02000000)            /*!< ULPI interface protect disable  */
+#define USB_OTG_GUSBCFG_FHMOD                   ((uint32_t)0x20000000)            /*!< Forced host mode                */
+#define USB_OTG_GUSBCFG_FDMOD                   ((uint32_t)0x40000000)            /*!< Forced peripheral mode          */
+#define USB_OTG_GUSBCFG_CTXPKT                  ((uint32_t)0x80000000)            /*!< Corrupt Tx packet               */
+
+/********************  Bit definition for USB_OTG_GRSTCTL register  ********************/
+#define USB_OTG_GRSTCTL_CSRST                   ((uint32_t)0x00000001)            /*!< Core soft reset          */
+#define USB_OTG_GRSTCTL_HSRST                   ((uint32_t)0x00000002)            /*!< HCLK soft reset          */
+#define USB_OTG_GRSTCTL_FCRST                   ((uint32_t)0x00000004)            /*!< Host frame counter reset */
+#define USB_OTG_GRSTCTL_RXFFLSH                 ((uint32_t)0x00000010)            /*!< RxFIFO flush             */
+#define USB_OTG_GRSTCTL_TXFFLSH                 ((uint32_t)0x00000020)            /*!< TxFIFO flush             */
+#define USB_OTG_GRSTCTL_TXFNUM                  ((uint32_t)0x000007C0)            /*!< TxFIFO number */
+#define USB_OTG_GRSTCTL_TXFNUM_0                ((uint32_t)0x00000040)            /*!<Bit 0 */
+#define USB_OTG_GRSTCTL_TXFNUM_1                ((uint32_t)0x00000080)            /*!<Bit 1 */
+#define USB_OTG_GRSTCTL_TXFNUM_2                ((uint32_t)0x00000100)            /*!<Bit 2 */
+#define USB_OTG_GRSTCTL_TXFNUM_3                ((uint32_t)0x00000200)            /*!<Bit 3 */
+#define USB_OTG_GRSTCTL_TXFNUM_4                ((uint32_t)0x00000400)            /*!<Bit 4 */
+#define USB_OTG_GRSTCTL_DMAREQ                  ((uint32_t)0x40000000)            /*!< DMA request signal */
+#define USB_OTG_GRSTCTL_AHBIDL                  ((uint32_t)0x80000000)            /*!< AHB master idle */
+
+/********************  Bit definition for USB_OTG_DIEPMSK register  ********************/
+#define USB_OTG_DIEPMSK_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed interrupt mask                 */
+#define USB_OTG_DIEPMSK_EPDM                    ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt mask                  */
+#define USB_OTG_DIEPMSK_TOM                     ((uint32_t)0x00000008)            /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPMSK_ITTXFEMSK               ((uint32_t)0x00000010)            /*!< IN token received when TxFIFO empty mask          */
+#define USB_OTG_DIEPMSK_INEPNMM                 ((uint32_t)0x00000020)            /*!< IN token received with EP mismatch mask           */
+#define USB_OTG_DIEPMSK_INEPNEM                 ((uint32_t)0x00000040)            /*!< IN endpoint NAK effective mask                    */
+#define USB_OTG_DIEPMSK_TXFURM                  ((uint32_t)0x00000100)            /*!< FIFO underrun mask                                */
+#define USB_OTG_DIEPMSK_BIM                     ((uint32_t)0x00000200)            /*!< BNA interrupt mask                                */
+
+/********************  Bit definition for USB_OTG_HPTXSTS register  ********************/
+#define USB_OTG_HPTXSTS_PTXFSAVL                ((uint32_t)0x0000FFFF)            /*!< Periodic transmit data FIFO space available     */
+#define USB_OTG_HPTXSTS_PTXQSAV                 ((uint32_t)0x00FF0000)            /*!< Periodic transmit request queue space available */
+#define USB_OTG_HPTXSTS_PTXQSAV_0               ((uint32_t)0x00010000)            /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQSAV_1               ((uint32_t)0x00020000)            /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQSAV_2               ((uint32_t)0x00040000)            /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQSAV_3               ((uint32_t)0x00080000)            /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQSAV_4               ((uint32_t)0x00100000)            /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQSAV_5               ((uint32_t)0x00200000)            /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQSAV_6               ((uint32_t)0x00400000)            /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQSAV_7               ((uint32_t)0x00800000)            /*!<Bit 7 */
+
+#define USB_OTG_HPTXSTS_PTXQTOP                 ((uint32_t)0xFF000000)            /*!< Top of the periodic transmit request queue */
+#define USB_OTG_HPTXSTS_PTXQTOP_0               ((uint32_t)0x01000000)            /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQTOP_1               ((uint32_t)0x02000000)            /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQTOP_2               ((uint32_t)0x04000000)            /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQTOP_3               ((uint32_t)0x08000000)            /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQTOP_4               ((uint32_t)0x10000000)            /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQTOP_5               ((uint32_t)0x20000000)            /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQTOP_6               ((uint32_t)0x40000000)            /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQTOP_7               ((uint32_t)0x80000000)            /*!<Bit 7 */
+
+/********************  Bit definition for USB_OTG_HAINT register  ********************/
+#define USB_OTG_HAINT_HAINT                   ((uint32_t)0x0000FFFF)            /*!< Channel interrupts */
+
+/********************  Bit definition for USB_OTG_DOEPMSK register  ********************/
+#define USB_OTG_DOEPMSK_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPMSK_EPDM                    ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt mask               */
+#define USB_OTG_DOEPMSK_STUPM                   ((uint32_t)0x00000008)            /*!< SETUP phase done mask                          */
+#define USB_OTG_DOEPMSK_OTEPDM                  ((uint32_t)0x00000010)            /*!< OUT token received when endpoint disabled mask */
+#define USB_OTG_DOEPMSK_OTEPSPRM                ((uint32_t)0x00000020)            /*!< Status Phase Received mask                     */
+#define USB_OTG_DOEPMSK_B2BSTUP                 ((uint32_t)0x00000040)            /*!< Back-to-back SETUP packets received mask       */
+#define USB_OTG_DOEPMSK_OPEM                    ((uint32_t)0x00000100)            /*!< OUT packet error mask                          */
+#define USB_OTG_DOEPMSK_BOIM                    ((uint32_t)0x00000200)            /*!< BNA interrupt mask                             */
+
+/********************  Bit definition for USB_OTG_GINTSTS register  ********************/
+#define USB_OTG_GINTSTS_CMOD                    ((uint32_t)0x00000001)            /*!< Current mode of operation                      */
+#define USB_OTG_GINTSTS_MMIS                    ((uint32_t)0x00000002)            /*!< Mode mismatch interrupt                        */
+#define USB_OTG_GINTSTS_OTGINT                  ((uint32_t)0x00000004)            /*!< OTG interrupt                                  */
+#define USB_OTG_GINTSTS_SOF                     ((uint32_t)0x00000008)            /*!< Start of frame                                 */
+#define USB_OTG_GINTSTS_RXFLVL                  ((uint32_t)0x00000010)            /*!< RxFIFO nonempty                                */
+#define USB_OTG_GINTSTS_NPTXFE                  ((uint32_t)0x00000020)            /*!< Nonperiodic TxFIFO empty                       */
+#define USB_OTG_GINTSTS_GINAKEFF                ((uint32_t)0x00000040)            /*!< Global IN nonperiodic NAK effective            */
+#define USB_OTG_GINTSTS_BOUTNAKEFF              ((uint32_t)0x00000080)            /*!< Global OUT NAK effective                       */
+#define USB_OTG_GINTSTS_ESUSP                   ((uint32_t)0x00000400)            /*!< Early suspend                                  */
+#define USB_OTG_GINTSTS_USBSUSP                 ((uint32_t)0x00000800)            /*!< USB suspend                                    */
+#define USB_OTG_GINTSTS_USBRST                  ((uint32_t)0x00001000)            /*!< USB reset                                      */
+#define USB_OTG_GINTSTS_ENUMDNE                 ((uint32_t)0x00002000)            /*!< Enumeration done                               */
+#define USB_OTG_GINTSTS_ISOODRP                 ((uint32_t)0x00004000)            /*!< Isochronous OUT packet dropped interrupt       */
+#define USB_OTG_GINTSTS_EOPF                    ((uint32_t)0x00008000)            /*!< End of periodic frame interrupt                */
+#define USB_OTG_GINTSTS_IEPINT                  ((uint32_t)0x00040000)            /*!< IN endpoint interrupt                          */
+#define USB_OTG_GINTSTS_OEPINT                  ((uint32_t)0x00080000)            /*!< OUT endpoint interrupt                         */
+#define USB_OTG_GINTSTS_IISOIXFR                ((uint32_t)0x00100000)            /*!< Incomplete isochronous IN transfer             */
+#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT       ((uint32_t)0x00200000)            /*!< Incomplete periodic transfer                   */
+#define USB_OTG_GINTSTS_DATAFSUSP               ((uint32_t)0x00400000)            /*!< Data fetch suspended                           */
+#define USB_OTG_GINTSTS_RSTDET                  ((uint32_t)0x00800000)            /*!< Reset detected interrupt                       */
+#define USB_OTG_GINTSTS_HPRTINT                 ((uint32_t)0x01000000)            /*!< Host port interrupt                            */
+#define USB_OTG_GINTSTS_HCINT                   ((uint32_t)0x02000000)            /*!< Host channels interrupt                        */
+#define USB_OTG_GINTSTS_PTXFE                   ((uint32_t)0x04000000)            /*!< Periodic TxFIFO empty                          */
+#define USB_OTG_GINTSTS_LPMINT                  ((uint32_t)0x08000000)            /*!< LPM interrupt                                  */
+#define USB_OTG_GINTSTS_CIDSCHG                 ((uint32_t)0x10000000)            /*!< Connector ID status change                     */
+#define USB_OTG_GINTSTS_DISCINT                 ((uint32_t)0x20000000)            /*!< Disconnect detected interrupt                  */
+#define USB_OTG_GINTSTS_SRQINT                  ((uint32_t)0x40000000)            /*!< Session request/new session detected interrupt */
+#define USB_OTG_GINTSTS_WKUINT                  ((uint32_t)0x80000000)            /*!< Resume/remote wakeup detected interrupt        */
+
+/********************  Bit definition for USB_OTG_GINTMSK register  ********************/
+#define USB_OTG_GINTMSK_MMISM                   ((uint32_t)0x00000002)            /*!< Mode mismatch interrupt mask                        */
+#define USB_OTG_GINTMSK_OTGINT                  ((uint32_t)0x00000004)            /*!< OTG interrupt mask                                  */
+#define USB_OTG_GINTMSK_SOFM                    ((uint32_t)0x00000008)            /*!< Start of frame mask                                 */
+#define USB_OTG_GINTMSK_RXFLVLM                 ((uint32_t)0x00000010)            /*!< Receive FIFO nonempty mask                          */
+#define USB_OTG_GINTMSK_NPTXFEM                 ((uint32_t)0x00000020)            /*!< Nonperiodic TxFIFO empty mask                       */
+#define USB_OTG_GINTMSK_GINAKEFFM               ((uint32_t)0x00000040)            /*!< Global nonperiodic IN NAK effective mask            */
+#define USB_OTG_GINTMSK_GONAKEFFM               ((uint32_t)0x00000080)            /*!< Global OUT NAK effective mask                       */
+#define USB_OTG_GINTMSK_ESUSPM                  ((uint32_t)0x00000400)            /*!< Early suspend mask                                  */
+#define USB_OTG_GINTMSK_USBSUSPM                ((uint32_t)0x00000800)            /*!< USB suspend mask                                    */
+#define USB_OTG_GINTMSK_USBRST                  ((uint32_t)0x00001000)            /*!< USB reset mask                                      */
+#define USB_OTG_GINTMSK_ENUMDNEM                ((uint32_t)0x00002000)            /*!< Enumeration done mask                               */
+#define USB_OTG_GINTMSK_ISOODRPM                ((uint32_t)0x00004000)            /*!< Isochronous OUT packet dropped interrupt mask       */
+#define USB_OTG_GINTMSK_EOPFM                   ((uint32_t)0x00008000)            /*!< End of periodic frame interrupt mask                */
+#define USB_OTG_GINTMSK_EPMISM                  ((uint32_t)0x00020000)            /*!< Endpoint mismatch interrupt mask                    */
+#define USB_OTG_GINTMSK_IEPINT                  ((uint32_t)0x00040000)            /*!< IN endpoints interrupt mask                         */
+#define USB_OTG_GINTMSK_OEPINT                  ((uint32_t)0x00080000)            /*!< OUT endpoints interrupt mask                        */
+#define USB_OTG_GINTMSK_IISOIXFRM               ((uint32_t)0x00100000)            /*!< Incomplete isochronous IN transfer mask             */
+#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM         ((uint32_t)0x00200000)            /*!< Incomplete periodic transfer mask                   */
+#define USB_OTG_GINTMSK_FSUSPM                  ((uint32_t)0x00400000)            /*!< Data fetch suspended mask                           */
+#define USB_OTG_GINTMSK_RSTDEM                  ((uint32_t)0x00800000)            /*!< Reset detected interrupt mask                      */
+#define USB_OTG_GINTMSK_PRTIM                   ((uint32_t)0x01000000)            /*!< Host port interrupt mask                            */
+#define USB_OTG_GINTMSK_HCIM                    ((uint32_t)0x02000000)            /*!< Host channels interrupt mask                        */
+#define USB_OTG_GINTMSK_PTXFEM                  ((uint32_t)0x04000000)            /*!< Periodic TxFIFO empty mask                          */
+#define USB_OTG_GINTMSK_LPMINTM                 ((uint32_t)0x08000000)            /*!< LPM interrupt Mask                                  */
+#define USB_OTG_GINTMSK_CIDSCHGM                ((uint32_t)0x10000000)            /*!< Connector ID status change mask                     */
+#define USB_OTG_GINTMSK_DISCINT                 ((uint32_t)0x20000000)            /*!< Disconnect detected interrupt mask                  */
+#define USB_OTG_GINTMSK_SRQIM                   ((uint32_t)0x40000000)            /*!< Session request/new session detected interrupt mask */
+#define USB_OTG_GINTMSK_WUIM                    ((uint32_t)0x80000000)            /*!< Resume/remote wakeup detected interrupt mask        */
+
+/********************  Bit definition for USB_OTG_DAINT register  ********************/
+#define USB_OTG_DAINT_IEPINT                  ((uint32_t)0x0000FFFF)            /*!< IN endpoint interrupt bits  */
+#define USB_OTG_DAINT_OEPINT                  ((uint32_t)0xFFFF0000)            /*!< OUT endpoint interrupt bits */
+
+/********************  Bit definition for USB_OTG_HAINTMSK register  ********************/
+#define USB_OTG_HAINTMSK_HAINTM                  ((uint32_t)0x0000FFFF)            /*!< Channel interrupt mask */
+
+/********************  Bit definition for USB_OTG_GRXSTSP register  ********************/
+#define USB_OTG_GRXSTSP_EPNUM                    ((uint32_t)0x0000000F)            /*!< IN EP interrupt mask bits  */
+#define USB_OTG_GRXSTSP_BCNT                     ((uint32_t)0x00007FF0)            /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_DPID                     ((uint32_t)0x00018000)            /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_PKTSTS                   ((uint32_t)0x001E0000)            /*!< OUT EP interrupt mask bits */
+
+/********************  Bit definition for USB_OTG_DAINTMSK register  ********************/
+#define USB_OTG_DAINTMSK_IEPM                    ((uint32_t)0x0000FFFF)            /*!< IN EP interrupt mask bits */
+#define USB_OTG_DAINTMSK_OEPM                    ((uint32_t)0xFFFF0000)            /*!< OUT EP interrupt mask bits */
+
+/********************  Bit definition for OTG register  ********************/
+
+#define USB_OTG_CHNUM                   ((uint32_t)0x0000000F)            /*!< Channel number */
+#define USB_OTG_CHNUM_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_CHNUM_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_CHNUM_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_CHNUM_3                 ((uint32_t)0x00000008)            /*!<Bit 3 */
+#define USB_OTG_BCNT                    ((uint32_t)0x00007FF0)            /*!< Byte count */
+
+#define USB_OTG_DPID                    ((uint32_t)0x00018000)            /*!< Data PID */
+#define USB_OTG_DPID_0                  ((uint32_t)0x00008000)            /*!<Bit 0 */
+#define USB_OTG_DPID_1                  ((uint32_t)0x00010000)            /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS                  ((uint32_t)0x001E0000)            /*!< Packet status */
+#define USB_OTG_PKTSTS_0                ((uint32_t)0x00020000)            /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1                ((uint32_t)0x00040000)            /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2                ((uint32_t)0x00080000)            /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3                ((uint32_t)0x00100000)            /*!<Bit 3 */
+
+#define USB_OTG_EPNUM                   ((uint32_t)0x0000000F)            /*!< Endpoint number */
+#define USB_OTG_EPNUM_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_EPNUM_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_EPNUM_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_EPNUM_3                 ((uint32_t)0x00000008)            /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM                  ((uint32_t)0x01E00000)            /*!< Frame number */
+#define USB_OTG_FRMNUM_0                ((uint32_t)0x00200000)            /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1                ((uint32_t)0x00400000)            /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2                ((uint32_t)0x00800000)            /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3                ((uint32_t)0x01000000)            /*!<Bit 3 */
+
+/********************  Bit definition for OTG register  ********************/
+
+#define USB_OTG_CHNUM                   ((uint32_t)0x0000000F)            /*!< Channel number */
+#define USB_OTG_CHNUM_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_CHNUM_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_CHNUM_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_CHNUM_3                 ((uint32_t)0x00000008)            /*!<Bit 3 */
+#define USB_OTG_BCNT                    ((uint32_t)0x00007FF0)            /*!< Byte count */
+
+#define USB_OTG_DPID                    ((uint32_t)0x00018000)            /*!< Data PID */
+#define USB_OTG_DPID_0                  ((uint32_t)0x00008000)            /*!<Bit 0 */
+#define USB_OTG_DPID_1                  ((uint32_t)0x00010000)            /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS                  ((uint32_t)0x001E0000)            /*!< Packet status */
+#define USB_OTG_PKTSTS_0                ((uint32_t)0x00020000)            /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1                ((uint32_t)0x00040000)            /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2                ((uint32_t)0x00080000)            /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3                ((uint32_t)0x00100000)            /*!<Bit 3 */
+
+#define USB_OTG_EPNUM                   ((uint32_t)0x0000000F)            /*!< Endpoint number */
+#define USB_OTG_EPNUM_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_EPNUM_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_EPNUM_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_EPNUM_3                 ((uint32_t)0x00000008)            /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM                  ((uint32_t)0x01E00000)            /*!< Frame number */
+#define USB_OTG_FRMNUM_0                ((uint32_t)0x00200000)            /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1                ((uint32_t)0x00400000)            /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2                ((uint32_t)0x00800000)            /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3                ((uint32_t)0x01000000)            /*!<Bit 3 */
+
+/********************  Bit definition for USB_OTG_GRXFSIZ register  ********************/
+#define USB_OTG_GRXFSIZ_RXFD            ((uint32_t)0x0000FFFF)            /*!< RxFIFO depth */
+
+/********************  Bit definition for USB_OTG_DVBUSDIS register  ********************/
+#define USB_OTG_DVBUSDIS_VBUSDT         ((uint32_t)0x0000FFFF)            /*!< Device VBUS discharge time */
+
+/********************  Bit definition for OTG register  ********************/
+#define USB_OTG_NPTXFSA                 ((uint32_t)0x0000FFFF)            /*!< Nonperiodic transmit RAM start address */
+#define USB_OTG_NPTXFD                  ((uint32_t)0xFFFF0000)            /*!< Nonperiodic TxFIFO depth               */
+#define USB_OTG_TX0FSA                  ((uint32_t)0x0000FFFF)            /*!< Endpoint 0 transmit RAM start address  */
+#define USB_OTG_TX0FD                   ((uint32_t)0xFFFF0000)            /*!< Endpoint 0 TxFIFO depth                */
+
+/********************  Bit definition for USB_OTG_DVBUSPULSE register  ********************/
+#define USB_OTG_DVBUSPULSE_DVBUSP                  ((uint32_t)0x00000FFF)            /*!< Device VBUS pulsing time */
+
+/********************  Bit definition for USB_OTG_GNPTXSTS register  ********************/
+#define USB_OTG_GNPTXSTS_NPTXFSAV                ((uint32_t)0x0000FFFF)            /*!< Nonperiodic TxFIFO space available */
+
+#define USB_OTG_GNPTXSTS_NPTQXSAV                ((uint32_t)0x00FF0000)            /*!< Nonperiodic transmit request queue space available */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_0              ((uint32_t)0x00010000)            /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_1              ((uint32_t)0x00020000)            /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_2              ((uint32_t)0x00040000)            /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_3              ((uint32_t)0x00080000)            /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_4              ((uint32_t)0x00100000)            /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_5              ((uint32_t)0x00200000)            /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_6              ((uint32_t)0x00400000)            /*!<Bit 6 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_7              ((uint32_t)0x00800000)            /*!<Bit 7 */
+
+#define USB_OTG_GNPTXSTS_NPTXQTOP                ((uint32_t)0x7F000000)            /*!< Top of the nonperiodic transmit request queue */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_0              ((uint32_t)0x01000000)            /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_1              ((uint32_t)0x02000000)            /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_2              ((uint32_t)0x04000000)            /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_3              ((uint32_t)0x08000000)            /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_4              ((uint32_t)0x10000000)            /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_5              ((uint32_t)0x20000000)            /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_6              ((uint32_t)0x40000000)            /*!<Bit 6 */
+
+/********************  Bit definition for USB_OTG_DTHRCTL register  ********************/
+#define USB_OTG_DTHRCTL_NONISOTHREN             ((uint32_t)0x00000001)            /*!< Nonisochronous IN endpoints threshold enable */
+#define USB_OTG_DTHRCTL_ISOTHREN                ((uint32_t)0x00000002)            /*!< ISO IN endpoint threshold enable */
+
+#define USB_OTG_DTHRCTL_TXTHRLEN                ((uint32_t)0x000007FC)            /*!< Transmit threshold length */
+#define USB_OTG_DTHRCTL_TXTHRLEN_0              ((uint32_t)0x00000004)            /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_1              ((uint32_t)0x00000008)            /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_2              ((uint32_t)0x00000010)            /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_3              ((uint32_t)0x00000020)            /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_4              ((uint32_t)0x00000040)            /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_5              ((uint32_t)0x00000080)            /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_6              ((uint32_t)0x00000100)            /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_7              ((uint32_t)0x00000200)            /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_8              ((uint32_t)0x00000400)            /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_RXTHREN                 ((uint32_t)0x00010000)            /*!< Receive threshold enable */
+
+#define USB_OTG_DTHRCTL_RXTHRLEN                ((uint32_t)0x03FE0000)            /*!< Receive threshold length */
+#define USB_OTG_DTHRCTL_RXTHRLEN_0              ((uint32_t)0x00020000)            /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_1              ((uint32_t)0x00040000)            /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_2              ((uint32_t)0x00080000)            /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_3              ((uint32_t)0x00100000)            /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_4              ((uint32_t)0x00200000)            /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_5              ((uint32_t)0x00400000)            /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_6              ((uint32_t)0x00800000)            /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_7              ((uint32_t)0x01000000)            /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_8              ((uint32_t)0x02000000)            /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_ARPEN                   ((uint32_t)0x08000000)            /*!< Arbiter parking enable */
+
+/********************  Bit definition for USB_OTG_DIEPEMPMSK register  ********************/
+#define USB_OTG_DIEPEMPMSK_INEPTXFEM               ((uint32_t)0x0000FFFF)         /*!< IN EP Tx FIFO empty interrupt mask bits */
+
+/********************  Bit definition for USB_OTG_DEACHINT register  ********************/
+#define USB_OTG_DEACHINT_IEP1INT                 ((uint32_t)0x00000002)           /*!< IN endpoint 1interrupt bit   */
+#define USB_OTG_DEACHINT_OEP1INT                 ((uint32_t)0x00020000)           /*!< OUT endpoint 1 interrupt bit */
+
+/********************  Bit definition for USB_OTG_GCCFG register  ********************/
+#define USB_OTG_GCCFG_PWRDWN                 ((uint32_t)0x00010000)              /*!< Power down */
+#define USB_OTG_GCCFG_VBDEN                  ((uint32_t)0x00200000)              /*!< USB VBUS Detection Enable */
+
+/********************  Bit definition for USB_OTG_GPWRDN) register  ********************/
+#define USB_OTG_GPWRDN_ADPMEN                 ((uint32_t)0x00000001)             /*!< ADP module enable */
+#define USB_OTG_GPWRDN_ADPIF                  ((uint32_t)0x00800000)             /*!< ADP Interrupt flag */
+
+/********************  Bit definition for USB_OTG_DEACHINTMSK register  ********************/
+#define USB_OTG_DEACHINTMSK_IEP1INTM          ((uint32_t)0x00000002)            /*!< IN Endpoint 1 interrupt mask bit  */
+#define USB_OTG_DEACHINTMSK_OEP1INTM          ((uint32_t)0x00020000)            /*!< OUT Endpoint 1 interrupt mask bit */
+ 
+/********************  Bit definition for USB_OTG_CID register  ********************/
+#define USB_OTG_CID_PRODUCT_ID               ((uint32_t)0xFFFFFFFF)            /*!< Product ID field */
+
+/********************  Bit definition for USB_OTG_GLPMCFG register  ********************/
+#define  USB_OTG_GLPMCFG_LPMEN               ((uint32_t)0x00000001)            /*!< LPM support enable                                     */
+#define  USB_OTG_GLPMCFG_LPMACK              ((uint32_t)0x00000002)            /*!< LPM Token acknowledge enable                           */
+#define  USB_OTG_GLPMCFG_BESL                ((uint32_t)0x0000003C)            /*!< BESL value received with last ACKed LPM Token          */
+#define  USB_OTG_GLPMCFG_REMWAKE             ((uint32_t)0x00000040)            /*!< bRemoteWake value received with last ACKed LPM Token   */
+#define  USB_OTG_GLPMCFG_L1SSEN              ((uint32_t)0x00000080)            /*!< L1 shallow sleep enable                                */
+#define  USB_OTG_GLPMCFG_BESLTHRS            ((uint32_t)0x00000F00)            /*!< BESL threshold                                         */
+#define  USB_OTG_GLPMCFG_L1DSEN              ((uint32_t)0x00001000)            /*!< L1 deep sleep enable                                   */
+#define  USB_OTG_GLPMCFG_LPMRSP              ((uint32_t)0x00006000)            /*!< LPM response                                           */
+#define  USB_OTG_GLPMCFG_SLPSTS              ((uint32_t)0x00008000)            /*!< Port sleep status                                      */
+#define  USB_OTG_GLPMCFG_L1RSMOK             ((uint32_t)0x00010000)            /*!< Sleep State Resume OK                                  */
+#define  USB_OTG_GLPMCFG_LPMCHIDX            ((uint32_t)0x001E0000)            /*!< LPM Channel Index                                      */
+#define  USB_OTG_GLPMCFG_LPMRCNT             ((uint32_t)0x00E00000)            /*!< LPM retry count                                        */
+#define  USB_OTG_GLPMCFG_SNDLPM              ((uint32_t)0x01000000)            /*!< Send LPM transaction                                   */
+#define  USB_OTG_GLPMCFG_LPMRCNTSTS          ((uint32_t)0x0E000000)            /*!< LPM retry count status                                 */
+#define  USB_OTG_GLPMCFG_ENBESL              ((uint32_t)0x10000000)            /*!< Enable best effort service latency                     */
+
+/********************  Bit definition for USB_OTG_DIEPEACHMSK1 register  ********************/
+#define USB_OTG_DIEPEACHMSK1_XFRCM           ((uint32_t)0x00000001)            /*!< Transfer completed interrupt mask                 */
+#define USB_OTG_DIEPEACHMSK1_EPDM            ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt mask                  */
+#define USB_OTG_DIEPEACHMSK1_TOM             ((uint32_t)0x00000008)            /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK       ((uint32_t)0x00000010)            /*!< IN token received when TxFIFO empty mask          */
+#define USB_OTG_DIEPEACHMSK1_INEPNMM         ((uint32_t)0x00000020)            /*!< IN token received with EP mismatch mask           */
+#define USB_OTG_DIEPEACHMSK1_INEPNEM         ((uint32_t)0x00000040)            /*!< IN endpoint NAK effective mask                    */
+#define USB_OTG_DIEPEACHMSK1_TXFURM          ((uint32_t)0x00000100)            /*!< FIFO underrun mask                                */
+#define USB_OTG_DIEPEACHMSK1_BIM             ((uint32_t)0x00000200)            /*!< BNA interrupt mask                                */
+#define USB_OTG_DIEPEACHMSK1_NAKM            ((uint32_t)0x00002000)            /*!< NAK interrupt mask                                */
+
+/********************  Bit definition for USB_OTG_HPRT register  ********************/
+#define USB_OTG_HPRT_PCSTS                   ((uint32_t)0x00000001)            /*!< Port connect status        */
+#define USB_OTG_HPRT_PCDET                   ((uint32_t)0x00000002)            /*!< Port connect detected      */
+#define USB_OTG_HPRT_PENA                    ((uint32_t)0x00000004)            /*!< Port enable                */
+#define USB_OTG_HPRT_PENCHNG                 ((uint32_t)0x00000008)            /*!< Port enable/disable change */
+#define USB_OTG_HPRT_POCA                    ((uint32_t)0x00000010)            /*!< Port overcurrent active    */
+#define USB_OTG_HPRT_POCCHNG                 ((uint32_t)0x00000020)            /*!< Port overcurrent change    */
+#define USB_OTG_HPRT_PRES                    ((uint32_t)0x00000040)            /*!< Port resume                */
+#define USB_OTG_HPRT_PSUSP                   ((uint32_t)0x00000080)            /*!< Port suspend               */
+#define USB_OTG_HPRT_PRST                    ((uint32_t)0x00000100)            /*!< Port reset                 */
+
+#define USB_OTG_HPRT_PLSTS                   ((uint32_t)0x00000C00)            /*!< Port line status           */
+#define USB_OTG_HPRT_PLSTS_0                 ((uint32_t)0x00000400)            /*!<Bit 0 */
+#define USB_OTG_HPRT_PLSTS_1                 ((uint32_t)0x00000800)            /*!<Bit 1 */
+#define USB_OTG_HPRT_PPWR                    ((uint32_t)0x00001000)            /*!< Port power                 */
+
+#define USB_OTG_HPRT_PTCTL                   ((uint32_t)0x0001E000)            /*!< Port test control          */
+#define USB_OTG_HPRT_PTCTL_0                 ((uint32_t)0x00002000)            /*!<Bit 0 */
+#define USB_OTG_HPRT_PTCTL_1                 ((uint32_t)0x00004000)            /*!<Bit 1 */
+#define USB_OTG_HPRT_PTCTL_2                 ((uint32_t)0x00008000)            /*!<Bit 2 */
+#define USB_OTG_HPRT_PTCTL_3                 ((uint32_t)0x00010000)            /*!<Bit 3 */
+
+#define USB_OTG_HPRT_PSPD                    ((uint32_t)0x00060000)            /*!< Port speed                 */
+#define USB_OTG_HPRT_PSPD_0                  ((uint32_t)0x00020000)            /*!<Bit 0 */
+#define USB_OTG_HPRT_PSPD_1                  ((uint32_t)0x00040000)            /*!<Bit 1 */
+
+/********************  Bit definition for USB_OTG_DOEPEACHMSK1 register  ********************/
+#define USB_OTG_DOEPEACHMSK1_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed interrupt mask         */
+#define USB_OTG_DOEPEACHMSK1_EPDM                    ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt mask          */
+#define USB_OTG_DOEPEACHMSK1_TOM                     ((uint32_t)0x00000008)            /*!< Timeout condition mask                    */
+#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK               ((uint32_t)0x00000010)            /*!< IN token received when TxFIFO empty mask  */
+#define USB_OTG_DOEPEACHMSK1_INEPNMM                 ((uint32_t)0x00000020)            /*!< IN token received with EP mismatch mask   */
+#define USB_OTG_DOEPEACHMSK1_INEPNEM                 ((uint32_t)0x00000040)            /*!< IN endpoint NAK effective mask            */
+#define USB_OTG_DOEPEACHMSK1_TXFURM                  ((uint32_t)0x00000100)            /*!< OUT packet error mask                     */
+#define USB_OTG_DOEPEACHMSK1_BIM                     ((uint32_t)0x00000200)            /*!< BNA interrupt mask                        */
+#define USB_OTG_DOEPEACHMSK1_BERRM                   ((uint32_t)0x00001000)            /*!< Bubble error interrupt mask               */
+#define USB_OTG_DOEPEACHMSK1_NAKM                    ((uint32_t)0x00002000)            /*!< NAK interrupt mask                        */
+#define USB_OTG_DOEPEACHMSK1_NYETM                   ((uint32_t)0x00004000)            /*!< NYET interrupt mask                       */
+
+/********************  Bit definition for USB_OTG_HPTXFSIZ register  ********************/
+#define USB_OTG_HPTXFSIZ_PTXSA                   ((uint32_t)0x0000FFFF)            /*!< Host periodic TxFIFO start address            */
+#define USB_OTG_HPTXFSIZ_PTXFD                   ((uint32_t)0xFFFF0000)            /*!< Host periodic TxFIFO depth                    */
+
+/********************  Bit definition for USB_OTG_DIEPCTL register  ********************/
+#define USB_OTG_DIEPCTL_MPSIZ                   ((uint32_t)0x000007FF)            /*!< Maximum packet size              */
+#define USB_OTG_DIEPCTL_USBAEP                  ((uint32_t)0x00008000)            /*!< USB active endpoint              */
+#define USB_OTG_DIEPCTL_EONUM_DPID              ((uint32_t)0x00010000)            /*!< Even/odd frame                   */
+#define USB_OTG_DIEPCTL_NAKSTS                  ((uint32_t)0x00020000)            /*!< NAK status                       */
+
+#define USB_OTG_DIEPCTL_EPTYP                   ((uint32_t)0x000C0000)            /*!< Endpoint type                    */
+#define USB_OTG_DIEPCTL_EPTYP_0                 ((uint32_t)0x00040000)            /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_EPTYP_1                 ((uint32_t)0x00080000)            /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_STALL                   ((uint32_t)0x00200000)            /*!< STALL handshake                  */
+
+#define USB_OTG_DIEPCTL_TXFNUM                  ((uint32_t)0x03C00000)            /*!< TxFIFO number                    */
+#define USB_OTG_DIEPCTL_TXFNUM_0                ((uint32_t)0x00400000)            /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_TXFNUM_1                ((uint32_t)0x00800000)            /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_TXFNUM_2                ((uint32_t)0x01000000)            /*!<Bit 2 */
+#define USB_OTG_DIEPCTL_TXFNUM_3                ((uint32_t)0x02000000)            /*!<Bit 3 */
+#define USB_OTG_DIEPCTL_CNAK                    ((uint32_t)0x04000000)            /*!< Clear NAK                        */
+#define USB_OTG_DIEPCTL_SNAK                    ((uint32_t)0x08000000)            /*!< Set NAK */
+#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM          ((uint32_t)0x10000000)            /*!< Set DATA0 PID                    */
+#define USB_OTG_DIEPCTL_SODDFRM                 ((uint32_t)0x20000000)            /*!< Set odd frame                    */
+#define USB_OTG_DIEPCTL_EPDIS                   ((uint32_t)0x40000000)            /*!< Endpoint disable                 */
+#define USB_OTG_DIEPCTL_EPENA                   ((uint32_t)0x80000000)            /*!< Endpoint enable                  */
+
+/********************  Bit definition for USB_OTG_HCCHAR register  ********************/
+#define USB_OTG_HCCHAR_MPSIZ                   ((uint32_t)0x000007FF)            /*!< Maximum packet size */
+
+#define USB_OTG_HCCHAR_EPNUM                   ((uint32_t)0x00007800)            /*!< Endpoint number */
+#define USB_OTG_HCCHAR_EPNUM_0                 ((uint32_t)0x00000800)            /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPNUM_1                 ((uint32_t)0x00001000)            /*!<Bit 1 */
+#define USB_OTG_HCCHAR_EPNUM_2                 ((uint32_t)0x00002000)            /*!<Bit 2 */
+#define USB_OTG_HCCHAR_EPNUM_3                 ((uint32_t)0x00004000)            /*!<Bit 3 */
+#define USB_OTG_HCCHAR_EPDIR                   ((uint32_t)0x00008000)            /*!< Endpoint direction */
+#define USB_OTG_HCCHAR_LSDEV                   ((uint32_t)0x00020000)            /*!< Low-speed device */
+
+#define USB_OTG_HCCHAR_EPTYP                   ((uint32_t)0x000C0000)            /*!< Endpoint type */
+#define USB_OTG_HCCHAR_EPTYP_0                 ((uint32_t)0x00040000)            /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPTYP_1                 ((uint32_t)0x00080000)            /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_MC                      ((uint32_t)0x00300000)            /*!< Multi Count (MC) / Error Count (EC) */
+#define USB_OTG_HCCHAR_MC_0                    ((uint32_t)0x00100000)            /*!<Bit 0 */
+#define USB_OTG_HCCHAR_MC_1                    ((uint32_t)0x00200000)            /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_DAD                     ((uint32_t)0x1FC00000)            /*!< Device address */
+#define USB_OTG_HCCHAR_DAD_0                   ((uint32_t)0x00400000)            /*!<Bit 0 */
+#define USB_OTG_HCCHAR_DAD_1                   ((uint32_t)0x00800000)            /*!<Bit 1 */
+#define USB_OTG_HCCHAR_DAD_2                   ((uint32_t)0x01000000)            /*!<Bit 2 */
+#define USB_OTG_HCCHAR_DAD_3                   ((uint32_t)0x02000000)            /*!<Bit 3 */
+#define USB_OTG_HCCHAR_DAD_4                   ((uint32_t)0x04000000)            /*!<Bit 4 */
+#define USB_OTG_HCCHAR_DAD_5                   ((uint32_t)0x08000000)            /*!<Bit 5 */
+#define USB_OTG_HCCHAR_DAD_6                   ((uint32_t)0x10000000)            /*!<Bit 6 */
+#define USB_OTG_HCCHAR_ODDFRM                  ((uint32_t)0x20000000)            /*!< Odd frame */
+#define USB_OTG_HCCHAR_CHDIS                   ((uint32_t)0x40000000)            /*!< Channel disable */
+#define USB_OTG_HCCHAR_CHENA                   ((uint32_t)0x80000000)            /*!< Channel enable */
+
+/********************  Bit definition for USB_OTG_HCSPLT register  ********************/
+
+#define USB_OTG_HCSPLT_PRTADDR                 ((uint32_t)0x0000007F)            /*!< Port address */
+#define USB_OTG_HCSPLT_PRTADDR_0               ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_HCSPLT_PRTADDR_1               ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_HCSPLT_PRTADDR_2               ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_HCSPLT_PRTADDR_3               ((uint32_t)0x00000008)            /*!<Bit 3 */
+#define USB_OTG_HCSPLT_PRTADDR_4               ((uint32_t)0x00000010)            /*!<Bit 4 */
+#define USB_OTG_HCSPLT_PRTADDR_5               ((uint32_t)0x00000020)            /*!<Bit 5 */
+#define USB_OTG_HCSPLT_PRTADDR_6               ((uint32_t)0x00000040)            /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_HUBADDR                 ((uint32_t)0x00003F80)            /*!< Hub address */
+#define USB_OTG_HCSPLT_HUBADDR_0               ((uint32_t)0x00000080)            /*!<Bit 0 */
+#define USB_OTG_HCSPLT_HUBADDR_1               ((uint32_t)0x00000100)            /*!<Bit 1 */
+#define USB_OTG_HCSPLT_HUBADDR_2               ((uint32_t)0x00000200)            /*!<Bit 2 */
+#define USB_OTG_HCSPLT_HUBADDR_3               ((uint32_t)0x00000400)            /*!<Bit 3 */
+#define USB_OTG_HCSPLT_HUBADDR_4               ((uint32_t)0x00000800)            /*!<Bit 4 */
+#define USB_OTG_HCSPLT_HUBADDR_5               ((uint32_t)0x00001000)            /*!<Bit 5 */
+#define USB_OTG_HCSPLT_HUBADDR_6               ((uint32_t)0x00002000)            /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_XACTPOS                 ((uint32_t)0x0000C000)            /*!< XACTPOS */
+#define USB_OTG_HCSPLT_XACTPOS_0               ((uint32_t)0x00004000)            /*!<Bit 0 */
+#define USB_OTG_HCSPLT_XACTPOS_1               ((uint32_t)0x00008000)            /*!<Bit 1 */
+#define USB_OTG_HCSPLT_COMPLSPLT               ((uint32_t)0x00010000)            /*!< Do complete split */
+#define USB_OTG_HCSPLT_SPLITEN                 ((uint32_t)0x80000000)            /*!< Split enable */
+
+/********************  Bit definition for USB_OTG_HCINT register  ********************/
+#define USB_OTG_HCINT_XFRC                    ((uint32_t)0x00000001)            /*!< Transfer completed */
+#define USB_OTG_HCINT_CHH                     ((uint32_t)0x00000002)            /*!< Channel halted */
+#define USB_OTG_HCINT_AHBERR                  ((uint32_t)0x00000004)            /*!< AHB error */
+#define USB_OTG_HCINT_STALL                   ((uint32_t)0x00000008)            /*!< STALL response received interrupt */
+#define USB_OTG_HCINT_NAK                     ((uint32_t)0x00000010)            /*!< NAK response received interrupt */
+#define USB_OTG_HCINT_ACK                     ((uint32_t)0x00000020)            /*!< ACK response received/transmitted interrupt */
+#define USB_OTG_HCINT_NYET                    ((uint32_t)0x00000040)            /*!< Response received interrupt */
+#define USB_OTG_HCINT_TXERR                   ((uint32_t)0x00000080)            /*!< Transaction error */
+#define USB_OTG_HCINT_BBERR                   ((uint32_t)0x00000100)            /*!< Babble error */
+#define USB_OTG_HCINT_FRMOR                   ((uint32_t)0x00000200)            /*!< Frame overrun */
+#define USB_OTG_HCINT_DTERR                   ((uint32_t)0x00000400)            /*!< Data toggle error */
+
+/********************  Bit definition for USB_OTG_DIEPINT register  ********************/
+#define USB_OTG_DIEPINT_XFRC                    ((uint32_t)0x00000001)            /*!< Transfer completed interrupt */
+#define USB_OTG_DIEPINT_EPDISD                  ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt */
+#define USB_OTG_DIEPINT_TOC                     ((uint32_t)0x00000008)            /*!< Timeout condition */
+#define USB_OTG_DIEPINT_ITTXFE                  ((uint32_t)0x00000010)            /*!< IN token received when TxFIFO is empty */
+#define USB_OTG_DIEPINT_INEPNE                  ((uint32_t)0x00000040)            /*!< IN endpoint NAK effective */
+#define USB_OTG_DIEPINT_TXFE                    ((uint32_t)0x00000080)            /*!< Transmit FIFO empty */
+#define USB_OTG_DIEPINT_TXFIFOUDRN              ((uint32_t)0x00000100)            /*!< Transmit Fifo Underrun */
+#define USB_OTG_DIEPINT_BNA                     ((uint32_t)0x00000200)            /*!< Buffer not available interrupt */
+#define USB_OTG_DIEPINT_PKTDRPSTS               ((uint32_t)0x00000800)            /*!< Packet dropped status */
+#define USB_OTG_DIEPINT_BERR                    ((uint32_t)0x00001000)            /*!< Babble error interrupt */
+#define USB_OTG_DIEPINT_NAK                     ((uint32_t)0x00002000)            /*!< NAK interrupt */
+
+/********************  Bit definition for USB_OTG_HCINTMSK register  ********************/
+#define USB_OTG_HCINTMSK_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed mask */
+#define USB_OTG_HCINTMSK_CHHM                    ((uint32_t)0x00000002)            /*!< Channel halted mask */
+#define USB_OTG_HCINTMSK_AHBERR                  ((uint32_t)0x00000004)            /*!< AHB error */
+#define USB_OTG_HCINTMSK_STALLM                  ((uint32_t)0x00000008)            /*!< STALL response received interrupt mask */
+#define USB_OTG_HCINTMSK_NAKM                    ((uint32_t)0x00000010)            /*!< NAK response received interrupt mask */
+#define USB_OTG_HCINTMSK_ACKM                    ((uint32_t)0x00000020)            /*!< ACK response received/transmitted interrupt mask */
+#define USB_OTG_HCINTMSK_NYET                    ((uint32_t)0x00000040)            /*!< response received interrupt mask */
+#define USB_OTG_HCINTMSK_TXERRM                  ((uint32_t)0x00000080)            /*!< Transaction error mask */
+#define USB_OTG_HCINTMSK_BBERRM                  ((uint32_t)0x00000100)            /*!< Babble error mask */
+#define USB_OTG_HCINTMSK_FRMORM                  ((uint32_t)0x00000200)            /*!< Frame overrun mask */
+#define USB_OTG_HCINTMSK_DTERRM                  ((uint32_t)0x00000400)            /*!< Data toggle error mask */
+
+/********************  Bit definition for USB_OTG_DIEPTSIZ register  ********************/
+
+#define USB_OTG_DIEPTSIZ_XFRSIZ                  ((uint32_t)0x0007FFFF)            /*!< Transfer size */
+#define USB_OTG_DIEPTSIZ_PKTCNT                  ((uint32_t)0x1FF80000)            /*!< Packet count */
+#define USB_OTG_DIEPTSIZ_MULCNT                  ((uint32_t)0x60000000)            /*!< Packet count */
+/********************  Bit definition for USB_OTG_HCTSIZ register  ********************/
+#define USB_OTG_HCTSIZ_XFRSIZ                    ((uint32_t)0x0007FFFF)            /*!< Transfer size */
+#define USB_OTG_HCTSIZ_PKTCNT                    ((uint32_t)0x1FF80000)            /*!< Packet count */
+#define USB_OTG_HCTSIZ_DOPING                    ((uint32_t)0x80000000)            /*!< Do PING */
+#define USB_OTG_HCTSIZ_DPID                      ((uint32_t)0x60000000)            /*!< Data PID */
+#define USB_OTG_HCTSIZ_DPID_0                    ((uint32_t)0x20000000)            /*!<Bit 0 */
+#define USB_OTG_HCTSIZ_DPID_1                    ((uint32_t)0x40000000)            /*!<Bit 1 */
+
+/********************  Bit definition for USB_OTG_DIEPDMA register  ********************/
+#define USB_OTG_DIEPDMA_DMAADDR                  ((uint32_t)0xFFFFFFFF)            /*!< DMA address */
+
+/********************  Bit definition for USB_OTG_HCDMA register  ********************/
+#define USB_OTG_HCDMA_DMAADDR                    ((uint32_t)0xFFFFFFFF)            /*!< DMA address */
+
+/********************  Bit definition for USB_OTG_DTXFSTS register  ********************/
+#define USB_OTG_DTXFSTS_INEPTFSAV                ((uint32_t)0x0000FFFF)            /*!< IN endpoint TxFIFO space available */
+
+/********************  Bit definition for USB_OTG_DIEPTXF register  ********************/
+#define USB_OTG_DIEPTXF_INEPTXSA                 ((uint32_t)0x0000FFFF)            /*!< IN endpoint FIFOx transmit RAM start address */
+#define USB_OTG_DIEPTXF_INEPTXFD                 ((uint32_t)0xFFFF0000)            /*!< IN endpoint TxFIFO depth */
+
+/********************  Bit definition for USB_OTG_DOEPCTL register  ********************/
+#define USB_OTG_DOEPCTL_MPSIZ                     ((uint32_t)0x000007FF)            /*!< Maximum packet size */          /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_USBAEP                    ((uint32_t)0x00008000)            /*!< USB active endpoint */
+#define USB_OTG_DOEPCTL_NAKSTS                    ((uint32_t)0x00020000)            /*!< NAK status */
+#define USB_OTG_DOEPCTL_SD0PID_SEVNFRM            ((uint32_t)0x10000000)            /*!< Set DATA0 PID */
+#define USB_OTG_DOEPCTL_SODDFRM                   ((uint32_t)0x20000000)            /*!< Set odd frame */
+#define USB_OTG_DOEPCTL_EPTYP                     ((uint32_t)0x000C0000)            /*!< Endpoint type */
+#define USB_OTG_DOEPCTL_EPTYP_0                   ((uint32_t)0x00040000)            /*!<Bit 0 */
+#define USB_OTG_DOEPCTL_EPTYP_1                   ((uint32_t)0x00080000)            /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_SNPM                      ((uint32_t)0x00100000)            /*!< Snoop mode */
+#define USB_OTG_DOEPCTL_STALL                     ((uint32_t)0x00200000)            /*!< STALL handshake */
+#define USB_OTG_DOEPCTL_CNAK                      ((uint32_t)0x04000000)            /*!< Clear NAK */
+#define USB_OTG_DOEPCTL_SNAK                      ((uint32_t)0x08000000)            /*!< Set NAK */
+#define USB_OTG_DOEPCTL_EPDIS                     ((uint32_t)0x40000000)            /*!< Endpoint disable */
+#define USB_OTG_DOEPCTL_EPENA                     ((uint32_t)0x80000000)            /*!< Endpoint enable */
+
+/********************  Bit definition for USB_OTG_DOEPINT register  ********************/
+#define USB_OTG_DOEPINT_XFRC                    ((uint32_t)0x00000001)            /*!< Transfer completed interrupt */
+#define USB_OTG_DOEPINT_EPDISD                  ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt */
+#define USB_OTG_DOEPINT_STUP                    ((uint32_t)0x00000008)            /*!< SETUP phase done */
+#define USB_OTG_DOEPINT_OTEPDIS                 ((uint32_t)0x00000010)            /*!< OUT token received when endpoint disabled */
+#define USB_OTG_DOEPINT_OTEPSPR                 ((uint32_t)0x00000020)            /*!< Status Phase Received For Control Write */
+#define USB_OTG_DOEPINT_B2BSTUP                 ((uint32_t)0x00000040)            /*!< Back-to-back SETUP packets received */
+#define USB_OTG_DOEPINT_NYET                    ((uint32_t)0x00004000)            /*!< NYET interrupt */
+
+/********************  Bit definition for USB_OTG_DOEPTSIZ register  ********************/
+#define USB_OTG_DOEPTSIZ_XFRSIZ                  ((uint32_t)0x0007FFFF)            /*!< Transfer size */
+#define USB_OTG_DOEPTSIZ_PKTCNT                  ((uint32_t)0x1FF80000)            /*!< Packet count */
+
+#define USB_OTG_DOEPTSIZ_STUPCNT                 ((uint32_t)0x60000000)            /*!< SETUP packet count */
+#define USB_OTG_DOEPTSIZ_STUPCNT_0               ((uint32_t)0x20000000)            /*!<Bit 0 */
+#define USB_OTG_DOEPTSIZ_STUPCNT_1               ((uint32_t)0x40000000)            /*!<Bit 1 */
+
+/********************  Bit definition for PCGCCTL register  ********************/
+#define USB_OTG_PCGCCTL_STOPCLK                 ((uint32_t)0x00000001)            /*!< SETUP packet count */
+#define USB_OTG_PCGCCTL_GATECLK                 ((uint32_t)0x00000002)            /*!<Bit 0 */
+#define USB_OTG_PCGCCTL_PHYSUSP                 ((uint32_t)0x00000010)            /*!<Bit 1 */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+
+/******************************* ADC Instances ********************************/
+#define IS_ADC_ALL_INSTANCE(__INSTANCE__) (((__INSTANCE__) == ADC1) || \
+                                       ((__INSTANCE__) == ADC2) || \
+                                       ((__INSTANCE__) == ADC3))
+
+/******************************* CAN Instances ********************************/
+#define IS_CAN_ALL_INSTANCE(__INSTANCE__) (((__INSTANCE__) == CAN1) || \
+                                       ((__INSTANCE__) == CAN2))
+ 
+/******************************* CRC Instances ********************************/
+#define IS_CRC_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == CRC)
+
+/******************************* DAC Instances ********************************/
+#define IS_DAC_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == DAC)
+
+/******************************* DCMI Instances *******************************/
+#define IS_DCMI_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == DCMI)
+
+
+/******************************* DMA2D Instances *******************************/
+#define IS_DMA2D_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == DMA2D)
+
+/******************************** DMA Instances *******************************/
+#define IS_DMA_STREAM_ALL_INSTANCE(__INSTANCE__) (((__INSTANCE__) == DMA1_Stream0) || \
+                                              ((__INSTANCE__) == DMA1_Stream1) || \
+                                              ((__INSTANCE__) == DMA1_Stream2) || \
+                                              ((__INSTANCE__) == DMA1_Stream3) || \
+                                              ((__INSTANCE__) == DMA1_Stream4) || \
+                                              ((__INSTANCE__) == DMA1_Stream5) || \
+                                              ((__INSTANCE__) == DMA1_Stream6) || \
+                                              ((__INSTANCE__) == DMA1_Stream7) || \
+                                              ((__INSTANCE__) == DMA2_Stream0) || \
+                                              ((__INSTANCE__) == DMA2_Stream1) || \
+                                              ((__INSTANCE__) == DMA2_Stream2) || \
+                                              ((__INSTANCE__) == DMA2_Stream3) || \
+                                              ((__INSTANCE__) == DMA2_Stream4) || \
+                                              ((__INSTANCE__) == DMA2_Stream5) || \
+                                              ((__INSTANCE__) == DMA2_Stream6) || \
+                                              ((__INSTANCE__) == DMA2_Stream7))
+
+/******************************* GPIO Instances *******************************/
+#define IS_GPIO_ALL_INSTANCE(__INSTANCE__) (((__INSTANCE__) == GPIOA) || \
+                                        ((__INSTANCE__) == GPIOB) || \
+                                        ((__INSTANCE__) == GPIOC) || \
+                                        ((__INSTANCE__) == GPIOD) || \
+                                        ((__INSTANCE__) == GPIOE) || \
+                                        ((__INSTANCE__) == GPIOF) || \
+                                        ((__INSTANCE__) == GPIOG) || \
+                                        ((__INSTANCE__) == GPIOH) || \
+                                        ((__INSTANCE__) == GPIOI) || \
+                                        ((__INSTANCE__) == GPIOJ) || \
+                                        ((__INSTANCE__) == GPIOK))
+										
+#define IS_GPIO_AF_INSTANCE(__INSTANCE__)   (((__INSTANCE__) == GPIOA) || \
+                                        ((__INSTANCE__) == GPIOB) || \
+                                        ((__INSTANCE__) == GPIOC) || \
+                                        ((__INSTANCE__) == GPIOD) || \
+                                        ((__INSTANCE__) == GPIOE) || \
+                                        ((__INSTANCE__) == GPIOF) || \
+                                        ((__INSTANCE__) == GPIOG) || \
+                                        ((__INSTANCE__) == GPIOH) || \
+                                        ((__INSTANCE__) == GPIOI) || \
+                                        ((__INSTANCE__) == GPIOJ) || \
+                                        ((__INSTANCE__) == GPIOK))
+
+/****************************** CEC Instances *********************************/
+#define IS_CEC_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == CEC)
+
+/****************************** QSPI Instances *********************************/
+#define IS_QSPI_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == QUADSPI)
+
+                                        
+/******************************** I2C Instances *******************************/
+#define IS_I2C_ALL_INSTANCE(__INSTANCE__) (((__INSTANCE__) == I2C1) || \
+                                       ((__INSTANCE__) == I2C2) || \
+                                       ((__INSTANCE__) == I2C3) || \
+                                       ((__INSTANCE__) == I2C4))
+
+/******************************** I2S Instances *******************************/
+#define IS_I2S_ALL_INSTANCE(__INSTANCE__)  (((__INSTANCE__) == SPI1) || \
+                                    ((__INSTANCE__) == SPI2) || \
+                                    ((__INSTANCE__) == SPI3))
+
+/******************************* LPTIM Instances ********************************/
+#define IS_LPTIM_INSTANCE(__INSTANCE__) ((__INSTANCE__) == LPTIM1)
+
+/****************************** LTDC Instances ********************************/
+#define IS_LTDC_ALL_INSTANCE(__INSTANCE__)  ((__INSTANCE__) == LTDC)
+
+
+/******************************* RNG Instances ********************************/
+#define IS_RNG_ALL_INSTANCE(__INSTANCE__)  ((__INSTANCE__) == RNG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(__INSTANCE__)  ((__INSTANCE__) == RTC)
+
+/******************************* SAI Instances ********************************/
+#define IS_SAI_BLOCK_PERIPH(__PERIPH__) (((__PERIPH__) == SAI1_Block_A) || \
+                                     ((__PERIPH__) == SAI1_Block_B) || \
+                                     ((__PERIPH__) == SAI2_Block_A) || \
+                                     ((__PERIPH__) == SAI2_Block_B))
+
+
+/******************************** SDMMC Instances *******************************/
+#define IS_SDMMC_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == SDMMC1)
+
+/****************************** SPDIFRX Instances *********************************/
+#define IS_SPDIFRX_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == SPDIFRX)
+                                     
+/******************************** SPI Instances *******************************/
+#define IS_SPI_ALL_INSTANCE(__INSTANCE__) (((__INSTANCE__) == SPI1) || \
+                                       ((__INSTANCE__) == SPI2) || \
+                                       ((__INSTANCE__) == SPI3) || \
+                                       ((__INSTANCE__) == SPI4) || \
+                                       ((__INSTANCE__) == SPI5) || \
+                                       ((__INSTANCE__) == SPI6))
+
+/****************** TIM Instances : All supported instances *******************/
+#define IS_TIM_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1)   || \
+                                   ((__INSTANCE__) == TIM2)   || \
+                                   ((__INSTANCE__) == TIM3)   || \
+                                   ((__INSTANCE__) == TIM4)   || \
+                                   ((__INSTANCE__) == TIM5)   || \
+                                   ((__INSTANCE__) == TIM6)   || \
+                                   ((__INSTANCE__) == TIM7)   || \
+                                   ((__INSTANCE__) == TIM8)   || \
+                                   ((__INSTANCE__) == TIM9)   || \
+                                   ((__INSTANCE__) == TIM10)  || \
+                                   ((__INSTANCE__) == TIM11)  || \
+                                   ((__INSTANCE__) == TIM12)  || \
+                                   ((__INSTANCE__) == TIM13)  || \
+                                   ((__INSTANCE__) == TIM14))
+
+/************* TIM Instances : at least 1 capture/compare channel *************/
+#define IS_TIM_CC1_INSTANCE(__INSTANCE__)   (((__INSTANCE__) == TIM1)  || \
+                                         ((__INSTANCE__) == TIM2)  || \
+                                         ((__INSTANCE__) == TIM3)  || \
+                                         ((__INSTANCE__) == TIM4)  || \
+                                         ((__INSTANCE__) == TIM5)  || \
+                                         ((__INSTANCE__) == TIM8)  || \
+                                         ((__INSTANCE__) == TIM9)  || \
+                                         ((__INSTANCE__) == TIM10) || \
+                                         ((__INSTANCE__) == TIM11) || \
+                                         ((__INSTANCE__) == TIM12) || \
+                                         ((__INSTANCE__) == TIM13) || \
+                                         ((__INSTANCE__) == TIM14))
+
+/************ TIM Instances : at least 2 capture/compare channels *************/
+#define IS_TIM_CC2_INSTANCE(__INSTANCE__)   (((__INSTANCE__) == TIM1)  || \
+                                         ((__INSTANCE__) == TIM2)  || \
+                                         ((__INSTANCE__) == TIM3)  || \
+                                         ((__INSTANCE__) == TIM4)  || \
+                                         ((__INSTANCE__) == TIM5)  || \
+                                         ((__INSTANCE__) == TIM8)  || \
+                                         ((__INSTANCE__) == TIM9)  || \
+                                         ((__INSTANCE__) == TIM12))
+
+/************ TIM Instances : at least 3 capture/compare channels *************/
+#define IS_TIM_CC3_INSTANCE(__INSTANCE__)   (((__INSTANCE__) == TIM1) || \
+                                         ((__INSTANCE__) == TIM2) || \
+                                         ((__INSTANCE__) == TIM3) || \
+                                         ((__INSTANCE__) == TIM4) || \
+                                         ((__INSTANCE__) == TIM5) || \
+                                         ((__INSTANCE__) == TIM8))
+
+/************ TIM Instances : at least 4 capture/compare channels *************/
+#define IS_TIM_CC4_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
+                                       ((__INSTANCE__) == TIM2) || \
+                                       ((__INSTANCE__) == TIM3) || \
+                                       ((__INSTANCE__) == TIM4) || \
+                                       ((__INSTANCE__) == TIM5) || \
+                                       ((__INSTANCE__) == TIM8))
+                                       
+/****************** TIM Instances : supporting combined 3-phase PWM mode ******/
+#define IS_TIM_COMBINED3PHASEPWM_INSTANCE(__INSTANCE__) \
+                                       (((__INSTANCE__) == TIM1)    || \
+                                        ((__INSTANCE__) == TIM8))
+
+/****************** TIM Instances : supporting OCxREF clear *******************/
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(__INSTANCE__)\
+                                  (((__INSTANCE__) == TIM1)    || \
+                                   ((__INSTANCE__) == TIM2)    || \
+                                   ((__INSTANCE__) == TIM3)    || \
+                                   ((__INSTANCE__) == TIM4)    || \
+                                   ((__INSTANCE__) == TIM8))
+
+/****************** TIM Instances : supporting external clock mode 1 for TIX inputs*/
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(__INSTANCE__)\
+                                                 (((__INSTANCE__) == TIM1)    || \
+                                                  ((__INSTANCE__) == TIM2)    || \
+                                                  ((__INSTANCE__) == TIM3)    || \
+                                                  ((__INSTANCE__) == TIM4)    || \
+                                                  ((__INSTANCE__) == TIM5)    || \
+                                                  ((__INSTANCE__) == TIM8))
+ 
+/****************** TIM Instances : supporting internal trigger inputs(ITRX) *******/
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(__INSTANCE__)\
+                                                   (((__INSTANCE__) == TIM1)    || \
+                                                    ((__INSTANCE__) == TIM2)    || \
+                                                    ((__INSTANCE__) == TIM3)    || \
+                                                    ((__INSTANCE__) == TIM4)    || \
+                                                    ((__INSTANCE__) == TIM5)    || \
+                                                    ((__INSTANCE__) == TIM8))
+/****************** TIM Instances : at least 5 capture/compare channels *******/
+#define IS_TIM_CC5_INSTANCE(__INSTANCE__)\
+  (((__INSTANCE__) == TIM1)    || \
+   ((__INSTANCE__) == TIM8) )
+
+/****************** TIM Instances : at least 6 capture/compare channels *******/
+#define IS_TIM_CC6_INSTANCE(__INSTANCE__)\
+  (((__INSTANCE__) == TIM1)    || \
+   ((__INSTANCE__) == TIM8))
+
+                                       
+/******************** TIM Instances : Advanced-control timers *****************/
+#define IS_TIM_ADVANCED_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
+                                            ((__INSTANCE__) == TIM8))
+
+/****************** TIM Instances : supporting 2 break inputs *****************/
+#define IS_TIM_BREAK_INSTANCE(__INSTANCE__)\
+  (((__INSTANCE__) == TIM1)    || \
+   ((__INSTANCE__) == TIM8))
+   
+/******************* TIM Instances : Timer input XOR function *****************/
+#define IS_TIM_XOR_INSTANCE(__INSTANCE__)   (((__INSTANCE__) == TIM1) || \
+                                         ((__INSTANCE__) == TIM2) || \
+                                         ((__INSTANCE__) == TIM3) || \
+                                         ((__INSTANCE__) == TIM4) || \
+                                         ((__INSTANCE__) == TIM5) || \
+                                         ((__INSTANCE__) == TIM8))
+
+/****************** TIM Instances : DMA requests generation (UDE) *************/
+#define IS_TIM_DMA_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
+                                       ((__INSTANCE__) == TIM2) || \
+                                       ((__INSTANCE__) == TIM3) || \
+                                       ((__INSTANCE__) == TIM4) || \
+                                       ((__INSTANCE__) == TIM5) || \
+                                       ((__INSTANCE__) == TIM6) || \
+                                       ((__INSTANCE__) == TIM7) || \
+                                       ((__INSTANCE__) == TIM8))
+
+/************ TIM Instances : DMA requests generation (CCxDE) *****************/
+#define IS_TIM_DMA_CC_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
+                                          ((__INSTANCE__) == TIM2) || \
+                                          ((__INSTANCE__) == TIM3) || \
+                                          ((__INSTANCE__) == TIM4) || \
+                                          ((__INSTANCE__) == TIM5) || \
+                                          ((__INSTANCE__) == TIM8))
+
+/************ TIM Instances : DMA requests generation (COMDE) *****************/
+#define IS_TIM_CCDMA_INSTANCE(__INSTANCE__)  (((__INSTANCE__) == TIM1) || \
+                                          ((__INSTANCE__) == TIM2) || \
+                                          ((__INSTANCE__) == TIM3) || \
+                                          ((__INSTANCE__) == TIM4) || \
+                                          ((__INSTANCE__) == TIM5) || \
+                                          ((__INSTANCE__) == TIM8)) 
+
+/******************** TIM Instances : DMA burst feature ***********************/
+#define IS_TIM_DMABURST_INSTANCE(__INSTANCE__)  (((__INSTANCE__) == TIM1) || \
+                                             ((__INSTANCE__) == TIM2) || \
+                                             ((__INSTANCE__) == TIM3) || \
+                                             ((__INSTANCE__) == TIM4) || \
+                                             ((__INSTANCE__) == TIM5) || \
+                                             ((__INSTANCE__) == TIM8))
+
+/****** TIM Instances : master mode available (TIMx_CR2.MMS available )********/
+#define IS_TIM_MASTER_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
+                                          ((__INSTANCE__) == TIM2) || \
+                                          ((__INSTANCE__) == TIM3) || \
+                                          ((__INSTANCE__) == TIM4) || \
+                                          ((__INSTANCE__) == TIM5) || \
+                                          ((__INSTANCE__) == TIM6) || \
+                                          ((__INSTANCE__) == TIM7) || \
+                                          ((__INSTANCE__) == TIM8) || \
+                                          ((__INSTANCE__) == TIM13) || \
+                                          ((__INSTANCE__) == TIM14))
+
+/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/
+#define IS_TIM_SLAVE_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
+                                         ((__INSTANCE__) == TIM2) || \
+                                         ((__INSTANCE__) == TIM3) || \
+                                         ((__INSTANCE__) == TIM4) || \
+                                         ((__INSTANCE__) == TIM5) || \
+                                         ((__INSTANCE__) == TIM8) || \
+                                         ((__INSTANCE__) == TIM9) || \
+                                         ((__INSTANCE__) == TIM12))
+
+/********************** TIM Instances : 32 bit Counter ************************/
+#define IS_TIM_32B_COUNTER_INSTANCE(__INSTANCE__)(((__INSTANCE__) == TIM2) || \
+                                              ((__INSTANCE__) == TIM5))
+
+/***************** TIM Instances : external trigger input available ************/
+#define IS_TIM_ETR_INSTANCE(__INSTANCE__)  (((__INSTANCE__) == TIM1) || \
+                                        ((__INSTANCE__) == TIM2) || \
+                                        ((__INSTANCE__) == TIM3) || \
+                                        ((__INSTANCE__) == TIM4) || \
+                                        ((__INSTANCE__) == TIM5) || \
+                                        ((__INSTANCE__) == TIM8))
+
+/****************** TIM Instances : remapping capability **********************/
+#define IS_TIM_REMAP_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM2)  || \
+                                         ((__INSTANCE__) == TIM5)  || \
+                                         ((__INSTANCE__) == TIM11))
+
+/******************* TIM Instances : output(s) available **********************/
+#define IS_TIM_CCX_INSTANCE(__INSTANCE__, __CHANNEL__) \
+    ((((__INSTANCE__) == TIM1) &&                  \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_3) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM2) &&                   \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_3) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM3) &&                   \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_3) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM4) &&                   \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_3) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM5) &&                   \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_3) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM8) &&                   \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_3) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM9) &&                   \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM10) &&                  \
+     (((__CHANNEL__) == TIM_CHANNEL_1)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM11) &&                  \
+     (((__CHANNEL__) == TIM_CHANNEL_1)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM12) &&                  \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM13) &&                  \
+     (((__CHANNEL__) == TIM_CHANNEL_1)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM14) &&                  \
+     (((__CHANNEL__) == TIM_CHANNEL_1))))
+
+/************ TIM Instances : complementary output(s) available ***************/
+#define IS_TIM_CCXN_INSTANCE(__INSTANCE__, __CHANNEL__) \
+   ((((__INSTANCE__) == TIM1) &&                    \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||           \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||           \
+      ((__CHANNEL__) == TIM_CHANNEL_3)))            \
+    ||                                          \
+    (((__INSTANCE__) == TIM8) &&                    \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||           \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||           \
+      ((__CHANNEL__) == TIM_CHANNEL_3))))
+
+/****************** TIM Instances : supporting ADC triggering through TRGO2 ***/
+#define IS_TIM_TRGO2_INSTANCE(__INSTANCE__)\
+  (((__INSTANCE__) == TIM1)    || \
+   ((__INSTANCE__) == TIM8) )
+
+/****************** TIM Instances : supporting synchronization ****************/
+#define IS_TIM_SYNCHRO_INSTANCE(__INSTANCE__)\
+    (((__INSTANCE__) == TIM1)    || \
+     ((__INSTANCE__) == TIM2)    || \
+     ((__INSTANCE__) == TIM3)    || \
+     ((__INSTANCE__) == TIM4)    || \
+     ((__INSTANCE__) == TIM5)    || \
+     ((__INSTANCE__) == TIM6)    || \
+     ((__INSTANCE__) == TIM7)    || \
+     ((__INSTANCE__) == TIM8))  
+      
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(__INSTANCE__) (((__INSTANCE__) == USART1) || \
+                                     ((__INSTANCE__) == USART2) || \
+                                     ((__INSTANCE__) == USART3) || \
+                                     ((__INSTANCE__) == USART6))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(__INSTANCE__) (((__INSTANCE__) == USART1) || \
+                                    ((__INSTANCE__) == USART2) || \
+                                    ((__INSTANCE__) == USART3) || \
+                                    ((__INSTANCE__) == UART4)  || \
+                                    ((__INSTANCE__) == UART5)  || \
+                                    ((__INSTANCE__) == USART6) || \
+                                    ((__INSTANCE__) == UART7)  || \
+                                    ((__INSTANCE__) == UART8))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(__INSTANCE__) (((__INSTANCE__) == USART1) || \
+                                    ((__INSTANCE__) == USART2) || \
+                                    ((__INSTANCE__) == USART3) || \
+                                    ((__INSTANCE__) == UART4)  || \
+                                    ((__INSTANCE__) == UART5)  || \
+                                    ((__INSTANCE__) == USART6) || \
+                                    ((__INSTANCE__) == UART7)  || \
+                                    ((__INSTANCE__) == UART8))
+
+/********************* UART Instances : Smart card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(__INSTANCE__) (((__INSTANCE__) == USART1) || \
+                                         ((__INSTANCE__) == USART2) || \
+                                         ((__INSTANCE__) == USART3) || \
+                                         ((__INSTANCE__) == USART6))
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(__INSTANCE__) (((__INSTANCE__) == USART1) || \
+                                    ((__INSTANCE__) == USART2) || \
+                                    ((__INSTANCE__) == USART3) || \
+                                    ((__INSTANCE__) == UART4)  || \
+                                    ((__INSTANCE__) == UART5)  || \
+                                    ((__INSTANCE__) == USART6) || \
+                                    ((__INSTANCE__) == UART7)  || \
+                                    ((__INSTANCE__) == UART8))     
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(__INSTANCE__)  ((__INSTANCE__) == IWDG)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(__INSTANCE__)  ((__INSTANCE__) == WWDG)
+
+
+/******************************************************************************/
+/*  For a painless codes migration between the STM32F7xx device product       */
+/*  lines, the aliases defined below are put in place to overcome the         */
+/*  differences in the interrupt handlers and IRQn definitions.               */
+/*  No need to update developed interrupt code when moving across             */
+/*  product lines within the same STM32F7 Family                              */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define HASH_RNG_IRQn              RNG_IRQn
+
+/* Aliases for __IRQHandler */
+#define HASH_RNG_IRQHandler        RNG_IRQHandler
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F746xx_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/stm32f7xx.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,197 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx.h
+  * @author  MCD Application Team
+  * @version V1.0.2
+  * @date    21-September-2015
+  * @brief   CMSIS STM32F7xx Device Peripheral Access Layer Header File.           
+  *            
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The STM32F7xx device used in the target application
+  *              - To use or not the peripheral’s drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral’s registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f7xx
+  * @{
+  */
+    
+#ifndef __STM32F7xx_H
+#define __STM32F7xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+  
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined  (STM32F7)
+#define STM32F7
+#endif /* STM32F7 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+   application 
+  */
+#if !defined (STM32F756xx) && !defined (STM32F746xx) && !defined (STM32F745xx)
+  /* #define STM32F756xx */   /*!< STM32F756VG, STM32F756ZG, STM32F756ZG, STM32F756IG, STM32F756BG,
+                                   STM32F756NG Devices */
+#define STM32F746xx           /*!< STM32F746VE, STM32F746VG, STM32F746ZE, STM32F746ZG, STM32F746IE, STM32F746IG,
+                                   STM32F746BE, STM32F746BG, STM32F746NE, STM32F746NG Devices */
+  /* #define STM32F745xx */   /*!< STM32F745VE, STM32F745VG, STM32F745ZG, STM32F745ZE, STM32F745IE, STM32F745IG Devices */
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V1.0.1
+  */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION_MAIN   (0x01) /*!< [31:24] main version */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION_SUB1   (0x00) /*!< [23:16] sub1 version */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION_SUB2   (0x01) /*!< [15:8]  sub2 version */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
+#define __STM32F7xx_CMSIS_DEVICE_VERSION        ((__STM32F7xx_CMSIS_DEVICE_VERSION_MAIN << 24)\
+                                                |(__STM32F7xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\
+                                                |(__STM32F7xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\
+                                                |(__STM32F7xx_CMSIS_DEVICE_VERSION))
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+#if defined(STM32F756xx)
+  #include "stm32f756xx.h"
+#elif defined(STM32F746xx)
+  #include "stm32f746xx.h"
+#elif defined(STM32F745xx)
+  #include "stm32f745xx.h"
+#else
+ #error "Please select first the target STM32F7xx device used in your application (in stm32f7xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */ 
+typedef enum 
+{
+  RESET = 0, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum 
+{
+  ERROR = 0, 
+  SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+  * @}
+  */
+  
+/** @addtogroup Exported_macro
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
+
+/**
+  * @}
+  */
+
+#ifdef USE_HAL_DRIVER
+  #include "stm32f7xx_hal_conf.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F7xx_H */
+
+/**
+  * @}
+  */
+
+  /**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/stm32f7xx_hal_conf.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,421 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   HAL configuration template file. 
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f7xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CONF_H
+#define __STM32F7xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED  
+#define HAL_ADC_MODULE_ENABLED  
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED  
+#define HAL_CRC_MODULE_ENABLED  
+#define HAL_CRYP_MODULE_ENABLED  
+#define HAL_DAC_MODULE_ENABLED  
+#define HAL_DCMI_MODULE_ENABLED 
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED 
+#define HAL_ETH_MODULE_ENABLED 
+#define HAL_FLASH_MODULE_ENABLED 
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED  
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED   
+#define HAL_IWDG_MODULE_ENABLED 
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED 
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED   
+#define HAL_RCC_MODULE_ENABLED 
+#define HAL_RNG_MODULE_ENABLED   
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED   
+#define HAL_SD_MODULE_ENABLED  
+#define HAL_SPDIFRX_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED   
+#define HAL_TIM_MODULE_ENABLED   
+#define HAL_UART_MODULE_ENABLED 
+#define HAL_USART_MODULE_ENABLED 
+#define HAL_IRDA_MODULE_ENABLED 
+#define HAL_SMARTCARD_MODULE_ENABLED 
+#define HAL_WWDG_MODULE_ENABLED  
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)200)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE) 
+ #define LSI_VALUE  ((uint32_t)32000)       /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source 
+  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)0x0F) /*!< tick interrupt priority */
+#define  USE_RTOS                     0
+#define  PREFETCH_ENABLE              1
+#define  ART_ACCLERATOR_ENABLE        1 /* To enable instruction cache and prefetch */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1 */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2
+#define MAC_ADDR1   0
+#define MAC_ADDR2   0
+#define MAC_ADDR3   0
+#define MAC_ADDR4   0
+#define MAC_ADDR5   0
+
+/* Definition of the Ethernet driver buffers size and count */   
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    ((uint32_t)4)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    ((uint32_t)4)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/ 
+#define DP83848_PHY_ADDRESS             0x01
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
+#define PHY_RESET_DELAY                 ((uint32_t)0x000000FF)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
+
+#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
+#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
+ 
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+  
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x10)    /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x11)    /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x12)    /*!< MII Interrupt Status and Misc. Control Register */
+ 
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f7xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f7xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f7xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+   
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f7xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f7xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f7xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+  #include "stm32f7xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f7xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f7xx_hal_cryp.h" 
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f7xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f7xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f7xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f7xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f7xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+ 
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f7xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f7xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f7xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f7xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */      
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f7xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f7xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f7xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f7xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f7xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f7xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f7xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f7xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f7xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f7xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f7xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f7xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f7xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f7xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f7xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f7xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f7xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f7xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f7xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f7xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f7xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f7xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+   
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CONF_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/system_stm32f7xx.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,851 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f7xx.c
+  * @author  MCD Application Team
+  * @version V1.0.2
+  * @date    21-September-2015
+  * @brief   CMSIS Cortex-M7 Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from 
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f7xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * This file configures the system clock as follows:
+  *-----------------------------------------------------------------------------
+  * System clock source       | [1] PLL_HSE_XTAL      | [2] PLL_HSI if [1] fails
+  *                           | (external 25MHz xtal) | (internal 16MHz clock)
+  *-----------------------------------------------------------------------------
+  * SYSCLK(MHz)               | 216                   | 216
+  *-----------------------------------------------------------------------------
+  * AHBCLK (MHz)              | 216                   | 216
+  *-----------------------------------------------------------------------------
+  * APB1CLK (MHz)             |  54                   |  54
+  *-----------------------------------------------------------------------------
+  * APB2CLK (MHz)             | 108                   | 108
+  *-----------------------------------------------------------------------------
+  * USB capable               | YES                   |  NO
+  * with 48 MHz precise clock |                       |
+  *-----------------------------------------------------------------------------  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f7xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F7xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f7xx.h"
+#include "hal_tick.h"
+
+HAL_StatusTypeDef HAL_Init(void);
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM mounted
+     on STMicroelectronics EVAL/Discovery boards as data memory  */
+/*!< In case of EVAL/Discovery’s LCD use in application code, the DATA_IN_ExtSDRAM define
+     need to be added  in the project preprocessor to avoid SDRAM multiple configuration
+     (the LCD uses SDRAM as frame buffer, and its configuration is done by the BSP_SDRAM_Init()) */
+/* #define DATA_IN_ExtSRAM */ 
+/* #define DATA_IN_ExtSDRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field. 
+                                   This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Private_Macros
+  * @{
+  */
+
+/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
+#define USE_PLL_HSE_EXTC (0) /* Use external clock --> NOT USED ON THIS BOARD */ 
+#define USE_PLL_HSE_XTAL (1) /* Use external xtal */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Private_Variables
+  * @{
+  */
+
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+uint32_t SystemCoreClock = HSI_VALUE;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Private_FunctionPrototypes
+  * @{
+  */
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
+#endif
+
+uint8_t SetSysClock_PLL_HSI(void);
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemFrequency variable.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+  /* Reset the RCC clock configuration to the default reset state ------------*/
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset CFGR register */
+  RCC->CFGR = 0x00000000;
+
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset PLLCFGR register */
+  RCC->PLLCFGR = 0x24003010;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Disable all interrupts */
+  RCC->CIR = 0x00000000;
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  SystemInit_ExtMemCtl(); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = RAMDTCM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+
+  /* Configure the Cube driver */
+  SystemCoreClock = HSI_VALUE; // At this stage the HSI is used as system clock
+  HAL_Init();
+
+  // Enable CPU L1-Cache
+  SCB_EnableICache();
+  SCB_EnableDCache();
+
+  /* Configure the System clock source, PLL Multiplier and Divider factors,
+     AHB/APBx prescalers and Flash settings */
+  SetSysClock();
+  
+  /* Reset the timer to avoid issues after the RAM initialization */
+  TIM_MST_RESET_ON;
+  TIM_MST_RESET_OFF;  
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f7xx.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f7xx.h file (default value
+  *              25 MHz), user has to ensure that HSE_VALUE is same as the real
+  *              frequency of the crystal used. Otherwise, this function may
+  *              have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *     
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+  
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock source */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock source */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock source */
+
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+         SYSCLK = PLL_VCO / PLL_P
+         */    
+      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      
+      if (pllsource != 0)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);      
+      }
+
+      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+      SystemCoreClock = pllvco/pllp;
+      break;
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK frequency --------------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK frequency */
+  SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f7xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0;
+#if defined (DATA_IN_ExtSDRAM) && defined (DATA_IN_ExtSRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register uint32_t index;
+
+  /* Enable GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface 
+      clock */
+  RCC->AHB1ENR |= 0x000001F8;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;  
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x55550545;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 50 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x55554145;  
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCC000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xFF800FFF;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x55400555;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CC00CC;
+  GPIOG->AFR[1]  = 0xC00000CC;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x80220AAA;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0x80320FFF;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x40110555;
+
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x55550450;
+
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00145555;
+
+/*-- FMC Configuration ------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[4]  = 0x00001091;
+  FMC_Bank1->BTCR[5]  = 0x00110212;
+  FMC_Bank1E->BWTR[4] = 0x0FFFFFFF;
+
+  /* Configure and enable SDRAM bank1 */
+  FMC_Bank5_6->SDCR[0] = 0x000019E5;
+  FMC_Bank5_6->SDTR[0] = 0x01116361;   
+
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+  FMC_Bank5_6->SDCMR = 0x000000F3;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+  FMC_Bank5_6->SDCMR = 0x00046014;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x00000603<<1));
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);  
+  
+#elif defined (DATA_IN_ExtSDRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register uint32_t index;
+
+  /* Enable GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface 
+      clock */
+  RCC->AHB1ENR |= 0x000001F8;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x000000CC;
+  GPIOD->AFR[1]  = 0xCC000CCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xA02A000A;
+  /* Configure PDx pins speed to 50 MHz */  
+  GPIOD->OSPEEDR = 0xA02A000A;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x50150005;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00000CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA800A;
+  /* Configure PEx pins speed to 50 MHz */ 
+  GPIOE->OSPEEDR = 0xAAAA800A;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x55554005;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCC000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x55400555;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CC00CC;
+  GPIOG->AFR[1]  = 0xC000000C;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x80020A0A;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0x80020A0A;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x40010505;
+  
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x55550450;
+  
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00145555;
+  
+/*-- FMC Configuration ------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable SDRAM bank1 */
+  FMC_Bank5_6->SDCR[0] = 0x000019E5;
+  FMC_Bank5_6->SDTR[0] = 0x01116361;      
+  
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+  FMC_Bank5_6->SDCMR = 0x000000F3;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+  FMC_Bank5_6->SDCMR = 0x00046014;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x00000603<<1));
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+  
+#elif defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHB1ENR   |= 0x00000078;
+  
+    /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x55550545;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x55554145;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 100 MHz */ 
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x55000555;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x000000C0;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x00200AAA;
+  /* Configure PGx pins speed to 100 MHz */ 
+  GPIOG->OSPEEDR = 0x00300FFF;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00100555;
+  
+/*-- FMC/FSMC Configuration --------------------------------------------------*/                                                                               
+  /* Enable the FMC/FSMC interface clock */
+  RCC->AHB3ENR         |= 0x00000001;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[4]  = 0x00001091;
+  FMC_Bank1->BTCR[5]  = 0x00110212;
+  FMC_Bank1E->BWTR[4] = 0x0FFFFFFF;  
+
+#endif /* DATA_IN_ExtSRAM */
+
+  (void)(tmp);
+}
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+  * @brief  Configures the System clock source, PLL Multiplier and Divider factors,
+  *               AHB/APBx prescalers and Flash settings
+  * @note   This function should be called only once the RCC clock configuration  
+  *         is reset to the default reset state (done in SystemInit() function).             
+  * @param  None
+  * @retval None
+  */
+void SetSysClock(void)
+{
+  /* 1- Try to start with HSE and external clock */
+#if USE_PLL_HSE_EXTC != 0
+  if (SetSysClock_PLL_HSE(1) == 0)
+#endif
+  {
+    /* 2- If fail try to start with HSE and external xtal */
+    #if USE_PLL_HSE_XTAL != 0
+    if (SetSysClock_PLL_HSE(0) == 0)
+    #endif
+    {
+      /* 3- If fail start with HSI clock */
+      if (SetSysClock_PLL_HSI() == 0)
+      {
+        while(1)
+        {
+          // [TODO] Put something here to tell the user that a problem occured...
+        }
+      }
+    }
+  }
+  
+  // Output clock on MCO2 pin(PC9) for debugging purpose
+  // Can be visualized on uSD card CN3 connector pin 8
+  //HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4); // 216 MHz / 4 = 54 MHz
+}
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+/******************************************************************************/
+/*            PLL (clocked by HSE) used as System clock source                */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
+{
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+
+  // Enable power clock  
+  __PWR_CLK_ENABLE();
+  
+  // Enable HSE oscillator and activate PLL with HSE as source
+  RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSE;
+  if (bypass == 0)
+  {
+    RCC_OscInitStruct.HSEState          = RCC_HSE_ON; /* External xtal on OSC_IN/OSC_OUT */
+  }
+  else
+  {
+    RCC_OscInitStruct.HSEState          = RCC_HSE_BYPASS; /* External clock on OSC_IN */
+  }
+  // Warning: this configuration is for a 25 MHz xtal clock only
+  RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM            = 25;            // VCO input clock = 1 MHz (25 MHz / 25)
+  RCC_OscInitStruct.PLL.PLLN            = 432;           // VCO output clock = 432 MHz (1 MHz * 432)
+  RCC_OscInitStruct.PLL.PLLP            = RCC_PLLP_DIV2; // PLLCLK = 216 MHz (432 MHz / 2)
+  RCC_OscInitStruct.PLL.PLLQ            = 9;             // USB clock = 48 MHz (432 MHz / 9) --> OK for USB
+  
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    return 0; // FAIL
+  }
+
+  // Activate the OverDrive to reach the 216 MHz Frequency
+  if (HAL_PWREx_EnableOverDrive() != HAL_OK)
+  {
+    return 0; // FAIL
+  }
+  
+  // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
+  RCC_ClkInitStruct.ClockType      = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+  RCC_ClkInitStruct.SYSCLKSource   = RCC_SYSCLKSOURCE_PLLCLK; // 216 MHz
+  RCC_ClkInitStruct.AHBCLKDivider  = RCC_SYSCLK_DIV1;         // 216 MHz
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;           //  54 MHz
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;           // 108 MHz
+  
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK)
+  {
+    return 0; // FAIL
+  }
+
+  return 1; // OK
+}
+#endif
+
+/******************************************************************************/
+/*            PLL (clocked by HSI) used as System clock source                */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSI(void)
+{
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+
+  // Enable CPU L1-Cache
+  SCB_EnableICache();
+  SCB_EnableDCache();
+
+  // Enable power clock  
+  __PWR_CLK_ENABLE();
+ 
+  // Enable HSI oscillator and activate PLL with HSI as source
+  RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
+  RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
+  RCC_OscInitStruct.HSICalibrationValue = 16;
+  RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;   
+  RCC_OscInitStruct.PLL.PLLM            = 16;            // VCO input clock = 1 MHz (16 MHz / 16)
+  RCC_OscInitStruct.PLL.PLLN            = 432;           // VCO output clock = 432 MHz (1 MHz * 432)
+  RCC_OscInitStruct.PLL.PLLP            = RCC_PLLP_DIV2; // PLLCLK = 216 MHz (432 MHz / 2)
+  RCC_OscInitStruct.PLL.PLLQ            = 9;             // USB clock = 48 MHz (432 MHz / 9) --> OK for USB
+  
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    return 0; // FAIL
+  }
+ 
+  // Activate the OverDrive to reach the 216 MHz Frequency
+  if (HAL_PWREx_EnableOverDrive() != HAL_OK)
+  {
+    return 0; // FAIL
+  }
+  
+  // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
+  RCC_ClkInitStruct.ClockType      = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+  RCC_ClkInitStruct.SYSCLKSource   = RCC_SYSCLKSOURCE_PLLCLK; // 216 MHz
+  RCC_ClkInitStruct.AHBCLKDivider  = RCC_SYSCLK_DIV1;         // 216 MHz
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;           //  54 MHz
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;           // 108 MHz
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK)
+  {
+    return 0; // FAIL
+  }
+
+  return 1; // OK
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/system_stm32f7xx.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,123 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f7xx.h
+  * @author  MCD Application Team
+  * @version V1.0.2
+  * @date    21-September-2015
+  * @brief   CMSIS Cortex-M7 Device System Source File for STM32F7xx devices.       
+  ******************************************************************************  
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f7xx_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F7XX_H
+#define __SYSTEM_STM32F7XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F7xx_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F7xx_System_Exported_types
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+    */
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F7XX_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_MICRO/startup_stm32f746zg.S	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,463 @@
+;******************** (C) COPYRIGHT 2015 STMicroelectronics ********************
+;* File Name          : startup_stm32f746xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.0.2
+;* Date               : 21-September-2015
+;* Description        : STM32F746xx devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM7 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+; Amount of memory (in bytes) allocated for Stack
+; Tailor this value to your application needs
+; <h> Stack Configuration
+;   <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Stack_Size      EQU     0x00000400
+
+                AREA    STACK, NOINIT, READWRITE, ALIGN=3
+                EXPORT  __initial_sp
+                
+Stack_Mem       SPACE   Stack_Size
+__initial_sp    EQU     0x20050000 ; Top of RAM
+
+
+; <h> Heap Configuration
+;   <o>  Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+; </h>
+
+Heap_Size       EQU     0x00000400
+
+                AREA    HEAP, NOINIT, READWRITE, ALIGN=3
+                EXPORT  __heap_base
+                EXPORT  __heap_limit
+                
+__heap_base
+Heap_Mem        SPACE   Heap_Size
+__heap_limit    EQU (__initial_sp - Stack_Size)
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                   ; Window WatchDog                                        
+                DCD     PVD_IRQHandler                    ; PVD through EXTI Line detection                        
+                DCD     TAMP_STAMP_IRQHandler             ; Tamper and TimeStamps through the EXTI line            
+                DCD     RTC_WKUP_IRQHandler               ; RTC Wakeup through the EXTI line                       
+                DCD     FLASH_IRQHandler                  ; FLASH                                           
+                DCD     RCC_IRQHandler                    ; RCC                                             
+                DCD     EXTI0_IRQHandler                  ; EXTI Line0                                             
+                DCD     EXTI1_IRQHandler                  ; EXTI Line1                                             
+                DCD     EXTI2_IRQHandler                  ; EXTI Line2                                             
+                DCD     EXTI3_IRQHandler                  ; EXTI Line3                                             
+                DCD     EXTI4_IRQHandler                  ; EXTI Line4                                             
+                DCD     DMA1_Stream0_IRQHandler           ; DMA1 Stream 0                                   
+                DCD     DMA1_Stream1_IRQHandler           ; DMA1 Stream 1                                   
+                DCD     DMA1_Stream2_IRQHandler           ; DMA1 Stream 2                                   
+                DCD     DMA1_Stream3_IRQHandler           ; DMA1 Stream 3                                   
+                DCD     DMA1_Stream4_IRQHandler           ; DMA1 Stream 4                                   
+                DCD     DMA1_Stream5_IRQHandler           ; DMA1 Stream 5                                   
+                DCD     DMA1_Stream6_IRQHandler           ; DMA1 Stream 6                                   
+                DCD     ADC_IRQHandler                    ; ADC1, ADC2 and ADC3s                            
+                DCD     CAN1_TX_IRQHandler                ; CAN1 TX                                                
+                DCD     CAN1_RX0_IRQHandler               ; CAN1 RX0                                               
+                DCD     CAN1_RX1_IRQHandler               ; CAN1 RX1                                               
+                DCD     CAN1_SCE_IRQHandler               ; CAN1 SCE                                               
+                DCD     EXTI9_5_IRQHandler                ; External Line[9:5]s                                    
+                DCD     TIM1_BRK_TIM9_IRQHandler          ; TIM1 Break and TIM9                   
+                DCD     TIM1_UP_TIM10_IRQHandler          ; TIM1 Update and TIM10                 
+                DCD     TIM1_TRG_COM_TIM11_IRQHandler     ; TIM1 Trigger and Commutation and TIM11
+                DCD     TIM1_CC_IRQHandler                ; TIM1 Capture Compare                                   
+                DCD     TIM2_IRQHandler                   ; TIM2                                            
+                DCD     TIM3_IRQHandler                   ; TIM3                                            
+                DCD     TIM4_IRQHandler                   ; TIM4                                            
+                DCD     I2C1_EV_IRQHandler                ; I2C1 Event                                             
+                DCD     I2C1_ER_IRQHandler                ; I2C1 Error                                             
+                DCD     I2C2_EV_IRQHandler                ; I2C2 Event                                             
+                DCD     I2C2_ER_IRQHandler                ; I2C2 Error                                               
+                DCD     SPI1_IRQHandler                   ; SPI1                                            
+                DCD     SPI2_IRQHandler                   ; SPI2                                            
+                DCD     USART1_IRQHandler                 ; USART1                                          
+                DCD     USART2_IRQHandler                 ; USART2                                          
+                DCD     USART3_IRQHandler                 ; USART3                                          
+                DCD     EXTI15_10_IRQHandler              ; External Line[15:10]s                                  
+                DCD     RTC_Alarm_IRQHandler              ; RTC Alarm (A and B) through EXTI Line                  
+                DCD     OTG_FS_WKUP_IRQHandler            ; USB OTG FS Wakeup through EXTI line                        
+                DCD     TIM8_BRK_TIM12_IRQHandler         ; TIM8 Break and TIM12                  
+                DCD     TIM8_UP_TIM13_IRQHandler          ; TIM8 Update and TIM13                 
+                DCD     TIM8_TRG_COM_TIM14_IRQHandler     ; TIM8 Trigger and Commutation and TIM14
+                DCD     TIM8_CC_IRQHandler                ; TIM8 Capture Compare                                   
+                DCD     DMA1_Stream7_IRQHandler           ; DMA1 Stream7                                           
+                DCD     FMC_IRQHandler                    ; FMC                                             
+                DCD     SDMMC1_IRQHandler                  ; SDMMC1                                            
+                DCD     TIM5_IRQHandler                   ; TIM5                                            
+                DCD     SPI3_IRQHandler                   ; SPI3                                            
+                DCD     UART4_IRQHandler                  ; UART4                                           
+                DCD     UART5_IRQHandler                  ; UART5                                           
+                DCD     TIM6_DAC_IRQHandler               ; TIM6 and DAC1&2 underrun errors                   
+                DCD     TIM7_IRQHandler                   ; TIM7                   
+                DCD     DMA2_Stream0_IRQHandler           ; DMA2 Stream 0                                   
+                DCD     DMA2_Stream1_IRQHandler           ; DMA2 Stream 1                                   
+                DCD     DMA2_Stream2_IRQHandler           ; DMA2 Stream 2                                   
+                DCD     DMA2_Stream3_IRQHandler           ; DMA2 Stream 3                                   
+                DCD     DMA2_Stream4_IRQHandler           ; DMA2 Stream 4                                   
+                DCD     ETH_IRQHandler                    ; Ethernet                                        
+                DCD     ETH_WKUP_IRQHandler               ; Ethernet Wakeup through EXTI line                      
+                DCD     CAN2_TX_IRQHandler                ; CAN2 TX                                                
+                DCD     CAN2_RX0_IRQHandler               ; CAN2 RX0                                               
+                DCD     CAN2_RX1_IRQHandler               ; CAN2 RX1                                               
+                DCD     CAN2_SCE_IRQHandler               ; CAN2 SCE                                               
+                DCD     OTG_FS_IRQHandler                 ; USB OTG FS                                      
+                DCD     DMA2_Stream5_IRQHandler           ; DMA2 Stream 5                                   
+                DCD     DMA2_Stream6_IRQHandler           ; DMA2 Stream 6                                   
+                DCD     DMA2_Stream7_IRQHandler           ; DMA2 Stream 7                                   
+                DCD     USART6_IRQHandler                 ; USART6                                           
+                DCD     I2C3_EV_IRQHandler                ; I2C3 event                                             
+                DCD     I2C3_ER_IRQHandler                ; I2C3 error                                             
+                DCD     OTG_HS_EP1_OUT_IRQHandler         ; USB OTG HS End Point 1 Out                      
+                DCD     OTG_HS_EP1_IN_IRQHandler          ; USB OTG HS End Point 1 In                       
+                DCD     OTG_HS_WKUP_IRQHandler            ; USB OTG HS Wakeup through EXTI                         
+                DCD     OTG_HS_IRQHandler                 ; USB OTG HS                                      
+                DCD     DCMI_IRQHandler                   ; DCMI                                            
+                DCD     0                                 ; Reserved                                     
+                DCD     RNG_IRQHandler                    ; Hash and Rng
+                DCD     FPU_IRQHandler                    ; FPU
+                DCD     UART7_IRQHandler                  ; UART7
+                DCD     UART8_IRQHandler                  ; UART8
+                DCD     SPI4_IRQHandler                   ; SPI4
+                DCD     SPI5_IRQHandler                   ; SPI5
+                DCD     SPI6_IRQHandler                   ; SPI6
+                DCD     SAI1_IRQHandler                   ; SAI1
+                DCD     LTDC_IRQHandler                   ; LTDC
+                DCD     LTDC_ER_IRQHandler                ; LTDC error
+                DCD     DMA2D_IRQHandler                  ; DMA2D
+                DCD     SAI2_IRQHandler                   ; SAI2
+                DCD     QUADSPI_IRQHandler                ; QUADSPI
+                DCD     LPTIM1_IRQHandler                 ; LPTIM1
+                DCD     CEC_IRQHandler                    ; HDMI_CEC
+                DCD     I2C4_EV_IRQHandler                ; I2C4 Event                                             
+                DCD     I2C4_ER_IRQHandler                ; I2C4 Error 
+                DCD     SPDIF_RX_IRQHandler               ; SPDIF_RX
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+        IMPORT  SystemInit
+        IMPORT  __main
+
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                   [WEAK]                                        
+                EXPORT  PVD_IRQHandler                    [WEAK]                      
+                EXPORT  TAMP_STAMP_IRQHandler             [WEAK]         
+                EXPORT  RTC_WKUP_IRQHandler               [WEAK]                     
+                EXPORT  FLASH_IRQHandler                  [WEAK]                                         
+                EXPORT  RCC_IRQHandler                    [WEAK]                                            
+                EXPORT  EXTI0_IRQHandler                  [WEAK]                                            
+                EXPORT  EXTI1_IRQHandler                  [WEAK]                                             
+                EXPORT  EXTI2_IRQHandler                  [WEAK]                                            
+                EXPORT  EXTI3_IRQHandler                  [WEAK]                                           
+                EXPORT  EXTI4_IRQHandler                  [WEAK]                                            
+                EXPORT  DMA1_Stream0_IRQHandler           [WEAK]                                
+                EXPORT  DMA1_Stream1_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream2_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream3_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream4_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream5_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream6_IRQHandler           [WEAK]                                   
+                EXPORT  ADC_IRQHandler                    [WEAK]                         
+                EXPORT  CAN1_TX_IRQHandler                [WEAK]                                                
+                EXPORT  CAN1_RX0_IRQHandler               [WEAK]                                               
+                EXPORT  CAN1_RX1_IRQHandler               [WEAK]                                                
+                EXPORT  CAN1_SCE_IRQHandler               [WEAK]                                                
+                EXPORT  EXTI9_5_IRQHandler                [WEAK]                                    
+                EXPORT  TIM1_BRK_TIM9_IRQHandler          [WEAK]                  
+                EXPORT  TIM1_UP_TIM10_IRQHandler          [WEAK]                
+                EXPORT  TIM1_TRG_COM_TIM11_IRQHandler     [WEAK] 
+                EXPORT  TIM1_CC_IRQHandler                [WEAK]                                   
+                EXPORT  TIM2_IRQHandler                   [WEAK]                                            
+                EXPORT  TIM3_IRQHandler                   [WEAK]                                            
+                EXPORT  TIM4_IRQHandler                   [WEAK]                                            
+                EXPORT  I2C1_EV_IRQHandler                [WEAK]                                             
+                EXPORT  I2C1_ER_IRQHandler                [WEAK]                                             
+                EXPORT  I2C2_EV_IRQHandler                [WEAK]                                            
+                EXPORT  I2C2_ER_IRQHandler                [WEAK]                                               
+                EXPORT  SPI1_IRQHandler                   [WEAK]                                           
+                EXPORT  SPI2_IRQHandler                   [WEAK]                                            
+                EXPORT  USART1_IRQHandler                 [WEAK]                                          
+                EXPORT  USART2_IRQHandler                 [WEAK]                                          
+                EXPORT  USART3_IRQHandler                 [WEAK]                                         
+                EXPORT  EXTI15_10_IRQHandler              [WEAK]                                  
+                EXPORT  RTC_Alarm_IRQHandler              [WEAK]                  
+                EXPORT  OTG_FS_WKUP_IRQHandler            [WEAK]                        
+                EXPORT  TIM8_BRK_TIM12_IRQHandler         [WEAK]                 
+                EXPORT  TIM8_UP_TIM13_IRQHandler          [WEAK]                 
+                EXPORT  TIM8_TRG_COM_TIM14_IRQHandler     [WEAK] 
+                EXPORT  TIM8_CC_IRQHandler                [WEAK]                                   
+                EXPORT  DMA1_Stream7_IRQHandler           [WEAK]                                          
+                EXPORT  FMC_IRQHandler                    [WEAK]                                             
+                EXPORT  SDMMC1_IRQHandler                 [WEAK]                                             
+                EXPORT  TIM5_IRQHandler                   [WEAK]                                             
+                EXPORT  SPI3_IRQHandler                   [WEAK]                                             
+                EXPORT  UART4_IRQHandler                  [WEAK]                                            
+                EXPORT  UART5_IRQHandler                  [WEAK]                                            
+                EXPORT  TIM6_DAC_IRQHandler               [WEAK]                   
+                EXPORT  TIM7_IRQHandler                   [WEAK]                    
+                EXPORT  DMA2_Stream0_IRQHandler           [WEAK]                                  
+                EXPORT  DMA2_Stream1_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream2_IRQHandler           [WEAK]                                    
+                EXPORT  DMA2_Stream3_IRQHandler           [WEAK]                                    
+                EXPORT  DMA2_Stream4_IRQHandler           [WEAK]                                 
+                EXPORT  ETH_IRQHandler                    [WEAK]                                         
+                EXPORT  ETH_WKUP_IRQHandler               [WEAK]                     
+                EXPORT  CAN2_TX_IRQHandler                [WEAK]                                               
+                EXPORT  CAN2_RX0_IRQHandler               [WEAK]                                               
+                EXPORT  CAN2_RX1_IRQHandler               [WEAK]                                               
+                EXPORT  CAN2_SCE_IRQHandler               [WEAK]                                               
+                EXPORT  OTG_FS_IRQHandler                 [WEAK]                                       
+                EXPORT  DMA2_Stream5_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream6_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream7_IRQHandler           [WEAK]                                   
+                EXPORT  USART6_IRQHandler                 [WEAK]                                           
+                EXPORT  I2C3_EV_IRQHandler                [WEAK]                                              
+                EXPORT  I2C3_ER_IRQHandler                [WEAK]                                              
+                EXPORT  OTG_HS_EP1_OUT_IRQHandler         [WEAK]                      
+                EXPORT  OTG_HS_EP1_IN_IRQHandler          [WEAK]                      
+                EXPORT  OTG_HS_WKUP_IRQHandler            [WEAK]                        
+                EXPORT  OTG_HS_IRQHandler                 [WEAK]                                      
+                EXPORT  DCMI_IRQHandler                   [WEAK]                                             
+                EXPORT  RNG_IRQHandler                    [WEAK]
+                EXPORT  FPU_IRQHandler                    [WEAK]
+                EXPORT  UART7_IRQHandler                  [WEAK]
+                EXPORT  UART8_IRQHandler                  [WEAK]
+                EXPORT  SPI4_IRQHandler                   [WEAK]
+                EXPORT  SPI5_IRQHandler                   [WEAK]
+                EXPORT  SPI6_IRQHandler                   [WEAK]
+                EXPORT  SAI1_IRQHandler                   [WEAK]
+                EXPORT  LTDC_IRQHandler                   [WEAK]
+                EXPORT  LTDC_ER_IRQHandler                [WEAK]
+                EXPORT  DMA2D_IRQHandler                  [WEAK]
+                EXPORT  SAI2_IRQHandler                   [WEAK]   
+                EXPORT  QUADSPI_IRQHandler                [WEAK]
+                EXPORT  LPTIM1_IRQHandler                 [WEAK]
+                EXPORT  CEC_IRQHandler                    [WEAK]   
+                EXPORT  I2C4_EV_IRQHandler                [WEAK]
+                EXPORT  I2C4_ER_IRQHandler                [WEAK]
+                EXPORT  SPDIF_RX_IRQHandler               [WEAK]
+
+WWDG_IRQHandler                                                       
+PVD_IRQHandler                                      
+TAMP_STAMP_IRQHandler                  
+RTC_WKUP_IRQHandler                                
+FLASH_IRQHandler                                                       
+RCC_IRQHandler                                                            
+EXTI0_IRQHandler                                                          
+EXTI1_IRQHandler                                                           
+EXTI2_IRQHandler                                                          
+EXTI3_IRQHandler                                                         
+EXTI4_IRQHandler                                                          
+DMA1_Stream0_IRQHandler                                       
+DMA1_Stream1_IRQHandler                                          
+DMA1_Stream2_IRQHandler                                          
+DMA1_Stream3_IRQHandler                                          
+DMA1_Stream4_IRQHandler                                          
+DMA1_Stream5_IRQHandler                                          
+DMA1_Stream6_IRQHandler                                          
+ADC_IRQHandler                                         
+CAN1_TX_IRQHandler                                                            
+CAN1_RX0_IRQHandler                                                          
+CAN1_RX1_IRQHandler                                                           
+CAN1_SCE_IRQHandler                                                           
+EXTI9_5_IRQHandler                                                
+TIM1_BRK_TIM9_IRQHandler                        
+TIM1_UP_TIM10_IRQHandler                      
+TIM1_TRG_COM_TIM11_IRQHandler  
+TIM1_CC_IRQHandler                                               
+TIM2_IRQHandler                                                           
+TIM3_IRQHandler                                                           
+TIM4_IRQHandler                                                           
+I2C1_EV_IRQHandler                                                         
+I2C1_ER_IRQHandler                                                         
+I2C2_EV_IRQHandler                                                        
+I2C2_ER_IRQHandler                                                           
+SPI1_IRQHandler                                                          
+SPI2_IRQHandler                                                           
+USART1_IRQHandler                                                       
+USART2_IRQHandler                                                       
+USART3_IRQHandler                                                      
+EXTI15_10_IRQHandler                                            
+RTC_Alarm_IRQHandler                            
+OTG_FS_WKUP_IRQHandler                                
+TIM8_BRK_TIM12_IRQHandler                      
+TIM8_UP_TIM13_IRQHandler                       
+TIM8_TRG_COM_TIM14_IRQHandler  
+TIM8_CC_IRQHandler                                               
+DMA1_Stream7_IRQHandler                                                 
+FMC_IRQHandler                                                            
+SDMMC1_IRQHandler                                                            
+TIM5_IRQHandler                                                            
+SPI3_IRQHandler                                                            
+UART4_IRQHandler                                                          
+UART5_IRQHandler                                                          
+TIM6_DAC_IRQHandler                            
+TIM7_IRQHandler                              
+DMA2_Stream0_IRQHandler                                         
+DMA2_Stream1_IRQHandler                                          
+DMA2_Stream2_IRQHandler                                           
+DMA2_Stream3_IRQHandler                                           
+DMA2_Stream4_IRQHandler                                        
+ETH_IRQHandler                                                         
+ETH_WKUP_IRQHandler                                
+CAN2_TX_IRQHandler                                                           
+CAN2_RX0_IRQHandler                                                          
+CAN2_RX1_IRQHandler                                                          
+CAN2_SCE_IRQHandler                                                          
+OTG_FS_IRQHandler                                                    
+DMA2_Stream5_IRQHandler                                          
+DMA2_Stream6_IRQHandler                                          
+DMA2_Stream7_IRQHandler                                          
+USART6_IRQHandler                                                        
+I2C3_EV_IRQHandler                                                          
+I2C3_ER_IRQHandler                                                          
+OTG_HS_EP1_OUT_IRQHandler                           
+OTG_HS_EP1_IN_IRQHandler                            
+OTG_HS_WKUP_IRQHandler                                
+OTG_HS_IRQHandler                                                   
+DCMI_IRQHandler                                                            
+RNG_IRQHandler
+FPU_IRQHandler  
+UART7_IRQHandler                  
+UART8_IRQHandler                  
+SPI4_IRQHandler                   
+SPI5_IRQHandler                   
+SPI6_IRQHandler                   
+SAI1_IRQHandler                   
+LTDC_IRQHandler                   
+LTDC_ER_IRQHandler                 
+DMA2D_IRQHandler   
+SAI2_IRQHandler        
+QUADSPI_IRQHandler
+LPTIM1_IRQHandler
+CEC_IRQHandler
+I2C4_EV_IRQHandler
+I2C4_ER_IRQHandler
+SPDIF_RX_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+                END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_MICRO/stm32f746zg.sct	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2016, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+;     this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+;    this list of conditions and the following disclaimer in the documentation
+;    and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+;    may be used to endorse or promote products derived from this software
+;    without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F746ZG: 1024 KB FLASH (0x100000) + 320 KB SRAM (0x50000)
+LR_IROM1 0x08000000 0x100000  {    ; load region size_region
+
+  ER_IROM1 0x08000000 0x100000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+
+  ; Total: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM
+  RW_IRAM1 (0x20000000+0x1C8) (0x50000-0x1C8)  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_MICRO/sys.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model, 
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif 
+
+#include <rt_misc.h>
+#include <stdint.h>
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+    uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+    uint32_t sp_limit = __current_sp();
+
+    zi_limit = (zi_limit + 7) & ~0x7;    // ensure zi_limit is 8-byte aligned
+
+    struct __initial_stackheap r;
+    r.heap_base = zi_limit;
+    r.heap_limit = sp_limit;
+    return r;
+}
+
+#ifdef __cplusplus
+}
+#endif 

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_STD/startup_stm32f746zg.S	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,436 @@
+;******************** (C) COPYRIGHT 2015 STMicroelectronics ********************
+;* File Name          : startup_stm32f746xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.0.2
+;* Date               : 21-September-2015
+;* Description        : STM32F746xx devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM7 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
+
+__initial_sp    EQU     0x20050000 ; Top of RAM
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+__Vectors       DCD     __initial_sp               ; Top of Stack
+                DCD     Reset_Handler              ; Reset Handler
+                DCD     NMI_Handler                ; NMI Handler
+                DCD     HardFault_Handler          ; Hard Fault Handler
+                DCD     MemManage_Handler          ; MPU Fault Handler
+                DCD     BusFault_Handler           ; Bus Fault Handler
+                DCD     UsageFault_Handler         ; Usage Fault Handler
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     0                          ; Reserved
+                DCD     SVC_Handler                ; SVCall Handler
+                DCD     DebugMon_Handler           ; Debug Monitor Handler
+                DCD     0                          ; Reserved
+                DCD     PendSV_Handler             ; PendSV Handler
+                DCD     SysTick_Handler            ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                   ; Window WatchDog                                        
+                DCD     PVD_IRQHandler                    ; PVD through EXTI Line detection                        
+                DCD     TAMP_STAMP_IRQHandler             ; Tamper and TimeStamps through the EXTI line            
+                DCD     RTC_WKUP_IRQHandler               ; RTC Wakeup through the EXTI line                       
+                DCD     FLASH_IRQHandler                  ; FLASH                                           
+                DCD     RCC_IRQHandler                    ; RCC                                             
+                DCD     EXTI0_IRQHandler                  ; EXTI Line0                                             
+                DCD     EXTI1_IRQHandler                  ; EXTI Line1                                             
+                DCD     EXTI2_IRQHandler                  ; EXTI Line2                                             
+                DCD     EXTI3_IRQHandler                  ; EXTI Line3                                             
+                DCD     EXTI4_IRQHandler                  ; EXTI Line4                                             
+                DCD     DMA1_Stream0_IRQHandler           ; DMA1 Stream 0                                   
+                DCD     DMA1_Stream1_IRQHandler           ; DMA1 Stream 1                                   
+                DCD     DMA1_Stream2_IRQHandler           ; DMA1 Stream 2                                   
+                DCD     DMA1_Stream3_IRQHandler           ; DMA1 Stream 3                                   
+                DCD     DMA1_Stream4_IRQHandler           ; DMA1 Stream 4                                   
+                DCD     DMA1_Stream5_IRQHandler           ; DMA1 Stream 5                                   
+                DCD     DMA1_Stream6_IRQHandler           ; DMA1 Stream 6                                   
+                DCD     ADC_IRQHandler                    ; ADC1, ADC2 and ADC3s                            
+                DCD     CAN1_TX_IRQHandler                ; CAN1 TX                                                
+                DCD     CAN1_RX0_IRQHandler               ; CAN1 RX0                                               
+                DCD     CAN1_RX1_IRQHandler               ; CAN1 RX1                                               
+                DCD     CAN1_SCE_IRQHandler               ; CAN1 SCE                                               
+                DCD     EXTI9_5_IRQHandler                ; External Line[9:5]s                                    
+                DCD     TIM1_BRK_TIM9_IRQHandler          ; TIM1 Break and TIM9                   
+                DCD     TIM1_UP_TIM10_IRQHandler          ; TIM1 Update and TIM10                 
+                DCD     TIM1_TRG_COM_TIM11_IRQHandler     ; TIM1 Trigger and Commutation and TIM11
+                DCD     TIM1_CC_IRQHandler                ; TIM1 Capture Compare                                   
+                DCD     TIM2_IRQHandler                   ; TIM2                                            
+                DCD     TIM3_IRQHandler                   ; TIM3                                            
+                DCD     TIM4_IRQHandler                   ; TIM4                                            
+                DCD     I2C1_EV_IRQHandler                ; I2C1 Event                                             
+                DCD     I2C1_ER_IRQHandler                ; I2C1 Error                                             
+                DCD     I2C2_EV_IRQHandler                ; I2C2 Event                                             
+                DCD     I2C2_ER_IRQHandler                ; I2C2 Error                                               
+                DCD     SPI1_IRQHandler                   ; SPI1                                            
+                DCD     SPI2_IRQHandler                   ; SPI2                                            
+                DCD     USART1_IRQHandler                 ; USART1                                          
+                DCD     USART2_IRQHandler                 ; USART2                                          
+                DCD     USART3_IRQHandler                 ; USART3                                          
+                DCD     EXTI15_10_IRQHandler              ; External Line[15:10]s                                  
+                DCD     RTC_Alarm_IRQHandler              ; RTC Alarm (A and B) through EXTI Line                  
+                DCD     OTG_FS_WKUP_IRQHandler            ; USB OTG FS Wakeup through EXTI line                        
+                DCD     TIM8_BRK_TIM12_IRQHandler         ; TIM8 Break and TIM12                  
+                DCD     TIM8_UP_TIM13_IRQHandler          ; TIM8 Update and TIM13                 
+                DCD     TIM8_TRG_COM_TIM14_IRQHandler     ; TIM8 Trigger and Commutation and TIM14
+                DCD     TIM8_CC_IRQHandler                ; TIM8 Capture Compare                                   
+                DCD     DMA1_Stream7_IRQHandler           ; DMA1 Stream7                                           
+                DCD     FMC_IRQHandler                    ; FMC                                             
+                DCD     SDMMC1_IRQHandler                  ; SDMMC1                                            
+                DCD     TIM5_IRQHandler                   ; TIM5                                            
+                DCD     SPI3_IRQHandler                   ; SPI3                                            
+                DCD     UART4_IRQHandler                  ; UART4                                           
+                DCD     UART5_IRQHandler                  ; UART5                                           
+                DCD     TIM6_DAC_IRQHandler               ; TIM6 and DAC1&2 underrun errors                   
+                DCD     TIM7_IRQHandler                   ; TIM7                   
+                DCD     DMA2_Stream0_IRQHandler           ; DMA2 Stream 0                                   
+                DCD     DMA2_Stream1_IRQHandler           ; DMA2 Stream 1                                   
+                DCD     DMA2_Stream2_IRQHandler           ; DMA2 Stream 2                                   
+                DCD     DMA2_Stream3_IRQHandler           ; DMA2 Stream 3                                   
+                DCD     DMA2_Stream4_IRQHandler           ; DMA2 Stream 4                                   
+                DCD     ETH_IRQHandler                    ; Ethernet                                        
+                DCD     ETH_WKUP_IRQHandler               ; Ethernet Wakeup through EXTI line                      
+                DCD     CAN2_TX_IRQHandler                ; CAN2 TX                                                
+                DCD     CAN2_RX0_IRQHandler               ; CAN2 RX0                                               
+                DCD     CAN2_RX1_IRQHandler               ; CAN2 RX1                                               
+                DCD     CAN2_SCE_IRQHandler               ; CAN2 SCE                                               
+                DCD     OTG_FS_IRQHandler                 ; USB OTG FS                                      
+                DCD     DMA2_Stream5_IRQHandler           ; DMA2 Stream 5                                   
+                DCD     DMA2_Stream6_IRQHandler           ; DMA2 Stream 6                                   
+                DCD     DMA2_Stream7_IRQHandler           ; DMA2 Stream 7                                   
+                DCD     USART6_IRQHandler                 ; USART6                                           
+                DCD     I2C3_EV_IRQHandler                ; I2C3 event                                             
+                DCD     I2C3_ER_IRQHandler                ; I2C3 error                                             
+                DCD     OTG_HS_EP1_OUT_IRQHandler         ; USB OTG HS End Point 1 Out                      
+                DCD     OTG_HS_EP1_IN_IRQHandler          ; USB OTG HS End Point 1 In                       
+                DCD     OTG_HS_WKUP_IRQHandler            ; USB OTG HS Wakeup through EXTI                         
+                DCD     OTG_HS_IRQHandler                 ; USB OTG HS                                      
+                DCD     DCMI_IRQHandler                   ; DCMI                                            
+                DCD     0                                 ; Reserved                                     
+                DCD     RNG_IRQHandler                    ; Hash and Rng
+                DCD     FPU_IRQHandler                    ; FPU
+                DCD     UART7_IRQHandler                  ; UART7
+                DCD     UART8_IRQHandler                  ; UART8
+                DCD     SPI4_IRQHandler                   ; SPI4
+                DCD     SPI5_IRQHandler                   ; SPI5
+                DCD     SPI6_IRQHandler                   ; SPI6
+                DCD     SAI1_IRQHandler                   ; SAI1
+                DCD     LTDC_IRQHandler                   ; LTDC
+                DCD     LTDC_ER_IRQHandler                ; LTDC error
+                DCD     DMA2D_IRQHandler                  ; DMA2D
+                DCD     SAI2_IRQHandler                   ; SAI2
+                DCD     QUADSPI_IRQHandler                ; QUADSPI
+                DCD     LPTIM1_IRQHandler                 ; LPTIM1
+                DCD     CEC_IRQHandler                    ; HDMI_CEC
+                DCD     I2C4_EV_IRQHandler                ; I2C4 Event                                             
+                DCD     I2C4_ER_IRQHandler                ; I2C4 Error 
+                DCD     SPDIF_RX_IRQHandler               ; SPDIF_RX
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler             [WEAK]
+        IMPORT  SystemInit
+        IMPORT  __main
+
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler          [WEAK]
+                B       .
+                ENDP
+MemManage_Handler\
+                PROC
+                EXPORT  MemManage_Handler          [WEAK]
+                B       .
+                ENDP
+BusFault_Handler\
+                PROC
+                EXPORT  BusFault_Handler           [WEAK]
+                B       .
+                ENDP
+UsageFault_Handler\
+                PROC
+                EXPORT  UsageFault_Handler         [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                [WEAK]
+                B       .
+                ENDP
+DebugMon_Handler\
+                PROC
+                EXPORT  DebugMon_Handler           [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler             [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler            [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                   [WEAK]                                        
+                EXPORT  PVD_IRQHandler                    [WEAK]                      
+                EXPORT  TAMP_STAMP_IRQHandler             [WEAK]         
+                EXPORT  RTC_WKUP_IRQHandler               [WEAK]                     
+                EXPORT  FLASH_IRQHandler                  [WEAK]                                         
+                EXPORT  RCC_IRQHandler                    [WEAK]                                            
+                EXPORT  EXTI0_IRQHandler                  [WEAK]                                            
+                EXPORT  EXTI1_IRQHandler                  [WEAK]                                             
+                EXPORT  EXTI2_IRQHandler                  [WEAK]                                            
+                EXPORT  EXTI3_IRQHandler                  [WEAK]                                           
+                EXPORT  EXTI4_IRQHandler                  [WEAK]                                            
+                EXPORT  DMA1_Stream0_IRQHandler           [WEAK]                                
+                EXPORT  DMA1_Stream1_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream2_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream3_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream4_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream5_IRQHandler           [WEAK]                                   
+                EXPORT  DMA1_Stream6_IRQHandler           [WEAK]                                   
+                EXPORT  ADC_IRQHandler                    [WEAK]                         
+                EXPORT  CAN1_TX_IRQHandler                [WEAK]                                                
+                EXPORT  CAN1_RX0_IRQHandler               [WEAK]                                               
+                EXPORT  CAN1_RX1_IRQHandler               [WEAK]                                                
+                EXPORT  CAN1_SCE_IRQHandler               [WEAK]                                                
+                EXPORT  EXTI9_5_IRQHandler                [WEAK]                                    
+                EXPORT  TIM1_BRK_TIM9_IRQHandler          [WEAK]                  
+                EXPORT  TIM1_UP_TIM10_IRQHandler          [WEAK]                
+                EXPORT  TIM1_TRG_COM_TIM11_IRQHandler     [WEAK] 
+                EXPORT  TIM1_CC_IRQHandler                [WEAK]                                   
+                EXPORT  TIM2_IRQHandler                   [WEAK]                                            
+                EXPORT  TIM3_IRQHandler                   [WEAK]                                            
+                EXPORT  TIM4_IRQHandler                   [WEAK]                                            
+                EXPORT  I2C1_EV_IRQHandler                [WEAK]                                             
+                EXPORT  I2C1_ER_IRQHandler                [WEAK]                                             
+                EXPORT  I2C2_EV_IRQHandler                [WEAK]                                            
+                EXPORT  I2C2_ER_IRQHandler                [WEAK]                                               
+                EXPORT  SPI1_IRQHandler                   [WEAK]                                           
+                EXPORT  SPI2_IRQHandler                   [WEAK]                                            
+                EXPORT  USART1_IRQHandler                 [WEAK]                                          
+                EXPORT  USART2_IRQHandler                 [WEAK]                                          
+                EXPORT  USART3_IRQHandler                 [WEAK]                                         
+                EXPORT  EXTI15_10_IRQHandler              [WEAK]                                  
+                EXPORT  RTC_Alarm_IRQHandler              [WEAK]                  
+                EXPORT  OTG_FS_WKUP_IRQHandler            [WEAK]                        
+                EXPORT  TIM8_BRK_TIM12_IRQHandler         [WEAK]                 
+                EXPORT  TIM8_UP_TIM13_IRQHandler          [WEAK]                 
+                EXPORT  TIM8_TRG_COM_TIM14_IRQHandler     [WEAK] 
+                EXPORT  TIM8_CC_IRQHandler                [WEAK]                                   
+                EXPORT  DMA1_Stream7_IRQHandler           [WEAK]                                          
+                EXPORT  FMC_IRQHandler                    [WEAK]                                             
+                EXPORT  SDMMC1_IRQHandler                 [WEAK]                                             
+                EXPORT  TIM5_IRQHandler                   [WEAK]                                             
+                EXPORT  SPI3_IRQHandler                   [WEAK]                                             
+                EXPORT  UART4_IRQHandler                  [WEAK]                                            
+                EXPORT  UART5_IRQHandler                  [WEAK]                                            
+                EXPORT  TIM6_DAC_IRQHandler               [WEAK]                   
+                EXPORT  TIM7_IRQHandler                   [WEAK]                    
+                EXPORT  DMA2_Stream0_IRQHandler           [WEAK]                                  
+                EXPORT  DMA2_Stream1_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream2_IRQHandler           [WEAK]                                    
+                EXPORT  DMA2_Stream3_IRQHandler           [WEAK]                                    
+                EXPORT  DMA2_Stream4_IRQHandler           [WEAK]                                 
+                EXPORT  ETH_IRQHandler                    [WEAK]                                         
+                EXPORT  ETH_WKUP_IRQHandler               [WEAK]                     
+                EXPORT  CAN2_TX_IRQHandler                [WEAK]                                               
+                EXPORT  CAN2_RX0_IRQHandler               [WEAK]                                               
+                EXPORT  CAN2_RX1_IRQHandler               [WEAK]                                               
+                EXPORT  CAN2_SCE_IRQHandler               [WEAK]                                               
+                EXPORT  OTG_FS_IRQHandler                 [WEAK]                                       
+                EXPORT  DMA2_Stream5_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream6_IRQHandler           [WEAK]                                   
+                EXPORT  DMA2_Stream7_IRQHandler           [WEAK]                                   
+                EXPORT  USART6_IRQHandler                 [WEAK]                                           
+                EXPORT  I2C3_EV_IRQHandler                [WEAK]                                              
+                EXPORT  I2C3_ER_IRQHandler                [WEAK]                                              
+                EXPORT  OTG_HS_EP1_OUT_IRQHandler         [WEAK]                      
+                EXPORT  OTG_HS_EP1_IN_IRQHandler          [WEAK]                      
+                EXPORT  OTG_HS_WKUP_IRQHandler            [WEAK]                        
+                EXPORT  OTG_HS_IRQHandler                 [WEAK]                                      
+                EXPORT  DCMI_IRQHandler                   [WEAK]                                             
+                EXPORT  RNG_IRQHandler                    [WEAK]
+                EXPORT  FPU_IRQHandler                    [WEAK]
+                EXPORT  UART7_IRQHandler                  [WEAK]
+                EXPORT  UART8_IRQHandler                  [WEAK]
+                EXPORT  SPI4_IRQHandler                   [WEAK]
+                EXPORT  SPI5_IRQHandler                   [WEAK]
+                EXPORT  SPI6_IRQHandler                   [WEAK]
+                EXPORT  SAI1_IRQHandler                   [WEAK]
+                EXPORT  LTDC_IRQHandler                   [WEAK]
+                EXPORT  LTDC_ER_IRQHandler                [WEAK]
+                EXPORT  DMA2D_IRQHandler                  [WEAK]
+                EXPORT  SAI2_IRQHandler                   [WEAK]   
+                EXPORT  QUADSPI_IRQHandler                [WEAK]
+                EXPORT  LPTIM1_IRQHandler                 [WEAK]
+                EXPORT  CEC_IRQHandler                    [WEAK]   
+                EXPORT  I2C4_EV_IRQHandler                [WEAK]
+                EXPORT  I2C4_ER_IRQHandler                [WEAK]
+                EXPORT  SPDIF_RX_IRQHandler               [WEAK]
+
+WWDG_IRQHandler                                                       
+PVD_IRQHandler                                      
+TAMP_STAMP_IRQHandler                  
+RTC_WKUP_IRQHandler                                
+FLASH_IRQHandler                                                       
+RCC_IRQHandler                                                            
+EXTI0_IRQHandler                                                          
+EXTI1_IRQHandler                                                           
+EXTI2_IRQHandler                                                          
+EXTI3_IRQHandler                                                         
+EXTI4_IRQHandler                                                          
+DMA1_Stream0_IRQHandler                                       
+DMA1_Stream1_IRQHandler                                          
+DMA1_Stream2_IRQHandler                                          
+DMA1_Stream3_IRQHandler                                          
+DMA1_Stream4_IRQHandler                                          
+DMA1_Stream5_IRQHandler                                          
+DMA1_Stream6_IRQHandler                                          
+ADC_IRQHandler                                         
+CAN1_TX_IRQHandler                                                            
+CAN1_RX0_IRQHandler                                                          
+CAN1_RX1_IRQHandler                                                           
+CAN1_SCE_IRQHandler                                                           
+EXTI9_5_IRQHandler                                                
+TIM1_BRK_TIM9_IRQHandler                        
+TIM1_UP_TIM10_IRQHandler                      
+TIM1_TRG_COM_TIM11_IRQHandler  
+TIM1_CC_IRQHandler                                               
+TIM2_IRQHandler                                                           
+TIM3_IRQHandler                                                           
+TIM4_IRQHandler                                                           
+I2C1_EV_IRQHandler                                                         
+I2C1_ER_IRQHandler                                                         
+I2C2_EV_IRQHandler                                                        
+I2C2_ER_IRQHandler                                                           
+SPI1_IRQHandler                                                          
+SPI2_IRQHandler                                                           
+USART1_IRQHandler                                                       
+USART2_IRQHandler                                                       
+USART3_IRQHandler                                                      
+EXTI15_10_IRQHandler                                            
+RTC_Alarm_IRQHandler                            
+OTG_FS_WKUP_IRQHandler                                
+TIM8_BRK_TIM12_IRQHandler                      
+TIM8_UP_TIM13_IRQHandler                       
+TIM8_TRG_COM_TIM14_IRQHandler  
+TIM8_CC_IRQHandler                                               
+DMA1_Stream7_IRQHandler                                                 
+FMC_IRQHandler                                                            
+SDMMC1_IRQHandler                                                            
+TIM5_IRQHandler                                                            
+SPI3_IRQHandler                                                            
+UART4_IRQHandler                                                          
+UART5_IRQHandler                                                          
+TIM6_DAC_IRQHandler                            
+TIM7_IRQHandler                              
+DMA2_Stream0_IRQHandler                                         
+DMA2_Stream1_IRQHandler                                          
+DMA2_Stream2_IRQHandler                                           
+DMA2_Stream3_IRQHandler                                           
+DMA2_Stream4_IRQHandler                                        
+ETH_IRQHandler                                                         
+ETH_WKUP_IRQHandler                                
+CAN2_TX_IRQHandler                                                           
+CAN2_RX0_IRQHandler                                                          
+CAN2_RX1_IRQHandler                                                          
+CAN2_SCE_IRQHandler                                                          
+OTG_FS_IRQHandler                                                    
+DMA2_Stream5_IRQHandler                                          
+DMA2_Stream6_IRQHandler                                          
+DMA2_Stream7_IRQHandler                                          
+USART6_IRQHandler                                                        
+I2C3_EV_IRQHandler                                                          
+I2C3_ER_IRQHandler                                                          
+OTG_HS_EP1_OUT_IRQHandler                           
+OTG_HS_EP1_IN_IRQHandler                            
+OTG_HS_WKUP_IRQHandler                                
+OTG_HS_IRQHandler                                                   
+DCMI_IRQHandler                                                            
+RNG_IRQHandler
+FPU_IRQHandler  
+UART7_IRQHandler                  
+UART8_IRQHandler                  
+SPI4_IRQHandler                   
+SPI5_IRQHandler                   
+SPI6_IRQHandler                   
+SAI1_IRQHandler                   
+LTDC_IRQHandler                   
+LTDC_ER_IRQHandler                 
+DMA2D_IRQHandler   
+SAI2_IRQHandler        
+QUADSPI_IRQHandler
+LPTIM1_IRQHandler
+CEC_IRQHandler
+I2C4_EV_IRQHandler
+I2C4_ER_IRQHandler
+SPDIF_RX_IRQHandler
+                B       .
+
+                ENDP
+
+                ALIGN
+                END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_STD/stm32f746zg.sct	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2016, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+;     this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+;    this list of conditions and the following disclaimer in the documentation
+;    and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+;    may be used to endorse or promote products derived from this software
+;    without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F746ZG: 1024 KB FLASH (0x100000) + 320 KB SRAM (0x50000)
+LR_IROM1 0x08000000 0x100000  {    ; load region size_region
+
+  ER_IROM1 0x08000000 0x100000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+
+  ; Total: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM
+  RW_IRAM1 (0x20000000+0x1C8) (0x50000-0x1C8)  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_ARM_STD/sys.cpp	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library - stackheap
+ * Setup a fixed single stack/heap memory model, 
+ * between the top of the RW/ZI region and the stackpointer
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
+ *******************************************************************************
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif 
+
+#include <rt_misc.h>
+#include <stdint.h>
+
+extern char Image$$RW_IRAM1$$ZI$$Limit[];
+
+extern __value_in_regs struct __initial_stackheap __user_setup_stackheap(uint32_t R0, uint32_t R1, uint32_t R2, uint32_t R3) {
+    uint32_t zi_limit = (uint32_t)Image$$RW_IRAM1$$ZI$$Limit;
+    uint32_t sp_limit = __current_sp();
+
+    zi_limit = (zi_limit + 7) & ~0x7;    // ensure zi_limit is 8-byte aligned
+
+    struct __initial_stackheap r;
+    r.heap_base = zi_limit;
+    r.heap_limit = sp_limit;
+    return r;
+}
+
+#ifdef __cplusplus
+}
+#endif 

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_GCC_ARM/STM32F746ZG.ld	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{ 
+  FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
+  RAM (rwx)  : ORIGIN = 0x200001C8, LENGTH = 320K - 0x1C8
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ *   Reset_Handler : Entry of reset handler
+ * 
+ * It defines following symbols, which code can use without definition:
+ *   __exidx_start
+ *   __exidx_end
+ *   __etext
+ *   __data_start__
+ *   __preinit_array_start
+ *   __preinit_array_end
+ *   __init_array_start
+ *   __init_array_end
+ *   __fini_array_start
+ *   __fini_array_end
+ *   __data_end__
+ *   __bss_start__
+ *   __bss_end__
+ *   __end__
+ *   end
+ *   __HeapLimit
+ *   __StackLimit
+ *   __StackTop
+ *   __stack
+ *   _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+    .text :
+    {
+        KEEP(*(.isr_vector))
+        *(.text*)
+        KEEP(*(.init))
+        KEEP(*(.fini))
+
+        /* .ctors */
+        *crtbegin.o(.ctors)
+        *crtbegin?.o(.ctors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+        *(SORT(.ctors.*))
+        *(.ctors)
+
+        /* .dtors */
+        *crtbegin.o(.dtors)
+        *crtbegin?.o(.dtors)
+        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+        *(SORT(.dtors.*))
+        *(.dtors)
+
+        *(.rodata*)
+
+        KEEP(*(.eh_frame*))
+    } > FLASH
+
+    .ARM.extab :
+    {
+        *(.ARM.extab* .gnu.linkonce.armextab.*)
+    } > FLASH
+
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+    } > FLASH
+    __exidx_end = .;
+
+    __etext = .;
+    _sidata = .;
+
+    .data : AT (__etext)
+    {
+        __data_start__ = .;
+        _sdata = .;
+        *(vtable)
+        *(.data*)
+
+        . = ALIGN(4);
+        /* preinit data */
+        PROVIDE_HIDDEN (__preinit_array_start = .);
+        KEEP(*(.preinit_array))
+        PROVIDE_HIDDEN (__preinit_array_end = .);
+
+        . = ALIGN(4);
+        /* init data */
+        PROVIDE_HIDDEN (__init_array_start = .);
+        KEEP(*(SORT(.init_array.*)))
+        KEEP(*(.init_array))
+        PROVIDE_HIDDEN (__init_array_end = .);
+
+
+        . = ALIGN(4);
+        /* finit data */
+        PROVIDE_HIDDEN (__fini_array_start = .);
+        KEEP(*(SORT(.fini_array.*)))
+        KEEP(*(.fini_array))
+        PROVIDE_HIDDEN (__fini_array_end = .);
+
+        KEEP(*(.jcr*))
+        . = ALIGN(4);
+        /* All data end */
+        __data_end__ = .;
+        _edata = .;
+
+    } > RAM
+
+    .bss :
+    {
+        . = ALIGN(4);
+        __bss_start__ = .;
+        _sbss = .;
+        *(.bss*)
+        *(COMMON)
+        . = ALIGN(4);
+        __bss_end__ = .;
+        _ebss = .;
+    } > RAM
+
+    .heap (COPY):
+    {
+        __end__ = .;
+        end = __end__;
+        *(.heap*)
+        __HeapLimit = .;
+    } > RAM
+
+    /* .stack_dummy section doesn't contains any symbols. It is only
+     * used for linker to calculate size of stack sections, and assign
+     * values to stack symbols later */
+    .stack_dummy (COPY):
+    {
+        *(.stack*)
+    } > RAM
+
+    /* Set stack top to end of RAM, and stack limit move down by
+     * size of stack_dummy section */
+    __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+    _estack = __StackTop;
+    __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+    PROVIDE(__stack = __StackTop);
+
+    /* Check if data + heap + stack exceeds RAM limit */
+    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_GCC_ARM/startup_stm32f746xx.S	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,596 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f746xx.s
+  * @author    MCD Application Team
+  * @Version    V1.0.2
+  * @Date       21-September-2015
+  * @brief     STM32F746xx Devices vector table for GCC based toolchain. 
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M7 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+    
+  .syntax unified
+  .cpu cortex-m7
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */  
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval : None
+*/
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:  
+  ldr   sp, =_estack      /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */  
+  movs  r1, #0
+  b  LoopCopyDataInit
+
+CopyDataInit:
+  ldr  r3, =_sidata
+  ldr  r3, [r3, r1]
+  str  r3, [r0, r1]
+  adds  r1, r1, #4
+    
+LoopCopyDataInit:
+  ldr  r0, =_sdata
+  ldr  r3, =_edata
+  adds  r2, r0, r1
+  cmp  r2, r3
+  bcc  CopyDataInit
+  ldr  r2, =_sbss
+  b  LoopFillZerobss
+/* Zero fill the bss segment. */  
+FillZerobss:
+  movs  r3, #0
+  str  r3, [r2], #4
+    
+LoopFillZerobss:
+  ldr  r3, = _ebss
+  cmp  r2, r3
+  bcc  FillZerobss
+
+/* Call the clock system initialization function.*/
+  bl  SystemInit   
+/* Call static constructors */
+  //bl __libc_init_array
+/* Call the application's entry point.*/
+  //bl  main
+  // Calling the crt0 'cold-start' entry point. There __libc_init_array is called
+  // and when existing hardware_init_hook() and software_init_hook() before 
+  // starting main(). software_init_hook() is available and has to be called due 
+  // to initializsation when using rtos.
+  bl _start
+  bx  lr    
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M7. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+* 
+*******************************************************************************/
+   .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+   
+   
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  
+  /* External Interrupts */
+  .word     WWDG_IRQHandler                   /* Window WatchDog              */                                        
+  .word     PVD_IRQHandler                    /* PVD through EXTI Line detection */                        
+  .word     TAMP_STAMP_IRQHandler             /* Tamper and TimeStamps through the EXTI line */            
+  .word     RTC_WKUP_IRQHandler               /* RTC Wakeup through the EXTI line */                      
+  .word     FLASH_IRQHandler                  /* FLASH                        */                                          
+  .word     RCC_IRQHandler                    /* RCC                          */                                            
+  .word     EXTI0_IRQHandler                  /* EXTI Line0                   */                        
+  .word     EXTI1_IRQHandler                  /* EXTI Line1                   */                          
+  .word     EXTI2_IRQHandler                  /* EXTI Line2                   */                          
+  .word     EXTI3_IRQHandler                  /* EXTI Line3                   */                          
+  .word     EXTI4_IRQHandler                  /* EXTI Line4                   */                          
+  .word     DMA1_Stream0_IRQHandler           /* DMA1 Stream 0                */                  
+  .word     DMA1_Stream1_IRQHandler           /* DMA1 Stream 1                */                   
+  .word     DMA1_Stream2_IRQHandler           /* DMA1 Stream 2                */                   
+  .word     DMA1_Stream3_IRQHandler           /* DMA1 Stream 3                */                   
+  .word     DMA1_Stream4_IRQHandler           /* DMA1 Stream 4                */                   
+  .word     DMA1_Stream5_IRQHandler           /* DMA1 Stream 5                */                   
+  .word     DMA1_Stream6_IRQHandler           /* DMA1 Stream 6                */                   
+  .word     ADC_IRQHandler                    /* ADC1, ADC2 and ADC3s         */                   
+  .word     CAN1_TX_IRQHandler                /* CAN1 TX                      */                         
+  .word     CAN1_RX0_IRQHandler               /* CAN1 RX0                     */                          
+  .word     CAN1_RX1_IRQHandler               /* CAN1 RX1                     */                          
+  .word     CAN1_SCE_IRQHandler               /* CAN1 SCE                     */                          
+  .word     EXTI9_5_IRQHandler                /* External Line[9:5]s          */                          
+  .word     TIM1_BRK_TIM9_IRQHandler          /* TIM1 Break and TIM9          */         
+  .word     TIM1_UP_TIM10_IRQHandler          /* TIM1 Update and TIM10        */         
+  .word     TIM1_TRG_COM_TIM11_IRQHandler     /* TIM1 Trigger and Commutation and TIM11 */
+  .word     TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */                          
+  .word     TIM2_IRQHandler                   /* TIM2                         */                   
+  .word     TIM3_IRQHandler                   /* TIM3                         */                   
+  .word     TIM4_IRQHandler                   /* TIM4                         */                   
+  .word     I2C1_EV_IRQHandler                /* I2C1 Event                   */                          
+  .word     I2C1_ER_IRQHandler                /* I2C1 Error                   */                          
+  .word     I2C2_EV_IRQHandler                /* I2C2 Event                   */                          
+  .word     I2C2_ER_IRQHandler                /* I2C2 Error                   */                            
+  .word     SPI1_IRQHandler                   /* SPI1                         */                   
+  .word     SPI2_IRQHandler                   /* SPI2                         */                   
+  .word     USART1_IRQHandler                 /* USART1                       */                   
+  .word     USART2_IRQHandler                 /* USART2                       */                   
+  .word     USART3_IRQHandler                 /* USART3                       */                   
+  .word     EXTI15_10_IRQHandler              /* External Line[15:10]s        */                          
+  .word     RTC_Alarm_IRQHandler              /* RTC Alarm (A and B) through EXTI Line */                 
+  .word     OTG_FS_WKUP_IRQHandler            /* USB OTG FS Wakeup through EXTI line */                       
+  .word     TIM8_BRK_TIM12_IRQHandler         /* TIM8 Break and TIM12         */         
+  .word     TIM8_UP_TIM13_IRQHandler          /* TIM8 Update and TIM13        */         
+  .word     TIM8_TRG_COM_TIM14_IRQHandler     /* TIM8 Trigger and Commutation and TIM14 */
+  .word     TIM8_CC_IRQHandler                /* TIM8 Capture Compare         */                          
+  .word     DMA1_Stream7_IRQHandler           /* DMA1 Stream7                 */                          
+  .word     FMC_IRQHandler                    /* FMC                          */                   
+  .word     SDMMC1_IRQHandler                 /* SDMMC1                       */                   
+  .word     TIM5_IRQHandler                   /* TIM5                         */                   
+  .word     SPI3_IRQHandler                   /* SPI3                         */                   
+  .word     UART4_IRQHandler                  /* UART4                        */                   
+  .word     UART5_IRQHandler                  /* UART5                        */                   
+  .word     TIM6_DAC_IRQHandler               /* TIM6 and DAC1&2 underrun errors */                   
+  .word     TIM7_IRQHandler                   /* TIM7                         */
+  .word     DMA2_Stream0_IRQHandler           /* DMA2 Stream 0                */                   
+  .word     DMA2_Stream1_IRQHandler           /* DMA2 Stream 1                */                   
+  .word     DMA2_Stream2_IRQHandler           /* DMA2 Stream 2                */                   
+  .word     DMA2_Stream3_IRQHandler           /* DMA2 Stream 3                */                   
+  .word     DMA2_Stream4_IRQHandler           /* DMA2 Stream 4                */                   
+  .word     ETH_IRQHandler                    /* Ethernet                     */                   
+  .word     ETH_WKUP_IRQHandler               /* Ethernet Wakeup through EXTI line */                     
+  .word     CAN2_TX_IRQHandler                /* CAN2 TX                      */                          
+  .word     CAN2_RX0_IRQHandler               /* CAN2 RX0                     */                          
+  .word     CAN2_RX1_IRQHandler               /* CAN2 RX1                     */                          
+  .word     CAN2_SCE_IRQHandler               /* CAN2 SCE                     */                          
+  .word     OTG_FS_IRQHandler                 /* USB OTG FS                   */                   
+  .word     DMA2_Stream5_IRQHandler           /* DMA2 Stream 5                */                   
+  .word     DMA2_Stream6_IRQHandler           /* DMA2 Stream 6                */                   
+  .word     DMA2_Stream7_IRQHandler           /* DMA2 Stream 7                */                   
+  .word     USART6_IRQHandler                 /* USART6                       */                    
+  .word     I2C3_EV_IRQHandler                /* I2C3 event                   */                          
+  .word     I2C3_ER_IRQHandler                /* I2C3 error                   */                          
+  .word     OTG_HS_EP1_OUT_IRQHandler         /* USB OTG HS End Point 1 Out   */                   
+  .word     OTG_HS_EP1_IN_IRQHandler          /* USB OTG HS End Point 1 In    */                   
+  .word     OTG_HS_WKUP_IRQHandler            /* USB OTG HS Wakeup through EXTI */                         
+  .word     OTG_HS_IRQHandler                 /* USB OTG HS                   */                   
+  .word     DCMI_IRQHandler                   /* DCMI                         */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     RNG_IRQHandler                    /* Rng                          */
+  .word     FPU_IRQHandler                    /* FPU                          */
+  .word     UART7_IRQHandler                  /* UART7                        */      
+  .word     UART8_IRQHandler                  /* UART8                        */
+  .word     SPI4_IRQHandler                   /* SPI4                         */
+  .word     SPI5_IRQHandler                   /* SPI5	 		              */
+  .word     SPI6_IRQHandler                   /* SPI6   			          */
+  .word     SAI1_IRQHandler                   /* SAI1						  */
+  .word     LTDC_IRQHandler                   /* LTDC					      */
+  .word     LTDC_ER_IRQHandler                /* LTDC error					  */
+  .word     DMA2D_IRQHandler                  /* DMA2D    				      */
+  .word     SAI2_IRQHandler                   /* SAI2                         */
+  .word     QUADSPI_IRQHandler                /* QUADSPI                      */
+  .word     LPTIM1_IRQHandler                 /* LPTIM1                       */
+  .word     CEC_IRQHandler                    /* HDMI_CEC                     */
+  .word     I2C4_EV_IRQHandler                /* I2C4 Event                   */
+  .word     I2C4_ER_IRQHandler                /* I2C4 Error                   */
+  .word     SPDIF_RX_IRQHandler               /* SPDIF_RX                     */  
+  
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+* 
+*******************************************************************************/
+   .weak      NMI_Handler
+   .thumb_set NMI_Handler,Default_Handler
+  
+   .weak      HardFault_Handler
+   .thumb_set HardFault_Handler,Default_Handler
+  
+   .weak      MemManage_Handler
+   .thumb_set MemManage_Handler,Default_Handler
+  
+   .weak      BusFault_Handler
+   .thumb_set BusFault_Handler,Default_Handler
+
+   .weak      UsageFault_Handler
+   .thumb_set UsageFault_Handler,Default_Handler
+
+   .weak      SVC_Handler
+   .thumb_set SVC_Handler,Default_Handler
+
+   .weak      DebugMon_Handler
+   .thumb_set DebugMon_Handler,Default_Handler
+
+   .weak      PendSV_Handler
+   .thumb_set PendSV_Handler,Default_Handler
+
+   .weak      SysTick_Handler
+   .thumb_set SysTick_Handler,Default_Handler              
+  
+   .weak      WWDG_IRQHandler                   
+   .thumb_set WWDG_IRQHandler,Default_Handler      
+                  
+   .weak      PVD_IRQHandler      
+   .thumb_set PVD_IRQHandler,Default_Handler
+               
+   .weak      TAMP_STAMP_IRQHandler            
+   .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+            
+   .weak      RTC_WKUP_IRQHandler                  
+   .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+            
+   .weak      FLASH_IRQHandler         
+   .thumb_set FLASH_IRQHandler,Default_Handler
+                  
+   .weak      RCC_IRQHandler      
+   .thumb_set RCC_IRQHandler,Default_Handler
+                  
+   .weak      EXTI0_IRQHandler         
+   .thumb_set EXTI0_IRQHandler,Default_Handler
+                  
+   .weak      EXTI1_IRQHandler         
+   .thumb_set EXTI1_IRQHandler,Default_Handler
+                     
+   .weak      EXTI2_IRQHandler         
+   .thumb_set EXTI2_IRQHandler,Default_Handler 
+                 
+   .weak      EXTI3_IRQHandler         
+   .thumb_set EXTI3_IRQHandler,Default_Handler
+                        
+   .weak      EXTI4_IRQHandler         
+   .thumb_set EXTI4_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream0_IRQHandler               
+   .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
+         
+   .weak      DMA1_Stream1_IRQHandler               
+   .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream2_IRQHandler               
+   .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream3_IRQHandler               
+   .thumb_set DMA1_Stream3_IRQHandler,Default_Handler 
+                 
+   .weak      DMA1_Stream4_IRQHandler              
+   .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream5_IRQHandler               
+   .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream6_IRQHandler               
+   .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
+                  
+   .weak      ADC_IRQHandler      
+   .thumb_set ADC_IRQHandler,Default_Handler
+               
+   .weak      CAN1_TX_IRQHandler   
+   .thumb_set CAN1_TX_IRQHandler,Default_Handler
+            
+   .weak      CAN1_RX0_IRQHandler                  
+   .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+                           
+   .weak      CAN1_RX1_IRQHandler                  
+   .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+            
+   .weak      CAN1_SCE_IRQHandler                  
+   .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+            
+   .weak      EXTI9_5_IRQHandler   
+   .thumb_set EXTI9_5_IRQHandler,Default_Handler
+            
+   .weak      TIM1_BRK_TIM9_IRQHandler            
+   .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+            
+   .weak      TIM1_UP_TIM10_IRQHandler            
+   .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+   .weak      TIM1_TRG_COM_TIM11_IRQHandler      
+   .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+      
+   .weak      TIM1_CC_IRQHandler   
+   .thumb_set TIM1_CC_IRQHandler,Default_Handler
+                  
+   .weak      TIM2_IRQHandler            
+   .thumb_set TIM2_IRQHandler,Default_Handler
+                  
+   .weak      TIM3_IRQHandler            
+   .thumb_set TIM3_IRQHandler,Default_Handler
+                  
+   .weak      TIM4_IRQHandler            
+   .thumb_set TIM4_IRQHandler,Default_Handler
+                  
+   .weak      I2C1_EV_IRQHandler   
+   .thumb_set I2C1_EV_IRQHandler,Default_Handler
+                     
+   .weak      I2C1_ER_IRQHandler   
+   .thumb_set I2C1_ER_IRQHandler,Default_Handler
+                     
+   .weak      I2C2_EV_IRQHandler   
+   .thumb_set I2C2_EV_IRQHandler,Default_Handler
+                  
+   .weak      I2C2_ER_IRQHandler   
+   .thumb_set I2C2_ER_IRQHandler,Default_Handler
+                           
+   .weak      SPI1_IRQHandler            
+   .thumb_set SPI1_IRQHandler,Default_Handler
+                        
+   .weak      SPI2_IRQHandler            
+   .thumb_set SPI2_IRQHandler,Default_Handler
+                  
+   .weak      USART1_IRQHandler      
+   .thumb_set USART1_IRQHandler,Default_Handler
+                     
+   .weak      USART2_IRQHandler      
+   .thumb_set USART2_IRQHandler,Default_Handler
+                     
+   .weak      USART3_IRQHandler      
+   .thumb_set USART3_IRQHandler,Default_Handler
+                  
+   .weak      EXTI15_10_IRQHandler               
+   .thumb_set EXTI15_10_IRQHandler,Default_Handler
+               
+   .weak      RTC_Alarm_IRQHandler               
+   .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+            
+   .weak      OTG_FS_WKUP_IRQHandler         
+   .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+            
+   .weak      TIM8_BRK_TIM12_IRQHandler         
+   .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+         
+   .weak      TIM8_UP_TIM13_IRQHandler            
+   .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+         
+   .weak      TIM8_TRG_COM_TIM14_IRQHandler      
+   .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+      
+   .weak      TIM8_CC_IRQHandler   
+   .thumb_set TIM8_CC_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream7_IRQHandler               
+   .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
+                     
+   .weak      FMC_IRQHandler            
+   .thumb_set FMC_IRQHandler,Default_Handler
+                     
+   .weak      SDMMC1_IRQHandler            
+   .thumb_set SDMMC1_IRQHandler,Default_Handler
+                     
+   .weak      TIM5_IRQHandler            
+   .thumb_set TIM5_IRQHandler,Default_Handler
+                     
+   .weak      SPI3_IRQHandler            
+   .thumb_set SPI3_IRQHandler,Default_Handler
+                     
+   .weak      UART4_IRQHandler         
+   .thumb_set UART4_IRQHandler,Default_Handler
+                  
+   .weak      UART5_IRQHandler         
+   .thumb_set UART5_IRQHandler,Default_Handler
+                  
+   .weak      TIM6_DAC_IRQHandler                  
+   .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+               
+   .weak      TIM7_IRQHandler            
+   .thumb_set TIM7_IRQHandler,Default_Handler
+         
+   .weak      DMA2_Stream0_IRQHandler               
+   .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
+               
+   .weak      DMA2_Stream1_IRQHandler               
+   .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream2_IRQHandler               
+   .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
+            
+   .weak      DMA2_Stream3_IRQHandler               
+   .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
+            
+   .weak      DMA2_Stream4_IRQHandler               
+   .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
+   
+   .weak      DMA2_Stream4_IRQHandler               
+   .thumb_set DMA2_Stream4_IRQHandler,Default_Handler   
+
+   .weak      ETH_IRQHandler   
+   .thumb_set ETH_IRQHandler,Default_Handler
+   
+   .weak      ETH_WKUP_IRQHandler   
+   .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+   .weak      CAN2_TX_IRQHandler   
+   .thumb_set CAN2_TX_IRQHandler,Default_Handler   
+                           
+   .weak      CAN2_RX0_IRQHandler                  
+   .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+                           
+   .weak      CAN2_RX1_IRQHandler                  
+   .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+                           
+   .weak      CAN2_SCE_IRQHandler                  
+   .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+                           
+   .weak      OTG_FS_IRQHandler      
+   .thumb_set OTG_FS_IRQHandler,Default_Handler
+                     
+   .weak      DMA2_Stream5_IRQHandler               
+   .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream6_IRQHandler               
+   .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream7_IRQHandler               
+   .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
+                  
+   .weak      USART6_IRQHandler      
+   .thumb_set USART6_IRQHandler,Default_Handler
+                        
+   .weak      I2C3_EV_IRQHandler   
+   .thumb_set I2C3_EV_IRQHandler,Default_Handler
+                        
+   .weak      I2C3_ER_IRQHandler   
+   .thumb_set I2C3_ER_IRQHandler,Default_Handler
+                        
+   .weak      OTG_HS_EP1_OUT_IRQHandler         
+   .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
+               
+   .weak      OTG_HS_EP1_IN_IRQHandler            
+   .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
+               
+   .weak      OTG_HS_WKUP_IRQHandler         
+   .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
+            
+   .weak      OTG_HS_IRQHandler      
+   .thumb_set OTG_HS_IRQHandler,Default_Handler
+                  
+   .weak      DCMI_IRQHandler            
+   .thumb_set DCMI_IRQHandler,Default_Handler
+
+   .weak      RNG_IRQHandler            
+   .thumb_set RNG_IRQHandler,Default_Handler   
+
+   .weak      FPU_IRQHandler                  
+   .thumb_set FPU_IRQHandler,Default_Handler
+
+   .weak      UART7_IRQHandler                  
+   .thumb_set UART7_IRQHandler,Default_Handler
+
+   .weak      UART8_IRQHandler                  
+   .thumb_set UART8_IRQHandler,Default_Handler   
+
+   .weak      SPI4_IRQHandler            
+   .thumb_set SPI4_IRQHandler,Default_Handler
+   
+   .weak      SPI5_IRQHandler            
+   .thumb_set SPI5_IRQHandler,Default_Handler
+
+   .weak      SPI6_IRQHandler            
+   .thumb_set SPI6_IRQHandler,Default_Handler   
+
+   .weak      SAI1_IRQHandler            
+   .thumb_set SAI1_IRQHandler,Default_Handler
+   
+   .weak      LTDC_IRQHandler            
+   .thumb_set LTDC_IRQHandler,Default_Handler
+
+   .weak      LTDC_ER_IRQHandler            
+   .thumb_set LTDC_ER_IRQHandler,Default_Handler
+
+   .weak      DMA2D_IRQHandler            
+   .thumb_set DMA2D_IRQHandler,Default_Handler   
+
+   .weak      SAI2_IRQHandler            
+   .thumb_set SAI2_IRQHandler,Default_Handler
+   
+   .weak      QUADSPI_IRQHandler            
+   .thumb_set QUADSPI_IRQHandler,Default_Handler
+ 
+   .weak      LPTIM1_IRQHandler            
+   .thumb_set LPTIM1_IRQHandler,Default_Handler
+
+   .weak      CEC_IRQHandler            
+   .thumb_set CEC_IRQHandler,Default_Handler
+   
+   .weak      I2C4_EV_IRQHandler            
+   .thumb_set I2C4_EV_IRQHandler,Default_Handler 
+ 
+   .weak      I2C4_ER_IRQHandler            
+   .thumb_set I2C4_ER_IRQHandler,Default_Handler
+   
+   .weak      SPDIF_RX_IRQHandler            
+   .thumb_set SPDIF_RX_IRQHandler,Default_Handler 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/		
+ 

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_IAR/startup_stm32f746xx.S	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,732 @@
+;/******************** (C) COPYRIGHT 2016 STMicroelectronics ********************
+;* File Name          : startup_stm32f746xx.s
+;* Author             : MCD Application Team
+;* Version            : V1.0.2
+;* Date               : 21-September-2015
+;* Description        : STM32F746xx devices vector table for EWARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == _iar_program_start,
+;*                      - Set the vector table entries with the exceptions ISR 
+;*                        address.
+;*                      - Branches to main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the Cortex-M7 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;********************************************************************************
+;* 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* 
+;*******************************************************************************
+;
+;
+; The modules in this file are included in the libraries, and may be replaced
+; by any user-defined modules that define the PUBLIC symbol _program_start or
+; a user defined start symbol.
+; To override the cstartup defined in the library, simply add your modified
+; version to the workbench project.
+;
+; The vector table is normally located at address 0.
+; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
+; The name "__vector_table" has special meaning for C-SPY:
+; it is where the SP start value is found, and the NVIC vector
+; table register (VTOR) is initialized to this address if != 0.
+;
+; Cortex-M version
+;
+
+        MODULE  ?cstartup
+
+        ;; Forward declaration of sections.
+        SECTION CSTACK:DATA:NOROOT(3)
+
+        SECTION .intvec:CODE:NOROOT(2)
+
+        EXTERN  __iar_program_start
+        EXTERN  SystemInit
+        PUBLIC  __vector_table
+
+        DATA
+__vector_table
+        DCD     sfe(CSTACK)
+        DCD     Reset_Handler             ; Reset Handler
+
+        DCD     NMI_Handler               ; NMI Handler
+        DCD     HardFault_Handler         ; Hard Fault Handler
+        DCD     MemManage_Handler         ; MPU Fault Handler
+        DCD     BusFault_Handler          ; Bus Fault Handler
+        DCD     UsageFault_Handler        ; Usage Fault Handler
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     0                         ; Reserved
+        DCD     SVC_Handler               ; SVCall Handler
+        DCD     DebugMon_Handler          ; Debug Monitor Handler
+        DCD     0                         ; Reserved
+        DCD     PendSV_Handler            ; PendSV Handler
+        DCD     SysTick_Handler           ; SysTick Handler
+
+         ; External Interrupts
+        DCD     WWDG_IRQHandler                   ; Window WatchDog                                        
+        DCD     PVD_IRQHandler                    ; PVD through EXTI Line detection                        
+        DCD     TAMP_STAMP_IRQHandler             ; Tamper and TimeStamps through the EXTI line            
+        DCD     RTC_WKUP_IRQHandler               ; RTC Wakeup through the EXTI line                       
+        DCD     FLASH_IRQHandler                  ; FLASH                                           
+        DCD     RCC_IRQHandler                    ; RCC                                             
+        DCD     EXTI0_IRQHandler                  ; EXTI Line0                                             
+        DCD     EXTI1_IRQHandler                  ; EXTI Line1                                             
+        DCD     EXTI2_IRQHandler                  ; EXTI Line2                                             
+        DCD     EXTI3_IRQHandler                  ; EXTI Line3                                             
+        DCD     EXTI4_IRQHandler                  ; EXTI Line4                                             
+        DCD     DMA1_Stream0_IRQHandler           ; DMA1 Stream 0                                   
+        DCD     DMA1_Stream1_IRQHandler           ; DMA1 Stream 1                                   
+        DCD     DMA1_Stream2_IRQHandler           ; DMA1 Stream 2                                   
+        DCD     DMA1_Stream3_IRQHandler           ; DMA1 Stream 3                                   
+        DCD     DMA1_Stream4_IRQHandler           ; DMA1 Stream 4                                   
+        DCD     DMA1_Stream5_IRQHandler           ; DMA1 Stream 5                                   
+        DCD     DMA1_Stream6_IRQHandler           ; DMA1 Stream 6                                   
+        DCD     ADC_IRQHandler                    ; ADC1, ADC2 and ADC3s                            
+        DCD     CAN1_TX_IRQHandler                ; CAN1 TX                                                
+        DCD     CAN1_RX0_IRQHandler               ; CAN1 RX0                                               
+        DCD     CAN1_RX1_IRQHandler               ; CAN1 RX1                                               
+        DCD     CAN1_SCE_IRQHandler               ; CAN1 SCE                                               
+        DCD     EXTI9_5_IRQHandler                ; External Line[9:5]s                                    
+        DCD     TIM1_BRK_TIM9_IRQHandler          ; TIM1 Break and TIM9                   
+        DCD     TIM1_UP_TIM10_IRQHandler          ; TIM1 Update and TIM10                 
+        DCD     TIM1_TRG_COM_TIM11_IRQHandler     ; TIM1 Trigger and Commutation and TIM11
+        DCD     TIM1_CC_IRQHandler                ; TIM1 Capture Compare                                   
+        DCD     TIM2_IRQHandler                   ; TIM2                                            
+        DCD     TIM3_IRQHandler                   ; TIM3                                            
+        DCD     TIM4_IRQHandler                   ; TIM4                                            
+        DCD     I2C1_EV_IRQHandler                ; I2C1 Event                                             
+        DCD     I2C1_ER_IRQHandler                ; I2C1 Error                                             
+        DCD     I2C2_EV_IRQHandler                ; I2C2 Event                                             
+        DCD     I2C2_ER_IRQHandler                ; I2C2 Error                                               
+        DCD     SPI1_IRQHandler                   ; SPI1                                            
+        DCD     SPI2_IRQHandler                   ; SPI2                                            
+        DCD     USART1_IRQHandler                 ; USART1                                          
+        DCD     USART2_IRQHandler                 ; USART2                                          
+        DCD     USART3_IRQHandler                 ; USART3                                          
+        DCD     EXTI15_10_IRQHandler              ; External Line[15:10]s                                  
+        DCD     RTC_Alarm_IRQHandler              ; RTC Alarm (A and B) through EXTI Line                  
+        DCD     OTG_FS_WKUP_IRQHandler            ; USB OTG FS Wakeup through EXTI line                        
+        DCD     TIM8_BRK_TIM12_IRQHandler         ; TIM8 Break and TIM12                  
+        DCD     TIM8_UP_TIM13_IRQHandler          ; TIM8 Update and TIM13                 
+        DCD     TIM8_TRG_COM_TIM14_IRQHandler     ; TIM8 Trigger and Commutation and TIM14
+        DCD     TIM8_CC_IRQHandler                ; TIM8 Capture Compare                                   
+        DCD     DMA1_Stream7_IRQHandler           ; DMA1 Stream7                                           
+        DCD     FMC_IRQHandler                    ; FMC                                            
+        DCD     SDMMC1_IRQHandler                 ; SDMMC1                                            
+        DCD     TIM5_IRQHandler                   ; TIM5                                            
+        DCD     SPI3_IRQHandler                   ; SPI3                                            
+        DCD     UART4_IRQHandler                  ; UART4                                           
+        DCD     UART5_IRQHandler                  ; UART5                                           
+        DCD     TIM6_DAC_IRQHandler               ; TIM6 and DAC1&2 underrun errors                   
+        DCD     TIM7_IRQHandler                   ; TIM7                   
+        DCD     DMA2_Stream0_IRQHandler           ; DMA2 Stream 0                                   
+        DCD     DMA2_Stream1_IRQHandler           ; DMA2 Stream 1                                   
+        DCD     DMA2_Stream2_IRQHandler           ; DMA2 Stream 2                                   
+        DCD     DMA2_Stream3_IRQHandler           ; DMA2 Stream 3                                   
+        DCD     DMA2_Stream4_IRQHandler           ; DMA2 Stream 4                                   
+        DCD     ETH_IRQHandler                    ; Ethernet                                        
+        DCD     ETH_WKUP_IRQHandler               ; Ethernet Wakeup through EXTI line                      
+        DCD     CAN2_TX_IRQHandler                ; CAN2 TX                                                
+        DCD     CAN2_RX0_IRQHandler               ; CAN2 RX0                                               
+        DCD     CAN2_RX1_IRQHandler               ; CAN2 RX1                                               
+        DCD     CAN2_SCE_IRQHandler               ; CAN2 SCE                                               
+        DCD     OTG_FS_IRQHandler                 ; USB OTG FS                                      
+        DCD     DMA2_Stream5_IRQHandler           ; DMA2 Stream 5                                   
+        DCD     DMA2_Stream6_IRQHandler           ; DMA2 Stream 6                                   
+        DCD     DMA2_Stream7_IRQHandler           ; DMA2 Stream 7                                   
+        DCD     USART6_IRQHandler                 ; USART6                                           
+        DCD     I2C3_EV_IRQHandler                ; I2C3 event                                             
+        DCD     I2C3_ER_IRQHandler                ; I2C3 error                                             
+        DCD     OTG_HS_EP1_OUT_IRQHandler         ; USB OTG HS End Point 1 Out                      
+        DCD     OTG_HS_EP1_IN_IRQHandler          ; USB OTG HS End Point 1 In                       
+        DCD     OTG_HS_WKUP_IRQHandler            ; USB OTG HS Wakeup through EXTI                         
+        DCD     OTG_HS_IRQHandler                 ; USB OTG HS                                      
+        DCD     DCMI_IRQHandler                   ; DCMI                                            
+        DCD     0                                 ; Reserved                                    
+        DCD     RNG_IRQHandler                    ; Rng
+        DCD     FPU_IRQHandler                    ; FPU
+        DCD     UART7_IRQHandler                  ; UART7
+        DCD     UART8_IRQHandler                  ; UART8
+        DCD     SPI4_IRQHandler                   ; SPI4
+        DCD     SPI5_IRQHandler                   ; SPI5
+        DCD     SPI6_IRQHandler                   ; SPI6
+        DCD     SAI1_IRQHandler                   ; SAI1
+        DCD     LTDC_IRQHandler                   ; LTDC
+        DCD     LTDC_ER_IRQHandler                ; LTDC error
+        DCD     DMA2D_IRQHandler                  ; DMA2D
+        DCD     SAI2_IRQHandler                   ; SAI2
+        DCD     QUADSPI_IRQHandler                ; QUADSPI
+        DCD     LPTIM1_IRQHandler                 ; LPTIM1
+        DCD     CEC_IRQHandler                    ; HDMI_CEC
+        DCD     I2C4_EV_IRQHandler                ; I2C4 Event                                             
+        DCD     I2C4_ER_IRQHandler                ; I2C4 Error 
+        DCD     SPDIF_RX_IRQHandler               ; SPDIF_RX
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Default interrupt handlers.
+;;
+        THUMB
+        PUBWEAK Reset_Handler
+        SECTION .text:CODE:NOROOT:REORDER(2)
+Reset_Handler
+
+        LDR     R0, =SystemInit
+        BLX     R0
+        LDR     R0, =__iar_program_start
+        BX      R0
+
+        PUBWEAK NMI_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+NMI_Handler
+        B NMI_Handler
+
+        PUBWEAK HardFault_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+HardFault_Handler
+        B HardFault_Handler
+
+        PUBWEAK MemManage_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+MemManage_Handler
+        B MemManage_Handler
+
+        PUBWEAK BusFault_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+BusFault_Handler
+        B BusFault_Handler
+
+        PUBWEAK UsageFault_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+UsageFault_Handler
+        B UsageFault_Handler
+
+        PUBWEAK SVC_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SVC_Handler
+        B SVC_Handler
+
+        PUBWEAK DebugMon_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+DebugMon_Handler
+        B DebugMon_Handler
+
+        PUBWEAK PendSV_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+PendSV_Handler
+        B PendSV_Handler
+
+        PUBWEAK SysTick_Handler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SysTick_Handler
+        B SysTick_Handler
+
+        PUBWEAK WWDG_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+WWDG_IRQHandler  
+        B WWDG_IRQHandler
+
+        PUBWEAK PVD_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+PVD_IRQHandler  
+        B PVD_IRQHandler
+
+        PUBWEAK TAMP_STAMP_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TAMP_STAMP_IRQHandler  
+        B TAMP_STAMP_IRQHandler
+
+        PUBWEAK RTC_WKUP_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+RTC_WKUP_IRQHandler  
+        B RTC_WKUP_IRQHandler
+
+        PUBWEAK FLASH_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+FLASH_IRQHandler  
+        B FLASH_IRQHandler
+
+        PUBWEAK RCC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+RCC_IRQHandler  
+        B RCC_IRQHandler
+
+        PUBWEAK EXTI0_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI0_IRQHandler  
+        B EXTI0_IRQHandler
+
+        PUBWEAK EXTI1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI1_IRQHandler  
+        B EXTI1_IRQHandler
+
+        PUBWEAK EXTI2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI2_IRQHandler  
+        B EXTI2_IRQHandler
+
+        PUBWEAK EXTI3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+EXTI3_IRQHandler
+        B EXTI3_IRQHandler
+
+        PUBWEAK EXTI4_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+EXTI4_IRQHandler  
+        B EXTI4_IRQHandler
+
+        PUBWEAK DMA1_Stream0_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream0_IRQHandler  
+        B DMA1_Stream0_IRQHandler
+
+        PUBWEAK DMA1_Stream1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream1_IRQHandler  
+        B DMA1_Stream1_IRQHandler
+
+        PUBWEAK DMA1_Stream2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream2_IRQHandler  
+        B DMA1_Stream2_IRQHandler
+
+        PUBWEAK DMA1_Stream3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream3_IRQHandler  
+        B DMA1_Stream3_IRQHandler
+
+        PUBWEAK DMA1_Stream4_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream4_IRQHandler  
+        B DMA1_Stream4_IRQHandler
+
+        PUBWEAK DMA1_Stream5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream5_IRQHandler  
+        B DMA1_Stream5_IRQHandler
+
+        PUBWEAK DMA1_Stream6_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream6_IRQHandler  
+        B DMA1_Stream6_IRQHandler
+
+        PUBWEAK ADC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+ADC_IRQHandler  
+        B ADC_IRQHandler
+
+        PUBWEAK CAN1_TX_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+CAN1_TX_IRQHandler  
+        B CAN1_TX_IRQHandler
+
+        PUBWEAK CAN1_RX0_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+CAN1_RX0_IRQHandler  
+        B CAN1_RX0_IRQHandler
+
+        PUBWEAK CAN1_RX1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+CAN1_RX1_IRQHandler  
+        B CAN1_RX1_IRQHandler
+
+        PUBWEAK CAN1_SCE_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+CAN1_SCE_IRQHandler  
+        B CAN1_SCE_IRQHandler
+
+        PUBWEAK EXTI9_5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+EXTI9_5_IRQHandler  
+        B EXTI9_5_IRQHandler
+
+        PUBWEAK TIM1_BRK_TIM9_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM1_BRK_TIM9_IRQHandler  
+        B TIM1_BRK_TIM9_IRQHandler
+
+        PUBWEAK TIM1_UP_TIM10_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM1_UP_TIM10_IRQHandler  
+        B TIM1_UP_TIM10_IRQHandler
+
+        PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM1_TRG_COM_TIM11_IRQHandler  
+        B TIM1_TRG_COM_TIM11_IRQHandler
+        
+        PUBWEAK TIM1_CC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM1_CC_IRQHandler  
+        B TIM1_CC_IRQHandler
+
+        PUBWEAK TIM2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM2_IRQHandler  
+        B TIM2_IRQHandler
+
+        PUBWEAK TIM3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM3_IRQHandler  
+        B TIM3_IRQHandler
+
+        PUBWEAK TIM4_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM4_IRQHandler  
+        B TIM4_IRQHandler
+
+        PUBWEAK I2C1_EV_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C1_EV_IRQHandler  
+        B I2C1_EV_IRQHandler
+
+        PUBWEAK I2C1_ER_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C1_ER_IRQHandler  
+        B I2C1_ER_IRQHandler
+
+        PUBWEAK I2C2_EV_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C2_EV_IRQHandler  
+        B I2C2_EV_IRQHandler
+
+        PUBWEAK I2C2_ER_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C2_ER_IRQHandler  
+        B I2C2_ER_IRQHandler
+
+        PUBWEAK SPI1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SPI1_IRQHandler  
+        B SPI1_IRQHandler
+
+        PUBWEAK SPI2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SPI2_IRQHandler  
+        B SPI2_IRQHandler
+
+        PUBWEAK USART1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+USART1_IRQHandler  
+        B USART1_IRQHandler
+
+        PUBWEAK USART2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+USART2_IRQHandler  
+        B USART2_IRQHandler
+
+        PUBWEAK USART3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+USART3_IRQHandler  
+        B USART3_IRQHandler
+
+        PUBWEAK EXTI15_10_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)   
+EXTI15_10_IRQHandler  
+        B EXTI15_10_IRQHandler
+
+        PUBWEAK RTC_Alarm_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)   
+RTC_Alarm_IRQHandler  
+        B RTC_Alarm_IRQHandler
+
+        PUBWEAK OTG_FS_WKUP_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+OTG_FS_WKUP_IRQHandler  
+        B OTG_FS_WKUP_IRQHandler
+      
+        PUBWEAK TIM8_BRK_TIM12_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM8_BRK_TIM12_IRQHandler  
+        B TIM8_BRK_TIM12_IRQHandler
+
+        PUBWEAK TIM8_UP_TIM13_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM8_UP_TIM13_IRQHandler  
+        B TIM8_UP_TIM13_IRQHandler
+
+        PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+TIM8_TRG_COM_TIM14_IRQHandler  
+        B TIM8_TRG_COM_TIM14_IRQHandler
+
+        PUBWEAK TIM8_CC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+TIM8_CC_IRQHandler  
+        B TIM8_CC_IRQHandler
+
+        PUBWEAK DMA1_Stream7_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA1_Stream7_IRQHandler  
+        B DMA1_Stream7_IRQHandler
+
+        PUBWEAK FMC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+FMC_IRQHandler  
+        B FMC_IRQHandler
+
+        PUBWEAK SDMMC1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SDMMC1_IRQHandler  
+        B SDMMC1_IRQHandler
+
+        PUBWEAK TIM5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+TIM5_IRQHandler  
+        B TIM5_IRQHandler
+
+        PUBWEAK SPI3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+SPI3_IRQHandler  
+        B SPI3_IRQHandler
+
+        PUBWEAK UART4_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+UART4_IRQHandler  
+        B UART4_IRQHandler
+
+        PUBWEAK UART5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+UART5_IRQHandler  
+        B UART5_IRQHandler
+
+        PUBWEAK TIM6_DAC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)   
+TIM6_DAC_IRQHandler  
+        B TIM6_DAC_IRQHandler
+
+        PUBWEAK TIM7_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)   
+TIM7_IRQHandler  
+        B TIM7_IRQHandler
+
+        PUBWEAK DMA2_Stream0_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream0_IRQHandler  
+        B DMA2_Stream0_IRQHandler
+
+        PUBWEAK DMA2_Stream1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream1_IRQHandler  
+        B DMA2_Stream1_IRQHandler
+
+        PUBWEAK DMA2_Stream2_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream2_IRQHandler  
+        B DMA2_Stream2_IRQHandler
+
+        PUBWEAK DMA2_Stream3_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream3_IRQHandler  
+        B DMA2_Stream3_IRQHandler
+
+        PUBWEAK DMA2_Stream4_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream4_IRQHandler  
+        B DMA2_Stream4_IRQHandler
+
+        PUBWEAK ETH_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+ETH_IRQHandler  
+        B ETH_IRQHandler
+
+        PUBWEAK ETH_WKUP_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+ETH_WKUP_IRQHandler  
+        B ETH_WKUP_IRQHandler
+
+        PUBWEAK CAN2_TX_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+CAN2_TX_IRQHandler  
+        B CAN2_TX_IRQHandler
+
+        PUBWEAK CAN2_RX0_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+CAN2_RX0_IRQHandler  
+        B CAN2_RX0_IRQHandler
+
+        PUBWEAK CAN2_RX1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+CAN2_RX1_IRQHandler  
+        B CAN2_RX1_IRQHandler
+
+        PUBWEAK CAN2_SCE_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+CAN2_SCE_IRQHandler  
+        B CAN2_SCE_IRQHandler
+
+        PUBWEAK OTG_FS_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+OTG_FS_IRQHandler  
+        B OTG_FS_IRQHandler
+
+        PUBWEAK DMA2_Stream5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream5_IRQHandler  
+        B DMA2_Stream5_IRQHandler
+
+        PUBWEAK DMA2_Stream6_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream6_IRQHandler  
+        B DMA2_Stream6_IRQHandler
+
+        PUBWEAK DMA2_Stream7_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+DMA2_Stream7_IRQHandler  
+        B DMA2_Stream7_IRQHandler
+
+        PUBWEAK USART6_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+USART6_IRQHandler  
+        B USART6_IRQHandler
+
+        PUBWEAK I2C3_EV_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C3_EV_IRQHandler  
+        B I2C3_EV_IRQHandler
+
+        PUBWEAK I2C3_ER_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C3_ER_IRQHandler  
+        B I2C3_ER_IRQHandler
+
+        PUBWEAK OTG_HS_EP1_OUT_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+OTG_HS_EP1_OUT_IRQHandler  
+        B OTG_HS_EP1_OUT_IRQHandler
+
+        PUBWEAK OTG_HS_EP1_IN_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+OTG_HS_EP1_IN_IRQHandler  
+        B OTG_HS_EP1_IN_IRQHandler
+
+        PUBWEAK OTG_HS_WKUP_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)    
+OTG_HS_WKUP_IRQHandler  
+        B OTG_HS_WKUP_IRQHandler
+
+        PUBWEAK OTG_HS_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+OTG_HS_IRQHandler  
+        B OTG_HS_IRQHandler
+
+        PUBWEAK DCMI_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)
+DCMI_IRQHandler  
+        B DCMI_IRQHandler
+
+        PUBWEAK RNG_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+RNG_IRQHandler  
+        B RNG_IRQHandler
+
+        PUBWEAK FPU_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)  
+FPU_IRQHandler  
+        B FPU_IRQHandler
+
+        PUBWEAK UART7_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1)      
+UART7_IRQHandler 
+        B UART7_IRQHandler  
+
+        PUBWEAK UART8_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+UART8_IRQHandler             
+        B UART8_IRQHandler
+        
+        PUBWEAK SPI4_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+SPI4_IRQHandler
+        B SPI4_IRQHandler                 
+
+        PUBWEAK SPI5_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+SPI5_IRQHandler   
+        B SPI5_IRQHandler                  
+
+        PUBWEAK SPI6_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+SPI6_IRQHandler 
+        B SPI6_IRQHandler                    
+
+        PUBWEAK SAI1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+SAI1_IRQHandler  
+        B SAI1_IRQHandler                  
+
+        PUBWEAK LTDC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+LTDC_IRQHandler 
+        B LTDC_IRQHandler                     
+
+        PUBWEAK LTDC_ER_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+LTDC_ER_IRQHandler 
+        B LTDC_ER_IRQHandler                 
+
+        PUBWEAK DMA2D_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+DMA2D_IRQHandler 
+        B DMA2D_IRQHandler                  
+
+       PUBWEAK SAI2_IRQHandler
+       SECTION .text:CODE:NOROOT:REORDER(1) 
+SAI2_IRQHandler 
+        B SAI2_IRQHandler          
+
+       PUBWEAK QUADSPI_IRQHandler
+       SECTION .text:CODE:NOROOT:REORDER(1) 
+QUADSPI_IRQHandler 
+        B QUADSPI_IRQHandler       
+        
+        PUBWEAK LPTIM1_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+LPTIM1_IRQHandler 
+        B LPTIM1_IRQHandler   
+        
+        PUBWEAK CEC_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+CEC_IRQHandler 
+        B CEC_IRQHandler 
+
+        PUBWEAK I2C4_EV_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C4_EV_IRQHandler 
+        B I2C4_EV_IRQHandler   
+        
+        PUBWEAK I2C4_ER_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+I2C4_ER_IRQHandler 
+        B I2C4_ER_IRQHandler 
+ 
+        PUBWEAK SPDIF_RX_IRQHandler
+        SECTION .text:CODE:NOROOT:REORDER(1) 
+SPDIF_RX_IRQHandler 
+        B SPDIF_RX_IRQHandler 
+        END
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/TOOLCHAIN_IAR/stm32f746zg.icf	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,35 @@
+/* [ROM = 1024kb = 0x100000] */
+define symbol __intvec_start__     = 0x08000000;
+define symbol __region_ROM_start__ = 0x08000000;
+define symbol __region_ROM_end__   = 0x080FFFFF;
+
+/* [RAM = 320kb = 0x50000] Vector table dynamic copy: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM */
+define symbol __NVIC_start__          = 0x20000000;
+define symbol __NVIC_end__            = 0x200001C7; /* Aligned on 8 bytes */
+define symbol __region_RAM_start__    = 0x200001C8;
+define symbol __region_RAM_end__      = 0x2004FFFF;
+
+define symbol __region_ITCMRAM_start__ = 0x00000000;
+define symbol __region_ITCMRAM_end__   = 0x00003FFF;
+
+/* Memory regions */
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
+define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
+define region ITCMRAM_region = mem:[from __region_ITCMRAM_start__ to __region_ITCMRAM_end__];
+
+/* Stack and Heap */
+/*Heap 1/4 of ram and stack 1/8*/
+define symbol __size_cstack__ = 0x4000;
+define symbol __size_heap__   = 0x8000;
+define block CSTACK    with alignment = 8, size = __size_cstack__   { };
+define block HEAP      with alignment = 8, size = __size_heap__     { };
+define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+
+initialize by copy with packing = zeros { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite, block STACKHEAP };

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,38 @@
+/* mbed Microcontroller Library
+ * A generic CMSIS include header
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_H
+#define MBED_CMSIS_H
+
+#include "stm32f7xx.h"
+#include "cmsis_nvic.h"
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis_nvic.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "cmsis_nvic.h"
+
+#define NVIC_RAM_VECTOR_ADDRESS   (0x20000000)  // Vectors positioned at start of RAM
+#define NVIC_FLASH_VECTOR_ADDRESS (0x08000000)  // Initial vector position in flash
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) {
+    uint32_t *vectors = (uint32_t *)SCB->VTOR;
+    uint32_t i;
+
+    // Copy and switch to dynamic vectors if the first time called
+    if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) {
+        uint32_t *old_vectors = vectors;
+        vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
+        for (i=0; i<NVIC_NUM_VECTORS; i++) {
+            vectors[i] = old_vectors[i];
+        }
+        SCB->VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
+    }
+    vectors[IRQn + NVIC_USER_IRQ_OFFSET] = vector;
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+    uint32_t *vectors = (uint32_t*)SCB->VTOR;
+    return vectors[IRQn + NVIC_USER_IRQ_OFFSET];
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/cmsis_nvic.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,54 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */ 
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 98 vectors = 392 bytes from 0x40 to 0x1C7
+// Total: 114 vectors = 456 bytes (0x1C8) to be reserved in RAM
+#define NVIC_NUM_VECTORS      114
+#define NVIC_USER_IRQ_OFFSET  16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/hal_tick.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,140 @@
+/**
+  ******************************************************************************
+  * @file    hal_tick.c
+  * @author  MCD Application Team
+  * @brief   Initialization of HAL tick
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+#include "hal_tick.h"
+
+// 0=NO, 1=PG6 toggles at each tick
+#define DEBUG_TICK 0
+
+TIM_HandleTypeDef TimMasterHandle;
+uint32_t PreviousVal = 0;
+
+void HAL_IncTick(void);
+void us_ticker_irq_handler(void);
+
+void timer_irq_handler(void) {
+    // Channel 1 for mbed timeout
+    if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC1) == SET) {
+        __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
+        us_ticker_irq_handler();
+    }
+
+    // Channel 2 for HAL tick
+    if (__HAL_TIM_GET_ITSTATUS(&TimMasterHandle, TIM_IT_CC2) == SET) {
+        __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC2);
+        uint32_t val = __HAL_TIM_GetCounter(&TimMasterHandle);
+        if ((val - PreviousVal) >= HAL_TICK_DELAY) {
+            // Increment HAL variable
+            HAL_IncTick();
+            // Prepare next interrupt
+            __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, val + HAL_TICK_DELAY);
+            PreviousVal = val;
+#if DEBUG_TICK > 0
+            HAL_GPIO_TogglePin(GPIOG, GPIO_PIN_6);
+#endif
+        }
+    }
+}
+
+// Reconfigure the HAL tick using a standard timer instead of systick.
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority) {
+    RCC_ClkInitTypeDef RCC_ClkInitStruct;
+    uint32_t PclkFreq;
+
+    // Get clock configuration
+    // Note: PclkFreq contains here the Latency (not used after)
+    HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq);
+
+    // Get TIM5 clock value
+    PclkFreq = HAL_RCC_GetPCLK1Freq();
+
+    // Enable timer clock
+    TIM_MST_RCC;
+
+    // Reset timer
+    TIM_MST_RESET_ON;
+    TIM_MST_RESET_OFF;
+
+    // Configure time base
+    TimMasterHandle.Instance = TIM_MST;
+    TimMasterHandle.Init.Period = 0xFFFFFFFF;
+
+    // TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx
+    if (RCC_ClkInitStruct.APB1CLKDivider == RCC_HCLK_DIV1)
+      TimMasterHandle.Init.Prescaler = (uint16_t)((PclkFreq) / 1000000) - 1; // 1 us tick
+    else
+      TimMasterHandle.Init.Prescaler = (uint16_t)((PclkFreq * 2) / 1000000) - 1; // 1 us tick  
+
+    TimMasterHandle.Init.ClockDivision     = 0;
+    TimMasterHandle.Init.CounterMode       = TIM_COUNTERMODE_UP;
+    TimMasterHandle.Init.RepetitionCounter = 0;
+    HAL_TIM_OC_Init(&TimMasterHandle);
+
+    NVIC_SetVector(TIM_MST_IRQ, (uint32_t)timer_irq_handler);
+    NVIC_EnableIRQ(TIM_MST_IRQ);
+
+    // Channel 1 for mbed timeout
+    HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_1);
+
+    // Channel 2 for HAL tick
+    HAL_TIM_OC_Start(&TimMasterHandle, TIM_CHANNEL_2);
+    PreviousVal = __HAL_TIM_GetCounter(&TimMasterHandle);
+    __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_2, PreviousVal + HAL_TICK_DELAY);
+    __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+
+#if DEBUG_TICK > 0
+    __GPIOG_CLK_ENABLE();
+    GPIO_InitTypeDef GPIO_InitStruct;
+    GPIO_InitStruct.Pin = GPIO_PIN_6;
+    GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+    GPIO_InitStruct.Pull = GPIO_PULLUP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
+    HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
+#endif
+
+    return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/hal_tick.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,62 @@
+/**
+  ******************************************************************************
+  * @file    hal_tick.h
+  * @author  MCD Application Team
+  * @brief   Initialization of HAL tick
+  ******************************************************************************  
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */ 
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f7xx.h"
+#include "cmsis_nvic.h"
+   
+#define TIM_MST      TIM5
+#define TIM_MST_IRQ  TIM5_IRQn
+#define TIM_MST_RCC  __TIM5_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON   __TIM5_FORCE_RESET()
+#define TIM_MST_RESET_OFF  __TIM5_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/stm32f746xx.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,9479 @@
+/**
+  ******************************************************************************
+  * @file    stm32f746xx.h
+  * @author  MCD Application Team
+  * @version V1.0.2
+  * @date    21-September-2015
+  * @brief   CMSIS STM32F746xx Device Peripheral Access Layer Header File.
+  *
+  *          This file contains:
+  *           - Data structures and the address mapping for all peripherals
+  *           - Peripheral's registers declarations and bits definition
+  *           - Macros to access peripheral’s registers hardware
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS_Device
+  * @{
+  */
+
+/** @addtogroup stm32f746xx
+  * @{
+  */
+    
+#ifndef __STM32F746xx_H
+#define __STM32F746xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+  
+/** @addtogroup Configuration_section_for_CMSIS
+  * @{
+  */
+
+/**
+ * @brief STM32F7xx Interrupt Number Definition, according to the selected device 
+ *        in @ref Library_configuration_section 
+ */
+typedef enum
+{
+/******  Cortex-M7 Processor Exceptions Numbers ****************************************************************/
+  NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                                          */
+  MemoryManagement_IRQn       = -12,    /*!< 4 Cortex-M7 Memory Management Interrupt                           */
+  BusFault_IRQn               = -11,    /*!< 5 Cortex-M7 Bus Fault Interrupt                                   */
+  UsageFault_IRQn             = -10,    /*!< 6 Cortex-M7 Usage Fault Interrupt                                 */
+  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M7 SV Call Interrupt                                    */
+  DebugMonitor_IRQn           = -4,     /*!< 12 Cortex-M7 Debug Monitor Interrupt                              */
+  PendSV_IRQn                 = -2,     /*!< 14 Cortex-M7 Pend SV Interrupt                                    */
+  SysTick_IRQn                = -1,     /*!< 15 Cortex-M7 System Tick Interrupt                                */
+/******  STM32 specific Interrupt Numbers **********************************************************************/
+  WWDG_IRQn                   = 0,      /*!< Window WatchDog Interrupt                                         */
+  PVD_IRQn                    = 1,      /*!< PVD through EXTI Line detection Interrupt                         */
+  TAMP_STAMP_IRQn             = 2,      /*!< Tamper and TimeStamp interrupts through the EXTI line             */
+  RTC_WKUP_IRQn               = 3,      /*!< RTC Wakeup interrupt through the EXTI line                        */
+  FLASH_IRQn                  = 4,      /*!< FLASH global Interrupt                                            */
+  RCC_IRQn                    = 5,      /*!< RCC global Interrupt                                              */
+  EXTI0_IRQn                  = 6,      /*!< EXTI Line0 Interrupt                                              */
+  EXTI1_IRQn                  = 7,      /*!< EXTI Line1 Interrupt                                              */
+  EXTI2_IRQn                  = 8,      /*!< EXTI Line2 Interrupt                                              */
+  EXTI3_IRQn                  = 9,      /*!< EXTI Line3 Interrupt                                              */
+  EXTI4_IRQn                  = 10,     /*!< EXTI Line4 Interrupt                                              */
+  DMA1_Stream0_IRQn           = 11,     /*!< DMA1 Stream 0 global Interrupt                                    */
+  DMA1_Stream1_IRQn           = 12,     /*!< DMA1 Stream 1 global Interrupt                                    */
+  DMA1_Stream2_IRQn           = 13,     /*!< DMA1 Stream 2 global Interrupt                                    */
+  DMA1_Stream3_IRQn           = 14,     /*!< DMA1 Stream 3 global Interrupt                                    */
+  DMA1_Stream4_IRQn           = 15,     /*!< DMA1 Stream 4 global Interrupt                                    */
+  DMA1_Stream5_IRQn           = 16,     /*!< DMA1 Stream 5 global Interrupt                                    */
+  DMA1_Stream6_IRQn           = 17,     /*!< DMA1 Stream 6 global Interrupt                                    */
+  ADC_IRQn                    = 18,     /*!< ADC1, ADC2 and ADC3 global Interrupts                             */
+  CAN1_TX_IRQn                = 19,     /*!< CAN1 TX Interrupt                                                 */
+  CAN1_RX0_IRQn               = 20,     /*!< CAN1 RX0 Interrupt                                                */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                                */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                                */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                                     */
+  TIM1_BRK_TIM9_IRQn          = 24,     /*!< TIM1 Break interrupt and TIM9 global interrupt                    */
+  TIM1_UP_TIM10_IRQn          = 25,     /*!< TIM1 Update Interrupt and TIM10 global interrupt                  */
+  TIM1_TRG_COM_TIM11_IRQn     = 26,     /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                                    */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                             */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                             */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                             */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                              */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                              */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                              */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                              */  
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                             */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                             */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                                           */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                                           */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                                           */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                                   */
+  RTC_Alarm_IRQn              = 41,     /*!< RTC Alarm (A and B) through EXTI Line Interrupt                   */
+  OTG_FS_WKUP_IRQn            = 42,     /*!< USB OTG FS Wakeup through EXTI line interrupt                     */    
+  TIM8_BRK_TIM12_IRQn         = 43,     /*!< TIM8 Break Interrupt and TIM12 global interrupt                   */
+  TIM8_UP_TIM13_IRQn          = 44,     /*!< TIM8 Update Interrupt and TIM13 global interrupt                  */
+  TIM8_TRG_COM_TIM14_IRQn     = 45,     /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+  TIM8_CC_IRQn                = 46,     /*!< TIM8 Capture Compare Interrupt                                    */
+  DMA1_Stream7_IRQn           = 47,     /*!< DMA1 Stream7 Interrupt                                            */
+  FMC_IRQn                    = 48,     /*!< FMC global Interrupt                                              */
+  SDMMC1_IRQn                 = 49,     /*!< SDMMC1 global Interrupt                                           */
+  TIM5_IRQn                   = 50,     /*!< TIM5 global Interrupt                                             */
+  SPI3_IRQn                   = 51,     /*!< SPI3 global Interrupt                                             */
+  UART4_IRQn                  = 52,     /*!< UART4 global Interrupt                                            */
+  UART5_IRQn                  = 53,     /*!< UART5 global Interrupt                                            */
+  TIM6_DAC_IRQn               = 54,     /*!< TIM6 global and DAC1&2 underrun error  interrupts                 */
+  TIM7_IRQn                   = 55,     /*!< TIM7 global interrupt                                             */
+  DMA2_Stream0_IRQn           = 56,     /*!< DMA2 Stream 0 global Interrupt                                    */
+  DMA2_Stream1_IRQn           = 57,     /*!< DMA2 Stream 1 global Interrupt                                    */
+  DMA2_Stream2_IRQn           = 58,     /*!< DMA2 Stream 2 global Interrupt                                    */
+  DMA2_Stream3_IRQn           = 59,     /*!< DMA2 Stream 3 global Interrupt                                    */
+  DMA2_Stream4_IRQn           = 60,     /*!< DMA2 Stream 4 global Interrupt                                    */
+  ETH_IRQn                    = 61,     /*!< Ethernet global Interrupt                                         */
+  ETH_WKUP_IRQn               = 62,     /*!< Ethernet Wakeup through EXTI line Interrupt                       */
+  CAN2_TX_IRQn                = 63,     /*!< CAN2 TX Interrupt                                                 */
+  CAN2_RX0_IRQn               = 64,     /*!< CAN2 RX0 Interrupt                                                */
+  CAN2_RX1_IRQn               = 65,     /*!< CAN2 RX1 Interrupt                                                */
+  CAN2_SCE_IRQn               = 66,     /*!< CAN2 SCE Interrupt                                                */
+  OTG_FS_IRQn                 = 67,     /*!< USB OTG FS global Interrupt                                       */
+  DMA2_Stream5_IRQn           = 68,     /*!< DMA2 Stream 5 global interrupt                                    */
+  DMA2_Stream6_IRQn           = 69,     /*!< DMA2 Stream 6 global interrupt                                    */
+  DMA2_Stream7_IRQn           = 70,     /*!< DMA2 Stream 7 global interrupt                                    */
+  USART6_IRQn                 = 71,     /*!< USART6 global interrupt                                           */
+  I2C3_EV_IRQn                = 72,     /*!< I2C3 event interrupt                                              */
+  I2C3_ER_IRQn                = 73,     /*!< I2C3 error interrupt                                              */
+  OTG_HS_EP1_OUT_IRQn         = 74,     /*!< USB OTG HS End Point 1 Out global interrupt                       */
+  OTG_HS_EP1_IN_IRQn          = 75,     /*!< USB OTG HS End Point 1 In global interrupt                        */
+  OTG_HS_WKUP_IRQn            = 76,     /*!< USB OTG HS Wakeup through EXTI interrupt                          */
+  OTG_HS_IRQn                 = 77,     /*!< USB OTG HS global interrupt                                       */
+  DCMI_IRQn                   = 78,     /*!< DCMI global interrupt                                             */
+  RNG_IRQn                    = 80,     /*!< RNG global interrupt                                              */
+  FPU_IRQn                    = 81,     /*!< FPU global interrupt                                              */
+  UART7_IRQn                  = 82,     /*!< UART7 global interrupt                                            */
+  UART8_IRQn                  = 83,     /*!< UART8 global interrupt                                            */
+  SPI4_IRQn                   = 84,     /*!< SPI4 global Interrupt                                             */
+  SPI5_IRQn                   = 85,     /*!< SPI5 global Interrupt                                             */
+  SPI6_IRQn                   = 86,     /*!< SPI6 global Interrupt                                             */
+  SAI1_IRQn                   = 87,     /*!< SAI1 global Interrupt                                             */
+  LTDC_IRQn                   = 88,     /*!< LTDC global Interrupt                                             */
+  LTDC_ER_IRQn                = 89,     /*!< LTDC Error global Interrupt                                       */
+  DMA2D_IRQn                  = 90,     /*!< DMA2D global Interrupt                                            */
+  SAI2_IRQn                   = 91,     /*!< SAI2 global Interrupt                                             */
+  QUADSPI_IRQn                = 92,     /*!< Quad SPI global interrupt                                         */
+  LPTIM1_IRQn                 = 93,     /*!< LP TIM1 interrupt                                                 */
+  CEC_IRQn                    = 94,     /*!< HDMI-CEC global Interrupt                                         */
+  I2C4_EV_IRQn                = 95,     /*!< I2C4 Event Interrupt                                              */
+  I2C4_ER_IRQn                = 96,     /*!< I2C4 Error Interrupt                                              */
+  SPDIF_RX_IRQn               = 97      /*!< SPDIF-RX global Interrupt                                         */  
+} IRQn_Type;
+
+/**
+  * @}
+  */
+
+/**
+ * @brief Configuration of the Cortex-M7 Processor and Core Peripherals 
+ */
+#define __CM7_REV                 0x0001  /*!< Cortex-M7 revision r0p1                       */
+#define __MPU_PRESENT             1       /*!< CM7 provides an MPU                           */
+#define __NVIC_PRIO_BITS          4       /*!< CM7 uses 4 Bits for the Priority Levels       */
+#define __Vendor_SysTickConfig    0       /*!< Set to 1 if different SysTick Config is used  */
+#define __FPU_PRESENT             1       /*!< FPU present                                   */
+#define __ICACHE_PRESENT          1       /*!< CM7 instruction cache present                 */
+#define __DCACHE_PRESENT          1       /*!< CM7 data cache present                        */
+#include "core_cm7.h"                     /*!< Cortex-M7 processor and core peripherals      */
+  
+  
+#include "system_stm32f7xx.h"
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+  * @{
+  */   
+
+/** 
+  * @brief Analog to Digital Converter  
+  */
+
+typedef struct
+{
+  __IO uint32_t SR;     /*!< ADC status register,                         Address offset: 0x00 */
+  __IO uint32_t CR1;    /*!< ADC control register 1,                      Address offset: 0x04 */      
+  __IO uint32_t CR2;    /*!< ADC control register 2,                      Address offset: 0x08 */
+  __IO uint32_t SMPR1;  /*!< ADC sample time register 1,                  Address offset: 0x0C */
+  __IO uint32_t SMPR2;  /*!< ADC sample time register 2,                  Address offset: 0x10 */
+  __IO uint32_t JOFR1;  /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+  __IO uint32_t JOFR2;  /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+  __IO uint32_t JOFR3;  /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+  __IO uint32_t JOFR4;  /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+  __IO uint32_t HTR;    /*!< ADC watchdog higher threshold register,      Address offset: 0x24 */
+  __IO uint32_t LTR;    /*!< ADC watchdog lower threshold register,       Address offset: 0x28 */
+  __IO uint32_t SQR1;   /*!< ADC regular sequence register 1,             Address offset: 0x2C */
+  __IO uint32_t SQR2;   /*!< ADC regular sequence register 2,             Address offset: 0x30 */
+  __IO uint32_t SQR3;   /*!< ADC regular sequence register 3,             Address offset: 0x34 */
+  __IO uint32_t JSQR;   /*!< ADC injected sequence register,              Address offset: 0x38*/
+  __IO uint32_t JDR1;   /*!< ADC injected data register 1,                Address offset: 0x3C */
+  __IO uint32_t JDR2;   /*!< ADC injected data register 2,                Address offset: 0x40 */
+  __IO uint32_t JDR3;   /*!< ADC injected data register 3,                Address offset: 0x44 */
+  __IO uint32_t JDR4;   /*!< ADC injected data register 4,                Address offset: 0x48 */
+  __IO uint32_t DR;     /*!< ADC regular data register,                   Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t CSR;    /*!< ADC Common status register,                  Address offset: ADC1 base address + 0x300 */
+  __IO uint32_t CCR;    /*!< ADC common control register,                 Address offset: ADC1 base address + 0x304 */
+  __IO uint32_t CDR;    /*!< ADC common regular data register for dual
+                             AND triple modes,                            Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+
+/** 
+  * @brief Controller Area Network TxMailBox 
+  */
+
+typedef struct
+{
+  __IO uint32_t TIR;  /*!< CAN TX mailbox identifier register */
+  __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+  __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+  __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/** 
+  * @brief Controller Area Network FIFOMailBox 
+  */
+  
+typedef struct
+{
+  __IO uint32_t RIR;  /*!< CAN receive FIFO mailbox identifier register */
+  __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+  __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+  __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/** 
+  * @brief Controller Area Network FilterRegister 
+  */
+  
+typedef struct
+{
+  __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+  __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/** 
+  * @brief Controller Area Network 
+  */
+  
+typedef struct
+{
+  __IO uint32_t              MCR;                 /*!< CAN master control register,         Address offset: 0x00          */
+  __IO uint32_t              MSR;                 /*!< CAN master status register,          Address offset: 0x04          */
+  __IO uint32_t              TSR;                 /*!< CAN transmit status register,        Address offset: 0x08          */
+  __IO uint32_t              RF0R;                /*!< CAN receive FIFO 0 register,         Address offset: 0x0C          */
+  __IO uint32_t              RF1R;                /*!< CAN receive FIFO 1 register,         Address offset: 0x10          */
+  __IO uint32_t              IER;                 /*!< CAN interrupt enable register,       Address offset: 0x14          */
+  __IO uint32_t              ESR;                 /*!< CAN error status register,           Address offset: 0x18          */
+  __IO uint32_t              BTR;                 /*!< CAN bit timing register,             Address offset: 0x1C          */
+  uint32_t                   RESERVED0[88];       /*!< Reserved, 0x020 - 0x17F                                            */
+  CAN_TxMailBox_TypeDef      sTxMailBox[3];       /*!< CAN Tx MailBox,                      Address offset: 0x180 - 0x1AC */
+  CAN_FIFOMailBox_TypeDef    sFIFOMailBox[2];     /*!< CAN FIFO MailBox,                    Address offset: 0x1B0 - 0x1CC */
+  uint32_t                   RESERVED1[12];       /*!< Reserved, 0x1D0 - 0x1FF                                            */
+  __IO uint32_t              FMR;                 /*!< CAN filter master register,          Address offset: 0x200         */
+  __IO uint32_t              FM1R;                /*!< CAN filter mode register,            Address offset: 0x204         */
+  uint32_t                   RESERVED2;           /*!< Reserved, 0x208                                                    */
+  __IO uint32_t              FS1R;                /*!< CAN filter scale register,           Address offset: 0x20C         */
+  uint32_t                   RESERVED3;           /*!< Reserved, 0x210                                                    */
+  __IO uint32_t              FFA1R;               /*!< CAN filter FIFO assignment register, Address offset: 0x214         */
+  uint32_t                   RESERVED4;           /*!< Reserved, 0x218                                                    */
+  __IO uint32_t              FA1R;                /*!< CAN filter activation register,      Address offset: 0x21C         */
+  uint32_t                   RESERVED5[8];        /*!< Reserved, 0x220-0x23F                                              */ 
+  CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register,                 Address offset: 0x240-0x31C   */
+} CAN_TypeDef;
+
+/** 
+  * @brief HDMI-CEC 
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;           /*!< CEC control register,                                       Address offset:0x00 */
+  __IO uint32_t CFGR;         /*!< CEC configuration register,                                 Address offset:0x04 */
+  __IO uint32_t TXDR;         /*!< CEC Tx data register ,                                      Address offset:0x08 */
+  __IO uint32_t RXDR;         /*!< CEC Rx Data Register,                                       Address offset:0x0C */
+  __IO uint32_t ISR;          /*!< CEC Interrupt and Status Register,                          Address offset:0x10 */
+  __IO uint32_t IER;          /*!< CEC interrupt enable register,                              Address offset:0x14 */
+}CEC_TypeDef;
+
+
+/** 
+  * @brief CRC calculation unit 
+  */
+
+typedef struct
+{
+  __IO uint32_t  DR;          /*!< CRC Data register,                           Address offset: 0x00 */
+  __IO uint8_t   IDR;         /*!< CRC Independent data register,               Address offset: 0x04 */
+  uint8_t        RESERVED0;   /*!< Reserved, 0x05                                                    */
+  uint16_t       RESERVED1;   /*!< Reserved, 0x06                                                    */
+  __IO uint32_t  CR;          /*!< CRC Control register,                        Address offset: 0x08 */
+  uint32_t       RESERVED2;   /*!< Reserved,                                                    0x0C */
+  __IO uint32_t  INIT;        /*!< Initial CRC value register,                  Address offset: 0x10 */
+  __IO uint32_t  POL;         /*!< CRC polynomial register,                     Address offset: 0x14 */
+} CRC_TypeDef;
+
+/** 
+  * @brief Digital to Analog Converter
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;       /*!< DAC control register,                                    Address offset: 0x00 */
+  __IO uint32_t SWTRIGR;  /*!< DAC software trigger register,                           Address offset: 0x04 */
+  __IO uint32_t DHR12R1;  /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+  __IO uint32_t DHR12L1;  /*!< DAC channel1 12-bit left aligned data holding register,  Address offset: 0x0C */
+  __IO uint32_t DHR8R1;   /*!< DAC channel1 8-bit right aligned data holding register,  Address offset: 0x10 */
+  __IO uint32_t DHR12R2;  /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+  __IO uint32_t DHR12L2;  /*!< DAC channel2 12-bit left aligned data holding register,  Address offset: 0x18 */
+  __IO uint32_t DHR8R2;   /*!< DAC channel2 8-bit right-aligned data holding register,  Address offset: 0x1C */
+  __IO uint32_t DHR12RD;  /*!< Dual DAC 12-bit right-aligned data holding register,     Address offset: 0x20 */
+  __IO uint32_t DHR12LD;  /*!< DUAL DAC 12-bit left aligned data holding register,      Address offset: 0x24 */
+  __IO uint32_t DHR8RD;   /*!< DUAL DAC 8-bit right aligned data holding register,      Address offset: 0x28 */
+  __IO uint32_t DOR1;     /*!< DAC channel1 data output register,                       Address offset: 0x2C */
+  __IO uint32_t DOR2;     /*!< DAC channel2 data output register,                       Address offset: 0x30 */
+  __IO uint32_t SR;       /*!< DAC status register,                                     Address offset: 0x34 */
+} DAC_TypeDef;
+
+
+/** 
+  * @brief Debug MCU
+  */
+
+typedef struct
+{
+  __IO uint32_t IDCODE;  /*!< MCU device ID code,               Address offset: 0x00 */
+  __IO uint32_t CR;      /*!< Debug MCU configuration register, Address offset: 0x04 */
+  __IO uint32_t APB1FZ;  /*!< Debug MCU APB1 freeze register,   Address offset: 0x08 */
+  __IO uint32_t APB2FZ;  /*!< Debug MCU APB2 freeze register,   Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/** 
+  * @brief DCMI
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;       /*!< DCMI control register 1,                       Address offset: 0x00 */
+  __IO uint32_t SR;       /*!< DCMI status register,                          Address offset: 0x04 */
+  __IO uint32_t RISR;     /*!< DCMI raw interrupt status register,            Address offset: 0x08 */
+  __IO uint32_t IER;      /*!< DCMI interrupt enable register,                Address offset: 0x0C */
+  __IO uint32_t MISR;     /*!< DCMI masked interrupt status register,         Address offset: 0x10 */
+  __IO uint32_t ICR;      /*!< DCMI interrupt clear register,                 Address offset: 0x14 */
+  __IO uint32_t ESCR;     /*!< DCMI embedded synchronization code register,   Address offset: 0x18 */
+  __IO uint32_t ESUR;     /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */
+  __IO uint32_t CWSTRTR;  /*!< DCMI crop window start,                        Address offset: 0x20 */
+  __IO uint32_t CWSIZER;  /*!< DCMI crop window size,                         Address offset: 0x24 */
+  __IO uint32_t DR;       /*!< DCMI data register,                            Address offset: 0x28 */
+} DCMI_TypeDef;
+
+/** 
+  * @brief DMA Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;     /*!< DMA stream x configuration register      */
+  __IO uint32_t NDTR;   /*!< DMA stream x number of data register     */
+  __IO uint32_t PAR;    /*!< DMA stream x peripheral address register */
+  __IO uint32_t M0AR;   /*!< DMA stream x memory 0 address register   */
+  __IO uint32_t M1AR;   /*!< DMA stream x memory 1 address register   */
+  __IO uint32_t FCR;    /*!< DMA stream x FIFO control register       */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t LISR;   /*!< DMA low interrupt status register,      Address offset: 0x00 */
+  __IO uint32_t HISR;   /*!< DMA high interrupt status register,     Address offset: 0x04 */
+  __IO uint32_t LIFCR;  /*!< DMA low interrupt flag clear register,  Address offset: 0x08 */
+  __IO uint32_t HIFCR;  /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/** 
+  * @brief DMA2D Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;            /*!< DMA2D Control Register,                         Address offset: 0x00 */
+  __IO uint32_t ISR;           /*!< DMA2D Interrupt Status Register,                Address offset: 0x04 */
+  __IO uint32_t IFCR;          /*!< DMA2D Interrupt Flag Clear Register,            Address offset: 0x08 */
+  __IO uint32_t FGMAR;         /*!< DMA2D Foreground Memory Address Register,       Address offset: 0x0C */
+  __IO uint32_t FGOR;          /*!< DMA2D Foreground Offset Register,               Address offset: 0x10 */
+  __IO uint32_t BGMAR;         /*!< DMA2D Background Memory Address Register,       Address offset: 0x14 */
+  __IO uint32_t BGOR;          /*!< DMA2D Background Offset Register,               Address offset: 0x18 */
+  __IO uint32_t FGPFCCR;       /*!< DMA2D Foreground PFC Control Register,          Address offset: 0x1C */
+  __IO uint32_t FGCOLR;        /*!< DMA2D Foreground Color Register,                Address offset: 0x20 */
+  __IO uint32_t BGPFCCR;       /*!< DMA2D Background PFC Control Register,          Address offset: 0x24 */
+  __IO uint32_t BGCOLR;        /*!< DMA2D Background Color Register,                Address offset: 0x28 */
+  __IO uint32_t FGCMAR;        /*!< DMA2D Foreground CLUT Memory Address Register,  Address offset: 0x2C */
+  __IO uint32_t BGCMAR;        /*!< DMA2D Background CLUT Memory Address Register,  Address offset: 0x30 */
+  __IO uint32_t OPFCCR;        /*!< DMA2D Output PFC Control Register,              Address offset: 0x34 */
+  __IO uint32_t OCOLR;         /*!< DMA2D Output Color Register,                    Address offset: 0x38 */
+  __IO uint32_t OMAR;          /*!< DMA2D Output Memory Address Register,           Address offset: 0x3C */
+  __IO uint32_t OOR;           /*!< DMA2D Output Offset Register,                   Address offset: 0x40 */
+  __IO uint32_t NLR;           /*!< DMA2D Number of Line Register,                  Address offset: 0x44 */
+  __IO uint32_t LWR;           /*!< DMA2D Line Watermark Register,                  Address offset: 0x48 */
+  __IO uint32_t AMTCR;         /*!< DMA2D AHB Master Timer Configuration Register,  Address offset: 0x4C */
+  uint32_t      RESERVED[236]; /*!< Reserved, 0x50-0x3FF */
+  __IO uint32_t FGCLUT[256];   /*!< DMA2D Foreground CLUT,                          Address offset:400-7FF */
+  __IO uint32_t BGCLUT[256];   /*!< DMA2D Background CLUT,                          Address offset:800-BFF */
+} DMA2D_TypeDef;
+
+
+/** 
+  * @brief Ethernet MAC
+  */
+
+typedef struct
+{
+  __IO uint32_t MACCR;
+  __IO uint32_t MACFFR;
+  __IO uint32_t MACHTHR;
+  __IO uint32_t MACHTLR;
+  __IO uint32_t MACMIIAR;
+  __IO uint32_t MACMIIDR;
+  __IO uint32_t MACFCR;
+  __IO uint32_t MACVLANTR;             /*    8 */
+  uint32_t      RESERVED0[2];
+  __IO uint32_t MACRWUFFR;             /*   11 */
+  __IO uint32_t MACPMTCSR;
+  uint32_t      RESERVED1[2];
+  __IO uint32_t MACSR;                 /*   15 */
+  __IO uint32_t MACIMR;
+  __IO uint32_t MACA0HR;
+  __IO uint32_t MACA0LR;
+  __IO uint32_t MACA1HR;
+  __IO uint32_t MACA1LR;
+  __IO uint32_t MACA2HR;
+  __IO uint32_t MACA2LR;
+  __IO uint32_t MACA3HR;
+  __IO uint32_t MACA3LR;               /*   24 */
+  uint32_t      RESERVED2[40];
+  __IO uint32_t MMCCR;                 /*   65 */
+  __IO uint32_t MMCRIR;
+  __IO uint32_t MMCTIR;
+  __IO uint32_t MMCRIMR;
+  __IO uint32_t MMCTIMR;               /*   69 */
+  uint32_t      RESERVED3[14];
+  __IO uint32_t MMCTGFSCCR;            /*   84 */
+  __IO uint32_t MMCTGFMSCCR;
+  uint32_t      RESERVED4[5];
+  __IO uint32_t MMCTGFCR;
+  uint32_t      RESERVED5[10];
+  __IO uint32_t MMCRFCECR;
+  __IO uint32_t MMCRFAECR;
+  uint32_t      RESERVED6[10];
+  __IO uint32_t MMCRGUFCR;
+  uint32_t      RESERVED7[334];
+  __IO uint32_t PTPTSCR;
+  __IO uint32_t PTPSSIR;
+  __IO uint32_t PTPTSHR;
+  __IO uint32_t PTPTSLR;
+  __IO uint32_t PTPTSHUR;
+  __IO uint32_t PTPTSLUR;
+  __IO uint32_t PTPTSAR;
+  __IO uint32_t PTPTTHR;
+  __IO uint32_t PTPTTLR;
+  __IO uint32_t RESERVED8;
+  __IO uint32_t PTPTSSR;
+  uint32_t      RESERVED9[565];
+  __IO uint32_t DMABMR;
+  __IO uint32_t DMATPDR;
+  __IO uint32_t DMARPDR;
+  __IO uint32_t DMARDLAR;
+  __IO uint32_t DMATDLAR;
+  __IO uint32_t DMASR;
+  __IO uint32_t DMAOMR;
+  __IO uint32_t DMAIER;
+  __IO uint32_t DMAMFBOCR;
+  __IO uint32_t DMARSWTR;
+  uint32_t      RESERVED10[8];
+  __IO uint32_t DMACHTDR;
+  __IO uint32_t DMACHRDR;
+  __IO uint32_t DMACHTBAR;
+  __IO uint32_t DMACHRBAR;
+} ETH_TypeDef;
+
+/** 
+  * @brief External Interrupt/Event Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t IMR;    /*!< EXTI Interrupt mask register,            Address offset: 0x00 */
+  __IO uint32_t EMR;    /*!< EXTI Event mask register,                Address offset: 0x04 */
+  __IO uint32_t RTSR;   /*!< EXTI Rising trigger selection register,  Address offset: 0x08 */
+  __IO uint32_t FTSR;   /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+  __IO uint32_t SWIER;  /*!< EXTI Software interrupt event register,  Address offset: 0x10 */
+  __IO uint32_t PR;     /*!< EXTI Pending register,                   Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/** 
+  * @brief FLASH Registers
+  */
+
+typedef struct
+{
+  __IO uint32_t ACR;      /*!< FLASH access control register,     Address offset: 0x00 */
+  __IO uint32_t KEYR;     /*!< FLASH key register,                Address offset: 0x04 */
+  __IO uint32_t OPTKEYR;  /*!< FLASH option key register,         Address offset: 0x08 */
+  __IO uint32_t SR;       /*!< FLASH status register,             Address offset: 0x0C */
+  __IO uint32_t CR;       /*!< FLASH control register,            Address offset: 0x10 */
+  __IO uint32_t OPTCR;    /*!< FLASH option control register ,    Address offset: 0x14 */
+  __IO uint32_t OPTCR1;   /*!< FLASH option control register 1 ,  Address offset: 0x18 */
+} FLASH_TypeDef;
+
+
+
+/** 
+  * @brief Flexible Memory Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t BTCR[8];    /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */   
+} FMC_Bank1_TypeDef; 
+
+/** 
+  * @brief Flexible Memory Controller Bank1E
+  */
+  
+typedef struct
+{
+  __IO uint32_t BWTR[7];    /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FMC_Bank1E_TypeDef;
+
+/** 
+  * @brief Flexible Memory Controller Bank3
+  */
+  
+typedef struct
+{
+  __IO uint32_t PCR;        /*!< NAND Flash control register,                       Address offset: 0x80 */
+  __IO uint32_t SR;         /*!< NAND Flash FIFO status and interrupt register,     Address offset: 0x84 */
+  __IO uint32_t PMEM;       /*!< NAND Flash Common memory space timing register,    Address offset: 0x88 */
+  __IO uint32_t PATT;       /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */
+  uint32_t      RESERVED0;  /*!< Reserved, 0x90                                                          */
+  __IO uint32_t ECCR;       /*!< NAND Flash ECC result registers,                   Address offset: 0x94 */
+} FMC_Bank3_TypeDef;
+ 
+/** 
+  * @brief Flexible Memory Controller Bank5_6
+  */
+  
+typedef struct
+{
+  __IO uint32_t SDCR[2];        /*!< SDRAM Control registers ,      Address offset: 0x140-0x144  */
+  __IO uint32_t SDTR[2];        /*!< SDRAM Timing registers ,       Address offset: 0x148-0x14C  */
+  __IO uint32_t SDCMR;       /*!< SDRAM Command Mode register,    Address offset: 0x150  */
+  __IO uint32_t SDRTR;       /*!< SDRAM Refresh Timer register,   Address offset: 0x154  */
+  __IO uint32_t SDSR;        /*!< SDRAM Status register,          Address offset: 0x158  */
+} FMC_Bank5_6_TypeDef; 
+
+
+/** 
+  * @brief General Purpose I/O
+  */
+
+typedef struct
+{
+  __IO uint32_t MODER;    /*!< GPIO port mode register,               Address offset: 0x00      */
+  __IO uint32_t OTYPER;   /*!< GPIO port output type register,        Address offset: 0x04      */
+  __IO uint32_t OSPEEDR;  /*!< GPIO port output speed register,       Address offset: 0x08      */
+  __IO uint32_t PUPDR;    /*!< GPIO port pull-up/pull-down register,  Address offset: 0x0C      */
+  __IO uint32_t IDR;      /*!< GPIO port input data register,         Address offset: 0x10      */
+  __IO uint32_t ODR;      /*!< GPIO port output data register,        Address offset: 0x14      */
+  __IO uint32_t BSRR;     /*!< GPIO port bit set/reset register,      Address offset: 0x18      */
+  __IO uint32_t LCKR;     /*!< GPIO port configuration lock register, Address offset: 0x1C      */
+  __IO uint32_t AFR[2];   /*!< GPIO alternate function registers,     Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/** 
+  * @brief System configuration controller
+  */
+  
+typedef struct
+{
+  __IO uint32_t MEMRMP;       /*!< SYSCFG memory remap register,                      Address offset: 0x00      */
+  __IO uint32_t PMC;          /*!< SYSCFG peripheral mode configuration register,     Address offset: 0x04      */
+  __IO uint32_t EXTICR[4];    /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+  uint32_t      RESERVED[2];  /*!< Reserved, 0x18-0x1C                                                          */ 
+  __IO uint32_t CMPCR;        /*!< SYSCFG Compensation cell control register,         Address offset: 0x20      */
+} SYSCFG_TypeDef;
+
+/** 
+  * @brief Inter-integrated Circuit Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t CR1;      /*!< I2C Control register 1,            Address offset: 0x00 */
+  __IO uint32_t CR2;      /*!< I2C Control register 2,            Address offset: 0x04 */  
+  __IO uint32_t OAR1;     /*!< I2C Own address 1 register,        Address offset: 0x08 */
+  __IO uint32_t OAR2;     /*!< I2C Own address 2 register,        Address offset: 0x0C */
+  __IO uint32_t TIMINGR;  /*!< I2C Timing register,               Address offset: 0x10 */
+  __IO uint32_t TIMEOUTR; /*!< I2C Timeout register,              Address offset: 0x14 */
+  __IO uint32_t ISR;      /*!< I2C Interrupt and status register, Address offset: 0x18 */
+  __IO uint32_t ICR;      /*!< I2C Interrupt clear register,      Address offset: 0x1C */
+  __IO uint32_t PECR;     /*!< I2C PEC register,                  Address offset: 0x20 */
+  __IO uint32_t RXDR;     /*!< I2C Receive data register,         Address offset: 0x24 */
+  __IO uint32_t TXDR;     /*!< I2C Transmit data register,        Address offset: 0x28 */  
+} I2C_TypeDef;
+
+/** 
+  * @brief Independent WATCHDOG
+  */
+
+typedef struct
+{
+  __IO uint32_t KR;   /*!< IWDG Key register,       Address offset: 0x00 */
+  __IO uint32_t PR;   /*!< IWDG Prescaler register, Address offset: 0x04 */
+  __IO uint32_t RLR;  /*!< IWDG Reload register,    Address offset: 0x08 */
+  __IO uint32_t SR;   /*!< IWDG Status register,    Address offset: 0x0C */
+  __IO uint32_t WINR; /*!< IWDG Window register,    Address offset: 0x10 */
+} IWDG_TypeDef;
+
+
+/** 
+  * @brief LCD-TFT Display Controller
+  */
+  
+typedef struct
+{
+  uint32_t      RESERVED0[2];  /*!< Reserved, 0x00-0x04 */
+  __IO uint32_t SSCR;          /*!< LTDC Synchronization Size Configuration Register,    Address offset: 0x08 */
+  __IO uint32_t BPCR;          /*!< LTDC Back Porch Configuration Register,              Address offset: 0x0C */
+  __IO uint32_t AWCR;          /*!< LTDC Active Width Configuration Register,            Address offset: 0x10 */
+  __IO uint32_t TWCR;          /*!< LTDC Total Width Configuration Register,             Address offset: 0x14 */
+  __IO uint32_t GCR;           /*!< LTDC Global Control Register,                        Address offset: 0x18 */
+  uint32_t      RESERVED1[2];  /*!< Reserved, 0x1C-0x20 */
+  __IO uint32_t SRCR;          /*!< LTDC Shadow Reload Configuration Register,           Address offset: 0x24 */
+  uint32_t      RESERVED2[1];  /*!< Reserved, 0x28 */
+  __IO uint32_t BCCR;          /*!< LTDC Background Color Configuration Register,        Address offset: 0x2C */
+  uint32_t      RESERVED3[1];  /*!< Reserved, 0x30 */
+  __IO uint32_t IER;           /*!< LTDC Interrupt Enable Register,                      Address offset: 0x34 */
+  __IO uint32_t ISR;           /*!< LTDC Interrupt Status Register,                      Address offset: 0x38 */
+  __IO uint32_t ICR;           /*!< LTDC Interrupt Clear Register,                       Address offset: 0x3C */
+  __IO uint32_t LIPCR;         /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */
+  __IO uint32_t CPSR;          /*!< LTDC Current Position Status Register,               Address offset: 0x44 */
+  __IO uint32_t CDSR;         /*!< LTDC Current Display Status Register,                 Address offset: 0x48 */
+} LTDC_TypeDef;  
+
+/** 
+  * @brief LCD-TFT Display layer x Controller
+  */
+  
+typedef struct
+{  
+  __IO uint32_t CR;            /*!< LTDC Layerx Control Register                                  Address offset: 0x84 */
+  __IO uint32_t WHPCR;         /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */
+  __IO uint32_t WVPCR;         /*!< LTDC Layerx Window Vertical Position Configuration Register   Address offset: 0x8C */
+  __IO uint32_t CKCR;          /*!< LTDC Layerx Color Keying Configuration Register               Address offset: 0x90 */
+  __IO uint32_t PFCR;          /*!< LTDC Layerx Pixel Format Configuration Register               Address offset: 0x94 */
+  __IO uint32_t CACR;          /*!< LTDC Layerx Constant Alpha Configuration Register             Address offset: 0x98 */
+  __IO uint32_t DCCR;          /*!< LTDC Layerx Default Color Configuration Register              Address offset: 0x9C */
+  __IO uint32_t BFCR;          /*!< LTDC Layerx Blending Factors Configuration Register           Address offset: 0xA0 */
+  uint32_t      RESERVED0[2];  /*!< Reserved */
+  __IO uint32_t CFBAR;         /*!< LTDC Layerx Color Frame Buffer Address Register               Address offset: 0xAC */
+  __IO uint32_t CFBLR;         /*!< LTDC Layerx Color Frame Buffer Length Register                Address offset: 0xB0 */
+  __IO uint32_t CFBLNR;        /*!< LTDC Layerx ColorFrame Buffer Line Number Register            Address offset: 0xB4 */
+  uint32_t      RESERVED1[3];  /*!< Reserved */
+  __IO uint32_t CLUTWR;        /*!< LTDC Layerx CLUT Write Register                               Address offset: 0x144 */
+
+} LTDC_Layer_TypeDef;
+
+/** 
+  * @brief Power Control
+  */
+
+typedef struct
+{
+  __IO uint32_t CR1;   /*!< PWR power control register 1,        Address offset: 0x00 */
+  __IO uint32_t CSR1;  /*!< PWR power control/status register 2, Address offset: 0x04 */
+  __IO uint32_t CR2;   /*!< PWR power control register 2,        Address offset: 0x08 */
+  __IO uint32_t CSR2;  /*!< PWR power control/status register 2, Address offset: 0x0C */
+} PWR_TypeDef;
+
+
+/** 
+  * @brief Reset and Clock Control
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;            /*!< RCC clock control register,                                  Address offset: 0x00 */
+  __IO uint32_t PLLCFGR;       /*!< RCC PLL configuration register,                              Address offset: 0x04 */
+  __IO uint32_t CFGR;          /*!< RCC clock configuration register,                            Address offset: 0x08 */
+  __IO uint32_t CIR;           /*!< RCC clock interrupt register,                                Address offset: 0x0C */
+  __IO uint32_t AHB1RSTR;      /*!< RCC AHB1 peripheral reset register,                          Address offset: 0x10 */
+  __IO uint32_t AHB2RSTR;      /*!< RCC AHB2 peripheral reset register,                          Address offset: 0x14 */
+  __IO uint32_t AHB3RSTR;      /*!< RCC AHB3 peripheral reset register,                          Address offset: 0x18 */
+  uint32_t      RESERVED0;     /*!< Reserved, 0x1C                                                                    */
+  __IO uint32_t APB1RSTR;      /*!< RCC APB1 peripheral reset register,                          Address offset: 0x20 */
+  __IO uint32_t APB2RSTR;      /*!< RCC APB2 peripheral reset register,                          Address offset: 0x24 */
+  uint32_t      RESERVED1[2];  /*!< Reserved, 0x28-0x2C                                                               */
+  __IO uint32_t AHB1ENR;       /*!< RCC AHB1 peripheral clock register,                          Address offset: 0x30 */
+  __IO uint32_t AHB2ENR;       /*!< RCC AHB2 peripheral clock register,                          Address offset: 0x34 */
+  __IO uint32_t AHB3ENR;       /*!< RCC AHB3 peripheral clock register,                          Address offset: 0x38 */
+  uint32_t      RESERVED2;     /*!< Reserved, 0x3C                                                                    */
+  __IO uint32_t APB1ENR;       /*!< RCC APB1 peripheral clock enable register,                   Address offset: 0x40 */
+  __IO uint32_t APB2ENR;       /*!< RCC APB2 peripheral clock enable register,                   Address offset: 0x44 */
+  uint32_t      RESERVED3[2];  /*!< Reserved, 0x48-0x4C                                                               */
+  __IO uint32_t AHB1LPENR;     /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+  __IO uint32_t AHB2LPENR;     /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+  __IO uint32_t AHB3LPENR;     /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+  uint32_t      RESERVED4;     /*!< Reserved, 0x5C                                                                    */
+  __IO uint32_t APB1LPENR;     /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+  __IO uint32_t APB2LPENR;     /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+  uint32_t      RESERVED5[2];  /*!< Reserved, 0x68-0x6C                                                               */
+  __IO uint32_t BDCR;          /*!< RCC Backup domain control register,                          Address offset: 0x70 */
+  __IO uint32_t CSR;           /*!< RCC clock control & status register,                         Address offset: 0x74 */
+  uint32_t      RESERVED6[2];  /*!< Reserved, 0x78-0x7C                                                               */
+  __IO uint32_t SSCGR;         /*!< RCC spread spectrum clock generation register,               Address offset: 0x80 */
+  __IO uint32_t PLLI2SCFGR;    /*!< RCC PLLI2S configuration register,                           Address offset: 0x84 */
+  __IO uint32_t PLLSAICFGR;    /*!< RCC PLLSAI configuration register,                           Address offset: 0x88 */
+  __IO uint32_t DCKCFGR1;      /*!< RCC Dedicated Clocks configuration register1,                 Address offset: 0x8C */
+  __IO uint32_t DCKCFGR2;      /*!< RCC Dedicated Clocks configuration register 2,               Address offset: 0x90 */
+
+} RCC_TypeDef;
+
+/** 
+  * @brief Real-Time Clock
+  */
+
+typedef struct
+{
+  __IO uint32_t TR;         /*!< RTC time register,                                         Address offset: 0x00 */
+  __IO uint32_t DR;         /*!< RTC date register,                                         Address offset: 0x04 */
+  __IO uint32_t CR;         /*!< RTC control register,                                      Address offset: 0x08 */                                                                                            
+  __IO uint32_t ISR;        /*!< RTC initialization and status register,                    Address offset: 0x0C */
+  __IO uint32_t PRER;       /*!< RTC prescaler register,                                    Address offset: 0x10 */
+  __IO uint32_t WUTR;       /*!< RTC wakeup timer register,                                 Address offset: 0x14 */
+       uint32_t reserved;   /*!< Reserved  */
+  __IO uint32_t ALRMAR;     /*!< RTC alarm A register,                                      Address offset: 0x1C */
+  __IO uint32_t ALRMBR;     /*!< RTC alarm B register,                                      Address offset: 0x20 */
+  __IO uint32_t WPR;        /*!< RTC write protection register,                             Address offset: 0x24 */
+  __IO uint32_t SSR;        /*!< RTC sub second register,                                   Address offset: 0x28 */
+  __IO uint32_t SHIFTR;     /*!< RTC shift control register,                                Address offset: 0x2C */
+  __IO uint32_t TSTR;       /*!< RTC time stamp time register,                              Address offset: 0x30 */
+  __IO uint32_t TSDR;       /*!< RTC time stamp date register,                              Address offset: 0x34 */
+  __IO uint32_t TSSSR;      /*!< RTC time-stamp sub second register,                        Address offset: 0x38 */
+  __IO uint32_t CALR;       /*!< RTC calibration register,                                  Address offset: 0x3C */
+  __IO uint32_t TAMPCR;     /*!< RTC tamper configuration register,                         Address offset: 0x40 */
+  __IO uint32_t ALRMASSR;   /*!< RTC alarm A sub second register,                           Address offset: 0x44 */
+  __IO uint32_t ALRMBSSR;   /*!< RTC alarm B sub second register,                           Address offset: 0x48 */
+  __IO uint32_t OR;         /*!< RTC option register,                                       Address offset: 0x4C */
+  __IO uint32_t BKP0R;      /*!< RTC backup register 0,                                     Address offset: 0x50 */
+  __IO uint32_t BKP1R;      /*!< RTC backup register 1,                                     Address offset: 0x54 */
+  __IO uint32_t BKP2R;      /*!< RTC backup register 2,                                     Address offset: 0x58 */
+  __IO uint32_t BKP3R;      /*!< RTC backup register 3,                                     Address offset: 0x5C */
+  __IO uint32_t BKP4R;      /*!< RTC backup register 4,                                     Address offset: 0x60 */
+  __IO uint32_t BKP5R;      /*!< RTC backup register 5,                                     Address offset: 0x64 */
+  __IO uint32_t BKP6R;      /*!< RTC backup register 6,                                     Address offset: 0x68 */
+  __IO uint32_t BKP7R;      /*!< RTC backup register 7,                                     Address offset: 0x6C */
+  __IO uint32_t BKP8R;      /*!< RTC backup register 8,                                     Address offset: 0x70 */
+  __IO uint32_t BKP9R;      /*!< RTC backup register 9,                                     Address offset: 0x74 */
+  __IO uint32_t BKP10R;     /*!< RTC backup register 10,                                    Address offset: 0x78 */
+  __IO uint32_t BKP11R;     /*!< RTC backup register 11,                                    Address offset: 0x7C */
+  __IO uint32_t BKP12R;     /*!< RTC backup register 12,                                    Address offset: 0x80 */
+  __IO uint32_t BKP13R;     /*!< RTC backup register 13,                                    Address offset: 0x84 */
+  __IO uint32_t BKP14R;     /*!< RTC backup register 14,                                    Address offset: 0x88 */
+  __IO uint32_t BKP15R;     /*!< RTC backup register 15,                                    Address offset: 0x8C */
+  __IO uint32_t BKP16R;     /*!< RTC backup register 16,                                    Address offset: 0x90 */
+  __IO uint32_t BKP17R;     /*!< RTC backup register 17,                                    Address offset: 0x94 */
+  __IO uint32_t BKP18R;     /*!< RTC backup register 18,                                    Address offset: 0x98 */
+  __IO uint32_t BKP19R;     /*!< RTC backup register 19,                                    Address offset: 0x9C */
+  __IO uint32_t BKP20R;     /*!< RTC backup register 20,                                    Address offset: 0xA0 */
+  __IO uint32_t BKP21R;     /*!< RTC backup register 21,                                    Address offset: 0xA4 */
+  __IO uint32_t BKP22R;     /*!< RTC backup register 22,                                    Address offset: 0xA8 */
+  __IO uint32_t BKP23R;     /*!< RTC backup register 23,                                    Address offset: 0xAC */
+  __IO uint32_t BKP24R;     /*!< RTC backup register 24,                                    Address offset: 0xB0 */
+  __IO uint32_t BKP25R;     /*!< RTC backup register 25,                                    Address offset: 0xB4 */
+  __IO uint32_t BKP26R;     /*!< RTC backup register 26,                                    Address offset: 0xB8 */
+  __IO uint32_t BKP27R;     /*!< RTC backup register 27,                                    Address offset: 0xBC */
+  __IO uint32_t BKP28R;     /*!< RTC backup register 28,                                    Address offset: 0xC0 */
+  __IO uint32_t BKP29R;     /*!< RTC backup register 29,                                    Address offset: 0xC4 */
+  __IO uint32_t BKP30R;     /*!< RTC backup register 30,                                    Address offset: 0xC8 */
+  __IO uint32_t BKP31R;     /*!< RTC backup register 31,                                    Address offset: 0xCC */
+} RTC_TypeDef;
+
+
+/** 
+  * @brief Serial Audio Interface
+  */
+  
+typedef struct
+{
+  __IO uint32_t GCR;      /*!< SAI global configuration register,        Address offset: 0x00 */
+} SAI_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t CR1;      /*!< SAI block x configuration register 1,     Address offset: 0x04 */
+  __IO uint32_t CR2;      /*!< SAI block x configuration register 2,     Address offset: 0x08 */
+  __IO uint32_t FRCR;     /*!< SAI block x frame configuration register, Address offset: 0x0C */
+  __IO uint32_t SLOTR;    /*!< SAI block x slot register,                Address offset: 0x10 */
+  __IO uint32_t IMR;      /*!< SAI block x interrupt mask register,      Address offset: 0x14 */
+  __IO uint32_t SR;       /*!< SAI block x status register,              Address offset: 0x18 */
+  __IO uint32_t CLRFR;    /*!< SAI block x clear flag register,          Address offset: 0x1C */
+  __IO uint32_t DR;       /*!< SAI block x data register,                Address offset: 0x20 */
+} SAI_Block_TypeDef;
+
+/** 
+  * @brief SPDIF-RX Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t   CR;           /*!< Control register,                   Address offset: 0x00 */
+  __IO uint32_t   IMR;          /*!< Interrupt mask register,            Address offset: 0x04 */  
+  __IO uint32_t   SR;           /*!< Status register,                    Address offset: 0x08 */
+  __IO uint32_t   IFCR;         /*!< Interrupt Flag Clear register,      Address offset: 0x0C */ 
+  __IO uint32_t   DR;           /*!< Data input register,                Address offset: 0x10 */
+  __IO uint32_t   CSR;          /*!< Channel Status register,            Address offset: 0x14 */
+  __IO uint32_t   DIR;          /*!< Debug Information register,         Address offset: 0x18 */
+} SPDIFRX_TypeDef;
+
+
+/** 
+  * @brief SD host Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t POWER;          /*!< SDMMC power control register,    Address offset: 0x00 */
+  __IO uint32_t CLKCR;          /*!< SDMMClock control register,     Address offset: 0x04 */
+  __IO uint32_t ARG;            /*!< SDMMC argument register,         Address offset: 0x08 */
+  __IO uint32_t CMD;            /*!< SDMMC command register,          Address offset: 0x0C */
+  __I uint32_t  RESPCMD;        /*!< SDMMC command response register, Address offset: 0x10 */
+  __I uint32_t  RESP1;          /*!< SDMMC response 1 register,       Address offset: 0x14 */
+  __I uint32_t  RESP2;          /*!< SDMMC response 2 register,       Address offset: 0x18 */
+  __I uint32_t  RESP3;          /*!< SDMMC response 3 register,       Address offset: 0x1C */
+  __I uint32_t  RESP4;          /*!< SDMMC response 4 register,       Address offset: 0x20 */
+  __IO uint32_t DTIMER;         /*!< SDMMC data timer register,       Address offset: 0x24 */
+  __IO uint32_t DLEN;           /*!< SDMMC data length register,      Address offset: 0x28 */
+  __IO uint32_t DCTRL;          /*!< SDMMC data control register,     Address offset: 0x2C */
+  __I uint32_t  DCOUNT;         /*!< SDMMC data counter register,     Address offset: 0x30 */
+  __I uint32_t  STA;            /*!< SDMMC status register,           Address offset: 0x34 */
+  __IO uint32_t ICR;            /*!< SDMMC interrupt clear register,  Address offset: 0x38 */
+  __IO uint32_t MASK;           /*!< SDMMC mask register,             Address offset: 0x3C */
+  uint32_t      RESERVED0[2];   /*!< Reserved, 0x40-0x44                                  */
+  __I uint32_t  FIFOCNT;        /*!< SDMMC FIFO counter register,     Address offset: 0x48 */
+  uint32_t      RESERVED1[13];  /*!< Reserved, 0x4C-0x7C                                  */
+  __IO uint32_t FIFO;           /*!< SDMMC data FIFO register,        Address offset: 0x80 */
+} SDMMC_TypeDef;
+
+/** 
+  * @brief Serial Peripheral Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t CR1;        /*!< SPI control register 1 (not used in I2S mode),      Address offset: 0x00 */
+  __IO uint32_t CR2;        /*!< SPI control register 2,                             Address offset: 0x04 */
+  __IO uint32_t SR;         /*!< SPI status register,                                Address offset: 0x08 */
+  __IO uint32_t DR;         /*!< SPI data register,                                  Address offset: 0x0C */
+  __IO uint32_t CRCPR;      /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+  __IO uint32_t RXCRCR;     /*!< SPI RX CRC register (not used in I2S mode),         Address offset: 0x14 */
+  __IO uint32_t TXCRCR;     /*!< SPI TX CRC register (not used in I2S mode),         Address offset: 0x18 */
+  __IO uint32_t I2SCFGR;    /*!< SPI_I2S configuration register,                     Address offset: 0x1C */
+  __IO uint32_t I2SPR;      /*!< SPI_I2S prescaler register,                         Address offset: 0x20 */
+} SPI_TypeDef;
+
+/** 
+  * @brief QUAD Serial Peripheral Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;       /*!< QUADSPI Control register,                           Address offset: 0x00 */
+  __IO uint32_t DCR;      /*!< QUADSPI Device Configuration register,              Address offset: 0x04 */
+  __IO uint32_t SR;       /*!< QUADSPI Status register,                            Address offset: 0x08 */
+  __IO uint32_t FCR;      /*!< QUADSPI Flag Clear register,                        Address offset: 0x0C */
+  __IO uint32_t DLR;      /*!< QUADSPI Data Length register,                       Address offset: 0x10 */
+  __IO uint32_t CCR;      /*!< QUADSPI Communication Configuration register,       Address offset: 0x14 */
+  __IO uint32_t AR;       /*!< QUADSPI Address register,                           Address offset: 0x18 */
+  __IO uint32_t ABR;      /*!< QUADSPI Alternate Bytes register,                   Address offset: 0x1C */
+  __IO uint32_t DR;       /*!< QUADSPI Data register,                              Address offset: 0x20 */
+  __IO uint32_t PSMKR;    /*!< QUADSPI Polling Status Mask register,               Address offset: 0x24 */
+  __IO uint32_t PSMAR;    /*!< QUADSPI Polling Status Match register,              Address offset: 0x28 */                  
+  __IO uint32_t PIR;      /*!< QUADSPI Polling Interval register,                  Address offset: 0x2C */
+  __IO uint32_t LPTR;     /*!< QUADSPI Low Power Timeout register,                 Address offset: 0x30 */    
+} QUADSPI_TypeDef;
+
+/** 
+  * @brief TIM
+  */
+
+typedef struct
+{
+  __IO uint32_t CR1;         /*!< TIM control register 1,              Address offset: 0x00 */
+  __IO uint32_t CR2;         /*!< TIM control register 2,              Address offset: 0x04 */
+  __IO uint32_t SMCR;        /*!< TIM slave mode control register,     Address offset: 0x08 */
+  __IO uint32_t DIER;        /*!< TIM DMA/interrupt enable register,   Address offset: 0x0C */
+  __IO uint32_t SR;          /*!< TIM status register,                 Address offset: 0x10 */
+  __IO uint32_t EGR;         /*!< TIM event generation register,       Address offset: 0x14 */
+  __IO uint32_t CCMR1;       /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+  __IO uint32_t CCMR2;       /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+  __IO uint32_t CCER;        /*!< TIM capture/compare enable register, Address offset: 0x20 */
+  __IO uint32_t CNT;         /*!< TIM counter register,                Address offset: 0x24 */
+  __IO uint32_t PSC;         /*!< TIM prescaler,                       Address offset: 0x28 */
+  __IO uint32_t ARR;         /*!< TIM auto-reload register,            Address offset: 0x2C */
+  __IO uint32_t RCR;         /*!< TIM repetition counter register,     Address offset: 0x30 */
+  __IO uint32_t CCR1;        /*!< TIM capture/compare register 1,      Address offset: 0x34 */
+  __IO uint32_t CCR2;        /*!< TIM capture/compare register 2,      Address offset: 0x38 */
+  __IO uint32_t CCR3;        /*!< TIM capture/compare register 3,      Address offset: 0x3C */
+  __IO uint32_t CCR4;        /*!< TIM capture/compare register 4,      Address offset: 0x40 */
+  __IO uint32_t BDTR;        /*!< TIM break and dead-time register,    Address offset: 0x44 */
+  __IO uint32_t DCR;         /*!< TIM DMA control register,            Address offset: 0x48 */
+  __IO uint32_t DMAR;        /*!< TIM DMA address for full transfer,   Address offset: 0x4C */
+  __IO uint32_t OR;          /*!< TIM option register,                 Address offset: 0x50 */
+  __IO uint32_t CCMR3;       /*!< TIM capture/compare mode register 3,      Address offset: 0x54 */
+  __IO uint32_t CCR5;        /*!< TIM capture/compare mode register5,       Address offset: 0x58 */
+  __IO uint32_t CCR6;        /*!< TIM capture/compare mode register6,       Address offset: 0x5C */
+
+} TIM_TypeDef;
+
+/** 
+  * @brief LPTIMIMER
+  */
+typedef struct
+{
+  __IO uint32_t ISR;      /*!< LPTIM Interrupt and Status register,                Address offset: 0x00 */
+  __IO uint32_t ICR;      /*!< LPTIM Interrupt Clear register,                     Address offset: 0x04 */
+  __IO uint32_t IER;      /*!< LPTIM Interrupt Enable register,                    Address offset: 0x08 */
+  __IO uint32_t CFGR;     /*!< LPTIM Configuration register,                       Address offset: 0x0C */
+  __IO uint32_t CR;       /*!< LPTIM Control register,                             Address offset: 0x10 */
+  __IO uint32_t CMP;      /*!< LPTIM Compare register,                             Address offset: 0x14 */
+  __IO uint32_t ARR;      /*!< LPTIM Autoreload register,                          Address offset: 0x18 */
+  __IO uint32_t CNT;      /*!< LPTIM Counter register,                             Address offset: 0x1C */
+} LPTIM_TypeDef;
+
+
+/** 
+  * @brief Universal Synchronous Asynchronous Receiver Transmitter
+  */
+ 
+typedef struct
+{
+  __IO uint32_t CR1;    /*!< USART Control register 1,                 Address offset: 0x00 */ 
+  __IO uint32_t CR2;    /*!< USART Control register 2,                 Address offset: 0x04 */ 
+  __IO uint32_t CR3;    /*!< USART Control register 3,                 Address offset: 0x08 */
+  __IO uint32_t BRR;    /*!< USART Baud rate register,                 Address offset: 0x0C */                                               
+  __IO uint32_t GTPR;   /*!< USART Guard time and prescaler register,  Address offset: 0x10 */
+  __IO uint32_t RTOR;   /*!< USART Receiver Time Out register,         Address offset: 0x14 */  
+  __IO uint32_t RQR;    /*!< USART Request register,                   Address offset: 0x18 */
+  __IO uint32_t ISR;    /*!< USART Interrupt and status register,      Address offset: 0x1C */
+  __IO uint32_t ICR;    /*!< USART Interrupt flag Clear register,      Address offset: 0x20 */
+  __IO uint32_t RDR;    /*!< USART Receive Data register,              Address offset: 0x24 */
+  __IO uint32_t TDR;    /*!< USART Transmit Data register,             Address offset: 0x28 */
+} USART_TypeDef;
+
+
+/** 
+  * @brief Window WATCHDOG
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;   /*!< WWDG Control register,       Address offset: 0x00 */
+  __IO uint32_t CFR;  /*!< WWDG Configuration register, Address offset: 0x04 */
+  __IO uint32_t SR;   /*!< WWDG Status register,        Address offset: 0x08 */
+} WWDG_TypeDef;
+
+
+/** 
+  * @brief RNG
+  */
+  
+typedef struct 
+{
+  __IO uint32_t CR;  /*!< RNG control register, Address offset: 0x00 */
+  __IO uint32_t SR;  /*!< RNG status register,  Address offset: 0x04 */
+  __IO uint32_t DR;  /*!< RNG data register,    Address offset: 0x08 */
+} RNG_TypeDef;
+
+/**
+  * @}
+  */
+
+/** 
+  * @brief USB_OTG_Core_Registers
+  */
+typedef struct
+{
+ __IO uint32_t GOTGCTL;               /*!< USB_OTG Control and Status Register          000h */
+  __IO uint32_t GOTGINT;              /*!< USB_OTG Interrupt Register                   004h */
+  __IO uint32_t GAHBCFG;              /*!< Core AHB Configuration Register              008h */
+  __IO uint32_t GUSBCFG;              /*!< Core USB Configuration Register              00Ch */
+  __IO uint32_t GRSTCTL;              /*!< Core Reset Register                          010h */
+  __IO uint32_t GINTSTS;              /*!< Core Interrupt Register                      014h */
+  __IO uint32_t GINTMSK;              /*!< Core Interrupt Mask Register                 018h */
+  __IO uint32_t GRXSTSR;              /*!< Receive Sts Q Read Register                  01Ch */
+  __IO uint32_t GRXSTSP;              /*!< Receive Sts Q Read & POP Register            020h */
+  __IO uint32_t GRXFSIZ;              /*!< Receive FIFO Size Register                   024h */
+  __IO uint32_t DIEPTXF0_HNPTXFSIZ;   /*!< EP0 / Non Periodic Tx FIFO Size Register     028h */
+  __IO uint32_t HNPTXSTS;             /*!< Non Periodic Tx FIFO/Queue Sts reg           02Ch */
+  uint32_t Reserved30[2];             /*!< Reserved                                     030h */
+  __IO uint32_t GCCFG;                /*!< General Purpose IO Register                  038h */
+  __IO uint32_t CID;                  /*!< User ID Register                             03Ch */
+  uint32_t  Reserved5[3];             /*!< Reserved                                040h-048h */
+  __IO uint32_t GHWCFG3;              /*!< User HW config3                              04Ch */
+  uint32_t  Reserved6;                /*!< Reserved                                     050h */ 
+  __IO uint32_t GLPMCFG;              /*!< LPM Register                                 054h */
+  __IO uint32_t GPWRDN;               /*!< Power Down Register                          058h */
+  __IO uint32_t GDFIFOCFG;            /*!< DFIFO Software Config Register               05Ch */
+   __IO uint32_t GADPCTL;             /*!< ADP Timer, Control and Status Register       60Ch */
+    uint32_t  Reserved43[39];         /*!< Reserved                                058h-0FFh */
+  __IO uint32_t HPTXFSIZ;             /*!< Host Periodic Tx FIFO Size Reg               100h */
+  __IO uint32_t DIEPTXF[0x0F];        /*!< dev Periodic Transmit FIFO */
+} USB_OTG_GlobalTypeDef;
+
+
+/** 
+  * @brief USB_OTG_device_Registers
+  */
+typedef struct 
+{
+  __IO uint32_t DCFG;            /*!< dev Configuration Register   800h */
+  __IO uint32_t DCTL;            /*!< dev Control Register         804h */
+  __IO uint32_t DSTS;            /*!< dev Status Register (RO)     808h */
+  uint32_t Reserved0C;           /*!< Reserved                     80Ch */
+  __IO uint32_t DIEPMSK;         /*!< dev IN Endpoint Mask         810h */
+  __IO uint32_t DOEPMSK;         /*!< dev OUT Endpoint Mask        814h */
+  __IO uint32_t DAINT;           /*!< dev All Endpoints Itr Reg    818h */
+  __IO uint32_t DAINTMSK;        /*!< dev All Endpoints Itr Mask   81Ch */
+  uint32_t  Reserved20;          /*!< Reserved                     820h */
+  uint32_t Reserved9;            /*!< Reserved                     824h */
+  __IO uint32_t DVBUSDIS;        /*!< dev VBUS discharge Register  828h */
+  __IO uint32_t DVBUSPULSE;      /*!< dev VBUS Pulse Register      82Ch */
+  __IO uint32_t DTHRCTL;         /*!< dev threshold                830h */
+  __IO uint32_t DIEPEMPMSK;      /*!< dev empty msk                834h */
+  __IO uint32_t DEACHINT;        /*!< dedicated EP interrupt       838h */
+  __IO uint32_t DEACHMSK;        /*!< dedicated EP msk             83Ch */  
+  uint32_t Reserved40;           /*!< dedicated EP mask            840h */
+  __IO uint32_t DINEP1MSK;       /*!< dedicated EP mask            844h */
+  uint32_t  Reserved44[15];      /*!< Reserved                 844-87Ch */
+  __IO uint32_t DOUTEP1MSK;      /*!< dedicated EP msk             884h */   
+} USB_OTG_DeviceTypeDef;
+
+
+/** 
+  * @brief USB_OTG_IN_Endpoint-Specific_Register
+  */
+typedef struct 
+{
+  __IO uint32_t DIEPCTL;           /*!< dev IN Endpoint Control Reg    900h + (ep_num * 20h) + 00h */
+  uint32_t Reserved04;             /*!< Reserved                       900h + (ep_num * 20h) + 04h */
+  __IO uint32_t DIEPINT;           /*!< dev IN Endpoint Itr Reg        900h + (ep_num * 20h) + 08h */
+  uint32_t Reserved0C;             /*!< Reserved                       900h + (ep_num * 20h) + 0Ch */
+  __IO uint32_t DIEPTSIZ;          /*!< IN Endpoint Txfer Size         900h + (ep_num * 20h) + 10h */
+  __IO uint32_t DIEPDMA;           /*!< IN Endpoint DMA Address Reg    900h + (ep_num * 20h) + 14h */
+  __IO uint32_t DTXFSTS;           /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+  uint32_t Reserved18;             /*!< Reserved  900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+} USB_OTG_INEndpointTypeDef;
+
+
+/** 
+  * @brief USB_OTG_OUT_Endpoint-Specific_Registers
+  */
+typedef struct 
+{
+  __IO uint32_t DOEPCTL;       /*!< dev OUT Endpoint Control Reg           B00h + (ep_num * 20h) + 00h */
+  uint32_t Reserved04;         /*!< Reserved                               B00h + (ep_num * 20h) + 04h */
+  __IO uint32_t DOEPINT;       /*!< dev OUT Endpoint Itr Reg               B00h + (ep_num * 20h) + 08h */
+  uint32_t Reserved0C;         /*!< Reserved                               B00h + (ep_num * 20h) + 0Ch */
+  __IO uint32_t DOEPTSIZ;      /*!< dev OUT Endpoint Txfer Size            B00h + (ep_num * 20h) + 10h */
+  __IO uint32_t DOEPDMA;       /*!< dev OUT Endpoint DMA Address           B00h + (ep_num * 20h) + 14h */
+  uint32_t Reserved18[2];      /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */
+} USB_OTG_OUTEndpointTypeDef;
+
+
+/** 
+  * @brief USB_OTG_Host_Mode_Register_Structures
+  */
+typedef struct 
+{
+  __IO uint32_t HCFG;             /*!< Host Configuration Register          400h */
+  __IO uint32_t HFIR;             /*!< Host Frame Interval Register         404h */
+  __IO uint32_t HFNUM;            /*!< Host Frame Nbr/Frame Remaining       408h */
+  uint32_t Reserved40C;           /*!< Reserved                             40Ch */
+  __IO uint32_t HPTXSTS;          /*!< Host Periodic Tx FIFO/ Queue Status  410h */
+  __IO uint32_t HAINT;            /*!< Host All Channels Interrupt Register 414h */
+  __IO uint32_t HAINTMSK;         /*!< Host All Channels Interrupt Mask     418h */
+} USB_OTG_HostTypeDef;
+
+/** 
+  * @brief USB_OTG_Host_Channel_Specific_Registers
+  */
+typedef struct
+{
+  __IO uint32_t HCCHAR;           /*!< Host Channel Characteristics Register    500h */
+  __IO uint32_t HCSPLT;           /*!< Host Channel Split Control Register      504h */
+  __IO uint32_t HCINT;            /*!< Host Channel Interrupt Register          508h */
+  __IO uint32_t HCINTMSK;         /*!< Host Channel Interrupt Mask Register     50Ch */
+  __IO uint32_t HCTSIZ;           /*!< Host Channel Transfer Size Register      510h */
+  __IO uint32_t HCDMA;            /*!< Host Channel DMA Address Register        514h */
+  uint32_t Reserved[2];           /*!< Reserved                                      */
+} USB_OTG_HostChannelTypeDef;
+/**
+  * @}
+  */
+
+
+
+/** @addtogroup Peripheral_memory_map
+  * @{
+  */
+#define RAMITCM_BASE           ((uint32_t)0x00000000) /*!< Base address of :16KB RAM reserved for CPU execution/instruction accessible over ITCM   */
+#define FLASHITCM_BASE         ((uint32_t)0x00200000) /*!< Base address of :(up to 1 MB) embedded FLASH memory  accessible over ITCM               */                       
+#define FLASHAXI_BASE          ((uint32_t)0x08000000) /*!< Base address of : (up to 1 MB) embedded FLASH memory accessible over AXI                */                       
+#define RAMDTCM_BASE           ((uint32_t)0x20000000) /*!< Base address of : 64KB system data RAM accessible over DTCM                             */
+#define PERIPH_BASE            ((uint32_t)0x40000000) /*!< Base address of : AHB/ABP Peripherals                                                   */
+#define BKPSRAM_BASE           ((uint32_t)0x40024000) /*!< Base address of : Backup SRAM(4 KB)                                                     */
+#define QSPI_BASE              ((uint32_t)0x90000000) /*!< Base address of : QSPI memories  accessible over AXI                                    */
+#define FMC_R_BASE             ((uint32_t)0xA0000000) /*!< Base address of : FMC Control registers                                                 */
+#define QSPI_R_BASE            ((uint32_t)0xA0001000) /*!< Base address of : QSPI Control  registers                                               */
+#define SRAM1_BASE             ((uint32_t)0x20010000) /*!< Base address of : 240KB RAM1 accessible over AXI/AHB                                    */
+#define SRAM2_BASE             ((uint32_t)0x2004C000) /*!< Base address of : 16KB RAM2 accessible over AXI/AHB                                     */
+#define FLASH_END              ((uint32_t)0x080FFFFF) /*!< FLASH end address */
+
+/* Legacy define */
+#define FLASH_BASE     FLASHAXI_BASE
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE        PERIPH_BASE
+#define APB2PERIPH_BASE       (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE       (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE       (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE             (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE             (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE             (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE             (APB1PERIPH_BASE + 0x0C00)
+#define TIM6_BASE             (APB1PERIPH_BASE + 0x1000)
+#define TIM7_BASE             (APB1PERIPH_BASE + 0x1400)
+#define TIM12_BASE            (APB1PERIPH_BASE + 0x1800)
+#define TIM13_BASE            (APB1PERIPH_BASE + 0x1C00)
+#define TIM14_BASE            (APB1PERIPH_BASE + 0x2000)
+#define LPTIM1_BASE           (APB1PERIPH_BASE + 0x2400)
+#define RTC_BASE              (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE             (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE             (APB1PERIPH_BASE + 0x3000)
+#define SPI2_BASE             (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE             (APB1PERIPH_BASE + 0x3C00)
+#define SPDIFRX_BASE          (APB1PERIPH_BASE + 0x4000)
+#define USART2_BASE           (APB1PERIPH_BASE + 0x4400)
+#define USART3_BASE           (APB1PERIPH_BASE + 0x4800)
+#define UART4_BASE            (APB1PERIPH_BASE + 0x4C00)
+#define UART5_BASE            (APB1PERIPH_BASE + 0x5000)
+#define I2C1_BASE             (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE             (APB1PERIPH_BASE + 0x5800)
+#define I2C3_BASE             (APB1PERIPH_BASE + 0x5C00)
+#define I2C4_BASE             (APB1PERIPH_BASE + 0x6000)
+#define CAN1_BASE             (APB1PERIPH_BASE + 0x6400)
+#define CAN2_BASE             (APB1PERIPH_BASE + 0x6800)
+#define CEC_BASE              (APB1PERIPH_BASE + 0x6C00)
+#define PWR_BASE              (APB1PERIPH_BASE + 0x7000)
+#define DAC_BASE              (APB1PERIPH_BASE + 0x7400)
+#define UART7_BASE            (APB1PERIPH_BASE + 0x7800)
+#define UART8_BASE            (APB1PERIPH_BASE + 0x7C00)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE             (APB2PERIPH_BASE + 0x0000)
+#define TIM8_BASE             (APB2PERIPH_BASE + 0x0400)
+#define USART1_BASE           (APB2PERIPH_BASE + 0x1000)
+#define USART6_BASE           (APB2PERIPH_BASE + 0x1400)
+#define ADC1_BASE             (APB2PERIPH_BASE + 0x2000)
+#define ADC2_BASE             (APB2PERIPH_BASE + 0x2100)
+#define ADC3_BASE             (APB2PERIPH_BASE + 0x2200)
+#define ADC_BASE              (APB2PERIPH_BASE + 0x2300)
+#define SDMMC1_BASE           (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE             (APB2PERIPH_BASE + 0x3000)
+#define SPI4_BASE             (APB2PERIPH_BASE + 0x3400)
+#define SYSCFG_BASE           (APB2PERIPH_BASE + 0x3800)
+#define EXTI_BASE             (APB2PERIPH_BASE + 0x3C00)
+#define TIM9_BASE             (APB2PERIPH_BASE + 0x4000)
+#define TIM10_BASE            (APB2PERIPH_BASE + 0x4400)
+#define TIM11_BASE            (APB2PERIPH_BASE + 0x4800)
+#define SPI5_BASE             (APB2PERIPH_BASE + 0x5000)
+#define SPI6_BASE             (APB2PERIPH_BASE + 0x5400)
+#define SAI1_BASE             (APB2PERIPH_BASE + 0x5800)
+#define SAI2_BASE             (APB2PERIPH_BASE + 0x5C00)
+#define SAI1_Block_A_BASE     (SAI1_BASE + 0x004)
+#define SAI1_Block_B_BASE     (SAI1_BASE + 0x024)
+#define SAI2_Block_A_BASE     (SAI2_BASE + 0x004)
+#define SAI2_Block_B_BASE     (SAI2_BASE + 0x024)
+#define LTDC_BASE             (APB2PERIPH_BASE + 0x6800)
+#define LTDC_Layer1_BASE      (LTDC_BASE + 0x84)
+#define LTDC_Layer2_BASE      (LTDC_BASE + 0x104)
+/*!< AHB1 peripherals */
+#define GPIOA_BASE            (AHB1PERIPH_BASE + 0x0000)
+#define GPIOB_BASE            (AHB1PERIPH_BASE + 0x0400)
+#define GPIOC_BASE            (AHB1PERIPH_BASE + 0x0800)
+#define GPIOD_BASE            (AHB1PERIPH_BASE + 0x0C00)
+#define GPIOE_BASE            (AHB1PERIPH_BASE + 0x1000)
+#define GPIOF_BASE            (AHB1PERIPH_BASE + 0x1400)
+#define GPIOG_BASE            (AHB1PERIPH_BASE + 0x1800)
+#define GPIOH_BASE            (AHB1PERIPH_BASE + 0x1C00)
+#define GPIOI_BASE            (AHB1PERIPH_BASE + 0x2000)
+#define GPIOJ_BASE            (AHB1PERIPH_BASE + 0x2400)
+#define GPIOK_BASE            (AHB1PERIPH_BASE + 0x2800)
+#define CRC_BASE              (AHB1PERIPH_BASE + 0x3000)
+#define RCC_BASE              (AHB1PERIPH_BASE + 0x3800)
+#define FLASH_R_BASE          (AHB1PERIPH_BASE + 0x3C00)
+#define DMA1_BASE             (AHB1PERIPH_BASE + 0x6000)
+#define DMA1_Stream0_BASE     (DMA1_BASE + 0x010)
+#define DMA1_Stream1_BASE     (DMA1_BASE + 0x028)
+#define DMA1_Stream2_BASE     (DMA1_BASE + 0x040)
+#define DMA1_Stream3_BASE     (DMA1_BASE + 0x058)
+#define DMA1_Stream4_BASE     (DMA1_BASE + 0x070)
+#define DMA1_Stream5_BASE     (DMA1_BASE + 0x088)
+#define DMA1_Stream6_BASE     (DMA1_BASE + 0x0A0)
+#define DMA1_Stream7_BASE     (DMA1_BASE + 0x0B8)
+#define DMA2_BASE             (AHB1PERIPH_BASE + 0x6400)
+#define DMA2_Stream0_BASE     (DMA2_BASE + 0x010)
+#define DMA2_Stream1_BASE     (DMA2_BASE + 0x028)
+#define DMA2_Stream2_BASE     (DMA2_BASE + 0x040)
+#define DMA2_Stream3_BASE     (DMA2_BASE + 0x058)
+#define DMA2_Stream4_BASE     (DMA2_BASE + 0x070)
+#define DMA2_Stream5_BASE     (DMA2_BASE + 0x088)
+#define DMA2_Stream6_BASE     (DMA2_BASE + 0x0A0)
+#define DMA2_Stream7_BASE     (DMA2_BASE + 0x0B8)
+#define ETH_BASE              (AHB1PERIPH_BASE + 0x8000)
+#define ETH_MAC_BASE          (ETH_BASE)
+#define ETH_MMC_BASE          (ETH_BASE + 0x0100)
+#define ETH_PTP_BASE          (ETH_BASE + 0x0700)
+#define ETH_DMA_BASE          (ETH_BASE + 0x1000)
+#define DMA2D_BASE            (AHB1PERIPH_BASE + 0xB000)
+/*!< AHB2 peripherals */
+#define DCMI_BASE             (AHB2PERIPH_BASE + 0x50000)
+#define RNG_BASE              (AHB2PERIPH_BASE + 0x60800)
+/*!< FMC Bankx registers base address */
+#define FMC_Bank1_R_BASE      (FMC_R_BASE + 0x0000)
+#define FMC_Bank1E_R_BASE     (FMC_R_BASE + 0x0104)
+#define FMC_Bank3_R_BASE      (FMC_R_BASE + 0x0080)
+#define FMC_Bank5_6_R_BASE    (FMC_R_BASE + 0x0140)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE           ((uint32_t )0xE0042000)
+
+/*!< USB registers base address */
+#define USB_OTG_HS_PERIPH_BASE               ((uint32_t )0x40040000)
+#define USB_OTG_FS_PERIPH_BASE               ((uint32_t )0x50000000)
+
+#define USB_OTG_GLOBAL_BASE                  ((uint32_t )0x000)
+#define USB_OTG_DEVICE_BASE                  ((uint32_t )0x800)
+#define USB_OTG_IN_ENDPOINT_BASE             ((uint32_t )0x900)
+#define USB_OTG_OUT_ENDPOINT_BASE            ((uint32_t )0xB00)
+#define USB_OTG_EP_REG_SIZE                  ((uint32_t )0x20)
+#define USB_OTG_HOST_BASE                    ((uint32_t )0x400)
+#define USB_OTG_HOST_PORT_BASE               ((uint32_t )0x440)
+#define USB_OTG_HOST_CHANNEL_BASE            ((uint32_t )0x500)
+#define USB_OTG_HOST_CHANNEL_SIZE            ((uint32_t )0x20)
+#define USB_OTG_PCGCCTL_BASE                 ((uint32_t )0xE00)
+#define USB_OTG_FIFO_BASE                    ((uint32_t )0x1000)
+#define USB_OTG_FIFO_SIZE                    ((uint32_t )0x1000)
+
+/**
+  * @}
+  */
+  
+/** @addtogroup Peripheral_declaration
+  * @{
+  */  
+#define TIM2                ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3                ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4                ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5                ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6                ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7                ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12               ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13               ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14               ((TIM_TypeDef *) TIM14_BASE)
+#define LPTIM1              ((LPTIM_TypeDef *) LPTIM1_BASE)
+#define RTC                 ((RTC_TypeDef *) RTC_BASE)
+#define WWDG                ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG                ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2                ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3                ((SPI_TypeDef *) SPI3_BASE)
+#define SPDIFRX             ((SPDIFRX_TypeDef *) SPDIFRX_BASE) 
+#define USART2              ((USART_TypeDef *) USART2_BASE)
+#define USART3              ((USART_TypeDef *) USART3_BASE)
+#define UART4               ((USART_TypeDef *) UART4_BASE)
+#define UART5               ((USART_TypeDef *) UART5_BASE)
+#define I2C1                ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2                ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3                ((I2C_TypeDef *) I2C3_BASE)
+#define I2C4                ((I2C_TypeDef *) I2C4_BASE)
+#define CAN1                ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2                ((CAN_TypeDef *) CAN2_BASE)
+#define CEC                 ((CEC_TypeDef *) CEC_BASE)
+#define PWR                 ((PWR_TypeDef *) PWR_BASE)
+#define DAC                 ((DAC_TypeDef *) DAC_BASE)
+#define UART7               ((USART_TypeDef *) UART7_BASE)
+#define UART8               ((USART_TypeDef *) UART8_BASE)
+#define TIM1                ((TIM_TypeDef *) TIM1_BASE)
+#define TIM8                ((TIM_TypeDef *) TIM8_BASE)
+#define USART1              ((USART_TypeDef *) USART1_BASE)
+#define USART6              ((USART_TypeDef *) USART6_BASE)
+#define ADC                 ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1                ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2                ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3                ((ADC_TypeDef *) ADC3_BASE)
+#define SDMMC1              ((SDMMC_TypeDef *) SDMMC1_BASE)
+#define SPI1                ((SPI_TypeDef *) SPI1_BASE) 
+#define SPI4                ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG              ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI                ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9                ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10               ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11               ((TIM_TypeDef *) TIM11_BASE)
+#define SPI5                ((SPI_TypeDef *) SPI5_BASE)
+#define SPI6                ((SPI_TypeDef *) SPI6_BASE)
+#define SAI1                ((SAI_TypeDef *) SAI1_BASE)
+#define SAI2                ((SAI_TypeDef *) SAI2_BASE)
+#define SAI1_Block_A        ((SAI_Block_TypeDef *)SAI1_Block_A_BASE)
+#define SAI1_Block_B        ((SAI_Block_TypeDef *)SAI1_Block_B_BASE)
+#define SAI2_Block_A        ((SAI_Block_TypeDef *)SAI2_Block_A_BASE)
+#define SAI2_Block_B        ((SAI_Block_TypeDef *)SAI2_Block_B_BASE)
+#define LTDC                ((LTDC_TypeDef *)LTDC_BASE)
+#define LTDC_Layer1         ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE)
+#define LTDC_Layer2         ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE)
+#define GPIOA               ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB               ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC               ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD               ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE               ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF               ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG               ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH               ((GPIO_TypeDef *) GPIOH_BASE)
+#define GPIOI               ((GPIO_TypeDef *) GPIOI_BASE)
+#define GPIOJ               ((GPIO_TypeDef *) GPIOJ_BASE)
+#define GPIOK               ((GPIO_TypeDef *) GPIOK_BASE)
+#define CRC                 ((CRC_TypeDef *) CRC_BASE)
+#define RCC                 ((RCC_TypeDef *) RCC_BASE)
+#define FLASH               ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1                ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0        ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1        ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2        ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3        ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4        ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5        ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6        ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7        ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2                ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0        ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1        ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2        ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3        ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4        ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5        ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6        ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7        ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+#define ETH                 ((ETH_TypeDef *) ETH_BASE)  
+#define DMA2D               ((DMA2D_TypeDef *)DMA2D_BASE)
+#define DCMI                ((DCMI_TypeDef *) DCMI_BASE)
+#define RNG                 ((RNG_TypeDef *) RNG_BASE)
+#define FMC_Bank1           ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE)
+#define FMC_Bank1E          ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE)
+#define FMC_Bank3           ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE)
+#define FMC_Bank5_6         ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE)
+#define QUADSPI             ((QUADSPI_TypeDef *) QSPI_R_BASE)
+#define DBGMCU              ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define USB_OTG_FS          ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+#define USB_OTG_HS          ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE)
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_constants
+  * @{
+  */
+  
+  /** @addtogroup Peripheral_Registers_Bits_Definition
+  * @{
+  */
+    
+/******************************************************************************/
+/*                         Peripheral Registers_Bits_Definition               */
+/******************************************************************************/
+
+/******************************************************************************/
+/*                                                                            */
+/*                        Analog to Digital Converter                         */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for ADC_SR register  ********************/
+#define  ADC_SR_AWD                          ((uint32_t)0x00000001)        /*!<Analog watchdog flag                                 */
+#define  ADC_SR_EOC                          ((uint32_t)0x00000002)        /*!<End of conversion                                    */
+#define  ADC_SR_JEOC                         ((uint32_t)0x00000004)        /*!<Injected channel end of conversion                   */
+#define  ADC_SR_JSTRT                        ((uint32_t)0x00000008)        /*!<Injected channel Start flag                          */
+#define  ADC_SR_STRT                         ((uint32_t)0x00000010)        /*!<Regular channel Start flag                           */
+#define  ADC_SR_OVR                          ((uint32_t)0x00000020)        /*!<Overrun flag                                         */
+
+/*******************  Bit definition for ADC_CR1 register  ********************/
+#define  ADC_CR1_AWDCH                       ((uint32_t)0x0000001F)        /*!<AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define  ADC_CR1_AWDCH_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_CR1_AWDCH_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_CR1_AWDCH_2                     ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_CR1_AWDCH_3                     ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_CR1_AWDCH_4                     ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_CR1_EOCIE                       ((uint32_t)0x00000020)        /*!<Interrupt enable for EOC                             */
+#define  ADC_CR1_AWDIE                       ((uint32_t)0x00000040)        /*!<AAnalog Watchdog interrupt enable                    */
+#define  ADC_CR1_JEOCIE                      ((uint32_t)0x00000080)        /*!<Interrupt enable for injected channels               */
+#define  ADC_CR1_SCAN                        ((uint32_t)0x00000100)        /*!<Scan mode */
+#define  ADC_CR1_AWDSGL                      ((uint32_t)0x00000200)        /*!<Enable the watchdog on a single channel in scan mode */
+#define  ADC_CR1_JAUTO                       ((uint32_t)0x00000400)        /*!<Automatic injected group conversion                  */
+#define  ADC_CR1_DISCEN                      ((uint32_t)0x00000800)        /*!<Discontinuous mode on regular channels               */
+#define  ADC_CR1_JDISCEN                     ((uint32_t)0x00001000)        /*!<Discontinuous mode on injected channels              */
+#define  ADC_CR1_DISCNUM                     ((uint32_t)0x0000E000)        /*!<DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define  ADC_CR1_DISCNUM_0                   ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  ADC_CR1_DISCNUM_1                   ((uint32_t)0x00004000)        /*!<Bit 1 */
+#define  ADC_CR1_DISCNUM_2                   ((uint32_t)0x00008000)        /*!<Bit 2 */
+#define  ADC_CR1_JAWDEN                      ((uint32_t)0x00400000)        /*!<Analog watchdog enable on injected channels          */
+#define  ADC_CR1_AWDEN                       ((uint32_t)0x00800000)        /*!<Analog watchdog enable on regular channels           */
+#define  ADC_CR1_RES                         ((uint32_t)0x03000000)        /*!<RES[2:0] bits (Resolution)                           */
+#define  ADC_CR1_RES_0                       ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  ADC_CR1_RES_1                       ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  ADC_CR1_OVRIE                       ((uint32_t)0x04000000)         /*!<overrun interrupt enable */
+  
+/*******************  Bit definition for ADC_CR2 register  ********************/
+#define  ADC_CR2_ADON                        ((uint32_t)0x00000001)        /*!<A/D Converter ON / OFF                                       */
+#define  ADC_CR2_CONT                        ((uint32_t)0x00000002)        /*!<Continuous Conversion                                        */
+#define  ADC_CR2_DMA                         ((uint32_t)0x00000100)        /*!<Direct Memory access mode                                    */
+#define  ADC_CR2_DDS                         ((uint32_t)0x00000200)        /*!<DMA disable selection (Single ADC)                           */
+#define  ADC_CR2_EOCS                        ((uint32_t)0x00000400)        /*!<End of conversion selection                                  */
+#define  ADC_CR2_ALIGN                       ((uint32_t)0x00000800)        /*!<Data Alignment                                               */
+#define  ADC_CR2_JEXTSEL                     ((uint32_t)0x000F0000)        /*!<JEXTSEL[3:0] bits (External event select for injected group) */
+#define  ADC_CR2_JEXTSEL_0                   ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  ADC_CR2_JEXTSEL_1                   ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  ADC_CR2_JEXTSEL_2                   ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  ADC_CR2_JEXTSEL_3                   ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  ADC_CR2_JEXTEN                      ((uint32_t)0x00300000)        /*!<JEXTEN[1:0] bits (External Trigger Conversion mode for injected channelsp) */
+#define  ADC_CR2_JEXTEN_0                    ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_CR2_JEXTEN_1                    ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  ADC_CR2_JSWSTART                    ((uint32_t)0x00400000)        /*!<Start Conversion of injected channels */
+#define  ADC_CR2_EXTSEL                      ((uint32_t)0x0F000000)        /*!<EXTSEL[3:0] bits (External Event Select for regular group) */
+#define  ADC_CR2_EXTSEL_0                    ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  ADC_CR2_EXTSEL_1                    ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  ADC_CR2_EXTSEL_2                    ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  ADC_CR2_EXTSEL_3                    ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  ADC_CR2_EXTEN                       ((uint32_t)0x30000000)        /*!<EXTEN[1:0] bits (External Trigger Conversion mode for regular channelsp) */
+#define  ADC_CR2_EXTEN_0                     ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  ADC_CR2_EXTEN_1                     ((uint32_t)0x20000000)        /*!<Bit 1 */
+#define  ADC_CR2_SWSTART                     ((uint32_t)0x40000000)        /*!<Start Conversion of regular channels */
+
+/******************  Bit definition for ADC_SMPR1 register  *******************/
+#define  ADC_SMPR1_SMP10                     ((uint32_t)0x00000007)        /*!<SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define  ADC_SMPR1_SMP10_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP10_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP10_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP11                     ((uint32_t)0x00000038)        /*!<SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define  ADC_SMPR1_SMP11_0                   ((uint32_t)0x00000008)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP11_1                   ((uint32_t)0x00000010)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP11_2                   ((uint32_t)0x00000020)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP12                     ((uint32_t)0x000001C0)        /*!<SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define  ADC_SMPR1_SMP12_0                   ((uint32_t)0x00000040)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP12_1                   ((uint32_t)0x00000080)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP12_2                   ((uint32_t)0x00000100)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP13                     ((uint32_t)0x00000E00)        /*!<SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define  ADC_SMPR1_SMP13_0                   ((uint32_t)0x00000200)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP13_1                   ((uint32_t)0x00000400)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP13_2                   ((uint32_t)0x00000800)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP14                     ((uint32_t)0x00007000)        /*!<SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define  ADC_SMPR1_SMP14_0                   ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP14_1                   ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP14_2                   ((uint32_t)0x00004000)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP15                     ((uint32_t)0x00038000)        /*!<SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define  ADC_SMPR1_SMP15_0                   ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP15_1                   ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP15_2                   ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP16                     ((uint32_t)0x001C0000)        /*!<SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define  ADC_SMPR1_SMP16_0                   ((uint32_t)0x00040000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP16_1                   ((uint32_t)0x00080000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP16_2                   ((uint32_t)0x00100000)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP17                     ((uint32_t)0x00E00000)        /*!<SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define  ADC_SMPR1_SMP17_0                   ((uint32_t)0x00200000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP17_1                   ((uint32_t)0x00400000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP17_2                   ((uint32_t)0x00800000)        /*!<Bit 2 */
+#define  ADC_SMPR1_SMP18                     ((uint32_t)0x07000000)        /*!<SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define  ADC_SMPR1_SMP18_0                   ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  ADC_SMPR1_SMP18_1                   ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  ADC_SMPR1_SMP18_2                   ((uint32_t)0x04000000)        /*!<Bit 2 */
+
+/******************  Bit definition for ADC_SMPR2 register  *******************/
+#define  ADC_SMPR2_SMP0                      ((uint32_t)0x00000007)        /*!<SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define  ADC_SMPR2_SMP0_0                    ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP0_1                    ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP0_2                    ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP1                      ((uint32_t)0x00000038)        /*!<SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define  ADC_SMPR2_SMP1_0                    ((uint32_t)0x00000008)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP1_1                    ((uint32_t)0x00000010)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP1_2                    ((uint32_t)0x00000020)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP2                      ((uint32_t)0x000001C0)        /*!<SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define  ADC_SMPR2_SMP2_0                    ((uint32_t)0x00000040)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP2_1                    ((uint32_t)0x00000080)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP2_2                    ((uint32_t)0x00000100)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP3                      ((uint32_t)0x00000E00)        /*!<SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define  ADC_SMPR2_SMP3_0                    ((uint32_t)0x00000200)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP3_1                    ((uint32_t)0x00000400)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP3_2                    ((uint32_t)0x00000800)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP4                      ((uint32_t)0x00007000)        /*!<SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define  ADC_SMPR2_SMP4_0                    ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP4_1                    ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP4_2                    ((uint32_t)0x00004000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP5                      ((uint32_t)0x00038000)        /*!<SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define  ADC_SMPR2_SMP5_0                    ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP5_1                    ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP5_2                    ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP6                      ((uint32_t)0x001C0000)        /*!<SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define  ADC_SMPR2_SMP6_0                    ((uint32_t)0x00040000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP6_1                    ((uint32_t)0x00080000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP6_2                    ((uint32_t)0x00100000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP7                      ((uint32_t)0x00E00000)        /*!<SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define  ADC_SMPR2_SMP7_0                    ((uint32_t)0x00200000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP7_1                    ((uint32_t)0x00400000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP7_2                    ((uint32_t)0x00800000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP8                      ((uint32_t)0x07000000)        /*!<SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define  ADC_SMPR2_SMP8_0                    ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP8_1                    ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP8_2                    ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  ADC_SMPR2_SMP9                      ((uint32_t)0x38000000)        /*!<SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define  ADC_SMPR2_SMP9_0                    ((uint32_t)0x08000000)        /*!<Bit 0 */
+#define  ADC_SMPR2_SMP9_1                    ((uint32_t)0x10000000)        /*!<Bit 1 */
+#define  ADC_SMPR2_SMP9_2                    ((uint32_t)0x20000000)        /*!<Bit 2 */
+
+/******************  Bit definition for ADC_JOFR1 register  *******************/
+#define  ADC_JOFR1_JOFFSET1                  ((uint32_t)0x0FFF)            /*!<Data offset for injected channel 1 */
+
+/******************  Bit definition for ADC_JOFR2 register  *******************/
+#define  ADC_JOFR2_JOFFSET2                  ((uint32_t)0x0FFF)            /*!<Data offset for injected channel 2 */
+
+/******************  Bit definition for ADC_JOFR3 register  *******************/
+#define  ADC_JOFR3_JOFFSET3                  ((uint32_t)0x0FFF)            /*!<Data offset for injected channel 3 */
+
+/******************  Bit definition for ADC_JOFR4 register  *******************/
+#define  ADC_JOFR4_JOFFSET4                  ((uint32_t)0x0FFF)            /*!<Data offset for injected channel 4 */
+
+/*******************  Bit definition for ADC_HTR register  ********************/
+#define  ADC_HTR_HT                          ((uint32_t)0x0FFF)            /*!<Analog watchdog high threshold */
+
+/*******************  Bit definition for ADC_LTR register  ********************/
+#define  ADC_LTR_LT                          ((uint32_t)0x0FFF)            /*!<Analog watchdog low threshold */
+
+/*******************  Bit definition for ADC_SQR1 register  *******************/
+#define  ADC_SQR1_SQ13                       ((uint32_t)0x0000001F)        /*!<SQ13[4:0] bits (13th conversion in regular sequence) */
+#define  ADC_SQR1_SQ13_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SQR1_SQ13_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SQR1_SQ13_2                     ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SQR1_SQ13_3                     ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_SQR1_SQ13_4                     ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_SQR1_SQ14                       ((uint32_t)0x000003E0)        /*!<SQ14[4:0] bits (14th conversion in regular sequence) */
+#define  ADC_SQR1_SQ14_0                     ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  ADC_SQR1_SQ14_1                     ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  ADC_SQR1_SQ14_2                     ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  ADC_SQR1_SQ14_3                     ((uint32_t)0x00000100)        /*!<Bit 3 */
+#define  ADC_SQR1_SQ14_4                     ((uint32_t)0x00000200)        /*!<Bit 4 */
+#define  ADC_SQR1_SQ15                       ((uint32_t)0x00007C00)        /*!<SQ15[4:0] bits (15th conversion in regular sequence) */
+#define  ADC_SQR1_SQ15_0                     ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  ADC_SQR1_SQ15_1                     ((uint32_t)0x00000800)        /*!<Bit 1 */
+#define  ADC_SQR1_SQ15_2                     ((uint32_t)0x00001000)        /*!<Bit 2 */
+#define  ADC_SQR1_SQ15_3                     ((uint32_t)0x00002000)        /*!<Bit 3 */
+#define  ADC_SQR1_SQ15_4                     ((uint32_t)0x00004000)        /*!<Bit 4 */
+#define  ADC_SQR1_SQ16                       ((uint32_t)0x000F8000)        /*!<SQ16[4:0] bits (16th conversion in regular sequence) */
+#define  ADC_SQR1_SQ16_0                     ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SQR1_SQ16_1                     ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SQR1_SQ16_2                     ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SQR1_SQ16_3                     ((uint32_t)0x00040000)        /*!<Bit 3 */
+#define  ADC_SQR1_SQ16_4                     ((uint32_t)0x00080000)        /*!<Bit 4 */
+#define  ADC_SQR1_L                          ((uint32_t)0x00F00000)        /*!<L[3:0] bits (Regular channel sequence length) */
+#define  ADC_SQR1_L_0                        ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_SQR1_L_1                        ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  ADC_SQR1_L_2                        ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  ADC_SQR1_L_3                        ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+/*******************  Bit definition for ADC_SQR2 register  *******************/
+#define  ADC_SQR2_SQ7                        ((uint32_t)0x0000001F)        /*!<SQ7[4:0] bits (7th conversion in regular sequence) */
+#define  ADC_SQR2_SQ7_0                      ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ7_1                      ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ7_2                      ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ7_3                      ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ7_4                      ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ8                        ((uint32_t)0x000003E0)        /*!<SQ8[4:0] bits (8th conversion in regular sequence) */
+#define  ADC_SQR2_SQ8_0                      ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ8_1                      ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ8_2                      ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ8_3                      ((uint32_t)0x00000100)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ8_4                      ((uint32_t)0x00000200)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ9                        ((uint32_t)0x00007C00)        /*!<SQ9[4:0] bits (9th conversion in regular sequence) */
+#define  ADC_SQR2_SQ9_0                      ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ9_1                      ((uint32_t)0x00000800)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ9_2                      ((uint32_t)0x00001000)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ9_3                      ((uint32_t)0x00002000)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ9_4                      ((uint32_t)0x00004000)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ10                       ((uint32_t)0x000F8000)        /*!<SQ10[4:0] bits (10th conversion in regular sequence) */
+#define  ADC_SQR2_SQ10_0                     ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ10_1                     ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ10_2                     ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ10_3                     ((uint32_t)0x00040000)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ10_4                     ((uint32_t)0x00080000)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ11                       ((uint32_t)0x01F00000)        /*!<SQ11[4:0] bits (11th conversion in regular sequence) */
+#define  ADC_SQR2_SQ11_0                     ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ11_1                     ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ11_2                     ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ11_3                     ((uint32_t)0x00800000)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ11_4                     ((uint32_t)0x01000000)        /*!<Bit 4 */
+#define  ADC_SQR2_SQ12                       ((uint32_t)0x3E000000)        /*!<SQ12[4:0] bits (12th conversion in regular sequence) */
+#define  ADC_SQR2_SQ12_0                     ((uint32_t)0x02000000)        /*!<Bit 0 */
+#define  ADC_SQR2_SQ12_1                     ((uint32_t)0x04000000)        /*!<Bit 1 */
+#define  ADC_SQR2_SQ12_2                     ((uint32_t)0x08000000)        /*!<Bit 2 */
+#define  ADC_SQR2_SQ12_3                     ((uint32_t)0x10000000)        /*!<Bit 3 */
+#define  ADC_SQR2_SQ12_4                     ((uint32_t)0x20000000)        /*!<Bit 4 */
+
+/*******************  Bit definition for ADC_SQR3 register  *******************/
+#define  ADC_SQR3_SQ1                        ((uint32_t)0x0000001F)        /*!<SQ1[4:0] bits (1st conversion in regular sequence) */
+#define  ADC_SQR3_SQ1_0                      ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ1_1                      ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ1_2                      ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ1_3                      ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ1_4                      ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ2                        ((uint32_t)0x000003E0)        /*!<SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define  ADC_SQR3_SQ2_0                      ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ2_1                      ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ2_2                      ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ2_3                      ((uint32_t)0x00000100)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ2_4                      ((uint32_t)0x00000200)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ3                        ((uint32_t)0x00007C00)        /*!<SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define  ADC_SQR3_SQ3_0                      ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ3_1                      ((uint32_t)0x00000800)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ3_2                      ((uint32_t)0x00001000)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ3_3                      ((uint32_t)0x00002000)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ3_4                      ((uint32_t)0x00004000)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ4                        ((uint32_t)0x000F8000)        /*!<SQ4[4:0] bits (4th conversion in regular sequence) */
+#define  ADC_SQR3_SQ4_0                      ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ4_1                      ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ4_2                      ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ4_3                      ((uint32_t)0x00040000)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ4_4                      ((uint32_t)0x00080000)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ5                        ((uint32_t)0x01F00000)        /*!<SQ5[4:0] bits (5th conversion in regular sequence) */
+#define  ADC_SQR3_SQ5_0                      ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ5_1                      ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ5_2                      ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ5_3                      ((uint32_t)0x00800000)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ5_4                      ((uint32_t)0x01000000)        /*!<Bit 4 */
+#define  ADC_SQR3_SQ6                        ((uint32_t)0x3E000000)        /*!<SQ6[4:0] bits (6th conversion in regular sequence) */
+#define  ADC_SQR3_SQ6_0                      ((uint32_t)0x02000000)        /*!<Bit 0 */
+#define  ADC_SQR3_SQ6_1                      ((uint32_t)0x04000000)        /*!<Bit 1 */
+#define  ADC_SQR3_SQ6_2                      ((uint32_t)0x08000000)        /*!<Bit 2 */
+#define  ADC_SQR3_SQ6_3                      ((uint32_t)0x10000000)        /*!<Bit 3 */
+#define  ADC_SQR3_SQ6_4                      ((uint32_t)0x20000000)        /*!<Bit 4 */
+
+/*******************  Bit definition for ADC_JSQR register  *******************/
+#define  ADC_JSQR_JSQ1                       ((uint32_t)0x0000001F)        /*!<JSQ1[4:0] bits (1st conversion in injected sequence) */  
+#define  ADC_JSQR_JSQ1_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_JSQR_JSQ1_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_JSQR_JSQ1_2                     ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_JSQR_JSQ1_3                     ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_JSQR_JSQ1_4                     ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_JSQR_JSQ2                       ((uint32_t)0x000003E0)        /*!<JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define  ADC_JSQR_JSQ2_0                     ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  ADC_JSQR_JSQ2_1                     ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  ADC_JSQR_JSQ2_2                     ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  ADC_JSQR_JSQ2_3                     ((uint32_t)0x00000100)        /*!<Bit 3 */
+#define  ADC_JSQR_JSQ2_4                     ((uint32_t)0x00000200)        /*!<Bit 4 */
+#define  ADC_JSQR_JSQ3                       ((uint32_t)0x00007C00)        /*!<JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define  ADC_JSQR_JSQ3_0                     ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  ADC_JSQR_JSQ3_1                     ((uint32_t)0x00000800)        /*!<Bit 1 */
+#define  ADC_JSQR_JSQ3_2                     ((uint32_t)0x00001000)        /*!<Bit 2 */
+#define  ADC_JSQR_JSQ3_3                     ((uint32_t)0x00002000)        /*!<Bit 3 */
+#define  ADC_JSQR_JSQ3_4                     ((uint32_t)0x00004000)        /*!<Bit 4 */
+#define  ADC_JSQR_JSQ4                       ((uint32_t)0x000F8000)        /*!<JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define  ADC_JSQR_JSQ4_0                     ((uint32_t)0x00008000)        /*!<Bit 0 */
+#define  ADC_JSQR_JSQ4_1                     ((uint32_t)0x00010000)        /*!<Bit 1 */
+#define  ADC_JSQR_JSQ4_2                     ((uint32_t)0x00020000)        /*!<Bit 2 */
+#define  ADC_JSQR_JSQ4_3                     ((uint32_t)0x00040000)        /*!<Bit 3 */
+#define  ADC_JSQR_JSQ4_4                     ((uint32_t)0x00080000)        /*!<Bit 4 */
+#define  ADC_JSQR_JL                         ((uint32_t)0x00300000)        /*!<JL[1:0] bits (Injected Sequence length) */
+#define  ADC_JSQR_JL_0                       ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  ADC_JSQR_JL_1                       ((uint32_t)0x00200000)        /*!<Bit 1 */
+
+/*******************  Bit definition for ADC_JDR1 register  *******************/
+#define  ADC_JDR1_JDATA                      ((uint16_t)0xFFFF)            /*!<Injected data */
+
+/*******************  Bit definition for ADC_JDR2 register  *******************/
+#define  ADC_JDR2_JDATA                      ((uint16_t)0xFFFF)            /*!<Injected data */
+
+/*******************  Bit definition for ADC_JDR3 register  *******************/
+#define  ADC_JDR3_JDATA                      ((uint16_t)0xFFFF)            /*!<Injected data */
+
+/*******************  Bit definition for ADC_JDR4 register  *******************/
+#define  ADC_JDR4_JDATA                      ((uint16_t)0xFFFF)            /*!<Injected data */
+
+/********************  Bit definition for ADC_DR register  ********************/
+#define  ADC_DR_DATA                         ((uint32_t)0x0000FFFF)        /*!<Regular data */
+#define  ADC_DR_ADC2DATA                     ((uint32_t)0xFFFF0000)        /*!<ADC2 data */
+
+/*******************  Bit definition for ADC_CSR register  ********************/
+#define  ADC_CSR_AWD1                        ((uint32_t)0x00000001)        /*!<ADC1 Analog watchdog flag               */
+#define  ADC_CSR_EOC1                        ((uint32_t)0x00000002)        /*!<ADC1 End of conversion                  */
+#define  ADC_CSR_JEOC1                       ((uint32_t)0x00000004)        /*!<ADC1 Injected channel end of conversion */
+#define  ADC_CSR_JSTRT1                      ((uint32_t)0x00000008)        /*!<ADC1 Injected channel Start flag        */
+#define  ADC_CSR_STRT1                       ((uint32_t)0x00000010)        /*!<ADC1 Regular channel Start flag         */
+#define  ADC_CSR_DOVR1                       ((uint32_t)0x00000020)        /*!<ADC1 DMA overrun  flag                  */
+#define  ADC_CSR_AWD2                        ((uint32_t)0x00000100)        /*!<ADC2 Analog watchdog flag               */
+#define  ADC_CSR_EOC2                        ((uint32_t)0x00000200)        /*!<ADC2 End of conversion                  */
+#define  ADC_CSR_JEOC2                       ((uint32_t)0x00000400)        /*!<ADC2 Injected channel end of conversion */
+#define  ADC_CSR_JSTRT2                      ((uint32_t)0x00000800)        /*!<ADC2 Injected channel Start flag        */
+#define  ADC_CSR_STRT2                       ((uint32_t)0x00001000)        /*!<ADC2 Regular channel Start flag         */
+#define  ADC_CSR_DOVR2                       ((uint32_t)0x00002000)        /*!<ADC2 DMA overrun  flag                  */
+#define  ADC_CSR_AWD3                        ((uint32_t)0x00010000)        /*!<ADC3 Analog watchdog flag               */
+#define  ADC_CSR_EOC3                        ((uint32_t)0x00020000)        /*!<ADC3 End of conversion                  */
+#define  ADC_CSR_JEOC3                       ((uint32_t)0x00040000)        /*!<ADC3 Injected channel end of conversion */
+#define  ADC_CSR_JSTRT3                      ((uint32_t)0x00080000)        /*!<ADC3 Injected channel Start flag        */
+#define  ADC_CSR_STRT3                       ((uint32_t)0x00100000)        /*!<ADC3 Regular channel Start flag         */
+#define  ADC_CSR_DOVR3                       ((uint32_t)0x00200000)        /*!<ADC3 DMA overrun  flag                  */
+
+/*******************  Bit definition for ADC_CCR register  ********************/
+#define  ADC_CCR_MULTI                       ((uint32_t)0x0000001F)        /*!<MULTI[4:0] bits (Multi-ADC mode selection) */  
+#define  ADC_CCR_MULTI_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  ADC_CCR_MULTI_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  ADC_CCR_MULTI_2                     ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  ADC_CCR_MULTI_3                     ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  ADC_CCR_MULTI_4                     ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  ADC_CCR_DELAY                       ((uint32_t)0x00000F00)        /*!<DELAY[3:0] bits (Delay between 2 sampling phases) */  
+#define  ADC_CCR_DELAY_0                     ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  ADC_CCR_DELAY_1                     ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  ADC_CCR_DELAY_2                     ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  ADC_CCR_DELAY_3                     ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  ADC_CCR_DDS                         ((uint32_t)0x00002000)        /*!<DMA disable selection (Multi-ADC mode) */
+#define  ADC_CCR_DMA                         ((uint32_t)0x0000C000)        /*!<DMA[1:0] bits (Direct Memory Access mode for multimode) */  
+#define  ADC_CCR_DMA_0                       ((uint32_t)0x00004000)        /*!<Bit 0 */
+#define  ADC_CCR_DMA_1                       ((uint32_t)0x00008000)        /*!<Bit 1 */
+#define  ADC_CCR_ADCPRE                      ((uint32_t)0x00030000)        /*!<ADCPRE[1:0] bits (ADC prescaler) */  
+#define  ADC_CCR_ADCPRE_0                    ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  ADC_CCR_ADCPRE_1                    ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  ADC_CCR_VBATE                       ((uint32_t)0x00400000)        /*!<VBAT Enable */
+#define  ADC_CCR_TSVREFE                     ((uint32_t)0x00800000)        /*!<Temperature Sensor and VREFINT Enable */
+
+/*******************  Bit definition for ADC_CDR register  ********************/
+#define  ADC_CDR_DATA1                      ((uint32_t)0x0000FFFF)         /*!<1st data of a pair of regular conversions */
+#define  ADC_CDR_DATA2                      ((uint32_t)0xFFFF0000)         /*!<2nd data of a pair of regular conversions */
+
+/******************************************************************************/
+/*                                                                            */
+/*                         Controller Area Network                            */
+/*                                                                            */
+/******************************************************************************/
+/*!<CAN control and status registers */
+/*******************  Bit definition for CAN_MCR register  ********************/
+#define  CAN_MCR_INRQ                        ((uint32_t)0x00000001)        /*!<Initialization Request            */
+#define  CAN_MCR_SLEEP                       ((uint32_t)0x00000002)        /*!<Sleep Mode Request                */
+#define  CAN_MCR_TXFP                        ((uint32_t)0x00000004)        /*!<Transmit FIFO Priority            */
+#define  CAN_MCR_RFLM                        ((uint32_t)0x00000008)        /*!<Receive FIFO Locked Mode          */
+#define  CAN_MCR_NART                        ((uint32_t)0x00000010)        /*!<No Automatic Retransmission       */
+#define  CAN_MCR_AWUM                        ((uint32_t)0x00000020)        /*!<Automatic Wakeup Mode             */
+#define  CAN_MCR_ABOM                        ((uint32_t)0x00000040)        /*!<Automatic Bus-Off Management      */
+#define  CAN_MCR_TTCM                        ((uint32_t)0x00000080)        /*!<Time Triggered Communication Mode */
+#define  CAN_MCR_RESET                       ((uint32_t)0x00008000)        /*!<bxCAN software master reset       */
+                                                                           
+/*******************  Bit definition for CAN_MSR register  ********************/
+#define  CAN_MSR_INAK                        ((uint32_t)0x00000001)        /*!<Initialization Acknowledge  */
+#define  CAN_MSR_SLAK                        ((uint32_t)0x00000002)        /*!<Sleep Acknowledge           */
+#define  CAN_MSR_ERRI                        ((uint32_t)0x00000004)        /*!<Error Interrupt             */
+#define  CAN_MSR_WKUI                        ((uint32_t)0x00000008)        /*!<Wakeup Interrupt            */
+#define  CAN_MSR_SLAKI                       ((uint32_t)0x00000010)        /*!<Sleep Acknowledge Interrupt */
+#define  CAN_MSR_TXM                         ((uint32_t)0x00000100)        /*!<Transmit Mode               */
+#define  CAN_MSR_RXM                         ((uint32_t)0x00000200)        /*!<Receive Mode                */
+#define  CAN_MSR_SAMP                        ((uint32_t)0x00000400)        /*!<Last Sample Point           */
+#define  CAN_MSR_RX                          ((uint32_t)0x00000800)        /*!<CAN Rx Signal               */
+
+/*******************  Bit definition for CAN_TSR register  ********************/
+#define  CAN_TSR_RQCP0                       ((uint32_t)0x00000001)        /*!<Request Completed Mailbox0      */
+#define  CAN_TSR_TXOK0                       ((uint32_t)0x00000002)        /*!<Transmission OK of Mailbox0     */
+#define  CAN_TSR_ALST0                       ((uint32_t)0x00000004)        /*!<Arbitration Lost for Mailbox0   */
+#define  CAN_TSR_TERR0                       ((uint32_t)0x00000008)        /*!<Transmission Error of Mailbox0  */
+#define  CAN_TSR_ABRQ0                       ((uint32_t)0x00000080)        /*!<Abort Request for Mailbox0      */
+#define  CAN_TSR_RQCP1                       ((uint32_t)0x00000100)        /*!<Request Completed Mailbox1      */
+#define  CAN_TSR_TXOK1                       ((uint32_t)0x00000200)        /*!<Transmission OK of Mailbox1     */
+#define  CAN_TSR_ALST1                       ((uint32_t)0x00000400)        /*!<Arbitration Lost for Mailbox1   */
+#define  CAN_TSR_TERR1                       ((uint32_t)0x00000800)        /*!<Transmission Error of Mailbox1  */
+#define  CAN_TSR_ABRQ1                       ((uint32_t)0x00008000)        /*!<Abort Request for Mailbox 1     */
+#define  CAN_TSR_RQCP2                       ((uint32_t)0x00010000)        /*!<Request Completed Mailbox2      */
+#define  CAN_TSR_TXOK2                       ((uint32_t)0x00020000)        /*!<Transmission OK of Mailbox 2    */
+#define  CAN_TSR_ALST2                       ((uint32_t)0x00040000)        /*!<Arbitration Lost for mailbox 2  */
+#define  CAN_TSR_TERR2                       ((uint32_t)0x00080000)        /*!<Transmission Error of Mailbox 2 */
+#define  CAN_TSR_ABRQ2                       ((uint32_t)0x00800000)        /*!<Abort Request for Mailbox 2     */
+#define  CAN_TSR_CODE                        ((uint32_t)0x03000000)        /*!<Mailbox Code                    */
+
+#define  CAN_TSR_TME                         ((uint32_t)0x1C000000)        /*!<TME[2:0] bits */
+#define  CAN_TSR_TME0                        ((uint32_t)0x04000000)        /*!<Transmit Mailbox 0 Empty */
+#define  CAN_TSR_TME1                        ((uint32_t)0x08000000)        /*!<Transmit Mailbox 1 Empty */
+#define  CAN_TSR_TME2                        ((uint32_t)0x10000000)        /*!<Transmit Mailbox 2 Empty */
+
+#define  CAN_TSR_LOW                         ((uint32_t)0xE0000000)        /*!<LOW[2:0] bits */
+#define  CAN_TSR_LOW0                        ((uint32_t)0x20000000)        /*!<Lowest Priority Flag for Mailbox 0 */
+#define  CAN_TSR_LOW1                        ((uint32_t)0x40000000)        /*!<Lowest Priority Flag for Mailbox 1 */
+#define  CAN_TSR_LOW2                        ((uint32_t)0x80000000)        /*!<Lowest Priority Flag for Mailbox 2 */
+
+/*******************  Bit definition for CAN_RF0R register  *******************/
+#define  CAN_RF0R_FMP0                       ((uint32_t)0x00000003)        /*!<FIFO 0 Message Pending        */
+#define  CAN_RF0R_FULL0                      ((uint32_t)0x00000008)        /*!<FIFO 0 Full                   */
+#define  CAN_RF0R_FOVR0                      ((uint32_t)0x00000010)        /*!<FIFO 0 Overrun                */
+#define  CAN_RF0R_RFOM0                      ((uint32_t)0x00000020)        /*!<Release FIFO 0 Output Mailbox */
+
+/*******************  Bit definition for CAN_RF1R register  *******************/
+#define  CAN_RF1R_FMP1                       ((uint32_t)0x00000003)        /*!<FIFO 1 Message Pending        */
+#define  CAN_RF1R_FULL1                      ((uint32_t)0x00000008)        /*!<FIFO 1 Full                   */
+#define  CAN_RF1R_FOVR1                      ((uint32_t)0x00000010)        /*!<FIFO 1 Overrun                */
+#define  CAN_RF1R_RFOM1                      ((uint32_t)0x00000020)        /*!<Release FIFO 1 Output Mailbox */
+
+/********************  Bit definition for CAN_IER register  *******************/
+#define  CAN_IER_TMEIE                       ((uint32_t)0x00000001)        /*!<Transmit Mailbox Empty Interrupt Enable */
+#define  CAN_IER_FMPIE0                      ((uint32_t)0x00000002)        /*!<FIFO Message Pending Interrupt Enable   */
+#define  CAN_IER_FFIE0                       ((uint32_t)0x00000004)        /*!<FIFO Full Interrupt Enable              */
+#define  CAN_IER_FOVIE0                      ((uint32_t)0x00000008)        /*!<FIFO Overrun Interrupt Enable           */
+#define  CAN_IER_FMPIE1                      ((uint32_t)0x00000010)        /*!<FIFO Message Pending Interrupt Enable   */
+#define  CAN_IER_FFIE1                       ((uint32_t)0x00000020)        /*!<FIFO Full Interrupt Enable              */
+#define  CAN_IER_FOVIE1                      ((uint32_t)0x00000040)        /*!<FIFO Overrun Interrupt Enable           */
+#define  CAN_IER_EWGIE                       ((uint32_t)0x00000100)        /*!<Error Warning Interrupt Enable          */
+#define  CAN_IER_EPVIE                       ((uint32_t)0x00000200)        /*!<Error Passive Interrupt Enable          */
+#define  CAN_IER_BOFIE                       ((uint32_t)0x00000400)        /*!<Bus-Off Interrupt Enable                */
+#define  CAN_IER_LECIE                       ((uint32_t)0x00000800)        /*!<Last Error Code Interrupt Enable        */
+#define  CAN_IER_ERRIE                       ((uint32_t)0x00008000)        /*!<Error Interrupt Enable                  */
+#define  CAN_IER_WKUIE                       ((uint32_t)0x00010000)        /*!<Wakeup Interrupt Enable                 */
+#define  CAN_IER_SLKIE                       ((uint32_t)0x00020000)        /*!<Sleep Interrupt Enable                  */
+
+/********************  Bit definition for CAN_ESR register  *******************/
+#define  CAN_ESR_EWGF                        ((uint32_t)0x00000001)        /*!<Error Warning Flag */
+#define  CAN_ESR_EPVF                        ((uint32_t)0x00000002)        /*!<Error Passive Flag */
+#define  CAN_ESR_BOFF                        ((uint32_t)0x00000004)        /*!<Bus-Off Flag */
+
+#define  CAN_ESR_LEC                         ((uint32_t)0x00000070)        /*!<LEC[2:0] bits (Last Error Code) */
+#define  CAN_ESR_LEC_0                       ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  CAN_ESR_LEC_1                       ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  CAN_ESR_LEC_2                       ((uint32_t)0x00000040)        /*!<Bit 2 */
+
+#define  CAN_ESR_TEC                         ((uint32_t)0x00FF0000)        /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define  CAN_ESR_REC                         ((uint32_t)0xFF000000)        /*!<Receive Error Counter */
+
+/*******************  Bit definition for CAN_BTR register  ********************/
+#define  CAN_BTR_BRP                         ((uint32_t)0x000003FF)        /*!<Baud Rate Prescaler           */
+#define  CAN_BTR_TS1                         ((uint32_t)0x000F0000)        /*!<Time Segment 1                */
+#define  CAN_BTR_TS1_0                       ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  CAN_BTR_TS1_1                       ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  CAN_BTR_TS1_2                       ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  CAN_BTR_TS1_3                       ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  CAN_BTR_TS2                         ((uint32_t)0x00700000)        /*!<Time Segment 2                */
+#define  CAN_BTR_TS2_0                       ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  CAN_BTR_TS2_1                       ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  CAN_BTR_TS2_2                       ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  CAN_BTR_SJW                         ((uint32_t)0x03000000)        /*!<Resynchronization Jump Width  */
+#define  CAN_BTR_SJW_0                       ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  CAN_BTR_SJW_1                       ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  CAN_BTR_LBKM                        ((uint32_t)0x40000000)        /*!<Loop Back Mode (Debug)        */
+#define  CAN_BTR_SILM                        ((uint32_t)0x80000000)        /*!<Silent Mode                   */
+
+/*!<Mailbox registers */
+/******************  Bit definition for CAN_TI0R register  ********************/
+#define  CAN_TI0R_TXRQ                       ((uint32_t)0x00000001)        /*!<Transmit Mailbox Request                   */
+#define  CAN_TI0R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request                */
+#define  CAN_TI0R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension                       */
+#define  CAN_TI0R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended Identifier                        */
+#define  CAN_TI0R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/******************  Bit definition for CAN_TDT0R register  *******************/
+#define  CAN_TDT0R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code     */
+#define  CAN_TDT0R_TGT                       ((uint32_t)0x00000100)        /*!<Transmit Global Time */
+#define  CAN_TDT0R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp   */
+
+/******************  Bit definition for CAN_TDL0R register  *******************/
+#define  CAN_TDL0R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_TDL0R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_TDL0R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_TDL0R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/******************  Bit definition for CAN_TDH0R register  *******************/
+#define  CAN_TDH0R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_TDH0R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_TDH0R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_TDH0R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*******************  Bit definition for CAN_TI1R register  *******************/
+#define  CAN_TI1R_TXRQ                       ((uint32_t)0x00000001)        /*!<Transmit Mailbox Request                   */
+#define  CAN_TI1R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request                */
+#define  CAN_TI1R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension                       */
+#define  CAN_TI1R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended Identifier                        */
+#define  CAN_TI1R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_TDT1R register  ******************/
+#define  CAN_TDT1R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code     */
+#define  CAN_TDT1R_TGT                       ((uint32_t)0x00000100)        /*!<Transmit Global Time */
+#define  CAN_TDT1R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp   */
+
+/*******************  Bit definition for CAN_TDL1R register  ******************/
+#define  CAN_TDL1R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_TDL1R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_TDL1R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_TDL1R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/*******************  Bit definition for CAN_TDH1R register  ******************/
+#define  CAN_TDH1R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_TDH1R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_TDH1R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_TDH1R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*******************  Bit definition for CAN_TI2R register  *******************/
+#define  CAN_TI2R_TXRQ                       ((uint32_t)0x00000001)        /*!<Transmit Mailbox Request                   */
+#define  CAN_TI2R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request                */
+#define  CAN_TI2R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension                       */
+#define  CAN_TI2R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended identifier                        */
+#define  CAN_TI2R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_TDT2R register  ******************/  
+#define  CAN_TDT2R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code      */
+#define  CAN_TDT2R_TGT                       ((uint32_t)0x00000100)        /*!<Transmit Global Time  */
+#define  CAN_TDT2R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp    */
+
+/*******************  Bit definition for CAN_TDL2R register  ******************/
+#define  CAN_TDL2R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_TDL2R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_TDL2R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_TDL2R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/*******************  Bit definition for CAN_TDH2R register  ******************/
+#define  CAN_TDH2R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_TDH2R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_TDH2R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_TDH2R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*******************  Bit definition for CAN_RI0R register  *******************/
+#define  CAN_RI0R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request                */
+#define  CAN_RI0R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension                       */
+#define  CAN_RI0R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended Identifier                        */
+#define  CAN_RI0R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_RDT0R register  ******************/
+#define  CAN_RDT0R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code */
+#define  CAN_RDT0R_FMI                       ((uint32_t)0x0000FF00)        /*!<Filter Match Index */
+#define  CAN_RDT0R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp */
+
+/*******************  Bit definition for CAN_RDL0R register  ******************/
+#define  CAN_RDL0R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_RDL0R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_RDL0R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_RDL0R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/*******************  Bit definition for CAN_RDH0R register  ******************/
+#define  CAN_RDH0R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_RDH0R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_RDH0R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_RDH0R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*******************  Bit definition for CAN_RI1R register  *******************/
+#define  CAN_RI1R_RTR                        ((uint32_t)0x00000002)        /*!<Remote Transmission Request                */
+#define  CAN_RI1R_IDE                        ((uint32_t)0x00000004)        /*!<Identifier Extension                       */
+#define  CAN_RI1R_EXID                       ((uint32_t)0x001FFFF8)        /*!<Extended identifier                        */
+#define  CAN_RI1R_STID                       ((uint32_t)0xFFE00000)        /*!<Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_RDT1R register  ******************/
+#define  CAN_RDT1R_DLC                       ((uint32_t)0x0000000F)        /*!<Data Length Code   */
+#define  CAN_RDT1R_FMI                       ((uint32_t)0x0000FF00)        /*!<Filter Match Index */
+#define  CAN_RDT1R_TIME                      ((uint32_t)0xFFFF0000)        /*!<Message Time Stamp */
+
+/*******************  Bit definition for CAN_RDL1R register  ******************/
+#define  CAN_RDL1R_DATA0                     ((uint32_t)0x000000FF)        /*!<Data byte 0 */
+#define  CAN_RDL1R_DATA1                     ((uint32_t)0x0000FF00)        /*!<Data byte 1 */
+#define  CAN_RDL1R_DATA2                     ((uint32_t)0x00FF0000)        /*!<Data byte 2 */
+#define  CAN_RDL1R_DATA3                     ((uint32_t)0xFF000000)        /*!<Data byte 3 */
+
+/*******************  Bit definition for CAN_RDH1R register  ******************/
+#define  CAN_RDH1R_DATA4                     ((uint32_t)0x000000FF)        /*!<Data byte 4 */
+#define  CAN_RDH1R_DATA5                     ((uint32_t)0x0000FF00)        /*!<Data byte 5 */
+#define  CAN_RDH1R_DATA6                     ((uint32_t)0x00FF0000)        /*!<Data byte 6 */
+#define  CAN_RDH1R_DATA7                     ((uint32_t)0xFF000000)        /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/*******************  Bit definition for CAN_FMR register  ********************/
+#define  CAN_FMR_FINIT                       ((uint8_t)0x01)               /*!<Filter Init Mode */
+#define  CAN_FMR_CAN2SB                      ((uint32_t)0x00003F00)        /*!<CAN2 start bank */
+
+/*******************  Bit definition for CAN_FM1R register  *******************/
+#define  CAN_FM1R_FBM                        ((uint32_t)0x3FFF)            /*!<Filter Mode */
+#define  CAN_FM1R_FBM0                       ((uint32_t)0x0001)            /*!<Filter Init Mode bit 0  */
+#define  CAN_FM1R_FBM1                       ((uint32_t)0x0002)            /*!<Filter Init Mode bit 1  */
+#define  CAN_FM1R_FBM2                       ((uint32_t)0x0004)            /*!<Filter Init Mode bit 2  */
+#define  CAN_FM1R_FBM3                       ((uint32_t)0x0008)            /*!<Filter Init Mode bit 3  */
+#define  CAN_FM1R_FBM4                       ((uint32_t)0x0010)            /*!<Filter Init Mode bit 4  */
+#define  CAN_FM1R_FBM5                       ((uint32_t)0x0020)            /*!<Filter Init Mode bit 5  */
+#define  CAN_FM1R_FBM6                       ((uint32_t)0x0040)            /*!<Filter Init Mode bit 6  */
+#define  CAN_FM1R_FBM7                       ((uint32_t)0x0080)            /*!<Filter Init Mode bit 7  */
+#define  CAN_FM1R_FBM8                       ((uint32_t)0x0100)            /*!<Filter Init Mode bit 8  */
+#define  CAN_FM1R_FBM9                       ((uint32_t)0x0200)            /*!<Filter Init Mode bit 9  */
+#define  CAN_FM1R_FBM10                      ((uint32_t)0x0400)            /*!<Filter Init Mode bit 10 */
+#define  CAN_FM1R_FBM11                      ((uint32_t)0x0800)            /*!<Filter Init Mode bit 11 */
+#define  CAN_FM1R_FBM12                      ((uint32_t)0x1000)            /*!<Filter Init Mode bit 12 */
+#define  CAN_FM1R_FBM13                      ((uint32_t)0x2000)            /*!<Filter Init Mode bit 13 */
+
+/*******************  Bit definition for CAN_FS1R register  *******************/
+#define  CAN_FS1R_FSC                        ((uint32_t)0x00003FFF)        /*!<Filter Scale Configuration        */
+#define  CAN_FS1R_FSC0                       ((uint32_t)0x00000001)        /*!<Filter Scale Configuration bit 0  */
+#define  CAN_FS1R_FSC1                       ((uint32_t)0x00000002)        /*!<Filter Scale Configuration bit 1  */
+#define  CAN_FS1R_FSC2                       ((uint32_t)0x00000004)        /*!<Filter Scale Configuration bit 2  */
+#define  CAN_FS1R_FSC3                       ((uint32_t)0x00000008)        /*!<Filter Scale Configuration bit 3  */
+#define  CAN_FS1R_FSC4                       ((uint32_t)0x00000010)        /*!<Filter Scale Configuration bit 4  */
+#define  CAN_FS1R_FSC5                       ((uint32_t)0x00000020)        /*!<Filter Scale Configuration bit 5  */
+#define  CAN_FS1R_FSC6                       ((uint32_t)0x00000040)        /*!<Filter Scale Configuration bit 6  */
+#define  CAN_FS1R_FSC7                       ((uint32_t)0x00000080)        /*!<Filter Scale Configuration bit 7  */
+#define  CAN_FS1R_FSC8                       ((uint32_t)0x00000100)        /*!<Filter Scale Configuration bit 8  */
+#define  CAN_FS1R_FSC9                       ((uint32_t)0x00000200)        /*!<Filter Scale Configuration bit 9  */
+#define  CAN_FS1R_FSC10                      ((uint32_t)0x00000400)        /*!<Filter Scale Configuration bit 10 */
+#define  CAN_FS1R_FSC11                      ((uint32_t)0x00000800)        /*!<Filter Scale Configuration bit 11 */
+#define  CAN_FS1R_FSC12                      ((uint32_t)0x00001000)        /*!<Filter Scale Configuration bit 12 */
+#define  CAN_FS1R_FSC13                      ((uint32_t)0x00002000)        /*!<Filter Scale Configuration bit 13 */
+
+/******************  Bit definition for CAN_FFA1R register  *******************/
+#define  CAN_FFA1R_FFA                       ((uint32_t)0x00003FFF)        /*!<Filter FIFO Assignment */
+#define  CAN_FFA1R_FFA0                      ((uint32_t)0x00000001)        /*!<Filter FIFO Assignment for Filter 0 */
+#define  CAN_FFA1R_FFA1                      ((uint32_t)0x00000002)        /*!<Filter FIFO Assignment for Filter 1 */
+#define  CAN_FFA1R_FFA2                      ((uint32_t)0x00000004)        /*!<Filter FIFO Assignment for Filter 2 */
+#define  CAN_FFA1R_FFA3                      ((uint32_t)0x00000008)        /*!<Filter FIFO Assignment for Filter 3 */
+#define  CAN_FFA1R_FFA4                      ((uint32_t)0x00000010)        /*!<Filter FIFO Assignment for Filter 4 */
+#define  CAN_FFA1R_FFA5                      ((uint32_t)0x00000020)        /*!<Filter FIFO Assignment for Filter 5 */
+#define  CAN_FFA1R_FFA6                      ((uint32_t)0x00000040)        /*!<Filter FIFO Assignment for Filter 6 */
+#define  CAN_FFA1R_FFA7                      ((uint32_t)0x00000080)        /*!<Filter FIFO Assignment for Filter 7 */
+#define  CAN_FFA1R_FFA8                      ((uint32_t)0x00000100)        /*!<Filter FIFO Assignment for Filter 8 */
+#define  CAN_FFA1R_FFA9                      ((uint32_t)0x00000200)        /*!<Filter FIFO Assignment for Filter 9 */
+#define  CAN_FFA1R_FFA10                     ((uint32_t)0x00000400)        /*!<Filter FIFO Assignment for Filter 10 */
+#define  CAN_FFA1R_FFA11                     ((uint32_t)0x00000800)        /*!<Filter FIFO Assignment for Filter 11 */
+#define  CAN_FFA1R_FFA12                     ((uint32_t)0x00001000)        /*!<Filter FIFO Assignment for Filter 12 */
+#define  CAN_FFA1R_FFA13                     ((uint32_t)0x00002000)        /*!<Filter FIFO Assignment for Filter 13 */
+
+/*******************  Bit definition for CAN_FA1R register  *******************/
+#define  CAN_FA1R_FACT                       ((uint32_t)0x00003FFF)        /*!<Filter Active    */
+#define  CAN_FA1R_FACT0                      ((uint32_t)0x00000001)        /*!<Filter 0 Active  */
+#define  CAN_FA1R_FACT1                      ((uint32_t)0x00000002)        /*!<Filter 1 Active  */
+#define  CAN_FA1R_FACT2                      ((uint32_t)0x00000004)        /*!<Filter 2 Active  */
+#define  CAN_FA1R_FACT3                      ((uint32_t)0x00000008)        /*!<Filter 3 Active  */
+#define  CAN_FA1R_FACT4                      ((uint32_t)0x00000010)        /*!<Filter 4 Active  */
+#define  CAN_FA1R_FACT5                      ((uint32_t)0x00000020)        /*!<Filter 5 Active  */
+#define  CAN_FA1R_FACT6                      ((uint32_t)0x00000040)        /*!<Filter 6 Active  */
+#define  CAN_FA1R_FACT7                      ((uint32_t)0x00000080)        /*!<Filter 7 Active  */
+#define  CAN_FA1R_FACT8                      ((uint32_t)0x00000100)        /*!<Filter 8 Active  */
+#define  CAN_FA1R_FACT9                      ((uint32_t)0x00000200)        /*!<Filter 9 Active  */
+#define  CAN_FA1R_FACT10                     ((uint32_t)0x00000400)        /*!<Filter 10 Active */
+#define  CAN_FA1R_FACT11                     ((uint32_t)0x00000800)        /*!<Filter 11 Active */
+#define  CAN_FA1R_FACT12                     ((uint32_t)0x00001000)        /*!<Filter 12 Active */
+#define  CAN_FA1R_FACT13                     ((uint32_t)0x00002000)        /*!<Filter 13 Active */
+
+/*******************  Bit definition for CAN_F0R1 register  *******************/
+#define  CAN_F0R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F0R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F0R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F0R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F0R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F0R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F0R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F0R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F0R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F0R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F0R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F0R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F0R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F0R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F0R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F0R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F0R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F0R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F0R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F0R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F0R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F0R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F0R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F0R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F0R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F0R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F0R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F0R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F0R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F0R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F0R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F0R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F1R1 register  *******************/
+#define  CAN_F1R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F1R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F1R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F1R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F1R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F1R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F1R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F1R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F1R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F1R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F1R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F1R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F1R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F1R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F1R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F1R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F1R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F1R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F1R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F1R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F1R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F1R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F1R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F1R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F1R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F1R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F1R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F1R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F1R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F1R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F1R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F1R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F2R1 register  *******************/
+#define  CAN_F2R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F2R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F2R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F2R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F2R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F2R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F2R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F2R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F2R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F2R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F2R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F2R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F2R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F2R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F2R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F2R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F2R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F2R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F2R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F2R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F2R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F2R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F2R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F2R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F2R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F2R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F2R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F2R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F2R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F2R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F2R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F2R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F3R1 register  *******************/
+#define  CAN_F3R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F3R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F3R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F3R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F3R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F3R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F3R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F3R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F3R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F3R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F3R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F3R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F3R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F3R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F3R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F3R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F3R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F3R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F3R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F3R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F3R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F3R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F3R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F3R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F3R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F3R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F3R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F3R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F3R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F3R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F3R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F3R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F4R1 register  *******************/
+#define  CAN_F4R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F4R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F4R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F4R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F4R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F4R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F4R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F4R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F4R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F4R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F4R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F4R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F4R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F4R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F4R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F4R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F4R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F4R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F4R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F4R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F4R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F4R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F4R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F4R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F4R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F4R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F4R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F4R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F4R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F4R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F4R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F4R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F5R1 register  *******************/
+#define  CAN_F5R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F5R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F5R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F5R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F5R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F5R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F5R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F5R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F5R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F5R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F5R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F5R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F5R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F5R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F5R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F5R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F5R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F5R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F5R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F5R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F5R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F5R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F5R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F5R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F5R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F5R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F5R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F5R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F5R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F5R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F5R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F5R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F6R1 register  *******************/
+#define  CAN_F6R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F6R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F6R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F6R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F6R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F6R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F6R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F6R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F6R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F6R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F6R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F6R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F6R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F6R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F6R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F6R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F6R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F6R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F6R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F6R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F6R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F6R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F6R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F6R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F6R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F6R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F6R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F6R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F6R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F6R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F6R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F6R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F7R1 register  *******************/
+#define  CAN_F7R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F7R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F7R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F7R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F7R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F7R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F7R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F7R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F7R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F7R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F7R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F7R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F7R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F7R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F7R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F7R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F7R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F7R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F7R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F7R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F7R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F7R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F7R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F7R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F7R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F7R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F7R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F7R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F7R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F7R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F7R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F7R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F8R1 register  *******************/
+#define  CAN_F8R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F8R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F8R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F8R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F8R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F8R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F8R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F8R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F8R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F8R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F8R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F8R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F8R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F8R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F8R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F8R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F8R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F8R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F8R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F8R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F8R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F8R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F8R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F8R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F8R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F8R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F8R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F8R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F8R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F8R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F8R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F8R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F9R1 register  *******************/
+#define  CAN_F9R1_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F9R1_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F9R1_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F9R1_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F9R1_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F9R1_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F9R1_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F9R1_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F9R1_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F9R1_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F9R1_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F9R1_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F9R1_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F9R1_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F9R1_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F9R1_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F9R1_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F9R1_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F9R1_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F9R1_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F9R1_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F9R1_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F9R1_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F9R1_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F9R1_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F9R1_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F9R1_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F9R1_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F9R1_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F9R1_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F9R1_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F9R1_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F10R1 register  ******************/
+#define  CAN_F10R1_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F10R1_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F10R1_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F10R1_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F10R1_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F10R1_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F10R1_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F10R1_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F10R1_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F10R1_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F10R1_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F10R1_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F10R1_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F10R1_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F10R1_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F10R1_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F10R1_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F10R1_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F10R1_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F10R1_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F10R1_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F10R1_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F10R1_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F10R1_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F10R1_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F10R1_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F10R1_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F10R1_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F10R1_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F10R1_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F10R1_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F10R1_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F11R1 register  ******************/
+#define  CAN_F11R1_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F11R1_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F11R1_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F11R1_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F11R1_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F11R1_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F11R1_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F11R1_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F11R1_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F11R1_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F11R1_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F11R1_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F11R1_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F11R1_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F11R1_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F11R1_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F11R1_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F11R1_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F11R1_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F11R1_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F11R1_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F11R1_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F11R1_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F11R1_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F11R1_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F11R1_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F11R1_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F11R1_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F11R1_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F11R1_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F11R1_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F11R1_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F12R1 register  ******************/
+#define  CAN_F12R1_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F12R1_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F12R1_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F12R1_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F12R1_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F12R1_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F12R1_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F12R1_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F12R1_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F12R1_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F12R1_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F12R1_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F12R1_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F12R1_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F12R1_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F12R1_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F12R1_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F12R1_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F12R1_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F12R1_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F12R1_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F12R1_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F12R1_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F12R1_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F12R1_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F12R1_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F12R1_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F12R1_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F12R1_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F12R1_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F12R1_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F12R1_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F13R1 register  ******************/
+#define  CAN_F13R1_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F13R1_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F13R1_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F13R1_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F13R1_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F13R1_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F13R1_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F13R1_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F13R1_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F13R1_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F13R1_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F13R1_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F13R1_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F13R1_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F13R1_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F13R1_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F13R1_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F13R1_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F13R1_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F13R1_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F13R1_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F13R1_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F13R1_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F13R1_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F13R1_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F13R1_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F13R1_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F13R1_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F13R1_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F13R1_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F13R1_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F13R1_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F0R2 register  *******************/
+#define  CAN_F0R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F0R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F0R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F0R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F0R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F0R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F0R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F0R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F0R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F0R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F0R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F0R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F0R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F0R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F0R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F0R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F0R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F0R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F0R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F0R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F0R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F0R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F0R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F0R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F0R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F0R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F0R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F0R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F0R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F0R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F0R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F0R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F1R2 register  *******************/
+#define  CAN_F1R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F1R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F1R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F1R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F1R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F1R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F1R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F1R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F1R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F1R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F1R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F1R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F1R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F1R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F1R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F1R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F1R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F1R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F1R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F1R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F1R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F1R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F1R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F1R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F1R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F1R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F1R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F1R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F1R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F1R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F1R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F1R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F2R2 register  *******************/
+#define  CAN_F2R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F2R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F2R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F2R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F2R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F2R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F2R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F2R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F2R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F2R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F2R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F2R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F2R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F2R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F2R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F2R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F2R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F2R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F2R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F2R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F2R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F2R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F2R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F2R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F2R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F2R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F2R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F2R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F2R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F2R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F2R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F2R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F3R2 register  *******************/
+#define  CAN_F3R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F3R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F3R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F3R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F3R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F3R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F3R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F3R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F3R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F3R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F3R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F3R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F3R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F3R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F3R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F3R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F3R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F3R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F3R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F3R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F3R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F3R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F3R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F3R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F3R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F3R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F3R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F3R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F3R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F3R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F3R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F3R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F4R2 register  *******************/
+#define  CAN_F4R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F4R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F4R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F4R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F4R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F4R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F4R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F4R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F4R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F4R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F4R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F4R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F4R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F4R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F4R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F4R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F4R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F4R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F4R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F4R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F4R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F4R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F4R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F4R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F4R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F4R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F4R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F4R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F4R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F4R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F4R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F4R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F5R2 register  *******************/
+#define  CAN_F5R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F5R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F5R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F5R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F5R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F5R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F5R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F5R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F5R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F5R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F5R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F5R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F5R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F5R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F5R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F5R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F5R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F5R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F5R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F5R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F5R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F5R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F5R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F5R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F5R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F5R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F5R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F5R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F5R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F5R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F5R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F5R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F6R2 register  *******************/
+#define  CAN_F6R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F6R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F6R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F6R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F6R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F6R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F6R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F6R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F6R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F6R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F6R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F6R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F6R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F6R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F6R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F6R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F6R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F6R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F6R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F6R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F6R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F6R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F6R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F6R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F6R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F6R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F6R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F6R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F6R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F6R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F6R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F6R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F7R2 register  *******************/
+#define  CAN_F7R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F7R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F7R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F7R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F7R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F7R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F7R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F7R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F7R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F7R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F7R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F7R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F7R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F7R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F7R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F7R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F7R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F7R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F7R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F7R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F7R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F7R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F7R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F7R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F7R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F7R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F7R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F7R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F7R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F7R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F7R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F7R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F8R2 register  *******************/
+#define  CAN_F8R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F8R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F8R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F8R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F8R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F8R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F8R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F8R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F8R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F8R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F8R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F8R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F8R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F8R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F8R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F8R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F8R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F8R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F8R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F8R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F8R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F8R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F8R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F8R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F8R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F8R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F8R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F8R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F8R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F8R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F8R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F8R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F9R2 register  *******************/
+#define  CAN_F9R2_FB0                        ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F9R2_FB1                        ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F9R2_FB2                        ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F9R2_FB3                        ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F9R2_FB4                        ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F9R2_FB5                        ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F9R2_FB6                        ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F9R2_FB7                        ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F9R2_FB8                        ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F9R2_FB9                        ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F9R2_FB10                       ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F9R2_FB11                       ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F9R2_FB12                       ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F9R2_FB13                       ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F9R2_FB14                       ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F9R2_FB15                       ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F9R2_FB16                       ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F9R2_FB17                       ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F9R2_FB18                       ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F9R2_FB19                       ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F9R2_FB20                       ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F9R2_FB21                       ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F9R2_FB22                       ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F9R2_FB23                       ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F9R2_FB24                       ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F9R2_FB25                       ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F9R2_FB26                       ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F9R2_FB27                       ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F9R2_FB28                       ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F9R2_FB29                       ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F9R2_FB30                       ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F9R2_FB31                       ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F10R2 register  ******************/
+#define  CAN_F10R2_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F10R2_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F10R2_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F10R2_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F10R2_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F10R2_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F10R2_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F10R2_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F10R2_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F10R2_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F10R2_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F10R2_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F10R2_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F10R2_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F10R2_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F10R2_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F10R2_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F10R2_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F10R2_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F10R2_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F10R2_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F10R2_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F10R2_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F10R2_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F10R2_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F10R2_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F10R2_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F10R2_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F10R2_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F10R2_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F10R2_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F10R2_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F11R2 register  ******************/
+#define  CAN_F11R2_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F11R2_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F11R2_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F11R2_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F11R2_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F11R2_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F11R2_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F11R2_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F11R2_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F11R2_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F11R2_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F11R2_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F11R2_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F11R2_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F11R2_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F11R2_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F11R2_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F11R2_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F11R2_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F11R2_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F11R2_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F11R2_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F11R2_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F11R2_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F11R2_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F11R2_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F11R2_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F11R2_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F11R2_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F11R2_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F11R2_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F11R2_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F12R2 register  ******************/
+#define  CAN_F12R2_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F12R2_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F12R2_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F12R2_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F12R2_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F12R2_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F12R2_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F12R2_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F12R2_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F12R2_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F12R2_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F12R2_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F12R2_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F12R2_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F12R2_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F12R2_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F12R2_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F12R2_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F12R2_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F12R2_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F12R2_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F12R2_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F12R2_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F12R2_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F12R2_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F12R2_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F12R2_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F12R2_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F12R2_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F12R2_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F12R2_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F12R2_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/*******************  Bit definition for CAN_F13R2 register  ******************/
+#define  CAN_F13R2_FB0                       ((uint32_t)0x00000001)        /*!<Filter bit 0 */
+#define  CAN_F13R2_FB1                       ((uint32_t)0x00000002)        /*!<Filter bit 1 */
+#define  CAN_F13R2_FB2                       ((uint32_t)0x00000004)        /*!<Filter bit 2 */
+#define  CAN_F13R2_FB3                       ((uint32_t)0x00000008)        /*!<Filter bit 3 */
+#define  CAN_F13R2_FB4                       ((uint32_t)0x00000010)        /*!<Filter bit 4 */
+#define  CAN_F13R2_FB5                       ((uint32_t)0x00000020)        /*!<Filter bit 5 */
+#define  CAN_F13R2_FB6                       ((uint32_t)0x00000040)        /*!<Filter bit 6 */
+#define  CAN_F13R2_FB7                       ((uint32_t)0x00000080)        /*!<Filter bit 7 */
+#define  CAN_F13R2_FB8                       ((uint32_t)0x00000100)        /*!<Filter bit 8 */
+#define  CAN_F13R2_FB9                       ((uint32_t)0x00000200)        /*!<Filter bit 9 */
+#define  CAN_F13R2_FB10                      ((uint32_t)0x00000400)        /*!<Filter bit 10 */
+#define  CAN_F13R2_FB11                      ((uint32_t)0x00000800)        /*!<Filter bit 11 */
+#define  CAN_F13R2_FB12                      ((uint32_t)0x00001000)        /*!<Filter bit 12 */
+#define  CAN_F13R2_FB13                      ((uint32_t)0x00002000)        /*!<Filter bit 13 */
+#define  CAN_F13R2_FB14                      ((uint32_t)0x00004000)        /*!<Filter bit 14 */
+#define  CAN_F13R2_FB15                      ((uint32_t)0x00008000)        /*!<Filter bit 15 */
+#define  CAN_F13R2_FB16                      ((uint32_t)0x00010000)        /*!<Filter bit 16 */
+#define  CAN_F13R2_FB17                      ((uint32_t)0x00020000)        /*!<Filter bit 17 */
+#define  CAN_F13R2_FB18                      ((uint32_t)0x00040000)        /*!<Filter bit 18 */
+#define  CAN_F13R2_FB19                      ((uint32_t)0x00080000)        /*!<Filter bit 19 */
+#define  CAN_F13R2_FB20                      ((uint32_t)0x00100000)        /*!<Filter bit 20 */
+#define  CAN_F13R2_FB21                      ((uint32_t)0x00200000)        /*!<Filter bit 21 */
+#define  CAN_F13R2_FB22                      ((uint32_t)0x00400000)        /*!<Filter bit 22 */
+#define  CAN_F13R2_FB23                      ((uint32_t)0x00800000)        /*!<Filter bit 23 */
+#define  CAN_F13R2_FB24                      ((uint32_t)0x01000000)        /*!<Filter bit 24 */
+#define  CAN_F13R2_FB25                      ((uint32_t)0x02000000)        /*!<Filter bit 25 */
+#define  CAN_F13R2_FB26                      ((uint32_t)0x04000000)        /*!<Filter bit 26 */
+#define  CAN_F13R2_FB27                      ((uint32_t)0x08000000)        /*!<Filter bit 27 */
+#define  CAN_F13R2_FB28                      ((uint32_t)0x10000000)        /*!<Filter bit 28 */
+#define  CAN_F13R2_FB29                      ((uint32_t)0x20000000)        /*!<Filter bit 29 */
+#define  CAN_F13R2_FB30                      ((uint32_t)0x40000000)        /*!<Filter bit 30 */
+#define  CAN_F13R2_FB31                      ((uint32_t)0x80000000)        /*!<Filter bit 31 */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                 HDMI-CEC (CEC)                             */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for CEC_CR register  *********************/
+#define  CEC_CR_CECEN                        ((uint32_t)0x00000001)       /*!< CEC Enable                         */
+#define  CEC_CR_TXSOM                        ((uint32_t)0x00000002)       /*!< CEC Tx Start Of Message            */
+#define  CEC_CR_TXEOM                        ((uint32_t)0x00000004)       /*!< CEC Tx End Of Message              */
+
+/*******************  Bit definition for CEC_CFGR register  *******************/
+#define  CEC_CFGR_SFT                        ((uint32_t)0x00000007)       /*!< CEC Signal Free Time               */
+#define  CEC_CFGR_RXTOL                      ((uint32_t)0x00000008)       /*!< CEC Tolerance                      */
+#define  CEC_CFGR_BRESTP                     ((uint32_t)0x00000010)       /*!< CEC Rx Stop                        */
+#define  CEC_CFGR_BREGEN                     ((uint32_t)0x00000020)       /*!< CEC Bit Rising Error generation    */
+#define  CEC_CFGR_LBPEGEN                    ((uint32_t)0x00000040)       /*!< CEC Long Period Error generation   */
+#define  CEC_CFGR_BRDNOGEN                   ((uint32_t)0x00000080)       /*!< CEC Broadcast no Error generation  */
+#define  CEC_CFGR_SFTOPT                     ((uint32_t)0x00000100)       /*!< CEC Signal Free Time optional      */
+#define  CEC_CFGR_OAR                        ((uint32_t)0x7FFF0000)       /*!< CEC Own Address                    */
+#define  CEC_CFGR_LSTN                       ((uint32_t)0x80000000)       /*!< CEC Listen mode                    */
+
+/*******************  Bit definition for CEC_TXDR register  *******************/
+#define  CEC_TXDR_TXD                        ((uint32_t)0x000000FF)       /*!< CEC Tx Data                        */
+
+/*******************  Bit definition for CEC_RXDR register  *******************/
+#define  CEC_TXDR_RXD                        ((uint32_t)0x000000FF)       /*!< CEC Rx Data                        */
+
+/*******************  Bit definition for CEC_ISR register  ********************/
+#define  CEC_ISR_RXBR                        ((uint32_t)0x00000001)       /*!< CEC Rx-Byte Received                   */
+#define  CEC_ISR_RXEND                       ((uint32_t)0x00000002)       /*!< CEC End Of Reception                   */
+#define  CEC_ISR_RXOVR                       ((uint32_t)0x00000004)       /*!< CEC Rx-Overrun                         */
+#define  CEC_ISR_BRE                         ((uint32_t)0x00000008)       /*!< CEC Rx Bit Rising Error                */
+#define  CEC_ISR_SBPE                        ((uint32_t)0x00000010)       /*!< CEC Rx Short Bit period Error          */
+#define  CEC_ISR_LBPE                        ((uint32_t)0x00000020)       /*!< CEC Rx Long Bit period Error           */
+#define  CEC_ISR_RXACKE                      ((uint32_t)0x00000040)       /*!< CEC Rx Missing Acknowledge             */
+#define  CEC_ISR_ARBLST                      ((uint32_t)0x00000080)       /*!< CEC Arbitration Lost                   */
+#define  CEC_ISR_TXBR                        ((uint32_t)0x00000100)       /*!< CEC Tx Byte Request                    */
+#define  CEC_ISR_TXEND                       ((uint32_t)0x00000200)       /*!< CEC End of Transmission                */
+#define  CEC_ISR_TXUDR                       ((uint32_t)0x00000400)       /*!< CEC Tx-Buffer Underrun                 */
+#define  CEC_ISR_TXERR                       ((uint32_t)0x00000800)       /*!< CEC Tx-Error                           */
+#define  CEC_ISR_TXACKE                      ((uint32_t)0x00001000)       /*!< CEC Tx Missing Acknowledge             */
+
+/*******************  Bit definition for CEC_IER register  ********************/
+#define  CEC_IER_RXBRIE                      ((uint32_t)0x00000001)       /*!< CEC Rx-Byte Received IT Enable         */
+#define  CEC_IER_RXENDIE                     ((uint32_t)0x00000002)       /*!< CEC End Of Reception IT Enable         */
+#define  CEC_IER_RXOVRIE                     ((uint32_t)0x00000004)       /*!< CEC Rx-Overrun IT Enable               */
+#define  CEC_IER_BREIE                       ((uint32_t)0x00000008)       /*!< CEC Rx Bit Rising Error IT Enable      */
+#define  CEC_IER_SBPEIE                      ((uint32_t)0x00000010)       /*!< CEC Rx Short Bit period Error IT Enable*/
+#define  CEC_IER_LBPEIE                      ((uint32_t)0x00000020)       /*!< CEC Rx Long Bit period Error IT Enable */
+#define  CEC_IER_RXACKEIE                    ((uint32_t)0x00000040)       /*!< CEC Rx Missing Acknowledge IT Enable   */
+#define  CEC_IER_ARBLSTIE                    ((uint32_t)0x00000080)       /*!< CEC Arbitration Lost IT Enable         */
+#define  CEC_IER_TXBRIE                      ((uint32_t)0x00000100)       /*!< CEC Tx Byte Request  IT Enable         */
+#define  CEC_IER_TXENDIE                     ((uint32_t)0x00000200)       /*!< CEC End of Transmission IT Enable      */
+#define  CEC_IER_TXUDRIE                     ((uint32_t)0x00000400)       /*!< CEC Tx-Buffer Underrun IT Enable       */
+#define  CEC_IER_TXERRIE                     ((uint32_t)0x00000800)       /*!< CEC Tx-Error IT Enable                 */
+#define  CEC_IER_TXACKEIE                    ((uint32_t)0x00001000)       /*!< CEC Tx Missing Acknowledge IT Enable   */
+
+/******************************************************************************/
+/*                                                                            */
+/*                          CRC calculation unit                              */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for CRC_DR register  *********************/
+#define  CRC_DR_DR                           ((uint32_t)0xFFFFFFFF)     /*!< Data register bits */
+
+/*******************  Bit definition for CRC_IDR register  ********************/
+#define  CRC_IDR_IDR                         ((uint32_t)0x000000FF)     /*!< General-purpose 8-bit data register bits */
+
+/********************  Bit definition for CRC_CR register  ********************/
+#define  CRC_CR_RESET                        ((uint32_t)0x00000001)     /*!< RESET the CRC computation unit bit */
+#define  CRC_CR_POLYSIZE                     ((uint32_t)0x00000018)     /*!< Polynomial size bits               */
+#define  CRC_CR_POLYSIZE_0                   ((uint32_t)0x00000008)     /*!< Polynomial size bit 0              */
+#define  CRC_CR_POLYSIZE_1                   ((uint32_t)0x00000010)     /*!< Polynomial size bit 1              */
+#define  CRC_CR_REV_IN                       ((uint32_t)0x00000060)     /*!< REV_IN Reverse Input Data bits     */
+#define  CRC_CR_REV_IN_0                     ((uint32_t)0x00000020)     /*!< Bit 0 */
+#define  CRC_CR_REV_IN_1                     ((uint32_t)0x00000040)     /*!< Bit 1 */
+#define  CRC_CR_REV_OUT                      ((uint32_t)0x00000080)     /*!< REV_OUT Reverse Output Data bits   */
+
+/*******************  Bit definition for CRC_INIT register  *******************/
+#define  CRC_INIT_INIT                       ((uint32_t)0xFFFFFFFF)     /*!< Initial CRC value bits         */
+
+/*******************  Bit definition for CRC_POL register  ********************/
+#define  CRC_POL_POL                         ((uint32_t)0xFFFFFFFF)     /*!< Coefficients of the polynomial */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                      Digital to Analog Converter                           */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for DAC_CR register  ********************/
+#define  DAC_CR_EN1                          ((uint32_t)0x00000001)        /*!<DAC channel1 enable                         */
+#define  DAC_CR_BOFF1                        ((uint32_t)0x00000002)        /*!<DAC channel1 output buffer disable          */
+#define  DAC_CR_TEN1                         ((uint32_t)0x00000004)        /*!<DAC channel1 Trigger enable                 */
+
+#define  DAC_CR_TSEL1                        ((uint32_t)0x00000038)        /*!<TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define  DAC_CR_TSEL1_0                      ((uint32_t)0x00000008)        /*!<Bit 0 */
+#define  DAC_CR_TSEL1_1                      ((uint32_t)0x00000010)        /*!<Bit 1 */
+#define  DAC_CR_TSEL1_2                      ((uint32_t)0x00000020)        /*!<Bit 2 */
+
+#define  DAC_CR_WAVE1                        ((uint32_t)0x000000C0)        /*!<WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define  DAC_CR_WAVE1_0                      ((uint32_t)0x00000040)        /*!<Bit 0 */
+#define  DAC_CR_WAVE1_1                      ((uint32_t)0x00000080)        /*!<Bit 1 */
+
+#define  DAC_CR_MAMP1                        ((uint32_t)0x00000F00)        /*!<MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define  DAC_CR_MAMP1_0                      ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  DAC_CR_MAMP1_1                      ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  DAC_CR_MAMP1_2                      ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  DAC_CR_MAMP1_3                      ((uint32_t)0x00000800)        /*!<Bit 3 */
+
+#define  DAC_CR_DMAEN1                       ((uint32_t)0x00001000)        /*!<DAC channel1 DMA enable                     */
+#define  DAC_CR_EN2                          ((uint32_t)0x00010000)        /*!<DAC channel2 enable                         */
+#define  DAC_CR_BOFF2                        ((uint32_t)0x00020000)        /*!<DAC channel2 output buffer disable          */
+#define  DAC_CR_TEN2                         ((uint32_t)0x00040000)        /*!<DAC channel2 Trigger enable                 */
+
+#define  DAC_CR_TSEL2                        ((uint32_t)0x00380000)        /*!<TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define  DAC_CR_TSEL2_0                      ((uint32_t)0x00080000)        /*!<Bit 0 */
+#define  DAC_CR_TSEL2_1                      ((uint32_t)0x00100000)        /*!<Bit 1 */
+#define  DAC_CR_TSEL2_2                      ((uint32_t)0x00200000)        /*!<Bit 2 */
+
+#define  DAC_CR_WAVE2                        ((uint32_t)0x00C00000)        /*!<WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define  DAC_CR_WAVE2_0                      ((uint32_t)0x00400000)        /*!<Bit 0 */
+#define  DAC_CR_WAVE2_1                      ((uint32_t)0x00800000)        /*!<Bit 1 */
+
+#define  DAC_CR_MAMP2                        ((uint32_t)0x0F000000)        /*!<MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define  DAC_CR_MAMP2_0                      ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  DAC_CR_MAMP2_1                      ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  DAC_CR_MAMP2_2                      ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  DAC_CR_MAMP2_3                      ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  DAC_CR_DMAEN2                       ((uint32_t)0x10000000)        /*!<DAC channel2 DMA enabled */
+
+/*****************  Bit definition for DAC_SWTRIGR register  ******************/
+#define  DAC_SWTRIGR_SWTRIG1                 ((uint32_t)0x01)               /*!<DAC channel1 software trigger */
+#define  DAC_SWTRIGR_SWTRIG2                 ((uint32_t)0x02)               /*!<DAC channel2 software trigger */
+
+/*****************  Bit definition for DAC_DHR12R1 register  ******************/
+#define  DAC_DHR12R1_DACC1DHR                ((uint32_t)0x0FFF)            /*!<DAC channel1 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12L1 register  ******************/
+#define  DAC_DHR12L1_DACC1DHR                ((uint32_t)0xFFF0)            /*!<DAC channel1 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8R1 register  ******************/
+#define  DAC_DHR8R1_DACC1DHR                 ((uint32_t)0xFF)               /*!<DAC channel1 8-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12R2 register  ******************/
+#define  DAC_DHR12R2_DACC2DHR                ((uint32_t)0x0FFF)            /*!<DAC channel2 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12L2 register  ******************/
+#define  DAC_DHR12L2_DACC2DHR                ((uint32_t)0xFFF0)            /*!<DAC channel2 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8R2 register  ******************/
+#define  DAC_DHR8R2_DACC2DHR                 ((uint32_t)0xFF)               /*!<DAC channel2 8-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12RD register  ******************/
+#define  DAC_DHR12RD_DACC1DHR                ((uint32_t)0x00000FFF)        /*!<DAC channel1 12-bit Right aligned data */
+#define  DAC_DHR12RD_DACC2DHR                ((uint32_t)0x0FFF0000)        /*!<DAC channel2 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12LD register  ******************/
+#define  DAC_DHR12LD_DACC1DHR                ((uint32_t)0x0000FFF0)        /*!<DAC channel1 12-bit Left aligned data */
+#define  DAC_DHR12LD_DACC2DHR                ((uint32_t)0xFFF00000)        /*!<DAC channel2 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8RD register  ******************/
+#define  DAC_DHR8RD_DACC1DHR                 ((uint32_t)0x00FF)            /*!<DAC channel1 8-bit Right aligned data */
+#define  DAC_DHR8RD_DACC2DHR                 ((uint32_t)0xFF00)            /*!<DAC channel2 8-bit Right aligned data */
+
+/*******************  Bit definition for DAC_DOR1 register  *******************/
+#define  DAC_DOR1_DACC1DOR                   ((uint32_t)0x0FFF)            /*!<DAC channel1 data output */
+
+/*******************  Bit definition for DAC_DOR2 register  *******************/
+#define  DAC_DOR2_DACC2DOR                   ((uint32_t)0x0FFF)            /*!<DAC channel2 data output */
+
+/********************  Bit definition for DAC_SR register  ********************/
+#define  DAC_SR_DMAUDR1                      ((uint32_t)0x00002000)        /*!<DAC channel1 DMA underrun flag */
+#define  DAC_SR_DMAUDR2                      ((uint32_t)0x20000000)        /*!<DAC channel2 DMA underrun flag */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                                 Debug MCU                                  */
+/*                                                                            */
+/******************************************************************************/
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    DCMI                                    */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bits definition for DCMI_CR register  ******************/
+#define DCMI_CR_CAPTURE                      ((uint32_t)0x00000001)
+#define DCMI_CR_CM                           ((uint32_t)0x00000002)
+#define DCMI_CR_CROP                         ((uint32_t)0x00000004)
+#define DCMI_CR_JPEG                         ((uint32_t)0x00000008)
+#define DCMI_CR_ESS                          ((uint32_t)0x00000010)
+#define DCMI_CR_PCKPOL                       ((uint32_t)0x00000020)
+#define DCMI_CR_HSPOL                        ((uint32_t)0x00000040)
+#define DCMI_CR_VSPOL                        ((uint32_t)0x00000080)
+#define DCMI_CR_FCRC_0                       ((uint32_t)0x00000100)
+#define DCMI_CR_FCRC_1                       ((uint32_t)0x00000200)
+#define DCMI_CR_EDM_0                        ((uint32_t)0x00000400)
+#define DCMI_CR_EDM_1                        ((uint32_t)0x00000800)
+#define DCMI_CR_CRE                          ((uint32_t)0x00001000)
+#define DCMI_CR_ENABLE                       ((uint32_t)0x00004000)
+#define DCMI_CR_BSM                          ((uint32_t)0x00030000)
+#define DCMI_CR_BSM_0                        ((uint32_t)0x00010000)
+#define DCMI_CR_BSM_1                        ((uint32_t)0x00020000)
+#define DCMI_CR_OEBS                         ((uint32_t)0x00040000)
+#define DCMI_CR_LSM                          ((uint32_t)0x00080000)
+#define DCMI_CR_OELS                         ((uint32_t)0x00100000)
+
+/********************  Bits definition for DCMI_SR register  ******************/
+#define DCMI_SR_HSYNC                        ((uint32_t)0x00000001)
+#define DCMI_SR_VSYNC                        ((uint32_t)0x00000002)
+#define DCMI_SR_FNE                          ((uint32_t)0x00000004)
+
+/********************  Bits definition for DCMI_RISR register  ****************/
+#define DCMI_RISR_FRAME_RIS                  ((uint32_t)0x00000001)
+#define DCMI_RISR_OVF_RIS                    ((uint32_t)0x00000002)
+#define DCMI_RISR_ERR_RIS                    ((uint32_t)0x00000004)
+#define DCMI_RISR_VSYNC_RIS                  ((uint32_t)0x00000008)
+#define DCMI_RISR_LINE_RIS                   ((uint32_t)0x00000010)
+
+/********************  Bits definition for DCMI_IER register  *****************/
+#define DCMI_IER_FRAME_IE                    ((uint32_t)0x00000001)
+#define DCMI_IER_OVF_IE                      ((uint32_t)0x00000002)
+#define DCMI_IER_ERR_IE                      ((uint32_t)0x00000004)
+#define DCMI_IER_VSYNC_IE                    ((uint32_t)0x00000008)
+#define DCMI_IER_LINE_IE                     ((uint32_t)0x00000010)
+
+/********************  Bits definition for DCMI_MISR register  ****************/
+#define DCMI_MISR_FRAME_MIS                  ((uint32_t)0x00000001)
+#define DCMI_MISR_OVF_MIS                    ((uint32_t)0x00000002)
+#define DCMI_MISR_ERR_MIS                    ((uint32_t)0x00000004)
+#define DCMI_MISR_VSYNC_MIS                  ((uint32_t)0x00000008)
+#define DCMI_MISR_LINE_MIS                   ((uint32_t)0x00000010)
+
+/********************  Bits definition for DCMI_ICR register  *****************/
+#define DCMI_ICR_FRAME_ISC                   ((uint32_t)0x00000001)
+#define DCMI_ICR_OVF_ISC                     ((uint32_t)0x00000002)
+#define DCMI_ICR_ERR_ISC                     ((uint32_t)0x00000004)
+#define DCMI_ICR_VSYNC_ISC                   ((uint32_t)0x00000008)
+#define DCMI_ICR_LINE_ISC                    ((uint32_t)0x00000010)
+
+/******************************************************************************/
+/*                                                                            */
+/*                             DMA Controller                                 */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bits definition for DMA_SxCR register  *****************/ 
+#define DMA_SxCR_CHSEL                       ((uint32_t)0x0E000000)
+#define DMA_SxCR_CHSEL_0                     ((uint32_t)0x02000000)
+#define DMA_SxCR_CHSEL_1                     ((uint32_t)0x04000000)
+#define DMA_SxCR_CHSEL_2                     ((uint32_t)0x08000000)
+#define DMA_SxCR_MBURST                      ((uint32_t)0x01800000)
+#define DMA_SxCR_MBURST_0                    ((uint32_t)0x00800000)
+#define DMA_SxCR_MBURST_1                    ((uint32_t)0x01000000)
+#define DMA_SxCR_PBURST                      ((uint32_t)0x00600000)
+#define DMA_SxCR_PBURST_0                    ((uint32_t)0x00200000)
+#define DMA_SxCR_PBURST_1                    ((uint32_t)0x00400000)
+#define DMA_SxCR_ACK                         ((uint32_t)0x00100000)
+#define DMA_SxCR_CT                          ((uint32_t)0x00080000)  
+#define DMA_SxCR_DBM                         ((uint32_t)0x00040000)
+#define DMA_SxCR_PL                          ((uint32_t)0x00030000)
+#define DMA_SxCR_PL_0                        ((uint32_t)0x00010000)
+#define DMA_SxCR_PL_1                        ((uint32_t)0x00020000)
+#define DMA_SxCR_PINCOS                      ((uint32_t)0x00008000)
+#define DMA_SxCR_MSIZE                       ((uint32_t)0x00006000)
+#define DMA_SxCR_MSIZE_0                     ((uint32_t)0x00002000)
+#define DMA_SxCR_MSIZE_1                     ((uint32_t)0x00004000)
+#define DMA_SxCR_PSIZE                       ((uint32_t)0x00001800)
+#define DMA_SxCR_PSIZE_0                     ((uint32_t)0x00000800)
+#define DMA_SxCR_PSIZE_1                     ((uint32_t)0x00001000)
+#define DMA_SxCR_MINC                        ((uint32_t)0x00000400)
+#define DMA_SxCR_PINC                        ((uint32_t)0x00000200)
+#define DMA_SxCR_CIRC                        ((uint32_t)0x00000100)
+#define DMA_SxCR_DIR                         ((uint32_t)0x000000C0)
+#define DMA_SxCR_DIR_0                       ((uint32_t)0x00000040)
+#define DMA_SxCR_DIR_1                       ((uint32_t)0x00000080)
+#define DMA_SxCR_PFCTRL                      ((uint32_t)0x00000020)
+#define DMA_SxCR_TCIE                        ((uint32_t)0x00000010)
+#define DMA_SxCR_HTIE                        ((uint32_t)0x00000008)
+#define DMA_SxCR_TEIE                        ((uint32_t)0x00000004)
+#define DMA_SxCR_DMEIE                       ((uint32_t)0x00000002)
+#define DMA_SxCR_EN                          ((uint32_t)0x00000001)
+
+/********************  Bits definition for DMA_SxCNDTR register  **************/
+#define DMA_SxNDT                            ((uint32_t)0x0000FFFF)
+#define DMA_SxNDT_0                          ((uint32_t)0x00000001)
+#define DMA_SxNDT_1                          ((uint32_t)0x00000002)
+#define DMA_SxNDT_2                          ((uint32_t)0x00000004)
+#define DMA_SxNDT_3                          ((uint32_t)0x00000008)
+#define DMA_SxNDT_4                          ((uint32_t)0x00000010)
+#define DMA_SxNDT_5                          ((uint32_t)0x00000020)
+#define DMA_SxNDT_6                          ((uint32_t)0x00000040)
+#define DMA_SxNDT_7                          ((uint32_t)0x00000080)
+#define DMA_SxNDT_8                          ((uint32_t)0x00000100)
+#define DMA_SxNDT_9                          ((uint32_t)0x00000200)
+#define DMA_SxNDT_10                         ((uint32_t)0x00000400)
+#define DMA_SxNDT_11                         ((uint32_t)0x00000800)
+#define DMA_SxNDT_12                         ((uint32_t)0x00001000)
+#define DMA_SxNDT_13                         ((uint32_t)0x00002000)
+#define DMA_SxNDT_14                         ((uint32_t)0x00004000)
+#define DMA_SxNDT_15                         ((uint32_t)0x00008000)
+
+/********************  Bits definition for DMA_SxFCR register  ****************/ 
+#define DMA_SxFCR_FEIE                       ((uint32_t)0x00000080)
+#define DMA_SxFCR_FS                         ((uint32_t)0x00000038)
+#define DMA_SxFCR_FS_0                       ((uint32_t)0x00000008)
+#define DMA_SxFCR_FS_1                       ((uint32_t)0x00000010)
+#define DMA_SxFCR_FS_2                       ((uint32_t)0x00000020)
+#define DMA_SxFCR_DMDIS                      ((uint32_t)0x00000004)
+#define DMA_SxFCR_FTH                        ((uint32_t)0x00000003)
+#define DMA_SxFCR_FTH_0                      ((uint32_t)0x00000001)
+#define DMA_SxFCR_FTH_1                      ((uint32_t)0x00000002)
+
+/********************  Bits definition for DMA_LISR register  *****************/ 
+#define DMA_LISR_TCIF3                       ((uint32_t)0x08000000)
+#define DMA_LISR_HTIF3                       ((uint32_t)0x04000000)
+#define DMA_LISR_TEIF3                       ((uint32_t)0x02000000)
+#define DMA_LISR_DMEIF3                      ((uint32_t)0x01000000)
+#define DMA_LISR_FEIF3                       ((uint32_t)0x00400000)
+#define DMA_LISR_TCIF2                       ((uint32_t)0x00200000)
+#define DMA_LISR_HTIF2                       ((uint32_t)0x00100000)
+#define DMA_LISR_TEIF2                       ((uint32_t)0x00080000)
+#define DMA_LISR_DMEIF2                      ((uint32_t)0x00040000)
+#define DMA_LISR_FEIF2                       ((uint32_t)0x00010000)
+#define DMA_LISR_TCIF1                       ((uint32_t)0x00000800)
+#define DMA_LISR_HTIF1                       ((uint32_t)0x00000400)
+#define DMA_LISR_TEIF1                       ((uint32_t)0x00000200)
+#define DMA_LISR_DMEIF1                      ((uint32_t)0x00000100)
+#define DMA_LISR_FEIF1                       ((uint32_t)0x00000040)
+#define DMA_LISR_TCIF0                       ((uint32_t)0x00000020)
+#define DMA_LISR_HTIF0                       ((uint32_t)0x00000010)
+#define DMA_LISR_TEIF0                       ((uint32_t)0x00000008)
+#define DMA_LISR_DMEIF0                      ((uint32_t)0x00000004)
+#define DMA_LISR_FEIF0                       ((uint32_t)0x00000001)
+
+/********************  Bits definition for DMA_HISR register  *****************/ 
+#define DMA_HISR_TCIF7                       ((uint32_t)0x08000000)
+#define DMA_HISR_HTIF7                       ((uint32_t)0x04000000)
+#define DMA_HISR_TEIF7                       ((uint32_t)0x02000000)
+#define DMA_HISR_DMEIF7                      ((uint32_t)0x01000000)
+#define DMA_HISR_FEIF7                       ((uint32_t)0x00400000)
+#define DMA_HISR_TCIF6                       ((uint32_t)0x00200000)
+#define DMA_HISR_HTIF6                       ((uint32_t)0x00100000)
+#define DMA_HISR_TEIF6                       ((uint32_t)0x00080000)
+#define DMA_HISR_DMEIF6                      ((uint32_t)0x00040000)
+#define DMA_HISR_FEIF6                       ((uint32_t)0x00010000)
+#define DMA_HISR_TCIF5                       ((uint32_t)0x00000800)
+#define DMA_HISR_HTIF5                       ((uint32_t)0x00000400)
+#define DMA_HISR_TEIF5                       ((uint32_t)0x00000200)
+#define DMA_HISR_DMEIF5                      ((uint32_t)0x00000100)
+#define DMA_HISR_FEIF5                       ((uint32_t)0x00000040)
+#define DMA_HISR_TCIF4                       ((uint32_t)0x00000020)
+#define DMA_HISR_HTIF4                       ((uint32_t)0x00000010)
+#define DMA_HISR_TEIF4                       ((uint32_t)0x00000008)
+#define DMA_HISR_DMEIF4                      ((uint32_t)0x00000004)
+#define DMA_HISR_FEIF4                       ((uint32_t)0x00000001)
+
+/********************  Bits definition for DMA_LIFCR register  ****************/ 
+#define DMA_LIFCR_CTCIF3                     ((uint32_t)0x08000000)
+#define DMA_LIFCR_CHTIF3                     ((uint32_t)0x04000000)
+#define DMA_LIFCR_CTEIF3                     ((uint32_t)0x02000000)
+#define DMA_LIFCR_CDMEIF3                    ((uint32_t)0x01000000)
+#define DMA_LIFCR_CFEIF3                     ((uint32_t)0x00400000)
+#define DMA_LIFCR_CTCIF2                     ((uint32_t)0x00200000)
+#define DMA_LIFCR_CHTIF2                     ((uint32_t)0x00100000)
+#define DMA_LIFCR_CTEIF2                     ((uint32_t)0x00080000)
+#define DMA_LIFCR_CDMEIF2                    ((uint32_t)0x00040000)
+#define DMA_LIFCR_CFEIF2                     ((uint32_t)0x00010000)
+#define DMA_LIFCR_CTCIF1                     ((uint32_t)0x00000800)
+#define DMA_LIFCR_CHTIF1                     ((uint32_t)0x00000400)
+#define DMA_LIFCR_CTEIF1                     ((uint32_t)0x00000200)
+#define DMA_LIFCR_CDMEIF1                    ((uint32_t)0x00000100)
+#define DMA_LIFCR_CFEIF1                     ((uint32_t)0x00000040)
+#define DMA_LIFCR_CTCIF0                     ((uint32_t)0x00000020)
+#define DMA_LIFCR_CHTIF0                     ((uint32_t)0x00000010)
+#define DMA_LIFCR_CTEIF0                     ((uint32_t)0x00000008)
+#define DMA_LIFCR_CDMEIF0                    ((uint32_t)0x00000004)
+#define DMA_LIFCR_CFEIF0                     ((uint32_t)0x00000001)
+
+/********************  Bits definition for DMA_HIFCR  register  ****************/ 
+#define DMA_HIFCR_CTCIF7                     ((uint32_t)0x08000000)
+#define DMA_HIFCR_CHTIF7                     ((uint32_t)0x04000000)
+#define DMA_HIFCR_CTEIF7                     ((uint32_t)0x02000000)
+#define DMA_HIFCR_CDMEIF7                    ((uint32_t)0x01000000)
+#define DMA_HIFCR_CFEIF7                     ((uint32_t)0x00400000)
+#define DMA_HIFCR_CTCIF6                     ((uint32_t)0x00200000)
+#define DMA_HIFCR_CHTIF6                     ((uint32_t)0x00100000)
+#define DMA_HIFCR_CTEIF6                     ((uint32_t)0x00080000)
+#define DMA_HIFCR_CDMEIF6                    ((uint32_t)0x00040000)
+#define DMA_HIFCR_CFEIF6                     ((uint32_t)0x00010000)
+#define DMA_HIFCR_CTCIF5                     ((uint32_t)0x00000800)
+#define DMA_HIFCR_CHTIF5                     ((uint32_t)0x00000400)
+#define DMA_HIFCR_CTEIF5                     ((uint32_t)0x00000200)
+#define DMA_HIFCR_CDMEIF5                    ((uint32_t)0x00000100)
+#define DMA_HIFCR_CFEIF5                     ((uint32_t)0x00000040)
+#define DMA_HIFCR_CTCIF4                     ((uint32_t)0x00000020)
+#define DMA_HIFCR_CHTIF4                     ((uint32_t)0x00000010)
+#define DMA_HIFCR_CTEIF4                     ((uint32_t)0x00000008)
+#define DMA_HIFCR_CDMEIF4                    ((uint32_t)0x00000004)
+#define DMA_HIFCR_CFEIF4                     ((uint32_t)0x00000001)
+
+/******************************************************************************/
+/*                                                                            */
+/*                         AHB Master DMA2D Controller (DMA2D)                */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for DMA2D_CR register  ******************/
+
+#define DMA2D_CR_START                     ((uint32_t)0x00000001)               /*!< Start transfer                          */
+#define DMA2D_CR_SUSP                      ((uint32_t)0x00000002)               /*!< Suspend transfer                        */
+#define DMA2D_CR_ABORT                     ((uint32_t)0x00000004)               /*!< Abort transfer                          */
+#define DMA2D_CR_TEIE                      ((uint32_t)0x00000100)               /*!< Transfer Error Interrupt Enable         */
+#define DMA2D_CR_TCIE                      ((uint32_t)0x00000200)               /*!< Transfer Complete Interrupt Enable      */
+#define DMA2D_CR_TWIE                      ((uint32_t)0x00000400)               /*!< Transfer Watermark Interrupt Enable     */
+#define DMA2D_CR_CAEIE                     ((uint32_t)0x00000800)               /*!< CLUT Access Error Interrupt Enable      */
+#define DMA2D_CR_CTCIE                     ((uint32_t)0x00001000)               /*!< CLUT Transfer Complete Interrupt Enable */
+#define DMA2D_CR_CEIE                      ((uint32_t)0x00002000)               /*!< Configuration Error Interrupt Enable    */
+#define DMA2D_CR_MODE                      ((uint32_t)0x00030000)               /*!< DMA2D Mode                              */
+
+/********************  Bit definition for DMA2D_ISR register  *****************/
+
+#define DMA2D_ISR_TEIF                     ((uint32_t)0x00000001)               /*!< Transfer Error Interrupt Flag         */
+#define DMA2D_ISR_TCIF                     ((uint32_t)0x00000002)               /*!< Transfer Complete Interrupt Flag      */
+#define DMA2D_ISR_TWIF                     ((uint32_t)0x00000004)               /*!< Transfer Watermark Interrupt Flag     */
+#define DMA2D_ISR_CAEIF                    ((uint32_t)0x00000008)               /*!< CLUT Access Error Interrupt Flag      */
+#define DMA2D_ISR_CTCIF                    ((uint32_t)0x00000010)               /*!< CLUT Transfer Complete Interrupt Flag */
+#define DMA2D_ISR_CEIF                     ((uint32_t)0x00000020)               /*!< Configuration Error Interrupt Flag    */
+
+/********************  Bit definition for DMA2D_IFSR register  ****************/
+
+#define DMA2D_IFSR_CTEIF                   ((uint32_t)0x00000001)               /*!< Clears Transfer Error Interrupt Flag         */
+#define DMA2D_IFSR_CTCIF                   ((uint32_t)0x00000002)               /*!< Clears Transfer Complete Interrupt Flag      */
+#define DMA2D_IFSR_CTWIF                   ((uint32_t)0x00000004)               /*!< Clears Transfer Watermark Interrupt Flag     */
+#define DMA2D_IFSR_CCAEIF                  ((uint32_t)0x00000008)               /*!< Clears CLUT Access Error Interrupt Flag      */
+#define DMA2D_IFSR_CCTCIF                  ((uint32_t)0x00000010)               /*!< Clears CLUT Transfer Complete Interrupt Flag */
+#define DMA2D_IFSR_CCEIF                   ((uint32_t)0x00000020)               /*!< Clears Configuration Error Interrupt Flag    */
+
+/********************  Bit definition for DMA2D_FGMAR register  ***************/
+
+#define DMA2D_FGMAR_MA                     ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_FGOR register  ****************/
+
+#define DMA2D_FGOR_LO                      ((uint32_t)0x00003FFF)               /*!< Line Offset */
+
+/********************  Bit definition for DMA2D_BGMAR register  ***************/
+
+#define DMA2D_BGMAR_MA                     ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_BGOR register  ****************/
+
+#define DMA2D_BGOR_LO                      ((uint32_t)0x00003FFF)               /*!< Line Offset */
+
+/********************  Bit definition for DMA2D_FGPFCCR register  *************/
+
+#define DMA2D_FGPFCCR_CM                   ((uint32_t)0x0000000F)               /*!< Color mode      */
+#define DMA2D_FGPFCCR_CCM                  ((uint32_t)0x00000010)               /*!< CLUT Color mode */
+#define DMA2D_FGPFCCR_START                ((uint32_t)0x00000020)               /*!< Start           */
+#define DMA2D_FGPFCCR_CS                   ((uint32_t)0x0000FF00)               /*!< CLUT size       */
+#define DMA2D_FGPFCCR_AM                   ((uint32_t)0x00030000)               /*!< Alpha mode      */
+#define DMA2D_FGPFCCR_ALPHA                ((uint32_t)0xFF000000)               /*!< Alpha value     */
+
+/********************  Bit definition for DMA2D_FGCOLR register  **************/
+
+#define DMA2D_FGCOLR_BLUE                  ((uint32_t)0x000000FF)               /*!< Blue Value  */
+#define DMA2D_FGCOLR_GREEN                 ((uint32_t)0x0000FF00)               /*!< Green Value */
+#define DMA2D_FGCOLR_RED                   ((uint32_t)0x00FF0000)               /*!< Red Value   */   
+
+/********************  Bit definition for DMA2D_BGPFCCR register  *************/
+
+#define DMA2D_BGPFCCR_CM                   ((uint32_t)0x0000000F)               /*!< Color mode      */
+#define DMA2D_BGPFCCR_CCM                  ((uint32_t)0x00000010)               /*!< CLUT Color mode */
+#define DMA2D_BGPFCCR_START                ((uint32_t)0x00000020)               /*!< Start           */
+#define DMA2D_BGPFCCR_CS                   ((uint32_t)0x0000FF00)               /*!< CLUT size       */
+#define DMA2D_BGPFCCR_AM                   ((uint32_t)0x00030000)               /*!< Alpha Mode      */
+#define DMA2D_BGPFCCR_ALPHA                ((uint32_t)0xFF000000)               /*!< Alpha value     */
+
+/********************  Bit definition for DMA2D_BGCOLR register  **************/
+
+#define DMA2D_BGCOLR_BLUE                  ((uint32_t)0x000000FF)               /*!< Blue Value  */
+#define DMA2D_BGCOLR_GREEN                 ((uint32_t)0x0000FF00)               /*!< Green Value */
+#define DMA2D_BGCOLR_RED                   ((uint32_t)0x00FF0000)               /*!< Red Value   */
+
+/********************  Bit definition for DMA2D_FGCMAR register  **************/
+
+#define DMA2D_FGCMAR_MA                    ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_BGCMAR register  **************/
+
+#define DMA2D_BGCMAR_MA                    ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_OPFCCR register  **************/
+
+#define DMA2D_OPFCCR_CM                    ((uint32_t)0x00000007)               /*!< Color mode */
+
+/********************  Bit definition for DMA2D_OCOLR register  ***************/
+
+/*!<Mode_ARGB8888/RGB888 */
+
+#define DMA2D_OCOLR_BLUE_1                 ((uint32_t)0x000000FF)               /*!< BLUE Value          */
+#define DMA2D_OCOLR_GREEN_1                ((uint32_t)0x0000FF00)               /*!< GREEN Value         */
+#define DMA2D_OCOLR_RED_1                  ((uint32_t)0x00FF0000)               /*!< Red Value           */
+#define DMA2D_OCOLR_ALPHA_1                ((uint32_t)0xFF000000)               /*!< Alpha Channel Value */
+
+/*!<Mode_RGB565 */
+#define DMA2D_OCOLR_BLUE_2                 ((uint32_t)0x0000001F)               /*!< BLUE Value   */
+#define DMA2D_OCOLR_GREEN_2                ((uint32_t)0x000007E0)               /*!< GREEN Value  */
+#define DMA2D_OCOLR_RED_2                  ((uint32_t)0x0000F800)               /*!< Red Value    */
+
+/*!<Mode_ARGB1555 */
+#define DMA2D_OCOLR_BLUE_3                 ((uint32_t)0x0000001F)               /*!< BLUE Value          */
+#define DMA2D_OCOLR_GREEN_3                ((uint32_t)0x000003E0)               /*!< GREEN Value         */
+#define DMA2D_OCOLR_RED_3                  ((uint32_t)0x00007C00)               /*!< Red Value           */
+#define DMA2D_OCOLR_ALPHA_3                ((uint32_t)0x00008000)               /*!< Alpha Channel Value */
+
+/*!<Mode_ARGB4444 */
+#define DMA2D_OCOLR_BLUE_4                 ((uint32_t)0x0000000F)               /*!< BLUE Value          */
+#define DMA2D_OCOLR_GREEN_4                ((uint32_t)0x000000F0)               /*!< GREEN Value         */
+#define DMA2D_OCOLR_RED_4                  ((uint32_t)0x00000F00)               /*!< Red Value           */
+#define DMA2D_OCOLR_ALPHA_4                ((uint32_t)0x0000F000)               /*!< Alpha Channel Value */
+
+/********************  Bit definition for DMA2D_OMAR register  ****************/
+
+#define DMA2D_OMAR_MA                      ((uint32_t)0xFFFFFFFF)               /*!< Memory Address */
+
+/********************  Bit definition for DMA2D_OOR register  *****************/
+
+#define DMA2D_OOR_LO                       ((uint32_t)0x00003FFF)               /*!< Line Offset */
+
+/********************  Bit definition for DMA2D_NLR register  *****************/
+
+#define DMA2D_NLR_NL                       ((uint32_t)0x0000FFFF)               /*!< Number of Lines */
+#define DMA2D_NLR_PL                       ((uint32_t)0x3FFF0000)               /*!< Pixel per Lines */
+
+/********************  Bit definition for DMA2D_LWR register  *****************/
+
+#define DMA2D_LWR_LW                       ((uint32_t)0x0000FFFF)               /*!< Line Watermark */
+
+/********************  Bit definition for DMA2D_AMTCR register  ***************/
+
+#define DMA2D_AMTCR_EN                     ((uint32_t)0x00000001)               /*!< Enable    */
+#define DMA2D_AMTCR_DT                     ((uint32_t)0x0000FF00)               /*!< Dead Time */
+
+
+
+/********************  Bit definition for DMA2D_FGCLUT register  **************/
+                                                                     
+/********************  Bit definition for DMA2D_BGCLUT register  **************/
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                    External Interrupt/Event Controller                     */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for EXTI_IMR register  *******************/
+#define  EXTI_IMR_MR0                        ((uint32_t)0x00000001)        /*!< Interrupt Mask on line 0 */
+#define  EXTI_IMR_MR1                        ((uint32_t)0x00000002)        /*!< Interrupt Mask on line 1 */
+#define  EXTI_IMR_MR2                        ((uint32_t)0x00000004)        /*!< Interrupt Mask on line 2 */
+#define  EXTI_IMR_MR3                        ((uint32_t)0x00000008)        /*!< Interrupt Mask on line 3 */
+#define  EXTI_IMR_MR4                        ((uint32_t)0x00000010)        /*!< Interrupt Mask on line 4 */
+#define  EXTI_IMR_MR5                        ((uint32_t)0x00000020)        /*!< Interrupt Mask on line 5 */
+#define  EXTI_IMR_MR6                        ((uint32_t)0x00000040)        /*!< Interrupt Mask on line 6 */
+#define  EXTI_IMR_MR7                        ((uint32_t)0x00000080)        /*!< Interrupt Mask on line 7 */
+#define  EXTI_IMR_MR8                        ((uint32_t)0x00000100)        /*!< Interrupt Mask on line 8 */
+#define  EXTI_IMR_MR9                        ((uint32_t)0x00000200)        /*!< Interrupt Mask on line 9 */
+#define  EXTI_IMR_MR10                       ((uint32_t)0x00000400)        /*!< Interrupt Mask on line 10 */
+#define  EXTI_IMR_MR11                       ((uint32_t)0x00000800)        /*!< Interrupt Mask on line 11 */
+#define  EXTI_IMR_MR12                       ((uint32_t)0x00001000)        /*!< Interrupt Mask on line 12 */
+#define  EXTI_IMR_MR13                       ((uint32_t)0x00002000)        /*!< Interrupt Mask on line 13 */
+#define  EXTI_IMR_MR14                       ((uint32_t)0x00004000)        /*!< Interrupt Mask on line 14 */
+#define  EXTI_IMR_MR15                       ((uint32_t)0x00008000)        /*!< Interrupt Mask on line 15 */
+#define  EXTI_IMR_MR16                       ((uint32_t)0x00010000)        /*!< Interrupt Mask on line 16 */
+#define  EXTI_IMR_MR17                       ((uint32_t)0x00020000)        /*!< Interrupt Mask on line 17 */
+#define  EXTI_IMR_MR18                       ((uint32_t)0x00040000)        /*!< Interrupt Mask on line 18 */
+#define  EXTI_IMR_MR19                       ((uint32_t)0x00080000)        /*!< Interrupt Mask on line 19 */
+#define  EXTI_IMR_MR20                       ((uint32_t)0x00100000)        /*!< Interrupt Mask on line 20 */
+#define  EXTI_IMR_MR21                       ((uint32_t)0x00200000)        /*!< Interrupt Mask on line 21 */
+#define  EXTI_IMR_MR22                       ((uint32_t)0x00400000)        /*!< Interrupt Mask on line 22 */
+#define  EXTI_IMR_MR23                       ((uint32_t)0x00800000)        /*!< Interrupt Mask on line 23 */
+
+/*******************  Bit definition for EXTI_EMR register  *******************/
+#define  EXTI_EMR_MR0                        ((uint32_t)0x00000001)        /*!< Event Mask on line 0 */
+#define  EXTI_EMR_MR1                        ((uint32_t)0x00000002)        /*!< Event Mask on line 1 */
+#define  EXTI_EMR_MR2                        ((uint32_t)0x00000004)        /*!< Event Mask on line 2 */
+#define  EXTI_EMR_MR3                        ((uint32_t)0x00000008)        /*!< Event Mask on line 3 */
+#define  EXTI_EMR_MR4                        ((uint32_t)0x00000010)        /*!< Event Mask on line 4 */
+#define  EXTI_EMR_MR5                        ((uint32_t)0x00000020)        /*!< Event Mask on line 5 */
+#define  EXTI_EMR_MR6                        ((uint32_t)0x00000040)        /*!< Event Mask on line 6 */
+#define  EXTI_EMR_MR7                        ((uint32_t)0x00000080)        /*!< Event Mask on line 7 */
+#define  EXTI_EMR_MR8                        ((uint32_t)0x00000100)        /*!< Event Mask on line 8 */
+#define  EXTI_EMR_MR9                        ((uint32_t)0x00000200)        /*!< Event Mask on line 9 */
+#define  EXTI_EMR_MR10                       ((uint32_t)0x00000400)        /*!< Event Mask on line 10 */
+#define  EXTI_EMR_MR11                       ((uint32_t)0x00000800)        /*!< Event Mask on line 11 */
+#define  EXTI_EMR_MR12                       ((uint32_t)0x00001000)        /*!< Event Mask on line 12 */
+#define  EXTI_EMR_MR13                       ((uint32_t)0x00002000)        /*!< Event Mask on line 13 */
+#define  EXTI_EMR_MR14                       ((uint32_t)0x00004000)        /*!< Event Mask on line 14 */
+#define  EXTI_EMR_MR15                       ((uint32_t)0x00008000)        /*!< Event Mask on line 15 */
+#define  EXTI_EMR_MR16                       ((uint32_t)0x00010000)        /*!< Event Mask on line 16 */
+#define  EXTI_EMR_MR17                       ((uint32_t)0x00020000)        /*!< Event Mask on line 17 */
+#define  EXTI_EMR_MR18                       ((uint32_t)0x00040000)        /*!< Event Mask on line 18 */
+#define  EXTI_EMR_MR19                       ((uint32_t)0x00080000)        /*!< Event Mask on line 19 */
+#define  EXTI_EMR_MR20                       ((uint32_t)0x00100000)        /*!< Event Mask on line 20 */
+#define  EXTI_EMR_MR21                       ((uint32_t)0x00200000)        /*!< Event Mask on line 21 */
+#define  EXTI_EMR_MR22                       ((uint32_t)0x00400000)        /*!< Event Mask on line 22 */
+#define  EXTI_EMR_MR23                       ((uint32_t)0x00800000)        /*!< Event Mask on line 23 */
+
+/******************  Bit definition for EXTI_RTSR register  *******************/
+#define  EXTI_RTSR_TR0                       ((uint32_t)0x00000001)        /*!< Rising trigger event configuration bit of line 0 */
+#define  EXTI_RTSR_TR1                       ((uint32_t)0x00000002)        /*!< Rising trigger event configuration bit of line 1 */
+#define  EXTI_RTSR_TR2                       ((uint32_t)0x00000004)        /*!< Rising trigger event configuration bit of line 2 */
+#define  EXTI_RTSR_TR3                       ((uint32_t)0x00000008)        /*!< Rising trigger event configuration bit of line 3 */
+#define  EXTI_RTSR_TR4                       ((uint32_t)0x00000010)        /*!< Rising trigger event configuration bit of line 4 */
+#define  EXTI_RTSR_TR5                       ((uint32_t)0x00000020)        /*!< Rising trigger event configuration bit of line 5 */
+#define  EXTI_RTSR_TR6                       ((uint32_t)0x00000040)        /*!< Rising trigger event configuration bit of line 6 */
+#define  EXTI_RTSR_TR7                       ((uint32_t)0x00000080)        /*!< Rising trigger event configuration bit of line 7 */
+#define  EXTI_RTSR_TR8                       ((uint32_t)0x00000100)        /*!< Rising trigger event configuration bit of line 8 */
+#define  EXTI_RTSR_TR9                       ((uint32_t)0x00000200)        /*!< Rising trigger event configuration bit of line 9 */
+#define  EXTI_RTSR_TR10                      ((uint32_t)0x00000400)        /*!< Rising trigger event configuration bit of line 10 */
+#define  EXTI_RTSR_TR11                      ((uint32_t)0x00000800)        /*!< Rising trigger event configuration bit of line 11 */
+#define  EXTI_RTSR_TR12                      ((uint32_t)0x00001000)        /*!< Rising trigger event configuration bit of line 12 */
+#define  EXTI_RTSR_TR13                      ((uint32_t)0x00002000)        /*!< Rising trigger event configuration bit of line 13 */
+#define  EXTI_RTSR_TR14                      ((uint32_t)0x00004000)        /*!< Rising trigger event configuration bit of line 14 */
+#define  EXTI_RTSR_TR15                      ((uint32_t)0x00008000)        /*!< Rising trigger event configuration bit of line 15 */
+#define  EXTI_RTSR_TR16                      ((uint32_t)0x00010000)        /*!< Rising trigger event configuration bit of line 16 */
+#define  EXTI_RTSR_TR17                      ((uint32_t)0x00020000)        /*!< Rising trigger event configuration bit of line 17 */
+#define  EXTI_RTSR_TR18                      ((uint32_t)0x00040000)        /*!< Rising trigger event configuration bit of line 18 */
+#define  EXTI_RTSR_TR19                      ((uint32_t)0x00080000)        /*!< Rising trigger event configuration bit of line 19 */
+#define  EXTI_RTSR_TR20                      ((uint32_t)0x00100000)        /*!< Rising trigger event configuration bit of line 20 */
+#define  EXTI_RTSR_TR21                      ((uint32_t)0x00200000)        /*!< Rising trigger event configuration bit of line 21 */
+#define  EXTI_RTSR_TR22                      ((uint32_t)0x00400000)        /*!< Rising trigger event configuration bit of line 22 */
+#define  EXTI_RTSR_TR23                      ((uint32_t)0x00800000)        /*!< Rising trigger event configuration bit of line 23 */
+
+/******************  Bit definition for EXTI_FTSR register  *******************/
+#define  EXTI_FTSR_TR0                       ((uint32_t)0x00000001)        /*!< Falling trigger event configuration bit of line 0 */
+#define  EXTI_FTSR_TR1                       ((uint32_t)0x00000002)        /*!< Falling trigger event configuration bit of line 1 */
+#define  EXTI_FTSR_TR2                       ((uint32_t)0x00000004)        /*!< Falling trigger event configuration bit of line 2 */
+#define  EXTI_FTSR_TR3                       ((uint32_t)0x00000008)        /*!< Falling trigger event configuration bit of line 3 */
+#define  EXTI_FTSR_TR4                       ((uint32_t)0x00000010)        /*!< Falling trigger event configuration bit of line 4 */
+#define  EXTI_FTSR_TR5                       ((uint32_t)0x00000020)        /*!< Falling trigger event configuration bit of line 5 */
+#define  EXTI_FTSR_TR6                       ((uint32_t)0x00000040)        /*!< Falling trigger event configuration bit of line 6 */
+#define  EXTI_FTSR_TR7                       ((uint32_t)0x00000080)        /*!< Falling trigger event configuration bit of line 7 */
+#define  EXTI_FTSR_TR8                       ((uint32_t)0x00000100)        /*!< Falling trigger event configuration bit of line 8 */
+#define  EXTI_FTSR_TR9                       ((uint32_t)0x00000200)        /*!< Falling trigger event configuration bit of line 9 */
+#define  EXTI_FTSR_TR10                      ((uint32_t)0x00000400)        /*!< Falling trigger event configuration bit of line 10 */
+#define  EXTI_FTSR_TR11                      ((uint32_t)0x00000800)        /*!< Falling trigger event configuration bit of line 11 */
+#define  EXTI_FTSR_TR12                      ((uint32_t)0x00001000)        /*!< Falling trigger event configuration bit of line 12 */
+#define  EXTI_FTSR_TR13                      ((uint32_t)0x00002000)        /*!< Falling trigger event configuration bit of line 13 */
+#define  EXTI_FTSR_TR14                      ((uint32_t)0x00004000)        /*!< Falling trigger event configuration bit of line 14 */
+#define  EXTI_FTSR_TR15                      ((uint32_t)0x00008000)        /*!< Falling trigger event configuration bit of line 15 */
+#define  EXTI_FTSR_TR16                      ((uint32_t)0x00010000)        /*!< Falling trigger event configuration bit of line 16 */
+#define  EXTI_FTSR_TR17                      ((uint32_t)0x00020000)        /*!< Falling trigger event configuration bit of line 17 */
+#define  EXTI_FTSR_TR18                      ((uint32_t)0x00040000)        /*!< Falling trigger event configuration bit of line 18 */
+#define  EXTI_FTSR_TR19                      ((uint32_t)0x00080000)        /*!< Falling trigger event configuration bit of line 19 */
+#define  EXTI_FTSR_TR20                      ((uint32_t)0x00100000)        /*!< Falling trigger event configuration bit of line 20 */
+#define  EXTI_FTSR_TR21                      ((uint32_t)0x00200000)        /*!< Falling trigger event configuration bit of line 21 */
+#define  EXTI_FTSR_TR22                      ((uint32_t)0x00400000)        /*!< Falling trigger event configuration bit of line 22 */
+#define  EXTI_FTSR_TR23                      ((uint32_t)0x00800000)        /*!< Falling trigger event configuration bit of line 23 */
+
+/******************  Bit definition for EXTI_SWIER register  ******************/
+#define  EXTI_SWIER_SWIER0                   ((uint32_t)0x00000001)        /*!< Software Interrupt on line 0 */
+#define  EXTI_SWIER_SWIER1                   ((uint32_t)0x00000002)        /*!< Software Interrupt on line 1 */
+#define  EXTI_SWIER_SWIER2                   ((uint32_t)0x00000004)        /*!< Software Interrupt on line 2 */
+#define  EXTI_SWIER_SWIER3                   ((uint32_t)0x00000008)        /*!< Software Interrupt on line 3 */
+#define  EXTI_SWIER_SWIER4                   ((uint32_t)0x00000010)        /*!< Software Interrupt on line 4 */
+#define  EXTI_SWIER_SWIER5                   ((uint32_t)0x00000020)        /*!< Software Interrupt on line 5 */
+#define  EXTI_SWIER_SWIER6                   ((uint32_t)0x00000040)        /*!< Software Interrupt on line 6 */
+#define  EXTI_SWIER_SWIER7                   ((uint32_t)0x00000080)        /*!< Software Interrupt on line 7 */
+#define  EXTI_SWIER_SWIER8                   ((uint32_t)0x00000100)        /*!< Software Interrupt on line 8 */
+#define  EXTI_SWIER_SWIER9                   ((uint32_t)0x00000200)        /*!< Software Interrupt on line 9 */
+#define  EXTI_SWIER_SWIER10                  ((uint32_t)0x00000400)        /*!< Software Interrupt on line 10 */
+#define  EXTI_SWIER_SWIER11                  ((uint32_t)0x00000800)        /*!< Software Interrupt on line 11 */
+#define  EXTI_SWIER_SWIER12                  ((uint32_t)0x00001000)        /*!< Software Interrupt on line 12 */
+#define  EXTI_SWIER_SWIER13                  ((uint32_t)0x00002000)        /*!< Software Interrupt on line 13 */
+#define  EXTI_SWIER_SWIER14                  ((uint32_t)0x00004000)        /*!< Software Interrupt on line 14 */
+#define  EXTI_SWIER_SWIER15                  ((uint32_t)0x00008000)        /*!< Software Interrupt on line 15 */
+#define  EXTI_SWIER_SWIER16                  ((uint32_t)0x00010000)        /*!< Software Interrupt on line 16 */
+#define  EXTI_SWIER_SWIER17                  ((uint32_t)0x00020000)        /*!< Software Interrupt on line 17 */
+#define  EXTI_SWIER_SWIER18                  ((uint32_t)0x00040000)        /*!< Software Interrupt on line 18 */
+#define  EXTI_SWIER_SWIER19                  ((uint32_t)0x00080000)        /*!< Software Interrupt on line 19 */
+#define  EXTI_SWIER_SWIER20                  ((uint32_t)0x00100000)        /*!< Software Interrupt on line 20 */
+#define  EXTI_SWIER_SWIER21                  ((uint32_t)0x00200000)        /*!< Software Interrupt on line 21 */
+#define  EXTI_SWIER_SWIER22                  ((uint32_t)0x00400000)        /*!< Software Interrupt on line 22 */
+#define  EXTI_SWIER_SWIER23                  ((uint32_t)0x00800000)        /*!< Software Interrupt on line 23 */
+
+/*******************  Bit definition for EXTI_PR register  ********************/
+#define  EXTI_PR_PR0                         ((uint32_t)0x00000001)        /*!< Pending bit for line 0 */
+#define  EXTI_PR_PR1                         ((uint32_t)0x00000002)        /*!< Pending bit for line 1 */
+#define  EXTI_PR_PR2                         ((uint32_t)0x00000004)        /*!< Pending bit for line 2 */
+#define  EXTI_PR_PR3                         ((uint32_t)0x00000008)        /*!< Pending bit for line 3 */
+#define  EXTI_PR_PR4                         ((uint32_t)0x00000010)        /*!< Pending bit for line 4 */
+#define  EXTI_PR_PR5                         ((uint32_t)0x00000020)        /*!< Pending bit for line 5 */
+#define  EXTI_PR_PR6                         ((uint32_t)0x00000040)        /*!< Pending bit for line 6 */
+#define  EXTI_PR_PR7                         ((uint32_t)0x00000080)        /*!< Pending bit for line 7 */
+#define  EXTI_PR_PR8                         ((uint32_t)0x00000100)        /*!< Pending bit for line 8 */
+#define  EXTI_PR_PR9                         ((uint32_t)0x00000200)        /*!< Pending bit for line 9 */
+#define  EXTI_PR_PR10                        ((uint32_t)0x00000400)        /*!< Pending bit for line 10 */
+#define  EXTI_PR_PR11                        ((uint32_t)0x00000800)        /*!< Pending bit for line 11 */
+#define  EXTI_PR_PR12                        ((uint32_t)0x00001000)        /*!< Pending bit for line 12 */
+#define  EXTI_PR_PR13                        ((uint32_t)0x00002000)        /*!< Pending bit for line 13 */
+#define  EXTI_PR_PR14                        ((uint32_t)0x00004000)        /*!< Pending bit for line 14 */
+#define  EXTI_PR_PR15                        ((uint32_t)0x00008000)        /*!< Pending bit for line 15 */
+#define  EXTI_PR_PR16                        ((uint32_t)0x00010000)        /*!< Pending bit for line 16 */
+#define  EXTI_PR_PR17                        ((uint32_t)0x00020000)        /*!< Pending bit for line 17 */
+#define  EXTI_PR_PR18                        ((uint32_t)0x00040000)        /*!< Pending bit for line 18 */
+#define  EXTI_PR_PR19                        ((uint32_t)0x00080000)        /*!< Pending bit for line 19 */
+#define  EXTI_PR_PR20                        ((uint32_t)0x00100000)        /*!< Pending bit for line 20 */
+#define  EXTI_PR_PR21                        ((uint32_t)0x00200000)        /*!< Pending bit for line 21 */
+#define  EXTI_PR_PR22                        ((uint32_t)0x00400000)        /*!< Pending bit for line 22 */
+#define  EXTI_PR_PR23                        ((uint32_t)0x00800000)        /*!< Pending bit for line 23 */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    FLASH                                   */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bits definition for FLASH_ACR register  *****************/
+#define FLASH_ACR_LATENCY                    ((uint32_t)0x0000000F)
+#define FLASH_ACR_LATENCY_0WS                ((uint32_t)0x00000000)
+#define FLASH_ACR_LATENCY_1WS                ((uint32_t)0x00000001)
+#define FLASH_ACR_LATENCY_2WS                ((uint32_t)0x00000002)
+#define FLASH_ACR_LATENCY_3WS                ((uint32_t)0x00000003)
+#define FLASH_ACR_LATENCY_4WS                ((uint32_t)0x00000004)
+#define FLASH_ACR_LATENCY_5WS                ((uint32_t)0x00000005)
+#define FLASH_ACR_LATENCY_6WS                ((uint32_t)0x00000006)
+#define FLASH_ACR_LATENCY_7WS                ((uint32_t)0x00000007)
+#define FLASH_ACR_LATENCY_8WS                ((uint32_t)0x00000008)
+#define FLASH_ACR_LATENCY_9WS                ((uint32_t)0x00000009)
+#define FLASH_ACR_LATENCY_10WS               ((uint32_t)0x0000000A)
+#define FLASH_ACR_LATENCY_11WS               ((uint32_t)0x0000000B)
+#define FLASH_ACR_LATENCY_12WS               ((uint32_t)0x0000000C)
+#define FLASH_ACR_LATENCY_13WS               ((uint32_t)0x0000000D)
+#define FLASH_ACR_LATENCY_14WS               ((uint32_t)0x0000000E)
+#define FLASH_ACR_LATENCY_15WS               ((uint32_t)0x0000000F)
+#define FLASH_ACR_PRFTEN                     ((uint32_t)0x00000100)
+#define FLASH_ACR_ARTEN                      ((uint32_t)0x00000200)
+#define FLASH_ACR_ARTRST                     ((uint32_t)0x00000800)
+
+/*******************  Bits definition for FLASH_SR register  ******************/
+#define FLASH_SR_EOP                         ((uint32_t)0x00000001)
+#define FLASH_SR_OPERR                       ((uint32_t)0x00000002)
+#define FLASH_SR_WRPERR                      ((uint32_t)0x00000010)
+#define FLASH_SR_PGAERR                      ((uint32_t)0x00000020)
+#define FLASH_SR_PGPERR                      ((uint32_t)0x00000040)
+#define FLASH_SR_ERSERR                      ((uint32_t)0x00000080)
+#define FLASH_SR_BSY                         ((uint32_t)0x00010000)
+
+/*******************  Bits definition for FLASH_CR register  ******************/
+#define FLASH_CR_PG                          ((uint32_t)0x00000001)
+#define FLASH_CR_SER                         ((uint32_t)0x00000002)
+#define FLASH_CR_MER                         ((uint32_t)0x00000004)
+#define FLASH_CR_SNB                         ((uint32_t)0x00000078)
+#define FLASH_CR_SNB_0                       ((uint32_t)0x00000008)
+#define FLASH_CR_SNB_1                       ((uint32_t)0x00000010)
+#define FLASH_CR_SNB_2                       ((uint32_t)0x00000020)
+#define FLASH_CR_SNB_3                       ((uint32_t)0x00000040)
+#define FLASH_CR_PSIZE                       ((uint32_t)0x00000300)
+#define FLASH_CR_PSIZE_0                     ((uint32_t)0x00000100)
+#define FLASH_CR_PSIZE_1                     ((uint32_t)0x00000200)
+#define FLASH_CR_STRT                        ((uint32_t)0x00010000)
+#define FLASH_CR_EOPIE                       ((uint32_t)0x01000000)
+#define FLASH_CR_ERRIE                       ((uint32_t)0x02000000)
+#define FLASH_CR_LOCK                        ((uint32_t)0x80000000)
+
+/*******************  Bits definition for FLASH_OPTCR register  ***************/
+#define FLASH_OPTCR_OPTLOCK                 ((uint32_t)0x00000001)
+#define FLASH_OPTCR_OPTSTRT                 ((uint32_t)0x00000002)
+#define FLASH_OPTCR_BOR_LEV                 ((uint32_t)0x0000000C)
+#define FLASH_OPTCR_BOR_LEV_0               ((uint32_t)0x00000004)
+#define FLASH_OPTCR_BOR_LEV_1               ((uint32_t)0x00000008)
+#define FLASH_OPTCR_WWDG_SW                 ((uint32_t)0x00000010)
+#define FLASH_OPTCR_IWDG_SW                 ((uint32_t)0x00000020)
+#define FLASH_OPTCR_nRST_STOP               ((uint32_t)0x00000040)
+#define FLASH_OPTCR_nRST_STDBY              ((uint32_t)0x00000080)
+#define FLASH_OPTCR_RDP                     ((uint32_t)0x0000FF00)
+#define FLASH_OPTCR_RDP_0                   ((uint32_t)0x00000100)
+#define FLASH_OPTCR_RDP_1                   ((uint32_t)0x00000200)
+#define FLASH_OPTCR_RDP_2                   ((uint32_t)0x00000400)
+#define FLASH_OPTCR_RDP_3                   ((uint32_t)0x00000800)
+#define FLASH_OPTCR_RDP_4                   ((uint32_t)0x00001000)
+#define FLASH_OPTCR_RDP_5                   ((uint32_t)0x00002000)
+#define FLASH_OPTCR_RDP_6                   ((uint32_t)0x00004000)
+#define FLASH_OPTCR_RDP_7                   ((uint32_t)0x00008000)
+#define FLASH_OPTCR_nWRP                    ((uint32_t)0x00FF0000)
+#define FLASH_OPTCR_nWRP_0                  ((uint32_t)0x00010000)
+#define FLASH_OPTCR_nWRP_1                  ((uint32_t)0x00020000)
+#define FLASH_OPTCR_nWRP_2                  ((uint32_t)0x00040000)
+#define FLASH_OPTCR_nWRP_3                  ((uint32_t)0x00080000)
+#define FLASH_OPTCR_nWRP_4                  ((uint32_t)0x00100000)
+#define FLASH_OPTCR_nWRP_5                  ((uint32_t)0x00200000)
+#define FLASH_OPTCR_nWRP_6                  ((uint32_t)0x00400000)
+#define FLASH_OPTCR_nWRP_7                  ((uint32_t)0x00800000)
+#define FLASH_OPTCR_IWDG_STDBY              ((uint32_t)0x40000000)
+#define FLASH_OPTCR_IWDG_STOP               ((uint32_t)0x80000000)
+
+/*******************  Bits definition for FLASH_OPTCR1 register  ***************/
+#define FLASH_OPTCR1_BOOT_ADD0              ((uint32_t)0x0000FFFF)
+#define FLASH_OPTCR1_BOOT_ADD1              ((uint32_t)0xFFFF0000)
+
+/******************************************************************************/
+/*                                                                            */
+/*                          Flexible Memory Controller                        */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for FMC_BCR1 register  *******************/
+#define  FMC_BCR1_MBKEN                     ((uint32_t)0x00000001)        /*!<Memory bank enable bit                 */
+#define  FMC_BCR1_MUXEN                     ((uint32_t)0x00000002)        /*!<Address/data multiplexing enable bit   */
+
+#define  FMC_BCR1_MTYP                      ((uint32_t)0x0000000C)        /*!<MTYP[1:0] bits (Memory type)           */
+#define  FMC_BCR1_MTYP_0                    ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_BCR1_MTYP_1                    ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_BCR1_MWID                      ((uint32_t)0x00000030)        /*!<MWID[1:0] bits (Memory data bus width) */
+#define  FMC_BCR1_MWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BCR1_MWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_BCR1_FACCEN                    ((uint32_t)0x00000040)        /*!<Flash access enable        */
+#define  FMC_BCR1_BURSTEN                   ((uint32_t)0x00000100)        /*!<Burst enable bit           */
+#define  FMC_BCR1_WAITPOL                   ((uint32_t)0x00000200)        /*!<Wait signal polarity bit   */
+#define  FMC_BCR1_WRAPMOD                   ((uint32_t)0x00000400)        /*!<Wrapped burst mode support */
+#define  FMC_BCR1_WAITCFG                   ((uint32_t)0x00000800)        /*!<Wait timing configuration  */
+#define  FMC_BCR1_WREN                      ((uint32_t)0x00001000)        /*!<Write enable bit           */
+#define  FMC_BCR1_WAITEN                    ((uint32_t)0x00002000)        /*!<Wait enable bit            */
+#define  FMC_BCR1_EXTMOD                    ((uint32_t)0x00004000)        /*!<Extended mode enable       */
+#define  FMC_BCR1_ASYNCWAIT                 ((uint32_t)0x00008000)        /*!<Asynchronous wait          */
+#define  FMC_BCR1_CPSIZE                     ((uint32_t)0x00070000)        /*!<CRAM page size             */
+#define  FMC_BCR1_CPSIZE_0                   ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BCR1_CPSIZE_1                   ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BCR1_CPSIZE_2                   ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BCR1_CBURSTRW                  ((uint32_t)0x00080000)        /*!<Write burst enable         */
+#define  FMC_BCR1_CCLKEN                    ((uint32_t)0x00100000)        /*!<Continous clock enable     */
+#define  FMC_BCR1_WFDIS                     ((uint32_t)0x00200000)        /*!<Write FIFO Disable         */
+
+/******************  Bit definition for FMC_BCR2 register  *******************/
+#define  FMC_BCR2_MBKEN                     ((uint32_t)0x00000001)        /*!<Memory bank enable bit                 */
+#define  FMC_BCR2_MUXEN                     ((uint32_t)0x00000002)        /*!<Address/data multiplexing enable bit   */
+
+#define  FMC_BCR2_MTYP                      ((uint32_t)0x0000000C)        /*!<MTYP[1:0] bits (Memory type)           */
+#define  FMC_BCR2_MTYP_0                    ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_BCR2_MTYP_1                    ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_BCR2_MWID                      ((uint32_t)0x00000030)        /*!<MWID[1:0] bits (Memory data bus width) */
+#define  FMC_BCR2_MWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BCR2_MWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_BCR2_FACCEN                    ((uint32_t)0x00000040)        /*!<Flash access enable        */
+#define  FMC_BCR2_BURSTEN                   ((uint32_t)0x00000100)        /*!<Burst enable bit           */
+#define  FMC_BCR2_WAITPOL                   ((uint32_t)0x00000200)        /*!<Wait signal polarity bit   */
+#define  FMC_BCR2_WRAPMOD                   ((uint32_t)0x00000400)        /*!<Wrapped burst mode support */
+#define  FMC_BCR2_WAITCFG                   ((uint32_t)0x00000800)        /*!<Wait timing configuration  */
+#define  FMC_BCR2_WREN                      ((uint32_t)0x00001000)        /*!<Write enable bit           */
+#define  FMC_BCR2_WAITEN                    ((uint32_t)0x00002000)        /*!<Wait enable bit            */
+#define  FMC_BCR2_EXTMOD                    ((uint32_t)0x00004000)        /*!<Extended mode enable       */
+#define  FMC_BCR2_ASYNCWAIT                 ((uint32_t)0x00008000)        /*!<Asynchronous wait          */
+#define  FMC_BCR2_CPSIZE                     ((uint32_t)0x00070000)        /*!<CRAM page size             */
+#define  FMC_BCR2_CPSIZE_0                   ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BCR2_CPSIZE_1                   ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BCR2_CPSIZE_2                   ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BCR2_CBURSTRW                  ((uint32_t)0x00080000)        /*!<Write burst enable         */
+
+/******************  Bit definition for FMC_BCR3 register  *******************/
+#define  FMC_BCR3_MBKEN                     ((uint32_t)0x00000001)        /*!<Memory bank enable bit                 */
+#define  FMC_BCR3_MUXEN                     ((uint32_t)0x00000002)        /*!<Address/data multiplexing enable bit   */
+
+#define  FMC_BCR3_MTYP                      ((uint32_t)0x0000000C)        /*!<MTYP[1:0] bits (Memory type)           */
+#define  FMC_BCR3_MTYP_0                    ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_BCR3_MTYP_1                    ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_BCR3_MWID                      ((uint32_t)0x00000030)        /*!<MWID[1:0] bits (Memory data bus width) */
+#define  FMC_BCR3_MWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BCR3_MWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_BCR3_FACCEN                    ((uint32_t)0x00000040)        /*!<Flash access enable        */
+#define  FMC_BCR3_BURSTEN                   ((uint32_t)0x00000100)        /*!<Burst enable bit           */
+#define  FMC_BCR3_WAITPOL                   ((uint32_t)0x00000200)        /*!<Wait signal polarity bit   */
+#define  FMC_BCR3_WRAPMOD                   ((uint32_t)0x00000400)        /*!<Wrapped burst mode support */
+#define  FMC_BCR3_WAITCFG                   ((uint32_t)0x00000800)        /*!<Wait timing configuration  */
+#define  FMC_BCR3_WREN                      ((uint32_t)0x00001000)        /*!<Write enable bit           */
+#define  FMC_BCR3_WAITEN                    ((uint32_t)0x00002000)        /*!<Wait enable bit            */
+#define  FMC_BCR3_EXTMOD                    ((uint32_t)0x00004000)        /*!<Extended mode enable       */
+#define  FMC_BCR3_ASYNCWAIT                 ((uint32_t)0x00008000)        /*!<Asynchronous wait          */
+#define  FMC_BCR3_CPSIZE                     ((uint32_t)0x00070000)        /*!<CRAM page size             */
+#define  FMC_BCR3_CPSIZE_0                   ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BCR3_CPSIZE_1                   ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BCR3_CPSIZE_2                   ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BCR3_CBURSTRW                  ((uint32_t)0x00080000)        /*!<Write burst enable         */
+
+/******************  Bit definition for FMC_BCR4 register  *******************/
+#define  FMC_BCR4_MBKEN                     ((uint32_t)0x00000001)        /*!<Memory bank enable bit                 */
+#define  FMC_BCR4_MUXEN                     ((uint32_t)0x00000002)        /*!<Address/data multiplexing enable bit   */
+
+#define  FMC_BCR4_MTYP                      ((uint32_t)0x0000000C)        /*!<MTYP[1:0] bits (Memory type)           */
+#define  FMC_BCR4_MTYP_0                    ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_BCR4_MTYP_1                    ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_BCR4_MWID                      ((uint32_t)0x00000030)        /*!<MWID[1:0] bits (Memory data bus width) */
+#define  FMC_BCR4_MWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BCR4_MWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_BCR4_FACCEN                    ((uint32_t)0x00000040)        /*!<Flash access enable        */
+#define  FMC_BCR4_BURSTEN                   ((uint32_t)0x00000100)        /*!<Burst enable bit           */
+#define  FMC_BCR4_WAITPOL                   ((uint32_t)0x00000200)        /*!<Wait signal polarity bit   */
+#define  FMC_BCR4_WRAPMOD                   ((uint32_t)0x00000400)        /*!<Wrapped burst mode support */
+#define  FMC_BCR4_WAITCFG                   ((uint32_t)0x00000800)        /*!<Wait timing configuration  */
+#define  FMC_BCR4_WREN                      ((uint32_t)0x00001000)        /*!<Write enable bit           */
+#define  FMC_BCR4_WAITEN                    ((uint32_t)0x00002000)        /*!<Wait enable bit            */
+#define  FMC_BCR4_EXTMOD                    ((uint32_t)0x00004000)        /*!<Extended mode enable       */
+#define  FMC_BCR4_ASYNCWAIT                 ((uint32_t)0x00008000)        /*!<Asynchronous wait          */
+#define  FMC_BCR4_CPSIZE                     ((uint32_t)0x00070000)        /*!<CRAM page size             */
+#define  FMC_BCR4_CPSIZE_0                   ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BCR4_CPSIZE_1                   ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BCR4_CPSIZE_2                   ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BCR4_CBURSTRW                  ((uint32_t)0x00080000)        /*!<Write burst enable         */
+
+/******************  Bit definition for FMC_BTR1 register  ******************/
+#define  FMC_BTR1_ADDSET                    ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BTR1_ADDSET_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BTR1_ADDSET_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BTR1_ADDSET_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BTR1_ADDSET_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BTR1_ADDHLD                    ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration)  */
+#define  FMC_BTR1_ADDHLD_0                  ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BTR1_ADDHLD_1                  ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BTR1_ADDHLD_2                  ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BTR1_ADDHLD_3                  ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BTR1_DATAST                    ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BTR1_DATAST_0                  ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BTR1_DATAST_1                  ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BTR1_DATAST_2                  ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BTR1_DATAST_3                  ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BTR1_DATAST_4                  ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BTR1_DATAST_5                  ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BTR1_DATAST_6                  ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BTR1_DATAST_7                  ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BTR1_BUSTURN                   ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BTR1_BUSTURN_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BTR1_BUSTURN_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BTR1_BUSTURN_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BTR1_BUSTURN_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BTR1_CLKDIV                    ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BTR1_CLKDIV_0                  ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BTR1_CLKDIV_1                  ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BTR1_CLKDIV_2                  ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BTR1_CLKDIV_3                  ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BTR1_DATLAT                    ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BTR1_DATLAT_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BTR1_DATLAT_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BTR1_DATLAT_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BTR1_DATLAT_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BTR1_ACCMOD                    ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BTR1_ACCMOD_0                  ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BTR1_ACCMOD_1                  ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BTR2 register  *******************/
+#define  FMC_BTR2_ADDSET                    ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BTR2_ADDSET_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BTR2_ADDSET_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BTR2_ADDSET_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BTR2_ADDSET_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BTR2_ADDHLD                    ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BTR2_ADDHLD_0                  ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BTR2_ADDHLD_1                  ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BTR2_ADDHLD_2                  ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BTR2_ADDHLD_3                  ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BTR2_DATAST                    ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BTR2_DATAST_0                  ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BTR2_DATAST_1                  ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BTR2_DATAST_2                  ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BTR2_DATAST_3                  ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BTR2_DATAST_4                  ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BTR2_DATAST_5                  ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BTR2_DATAST_6                  ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BTR2_DATAST_7                  ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BTR2_BUSTURN                   ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BTR2_BUSTURN_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BTR2_BUSTURN_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BTR2_BUSTURN_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BTR2_BUSTURN_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BTR2_CLKDIV                    ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BTR2_CLKDIV_0                  ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BTR2_CLKDIV_1                  ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BTR2_CLKDIV_2                  ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BTR2_CLKDIV_3                  ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BTR2_DATLAT                    ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BTR2_DATLAT_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BTR2_DATLAT_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BTR2_DATLAT_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BTR2_DATLAT_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BTR2_ACCMOD                    ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BTR2_ACCMOD_0                  ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BTR2_ACCMOD_1                  ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/*******************  Bit definition for FMC_BTR3 register  *******************/
+#define  FMC_BTR3_ADDSET                    ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BTR3_ADDSET_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BTR3_ADDSET_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BTR3_ADDSET_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BTR3_ADDSET_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BTR3_ADDHLD                    ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BTR3_ADDHLD_0                  ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BTR3_ADDHLD_1                  ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BTR3_ADDHLD_2                  ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BTR3_ADDHLD_3                  ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BTR3_DATAST                    ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BTR3_DATAST_0                  ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BTR3_DATAST_1                  ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BTR3_DATAST_2                  ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BTR3_DATAST_3                  ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BTR3_DATAST_4                  ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BTR3_DATAST_5                  ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BTR3_DATAST_6                  ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BTR3_DATAST_7                  ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BTR3_BUSTURN                   ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BTR3_BUSTURN_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BTR3_BUSTURN_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BTR3_BUSTURN_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BTR3_BUSTURN_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BTR3_CLKDIV                    ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BTR3_CLKDIV_0                  ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BTR3_CLKDIV_1                  ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BTR3_CLKDIV_2                  ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BTR3_CLKDIV_3                  ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BTR3_DATLAT                    ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BTR3_DATLAT_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BTR3_DATLAT_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BTR3_DATLAT_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BTR3_DATLAT_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BTR3_ACCMOD                    ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BTR3_ACCMOD_0                  ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BTR3_ACCMOD_1                  ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BTR4 register  *******************/
+#define  FMC_BTR4_ADDSET                    ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BTR4_ADDSET_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BTR4_ADDSET_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BTR4_ADDSET_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BTR4_ADDSET_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BTR4_ADDHLD                    ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BTR4_ADDHLD_0                  ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BTR4_ADDHLD_1                  ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BTR4_ADDHLD_2                  ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BTR4_ADDHLD_3                  ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BTR4_DATAST                    ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BTR4_DATAST_0                  ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BTR4_DATAST_1                  ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BTR4_DATAST_2                  ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BTR4_DATAST_3                  ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BTR4_DATAST_4                  ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BTR4_DATAST_5                  ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BTR4_DATAST_6                  ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BTR4_DATAST_7                  ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BTR4_BUSTURN                   ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BTR4_BUSTURN_0                 ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BTR4_BUSTURN_1                 ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BTR4_BUSTURN_2                 ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BTR4_BUSTURN_3                 ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BTR4_CLKDIV                    ((uint32_t)0x00F00000)        /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FMC_BTR4_CLKDIV_0                  ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_BTR4_CLKDIV_1                  ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_BTR4_CLKDIV_2                  ((uint32_t)0x00400000)        /*!<Bit 2 */
+#define  FMC_BTR4_CLKDIV_3                  ((uint32_t)0x00800000)        /*!<Bit 3 */
+
+#define  FMC_BTR4_DATLAT                    ((uint32_t)0x0F000000)        /*!<DATLA[3:0] bits (Data latency) */
+#define  FMC_BTR4_DATLAT_0                  ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_BTR4_DATLAT_1                  ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_BTR4_DATLAT_2                  ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_BTR4_DATLAT_3                  ((uint32_t)0x08000000)        /*!<Bit 3 */
+
+#define  FMC_BTR4_ACCMOD                    ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BTR4_ACCMOD_0                  ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BTR4_ACCMOD_1                  ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BWTR1 register  ******************/
+#define  FMC_BWTR1_ADDSET                   ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BWTR1_ADDSET_0                 ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BWTR1_ADDSET_1                 ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BWTR1_ADDSET_2                 ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BWTR1_ADDSET_3                 ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BWTR1_ADDHLD                   ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BWTR1_ADDHLD_0                 ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BWTR1_ADDHLD_1                 ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BWTR1_ADDHLD_2                 ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BWTR1_ADDHLD_3                 ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BWTR1_DATAST                   ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BWTR1_DATAST_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BWTR1_DATAST_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BWTR1_DATAST_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BWTR1_DATAST_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BWTR1_DATAST_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BWTR1_DATAST_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BWTR1_DATAST_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BWTR1_DATAST_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BWTR1_BUSTURN                  ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BWTR1_BUSTURN_0                ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BWTR1_BUSTURN_1                ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BWTR1_BUSTURN_2                ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BWTR1_BUSTURN_3                ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BWTR1_ACCMOD                   ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BWTR1_ACCMOD_0                 ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BWTR1_ACCMOD_1                 ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BWTR2 register  ******************/
+#define  FMC_BWTR2_ADDSET                   ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BWTR2_ADDSET_0                 ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BWTR2_ADDSET_1                 ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BWTR2_ADDSET_2                 ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BWTR2_ADDSET_3                 ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BWTR2_ADDHLD                   ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BWTR2_ADDHLD_0                 ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BWTR2_ADDHLD_1                 ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BWTR2_ADDHLD_2                 ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BWTR2_ADDHLD_3                 ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BWTR2_DATAST                   ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BWTR2_DATAST_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BWTR2_DATAST_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BWTR2_DATAST_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BWTR2_DATAST_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BWTR2_DATAST_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BWTR2_DATAST_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BWTR2_DATAST_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BWTR2_DATAST_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BWTR2_BUSTURN                  ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BWTR2_BUSTURN_0                ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BWTR2_BUSTURN_1                ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BWTR2_BUSTURN_2                ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BWTR2_BUSTURN_3                ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BWTR2_ACCMOD                   ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BWTR2_ACCMOD_0                 ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BWTR2_ACCMOD_1                 ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BWTR3 register  ******************/
+#define  FMC_BWTR3_ADDSET                   ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BWTR3_ADDSET_0                 ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BWTR3_ADDSET_1                 ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BWTR3_ADDSET_2                 ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BWTR3_ADDSET_3                 ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BWTR3_ADDHLD                   ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BWTR3_ADDHLD_0                 ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BWTR3_ADDHLD_1                 ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BWTR3_ADDHLD_2                 ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BWTR3_ADDHLD_3                 ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BWTR3_DATAST                   ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BWTR3_DATAST_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BWTR3_DATAST_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BWTR3_DATAST_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BWTR3_DATAST_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BWTR3_DATAST_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BWTR3_DATAST_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BWTR3_DATAST_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BWTR3_DATAST_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BWTR3_BUSTURN                  ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BWTR3_BUSTURN_0                ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BWTR3_BUSTURN_1                ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BWTR3_BUSTURN_2                ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BWTR3_BUSTURN_3                ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BWTR3_ACCMOD                   ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BWTR3_ACCMOD_0                 ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BWTR3_ACCMOD_1                 ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_BWTR4 register  ******************/
+#define  FMC_BWTR4_ADDSET                   ((uint32_t)0x0000000F)        /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define  FMC_BWTR4_ADDSET_0                 ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_BWTR4_ADDSET_1                 ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_BWTR4_ADDSET_2                 ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_BWTR4_ADDSET_3                 ((uint32_t)0x00000008)        /*!<Bit 3 */
+
+#define  FMC_BWTR4_ADDHLD                   ((uint32_t)0x000000F0)        /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FMC_BWTR4_ADDHLD_0                 ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_BWTR4_ADDHLD_1                 ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_BWTR4_ADDHLD_2                 ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_BWTR4_ADDHLD_3                 ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_BWTR4_DATAST                   ((uint32_t)0x0000FF00)        /*!<DATAST [3:0] bits (Data-phase duration) */
+#define  FMC_BWTR4_DATAST_0                 ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_BWTR4_DATAST_1                 ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_BWTR4_DATAST_2                 ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_BWTR4_DATAST_3                 ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_BWTR4_DATAST_4                 ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_BWTR4_DATAST_5                 ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_BWTR4_DATAST_6                 ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_BWTR4_DATAST_7                 ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_BWTR4_BUSTURN                  ((uint32_t)0x000F0000)        /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FMC_BWTR4_BUSTURN_0                ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_BWTR4_BUSTURN_1                ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_BWTR4_BUSTURN_2                ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_BWTR4_BUSTURN_3                ((uint32_t)0x00080000)        /*!<Bit 3 */
+
+#define  FMC_BWTR4_ACCMOD                   ((uint32_t)0x30000000)        /*!<ACCMOD[1:0] bits (Access mode) */
+#define  FMC_BWTR4_ACCMOD_0                 ((uint32_t)0x10000000)        /*!<Bit 0 */
+#define  FMC_BWTR4_ACCMOD_1                 ((uint32_t)0x20000000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_PCR register  *******************/
+#define  FMC_PCR_PWAITEN                   ((uint32_t)0x00000002)        /*!<Wait feature enable bit                   */
+#define  FMC_PCR_PBKEN                     ((uint32_t)0x00000004)        /*!<PC Card/NAND Flash memory bank enable bit */
+#define  FMC_PCR_PTYP                      ((uint32_t)0x00000008)        /*!<Memory type                               */
+
+#define  FMC_PCR_PWID                      ((uint32_t)0x00000030)        /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define  FMC_PCR_PWID_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_PCR_PWID_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_PCR_ECCEN                     ((uint32_t)0x00000040)        /*!<ECC computation logic enable bit          */
+
+#define  FMC_PCR_TCLR                      ((uint32_t)0x00001E00)        /*!<TCLR[3:0] bits (CLE to RE delay)          */
+#define  FMC_PCR_TCLR_0                    ((uint32_t)0x00000200)        /*!<Bit 0 */
+#define  FMC_PCR_TCLR_1                    ((uint32_t)0x00000400)        /*!<Bit 1 */
+#define  FMC_PCR_TCLR_2                    ((uint32_t)0x00000800)        /*!<Bit 2 */
+#define  FMC_PCR_TCLR_3                    ((uint32_t)0x00001000)        /*!<Bit 3 */
+
+#define  FMC_PCR_TAR                       ((uint32_t)0x0001E000)        /*!<TAR[3:0] bits (ALE to RE delay)           */
+#define  FMC_PCR_TAR_0                     ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  FMC_PCR_TAR_1                     ((uint32_t)0x00004000)        /*!<Bit 1 */
+#define  FMC_PCR_TAR_2                     ((uint32_t)0x00008000)        /*!<Bit 2 */
+#define  FMC_PCR_TAR_3                     ((uint32_t)0x00010000)        /*!<Bit 3 */
+
+#define  FMC_PCR_ECCPS                     ((uint32_t)0x000E0000)        /*!<ECCPS[2:0] bits (ECC page size)           */
+#define  FMC_PCR_ECCPS_0                   ((uint32_t)0x00020000)        /*!<Bit 0 */
+#define  FMC_PCR_ECCPS_1                   ((uint32_t)0x00040000)        /*!<Bit 1 */
+#define  FMC_PCR_ECCPS_2                   ((uint32_t)0x00080000)        /*!<Bit 2 */
+
+/*******************  Bit definition for FMC_SR register  *******************/
+#define  FMC_SR_IRS                        ((uint32_t)0x01)              /*!<Interrupt Rising Edge status                */
+#define  FMC_SR_ILS                        ((uint32_t)0x02)              /*!<Interrupt Level status                      */
+#define  FMC_SR_IFS                        ((uint32_t)0x04)              /*!<Interrupt Falling Edge status               */
+#define  FMC_SR_IREN                       ((uint32_t)0x08)              /*!<Interrupt Rising Edge detection Enable bit  */
+#define  FMC_SR_ILEN                       ((uint32_t)0x10)              /*!<Interrupt Level detection Enable bit        */
+#define  FMC_SR_IFEN                       ((uint32_t)0x20)              /*!<Interrupt Falling Edge detection Enable bit */
+#define  FMC_SR_FEMPT                      ((uint32_t)0x40)              /*!<FIFO empty                                  */
+
+/******************  Bit definition for FMC_PMEM register  ******************/
+#define  FMC_PMEM_MEMSET3                  ((uint32_t)0x000000FF)        /*!<MEMSET3[7:0] bits (Common memory 3 setup time) */
+#define  FMC_PMEM_MEMSET3_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_PMEM_MEMSET3_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_PMEM_MEMSET3_2                ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_PMEM_MEMSET3_3                ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  FMC_PMEM_MEMSET3_4                ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  FMC_PMEM_MEMSET3_5                ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  FMC_PMEM_MEMSET3_6                ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  FMC_PMEM_MEMSET3_7                ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  FMC_PMEM_MEMWAIT3                 ((uint32_t)0x0000FF00)        /*!<MEMWAIT3[7:0] bits (Common memory 3 wait time) */
+#define  FMC_PMEM_MEMWAIT3_0               ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_PMEM_MEMWAIT3_1               ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_PMEM_MEMWAIT3_2               ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_PMEM_MEMWAIT3_3               ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_PMEM_MEMWAIT3_4               ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_PMEM_MEMWAIT3_5               ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_PMEM_MEMWAIT3_6               ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_PMEM_MEMWAIT3_7               ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_PMEM_MEMHOLD3                 ((uint32_t)0x00FF0000)        /*!<MEMHOLD3[7:0] bits (Common memory 3 hold time) */
+#define  FMC_PMEM_MEMHOLD3_0               ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_PMEM_MEMHOLD3_1               ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_PMEM_MEMHOLD3_2               ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_PMEM_MEMHOLD3_3               ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  FMC_PMEM_MEMHOLD3_4               ((uint32_t)0x00100000)        /*!<Bit 4 */
+#define  FMC_PMEM_MEMHOLD3_5               ((uint32_t)0x00200000)        /*!<Bit 5 */
+#define  FMC_PMEM_MEMHOLD3_6               ((uint32_t)0x00400000)        /*!<Bit 6 */
+#define  FMC_PMEM_MEMHOLD3_7               ((uint32_t)0x00800000)        /*!<Bit 7 */
+
+#define  FMC_PMEM_MEMHIZ3                  ((uint32_t)0xFF000000)        /*!<MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */
+#define  FMC_PMEM_MEMHIZ3_0                ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_PMEM_MEMHIZ3_1                ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_PMEM_MEMHIZ3_2                ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_PMEM_MEMHIZ3_3                ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  FMC_PMEM_MEMHIZ3_4                ((uint32_t)0x10000000)        /*!<Bit 4 */
+#define  FMC_PMEM_MEMHIZ3_5                ((uint32_t)0x20000000)        /*!<Bit 5 */
+#define  FMC_PMEM_MEMHIZ3_6                ((uint32_t)0x40000000)        /*!<Bit 6 */
+#define  FMC_PMEM_MEMHIZ3_7                ((uint32_t)0x80000000)        /*!<Bit 7 */
+
+/******************  Bit definition for FMC_PATT register  ******************/
+#define  FMC_PATT_ATTSET3                  ((uint32_t)0x000000FF)        /*!<ATTSET3[7:0] bits (Attribute memory 3 setup time) */
+#define  FMC_PATT_ATTSET3_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_PATT_ATTSET3_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_PATT_ATTSET3_2                ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_PATT_ATTSET3_3                ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  FMC_PATT_ATTSET3_4                ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  FMC_PATT_ATTSET3_5                ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  FMC_PATT_ATTSET3_6                ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  FMC_PATT_ATTSET3_7                ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  FMC_PATT_ATTWAIT3                 ((uint32_t)0x0000FF00)        /*!<ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */
+#define  FMC_PATT_ATTWAIT3_0               ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_PATT_ATTWAIT3_1               ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_PATT_ATTWAIT3_2               ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_PATT_ATTWAIT3_3               ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  FMC_PATT_ATTWAIT3_4               ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  FMC_PATT_ATTWAIT3_5               ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  FMC_PATT_ATTWAIT3_6               ((uint32_t)0x00004000)        /*!<Bit 6 */
+#define  FMC_PATT_ATTWAIT3_7               ((uint32_t)0x00008000)        /*!<Bit 7 */
+
+#define  FMC_PATT_ATTHOLD3                 ((uint32_t)0x00FF0000)        /*!<ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */
+#define  FMC_PATT_ATTHOLD3_0               ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_PATT_ATTHOLD3_1               ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_PATT_ATTHOLD3_2               ((uint32_t)0x00040000)        /*!<Bit 2 */
+#define  FMC_PATT_ATTHOLD3_3               ((uint32_t)0x00080000)        /*!<Bit 3 */
+#define  FMC_PATT_ATTHOLD3_4               ((uint32_t)0x00100000)        /*!<Bit 4 */
+#define  FMC_PATT_ATTHOLD3_5               ((uint32_t)0x00200000)        /*!<Bit 5 */
+#define  FMC_PATT_ATTHOLD3_6               ((uint32_t)0x00400000)        /*!<Bit 6 */
+#define  FMC_PATT_ATTHOLD3_7               ((uint32_t)0x00800000)        /*!<Bit 7 */
+
+#define  FMC_PATT_ATTHIZ3                  ((uint32_t)0xFF000000)        /*!<ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */
+#define  FMC_PATT_ATTHIZ3_0                ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_PATT_ATTHIZ3_1                ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_PATT_ATTHIZ3_2                ((uint32_t)0x04000000)        /*!<Bit 2 */
+#define  FMC_PATT_ATTHIZ3_3                ((uint32_t)0x08000000)        /*!<Bit 3 */
+#define  FMC_PATT_ATTHIZ3_4                ((uint32_t)0x10000000)        /*!<Bit 4 */
+#define  FMC_PATT_ATTHIZ3_5                ((uint32_t)0x20000000)        /*!<Bit 5 */
+#define  FMC_PATT_ATTHIZ3_6                ((uint32_t)0x40000000)        /*!<Bit 6 */
+#define  FMC_PATT_ATTHIZ3_7                ((uint32_t)0x80000000)        /*!<Bit 7 */
+
+/******************  Bit definition for FMC_ECCR register  ******************/
+#define  FMC_ECCR_ECC3                     ((uint32_t)0xFFFFFFFF)        /*!<ECC result */
+
+/******************  Bit definition for FMC_SDCR1 register  ******************/
+#define  FMC_SDCR1_NC                       ((uint32_t)0x00000003)        /*!<NC[1:0] bits (Number of column bits) */
+#define  FMC_SDCR1_NC_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDCR1_NC_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_NR                       ((uint32_t)0x0000000C)        /*!<NR[1:0] bits (Number of row bits) */
+#define  FMC_SDCR1_NR_0                     ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_SDCR1_NR_1                     ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_MWID                     ((uint32_t)0x00000030)        /*!<NR[1:0] bits (Number of row bits) */
+#define  FMC_SDCR1_MWID_0                   ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_SDCR1_MWID_1                   ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_NB                       ((uint32_t)0x00000040)        /*!<Number of internal bank */
+
+#define  FMC_SDCR1_CAS                      ((uint32_t)0x00000180)        /*!<CAS[1:0] bits (CAS latency) */
+#define  FMC_SDCR1_CAS_0                    ((uint32_t)0x00000080)        /*!<Bit 0 */
+#define  FMC_SDCR1_CAS_1                    ((uint32_t)0x00000100)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_WP                       ((uint32_t)0x00000200)        /*!<Write protection */
+
+#define  FMC_SDCR1_SDCLK                    ((uint32_t)0x00000C00)        /*!<SDRAM clock configuration */
+#define  FMC_SDCR1_SDCLK_0                  ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  FMC_SDCR1_SDCLK_1                  ((uint32_t)0x00000800)        /*!<Bit 1 */
+
+#define  FMC_SDCR1_RBURST                   ((uint32_t)0x00001000)        /*!<Read burst */
+
+#define  FMC_SDCR1_RPIPE                    ((uint32_t)0x00006000)        /*!<Write protection */
+#define  FMC_SDCR1_RPIPE_0                  ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  FMC_SDCR1_RPIPE_1                  ((uint32_t)0x00004000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_SDCR2 register  ******************/
+#define  FMC_SDCR2_NC                       ((uint32_t)0x00000003)        /*!<NC[1:0] bits (Number of column bits) */
+#define  FMC_SDCR2_NC_0                     ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDCR2_NC_1                     ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_NR                       ((uint32_t)0x0000000C)        /*!<NR[1:0] bits (Number of row bits) */
+#define  FMC_SDCR2_NR_0                     ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  FMC_SDCR2_NR_1                     ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_MWID                     ((uint32_t)0x00000030)        /*!<NR[1:0] bits (Number of row bits) */
+#define  FMC_SDCR2_MWID_0                   ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_SDCR2_MWID_1                   ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_NB                       ((uint32_t)0x00000040)        /*!<Number of internal bank */
+
+#define  FMC_SDCR2_CAS                      ((uint32_t)0x00000180)        /*!<CAS[1:0] bits (CAS latency) */
+#define  FMC_SDCR2_CAS_0                    ((uint32_t)0x00000080)        /*!<Bit 0 */
+#define  FMC_SDCR2_CAS_1                    ((uint32_t)0x00000100)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_WP                       ((uint32_t)0x00000200)        /*!<Write protection */
+
+#define  FMC_SDCR2_SDCLK                    ((uint32_t)0x00000C00)        /*!<SDCLK[1:0] (SDRAM clock configuration) */
+#define  FMC_SDCR2_SDCLK_0                  ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  FMC_SDCR2_SDCLK_1                  ((uint32_t)0x00000800)        /*!<Bit 1 */
+
+#define  FMC_SDCR2_RBURST                   ((uint32_t)0x00001000)        /*!<Read burst */
+
+#define  FMC_SDCR2_RPIPE                    ((uint32_t)0x00006000)        /*!<RPIPE[1:0](Read pipe) */
+#define  FMC_SDCR2_RPIPE_0                  ((uint32_t)0x00002000)        /*!<Bit 0 */
+#define  FMC_SDCR2_RPIPE_1                  ((uint32_t)0x00004000)        /*!<Bit 1 */
+
+/******************  Bit definition for FMC_SDTR1 register  ******************/
+#define  FMC_SDTR1_TMRD                     ((uint32_t)0x0000000F)        /*!<TMRD[3:0] bits (Load mode register to active) */
+#define  FMC_SDTR1_TMRD_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDTR1_TMRD_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_SDTR1_TMRD_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_SDTR1_TMRD_3                   ((uint32_t)0x00000008)        /*!<Bit 3 */
+                                            
+#define  FMC_SDTR1_TXSR                     ((uint32_t)0x000000F0)        /*!<TXSR[3:0] bits (Exit self refresh) */
+#define  FMC_SDTR1_TXSR_0                   ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_SDTR1_TXSR_1                   ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_SDTR1_TXSR_2                   ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_SDTR1_TXSR_3                   ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_SDTR1_TRAS                     ((uint32_t)0x00000F00)        /*!<TRAS[3:0] bits (Self refresh time) */
+#define  FMC_SDTR1_TRAS_0                   ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_SDTR1_TRAS_1                   ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_SDTR1_TRAS_2                   ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_SDTR1_TRAS_3                   ((uint32_t)0x00000800)        /*!<Bit 3 */
+
+#define  FMC_SDTR1_TRC                      ((uint32_t)0x0000F000)        /*!<TRC[2:0] bits (Row cycle delay) */
+#define  FMC_SDTR1_TRC_0                    ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  FMC_SDTR1_TRC_1                    ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  FMC_SDTR1_TRC_2                    ((uint32_t)0x00004000)        /*!<Bit 2 */
+
+#define  FMC_SDTR1_TWR                      ((uint32_t)0x000F0000)        /*!<TRC[2:0] bits (Write recovery delay) */
+#define  FMC_SDTR1_TWR_0                    ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_SDTR1_TWR_1                    ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_SDTR1_TWR_2                    ((uint32_t)0x00040000)        /*!<Bit 2 */
+
+#define  FMC_SDTR1_TRP                      ((uint32_t)0x00F00000)        /*!<TRP[2:0] bits (Row precharge delay) */
+#define  FMC_SDTR1_TRP_0                    ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_SDTR1_TRP_1                    ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_SDTR1_TRP_2                    ((uint32_t)0x00400000)        /*!<Bit 2 */
+
+#define  FMC_SDTR1_TRCD                     ((uint32_t)0x0F000000)        /*!<TRP[2:0] bits (Row to column delay) */
+#define  FMC_SDTR1_TRCD_0                   ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_SDTR1_TRCD_1                   ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_SDTR1_TRCD_2                   ((uint32_t)0x04000000)        /*!<Bit 2 */
+
+/******************  Bit definition for FMC_SDTR2 register  ******************/
+#define  FMC_SDTR2_TMRD                     ((uint32_t)0x0000000F)        /*!<TMRD[3:0] bits (Load mode register to active) */
+#define  FMC_SDTR2_TMRD_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDTR2_TMRD_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_SDTR2_TMRD_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  FMC_SDTR2_TMRD_3                   ((uint32_t)0x00000008)        /*!<Bit 3 */
+                                            
+#define  FMC_SDTR2_TXSR                     ((uint32_t)0x000000F0)        /*!<TXSR[3:0] bits (Exit self refresh) */
+#define  FMC_SDTR2_TXSR_0                   ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  FMC_SDTR2_TXSR_1                   ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  FMC_SDTR2_TXSR_2                   ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  FMC_SDTR2_TXSR_3                   ((uint32_t)0x00000080)        /*!<Bit 3 */
+
+#define  FMC_SDTR2_TRAS                     ((uint32_t)0x00000F00)        /*!<TRAS[3:0] bits (Self refresh time) */
+#define  FMC_SDTR2_TRAS_0                   ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  FMC_SDTR2_TRAS_1                   ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  FMC_SDTR2_TRAS_2                   ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  FMC_SDTR2_TRAS_3                   ((uint32_t)0x00000800)        /*!<Bit 3 */
+
+#define  FMC_SDTR2_TRC                      ((uint32_t)0x0000F000)        /*!<TRC[2:0] bits (Row cycle delay) */
+#define  FMC_SDTR2_TRC_0                    ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  FMC_SDTR2_TRC_1                    ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  FMC_SDTR2_TRC_2                    ((uint32_t)0x00004000)        /*!<Bit 2 */
+
+#define  FMC_SDTR2_TWR                      ((uint32_t)0x000F0000)        /*!<TRC[2:0] bits (Write recovery delay) */
+#define  FMC_SDTR2_TWR_0                    ((uint32_t)0x00010000)        /*!<Bit 0 */
+#define  FMC_SDTR2_TWR_1                    ((uint32_t)0x00020000)        /*!<Bit 1 */
+#define  FMC_SDTR2_TWR_2                    ((uint32_t)0x00040000)        /*!<Bit 2 */
+
+#define  FMC_SDTR2_TRP                      ((uint32_t)0x00F00000)        /*!<TRP[2:0] bits (Row precharge delay) */
+#define  FMC_SDTR2_TRP_0                    ((uint32_t)0x00100000)        /*!<Bit 0 */
+#define  FMC_SDTR2_TRP_1                    ((uint32_t)0x00200000)        /*!<Bit 1 */
+#define  FMC_SDTR2_TRP_2                    ((uint32_t)0x00400000)        /*!<Bit 2 */
+
+#define  FMC_SDTR2_TRCD                     ((uint32_t)0x0F000000)        /*!<TRP[2:0] bits (Row to column delay) */
+#define  FMC_SDTR2_TRCD_0                   ((uint32_t)0x01000000)        /*!<Bit 0 */
+#define  FMC_SDTR2_TRCD_1                   ((uint32_t)0x02000000)        /*!<Bit 1 */
+#define  FMC_SDTR2_TRCD_2                   ((uint32_t)0x04000000)        /*!<Bit 2 */
+
+/******************  Bit definition for FMC_SDCMR register  ******************/
+#define  FMC_SDCMR_MODE                     ((uint32_t)0x00000007)        /*!<MODE[2:0] bits (Command mode) */
+#define  FMC_SDCMR_MODE_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  FMC_SDCMR_MODE_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  FMC_SDCMR_MODE_2                   ((uint32_t)0x00000003)        /*!<Bit 2 */
+                                            
+#define  FMC_SDCMR_CTB2                     ((uint32_t)0x00000008)        /*!<Command target 2 */
+
+#define  FMC_SDCMR_CTB1                     ((uint32_t)0x00000010)        /*!<Command target 1 */
+
+#define  FMC_SDCMR_NRFS                     ((uint32_t)0x000001E0)        /*!<NRFS[3:0] bits (Number of auto-refresh) */
+#define  FMC_SDCMR_NRFS_0                   ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  FMC_SDCMR_NRFS_1                   ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  FMC_SDCMR_NRFS_2                   ((uint32_t)0x00000080)        /*!<Bit 2 */
+#define  FMC_SDCMR_NRFS_3                   ((uint32_t)0x00000100)        /*!<Bit 3 */
+
+#define  FMC_SDCMR_MRD                      ((uint32_t)0x003FFE00)        /*!<MRD[12:0] bits (Mode register definition) */
+
+/******************  Bit definition for FMC_SDRTR register  ******************/
+#define  FMC_SDRTR_CRE                      ((uint32_t)0x00000001)        /*!<Clear refresh error flag */
+
+#define  FMC_SDRTR_COUNT                    ((uint32_t)0x00003FFE)        /*!<COUNT[12:0] bits (Refresh timer count) */
+
+#define  FMC_SDRTR_REIE                     ((uint32_t)0x00004000)        /*!<RES interupt enable */
+
+/******************  Bit definition for FMC_SDSR register  ******************/
+#define  FMC_SDSR_RE                        ((uint32_t)0x00000001)        /*!<Refresh error flag */
+
+#define  FMC_SDSR_MODES1                    ((uint32_t)0x00000006)        /*!<MODES1[1:0]bits (Status mode for bank 1) */
+#define  FMC_SDSR_MODES1_0                  ((uint32_t)0x00000002)        /*!<Bit 0 */
+#define  FMC_SDSR_MODES1_1                  ((uint32_t)0x00000004)        /*!<Bit 1 */
+
+#define  FMC_SDSR_MODES2                    ((uint32_t)0x00000018)        /*!<MODES2[1:0]bits (Status mode for bank 2) */
+#define  FMC_SDSR_MODES2_0                  ((uint32_t)0x00000008)        /*!<Bit 0 */
+#define  FMC_SDSR_MODES2_1                  ((uint32_t)0x00000010)        /*!<Bit 1 */
+
+#define  FMC_SDSR_BUSY                      ((uint32_t)0x00000020)        /*!<Busy status */
+
+/******************************************************************************/
+/*                                                                            */
+/*                            General Purpose I/O                             */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bits definition for GPIO_MODER register  *****************/
+#define GPIO_MODER_MODER0                    ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0                  ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1                  ((uint32_t)0x00000002)
+
+#define GPIO_MODER_MODER1                    ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0                  ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1                  ((uint32_t)0x00000008)
+
+#define GPIO_MODER_MODER2                    ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0                  ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1                  ((uint32_t)0x00000020)
+
+#define GPIO_MODER_MODER3                    ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0                  ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1                  ((uint32_t)0x00000080)
+
+#define GPIO_MODER_MODER4                    ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0                  ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1                  ((uint32_t)0x00000200)
+
+#define GPIO_MODER_MODER5                    ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0                  ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1                  ((uint32_t)0x00000800)
+
+#define GPIO_MODER_MODER6                    ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0                  ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1                  ((uint32_t)0x00002000)
+
+#define GPIO_MODER_MODER7                    ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0                  ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1                  ((uint32_t)0x00008000)
+
+#define GPIO_MODER_MODER8                    ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0                  ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1                  ((uint32_t)0x00020000)
+
+#define GPIO_MODER_MODER9                    ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0                  ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1                  ((uint32_t)0x00080000)
+
+#define GPIO_MODER_MODER10                   ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0                 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1                 ((uint32_t)0x00200000)
+
+#define GPIO_MODER_MODER11                   ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0                 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1                 ((uint32_t)0x00800000)
+
+#define GPIO_MODER_MODER12                   ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0                 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1                 ((uint32_t)0x02000000)
+
+#define GPIO_MODER_MODER13                   ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0                 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1                 ((uint32_t)0x08000000)
+
+#define GPIO_MODER_MODER14                   ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0                 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1                 ((uint32_t)0x20000000)
+
+#define GPIO_MODER_MODER15                   ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0                 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1                 ((uint32_t)0x80000000)
+
+/******************  Bits definition for GPIO_OTYPER register  ****************/
+#define GPIO_OTYPER_OT_0                     ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1                     ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2                     ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3                     ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4                     ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5                     ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6                     ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7                     ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8                     ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9                     ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10                    ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11                    ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12                    ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13                    ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14                    ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15                    ((uint32_t)0x00008000)
+
+/******************  Bits definition for GPIO_OSPEEDR register  ***************/
+#define GPIO_OSPEEDER_OSPEEDR0               ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0             ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1             ((uint32_t)0x00000002)
+
+#define GPIO_OSPEEDER_OSPEEDR1               ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0             ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1             ((uint32_t)0x00000008)
+
+#define GPIO_OSPEEDER_OSPEEDR2               ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0             ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1             ((uint32_t)0x00000020)
+
+#define GPIO_OSPEEDER_OSPEEDR3               ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0             ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1             ((uint32_t)0x00000080)
+
+#define GPIO_OSPEEDER_OSPEEDR4               ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0             ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1             ((uint32_t)0x00000200)
+
+#define GPIO_OSPEEDER_OSPEEDR5               ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0             ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1             ((uint32_t)0x00000800)
+
+#define GPIO_OSPEEDER_OSPEEDR6               ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0             ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1             ((uint32_t)0x00002000)
+
+#define GPIO_OSPEEDER_OSPEEDR7               ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0             ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1             ((uint32_t)0x00008000)
+
+#define GPIO_OSPEEDER_OSPEEDR8               ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0             ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1             ((uint32_t)0x00020000)
+
+#define GPIO_OSPEEDER_OSPEEDR9               ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0             ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1             ((uint32_t)0x00080000)
+
+#define GPIO_OSPEEDER_OSPEEDR10              ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0            ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1            ((uint32_t)0x00200000)
+
+#define GPIO_OSPEEDER_OSPEEDR11              ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0            ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1            ((uint32_t)0x00800000)
+
+#define GPIO_OSPEEDER_OSPEEDR12              ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0            ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1            ((uint32_t)0x02000000)
+
+#define GPIO_OSPEEDER_OSPEEDR13              ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0            ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1            ((uint32_t)0x08000000)
+
+#define GPIO_OSPEEDER_OSPEEDR14              ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0            ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1            ((uint32_t)0x20000000)
+
+#define GPIO_OSPEEDER_OSPEEDR15              ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0            ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1            ((uint32_t)0x80000000)
+
+/******************  Bits definition for GPIO_PUPDR register  *****************/
+#define GPIO_PUPDR_PUPDR0                    ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0                  ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1                  ((uint32_t)0x00000002)
+
+#define GPIO_PUPDR_PUPDR1                    ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0                  ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1                  ((uint32_t)0x00000008)
+
+#define GPIO_PUPDR_PUPDR2                    ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0                  ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1                  ((uint32_t)0x00000020)
+
+#define GPIO_PUPDR_PUPDR3                    ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0                  ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1                  ((uint32_t)0x00000080)
+
+#define GPIO_PUPDR_PUPDR4                    ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0                  ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1                  ((uint32_t)0x00000200)
+
+#define GPIO_PUPDR_PUPDR5                    ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0                  ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1                  ((uint32_t)0x00000800)
+
+#define GPIO_PUPDR_PUPDR6                    ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0                  ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1                  ((uint32_t)0x00002000)
+
+#define GPIO_PUPDR_PUPDR7                    ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0                  ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1                  ((uint32_t)0x00008000)
+
+#define GPIO_PUPDR_PUPDR8                    ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0                  ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1                  ((uint32_t)0x00020000)
+
+#define GPIO_PUPDR_PUPDR9                    ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0                  ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1                  ((uint32_t)0x00080000)
+
+#define GPIO_PUPDR_PUPDR10                   ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0                 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1                 ((uint32_t)0x00200000)
+
+#define GPIO_PUPDR_PUPDR11                   ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0                 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1                 ((uint32_t)0x00800000)
+
+#define GPIO_PUPDR_PUPDR12                   ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0                 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1                 ((uint32_t)0x02000000)
+
+#define GPIO_PUPDR_PUPDR13                   ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0                 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1                 ((uint32_t)0x08000000)
+
+#define GPIO_PUPDR_PUPDR14                   ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0                 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1                 ((uint32_t)0x20000000)
+
+#define GPIO_PUPDR_PUPDR15                   ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0                 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1                 ((uint32_t)0x80000000)
+
+/******************  Bits definition for GPIO_IDR register  *******************/
+#define GPIO_IDR_IDR_0                       ((uint32_t)0x00000001)
+#define GPIO_IDR_IDR_1                       ((uint32_t)0x00000002)
+#define GPIO_IDR_IDR_2                       ((uint32_t)0x00000004)
+#define GPIO_IDR_IDR_3                       ((uint32_t)0x00000008)
+#define GPIO_IDR_IDR_4                       ((uint32_t)0x00000010)
+#define GPIO_IDR_IDR_5                       ((uint32_t)0x00000020)
+#define GPIO_IDR_IDR_6                       ((uint32_t)0x00000040)
+#define GPIO_IDR_IDR_7                       ((uint32_t)0x00000080)
+#define GPIO_IDR_IDR_8                       ((uint32_t)0x00000100)
+#define GPIO_IDR_IDR_9                       ((uint32_t)0x00000200)
+#define GPIO_IDR_IDR_10                      ((uint32_t)0x00000400)
+#define GPIO_IDR_IDR_11                      ((uint32_t)0x00000800)
+#define GPIO_IDR_IDR_12                      ((uint32_t)0x00001000)
+#define GPIO_IDR_IDR_13                      ((uint32_t)0x00002000)
+#define GPIO_IDR_IDR_14                      ((uint32_t)0x00004000)
+#define GPIO_IDR_IDR_15                      ((uint32_t)0x00008000)
+
+/******************  Bits definition for GPIO_ODR register  *******************/
+#define GPIO_ODR_ODR_0                       ((uint32_t)0x00000001)
+#define GPIO_ODR_ODR_1                       ((uint32_t)0x00000002)
+#define GPIO_ODR_ODR_2                       ((uint32_t)0x00000004)
+#define GPIO_ODR_ODR_3                       ((uint32_t)0x00000008)
+#define GPIO_ODR_ODR_4                       ((uint32_t)0x00000010)
+#define GPIO_ODR_ODR_5                       ((uint32_t)0x00000020)
+#define GPIO_ODR_ODR_6                       ((uint32_t)0x00000040)
+#define GPIO_ODR_ODR_7                       ((uint32_t)0x00000080)
+#define GPIO_ODR_ODR_8                       ((uint32_t)0x00000100)
+#define GPIO_ODR_ODR_9                       ((uint32_t)0x00000200)
+#define GPIO_ODR_ODR_10                      ((uint32_t)0x00000400)
+#define GPIO_ODR_ODR_11                      ((uint32_t)0x00000800)
+#define GPIO_ODR_ODR_12                      ((uint32_t)0x00001000)
+#define GPIO_ODR_ODR_13                      ((uint32_t)0x00002000)
+#define GPIO_ODR_ODR_14                      ((uint32_t)0x00004000)
+#define GPIO_ODR_ODR_15                      ((uint32_t)0x00008000)
+
+/******************  Bits definition for GPIO_BSRR register  ******************/
+#define GPIO_BSRR_BS_0                       ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1                       ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2                       ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3                       ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4                       ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5                       ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6                       ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7                       ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8                       ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9                       ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10                      ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11                      ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12                      ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13                      ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14                      ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15                      ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0                       ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1                       ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2                       ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3                       ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4                       ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5                       ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6                       ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7                       ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8                       ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9                       ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10                      ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11                      ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12                      ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13                      ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14                      ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15                      ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register *********************/
+#define GPIO_LCKR_LCK0                       ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1                       ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2                       ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3                       ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4                       ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5                       ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6                       ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7                       ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8                       ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9                       ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10                      ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11                      ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12                      ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13                      ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14                      ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15                      ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK                       ((uint32_t)0x00010000)
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                      Inter-integrated Circuit Interface (I2C)              */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for I2C_CR1 register  *******************/
+#define  I2C_CR1_PE                          ((uint32_t)0x00000001)        /*!< Peripheral enable                   */
+#define  I2C_CR1_TXIE                        ((uint32_t)0x00000002)        /*!< TX interrupt enable                 */
+#define  I2C_CR1_RXIE                        ((uint32_t)0x00000004)        /*!< RX interrupt enable                 */
+#define  I2C_CR1_ADDRIE                      ((uint32_t)0x00000008)        /*!< Address match interrupt enable      */
+#define  I2C_CR1_NACKIE                      ((uint32_t)0x00000010)        /*!< NACK received interrupt enable      */
+#define  I2C_CR1_STOPIE                      ((uint32_t)0x00000020)        /*!< STOP detection interrupt enable     */
+#define  I2C_CR1_TCIE                        ((uint32_t)0x00000040)        /*!< Transfer complete interrupt enable  */
+#define  I2C_CR1_ERRIE                       ((uint32_t)0x00000080)        /*!< Errors interrupt enable             */
+#define  I2C_CR1_DNF                         ((uint32_t)0x00000F00)        /*!< Digital noise filter                */
+#define  I2C_CR1_ANFOFF                      ((uint32_t)0x00001000)        /*!< Analog noise filter OFF             */
+#define  I2C_CR1_SWRST                       ((uint32_t)0x00002000)        /*!< Software reset                      */
+#define  I2C_CR1_TXDMAEN                     ((uint32_t)0x00004000)        /*!< DMA transmission requests enable    */
+#define  I2C_CR1_RXDMAEN                     ((uint32_t)0x00008000)        /*!< DMA reception requests enable       */
+#define  I2C_CR1_SBC                         ((uint32_t)0x00010000)        /*!< Slave byte control                  */
+#define  I2C_CR1_NOSTRETCH                   ((uint32_t)0x00020000)        /*!< Clock stretching disable            */
+#define  I2C_CR1_WUPEN                       ((uint32_t)0x00040000)        /*!< Wakeup from STOP enable             */
+#define  I2C_CR1_GCEN                        ((uint32_t)0x00080000)        /*!< General call enable                 */
+#define  I2C_CR1_SMBHEN                      ((uint32_t)0x00100000)        /*!< SMBus host address enable           */
+#define  I2C_CR1_SMBDEN                      ((uint32_t)0x00200000)        /*!< SMBus device default address enable */
+#define  I2C_CR1_ALERTEN                     ((uint32_t)0x00400000)        /*!< SMBus alert enable                  */
+#define  I2C_CR1_PECEN                       ((uint32_t)0x00800000)        /*!< PEC enable                          */
+
+/* Legacy define */
+#define  I2C_CR1_DFN                         I2C_CR1_DNF                   /*!< Digital noise filter                */
+
+/******************  Bit definition for I2C_CR2 register  ********************/
+#define  I2C_CR2_SADD                        ((uint32_t)0x000003FF)        /*!< Slave address (master mode)                             */
+#define  I2C_CR2_RD_WRN                      ((uint32_t)0x00000400)        /*!< Transfer direction (master mode)                        */
+#define  I2C_CR2_ADD10                       ((uint32_t)0x00000800)        /*!< 10-bit addressing mode (master mode)                    */
+#define  I2C_CR2_HEAD10R                     ((uint32_t)0x00001000)        /*!< 10-bit address header only read direction (master mode) */
+#define  I2C_CR2_START                       ((uint32_t)0x00002000)        /*!< START generation                                        */
+#define  I2C_CR2_STOP                        ((uint32_t)0x00004000)        /*!< STOP generation (master mode)                           */
+#define  I2C_CR2_NACK                        ((uint32_t)0x00008000)        /*!< NACK generation (slave mode)                            */
+#define  I2C_CR2_NBYTES                      ((uint32_t)0x00FF0000)        /*!< Number of bytes                                         */
+#define  I2C_CR2_RELOAD                      ((uint32_t)0x01000000)        /*!< NBYTES reload mode                                      */
+#define  I2C_CR2_AUTOEND                     ((uint32_t)0x02000000)        /*!< Automatic end mode (master mode)                        */
+#define  I2C_CR2_PECBYTE                     ((uint32_t)0x04000000)        /*!< Packet error checking byte                              */
+
+/*******************  Bit definition for I2C_OAR1 register  ******************/
+#define  I2C_OAR1_OA1                        ((uint32_t)0x000003FF)        /*!< Interface own address 1   */
+#define  I2C_OAR1_OA1MODE                    ((uint32_t)0x00000400)        /*!< Own address 1 10-bit mode */
+#define  I2C_OAR1_OA1EN                      ((uint32_t)0x00008000)        /*!< Own address 1 enable      */
+
+/*******************  Bit definition for I2C_OAR2 register  ******************/
+#define  I2C_OAR2_OA2                        ((uint32_t)0x000000FE)        /*!< Interface own address 2 */
+#define  I2C_OAR2_OA2MSK                     ((uint32_t)0x00000700)        /*!< Own address 2 masks     */
+#define  I2C_OAR2_OA2NOMASK                  ((uint32_t)0x00000000)        /*!< No mask */
+#define  I2C_OAR2_OA2MASK01                  ((uint32_t)0x00000100)        /*!< OA2[1] is masked, Only OA2[7:2] are compared */
+#define  I2C_OAR2_OA2MASK02                  ((uint32_t)0x00000200)        /*!< OA2[2:1] is masked, Only OA2[7:3] are compared */
+#define  I2C_OAR2_OA2MASK03                  ((uint32_t)0x00000300)        /*!< OA2[3:1] is masked, Only OA2[7:4] are compared */
+#define  I2C_OAR2_OA2MASK04                  ((uint32_t)0x00000400)        /*!< OA2[4:1] is masked, Only OA2[7:5] are compared */
+#define  I2C_OAR2_OA2MASK05                  ((uint32_t)0x00000500)        /*!< OA2[5:1] is masked, Only OA2[7:6] are compared */
+#define  I2C_OAR2_OA2MASK06                  ((uint32_t)0x00000600)        /*!< OA2[6:1] is masked, Only OA2[7] are compared */
+#define  I2C_OAR2_OA2MASK07                  ((uint32_t)0x00000700)        /*!< OA2[7:1] is masked, No comparison is done */
+#define  I2C_OAR2_OA2EN                      ((uint32_t)0x00008000)        /*!< Own address 2 enable    */
+
+/*******************  Bit definition for I2C_TIMINGR register *******************/
+#define  I2C_TIMINGR_SCLL                    ((uint32_t)0x000000FF)        /*!< SCL low period (master mode)  */
+#define  I2C_TIMINGR_SCLH                    ((uint32_t)0x0000FF00)        /*!< SCL high period (master mode) */
+#define  I2C_TIMINGR_SDADEL                  ((uint32_t)0x000F0000)        /*!< Data hold time                */
+#define  I2C_TIMINGR_SCLDEL                  ((uint32_t)0x00F00000)        /*!< Data setup time               */
+#define  I2C_TIMINGR_PRESC                   ((uint32_t)0xF0000000)        /*!< Timings prescaler             */
+
+/******************* Bit definition for I2C_TIMEOUTR register *******************/
+#define  I2C_TIMEOUTR_TIMEOUTA               ((uint32_t)0x00000FFF)        /*!< Bus timeout A                 */
+#define  I2C_TIMEOUTR_TIDLE                  ((uint32_t)0x00001000)        /*!< Idle clock timeout detection  */
+#define  I2C_TIMEOUTR_TIMOUTEN               ((uint32_t)0x00008000)        /*!< Clock timeout enable          */
+#define  I2C_TIMEOUTR_TIMEOUTB               ((uint32_t)0x0FFF0000)        /*!< Bus timeout B                 */
+#define  I2C_TIMEOUTR_TEXTEN                 ((uint32_t)0x80000000)        /*!< Extended clock timeout enable */
+
+/******************  Bit definition for I2C_ISR register  *********************/
+#define  I2C_ISR_TXE                         ((uint32_t)0x00000001)        /*!< Transmit data register empty    */
+#define  I2C_ISR_TXIS                        ((uint32_t)0x00000002)        /*!< Transmit interrupt status       */
+#define  I2C_ISR_RXNE                        ((uint32_t)0x00000004)        /*!< Receive data register not empty */
+#define  I2C_ISR_ADDR                        ((uint32_t)0x00000008)        /*!< Address matched (slave mode)    */
+#define  I2C_ISR_NACKF                       ((uint32_t)0x00000010)        /*!< NACK received flag              */
+#define  I2C_ISR_STOPF                       ((uint32_t)0x00000020)        /*!< STOP detection flag             */
+#define  I2C_ISR_TC                          ((uint32_t)0x00000040)        /*!< Transfer complete (master mode) */
+#define  I2C_ISR_TCR                         ((uint32_t)0x00000080)        /*!< Transfer complete reload        */
+#define  I2C_ISR_BERR                        ((uint32_t)0x00000100)        /*!< Bus error                       */
+#define  I2C_ISR_ARLO                        ((uint32_t)0x00000200)        /*!< Arbitration lost                */
+#define  I2C_ISR_OVR                         ((uint32_t)0x00000400)        /*!< Overrun/Underrun                */
+#define  I2C_ISR_PECERR                      ((uint32_t)0x00000800)        /*!< PEC error in reception          */
+#define  I2C_ISR_TIMEOUT                     ((uint32_t)0x00001000)        /*!< Timeout or Tlow detection flag  */
+#define  I2C_ISR_ALERT                       ((uint32_t)0x00002000)        /*!< SMBus alert                     */
+#define  I2C_ISR_BUSY                        ((uint32_t)0x00008000)        /*!< Bus busy                        */
+#define  I2C_ISR_DIR                         ((uint32_t)0x00010000)        /*!< Transfer direction (slave mode) */
+#define  I2C_ISR_ADDCODE                     ((uint32_t)0x00FE0000)        /*!< Address match code (slave mode) */
+
+/******************  Bit definition for I2C_ICR register  *********************/
+#define  I2C_ICR_ADDRCF                      ((uint32_t)0x00000008)        /*!< Address matched clear flag      */
+#define  I2C_ICR_NACKCF                      ((uint32_t)0x00000010)        /*!< NACK clear flag                 */
+#define  I2C_ICR_STOPCF                      ((uint32_t)0x00000020)        /*!< STOP detection clear flag       */
+#define  I2C_ICR_BERRCF                      ((uint32_t)0x00000100)        /*!< Bus error clear flag            */
+#define  I2C_ICR_ARLOCF                      ((uint32_t)0x00000200)        /*!< Arbitration lost clear flag     */
+#define  I2C_ICR_OVRCF                       ((uint32_t)0x00000400)        /*!< Overrun/Underrun clear flag     */
+#define  I2C_ICR_PECCF                       ((uint32_t)0x00000800)        /*!< PAC error clear flag            */
+#define  I2C_ICR_TIMOUTCF                    ((uint32_t)0x00001000)        /*!< Timeout clear flag              */
+#define  I2C_ICR_ALERTCF                     ((uint32_t)0x00002000)        /*!< Alert clear flag                */
+
+/******************  Bit definition for I2C_PECR register  *********************/
+#define  I2C_PECR_PEC                        ((uint32_t)0x000000FF)        /*!< PEC register        */
+
+/******************  Bit definition for I2C_RXDR register  *********************/
+#define  I2C_RXDR_RXDATA                     ((uint32_t)0x000000FF)        /*!< 8-bit receive data  */
+
+/******************  Bit definition for I2C_TXDR register  *********************/
+#define  I2C_TXDR_TXDATA                     ((uint32_t)0x000000FF)        /*!< 8-bit transmit data */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                           Independent WATCHDOG                             */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for IWDG_KR register  ********************/
+#define  IWDG_KR_KEY                         ((uint32_t)0xFFFF)            /*!<Key value (write only, read 0000h)  */
+
+/*******************  Bit definition for IWDG_PR register  ********************/
+#define  IWDG_PR_PR                          ((uint32_t)0x07)               /*!<PR[2:0] (Prescaler divider)         */
+#define  IWDG_PR_PR_0                        ((uint32_t)0x01)               /*!<Bit 0 */
+#define  IWDG_PR_PR_1                        ((uint32_t)0x02)               /*!<Bit 1 */
+#define  IWDG_PR_PR_2                        ((uint32_t)0x04)               /*!<Bit 2 */
+
+/*******************  Bit definition for IWDG_RLR register  *******************/
+#define  IWDG_RLR_RL                         ((uint32_t)0x0FFF)            /*!<Watchdog counter reload value        */
+
+/*******************  Bit definition for IWDG_SR register  ********************/
+#define  IWDG_SR_PVU                         ((uint32_t)0x01)               /*!< Watchdog prescaler value update */
+#define  IWDG_SR_RVU                         ((uint32_t)0x02)               /*!< Watchdog counter reload value update */
+#define  IWDG_SR_WVU                         ((uint32_t)0x04)               /*!< Watchdog counter window value update */
+
+/*******************  Bit definition for IWDG_KR register  ********************/
+#define  IWDG_WINR_WIN                       ((uint32_t)0x0FFF)             /*!< Watchdog counter window value */
+
+/******************************************************************************/
+/*                                                                            */
+/*                      LCD-TFT Display Controller (LTDC)                     */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for LTDC_SSCR register  *****************/
+
+#define LTDC_SSCR_VSH                       ((uint32_t)0x000007FF)              /*!< Vertical Synchronization Height  */
+#define LTDC_SSCR_HSW                       ((uint32_t)0x0FFF0000)              /*!< Horizontal Synchronization Width */
+
+/********************  Bit definition for LTDC_BPCR register  *****************/
+
+#define LTDC_BPCR_AVBP                      ((uint32_t)0x000007FF)              /*!< Accumulated Vertical Back Porch   */
+#define LTDC_BPCR_AHBP                      ((uint32_t)0x0FFF0000)              /*!< Accumulated Horizontal Back Porch */
+
+/********************  Bit definition for LTDC_AWCR register  *****************/
+
+#define LTDC_AWCR_AAH                       ((uint32_t)0x000007FF)              /*!< Accumulated Active heigh */
+#define LTDC_AWCR_AAW                       ((uint32_t)0x0FFF0000)              /*!< Accumulated Active Width */
+
+/********************  Bit definition for LTDC_TWCR register  *****************/
+
+#define LTDC_TWCR_TOTALH                    ((uint32_t)0x000007FF)              /*!< Total Heigh */
+#define LTDC_TWCR_TOTALW                    ((uint32_t)0x0FFF0000)              /*!< Total Width */
+
+/********************  Bit definition for LTDC_GCR register  ******************/
+
+#define LTDC_GCR_LTDCEN                     ((uint32_t)0x00000001)              /*!< LCD-TFT controller enable bit       */
+#define LTDC_GCR_DBW                        ((uint32_t)0x00000070)              /*!< Dither Blue Width                   */
+#define LTDC_GCR_DGW                        ((uint32_t)0x00000700)              /*!< Dither Green Width                  */
+#define LTDC_GCR_DRW                        ((uint32_t)0x00007000)              /*!< Dither Red Width                    */
+#define LTDC_GCR_DTEN                       ((uint32_t)0x00010000)              /*!< Dither Enable                       */
+#define LTDC_GCR_PCPOL                      ((uint32_t)0x10000000)              /*!< Pixel Clock Polarity                */
+#define LTDC_GCR_DEPOL                      ((uint32_t)0x20000000)              /*!< Data Enable Polarity                */
+#define LTDC_GCR_VSPOL                      ((uint32_t)0x40000000)              /*!< Vertical Synchronization Polarity   */
+#define LTDC_GCR_HSPOL                      ((uint32_t)0x80000000)              /*!< Horizontal Synchronization Polarity */
+
+/********************  Bit definition for LTDC_SRCR register  *****************/
+
+#define LTDC_SRCR_IMR                      ((uint32_t)0x00000001)               /*!< Immediate Reload         */
+#define LTDC_SRCR_VBR                      ((uint32_t)0x00000002)               /*!< Vertical Blanking Reload */
+
+/********************  Bit definition for LTDC_BCCR register  *****************/
+
+#define LTDC_BCCR_BCBLUE                    ((uint32_t)0x000000FF)              /*!< Background Blue value  */
+#define LTDC_BCCR_BCGREEN                   ((uint32_t)0x0000FF00)              /*!< Background Green value */
+#define LTDC_BCCR_BCRED                     ((uint32_t)0x00FF0000)              /*!< Background Red value   */
+
+/********************  Bit definition for LTDC_IER register  ******************/
+
+#define LTDC_IER_LIE                        ((uint32_t)0x00000001)              /*!< Line Interrupt Enable            */
+#define LTDC_IER_FUIE                       ((uint32_t)0x00000002)              /*!< FIFO Underrun Interrupt Enable   */
+#define LTDC_IER_TERRIE                     ((uint32_t)0x00000004)              /*!< Transfer Error Interrupt Enable  */
+#define LTDC_IER_RRIE                       ((uint32_t)0x00000008)              /*!< Register Reload interrupt enable */
+
+/********************  Bit definition for LTDC_ISR register  ******************/
+
+#define LTDC_ISR_LIF                        ((uint32_t)0x00000001)              /*!< Line Interrupt Flag */
+#define LTDC_ISR_FUIF                       ((uint32_t)0x00000002)              /*!< FIFO Underrun Interrupt Flag */
+#define LTDC_ISR_TERRIF                     ((uint32_t)0x00000004)              /*!< Transfer Error Interrupt Flag */
+#define LTDC_ISR_RRIF                       ((uint32_t)0x00000008)              /*!< Register Reload interrupt Flag */
+
+/********************  Bit definition for LTDC_ICR register  ******************/
+
+#define LTDC_ICR_CLIF                       ((uint32_t)0x00000001)              /*!< Clears the Line Interrupt Flag */
+#define LTDC_ICR_CFUIF                      ((uint32_t)0x00000002)              /*!< Clears the FIFO Underrun Interrupt Flag */
+#define LTDC_ICR_CTERRIF                    ((uint32_t)0x00000004)              /*!< Clears the Transfer Error Interrupt Flag */
+#define LTDC_ICR_CRRIF                      ((uint32_t)0x00000008)              /*!< Clears Register Reload interrupt Flag */
+
+/********************  Bit definition for LTDC_LIPCR register  ****************/
+
+#define LTDC_LIPCR_LIPOS                    ((uint32_t)0x000007FF)              /*!< Line Interrupt Position */
+
+/********************  Bit definition for LTDC_CPSR register  *****************/
+
+#define LTDC_CPSR_CYPOS                     ((uint32_t)0x0000FFFF)              /*!< Current Y Position */
+#define LTDC_CPSR_CXPOS                     ((uint32_t)0xFFFF0000)              /*!< Current X Position */
+
+/********************  Bit definition for LTDC_CDSR register  *****************/
+
+#define LTDC_CDSR_VDES                      ((uint32_t)0x00000001)              /*!< Vertical Data Enable Status       */
+#define LTDC_CDSR_HDES                      ((uint32_t)0x00000002)              /*!< Horizontal Data Enable Status     */
+#define LTDC_CDSR_VSYNCS                    ((uint32_t)0x00000004)              /*!< Vertical Synchronization Status   */
+#define LTDC_CDSR_HSYNCS                    ((uint32_t)0x00000008)              /*!< Horizontal Synchronization Status */
+
+/********************  Bit definition for LTDC_LxCR register  *****************/
+
+#define LTDC_LxCR_LEN                       ((uint32_t)0x00000001)              /*!< Layer Enable              */
+#define LTDC_LxCR_COLKEN                    ((uint32_t)0x00000002)              /*!< Color Keying Enable       */
+#define LTDC_LxCR_CLUTEN                    ((uint32_t)0x00000010)              /*!< Color Lockup Table Enable */
+
+/********************  Bit definition for LTDC_LxWHPCR register  **************/
+
+#define LTDC_LxWHPCR_WHSTPOS                ((uint32_t)0x00000FFF)              /*!< Window Horizontal Start Position */
+#define LTDC_LxWHPCR_WHSPPOS                ((uint32_t)0xFFFF0000)              /*!< Window Horizontal Stop Position  */
+
+/********************  Bit definition for LTDC_LxWVPCR register  **************/
+
+#define LTDC_LxWVPCR_WVSTPOS                ((uint32_t)0x00000FFF)              /*!< Window Vertical Start Position */
+#define LTDC_LxWVPCR_WVSPPOS                ((uint32_t)0xFFFF0000)              /*!< Window Vertical Stop Position  */
+
+/********************  Bit definition for LTDC_LxCKCR register  ***************/
+
+#define LTDC_LxCKCR_CKBLUE                  ((uint32_t)0x000000FF)              /*!< Color Key Blue value  */
+#define LTDC_LxCKCR_CKGREEN                 ((uint32_t)0x0000FF00)              /*!< Color Key Green value */
+#define LTDC_LxCKCR_CKRED                   ((uint32_t)0x00FF0000)              /*!< Color Key Red value   */
+
+/********************  Bit definition for LTDC_LxPFCR register  ***************/
+
+#define LTDC_LxPFCR_PF                      ((uint32_t)0x00000007)              /*!< Pixel Format */
+
+/********************  Bit definition for LTDC_LxCACR register  ***************/
+
+#define LTDC_LxCACR_CONSTA                  ((uint32_t)0x000000FF)              /*!< Constant Alpha */
+
+/********************  Bit definition for LTDC_LxDCCR register  ***************/
+
+#define LTDC_LxDCCR_DCBLUE                  ((uint32_t)0x000000FF)              /*!< Default Color Blue  */
+#define LTDC_LxDCCR_DCGREEN                 ((uint32_t)0x0000FF00)              /*!< Default Color Green */
+#define LTDC_LxDCCR_DCRED                   ((uint32_t)0x00FF0000)              /*!< Default Color Red   */
+#define LTDC_LxDCCR_DCALPHA                 ((uint32_t)0xFF000000)              /*!< Default Color Alpha */
+                                
+/********************  Bit definition for LTDC_LxBFCR register  ***************/
+
+#define LTDC_LxBFCR_BF2                     ((uint32_t)0x00000007)              /*!< Blending Factor 2 */
+#define LTDC_LxBFCR_BF1                     ((uint32_t)0x00000700)              /*!< Blending Factor 1 */
+
+/********************  Bit definition for LTDC_LxCFBAR register  **************/
+
+#define LTDC_LxCFBAR_CFBADD                 ((uint32_t)0xFFFFFFFF)              /*!< Color Frame Buffer Start Address */
+
+/********************  Bit definition for LTDC_LxCFBLR register  **************/
+
+#define LTDC_LxCFBLR_CFBLL                  ((uint32_t)0x00001FFF)              /*!< Color Frame Buffer Line Length    */
+#define LTDC_LxCFBLR_CFBP                   ((uint32_t)0x1FFF0000)              /*!< Color Frame Buffer Pitch in bytes */
+
+/********************  Bit definition for LTDC_LxCFBLNR register  *************/
+
+#define LTDC_LxCFBLNR_CFBLNBR               ((uint32_t)0x000007FF)              /*!< Frame Buffer Line Number */
+
+/********************  Bit definition for LTDC_LxCLUTWR register  *************/
+
+#define LTDC_LxCLUTWR_BLUE                  ((uint32_t)0x000000FF)              /*!< Blue value   */
+#define LTDC_LxCLUTWR_GREEN                 ((uint32_t)0x0000FF00)              /*!< Green value  */
+#define LTDC_LxCLUTWR_RED                   ((uint32_t)0x00FF0000)              /*!< Red value    */
+#define LTDC_LxCLUTWR_CLUTADD               ((uint32_t)0xFF000000)              /*!< CLUT address */
+
+/******************************************************************************/
+/*                                                                            */
+/*                             Power Control                                  */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for PWR_CR1 register  ********************/
+#define  PWR_CR1_LPDS                         ((uint32_t)0x00000001)     /*!< Low-Power Deepsleep                 */
+#define  PWR_CR1_PDDS                         ((uint32_t)0x00000002)     /*!< Power Down Deepsleep                */
+#define  PWR_CR1_CSBF                         ((uint32_t)0x00000008)     /*!< Clear Standby Flag                  */
+#define  PWR_CR1_PVDE                         ((uint32_t)0x00000010)     /*!< Power Voltage Detector Enable       */
+
+#define  PWR_CR1_PLS                          ((uint32_t)0x000000E0)     /*!< PLS[2:0] bits (PVD Level Selection) */
+#define  PWR_CR1_PLS_0                        ((uint32_t)0x00000020)     /*!< Bit 0 */
+#define  PWR_CR1_PLS_1                        ((uint32_t)0x00000040)     /*!< Bit 1 */
+#define  PWR_CR1_PLS_2                        ((uint32_t)0x00000080)     /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define  PWR_CR1_PLS_LEV0                     ((uint32_t)0x00000000)     /*!< PVD level 0 */
+#define  PWR_CR1_PLS_LEV1                     ((uint32_t)0x00000020)     /*!< PVD level 1 */
+#define  PWR_CR1_PLS_LEV2                     ((uint32_t)0x00000040)     /*!< PVD level 2 */
+#define  PWR_CR1_PLS_LEV3                     ((uint32_t)0x00000060)     /*!< PVD level 3 */
+#define  PWR_CR1_PLS_LEV4                     ((uint32_t)0x00000080)     /*!< PVD level 4 */
+#define  PWR_CR1_PLS_LEV5                     ((uint32_t)0x000000A0)     /*!< PVD level 5 */
+#define  PWR_CR1_PLS_LEV6                     ((uint32_t)0x000000C0)     /*!< PVD level 6 */
+#define  PWR_CR1_PLS_LEV7                     ((uint32_t)0x000000E0)     /*!< PVD level 7 */
+
+#define  PWR_CR1_DBP                          ((uint32_t)0x00000100)     /*!< Disable Backup Domain write protection                     */
+#define  PWR_CR1_FPDS                         ((uint32_t)0x00000200)     /*!< Flash power down in Stop mode                              */
+
+#define  PWR_CR1_LPUDS                        ((uint32_t)0x00000400)     /*!< Low-power regulator in deepsleep under-drive mode          */
+#define  PWR_CR1_MRUDS                        ((uint32_t)0x00000800)     /*!< Main regulator in deepsleep under-drive mode               */
+
+#define  PWR_CR1_ADCDC1                       ((uint32_t)0x00002000)     /*!< Refer to AN4073 on how to use this bit */ 
+
+#define  PWR_CR1_VOS                          ((uint32_t)0x0000C000)     /*!< VOS[1:0] bits (Regulator voltage scaling output selection) */
+#define  PWR_CR1_VOS_0                        ((uint32_t)0x00004000)     /*!< Bit 0 */
+#define  PWR_CR1_VOS_1                        ((uint32_t)0x00008000)     /*!< Bit 1 */
+
+#define  PWR_CR1_ODEN                         ((uint32_t)0x00010000)     /*!< Over Drive enable                   */
+#define  PWR_CR1_ODSWEN                       ((uint32_t)0x00020000)     /*!< Over Drive switch enabled           */
+#define  PWR_CR1_UDEN                         ((uint32_t)0x000C0000)     /*!< Under Drive enable in stop mode     */
+#define  PWR_CR1_UDEN_0                       ((uint32_t)0x00040000)     /*!< Bit 0                               */
+#define  PWR_CR1_UDEN_1                       ((uint32_t)0x00080000)     /*!< Bit 1                               */
+
+/*******************  Bit definition for PWR_CSR1 register  ********************/
+#define  PWR_CSR1_WUIF                        ((uint32_t)0x00000001)     /*!< Wake up internal Flag                            */
+#define  PWR_CSR1_SBF                         ((uint32_t)0x00000002)     /*!< Standby Flag                                     */
+#define  PWR_CSR1_PVDO                        ((uint32_t)0x00000004)     /*!< PVD Output                                       */
+#define  PWR_CSR1_BRR                         ((uint32_t)0x00000008)     /*!< Backup regulator ready                           */
+#define  PWR_CSR1_BRE                         ((uint32_t)0x00000200)     /*!< Backup regulator enable                          */
+#define  PWR_CSR1_VOSRDY                      ((uint32_t)0x00004000)     /*!< Regulator voltage scaling output selection ready */
+
+#define  PWR_CSR1_ODRDY                       ((uint32_t)0x00010000)     /*!< Over Drive generator ready                       */
+#define  PWR_CSR1_ODSWRDY                     ((uint32_t)0x00020000)     /*!< Over Drive Switch ready                          */
+#define  PWR_CSR1_UDSWRDY                     ((uint32_t)0x000C0000)     /*!< Under Drive ready                                */
+
+/********************  Bit definition for PWR_CR2 register  ********************/
+#define  PWR_CR2_CWUPF1                         ((uint32_t)0x00000001)     /*!< Clear Wakeup Pin Flag for PA0      */
+#define  PWR_CR2_CWUPF2                         ((uint32_t)0x00000002)     /*!< Clear Wakeup Pin Flag for PA2      */
+#define  PWR_CR2_CWUPF3                         ((uint32_t)0x00000004)     /*!< Clear Wakeup Pin Flag for PC1      */
+#define  PWR_CR2_CWUPF4                         ((uint32_t)0x00000008)     /*!< Clear Wakeup Pin Flag for PC13     */
+#define  PWR_CR2_CWUPF5                         ((uint32_t)0x00000010)     /*!< Clear Wakeup Pin Flag for PI8      */
+#define  PWR_CR2_CWUPF6                         ((uint32_t)0x00000020)     /*!< Clear Wakeup Pin Flag for PI11     */
+
+#define  PWR_CR2_WUPP1                          ((uint32_t)0x00000100)     /*!< Wakeup Pin Polarity bit for PA0    */
+#define  PWR_CR2_WUPP2                          ((uint32_t)0x00000200)     /*!< Wakeup Pin Polarity bit for PA2    */
+#define  PWR_CR2_WUPP3                          ((uint32_t)0x00000400)     /*!< Wakeup Pin Polarity bit for PC1    */
+#define  PWR_CR2_WUPP4                          ((uint32_t)0x00000800)     /*!< Wakeup Pin Polarity bit for PC13   */
+#define  PWR_CR2_WUPP5                          ((uint32_t)0x00001000)     /*!< Wakeup Pin Polarity bit for PI8    */
+#define  PWR_CR2_WUPP6                          ((uint32_t)0x00002000)     /*!< Wakeup Pin Polarity bit for PI11   */
+
+/*******************  Bit definition for PWR_CSR2 register  ********************/
+#define  PWR_CSR2_WUPF1                         ((uint32_t)0x00000001)     /*!< Wakeup Pin Flag for PA0            */
+#define  PWR_CSR2_WUPF2                         ((uint32_t)0x00000002)     /*!< Wakeup Pin Flag for PA2            */
+#define  PWR_CSR2_WUPF3                         ((uint32_t)0x00000004)     /*!< Wakeup Pin Flag for PC1            */
+#define  PWR_CSR2_WUPF4                         ((uint32_t)0x00000008)     /*!< Wakeup Pin Flag for PC13           */
+#define  PWR_CSR2_WUPF5                         ((uint32_t)0x00000010)     /*!< Wakeup Pin Flag for PI8            */
+#define  PWR_CSR2_WUPF6                         ((uint32_t)0x00000020)     /*!< Wakeup Pin Flag for PI11           */
+
+#define  PWR_CSR2_EWUP1                         ((uint32_t)0x00000100)     /*!< Enable Wakeup Pin PA0              */
+#define  PWR_CSR2_EWUP2                         ((uint32_t)0x00000200)     /*!< Enable Wakeup Pin PA2              */
+#define  PWR_CSR2_EWUP3                         ((uint32_t)0x00000400)     /*!< Enable Wakeup Pin PC1              */
+#define  PWR_CSR2_EWUP4                         ((uint32_t)0x00000800)     /*!< Enable Wakeup Pin PC13             */
+#define  PWR_CSR2_EWUP5                         ((uint32_t)0x00001000)     /*!< Enable Wakeup Pin PI8              */
+#define  PWR_CSR2_EWUP6                         ((uint32_t)0x00002000)     /*!< Enable Wakeup Pin PI11             */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    QUADSPI                                 */
+/*                                                                            */
+/******************************************************************************/
+/*****************  Bit definition for QUADSPI_CR register  *******************/
+#define  QUADSPI_CR_EN                           ((uint32_t)0x00000001)            /*!< Enable                            */
+#define  QUADSPI_CR_ABORT                        ((uint32_t)0x00000002)            /*!< Abort request                     */
+#define  QUADSPI_CR_DMAEN                        ((uint32_t)0x00000004)            /*!< DMA Enable                        */
+#define  QUADSPI_CR_TCEN                         ((uint32_t)0x00000008)            /*!< Timeout Counter Enable            */
+#define  QUADSPI_CR_SSHIFT                       ((uint32_t)0x00000010)            /*!< Sample Shift                      */
+#define  QUADSPI_CR_DFM                          ((uint32_t)0x00000040)            /*!< Dual Flash Mode                   */
+#define  QUADSPI_CR_FSEL                         ((uint32_t)0x00000080)            /*!< Flash Select                      */
+#define  QUADSPI_CR_FTHRES                       ((uint32_t)0x00000F00)            /*!< FTHRES[3:0] FIFO Level            */
+#define  QUADSPI_CR_FTHRES_0                     ((uint32_t)0x00000100)            /*!< Bit 0 */
+#define  QUADSPI_CR_FTHRES_1                     ((uint32_t)0x00000200)            /*!< Bit 1 */
+#define  QUADSPI_CR_FTHRES_2                     ((uint32_t)0x00000400)            /*!< Bit 2 */
+#define  QUADSPI_CR_FTHRES_3                     ((uint32_t)0x00000800)            /*!< Bit 3 */
+#define  QUADSPI_CR_TEIE                         ((uint32_t)0x00010000)            /*!< Transfer Error Interrupt Enable    */
+#define  QUADSPI_CR_TCIE                         ((uint32_t)0x00020000)            /*!< Transfer Complete Interrupt Enable */
+#define  QUADSPI_CR_FTIE                         ((uint32_t)0x00040000)            /*!< FIFO Threshold Interrupt Enable    */
+#define  QUADSPI_CR_SMIE                         ((uint32_t)0x00080000)            /*!< Status Match Interrupt Enable      */
+#define  QUADSPI_CR_TOIE                         ((uint32_t)0x00100000)            /*!< TimeOut Interrupt Enable           */
+#define  QUADSPI_CR_APMS                         ((uint32_t)0x00400000)            /*!< Bit 1                              */
+#define  QUADSPI_CR_PMM                          ((uint32_t)0x00800000)            /*!< Polling Match Mode                 */
+#define  QUADSPI_CR_PRESCALER                    ((uint32_t)0xFF000000)            /*!< PRESCALER[7:0] Clock prescaler     */
+#define  QUADSPI_CR_PRESCALER_0                  ((uint32_t)0x01000000)            /*!< Bit 0 */
+#define  QUADSPI_CR_PRESCALER_1                  ((uint32_t)0x02000000)            /*!< Bit 1 */
+#define  QUADSPI_CR_PRESCALER_2                  ((uint32_t)0x04000000)            /*!< Bit 2 */
+#define  QUADSPI_CR_PRESCALER_3                  ((uint32_t)0x08000000)            /*!< Bit 3 */
+#define  QUADSPI_CR_PRESCALER_4                  ((uint32_t)0x10000000)            /*!< Bit 4 */
+#define  QUADSPI_CR_PRESCALER_5                  ((uint32_t)0x20000000)            /*!< Bit 5 */
+#define  QUADSPI_CR_PRESCALER_6                  ((uint32_t)0x40000000)            /*!< Bit 6 */
+#define  QUADSPI_CR_PRESCALER_7                  ((uint32_t)0x80000000)            /*!< Bit 7 */
+
+/*****************  Bit definition for QUADSPI_DCR register  ******************/
+#define  QUADSPI_DCR_CKMODE                      ((uint32_t)0x00000001)            /*!< Mode 0 / Mode 3                 */
+#define  QUADSPI_DCR_CSHT                        ((uint32_t)0x00000700)            /*!< CSHT[2:0]: ChipSelect High Time */
+#define  QUADSPI_DCR_CSHT_0                      ((uint32_t)0x00000100)            /*!< Bit 0 */
+#define  QUADSPI_DCR_CSHT_1                      ((uint32_t)0x00000200)            /*!< Bit 1 */
+#define  QUADSPI_DCR_CSHT_2                      ((uint32_t)0x00000400)            /*!< Bit 2 */
+#define  QUADSPI_DCR_FSIZE                       ((uint32_t)0x001F0000)            /*!< FSIZE[4:0]: Flash Size          */
+#define  QUADSPI_DCR_FSIZE_0                     ((uint32_t)0x00010000)            /*!< Bit 0 */
+#define  QUADSPI_DCR_FSIZE_1                     ((uint32_t)0x00020000)            /*!< Bit 1 */
+#define  QUADSPI_DCR_FSIZE_2                     ((uint32_t)0x00040000)            /*!< Bit 2 */
+#define  QUADSPI_DCR_FSIZE_3                     ((uint32_t)0x00080000)            /*!< Bit 3 */
+#define  QUADSPI_DCR_FSIZE_4                     ((uint32_t)0x00100000)            /*!< Bit 4 */
+
+/******************  Bit definition for QUADSPI_SR register  *******************/
+#define  QUADSPI_SR_TEF                          ((uint32_t)0x00000001)             /*!< Transfer Error Flag    */
+#define  QUADSPI_SR_TCF                          ((uint32_t)0x00000002)             /*!< Transfer Complete Flag */
+#define  QUADSPI_SR_FTF                          ((uint32_t)0x00000004)             /*!< FIFO Threshlod Flag    */
+#define  QUADSPI_SR_SMF                          ((uint32_t)0x00000008)             /*!< Status Match Flag      */
+#define  QUADSPI_SR_TOF                          ((uint32_t)0x00000010)             /*!< Timeout Flag           */
+#define  QUADSPI_SR_BUSY                         ((uint32_t)0x00000020)             /*!< Busy                   */
+#define  QUADSPI_SR_FLEVEL                       ((uint32_t)0x00001F00)             /*!< FIFO Threshlod Flag    */
+#define  QUADSPI_SR_FLEVEL_0                     ((uint32_t)0x00000100)             /*!< Bit 0 */
+#define  QUADSPI_SR_FLEVEL_1                     ((uint32_t)0x00000200)             /*!< Bit 1 */
+#define  QUADSPI_SR_FLEVEL_2                     ((uint32_t)0x00000400)             /*!< Bit 2 */
+#define  QUADSPI_SR_FLEVEL_3                     ((uint32_t)0x00000800)             /*!< Bit 3 */
+#define  QUADSPI_SR_FLEVEL_4                     ((uint32_t)0x00001000)             /*!< Bit 4 */
+
+/******************  Bit definition for QUADSPI_FCR register  ******************/
+#define  QUADSPI_FCR_CTEF                        ((uint32_t)0x00000001)             /*!< Clear Transfer Error Flag    */
+#define  QUADSPI_FCR_CTCF                        ((uint32_t)0x00000002)             /*!< Clear Transfer Complete Flag */
+#define  QUADSPI_FCR_CSMF                        ((uint32_t)0x00000008)             /*!< Clear Status Match Flag      */
+#define  QUADSPI_FCR_CTOF                        ((uint32_t)0x00000010)             /*!< Clear Timeout Flag           */
+
+/******************  Bit definition for QUADSPI_DLR register  ******************/
+#define  QUADSPI_DLR_DL                        ((uint32_t)0xFFFFFFFF)               /*!< DL[31:0]: Data Length */
+
+/******************  Bit definition for QUADSPI_CCR register  ******************/
+#define  QUADSPI_CCR_INSTRUCTION                  ((uint32_t)0x000000FF)            /*!< INSTRUCTION[7:0]: Instruction    */
+#define  QUADSPI_CCR_INSTRUCTION_0                ((uint32_t)0x00000001)            /*!< Bit 0 */
+#define  QUADSPI_CCR_INSTRUCTION_1                ((uint32_t)0x00000002)            /*!< Bit 1 */
+#define  QUADSPI_CCR_INSTRUCTION_2                ((uint32_t)0x00000004)            /*!< Bit 2 */
+#define  QUADSPI_CCR_INSTRUCTION_3                ((uint32_t)0x00000008)            /*!< Bit 3 */
+#define  QUADSPI_CCR_INSTRUCTION_4                ((uint32_t)0x00000010)            /*!< Bit 4 */
+#define  QUADSPI_CCR_INSTRUCTION_5                ((uint32_t)0x00000020)            /*!< Bit 5 */
+#define  QUADSPI_CCR_INSTRUCTION_6                ((uint32_t)0x00000040)            /*!< Bit 6 */
+#define  QUADSPI_CCR_INSTRUCTION_7                ((uint32_t)0x00000080)            /*!< Bit 7 */
+#define  QUADSPI_CCR_IMODE                        ((uint32_t)0x00000300)            /*!< IMODE[1:0]: Instruction Mode      */
+#define  QUADSPI_CCR_IMODE_0                      ((uint32_t)0x00000100)            /*!< Bit 0 */
+#define  QUADSPI_CCR_IMODE_1                      ((uint32_t)0x00000200)            /*!< Bit 1 */
+#define  QUADSPI_CCR_ADMODE                       ((uint32_t)0x00000C00)            /*!< ADMODE[1:0]: Address Mode         */
+#define  QUADSPI_CCR_ADMODE_0                     ((uint32_t)0x00000400)            /*!< Bit 0 */
+#define  QUADSPI_CCR_ADMODE_1                     ((uint32_t)0x00000800)            /*!< Bit 1 */
+#define  QUADSPI_CCR_ADSIZE                       ((uint32_t)0x00003000)            /*!< ADSIZE[1:0]: Address Size         */
+#define  QUADSPI_CCR_ADSIZE_0                     ((uint32_t)0x00001000)            /*!< Bit 0 */
+#define  QUADSPI_CCR_ADSIZE_1                     ((uint32_t)0x00002000)            /*!< Bit 1 */
+#define  QUADSPI_CCR_ABMODE                       ((uint32_t)0x0000C000)            /*!< ABMODE[1:0]: Alternate Bytes Mode */
+#define  QUADSPI_CCR_ABMODE_0                     ((uint32_t)0x00004000)            /*!< Bit 0 */
+#define  QUADSPI_CCR_ABMODE_1                     ((uint32_t)0x00008000)            /*!< Bit 1 */
+#define  QUADSPI_CCR_ABSIZE                       ((uint32_t)0x00030000)            /*!< ABSIZE[1:0]: Instruction Mode     */
+#define  QUADSPI_CCR_ABSIZE_0                     ((uint32_t)0x00010000)            /*!< Bit 0 */
+#define  QUADSPI_CCR_ABSIZE_1                     ((uint32_t)0x00020000)            /*!< Bit 1 */
+#define  QUADSPI_CCR_DCYC                         ((uint32_t)0x007C0000)            /*!< DCYC[4:0]: Dummy Cycles           */
+#define  QUADSPI_CCR_DCYC_0                       ((uint32_t)0x00040000)            /*!< Bit 0 */
+#define  QUADSPI_CCR_DCYC_1                       ((uint32_t)0x00080000)            /*!< Bit 1 */
+#define  QUADSPI_CCR_DCYC_2                       ((uint32_t)0x00100000)            /*!< Bit 2 */
+#define  QUADSPI_CCR_DCYC_3                       ((uint32_t)0x00200000)            /*!< Bit 3 */
+#define  QUADSPI_CCR_DCYC_4                       ((uint32_t)0x00400000)            /*!< Bit 4 */
+#define  QUADSPI_CCR_DMODE                        ((uint32_t)0x03000000)            /*!< DMODE[1:0]: Data Mode              */
+#define  QUADSPI_CCR_DMODE_0                      ((uint32_t)0x01000000)            /*!< Bit 0 */
+#define  QUADSPI_CCR_DMODE_1                      ((uint32_t)0x02000000)            /*!< Bit 1 */
+#define  QUADSPI_CCR_FMODE                        ((uint32_t)0x0C000000)            /*!< FMODE[1:0]: Functional Mode        */
+#define  QUADSPI_CCR_FMODE_0                      ((uint32_t)0x04000000)            /*!< Bit 0 */
+#define  QUADSPI_CCR_FMODE_1                      ((uint32_t)0x08000000)            /*!< Bit 1 */
+#define  QUADSPI_CCR_SIOO                         ((uint32_t)0x10000000)            /*!< SIOO: Send Instruction Only Once Mode */
+#define  QUADSPI_CCR_DHHC                         ((uint32_t)0x40000000)            /*!< DHHC: Delay Half Hclk Cycle           */
+#define  QUADSPI_CCR_DDRM                         ((uint32_t)0x80000000)            /*!< DDRM: Double Data Rate Mode           */ 
+/******************  Bit definition for QUADSPI_AR register  *******************/
+#define  QUADSPI_AR_ADDRESS                       ((uint32_t)0xFFFFFFFF)            /*!< ADDRESS[31:0]: Address */
+
+/******************  Bit definition for QUADSPI_ABR register  ******************/
+#define  QUADSPI_ABR_ALTERNATE                    ((uint32_t)0xFFFFFFFF)            /*!< ALTERNATE[31:0]: Alternate Bytes */
+
+/******************  Bit definition for QUADSPI_DR register  *******************/
+#define  QUADSPI_DR_DATA                          ((uint32_t)0xFFFFFFFF)            /*!< DATA[31:0]: Data */
+
+/******************  Bit definition for QUADSPI_PSMKR register  ****************/
+#define  QUADSPI_PSMKR_MASK                       ((uint32_t)0xFFFFFFFF)            /*!< MASK[31:0]: Status Mask */
+
+/******************  Bit definition for QUADSPI_PSMAR register  ****************/
+#define  QUADSPI_PSMAR_MATCH                      ((uint32_t)0xFFFFFFFF)            /*!< MATCH[31:0]: Status Match */
+
+/******************  Bit definition for QUADSPI_PIR register  *****************/
+#define  QUADSPI_PIR_INTERVAL                     ((uint32_t)0x0000FFFF)            /*!< INTERVAL[15:0]: Polling Interval */
+
+/******************  Bit definition for QUADSPI_LPTR register  *****************/
+#define  QUADSPI_LPTR_TIMEOUT                     ((uint32_t)0x0000FFFF)            /*!< TIMEOUT[15:0]: Timeout period */
+
+/******************************************************************************/
+/*                                                                            */
+/*                         Reset and Clock Control            */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for RCC_CR register  ********************/
+#define  RCC_CR_HSION                        ((uint32_t)0x00000001)
+#define  RCC_CR_HSIRDY                       ((uint32_t)0x00000002)
+
+#define  RCC_CR_HSITRIM                      ((uint32_t)0x000000F8)
+#define  RCC_CR_HSITRIM_0                    ((uint32_t)0x00000008) /*!<Bit 0 */
+#define  RCC_CR_HSITRIM_1                    ((uint32_t)0x00000010) /*!<Bit 1 */
+#define  RCC_CR_HSITRIM_2                    ((uint32_t)0x00000020) /*!<Bit 2 */
+#define  RCC_CR_HSITRIM_3                    ((uint32_t)0x00000040) /*!<Bit 3 */
+#define  RCC_CR_HSITRIM_4                    ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define  RCC_CR_HSICAL                       ((uint32_t)0x0000FF00)
+#define  RCC_CR_HSICAL_0                     ((uint32_t)0x00000100) /*!<Bit 0 */
+#define  RCC_CR_HSICAL_1                     ((uint32_t)0x00000200) /*!<Bit 1 */
+#define  RCC_CR_HSICAL_2                     ((uint32_t)0x00000400) /*!<Bit 2 */
+#define  RCC_CR_HSICAL_3                     ((uint32_t)0x00000800) /*!<Bit 3 */
+#define  RCC_CR_HSICAL_4                     ((uint32_t)0x00001000) /*!<Bit 4 */
+#define  RCC_CR_HSICAL_5                     ((uint32_t)0x00002000) /*!<Bit 5 */
+#define  RCC_CR_HSICAL_6                     ((uint32_t)0x00004000) /*!<Bit 6 */
+#define  RCC_CR_HSICAL_7                     ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define  RCC_CR_HSEON                        ((uint32_t)0x00010000)
+#define  RCC_CR_HSERDY                       ((uint32_t)0x00020000)
+#define  RCC_CR_HSEBYP                       ((uint32_t)0x00040000)
+#define  RCC_CR_CSSON                        ((uint32_t)0x00080000)
+#define  RCC_CR_PLLON                        ((uint32_t)0x01000000)
+#define  RCC_CR_PLLRDY                       ((uint32_t)0x02000000)
+#define  RCC_CR_PLLI2SON                     ((uint32_t)0x04000000)
+#define  RCC_CR_PLLI2SRDY                    ((uint32_t)0x08000000)
+#define  RCC_CR_PLLSAION                     ((uint32_t)0x10000000)
+#define  RCC_CR_PLLSAIRDY                    ((uint32_t)0x20000000)
+
+/********************  Bit definition for RCC_PLLCFGR register  ***************/
+#define  RCC_PLLCFGR_PLLM                    ((uint32_t)0x0000003F)
+#define  RCC_PLLCFGR_PLLM_0                  ((uint32_t)0x00000001)
+#define  RCC_PLLCFGR_PLLM_1                  ((uint32_t)0x00000002)
+#define  RCC_PLLCFGR_PLLM_2                  ((uint32_t)0x00000004)
+#define  RCC_PLLCFGR_PLLM_3                  ((uint32_t)0x00000008)
+#define  RCC_PLLCFGR_PLLM_4                  ((uint32_t)0x00000010)
+#define  RCC_PLLCFGR_PLLM_5                  ((uint32_t)0x00000020)
+
+#define  RCC_PLLCFGR_PLLN                     ((uint32_t)0x00007FC0)
+#define  RCC_PLLCFGR_PLLN_0                   ((uint32_t)0x00000040)
+#define  RCC_PLLCFGR_PLLN_1                   ((uint32_t)0x00000080)
+#define  RCC_PLLCFGR_PLLN_2                   ((uint32_t)0x00000100)
+#define  RCC_PLLCFGR_PLLN_3                   ((uint32_t)0x00000200)
+#define  RCC_PLLCFGR_PLLN_4                   ((uint32_t)0x00000400)
+#define  RCC_PLLCFGR_PLLN_5                   ((uint32_t)0x00000800)
+#define  RCC_PLLCFGR_PLLN_6                   ((uint32_t)0x00001000)
+#define  RCC_PLLCFGR_PLLN_7                   ((uint32_t)0x00002000)
+#define  RCC_PLLCFGR_PLLN_8                   ((uint32_t)0x00004000)
+
+#define  RCC_PLLCFGR_PLLP                    ((uint32_t)0x00030000)
+#define  RCC_PLLCFGR_PLLP_0                  ((uint32_t)0x00010000)
+#define  RCC_PLLCFGR_PLLP_1                  ((uint32_t)0x00020000)
+
+#define  RCC_PLLCFGR_PLLSRC                  ((uint32_t)0x00400000)
+#define  RCC_PLLCFGR_PLLSRC_HSE              ((uint32_t)0x00400000)
+#define  RCC_PLLCFGR_PLLSRC_HSI              ((uint32_t)0x00000000)
+
+#define  RCC_PLLCFGR_PLLQ                    ((uint32_t)0x0F000000)
+#define  RCC_PLLCFGR_PLLQ_0                  ((uint32_t)0x01000000)
+#define  RCC_PLLCFGR_PLLQ_1                  ((uint32_t)0x02000000)
+#define  RCC_PLLCFGR_PLLQ_2                  ((uint32_t)0x04000000)
+#define  RCC_PLLCFGR_PLLQ_3                  ((uint32_t)0x08000000)
+
+
+/********************  Bit definition for RCC_CFGR register  ******************/
+/*!< SW configuration */
+#define  RCC_CFGR_SW                         ((uint32_t)0x00000003)        /*!< SW[1:0] bits (System clock Switch) */
+#define  RCC_CFGR_SW_0                       ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  RCC_CFGR_SW_1                       ((uint32_t)0x00000002)        /*!< Bit 1 */
+
+#define  RCC_CFGR_SW_HSI                     ((uint32_t)0x00000000)        /*!< HSI selected as system clock */
+#define  RCC_CFGR_SW_HSE                     ((uint32_t)0x00000001)        /*!< HSE selected as system clock */
+#define  RCC_CFGR_SW_PLL                     ((uint32_t)0x00000002)        /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define  RCC_CFGR_SWS                        ((uint32_t)0x0000000C)        /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define  RCC_CFGR_SWS_0                      ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  RCC_CFGR_SWS_1                      ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  RCC_CFGR_SWS_HSI                    ((uint32_t)0x00000000)        /*!< HSI oscillator used as system clock */
+#define  RCC_CFGR_SWS_HSE                    ((uint32_t)0x00000004)        /*!< HSE oscillator used as system clock */
+#define  RCC_CFGR_SWS_PLL                    ((uint32_t)0x00000008)        /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define  RCC_CFGR_HPRE                       ((uint32_t)0x000000F0)        /*!< HPRE[3:0] bits (AHB prescaler) */
+#define  RCC_CFGR_HPRE_0                     ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  RCC_CFGR_HPRE_1                     ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  RCC_CFGR_HPRE_2                     ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  RCC_CFGR_HPRE_3                     ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  RCC_CFGR_HPRE_DIV1                  ((uint32_t)0x00000000)        /*!< SYSCLK not divided */
+#define  RCC_CFGR_HPRE_DIV2                  ((uint32_t)0x00000080)        /*!< SYSCLK divided by 2 */
+#define  RCC_CFGR_HPRE_DIV4                  ((uint32_t)0x00000090)        /*!< SYSCLK divided by 4 */
+#define  RCC_CFGR_HPRE_DIV8                  ((uint32_t)0x000000A0)        /*!< SYSCLK divided by 8 */
+#define  RCC_CFGR_HPRE_DIV16                 ((uint32_t)0x000000B0)        /*!< SYSCLK divided by 16 */
+#define  RCC_CFGR_HPRE_DIV64                 ((uint32_t)0x000000C0)        /*!< SYSCLK divided by 64 */
+#define  RCC_CFGR_HPRE_DIV128                ((uint32_t)0x000000D0)        /*!< SYSCLK divided by 128 */
+#define  RCC_CFGR_HPRE_DIV256                ((uint32_t)0x000000E0)        /*!< SYSCLK divided by 256 */
+#define  RCC_CFGR_HPRE_DIV512                ((uint32_t)0x000000F0)        /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define  RCC_CFGR_PPRE1                      ((uint32_t)0x00001C00)        /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define  RCC_CFGR_PPRE1_0                    ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  RCC_CFGR_PPRE1_1                    ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  RCC_CFGR_PPRE1_2                    ((uint32_t)0x00001000)        /*!< Bit 2 */
+
+#define  RCC_CFGR_PPRE1_DIV1                 ((uint32_t)0x00000000)        /*!< HCLK not divided */
+#define  RCC_CFGR_PPRE1_DIV2                 ((uint32_t)0x00001000)        /*!< HCLK divided by 2 */
+#define  RCC_CFGR_PPRE1_DIV4                 ((uint32_t)0x00001400)        /*!< HCLK divided by 4 */
+#define  RCC_CFGR_PPRE1_DIV8                 ((uint32_t)0x00001800)        /*!< HCLK divided by 8 */
+#define  RCC_CFGR_PPRE1_DIV16                ((uint32_t)0x00001C00)        /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define  RCC_CFGR_PPRE2                      ((uint32_t)0x0000E000)        /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define  RCC_CFGR_PPRE2_0                    ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define  RCC_CFGR_PPRE2_1                    ((uint32_t)0x00004000)        /*!< Bit 1 */
+#define  RCC_CFGR_PPRE2_2                    ((uint32_t)0x00008000)        /*!< Bit 2 */
+
+#define  RCC_CFGR_PPRE2_DIV1                 ((uint32_t)0x00000000)        /*!< HCLK not divided */
+#define  RCC_CFGR_PPRE2_DIV2                 ((uint32_t)0x00008000)        /*!< HCLK divided by 2 */
+#define  RCC_CFGR_PPRE2_DIV4                 ((uint32_t)0x0000A000)        /*!< HCLK divided by 4 */
+#define  RCC_CFGR_PPRE2_DIV8                 ((uint32_t)0x0000C000)        /*!< HCLK divided by 8 */
+#define  RCC_CFGR_PPRE2_DIV16                ((uint32_t)0x0000E000)        /*!< HCLK divided by 16 */
+
+/*!< RTCPRE configuration */
+#define  RCC_CFGR_RTCPRE                     ((uint32_t)0x001F0000)
+#define  RCC_CFGR_RTCPRE_0                   ((uint32_t)0x00010000)
+#define  RCC_CFGR_RTCPRE_1                   ((uint32_t)0x00020000)
+#define  RCC_CFGR_RTCPRE_2                   ((uint32_t)0x00040000)
+#define  RCC_CFGR_RTCPRE_3                   ((uint32_t)0x00080000)
+#define  RCC_CFGR_RTCPRE_4                   ((uint32_t)0x00100000)
+
+/*!< MCO1 configuration */
+#define  RCC_CFGR_MCO1                       ((uint32_t)0x00600000)
+#define  RCC_CFGR_MCO1_0                     ((uint32_t)0x00200000)
+#define  RCC_CFGR_MCO1_1                     ((uint32_t)0x00400000)
+
+#define  RCC_CFGR_I2SSRC                     ((uint32_t)0x00800000)
+
+#define  RCC_CFGR_MCO1PRE                    ((uint32_t)0x07000000)
+#define  RCC_CFGR_MCO1PRE_0                  ((uint32_t)0x01000000)
+#define  RCC_CFGR_MCO1PRE_1                  ((uint32_t)0x02000000)
+#define  RCC_CFGR_MCO1PRE_2                  ((uint32_t)0x04000000)
+
+#define  RCC_CFGR_MCO2PRE                    ((uint32_t)0x38000000)
+#define  RCC_CFGR_MCO2PRE_0                  ((uint32_t)0x08000000)
+#define  RCC_CFGR_MCO2PRE_1                  ((uint32_t)0x10000000)
+#define  RCC_CFGR_MCO2PRE_2                  ((uint32_t)0x20000000)
+
+#define  RCC_CFGR_MCO2                       ((uint32_t)0xC0000000)
+#define  RCC_CFGR_MCO2_0                     ((uint32_t)0x40000000)
+#define  RCC_CFGR_MCO2_1                     ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_CIR register  *******************/
+#define  RCC_CIR_LSIRDYF                     ((uint32_t)0x00000001)
+#define  RCC_CIR_LSERDYF                     ((uint32_t)0x00000002)
+#define  RCC_CIR_HSIRDYF                     ((uint32_t)0x00000004)
+#define  RCC_CIR_HSERDYF                     ((uint32_t)0x00000008)
+#define  RCC_CIR_PLLRDYF                     ((uint32_t)0x00000010)
+#define  RCC_CIR_PLLI2SRDYF                  ((uint32_t)0x00000020)
+#define  RCC_CIR_PLLSAIRDYF                  ((uint32_t)0x00000040)
+#define  RCC_CIR_CSSF                        ((uint32_t)0x00000080)
+#define  RCC_CIR_LSIRDYIE                    ((uint32_t)0x00000100)
+#define  RCC_CIR_LSERDYIE                    ((uint32_t)0x00000200)
+#define  RCC_CIR_HSIRDYIE                    ((uint32_t)0x00000400)
+#define  RCC_CIR_HSERDYIE                    ((uint32_t)0x00000800)
+#define  RCC_CIR_PLLRDYIE                    ((uint32_t)0x00001000)
+#define  RCC_CIR_PLLI2SRDYIE                 ((uint32_t)0x00002000)
+#define  RCC_CIR_PLLSAIRDYIE                 ((uint32_t)0x00004000)
+#define  RCC_CIR_LSIRDYC                     ((uint32_t)0x00010000)
+#define  RCC_CIR_LSERDYC                     ((uint32_t)0x00020000)
+#define  RCC_CIR_HSIRDYC                     ((uint32_t)0x00040000)
+#define  RCC_CIR_HSERDYC                     ((uint32_t)0x00080000)
+#define  RCC_CIR_PLLRDYC                     ((uint32_t)0x00100000)
+#define  RCC_CIR_PLLI2SRDYC                  ((uint32_t)0x00200000)
+#define  RCC_CIR_PLLSAIRDYC                  ((uint32_t)0x00400000)
+#define  RCC_CIR_CSSC                        ((uint32_t)0x00800000)
+
+/********************  Bit definition for RCC_AHB1RSTR register  **************/
+#define  RCC_AHB1RSTR_GPIOARST               ((uint32_t)0x00000001)
+#define  RCC_AHB1RSTR_GPIOBRST               ((uint32_t)0x00000002)
+#define  RCC_AHB1RSTR_GPIOCRST               ((uint32_t)0x00000004)
+#define  RCC_AHB1RSTR_GPIODRST               ((uint32_t)0x00000008)
+#define  RCC_AHB1RSTR_GPIOERST               ((uint32_t)0x00000010)
+#define  RCC_AHB1RSTR_GPIOFRST               ((uint32_t)0x00000020)
+#define  RCC_AHB1RSTR_GPIOGRST               ((uint32_t)0x00000040)
+#define  RCC_AHB1RSTR_GPIOHRST               ((uint32_t)0x00000080)
+#define  RCC_AHB1RSTR_GPIOIRST               ((uint32_t)0x00000100)
+#define  RCC_AHB1RSTR_GPIOJRST               ((uint32_t)0x00000200)
+#define  RCC_AHB1RSTR_GPIOKRST               ((uint32_t)0x00000400)
+#define  RCC_AHB1RSTR_CRCRST                 ((uint32_t)0x00001000)
+#define  RCC_AHB1RSTR_DMA1RST                ((uint32_t)0x00200000)
+#define  RCC_AHB1RSTR_DMA2RST                ((uint32_t)0x00400000)
+#define  RCC_AHB1RSTR_DMA2DRST               ((uint32_t)0x00800000)
+#define  RCC_AHB1RSTR_ETHMACRST              ((uint32_t)0x02000000)
+#define  RCC_AHB1RSTR_OTGHRST                ((uint32_t)0x20000000)
+
+/********************  Bit definition for RCC_AHB2RSTR register  **************/
+#define  RCC_AHB2RSTR_DCMIRST                ((uint32_t)0x00000001)
+#define  RCC_AHB2RSTR_RNGRST                 ((uint32_t)0x00000040)
+#define  RCC_AHB2RSTR_OTGFSRST               ((uint32_t)0x00000080)
+
+/********************  Bit definition for RCC_AHB3RSTR register  **************/
+
+#define  RCC_AHB3RSTR_FMCRST                ((uint32_t)0x00000001)
+#define  RCC_AHB3RSTR_QSPIRST               ((uint32_t)0x00000002)
+
+/********************  Bit definition for RCC_APB1RSTR register  **************/
+#define  RCC_APB1RSTR_TIM2RST                ((uint32_t)0x00000001)
+#define  RCC_APB1RSTR_TIM3RST                ((uint32_t)0x00000002)
+#define  RCC_APB1RSTR_TIM4RST                ((uint32_t)0x00000004)
+#define  RCC_APB1RSTR_TIM5RST                ((uint32_t)0x00000008)
+#define  RCC_APB1RSTR_TIM6RST                ((uint32_t)0x00000010)
+#define  RCC_APB1RSTR_TIM7RST                ((uint32_t)0x00000020)
+#define  RCC_APB1RSTR_TIM12RST               ((uint32_t)0x00000040)
+#define  RCC_APB1RSTR_TIM13RST               ((uint32_t)0x00000080)
+#define  RCC_APB1RSTR_TIM14RST               ((uint32_t)0x00000100)
+#define  RCC_APB1RSTR_LPTIM1RST              ((uint32_t)0x00000200)
+#define  RCC_APB1RSTR_WWDGRST                ((uint32_t)0x00000800)
+#define  RCC_APB1RSTR_SPI2RST                ((uint32_t)0x00004000)
+#define  RCC_APB1RSTR_SPI3RST                ((uint32_t)0x00008000)
+#define  RCC_APB1RSTR_SPDIFRXRST             ((uint32_t)0x00010000)
+#define  RCC_APB1RSTR_USART2RST              ((uint32_t)0x00020000)
+#define  RCC_APB1RSTR_USART3RST              ((uint32_t)0x00040000)
+#define  RCC_APB1RSTR_UART4RST               ((uint32_t)0x00080000)
+#define  RCC_APB1RSTR_UART5RST               ((uint32_t)0x00100000)
+#define  RCC_APB1RSTR_I2C1RST                ((uint32_t)0x00200000)
+#define  RCC_APB1RSTR_I2C2RST                ((uint32_t)0x00400000)
+#define  RCC_APB1RSTR_I2C3RST                ((uint32_t)0x00800000)
+#define  RCC_APB1RSTR_I2C4RST                ((uint32_t)0x01000000)
+#define  RCC_APB1RSTR_CAN1RST                ((uint32_t)0x02000000)
+#define  RCC_APB1RSTR_CAN2RST                ((uint32_t)0x04000000)
+#define  RCC_APB1RSTR_CECRST                 ((uint32_t)0x08000000)
+#define  RCC_APB1RSTR_PWRRST                 ((uint32_t)0x10000000)
+#define  RCC_APB1RSTR_DACRST                 ((uint32_t)0x20000000)
+#define  RCC_APB1RSTR_UART7RST               ((uint32_t)0x40000000)
+#define  RCC_APB1RSTR_UART8RST               ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_APB2RSTR register  **************/
+#define  RCC_APB2RSTR_TIM1RST                ((uint32_t)0x00000001)
+#define  RCC_APB2RSTR_TIM8RST                ((uint32_t)0x00000002)
+#define  RCC_APB2RSTR_USART1RST              ((uint32_t)0x00000010)
+#define  RCC_APB2RSTR_USART6RST              ((uint32_t)0x00000020)
+#define  RCC_APB2RSTR_ADCRST                 ((uint32_t)0x00000100)
+#define  RCC_APB2RSTR_SDMMC1RST              ((uint32_t)0x00000800)
+#define  RCC_APB2RSTR_SPI1RST                ((uint32_t)0x00001000)
+#define  RCC_APB2RSTR_SPI4RST                ((uint32_t)0x00002000)
+#define  RCC_APB2RSTR_SYSCFGRST              ((uint32_t)0x00004000)
+#define  RCC_APB2RSTR_TIM9RST                ((uint32_t)0x00010000)
+#define  RCC_APB2RSTR_TIM10RST               ((uint32_t)0x00020000)
+#define  RCC_APB2RSTR_TIM11RST               ((uint32_t)0x00040000)
+#define  RCC_APB2RSTR_SPI5RST                ((uint32_t)0x00100000)
+#define  RCC_APB2RSTR_SPI6RST                ((uint32_t)0x00200000)
+#define  RCC_APB2RSTR_SAI1RST                ((uint32_t)0x00400000)
+#define  RCC_APB2RSTR_SAI2RST                ((uint32_t)0x00800000)
+#define  RCC_APB2RSTR_LTDCRST                ((uint32_t)0x04000000)
+
+/********************  Bit definition for RCC_AHB1ENR register  ***************/
+#define  RCC_AHB1ENR_GPIOAEN                 ((uint32_t)0x00000001)
+#define  RCC_AHB1ENR_GPIOBEN                 ((uint32_t)0x00000002)
+#define  RCC_AHB1ENR_GPIOCEN                 ((uint32_t)0x00000004)
+#define  RCC_AHB1ENR_GPIODEN                 ((uint32_t)0x00000008)
+#define  RCC_AHB1ENR_GPIOEEN                 ((uint32_t)0x00000010)
+#define  RCC_AHB1ENR_GPIOFEN                 ((uint32_t)0x00000020)
+#define  RCC_AHB1ENR_GPIOGEN                 ((uint32_t)0x00000040)
+#define  RCC_AHB1ENR_GPIOHEN                 ((uint32_t)0x00000080)
+#define  RCC_AHB1ENR_GPIOIEN                 ((uint32_t)0x00000100)
+#define  RCC_AHB1ENR_GPIOJEN                 ((uint32_t)0x00000200)
+#define  RCC_AHB1ENR_GPIOKEN                 ((uint32_t)0x00000400)
+#define  RCC_AHB1ENR_CRCEN                   ((uint32_t)0x00001000)
+#define  RCC_AHB1ENR_BKPSRAMEN               ((uint32_t)0x00040000)
+#define  RCC_AHB1ENR_DTCMRAMEN               ((uint32_t)0x00100000)
+#define  RCC_AHB1ENR_DMA1EN                  ((uint32_t)0x00200000)
+#define  RCC_AHB1ENR_DMA2EN                  ((uint32_t)0x00400000)
+#define  RCC_AHB1ENR_DMA2DEN                 ((uint32_t)0x00800000)
+#define  RCC_AHB1ENR_ETHMACEN                ((uint32_t)0x02000000)
+#define  RCC_AHB1ENR_ETHMACTXEN              ((uint32_t)0x04000000)
+#define  RCC_AHB1ENR_ETHMACRXEN              ((uint32_t)0x08000000)
+#define  RCC_AHB1ENR_ETHMACPTPEN             ((uint32_t)0x10000000)
+#define  RCC_AHB1ENR_OTGHSEN                 ((uint32_t)0x20000000)
+#define  RCC_AHB1ENR_OTGHSULPIEN             ((uint32_t)0x40000000)
+
+/********************  Bit definition for RCC_AHB2ENR register  ***************/
+#define  RCC_AHB2ENR_DCMIEN                  ((uint32_t)0x00000001)
+#define  RCC_AHB2ENR_RNGEN                   ((uint32_t)0x00000040)
+#define  RCC_AHB2ENR_OTGFSEN                 ((uint32_t)0x00000080)
+
+/********************  Bit definition for RCC_AHB3ENR register  ***************/
+
+#define  RCC_AHB3ENR_FMCEN                  ((uint32_t)0x00000001)
+#define  RCC_AHB3ENR_QSPIEN                 ((uint32_t)0x00000002)
+
+/********************  Bit definition for RCC_APB1ENR register  ***************/
+#define  RCC_APB1ENR_TIM2EN                  ((uint32_t)0x00000001)
+#define  RCC_APB1ENR_TIM3EN                  ((uint32_t)0x00000002)
+#define  RCC_APB1ENR_TIM4EN                  ((uint32_t)0x00000004)
+#define  RCC_APB1ENR_TIM5EN                  ((uint32_t)0x00000008)
+#define  RCC_APB1ENR_TIM6EN                  ((uint32_t)0x00000010)
+#define  RCC_APB1ENR_TIM7EN                  ((uint32_t)0x00000020)
+#define  RCC_APB1ENR_TIM12EN                 ((uint32_t)0x00000040)
+#define  RCC_APB1ENR_TIM13EN                 ((uint32_t)0x00000080)
+#define  RCC_APB1ENR_TIM14EN                 ((uint32_t)0x00000100)
+#define  RCC_APB1ENR_LPTIM1EN                ((uint32_t)0x00000200)
+#define  RCC_APB1ENR_WWDGEN                  ((uint32_t)0x00000800)
+#define  RCC_APB1ENR_SPI2EN                  ((uint32_t)0x00004000)
+#define  RCC_APB1ENR_SPI3EN                  ((uint32_t)0x00008000)
+#define  RCC_APB1ENR_SPDIFRXEN               ((uint32_t)0x00010000)
+#define  RCC_APB1ENR_USART2EN                ((uint32_t)0x00020000)
+#define  RCC_APB1ENR_USART3EN                ((uint32_t)0x00040000)
+#define  RCC_APB1ENR_UART4EN                 ((uint32_t)0x00080000)
+#define  RCC_APB1ENR_UART5EN                 ((uint32_t)0x00100000)
+#define  RCC_APB1ENR_I2C1EN                  ((uint32_t)0x00200000)
+#define  RCC_APB1ENR_I2C2EN                  ((uint32_t)0x00400000)
+#define  RCC_APB1ENR_I2C3EN                  ((uint32_t)0x00800000)
+#define  RCC_APB1ENR_I2C4EN                  ((uint32_t)0x01000000)
+#define  RCC_APB1ENR_CAN1EN                  ((uint32_t)0x02000000)
+#define  RCC_APB1ENR_CAN2EN                  ((uint32_t)0x04000000)
+#define  RCC_APB1ENR_CECEN                   ((uint32_t)0x08000000)
+#define  RCC_APB1ENR_PWREN                   ((uint32_t)0x10000000)
+#define  RCC_APB1ENR_DACEN                   ((uint32_t)0x20000000)
+#define  RCC_APB1ENR_UART7EN                 ((uint32_t)0x40000000)
+#define  RCC_APB1ENR_UART8EN                 ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_APB2ENR register  ***************/
+#define  RCC_APB2ENR_TIM1EN                  ((uint32_t)0x00000001)
+#define  RCC_APB2ENR_TIM8EN                  ((uint32_t)0x00000002)
+#define  RCC_APB2ENR_USART1EN                ((uint32_t)0x00000010)
+#define  RCC_APB2ENR_USART6EN                ((uint32_t)0x00000020)
+#define  RCC_APB2ENR_ADC1EN                  ((uint32_t)0x00000100)
+#define  RCC_APB2ENR_ADC2EN                  ((uint32_t)0x00000200)
+#define  RCC_APB2ENR_ADC3EN                  ((uint32_t)0x00000400)
+#define  RCC_APB2ENR_SDMMC1EN                ((uint32_t)0x00000800)
+#define  RCC_APB2ENR_SPI1EN                  ((uint32_t)0x00001000)
+#define  RCC_APB2ENR_SPI4EN                  ((uint32_t)0x00002000)
+#define  RCC_APB2ENR_SYSCFGEN                ((uint32_t)0x00004000)
+#define  RCC_APB2ENR_TIM9EN                  ((uint32_t)0x00010000)
+#define  RCC_APB2ENR_TIM10EN                 ((uint32_t)0x00020000)
+#define  RCC_APB2ENR_TIM11EN                 ((uint32_t)0x00040000)
+#define  RCC_APB2ENR_SPI5EN                  ((uint32_t)0x00100000)
+#define  RCC_APB2ENR_SPI6EN                  ((uint32_t)0x00200000)
+#define  RCC_APB2ENR_SAI1EN                  ((uint32_t)0x00400000)
+#define  RCC_APB2ENR_SAI2EN                  ((uint32_t)0x00800000)
+#define  RCC_APB2ENR_LTDCEN                  ((uint32_t)0x04000000)
+
+/********************  Bit definition for RCC_AHB1LPENR register  *************/
+#define  RCC_AHB1LPENR_GPIOALPEN             ((uint32_t)0x00000001)
+#define  RCC_AHB1LPENR_GPIOBLPEN             ((uint32_t)0x00000002)
+#define  RCC_AHB1LPENR_GPIOCLPEN             ((uint32_t)0x00000004)
+#define  RCC_AHB1LPENR_GPIODLPEN             ((uint32_t)0x00000008)
+#define  RCC_AHB1LPENR_GPIOELPEN             ((uint32_t)0x00000010)
+#define  RCC_AHB1LPENR_GPIOFLPEN             ((uint32_t)0x00000020)
+#define  RCC_AHB1LPENR_GPIOGLPEN             ((uint32_t)0x00000040)
+#define  RCC_AHB1LPENR_GPIOHLPEN             ((uint32_t)0x00000080)
+#define  RCC_AHB1LPENR_GPIOILPEN             ((uint32_t)0x00000100)
+#define  RCC_AHB1LPENR_GPIOJLPEN             ((uint32_t)0x00000200)
+#define  RCC_AHB1LPENR_GPIOKLPEN             ((uint32_t)0x00000400)
+
+#define  RCC_AHB1LPENR_CRCLPEN               ((uint32_t)0x00001000)
+#define  RCC_AHB1LPENR_AXILPEN               ((uint32_t)0x00002000)
+#define  RCC_AHB1LPENR_FLITFLPEN             ((uint32_t)0x00008000)
+#define  RCC_AHB1LPENR_SRAM1LPEN             ((uint32_t)0x00010000)
+#define  RCC_AHB1LPENR_SRAM2LPEN             ((uint32_t)0x00020000)
+#define  RCC_AHB1LPENR_BKPSRAMLPEN           ((uint32_t)0x00040000)
+#define  RCC_AHB1LPENR_DTCMLPEN              ((uint32_t)0x00100000)
+#define  RCC_AHB1LPENR_DMA1LPEN              ((uint32_t)0x00200000)
+#define  RCC_AHB1LPENR_DMA2LPEN              ((uint32_t)0x00400000)
+#define  RCC_AHB1LPENR_DMA2DLPEN             ((uint32_t)0x00800000)
+#define  RCC_AHB1LPENR_ETHMACLPEN            ((uint32_t)0x02000000)
+#define  RCC_AHB1LPENR_ETHMACTXLPEN          ((uint32_t)0x04000000)
+#define  RCC_AHB1LPENR_ETHMACRXLPEN          ((uint32_t)0x08000000)
+#define  RCC_AHB1LPENR_ETHMACPTPLPEN         ((uint32_t)0x10000000)
+#define  RCC_AHB1LPENR_OTGHSLPEN             ((uint32_t)0x20000000)
+#define  RCC_AHB1LPENR_OTGHSULPILPEN         ((uint32_t)0x40000000)
+
+/********************  Bit definition for RCC_AHB2LPENR register  *************/
+#define  RCC_AHB2LPENR_DCMILPEN              ((uint32_t)0x00000001)
+#define  RCC_AHB2LPENR_RNGLPEN               ((uint32_t)0x00000040)
+#define  RCC_AHB2LPENR_OTGFSLPEN             ((uint32_t)0x00000080)
+
+/********************  Bit definition for RCC_AHB3LPENR register  *************/
+#define  RCC_AHB3LPENR_FMCLPEN              ((uint32_t)0x00000001)
+#define  RCC_AHB3LPENR_QSPILPEN             ((uint32_t)0x00000002)
+/********************  Bit definition for RCC_APB1LPENR register  *************/
+#define  RCC_APB1LPENR_TIM2LPEN              ((uint32_t)0x00000001)
+#define  RCC_APB1LPENR_TIM3LPEN              ((uint32_t)0x00000002)
+#define  RCC_APB1LPENR_TIM4LPEN              ((uint32_t)0x00000004)
+#define  RCC_APB1LPENR_TIM5LPEN              ((uint32_t)0x00000008)
+#define  RCC_APB1LPENR_TIM6LPEN              ((uint32_t)0x00000010)
+#define  RCC_APB1LPENR_TIM7LPEN              ((uint32_t)0x00000020)
+#define  RCC_APB1LPENR_TIM12LPEN             ((uint32_t)0x00000040)
+#define  RCC_APB1LPENR_TIM13LPEN             ((uint32_t)0x00000080)
+#define  RCC_APB1LPENR_TIM14LPEN             ((uint32_t)0x00000100)
+#define  RCC_APB1LPENR_LPTIM1LPEN            ((uint32_t)0x00000200)
+#define  RCC_APB1LPENR_WWDGLPEN              ((uint32_t)0x00000800)
+#define  RCC_APB1LPENR_SPI2LPEN              ((uint32_t)0x00004000)
+#define  RCC_APB1LPENR_SPI3LPEN              ((uint32_t)0x00008000)
+#define  RCC_APB1LPENR_SPDIFRXLPEN           ((uint32_t)0x00010000)
+#define  RCC_APB1LPENR_USART2LPEN            ((uint32_t)0x00020000)
+#define  RCC_APB1LPENR_USART3LPEN            ((uint32_t)0x00040000)
+#define  RCC_APB1LPENR_UART4LPEN             ((uint32_t)0x00080000)
+#define  RCC_APB1LPENR_UART5LPEN             ((uint32_t)0x00100000)
+#define  RCC_APB1LPENR_I2C1LPEN              ((uint32_t)0x00200000)
+#define  RCC_APB1LPENR_I2C2LPEN              ((uint32_t)0x00400000)
+#define  RCC_APB1LPENR_I2C3LPEN              ((uint32_t)0x00800000)
+#define  RCC_APB1LPENR_I2C4LPEN              ((uint32_t)0x01000000)
+#define  RCC_APB1LPENR_CAN1LPEN              ((uint32_t)0x02000000)
+#define  RCC_APB1LPENR_CAN2LPEN              ((uint32_t)0x04000000)
+#define  RCC_APB1LPENR_CECLPEN               ((uint32_t)0x08000000)
+#define  RCC_APB1LPENR_PWRLPEN               ((uint32_t)0x10000000)
+#define  RCC_APB1LPENR_DACLPEN               ((uint32_t)0x20000000)
+#define  RCC_APB1LPENR_UART7LPEN             ((uint32_t)0x40000000)
+#define  RCC_APB1LPENR_UART8LPEN             ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_APB2LPENR register  *************/
+#define  RCC_APB2LPENR_TIM1LPEN              ((uint32_t)0x00000001)
+#define  RCC_APB2LPENR_TIM8LPEN              ((uint32_t)0x00000002)
+#define  RCC_APB2LPENR_USART1LPEN            ((uint32_t)0x00000010)
+#define  RCC_APB2LPENR_USART6LPEN            ((uint32_t)0x00000020)
+#define  RCC_APB2LPENR_ADC1LPEN              ((uint32_t)0x00000100)
+#define  RCC_APB2LPENR_ADC2LPEN              ((uint32_t)0x00000200)
+#define  RCC_APB2LPENR_ADC3LPEN              ((uint32_t)0x00000400)
+#define  RCC_APB2LPENR_SDMMC1LPEN            ((uint32_t)0x00000800)
+#define  RCC_APB2LPENR_SPI1LPEN              ((uint32_t)0x00001000)
+#define  RCC_APB2LPENR_SPI4LPEN              ((uint32_t)0x00002000)
+#define  RCC_APB2LPENR_SYSCFGLPEN            ((uint32_t)0x00004000)
+#define  RCC_APB2LPENR_TIM9LPEN              ((uint32_t)0x00010000)
+#define  RCC_APB2LPENR_TIM10LPEN             ((uint32_t)0x00020000)
+#define  RCC_APB2LPENR_TIM11LPEN             ((uint32_t)0x00040000)
+#define  RCC_APB2LPENR_SPI5LPEN              ((uint32_t)0x00100000)
+#define  RCC_APB2LPENR_SPI6LPEN              ((uint32_t)0x00200000)
+#define  RCC_APB2LPENR_SAI1LPEN              ((uint32_t)0x00400000)
+#define  RCC_APB2LPENR_SAI2LPEN              ((uint32_t)0x00800000)
+#define  RCC_APB2LPENR_LTDCLPEN              ((uint32_t)0x04000000)
+
+/********************  Bit definition for RCC_BDCR register  ******************/
+#define  RCC_BDCR_LSEON                      ((uint32_t)0x00000001)
+#define  RCC_BDCR_LSERDY                     ((uint32_t)0x00000002)
+#define  RCC_BDCR_LSEBYP                     ((uint32_t)0x00000004)
+#define  RCC_BDCR_LSEDRV                     ((uint32_t)0x00000018)
+#define  RCC_BDCR_LSEDRV_0                   ((uint32_t)0x00000008)
+#define  RCC_BDCR_LSEDRV_1                   ((uint32_t)0x00000010)
+#define  RCC_BDCR_RTCSEL                     ((uint32_t)0x00000300)
+#define  RCC_BDCR_RTCSEL_0                   ((uint32_t)0x00000100)
+#define  RCC_BDCR_RTCSEL_1                   ((uint32_t)0x00000200)
+#define  RCC_BDCR_RTCEN                      ((uint32_t)0x00008000)
+#define  RCC_BDCR_BDRST                      ((uint32_t)0x00010000)
+
+/********************  Bit definition for RCC_CSR register  *******************/
+#define  RCC_CSR_LSION                       ((uint32_t)0x00000001)
+#define  RCC_CSR_LSIRDY                      ((uint32_t)0x00000002)
+#define  RCC_CSR_RMVF                        ((uint32_t)0x01000000)
+#define  RCC_CSR_BORRSTF                     ((uint32_t)0x02000000)
+#define  RCC_CSR_PINRSTF                     ((uint32_t)0x04000000)
+#define  RCC_CSR_PORRSTF                     ((uint32_t)0x08000000)
+#define  RCC_CSR_SFTRSTF                     ((uint32_t)0x10000000)
+#define  RCC_CSR_IWDGRSTF                    ((uint32_t)0x20000000)
+#define  RCC_CSR_WWDGRSTF                    ((uint32_t)0x40000000)
+#define  RCC_CSR_LPWRRSTF                    ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_SSCGR register  *****************/
+#define  RCC_SSCGR_MODPER                    ((uint32_t)0x00001FFF)
+#define  RCC_SSCGR_INCSTEP                   ((uint32_t)0x0FFFE000)
+#define  RCC_SSCGR_SPREADSEL                 ((uint32_t)0x40000000)
+#define  RCC_SSCGR_SSCGEN                    ((uint32_t)0x80000000)
+
+/********************  Bit definition for RCC_PLLI2SCFGR register  ************/
+#define  RCC_PLLI2SCFGR_PLLI2SN              ((uint32_t)0x00007FC0)
+#define  RCC_PLLI2SCFGR_PLLI2SN_0            ((uint32_t)0x00000040)
+#define  RCC_PLLI2SCFGR_PLLI2SN_1            ((uint32_t)0x00000080)
+#define  RCC_PLLI2SCFGR_PLLI2SN_2            ((uint32_t)0x00000100)
+#define  RCC_PLLI2SCFGR_PLLI2SN_3            ((uint32_t)0x00000200)
+#define  RCC_PLLI2SCFGR_PLLI2SN_4            ((uint32_t)0x00000400)
+#define  RCC_PLLI2SCFGR_PLLI2SN_5            ((uint32_t)0x00000800)
+#define  RCC_PLLI2SCFGR_PLLI2SN_6            ((uint32_t)0x00001000)
+#define  RCC_PLLI2SCFGR_PLLI2SN_7            ((uint32_t)0x00002000)
+#define  RCC_PLLI2SCFGR_PLLI2SN_8            ((uint32_t)0x00004000)
+
+#define  RCC_PLLI2SCFGR_PLLI2SP              ((uint32_t)0x00030000)
+#define  RCC_PLLI2SCFGR_PLLI2SP_0            ((uint32_t)0x00010000)
+#define  RCC_PLLI2SCFGR_PLLI2SP_1            ((uint32_t)0x00020000)
+
+#define  RCC_PLLI2SCFGR_PLLI2SQ              ((uint32_t)0x0F000000)
+#define  RCC_PLLI2SCFGR_PLLI2SQ_0            ((uint32_t)0x01000000)
+#define  RCC_PLLI2SCFGR_PLLI2SQ_1            ((uint32_t)0x02000000)
+#define  RCC_PLLI2SCFGR_PLLI2SQ_2            ((uint32_t)0x04000000)
+#define  RCC_PLLI2SCFGR_PLLI2SQ_3            ((uint32_t)0x08000000)
+
+#define  RCC_PLLI2SCFGR_PLLI2SR              ((uint32_t)0x70000000)
+#define  RCC_PLLI2SCFGR_PLLI2SR_0            ((uint32_t)0x10000000)
+#define  RCC_PLLI2SCFGR_PLLI2SR_1            ((uint32_t)0x20000000)
+#define  RCC_PLLI2SCFGR_PLLI2SR_2            ((uint32_t)0x40000000)
+
+/********************  Bit definition for RCC_PLLSAICFGR register  ************/
+#define  RCC_PLLSAICFGR_PLLSAIN              ((uint32_t)0x00007FC0)
+#define  RCC_PLLSAICFGR_PLLSAIN_0            ((uint32_t)0x00000040)
+#define  RCC_PLLSAICFGR_PLLSAIN_1            ((uint32_t)0x00000080)
+#define  RCC_PLLSAICFGR_PLLSAIN_2            ((uint32_t)0x00000100)
+#define  RCC_PLLSAICFGR_PLLSAIN_3            ((uint32_t)0x00000200)
+#define  RCC_PLLSAICFGR_PLLSAIN_4            ((uint32_t)0x00000400)
+#define  RCC_PLLSAICFGR_PLLSAIN_5            ((uint32_t)0x00000800)
+#define  RCC_PLLSAICFGR_PLLSAIN_6            ((uint32_t)0x00001000)
+#define  RCC_PLLSAICFGR_PLLSAIN_7            ((uint32_t)0x00002000)
+#define  RCC_PLLSAICFGR_PLLSAIN_8            ((uint32_t)0x00004000)
+
+#define  RCC_PLLSAICFGR_PLLSAIP              ((uint32_t)0x00030000)
+#define  RCC_PLLSAICFGR_PLLSAIP_0            ((uint32_t)0x00010000)
+#define  RCC_PLLSAICFGR_PLLSAIP_1            ((uint32_t)0x00020000)
+
+#define  RCC_PLLSAICFGR_PLLSAIQ              ((uint32_t)0x0F000000)
+#define  RCC_PLLSAICFGR_PLLSAIQ_0            ((uint32_t)0x01000000)
+#define  RCC_PLLSAICFGR_PLLSAIQ_1            ((uint32_t)0x02000000)
+#define  RCC_PLLSAICFGR_PLLSAIQ_2            ((uint32_t)0x04000000)
+#define  RCC_PLLSAICFGR_PLLSAIQ_3            ((uint32_t)0x08000000)
+
+#define  RCC_PLLSAICFGR_PLLSAIR              ((uint32_t)0x70000000)
+#define  RCC_PLLSAICFGR_PLLSAIR_0            ((uint32_t)0x10000000)
+#define  RCC_PLLSAICFGR_PLLSAIR_1            ((uint32_t)0x20000000)
+#define  RCC_PLLSAICFGR_PLLSAIR_2            ((uint32_t)0x40000000)
+
+/********************  Bit definition for RCC_DCKCFGR1 register  ***************/
+#define  RCC_DCKCFGR1_PLLI2SDIVQ              ((uint32_t)0x0000001F)
+#define  RCC_DCKCFGR1_PLLI2SDIVQ_0            ((uint32_t)0x00000001)
+#define  RCC_DCKCFGR1_PLLI2SDIVQ_1            ((uint32_t)0x00000002)
+#define  RCC_DCKCFGR1_PLLI2SDIVQ_2            ((uint32_t)0x00000004)
+#define  RCC_DCKCFGR1_PLLI2SDIVQ_3            ((uint32_t)0x00000008)
+#define  RCC_DCKCFGR1_PLLI2SDIVQ_4            ((uint32_t)0x00000010)
+
+#define  RCC_DCKCFGR1_PLLSAIDIVQ              ((uint32_t)0x00001F00)
+#define  RCC_DCKCFGR1_PLLSAIDIVQ_0            ((uint32_t)0x00000100)
+#define  RCC_DCKCFGR1_PLLSAIDIVQ_1            ((uint32_t)0x00000200)
+#define  RCC_DCKCFGR1_PLLSAIDIVQ_2            ((uint32_t)0x00000400)
+#define  RCC_DCKCFGR1_PLLSAIDIVQ_3            ((uint32_t)0x00000800)
+#define  RCC_DCKCFGR1_PLLSAIDIVQ_4            ((uint32_t)0x00001000)
+
+#define  RCC_DCKCFGR1_PLLSAIDIVR              ((uint32_t)0x00030000)
+#define  RCC_DCKCFGR1_PLLSAIDIVR_0            ((uint32_t)0x00010000)
+#define  RCC_DCKCFGR1_PLLSAIDIVR_1            ((uint32_t)0x00020000)
+
+#define  RCC_DCKCFGR1_SAI1SEL                 ((uint32_t)0x00300000)
+#define  RCC_DCKCFGR1_SAI1SEL_0               ((uint32_t)0x00100000)
+#define  RCC_DCKCFGR1_SAI1SEL_1               ((uint32_t)0x00200000)
+
+#define  RCC_DCKCFGR1_SAI2SEL                 ((uint32_t)0x00C00000)
+#define  RCC_DCKCFGR1_SAI2SEL_0               ((uint32_t)0x00400000)
+#define  RCC_DCKCFGR1_SAI2SEL_1               ((uint32_t)0x00800000)
+
+#define  RCC_DCKCFGR1_TIMPRE                  ((uint32_t)0x01000000)
+
+/********************  Bit definition for RCC_DCKCFGR2 register  ***************/
+#define  RCC_DCKCFGR2_USART1SEL              ((uint32_t)0x00000003)
+#define  RCC_DCKCFGR2_USART1SEL_0            ((uint32_t)0x00000001)
+#define  RCC_DCKCFGR2_USART1SEL_1            ((uint32_t)0x00000002)
+#define  RCC_DCKCFGR2_USART2SEL              ((uint32_t)0x0000000C)
+#define  RCC_DCKCFGR2_USART2SEL_0            ((uint32_t)0x00000004)
+#define  RCC_DCKCFGR2_USART2SEL_1            ((uint32_t)0x00000008)
+#define  RCC_DCKCFGR2_USART3SEL              ((uint32_t)0x00000030)
+#define  RCC_DCKCFGR2_USART3SEL_0            ((uint32_t)0x00000010)
+#define  RCC_DCKCFGR2_USART3SEL_1            ((uint32_t)0x00000020)
+#define  RCC_DCKCFGR2_UART4SEL               ((uint32_t)0x000000C0)
+#define  RCC_DCKCFGR2_UART4SEL_0             ((uint32_t)0x00000040)
+#define  RCC_DCKCFGR2_UART4SEL_1             ((uint32_t)0x00000080)
+#define  RCC_DCKCFGR2_UART5SEL               ((uint32_t)0x00000300)
+#define  RCC_DCKCFGR2_UART5SEL_0             ((uint32_t)0x00000100)
+#define  RCC_DCKCFGR2_UART5SEL_1             ((uint32_t)0x00000200)
+#define  RCC_DCKCFGR2_USART6SEL              ((uint32_t)0x00000C00)
+#define  RCC_DCKCFGR2_USART6SEL_0            ((uint32_t)0x00000400)
+#define  RCC_DCKCFGR2_USART6SEL_1            ((uint32_t)0x00000800)
+#define  RCC_DCKCFGR2_UART7SEL               ((uint32_t)0x00003000)
+#define  RCC_DCKCFGR2_UART7SEL_0             ((uint32_t)0x00001000)
+#define  RCC_DCKCFGR2_UART7SEL_1             ((uint32_t)0x00002000)
+#define  RCC_DCKCFGR2_UART8SEL               ((uint32_t)0x0000C000)
+#define  RCC_DCKCFGR2_UART8SEL_0             ((uint32_t)0x00004000)
+#define  RCC_DCKCFGR2_UART8SEL_1             ((uint32_t)0x00008000)
+#define  RCC_DCKCFGR2_I2C1SEL                ((uint32_t)0x00030000)
+#define  RCC_DCKCFGR2_I2C1SEL_0              ((uint32_t)0x00010000)
+#define  RCC_DCKCFGR2_I2C1SEL_1              ((uint32_t)0x00020000)
+#define  RCC_DCKCFGR2_I2C2SEL                ((uint32_t)0x000C0000)
+#define  RCC_DCKCFGR2_I2C2SEL_0              ((uint32_t)0x00040000)
+#define  RCC_DCKCFGR2_I2C2SEL_1              ((uint32_t)0x00080000)
+#define  RCC_DCKCFGR2_I2C3SEL                ((uint32_t)0x00300000)
+#define  RCC_DCKCFGR2_I2C3SEL_0              ((uint32_t)0x00100000)
+#define  RCC_DCKCFGR2_I2C3SEL_1              ((uint32_t)0x00200000)
+#define  RCC_DCKCFGR2_I2C4SEL                ((uint32_t)0x00C00000)
+#define  RCC_DCKCFGR2_I2C4SEL_0              ((uint32_t)0x00400000)
+#define  RCC_DCKCFGR2_I2C4SEL_1              ((uint32_t)0x00800000)
+#define  RCC_DCKCFGR2_LPTIM1SEL              ((uint32_t)0x03000000)
+#define  RCC_DCKCFGR2_LPTIM1SEL_0            ((uint32_t)0x01000000)
+#define  RCC_DCKCFGR2_LPTIM1SEL_1            ((uint32_t)0x02000000)
+#define  RCC_DCKCFGR2_CECSEL                 ((uint32_t)0x04000000)
+#define  RCC_DCKCFGR2_CK48MSEL               ((uint32_t)0x08000000)
+#define  RCC_DCKCFGR2_SDMMC1SEL              ((uint32_t)0x10000000)
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    RNG                                     */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bits definition for RNG_CR register  *******************/
+#define RNG_CR_RNGEN                         ((uint32_t)0x00000004)
+#define RNG_CR_IE                            ((uint32_t)0x00000008)
+
+/********************  Bits definition for RNG_SR register  *******************/
+#define RNG_SR_DRDY                          ((uint32_t)0x00000001)
+#define RNG_SR_CECS                          ((uint32_t)0x00000002)
+#define RNG_SR_SECS                          ((uint32_t)0x00000004)
+#define RNG_SR_CEIS                          ((uint32_t)0x00000020)
+#define RNG_SR_SEIS                          ((uint32_t)0x00000040)
+
+/******************************************************************************/
+/*                                                                            */
+/*                           Real-Time Clock (RTC)                            */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bits definition for RTC_TR register  *******************/
+#define RTC_TR_PM                            ((uint32_t)0x00400000)
+#define RTC_TR_HT                            ((uint32_t)0x00300000)
+#define RTC_TR_HT_0                          ((uint32_t)0x00100000)
+#define RTC_TR_HT_1                          ((uint32_t)0x00200000)
+#define RTC_TR_HU                            ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0                          ((uint32_t)0x00010000)
+#define RTC_TR_HU_1                          ((uint32_t)0x00020000)
+#define RTC_TR_HU_2                          ((uint32_t)0x00040000)
+#define RTC_TR_HU_3                          ((uint32_t)0x00080000)
+#define RTC_TR_MNT                           ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0                         ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1                         ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2                         ((uint32_t)0x00004000)
+#define RTC_TR_MNU                           ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0                         ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1                         ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2                         ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3                         ((uint32_t)0x00000800)
+#define RTC_TR_ST                            ((uint32_t)0x00000070)
+#define RTC_TR_ST_0                          ((uint32_t)0x00000010)
+#define RTC_TR_ST_1                          ((uint32_t)0x00000020)
+#define RTC_TR_ST_2                          ((uint32_t)0x00000040)
+#define RTC_TR_SU                            ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0                          ((uint32_t)0x00000001)
+#define RTC_TR_SU_1                          ((uint32_t)0x00000002)
+#define RTC_TR_SU_2                          ((uint32_t)0x00000004)
+#define RTC_TR_SU_3                          ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_DR register  *******************/
+#define RTC_DR_YT                            ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0                          ((uint32_t)0x00100000)
+#define RTC_DR_YT_1                          ((uint32_t)0x00200000)
+#define RTC_DR_YT_2                          ((uint32_t)0x00400000)
+#define RTC_DR_YT_3                          ((uint32_t)0x00800000)
+#define RTC_DR_YU                            ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0                          ((uint32_t)0x00010000)
+#define RTC_DR_YU_1                          ((uint32_t)0x00020000)
+#define RTC_DR_YU_2                          ((uint32_t)0x00040000)
+#define RTC_DR_YU_3                          ((uint32_t)0x00080000)
+#define RTC_DR_WDU                           ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0                         ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1                         ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2                         ((uint32_t)0x00008000)
+#define RTC_DR_MT                            ((uint32_t)0x00001000)
+#define RTC_DR_MU                            ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0                          ((uint32_t)0x00000100)
+#define RTC_DR_MU_1                          ((uint32_t)0x00000200)
+#define RTC_DR_MU_2                          ((uint32_t)0x00000400)
+#define RTC_DR_MU_3                          ((uint32_t)0x00000800)
+#define RTC_DR_DT                            ((uint32_t)0x00000030)
+#define RTC_DR_DT_0                          ((uint32_t)0x00000010)
+#define RTC_DR_DT_1                          ((uint32_t)0x00000020)
+#define RTC_DR_DU                            ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0                          ((uint32_t)0x00000001)
+#define RTC_DR_DU_1                          ((uint32_t)0x00000002)
+#define RTC_DR_DU_2                          ((uint32_t)0x00000004)
+#define RTC_DR_DU_3                          ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_CR register  *******************/
+#define RTC_CR_ITSE                          ((uint32_t)0x01000000) 
+#define RTC_CR_COE                           ((uint32_t)0x00800000)
+#define RTC_CR_OSEL                          ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0                        ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1                        ((uint32_t)0x00400000)
+#define RTC_CR_POL                           ((uint32_t)0x00100000)
+#define RTC_CR_COSEL                         ((uint32_t)0x00080000)
+#define RTC_CR_BCK                           ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H                         ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H                         ((uint32_t)0x00010000)
+#define RTC_CR_TSIE                          ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE                         ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE                        ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE                        ((uint32_t)0x00001000)
+#define RTC_CR_TSE                           ((uint32_t)0x00000800)
+#define RTC_CR_WUTE                          ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE                         ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE                         ((uint32_t)0x00000100)
+#define RTC_CR_FMT                           ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD                       ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON                       ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE                        ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL                       ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0                     ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1                     ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2                     ((uint32_t)0x00000004)
+
+/********************  Bits definition for RTC_ISR register  ******************/
+#define RTC_ISR_ITSF                         ((uint32_t)0x00020000)
+#define RTC_ISR_RECALPF                      ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP3F                       ((uint32_t)0x00008000)
+#define RTC_ISR_TAMP2F                       ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F                       ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF                        ((uint32_t)0x00001000)
+#define RTC_ISR_TSF                          ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF                         ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF                        ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF                        ((uint32_t)0x00000100)
+#define RTC_ISR_INIT                         ((uint32_t)0x00000080)
+#define RTC_ISR_INITF                        ((uint32_t)0x00000040)
+#define RTC_ISR_RSF                          ((uint32_t)0x00000020)
+#define RTC_ISR_INITS                        ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF                         ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF                        ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF                       ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF                       ((uint32_t)0x00000001)
+
+/********************  Bits definition for RTC_PRER register  *****************/
+#define RTC_PRER_PREDIV_A                    ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S                    ((uint32_t)0x00007FFF)
+
+/********************  Bits definition for RTC_WUTR register  *****************/
+#define RTC_WUTR_WUT                         ((uint32_t)0x0000FFFF)
+
+/********************  Bits definition for RTC_ALRMAR register  ***************/
+#define RTC_ALRMAR_MSK4                      ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL                     ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT                        ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0                      ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1                      ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU                        ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0                      ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1                      ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2                      ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3                      ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3                      ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM                        ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT                        ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0                      ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1                      ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU                        ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0                      ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1                      ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2                      ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3                      ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2                      ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT                       ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0                     ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1                     ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2                     ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU                       ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0                     ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1                     ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2                     ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3                     ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1                      ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST                        ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0                      ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1                      ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2                      ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU                        ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0                      ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1                      ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2                      ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3                      ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_ALRMBR register  ***************/
+#define RTC_ALRMBR_MSK4                      ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL                     ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT                        ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0                      ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1                      ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU                        ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0                      ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1                      ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2                      ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3                      ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3                      ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM                        ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT                        ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0                      ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1                      ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU                        ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0                      ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1                      ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2                      ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3                      ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2                      ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT                       ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0                     ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1                     ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2                     ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU                       ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0                     ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1                     ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2                     ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3                     ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1                      ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST                        ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0                      ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1                      ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2                      ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU                        ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0                      ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1                      ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2                      ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3                      ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_WPR register  ******************/
+#define RTC_WPR_KEY                          ((uint32_t)0x000000FF)
+
+/********************  Bits definition for RTC_SSR register  ******************/
+#define RTC_SSR_SS                           ((uint32_t)0x0000FFFF)
+
+/********************  Bits definition for RTC_SHIFTR register  ***************/
+#define RTC_SHIFTR_SUBFS                     ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S                     ((uint32_t)0x80000000)
+
+/********************  Bits definition for RTC_TSTR register  *****************/
+#define RTC_TSTR_PM                          ((uint32_t)0x00400000)
+#define RTC_TSTR_HT                          ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0                        ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1                        ((uint32_t)0x00200000)
+#define RTC_TSTR_HU                          ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0                        ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1                        ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2                        ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3                        ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT                         ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0                       ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1                       ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2                       ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU                         ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0                       ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1                       ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2                       ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3                       ((uint32_t)0x00000800)
+#define RTC_TSTR_ST                          ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0                        ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1                        ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2                        ((uint32_t)0x00000040)
+#define RTC_TSTR_SU                          ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0                        ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1                        ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2                        ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3                        ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_TSDR register  *****************/
+#define RTC_TSDR_WDU                         ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0                       ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1                       ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2                       ((uint32_t)0x00008000)
+#define RTC_TSDR_MT                          ((uint32_t)0x00001000)
+#define RTC_TSDR_MU                          ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0                        ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1                        ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2                        ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3                        ((uint32_t)0x00000800)
+#define RTC_TSDR_DT                          ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0                        ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1                        ((uint32_t)0x00000020)
+#define RTC_TSDR_DU                          ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0                        ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1                        ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2                        ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3                        ((uint32_t)0x00000008)
+
+/********************  Bits definition for RTC_TSSSR register  ****************/
+#define RTC_TSSSR_SS                         ((uint32_t)0x0000FFFF)
+
+/********************  Bits definition for RTC_CAL register  *****************/
+#define RTC_CALR_CALP                        ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8                       ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16                      ((uint32_t)0x00002000)
+#define RTC_CALR_CALM                        ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0                      ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1                      ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2                      ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3                      ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4                      ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5                      ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6                      ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7                      ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8                      ((uint32_t)0x00000100)
+
+/********************  Bits definition for RTC_TAMPCR register  ****************/
+#define RTC_TAMPCR_TAMP3MF                    ((uint32_t)0x01000000)
+#define RTC_TAMPCR_TAMP3NOERASE               ((uint32_t)0x00800000)
+#define RTC_TAMPCR_TAMP3IE                    ((uint32_t)0x00400000)
+#define RTC_TAMPCR_TAMP2MF                    ((uint32_t)0x00200000)
+#define RTC_TAMPCR_TAMP2NOERASE               ((uint32_t)0x00100000)
+#define RTC_TAMPCR_TAMP2IE                    ((uint32_t)0x00080000)
+#define RTC_TAMPCR_TAMP1MF                    ((uint32_t)0x00040000)
+#define RTC_TAMPCR_TAMP1NOERASE               ((uint32_t)0x00020000)
+#define RTC_TAMPCR_TAMP1IE                    ((uint32_t)0x00010000)
+#define RTC_TAMPCR_TAMPPUDIS                  ((uint32_t)0x00008000)
+#define RTC_TAMPCR_TAMPPRCH                   ((uint32_t)0x00006000)
+#define RTC_TAMPCR_TAMPPRCH_0                 ((uint32_t)0x00002000)
+#define RTC_TAMPCR_TAMPPRCH_1                 ((uint32_t)0x00004000)
+#define RTC_TAMPCR_TAMPFLT                    ((uint32_t)0x00001800)
+#define RTC_TAMPCR_TAMPFLT_0                  ((uint32_t)0x00000800)
+#define RTC_TAMPCR_TAMPFLT_1                  ((uint32_t)0x00001000)
+#define RTC_TAMPCR_TAMPFREQ                   ((uint32_t)0x00000700)
+#define RTC_TAMPCR_TAMPFREQ_0                 ((uint32_t)0x00000100)
+#define RTC_TAMPCR_TAMPFREQ_1                 ((uint32_t)0x00000200)
+#define RTC_TAMPCR_TAMPFREQ_2                 ((uint32_t)0x00000400)
+#define RTC_TAMPCR_TAMPTS                     ((uint32_t)0x00000080)
+#define RTC_TAMPCR_TAMP3_TRG                  ((uint32_t)0x00000040)
+#define RTC_TAMPCR_TAMP3E                     ((uint32_t)0x00000020)
+#define RTC_TAMPCR_TAMP2_TRG                   ((uint32_t)0x00000010)
+#define RTC_TAMPCR_TAMP2E                     ((uint32_t)0x00000008)
+#define RTC_TAMPCR_TAMPIE                     ((uint32_t)0x00000004)
+#define RTC_TAMPCR_TAMP1_TRG                   ((uint32_t)0x00000002)
+#define RTC_TAMPCR_TAMP1E                     ((uint32_t)0x00000001)
+
+/********************  Bits definition for RTC_ALRMASSR register  *************/
+#define RTC_ALRMASSR_MASKSS                  ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0                ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1                ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2                ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3                ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS                      ((uint32_t)0x00007FFF)
+
+/********************  Bits definition for RTC_ALRMBSSR register  *************/
+#define RTC_ALRMBSSR_MASKSS                  ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0                ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1                ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2                ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3                ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS                      ((uint32_t)0x00007FFF)
+
+/********************  Bits definition for RTC_OR register  ****************/
+#define RTC_OR_TSINSEL                      ((uint32_t)0x00000006)
+#define RTC_OR_TSINSEL_0                    ((uint32_t)0x00000002)
+#define RTC_OR_TSINSEL_1                    ((uint32_t)0x00000004)
+#define RTC_OR_ALARMTYPE                    ((uint32_t)0x00000008)
+
+
+/********************  Bits definition for RTC_BKP0R register  ****************/
+#define RTC_BKP0R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP1R register  ****************/
+#define RTC_BKP1R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP2R register  ****************/
+#define RTC_BKP2R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP3R register  ****************/
+#define RTC_BKP3R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP4R register  ****************/
+#define RTC_BKP4R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP5R register  ****************/
+#define RTC_BKP5R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP6R register  ****************/
+#define RTC_BKP6R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP7R register  ****************/
+#define RTC_BKP7R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP8R register  ****************/
+#define RTC_BKP8R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP9R register  ****************/
+#define RTC_BKP9R                            ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP10R register  ***************/
+#define RTC_BKP10R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP11R register  ***************/
+#define RTC_BKP11R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP12R register  ***************/
+#define RTC_BKP12R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP13R register  ***************/
+#define RTC_BKP13R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP14R register  ***************/
+#define RTC_BKP14R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP15R register  ***************/
+#define RTC_BKP15R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP16R register  ***************/
+#define RTC_BKP16R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP17R register  ***************/
+#define RTC_BKP17R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP18R register  ***************/
+#define RTC_BKP18R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP19R register  ***************/
+#define RTC_BKP19R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP20R register  ***************/
+#define RTC_BKP20R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP21R register  ***************/
+#define RTC_BKP21R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP22R register  ***************/
+#define RTC_BKP22R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP23R register  ***************/
+#define RTC_BKP23R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP24R register  ***************/
+#define RTC_BKP24R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP25R register  ***************/
+#define RTC_BKP25R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP26R register  ***************/
+#define RTC_BKP26R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP27R register  ***************/
+#define RTC_BKP27R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP28R register  ***************/
+#define RTC_BKP28R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP29R register  ***************/
+#define RTC_BKP29R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP30R register  ***************/
+#define RTC_BKP30R                           ((uint32_t)0xFFFFFFFF)
+
+/********************  Bits definition for RTC_BKP31R register  ***************/
+#define RTC_BKP31R                           ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER                       ((uint32_t)0x00000020)
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                          Serial Audio Interface                            */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for SAI_GCR register  *******************/
+#define  SAI_GCR_SYNCIN                  ((uint32_t)0x00000003)        /*!<SYNCIN[1:0] bits (Synchronization Inputs)   */
+#define  SAI_GCR_SYNCIN_0                ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_GCR_SYNCIN_1                ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  SAI_GCR_SYNCOUT                 ((uint32_t)0x00000030)        /*!<SYNCOUT[1:0] bits (Synchronization Outputs) */
+#define  SAI_GCR_SYNCOUT_0               ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  SAI_GCR_SYNCOUT_1               ((uint32_t)0x00000020)        /*!<Bit 1 */
+
+/*******************  Bit definition for SAI_xCR1 register  *******************/
+#define  SAI_xCR1_MODE                    ((uint32_t)0x00000003)        /*!<MODE[1:0] bits (Audio Block Mode)           */
+#define  SAI_xCR1_MODE_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_xCR1_MODE_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  SAI_xCR1_PRTCFG                  ((uint32_t)0x0000000C)        /*!<PRTCFG[1:0] bits (Protocol Configuration)   */
+#define  SAI_xCR1_PRTCFG_0                ((uint32_t)0x00000004)        /*!<Bit 0 */
+#define  SAI_xCR1_PRTCFG_1                ((uint32_t)0x00000008)        /*!<Bit 1 */
+
+#define  SAI_xCR1_DS                      ((uint32_t)0x000000E0)        /*!<DS[1:0] bits (Data Size) */
+#define  SAI_xCR1_DS_0                    ((uint32_t)0x00000020)        /*!<Bit 0 */
+#define  SAI_xCR1_DS_1                    ((uint32_t)0x00000040)        /*!<Bit 1 */
+#define  SAI_xCR1_DS_2                    ((uint32_t)0x00000080)        /*!<Bit 2 */
+
+#define  SAI_xCR1_LSBFIRST                ((uint32_t)0x00000100)        /*!<LSB First Configuration  */
+#define  SAI_xCR1_CKSTR                   ((uint32_t)0x00000200)        /*!<ClocK STRobing edge      */
+
+#define  SAI_xCR1_SYNCEN                  ((uint32_t)0x00000C00)        /*!<SYNCEN[1:0](SYNChronization ENable) */
+#define  SAI_xCR1_SYNCEN_0                ((uint32_t)0x00000400)        /*!<Bit 0 */
+#define  SAI_xCR1_SYNCEN_1                ((uint32_t)0x00000800)        /*!<Bit 1 */
+
+#define  SAI_xCR1_MONO                    ((uint32_t)0x00001000)        /*!<Mono mode                  */
+#define  SAI_xCR1_OUTDRIV                 ((uint32_t)0x00002000)        /*!<Output Drive               */
+#define  SAI_xCR1_SAIEN                   ((uint32_t)0x00010000)        /*!<Audio Block enable         */
+#define  SAI_xCR1_DMAEN                   ((uint32_t)0x00020000)        /*!<DMA enable                 */
+#define  SAI_xCR1_NODIV                   ((uint32_t)0x00080000)        /*!<No Divider Configuration   */
+
+#define  SAI_xCR1_MCKDIV                  ((uint32_t)0x00F00000)        /*!<MCKDIV[3:0] (Master ClocK Divider)  */
+#define  SAI_xCR1_MCKDIV_0                ((uint32_t)0x00100000)        /*!<Bit 0  */
+#define  SAI_xCR1_MCKDIV_1                ((uint32_t)0x00200000)        /*!<Bit 1  */
+#define  SAI_xCR1_MCKDIV_2                ((uint32_t)0x00400000)        /*!<Bit 2  */
+#define  SAI_xCR1_MCKDIV_3                ((uint32_t)0x00800000)        /*!<Bit 3  */
+
+/*******************  Bit definition for SAI_xCR2 register  *******************/
+#define  SAI_xCR2_FTH                     ((uint32_t)0x00000007)        /*!<FTH[2:0](Fifo THreshold)  */
+#define  SAI_xCR2_FTH_0                   ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_xCR2_FTH_1                   ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  SAI_xCR2_FTH_2                   ((uint32_t)0x00000004)        /*!<Bit 2 */
+
+#define  SAI_xCR2_FFLUSH                  ((uint32_t)0x00000008)        /*!<Fifo FLUSH                       */
+#define  SAI_xCR2_TRIS                    ((uint32_t)0x00000010)        /*!<TRIState Management on data line */
+#define  SAI_xCR2_MUTE                    ((uint32_t)0x00000020)        /*!<Mute mode                        */
+#define  SAI_xCR2_MUTEVAL                 ((uint32_t)0x00000040)        /*!<Muate value                      */
+
+#define  SAI_xCR2_MUTECNT                  ((uint32_t)0x00001F80)       /*!<MUTECNT[5:0] (MUTE counter) */
+#define  SAI_xCR2_MUTECNT_0               ((uint32_t)0x00000080)        /*!<Bit 0 */
+#define  SAI_xCR2_MUTECNT_1               ((uint32_t)0x00000100)        /*!<Bit 1 */
+#define  SAI_xCR2_MUTECNT_2               ((uint32_t)0x00000200)        /*!<Bit 2 */
+#define  SAI_xCR2_MUTECNT_3               ((uint32_t)0x00000400)        /*!<Bit 3 */
+#define  SAI_xCR2_MUTECNT_4               ((uint32_t)0x00000800)        /*!<Bit 4 */
+#define  SAI_xCR2_MUTECNT_5               ((uint32_t)0x00001000)        /*!<Bit 5 */
+
+#define  SAI_xCR2_CPL                     ((uint32_t)0x00002000)        /*!< Complement Bit             */
+
+#define  SAI_xCR2_COMP                    ((uint32_t)0x0000C000)        /*!<COMP[1:0] (Companding mode) */
+#define  SAI_xCR2_COMP_0                  ((uint32_t)0x00004000)        /*!<Bit 0 */
+#define  SAI_xCR2_COMP_1                  ((uint32_t)0x00008000)        /*!<Bit 1 */
+
+/******************  Bit definition for SAI_xFRCR register  *******************/
+#define  SAI_xFRCR_FRL                    ((uint32_t)0x000000FF)        /*!<FRL[1:0](Frame length)  */
+#define  SAI_xFRCR_FRL_0                  ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_xFRCR_FRL_1                  ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  SAI_xFRCR_FRL_2                  ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  SAI_xFRCR_FRL_3                  ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  SAI_xFRCR_FRL_4                  ((uint32_t)0x00000010)        /*!<Bit 4 */
+#define  SAI_xFRCR_FRL_5                  ((uint32_t)0x00000020)        /*!<Bit 5 */
+#define  SAI_xFRCR_FRL_6                  ((uint32_t)0x00000040)        /*!<Bit 6 */
+#define  SAI_xFRCR_FRL_7                  ((uint32_t)0x00000080)        /*!<Bit 7 */
+
+#define  SAI_xFRCR_FSALL                  ((uint32_t)0x00007F00)        /*!<FRL[1:0] (Frame synchronization active level length)  */
+#define  SAI_xFRCR_FSALL_0                ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  SAI_xFRCR_FSALL_1                ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  SAI_xFRCR_FSALL_2                ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  SAI_xFRCR_FSALL_3                ((uint32_t)0x00000800)        /*!<Bit 3 */
+#define  SAI_xFRCR_FSALL_4                ((uint32_t)0x00001000)        /*!<Bit 4 */
+#define  SAI_xFRCR_FSALL_5                ((uint32_t)0x00002000)        /*!<Bit 5 */
+#define  SAI_xFRCR_FSALL_6                ((uint32_t)0x00004000)        /*!<Bit 6 */
+
+#define  SAI_xFRCR_FSDEF                  ((uint32_t)0x00010000)        /*!< Frame Synchronization Definition */
+#define  SAI_xFRCR_FSPO                   ((uint32_t)0x00020000)        /*!<Frame Synchronization POLarity    */
+#define  SAI_xFRCR_FSOFF                  ((uint32_t)0x00040000)        /*!<Frame Synchronization OFFset      */
+
+/******************  Bit definition for SAI_xSLOTR register  *******************/
+#define  SAI_xSLOTR_FBOFF                 ((uint32_t)0x0000001F)        /*!<FRL[4:0](First Bit Offset)  */
+#define  SAI_xSLOTR_FBOFF_0               ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  SAI_xSLOTR_FBOFF_1               ((uint32_t)0x00000002)        /*!<Bit 1 */
+#define  SAI_xSLOTR_FBOFF_2               ((uint32_t)0x00000004)        /*!<Bit 2 */
+#define  SAI_xSLOTR_FBOFF_3               ((uint32_t)0x00000008)        /*!<Bit 3 */
+#define  SAI_xSLOTR_FBOFF_4               ((uint32_t)0x00000010)        /*!<Bit 4 */
+                                     
+#define  SAI_xSLOTR_SLOTSZ                ((uint32_t)0x000000C0)        /*!<SLOTSZ[1:0] (Slot size)  */
+#define  SAI_xSLOTR_SLOTSZ_0              ((uint32_t)0x00000040)        /*!<Bit 0 */
+#define  SAI_xSLOTR_SLOTSZ_1              ((uint32_t)0x00000080)        /*!<Bit 1 */
+
+#define  SAI_xSLOTR_NBSLOT                ((uint32_t)0x00000F00)        /*!<NBSLOT[3:0] (Number of Slot in audio Frame)  */
+#define  SAI_xSLOTR_NBSLOT_0              ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  SAI_xSLOTR_NBSLOT_1              ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  SAI_xSLOTR_NBSLOT_2              ((uint32_t)0x00000400)        /*!<Bit 2 */
+#define  SAI_xSLOTR_NBSLOT_3              ((uint32_t)0x00000800)        /*!<Bit 3 */
+
+#define  SAI_xSLOTR_SLOTEN                ((uint32_t)0xFFFF0000)        /*!<SLOTEN[15:0] (Slot Enable)  */
+
+/*******************  Bit definition for SAI_xIMR register  *******************/
+#define  SAI_xIMR_OVRUDRIE                ((uint32_t)0x00000001)        /*!<Overrun underrun interrupt enable                              */
+#define  SAI_xIMR_MUTEDETIE               ((uint32_t)0x00000002)        /*!<Mute detection interrupt enable                                */
+#define  SAI_xIMR_WCKCFGIE                ((uint32_t)0x00000004)        /*!<Wrong Clock Configuration interrupt enable                     */
+#define  SAI_xIMR_FREQIE                  ((uint32_t)0x00000008)        /*!<FIFO request interrupt enable                                  */
+#define  SAI_xIMR_CNRDYIE                 ((uint32_t)0x00000010)        /*!<Codec not ready interrupt enable                               */
+#define  SAI_xIMR_AFSDETIE                ((uint32_t)0x00000020)        /*!<Anticipated frame synchronization detection interrupt enable   */
+#define  SAI_xIMR_LFSDETIE                ((uint32_t)0x00000040)        /*!<Late frame synchronization detection interrupt enable          */
+
+/********************  Bit definition for SAI_xSR register  *******************/
+#define  SAI_xSR_OVRUDR                   ((uint32_t)0x00000001)         /*!<Overrun underrun                               */
+#define  SAI_xSR_MUTEDET                  ((uint32_t)0x00000002)         /*!<Mute detection                                 */
+#define  SAI_xSR_WCKCFG                   ((uint32_t)0x00000004)         /*!<Wrong Clock Configuration                      */
+#define  SAI_xSR_FREQ                     ((uint32_t)0x00000008)         /*!<FIFO request                                   */
+#define  SAI_xSR_CNRDY                    ((uint32_t)0x00000010)         /*!<Codec not ready                                */
+#define  SAI_xSR_AFSDET                   ((uint32_t)0x00000020)         /*!<Anticipated frame synchronization detection    */
+#define  SAI_xSR_LFSDET                   ((uint32_t)0x00000040)         /*!<Late frame synchronization detection           */
+
+#define  SAI_xSR_FLVL                     ((uint32_t)0x00070000)         /*!<FLVL[2:0] (FIFO Level Threshold)               */
+#define  SAI_xSR_FLVL_0                   ((uint32_t)0x00010000)         /*!<Bit 0 */
+#define  SAI_xSR_FLVL_1                   ((uint32_t)0x00020000)         /*!<Bit 1 */
+#define  SAI_xSR_FLVL_2                   ((uint32_t)0x00040000)         /*!<Bit 2 */
+
+/******************  Bit definition for SAI_xCLRFR register  ******************/
+#define  SAI_xCLRFR_COVRUDR               ((uint32_t)0x00000001)        /*!<Clear Overrun underrun                               */
+#define  SAI_xCLRFR_CMUTEDET              ((uint32_t)0x00000002)        /*!<Clear Mute detection                                 */
+#define  SAI_xCLRFR_CWCKCFG               ((uint32_t)0x00000004)        /*!<Clear Wrong Clock Configuration                      */
+#define  SAI_xCLRFR_CFREQ                 ((uint32_t)0x00000008)        /*!<Clear FIFO request                                   */
+#define  SAI_xCLRFR_CCNRDY                ((uint32_t)0x00000010)        /*!<Clear Codec not ready                                */
+#define  SAI_xCLRFR_CAFSDET               ((uint32_t)0x00000020)        /*!<Clear Anticipated frame synchronization detection    */
+#define  SAI_xCLRFR_CLFSDET               ((uint32_t)0x00000040)        /*!<Clear Late frame synchronization detection           */
+
+/******************  Bit definition for SAI_xDR register  *********************/
+#define  SAI_xDR_DATA                     ((uint32_t)0xFFFFFFFF)        
+
+/******************************************************************************/
+/*                                                                            */
+/*                              SPDIF-RX Interface                            */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for SPDIF_CR register  *******************/
+#define  SPDIFRX_CR_SPDIFEN                  ((uint32_t)0x00000003)        /*!<Peripheral Block Enable                      */
+#define  SPDIFRX_CR_RXDMAEN                  ((uint32_t)0x00000004)        /*!<Receiver DMA Enable for data flow            */
+#define  SPDIFRX_CR_RXSTEO                   ((uint32_t)0x00000008)        /*!<Stereo Mode                                  */
+#define  SPDIFRX_CR_DRFMT                    ((uint32_t)0x00000030)        /*!<RX Data format                               */
+#define  SPDIFRX_CR_PMSK                     ((uint32_t)0x00000040)        /*!<Mask Parity error bit                        */
+#define  SPDIFRX_CR_VMSK                     ((uint32_t)0x00000080)        /*!<Mask of Validity bit                         */
+#define  SPDIFRX_CR_CUMSK                    ((uint32_t)0x00000100)        /*!<Mask of channel status and user bits         */
+#define  SPDIFRX_CR_PTMSK                    ((uint32_t)0x00000200)        /*!<Mask of Preamble Type bits                   */
+#define  SPDIFRX_CR_CBDMAEN                  ((uint32_t)0x00000400)        /*!<Control Buffer DMA ENable for control flow   */
+#define  SPDIFRX_CR_CHSEL                    ((uint32_t)0x00000800)        /*!<Channel Selection                            */
+#define  SPDIFRX_CR_NBTR                     ((uint32_t)0x00003000)        /*!<Maximum allowed re-tries during synchronization phase */
+#define  SPDIFRX_CR_WFA                      ((uint32_t)0x00004000)        /*!<Wait For Activity     */
+#define  SPDIFRX_CR_INSEL                    ((uint32_t)0x00070000)        /*!<SPDIF input selection */
+
+/*******************  Bit definition for SPDIFRX_IMR register  *******************/
+#define  SPDIFRX_IMR_RXNEIE                   ((uint32_t)0x00000001)        /*!<RXNE interrupt enable                              */
+#define  SPDIFRX_IMR_CSRNEIE                  ((uint32_t)0x00000002)        /*!<Control Buffer Ready Interrupt Enable              */
+#define  SPDIFRX_IMR_PERRIE                   ((uint32_t)0x00000004)        /*!<Parity error interrupt enable                      */
+#define  SPDIFRX_IMR_OVRIE                    ((uint32_t)0x00000008)        /*!<Overrun error Interrupt Enable                     */
+#define  SPDIFRX_IMR_SBLKIE                   ((uint32_t)0x00000010)        /*!<Synchronization Block Detected Interrupt Enable    */
+#define  SPDIFRX_IMR_SYNCDIE                  ((uint32_t)0x00000020)        /*!<Synchronization Done                               */
+#define  SPDIFRX_IMR_IFEIE                    ((uint32_t)0x00000040)        /*!<Serial Interface Error Interrupt Enable            */
+
+/*******************  Bit definition for SPDIFRX_SR register  *******************/
+#define  SPDIFRX_SR_RXNE                   ((uint32_t)0x00000001)       /*!<Read data register not empty                          */
+#define  SPDIFRX_SR_CSRNE                  ((uint32_t)0x00000002)       /*!<The Control Buffer register is not empty              */
+#define  SPDIFRX_SR_PERR                   ((uint32_t)0x00000004)       /*!<Parity error                                          */
+#define  SPDIFRX_SR_OVR                    ((uint32_t)0x00000008)       /*!<Overrun error                                         */
+#define  SPDIFRX_SR_SBD                    ((uint32_t)0x00000010)       /*!<Synchronization Block Detected                        */
+#define  SPDIFRX_SR_SYNCD                  ((uint32_t)0x00000020)       /*!<Synchronization Done                                  */
+#define  SPDIFRX_SR_FERR                   ((uint32_t)0x00000040)       /*!<Framing error                                         */
+#define  SPDIFRX_SR_SERR                   ((uint32_t)0x00000080)       /*!<Synchronization error                                 */
+#define  SPDIFRX_SR_TERR                   ((uint32_t)0x00000100)       /*!<Time-out error                                        */
+#define  SPDIFRX_SR_WIDTH5                 ((uint32_t)0x7FFF0000)       /*!<Duration of 5 symbols counted with spdif_clk          */
+
+/*******************  Bit definition for SPDIFRX_IFCR register  *******************/
+#define  SPDIFRX_IFCR_PERRCF               ((uint32_t)0x00000004)       /*!<Clears the Parity error flag                         */
+#define  SPDIFRX_IFCR_OVRCF                ((uint32_t)0x00000008)       /*!<Clears the Overrun error flag                        */
+#define  SPDIFRX_IFCR_SBDCF                ((uint32_t)0x00000010)       /*!<Clears the Synchronization Block Detected flag       */
+#define  SPDIFRX_IFCR_SYNCDCF              ((uint32_t)0x00000020)       /*!<Clears the Synchronization Done flag                 */
+
+/*******************  Bit definition for SPDIFRX_DR register  (DRFMT = 0b00 case) *******************/
+#define  SPDIFRX_DR0_DR                    ((uint32_t)0x00FFFFFF)        /*!<Data value            */
+#define  SPDIFRX_DR0_PE                    ((uint32_t)0x01000000)        /*!<Parity Error bit      */
+#define  SPDIFRX_DR0_V                     ((uint32_t)0x02000000)        /*!<Validity bit          */
+#define  SPDIFRX_DR0_U                     ((uint32_t)0x04000000)        /*!<User bit              */
+#define  SPDIFRX_DR0_C                     ((uint32_t)0x08000000)        /*!<Channel Status bit    */
+#define  SPDIFRX_DR0_PT                    ((uint32_t)0x30000000)        /*!<Preamble Type         */
+
+/*******************  Bit definition for SPDIFRX_DR register  (DRFMT = 0b01 case) *******************/
+#define  SPDIFRX_DR1_DR                    ((uint32_t)0xFFFFFF00)        /*!<Data value            */
+#define  SPDIFRX_DR1_PT                    ((uint32_t)0x00000030)        /*!<Preamble Type         */
+#define  SPDIFRX_DR1_C                     ((uint32_t)0x00000008)        /*!<Channel Status bit    */
+#define  SPDIFRX_DR1_U                     ((uint32_t)0x00000004)        /*!<User bit              */
+#define  SPDIFRX_DR1_V                     ((uint32_t)0x00000002)        /*!<Validity bit          */
+#define  SPDIFRX_DR1_PE                    ((uint32_t)0x00000001)        /*!<Parity Error bit      */
+
+/*******************  Bit definition for SPDIFRX_DR register  (DRFMT = 0b10 case) *******************/
+#define  SPDIFRX_DR1_DRNL1                 ((uint32_t)0xFFFF0000)        /*!<Data value Channel B      */
+#define  SPDIFRX_DR1_DRNL2                 ((uint32_t)0x0000FFFF)        /*!<Data value Channel A      */
+
+/*******************  Bit definition for SPDIFRX_CSR register   *******************/
+#define  SPDIFRX_CSR_USR                     ((uint32_t)0x0000FFFF)        /*!<User data information           */
+#define  SPDIFRX_CSR_CS                      ((uint32_t)0x00FF0000)        /*!<Channel A status information    */
+#define  SPDIFRX_CSR_SOB                     ((uint32_t)0x01000000)        /*!<Start Of Block                  */
+
+/*******************  Bit definition for SPDIFRX_DIR register    *******************/
+#define  SPDIFRX_DIR_THI                 ((uint32_t)0x000013FF)        /*!<Threshold LOW      */
+#define  SPDIFRX_DIR_TLO                 ((uint32_t)0x1FFF0000)        /*!<Threshold HIGH     */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                          SD host Interface                                 */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for SDMMC_POWER register  ******************/
+#define  SDMMC_POWER_PWRCTRL                  ((uint32_t)0x03)               /*!<PWRCTRL[1:0] bits (Power supply control bits) */
+#define  SDMMC_POWER_PWRCTRL_0                ((uint32_t)0x01)               /*!<Bit 0 */
+#define  SDMMC_POWER_PWRCTRL_1                ((uint32_t)0x02)               /*!<Bit 1 */
+
+/******************  Bit definition for SDMMC_CLKCR register  ******************/
+#define  SDMMC_CLKCR_CLKDIV                   ((uint32_t)0x00FF)            /*!<Clock divide factor             */
+#define  SDMMC_CLKCR_CLKEN                    ((uint32_t)0x0100)            /*!<Clock enable bit                */
+#define  SDMMC_CLKCR_PWRSAV                   ((uint32_t)0x0200)            /*!<Power saving configuration bit  */
+#define  SDMMC_CLKCR_BYPASS                   ((uint32_t)0x0400)            /*!<Clock divider bypass enable bit */
+         
+#define  SDMMC_CLKCR_WIDBUS                   ((uint32_t)0x1800)            /*!<WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define  SDMMC_CLKCR_WIDBUS_0                 ((uint32_t)0x0800)            /*!<Bit 0 */
+#define  SDMMC_CLKCR_WIDBUS_1                 ((uint32_t)0x1000)            /*!<Bit 1 */
+         
+#define  SDMMC_CLKCR_NEGEDGE                  ((uint32_t)0x2000)            /*!<SDMMC_CK dephasing selection bit */
+#define  SDMMC_CLKCR_HWFC_EN                  ((uint32_t)0x4000)            /*!<HW Flow Control enable          */
+
+/*******************  Bit definition for SDMMC_ARG register  *******************/
+#define  SDMMC_ARG_CMDARG                     ((uint32_t)0xFFFFFFFF)            /*!<Command argument */
+
+/*******************  Bit definition for SDMMC_CMD register  *******************/
+#define  SDMMC_CMD_CMDINDEX                   ((uint32_t)0x003F)            /*!<Command Index                               */
+         
+#define  SDMMC_CMD_WAITRESP                   ((uint32_t)0x00C0)            /*!<WAITRESP[1:0] bits (Wait for response bits) */
+#define  SDMMC_CMD_WAITRESP_0                 ((uint32_t)0x0040)            /*!< Bit 0 */
+#define  SDMMC_CMD_WAITRESP_1                 ((uint32_t)0x0080)            /*!< Bit 1 */
+         
+#define  SDMMC_CMD_WAITINT                    ((uint32_t)0x0100)            /*!<CPSM Waits for Interrupt Request                               */
+#define  SDMMC_CMD_WAITPEND                   ((uint32_t)0x0200)            /*!<CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define  SDMMC_CMD_CPSMEN                     ((uint32_t)0x0400)            /*!<Command path state machine (CPSM) Enable bit                   */
+#define  SDMMC_CMD_SDIOSUSPEND                ((uint32_t)0x0800)            /*!<SD I/O suspend command                                         */
+
+/*****************  Bit definition for SDMMC_RESPCMD register  *****************/
+#define  SDMMC_RESPCMD_RESPCMD                ((uint32_t)0x3F)               /*!<Response command index */
+
+/******************  Bit definition for SDMMC_RESP0 register  ******************/
+#define  SDMMC_RESP0_CARDSTATUS0              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDMMC_RESP1 register  ******************/
+#define  SDMMC_RESP1_CARDSTATUS1              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDMMC_RESP2 register  ******************/
+#define  SDMMC_RESP2_CARDSTATUS2              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDMMC_RESP3 register  ******************/
+#define  SDMMC_RESP3_CARDSTATUS3              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDMMC_RESP4 register  ******************/
+#define  SDMMC_RESP4_CARDSTATUS4              ((uint32_t)0xFFFFFFFF)        /*!<Card Status */
+
+/******************  Bit definition for SDMMC_DTIMER register  *****************/
+#define  SDMMC_DTIMER_DATATIME                ((uint32_t)0xFFFFFFFF)        /*!<Data timeout period. */
+
+/******************  Bit definition for SDMMC_DLEN register  *******************/
+#define  SDMMC_DLEN_DATALENGTH                ((uint32_t)0x01FFFFFF)        /*!<Data length value    */
+
+/******************  Bit definition for SDMMC_DCTRL register  ******************/
+#define  SDMMC_DCTRL_DTEN                     ((uint32_t)0x0001)            /*!<Data transfer enabled bit         */
+#define  SDMMC_DCTRL_DTDIR                    ((uint32_t)0x0002)            /*!<Data transfer direction selection */
+#define  SDMMC_DCTRL_DTMODE                   ((uint32_t)0x0004)            /*!<Data transfer mode selection      */
+#define  SDMMC_DCTRL_DMAEN                    ((uint32_t)0x0008)            /*!<DMA enabled bit                   */
+
+#define  SDMMC_DCTRL_DBLOCKSIZE               ((uint32_t)0x00F0)            /*!<DBLOCKSIZE[3:0] bits (Data block size) */
+#define  SDMMC_DCTRL_DBLOCKSIZE_0             ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  SDMMC_DCTRL_DBLOCKSIZE_1             ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  SDMMC_DCTRL_DBLOCKSIZE_2             ((uint32_t)0x0040)            /*!<Bit 2 */
+#define  SDMMC_DCTRL_DBLOCKSIZE_3             ((uint32_t)0x0080)            /*!<Bit 3 */
+
+#define  SDMMC_DCTRL_RWSTART                  ((uint32_t)0x0100)            /*!<Read wait start         */
+#define  SDMMC_DCTRL_RWSTOP                   ((uint32_t)0x0200)            /*!<Read wait stop          */
+#define  SDMMC_DCTRL_RWMOD                    ((uint32_t)0x0400)            /*!<Read wait mode          */
+#define  SDMMC_DCTRL_SDIOEN                   ((uint32_t)0x0800)            /*!<SD I/O enable functions */
+
+/******************  Bit definition for SDMMC_DCOUNT register  *****************/
+#define  SDMMC_DCOUNT_DATACOUNT               ((uint32_t)0x01FFFFFF)        /*!<Data count value */
+
+/******************  Bit definition for SDMMC_STA register  ********************/
+#define  SDMMC_STA_CCRCFAIL                   ((uint32_t)0x00000001)        /*!<Command response received (CRC check failed)  */
+#define  SDMMC_STA_DCRCFAIL                   ((uint32_t)0x00000002)        /*!<Data block sent/received (CRC check failed)   */
+#define  SDMMC_STA_CTIMEOUT                   ((uint32_t)0x00000004)        /*!<Command response timeout                      */
+#define  SDMMC_STA_DTIMEOUT                   ((uint32_t)0x00000008)        /*!<Data timeout                                  */
+#define  SDMMC_STA_TXUNDERR                   ((uint32_t)0x00000010)        /*!<Transmit FIFO underrun error                  */
+#define  SDMMC_STA_RXOVERR                    ((uint32_t)0x00000020)        /*!<Received FIFO overrun error                   */
+#define  SDMMC_STA_CMDREND                    ((uint32_t)0x00000040)        /*!<Command response received (CRC check passed)  */
+#define  SDMMC_STA_CMDSENT                    ((uint32_t)0x00000080)        /*!<Command sent (no response required)           */
+#define  SDMMC_STA_DATAEND                    ((uint32_t)0x00000100)        /*!<Data end (data counter, SDIDCOUNT, is zero)   */
+#define  SDMMC_STA_DBCKEND                    ((uint32_t)0x00000400)        /*!<Data block sent/received (CRC check passed)   */
+#define  SDMMC_STA_CMDACT                     ((uint32_t)0x00000800)        /*!<Command transfer in progress                  */
+#define  SDMMC_STA_TXACT                      ((uint32_t)0x00001000)        /*!<Data transmit in progress                     */
+#define  SDMMC_STA_RXACT                      ((uint32_t)0x00002000)        /*!<Data receive in progress                      */
+#define  SDMMC_STA_TXFIFOHE                   ((uint32_t)0x00004000)        /*!<Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define  SDMMC_STA_RXFIFOHF                   ((uint32_t)0x00008000)        /*!<Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define  SDMMC_STA_TXFIFOF                    ((uint32_t)0x00010000)        /*!<Transmit FIFO full                            */
+#define  SDMMC_STA_RXFIFOF                    ((uint32_t)0x00020000)        /*!<Receive FIFO full                             */
+#define  SDMMC_STA_TXFIFOE                    ((uint32_t)0x00040000)        /*!<Transmit FIFO empty                           */
+#define  SDMMC_STA_RXFIFOE                    ((uint32_t)0x00080000)        /*!<Receive FIFO empty                            */
+#define  SDMMC_STA_TXDAVL                     ((uint32_t)0x00100000)        /*!<Data available in transmit FIFO               */
+#define  SDMMC_STA_RXDAVL                     ((uint32_t)0x00200000)        /*!<Data available in receive FIFO                */
+#define  SDMMC_STA_SDIOIT                     ((uint32_t)0x00400000)        /*!<SDMMC interrupt received                       */
+
+/*******************  Bit definition for SDMMC_ICR register  *******************/
+#define  SDMMC_ICR_CCRCFAILC                  ((uint32_t)0x00000001)        /*!<CCRCFAIL flag clear bit */
+#define  SDMMC_ICR_DCRCFAILC                  ((uint32_t)0x00000002)        /*!<DCRCFAIL flag clear bit */
+#define  SDMMC_ICR_CTIMEOUTC                  ((uint32_t)0x00000004)        /*!<CTIMEOUT flag clear bit */
+#define  SDMMC_ICR_DTIMEOUTC                  ((uint32_t)0x00000008)        /*!<DTIMEOUT flag clear bit */
+#define  SDMMC_ICR_TXUNDERRC                  ((uint32_t)0x00000010)        /*!<TXUNDERR flag clear bit */
+#define  SDMMC_ICR_RXOVERRC                   ((uint32_t)0x00000020)        /*!<RXOVERR flag clear bit  */
+#define  SDMMC_ICR_CMDRENDC                   ((uint32_t)0x00000040)        /*!<CMDREND flag clear bit  */
+#define  SDMMC_ICR_CMDSENTC                   ((uint32_t)0x00000080)        /*!<CMDSENT flag clear bit  */
+#define  SDMMC_ICR_DATAENDC                   ((uint32_t)0x00000100)        /*!<DATAEND flag clear bit  */
+#define  SDMMC_ICR_DBCKENDC                   ((uint32_t)0x00000400)        /*!<DBCKEND flag clear bit  */
+#define  SDMMC_ICR_SDIOITC                    ((uint32_t)0x00400000)        /*!<SDMMCIT flag clear bit   */
+
+/******************  Bit definition for SDMMC_MASK register  *******************/
+#define  SDMMC_MASK_CCRCFAILIE                ((uint32_t)0x00000001)        /*!<Command CRC Fail Interrupt Enable          */
+#define  SDMMC_MASK_DCRCFAILIE                ((uint32_t)0x00000002)        /*!<Data CRC Fail Interrupt Enable             */
+#define  SDMMC_MASK_CTIMEOUTIE                ((uint32_t)0x00000004)        /*!<Command TimeOut Interrupt Enable           */
+#define  SDMMC_MASK_DTIMEOUTIE                ((uint32_t)0x00000008)        /*!<Data TimeOut Interrupt Enable              */
+#define  SDMMC_MASK_TXUNDERRIE                ((uint32_t)0x00000010)        /*!<Tx FIFO UnderRun Error Interrupt Enable    */
+#define  SDMMC_MASK_RXOVERRIE                 ((uint32_t)0x00000020)        /*!<Rx FIFO OverRun Error Interrupt Enable     */
+#define  SDMMC_MASK_CMDRENDIE                 ((uint32_t)0x00000040)        /*!<Command Response Received Interrupt Enable */
+#define  SDMMC_MASK_CMDSENTIE                 ((uint32_t)0x00000080)        /*!<Command Sent Interrupt Enable              */
+#define  SDMMC_MASK_DATAENDIE                 ((uint32_t)0x00000100)        /*!<Data End Interrupt Enable                  */
+#define  SDMMC_MASK_DBCKENDIE                 ((uint32_t)0x00000400)        /*!<Data Block End Interrupt Enable            */
+#define  SDMMC_MASK_CMDACTIE                  ((uint32_t)0x00000800)        /*!<CCommand Acting Interrupt Enable           */
+#define  SDMMC_MASK_TXACTIE                   ((uint32_t)0x00001000)        /*!<Data Transmit Acting Interrupt Enable      */
+#define  SDMMC_MASK_RXACTIE                   ((uint32_t)0x00002000)        /*!<Data receive acting interrupt enabled      */
+#define  SDMMC_MASK_TXFIFOHEIE                ((uint32_t)0x00004000)        /*!<Tx FIFO Half Empty interrupt Enable        */
+#define  SDMMC_MASK_RXFIFOHFIE                ((uint32_t)0x00008000)        /*!<Rx FIFO Half Full interrupt Enable         */
+#define  SDMMC_MASK_TXFIFOFIE                 ((uint32_t)0x00010000)        /*!<Tx FIFO Full interrupt Enable              */
+#define  SDMMC_MASK_RXFIFOFIE                 ((uint32_t)0x00020000)        /*!<Rx FIFO Full interrupt Enable              */
+#define  SDMMC_MASK_TXFIFOEIE                 ((uint32_t)0x00040000)        /*!<Tx FIFO Empty interrupt Enable             */
+#define  SDMMC_MASK_RXFIFOEIE                 ((uint32_t)0x00080000)        /*!<Rx FIFO Empty interrupt Enable             */
+#define  SDMMC_MASK_TXDAVLIE                  ((uint32_t)0x00100000)        /*!<Data available in Tx FIFO interrupt Enable */
+#define  SDMMC_MASK_RXDAVLIE                  ((uint32_t)0x00200000)        /*!<Data available in Rx FIFO interrupt Enable */
+#define  SDMMC_MASK_SDIOITIE                  ((uint32_t)0x00400000)        /*!<SDMMC Mode Interrupt Received interrupt Enable */
+
+/*****************  Bit definition for SDMMC_FIFOCNT register  *****************/
+#define  SDMMC_FIFOCNT_FIFOCOUNT              ((uint32_t)0x00FFFFFF)        /*!<Remaining number of words to be written to or read from the FIFO */
+
+/******************  Bit definition for SDMMC_FIFO register  *******************/
+#define  SDMMC_FIFO_FIFODATA                  ((uint32_t)0xFFFFFFFF)        /*!<Receive and transmit FIFO data */
+
+/******************************************************************************/
+/*                                                                            */
+/*                        Serial Peripheral Interface (SPI)                   */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for SPI_CR1 register  ********************/
+#define  SPI_CR1_CPHA                        ((uint32_t)0x00000001)        /*!< Clock Phase                        */
+#define  SPI_CR1_CPOL                        ((uint32_t)0x00000002)        /*!< Clock Polarity                     */
+#define  SPI_CR1_MSTR                        ((uint32_t)0x00000004)        /*!< Master Selection                   */
+#define  SPI_CR1_BR                          ((uint32_t)0x00000038)        /*!< BR[2:0] bits (Baud Rate Control)   */
+#define  SPI_CR1_BR_0                        ((uint32_t)0x00000008)        /*!< Bit 0 */
+#define  SPI_CR1_BR_1                        ((uint32_t)0x00000010)        /*!< Bit 1 */
+#define  SPI_CR1_BR_2                        ((uint32_t)0x00000020)        /*!< Bit 2 */
+#define  SPI_CR1_SPE                         ((uint32_t)0x00000040)        /*!< SPI Enable                          */
+#define  SPI_CR1_LSBFIRST                    ((uint32_t)0x00000080)        /*!< Frame Format                        */
+#define  SPI_CR1_SSI                         ((uint32_t)0x00000100)        /*!< Internal slave select               */
+#define  SPI_CR1_SSM                         ((uint32_t)0x00000200)        /*!< Software slave management           */
+#define  SPI_CR1_RXONLY                      ((uint32_t)0x00000400)        /*!< Receive only                        */
+#define  SPI_CR1_CRCL                        ((uint32_t)0x00000800)        /*!< CRC Length                          */
+#define  SPI_CR1_CRCNEXT                     ((uint32_t)0x00001000)        /*!< Transmit CRC next                   */
+#define  SPI_CR1_CRCEN                       ((uint32_t)0x00002000)        /*!< Hardware CRC calculation enable     */
+#define  SPI_CR1_BIDIOE                      ((uint32_t)0x00004000)        /*!< Output enable in bidirectional mode */
+#define  SPI_CR1_BIDIMODE                    ((uint32_t)0x00008000)        /*!< Bidirectional data mode enable      */
+
+/*******************  Bit definition for SPI_CR2 register  ********************/
+#define  SPI_CR2_RXDMAEN                     ((uint32_t)0x00000001)        /*!< Rx Buffer DMA Enable                 */
+#define  SPI_CR2_TXDMAEN                     ((uint32_t)0x00000002)        /*!< Tx Buffer DMA Enable                 */
+#define  SPI_CR2_SSOE                        ((uint32_t)0x00000004)        /*!< SS Output Enable                     */
+#define  SPI_CR2_NSSP                        ((uint32_t)0x00000008)        /*!< NSS pulse management Enable          */
+#define  SPI_CR2_FRF                         ((uint32_t)0x00000010)        /*!< Frame Format Enable                  */
+#define  SPI_CR2_ERRIE                       ((uint32_t)0x00000020)        /*!< Error Interrupt Enable               */
+#define  SPI_CR2_RXNEIE                      ((uint32_t)0x00000040)        /*!< RX buffer Not Empty Interrupt Enable */
+#define  SPI_CR2_TXEIE                       ((uint32_t)0x00000080)        /*!< Tx buffer Empty Interrupt Enable     */
+#define  SPI_CR2_DS                          ((uint32_t)0x00000F00)        /*!< DS[3:0] Data Size                    */
+#define  SPI_CR2_DS_0                        ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  SPI_CR2_DS_1                        ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  SPI_CR2_DS_2                        ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  SPI_CR2_DS_3                        ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  SPI_CR2_FRXTH                       ((uint32_t)0x00001000)        /*!< FIFO reception Threshold           */
+#define  SPI_CR2_LDMARX                      ((uint32_t)0x00002000)        /*!< Last DMA transfer for reception    */
+#define  SPI_CR2_LDMATX                      ((uint32_t)0x00004000)        /*!< Last DMA transfer for transmission */
+
+/********************  Bit definition for SPI_SR register  ********************/
+#define  SPI_SR_RXNE                         ((uint32_t)0x00000001)        /*!< Receive buffer Not Empty  */
+#define  SPI_SR_TXE                          ((uint32_t)0x00000002)        /*!< Transmit buffer Empty     */
+#define  SPI_SR_CHSIDE                       ((uint32_t)0x00000004)        /*!< Channel side              */
+#define  SPI_SR_UDR                          ((uint32_t)0x00000008)        /*!< Underrun flag             */
+#define  SPI_SR_CRCERR                       ((uint32_t)0x00000010)        /*!< CRC Error flag            */
+#define  SPI_SR_MODF                         ((uint32_t)0x00000020)        /*!< Mode fault                */
+#define  SPI_SR_OVR                          ((uint32_t)0x00000040)        /*!< Overrun flag              */
+#define  SPI_SR_BSY                          ((uint32_t)0x00000080)        /*!< Busy flag                 */
+#define  SPI_SR_FRE                          ((uint32_t)0x00000100)        /*!< TI frame format error     */
+#define  SPI_SR_FRLVL                        ((uint32_t)0x00000600)        /*!< FIFO Reception Level      */
+#define  SPI_SR_FRLVL_0                      ((uint32_t)0x00000200)        /*!< Bit 0 */
+#define  SPI_SR_FRLVL_1                      ((uint32_t)0x00000400)        /*!< Bit 1 */
+#define  SPI_SR_FTLVL                        ((uint32_t)0x00001800)        /*!< FIFO Transmission Level   */
+#define  SPI_SR_FTLVL_0                      ((uint32_t)0x00000800)        /*!< Bit 0 */
+#define  SPI_SR_FTLVL_1                      ((uint32_t)0x00001000)        /*!< Bit 1 */  
+
+/********************  Bit definition for SPI_DR register  ********************/
+#define  SPI_DR_DR                           ((uint32_t)0xFFFF)            /*!< Data Register */
+
+/*******************  Bit definition for SPI_CRCPR register  ******************/
+#define  SPI_CRCPR_CRCPOLY                   ((uint32_t)0xFFFF)            /*!< CRC polynomial register */
+
+/******************  Bit definition for SPI_RXCRCR register  ******************/
+#define  SPI_RXCRCR_RXCRC                    ((uint32_t)0xFFFF)            /*!< Rx CRC Register */
+
+/******************  Bit definition for SPI_TXCRCR register  ******************/
+#define  SPI_TXCRCR_TXCRC                    ((uint32_t)0xFFFF)            /*!< Tx CRC Register */
+
+/******************  Bit definition for SPI_I2SCFGR register  *****************/
+#define  SPI_I2SCFGR_CHLEN                   ((uint32_t)0x00000001)        /*!<Channel length (number of bits per audio channel) */
+#define  SPI_I2SCFGR_DATLEN                  ((uint32_t)0x00000006)        /*!<DATLEN[1:0] bits (Data length to be transferred)  */
+#define  SPI_I2SCFGR_DATLEN_0                ((uint32_t)0x00000002)        /*!<Bit 0 */
+#define  SPI_I2SCFGR_DATLEN_1                ((uint32_t)0x00000004)        /*!<Bit 1 */
+#define  SPI_I2SCFGR_CKPOL                   ((uint32_t)0x00000008)        /*!<steady state clock polarity                       */
+#define  SPI_I2SCFGR_I2SSTD                  ((uint32_t)0x00000030)        /*!<I2SSTD[1:0] bits (I2S standard selection)         */
+#define  SPI_I2SCFGR_I2SSTD_0                ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  SPI_I2SCFGR_I2SSTD_1                ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  SPI_I2SCFGR_PCMSYNC                 ((uint32_t)0x00000080)        /*!<PCM frame synchronization                         */
+#define  SPI_I2SCFGR_I2SCFG                  ((uint32_t)0x00000300)        /*!<I2SCFG[1:0] bits (I2S configuration mode)         */
+#define  SPI_I2SCFGR_I2SCFG_0                ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  SPI_I2SCFGR_I2SCFG_1                ((uint32_t)0x00000200)        /*!<Bit 1 */
+#define  SPI_I2SCFGR_I2SE                    ((uint32_t)0x00000400)        /*!<I2S Enable                                        */
+#define  SPI_I2SCFGR_I2SMOD                  ((uint32_t)0x00000800)        /*!<I2S mode selection                                */
+#define  SPI_I2SCFGR_ASTRTEN                 ((uint32_t)0x00001000)        /*!<Asynchronous start enable                        */
+
+/******************  Bit definition for SPI_I2SPR register  *******************/
+#define  SPI_I2SPR_I2SDIV                    ((uint32_t)0x00FF)            /*!<I2S Linear prescaler         */
+#define  SPI_I2SPR_ODD                       ((uint32_t)0x0100)            /*!<Odd factor for the prescaler */
+#define  SPI_I2SPR_MCKOE                     ((uint32_t)0x0200)            /*!<Master Clock Output Enable   */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                                 SYSCFG                                     */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for SYSCFG_MEMRMP register  ***************/  
+#define SYSCFG_MEMRMP_MEM_BOOT         ((uint32_t)0x00000001) /*!< Boot information after Reset */
+
+
+#define SYSCFG_MEMRMP_SWP_FMC          ((uint32_t)0x00000C00) /*!< FMC Memory Mapping swapping */
+#define SYSCFG_MEMRMP_SWP_FMC_0        ((uint32_t)0x00000400) 
+#define SYSCFG_MEMRMP_SWP_FMC_1        ((uint32_t)0x00000800) 
+
+/******************  Bit definition for SYSCFG_PMC register  ******************/
+
+#define SYSCFG_PMC_ADCxDC2              ((uint32_t)0x00070000) /*!< Refer to AN4073 on how to use this bit  */
+#define SYSCFG_PMC_ADC1DC2              ((uint32_t)0x00010000) /*!< Refer to AN4073 on how to use this bit  */
+#define SYSCFG_PMC_ADC2DC2              ((uint32_t)0x00020000) /*!< Refer to AN4073 on how to use this bit  */
+#define SYSCFG_PMC_ADC3DC2              ((uint32_t)0x00040000) /*!< Refer to AN4073 on how to use this bit  */
+
+#define SYSCFG_PMC_MII_RMII_SEL         ((uint32_t)0x00800000) /*!<Ethernet PHY interface selection */
+
+/*****************  Bit definition for SYSCFG_EXTICR1 register  ***************/
+#define SYSCFG_EXTICR1_EXTI0            ((uint32_t)0x000F) /*!<EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1            ((uint32_t)0x00F0) /*!<EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2            ((uint32_t)0x0F00) /*!<EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3            ((uint32_t)0xF000) /*!<EXTI 3 configuration */
+/** 
+  * @brief   EXTI0 configuration  
+  */ 
+#define SYSCFG_EXTICR1_EXTI0_PA         ((uint32_t)0x0000) /*!<PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB         ((uint32_t)0x0001) /*!<PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC         ((uint32_t)0x0002) /*!<PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD         ((uint32_t)0x0003) /*!<PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE         ((uint32_t)0x0004) /*!<PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF         ((uint32_t)0x0005) /*!<PF[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PG         ((uint32_t)0x0006) /*!<PG[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH         ((uint32_t)0x0007) /*!<PH[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PI         ((uint32_t)0x0008) /*!<PI[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PJ         ((uint32_t)0x0009) /*!<PJ[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PK         ((uint32_t)0x000A) /*!<PK[0] pin */
+
+/** 
+  * @brief   EXTI1 configuration  
+  */ 
+#define SYSCFG_EXTICR1_EXTI1_PA         ((uint32_t)0x0000) /*!<PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB         ((uint32_t)0x0010) /*!<PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC         ((uint32_t)0x0020) /*!<PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD         ((uint32_t)0x0030) /*!<PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE         ((uint32_t)0x0040) /*!<PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF         ((uint32_t)0x0050) /*!<PF[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PG         ((uint32_t)0x0060) /*!<PG[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH         ((uint32_t)0x0070) /*!<PH[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PI         ((uint32_t)0x0080) /*!<PI[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PJ         ((uint32_t)0x0090) /*!<PJ[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PK         ((uint32_t)0x00A0) /*!<PK[1] pin */
+
+/** 
+  * @brief   EXTI2 configuration  
+  */ 
+#define SYSCFG_EXTICR1_EXTI2_PA         ((uint32_t)0x0000) /*!<PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB         ((uint32_t)0x0100) /*!<PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC         ((uint32_t)0x0200) /*!<PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD         ((uint32_t)0x0300) /*!<PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE         ((uint32_t)0x0400) /*!<PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF         ((uint32_t)0x0500) /*!<PF[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PG         ((uint32_t)0x0600) /*!<PG[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH         ((uint32_t)0x0700) /*!<PH[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PI         ((uint32_t)0x0800) /*!<PI[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PJ         ((uint32_t)0x0900) /*!<PJ[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PK         ((uint32_t)0x0A00) /*!<PK[2] pin */
+
+/** 
+  * @brief   EXTI3 configuration  
+  */ 
+#define SYSCFG_EXTICR1_EXTI3_PA         ((uint32_t)0x0000) /*!<PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB         ((uint32_t)0x1000) /*!<PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC         ((uint32_t)0x2000) /*!<PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD         ((uint32_t)0x3000) /*!<PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE         ((uint32_t)0x4000) /*!<PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF         ((uint32_t)0x5000) /*!<PF[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PG         ((uint32_t)0x6000) /*!<PG[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PH         ((uint32_t)0x7000) /*!<PH[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PI         ((uint32_t)0x8000) /*!<PI[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PJ         ((uint32_t)0x9000) /*!<PJ[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PK         ((uint32_t)0xA000) /*!<PK[3] pin */
+
+/*****************  Bit definition for SYSCFG_EXTICR2 register  ***************/
+#define SYSCFG_EXTICR2_EXTI4            ((uint32_t)0x000F) /*!<EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5            ((uint32_t)0x00F0) /*!<EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6            ((uint32_t)0x0F00) /*!<EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7            ((uint32_t)0xF000) /*!<EXTI 7 configuration */
+/** 
+  * @brief   EXTI4 configuration  
+  */ 
+#define SYSCFG_EXTICR2_EXTI4_PA         ((uint32_t)0x0000) /*!<PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB         ((uint32_t)0x0001) /*!<PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC         ((uint32_t)0x0002) /*!<PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD         ((uint32_t)0x0003) /*!<PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE         ((uint32_t)0x0004) /*!<PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF         ((uint32_t)0x0005) /*!<PF[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PG         ((uint32_t)0x0006) /*!<PG[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH         ((uint32_t)0x0007) /*!<PH[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PI         ((uint32_t)0x0008) /*!<PI[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PJ         ((uint32_t)0x0009) /*!<PJ[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PK         ((uint32_t)0x000A) /*!<PK[4] pin */
+
+/** 
+  * @brief   EXTI5 configuration  
+  */ 
+#define SYSCFG_EXTICR2_EXTI5_PA         ((uint32_t)0x0000) /*!<PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB         ((uint32_t)0x0010) /*!<PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC         ((uint32_t)0x0020) /*!<PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD         ((uint32_t)0x0030) /*!<PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE         ((uint32_t)0x0040) /*!<PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF         ((uint32_t)0x0050) /*!<PF[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PG         ((uint32_t)0x0060) /*!<PG[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PH         ((uint32_t)0x0070) /*!<PH[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PI         ((uint32_t)0x0080) /*!<PI[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PJ         ((uint32_t)0x0090) /*!<PJ[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PK         ((uint32_t)0x00A0) /*!<PK[5] pin */
+
+/** 
+  * @brief   EXTI6 configuration  
+  */ 
+#define SYSCFG_EXTICR2_EXTI6_PA         ((uint32_t)0x0000) /*!<PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB         ((uint32_t)0x0100) /*!<PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC         ((uint32_t)0x0200) /*!<PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD         ((uint32_t)0x0300) /*!<PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE         ((uint32_t)0x0400) /*!<PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF         ((uint32_t)0x0500) /*!<PF[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PG         ((uint32_t)0x0600) /*!<PG[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PH         ((uint32_t)0x0700) /*!<PH[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PI         ((uint32_t)0x0800) /*!<PI[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PJ         ((uint32_t)0x0900) /*!<PJ[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PK         ((uint32_t)0x0A00) /*!<PK[6] pin */
+
+/** 
+  * @brief   EXTI7 configuration  
+  */ 
+#define SYSCFG_EXTICR2_EXTI7_PA         ((uint32_t)0x0000) /*!<PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB         ((uint32_t)0x1000) /*!<PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC         ((uint32_t)0x2000) /*!<PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD         ((uint32_t)0x3000) /*!<PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE         ((uint32_t)0x4000) /*!<PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF         ((uint32_t)0x5000) /*!<PF[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PG         ((uint32_t)0x6000) /*!<PG[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PH         ((uint32_t)0x7000) /*!<PH[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PI         ((uint32_t)0x8000) /*!<PI[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PJ         ((uint32_t)0x9000) /*!<PJ[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PK         ((uint32_t)0xA000) /*!<PK[7] pin */
+
+/*****************  Bit definition for SYSCFG_EXTICR3 register  ***************/
+#define SYSCFG_EXTICR3_EXTI8            ((uint32_t)0x000F) /*!<EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9            ((uint32_t)0x00F0) /*!<EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10           ((uint32_t)0x0F00) /*!<EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11           ((uint32_t)0xF000) /*!<EXTI 11 configuration */
+           
+/** 
+  * @brief   EXTI8 configuration  
+  */ 
+#define SYSCFG_EXTICR3_EXTI8_PA         ((uint32_t)0x0000) /*!<PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB         ((uint32_t)0x0001) /*!<PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC         ((uint32_t)0x0002) /*!<PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD         ((uint32_t)0x0003) /*!<PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE         ((uint32_t)0x0004) /*!<PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF         ((uint32_t)0x0005) /*!<PF[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PG         ((uint32_t)0x0006) /*!<PG[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PH         ((uint32_t)0x0007) /*!<PH[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PI         ((uint32_t)0x0008) /*!<PI[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PJ         ((uint32_t)0x0009) /*!<PJ[8] pin */
+
+/** 
+  * @brief   EXTI9 configuration  
+  */ 
+#define SYSCFG_EXTICR3_EXTI9_PA         ((uint32_t)0x0000) /*!<PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB         ((uint32_t)0x0010) /*!<PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC         ((uint32_t)0x0020) /*!<PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD         ((uint32_t)0x0030) /*!<PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE         ((uint32_t)0x0040) /*!<PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF         ((uint32_t)0x0050) /*!<PF[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PG         ((uint32_t)0x0060) /*!<PG[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PH         ((uint32_t)0x0070) /*!<PH[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PI         ((uint32_t)0x0080) /*!<PI[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PJ         ((uint32_t)0x0090) /*!<PJ[9] pin */
+
+/** 
+  * @brief   EXTI10 configuration  
+  */ 
+#define SYSCFG_EXTICR3_EXTI10_PA        ((uint32_t)0x0000) /*!<PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB        ((uint32_t)0x0100) /*!<PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC        ((uint32_t)0x0200) /*!<PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD        ((uint32_t)0x0300) /*!<PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE        ((uint32_t)0x0400) /*!<PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF        ((uint32_t)0x0500) /*!<PF[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PG        ((uint32_t)0x0600) /*!<PG[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PH        ((uint32_t)0x0700) /*!<PH[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PI        ((uint32_t)0x0800) /*!<PI[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PJ        ((uint32_t)0x0900) /*!<PJ[10] pin */
+
+/** 
+  * @brief   EXTI11 configuration  
+  */ 
+#define SYSCFG_EXTICR3_EXTI11_PA        ((uint32_t)0x0000) /*!<PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB        ((uint32_t)0x1000) /*!<PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC        ((uint32_t)0x2000) /*!<PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD        ((uint32_t)0x3000) /*!<PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE        ((uint32_t)0x4000) /*!<PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF        ((uint32_t)0x5000) /*!<PF[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PG        ((uint32_t)0x6000) /*!<PG[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PH        ((uint32_t)0x7000) /*!<PH[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PI        ((uint32_t)0x8000) /*!<PI[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PJ        ((uint32_t)0x9000) /*!<PJ[11] pin */
+
+
+/*****************  Bit definition for SYSCFG_EXTICR4 register  ***************/
+#define SYSCFG_EXTICR4_EXTI12           ((uint32_t)0x000F) /*!<EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13           ((uint32_t)0x00F0) /*!<EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14           ((uint32_t)0x0F00) /*!<EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15           ((uint32_t)0xF000) /*!<EXTI 15 configuration */
+/** 
+  * @brief   EXTI12 configuration  
+  */ 
+#define SYSCFG_EXTICR4_EXTI12_PA        ((uint32_t)0x0000) /*!<PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB        ((uint32_t)0x0001) /*!<PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC        ((uint32_t)0x0002) /*!<PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD        ((uint32_t)0x0003) /*!<PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE        ((uint32_t)0x0004) /*!<PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF        ((uint32_t)0x0005) /*!<PF[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PG        ((uint32_t)0x0006) /*!<PG[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PH        ((uint32_t)0x0007) /*!<PH[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PI        ((uint32_t)0x0008) /*!<PI[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PJ        ((uint32_t)0x0009) /*!<PJ[12] pin */
+
+/** 
+  * @brief   EXTI13 configuration  
+  */ 
+#define SYSCFG_EXTICR4_EXTI13_PA        ((uint32_t)0x0000) /*!<PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB        ((uint32_t)0x0010) /*!<PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC        ((uint32_t)0x0020) /*!<PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD        ((uint32_t)0x0030) /*!<PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE        ((uint32_t)0x0040) /*!<PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF        ((uint32_t)0x0050) /*!<PF[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PG        ((uint32_t)0x0060) /*!<PG[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PH        ((uint32_t)0x0070) /*!<PH[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PI        ((uint32_t)0x0008) /*!<PI[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PJ        ((uint32_t)0x0009) /*!<PJ[13] pin */
+
+/** 
+  * @brief   EXTI14 configuration  
+  */ 
+#define SYSCFG_EXTICR4_EXTI14_PA        ((uint32_t)0x0000) /*!<PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB        ((uint32_t)0x0100) /*!<PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC        ((uint32_t)0x0200) /*!<PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD        ((uint32_t)0x0300) /*!<PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE        ((uint32_t)0x0400) /*!<PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF        ((uint32_t)0x0500) /*!<PF[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PG        ((uint32_t)0x0600) /*!<PG[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PH        ((uint32_t)0x0700) /*!<PH[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PI        ((uint32_t)0x0800) /*!<PI[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PJ        ((uint32_t)0x0900) /*!<PJ[14] pin */
+
+/** 
+  * @brief   EXTI15 configuration  
+  */ 
+#define SYSCFG_EXTICR4_EXTI15_PA        ((uint32_t)0x0000) /*!<PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB        ((uint32_t)0x1000) /*!<PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC        ((uint32_t)0x2000) /*!<PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD        ((uint32_t)0x3000) /*!<PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE        ((uint32_t)0x4000) /*!<PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF        ((uint32_t)0x5000) /*!<PF[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PG        ((uint32_t)0x6000) /*!<PG[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PH        ((uint32_t)0x7000) /*!<PH[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PI        ((uint32_t)0x8000) /*!<PI[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PJ        ((uint32_t)0x9000) /*!<PJ[15] pin */
+
+/******************  Bit definition for SYSCFG_CMPCR register  ****************/  
+#define SYSCFG_CMPCR_CMP_PD             ((uint32_t)0x00000001) /*!<Compensation cell power-down */
+#define SYSCFG_CMPCR_READY              ((uint32_t)0x00000100) /*!<Compensation cell ready flag*/
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    TIM                                     */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for TIM_CR1 register  ********************/
+#define  TIM_CR1_CEN                         ((uint32_t)0x0001)            /*!<Counter enable        */
+#define  TIM_CR1_UDIS                        ((uint32_t)0x0002)            /*!<Update disable        */
+#define  TIM_CR1_URS                         ((uint32_t)0x0004)            /*!<Update request source */
+#define  TIM_CR1_OPM                         ((uint32_t)0x0008)            /*!<One pulse mode        */
+#define  TIM_CR1_DIR                         ((uint32_t)0x0010)            /*!<Direction             */
+
+#define  TIM_CR1_CMS                         ((uint32_t)0x0060)            /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define  TIM_CR1_CMS_0                       ((uint32_t)0x0020)            /*!<Bit 0 */
+#define  TIM_CR1_CMS_1                       ((uint32_t)0x0040)            /*!<Bit 1 */
+
+#define  TIM_CR1_ARPE                        ((uint32_t)0x0080)            /*!<Auto-reload preload enable     */
+
+#define  TIM_CR1_CKD                         ((uint32_t)0x0300)            /*!<CKD[1:0] bits (clock division) */
+#define  TIM_CR1_CKD_0                       ((uint32_t)0x0100)            /*!<Bit 0 */
+#define  TIM_CR1_CKD_1                       ((uint32_t)0x0200)            /*!<Bit 1 */
+#define  TIM_CR1_UIFREMAP                    ((uint32_t)0x0800)            /*!<UIF status bit */
+
+/*******************  Bit definition for TIM_CR2 register  ********************/
+#define  TIM_CR2_CCPC                        ((uint32_t)0x00000001)            /*!<Capture/Compare Preloaded Control        */
+#define  TIM_CR2_CCUS                        ((uint32_t)0x00000004)            /*!<Capture/Compare Control Update Selection */
+#define  TIM_CR2_CCDS                        ((uint32_t)0x00000008)            /*!<Capture/Compare DMA Selection            */
+
+#define  TIM_CR2_OIS5                        ((uint32_t)0x00010000)            /*!<Output Idle state 4 (OC4 output) */
+#define  TIM_CR2_OIS6                        ((uint32_t)0x00040000)            /*!<Output Idle state 4 (OC4 output) */
+
+#define  TIM_CR2_MMS                         ((uint32_t)0x0070)            /*!<MMS[2:0] bits (Master Mode Selection) */
+#define  TIM_CR2_MMS_0                       ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_CR2_MMS_1                       ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_CR2_MMS_2                       ((uint32_t)0x0040)            /*!<Bit 2 */
+
+#define  TIM_CR2_MMS2                        ((uint32_t)0x00F00000)            /*!<MMS[2:0] bits (Master Mode Selection) */
+#define  TIM_CR2_MMS2_0                      ((uint32_t)0x00100000)            /*!<Bit 0 */
+#define  TIM_CR2_MMS2_1                      ((uint32_t)0x00200000)            /*!<Bit 1 */
+#define  TIM_CR2_MMS2_2                      ((uint32_t)0x00400000)            /*!<Bit 2 */
+#define  TIM_CR2_MMS2_3                      ((uint32_t)0x00800000)            /*!<Bit 2 */
+
+#define  TIM_CR2_TI1S                        ((uint32_t)0x0080)            /*!<TI1 Selection */
+#define  TIM_CR2_OIS1                        ((uint32_t)0x0100)            /*!<Output Idle state 1 (OC1 output)  */
+#define  TIM_CR2_OIS1N                       ((uint32_t)0x0200)            /*!<Output Idle state 1 (OC1N output) */
+#define  TIM_CR2_OIS2                        ((uint32_t)0x0400)            /*!<Output Idle state 2 (OC2 output)  */
+#define  TIM_CR2_OIS2N                       ((uint32_t)0x0800)            /*!<Output Idle state 2 (OC2N output) */
+#define  TIM_CR2_OIS3                        ((uint32_t)0x1000)            /*!<Output Idle state 3 (OC3 output)  */
+#define  TIM_CR2_OIS3N                       ((uint32_t)0x2000)            /*!<Output Idle state 3 (OC3N output) */
+#define  TIM_CR2_OIS4                        ((uint32_t)0x4000)            /*!<Output Idle state 4 (OC4 output)  */
+
+/*******************  Bit definition for TIM_SMCR register  *******************/
+#define  TIM_SMCR_SMS                        ((uint32_t)0x00010007)            /*!<SMS[2:0] bits (Slave mode selection)    */
+#define  TIM_SMCR_SMS_0                      ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define  TIM_SMCR_SMS_1                      ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define  TIM_SMCR_SMS_2                      ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define  TIM_SMCR_SMS_3                      ((uint32_t)0x00010000)            /*!<Bit 3 */
+#define  TIM_SMCR_OCCS                       ((uint32_t)0x00000008)            /*!< OCREF clear selection */
+
+#define  TIM_SMCR_TS                         ((uint32_t)0x0070)            /*!<TS[2:0] bits (Trigger selection)        */
+#define  TIM_SMCR_TS_0                       ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_SMCR_TS_1                       ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_SMCR_TS_2                       ((uint32_t)0x0040)            /*!<Bit 2 */
+
+#define  TIM_SMCR_MSM                        ((uint32_t)0x0080)            /*!<Master/slave mode                       */
+
+#define  TIM_SMCR_ETF                        ((uint32_t)0x0F00)            /*!<ETF[3:0] bits (External trigger filter) */
+#define  TIM_SMCR_ETF_0                      ((uint32_t)0x0100)            /*!<Bit 0 */
+#define  TIM_SMCR_ETF_1                      ((uint32_t)0x0200)            /*!<Bit 1 */
+#define  TIM_SMCR_ETF_2                      ((uint32_t)0x0400)            /*!<Bit 2 */
+#define  TIM_SMCR_ETF_3                      ((uint32_t)0x0800)            /*!<Bit 3 */
+
+#define  TIM_SMCR_ETPS                       ((uint32_t)0x3000)            /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define  TIM_SMCR_ETPS_0                     ((uint32_t)0x1000)            /*!<Bit 0 */
+#define  TIM_SMCR_ETPS_1                     ((uint32_t)0x2000)            /*!<Bit 1 */
+
+
+#define  TIM_SMCR_ECE                        ((uint32_t)0x4000)            /*!<External clock enable     */
+#define  TIM_SMCR_ETP                        ((uint32_t)0x8000)            /*!<External trigger polarity */
+
+/*******************  Bit definition for TIM_DIER register  *******************/
+#define  TIM_DIER_UIE                        ((uint32_t)0x0001)            /*!<Update interrupt enable */
+#define  TIM_DIER_CC1IE                      ((uint32_t)0x0002)            /*!<Capture/Compare 1 interrupt enable   */
+#define  TIM_DIER_CC2IE                      ((uint32_t)0x0004)            /*!<Capture/Compare 2 interrupt enable   */
+#define  TIM_DIER_CC3IE                      ((uint32_t)0x0008)            /*!<Capture/Compare 3 interrupt enable   */
+#define  TIM_DIER_CC4IE                      ((uint32_t)0x0010)            /*!<Capture/Compare 4 interrupt enable   */
+#define  TIM_DIER_COMIE                      ((uint32_t)0x0020)            /*!<COM interrupt enable                 */
+#define  TIM_DIER_TIE                        ((uint32_t)0x0040)            /*!<Trigger interrupt enable             */
+#define  TIM_DIER_BIE                        ((uint32_t)0x0080)            /*!<Break interrupt enable               */
+#define  TIM_DIER_UDE                        ((uint32_t)0x0100)            /*!<Update DMA request enable            */
+#define  TIM_DIER_CC1DE                      ((uint32_t)0x0200)            /*!<Capture/Compare 1 DMA request enable */
+#define  TIM_DIER_CC2DE                      ((uint32_t)0x0400)            /*!<Capture/Compare 2 DMA request enable */
+#define  TIM_DIER_CC3DE                      ((uint32_t)0x0800)            /*!<Capture/Compare 3 DMA request enable */
+#define  TIM_DIER_CC4DE                      ((uint32_t)0x1000)            /*!<Capture/Compare 4 DMA request enable */
+#define  TIM_DIER_COMDE                      ((uint32_t)0x2000)            /*!<COM DMA request enable               */
+#define  TIM_DIER_TDE                        ((uint32_t)0x4000)            /*!<Trigger DMA request enable           */
+
+/********************  Bit definition for TIM_SR register  ********************/
+#define  TIM_SR_UIF                          ((uint32_t)0x0001)            /*!<Update interrupt Flag              */
+#define  TIM_SR_CC1IF                        ((uint32_t)0x0002)            /*!<Capture/Compare 1 interrupt Flag   */
+#define  TIM_SR_CC2IF                        ((uint32_t)0x0004)            /*!<Capture/Compare 2 interrupt Flag   */
+#define  TIM_SR_CC3IF                        ((uint32_t)0x0008)            /*!<Capture/Compare 3 interrupt Flag   */
+#define  TIM_SR_CC4IF                        ((uint32_t)0x0010)            /*!<Capture/Compare 4 interrupt Flag   */
+#define  TIM_SR_COMIF                        ((uint32_t)0x0020)            /*!<COM interrupt Flag                 */
+#define  TIM_SR_TIF                          ((uint32_t)0x0040)            /*!<Trigger interrupt Flag             */
+#define  TIM_SR_BIF                          ((uint32_t)0x0080)            /*!<Break interrupt Flag               */
+#define  TIM_SR_B2IF                         ((uint32_t)0x0100)            /*!<Break2 interrupt Flag               */
+#define  TIM_SR_CC1OF                        ((uint32_t)0x0200)            /*!<Capture/Compare 1 Overcapture Flag */
+#define  TIM_SR_CC2OF                        ((uint32_t)0x0400)            /*!<Capture/Compare 2 Overcapture Flag */
+#define  TIM_SR_CC3OF                        ((uint32_t)0x0800)            /*!<Capture/Compare 3 Overcapture Flag */
+#define  TIM_SR_CC4OF                        ((uint32_t)0x1000)            /*!<Capture/Compare 4 Overcapture Flag */
+
+/*******************  Bit definition for TIM_EGR register  ********************/
+#define  TIM_EGR_UG                          ((uint32_t)0x00000001)               /*!<Update Generation                         */
+#define  TIM_EGR_CC1G                        ((uint32_t)0x00000002)               /*!<Capture/Compare 1 Generation              */
+#define  TIM_EGR_CC2G                        ((uint32_t)0x00000004)               /*!<Capture/Compare 2 Generation              */
+#define  TIM_EGR_CC3G                        ((uint32_t)0x00000008)               /*!<Capture/Compare 3 Generation              */
+#define  TIM_EGR_CC4G                        ((uint32_t)0x00000010)               /*!<Capture/Compare 4 Generation              */
+#define  TIM_EGR_COMG                        ((uint32_t)0x00000020)               /*!<Capture/Compare Control Update Generation */
+#define  TIM_EGR_TG                          ((uint32_t)0x00000040)               /*!<Trigger Generation                        */
+#define  TIM_EGR_BG                          ((uint32_t)0x00000080)               /*!<Break Generation                          */
+#define  TIM_EGR_B2G                         ((uint32_t)0x00000100)              /*!<Break2 Generation                          */
+
+/******************  Bit definition for TIM_CCMR1 register  *******************/
+#define  TIM_CCMR1_CC1S                      ((uint32_t)0x00000003)            /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define  TIM_CCMR1_CC1S_0                    ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define  TIM_CCMR1_CC1S_1                    ((uint32_t)0x00000002)            /*!<Bit 1 */
+
+#define  TIM_CCMR1_OC1FE                     ((uint32_t)0x00000004)            /*!<Output Compare 1 Fast enable                 */
+#define  TIM_CCMR1_OC1PE                     ((uint32_t)0x00000008)            /*!<Output Compare 1 Preload enable              */
+
+#define  TIM_CCMR1_OC1M                      ((uint32_t)0x00010070)            /*!<OC1M[2:0] bits (Output Compare 1 Mode)       */
+#define  TIM_CCMR1_OC1M_0                    ((uint32_t)0x00000010)            /*!<Bit 0 */
+#define  TIM_CCMR1_OC1M_1                    ((uint32_t)0x00000020)            /*!<Bit 1 */
+#define  TIM_CCMR1_OC1M_2                    ((uint32_t)0x00000040)            /*!<Bit 2 */
+#define  TIM_CCMR1_OC1M_3                    ((uint32_t)0x00010000)            /*!<Bit 3 */
+
+#define  TIM_CCMR1_OC1CE                     ((uint32_t)0x00000080)            /*!<Output Compare 1Clear Enable                 */
+
+#define  TIM_CCMR1_CC2S                      ((uint32_t)0x00000300)            /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define  TIM_CCMR1_CC2S_0                    ((uint32_t)0x00000100)            /*!<Bit 0 */
+#define  TIM_CCMR1_CC2S_1                    ((uint32_t)0x00000200)            /*!<Bit 1 */
+
+#define  TIM_CCMR1_OC2FE                     ((uint32_t)0x00000400)            /*!<Output Compare 2 Fast enable                 */
+#define  TIM_CCMR1_OC2PE                     ((uint32_t)0x00000800)            /*!<Output Compare 2 Preload enable              */
+
+#define  TIM_CCMR1_OC2M                      ((uint32_t)0x01007000)            /*!<OC2M[2:0] bits (Output Compare 2 Mode)       */
+#define  TIM_CCMR1_OC2M_0                    ((uint32_t)0x00001000)            /*!<Bit 0 */
+#define  TIM_CCMR1_OC2M_1                    ((uint32_t)0x00002000)            /*!<Bit 1 */
+#define  TIM_CCMR1_OC2M_2                    ((uint32_t)0x00004000)            /*!<Bit 2 */
+#define  TIM_CCMR1_OC2M_3                    ((uint32_t)0x01000000)            /*!<Bit 3 */
+
+#define  TIM_CCMR1_OC2CE                     ((uint32_t)0x00008000)            /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define  TIM_CCMR1_IC1PSC                    ((uint32_t)0x000C)            /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define  TIM_CCMR1_IC1PSC_0                  ((uint32_t)0x0004)            /*!<Bit 0 */
+#define  TIM_CCMR1_IC1PSC_1                  ((uint32_t)0x0008)            /*!<Bit 1 */
+
+#define  TIM_CCMR1_IC1F                      ((uint32_t)0x00F0)            /*!<IC1F[3:0] bits (Input Capture 1 Filter)      */
+#define  TIM_CCMR1_IC1F_0                    ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_CCMR1_IC1F_1                    ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_CCMR1_IC1F_2                    ((uint32_t)0x0040)            /*!<Bit 2 */
+#define  TIM_CCMR1_IC1F_3                    ((uint32_t)0x0080)            /*!<Bit 3 */
+
+#define  TIM_CCMR1_IC2PSC                    ((uint32_t)0x0C00)            /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler)  */
+#define  TIM_CCMR1_IC2PSC_0                  ((uint32_t)0x0400)            /*!<Bit 0 */
+#define  TIM_CCMR1_IC2PSC_1                  ((uint32_t)0x0800)            /*!<Bit 1 */
+
+#define  TIM_CCMR1_IC2F                      ((uint32_t)0xF000)            /*!<IC2F[3:0] bits (Input Capture 2 Filter)       */
+#define  TIM_CCMR1_IC2F_0                    ((uint32_t)0x1000)            /*!<Bit 0 */
+#define  TIM_CCMR1_IC2F_1                    ((uint32_t)0x2000)            /*!<Bit 1 */
+#define  TIM_CCMR1_IC2F_2                    ((uint32_t)0x4000)            /*!<Bit 2 */
+#define  TIM_CCMR1_IC2F_3                    ((uint32_t)0x8000)            /*!<Bit 3 */
+
+/******************  Bit definition for TIM_CCMR2 register  *******************/
+#define  TIM_CCMR2_CC3S                      ((uint32_t)0x00000003)        /*!<CC3S[1:0] bits (Capture/Compare 3 Selection)  */
+#define  TIM_CCMR2_CC3S_0                    ((uint32_t)0x00000001)        /*!<Bit 0 */
+#define  TIM_CCMR2_CC3S_1                    ((uint32_t)0x00000002)        /*!<Bit 1 */
+
+#define  TIM_CCMR2_OC3FE                     ((uint32_t)0x00000004)        /*!<Output Compare 3 Fast enable           */
+#define  TIM_CCMR2_OC3PE                     ((uint32_t)0x00000008)        /*!<Output Compare 3 Preload enable        */
+
+#define  TIM_CCMR2_OC3M                      ((uint32_t)0x00010070)        /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define  TIM_CCMR2_OC3M_0                    ((uint32_t)0x00000010)        /*!<Bit 0 */
+#define  TIM_CCMR2_OC3M_1                    ((uint32_t)0x00000020)        /*!<Bit 1 */
+#define  TIM_CCMR2_OC3M_2                    ((uint32_t)0x00000040)        /*!<Bit 2 */
+#define  TIM_CCMR2_OC3M_3                    ((uint32_t)0x00010000)        /*!<Bit 3 */
+
+
+
+#define  TIM_CCMR2_OC3CE                     ((uint32_t)0x00000080)        /*!<Output Compare 3 Clear Enable */
+
+#define  TIM_CCMR2_CC4S                      ((uint32_t)0x00000300)        /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define  TIM_CCMR2_CC4S_0                    ((uint32_t)0x00000100)        /*!<Bit 0 */
+#define  TIM_CCMR2_CC4S_1                    ((uint32_t)0x00000200)        /*!<Bit 1 */
+
+#define  TIM_CCMR2_OC4FE                     ((uint32_t)0x00000400)        /*!<Output Compare 4 Fast enable    */
+#define  TIM_CCMR2_OC4PE                     ((uint32_t)0x00000800)        /*!<Output Compare 4 Preload enable */
+
+#define  TIM_CCMR2_OC4M                      ((uint32_t)0x01007000)        /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define  TIM_CCMR2_OC4M_0                    ((uint32_t)0x00001000)        /*!<Bit 0 */
+#define  TIM_CCMR2_OC4M_1                    ((uint32_t)0x00002000)        /*!<Bit 1 */
+#define  TIM_CCMR2_OC4M_2                    ((uint32_t)0x00004000)        /*!<Bit 2 */
+#define  TIM_CCMR2_OC4M_3                    ((uint32_t)0x01000000)        /*!<Bit 3 */
+
+#define  TIM_CCMR2_OC4CE                     ((uint32_t)0x8000)            /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define  TIM_CCMR2_IC3PSC                    ((uint32_t)0x000C)            /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define  TIM_CCMR2_IC3PSC_0                  ((uint32_t)0x0004)            /*!<Bit 0 */
+#define  TIM_CCMR2_IC3PSC_1                  ((uint32_t)0x0008)            /*!<Bit 1 */
+
+#define  TIM_CCMR2_IC3F                      ((uint32_t)0x00F0)            /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define  TIM_CCMR2_IC3F_0                    ((uint32_t)0x0010)            /*!<Bit 0 */
+#define  TIM_CCMR2_IC3F_1                    ((uint32_t)0x0020)            /*!<Bit 1 */
+#define  TIM_CCMR2_IC3F_2                    ((uint32_t)0x0040)            /*!<Bit 2 */
+#define  TIM_CCMR2_IC3F_3                    ((uint32_t)0x0080)            /*!<Bit 3 */
+
+#define  TIM_CCMR2_IC4PSC                    ((uint32_t)0x0C00)            /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define  TIM_CCMR2_IC4PSC_0                  ((uint32_t)0x0400)            /*!<Bit 0 */
+#define  TIM_CCMR2_IC4PSC_1                  ((uint32_t)0x0800)            /*!<Bit 1 */
+
+#define  TIM_CCMR2_IC4F                      ((uint32_t)0xF000)            /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define  TIM_CCMR2_IC4F_0                    ((uint32_t)0x1000)            /*!<Bit 0 */
+#define  TIM_CCMR2_IC4F_1                    ((uint32_t)0x2000)            /*!<Bit 1 */
+#define  TIM_CCMR2_IC4F_2                    ((uint32_t)0x4000)            /*!<Bit 2 */
+#define  TIM_CCMR2_IC4F_3                    ((uint32_t)0x8000)            /*!<Bit 3 */
+
+/*******************  Bit definition for TIM_CCER register  *******************/
+#define  TIM_CCER_CC1E                       ((uint32_t)0x00000001)            /*!<Capture/Compare 1 output enable */
+#define  TIM_CCER_CC1P                       ((uint32_t)0x00000002)            /*!<Capture/Compare 1 output Polarity */
+#define  TIM_CCER_CC1NE                      ((uint32_t)0x00000004)            /*!<Capture/Compare 1 Complementary output enable */
+#define  TIM_CCER_CC1NP                      ((uint32_t)0x00000008)            /*!<Capture/Compare 1 Complementary output Polarity */
+#define  TIM_CCER_CC2E                       ((uint32_t)0x00000010)            /*!<Capture/Compare 2 output enable */
+#define  TIM_CCER_CC2P                       ((uint32_t)0x00000020)            /*!<Capture/Compare 2 output Polarity */
+#define  TIM_CCER_CC2NE                      ((uint32_t)0x00000040)            /*!<Capture/Compare 2 Complementary output enable */
+#define  TIM_CCER_CC2NP                      ((uint32_t)0x00000080)            /*!<Capture/Compare 2 Complementary output Polarity */
+#define  TIM_CCER_CC3E                       ((uint32_t)0x00000100)            /*!<Capture/Compare 3 output enable */
+#define  TIM_CCER_CC3P                       ((uint32_t)0x00000200)            /*!<Capture/Compare 3 output Polarity */
+#define  TIM_CCER_CC3NE                      ((uint32_t)0x00000400)            /*!<Capture/Compare 3 Complementary output enable */
+#define  TIM_CCER_CC3NP                      ((uint32_t)0x00000800)            /*!<Capture/Compare 3 Complementary output Polarity */
+#define  TIM_CCER_CC4E                       ((uint32_t)0x00001000)            /*!<Capture/Compare 4 output enable */
+#define  TIM_CCER_CC4P                       ((uint32_t)0x00002000)            /*!<Capture/Compare 4 output Polarity */
+#define  TIM_CCER_CC4NP                      ((uint32_t)0x00008000)            /*!<Capture/Compare 4 Complementary output Polarity */
+#define  TIM_CCER_CC5E                       ((uint32_t)0x00010000)            /*!<Capture/Compare 5 output enable */
+#define  TIM_CCER_CC5P                       ((uint32_t)0x00020000)            /*!<Capture/Compare 5 output Polarity */
+#define  TIM_CCER_CC6E                       ((uint32_t)0x00100000)            /*!<Capture/Compare 6 output enable */
+#define  TIM_CCER_CC6P                       ((uint32_t)0x00200000)            /*!<Capture/Compare 6 output Polarity */
+
+
+/*******************  Bit definition for TIM_CNT register  ********************/
+#define  TIM_CNT_CNT                         ((uint32_t)0xFFFF)            /*!<Counter Value            */
+
+/*******************  Bit definition for TIM_PSC register  ********************/
+#define  TIM_PSC_PSC                         ((uint32_t)0xFFFF)            /*!<Prescaler Value          */
+
+/*******************  Bit definition for TIM_ARR register  ********************/
+#define  TIM_ARR_ARR                         ((uint32_t)0xFFFF)            /*!<actual auto-reload Value */
+
+/*******************  Bit definition for TIM_RCR register  ********************/
+#define  TIM_RCR_REP                         ((uint8_t)0xFF)               /*!<Repetition Counter Value */
+
+/*******************  Bit definition for TIM_CCR1 register  *******************/
+#define  TIM_CCR1_CCR1                       ((uint32_t)0xFFFF)            /*!<Capture/Compare 1 Value  */
+
+/*******************  Bit definition for TIM_CCR2 register  *******************/
+#define  TIM_CCR2_CCR2                       ((uint32_t)0xFFFF)            /*!<Capture/Compare 2 Value  */
+
+/*******************  Bit definition for TIM_CCR3 register  *******************/
+#define  TIM_CCR3_CCR3                       ((uint32_t)0xFFFF)            /*!<Capture/Compare 3 Value  */
+
+/*******************  Bit definition for TIM_CCR4 register  *******************/
+#define  TIM_CCR4_CCR4                       ((uint32_t)0xFFFF)            /*!<Capture/Compare 4 Value  */
+
+/*******************  Bit definition for TIM_BDTR register  *******************/
+#define  TIM_BDTR_DTG                        ((uint32_t)0x000000FF)            /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define  TIM_BDTR_DTG_0                      ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define  TIM_BDTR_DTG_1                      ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define  TIM_BDTR_DTG_2                      ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define  TIM_BDTR_DTG_3                      ((uint32_t)0x00000008)            /*!<Bit 3 */
+#define  TIM_BDTR_DTG_4                      ((uint32_t)0x00000010)            /*!<Bit 4 */
+#define  TIM_BDTR_DTG_5                      ((uint32_t)0x00000020)            /*!<Bit 5 */
+#define  TIM_BDTR_DTG_6                      ((uint32_t)0x00000040)            /*!<Bit 6 */
+#define  TIM_BDTR_DTG_7                      ((uint32_t)0x00000080)            /*!<Bit 7 */
+
+#define  TIM_BDTR_LOCK                       ((uint32_t)0x00000300)            /*!<LOCK[1:0] bits (Lock Configuration) */
+#define  TIM_BDTR_LOCK_0                     ((uint32_t)0x00000100)            /*!<Bit 0 */
+#define  TIM_BDTR_LOCK_1                     ((uint32_t)0x00000200)            /*!<Bit 1 */
+
+#define  TIM_BDTR_OSSI                       ((uint32_t)0x00000400)            /*!<Off-State Selection for Idle mode */
+#define  TIM_BDTR_OSSR                       ((uint32_t)0x00000800)            /*!<Off-State Selection for Run mode  */
+#define  TIM_BDTR_BKE                        ((uint32_t)0x00001000)            /*!<Break enable                      */
+#define  TIM_BDTR_BKP                        ((uint32_t)0x00002000)            /*!<Break Polarity                    */
+#define  TIM_BDTR_AOE                        ((uint32_t)0x00004000)            /*!<Automatic Output enable           */
+#define  TIM_BDTR_MOE                        ((uint32_t)0x00008000)            /*!<Main Output enable                */
+#define  TIM_BDTR_BKF                        ((uint32_t)0x000F0000)            /*!<Break Filter for Break1 */
+#define  TIM_BDTR_BK2F                       ((uint32_t)0x00F00000)            /*!<Break Filter for Break2 */
+#define  TIM_BDTR_BK2E                       ((uint32_t)0x01000000)            /*!<Break enable for Break2 */
+#define  TIM_BDTR_BK2P                       ((uint32_t)0x02000000)            /*!<Break Polarity for Break2 */
+
+/*******************  Bit definition for TIM_DCR register  ********************/
+#define  TIM_DCR_DBA                         ((uint32_t)0x001F)            /*!<DBA[4:0] bits (DMA Base Address) */
+#define  TIM_DCR_DBA_0                       ((uint32_t)0x0001)            /*!<Bit 0 */
+#define  TIM_DCR_DBA_1                       ((uint32_t)0x0002)            /*!<Bit 1 */
+#define  TIM_DCR_DBA_2                       ((uint32_t)0x0004)            /*!<Bit 2 */
+#define  TIM_DCR_DBA_3                       ((uint32_t)0x0008)            /*!<Bit 3 */
+#define  TIM_DCR_DBA_4                       ((uint32_t)0x0010)            /*!<Bit 4 */
+
+#define  TIM_DCR_DBL                         ((uint32_t)0x1F00)            /*!<DBL[4:0] bits (DMA Burst Length) */
+#define  TIM_DCR_DBL_0                       ((uint32_t)0x0100)            /*!<Bit 0 */
+#define  TIM_DCR_DBL_1                       ((uint32_t)0x0200)            /*!<Bit 1 */
+#define  TIM_DCR_DBL_2                       ((uint32_t)0x0400)            /*!<Bit 2 */
+#define  TIM_DCR_DBL_3                       ((uint32_t)0x0800)            /*!<Bit 3 */
+#define  TIM_DCR_DBL_4                       ((uint32_t)0x1000)            /*!<Bit 4 */
+
+/*******************  Bit definition for TIM_DMAR register  *******************/
+#define  TIM_DMAR_DMAB                       ((uint32_t)0xFFFF)            /*!<DMA register for burst accesses                    */
+
+/*******************  Bit definition for TIM_OR register  *********************/
+#define TIM_OR_TI4_RMP                       ((uint32_t)0x00C0)            /*!<TI4_RMP[1:0] bits (TIM5 Input 4 remap)             */
+#define TIM_OR_TI4_RMP_0                     ((uint32_t)0x0040)            /*!<Bit 0 */
+#define TIM_OR_TI4_RMP_1                     ((uint32_t)0x0080)            /*!<Bit 1 */
+#define TIM_OR_ITR1_RMP                      ((uint32_t)0x0C00)            /*!<ITR1_RMP[1:0] bits (TIM2 Internal trigger 1 remap) */
+#define TIM_OR_ITR1_RMP_0                    ((uint32_t)0x0400)            /*!<Bit 0 */
+#define TIM_OR_ITR1_RMP_1                    ((uint32_t)0x0800)            /*!<Bit 1 */
+
+/******************  Bit definition for TIM_CCMR3 register  *******************/
+#define  TIM_CCMR3_OC5FE                     ((uint32_t)0x00000004)            /*!<Output Compare 5 Fast enable */
+#define  TIM_CCMR3_OC5PE                     ((uint32_t)0x00000008)            /*!<Output Compare 5 Preload enable */
+
+#define  TIM_CCMR3_OC5M                      ((uint32_t)0x00010070)            /*!<OC5M[2:0] bits (Output Compare 5 Mode) */
+#define  TIM_CCMR3_OC5M_0                    ((uint32_t)0x00000010)            /*!<Bit 0 */
+#define  TIM_CCMR3_OC5M_1                    ((uint32_t)0x00000020)            /*!<Bit 1 */
+#define  TIM_CCMR3_OC5M_2                    ((uint32_t)0x00000040)            /*!<Bit 2 */
+#define  TIM_CCMR3_OC5M_3                    ((uint32_t)0x00010000)            /*!<Bit 3 */
+
+#define  TIM_CCMR3_OC5CE                     ((uint32_t)0x00000080)            /*!<Output Compare 5 Clear Enable */
+
+#define  TIM_CCMR3_OC6FE                     ((uint32_t)0x00000400)            /*!<Output Compare 4 Fast enable */
+#define  TIM_CCMR3_OC6PE                     ((uint32_t)0x00000800)            /*!<Output Compare 4 Preload enable */
+
+#define  TIM_CCMR3_OC6M                      ((uint32_t)0x01007000)            /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define  TIM_CCMR3_OC6M_0                    ((uint32_t)0x00001000)            /*!<Bit 0 */
+#define  TIM_CCMR3_OC6M_1                    ((uint32_t)0x00002000)            /*!<Bit 1 */
+#define  TIM_CCMR3_OC6M_2                    ((uint32_t)0x00004000)            /*!<Bit 2 */
+#define  TIM_CCMR3_OC6M_3                    ((uint32_t)0x01000000)            /*!<Bit 3 */
+
+#define  TIM_CCMR3_OC6CE                     ((uint32_t)0x00008000)            /*!<Output Compare 4 Clear Enable */
+
+/*******************  Bit definition for TIM_CCR5 register  *******************/
+#define  TIM_CCR5_CCR5                       ((uint32_t)0xFFFFFFFF)        /*!<Capture/Compare 5 Value */
+#define  TIM_CCR5_GC5C1                      ((uint32_t)0x20000000)        /*!<Group Channel 5 and Channel 1 */
+#define  TIM_CCR5_GC5C2                      ((uint32_t)0x40000000)        /*!<Group Channel 5 and Channel 2 */
+#define  TIM_CCR5_GC5C3                      ((uint32_t)0x80000000)        /*!<Group Channel 5 and Channel 3 */
+
+/*******************  Bit definition for TIM_CCR6 register  *******************/
+#define  TIM_CCR6_CCR6                       ((uint16_t)0xFFFF)            /*!<Capture/Compare 6 Value */
+
+
+/******************************************************************************/
+/*                                                                            */
+/*                         Low Power Timer (LPTIM)                            */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for LPTIM_ISR register  *******************/
+#define  LPTIM_ISR_CMPM                         ((uint32_t)0x00000001)            /*!< Compare match                       */
+#define  LPTIM_ISR_ARRM                         ((uint32_t)0x00000002)            /*!< Autoreload match                    */
+#define  LPTIM_ISR_EXTTRIG                      ((uint32_t)0x00000004)            /*!< External trigger edge event         */
+#define  LPTIM_ISR_CMPOK                        ((uint32_t)0x00000008)            /*!< Compare register update OK          */
+#define  LPTIM_ISR_ARROK                        ((uint32_t)0x00000010)            /*!< Autoreload register update OK       */
+#define  LPTIM_ISR_UP                           ((uint32_t)0x00000020)            /*!< Counter direction change down to up */
+#define  LPTIM_ISR_DOWN                         ((uint32_t)0x00000040)            /*!< Counter direction change up to down */
+
+/******************  Bit definition for LPTIM_ICR register  *******************/
+#define  LPTIM_ICR_CMPMCF                       ((uint32_t)0x00000001)            /*!< Compare match Clear Flag                       */
+#define  LPTIM_ICR_ARRMCF                       ((uint32_t)0x00000002)            /*!< Autoreload match Clear Flag                    */
+#define  LPTIM_ICR_EXTTRIGCF                    ((uint32_t)0x00000004)            /*!< External trigger edge event Clear Flag         */
+#define  LPTIM_ICR_CMPOKCF                      ((uint32_t)0x00000008)            /*!< Compare register update OK Clear Flag          */
+#define  LPTIM_ICR_ARROKCF                      ((uint32_t)0x00000010)            /*!< Autoreload register update OK Clear Flag       */
+#define  LPTIM_ICR_UPCF                         ((uint32_t)0x00000020)            /*!< Counter direction change down to up Clear Flag */
+#define  LPTIM_ICR_DOWNCF                       ((uint32_t)0x00000040)            /*!< Counter direction change up to down Clear Flag */
+
+/******************  Bit definition for LPTIM_IER register ********************/
+#define  LPTIM_IER_CMPMIE                       ((uint32_t)0x00000001)            /*!< Compare match Interrupt Enable                       */
+#define  LPTIM_IER_ARRMIE                       ((uint32_t)0x00000002)            /*!< Autoreload match Interrupt Enable                    */
+#define  LPTIM_IER_EXTTRIGIE                    ((uint32_t)0x00000004)            /*!< External trigger edge event Interrupt Enable         */
+#define  LPTIM_IER_CMPOKIE                      ((uint32_t)0x00000008)            /*!< Compare register update OK Interrupt Enable          */
+#define  LPTIM_IER_ARROKIE                      ((uint32_t)0x00000010)            /*!< Autoreload register update OK Interrupt Enable       */
+#define  LPTIM_IER_UPIE                         ((uint32_t)0x00000020)            /*!< Counter direction change down to up Interrupt Enable */
+#define  LPTIM_IER_DOWNIE                       ((uint32_t)0x00000040)            /*!< Counter direction change up to down Interrupt Enable */
+
+/******************  Bit definition for LPTIM_CFGR register *******************/
+#define  LPTIM_CFGR_CKSEL                       ((uint32_t)0x00000001)             /*!< Clock selector */
+
+#define  LPTIM_CFGR_CKPOL                       ((uint32_t)0x00000006)             /*!< CKPOL[1:0] bits (Clock polarity) */
+#define  LPTIM_CFGR_CKPOL_0                     ((uint32_t)0x00000002)             /*!< Bit 0 */
+#define  LPTIM_CFGR_CKPOL_1                     ((uint32_t)0x00000004)             /*!< Bit 1 */
+
+#define  LPTIM_CFGR_CKFLT                       ((uint32_t)0x00000018)             /*!< CKFLT[1:0] bits (Configurable digital filter for external clock) */
+#define  LPTIM_CFGR_CKFLT_0                     ((uint32_t)0x00000008)             /*!< Bit 0 */
+#define  LPTIM_CFGR_CKFLT_1                     ((uint32_t)0x00000010)             /*!< Bit 1 */
+
+#define  LPTIM_CFGR_TRGFLT                      ((uint32_t)0x000000C0)             /*!< TRGFLT[1:0] bits (Configurable digital filter for trigger) */
+#define  LPTIM_CFGR_TRGFLT_0                    ((uint32_t)0x00000040)             /*!< Bit 0 */
+#define  LPTIM_CFGR_TRGFLT_1                    ((uint32_t)0x00000080)             /*!< Bit 1 */
+
+#define  LPTIM_CFGR_PRESC                       ((uint32_t)0x00000E00)             /*!< PRESC[2:0] bits (Clock prescaler) */
+#define  LPTIM_CFGR_PRESC_0                     ((uint32_t)0x00000200)             /*!< Bit 0 */
+#define  LPTIM_CFGR_PRESC_1                     ((uint32_t)0x00000400)             /*!< Bit 1 */
+#define  LPTIM_CFGR_PRESC_2                     ((uint32_t)0x00000800)             /*!< Bit 2 */
+
+#define  LPTIM_CFGR_TRIGSEL                     ((uint32_t)0x0000E000)             /*!< TRIGSEL[2:0]] bits (Trigger selector) */
+#define  LPTIM_CFGR_TRIGSEL_0                   ((uint32_t)0x00002000)             /*!< Bit 0 */
+#define  LPTIM_CFGR_TRIGSEL_1                   ((uint32_t)0x00004000)             /*!< Bit 1 */
+#define  LPTIM_CFGR_TRIGSEL_2                   ((uint32_t)0x00008000)             /*!< Bit 2 */
+
+#define  LPTIM_CFGR_TRIGEN                      ((uint32_t)0x00060000)             /*!< TRIGEN[1:0] bits (Trigger enable and polarity) */
+#define  LPTIM_CFGR_TRIGEN_0                    ((uint32_t)0x00020000)             /*!< Bit 0 */
+#define  LPTIM_CFGR_TRIGEN_1                    ((uint32_t)0x00040000)             /*!< Bit 1 */
+
+#define  LPTIM_CFGR_TIMOUT                      ((uint32_t)0x00080000)             /*!< Timout enable           */
+#define  LPTIM_CFGR_WAVE                        ((uint32_t)0x00100000)             /*!< Waveform shape          */
+#define  LPTIM_CFGR_WAVPOL                      ((uint32_t)0x00200000)             /*!< Waveform shape polarity */
+#define  LPTIM_CFGR_PRELOAD                     ((uint32_t)0x00400000)             /*!< Reg update mode         */
+#define  LPTIM_CFGR_COUNTMODE                   ((uint32_t)0x00800000)             /*!< Counter mode enable     */     
+#define  LPTIM_CFGR_ENC                         ((uint32_t)0x01000000)             /*!< Encoder mode enable     */          
+
+/******************  Bit definition for LPTIM_CR register  ********************/
+#define  LPTIM_CR_ENABLE                        ((uint32_t)0x00000001)             /*!< LPTIMer enable                 */
+#define  LPTIM_CR_SNGSTRT                       ((uint32_t)0x00080002)             /*!< Timer start in single mode     */
+#define  LPTIM_CR_CNTSTRT                       ((uint32_t)0x00000004)             /*!< Timer start in continuous mode */
+
+/******************  Bit definition for LPTIM_CMP register  *******************/
+#define  LPTIM_CMP_CMP                          ((uint32_t)0x0000FFFF)             /*!< Compare register     */
+
+/******************  Bit definition for LPTIM_ARR register  *******************/
+#define  LPTIM_ARR_ARR                          ((uint32_t)0x0000FFFF)             /*!< Auto reload register */
+
+/******************  Bit definition for LPTIM_CNT register  *******************/
+#define  LPTIM_CNT_CNT                          ((uint32_t)0x0000FFFF)             /*!< Counter register     */
+/******************************************************************************/
+/*                                                                            */
+/*      Universal Synchronous Asynchronous Receiver Transmitter (USART)       */
+/*                                                                            */
+/******************************************************************************/
+/******************  Bit definition for USART_CR1 register  *******************/
+#define  USART_CR1_UE                        ((uint32_t)0x00000001)            /*!< USART Enable                                    */
+#define  USART_CR1_RE                        ((uint32_t)0x00000004)            /*!< Receiver Enable                                 */
+#define  USART_CR1_TE                        ((uint32_t)0x00000008)            /*!< Transmitter Enable                              */
+#define  USART_CR1_IDLEIE                    ((uint32_t)0x00000010)            /*!< IDLE Interrupt Enable                           */
+#define  USART_CR1_RXNEIE                    ((uint32_t)0x00000020)            /*!< RXNE Interrupt Enable                           */
+#define  USART_CR1_TCIE                      ((uint32_t)0x00000040)            /*!< Transmission Complete Interrupt Enable          */
+#define  USART_CR1_TXEIE                     ((uint32_t)0x00000080)            /*!< TXE Interrupt Enable                            */
+#define  USART_CR1_PEIE                      ((uint32_t)0x00000100)            /*!< PE Interrupt Enable                             */
+#define  USART_CR1_PS                        ((uint32_t)0x00000200)            /*!< Parity Selection                                */
+#define  USART_CR1_PCE                       ((uint32_t)0x00000400)            /*!< Parity Control Enable                           */
+#define  USART_CR1_WAKE                      ((uint32_t)0x00000800)            /*!< Receiver Wakeup method                          */
+#define  USART_CR1_M                         ((uint32_t)0x10001000)            /*!< Word length                                     */
+#define  USART_CR1_M_0                       ((uint32_t)0x00001000)            /*!< Word length - Bit 0                             */
+#define  USART_CR1_MME                       ((uint32_t)0x00002000)            /*!< Mute Mode Enable                                */
+#define  USART_CR1_CMIE                      ((uint32_t)0x00004000)            /*!< Character match interrupt enable                */
+#define  USART_CR1_OVER8                     ((uint32_t)0x00008000)            /*!< Oversampling by 8-bit or 16-bit mode            */
+#define  USART_CR1_DEDT                      ((uint32_t)0x001F0000)            /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define  USART_CR1_DEDT_0                    ((uint32_t)0x00010000)            /*!< Bit 0 */
+#define  USART_CR1_DEDT_1                    ((uint32_t)0x00020000)            /*!< Bit 1 */
+#define  USART_CR1_DEDT_2                    ((uint32_t)0x00040000)            /*!< Bit 2 */
+#define  USART_CR1_DEDT_3                    ((uint32_t)0x00080000)            /*!< Bit 3 */
+#define  USART_CR1_DEDT_4                    ((uint32_t)0x00100000)            /*!< Bit 4 */
+#define  USART_CR1_DEAT                      ((uint32_t)0x03E00000)            /*!< DEAT[4:0] bits (Driver Enable Assertion Time)   */
+#define  USART_CR1_DEAT_0                    ((uint32_t)0x00200000)            /*!< Bit 0 */
+#define  USART_CR1_DEAT_1                    ((uint32_t)0x00400000)            /*!< Bit 1 */
+#define  USART_CR1_DEAT_2                    ((uint32_t)0x00800000)            /*!< Bit 2 */
+#define  USART_CR1_DEAT_3                    ((uint32_t)0x01000000)            /*!< Bit 3 */
+#define  USART_CR1_DEAT_4                    ((uint32_t)0x02000000)            /*!< Bit 4 */
+#define  USART_CR1_RTOIE                     ((uint32_t)0x04000000)            /*!< Receive Time Out interrupt enable */
+#define  USART_CR1_EOBIE                     ((uint32_t)0x08000000)            /*!< End of Block interrupt enable     */
+#define  USART_CR1_M_1                       ((uint32_t)0x10000000)            /*!< Word length - Bit 1               */
+
+/******************  Bit definition for USART_CR2 register  *******************/
+#define  USART_CR2_ADDM7                     ((uint32_t)0x00000010)            /*!< 7-bit or 4-bit Address Detection       */
+#define  USART_CR2_LBDL                      ((uint32_t)0x00000020)            /*!< LIN Break Detection Length             */
+#define  USART_CR2_LBDIE                     ((uint32_t)0x00000040)            /*!< LIN Break Detection Interrupt Enable   */
+#define  USART_CR2_LBCL                      ((uint32_t)0x00000100)            /*!< Last Bit Clock pulse                   */
+#define  USART_CR2_CPHA                      ((uint32_t)0x00000200)            /*!< Clock Phase                            */
+#define  USART_CR2_CPOL                      ((uint32_t)0x00000400)            /*!< Clock Polarity                         */
+#define  USART_CR2_CLKEN                     ((uint32_t)0x00000800)            /*!< Clock Enable                           */
+#define  USART_CR2_STOP                      ((uint32_t)0x00003000)            /*!< STOP[1:0] bits (STOP bits)             */
+#define  USART_CR2_STOP_0                    ((uint32_t)0x00001000)            /*!< Bit 0 */
+#define  USART_CR2_STOP_1                    ((uint32_t)0x00002000)            /*!< Bit 1 */
+#define  USART_CR2_LINEN                     ((uint32_t)0x00004000)            /*!< LIN mode enable                        */
+#define  USART_CR2_SWAP                      ((uint32_t)0x00008000)            /*!< SWAP TX/RX pins                        */
+#define  USART_CR2_RXINV                     ((uint32_t)0x00010000)            /*!< RX pin active level inversion          */
+#define  USART_CR2_TXINV                     ((uint32_t)0x00020000)            /*!< TX pin active level inversion          */
+#define  USART_CR2_DATAINV                   ((uint32_t)0x00040000)            /*!< Binary data inversion                  */
+#define  USART_CR2_MSBFIRST                  ((uint32_t)0x00080000)            /*!< Most Significant Bit First             */
+#define  USART_CR2_ABREN                     ((uint32_t)0x00100000)            /*!< Auto Baud-Rate Enable                  */
+#define  USART_CR2_ABRMODE                   ((uint32_t)0x00600000)            /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define  USART_CR2_ABRMODE_0                 ((uint32_t)0x00200000)            /*!< Bit 0 */
+#define  USART_CR2_ABRMODE_1                 ((uint32_t)0x00400000)            /*!< Bit 1 */
+#define  USART_CR2_RTOEN                     ((uint32_t)0x00800000)            /*!< Receiver Time-Out enable  */
+#define  USART_CR2_ADD                       ((uint32_t)0xFF000000)            /*!< Address of the USART node */
+
+/******************  Bit definition for USART_CR3 register  *******************/
+#define  USART_CR3_EIE                       ((uint32_t)0x00000001)            /*!< Error Interrupt Enable                         */
+#define  USART_CR3_IREN                      ((uint32_t)0x00000002)            /*!< IrDA mode Enable                               */
+#define  USART_CR3_IRLP                      ((uint32_t)0x00000004)            /*!< IrDA Low-Power                                 */
+#define  USART_CR3_HDSEL                     ((uint32_t)0x00000008)            /*!< Half-Duplex Selection                          */
+#define  USART_CR3_NACK                      ((uint32_t)0x00000010)            /*!< SmartCard NACK enable                          */
+#define  USART_CR3_SCEN                      ((uint32_t)0x00000020)            /*!< SmartCard mode enable                          */
+#define  USART_CR3_DMAR                      ((uint32_t)0x00000040)            /*!< DMA Enable Receiver                            */
+#define  USART_CR3_DMAT                      ((uint32_t)0x00000080)            /*!< DMA Enable Transmitter                         */
+#define  USART_CR3_RTSE                      ((uint32_t)0x00000100)            /*!< RTS Enable                                     */
+#define  USART_CR3_CTSE                      ((uint32_t)0x00000200)            /*!< CTS Enable                                     */
+#define  USART_CR3_CTSIE                     ((uint32_t)0x00000400)            /*!< CTS Interrupt Enable                           */
+#define  USART_CR3_ONEBIT                    ((uint32_t)0x00000800)            /*!< One sample bit method enable                   */
+#define  USART_CR3_OVRDIS                    ((uint32_t)0x00001000)            /*!< Overrun Disable                                */
+#define  USART_CR3_DDRE                      ((uint32_t)0x00002000)            /*!< DMA Disable on Reception Error                 */
+#define  USART_CR3_DEM                       ((uint32_t)0x00004000)            /*!< Driver Enable Mode                             */
+#define  USART_CR3_DEP                       ((uint32_t)0x00008000)            /*!< Driver Enable Polarity Selection               */
+#define  USART_CR3_SCARCNT                   ((uint32_t)0x000E0000)            /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define  USART_CR3_SCARCNT_0                 ((uint32_t)0x00020000)            /*!< Bit 0 */
+#define  USART_CR3_SCARCNT_1                 ((uint32_t)0x00040000)            /*!< Bit 1 */
+#define  USART_CR3_SCARCNT_2                 ((uint32_t)0x00080000)            /*!< Bit 2 */
+
+
+/******************  Bit definition for USART_BRR register  *******************/
+#define  USART_BRR_DIV_FRACTION              ((uint32_t)0x000F)                /*!< Fraction of USARTDIV */
+#define  USART_BRR_DIV_MANTISSA              ((uint32_t)0xFFF0)                /*!< Mantissa of USARTDIV */
+
+/******************  Bit definition for USART_GTPR register  ******************/
+#define  USART_GTPR_PSC                      ((uint32_t)0x00FF)                /*!< PSC[7:0] bits (Prescaler value) */
+#define  USART_GTPR_GT                       ((uint32_t)0xFF00)                /*!< GT[7:0] bits (Guard time value) */
+
+
+/*******************  Bit definition for USART_RTOR register  *****************/
+#define  USART_RTOR_RTO                      ((uint32_t)0x00FFFFFF)            /*!< Receiver Time Out Value */
+#define  USART_RTOR_BLEN                     ((uint32_t)0xFF000000)            /*!< Block Length */
+
+/*******************  Bit definition for USART_RQR register  ******************/
+#define  USART_RQR_ABRRQ                     ((uint32_t)0x0001)                /*!< Auto-Baud Rate Request      */
+#define  USART_RQR_SBKRQ                     ((uint32_t)0x0002)                /*!< Send Break Request          */
+#define  USART_RQR_MMRQ                      ((uint32_t)0x0004)                /*!< Mute Mode Request           */
+#define  USART_RQR_RXFRQ                     ((uint32_t)0x0008)                /*!< Receive Data flush Request  */
+#define  USART_RQR_TXFRQ                     ((uint32_t)0x0010)                /*!< Transmit data flush Request */
+
+/*******************  Bit definition for USART_ISR register  ******************/
+#define  USART_ISR_PE                        ((uint32_t)0x00000001)            /*!< Parity Error                        */
+#define  USART_ISR_FE                        ((uint32_t)0x00000002)            /*!< Framing Error                       */
+#define  USART_ISR_NE                        ((uint32_t)0x00000004)            /*!< Noise detected Flag                 */
+#define  USART_ISR_ORE                       ((uint32_t)0x00000008)            /*!< OverRun Error                       */
+#define  USART_ISR_IDLE                      ((uint32_t)0x00000010)            /*!< IDLE line detected                  */
+#define  USART_ISR_RXNE                      ((uint32_t)0x00000020)            /*!< Read Data Register Not Empty        */
+#define  USART_ISR_TC                        ((uint32_t)0x00000040)            /*!< Transmission Complete               */
+#define  USART_ISR_TXE                       ((uint32_t)0x00000080)            /*!< Transmit Data Register Empty        */
+#define  USART_ISR_LBD                       ((uint32_t)0x00000100)            /*!< LIN Break Detection Flag            */
+#define  USART_ISR_CTSIF                     ((uint32_t)0x00000200)            /*!< CTS interrupt flag                  */
+#define  USART_ISR_CTS                       ((uint32_t)0x00000400)            /*!< CTS flag                            */
+#define  USART_ISR_RTOF                      ((uint32_t)0x00000800)            /*!< Receiver Time Out                   */
+#define  USART_ISR_EOBF                      ((uint32_t)0x00001000)            /*!< End Of Block Flag                   */
+#define  USART_ISR_ABRE                      ((uint32_t)0x00004000)            /*!< Auto-Baud Rate Error                */
+#define  USART_ISR_ABRF                      ((uint32_t)0x00008000)            /*!< Auto-Baud Rate Flag                 */
+#define  USART_ISR_BUSY                      ((uint32_t)0x00010000)            /*!< Busy Flag                           */
+#define  USART_ISR_CMF                       ((uint32_t)0x00020000)            /*!< Character Match Flag                */
+#define  USART_ISR_SBKF                      ((uint32_t)0x00040000)            /*!< Send Break Flag                     */
+#define  USART_ISR_RWU                       ((uint32_t)0x00080000)            /*!< Receive Wake Up from mute mode Flag */
+#define  USART_ISR_WUF                       ((uint32_t)0x00100000)            /*!< Wake Up from stop mode Flag         */
+#define  USART_ISR_TEACK                     ((uint32_t)0x00200000)            /*!< Transmit Enable Acknowledge Flag    */
+#define  USART_ISR_REACK                     ((uint32_t)0x00400000)            /*!< Receive Enable Acknowledge Flag     */
+
+/*******************  Bit definition for USART_ICR register  ******************/
+#define  USART_ICR_PECF                      ((uint32_t)0x00000001)            /*!< Parity Error Clear Flag             */
+#define  USART_ICR_FECF                      ((uint32_t)0x00000002)            /*!< Framing Error Clear Flag            */
+#define  USART_ICR_NCF                       ((uint32_t)0x00000004)            /*!< Noise detected Clear Flag           */
+#define  USART_ICR_ORECF                     ((uint32_t)0x00000008)            /*!< OverRun Error Clear Flag            */
+#define  USART_ICR_IDLECF                    ((uint32_t)0x00000010)            /*!< IDLE line detected Clear Flag       */
+#define  USART_ICR_TCCF                      ((uint32_t)0x00000040)            /*!< Transmission Complete Clear Flag    */
+#define  USART_ICR_LBDCF                     ((uint32_t)0x00000100)            /*!< LIN Break Detection Clear Flag      */
+#define  USART_ICR_CTSCF                     ((uint32_t)0x00000200)            /*!< CTS Interrupt Clear Flag            */
+#define  USART_ICR_RTOCF                     ((uint32_t)0x00000800)            /*!< Receiver Time Out Clear Flag        */
+#define  USART_ICR_EOBCF                     ((uint32_t)0x00001000)            /*!< End Of Block Clear Flag             */
+#define  USART_ICR_CMCF                      ((uint32_t)0x00020000)            /*!< Character Match Clear Flag          */
+#define  USART_ICR_WUCF                      ((uint32_t)0x00100000)            /*!< Wake Up from stop mode Clear Flag   */
+
+/*******************  Bit definition for USART_RDR register  ******************/
+#define  USART_RDR_RDR                       ((uint32_t)0x01FF)                /*!< RDR[8:0] bits (Receive Data value) */
+
+/*******************  Bit definition for USART_TDR register  ******************/
+#define  USART_TDR_TDR                       ((uint32_t)0x01FF)                /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/*                                                                            */
+/*                            Window WATCHDOG                                 */
+/*                                                                            */
+/******************************************************************************/
+/*******************  Bit definition for WWDG_CR register  ********************/
+#define  WWDG_CR_T                            ((uint32_t)0x7F)                 /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define  WWDG_CR_T_0                          ((uint32_t)0x01)                 /*!<Bit 0 */
+#define  WWDG_CR_T_1                          ((uint32_t)0x02)                 /*!<Bit 1 */
+#define  WWDG_CR_T_2                          ((uint32_t)0x04)                 /*!<Bit 2 */
+#define  WWDG_CR_T_3                          ((uint32_t)0x08)                 /*!<Bit 3 */
+#define  WWDG_CR_T_4                          ((uint32_t)0x10)                 /*!<Bit 4 */
+#define  WWDG_CR_T_5                          ((uint32_t)0x20)                 /*!<Bit 5 */
+#define  WWDG_CR_T_6                          ((uint32_t)0x40)                 /*!<Bit 6 */
+
+/* Legacy defines */
+#define  WWDG_CR_T0                           WWDG_CR_T_0                      /*!<Bit 0 */
+#define  WWDG_CR_T1                           WWDG_CR_T_1                      /*!<Bit 1 */
+#define  WWDG_CR_T2                           WWDG_CR_T_2                      /*!<Bit 2 */
+#define  WWDG_CR_T3                           WWDG_CR_T_3                      /*!<Bit 3 */
+#define  WWDG_CR_T4                           WWDG_CR_T_4                      /*!<Bit 4 */
+#define  WWDG_CR_T5                           WWDG_CR_T_5                      /*!<Bit 5 */
+#define  WWDG_CR_T6                           WWDG_CR_T_6                      /*!<Bit 6 */
+
+#define  WWDG_CR_WDGA                        ((uint32_t)0x80)                  /*!<Activation bit */
+
+/*******************  Bit definition for WWDG_CFR register  *******************/
+#define  WWDG_CFR_W                          ((uint32_t)0x007F)                /*!<W[6:0] bits (7-bit window value) */
+#define  WWDG_CFR_W_0                        ((uint32_t)0x0001)                /*!<Bit 0 */
+#define  WWDG_CFR_W_1                        ((uint32_t)0x0002)                /*!<Bit 1 */
+#define  WWDG_CFR_W_2                        ((uint32_t)0x0004)                /*!<Bit 2 */
+#define  WWDG_CFR_W_3                        ((uint32_t)0x0008)                /*!<Bit 3 */
+#define  WWDG_CFR_W_4                        ((uint32_t)0x0010)                /*!<Bit 4 */
+#define  WWDG_CFR_W_5                        ((uint32_t)0x0020)                /*!<Bit 5 */
+#define  WWDG_CFR_W_6                        ((uint32_t)0x0040)                /*!<Bit 6 */
+
+/* Legacy defines */
+#define  WWDG_CFR_W0                         WWDG_CFR_W_0                      /*!<Bit 0 */
+#define  WWDG_CFR_W1                         WWDG_CFR_W_1                      /*!<Bit 1 */
+#define  WWDG_CFR_W2                         WWDG_CFR_W_2                      /*!<Bit 2 */
+#define  WWDG_CFR_W3                         WWDG_CFR_W_3                      /*!<Bit 3 */
+#define  WWDG_CFR_W4                         WWDG_CFR_W_4                      /*!<Bit 4 */
+#define  WWDG_CFR_W5                         WWDG_CFR_W_5                      /*!<Bit 5 */
+#define  WWDG_CFR_W6                         WWDG_CFR_W_6                      /*!<Bit 6 */
+
+#define  WWDG_CFR_WDGTB                      ((uint32_t)0x0180)                /*!<WDGTB[1:0] bits (Timer Base) */
+#define  WWDG_CFR_WDGTB_0                    ((uint32_t)0x0080)                /*!<Bit 0 */
+#define  WWDG_CFR_WDGTB_1                    ((uint32_t)0x0100)                /*!<Bit 1 */
+
+/* Legacy defines */
+#define  WWDG_CFR_WDGTB0                     WWDG_CFR_WDGTB_0                  /*!<Bit 0 */
+#define  WWDG_CFR_WDGTB1                     WWDG_CFR_WDGTB_1                  /*!<Bit 1 */
+
+#define  WWDG_CFR_EWI                        ((uint32_t)0x0200)               /*!<Early Wakeup Interrupt */
+
+/*******************  Bit definition for WWDG_SR register  ********************/
+#define  WWDG_SR_EWIF                        ((uint32_t)0x01)                  /*!<Early Wakeup Interrupt Flag */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                DBG                                         */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for DBGMCU_IDCODE register  *************/
+#define  DBGMCU_IDCODE_DEV_ID                ((uint32_t)0x00000FFF)
+#define  DBGMCU_IDCODE_REV_ID                ((uint32_t)0xFFFF0000)
+
+/********************  Bit definition for DBGMCU_CR register  *****************/
+#define  DBGMCU_CR_DBG_SLEEP                 ((uint32_t)0x00000001)
+#define  DBGMCU_CR_DBG_STOP                  ((uint32_t)0x00000002)
+#define  DBGMCU_CR_DBG_STANDBY               ((uint32_t)0x00000004)
+#define  DBGMCU_CR_TRACE_IOEN                ((uint32_t)0x00000020)
+
+#define  DBGMCU_CR_TRACE_MODE                ((uint32_t)0x000000C0)
+#define  DBGMCU_CR_TRACE_MODE_0              ((uint32_t)0x00000040) /*!<Bit 0 */
+#define  DBGMCU_CR_TRACE_MODE_1              ((uint32_t)0x00000080) /*!<Bit 1 */
+
+/********************  Bit definition for DBGMCU_APB1_FZ register  ************/
+#define  DBGMCU_APB1_FZ_DBG_TIM2_STOP            ((uint32_t)0x00000001)
+#define  DBGMCU_APB1_FZ_DBG_TIM3_STOP            ((uint32_t)0x00000002)
+#define  DBGMCU_APB1_FZ_DBG_TIM4_STOP            ((uint32_t)0x00000004)
+#define  DBGMCU_APB1_FZ_DBG_TIM5_STOP            ((uint32_t)0x00000008)
+#define  DBGMCU_APB1_FZ_DBG_TIM6_STOP            ((uint32_t)0x00000010)
+#define  DBGMCU_APB1_FZ_DBG_TIM7_STOP            ((uint32_t)0x00000020)
+#define  DBGMCU_APB1_FZ_DBG_TIM12_STOP           ((uint32_t)0x00000040)
+#define  DBGMCU_APB1_FZ_DBG_TIM13_STOP           ((uint32_t)0x00000080)
+#define  DBGMCU_APB1_FZ_DBG_TIM14_STOP           ((uint32_t)0x00000100)
+#define  DBGMCU_APB1_FZ_DBG_RTC_STOP             ((uint32_t)0x00000400)
+#define  DBGMCU_APB1_FZ_DBG_WWDG_STOP            ((uint32_t)0x00000800)
+#define  DBGMCU_APB1_FZ_DBG_IWDG_STOP            ((uint32_t)0x00001000)
+#define  DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT   ((uint32_t)0x00200000)
+#define  DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT   ((uint32_t)0x00400000)
+#define  DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT   ((uint32_t)0x00800000)
+#define  DBGMCU_APB1_FZ_DBG_CAN1_STOP            ((uint32_t)0x02000000)
+#define  DBGMCU_APB1_FZ_DBG_CAN2_STOP            ((uint32_t)0x04000000)
+
+/********************  Bit definition for DBGMCU_APB2_FZ register  ************/
+#define  DBGMCU_APB1_FZ_DBG_TIM1_STOP        ((uint32_t)0x00000001)
+#define  DBGMCU_APB1_FZ_DBG_TIM8_STOP        ((uint32_t)0x00000002)
+#define  DBGMCU_APB1_FZ_DBG_TIM9_STOP        ((uint32_t)0x00010000)
+#define  DBGMCU_APB1_FZ_DBG_TIM10_STOP       ((uint32_t)0x00020000)
+#define  DBGMCU_APB1_FZ_DBG_TIM11_STOP       ((uint32_t)0x00040000)
+
+/******************************************************************************/
+/*                                                                            */
+/*                Ethernet MAC Registers bits definitions                     */
+/*                                                                            */
+/******************************************************************************/
+/* Bit definition for Ethernet MAC Control Register register */
+#define ETH_MACCR_WD      ((uint32_t)0x00800000)  /* Watchdog disable */
+#define ETH_MACCR_JD      ((uint32_t)0x00400000)  /* Jabber disable */
+#define ETH_MACCR_IFG     ((uint32_t)0x000E0000)  /* Inter-frame gap */
+#define ETH_MACCR_IFG_96Bit     ((uint32_t)0x00000000)  /* Minimum IFG between frames during transmission is 96Bit */
+  #define ETH_MACCR_IFG_88Bit     ((uint32_t)0x00020000)  /* Minimum IFG between frames during transmission is 88Bit */
+  #define ETH_MACCR_IFG_80Bit     ((uint32_t)0x00040000)  /* Minimum IFG between frames during transmission is 80Bit */
+  #define ETH_MACCR_IFG_72Bit     ((uint32_t)0x00060000)  /* Minimum IFG between frames during transmission is 72Bit */
+  #define ETH_MACCR_IFG_64Bit     ((uint32_t)0x00080000)  /* Minimum IFG between frames during transmission is 64Bit */        
+  #define ETH_MACCR_IFG_56Bit     ((uint32_t)0x000A0000)  /* Minimum IFG between frames during transmission is 56Bit */
+  #define ETH_MACCR_IFG_48Bit     ((uint32_t)0x000C0000)  /* Minimum IFG between frames during transmission is 48Bit */
+  #define ETH_MACCR_IFG_40Bit     ((uint32_t)0x000E0000)  /* Minimum IFG between frames during transmission is 40Bit */              
+#define ETH_MACCR_CSD     ((uint32_t)0x00010000)  /* Carrier sense disable (during transmission) */
+#define ETH_MACCR_FES     ((uint32_t)0x00004000)  /* Fast ethernet speed */
+#define ETH_MACCR_ROD     ((uint32_t)0x00002000)  /* Receive own disable */
+#define ETH_MACCR_LM      ((uint32_t)0x00001000)  /* loopback mode */
+#define ETH_MACCR_DM      ((uint32_t)0x00000800)  /* Duplex mode */
+#define ETH_MACCR_IPCO    ((uint32_t)0x00000400)  /* IP Checksum offload */
+#define ETH_MACCR_RD      ((uint32_t)0x00000200)  /* Retry disable */
+#define ETH_MACCR_APCS    ((uint32_t)0x00000080)  /* Automatic Pad/CRC stripping */
+#define ETH_MACCR_BL      ((uint32_t)0x00000060)  /* Back-off limit: random integer number (r) of slot time delays before rescheduling
+                                                       a transmission attempt during retries after a collision: 0 =< r <2^k */
+  #define ETH_MACCR_BL_10    ((uint32_t)0x00000000)  /* k = min (n, 10) */
+  #define ETH_MACCR_BL_8     ((uint32_t)0x00000020)  /* k = min (n, 8) */
+  #define ETH_MACCR_BL_4     ((uint32_t)0x00000040)  /* k = min (n, 4) */
+  #define ETH_MACCR_BL_1     ((uint32_t)0x00000060)  /* k = min (n, 1) */ 
+#define ETH_MACCR_DC      ((uint32_t)0x00000010)  /* Defferal check */
+#define ETH_MACCR_TE      ((uint32_t)0x00000008)  /* Transmitter enable */
+#define ETH_MACCR_RE      ((uint32_t)0x00000004)  /* Receiver enable */
+
+/* Bit definition for Ethernet MAC Frame Filter Register */
+#define ETH_MACFFR_RA     ((uint32_t)0x80000000)  /* Receive all */ 
+#define ETH_MACFFR_HPF    ((uint32_t)0x00000400)  /* Hash or perfect filter */ 
+#define ETH_MACFFR_SAF    ((uint32_t)0x00000200)  /* Source address filter enable */ 
+#define ETH_MACFFR_SAIF   ((uint32_t)0x00000100)  /* SA inverse filtering */ 
+#define ETH_MACFFR_PCF    ((uint32_t)0x000000C0)  /* Pass control frames: 3 cases */
+  #define ETH_MACFFR_PCF_BlockAll                ((uint32_t)0x00000040)  /* MAC filters all control frames from reaching the application */
+  #define ETH_MACFFR_PCF_ForwardAll              ((uint32_t)0x00000080)  /* MAC forwards all control frames to application even if they fail the Address Filter */
+  #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0)  /* MAC forwards control frames that pass the Address Filter. */ 
+#define ETH_MACFFR_BFD    ((uint32_t)0x00000020)  /* Broadcast frame disable */ 
+#define ETH_MACFFR_PAM    ((uint32_t)0x00000010)  /* Pass all mutlicast */ 
+#define ETH_MACFFR_DAIF   ((uint32_t)0x00000008)  /* DA Inverse filtering */ 
+#define ETH_MACFFR_HM     ((uint32_t)0x00000004)  /* Hash multicast */ 
+#define ETH_MACFFR_HU     ((uint32_t)0x00000002)  /* Hash unicast */
+#define ETH_MACFFR_PM     ((uint32_t)0x00000001)  /* Promiscuous mode */
+
+/* Bit definition for Ethernet MAC Hash Table High Register */
+#define ETH_MACHTHR_HTH   ((uint32_t)0xFFFFFFFF)  /* Hash table high */
+
+/* Bit definition for Ethernet MAC Hash Table Low Register */
+#define ETH_MACHTLR_HTL   ((uint32_t)0xFFFFFFFF)  /* Hash table low */
+
+/* Bit definition for Ethernet MAC MII Address Register */
+#define ETH_MACMIIAR_PA   ((uint32_t)0x0000F800)  /* Physical layer address */ 
+#define ETH_MACMIIAR_MR   ((uint32_t)0x000007C0)  /* MII register in the selected PHY */ 
+#define ETH_MACMIIAR_CR   ((uint32_t)0x0000001C)  /* CR clock range: 6 cases */ 
+  #define ETH_MACMIIAR_CR_Div42   ((uint32_t)0x00000000)  /* HCLK:60-100 MHz; MDC clock= HCLK/42 */
+  #define ETH_MACMIIAR_CR_Div62   ((uint32_t)0x00000004)  /* HCLK:100-150 MHz; MDC clock= HCLK/62 */
+  #define ETH_MACMIIAR_CR_Div16   ((uint32_t)0x00000008)  /* HCLK:20-35 MHz; MDC clock= HCLK/16 */
+  #define ETH_MACMIIAR_CR_Div26   ((uint32_t)0x0000000C)  /* HCLK:35-60 MHz; MDC clock= HCLK/26 */
+  #define ETH_MACMIIAR_CR_Div102  ((uint32_t)0x00000010)  /* HCLK:150-168 MHz; MDC clock= HCLK/102 */  
+#define ETH_MACMIIAR_MW   ((uint32_t)0x00000002)  /* MII write */ 
+#define ETH_MACMIIAR_MB   ((uint32_t)0x00000001)  /* MII busy */ 
+  
+/* Bit definition for Ethernet MAC MII Data Register */
+#define ETH_MACMIIDR_MD   ((uint32_t)0x0000FFFF)  /* MII data: read/write data from/to PHY */
+
+/* Bit definition for Ethernet MAC Flow Control Register */
+#define ETH_MACFCR_PT     ((uint32_t)0xFFFF0000)  /* Pause time */
+#define ETH_MACFCR_ZQPD   ((uint32_t)0x00000080)  /* Zero-quanta pause disable */
+#define ETH_MACFCR_PLT    ((uint32_t)0x00000030)  /* Pause low threshold: 4 cases */
+  #define ETH_MACFCR_PLT_Minus4   ((uint32_t)0x00000000)  /* Pause time minus 4 slot times */
+  #define ETH_MACFCR_PLT_Minus28  ((uint32_t)0x00000010)  /* Pause time minus 28 slot times */
+  #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020)  /* Pause time minus 144 slot times */
+  #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030)  /* Pause time minus 256 slot times */      
+#define ETH_MACFCR_UPFD   ((uint32_t)0x00000008)  /* Unicast pause frame detect */
+#define ETH_MACFCR_RFCE   ((uint32_t)0x00000004)  /* Receive flow control enable */
+#define ETH_MACFCR_TFCE   ((uint32_t)0x00000002)  /* Transmit flow control enable */
+#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001)  /* Flow control busy/backpressure activate */
+
+/* Bit definition for Ethernet MAC VLAN Tag Register */
+#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000)  /* 12-bit VLAN tag comparison */
+#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF)  /* VLAN tag identifier (for receive frames) */
+
+/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */ 
+#define ETH_MACRWUFFR_D   ((uint32_t)0xFFFFFFFF)  /* Wake-up frame filter register data */
+/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers.
+   Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */
+/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask
+   Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask
+   Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask
+   Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask
+   Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command - 
+                              RSVD - Filter1 Command - RSVD - Filter0 Command
+   Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset
+   Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16
+   Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */
+
+/* Bit definition for Ethernet MAC PMT Control and Status Register */ 
+#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000)  /* Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_MACPMTCSR_GU     ((uint32_t)0x00000200)  /* Global Unicast */
+#define ETH_MACPMTCSR_WFR    ((uint32_t)0x00000040)  /* Wake-Up Frame Received */
+#define ETH_MACPMTCSR_MPR    ((uint32_t)0x00000020)  /* Magic Packet Received */
+#define ETH_MACPMTCSR_WFE    ((uint32_t)0x00000004)  /* Wake-Up Frame Enable */
+#define ETH_MACPMTCSR_MPE    ((uint32_t)0x00000002)  /* Magic Packet Enable */
+#define ETH_MACPMTCSR_PD     ((uint32_t)0x00000001)  /* Power Down */
+
+/* Bit definition for Ethernet MAC Status Register */
+#define ETH_MACSR_TSTS      ((uint32_t)0x00000200)  /* Time stamp trigger status */
+#define ETH_MACSR_MMCTS     ((uint32_t)0x00000040)  /* MMC transmit status */
+#define ETH_MACSR_MMMCRS    ((uint32_t)0x00000020)  /* MMC receive status */
+#define ETH_MACSR_MMCS      ((uint32_t)0x00000010)  /* MMC status */
+#define ETH_MACSR_PMTS      ((uint32_t)0x00000008)  /* PMT status */
+
+/* Bit definition for Ethernet MAC Interrupt Mask Register */
+#define ETH_MACIMR_TSTIM     ((uint32_t)0x00000200)  /* Time stamp trigger interrupt mask */
+#define ETH_MACIMR_PMTIM     ((uint32_t)0x00000008)  /* PMT interrupt mask */
+
+/* Bit definition for Ethernet MAC Address0 High Register */
+#define ETH_MACA0HR_MACA0H   ((uint32_t)0x0000FFFF)  /* MAC address0 high */
+
+/* Bit definition for Ethernet MAC Address0 Low Register */
+#define ETH_MACA0LR_MACA0L   ((uint32_t)0xFFFFFFFF)  /* MAC address0 low */
+
+/* Bit definition for Ethernet MAC Address1 High Register */
+#define ETH_MACA1HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA1HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA1HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control: bits to mask for comparison of the MAC Address bytes */
+  #define ETH_MACA1HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA1HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA1HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA1HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA1HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA1HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [7:0] */ 
+#define ETH_MACA1HR_MACA1H   ((uint32_t)0x0000FFFF)  /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address1 Low Register */
+#define ETH_MACA1LR_MACA1L   ((uint32_t)0xFFFFFFFF)  /* MAC address1 low */
+
+/* Bit definition for Ethernet MAC Address2 High Register */
+#define ETH_MACA2HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA2HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA2HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control */
+  #define ETH_MACA2HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA2HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA2HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA2HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA2HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA2HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA2HR_MACA2H   ((uint32_t)0x0000FFFF)  /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address2 Low Register */
+#define ETH_MACA2LR_MACA2L   ((uint32_t)0xFFFFFFFF)  /* MAC address2 low */
+
+/* Bit definition for Ethernet MAC Address3 High Register */
+#define ETH_MACA3HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA3HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA3HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control */
+  #define ETH_MACA3HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA3HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA3HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA3HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA3HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA3HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA3HR_MACA3H   ((uint32_t)0x0000FFFF)  /* MAC address3 high */
+
+/* Bit definition for Ethernet MAC Address3 Low Register */
+#define ETH_MACA3LR_MACA3L   ((uint32_t)0xFFFFFFFF)  /* MAC address3 low */
+
+/******************************************************************************/
+/*                Ethernet MMC Registers bits definition                      */
+/******************************************************************************/
+
+/* Bit definition for Ethernet MMC Contol Register */
+#define ETH_MMCCR_MCFHP      ((uint32_t)0x00000020)  /* MMC counter Full-Half preset */
+#define ETH_MMCCR_MCP        ((uint32_t)0x00000010)  /* MMC counter preset */
+#define ETH_MMCCR_MCF        ((uint32_t)0x00000008)  /* MMC Counter Freeze */
+#define ETH_MMCCR_ROR        ((uint32_t)0x00000004)  /* Reset on Read */
+#define ETH_MMCCR_CSR        ((uint32_t)0x00000002)  /* Counter Stop Rollover */
+#define ETH_MMCCR_CR         ((uint32_t)0x00000001)  /* Counters Reset */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Register */
+#define ETH_MMCRIR_RGUFS     ((uint32_t)0x00020000)  /* Set when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIR_RFAES     ((uint32_t)0x00000040)  /* Set when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIR_RFCES     ((uint32_t)0x00000020)  /* Set when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Register */
+#define ETH_MMCTIR_TGFS      ((uint32_t)0x00200000)  /* Set when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFMSCS   ((uint32_t)0x00008000)  /* Set when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFSCS    ((uint32_t)0x00004000)  /* Set when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */
+#define ETH_MMCRIMR_RGUFM    ((uint32_t)0x00020000)  /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFAEM    ((uint32_t)0x00000040)  /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFCEM    ((uint32_t)0x00000020)  /* Mask the interrupt when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */
+#define ETH_MMCTIMR_TGFM     ((uint32_t)0x00200000)  /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFMSCM  ((uint32_t)0x00008000)  /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFSCM   ((uint32_t)0x00004000)  /* Mask the interrupt when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */
+#define ETH_MMCTGFSCCR_TGFSCC     ((uint32_t)0xFFFFFFFF)  /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */
+#define ETH_MMCTGFMSCCR_TGFMSCC   ((uint32_t)0xFFFFFFFF)  /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */
+#define ETH_MMCTGFCR_TGFC    ((uint32_t)0xFFFFFFFF)  /* Number of good frames transmitted. */
+
+/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */
+#define ETH_MMCRFCECR_RFCEC  ((uint32_t)0xFFFFFFFF)  /* Number of frames received with CRC error. */
+
+/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */
+#define ETH_MMCRFAECR_RFAEC  ((uint32_t)0xFFFFFFFF)  /* Number of frames received with alignment (dribble) error */
+
+/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */
+#define ETH_MMCRGUFCR_RGUFC  ((uint32_t)0xFFFFFFFF)  /* Number of good unicast frames received. */
+
+/******************************************************************************/
+/*               Ethernet PTP Registers bits definition                       */
+/******************************************************************************/
+
+/* Bit definition for Ethernet PTP Time Stamp Contol Register */
+#define ETH_PTPTSCR_TSCNT       ((uint32_t)0x00030000)  /* Time stamp clock node type */
+#define ETH_PTPTSSR_TSSMRME     ((uint32_t)0x00008000)  /* Time stamp snapshot for message relevant to master enable */
+#define ETH_PTPTSSR_TSSEME      ((uint32_t)0x00004000)  /* Time stamp snapshot for event message enable */
+#define ETH_PTPTSSR_TSSIPV4FE   ((uint32_t)0x00002000)  /* Time stamp snapshot for IPv4 frames enable */
+#define ETH_PTPTSSR_TSSIPV6FE   ((uint32_t)0x00001000)  /* Time stamp snapshot for IPv6 frames enable */
+#define ETH_PTPTSSR_TSSPTPOEFE  ((uint32_t)0x00000800)  /* Time stamp snapshot for PTP over ethernet frames enable */
+#define ETH_PTPTSSR_TSPTPPSV2E  ((uint32_t)0x00000400)  /* Time stamp PTP packet snooping for version2 format enable */
+#define ETH_PTPTSSR_TSSSR       ((uint32_t)0x00000200)  /* Time stamp Sub-seconds rollover */
+#define ETH_PTPTSSR_TSSARFE     ((uint32_t)0x00000100)  /* Time stamp snapshot for all received frames enable */
+
+#define ETH_PTPTSCR_TSARU    ((uint32_t)0x00000020)  /* Addend register update */
+#define ETH_PTPTSCR_TSITE    ((uint32_t)0x00000010)  /* Time stamp interrupt trigger enable */
+#define ETH_PTPTSCR_TSSTU    ((uint32_t)0x00000008)  /* Time stamp update */
+#define ETH_PTPTSCR_TSSTI    ((uint32_t)0x00000004)  /* Time stamp initialize */
+#define ETH_PTPTSCR_TSFCU    ((uint32_t)0x00000002)  /* Time stamp fine or coarse update */
+#define ETH_PTPTSCR_TSE      ((uint32_t)0x00000001)  /* Time stamp enable */
+
+/* Bit definition for Ethernet PTP Sub-Second Increment Register */
+#define ETH_PTPSSIR_STSSI    ((uint32_t)0x000000FF)  /* System time Sub-second increment value */
+
+/* Bit definition for Ethernet PTP Time Stamp High Register */
+#define ETH_PTPTSHR_STS      ((uint32_t)0xFFFFFFFF)  /* System Time second */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Register */
+#define ETH_PTPTSLR_STPNS    ((uint32_t)0x80000000)  /* System Time Positive or negative time */
+#define ETH_PTPTSLR_STSS     ((uint32_t)0x7FFFFFFF)  /* System Time sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp High Update Register */
+#define ETH_PTPTSHUR_TSUS    ((uint32_t)0xFFFFFFFF)  /* Time stamp update seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Update Register */
+#define ETH_PTPTSLUR_TSUPNS  ((uint32_t)0x80000000)  /* Time stamp update Positive or negative time */
+#define ETH_PTPTSLUR_TSUSS   ((uint32_t)0x7FFFFFFF)  /* Time stamp update sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Addend Register */
+#define ETH_PTPTSAR_TSA      ((uint32_t)0xFFFFFFFF)  /* Time stamp addend */
+
+/* Bit definition for Ethernet PTP Target Time High Register */
+#define ETH_PTPTTHR_TTSH     ((uint32_t)0xFFFFFFFF)  /* Target time stamp high */
+
+/* Bit definition for Ethernet PTP Target Time Low Register */
+#define ETH_PTPTTLR_TTSL     ((uint32_t)0xFFFFFFFF)  /* Target time stamp low */
+
+/* Bit definition for Ethernet PTP Time Stamp Status Register */
+#define ETH_PTPTSSR_TSTTR    ((uint32_t)0x00000020)  /* Time stamp target time reached */
+#define ETH_PTPTSSR_TSSO     ((uint32_t)0x00000010)  /* Time stamp seconds overflow */
+
+/******************************************************************************/
+/*                 Ethernet DMA Registers bits definition                     */
+/******************************************************************************/
+
+/* Bit definition for Ethernet DMA Bus Mode Register */
+#define ETH_DMABMR_AAB       ((uint32_t)0x02000000)  /* Address-Aligned beats */
+#define ETH_DMABMR_FPM        ((uint32_t)0x01000000)  /* 4xPBL mode */
+#define ETH_DMABMR_USP       ((uint32_t)0x00800000)  /* Use separate PBL */
+#define ETH_DMABMR_RDP       ((uint32_t)0x007E0000)  /* RxDMA PBL */
+  #define ETH_DMABMR_RDP_1Beat    ((uint32_t)0x00020000)  /* maximum number of beats to be transferred in one RxDMA transaction is 1 */
+  #define ETH_DMABMR_RDP_2Beat    ((uint32_t)0x00040000)  /* maximum number of beats to be transferred in one RxDMA transaction is 2 */
+  #define ETH_DMABMR_RDP_4Beat    ((uint32_t)0x00080000)  /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+  #define ETH_DMABMR_RDP_8Beat    ((uint32_t)0x00100000)  /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+  #define ETH_DMABMR_RDP_16Beat   ((uint32_t)0x00200000)  /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+  #define ETH_DMABMR_RDP_32Beat   ((uint32_t)0x00400000)  /* maximum number of beats to be transferred in one RxDMA transaction is 32 */                
+  #define ETH_DMABMR_RDP_4xPBL_4Beat   ((uint32_t)0x01020000)  /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+  #define ETH_DMABMR_RDP_4xPBL_8Beat   ((uint32_t)0x01040000)  /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+  #define ETH_DMABMR_RDP_4xPBL_16Beat  ((uint32_t)0x01080000)  /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+  #define ETH_DMABMR_RDP_4xPBL_32Beat  ((uint32_t)0x01100000)  /* maximum number of beats to be transferred in one RxDMA transaction is 32 */
+  #define ETH_DMABMR_RDP_4xPBL_64Beat  ((uint32_t)0x01200000)  /* maximum number of beats to be transferred in one RxDMA transaction is 64 */
+  #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000)  /* maximum number of beats to be transferred in one RxDMA transaction is 128 */  
+#define ETH_DMABMR_FB        ((uint32_t)0x00010000)  /* Fixed Burst */
+#define ETH_DMABMR_RTPR      ((uint32_t)0x0000C000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_1_1     ((uint32_t)0x00000000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_2_1     ((uint32_t)0x00004000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_3_1     ((uint32_t)0x00008000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_4_1     ((uint32_t)0x0000C000)  /* Rx Tx priority ratio */  
+#define ETH_DMABMR_PBL    ((uint32_t)0x00003F00)  /* Programmable burst length */
+  #define ETH_DMABMR_PBL_1Beat    ((uint32_t)0x00000100)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+  #define ETH_DMABMR_PBL_2Beat    ((uint32_t)0x00000200)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+  #define ETH_DMABMR_PBL_4Beat    ((uint32_t)0x00000400)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+  #define ETH_DMABMR_PBL_8Beat    ((uint32_t)0x00000800)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+  #define ETH_DMABMR_PBL_16Beat   ((uint32_t)0x00001000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+  #define ETH_DMABMR_PBL_32Beat   ((uint32_t)0x00002000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */                
+  #define ETH_DMABMR_PBL_4xPBL_4Beat   ((uint32_t)0x01000100)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+  #define ETH_DMABMR_PBL_4xPBL_8Beat   ((uint32_t)0x01000200)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+  #define ETH_DMABMR_PBL_4xPBL_16Beat  ((uint32_t)0x01000400)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+  #define ETH_DMABMR_PBL_4xPBL_32Beat  ((uint32_t)0x01000800)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+  #define ETH_DMABMR_PBL_4xPBL_64Beat  ((uint32_t)0x01001000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+  #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+#define ETH_DMABMR_EDE       ((uint32_t)0x00000080)  /* Enhanced Descriptor Enable */
+#define ETH_DMABMR_DSL       ((uint32_t)0x0000007C)  /* Descriptor Skip Length */
+#define ETH_DMABMR_DA        ((uint32_t)0x00000002)  /* DMA arbitration scheme */
+#define ETH_DMABMR_SR        ((uint32_t)0x00000001)  /* Software reset */
+
+/* Bit definition for Ethernet DMA Transmit Poll Demand Register */
+#define ETH_DMATPDR_TPD      ((uint32_t)0xFFFFFFFF)  /* Transmit poll demand */
+
+/* Bit definition for Ethernet DMA Receive Poll Demand Register */
+#define ETH_DMARPDR_RPD      ((uint32_t)0xFFFFFFFF)  /* Receive poll demand  */
+
+/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */
+#define ETH_DMARDLAR_SRL     ((uint32_t)0xFFFFFFFF)  /* Start of receive list */
+
+/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */
+#define ETH_DMATDLAR_STL     ((uint32_t)0xFFFFFFFF)  /* Start of transmit list */
+
+/* Bit definition for Ethernet DMA Status Register */
+#define ETH_DMASR_TSTS       ((uint32_t)0x20000000)  /* Time-stamp trigger status */
+#define ETH_DMASR_PMTS       ((uint32_t)0x10000000)  /* PMT status */
+#define ETH_DMASR_MMCS       ((uint32_t)0x08000000)  /* MMC status */
+#define ETH_DMASR_EBS        ((uint32_t)0x03800000)  /* Error bits status */
+  /* combination with EBS[2:0] for GetFlagStatus function */
+  #define ETH_DMASR_EBS_DescAccess      ((uint32_t)0x02000000)  /* Error bits 0-data buffer, 1-desc. access */
+  #define ETH_DMASR_EBS_ReadTransf      ((uint32_t)0x01000000)  /* Error bits 0-write trnsf, 1-read transfr */
+  #define ETH_DMASR_EBS_DataTransfTx    ((uint32_t)0x00800000)  /* Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMASR_TPS         ((uint32_t)0x00700000)  /* Transmit process state */
+  #define ETH_DMASR_TPS_Stopped         ((uint32_t)0x00000000)  /* Stopped - Reset or Stop Tx Command issued  */
+  #define ETH_DMASR_TPS_Fetching        ((uint32_t)0x00100000)  /* Running - fetching the Tx descriptor */
+  #define ETH_DMASR_TPS_Waiting         ((uint32_t)0x00200000)  /* Running - waiting for status */
+  #define ETH_DMASR_TPS_Reading         ((uint32_t)0x00300000)  /* Running - reading the data from host memory */
+  #define ETH_DMASR_TPS_Suspended       ((uint32_t)0x00600000)  /* Suspended - Tx Descriptor unavailabe */
+  #define ETH_DMASR_TPS_Closing         ((uint32_t)0x00700000)  /* Running - closing Rx descriptor */
+#define ETH_DMASR_RPS         ((uint32_t)0x000E0000)  /* Receive process state */
+  #define ETH_DMASR_RPS_Stopped         ((uint32_t)0x00000000)  /* Stopped - Reset or Stop Rx Command issued */
+  #define ETH_DMASR_RPS_Fetching        ((uint32_t)0x00020000)  /* Running - fetching the Rx descriptor */
+  #define ETH_DMASR_RPS_Waiting         ((uint32_t)0x00060000)  /* Running - waiting for packet */
+  #define ETH_DMASR_RPS_Suspended       ((uint32_t)0x00080000)  /* Suspended - Rx Descriptor unavailable */
+  #define ETH_DMASR_RPS_Closing         ((uint32_t)0x000A0000)  /* Running - closing descriptor */
+  #define ETH_DMASR_RPS_Queuing         ((uint32_t)0x000E0000)  /* Running - queuing the recieve frame into host memory */
+#define ETH_DMASR_NIS        ((uint32_t)0x00010000)  /* Normal interrupt summary */
+#define ETH_DMASR_AIS        ((uint32_t)0x00008000)  /* Abnormal interrupt summary */
+#define ETH_DMASR_ERS        ((uint32_t)0x00004000)  /* Early receive status */
+#define ETH_DMASR_FBES       ((uint32_t)0x00002000)  /* Fatal bus error status */
+#define ETH_DMASR_ETS        ((uint32_t)0x00000400)  /* Early transmit status */
+#define ETH_DMASR_RWTS       ((uint32_t)0x00000200)  /* Receive watchdog timeout status */
+#define ETH_DMASR_RPSS       ((uint32_t)0x00000100)  /* Receive process stopped status */
+#define ETH_DMASR_RBUS       ((uint32_t)0x00000080)  /* Receive buffer unavailable status */
+#define ETH_DMASR_RS         ((uint32_t)0x00000040)  /* Receive status */
+#define ETH_DMASR_TUS        ((uint32_t)0x00000020)  /* Transmit underflow status */
+#define ETH_DMASR_ROS        ((uint32_t)0x00000010)  /* Receive overflow status */
+#define ETH_DMASR_TJTS       ((uint32_t)0x00000008)  /* Transmit jabber timeout status */
+#define ETH_DMASR_TBUS       ((uint32_t)0x00000004)  /* Transmit buffer unavailable status */
+#define ETH_DMASR_TPSS       ((uint32_t)0x00000002)  /* Transmit process stopped status */
+#define ETH_DMASR_TS         ((uint32_t)0x00000001)  /* Transmit status */
+
+/* Bit definition for Ethernet DMA Operation Mode Register */
+#define ETH_DMAOMR_DTCEFD    ((uint32_t)0x04000000)  /* Disable Dropping of TCP/IP checksum error frames */
+#define ETH_DMAOMR_RSF       ((uint32_t)0x02000000)  /* Receive store and forward */
+#define ETH_DMAOMR_DFRF      ((uint32_t)0x01000000)  /* Disable flushing of received frames */
+#define ETH_DMAOMR_TSF       ((uint32_t)0x00200000)  /* Transmit store and forward */
+#define ETH_DMAOMR_FTF       ((uint32_t)0x00100000)  /* Flush transmit FIFO */
+#define ETH_DMAOMR_TTC       ((uint32_t)0x0001C000)  /* Transmit threshold control */
+  #define ETH_DMAOMR_TTC_64Bytes       ((uint32_t)0x00000000)  /* threshold level of the MTL Transmit FIFO is 64 Bytes */
+  #define ETH_DMAOMR_TTC_128Bytes      ((uint32_t)0x00004000)  /* threshold level of the MTL Transmit FIFO is 128 Bytes */
+  #define ETH_DMAOMR_TTC_192Bytes      ((uint32_t)0x00008000)  /* threshold level of the MTL Transmit FIFO is 192 Bytes */
+  #define ETH_DMAOMR_TTC_256Bytes      ((uint32_t)0x0000C000)  /* threshold level of the MTL Transmit FIFO is 256 Bytes */
+  #define ETH_DMAOMR_TTC_40Bytes       ((uint32_t)0x00010000)  /* threshold level of the MTL Transmit FIFO is 40 Bytes */
+  #define ETH_DMAOMR_TTC_32Bytes       ((uint32_t)0x00014000)  /* threshold level of the MTL Transmit FIFO is 32 Bytes */
+  #define ETH_DMAOMR_TTC_24Bytes       ((uint32_t)0x00018000)  /* threshold level of the MTL Transmit FIFO is 24 Bytes */
+  #define ETH_DMAOMR_TTC_16Bytes       ((uint32_t)0x0001C000)  /* threshold level of the MTL Transmit FIFO is 16 Bytes */
+#define ETH_DMAOMR_ST        ((uint32_t)0x00002000)  /* Start/stop transmission command */
+#define ETH_DMAOMR_FEF       ((uint32_t)0x00000080)  /* Forward error frames */
+#define ETH_DMAOMR_FUGF      ((uint32_t)0x00000040)  /* Forward undersized good frames */
+#define ETH_DMAOMR_RTC       ((uint32_t)0x00000018)  /* receive threshold control */
+  #define ETH_DMAOMR_RTC_64Bytes       ((uint32_t)0x00000000)  /* threshold level of the MTL Receive FIFO is 64 Bytes */
+  #define ETH_DMAOMR_RTC_32Bytes       ((uint32_t)0x00000008)  /* threshold level of the MTL Receive FIFO is 32 Bytes */
+  #define ETH_DMAOMR_RTC_96Bytes       ((uint32_t)0x00000010)  /* threshold level of the MTL Receive FIFO is 96 Bytes */
+  #define ETH_DMAOMR_RTC_128Bytes      ((uint32_t)0x00000018)  /* threshold level of the MTL Receive FIFO is 128 Bytes */
+#define ETH_DMAOMR_OSF       ((uint32_t)0x00000004)  /* operate on second frame */
+#define ETH_DMAOMR_SR        ((uint32_t)0x00000002)  /* Start/stop receive */
+
+/* Bit definition for Ethernet DMA Interrupt Enable Register */
+#define ETH_DMAIER_NISE      ((uint32_t)0x00010000)  /* Normal interrupt summary enable */
+#define ETH_DMAIER_AISE      ((uint32_t)0x00008000)  /* Abnormal interrupt summary enable */
+#define ETH_DMAIER_ERIE      ((uint32_t)0x00004000)  /* Early receive interrupt enable */
+#define ETH_DMAIER_FBEIE     ((uint32_t)0x00002000)  /* Fatal bus error interrupt enable */
+#define ETH_DMAIER_ETIE      ((uint32_t)0x00000400)  /* Early transmit interrupt enable */
+#define ETH_DMAIER_RWTIE     ((uint32_t)0x00000200)  /* Receive watchdog timeout interrupt enable */
+#define ETH_DMAIER_RPSIE     ((uint32_t)0x00000100)  /* Receive process stopped interrupt enable */
+#define ETH_DMAIER_RBUIE     ((uint32_t)0x00000080)  /* Receive buffer unavailable interrupt enable */
+#define ETH_DMAIER_RIE       ((uint32_t)0x00000040)  /* Receive interrupt enable */
+#define ETH_DMAIER_TUIE      ((uint32_t)0x00000020)  /* Transmit Underflow interrupt enable */
+#define ETH_DMAIER_ROIE      ((uint32_t)0x00000010)  /* Receive Overflow interrupt enable */
+#define ETH_DMAIER_TJTIE     ((uint32_t)0x00000008)  /* Transmit jabber timeout interrupt enable */
+#define ETH_DMAIER_TBUIE     ((uint32_t)0x00000004)  /* Transmit buffer unavailable interrupt enable */
+#define ETH_DMAIER_TPSIE     ((uint32_t)0x00000002)  /* Transmit process stopped interrupt enable */
+#define ETH_DMAIER_TIE       ((uint32_t)0x00000001)  /* Transmit interrupt enable */
+
+/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */
+#define ETH_DMAMFBOCR_OFOC   ((uint32_t)0x10000000)  /* Overflow bit for FIFO overflow counter */
+#define ETH_DMAMFBOCR_MFA    ((uint32_t)0x0FFE0000)  /* Number of frames missed by the application */
+#define ETH_DMAMFBOCR_OMFC   ((uint32_t)0x00010000)  /* Overflow bit for missed frame counter */
+#define ETH_DMAMFBOCR_MFC    ((uint32_t)0x0000FFFF)  /* Number of frames missed by the controller */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */
+#define ETH_DMACHTDR_HTDAP   ((uint32_t)0xFFFFFFFF)  /* Host transmit descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */
+#define ETH_DMACHRDR_HRDAP   ((uint32_t)0xFFFFFFFF)  /* Host receive descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */
+#define ETH_DMACHTBAR_HTBAP  ((uint32_t)0xFFFFFFFF)  /* Host transmit buffer address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */
+#define ETH_DMACHRBAR_HRBAP  ((uint32_t)0xFFFFFFFF)  /* Host receive buffer address pointer */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                       USB_OTG                              */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for USB_OTG_GOTGCTL register  ********************/
+#define USB_OTG_GOTGCTL_SRQSCS                  ((uint32_t)0x00000001)         /*!< Session request success */
+#define USB_OTG_GOTGCTL_SRQ                     ((uint32_t)0x00000002)         /*!< Session request */
+#define USB_OTG_GOTGCTL_VBVALOEN                ((uint32_t)0x00000004)         /*!< VBUS valid override enable */
+#define USB_OTG_GOTGCTL_VBVALOVAL               ((uint32_t)0x00000008)         /*!< VBUS valid override value */
+#define USB_OTG_GOTGCTL_AVALOEN                 ((uint32_t)0x00000010)         /*!< A-peripheral session valid override enable */
+#define USB_OTG_GOTGCTL_AVALOVAL                ((uint32_t)0x00000020)         /*!< A-peripheral session valid override value */
+#define USB_OTG_GOTGCTL_BVALOEN                 ((uint32_t)0x00000040)         /*!< B-peripheral session valid override enable */
+#define USB_OTG_GOTGCTL_BVALOVAL                ((uint32_t)0x00000080)         /*!< B-peripheral session valid override value  */
+#define USB_OTG_GOTGCTL_HNGSCS                  ((uint32_t)0x00000100)         /*!< Host set HNP enable */
+#define USB_OTG_GOTGCTL_HNPRQ                   ((uint32_t)0x00000200)         /*!< HNP request */
+#define USB_OTG_GOTGCTL_HSHNPEN                 ((uint32_t)0x00000400)         /*!< Host set HNP enable */
+#define USB_OTG_GOTGCTL_DHNPEN                  ((uint32_t)0x00000800)         /*!< Device HNP enabled */
+#define USB_OTG_GOTGCTL_EHEN                    ((uint32_t)0x00001000)         /*!< Embedded host enable */
+#define USB_OTG_GOTGCTL_CIDSTS                  ((uint32_t)0x00010000)         /*!< Connector ID status */
+#define USB_OTG_GOTGCTL_DBCT                    ((uint32_t)0x00020000)         /*!< Long/short debounce time */
+#define USB_OTG_GOTGCTL_ASVLD                   ((uint32_t)0x00040000)         /*!< A-session valid  */
+#define USB_OTG_GOTGCTL_BSESVLD                 ((uint32_t)0x00080000)         /*!< B-session valid */
+#define USB_OTG_GOTGCTL_OTGVER                  ((uint32_t)0x00100000)         /*!< OTG version  */
+
+/********************  Bit definition for USB_OTG_HCFG register  ********************/
+#define USB_OTG_HCFG_FSLSPCS                 ((uint32_t)0x00000003)            /*!< FS/LS PHY clock select  */
+#define USB_OTG_HCFG_FSLSPCS_0               ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_HCFG_FSLSPCS_1               ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_HCFG_FSLSS                   ((uint32_t)0x00000004)            /*!< FS- and LS-only support */
+
+/********************  Bit definition for USB_OTG_DCFG register  ********************/
+#define USB_OTG_DCFG_DSPD                    ((uint32_t)0x00000003)            /*!< Device speed */
+#define USB_OTG_DCFG_DSPD_0                  ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_DCFG_DSPD_1                  ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_DCFG_NZLSOHSK                ((uint32_t)0x00000004)            /*!< Nonzero-length status OUT handshake */
+
+#define USB_OTG_DCFG_DAD                     ((uint32_t)0x000007F0)            /*!< Device address */
+#define USB_OTG_DCFG_DAD_0                   ((uint32_t)0x00000010)            /*!<Bit 0 */
+#define USB_OTG_DCFG_DAD_1                   ((uint32_t)0x00000020)            /*!<Bit 1 */
+#define USB_OTG_DCFG_DAD_2                   ((uint32_t)0x00000040)            /*!<Bit 2 */
+#define USB_OTG_DCFG_DAD_3                   ((uint32_t)0x00000080)            /*!<Bit 3 */
+#define USB_OTG_DCFG_DAD_4                   ((uint32_t)0x00000100)            /*!<Bit 4 */
+#define USB_OTG_DCFG_DAD_5                   ((uint32_t)0x00000200)            /*!<Bit 5 */
+#define USB_OTG_DCFG_DAD_6                   ((uint32_t)0x00000400)            /*!<Bit 6 */
+
+#define USB_OTG_DCFG_PFIVL                   ((uint32_t)0x00001800)            /*!< Periodic (micro)frame interval */
+#define USB_OTG_DCFG_PFIVL_0                 ((uint32_t)0x00000800)            /*!<Bit 0 */
+#define USB_OTG_DCFG_PFIVL_1                 ((uint32_t)0x00001000)            /*!<Bit 1 */
+
+#define USB_OTG_DCFG_PERSCHIVL               ((uint32_t)0x03000000)            /*!< Periodic scheduling interval */
+#define USB_OTG_DCFG_PERSCHIVL_0             ((uint32_t)0x01000000)            /*!<Bit 0 */
+#define USB_OTG_DCFG_PERSCHIVL_1             ((uint32_t)0x02000000)            /*!<Bit 1 */
+
+/********************  Bit definition for USB_OTG_PCGCR register  ********************/
+#define USB_OTG_PCGCR_STPPCLK                 ((uint32_t)0x00000001)            /*!< Stop PHY clock */
+#define USB_OTG_PCGCR_GATEHCLK                ((uint32_t)0x00000002)            /*!< Gate HCLK */
+#define USB_OTG_PCGCR_PHYSUSP                 ((uint32_t)0x00000010)            /*!< PHY suspended */
+
+/********************  Bit definition for USB_OTG_GOTGINT register  ********************/
+#define USB_OTG_GOTGINT_SEDET                   ((uint32_t)0x00000004)            /*!< Session end detected                   */
+#define USB_OTG_GOTGINT_SRSSCHG                 ((uint32_t)0x00000100)            /*!< Session request success status change  */
+#define USB_OTG_GOTGINT_HNSSCHG                 ((uint32_t)0x00000200)            /*!< Host negotiation success status change */
+#define USB_OTG_GOTGINT_HNGDET                  ((uint32_t)0x00020000)            /*!< Host negotiation detected              */
+#define USB_OTG_GOTGINT_ADTOCHG                 ((uint32_t)0x00040000)            /*!< A-device timeout change                */
+#define USB_OTG_GOTGINT_DBCDNE                  ((uint32_t)0x00080000)            /*!< Debounce done                          */
+#define USB_OTG_GOTGINT_IDCHNG                  ((uint32_t)0x00100000)            /*!< Change in ID pin input value           */
+
+/********************  Bit definition for USB_OTG_DCTL register  ********************/
+#define USB_OTG_DCTL_RWUSIG                  ((uint32_t)0x00000001)            /*!< Remote wakeup signaling */
+#define USB_OTG_DCTL_SDIS                    ((uint32_t)0x00000002)            /*!< Soft disconnect         */
+#define USB_OTG_DCTL_GINSTS                  ((uint32_t)0x00000004)            /*!< Global IN NAK status    */
+#define USB_OTG_DCTL_GONSTS                  ((uint32_t)0x00000008)            /*!< Global OUT NAK status   */
+
+#define USB_OTG_DCTL_TCTL                    ((uint32_t)0x00000070)            /*!< Test control */
+#define USB_OTG_DCTL_TCTL_0                  ((uint32_t)0x00000010)            /*!<Bit 0 */
+#define USB_OTG_DCTL_TCTL_1                  ((uint32_t)0x00000020)            /*!<Bit 1 */
+#define USB_OTG_DCTL_TCTL_2                  ((uint32_t)0x00000040)            /*!<Bit 2 */
+#define USB_OTG_DCTL_SGINAK                  ((uint32_t)0x00000080)            /*!< Set global IN NAK         */
+#define USB_OTG_DCTL_CGINAK                  ((uint32_t)0x00000100)            /*!< Clear global IN NAK       */
+#define USB_OTG_DCTL_SGONAK                  ((uint32_t)0x00000200)            /*!< Set global OUT NAK        */
+#define USB_OTG_DCTL_CGONAK                  ((uint32_t)0x00000400)            /*!< Clear global OUT NAK      */
+#define USB_OTG_DCTL_POPRGDNE                ((uint32_t)0x00000800)            /*!< Power-on programming done */
+
+/********************  Bit definition for USB_OTG_HFIR register  ********************/
+#define USB_OTG_HFIR_FRIVL                   ((uint32_t)0x0000FFFF)            /*!< Frame interval */
+
+/********************  Bit definition for USB_OTG_HFNUM register  ********************/
+#define USB_OTG_HFNUM_FRNUM                   ((uint32_t)0x0000FFFF)            /*!< Frame number         */
+#define USB_OTG_HFNUM_FTREM                   ((uint32_t)0xFFFF0000)            /*!< Frame time remaining */
+
+/********************  Bit definition for USB_OTG_DSTS register  ********************/
+#define USB_OTG_DSTS_SUSPSTS                 ((uint32_t)0x00000001)            /*!< Suspend status   */
+
+#define USB_OTG_DSTS_ENUMSPD                 ((uint32_t)0x00000006)            /*!< Enumerated speed */
+#define USB_OTG_DSTS_ENUMSPD_0               ((uint32_t)0x00000002)            /*!<Bit 0 */
+#define USB_OTG_DSTS_ENUMSPD_1               ((uint32_t)0x00000004)            /*!<Bit 1 */
+#define USB_OTG_DSTS_EERR                    ((uint32_t)0x00000008)            /*!< Erratic error     */
+#define USB_OTG_DSTS_FNSOF                   ((uint32_t)0x003FFF00)            /*!< Frame number of the received SOF */
+
+/********************  Bit definition for USB_OTG_GAHBCFG register  ********************/
+#define USB_OTG_GAHBCFG_GINT                    ((uint32_t)0x00000001)            /*!< Global interrupt mask */
+#define USB_OTG_GAHBCFG_HBSTLEN                 ((uint32_t)0x0000001E)            /*!< Burst length/type */
+#define USB_OTG_GAHBCFG_HBSTLEN_0               ((uint32_t)0x00000002)            /*!<Bit 0 */
+#define USB_OTG_GAHBCFG_HBSTLEN_1               ((uint32_t)0x00000004)            /*!<Bit 1 */
+#define USB_OTG_GAHBCFG_HBSTLEN_2               ((uint32_t)0x00000008)            /*!<Bit 2 */
+#define USB_OTG_GAHBCFG_HBSTLEN_3               ((uint32_t)0x00000010)            /*!<Bit 3 */
+#define USB_OTG_GAHBCFG_DMAEN                   ((uint32_t)0x00000020)            /*!< DMA enable */
+#define USB_OTG_GAHBCFG_TXFELVL                 ((uint32_t)0x00000080)            /*!< TxFIFO empty level */
+#define USB_OTG_GAHBCFG_PTXFELVL                ((uint32_t)0x00000100)            /*!< Periodic TxFIFO empty level */
+
+/********************  Bit definition for USB_OTG_GUSBCFG register  ********************/
+#define USB_OTG_GUSBCFG_TOCAL                   ((uint32_t)0x00000007)            /*!< FS timeout calibration */
+#define USB_OTG_GUSBCFG_TOCAL_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TOCAL_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TOCAL_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_PHYSEL                  ((uint32_t)0x00000040)            /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */
+#define USB_OTG_GUSBCFG_SRPCAP                  ((uint32_t)0x00000100)            /*!< SRP-capable */
+#define USB_OTG_GUSBCFG_HNPCAP                  ((uint32_t)0x00000200)            /*!< HNP-capable */
+#define USB_OTG_GUSBCFG_TRDT                    ((uint32_t)0x00003C00)            /*!< USB turnaround time */
+#define USB_OTG_GUSBCFG_TRDT_0                  ((uint32_t)0x00000400)            /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TRDT_1                  ((uint32_t)0x00000800)            /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TRDT_2                  ((uint32_t)0x00001000)            /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_TRDT_3                  ((uint32_t)0x00002000)            /*!<Bit 3 */
+#define USB_OTG_GUSBCFG_PHYLPCS                 ((uint32_t)0x00008000)            /*!< PHY Low-power clock select */
+#define USB_OTG_GUSBCFG_ULPIFSLS                ((uint32_t)0x00020000)            /*!< ULPI FS/LS select               */
+#define USB_OTG_GUSBCFG_ULPIAR                  ((uint32_t)0x00040000)            /*!< ULPI Auto-resume                */
+#define USB_OTG_GUSBCFG_ULPICSM                 ((uint32_t)0x00080000)            /*!< ULPI Clock SuspendM             */
+#define USB_OTG_GUSBCFG_ULPIEVBUSD              ((uint32_t)0x00100000)            /*!< ULPI External VBUS Drive        */
+#define USB_OTG_GUSBCFG_ULPIEVBUSI              ((uint32_t)0x00200000)            /*!< ULPI external VBUS indicator    */
+#define USB_OTG_GUSBCFG_TSDPS                   ((uint32_t)0x00400000)            /*!< TermSel DLine pulsing selection */
+#define USB_OTG_GUSBCFG_PCCI                    ((uint32_t)0x00800000)            /*!< Indicator complement            */
+#define USB_OTG_GUSBCFG_PTCI                    ((uint32_t)0x01000000)            /*!< Indicator pass through          */
+#define USB_OTG_GUSBCFG_ULPIIPD                 ((uint32_t)0x02000000)            /*!< ULPI interface protect disable  */
+#define USB_OTG_GUSBCFG_FHMOD                   ((uint32_t)0x20000000)            /*!< Forced host mode                */
+#define USB_OTG_GUSBCFG_FDMOD                   ((uint32_t)0x40000000)            /*!< Forced peripheral mode          */
+#define USB_OTG_GUSBCFG_CTXPKT                  ((uint32_t)0x80000000)            /*!< Corrupt Tx packet               */
+
+/********************  Bit definition for USB_OTG_GRSTCTL register  ********************/
+#define USB_OTG_GRSTCTL_CSRST                   ((uint32_t)0x00000001)            /*!< Core soft reset          */
+#define USB_OTG_GRSTCTL_HSRST                   ((uint32_t)0x00000002)            /*!< HCLK soft reset          */
+#define USB_OTG_GRSTCTL_FCRST                   ((uint32_t)0x00000004)            /*!< Host frame counter reset */
+#define USB_OTG_GRSTCTL_RXFFLSH                 ((uint32_t)0x00000010)            /*!< RxFIFO flush             */
+#define USB_OTG_GRSTCTL_TXFFLSH                 ((uint32_t)0x00000020)            /*!< TxFIFO flush             */
+#define USB_OTG_GRSTCTL_TXFNUM                  ((uint32_t)0x000007C0)            /*!< TxFIFO number */
+#define USB_OTG_GRSTCTL_TXFNUM_0                ((uint32_t)0x00000040)            /*!<Bit 0 */
+#define USB_OTG_GRSTCTL_TXFNUM_1                ((uint32_t)0x00000080)            /*!<Bit 1 */
+#define USB_OTG_GRSTCTL_TXFNUM_2                ((uint32_t)0x00000100)            /*!<Bit 2 */
+#define USB_OTG_GRSTCTL_TXFNUM_3                ((uint32_t)0x00000200)            /*!<Bit 3 */
+#define USB_OTG_GRSTCTL_TXFNUM_4                ((uint32_t)0x00000400)            /*!<Bit 4 */
+#define USB_OTG_GRSTCTL_DMAREQ                  ((uint32_t)0x40000000)            /*!< DMA request signal */
+#define USB_OTG_GRSTCTL_AHBIDL                  ((uint32_t)0x80000000)            /*!< AHB master idle */
+
+/********************  Bit definition for USB_OTG_DIEPMSK register  ********************/
+#define USB_OTG_DIEPMSK_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed interrupt mask                 */
+#define USB_OTG_DIEPMSK_EPDM                    ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt mask                  */
+#define USB_OTG_DIEPMSK_TOM                     ((uint32_t)0x00000008)            /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPMSK_ITTXFEMSK               ((uint32_t)0x00000010)            /*!< IN token received when TxFIFO empty mask          */
+#define USB_OTG_DIEPMSK_INEPNMM                 ((uint32_t)0x00000020)            /*!< IN token received with EP mismatch mask           */
+#define USB_OTG_DIEPMSK_INEPNEM                 ((uint32_t)0x00000040)            /*!< IN endpoint NAK effective mask                    */
+#define USB_OTG_DIEPMSK_TXFURM                  ((uint32_t)0x00000100)            /*!< FIFO underrun mask                                */
+#define USB_OTG_DIEPMSK_BIM                     ((uint32_t)0x00000200)            /*!< BNA interrupt mask                                */
+
+/********************  Bit definition for USB_OTG_HPTXSTS register  ********************/
+#define USB_OTG_HPTXSTS_PTXFSAVL                ((uint32_t)0x0000FFFF)            /*!< Periodic transmit data FIFO space available     */
+#define USB_OTG_HPTXSTS_PTXQSAV                 ((uint32_t)0x00FF0000)            /*!< Periodic transmit request queue space available */
+#define USB_OTG_HPTXSTS_PTXQSAV_0               ((uint32_t)0x00010000)            /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQSAV_1               ((uint32_t)0x00020000)            /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQSAV_2               ((uint32_t)0x00040000)            /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQSAV_3               ((uint32_t)0x00080000)            /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQSAV_4               ((uint32_t)0x00100000)            /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQSAV_5               ((uint32_t)0x00200000)            /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQSAV_6               ((uint32_t)0x00400000)            /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQSAV_7               ((uint32_t)0x00800000)            /*!<Bit 7 */
+
+#define USB_OTG_HPTXSTS_PTXQTOP                 ((uint32_t)0xFF000000)            /*!< Top of the periodic transmit request queue */
+#define USB_OTG_HPTXSTS_PTXQTOP_0               ((uint32_t)0x01000000)            /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQTOP_1               ((uint32_t)0x02000000)            /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQTOP_2               ((uint32_t)0x04000000)            /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQTOP_3               ((uint32_t)0x08000000)            /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQTOP_4               ((uint32_t)0x10000000)            /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQTOP_5               ((uint32_t)0x20000000)            /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQTOP_6               ((uint32_t)0x40000000)            /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQTOP_7               ((uint32_t)0x80000000)            /*!<Bit 7 */
+
+/********************  Bit definition for USB_OTG_HAINT register  ********************/
+#define USB_OTG_HAINT_HAINT                   ((uint32_t)0x0000FFFF)            /*!< Channel interrupts */
+
+/********************  Bit definition for USB_OTG_DOEPMSK register  ********************/
+#define USB_OTG_DOEPMSK_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPMSK_EPDM                    ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt mask               */
+#define USB_OTG_DOEPMSK_STUPM                   ((uint32_t)0x00000008)            /*!< SETUP phase done mask                          */
+#define USB_OTG_DOEPMSK_OTEPDM                  ((uint32_t)0x00000010)            /*!< OUT token received when endpoint disabled mask */
+#define USB_OTG_DOEPMSK_OTEPSPRM                ((uint32_t)0x00000020)            /*!< Status Phase Received mask                     */
+#define USB_OTG_DOEPMSK_B2BSTUP                 ((uint32_t)0x00000040)            /*!< Back-to-back SETUP packets received mask       */
+#define USB_OTG_DOEPMSK_OPEM                    ((uint32_t)0x00000100)            /*!< OUT packet error mask                          */
+#define USB_OTG_DOEPMSK_BOIM                    ((uint32_t)0x00000200)            /*!< BNA interrupt mask                             */
+
+/********************  Bit definition for USB_OTG_GINTSTS register  ********************/
+#define USB_OTG_GINTSTS_CMOD                    ((uint32_t)0x00000001)            /*!< Current mode of operation                      */
+#define USB_OTG_GINTSTS_MMIS                    ((uint32_t)0x00000002)            /*!< Mode mismatch interrupt                        */
+#define USB_OTG_GINTSTS_OTGINT                  ((uint32_t)0x00000004)            /*!< OTG interrupt                                  */
+#define USB_OTG_GINTSTS_SOF                     ((uint32_t)0x00000008)            /*!< Start of frame                                 */
+#define USB_OTG_GINTSTS_RXFLVL                  ((uint32_t)0x00000010)            /*!< RxFIFO nonempty                                */
+#define USB_OTG_GINTSTS_NPTXFE                  ((uint32_t)0x00000020)            /*!< Nonperiodic TxFIFO empty                       */
+#define USB_OTG_GINTSTS_GINAKEFF                ((uint32_t)0x00000040)            /*!< Global IN nonperiodic NAK effective            */
+#define USB_OTG_GINTSTS_BOUTNAKEFF              ((uint32_t)0x00000080)            /*!< Global OUT NAK effective                       */
+#define USB_OTG_GINTSTS_ESUSP                   ((uint32_t)0x00000400)            /*!< Early suspend                                  */
+#define USB_OTG_GINTSTS_USBSUSP                 ((uint32_t)0x00000800)            /*!< USB suspend                                    */
+#define USB_OTG_GINTSTS_USBRST                  ((uint32_t)0x00001000)            /*!< USB reset                                      */
+#define USB_OTG_GINTSTS_ENUMDNE                 ((uint32_t)0x00002000)            /*!< Enumeration done                               */
+#define USB_OTG_GINTSTS_ISOODRP                 ((uint32_t)0x00004000)            /*!< Isochronous OUT packet dropped interrupt       */
+#define USB_OTG_GINTSTS_EOPF                    ((uint32_t)0x00008000)            /*!< End of periodic frame interrupt                */
+#define USB_OTG_GINTSTS_IEPINT                  ((uint32_t)0x00040000)            /*!< IN endpoint interrupt                          */
+#define USB_OTG_GINTSTS_OEPINT                  ((uint32_t)0x00080000)            /*!< OUT endpoint interrupt                         */
+#define USB_OTG_GINTSTS_IISOIXFR                ((uint32_t)0x00100000)            /*!< Incomplete isochronous IN transfer             */
+#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT       ((uint32_t)0x00200000)            /*!< Incomplete periodic transfer                   */
+#define USB_OTG_GINTSTS_DATAFSUSP               ((uint32_t)0x00400000)            /*!< Data fetch suspended                           */
+#define USB_OTG_GINTSTS_RSTDET                  ((uint32_t)0x00800000)            /*!< Reset detected interrupt                       */
+#define USB_OTG_GINTSTS_HPRTINT                 ((uint32_t)0x01000000)            /*!< Host port interrupt                            */
+#define USB_OTG_GINTSTS_HCINT                   ((uint32_t)0x02000000)            /*!< Host channels interrupt                        */
+#define USB_OTG_GINTSTS_PTXFE                   ((uint32_t)0x04000000)            /*!< Periodic TxFIFO empty                          */
+#define USB_OTG_GINTSTS_LPMINT                  ((uint32_t)0x08000000)            /*!< LPM interrupt                                  */
+#define USB_OTG_GINTSTS_CIDSCHG                 ((uint32_t)0x10000000)            /*!< Connector ID status change                     */
+#define USB_OTG_GINTSTS_DISCINT                 ((uint32_t)0x20000000)            /*!< Disconnect detected interrupt                  */
+#define USB_OTG_GINTSTS_SRQINT                  ((uint32_t)0x40000000)            /*!< Session request/new session detected interrupt */
+#define USB_OTG_GINTSTS_WKUINT                  ((uint32_t)0x80000000)            /*!< Resume/remote wakeup detected interrupt        */
+
+/********************  Bit definition for USB_OTG_GINTMSK register  ********************/
+#define USB_OTG_GINTMSK_MMISM                   ((uint32_t)0x00000002)            /*!< Mode mismatch interrupt mask                        */
+#define USB_OTG_GINTMSK_OTGINT                  ((uint32_t)0x00000004)            /*!< OTG interrupt mask                                  */
+#define USB_OTG_GINTMSK_SOFM                    ((uint32_t)0x00000008)            /*!< Start of frame mask                                 */
+#define USB_OTG_GINTMSK_RXFLVLM                 ((uint32_t)0x00000010)            /*!< Receive FIFO nonempty mask                          */
+#define USB_OTG_GINTMSK_NPTXFEM                 ((uint32_t)0x00000020)            /*!< Nonperiodic TxFIFO empty mask                       */
+#define USB_OTG_GINTMSK_GINAKEFFM               ((uint32_t)0x00000040)            /*!< Global nonperiodic IN NAK effective mask            */
+#define USB_OTG_GINTMSK_GONAKEFFM               ((uint32_t)0x00000080)            /*!< Global OUT NAK effective mask                       */
+#define USB_OTG_GINTMSK_ESUSPM                  ((uint32_t)0x00000400)            /*!< Early suspend mask                                  */
+#define USB_OTG_GINTMSK_USBSUSPM                ((uint32_t)0x00000800)            /*!< USB suspend mask                                    */
+#define USB_OTG_GINTMSK_USBRST                  ((uint32_t)0x00001000)            /*!< USB reset mask                                      */
+#define USB_OTG_GINTMSK_ENUMDNEM                ((uint32_t)0x00002000)            /*!< Enumeration done mask                               */
+#define USB_OTG_GINTMSK_ISOODRPM                ((uint32_t)0x00004000)            /*!< Isochronous OUT packet dropped interrupt mask       */
+#define USB_OTG_GINTMSK_EOPFM                   ((uint32_t)0x00008000)            /*!< End of periodic frame interrupt mask                */
+#define USB_OTG_GINTMSK_EPMISM                  ((uint32_t)0x00020000)            /*!< Endpoint mismatch interrupt mask                    */
+#define USB_OTG_GINTMSK_IEPINT                  ((uint32_t)0x00040000)            /*!< IN endpoints interrupt mask                         */
+#define USB_OTG_GINTMSK_OEPINT                  ((uint32_t)0x00080000)            /*!< OUT endpoints interrupt mask                        */
+#define USB_OTG_GINTMSK_IISOIXFRM               ((uint32_t)0x00100000)            /*!< Incomplete isochronous IN transfer mask             */
+#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM         ((uint32_t)0x00200000)            /*!< Incomplete periodic transfer mask                   */
+#define USB_OTG_GINTMSK_FSUSPM                  ((uint32_t)0x00400000)            /*!< Data fetch suspended mask                           */
+#define USB_OTG_GINTMSK_RSTDEM                  ((uint32_t)0x00800000)            /*!< Reset detected interrupt mask                      */
+#define USB_OTG_GINTMSK_PRTIM                   ((uint32_t)0x01000000)            /*!< Host port interrupt mask                            */
+#define USB_OTG_GINTMSK_HCIM                    ((uint32_t)0x02000000)            /*!< Host channels interrupt mask                        */
+#define USB_OTG_GINTMSK_PTXFEM                  ((uint32_t)0x04000000)            /*!< Periodic TxFIFO empty mask                          */
+#define USB_OTG_GINTMSK_LPMINTM                 ((uint32_t)0x08000000)            /*!< LPM interrupt Mask                                  */
+#define USB_OTG_GINTMSK_CIDSCHGM                ((uint32_t)0x10000000)            /*!< Connector ID status change mask                     */
+#define USB_OTG_GINTMSK_DISCINT                 ((uint32_t)0x20000000)            /*!< Disconnect detected interrupt mask                  */
+#define USB_OTG_GINTMSK_SRQIM                   ((uint32_t)0x40000000)            /*!< Session request/new session detected interrupt mask */
+#define USB_OTG_GINTMSK_WUIM                    ((uint32_t)0x80000000)            /*!< Resume/remote wakeup detected interrupt mask        */
+
+/********************  Bit definition for USB_OTG_DAINT register  ********************/
+#define USB_OTG_DAINT_IEPINT                  ((uint32_t)0x0000FFFF)            /*!< IN endpoint interrupt bits  */
+#define USB_OTG_DAINT_OEPINT                  ((uint32_t)0xFFFF0000)            /*!< OUT endpoint interrupt bits */
+
+/********************  Bit definition for USB_OTG_HAINTMSK register  ********************/
+#define USB_OTG_HAINTMSK_HAINTM                  ((uint32_t)0x0000FFFF)            /*!< Channel interrupt mask */
+
+/********************  Bit definition for USB_OTG_GRXSTSP register  ********************/
+#define USB_OTG_GRXSTSP_EPNUM                    ((uint32_t)0x0000000F)            /*!< IN EP interrupt mask bits  */
+#define USB_OTG_GRXSTSP_BCNT                     ((uint32_t)0x00007FF0)            /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_DPID                     ((uint32_t)0x00018000)            /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_PKTSTS                   ((uint32_t)0x001E0000)            /*!< OUT EP interrupt mask bits */
+
+/********************  Bit definition for USB_OTG_DAINTMSK register  ********************/
+#define USB_OTG_DAINTMSK_IEPM                    ((uint32_t)0x0000FFFF)            /*!< IN EP interrupt mask bits */
+#define USB_OTG_DAINTMSK_OEPM                    ((uint32_t)0xFFFF0000)            /*!< OUT EP interrupt mask bits */
+
+/********************  Bit definition for OTG register  ********************/
+
+#define USB_OTG_CHNUM                   ((uint32_t)0x0000000F)            /*!< Channel number */
+#define USB_OTG_CHNUM_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_CHNUM_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_CHNUM_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_CHNUM_3                 ((uint32_t)0x00000008)            /*!<Bit 3 */
+#define USB_OTG_BCNT                    ((uint32_t)0x00007FF0)            /*!< Byte count */
+
+#define USB_OTG_DPID                    ((uint32_t)0x00018000)            /*!< Data PID */
+#define USB_OTG_DPID_0                  ((uint32_t)0x00008000)            /*!<Bit 0 */
+#define USB_OTG_DPID_1                  ((uint32_t)0x00010000)            /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS                  ((uint32_t)0x001E0000)            /*!< Packet status */
+#define USB_OTG_PKTSTS_0                ((uint32_t)0x00020000)            /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1                ((uint32_t)0x00040000)            /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2                ((uint32_t)0x00080000)            /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3                ((uint32_t)0x00100000)            /*!<Bit 3 */
+
+#define USB_OTG_EPNUM                   ((uint32_t)0x0000000F)            /*!< Endpoint number */
+#define USB_OTG_EPNUM_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_EPNUM_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_EPNUM_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_EPNUM_3                 ((uint32_t)0x00000008)            /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM                  ((uint32_t)0x01E00000)            /*!< Frame number */
+#define USB_OTG_FRMNUM_0                ((uint32_t)0x00200000)            /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1                ((uint32_t)0x00400000)            /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2                ((uint32_t)0x00800000)            /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3                ((uint32_t)0x01000000)            /*!<Bit 3 */
+
+/********************  Bit definition for OTG register  ********************/
+
+#define USB_OTG_CHNUM                   ((uint32_t)0x0000000F)            /*!< Channel number */
+#define USB_OTG_CHNUM_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_CHNUM_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_CHNUM_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_CHNUM_3                 ((uint32_t)0x00000008)            /*!<Bit 3 */
+#define USB_OTG_BCNT                    ((uint32_t)0x00007FF0)            /*!< Byte count */
+
+#define USB_OTG_DPID                    ((uint32_t)0x00018000)            /*!< Data PID */
+#define USB_OTG_DPID_0                  ((uint32_t)0x00008000)            /*!<Bit 0 */
+#define USB_OTG_DPID_1                  ((uint32_t)0x00010000)            /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS                  ((uint32_t)0x001E0000)            /*!< Packet status */
+#define USB_OTG_PKTSTS_0                ((uint32_t)0x00020000)            /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1                ((uint32_t)0x00040000)            /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2                ((uint32_t)0x00080000)            /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3                ((uint32_t)0x00100000)            /*!<Bit 3 */
+
+#define USB_OTG_EPNUM                   ((uint32_t)0x0000000F)            /*!< Endpoint number */
+#define USB_OTG_EPNUM_0                 ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_EPNUM_1                 ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_EPNUM_2                 ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_EPNUM_3                 ((uint32_t)0x00000008)            /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM                  ((uint32_t)0x01E00000)            /*!< Frame number */
+#define USB_OTG_FRMNUM_0                ((uint32_t)0x00200000)            /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1                ((uint32_t)0x00400000)            /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2                ((uint32_t)0x00800000)            /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3                ((uint32_t)0x01000000)            /*!<Bit 3 */
+
+/********************  Bit definition for USB_OTG_GRXFSIZ register  ********************/
+#define USB_OTG_GRXFSIZ_RXFD            ((uint32_t)0x0000FFFF)            /*!< RxFIFO depth */
+
+/********************  Bit definition for USB_OTG_DVBUSDIS register  ********************/
+#define USB_OTG_DVBUSDIS_VBUSDT         ((uint32_t)0x0000FFFF)            /*!< Device VBUS discharge time */
+
+/********************  Bit definition for OTG register  ********************/
+#define USB_OTG_NPTXFSA                 ((uint32_t)0x0000FFFF)            /*!< Nonperiodic transmit RAM start address */
+#define USB_OTG_NPTXFD                  ((uint32_t)0xFFFF0000)            /*!< Nonperiodic TxFIFO depth               */
+#define USB_OTG_TX0FSA                  ((uint32_t)0x0000FFFF)            /*!< Endpoint 0 transmit RAM start address  */
+#define USB_OTG_TX0FD                   ((uint32_t)0xFFFF0000)            /*!< Endpoint 0 TxFIFO depth                */
+
+/********************  Bit definition for USB_OTG_DVBUSPULSE register  ********************/
+#define USB_OTG_DVBUSPULSE_DVBUSP                  ((uint32_t)0x00000FFF)            /*!< Device VBUS pulsing time */
+
+/********************  Bit definition for USB_OTG_GNPTXSTS register  ********************/
+#define USB_OTG_GNPTXSTS_NPTXFSAV                ((uint32_t)0x0000FFFF)            /*!< Nonperiodic TxFIFO space available */
+
+#define USB_OTG_GNPTXSTS_NPTQXSAV                ((uint32_t)0x00FF0000)            /*!< Nonperiodic transmit request queue space available */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_0              ((uint32_t)0x00010000)            /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_1              ((uint32_t)0x00020000)            /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_2              ((uint32_t)0x00040000)            /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_3              ((uint32_t)0x00080000)            /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_4              ((uint32_t)0x00100000)            /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_5              ((uint32_t)0x00200000)            /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_6              ((uint32_t)0x00400000)            /*!<Bit 6 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_7              ((uint32_t)0x00800000)            /*!<Bit 7 */
+
+#define USB_OTG_GNPTXSTS_NPTXQTOP                ((uint32_t)0x7F000000)            /*!< Top of the nonperiodic transmit request queue */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_0              ((uint32_t)0x01000000)            /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_1              ((uint32_t)0x02000000)            /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_2              ((uint32_t)0x04000000)            /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_3              ((uint32_t)0x08000000)            /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_4              ((uint32_t)0x10000000)            /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_5              ((uint32_t)0x20000000)            /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_6              ((uint32_t)0x40000000)            /*!<Bit 6 */
+
+/********************  Bit definition for USB_OTG_DTHRCTL register  ********************/
+#define USB_OTG_DTHRCTL_NONISOTHREN             ((uint32_t)0x00000001)            /*!< Nonisochronous IN endpoints threshold enable */
+#define USB_OTG_DTHRCTL_ISOTHREN                ((uint32_t)0x00000002)            /*!< ISO IN endpoint threshold enable */
+
+#define USB_OTG_DTHRCTL_TXTHRLEN                ((uint32_t)0x000007FC)            /*!< Transmit threshold length */
+#define USB_OTG_DTHRCTL_TXTHRLEN_0              ((uint32_t)0x00000004)            /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_1              ((uint32_t)0x00000008)            /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_2              ((uint32_t)0x00000010)            /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_3              ((uint32_t)0x00000020)            /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_4              ((uint32_t)0x00000040)            /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_5              ((uint32_t)0x00000080)            /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_6              ((uint32_t)0x00000100)            /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_7              ((uint32_t)0x00000200)            /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_8              ((uint32_t)0x00000400)            /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_RXTHREN                 ((uint32_t)0x00010000)            /*!< Receive threshold enable */
+
+#define USB_OTG_DTHRCTL_RXTHRLEN                ((uint32_t)0x03FE0000)            /*!< Receive threshold length */
+#define USB_OTG_DTHRCTL_RXTHRLEN_0              ((uint32_t)0x00020000)            /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_1              ((uint32_t)0x00040000)            /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_2              ((uint32_t)0x00080000)            /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_3              ((uint32_t)0x00100000)            /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_4              ((uint32_t)0x00200000)            /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_5              ((uint32_t)0x00400000)            /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_6              ((uint32_t)0x00800000)            /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_7              ((uint32_t)0x01000000)            /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_8              ((uint32_t)0x02000000)            /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_ARPEN                   ((uint32_t)0x08000000)            /*!< Arbiter parking enable */
+
+/********************  Bit definition for USB_OTG_DIEPEMPMSK register  ********************/
+#define USB_OTG_DIEPEMPMSK_INEPTXFEM               ((uint32_t)0x0000FFFF)         /*!< IN EP Tx FIFO empty interrupt mask bits */
+
+/********************  Bit definition for USB_OTG_DEACHINT register  ********************/
+#define USB_OTG_DEACHINT_IEP1INT                 ((uint32_t)0x00000002)           /*!< IN endpoint 1interrupt bit   */
+#define USB_OTG_DEACHINT_OEP1INT                 ((uint32_t)0x00020000)           /*!< OUT endpoint 1 interrupt bit */
+
+/********************  Bit definition for USB_OTG_GCCFG register  ********************/
+#define USB_OTG_GCCFG_PWRDWN                 ((uint32_t)0x00010000)              /*!< Power down */
+#define USB_OTG_GCCFG_VBDEN                  ((uint32_t)0x00200000)              /*!< USB VBUS Detection Enable */
+
+/********************  Bit definition for USB_OTG_GPWRDN) register  ********************/
+#define USB_OTG_GPWRDN_ADPMEN                 ((uint32_t)0x00000001)             /*!< ADP module enable */
+#define USB_OTG_GPWRDN_ADPIF                  ((uint32_t)0x00800000)             /*!< ADP Interrupt flag */
+
+/********************  Bit definition for USB_OTG_DEACHINTMSK register  ********************/
+#define USB_OTG_DEACHINTMSK_IEP1INTM          ((uint32_t)0x00000002)            /*!< IN Endpoint 1 interrupt mask bit  */
+#define USB_OTG_DEACHINTMSK_OEP1INTM          ((uint32_t)0x00020000)            /*!< OUT Endpoint 1 interrupt mask bit */
+ 
+/********************  Bit definition for USB_OTG_CID register  ********************/
+#define USB_OTG_CID_PRODUCT_ID               ((uint32_t)0xFFFFFFFF)            /*!< Product ID field */
+
+/********************  Bit definition for USB_OTG_GLPMCFG register  ********************/
+#define  USB_OTG_GLPMCFG_LPMEN               ((uint32_t)0x00000001)            /*!< LPM support enable                                     */
+#define  USB_OTG_GLPMCFG_LPMACK              ((uint32_t)0x00000002)            /*!< LPM Token acknowledge enable                           */
+#define  USB_OTG_GLPMCFG_BESL                ((uint32_t)0x0000003C)            /*!< BESL value received with last ACKed LPM Token          */
+#define  USB_OTG_GLPMCFG_REMWAKE             ((uint32_t)0x00000040)            /*!< bRemoteWake value received with last ACKed LPM Token   */
+#define  USB_OTG_GLPMCFG_L1SSEN              ((uint32_t)0x00000080)            /*!< L1 shallow sleep enable                                */
+#define  USB_OTG_GLPMCFG_BESLTHRS            ((uint32_t)0x00000F00)            /*!< BESL threshold                                         */
+#define  USB_OTG_GLPMCFG_L1DSEN              ((uint32_t)0x00001000)            /*!< L1 deep sleep enable                                   */
+#define  USB_OTG_GLPMCFG_LPMRSP              ((uint32_t)0x00006000)            /*!< LPM response                                           */
+#define  USB_OTG_GLPMCFG_SLPSTS              ((uint32_t)0x00008000)            /*!< Port sleep status                                      */
+#define  USB_OTG_GLPMCFG_L1RSMOK             ((uint32_t)0x00010000)            /*!< Sleep State Resume OK                                  */
+#define  USB_OTG_GLPMCFG_LPMCHIDX            ((uint32_t)0x001E0000)            /*!< LPM Channel Index                                      */
+#define  USB_OTG_GLPMCFG_LPMRCNT             ((uint32_t)0x00E00000)            /*!< LPM retry count                                        */
+#define  USB_OTG_GLPMCFG_SNDLPM              ((uint32_t)0x01000000)            /*!< Send LPM transaction                                   */
+#define  USB_OTG_GLPMCFG_LPMRCNTSTS          ((uint32_t)0x0E000000)            /*!< LPM retry count status                                 */
+#define  USB_OTG_GLPMCFG_ENBESL              ((uint32_t)0x10000000)            /*!< Enable best effort service latency                     */
+
+/********************  Bit definition for USB_OTG_DIEPEACHMSK1 register  ********************/
+#define USB_OTG_DIEPEACHMSK1_XFRCM           ((uint32_t)0x00000001)            /*!< Transfer completed interrupt mask                 */
+#define USB_OTG_DIEPEACHMSK1_EPDM            ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt mask                  */
+#define USB_OTG_DIEPEACHMSK1_TOM             ((uint32_t)0x00000008)            /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK       ((uint32_t)0x00000010)            /*!< IN token received when TxFIFO empty mask          */
+#define USB_OTG_DIEPEACHMSK1_INEPNMM         ((uint32_t)0x00000020)            /*!< IN token received with EP mismatch mask           */
+#define USB_OTG_DIEPEACHMSK1_INEPNEM         ((uint32_t)0x00000040)            /*!< IN endpoint NAK effective mask                    */
+#define USB_OTG_DIEPEACHMSK1_TXFURM          ((uint32_t)0x00000100)            /*!< FIFO underrun mask                                */
+#define USB_OTG_DIEPEACHMSK1_BIM             ((uint32_t)0x00000200)            /*!< BNA interrupt mask                                */
+#define USB_OTG_DIEPEACHMSK1_NAKM            ((uint32_t)0x00002000)            /*!< NAK interrupt mask                                */
+
+/********************  Bit definition for USB_OTG_HPRT register  ********************/
+#define USB_OTG_HPRT_PCSTS                   ((uint32_t)0x00000001)            /*!< Port connect status        */
+#define USB_OTG_HPRT_PCDET                   ((uint32_t)0x00000002)            /*!< Port connect detected      */
+#define USB_OTG_HPRT_PENA                    ((uint32_t)0x00000004)            /*!< Port enable                */
+#define USB_OTG_HPRT_PENCHNG                 ((uint32_t)0x00000008)            /*!< Port enable/disable change */
+#define USB_OTG_HPRT_POCA                    ((uint32_t)0x00000010)            /*!< Port overcurrent active    */
+#define USB_OTG_HPRT_POCCHNG                 ((uint32_t)0x00000020)            /*!< Port overcurrent change    */
+#define USB_OTG_HPRT_PRES                    ((uint32_t)0x00000040)            /*!< Port resume                */
+#define USB_OTG_HPRT_PSUSP                   ((uint32_t)0x00000080)            /*!< Port suspend               */
+#define USB_OTG_HPRT_PRST                    ((uint32_t)0x00000100)            /*!< Port reset                 */
+
+#define USB_OTG_HPRT_PLSTS                   ((uint32_t)0x00000C00)            /*!< Port line status           */
+#define USB_OTG_HPRT_PLSTS_0                 ((uint32_t)0x00000400)            /*!<Bit 0 */
+#define USB_OTG_HPRT_PLSTS_1                 ((uint32_t)0x00000800)            /*!<Bit 1 */
+#define USB_OTG_HPRT_PPWR                    ((uint32_t)0x00001000)            /*!< Port power                 */
+
+#define USB_OTG_HPRT_PTCTL                   ((uint32_t)0x0001E000)            /*!< Port test control          */
+#define USB_OTG_HPRT_PTCTL_0                 ((uint32_t)0x00002000)            /*!<Bit 0 */
+#define USB_OTG_HPRT_PTCTL_1                 ((uint32_t)0x00004000)            /*!<Bit 1 */
+#define USB_OTG_HPRT_PTCTL_2                 ((uint32_t)0x00008000)            /*!<Bit 2 */
+#define USB_OTG_HPRT_PTCTL_3                 ((uint32_t)0x00010000)            /*!<Bit 3 */
+
+#define USB_OTG_HPRT_PSPD                    ((uint32_t)0x00060000)            /*!< Port speed                 */
+#define USB_OTG_HPRT_PSPD_0                  ((uint32_t)0x00020000)            /*!<Bit 0 */
+#define USB_OTG_HPRT_PSPD_1                  ((uint32_t)0x00040000)            /*!<Bit 1 */
+
+/********************  Bit definition for USB_OTG_DOEPEACHMSK1 register  ********************/
+#define USB_OTG_DOEPEACHMSK1_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed interrupt mask         */
+#define USB_OTG_DOEPEACHMSK1_EPDM                    ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt mask          */
+#define USB_OTG_DOEPEACHMSK1_TOM                     ((uint32_t)0x00000008)            /*!< Timeout condition mask                    */
+#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK               ((uint32_t)0x00000010)            /*!< IN token received when TxFIFO empty mask  */
+#define USB_OTG_DOEPEACHMSK1_INEPNMM                 ((uint32_t)0x00000020)            /*!< IN token received with EP mismatch mask   */
+#define USB_OTG_DOEPEACHMSK1_INEPNEM                 ((uint32_t)0x00000040)            /*!< IN endpoint NAK effective mask            */
+#define USB_OTG_DOEPEACHMSK1_TXFURM                  ((uint32_t)0x00000100)            /*!< OUT packet error mask                     */
+#define USB_OTG_DOEPEACHMSK1_BIM                     ((uint32_t)0x00000200)            /*!< BNA interrupt mask                        */
+#define USB_OTG_DOEPEACHMSK1_BERRM                   ((uint32_t)0x00001000)            /*!< Bubble error interrupt mask               */
+#define USB_OTG_DOEPEACHMSK1_NAKM                    ((uint32_t)0x00002000)            /*!< NAK interrupt mask                        */
+#define USB_OTG_DOEPEACHMSK1_NYETM                   ((uint32_t)0x00004000)            /*!< NYET interrupt mask                       */
+
+/********************  Bit definition for USB_OTG_HPTXFSIZ register  ********************/
+#define USB_OTG_HPTXFSIZ_PTXSA                   ((uint32_t)0x0000FFFF)            /*!< Host periodic TxFIFO start address            */
+#define USB_OTG_HPTXFSIZ_PTXFD                   ((uint32_t)0xFFFF0000)            /*!< Host periodic TxFIFO depth                    */
+
+/********************  Bit definition for USB_OTG_DIEPCTL register  ********************/
+#define USB_OTG_DIEPCTL_MPSIZ                   ((uint32_t)0x000007FF)            /*!< Maximum packet size              */
+#define USB_OTG_DIEPCTL_USBAEP                  ((uint32_t)0x00008000)            /*!< USB active endpoint              */
+#define USB_OTG_DIEPCTL_EONUM_DPID              ((uint32_t)0x00010000)            /*!< Even/odd frame                   */
+#define USB_OTG_DIEPCTL_NAKSTS                  ((uint32_t)0x00020000)            /*!< NAK status                       */
+
+#define USB_OTG_DIEPCTL_EPTYP                   ((uint32_t)0x000C0000)            /*!< Endpoint type                    */
+#define USB_OTG_DIEPCTL_EPTYP_0                 ((uint32_t)0x00040000)            /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_EPTYP_1                 ((uint32_t)0x00080000)            /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_STALL                   ((uint32_t)0x00200000)            /*!< STALL handshake                  */
+
+#define USB_OTG_DIEPCTL_TXFNUM                  ((uint32_t)0x03C00000)            /*!< TxFIFO number                    */
+#define USB_OTG_DIEPCTL_TXFNUM_0                ((uint32_t)0x00400000)            /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_TXFNUM_1                ((uint32_t)0x00800000)            /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_TXFNUM_2                ((uint32_t)0x01000000)            /*!<Bit 2 */
+#define USB_OTG_DIEPCTL_TXFNUM_3                ((uint32_t)0x02000000)            /*!<Bit 3 */
+#define USB_OTG_DIEPCTL_CNAK                    ((uint32_t)0x04000000)            /*!< Clear NAK                        */
+#define USB_OTG_DIEPCTL_SNAK                    ((uint32_t)0x08000000)            /*!< Set NAK */
+#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM          ((uint32_t)0x10000000)            /*!< Set DATA0 PID                    */
+#define USB_OTG_DIEPCTL_SODDFRM                 ((uint32_t)0x20000000)            /*!< Set odd frame                    */
+#define USB_OTG_DIEPCTL_EPDIS                   ((uint32_t)0x40000000)            /*!< Endpoint disable                 */
+#define USB_OTG_DIEPCTL_EPENA                   ((uint32_t)0x80000000)            /*!< Endpoint enable                  */
+
+/********************  Bit definition for USB_OTG_HCCHAR register  ********************/
+#define USB_OTG_HCCHAR_MPSIZ                   ((uint32_t)0x000007FF)            /*!< Maximum packet size */
+
+#define USB_OTG_HCCHAR_EPNUM                   ((uint32_t)0x00007800)            /*!< Endpoint number */
+#define USB_OTG_HCCHAR_EPNUM_0                 ((uint32_t)0x00000800)            /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPNUM_1                 ((uint32_t)0x00001000)            /*!<Bit 1 */
+#define USB_OTG_HCCHAR_EPNUM_2                 ((uint32_t)0x00002000)            /*!<Bit 2 */
+#define USB_OTG_HCCHAR_EPNUM_3                 ((uint32_t)0x00004000)            /*!<Bit 3 */
+#define USB_OTG_HCCHAR_EPDIR                   ((uint32_t)0x00008000)            /*!< Endpoint direction */
+#define USB_OTG_HCCHAR_LSDEV                   ((uint32_t)0x00020000)            /*!< Low-speed device */
+
+#define USB_OTG_HCCHAR_EPTYP                   ((uint32_t)0x000C0000)            /*!< Endpoint type */
+#define USB_OTG_HCCHAR_EPTYP_0                 ((uint32_t)0x00040000)            /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPTYP_1                 ((uint32_t)0x00080000)            /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_MC                      ((uint32_t)0x00300000)            /*!< Multi Count (MC) / Error Count (EC) */
+#define USB_OTG_HCCHAR_MC_0                    ((uint32_t)0x00100000)            /*!<Bit 0 */
+#define USB_OTG_HCCHAR_MC_1                    ((uint32_t)0x00200000)            /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_DAD                     ((uint32_t)0x1FC00000)            /*!< Device address */
+#define USB_OTG_HCCHAR_DAD_0                   ((uint32_t)0x00400000)            /*!<Bit 0 */
+#define USB_OTG_HCCHAR_DAD_1                   ((uint32_t)0x00800000)            /*!<Bit 1 */
+#define USB_OTG_HCCHAR_DAD_2                   ((uint32_t)0x01000000)            /*!<Bit 2 */
+#define USB_OTG_HCCHAR_DAD_3                   ((uint32_t)0x02000000)            /*!<Bit 3 */
+#define USB_OTG_HCCHAR_DAD_4                   ((uint32_t)0x04000000)            /*!<Bit 4 */
+#define USB_OTG_HCCHAR_DAD_5                   ((uint32_t)0x08000000)            /*!<Bit 5 */
+#define USB_OTG_HCCHAR_DAD_6                   ((uint32_t)0x10000000)            /*!<Bit 6 */
+#define USB_OTG_HCCHAR_ODDFRM                  ((uint32_t)0x20000000)            /*!< Odd frame */
+#define USB_OTG_HCCHAR_CHDIS                   ((uint32_t)0x40000000)            /*!< Channel disable */
+#define USB_OTG_HCCHAR_CHENA                   ((uint32_t)0x80000000)            /*!< Channel enable */
+
+/********************  Bit definition for USB_OTG_HCSPLT register  ********************/
+
+#define USB_OTG_HCSPLT_PRTADDR                 ((uint32_t)0x0000007F)            /*!< Port address */
+#define USB_OTG_HCSPLT_PRTADDR_0               ((uint32_t)0x00000001)            /*!<Bit 0 */
+#define USB_OTG_HCSPLT_PRTADDR_1               ((uint32_t)0x00000002)            /*!<Bit 1 */
+#define USB_OTG_HCSPLT_PRTADDR_2               ((uint32_t)0x00000004)            /*!<Bit 2 */
+#define USB_OTG_HCSPLT_PRTADDR_3               ((uint32_t)0x00000008)            /*!<Bit 3 */
+#define USB_OTG_HCSPLT_PRTADDR_4               ((uint32_t)0x00000010)            /*!<Bit 4 */
+#define USB_OTG_HCSPLT_PRTADDR_5               ((uint32_t)0x00000020)            /*!<Bit 5 */
+#define USB_OTG_HCSPLT_PRTADDR_6               ((uint32_t)0x00000040)            /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_HUBADDR                 ((uint32_t)0x00003F80)            /*!< Hub address */
+#define USB_OTG_HCSPLT_HUBADDR_0               ((uint32_t)0x00000080)            /*!<Bit 0 */
+#define USB_OTG_HCSPLT_HUBADDR_1               ((uint32_t)0x00000100)            /*!<Bit 1 */
+#define USB_OTG_HCSPLT_HUBADDR_2               ((uint32_t)0x00000200)            /*!<Bit 2 */
+#define USB_OTG_HCSPLT_HUBADDR_3               ((uint32_t)0x00000400)            /*!<Bit 3 */
+#define USB_OTG_HCSPLT_HUBADDR_4               ((uint32_t)0x00000800)            /*!<Bit 4 */
+#define USB_OTG_HCSPLT_HUBADDR_5               ((uint32_t)0x00001000)            /*!<Bit 5 */
+#define USB_OTG_HCSPLT_HUBADDR_6               ((uint32_t)0x00002000)            /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_XACTPOS                 ((uint32_t)0x0000C000)            /*!< XACTPOS */
+#define USB_OTG_HCSPLT_XACTPOS_0               ((uint32_t)0x00004000)            /*!<Bit 0 */
+#define USB_OTG_HCSPLT_XACTPOS_1               ((uint32_t)0x00008000)            /*!<Bit 1 */
+#define USB_OTG_HCSPLT_COMPLSPLT               ((uint32_t)0x00010000)            /*!< Do complete split */
+#define USB_OTG_HCSPLT_SPLITEN                 ((uint32_t)0x80000000)            /*!< Split enable */
+
+/********************  Bit definition for USB_OTG_HCINT register  ********************/
+#define USB_OTG_HCINT_XFRC                    ((uint32_t)0x00000001)            /*!< Transfer completed */
+#define USB_OTG_HCINT_CHH                     ((uint32_t)0x00000002)            /*!< Channel halted */
+#define USB_OTG_HCINT_AHBERR                  ((uint32_t)0x00000004)            /*!< AHB error */
+#define USB_OTG_HCINT_STALL                   ((uint32_t)0x00000008)            /*!< STALL response received interrupt */
+#define USB_OTG_HCINT_NAK                     ((uint32_t)0x00000010)            /*!< NAK response received interrupt */
+#define USB_OTG_HCINT_ACK                     ((uint32_t)0x00000020)            /*!< ACK response received/transmitted interrupt */
+#define USB_OTG_HCINT_NYET                    ((uint32_t)0x00000040)            /*!< Response received interrupt */
+#define USB_OTG_HCINT_TXERR                   ((uint32_t)0x00000080)            /*!< Transaction error */
+#define USB_OTG_HCINT_BBERR                   ((uint32_t)0x00000100)            /*!< Babble error */
+#define USB_OTG_HCINT_FRMOR                   ((uint32_t)0x00000200)            /*!< Frame overrun */
+#define USB_OTG_HCINT_DTERR                   ((uint32_t)0x00000400)            /*!< Data toggle error */
+
+/********************  Bit definition for USB_OTG_DIEPINT register  ********************/
+#define USB_OTG_DIEPINT_XFRC                    ((uint32_t)0x00000001)            /*!< Transfer completed interrupt */
+#define USB_OTG_DIEPINT_EPDISD                  ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt */
+#define USB_OTG_DIEPINT_TOC                     ((uint32_t)0x00000008)            /*!< Timeout condition */
+#define USB_OTG_DIEPINT_ITTXFE                  ((uint32_t)0x00000010)            /*!< IN token received when TxFIFO is empty */
+#define USB_OTG_DIEPINT_INEPNE                  ((uint32_t)0x00000040)            /*!< IN endpoint NAK effective */
+#define USB_OTG_DIEPINT_TXFE                    ((uint32_t)0x00000080)            /*!< Transmit FIFO empty */
+#define USB_OTG_DIEPINT_TXFIFOUDRN              ((uint32_t)0x00000100)            /*!< Transmit Fifo Underrun */
+#define USB_OTG_DIEPINT_BNA                     ((uint32_t)0x00000200)            /*!< Buffer not available interrupt */
+#define USB_OTG_DIEPINT_PKTDRPSTS               ((uint32_t)0x00000800)            /*!< Packet dropped status */
+#define USB_OTG_DIEPINT_BERR                    ((uint32_t)0x00001000)            /*!< Babble error interrupt */
+#define USB_OTG_DIEPINT_NAK                     ((uint32_t)0x00002000)            /*!< NAK interrupt */
+
+/********************  Bit definition for USB_OTG_HCINTMSK register  ********************/
+#define USB_OTG_HCINTMSK_XFRCM                   ((uint32_t)0x00000001)            /*!< Transfer completed mask */
+#define USB_OTG_HCINTMSK_CHHM                    ((uint32_t)0x00000002)            /*!< Channel halted mask */
+#define USB_OTG_HCINTMSK_AHBERR                  ((uint32_t)0x00000004)            /*!< AHB error */
+#define USB_OTG_HCINTMSK_STALLM                  ((uint32_t)0x00000008)            /*!< STALL response received interrupt mask */
+#define USB_OTG_HCINTMSK_NAKM                    ((uint32_t)0x00000010)            /*!< NAK response received interrupt mask */
+#define USB_OTG_HCINTMSK_ACKM                    ((uint32_t)0x00000020)            /*!< ACK response received/transmitted interrupt mask */
+#define USB_OTG_HCINTMSK_NYET                    ((uint32_t)0x00000040)            /*!< response received interrupt mask */
+#define USB_OTG_HCINTMSK_TXERRM                  ((uint32_t)0x00000080)            /*!< Transaction error mask */
+#define USB_OTG_HCINTMSK_BBERRM                  ((uint32_t)0x00000100)            /*!< Babble error mask */
+#define USB_OTG_HCINTMSK_FRMORM                  ((uint32_t)0x00000200)            /*!< Frame overrun mask */
+#define USB_OTG_HCINTMSK_DTERRM                  ((uint32_t)0x00000400)            /*!< Data toggle error mask */
+
+/********************  Bit definition for USB_OTG_DIEPTSIZ register  ********************/
+
+#define USB_OTG_DIEPTSIZ_XFRSIZ                  ((uint32_t)0x0007FFFF)            /*!< Transfer size */
+#define USB_OTG_DIEPTSIZ_PKTCNT                  ((uint32_t)0x1FF80000)            /*!< Packet count */
+#define USB_OTG_DIEPTSIZ_MULCNT                  ((uint32_t)0x60000000)            /*!< Packet count */
+/********************  Bit definition for USB_OTG_HCTSIZ register  ********************/
+#define USB_OTG_HCTSIZ_XFRSIZ                    ((uint32_t)0x0007FFFF)            /*!< Transfer size */
+#define USB_OTG_HCTSIZ_PKTCNT                    ((uint32_t)0x1FF80000)            /*!< Packet count */
+#define USB_OTG_HCTSIZ_DOPING                    ((uint32_t)0x80000000)            /*!< Do PING */
+#define USB_OTG_HCTSIZ_DPID                      ((uint32_t)0x60000000)            /*!< Data PID */
+#define USB_OTG_HCTSIZ_DPID_0                    ((uint32_t)0x20000000)            /*!<Bit 0 */
+#define USB_OTG_HCTSIZ_DPID_1                    ((uint32_t)0x40000000)            /*!<Bit 1 */
+
+/********************  Bit definition for USB_OTG_DIEPDMA register  ********************/
+#define USB_OTG_DIEPDMA_DMAADDR                  ((uint32_t)0xFFFFFFFF)            /*!< DMA address */
+
+/********************  Bit definition for USB_OTG_HCDMA register  ********************/
+#define USB_OTG_HCDMA_DMAADDR                    ((uint32_t)0xFFFFFFFF)            /*!< DMA address */
+
+/********************  Bit definition for USB_OTG_DTXFSTS register  ********************/
+#define USB_OTG_DTXFSTS_INEPTFSAV                ((uint32_t)0x0000FFFF)            /*!< IN endpoint TxFIFO space available */
+
+/********************  Bit definition for USB_OTG_DIEPTXF register  ********************/
+#define USB_OTG_DIEPTXF_INEPTXSA                 ((uint32_t)0x0000FFFF)            /*!< IN endpoint FIFOx transmit RAM start address */
+#define USB_OTG_DIEPTXF_INEPTXFD                 ((uint32_t)0xFFFF0000)            /*!< IN endpoint TxFIFO depth */
+
+/********************  Bit definition for USB_OTG_DOEPCTL register  ********************/
+#define USB_OTG_DOEPCTL_MPSIZ                     ((uint32_t)0x000007FF)            /*!< Maximum packet size */          /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_USBAEP                    ((uint32_t)0x00008000)            /*!< USB active endpoint */
+#define USB_OTG_DOEPCTL_NAKSTS                    ((uint32_t)0x00020000)            /*!< NAK status */
+#define USB_OTG_DOEPCTL_SD0PID_SEVNFRM            ((uint32_t)0x10000000)            /*!< Set DATA0 PID */
+#define USB_OTG_DOEPCTL_SODDFRM                   ((uint32_t)0x20000000)            /*!< Set odd frame */
+#define USB_OTG_DOEPCTL_EPTYP                     ((uint32_t)0x000C0000)            /*!< Endpoint type */
+#define USB_OTG_DOEPCTL_EPTYP_0                   ((uint32_t)0x00040000)            /*!<Bit 0 */
+#define USB_OTG_DOEPCTL_EPTYP_1                   ((uint32_t)0x00080000)            /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_SNPM                      ((uint32_t)0x00100000)            /*!< Snoop mode */
+#define USB_OTG_DOEPCTL_STALL                     ((uint32_t)0x00200000)            /*!< STALL handshake */
+#define USB_OTG_DOEPCTL_CNAK                      ((uint32_t)0x04000000)            /*!< Clear NAK */
+#define USB_OTG_DOEPCTL_SNAK                      ((uint32_t)0x08000000)            /*!< Set NAK */
+#define USB_OTG_DOEPCTL_EPDIS                     ((uint32_t)0x40000000)            /*!< Endpoint disable */
+#define USB_OTG_DOEPCTL_EPENA                     ((uint32_t)0x80000000)            /*!< Endpoint enable */
+
+/********************  Bit definition for USB_OTG_DOEPINT register  ********************/
+#define USB_OTG_DOEPINT_XFRC                    ((uint32_t)0x00000001)            /*!< Transfer completed interrupt */
+#define USB_OTG_DOEPINT_EPDISD                  ((uint32_t)0x00000002)            /*!< Endpoint disabled interrupt */
+#define USB_OTG_DOEPINT_STUP                    ((uint32_t)0x00000008)            /*!< SETUP phase done */
+#define USB_OTG_DOEPINT_OTEPDIS                 ((uint32_t)0x00000010)            /*!< OUT token received when endpoint disabled */
+#define USB_OTG_DOEPINT_OTEPSPR                 ((uint32_t)0x00000020)            /*!< Status Phase Received For Control Write */
+#define USB_OTG_DOEPINT_B2BSTUP                 ((uint32_t)0x00000040)            /*!< Back-to-back SETUP packets received */
+#define USB_OTG_DOEPINT_NYET                    ((uint32_t)0x00004000)            /*!< NYET interrupt */
+
+/********************  Bit definition for USB_OTG_DOEPTSIZ register  ********************/
+#define USB_OTG_DOEPTSIZ_XFRSIZ                  ((uint32_t)0x0007FFFF)            /*!< Transfer size */
+#define USB_OTG_DOEPTSIZ_PKTCNT                  ((uint32_t)0x1FF80000)            /*!< Packet count */
+
+#define USB_OTG_DOEPTSIZ_STUPCNT                 ((uint32_t)0x60000000)            /*!< SETUP packet count */
+#define USB_OTG_DOEPTSIZ_STUPCNT_0               ((uint32_t)0x20000000)            /*!<Bit 0 */
+#define USB_OTG_DOEPTSIZ_STUPCNT_1               ((uint32_t)0x40000000)            /*!<Bit 1 */
+
+/********************  Bit definition for PCGCCTL register  ********************/
+#define USB_OTG_PCGCCTL_STOPCLK                 ((uint32_t)0x00000001)            /*!< SETUP packet count */
+#define USB_OTG_PCGCCTL_GATECLK                 ((uint32_t)0x00000002)            /*!<Bit 0 */
+#define USB_OTG_PCGCCTL_PHYSUSP                 ((uint32_t)0x00000010)            /*!<Bit 1 */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+
+/******************************* ADC Instances ********************************/
+#define IS_ADC_ALL_INSTANCE(__INSTANCE__) (((__INSTANCE__) == ADC1) || \
+                                       ((__INSTANCE__) == ADC2) || \
+                                       ((__INSTANCE__) == ADC3))
+
+/******************************* CAN Instances ********************************/
+#define IS_CAN_ALL_INSTANCE(__INSTANCE__) (((__INSTANCE__) == CAN1) || \
+                                       ((__INSTANCE__) == CAN2))
+ 
+/******************************* CRC Instances ********************************/
+#define IS_CRC_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == CRC)
+
+/******************************* DAC Instances ********************************/
+#define IS_DAC_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == DAC)
+
+/******************************* DCMI Instances *******************************/
+#define IS_DCMI_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == DCMI)
+
+
+/******************************* DMA2D Instances *******************************/
+#define IS_DMA2D_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == DMA2D)
+
+/******************************** DMA Instances *******************************/
+#define IS_DMA_STREAM_ALL_INSTANCE(__INSTANCE__) (((__INSTANCE__) == DMA1_Stream0) || \
+                                              ((__INSTANCE__) == DMA1_Stream1) || \
+                                              ((__INSTANCE__) == DMA1_Stream2) || \
+                                              ((__INSTANCE__) == DMA1_Stream3) || \
+                                              ((__INSTANCE__) == DMA1_Stream4) || \
+                                              ((__INSTANCE__) == DMA1_Stream5) || \
+                                              ((__INSTANCE__) == DMA1_Stream6) || \
+                                              ((__INSTANCE__) == DMA1_Stream7) || \
+                                              ((__INSTANCE__) == DMA2_Stream0) || \
+                                              ((__INSTANCE__) == DMA2_Stream1) || \
+                                              ((__INSTANCE__) == DMA2_Stream2) || \
+                                              ((__INSTANCE__) == DMA2_Stream3) || \
+                                              ((__INSTANCE__) == DMA2_Stream4) || \
+                                              ((__INSTANCE__) == DMA2_Stream5) || \
+                                              ((__INSTANCE__) == DMA2_Stream6) || \
+                                              ((__INSTANCE__) == DMA2_Stream7))
+
+/******************************* GPIO Instances *******************************/
+#define IS_GPIO_ALL_INSTANCE(__INSTANCE__) (((__INSTANCE__) == GPIOA) || \
+                                        ((__INSTANCE__) == GPIOB) || \
+                                        ((__INSTANCE__) == GPIOC) || \
+                                        ((__INSTANCE__) == GPIOD) || \
+                                        ((__INSTANCE__) == GPIOE) || \
+                                        ((__INSTANCE__) == GPIOF) || \
+                                        ((__INSTANCE__) == GPIOG) || \
+                                        ((__INSTANCE__) == GPIOH) || \
+                                        ((__INSTANCE__) == GPIOI) || \
+                                        ((__INSTANCE__) == GPIOJ) || \
+                                        ((__INSTANCE__) == GPIOK))
+										
+#define IS_GPIO_AF_INSTANCE(__INSTANCE__)   (((__INSTANCE__) == GPIOA) || \
+                                        ((__INSTANCE__) == GPIOB) || \
+                                        ((__INSTANCE__) == GPIOC) || \
+                                        ((__INSTANCE__) == GPIOD) || \
+                                        ((__INSTANCE__) == GPIOE) || \
+                                        ((__INSTANCE__) == GPIOF) || \
+                                        ((__INSTANCE__) == GPIOG) || \
+                                        ((__INSTANCE__) == GPIOH) || \
+                                        ((__INSTANCE__) == GPIOI) || \
+                                        ((__INSTANCE__) == GPIOJ) || \
+                                        ((__INSTANCE__) == GPIOK))
+
+/****************************** CEC Instances *********************************/
+#define IS_CEC_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == CEC)
+
+/****************************** QSPI Instances *********************************/
+#define IS_QSPI_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == QUADSPI)
+
+                                        
+/******************************** I2C Instances *******************************/
+#define IS_I2C_ALL_INSTANCE(__INSTANCE__) (((__INSTANCE__) == I2C1) || \
+                                       ((__INSTANCE__) == I2C2) || \
+                                       ((__INSTANCE__) == I2C3) || \
+                                       ((__INSTANCE__) == I2C4))
+
+/******************************** I2S Instances *******************************/
+#define IS_I2S_ALL_INSTANCE(__INSTANCE__)  (((__INSTANCE__) == SPI1) || \
+                                    ((__INSTANCE__) == SPI2) || \
+                                    ((__INSTANCE__) == SPI3))
+
+/******************************* LPTIM Instances ********************************/
+#define IS_LPTIM_INSTANCE(__INSTANCE__) ((__INSTANCE__) == LPTIM1)
+
+/****************************** LTDC Instances ********************************/
+#define IS_LTDC_ALL_INSTANCE(__INSTANCE__)  ((__INSTANCE__) == LTDC)
+
+
+/******************************* RNG Instances ********************************/
+#define IS_RNG_ALL_INSTANCE(__INSTANCE__)  ((__INSTANCE__) == RNG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(__INSTANCE__)  ((__INSTANCE__) == RTC)
+
+/******************************* SAI Instances ********************************/
+#define IS_SAI_BLOCK_PERIPH(__PERIPH__) (((__PERIPH__) == SAI1_Block_A) || \
+                                     ((__PERIPH__) == SAI1_Block_B) || \
+                                     ((__PERIPH__) == SAI2_Block_A) || \
+                                     ((__PERIPH__) == SAI2_Block_B))
+
+
+/******************************** SDMMC Instances *******************************/
+#define IS_SDMMC_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == SDMMC1)
+
+/****************************** SPDIFRX Instances *********************************/
+#define IS_SPDIFRX_ALL_INSTANCE(__INSTANCE__) ((__INSTANCE__) == SPDIFRX)
+                                     
+/******************************** SPI Instances *******************************/
+#define IS_SPI_ALL_INSTANCE(__INSTANCE__) (((__INSTANCE__) == SPI1) || \
+                                       ((__INSTANCE__) == SPI2) || \
+                                       ((__INSTANCE__) == SPI3) || \
+                                       ((__INSTANCE__) == SPI4) || \
+                                       ((__INSTANCE__) == SPI5) || \
+                                       ((__INSTANCE__) == SPI6))
+
+/****************** TIM Instances : All supported instances *******************/
+#define IS_TIM_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1)   || \
+                                   ((__INSTANCE__) == TIM2)   || \
+                                   ((__INSTANCE__) == TIM3)   || \
+                                   ((__INSTANCE__) == TIM4)   || \
+                                   ((__INSTANCE__) == TIM5)   || \
+                                   ((__INSTANCE__) == TIM6)   || \
+                                   ((__INSTANCE__) == TIM7)   || \
+                                   ((__INSTANCE__) == TIM8)   || \
+                                   ((__INSTANCE__) == TIM9)   || \
+                                   ((__INSTANCE__) == TIM10)  || \
+                                   ((__INSTANCE__) == TIM11)  || \
+                                   ((__INSTANCE__) == TIM12)  || \
+                                   ((__INSTANCE__) == TIM13)  || \
+                                   ((__INSTANCE__) == TIM14))
+
+/************* TIM Instances : at least 1 capture/compare channel *************/
+#define IS_TIM_CC1_INSTANCE(__INSTANCE__)   (((__INSTANCE__) == TIM1)  || \
+                                         ((__INSTANCE__) == TIM2)  || \
+                                         ((__INSTANCE__) == TIM3)  || \
+                                         ((__INSTANCE__) == TIM4)  || \
+                                         ((__INSTANCE__) == TIM5)  || \
+                                         ((__INSTANCE__) == TIM8)  || \
+                                         ((__INSTANCE__) == TIM9)  || \
+                                         ((__INSTANCE__) == TIM10) || \
+                                         ((__INSTANCE__) == TIM11) || \
+                                         ((__INSTANCE__) == TIM12) || \
+                                         ((__INSTANCE__) == TIM13) || \
+                                         ((__INSTANCE__) == TIM14))
+
+/************ TIM Instances : at least 2 capture/compare channels *************/
+#define IS_TIM_CC2_INSTANCE(__INSTANCE__)   (((__INSTANCE__) == TIM1)  || \
+                                         ((__INSTANCE__) == TIM2)  || \
+                                         ((__INSTANCE__) == TIM3)  || \
+                                         ((__INSTANCE__) == TIM4)  || \
+                                         ((__INSTANCE__) == TIM5)  || \
+                                         ((__INSTANCE__) == TIM8)  || \
+                                         ((__INSTANCE__) == TIM9)  || \
+                                         ((__INSTANCE__) == TIM12))
+
+/************ TIM Instances : at least 3 capture/compare channels *************/
+#define IS_TIM_CC3_INSTANCE(__INSTANCE__)   (((__INSTANCE__) == TIM1) || \
+                                         ((__INSTANCE__) == TIM2) || \
+                                         ((__INSTANCE__) == TIM3) || \
+                                         ((__INSTANCE__) == TIM4) || \
+                                         ((__INSTANCE__) == TIM5) || \
+                                         ((__INSTANCE__) == TIM8))
+
+/************ TIM Instances : at least 4 capture/compare channels *************/
+#define IS_TIM_CC4_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
+                                       ((__INSTANCE__) == TIM2) || \
+                                       ((__INSTANCE__) == TIM3) || \
+                                       ((__INSTANCE__) == TIM4) || \
+                                       ((__INSTANCE__) == TIM5) || \
+                                       ((__INSTANCE__) == TIM8))
+                                       
+/****************** TIM Instances : supporting combined 3-phase PWM mode ******/
+#define IS_TIM_COMBINED3PHASEPWM_INSTANCE(__INSTANCE__) \
+                                       (((__INSTANCE__) == TIM1)    || \
+                                        ((__INSTANCE__) == TIM8))
+
+/****************** TIM Instances : supporting OCxREF clear *******************/
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(__INSTANCE__)\
+                                  (((__INSTANCE__) == TIM1)    || \
+                                   ((__INSTANCE__) == TIM2)    || \
+                                   ((__INSTANCE__) == TIM3)    || \
+                                   ((__INSTANCE__) == TIM4)    || \
+                                   ((__INSTANCE__) == TIM8))
+
+/****************** TIM Instances : supporting external clock mode 1 for TIX inputs*/
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(__INSTANCE__)\
+                                                 (((__INSTANCE__) == TIM1)    || \
+                                                  ((__INSTANCE__) == TIM2)    || \
+                                                  ((__INSTANCE__) == TIM3)    || \
+                                                  ((__INSTANCE__) == TIM4)    || \
+                                                  ((__INSTANCE__) == TIM5)    || \
+                                                  ((__INSTANCE__) == TIM8))
+ 
+/****************** TIM Instances : supporting internal trigger inputs(ITRX) *******/
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(__INSTANCE__)\
+                                                   (((__INSTANCE__) == TIM1)    || \
+                                                    ((__INSTANCE__) == TIM2)    || \
+                                                    ((__INSTANCE__) == TIM3)    || \
+                                                    ((__INSTANCE__) == TIM4)    || \
+                                                    ((__INSTANCE__) == TIM5)    || \
+                                                    ((__INSTANCE__) == TIM8))
+/****************** TIM Instances : at least 5 capture/compare channels *******/
+#define IS_TIM_CC5_INSTANCE(__INSTANCE__)\
+  (((__INSTANCE__) == TIM1)    || \
+   ((__INSTANCE__) == TIM8) )
+
+/****************** TIM Instances : at least 6 capture/compare channels *******/
+#define IS_TIM_CC6_INSTANCE(__INSTANCE__)\
+  (((__INSTANCE__) == TIM1)    || \
+   ((__INSTANCE__) == TIM8))
+
+                                       
+/******************** TIM Instances : Advanced-control timers *****************/
+#define IS_TIM_ADVANCED_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
+                                            ((__INSTANCE__) == TIM8))
+
+/****************** TIM Instances : supporting 2 break inputs *****************/
+#define IS_TIM_BREAK_INSTANCE(__INSTANCE__)\
+  (((__INSTANCE__) == TIM1)    || \
+   ((__INSTANCE__) == TIM8))
+   
+/******************* TIM Instances : Timer input XOR function *****************/
+#define IS_TIM_XOR_INSTANCE(__INSTANCE__)   (((__INSTANCE__) == TIM1) || \
+                                         ((__INSTANCE__) == TIM2) || \
+                                         ((__INSTANCE__) == TIM3) || \
+                                         ((__INSTANCE__) == TIM4) || \
+                                         ((__INSTANCE__) == TIM5) || \
+                                         ((__INSTANCE__) == TIM8))
+
+/****************** TIM Instances : DMA requests generation (UDE) *************/
+#define IS_TIM_DMA_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
+                                       ((__INSTANCE__) == TIM2) || \
+                                       ((__INSTANCE__) == TIM3) || \
+                                       ((__INSTANCE__) == TIM4) || \
+                                       ((__INSTANCE__) == TIM5) || \
+                                       ((__INSTANCE__) == TIM6) || \
+                                       ((__INSTANCE__) == TIM7) || \
+                                       ((__INSTANCE__) == TIM8))
+
+/************ TIM Instances : DMA requests generation (CCxDE) *****************/
+#define IS_TIM_DMA_CC_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
+                                          ((__INSTANCE__) == TIM2) || \
+                                          ((__INSTANCE__) == TIM3) || \
+                                          ((__INSTANCE__) == TIM4) || \
+                                          ((__INSTANCE__) == TIM5) || \
+                                          ((__INSTANCE__) == TIM8))
+
+/************ TIM Instances : DMA requests generation (COMDE) *****************/
+#define IS_TIM_CCDMA_INSTANCE(__INSTANCE__)  (((__INSTANCE__) == TIM1) || \
+                                          ((__INSTANCE__) == TIM2) || \
+                                          ((__INSTANCE__) == TIM3) || \
+                                          ((__INSTANCE__) == TIM4) || \
+                                          ((__INSTANCE__) == TIM5) || \
+                                          ((__INSTANCE__) == TIM8)) 
+
+/******************** TIM Instances : DMA burst feature ***********************/
+#define IS_TIM_DMABURST_INSTANCE(__INSTANCE__)  (((__INSTANCE__) == TIM1) || \
+                                             ((__INSTANCE__) == TIM2) || \
+                                             ((__INSTANCE__) == TIM3) || \
+                                             ((__INSTANCE__) == TIM4) || \
+                                             ((__INSTANCE__) == TIM5) || \
+                                             ((__INSTANCE__) == TIM8))
+
+/****** TIM Instances : master mode available (TIMx_CR2.MMS available )********/
+#define IS_TIM_MASTER_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
+                                          ((__INSTANCE__) == TIM2) || \
+                                          ((__INSTANCE__) == TIM3) || \
+                                          ((__INSTANCE__) == TIM4) || \
+                                          ((__INSTANCE__) == TIM5) || \
+                                          ((__INSTANCE__) == TIM6) || \
+                                          ((__INSTANCE__) == TIM7) || \
+                                          ((__INSTANCE__) == TIM8) || \
+                                          ((__INSTANCE__) == TIM13) || \
+                                          ((__INSTANCE__) == TIM14))
+
+/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/
+#define IS_TIM_SLAVE_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM1) || \
+                                         ((__INSTANCE__) == TIM2) || \
+                                         ((__INSTANCE__) == TIM3) || \
+                                         ((__INSTANCE__) == TIM4) || \
+                                         ((__INSTANCE__) == TIM5) || \
+                                         ((__INSTANCE__) == TIM8) || \
+                                         ((__INSTANCE__) == TIM9) || \
+                                         ((__INSTANCE__) == TIM12))
+
+/********************** TIM Instances : 32 bit Counter ************************/
+#define IS_TIM_32B_COUNTER_INSTANCE(__INSTANCE__)(((__INSTANCE__) == TIM2) || \
+                                              ((__INSTANCE__) == TIM5))
+
+/***************** TIM Instances : external trigger input available ************/
+#define IS_TIM_ETR_INSTANCE(__INSTANCE__)  (((__INSTANCE__) == TIM1) || \
+                                        ((__INSTANCE__) == TIM2) || \
+                                        ((__INSTANCE__) == TIM3) || \
+                                        ((__INSTANCE__) == TIM4) || \
+                                        ((__INSTANCE__) == TIM5) || \
+                                        ((__INSTANCE__) == TIM8))
+
+/****************** TIM Instances : remapping capability **********************/
+#define IS_TIM_REMAP_INSTANCE(__INSTANCE__) (((__INSTANCE__) == TIM2)  || \
+                                         ((__INSTANCE__) == TIM5)  || \
+                                         ((__INSTANCE__) == TIM11))
+
+/******************* TIM Instances : output(s) available **********************/
+#define IS_TIM_CCX_INSTANCE(__INSTANCE__, __CHANNEL__) \
+    ((((__INSTANCE__) == TIM1) &&                  \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_3) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM2) &&                   \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_3) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM3) &&                   \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_3) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM4) &&                   \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_3) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM5) &&                   \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_3) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM8) &&                   \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_3) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_4)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM9) &&                   \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM10) &&                  \
+     (((__CHANNEL__) == TIM_CHANNEL_1)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM11) &&                  \
+     (((__CHANNEL__) == TIM_CHANNEL_1)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM12) &&                  \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||          \
+      ((__CHANNEL__) == TIM_CHANNEL_2)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM13) &&                  \
+     (((__CHANNEL__) == TIM_CHANNEL_1)))           \
+    ||                                         \
+    (((__INSTANCE__) == TIM14) &&                  \
+     (((__CHANNEL__) == TIM_CHANNEL_1))))
+
+/************ TIM Instances : complementary output(s) available ***************/
+#define IS_TIM_CCXN_INSTANCE(__INSTANCE__, __CHANNEL__) \
+   ((((__INSTANCE__) == TIM1) &&                    \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||           \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||           \
+      ((__CHANNEL__) == TIM_CHANNEL_3)))            \
+    ||                                          \
+    (((__INSTANCE__) == TIM8) &&                    \
+     (((__CHANNEL__) == TIM_CHANNEL_1) ||           \
+      ((__CHANNEL__) == TIM_CHANNEL_2) ||           \
+      ((__CHANNEL__) == TIM_CHANNEL_3))))
+
+/****************** TIM Instances : supporting ADC triggering through TRGO2 ***/
+#define IS_TIM_TRGO2_INSTANCE(__INSTANCE__)\
+  (((__INSTANCE__) == TIM1)    || \
+   ((__INSTANCE__) == TIM8) )
+
+/****************** TIM Instances : supporting synchronization ****************/
+#define IS_TIM_SYNCHRO_INSTANCE(__INSTANCE__)\
+    (((__INSTANCE__) == TIM1)    || \
+     ((__INSTANCE__) == TIM2)    || \
+     ((__INSTANCE__) == TIM3)    || \
+     ((__INSTANCE__) == TIM4)    || \
+     ((__INSTANCE__) == TIM5)    || \
+     ((__INSTANCE__) == TIM6)    || \
+     ((__INSTANCE__) == TIM7)    || \
+     ((__INSTANCE__) == TIM8))  
+      
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(__INSTANCE__) (((__INSTANCE__) == USART1) || \
+                                     ((__INSTANCE__) == USART2) || \
+                                     ((__INSTANCE__) == USART3) || \
+                                     ((__INSTANCE__) == USART6))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(__INSTANCE__) (((__INSTANCE__) == USART1) || \
+                                    ((__INSTANCE__) == USART2) || \
+                                    ((__INSTANCE__) == USART3) || \
+                                    ((__INSTANCE__) == UART4)  || \
+                                    ((__INSTANCE__) == UART5)  || \
+                                    ((__INSTANCE__) == USART6) || \
+                                    ((__INSTANCE__) == UART7)  || \
+                                    ((__INSTANCE__) == UART8))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(__INSTANCE__) (((__INSTANCE__) == USART1) || \
+                                    ((__INSTANCE__) == USART2) || \
+                                    ((__INSTANCE__) == USART3) || \
+                                    ((__INSTANCE__) == UART4)  || \
+                                    ((__INSTANCE__) == UART5)  || \
+                                    ((__INSTANCE__) == USART6) || \
+                                    ((__INSTANCE__) == UART7)  || \
+                                    ((__INSTANCE__) == UART8))
+
+/********************* UART Instances : Smart card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(__INSTANCE__) (((__INSTANCE__) == USART1) || \
+                                         ((__INSTANCE__) == USART2) || \
+                                         ((__INSTANCE__) == USART3) || \
+                                         ((__INSTANCE__) == USART6))
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(__INSTANCE__) (((__INSTANCE__) == USART1) || \
+                                    ((__INSTANCE__) == USART2) || \
+                                    ((__INSTANCE__) == USART3) || \
+                                    ((__INSTANCE__) == UART4)  || \
+                                    ((__INSTANCE__) == UART5)  || \
+                                    ((__INSTANCE__) == USART6) || \
+                                    ((__INSTANCE__) == UART7)  || \
+                                    ((__INSTANCE__) == UART8))     
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(__INSTANCE__)  ((__INSTANCE__) == IWDG)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(__INSTANCE__)  ((__INSTANCE__) == WWDG)
+
+
+/******************************************************************************/
+/*  For a painless codes migration between the STM32F7xx device product       */
+/*  lines, the aliases defined below are put in place to overcome the         */
+/*  differences in the interrupt handlers and IRQn definitions.               */
+/*  No need to update developed interrupt code when moving across             */
+/*  product lines within the same STM32F7 Family                              */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define HASH_RNG_IRQn              RNG_IRQn
+
+/* Aliases for __IRQHandler */
+#define HASH_RNG_IRQHandler        RNG_IRQHandler
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F746xx_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/stm32f7xx.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,197 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx.h
+  * @author  MCD Application Team
+  * @version V1.0.2
+  * @date    21-September-2015
+  * @brief   CMSIS STM32F7xx Device Peripheral Access Layer Header File.           
+  *            
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The STM32F7xx device used in the target application
+  *              - To use or not the peripheral’s drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral’s registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f7xx
+  * @{
+  */
+    
+#ifndef __STM32F7xx_H
+#define __STM32F7xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+  
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined  (STM32F7)
+#define STM32F7
+#endif /* STM32F7 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+   application 
+  */
+#if !defined (STM32F756xx) && !defined (STM32F746xx) && !defined (STM32F745xx)
+  /* #define STM32F756xx */   /*!< STM32F756VG, STM32F756ZG, STM32F756ZG, STM32F756IG, STM32F756BG,
+                                   STM32F756NG Devices */
+#define STM32F746xx           /*!< STM32F746VE, STM32F746VG, STM32F746ZE, STM32F746ZG, STM32F746IE, STM32F746IG,
+                                   STM32F746BE, STM32F746BG, STM32F746NE, STM32F746NG Devices */
+  /* #define STM32F745xx */   /*!< STM32F745VE, STM32F745VG, STM32F745ZG, STM32F745ZE, STM32F745IE, STM32F745IG Devices */
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V1.0.1
+  */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION_MAIN   (0x01) /*!< [31:24] main version */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION_SUB1   (0x00) /*!< [23:16] sub1 version */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION_SUB2   (0x01) /*!< [15:8]  sub2 version */
+#define __STM32F7xx_CMSIS_DEVICE_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
+#define __STM32F7xx_CMSIS_DEVICE_VERSION        ((__STM32F7xx_CMSIS_DEVICE_VERSION_MAIN << 24)\
+                                                |(__STM32F7xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\
+                                                |(__STM32F7xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\
+                                                |(__STM32F7xx_CMSIS_DEVICE_VERSION))
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+#if defined(STM32F756xx)
+  #include "stm32f756xx.h"
+#elif defined(STM32F746xx)
+  #include "stm32f746xx.h"
+#elif defined(STM32F745xx)
+  #include "stm32f745xx.h"
+#else
+ #error "Please select first the target STM32F7xx device used in your application (in stm32f7xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */ 
+typedef enum 
+{
+  RESET = 0, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum 
+{
+  ERROR = 0, 
+  SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+  * @}
+  */
+  
+/** @addtogroup Exported_macro
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
+
+/**
+  * @}
+  */
+
+#ifdef USE_HAL_DRIVER
+  #include "stm32f7xx_hal_conf.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F7xx_H */
+
+/**
+  * @}
+  */
+
+  /**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/stm32f7xx_hal_conf.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,421 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   HAL configuration template file. 
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f7xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CONF_H
+#define __STM32F7xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED  
+#define HAL_ADC_MODULE_ENABLED  
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED  
+#define HAL_CRC_MODULE_ENABLED  
+#define HAL_CRYP_MODULE_ENABLED  
+#define HAL_DAC_MODULE_ENABLED  
+#define HAL_DCMI_MODULE_ENABLED 
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED 
+#define HAL_ETH_MODULE_ENABLED 
+#define HAL_FLASH_MODULE_ENABLED 
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED  
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED   
+#define HAL_IWDG_MODULE_ENABLED 
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED 
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED   
+#define HAL_RCC_MODULE_ENABLED 
+#define HAL_RNG_MODULE_ENABLED   
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED   
+#define HAL_SD_MODULE_ENABLED  
+#define HAL_SPDIFRX_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED   
+#define HAL_TIM_MODULE_ENABLED   
+#define HAL_UART_MODULE_ENABLED 
+#define HAL_USART_MODULE_ENABLED 
+#define HAL_IRDA_MODULE_ENABLED 
+#define HAL_SMARTCARD_MODULE_ENABLED 
+#define HAL_WWDG_MODULE_ENABLED  
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)200)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE) 
+ #define LSI_VALUE  ((uint32_t)32000)       /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  ((uint32_t)32768)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source 
+  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE                    ((uint32_t)3300) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            ((uint32_t)0x0F) /*!< tick interrupt priority */
+#define  USE_RTOS                     0
+#define  PREFETCH_ENABLE              1
+#define  ART_ACCLERATOR_ENABLE        1 /* To enable instruction cache and prefetch */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1 */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2
+#define MAC_ADDR1   0
+#define MAC_ADDR2   0
+#define MAC_ADDR3   0
+#define MAC_ADDR4   0
+#define MAC_ADDR5   0
+
+/* Definition of the Ethernet driver buffers size and count */   
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    ((uint32_t)4)       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    ((uint32_t)4)       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/ 
+#define DP83848_PHY_ADDRESS             0x01
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ 
+#define PHY_RESET_DELAY                 ((uint32_t)0x000000FF)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                ((uint32_t)0x00000FFF)
+
+#define PHY_READ_TO                     ((uint32_t)0x0000FFFF)
+#define PHY_WRITE_TO                    ((uint32_t)0x0000FFFF)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x00)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x01)    /*!< Transceiver Basic Status Register    */
+ 
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+  
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x10)    /*!< PHY status register Offset                      */
+#define PHY_MICR                        ((uint16_t)0x11)    /*!< MII Interrupt Control Register                  */
+#define PHY_MISR                        ((uint16_t)0x12)    /*!< MII Interrupt Status and Misc. Control Register */
+ 
+#define PHY_LINK_STATUS                 ((uint16_t)0x0001)  /*!< PHY Link mask                                   */
+#define PHY_SPEED_STATUS                ((uint16_t)0x0002)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0004)  /*!< PHY Duplex mask                                 */
+
+#define PHY_MICR_INT_EN                 ((uint16_t)0x0002)  /*!< PHY Enable interrupts                           */
+#define PHY_MICR_INT_OE                 ((uint16_t)0x0001)  /*!< PHY Enable output interrupt events              */
+
+#define PHY_MISR_LINK_INT_EN            ((uint16_t)0x0020)  /*!< Enable Interrupt on change of link status       */
+#define PHY_LINK_INTERRUPT              ((uint16_t)0x2000)  /*!< PHY link status interrupt mask                  */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f7xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f7xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f7xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+   
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f7xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f7xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f7xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+  #include "stm32f7xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f7xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f7xx_hal_cryp.h" 
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f7xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f7xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f7xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f7xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f7xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+ 
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f7xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f7xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f7xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f7xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */      
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f7xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f7xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f7xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f7xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f7xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f7xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f7xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f7xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f7xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f7xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f7xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f7xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f7xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f7xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f7xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f7xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f7xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f7xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f7xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f7xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f7xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f7xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+   
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CONF_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/system_stm32f7xx.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,851 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f7xx.c
+  * @author  MCD Application Team
+  * @version V1.0.2
+  * @date    21-September-2015
+  * @brief   CMSIS Cortex-M7 Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from 
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f7xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * This file configures the system clock as follows:
+  *-----------------------------------------------------------------------------
+  * System clock source       | [1] PLL_HSE_XTAL      | [2] PLL_HSI if [1] fails
+  *                           | (external 25MHz xtal) | (internal 16MHz clock)
+  *-----------------------------------------------------------------------------
+  * SYSCLK(MHz)               | 216                   | 216
+  *-----------------------------------------------------------------------------
+  * AHBCLK (MHz)              | 216                   | 216
+  *-----------------------------------------------------------------------------
+  * APB1CLK (MHz)             |  54                   |  54
+  *-----------------------------------------------------------------------------
+  * APB2CLK (MHz)             | 108                   | 108
+  *-----------------------------------------------------------------------------
+  * USB capable               | YES                   |  NO
+  * with 48 MHz precise clock |                       |
+  *-----------------------------------------------------------------------------  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f7xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F7xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f7xx.h"
+#include "hal_tick.h"
+
+HAL_StatusTypeDef HAL_Init(void);
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM mounted
+     on STMicroelectronics EVAL/Discovery boards as data memory  */
+/*!< In case of EVAL/Discovery’s LCD use in application code, the DATA_IN_ExtSDRAM define
+     need to be added  in the project preprocessor to avoid SDRAM multiple configuration
+     (the LCD uses SDRAM as frame buffer, and its configuration is done by the BSP_SDRAM_Init()) */
+/* #define DATA_IN_ExtSRAM */ 
+/* #define DATA_IN_ExtSDRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field. 
+                                   This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Private_Macros
+  * @{
+  */
+
+/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */
+#define USE_PLL_HSE_EXTC (1) /* Use external clock */ 
+#define USE_PLL_HSE_XTAL (1) /* Use external xtal */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Private_Variables
+  * @{
+  */
+
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+uint32_t SystemCoreClock = HSI_VALUE;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Private_FunctionPrototypes
+  * @{
+  */
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass);
+#endif
+
+uint8_t SetSysClock_PLL_HSI(void);
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemFrequency variable.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+  /* Reset the RCC clock configuration to the default reset state ------------*/
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset CFGR register */
+  RCC->CFGR = 0x00000000;
+
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset PLLCFGR register */
+  RCC->PLLCFGR = 0x24003010;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Disable all interrupts */
+  RCC->CIR = 0x00000000;
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  SystemInit_ExtMemCtl(); 
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = RAMDTCM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+
+  /* Configure the Cube driver */
+  SystemCoreClock = HSI_VALUE; // At this stage the HSI is used as system clock
+  HAL_Init();
+
+  // Enable CPU L1-Cache
+  SCB_EnableICache();
+  SCB_EnableDCache();
+
+  /* Configure the System clock source, PLL Multiplier and Divider factors,
+     AHB/APBx prescalers and Flash settings */
+  SetSysClock();
+  
+  /* Reset the timer to avoid issues after the RAM initialization */
+  TIM_MST_RESET_ON;
+  TIM_MST_RESET_OFF;  
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f7xx.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f7xx.h file (default value
+  *              25 MHz), user has to ensure that HSE_VALUE is same as the real
+  *              frequency of the crystal used. Otherwise, this function may
+  *              have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *     
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+  
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock source */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock source */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock source */
+
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+         SYSCLK = PLL_VCO / PLL_P
+         */    
+      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      
+      if (pllsource != 0)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);      
+      }
+
+      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+      SystemCoreClock = pllvco/pllp;
+      break;
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK frequency --------------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK frequency */
+  SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f7xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0;
+#if defined (DATA_IN_ExtSDRAM) && defined (DATA_IN_ExtSRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register uint32_t index;
+
+  /* Enable GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface 
+      clock */
+  RCC->AHB1ENR |= 0x000001F8;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;  
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x55550545;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 50 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x55554145;  
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCC000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xFF800FFF;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x55400555;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CC00CC;
+  GPIOG->AFR[1]  = 0xC00000CC;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x80220AAA;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0x80320FFF;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x40110555;
+
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x55550450;
+
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00145555;
+
+/*-- FMC Configuration ------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[4]  = 0x00001091;
+  FMC_Bank1->BTCR[5]  = 0x00110212;
+  FMC_Bank1E->BWTR[4] = 0x0FFFFFFF;
+
+  /* Configure and enable SDRAM bank1 */
+  FMC_Bank5_6->SDCR[0] = 0x000019E5;
+  FMC_Bank5_6->SDTR[0] = 0x01116361;   
+
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+  FMC_Bank5_6->SDCMR = 0x000000F3;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+  FMC_Bank5_6->SDCMR = 0x00046014;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x00000603<<1));
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);  
+  
+#elif defined (DATA_IN_ExtSDRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register uint32_t index;
+
+  /* Enable GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface 
+      clock */
+  RCC->AHB1ENR |= 0x000001F8;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x000000CC;
+  GPIOD->AFR[1]  = 0xCC000CCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xA02A000A;
+  /* Configure PDx pins speed to 50 MHz */  
+  GPIOD->OSPEEDR = 0xA02A000A;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x50150005;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00000CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA800A;
+  /* Configure PEx pins speed to 50 MHz */ 
+  GPIOE->OSPEEDR = 0xAAAA800A;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x55554005;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCC000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */ 
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x55400555;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CC00CC;
+  GPIOG->AFR[1]  = 0xC000000C;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x80020A0A;
+  /* Configure PGx pins speed to 50 MHz */ 
+  GPIOG->OSPEEDR = 0x80020A0A;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x40010505;
+  
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */ 
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */ 
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */  
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */ 
+  GPIOH->PUPDR   = 0x55550450;
+  
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */ 
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */ 
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */  
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */ 
+  GPIOI->PUPDR   = 0x00145555;
+  
+/*-- FMC Configuration ------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable SDRAM bank1 */
+  FMC_Bank5_6->SDCR[0] = 0x000019E5;
+  FMC_Bank5_6->SDTR[0] = 0x01116361;      
+  
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011; 
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+  
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;           
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+  
+  /* Auto refresh command */
+  FMC_Bank5_6->SDCMR = 0x000000F3;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  }
+ 
+  /* MRD register program */
+  FMC_Bank5_6->SDCMR = 0x00046014;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
+  } 
+  
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x00000603<<1));
+  
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0]; 
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+  
+#elif defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHB1ENR   |= 0x00000078;
+  
+    /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);
+  
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x55550545;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x55554145;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 100 MHz */ 
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x55000555;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x000000C0;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x00200AAA;
+  /* Configure PGx pins speed to 100 MHz */ 
+  GPIOG->OSPEEDR = 0x00300FFF;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00100555;
+  
+/*-- FMC/FSMC Configuration --------------------------------------------------*/                                                                               
+  /* Enable the FMC/FSMC interface clock */
+  RCC->AHB3ENR         |= 0x00000001;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[4]  = 0x00001091;
+  FMC_Bank1->BTCR[5]  = 0x00110212;
+  FMC_Bank1E->BWTR[4] = 0x0FFFFFFF;  
+
+#endif /* DATA_IN_ExtSRAM */
+
+  (void)(tmp);
+}
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+  * @brief  Configures the System clock source, PLL Multiplier and Divider factors,
+  *               AHB/APBx prescalers and Flash settings
+  * @note   This function should be called only once the RCC clock configuration  
+  *         is reset to the default reset state (done in SystemInit() function).             
+  * @param  None
+  * @retval None
+  */
+void SetSysClock(void)
+{
+  /* 1- Try to start with HSE and external clock */
+#if USE_PLL_HSE_EXTC != 0
+  if (SetSysClock_PLL_HSE(1) == 0)
+#endif
+  {
+    /* 2- If fail try to start with HSE and external xtal */
+    #if USE_PLL_HSE_XTAL != 0
+    if (SetSysClock_PLL_HSE(0) == 0)
+    #endif
+    {
+      /* 3- If fail start with HSI clock */
+      if (SetSysClock_PLL_HSI() == 0)
+      {
+        while(1)
+        {
+          // [TODO] Put something here to tell the user that a problem occured...
+        }
+      }
+    }
+  }
+  
+  // Output clock on MCO2 pin(PC9) for debugging purpose
+  // Can be visualized on CN8 connector pin 4
+  //HAL_RCC_MCOConfig(RCC_MCO2, RCC_MCO2SOURCE_SYSCLK, RCC_MCODIV_4); // 216 MHz / 4 = 54 MHz
+}
+
+#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0)
+/******************************************************************************/
+/*            PLL (clocked by HSE) used as System clock source                */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
+{
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+
+  // Enable power clock  
+  __PWR_CLK_ENABLE();
+  
+  // Enable HSE oscillator and activate PLL with HSE as source
+  RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSE;
+  if (bypass == 0)
+  {
+    RCC_OscInitStruct.HSEState          = RCC_HSE_ON; /* External xtal on OSC_IN/OSC_OUT */
+  }
+  else
+  {
+    RCC_OscInitStruct.HSEState          = RCC_HSE_BYPASS; /* External clock on OSC_IN */
+  }
+  // Warning: this configuration is for a 8 MHz xtal clock only
+  RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM            = 8;             // VCO input clock = 1 MHz (8 MHz / 8)
+  RCC_OscInitStruct.PLL.PLLN            = 432;           // VCO output clock = 432 MHz (1 MHz * 432)
+  RCC_OscInitStruct.PLL.PLLP            = RCC_PLLP_DIV2; // PLLCLK = 216 MHz (432 MHz / 2)
+  RCC_OscInitStruct.PLL.PLLQ            = 9;             // USB clock = 48 MHz (432 MHz / 9) --> OK for USB
+  
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    return 0; // FAIL
+  }
+
+  // Activate the OverDrive to reach the 216 MHz Frequency
+  if (HAL_PWREx_EnableOverDrive() != HAL_OK)
+  {
+    return 0; // FAIL
+  }
+  
+  // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
+  RCC_ClkInitStruct.ClockType      = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+  RCC_ClkInitStruct.SYSCLKSource   = RCC_SYSCLKSOURCE_PLLCLK; // 216 MHz
+  RCC_ClkInitStruct.AHBCLKDivider  = RCC_SYSCLK_DIV1;         // 216 MHz
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;           //  54 MHz
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;           // 108 MHz
+  
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK)
+  {
+    return 0; // FAIL
+  }
+
+  return 1; // OK
+}
+#endif
+
+/******************************************************************************/
+/*            PLL (clocked by HSI) used as System clock source                */
+/******************************************************************************/
+uint8_t SetSysClock_PLL_HSI(void)
+{
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+
+  // Enable CPU L1-Cache
+  SCB_EnableICache();
+  SCB_EnableDCache();
+
+  // Enable power clock  
+  __PWR_CLK_ENABLE();
+ 
+  // Enable HSI oscillator and activate PLL with HSI as source
+  RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSIState            = RCC_HSI_ON;
+  RCC_OscInitStruct.HSEState            = RCC_HSE_OFF;
+  RCC_OscInitStruct.HSICalibrationValue = 16;
+  RCC_OscInitStruct.PLL.PLLState        = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource       = RCC_PLLSOURCE_HSI;   
+  RCC_OscInitStruct.PLL.PLLM            = 16;            // VCO input clock = 1 MHz (16 MHz / 16)
+  RCC_OscInitStruct.PLL.PLLN            = 432;           // VCO output clock = 432 MHz (1 MHz * 432)
+  RCC_OscInitStruct.PLL.PLLP            = RCC_PLLP_DIV2; // PLLCLK = 216 MHz (432 MHz / 2)
+  RCC_OscInitStruct.PLL.PLLQ            = 9;             // USB clock = 48 MHz (432 MHz / 9) --> OK for USB
+  
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+  {
+    return 0; // FAIL
+  }
+ 
+  // Activate the OverDrive to reach the 216 MHz Frequency
+  if (HAL_PWREx_EnableOverDrive() != HAL_OK)
+  {
+    return 0; // FAIL
+  }
+  
+  // Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers
+  RCC_ClkInitStruct.ClockType      = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+  RCC_ClkInitStruct.SYSCLKSource   = RCC_SYSCLKSOURCE_PLLCLK; // 216 MHz
+  RCC_ClkInitStruct.AHBCLKDivider  = RCC_SYSCLK_DIV1;         // 216 MHz
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;           //  54 MHz
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;           // 108 MHz
+
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK)
+  {
+    return 0; // FAIL
+  }
+
+  return 1; // OK
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/system_stm32f7xx.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,123 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f7xx.h
+  * @author  MCD Application Team
+  * @version V1.0.2
+  * @date    21-September-2015
+  * @brief   CMSIS Cortex-M7 Device System Source File for STM32F7xx devices.       
+  ******************************************************************************  
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f7xx_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F7XX_H
+#define __SYSTEM_STM32F7XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F7xx_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F7xx_System_Exported_types
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+    */
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F7xx_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F7XX_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32_hal_legacy.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,2948 @@
+/**
+  ******************************************************************************
+  * @file    stm32_hal_legacy.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   This file contains aliases definition for the STM32Cube HAL constants 
+  *          macros and functions maintained for legacy purpose.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_HAL_LEGACY
+#define __STM32_HAL_LEGACY
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define AES_FLAG_RDERR                  CRYP_FLAG_RDERR
+#define AES_FLAG_WRERR                  CRYP_FLAG_WRERR
+#define AES_CLEARFLAG_CCF               CRYP_CLEARFLAG_CCF
+#define AES_CLEARFLAG_RDERR             CRYP_CLEARFLAG_RDERR
+#define AES_CLEARFLAG_WRERR             CRYP_CLEARFLAG_WRERR
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define ADC_RESOLUTION12b               ADC_RESOLUTION_12B
+#define ADC_RESOLUTION10b               ADC_RESOLUTION_10B
+#define ADC_RESOLUTION8b                ADC_RESOLUTION_8B
+#define ADC_RESOLUTION6b                ADC_RESOLUTION_6B
+#define OVR_DATA_OVERWRITTEN            ADC_OVR_DATA_OVERWRITTEN
+#define OVR_DATA_PRESERVED              ADC_OVR_DATA_PRESERVED
+#define EOC_SINGLE_CONV                 ADC_EOC_SINGLE_CONV
+#define EOC_SEQ_CONV                    ADC_EOC_SEQ_CONV
+#define EOC_SINGLE_SEQ_CONV             ADC_EOC_SINGLE_SEQ_CONV
+#define REGULAR_GROUP                   ADC_REGULAR_GROUP
+#define INJECTED_GROUP                  ADC_INJECTED_GROUP
+#define REGULAR_INJECTED_GROUP          ADC_REGULAR_INJECTED_GROUP
+#define AWD_EVENT                       ADC_AWD_EVENT
+#define AWD1_EVENT                      ADC_AWD1_EVENT
+#define AWD2_EVENT                      ADC_AWD2_EVENT
+#define AWD3_EVENT                      ADC_AWD3_EVENT
+#define OVR_EVENT                       ADC_OVR_EVENT
+#define JQOVF_EVENT                     ADC_JQOVF_EVENT
+#define ALL_CHANNELS                    ADC_ALL_CHANNELS
+#define REGULAR_CHANNELS                ADC_REGULAR_CHANNELS
+#define INJECTED_CHANNELS               ADC_INJECTED_CHANNELS
+#define SYSCFG_FLAG_SENSOR_ADC          ADC_FLAG_SENSOR
+#define SYSCFG_FLAG_VREF_ADC            ADC_FLAG_VREFINT
+#define ADC_CLOCKPRESCALER_PCLK_DIV1    ADC_CLOCK_SYNC_PCLK_DIV1
+#define ADC_CLOCKPRESCALER_PCLK_DIV2    ADC_CLOCK_SYNC_PCLK_DIV2
+#define ADC_CLOCKPRESCALER_PCLK_DIV4    ADC_CLOCK_SYNC_PCLK_DIV4
+#define ADC_CLOCKPRESCALER_PCLK_DIV6    ADC_CLOCK_SYNC_PCLK_DIV6
+#define ADC_CLOCKPRESCALER_PCLK_DIV8    ADC_CLOCK_SYNC_PCLK_DIV8
+#define ADC_EXTERNALTRIG0_T6_TRGO       ADC_EXTERNALTRIGCONV_T6_TRGO 
+#define ADC_EXTERNALTRIG1_T21_CC2       ADC_EXTERNALTRIGCONV_T21_CC2 
+#define ADC_EXTERNALTRIG2_T2_TRGO       ADC_EXTERNALTRIGCONV_T2_TRGO 
+#define ADC_EXTERNALTRIG3_T2_CC4        ADC_EXTERNALTRIGCONV_T2_CC4  
+#define ADC_EXTERNALTRIG4_T22_TRGO      ADC_EXTERNALTRIGCONV_T22_TRGO
+#define ADC_EXTERNALTRIG7_EXT_IT11      ADC_EXTERNALTRIGCONV_EXT_IT11
+#define ADC_CLOCK_ASYNC                 ADC_CLOCK_ASYNC_DIV1
+#define ADC_EXTERNALTRIG_EDGE_NONE      ADC_EXTERNALTRIGCONVEDGE_NONE
+#define ADC_EXTERNALTRIG_EDGE_RISING    ADC_EXTERNALTRIGCONVEDGE_RISING
+#define ADC_EXTERNALTRIG_EDGE_FALLING   ADC_EXTERNALTRIGCONVEDGE_FALLING
+#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
+
+#define HAL_ADC_STATE_BUSY_REG          HAL_ADC_STATE_REG_BUSY
+#define HAL_ADC_STATE_BUSY_INJ          HAL_ADC_STATE_INJ_BUSY
+#define HAL_ADC_STATE_EOC_REG           HAL_ADC_STATE_REG_EOC
+#define HAL_ADC_STATE_EOC_INJ           HAL_ADC_STATE_INJ_EOC
+#define HAL_ADC_STATE_ERROR             HAL_ADC_STATE_ERROR_INTERNAL
+#define HAL_ADC_STATE_BUSY              HAL_ADC_STATE_BUSY_INTERNAL
+#define HAL_ADC_STATE_AWD               HAL_ADC_STATE_AWD1 
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
+  * @{
+  */ 
+  
+#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG 
+
+/**
+  * @}
+  */   
+   
+/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+#define COMP_WINDOWMODE_DISABLED       COMP_WINDOWMODE_DISABLE
+#define COMP_WINDOWMODE_ENABLED        COMP_WINDOWMODE_ENABLE
+#define COMP_EXTI_LINE_COMP1_EVENT     COMP_EXTI_LINE_COMP1
+#define COMP_EXTI_LINE_COMP2_EVENT     COMP_EXTI_LINE_COMP2
+#define COMP_EXTI_LINE_COMP3_EVENT     COMP_EXTI_LINE_COMP3
+#define COMP_EXTI_LINE_COMP4_EVENT     COMP_EXTI_LINE_COMP4
+#define COMP_EXTI_LINE_COMP5_EVENT     COMP_EXTI_LINE_COMP5
+#define COMP_EXTI_LINE_COMP6_EVENT     COMP_EXTI_LINE_COMP6
+#define COMP_EXTI_LINE_COMP7_EVENT     COMP_EXTI_LINE_COMP7
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR  COMP_OUTPUT_COMP6_TIM2OCREFCLR
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define COMP_OUTPUT_TIM3IC1            COMP_OUTPUT_COMP1_TIM3IC1
+#define COMP_OUTPUT_TIM3OCREFCLR       COMP_OUTPUT_COMP1_TIM3OCREFCLR
+#endif /* STM32F373xC || STM32F378xx */
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CORTEX_Aliased_Defines HAL CORTEX Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG HAL_SYSTICK_CLKSourceConfig
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+#define CRC_OUTPUTDATA_INVERSION_DISABLED    CRC_OUTPUTDATA_INVERSION_DISABLE
+#define CRC_OUTPUTDATA_INVERSION_ENABLED     CRC_OUTPUTDATA_INVERSION_ENABLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define DAC1_CHANNEL_1                                  DAC_CHANNEL_1
+#define DAC1_CHANNEL_2                                  DAC_CHANNEL_2
+#define DAC2_CHANNEL_1                                  DAC_CHANNEL_1
+#define DAC_WAVE_NONE                                   ((uint32_t)0x00000000)
+#define DAC_WAVE_NOISE                                  ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVE_TRIANGLE                               ((uint32_t)DAC_CR_WAVE1_1)                           
+#define DAC_WAVEGENERATION_NONE                         DAC_WAVE_NONE
+#define DAC_WAVEGENERATION_NOISE                        DAC_WAVE_NOISE
+#define DAC_WAVEGENERATION_TRIANGLE                     DAC_WAVE_TRIANGLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define HAL_REMAPDMA_ADC_DMA_CH2                DMA_REMAP_ADC_DMA_CH2       
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4          DMA_REMAP_USART1_TX_DMA_CH4 
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5          DMA_REMAP_USART1_RX_DMA_CH5   
+#define HAL_REMAPDMA_TIM16_DMA_CH4              DMA_REMAP_TIM16_DMA_CH4       
+#define HAL_REMAPDMA_TIM17_DMA_CH2              DMA_REMAP_TIM17_DMA_CH2       
+#define HAL_REMAPDMA_USART3_DMA_CH32            DMA_REMAP_USART3_DMA_CH32
+#define HAL_REMAPDMA_TIM16_DMA_CH6              DMA_REMAP_TIM16_DMA_CH6
+#define HAL_REMAPDMA_TIM17_DMA_CH7              DMA_REMAP_TIM17_DMA_CH7      
+#define HAL_REMAPDMA_SPI2_DMA_CH67              DMA_REMAP_SPI2_DMA_CH67  
+#define HAL_REMAPDMA_USART2_DMA_CH67            DMA_REMAP_USART2_DMA_CH67 
+#define HAL_REMAPDMA_USART3_DMA_CH32            DMA_REMAP_USART3_DMA_CH32  
+#define HAL_REMAPDMA_I2C1_DMA_CH76              DMA_REMAP_I2C1_DMA_CH76   
+#define HAL_REMAPDMA_TIM1_DMA_CH6               DMA_REMAP_TIM1_DMA_CH6     
+#define HAL_REMAPDMA_TIM2_DMA_CH7               DMA_REMAP_TIM2_DMA_CH7      
+#define HAL_REMAPDMA_TIM3_DMA_CH6               DMA_REMAP_TIM3_DMA_CH6    
+  
+#define IS_HAL_REMAPDMA                          IS_DMA_REMAP  
+#define __HAL_REMAPDMA_CHANNEL_ENABLE            __HAL_DMA_REMAP_CHANNEL_ENABLE
+#define __HAL_REMAPDMA_CHANNEL_DISABLE           __HAL_DMA_REMAP_CHANNEL_DISABLE
+  
+  
+  
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+#define TYPEPROGRAM_BYTE              FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_HALFWORD          FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_WORD              FLASH_TYPEPROGRAM_WORD
+#define TYPEPROGRAM_DOUBLEWORD        FLASH_TYPEPROGRAM_DOUBLEWORD
+#define TYPEERASE_SECTORS             FLASH_TYPEERASE_SECTORS
+#define TYPEERASE_PAGES               FLASH_TYPEERASE_PAGES
+#define TYPEERASE_PAGEERASE           FLASH_TYPEERASE_PAGES
+#define TYPEERASE_MASSERASE           FLASH_TYPEERASE_MASSERASE
+#define WRPSTATE_DISABLE              OB_WRPSTATE_DISABLE
+#define WRPSTATE_ENABLE               OB_WRPSTATE_ENABLE
+#define HAL_FLASH_TIMEOUT_VALUE       FLASH_TIMEOUT_VALUE
+#define OBEX_PCROP                    OPTIONBYTE_PCROP
+#define OBEX_BOOTCONFIG               OPTIONBYTE_BOOTCONFIG
+#define PCROPSTATE_DISABLE            OB_PCROP_STATE_DISABLE
+#define PCROPSTATE_ENABLE             OB_PCROP_STATE_ENABLE
+#define TYPEERASEDATA_BYTE            FLASH_TYPEERASEDATA_BYTE
+#define TYPEERASEDATA_HALFWORD        FLASH_TYPEERASEDATA_HALFWORD
+#define TYPEERASEDATA_WORD            FLASH_TYPEERASEDATA_WORD
+#define TYPEPROGRAMDATA_BYTE          FLASH_TYPEPROGRAMDATA_BYTE
+#define TYPEPROGRAMDATA_HALFWORD      FLASH_TYPEPROGRAMDATA_HALFWORD
+#define TYPEPROGRAMDATA_WORD          FLASH_TYPEPROGRAMDATA_WORD
+#define TYPEPROGRAMDATA_FASTBYTE      FLASH_TYPEPROGRAMDATA_FASTBYTE
+#define TYPEPROGRAMDATA_FASTHALFWORD  FLASH_TYPEPROGRAMDATA_FASTHALFWORD
+#define TYPEPROGRAMDATA_FASTWORD      FLASH_TYPEPROGRAMDATA_FASTWORD
+#define PAGESIZE                      FLASH_PAGE_SIZE
+#define TYPEPROGRAM_FASTBYTE          FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_FASTHALFWORD      FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_FASTWORD          FLASH_TYPEPROGRAM_WORD
+#define VOLTAGE_RANGE_1               FLASH_VOLTAGE_RANGE_1
+#define VOLTAGE_RANGE_2               FLASH_VOLTAGE_RANGE_2
+#define VOLTAGE_RANGE_3               FLASH_VOLTAGE_RANGE_3
+#define VOLTAGE_RANGE_4               FLASH_VOLTAGE_RANGE_4
+#define TYPEPROGRAM_FAST              FLASH_TYPEPROGRAM_FAST
+#define TYPEPROGRAM_FAST_AND_LAST     FLASH_TYPEPROGRAM_FAST_AND_LAST
+#define WRPAREA_BANK1_AREAA           OB_WRPAREA_BANK1_AREAA
+#define WRPAREA_BANK1_AREAB           OB_WRPAREA_BANK1_AREAB
+#define WRPAREA_BANK2_AREAA           OB_WRPAREA_BANK2_AREAA
+#define WRPAREA_BANK2_AREAB           OB_WRPAREA_BANK2_AREAB
+#define IWDG_STDBY_FREEZE             OB_IWDG_STDBY_FREEZE
+#define IWDG_STDBY_ACTIVE             OB_IWDG_STDBY_RUN
+#define IWDG_STOP_FREEZE              OB_IWDG_STOP_FREEZE
+#define IWDG_STOP_ACTIVE              OB_IWDG_STOP_RUN
+#define FLASH_ERROR_NONE              HAL_FLASH_ERROR_NONE
+#define FLASH_ERROR_RD                HAL_FLASH_ERROR_RD
+#define FLASH_ERROR_PG                HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_PGP               HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_WRP               HAL_FLASH_ERROR_WRP
+#define FLASH_ERROR_OPTV              HAL_FLASH_ERROR_OPTV
+#define FLASH_ERROR_OPTVUSR           HAL_FLASH_ERROR_OPTVUSR
+#define FLASH_ERROR_PROG              HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_OP                HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_PGA               HAL_FLASH_ERROR_PGA
+#define FLASH_ERROR_SIZE              HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_SIZ               HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_PGS               HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_MIS               HAL_FLASH_ERROR_MIS
+#define FLASH_ERROR_FAST              HAL_FLASH_ERROR_FAST
+#define FLASH_ERROR_FWWERR            HAL_FLASH_ERROR_FWWERR
+#define FLASH_ERROR_NOTZERO           HAL_FLASH_ERROR_NOTZERO
+#define FLASH_ERROR_OPERATION         HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_ERS               HAL_FLASH_ERROR_ERS
+#define OB_WDG_SW                     OB_IWDG_SW
+#define OB_WDG_HW                     OB_IWDG_HW
+#define OB_SDADC12_VDD_MONITOR_SET    OB_SDACD_VDD_MONITOR_SET
+#define OB_SDADC12_VDD_MONITOR_RESET  OB_SDACD_VDD_MONITOR_RESET
+#define OB_RAM_PARITY_CHECK_SET       OB_SRAM_PARITY_SET
+#define OB_RAM_PARITY_CHECK_RESET     OB_SRAM_PARITY_RESET
+#define IS_OB_SDADC12_VDD_MONITOR     IS_OB_SDACD_VDD_MONITOR
+#define OB_RDP_LEVEL0                 OB_RDP_LEVEL_0
+#define OB_RDP_LEVEL1                 OB_RDP_LEVEL_1
+#define OB_RDP_LEVEL2                 OB_RDP_LEVEL_2
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9    I2C_FASTMODEPLUS_PA9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10   I2C_FASTMODEPLUS_PA10
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6    I2C_FASTMODEPLUS_PB6
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7    I2C_FASTMODEPLUS_PB7
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8    I2C_FASTMODEPLUS_PB8
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9    I2C_FASTMODEPLUS_PB9
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1       I2C_FASTMODEPLUS_I2C1
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2       I2C_FASTMODEPLUS_I2C2
+#define HAL_SYSCFG_FASTMODEPLUS_I2C3       I2C_FASTMODEPLUS_I2C3
+/**
+  * @}
+  */
+  
+
+/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
+  * @{
+  */
+#if defined(STM32L4) || defined(STM32F7)
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE       FMC_NAND_WAIT_FEATURE_DISABLE
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE        FMC_NAND_WAIT_FEATURE_ENABLE
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8            FMC_NAND_MEM_BUS_WIDTH_8
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16           FMC_NAND_MEM_BUS_WIDTH_16
+#else
+#define FMC_NAND_WAIT_FEATURE_DISABLE           FMC_NAND_PCC_WAIT_FEATURE_DISABLE
+#define FMC_NAND_WAIT_FEATURE_ENABLE            FMC_NAND_PCC_WAIT_FEATURE_ENABLE
+#define FMC_NAND_MEM_BUS_WIDTH_8                FMC_NAND_PCC_MEM_BUS_WIDTH_8
+#define FMC_NAND_MEM_BUS_WIDTH_16               FMC_NAND_PCC_MEM_BUS_WIDTH_16
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+#define FSMC_NORSRAM_TYPEDEF                      FSMC_NORSRAM_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TYPEDEF             FSMC_NORSRAM_EXTENDED_TypeDef
+/**
+  * @}
+  */
+
+/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define GET_GPIO_SOURCE                           GPIO_GET_INDEX
+#define GET_GPIO_INDEX                            GPIO_GET_INDEX
+
+#if defined(STM32F4)
+#define GPIO_AF12_SDMMC                           GPIO_AF12_SDIO
+#define GPIO_AF12_SDMMC1                          GPIO_AF12_SDIO
+#endif
+
+#if defined(STM32F7)
+#define GPIO_AF12_SDIO                            GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC                           GPIO_AF12_SDMMC1
+#endif
+
+#if defined(STM32L4)
+#define GPIO_AF12_SDIO                            GPIO_AF12_SDMMC1
+#define GPIO_AF12_SDMMC                           GPIO_AF12_SDMMC1
+#endif
+
+#define GPIO_AF0_LPTIM                            GPIO_AF0_LPTIM1
+#define GPIO_AF1_LPTIM                            GPIO_AF1_LPTIM1
+#define GPIO_AF2_LPTIM                            GPIO_AF2_LPTIM1
+
+#if defined(STM32L0) || defined(STM32L4) || defined(STM32F4) || defined(STM32F2) || defined(STM32F7)
+#define  GPIO_SPEED_LOW                           GPIO_SPEED_FREQ_LOW     
+#define  GPIO_SPEED_MEDIUM                        GPIO_SPEED_FREQ_MEDIUM     
+#define  GPIO_SPEED_FAST                          GPIO_SPEED_FREQ_HIGH     
+#define  GPIO_SPEED_HIGH                          GPIO_SPEED_FREQ_VERY_HIGH       
+#endif /* STM32L0 || STM32L4 || STM32F4 || STM32F2 || STM32F7 */
+
+#if defined(STM32L1) 
+ #define  GPIO_SPEED_VERY_LOW    GPIO_SPEED_FREQ_LOW     
+ #define  GPIO_SPEED_LOW         GPIO_SPEED_FREQ_MEDIUM     
+ #define  GPIO_SPEED_MEDIUM      GPIO_SPEED_FREQ_HIGH     
+ #define  GPIO_SPEED_HIGH        GPIO_SPEED_FREQ_VERY_HIGH     
+#endif /* STM32L1 */
+
+#if defined(STM32F3) || defined(STM32F1)
+ #define  GPIO_SPEED_LOW    GPIO_SPEED_FREQ_LOW
+ #define  GPIO_SPEED_MEDIUM GPIO_SPEED_FREQ_MEDIUM
+ #define  GPIO_SPEED_HIGH   GPIO_SPEED_FREQ_HIGH
+#endif /* STM32F3 */
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED           HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68     HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79  HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79     HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
+   
+#define __HAL_HRTIM_SetCounter        __HAL_HRTIM_SETCOUNTER
+#define __HAL_HRTIM_GetCounter        __HAL_HRTIM_GETCOUNTER
+#define __HAL_HRTIM_SetPeriod         __HAL_HRTIM_SETPERIOD
+#define __HAL_HRTIM_GetPeriod         __HAL_HRTIM_GETPERIOD
+#define __HAL_HRTIM_SetClockPrescaler __HAL_HRTIM_SETCLOCKPRESCALER
+#define __HAL_HRTIM_GetClockPrescaler __HAL_HRTIM_GETCLOCKPRESCALER
+#define __HAL_HRTIM_SetCompare        __HAL_HRTIM_SETCOMPARE
+#define __HAL_HRTIM_GetCompare        __HAL_HRTIM_GETCOMPARE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define I2C_DUALADDRESS_DISABLED                I2C_DUALADDRESS_DISABLE
+#define I2C_DUALADDRESS_ENABLED                 I2C_DUALADDRESS_ENABLE
+#define I2C_GENERALCALL_DISABLED                I2C_GENERALCALL_DISABLE
+#define I2C_GENERALCALL_ENABLED                 I2C_GENERALCALL_ENABLE
+#define I2C_NOSTRETCH_DISABLED                  I2C_NOSTRETCH_DISABLE
+#define I2C_NOSTRETCH_ENABLED                   I2C_NOSTRETCH_ENABLE
+#define I2C_ANALOGFILTER_ENABLED                I2C_ANALOGFILTER_ENABLE
+#define I2C_ANALOGFILTER_DISABLED               I2C_ANALOGFILTER_DISABLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED            IRDA_ONE_BIT_SAMPLE_DISABLE
+#define IRDA_ONE_BIT_SAMPLE_ENABLED             IRDA_ONE_BIT_SAMPLE_ENABLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define KR_KEY_RELOAD                   IWDG_KEY_RELOAD
+#define KR_KEY_ENABLE                   IWDG_KEY_ENABLE
+#define KR_KEY_EWA                      IWDG_KEY_WRITE_ACCESS_ENABLE
+#define KR_KEY_DWA                      IWDG_KEY_WRITE_ACCESS_DISABLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS     LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS     LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS     LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
+
+#define LPTIM_CLOCKPOLARITY_RISINGEDGE          LPTIM_CLOCKPOLARITY_RISING
+#define LPTIM_CLOCKPOLARITY_FALLINGEDGE         LPTIM_CLOCKPOLARITY_FALLING
+#define LPTIM_CLOCKPOLARITY_BOTHEDGES           LPTIM_CLOCKPOLARITY_RISING_FALLING
+
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION  LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS      LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS      LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS      LPTIM_TRIGSAMPLETIME_8TRANSITIONS        
+
+/* The following 3 definition have also been present in a temporary version of lptim.h */
+/* They need to be renamed also to the right name, just in case */
+#define LPTIM_TRIGSAMPLETIME_2TRANSITION        LPTIM_TRIGSAMPLETIME_2TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_4TRANSITION        LPTIM_TRIGSAMPLETIME_4TRANSITIONS
+#define LPTIM_TRIGSAMPLETIME_8TRANSITION        LPTIM_TRIGSAMPLETIME_8TRANSITIONS
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define NAND_AddressTypedef             NAND_AddressTypeDef
+
+#define __ARRAY_ADDRESS                 ARRAY_ADDRESS
+#define __ADDR_1st_CYCLE                ADDR_1ST_CYCLE
+#define __ADDR_2nd_CYCLE                ADDR_2ND_CYCLE
+#define __ADDR_3rd_CYCLE                ADDR_3RD_CYCLE
+#define __ADDR_4th_CYCLE                ADDR_4TH_CYCLE
+/**
+  * @}
+  */
+   
+/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define NOR_StatusTypedef              HAL_NOR_StatusTypeDef
+#define NOR_SUCCESS                    HAL_NOR_STATUS_SUCCESS
+#define NOR_ONGOING                    HAL_NOR_STATUS_ONGOING
+#define NOR_ERROR                      HAL_NOR_STATUS_ERROR
+#define NOR_TIMEOUT                    HAL_NOR_STATUS_TIMEOUT
+
+#define __NOR_WRITE                    NOR_WRITE
+#define __NOR_ADDR_SHIFT               NOR_ADDR_SHIFT
+/**
+  * @}
+  */
+
+/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define OPAMP_NONINVERTINGINPUT_VP0           OPAMP_NONINVERTINGINPUT_IO0
+#define OPAMP_NONINVERTINGINPUT_VP1           OPAMP_NONINVERTINGINPUT_IO1
+#define OPAMP_NONINVERTINGINPUT_VP2           OPAMP_NONINVERTINGINPUT_IO2
+#define OPAMP_NONINVERTINGINPUT_VP3           OPAMP_NONINVERTINGINPUT_IO3
+                                              
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0       OPAMP_SEC_NONINVERTINGINPUT_IO0
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1       OPAMP_SEC_NONINVERTINGINPUT_IO1
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2       OPAMP_SEC_NONINVERTINGINPUT_IO2
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3       OPAMP_SEC_NONINVERTINGINPUT_IO3   
+
+#define OPAMP_INVERTINGINPUT_VM0              OPAMP_INVERTINGINPUT_IO0
+#define OPAMP_INVERTINGINPUT_VM1              OPAMP_INVERTINGINPUT_IO1
+
+#define IOPAMP_INVERTINGINPUT_VM0             OPAMP_INVERTINGINPUT_IO0
+#define IOPAMP_INVERTINGINPUT_VM1             OPAMP_INVERTINGINPUT_IO1
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0          OPAMP_SEC_INVERTINGINPUT_IO0
+#define OPAMP_SEC_INVERTINGINPUT_VM1          OPAMP_SEC_INVERTINGINPUT_IO1    
+
+#define OPAMP_INVERTINGINPUT_VINM             OPAMP_SEC_INVERTINGINPUT_IO1
+                                                                      
+#define OPAMP_PGACONNECT_NO                   OPAMP_PGA_CONNECT_INVERTINGINPUT_NO             
+#define OPAMP_PGACONNECT_VM0                  OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0            
+#define OPAMP_PGACONNECT_VM1                  OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1          
+                                                        
+/**
+  * @}
+  */
+
+/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define I2S_STANDARD_PHILLIPS      I2S_STANDARD_PHILIPS
+/**
+  * @}
+  */
+
+/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA                       ATA_DATA                
+#define CF_SECTOR_COUNT               ATA_SECTOR_COUNT        
+#define CF_SECTOR_NUMBER              ATA_SECTOR_NUMBER       
+#define CF_CYLINDER_LOW               ATA_CYLINDER_LOW        
+#define CF_CYLINDER_HIGH              ATA_CYLINDER_HIGH       
+#define CF_CARD_HEAD                  ATA_CARD_HEAD           
+#define CF_STATUS_CMD                 ATA_STATUS_CMD          
+#define CF_STATUS_CMD_ALTERNATE       ATA_STATUS_CMD_ALTERNATE
+#define CF_COMMON_DATA_AREA           ATA_COMMON_DATA_AREA    
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD            ATA_READ_SECTOR_CMD 
+#define CF_WRITE_SECTOR_CMD           ATA_WRITE_SECTOR_CMD
+#define CF_ERASE_SECTOR_CMD           ATA_ERASE_SECTOR_CMD
+#define CF_IDENTIFY_CMD               ATA_IDENTIFY_CMD
+
+#define PCCARD_StatusTypedef          HAL_PCCARD_StatusTypeDef
+#define PCCARD_SUCCESS                HAL_PCCARD_STATUS_SUCCESS
+#define PCCARD_ONGOING                HAL_PCCARD_STATUS_ONGOING
+#define PCCARD_ERROR                  HAL_PCCARD_STATUS_ERROR
+#define PCCARD_TIMEOUT                HAL_PCCARD_STATUS_TIMEOUT
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+#define FORMAT_BIN                  RTC_FORMAT_BIN
+#define FORMAT_BCD                  RTC_FORMAT_BCD
+
+#define RTC_ALARMSUBSECONDMASK_None     RTC_ALARMSUBSECONDMASK_NONE
+#define RTC_TAMPERERASEBACKUP_ENABLED   RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED  RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_TAMPERMASK_FLAG_DISABLED    RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_TAMPERMASK_FLAG_ENABLED     RTC_TAMPERMASK_FLAG_ENABLE
+
+#define RTC_MASKTAMPERFLAG_DISABLED     RTC_TAMPERMASK_FLAG_DISABLE 
+#define RTC_MASKTAMPERFLAG_ENABLED      RTC_TAMPERMASK_FLAG_ENABLE 
+#define RTC_TAMPERERASEBACKUP_ENABLED   RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED  RTC_TAMPER_ERASE_BACKUP_DISABLE 
+#define RTC_MASKTAMPERFLAG_DISABLED     RTC_TAMPERMASK_FLAG_DISABLE 
+#define RTC_MASKTAMPERFLAG_ENABLED      RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPER1_2_INTERRUPT         RTC_ALL_TAMPER_INTERRUPT 
+#define RTC_TAMPER1_2_3_INTERRUPT       RTC_ALL_TAMPER_INTERRUPT 
+
+#define RTC_TIMESTAMPPIN_PC13  RTC_TIMESTAMPPIN_DEFAULT
+#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1 
+#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
+#define RTC_TIMESTAMPPIN_PC1   RTC_TIMESTAMPPIN_POS2
+
+#define RTC_OUTPUT_REMAP_PC13  RTC_OUTPUT_REMAP_NONE
+#define RTC_OUTPUT_REMAP_PB14  RTC_OUTPUT_REMAP_POS1
+#define RTC_OUTPUT_REMAP_PB2   RTC_OUTPUT_REMAP_POS1
+
+#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT 
+#define RTC_TAMPERPIN_PA0  RTC_TAMPERPIN_POS1 
+#define RTC_TAMPERPIN_PI8  RTC_TAMPERPIN_POS1
+
+/**
+  * @}
+  */
+
+  
+/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define SMARTCARD_NACK_ENABLED                  SMARTCARD_NACK_ENABLE
+#define SMARTCARD_NACK_DISABLED                 SMARTCARD_NACK_DISABLE
+
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED      SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED       SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLE       SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLE        SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+
+#define SMARTCARD_TIMEOUT_DISABLED              SMARTCARD_TIMEOUT_DISABLE
+#define SMARTCARD_TIMEOUT_ENABLED               SMARTCARD_TIMEOUT_ENABLE
+
+#define SMARTCARD_LASTBIT_DISABLED              SMARTCARD_LASTBIT_DISABLE
+#define SMARTCARD_LASTBIT_ENABLED               SMARTCARD_LASTBIT_ENABLE
+/**
+  * @}
+  */
+
+  
+  /** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define SMBUS_DUALADDRESS_DISABLED      SMBUS_DUALADDRESS_DISABLE
+#define SMBUS_DUALADDRESS_ENABLED       SMBUS_DUALADDRESS_ENABLE
+#define SMBUS_GENERALCALL_DISABLED      SMBUS_GENERALCALL_DISABLE
+#define SMBUS_GENERALCALL_ENABLED       SMBUS_GENERALCALL_ENABLE
+#define SMBUS_NOSTRETCH_DISABLED        SMBUS_NOSTRETCH_DISABLE
+#define SMBUS_NOSTRETCH_ENABLED         SMBUS_NOSTRETCH_ENABLE
+#define SMBUS_ANALOGFILTER_ENABLED      SMBUS_ANALOGFILTER_ENABLE
+#define SMBUS_ANALOGFILTER_DISABLED     SMBUS_ANALOGFILTER_DISABLE
+#define SMBUS_PEC_DISABLED              SMBUS_PEC_DISABLE
+#define SMBUS_PEC_ENABLED               SMBUS_PEC_ENABLE
+#define HAL_SMBUS_STATE_SLAVE_LISTEN    HAL_SMBUS_STATE_LISTEN
+/**
+  * @}
+  */
+  
+  /** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define SPI_TIMODE_DISABLED             SPI_TIMODE_DISABLE
+#define SPI_TIMODE_ENABLED              SPI_TIMODE_ENABLE
+
+#define SPI_CRCCALCULATION_DISABLED     SPI_CRCCALCULATION_DISABLE
+#define SPI_CRCCALCULATION_ENABLED      SPI_CRCCALCULATION_ENABLE
+
+#define SPI_NSS_PULSE_DISABLED          SPI_NSS_PULSE_DISABLE
+#define SPI_NSS_PULSE_ENABLED           SPI_NSS_PULSE_ENABLE
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define CCER_CCxE_MASK                   TIM_CCER_CCxE_MASK
+#define CCER_CCxNE_MASK                  TIM_CCER_CCxNE_MASK
+  
+#define TIM_DMABase_CR1                  TIM_DMABASE_CR1
+#define TIM_DMABase_CR2                  TIM_DMABASE_CR2
+#define TIM_DMABase_SMCR                 TIM_DMABASE_SMCR
+#define TIM_DMABase_DIER                 TIM_DMABASE_DIER
+#define TIM_DMABase_SR                   TIM_DMABASE_SR
+#define TIM_DMABase_EGR                  TIM_DMABASE_EGR
+#define TIM_DMABase_CCMR1                TIM_DMABASE_CCMR1
+#define TIM_DMABase_CCMR2                TIM_DMABASE_CCMR2
+#define TIM_DMABase_CCER                 TIM_DMABASE_CCER
+#define TIM_DMABase_CNT                  TIM_DMABASE_CNT
+#define TIM_DMABase_PSC                  TIM_DMABASE_PSC
+#define TIM_DMABase_ARR                  TIM_DMABASE_ARR
+#define TIM_DMABase_RCR                  TIM_DMABASE_RCR
+#define TIM_DMABase_CCR1                 TIM_DMABASE_CCR1
+#define TIM_DMABase_CCR2                 TIM_DMABASE_CCR2
+#define TIM_DMABase_CCR3                 TIM_DMABASE_CCR3
+#define TIM_DMABase_CCR4                 TIM_DMABASE_CCR4
+#define TIM_DMABase_BDTR                 TIM_DMABASE_BDTR
+#define TIM_DMABase_DCR                  TIM_DMABASE_DCR
+#define TIM_DMABase_DMAR                 TIM_DMABASE_DMAR
+#define TIM_DMABase_OR1                  TIM_DMABASE_OR1
+#define TIM_DMABase_CCMR3                TIM_DMABASE_CCMR3
+#define TIM_DMABase_CCR5                 TIM_DMABASE_CCR5
+#define TIM_DMABase_CCR6                 TIM_DMABASE_CCR6
+#define TIM_DMABase_OR2                  TIM_DMABASE_OR2
+#define TIM_DMABase_OR3                  TIM_DMABASE_OR3
+#define TIM_DMABase_OR                   TIM_DMABASE_OR
+
+#define TIM_EventSource_Update           TIM_EVENTSOURCE_UPDATE
+#define TIM_EventSource_CC1              TIM_EVENTSOURCE_CC1
+#define TIM_EventSource_CC2              TIM_EVENTSOURCE_CC2
+#define TIM_EventSource_CC3              TIM_EVENTSOURCE_CC3
+#define TIM_EventSource_CC4              TIM_EVENTSOURCE_CC4
+#define TIM_EventSource_COM              TIM_EVENTSOURCE_COM
+#define TIM_EventSource_Trigger          TIM_EVENTSOURCE_TRIGGER
+#define TIM_EventSource_Break            TIM_EVENTSOURCE_BREAK
+#define TIM_EventSource_Break2           TIM_EVENTSOURCE_BREAK2
+
+#define TIM_DMABurstLength_1Transfer     TIM_DMABURSTLENGTH_1TRANSFER
+#define TIM_DMABurstLength_2Transfers    TIM_DMABURSTLENGTH_2TRANSFERS
+#define TIM_DMABurstLength_3Transfers    TIM_DMABURSTLENGTH_3TRANSFERS
+#define TIM_DMABurstLength_4Transfers    TIM_DMABURSTLENGTH_4TRANSFERS
+#define TIM_DMABurstLength_5Transfers    TIM_DMABURSTLENGTH_5TRANSFERS
+#define TIM_DMABurstLength_6Transfers    TIM_DMABURSTLENGTH_6TRANSFERS
+#define TIM_DMABurstLength_7Transfers    TIM_DMABURSTLENGTH_7TRANSFERS
+#define TIM_DMABurstLength_8Transfers    TIM_DMABURSTLENGTH_8TRANSFERS
+#define TIM_DMABurstLength_9Transfers    TIM_DMABURSTLENGTH_9TRANSFERS
+#define TIM_DMABurstLength_10Transfers   TIM_DMABURSTLENGTH_10TRANSFERS
+#define TIM_DMABurstLength_11Transfers   TIM_DMABURSTLENGTH_11TRANSFERS
+#define TIM_DMABurstLength_12Transfers   TIM_DMABURSTLENGTH_12TRANSFERS
+#define TIM_DMABurstLength_13Transfers   TIM_DMABURSTLENGTH_13TRANSFERS
+#define TIM_DMABurstLength_14Transfers   TIM_DMABURSTLENGTH_14TRANSFERS
+#define TIM_DMABurstLength_15Transfers   TIM_DMABURSTLENGTH_15TRANSFERS
+#define TIM_DMABurstLength_16Transfers   TIM_DMABURSTLENGTH_16TRANSFERS
+#define TIM_DMABurstLength_17Transfers   TIM_DMABURSTLENGTH_17TRANSFERS
+#define TIM_DMABurstLength_18Transfers   TIM_DMABURSTLENGTH_18TRANSFERS
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define TSC_SYNC_POL_FALL        TSC_SYNC_POLARITY_FALLING
+#define TSC_SYNC_POL_RISE_HIGH   TSC_SYNC_POLARITY_RISING
+/**
+  * @}
+  */
+
+/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define UART_ONEBIT_SAMPLING_DISABLED   UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONEBIT_SAMPLING_ENABLED    UART_ONE_BIT_SAMPLE_ENABLE
+#define UART_ONE_BIT_SAMPLE_DISABLED    UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONE_BIT_SAMPLE_ENABLED     UART_ONE_BIT_SAMPLE_ENABLE
+
+#define __HAL_UART_ONEBIT_ENABLE        __HAL_UART_ONE_BIT_SAMPLE_ENABLE
+#define __HAL_UART_ONEBIT_DISABLE       __HAL_UART_ONE_BIT_SAMPLE_DISABLE
+
+#define __DIV_SAMPLING16                UART_DIV_SAMPLING16
+#define __DIVMANT_SAMPLING16            UART_DIVMANT_SAMPLING16
+#define __DIVFRAQ_SAMPLING16            UART_DIVFRAQ_SAMPLING16
+#define __UART_BRR_SAMPLING16           UART_BRR_SAMPLING16
+
+#define __DIV_SAMPLING8                 UART_DIV_SAMPLING8
+#define __DIVMANT_SAMPLING8             UART_DIVMANT_SAMPLING8
+#define __DIVFRAQ_SAMPLING8             UART_DIVFRAQ_SAMPLING8
+#define __UART_BRR_SAMPLING8            UART_BRR_SAMPLING8
+
+#define UART_WAKEUPMETHODE_IDLELINE     UART_WAKEUPMETHOD_IDLELINE
+#define UART_WAKEUPMETHODE_ADDRESSMARK  UART_WAKEUPMETHOD_ADDRESSMARK
+
+/**
+  * @}
+  */
+
+  
+/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define USART_CLOCK_DISABLED            USART_CLOCK_DISABLE
+#define USART_CLOCK_ENABLED             USART_CLOCK_ENABLE
+
+#define USARTNACK_ENABLED               USART_NACK_ENABLE
+#define USARTNACK_DISABLED              USART_NACK_DISABLE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define CFR_BASE                    WWDG_CFR_BASE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
+  * @{
+  */
+#define CAN_FilterFIFO0             CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1             CAN_FILTER_FIFO1
+#define CAN_IT_RQCP0                CAN_IT_TME
+#define CAN_IT_RQCP1                CAN_IT_TME
+#define CAN_IT_RQCP2                CAN_IT_TME
+#define INAK_TIMEOUT                CAN_TIMEOUT_VALUE
+#define SLAK_TIMEOUT                CAN_TIMEOUT_VALUE
+#define CAN_TXSTATUS_FAILED         ((uint8_t)0x00)
+#define CAN_TXSTATUS_OK             ((uint8_t)0x01)
+#define CAN_TXSTATUS_PENDING        ((uint8_t)0x02)
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
+  * @{
+  */
+
+#define VLAN_TAG                ETH_VLAN_TAG
+#define MIN_ETH_PAYLOAD         ETH_MIN_ETH_PAYLOAD
+#define MAX_ETH_PAYLOAD         ETH_MAX_ETH_PAYLOAD
+#define JUMBO_FRAME_PAYLOAD     ETH_JUMBO_FRAME_PAYLOAD
+#define MACMIIAR_CR_MASK        ETH_MACMIIAR_CR_MASK
+#define MACCR_CLEAR_MASK        ETH_MACCR_CLEAR_MASK
+#define MACFCR_CLEAR_MASK       ETH_MACFCR_CLEAR_MASK
+#define DMAOMR_CLEAR_MASK       ETH_DMAOMR_CLEAR_MASK
+
+#define ETH_MMCCR              ((uint32_t)0x00000100)  
+#define ETH_MMCRIR             ((uint32_t)0x00000104)  
+#define ETH_MMCTIR             ((uint32_t)0x00000108)  
+#define ETH_MMCRIMR            ((uint32_t)0x0000010C)  
+#define ETH_MMCTIMR            ((uint32_t)0x00000110)  
+#define ETH_MMCTGFSCCR         ((uint32_t)0x0000014C)  
+#define ETH_MMCTGFMSCCR        ((uint32_t)0x00000150)  
+#define ETH_MMCTGFCR           ((uint32_t)0x00000168)  
+#define ETH_MMCRFCECR          ((uint32_t)0x00000194)  
+#define ETH_MMCRFAECR          ((uint32_t)0x00000198)  
+#define ETH_MMCRGUFCR          ((uint32_t)0x000001C4) 
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
+  * @{
+  */
+  
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_CRYP_ComputationCpltCallback     HAL_CRYPEx_ComputationCpltCallback
+/**
+  * @}
+  */  
+
+/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
+  * @{
+  */ 
+#define HAL_HASH_STATETypeDef        HAL_HASH_StateTypeDef
+#define HAL_HASHPhaseTypeDef         HAL_HASH_PhaseTypeDef
+#define HAL_HMAC_MD5_Finish          HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish         HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish       HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish       HAL_HASH_SHA256_Finish
+
+/*HASH Algorithm Selection*/
+
+#define HASH_AlgoSelection_SHA1      HASH_ALGOSELECTION_SHA1 
+#define HASH_AlgoSelection_SHA224    HASH_ALGOSELECTION_SHA224
+#define HASH_AlgoSelection_SHA256    HASH_ALGOSELECTION_SHA256
+#define HASH_AlgoSelection_MD5       HASH_ALGOSELECTION_MD5
+
+#define HASH_AlgoMode_HASH         HASH_ALGOMODE_HASH 
+#define HASH_AlgoMode_HMAC         HASH_ALGOMODE_HMAC
+
+#define HASH_HMACKeyType_ShortKey  HASH_HMAC_KEYTYPE_SHORTKEY
+#define HASH_HMACKeyType_LongKey   HASH_HMAC_KEYTYPE_LONGKEY
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
+#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
+#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
+#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
+#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
+#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_VREFINT_OutputSelect  HAL_SYSCFG_VREFINT_OutputSelect
+#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
+#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
+#define HAL_ADC_EnableBuffer_Cmd(cmd)  (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ?  HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define FLASH_HalfPageProgram      HAL_FLASHEx_HalfPageProgram
+#define FLASH_EnableRunPowerDown   HAL_FLASHEx_EnableRunPowerDown
+#define FLASH_DisableRunPowerDown  HAL_FLASHEx_DisableRunPowerDown
+#define HAL_DATA_EEPROMEx_Unlock   HAL_FLASHEx_DATAEEPROM_Unlock
+#define HAL_DATA_EEPROMEx_Lock     HAL_FLASHEx_DATAEEPROM_Lock
+#define HAL_DATA_EEPROMEx_Erase    HAL_FLASHEx_DATAEEPROM_Erase
+#define HAL_DATA_EEPROMEx_Program  HAL_FLASHEx_DATAEEPROM_Program
+
+ /**
+  * @}
+  */
+
+/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_I2CEx_AnalogFilter_Config      HAL_I2CEx_ConfigAnalogFilter
+#define HAL_I2CEx_DigitalFilter_Config     HAL_I2CEx_ConfigDigitalFilter
+
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+ /**
+  * @}
+  */
+
+/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
+  * @{
+  */
+#define HAL_PWR_PVDConfig                             HAL_PWR_ConfigPVD
+#define HAL_PWR_DisableBkUpReg                        HAL_PWREx_DisableBkUpReg
+#define HAL_PWR_DisableFlashPowerDown                 HAL_PWREx_DisableFlashPowerDown
+#define HAL_PWR_DisableVddio2Monitor                  HAL_PWREx_DisableVddio2Monitor
+#define HAL_PWR_EnableBkUpReg                         HAL_PWREx_EnableBkUpReg
+#define HAL_PWR_EnableFlashPowerDown                  HAL_PWREx_EnableFlashPowerDown
+#define HAL_PWR_EnableVddio2Monitor                   HAL_PWREx_EnableVddio2Monitor
+#define HAL_PWR_PVD_PVM_IRQHandler                    HAL_PWREx_PVD_PVM_IRQHandler
+#define HAL_PWR_PVDLevelConfig                        HAL_PWR_ConfigPVD
+#define HAL_PWR_Vddio2Monitor_IRQHandler              HAL_PWREx_Vddio2Monitor_IRQHandler
+#define HAL_PWR_Vddio2MonitorCallback                 HAL_PWREx_Vddio2MonitorCallback
+#define HAL_PWREx_ActivateOverDrive                   HAL_PWREx_EnableOverDrive
+#define HAL_PWREx_DeactivateOverDrive                 HAL_PWREx_DisableOverDrive
+#define HAL_PWREx_DisableSDADCAnalog                  HAL_PWREx_DisableSDADC
+#define HAL_PWREx_EnableSDADCAnalog                   HAL_PWREx_EnableSDADC
+#define HAL_PWREx_PVMConfig                           HAL_PWREx_ConfigPVM
+
+#define PWR_MODE_NORMAL                               PWR_PVD_MODE_NORMAL
+#define PWR_MODE_IT_RISING                            PWR_PVD_MODE_IT_RISING
+#define PWR_MODE_IT_FALLING                           PWR_PVD_MODE_IT_FALLING
+#define PWR_MODE_IT_RISING_FALLING                    PWR_PVD_MODE_IT_RISING_FALLING
+#define PWR_MODE_EVENT_RISING                         PWR_PVD_MODE_EVENT_RISING
+#define PWR_MODE_EVENT_FALLING                        PWR_PVD_MODE_EVENT_FALLING
+#define PWR_MODE_EVENT_RISING_FALLING                 PWR_PVD_MODE_EVENT_RISING_FALLING
+
+#define CR_OFFSET_BB                                  PWR_CR_OFFSET_BB
+#define CSR_OFFSET_BB                                 PWR_CSR_OFFSET_BB
+
+#define DBP_BitNumber                                 DBP_BIT_NUMBER
+#define PVDE_BitNumber                                PVDE_BIT_NUMBER
+#define PMODE_BitNumber                               PMODE_BIT_NUMBER
+#define EWUP_BitNumber                                EWUP_BIT_NUMBER
+#define FPDS_BitNumber                                FPDS_BIT_NUMBER
+#define ODEN_BitNumber                                ODEN_BIT_NUMBER
+#define ODSWEN_BitNumber                              ODSWEN_BIT_NUMBER
+#define MRLVDS_BitNumber                              MRLVDS_BIT_NUMBER
+#define LPLVDS_BitNumber                              LPLVDS_BIT_NUMBER
+#define BRE_BitNumber                                 BRE_BIT_NUMBER
+
+#define PWR_MODE_EVT                                  PWR_PVD_MODE_NORMAL
+ 
+ /**
+  * @}
+  */  
+  
+/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_SMBUS_Slave_Listen_IT          HAL_SMBUS_EnableListen_IT
+#define HAL_SMBUS_SlaveAddrCallback        HAL_SMBUS_AddrCallback         
+#define HAL_SMBUS_SlaveListenCpltCallback  HAL_SMBUS_ListenCpltCallback   
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_SPI_FlushRxFifo                HAL_SPIEx_FlushRxFifo
+/**
+  * @}
+  */  
+
+/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
+  * @{
+  */
+#define HAL_TIM_DMADelayPulseCplt                       TIM_DMADelayPulseCplt
+#define HAL_TIM_DMAError                                TIM_DMAError
+#define HAL_TIM_DMACaptureCplt                          TIM_DMACaptureCplt
+#define HAL_TIMEx_DMACommutationCplt                    TIMEx_DMACommutationCplt
+/**
+  * @}
+  */
+   
+/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
+  * @{
+  */ 
+#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
+  * @{
+  */ 
+#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
+/**
+  * @}
+  */  
+   
+  
+   /** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
+  * @{
+  */
+  
+/**
+  * @}
+  */
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define AES_IT_CC                      CRYP_IT_CC
+#define AES_IT_ERR                     CRYP_IT_ERR
+#define AES_FLAG_CCF                   CRYP_FLAG_CCF
+/**
+  * @}
+  */  
+  
+/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_GET_BOOT_MODE                   __HAL_SYSCFG_GET_BOOT_MODE
+#define __HAL_REMAPMEMORY_FLASH               __HAL_SYSCFG_REMAPMEMORY_FLASH
+#define __HAL_REMAPMEMORY_SYSTEMFLASH         __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
+#define __HAL_REMAPMEMORY_SRAM                __HAL_SYSCFG_REMAPMEMORY_SRAM
+#define __HAL_REMAPMEMORY_FMC                 __HAL_SYSCFG_REMAPMEMORY_FMC
+#define __HAL_REMAPMEMORY_FMC_SDRAM           __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM 
+#define __HAL_REMAPMEMORY_FSMC                __HAL_SYSCFG_REMAPMEMORY_FSMC
+#define __HAL_REMAPMEMORY_QUADSPI             __HAL_SYSCFG_REMAPMEMORY_QUADSPI
+#define __HAL_FMC_BANK                        __HAL_SYSCFG_FMC_BANK
+#define __HAL_GET_FLAG                        __HAL_SYSCFG_GET_FLAG
+#define __HAL_CLEAR_FLAG                      __HAL_SYSCFG_CLEAR_FLAG
+#define __HAL_VREFINT_OUT_ENABLE              __HAL_SYSCFG_VREFINT_OUT_ENABLE
+#define __HAL_VREFINT_OUT_DISABLE             __HAL_SYSCFG_VREFINT_OUT_DISABLE
+
+#define SYSCFG_FLAG_VREF_READY                SYSCFG_FLAG_VREFINT_READY
+#define SYSCFG_FLAG_RC48                      RCC_FLAG_HSI48
+#define IS_SYSCFG_FASTMODEPLUS_CONFIG         IS_I2C_FASTMODEPLUS
+#define UFB_MODE_BitNumber                    UFB_MODE_BIT_NUMBER
+#define CMP_PD_BitNumber                      CMP_PD_BIT_NUMBER
+
+/**
+  * @}
+  */
+
+   
+/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __ADC_ENABLE                                     __HAL_ADC_ENABLE
+#define __ADC_DISABLE                                    __HAL_ADC_DISABLE
+#define __HAL_ADC_ENABLING_CONDITIONS                    ADC_ENABLING_CONDITIONS
+#define __HAL_ADC_DISABLING_CONDITIONS                   ADC_DISABLING_CONDITIONS
+#define __HAL_ADC_IS_ENABLED                             ADC_IS_ENABLE
+#define __ADC_IS_ENABLED                                 ADC_IS_ENABLE
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR              ADC_IS_SOFTWARE_START_REGULAR
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED             ADC_IS_SOFTWARE_START_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR          ADC_IS_CONVERSION_ONGOING_REGULAR
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED         ADC_IS_CONVERSION_ONGOING_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING                  ADC_IS_CONVERSION_ONGOING
+#define __HAL_ADC_CLEAR_ERRORCODE                        ADC_CLEAR_ERRORCODE
+
+#define __HAL_ADC_GET_RESOLUTION                         ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR_RK                                ADC_JSQR_RK
+#define __HAL_ADC_CFGR_AWD1CH                            ADC_CFGR_AWD1CH_SHIFT
+#define __HAL_ADC_CFGR_AWD23CR                           ADC_CFGR_AWD23CR
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION            ADC_CFGR_INJECT_AUTO_CONVERSION
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE              ADC_CFGR_INJECT_CONTEXT_QUEUE
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS             ADC_CFGR_INJECT_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS                ADC_CFGR_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM                 ADC_CFGR_DISCONTINUOUS_NUM
+#define __HAL_ADC_CFGR_AUTOWAIT                          ADC_CFGR_AUTOWAIT
+#define __HAL_ADC_CFGR_CONTINUOUS                        ADC_CFGR_CONTINUOUS
+#define __HAL_ADC_CFGR_OVERRUN                           ADC_CFGR_OVERRUN
+#define __HAL_ADC_CFGR_DMACONTREQ                        ADC_CFGR_DMACONTREQ
+#define __HAL_ADC_CFGR_EXTSEL                            ADC_CFGR_EXTSEL_SET
+#define __HAL_ADC_JSQR_JEXTSEL                           ADC_JSQR_JEXTSEL_SET
+#define __HAL_ADC_OFR_CHANNEL                            ADC_OFR_CHANNEL
+#define __HAL_ADC_DIFSEL_CHANNEL                         ADC_DIFSEL_CHANNEL
+#define __HAL_ADC_CALFACT_DIFF_SET                       ADC_CALFACT_DIFF_SET
+#define __HAL_ADC_CALFACT_DIFF_GET                       ADC_CALFACT_DIFF_GET
+#define __HAL_ADC_TRX_HIGHTHRESHOLD                      ADC_TRX_HIGHTHRESHOLD
+
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION                ADC_OFFSET_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION         ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION        ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_COMMON_REGISTER                        ADC_COMMON_REGISTER
+#define __HAL_ADC_COMMON_CCR_MULTI                       ADC_COMMON_CCR_MULTI
+#define __HAL_ADC_MULTIMODE_IS_ENABLED                   ADC_MULTIMODE_IS_ENABLE
+#define __ADC_MULTIMODE_IS_ENABLED                       ADC_MULTIMODE_IS_ENABLE
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER        ADC_NONMULTIMODE_OR_MULTIMODEMASTER
+#define __HAL_ADC_COMMON_ADC_OTHER                       ADC_COMMON_ADC_OTHER
+#define __HAL_ADC_MULTI_SLAVE                            ADC_MULTI_SLAVE
+
+#define __HAL_ADC_SQR1_L                                 ADC_SQR1_L_SHIFT
+#define __HAL_ADC_JSQR_JL                                ADC_JSQR_JL_SHIFT
+#define __HAL_ADC_JSQR_RK_JL                             ADC_JSQR_RK_JL
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM                  ADC_CR1_DISCONTINUOUS_NUM
+#define __HAL_ADC_CR1_SCAN                               ADC_CR1_SCAN_SET
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE                   ADC_CONVCYCLES_MAX_RANGE
+#define __HAL_ADC_CLOCK_PRESCALER_RANGE                  ADC_CLOCK_PRESCALER_RANGE
+#define __HAL_ADC_GET_CLOCK_PRESCALER                    ADC_GET_CLOCK_PRESCALER
+
+#define __HAL_ADC_SQR1                                   ADC_SQR1
+#define __HAL_ADC_SMPR1                                  ADC_SMPR1
+#define __HAL_ADC_SMPR2                                  ADC_SMPR2
+#define __HAL_ADC_SQR3_RK                                ADC_SQR3_RK
+#define __HAL_ADC_SQR2_RK                                ADC_SQR2_RK
+#define __HAL_ADC_SQR1_RK                                ADC_SQR1_RK
+#define __HAL_ADC_CR2_CONTINUOUS                         ADC_CR2_CONTINUOUS
+#define __HAL_ADC_CR1_DISCONTINUOUS                      ADC_CR1_DISCONTINUOUS
+#define __HAL_ADC_CR1_SCANCONV                           ADC_CR1_SCANCONV
+#define __HAL_ADC_CR2_EOCSelection                       ADC_CR2_EOCSelection
+#define __HAL_ADC_CR2_DMAContReq                         ADC_CR2_DMAContReq
+#define __HAL_ADC_GET_RESOLUTION                         ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR                                   ADC_JSQR
+
+#define __HAL_ADC_CHSELR_CHANNEL                         ADC_CHSELR_CHANNEL
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS               ADC_CFGR1_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR1_AUTOOFF                          ADC_CFGR1_AUTOOFF
+#define __HAL_ADC_CFGR1_AUTOWAIT                         ADC_CFGR1_AUTOWAIT
+#define __HAL_ADC_CFGR1_CONTINUOUS                       ADC_CFGR1_CONTINUOUS
+#define __HAL_ADC_CFGR1_OVERRUN                          ADC_CFGR1_OVERRUN
+#define __HAL_ADC_CFGR1_SCANDIR                          ADC_CFGR1_SCANDIR
+#define __HAL_ADC_CFGR1_DMACONTREQ                       ADC_CFGR1_DMACONTREQ
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_DHR12R1_ALIGNEMENT                        DAC_DHR12R1_ALIGNMENT
+#define __HAL_DHR12R2_ALIGNEMENT                        DAC_DHR12R2_ALIGNMENT
+#define __HAL_DHR12RD_ALIGNEMENT                        DAC_DHR12RD_ALIGNMENT
+#define IS_DAC_GENERATE_WAVE                            IS_DAC_WAVE
+
+/**
+  * @}
+  */
+   
+/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
+#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
+#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
+#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
+#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
+#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
+#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
+#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
+#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
+#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
+#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
+#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
+#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
+#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
+#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
+#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
+
+#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
+#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
+#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
+#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
+#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
+#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
+#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
+#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
+#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
+#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
+#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
+#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
+#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
+#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
+
+
+#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
+#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
+#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
+#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
+#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
+#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
+#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
+#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
+#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
+#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
+#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
+#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
+#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
+#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#if defined(STM32F3)
+#define COMP_START                                       __HAL_COMP_ENABLE
+#define COMP_STOP                                        __HAL_COMP_DISABLE
+#define COMP_LOCK                                        __HAL_COMP_LOCK
+   
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F302xE) || defined(STM32F302xC)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP6_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP6_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP6_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP6_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP7_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_RISING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP7_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP7_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP7_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_ENABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP7_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_DISABLE_IT() : \
+                                                          ((__EXTILINE__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP7_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_GET_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP7_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP2) ? __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP3) ? __HAL_COMP_COMP3_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP4) ? __HAL_COMP_COMP4_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP5) ? __HAL_COMP_COMP5_EXTI_CLEAR_FLAG() : \
+                                                          ((__FLAG__)  == COMP_EXTI_LINE_COMP6) ? __HAL_COMP_COMP6_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP7_EXTI_CLEAR_FLAG())
+# endif
+# if defined(STM32F373xC) ||defined(STM32F378xx)
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+# endif
+#else
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__)   (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__)  (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__)          (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__)         (((__EXTILINE__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+                                                          __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__)               (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__)             (((__FLAG__)  == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+                                                          __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+#endif
+
+#define __HAL_COMP_GET_EXTI_LINE  COMP_GET_EXTI_LINE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
+                          ((WAVE) == DAC_WAVE_NOISE)|| \
+                          ((WAVE) == DAC_WAVE_TRIANGLE))
+  
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define IS_WRPAREA          IS_OB_WRPAREA
+#define IS_TYPEPROGRAM      IS_FLASH_TYPEPROGRAM
+#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
+#define IS_TYPEERASE        IS_FLASH_TYPEERASE
+#define IS_NBSECTORS        IS_FLASH_NBSECTORS
+#define IS_OB_WDG_SOURCE    IS_OB_IWDG_SOURCE
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
+  * @{
+  */
+  
+#define __HAL_I2C_RESET_CR2             I2C_RESET_CR2
+#define __HAL_I2C_GENERATE_START        I2C_GENERATE_START
+#define __HAL_I2C_FREQ_RANGE            I2C_FREQ_RANGE
+#define __HAL_I2C_RISE_TIME             I2C_RISE_TIME
+#define __HAL_I2C_SPEED_STANDARD        I2C_SPEED_STANDARD
+#define __HAL_I2C_SPEED_FAST            I2C_SPEED_FAST
+#define __HAL_I2C_SPEED                 I2C_SPEED
+#define __HAL_I2C_7BIT_ADD_WRITE        I2C_7BIT_ADD_WRITE
+#define __HAL_I2C_7BIT_ADD_READ         I2C_7BIT_ADD_READ
+#define __HAL_I2C_10BIT_ADDRESS         I2C_10BIT_ADDRESS
+#define __HAL_I2C_10BIT_HEADER_WRITE    I2C_10BIT_HEADER_WRITE
+#define __HAL_I2C_10BIT_HEADER_READ     I2C_10BIT_HEADER_READ
+#define __HAL_I2C_MEM_ADD_MSB           I2C_MEM_ADD_MSB
+#define __HAL_I2C_MEM_ADD_LSB           I2C_MEM_ADD_LSB
+#define __HAL_I2C_FREQRANGE             I2C_FREQRANGE
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
+  * @{
+  */
+  
+#define IS_I2S_INSTANCE                 IS_I2S_ALL_INSTANCE
+#define IS_I2S_INSTANCE_EXT             IS_I2S_ALL_INSTANCE_EXT
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
+  * @{
+  */
+  
+#define __IRDA_DISABLE                  __HAL_IRDA_DISABLE
+#define __IRDA_ENABLE                   __HAL_IRDA_ENABLE
+
+#define __HAL_IRDA_GETCLOCKSOURCE       IRDA_GETCLOCKSOURCE
+#define __HAL_IRDA_MASK_COMPUTATION     IRDA_MASK_COMPUTATION
+#define __IRDA_GETCLOCKSOURCE           IRDA_GETCLOCKSOURCE
+#define __IRDA_MASK_COMPUTATION         IRDA_MASK_COMPUTATION
+
+#define IS_IRDA_ONEBIT_SAMPLE           IS_IRDA_ONE_BIT_SAMPLE                  
+
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS  IWDG_ENABLE_WRITE_ACCESS
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_LPTIM_ENABLE_INTERRUPT    __HAL_LPTIM_ENABLE_IT
+#define __HAL_LPTIM_DISABLE_INTERRUPT   __HAL_LPTIM_DISABLE_IT
+#define __HAL_LPTIM_GET_ITSTATUS        __HAL_LPTIM_GET_IT_SOURCE
+
+/**
+  * @}
+  */
+  
+  
+/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __OPAMP_CSR_OPAXPD                OPAMP_CSR_OPAXPD
+#define __OPAMP_CSR_S3SELX                OPAMP_CSR_S3SELX
+#define __OPAMP_CSR_S4SELX                OPAMP_CSR_S4SELX
+#define __OPAMP_CSR_S5SELX                OPAMP_CSR_S5SELX
+#define __OPAMP_CSR_S6SELX                OPAMP_CSR_S6SELX
+#define __OPAMP_CSR_OPAXCAL_L             OPAMP_CSR_OPAXCAL_L
+#define __OPAMP_CSR_OPAXCAL_H             OPAMP_CSR_OPAXCAL_H
+#define __OPAMP_CSR_OPAXLPM               OPAMP_CSR_OPAXLPM
+#define __OPAMP_CSR_ALL_SWITCHES          OPAMP_CSR_ALL_SWITCHES
+#define __OPAMP_CSR_ANAWSELX              OPAMP_CSR_ANAWSELX
+#define __OPAMP_CSR_OPAXCALOUT            OPAMP_CSR_OPAXCALOUT
+#define __OPAMP_OFFSET_TRIM_BITSPOSITION  OPAMP_OFFSET_TRIM_BITSPOSITION
+#define __OPAMP_OFFSET_TRIM_SET           OPAMP_OFFSET_TRIM_SET
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_PVD_EVENT_DISABLE                                  __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PVD_EVENT_ENABLE                                   __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE                    __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE                     __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE                     __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE                      __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PVM_EVENT_DISABLE                                  __HAL_PWR_PVM_EVENT_DISABLE
+#define __HAL_PVM_EVENT_ENABLE                                   __HAL_PWR_PVM_EVENT_ENABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE                    __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE                     __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE                     __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE                      __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
+#define __HAL_PWR_INTERNALWAKEUP_DISABLE                         HAL_PWREx_DisableInternalWakeUpLine
+#define __HAL_PWR_INTERNALWAKEUP_ENABLE                          HAL_PWREx_EnableInternalWakeUpLine
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE                    HAL_PWREx_DisablePullUpPullDownConfig
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE                     HAL_PWREx_EnablePullUpPullDownConfig
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER()                  do { __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); } while(0)
+#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE                         __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE                          __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE                __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE                 __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE                 __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE                  __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER              __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER               __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVM_DISABLE()                                  do { HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4(); } while(0)
+#define __HAL_PWR_PVM_ENABLE()                                   do { HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4(); } while(0)
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE                  HAL_PWREx_DisableSRAM2ContentRetention
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE                   HAL_PWREx_EnableSRAM2ContentRetention
+#define __HAL_PWR_VDDIO2_DISABLE                                 HAL_PWREx_DisableVddIO2
+#define __HAL_PWR_VDDIO2_ENABLE                                  HAL_PWREx_EnableVddIO2
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER                 __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER           __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_VDDUSB_DISABLE                                 HAL_PWREx_DisableVddUSB
+#define __HAL_PWR_VDDUSB_ENABLE                                  HAL_PWREx_EnableVddUSB
+
+#if defined (STM32F4)
+#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD)         __HAL_PWR_PVD_EXTI_ENABLE_IT()
+#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD)        __HAL_PWR_PVD_EXTI_DISABLE_IT()
+#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD)          __HAL_PWR_PVD_EXTI_GET_FLAG()   
+#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD)        __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
+#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD)     __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_PVD_EXTI_CLEAR_FLAG                                __HAL_PWR_PVD_EXTI_CLEAR_FLAG
+#define __HAL_PVD_EXTI_DISABLE_IT                                __HAL_PWR_PVD_EXTI_DISABLE_IT
+#define __HAL_PVD_EXTI_ENABLE_IT                                 __HAL_PWR_PVD_EXTI_ENABLE_IT
+#define __HAL_PVD_EXTI_GENERATE_SWIT                             __HAL_PWR_PVD_EXTI_GENERATE_SWIT
+#define __HAL_PVD_EXTI_GET_FLAG                                  __HAL_PWR_PVD_EXTI_GET_FLAG 
+#endif /* STM32F4 */
+/**   
+  * @}
+  */  
+  
+  
+/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
+  * @{
+  */
+  
+#define RCC_StopWakeUpClock_MSI     RCC_STOP_WAKEUPCLOCK_MSI
+#define RCC_StopWakeUpClock_HSI     RCC_STOP_WAKEUPCLOCK_HSI
+
+#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+
+#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
+#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
+#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE
+#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE
+#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET
+#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET
+#define __ADC1_CLK_DISABLE        __HAL_RCC_ADC1_CLK_DISABLE
+#define __ADC1_CLK_ENABLE         __HAL_RCC_ADC1_CLK_ENABLE
+#define __ADC1_FORCE_RESET        __HAL_RCC_ADC1_FORCE_RESET
+#define __ADC1_RELEASE_RESET      __HAL_RCC_ADC1_RELEASE_RESET
+#define __ADC1_CLK_SLEEP_ENABLE   __HAL_RCC_ADC1_CLK_SLEEP_ENABLE  
+#define __ADC1_CLK_SLEEP_DISABLE  __HAL_RCC_ADC1_CLK_SLEEP_DISABLE  
+#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE
+#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE
+#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
+#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
+#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
+#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
+#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
+#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
+#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#define __CRYP_CLK_SLEEP_ENABLE      __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
+#define __CRYP_CLK_SLEEP_DISABLE  __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
+#define __CRYP_CLK_ENABLE  __HAL_RCC_CRYP_CLK_ENABLE
+#define __CRYP_CLK_DISABLE  __HAL_RCC_CRYP_CLK_DISABLE
+#define __CRYP_FORCE_RESET  __HAL_RCC_CRYP_FORCE_RESET
+#define __CRYP_RELEASE_RESET  __HAL_RCC_CRYP_RELEASE_RESET
+#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
+#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
+#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
+#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
+#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
+#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
+#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
+#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
+#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
+#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
+#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
+#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
+#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
+#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
+#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
+#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
+#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
+#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
+#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
+#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
+#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
+#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
+#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN_CLK_DISABLE         __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN_CLK_ENABLE          __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN_FORCE_RESET         __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN_RELEASE_RESET       __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
+#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
+#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
+#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
+#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
+#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
+#define __COMP_CLK_DISABLE        __HAL_RCC_COMP_CLK_DISABLE
+#define __COMP_CLK_ENABLE         __HAL_RCC_COMP_CLK_ENABLE
+#define __COMP_FORCE_RESET        __HAL_RCC_COMP_FORCE_RESET
+#define __COMP_RELEASE_RESET      __HAL_RCC_COMP_RELEASE_RESET
+#define __COMP_CLK_SLEEP_ENABLE   __HAL_RCC_COMP_CLK_SLEEP_ENABLE
+#define __COMP_CLK_SLEEP_DISABLE  __HAL_RCC_COMP_CLK_SLEEP_DISABLE
+#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
+#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
+#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
+#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
+#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
+#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
+#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
+#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
+#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
+#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
+#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
+#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
+#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
+#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
+#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
+#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
+#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
+#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
+#define __DBGMCU_CLK_ENABLE     __HAL_RCC_DBGMCU_CLK_ENABLE
+#define __DBGMCU_CLK_DISABLE     __HAL_RCC_DBGMCU_CLK_DISABLE
+#define __DBGMCU_FORCE_RESET    __HAL_RCC_DBGMCU_FORCE_RESET
+#define __DBGMCU_RELEASE_RESET  __HAL_RCC_DBGMCU_RELEASE_RESET
+#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
+#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
+#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
+#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
+#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
+#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
+#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
+#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
+#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
+#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
+#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
+#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
+#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
+#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
+#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
+#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
+#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
+#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
+#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
+#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
+#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
+#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
+#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
+#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
+#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
+#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
+#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
+#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
+#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
+#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
+#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
+#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
+#define __FLITF_CLK_DISABLE       __HAL_RCC_FLITF_CLK_DISABLE
+#define __FLITF_CLK_ENABLE        __HAL_RCC_FLITF_CLK_ENABLE
+#define __FLITF_FORCE_RESET       __HAL_RCC_FLITF_FORCE_RESET
+#define __FLITF_RELEASE_RESET     __HAL_RCC_FLITF_RELEASE_RESET
+#define __FLITF_CLK_SLEEP_ENABLE  __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
+#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
+#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
+#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
+#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
+#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
+#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
+#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
+#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
+#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
+#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
+#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
+#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
+#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
+#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
+#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
+#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
+#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
+#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
+#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
+#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
+#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
+#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
+#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
+#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
+#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
+#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
+#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
+#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
+#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
+#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
+#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
+#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
+#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
+#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
+#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
+#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
+#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
+#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
+#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
+#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
+#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
+#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
+#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
+#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
+#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
+#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
+#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
+#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
+#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
+#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
+#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
+#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
+#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
+#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
+#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
+#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
+#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
+#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
+#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
+#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
+#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
+#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
+#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
+#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
+#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
+#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
+#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
+#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
+#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
+#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
+#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
+#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
+#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
+#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
+#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
+#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
+#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
+#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
+#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
+#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
+#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
+#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
+#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
+#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
+#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
+#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
+#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
+#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
+#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
+#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
+#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
+#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
+#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
+#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
+#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
+#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
+#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
+#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
+#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
+#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
+#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
+#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
+#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
+#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
+#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
+#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
+#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
+#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
+#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
+#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
+#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
+#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
+#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
+#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
+#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
+#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
+#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
+#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
+#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
+#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
+#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
+#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
+#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
+#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
+#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
+#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
+#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
+#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
+#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
+#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
+#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
+#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
+#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
+#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
+#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
+#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
+#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
+#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
+#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
+#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
+#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
+#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
+#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
+#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
+#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
+#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
+#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
+#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
+#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
+#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
+#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
+#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
+#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
+#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
+#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
+#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
+#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
+#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
+#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
+#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
+#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
+#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
+#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
+#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
+#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
+#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
+#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
+#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
+#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
+#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
+#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
+#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
+#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
+#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
+#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
+#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
+#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
+#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
+#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
+#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
+#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
+#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
+#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
+#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
+#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
+#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
+#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
+#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
+#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
+#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
+#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
+#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
+#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
+#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
+#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
+#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
+#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
+#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
+#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
+#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
+#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
+#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
+#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
+#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
+#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
+#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
+#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
+#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
+#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
+#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
+#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
+#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
+#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
+#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
+#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
+#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
+#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
+#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
+#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
+#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
+#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
+#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
+#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
+#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
+#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
+#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
+#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
+#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
+#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
+#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
+#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
+#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
+#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
+#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
+#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
+#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
+#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
+#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
+#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
+#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
+#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
+#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
+#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
+#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
+#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
+#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
+#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
+#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
+#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
+#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
+#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
+#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
+#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
+#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
+#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
+#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
+#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
+#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
+#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
+#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
+#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
+#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
+#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
+#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
+#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
+#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
+#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
+#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
+#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
+#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
+#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
+#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
+#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
+#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
+#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
+#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
+#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
+#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
+#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
+#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
+#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
+#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
+#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
+#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
+#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
+#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
+#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
+#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
+#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
+#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
+#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
+#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
+#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
+#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
+#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
+#define __USART4_CLK_DISABLE        __HAL_RCC_USART4_CLK_DISABLE
+#define __USART4_CLK_ENABLE         __HAL_RCC_USART4_CLK_ENABLE
+#define __USART4_CLK_SLEEP_ENABLE   __HAL_RCC_USART4_CLK_SLEEP_ENABLE
+#define __USART4_CLK_SLEEP_DISABLE  __HAL_RCC_USART4_CLK_SLEEP_DISABLE 
+#define __USART4_FORCE_RESET        __HAL_RCC_USART4_FORCE_RESET
+#define __USART4_RELEASE_RESET      __HAL_RCC_USART4_RELEASE_RESET
+#define __USART5_CLK_DISABLE        __HAL_RCC_USART5_CLK_DISABLE
+#define __USART5_CLK_ENABLE         __HAL_RCC_USART5_CLK_ENABLE
+#define __USART5_CLK_SLEEP_ENABLE   __HAL_RCC_USART5_CLK_SLEEP_ENABLE
+#define __USART5_CLK_SLEEP_DISABLE  __HAL_RCC_USART5_CLK_SLEEP_DISABLE 
+#define __USART5_FORCE_RESET        __HAL_RCC_USART5_FORCE_RESET
+#define __USART5_RELEASE_RESET      __HAL_RCC_USART5_RELEASE_RESET
+#define __USART7_CLK_DISABLE        __HAL_RCC_USART7_CLK_DISABLE
+#define __USART7_CLK_ENABLE         __HAL_RCC_USART7_CLK_ENABLE
+#define __USART7_FORCE_RESET        __HAL_RCC_USART7_FORCE_RESET
+#define __USART7_RELEASE_RESET      __HAL_RCC_USART7_RELEASE_RESET
+#define __USART8_CLK_DISABLE        __HAL_RCC_USART8_CLK_DISABLE
+#define __USART8_CLK_ENABLE         __HAL_RCC_USART8_CLK_ENABLE
+#define __USART8_FORCE_RESET        __HAL_RCC_USART8_FORCE_RESET
+#define __USART8_RELEASE_RESET      __HAL_RCC_USART8_RELEASE_RESET
+#define __USB_CLK_DISABLE         __HAL_RCC_USB_CLK_DISABLE
+#define __USB_CLK_ENABLE          __HAL_RCC_USB_CLK_ENABLE
+#define __USB_FORCE_RESET         __HAL_RCC_USB_FORCE_RESET
+#define __USB_CLK_SLEEP_ENABLE    __HAL_RCC_USB_CLK_SLEEP_ENABLE
+#define __USB_CLK_SLEEP_DISABLE   __HAL_RCC_USB_CLK_SLEEP_DISABLE
+#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
+#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
+#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
+#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
+#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
+#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
+#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
+#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
+#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
+#define __TIM21_CLK_ENABLE   __HAL_RCC_TIM21_CLK_ENABLE
+#define __TIM21_CLK_DISABLE   __HAL_RCC_TIM21_CLK_DISABLE
+#define __TIM21_FORCE_RESET   __HAL_RCC_TIM21_FORCE_RESET
+#define __TIM21_RELEASE_RESET  __HAL_RCC_TIM21_RELEASE_RESET
+#define __TIM21_CLK_SLEEP_ENABLE   __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
+#define __TIM21_CLK_SLEEP_DISABLE   __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
+#define __TIM22_CLK_ENABLE   __HAL_RCC_TIM22_CLK_ENABLE
+#define __TIM22_CLK_DISABLE   __HAL_RCC_TIM22_CLK_DISABLE
+#define __TIM22_FORCE_RESET   __HAL_RCC_TIM22_FORCE_RESET
+#define __TIM22_RELEASE_RESET  __HAL_RCC_TIM22_RELEASE_RESET
+#define __TIM22_CLK_SLEEP_ENABLE   __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
+#define __TIM22_CLK_SLEEP_DISABLE   __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
+#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
+#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
+#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
+#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
+#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
+#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
+#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
+#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
+
+#define __USB_OTG_FS_FORCE_RESET  __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __USB_OTG_FS_RELEASE_RESET  __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
+#define __USB_OTG_HS_CLK_DISABLE  __HAL_RCC_USB_OTG_HS_CLK_DISABLE
+#define __USB_OTG_HS_CLK_ENABLE          __HAL_RCC_USB_OTG_HS_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_ENABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_DISABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE  
+#define __TIM9_CLK_SLEEP_ENABLE          __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
+#define __TIM9_CLK_SLEEP_DISABLE  __HAL_RCC_TIM9_CLK_SLEEP_DISABLE  
+#define __TIM10_CLK_SLEEP_ENABLE  __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
+#define __TIM10_CLK_SLEEP_DISABLE  __HAL_RCC_TIM10_CLK_SLEEP_DISABLE  
+#define __TIM11_CLK_SLEEP_ENABLE  __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
+#define __TIM11_CLK_SLEEP_DISABLE  __HAL_RCC_TIM11_CLK_SLEEP_DISABLE  
+#define __ETHMACPTP_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
+#define __ETHMACPTP_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_ENABLE          __HAL_RCC_ETHMACPTP_CLK_ENABLE
+#define __ETHMACPTP_CLK_DISABLE          __HAL_RCC_ETHMACPTP_CLK_DISABLE  
+#define __HASH_CLK_ENABLE          __HAL_RCC_HASH_CLK_ENABLE
+#define __HASH_FORCE_RESET          __HAL_RCC_HASH_FORCE_RESET
+#define __HASH_RELEASE_RESET          __HAL_RCC_HASH_RELEASE_RESET
+#define __HASH_CLK_SLEEP_ENABLE          __HAL_RCC_HASH_CLK_SLEEP_ENABLE
+#define __HASH_CLK_SLEEP_DISABLE  __HAL_RCC_HASH_CLK_SLEEP_DISABLE
+#define __HASH_CLK_DISABLE            __HAL_RCC_HASH_CLK_DISABLE  
+#define __SPI5_CLK_ENABLE          __HAL_RCC_SPI5_CLK_ENABLE
+#define __SPI5_CLK_DISABLE              __HAL_RCC_SPI5_CLK_DISABLE
+#define __SPI5_FORCE_RESET          __HAL_RCC_SPI5_FORCE_RESET
+#define __SPI5_RELEASE_RESET          __HAL_RCC_SPI5_RELEASE_RESET
+#define __SPI5_CLK_SLEEP_ENABLE          __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
+#define __SPI5_CLK_SLEEP_DISABLE  __HAL_RCC_SPI5_CLK_SLEEP_DISABLE  
+#define __SPI6_CLK_ENABLE          __HAL_RCC_SPI6_CLK_ENABLE
+#define __SPI6_CLK_DISABLE          __HAL_RCC_SPI6_CLK_DISABLE
+#define __SPI6_FORCE_RESET          __HAL_RCC_SPI6_FORCE_RESET
+#define __SPI6_RELEASE_RESET         __HAL_RCC_SPI6_RELEASE_RESET
+#define __SPI6_CLK_SLEEP_ENABLE          __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
+#define __SPI6_CLK_SLEEP_DISABLE  __HAL_RCC_SPI6_CLK_SLEEP_DISABLE  
+#define __LTDC_CLK_ENABLE          __HAL_RCC_LTDC_CLK_ENABLE
+#define __LTDC_CLK_DISABLE          __HAL_RCC_LTDC_CLK_DISABLE
+#define __LTDC_FORCE_RESET          __HAL_RCC_LTDC_FORCE_RESET
+#define __LTDC_RELEASE_RESET          __HAL_RCC_LTDC_RELEASE_RESET
+#define __LTDC_CLK_SLEEP_ENABLE          __HAL_RCC_LTDC_CLK_SLEEP_ENABLE  
+#define __ETHMAC_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE  
+#define __ETHMACTX_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
+#define __ETHMACTX_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE  
+#define __ETHMACRX_CLK_SLEEP_ENABLE  __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
+#define __ETHMACRX_CLK_SLEEP_DISABLE  __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE  
+#define __TIM12_CLK_SLEEP_ENABLE  __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
+#define __TIM12_CLK_SLEEP_DISABLE  __HAL_RCC_TIM12_CLK_SLEEP_DISABLE  
+#define __TIM13_CLK_SLEEP_ENABLE  __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
+#define __TIM13_CLK_SLEEP_DISABLE  __HAL_RCC_TIM13_CLK_SLEEP_DISABLE  
+#define __TIM14_CLK_SLEEP_ENABLE  __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
+#define __TIM14_CLK_SLEEP_DISABLE  __HAL_RCC_TIM14_CLK_SLEEP_DISABLE  
+#define __BKPSRAM_CLK_ENABLE          __HAL_RCC_BKPSRAM_CLK_ENABLE
+#define __BKPSRAM_CLK_DISABLE          __HAL_RCC_BKPSRAM_CLK_DISABLE
+#define __BKPSRAM_CLK_SLEEP_ENABLE  __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
+#define __BKPSRAM_CLK_SLEEP_DISABLE  __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE  
+#define __CCMDATARAMEN_CLK_ENABLE  __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
+#define __CCMDATARAMEN_CLK_DISABLE  __HAL_RCC_CCMDATARAMEN_CLK_DISABLE  
+#define __USART6_CLK_ENABLE          __HAL_RCC_USART6_CLK_ENABLE
+#define __USART6_CLK_DISABLE          __HAL_RCC_USART6_CLK_DISABLE
+#define __USART6_FORCE_RESET        __HAL_RCC_USART6_FORCE_RESET
+#define __USART6_RELEASE_RESET        __HAL_RCC_USART6_RELEASE_RESET
+#define __USART6_CLK_SLEEP_ENABLE  __HAL_RCC_USART6_CLK_SLEEP_ENABLE
+#define __USART6_CLK_SLEEP_DISABLE  __HAL_RCC_USART6_CLK_SLEEP_DISABLE  
+#define __SPI4_CLK_ENABLE          __HAL_RCC_SPI4_CLK_ENABLE
+#define __SPI4_CLK_DISABLE          __HAL_RCC_SPI4_CLK_DISABLE
+#define __SPI4_FORCE_RESET          __HAL_RCC_SPI4_FORCE_RESET
+#define __SPI4_RELEASE_RESET        __HAL_RCC_SPI4_RELEASE_RESET
+#define __SPI4_CLK_SLEEP_ENABLE   __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
+#define __SPI4_CLK_SLEEP_DISABLE  __HAL_RCC_SPI4_CLK_SLEEP_DISABLE  
+#define __GPIOI_CLK_ENABLE          __HAL_RCC_GPIOI_CLK_ENABLE
+#define __GPIOI_CLK_DISABLE          __HAL_RCC_GPIOI_CLK_DISABLE
+#define __GPIOI_FORCE_RESET          __HAL_RCC_GPIOI_FORCE_RESET
+#define __GPIOI_RELEASE_RESET          __HAL_RCC_GPIOI_RELEASE_RESET
+#define __GPIOI_CLK_SLEEP_ENABLE  __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
+#define __GPIOI_CLK_SLEEP_DISABLE  __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE  
+#define __GPIOJ_CLK_ENABLE          __HAL_RCC_GPIOJ_CLK_ENABLE
+#define __GPIOJ_CLK_DISABLE          __HAL_RCC_GPIOJ_CLK_DISABLE
+#define __GPIOJ_FORCE_RESET         __HAL_RCC_GPIOJ_FORCE_RESET
+#define __GPIOJ_RELEASE_RESET          __HAL_RCC_GPIOJ_RELEASE_RESET
+#define __GPIOJ_CLK_SLEEP_ENABLE  __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
+#define __GPIOJ_CLK_SLEEP_DISABLE  __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE  
+#define __GPIOK_CLK_ENABLE          __HAL_RCC_GPIOK_CLK_ENABLE
+#define __GPIOK_CLK_DISABLE          __HAL_RCC_GPIOK_CLK_DISABLE
+#define __GPIOK_RELEASE_RESET          __HAL_RCC_GPIOK_RELEASE_RESET
+#define __GPIOK_CLK_SLEEP_ENABLE  __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
+#define __GPIOK_CLK_SLEEP_DISABLE  __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE  
+#define __ETH_CLK_ENABLE          __HAL_RCC_ETH_CLK_ENABLE
+#define __ETH_CLK_DISABLE          __HAL_RCC_ETH_CLK_DISABLE  
+#define __DCMI_CLK_ENABLE          __HAL_RCC_DCMI_CLK_ENABLE
+#define __DCMI_CLK_DISABLE          __HAL_RCC_DCMI_CLK_DISABLE
+#define __DCMI_FORCE_RESET          __HAL_RCC_DCMI_FORCE_RESET
+#define __DCMI_RELEASE_RESET          __HAL_RCC_DCMI_RELEASE_RESET
+#define __DCMI_CLK_SLEEP_ENABLE   __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
+#define __DCMI_CLK_SLEEP_DISABLE  __HAL_RCC_DCMI_CLK_SLEEP_DISABLE  
+#define __UART7_CLK_ENABLE          __HAL_RCC_UART7_CLK_ENABLE
+#define __UART7_CLK_DISABLE          __HAL_RCC_UART7_CLK_DISABLE
+#define __UART7_RELEASE_RESET       __HAL_RCC_UART7_RELEASE_RESET
+#define __UART7_FORCE_RESET       __HAL_RCC_UART7_FORCE_RESET
+#define __UART7_CLK_SLEEP_ENABLE  __HAL_RCC_UART7_CLK_SLEEP_ENABLE
+#define __UART7_CLK_SLEEP_DISABLE  __HAL_RCC_UART7_CLK_SLEEP_DISABLE  
+#define __UART8_CLK_ENABLE          __HAL_RCC_UART8_CLK_ENABLE
+#define __UART8_CLK_DISABLE          __HAL_RCC_UART8_CLK_DISABLE
+#define __UART8_FORCE_RESET          __HAL_RCC_UART8_FORCE_RESET
+#define __UART8_RELEASE_RESET          __HAL_RCC_UART8_RELEASE_RESET
+#define __UART8_CLK_SLEEP_ENABLE  __HAL_RCC_UART8_CLK_SLEEP_ENABLE
+#define __UART8_CLK_SLEEP_DISABLE  __HAL_RCC_UART8_CLK_SLEEP_DISABLE  
+#define __OTGHS_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __OTGHS_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __OTGHS_FORCE_RESET          __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __OTGHS_RELEASE_RESET          __HAL_RCC_USB_OTG_HS_RELEASE_RESET  
+#define __OTGHSULPI_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __OTGHSULPI_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE  __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
+#define __HAL_RCC_OTGHS_FORCE_RESET          __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __HAL_RCC_OTGHS_RELEASE_RESET          __HAL_RCC_USB_OTG_HS_RELEASE_RESET  
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE      __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE     __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE 
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED  __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
+#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED   
+#define __CRYP_FORCE_RESET             __HAL_RCC_CRYP_FORCE_RESET  
+#define __SRAM3_CLK_SLEEP_ENABLE       __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE  
+#define __CAN2_CLK_SLEEP_ENABLE        __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_DISABLE       __HAL_RCC_CAN2_CLK_SLEEP_DISABLE  
+#define __DAC_CLK_SLEEP_ENABLE         __HAL_RCC_DAC_CLK_SLEEP_ENABLE
+#define __DAC_CLK_SLEEP_DISABLE        __HAL_RCC_DAC_CLK_SLEEP_DISABLE  
+#define __ADC2_CLK_SLEEP_ENABLE        __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
+#define __ADC2_CLK_SLEEP_DISABLE       __HAL_RCC_ADC2_CLK_SLEEP_DISABLE  
+#define __ADC3_CLK_SLEEP_ENABLE        __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
+#define __ADC3_CLK_SLEEP_DISABLE       __HAL_RCC_ADC3_CLK_SLEEP_DISABLE  
+#define __FSMC_FORCE_RESET             __HAL_RCC_FSMC_FORCE_RESET
+#define __FSMC_RELEASE_RESET           __HAL_RCC_FSMC_RELEASE_RESET
+#define __FSMC_CLK_SLEEP_ENABLE        __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
+#define __FSMC_CLK_SLEEP_DISABLE       __HAL_RCC_FSMC_CLK_SLEEP_DISABLE  
+#define __SDIO_FORCE_RESET             __HAL_RCC_SDIO_FORCE_RESET
+#define __SDIO_RELEASE_RESET           __HAL_RCC_SDIO_RELEASE_RESET
+#define __SDIO_CLK_SLEEP_DISABLE       __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __SDIO_CLK_SLEEP_ENABLE        __HAL_RCC_SDIO_CLK_SLEEP_ENABLE  
+#define __DMA2D_CLK_ENABLE             __HAL_RCC_DMA2D_CLK_ENABLE
+#define __DMA2D_CLK_DISABLE            __HAL_RCC_DMA2D_CLK_DISABLE
+#define __DMA2D_FORCE_RESET            __HAL_RCC_DMA2D_FORCE_RESET
+#define __DMA2D_RELEASE_RESET          __HAL_RCC_DMA2D_RELEASE_RESET
+#define __DMA2D_CLK_SLEEP_ENABLE       __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_SLEEP_DISABLE      __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
+
+/* alias define maintained for legacy */
+#define __HAL_RCC_OTGFS_FORCE_RESET    __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __HAL_RCC_OTGFS_RELEASE_RESET  __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+
+#define __ADC12_CLK_ENABLE          __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE         __HAL_RCC_ADC12_CLK_DISABLE
+#define __ADC34_CLK_ENABLE          __HAL_RCC_ADC34_CLK_ENABLE
+#define __ADC34_CLK_DISABLE         __HAL_RCC_ADC34_CLK_DISABLE
+#define __ADC12_CLK_ENABLE          __HAL_RCC_ADC12_CLK_ENABLE
+#define __ADC12_CLK_DISABLE         __HAL_RCC_ADC12_CLK_DISABLE
+#define __DAC2_CLK_ENABLE           __HAL_RCC_DAC2_CLK_ENABLE
+#define __DAC2_CLK_DISABLE          __HAL_RCC_DAC2_CLK_DISABLE
+#define __TIM18_CLK_ENABLE          __HAL_RCC_TIM18_CLK_ENABLE
+#define __TIM18_CLK_DISABLE         __HAL_RCC_TIM18_CLK_DISABLE
+#define __TIM19_CLK_ENABLE          __HAL_RCC_TIM19_CLK_ENABLE
+#define __TIM19_CLK_DISABLE         __HAL_RCC_TIM19_CLK_DISABLE
+#define __TIM20_CLK_ENABLE          __HAL_RCC_TIM20_CLK_ENABLE
+#define __TIM20_CLK_DISABLE         __HAL_RCC_TIM20_CLK_DISABLE
+#define __HRTIM1_CLK_ENABLE         __HAL_RCC_HRTIM1_CLK_ENABLE
+#define __HRTIM1_CLK_DISABLE        __HAL_RCC_HRTIM1_CLK_DISABLE
+#define __SDADC1_CLK_ENABLE         __HAL_RCC_SDADC1_CLK_ENABLE
+#define __SDADC2_CLK_ENABLE         __HAL_RCC_SDADC2_CLK_ENABLE
+#define __SDADC3_CLK_ENABLE         __HAL_RCC_SDADC3_CLK_ENABLE
+#define __SDADC1_CLK_DISABLE        __HAL_RCC_SDADC1_CLK_DISABLE
+#define __SDADC2_CLK_DISABLE        __HAL_RCC_SDADC2_CLK_DISABLE
+#define __SDADC3_CLK_DISABLE        __HAL_RCC_SDADC3_CLK_DISABLE
+
+#define __ADC12_FORCE_RESET         __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET       __HAL_RCC_ADC12_RELEASE_RESET
+#define __ADC34_FORCE_RESET         __HAL_RCC_ADC34_FORCE_RESET
+#define __ADC34_RELEASE_RESET       __HAL_RCC_ADC34_RELEASE_RESET
+#define __ADC12_FORCE_RESET         __HAL_RCC_ADC12_FORCE_RESET
+#define __ADC12_RELEASE_RESET       __HAL_RCC_ADC12_RELEASE_RESET
+#define __DAC2_FORCE_RESET          __HAL_RCC_DAC2_FORCE_RESET
+#define __DAC2_RELEASE_RESET        __HAL_RCC_DAC2_RELEASE_RESET
+#define __TIM18_FORCE_RESET         __HAL_RCC_TIM18_FORCE_RESET
+#define __TIM18_RELEASE_RESET       __HAL_RCC_TIM18_RELEASE_RESET
+#define __TIM19_FORCE_RESET         __HAL_RCC_TIM19_FORCE_RESET
+#define __TIM19_RELEASE_RESET       __HAL_RCC_TIM19_RELEASE_RESET
+#define __TIM20_FORCE_RESET         __HAL_RCC_TIM20_FORCE_RESET
+#define __TIM20_RELEASE_RESET       __HAL_RCC_TIM20_RELEASE_RESET
+#define __HRTIM1_FORCE_RESET        __HAL_RCC_HRTIM1_FORCE_RESET
+#define __HRTIM1_RELEASE_RESET      __HAL_RCC_HRTIM1_RELEASE_RESET
+#define __SDADC1_FORCE_RESET        __HAL_RCC_SDADC1_FORCE_RESET
+#define __SDADC2_FORCE_RESET        __HAL_RCC_SDADC2_FORCE_RESET
+#define __SDADC3_FORCE_RESET        __HAL_RCC_SDADC3_FORCE_RESET
+#define __SDADC1_RELEASE_RESET      __HAL_RCC_SDADC1_RELEASE_RESET
+#define __SDADC2_RELEASE_RESET      __HAL_RCC_SDADC2_RELEASE_RESET
+#define __SDADC3_RELEASE_RESET      __HAL_RCC_SDADC3_RELEASE_RESET
+
+#define __ADC1_IS_CLK_ENABLED       __HAL_RCC_ADC1_IS_CLK_ENABLED
+#define __ADC1_IS_CLK_DISABLED      __HAL_RCC_ADC1_IS_CLK_DISABLED
+#define __ADC12_IS_CLK_ENABLED      __HAL_RCC_ADC12_IS_CLK_ENABLED
+#define __ADC12_IS_CLK_DISABLED     __HAL_RCC_ADC12_IS_CLK_DISABLED
+#define __ADC34_IS_CLK_ENABLED      __HAL_RCC_ADC34_IS_CLK_ENABLED
+#define __ADC34_IS_CLK_DISABLED     __HAL_RCC_ADC34_IS_CLK_DISABLED
+#define __CEC_IS_CLK_ENABLED        __HAL_RCC_CEC_IS_CLK_ENABLED
+#define __CEC_IS_CLK_DISABLED       __HAL_RCC_CEC_IS_CLK_DISABLED
+#define __CRC_IS_CLK_ENABLED        __HAL_RCC_CRC_IS_CLK_ENABLED
+#define __CRC_IS_CLK_DISABLED       __HAL_RCC_CRC_IS_CLK_DISABLED
+#define __DAC1_IS_CLK_ENABLED       __HAL_RCC_DAC1_IS_CLK_ENABLED
+#define __DAC1_IS_CLK_DISABLED      __HAL_RCC_DAC1_IS_CLK_DISABLED
+#define __DAC2_IS_CLK_ENABLED       __HAL_RCC_DAC2_IS_CLK_ENABLED
+#define __DAC2_IS_CLK_DISABLED      __HAL_RCC_DAC2_IS_CLK_DISABLED
+#define __DMA1_IS_CLK_ENABLED       __HAL_RCC_DMA1_IS_CLK_ENABLED
+#define __DMA1_IS_CLK_DISABLED      __HAL_RCC_DMA1_IS_CLK_DISABLED
+#define __DMA2_IS_CLK_ENABLED       __HAL_RCC_DMA2_IS_CLK_ENABLED
+#define __DMA2_IS_CLK_DISABLED      __HAL_RCC_DMA2_IS_CLK_DISABLED
+#define __FLITF_IS_CLK_ENABLED      __HAL_RCC_FLITF_IS_CLK_ENABLED
+#define __FLITF_IS_CLK_DISABLED     __HAL_RCC_FLITF_IS_CLK_DISABLED
+#define __FMC_IS_CLK_ENABLED        __HAL_RCC_FMC_IS_CLK_ENABLED
+#define __FMC_IS_CLK_DISABLED       __HAL_RCC_FMC_IS_CLK_DISABLED
+#define __GPIOA_IS_CLK_ENABLED      __HAL_RCC_GPIOA_IS_CLK_ENABLED
+#define __GPIOA_IS_CLK_DISABLED     __HAL_RCC_GPIOA_IS_CLK_DISABLED
+#define __GPIOB_IS_CLK_ENABLED      __HAL_RCC_GPIOB_IS_CLK_ENABLED
+#define __GPIOB_IS_CLK_DISABLED     __HAL_RCC_GPIOB_IS_CLK_DISABLED
+#define __GPIOC_IS_CLK_ENABLED      __HAL_RCC_GPIOC_IS_CLK_ENABLED
+#define __GPIOC_IS_CLK_DISABLED     __HAL_RCC_GPIOC_IS_CLK_DISABLED
+#define __GPIOD_IS_CLK_ENABLED      __HAL_RCC_GPIOD_IS_CLK_ENABLED
+#define __GPIOD_IS_CLK_DISABLED     __HAL_RCC_GPIOD_IS_CLK_DISABLED
+#define __GPIOE_IS_CLK_ENABLED      __HAL_RCC_GPIOE_IS_CLK_ENABLED
+#define __GPIOE_IS_CLK_DISABLED     __HAL_RCC_GPIOE_IS_CLK_DISABLED
+#define __GPIOF_IS_CLK_ENABLED      __HAL_RCC_GPIOF_IS_CLK_ENABLED
+#define __GPIOF_IS_CLK_DISABLED     __HAL_RCC_GPIOF_IS_CLK_DISABLED
+#define __GPIOG_IS_CLK_ENABLED      __HAL_RCC_GPIOG_IS_CLK_ENABLED
+#define __GPIOG_IS_CLK_DISABLED     __HAL_RCC_GPIOG_IS_CLK_DISABLED
+#define __GPIOH_IS_CLK_ENABLED      __HAL_RCC_GPIOH_IS_CLK_ENABLED
+#define __GPIOH_IS_CLK_DISABLED     __HAL_RCC_GPIOH_IS_CLK_DISABLED
+#define __HRTIM1_IS_CLK_ENABLED     __HAL_RCC_HRTIM1_IS_CLK_ENABLED
+#define __HRTIM1_IS_CLK_DISABLED    __HAL_RCC_HRTIM1_IS_CLK_DISABLED
+#define __I2C1_IS_CLK_ENABLED       __HAL_RCC_I2C1_IS_CLK_ENABLED
+#define __I2C1_IS_CLK_DISABLED      __HAL_RCC_I2C1_IS_CLK_DISABLED
+#define __I2C2_IS_CLK_ENABLED       __HAL_RCC_I2C2_IS_CLK_ENABLED
+#define __I2C2_IS_CLK_DISABLED      __HAL_RCC_I2C2_IS_CLK_DISABLED
+#define __I2C3_IS_CLK_ENABLED       __HAL_RCC_I2C3_IS_CLK_ENABLED
+#define __I2C3_IS_CLK_DISABLED      __HAL_RCC_I2C3_IS_CLK_DISABLED
+#define __PWR_IS_CLK_ENABLED        __HAL_RCC_PWR_IS_CLK_ENABLED
+#define __PWR_IS_CLK_DISABLED       __HAL_RCC_PWR_IS_CLK_DISABLED
+#define __SYSCFG_IS_CLK_ENABLED     __HAL_RCC_SYSCFG_IS_CLK_ENABLED
+#define __SYSCFG_IS_CLK_DISABLED    __HAL_RCC_SYSCFG_IS_CLK_DISABLED
+#define __SPI1_IS_CLK_ENABLED       __HAL_RCC_SPI1_IS_CLK_ENABLED
+#define __SPI1_IS_CLK_DISABLED      __HAL_RCC_SPI1_IS_CLK_DISABLED
+#define __SPI2_IS_CLK_ENABLED       __HAL_RCC_SPI2_IS_CLK_ENABLED
+#define __SPI2_IS_CLK_DISABLED      __HAL_RCC_SPI2_IS_CLK_DISABLED
+#define __SPI3_IS_CLK_ENABLED       __HAL_RCC_SPI3_IS_CLK_ENABLED
+#define __SPI3_IS_CLK_DISABLED      __HAL_RCC_SPI3_IS_CLK_DISABLED
+#define __SPI4_IS_CLK_ENABLED       __HAL_RCC_SPI4_IS_CLK_ENABLED
+#define __SPI4_IS_CLK_DISABLED      __HAL_RCC_SPI4_IS_CLK_DISABLED
+#define __SDADC1_IS_CLK_ENABLED     __HAL_RCC_SDADC1_IS_CLK_ENABLED
+#define __SDADC1_IS_CLK_DISABLED    __HAL_RCC_SDADC1_IS_CLK_DISABLED
+#define __SDADC2_IS_CLK_ENABLED     __HAL_RCC_SDADC2_IS_CLK_ENABLED
+#define __SDADC2_IS_CLK_DISABLED    __HAL_RCC_SDADC2_IS_CLK_DISABLED
+#define __SDADC3_IS_CLK_ENABLED     __HAL_RCC_SDADC3_IS_CLK_ENABLED
+#define __SDADC3_IS_CLK_DISABLED    __HAL_RCC_SDADC3_IS_CLK_DISABLED
+#define __SRAM_IS_CLK_ENABLED       __HAL_RCC_SRAM_IS_CLK_ENABLED
+#define __SRAM_IS_CLK_DISABLED      __HAL_RCC_SRAM_IS_CLK_DISABLED
+#define __TIM1_IS_CLK_ENABLED       __HAL_RCC_TIM1_IS_CLK_ENABLED
+#define __TIM1_IS_CLK_DISABLED      __HAL_RCC_TIM1_IS_CLK_DISABLED
+#define __TIM2_IS_CLK_ENABLED       __HAL_RCC_TIM2_IS_CLK_ENABLED
+#define __TIM2_IS_CLK_DISABLED      __HAL_RCC_TIM2_IS_CLK_DISABLED
+#define __TIM3_IS_CLK_ENABLED       __HAL_RCC_TIM3_IS_CLK_ENABLED
+#define __TIM3_IS_CLK_DISABLED      __HAL_RCC_TIM3_IS_CLK_DISABLED
+#define __TIM4_IS_CLK_ENABLED       __HAL_RCC_TIM4_IS_CLK_ENABLED
+#define __TIM4_IS_CLK_DISABLED      __HAL_RCC_TIM4_IS_CLK_DISABLED
+#define __TIM5_IS_CLK_ENABLED       __HAL_RCC_TIM5_IS_CLK_ENABLED
+#define __TIM5_IS_CLK_DISABLED      __HAL_RCC_TIM5_IS_CLK_DISABLED
+#define __TIM6_IS_CLK_ENABLED       __HAL_RCC_TIM6_IS_CLK_ENABLED
+#define __TIM6_IS_CLK_DISABLED      __HAL_RCC_TIM6_IS_CLK_DISABLED
+#define __TIM7_IS_CLK_ENABLED       __HAL_RCC_TIM7_IS_CLK_ENABLED
+#define __TIM7_IS_CLK_DISABLED      __HAL_RCC_TIM7_IS_CLK_DISABLED
+#define __TIM8_IS_CLK_ENABLED       __HAL_RCC_TIM8_IS_CLK_ENABLED
+#define __TIM8_IS_CLK_DISABLED      __HAL_RCC_TIM8_IS_CLK_DISABLED
+#define __TIM12_IS_CLK_ENABLED      __HAL_RCC_TIM12_IS_CLK_ENABLED
+#define __TIM12_IS_CLK_DISABLED     __HAL_RCC_TIM12_IS_CLK_DISABLED
+#define __TIM13_IS_CLK_ENABLED      __HAL_RCC_TIM13_IS_CLK_ENABLED
+#define __TIM13_IS_CLK_DISABLED     __HAL_RCC_TIM13_IS_CLK_DISABLED
+#define __TIM14_IS_CLK_ENABLED      __HAL_RCC_TIM14_IS_CLK_ENABLED
+#define __TIM14_IS_CLK_DISABLED     __HAL_RCC_TIM14_IS_CLK_DISABLED
+#define __TIM15_IS_CLK_ENABLED      __HAL_RCC_TIM15_IS_CLK_ENABLED
+#define __TIM15_IS_CLK_DISABLED     __HAL_RCC_TIM15_IS_CLK_DISABLED
+#define __TIM16_IS_CLK_ENABLED      __HAL_RCC_TIM16_IS_CLK_ENABLED
+#define __TIM16_IS_CLK_DISABLED     __HAL_RCC_TIM16_IS_CLK_DISABLED
+#define __TIM17_IS_CLK_ENABLED      __HAL_RCC_TIM17_IS_CLK_ENABLED
+#define __TIM17_IS_CLK_DISABLED     __HAL_RCC_TIM17_IS_CLK_DISABLED
+#define __TIM18_IS_CLK_ENABLED      __HAL_RCC_TIM18_IS_CLK_ENABLED
+#define __TIM18_IS_CLK_DISABLED     __HAL_RCC_TIM18_IS_CLK_DISABLED
+#define __TIM19_IS_CLK_ENABLED      __HAL_RCC_TIM19_IS_CLK_ENABLED
+#define __TIM19_IS_CLK_DISABLED     __HAL_RCC_TIM19_IS_CLK_DISABLED
+#define __TIM20_IS_CLK_ENABLED      __HAL_RCC_TIM20_IS_CLK_ENABLED
+#define __TIM20_IS_CLK_DISABLED     __HAL_RCC_TIM20_IS_CLK_DISABLED
+#define __TSC_IS_CLK_ENABLED        __HAL_RCC_TSC_IS_CLK_ENABLED
+#define __TSC_IS_CLK_DISABLED       __HAL_RCC_TSC_IS_CLK_DISABLED
+#define __UART4_IS_CLK_ENABLED      __HAL_RCC_UART4_IS_CLK_ENABLED
+#define __UART4_IS_CLK_DISABLED     __HAL_RCC_UART4_IS_CLK_DISABLED
+#define __UART5_IS_CLK_ENABLED      __HAL_RCC_UART5_IS_CLK_ENABLED
+#define __UART5_IS_CLK_DISABLED     __HAL_RCC_UART5_IS_CLK_DISABLED
+#define __USART1_IS_CLK_ENABLED     __HAL_RCC_USART1_IS_CLK_ENABLED
+#define __USART1_IS_CLK_DISABLED    __HAL_RCC_USART1_IS_CLK_DISABLED
+#define __USART2_IS_CLK_ENABLED     __HAL_RCC_USART2_IS_CLK_ENABLED
+#define __USART2_IS_CLK_DISABLED    __HAL_RCC_USART2_IS_CLK_DISABLED
+#define __USART3_IS_CLK_ENABLED     __HAL_RCC_USART3_IS_CLK_ENABLED
+#define __USART3_IS_CLK_DISABLED    __HAL_RCC_USART3_IS_CLK_DISABLED
+#define __USB_IS_CLK_ENABLED        __HAL_RCC_USB_IS_CLK_ENABLED
+#define __USB_IS_CLK_DISABLED       __HAL_RCC_USB_IS_CLK_DISABLED
+#define __WWDG_IS_CLK_ENABLED       __HAL_RCC_WWDG_IS_CLK_ENABLED
+#define __WWDG_IS_CLK_DISABLED      __HAL_RCC_WWDG_IS_CLK_DISABLED
+
+#if defined(STM32F4)
+#define __HAL_RCC_SDMMC1_FORCE_RESET       __HAL_RCC_SDIO_FORCE_RESET
+#define __HAL_RCC_SDMMC1_RELEASE_RESET     __HAL_RCC_SDIO_RELEASE_RESET
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE  __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDMMC1_CLK_ENABLE        __HAL_RCC_SDIO_CLK_ENABLE
+#define __HAL_RCC_SDMMC1_CLK_DISABLE       __HAL_RCC_SDIO_CLK_DISABLE
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED    __HAL_RCC_SDIO_IS_CLK_ENABLED
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED   __HAL_RCC_SDIO_IS_CLK_DISABLED
+#define Sdmmc1ClockSelection               SdioClockSelection
+#define RCC_PERIPHCLK_SDMMC1               RCC_PERIPHCLK_SDIO
+#define RCC_SDMMC1CLKSOURCE_CLK48          RCC_SDIOCLKSOURCE_CK48
+#define RCC_SDMMC1CLKSOURCE_SYSCLK         RCC_SDIOCLKSOURCE_SYSCLK
+#define __HAL_RCC_SDMMC1_CONFIG            __HAL_RCC_SDIO_CONFIG
+#define __HAL_RCC_GET_SDMMC1_SOURCE        __HAL_RCC_GET_SDIO_SOURCE
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define __HAL_RCC_SDIO_FORCE_RESET         __HAL_RCC_SDMMC1_FORCE_RESET
+#define __HAL_RCC_SDIO_RELEASE_RESET       __HAL_RCC_SDMMC1_RELEASE_RESET
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE    __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE   __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
+#define __HAL_RCC_SDIO_CLK_ENABLE          __HAL_RCC_SDMMC1_CLK_ENABLE
+#define __HAL_RCC_SDIO_CLK_DISABLE         __HAL_RCC_SDMMC1_CLK_DISABLE
+#define __HAL_RCC_SDIO_IS_CLK_ENABLED      __HAL_RCC_SDMMC1_IS_CLK_ENABLED
+#define __HAL_RCC_SDIO_IS_CLK_DISABLED     __HAL_RCC_SDMMC1_IS_CLK_DISABLED
+#define SdioClockSelection                 Sdmmc1ClockSelection
+#define RCC_PERIPHCLK_SDIO                 RCC_PERIPHCLK_SDMMC1
+#define __HAL_RCC_SDIO_CONFIG              __HAL_RCC_SDMMC1_CONFIG
+#define __HAL_RCC_GET_SDIO_SOURCE          __HAL_RCC_GET_SDMMC1_SOURCE	
+#endif
+
+#if defined(STM32F7)
+#define RCC_SDIOCLKSOURCE_CK48             RCC_SDMMC1CLKSOURCE_CLK48
+#define RCC_SDIOCLKSOURCE_SYSCLK           RCC_SDMMC1CLKSOURCE_SYSCLK
+#endif
+
+#define __HAL_RCC_I2SCLK            __HAL_RCC_I2S_CONFIG
+#define __HAL_RCC_I2SCLK_CONFIG     __HAL_RCC_I2S_CONFIG
+
+#define __RCC_PLLSRC                RCC_GET_PLL_OSCSOURCE
+
+#define IS_RCC_MSIRANGE             IS_RCC_MSI_CLOCK_RANGE
+#define IS_RCC_RTCCLK_SOURCE        IS_RCC_RTCCLKSOURCE
+#define IS_RCC_SYSCLK_DIV           IS_RCC_HCLK
+#define IS_RCC_HCLK_DIV             IS_RCC_PCLK
+#define IS_RCC_PERIPHCLK            IS_RCC_PERIPHCLOCK
+
+#define RCC_IT_HSI14                RCC_IT_HSI14RDY
+
+#if defined(STM32L0)
+#define RCC_IT_LSECSS              RCC_IT_CSSLSE 
+#define RCC_IT_CSS                 RCC_IT_CSSHSE
+#endif
+
+#define IS_RCC_MCOSOURCE            IS_RCC_MCO1SOURCE
+#define __HAL_RCC_MCO_CONFIG        __HAL_RCC_MCO1_CONFIG
+#define RCC_MCO_NODIV               RCC_MCODIV_1
+#define RCC_MCO_DIV1                RCC_MCODIV_1
+#define RCC_MCO_DIV2                RCC_MCODIV_2
+#define RCC_MCO_DIV4                RCC_MCODIV_4
+#define RCC_MCO_DIV8                RCC_MCODIV_8
+#define RCC_MCO_DIV16               RCC_MCODIV_16
+#define RCC_MCO_DIV32               RCC_MCODIV_32
+#define RCC_MCO_DIV64               RCC_MCODIV_64
+#define RCC_MCO_DIV128              RCC_MCODIV_128
+#define RCC_MCOSOURCE_NONE          RCC_MCO1SOURCE_NOCLOCK
+#define RCC_MCOSOURCE_LSI           RCC_MCO1SOURCE_LSI
+#define RCC_MCOSOURCE_LSE           RCC_MCO1SOURCE_LSE
+#define RCC_MCOSOURCE_SYSCLK        RCC_MCO1SOURCE_SYSCLK
+#define RCC_MCOSOURCE_HSI           RCC_MCO1SOURCE_HSI
+#define RCC_MCOSOURCE_HSI14         RCC_MCO1SOURCE_HSI14
+#define RCC_MCOSOURCE_HSI48         RCC_MCO1SOURCE_HSI48
+#define RCC_MCOSOURCE_HSE           RCC_MCO1SOURCE_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV1   RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_NODIV  RCC_MCO1SOURCE_PLLCLK
+#define RCC_MCOSOURCE_PLLCLK_DIV2   RCC_MCO1SOURCE_PLLCLK_DIV2
+
+#define RCC_RTCCLKSOURCE_NONE       RCC_RTCCLKSOURCE_NO_CLK
+
+#define RCC_USBCLK_PLLSAI1          RCC_USBCLKSOURCE_PLLSAI1
+#define RCC_USBCLK_PLL              RCC_USBCLKSOURCE_PLL
+#define RCC_USBCLK_MSI              RCC_USBCLKSOURCE_MSI
+#define RCC_USBCLKSOURCE_PLLCLK     RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1          RCC_USBCLKSOURCE_PLL
+#define RCC_USBPLLCLK_DIV1_5        RCC_USBCLKSOURCE_PLL_DIV1_5
+#define RCC_USBPLLCLK_DIV2          RCC_USBCLKSOURCE_PLL_DIV2
+#define RCC_USBPLLCLK_DIV3          RCC_USBCLKSOURCE_PLL_DIV3
+
+#define HSION_BitNumber        RCC_HSION_BIT_NUMBER
+#define HSION_BITNUMBER        RCC_HSION_BIT_NUMBER
+#define HSEON_BitNumber        RCC_HSEON_BIT_NUMBER
+#define HSEON_BITNUMBER        RCC_HSEON_BIT_NUMBER
+#define MSION_BITNUMBER        RCC_MSION_BIT_NUMBER
+#define CSSON_BitNumber        RCC_CSSON_BIT_NUMBER
+#define CSSON_BITNUMBER        RCC_CSSON_BIT_NUMBER
+#define PLLON_BitNumber        RCC_PLLON_BIT_NUMBER
+#define PLLON_BITNUMBER        RCC_PLLON_BIT_NUMBER
+#define PLLI2SON_BitNumber     RCC_PLLI2SON_BIT_NUMBER
+#define I2SSRC_BitNumber       RCC_I2SSRC_BIT_NUMBER
+#define RTCEN_BitNumber        RCC_RTCEN_BIT_NUMBER
+#define RTCEN_BITNUMBER        RCC_RTCEN_BIT_NUMBER
+#define BDRST_BitNumber        RCC_BDRST_BIT_NUMBER
+#define BDRST_BITNUMBER        RCC_BDRST_BIT_NUMBER
+#define RTCRST_BITNUMBER       RCC_RTCRST_BIT_NUMBER
+#define LSION_BitNumber        RCC_LSION_BIT_NUMBER
+#define LSION_BITNUMBER        RCC_LSION_BIT_NUMBER
+#define LSEON_BitNumber        RCC_LSEON_BIT_NUMBER
+#define LSEON_BITNUMBER        RCC_LSEON_BIT_NUMBER
+#define LSEBYP_BITNUMBER       RCC_LSEBYP_BIT_NUMBER
+#define PLLSAION_BitNumber     RCC_PLLSAION_BIT_NUMBER
+#define TIMPRE_BitNumber       RCC_TIMPRE_BIT_NUMBER
+#define RMVF_BitNumber         RCC_RMVF_BIT_NUMBER
+#define RMVF_BITNUMBER         RCC_RMVF_BIT_NUMBER
+#define RCC_CR2_HSI14TRIM_BitNumber RCC_HSI14TRIM_BIT_NUMBER
+#define CR_BYTE2_ADDRESS       RCC_CR_BYTE2_ADDRESS
+#define CIR_BYTE1_ADDRESS      RCC_CIR_BYTE1_ADDRESS
+#define CIR_BYTE2_ADDRESS      RCC_CIR_BYTE2_ADDRESS
+#define BDCR_BYTE0_ADDRESS     RCC_BDCR_BYTE0_ADDRESS
+#define DBP_TIMEOUT_VALUE      RCC_DBP_TIMEOUT_VALUE
+#define LSE_TIMEOUT_VALUE      RCC_LSE_TIMEOUT_VALUE
+
+#define CR_HSION_BB            RCC_CR_HSION_BB
+#define CR_CSSON_BB            RCC_CR_CSSON_BB
+#define CR_PLLON_BB            RCC_CR_PLLON_BB
+#define CR_PLLI2SON_BB         RCC_CR_PLLI2SON_BB
+#define CR_MSION_BB            RCC_CR_MSION_BB
+#define CSR_LSION_BB           RCC_CSR_LSION_BB
+#define CSR_LSEON_BB           RCC_CSR_LSEON_BB
+#define CSR_LSEBYP_BB          RCC_CSR_LSEBYP_BB
+#define CSR_RTCEN_BB           RCC_CSR_RTCEN_BB
+#define CSR_RTCRST_BB          RCC_CSR_RTCRST_BB
+#define CFGR_I2SSRC_BB         RCC_CFGR_I2SSRC_BB
+#define BDCR_RTCEN_BB          RCC_BDCR_RTCEN_BB
+#define BDCR_BDRST_BB          RCC_BDCR_BDRST_BB
+#define CR_HSEON_BB            RCC_CR_HSEON_BB
+#define CSR_RMVF_BB            RCC_CSR_RMVF_BB
+#define CR_PLLSAION_BB         RCC_CR_PLLSAION_BB
+#define DCKCFGR_TIMPRE_BB      RCC_DCKCFGR_TIMPRE_BB
+
+#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER     __HAL_RCC_CRS_FREQ_ERROR_COUNTER_ENABLE
+#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER    __HAL_RCC_CRS_FREQ_ERROR_COUNTER_DISABLE
+#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB        __HAL_RCC_CRS_AUTOMATIC_CALIB_ENABLE
+#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB       __HAL_RCC_CRS_AUTOMATIC_CALIB_DISABLE
+#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE         __HAL_RCC_CRS_RELOADVALUE_CALCULATE
+
+#define __HAL_RCC_GET_IT_SOURCE                     __HAL_RCC_GET_IT
+/**
+  * @}
+  */
+
+/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define  HAL_RNG_ReadyCallback(__HANDLE__)  HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)                                       
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+  
+#define __HAL_RTC_CLEAR_FLAG                      __HAL_RTC_EXTI_CLEAR_FLAG
+#define __HAL_RTC_DISABLE_IT                      __HAL_RTC_EXTI_DISABLE_IT
+#define __HAL_RTC_ENABLE_IT                       __HAL_RTC_EXTI_ENABLE_IT
+
+#if defined (STM32F1)
+#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT)  __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
+
+#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT)   __HAL_RTC_ALARM_EXTI_ENABLE_IT()
+
+#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT)  __HAL_RTC_ALARM_EXTI_DISABLE_IT()
+
+#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT)    __HAL_RTC_ALARM_EXTI_GET_FLAG()
+
+#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT)   __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__)  (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
+                                                   (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__)   (((__EXTI_LINE__)  == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
+                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__)  (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
+                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__)    (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
+                                                  (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+                                                      __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__)   (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
+                                                      (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() :  \
+                                                          __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+#endif   /* STM32F1 */
+
+#define IS_ALARM                                  IS_RTC_ALARM
+#define IS_ALARM_MASK                             IS_RTC_ALARM_MASK
+#define IS_TAMPER                                 IS_RTC_TAMPER
+#define IS_TAMPER_ERASE_MODE                      IS_RTC_TAMPER_ERASE_MODE
+#define IS_TAMPER_FILTER                          IS_RTC_TAMPER_FILTER 
+#define IS_TAMPER_INTERRUPT                       IS_RTC_TAMPER_INTERRUPT
+#define IS_TAMPER_MASKFLAG_STATE                  IS_RTC_TAMPER_MASKFLAG_STATE
+#define IS_TAMPER_PRECHARGE_DURATION              IS_RTC_TAMPER_PRECHARGE_DURATION
+#define IS_TAMPER_PULLUP_STATE                    IS_RTC_TAMPER_PULLUP_STATE
+#define IS_TAMPER_SAMPLING_FREQ                   IS_RTC_TAMPER_SAMPLING_FREQ
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION     IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
+#define IS_TAMPER_TRIGGER                         IS_RTC_TAMPER_TRIGGER
+#define IS_WAKEUP_CLOCK                           IS_RTC_WAKEUP_CLOCK
+#define IS_WAKEUP_COUNTER                         IS_RTC_WAKEUP_COUNTER
+
+#define __RTC_WRITEPROTECTION_ENABLE  __HAL_RTC_WRITEPROTECTION_ENABLE
+#define __RTC_WRITEPROTECTION_DISABLE  __HAL_RTC_WRITEPROTECTION_DISABLE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define SD_OCR_CID_CSD_OVERWRIETE   SD_OCR_CID_CSD_OVERWRITE
+#define SD_CMD_SD_APP_STAUS         SD_CMD_SD_APP_STATUS
+
+#if defined(STM32F4)
+#define  SD_SDMMC_DISABLED          SD_SDIO_DISABLED
+#define  SD_SDMMC_FUNCTION_BUSY     SD_SDIO_FUNCTION_BUSY     
+#define  SD_SDMMC_FUNCTION_FAILED   SD_SDIO_FUNCTION_FAILED   
+#define  SD_SDMMC_UNKNOWN_FUNCTION  SD_SDIO_UNKNOWN_FUNCTION  
+#define  SD_CMD_SDMMC_SEN_OP_COND   SD_CMD_SDIO_SEN_OP_COND   
+#define  SD_CMD_SDMMC_RW_DIRECT     SD_CMD_SDIO_RW_DIRECT     
+#define  SD_CMD_SDMMC_RW_EXTENDED   SD_CMD_SDIO_RW_EXTENDED   
+#define  __HAL_SD_SDMMC_ENABLE      __HAL_SD_SDIO_ENABLE      
+#define  __HAL_SD_SDMMC_DISABLE     __HAL_SD_SDIO_DISABLE     
+#define  __HAL_SD_SDMMC_DMA_ENABLE  __HAL_SD_SDIO_DMA_ENABLE  
+#define  __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL  
+#define  __HAL_SD_SDMMC_ENABLE_IT   __HAL_SD_SDIO_ENABLE_IT   
+#define  __HAL_SD_SDMMC_DISABLE_IT  __HAL_SD_SDIO_DISABLE_IT  
+#define  __HAL_SD_SDMMC_GET_FLAG    __HAL_SD_SDIO_GET_FLAG    
+#define  __HAL_SD_SDMMC_CLEAR_FLAG  __HAL_SD_SDIO_CLEAR_FLAG  
+#define  __HAL_SD_SDMMC_GET_IT      __HAL_SD_SDIO_GET_IT      
+#define  __HAL_SD_SDMMC_CLEAR_IT    __HAL_SD_SDIO_CLEAR_IT    
+#define  SDMMC_STATIC_FLAGS         SDIO_STATIC_FLAGS	       
+#define  SDMMC_CMD0TIMEOUT          SDIO_CMD0TIMEOUT	       
+#define  SD_SDMMC_SEND_IF_COND      SD_SDIO_SEND_IF_COND
+/* alias CMSIS */
+#define  SDMMC1_IRQn                SDIO_IRQn
+#define  SDMMC1_IRQHandler          SDIO_IRQHandler
+#endif
+
+#if defined(STM32F7) || defined(STM32L4)
+#define  SD_SDIO_DISABLED           SD_SDMMC_DISABLED
+#define  SD_SDIO_FUNCTION_BUSY      SD_SDMMC_FUNCTION_BUSY    
+#define  SD_SDIO_FUNCTION_FAILED    SD_SDMMC_FUNCTION_FAILED  
+#define  SD_SDIO_UNKNOWN_FUNCTION   SD_SDMMC_UNKNOWN_FUNCTION
+#define  SD_CMD_SDIO_SEN_OP_COND    SD_CMD_SDMMC_SEN_OP_COND
+#define  SD_CMD_SDIO_RW_DIRECT      SD_CMD_SDMMC_RW_DIRECT
+#define  SD_CMD_SDIO_RW_EXTENDED    SD_CMD_SDMMC_RW_EXTENDED
+#define  __HAL_SD_SDIO_ENABLE       __HAL_SD_SDMMC_ENABLE
+#define  __HAL_SD_SDIO_DISABLE      __HAL_SD_SDMMC_DISABLE
+#define  __HAL_SD_SDIO_DMA_ENABLE   __HAL_SD_SDMMC_DMA_ENABLE
+#define  __HAL_SD_SDIO_DMA_DISABL   __HAL_SD_SDMMC_DMA_DISABLE
+#define  __HAL_SD_SDIO_ENABLE_IT    __HAL_SD_SDMMC_ENABLE_IT
+#define  __HAL_SD_SDIO_DISABLE_IT   __HAL_SD_SDMMC_DISABLE_IT
+#define  __HAL_SD_SDIO_GET_FLAG     __HAL_SD_SDMMC_GET_FLAG
+#define  __HAL_SD_SDIO_CLEAR_FLAG   __HAL_SD_SDMMC_CLEAR_FLAG
+#define  __HAL_SD_SDIO_GET_IT       __HAL_SD_SDMMC_GET_IT
+#define  __HAL_SD_SDIO_CLEAR_IT     __HAL_SD_SDMMC_CLEAR_IT
+#define  SDIO_STATIC_FLAGS	        SDMMC_STATIC_FLAGS
+#define  SDIO_CMD0TIMEOUT	          SDMMC_CMD0TIMEOUT
+#define  SD_SDIO_SEND_IF_COND	      SD_SDMMC_SEND_IF_COND
+/* alias CMSIS for compatibilities */
+#define  SDIO_IRQn                  SDMMC1_IRQn
+#define  SDIO_IRQHandler            SDMMC1_IRQHandler
+#endif
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __SMARTCARD_ENABLE_IT           __HAL_SMARTCARD_ENABLE_IT
+#define __SMARTCARD_DISABLE_IT          __HAL_SMARTCARD_DISABLE_IT
+#define __SMARTCARD_ENABLE              __HAL_SMARTCARD_ENABLE
+#define __SMARTCARD_DISABLE             __HAL_SMARTCARD_DISABLE
+#define __SMARTCARD_DMA_REQUEST_ENABLE  __HAL_SMARTCARD_DMA_REQUEST_ENABLE
+#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
+
+#define __HAL_SMARTCARD_GETCLOCKSOURCE  SMARTCARD_GETCLOCKSOURCE
+#define __SMARTCARD_GETCLOCKSOURCE      SMARTCARD_GETCLOCKSOURCE
+
+#define IS_SMARTCARD_ONEBIT_SAMPLING    IS_SMARTCARD_ONE_BIT_SAMPLE                  
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_SMBUS_RESET_CR1           SMBUS_RESET_CR1
+#define __HAL_SMBUS_RESET_CR2           SMBUS_RESET_CR2
+#define __HAL_SMBUS_GENERATE_START      SMBUS_GENERATE_START
+#define __HAL_SMBUS_GET_ADDR_MATCH      SMBUS_GET_ADDR_MATCH
+#define __HAL_SMBUS_GET_DIR             SMBUS_GET_DIR
+#define __HAL_SMBUS_GET_STOP_MODE       SMBUS_GET_STOP_MODE
+#define __HAL_SMBUS_GET_PEC_MODE        SMBUS_GET_PEC_MODE
+#define __HAL_SMBUS_GET_ALERT_ENABLED   SMBUS_GET_ALERT_ENABLED
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_SPI_1LINE_TX              SPI_1LINE_TX
+#define __HAL_SPI_1LINE_RX              SPI_1LINE_RX
+#define __HAL_SPI_RESET_CRC             SPI_RESET_CRC
+
+/**
+  * @}
+  */
+  
+/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __HAL_UART_GETCLOCKSOURCE       UART_GETCLOCKSOURCE
+#define __HAL_UART_MASK_COMPUTATION     UART_MASK_COMPUTATION
+#define __UART_GETCLOCKSOURCE           UART_GETCLOCKSOURCE
+#define __UART_MASK_COMPUTATION         UART_MASK_COMPUTATION
+
+#define IS_UART_WAKEUPMETHODE           IS_UART_WAKEUPMETHOD
+
+#define IS_UART_ONEBIT_SAMPLE           IS_UART_ONE_BIT_SAMPLE                  
+#define IS_UART_ONEBIT_SAMPLING         IS_UART_ONE_BIT_SAMPLE                  
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
+  * @{
+  */
+
+#define __USART_ENABLE_IT               __HAL_USART_ENABLE_IT
+#define __USART_DISABLE_IT              __HAL_USART_DISABLE_IT
+#define __USART_ENABLE                  __HAL_USART_ENABLE
+#define __USART_DISABLE                 __HAL_USART_DISABLE
+
+#define __HAL_USART_GETCLOCKSOURCE      USART_GETCLOCKSOURCE
+#define __USART_GETCLOCKSOURCE          USART_GETCLOCKSOURCE
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define USB_EXTI_LINE_WAKEUP                               USB_WAKEUP_EXTI_LINE
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE                    USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE                   USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE                      USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_FS_EXTI_LINE_WAKEUP                            USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE                    USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE                   USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE                      USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_HS_EXTI_LINE_WAKEUP                            USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_EXTI_ENABLE_IT                           __HAL_USB_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_EXTI_DISABLE_IT                          __HAL_USB_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_EXTI_GET_FLAG                            __HAL_USB_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_EXTI_CLEAR_FLAG                          __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER             __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER            __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER           __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT                        __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_FS_EXTI_DISABLE_IT                       __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_FS_EXTI_GET_FLAG                         __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG                       __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER          __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER         __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER        __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT                    __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT                        __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_HS_EXTI_DISABLE_IT                       __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_HS_EXTI_GET_FLAG                         __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG                       __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER          __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER         __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER        __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT                    __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define HAL_PCD_ActiveRemoteWakeup                         HAL_PCD_ActivateRemoteWakeup
+#define HAL_PCD_DeActiveRemoteWakeup                       HAL_PCD_DeActivateRemoteWakeup
+
+#define HAL_PCD_SetTxFiFo                                  HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo                                  HAL_PCDEx_SetRxFiFo
+/**
+  * @}
+  */
+
+/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_TIM_SetICPrescalerValue   TIM_SET_ICPRESCALERVALUE
+#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
+
+#define TIM_GET_ITSTATUS                __HAL_TIM_GET_IT_SOURCE
+#define TIM_GET_CLEAR_IT                __HAL_TIM_CLEAR_IT
+
+#define __HAL_TIM_GET_ITSTATUS          __HAL_TIM_GET_IT_SOURCE
+
+#define __HAL_TIM_DIRECTION_STATUS      __HAL_TIM_IS_TIM_COUNTING_DOWN
+#define __HAL_TIM_PRESCALER             __HAL_TIM_SET_PRESCALER
+#define __HAL_TIM_SetCounter            __HAL_TIM_SET_COUNTER
+#define __HAL_TIM_GetCounter            __HAL_TIM_GET_COUNTER
+#define __HAL_TIM_SetAutoreload         __HAL_TIM_SET_AUTORELOAD
+#define __HAL_TIM_GetAutoreload         __HAL_TIM_GET_AUTORELOAD
+#define __HAL_TIM_SetClockDivision      __HAL_TIM_SET_CLOCKDIVISION
+#define __HAL_TIM_GetClockDivision      __HAL_TIM_GET_CLOCKDIVISION
+#define __HAL_TIM_SetICPrescaler        __HAL_TIM_SET_ICPRESCALER
+#define __HAL_TIM_GetICPrescaler        __HAL_TIM_GET_ICPRESCALER
+#define __HAL_TIM_SetCompare            __HAL_TIM_SET_COMPARE
+#define __HAL_TIM_GetCompare            __HAL_TIM_GET_COMPARE
+
+#define TIM_TS_ITR0                        ((uint32_t)0x0000)
+#define TIM_TS_ITR1                        ((uint32_t)0x0010)
+#define TIM_TS_ITR2                        ((uint32_t)0x0020)
+#define TIM_TS_ITR3                        ((uint32_t)0x0030)
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+                                                      ((SELECTION) == TIM_TS_ITR1) || \
+                                                      ((SELECTION) == TIM_TS_ITR2) || \
+                                                      ((SELECTION) == TIM_TS_ITR3))
+
+#define TIM_CHANNEL_1                      ((uint32_t)0x0000)
+#define TIM_CHANNEL_2                      ((uint32_t)0x0004)
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                       ((CHANNEL) == TIM_CHANNEL_2))
+
+#define TIM_OUTPUTNSTATE_DISABLE            ((uint32_t)0x0000)
+#define TIM_OUTPUTNSTATE_ENABLE             (TIM_CCER_CC1NE)
+
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
+                                     ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
+
+#define TIM_OUTPUTSTATE_DISABLE            ((uint32_t)0x0000)
+#define TIM_OUTPUTSTATE_ENABLE             (TIM_CCER_CC1E)
+
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
+                                    ((STATE) == TIM_OUTPUTSTATE_ENABLE))  
+/**
+  * @}
+  */
+
+/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
+  * @{
+  */
+  
+#define __HAL_ETH_EXTI_ENABLE_IT                   __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_ETH_EXTI_DISABLE_IT                  __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_ETH_EXTI_GET_FLAG                    __HAL_ETH_WAKEUP_EXTI_GET_FLAG
+#define __HAL_ETH_EXTI_CLEAR_FLAG                  __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER     __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER    __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER   __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
+
+#define ETH_PROMISCIOUSMODE_ENABLE   ETH_PROMISCUOUS_MODE_ENABLE 
+#define ETH_PROMISCIOUSMODE_DISABLE  ETH_PROMISCUOUS_MODE_DISABLE
+#define IS_ETH_PROMISCIOUS_MODE      IS_ETH_PROMISCUOUS_MODE
+/**
+  * @}
+  */
+
+/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define __HAL_LTDC_LAYER LTDC_LAYER
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
+  * @{
+  */
+#define SAI_OUTPUTDRIVE_DISABLED          SAI_OUTPUTDRIVE_DISABLE
+#define SAI_OUTPUTDRIVE_ENABLED           SAI_OUTPUTDRIVE_ENABLE
+#define SAI_MASTERDIVIDER_ENABLED         SAI_MASTERDIVIDER_ENABLE
+#define SAI_MASTERDIVIDER_DISABLED        SAI_MASTERDIVIDER_DISABLE
+#define SAI_STREOMODE                     SAI_STEREOMODE
+#define SAI_FIFOStatus_Empty              SAI_FIFOSTATUS_EMPTY              
+#define SAI_FIFOStatus_Less1QuarterFull   SAI_FIFOSTATUS_LESS1QUARTERFULL    
+#define SAI_FIFOStatus_1QuarterFull       SAI_FIFOSTATUS_1QUARTERFULL       
+#define SAI_FIFOStatus_HalfFull           SAI_FIFOSTATUS_HALFFULL           
+#define SAI_FIFOStatus_3QuartersFull      SAI_FIFOSTATUS_3QUARTERFULL       
+#define SAI_FIFOStatus_Full               SAI_FIFOSTATUS_FULL               
+#define IS_SAI_BLOCK_MONO_STREO_MODE     IS_SAI_BLOCK_MONO_STEREO_MODE
+
+/**
+  * @}
+  */
+
+
+/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
+  * @{
+  */
+  
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32_HAL_LEGACY */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,504 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   HAL module driver.
+  *          This is the common part of the HAL initialization
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The common HAL driver contains a set of generic and common APIs that can be
+    used by the PPP peripheral drivers and the user to start using the HAL. 
+    [..]
+    The HAL contains two APIs' categories: 
+         (+) Common HAL APIs
+         (+) Services HAL APIs
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HAL HAL
+  * @brief HAL module driver.
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup HAL_Private_Constants
+  * @{
+  */
+/**
+ * @brief STM32F7xx HAL Driver version number V1.0.4
+   */
+#define __STM32F7xx_HAL_VERSION_MAIN   (0x01) /*!< [31:24] main version */
+#define __STM32F7xx_HAL_VERSION_SUB1   (0x00) /*!< [23:16] sub1 version */
+#define __STM32F7xx_HAL_VERSION_SUB2   (0x04) /*!< [15:8]  sub2 version */
+#define __STM32F7xx_HAL_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
+#define __STM32F7xx_HAL_VERSION         ((__STM32F7xx_HAL_VERSION_MAIN << 24)\
+                                        |(__STM32F7xx_HAL_VERSION_SUB1 << 16)\
+                                        |(__STM32F7xx_HAL_VERSION_SUB2 << 8 )\
+                                        |(__STM32F7xx_HAL_VERSION_RC))
+                                        
+#define IDCODE_DEVID_MASK    ((uint32_t)0x00000FFF)
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup HAL_Private_Variables
+  * @{
+  */
+static __IO uint32_t uwTick;
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup HAL_Exported_Functions HAL Exported Functions
+  * @{
+  */
+
+/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions 
+ *  @brief    Initialization and de-initialization functions
+ *
+@verbatim    
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initializes the Flash interface the NVIC allocation and initial clock 
+          configuration. It initializes the systick also when timeout is needed 
+          and the backup domain when enabled.
+      (+) de-Initializes common part of the HAL
+      (+) Configure The time base source to have 1ms time base with a dedicated 
+          Tick interrupt priority. 
+        (++) Systick timer is used by default as source of time base, but user 
+             can eventually implement his proper time base source (a general purpose 
+             timer for example or other time source), keeping in mind that Time base 
+             duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and 
+             handled in milliseconds basis.
+        (++) Time base configuration function (HAL_InitTick ()) is called automatically 
+             at the beginning of the program after reset by HAL_Init() or at any time 
+             when clock is configured, by HAL_RCC_ClockConfig(). 
+        (++) Source of time base is configured  to generate interrupts at regular 
+             time intervals. Care must be taken if HAL_Delay() is called from a 
+             peripheral ISR process, the Tick interrupt line must have higher priority 
+            (numerically lower) than the peripheral interrupt. Otherwise the caller 
+            ISR process will be blocked. 
+       (++) functions affecting time base configurations are declared as __weak  
+             to make  override possible  in case of other  implementations in user file.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function is used to initialize the HAL Library; it must be the first 
+  *         instruction to be executed in the main program (before to call any other
+  *         HAL function), it performs the following:
+  *           Configure the Flash prefetch, and instruction cache through ART accelerator.
+  *           Configures the SysTick to generate an interrupt each 1 millisecond,
+  *           which is clocked by the HSI (at this stage, the clock is not yet
+  *           configured and thus the system is running from the internal HSI at 16 MHz).
+  *           Set NVIC Group Priority to 4.
+  *           Calls the HAL_MspInit() callback function defined in user file 
+  *           "stm32f7xx_hal_msp.c" to do the global low level hardware initialization 
+  *            
+  * @note   SysTick is used as time base for the HAL_Delay() function, the application
+  *         need to ensure that the SysTick time base is always set to 1 millisecond
+  *         to have correct HAL operation.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_Init(void)
+{
+  /* Configure Flash prefetch and Instruction cache through ART accelerator */ 
+#if (ART_ACCLERATOR_ENABLE != 0)
+   __HAL_FLASH_ART_ENABLE();
+#endif /* ART_ACCLERATOR_ENABLE */
+
+  /* Set Interrupt Group Priority */
+  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
+
+  /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
+  HAL_InitTick(TICK_INT_PRIORITY);
+  
+  /* Init the low level hardware */
+  HAL_MspInit();
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function de-Initializes common part of the HAL and stops the systick.
+  *         This function is optional.   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DeInit(void)
+{
+  /* Reset of all peripherals */
+  __HAL_RCC_APB1_FORCE_RESET();
+  __HAL_RCC_APB1_RELEASE_RESET();
+
+  __HAL_RCC_APB2_FORCE_RESET();
+  __HAL_RCC_APB2_RELEASE_RESET();
+
+  __HAL_RCC_AHB1_FORCE_RESET();
+  __HAL_RCC_AHB1_RELEASE_RESET();
+
+  __HAL_RCC_AHB2_FORCE_RESET();
+  __HAL_RCC_AHB2_RELEASE_RESET();
+
+  __HAL_RCC_AHB3_FORCE_RESET();
+  __HAL_RCC_AHB3_RELEASE_RESET();
+
+  /* De-Init the low level hardware */
+  HAL_MspDeInit();
+    
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the MSP.
+  * @retval None
+  */
+__weak void HAL_MspInit(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the MSP.
+  * @retval None
+  */
+__weak void HAL_MspDeInit(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief This function configures the source of the time base.
+  *        The time source is configured  to have 1ms time base with a dedicated 
+  *        Tick interrupt priority.
+  * @note This function is called  automatically at the beginning of program after
+  *       reset by HAL_Init() or at any time when clock is reconfigured  by HAL_RCC_ClockConfig().
+  * @note In the default implementation, SysTick timer is the source of time base. 
+  *       It is used to generate interrupts at regular time intervals. 
+  *       Care must be taken if HAL_Delay() is called from a peripheral ISR process, 
+  *       The the SysTick interrupt must have higher priority (numerically lower) 
+  *       than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
+  *       The function is declared as __weak  to be overwritten  in case of other
+  *       implementation  in user file.
+  * @param TickPriority: Tick interrupt priority.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
+{
+  /*Configure the SysTick to have interrupt in 1ms time basis*/
+  HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
+
+  /*Configure the SysTick IRQ priority */
+  HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions 
+ *  @brief    HAL Control functions
+ *
+@verbatim
+ ===============================================================================
+                      ##### HAL Control functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Provide a tick value in millisecond
+      (+) Provide a blocking delay in millisecond
+      (+) Suspend the time base source interrupt
+      (+) Resume the time base source interrupt
+      (+) Get the HAL API driver version
+      (+) Get the device identifier
+      (+) Get the device revision identifier
+      (+) Enable/Disable Debug module during SLEEP mode
+      (+) Enable/Disable Debug module during STOP mode
+      (+) Enable/Disable Debug module during STANDBY mode
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief This function is called to increment  a global variable "uwTick"
+  *        used as application time base.
+  * @note In the default implementation, this variable is incremented each 1ms
+  *       in Systick ISR.
+ * @note This function is declared as __weak to be overwritten in case of other 
+  *      implementations in user file.
+  * @retval None
+  */
+__weak void HAL_IncTick(void)
+{
+  uwTick++;
+}
+
+/**
+  * @brief Provides a tick value in millisecond.
+  * @note This function is declared as __weak to be overwritten in case of other 
+  *       implementations in user file.
+  * @retval tick value
+  */
+__weak uint32_t HAL_GetTick(void)
+{
+  return uwTick;
+}
+
+/**
+  * @brief This function provides accurate delay (in milliseconds) based 
+  *        on variable incremented.
+  * @note In the default implementation , SysTick timer is the source of time base.
+  *       It is used to generate interrupts at regular time intervals where uwTick
+  *       is incremented.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @param Delay: specifies the delay time length, in milliseconds.
+  * @retval None
+  */
+__weak void HAL_Delay(__IO uint32_t Delay)
+{
+  uint32_t tickstart = 0;
+  tickstart = HAL_GetTick();
+  while((HAL_GetTick() - tickstart) < Delay)
+  {
+  }
+}
+
+/**
+  * @brief Suspend Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
+  *       is called, the SysTick interrupt will be disabled and so Tick increment 
+  *       is suspended.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_SuspendTick(void)
+{
+  /* Disable SysTick Interrupt */
+  SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+  * @brief Resume Tick increment.
+  * @note In the default implementation , SysTick timer is the source of time base. It is
+  *       used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
+  *       is called, the SysTick interrupt will be enabled and so Tick increment 
+  *       is resumed.
+  * @note This function is declared as __weak to be overwritten in case of other
+  *       implementations in user file.
+  * @retval None
+  */
+__weak void HAL_ResumeTick(void)
+{
+  /* Enable SysTick Interrupt */
+  SysTick->CTRL  |= SysTick_CTRL_TICKINT_Msk;
+}
+
+/**
+  * @brief  Returns the HAL revision
+  * @retval version : 0xXYZR (8bits for each decimal, R for RC)
+  */
+uint32_t HAL_GetHalVersion(void)
+{
+ return __STM32F7xx_HAL_VERSION;
+}
+
+/**
+  * @brief  Returns the device revision identifier.
+  * @retval Device revision identifier
+  */
+uint32_t HAL_GetREVID(void)
+{
+   return((DBGMCU->IDCODE) >> 16);
+}
+
+/**
+  * @brief  Returns the device identifier.
+  * @retval Device identifier
+  */
+uint32_t HAL_GetDEVID(void)
+{
+   return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
+}
+
+/**
+  * @brief  Enable the Debug Module during SLEEP mode
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGSleepMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Disable the Debug Module during SLEEP mode
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGSleepMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STOP mode
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStopMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Disable the Debug Module during STOP mode
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStopMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
+}
+
+/**
+  * @brief  Enable the Debug Module during STANDBY mode
+  * @retval None
+  */
+void HAL_DBGMCU_EnableDBGStandbyMode(void)
+{
+  SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @brief  Disable the Debug Module during STANDBY mode
+  * @retval None
+  */
+void HAL_DBGMCU_DisableDBGStandbyMode(void)
+{
+  CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
+}
+
+/**
+  * @brief  Enables the I/O Compensation Cell.
+  * @note   The I/O compensation cell can be used only when the device supply
+  *         voltage ranges from 2.4 to 3.6 V.  
+  * @retval None
+  */
+void HAL_EnableCompensationCell(void)
+{
+  SYSCFG->CMPCR |= SYSCFG_CMPCR_CMP_PD;
+}
+
+/**
+  * @brief  Power-down the I/O Compensation Cell.
+  * @note   The I/O compensation cell can be used only when the device supply
+  *         voltage ranges from 2.4 to 3.6 V.  
+  * @retval None
+  */
+void HAL_DisableCompensationCell(void)
+{
+  SYSCFG->CMPCR &= (uint32_t)~((uint32_t)SYSCFG_CMPCR_CMP_PD);
+}
+
+/**
+  * @brief  Enables the FMC Memory Mapping Swapping.
+  *   
+  * @note   SDRAM is accessible at 0x60000000 
+  *         and NOR/RAM is accessible at 0xC0000000   
+  *
+  * @retval None
+  */
+void HAL_EnableFMCMemorySwapping(void)
+{
+  SYSCFG->MEMRMP |= SYSCFG_MEMRMP_SWP_FMC_0;
+}
+
+/**
+  * @brief  Disables the FMC Memory Mapping Swapping
+  *   
+  * @note   SDRAM is accessible at 0xC0000000 (default mapping)  
+  *         and NOR/RAM is accessible at 0x60000000 (default mapping)    
+  *           
+  * @retval None
+  */
+void HAL_DisableFMCMemorySwapping(void)
+{
+
+  SYSCFG->MEMRMP &= (uint32_t)~((uint32_t)SYSCFG_MEMRMP_SWP_FMC);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,209 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   This file contains all the functions prototypes for the HAL 
+  *          module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_H
+#define __STM32F7xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_conf.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HAL
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+  * @{
+  */
+  
+/** @brief  Freeze/Unfreeze Peripherals in Debug mode 
+  */
+#define __HAL_DBGMCU_FREEZE_TIM2()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM3()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM4()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM5()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM6()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM7()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM12()          (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM13()          (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM14()          (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_FREEZE_LPTIM1()         (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_LPTIM1_STOP))
+#define __HAL_DBGMCU_FREEZE_RTC()            (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_FREEZE_WWDG()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_IWDG()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT()   (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT()   (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT()   (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C4_TIMEOUT()   (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_CAN1()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_FREEZE_CAN2()           (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM1()           (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM8()           (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM9()           (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM10()          (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM11()          (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+#define __HAL_DBGMCU_UNFREEZE_TIM2()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM3()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM4()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM5()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM6()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM7()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM12()          (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM13()          (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM14()          (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_UNFREEZE_LPTIM1()         (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_LPTIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_RTC()            (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_UNFREEZE_WWDG()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_IWDG()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT()   (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT()   (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT()   (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C4_TIMEOUT()   (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_CAN1()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_CAN2()           (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM1()           (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM8()           (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM9()           (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM10()          (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM11()          (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+
+/** @brief  FMC (NOR/RAM) mapped at 0x60000000 and SDRAM mapped at 0xC0000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC()          (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_SWP_FMC))
+                                       
+
+/** @brief  FMC/SDRAM  mapped at 0x60000000 (NOR/RAM) mapped at 0xC0000000
+  */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_SWP_FMC);\
+                                          SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_SWP_FMC_0);\
+                                         }while(0);
+/**
+  * @}
+  */
+  
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions
+  * @{
+  */
+/** @addtogroup HAL_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+/**
+  * @}
+  */
+ 
+/** @addtogroup HAL_Exported_Functions_Group2
+  * @{
+  */ 
+/* Peripheral Control functions  ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+uint32_t HAL_GetTick(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+void HAL_DBGMCU_EnableDBGSleepMode(void);
+void HAL_DBGMCU_DisableDBGSleepMode(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+void HAL_EnableCompensationCell(void);
+void HAL_DisableCompensationCell(void);
+void HAL_EnableFMCMemorySwapping(void);
+void HAL_DisableFMCMemorySwapping(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */  
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Private Variables
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Constants HAL Private Constants
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_adc.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1677 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_adc.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   This file provides firmware functions to manage the following 
+  *          functionalities of the Analog to Digital Convertor (ADC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + State and errors functions
+  *         
+  @verbatim
+  ==============================================================================
+                    ##### ADC Peripheral features #####
+  ==============================================================================
+  [..] 
+  (#) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution.
+  (#) Interrupt generation at the end of conversion, end of injected conversion,  
+      and in case of analog watchdog or overrun events
+  (#) Single and continuous conversion modes.
+  (#) Scan mode for automatic conversion of channel 0 to channel x.
+  (#) Data alignment with in-built data coherency.
+  (#) Channel-wise programmable sampling time.
+  (#) External trigger option with configurable polarity for both regular and 
+      injected conversion.
+  (#) Dual/Triple mode (on devices with 2 ADCs or more).
+  (#) Configurable DMA data storage in Dual/Triple ADC mode. 
+  (#) Configurable delay between conversions in Dual/Triple interleaved mode.
+  (#) ADC conversion type (refer to the datasheets).
+  (#) ADC supply requirements: 2.4 V to 3.6 V at full speed and down to 1.8 V at 
+      slower speed.
+  (#) ADC input range: VREF(minus) = VIN = VREF(plus).
+  (#) DMA request generation during regular channel conversion.
+
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+  (#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit():
+       (##) Enable the ADC interface clock using __HAL_RCC_ADC_CLK_ENABLE()
+       (##) ADC pins configuration
+             (+++) Enable the clock for the ADC GPIOs using the following function:
+                   __HAL_RCC_GPIOx_CLK_ENABLE()  
+             (+++) Configure these ADC pins in analog mode using HAL_GPIO_Init() 
+       (##) In case of using interrupts (e.g. HAL_ADC_Start_IT())
+             (+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority()
+             (+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ()
+             (+++) In ADC IRQ handler, call HAL_ADC_IRQHandler()
+       (##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA())
+             (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE()
+             (+++) Configure and enable two DMA streams stream for managing data
+                 transfer from peripheral to memory (output stream)
+             (+++) Associate the initialized DMA handle to the CRYP DMA handle
+                 using  __HAL_LINKDMA()
+             (+++) Configure the priority and enable the NVIC for the transfer complete
+                 interrupt on the two DMA Streams. The output stream should have higher
+                 priority than the input stream.
+                       
+    *** Configuration of ADC, groups regular/injected, channels parameters ***
+  ==============================================================================
+  [..]
+  (#) Configure the ADC parameters (resolution, data alignment, ...)
+      and regular group parameters (conversion trigger, sequencer, ...)
+      using function HAL_ADC_Init().
+
+  (#) Configure the channels for regular group parameters (channel number, 
+      channel rank into sequencer, ..., into regular group)
+      using function HAL_ADC_ConfigChannel().
+
+  (#) Optionally, configure the injected group parameters (conversion trigger, 
+      sequencer, ..., of injected group)
+      and the channels for injected group parameters (channel number, 
+      channel rank into sequencer, ..., into injected group)
+      using function HAL_ADCEx_InjectedConfigChannel().
+
+  (#) Optionally, configure the analog watchdog parameters (channels
+      monitored, thresholds, ...) using function HAL_ADC_AnalogWDGConfig().
+
+  (#) Optionally, for devices with several ADC instances: configure the 
+      multimode parameters using function HAL_ADCEx_MultiModeConfigChannel().
+
+                       *** Execution of ADC conversions ***
+  ==============================================================================
+  [..]  
+  (#) ADC driver can be used among three modes: polling, interruption,
+      transfer by DMA.    
+
+     *** Polling mode IO operation ***
+     =================================
+     [..]    
+       (+) Start the ADC peripheral using HAL_ADC_Start() 
+       (+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage
+           user can specify the value of timeout according to his end application      
+       (+) To read the ADC converted values, use the HAL_ADC_GetValue() function.
+       (+) Stop the ADC peripheral using HAL_ADC_Stop()
+       
+     *** Interrupt mode IO operation ***    
+     ===================================
+     [..]    
+       (+) Start the ADC peripheral using HAL_ADC_Start_IT() 
+       (+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine
+       (+) At ADC end of conversion HAL_ADC_ConvCpltCallback() function is executed and user can 
+           add his own code by customization of function pointer HAL_ADC_ConvCpltCallback 
+       (+) In case of ADC Error, HAL_ADC_ErrorCallback() function is executed and user can 
+           add his own code by customization of function pointer HAL_ADC_ErrorCallback
+       (+) Stop the ADC peripheral using HAL_ADC_Stop_IT()     
+
+     *** DMA mode IO operation ***    
+     ==============================
+     [..]    
+       (+) Start the ADC peripheral using HAL_ADC_Start_DMA(), at this stage the user specify the length 
+           of data to be transferred at each end of conversion 
+       (+) At The end of data transfer by HAL_ADC_ConvCpltCallback() function is executed and user can 
+           add his own code by customization of function pointer HAL_ADC_ConvCpltCallback 
+       (+) In case of transfer Error, HAL_ADC_ErrorCallback() function is executed and user can 
+           add his own code by customization of function pointer HAL_ADC_ErrorCallback
+       (+) Stop the ADC peripheral using HAL_ADC_Stop_DMA()
+                    
+     *** ADC HAL driver macros list ***
+     ============================================= 
+     [..]
+       Below the list of most used macros in ADC HAL driver.
+       
+      (+) __HAL_ADC_ENABLE : Enable the ADC peripheral
+      (+) __HAL_ADC_DISABLE : Disable the ADC peripheral
+      (+) __HAL_ADC_ENABLE_IT: Enable the ADC end of conversion interrupt
+      (+) __HAL_ADC_DISABLE_IT: Disable the ADC end of conversion interrupt
+      (+) __HAL_ADC_GET_IT_SOURCE: Check if the specified ADC interrupt source is enabled or disabled
+      (+) __HAL_ADC_CLEAR_FLAG: Clear the ADC's pending flags
+      (+) __HAL_ADC_GET_FLAG: Get the selected ADC's flag status
+      (+) ADC_GET_RESOLUTION: Return resolution bits in CR1 register 
+      
+     [..] 
+       (@) You can refer to the ADC HAL driver header file for more useful macros 
+
+                      *** Deinitialization of ADC ***
+  ==============================================================================
+  [..]
+  (#) Disable the ADC interface
+     (++) ADC clock can be hard reset and disabled at RCC top level.
+     (++) Hard reset of ADC peripherals
+          using macro __HAL_RCC_ADC_FORCE_RESET(), __HAL_RCC_ADC_RELEASE_RESET().
+     (++) ADC clock disable using the equivalent macro/functions as configuration step.
+               (+++) Example:
+                   Into HAL_ADC_MspDeInit() (recommended code location) or with
+                   other device clock parameters configuration:
+               (+++) HAL_RCC_GetOscConfig(&RCC_OscInitStructure);
+               (+++) RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI;
+               (+++) RCC_OscInitStructure.HSIState = RCC_HSI_OFF; (if not used for system clock)
+               (+++) HAL_RCC_OscConfig(&RCC_OscInitStructure);
+
+  (#) ADC pins configuration
+     (++) Disable the clock for the ADC GPIOs using macro __HAL_RCC_GPIOx_CLK_DISABLE()
+
+  (#) Optionally, in case of usage of ADC with interruptions:
+     (++) Disable the NVIC for ADC using function HAL_NVIC_DisableIRQ(ADCx_IRQn)
+
+  (#) Optionally, in case of usage of DMA:
+        (++) Deinitialize the DMA using function HAL_DMA_DeInit().
+        (++) Disable the NVIC for DMA using function HAL_NVIC_DisableIRQ(DMAx_Channelx_IRQn)   
+
+    @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup ADC ADC
+  * @brief ADC driver modules
+  * @{
+  */ 
+
+#ifdef HAL_ADC_MODULE_ENABLED
+    
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup ADC_Private_Functions
+  * @{
+  */
+/* Private function prototypes -----------------------------------------------*/
+static void ADC_Init(ADC_HandleTypeDef* hadc);
+static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma);
+static void ADC_DMAError(DMA_HandleTypeDef *hdma);
+static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup ADC_Exported_Functions ADC Exported Functions
+  * @{
+  */
+
+/** @defgroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the ADC. 
+      (+) De-initialize the ADC. 
+         
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the ADCx peripheral according to the specified parameters 
+  *         in the ADC_InitStruct and initializes the ADC MSP.
+  *           
+  * @note   This function is used to configure the global features of the ADC ( 
+  *         ClockPrescaler, Resolution, Data Alignment and number of conversion), however,
+  *         the rest of the configuration parameters are specific to the regular
+  *         channels group (scan mode activation, continuous mode activation,
+  *         External trigger source and edge, DMA continuous request after the  
+  *         last transfer and End of conversion selection).
+  *             
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc)
+{
+  HAL_StatusTypeDef tmp_hal_status = HAL_OK;
+  
+  /* Check ADC handle */
+  if(hadc == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+  assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler));
+  assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution));
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ScanConvMode));
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+  assert_param(IS_ADC_EXT_TRIG(hadc->Init.ExternalTrigConv));
+  assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign));
+  assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion));
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests));
+  assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection));
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode));
+
+  if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START)
+  {
+    assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+  }
+
+  if(hadc->State == HAL_ADC_STATE_RESET)
+  {
+    /* Initialize ADC error code */
+    ADC_CLEAR_ERRORCODE(hadc);
+    
+    /* Allocate lock resource and initialize it */
+    hadc->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_ADC_MspInit(hadc);
+  }
+  
+  /* Configuration of ADC parameters if previous preliminary actions are      */ 
+  /* correctly completed.                                                     */
+  if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL))
+  {
+    /* Set ADC state */
+    ADC_STATE_CLR_SET(hadc->State,
+                      HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+                      HAL_ADC_STATE_BUSY_INTERNAL);
+    
+    /* Set ADC parameters */
+    ADC_Init(hadc);
+    
+    /* Set ADC error code to none */
+    ADC_CLEAR_ERRORCODE(hadc);
+    
+    /* Set the ADC state */
+    ADC_STATE_CLR_SET(hadc->State,
+                      HAL_ADC_STATE_BUSY_INTERNAL,
+                      HAL_ADC_STATE_READY);
+  }
+  else
+  {
+    tmp_hal_status = HAL_ERROR;
+  }
+  
+  /* Release Lock */
+  __HAL_UNLOCK(hadc);
+
+  /* Return function status */
+  return tmp_hal_status;
+}
+
+/**
+  * @brief  Deinitializes the ADCx peripheral registers to their default reset values. 
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc)
+{
+  HAL_StatusTypeDef tmp_hal_status = HAL_OK;
+  
+  /* Check ADC handle */
+  if(hadc == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+  
+  /* Set ADC state */
+  SET_BIT(hadc->State, HAL_ADC_STATE_BUSY_INTERNAL);
+  
+  /* Stop potential conversion on going, on regular and injected groups */
+  /* Disable ADC peripheral */
+  __HAL_ADC_DISABLE(hadc);
+  
+  /* Configuration of ADC parameters if previous preliminary actions are      */ 
+  /* correctly completed.                                                     */
+  if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+  {
+    /* DeInit the low level hardware */
+    HAL_ADC_MspDeInit(hadc);
+    
+    /* Set ADC error code to none */
+    ADC_CLEAR_ERRORCODE(hadc);
+    
+    /* Set ADC state */
+    hadc->State = HAL_ADC_STATE_RESET;
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+  
+  /* Return function status */
+  return tmp_hal_status;
+}
+
+/**
+  * @brief  Initializes the ADC MSP.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.  
+  * @retval None
+  */
+__weak void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hadc);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  DeInitializes the ADC MSP.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.  
+  * @retval None
+  */
+__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hadc);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Exported_Functions_Group2 IO operation functions
+ *  @brief    IO operation functions 
+ *
+@verbatim   
+ ===============================================================================
+             ##### IO operation functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Start conversion of regular channel.
+      (+) Stop conversion of regular channel.
+      (+) Start conversion of regular channel and enable interrupt.
+      (+) Stop conversion of regular channel and disable interrupt.
+      (+) Start conversion of regular channel and enable DMA transfer.
+      (+) Stop conversion of regular channel and disable DMA transfer.
+      (+) Handle ADC interrupt request. 
+               
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables ADC and starts conversion of the regular channels.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc)
+{
+  __IO uint32_t counter = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+  assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); 
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  /* Enable the ADC peripheral */
+  /* Check if ADC peripheral is disabled in order to enable it and wait during 
+  Tstab time the ADC's stabilization */
+  if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+  {  
+    /* Enable the Peripheral */
+    __HAL_ADC_ENABLE(hadc);
+    
+    /* Delay for ADC stabilization time */
+    /* Compute number of CPU cycles to wait for */
+    counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
+    while(counter != 0)
+    {
+      counter--;
+    }
+  }
+  
+  /* Start conversion if ADC is effectively enabled */
+  if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
+  {
+    /* Set ADC state                                                          */
+    /* - Clear state bitfield related to regular group conversion results     */
+    /* - Set state bitfield related to regular group operation                */
+    ADC_STATE_CLR_SET(hadc->State,
+                      HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR,
+                      HAL_ADC_STATE_REG_BUSY);
+    
+    /* If conversions on group regular are also triggering group injected,    */
+    /* update ADC state.                                                      */
+    if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET)
+    {
+      ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY);  
+    }
+    
+    /* State machine update: Check if an injected conversion is ongoing */
+    if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+    {
+      /* Reset ADC error code fields related to conversions on group regular */
+      CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA));         
+    }
+    else
+    {
+      /* Reset ADC all error code fields */
+      ADC_CLEAR_ERRORCODE(hadc);
+    }
+    
+    /* Process unlocked */
+    /* Unlock before starting ADC conversions: in case of potential           */
+    /* interruption, to let the process to ADC IRQ Handler.                   */
+    __HAL_UNLOCK(hadc);
+    
+    /* Clear regular group conversion flag and overrun flag */
+    /* (To ensure of no unknown state from potential previous ADC operations) */
+    __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC);
+    
+    /* Check if Multimode enabled */
+    if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+    {
+      /* if no external trigger present enable software conversion of regular channels */
+      if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) 
+      {
+        /* Enable the selected ADC software conversion for regular group */
+        hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+      }
+    }
+    else
+    {
+      /* if instance of handle correspond to ADC1 and  no external trigger present enable software conversion of regular channels */
+      if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
+      {
+        /* Enable the selected ADC software conversion for regular group */
+          hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+      }
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables ADC and stop conversion of regular channels.
+  * 
+  * @note   Caution: This function will stop also injected channels.  
+  *
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  *
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  /* Stop potential conversion on going, on regular and injected groups */
+  /* Disable ADC peripheral */
+  __HAL_ADC_DISABLE(hadc);
+  
+  /* Check if ADC is effectively disabled */
+  if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+  {
+    /* Set ADC state */
+    ADC_STATE_CLR_SET(hadc->State,
+                      HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+                      HAL_ADC_STATE_READY);
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Poll for regular conversion complete
+  * @note   ADC conversion flags EOS (end of sequence) and EOC (end of
+  *         conversion) are cleared by this function.
+  * @note   This function cannot be used in a particular setup: ADC configured 
+  *         in DMA mode and polling for end of each conversion (ADC init
+  *         parameter "EOCSelection" set to ADC_EOC_SINGLE_CONV).
+  *         In this case, DMA resets the flag EOC and polling cannot be
+  *         performed on each conversion. Nevertheless, polling can still 
+  *         be performed on the complete sequence.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  Timeout: Timeout value in millisecond.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  
+  /* Verification that ADC configuration is compliant with polling for      */
+  /* each conversion:                                                       */
+  /* Particular case is ADC configured in DMA mode and ADC sequencer with   */
+  /* several ranks and polling for end of each conversion.                  */
+  /* For code simplicity sake, this particular case is generalized to       */
+  /* ADC configured in DMA mode and polling for end of each conversion.     */
+  if (HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_EOCS) &&
+      HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_DMA)    )
+  {
+    /* Update ADC state machine to error */
+    SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
+    
+    /* Process unlocked */
+    __HAL_UNLOCK(hadc);
+    
+    return HAL_ERROR;
+  }
+ 
+  /* Get tick */ 
+  tickstart = HAL_GetTick();
+
+  /* Check End of conversion flag */
+  while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC)))
+  {
+    /* Check if timeout is disabled (set to infinite wait) */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0) || ((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Update ADC state machine to timeout */
+        SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
+        
+        /* Process unlocked */
+        __HAL_UNLOCK(hadc);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Clear regular group conversion flag */
+  __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC);
+  
+  /* Update ADC state machine */
+  SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC);
+  
+  /* Determine whether any further conversion upcoming on group regular       */
+  /* by external trigger, continuous mode or scan sequence on going.          */
+  /* Note: On STM32F7, there is no independent flag of end of sequence.       */
+  /*       The test of scan sequence on going is done either with scan        */
+  /*       sequence disabled or with end of conversion flag set to            */
+  /*       of end of sequence.                                                */
+  if(ADC_IS_SOFTWARE_START_REGULAR(hadc)                   &&
+     (hadc->Init.ContinuousConvMode == DISABLE)            &&
+     (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) ||
+      HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS)  )   )
+  {
+    /* Set ADC state */
+    CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);   
+    
+    if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+    { 
+      SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+    }
+  }
+  
+  /* Return ADC state */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Poll for conversion event
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  EventType: the ADC event type.
+  *          This parameter can be one of the following values:
+  *            @arg ADC_AWD_EVENT: ADC Analog watch Dog event.
+  *            @arg ADC_OVR_EVENT: ADC Overrun event.
+  * @param  Timeout: Timeout value in millisecond.   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+  assert_param(IS_ADC_EVENT_TYPE(EventType));
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check selected event flag */
+  while(!(__HAL_ADC_GET_FLAG(hadc,EventType)))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0) || ((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Update ADC state machine to timeout */
+        SET_BIT(hadc->State, HAL_ADC_STATE_TIMEOUT);
+        
+        /* Process unlocked */
+        __HAL_UNLOCK(hadc);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Analog watchdog (level out of window) event */
+  if(EventType == ADC_AWD_EVENT)
+  {
+    /* Set ADC state */
+    SET_BIT(hadc->State, HAL_ADC_STATE_AWD1);
+      
+    /* Clear ADC analog watchdog flag */
+    __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD);
+  }
+  /* Overrun event */
+  else
+  {
+    /* Set ADC state */
+    SET_BIT(hadc->State, HAL_ADC_STATE_REG_OVR);
+    /* Set ADC error code to overrun */
+    SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR);
+    
+    /* Clear ADC overrun flag */
+    __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
+  }
+  
+  /* Return ADC state */
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Enables the interrupt and starts ADC conversion of regular channels.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc)
+{
+  __IO uint32_t counter = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+  assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); 
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  /* Enable the ADC peripheral */
+  /* Check if ADC peripheral is disabled in order to enable it and wait during 
+     Tstab time the ADC's stabilization */
+  if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+  {  
+    /* Enable the Peripheral */
+    __HAL_ADC_ENABLE(hadc);
+    
+    /* Delay for ADC stabilization time */
+    /* Compute number of CPU cycles to wait for */
+    counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
+    while(counter != 0)
+    {
+      counter--;
+    }
+  }
+  
+  /* Start conversion if ADC is effectively enabled */
+  if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
+  {
+    /* Set ADC state                                                          */
+    /* - Clear state bitfield related to regular group conversion results     */
+    /* - Set state bitfield related to regular group operation                */
+    ADC_STATE_CLR_SET(hadc->State,
+                      HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR,
+                      HAL_ADC_STATE_REG_BUSY);
+    
+    /* If conversions on group regular are also triggering group injected,    */
+    /* update ADC state.                                                      */
+    if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET)
+    {
+      ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY);  
+    }
+    
+    /* State machine update: Check if an injected conversion is ongoing */
+    if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+    {
+      /* Reset ADC error code fields related to conversions on group regular */
+      CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA));         
+    }
+    else
+    {
+      /* Reset ADC all error code fields */
+      ADC_CLEAR_ERRORCODE(hadc);
+    }
+    
+    /* Process unlocked */
+    /* Unlock before starting ADC conversions: in case of potential           */
+    /* interruption, to let the process to ADC IRQ Handler.                   */
+    __HAL_UNLOCK(hadc);
+    
+    /* Clear regular group conversion flag and overrun flag */
+    /* (To ensure of no unknown state from potential previous ADC operations) */
+    __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC);
+    
+    /* Enable end of conversion interrupt for regular group */
+    __HAL_ADC_ENABLE_IT(hadc, (ADC_IT_EOC | ADC_IT_OVR));
+    
+    /* Check if Multimode enabled */
+    if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+    {
+      /* if no external trigger present enable software conversion of regular channels */
+      if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) 
+      {
+        /* Enable the selected ADC software conversion for regular group */
+        hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+      }
+    }
+    else
+    {
+      /* if instance of handle correspond to ADC1 and  no external trigger present enable software conversion of regular channels */
+      if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
+      {
+        /* Enable the selected ADC software conversion for regular group */
+          hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+      }
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables the interrupt and stop ADC conversion of regular channels.
+  * 
+  * @note   Caution: This function will stop also injected channels.  
+  *
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  /* Stop potential conversion on going, on regular and injected groups */
+  /* Disable ADC peripheral */
+  __HAL_ADC_DISABLE(hadc);
+  
+  /* Check if ADC is effectively disabled */
+  if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+  {
+    /* Set ADC state */
+    ADC_STATE_CLR_SET(hadc->State,
+                      HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+                      HAL_ADC_STATE_READY);
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles ADC interrupt request  
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+  assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion));
+  assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection));
+  
+  tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC);
+  tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_EOC);
+  /* Check End of conversion flag for regular channels */
+  if(tmp1 && tmp2)
+  {
+    /* Update state machine on conversion status if not in error state */
+    if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL))
+    {
+      /* Set ADC state */
+      SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC); 
+    }
+    
+    /* Determine whether any further conversion upcoming on group regular   */
+    /* by external trigger, continuous mode or scan sequence on going.      */
+    /* Note: On STM32F7, there is no independent flag of end of sequence.   */
+    /*       The test of scan sequence on going is done either with scan    */
+    /*       sequence disabled or with end of conversion flag set to        */
+    /*       of end of sequence.                                            */
+    if(ADC_IS_SOFTWARE_START_REGULAR(hadc)                   &&
+       (hadc->Init.ContinuousConvMode == DISABLE)            &&
+       (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) || 
+        HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS)  )   )
+    {
+      /* Disable ADC end of single conversion interrupt on group regular */
+      /* Note: Overrun interrupt was enabled with EOC interrupt in          */
+      /* HAL_ADC_Start_IT(), but is not disabled here because can be used   */
+      /* by overrun IRQ process below.                                      */
+      __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
+      
+      /* Set ADC state */
+      CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);
+      
+      if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+      {
+        SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+      }
+    }
+    
+    /* Conversion complete callback */ 
+    HAL_ADC_ConvCpltCallback(hadc);
+    
+    /* Clear regular group conversion flag */
+    __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_STRT | ADC_FLAG_EOC);
+  }
+  
+  tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC);
+  tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_JEOC);                               
+  /* Check End of conversion flag for injected channels */
+  if(tmp1 && tmp2)
+  {
+    /* Update state machine on conversion status if not in error state */
+    if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL))
+    {
+      /* Set ADC state */
+      SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC);
+    }
+
+    /* Determine whether any further conversion upcoming on group injected  */
+    /* by external trigger, scan sequence on going or by automatic injected */
+    /* conversion from group regular (same conditions as group regular      */
+    /* interruption disabling above).                                       */
+    if(ADC_IS_SOFTWARE_START_INJECTED(hadc)                    &&
+       (HAL_IS_BIT_CLR(hadc->Instance->JSQR, ADC_JSQR_JL) ||
+        HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS)) &&
+       (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) &&
+       (ADC_IS_SOFTWARE_START_REGULAR(hadc) &&
+       (hadc->Init.ContinuousConvMode == DISABLE))))
+    {
+      /* Disable ADC end of single conversion interrupt on group injected */
+      __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC);
+      
+      /* Set ADC state */
+      CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);   
+
+      if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY))
+      { 
+        SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+      }
+    }
+
+    /* Conversion complete callback */ 
+    HAL_ADCEx_InjectedConvCpltCallback(hadc);
+    
+    /* Clear injected group conversion flag */
+    __HAL_ADC_CLEAR_FLAG(hadc, (ADC_FLAG_JSTRT | ADC_FLAG_JEOC));
+  }
+  
+  tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD);
+  tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_AWD);                          
+  /* Check Analog watchdog flag */
+  if(tmp1 && tmp2)
+  {
+    if(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD))
+    {
+      /* Set ADC state */
+      SET_BIT(hadc->State, HAL_ADC_STATE_AWD1);
+      
+      /* Level out of window callback */ 
+      HAL_ADC_LevelOutOfWindowCallback(hadc);
+      
+      /* Clear the ADC analog watchdog flag */
+      __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD);
+    }
+  }
+  
+  tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_OVR);
+  tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_OVR);
+  /* Check Overrun flag */
+  if(tmp1 && tmp2)
+  {
+    /* Note: On STM32F7, ADC overrun can be set through other parameters    */
+    /*       refer to description of parameter "EOCSelection" for more      */
+    /*       details.                                                       */
+    
+    /* Set ADC error code to overrun */
+    SET_BIT(hadc->ErrorCode, HAL_ADC_ERROR_OVR);
+    
+    /* Clear ADC overrun flag */
+    __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
+    
+    /* Error callback */ 
+    HAL_ADC_ErrorCallback(hadc);
+    
+    /* Clear the Overrun flag */
+    __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
+  }
+}
+
+/**
+  * @brief  Enables ADC DMA request after last transfer (Single-ADC mode) and enables ADC peripheral  
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  pData: The destination Buffer address.
+  * @param  Length: The length of data to be transferred from ADC peripheral to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length)
+{
+  __IO uint32_t counter = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+  assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge)); 
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  /* Enable the ADC peripheral */
+  /* Check if ADC peripheral is disabled in order to enable it and wait during 
+     Tstab time the ADC's stabilization */
+  if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+  {  
+    /* Enable the Peripheral */
+    __HAL_ADC_ENABLE(hadc);
+    
+    /* Delay for ADC stabilization time */
+    /* Compute number of CPU cycles to wait for */
+    counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
+    while(counter != 0)
+    {
+      counter--;
+    }
+  }
+  
+  /* Start conversion if ADC is effectively enabled */
+  if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
+  {
+    /* Set ADC state                                                          */
+    /* - Clear state bitfield related to regular group conversion results     */
+    /* - Set state bitfield related to regular group operation                */
+    ADC_STATE_CLR_SET(hadc->State,
+                      HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR,
+                      HAL_ADC_STATE_REG_BUSY);
+    
+    /* If conversions on group regular are also triggering group injected,    */
+    /* update ADC state.                                                      */
+    if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET)
+    {
+      ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY);  
+    }
+    
+    /* State machine update: Check if an injected conversion is ongoing */
+    if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+    {
+      /* Reset ADC error code fields related to conversions on group regular */
+      CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA));         
+    }
+    else
+    {
+      /* Reset ADC all error code fields */
+      ADC_CLEAR_ERRORCODE(hadc);
+    }
+    
+    /* Process unlocked */
+    /* Unlock before starting ADC conversions: in case of potential           */
+    /* interruption, to let the process to ADC IRQ Handler.                   */
+    __HAL_UNLOCK(hadc);   
+
+    /* Set the DMA transfer complete callback */
+    hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt;
+
+    /* Set the DMA half transfer complete callback */
+    hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt;
+    
+    /* Set the DMA error callback */
+    hadc->DMA_Handle->XferErrorCallback = ADC_DMAError;
+
+    
+    /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC     */
+    /* start (in case of SW start):                                           */
+    
+    /* Clear regular group conversion flag and overrun flag */
+    /* (To ensure of no unknown state from potential previous ADC operations) */
+    __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC);
+
+    /* Enable ADC overrun interrupt */
+    __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
+    
+    /* Enable ADC DMA mode */
+    hadc->Instance->CR2 |= ADC_CR2_DMA;
+    
+    /* Start the DMA channel */
+    HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length);
+    
+    /* Check if Multimode enabled */
+    if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+    {
+      /* if no external trigger present enable software conversion of regular channels */
+      if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) 
+      {
+        /* Enable the selected ADC software conversion for regular group */
+        hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+      }
+    }
+    else
+    {
+      /* if instance of handle correspond to ADC1 and  no external trigger present enable software conversion of regular channels */
+      if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
+      {
+        /* Enable the selected ADC software conversion for regular group */
+          hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+      }
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables ADC DMA (Single-ADC mode) and disables ADC peripheral    
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc)
+{
+  HAL_StatusTypeDef tmp_hal_status = HAL_OK;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  /* Stop potential conversion on going, on regular and injected groups */
+  /* Disable ADC peripheral */
+  __HAL_ADC_DISABLE(hadc);
+  
+  /* Check if ADC is effectively disabled */
+  if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+  {
+    /* Disable the selected ADC DMA mode */
+    hadc->Instance->CR2 &= ~ADC_CR2_DMA;
+    
+    /* Disable the DMA channel (in case of DMA in circular mode or stop while */
+    /* DMA transfer is on going)                                              */
+    tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle);
+    
+    /* Disable ADC overrun interrupt */
+    __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
+    
+    /* Set ADC state */
+    ADC_STATE_CLR_SET(hadc->State,
+                      HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+                      HAL_ADC_STATE_READY);
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+  
+  /* Return function status */
+  return tmp_hal_status;
+}
+
+/**
+  * @brief  Gets the converted value from data register of regular channel.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval Converted value
+  */
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc)
+{       
+  /* Return the selected ADC converted value */ 
+  return hadc->Instance->DR;
+}
+
+/**
+  * @brief  Regular conversion complete callback in non blocking mode 
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hadc);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_ConvCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Regular conversion half DMA transfer callback in non blocking mode 
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hadc);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_ConvHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Analog watchdog callback in non blocking mode 
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hadc);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_LevelOoutOfWindowCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Error ADC callback.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hadc);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief   	Peripheral Control functions 
+ *
+@verbatim   
+ ===============================================================================
+             ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Configure regular channels. 
+      (+) Configure injected channels.
+      (+) Configure multimode.
+      (+) Configure the analog watch dog.
+      
+@endverbatim
+  * @{
+  */
+
+  /**
+  * @brief  Configures for the selected ADC regular channel its corresponding
+  *         rank in the sequencer and its sample time.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  sConfig: ADC configuration structure. 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig)
+{
+  __IO uint32_t counter = 0;
+
+  /* Check the parameters */
+  assert_param(IS_ADC_CHANNEL(sConfig->Channel));
+  assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank));
+  assert_param(IS_ADC_SAMPLE_TIME(sConfig->SamplingTime));
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+			
+	/* if ADC_Channel_10 ... ADC_Channel_18 is selected */
+	if (sConfig->Channel > ADC_CHANNEL_9)
+	{
+		/* Clear the old sample time */
+		hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfig->Channel);
+
+		if (sConfig->Channel == ADC_CHANNEL_TEMPSENSOR)
+		{
+			/* Set the new sample time */
+			hadc->Instance->SMPR1 |= ADC_SMPR1(sConfig->SamplingTime, ADC_CHANNEL_18);
+		}
+	  else
+	  {	
+		  /* Set the new sample time */
+		  hadc->Instance->SMPR1 |= ADC_SMPR1(sConfig->SamplingTime, sConfig->Channel);
+	  }
+  }
+  else /* ADC_Channel include in ADC_Channel_[0..9] */
+  {
+    /* Clear the old sample time */
+    hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfig->Channel);
+    
+    /* Set the new sample time */
+    hadc->Instance->SMPR2 |= ADC_SMPR2(sConfig->SamplingTime, sConfig->Channel);
+  }
+  
+  /* For Rank 1 to 6 */
+  if (sConfig->Rank < 7)
+  {
+    /* Clear the old SQx bits for the selected rank */
+    hadc->Instance->SQR3 &= ~ADC_SQR3_RK(ADC_SQR3_SQ1, sConfig->Rank);
+    
+    /* Set the SQx bits for the selected rank */
+    hadc->Instance->SQR3 |= ADC_SQR3_RK(sConfig->Channel, sConfig->Rank);
+  }
+  /* For Rank 7 to 12 */
+  else if (sConfig->Rank < 13)
+  {
+    /* Clear the old SQx bits for the selected rank */
+    hadc->Instance->SQR2 &= ~ADC_SQR2_RK(ADC_SQR2_SQ7, sConfig->Rank);
+    
+    /* Set the SQx bits for the selected rank */
+    hadc->Instance->SQR2 |= ADC_SQR2_RK(sConfig->Channel, sConfig->Rank);
+  }
+  /* For Rank 13 to 16 */
+  else
+  {
+    /* Clear the old SQx bits for the selected rank */
+    hadc->Instance->SQR1 &= ~ADC_SQR1_RK(ADC_SQR1_SQ13, sConfig->Rank);
+    
+    /* Set the SQx bits for the selected rank */
+    hadc->Instance->SQR1 |= ADC_SQR1_RK(sConfig->Channel, sConfig->Rank);
+  }
+  
+  /* if ADC1 Channel_18 is selected enable VBAT Channel */
+  if ((hadc->Instance == ADC1) && (sConfig->Channel == ADC_CHANNEL_VBAT))
+  {
+    /* Enable the VBAT channel*/
+    ADC->CCR |= ADC_CCR_VBATE;
+  }
+  
+  /* if ADC1 Channel_18 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
+  if ((hadc->Instance == ADC1) && ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) || (sConfig->Channel == ADC_CHANNEL_VREFINT)))
+  {
+    /* Enable the TSVREFE channel*/
+    ADC->CCR |= ADC_CCR_TSVREFE;
+
+    if(sConfig->Channel == ADC_CHANNEL_TEMPSENSOR)
+    {
+      /* Delay for temperature sensor stabilization time */
+      /* Compute number of CPU cycles to wait for */
+      counter = (ADC_TEMPSENSOR_DELAY_US * (SystemCoreClock / 1000000));
+      while(counter != 0)
+      {
+        counter--;
+      }
+    }
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the analog watchdog.
+  * @note   Analog watchdog thresholds can be modified while ADC conversion
+  *         is on going.
+  *         In this case, some constraints must be taken into account:
+  *         the programmed threshold values are effective from the next
+  *         ADC EOC (end of unitary conversion).
+  *         Considering that registers write delay may happen due to
+  *         bus activity, this might cause an uncertainty on the
+  *         effective timing of the new programmed threshold values.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  AnalogWDGConfig : pointer to an ADC_AnalogWDGConfTypeDef structure 
+  *         that contains the configuration information of ADC analog watchdog.
+  * @retval HAL status	  
+  */
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig)
+{
+#ifdef USE_FULL_ASSERT  
+  uint32_t tmp = 0;
+#endif /* USE_FULL_ASSERT  */  
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ANALOG_WATCHDOG(AnalogWDGConfig->WatchdogMode));
+  assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel));
+  assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode));
+
+#ifdef USE_FULL_ASSERT  
+  tmp = ADC_GET_RESOLUTION(hadc);
+  assert_param(IS_ADC_RANGE(tmp, AnalogWDGConfig->HighThreshold));
+  assert_param(IS_ADC_RANGE(tmp, AnalogWDGConfig->LowThreshold));
+#endif /* USE_FULL_ASSERT  */
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  if(AnalogWDGConfig->ITMode == ENABLE)
+  {
+    /* Enable the ADC Analog watchdog interrupt */
+    __HAL_ADC_ENABLE_IT(hadc, ADC_IT_AWD);
+  }
+  else
+  {
+    /* Disable the ADC Analog watchdog interrupt */
+    __HAL_ADC_DISABLE_IT(hadc, ADC_IT_AWD);
+  }
+  
+  /* Clear AWDEN, JAWDEN and AWDSGL bits */
+  hadc->Instance->CR1 &=  ~(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN | ADC_CR1_AWDEN);
+  
+  /* Set the analog watchdog enable mode */
+  hadc->Instance->CR1 |= AnalogWDGConfig->WatchdogMode;
+  
+  /* Set the high threshold */
+  hadc->Instance->HTR = AnalogWDGConfig->HighThreshold;
+  
+  /* Set the low threshold */
+  hadc->Instance->LTR = AnalogWDGConfig->LowThreshold;
+  
+  /* Clear the Analog watchdog channel select bits */
+  hadc->Instance->CR1 &= ~ADC_CR1_AWDCH;
+  
+  /* Set the Analog watchdog channel */
+  hadc->Instance->CR1 |= (uint32_t)((uint16_t)(AnalogWDGConfig->Channel));
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Exported_Functions_Group4 ADC Peripheral State functions
+ *  @brief   ADC Peripheral State functions 
+ *
+@verbatim   
+ ===============================================================================
+            ##### Peripheral State and errors functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides functions allowing to
+      (+) Check the ADC state
+      (+) Check the ADC Error
+         
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  return the ADC state
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL state
+  */
+uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc)
+{
+  /* Return ADC state */
+  return hadc->State;
+}
+
+/**
+  * @brief  Return the ADC error code
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval ADC Error Code
+  */
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc)
+{
+  return hadc->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup ADC_Private_Functions ADC Private Functions
+  * @{
+  */
+
+/**
+  * @brief  Initializes the ADCx peripheral according to the specified parameters 
+  *         in the ADC_InitStruct without initializing the ADC MSP.       
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.  
+  * @retval None
+  */
+static void ADC_Init(ADC_HandleTypeDef* hadc)
+{
+  /* Set ADC parameters */
+  /* Set the ADC clock prescaler */
+  ADC->CCR &= ~(ADC_CCR_ADCPRE);
+  ADC->CCR |=  hadc->Init.ClockPrescaler;
+  
+  /* Set ADC scan mode */
+  hadc->Instance->CR1 &= ~(ADC_CR1_SCAN);
+  hadc->Instance->CR1 |=  ADC_CR1_SCANCONV(hadc->Init.ScanConvMode);
+  
+  /* Set ADC resolution */
+  hadc->Instance->CR1 &= ~(ADC_CR1_RES);
+  hadc->Instance->CR1 |=  hadc->Init.Resolution;
+  
+  /* Set ADC data alignment */
+  hadc->Instance->CR2 &= ~(ADC_CR2_ALIGN);
+  hadc->Instance->CR2 |= hadc->Init.DataAlign;
+  
+  /* Enable external trigger if trigger selection is different of software  */
+  /* start.                                                                 */
+  /* Note: This configuration keeps the hardware feature of parameter       */
+  /*       ExternalTrigConvEdge "trigger edge none" equivalent to           */
+  /*       software start.                                                  */
+  if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START)
+  {
+    /* Select external trigger to start conversion */
+    hadc->Instance->CR2 &= ~(ADC_CR2_EXTSEL);
+    hadc->Instance->CR2 |= hadc->Init.ExternalTrigConv;
+    
+    /* Select external trigger polarity */
+    hadc->Instance->CR2 &= ~(ADC_CR2_EXTEN);
+    hadc->Instance->CR2 |= hadc->Init.ExternalTrigConvEdge;
+  }
+  else
+  {
+    /* Reset the external trigger */
+    hadc->Instance->CR2 &= ~(ADC_CR2_EXTSEL);
+    hadc->Instance->CR2 &= ~(ADC_CR2_EXTEN);
+  }
+  
+  /* Enable or disable ADC continuous conversion mode */
+  hadc->Instance->CR2 &= ~(ADC_CR2_CONT);
+  hadc->Instance->CR2 |= ADC_CR2_CONTINUOUS(hadc->Init.ContinuousConvMode);
+  
+  if(hadc->Init.DiscontinuousConvMode != DISABLE)
+  {
+    assert_param(IS_ADC_REGULAR_DISC_NUMBER(hadc->Init.NbrOfDiscConversion));
+  
+    /* Enable the selected ADC regular discontinuous mode */
+    hadc->Instance->CR1 |= (uint32_t)ADC_CR1_DISCEN;
+    
+    /* Set the number of channels to be converted in discontinuous mode */
+    hadc->Instance->CR1 &= ~(ADC_CR1_DISCNUM);
+    hadc->Instance->CR1 |=  ADC_CR1_DISCONTINUOUS(hadc->Init.NbrOfDiscConversion);
+  }
+  else
+  {
+    /* Disable the selected ADC regular discontinuous mode */
+    hadc->Instance->CR1 &= ~(ADC_CR1_DISCEN);
+  }
+  
+  /* Set ADC number of conversion */
+  hadc->Instance->SQR1 &= ~(ADC_SQR1_L);
+  hadc->Instance->SQR1 |=  ADC_SQR1(hadc->Init.NbrOfConversion);
+  
+  /* Enable or disable ADC DMA continuous request */
+  hadc->Instance->CR2 &= ~(ADC_CR2_DDS);
+  hadc->Instance->CR2 |= ADC_CR2_DMAContReq(hadc->Init.DMAContinuousRequests);
+  
+  /* Enable or disable ADC end of conversion selection */
+  hadc->Instance->CR2 &= ~(ADC_CR2_EOCS);
+  hadc->Instance->CR2 |= ADC_CR2_EOCSelection(hadc->Init.EOCSelection);
+}
+
+/**
+  * @brief  DMA transfer complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma)   
+{
+  /* Retrieve ADC handle corresponding to current DMA handle */
+  ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* Update state machine on conversion status if not in error state */
+  if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA))
+  {
+    /* Update ADC state machine */
+    SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC);
+    
+    /* Determine whether any further conversion upcoming on group regular   */
+    /* by external trigger, continuous mode or scan sequence on going.      */
+    /* Note: On STM32F7, there is no independent flag of end of sequence.   */
+    /*       The test of scan sequence on going is done either with scan    */
+    /*       sequence disabled or with end of conversion flag set to        */
+    /*       of end of sequence.                                            */
+    if(ADC_IS_SOFTWARE_START_REGULAR(hadc)                   &&
+       (hadc->Init.ContinuousConvMode == DISABLE)            &&
+       (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) || 
+        HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS)  )   )
+    {
+      /* Disable ADC end of single conversion interrupt on group regular */
+      /* Note: Overrun interrupt was enabled with EOC interrupt in          */
+      /* HAL_ADC_Start_IT(), but is not disabled here because can be used   */
+      /* by overrun IRQ process below.                                      */
+      __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
+      
+      /* Set ADC state */
+      CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);   
+      
+      if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+      {
+        SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+      }
+    }
+    
+    /* Conversion complete callback */
+    HAL_ADC_ConvCpltCallback(hadc);
+  }
+  else
+  {
+    /* Call DMA error callback */
+    hadc->DMA_Handle->XferErrorCallback(hdma);
+  }
+}
+
+/**
+  * @brief  DMA half transfer complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma)   
+{
+  ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  /* Conversion complete callback */
+  HAL_ADC_ConvHalfCpltCallback(hadc); 
+}
+
+/**
+  * @brief  DMA error callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void ADC_DMAError(DMA_HandleTypeDef *hdma)   
+{
+  ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hadc->State= HAL_ADC_STATE_ERROR_DMA;
+  /* Set ADC error code to DMA error */
+  hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
+  HAL_ADC_ErrorCallback(hadc); 
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_ADC_MODULE_ENABLED */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_adc.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,859 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_adc.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of ADC HAL extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_ADC_H
+#define __STM32F7xx_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ADC
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Types ADC Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  Structure definition of ADC and regular group initialization 
+  * @note   Parameters of this structure are shared within 2 scopes:
+  *          - Scope entire ADC (affects regular and injected groups): ClockPrescaler, Resolution, ScanConvMode, DataAlign, ScanConvMode, EOCSelection, LowPowerAutoWait, LowPowerAutoPowerOff, ChannelsBank.
+  *          - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv.
+  * @note   The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
+  *         ADC state can be either:
+  *          - For all parameters: ADC disabled
+  *          - For all parameters except 'Resolution', 'ScanConvMode', 'DiscontinuousConvMode', 'NbrOfDiscConversion' : ADC enabled without conversion on going on regular group.
+  *          - For parameters 'ExternalTrigConv' and 'ExternalTrigConvEdge': ADC enabled, even with conversion on going.
+  *         If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+  *         without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fullfills the ADC state condition) on the fly).
+  */
+typedef struct
+{
+  uint32_t ClockPrescaler;        /*!< Select ADC clock prescaler. The clock is common for 
+                                       all the ADCs.
+                                       This parameter can be a value of @ref ADC_ClockPrescaler */
+  uint32_t Resolution;            /*!< Configures the ADC resolution.
+                                       This parameter can be a value of @ref ADC_Resolution */
+  uint32_t DataAlign;             /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting)
+                                       or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3).
+                                       This parameter can be a value of @ref ADC_data_align */
+  uint32_t ScanConvMode;          /*!< Configures the sequencer of regular and injected groups.
+                                       This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+                                       If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
+                                                    Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
+                                       If enabled:  Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
+                                                    Scan direction is upward: from rank1 to rank 'n'. */
+  uint32_t EOCSelection;          /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence.
+                                       This parameter can be a value of @ref ADC_EOCSelection.
+                                       Note: For injected group, end of conversion (flag&IT) is raised only at the end of the sequence.
+                                             Therefore, if end of conversion is set to end of each conversion, injected group should not be used with interruption (HAL_ADCEx_InjectedStart_IT)
+                                             or polling (HAL_ADCEx_InjectedStart and HAL_ADCEx_InjectedPollForConversion). By the way, polling is still possible since driver will use an estimated timing for end of injected conversion.
+                                       Note: If overrun feature is intended to be used, use ADC in mode 'interruption' (function HAL_ADC_Start_IT() ) with parameter EOCSelection set to end of each conversion or in mode 'transfer by DMA' (function HAL_ADC_Start_DMA()).
+                                             If overrun feature is intended to be bypassed, use ADC in mode 'polling' or 'interruption' with parameter EOCSelection must be set to end of sequence */
+  uint32_t ContinuousConvMode;    /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+                                       after the selected trigger occurred (software start or external trigger).
+                                       This parameter can be set to ENABLE or DISABLE. */
+  uint32_t NbrOfConversion;       /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
+                                       To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+                                       This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
+  uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+                                       Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+                                       Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+                                       This parameter can be set to ENABLE or DISABLE. */
+  uint32_t NbrOfDiscConversion;   /*!< Specifies the number of discontinuous conversions in which the  main sequence of regular group (parameter NbrOfConversion) will be subdivided.
+                                       If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
+                                       This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+  uint32_t ExternalTrigConv;      /*!< Selects the external event used to trigger the conversion start of regular group.
+                                       If set to ADC_SOFTWARE_START, external triggers are disabled.
+                                       If set to external trigger source, triggering is on event rising edge by default.
+                                       This parameter can be a value of @ref ADC_External_trigger_Source_Regular */
+  uint32_t ExternalTrigConvEdge;  /*!< Selects the external trigger edge of regular group.
+                                       If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
+                                       This parameter can be a value of @ref ADC_External_trigger_edge_Regular */
+  uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
+                                       or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
+                                       Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached.
+                                       Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion).
+                                       This parameter can be set to ENABLE or DISABLE. */
+}ADC_InitTypeDef;
+
+
+
+/** 
+  * @brief  Structure definition of ADC channel for regular group   
+  * @note   The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
+  *         ADC can be either disabled or enabled without conversion on going on regular group.
+  */ 
+typedef struct 
+{
+  uint32_t Channel;                /*!< Specifies the channel to configure into ADC regular group.
+                                        This parameter can be a value of @ref ADC_channels */
+  uint32_t Rank;                   /*!< Specifies the rank in the regular group sequencer.
+                                        This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+  uint32_t SamplingTime;           /*!< Sampling time value to be set for the selected channel.
+                                        Unit: ADC clock cycles
+                                        Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
+                                        This parameter can be a value of @ref ADC_sampling_times
+                                        Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+                                                 If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+                                        Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+                                              sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+                                              Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
+  uint32_t Offset;                 /*!< Reserved for future use, can be set to 0 */
+}ADC_ChannelConfTypeDef;
+
+/** 
+  * @brief ADC Configuration multi-mode structure definition  
+  */ 
+typedef struct
+{
+  uint32_t WatchdogMode;      /*!< Configures the ADC analog watchdog mode.
+                                   This parameter can be a value of @ref ADC_analog_watchdog_selection */
+  uint32_t HighThreshold;     /*!< Configures the ADC analog watchdog High threshold value.
+                                   This parameter must be a 12-bit value. */     
+  uint32_t LowThreshold;      /*!< Configures the ADC analog watchdog High threshold value.
+                                   This parameter must be a 12-bit value. */
+  uint32_t Channel;           /*!< Configures ADC channel for the analog watchdog. 
+                                   This parameter has an effect only if watchdog mode is configured on single channel 
+                                   This parameter can be a value of @ref ADC_channels */      
+  uint32_t ITMode;            /*!< Specifies whether the analog watchdog is configured
+                                   is interrupt mode or in polling mode.
+                                   This parameter can be set to ENABLE or DISABLE */
+  uint32_t WatchdogNumber;    /*!< Reserved for future use, can be set to 0 */
+}ADC_AnalogWDGConfTypeDef;
+
+/** 
+  * @brief  HAL ADC state machine: ADC states definition (bitfields)
+  */ 
+/* States of ADC global scope */
+#define HAL_ADC_STATE_RESET             ((uint32_t)0x00000000)    /*!< ADC not yet initialized or disabled */
+#define HAL_ADC_STATE_READY             ((uint32_t)0x00000001)    /*!< ADC peripheral ready for use */
+#define HAL_ADC_STATE_BUSY_INTERNAL     ((uint32_t)0x00000002)    /*!< ADC is busy to internal process (initialization, calibration) */
+#define HAL_ADC_STATE_TIMEOUT           ((uint32_t)0x00000004)    /*!< TimeOut occurrence */
+
+/* States of ADC errors */
+#define HAL_ADC_STATE_ERROR_INTERNAL    ((uint32_t)0x00000010)    /*!< Internal error occurrence */
+#define HAL_ADC_STATE_ERROR_CONFIG      ((uint32_t)0x00000020)    /*!< Configuration error occurrence */
+#define HAL_ADC_STATE_ERROR_DMA         ((uint32_t)0x00000040)    /*!< DMA error occurrence */
+
+/* States of ADC group regular */
+#define HAL_ADC_STATE_REG_BUSY          ((uint32_t)0x00000100)    /*!< A conversion on group regular is ongoing or can occur (either by continuous mode,
+                                                                       external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */
+#define HAL_ADC_STATE_REG_EOC           ((uint32_t)0x00000200)    /*!< Conversion data available on group regular */
+#define HAL_ADC_STATE_REG_OVR           ((uint32_t)0x00000400)    /*!< Overrun occurrence */
+
+/* States of ADC group injected */
+#define HAL_ADC_STATE_INJ_BUSY          ((uint32_t)0x00001000)    /*!< A conversion on group injected is ongoing or can occur (either by auto-injection mode,
+                                                                       external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */
+#define HAL_ADC_STATE_INJ_EOC           ((uint32_t)0x00002000)    /*!< Conversion data available on group injected */
+
+/* States of ADC analog watchdogs */
+#define HAL_ADC_STATE_AWD1              ((uint32_t)0x00010000)    /*!< Out-of-window occurrence of analog watchdog 1 */
+#define HAL_ADC_STATE_AWD2              ((uint32_t)0x00020000)    /*!< Not available on STM32F7 device: Out-of-window occurrence of analog watchdog 2 */
+#define HAL_ADC_STATE_AWD3              ((uint32_t)0x00040000)    /*!< Not available on STM32F7 device: Out-of-window occurrence of analog watchdog 3 */
+
+/* States of ADC multi-mode */
+#define HAL_ADC_STATE_MULTIMODE_SLAVE   ((uint32_t)0x00100000)    /*!< Not available on STM32F4 device: ADC in multimode slave state, controlled by another ADC master ( */
+
+
+/** 
+  * @brief  ADC handle Structure definition
+  */ 
+typedef struct
+{
+  ADC_TypeDef                   *Instance;                   /*!< Register base address */
+
+  ADC_InitTypeDef               Init;                        /*!< ADC required parameters */
+
+  __IO uint32_t                 NbrOfCurrentConversionRank;  /*!< ADC number of current conversion rank */
+
+  DMA_HandleTypeDef             *DMA_Handle;                 /*!< Pointer DMA Handler */
+
+  HAL_LockTypeDef               Lock;                        /*!< ADC locking object */
+
+  __IO uint32_t                 State;                       /*!< ADC communication state */
+
+  __IO uint32_t                 ErrorCode;                   /*!< ADC Error code */
+}ADC_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADC_Exported_Constants ADC Exported Constants
+  * @{
+  */
+
+/** @defgroup ADC_Error_Code ADC Error Code
+  * @{
+  */
+#define HAL_ADC_ERROR_NONE        ((uint32_t)0x00)   /*!< No error                                              */
+#define HAL_ADC_ERROR_INTERNAL    ((uint32_t)0x01)   /*!< ADC IP internal error: if problem of clocking, 
+                                                          enable/disable, erroneous state                       */
+#define HAL_ADC_ERROR_OVR         ((uint32_t)0x02)   /*!< Overrun error                                         */
+#define HAL_ADC_ERROR_DMA         ((uint32_t)0x04)   /*!< DMA transfer error                                    */
+/**
+  * @}
+  */
+
+
+/** @defgroup ADC_ClockPrescaler  ADC Clock Prescaler
+  * @{
+  */ 
+#define ADC_CLOCK_SYNC_PCLK_DIV2    ((uint32_t)0x00000000)
+#define ADC_CLOCK_SYNC_PCLK_DIV4    ((uint32_t)ADC_CCR_ADCPRE_0)
+#define ADC_CLOCK_SYNC_PCLK_DIV6    ((uint32_t)ADC_CCR_ADCPRE_1)
+#define ADC_CLOCK_SYNC_PCLK_DIV8    ((uint32_t)ADC_CCR_ADCPRE)
+/**
+  * @}
+  */ 
+
+/** @defgroup ADC_delay_between_2_sampling_phases ADC Delay Between 2 Sampling Phases
+  * @{
+  */ 
+#define ADC_TWOSAMPLINGDELAY_5CYCLES    ((uint32_t)0x00000000)
+#define ADC_TWOSAMPLINGDELAY_6CYCLES    ((uint32_t)ADC_CCR_DELAY_0)
+#define ADC_TWOSAMPLINGDELAY_7CYCLES    ((uint32_t)ADC_CCR_DELAY_1)
+#define ADC_TWOSAMPLINGDELAY_8CYCLES    ((uint32_t)(ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_9CYCLES    ((uint32_t)ADC_CCR_DELAY_2)
+#define ADC_TWOSAMPLINGDELAY_10CYCLES   ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_11CYCLES   ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_12CYCLES   ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_13CYCLES   ((uint32_t)ADC_CCR_DELAY_3)
+#define ADC_TWOSAMPLINGDELAY_14CYCLES   ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_15CYCLES   ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_16CYCLES   ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_17CYCLES   ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2))
+#define ADC_TWOSAMPLINGDELAY_18CYCLES   ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_19CYCLES   ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_20CYCLES   ((uint32_t)ADC_CCR_DELAY)
+/**
+  * @}
+  */ 
+
+/** @defgroup ADC_Resolution ADC Resolution
+  * @{
+  */ 
+#define ADC_RESOLUTION_12B  ((uint32_t)0x00000000)
+#define ADC_RESOLUTION_10B  ((uint32_t)ADC_CR1_RES_0)
+#define ADC_RESOLUTION_8B   ((uint32_t)ADC_CR1_RES_1)
+#define ADC_RESOLUTION_6B   ((uint32_t)ADC_CR1_RES)
+/**
+  * @}
+  */ 
+
+/** @defgroup ADC_External_trigger_edge_Regular ADC External Trigger Edge Regular
+  * @{
+  */ 
+#define ADC_EXTERNALTRIGCONVEDGE_NONE           ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING         ((uint32_t)ADC_CR2_EXTEN_0)
+#define ADC_EXTERNALTRIGCONVEDGE_FALLING        ((uint32_t)ADC_CR2_EXTEN_1)
+#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING  ((uint32_t)ADC_CR2_EXTEN)
+/**
+  * @}
+  */ 
+
+/** @defgroup ADC_External_trigger_Source_Regular ADC External Trigger Source Regular
+  * @{
+  */
+/* Note: Parameter ADC_SOFTWARE_START is a software parameter used for        */
+/*       compatibility with other STM32 devices.                              */
+
+
+#define ADC_EXTERNALTRIGCONV_T1_CC1    ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONV_T1_CC2    ((uint32_t)ADC_CR2_EXTSEL_0)
+#define ADC_EXTERNALTRIGCONV_T1_CC3    ((uint32_t)ADC_CR2_EXTSEL_1)
+#define ADC_EXTERNALTRIGCONV_T2_CC2    ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T5_TRGO   ((uint32_t)ADC_CR2_EXTSEL_2)
+#define ADC_EXTERNALTRIGCONV_T4_CC4    ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T3_CC4    ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_T8_TRGO   ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T8_TRGO2  ((uint32_t)ADC_CR2_EXTSEL_3)
+#define ADC_EXTERNALTRIGCONV_T1_TRGO   ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T1_TRGO2  ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_T2_TRGO   ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T4_TRGO   ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2))
+#define ADC_EXTERNALTRIGCONV_T6_TRGO   ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+
+#define ADC_EXTERNALTRIGCONV_EXT_IT11  ((uint32_t)ADC_CR2_EXTSEL)
+#define ADC_SOFTWARE_START             ((uint32_t)ADC_CR2_EXTSEL + 1)
+
+/**
+  * @}
+  */ 
+
+/** @defgroup ADC_data_align ADC Data Align
+  * @{
+  */ 
+#define ADC_DATAALIGN_RIGHT      ((uint32_t)0x00000000)
+#define ADC_DATAALIGN_LEFT       ((uint32_t)ADC_CR2_ALIGN)
+/**
+  * @}
+  */ 
+
+/** @defgroup ADC_channels ADC Common Channels
+  * @{
+  */ 
+#define ADC_CHANNEL_0           ((uint32_t)0x00000000)
+#define ADC_CHANNEL_1           ((uint32_t)ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_2           ((uint32_t)ADC_CR1_AWDCH_1)
+#define ADC_CHANNEL_3           ((uint32_t)(ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_4           ((uint32_t)ADC_CR1_AWDCH_2)
+#define ADC_CHANNEL_5           ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_6           ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_7           ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_8           ((uint32_t)ADC_CR1_AWDCH_3)
+#define ADC_CHANNEL_9           ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_10          ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_11          ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_12          ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2))
+#define ADC_CHANNEL_13          ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_14          ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_15          ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_16          ((uint32_t)ADC_CR1_AWDCH_4)
+#define ADC_CHANNEL_17          ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_18          ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1))
+
+#define ADC_CHANNEL_VREFINT     ((uint32_t)ADC_CHANNEL_17)
+#define ADC_CHANNEL_VBAT        ((uint32_t)ADC_CHANNEL_18)
+/**
+  * @}
+  */ 
+
+/** @defgroup ADC_sampling_times ADC Sampling Times
+  * @{
+  */ 
+#define ADC_SAMPLETIME_3CYCLES    ((uint32_t)0x00000000)
+#define ADC_SAMPLETIME_15CYCLES   ((uint32_t)ADC_SMPR1_SMP10_0)
+#define ADC_SAMPLETIME_28CYCLES   ((uint32_t)ADC_SMPR1_SMP10_1)
+#define ADC_SAMPLETIME_56CYCLES   ((uint32_t)(ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0))
+#define ADC_SAMPLETIME_84CYCLES   ((uint32_t)ADC_SMPR1_SMP10_2)
+#define ADC_SAMPLETIME_112CYCLES  ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0))
+#define ADC_SAMPLETIME_144CYCLES  ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1))
+#define ADC_SAMPLETIME_480CYCLES  ((uint32_t)ADC_SMPR1_SMP10)
+/**
+  * @}
+  */ 
+
+  /** @defgroup ADC_EOCSelection ADC EOC Selection
+  * @{
+  */ 
+#define ADC_EOC_SEQ_CONV              ((uint32_t)0x00000000)
+#define ADC_EOC_SINGLE_CONV           ((uint32_t)0x00000001)
+#define ADC_EOC_SINGLE_SEQ_CONV       ((uint32_t)0x00000002)  /*!< reserved for future use */
+/**
+  * @}
+  */ 
+
+/** @defgroup ADC_Event_type ADC Event Type
+  * @{
+  */ 
+#define ADC_AWD_EVENT             ((uint32_t)ADC_FLAG_AWD)
+#define ADC_OVR_EVENT             ((uint32_t)ADC_FLAG_OVR)
+/**
+  * @}
+  */
+
+/** @defgroup ADC_analog_watchdog_selection ADC Analog Watchdog Selection
+  * @{
+  */ 
+#define ADC_ANALOGWATCHDOG_SINGLE_REG         ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC       ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC    ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG            ((uint32_t)ADC_CR1_AWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_INJEC          ((uint32_t)ADC_CR1_JAWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC       ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_NONE               ((uint32_t)0x00000000)
+/**
+  * @}
+  */ 
+    
+/** @defgroup ADC_interrupts_definition ADC Interrupts Definition
+  * @{
+  */ 
+#define ADC_IT_EOC      ((uint32_t)ADC_CR1_EOCIE)  
+#define ADC_IT_AWD      ((uint32_t)ADC_CR1_AWDIE) 
+#define ADC_IT_JEOC     ((uint32_t)ADC_CR1_JEOCIE)
+#define ADC_IT_OVR      ((uint32_t)ADC_CR1_OVRIE) 
+/**
+  * @}
+  */ 
+    
+/** @defgroup ADC_flags_definition ADC Flags Definition
+  * @{
+  */ 
+#define ADC_FLAG_AWD    ((uint32_t)ADC_SR_AWD)
+#define ADC_FLAG_EOC    ((uint32_t)ADC_SR_EOC)
+#define ADC_FLAG_JEOC   ((uint32_t)ADC_SR_JEOC)
+#define ADC_FLAG_JSTRT  ((uint32_t)ADC_SR_JSTRT)
+#define ADC_FLAG_STRT   ((uint32_t)ADC_SR_STRT)
+#define ADC_FLAG_OVR    ((uint32_t)ADC_SR_OVR)
+/**
+  * @}
+  */ 
+
+/** @defgroup ADC_channels_type ADC Channels Type
+  * @{
+  */ 
+#define ADC_ALL_CHANNELS      ((uint32_t)0x00000001)
+#define ADC_REGULAR_CHANNELS  ((uint32_t)0x00000002) /*!< reserved for future use */
+#define ADC_INJECTED_CHANNELS ((uint32_t)0x00000003) /*!< reserved for future use */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+  * @{
+  */
+	
+/** @brief Reset ADC handle state
+  * @param  __HANDLE__: ADC handle
+  * @retval None
+  */
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+
+/**
+  * @brief  Enable the ADC peripheral.
+  * @param  __HANDLE__: ADC handle
+  * @retval None
+  */
+#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 |=  ADC_CR2_ADON)
+
+/**
+  * @brief  Disable the ADC peripheral.
+  * @param  __HANDLE__: ADC handle
+  * @retval None
+  */
+#define __HAL_ADC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 &=  ~ADC_CR2_ADON)
+
+/**
+  * @brief  Enable the ADC end of conversion interrupt.
+  * @param  __HANDLE__: specifies the ADC Handle.
+  * @param  __INTERRUPT__: ADC Interrupt.
+  * @retval None
+  */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the ADC end of conversion interrupt.
+  * @param  __HANDLE__: specifies the ADC Handle.
+  * @param  __INTERRUPT__: ADC interrupt.
+  * @retval None
+  */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__))
+
+/** @brief  Check if the specified ADC interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the ADC Handle.
+  * @param  __INTERRUPT__: specifies the ADC interrupt source to check.
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)  (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @brief  Clear the ADC's pending flags.
+  * @param  __HANDLE__: specifies the ADC Handle.
+  * @param  __FLAG__: ADC flag.
+  * @retval None
+  */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+  * @brief  Get the selected ADC's flag status.
+  * @param  __HANDLE__: specifies the ADC Handle.
+  * @param  __FLAG__: ADC flag.
+  * @retval None
+  */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+  * @}
+  */
+
+/* Include ADC HAL Extension module */
+#include "stm32f7xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup ADC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions ***********************************/
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void       HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void       HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+/**
+  * @}
+  */
+
+/** @addtogroup ADC_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+void              HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+uint32_t          HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+void       HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void       HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void       HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void       HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+/**
+  * @}
+  */
+
+/** @addtogroup ADC_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+/**
+  * @}
+  */
+
+/** @addtogroup ADC_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral State functions ***************************************************/
+uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup ADC_Private_Constants ADC Private Constants
+  * @{
+  */
+/* Delay for ADC stabilization time.                                        */
+/* Maximum delay is 1us (refer to device datasheet, parameter tSTAB).       */
+/* Unit: us                                                                 */
+#define ADC_STAB_DELAY_US               ((uint32_t) 3)
+/* Delay for temperature sensor stabilization time.                         */
+/* Maximum delay is 10us (refer to device datasheet, parameter tSTART).     */
+/* Unit: us                                                                 */
+#define ADC_TEMPSENSOR_DELAY_US         ((uint32_t) 10)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup ADC_Private_Macros ADC Private Macros
+  * @{
+  */
+/* Macro reserved for internal HAL driver usage, not intended to be used in
+   code of final user */
+
+/**
+  * @brief Verification of ADC state: enabled or disabled
+  * @param __HANDLE__: ADC handle
+  * @retval SET (ADC enabled) or RESET (ADC disabled)
+  */
+#define ADC_IS_ENABLE(__HANDLE__)                                              \
+  ((( ((__HANDLE__)->Instance->SR & ADC_SR_ADONS) == ADC_SR_ADONS )            \
+  ) ? SET : RESET)
+
+/**
+  * @brief Test if conversion trigger of regular group is software start
+  *        or external trigger.
+  * @param __HANDLE__: ADC handle
+  * @retval SET (software start) or RESET (external trigger)
+  */
+#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__)                              \
+  (((__HANDLE__)->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
+
+/**
+  * @brief Test if conversion trigger of injected group is software start
+  *        or external trigger.
+  * @param __HANDLE__: ADC handle
+  * @retval SET (software start) or RESET (external trigger)
+  */
+#define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__)                             \
+  (((__HANDLE__)->Instance->CR2 & ADC_CR2_JEXTEN) == RESET)
+
+/**
+  * @brief Simultaneously clears and sets specific bits of the handle State
+  * @note: ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(),
+  *        the first parameter is the ADC handle State, the second parameter is the
+  *        bit field to clear, the third and last parameter is the bit field to set.
+  * @retval None
+  */
+#define ADC_STATE_CLR_SET MODIFY_REG
+
+/**
+  * @brief Clear ADC error code (set it to error code: "no error")
+  * @param __HANDLE__: ADC handle
+  * @retval None
+  */
+#define ADC_CLEAR_ERRORCODE(__HANDLE__)                                        \
+  ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
+#define IS_ADC_CLOCKPRESCALER(__ADC_CLOCK__)     (((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV2) || \
+                                                  ((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV4) || \
+                                                  ((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV6) || \
+                                                  ((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV8))
+#define IS_ADC_SAMPLING_DELAY(__DELAY__) (((__DELAY__) == ADC_TWOSAMPLINGDELAY_5CYCLES)  || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_6CYCLES)  || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_7CYCLES)  || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_8CYCLES)  || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_9CYCLES)  || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_12CYCLES) || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_13CYCLES) || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_14CYCLES) || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_15CYCLES) || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_16CYCLES) || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_17CYCLES) || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_18CYCLES) || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_19CYCLES) || \
+                                          ((__DELAY__) == ADC_TWOSAMPLINGDELAY_20CYCLES))
+#define IS_ADC_RESOLUTION(__RESOLUTION__) (((__RESOLUTION__) == ADC_RESOLUTION_12B) || \
+                                           ((__RESOLUTION__) == ADC_RESOLUTION_10B) || \
+                                           ((__RESOLUTION__) == ADC_RESOLUTION_8B)  || \
+                                           ((__RESOLUTION__) == ADC_RESOLUTION_6B))			
+#define IS_ADC_EXT_TRIG_EDGE(__EDGE__) (((__EDGE__) == ADC_EXTERNALTRIGCONVEDGE_NONE)    || \
+                                        ((__EDGE__) == ADC_EXTERNALTRIGCONVEDGE_RISING)  || \
+                                        ((__EDGE__) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
+                                        ((__EDGE__) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING))
+#define IS_ADC_EXT_TRIG(__REGTRIG__) (((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T1_CC1)   || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T1_CC2)   || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T1_CC3)   || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T2_CC2)   || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T5_TRGO)  || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T4_CC4)   || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T3_CC4) || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T8_TRGO)  || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T8_TRGO2) || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T1_TRGO)  || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T2_TRGO)  || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T4_TRGO)  || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_T6_TRGO)  || \
+                                      ((__REGTRIG__) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+																			((__REGTRIG__) == ADC_SOFTWARE_START))
+#define IS_ADC_DATA_ALIGN(__ALIGN__) (((__ALIGN__) == ADC_DATAALIGN_RIGHT) || \
+                                      ((__ALIGN__) == ADC_DATAALIGN_LEFT))		
+                                      									
+#define IS_ADC_SAMPLE_TIME(__TIME__) (((__TIME__) == ADC_SAMPLETIME_3CYCLES)   || \
+                                      ((__TIME__) == ADC_SAMPLETIME_15CYCLES)  || \
+                                      ((__TIME__) == ADC_SAMPLETIME_28CYCLES)  || \
+                                      ((__TIME__) == ADC_SAMPLETIME_56CYCLES)  || \
+                                      ((__TIME__) == ADC_SAMPLETIME_84CYCLES)  || \
+                                      ((__TIME__) == ADC_SAMPLETIME_112CYCLES) || \
+                                      ((__TIME__) == ADC_SAMPLETIME_144CYCLES) || \
+                                      ((__TIME__) == ADC_SAMPLETIME_480CYCLES))	
+#define IS_ADC_EOCSelection(__EOCSelection__) (((__EOCSelection__) == ADC_EOC_SINGLE_CONV)   || \
+                                               ((__EOCSelection__) == ADC_EOC_SEQ_CONV)  || \
+                                               ((__EOCSelection__) == ADC_EOC_SINGLE_SEQ_CONV))	
+#define IS_ADC_EVENT_TYPE(__EVENT__) (((__EVENT__) == ADC_AWD_EVENT) || \
+                                      ((__EVENT__) == ADC_OVR_EVENT))		
+#define IS_ADC_ANALOG_WATCHDOG(__WATCHDOG__) (((__WATCHDOG__) == ADC_ANALOGWATCHDOG_SINGLE_REG)        || \
+                                              ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_SINGLE_INJEC)      || \
+                                              ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC)   || \
+                                              ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_ALL_REG)           || \
+                                              ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_ALL_INJEC)         || \
+                                              ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_ALL_REGINJEC)      || \
+                                              ((__WATCHDOG__) == ADC_ANALOGWATCHDOG_NONE))
+#define IS_ADC_CHANNELS_TYPE(CHANNEL_TYPE) (((CHANNEL_TYPE) == ADC_ALL_CHANNELS) || \
+                                            ((CHANNEL_TYPE) == ADC_REGULAR_CHANNELS) || \
+                                            ((CHANNEL_TYPE) == ADC_INJECTED_CHANNELS))
+#define IS_ADC_THRESHOLD(__THRESHOLD__) ((__THRESHOLD__) <= ((uint32_t)0xFFF))
+#define IS_ADC_REGULAR_LENGTH(__LENGTH__) (((__LENGTH__) >= ((uint32_t)1)) && ((__LENGTH__) <= ((uint32_t)16)))
+#define IS_ADC_REGULAR_RANK(__RANK__) (((__RANK__) >= ((uint32_t)1)) && ((__RANK__) <= ((uint32_t)16)))
+#define IS_ADC_REGULAR_DISC_NUMBER(__NUMBER__) (((__NUMBER__) >= ((uint32_t)1)) && ((__NUMBER__) <= ((uint32_t)8)))
+#define IS_ADC_RANGE(__RESOLUTION__, __ADC_VALUE__)                                     \
+   ((((__RESOLUTION__) == ADC_RESOLUTION_12B) && ((__ADC_VALUE__) <= ((uint32_t)0x0FFF))) || \
+    (((__RESOLUTION__) == ADC_RESOLUTION_10B) && ((__ADC_VALUE__) <= ((uint32_t)0x03FF))) || \
+    (((__RESOLUTION__) == ADC_RESOLUTION_8B)  && ((__ADC_VALUE__) <= ((uint32_t)0x00FF))) || \
+    (((__RESOLUTION__) == ADC_RESOLUTION_6B)  && ((__ADC_VALUE__) <= ((uint32_t)0x003F))))
+
+/**
+  * @brief  Set ADC Regular channel sequence length.
+  * @param  _NbrOfConversion_: Regular channel sequence length. 
+  * @retval None
+  */
+#define ADC_SQR1(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1) << 20)
+
+/**
+  * @brief  Set the ADC's sample time for channel numbers between 10 and 18.
+  * @param  _SAMPLETIME_: Sample time parameter.
+  * @param  _CHANNELNB_: Channel number.  
+  * @retval None
+  */
+#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (((uint32_t)((uint16_t)(_CHANNELNB_))) - 10)))
+
+/**
+  * @brief  Set the ADC's sample time for channel numbers between 0 and 9.
+  * @param  _SAMPLETIME_: Sample time parameter.
+  * @param  _CHANNELNB_: Channel number.  
+  * @retval None
+  */
+#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((uint32_t)((uint16_t)(_CHANNELNB_)))))
+
+/**
+  * @brief  Set the selected regular channel rank for rank between 1 and 6.
+  * @param  _CHANNELNB_: Channel number.
+  * @param  _RANKNB_: Rank number.    
+  * @retval None
+  */
+#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 1)))
+
+/**
+  * @brief  Set the selected regular channel rank for rank between 7 and 12.
+  * @param  _CHANNELNB_: Channel number.
+  * @param  _RANKNB_: Rank number.    
+  * @retval None
+  */
+#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 7)))
+
+/**
+  * @brief  Set the selected regular channel rank for rank between 13 and 16.
+  * @param  _CHANNELNB_: Channel number.
+  * @param  _RANKNB_: Rank number.    
+  * @retval None
+  */
+#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 13)))
+
+/**
+  * @brief  Enable ADC continuous conversion mode.
+  * @param  _CONTINUOUS_MODE_: Continuous mode.
+  * @retval None
+  */
+#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1)
+
+/**
+  * @brief  Configures the number of discontinuous conversions for the regular group channels.
+  * @param  _NBR_DISCONTINUOUSCONV_: Number of discontinuous conversions.
+  * @retval None
+  */
+#define ADC_CR1_DISCONTINUOUS(_NBR_DISCONTINUOUSCONV_) (((_NBR_DISCONTINUOUSCONV_) - 1) << POSITION_VAL(ADC_CR1_DISCNUM))
+
+/**
+  * @brief  Enable ADC scan mode.
+  * @param  _SCANCONV_MODE_: Scan conversion mode.
+  * @retval None
+  */
+#define ADC_CR1_SCANCONV(_SCANCONV_MODE_) ((_SCANCONV_MODE_) << 8)
+
+/**
+  * @brief  Enable the ADC end of conversion selection.
+  * @param  _EOCSelection_MODE_: End of conversion selection mode.
+  * @retval None
+  */
+#define ADC_CR2_EOCSelection(_EOCSelection_MODE_) ((_EOCSelection_MODE_) << 10)
+
+/**
+  * @brief  Enable the ADC DMA continuous request.
+  * @param  _DMAContReq_MODE_: DMA continuous request mode.
+  * @retval None
+  */
+#define ADC_CR2_DMAContReq(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 9)
+
+/**
+  * @brief Return resolution bits in CR1 register.
+  * @param __HANDLE__: ADC handle
+  * @retval None
+  */
+#define ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CR1) & ADC_CR1_RES)
+																
+/**
+  * @}
+  */
+	
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup ADC_Private_Functions ADC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+	
+/**
+  * @}
+  */
+	
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F7xx_ADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_adc_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1069 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_adc_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   This file provides firmware functions to manage the following 
+  *          functionalities of the ADC extension peripheral:
+  *           + Extended features functions
+  *         
+  @verbatim
+  ==============================================================================
+                    ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    (#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit():
+       (##) Enable the ADC interface clock using __HAL_RCC_ADC_CLK_ENABLE()
+       (##) ADC pins configuration
+             (+++) Enable the clock for the ADC GPIOs using the following function:
+                   __HAL_RCC_GPIOx_CLK_ENABLE()  
+             (+++) Configure these ADC pins in analog mode using HAL_GPIO_Init() 
+       (##) In case of using interrupts (e.g. HAL_ADC_Start_IT())
+             (+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority()
+             (+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ()
+             (+++) In ADC IRQ handler, call HAL_ADC_IRQHandler()
+      (##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA())
+             (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE()
+             (+++) Configure and enable two DMA streams stream for managing data
+                 transfer from peripheral to memory (output stream)
+             (+++) Associate the initialized DMA handle to the ADC DMA handle
+                 using  __HAL_LINKDMA()
+             (+++) Configure the priority and enable the NVIC for the transfer complete
+                 interrupt on the two DMA Streams. The output stream should have higher
+                 priority than the input stream.                  
+     (#) Configure the ADC Prescaler, conversion resolution and data alignment 
+         using the HAL_ADC_Init() function. 
+  
+     (#) Configure the ADC Injected channels group features, use HAL_ADC_Init()
+         and HAL_ADC_ConfigChannel() functions.
+         
+     (#) Three operation modes are available within this driver :     
+  
+     *** Polling mode IO operation ***
+     =================================
+     [..]    
+       (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart() 
+       (+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage
+           user can specify the value of timeout according to his end application      
+       (+) To read the ADC converted values, use the HAL_ADCEx_InjectedGetValue() function.
+       (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop()
+  
+     *** Interrupt mode IO operation ***    
+     ===================================
+     [..]    
+       (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_IT() 
+       (+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine
+       (+) At ADC end of conversion HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can 
+            add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback 
+       (+) In case of ADC Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can 
+            add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback
+       (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_IT()
+       
+            
+     *** DMA mode IO operation ***    
+     ==============================
+     [..]    
+       (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_DMA(), at this stage the user specify the length 
+           of data to be transferred at each end of conversion 
+       (+) At The end of data transfer ba HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can 
+            add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback 
+       (+) In case of transfer Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can 
+            add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback
+        (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_DMA()
+        
+     *** Multi mode ADCs Regular channels configuration ***
+     ======================================================
+     [..]        
+       (+) Select the Multi mode ADC regular channels features (dual or triple mode)  
+          and configure the DMA mode using HAL_ADCEx_MultiModeConfigChannel() functions. 
+       (+) Start the ADC peripheral using HAL_ADCEx_MultiModeStart_DMA(), at this stage the user specify the length 
+           of data to be transferred at each end of conversion           
+       (+) Read the ADCs converted values using the HAL_ADCEx_MultiModeGetValue() function.
+  
+  
+    @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup ADCEx ADCEx
+  * @brief ADC Extended driver modules
+  * @{
+  */ 
+
+#ifdef HAL_ADC_MODULE_ENABLED
+    
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/ 
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup ADCEx_Private_Functions
+  * @{
+  */
+/* Private function prototypes -----------------------------------------------*/
+static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma);
+static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma);
+static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma); 
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Functions ADC Exported Functions
+  * @{
+  */
+
+/** @defgroup ADCEx_Exported_Functions_Group1  Extended features functions 
+  *  @brief    Extended features functions  
+  *
+@verbatim   
+ ===============================================================================
+                 ##### Extended features functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Start conversion of injected channel.
+      (+) Stop conversion of injected channel.
+      (+) Start multimode and enable DMA transfer.
+      (+) Stop multimode and disable DMA transfer.
+      (+) Get result of injected channel conversion.
+      (+) Get result of multimode conversion.
+      (+) Configure injected channels.
+      (+) Configure multimode.
+               
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables the selected ADC software start conversion of the injected channels.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc)
+{
+  __IO uint32_t counter = 0;
+  uint32_t tmp1 = 0, tmp2 = 0;
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  /* Enable the ADC peripheral */
+  
+  /* Check if ADC peripheral is disabled in order to enable it and wait during 
+     Tstab time the ADC's stabilization */
+  if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+  {  
+    /* Enable the Peripheral */
+    __HAL_ADC_ENABLE(hadc);
+    
+    /* Delay for ADC stabilization time */
+    /* Compute number of CPU cycles to wait for */
+    counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
+    while(counter != 0)
+    {
+      counter--;
+    }
+  }
+  
+  /* Start conversion if ADC is effectively enabled */
+  if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
+  {
+    /* Set ADC state                                                          */
+    /* - Clear state bitfield related to injected group conversion results    */
+    /* - Set state bitfield related to injected operation                     */
+    ADC_STATE_CLR_SET(hadc->State,
+                      HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC,
+                      HAL_ADC_STATE_INJ_BUSY);
+    
+    /* Check if a regular conversion is ongoing */
+    /* Note: On this device, there is no ADC error code fields related to     */
+    /*       conversions on group injected only. In case of conversion on     */
+    /*       going on group regular, no error code is reset.                  */
+    if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY))
+    {
+      /* Reset ADC all error code fields */
+      ADC_CLEAR_ERRORCODE(hadc);
+    }
+    
+    /* Process unlocked */
+    /* Unlock before starting ADC conversions: in case of potential           */
+    /* interruption, to let the process to ADC IRQ Handler.                   */
+    __HAL_UNLOCK(hadc);
+    
+    /* Clear injected group conversion flag */
+    /* (To ensure of no unknown state from potential previous ADC operations) */
+    __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC);
+    
+    /* Check if Multimode enabled */
+    if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+    {
+      tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+      tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+      if(tmp1 && tmp2)
+      {
+        /* Enable the selected ADC software conversion for injected group */
+        hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
+      }
+    }
+    else
+    {
+      tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+      tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+      if((hadc->Instance == ADC1) && tmp1 && tmp2)  
+      {
+        /* Enable the selected ADC software conversion for injected group */
+        hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
+      }
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the interrupt and starts ADC conversion of injected channels.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  *
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc)
+{
+  __IO uint32_t counter = 0;
+  uint32_t tmp1 = 0, tmp2 = 0;
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  /* Enable the ADC peripheral */
+  
+  /* Check if ADC peripheral is disabled in order to enable it and wait during 
+     Tstab time the ADC's stabilization */
+  if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+  {  
+    /* Enable the Peripheral */
+    __HAL_ADC_ENABLE(hadc);
+    
+    /* Delay for ADC stabilization time */
+    /* Compute number of CPU cycles to wait for */
+    counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
+    while(counter != 0)
+    {
+      counter--;
+    }
+  }
+  
+  /* Start conversion if ADC is effectively enabled */
+  if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
+  {
+    /* Set ADC state                                                          */
+    /* - Clear state bitfield related to injected group conversion results    */
+    /* - Set state bitfield related to injected operation                     */
+    ADC_STATE_CLR_SET(hadc->State,
+                      HAL_ADC_STATE_READY | HAL_ADC_STATE_INJ_EOC,
+                      HAL_ADC_STATE_INJ_BUSY);
+    
+    /* Check if a regular conversion is ongoing */
+    /* Note: On this device, there is no ADC error code fields related to     */
+    /*       conversions on group injected only. In case of conversion on     */
+    /*       going on group regular, no error code is reset.                  */
+    if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY))
+    {
+      /* Reset ADC all error code fields */
+      ADC_CLEAR_ERRORCODE(hadc);
+    }
+    
+    /* Process unlocked */
+    /* Unlock before starting ADC conversions: in case of potential           */
+    /* interruption, to let the process to ADC IRQ Handler.                   */
+    __HAL_UNLOCK(hadc);
+    
+    /* Clear injected group conversion flag */
+    /* (To ensure of no unknown state from potential previous ADC operations) */
+    __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC);
+    
+    /* Enable end of conversion interrupt for injected channels */
+    __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC);
+    
+    /* Check if Multimode enabled */
+    if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
+    {
+      tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+      tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+      if(tmp1 && tmp2)
+      {
+        /* Enable the selected ADC software conversion for injected group */
+        hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
+      }
+    }
+    else
+    {
+      tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
+      tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
+      if((hadc->Instance == ADC1) && tmp1 && tmp2)  
+      {
+        /* Enable the selected ADC software conversion for injected group */
+        hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
+      }
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop conversion of injected channels. Disable ADC peripheral if
+  *         no regular conversion is on going.
+  * @note   If ADC must be disabled and if conversion is on going on 
+  *         regular group, function HAL_ADC_Stop must be used to stop both
+  *         injected and regular groups, and disable the ADC.
+  * @note   If injected group mode auto-injection is enabled,
+  *         function HAL_ADC_Stop must be used.
+  * @note   In case of auto-injection mode, HAL_ADC_Stop must be used.
+  * @param  hadc: ADC handle
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc)
+{
+  HAL_StatusTypeDef tmp_hal_status = HAL_OK;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+    
+  /* Stop potential conversion and disable ADC peripheral                     */
+  /* Conditioned to:                                                          */
+  /* - No conversion on the other group (regular group) is intended to        */
+  /*   continue (injected and regular groups stop conversion and ADC disable  */
+  /*   are common)                                                            */
+  /* - In case of auto-injection mode, HAL_ADC_Stop must be used.             */
+  if(((hadc->State & HAL_ADC_STATE_REG_BUSY) == RESET)  &&
+     HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO)   )
+  {
+    /* Stop potential conversion on going, on regular and injected groups */
+    /* Disable ADC peripheral */
+    __HAL_ADC_DISABLE(hadc);
+    
+    /* Check if ADC is effectively disabled */
+    if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+    {
+      /* Set ADC state */
+      ADC_STATE_CLR_SET(hadc->State,
+                        HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+                        HAL_ADC_STATE_READY);
+    }
+  }
+  else
+  {
+    /* Update ADC state machine to error */
+    SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
+      
+    tmp_hal_status = HAL_ERROR;
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+  
+  /* Return function status */
+  return tmp_hal_status;
+}
+
+/**
+  * @brief  Poll for injected conversion complete
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  Timeout: Timeout value in millisecond.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */ 
+  tickstart = HAL_GetTick();
+
+  /* Check End of conversion flag */
+  while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC)))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hadc->State= HAL_ADC_STATE_TIMEOUT;
+        /* Process unlocked */
+        __HAL_UNLOCK(hadc);
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Clear injected group conversion flag */
+  __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JSTRT | ADC_FLAG_JEOC);
+    
+  /* Update ADC state machine */
+  SET_BIT(hadc->State, HAL_ADC_STATE_INJ_EOC);
+  
+  /* Determine whether any further conversion upcoming on group injected      */
+  /* by external trigger, continuous mode or scan sequence on going.          */
+  /* Note: On STM32F7, there is no independent flag of end of sequence.       */
+  /*       The test of scan sequence on going is done either with scan        */
+  /*       sequence disabled or with end of conversion flag set to            */
+  /*       of end of sequence.                                                */
+  if(ADC_IS_SOFTWARE_START_INJECTED(hadc)                    &&
+     (HAL_IS_BIT_CLR(hadc->Instance->JSQR, ADC_JSQR_JL)  ||
+      HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS)    ) &&
+     (HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO) &&
+      (ADC_IS_SOFTWARE_START_REGULAR(hadc)       &&
+      (hadc->Init.ContinuousConvMode == DISABLE)   )       )   )
+  {
+    /* Set ADC state */
+    CLEAR_BIT(hadc->State, HAL_ADC_STATE_INJ_BUSY);
+    
+    if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_REG_BUSY))
+    { 
+      SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+    }
+  }
+  
+  /* Return ADC state */
+  return HAL_OK;
+}      
+  
+/**
+  * @brief  Stop conversion of injected channels, disable interruption of 
+  *         end-of-conversion. Disable ADC peripheral if no regular conversion
+  *         is on going.
+  * @note   If ADC must be disabled and if conversion is on going on 
+  *         regular group, function HAL_ADC_Stop must be used to stop both
+  *         injected and regular groups, and disable the ADC.
+  * @note   If injected group mode auto-injection is enabled,
+  *         function HAL_ADC_Stop must be used.
+  * @param  hadc: ADC handle
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc)
+{
+  HAL_StatusTypeDef tmp_hal_status = HAL_OK;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+    
+  /* Stop potential conversion and disable ADC peripheral                     */
+  /* Conditioned to:                                                          */
+  /* - No conversion on the other group (regular group) is intended to        */
+  /*   continue (injected and regular groups stop conversion and ADC disable  */
+  /*   are common)                                                            */
+  /* - In case of auto-injection mode, HAL_ADC_Stop must be used.             */ 
+  if(((hadc->State & HAL_ADC_STATE_REG_BUSY) == RESET)  &&
+     HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO)   )
+  {
+    /* Stop potential conversion on going, on regular and injected groups */
+    /* Disable ADC peripheral */
+    __HAL_ADC_DISABLE(hadc);
+    
+    /* Check if ADC is effectively disabled */
+    if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+    {
+      /* Disable ADC end of conversion interrupt for injected channels */
+      __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC);
+      
+      /* Set ADC state */
+      ADC_STATE_CLR_SET(hadc->State,
+                        HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+                        HAL_ADC_STATE_READY);
+    }
+  }
+  else
+  {
+    /* Update ADC state machine to error */
+    SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
+      
+    tmp_hal_status = HAL_ERROR;
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+  
+  /* Return function status */
+  return tmp_hal_status;
+}
+
+/**
+  * @brief  Gets the converted value from data register of injected channel.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  InjectedRank: the ADC injected rank.
+  *          This parameter can be one of the following values:
+  *            @arg ADC_INJECTED_RANK_1: Injected Channel1 selected
+  *            @arg ADC_INJECTED_RANK_2: Injected Channel2 selected
+  *            @arg ADC_INJECTED_RANK_3: Injected Channel3 selected
+  *            @arg ADC_INJECTED_RANK_4: Injected Channel4 selected
+  * @retval None
+  */
+uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank)
+{
+  __IO uint32_t tmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_INJECTED_RANK(InjectedRank));
+  
+  /* Clear injected group conversion flag to have similar behaviour as        */
+  /* regular group: reading data register also clears end of conversion flag. */
+  __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_JEOC);
+  
+  /* Return the selected ADC converted value */ 
+  switch(InjectedRank)
+  {  
+    case ADC_INJECTED_RANK_4:
+    {
+      tmp =  hadc->Instance->JDR4;
+    }  
+    break;
+    case ADC_INJECTED_RANK_3: 
+    {  
+      tmp =  hadc->Instance->JDR3;
+    }  
+    break;
+    case ADC_INJECTED_RANK_2: 
+    {  
+      tmp =  hadc->Instance->JDR2;
+    }
+    break;
+    case ADC_INJECTED_RANK_1:
+    {
+      tmp =  hadc->Instance->JDR1;
+    }
+    break;
+    default:
+    break;  
+  }
+  return tmp;
+}
+
+/**
+  * @brief  Enables ADC DMA request after last transfer (Multi-ADC mode) and enables ADC peripheral
+  * 
+  * @note   Caution: This function must be used only with the ADC master.  
+  *
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  pData:   Pointer to buffer in which transferred from ADC peripheral to memory will be stored. 
+  * @param  Length:  The length of data to be transferred from ADC peripheral to memory.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length)
+{
+  __IO uint32_t counter = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
+  assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
+  assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests));
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  /* Check if ADC peripheral is disabled in order to enable it and wait during 
+     Tstab time the ADC's stabilization */
+  if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
+  {  
+    /* Enable the Peripheral */
+    __HAL_ADC_ENABLE(hadc);
+    
+    /* Delay for temperature sensor stabilization time */
+    /* Compute number of CPU cycles to wait for */
+    counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
+    while(counter != 0)
+    {
+      counter--;
+    }
+  }
+  
+  /* Start conversion if ADC is effectively enabled */
+  if(HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_ADON))
+  {
+    /* Set ADC state                                                          */
+    /* - Clear state bitfield related to regular group conversion results     */
+    /* - Set state bitfield related to regular group operation                */
+    ADC_STATE_CLR_SET(hadc->State,
+                      HAL_ADC_STATE_READY | HAL_ADC_STATE_REG_EOC | HAL_ADC_STATE_REG_OVR,
+                      HAL_ADC_STATE_REG_BUSY);
+    
+    /* If conversions on group regular are also triggering group injected,    */
+    /* update ADC state.                                                      */
+    if (READ_BIT(hadc->Instance->CR1, ADC_CR1_JAUTO) != RESET)
+    {
+      ADC_STATE_CLR_SET(hadc->State, HAL_ADC_STATE_INJ_EOC, HAL_ADC_STATE_INJ_BUSY);  
+    }
+    
+    /* State machine update: Check if an injected conversion is ongoing */
+    if (HAL_IS_BIT_SET(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+    {
+      /* Reset ADC error code fields related to conversions on group regular */
+      CLEAR_BIT(hadc->ErrorCode, (HAL_ADC_ERROR_OVR | HAL_ADC_ERROR_DMA));         
+    }
+    else
+    {
+      /* Reset ADC all error code fields */
+      ADC_CLEAR_ERRORCODE(hadc);
+    }
+    
+    /* Process unlocked */
+    /* Unlock before starting ADC conversions: in case of potential           */
+    /* interruption, to let the process to ADC IRQ Handler.                   */
+    __HAL_UNLOCK(hadc);
+    
+    /* Set the DMA transfer complete callback */
+    hadc->DMA_Handle->XferCpltCallback = ADC_MultiModeDMAConvCplt;
+    
+    /* Set the DMA half transfer complete callback */
+    hadc->DMA_Handle->XferHalfCpltCallback = ADC_MultiModeDMAHalfConvCplt;
+    
+    /* Set the DMA error callback */
+    hadc->DMA_Handle->XferErrorCallback = ADC_MultiModeDMAError ;
+    
+    /* Manage ADC and DMA start: ADC overrun interruption, DMA start, ADC     */
+    /* start (in case of SW start):                                           */
+    
+    /* Clear regular group conversion flag and overrun flag */
+    /* (To ensure of no unknown state from potential previous ADC operations) */
+    __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_EOC);
+
+    /* Enable ADC overrun interrupt */
+    __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
+    
+    if (hadc->Init.DMAContinuousRequests != DISABLE)
+    {
+      /* Enable the selected ADC DMA request after last transfer */
+      ADC->CCR |= ADC_CCR_DDS;
+    }
+    else
+    {
+      /* Disable the selected ADC EOC rising on each regular channel conversion */
+      ADC->CCR &= ~ADC_CCR_DDS;
+    }
+    
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&ADC->CDR, (uint32_t)pData, Length);
+    
+    /* if no external trigger present enable software conversion of regular channels */
+    if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET) 
+    {
+      /* Enable the selected ADC software conversion for regular group */
+      hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables ADC DMA (multi-ADC mode) and disables ADC peripheral    
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc)
+{
+  HAL_StatusTypeDef tmp_hal_status = HAL_OK;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  /* Stop potential conversion on going, on regular and injected groups */
+  /* Disable ADC peripheral */
+  __HAL_ADC_DISABLE(hadc);
+  
+  /* Check if ADC is effectively disabled */
+  if(HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_ADON))
+  {
+    /* Disable the selected ADC DMA mode for multimode */
+    ADC->CCR &= ~ADC_CCR_DDS;
+    
+    /* Disable the DMA channel (in case of DMA in circular mode or stop while */
+    /* DMA transfer is on going)                                              */
+    tmp_hal_status = HAL_DMA_Abort(hadc->DMA_Handle);
+    
+    /* Disable ADC overrun interrupt */
+    __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
+    
+    /* Set ADC state */
+    ADC_STATE_CLR_SET(hadc->State,
+                      HAL_ADC_STATE_REG_BUSY | HAL_ADC_STATE_INJ_BUSY,
+                      HAL_ADC_STATE_READY);
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+  
+  /* Return function status */
+  return tmp_hal_status;
+}
+
+/**
+  * @brief  Returns the last ADC1, ADC2 and ADC3 regular conversions results 
+  *         data in the selected multi mode.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval The converted data value.
+  */
+uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc)
+{
+  /* Return the multi mode conversion value */
+  return ADC->CDR;
+}
+
+/**
+  * @brief  Injected conversion complete callback in non blocking mode 
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @retval None
+  */
+__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hadc);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_ADC_InjectedConvCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Configures for the selected ADC injected channel its corresponding
+  *         rank in the sequencer and its sample time.
+  * @param  hadc: pointer to a ADC_HandleTypeDef structure that contains
+  *         the configuration information for the specified ADC.
+  * @param  sConfigInjected: ADC configuration structure for injected channel. 
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_InjectionConfTypeDef* sConfigInjected)
+{
+  
+#ifdef USE_FULL_ASSERT  
+  uint32_t tmp = 0;
+#endif /* USE_FULL_ASSERT  */
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_CHANNEL(sConfigInjected->InjectedChannel));
+  assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank));
+  assert_param(IS_ADC_SAMPLE_TIME(sConfigInjected->InjectedSamplingTime));
+  assert_param(IS_ADC_EXT_INJEC_TRIG(sConfigInjected->ExternalTrigInjecConv));
+  assert_param(IS_ADC_INJECTED_LENGTH(sConfigInjected->InjectedNbrOfConversion));
+  assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->AutoInjectedConv));
+  assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjectedDiscontinuousConvMode));
+
+#ifdef USE_FULL_ASSERT
+  tmp = ADC_GET_RESOLUTION(hadc);
+  assert_param(IS_ADC_RANGE(tmp, sConfigInjected->InjectedOffset));
+#endif /* USE_FULL_ASSERT  */
+
+  if(sConfigInjected->ExternalTrigInjecConvEdge != ADC_INJECTED_SOFTWARE_START)
+  {
+    assert_param(IS_ADC_EXT_INJEC_TRIG_EDGE(sConfigInjected->ExternalTrigInjecConvEdge));
+  }
+
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  /* if ADC_Channel_10 ... ADC_Channel_18 is selected */
+  if (sConfigInjected->InjectedChannel > ADC_CHANNEL_9)
+  {
+    /* Clear the old sample time */
+    hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfigInjected->InjectedChannel);
+    
+    /* Set the new sample time */
+    hadc->Instance->SMPR1 |= ADC_SMPR1(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
+  }
+  else /* ADC_Channel include in ADC_Channel_[0..9] */
+  {
+    /* Clear the old sample time */
+    hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfigInjected->InjectedChannel);
+    
+    /* Set the new sample time */
+    hadc->Instance->SMPR2 |= ADC_SMPR2(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
+  }
+  
+  /*---------------------------- ADCx JSQR Configuration -----------------*/
+  hadc->Instance->JSQR &= ~(ADC_JSQR_JL);
+  hadc->Instance->JSQR |=  ADC_SQR1(sConfigInjected->InjectedNbrOfConversion);
+  
+  /* Rank configuration */
+  
+  /* Clear the old SQx bits for the selected rank */
+  hadc->Instance->JSQR &= ~ADC_JSQR(ADC_JSQR_JSQ1, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
+   
+  /* Set the SQx bits for the selected rank */
+  hadc->Instance->JSQR |= ADC_JSQR(sConfigInjected->InjectedChannel, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
+
+  /* Enable external trigger if trigger selection is different of software  */
+  /* start.                                                                 */
+  /* Note: This configuration keeps the hardware feature of parameter       */
+  /*       ExternalTrigConvEdge "trigger edge none" equivalent to           */
+  /*       software start.                                                  */ 
+  if(sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
+  {  
+    /* Select external trigger to start conversion */
+    hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
+    hadc->Instance->CR2 |=  sConfigInjected->ExternalTrigInjecConv;
+    
+    /* Select external trigger polarity */
+    hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);
+    hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConvEdge;
+  }
+  else
+  {
+    /* Reset the external trigger */
+    hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
+    hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);  
+  }
+  
+  if (sConfigInjected->AutoInjectedConv != DISABLE)
+  {
+    /* Enable the selected ADC automatic injected group conversion */
+    hadc->Instance->CR1 |= ADC_CR1_JAUTO;
+  }
+  else
+  {
+    /* Disable the selected ADC automatic injected group conversion */
+    hadc->Instance->CR1 &= ~(ADC_CR1_JAUTO);
+  }
+  
+  if (sConfigInjected->InjectedDiscontinuousConvMode != DISABLE)
+  {
+    /* Enable the selected ADC injected discontinuous mode */
+    hadc->Instance->CR1 |= ADC_CR1_JDISCEN;
+  }
+  else
+  {
+    /* Disable the selected ADC injected discontinuous mode */
+    hadc->Instance->CR1 &= ~(ADC_CR1_JDISCEN);
+  }
+  
+  switch(sConfigInjected->InjectedRank)
+  {
+    case 1:
+      /* Set injected channel 1 offset */
+      hadc->Instance->JOFR1 &= ~(ADC_JOFR1_JOFFSET1);
+      hadc->Instance->JOFR1 |= sConfigInjected->InjectedOffset;
+      break;
+    case 2:
+      /* Set injected channel 2 offset */
+      hadc->Instance->JOFR2 &= ~(ADC_JOFR2_JOFFSET2);
+      hadc->Instance->JOFR2 |= sConfigInjected->InjectedOffset;
+      break;
+    case 3:
+      /* Set injected channel 3 offset */
+      hadc->Instance->JOFR3 &= ~(ADC_JOFR3_JOFFSET3);
+      hadc->Instance->JOFR3 |= sConfigInjected->InjectedOffset;
+      break;
+    default:
+      /* Set injected channel 4 offset */
+      hadc->Instance->JOFR4 &= ~(ADC_JOFR4_JOFFSET4);
+      hadc->Instance->JOFR4 |= sConfigInjected->InjectedOffset;
+      break;
+  }
+  
+  /* if ADC1 Channel_18 is selected enable VBAT Channel */
+  if ((hadc->Instance == ADC1) && (sConfigInjected->InjectedChannel == ADC_CHANNEL_VBAT))
+  {
+    /* Enable the VBAT channel*/
+    ADC->CCR |= ADC_CCR_VBATE;
+  }
+  
+  /* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
+  if ((hadc->Instance == ADC1) && ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT)))
+  {
+    /* Enable the TSVREFE channel*/
+    ADC->CCR |= ADC_CCR_TSVREFE;
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the ADC multi-mode 
+  * @param  hadc      : pointer to a ADC_HandleTypeDef structure that contains
+  *                     the configuration information for the specified ADC.  
+  * @param  multimode : pointer to an ADC_MultiModeTypeDef structure that contains 
+  *                     the configuration information for  multimode.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_MODE(multimode->Mode));
+  assert_param(IS_ADC_DMA_ACCESS_MODE(multimode->DMAAccessMode));
+  assert_param(IS_ADC_SAMPLING_DELAY(multimode->TwoSamplingDelay));
+  
+  /* Process locked */
+  __HAL_LOCK(hadc);
+  
+  /* Set ADC mode */
+  ADC->CCR &= ~(ADC_CCR_MULTI);
+  ADC->CCR |= multimode->Mode;
+  
+  /* Set the ADC DMA access mode */
+  ADC->CCR &= ~(ADC_CCR_DMA);
+  ADC->CCR |= multimode->DMAAccessMode;
+  
+  /* Set delay between two sampling phases */
+  ADC->CCR &= ~(ADC_CCR_DELAY);
+  ADC->CCR |= multimode->TwoSamplingDelay;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hadc);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+  /**
+  * @brief  DMA transfer complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma)   
+{
+  /* Retrieve ADC handle corresponding to current DMA handle */
+  ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* Update state machine on conversion status if not in error state */
+  if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_ERROR_INTERNAL | HAL_ADC_STATE_ERROR_DMA))
+  {
+    /* Update ADC state machine */
+    SET_BIT(hadc->State, HAL_ADC_STATE_REG_EOC);
+    
+    /* Determine whether any further conversion upcoming on group regular   */
+    /* by external trigger, continuous mode or scan sequence on going.      */
+    /* Note: On STM32F7, there is no independent flag of end of sequence.   */
+    /*       The test of scan sequence on going is done either with scan    */
+    /*       sequence disabled or with end of conversion flag set to        */
+    /*       of end of sequence.                                            */
+    if(ADC_IS_SOFTWARE_START_REGULAR(hadc)                   &&
+       (hadc->Init.ContinuousConvMode == DISABLE)            &&
+       (HAL_IS_BIT_CLR(hadc->Instance->SQR1, ADC_SQR1_L) || 
+        HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_EOCS)  )   )
+    {
+      /* Disable ADC end of single conversion interrupt on group regular */
+      /* Note: Overrun interrupt was enabled with EOC interrupt in          */
+      /* HAL_ADC_Start_IT(), but is not disabled here because can be used   */
+      /* by overrun IRQ process below.                                      */
+      __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
+      
+      /* Set ADC state */
+      CLEAR_BIT(hadc->State, HAL_ADC_STATE_REG_BUSY);   
+      
+      if (HAL_IS_BIT_CLR(hadc->State, HAL_ADC_STATE_INJ_BUSY))
+      {
+        SET_BIT(hadc->State, HAL_ADC_STATE_READY);
+      }
+    }
+    
+    /* Conversion complete callback */
+    HAL_ADC_ConvCpltCallback(hadc);
+  }
+  else
+  {
+    /* Call DMA error callback */
+    hadc->DMA_Handle->XferErrorCallback(hdma);
+  }
+}
+
+/**
+  * @brief  DMA half transfer complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma)   
+{
+    ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+    /* Conversion complete callback */
+    HAL_ADC_ConvHalfCpltCallback(hadc); 
+}
+
+/**
+  * @brief  DMA error callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma)   
+{
+    ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+    hadc->State= HAL_ADC_STATE_ERROR_DMA;
+    /* Set ADC error code to DMA error */
+    hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
+    HAL_ADC_ErrorCallback(hadc); 
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_ADC_MODULE_ENABLED */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_adc_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,376 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_adc.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of ADC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_ADC_EX_H
+#define __STM32F7xx_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ADCEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Types ADC Exported Types
+  * @{
+  */
+   
+/** 
+  * @brief  ADC Configuration injected Channel structure definition
+  * @note   Parameters of this structure are shared within 2 scopes:
+  *          - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
+  *          - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
+  *            AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
+  * @note   The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
+  *         ADC state can be either:
+  *          - For all parameters: ADC disabled
+  *          - For all except parameters 'InjectedDiscontinuousConvMode' and 'AutoInjectedConv': ADC enabled without conversion on going on injected group.
+  *          - For parameters 'ExternalTrigInjecConv' and 'ExternalTrigInjecConvEdge': ADC enabled, even with conversion on going on injected group.
+  */
+typedef struct 
+{
+  uint32_t InjectedChannel;               /*!< Selection of ADC channel to configure
+                                               This parameter can be a value of @ref ADC_channels
+                                               Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+  uint32_t InjectedRank;                  /*!< Rank in the injected group sequencer
+                                               This parameter must be a value of @ref ADCEx_injected_channel_selection
+                                               Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+  uint32_t InjectedSamplingTime;          /*!< Sampling time value to be set for the selected channel.
+                                               Unit: ADC clock cycles
+                                               Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
+                                               This parameter can be a value of @ref ADC_sampling_times
+                                               Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+                                                        If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+                                               Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+                                                     sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+                                                     Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
+  uint32_t InjectedOffset;                /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
+                                               Offset value must be a positive number.
+                                               Depending of ADC resolution selected (12, 10, 8 or 6 bits),
+                                               this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+  uint32_t InjectedNbrOfConversion;       /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
+                                               To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+                                               This parameter must be a number between Min_Data = 1 and Max_Data = 4.
+                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 
+                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+                                               Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+                                               Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+                                               This parameter can be set to ENABLE or DISABLE.
+                                               Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
+                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 
+                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t AutoInjectedConv;              /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
+                                               This parameter can be set to ENABLE or DISABLE.      
+                                               Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
+                                               Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
+                                               Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
+                                                     To maintain JAUTO always enabled, DMA must be configured in circular mode.
+                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t ExternalTrigInjecConv;         /*!< Selects the external event used to trigger the conversion start of injected group.
+                                               If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
+                                               If set to external trigger source, triggering is on event rising edge.
+                                               This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected
+                                               Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+                                                     If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
+                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+  uint32_t ExternalTrigInjecConvEdge;     /*!< Selects the external trigger edge of injected group.
+                                               This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.
+                                               If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
+                                               Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to 
+                                                        configure a channel on injected group can impact the configuration of other channels previously set. */
+}ADC_InjectionConfTypeDef; 
+/**
+  * @}
+  */
+
+/** 
+  * @brief ADC Configuration multi-mode structure definition  
+  */ 
+typedef struct
+{
+  uint32_t Mode;              /*!< Configures the ADC to operate in independent or multi mode. 
+                                   This parameter can be a value of @ref ADCEx_Common_mode */
+  uint32_t DMAAccessMode;     /*!< Configures the Direct memory access mode for multi ADC mode.
+                                   This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */
+  uint32_t TwoSamplingDelay;  /*!< Configures the Delay between 2 sampling phases.
+                                   This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */
+}ADC_MultiModeTypeDef;
+
+/**
+  * @}
+  */ 
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Constants ADC Exported Constants
+  * @{
+  */
+
+/** @defgroup ADCEx_Common_mode ADC Common Mode
+  * @{
+  */
+#define ADC_MODE_INDEPENDENT                  ((uint32_t)0x00000000)      
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT    ((uint32_t)ADC_CCR_MULTI_0)
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG      ((uint32_t)ADC_CCR_MULTI_1)
+#define ADC_DUALMODE_INJECSIMULT              ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_REGSIMULT                ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_DUALMODE_INTERL                   ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_ALTERTRIG                ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT  ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig    ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INJECSIMULT            ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT              ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INTERL                 ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_ALTERTRIG              ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+/**
+  * @}
+  */ 
+
+/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode ADC Direct Memory Access Mode For Multi Mode
+  * @{
+  */ 
+#define ADC_DMAACCESSMODE_DISABLED  ((uint32_t)0x00000000)     /*!< DMA mode disabled */
+#define ADC_DMAACCESSMODE_1         ((uint32_t)ADC_CCR_DMA_0)  /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/
+#define ADC_DMAACCESSMODE_2         ((uint32_t)ADC_CCR_DMA_1)  /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/
+#define ADC_DMAACCESSMODE_3         ((uint32_t)ADC_CCR_DMA)    /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */
+/**
+  * @}
+  */ 
+
+/** @defgroup ADCEx_External_trigger_edge_Injected ADC External Trigger Edge Injected
+  * @{
+  */
+#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE           ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING         ((uint32_t)ADC_CR2_JEXTEN_0)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING        ((uint32_t)ADC_CR2_JEXTEN_1)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING  ((uint32_t)ADC_CR2_JEXTEN)
+/**
+  * @}
+  */ 
+
+/** @defgroup ADCEx_External_trigger_Source_Injected ADC External Trigger Source Injected
+  * @{
+  */
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO         ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4          ((uint32_t)ADC_CR2_JEXTSEL_0)
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO         ((uint32_t)ADC_CR2_JEXTSEL_1)
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1          ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4          ((uint32_t)ADC_CR2_JEXTSEL_2)
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO         ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4          ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2        ((uint32_t)ADC_CR2_JEXTSEL_3)
+#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO         ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO2        ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC3          ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO         ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2))
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC1          ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO         ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_INJECTED_SOFTWARE_START                ((uint32_t)ADC_CR2_JEXTSEL + 1)
+/**
+  * @}
+  */ 
+
+/** @defgroup ADCEx_injected_channel_selection ADC Injected Channel Selection
+  * @{
+  */ 
+#define ADC_INJECTED_RANK_1    ((uint32_t)0x00000001)
+#define ADC_INJECTED_RANK_2    ((uint32_t)0x00000002)
+#define ADC_INJECTED_RANK_3    ((uint32_t)0x00000003)
+#define ADC_INJECTED_RANK_4    ((uint32_t)0x00000004)
+/**
+  * @}
+  */ 
+
+/** @defgroup ADCEx_channels  ADC Specific Channels
+  * @{
+  */
+#define ADC_CHANNEL_TEMPSENSOR  ((uint32_t)ADC_CHANNEL_18 | 0x10000000)    
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */ 
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+  * @{
+  */
+	
+/** @addtogroup ADCEx_Exported_Functions_Group1
+  * @{
+  */
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc);
+void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Constants ADC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+	
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Macros ADC Private Macros
+  * @{
+  */
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) <= ADC_CHANNEL_18)  || \
+                                 ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR))
+                                     
+#define IS_ADC_MODE(__MODE__) (((__MODE__) == ADC_MODE_INDEPENDENT)                 || \
+                               ((__MODE__) == ADC_DUALMODE_REGSIMULT_INJECSIMULT)   || \
+                               ((__MODE__) == ADC_DUALMODE_REGSIMULT_ALTERTRIG)     || \
+                               ((__MODE__) == ADC_DUALMODE_INJECSIMULT)             || \
+                               ((__MODE__) == ADC_DUALMODE_REGSIMULT)               || \
+                               ((__MODE__) == ADC_DUALMODE_INTERL)                  || \
+                               ((__MODE__) == ADC_DUALMODE_ALTERTRIG)               || \
+                               ((__MODE__) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \
+                               ((__MODE__) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig)   || \
+                               ((__MODE__) == ADC_TRIPLEMODE_INJECSIMULT)           || \
+                               ((__MODE__) == ADC_TRIPLEMODE_REGSIMULT)             || \
+                               ((__MODE__) == ADC_TRIPLEMODE_INTERL)                || \
+                               ((__MODE__) == ADC_TRIPLEMODE_ALTERTRIG))
+#define IS_ADC_DMA_ACCESS_MODE(__MODE__) (((__MODE__) == ADC_DMAACCESSMODE_DISABLED) || \
+                                          ((__MODE__) == ADC_DMAACCESSMODE_1)        || \
+                                          ((__MODE__) == ADC_DMAACCESSMODE_2)        || \
+                                          ((__MODE__) == ADC_DMAACCESSMODE_3))
+#define IS_ADC_EXT_INJEC_TRIG_EDGE(__EDGE__) (((__EDGE__) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE)    || \
+                                              ((__EDGE__) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING)  || \
+                                              ((__EDGE__) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \
+                                              ((__EDGE__) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING))
+#define IS_ADC_EXT_INJEC_TRIG(__INJTRIG__) (((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO)  || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T1_CC4)   || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO)  || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T2_CC1)   || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T3_CC4)   || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO)  || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T8_CC4)   || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO)  || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO2) || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T3_CC3)   || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO)  || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T3_CC1)   || \
+                                            ((__INJTRIG__) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO)  || \
+											((__INJTRIG__) == ADC_INJECTED_SOFTWARE_START))
+#define IS_ADC_INJECTED_LENGTH(__LENGTH__) (((__LENGTH__) >= ((uint32_t)1)) && ((__LENGTH__) <= ((uint32_t)4)))
+#define IS_ADC_INJECTED_RANK(__RANK__) (((__RANK__) >= ((uint32_t)1)) && ((__RANK__) <= ((uint32_t)4)))
+
+/**
+  * @brief  Set the selected injected Channel rank.
+  * @param  _CHANNELNB_: Channel number.
+  * @param  _RANKNB_: Rank number. 
+  * @param  _JSQR_JL_: Sequence length.     
+  * @retval None
+  */
+#define   ADC_JSQR(_CHANNELNB_, _RANKNB_,_JSQR_JL_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * (uint8_t)(((_RANKNB_) + 3) - (_JSQR_JL_))))
+/**
+  * @}
+  */
+	
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Functions ADC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+	
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F7xx_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_can.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1441 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_can.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   CAN HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Controller Area Network (CAN) peripheral:
+  *           + Initialization and de-initialization functions 
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State and Error functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]            
+      (#) Enable the CAN controller interface clock using 
+          __HAL_RCC_CAN1_CLK_ENABLE() for CAN1 and __HAL_RCC_CAN2_CLK_ENABLE() for CAN2
+      -@- In case you are using CAN2 only, you have to enable the CAN1 clock.
+       
+      (#) CAN pins configuration
+        (++) Enable the clock for the CAN GPIOs using the following function:
+             __HAL_RCC_GPIOx_CLK_ENABLE()   
+        (++) Connect and configure the involved CAN pins to AF9 using the 
+              following function HAL_GPIO_Init() 
+              
+      (#) Initialize and configure the CAN using HAL_CAN_Init() function.   
+                 
+      (#) Transmit the desired CAN frame using HAL_CAN_Transmit() function.
+           
+      (#) Receive a CAN frame using HAL_CAN_Receive() function.
+
+     *** Polling mode IO operation ***
+     =================================
+     [..]    
+       (+) Start the CAN peripheral transmission and wait the end of this operation 
+           using HAL_CAN_Transmit(), at this stage user can specify the value of timeout
+           according to his end application
+       (+) Start the CAN peripheral reception and wait the end of this operation 
+           using HAL_CAN_Receive(), at this stage user can specify the value of timeout
+           according to his end application 
+       
+     *** Interrupt mode IO operation ***    
+     ===================================
+     [..]    
+       (+) Start the CAN peripheral transmission using HAL_CAN_Transmit_IT()
+       (+) Start the CAN peripheral reception using HAL_CAN_Receive_IT()         
+       (+) Use HAL_CAN_IRQHandler() called under the used CAN Interrupt subroutine
+       (+) At CAN end of transmission HAL_CAN_TxCpltCallback() function is executed and user can 
+            add his own code by customization of function pointer HAL_CAN_TxCpltCallback 
+       (+) In case of CAN Error, HAL_CAN_ErrorCallback() function is executed and user can 
+            add his own code by customization of function pointer HAL_CAN_ErrorCallback
+ 
+     *** CAN HAL driver macros list ***
+     ============================================= 
+     [..]
+       Below the list of most used macros in CAN HAL driver.
+       
+      (+) __HAL_CAN_ENABLE_IT: Enable the specified CAN interrupts
+      (+) __HAL_CAN_DISABLE_IT: Disable the specified CAN interrupts
+      (+) __HAL_CAN_GET_IT_SOURCE: Check if the specified CAN interrupt source is enabled or disabled
+      (+) __HAL_CAN_CLEAR_FLAG: Clear the CAN's pending flags
+      (+) __HAL_CAN_GET_FLAG: Get the selected CAN's flag status
+      
+     [..] 
+      (@) You can refer to the CAN HAL driver header file for more useful macros 
+                
+  @endverbatim
+           
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CAN CAN
+  * @brief CAN driver modules
+  * @{
+  */ 
+  
+#ifdef HAL_CAN_MODULE_ENABLED  
+
+  
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup CAN_Private_Constants
+  * @{
+  */
+#define CAN_TIMEOUT_VALUE  10
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup CAN_Private_Functions
+  * @{
+  */
+static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber);
+static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CAN_Exported_Functions CAN Exported Functions
+  * @{
+  */
+
+/** @defgroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the CAN. 
+      (+) De-initialize the CAN. 
+         
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Initializes the CAN peripheral according to the specified
+  *         parameters in the CAN_InitStruct.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan)
+{
+  uint32_t InitStatus = 3;
+  uint32_t tickstart = 0;
+  
+  /* Check CAN handle */
+  if(hcan == NULL)
+  {
+     return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
+  assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TTCM));
+  assert_param(IS_FUNCTIONAL_STATE(hcan->Init.ABOM));
+  assert_param(IS_FUNCTIONAL_STATE(hcan->Init.AWUM));
+  assert_param(IS_FUNCTIONAL_STATE(hcan->Init.NART));
+  assert_param(IS_FUNCTIONAL_STATE(hcan->Init.RFLM));
+  assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TXFP));
+  assert_param(IS_CAN_MODE(hcan->Init.Mode));
+  assert_param(IS_CAN_SJW(hcan->Init.SJW));
+  assert_param(IS_CAN_BS1(hcan->Init.BS1));
+  assert_param(IS_CAN_BS2(hcan->Init.BS2));
+  assert_param(IS_CAN_PRESCALER(hcan->Init.Prescaler));
+  
+
+  if(hcan->State == HAL_CAN_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hcan->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_CAN_MspInit(hcan);
+  }
+  
+  /* Initialize the CAN state*/
+  hcan->State = HAL_CAN_STATE_BUSY;
+  
+  /* Exit from sleep mode */
+  hcan->Instance->MCR &= (~(uint32_t)CAN_MCR_SLEEP);
+
+  /* Request initialisation */
+  hcan->Instance->MCR |= CAN_MCR_INRQ ;
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait the acknowledge */
+  while((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
+  {
+    if((HAL_GetTick() - tickstart ) > CAN_TIMEOUT_VALUE)
+    {
+      hcan->State= HAL_CAN_STATE_TIMEOUT;
+      /* Process unlocked */
+      __HAL_UNLOCK(hcan);
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Check acknowledge */
+  if ((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
+  {
+    InitStatus = CAN_INITSTATUS_FAILED;
+  }
+  else 
+  {
+    /* Set the time triggered communication mode */
+    if (hcan->Init.TTCM == ENABLE)
+    {
+      hcan->Instance->MCR |= CAN_MCR_TTCM;
+    }
+    else
+    {
+      hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TTCM;
+    }
+
+    /* Set the automatic bus-off management */
+    if (hcan->Init.ABOM == ENABLE)
+    {
+      hcan->Instance->MCR |= CAN_MCR_ABOM;
+    }
+    else
+    {
+      hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_ABOM;
+    }
+
+    /* Set the automatic wake-up mode */
+    if (hcan->Init.AWUM == ENABLE)
+    {
+      hcan->Instance->MCR |= CAN_MCR_AWUM;
+    }
+    else
+    {
+      hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_AWUM;
+    }
+
+    /* Set the no automatic retransmission */
+    if (hcan->Init.NART == ENABLE)
+    {
+      hcan->Instance->MCR |= CAN_MCR_NART;
+    }
+    else
+    {
+      hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_NART;
+    }
+
+    /* Set the receive FIFO locked mode */
+    if (hcan->Init.RFLM == ENABLE)
+    {
+      hcan->Instance->MCR |= CAN_MCR_RFLM;
+    }
+    else
+    {
+      hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_RFLM;
+    }
+
+    /* Set the transmit FIFO priority */
+    if (hcan->Init.TXFP == ENABLE)
+    {
+      hcan->Instance->MCR |= CAN_MCR_TXFP;
+    }
+    else
+    {
+      hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TXFP;
+    }
+
+    /* Set the bit timing register */
+    hcan->Instance->BTR = (uint32_t)((uint32_t)hcan->Init.Mode) | \
+                ((uint32_t)hcan->Init.SJW) | \
+                ((uint32_t)hcan->Init.BS1) | \
+                ((uint32_t)hcan->Init.BS2) | \
+               ((uint32_t)hcan->Init.Prescaler - 1);
+
+    /* Request leave initialisation */
+    hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+   /* Wait the acknowledge */
+   while((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
+   {
+    if((HAL_GetTick() - tickstart ) > CAN_TIMEOUT_VALUE)
+     {
+       hcan->State= HAL_CAN_STATE_TIMEOUT;
+       /* Process unlocked */
+       __HAL_UNLOCK(hcan);
+       return HAL_TIMEOUT;
+     }
+   }
+
+    /* Check acknowledged */
+    if ((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
+    {
+      InitStatus = CAN_INITSTATUS_FAILED;
+    }
+    else
+    {
+      InitStatus = CAN_INITSTATUS_SUCCESS;
+    }
+  }
+ 
+  if(InitStatus == CAN_INITSTATUS_SUCCESS)
+  {
+    /* Set CAN error code to none */
+    hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+    
+    /* Initialize the CAN state */
+    hcan->State = HAL_CAN_STATE_READY;
+  
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    /* Initialize the CAN state */
+    hcan->State = HAL_CAN_STATE_ERROR;
+    
+    /* Return function status */
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Configures the CAN reception filter according to the specified
+  *         parameters in the CAN_FilterInitStruct.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @param  sFilterConfig: pointer to a CAN_FilterConfTypeDef structure that
+  *         contains the filter configuration information.
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig)
+{
+  uint32_t filternbrbitpos = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_CAN_FILTER_NUMBER(sFilterConfig->FilterNumber));
+  assert_param(IS_CAN_FILTER_MODE(sFilterConfig->FilterMode));
+  assert_param(IS_CAN_FILTER_SCALE(sFilterConfig->FilterScale));
+  assert_param(IS_CAN_FILTER_FIFO(sFilterConfig->FilterFIFOAssignment));
+  assert_param(IS_FUNCTIONAL_STATE(sFilterConfig->FilterActivation));
+  assert_param(IS_CAN_BANKNUMBER(sFilterConfig->BankNumber));
+  
+  filternbrbitpos = ((uint32_t)1) << sFilterConfig->FilterNumber;
+
+  /* Initialisation mode for the filter */
+  CAN1->FMR |= (uint32_t)CAN_FMR_FINIT;
+  
+  /* Select the start slave bank */
+  CAN1->FMR &= ~((uint32_t)CAN_FMR_CAN2SB);
+  CAN1->FMR |= (uint32_t)(sFilterConfig->BankNumber << 8);
+     
+  /* Filter Deactivation */
+  CAN1->FA1R &= ~(uint32_t)filternbrbitpos;
+
+  /* Filter Scale */
+  if (sFilterConfig->FilterScale == CAN_FILTERSCALE_16BIT)
+  {
+    /* 16-bit scale for the filter */
+    CAN1->FS1R &= ~(uint32_t)filternbrbitpos;
+
+    /* First 16-bit identifier and First 16-bit mask */
+    /* Or First 16-bit identifier and Second 16-bit identifier */
+    CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR1 = 
+       ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdLow) << 16) |
+        (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdLow);
+
+    /* Second 16-bit identifier and Second 16-bit mask */
+    /* Or Third 16-bit identifier and Fourth 16-bit identifier */
+    CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR2 = 
+       ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16) |
+        (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdHigh);
+  }
+
+  if (sFilterConfig->FilterScale == CAN_FILTERSCALE_32BIT)
+  {
+    /* 32-bit scale for the filter */
+    CAN1->FS1R |= filternbrbitpos;
+    /* 32-bit identifier or First 32-bit identifier */
+    CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR1 = 
+       ((0x0000FFFF & (uint32_t)sFilterConfig->FilterIdHigh) << 16) |
+        (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdLow);
+    /* 32-bit mask or Second 32-bit identifier */
+    CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR2 = 
+       ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16) |
+        (0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdLow);
+  }
+
+  /* Filter Mode */
+  if (sFilterConfig->FilterMode == CAN_FILTERMODE_IDMASK)
+  {
+    /*Id/Mask mode for the filter*/
+    CAN1->FM1R &= ~(uint32_t)filternbrbitpos;
+  }
+  else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */
+  {
+    /*Identifier list mode for the filter*/
+    CAN1->FM1R |= (uint32_t)filternbrbitpos;
+  }
+
+  /* Filter FIFO assignment */
+  if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO0)
+  {
+    /* FIFO 0 assignation for the filter */
+    CAN1->FFA1R &= ~(uint32_t)filternbrbitpos;
+  }
+
+  if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO1)
+  {
+    /* FIFO 1 assignation for the filter */
+    CAN1->FFA1R |= (uint32_t)filternbrbitpos;
+  }
+  
+  /* Filter activation */
+  if (sFilterConfig->FilterActivation == ENABLE)
+  {
+    CAN1->FA1R |= filternbrbitpos;
+  }
+
+  /* Leave the initialisation mode for the filter */
+  CAN1->FMR &= ~((uint32_t)CAN_FMR_FINIT);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deinitializes the CANx peripheral registers to their default reset values. 
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan)
+{
+  /* Check CAN handle */
+  if(hcan == NULL)
+  {
+     return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
+  
+  /* Change CAN state */
+  hcan->State = HAL_CAN_STATE_BUSY;
+  
+  /* DeInit the low level hardware */
+  HAL_CAN_MspDeInit(hcan);
+  
+  /* Change CAN state */
+  hcan->State = HAL_CAN_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hcan);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CAN MSP.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.  
+  * @retval None
+  */
+__weak void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcan);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CAN_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  DeInitializes the CAN MSP.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.  
+  * @retval None
+  */
+__weak void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcan);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CAN_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Exported_Functions_Group2 IO operation functions
+ *  @brief    IO operation functions 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### IO operation functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Transmit a CAN frame message.
+      (+) Receive a CAN frame message.
+      (+) Enter CAN peripheral in sleep mode. 
+      (+) Wake up the CAN peripheral from sleep mode.
+               
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initiates and transmits a CAN frame message.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.  
+  * @param  Timeout: Specify Timeout value   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout)
+{
+  uint32_t  transmitmailbox = 5;
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
+  assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
+  assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
+  
+  /* Process locked */
+  __HAL_LOCK(hcan);
+  
+  if(hcan->State == HAL_CAN_STATE_BUSY_RX) 
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+  }
+  else
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_TX;
+  }
+  
+  /* Select one empty transmit mailbox */
+  if ((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
+  {
+    transmitmailbox = 0;
+  }
+  else if ((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
+  {
+    transmitmailbox = 1;
+  }
+  else if ((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)
+  {
+    transmitmailbox = 2;
+  }
+  else
+  {
+    transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
+  }
+
+  if (transmitmailbox != CAN_TXSTATUS_NOMAILBOX)
+  {
+    /* Set up the Id */
+    hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
+    if (hcan->pTxMsg->IDE == CAN_ID_STD)
+    {
+      assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));  
+      hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21) | \
+                                                  hcan->pTxMsg->RTR);
+    }
+    else
+    {
+      assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
+      hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3) | \
+                                                  hcan->pTxMsg->IDE | \
+                                                  hcan->pTxMsg->RTR);
+    }
+    
+    /* Set up the DLC */
+    hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
+    hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0;
+    hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
+
+    /* Set up the data field */
+    hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3] << 24) | 
+                                             ((uint32_t)hcan->pTxMsg->Data[2] << 16) |
+                                             ((uint32_t)hcan->pTxMsg->Data[1] << 8) | 
+                                             ((uint32_t)hcan->pTxMsg->Data[0]));
+    hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7] << 24) | 
+                                             ((uint32_t)hcan->pTxMsg->Data[6] << 16) |
+                                             ((uint32_t)hcan->pTxMsg->Data[5] << 8) |
+                                             ((uint32_t)hcan->pTxMsg->Data[4]));
+    /* Request transmission */
+    hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
+  
+  /* Get tick */ 
+  tickstart = HAL_GetTick();
+  
+    /* Check End of transmission flag */
+    while(!(__HAL_CAN_TRANSMIT_STATUS(hcan, transmitmailbox)))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+       if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+       {
+         hcan->State = HAL_CAN_STATE_TIMEOUT;
+         /* Process unlocked */
+         __HAL_UNLOCK(hcan);
+         return HAL_TIMEOUT;
+        }
+      }
+    }
+    if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX) 
+    {
+      /* Change CAN state */
+      hcan->State = HAL_CAN_STATE_BUSY_RX;
+      
+      /* Process unlocked */
+      __HAL_UNLOCK(hcan);
+    }
+    else
+    {
+      /* Change CAN state */
+      hcan->State = HAL_CAN_STATE_READY;
+      
+      /* Process unlocked */
+      __HAL_UNLOCK(hcan);
+    }
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_ERROR;
+
+    /* Process unlocked */
+    __HAL_UNLOCK(hcan);
+
+    /* Return function status */
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  Initiates and transmits a CAN frame message.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
+{
+  uint32_t  transmitmailbox = 5;
+  uint32_t tmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
+  assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
+  assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
+  
+  tmp = hcan->State;
+  if((tmp == HAL_CAN_STATE_READY) || (tmp == HAL_CAN_STATE_BUSY_RX))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcan);
+    
+    /* Select one empty transmit mailbox */
+    if((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
+    {
+      transmitmailbox = 0;
+    }
+    else if((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
+    {
+      transmitmailbox = 1;
+    }
+    else if((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)
+    {
+      transmitmailbox = 2;
+    }
+    else
+    {
+      transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
+    }
+
+    if(transmitmailbox != CAN_TXSTATUS_NOMAILBOX)
+    {
+      /* Set up the Id */
+      hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
+      if(hcan->pTxMsg->IDE == CAN_ID_STD)
+      {
+        assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));  
+        hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21) | \
+                                                  hcan->pTxMsg->RTR);
+      }
+      else
+      {
+        assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
+        hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3) | \
+                                                  hcan->pTxMsg->IDE | \
+                                                  hcan->pTxMsg->RTR);
+      }
+    
+      /* Set up the DLC */
+      hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
+      hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0;
+      hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
+
+      /* Set up the data field */
+      hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3] << 24) | 
+                                             ((uint32_t)hcan->pTxMsg->Data[2] << 16) |
+                                             ((uint32_t)hcan->pTxMsg->Data[1] << 8) | 
+                                             ((uint32_t)hcan->pTxMsg->Data[0]));
+      hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7] << 24) | 
+                                             ((uint32_t)hcan->pTxMsg->Data[6] << 16) |
+                                             ((uint32_t)hcan->pTxMsg->Data[5] << 8) |
+                                             ((uint32_t)hcan->pTxMsg->Data[4]));
+    
+      if(hcan->State == HAL_CAN_STATE_BUSY_RX) 
+      {
+        /* Change CAN state */
+        hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+      }
+      else
+      {
+        /* Change CAN state */
+        hcan->State = HAL_CAN_STATE_BUSY_TX;
+      }
+      
+      /* Set CAN error code to none */
+      hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcan);
+      
+      /* Enable Error warning Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG);
+      
+      /* Enable Error passive Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EPV);
+      
+      /* Enable Bus-off Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_BOF);
+      
+      /* Enable Last error code Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_LEC);
+      
+      /* Enable Error Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_ERR);
+      
+      /* Enable Transmit mailbox empty Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_TME);
+      
+      /* Request transmission */
+      hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Receives a correct CAN frame.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.  
+  * @param  FIFONumber: FIFO Number value
+  * @param  Timeout: Specify Timeout value 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+   
+  /* Check the parameters */
+  assert_param(IS_CAN_FIFO(FIFONumber));
+  
+  /* Process locked */
+  __HAL_LOCK(hcan);
+  
+  if(hcan->State == HAL_CAN_STATE_BUSY_TX) 
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+  }
+  else
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_RX;
+  }
+    
+  /* Get tick */ 
+  tickstart = HAL_GetTick();
+  
+  /* Check pending message */
+  while(__HAL_CAN_MSG_PENDING(hcan, FIFONumber) == 0)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hcan->State = HAL_CAN_STATE_TIMEOUT;
+        /* Process unlocked */
+        __HAL_UNLOCK(hcan);
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Get the Id */
+  hcan->pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+  if (hcan->pRxMsg->IDE == CAN_ID_STD)
+  {
+    hcan->pRxMsg->StdId = (uint32_t)0x000007FF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21);
+  }
+  else
+  {
+    hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3);
+  }
+  
+  hcan->pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+  /* Get the DLC */
+  hcan->pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
+  /* Get the FMI */
+  hcan->pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8);
+  /* Get the data field */
+  hcan->pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
+  hcan->pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8);
+  hcan->pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16);
+  hcan->pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24);
+  hcan->pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
+  hcan->pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8);
+  hcan->pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16);
+  hcan->pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24);
+  
+  /* Release the FIFO */
+  if(FIFONumber == CAN_FIFO0)
+  {
+    /* Release FIFO0 */
+    __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
+  }
+  else /* FIFONumber == CAN_FIFO1 */
+  {
+    /* Release FIFO1 */
+    __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
+  }
+  
+  if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX) 
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_TX;
+    
+    /* Process unlocked */
+    __HAL_UNLOCK(hcan);
+  }
+  else
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_READY;
+    
+    /* Process unlocked */
+    __HAL_UNLOCK(hcan);
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Receives a correct CAN frame.
+  * @param  hcan:       Pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.  
+  * @param  FIFONumber: Specify the FIFO number    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
+{
+  uint32_t tmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_CAN_FIFO(FIFONumber));
+  
+  tmp = hcan->State;
+  if((tmp == HAL_CAN_STATE_READY) || (tmp == HAL_CAN_STATE_BUSY_TX))
+  {
+    /* Process locked */
+    __HAL_LOCK(hcan);
+  
+    if(hcan->State == HAL_CAN_STATE_BUSY_TX) 
+    {
+      /* Change CAN state */
+      hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      /* Change CAN state */
+      hcan->State = HAL_CAN_STATE_BUSY_RX;
+    }
+    
+    /* Set CAN error code to none */
+    hcan->ErrorCode = HAL_CAN_ERROR_NONE;
+    
+    /* Enable Error warning Interrupt */
+    __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG);
+      
+    /* Enable Error passive Interrupt */
+    __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EPV);
+      
+    /* Enable Bus-off Interrupt */
+    __HAL_CAN_ENABLE_IT(hcan, CAN_IT_BOF);
+      
+    /* Enable Last error code Interrupt */
+    __HAL_CAN_ENABLE_IT(hcan, CAN_IT_LEC);
+      
+    /* Enable Error Interrupt */
+    __HAL_CAN_ENABLE_IT(hcan, CAN_IT_ERR);
+
+    /* Process unlocked */
+    __HAL_UNLOCK(hcan);
+
+    if(FIFONumber == CAN_FIFO0)
+    {
+      /* Enable FIFO 0 message pending Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP0);
+    }
+    else
+    {
+      /* Enable FIFO 1 message pending Interrupt */
+      __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP1);
+    }
+    
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enters the Sleep (low power) mode.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef* hcan)
+{
+  uint32_t tickstart = 0;
+   
+  /* Process locked */
+  __HAL_LOCK(hcan);
+  
+  /* Change CAN state */
+  hcan->State = HAL_CAN_STATE_BUSY; 
+    
+  /* Request Sleep mode */
+   hcan->Instance->MCR = (((hcan->Instance->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
+   
+  /* Sleep mode status */
+  if ((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK)
+  {
+    /* Process unlocked */
+    __HAL_UNLOCK(hcan);
+
+    /* Return function status */
+    return HAL_ERROR;
+  }
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  /* Wait the acknowledge */
+  while((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK)
+  {
+    if((HAL_GetTick()  - tickstart) > CAN_TIMEOUT_VALUE)
+    {
+      hcan->State = HAL_CAN_STATE_TIMEOUT;
+      /* Process unlocked */
+      __HAL_UNLOCK(hcan);
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  /* Change CAN state */
+  hcan->State = HAL_CAN_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hcan);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Wakes up the CAN peripheral from sleep mode, after that the CAN peripheral
+  *         is in the normal mode.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval HAL status.
+  */
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef* hcan)
+{
+  uint32_t tickstart = 0;
+    
+  /* Process locked */
+  __HAL_LOCK(hcan);
+  
+  /* Change CAN state */
+  hcan->State = HAL_CAN_STATE_BUSY;  
+ 
+  /* Wake up request */
+  hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_SLEEP;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Sleep mode status */
+  while((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
+  {
+    if((HAL_GetTick()  - tickstart) > CAN_TIMEOUT_VALUE)
+    {
+      hcan->State= HAL_CAN_STATE_TIMEOUT;
+      /* Process unlocked */
+      __HAL_UNLOCK(hcan);
+      return HAL_TIMEOUT;
+    }
+  }
+  if((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
+  {
+    /* Process unlocked */
+    __HAL_UNLOCK(hcan);
+
+    /* Return function status */
+    return HAL_ERROR;
+  }
+  
+  /* Change CAN state */
+  hcan->State = HAL_CAN_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hcan);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles CAN interrupt request  
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval None
+  */
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan)
+{
+  uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0;
+  
+  /* Check End of transmission flag */
+  if(__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_TME))
+  {
+    tmp1 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_0);
+    tmp2 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_1);
+    tmp3 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_2);
+    if(tmp1 || tmp2 || tmp3)  
+    {
+      /* Call transmit function */
+      CAN_Transmit_IT(hcan);
+    }
+  }
+  
+  tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO0);
+  tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP0);
+  /* Check End of reception flag for FIFO0 */
+  if((tmp1 != 0) && tmp2)
+  {
+    /* Call receive function */
+    CAN_Receive_IT(hcan, CAN_FIFO0);
+  }
+  
+  tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO1);
+  tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP1);
+  /* Check End of reception flag for FIFO1 */
+  if((tmp1 != 0) && tmp2)
+  {
+    /* Call receive function */
+    CAN_Receive_IT(hcan, CAN_FIFO1);
+  }
+  
+  tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EWG);
+  tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EWG);
+  tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
+  /* Check Error Warning Flag */
+  if(tmp1 && tmp2 && tmp3)
+  {
+    /* Set CAN error code to EWG error */
+    hcan->ErrorCode |= HAL_CAN_ERROR_EWG;
+  }
+  
+  tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EPV);
+  tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EPV);
+  tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR); 
+  /* Check Error Passive Flag */
+  if(tmp1 && tmp2 && tmp3)
+  {
+    /* Set CAN error code to EPV error */
+    hcan->ErrorCode |= HAL_CAN_ERROR_EPV;
+  }
+  
+  tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_BOF);
+  tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_BOF);
+  tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);  
+  /* Check Bus-Off Flag */
+  if(tmp1 && tmp2 && tmp3)
+  {
+    /* Set CAN error code to BOF error */
+    hcan->ErrorCode |= HAL_CAN_ERROR_BOF;
+  }
+  
+  tmp1 = HAL_IS_BIT_CLR(hcan->Instance->ESR, CAN_ESR_LEC);
+  tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_LEC);
+  tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
+  /* Check Last error code Flag */
+  if((!tmp1) && tmp2 && tmp3)
+  {
+    tmp1 = (hcan->Instance->ESR) & CAN_ESR_LEC;
+    switch(tmp1)
+    {
+      case(CAN_ESR_LEC_0):
+          /* Set CAN error code to STF error */
+          hcan->ErrorCode |= HAL_CAN_ERROR_STF;
+          break;
+      case(CAN_ESR_LEC_1):
+          /* Set CAN error code to FOR error */
+          hcan->ErrorCode |= HAL_CAN_ERROR_FOR;
+          break;
+      case(CAN_ESR_LEC_1 | CAN_ESR_LEC_0):
+          /* Set CAN error code to ACK error */
+          hcan->ErrorCode |= HAL_CAN_ERROR_ACK;
+          break;
+      case(CAN_ESR_LEC_2):
+          /* Set CAN error code to BR error */
+          hcan->ErrorCode |= HAL_CAN_ERROR_BR;
+          break;
+      case(CAN_ESR_LEC_2 | CAN_ESR_LEC_0):
+          /* Set CAN error code to BD error */
+          hcan->ErrorCode |= HAL_CAN_ERROR_BD;
+          break;
+      case(CAN_ESR_LEC_2 | CAN_ESR_LEC_1):
+          /* Set CAN error code to CRC error */
+          hcan->ErrorCode |= HAL_CAN_ERROR_CRC;
+          break;
+      default:
+          break;
+    }
+
+    /* Clear Last error code Flag */ 
+    hcan->Instance->ESR &= ~(CAN_ESR_LEC);
+  }
+
+  /* Call the Error call Back in case of Errors */
+  if(hcan->ErrorCode != HAL_CAN_ERROR_NONE)
+  {
+    /* Clear ERRI Flag */ 
+    hcan->Instance->MSR = CAN_MSR_ERRI; 
+    /* Set the CAN state ready to be able to start again the process */
+    hcan->State = HAL_CAN_STATE_READY;
+    /* Call Error callback function */
+    HAL_CAN_ErrorCallback(hcan);
+  }  
+}
+
+/**
+  * @brief  Transmission  complete callback in non blocking mode 
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval None
+  */
+__weak void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcan);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CAN_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Transmission  complete callback in non blocking mode 
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval None
+  */
+__weak void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcan);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CAN_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Error CAN callback.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval None
+  */
+__weak void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcan);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CAN_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Exported_Functions_Group3 Peripheral State and Error functions
+ *  @brief   CAN Peripheral State functions 
+ *
+@verbatim   
+  ==============================================================================
+            ##### Peripheral State and Error functions #####
+  ==============================================================================
+    [..]
+    This subsection provides functions allowing to :
+      (+) Check the CAN state.
+      (+) Check CAN Errors detected during interrupt process
+         
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  return the CAN state
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval HAL state
+  */
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan)
+{
+  /* Return CAN state */
+  return hcan->State;
+}
+
+/**
+  * @brief  Return the CAN error code
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval CAN Error Code
+  */
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan)
+{
+  return hcan->ErrorCode;
+}
+
+/**
+  * @}
+  */
+/**
+  * @brief  Initiates and transmits a CAN frame message.
+  * @param  hcan: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.  
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
+{
+  /* Disable Transmit mailbox empty Interrupt */
+  __HAL_CAN_DISABLE_IT(hcan, CAN_IT_TME);
+  
+  if(hcan->State == HAL_CAN_STATE_BUSY_TX)
+  {   
+    /* Disable Error warning Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG);
+    
+    /* Disable Error passive Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EPV);
+    
+    /* Disable Bus-off Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_BOF);
+    
+    /* Disable Last error code Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_LEC);
+    
+    /* Disable Error Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_ERR);
+  }
+  
+  if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX) 
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_RX;
+  }
+  else
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_READY;
+  }
+  
+  /* Transmission complete callback */ 
+  HAL_CAN_TxCpltCallback(hcan);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Receives a correct CAN frame.
+  * @param  hcan:       Pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.  
+  * @param  FIFONumber: Specify the FIFO number    
+  * @retval HAL status
+  * @retval None
+  */
+static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
+{
+  /* Get the Id */
+  hcan->pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+  if (hcan->pRxMsg->IDE == CAN_ID_STD)
+  {
+    hcan->pRxMsg->StdId = (uint32_t)0x000007FF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21);
+  }
+  else
+  {
+    hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3);
+  }
+  
+  hcan->pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
+  /* Get the DLC */
+  hcan->pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
+  /* Get the FMI */
+  hcan->pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8);
+  /* Get the data field */
+  hcan->pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
+  hcan->pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8);
+  hcan->pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16);
+  hcan->pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24);
+  hcan->pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
+  hcan->pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8);
+  hcan->pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16);
+  hcan->pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24);
+  /* Release the FIFO */
+  /* Release FIFO0 */
+  if (FIFONumber == CAN_FIFO0)
+  {
+    __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
+    
+    /* Disable FIFO 0 message pending Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP0);
+  }
+  /* Release FIFO1 */
+  else /* FIFONumber == CAN_FIFO1 */
+  {
+    __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
+    
+    /* Disable FIFO 1 message pending Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP1);
+  }
+  
+  if(hcan->State == HAL_CAN_STATE_BUSY_RX)
+  {   
+    /* Disable Error warning Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG);
+    
+    /* Disable Error passive Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EPV);
+    
+    /* Disable Bus-off Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_BOF);
+    
+    /* Disable Last error code Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_LEC);
+    
+    /* Disable Error Interrupt */
+    __HAL_CAN_DISABLE_IT(hcan, CAN_IT_ERR);
+  }
+  
+  if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX) 
+  {
+    /* Disable CAN state */
+    hcan->State = HAL_CAN_STATE_BUSY_TX;
+  }
+  else
+  {
+    /* Change CAN state */
+    hcan->State = HAL_CAN_STATE_READY;
+  }
+
+  /* Receive complete callback */ 
+  HAL_CAN_RxCpltCallback(hcan);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+#endif /* HAL_CAN_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_can.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,768 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_can.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of CAN HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CAN_H
+#define __STM32F7xx_HAL_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CAN
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+  * @{
+  */
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_CAN_STATE_RESET             = 0x00,  /*!< CAN not yet initialized or disabled */
+  HAL_CAN_STATE_READY             = 0x01,  /*!< CAN initialized and ready for use   */
+  HAL_CAN_STATE_BUSY              = 0x02,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_TX           = 0x12,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_RX           = 0x22,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_BUSY_TX_RX        = 0x32,  /*!< CAN process is ongoing              */
+  HAL_CAN_STATE_TIMEOUT           = 0x03,  /*!< Timeout state                       */
+  HAL_CAN_STATE_ERROR             = 0x04   /*!< CAN error state                     */
+
+}HAL_CAN_StateTypeDef;
+
+/**
+  * @brief  CAN init structure definition
+  */
+typedef struct
+{
+  uint32_t Prescaler;  /*!< Specifies the length of a time quantum.
+                            This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
+
+  uint32_t Mode;       /*!< Specifies the CAN operating mode.
+                            This parameter can be a value of @ref CAN_operating_mode */
+
+  uint32_t SJW;        /*!< Specifies the maximum number of time quanta
+                            the CAN hardware is allowed to lengthen or
+                            shorten a bit to perform resynchronization.
+                            This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+  uint32_t BS1;        /*!< Specifies the number of time quanta in Bit Segment 1.
+                            This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+  uint32_t BS2;        /*!< Specifies the number of time quanta in Bit Segment 2.
+                            This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+  uint32_t TTCM;       /*!< Enable or disable the time triggered communication mode.
+                            This parameter can be set to ENABLE or DISABLE. */
+
+  uint32_t ABOM;       /*!< Enable or disable the automatic bus-off management.
+                            This parameter can be set to ENABLE or DISABLE */
+
+  uint32_t AWUM;       /*!< Enable or disable the automatic wake-up mode.
+                            This parameter can be set to ENABLE or DISABLE */
+
+  uint32_t NART;       /*!< Enable or disable the non-automatic retransmission mode.
+                            This parameter can be set to ENABLE or DISABLE */
+
+  uint32_t RFLM;       /*!< Enable or disable the receive FIFO Locked mode.
+                            This parameter can be set to ENABLE or DISABLE */
+
+  uint32_t TXFP;       /*!< Enable or disable the transmit FIFO priority.
+                            This parameter can be set to ENABLE or DISABLE */
+}CAN_InitTypeDef;
+
+/**
+  * @brief  CAN filter configuration structure definition
+  */
+typedef struct
+{
+  uint32_t FilterIdHigh;          /*!< Specifies the filter identification number (MSBs for a 32-bit
+                                       configuration, first one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t FilterIdLow;           /*!< Specifies the filter identification number (LSBs for a 32-bit
+                                       configuration, second one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t FilterMaskIdHigh;      /*!< Specifies the filter mask number or identification number,
+                                       according to the mode (MSBs for a 32-bit configuration,
+                                       first one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t FilterMaskIdLow;       /*!< Specifies the filter mask number or identification number,
+                                       according to the mode (LSBs for a 32-bit configuration,
+                                       second one for a 16-bit configuration).
+                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t FilterFIFOAssignment;  /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+                                       This parameter can be a value of @ref CAN_filter_FIFO */
+
+  uint32_t FilterNumber;          /*!< Specifies the filter which will be initialized.
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 27 */
+
+  uint32_t FilterMode;            /*!< Specifies the filter mode to be initialized.
+                                       This parameter can be a value of @ref CAN_filter_mode */
+
+  uint32_t FilterScale;           /*!< Specifies the filter scale.
+                                       This parameter can be a value of @ref CAN_filter_scale */
+
+  uint32_t FilterActivation;      /*!< Enable or disable the filter.
+                                       This parameter can be set to ENABLE or DISABLE. */
+
+  uint32_t BankNumber;            /*!< Select the start slave bank filter.
+                                       This parameter must be a number between Min_Data = 0 and Max_Data = 28 */
+
+}CAN_FilterConfTypeDef;
+
+/**
+  * @brief  CAN Tx message structure definition
+  */
+typedef struct
+{
+  uint32_t StdId;    /*!< Specifies the standard identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+  uint32_t ExtId;    /*!< Specifies the extended identifier.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
+  uint32_t IDE;      /*!< Specifies the type of identifier for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_Identifier_Type */
+
+  uint32_t RTR;      /*!< Specifies the type of frame for the message that will be transmitted.
+                          This parameter can be a value of @ref CAN_remote_transmission_request */
+
+  uint32_t DLC;      /*!< Specifies the length of the frame that will be transmitted.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+  uint8_t Data[8];  /*!< Contains the data to be transmitted.
+                          This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+}CanTxMsgTypeDef;
+
+/**
+  * @brief  CAN Rx message structure definition
+  */
+typedef struct
+{
+  uint32_t StdId;       /*!< Specifies the standard identifier.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+  uint32_t ExtId;       /*!< Specifies the extended identifier.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
+  uint32_t IDE;         /*!< Specifies the type of identifier for the message that will be received.
+                             This parameter can be a value of @ref CAN_Identifier_Type */
+
+  uint32_t RTR;         /*!< Specifies the type of frame for the received message.
+                             This parameter can be a value of @ref CAN_remote_transmission_request */
+
+  uint32_t DLC;         /*!< Specifies the length of the frame that will be received.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+  uint8_t Data[8];      /*!< Contains the data to be received.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+  uint32_t FMI;         /*!< Specifies the index of the filter the message stored in the mailbox passes through.
+                             This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+  uint32_t FIFONumber;  /*!< Specifies the receive FIFO number.
+                             This parameter can be CAN_FIFO0 or CAN_FIFO1 */
+
+}CanRxMsgTypeDef;
+
+/**
+  * @brief  CAN handle Structure definition
+  */
+typedef struct
+{
+  CAN_TypeDef                 *Instance;  /*!< Register base address          */
+
+  CAN_InitTypeDef             Init;       /*!< CAN required parameters        */
+
+  CanTxMsgTypeDef*            pTxMsg;     /*!< Pointer to transmit structure  */
+
+  CanRxMsgTypeDef*            pRxMsg;     /*!< Pointer to reception structure */
+
+  __IO HAL_CAN_StateTypeDef   State;      /*!< CAN communication state        */
+
+  HAL_LockTypeDef             Lock;       /*!< CAN locking object             */
+
+  __IO uint32_t               ErrorCode;  /*!< CAN Error code                 */
+
+}CAN_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
+  * @{
+  */
+
+/** @defgroup HAL_CAN_Error_Code HAL CAN Error Code
+  * @{
+  */
+#define   HAL_CAN_ERROR_NONE      0x00    /*!< No error             */
+#define   HAL_CAN_ERROR_EWG       0x01    /*!< EWG error            */
+#define   HAL_CAN_ERROR_EPV       0x02    /*!< EPV error            */
+#define   HAL_CAN_ERROR_BOF       0x04    /*!< BOF error            */
+#define   HAL_CAN_ERROR_STF       0x08    /*!< Stuff error          */
+#define   HAL_CAN_ERROR_FOR       0x10    /*!< Form error           */
+#define   HAL_CAN_ERROR_ACK       0x20    /*!< Acknowledgment error */
+#define   HAL_CAN_ERROR_BR        0x40    /*!< Bit recessive        */
+#define   HAL_CAN_ERROR_BD        0x80    /*!< LEC dominant         */
+#define   HAL_CAN_ERROR_CRC       0x100   /*!< LEC transfer error   */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_InitStatus CAN InitStatus
+  * @{
+  */
+#define CAN_INITSTATUS_FAILED       ((uint8_t)0x00)  /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS      ((uint8_t)0x01)  /*!< CAN initialization OK */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_operating_mode CAN Operating Mode
+  * @{
+  */
+#define CAN_MODE_NORMAL             ((uint32_t)0x00000000)                     /*!< Normal mode   */
+#define CAN_MODE_LOOPBACK           ((uint32_t)CAN_BTR_LBKM)                   /*!< Loopback mode */
+#define CAN_MODE_SILENT             ((uint32_t)CAN_BTR_SILM)                   /*!< Silent mode   */
+#define CAN_MODE_SILENT_LOOPBACK    ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM))  /*!< Loopback combined with silent mode */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_synchronisation_jump_width CAN Synchronisation Jump Width
+  * @{
+  */
+#define CAN_SJW_1TQ                 ((uint32_t)0x00000000)     /*!< 1 time quantum */
+#define CAN_SJW_2TQ                 ((uint32_t)CAN_BTR_SJW_0)  /*!< 2 time quantum */
+#define CAN_SJW_3TQ                 ((uint32_t)CAN_BTR_SJW_1)  /*!< 3 time quantum */
+#define CAN_SJW_4TQ                 ((uint32_t)CAN_BTR_SJW)    /*!< 4 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in bit segment 1
+  * @{
+  */
+#define CAN_BS1_1TQ                 ((uint32_t)0x00000000)                                       /*!< 1 time quantum  */
+#define CAN_BS1_2TQ                 ((uint32_t)CAN_BTR_TS1_0)                                    /*!< 2 time quantum  */
+#define CAN_BS1_3TQ                 ((uint32_t)CAN_BTR_TS1_1)                                    /*!< 3 time quantum  */
+#define CAN_BS1_4TQ                 ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0))                  /*!< 4 time quantum  */
+#define CAN_BS1_5TQ                 ((uint32_t)CAN_BTR_TS1_2)                                    /*!< 5 time quantum  */
+#define CAN_BS1_6TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0))                  /*!< 6 time quantum  */
+#define CAN_BS1_7TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1))                  /*!< 7 time quantum  */
+#define CAN_BS1_8TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0))  /*!< 8 time quantum  */
+#define CAN_BS1_9TQ                 ((uint32_t)CAN_BTR_TS1_3)                                    /*!< 9 time quantum  */
+#define CAN_BS1_10TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0))                  /*!< 10 time quantum */
+#define CAN_BS1_11TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1))                  /*!< 11 time quantum */
+#define CAN_BS1_12TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0))  /*!< 12 time quantum */
+#define CAN_BS1_13TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2))                  /*!< 13 time quantum */
+#define CAN_BS1_14TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0))  /*!< 14 time quantum */
+#define CAN_BS1_15TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1))  /*!< 15 time quantum */
+#define CAN_BS1_16TQ                ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in bit segment 2
+  * @{
+  */
+#define CAN_BS2_1TQ                 ((uint32_t)0x00000000)                       /*!< 1 time quantum */
+#define CAN_BS2_2TQ                 ((uint32_t)CAN_BTR_TS2_0)                    /*!< 2 time quantum */
+#define CAN_BS2_3TQ                 ((uint32_t)CAN_BTR_TS2_1)                    /*!< 3 time quantum */
+#define CAN_BS2_4TQ                 ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0))  /*!< 4 time quantum */
+#define CAN_BS2_5TQ                 ((uint32_t)CAN_BTR_TS2_2)                    /*!< 5 time quantum */
+#define CAN_BS2_6TQ                 ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0))  /*!< 6 time quantum */
+#define CAN_BS2_7TQ                 ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1))  /*!< 7 time quantum */
+#define CAN_BS2_8TQ                 ((uint32_t)CAN_BTR_TS2)                      /*!< 8 time quantum */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_mode  CAN Filter Mode
+  * @{
+  */
+#define CAN_FILTERMODE_IDMASK       ((uint8_t)0x00)  /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST       ((uint8_t)0x01)  /*!< Identifier list mode */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_scale CAN Filter Scale
+  * @{
+  */
+#define CAN_FILTERSCALE_16BIT       ((uint8_t)0x00)  /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT       ((uint8_t)0x01)  /*!< One 32-bit filter  */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_FIFO CAN Filter FIFO
+  * @{
+  */
+#define CAN_FILTER_FIFO0             ((uint8_t)0x00)  /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1             ((uint8_t)0x01)  /*!< Filter FIFO 1 assignment for filter x */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Identifier_Type CAN Identifier Type
+  * @{
+  */
+#define CAN_ID_STD             ((uint32_t)0x00000000)  /*!< Standard Id */
+#define CAN_ID_EXT             ((uint32_t)0x00000004)  /*!< Extended Id */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
+  * @{
+  */
+#define CAN_RTR_DATA                ((uint32_t)0x00000000)  /*!< Data frame */
+#define CAN_RTR_REMOTE              ((uint32_t)0x00000002)  /*!< Remote frame */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number Constants
+  * @{
+  */
+#define CAN_FIFO0                   ((uint8_t)0x00)  /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1                   ((uint8_t)0x01)  /*!< CAN FIFO 1 used to receive */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_flags CAN Flags
+  * @{
+  */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+   and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+   CAN_GetFlagStatus() function.  */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0             ((uint32_t)0x00000500)  /*!< Request MailBox0 flag         */
+#define CAN_FLAG_RQCP1             ((uint32_t)0x00000508)  /*!< Request MailBox1 flag         */
+#define CAN_FLAG_RQCP2             ((uint32_t)0x00000510)  /*!< Request MailBox2 flag         */
+#define CAN_FLAG_TXOK0             ((uint32_t)0x00000501)  /*!< Transmission OK MailBox0 flag */
+#define CAN_FLAG_TXOK1             ((uint32_t)0x00000509)  /*!< Transmission OK MailBox1 flag */
+#define CAN_FLAG_TXOK2             ((uint32_t)0x00000511)  /*!< Transmission OK MailBox2 flag */
+#define CAN_FLAG_TME0              ((uint32_t)0x0000051A)  /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1              ((uint32_t)0x0000051B)  /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME2              ((uint32_t)0x0000051C)  /*!< Transmit mailbox 0 empty flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0               ((uint32_t)0x00000203)  /*!< FIFO 0 Full flag    */
+#define CAN_FLAG_FOV0              ((uint32_t)0x00000204)  /*!< FIFO 0 Overrun flag */
+
+#define CAN_FLAG_FF1               ((uint32_t)0x00000403)  /*!< FIFO 1 Full flag    */
+#define CAN_FLAG_FOV1              ((uint32_t)0x00000404)  /*!< FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_INAK              ((uint32_t)0x00000100)  /*!<  Initialization acknowledge flag */
+#define CAN_FLAG_SLAK              ((uint32_t)0x00000101)  /*!< Sleep acknowledge flag */
+#define CAN_FLAG_ERRI              ((uint32_t)0x00000102)  /*!<  Error flag */
+#define CAN_FLAG_WKU               ((uint32_t)0x00000103)  /*!< Wake up flag           */
+#define CAN_FLAG_SLAKI             ((uint32_t)0x00000104)  /*!< Sleep acknowledge flag */
+
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+         In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG               ((uint32_t)0x00000300)  /*!< Error warning flag   */
+#define CAN_FLAG_EPV               ((uint32_t)0x00000301)  /*!< Error passive flag   */
+#define CAN_FLAG_BOF               ((uint32_t)0x00000302)  /*!< Bus-Off flag         */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Interrupts CAN Interrupts
+  * @{
+  */
+#define CAN_IT_TME                  ((uint32_t)CAN_IER_TMEIE)   /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0                 ((uint32_t)CAN_IER_FMPIE0)  /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_FF0                  ((uint32_t)CAN_IER_FFIE0)   /*!< FIFO 0 full interrupt            */
+#define CAN_IT_FOV0                 ((uint32_t)CAN_IER_FOVIE0)  /*!< FIFO 0 overrun interrupt         */
+#define CAN_IT_FMP1                 ((uint32_t)CAN_IER_FMPIE1)  /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_FF1                  ((uint32_t)CAN_IER_FFIE1)   /*!< FIFO 1 full interrupt            */
+#define CAN_IT_FOV1                 ((uint32_t)CAN_IER_FOVIE1)  /*!< FIFO 1 overrun interrupt         */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU                  ((uint32_t)CAN_IER_WKUIE)  /*!< Wake-up interrupt           */
+#define CAN_IT_SLK                  ((uint32_t)CAN_IER_SLKIE)  /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_EWG                  ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt   */
+#define CAN_IT_EPV                  ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt   */
+#define CAN_IT_BOF                  ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt         */
+#define CAN_IT_LEC                  ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERR                  ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt           */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Mailboxes_Definition CAN Mailboxes Definition
+  * @{
+  */
+#define CAN_TXMAILBOX_0   ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1   ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2   ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macros CAN Exported Macros
+  * @{
+  */
+
+/** @brief Reset CAN handle state
+  * @param  __HANDLE__: specifies the CAN Handle.
+  * @retval None
+  */
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+
+/**
+  * @brief  Enable the specified CAN interrupts.
+  * @param  __HANDLE__: CAN handle
+  * @param  __INTERRUPT__: CAN Interrupt
+  * @retval None
+  */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified CAN interrupts.
+  * @param  __HANDLE__: CAN handle
+  * @param  __INTERRUPT__: CAN Interrupt
+  * @retval None
+  */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Return the number of pending received messages.
+  * @param  __HANDLE__: CAN handle
+  * @param  __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+  * @retval The number of pending message.
+  */
+#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((uint8_t)((__HANDLE__)->Instance->RF0R&(uint32_t)0x03)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&(uint32_t)0x03)))
+
+/** @brief  Check whether the specified CAN flag is set or not.
+  * @param  __HANDLE__: CAN Handle
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+  *            @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+  *            @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+  *            @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+  *            @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+  *            @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+  *            @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+  *            @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+  *            @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+  *            @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+  *            @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+  *            @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+  *            @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+  *            @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+  *            @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+  *            @arg CAN_FLAG_WKU: Wake up Flag
+  *            @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+  *            @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+  *            @arg CAN_FLAG_EWG: Error Warning Flag
+  *            @arg CAN_FLAG_EPV: Error Passive Flag
+  *            @arg CAN_FLAG_BOF: Bus-Off Flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? ((((__HANDLE__)->Instance->TSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? ((((__HANDLE__)->Instance->RF0R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? ((((__HANDLE__)->Instance->RF1R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? ((((__HANDLE__)->Instance->MSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ ((((__HANDLE__)->Instance->ESR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief  Clear the specified CAN pending flag.
+  * @param  __HANDLE__: CAN Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+  *            @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+  *            @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+  *            @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+  *            @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+  *            @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+  *            @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+  *            @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+  *            @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+  *            @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+  *            @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+  *            @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+  *            @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+  *            @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+  *            @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+  *            @arg CAN_FLAG_WKU: Wake up Flag
+  *            @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+  *            @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? (((__HANDLE__)->Instance->TSR) = ((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? (((__HANDLE__)->Instance->RF0R) = ((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? (((__HANDLE__)->Instance->RF1R) = ((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__HANDLE__)->Instance->MSR) = ((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief  Check if the specified CAN interrupt source is enabled or disabled.
+  * @param  __HANDLE__: CAN Handle
+  * @param  __INTERRUPT__: specifies the CAN interrupt source to check.
+  *          This parameter can be one of the following values:
+  *             @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+  *             @arg CAN_IT_FMP0: FIFO0 message pending interrupt enable
+  *             @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+  * @brief  Check the transmission status of a CAN Frame.
+  * @param  __HANDLE__: CAN Handle
+  * @param  __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+  * @retval The new status of transmission  (TRUE or FALSE).
+  */
+#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
+ ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
+
+/**
+  * @brief  Release the specified receive FIFO.
+  * @param  __HANDLE__: CAN handle
+  * @param  __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+  * @retval None
+  */
+#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((__HANDLE__)->Instance->RF0R = CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R = CAN_RF1R_RFOM1))
+
+/**
+  * @brief  Cancel a transmit request.
+  * @param  __HANDLE__: CAN Handle
+  * @param  __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+  * @retval None
+  */
+#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ0) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ1) :\
+ ((__HANDLE__)->Instance->TSR = CAN_TSR_ABRQ2))
+
+/**
+  * @brief  Enable or disable the DBG Freeze for CAN.
+  * @param  __HANDLE__: CAN Handle
+  * @param  __NEWSTATE__: new state of the CAN peripheral.
+  *          This parameter can be: ENABLE (CAN reception/transmission is frozen
+  *          during debug. Reception FIFOs can still be accessed/controlled normally)
+  *          or DISABLE (CAN is working during debug).
+  * @retval None
+  */
+#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CAN_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions ***********************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+/**
+  * @}
+  */
+
+/** @addtogroup CAN_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+/**
+  * @}
+  */
+
+/** @addtogroup CAN_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions ***************************************************/
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CAN_Private_Types CAN Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Variables CAN Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Constants CAN Private Constants
+  * @{
+  */
+#define CAN_TXSTATUS_NOMAILBOX      ((uint8_t)0x04)  /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+#define CAN_FLAG_MASK  ((uint32_t)0x000000FF)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CAN_Private_Macros CAN Private Macros
+  * @{
+  */
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+                           ((MODE) == CAN_MODE_LOOPBACK)|| \
+                           ((MODE) == CAN_MODE_SILENT) || \
+                           ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+                         ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+                                  ((MODE) == CAN_FILTERMODE_IDLIST))
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+                                    ((SCALE) == CAN_FILTERSCALE_32BIT))
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+                                  ((FIFO) == CAN_FILTER_FIFO1))
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28)
+
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID)   ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID)   ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC)       ((DLC) <= ((uint8_t)0x08))
+
+#define IS_CAN_IDTYPE(IDTYPE)  (((IDTYPE) == CAN_ID_STD) || \
+                                ((IDTYPE) == CAN_ID_EXT))
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Functions CAN Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_cec.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1119 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_cec.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   CEC HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the High Definition Multimedia Interface 
+  *          Consumer Electronics Control Peripheral (CEC).
+  *           + Initialization and de-initialization function
+  *           + IO operation function
+  *           + Peripheral Control function
+  *
+  *           
+  @verbatim       
+ ===============================================================================
+                        ##### How to use this driver #####
+ ===============================================================================
+    [..]
+    The CEC HAL driver can be used as follow:
+    
+    (#) Declare a CEC_HandleTypeDef handle structure.
+    (#) Initialize the CEC low level resources by implementing the HAL_CEC_MspInit ()API:
+        (##) Enable the CEC interface clock.
+        (##) CEC pins configuration:
+            (+++) Enable the clock for the CEC GPIOs.
+            (+++) Configure these CEC pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_CEC_Transmit_IT()
+             and HAL_CEC_Receive_IT() APIs):
+            (+++) Configure the CEC interrupt priority.
+            (+++) Enable the NVIC CEC IRQ handle.
+            (+++) The specific CEC interrupts (Transmission complete interrupt, 
+                  RXNE interrupt and Error Interrupts) will be managed using the macros
+                  __HAL_CEC_ENABLE_IT() and __HAL_CEC_DISABLE_IT() inside the transmit 
+                  and receive process.
+
+    (#) Program the Signal Free Time (SFT) and SFT option, Tolerance, reception stop in
+        in case of Bit Rising Error, Error-Bit generation conditions, device logical
+        address and Listen mode in the hcec Init structure.
+
+    (#) Initialize the CEC registers by calling the HAL_CEC_Init() API.
+
+  [..]        
+    (@) This API (HAL_CEC_Init()) configures also the low level Hardware (GPIO, CLOCK, CORTEX...etc)
+        by calling the customed HAL_CEC_MspInit() API.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CEC CEC 
+  * @brief HAL CEC module driver
+  * @{
+  */
+#ifdef HAL_CEC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+  * @{
+  */
+#define CEC_CFGR_FIELDS     (CEC_CFGR_SFT | CEC_CFGR_RXTOL | CEC_CFGR_BRESTP \
+                           | CEC_CFGR_BREGEN | CEC_CFGR_LBPEGEN | CEC_CFGR_SFTOPT \
+                           | CEC_CFGR_BRDNOGEN | CEC_CFGR_OAR | CEC_CFGR_LSTN)
+/**
+  * @}
+  */
+ 
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+  * @{
+  */
+static HAL_StatusTypeDef CEC_Transmit_IT(CEC_HandleTypeDef *hcec);
+static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec);
+/**
+  * @}
+  */
+  
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup CEC_Exported_Functions CEC Exported Functions
+  * @{
+  */
+
+/** @defgroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions 
+  *
+@verbatim                                                
+===============================================================================
+            ##### Initialization and Configuration functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to initialize the CEC
+      (+) The following parameters need to be configured: 
+        (++) SignalFreeTime
+        (++) Tolerance 
+        (++) BRERxStop                 (RX stopped or not upon Bit Rising Error)
+        (++) BREErrorBitGen            (Error-Bit generation in case of Bit Rising Error)
+        (++) LBPEErrorBitGen           (Error-Bit generation in case of Long Bit Period Error)
+        (++) BroadcastMsgNoErrorBitGen (Error-bit generation in case of broadcast message error)
+        (++) SignalFreeTimeOption      (SFT Timer start definition)
+        (++) OwnAddress                (CEC device address)
+        (++) ListenMode
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Initializes the CEC mode according to the specified
+  *         parameters in the CEC_InitTypeDef and creates the associated handle .
+  * @param hcec: CEC handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec)
+{
+  uint32_t tmpreg = 0x0;
+  
+  /* Check the CEC handle allocation */
+  if(hcec == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */ 
+  assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
+  assert_param(IS_CEC_SIGNALFREETIME(hcec->Init.SignalFreeTime));
+  assert_param(IS_CEC_TOLERANCE(hcec->Init.Tolerance));  
+  assert_param(IS_CEC_BRERXSTOP(hcec->Init.BRERxStop));
+  assert_param(IS_CEC_BREERRORBITGEN(hcec->Init.BREErrorBitGen));
+  assert_param(IS_CEC_LBPEERRORBITGEN(hcec->Init.LBPEErrorBitGen));
+  assert_param(IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(hcec->Init.BroadcastMsgNoErrorBitGen));
+  assert_param(IS_CEC_SFTOP(hcec->Init.SignalFreeTimeOption)); 
+  assert_param(IS_CEC_OAR_ADDRESS(hcec->Init.OwnAddress)); 
+  assert_param(IS_CEC_LISTENING_MODE(hcec->Init.ListenMode));
+  assert_param(IS_CEC_ADDRESS(hcec->Init.InitiatorAddress));  
+
+  
+  if(hcec->State == HAL_CEC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hcec->Lock = HAL_UNLOCKED;   
+    /* Init the low level hardware : GPIO, CLOCK */
+    HAL_CEC_MspInit(hcec);
+  }
+  
+  hcec->State = HAL_CEC_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_CEC_DISABLE(hcec);
+  
+  tmpreg = hcec->Init.SignalFreeTime;
+  tmpreg |= hcec->Init.Tolerance;
+  tmpreg |= hcec->Init.BRERxStop;
+  tmpreg |= hcec->Init.BREErrorBitGen;
+  tmpreg |= hcec->Init.LBPEErrorBitGen;
+  tmpreg |= hcec->Init.BroadcastMsgNoErrorBitGen;
+  tmpreg |= hcec->Init.SignalFreeTimeOption;
+  tmpreg |= (hcec->Init.OwnAddress << CEC_CFGR_OAR_LSB_POS);
+  tmpreg |= hcec->Init.ListenMode;
+  
+  /* Write to CEC Control Register */
+  MODIFY_REG(hcec->Instance->CFGR, CEC_CFGR_FIELDS, tmpreg);
+
+  /* Enable the Peripheral */
+  __HAL_CEC_ENABLE(hcec);
+  
+  hcec->State = HAL_CEC_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief DeInitializes the CEC peripheral 
+  * @param hcec: CEC handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec)
+{
+  /* Check the CEC handle allocation */
+  if(hcec == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
+
+  hcec->State = HAL_CEC_STATE_BUSY;
+  
+  /* DeInit the low level hardware */
+  HAL_CEC_MspDeInit(hcec);
+  /* Disable the Peripheral */
+  __HAL_CEC_DISABLE(hcec);
+  
+  hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+  hcec->State = HAL_CEC_STATE_RESET;
+  
+  /* Process Unlock */
+  __HAL_UNLOCK(hcec);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief CEC MSP Init
+  * @param hcec: CEC handle
+  * @retval None
+  */
+ __weak void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcec);
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_CEC_MspInit can be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief CEC MSP DeInit
+  * @param hcec: CEC handle
+  * @retval None
+  */
+ __weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcec);
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_CEC_MspDeInit can be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Exported_Functions_Group2 Input and Output operation functions 
+  *  @brief CEC Transmit/Receive functions 
+  *
+@verbatim     
+ ===============================================================================
+                      ##### IO operation functions ##### 
+ ===============================================================================  
+    This subsection provides a set of functions allowing to manage the CEC data transfers.
+    
+    (#) The CEC handle must contain the initiator (TX side) and the destination (RX side)
+        logical addresses (4-bit long addresses, 0xF for broadcast messages destination)
+    
+    (#) There are two mode of transfer:
+       (+) Blocking mode: The communication is performed in polling mode. 
+            The HAL status of all data processing is returned by the same function 
+            after finishing transfer.  
+       (+) No-Blocking mode: The communication is performed using Interrupts. 
+           These API's return the HAL status.
+           The end of the data processing will be indicated through the 
+           dedicated CEC IRQ when using Interrupt mode.
+           The HAL_CEC_TxCpltCallback(), HAL_CEC_RxCpltCallback() user callbacks 
+           will be executed respectively at the end of the transmit or Receive process
+           The HAL_CEC_ErrorCallback()user callback will be executed when a communication 
+           error is detected
+
+    (#) Blocking mode API's are :
+        (+) HAL_CEC_Transmit()
+        (+) HAL_CEC_Receive() 
+        
+    (#) Non-Blocking mode API's with Interrupt are :
+        (+) HAL_CEC_Transmit_IT()
+        (+) HAL_CEC_Receive_IT()
+        (+) HAL_CEC_IRQHandler()
+
+    (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+        (+) HAL_CEC_TxCpltCallback()
+        (+) HAL_CEC_RxCpltCallback()
+        (+) HAL_CEC_ErrorCallback()
+      
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Send data in blocking mode 
+  * @param hcec: CEC handle
+  * @param DestinationAddress: destination logical address      
+  * @param pData: pointer to input byte data buffer
+  * @param Size: amount of data to be sent in bytes (without counting the header).
+  *              0 means only the header is sent (ping operation).
+  *              Maximum TX size is 15 bytes (1 opcode and up to 14 operands).    
+  * @param  Timeout: Timeout duration.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout)
+{
+  uint8_t  temp = 0;  
+  uint32_t tempisr = 0;   
+  uint32_t tickstart = 0;
+
+  if((hcec->State == HAL_CEC_STATE_READY) && (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) == RESET)) 
+  {
+    hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+    if((pData == NULL ) && (Size > 0)) 
+    {
+      hcec->State = HAL_CEC_STATE_ERROR;
+      return  HAL_ERROR;                                    
+    }
+
+    assert_param(IS_CEC_ADDRESS(DestinationAddress)); 
+    assert_param(IS_CEC_MSGSIZE(Size));
+    
+    /* Process Locked */
+    __HAL_LOCK(hcec);
+    
+    hcec->State = HAL_CEC_STATE_BUSY_TX;
+
+    hcec->TxXferCount = Size;
+    
+    /* case no data to be sent, sender is only pinging the system */
+    if (Size == 0)
+    {
+      /* Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */
+      __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+    }
+    
+    /* send header block */
+    temp = ((uint32_t)hcec->Init.InitiatorAddress << CEC_INITIATOR_LSB_POS) | DestinationAddress;
+    hcec->Instance->TXDR = temp;
+    /* Set TX Start of Message  (TXSOM) bit */
+    __HAL_CEC_FIRST_BYTE_TX_SET(hcec);
+    
+    while (hcec->TxXferCount > 0)
+    {
+      hcec->TxXferCount--;
+
+      tickstart = HAL_GetTick();
+      while(HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_FLAG_TXBR))
+      {
+      	if(Timeout != HAL_MAX_DELAY)
+        {
+          if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+          {
+            hcec->State = HAL_CEC_STATE_TIMEOUT;                
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcec);       
+            return HAL_TIMEOUT;
+          }
+        }        
+
+        /* check whether error occurred while waiting for TXBR to be set:
+         * has Tx underrun occurred ?
+         * has Tx error occurred ?
+         * has Tx Missing Acknowledge error occurred ? 
+         * has Arbitration Loss error occurred ? */
+        tempisr = hcec->Instance->ISR;
+        if ((tempisr & (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE|CEC_FLAG_ARBLST)) != 0)
+        {
+          /* copy ISR for error handling purposes */
+          hcec->ErrorCode = tempisr;
+         /* clear all error flags by default */
+         __HAL_CEC_CLEAR_FLAG(hcec, (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE|CEC_FLAG_ARBLST));
+         hcec->State = HAL_CEC_STATE_ERROR;
+         __HAL_UNLOCK(hcec);
+         return  HAL_ERROR;                                    
+        }
+      } 
+      /* TXBR to clear BEFORE writing TXDR register */
+      __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR);
+      if (hcec->TxXferCount == 0)
+      {
+        /* if last byte transmission, set TX End of Message (TXEOM) bit */
+        __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+      }
+      hcec->Instance->TXDR = *pData++;
+      
+      /* error check after TX byte write up */
+      tempisr = hcec->Instance->ISR;
+      if ((tempisr & (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE|CEC_FLAG_ARBLST)) != 0)
+      {
+        /* copy ISR for error handling purposes */
+        hcec->ErrorCode = tempisr;
+        /* clear all error flags by default */
+        __HAL_CEC_CLEAR_FLAG(hcec, (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE|CEC_FLAG_ARBLST));
+        hcec->State = HAL_CEC_STATE_ERROR;
+        __HAL_UNLOCK(hcec);
+        return  HAL_ERROR;                                    
+      }
+    } /* end while (while (hcec->TxXferCount > 0)) */
+    
+   
+    /* if no error up to this point, check that transmission is  
+     * complete, that is wait until TXEOM is reset */
+    tickstart = HAL_GetTick();
+
+    while (HAL_IS_BIT_SET(hcec->Instance->CR, CEC_CR_TXEOM))
+    {
+    	if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+        {
+          hcec->State = HAL_CEC_STATE_ERROR;
+          __HAL_UNLOCK(hcec);             
+          return HAL_TIMEOUT;
+        }
+      } 
+    }
+
+    /* Final error check once all bytes have been transmitted */
+    tempisr = hcec->Instance->ISR;
+    if ((tempisr & (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE)) != 0)
+    {
+      /* copy ISR for error handling purposes */
+      hcec->ErrorCode = tempisr;
+      /* clear all error flags by default */
+      __HAL_CEC_CLEAR_FLAG(hcec, (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE));
+      hcec->State = HAL_CEC_STATE_ERROR;
+      __HAL_UNLOCK(hcec);
+      return  HAL_ERROR;                                    
+    } 
+
+    hcec->State = HAL_CEC_STATE_READY;
+    __HAL_UNLOCK(hcec);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;   
+  }
+}
+
+/**
+  * @brief Receive data in blocking mode. Must be invoked when RXBR has been set. 
+  * @param hcec: CEC handle
+  * @param pData: pointer to received data buffer.
+  * @param Timeout: Timeout duration.
+  *       Note that the received data size is not known beforehand, the latter is known
+  *       when the reception is complete and is stored in hcec->RxXferSize.  
+  *       hcec->RxXferSize is the sum of opcodes + operands (0 to 14 operands max).
+  *       If only a header is received, hcec->RxXferSize = 0    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout)
+{ 
+  uint32_t temp;
+  uint32_t tickstart = 0;   
+
+  if (hcec->State == HAL_CEC_STATE_READY)
+  { 
+    hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+    if (pData == NULL ) 
+    {
+      hcec->State = HAL_CEC_STATE_ERROR;
+      return  HAL_ERROR;                                    
+    }
+    
+    hcec->RxXferSize = 0;
+    /* Process Locked */
+    __HAL_LOCK(hcec);
+    
+    
+    /* Rx loop until CEC_ISR_RXEND  is set */
+    while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_FLAG_RXEND))
+    {
+      tickstart = HAL_GetTick();
+      /* Wait for next byte to be received */
+      while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_FLAG_RXBR))
+      {
+    	  if(Timeout != HAL_MAX_DELAY)
+        {
+          if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+          {
+            hcec->State = HAL_CEC_STATE_TIMEOUT;
+            __HAL_UNLOCK(hcec);
+            return HAL_TIMEOUT;
+          }
+        }
+        /* any error so far ? 
+         * has Rx Missing Acknowledge occurred ?
+         * has Rx Long Bit Period error occurred ?
+         * has Rx Short Bit Period error occurred ? 
+         * has Rx Bit Rising error occurred ?             
+         * has Rx Overrun error occurred ? */
+        temp = (uint32_t) (hcec->Instance->ISR);
+        if ((temp & (CEC_FLAG_RXACKE|CEC_FLAG_LBPE|CEC_FLAG_SBPE|CEC_FLAG_BRE|CEC_FLAG_RXOVR)) != 0)
+        {
+          /* copy ISR for error handling purposes */
+          hcec->ErrorCode = temp;
+          /* clear all error flags by default */
+          __HAL_CEC_CLEAR_FLAG(hcec,(CEC_FLAG_RXACKE|CEC_FLAG_LBPE|CEC_FLAG_SBPE|CEC_FLAG_BRE|CEC_FLAG_RXOVR));
+          hcec->State = HAL_CEC_STATE_ERROR;
+          __HAL_UNLOCK(hcec);
+          return  HAL_ERROR;                                    
+        }
+      } /* while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXBR)) */
+  
+
+      /* read received data */
+      *pData++ = hcec->Instance->RXDR;
+      temp = (uint32_t) (hcec->Instance->ISR);
+      /* end of message ? */
+      if ((temp &  CEC_ISR_RXEND) != 0)      
+      {
+         assert_param(IS_CEC_MSGSIZE(hcec->RxXferSize));
+         __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_RXEND);
+          hcec->State = HAL_CEC_STATE_READY;  
+         __HAL_UNLOCK(hcec);  
+         return HAL_OK; 
+      }
+      
+      /* clear Rx-Byte Received flag */
+      __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_RXBR); 
+      /* increment payload byte counter */
+       hcec->RxXferSize++;
+    } /* while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXEND)) */ 
+    
+    /* if the instructions below are executed, it means RXEND was set when RXBR was 
+     * set for the first time:
+     * the code within the "while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXEND))"
+     * loop has not been executed and this means a single byte has been sent */
+    *pData++ = hcec->Instance->RXDR;
+     /* only one header is received: RxXferSize is set to 0 (no operand, no opcode) */ 
+     hcec->RxXferSize = 0;
+     __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXEND);
+                             
+    hcec->State = HAL_CEC_STATE_READY;  
+    __HAL_UNLOCK(hcec);  
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;   
+  }
+}
+
+/**
+  * @brief Send data in interrupt mode 
+  * @param hcec: CEC handle 
+  * @param DestinationAddress: destination logical address      
+  * @param pData: pointer to input byte data buffer
+  * @param Size: amount of data to be sent in bytes (without counting the header).
+  *              0 means only the header is sent (ping operation).
+  *              Maximum TX size is 15 bytes (1 opcode and up to 14 operands).    
+  * @retval HAL status
+  */  
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size)
+{
+  uint8_t  temp = 0; 
+  /* if the IP isn't already busy and if there is no previous transmission
+     already pending due to arbitration lost */
+  if (((hcec->State == HAL_CEC_STATE_READY) || (hcec->State == HAL_CEC_STATE_STANDBY_RX)) 
+  &&   (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) == RESET)) 
+  {    
+    if((pData == NULL ) && (Size > 0)) 
+    {
+      hcec->State = HAL_CEC_STATE_ERROR;
+      return  HAL_ERROR;                                    
+    }
+
+    assert_param(IS_CEC_ADDRESS(DestinationAddress)); 
+    assert_param(IS_CEC_MSGSIZE(Size));
+    
+    /* Process Locked */
+    __HAL_LOCK(hcec);
+    hcec->pTxBuffPtr = pData;
+    hcec->State = HAL_CEC_STATE_BUSY_TX;
+    hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+    
+    /* Disable Peripheral to write CEC_IER register */
+    __HAL_CEC_DISABLE(hcec);
+    
+    /* Enable the following two CEC Transmission interrupts as
+     * well as the following CEC Transmission Errors interrupts: 
+     * Tx Byte Request IT 
+     * End of Transmission IT
+     * Tx Missing Acknowledge IT
+     * Tx-Error IT
+     * Tx-Buffer Underrun IT 
+     * Tx arbitration lost     */
+    __HAL_CEC_ENABLE_IT(hcec, CEC_IT_TXBR|CEC_IT_TXEND|CEC_IER_TX_ALL_ERR);
+                                     
+    /* Enable the Peripheral */
+    __HAL_CEC_ENABLE(hcec);
+  
+    /* initialize the number of bytes to send,
+     * 0 means only one header is sent (ping operation) */
+    hcec->TxXferCount = Size;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcec); 
+    
+    /* in case of no payload (Size = 0), sender is only pinging the system;
+     * Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */
+    if (Size == 0)
+    {
+      __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+    }
+    
+    /* send header block */
+    temp = ((uint32_t)hcec->Init.InitiatorAddress << CEC_INITIATOR_LSB_POS) | DestinationAddress;
+    hcec->Instance->TXDR = temp;
+    /* Set TX Start of Message  (TXSOM) bit */
+    __HAL_CEC_FIRST_BYTE_TX_SET(hcec);
+    
+    return HAL_OK;
+  }
+    /* if the IP is already busy or if there is a previous transmission
+     already pending due to arbitration loss */
+  else if ((hcec->State == HAL_CEC_STATE_BUSY_TX)
+        || (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) != RESET))
+  {
+    __HAL_LOCK(hcec);
+    /* set state to BUSY TX, in case it wasn't set already (case
+     * of transmission new attempt after arbitration loss) */
+    if (hcec->State != HAL_CEC_STATE_BUSY_TX)
+    {
+      hcec->State = HAL_CEC_STATE_BUSY_TX;
+    }
+
+    /* if all data have been sent */
+    if(hcec->TxXferCount == 0)
+    {
+      /* Disable Peripheral to write CEC_IER register */
+      __HAL_CEC_DISABLE(hcec);
+      
+      /* Disable the CEC Transmission Interrupts */
+      __HAL_CEC_DISABLE_IT(hcec, CEC_IT_TXBR|CEC_IT_TXEND);
+      /* Disable the CEC Transmission Error Interrupts */
+      __HAL_CEC_DISABLE_IT(hcec, CEC_IER_TX_ALL_ERR);
+      
+      /* Enable the Peripheral */
+      __HAL_CEC_ENABLE(hcec);
+    
+      __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR|CEC_FLAG_TXEND);
+          
+      hcec->State = HAL_CEC_STATE_READY;
+      /* Call the Process Unlocked before calling the Tx call back API to give the possibility to
+      start again the Transmission under the Tx call back API */
+      __HAL_UNLOCK(hcec);
+      
+      HAL_CEC_TxCpltCallback(hcec);
+      
+      return HAL_OK;
+    }
+    else
+    {
+      if (hcec->TxXferCount == 1)
+      {
+        /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
+        __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+      }
+      /* clear Tx-Byte request flag */
+       __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR); 
+       hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
+      hcec->TxXferCount--;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcec);
+  
+      return HAL_OK;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;   
+  }
+}
+
+/**
+  * @brief Receive data in interrupt mode. 
+  * @param hcec: CEC handle
+  * @param pData: pointer to received data buffer.
+  * Note that the received data size is not known beforehand, the latter is known
+  * when the reception is complete and is stored in hcec->RxXferSize.  
+  * hcec->RxXferSize is the sum of opcodes + operands (0 to 14 operands max).
+  * If only a header is received, hcec->RxXferSize = 0    
+  * @retval HAL status
+  */  
+HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData)
+{  
+  if(hcec->State == HAL_CEC_STATE_READY)
+  {
+    if(pData == NULL ) 
+    {
+      hcec->State = HAL_CEC_STATE_ERROR;
+      return HAL_ERROR;                                    
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hcec);
+    hcec->RxXferSize = 0;
+    hcec->pRxBuffPtr = pData;
+    hcec->ErrorCode = HAL_CEC_ERROR_NONE;
+    /* the IP is moving to a ready to receive state */
+    hcec->State = HAL_CEC_STATE_STANDBY_RX;
+
+    /* Disable Peripheral to write CEC_IER register */
+    __HAL_CEC_DISABLE(hcec);
+    
+    /* Enable the following CEC Reception Error Interrupts: 
+     * Rx overrun
+     * Rx bit rising error
+     * Rx short bit period error
+     * Rx long bit period error
+     * Rx missing acknowledge  */
+    __HAL_CEC_ENABLE_IT(hcec, CEC_IER_RX_ALL_ERR);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcec);
+    
+    /* Enable the following two CEC Reception interrupts: 
+     * Rx Byte Received IT 
+     * End of Reception IT */
+    __HAL_CEC_ENABLE_IT(hcec, CEC_IT_RXBR|CEC_IT_RXEND);
+    
+    __HAL_CEC_ENABLE(hcec);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief Get size of the received frame.
+  * @param hcec: CEC handle
+  * @retval Frame size
+  */
+uint32_t HAL_CEC_GetReceivedFrameSize(CEC_HandleTypeDef *hcec)
+{
+  return hcec->RxXferSize;
+}
+  
+/**
+  * @brief This function handles CEC interrupt requests.
+  * @param hcec: CEC handle
+  * @retval None
+  */
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec)
+{
+  /* save interrupts register for further error or interrupts handling purposes */
+  hcec->ErrorCode = hcec->Instance->ISR;
+  /* CEC TX missing acknowledge error interrupt occurred -------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXACKE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXACKE) != RESET))
+  { 
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXACKE);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+  
+  /* CEC transmit error interrupt occurred --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXERR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXERR) != RESET))
+  { 
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXERR);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+  
+  /* CEC TX underrun error interrupt occurred --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXUDR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXUDR) != RESET))
+  { 
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXUDR);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+  
+  /* CEC TX arbitration error interrupt occurred --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_ARBLST) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_ARBLST) != RESET))
+  { 
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_ARBLST);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }
+  
+  /* CEC RX overrun error interrupt occurred --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RXOVR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_RXOVR) != RESET))
+  { 
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXOVR);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  } 
+  
+  /* CEC RX bit rising error interrupt occurred --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_BRE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_BRE) != RESET))
+  { 
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_BRE);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }   
+  
+  /* CEC RX short bit period error interrupt occurred --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_SBPE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_SBPE) != RESET))
+  { 
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_SBPE);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }   
+  
+  /* CEC RX long bit period error interrupt occurred --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_LBPE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_LBPE) != RESET))
+  { 
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_LBPE);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }   
+  
+  /* CEC RX missing acknowledge error interrupt occurred --------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RXACKE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_RXACKE) != RESET))
+  { 
+    __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXACKE);
+    hcec->State = HAL_CEC_STATE_ERROR;
+  }   
+
+  if ((hcec->ErrorCode & CEC_ISR_ALL_ERROR) != 0)
+  {
+    HAL_CEC_ErrorCallback(hcec);
+  }
+
+  /* CEC RX byte received interrupt  ---------------------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RXBR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_RXBR) != RESET))
+  { 
+    /* RXBR IT is cleared during HAL_CEC_Transmit_IT processing */
+    CEC_Receive_IT(hcec);
+  }
+  
+  /* CEC RX end received interrupt  ---------------------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RXEND) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_RXEND) != RESET))
+  { 
+    /* RXBR IT is cleared during HAL_CEC_Transmit_IT processing */
+    CEC_Receive_IT(hcec);
+  }
+  
+  
+  /* CEC TX byte request interrupt ------------------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXBR) != RESET) &&(__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXBR) != RESET))
+  {
+    /* TXBR IT is cleared during HAL_CEC_Transmit_IT processing */
+    CEC_Transmit_IT(hcec);
+  } 
+  
+  /* CEC TX end interrupt ------------------------------------------------*/
+  if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXEND) != RESET) &&(__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXEND) != RESET))
+  {
+   /* TXEND IT is cleared during HAL_CEC_Transmit_IT processing */
+    CEC_Transmit_IT(hcec);
+  } 
+}
+
+/**
+  * @brief Tx Transfer completed callback
+  * @param hcec: CEC handle
+  * @retval None
+  */
+ __weak void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcec);  
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_CEC_TxCpltCallback can be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief Rx Transfer completed callback
+  * @param hcec: CEC handle
+  * @retval None
+  */
+__weak void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcec);
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_CEC_TxCpltCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @brief CEC error callbacks
+  * @param hcec: CEC handle
+  * @retval None
+  */
+ __weak void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcec);
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_CEC_ErrorCallback can be implemented in the user file
+   */ 
+}
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control function 
+  *  @brief   CEC control functions 
+  *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control function #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the CEC.
+     (+) HAL_CEC_GetState() API can be helpful to check in run-time the state of the CEC peripheral. 
+@endverbatim
+  * @{
+  */
+/**
+  * @brief return the CEC state
+  * @param hcec: CEC handle
+  * @retval HAL state
+  */
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec)
+{
+  return hcec->State;
+}
+
+/**
+* @brief  Return the CEC error code
+* @param  hcec : pointer to a CEC_HandleTypeDef structure that contains
+  *              the configuration information for the specified CEC.
+* @retval CEC Error Code
+*/
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec)
+{
+  return hcec->ErrorCode;
+}
+
+/**
+  * @}
+  */
+  
+/**
+  * @brief Send data in interrupt mode 
+  * @param hcec: CEC handle. 
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_CEC_Transmit_IT()   
+  * @retval HAL status
+  */  
+static HAL_StatusTypeDef CEC_Transmit_IT(CEC_HandleTypeDef *hcec)
+{
+  /* if the IP is already busy or if there is a previous transmission
+     already pending due to arbitration loss */
+  if ((hcec->State == HAL_CEC_STATE_BUSY_TX)
+        || (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) != RESET))
+  {
+    __HAL_LOCK(hcec);
+    /* set state to BUSY TX, in case it wasn't set already (case
+     * of transmission new attempt after arbitration loss) */
+    if (hcec->State != HAL_CEC_STATE_BUSY_TX)
+    {
+      hcec->State = HAL_CEC_STATE_BUSY_TX;
+    }
+
+    /* if all data have been sent */
+    if(hcec->TxXferCount == 0)
+    {
+      /* Disable Peripheral to write CEC_IER register */
+      __HAL_CEC_DISABLE(hcec);
+      
+      /* Disable the CEC Transmission Interrupts */
+      __HAL_CEC_DISABLE_IT(hcec, CEC_IT_TXBR|CEC_IT_TXEND);
+      /* Disable the CEC Transmission Error Interrupts */
+      __HAL_CEC_DISABLE_IT(hcec, CEC_IER_TX_ALL_ERR);
+      
+      /* Enable the Peripheral */
+      __HAL_CEC_ENABLE(hcec);
+    
+      __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_TXBR|CEC_FLAG_TXEND);
+          
+      hcec->State = HAL_CEC_STATE_READY;
+      /* Call the Process Unlocked before calling the Tx call back API to give the possibility to
+      start again the Transmission under the Tx call back API */
+      __HAL_UNLOCK(hcec);
+      
+      HAL_CEC_TxCpltCallback(hcec);
+      
+      return HAL_OK;
+    }
+    else
+    {
+      if (hcec->TxXferCount == 1)
+      {
+        /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
+        __HAL_CEC_LAST_BYTE_TX_SET(hcec);
+      }
+      /* clear Tx-Byte request flag */
+       __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_TXBR); 
+       hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
+      hcec->TxXferCount--;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcec);
+  
+      return HAL_OK;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;   
+  }
+}
+
+
+/**
+  * @brief Receive data in interrupt mode. 
+  * @param hcec: CEC handle.
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_CEC_Receive_IT()   
+  * @retval HAL status
+  */  
+static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec)
+{
+  uint32_t tempisr;
+  
+  /* Three different conditions are tested to carry out the RX IT processing:
+   * - the IP is in reception stand-by (the IP state is HAL_CEC_STATE_STANDBY_RX) and 
+   *   the reception of the first byte is starting
+   * - a message reception is already on-going (the IP state is HAL_CEC_STATE_BUSY_RX)
+   *   and a new byte is being received
+   * - a transmission has just been started (the IP state is HAL_CEC_STATE_BUSY_TX)
+   *   but has been interrupted by a new message reception or discarded due to 
+   *   arbitration loss: the reception of the first or higher priority message 
+   *   (the arbitration winner) is starting */
+  if ((hcec->State == HAL_CEC_STATE_STANDBY_RX) 
+  ||  (hcec->State == HAL_CEC_STATE_BUSY_RX)
+  ||  (hcec->State == HAL_CEC_STATE_BUSY_TX)) 
+  {
+    /* reception is starting */ 
+    hcec->State = HAL_CEC_STATE_BUSY_RX;
+    tempisr =  (uint32_t) (hcec->Instance->ISR);
+    if ((tempisr & CEC_FLAG_RXBR) != 0)
+    {
+      /* Process Locked */
+      __HAL_LOCK(hcec);
+      /* read received byte */
+      *hcec->pRxBuffPtr++ = hcec->Instance->RXDR;
+      /* if last byte has been received */      
+      if ((tempisr & CEC_FLAG_RXEND) != 0)
+      {
+        /* clear IT */
+        __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR|CEC_FLAG_RXEND);
+        /* RX interrupts are not disabled at this point.
+         * Indeed, to disable the IT, the IP must be disabled first
+         * which resets the TXSOM flag. In case of arbitration loss,
+         * this leads to a transmission abort.
+         * Therefore, RX interruptions disabling if so required,
+         * is done in HAL_CEC_RxCpltCallback */
+ 
+        /* IP state is moved to READY.
+         * If the IP must remain in standby mode to listen
+         * any new message, it is up to HAL_CEC_RxCpltCallback
+         * to move it again to HAL_CEC_STATE_STANDBY_RX */  
+        hcec->State = HAL_CEC_STATE_READY; 
+        
+        /* Call the Process Unlocked before calling the Rx call back API */
+        __HAL_UNLOCK(hcec);
+        HAL_CEC_RxCpltCallback(hcec);
+        
+        return HAL_OK;
+      } 
+      __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR);  
+
+      hcec->RxXferSize++;
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcec);
+      
+      return HAL_OK;
+    }
+    else
+    {
+      return HAL_BUSY; 
+    }
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+/**
+  * @}
+  */  
+#endif /* HAL_CEC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_cec.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,679 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_cec.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of CEC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CEC_H
+#define __STM32F7xx_HAL_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CEC
+  * @{
+  */
+  
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup CEC_Exported_Types CEC Exported Types
+  * @{
+  */
+  
+/** 
+  * @brief CEC Init Structure definition  
+  */ 
+typedef struct
+{
+  uint32_t SignalFreeTime;               /*!< Set SFT field, specifies the Signal Free Time.
+                                              It can be one of @ref CEC_Signal_Free_Time 
+                                              and belongs to the set {0,...,7} where  
+                                              0x0 is the default configuration 
+                                              else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
+
+  uint32_t Tolerance;                    /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
+                                              it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE 
+                                              or CEC_EXTENDED_TOLERANCE */
+
+  uint32_t BRERxStop;                    /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception. 
+                                              CEC_NO_RX_STOP_ON_BRE: reception is not stopped. 
+                                              CEC_RX_STOP_ON_BRE:    reception is stopped. */
+
+  uint32_t BREErrorBitGen;               /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
+                                              CEC line upon Bit Rising Error detection.
+                                              CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
+                                              CEC_BRE_ERRORBIT_GENERATION:    error-bit generation if BRESTP is set. */
+                                              
+  uint32_t LBPEErrorBitGen;              /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
+                                              CEC line upon Long Bit Period Error detection.
+                                              CEC_LBPE_ERRORBIT_NO_GENERATION:  no error-bit generation. 
+                                              CEC_LBPE_ERRORBIT_GENERATION:     error-bit generation. */  
+                                              
+  uint32_t BroadcastMsgNoErrorBitGen;    /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
+                                              upon an error detected on a broadcast message. 
+                                              
+                                              It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
+                                              
+                                              1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
+                                                 a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE 
+                                                    and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
+                                                 b) LBPE detection: error-bit generation on the CEC line 
+                                                    if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
+                                                    
+                                              2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
+                                                 no error-bit generation in case neither a) nor b) are satisfied. Additionally,
+                                                 there is no error-bit generation in case of Short Bit Period Error detection in 
+                                                 a broadcast message while LSTN bit is set. */
+ 
+  uint32_t SignalFreeTimeOption;         /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
+                                              CEC_SFT_START_ON_TXSOM SFT:    timer starts when TXSOM is set by software.
+                                              CEC_SFT_START_ON_TX_RX_END:  SFT timer starts automatically at the end of message transmission/reception. */
+
+  uint32_t OwnAddress;                   /*!< Set OAR field, specifies CEC device address within a 15-bit long field */
+  
+  uint32_t ListenMode;                   /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
+  
+                                              CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its 
+                                                own address (OAR). Messages addressed to different destination are ignored. 
+                                                Broadcast messages are always received.
+                                                
+                                              CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own 
+                                                address (OAR) with positive acknowledge. Messages addressed to different destination 
+                                                are received, but without interfering with the CEC bus: no acknowledge sent.  */
+
+  uint8_t  InitiatorAddress;             /* Initiator address (source logical address, sent in each header) */
+
+}CEC_InitTypeDef;
+
+/** 
+  * @brief HAL CEC State structures definition  
+  */ 
+typedef enum
+{
+  HAL_CEC_STATE_RESET             = 0x00,    /*!< Peripheral Reset state                              */
+  HAL_CEC_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use            */
+  HAL_CEC_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing                      */
+  HAL_CEC_STATE_BUSY_TX           = 0x03,    /*!< Data Transmission process is ongoing                */
+  HAL_CEC_STATE_BUSY_RX           = 0x04,    /*!< Data Reception process is ongoing                   */
+  HAL_CEC_STATE_STANDBY_RX        = 0x05,    /*!< IP ready to receive, doesn't prevent IP to transmit */
+  HAL_CEC_STATE_TIMEOUT           = 0x06,    /*!< Timeout state                                       */
+  HAL_CEC_STATE_ERROR             = 0x07     /*!< State Error                                         */
+}HAL_CEC_StateTypeDef;
+
+/** 
+  * @brief  CEC handle Structure definition  
+  */  
+typedef struct
+{
+  CEC_TypeDef             *Instance;      /* CEC registers base address */
+  
+  CEC_InitTypeDef         Init;           /* CEC communication parameters */
+  
+  uint8_t                 *pTxBuffPtr;    /* Pointer to CEC Tx transfer Buffer */
+  
+  uint16_t                TxXferCount;    /* CEC Tx Transfer Counter */
+  
+  uint8_t                 *pRxBuffPtr;    /* Pointer to CEC Rx transfer Buffer */
+  
+  uint16_t                RxXferSize;     /* CEC Rx Transfer size, 0: header received only */
+  
+  uint32_t                ErrorCode;      /* For errors handling purposes, copy of ISR register 
+                                            in case error is reported */
+  
+  HAL_LockTypeDef         Lock;           /* Locking object */
+  
+  HAL_CEC_StateTypeDef    State;          /* CEC communication state */
+    
+}CEC_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants CEC Exported Constants
+  * @{
+  */
+
+/** @defgroup CEC_Error_Code CEC Error Code
+  * @{
+  */ 
+#define HAL_CEC_ERROR_NONE    (uint32_t) 0x0         /*!< no error                      */
+#define HAL_CEC_ERROR_RXOVR   CEC_ISR_RXOVR          /*!< CEC Rx-Overrun                */
+#define HAL_CEC_ERROR_BRE     CEC_ISR_BRE            /*!< CEC Rx Bit Rising Error       */
+#define HAL_CEC_ERROR_SBPE    CEC_ISR_SBPE           /*!< CEC Rx Short Bit period Error */
+#define HAL_CEC_ERROR_LBPE    CEC_ISR_LBPE           /*!< CEC Rx Long Bit period Error  */
+#define HAL_CEC_ERROR_RXACKE  CEC_ISR_RXACKE         /*!< CEC Rx Missing Acknowledge    */
+#define HAL_CEC_ERROR_ARBLST  CEC_ISR_ARBLST         /*!< CEC Arbitration Lost          */
+#define HAL_CEC_ERROR_TXUDR   CEC_ISR_TXUDR          /*!< CEC Tx-Buffer Underrun        */
+#define HAL_CEC_ERROR_TXERR   CEC_ISR_TXERR          /*!< CEC Tx-Error                  */
+#define HAL_CEC_ERROR_TXACKE  CEC_ISR_TXACKE         /*!< CEC Tx Missing Acknowledge    */
+/**
+  * @}
+  */
+       
+/** @defgroup CEC_Signal_Free_Time  CEC Signal Free Time setting parameter
+  * @{
+  */
+#define CEC_DEFAULT_SFT                    ((uint32_t)0x00000000)
+#define CEC_0_5_BITPERIOD_SFT              ((uint32_t)0x00000001)
+#define CEC_1_5_BITPERIOD_SFT              ((uint32_t)0x00000002)
+#define CEC_2_5_BITPERIOD_SFT              ((uint32_t)0x00000003)
+#define CEC_3_5_BITPERIOD_SFT              ((uint32_t)0x00000004)
+#define CEC_4_5_BITPERIOD_SFT              ((uint32_t)0x00000005)
+#define CEC_5_5_BITPERIOD_SFT              ((uint32_t)0x00000006)
+#define CEC_6_5_BITPERIOD_SFT              ((uint32_t)0x00000007)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Tolerance CEC Receiver Tolerance
+  * @{
+  */
+#define CEC_STANDARD_TOLERANCE             ((uint32_t)0x00000000)
+#define CEC_EXTENDED_TOLERANCE             ((uint32_t)CEC_CFGR_RXTOL)
+/**
+  * @}
+  */ 
+
+/** @defgroup CEC_BRERxStop CEC Reception Stop on Error
+  * @{
+  */
+#define CEC_NO_RX_STOP_ON_BRE             ((uint32_t)0x00000000)
+#define CEC_RX_STOP_ON_BRE                ((uint32_t)CEC_CFGR_BRESTP)
+/**
+  * @}
+  */            
+             
+/** @defgroup CEC_BREErrorBitGen  CEC Error Bit Generation if Bit Rise Error reported
+  * @{
+  */ 
+#define CEC_BRE_ERRORBIT_NO_GENERATION     ((uint32_t)0x00000000)
+#define CEC_BRE_ERRORBIT_GENERATION        ((uint32_t)CEC_CFGR_BREGEN)
+/**
+  * @}
+  */ 
+                        
+/** @defgroup CEC_LBPEErrorBitGen  CEC Error Bit Generation if Long Bit Period Error reported
+  * @{
+  */ 
+#define CEC_LBPE_ERRORBIT_NO_GENERATION     ((uint32_t)0x00000000)
+#define CEC_LBPE_ERRORBIT_GENERATION        ((uint32_t)CEC_CFGR_LBPEGEN)
+/**
+  * @}
+  */    
+
+/** @defgroup CEC_BroadCastMsgErrorBitGen  CEC Error Bit Generation on Broadcast message
+  * @{
+  */ 
+#define CEC_BROADCASTERROR_ERRORBIT_GENERATION     ((uint32_t)0x00000000)
+#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION  ((uint32_t)CEC_CFGR_BRDNOGEN)
+/**
+  * @}
+  */
+  
+/** @defgroup CEC_SFT_Option     CEC Signal Free Time start option
+  * @{
+  */ 
+#define CEC_SFT_START_ON_TXSOM           ((uint32_t)0x00000000)
+#define CEC_SFT_START_ON_TX_RX_END       ((uint32_t)CEC_CFGR_SFTOPT)
+/**
+  * @}
+  */
+  
+/** @defgroup CEC_Listening_Mode    CEC Listening mode option
+  * @{
+  */ 
+#define CEC_REDUCED_LISTENING_MODE          ((uint32_t)0x00000000)
+#define CEC_FULL_LISTENING_MODE             ((uint32_t)CEC_CFGR_LSTN)
+/**
+  * @}
+  */
+  
+/** @defgroup CEC_OAR_Position   CEC Device Own Address position in CEC CFGR register     
+  * @{
+  */
+#define CEC_CFGR_OAR_LSB_POS            ((uint32_t) 16)
+/**
+  * @}
+  */
+  
+/** @defgroup CEC_Initiator_Position   CEC Initiator logical address position in message header     
+  * @{
+  */
+#define CEC_INITIATOR_LSB_POS           ((uint32_t) 4)
+/**
+  * @}
+  */
+  
+/** @defgroup CEC_Interrupts_Definitions  CEC Interrupts definition
+  * @{
+  */
+#define CEC_IT_TXACKE                   CEC_IER_TXACKEIE
+#define CEC_IT_TXERR                    CEC_IER_TXERRIE
+#define CEC_IT_TXUDR                    CEC_IER_TXUDRIE
+#define CEC_IT_TXEND                    CEC_IER_TXENDIE
+#define CEC_IT_TXBR                     CEC_IER_TXBRIE
+#define CEC_IT_ARBLST                   CEC_IER_ARBLSTIE
+#define CEC_IT_RXACKE                   CEC_IER_RXACKEIE
+#define CEC_IT_LBPE                     CEC_IER_LBPEIE
+#define CEC_IT_SBPE                     CEC_IER_SBPEIE
+#define CEC_IT_BRE                      CEC_IER_BREIE
+#define CEC_IT_RXOVR                    CEC_IER_RXOVRIE
+#define CEC_IT_RXEND                    CEC_IER_RXENDIE
+#define CEC_IT_RXBR                     CEC_IER_RXBRIE
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Flags_Definitions  CEC Flags definition
+  * @{
+  */
+#define CEC_FLAG_TXACKE                 CEC_ISR_TXACKE
+#define CEC_FLAG_TXERR                  CEC_ISR_TXERR
+#define CEC_FLAG_TXUDR                  CEC_ISR_TXUDR
+#define CEC_FLAG_TXEND                  CEC_ISR_TXEND
+#define CEC_FLAG_TXBR                   CEC_ISR_TXBR
+#define CEC_FLAG_ARBLST                 CEC_ISR_ARBLST
+#define CEC_FLAG_RXACKE                 CEC_ISR_RXACKE
+#define CEC_FLAG_LBPE                   CEC_ISR_LBPE
+#define CEC_FLAG_SBPE                   CEC_ISR_SBPE
+#define CEC_FLAG_BRE                    CEC_ISR_BRE
+#define CEC_FLAG_RXOVR                  CEC_ISR_RXOVR
+#define CEC_FLAG_RXEND                  CEC_ISR_RXEND
+#define CEC_FLAG_RXBR                   CEC_ISR_RXBR
+/**
+  * @}
+  */
+  
+/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags 
+  * @{
+  */
+#define CEC_ISR_ALL_ERROR              ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
+                                                  CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)
+/**
+  * @}
+  */
+
+/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag 
+  * @{
+  */
+#define CEC_IER_RX_ALL_ERR              ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE)
+/**
+  * @}
+  */
+  
+/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag 
+  * @{
+  */
+#define CEC_IER_TX_ALL_ERR              ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE)
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+  
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros CEC Exported Macros
+  * @{
+  */
+
+/** @brief  Reset CEC handle state
+  * @param  __HANDLE__: CEC handle.
+  * @retval None
+  */
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CEC_STATE_RESET)
+
+/** @brief  Checks whether or not the specified CEC interrupt flag is set.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *            @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+  *            @arg CEC_FLAG_TXERR: Tx Error.
+  *            @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+  *            @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+  *            @arg CEC_FLAG_TXBR: Tx-Byte Request.
+  *            @arg CEC_FLAG_ARBLST: Arbitration Lost
+  *            @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge 
+  *            @arg CEC_FLAG_LBPE: Rx Long period Error
+  *            @arg CEC_FLAG_SBPE: Rx Short period Error
+  *            @arg CEC_FLAG_BRE: Rx Bit Rising Error
+  *            @arg CEC_FLAG_RXOVR: Rx Overrun.
+  *            @arg CEC_FLAG_RXEND: End Of Reception.
+  *            @arg CEC_FLAG_RXBR: Rx-Byte Received.      
+  * @retval ITStatus
+  */
+#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__)        ((__HANDLE__)->Instance->ISR & (__FLAG__)) 
+
+/** @brief  Clears the interrupt or status flag when raised (write at 1)
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __FLAG__: specifies the interrupt/status flag to clear.
+  *        This parameter can be one of the following values:
+  *            @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+  *            @arg CEC_FLAG_TXERR: Tx Error.
+  *            @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+  *            @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+  *            @arg CEC_FLAG_TXBR: Tx-Byte Request.
+  *            @arg CEC_FLAG_ARBLST: Arbitration Lost
+  *            @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge 
+  *            @arg CEC_FLAG_LBPE: Rx Long period Error
+  *            @arg CEC_FLAG_SBPE: Rx Short period Error
+  *            @arg CEC_FLAG_BRE: Rx Bit Rising Error
+  *            @arg CEC_FLAG_RXOVR: Rx Overrun.
+  *            @arg CEC_FLAG_RXEND: End Of Reception.
+  *            @arg CEC_FLAG_RXBR: Rx-Byte Received. 
+  * @retval none  
+  */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__)         ((__HANDLE__)->Instance->ISR |= (__FLAG__)) 
+
+/** @brief  Enables the specified CEC interrupt.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __INTERRUPT__: specifies the CEC interrupt to enable.
+  *          This parameter can be one of the following values:
+  *            @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable 
+  *            @arg CEC_IT_TXERR: Tx Error IT Enable 
+  *            @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable 
+  *            @arg CEC_IT_TXEND: End of transmission IT Enable 
+  *            @arg CEC_IT_TXBR: Tx-Byte Request IT Enable 
+  *            @arg CEC_IT_ARBLST: Arbitration Lost IT Enable 
+  *            @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable 
+  *            @arg CEC_IT_LBPE: Rx Long period Error IT Enable 
+  *            @arg CEC_IT_SBPE: Rx Short period Error IT Enable 
+  *            @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable 
+  *            @arg CEC_IT_RXOVR: Rx Overrun IT Enable 
+  *            @arg CEC_IT_RXEND: End Of Reception IT Enable 
+  *            @arg CEC_IT_RXBR: Rx-Byte Received IT Enable                          
+  * @retval none
+  */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))  
+
+/** @brief  Disables the specified CEC interrupt.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __INTERRUPT__: specifies the CEC interrupt to disable.
+  *          This parameter can be one of the following values:
+  *            @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable 
+  *            @arg CEC_IT_TXERR: Tx Error IT Enable 
+  *            @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable 
+  *            @arg CEC_IT_TXEND: End of transmission IT Enable 
+  *            @arg CEC_IT_TXBR: Tx-Byte Request IT Enable 
+  *            @arg CEC_IT_ARBLST: Arbitration Lost IT Enable 
+  *            @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable 
+  *            @arg CEC_IT_LBPE: Rx Long period Error IT Enable 
+  *            @arg CEC_IT_SBPE: Rx Short period Error IT Enable 
+  *            @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable 
+  *            @arg CEC_IT_RXOVR: Rx Overrun IT Enable 
+  *            @arg CEC_IT_RXEND: End Of Reception IT Enable 
+  *            @arg CEC_IT_RXBR: Rx-Byte Received IT Enable                   
+  * @retval none
+  */   
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))  
+
+/** @brief  Checks whether or not the specified CEC interrupt is enabled.
+  * @param  __HANDLE__: specifies the CEC Handle.
+  * @param  __INTERRUPT__: specifies the CEC interrupt to check.
+  *          This parameter can be one of the following values:
+  *            @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable 
+  *            @arg CEC_IT_TXERR: Tx Error IT Enable 
+  *            @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable 
+  *            @arg CEC_IT_TXEND: End of transmission IT Enable 
+  *            @arg CEC_IT_TXBR: Tx-Byte Request IT Enable 
+  *            @arg CEC_IT_ARBLST: Arbitration Lost IT Enable 
+  *            @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable 
+  *            @arg CEC_IT_LBPE: Rx Long period Error IT Enable 
+  *            @arg CEC_IT_SBPE: Rx Short period Error IT Enable 
+  *            @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable 
+  *            @arg CEC_IT_RXOVR: Rx Overrun IT Enable 
+  *            @arg CEC_IT_RXEND: End Of Reception IT Enable 
+  *            @arg CEC_IT_RXBR: Rx-Byte Received IT Enable                  
+  * @retval FlagStatus  
+  */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+
+/** @brief  Enables the CEC device
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval none 
+  */
+#define __HAL_CEC_ENABLE(__HANDLE__)                   ((__HANDLE__)->Instance->CR |=  CEC_CR_CECEN)
+
+/** @brief  Disables the CEC device
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval none 
+  */
+#define __HAL_CEC_DISABLE(__HANDLE__)                  ((__HANDLE__)->Instance->CR &=  ~CEC_CR_CECEN)
+
+/** @brief  Set Transmission Start flag
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval none 
+  */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__)        ((__HANDLE__)->Instance->CR |=  CEC_CR_TXSOM)
+
+/** @brief  Set Transmission End flag
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval none 
+  * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.  
+  */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__)         ((__HANDLE__)->Instance->CR |=  CEC_CR_TXEOM)
+
+/** @brief  Get Transmission Start flag
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval FlagStatus 
+  */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
+
+/** @brief  Get Transmission End flag
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval FlagStatus 
+  */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__)   ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)   
+
+/** @brief  Clear OAR register
+  * @param  __HANDLE__: specifies the CEC Handle.               
+  * @retval none 
+  */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__)   CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
+
+/** @brief  Set OAR register (without resetting previously set address in case of multi-address mode)
+  *          To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
+  * @param  __HANDLE__: specifies the CEC Handle. 
+  * @param  __ADDRESS__: Own Address value (CEC logical address is identified by bit position)                   
+  * @retval none 
+  */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__)   SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
+
+/**
+  * @}
+  */                       
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CEC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CEC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+/**
+  * @}
+  */
+
+/** @addtogroup CEC_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions  ***************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
+HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData);
+uint32_t HAL_CEC_GetReceivedFrameSize(CEC_HandleTypeDef *hcec);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+/**
+  * @}
+  */
+
+/** @addtogroup CEC_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  ************************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CEC_Private_Types CEC Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Variables CEC Private Variables
+  * @{
+  */
+  
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Macros CEC Private Macros
+  * @{
+  */
+  
+#define IS_CEC_SIGNALFREETIME(__SFT__)     ((__SFT__) <= CEC_CFGR_SFT)  
+
+#define IS_CEC_TOLERANCE(__RXTOL__)        (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \
+                                            ((__RXTOL__) == CEC_EXTENDED_TOLERANCE))
+                                            
+#define IS_CEC_BRERXSTOP(__BRERXSTOP__)   (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \
+                                           ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE))
+                                           
+#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
+                                                ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION))
+
+#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
+                                                 ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION))
+                                                 
+#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
+                                                                       ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+                                                                       
+#define IS_CEC_SFTOP(__SFTOP__)          (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \
+                                          ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END))
+                                          
+#define IS_CEC_LISTENING_MODE(__MODE__)     (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \
+                                             ((__MODE__) == CEC_FULL_LISTENING_MODE))
+                                             
+/** @brief Check CEC device Own Address Register (OAR) setting.
+  *        OAR address is written in a 15-bit field within CEC_CFGR register. 
+  * @param  __ADDRESS__: CEC own address.               
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_CEC_OAR_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x07FFF)  
+
+/** @brief Check CEC initiator or destination logical address setting.
+  *        Initiator and destination addresses are coded over 4 bits. 
+  * @param  __ADDRESS__: CEC initiator or logical address.               
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF)    
+
+/** @brief Check CEC message size.
+  *       The message size is the payload size: without counting the header, 
+  *       it varies from 0 byte (ping operation, one header only, no payload) to 
+  *       15 bytes (1 opcode and up to 14 operands following the header). 
+  * @param  __SIZE__: CEC message size.               
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0xF)  
+                                                
+/**
+  * @}
+  */ 
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+  * @{
+  */
+  
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_cortex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,483 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_cortex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   CORTEX HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the CORTEX:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions 
+  *
+  @verbatim  
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+
+    [..]  
+    *** How to configure Interrupts using CORTEX HAL driver ***
+    ===========================================================
+    [..]     
+    This section provides functions allowing to configure the NVIC interrupts (IRQ).
+    The Cortex-M4 exceptions are managed by CMSIS functions.
+   
+    (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping()
+        function according to the following table.
+    (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority(). 
+    (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ().
+    (#) please refer to programming manual for details in how to configure priority. 
+      
+     -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible. 
+         The pending IRQ priority will be managed only by the sub priority.
+   
+     -@- IRQ priority order (sorted by highest to lowest priority):
+        (+@) Lowest preemption priority
+        (+@) Lowest sub priority
+        (+@) Lowest hardware priority (IRQ number)
+ 
+    [..]  
+    *** How to configure Systick using CORTEX HAL driver ***
+    ========================================================
+    [..]
+    Setup SysTick Timer for time base.
+           
+   (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which
+       is a CMSIS function that:
+        (++) Configures the SysTick Reload register with value passed as function parameter.
+        (++) Configures the SysTick IRQ priority to the lowest value (0x0F).
+        (++) Resets the SysTick Counter register.
+        (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+        (++) Enables the SysTick Interrupt.
+        (++) Starts the SysTick Counter.
+    
+   (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
+       __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
+       HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
+       inside the stm32f7xx_hal_cortex.h file.
+
+   (+) You can change the SysTick IRQ priority by calling the
+       HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function 
+       call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+   (+) To adjust the SysTick time base, use the following formula:
+                            
+       Reload Value = SysTick Counter Clock (Hz) x  Desired Time base (s)
+       (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+       (++) Reload Value should not exceed 0xFFFFFF
+   
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CORTEX CORTEX
+  * @brief CORTEX HAL module driver
+  * @{
+  */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
+  * @{
+  */
+
+
+/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]
+      This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+      Systick functionalities 
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Sets the priority grouping field (preemption priority and subpriority)
+  *         using the required unlock sequence.
+  * @param  PriorityGroup: The priority grouping bits length. 
+  *         This parameter can be one of the following values:
+  *         @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+  *                                    4 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+  *                                    3 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+  *                                    2 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+  *                                    1 bits for subpriority
+  *         @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+  *                                    0 bits for subpriority
+  * @note   When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible. 
+  *         The pending IRQ priority will be managed only by the subpriority. 
+  * @retval None
+  */
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+  
+  /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
+  NVIC_SetPriorityGrouping(PriorityGroup);
+}
+
+/**
+  * @brief  Sets the priority of an interrupt.
+  * @param  IRQn: External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+  * @param  PreemptPriority: The preemption priority for the IRQn channel.
+  *         This parameter can be a value between 0 and 15
+  *         A lower priority value indicates a higher priority 
+  * @param  SubPriority: the subpriority level for the IRQ channel.
+  *         This parameter can be a value between 0 and 15
+  *         A lower priority value indicates a higher priority.          
+  * @retval None
+  */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{ 
+  uint32_t prioritygroup = 0x00;
+  
+  /* Check the parameters */
+  assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
+  assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+  
+  prioritygroup = NVIC_GetPriorityGrouping();
+  
+  NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
+}
+
+/**
+  * @brief  Enables a device specific interrupt in the NVIC interrupt controller.
+  * @note   To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+  *         function should be called before. 
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Enable interrupt */
+  NVIC_EnableIRQ(IRQn);
+}
+
+/**
+  * @brief  Disables a device specific interrupt in the NVIC interrupt controller.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Disable interrupt */
+  NVIC_DisableIRQ(IRQn);
+}
+
+/**
+  * @brief  Initiates a system reset request to reset the MCU.
+  * @retval None
+  */
+void HAL_NVIC_SystemReset(void)
+{
+  /* System Reset */
+  NVIC_SystemReset();
+}
+
+/**
+  * @brief  Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+  *         Counter is in free running mode to generate periodic interrupts.
+  * @param  TicksNumb: Specifies the ticks Number of ticks between two interrupts.
+  * @retval status:  - 0  Function succeeded.
+  *                  - 1  Function failed.
+  */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+   return SysTick_Config(TicksNumb);
+}
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ *  @brief   Cortex control functions 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### Peripheral Control functions #####
+  ==============================================================================  
+    [..]
+      This subsection provides a set of functions allowing to control the CORTEX
+      (NVIC, SYSTICK, MPU) functionalities. 
+ 
+      
+@endverbatim
+  * @{
+  */
+
+#if (__MPU_PRESENT == 1)
+/**
+  * @brief  Initializes and configures the Region and the memory to be protected.
+  * @param  MPU_Init: Pointer to a MPU_Region_InitTypeDef structure that contains
+  *                the initialization and configuration information.
+  * @retval None
+  */
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init)
+{
+  /* Check the parameters */
+  assert_param(IS_MPU_REGION_NUMBER(MPU_Init->Number));
+  assert_param(IS_MPU_REGION_ENABLE(MPU_Init->Enable));
+
+  /* Set the Region number */
+  MPU->RNR = MPU_Init->Number;
+
+  if ((MPU_Init->Enable) != RESET)
+  {
+    /* Check the parameters */
+    assert_param(IS_MPU_INSTRUCTION_ACCESS(MPU_Init->DisableExec));
+    assert_param(IS_MPU_REGION_PERMISSION_ATTRIBUTE(MPU_Init->AccessPermission));
+    assert_param(IS_MPU_TEX_LEVEL(MPU_Init->TypeExtField));
+    assert_param(IS_MPU_ACCESS_SHAREABLE(MPU_Init->IsShareable));
+    assert_param(IS_MPU_ACCESS_CACHEABLE(MPU_Init->IsCacheable));
+    assert_param(IS_MPU_ACCESS_BUFFERABLE(MPU_Init->IsBufferable));
+    assert_param(IS_MPU_SUB_REGION_DISABLE(MPU_Init->SubRegionDisable));
+    assert_param(IS_MPU_REGION_SIZE(MPU_Init->Size));
+    
+    MPU->RBAR = MPU_Init->BaseAddress;
+    MPU->RASR = ((uint32_t)MPU_Init->DisableExec             << MPU_RASR_XN_Pos)   |
+                ((uint32_t)MPU_Init->AccessPermission        << MPU_RASR_AP_Pos)   |
+                ((uint32_t)MPU_Init->TypeExtField            << MPU_RASR_TEX_Pos)  |
+                ((uint32_t)MPU_Init->IsShareable             << MPU_RASR_S_Pos)    |
+                ((uint32_t)MPU_Init->IsCacheable             << MPU_RASR_C_Pos)    |
+                ((uint32_t)MPU_Init->IsBufferable            << MPU_RASR_B_Pos)    |
+                ((uint32_t)MPU_Init->SubRegionDisable        << MPU_RASR_SRD_Pos)  |
+                ((uint32_t)MPU_Init->Size                    << MPU_RASR_SIZE_Pos) |
+                ((uint32_t)MPU_Init->Enable                  << MPU_RASR_ENABLE_Pos);
+  }
+  else
+  {
+    MPU->RBAR = 0x00;
+    MPU->RASR = 0x00;
+  }
+}
+#endif /* __MPU_PRESENT */
+
+/**
+  * @brief  Gets the priority grouping field from the NVIC Interrupt Controller.
+  * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
+  */
+uint32_t HAL_NVIC_GetPriorityGrouping(void)
+{
+  /* Get the PRIGROUP[10:8] field value */
+  return NVIC_GetPriorityGrouping();
+}
+
+/**
+  * @brief  Gets the priority of an interrupt.
+  * @param  IRQn: External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+  * @param   PriorityGroup: the priority grouping bits length.
+  *         This parameter can be one of the following values:
+  *           @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
+  *                                      4 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
+  *                                      3 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
+  *                                      2 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
+  *                                      1 bits for subpriority
+  *           @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
+  *                                      0 bits for subpriority
+  * @param  pPreemptPriority: Pointer on the Preemptive priority value (starting from 0).
+  * @param  pSubPriority: Pointer on the Subpriority value (starting from 0).
+  * @retval None
+  */
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
+ /* Get priority for Cortex-M system or device specific interrupts */
+  NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
+}
+
+/**
+  * @brief  Sets Pending bit of an external interrupt.
+  * @param  IRQn External interrupt number
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Set interrupt pending */
+  NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Gets Pending Interrupt (reads the pending register in the NVIC 
+  *         and returns the pending bit for the specified interrupt).
+  * @param  IRQn External interrupt number.
+  *          This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+  * @retval status: - 0  Interrupt status is not pending.
+  *                 - 1  Interrupt status is pending.
+  */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Return 1 if pending else 0 */
+  return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Clears the pending bit of an external interrupt.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Clear pending interrupt */
+  NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+  * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
+  * @param IRQn External interrupt number
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f7xxxx.h))
+  * @retval status: - 0  Interrupt status is not pending.
+  *                 - 1  Interrupt status is pending.
+  */
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Return 1 if active else 0 */
+  return NVIC_GetActive(IRQn);
+}
+
+/**
+  * @brief  Configures the SysTick clock source.
+  * @param  CLKSource: specifies the SysTick clock source.
+  *          This parameter can be one of the following values:
+  *             @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+  *             @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+  * @retval None
+  */
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
+  if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
+  {
+    SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+  }
+  else
+  {
+    SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
+  }
+}
+
+/**
+  * @brief  This function handles SYSTICK interrupt request.
+  * @retval None
+  */
+void HAL_SYSTICK_IRQHandler(void)
+{
+  HAL_SYSTICK_Callback();
+}
+
+/**
+  * @brief  SYSTICK callback.
+  * @retval None
+  */
+__weak void HAL_SYSTICK_Callback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SYSTICK_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_cortex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,467 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_cortex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of CORTEX HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CORTEX_H
+#define __STM32F7xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CORTEX
+  * @{
+  */ 
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Types Cortex Exported Types
+  * @{
+  */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_Region_Initialization_Structure_definition MPU Region Initialization Structure Definition
+  * @brief  MPU Region initialization structure 
+  * @{
+  */
+typedef struct
+{
+  uint8_t                Enable;                /*!< Specifies the status of the region. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Enable                 */
+  uint8_t                Number;                /*!< Specifies the number of the region to protect. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Number                 */
+  uint32_t               BaseAddress;           /*!< Specifies the base address of the region to protect.                           */
+  uint8_t                Size;                  /*!< Specifies the size of the region to protect. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Size                   */
+  uint8_t                SubRegionDisable;      /*!< Specifies the number of the subregion protection to disable. 
+                                                     This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF    */         
+  uint8_t                TypeExtField;          /*!< Specifies the TEX field level.
+                                                     This parameter can be a value of @ref CORTEX_MPU_TEX_Levels                    */                 
+  uint8_t                AccessPermission;      /*!< Specifies the region access permission type. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Region_Permission_Attributes  */
+  uint8_t                DisableExec;           /*!< Specifies the instruction access status. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Instruction_Access            */
+  uint8_t                IsShareable;           /*!< Specifies the shareability status of the protected region. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Shareable              */
+  uint8_t                IsCacheable;           /*!< Specifies the cacheable status of the region protected. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Cacheable              */
+  uint8_t                IsBufferable;          /*!< Specifies the bufferable status of the protected region. 
+                                                     This parameter can be a value of @ref CORTEX_MPU_Access_Bufferable             */
+}MPU_Region_InitTypeDef;
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+  * @{
+  */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+  * @{
+  */
+#define NVIC_PRIORITYGROUP_0         ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority
+                                                                 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1         ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority
+                                                                 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2         ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority
+                                                                 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3         ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority
+                                                                 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4         ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority
+                                                                 0 bits for subpriority */
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source 
+  * @{
+  */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8    ((uint32_t)0x00000000)
+#define SYSTICK_CLKSOURCE_HCLK         ((uint32_t)0x00000004)
+
+/**
+  * @}
+  */
+
+#if (__MPU_PRESENT == 1)
+/** @defgroup CORTEX_MPU_HFNMI_PRIVDEF_Control MPU HFNMI and PRIVILEGED Access control
+  * @{
+  */
+#define  MPU_HFNMI_PRIVDEF_NONE      ((uint32_t)0x00000000)  
+#define  MPU_HARDFAULT_NMI           ((uint32_t)0x00000002)
+#define  MPU_PRIVILEGED_DEFAULT      ((uint32_t)0x00000004)
+#define  MPU_HFNMI_PRIVDEF           ((uint32_t)0x00000006)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Enable CORTEX MPU Region Enable
+  * @{
+  */
+#define  MPU_REGION_ENABLE     ((uint8_t)0x01)
+#define  MPU_REGION_DISABLE    ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Instruction_Access CORTEX MPU Instruction Access
+  * @{
+  */
+#define  MPU_INSTRUCTION_ACCESS_ENABLE      ((uint8_t)0x00)
+#define  MPU_INSTRUCTION_ACCESS_DISABLE     ((uint8_t)0x01)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Shareable CORTEX MPU Instruction Access Shareable
+  * @{
+  */
+#define  MPU_ACCESS_SHAREABLE        ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_SHAREABLE    ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Cacheable CORTEX MPU Instruction Access Cacheable
+  * @{
+  */
+#define  MPU_ACCESS_CACHEABLE         ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_CACHEABLE     ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Access_Bufferable CORTEX MPU Instruction Access Bufferable
+  * @{
+  */
+#define  MPU_ACCESS_BUFFERABLE         ((uint8_t)0x01)
+#define  MPU_ACCESS_NOT_BUFFERABLE     ((uint8_t)0x00)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_TEX_Levels MPU TEX Levels
+  * @{
+  */
+#define  MPU_TEX_LEVEL0    ((uint8_t)0x00)
+#define  MPU_TEX_LEVEL1    ((uint8_t)0x01)
+#define  MPU_TEX_LEVEL2    ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Size CORTEX MPU Region Size
+  * @{
+  */
+#define   MPU_REGION_SIZE_32B      ((uint8_t)0x04)
+#define   MPU_REGION_SIZE_64B      ((uint8_t)0x05)
+#define   MPU_REGION_SIZE_128B     ((uint8_t)0x06) 
+#define   MPU_REGION_SIZE_256B     ((uint8_t)0x07) 
+#define   MPU_REGION_SIZE_512B     ((uint8_t)0x08) 
+#define   MPU_REGION_SIZE_1KB      ((uint8_t)0x09)  
+#define   MPU_REGION_SIZE_2KB      ((uint8_t)0x0A)
+#define   MPU_REGION_SIZE_4KB      ((uint8_t)0x0B) 
+#define   MPU_REGION_SIZE_8KB      ((uint8_t)0x0C) 
+#define   MPU_REGION_SIZE_16KB     ((uint8_t)0x0D) 
+#define   MPU_REGION_SIZE_32KB     ((uint8_t)0x0E) 
+#define   MPU_REGION_SIZE_64KB     ((uint8_t)0x0F) 
+#define   MPU_REGION_SIZE_128KB    ((uint8_t)0x10)
+#define   MPU_REGION_SIZE_256KB    ((uint8_t)0x11)
+#define   MPU_REGION_SIZE_512KB    ((uint8_t)0x12)
+#define   MPU_REGION_SIZE_1MB      ((uint8_t)0x13) 
+#define   MPU_REGION_SIZE_2MB      ((uint8_t)0x14) 
+#define   MPU_REGION_SIZE_4MB      ((uint8_t)0x15) 
+#define   MPU_REGION_SIZE_8MB      ((uint8_t)0x16) 
+#define   MPU_REGION_SIZE_16MB     ((uint8_t)0x17)
+#define   MPU_REGION_SIZE_32MB     ((uint8_t)0x18)
+#define   MPU_REGION_SIZE_64MB     ((uint8_t)0x19)
+#define   MPU_REGION_SIZE_128MB    ((uint8_t)0x1A)
+#define   MPU_REGION_SIZE_256MB    ((uint8_t)0x1B)
+#define   MPU_REGION_SIZE_512MB    ((uint8_t)0x1C)
+#define   MPU_REGION_SIZE_1GB      ((uint8_t)0x1D) 
+#define   MPU_REGION_SIZE_2GB      ((uint8_t)0x1E) 
+#define   MPU_REGION_SIZE_4GB      ((uint8_t)0x1F)
+/**                                
+  * @}
+  */
+   
+/** @defgroup CORTEX_MPU_Region_Permission_Attributes CORTEX MPU Region Permission Attributes 
+  * @{
+  */
+#define  MPU_REGION_NO_ACCESS      ((uint8_t)0x00)  
+#define  MPU_REGION_PRIV_RW        ((uint8_t)0x01) 
+#define  MPU_REGION_PRIV_RW_URO    ((uint8_t)0x02)  
+#define  MPU_REGION_FULL_ACCESS    ((uint8_t)0x03)  
+#define  MPU_REGION_PRIV_RO        ((uint8_t)0x05) 
+#define  MPU_REGION_PRIV_RO_URO    ((uint8_t)0x06)
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_MPU_Region_Number CORTEX MPU Region Number
+  * @{
+  */
+#define  MPU_REGION_NUMBER0    ((uint8_t)0x00)  
+#define  MPU_REGION_NUMBER1    ((uint8_t)0x01) 
+#define  MPU_REGION_NUMBER2    ((uint8_t)0x02)  
+#define  MPU_REGION_NUMBER3    ((uint8_t)0x03)  
+#define  MPU_REGION_NUMBER4    ((uint8_t)0x04) 
+#define  MPU_REGION_NUMBER5    ((uint8_t)0x05)
+#define  MPU_REGION_NUMBER6    ((uint8_t)0x06)
+#define  MPU_REGION_NUMBER7    ((uint8_t)0x07)
+/**
+  * @}
+  */
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+  * @{
+  */
+  
+/** @addtogroup CORTEX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+  * @}
+  */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+#if (__MPU_PRESENT == 1)
+void HAL_MPU_ConfigRegion(MPU_Region_InitTypeDef *MPU_Init);
+#endif /* __MPU_PRESENT */
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/ 
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+  * @{
+  */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+                                       ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY)         ((PRIORITY) < 0x10)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ)                ((IRQ) >= 0x00)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+                                       ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+
+#if (__MPU_PRESENT == 1)
+#define IS_MPU_REGION_ENABLE(STATE) (((STATE) == MPU_REGION_ENABLE) || \
+                                     ((STATE) == MPU_REGION_DISABLE))
+
+#define IS_MPU_INSTRUCTION_ACCESS(STATE) (((STATE) == MPU_INSTRUCTION_ACCESS_ENABLE) || \
+                                          ((STATE) == MPU_INSTRUCTION_ACCESS_DISABLE))
+
+#define IS_MPU_ACCESS_SHAREABLE(STATE)   (((STATE) == MPU_ACCESS_SHAREABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_SHAREABLE))
+
+#define IS_MPU_ACCESS_CACHEABLE(STATE)   (((STATE) == MPU_ACCESS_CACHEABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_CACHEABLE))
+
+#define IS_MPU_ACCESS_BUFFERABLE(STATE)   (((STATE) == MPU_ACCESS_BUFFERABLE) || \
+                                          ((STATE) == MPU_ACCESS_NOT_BUFFERABLE))
+
+#define IS_MPU_TEX_LEVEL(TYPE) (((TYPE) == MPU_TEX_LEVEL0)  || \
+                                ((TYPE) == MPU_TEX_LEVEL1)  || \
+                                ((TYPE) == MPU_TEX_LEVEL2))
+
+#define IS_MPU_REGION_PERMISSION_ATTRIBUTE(TYPE) (((TYPE) == MPU_REGION_NO_ACCESS)   || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RW)     || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RW_URO) || \
+                                                  ((TYPE) == MPU_REGION_FULL_ACCESS) || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RO)     || \
+                                                  ((TYPE) == MPU_REGION_PRIV_RO_URO))
+
+#define IS_MPU_REGION_NUMBER(NUMBER)    (((NUMBER) == MPU_REGION_NUMBER0) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER1) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER2) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER3) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER4) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER5) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER6) || \
+                                         ((NUMBER) == MPU_REGION_NUMBER7))
+
+#define IS_MPU_REGION_SIZE(SIZE)    (((SIZE) == MPU_REGION_SIZE_32B)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_64B)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_128B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_256B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_512B)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_1KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_8KB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_16KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_32KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_64KB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_128KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_256KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_512KB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_1MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_8MB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_16MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_32MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_64MB)  || \
+                                     ((SIZE) == MPU_REGION_SIZE_128MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_256MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_512MB) || \
+                                     ((SIZE) == MPU_REGION_SIZE_1GB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_2GB)   || \
+                                     ((SIZE) == MPU_REGION_SIZE_4GB))
+
+#define IS_MPU_SUB_REGION_DISABLE(SUBREGION)  ((SUBREGION) < (uint16_t)0x00FF)
+#endif /* __MPU_PRESENT */
+
+/**                                                                          
+  * @}                                                                  
+  */                                                                            
+                                                                                   
+/* Private functions ---------------------------------------------------------*/   
+/** @defgroup CORTEX_Private_Functions CORTEX Private Functions
+  * @brief    CORTEX private  functions 
+  * @{
+  */
+
+#if (__MPU_PRESENT == 1)
+/**
+  * @brief  Disables the MPU
+  * @retval None
+  */
+__STATIC_INLINE void HAL_MPU_Disable(void)
+{
+  /* Disable fault exceptions */
+  SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
+  
+  /* Disable the MPU */
+  MPU->CTRL  &= ~MPU_CTRL_ENABLE_Msk;
+}
+
+/**
+  * @brief  Enables the MPU
+  * @param  MPU_Control: Specifies the control mode of the MPU during hard fault, 
+  *          NMI, FAULTMASK and privileged access to the default memory 
+  *          This parameter can be one of the following values:
+  *            @arg MPU_HFNMI_PRIVDEF_NONE
+  *            @arg MPU_HARDFAULT_NMI
+  *            @arg MPU_PRIVILEGED_DEFAULT
+  *            @arg MPU_HFNMI_PRIVDEF
+  * @retval None
+  */
+__STATIC_INLINE void HAL_MPU_Enable(uint32_t MPU_Control)
+{
+  /* Enable the MPU */
+  MPU->CTRL   = MPU_Control | MPU_CTRL_ENABLE_Msk;
+  
+  /* Enable fault exceptions */
+  SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
+}
+#endif /* __MPU_PRESENT */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CORTEX_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_crc.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,522 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_crc.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   CRC HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Cyclic Redundancy Check (CRC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State functions
+  *
+  @verbatim
+ ===============================================================================
+                     ##### CRC How to use this driver #####
+ ===============================================================================
+    [..]
+
+    (#) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE();
+
+    (#) Initialize CRC calculator
+         (++) specify generating polynomial (IP default or non-default one)
+         (++) specify initialization value (IP default or non-default one)
+         (++) specify input data format
+         (++) specify input or output data inversion mode if any
+
+    (#) Use HAL_CRC_Accumulate() function to compute the CRC value of the 
+        input data buffer starting with the previously computed CRC as 
+        initialization value
+
+    (#) Use HAL_CRC_Calculate() function to compute the CRC value of the 
+        input data buffer starting with the defined initialization value 
+        (default or non-default) to initiate CRC calculation
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CRC CRC
+  * @brief CRC HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength);
+static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength);
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup CRC_Exported_Functions CRC Exported Functions
+  * @{
+  */
+
+/** @defgroup HAL_CRC_Group1 Initialization/de-initialization functions 
+  *  @brief    Initialization and Configuration functions. 
+  *
+@verbatim    
+ ===============================================================================
+            ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the CRC according to the specified parameters 
+          in the CRC_InitTypeDef and create the associated handle
+      (+) DeInitialize the CRC peripheral
+      (+) Initialize the CRC MSP
+      (+) DeInitialize CRC MSP 
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initialize the CRC according to the specified
+  *         parameters in the CRC_InitTypeDef and create the associated handle.
+  * @param  hcrc: CRC handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc)
+{
+  /* Check the CRC handle allocation */
+  if(hcrc == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
+
+  if(hcrc->State == HAL_CRC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hcrc->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_CRC_MspInit(hcrc);
+  }
+  
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_BUSY;
+  
+  /* check whether or not non-default generating polynomial has been 
+   * picked up by user */
+  assert_param(IS_DEFAULT_POLYNOMIAL(hcrc->Init.DefaultPolynomialUse)); 
+  if(hcrc->Init.DefaultPolynomialUse == DEFAULT_POLYNOMIAL_ENABLE)
+  {
+    /* initialize IP with default generating polynomial */
+    WRITE_REG(hcrc->Instance->POL, DEFAULT_CRC32_POLY);  
+    MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, CRC_POLYLENGTH_32B);
+  }
+  else
+  {
+    /* initialize CRC IP with generating polynomial defined by user */
+    if(HAL_CRCEx_Polynomial_Set(hcrc, hcrc->Init.GeneratingPolynomial, hcrc->Init.CRCLength) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+  }
+  
+  /* check whether or not non-default CRC initial value has been 
+   * picked up by user */
+  assert_param(IS_DEFAULT_INIT_VALUE(hcrc->Init.DefaultInitValueUse));
+  if(hcrc->Init.DefaultInitValueUse == DEFAULT_INIT_VALUE_ENABLE)
+  {
+    WRITE_REG(hcrc->Instance->INIT, DEFAULT_CRC_INITVALUE);  
+  }
+  else
+  {
+    WRITE_REG(hcrc->Instance->INIT, hcrc->Init.InitValue);
+  }
+  
+
+  /* set input data inversion mode */
+  assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(hcrc->Init.InputDataInversionMode)); 
+  MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, hcrc->Init.InputDataInversionMode); 
+  
+  /* set output data inversion mode */
+  assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(hcrc->Init.OutputDataInversionMode)); 
+  MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, hcrc->Init.OutputDataInversionMode);  
+  
+  /* makes sure the input data format (bytes, halfwords or words stream)
+   * is properly specified by user */
+  assert_param(IS_CRC_INPUTDATA_FORMAT(hcrc->InputDataFormat));
+
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitialize the CRC peripheral.
+  * @param  hcrc: CRC handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc)
+{
+  /* Check the CRC handle allocation */
+  if(hcrc == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
+  
+  /* Check the CRC peripheral state */
+  if(hcrc->State == HAL_CRC_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_BUSY;
+  
+  /* Reset CRC calculation unit */
+  __HAL_CRC_DR_RESET(hcrc);
+
+  /* DeInit the low level hardware */
+  HAL_CRC_MspDeInit(hcrc);
+
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_RESET;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hcrc);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the CRC MSP.
+  * @param  hcrc: CRC handle
+  * @retval None
+  */
+__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcrc);
+  
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_CRC_MspInit can be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitialize the CRC MSP.
+  * @param  hcrc: CRC handle
+  * @retval None
+  */
+__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcrc);
+  
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_CRC_MspDeInit can be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CRC_Group2 Peripheral Control functions 
+  *  @brief   Peripheral Control functions 
+  *
+@verbatim  
+ ==============================================================================
+                      ##### Peripheral Control functions #####
+ ==============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer
+          using combination of the previous CRC value and the new one.
+          
+          or
+          
+      (+) Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer
+          independently of the previous CRC value.
+
+@endverbatim
+  * @{
+  */
+
+/**                  
+  * @brief  Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer
+  *         starting with the previously computed CRC as initialization value.
+  * @param  hcrc: CRC handle
+  * @param  pBuffer: pointer to the input data buffer, exact input data format is
+  *         provided by hcrc->InputDataFormat.  
+  * @param  BufferLength: input data buffer length (number of bytes if pBuffer
+  *         type is * uint8_t, number of half-words if pBuffer type is * uint16_t,
+  *         number of words if pBuffer type is * uint32_t).
+  * @note  By default, the API expects a uint32_t pointer as input buffer parameter.
+  *        Input buffer pointers with other types simply need to be cast in uint32_t
+  *        and the API will internally adjust its input data processing based on the  
+  *        handle field hcrc->InputDataFormat.  
+  * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
+  */
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
+{
+  uint32_t index = 0; /* CRC input data buffer index */
+  uint32_t temp = 0;  /* CRC output (read from hcrc->Instance->DR register) */
+  
+  /* Process locked */
+  __HAL_LOCK(hcrc); 
+    
+  /* Change CRC peripheral state */  
+  hcrc->State = HAL_CRC_STATE_BUSY;
+  
+  switch (hcrc->InputDataFormat)
+  {
+    case CRC_INPUTDATA_FORMAT_WORDS:  
+      /* Enter Data to the CRC calculator */
+      for(index = 0; index < BufferLength; index++)
+      {
+        hcrc->Instance->DR = pBuffer[index];
+      }
+      temp = hcrc->Instance->DR;
+      break;
+      
+    case CRC_INPUTDATA_FORMAT_BYTES: 
+      temp = CRC_Handle_8(hcrc, (uint8_t*)pBuffer, BufferLength);
+      break;
+      
+    case CRC_INPUTDATA_FORMAT_HALFWORDS: 
+      temp = CRC_Handle_16(hcrc, (uint16_t*)pBuffer, BufferLength);
+      break;
+    default:
+      break;  
+  }
+  
+  /* Change CRC peripheral state */    
+  hcrc->State = HAL_CRC_STATE_READY; 
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hcrc);
+  
+  /* Return the CRC computed value */ 
+  return temp;
+}
+
+/**                  
+  * @brief  Compute the 7, 8, 16 or 32-bit CRC value of an 8, 16 or 32-bit data buffer
+  *         starting with hcrc->Instance->INIT as initialization value.
+  * @param  hcrc: CRC handle
+  * @param  pBuffer: pointer to the input data buffer, exact input data format is
+  *         provided by hcrc->InputDataFormat.  
+  * @param  BufferLength: input data buffer length (number of bytes if pBuffer
+  *         type is * uint8_t, number of half-words if pBuffer type is * uint16_t,
+  *         number of words if pBuffer type is * uint32_t).
+  * @note  By default, the API expects a uint32_t pointer as input buffer parameter.
+  *        Input buffer pointers with other types simply need to be cast in uint32_t
+  *        and the API will internally adjust its input data processing based on the  
+  *        handle field hcrc->InputDataFormat.   
+  * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
+  */  
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
+{
+  uint32_t index = 0; /* CRC input data buffer index */
+  uint32_t temp = 0;  /* CRC output (read from hcrc->Instance->DR register) */
+    
+  /* Process locked */
+  __HAL_LOCK(hcrc); 
+  
+  /* Change CRC peripheral state */  
+  hcrc->State = HAL_CRC_STATE_BUSY;
+  
+  /* Reset CRC Calculation Unit (hcrc->Instance->INIT is 
+  *  written in hcrc->Instance->DR) */
+  __HAL_CRC_DR_RESET(hcrc);
+  
+  switch (hcrc->InputDataFormat)
+  {
+    case CRC_INPUTDATA_FORMAT_WORDS:  
+      /* Enter 32-bit input data to the CRC calculator */
+      for(index = 0; index < BufferLength; index++)
+      {
+        hcrc->Instance->DR = pBuffer[index];
+      }
+      temp = hcrc->Instance->DR;
+      break;
+      
+    case CRC_INPUTDATA_FORMAT_BYTES: 
+      /* Specific 8-bit input data handling  */
+      temp = CRC_Handle_8(hcrc, (uint8_t*)pBuffer, BufferLength);
+      break;
+      
+    case CRC_INPUTDATA_FORMAT_HALFWORDS: 
+      /* Specific 16-bit input data handling  */
+      temp = CRC_Handle_16(hcrc, (uint16_t*)pBuffer, BufferLength);
+      break;
+    default:
+      break;
+  }
+
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hcrc);
+  
+  /* Return the CRC computed value */ 
+  return temp;
+}
+
+/**             
+  * @brief  Enter 8-bit input data to the CRC calculator.
+  *         Specific data handling to optimize processing time.  
+  * @param  hcrc: CRC handle
+  * @param  pBuffer: pointer to the input data buffer
+  * @param  BufferLength: input data buffer length
+  * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
+  */
+static uint32_t CRC_Handle_8(CRC_HandleTypeDef *hcrc, uint8_t pBuffer[], uint32_t BufferLength)
+{
+  uint32_t i = 0; /* input data buffer index */
+  
+   /* Processing time optimization: 4 bytes are entered in a row with a single word write,
+    * last bytes must be carefully fed to the CRC calculator to ensure a correct type
+    * handling by the IP */
+   for(i = 0; i < (BufferLength/4); i++)
+   {
+     hcrc->Instance->DR = (uint32_t)(((uint32_t)(pBuffer[4*i])<<24) | ((uint32_t)(pBuffer[4*i+1])<<16) | ((uint32_t)(pBuffer[4*i+2])<<8) | (uint32_t)(pBuffer[4*i+3]));
+   }
+   /* last bytes specific handling */
+   if((BufferLength%4) != 0)
+   {
+     if(BufferLength%4 == 1)
+     {
+       *(__IO uint8_t*) (&hcrc->Instance->DR) = pBuffer[4*i];
+     }
+     if(BufferLength%4 == 2)
+     {
+       *(__IO uint16_t*) (&hcrc->Instance->DR) = (uint16_t)(((uint16_t)(pBuffer[4*i])<<8) | (uint16_t)(pBuffer[4*i+1]));
+     }
+     if(BufferLength%4 == 3)
+     {
+       *(__IO uint16_t*) (&hcrc->Instance->DR) = (uint16_t)(((uint16_t)(pBuffer[4*i])<<8) | (uint16_t)(pBuffer[4*i+1]));
+       *(__IO uint8_t*) (&hcrc->Instance->DR) = pBuffer[4*i+2];       
+     }
+   }
+  
+  /* Return the CRC computed value */ 
+  return hcrc->Instance->DR;
+}
+
+/**             
+  * @brief  Enter 16-bit input data to the CRC calculator.
+  *         Specific data handling to optimize processing time.  
+  * @param  hcrc: CRC handle
+  * @param  pBuffer: pointer to the input data buffer
+  * @param  BufferLength: input data buffer length
+  * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
+  */  
+static uint32_t CRC_Handle_16(CRC_HandleTypeDef *hcrc, uint16_t pBuffer[], uint32_t BufferLength)
+{
+  uint32_t i = 0;  /* input data buffer index */
+  
+  /* Processing time optimization: 2 HalfWords are entered in a row with a single word write,
+   * in case of odd length, last HalfWord must be carefully fed to the CRC calculator to ensure 
+   * a correct type handling by the IP */
+  for(i = 0; i < (BufferLength/2); i++)
+  {
+    hcrc->Instance->DR = (((uint32_t)(pBuffer[2*i])<<16) | (uint32_t)(pBuffer[2*i+1]));
+  }
+  if((BufferLength%2) != 0)
+  {
+     *(__IO uint16_t*) (&hcrc->Instance->DR) = pBuffer[2*i]; 
+  }
+   
+  /* Return the CRC computed value */ 
+  return hcrc->Instance->DR;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_CRC_Group3 Peripheral State functions 
+  *  @brief    Peripheral State functions. 
+  *
+@verbatim   
+ ==============================================================================
+                      ##### Peripheral State functions #####
+ ==============================================================================  
+    [..]
+    This subsection permits to get in run-time the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the CRC state.
+  * @param  hcrc: CRC handle
+  * @retval HAL state
+  */
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc)
+{
+  return hcrc->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_CRC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_crc.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,423 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_crc.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of CRC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CRC_H
+#define __STM32F7xx_HAL_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CRC CRC
+  * @brief CRC HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Types CRC Exported Types
+  * @{
+  */
+
+/** @defgroup CRC_Exported_Types_Group1 CRC State Structure definition 
+  * @{
+  */
+typedef enum
+{
+  HAL_CRC_STATE_RESET     = 0x00,  /*!< CRC not yet initialized or disabled */
+  HAL_CRC_STATE_READY     = 0x01,  /*!< CRC initialized and ready for use   */
+  HAL_CRC_STATE_BUSY      = 0x02,  /*!< CRC internal process is ongoing     */
+  HAL_CRC_STATE_TIMEOUT   = 0x03,  /*!< CRC timeout state                   */
+  HAL_CRC_STATE_ERROR     = 0x04   /*!< CRC error state                     */
+}HAL_CRC_StateTypeDef;
+/** 
+  * @}
+  */
+
+/** @defgroup CRC_Exported_Types_Group2 CRC Init Structure definition  
+  * @{
+  */
+typedef struct
+{
+  uint8_t DefaultPolynomialUse;       /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.  
+                                            If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default 
+                                            X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1. 
+                                            In that case, there is no need to set GeneratingPolynomial field.
+                                            If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set */
+
+  uint8_t DefaultInitValueUse;        /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used. 
+                                           If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
+                                           0xFFFFFFFF value. In that case, there is no need to set InitValue field.   
+                                           If otherwise set to DEFAULT_INIT_VALUE_DISABLE,  InitValue field must be set */
+
+  uint32_t GeneratingPolynomial;      /*!< Set CRC generating polynomial. 7, 8, 16 or 32-bit long value for a polynomial degree
+                                           respectively equal to 7, 8, 16 or 32. This field is written in normal representation, 
+                                           e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
+                                           No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE   */                                                
+
+  uint32_t CRCLength;                 /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length.
+                                           Value can be either one of
+                                           CRC_POLYLENGTH_32B                  (32-bit CRC)
+                                           CRC_POLYLENGTH_16B                  (16-bit CRC)
+                                           CRC_POLYLENGTH_8B                   (8-bit CRC)
+                                           CRC_POLYLENGTH_7B                   (7-bit CRC) */
+                                              
+  uint32_t InitValue;                 /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse 
+                                           is set to DEFAULT_INIT_VALUE_ENABLE   */                                                
+  
+  uint32_t InputDataInversionMode;    /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode. 
+                                           Can be either one of the following values 
+                                           CRC_INPUTDATA_INVERSION_NONE      no input data inversion
+                                           CRC_INPUTDATA_INVERSION_BYTE      byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2
+                                           CRC_INPUTDATA_INVERSION_HALFWORD  halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C
+                                           CRC_INPUTDATA_INVERSION_WORD      word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */  
+                                              
+  uint32_t OutputDataInversionMode;   /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
+                                            Can be either 
+                                            CRC_OUTPUTDATA_INVERSION_DISABLE   no CRC inversion, or
+                                            CRC_OUTPUTDATA_INVERSION_ENABLE    CRC 0x11223344 is converted into 0x22CC4488 */
+}CRC_InitTypeDef;
+/** 
+  * @}
+  */
+  
+/** @defgroup CRC_Exported_Types_Group3 CRC Handle Structure definition   
+  * @{
+  */
+typedef struct
+{
+  CRC_TypeDef                 *Instance;   /*!< Register base address        */ 
+  
+  CRC_InitTypeDef             Init;        /*!< CRC configuration parameters */
+  
+  HAL_LockTypeDef             Lock;        /*!< CRC Locking object           */
+    
+  __IO HAL_CRC_StateTypeDef   State;       /*!< CRC communication state      */
+  
+  uint32_t InputDataFormat;                /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format. 
+                                            Can be either 
+                                            CRC_INPUTDATA_FORMAT_BYTES       input data is a stream of bytes (8-bit data)
+                                            CRC_INPUTDATA_FORMAT_HALFWORDS   input data is a stream of half-words (16-bit data)
+                                            CRC_INPUTDATA_FORMAT_WORDS       input data is a stream of words (32-bits data)                                                                                        
+                                           Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error
+                                           must occur if InputBufferFormat is not one of the three values listed above  */ 
+}CRC_HandleTypeDef;
+/** 
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Constants   CRC exported constants
+  * @{
+  */
+  
+/** @defgroup CRC_Default_Polynomial_Value    Default CRC generating polynomial
+  * @{
+  */
+#define DEFAULT_CRC32_POLY      0x04C11DB7
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Default_InitValue    Default CRC computation initialization value
+  * @{
+  */
+#define DEFAULT_CRC_INITVALUE   0xFFFFFFFF
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Default_Polynomial    Indicates whether or not default polynomial is used
+  * @{
+  */
+#define DEFAULT_POLYNOMIAL_ENABLE       ((uint8_t)0x00)
+#define DEFAULT_POLYNOMIAL_DISABLE      ((uint8_t)0x01)
+
+
+/**
+  * @}
+  */
+ 
+/** @defgroup CRC_Default_InitValue_Use    Indicates whether or not default init value is used
+  * @{
+  */                                      
+#define DEFAULT_INIT_VALUE_ENABLE      ((uint8_t)0x00)
+#define DEFAULT_INIT_VALUE_DISABLE     ((uint8_t)0x01)
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the IP
+  * @{
+  */
+#define CRC_POLYLENGTH_32B                  ((uint32_t)0x00000000)
+#define CRC_POLYLENGTH_16B                  ((uint32_t)CRC_CR_POLYSIZE_0)
+#define CRC_POLYLENGTH_8B                   ((uint32_t)CRC_CR_POLYSIZE_1)
+#define CRC_POLYLENGTH_7B                   ((uint32_t)CRC_CR_POLYSIZE)
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions
+  * @{
+  */
+#define HAL_CRC_LENGTH_32B     32
+#define HAL_CRC_LENGTH_16B     16
+#define HAL_CRC_LENGTH_8B       8
+#define HAL_CRC_LENGTH_7B       7
+
+/**
+  * @}
+  */  
+
+/** @defgroup CRC_Input_Buffer_Format CRC input buffer format
+  * @{
+  */
+/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but
+ * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set 
+ * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for 
+ * the CRC APIs to provide a correct result */   
+#define CRC_INPUTDATA_FORMAT_UNDEFINED             ((uint32_t)0x00000000)
+#define CRC_INPUTDATA_FORMAT_BYTES                 ((uint32_t)0x00000001)
+#define CRC_INPUTDATA_FORMAT_HALFWORDS             ((uint32_t)0x00000002)
+#define CRC_INPUTDATA_FORMAT_WORDS                 ((uint32_t)0x00000003)
+/** 
+  * @}
+  */   
+
+/** 
+  * @}
+  */ 
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup CRC_Exported_Macros CRC exported macros
+  * @{
+  */
+
+/** @brief Reset CRC handle state
+  * @param  __HANDLE__: CRC handle.
+  * @retval None
+  */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+  * @brief  Reset CRC Data Register.
+  * @param  __HANDLE__: CRC handle
+  * @retval None.
+  */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+  * @brief  Set CRC INIT non-default value
+  * @param  __HANDLE__    : CRC handle
+  * @param  __INIT__      : 32-bit initial value  
+  * @retval None.
+  */
+#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__))    
+
+/**
+  * @brief Stores a 8-bit data in the Independent Data(ID) register.
+  * @param __HANDLE__: CRC handle
+  * @param __VALUE__: 8-bit value to be stored in the ID register
+  * @retval None
+  */
+#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, CRC_IDR_IDR, (__VALUE__)))
+
+/**
+  * @brief Returns the 8-bit data stored in the Independent Data(ID) register.
+  * @param __HANDLE__: CRC handle
+  * @retval 8-bit value of the ID register 
+  */
+#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
+/**
+  * @}
+  */
+
+
+/* Include CRC HAL Extension module */
+#include "stm32f7xx_hal_crc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Functions CRC Exported Functions
+  * @{
+  */
+
+/** @defgroup CRC_Exported_Functions_Group1 Initialization/de-initialization functions
+  * @{
+  */
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+/**
+  * @}
+  */
+
+/* Aliases for inter STM32 series compatibility */
+#define HAL_CRC_Input_Data_Reverse   HAL_CRCEx_Input_Data_Reverse
+#define HAL_CRC_Output_Data_Reverse  HAL_CRCEx_Output_Data_Reverse
+
+/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
+  * @{
+  */
+/* Peripheral State and Error functions ***************************************/
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CRC_Private_Types CRC Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup CRC_Private_Defines CRC Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRC_Private_Variables CRC Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRC_Private_Constants CRC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRC_Private_Macros CRC Private Macros
+  * @{
+  */
+#define IS_DEFAULT_POLYNOMIAL(__DEFAULT__) (((__DEFAULT__) == DEFAULT_POLYNOMIAL_ENABLE) || \
+                                            ((__DEFAULT__) == DEFAULT_POLYNOMIAL_DISABLE))
+#define IS_DEFAULT_INIT_VALUE(__VALUE__)  (((__VALUE__) == DEFAULT_INIT_VALUE_ENABLE) || \
+                                           ((__VALUE__) == DEFAULT_INIT_VALUE_DISABLE))
+#define IS_CRC_POL_LENGTH(__LENGTH__)     (((__LENGTH__) == CRC_POLYLENGTH_32B) || \
+                                           ((__LENGTH__) == CRC_POLYLENGTH_16B) || \
+                                           ((__LENGTH__) == CRC_POLYLENGTH_8B)  || \
+                                           ((__LENGTH__) == CRC_POLYLENGTH_7B))
+#define IS_CRC_INPUTDATA_FORMAT(__FORMAT__)       (((__FORMAT__) == CRC_INPUTDATA_FORMAT_BYTES) || \
+                                                   ((__FORMAT__) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \
+                                                   ((__FORMAT__) == CRC_INPUTDATA_FORMAT_WORDS))
+
+
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup CRC_Private_Functions_Prototypes CRC Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRC_Private_Functions CRC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_crc_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,242 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_crc_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Extended CRC HAL module driver.
+  *    
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the CRC peripheral:
+  *           + Initialization/de-initialization functions
+  *         
+  @verbatim
+  ==============================================================================
+                    ##### CRC specific features #####
+  ==============================================================================
+  [..] 
+  (#) Polynomial configuration.
+  (#) Input data reverse mode.
+  (#) Output data reverse mode.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CRCEx
+  * @brief CRC Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @addtogroup CRCEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup CRCEx_Exported_Functions_Group1
+ *  @brief    Extended CRC features functions
+ *
+@verbatim   
+ ===============================================================================
+            ##### CRC Extended features functions #####
+ ===============================================================================  
+    [..]
+This subsection provides function allowing to:
+      (+) Set CRC polynomial if different from default one.
+ 
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Initializes the CRC polynomial if different from default one.
+  * @param  hcrc: CRC handle
+  * @param  Pol: CRC generating polynomial (7, 8, 16 or 32-bit long)
+  *         This parameter is written in normal representation, e.g.
+  *         for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65 
+  *         for a polynomial of degree 16, X^16 + X^12 + X^5 + 1 is written 0x1021     
+  * @param  PolyLength: CRC polynomial length 
+  *         This parameter can be one of the following values:
+  *          @arg CRC_POLYLENGTH_7B: 7-bit long CRC (generating polynomial of degree 7)
+  *          @arg CRC_POLYLENGTH_8B: 8-bit long CRC (generating polynomial of degree 8)
+  *          @arg CRC_POLYLENGTH_16B: 16-bit long CRC (generating polynomial of degree 16)
+  *          @arg CRC_POLYLENGTH_32B: 32-bit long CRC (generating polynomial of degree 32)                
+  * @retval HAL status
+  */                                   
+HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength)
+{
+  uint32_t msb = 31; /* polynomial degree is 32 at most, so msb is initialized to max value */
+
+  /* Check the parameters */
+  assert_param(IS_CRC_POL_LENGTH(PolyLength));
+  
+  /* check polynomial definition vs polynomial size:
+   * polynomial length must be aligned with polynomial
+   * definition. HAL_ERROR is reported if Pol degree is 
+   * larger than that indicated by PolyLength.
+   * Look for MSB position: msb will contain the degree of
+   *  the second to the largest polynomial member. E.g., for
+   *  X^7 + X^6 + X^5 + X^2 + 1, msb = 6. */
+  while (((Pol & ((uint32_t)(0x1) << msb)) == 0) && (msb-- > 0))
+  {
+  }
+
+  switch (PolyLength)
+  {
+    case CRC_POLYLENGTH_7B:
+      if (msb >= HAL_CRC_LENGTH_7B)
+      { 
+        return  HAL_ERROR;
+      }
+      break;
+    case CRC_POLYLENGTH_8B:
+      if (msb >= HAL_CRC_LENGTH_8B)
+      {
+        return  HAL_ERROR;
+      }
+      break;
+    case CRC_POLYLENGTH_16B:
+      if (msb >= HAL_CRC_LENGTH_16B)
+      {
+        return  HAL_ERROR;
+      }
+      break;
+    case CRC_POLYLENGTH_32B:
+      /* no polynomial definition vs. polynomial length issue possible */
+      break;
+  default:
+      break;
+  }
+
+  /* set generating polynomial */
+  WRITE_REG(hcrc->Instance->POL, Pol);
+  
+  /* set generating polynomial size */
+  MODIFY_REG(hcrc->Instance->CR, CRC_CR_POLYSIZE, PolyLength);  
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the Reverse Input data mode.
+  * @param  hcrc: CRC handle
+  * @param  InputReverseMode: Input Data inversion mode
+  *         This parameter can be one of the following values:
+  *          @arg CRC_INPUTDATA_INVERSION_NONE: no change in bit order (default value)
+  *          @arg CRC_INPUTDATA_INVERSION_BYTE: Byte-wise bit reversal
+  *          @arg CRC_INPUTDATA_INVERSION_HALFWORD: HalfWord-wise bit reversal
+  *          @arg CRC_INPUTDATA_INVERSION_WORD: Word-wise bit reversal              
+  * @retval HAL status
+  */                                   
+HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode)
+{  
+  /* Check the parameters */
+  assert_param(IS_CRC_INPUTDATA_INVERSION_MODE(InputReverseMode));
+  
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_BUSY;
+
+  /* set input data inversion mode */
+  MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_IN, InputReverseMode);    
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the Reverse Output data mode.
+  * @param  hcrc: CRC handle
+  * @param  OutputReverseMode: Output Data inversion mode
+  *         This parameter can be one of the following values:
+  *          @arg CRC_OUTPUTDATA_INVERSION_DISABLE: no CRC inversion (default value)
+  *          @arg CRC_OUTPUTDATA_INVERSION_ENABLE: bit-level inversion (e.g for a 8-bit CRC: 0xB5 becomes 0xAD)
+  * @retval HAL status
+  */                                   
+HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode)
+{
+  /* Check the parameters */
+  assert_param(IS_CRC_OUTPUTDATA_INVERSION_MODE(OutputReverseMode));
+  
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_BUSY;
+
+  /* set output data inversion mode */
+  MODIFY_REG(hcrc->Instance->CR, CRC_CR_REV_OUT, OutputReverseMode); 
+      
+  /* Change CRC peripheral state */
+  hcrc->State = HAL_CRC_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+
+#endif /* HAL_CRC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_crc_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,168 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_crc_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of CRC HAL extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CRC_EX_H
+#define __STM32F7xx_HAL_CRC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CRCEx CRCEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CRCEx_Exported_Constants CRC Extended exported constants
+ * @{
+ */
+
+/** @defgroup CRCEx_Input_Data_Inversion CRC Extended input data inversion modes
+  * @{
+  */
+#define CRC_INPUTDATA_INVERSION_NONE              ((uint32_t)0x00000000)
+#define CRC_INPUTDATA_INVERSION_BYTE              ((uint32_t)CRC_CR_REV_IN_0)
+#define CRC_INPUTDATA_INVERSION_HALFWORD          ((uint32_t)CRC_CR_REV_IN_1)
+#define CRC_INPUTDATA_INVERSION_WORD              ((uint32_t)CRC_CR_REV_IN)
+
+#define IS_CRC_INPUTDATA_INVERSION_MODE(__MODE__)     (((__MODE__) == CRC_INPUTDATA_INVERSION_NONE) || \
+                                                       ((__MODE__) == CRC_INPUTDATA_INVERSION_BYTE) || \
+                                                       ((__MODE__) == CRC_INPUTDATA_INVERSION_HALFWORD) || \
+                                                       ((__MODE__) == CRC_INPUTDATA_INVERSION_WORD))
+/**
+  * @}
+  */
+
+/** @defgroup CRCEx_Output_Data_Inversion CRC Extended output data inversion modes
+  * @{
+  */
+#define CRC_OUTPUTDATA_INVERSION_DISABLE         ((uint32_t)0x00000000)
+#define CRC_OUTPUTDATA_INVERSION_ENABLE          ((uint32_t)CRC_CR_REV_OUT)
+
+#define IS_CRC_OUTPUTDATA_INVERSION_MODE(__MODE__)    (((__MODE__) == CRC_OUTPUTDATA_INVERSION_DISABLE) || \
+                                                       ((__MODE__) == CRC_OUTPUTDATA_INVERSION_ENABLE))
+/**                                               
+  * @}
+  */
+
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup CRCEx_Exported_Macros CRC Extended exported macros
+  * @{
+  */
+    
+/**
+  * @brief  Set CRC output reversal
+  * @param  __HANDLE__    : CRC handle
+  * @retval None.
+  */
+#define  __HAL_CRC_OUTPUTREVERSAL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_REV_OUT)   
+
+/**
+  * @brief  Unset CRC output reversal
+  * @param  __HANDLE__    : CRC handle
+  * @retval None.
+  */
+#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT))   
+
+/**
+  * @brief  Set CRC non-default polynomial
+  * @param  __HANDLE__    : CRC handle
+  * @param  __POLYNOMIAL__: 7, 8, 16 or 32-bit polynomial  
+  * @retval None.
+  */
+#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__))
+
+/**
+  * @}
+  */
+
+
+/** @defgroup CRCEx_Exported_Functions CRC Extended Exported Functions
+  * @{
+  */
+
+/** @defgroup CRCEx_Exported_Functions_Group1 Extended CRC features functions
+  * @{
+  */
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength);
+HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode);
+HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode);
+
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CRC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_cryp.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,3823 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_cryp.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   CRYP HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Cryptography (CRYP) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + AES processing functions
+  *           + DES processing functions
+  *           + TDES processing functions
+  *           + DMA callback functions
+  *           + CRYP IRQ handler management
+  *           + Peripheral State functions
+  *
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The CRYP HAL driver can be used as follows:
+
+      (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit():
+         (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()
+         (##) In case of using interrupts (e.g. HAL_CRYP_AESECB_Encrypt_IT())
+             (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority()
+             (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ()
+             (+++) In CRYP IRQ handler, call HAL_CRYP_IRQHandler()
+         (##) In case of using DMA to control data transfer (e.g. HAL_CRYP_AESECB_Encrypt_DMA())
+             (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+             (+++) Configure and enable two DMA streams one for managing data transfer from
+                 memory to peripheral (input stream) and another stream for managing data
+                 transfer from peripheral to memory (output stream)
+             (+++) Associate the initialized DMA handle to the CRYP DMA handle
+                 using  __HAL_LINKDMA()
+             (+++) Configure the priority and enable the NVIC for the transfer complete
+                 interrupt on the two DMA Streams. The output stream should have higher
+                 priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+    
+      (#)Initialize the CRYP HAL using HAL_CRYP_Init(). This function configures mainly:
+         (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit
+         (##) The key size: 128, 192 and 256. This parameter is relevant only for AES
+         (##) The encryption/decryption key. It's size depends on the algorithm
+              used for encryption/decryption
+         (##) The initialization vector (counter). It is not used ECB mode.
+    
+      (#)Three processing (encryption/decryption) functions are available:
+         (##) Polling mode: encryption and decryption APIs are blocking functions
+              i.e. they process the data and wait till the processing is finished,
+              e.g. HAL_CRYP_AESCBC_Encrypt()
+         (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+              i.e. they process the data under interrupt,
+              e.g. HAL_CRYP_AESCBC_Encrypt_IT()
+         (##) DMA mode: encryption and decryption APIs are not blocking functions
+              i.e. the data transfer is ensured by DMA,
+              e.g. HAL_CRYP_AESCBC_Encrypt_DMA()
+    
+      (#)When the processing function is called at first time after HAL_CRYP_Init()
+         the CRYP peripheral is initialized and processes the buffer in input.
+         At second call, the processing function performs an append of the already
+         processed buffer.
+         When a new data block is to be processed, call HAL_CRYP_Init() then the
+         processing function.
+    
+       (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+#if defined (STM32F756xx)
+/** @defgroup CRYP CRYP
+  * @brief CRYP HAL module driver.
+  * @{
+  */
+
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup CRYP_Private_define
+  * @{
+  */
+#define CRYP_TIMEOUT_VALUE  1
+/**
+  * @}
+  */ 
+  
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup CRYP_Private_Functions_prototypes
+  * @{
+  */  
+static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize);
+static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize);
+static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout);
+static HAL_StatusTypeDef CRYP_ProcessData2Words(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout);
+static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma);
+static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma);
+static void CRYP_DMAError(DMA_HandleTypeDef *hdma);
+static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr);
+static void CRYP_SetTDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetTDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+static void CRYP_SetDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
+/**
+  * @}
+  */ 
+/* Private functions ---------------------------------------------------------*/
+
+/** @addtogroup CRYP_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  DMA CRYP Input Data process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma)  
+{
+  CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  
+  /* Disable the DMA transfer for input FIFO request by resetting the DIEN bit
+     in the DMACR register */
+  hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN);
+  
+  /* Call input data transfer complete callback */
+  HAL_CRYP_InCpltCallback(hcryp);
+}
+
+/**
+  * @brief  DMA CRYP Output Data process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  
+  /* Disable the DMA transfer for output FIFO request by resetting the DOEN bit
+     in the DMACR register */
+  hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN);
+  
+  /* Disable CRYP */
+  __HAL_CRYP_DISABLE(hcryp);
+  
+  /* Change the CRYP state to ready */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Call output data transfer complete callback */
+  HAL_CRYP_OutCpltCallback(hcryp);
+}
+
+/**
+  * @brief  DMA CRYP communication error callback. 
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYP_DMAError(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  hcryp->State= HAL_CRYP_STATE_READY;
+  HAL_CRYP_ErrorCallback(hcryp);
+}
+
+/**
+  * @brief  Writes the Key in Key registers. 
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Key: Pointer to Key buffer
+  * @param  KeySize: Size of Key
+  * @retval None
+  */
+static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize)
+{
+  uint32_t keyaddr = (uint32_t)Key;
+  
+  switch(KeySize)
+  {
+  case CRYP_KEYSIZE_256B:
+    /* Key Initialisation */
+    hcryp->Instance->K0LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K0RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  case CRYP_KEYSIZE_192B:
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  case CRYP_KEYSIZE_128B:       
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  Writes the InitVector/InitCounter in IV registers. 
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  InitVector: Pointer to InitVector/InitCounter buffer
+  * @param  IVSize: Size of the InitVector/InitCounter
+  * @retval None
+  */
+static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize)
+{
+  uint32_t ivaddr = (uint32_t)InitVector;
+  
+  switch(IVSize)
+  {
+  case CRYP_KEYSIZE_128B:
+    hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV1LR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV1RR = __REV(*(uint32_t*)(ivaddr));
+    break;
+    /* Whatever key size 192 or 256, Init vector is written in IV0LR and IV0RR */
+  case CRYP_KEYSIZE_192B:
+    hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+    break;
+  case CRYP_KEYSIZE_256B:
+    hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+    ivaddr+=4;
+    hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+    break;
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  Process Data: Writes Input data in polling mode and read the output data
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Input: Pointer to the Input buffer
+  * @param  Ilength: Length of the Input buffer, must be a multiple of 16.
+  * @param  Output: Pointer to the returned buffer
+  * @param  Timeout: Timeout value
+  * @retval None
+  */
+static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  
+  uint32_t i = 0;
+  uint32_t inputaddr  = (uint32_t)Input;
+  uint32_t outputaddr = (uint32_t)Output;
+  
+  for(i=0; (i < Ilength); i+=16)
+  {
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+    {    
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+        
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+  }
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Process Data: Write Input data in polling mode. 
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Input: Pointer to the Input buffer
+  * @param  Ilength: Length of the Input buffer, must be a multiple of 8
+  * @param  Output: Pointer to the returned buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval None
+  */
+static HAL_StatusTypeDef CRYP_ProcessData2Words(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  
+  uint32_t i = 0;
+  uint32_t inputaddr  = (uint32_t)Input;
+  uint32_t outputaddr = (uint32_t)Output;
+  
+  for(i=0; (i < Ilength); i+=8)
+  {
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    
+    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */          
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+  }
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the DMA configuration and start the DMA transfer
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  inputaddr: address of the Input buffer
+  * @param  Size: Size of the Input buffer, must be a multiple of 16.
+  * @param  outputaddr: address of the Output buffer
+  * @retval None
+  */
+static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr)
+{
+  /* Set the CRYP DMA transfer complete callback */
+  hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt;
+  /* Set the DMA error callback */
+  hcryp->hdmain->XferErrorCallback = CRYP_DMAError;
+  
+  /* Set the CRYP DMA transfer complete callback */
+  hcryp->hdmaout->XferCpltCallback = CRYP_DMAOutCplt;
+  /* Set the DMA error callback */
+  hcryp->hdmaout->XferErrorCallback = CRYP_DMAError;
+  
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+  
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DR, Size/4);
+
+  /* Enable In DMA request */
+  hcryp->Instance->DMACR = (CRYP_DMACR_DIEN);
+  
+  /* Enable the DMA Out DMA Stream */
+  HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUT, outputaddr, Size/4);
+  
+  /* Enable Out DMA request */
+  hcryp->Instance->DMACR |= CRYP_DMACR_DOEN;
+ 
+}
+
+/**
+  * @brief  Sets the CRYP peripheral in DES ECB mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Direction: Encryption or decryption
+  * @retval None
+  */
+static void CRYP_SetDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_DES_ECB | Direction);
+    
+    /* Set the key */
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(hcryp->Init.pKey));
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(hcryp->Init.pKey+4));
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+}
+
+/**
+  * @brief  Sets the CRYP peripheral in DES CBC mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Direction: Encryption or decryption
+  * @retval None
+  */
+static void CRYP_SetDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_DES_CBC | Direction);
+    
+    /* Set the key */
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(hcryp->Init.pKey));
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(hcryp->Init.pKey+4));
+    
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_256B);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+}
+
+/**
+  * @brief  Sets the CRYP peripheral in TDES ECB mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Direction: Encryption or decryption
+  * @retval None
+  */
+static void CRYP_SetTDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_TDES_ECB | Direction);
+    
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, CRYP_KEYSIZE_192B);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+}
+
+/**
+  * @brief  Sets the CRYP peripheral in TDES CBC mode
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Direction: Encryption or decryption
+  * @retval None
+  */
+static void CRYP_SetTDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
+{
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the CRYP peripheral in AES CBC mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_TDES_CBC | Direction);
+    
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, CRYP_KEYSIZE_192B);
+    
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_256B);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+}
+
+/**
+  * @}
+  */ 
+  
+ /* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRYP_Exported_Functions
+  * @{
+  */ 
+  
+/** @defgroup CRYP_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions. 
+ *
+@verbatim    
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the CRYP according to the specified parameters 
+          in the CRYP_InitTypeDef and creates the associated handle
+      (+) DeInitialize the CRYP peripheral
+      (+) Initialize the CRYP MSP
+      (+) DeInitialize CRYP MSP 
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRYP according to the specified
+  *         parameters in the CRYP_InitTypeDef and creates the associated handle.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp)
+{ 
+  /* Check the CRYP handle allocation */
+  if(hcryp == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_CRYP_KEYSIZE(hcryp->Init.KeySize));
+  assert_param(IS_CRYP_DATATYPE(hcryp->Init.DataType));
+    
+  if(hcryp->State == HAL_CRYP_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hcryp->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_CRYP_MspInit(hcryp);
+  }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Set the key size and data type*/
+  CRYP->CR = (uint32_t) (hcryp->Init.KeySize | hcryp->Init.DataType);
+  
+  /* Reset CrypInCount and CrypOutCount */
+  hcryp->CrypInCount = 0;
+  hcryp->CrypOutCount = 0;
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Set the default CRYP phase */
+  hcryp->Phase = HAL_CRYP_PHASE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the CRYP peripheral. 
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp)
+{
+  /* Check the CRYP handle allocation */
+  if(hcryp == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Set the default CRYP phase */
+  hcryp->Phase = HAL_CRYP_PHASE_READY;
+  
+  /* Reset CrypInCount and CrypOutCount */
+  hcryp->CrypInCount = 0;
+  hcryp->CrypOutCount = 0;
+  
+  /* Disable the CRYP Peripheral Clock */
+  __HAL_CRYP_DISABLE(hcryp);
+  
+  /* DeInit the low level hardware: CLOCK, NVIC.*/
+  HAL_CRYP_MspDeInit(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hcryp);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP MSP.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcryp);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes CRYP MSP.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcryp);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group2 AES processing functions 
+ *  @brief   processing functions. 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### AES processing functions #####
+  ==============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Encrypt plaintext using AES-128/192/256 using chaining modes
+      (+) Decrypt cyphertext using AES-128/192/256 using chaining modes
+    [..]  Three processing functions are available:
+      (+) Polling mode
+      (+) Interrupt mode
+      (+) DMA mode
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+    
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+  
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+    
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+    
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+  
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp,pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{  
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+    
+    /* Set the CRYP peripheral in AES ECB mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+    
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+  
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+   uint32_t tickstart = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+    
+    /* Set the CRYP peripheral in AES Key mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Get tick */ 
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */          
+          __HAL_UNLOCK(hcryp);
+        
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    
+    /* Disable CRYP */
+    __HAL_CRYP_DISABLE(hcryp);
+    
+    /* Reset the ALGOMODE bits*/
+    CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+    
+    /* Set the CRYP peripheral in AES ECB decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+    
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+    
+    /* Set the CRYP peripheral in AES Key mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Get tick */ 
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    
+    /* Reset the ALGOMODE bits*/
+    CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+    
+    /* Set the CRYP peripheral in AES CBC decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+    
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+  
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{  
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+    
+    /* Set the CRYP peripheral in AES CTR mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+    
+    /* Set the Initialization Vector */
+    CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+  
+    /* Write Plain Data and Get Cypher Data */
+    if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB encryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES ECB mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Locked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC encryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {      
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES CBC mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+      
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Locked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR encryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES CTR mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+      
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB decryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;
+
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+    
+    /* Set the CRYP peripheral in AES Key mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Get tick */ 
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+      {
+        /* Change state */
+        hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hcryp);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Reset the ALGOMODE bits*/
+    CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+    
+    /* Set the CRYP peripheral in AES ECB decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+     
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC decryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+
+  uint32_t tickstart = 0;   
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    /* Get the buffer addresses and sizes */    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES Key mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+      
+      /* Enable CRYP */
+      __HAL_CRYP_ENABLE(hcryp);
+      
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+      {
+        /* Change state */
+        hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hcryp);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+    
+      /* Reset the ALGOMODE bits*/
+      CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+    
+      /* Set the CRYP peripheral in AES CBC decryption mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+    
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+    
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+      /* Enable CRYP */
+      __HAL_CRYP_ENABLE(hcryp);
+      
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR decryption mode using Interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    /* Get the buffer addresses and sizes */    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES CTR mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+      
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES ECB mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+     
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES ECB mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
+      
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+       /* Set the phase */
+       hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+     }
+     /* Set the input and output addresses and start DMA transfer */ 
+     CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+     
+     /* Process Unlocked */
+     __HAL_UNLOCK(hcryp);
+     
+     /* Return function status */
+     return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16.
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+    
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES ECB mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
+      
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+       /* Set the phase */
+       hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES ECB decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;   
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+    /* Set the key */
+    CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+    
+    /* Set the CRYP peripheral in AES Key mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    
+    while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+      {
+        /* Change state */
+        hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hcryp);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Reset the ALGOMODE bits*/
+    CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+    
+    /* Set the CRYP peripheral in AES ECB decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+     /* Set the phase */
+     hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+     
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+     /* Process Unlocked */
+     __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CBC encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16 bytes
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;   
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES Key mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
+      
+      /* Enable CRYP */
+      __HAL_CRYP_ENABLE(hcryp);
+      
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+      
+      /* Reset the ALGOMODE bits*/
+      CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
+      
+      /* Set the CRYP peripheral in AES CBC decryption mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
+      
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CTR decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{  
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES CTR mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
+      
+      /* Set the Initialization Vector */
+      CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+
+/**
+  * @}
+  */
+  
+/** @defgroup CRYP_Exported_Functions_Group3 DES processing functions 
+ *  @brief   processing functions. 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### DES processing functions #####
+  ==============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Encrypt plaintext using DES using ECB or CBC chaining modes
+      (+) Decrypt cyphertext using ECB or CBC chaining modes
+    [..]  Three processing functions are available:
+      (+) Polling mode
+      (+) Interrupt mode
+      (+) DMA mode
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB encryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Set CRYP peripheral in DES ECB encryption mode */
+  CRYP_SetDESECBMode(hcryp, 0);
+  
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+  
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Set CRYP peripheral in DES ECB decryption mode */
+  CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+  
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+  
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES CBC encryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Set CRYP peripheral in DES CBC encryption mode */
+  CRYP_SetDESCBCMode(hcryp, 0);
+  
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+  
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Set CRYP peripheral in DES CBC decryption mode */
+  CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+  
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+  
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB encryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in DES ECB encryption mode */
+    CRYP_SetDESECBMode(hcryp, 0);
+    
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES CBC encryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in DES CBC encryption mode */
+    CRYP_SetDESCBCMode(hcryp, 0);
+    
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in DES ECB decryption mode */
+    CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+    
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in DES CBC decryption mode */
+    CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+    
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in DES ECB encryption mode */
+    CRYP_SetDESECBMode(hcryp, 0);
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES CBC encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in DES CBC encryption mode */
+    CRYP_SetDESCBCMode(hcryp, 0);
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in DES ECB decryption mode */
+    CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in DES ECB decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in DES CBC decryption mode */
+    CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group4 TDES processing functions 
+ *  @brief   processing functions. 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### TDES processing functions #####
+  ==============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Encrypt plaintext using TDES based on ECB or CBC chaining modes
+      (+) Decrypt cyphertext using TDES based on ECB or CBC chaining modes
+    [..]  Three processing functions are available:
+      (+) Polling mode
+      (+) Interrupt mode
+      (+) DMA mode
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Set CRYP peripheral in TDES ECB encryption mode */
+  CRYP_SetTDESECBMode(hcryp, 0);
+  
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+  
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{  
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Set CRYP peripheral in TDES ECB decryption mode */
+  CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+  
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+  
+  /* Write Cypher Data and Get Plain Data */
+  if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC encryption mode
+  *         then encrypt pPlainData. The cypher data are available in pCypherData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Set CRYP peripheral in TDES CBC encryption mode */
+  CRYP_SetTDESCBCMode(hcryp, 0);
+  
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+  
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC decryption mode
+  *         then decrypted pCypherData. The cypher data are available in pPlainData
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Timeout: Specify Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Set CRYP peripheral in TDES CBC decryption mode */
+  CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+  
+  /* Enable CRYP */
+  __HAL_CRYP_ENABLE(hcryp);
+  
+  /* Write Cypher Data and Get Plain Data */
+  if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Change the CRYP state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB encryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in TDES ECB encryption mode */
+    CRYP_SetTDESECBMode(hcryp, 0);
+    
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      /* Disable IT */
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call the Output data transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC encryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in TDES CBC encryption mode */
+    CRYP_SetTDESCBCMode(hcryp, 0);
+    
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+        
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB decryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in TDES ECB decryption mode */
+    CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+    
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC decryption mode.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in TDES CBC decryption mode */
+    CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+    
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable CRYP */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+
+    hcryp->pCrypInBuffPtr += 8;
+    hcryp->CrypInCount -= 8;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+
+    hcryp->pCrypOutBuffPtr += 8;
+    hcryp->CrypOutCount -= 8;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Disable CRYP */
+      __HAL_CRYP_DISABLE(hcryp);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in TDES ECB encryption mode */
+    CRYP_SetTDESECBMode(hcryp, 0);
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in TDES CBC encryption mode */
+    CRYP_SetTDESCBCMode(hcryp, 0);
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES ECB decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in TDES ECB decryption mode */
+    CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in TDES CBC decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 8
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+    
+    /* Change the CRYP state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Set CRYP peripheral in TDES CBC decryption mode */
+    CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group5 DMA callback functions 
+ *  @brief   DMA callback functions. 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### DMA callback functions  #####
+  ==============================================================================  
+    [..]  This section provides DMA callback functions:
+      (+) DMA Input data transfer complete
+      (+) DMA Output data transfer complete
+      (+) DMA error
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Input FIFO transfer completed callbacks.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcryp);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_InCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Output FIFO transfer completed callbacks.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcryp);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_OutCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  CRYP error callbacks.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+ __weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hcryp);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_CRYP_ErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group6 CRYP IRQ handler management  
+ *  @brief   CRYP IRQ handler.
+ *
+@verbatim   
+  ==============================================================================
+                ##### CRYP IRQ handler management #####
+  ==============================================================================  
+[..]  This section provides CRYP IRQ handler function.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function handles CRYP interrupt request.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp)
+{
+  switch(CRYP->CR & CRYP_CR_ALGOMODE_DIRECTION)
+  {
+  case CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT:
+    HAL_CRYP_TDESECB_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT:
+    HAL_CRYP_TDESECB_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT:
+    HAL_CRYP_TDESCBC_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT:
+    HAL_CRYP_TDESCBC_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT:
+    HAL_CRYP_DESECB_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_DES_ECB_DECRYPT:
+    HAL_CRYP_DESECB_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT:
+    HAL_CRYP_DESCBC_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_DES_CBC_DECRYPT:
+    HAL_CRYP_DESCBC_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT:
+    HAL_CRYP_AESECB_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_AES_ECB_DECRYPT:
+    HAL_CRYP_AESECB_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT:
+    HAL_CRYP_AESCBC_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_AES_CBC_DECRYPT:
+    HAL_CRYP_AESCBC_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT:
+    HAL_CRYP_AESCTR_Encrypt_IT(hcryp, NULL, 0, NULL);       
+    break;
+    
+  case CRYP_CR_ALGOMODE_AES_CTR_DECRYPT:
+    HAL_CRYP_AESCTR_Decrypt_IT(hcryp, NULL, 0, NULL);        
+    break;
+    
+  default:
+    break;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Functions_Group7 Peripheral State functions 
+ *  @brief   Peripheral State functions. 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### Peripheral State functions #####
+  ==============================================================================  
+    [..]
+    This subsection permits to get in run-time the status of the peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the CRYP state.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval HAL state
+  */
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp)
+{
+  return hcryp->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+
+/**
+  * @}
+  */
+#endif /* STM32F756xx */
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_cryp.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,536 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_cryp.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of CRYP HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CRYP_H
+#define __STM32F7xx_HAL_CRYP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined (STM32F756xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CRYP
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup CRYP_Exported_Types CRYP Exported Types
+  * @{
+  */
+
+/** @defgroup CRYP_Exported_Types_Group1 CRYP Configuration Structure definition
+  * @{
+  */
+
+typedef struct
+{
+  uint32_t DataType;    /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+                             This parameter can be a value of @ref CRYP_Data_Type */
+
+  uint32_t KeySize;     /*!< Used only in AES mode only : 128, 192 or 256 bit key length. 
+                             This parameter can be a value of @ref CRYP_Key_Size */
+
+  uint8_t* pKey;        /*!< The key used for encryption/decryption */
+
+  uint8_t* pInitVect;   /*!< The initialization vector used also as initialization
+                             counter in CTR mode */
+
+  uint8_t IVSize;       /*!< The size of initialization vector. 
+                             This parameter (called nonce size in CCM) is used only 
+                             in AES-128/192/256 encryption/decryption CCM mode */
+
+  uint8_t TagSize;      /*!< The size of returned authentication TAG. 
+                             This parameter is used only in AES-128/192/256 
+                             encryption/decryption CCM mode */
+
+  uint8_t* Header;      /*!< The header used in GCM and CCM modes */
+
+  uint32_t HeaderSize;  /*!< The size of header buffer in bytes */
+
+  uint8_t* pScratch;    /*!< Scratch buffer used to append the header. It's size must be equal to header size + 21 bytes.
+                             This parameter is used only in AES-128/192/256 encryption/decryption CCM mode */
+}CRYP_InitTypeDef;
+
+/** 
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Types_Group2 CRYP State structures definition
+  * @{
+  */
+    
+
+typedef enum
+{
+  HAL_CRYP_STATE_RESET             = 0x00,  /*!< CRYP not yet initialized or disabled  */
+  HAL_CRYP_STATE_READY             = 0x01,  /*!< CRYP initialized and ready for use    */
+  HAL_CRYP_STATE_BUSY              = 0x02,  /*!< CRYP internal processing is ongoing   */
+  HAL_CRYP_STATE_TIMEOUT           = 0x03,  /*!< CRYP timeout state                    */
+  HAL_CRYP_STATE_ERROR             = 0x04   /*!< CRYP error state                      */
+}HAL_CRYP_STATETypeDef;
+
+/** 
+  * @}
+  */
+  
+/** @defgroup CRYP_Exported_Types_Group3 CRYP phase structures definition
+  * @{
+  */
+    
+
+typedef enum
+{
+  HAL_CRYP_PHASE_READY             = 0x01,    /*!< CRYP peripheral is ready for initialization. */
+  HAL_CRYP_PHASE_PROCESS           = 0x02,    /*!< CRYP peripheral is in processing phase */
+  HAL_CRYP_PHASE_FINAL             = 0x03     /*!< CRYP peripheral is in final phase
+                                                   This is relevant only with CCM and GCM modes */
+}HAL_PhaseTypeDef;
+
+/** 
+  * @}
+  */
+  
+/** @defgroup CRYP_Exported_Types_Group4 CRYP handle Structure definition
+  * @{
+  */
+  
+typedef struct
+{
+      CRYP_TypeDef             *Instance;        /*!< CRYP registers base address */
+
+      CRYP_InitTypeDef         Init;             /*!< CRYP required parameters */
+
+      uint8_t                  *pCrypInBuffPtr;  /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+      uint8_t                  *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+      __IO uint16_t            CrypInCount;      /*!< Counter of inputed data */
+
+      __IO uint16_t            CrypOutCount;     /*!< Counter of output data */
+
+      HAL_StatusTypeDef        Status;           /*!< CRYP peripheral status */
+
+      HAL_PhaseTypeDef         Phase;            /*!< CRYP peripheral phase */
+
+      DMA_HandleTypeDef        *hdmain;          /*!< CRYP In DMA handle parameters */
+
+      DMA_HandleTypeDef        *hdmaout;         /*!< CRYP Out DMA handle parameters */
+
+      HAL_LockTypeDef          Lock;             /*!< CRYP locking object */
+
+   __IO  HAL_CRYP_STATETypeDef State;            /*!< CRYP peripheral state */
+}CRYP_HandleTypeDef;
+
+/** 
+  * @}
+  */
+
+/** 
+  * @}
+  */
+    
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Constants CRYP Exported Constants
+  * @{
+  */
+
+/** @defgroup CRYP_Key_Size CRYP Key Size
+  * @{
+  */
+#define CRYP_KEYSIZE_128B         ((uint32_t)0x00000000)
+#define CRYP_KEYSIZE_192B         CRYP_CR_KEYSIZE_0
+#define CRYP_KEYSIZE_256B         CRYP_CR_KEYSIZE_1
+/**                                
+  * @}
+  */
+
+/** @defgroup CRYP_Data_Type CRYP Data Type
+  * @{
+  */
+#define CRYP_DATATYPE_32B         ((uint32_t)0x00000000)
+#define CRYP_DATATYPE_16B         CRYP_CR_DATATYPE_0
+#define CRYP_DATATYPE_8B          CRYP_CR_DATATYPE_1
+#define CRYP_DATATYPE_1B          CRYP_CR_DATATYPE
+/**                                
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Constants_Group3 CRYP CRYP_AlgoModeDirection
+  * @{
+  */
+#define CRYP_CR_ALGOMODE_DIRECTION         ((uint32_t)0x0008003C)
+#define CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT  ((uint32_t)0x00000000)
+#define CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT  ((uint32_t)0x00000004)
+#define CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT  ((uint32_t)0x00000008)
+#define CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT  ((uint32_t)0x0000000C)
+#define CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT   ((uint32_t)0x00000010)
+#define CRYP_CR_ALGOMODE_DES_ECB_DECRYPT   ((uint32_t)0x00000014)
+#define CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT   ((uint32_t)0x00000018)
+#define CRYP_CR_ALGOMODE_DES_CBC_DECRYPT   ((uint32_t)0x0000001C)
+#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT   ((uint32_t)0x00000020)
+#define CRYP_CR_ALGOMODE_AES_ECB_DECRYPT   ((uint32_t)0x00000024)
+#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT   ((uint32_t)0x00000028)
+#define CRYP_CR_ALGOMODE_AES_CBC_DECRYPT   ((uint32_t)0x0000002C)
+#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT   ((uint32_t)0x00000030)
+#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT   ((uint32_t)0x00000034)
+/**
+  * @}
+  */
+  
+/** @defgroup CRYP_Exported_Constants_Group4 CRYP CRYP_Interrupt
+  * @{
+  */
+#define CRYP_IT_INI               ((uint32_t)CRYP_IMSCR_INIM)   /*!< Input FIFO Interrupt */
+#define CRYP_IT_OUTI              ((uint32_t)CRYP_IMSCR_OUTIM)  /*!< Output FIFO Interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup CRYP_Exported_Constants_Group5 CRYP CRYP_Flags
+  * @{
+  */
+#define CRYP_FLAG_BUSY   ((uint32_t)0x00000010)  /*!< The CRYP core is currently 
+                                                     processing a block of data 
+                                                     or a key preparation (for 
+                                                     AES decryption). */
+#define CRYP_FLAG_IFEM   ((uint32_t)0x00000001)  /*!< Input FIFO is empty */
+#define CRYP_FLAG_IFNF   ((uint32_t)0x00000002)  /*!< Input FIFO is not Full */
+#define CRYP_FLAG_OFNE   ((uint32_t)0x00000004)  /*!< Output FIFO is not empty */
+#define CRYP_FLAG_OFFU   ((uint32_t)0x00000008)  /*!< Output FIFO is Full */
+#define CRYP_FLAG_OUTRIS ((uint32_t)0x01000002)  /*!< Output FIFO service raw 
+                                                      interrupt status */
+#define CRYP_FLAG_INRIS  ((uint32_t)0x01000001)  /*!< Input FIFO service raw 
+                                                      interrupt status */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Macros CRYP Exported Macros
+  * @{
+  */
+  
+/** @brief Reset CRYP handle state
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @retval None
+  */
+#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
+
+/**
+  * @brief  Enable/Disable the CRYP peripheral.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @retval None
+  */
+#define __HAL_CRYP_ENABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR |=  CRYP_CR_CRYPEN)
+#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &=  ~CRYP_CR_CRYPEN)
+
+/**
+  * @brief  Flush the data FIFO.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @retval None
+  */
+#define __HAL_CRYP_FIFO_FLUSH(__HANDLE__) ((__HANDLE__)->Instance->CR |=  CRYP_CR_FFLUSH)
+
+/**
+  * @brief  Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  MODE: The algorithm mode.
+  * @retval None
+  */
+#define __HAL_CRYP_SET_MODE(__HANDLE__, MODE)  ((__HANDLE__)->Instance->CR |= (uint32_t)(MODE))
+
+/** @brief  Check whether the specified CRYP flag is set or not.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data 
+  *                                 or a key preparation (for AES decryption). 
+  *            @arg CRYP_FLAG_IFEM: Input FIFO is empty
+  *            @arg CRYP_FLAG_IFNF: Input FIFO is not full
+  *            @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending
+  *            @arg CRYP_FLAG_OFNE: Output FIFO is not empty
+  *            @arg CRYP_FLAG_OFFU: Output FIFO is full
+  *            @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+
+#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 24)) == 0x01)?((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \
+                                                 ((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))
+
+/** @brief  Check whether the specified CRYP interrupt is set or not.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __INTERRUPT__: specifies the interrupt to check.
+  *         This parameter can be one of the following values:
+  *            @arg CRYP_IT_INRIS: Input FIFO service raw interrupt is pending
+  *            @arg CRYP_IT_OUTRIS: Output FIFO service raw interrupt is pending
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @brief  Enable the CRYP interrupt.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __INTERRUPT__: CRYP Interrupt.
+  * @retval None
+  */
+#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the CRYP interrupt.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __INTERRUPT__: CRYP interrupt.
+  * @retval None
+  */
+#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__))
+
+/**
+  * @}
+  */ 
+  
+/* Include CRYP HAL Extension module */
+#include "stm32f7xx_hal_cryp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Functions CRYP Exported Functions
+  * @{
+  */
+
+/** @addtogroup CRYP_Exported_Functions_Group1
+  * @{
+  */    
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
+/**
+  * @}
+  */ 
+
+/** @addtogroup CRYP_Exported_Functions_Group2
+  * @{
+  */  
+/* AES encryption/decryption using polling  ***********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt  *********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA  ***************************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+/**
+  * @}
+  */ 
+
+/** @addtogroup CRYP_Exported_Functions_Group3
+  * @{
+  */  
+/* DES encryption/decryption using polling  ***********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* DES encryption/decryption using interrupt  *********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* DES encryption/decryption using DMA  ***************************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+/**
+  * @}
+  */ 
+
+/** @addtogroup CRYP_Exported_Functions_Group4
+  * @{
+  */  
+/* TDES encryption/decryption using polling  **********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* TDES encryption/decryption using interrupt  ********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* TDES encryption/decryption using DMA  **************************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+/**
+  * @}
+  */ 
+
+/** @addtogroup CRYP_Exported_Functions_Group5
+  * @{
+  */  
+void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
+/**
+  * @}
+  */ 
+
+/** @addtogroup CRYP_Exported_Functions_Group6
+  * @{
+  */  
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
+/**
+  * @}
+  */ 
+
+/** @addtogroup CRYP_Exported_Functions_Group7
+  * @{
+  */  
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
+/**
+  * @}
+  */ 
+  
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CRYP_Private_Types CRYP Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Variables CRYP Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Constants CRYP Private Constants
+  * @{
+  */
+#define CRYP_FLAG_MASK  ((uint32_t)0x0000001F)
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRYP_Private_Macros CRYP Private Macros
+  * @{
+  */
+
+#define IS_CRYP_KEYSIZE(__KEYSIZE__)  (((__KEYSIZE__) == CRYP_KEYSIZE_128B)  || \
+                                       ((__KEYSIZE__) == CRYP_KEYSIZE_192B)  || \
+                                       ((__KEYSIZE__) == CRYP_KEYSIZE_256B))
+
+
+#define IS_CRYP_DATATYPE(__DATATYPE__) (((__DATATYPE__) == CRYP_DATATYPE_32B) || \
+                                        ((__DATATYPE__) == CRYP_DATATYPE_16B) || \
+                                        ((__DATATYPE__) == CRYP_DATATYPE_8B)  || \
+                                        ((__DATATYPE__) == CRYP_DATATYPE_1B))  
+
+
+ /**
+  * @}
+  */ 
+  
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Functions CRYP Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+     
+/**
+  * @}
+  */ 
+
+#endif /* STM32F756xx */
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CRYP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_cryp_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,3040 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_cryp_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Extended CRYP HAL module driver
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of CRYP extension peripheral:
+  *           + Extended AES processing functions     
+  *  
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The CRYP Extension HAL driver can be used as follows:
+    (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit():
+        (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()
+        (##) In case of using interrupts (e.g. HAL_CRYPEx_AESGCM_Encrypt_IT())
+            (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority()
+            (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ()
+            (+++) In CRYP IRQ handler, call HAL_CRYP_IRQHandler()
+        (##) In case of using DMA to control data transfer (e.g. HAL_AES_ECB_Encrypt_DMA())
+            (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+            (+++) Configure and enable two DMA streams one for managing data transfer from
+                memory to peripheral (input stream) and another stream for managing data
+                transfer from peripheral to memory (output stream)
+            (+++) Associate the initialized DMA handle to the CRYP DMA handle
+                using  __HAL_LINKDMA()
+            (+++) Configure the priority and enable the NVIC for the transfer complete
+                interrupt on the two DMA Streams. The output stream should have higher
+                priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+    (#)Initialize the CRYP HAL using HAL_CRYP_Init(). This function configures mainly:
+        (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit
+        (##) The key size: 128, 192 and 256. This parameter is relevant only for AES
+        (##) The encryption/decryption key. Its size depends on the algorithm
+                used for encryption/decryption
+        (##) The initialization vector (counter). It is not used ECB mode.
+    (#)Three processing (encryption/decryption) functions are available:
+        (##) Polling mode: encryption and decryption APIs are blocking functions
+             i.e. they process the data and wait till the processing is finished
+             e.g. HAL_CRYPEx_AESGCM_Encrypt()
+        (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+                i.e. they process the data under interrupt
+                e.g. HAL_CRYPEx_AESGCM_Encrypt_IT()
+        (##) DMA mode: encryption and decryption APIs are not blocking functions
+                i.e. the data transfer is ensured by DMA
+                e.g. HAL_CRYPEx_AESGCM_Encrypt_DMA()
+    (#)When the processing function is called at first time after HAL_CRYP_Init()
+       the CRYP peripheral is initialized and processes the buffer in input.
+       At second call, the processing function performs an append of the already
+       processed buffer.
+       When a new data block is to be processed, call HAL_CRYP_Init() then the
+       processing function.
+    (#)In AES-GCM and AES-CCM modes are an authenticated encryption algorithms
+       which provide authentication messages.
+       HAL_AES_GCM_Finish() and HAL_AES_CCM_Finish() are used to provide those
+       authentication messages.
+       Call those functions after the processing ones (polling, interrupt or DMA).
+       e.g. in AES-CCM mode call HAL_CRYPEx_AESCCM_Encrypt() to encrypt the plain data
+            then call HAL_CRYPEx_AESCCM_Finish() to get the authentication message      
+    -@- For CCM Encrypt/Decrypt API's, only DataType = 8-bit is supported by this version.       
+    -@- The HAL_CRYPEx_AESGCM_xxxx() implementation is limited to 32bits inputs data length 
+        (Plain/Cyphertext, Header) compared with GCM standards specifications (800-38D).
+    (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+#if defined (STM32F756xx)
+/** @defgroup CRYPEx CRYPEx
+  * @brief CRYP Extension HAL module driver.
+  * @{
+  */
+
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup CRYPEx_Private_define
+  * @{
+  */
+#define CRYPEx_TIMEOUT_VALUE  1
+/**
+  * @}
+  */ 
+  
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup CRYPEx_Private_Functions_prototypes  CRYP Private Functions Prototypes
+  * @{
+  */
+static void CRYPEx_GCMCCM_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector);
+static void CRYPEx_GCMCCM_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize);
+static HAL_StatusTypeDef CRYPEx_GCMCCM_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t *Input, uint16_t Ilength, uint8_t *Output, uint32_t Timeout);
+static HAL_StatusTypeDef CRYPEx_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint32_t Timeout);
+static void CRYPEx_GCMCCM_DMAInCplt(DMA_HandleTypeDef *hdma);
+static void CRYPEx_GCMCCM_DMAOutCplt(DMA_HandleTypeDef *hdma);
+static void CRYPEx_GCMCCM_DMAError(DMA_HandleTypeDef *hdma);
+static void CRYPEx_GCMCCM_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr);
+/**
+  * @}
+  */ 
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup CRYPEx_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  DMA CRYP Input Data process complete callback. 
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYPEx_GCMCCM_DMAInCplt(DMA_HandleTypeDef *hdma)  
+{
+  CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* Disable the DMA transfer for input Fifo request by resetting the DIEN bit
+     in the DMACR register */
+  hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN);
+  
+  /* Call input data transfer complete callback */
+  HAL_CRYP_InCpltCallback(hcryp);
+}
+
+/**
+  * @brief  DMA CRYP Output Data process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYPEx_GCMCCM_DMAOutCplt(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* Disable the DMA transfer for output Fifo request by resetting the DOEN bit
+     in the DMACR register */
+  hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN);
+  
+  /* Enable the CRYP peripheral */
+  __HAL_CRYP_DISABLE(hcryp);
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Call output data transfer complete callback */
+  HAL_CRYP_OutCpltCallback(hcryp);
+}
+
+/**
+  * @brief  DMA CRYP communication error callback. 
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void CRYPEx_GCMCCM_DMAError(DMA_HandleTypeDef *hdma)
+{
+  CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hcryp->State= HAL_CRYP_STATE_READY;
+  HAL_CRYP_ErrorCallback(hcryp);
+}
+
+/**
+  * @brief  Writes the Key in Key registers. 
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Key: Pointer to Key buffer
+  * @param  KeySize: Size of Key
+  * @retval None
+  */
+static void CRYPEx_GCMCCM_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize)
+{
+  uint32_t keyaddr = (uint32_t)Key;
+  
+  switch(KeySize)
+  {
+  case CRYP_KEYSIZE_256B:
+    /* Key Initialisation */
+    hcryp->Instance->K0LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K0RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  case CRYP_KEYSIZE_192B:
+    hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  case CRYP_KEYSIZE_128B:       
+    hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
+    keyaddr+=4;
+    hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
+    break;
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  Writes the InitVector/InitCounter in IV registers.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  InitVector: Pointer to InitVector/InitCounter buffer
+  * @retval None
+  */
+static void CRYPEx_GCMCCM_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector)
+{
+  uint32_t ivaddr = (uint32_t)InitVector;
+  
+  hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
+  ivaddr+=4;
+  hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
+  ivaddr+=4;
+  hcryp->Instance->IV1LR = __REV(*(uint32_t*)(ivaddr));
+  ivaddr+=4;
+  hcryp->Instance->IV1RR = __REV(*(uint32_t*)(ivaddr));
+}
+
+/**
+  * @brief  Process Data: Writes Input data in polling mode and read the Output data.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Input: Pointer to the Input buffer.
+  * @param  Ilength: Length of the Input buffer, must be a multiple of 16
+  * @param  Output: Pointer to the returned buffer
+  * @param  Timeout: Timeout value 
+  * @retval None
+  */
+static HAL_StatusTypeDef CRYPEx_GCMCCM_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t *Input, uint16_t Ilength, uint8_t *Output, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  uint32_t i = 0;
+  uint32_t inputaddr  = (uint32_t)Input;
+  uint32_t outputaddr = (uint32_t)Output;
+  
+  for(i=0; (i < Ilength); i+=16)
+  {
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    
+    /* Get tick */
+    tickstart = HAL_GetTick();
+ 
+    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /* Read the Output block from the OUT FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+  }
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets the header phase
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Input: Pointer to the Input buffer.
+  * @param  Ilength: Length of the Input buffer, must be a multiple of 16
+  * @param  Timeout: Timeout value   
+  * @retval None
+  */
+static HAL_StatusTypeDef CRYPEx_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  uint32_t loopcounter = 0;
+  uint32_t headeraddr = (uint32_t)Input;
+  
+  /***************************** Header phase *********************************/
+  if(hcryp->Init.HeaderSize != 0)
+  {
+    /* Select header phase */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    for(loopcounter = 0; (loopcounter < hcryp->Init.HeaderSize); loopcounter+=16)
+    {
+      /* Get tick */
+      tickstart = HAL_GetTick();
+      
+      while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+      {
+        /* Check for the Timeout */
+        if(Timeout != HAL_MAX_DELAY)
+        {
+          if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+            
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+            
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      /* Write the Input block in the IN FIFO */
+      hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+      headeraddr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+      headeraddr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+      headeraddr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+      headeraddr+=4;
+    }
+    
+    /* Wait until the complete message has been processed */
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets the DMA configuration and start the DMA transfer.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  inputaddr: Address of the Input buffer
+  * @param  Size: Size of the Input buffer, must be a multiple of 16
+  * @param  outputaddr: Address of the Output buffer
+  * @retval None
+  */
+static void CRYPEx_GCMCCM_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr)
+{
+  /* Set the CRYP DMA transfer complete callback */
+  hcryp->hdmain->XferCpltCallback = CRYPEx_GCMCCM_DMAInCplt;
+  /* Set the DMA error callback */
+  hcryp->hdmain->XferErrorCallback = CRYPEx_GCMCCM_DMAError;
+  
+  /* Set the CRYP DMA transfer complete callback */
+  hcryp->hdmaout->XferCpltCallback = CRYPEx_GCMCCM_DMAOutCplt;
+  /* Set the DMA error callback */
+  hcryp->hdmaout->XferErrorCallback = CRYPEx_GCMCCM_DMAError;
+  
+  /* Enable the CRYP peripheral */
+  __HAL_CRYP_ENABLE(hcryp);
+  
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DR, Size/4);
+  
+  /* Enable In DMA request */
+  hcryp->Instance->DMACR = CRYP_DMACR_DIEN;
+  
+  /* Enable the DMA Out DMA Stream */
+  HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUT, outputaddr, Size/4);
+  
+  /* Enable Out DMA request */
+  hcryp->Instance->DMACR |= CRYP_DMACR_DOEN;
+}
+
+/**
+  * @}
+  */
+
+/* Exported functions---------------------------------------------------------*/
+/** @addtogroup CRYPEx_Exported_Functions
+  * @{
+  */
+
+/** @defgroup CRYPEx_Exported_Functions_Group1 Extended AES processing functions 
+ *  @brief   Extended processing functions. 
+ *
+@verbatim   
+  ==============================================================================
+              ##### Extended AES processing functions #####
+  ==============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Encrypt plaintext using AES-128/192/256 using GCM and CCM chaining modes
+      (+) Decrypt cyphertext using AES-128/192/256 using GCM and CCM chaining modes
+      (+) Finish the processing. This function is available only for GCM and CCM
+    [..]  Three processing methods are available:
+      (+) Polling mode
+      (+) Interrupt mode
+      (+) DMA mode
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CCM encryption mode then 
+  *         encrypt pPlainData. The cypher data are available in pCypherData.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  uint32_t headersize = hcryp->Init.HeaderSize;
+  uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
+  uint32_t loopcounter = 0;
+  uint32_t bufferidx = 0;
+  uint8_t blockb0[16] = {0};/* Block B0 */
+  uint8_t ctr[16] = {0}; /* Counter */
+  uint32_t b0addr = (uint32_t)blockb0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /************************ Formatting the header block *********************/
+    if(headersize != 0)
+    {
+      /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+      if(headersize < 65280)
+      {
+        hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
+        hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
+        headersize += 2;
+      }
+      else
+      {
+        /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+        hcryp->Init.pScratch[bufferidx++] = 0xFF;
+        hcryp->Init.pScratch[bufferidx++] = 0xFE;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
+        headersize += 6;
+      }
+      /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+      for(loopcounter = 0; loopcounter < headersize; loopcounter++)
+      {
+        hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+      }
+      /* Check if the header size is modulo 16 */
+      if ((headersize % 16) != 0)
+      {
+        /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+        for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
+        {
+          hcryp->Init.pScratch[loopcounter] = 0;
+        }
+        /* Set the header size to modulo 16 */
+        headersize = ((headersize/16) + 1) * 16;
+      }
+      /* Set the pointer headeraddr to hcryp->Init.pScratch */
+      headeraddr = (uint32_t)hcryp->Init.pScratch;
+    }
+    /*********************** Formatting the block B0 **************************/
+    if(headersize != 0)
+    {
+      blockb0[0] = 0x40;
+    }
+    /* Flags byte */
+    /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
+    blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
+    blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
+ 
+    for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
+    {
+      blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
+    }
+    for ( ; loopcounter < 13; loopcounter++)
+    {
+      blockb0[loopcounter+1] = 0;
+    }
+    
+    blockb0[14] = (Size >> 8);
+    blockb0[15] = (Size & 0xFF);
+    
+    /************************* Formatting the initial counter *****************/
+    /* Byte 0:
+       Bits 7 and 6 are reserved and shall be set to 0
+       Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter blocks
+       are distinct from B0
+       Bits 0, 1, and 2 contain the same encoding of q as in B0
+    */
+    ctr[0] = blockb0[0] & 0x07;
+    /* byte 1 to NonceSize is the IV (Nonce) */
+    for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
+    {
+      ctr[loopcounter] = blockb0[loopcounter];
+    }
+    /* Set the LSB to 1 */
+    ctr[15] |= 0x01;
+    
+    /* Set the key */
+    CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+    
+    /* Set the CRYP peripheral in AES CCM mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
+    
+    /* Set the Initialization Vector */
+    CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+    
+    /* Select init phase */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+    
+    b0addr = (uint32_t)blockb0;
+    /* Write the blockb0 block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    b0addr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    b0addr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    b0addr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+        
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /***************************** Header phase *******************************/
+    if(headersize != 0)
+    {
+      /* Select header phase */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+      
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+      
+      for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+        {
+          {
+            /* Check for the Timeout */
+            if(Timeout != HAL_MAX_DELAY)
+            {
+              if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+              {
+                /* Change state */
+                hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+                
+                /* Process Unlocked */
+                __HAL_UNLOCK(hcryp);
+                
+                return HAL_TIMEOUT;
+              }
+            }
+          }
+        }
+        /* Write the header block in the IN FIFO */
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+      }
+      
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+      {
+        /* Check for the Timeout */
+        if(Timeout != HAL_MAX_DELAY)
+        {
+          if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+            
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+            
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+    /* Save formatted counter into the scratch buffer pScratch */
+    for(loopcounter = 0; (loopcounter < 16); loopcounter++)
+    {
+      hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+    }
+    /* Reset bit 0 */
+    hcryp->Init.pScratch[15] &= 0xfe;
+    
+    /* Select payload phase once the header phase is performed */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+  
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYPEx_GCMCCM_ProcessData(hcryp,pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES GCM encryption mode then 
+  *         encrypt pPlainData. The cypher data are available in pCypherData.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+    
+    /* Set the CRYP peripheral in AES GCM mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
+    
+    /* Set the Initialization Vector */
+    CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    
+    /* Set the header phase */
+    if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+    
+    /* Disable the CRYP peripheral */
+    __HAL_CRYP_DISABLE(hcryp);
+    
+    /* Select payload phase once the header phase is performed */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+  
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYPEx_GCMCCM_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES GCM decryption mode then
+  *         decrypted pCypherData. The cypher data are available in pPlainData.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the cyphertext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer 
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /* Set the key */
+    CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+    
+    /* Set the CRYP peripheral in AES GCM decryption mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
+    
+    /* Set the Initialization Vector */
+    CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    
+    /* Set the header phase */
+    if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+    /* Disable the CRYP peripheral */
+    __HAL_CRYP_DISABLE(hcryp);
+    
+    /* Select payload phase once the header phase is performed */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+    
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+  
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYPEx_GCMCCM_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Computes the authentication TAG.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  Size: Total length of the plain/cyphertext buffer
+  * @param  AuthTag: Pointer to the authentication buffer
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Finish(CRYP_HandleTypeDef *hcryp, uint32_t Size, uint8_t *AuthTag, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  uint64_t headerlength = hcryp->Init.HeaderSize * 8; /* Header length in bits */
+  uint64_t inputlength = Size * 8; /* input length in bits */
+  uint32_t tagaddr = (uint32_t)AuthTag;
+  
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_PROCESS)
+  {
+    /* Change the CRYP phase */
+    hcryp->Phase = HAL_CRYP_PHASE_FINAL;
+    
+    /* Disable CRYP to start the final phase */
+    __HAL_CRYP_DISABLE(hcryp);
+    
+    /* Select final phase */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_FINAL);
+    
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Write the number of bits in header (64 bits) followed by the number of bits
+       in the payload */
+    if(hcryp->Init.DataType == CRYP_DATATYPE_1B)
+    {
+      hcryp->Instance->DR = __RBIT(headerlength >> 32);
+      hcryp->Instance->DR = __RBIT(headerlength);
+      hcryp->Instance->DR = __RBIT(inputlength >> 32);
+      hcryp->Instance->DR = __RBIT(inputlength);
+    }
+    else if(hcryp->Init.DataType == CRYP_DATATYPE_8B)
+    {
+      hcryp->Instance->DR = __REV(headerlength >> 32);
+      hcryp->Instance->DR = __REV(headerlength);
+      hcryp->Instance->DR = __REV(inputlength >> 32);
+      hcryp->Instance->DR = __REV(inputlength);
+    }
+    else if(hcryp->Init.DataType == CRYP_DATATYPE_16B)
+    {
+      hcryp->Instance->DR = __ROR((uint32_t)(headerlength >> 32), 16);
+      hcryp->Instance->DR = __ROR((uint32_t)headerlength, 16);
+      hcryp->Instance->DR = __ROR((uint32_t)(inputlength >> 32), 16);
+      hcryp->Instance->DR = __ROR((uint32_t)inputlength, 16);
+    }
+    else if(hcryp->Init.DataType == CRYP_DATATYPE_32B)
+    {
+      hcryp->Instance->DR = (uint32_t)(headerlength >> 32);
+      hcryp->Instance->DR = (uint32_t)(headerlength);
+      hcryp->Instance->DR = (uint32_t)(inputlength >> 32);
+      hcryp->Instance->DR = (uint32_t)(inputlength);
+    }
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+        
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    
+    /* Read the Auth TAG in the IN FIFO */
+    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
+    tagaddr+=4;
+    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
+    tagaddr+=4;
+    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
+    tagaddr+=4;
+    *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
+  }
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Computes the authentication TAG for AES CCM mode.
+  * @note   This API is called after HAL_AES_CCM_Encrypt()/HAL_AES_CCM_Decrypt()   
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  AuthTag: Pointer to the authentication buffer
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Finish(CRYP_HandleTypeDef *hcryp, uint8_t *AuthTag, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  uint32_t tagaddr = (uint32_t)AuthTag;
+  uint32_t ctraddr = (uint32_t)hcryp->Init.pScratch;
+  uint32_t temptag[4] = {0}; /* Temporary TAG (MAC) */
+  uint32_t loopcounter;
+  
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_PROCESS)
+  {
+    /* Change the CRYP phase */
+    hcryp->Phase = HAL_CRYP_PHASE_FINAL;
+    
+    /* Disable CRYP to start the final phase */
+    __HAL_CRYP_DISABLE(hcryp);
+    
+    /* Select final phase */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_FINAL);
+    
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Write the counter block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)ctraddr;
+    ctraddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)ctraddr;
+    ctraddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)ctraddr;
+    ctraddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)ctraddr;
+    
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    
+    /* Read the Auth TAG in the IN FIFO */
+    temptag[0] = hcryp->Instance->DOUT;
+    temptag[1] = hcryp->Instance->DOUT;
+    temptag[2] = hcryp->Instance->DOUT;
+    temptag[3] = hcryp->Instance->DOUT;
+  }
+  
+  /* Copy temporary authentication TAG in user TAG buffer */
+  for(loopcounter = 0; loopcounter < hcryp->Init.TagSize ; loopcounter++)
+  {
+    /* Set the authentication TAG buffer */
+    *((uint8_t*)tagaddr+loopcounter) = *((uint8_t*)temptag+loopcounter);
+  }
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CCM decryption mode then
+  *         decrypted pCypherData. The cypher data are available in pPlainData.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  uint32_t headersize = hcryp->Init.HeaderSize;
+  uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
+  uint32_t loopcounter = 0;
+  uint32_t bufferidx = 0;
+  uint8_t blockb0[16] = {0};/* Block B0 */
+  uint8_t ctr[16] = {0}; /* Counter */
+  uint32_t b0addr = (uint32_t)blockb0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hcryp);
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+  {
+    /************************ Formatting the header block *********************/
+    if(headersize != 0)
+    {
+      /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+      if(headersize < 65280)
+      {
+        hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
+        hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
+        headersize += 2;
+      }
+      else
+      {
+        /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+        hcryp->Init.pScratch[bufferidx++] = 0xFF;
+        hcryp->Init.pScratch[bufferidx++] = 0xFE;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
+        hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
+        headersize += 6;
+      }
+      /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+      for(loopcounter = 0; loopcounter < headersize; loopcounter++)
+      {
+        hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+      }
+      /* Check if the header size is modulo 16 */
+      if ((headersize % 16) != 0)
+      {
+        /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+        for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
+        {
+          hcryp->Init.pScratch[loopcounter] = 0;
+        }
+        /* Set the header size to modulo 16 */
+        headersize = ((headersize/16) + 1) * 16;
+      }
+      /* Set the pointer headeraddr to hcryp->Init.pScratch */
+      headeraddr = (uint32_t)hcryp->Init.pScratch;
+    }
+    /*********************** Formatting the block B0 **************************/
+    if(headersize != 0)
+    {
+      blockb0[0] = 0x40;
+    }
+    /* Flags byte */
+    /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
+    blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
+    blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
+    
+    for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
+    {
+      blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
+    }
+    for ( ; loopcounter < 13; loopcounter++)
+    {
+      blockb0[loopcounter+1] = 0;
+    }
+    
+    blockb0[14] = (Size >> 8);
+    blockb0[15] = (Size & 0xFF);
+    
+    /************************* Formatting the initial counter *****************/
+    /* Byte 0:
+       Bits 7 and 6 are reserved and shall be set to 0
+       Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter 
+       blocks are distinct from B0
+       Bits 0, 1, and 2 contain the same encoding of q as in B0
+    */
+    ctr[0] = blockb0[0] & 0x07;
+    /* byte 1 to NonceSize is the IV (Nonce) */
+    for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
+    {
+      ctr[loopcounter] = blockb0[loopcounter];
+    }
+    /* Set the LSB to 1 */
+    ctr[15] |= 0x01;
+    
+    /* Set the key */
+    CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+    
+    /* Set the CRYP peripheral in AES CCM mode */
+    __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
+    
+    /* Set the Initialization Vector */
+    CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+    
+    /* Select init phase */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+    
+    b0addr = (uint32_t)blockb0;
+    /* Write the blockb0 block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    b0addr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    b0addr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    b0addr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(b0addr);
+    
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Get tick */
+    tickstart = HAL_GetTick();
+ 
+    while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+        
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    /***************************** Header phase *******************************/
+    if(headersize != 0)
+    {
+      /* Select header phase */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+      
+      /* Enable Crypto processor */
+      __HAL_CRYP_ENABLE(hcryp);
+      
+      for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
+      {
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+        {
+          /* Check for the Timeout */
+          if(Timeout != HAL_MAX_DELAY)
+          {
+            if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+            {
+              /* Change state */
+              hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+              
+              /* Process Unlocked */
+              __HAL_UNLOCK(hcryp);
+              
+              return HAL_TIMEOUT;
+            }
+          }
+        }
+        /* Write the header block in the IN FIFO */
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+        hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+        headeraddr+=4;
+      }
+      
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+      {
+      /* Check for the Timeout */
+        if(Timeout != HAL_MAX_DELAY)
+        {
+          if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+            
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+            
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+    /* Save formatted counter into the scratch buffer pScratch */
+    for(loopcounter = 0; (loopcounter < 16); loopcounter++)
+    {
+      hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+    }
+    /* Reset bit 0 */
+    hcryp->Init.pScratch[15] &= 0xfe;
+    /* Select payload phase once the header phase is performed */
+    __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+    
+    /* Flush FIFO */
+    __HAL_CRYP_FIFO_FLUSH(hcryp);
+    
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Set the phase */
+    hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+  }
+  
+  /* Write Plain Data and Get Cypher Data */
+  if(CRYPEx_GCMCCM_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Change the CRYP peripheral state */
+  hcryp->State = HAL_CRYP_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hcryp);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES GCM encryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t tickstart = 0;   
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    /* Get the buffer addresses and sizes */    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES GCM mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
+      
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Enable CRYP to start the init phase */
+      __HAL_CRYP_ENABLE(hcryp);
+      
+     /* Get tick */
+     tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+          
+        }
+      }
+      
+      /* Set the header phase */
+      if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      /* Disable the CRYP peripheral */
+      __HAL_CRYP_DISABLE(hcryp);
+      
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    if(Size != 0)
+    {
+      /* Enable Interrupts */
+      __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+    }
+    else
+    {
+      /* Process Locked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state and phase */
+      hcryp->State = HAL_CRYP_STATE_READY;
+    }
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP peripheral state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CCM encryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t tickstart = 0;   
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  uint32_t headersize = hcryp->Init.HeaderSize;
+  uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
+  uint32_t loopcounter = 0;
+  uint32_t bufferidx = 0;
+  uint8_t blockb0[16] = {0};/* Block B0 */
+  uint8_t ctr[16] = {0}; /* Counter */
+  uint32_t b0addr = (uint32_t)blockb0;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {    
+      /************************ Formatting the header block *******************/
+      if(headersize != 0)
+      {
+        /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+        if(headersize < 65280)
+        {
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
+          headersize += 2;
+        }
+        else
+        {
+          /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+          hcryp->Init.pScratch[bufferidx++] = 0xFF;
+          hcryp->Init.pScratch[bufferidx++] = 0xFE;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
+          headersize += 6;
+        }
+        /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+        for(loopcounter = 0; loopcounter < headersize; loopcounter++)
+        {
+          hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+        }
+        /* Check if the header size is modulo 16 */
+        if ((headersize % 16) != 0)
+        {
+          /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+          for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
+          {
+            hcryp->Init.pScratch[loopcounter] = 0;
+          }
+          /* Set the header size to modulo 16 */
+          headersize = ((headersize/16) + 1) * 16;
+        }
+        /* Set the pointer headeraddr to hcryp->Init.pScratch */
+        headeraddr = (uint32_t)hcryp->Init.pScratch;
+      }
+      /*********************** Formatting the block B0 ************************/
+      if(headersize != 0)
+      {
+        blockb0[0] = 0x40;
+      }
+      /* Flags byte */
+      /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
+      
+      for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
+      {
+        blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
+      }
+      for ( ; loopcounter < 13; loopcounter++)
+      {
+        blockb0[loopcounter+1] = 0;
+      }
+      
+      blockb0[14] = (Size >> 8);
+      blockb0[15] = (Size & 0xFF);
+      
+      /************************* Formatting the initial counter ***************/
+      /* Byte 0:
+         Bits 7 and 6 are reserved and shall be set to 0
+         Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter 
+         blocks are distinct from B0
+         Bits 0, 1, and 2 contain the same encoding of q as in B0
+      */
+      ctr[0] = blockb0[0] & 0x07;
+      /* byte 1 to NonceSize is the IV (Nonce) */
+      for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
+      {
+        ctr[loopcounter] = blockb0[loopcounter];
+      }
+      /* Set the LSB to 1 */
+      ctr[15] |= 0x01;
+      
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES CCM mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
+      
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+      
+      /* Select init phase */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+      
+      b0addr = (uint32_t)blockb0;
+      /* Write the blockb0 block in the IN FIFO */
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+      
+     /* Get tick */
+     tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+      /***************************** Header phase *****************************/
+      if(headersize != 0)
+      {
+        /* Select header phase */
+        __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+        
+        /* Enable Crypto processor */
+        __HAL_CRYP_ENABLE(hcryp);
+        
+        for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
+        {
+         /* Get tick */
+         tickstart = HAL_GetTick();
+
+          while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+          {
+            /* Check for the Timeout */
+            if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+            {
+              /* Change state */
+              hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+              
+              /* Process Unlocked */
+              __HAL_UNLOCK(hcryp);
+              
+              return HAL_TIMEOUT;
+            }
+          }
+          /* Write the header block in the IN FIFO */
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+        }
+
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+        {
+          /* Check for the Timeout */
+          if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+            
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+            
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      /* Save formatted counter into the scratch buffer pScratch */
+      for(loopcounter = 0; (loopcounter < 16); loopcounter++)
+      {
+        hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+      }
+      /* Reset bit 0 */
+      hcryp->Init.pScratch[15] &= 0xfe;
+      
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    if(Size != 0)
+    {
+      /* Enable Interrupts */
+      __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+    }
+    else
+    {
+      /* Change the CRYP state and phase */
+      hcryp->State = HAL_CRYP_STATE_READY;
+    }
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call Input transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP peripheral state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES GCM decryption mode using IT.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @param  Size: Length of the cyphertext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;   
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    /* Get the buffer addresses and sizes */    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES GCM decryption mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
+      
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Enable CRYP to start the init phase */
+      __HAL_CRYP_ENABLE(hcryp);
+
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+      
+      /* Set the header phase */
+      if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      /* Disable the CRYP peripheral */
+      __HAL_CRYP_DISABLE(hcryp);
+      
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+      
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    if(Size != 0)
+    {
+      /* Enable Interrupts */
+      __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+    }
+    else
+    {
+      /* Process Locked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP state and phase */
+      hcryp->State = HAL_CRYP_STATE_READY;
+    }
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP peripheral state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CCM decryption mode using interrupt
+  *         then decrypted pCypherData. The cypher data are available in pPlainData.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer 
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  uint32_t tickstart = 0;
+  uint32_t headersize = hcryp->Init.HeaderSize;
+  uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
+  uint32_t loopcounter = 0;
+  uint32_t bufferidx = 0;
+  uint8_t blockb0[16] = {0};/* Block B0 */
+  uint8_t ctr[16] = {0}; /* Counter */
+  uint32_t b0addr = (uint32_t)blockb0;
+  
+  if(hcryp->State == HAL_CRYP_STATE_READY)
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /************************ Formatting the header block *******************/
+      if(headersize != 0)
+      {
+        /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+        if(headersize < 65280)
+        {
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
+          headersize += 2;
+        }
+        else
+        {
+          /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+          hcryp->Init.pScratch[bufferidx++] = 0xFF;
+          hcryp->Init.pScratch[bufferidx++] = 0xFE;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
+          headersize += 6;
+        }
+        /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+        for(loopcounter = 0; loopcounter < headersize; loopcounter++)
+        {
+          hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+        }
+        /* Check if the header size is modulo 16 */
+        if ((headersize % 16) != 0)
+        {
+          /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+          for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
+          {
+            hcryp->Init.pScratch[loopcounter] = 0;
+          }
+          /* Set the header size to modulo 16 */
+          headersize = ((headersize/16) + 1) * 16;
+        }
+        /* Set the pointer headeraddr to hcryp->Init.pScratch */
+        headeraddr = (uint32_t)hcryp->Init.pScratch;
+      }
+      /*********************** Formatting the block B0 ************************/
+      if(headersize != 0)
+      {
+        blockb0[0] = 0x40;
+      }
+      /* Flags byte */
+      /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
+      
+      for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
+      {
+        blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
+      }
+      for ( ; loopcounter < 13; loopcounter++)
+      {
+        blockb0[loopcounter+1] = 0;
+      }
+      
+      blockb0[14] = (Size >> 8);
+      blockb0[15] = (Size & 0xFF);
+      
+      /************************* Formatting the initial counter ***************/
+      /* Byte 0:
+         Bits 7 and 6 are reserved and shall be set to 0
+         Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter 
+         blocks are distinct from B0
+         Bits 0, 1, and 2 contain the same encoding of q as in B0
+      */
+      ctr[0] = blockb0[0] & 0x07;
+      /* byte 1 to NonceSize is the IV (Nonce) */
+      for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
+      {
+        ctr[loopcounter] = blockb0[loopcounter];
+      }
+      /* Set the LSB to 1 */
+      ctr[15] |= 0x01;
+      
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES CCM mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
+      
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+      
+      /* Select init phase */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+      
+      b0addr = (uint32_t)blockb0;
+      /* Write the blockb0 block in the IN FIFO */
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+      /***************************** Header phase *****************************/
+      if(headersize != 0)
+      {
+        /* Select header phase */
+        __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+        
+        /* Enable Crypto processor */
+        __HAL_CRYP_ENABLE(hcryp);
+        
+        for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
+        {
+         /* Get tick */
+         tickstart = HAL_GetTick();
+
+          while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+          {
+            /* Check for the Timeout */
+            if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+            {
+              /* Change state */
+              hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+              
+              /* Process Unlocked */
+              __HAL_UNLOCK(hcryp);
+              
+              return HAL_TIMEOUT;
+            }
+          }
+          /* Write the header block in the IN FIFO */
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+        }
+
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+        {
+          /* Check for the Timeout */
+          if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+            
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+            
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      /* Save formatted counter into the scratch buffer pScratch */
+      for(loopcounter = 0; (loopcounter < 16); loopcounter++)
+      {
+        hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+      }
+      /* Reset bit 0 */
+      hcryp->Init.pScratch[15] &= 0xfe;
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    /* Enable Interrupts */
+    __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
+    
+    /* Enable the CRYP peripheral */
+    __HAL_CRYP_ENABLE(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
+  {
+    inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
+    /* Write the Input block in the IN FIFO */
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR  = *(uint32_t*)(inputaddr);
+    inputaddr+=4;
+    hcryp->Instance->DR = *(uint32_t*)(inputaddr);
+    hcryp->pCrypInBuffPtr += 16;
+    hcryp->CrypInCount -= 16;
+    if(hcryp->CrypInCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
+      /* Call the Input data transfer complete callback */
+      HAL_CRYP_InCpltCallback(hcryp);
+    }
+  }
+  else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
+  {
+    outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
+    hcryp->pCrypOutBuffPtr += 16;
+    hcryp->CrypOutCount -= 16;
+    if(hcryp->CrypOutCount == 0)
+    {
+      __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hcryp);
+      /* Change the CRYP peripheral state */
+      hcryp->State = HAL_CRYP_STATE_READY;
+      /* Call Input transfer complete callback */
+      HAL_CRYP_OutCpltCallback(hcryp);
+    }
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES GCM encryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t tickstart = 0;
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+    
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES GCM mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
+      
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Enable CRYP to start the init phase */
+      __HAL_CRYP_ENABLE(hcryp);
+      
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Set the header phase */
+      if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      /* Disable the CRYP peripheral */
+      __HAL_CRYP_DISABLE(hcryp);
+      
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Unlock process */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CCM encryption mode using interrupt.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pCypherData: Pointer to the cyphertext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
+{
+  uint32_t tickstart = 0;   
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  uint32_t headersize;
+  uint32_t headeraddr;
+  uint32_t loopcounter = 0;
+  uint32_t bufferidx = 0;
+  uint8_t blockb0[16] = {0};/* Block B0 */
+  uint8_t ctr[16] = {0}; /* Counter */
+  uint32_t b0addr = (uint32_t)blockb0;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pPlainData;
+    outputaddr = (uint32_t)pCypherData;
+    
+    headersize = hcryp->Init.HeaderSize;
+    headeraddr = (uint32_t)hcryp->Init.Header;
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pPlainData;
+    hcryp->pCrypOutBuffPtr = pCypherData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /************************ Formatting the header block *******************/
+      if(headersize != 0)
+      {
+        /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+        if(headersize < 65280)
+        {
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
+          headersize += 2;
+        }
+        else
+        {
+          /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+          hcryp->Init.pScratch[bufferidx++] = 0xFF;
+          hcryp->Init.pScratch[bufferidx++] = 0xFE;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
+          headersize += 6;
+        }
+        /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+        for(loopcounter = 0; loopcounter < headersize; loopcounter++)
+        {
+          hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+        }
+        /* Check if the header size is modulo 16 */
+        if ((headersize % 16) != 0)
+        {
+          /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+          for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
+          {
+            hcryp->Init.pScratch[loopcounter] = 0;
+          }
+          /* Set the header size to modulo 16 */
+          headersize = ((headersize/16) + 1) * 16;
+        }
+        /* Set the pointer headeraddr to hcryp->Init.pScratch */
+        headeraddr = (uint32_t)hcryp->Init.pScratch;
+      }
+      /*********************** Formatting the block B0 ************************/
+      if(headersize != 0)
+      {
+        blockb0[0] = 0x40;
+      }
+      /* Flags byte */
+      /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
+      
+      for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
+      {
+        blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
+      }
+      for ( ; loopcounter < 13; loopcounter++)
+      {
+        blockb0[loopcounter+1] = 0;
+      }
+      
+      blockb0[14] = (Size >> 8);
+      blockb0[15] = (Size & 0xFF);
+      
+      /************************* Formatting the initial counter ***************/
+      /* Byte 0:
+         Bits 7 and 6 are reserved and shall be set to 0
+         Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter 
+         blocks are distinct from B0
+         Bits 0, 1, and 2 contain the same encoding of q as in B0
+      */
+      ctr[0] = blockb0[0] & 0x07;
+      /* byte 1 to NonceSize is the IV (Nonce) */
+      for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
+      {
+        ctr[loopcounter] = blockb0[loopcounter];
+      }
+      /* Set the LSB to 1 */
+      ctr[15] |= 0x01;
+      
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES CCM mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
+      
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+      
+      /* Select init phase */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+      
+      b0addr = (uint32_t)blockb0;
+      /* Write the blockb0 block in the IN FIFO */
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+      
+      /* Get tick */
+      tickstart = HAL_GetTick();
+ 
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+      /***************************** Header phase *****************************/
+      if(headersize != 0)
+      {
+        /* Select header phase */
+        __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+        
+        /* Enable Crypto processor */
+        __HAL_CRYP_ENABLE(hcryp);
+        
+        for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
+        {
+         /* Get tick */
+         tickstart = HAL_GetTick();
+
+          while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+          {
+            /* Check for the Timeout */
+            if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+            {
+              /* Change state */
+              hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+              
+              /* Process Unlocked */
+              __HAL_UNLOCK(hcryp);
+              
+              return HAL_TIMEOUT;
+            }
+          }
+          /* Write the header block in the IN FIFO */
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+        }
+        
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+        {
+          /* Check for the Timeout */
+          if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+            
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+            
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      /* Save formatted counter into the scratch buffer pScratch */
+      for(loopcounter = 0; (loopcounter < 16); loopcounter++)
+      {
+        hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+      }
+      /* Reset bit 0 */
+      hcryp->Init.pScratch[15] &= 0xfe;
+      
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Unlock process */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES GCM decryption mode using DMA.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer.
+  * @param  Size: Length of the cyphertext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;   
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+    
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES GCM decryption mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
+      
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
+      
+      /* Enable CRYP to start the init phase */
+      __HAL_CRYP_ENABLE(hcryp);
+      
+      /* Get tick */
+      tickstart = HAL_GetTick();
+
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+      
+      /* Set the header phase */
+      if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      /* Disable the CRYP peripheral */
+      __HAL_CRYP_DISABLE(hcryp);
+      
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+      
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Unlock process */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @brief  Initializes the CRYP peripheral in AES CCM decryption mode using DMA
+  *         then decrypted pCypherData. The cypher data are available in pPlainData.
+  * @param  hcryp: pointer to a CRYP_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @param  pCypherData: Pointer to the cyphertext buffer  
+  * @param  Size: Length of the plaintext buffer, must be a multiple of 16
+  * @param  pPlainData: Pointer to the plaintext buffer  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
+{
+  uint32_t tickstart = 0;   
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  uint32_t headersize;
+  uint32_t headeraddr;
+  uint32_t loopcounter = 0;
+  uint32_t bufferidx = 0;
+  uint8_t blockb0[16] = {0};/* Block B0 */
+  uint8_t ctr[16] = {0}; /* Counter */
+  uint32_t b0addr = (uint32_t)blockb0;
+  
+  if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
+  {
+    /* Process Locked */
+    __HAL_LOCK(hcryp);
+    
+    inputaddr  = (uint32_t)pCypherData;
+    outputaddr = (uint32_t)pPlainData;
+    
+    headersize = hcryp->Init.HeaderSize;
+    headeraddr = (uint32_t)hcryp->Init.Header;
+    
+    hcryp->CrypInCount = Size;
+    hcryp->pCrypInBuffPtr = pCypherData;
+    hcryp->pCrypOutBuffPtr = pPlainData;
+    hcryp->CrypOutCount = Size;
+    
+    /* Change the CRYP peripheral state */
+    hcryp->State = HAL_CRYP_STATE_BUSY;
+    
+    /* Check if initialization phase has already been performed */
+    if(hcryp->Phase == HAL_CRYP_PHASE_READY)
+    {
+      /************************ Formatting the header block *******************/
+      if(headersize != 0)
+      {
+        /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
+        if(headersize < 65280)
+        {
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
+          hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
+          headersize += 2;
+        }
+        else
+        {
+          /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
+          hcryp->Init.pScratch[bufferidx++] = 0xFF;
+          hcryp->Init.pScratch[bufferidx++] = 0xFE;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
+          hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
+          headersize += 6;
+        }
+        /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
+        for(loopcounter = 0; loopcounter < headersize; loopcounter++)
+        {
+          hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
+        }
+        /* Check if the header size is modulo 16 */
+        if ((headersize % 16) != 0)
+        {
+          /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
+          for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
+          {
+            hcryp->Init.pScratch[loopcounter] = 0;
+          }
+          /* Set the header size to modulo 16 */
+          headersize = ((headersize/16) + 1) * 16;
+        }
+        /* Set the pointer headeraddr to hcryp->Init.pScratch */
+        headeraddr = (uint32_t)hcryp->Init.pScratch;
+      }
+      /*********************** Formatting the block B0 ************************/
+      if(headersize != 0)
+      {
+        blockb0[0] = 0x40;
+      }
+      /* Flags byte */
+      /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
+      blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
+      
+      for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
+      {
+        blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
+      }
+      for ( ; loopcounter < 13; loopcounter++)
+      {
+        blockb0[loopcounter+1] = 0;
+      }
+      
+      blockb0[14] = (Size >> 8);
+      blockb0[15] = (Size & 0xFF);
+      
+      /************************* Formatting the initial counter ***************/
+      /* Byte 0:
+         Bits 7 and 6 are reserved and shall be set to 0
+         Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter 
+         blocks are distinct from B0
+         Bits 0, 1, and 2 contain the same encoding of q as in B0
+      */
+      ctr[0] = blockb0[0] & 0x07;
+      /* byte 1 to NonceSize is the IV (Nonce) */
+      for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
+      {
+        ctr[loopcounter] = blockb0[loopcounter];
+      }
+      /* Set the LSB to 1 */
+      ctr[15] |= 0x01;
+      
+      /* Set the key */
+      CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
+      
+      /* Set the CRYP peripheral in AES CCM mode */
+      __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
+      
+      /* Set the Initialization Vector */
+      CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
+      
+      /* Select init phase */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
+      
+      b0addr = (uint32_t)blockb0;
+      /* Write the blockb0 block in the IN FIFO */
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      b0addr+=4;
+      hcryp->Instance->DR = *(uint32_t*)(b0addr);
+      
+      /* Enable the CRYP peripheral */
+      __HAL_CRYP_ENABLE(hcryp);
+      
+      /* Get tick */
+      tickstart = HAL_GetTick();
+ 
+      while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
+      {
+        /* Check for the Timeout */
+        
+        if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+        {
+          /* Change state */
+          hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hcryp);
+          
+          return HAL_TIMEOUT;
+          
+        }
+      }
+      /***************************** Header phase *****************************/
+      if(headersize != 0)
+      {
+        /* Select header phase */
+        __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
+        
+        /* Enable Crypto processor */
+        __HAL_CRYP_ENABLE(hcryp);
+        
+        for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
+        {
+         /* Get tick */
+         tickstart = HAL_GetTick();
+ 
+          while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
+          {
+            /* Check for the Timeout */
+            if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+            {
+              /* Change state */
+              hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+              
+              /* Process Unlocked */
+              __HAL_UNLOCK(hcryp);
+              
+              return HAL_TIMEOUT;
+            }
+          }
+          /* Write the header block in the IN FIFO */
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+          hcryp->Instance->DR = *(uint32_t*)(headeraddr);
+          headeraddr+=4;
+        }
+        
+        /* Get tick */
+        tickstart = HAL_GetTick();
+
+        while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
+        {
+          /* Check for the Timeout */
+          if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
+          {
+            /* Change state */
+            hcryp->State = HAL_CRYP_STATE_TIMEOUT;
+            
+            /* Process Unlocked */
+            __HAL_UNLOCK(hcryp);
+            
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      /* Save formatted counter into the scratch buffer pScratch */
+      for(loopcounter = 0; (loopcounter < 16); loopcounter++)
+      {
+        hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
+      }
+      /* Reset bit 0 */
+      hcryp->Init.pScratch[15] &= 0xfe;
+      /* Select payload phase once the header phase is performed */
+      __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
+      
+      /* Flush FIFO */
+      __HAL_CRYP_FIFO_FLUSH(hcryp);
+      
+      /* Set the phase */
+      hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
+    }
+    /* Set the input and output addresses and start DMA transfer */ 
+    CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
+    
+    /* Unlock process */
+    __HAL_UNLOCK(hcryp);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;   
+  }
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup CRYPEx_Exported_Functions_Group2 CRYPEx IRQ handler management  
+ *  @brief   CRYPEx IRQ handler.
+ *
+@verbatim   
+  ==============================================================================
+                ##### CRYPEx IRQ handler management #####
+  ==============================================================================  
+[..]  This section provides CRYPEx IRQ handler function.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function handles CRYPEx interrupt request.
+  * @param  hcryp: pointer to a CRYPEx_HandleTypeDef structure that contains
+  *         the configuration information for CRYP module
+  * @retval None
+  */
+void HAL_CRYPEx_GCMCCM_IRQHandler(CRYP_HandleTypeDef *hcryp)
+{
+  switch(CRYP->CR & CRYP_CR_ALGOMODE_DIRECTION)
+  {    
+  case CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT:
+    HAL_CRYPEx_AESGCM_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_AES_GCM_DECRYPT:
+    HAL_CRYPEx_AESGCM_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT:
+    HAL_CRYPEx_AESCCM_Encrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  case CRYP_CR_ALGOMODE_AES_CCM_DECRYPT:
+    HAL_CRYPEx_AESCCM_Decrypt_IT(hcryp, NULL, 0, NULL);
+    break;
+    
+  default:
+    break;
+  }
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+#endif /* STM32F756xx */
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_cryp_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,221 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_cryp_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of CRYP HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CRYP_EX_H
+#define __STM32F7xx_HAL_CRYP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined (STM32F756xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup CRYPEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+/* Exported constants --------------------------------------------------------*/
+   
+/** @defgroup CRYPEx_Exported_Constants   CRYPEx Exported Constants
+  * @{
+  */
+
+/** @defgroup CRYPEx_Exported_Constants_Group1 CRYP AlgoModeDirection
+  * @{
+  */ 
+#define CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT   ((uint32_t)0x00080000)
+#define CRYP_CR_ALGOMODE_AES_GCM_DECRYPT   ((uint32_t)0x00080004)
+#define CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT   ((uint32_t)0x00080008)
+#define CRYP_CR_ALGOMODE_AES_CCM_DECRYPT   ((uint32_t)0x0008000C)
+/**
+  * @}
+  */
+
+/** @defgroup CRYPEx_Exported_Constants_Group3 CRYP PhaseConfig
+  * @brief    The phases are relevant only to AES-GCM and AES-CCM
+  * @{
+  */ 
+#define CRYP_PHASE_INIT           ((uint32_t)0x00000000)
+#define CRYP_PHASE_HEADER         CRYP_CR_GCM_CCMPH_0
+#define CRYP_PHASE_PAYLOAD        CRYP_CR_GCM_CCMPH_1
+#define CRYP_PHASE_FINAL          CRYP_CR_GCM_CCMPH
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRYPEx_Exported_Macros CRYP Exported Macros
+  * @{
+  */
+  
+/**
+  * @brief  Set the phase: Init, header, payload, final. 
+  *         This is relevant only for GCM and CCM modes.
+  * @param  __HANDLE__: specifies the CRYP handle.
+  * @param  __PHASE__: The phase.
+  * @retval None
+  */
+#define __HAL_CRYP_SET_PHASE(__HANDLE__, __PHASE__)  do{(__HANDLE__)->Instance->CR &= (uint32_t)(~CRYP_CR_GCM_CCMPH);\
+                                                        (__HANDLE__)->Instance->CR |= (uint32_t)(__PHASE__);\
+                                                       }while(0)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRYPEx_Exported_Functions CRYPEx Exported Functions
+  * @{
+  */
+
+/** @addtogroup CRYPEx_Exported_Functions_Group1
+  * @{
+  */  
+    
+/* AES encryption/decryption using polling  ***********************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Finish(CRYP_HandleTypeDef *hcryp, uint32_t Size, uint8_t *AuthTag, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Finish(CRYP_HandleTypeDef *hcryp, uint8_t *AuthTag, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt  *********************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA  ***************************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/**
+  * @}
+  */ 
+  
+/** @addtogroup CRYPEx_Exported_Functions_Group2
+  * @{
+  */  
+    
+void HAL_CRYPEx_GCMCCM_IRQHandler(CRYP_HandleTypeDef *hcryp);
+
+/**
+  * @}
+  */ 
+ 
+ /**
+  * @}
+  */ 
+ 
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Types CRYPEx Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Variables CRYPEx Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Constants CRYPEx Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Macros CRYPEx Private Macros
+  * @{
+  */
+
+ /**
+  * @}
+  */ 
+  
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Functions CRYPEx Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+   
+/**
+  * @}
+  */ 
+
+#endif /* STM32F756xx */
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CRYP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dac.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,967 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dac.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   DAC HAL module driver.
+  *         This file provides firmware functions to manage the following 
+  *         functionalities of the Digital to Analog Converter (DAC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *           + Peripheral State and Errors functions      
+  *     
+  *
+  @verbatim      
+  ==============================================================================
+                      ##### DAC Peripheral features #####
+  ==============================================================================
+    [..]        
+      *** DAC Channels ***
+      ====================  
+    [..]  
+    The device integrates two 12-bit Digital Analog Converters that can 
+    be used independently or simultaneously (dual mode):
+      (#) DAC channel1 with DAC_OUT1 (PA4) as output
+      (#) DAC channel2 with DAC_OUT2 (PA5) as output
+      
+      *** DAC Triggers ***
+      ====================
+    [..]
+    Digital to Analog conversion can be non-triggered using DAC_TRIGGER_NONE
+    and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register. 
+    [..] 
+    Digital to Analog conversion can be triggered by:
+      (#) External event: EXTI Line 9 (any GPIOx_Pin9) using DAC_TRIGGER_EXT_IT9.
+          The used pin (GPIOx_Pin9) must be configured in input mode.
+  
+      (#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8 
+          (DAC_TRIGGER_T2_TRGO, DAC_TRIGGER_T4_TRGO...)
+  
+      (#) Software using DAC_TRIGGER_SOFTWARE
+  
+      *** DAC Buffer mode feature ***
+      =============================== 
+      [..] 
+      Each DAC channel integrates an output buffer that can be used to 
+      reduce the output impedance, and to drive external loads directly
+      without having to add an external operational amplifier.
+      To enable, the output buffer use  
+      sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+      [..]           
+      (@) Refer to the device datasheet for more details about output 
+          impedance value with and without output buffer.
+            
+       *** DAC wave generation feature ***
+       =================================== 
+       [..]     
+       Both DAC channels can be used to generate
+         (#) Noise wave using HAL_DACEx_NoiseWaveGenerate() 
+         (#) Triangle wave using HAL_DACEx_TriangleWaveGenerate()
+            
+       *** DAC data format ***
+       =======================
+       [..]   
+       The DAC data format can be:
+         (#) 8-bit right alignment using DAC_ALIGN_8B_R
+         (#) 12-bit left alignment using DAC_ALIGN_12B_L
+         (#) 12-bit right alignment using DAC_ALIGN_12B_R
+  
+       *** DAC data value to voltage correspondence ***  
+       ================================================ 
+       [..] 
+       The analog output voltage on each DAC channel pin is determined
+       by the following equation: 
+       DAC_OUTx = VREF+ * DOR / 4095
+       with  DOR is the Data Output Register
+          VEF+ is the input voltage reference (refer to the device datasheet)
+        e.g. To set DAC_OUT1 to 0.7V, use
+          Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V
+  
+       *** DMA requests  ***
+       =====================
+       [..]    
+       A DMA1 request can be generated when an external trigger (but not
+       a software trigger) occurs if DMA1 requests are enabled using
+       HAL_DAC_Start_DMA()
+       [..]
+       DMA1 requests are mapped as following:
+         (#) DAC channel1 : mapped on DMA1 Stream5 channel7 which must be 
+             already configured
+         (#) DAC channel2 : mapped on DMA1 Stream6 channel7 which must be 
+             already configured
+       
+    -@- For Dual mode and specific signal (Triangle and noise) generation please 
+        refer to Extension Features Driver description        
+  
+      
+                      ##### How to use this driver #####
+  ==============================================================================
+    [..]          
+      (+) DAC APB clock must be enabled to get write access to DAC
+          registers using HAL_DAC_Init()
+      (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode.
+      (+) Configure the DAC channel using HAL_DAC_ConfigChannel() function.
+      (+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA functions
+
+     *** Polling mode IO operation ***
+     =================================
+     [..]    
+       (+) Start the DAC peripheral using HAL_DAC_Start() 
+       (+) To read the DAC last data output value, use the HAL_DAC_GetValue() function.
+       (+) Stop the DAC peripheral using HAL_DAC_Stop()
+
+	   
+     *** DMA mode IO operation ***    
+     ==============================
+     [..]    
+       (+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length 
+           of data to be transferred at each end of conversion 
+       (+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1()or HAL_DAC_ConvCpltCallbackCh2()  
+           function is executed and user can add his own code by customization of function pointer 
+           HAL_DAC_ConvCpltCallbackCh1 or HAL_DAC_ConvCpltCallbackCh2
+       (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can 
+            add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1
+       (+) Stop the DAC peripheral using HAL_DAC_Stop_DMA()
+
+                    
+     *** DAC HAL driver macros list ***
+     ============================================= 
+     [..]
+       Below the list of most used macros in DAC HAL driver.
+       
+      (+) __HAL_DAC_ENABLE : Enable the DAC peripheral
+      (+) __HAL_DAC_DISABLE : Disable the DAC peripheral
+      (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags
+      (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status
+      
+     [..]
+      (@) You can refer to the DAC HAL driver header file for more useful macros  
+   
+ @endverbatim    
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DAC DAC
+  * @brief DAC driver modules
+  * @{
+  */ 
+
+#ifdef HAL_DAC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup DAC_Private_Functions
+  * @{
+  */
+/* Private function prototypes -----------------------------------------------*/
+static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma);
+static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma);
+static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma); 
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DAC_Exported_Functions DAC Exported Functions
+  * @{
+  */
+
+/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the DAC. 
+      (+) De-initialize the DAC. 
+         
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the DAC peripheral according to the specified parameters
+  *         in the DAC_InitStruct.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac)
+{ 
+  /* Check DAC handle */
+  if(hdac == NULL)
+  {
+     return HAL_ERROR;
+  }
+  /* Check the parameters */
+  assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
+  
+  if(hdac->State == HAL_DAC_STATE_RESET)
+  { 
+    /* Allocate lock resource and initialize it */
+    hdac->Lock = HAL_UNLOCKED; 
+    /* Init the low level hardware */
+    HAL_DAC_MspInit(hdac);
+  }
+  
+  /* Initialize the DAC state*/
+  hdac->State = HAL_DAC_STATE_BUSY;
+  
+  /* Set DAC error code to none */
+  hdac->ErrorCode = HAL_DAC_ERROR_NONE;
+  
+  /* Initialize the DAC state*/
+  hdac->State = HAL_DAC_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deinitializes the DAC peripheral registers to their default reset values.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac)
+{
+  /* Check DAC handle */
+  if(hdac == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_BUSY;
+
+  /* DeInit the low level hardware */
+  HAL_DAC_MspDeInit(hdac);
+
+  /* Set DAC error code to none */
+  hdac->ErrorCode = HAL_DAC_ERROR_NONE;
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hdac);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DAC MSP.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdac);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  DeInitializes the DAC MSP.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.  
+  * @retval None
+  */
+__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdac);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Exported_Functions_Group2 IO operation functions
+ *  @brief    IO operation functions 
+ *
+@verbatim   
+  ==============================================================================
+             ##### IO operation functions #####
+  ==============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Start conversion.
+      (+) Stop conversion.
+      (+) Start conversion and enable DMA transfer.
+      (+) Stop conversion and disable DMA transfer.
+      (+) Get result of conversion.
+                     
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables DAC and starts conversion of channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel. 
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+  uint32_t tmp1 = 0, tmp2 = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+  
+  /* Process locked */
+  __HAL_LOCK(hdac);
+  
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_BUSY;
+  
+  /* Enable the Peripheral */
+  __HAL_DAC_ENABLE(hdac, Channel);
+  
+  if(Channel == DAC_CHANNEL_1)
+  {
+    tmp1 = hdac->Instance->CR & DAC_CR_TEN1;
+    tmp2 = hdac->Instance->CR & DAC_CR_TSEL1;
+    /* Check if software trigger enabled */
+    if((tmp1 ==  DAC_CR_TEN1) && (tmp2 ==  DAC_CR_TSEL1))
+    {
+      /* Enable the selected DAC software conversion */
+      hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1;
+    }
+  }
+  else
+  {
+    tmp1 = hdac->Instance->CR & DAC_CR_TEN2;
+    tmp2 = hdac->Instance->CR & DAC_CR_TSEL2;    
+    /* Check if software trigger enabled */
+    if((tmp1 == DAC_CR_TEN2) && (tmp2 == DAC_CR_TSEL2))
+    {
+      /* Enable the selected DAC software conversion*/
+      hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG2;
+    }
+  }
+  
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hdac);
+    
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables DAC and stop conversion of channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel. 
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+  
+  /* Disable the Peripheral */
+  __HAL_DAC_DISABLE(hdac, Channel);
+  
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables DAC and starts conversion of channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel. 
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @param  pData: The destination peripheral Buffer address.
+  * @param  Length: The length of data to be transferred from memory to DAC peripheral
+  * @param  Alignment: Specifies the data alignment for DAC channel.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+  *            @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+  *            @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment)
+{
+  uint32_t tmpreg = 0;
+    
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+  assert_param(IS_DAC_ALIGN(Alignment));
+  
+  /* Process locked */
+  __HAL_LOCK(hdac);
+  
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_BUSY;
+
+  if(Channel == DAC_CHANNEL_1)
+  {
+    /* Set the DMA transfer complete callback for channel1 */
+    hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1;
+
+    /* Set the DMA half transfer complete callback for channel1 */
+    hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1;
+
+    /* Set the DMA error callback for channel1 */
+    hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1;
+
+    /* Enable the selected DAC channel1 DMA request */
+    hdac->Instance->CR |= DAC_CR_DMAEN1;
+    
+    /* Case of use of channel 1 */
+    switch(Alignment)
+    {
+      case DAC_ALIGN_12B_R:
+        /* Get DHR12R1 address */
+        tmpreg = (uint32_t)&hdac->Instance->DHR12R1;
+        break;
+      case DAC_ALIGN_12B_L:
+        /* Get DHR12L1 address */
+        tmpreg = (uint32_t)&hdac->Instance->DHR12L1;
+        break;
+      case DAC_ALIGN_8B_R:
+        /* Get DHR8R1 address */
+        tmpreg = (uint32_t)&hdac->Instance->DHR8R1;
+        break;
+      default:
+        break;
+    }
+  }
+  else
+  {
+    /* Set the DMA transfer complete callback for channel2 */
+    hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2;
+
+    /* Set the DMA half transfer complete callback for channel2 */
+    hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2;
+
+    /* Set the DMA error callback for channel2 */
+    hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2;
+
+    /* Enable the selected DAC channel2 DMA request */
+    hdac->Instance->CR |= DAC_CR_DMAEN2;
+
+    /* Case of use of channel 2 */
+    switch(Alignment)
+    {
+      case DAC_ALIGN_12B_R:
+        /* Get DHR12R2 address */
+        tmpreg = (uint32_t)&hdac->Instance->DHR12R2;
+        break;
+      case DAC_ALIGN_12B_L:
+        /* Get DHR12L2 address */
+        tmpreg = (uint32_t)&hdac->Instance->DHR12L2;
+        break;
+      case DAC_ALIGN_8B_R:
+        /* Get DHR8R2 address */
+        tmpreg = (uint32_t)&hdac->Instance->DHR8R2;
+        break;
+      default:
+        break;
+    }
+  }
+  
+  /* Enable the DMA Stream */
+  if(Channel == DAC_CHANNEL_1)
+  {
+    /* Enable the DAC DMA underrun interrupt */
+    __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
+    
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
+  } 
+  else
+  {
+    /* Enable the DAC DMA underrun interrupt */
+    __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2);
+    
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length);
+  }
+  
+  /* Enable the Peripheral */
+  __HAL_DAC_ENABLE(hdac, Channel);
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdac);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables DAC and stop conversion of channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel. 
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+  
+  /* Disable the selected DAC channel DMA request */
+   hdac->Instance->CR &= ~(DAC_CR_DMAEN1 << Channel);
+    
+  /* Disable the Peripheral */
+  __HAL_DAC_DISABLE(hdac, Channel);
+  
+  /* Disable the DMA Channel */
+  /* Channel1 is used */
+  if(Channel == DAC_CHANNEL_1)
+  { 
+    status = HAL_DMA_Abort(hdac->DMA_Handle1);
+  }
+  else /* Channel2 is used for */
+  { 
+    status = HAL_DMA_Abort(hdac->DMA_Handle2); 
+  }
+
+  /* Check if DMA Channel effectively disabled */
+  if(status != HAL_OK)
+  {
+    /* Update DAC state machine to error */
+    hdac->State = HAL_DAC_STATE_ERROR;      
+  }
+  else
+  {
+    /* Change DAC state */
+    hdac->State = HAL_DAC_STATE_READY;
+  }
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief  Returns the last data output value of the selected DAC channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel. 
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @retval The selected DAC channel data output value.
+  */
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+  
+  /* Returns the DAC channel data output register value */
+  if(Channel == DAC_CHANNEL_1)
+  {
+    return hdac->Instance->DOR1;
+  }
+  else
+  {
+    return hdac->Instance->DOR2;
+  }
+}
+
+/**
+  * @brief  Handles DAC interrupt request  
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac)
+{
+  /* Check underrun channel 1 flag */
+  if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1))
+  {
+    /* Change DAC state to error state */
+    hdac->State = HAL_DAC_STATE_ERROR;
+    
+    /* Set DAC error code to channel1 DMA underrun error */
+    hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH1;
+    
+    /* Clear the underrun flag */
+    __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR1);
+    
+    /* Disable the selected DAC channel1 DMA request */
+    hdac->Instance->CR &= ~DAC_CR_DMAEN1;
+    
+    /* Error callback */ 
+    HAL_DAC_DMAUnderrunCallbackCh1(hdac);
+  }
+  /* Check underrun channel 2 flag */
+  if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR2))
+  {
+    /* Change DAC state to error state */
+    hdac->State = HAL_DAC_STATE_ERROR;
+    
+    /* Set DAC error code to channel2 DMA underrun error */
+    hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH2;
+    
+    /* Clear the underrun flag */
+    __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR2);
+    
+    /* Disable the selected DAC channel1 DMA request */
+    hdac->Instance->CR &= ~DAC_CR_DMAEN2;
+    
+    /* Error callback */ 
+    HAL_DACEx_DMAUnderrunCallbackCh2(hdac);
+  }
+}
+
+/**
+  * @brief  Conversion complete callback in non blocking mode for Channel1 
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdac);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_ConvCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Conversion half DMA transfer callback in non blocking mode for Channel1 
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdac);
+   
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Error DAC callback for Channel1.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdac);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_ErrorCallbackCh1 could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DMA underrun DAC callback for channel1.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdac);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief   	Peripheral Control functions 
+ *
+@verbatim   
+  ==============================================================================
+             ##### Peripheral Control functions #####
+  ==============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Configure channels. 
+      (+) Set the specified data holding register value for DAC channel.
+      
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configures the selected DAC channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  sConfig: DAC configuration structure.
+  * @param  Channel: The selected DAC channel. 
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel)
+{
+  uint32_t tmpreg1 = 0, tmpreg2 = 0;
+
+  /* Check the DAC parameters */
+  assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
+  assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer));
+  assert_param(IS_DAC_CHANNEL(Channel));
+  
+  /* Process locked */
+  __HAL_LOCK(hdac);
+  
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_BUSY;
+  
+  /* Get the DAC CR value */
+  tmpreg1 = hdac->Instance->CR;
+  /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
+  tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << Channel);
+  /* Configure for the selected DAC channel: buffer output, trigger */
+  /* Set TSELx and TENx bits according to DAC_Trigger value */
+  /* Set BOFFx bit according to DAC_OutputBuffer value */   
+  tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer);
+  /* Calculate CR register value depending on DAC_Channel */
+  tmpreg1 |= tmpreg2 << Channel;
+  /* Write to DAC CR */
+  hdac->Instance->CR = tmpreg1;
+  /* Disable wave generation */
+  hdac->Instance->CR &= ~(DAC_CR_WAVE1 << Channel);
+  
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hdac);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the specified data holding register value for DAC channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel. 
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected  
+  * @param  Alignment: Specifies the data alignment.
+  *          This parameter can be one of the following values:
+  *            @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
+  *            @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
+  *            @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
+  * @param  Data: Data to be loaded in the selected data holding register.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data)
+{  
+  __IO uint32_t tmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+  assert_param(IS_DAC_ALIGN(Alignment));
+  assert_param(IS_DAC_DATA(Data));
+  
+  tmp = (uint32_t)hdac->Instance; 
+  if(Channel == DAC_CHANNEL_1)
+  {
+    tmp += DAC_DHR12R1_ALIGNMENT(Alignment);
+  }
+  else
+  {
+    tmp += DAC_DHR12R2_ALIGNMENT(Alignment);
+  }
+
+  /* Set the DAC channel1 selected data holding register */
+  *(__IO uint32_t *) tmp = Data;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions
+ *  @brief   Peripheral State and Errors functions 
+ *
+@verbatim   
+  ==============================================================================
+            ##### Peripheral State and Errors functions #####
+  ==============================================================================  
+    [..]
+    This subsection provides functions allowing to
+      (+) Check the DAC state.
+      (+) Check the DAC Errors.
+        
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  return the DAC state
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval HAL state
+  */
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac)
+{
+  /* Return DAC state */
+  return hdac->State;
+}
+
+
+/**
+  * @brief  Return the DAC error code
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval DAC Error Code
+  */
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac)
+{
+  return hdac->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  DMA conversion complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma)   
+{
+  DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  HAL_DAC_ConvCpltCallbackCh1(hdac); 
+  
+  hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+  * @brief  DMA half transfer complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma)   
+{
+    DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+    /* Conversion complete callback */
+    HAL_DAC_ConvHalfCpltCallbackCh1(hdac); 
+}
+
+/**
+  * @brief  DMA error callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma)   
+{
+  DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+    
+  /* Set DAC error code to DMA error */
+  hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
+    
+  HAL_DAC_ErrorCallbackCh1(hdac); 
+    
+  hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dac.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,408 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dac.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of DAC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DAC_H
+#define __STM32F7xx_HAL_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DAC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DAC_Exported_Types DAC Exported Types
+  * @{
+  */
+
+/** 
+  * @brief HAL State structures definition
+  */
+typedef enum
+{
+  HAL_DAC_STATE_RESET             = 0x00,  /*!< DAC not yet initialized or disabled  */
+  HAL_DAC_STATE_READY             = 0x01,  /*!< DAC initialized and ready for use    */
+  HAL_DAC_STATE_BUSY              = 0x02,  /*!< DAC internal processing is ongoing   */
+  HAL_DAC_STATE_TIMEOUT           = 0x03,  /*!< DAC timeout state                    */
+  HAL_DAC_STATE_ERROR             = 0x04   /*!< DAC error state                      */
+}HAL_DAC_StateTypeDef;
+ 
+/** 
+  * @brief DAC handle Structure definition
+  */
+typedef struct
+{
+  DAC_TypeDef                 *Instance;     /*!< Register base address             */
+
+  __IO HAL_DAC_StateTypeDef   State;         /*!< DAC communication state           */
+
+  HAL_LockTypeDef             Lock;          /*!< DAC locking object                */
+
+  DMA_HandleTypeDef           *DMA_Handle1;  /*!< Pointer DMA handler for channel 1 */
+
+  DMA_HandleTypeDef           *DMA_Handle2;  /*!< Pointer DMA handler for channel 2 */
+
+  __IO uint32_t               ErrorCode;     /*!< DAC Error code                    */
+
+}DAC_HandleTypeDef;
+
+/** 
+  * @brief DAC Configuration regular Channel structure definition
+  */
+typedef struct
+{
+  uint32_t DAC_Trigger;       /*!< Specifies the external trigger for the selected DAC channel.
+                                   This parameter can be a value of @ref DAC_trigger_selection */
+
+  uint32_t DAC_OutputBuffer;  /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+                                   This parameter can be a value of @ref DAC_output_buffer */
+}DAC_ChannelConfTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DAC_Exported_Constants DAC Exported Constants
+  * @{
+  */
+
+/** @defgroup DAC_Error_Code DAC Error Code
+  * @{
+  */
+#define  HAL_DAC_ERROR_NONE              0x00    /*!< No error                          */
+#define  HAL_DAC_ERROR_DMAUNDERRUNCH1    0x01    /*!< DAC channel1 DAM underrun error   */
+#define  HAL_DAC_ERROR_DMAUNDERRUNCH2    0x02    /*!< DAC channel2 DAM underrun error   */
+#define  HAL_DAC_ERROR_DMA               0x04    /*!< DMA error                         */
+/**
+  * @}
+  */
+
+/** @defgroup DAC_trigger_selection DAC Trigger Selection
+  * @{
+  */
+
+#define DAC_TRIGGER_NONE                   ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register 
+                                                                       has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO                ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO                ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T5_TRGO                ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO                ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO                ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T8_TRGO                ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */                                                                       
+
+#define DAC_TRIGGER_EXT_IT9                ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE               ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+/**
+  * @}
+  */
+
+/** @defgroup DAC_output_buffer  DAC Output Buffer
+  * @{
+  */
+#define DAC_OUTPUTBUFFER_ENABLE            ((uint32_t)0x00000000)
+#define DAC_OUTPUTBUFFER_DISABLE           ((uint32_t)DAC_CR_BOFF1)
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Channel_selection DAC Channel Selection
+  * @{
+  */
+#define DAC_CHANNEL_1                      ((uint32_t)0x00000000)
+#define DAC_CHANNEL_2                      ((uint32_t)0x00000010)
+/**
+  * @}
+  */
+
+/** @defgroup DAC_data_alignment DAC Data Alignment
+  * @{
+  */
+#define DAC_ALIGN_12B_R                    ((uint32_t)0x00000000)
+#define DAC_ALIGN_12B_L                    ((uint32_t)0x00000004)
+#define DAC_ALIGN_8B_R                     ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup DAC_flags_definition DAC Flags Definition
+  * @{
+  */ 
+#define DAC_FLAG_DMAUDR1                   ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_FLAG_DMAUDR2                   ((uint32_t)DAC_SR_DMAUDR2)
+/**
+  * @}
+  */
+
+/** @defgroup DAC_IT_definition DAC IT Definition
+  * @{
+  */ 
+#define DAC_IT_DMAUDR1                   ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_IT_DMAUDR2                   ((uint32_t)DAC_SR_DMAUDR2)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DAC_Exported_Macros DAC Exported Macros
+  * @{
+  */
+
+/** @brief Reset DAC handle state
+  * @param  __HANDLE__: specifies the DAC handle.
+  * @retval None
+  */
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+
+/** @brief Enable the DAC channel
+  * @param  __HANDLE__: specifies the DAC handle.
+  * @param  __DAC_CHANNEL__: specifies the DAC channel
+  * @retval None
+  */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_CHANNEL__) \
+((__HANDLE__)->Instance->CR |=  (DAC_CR_EN1 << (__DAC_CHANNEL__)))
+
+/** @brief Disable the DAC channel
+  * @param  __HANDLE__: specifies the DAC handle
+  * @param  __DAC_CHANNEL__: specifies the DAC channel.
+  * @retval None
+  */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_CHANNEL__) \
+((__HANDLE__)->Instance->CR &=  ~(DAC_CR_EN1 << (__DAC_CHANNEL__)))
+
+
+/** @brief Enable the DAC interrupt
+  * @param  __HANDLE__: specifies the DAC handle
+  * @param  __INTERRUPT__: specifies the DAC interrupt.
+  * @retval None
+  */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/** @brief Disable the DAC interrupt
+  * @param  __HANDLE__: specifies the DAC handle
+  * @param  __INTERRUPT__: specifies the DAC interrupt.
+  * @retval None
+  */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/** @brief  Checks if the specified DAC interrupt source is enabled or disabled.
+  * @param __HANDLE__: DAC handle
+  * @param __INTERRUPT__: DAC interrupt source to check
+  *          This parameter can be any combination of the following values:
+  *            @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
+  *            @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
+  * @retval State of interruption (SET or RESET)
+  */
+#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief  Get the selected DAC's flag status.
+  * @param  __HANDLE__: specifies the DAC handle.
+  * @param  __FLAG__: specifies the flag to clear.
+  *         This parameter can be any combination of the following values:
+  *            @arg DAC_FLAG_DMAUDR1: DMA underrun 1 flag
+  *            @arg DAC_FLAG_DMAUDR2: DMA underrun 2 flag
+  * @retval None
+  */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the DAC's flag.
+  * @param  __HANDLE__: specifies the DAC handle.
+  * @param  __FLAG__: specifies the flag to clear.
+  *         This parameter can be any combination of the following values:
+  *            @arg DAC_FLAG_DMAUDR1: DMA underrun 1 flag
+  *            @arg DAC_FLAG_DMAUDR2: DMA underrun 2 flag
+  * @retval None
+  */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+/**
+  * @}
+  */
+
+/* Include DAC HAL Extension module */
+#include "stm32f7xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DAC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions *********************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
+/**
+  * @}
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel);
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
+/**
+  * @}
+  */
+
+/** @addtogroup DAC_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral State functions *************************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DAC_Private_Constants DAC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DAC_Private_Macros DAC Private Macros
+  * @{
+  */
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+                             ((ALIGN) == DAC_ALIGN_12B_L) || \
+                             ((ALIGN) == DAC_ALIGN_8B_R))
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+                                 ((CHANNEL) == DAC_CHANNEL_2))
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+                                           ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+                                 ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+                                 ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+/** @brief Set DHR12R1 alignment
+  * @param  __ALIGNMENT__: specifies the DAC alignment
+  * @retval None
+  */
+#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000008) + (__ALIGNMENT__))
+
+/** @brief  Set DHR12R2 alignment
+  * @param  __ALIGNMENT__: specifies the DAC alignment
+  * @retval None
+  */
+#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000014) + (__ALIGNMENT__))
+
+/** @brief  Set DHR12RD alignment
+  * @param  __ALIGNMENT__: specifies the DAC alignment
+  * @retval None
+  */
+#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000020) + (__ALIGNMENT__))
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DAC_Private_Functions DAC Private Functions
+  * @{
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F7xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dac_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,388 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dac_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Extended DAC HAL module driver.
+  *         This file provides firmware functions to manage the following 
+  *         functionalities of DAC extension peripheral:
+  *           + Extended features functions
+  *     
+  *
+  @verbatim      
+  ==============================================================================
+                      ##### How to use this driver #####
+  ==============================================================================
+    [..]          
+      (+) When Dual mode is enabled (i.e DAC Channel1 and Channel2 are used simultaneously) :
+          Use HAL_DACEx_DualGetValue() to get digital data to be converted and use
+          HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in Channel 1 and Channel 2.  
+      (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal.
+      (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal.
+   
+ @endverbatim    
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DACEx DACEx
+  * @brief DAC driver modules
+  * @{
+  */ 
+
+#ifdef HAL_DAC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DACEx_Exported_Functions DAC Exported Functions
+  * @{
+  */
+
+/** @defgroup DACEx_Exported_Functions_Group1 Extended features functions
+ *  @brief    Extended features functions 
+ *
+@verbatim   
+  ==============================================================================
+                 ##### Extended features functions #####
+  ==============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Start conversion.
+      (+) Stop conversion.
+      (+) Start conversion and enable DMA transfer.
+      (+) Stop conversion and disable DMA transfer.
+      (+) Get result of conversion.
+      (+) Get result of dual mode conversion.
+                     
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the last data output value of the selected DAC channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval The selected DAC channel data output value.
+  */
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac)
+{
+  uint32_t tmp = 0;
+  
+  tmp |= hdac->Instance->DOR1;
+  
+  tmp |= hdac->Instance->DOR2 << 16;
+  
+  /* Returns the DAC channel data output register value */
+  return tmp;
+}
+
+/**
+  * @brief  Enables or disables the selected DAC channel wave generation.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @param  Channel: The selected DAC channel. 
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected 
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @param  Amplitude: Select max triangle amplitude. 
+  *          This parameter can be one of the following values:
+  *            @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1
+  *            @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3
+  *            @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7
+  *            @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15
+  *            @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31
+  *            @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63
+  *            @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127
+  *            @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255
+  *            @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511
+  *            @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023
+  *            @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047
+  *            @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095                               
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
+{  
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+  assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
+  
+  /* Process locked */
+  __HAL_LOCK(hdac);
+  
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_BUSY;
+  
+  /* Enable the selected wave generation for the selected DAC channel */
+  MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_1 | Amplitude) << Channel);
+
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hdac);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables or disables the selected DAC channel wave generation.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC. 
+  * @param  Channel: The selected DAC channel. 
+  *          This parameter can be one of the following values:
+  *            @arg DAC_CHANNEL_1: DAC Channel1 selected 
+  *            @arg DAC_CHANNEL_2: DAC Channel2 selected
+  * @param  Amplitude: Unmask DAC channel LFSR for noise wave generation. 
+  *          This parameter can be one of the following values: 
+  *            @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation  
+  *            @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation
+  *            @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation 
+  *            @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation 
+  *            @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation 
+  *            @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation 
+  *            @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation 
+  *            @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation 
+  *            @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation 
+  *            @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation 
+  *            @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
+{  
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(Channel));
+  assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
+  
+  /* Process locked */
+  __HAL_LOCK(hdac);
+  
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_BUSY;
+  
+  /* Enable the selected wave generation for the selected DAC channel */
+  MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_0 | Amplitude) << Channel);
+  
+  /* Change DAC state */
+  hdac->State = HAL_DAC_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hdac);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the specified data holding register value for dual DAC channel.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *               the configuration information for the specified DAC.
+  * @param  Alignment: Specifies the data alignment for dual channel DAC.
+  *          This parameter can be one of the following values:
+  *            DAC_ALIGN_8B_R: 8bit right data alignment selected
+  *            DAC_ALIGN_12B_L: 12bit left data alignment selected
+  *            DAC_ALIGN_12B_R: 12bit right data alignment selected
+  * @param  Data1: Data for DAC Channel2 to be loaded in the selected data holding register.
+  * @param  Data2: Data for DAC Channel1 to be loaded in the selected data  holding register.
+  * @note   In dual mode, a unique register access is required to write in both
+  *          DAC channels at the same time.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2)
+{  
+  uint32_t data = 0, tmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_DAC_ALIGN(Alignment));
+  assert_param(IS_DAC_DATA(Data1));
+  assert_param(IS_DAC_DATA(Data2));
+  
+  /* Calculate and set dual DAC data holding register value */
+  if (Alignment == DAC_ALIGN_8B_R)
+  {
+    data = ((uint32_t)Data2 << 8) | Data1; 
+  }
+  else
+  {
+    data = ((uint32_t)Data2 << 16) | Data1;
+  }
+  
+  tmp = (uint32_t)hdac->Instance;
+  tmp += DAC_DHR12RD_ALIGNMENT(Alignment);
+
+  /* Set the dual DAC selected data holding register */
+  *(__IO uint32_t *)tmp = data;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  Conversion complete callback in non blocking mode for Channel2 
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdac);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DAC_ConvCpltCallbackCh2 could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Conversion half DMA transfer callback in non blocking mode for Channel2 
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdac);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DACEx_ConvHalfCpltCallbackCh2 could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Error DAC callback for Channel2.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdac);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DACEx_ErrorCallbackCh2 could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DMA underrun DAC callback for channel2.
+  * @param  hdac: pointer to a DAC_HandleTypeDef structure that contains
+  *         the configuration information for the specified DAC.
+  * @retval None
+  */
+__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdac);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DACEx_DMAUnderrunCallbackCh2 could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DMA conversion complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma)   
+{
+  DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  HAL_DACEx_ConvCpltCallbackCh2(hdac); 
+  
+  hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+  * @brief  DMA half transfer complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma)   
+{
+    DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+    /* Conversion complete callback */
+    HAL_DACEx_ConvHalfCpltCallbackCh2(hdac); 
+}
+
+/**
+  * @brief  DMA error callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma)   
+{
+  DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+    
+  /* Set DAC error code to DMA error */
+  hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
+    
+  HAL_DACEx_ErrorCallbackCh2(hdac); 
+    
+  hdac->State= HAL_DAC_STATE_READY;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dac_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,191 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dac.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of DAC HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DAC_EX_H
+#define __STM32F7xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DACEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DACEx_Exported_Constants DAC Exported Constants
+  * @{
+  */
+   
+/** @defgroup DACEx_lfsrunmask_triangleamplitude DAC LFS Run Mask Triangle Amplitude
+  * @{
+  */
+#define DAC_LFSRUNMASK_BIT0                ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0             ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0             ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0             ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0             ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0             ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0             ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0             ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0             ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0             ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0            ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0            ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1            ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3            ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7            ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15           ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31           ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63           ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127          ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255          ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511          ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023         ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047         ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095         ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DACEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DACEx_Exported_Functions_Group1
+  * @{
+  */
+/* Extension features functions ***********************************************/
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DACEx_Private_Constants DAC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DACEx_Private_Macros DAC Private Macros
+  * @{
+  */
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+                                                      ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+                                                      ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DACEx_Private_Functions DAC Private Functions
+  * @{
+  */
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma); 
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F7xx_HAL_DAC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dcmi.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,842 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dcmi.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   DCMI HAL module driver
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Digital Camera Interface (DCMI) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State and Error functions  
+  *           
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+      The sequence below describes how to use this driver to capture image
+      from a camera module connected to the DCMI Interface.
+      This sequence does not take into account the configuration of the
+      camera module, which should be made before to configure and enable
+      the DCMI to capture images.
+
+    (#) Program the required configuration through following parameters:
+        horizontal and vertical polarity, pixel clock polarity, Capture Rate,
+        Synchronization Mode, code of the frame delimiter and data width 
+        using HAL_DCMI_Init() function.
+
+    (#) Configure the DMA2_Stream1 channel1 to transfer Data from DCMI DR
+        register to the destination memory buffer.
+
+    (#) Program the required configuration through following parameters:
+        DCMI mode, destination memory Buffer address and the data length 
+        and enable capture using HAL_DCMI_Start_DMA() function.
+
+    (#) Optionally, configure and Enable the CROP feature to select a rectangular
+        window from the received image using HAL_DCMI_ConfigCrop() 
+        and HAL_DCMI_EnableCROP() functions
+
+    (#) The capture can be stopped using HAL_DCMI_Stop() function.
+
+    (#) To control DCMI state you can use the function HAL_DCMI_GetState().
+
+     *** DCMI HAL driver macros list ***
+     ============================================= 
+     [..]
+       Below the list of most used macros in DCMI HAL driver.
+       
+      (+) __HAL_DCMI_ENABLE: Enable the DCMI peripheral.
+      (+) __HAL_DCMI_DISABLE: Disable the DCMI peripheral.
+      (+) __HAL_DCMI_GET_FLAG: Get the DCMI pending flags.
+      (+) __HAL_DCMI_CLEAR_FLAG: Clear the DCMI pending flags.
+      (+) __HAL_DCMI_ENABLE_IT: Enable the specified DCMI interrupts.
+      (+) __HAL_DCMI_DISABLE_IT: Disable the specified DCMI interrupts.
+      (+) __HAL_DCMI_GET_IT_SOURCE: Check whether the specified DCMI interrupt has occurred or not.
+ 
+     [..] 
+       (@) You can refer to the DCMI HAL driver header file for more useful macros
+      
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+/** @defgroup DCMI DCMI
+  * @brief DCMI HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define HAL_TIMEOUT_DCMI_STOP    ((uint32_t)1000)  /* 1s  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void       DCMI_DMAConvCplt(DMA_HandleTypeDef *hdma);
+static void       DCMI_DMAError(DMA_HandleTypeDef *hdma);
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DCMI_Exported_Functions DCMI Exported Functions
+  * @{
+  */
+
+/** @defgroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions
+ *  @brief   Initialization and Configuration functions
+ *
+@verbatim   
+ ===============================================================================
+                ##### Initialization and Configuration functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the DCMI
+      (+) De-initialize the DCMI 
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Initializes the DCMI according to the specified
+  *         parameters in the DCMI_InitTypeDef and create the associated handle.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi)
+{     
+  /* Check the DCMI peripheral state */
+  if(hdcmi == NULL)
+  {
+     return HAL_ERROR;
+  }
+  
+  /* Check function parameters */
+  assert_param(IS_DCMI_ALL_INSTANCE(hdcmi->Instance));
+  assert_param(IS_DCMI_SYNCHRO(hdcmi->Init.SynchroMode));  
+  assert_param(IS_DCMI_PCKPOLARITY(hdcmi->Init.PCKPolarity));
+  assert_param(IS_DCMI_VSPOLARITY(hdcmi->Init.VSPolarity));
+  assert_param(IS_DCMI_HSPOLARITY(hdcmi->Init.HSPolarity));
+  assert_param(IS_DCMI_CAPTURE_RATE(hdcmi->Init.CaptureRate));
+  assert_param(IS_DCMI_EXTENDED_DATA(hdcmi->Init.ExtendedDataMode));
+  assert_param(IS_DCMI_MODE_JPEG(hdcmi->Init.JPEGMode));
+
+  if(hdcmi->State == HAL_DCMI_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hdcmi->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_DCMI_MspInit(hdcmi);
+  } 
+  
+  /* Change the DCMI state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY; 
+
+  /* Set DCMI parameters */
+  /* Configures the HS, VS, DE and PC polarity */
+  hdcmi->Instance->CR &= ~(DCMI_CR_PCKPOL | DCMI_CR_HSPOL  | DCMI_CR_VSPOL  | DCMI_CR_EDM_0 |
+                           DCMI_CR_EDM_1  | DCMI_CR_FCRC_0 | DCMI_CR_FCRC_1 | DCMI_CR_JPEG  |
+                           DCMI_CR_ESS);
+  hdcmi->Instance->CR |=  (uint32_t)(hdcmi->Init.SynchroMode | hdcmi->Init.CaptureRate | \
+                                     hdcmi->Init.VSPolarity  | hdcmi->Init.HSPolarity  | \
+                                     hdcmi->Init.PCKPolarity | hdcmi->Init.ExtendedDataMode | \
+                                     hdcmi->Init.JPEGMode);
+
+  if(hdcmi->Init.SynchroMode == DCMI_SYNCHRO_EMBEDDED)
+  {
+    DCMI->ESCR = (((uint32_t)hdcmi->Init.SyncroCode.FrameStartCode)    |
+                  ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode << 8)|
+                  ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode << 16) |
+                  ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode << 24));
+  }
+
+  /* Enable the Line interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE);
+
+  /* Enable the VSYNC interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_VSYNC);
+
+  /* Enable the Frame capture complete interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_FRAME);
+
+  /* Enable the Synchronization error interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_ERR);
+
+  /* Enable the Overflow interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_OVF);
+
+  /* Enable DCMI by setting DCMIEN bit */
+  __HAL_DCMI_ENABLE(hdcmi);
+
+  /* Update error code */
+  hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
+  
+  /* Initialize the DCMI state*/
+  hdcmi->State  = HAL_DCMI_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deinitializes the DCMI peripheral registers to their default reset
+  *         values.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi)
+{
+  /* DeInit the low level hardware */
+  HAL_DCMI_MspDeInit(hdcmi);
+
+  /* Update error code */
+  hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
+
+  /* Initialize the DCMI state*/
+  hdcmi->State = HAL_DCMI_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hdcmi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DCMI MSP.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval None
+  */
+__weak void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdcmi);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DCMI_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  DeInitializes the DCMI MSP.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval None
+  */
+__weak void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdcmi);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DCMI_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+/** @defgroup DCMI_Exported_Functions_Group2 IO operation functions 
+ *  @brief   IO operation functions  
+ *
+@verbatim   
+ ===============================================================================
+                      #####  IO operation functions  #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Configure destination address and data length and 
+          Enables DCMI DMA request and enables DCMI capture
+      (+) Stop the DCMI capture.
+      (+) Handles DCMI interrupt request.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables DCMI DMA request and enables DCMI capture  
+  * @param  hdcmi:     pointer to a DCMI_HandleTypeDef structure that contains
+  *                    the configuration information for DCMI.
+  * @param  DCMI_Mode: DCMI capture mode snapshot or continuous grab.
+  * @param  pData:     The destination memory Buffer address (LCD Frame buffer).
+  * @param  Length:    The length of capture to be transferred.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length)
+{  
+  /* Initialize the second memory address */
+  uint32_t SecondMemAddress = 0;
+
+  /* Check function parameters */
+  assert_param(IS_DCMI_CAPTURE_MODE(DCMI_Mode));
+
+  /* Process Locked */
+  __HAL_LOCK(hdcmi);
+
+  /* Lock the DCMI peripheral state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DCMI_CAPTURE_MODE(DCMI_Mode));
+
+  /* Configure the DCMI Mode */
+  hdcmi->Instance->CR &= ~(DCMI_CR_CM);
+  hdcmi->Instance->CR |=  (uint32_t)(DCMI_Mode);
+
+  /* Set the DMA memory0 conversion complete callback */
+  hdcmi->DMA_Handle->XferCpltCallback = DCMI_DMAConvCplt;
+
+  /* Set the DMA error callback */
+  hdcmi->DMA_Handle->XferErrorCallback = DCMI_DMAError;
+
+  if(Length <= 0xFFFF)
+  {
+    /* Enable the DMA Stream */
+    HAL_DMA_Start_IT(hdcmi->DMA_Handle, (uint32_t)&hdcmi->Instance->DR, (uint32_t)pData, Length);
+  }
+  else /* DCMI_DOUBLE_BUFFER Mode */
+  {
+    /* Set the DMA memory1 conversion complete callback */
+    hdcmi->DMA_Handle->XferM1CpltCallback = DCMI_DMAConvCplt; 
+
+    /* Initialize transfer parameters */
+    hdcmi->XferCount = 1;
+    hdcmi->XferSize = Length;
+    hdcmi->pBuffPtr = pData;
+      
+    /* Get the number of buffer */
+    while(hdcmi->XferSize > 0xFFFF)
+    {
+      hdcmi->XferSize = (hdcmi->XferSize/2);
+      hdcmi->XferCount = hdcmi->XferCount*2;
+    }
+
+    /* Update DCMI counter  and transfer number*/
+    hdcmi->XferCount = (hdcmi->XferCount - 2);
+    hdcmi->XferTransferNumber = hdcmi->XferCount;
+
+    /* Update second memory address */
+    SecondMemAddress = (uint32_t)(pData + (4*hdcmi->XferSize));
+
+    /* Start DMA multi buffer transfer */
+    HAL_DMAEx_MultiBufferStart_IT(hdcmi->DMA_Handle, (uint32_t)&hdcmi->Instance->DR, (uint32_t)pData, SecondMemAddress, hdcmi->XferSize);
+  }
+
+  /* Enable Capture */
+  DCMI->CR |= DCMI_CR_CAPTURE;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable DCMI DMA request and Disable DCMI capture  
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI. 
+  * @retval HAL status     
+  */
+HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi)
+{
+  uint32_t tickstart = 0;
+
+  /* Lock the DCMI peripheral state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+  __HAL_DCMI_DISABLE(hdcmi);
+
+  /* Disable Capture */
+  DCMI->CR &= ~(DCMI_CR_CAPTURE);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check if the DCMI capture effectively disabled */
+  while((hdcmi->Instance->CR & DCMI_CR_CAPTURE) != 0)
+  {
+    if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DCMI_STOP)
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdcmi);
+      
+      /* Update error code */
+      hdcmi->ErrorCode |= HAL_DCMI_ERROR_TIMEOUT;
+      
+      /* Change DCMI state */
+      hdcmi->State = HAL_DCMI_STATE_TIMEOUT;
+      
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Disable the DMA */
+  HAL_DMA_Abort(hdcmi->DMA_Handle);
+
+  /* Update error code */
+  hdcmi->ErrorCode |= HAL_DCMI_ERROR_NONE;
+
+  /* Change DCMI state */
+  hdcmi->State = HAL_DCMI_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdcmi);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles DCMI interrupt request.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for the DCMI.
+  * @retval None
+  */
+void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi)
+{  
+  /* Synchronization error interrupt management *******************************/
+  if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_ERRRI) != RESET)
+  {
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_ERR) != RESET)
+    {
+      /* Disable the Synchronization error interrupt */
+      __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_ERR); 
+
+      /* Clear the Synchronization error flag */
+      __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_ERRRI);
+
+      /* Update error code */
+      hdcmi->ErrorCode |= HAL_DCMI_ERROR_SYNC;
+
+      /* Change DCMI state */
+      hdcmi->State = HAL_DCMI_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdcmi);
+
+      /* Abort the DMA Transfer */
+      HAL_DMA_Abort(hdcmi->DMA_Handle);
+      
+      /* Synchronization error Callback */
+      HAL_DCMI_ErrorCallback(hdcmi);
+    }
+  }
+  /* Overflow interrupt management ********************************************/
+  if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_OVFRI) != RESET) 
+  {
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_OVF) != RESET)
+    {
+      /* Disable the Overflow interrupt */
+      __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_OVF);
+
+      /* Clear the Overflow flag */
+      __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_OVFRI);
+
+      /* Update error code */
+      hdcmi->ErrorCode |= HAL_DCMI_ERROR_OVF;
+
+      /* Change DCMI state */
+      hdcmi->State = HAL_DCMI_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdcmi);
+
+      /* Abort the DMA Transfer */
+      HAL_DMA_Abort(hdcmi->DMA_Handle);
+
+      /* Overflow Callback */
+      HAL_DCMI_ErrorCallback(hdcmi);
+    }
+  }
+  /* Line Interrupt management ************************************************/
+  if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_LINERI) != RESET)
+  {
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_LINE) != RESET)
+    {
+      /* Clear the Line interrupt flag */  
+      __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_LINERI);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdcmi);
+
+      /* Line interrupt Callback */
+      HAL_DCMI_LineEventCallback(hdcmi);
+    }
+  }
+  /* VSYNC interrupt management ***********************************************/
+  if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_VSYNCRI) != RESET)
+  {
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_VSYNC) != RESET)
+    {
+      /* Disable the VSYNC interrupt */
+      __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_VSYNC);   
+
+      /* Clear the VSYNC flag */
+      __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_VSYNCRI);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdcmi);
+
+      /* VSYNC Callback */
+      HAL_DCMI_VsyncEventCallback(hdcmi);
+    }
+  }
+  /* End of Frame interrupt management ****************************************/
+  if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_FRAMERI) != RESET)
+  {
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_FRAME) != RESET)
+    {
+      /* Disable the End of Frame interrupt */
+      __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_FRAME);
+
+      /* Clear the End of Frame flag */
+      __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_FRAMERI);
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdcmi);
+
+      /* End of Frame Callback */
+      HAL_DCMI_FrameEventCallback(hdcmi);
+    }
+  }
+}
+
+/**
+  * @brief  Error DCMI callback.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval None
+  */
+__weak void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdcmi);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DCMI_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Line Event callback.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval None
+  */
+__weak void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DCMI_LineEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  VSYNC Event callback.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval None
+  */
+__weak void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdcmi);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DCMI_VsyncEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Frame Event callback.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval None
+  */
+__weak void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdcmi);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DCMI_FrameEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief    Peripheral Control functions 
+ *
+@verbatim   
+ ===============================================================================
+                    ##### Peripheral Control functions #####
+ ===============================================================================  
+[..]  This section provides functions allowing to:
+      (+) Configure the CROP feature.
+      (+) Enable/Disable the CROP feature.
+			(+) Enable/Disable the JPEG feature.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configure the DCMI CROP coordinate.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @param  YSize: DCMI Line number
+  * @param  XSize: DCMI Pixel per line
+  * @param  X0:    DCMI window X offset
+  * @param  Y0:    DCMI window Y offset
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize)
+{
+  /* Process Locked */
+  __HAL_LOCK(hdcmi);
+
+  /* Lock the DCMI peripheral state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DCMI_WINDOW_COORDINATE(X0));
+  assert_param(IS_DCMI_WINDOW_HEIGHT(Y0));
+  assert_param(IS_DCMI_WINDOW_COORDINATE(XSize));
+  assert_param(IS_DCMI_WINDOW_COORDINATE(YSize));
+	
+  /* Configure CROP */
+  DCMI->CWSIZER = (XSize | (YSize << 16));
+  DCMI->CWSTRTR = (X0 | (Y0 << 16));
+
+  /* Initialize the DCMI state*/
+  hdcmi->State  = HAL_DCMI_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdcmi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the Crop feature.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi)
+{
+  /* Process Locked */
+  __HAL_LOCK(hdcmi);
+
+  /* Lock the DCMI peripheral state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+  /* Disable DCMI Crop feature */
+  DCMI->CR &= ~(uint32_t)DCMI_CR_CROP;  
+
+  /* Change the DCMI state*/
+  hdcmi->State = HAL_DCMI_STATE_READY;   
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdcmi);
+
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Enable the Crop feature.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi)
+{
+  /* Process Locked */
+  __HAL_LOCK(hdcmi);
+
+  /* Lock the DCMI peripheral state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY;
+
+  /* Enable DCMI Crop feature */
+  DCMI->CR |= (uint32_t)DCMI_CR_CROP;
+
+  /* Change the DCMI state*/
+  hdcmi->State = HAL_DCMI_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdcmi);
+
+  return HAL_OK;  
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Exported_Functions_Group4 Peripheral State functions
+ *  @brief    Peripheral State functions 
+ *
+@verbatim   
+ ===============================================================================
+               ##### Peripheral State and Errors functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides functions allowing to
+      (+) Check the DCMI state.
+      (+) Get the specific DCMI error flag.  
+
+@endverbatim
+  * @{
+  */ 
+
+/**
+  * @brief  Return the DCMI state
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL state
+  */
+HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi)  
+{
+  return hdcmi->State;
+}
+
+/**
+* @brief  Return the DCMI error code
+* @param  hdcmi : pointer to a DCMI_HandleTypeDef structure that contains
+  *               the configuration information for DCMI.
+* @retval DCMI Error Code
+*/
+uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi)
+{
+  return hdcmi->ErrorCode;
+}
+
+/**
+  * @}
+  */
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DCMI_Private_Functions DCMI Private Functions
+  * @{
+  */
+  /**
+  * @brief  DMA conversion complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void DCMI_DMAConvCplt(DMA_HandleTypeDef *hdma)
+{
+  uint32_t tmp = 0;
+ 
+  DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hdcmi->State= HAL_DCMI_STATE_READY;
+
+  if(hdcmi->XferCount != 0)
+  {
+    /* Update memory 0 address location */
+    tmp = ((hdcmi->DMA_Handle->Instance->CR) & DMA_SxCR_CT);
+    if(((hdcmi->XferCount % 2) == 0) && (tmp != 0))
+    {
+      tmp = hdcmi->DMA_Handle->Instance->M0AR;
+      HAL_DMAEx_ChangeMemory(hdcmi->DMA_Handle, (tmp + (8*hdcmi->XferSize)), MEMORY0);
+      hdcmi->XferCount--;
+    }
+    /* Update memory 1 address location */
+    else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) == 0)
+    {
+      tmp = hdcmi->DMA_Handle->Instance->M1AR;
+      HAL_DMAEx_ChangeMemory(hdcmi->DMA_Handle, (tmp + (8*hdcmi->XferSize)), MEMORY1);
+      hdcmi->XferCount--;
+    }
+  }
+  /* Update memory 0 address location */
+  else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) != 0)
+  {
+    hdcmi->DMA_Handle->Instance->M0AR = hdcmi->pBuffPtr;
+  }
+  /* Update memory 1 address location */
+  else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) == 0)
+  {
+    tmp = hdcmi->pBuffPtr;
+    hdcmi->DMA_Handle->Instance->M1AR = (tmp + (4*hdcmi->XferSize));
+    hdcmi->XferCount = hdcmi->XferTransferNumber;
+  }
+
+  if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_FRAMERI) != RESET)
+  {
+    /* Process Unlocked */
+    __HAL_UNLOCK(hdcmi);
+
+    /* FRAME Callback */
+    HAL_DCMI_FrameEventCallback(hdcmi);
+  }
+}
+
+/**
+  * @brief  DMA error callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void DCMI_DMAError(DMA_HandleTypeDef *hdma)
+{
+    DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;     
+    hdcmi->State= HAL_DCMI_STATE_READY;
+    HAL_DCMI_ErrorCallback(hdcmi);
+}
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+#endif /* HAL_DCMI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dcmi.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,497 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dcmi.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of DCMI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DCMI_H
+#define __STM32F7xx_HAL_DCMI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/* Include DCMI HAL Extended module */
+/* (include on top of file since DCMI structures are defined in extended file) */
+#include "stm32f7xx_hal_dcmi_ex.h"
+	 
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DCMI DCMI
+  * @brief DCMI HAL module driver
+  * @{
+  */  
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Types DCMI Exported Types
+  * @{
+  */
+/** 
+  * @brief  HAL DCMI State structures definition
+  */ 
+typedef enum
+{
+  HAL_DCMI_STATE_RESET             = 0x00,  /*!< DCMI not yet initialized or disabled  */
+  HAL_DCMI_STATE_READY             = 0x01,  /*!< DCMI initialized and ready for use    */
+  HAL_DCMI_STATE_BUSY              = 0x02,  /*!< DCMI internal processing is ongoing   */
+  HAL_DCMI_STATE_TIMEOUT           = 0x03,  /*!< DCMI timeout state                    */
+  HAL_DCMI_STATE_ERROR             = 0x04   /*!< DCMI error state                      */
+}HAL_DCMI_StateTypeDef;
+
+/** 
+  * @brief  DCMI handle Structure definition
+  */
+typedef struct
+{
+  DCMI_TypeDef                  *Instance;           /*!< DCMI Register base address   */
+
+  DCMI_InitTypeDef              Init;                /*!< DCMI parameters              */
+
+  HAL_LockTypeDef               Lock;                /*!< DCMI locking object          */
+
+  __IO HAL_DCMI_StateTypeDef    State;               /*!< DCMI state                   */
+
+  __IO uint32_t                 XferCount;           /*!< DMA transfer counter         */
+
+  __IO uint32_t                 XferSize;            /*!< DMA transfer size            */
+
+  uint32_t                      XferTransferNumber;  /*!< DMA transfer number          */
+
+  uint32_t                      pBuffPtr;            /*!< Pointer to DMA output buffer */
+
+  DMA_HandleTypeDef             *DMA_Handle;         /*!< Pointer to the DMA handler   */
+
+  __IO uint32_t                 ErrorCode;           /*!< DCMI Error code              */
+
+}DCMI_HandleTypeDef;
+/**
+  * @}
+  */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DCMI_Exported_Constants DCMI Exported Constants
+  * @{
+  */
+
+/** @defgroup DCMI_Error_Code DCMI Error Code
+  * @{
+  */
+#define HAL_DCMI_ERROR_NONE      ((uint32_t)0x00000000)    /*!< No error              */
+#define HAL_DCMI_ERROR_OVF       ((uint32_t)0x00000001)    /*!< Overflow error        */
+#define HAL_DCMI_ERROR_SYNC      ((uint32_t)0x00000002)    /*!< Synchronization error */
+#define HAL_DCMI_ERROR_TIMEOUT   ((uint32_t)0x00000020)    /*!< Timeout error         */
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Capture_Mode DCMI Capture Mode
+  * @{
+  */ 
+#define DCMI_MODE_CONTINUOUS           ((uint32_t)0x00000000)  /*!< The received data are transferred continuously 
+                                                                    into the destination memory through the DMA             */
+#define DCMI_MODE_SNAPSHOT             ((uint32_t)DCMI_CR_CM)  /*!< Once activated, the interface waits for the start of 
+                                                                    frame and then transfers a single frame through the DMA */
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Synchronization_Mode DCMI Synchronization Mode
+  * @{
+  */ 
+#define DCMI_SYNCHRO_HARDWARE        ((uint32_t)0x00000000)   /*!< Hardware synchronization data capture (frame/line start/stop)
+                                                                   is synchronized with the HSYNC/VSYNC signals                  */
+#define DCMI_SYNCHRO_EMBEDDED        ((uint32_t)DCMI_CR_ESS)  /*!< Embedded synchronization data capture is synchronized with 
+                                                                   synchronization codes embedded in the data flow               */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_PIXCK_Polarity DCMI PIXCK Polarity
+  * @{
+  */
+#define DCMI_PCKPOLARITY_FALLING    ((uint32_t)0x00000000)      /*!< Pixel clock active on Falling edge */
+#define DCMI_PCKPOLARITY_RISING     ((uint32_t)DCMI_CR_PCKPOL)  /*!< Pixel clock active on Rising edge  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_VSYNC_Polarity DCMI VSYNC Polarity
+  * @{
+  */
+#define DCMI_VSPOLARITY_LOW     ((uint32_t)0x00000000)     /*!< Vertical synchronization active Low  */
+#define DCMI_VSPOLARITY_HIGH    ((uint32_t)DCMI_CR_VSPOL)  /*!< Vertical synchronization active High */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_HSYNC_Polarity DCMI HSYNC Polarity
+  * @{
+  */ 
+#define DCMI_HSPOLARITY_LOW     ((uint32_t)0x00000000)     /*!< Horizontal synchronization active Low  */
+#define DCMI_HSPOLARITY_HIGH    ((uint32_t)DCMI_CR_HSPOL)  /*!< Horizontal synchronization active High */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_MODE_JPEG DCMI MODE JPEG
+  * @{
+  */
+#define DCMI_JPEG_DISABLE   ((uint32_t)0x00000000)    /*!< Mode JPEG Disabled  */
+#define DCMI_JPEG_ENABLE    ((uint32_t)DCMI_CR_JPEG)  /*!< Mode JPEG Enabled   */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Capture_Rate DCMI Capture Rate
+  * @{
+  */
+#define DCMI_CR_ALL_FRAME            ((uint32_t)0x00000000)      /*!< All frames are captured        */
+#define DCMI_CR_ALTERNATE_2_FRAME    ((uint32_t)DCMI_CR_FCRC_0)  /*!< Every alternate frame captured */
+#define DCMI_CR_ALTERNATE_4_FRAME    ((uint32_t)DCMI_CR_FCRC_1)  /*!< One frame in 4 frames captured */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Extended_Data_Mode DCMI Extended Data Mode
+  * @{
+  */
+#define DCMI_EXTEND_DATA_8B     ((uint32_t)0x00000000)                       /*!< Interface captures 8-bit data on every pixel clock  */
+#define DCMI_EXTEND_DATA_10B    ((uint32_t)DCMI_CR_EDM_0)                    /*!< Interface captures 10-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_12B    ((uint32_t)DCMI_CR_EDM_1)                    /*!< Interface captures 12-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_14B    ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1))  /*!< Interface captures 14-bit data on every pixel clock */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Window_Coordinate DCMI Window Coordinate 
+  * @{
+  */
+#define DCMI_WINDOW_COORDINATE    ((uint32_t)0x3FFF)  /*!< Window coordinate */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Window_Height DCMI Window Height
+  * @{
+  */ 
+#define DCMI_WINDOW_HEIGHT    ((uint32_t)0x1FFF)  /*!< Window Height */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_interrupt_sources  DCMI interrupt sources
+  * @{
+  */
+#define DCMI_IT_FRAME    ((uint32_t)DCMI_IER_FRAME_IE)
+#define DCMI_IT_OVF      ((uint32_t)DCMI_IER_OVF_IE)
+#define DCMI_IT_ERR      ((uint32_t)DCMI_IER_ERR_IE)
+#define DCMI_IT_VSYNC    ((uint32_t)DCMI_IER_VSYNC_IE)
+#define DCMI_IT_LINE     ((uint32_t)DCMI_IER_LINE_IE)
+/**
+  * @}
+  */
+
+/** @defgroup DCMI_Flags DCMI Flags
+  * @{
+  */
+
+/** 
+  * @brief   DCMI SR register
+  */ 
+#define DCMI_FLAG_HSYNC     ((uint32_t)0x2001)
+#define DCMI_FLAG_VSYNC     ((uint32_t)0x2002)
+#define DCMI_FLAG_FNE       ((uint32_t)0x2004)
+/** 
+  * @brief   DCMI RISR register  
+  */ 
+#define DCMI_FLAG_FRAMERI    ((uint32_t)DCMI_RISR_FRAME_RIS)
+#define DCMI_FLAG_OVFRI      ((uint32_t)DCMI_RISR_OVF_RIS)
+#define DCMI_FLAG_ERRRI      ((uint32_t)DCMI_RISR_ERR_RIS)
+#define DCMI_FLAG_VSYNCRI    ((uint32_t)DCMI_RISR_VSYNC_RIS)
+#define DCMI_FLAG_LINERI     ((uint32_t)DCMI_RISR_LINE_RIS)
+/** 
+  * @brief   DCMI MISR register  
+  */ 
+#define DCMI_FLAG_FRAMEMI    ((uint32_t)0x1001)
+#define DCMI_FLAG_OVFMI      ((uint32_t)0x1002)
+#define DCMI_FLAG_ERRMI      ((uint32_t)0x1004)
+#define DCMI_FLAG_VSYNCMI    ((uint32_t)0x1008)
+#define DCMI_FLAG_LINEMI     ((uint32_t)0x1010)
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+ 
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Macros DCMI Exported Macros
+  * @{
+  */
+  
+/** @brief Reset DCMI handle state
+  * @param  __HANDLE__: specifies the DCMI handle.
+  * @retval None
+  */
+#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DCMI_STATE_RESET)
+
+/**
+  * @brief  Enable the DCMI.
+  * @param  __HANDLE__: DCMI handle
+  * @retval None
+  */
+#define __HAL_DCMI_ENABLE(__HANDLE__)    ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE)
+
+/**
+  * @brief  Disable the DCMI.
+  * @param  __HANDLE__: DCMI handle
+  * @retval None
+  */
+#define __HAL_DCMI_DISABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE))
+
+/* Interrupt & Flag management */
+/**
+  * @brief  Get the DCMI pending flags.
+  * @param  __HANDLE__: DCMI handle
+  * @param  __FLAG__: Get the specified flag.
+  *         This parameter can be any combination of the following values:
+  *            @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+  *            @arg DCMI_FLAG_OVFRI: Overflow flag mask
+  *            @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+  *            @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+  *            @arg DCMI_FLAG_LINERI: Line flag mask
+  * @retval The state of FLAG.
+  */
+#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\
+((((__FLAG__) & 0x3000) == 0x0)? ((__HANDLE__)->Instance->RISR & (__FLAG__)) :\
+ (((__FLAG__) & 0x2000) == 0x0)? ((__HANDLE__)->Instance->MISR & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__)))
+
+/**
+  * @brief  Clear the DCMI pending flags.
+  * @param  __HANDLE__: DCMI handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *         This parameter can be any combination of the following values:
+  *            @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+  *            @arg DCMI_FLAG_OVFRI: Overflow flag mask
+  *            @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+  *            @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+  *            @arg DCMI_FLAG_LINERI: Line flag mask
+  * @retval None
+  */
+#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+  * @brief  Enable the specified DCMI interrupts.
+  * @param  __HANDLE__:    DCMI handle
+  * @param  __INTERRUPT__: specifies the DCMI interrupt sources to be enabled. 
+  *         This parameter can be any combination of the following values:
+  *            @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+  *            @arg DCMI_IT_OVF: Overflow interrupt mask
+  *            @arg DCMI_IT_ERR: Synchronization error interrupt mask
+  *            @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+  *            @arg DCMI_IT_LINE: Line interrupt mask
+  * @retval None
+  */
+#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified DCMI interrupts.
+  * @param  __HANDLE__: DCMI handle
+  * @param  __INTERRUPT__: specifies the DCMI interrupt sources to be enabled. 
+  *         This parameter can be any combination of the following values:
+  *            @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+  *            @arg DCMI_IT_OVF: Overflow interrupt mask
+  *            @arg DCMI_IT_ERR: Synchronization error interrupt mask
+  *            @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+  *            @arg DCMI_IT_LINE: Line interrupt mask
+  * @retval None
+  */
+#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified DCMI interrupt has occurred or not.
+  * @param  __HANDLE__: DCMI handle
+  * @param  __INTERRUPT__: specifies the DCMI interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+  *            @arg DCMI_IT_OVF: Overflow interrupt mask
+  *            @arg DCMI_IT_ERR: Synchronization error interrupt mask
+  *            @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+  *            @arg DCMI_IT_LINE: Line interrupt mask
+  * @retval The state of INTERRUPT.
+  */
+#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))
+
+/**
+  * @}
+  */
+  
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DCMI_Exported_Functions DCMI Exported Functions
+  * @{
+  */
+
+/** @addtogroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi);
+void       HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi);
+/**
+  * @}
+  */
+  
+/** @addtogroup DCMI_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi);
+void       HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi);
+/**
+  * @}
+  */
+  
+/** @addtogroup DCMI_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef     HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize);
+HAL_StatusTypeDef     HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef     HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi);
+/**
+  * @}
+  */
+  
+/** @addtogroup DCMI_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi);
+uint32_t              HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/   
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup DCMI_Private_Macros DCMI Private Macros
+  * @{
+  */
+#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \
+                                   ((MODE) == DCMI_MODE_SNAPSHOT))
+																			 
+#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \
+                              ((MODE) == DCMI_SYNCHRO_EMBEDDED))
+																	
+#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \
+                                      ((POLARITY) == DCMI_PCKPOLARITY_RISING))
+																					
+#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \
+                                     ((POLARITY) == DCMI_VSPOLARITY_HIGH))
+																				 
+#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \
+                                     ((POLARITY) == DCMI_HSPOLARITY_HIGH))
+																				 
+#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \
+                                     ((JPEG_MODE) == DCMI_JPEG_ENABLE))
+																				 
+#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME)         || \
+                                    ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \
+                                    ((RATE) == DCMI_CR_ALTERNATE_4_FRAME))
+																				
+#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B)  || \
+                                    ((DATA) == DCMI_EXTEND_DATA_10B) || \
+                                    ((DATA) == DCMI_EXTEND_DATA_12B) || \
+                                    ((DATA) == DCMI_EXTEND_DATA_14B))
+																				
+#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE)
+
+#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT)
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DCMI_Private_Functions DCMI Private Functions
+  * @{
+  */
+  
+/**
+  * @}
+  */
+      
+/**
+  * @}
+  */
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_DCMI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dcmi_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,201 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dcmi_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   DCMI Extension HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of DCMI extension peripheral:
+  *           + Extension features functions 
+  *           
+  @verbatim      
+  ==============================================================================
+               ##### DCMI peripheral extension features  #####
+  ==============================================================================
+           
+  [..]  Support of Black and White cameras 
+   
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..] This driver provides functions to manage the Black and White feature
+    
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+/** @defgroup DCMIEx DCMIEx
+  * @brief DCMI Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DCMIEx_Exported_Functions DCMIEx Exported Functions
+  * @{
+  */
+
+/** @defgroup DCMIEx_Exported_Functions_Group1 Initialization and Configuration functions
+ *  @brief   Initialization and Configuration functions
+ *
+@verbatim   
+ ===============================================================================
+                ##### Initialization and Configuration functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the DCMI
+      (+) De-initialize the DCMI 
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Initializes the DCMI according to the specified
+  *         parameters in the DCMI_InitTypeDef and create the associated handle.
+  * @param  hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
+  *                the configuration information for DCMI.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi)
+{     
+  /* Check the DCMI peripheral state */
+  if(hdcmi == NULL)
+  {
+     return HAL_ERROR;
+  }
+  
+  /* Check function parameters */
+  assert_param(IS_DCMI_ALL_INSTANCE(hdcmi->Instance));
+  assert_param(IS_DCMI_PCKPOLARITY(hdcmi->Init.PCKPolarity));
+  assert_param(IS_DCMI_VSPOLARITY(hdcmi->Init.VSPolarity));
+  assert_param(IS_DCMI_HSPOLARITY(hdcmi->Init.HSPolarity));
+  assert_param(IS_DCMI_SYNCHRO(hdcmi->Init.SynchroMode));
+  assert_param(IS_DCMI_CAPTURE_RATE(hdcmi->Init.CaptureRate));
+  assert_param(IS_DCMI_EXTENDED_DATA(hdcmi->Init.ExtendedDataMode));
+  assert_param(IS_DCMI_MODE_JPEG(hdcmi->Init.JPEGMode));
+
+  assert_param(IS_DCMI_BYTE_SELECT_MODE(hdcmi->Init.ByteSelectMode));
+  assert_param(IS_DCMI_BYTE_SELECT_START(hdcmi->Init.ByteSelectStart));
+  assert_param(IS_DCMI_LINE_SELECT_MODE(hdcmi->Init.LineSelectMode));
+  assert_param(IS_DCMI_LINE_SELECT_START(hdcmi->Init.LineSelectStart));
+                
+  if(hdcmi->State == HAL_DCMI_STATE_RESET)
+  {
+    /* Init the low level hardware */
+    HAL_DCMI_MspInit(hdcmi);
+  } 
+  
+  /* Change the DCMI state */
+  hdcmi->State = HAL_DCMI_STATE_BUSY; 
+                          /* Configures the HS, VS, DE and PC polarity */
+  hdcmi->Instance->CR &= ~(DCMI_CR_PCKPOL | DCMI_CR_HSPOL  | DCMI_CR_VSPOL  | DCMI_CR_EDM_0 |\
+                           DCMI_CR_EDM_1  | DCMI_CR_FCRC_0 | DCMI_CR_FCRC_1 | DCMI_CR_JPEG  |\
+                           DCMI_CR_ESS | DCMI_CR_BSM_0 | DCMI_CR_BSM_1 | DCMI_CR_OEBS |\
+                           DCMI_CR_LSM | DCMI_CR_OELS);
+
+  hdcmi->Instance->CR |=  (uint32_t)(hdcmi->Init.SynchroMode | hdcmi->Init.CaptureRate |\
+                                     hdcmi->Init.VSPolarity  | hdcmi->Init.HSPolarity  |\
+                                     hdcmi->Init.PCKPolarity | hdcmi->Init.ExtendedDataMode |\
+                                     hdcmi->Init.JPEGMode | hdcmi->Init.ByteSelectMode |\
+                                     hdcmi->Init.ByteSelectStart | hdcmi->Init.LineSelectMode |\
+                                     hdcmi->Init.LineSelectStart);
+                                     
+  if(hdcmi->Init.SynchroMode == DCMI_SYNCHRO_EMBEDDED)
+  {
+    DCMI->ESCR = (((uint32_t)hdcmi->Init.SyncroCode.FrameStartCode)    |
+                  ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode << 8)|
+                  ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode << 16) |
+                  ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode << 24));
+
+  }
+
+  /* Enable the Line interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE);
+
+  /* Enable the VSYNC interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_VSYNC);
+
+  /* Enable the Frame capture complete interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_FRAME);
+
+  /* Enable the Synchronization error interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_ERR);
+
+  /* Enable the Overflow interrupt */
+  __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_OVF);
+
+  /* Enable DCMI by setting DCMIEN bit */
+  __HAL_DCMI_ENABLE(hdcmi);
+
+  /* Update error code */
+  hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
+  
+  /* Initialize the DCMI state*/
+  hdcmi->State  = HAL_DCMI_STATE_READY;
+
+  return HAL_OK;
+}
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+#endif /* HAL_DCMI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dcmi_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,213 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dcmi_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of DCMI Extension HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DCMI_EX_H
+#define __STM32F7xx_HAL_DCMI_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DCMIEx DCMIEx
+  * @{
+  */ 
+ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DCMIEx_Exported_Types DCMIEx Exported Types
+  * @{
+  */
+/** 
+  * @brief   DCMIEx Embedded Synchronisation CODE Init structure definition
+  */ 
+typedef struct
+{
+  uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
+  uint8_t LineStartCode;  /*!< Specifies the code of the line start delimiter.  */
+  uint8_t LineEndCode;    /*!< Specifies the code of the line end delimiter.    */
+  uint8_t FrameEndCode;   /*!< Specifies the code of the frame end delimiter.   */
+}DCMI_CodesInitTypeDef;
+
+/** 
+  * @brief   DCMI Init structure definition
+  */  
+typedef struct
+{
+  uint32_t  SynchroMode;                /*!< Specifies the Synchronization Mode: Hardware or Embedded.
+                                             This parameter can be a value of @ref DCMI_Synchronization_Mode */
+
+  uint32_t  PCKPolarity;                /*!< Specifies the Pixel clock polarity: Falling or Rising.
+                                             This parameter can be a value of @ref DCMI_PIXCK_Polarity       */
+
+  uint32_t  VSPolarity;                 /*!< Specifies the Vertical synchronization polarity: High or Low.
+                                             This parameter can be a value of @ref DCMI_VSYNC_Polarity       */
+
+  uint32_t  HSPolarity;                 /*!< Specifies the Horizontal synchronization polarity: High or Low.
+                                             This parameter can be a value of @ref DCMI_HSYNC_Polarity       */
+
+  uint32_t  CaptureRate;                /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
+                                             This parameter can be a value of @ref DCMI_Capture_Rate         */
+
+  uint32_t  ExtendedDataMode;           /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
+                                             This parameter can be a value of @ref DCMI_Extended_Data_Mode   */
+
+  DCMI_CodesInitTypeDef SyncroCode;     /*!< Specifies the code of the frame start delimiter.                */
+
+  uint32_t JPEGMode;                    /*!< Enable or Disable the JPEG mode.                                
+                                             This parameter can be a value of @ref DCMI_MODE_JPEG            */
+
+  uint32_t ByteSelectMode;              /*!< Specifies the data to be captured by the interface 
+                                            This parameter can be a value of @ref DCMIEx_Byte_Select_Mode      */
+                                            
+  uint32_t ByteSelectStart;             /*!< Specifies if the data to be captured by the interface is even or odd
+                                            This parameter can be a value of @ref DCMIEx_Byte_Select_Start     */
+
+  uint32_t LineSelectMode;              /*!< Specifies the line of data to be captured by the interface 
+                                            This parameter can be a value of @ref DCMIEx_Line_Select_Mode      */
+                                            
+  uint32_t LineSelectStart;             /*!< Specifies if the line of data to be captured by the interface is even or odd
+                                            This parameter can be a value of @ref DCMIEx_Line_Select_Start     */
+}DCMI_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DCMIEx_Exported_Constants DCMIEx Exported Constants
+  * @{
+  */
+
+/** @defgroup DCMIEx_Byte_Select_Mode DCMIEx Byte Select Mode
+  * @{
+  */
+#define DCMI_BSM_ALL                 ((uint32_t)0x00000000) /*!< Interface captures all received data */
+#define DCMI_BSM_OTHER               ((uint32_t)DCMI_CR_BSM_0) /*!< Interface captures every other byte from the received data */
+#define DCMI_BSM_ALTERNATE_4         ((uint32_t)DCMI_CR_BSM_1) /*!< Interface captures one byte out of four */
+#define DCMI_BSM_ALTERNATE_2         ((uint32_t)(DCMI_CR_BSM_0 | DCMI_CR_BSM_1)) /*!< Interface captures two bytes out of four */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMIEx_Byte_Select_Start DCMIEx Byte Select Start
+  * @{
+  */ 
+#define DCMI_OEBS_ODD               ((uint32_t)0x00000000) /*!< Interface captures first data from the frame/line start, second one being dropped */
+#define DCMI_OEBS_EVEN              ((uint32_t)DCMI_CR_OEBS) /*!< Interface captures second data from the frame/line start, first one being dropped */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMIEx_Line_Select_Mode DCMIEx Line Select Mode
+  * @{
+  */
+#define DCMI_LSM_ALL                 ((uint32_t)0x00000000) /*!< Interface captures all received lines */
+#define DCMI_LSM_ALTERNATE_2         ((uint32_t)DCMI_CR_LSM) /*!< Interface captures one line out of two */
+
+/**
+  * @}
+  */
+
+/** @defgroup DCMIEx_Line_Select_Start DCMIEx Line Select Start
+  * @{
+  */ 
+#define DCMI_OELS_ODD               ((uint32_t)0x00000000) /*!< Interface captures first line from the frame start, second one being dropped */
+#define DCMI_OELS_EVEN              ((uint32_t)DCMI_CR_OELS) /*!< Interface captures second line from the frame start, first one being dropped */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/      
+/* Exported functions --------------------------------------------------------*/
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/   
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup DCMIEx_Private_Macros DCMIEx Private Macros
+  * @{
+  */
+#define IS_DCMI_BYTE_SELECT_MODE(MODE)(((MODE) == DCMI_BSM_ALL) || \
+                                       ((MODE) == DCMI_BSM_OTHER) || \
+                                       ((MODE) == DCMI_BSM_ALTERNATE_4) || \
+                                       ((MODE) == DCMI_BSM_ALTERNATE_2))
+                                                                                                
+#define IS_DCMI_BYTE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OEBS_ODD) || \
+                                            ((POLARITY) == DCMI_OEBS_EVEN))
+                              
+#define IS_DCMI_LINE_SELECT_MODE(MODE)(((MODE) == DCMI_LSM_ALL) || \
+                                       ((MODE) == DCMI_LSM_ALTERNATE_2))
+                                      
+#define IS_DCMI_LINE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OELS_ODD) || \
+                                            ((POLARITY) == DCMI_OELS_EVEN))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @}
+  */
+    
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_DCMI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_def.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,213 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_def.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   This file contains HAL common defines, enumeration, macros and 
+  *          structures definitions. 
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DEF
+#define __STM32F7xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx.h"
+#include "stm32_hal_legacy.h"
+#include <stdio.h>
+/* Exported types ------------------------------------------------------------*/
+
+/** 
+  * @brief  HAL Status structures definition  
+  */  
+typedef enum 
+{
+  HAL_OK       = 0x00,
+  HAL_ERROR    = 0x01,
+  HAL_BUSY     = 0x02,
+  HAL_TIMEOUT  = 0x03
+} HAL_StatusTypeDef;
+
+/** 
+  * @brief  HAL Lock structures definition  
+  */
+typedef enum 
+{
+  HAL_UNLOCKED = 0x00,
+  HAL_LOCKED   = 0x01  
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#define HAL_MAX_DELAY      0xFFFFFFFF
+
+#define HAL_IS_BIT_SET(REG, BIT)         (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT)         (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__)               \
+                        do{                                                      \
+                              (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+                              (__DMA_HANDLE__).Parent = (__HANDLE__);             \
+                          } while(0)
+
+#define UNUSED(x) ((void)(x))
+
+/** @brief Reset the Handle's State field.
+  * @param __HANDLE__: specifies the Peripheral Handle.
+  * @note  This macro can be used for the following purpose: 
+  *          - When the Handle is declared as local variable; before passing it as parameter
+  *            to HAL_PPP_Init() for the first time, it is mandatory to use this macro 
+  *            to set to 0 the Handle's "State" field.
+  *            Otherwise, "State" field may have any random value and the first time the function 
+  *            HAL_PPP_Init() is called, the low level hardware initialization will be missed
+  *            (i.e. HAL_PPP_MspInit() will not be executed).
+  *          - When there is a need to reconfigure the low level hardware: instead of calling
+  *            HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+  *            In this later function, when the Handle's "State" field is set to 0, it will execute the function
+  *            HAL_PPP_MspInit() which will reconfigure the low level hardware.
+  * @retval None
+  */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
+
+#if (USE_RTOS == 1)
+  /* Reserved for future use */
+  #error "USE_RTOS should be 0 in the current HAL release"
+#else
+  #define __HAL_LOCK(__HANDLE__)                                           \
+                                do{                                        \
+                                    if((__HANDLE__)->Lock == HAL_LOCKED)   \
+                                    {                                      \
+                                       return HAL_BUSY;                    \
+                                    }                                      \
+                                    else                                   \
+                                    {                                      \
+                                       (__HANDLE__)->Lock = HAL_LOCKED;    \
+                                    }                                      \
+                                  }while (0)
+
+  #define __HAL_UNLOCK(__HANDLE__)                                          \
+                                  do{                                       \
+                                      (__HANDLE__)->Lock = HAL_UNLOCKED;    \
+                                    }while (0)
+#endif /* USE_RTOS */
+
+#if  defined ( __GNUC__ )
+  #ifndef __weak
+    #define __weak   __attribute__((weak))
+  #endif /* __weak */
+  #ifndef __packed
+    #define __packed __attribute__((__packed__))
+  #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined   (__GNUC__)        /* GNU Compiler */
+  #ifndef __ALIGN_END
+    #define __ALIGN_END    __attribute__ ((aligned (4)))
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN  
+    #define __ALIGN_BEGIN
+  #endif /* __ALIGN_BEGIN */
+#else
+  #ifndef __ALIGN_END
+    #define __ALIGN_END
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN      
+    #if defined   (__CC_ARM)      /* ARM Compiler */
+      #define __ALIGN_BEGIN    __align(4)  
+    #elif defined (__ICCARM__)    /* IAR Compiler */
+      #define __ALIGN_BEGIN 
+    #endif /* __CC_ARM */
+  #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+
+/** 
+  * @brief  __RAM_FUNC definition
+  */ 
+#if defined ( __CC_ARM   )
+/* ARM Compiler
+   ------------
+   RAM functions are defined using the toolchain options. 
+   Functions that are executed in RAM should reside in a separate source module.
+   Using the 'Options for File' dialog you can simply change the 'Code / Const' 
+   area of a module to a memory space in physical RAM.
+   Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+   dialog. 
+*/
+#define __RAM_FUNC HAL_StatusTypeDef 
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+   RAM functions are defined using a specific toolchain keyword "__ramfunc". 
+*/
+#define __RAM_FUNC __ramfunc HAL_StatusTypeDef
+
+#elif defined   (  __GNUC__  )
+/* GNU Compiler
+   ------------
+  RAM functions are defined using a specific toolchain attribute 
+   "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC HAL_StatusTypeDef  __attribute__((section(".RamFunc")))
+
+#endif
+
+/** 
+  * @brief  __NOINLINE definition
+  */ 
+#if defined ( __CC_ARM   ) || defined   (  __GNUC__  )
+/* ARM & GNUCompiler 
+   ---------------- 
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+   ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F7xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dma.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,950 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dma.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   DMA HAL module driver.
+  *    
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Direct Memory Access (DMA) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State and errors functions
+  @verbatim     
+  ==============================================================================      
+                        ##### How to use this driver #####
+  ============================================================================== 
+  [..]
+   (#) Enable and configure the peripheral to be connected to the DMA Stream
+       (except for internal SRAM/FLASH memories: no initialization is 
+       necessary) please refer to Reference manual for connection between peripherals
+       and DMA requests . 
+          
+   (#) For a given Stream, program the required configuration through the following parameters:   
+       Transfer Direction, Source and Destination data formats, 
+       Circular, Normal or peripheral flow control mode, Stream Priority level, 
+       Source and Destination Increment mode, FIFO mode and its Threshold (if needed), 
+       Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function.
+                     
+     *** Polling mode IO operation ***
+     =================================   
+    [..] 
+          (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source 
+              address and destination address and the Length of data to be transferred
+          (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this  
+              case a fixed Timeout can be configured by User depending from his application.
+               
+     *** Interrupt mode IO operation ***    
+     =================================== 
+    [..]     
+          (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
+          (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ() 
+          (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of  
+              Source address and destination address and the Length of data to be transferred. In this 
+              case the DMA interrupt is configured 
+          (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
+          (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can 
+              add his own function by customization of function pointer XferCpltCallback and 
+              XferErrorCallback (i.e a member of DMA handle structure). 
+    [..]                
+     (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error 
+         detection.
+         
+     (#) Use HAL_DMA_Abort() function to abort the current transfer
+     
+     -@-   In Memory-to-Memory transfer mode, Circular mode is not allowed.
+    
+     -@-   The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is
+           possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set
+           Half-Word data size for the peripheral to access its data register and set Word data size
+           for the Memory to gain in access time. Each two half words will be packed and written in
+           a single access to a Word in the Memory).
+      
+     -@-   When FIFO is disabled, it is not allowed to configure different Data Sizes for Source
+           and Destination. In this case the Peripheral Data Size will be applied to both Source
+           and Destination.               
+  
+     *** DMA HAL driver macros list ***
+     ============================================= 
+     [..]
+       Below the list of most used macros in DMA HAL driver.
+       
+      (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream.
+      (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream.
+      (+) __HAL_DMA_GET_FS: Return the current DMA Stream FIFO filled level.
+      (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Stream interrupts.
+      (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Stream interrupts.
+      (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not. 
+     
+     [..] 
+      (@) You can refer to the DMA HAL driver header file for more useful macros  
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DMA DMA
+  * @brief DMA HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+typedef struct
+{
+  __IO uint32_t ISR;   /*!< DMA interrupt status register */
+  __IO uint32_t Reserved0;
+  __IO uint32_t IFCR;  /*!< DMA interrupt flag clear register */
+} DMA_Base_Registers;
+
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup DMA_Private_Constants
+ * @{
+ */
+ #define HAL_TIMEOUT_DMA_ABORT    ((uint32_t)1000)  /* 1s */
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DMA_Private_Functions
+  * @{
+  */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma);
+
+/**
+  * @brief  Sets the DMA Transfer parameter.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+  /* Clear DBM bit */
+  hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM);
+	
+  /* Configure DMA Stream data length */
+  hdma->Instance->NDTR = DataLength;
+
+  /* Peripheral to Memory */
+  if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+  {
+    /* Configure DMA Stream destination address */
+    hdma->Instance->PAR = DstAddress;
+
+    /* Configure DMA Stream source address */
+    hdma->Instance->M0AR = SrcAddress;
+  }
+  /* Memory to Peripheral */
+  else
+  {
+    /* Configure DMA Stream source address */
+    hdma->Instance->PAR = SrcAddress;
+    
+    /* Configure DMA Stream destination address */
+    hdma->Instance->M0AR = DstAddress;
+  }
+}
+
+/**
+  * @}
+  */  
+  
+/* Exported functions ---------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group1
+  *
+@verbatim   
+ ===============================================================================
+             ##### Initialization and de-initialization functions  #####
+ ===============================================================================  
+    [..]
+    This section provides functions allowing to initialize the DMA Stream source
+    and destination addresses, incrementation and data sizes, transfer direction, 
+    circular/normal mode selection, memory-to-memory mode selection and Stream priority value.
+    [..]
+    The HAL_DMA_Init() function follows the DMA configuration procedures as described in
+    reference manual.  
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Initializes the DMA according to the specified
+  *         parameters in the DMA_InitTypeDef and create the associated handle.
+  * @param  hdma: Pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Stream.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
+{ 
+  uint32_t tmp = 0;
+  
+  /* Check the DMA peripheral state */
+  if(hdma == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
+  assert_param(IS_DMA_CHANNEL(hdma->Init.Channel));
+  assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
+  assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
+  assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
+  assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
+  assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
+  assert_param(IS_DMA_MODE(hdma->Init.Mode));
+  assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
+  assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode));
+  /* Check the memory burst, peripheral burst and FIFO threshold parameters only
+     when FIFO mode is enabled */
+  if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE)
+  {
+    assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold));
+    assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst));
+    assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst));
+  }
+
+  /* Change DMA peripheral state */
+  hdma->State = HAL_DMA_STATE_BUSY;
+
+  /* Get the CR register value */
+  tmp = hdma->Instance->CR;
+
+  /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */
+  tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \
+                      DMA_SxCR_PL    | DMA_SxCR_MSIZE  | DMA_SxCR_PSIZE  | \
+                      DMA_SxCR_MINC  | DMA_SxCR_PINC   | DMA_SxCR_CIRC   | \
+                      DMA_SxCR_DIR   | DMA_SxCR_CT     | DMA_SxCR_DBM));
+
+  /* Prepare the DMA Stream configuration */
+  tmp |=  hdma->Init.Channel             | hdma->Init.Direction        |
+          hdma->Init.PeriphInc           | hdma->Init.MemInc           |
+          hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
+          hdma->Init.Mode                | hdma->Init.Priority;
+
+  /* the Memory burst and peripheral burst are not used when the FIFO is disabled */
+  if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
+  {
+    /* Get memory burst and peripheral burst */
+    tmp |=  hdma->Init.MemBurst | hdma->Init.PeriphBurst;
+  }
+  
+  /* Write to DMA Stream CR register */
+  hdma->Instance->CR = tmp;  
+
+  /* Get the FCR register value */
+  tmp = hdma->Instance->FCR;
+
+  /* Clear Direct mode and FIFO threshold bits */
+  tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH);
+
+  /* Prepare the DMA Stream FIFO configuration */
+  tmp |= hdma->Init.FIFOMode;
+
+  /* the FIFO threshold is not used when the FIFO mode is disabled */
+  if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
+  {
+    /* Get the FIFO threshold */
+    tmp |= hdma->Init.FIFOThreshold;
+  }
+  
+  /* Write to DMA Stream FCR */
+  hdma->Instance->FCR = tmp;
+
+  /* Initialize StreamBaseAddress and StreamIndex parameters to be used to calculate
+     DMA steam Base Address needed by HAL_DMA_IRQHandler() and HAL_DMA_PollForTransfer() */
+  DMA_CalcBaseAndBitshift(hdma);
+	
+  /* Initialize the error code */
+  hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+  /* Initialize the DMA state */
+  hdma->State = HAL_DMA_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the DMA peripheral 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Stream.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
+{
+	DMA_Base_Registers *regs;
+	
+  /* Check the DMA peripheral state */
+  if(hdma == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the DMA peripheral state */
+  if(hdma->State == HAL_DMA_STATE_BUSY)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Disable the selected DMA Streamx */
+  __HAL_DMA_DISABLE(hdma);
+
+  /* Reset DMA Streamx control register */
+  hdma->Instance->CR   = 0;
+
+  /* Reset DMA Streamx number of data to transfer register */
+  hdma->Instance->NDTR = 0;
+
+  /* Reset DMA Streamx peripheral address register */
+  hdma->Instance->PAR  = 0;
+
+  /* Reset DMA Streamx memory 0 address register */
+  hdma->Instance->M0AR = 0;
+
+  /* Reset DMA Streamx memory 1 address register */
+  hdma->Instance->M1AR = 0;
+
+  /* Reset DMA Streamx FIFO control register */
+  hdma->Instance->FCR  = (uint32_t)0x00000021;
+
+  /* Get DMA steam Base Address */  
+  regs = (DMA_Base_Registers *)DMA_CalcBaseAndBitshift(hdma);
+  
+  /* Clear all interrupt flags at correct offset within the register */
+  regs->IFCR = 0x3F << hdma->StreamIndex;
+
+  /* Initialize the error code */
+  hdma->ErrorCode = HAL_DMA_ERROR_NONE;
+
+  /* Initialize the DMA state */
+  hdma->State = HAL_DMA_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hdma);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group2
+  *
+@verbatim   
+ ===============================================================================
+                      #####  IO operation functions  #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Configure the source, destination address and data length and Start DMA transfer
+      (+) Configure the source, destination address and data length and 
+          Start DMA transfer with interrupt
+      (+) Abort DMA transfer
+      (+) Poll for transfer complete
+      (+) Handle DMA interrupt request  
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the DMA Transfer.
+  * @param  hdma      : pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.  
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma);
+
+  /* Change DMA peripheral state */
+  hdma->State = HAL_DMA_STATE_BUSY;
+
+   /* Check the parameters */
+  assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+  /* Disable the peripheral */
+  __HAL_DMA_DISABLE(hdma);
+
+  /* Configure the source, destination address and the data length */
+  DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+  /* Enable the Peripheral */
+  __HAL_DMA_ENABLE(hdma);
+
+  return HAL_OK; 
+}
+
+/**
+  * @brief  Start the DMA Transfer with interrupt enabled.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.  
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma);
+
+  /* Change DMA peripheral state */
+  hdma->State = HAL_DMA_STATE_BUSY;
+
+   /* Check the parameters */
+  assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+  /* Disable the peripheral */
+  __HAL_DMA_DISABLE(hdma);
+
+  /* Configure the source, destination address and the data length */
+  DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+  /* Enable all interrupts */
+  hdma->Instance->CR  |= DMA_IT_TC | DMA_IT_HT | DMA_IT_TE | DMA_IT_DME;
+  hdma->Instance->FCR |= DMA_IT_FE;
+
+   /* Enable the Peripheral */
+  __HAL_DMA_ENABLE(hdma);
+
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Aborts the DMA Transfer.
+  * @param  hdma  : pointer to a DMA_HandleTypeDef structure that contains
+  *                 the configuration information for the specified DMA Stream.
+  *                   
+  * @note  After disabling a DMA Stream, a check for wait until the DMA Stream is 
+  *        effectively disabled is added. If a Stream is disabled 
+  *        while a data transfer is ongoing, the current data will be transferred
+  *        and the Stream will be effectively disabled only after the transfer of
+  *        this single data is finished.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
+{
+  uint32_t tickstart = 0;
+
+  /* Disable the stream */
+  __HAL_DMA_DISABLE(hdma);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check if the DMA Stream is effectively disabled */
+  while((hdma->Instance->CR & DMA_SxCR_EN) != 0)
+  {
+    /* Check for the Timeout */
+    if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
+    {
+      /* Update error code */
+      hdma->ErrorCode |= HAL_DMA_ERROR_TIMEOUT;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma);
+      
+      /* Change the DMA state */
+      hdma->State = HAL_DMA_STATE_TIMEOUT;
+      
+      return HAL_TIMEOUT;
+    }
+  }
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdma);
+
+  /* Change the DMA state*/
+  hdma->State = HAL_DMA_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Polling for transfer complete.
+  * @param  hdma:          pointer to a DMA_HandleTypeDef structure that contains
+  *                        the configuration information for the specified DMA Stream.
+  * @param  CompleteLevel: Specifies the DMA level complete.  
+  * @param  Timeout:       Timeout duration.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout)
+{
+  uint32_t temp, tmp, tmp1, tmp2;
+  uint32_t tickstart = 0; 
+
+  /* calculate DMA base and stream number */
+  DMA_Base_Registers *regs;
+  
+  regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+	
+  /* Get the level transfer complete flag */
+  if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
+  {
+    /* Transfer Complete flag */
+		temp = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
+  }
+  else
+  {
+    /* Half Transfer Complete flag */
+		temp = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
+  }
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while((regs->ISR & temp) == RESET)
+  {
+    tmp  = regs->ISR & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex);
+    tmp1 = regs->ISR & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex);
+    tmp2 = regs->ISR & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex);
+    if((tmp != RESET) || (tmp1 != RESET) || (tmp2 != RESET))
+    {
+      if(tmp != RESET)
+      {
+        /* Update error code */
+        hdma->ErrorCode |= HAL_DMA_ERROR_TE;
+
+        /* Clear the transfer error flag */
+        regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex;
+      }
+      if(tmp1 != RESET)
+      {
+        /* Update error code */
+        hdma->ErrorCode |= HAL_DMA_ERROR_FE;
+ 
+        /* Clear the FIFO error flag */
+        regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex;
+      }
+      if(tmp2 != RESET)
+      {
+        /* Update error code */
+        hdma->ErrorCode |= HAL_DMA_ERROR_DME;
+
+        /* Clear the Direct Mode error flag */
+        regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex;
+      }
+      /* Change the DMA state */
+      hdma->State= HAL_DMA_STATE_ERROR;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma);
+
+      return HAL_ERROR;
+    }  
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Update error code */
+        hdma->ErrorCode |= HAL_DMA_ERROR_TIMEOUT;
+
+        /* Change the DMA state */
+        hdma->State = HAL_DMA_STATE_TIMEOUT;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hdma);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
+  {
+    /* Clear the half transfer and transfer complete flags */
+    regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex;
+		
+    /* Multi_Buffering mode enabled */
+    if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
+    {
+      /* Current memory buffer used is Memory 0 */
+      if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
+      {
+        /* Change DMA peripheral state */
+        hdma->State = HAL_DMA_STATE_READY_MEM0;
+      }
+      /* Current memory buffer used is Memory 1 */
+      else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
+      {
+        /* Change DMA peripheral state */
+        hdma->State = HAL_DMA_STATE_READY_MEM1;
+      }
+    }
+    else
+    {
+      /* The selected Streamx EN bit is cleared (DMA is disabled and all transfers
+         are complete) */
+      hdma->State = HAL_DMA_STATE_READY_MEM0;
+    }
+    /* Process Unlocked */
+    __HAL_UNLOCK(hdma);
+  }
+  else
+  {
+    /* Clear the half transfer complete flag */
+    regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
+		
+    /* Multi_Buffering mode enabled */
+    if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
+    {
+      /* Current memory buffer used is Memory 0 */
+      if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
+      {
+        /* Change DMA peripheral state */
+        hdma->State = HAL_DMA_STATE_READY_HALF_MEM0;
+      }
+      /* Current memory buffer used is Memory 1 */
+      else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
+      {
+        /* Change DMA peripheral state */
+        hdma->State = HAL_DMA_STATE_READY_HALF_MEM1;
+      }
+    }
+    else
+    {
+      /* Change DMA peripheral state */
+      hdma->State = HAL_DMA_STATE_READY_HALF_MEM0;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles DMA interrupt request.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Stream.  
+  * @retval None
+  */
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
+{
+  /* calculate DMA base and stream number */
+  DMA_Base_Registers *regs;
+
+  regs = (DMA_Base_Registers *)hdma->StreamBaseAddress;
+	
+  /* Transfer Error Interrupt management ***************************************/
+  if ((regs->ISR & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET)
+  {
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET)
+    {
+      /* Disable the transfer error interrupt */
+      __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE);
+
+      /* Clear the transfer error flag */
+      regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex;
+
+      /* Update error code */
+      hdma->ErrorCode |= HAL_DMA_ERROR_TE;
+
+      /* Change the DMA state */
+      hdma->State = HAL_DMA_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma); 
+
+      if(hdma->XferErrorCallback != NULL)
+      {
+        /* Transfer error callback */
+        hdma->XferErrorCallback(hdma);
+      }
+    }
+  }
+  /* FIFO Error Interrupt management ******************************************/
+  if ((regs->ISR & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET)
+  {
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET)
+    {
+      /* Disable the FIFO Error interrupt */
+      __HAL_DMA_DISABLE_IT(hdma, DMA_IT_FE);
+
+      /* Clear the FIFO error flag */
+      regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex;
+
+      /* Update error code */
+      hdma->ErrorCode |= HAL_DMA_ERROR_FE;
+
+      /* Change the DMA state */
+      hdma->State = HAL_DMA_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma);
+
+      if(hdma->XferErrorCallback != NULL)
+      {
+        /* Transfer error callback */
+        hdma->XferErrorCallback(hdma);
+      }
+    }
+  }
+  /* Direct Mode Error Interrupt management ***********************************/
+  if ((regs->ISR & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET)
+  {
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET)
+    {
+      /* Disable the direct mode Error interrupt */
+      __HAL_DMA_DISABLE_IT(hdma, DMA_IT_DME);
+
+      /* Clear the direct mode error flag */
+      regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex;
+
+      /* Update error code */
+      hdma->ErrorCode |= HAL_DMA_ERROR_DME;
+
+      /* Change the DMA state */
+      hdma->State = HAL_DMA_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma);
+
+      if(hdma->XferErrorCallback != NULL)
+      {
+        /* Transfer error callback */
+        hdma->XferErrorCallback(hdma);
+      }
+    }
+  }
+  /* Half Transfer Complete Interrupt management ******************************/
+  if ((regs->ISR & (DMA_FLAG_HTIF0_4 << hdma->StreamIndex)) != RESET)
+  {
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET)
+    { 
+      /* Multi_Buffering mode enabled */
+      if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
+      {
+        /* Clear the half transfer complete flag */
+        regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
+
+        /* Current memory buffer used is Memory 0 */
+        if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
+        {
+          /* Change DMA peripheral state */
+          hdma->State = HAL_DMA_STATE_READY_HALF_MEM0;
+        }
+        /* Current memory buffer used is Memory 1 */
+        else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
+        {
+          /* Change DMA peripheral state */
+          hdma->State = HAL_DMA_STATE_READY_HALF_MEM1;
+        }
+      }
+      else
+      {
+        /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
+        if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+        {
+          /* Disable the half transfer interrupt */
+          __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT);
+        }
+        /* Clear the half transfer complete flag */
+        regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex;
+
+        /* Change DMA peripheral state */
+        hdma->State = HAL_DMA_STATE_READY_HALF_MEM0;
+      }
+
+      if(hdma->XferHalfCpltCallback != NULL)
+      {
+        /* Half transfer callback */
+        hdma->XferHalfCpltCallback(hdma);
+      }
+    }
+  }
+  /* Transfer Complete Interrupt management ***********************************/
+  if ((regs->ISR & (DMA_FLAG_TCIF0_4 << hdma->StreamIndex)) != RESET)
+  {
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET)
+    {
+      if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
+      {
+        /* Clear the transfer complete flag */
+        regs->IFCR = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
+
+        /* Current memory buffer used is Memory 1 */
+        if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
+        {
+          if(hdma->XferM1CpltCallback != NULL)
+          {
+            /* Transfer complete Callback for memory1 */
+            hdma->XferM1CpltCallback(hdma);
+          }
+        }
+        /* Current memory buffer used is Memory 0 */
+        else if((hdma->Instance->CR & DMA_SxCR_CT) != 0) 
+        {
+          if(hdma->XferCpltCallback != NULL)
+          {
+            /* Transfer complete Callback for memory0 */
+            hdma->XferCpltCallback(hdma);
+          }
+        }
+      }
+      /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */
+      else
+      {
+        if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+        {
+          /* Disable the transfer complete interrupt */
+          __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TC);
+        }
+        /* Clear the transfer complete flag */
+        regs->IFCR = DMA_FLAG_TCIF0_4 << hdma->StreamIndex;
+
+        /* Update error code */
+        hdma->ErrorCode |= HAL_DMA_ERROR_NONE;
+
+        /* Change the DMA state */
+        hdma->State = HAL_DMA_STATE_READY_MEM0;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hdma);      
+
+        if(hdma->XferCpltCallback != NULL)
+        {
+          /* Transfer complete callback */
+          hdma->XferCpltCallback(hdma);
+        }
+      }
+    }
+  }
+}
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA_Exported_Functions_Group3
+  *
+@verbatim
+ ===============================================================================
+                    ##### State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection provides functions allowing to
+      (+) Check the DMA state
+      (+) Get error code
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the DMA state.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA Stream.
+  * @retval HAL state
+  */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
+{
+  return hdma->State;
+}
+
+/**
+  * @brief  Return the DMA error code
+  * @param  hdma : pointer to a DMA_HandleTypeDef structure that contains
+  *              the configuration information for the specified DMA Stream.
+  * @retval DMA Error Code
+  */
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
+{
+  return hdma->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  Returns the DMA Stream base address depending on stream number
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream. 
+  * @retval Stream base address
+  */
+static uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma)
+{
+  uint32_t stream_number = (((uint32_t)hdma->Instance & 0xFF) - 16) / 24;
+  
+  /* lookup table for necessary bitshift of flags within status registers */
+  static const uint8_t flagBitshiftOffset[8] = {0, 6, 16, 22, 0, 6, 16, 22};
+  hdma->StreamIndex = flagBitshiftOffset[stream_number];
+  
+  if (stream_number > 3)
+  {
+    /* return pointer to HISR and HIFCR */
+    hdma->StreamBaseAddress = (((uint32_t)hdma->Instance & (uint32_t)(~0x3FF)) + 4);
+  }
+  else
+  {
+    /* return pointer to LISR and LIFCR */
+    hdma->StreamBaseAddress = ((uint32_t)hdma->Instance & (uint32_t)(~0x3FF));
+  }
+  
+  return hdma->StreamBaseAddress;
+}
+/**
+  * @}
+  */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dma.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,777 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dma.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of DMA HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DMA_H
+#define __STM32F7xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DMA
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+  * @brief    DMA Exported Types 
+  * @{
+  */
+   
+/** 
+  * @brief  DMA Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Channel;              /*!< Specifies the channel used for the specified stream. 
+                                      This parameter can be a value of @ref DMA_Channel_selection                    */
+
+  uint32_t Direction;            /*!< Specifies if the data will be transferred from memory to peripheral, 
+                                      from memory to memory or from peripheral to memory.
+                                      This parameter can be a value of @ref DMA_Data_transfer_direction              */
+
+  uint32_t PeriphInc;            /*!< Specifies whether the Peripheral address register should be incremented or not.
+                                      This parameter can be a value of @ref DMA_Peripheral_incremented_mode          */
+
+  uint32_t MemInc;               /*!< Specifies whether the memory address register should be incremented or not.
+                                      This parameter can be a value of @ref DMA_Memory_incremented_mode              */
+
+  uint32_t PeriphDataAlignment;  /*!< Specifies the Peripheral data width.
+                                      This parameter can be a value of @ref DMA_Peripheral_data_size                 */
+
+  uint32_t MemDataAlignment;     /*!< Specifies the Memory data width.
+                                      This parameter can be a value of @ref DMA_Memory_data_size                     */
+
+  uint32_t Mode;                 /*!< Specifies the operation mode of the DMAy Streamx.
+                                      This parameter can be a value of @ref DMA_mode
+                                      @note The circular buffer mode cannot be used if the memory-to-memory
+                                            data transfer is configured on the selected Stream                        */
+
+  uint32_t Priority;             /*!< Specifies the software priority for the DMAy Streamx.
+                                      This parameter can be a value of @ref DMA_Priority_level                       */
+
+  uint32_t FIFOMode;             /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
+                                      This parameter can be a value of @ref DMA_FIFO_direct_mode
+                                      @note The Direct mode (FIFO mode disabled) cannot be used if the 
+                                            memory-to-memory data transfer is configured on the selected stream       */
+
+  uint32_t FIFOThreshold;        /*!< Specifies the FIFO threshold level.
+                                      This parameter can be a value of @ref DMA_FIFO_threshold_level                  */
+
+  uint32_t MemBurst;             /*!< Specifies the Burst transfer configuration for the memory transfers. 
+                                      It specifies the amount of data to be transferred in a single non interruptible 
+                                      transaction.
+                                      This parameter can be a value of @ref DMA_Memory_burst 
+                                      @note The burst mode is possible only if the address Increment mode is enabled. */
+
+  uint32_t PeriphBurst;          /*!< Specifies the Burst transfer configuration for the peripheral transfers. 
+                                      It specifies the amount of data to be transferred in a single non interruptible 
+                                      transaction. 
+                                      This parameter can be a value of @ref DMA_Peripheral_burst
+                                      @note The burst mode is possible only if the address Increment mode is enabled. */
+}DMA_InitTypeDef;
+
+/** 
+  * @brief  HAL DMA State structures definition
+  */
+typedef enum
+{
+  HAL_DMA_STATE_RESET             = 0x00,  /*!< DMA not yet initialized or disabled */
+  HAL_DMA_STATE_READY             = 0x01,  /*!< DMA initialized and ready for use   */
+  HAL_DMA_STATE_READY_MEM0        = 0x11,  /*!< DMA Mem0 process success            */
+  HAL_DMA_STATE_READY_MEM1        = 0x21,  /*!< DMA Mem1 process success            */
+  HAL_DMA_STATE_READY_HALF_MEM0   = 0x31,  /*!< DMA Mem0 Half process success       */
+  HAL_DMA_STATE_READY_HALF_MEM1   = 0x41,  /*!< DMA Mem1 Half process success       */
+  HAL_DMA_STATE_BUSY              = 0x02,  /*!< DMA process is ongoing              */
+  HAL_DMA_STATE_BUSY_MEM0         = 0x12,  /*!< DMA Mem0 process is ongoing         */
+  HAL_DMA_STATE_BUSY_MEM1         = 0x22,  /*!< DMA Mem1 process is ongoing         */
+  HAL_DMA_STATE_TIMEOUT           = 0x03,  /*!< DMA timeout state                   */
+  HAL_DMA_STATE_ERROR             = 0x04,  /*!< DMA error state                     */
+}HAL_DMA_StateTypeDef;
+
+/** 
+  * @brief  HAL DMA Error Code structure definition
+  */
+typedef enum
+{
+  HAL_DMA_FULL_TRANSFER      = 0x00,    /*!< Full transfer     */
+  HAL_DMA_HALF_TRANSFER      = 0x01,    /*!< Half Transfer     */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/** 
+  * @brief  DMA handle Structure definition
+  */
+typedef struct __DMA_HandleTypeDef
+{
+  DMA_Stream_TypeDef         *Instance;                                                    /*!< Register base address                  */
+
+  DMA_InitTypeDef            Init;                                                         /*!< DMA communication parameters           */ 
+
+  HAL_LockTypeDef            Lock;                                                         /*!< DMA locking object                     */  
+
+  __IO HAL_DMA_StateTypeDef  State;                                                        /*!< DMA transfer state                     */
+
+  void                       *Parent;                                                      /*!< Parent object state                    */  
+
+  void                       (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma);     /*!< DMA transfer complete callback         */
+
+  void                       (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback    */
+
+  void                       (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma);   /*!< DMA transfer complete Memory1 callback */
+
+  void                       (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma);    /*!< DMA transfer error callback            */
+
+ __IO uint32_t              ErrorCode;                                                    /*!< DMA Error code                          */
+
+ uint32_t                    StreamBaseAddress;                                            /*!< DMA Stream Base Address                */
+
+ uint32_t                    StreamIndex;                                                  /*!< DMA Stream Index                       */
+ 
+}DMA_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+  * @brief    DMA Exported constants 
+  * @{
+  */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+  * @brief    DMA Error Code 
+  * @{
+  */ 
+#define HAL_DMA_ERROR_NONE      ((uint32_t)0x00000000)    /*!< No error             */
+#define HAL_DMA_ERROR_TE        ((uint32_t)0x00000001)    /*!< Transfer error       */
+#define HAL_DMA_ERROR_FE        ((uint32_t)0x00000002)    /*!< FIFO error           */
+#define HAL_DMA_ERROR_DME       ((uint32_t)0x00000004)    /*!< Direct Mode error    */
+#define HAL_DMA_ERROR_TIMEOUT   ((uint32_t)0x00000020)    /*!< Timeout error        */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Channel_selection DMA Channel selection
+  * @brief    DMA channel selection 
+  * @{
+  */ 
+#define DMA_CHANNEL_0        ((uint32_t)0x00000000)  /*!< DMA Channel 0 */
+#define DMA_CHANNEL_1        ((uint32_t)0x02000000)  /*!< DMA Channel 1 */
+#define DMA_CHANNEL_2        ((uint32_t)0x04000000)  /*!< DMA Channel 2 */
+#define DMA_CHANNEL_3        ((uint32_t)0x06000000)  /*!< DMA Channel 3 */
+#define DMA_CHANNEL_4        ((uint32_t)0x08000000)  /*!< DMA Channel 4 */
+#define DMA_CHANNEL_5        ((uint32_t)0x0A000000)  /*!< DMA Channel 5 */
+#define DMA_CHANNEL_6        ((uint32_t)0x0C000000)  /*!< DMA Channel 6 */
+#define DMA_CHANNEL_7        ((uint32_t)0x0E000000)  /*!< DMA Channel 7 */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+  * @brief    DMA data transfer direction 
+  * @{
+  */ 
+#define DMA_PERIPH_TO_MEMORY         ((uint32_t)0x00000000)      /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH         ((uint32_t)DMA_SxCR_DIR_0)  /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY         ((uint32_t)DMA_SxCR_DIR_1)  /*!< Memory to memory direction     */
+/**
+  * @}
+  */
+        
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+  * @brief    DMA peripheral incremented mode 
+  * @{
+  */ 
+#define DMA_PINC_ENABLE        ((uint32_t)DMA_SxCR_PINC)  /*!< Peripheral increment mode enable  */
+#define DMA_PINC_DISABLE       ((uint32_t)0x00000000)     /*!< Peripheral increment mode disable */
+/**
+  * @}
+  */ 
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+  * @brief    DMA memory incremented mode 
+  * @{
+  */ 
+#define DMA_MINC_ENABLE         ((uint32_t)DMA_SxCR_MINC)  /*!< Memory increment mode enable  */
+#define DMA_MINC_DISABLE        ((uint32_t)0x00000000)     /*!< Memory increment mode disable */
+/**
+  * @}
+  */
+
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+  * @brief    DMA peripheral data size 
+  * @{
+  */ 
+#define DMA_PDATAALIGN_BYTE          ((uint32_t)0x00000000)        /*!< Peripheral data alignment: Byte     */
+#define DMA_PDATAALIGN_HALFWORD      ((uint32_t)DMA_SxCR_PSIZE_0)  /*!< Peripheral data alignment: HalfWord */
+#define DMA_PDATAALIGN_WORD          ((uint32_t)DMA_SxCR_PSIZE_1)  /*!< Peripheral data alignment: Word     */
+/**
+  * @}
+  */ 
+
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+  * @brief    DMA memory data size 
+  * @{ 
+  */
+#define DMA_MDATAALIGN_BYTE          ((uint32_t)0x00000000)        /*!< Memory data alignment: Byte     */
+#define DMA_MDATAALIGN_HALFWORD      ((uint32_t)DMA_SxCR_MSIZE_0)  /*!< Memory data alignment: HalfWord */
+#define DMA_MDATAALIGN_WORD          ((uint32_t)DMA_SxCR_MSIZE_1)  /*!< Memory data alignment: Word     */
+/**
+  * @}
+  */
+
+/** @defgroup DMA_mode DMA mode
+  * @brief    DMA mode 
+  * @{
+  */ 
+#define DMA_NORMAL         ((uint32_t)0x00000000)       /*!< Normal mode                  */
+#define DMA_CIRCULAR       ((uint32_t)DMA_SxCR_CIRC)    /*!< Circular mode                */
+#define DMA_PFCTRL         ((uint32_t)DMA_SxCR_PFCTRL)  /*!< Peripheral flow control mode */
+/**
+  * @}
+  */
+
+
+/** @defgroup DMA_Priority_level DMA Priority level
+  * @brief    DMA priority levels 
+  * @{
+  */
+#define DMA_PRIORITY_LOW             ((uint32_t)0x00000000)     /*!< Priority level: Low       */
+#define DMA_PRIORITY_MEDIUM          ((uint32_t)DMA_SxCR_PL_0)  /*!< Priority level: Medium    */
+#define DMA_PRIORITY_HIGH            ((uint32_t)DMA_SxCR_PL_1)  /*!< Priority level: High      */
+#define DMA_PRIORITY_VERY_HIGH       ((uint32_t)DMA_SxCR_PL)    /*!< Priority level: Very High */
+/**
+  * @}
+  */ 
+
+
+/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode
+  * @brief    DMA FIFO direct mode
+  * @{
+  */
+#define DMA_FIFOMODE_DISABLE        ((uint32_t)0x00000000)       /*!< FIFO mode disable */
+#define DMA_FIFOMODE_ENABLE         ((uint32_t)DMA_SxFCR_DMDIS)  /*!< FIFO mode enable  */
+/**
+  * @}
+  */ 
+
+/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level
+  * @brief    DMA FIFO level 
+  * @{
+  */
+#define DMA_FIFO_THRESHOLD_1QUARTERFULL       ((uint32_t)0x00000000)       /*!< FIFO threshold 1 quart full configuration  */
+#define DMA_FIFO_THRESHOLD_HALFFULL           ((uint32_t)DMA_SxFCR_FTH_0)  /*!< FIFO threshold half full configuration     */
+#define DMA_FIFO_THRESHOLD_3QUARTERSFULL      ((uint32_t)DMA_SxFCR_FTH_1)  /*!< FIFO threshold 3 quarts full configuration */
+#define DMA_FIFO_THRESHOLD_FULL               ((uint32_t)DMA_SxFCR_FTH)    /*!< FIFO threshold full configuration          */
+/**
+  * @}
+  */ 
+
+/** @defgroup DMA_Memory_burst DMA Memory burst
+  * @brief    DMA memory burst 
+  * @{
+  */ 
+#define DMA_MBURST_SINGLE       ((uint32_t)0x00000000)  
+#define DMA_MBURST_INC4         ((uint32_t)DMA_SxCR_MBURST_0)  
+#define DMA_MBURST_INC8         ((uint32_t)DMA_SxCR_MBURST_1)  
+#define DMA_MBURST_INC16        ((uint32_t)DMA_SxCR_MBURST)  
+/**
+  * @}
+  */ 
+
+
+/** @defgroup DMA_Peripheral_burst DMA Peripheral burst
+  * @brief    DMA peripheral burst 
+  * @{
+  */ 
+#define DMA_PBURST_SINGLE       ((uint32_t)0x00000000)  
+#define DMA_PBURST_INC4         ((uint32_t)DMA_SxCR_PBURST_0)  
+#define DMA_PBURST_INC8         ((uint32_t)DMA_SxCR_PBURST_1)  
+#define DMA_PBURST_INC16        ((uint32_t)DMA_SxCR_PBURST)  
+/**
+  * @}
+  */
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+  * @brief    DMA interrupts definition 
+  * @{
+  */
+#define DMA_IT_TC                         ((uint32_t)DMA_SxCR_TCIE)
+#define DMA_IT_HT                         ((uint32_t)DMA_SxCR_HTIE)
+#define DMA_IT_TE                         ((uint32_t)DMA_SxCR_TEIE)
+#define DMA_IT_DME                        ((uint32_t)DMA_SxCR_DMEIE)
+#define DMA_IT_FE                         ((uint32_t)0x00000080)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+  * @brief    DMA flag definitions 
+  * @{
+  */ 
+#define DMA_FLAG_FEIF0_4                    ((uint32_t)0x00800001)
+#define DMA_FLAG_DMEIF0_4                   ((uint32_t)0x00800004)
+#define DMA_FLAG_TEIF0_4                    ((uint32_t)0x00000008)
+#define DMA_FLAG_HTIF0_4                    ((uint32_t)0x00000010)
+#define DMA_FLAG_TCIF0_4                    ((uint32_t)0x00000020)
+#define DMA_FLAG_FEIF1_5                    ((uint32_t)0x00000040)
+#define DMA_FLAG_DMEIF1_5                   ((uint32_t)0x00000100)
+#define DMA_FLAG_TEIF1_5                    ((uint32_t)0x00000200)
+#define DMA_FLAG_HTIF1_5                    ((uint32_t)0x00000400)
+#define DMA_FLAG_TCIF1_5                    ((uint32_t)0x00000800)
+#define DMA_FLAG_FEIF2_6                    ((uint32_t)0x00010000)
+#define DMA_FLAG_DMEIF2_6                   ((uint32_t)0x00040000)
+#define DMA_FLAG_TEIF2_6                    ((uint32_t)0x00080000)
+#define DMA_FLAG_HTIF2_6                    ((uint32_t)0x00100000)
+#define DMA_FLAG_TCIF2_6                    ((uint32_t)0x00200000)
+#define DMA_FLAG_FEIF3_7                    ((uint32_t)0x00400000)
+#define DMA_FLAG_DMEIF3_7                   ((uint32_t)0x01000000)
+#define DMA_FLAG_TEIF3_7                    ((uint32_t)0x02000000)
+#define DMA_FLAG_HTIF3_7                    ((uint32_t)0x04000000)
+#define DMA_FLAG_TCIF3_7                    ((uint32_t)0x08000000)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+ 
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DMA handle state
+  * @param  __HANDLE__: specifies the DMA handle.
+  * @retval None
+  */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+  * @brief  Return the current DMA Stream FIFO filled level.
+  * @param  __HANDLE__: DMA handle
+  * @retval The FIFO filling state.
+  *           - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full 
+  *                                              and not empty.
+  *           - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
+  *           - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
+  *           - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
+  *           - DMA_FIFOStatus_Empty: when FIFO is empty
+  *           - DMA_FIFOStatus_Full: when FIFO is full
+  */
+#define __HAL_DMA_GET_FS(__HANDLE__)      (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
+
+/**
+  * @brief  Enable the specified DMA Stream.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_ENABLE(__HANDLE__)      ((__HANDLE__)->Instance->CR |=  DMA_SxCR_EN)
+
+/**
+  * @brief  Disable the specified DMA Stream.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_DMA_DISABLE(__HANDLE__)     ((__HANDLE__)->Instance->CR &=  ~DMA_SxCR_EN)
+
+/* Interrupt & Flag management */
+
+/**
+  * @brief  Return the current DMA Stream transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer complete flag index.
+  */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
+   DMA_FLAG_TCIF3_7)
+
+/**
+  * @brief  Return the current DMA Stream half transfer complete flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified half transfer complete flag index.
+  */      
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
+   DMA_FLAG_HTIF3_7)
+
+/**
+  * @brief  Return the current DMA Stream transfer error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified transfer error flag index.
+  */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
+   DMA_FLAG_TEIF3_7)
+
+/**
+  * @brief  Return the current DMA Stream FIFO error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified FIFO error flag index.
+  */
+#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
+   DMA_FLAG_FEIF3_7)
+
+/**
+  * @brief  Return the current DMA Stream direct mode error flag.
+  * @param  __HANDLE__: DMA handle
+  * @retval The specified direct mode error flag index.
+  */
+#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
+   DMA_FLAG_DMEIF3_7)
+
+/**
+  * @brief  Get the DMA Stream pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCIFx: Transfer complete flag.
+  *            @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+  *            @arg DMA_FLAG_TEIFx: Transfer error flag.
+  *            @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+  *            @arg DMA_FLAG_FEIFx: FIFO error flag.
+  *         Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.   
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
+
+/**
+  * @brief  Clear the DMA Stream pending flags.
+  * @param  __HANDLE__: DMA handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA_FLAG_TCIFx: Transfer complete flag.
+  *            @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+  *            @arg DMA_FLAG_TEIFx: Transfer error flag.
+  *            @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+  *            @arg DMA_FLAG_FEIFx: FIFO error flag.
+  *         Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.   
+  * @retval None
+  */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
+
+/**
+  * @brief  Enable the specified DMA Stream interrupts.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. 
+  *        This parameter can be any combination of the following values:
+  *           @arg DMA_IT_TC: Transfer complete interrupt mask.
+  *           @arg DMA_IT_HT: Half transfer complete interrupt mask.
+  *           @arg DMA_IT_TE: Transfer error interrupt mask.
+  *           @arg DMA_IT_FE: FIFO error interrupt mask.
+  *           @arg DMA_IT_DME: Direct mode error interrupt.
+  * @retval None
+  */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__)   (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
+
+/**
+  * @brief  Disable the specified DMA Stream interrupts.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. 
+  *         This parameter can be any combination of the following values:
+  *            @arg DMA_IT_TC: Transfer complete interrupt mask.
+  *            @arg DMA_IT_HT: Half transfer complete interrupt mask.
+  *            @arg DMA_IT_TE: Transfer error interrupt mask.
+  *            @arg DMA_IT_FE: FIFO error interrupt mask.
+  *            @arg DMA_IT_DME: Direct mode error interrupt.
+  * @retval None
+  */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__)  (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
+
+/**
+  * @brief  Check whether the specified DMA Stream interrupt is enabled or not.
+  * @param  __HANDLE__: DMA handle
+  * @param  __INTERRUPT__: specifies the DMA interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg DMA_IT_TC: Transfer complete interrupt mask.
+  *            @arg DMA_IT_HT: Half transfer complete interrupt mask.
+  *            @arg DMA_IT_TE: Transfer error interrupt mask.
+  *            @arg DMA_IT_FE: FIFO error interrupt mask.
+  *            @arg DMA_IT_DME: Direct mode error interrupt.
+  * @retval The state of DMA_IT.
+  */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)  (((__INTERRUPT__) != DMA_IT_FE)? \
+                                                        ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
+                                                        ((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
+
+/**
+  * @brief  Writes the number of data units to be transferred on the DMA Stream.
+  * @param  __HANDLE__: DMA handle
+  * @param  __COUNTER__: Number of data units to be transferred (from 0 to 65535) 
+  *          Number of data items depends only on the Peripheral data format.
+  *            
+  * @note   If Peripheral data format is Bytes: number of data units is equal 
+  *         to total number of bytes to be transferred.
+  *           
+  * @note   If Peripheral data format is Half-Word: number of data units is  
+  *         equal to total number of bytes to be transferred / 2.
+  *           
+  * @note   If Peripheral data format is Word: number of data units is equal 
+  *         to total  number of bytes to be transferred / 4.
+  *      
+  * @retval The number of remaining data units in the current DMAy Streamx transfer.
+  */
+#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
+
+/**
+  * @brief  Returns the number of remaining data units in the current DMAy Streamx transfer.
+  * @param  __HANDLE__: DMA handle
+  *   
+  * @retval The number of remaining data units in the current DMA Stream transfer.
+  */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
+
+
+/* Include DMA HAL Extension module */
+#include "stm32f7xx_hal_dma_ex.h"   
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Functions DMA Exported Functions
+  * @brief    DMA Exported functions 
+  * @{
+  */
+
+/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief   Initialization and de-initialization functions 
+  * @{
+  */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); 
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions
+  * @brief   I/O operation functions  
+  * @{
+  */
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void              HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */ 
+
+/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
+  * @brief    Peripheral State functions 
+  * @{
+  */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t             HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */ 
+/**
+  * @}
+  */ 
+/* Private Constants -------------------------------------------------------------*/
+/** @defgroup DMA_Private_Constants DMA Private Constants
+  * @brief    DMA private defines and constants 
+  * @{
+  */
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA_Private_Macros DMA Private Macros
+  * @brief    DMA private macros 
+  * @{
+  */
+#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
+                                 ((CHANNEL) == DMA_CHANNEL_1) || \
+                                 ((CHANNEL) == DMA_CHANNEL_2) || \
+                                 ((CHANNEL) == DMA_CHANNEL_3) || \
+                                 ((CHANNEL) == DMA_CHANNEL_4) || \
+                                 ((CHANNEL) == DMA_CHANNEL_5) || \
+                                 ((CHANNEL) == DMA_CHANNEL_6) || \
+                                 ((CHANNEL) == DMA_CHANNEL_7))
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+                                     ((DIRECTION) == DMA_MEMORY_TO_PERIPH)  || \
+                                     ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) 
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+                                            ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE)  || \
+                                        ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE)     || \
+                                           ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+                                           ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE)     || \
+                                       ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+                                       ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL )  || \
+                           ((MODE) == DMA_CIRCULAR) || \
+                           ((MODE) == DMA_PFCTRL)) 
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW )   || \
+                                   ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+                                   ((PRIORITY) == DMA_PRIORITY_HIGH)   || \
+                                   ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) 
+
+#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
+                                       ((STATE) == DMA_FIFOMODE_ENABLE))
+
+#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
+                                          ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL)      || \
+                                          ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
+                                          ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
+
+#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
+                                    ((BURST) == DMA_MBURST_INC4)   || \
+                                    ((BURST) == DMA_MBURST_INC8)   || \
+                                    ((BURST) == DMA_MBURST_INC16))
+
+#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
+                                        ((BURST) == DMA_PBURST_INC4)   || \
+                                        ((BURST) == DMA_PBURST_INC8)   || \
+                                        ((BURST) == DMA_PBURST_INC16))
+/**
+  * @}
+  */ 
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMA_Private_Functions DMA Private Functions
+  * @brief    DMA private  functions 
+  * @{
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dma2d.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1269 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dma2d.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   DMA2D HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the DMA2D peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State and Errors functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      (#) Program the required configuration through following parameters:   
+          the Transfer Mode, the output color mode and the output offset using 
+          HAL_DMA2D_Init() function.
+
+      (#) Program the required configuration through following parameters:   
+          the input color mode, the input color, input alpha value, alpha mode 
+          and the input offset using HAL_DMA2D_ConfigLayer() function for foreground
+          or/and background layer.
+          
+     *** Polling mode IO operation ***
+     =================================   
+    [..]        
+       (+) Configure the pdata, Destination and data length and Enable 
+           the transfer using HAL_DMA2D_Start() 
+       (+) Wait for end of transfer using HAL_DMA2D_PollForTransfer(), at this stage
+           user can specify the value of timeout according to his end application.
+               
+     *** Interrupt mode IO operation ***    
+     ===================================
+     [..] 
+       (#) Configure the pdata, Destination and data length and Enable 
+           the transfer using HAL_DMA2D_Start_IT() 
+       (#) Use HAL_DMA2D_IRQHandler() called under DMA2D_IRQHandler() Interrupt subroutine
+       (#) At the end of data transfer HAL_DMA2D_IRQHandler() function is executed and user can 
+           add his own function by customization of function pointer XferCpltCallback and 
+           XferErrorCallback (i.e a member of DMA2D handle structure). 
+
+         -@-   In Register-to-Memory transfer mode, the pdata parameter is the register
+               color, in Memory-to-memory or memory-to-memory with pixel format
+               conversion the pdata is the source address.
+
+         -@-   Configure the foreground source address, the background source address, 
+               the Destination and data length and Enable the transfer using 
+               HAL_DMA2D_BlendingStart() in polling mode and HAL_DMA2D_BlendingStart_IT()
+               in interrupt mode.
+               
+         -@-   HAL_DMA2D_BlendingStart() and HAL_DMA2D_BlendingStart_IT() functions
+               are used if the memory to memory with blending transfer mode is selected.
+                   
+      (#) Optionally, configure and enable the CLUT using HAL_DMA2D_ConfigCLUT()
+          HAL_DMA2D_EnableCLUT() functions.
+
+      (#) Optionally, configure and enable LineInterrupt using the following function:
+          HAL_DMA2D_ProgramLineEvent().
+   
+      (#) The transfer can be suspended, continued and aborted using the following
+          functions: HAL_DMA2D_Suspend(), HAL_DMA2D_Resume(), HAL_DMA2D_Abort().
+                     
+      (#) To control DMA2D state you can use the following function: HAL_DMA2D_GetState()                   
+
+     *** DMA2D HAL driver macros list ***
+     ============================================= 
+     [..]
+       Below the list of most used macros in DMA2D HAL driver :
+       
+      (+) __HAL_DMA2D_ENABLE: Enable the DMA2D peripheral.
+      (+) __HAL_DMA2D_DISABLE: Disable the DMA2D peripheral.
+      (+) __HAL_DMA2D_GET_FLAG: Get the DMA2D pending flags.
+      (+) __HAL_DMA2D_CLEAR_FLAG: Clear the DMA2D pending flags.
+      (+) __HAL_DMA2D_ENABLE_IT: Enable the specified DMA2D interrupts.
+      (+) __HAL_DMA2D_DISABLE_IT: Disable the specified DMA2D interrupts.
+      (+) __HAL_DMA2D_GET_IT_SOURCE: Check whether the specified DMA2D interrupt has occurred or not.
+     
+     [..] 
+      (@) You can refer to the DMA2D HAL driver header file for more useful macros
+                                  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+/** @addtogroup DMA2D
+  * @brief DMA2D HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup DMA2D_Private_Defines
+  * @{
+  */
+#define HAL_TIMEOUT_DMA2D_ABORT      ((uint32_t)1000)  /* 1s  */
+#define HAL_TIMEOUT_DMA2D_SUSPEND    ((uint32_t)1000)  /* 1s  */
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup DMA2D_Private_Functions_Prototypes
+  * @{
+  */
+static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA2D_Exported_Functions
+  * @{
+  */
+
+/** @defgroup DMA2D_Group1 Initialization and Configuration functions
+ *  @brief   Initialization and Configuration functions
+ *
+@verbatim   
+ ===============================================================================
+                ##### Initialization and Configuration functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the DMA2D
+      (+) De-initialize the DMA2D 
+
+@endverbatim
+  * @{
+  */
+    
+/**
+  * @brief  Initializes the DMA2D according to the specified
+  *         parameters in the DMA2D_InitTypeDef and create the associated handle.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d)
+{ 
+  uint32_t tmp = 0;
+
+  /* Check the DMA2D peripheral state */
+  if(hdma2d == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_ALL_INSTANCE(hdma2d->Instance));
+  assert_param(IS_DMA2D_MODE(hdma2d->Init.Mode));
+  assert_param(IS_DMA2D_CMODE(hdma2d->Init.ColorMode));
+  assert_param(IS_DMA2D_OFFSET(hdma2d->Init.OutputOffset));
+
+  if(hdma2d->State == HAL_DMA2D_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hdma2d->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_DMA2D_MspInit(hdma2d);
+  }
+  
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;  
+
+/* DMA2D CR register configuration -------------------------------------------*/
+  /* Get the CR register value */
+  tmp = hdma2d->Instance->CR;
+
+  /* Clear Mode bits */
+  tmp &= (uint32_t)~DMA2D_CR_MODE;
+
+  /* Prepare the value to be wrote to the CR register */
+  tmp |= hdma2d->Init.Mode;
+
+  /* Write to DMA2D CR register */
+  hdma2d->Instance->CR = tmp;
+
+/* DMA2D OPFCCR register configuration ---------------------------------------*/
+  /* Get the OPFCCR register value */
+  tmp = hdma2d->Instance->OPFCCR;
+
+  /* Clear Color Mode bits */
+  tmp &= (uint32_t)~DMA2D_OPFCCR_CM;
+
+  /* Prepare the value to be wrote to the OPFCCR register */
+  tmp |= hdma2d->Init.ColorMode;
+
+  /* Write to DMA2D OPFCCR register */
+  hdma2d->Instance->OPFCCR = tmp;
+
+/* DMA2D OOR register configuration ------------------------------------------*/  
+  /* Get the OOR register value */
+  tmp = hdma2d->Instance->OOR;
+
+  /* Clear Offset bits */
+  tmp &= (uint32_t)~DMA2D_OOR_LO;
+
+  /* Prepare the value to be wrote to the OOR register */
+  tmp |= hdma2d->Init.OutputOffset;
+
+  /* Write to DMA2D OOR register */
+  hdma2d->Instance->OOR = tmp;
+
+  /* Update error code */
+  hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE;
+
+  /* Initialize the DMA2D state*/
+  hdma2d->State  = HAL_DMA2D_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deinitializes the DMA2D peripheral registers to their default reset
+  *         values.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @retval None
+  */
+
+HAL_StatusTypeDef HAL_DMA2D_DeInit(DMA2D_HandleTypeDef *hdma2d)
+{
+  /* Check the DMA2D peripheral state */
+  if(hdma2d == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  /* DeInit the low level hardware */
+  HAL_DMA2D_MspDeInit(hdma2d);
+
+  /* Update error code */
+  hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE;
+
+  /* Initialize the DMA2D state*/
+  hdma2d->State  = HAL_DMA2D_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hdma2d);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DMA2D MSP.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @retval None
+  */
+__weak void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdma2d);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DMA2D_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  DeInitializes the DMA2D MSP.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @retval None
+  */
+__weak void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdma2d);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_DMA2D_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Group2 IO operation functions 
+ *  @brief   IO operation functions  
+ *
+@verbatim   
+ ===============================================================================
+                      #####  IO operation functions  #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Configure the pdata, destination address and data size and 
+          Start DMA2D transfer.
+      (+) Configure the source for foreground and background, destination address 
+          and data size and Start MultiBuffer DMA2D transfer.
+      (+) Configure the pdata, destination address and data size and 
+          Start DMA2D transfer with interrupt.
+      (+) Configure the source for foreground and background, destination address 
+          and data size and Start MultiBuffer DMA2D transfer with interrupt.
+      (+) Abort DMA2D transfer.
+      (+) Suspend DMA2D transfer.
+      (+) Continue DMA2D transfer. 
+      (+) Poll for transfer complete.
+      (+) handle DMA2D interrupt request.
+        
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Start the DMA2D Transfer.
+  * @param  hdma2d:     pointer to a DMA2D_HandleTypeDef structure that contains
+  *                     the configuration information for the DMA2D.  
+  * @param  pdata:      Configure the source memory Buffer address if 
+  *                     the memory to memory or memory to memory with pixel format 
+  *                     conversion DMA2D mode is selected, and configure 
+  *                     the color value if register to memory DMA2D mode is selected.
+  * @param  DstAddress: The destination memory Buffer address.
+  * @param  Width:      The width of data to be transferred from source to destination.
+  * @param  Height:      The height of data to be transferred from source to destination.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width,  uint32_t Height)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma2d);
+
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LINE(Height));
+  assert_param(IS_DMA2D_PIXEL(Width));
+
+  /* Disable the Peripheral */
+  __HAL_DMA2D_DISABLE(hdma2d);
+
+  /* Configure the source, destination address and the data size */
+  DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height);
+
+  /* Enable the Peripheral */
+  __HAL_DMA2D_ENABLE(hdma2d);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Start the DMA2D Transfer with interrupt enabled.
+  * @param  hdma2d:     pointer to a DMA2D_HandleTypeDef structure that contains
+  *                     the configuration information for the DMA2D.  
+  * @param  pdata:      Configure the source memory Buffer address if 
+  *                     the memory to memory or memory to memory with pixel format 
+  *                     conversion DMA2D mode is selected, and configure 
+  *                     the color value if register to memory DMA2D mode is selected.
+  * @param  DstAddress: The destination memory Buffer address.
+  * @param  Width:      The width of data to be transferred from source to destination.
+  * @param  Height:     The height of data to be transferred from source to destination.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width,  uint32_t Height)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma2d);
+
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LINE(Height));
+  assert_param(IS_DMA2D_PIXEL(Width));
+
+  /* Disable the Peripheral */
+  __HAL_DMA2D_DISABLE(hdma2d);
+
+  /* Configure the source, destination address and the data size */
+  DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height);
+
+  /* Enable the transfer complete interrupt */
+  __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC);
+
+  /* Enable the transfer Error interrupt */
+  __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TE);
+
+  /* Enable the Peripheral */
+  __HAL_DMA2D_ENABLE(hdma2d);
+
+  /* Enable the configuration error interrupt */
+  __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CE);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Start the multi-source DMA2D Transfer.
+  * @param  hdma2d:      pointer to a DMA2D_HandleTypeDef structure that contains
+  *                      the configuration information for the DMA2D.  
+  * @param  SrcAddress1: The source memory Buffer address of the foreground layer.
+  * @param  SrcAddress2: The source memory Buffer address of the background layer.
+  * @param  DstAddress:  The destination memory Buffer address
+  * @param  Width:       The width of data to be transferred from source to destination.
+  * @param  Height:      The height of data to be transferred from source to destination.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t  SrcAddress2, uint32_t DstAddress, uint32_t Width,  uint32_t Height)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma2d);
+
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY; 
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LINE(Height));
+  assert_param(IS_DMA2D_PIXEL(Width));
+
+  /* Disable the Peripheral */
+  __HAL_DMA2D_DISABLE(hdma2d);
+
+  /* Configure DMA2D Stream source2 address */
+  hdma2d->Instance->BGMAR = SrcAddress2;
+
+  /* Configure the source, destination address and the data size */
+  DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height);
+
+  /* Enable the Peripheral */
+  __HAL_DMA2D_ENABLE(hdma2d);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Start the multi-source DMA2D Transfer with interrupt enabled.
+  * @param  hdma2d:     pointer to a DMA2D_HandleTypeDef structure that contains
+  *                     the configuration information for the DMA2D.  
+  * @param  SrcAddress1: The source memory Buffer address of the foreground layer.
+  * @param  SrcAddress2: The source memory Buffer address of the background layer.
+  * @param  DstAddress:  The destination memory Buffer address.
+  * @param  Width:       The width of data to be transferred from source to destination.
+  * @param  Height:      The height of data to be transferred from source to destination.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t  SrcAddress2, uint32_t DstAddress, uint32_t Width,  uint32_t Height)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma2d);
+
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LINE(Height));
+  assert_param(IS_DMA2D_PIXEL(Width));
+
+  /* Disable the Peripheral */
+  __HAL_DMA2D_DISABLE(hdma2d);
+ 
+  /* Configure DMA2D Stream source2 address */
+  hdma2d->Instance->BGMAR = SrcAddress2;
+
+  /* Configure the source, destination address and the data size */
+  DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height);
+
+  /* Enable the configuration error interrupt */
+  __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CE);
+
+  /* Enable the transfer complete interrupt */
+  __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC);
+
+  /* Enable the transfer Error interrupt */
+  __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TE);
+
+  /* Enable the Peripheral */
+  __HAL_DMA2D_ENABLE(hdma2d);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Abort the DMA2D Transfer.
+  * @param  hdma2d : pointer to a DMA2D_HandleTypeDef structure that contains
+  *                  the configuration information for the DMA2D.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d)
+{
+  uint32_t tickstart = 0;
+
+  /* Disable the DMA2D */
+  __HAL_DMA2D_DISABLE(hdma2d);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check if the DMA2D is effectively disabled */
+  while((hdma2d->Instance->CR & DMA2D_CR_START) != 0)
+  {
+    if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA2D_ABORT)
+    {
+      /* Update error code */
+      hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+      
+      /* Change the DMA2D state */
+      hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma2d);
+      
+      return HAL_TIMEOUT;
+    }
+  }
+  /* Process Unlocked */
+  __HAL_UNLOCK(hdma2d);
+
+  /* Change the DMA2D state*/
+  hdma2d->State = HAL_DMA2D_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Suspend the DMA2D Transfer.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D. 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d)
+{
+  uint32_t tickstart = 0;
+
+  /* Suspend the DMA2D transfer */
+  hdma2d->Instance->CR |= DMA2D_CR_SUSP;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Check if the DMA2D is effectively suspended */
+  while((hdma2d->Instance->CR & DMA2D_CR_SUSP) != DMA2D_CR_SUSP)
+  {
+    if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA2D_SUSPEND)
+    {
+      /* Update error code */
+      hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+      
+      /* Change the DMA2D state */
+      hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
+      
+      return HAL_TIMEOUT;
+    }
+  }
+  /* Change the DMA2D state*/
+  hdma2d->State = HAL_DMA2D_STATE_SUSPEND;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Resume the DMA2D Transfer.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d)
+{
+  /* Resume the DMA2D transfer */
+  hdma2d->Instance->CR &= ~DMA2D_CR_SUSP;
+
+  /* Change the DMA2D state*/
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Polling for transfer complete or CLUT loading.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D. 
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout)
+{
+  uint32_t tmp, tmp1;
+  uint32_t tickstart = 0;
+
+  /* Polling for DMA2D transfer */
+  if((hdma2d->Instance->CR & DMA2D_CR_START) != 0)
+  {
+   /* Get tick */
+   tickstart = HAL_GetTick();
+
+    while(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) == RESET)
+    {
+      tmp  = __HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CE);
+      tmp1 = __HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TE);
+
+      if((tmp != RESET) || (tmp1 != RESET))
+      {
+        /* Clear the transfer and configuration error flags */
+        __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE);
+        __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TE);
+
+        /* Change DMA2D state */
+        hdma2d->State= HAL_DMA2D_STATE_ERROR;
+
+        /* Process unlocked */
+        __HAL_UNLOCK(hdma2d);
+        
+        return HAL_ERROR;
+      }
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Process unlocked */
+          __HAL_UNLOCK(hdma2d);
+        
+          /* Update error code */
+          hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+
+          /* Change the DMA2D state */
+          hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
+          
+          return HAL_TIMEOUT;
+        }
+      }        
+    }
+  }
+  /* Polling for CLUT loading */
+  if((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) != 0)
+  {
+    /* Get tick */
+    tickstart = HAL_GetTick();
+   
+    while(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CTC) == RESET)
+    {
+      if((__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CAE) != RESET))
+      {      
+        /* Clear the transfer and configuration error flags */
+        __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CAE);
+        
+        /* Change DMA2D state */
+        hdma2d->State= HAL_DMA2D_STATE_ERROR;
+        
+        return HAL_ERROR;      
+      }      
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Update error code */
+          hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
+    
+          /* Change the DMA2D state */
+          hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
+          
+          return HAL_TIMEOUT;
+        }
+      }      
+    }
+  }
+  /* Clear the transfer complete flag */
+  __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC);
+  
+  /* Clear the CLUT loading flag */
+  __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CTC);  
+  
+  /* Change DMA2D state */
+  hdma2d->State = HAL_DMA2D_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hdma2d);
+  
+  return HAL_OK;
+}
+/**
+  * @brief  Handles DMA2D interrupt request.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.  
+  * @retval HAL status
+  */
+void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d)
+{    
+  /* Transfer Error Interrupt management ***************************************/
+  if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TE) != RESET)
+  {
+    if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_TE) != RESET)
+    {
+      /* Disable the transfer Error interrupt */
+      __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TE);  
+
+      /* Update error code */
+      hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE;
+    
+      /* Clear the transfer error flag */
+      __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TE);
+
+      /* Change DMA2D state */
+      hdma2d->State = HAL_DMA2D_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma2d);       
+      
+      if(hdma2d->XferErrorCallback != NULL)
+      {
+        /* Transfer error Callback */
+        hdma2d->XferErrorCallback(hdma2d);
+      }
+    }
+  }
+  /* Configuration Error Interrupt management **********************************/
+  if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CE) != RESET)
+  {
+    if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_CE) != RESET)
+    {
+      /* Disable the Configuration Error interrupt */
+      __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CE);
+  
+      /* Clear the Configuration error flag */
+      __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE);
+
+      /* Update error code */
+      hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE;    
+    
+      /* Change DMA2D state */
+      hdma2d->State = HAL_DMA2D_STATE_ERROR;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma2d);       
+      
+      if(hdma2d->XferErrorCallback != NULL)
+      {
+        /* Transfer error Callback */
+        hdma2d->XferErrorCallback(hdma2d);
+      }
+    }
+  }
+  /* Transfer Complete Interrupt management ************************************/
+  if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) != RESET)
+  {
+    if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_TC) != RESET)
+    { 
+      /* Disable the transfer complete interrupt */
+      __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC);
+  
+      /* Clear the transfer complete flag */  
+      __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC);
+
+      /* Update error code */
+      hdma2d->ErrorCode |= HAL_DMA2D_ERROR_NONE;    
+    
+      /* Change DMA2D state */
+      hdma2d->State = HAL_DMA2D_STATE_READY;
+    
+      /* Process Unlocked */
+      __HAL_UNLOCK(hdma2d);       
+      
+      if(hdma2d->XferCpltCallback != NULL)
+      {
+        /* Transfer complete Callback */
+        hdma2d->XferCpltCallback(hdma2d);
+      }         
+    }
+  }
+} 
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Group3 Peripheral Control functions
+ *  @brief    Peripheral Control functions 
+ *
+@verbatim   
+ ===============================================================================
+                    ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Configure the DMA2D foreground or/and background parameters.
+      (+) Configure the DMA2D CLUT transfer.
+      (+) Enable DMA2D CLUT.
+      (+) Disable DMA2D CLUT.
+      (+) Configure the line watermark
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Configure the DMA2D Layer according to the specified
+  *         parameters in the DMA2D_InitTypeDef and create the associated handle.
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @param  LayerIdx: DMA2D Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0(background) / 1(foreground)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
+{ 
+  DMA2D_LayerCfgTypeDef *pLayerCfg = &hdma2d->LayerCfg[LayerIdx];
+  
+  uint32_t tmp = 0;
+  
+  /* Process locked */
+  __HAL_LOCK(hdma2d);
+  
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY; 
+  
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LAYER(LayerIdx));  
+  assert_param(IS_DMA2D_OFFSET(pLayerCfg->InputOffset));  
+  if(hdma2d->Init.Mode != DMA2D_R2M)
+  {  
+    assert_param(IS_DMA2D_INPUT_COLOR_MODE(pLayerCfg->InputColorMode));
+    if(hdma2d->Init.Mode != DMA2D_M2M)
+    {
+      assert_param(IS_DMA2D_ALPHA_MODE(pLayerCfg->AlphaMode));
+    }
+  }
+  
+  /* Configure the background DMA2D layer */
+  if(LayerIdx == 0)
+  {
+    /* DMA2D BGPFCR register configuration -----------------------------------*/
+    /* Get the BGPFCCR register value */
+    tmp = hdma2d->Instance->BGPFCCR;
+    
+    /* Clear Input color mode, alpha value and alpha mode bits */
+    tmp &= (uint32_t)~(DMA2D_BGPFCCR_CM | DMA2D_BGPFCCR_AM | DMA2D_BGPFCCR_ALPHA); 
+    
+    if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
+    {
+      /* Prepare the value to be wrote to the BGPFCCR register */
+      tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | ((pLayerCfg->InputAlpha) & 0xFF000000));
+    }
+    else
+    {
+      /* Prepare the value to be wrote to the BGPFCCR register */
+      tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | (pLayerCfg->InputAlpha << 24));
+    }
+    
+    /* Write to DMA2D BGPFCCR register */
+    hdma2d->Instance->BGPFCCR = tmp; 
+    
+    /* DMA2D BGOR register configuration -------------------------------------*/  
+    /* Get the BGOR register value */
+    tmp = hdma2d->Instance->BGOR;
+    
+    /* Clear colors bits */
+    tmp &= (uint32_t)~DMA2D_BGOR_LO; 
+    
+    /* Prepare the value to be wrote to the BGOR register */
+    tmp |= pLayerCfg->InputOffset;
+    
+    /* Write to DMA2D BGOR register */
+    hdma2d->Instance->BGOR = tmp;
+    
+    if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
+    {
+      /* Prepare the value to be wrote to the BGCOLR register */
+      tmp = ((pLayerCfg->InputAlpha) & 0x00FFFFFF);
+    
+      /* Write to DMA2D BGCOLR register */
+      hdma2d->Instance->BGCOLR = tmp;
+    }    
+  }
+  /* Configure the foreground DMA2D layer */
+  else
+  {
+    /* DMA2D FGPFCR register configuration -----------------------------------*/
+    /* Get the FGPFCCR register value */
+    tmp = hdma2d->Instance->FGPFCCR;
+    
+    /* Clear Input color mode, alpha value and alpha mode bits */
+    tmp &= (uint32_t)~(DMA2D_FGPFCCR_CM | DMA2D_FGPFCCR_AM | DMA2D_FGPFCCR_ALPHA); 
+    
+    if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
+    {
+      /* Prepare the value to be wrote to the FGPFCCR register */
+      tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | ((pLayerCfg->InputAlpha) & 0xFF000000));
+    }
+    else
+    {
+      /* Prepare the value to be wrote to the FGPFCCR register */
+      tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | (pLayerCfg->InputAlpha << 24));
+    }
+    
+    /* Write to DMA2D FGPFCCR register */
+    hdma2d->Instance->FGPFCCR = tmp; 
+    
+    /* DMA2D FGOR register configuration -------------------------------------*/  
+    /* Get the FGOR register value */
+    tmp = hdma2d->Instance->FGOR;
+    
+    /* Clear colors bits */
+    tmp &= (uint32_t)~DMA2D_FGOR_LO; 
+    
+    /* Prepare the value to be wrote to the FGOR register */
+    tmp |= pLayerCfg->InputOffset;
+    
+    /* Write to DMA2D FGOR register */
+    hdma2d->Instance->FGOR = tmp;
+   
+    if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
+    {
+      /* Prepare the value to be wrote to the FGCOLR register */
+      tmp = ((pLayerCfg->InputAlpha) & 0x00FFFFFF);
+    
+      /* Write to DMA2D FGCOLR register */
+      hdma2d->Instance->FGCOLR = tmp;
+    }   
+  }    
+  /* Initialize the DMA2D state*/
+  hdma2d->State  = HAL_DMA2D_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hdma2d);  
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the DMA2D CLUT Transfer.
+  * @param  hdma2d:   pointer to a DMA2D_HandleTypeDef structure that contains
+  *                   the configuration information for the DMA2D.
+  * @param  CLUTCfg:  pointer to a DMA2D_CLUTCfgTypeDef structure that contains
+  *                   the configuration information for the color look up table.
+  * @param  LayerIdx: DMA2D Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0(background) / 1(foreground)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx)
+{
+  uint32_t tmp = 0, tmp1 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LAYER(LayerIdx));   
+  assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode));
+  assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size));
+  
+  /* Configure the CLUT of the background DMA2D layer */
+  if(LayerIdx == 0)
+  {
+    /* Get the BGCMAR register value */
+    tmp = hdma2d->Instance->BGCMAR;
+
+    /* Clear CLUT address bits */
+    tmp &= (uint32_t)~DMA2D_BGCMAR_MA; 
+  
+    /* Prepare the value to be wrote to the BGCMAR register */
+    tmp |= (uint32_t)CLUTCfg.pCLUT;
+  
+    /* Write to DMA2D BGCMAR register */
+    hdma2d->Instance->BGCMAR = tmp;
+    
+    /* Get the BGPFCCR register value */
+    tmp = hdma2d->Instance->BGPFCCR;
+
+    /* Clear CLUT size and CLUT address bits */
+    tmp &= (uint32_t)~(DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM); 
+
+    /* Get the CLUT size */
+    tmp1 = CLUTCfg.Size << 16;
+    
+    /* Prepare the value to be wrote to the BGPFCCR register */
+    tmp |= (CLUTCfg.CLUTColorMode | tmp1);
+  
+    /* Write to DMA2D BGPFCCR register */
+    hdma2d->Instance->BGPFCCR = tmp;       
+  }
+  /* Configure the CLUT of the foreground DMA2D layer */
+  else
+  {
+    /* Get the FGCMAR register value */
+    tmp = hdma2d->Instance->FGCMAR;
+
+    /* Clear CLUT address bits */
+    tmp &= (uint32_t)~DMA2D_FGCMAR_MA; 
+  
+    /* Prepare the value to be wrote to the FGCMAR register */
+    tmp |= (uint32_t)CLUTCfg.pCLUT;
+  
+    /* Write to DMA2D FGCMAR register */
+    hdma2d->Instance->FGCMAR = tmp;
+    
+    /* Get the FGPFCCR register value */
+    tmp = hdma2d->Instance->FGPFCCR;
+
+    /* Clear CLUT size and CLUT address bits */
+    tmp &= (uint32_t)~(DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM); 
+
+    /* Get the CLUT size */
+    tmp1 = CLUTCfg.Size << 8;
+    
+    /* Prepare the value to be wrote to the FGPFCCR register */
+    tmp |= (CLUTCfg.CLUTColorMode | tmp1);
+  
+    /* Write to DMA2D FGPFCCR register */
+    hdma2d->Instance->FGPFCCR = tmp;    
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enable the DMA2D CLUT Transfer.
+  * @param  hdma2d:   pointer to a DMA2D_HandleTypeDef structure that contains
+  *                   the configuration information for the DMA2D.
+  * @param  LayerIdx: DMA2D Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0(background) / 1(foreground)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
+{  
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LAYER(LayerIdx));
+  
+  if(LayerIdx == 0)
+  {
+    /* Enable the CLUT loading for the background */
+    hdma2d->Instance->BGPFCCR |= DMA2D_BGPFCCR_START;
+  }
+  else
+  {
+    /* Enable the CLUT loading for the foreground */
+    hdma2d->Instance->FGPFCCR |= DMA2D_FGPFCCR_START;
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the DMA2D CLUT Transfer.
+  * @param  hdma2d:   pointer to a DMA2D_HandleTypeDef structure that contains
+  *                   the configuration information for the DMA2D.
+  * @param  LayerIdx: DMA2D Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0(background) / 1(foreground)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LAYER(LayerIdx));
+  
+  if(LayerIdx == 0)
+  {
+    /* Disable the CLUT loading for the background */
+    hdma2d->Instance->BGPFCCR &= ~DMA2D_BGPFCCR_START;
+  }
+  else
+  {
+    /* Disable the CLUT loading for the foreground */
+    hdma2d->Instance->FGPFCCR &= ~DMA2D_FGPFCCR_START;
+  } 
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Define the configuration of the line watermark .
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.
+  * @param  Line:   Line Watermark configuration.
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line)
+{
+  /* Process locked */
+  __HAL_LOCK(hdma2d);
+  
+  /* Change DMA2D peripheral state */
+  hdma2d->State = HAL_DMA2D_STATE_BUSY;
+  
+  /* Check the parameters */
+  assert_param(IS_DMA2D_LineWatermark(Line));
+
+  /* Sets the Line watermark configuration */
+  DMA2D->LWR = (uint32_t)Line;
+  
+  /* Initialize the DMA2D state*/
+  hdma2d->State = HAL_DMA2D_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hdma2d);  
+  
+  return HAL_OK;  
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Group4 Peripheral State functions
+ *  @brief    Peripheral State functions 
+ *
+@verbatim   
+ ===============================================================================
+                  ##### Peripheral State and Errors functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides functions allowing to :
+      (+) Check the DMA2D state
+      (+) Get error code  
+
+@endverbatim
+  * @{
+  */ 
+
+/**
+  * @brief  Return the DMA2D state
+  * @param  hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
+  *                 the configuration information for the DMA2D.  
+  * @retval HAL state
+  */
+HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d)
+{  
+  return hdma2d->State;
+}
+
+/**
+  * @brief  Return the DMA2D error code
+  * @param  hdma2d : pointer to a DMA2D_HandleTypeDef structure that contains
+  *               the configuration information for DMA2D.
+  * @retval DMA2D Error Code
+  */
+uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d)
+{
+  return hdma2d->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @brief  Set the DMA2D Transfer parameter.
+  * @param  hdma2d:     pointer to a DMA2D_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA2D.  
+  * @param  pdata:      The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  Width:      The width of data to be transferred from source to destination.
+  * @param  Height:     The height of data to be transferred from source to destination.
+  * @retval HAL status
+  */
+static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height)
+{  
+  uint32_t tmp = 0;
+  uint32_t tmp1 = 0;
+  uint32_t tmp2 = 0;
+  uint32_t tmp3 = 0;
+  uint32_t tmp4 = 0;
+  
+  tmp = Width << 16;
+  
+  /* Configure DMA2D data size */
+  hdma2d->Instance->NLR = (Height | tmp);
+  
+  /* Configure DMA2D destination address */
+  hdma2d->Instance->OMAR = DstAddress;
+ 
+  /* Register to memory DMA2D mode selected */
+  if (hdma2d->Init.Mode == DMA2D_R2M)
+  {    
+    tmp1 = pdata & DMA2D_OCOLR_ALPHA_1;
+    tmp2 = pdata & DMA2D_OCOLR_RED_1;
+    tmp3 = pdata & DMA2D_OCOLR_GREEN_1;
+    tmp4 = pdata & DMA2D_OCOLR_BLUE_1;
+    
+    /* Prepare the value to be wrote to the OCOLR register according to the color mode */
+    if (hdma2d->Init.ColorMode == DMA2D_ARGB8888)
+    {
+      tmp = (tmp3 | tmp2 | tmp1| tmp4);
+    }
+    else if (hdma2d->Init.ColorMode == DMA2D_RGB888)
+    {
+      tmp = (tmp3 | tmp2 | tmp4);  
+    }
+    else if (hdma2d->Init.ColorMode == DMA2D_RGB565)
+    {
+      tmp2 = (tmp2 >> 19);
+      tmp3 = (tmp3 >> 10);
+      tmp4 = (tmp4 >> 3 );
+      tmp  = ((tmp3 << 5) | (tmp2 << 11) | tmp4); 
+    }
+    else if (hdma2d->Init.ColorMode == DMA2D_ARGB1555)
+    { 
+      tmp1 = (tmp1 >> 31);
+      tmp2 = (tmp2 >> 19);
+      tmp3 = (tmp3 >> 11);
+      tmp4 = (tmp4 >> 3 );      
+      tmp  = ((tmp3 << 5) | (tmp2 << 10) | (tmp1 << 15) | tmp4);    
+    } 
+    else /* DMA2D_CMode = DMA2D_ARGB4444 */
+    {
+      tmp1 = (tmp1 >> 28);
+      tmp2 = (tmp2 >> 20);
+      tmp3 = (tmp3 >> 12);
+      tmp4 = (tmp4 >> 4 );
+      tmp  = ((tmp3 << 4) | (tmp2 << 8) | (tmp1 << 12) | tmp4);
+    }    
+    /* Write to DMA2D OCOLR register */
+    hdma2d->Instance->OCOLR = tmp;
+  } 
+  else /* M2M, M2M_PFC or M2M_Blending DMA2D Mode */
+  {
+    /* Configure DMA2D source address */
+    hdma2d->Instance->FGMAR = pdata;
+  }
+}
+
+/**
+  * @}
+  */
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dma2d.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,559 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dma2d.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of DMA2D HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DMA2D_H
+#define __STM32F7xx_HAL_DMA2D_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DMA2D DMA2D
+  * @brief DMA2D HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Types DMA2D Exported Types
+  * @{
+  */
+#define MAX_DMA2D_LAYER  2
+
+/** 
+  * @brief DMA2D color Structure definition
+  */
+typedef struct
+{
+  uint32_t Blue;               /*!< Configures the blue value.
+                                    This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint32_t Green;              /*!< Configures the green value.
+                                    This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint32_t Red;                /*!< Configures the red value.
+                                    This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+} DMA2D_ColorTypeDef;
+
+/** 
+  * @brief DMA2D CLUT Structure definition
+  */
+typedef struct
+{
+  uint32_t *pCLUT;                  /*!< Configures the DMA2D CLUT memory address.*/
+
+  uint32_t CLUTColorMode;           /*!< configures the DMA2D CLUT color mode.
+                                         This parameter can be one value of @ref DMA2D_CLUT_CM */
+
+  uint32_t Size;                    /*!< configures the DMA2D CLUT size. 
+                                         This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+} DMA2D_CLUTCfgTypeDef;
+
+/** 
+  * @brief DMA2D Init structure definition
+  */
+typedef struct
+{
+  uint32_t             Mode;               /*!< configures the DMA2D transfer mode.
+                                                This parameter can be one value of @ref DMA2D_Mode */
+
+  uint32_t             ColorMode;          /*!< configures the color format of the output image.
+                                                This parameter can be one value of @ref DMA2D_Color_Mode */
+
+  uint32_t             OutputOffset;       /*!< Specifies the Offset value. 
+                                                This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */ 
+} DMA2D_InitTypeDef;
+
+/** 
+  * @brief DMA2D Layer structure definition
+  */
+typedef struct
+{
+  uint32_t             InputOffset;       /*!< configures the DMA2D foreground offset.
+                                               This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+
+  uint32_t             InputColorMode;    /*!< configures the DMA2D foreground color mode . 
+                                               This parameter can be one value of @ref DMA2D_Input_Color_Mode */
+
+  uint32_t             AlphaMode;         /*!< configures the DMA2D foreground alpha mode. 
+                                               This parameter can be one value of @ref DMA2D_ALPHA_MODE */
+
+  uint32_t             InputAlpha;        /*!< Specifies the DMA2D foreground alpha value and color value in case of A8 or A4 color mode. 
+                                               This parameter must be a number between Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF 
+                                               in case of A8 or A4 color mode (ARGB). 
+                                               Otherwise, This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+
+} DMA2D_LayerCfgTypeDef;
+
+/** 
+  * @brief  HAL DMA2D State structures definition
+  */
+typedef enum
+{
+  HAL_DMA2D_STATE_RESET             = 0x00,    /*!< DMA2D not yet initialized or disabled       */
+  HAL_DMA2D_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use    */
+  HAL_DMA2D_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing              */
+  HAL_DMA2D_STATE_TIMEOUT           = 0x03,    /*!< Timeout state                               */
+  HAL_DMA2D_STATE_ERROR             = 0x04,    /*!< DMA2D state error                           */
+  HAL_DMA2D_STATE_SUSPEND           = 0x05     /*!< DMA2D process is suspended                  */
+}HAL_DMA2D_StateTypeDef;
+
+/** 
+  * @brief  DMA2D handle Structure definition
+  */
+typedef struct __DMA2D_HandleTypeDef
+{
+  DMA2D_TypeDef               *Instance;                                                    /*!< DMA2D Register base address       */
+
+  DMA2D_InitTypeDef           Init;                                                         /*!< DMA2D communication parameters    */ 
+
+  void                        (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d);  /*!< DMA2D transfer complete callback  */
+
+  void                        (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback     */
+
+  DMA2D_LayerCfgTypeDef       LayerCfg[MAX_DMA2D_LAYER];                                    /*!< DMA2D Layers parameters           */  
+
+  HAL_LockTypeDef             Lock;                                                         /*!< DMA2D Lock                        */  
+
+  __IO HAL_DMA2D_StateTypeDef State;                                                        /*!< DMA2D transfer state              */
+
+  __IO uint32_t               ErrorCode;                                                    /*!< DMA2D Error code                  */  
+} DMA2D_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants
+  * @{
+  */
+
+/** @defgroup DMA2D_Error_Code DMA2D Error Code
+  * @{
+  */
+#define HAL_DMA2D_ERROR_NONE      ((uint32_t)0x00000000)    /*!< No error             */
+#define HAL_DMA2D_ERROR_TE        ((uint32_t)0x00000001)    /*!< Transfer error       */
+#define HAL_DMA2D_ERROR_CE        ((uint32_t)0x00000002)    /*!< Configuration error  */
+#define HAL_DMA2D_ERROR_TIMEOUT   ((uint32_t)0x00000020)    /*!< Timeout error        */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Mode DMA2D Mode 
+  * @{
+  */
+#define DMA2D_M2M                            ((uint32_t)0x00000000)             /*!< DMA2D memory to memory transfer mode */
+#define DMA2D_M2M_PFC                        ((uint32_t)0x00010000)             /*!< DMA2D memory to memory with pixel format conversion transfer mode */
+#define DMA2D_M2M_BLEND                      ((uint32_t)0x00020000)             /*!< DMA2D memory to memory with blending transfer mode */
+#define DMA2D_R2M                            ((uint32_t)0x00030000)             /*!< DMA2D register to memory transfer mode */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Color_Mode DMA2D Color Mode 
+  * @{
+  */
+#define DMA2D_ARGB8888                       ((uint32_t)0x00000000)             /*!< ARGB8888 DMA2D color mode */
+#define DMA2D_RGB888                         ((uint32_t)0x00000001)             /*!< RGB888 DMA2D color mode   */
+#define DMA2D_RGB565                         ((uint32_t)0x00000002)             /*!< RGB565 DMA2D color mode   */
+#define DMA2D_ARGB1555                       ((uint32_t)0x00000003)             /*!< ARGB1555 DMA2D color mode */
+#define DMA2D_ARGB4444                       ((uint32_t)0x00000004)             /*!< ARGB4444 DMA2D color mode */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_COLOR_VALUE DMA2D COLOR VALUE
+  * @{
+  */
+#define COLOR_VALUE             ((uint32_t)0x000000FF)                          /*!< color value mask */
+/**
+  * @}
+  */    
+
+/** @defgroup DMA2D_SIZE DMA2D SIZE 
+  * @{
+  */
+#define DMA2D_PIXEL          (DMA2D_NLR_PL >> 16)                               /*!< DMA2D pixel per line */
+#define DMA2D_LINE           DMA2D_NLR_NL                                       /*!< DMA2D number of line */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Offset DMA2D Offset 
+  * @{
+  */
+#define DMA2D_OFFSET      DMA2D_FGOR_LO            /*!< Line Offset */
+/**
+  * @}
+  */ 
+
+/** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode
+  * @{
+  */
+#define CM_ARGB8888        ((uint32_t)0x00000000)                               /*!< ARGB8888 color mode */
+#define CM_RGB888          ((uint32_t)0x00000001)                               /*!< RGB888 color mode */
+#define CM_RGB565          ((uint32_t)0x00000002)                               /*!< RGB565 color mode */
+#define CM_ARGB1555        ((uint32_t)0x00000003)                               /*!< ARGB1555 color mode */
+#define CM_ARGB4444        ((uint32_t)0x00000004)                               /*!< ARGB4444 color mode */
+#define CM_L8              ((uint32_t)0x00000005)                               /*!< L8 color mode */
+#define CM_AL44            ((uint32_t)0x00000006)                               /*!< AL44 color mode */
+#define CM_AL88            ((uint32_t)0x00000007)                               /*!< AL88 color mode */
+#define CM_L4              ((uint32_t)0x00000008)                               /*!< L4 color mode */
+#define CM_A8              ((uint32_t)0x00000009)                               /*!< A8 color mode */
+#define CM_A4              ((uint32_t)0x0000000A)                               /*!< A4 color mode */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_ALPHA_MODE DMA2D ALPHA MODE
+  * @{
+  */
+#define DMA2D_NO_MODIF_ALPHA       ((uint32_t)0x00000000)  /*!< No modification of the alpha channel value */
+#define DMA2D_REPLACE_ALPHA        ((uint32_t)0x00000001)  /*!< Replace original alpha channel value by programmed alpha value */
+#define DMA2D_COMBINE_ALPHA        ((uint32_t)0x00000002)  /*!< Replace original alpha channel value by programmed alpha value
+                                                                with original alpha channel value                              */
+/**
+  * @}
+  */    
+
+/** @defgroup DMA2D_CLUT_CM DMA2D CLUT CM
+  * @{
+  */
+#define DMA2D_CCM_ARGB8888    ((uint32_t)0x00000000)    /*!< ARGB8888 DMA2D C-LUT color mode */
+#define DMA2D_CCM_RGB888      ((uint32_t)0x00000001)    /*!< RGB888 DMA2D C-LUT color mode   */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Size_Clut DMA2D Size Clut
+  * @{
+  */
+#define DMA2D_CLUT_SIZE    (DMA2D_FGPFCCR_CS >> 8)    /*!< DMA2D C-LUT size */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_DeadTime DMA2D DeadTime 
+  * @{
+  */
+#define LINE_WATERMARK            DMA2D_LWR_LW
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Interrupts DMA2D Interrupts 
+  * @{
+  */
+#define DMA2D_IT_CE             DMA2D_CR_CEIE    /*!< Configuration Error Interrupt */
+#define DMA2D_IT_CTC            DMA2D_CR_CTCIE   /*!< C-LUT Transfer Complete Interrupt */
+#define DMA2D_IT_CAE            DMA2D_CR_CAEIE   /*!< C-LUT Access Error Interrupt */
+#define DMA2D_IT_TW             DMA2D_CR_TWIE    /*!< Transfer Watermark Interrupt */
+#define DMA2D_IT_TC             DMA2D_CR_TCIE    /*!< Transfer Complete Interrupt */
+#define DMA2D_IT_TE             DMA2D_CR_TEIE    /*!< Transfer Error Interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Flag DMA2D Flag 
+  * @{
+  */
+#define DMA2D_FLAG_CE          DMA2D_ISR_CEIF     /*!< Configuration Error Interrupt Flag */
+#define DMA2D_FLAG_CTC         DMA2D_ISR_CTCIF    /*!< C-LUT Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_CAE         DMA2D_ISR_CAEIF    /*!< C-LUT Access Error Interrupt Flag */
+#define DMA2D_FLAG_TW          DMA2D_ISR_TWIF     /*!< Transfer Watermark Interrupt Flag */
+#define DMA2D_FLAG_TC          DMA2D_ISR_TCIF     /*!< Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_TE          DMA2D_ISR_TEIF     /*!< Transfer Error Interrupt Flag */
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros
+  * @{
+  */
+
+/** @brief Reset DMA2D handle state
+  * @param  __HANDLE__: specifies the DMA2D handle.
+  * @retval None
+  */
+#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)
+
+/**
+  * @brief  Enable the DMA2D.
+  * @param  __HANDLE__: DMA2D handle
+  * @retval None.
+  */
+#define __HAL_DMA2D_ENABLE(__HANDLE__)        ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
+
+/**
+  * @brief  Disable the DMA2D.
+  * @param  __HANDLE__: DMA2D handle
+  * @retval None.
+  */
+#define __HAL_DMA2D_DISABLE(__HANDLE__)        ((__HANDLE__)->Instance->CR &= ~DMA2D_CR_START)
+
+/* Interrupt & Flag management */
+/**
+  * @brief  Get the DMA2D pending flags.
+  * @param  __HANDLE__: DMA2D handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_FLAG_CE:  Configuration error flag
+  *            @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
+  *            @arg DMA2D_FLAG_CAE: C-LUT access error flag
+  *            @arg DMA2D_FLAG_TW:  Transfer Watermark flag
+  *            @arg DMA2D_FLAG_TC:  Transfer complete flag
+  *            @arg DMA2D_FLAG_TE:  Transfer error flag   
+  * @retval The state of FLAG.
+  */
+#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+  * @brief  Clears the DMA2D pending flags.
+  * @param  __HANDLE__: DMA2D handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_FLAG_CE:  Configuration error flag
+  *            @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
+  *            @arg DMA2D_FLAG_CAE: C-LUT access error flag
+  *            @arg DMA2D_FLAG_TW:  Transfer Watermark flag
+  *            @arg DMA2D_FLAG_TC:  Transfer complete flag
+  *            @arg DMA2D_FLAG_TE:  Transfer error flag    
+  * @retval None
+  */
+#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))
+
+/**
+  * @brief  Enables the specified DMA2D interrupts.
+  * @param  __HANDLE__: DMA2D handle
+  * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be enabled. 
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_IT_CE:  Configuration error interrupt mask
+  *            @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+  *            @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+  *            @arg DMA2D_IT_TW:  Transfer Watermark interrupt mask
+  *            @arg DMA2D_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified DMA2D interrupts.
+  * @param  __HANDLE__: DMA2D handle
+  * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be disabled. 
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_IT_CE:  Configuration error interrupt mask
+  *            @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+  *            @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+  *            @arg DMA2D_IT_TW:  Transfer Watermark interrupt mask
+  *            @arg DMA2D_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified DMA2D interrupt has occurred or not.
+  * @param  __HANDLE__: DMA2D handle
+  * @param  __INTERRUPT__: specifies the DMA2D interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg DMA2D_IT_CE:  Configuration error interrupt mask
+  *            @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+  *            @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+  *            @arg DMA2D_IT_TW:  Transfer Watermark interrupt mask
+  *            @arg DMA2D_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
+  * @retval The state of INTERRUPT.
+  */
+#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/  
+/** @defgroup DMA2D_Exported_Functions DMA2D Exported Functions
+  * @{
+  */
+/* Initialization and de-initialization functions *******************************/
+HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d); 
+HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);
+void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
+void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width,  uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
+void              HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef  HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef  HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef  HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef  HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef  HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
+
+/* Peripheral State functions ***************************************************/
+HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
+uint32_t               HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Types DMA2D Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private defines -------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Defines DMA2D Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Variables DMA2D Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Constants DMA2D Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Macros DMA2D Private Macros
+  * @{
+  */
+#define IS_DMA2D_LAYER(LAYER)                 ((LAYER) <= MAX_DMA2D_LAYER)
+#define IS_DMA2D_MODE(MODE)                   (((MODE) == DMA2D_M2M)       || ((MODE) == DMA2D_M2M_PFC) || \
+                                               ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
+#define IS_DMA2D_CMODE(MODE_ARGB)             (((MODE_ARGB) == DMA2D_ARGB8888) || ((MODE_ARGB) == DMA2D_RGB888)   || \
+                                               ((MODE_ARGB) == DMA2D_RGB565)   || ((MODE_ARGB) == DMA2D_ARGB1555) || \
+                                               ((MODE_ARGB) == DMA2D_ARGB4444))
+#define IS_DMA2D_COLOR(COLOR)                 ((COLOR) <= COLOR_VALUE)
+#define IS_DMA2D_LINE(LINE)                   ((LINE) <= DMA2D_LINE)
+#define IS_DMA2D_PIXEL(PIXEL)                 ((PIXEL) <= DMA2D_PIXEL)
+#define IS_DMA2D_OFFSET(OOFFSET)              ((OOFFSET) <= DMA2D_OFFSET)
+#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM)   (((INPUT_CM) == CM_ARGB8888) || ((INPUT_CM) == CM_RGB888)   || \
+                                               ((INPUT_CM) == CM_RGB565)   || ((INPUT_CM) == CM_ARGB1555) || \
+                                               ((INPUT_CM) == CM_ARGB4444) || ((INPUT_CM) == CM_L8)       || \
+                                               ((INPUT_CM) == CM_AL44)     || ((INPUT_CM) == CM_AL88)     || \
+                                               ((INPUT_CM) == CM_L4)       || ((INPUT_CM) == CM_A8)       || \
+                                               ((INPUT_CM) == CM_A4))
+#define IS_DMA2D_ALPHA_MODE(AlphaMode)        (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
+                                               ((AlphaMode) == DMA2D_REPLACE_ALPHA)  || \
+                                               ((AlphaMode) == DMA2D_COMBINE_ALPHA))
+#define IS_DMA2D_CLUT_CM(CLUT_CM)             (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
+#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE)         ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
+#define IS_DMA2D_LineWatermark(LineWatermark) ((LineWatermark) <= LINE_WATERMARK)
+#define IS_DMA2D_IT(IT)                       (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
+                                               ((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
+                                               ((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
+#define IS_DMA2D_GET_FLAG(FLAG)               (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
+                                               ((FLAG) == DMA2D_FLAG_TW)   || ((FLAG) == DMA2D_FLAG_TC)  || \
+                                               ((FLAG) == DMA2D_FLAG_TE)   || ((FLAG) == DMA2D_FLAG_CE))
+/**
+  * @}
+  */
+
+/* Private functions prototypes ---------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Functions_Prototypes DMA2D Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Functions DMA2D Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_DMA2D_H */
+ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dma_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,301 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dma_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   DMA Extension HAL module driver
+  *         This file provides firmware functions to manage the following 
+  *         functionalities of the DMA Extension peripheral:
+  *           + Extended features functions
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+  The DMA Extension HAL driver can be used as follows:
+   (+) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
+       for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
+                   
+     -@-  In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
+     -@-  When Multi (Double) Buffer mode is enabled the, transfer is circular by default.
+     -@-  In Multi (Double) buffer mode, it is possible to update the base address for 
+          the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled. 
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup DMAEx DMAEx
+  * @brief DMA Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private Constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DMAEx_Private_Functions
+  * @{
+  */
+
+static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+
+/**
+  * @brief  Set the DMA Transfer parameter.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.  
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
+{  
+  /* Configure DMA Stream data length */
+  hdma->Instance->NDTR = DataLength;
+  
+  /* Peripheral to Memory */
+  if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
+  {   
+    /* Configure DMA Stream destination address */
+    hdma->Instance->PAR = DstAddress;
+    
+    /* Configure DMA Stream source address */
+    hdma->Instance->M0AR = SrcAddress;
+  }
+  /* Memory to Peripheral */
+  else
+  {
+    /* Configure DMA Stream source address */
+    hdma->Instance->PAR = SrcAddress;
+    
+    /* Configure DMA Stream destination address */
+    hdma->Instance->M0AR = DstAddress;
+  }
+}
+
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @addtogroup DMAEx_Exported_Functions
+  * @{
+  */
+
+
+/** @addtogroup DMAEx_Exported_Functions_Group1
+  *
+@verbatim   
+ ===============================================================================
+                #####  Extended features functions  #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Configure the source, destination address and data length and 
+          Start MultiBuffer DMA transfer
+      (+) Configure the source, destination address and data length and 
+          Start MultiBuffer DMA transfer with interrupt
+      (+) Change on the fly the memory0 or memory1 address.
+      
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Starts the multi_buffer DMA Transfer.
+  * @param  hdma      : pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.  
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer  
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
+{
+  /* Process Locked */
+  __HAL_LOCK(hdma);
+
+  /* Current memory buffer used is Memory 0 */
+  if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
+  {
+    hdma->State = HAL_DMA_STATE_BUSY_MEM0;
+  }
+  /* Current memory buffer used is Memory 1 */
+  else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
+  {
+    hdma->State = HAL_DMA_STATE_BUSY_MEM1;
+  }
+
+   /* Check the parameters */
+  assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+  /* Disable the peripheral */
+  __HAL_DMA_DISABLE(hdma);  
+
+  /* Enable the double buffer mode */
+  hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
+
+  /* Configure DMA Stream destination address */
+  hdma->Instance->M1AR = SecondMemAddress;
+
+  /* Configure the source, destination address and the data length */
+  DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
+
+  /* Enable the peripheral */
+  __HAL_DMA_ENABLE(hdma);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the multi_buffer DMA Transfer with interrupt enabled.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.  
+  * @param  SrcAddress: The source memory Buffer address
+  * @param  DstAddress: The destination memory Buffer address
+  * @param  SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer  
+  * @param  DataLength: The length of data to be transferred from source to destination
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
+{
+  /* Process Locked */
+  __HAL_LOCK(hdma);
+
+  /* Current memory buffer used is Memory 0 */
+  if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
+  {
+    hdma->State = HAL_DMA_STATE_BUSY_MEM0;
+  }
+  /* Current memory buffer used is Memory 1 */
+  else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
+  {
+    hdma->State = HAL_DMA_STATE_BUSY_MEM1;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_DMA_BUFFER_SIZE(DataLength));
+
+  /* Disable the peripheral */
+  __HAL_DMA_DISABLE(hdma);  
+
+  /* Enable the Double buffer mode */
+  hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
+
+  /* Configure DMA Stream destination address */
+  hdma->Instance->M1AR = SecondMemAddress;
+
+  /* Configure the source, destination address and the data length */
+  DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength); 
+
+  /* Enable the transfer complete interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TC);
+
+  /* Enable the Half transfer interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_HT);
+
+  /* Enable the transfer Error interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TE);
+
+  /* Enable the fifo Error interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_FE);  
+
+  /* Enable the direct mode Error interrupt */
+  __HAL_DMA_ENABLE_IT(hdma, DMA_IT_DME); 
+
+  /* Enable the peripheral */
+  __HAL_DMA_ENABLE(hdma); 
+
+  return HAL_OK; 
+}
+
+/**
+  * @brief  Change the memory0 or memory1 address on the fly.
+  * @param  hdma:       pointer to a DMA_HandleTypeDef structure that contains
+  *                     the configuration information for the specified DMA Stream.  
+  * @param  Address:    The new address
+  * @param  memory:     the memory to be changed, This parameter can be one of 
+  *                     the following values:
+  *                      MEMORY0 /
+  *                      MEMORY1
+  * @note   The MEMORY0 address can be changed only when the current transfer use
+  *         MEMORY1 and the MEMORY1 address can be changed only when the current 
+  *         transfer use MEMORY0.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
+{
+  if(memory == MEMORY0)
+  {
+    /* change the memory0 address */
+    hdma->Instance->M0AR = Address;
+  }
+  else
+  {
+    /* change the memory1 address */
+    hdma->Instance->M1AR = Address;
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_DMA_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_dma_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,123 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_dma_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of DMA HAL extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_DMA_EX_H
+#define __STM32F7xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DMAEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
+  * @brief DMAEx Exported types
+  * @{
+  */
+   
+/** 
+  * @brief  HAL DMA Memory definition  
+  */ 
+typedef enum
+{
+  MEMORY0      = 0x00,    /*!< Memory 0     */
+  MEMORY1      = 0x01,    /*!< Memory 1     */
+
+}HAL_DMA_MemoryTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
+  * @brief   DMAEx Exported functions
+  * @{
+  */
+
+/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
+  * @brief   Extended features functions
+  * @{
+  */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
+
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+         
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
+  * @brief DMAEx Private functions
+  * @{
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_eth.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,2043 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_eth.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   ETH HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Ethernet (ETH) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State and Errors functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      (#)Declare a ETH_HandleTypeDef handle structure, for example:
+         ETH_HandleTypeDef  heth;
+        
+      (#)Fill parameters of Init structure in heth handle
+  
+      (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...) 
+
+      (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API:
+          (##) Enable the Ethernet interface clock using 
+               (+++) __HAL_RCC_ETHMAC_CLK_ENABLE();
+               (+++) __HAL_RCC_ETHMACTX_CLK_ENABLE();
+               (+++) __HAL_RCC_ETHMACRX_CLK_ENABLE();
+           
+          (##) Initialize the related GPIO clocks
+          (##) Configure Ethernet pin-out
+          (##) Configure Ethernet NVIC interrupt (IT mode)   
+    
+      (#)Initialize Ethernet DMA Descriptors in chain mode and point to allocated buffers:
+          (##) HAL_ETH_DMATxDescListInit(); for Transmission process
+          (##) HAL_ETH_DMARxDescListInit(); for Reception process
+
+      (#)Enable MAC and DMA transmission and reception:
+          (##) HAL_ETH_Start();
+
+      (#)Prepare ETH DMA TX Descriptors and give the hand to ETH DMA to transfer 
+         the frame to MAC TX FIFO:
+         (##) HAL_ETH_TransmitFrame();
+
+      (#)Poll for a received frame in ETH RX DMA Descriptors and get received 
+         frame parameters
+         (##) HAL_ETH_GetReceivedFrame(); (should be called into an infinite loop)
+
+      (#) Get a received frame when an ETH RX interrupt occurs:
+         (##) HAL_ETH_GetReceivedFrame_IT(); (called in IT mode only)
+
+      (#) Communicate with external PHY device:
+         (##) Read a specific register from the PHY  
+              HAL_ETH_ReadPHYRegister();
+         (##) Write data to a specific RHY register:
+              HAL_ETH_WritePHYRegister();
+
+      (#) Configure the Ethernet MAC after ETH peripheral initialization
+          HAL_ETH_ConfigMAC(); all MAC parameters should be filled.
+      
+      (#) Configure the Ethernet DMA after ETH peripheral initialization
+          HAL_ETH_ConfigDMA(); all DMA parameters should be filled.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup ETH ETH 
+  * @brief ETH HAL module driver
+  * @{
+  */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup ETH_Private_Constants ETH Private Constants
+  * @{
+  */
+#define ETH_TIMEOUT_SWRESET                 ((uint32_t)500)  
+#define ETH_TIMEOUT_LINKED_STATE          ((uint32_t)5000)  
+#define ETH_TIMEOUT_AUTONEGO_COMPLETED    ((uint32_t)5000) 
+
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup ETH_Private_Functions ETH Private Functions
+  * @{
+  */
+static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err);
+static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr);
+static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth);
+static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth);
+static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth);
+static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth);
+static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth);
+static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth);
+static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth);
+static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth);
+static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth);
+
+/**
+  * @}
+  */
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup ETH_Exported_Functions ETH Exported Functions
+  * @{
+  */
+
+/** @defgroup ETH_Exported_Functions_Group1 Initialization and de-initialization functions 
+  *  @brief   Initialization and Configuration functions 
+  *
+  @verbatim    
+  ===============================================================================
+            ##### Initialization and de-initialization functions #####
+  ===============================================================================
+  [..]  This section provides functions allowing to:
+      (+) Initialize and configure the Ethernet peripheral
+      (+) De-initialize the Ethernet peripheral
+
+  @endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the Ethernet MAC and DMA according to default
+  *         parameters.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth)
+{
+  uint32_t tempreg = 0, phyreg = 0;
+  uint32_t hclk = 60000000;
+  uint32_t tickstart = 0;
+  uint32_t err = ETH_SUCCESS;
+  
+  /* Check the ETH peripheral state */
+  if(heth == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check parameters */
+  assert_param(IS_ETH_AUTONEGOTIATION(heth->Init.AutoNegotiation));
+  assert_param(IS_ETH_RX_MODE(heth->Init.RxMode));
+  assert_param(IS_ETH_CHECKSUM_MODE(heth->Init.ChecksumMode));
+  assert_param(IS_ETH_MEDIA_INTERFACE(heth->Init.MediaInterface));  
+  
+  if(heth->State == HAL_ETH_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    heth->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, NVIC. */
+    HAL_ETH_MspInit(heth);
+  }
+  
+  /* Enable SYSCFG Clock */
+  __HAL_RCC_SYSCFG_CLK_ENABLE();
+  
+  /* Select MII or RMII Mode*/
+  SYSCFG->PMC &= ~(SYSCFG_PMC_MII_RMII_SEL);
+  SYSCFG->PMC |= (uint32_t)heth->Init.MediaInterface;
+  
+  /* Ethernet Software reset */
+  /* Set the SWR bit: resets all MAC subsystem internal registers and logic */
+  /* After reset all the registers holds their respective reset values */
+  (heth->Instance)->DMABMR |= ETH_DMABMR_SR;
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  /* Wait for software reset */
+  while (((heth->Instance)->DMABMR & ETH_DMABMR_SR) != (uint32_t)RESET)
+  {
+    /* Check for the Timeout */
+    if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_SWRESET)
+    {     
+      heth->State= HAL_ETH_STATE_TIMEOUT;
+  
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+    
+      /* Note: The SWR is not performed if the ETH_RX_CLK or the ETH_TX_CLK are  
+         not available, please check your external PHY or the IO configuration */
+               
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  /*-------------------------------- MAC Initialization ----------------------*/
+  /* Get the ETHERNET MACMIIAR value */
+  tempreg = (heth->Instance)->MACMIIAR;
+  /* Clear CSR Clock Range CR[2:0] bits */
+  tempreg &= ETH_MACMIIAR_CR_MASK;
+  
+  /* Get hclk frequency value */
+  hclk = HAL_RCC_GetHCLKFreq();
+  
+  /* Set CR bits depending on hclk value */
+  if((hclk >= 20000000)&&(hclk < 35000000))
+  {
+    /* CSR Clock Range between 20-35 MHz */
+    tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div16;
+  }
+  else if((hclk >= 35000000)&&(hclk < 60000000))
+  {
+    /* CSR Clock Range between 35-60 MHz */ 
+    tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div26;
+  }  
+  else if((hclk >= 60000000)&&(hclk < 100000000))
+  {
+    /* CSR Clock Range between 60-100 MHz */ 
+    tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div42;
+  }  
+  else if((hclk >= 100000000)&&(hclk < 150000000))
+  {
+    /* CSR Clock Range between 100-150 MHz */ 
+    tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div62;
+  }
+  else /* ((hclk >= 150000000)&&(hclk <= 216000000)) */
+  {
+    /* CSR Clock Range between 150-216 MHz */ 
+    tempreg |= (uint32_t)ETH_MACMIIAR_CR_Div102;    
+  }
+  
+  /* Write to ETHERNET MAC MIIAR: Configure the ETHERNET CSR Clock Range */
+  (heth->Instance)->MACMIIAR = (uint32_t)tempreg;
+  
+  /*-------------------- PHY initialization and configuration ----------------*/
+  /* Put the PHY in reset mode */
+  if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_RESET)) != HAL_OK)
+  {
+    /* In case of write timeout */
+    err = ETH_ERROR;
+    
+    /* Config MAC and DMA */
+    ETH_MACDMAConfig(heth, err);
+    
+    /* Set the ETH peripheral state to READY */
+    heth->State = HAL_ETH_STATE_READY;
+    
+    /* Return HAL_ERROR */
+    return HAL_ERROR;
+  }
+  
+  /* Delay to assure PHY reset */
+  HAL_Delay(PHY_RESET_DELAY);
+  
+  if((heth->Init).AutoNegotiation != ETH_AUTONEGOTIATION_DISABLE)
+  {
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    
+    /* We wait for linked status */
+    do
+    {
+      HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
+      
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_LINKED_STATE)
+      {
+        /* In case of write timeout */
+        err = ETH_ERROR;
+      
+        /* Config MAC and DMA */
+        ETH_MACDMAConfig(heth, err);
+        
+        heth->State= HAL_ETH_STATE_READY;
+  
+        /* Process Unlocked */
+        __HAL_UNLOCK(heth);
+    
+        return HAL_TIMEOUT;
+      }
+    } while (((phyreg & PHY_LINKED_STATUS) != PHY_LINKED_STATUS));
+
+    
+    /* Enable Auto-Negotiation */
+    if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_AUTONEGOTIATION)) != HAL_OK)
+    {
+      /* In case of write timeout */
+      err = ETH_ERROR;
+      
+      /* Config MAC and DMA */
+      ETH_MACDMAConfig(heth, err);
+      
+      /* Set the ETH peripheral state to READY */
+      heth->State = HAL_ETH_STATE_READY;
+      
+      /* Return HAL_ERROR */
+      return HAL_ERROR;   
+    }
+    
+    /* Get tick */
+    tickstart = HAL_GetTick();
+    
+    /* Wait until the auto-negotiation will be completed */
+    do
+    {
+      HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
+      
+      /* Check for the Timeout */
+      if((HAL_GetTick() - tickstart ) > ETH_TIMEOUT_AUTONEGO_COMPLETED)
+      {
+        /* In case of write timeout */
+        err = ETH_ERROR;
+      
+        /* Config MAC and DMA */
+        ETH_MACDMAConfig(heth, err);
+        
+        heth->State= HAL_ETH_STATE_READY;
+  
+        /* Process Unlocked */
+        __HAL_UNLOCK(heth);
+    
+        return HAL_TIMEOUT;
+      }
+      
+    } while (((phyreg & PHY_AUTONEGO_COMPLETE) != PHY_AUTONEGO_COMPLETE));
+    
+    /* Read the result of the auto-negotiation */
+    if((HAL_ETH_ReadPHYRegister(heth, PHY_SR, &phyreg)) != HAL_OK)
+    {
+      /* In case of write timeout */
+      err = ETH_ERROR;
+      
+      /* Config MAC and DMA */
+      ETH_MACDMAConfig(heth, err);
+      
+      /* Set the ETH peripheral state to READY */
+      heth->State = HAL_ETH_STATE_READY;
+      
+      /* Return HAL_ERROR */
+      return HAL_ERROR;   
+    }
+    
+    /* Configure the MAC with the Duplex Mode fixed by the auto-negotiation process */
+    if((phyreg & PHY_DUPLEX_STATUS) != (uint32_t)RESET)
+    {
+      /* Set Ethernet duplex mode to Full-duplex following the auto-negotiation */
+      (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;  
+    }
+    else
+    {
+      /* Set Ethernet duplex mode to Half-duplex following the auto-negotiation */
+      (heth->Init).DuplexMode = ETH_MODE_HALFDUPLEX;           
+    }
+    /* Configure the MAC with the speed fixed by the auto-negotiation process */
+    if((phyreg & PHY_SPEED_STATUS) == PHY_SPEED_STATUS)
+    {  
+      /* Set Ethernet speed to 10M following the auto-negotiation */
+      (heth->Init).Speed = ETH_SPEED_10M; 
+    }
+    else
+    {   
+      /* Set Ethernet speed to 100M following the auto-negotiation */ 
+      (heth->Init).Speed = ETH_SPEED_100M;
+    }
+  }
+  else /* AutoNegotiation Disable */
+  {
+    /* Check parameters */
+    assert_param(IS_ETH_SPEED(heth->Init.Speed));
+    assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode));
+    
+    /* Set MAC Speed and Duplex Mode */
+    if(HAL_ETH_WritePHYRegister(heth, PHY_BCR, ((uint16_t)((heth->Init).DuplexMode >> 3) |
+                                                (uint16_t)((heth->Init).Speed >> 1))) != HAL_OK)
+    {
+      /* In case of write timeout */
+      err = ETH_ERROR;
+      
+      /* Config MAC and DMA */
+      ETH_MACDMAConfig(heth, err);
+      
+      /* Set the ETH peripheral state to READY */
+      heth->State = HAL_ETH_STATE_READY;
+      
+      /* Return HAL_ERROR */
+      return HAL_ERROR;
+    }  
+    
+    /* Delay to assure PHY configuration */
+    HAL_Delay(PHY_CONFIG_DELAY);
+  }
+  
+  /* Config MAC and DMA */
+  ETH_MACDMAConfig(heth, err);
+  
+  /* Set ETH HAL State to Ready */
+  heth->State= HAL_ETH_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  De-Initializes the ETH peripheral. 
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth)
+{
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */
+  HAL_ETH_MspDeInit(heth);
+  
+  /* Set ETH HAL state to Disabled */
+  heth->State= HAL_ETH_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(heth);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DMA Tx descriptors in chain mode.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module  
+  * @param  DMATxDescTab: Pointer to the first Tx desc list 
+  * @param  TxBuff: Pointer to the first TxBuffer list
+  * @param  TxBuffCount: Number of the used Tx desc in the list
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t *TxBuff, uint32_t TxBuffCount)
+{
+  uint32_t i = 0;
+  ETH_DMADescTypeDef *dmatxdesc;
+  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* Set the DMATxDescToSet pointer with the first one of the DMATxDescTab list */
+  heth->TxDesc = DMATxDescTab;
+  
+  /* Fill each DMATxDesc descriptor with the right values */   
+  for(i=0; i < TxBuffCount; i++)
+  {
+    /* Get the pointer on the ith member of the Tx Desc list */
+    dmatxdesc = DMATxDescTab + i;
+    
+    /* Set Second Address Chained bit */
+    dmatxdesc->Status = ETH_DMATXDESC_TCH;  
+    
+    /* Set Buffer1 address pointer */
+    dmatxdesc->Buffer1Addr = (uint32_t)(&TxBuff[i*ETH_TX_BUF_SIZE]);
+    
+    if ((heth->Init).ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
+    {
+      /* Set the DMA Tx descriptors checksum insertion */
+      dmatxdesc->Status |= ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL;
+    }
+    
+    /* Initialize the next descriptor with the Next Descriptor Polling Enable */
+    if(i < (TxBuffCount-1))
+    {
+      /* Set next descriptor address register with next descriptor base address */
+      dmatxdesc->Buffer2NextDescAddr = (uint32_t)(DMATxDescTab+i+1);
+    }
+    else
+    {
+      /* For last descriptor, set next descriptor address register equal to the first descriptor base address */ 
+      dmatxdesc->Buffer2NextDescAddr = (uint32_t) DMATxDescTab;  
+    }
+  }
+  
+  /* Set Transmit Descriptor List Address Register */
+  (heth->Instance)->DMATDLAR = (uint32_t) DMATxDescTab;
+  
+  /* Set ETH HAL State to Ready */
+  heth->State= HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the DMA Rx descriptors in chain mode.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module  
+  * @param  DMARxDescTab: Pointer to the first Rx desc list 
+  * @param  RxBuff: Pointer to the first RxBuffer list
+  * @param  RxBuffCount: Number of the used Rx desc in the list
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount)
+{
+  uint32_t i = 0;
+  ETH_DMADescTypeDef *DMARxDesc;
+  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* Set the Ethernet RxDesc pointer with the first one of the DMARxDescTab list */
+  heth->RxDesc = DMARxDescTab; 
+  
+  /* Fill each DMARxDesc descriptor with the right values */
+  for(i=0; i < RxBuffCount; i++)
+  {
+    /* Get the pointer on the ith member of the Rx Desc list */
+    DMARxDesc = DMARxDescTab+i;
+    
+    /* Set Own bit of the Rx descriptor Status */
+    DMARxDesc->Status = ETH_DMARXDESC_OWN;
+    
+    /* Set Buffer1 size and Second Address Chained bit */
+    DMARxDesc->ControlBufferSize = ETH_DMARXDESC_RCH | ETH_RX_BUF_SIZE;  
+    
+    /* Set Buffer1 address pointer */
+    DMARxDesc->Buffer1Addr = (uint32_t)(&RxBuff[i*ETH_RX_BUF_SIZE]);
+    
+    if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
+    {
+      /* Enable Ethernet DMA Rx Descriptor interrupt */
+      DMARxDesc->ControlBufferSize &= ~ETH_DMARXDESC_DIC;
+    }
+    
+    /* Initialize the next descriptor with the Next Descriptor Polling Enable */
+    if(i < (RxBuffCount-1))
+    {
+      /* Set next descriptor address register with next descriptor base address */
+      DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab+i+1); 
+    }
+    else
+    {
+      /* For last descriptor, set next descriptor address register equal to the first descriptor base address */ 
+      DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab); 
+    }
+  }
+  
+  /* Set Receive Descriptor List Address Register */
+  (heth->Instance)->DMARDLAR = (uint32_t) DMARxDescTab;
+  
+  /* Set ETH HAL State to Ready */
+  heth->State= HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the ETH MSP.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(heth);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_MspInit could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  DeInitializes ETH MSP.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(heth);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_MspDeInit could be implemented in the user file
+  */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Exported_Functions_Group2 IO operation functions 
+  *  @brief   Data transfers functions 
+  *
+  @verbatim   
+  ==============================================================================
+                          ##### IO operation functions #####
+  ==============================================================================  
+  [..]  This section provides functions allowing to:
+        (+) Transmit a frame
+            HAL_ETH_TransmitFrame();
+        (+) Receive a frame
+            HAL_ETH_GetReceivedFrame();
+            HAL_ETH_GetReceivedFrame_IT();
+        (+) Read from an External PHY register
+            HAL_ETH_ReadPHYRegister();
+        (+) Write to an External PHY register
+            HAL_ETH_WritePHYRegister();
+
+  @endverbatim
+  
+  * @{
+  */
+
+/**
+  * @brief  Sends an Ethernet frame. 
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  FrameLength: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength)
+{
+  uint32_t bufcount = 0, size = 0, i = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  if (FrameLength == 0) 
+  {
+    /* Set ETH HAL state to READY */
+    heth->State = HAL_ETH_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+    
+    return  HAL_ERROR;                                    
+  }  
+  
+  /* Check if the descriptor is owned by the ETHERNET DMA (when set) or CPU (when reset) */
+  if(((heth->TxDesc)->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET)
+  {  
+    /* OWN bit set */
+    heth->State = HAL_ETH_STATE_BUSY_TX;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+    
+    return HAL_ERROR;
+  }
+  
+  /* Get the number of needed Tx buffers for the current frame */
+  if (FrameLength > ETH_TX_BUF_SIZE)
+  {
+    bufcount = FrameLength/ETH_TX_BUF_SIZE;
+    if (FrameLength % ETH_TX_BUF_SIZE) 
+    {
+      bufcount++;
+    }
+  }
+  else 
+  {  
+    bufcount = 1;
+  }
+  if (bufcount == 1)
+  {
+    /* Set LAST and FIRST segment */
+    heth->TxDesc->Status |=ETH_DMATXDESC_FS|ETH_DMATXDESC_LS;
+    /* Set frame size */
+    heth->TxDesc->ControlBufferSize = (FrameLength & ETH_DMATXDESC_TBS1);
+    /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
+    heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
+    /* Point to next descriptor */
+    heth->TxDesc= (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
+  }
+  else
+  {
+    for (i=0; i< bufcount; i++)
+    {
+      /* Clear FIRST and LAST segment bits */
+      heth->TxDesc->Status &= ~(ETH_DMATXDESC_FS | ETH_DMATXDESC_LS);
+      
+      if (i == 0) 
+      {
+        /* Setting the first segment bit */
+        heth->TxDesc->Status |= ETH_DMATXDESC_FS;  
+      }
+      
+      /* Program size */
+      heth->TxDesc->ControlBufferSize = (ETH_TX_BUF_SIZE & ETH_DMATXDESC_TBS1);
+      
+      if (i == (bufcount-1))
+      {
+        /* Setting the last segment bit */
+        heth->TxDesc->Status |= ETH_DMATXDESC_LS;
+        size = FrameLength - (bufcount-1)*ETH_TX_BUF_SIZE;
+        heth->TxDesc->ControlBufferSize = (size & ETH_DMATXDESC_TBS1);
+      }
+      
+      /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
+      heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
+      /* point to next descriptor */
+      heth->TxDesc = (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
+    }
+  }
+  
+  /* When Tx Buffer unavailable flag is set: clear it and resume transmission */
+  if (((heth->Instance)->DMASR & ETH_DMASR_TBUS) != (uint32_t)RESET)
+  {
+    /* Clear TBUS ETHERNET DMA flag */
+    (heth->Instance)->DMASR = ETH_DMASR_TBUS;
+    /* Resume DMA transmission*/
+    (heth->Instance)->DMATPDR = 0;
+  }
+  
+  /* Set ETH HAL State to Ready */
+  heth->State = HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Checks for received frames. 
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth)
+{
+  uint32_t framelength = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Check the ETH state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* Check if segment is not owned by DMA */
+  /* (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET)) */
+  if(((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET))
+  {
+    /* Check if last segment */
+    if(((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET)) 
+    {
+      /* increment segment count */
+      (heth->RxFrameInfos).SegCount++;
+      
+      /* Check if last segment is first segment: one segment contains the frame */
+      if ((heth->RxFrameInfos).SegCount == 1)
+      {
+        (heth->RxFrameInfos).FSRxDesc =heth->RxDesc;
+      }
+      
+      heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
+      
+      /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
+      framelength = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4;
+      heth->RxFrameInfos.length = framelength;
+      
+      /* Get the address of the buffer start address */
+      heth->RxFrameInfos.buffer = ((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
+      /* point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) ((heth->RxDesc)->Buffer2NextDescAddr);
+      
+      /* Set HAL State to Ready */
+      heth->State = HAL_ETH_STATE_READY;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+      
+      /* Return function status */
+      return HAL_OK;
+    }
+    /* Check if first segment */
+    else if((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET)
+    {
+      (heth->RxFrameInfos).FSRxDesc = heth->RxDesc;
+      (heth->RxFrameInfos).LSRxDesc = NULL;
+      (heth->RxFrameInfos).SegCount = 1;
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+    }
+    /* Check if intermediate segment */ 
+    else
+    {
+      (heth->RxFrameInfos).SegCount++;
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+    } 
+  }
+  
+  /* Set ETH HAL State to Ready */
+  heth->State = HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  Gets the Received frame in interrupt mode. 
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth)
+{
+  uint32_t descriptorscancounter = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set ETH HAL State to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* Scan descriptors owned by CPU */
+  while (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && (descriptorscancounter < ETH_RXBUFNB))
+  {
+    /* Just for security */
+    descriptorscancounter++;
+    
+    /* Check if first segment in frame */
+    /* ((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)) */  
+    if((heth->RxDesc->Status & (ETH_DMARXDESC_FS | ETH_DMARXDESC_LS)) == (uint32_t)ETH_DMARXDESC_FS)
+    { 
+      heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
+      heth->RxFrameInfos.SegCount = 1;   
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+    }
+    /* Check if intermediate segment */
+    /* ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)&& ((heth->RxDesc->Status & ETH_DMARXDESC_FS) == (uint32_t)RESET)) */
+    else if ((heth->RxDesc->Status & (ETH_DMARXDESC_LS | ETH_DMARXDESC_FS)) == (uint32_t)RESET)
+    {
+      /* Increment segment count */
+      (heth->RxFrameInfos.SegCount)++;
+      /* Point to next descriptor */
+      heth->RxDesc = (ETH_DMADescTypeDef*)(heth->RxDesc->Buffer2NextDescAddr);
+    }
+    /* Should be last segment */
+    else
+    { 
+      /* Last segment */
+      heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
+      
+      /* Increment segment count */
+      (heth->RxFrameInfos.SegCount)++;
+      
+      /* Check if last segment is first segment: one segment contains the frame */
+      if ((heth->RxFrameInfos.SegCount) == 1)
+      {
+        heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
+      }
+      
+      /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
+      heth->RxFrameInfos.length = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4;
+      
+      /* Get the address of the buffer start address */ 
+      heth->RxFrameInfos.buffer =((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
+      
+      /* Point to next descriptor */      
+      heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
+      
+      /* Set HAL State to Ready */
+      heth->State = HAL_ETH_STATE_READY;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+  
+      /* Return function status */
+      return HAL_OK;
+    }
+  }
+
+  /* Set HAL State to Ready */
+  heth->State = HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  This function handles ETH interrupt request.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth)
+{
+  /* Frame received */
+  if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_R)) 
+  {
+    /* Receive complete callback */
+    HAL_ETH_RxCpltCallback(heth);
+    
+     /* Clear the Eth DMA Rx IT pending bits */
+    __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_R);
+
+    /* Set HAL State to Ready */
+    heth->State = HAL_ETH_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+
+  }
+  /* Frame transmitted */
+  else if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_T)) 
+  {
+    /* Transfer complete callback */
+    HAL_ETH_TxCpltCallback(heth);
+    
+    /* Clear the Eth DMA Tx IT pending bits */
+    __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_T);
+
+    /* Set HAL State to Ready */
+    heth->State = HAL_ETH_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+  }
+  
+  /* Clear the interrupt flags */
+  __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_NIS);
+  
+  /* ETH DMA Error */
+  if(__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_AIS))
+  {
+    /* Ethernet Error callback */
+    HAL_ETH_ErrorCallback(heth);
+
+    /* Clear the interrupt flags */
+    __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_FLAG_AIS);
+  
+    /* Set HAL State to Ready */
+    heth->State = HAL_ETH_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(heth);
+  }
+}
+
+/**
+  * @brief  Tx Transfer completed callbacks.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(heth);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_TxCpltCallback could be implemented in the user file
+  */ 
+}
+
+/**
+  * @brief  Rx Transfer completed callbacks.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(heth);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_TxCpltCallback could be implemented in the user file
+  */ 
+}
+
+/**
+  * @brief  Ethernet transfer error callbacks
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(heth);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_ETH_TxCpltCallback could be implemented in the user file
+  */ 
+}
+
+/**
+  * @brief  Reads a PHY register
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module                  
+  * @param PHYReg: PHY register address, is the index of one of the 32 PHY register. 
+  *                This parameter can be one of the following values: 
+  *                   PHY_BCR: Transceiver Basic Control Register, 
+  *                   PHY_BSR: Transceiver Basic Status Register.   
+  *                   More PHY register could be read depending on the used PHY
+  * @param RegValue: PHY register value                  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue)
+{
+  uint32_t tmpreg = 0;     
+  uint32_t tickstart = 0;
+  
+  /* Check parameters */
+  assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
+  
+  /* Check the ETH peripheral state */
+  if(heth->State == HAL_ETH_STATE_BUSY_RD)
+  {
+    return HAL_BUSY;
+  }
+  /* Set ETH HAL State to BUSY_RD */
+  heth->State = HAL_ETH_STATE_BUSY_RD;
+  
+  /* Get the ETHERNET MACMIIAR value */
+  tmpreg = heth->Instance->MACMIIAR;
+  
+  /* Keep only the CSR Clock Range CR[2:0] bits value */
+  tmpreg &= ~ETH_MACMIIAR_CR_MASK;
+  
+  /* Prepare the MII address register value */
+  tmpreg |=(((uint32_t)heth->Init.PhyAddress << 11) & ETH_MACMIIAR_PA); /* Set the PHY device address   */
+  tmpreg |=(((uint32_t)PHYReg<<6) & ETH_MACMIIAR_MR);                   /* Set the PHY register address */
+  tmpreg &= ~ETH_MACMIIAR_MW;                                           /* Set the read mode            */
+  tmpreg |= ETH_MACMIIAR_MB;                                            /* Set the MII Busy bit         */
+  
+  /* Write the result value into the MII Address register */
+  heth->Instance->MACMIIAR = tmpreg;
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  /* Check for the Busy flag */
+  while((tmpreg & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
+  {
+    /* Check for the Timeout */
+    if((HAL_GetTick() - tickstart ) > PHY_READ_TO)
+    {
+      heth->State= HAL_ETH_STATE_READY;
+  
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+    
+      return HAL_TIMEOUT;
+    }
+    
+    tmpreg = heth->Instance->MACMIIAR;
+  }
+  
+  /* Get MACMIIDR value */
+  *RegValue = (uint16_t)(heth->Instance->MACMIIDR);
+  
+  /* Set ETH HAL State to READY */
+  heth->State = HAL_ETH_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Writes to a PHY register.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module  
+  * @param  PHYReg: PHY register address, is the index of one of the 32 PHY register. 
+  *          This parameter can be one of the following values: 
+  *             PHY_BCR: Transceiver Control Register.  
+  *             More PHY register could be written depending on the used PHY
+  * @param  RegValue: the value to write
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue)
+{
+  uint32_t tmpreg = 0;
+  uint32_t tickstart = 0;
+  
+  /* Check parameters */
+  assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
+  
+  /* Check the ETH peripheral state */
+  if(heth->State == HAL_ETH_STATE_BUSY_WR)
+  {
+    return HAL_BUSY;
+  }
+  /* Set ETH HAL State to BUSY_WR */
+  heth->State = HAL_ETH_STATE_BUSY_WR;
+  
+  /* Get the ETHERNET MACMIIAR value */
+  tmpreg = heth->Instance->MACMIIAR;
+  
+  /* Keep only the CSR Clock Range CR[2:0] bits value */
+  tmpreg &= ~ETH_MACMIIAR_CR_MASK;
+  
+  /* Prepare the MII register address value */
+  tmpreg |=(((uint32_t)heth->Init.PhyAddress<<11) & ETH_MACMIIAR_PA); /* Set the PHY device address */
+  tmpreg |=(((uint32_t)PHYReg<<6) & ETH_MACMIIAR_MR);                 /* Set the PHY register address */
+  tmpreg |= ETH_MACMIIAR_MW;                                          /* Set the write mode */
+  tmpreg |= ETH_MACMIIAR_MB;                                          /* Set the MII Busy bit */
+  
+  /* Give the value to the MII data register */
+  heth->Instance->MACMIIDR = (uint16_t)RegValue;
+  
+  /* Write the result value into the MII Address register */
+  heth->Instance->MACMIIAR = tmpreg;
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  /* Check for the Busy flag */
+  while((tmpreg & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
+  {
+    /* Check for the Timeout */
+    if((HAL_GetTick() - tickstart ) > PHY_WRITE_TO)
+    {
+      heth->State= HAL_ETH_STATE_READY;
+  
+      /* Process Unlocked */
+      __HAL_UNLOCK(heth);
+    
+      return HAL_TIMEOUT;
+    }
+    
+    tmpreg = heth->Instance->MACMIIAR;
+  }
+  
+  /* Set ETH HAL State to READY */
+  heth->State = HAL_ETH_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK; 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief    Peripheral Control functions 
+ *
+@verbatim   
+ ===============================================================================
+                  ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Enable MAC and DMA transmission and reception.
+          HAL_ETH_Start();
+      (+) Disable MAC and DMA transmission and reception. 
+          HAL_ETH_Stop();
+      (+) Set the MAC configuration in runtime mode
+          HAL_ETH_ConfigMAC();
+      (+) Set the DMA configuration in runtime mode
+          HAL_ETH_ConfigDMA();
+
+@endverbatim
+  * @{
+  */ 
+
+ /**
+  * @brief  Enables Ethernet MAC and DMA reception/transmission 
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth)
+{  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* Enable transmit state machine of the MAC for transmission on the MII */
+  ETH_MACTransmissionEnable(heth);
+  
+  /* Enable receive state machine of the MAC for reception from the MII */
+  ETH_MACReceptionEnable(heth);
+  
+  /* Flush Transmit FIFO */
+  ETH_FlushTransmitFIFO(heth);
+  
+  /* Start DMA transmission */
+  ETH_DMATransmissionEnable(heth);
+  
+  /* Start DMA reception */
+  ETH_DMAReceptionEnable(heth);
+  
+  /* Set the ETH state to READY*/
+  heth->State= HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop Ethernet MAC and DMA reception/transmission 
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth)
+{  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State = HAL_ETH_STATE_BUSY;
+  
+  /* Stop DMA transmission */
+  ETH_DMATransmissionDisable(heth);
+  
+  /* Stop DMA reception */
+  ETH_DMAReceptionDisable(heth);
+  
+  /* Disable receive state machine of the MAC for reception from the MII */
+  ETH_MACReceptionDisable(heth);
+  
+  /* Flush Transmit FIFO */
+  ETH_FlushTransmitFIFO(heth);
+  
+  /* Disable transmit state machine of the MAC for transmission on the MII */
+  ETH_MACTransmissionDisable(heth);
+  
+  /* Set the ETH state*/
+  heth->State = HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set ETH MAC Configuration.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  macconf: MAC Configuration structure  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State= HAL_ETH_STATE_BUSY;
+  
+  assert_param(IS_ETH_SPEED(heth->Init.Speed));
+  assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode)); 
+  
+  if (macconf != NULL)
+  {
+    /* Check the parameters */
+    assert_param(IS_ETH_WATCHDOG(macconf->Watchdog));
+    assert_param(IS_ETH_JABBER(macconf->Jabber));
+    assert_param(IS_ETH_INTER_FRAME_GAP(macconf->InterFrameGap));
+    assert_param(IS_ETH_CARRIER_SENSE(macconf->CarrierSense));
+    assert_param(IS_ETH_RECEIVE_OWN(macconf->ReceiveOwn));
+    assert_param(IS_ETH_LOOPBACK_MODE(macconf->LoopbackMode));
+    assert_param(IS_ETH_CHECKSUM_OFFLOAD(macconf->ChecksumOffload));
+    assert_param(IS_ETH_RETRY_TRANSMISSION(macconf->RetryTransmission));
+    assert_param(IS_ETH_AUTOMATIC_PADCRC_STRIP(macconf->AutomaticPadCRCStrip));
+    assert_param(IS_ETH_BACKOFF_LIMIT(macconf->BackOffLimit));
+    assert_param(IS_ETH_DEFERRAL_CHECK(macconf->DeferralCheck));
+    assert_param(IS_ETH_RECEIVE_ALL(macconf->ReceiveAll));
+    assert_param(IS_ETH_SOURCE_ADDR_FILTER(macconf->SourceAddrFilter));
+    assert_param(IS_ETH_CONTROL_FRAMES(macconf->PassControlFrames));
+    assert_param(IS_ETH_BROADCAST_FRAMES_RECEPTION(macconf->BroadcastFramesReception));
+    assert_param(IS_ETH_DESTINATION_ADDR_FILTER(macconf->DestinationAddrFilter));
+    assert_param(IS_ETH_PROMISCUOUS_MODE(macconf->PromiscuousMode));
+    assert_param(IS_ETH_MULTICAST_FRAMES_FILTER(macconf->MulticastFramesFilter));
+    assert_param(IS_ETH_UNICAST_FRAMES_FILTER(macconf->UnicastFramesFilter));
+    assert_param(IS_ETH_PAUSE_TIME(macconf->PauseTime));
+    assert_param(IS_ETH_ZEROQUANTA_PAUSE(macconf->ZeroQuantaPause));
+    assert_param(IS_ETH_PAUSE_LOW_THRESHOLD(macconf->PauseLowThreshold));
+    assert_param(IS_ETH_UNICAST_PAUSE_FRAME_DETECT(macconf->UnicastPauseFrameDetect));
+    assert_param(IS_ETH_RECEIVE_FLOWCONTROL(macconf->ReceiveFlowControl));
+    assert_param(IS_ETH_TRANSMIT_FLOWCONTROL(macconf->TransmitFlowControl));
+    assert_param(IS_ETH_VLAN_TAG_COMPARISON(macconf->VLANTagComparison));
+    assert_param(IS_ETH_VLAN_TAG_IDENTIFIER(macconf->VLANTagIdentifier));
+    
+    /*------------------------ ETHERNET MACCR Configuration --------------------*/
+    /* Get the ETHERNET MACCR value */
+    tmpreg = (heth->Instance)->MACCR;
+    /* Clear WD, PCE, PS, TE and RE bits */
+    tmpreg &= ETH_MACCR_CLEAR_MASK;
+    
+    tmpreg |= (uint32_t)(macconf->Watchdog | 
+                         macconf->Jabber | 
+                         macconf->InterFrameGap |
+                         macconf->CarrierSense |
+                         (heth->Init).Speed | 
+                         macconf->ReceiveOwn |
+                         macconf->LoopbackMode |
+                         (heth->Init).DuplexMode | 
+                         macconf->ChecksumOffload |    
+                         macconf->RetryTransmission | 
+                         macconf->AutomaticPadCRCStrip | 
+                         macconf->BackOffLimit | 
+                         macconf->DeferralCheck);
+    
+    /* Write to ETHERNET MACCR */
+    (heth->Instance)->MACCR = (uint32_t)tmpreg;
+    
+    /* Wait until the write operation will be taken into account :
+    at least four TX_CLK/RX_CLK clock cycles */
+    tmpreg = (heth->Instance)->MACCR;
+    HAL_Delay(ETH_REG_WRITE_DELAY);
+    (heth->Instance)->MACCR = tmpreg; 
+    
+    /*----------------------- ETHERNET MACFFR Configuration --------------------*/ 
+    /* Write to ETHERNET MACFFR */  
+    (heth->Instance)->MACFFR = (uint32_t)(macconf->ReceiveAll | 
+                                          macconf->SourceAddrFilter |
+                                          macconf->PassControlFrames |
+                                          macconf->BroadcastFramesReception | 
+                                          macconf->DestinationAddrFilter |
+                                          macconf->PromiscuousMode |
+                                          macconf->MulticastFramesFilter |
+                                          macconf->UnicastFramesFilter);
+     
+     /* Wait until the write operation will be taken into account :
+     at least four TX_CLK/RX_CLK clock cycles */
+     tmpreg = (heth->Instance)->MACFFR;
+     HAL_Delay(ETH_REG_WRITE_DELAY);
+     (heth->Instance)->MACFFR = tmpreg;
+     
+     /*--------------- ETHERNET MACHTHR and MACHTLR Configuration ---------------*/
+     /* Write to ETHERNET MACHTHR */
+     (heth->Instance)->MACHTHR = (uint32_t)macconf->HashTableHigh;
+     
+     /* Write to ETHERNET MACHTLR */
+     (heth->Instance)->MACHTLR = (uint32_t)macconf->HashTableLow;
+     /*----------------------- ETHERNET MACFCR Configuration --------------------*/
+     
+     /* Get the ETHERNET MACFCR value */  
+     tmpreg = (heth->Instance)->MACFCR;
+     /* Clear xx bits */
+     tmpreg &= ETH_MACFCR_CLEAR_MASK;
+     
+     tmpreg |= (uint32_t)((macconf->PauseTime << 16) | 
+                          macconf->ZeroQuantaPause |
+                          macconf->PauseLowThreshold |
+                          macconf->UnicastPauseFrameDetect | 
+                          macconf->ReceiveFlowControl |
+                          macconf->TransmitFlowControl); 
+     
+     /* Write to ETHERNET MACFCR */
+     (heth->Instance)->MACFCR = (uint32_t)tmpreg;
+     
+     /* Wait until the write operation will be taken into account :
+     at least four TX_CLK/RX_CLK clock cycles */
+     tmpreg = (heth->Instance)->MACFCR;
+     HAL_Delay(ETH_REG_WRITE_DELAY);
+     (heth->Instance)->MACFCR = tmpreg;
+     
+     /*----------------------- ETHERNET MACVLANTR Configuration -----------------*/
+     (heth->Instance)->MACVLANTR = (uint32_t)(macconf->VLANTagComparison | 
+                                              macconf->VLANTagIdentifier);
+      
+      /* Wait until the write operation will be taken into account :
+      at least four TX_CLK/RX_CLK clock cycles */
+      tmpreg = (heth->Instance)->MACVLANTR;
+      HAL_Delay(ETH_REG_WRITE_DELAY);
+      (heth->Instance)->MACVLANTR = tmpreg;
+  }
+  else /* macconf == NULL : here we just configure Speed and Duplex mode */
+  {
+    /*------------------------ ETHERNET MACCR Configuration --------------------*/
+    /* Get the ETHERNET MACCR value */
+    tmpreg = (heth->Instance)->MACCR;
+    
+    /* Clear FES and DM bits */
+    tmpreg &= ~((uint32_t)0x00004800);
+    
+    tmpreg |= (uint32_t)(heth->Init.Speed | heth->Init.DuplexMode);
+    
+    /* Write to ETHERNET MACCR */
+    (heth->Instance)->MACCR = (uint32_t)tmpreg;
+    
+    /* Wait until the write operation will be taken into account:
+    at least four TX_CLK/RX_CLK clock cycles */
+    tmpreg = (heth->Instance)->MACCR;
+    HAL_Delay(ETH_REG_WRITE_DELAY);
+    (heth->Instance)->MACCR = tmpreg;
+  }
+  
+  /* Set the ETH state to Ready */
+  heth->State= HAL_ETH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(heth);
+  
+  /* Return function status */
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Sets ETH DMA Configuration.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  dmaconf: DMA Configuration structure  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf)
+{
+  uint32_t tmpreg = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(heth);
+  
+  /* Set the ETH peripheral state to BUSY */
+  heth->State= HAL_ETH_STATE_BUSY;
+
+  /* Check parameters */
+  assert_param(IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(dmaconf->DropTCPIPChecksumErrorFrame));
+  assert_param(IS_ETH_RECEIVE_STORE_FORWARD(dmaconf->ReceiveStoreForward));
+  assert_param(IS_ETH_FLUSH_RECEIVE_FRAME(dmaconf->FlushReceivedFrame));
+  assert_param(IS_ETH_TRANSMIT_STORE_FORWARD(dmaconf->TransmitStoreForward));
+  assert_param(IS_ETH_TRANSMIT_THRESHOLD_CONTROL(dmaconf->TransmitThresholdControl));
+  assert_param(IS_ETH_FORWARD_ERROR_FRAMES(dmaconf->ForwardErrorFrames));
+  assert_param(IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(dmaconf->ForwardUndersizedGoodFrames));
+  assert_param(IS_ETH_RECEIVE_THRESHOLD_CONTROL(dmaconf->ReceiveThresholdControl));
+  assert_param(IS_ETH_SECOND_FRAME_OPERATE(dmaconf->SecondFrameOperate));
+  assert_param(IS_ETH_ADDRESS_ALIGNED_BEATS(dmaconf->AddressAlignedBeats));
+  assert_param(IS_ETH_FIXED_BURST(dmaconf->FixedBurst));
+  assert_param(IS_ETH_RXDMA_BURST_LENGTH(dmaconf->RxDMABurstLength));
+  assert_param(IS_ETH_TXDMA_BURST_LENGTH(dmaconf->TxDMABurstLength));
+  assert_param(IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(dmaconf->EnhancedDescriptorFormat));
+  assert_param(IS_ETH_DMA_DESC_SKIP_LENGTH(dmaconf->DescriptorSkipLength));
+  assert_param(IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(dmaconf->DMAArbitration));
+  
+  /*----------------------- ETHERNET DMAOMR Configuration --------------------*/
+  /* Get the ETHERNET DMAOMR value */
+  tmpreg = (heth->Instance)->DMAOMR;
+  /* Clear xx bits */
+  tmpreg &= ETH_DMAOMR_CLEAR_MASK;
+
+  tmpreg |= (uint32_t)(dmaconf->DropTCPIPChecksumErrorFrame | 
+                       dmaconf->ReceiveStoreForward |
+                       dmaconf->FlushReceivedFrame |
+                       dmaconf->TransmitStoreForward | 
+                       dmaconf->TransmitThresholdControl |
+                       dmaconf->ForwardErrorFrames |
+                       dmaconf->ForwardUndersizedGoodFrames |
+                       dmaconf->ReceiveThresholdControl |
+                       dmaconf->SecondFrameOperate);
+
+  /* Write to ETHERNET DMAOMR */
+  (heth->Instance)->DMAOMR = (uint32_t)tmpreg;
+
+  /* Wait until the write operation will be taken into account:
+  at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg = (heth->Instance)->DMAOMR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->DMAOMR = tmpreg;
+
+  /*----------------------- ETHERNET DMABMR Configuration --------------------*/
+  (heth->Instance)->DMABMR = (uint32_t)(dmaconf->AddressAlignedBeats | 
+                                         dmaconf->FixedBurst |
+                                         dmaconf->RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
+                                         dmaconf->TxDMABurstLength |
+                                         dmaconf->EnhancedDescriptorFormat |
+                                         (dmaconf->DescriptorSkipLength << 2) |
+                                         dmaconf->DMAArbitration | 
+                                         ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
+
+   /* Wait until the write operation will be taken into account:
+      at least four TX_CLK/RX_CLK clock cycles */
+   tmpreg = (heth->Instance)->DMABMR;
+   HAL_Delay(ETH_REG_WRITE_DELAY);
+   (heth->Instance)->DMABMR = tmpreg;
+
+   /* Set the ETH state to Ready */
+   heth->State= HAL_ETH_STATE_READY;
+   
+   /* Process Unlocked */
+   __HAL_UNLOCK(heth);
+   
+   /* Return function status */
+   return HAL_OK; 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Exported_Functions_Group4 Peripheral State functions 
+  *  @brief   Peripheral State functions 
+  *
+  @verbatim   
+  ===============================================================================
+                         ##### Peripheral State functions #####
+  ===============================================================================  
+  [..]
+  This subsection permits to get in run-time the status of the peripheral 
+  and the data flow.
+       (+) Get the ETH handle state:
+           HAL_ETH_GetState();
+           
+
+  @endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the ETH HAL state
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval HAL state
+  */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth)
+{  
+  /* Return ETH state */
+  return heth->State;
+}
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+  
+/** @addtogroup ETH_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Configures Ethernet MAC and DMA with default parameters.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  err: Ethernet Init error
+  * @retval HAL status
+  */
+static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err)
+{
+  ETH_MACInitTypeDef macinit;
+  ETH_DMAInitTypeDef dmainit;
+  uint32_t tmpreg = 0;
+  
+  if (err != ETH_SUCCESS) /* Auto-negotiation failed */
+  {
+    /* Set Ethernet duplex mode to Full-duplex */
+    (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;
+    
+    /* Set Ethernet speed to 100M */
+    (heth->Init).Speed = ETH_SPEED_100M;
+  }
+  
+  /* Ethernet MAC default initialization **************************************/
+  macinit.Watchdog = ETH_WATCHDOG_ENABLE;
+  macinit.Jabber = ETH_JABBER_ENABLE;
+  macinit.InterFrameGap = ETH_INTERFRAMEGAP_96BIT;
+  macinit.CarrierSense = ETH_CARRIERSENCE_ENABLE;
+  macinit.ReceiveOwn = ETH_RECEIVEOWN_ENABLE;
+  macinit.LoopbackMode = ETH_LOOPBACKMODE_DISABLE;
+  if(heth->Init.ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
+  {
+    macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_ENABLE;
+  }
+  else
+  {
+    macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_DISABLE;
+  }
+  macinit.RetryTransmission = ETH_RETRYTRANSMISSION_DISABLE;
+  macinit.AutomaticPadCRCStrip = ETH_AUTOMATICPADCRCSTRIP_DISABLE;
+  macinit.BackOffLimit = ETH_BACKOFFLIMIT_10;
+  macinit.DeferralCheck = ETH_DEFFERRALCHECK_DISABLE;
+  macinit.ReceiveAll = ETH_RECEIVEAll_DISABLE;
+  macinit.SourceAddrFilter = ETH_SOURCEADDRFILTER_DISABLE;
+  macinit.PassControlFrames = ETH_PASSCONTROLFRAMES_BLOCKALL;
+  macinit.BroadcastFramesReception = ETH_BROADCASTFRAMESRECEPTION_ENABLE;
+  macinit.DestinationAddrFilter = ETH_DESTINATIONADDRFILTER_NORMAL;
+  macinit.PromiscuousMode = ETH_PROMISCUOUS_MODE_DISABLE;
+  macinit.MulticastFramesFilter = ETH_MULTICASTFRAMESFILTER_PERFECT;
+  macinit.UnicastFramesFilter = ETH_UNICASTFRAMESFILTER_PERFECT;
+  macinit.HashTableHigh = 0x0;
+  macinit.HashTableLow = 0x0;
+  macinit.PauseTime = 0x0;
+  macinit.ZeroQuantaPause = ETH_ZEROQUANTAPAUSE_DISABLE;
+  macinit.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS4;
+  macinit.UnicastPauseFrameDetect = ETH_UNICASTPAUSEFRAMEDETECT_DISABLE;
+  macinit.ReceiveFlowControl = ETH_RECEIVEFLOWCONTROL_DISABLE;
+  macinit.TransmitFlowControl = ETH_TRANSMITFLOWCONTROL_DISABLE;
+  macinit.VLANTagComparison = ETH_VLANTAGCOMPARISON_16BIT;
+  macinit.VLANTagIdentifier = 0x0;
+  
+  /*------------------------ ETHERNET MACCR Configuration --------------------*/
+  /* Get the ETHERNET MACCR value */
+  tmpreg = (heth->Instance)->MACCR;
+  /* Clear WD, PCE, PS, TE and RE bits */
+  tmpreg &= ETH_MACCR_CLEAR_MASK;
+  /* Set the WD bit according to ETH Watchdog value */
+  /* Set the JD: bit according to ETH Jabber value */
+  /* Set the IFG bit according to ETH InterFrameGap value */
+  /* Set the DCRS bit according to ETH CarrierSense value */
+  /* Set the FES bit according to ETH Speed value */ 
+  /* Set the DO bit according to ETH ReceiveOwn value */ 
+  /* Set the LM bit according to ETH LoopbackMode value */
+  /* Set the DM bit according to ETH Mode value */ 
+  /* Set the IPCO bit according to ETH ChecksumOffload value */
+  /* Set the DR bit according to ETH RetryTransmission value */
+  /* Set the ACS bit according to ETH AutomaticPadCRCStrip value */
+  /* Set the BL bit according to ETH BackOffLimit value */
+  /* Set the DC bit according to ETH DeferralCheck value */
+  tmpreg |= (uint32_t)(macinit.Watchdog | 
+                       macinit.Jabber | 
+                       macinit.InterFrameGap |
+                       macinit.CarrierSense |
+                       (heth->Init).Speed | 
+                       macinit.ReceiveOwn |
+                       macinit.LoopbackMode |
+                       (heth->Init).DuplexMode | 
+                       macinit.ChecksumOffload |    
+                       macinit.RetryTransmission | 
+                       macinit.AutomaticPadCRCStrip | 
+                       macinit.BackOffLimit | 
+                       macinit.DeferralCheck);
+  
+  /* Write to ETHERNET MACCR */
+  (heth->Instance)->MACCR = (uint32_t)tmpreg;
+  
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg = (heth->Instance)->MACCR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg; 
+  
+  /*----------------------- ETHERNET MACFFR Configuration --------------------*/ 
+  /* Set the RA bit according to ETH ReceiveAll value */
+  /* Set the SAF and SAIF bits according to ETH SourceAddrFilter value */
+  /* Set the PCF bit according to ETH PassControlFrames value */
+  /* Set the DBF bit according to ETH BroadcastFramesReception value */
+  /* Set the DAIF bit according to ETH DestinationAddrFilter value */
+  /* Set the PR bit according to ETH PromiscuousMode value */
+  /* Set the PM, HMC and HPF bits according to ETH MulticastFramesFilter value */
+  /* Set the HUC and HPF bits according to ETH UnicastFramesFilter value */
+  /* Write to ETHERNET MACFFR */  
+  (heth->Instance)->MACFFR = (uint32_t)(macinit.ReceiveAll | 
+                                        macinit.SourceAddrFilter |
+                                        macinit.PassControlFrames |
+                                        macinit.BroadcastFramesReception | 
+                                        macinit.DestinationAddrFilter |
+                                        macinit.PromiscuousMode |
+                                        macinit.MulticastFramesFilter |
+                                        macinit.UnicastFramesFilter);
+   
+   /* Wait until the write operation will be taken into account:
+      at least four TX_CLK/RX_CLK clock cycles */
+   tmpreg = (heth->Instance)->MACFFR;
+   HAL_Delay(ETH_REG_WRITE_DELAY);
+   (heth->Instance)->MACFFR = tmpreg;
+   
+   /*--------------- ETHERNET MACHTHR and MACHTLR Configuration --------------*/
+   /* Write to ETHERNET MACHTHR */
+   (heth->Instance)->MACHTHR = (uint32_t)macinit.HashTableHigh;
+   
+   /* Write to ETHERNET MACHTLR */
+   (heth->Instance)->MACHTLR = (uint32_t)macinit.HashTableLow;
+   /*----------------------- ETHERNET MACFCR Configuration -------------------*/
+   
+   /* Get the ETHERNET MACFCR value */  
+   tmpreg = (heth->Instance)->MACFCR;
+   /* Clear xx bits */
+   tmpreg &= ETH_MACFCR_CLEAR_MASK;
+   
+   /* Set the PT bit according to ETH PauseTime value */
+   /* Set the DZPQ bit according to ETH ZeroQuantaPause value */
+   /* Set the PLT bit according to ETH PauseLowThreshold value */
+   /* Set the UP bit according to ETH UnicastPauseFrameDetect value */
+   /* Set the RFE bit according to ETH ReceiveFlowControl value */
+   /* Set the TFE bit according to ETH TransmitFlowControl value */ 
+   tmpreg |= (uint32_t)((macinit.PauseTime << 16) | 
+                        macinit.ZeroQuantaPause |
+                        macinit.PauseLowThreshold |
+                        macinit.UnicastPauseFrameDetect | 
+                        macinit.ReceiveFlowControl |
+                        macinit.TransmitFlowControl); 
+   
+   /* Write to ETHERNET MACFCR */
+   (heth->Instance)->MACFCR = (uint32_t)tmpreg;
+   
+   /* Wait until the write operation will be taken into account:
+   at least four TX_CLK/RX_CLK clock cycles */
+   tmpreg = (heth->Instance)->MACFCR;
+   HAL_Delay(ETH_REG_WRITE_DELAY);
+   (heth->Instance)->MACFCR = tmpreg;
+   
+   /*----------------------- ETHERNET MACVLANTR Configuration ----------------*/
+   /* Set the ETV bit according to ETH VLANTagComparison value */
+   /* Set the VL bit according to ETH VLANTagIdentifier value */  
+   (heth->Instance)->MACVLANTR = (uint32_t)(macinit.VLANTagComparison | 
+                                            macinit.VLANTagIdentifier);
+    
+    /* Wait until the write operation will be taken into account:
+       at least four TX_CLK/RX_CLK clock cycles */
+    tmpreg = (heth->Instance)->MACVLANTR;
+    HAL_Delay(ETH_REG_WRITE_DELAY);
+    (heth->Instance)->MACVLANTR = tmpreg;
+    
+    /* Ethernet DMA default initialization ************************************/
+    dmainit.DropTCPIPChecksumErrorFrame = ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE;
+    dmainit.ReceiveStoreForward = ETH_RECEIVESTOREFORWARD_ENABLE;
+    dmainit.FlushReceivedFrame = ETH_FLUSHRECEIVEDFRAME_ENABLE;
+    dmainit.TransmitStoreForward = ETH_TRANSMITSTOREFORWARD_ENABLE;  
+    dmainit.TransmitThresholdControl = ETH_TRANSMITTHRESHOLDCONTROL_64BYTES;
+    dmainit.ForwardErrorFrames = ETH_FORWARDERRORFRAMES_DISABLE;
+    dmainit.ForwardUndersizedGoodFrames = ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE;
+    dmainit.ReceiveThresholdControl = ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES;
+    dmainit.SecondFrameOperate = ETH_SECONDFRAMEOPERARTE_ENABLE;
+    dmainit.AddressAlignedBeats = ETH_ADDRESSALIGNEDBEATS_ENABLE;
+    dmainit.FixedBurst = ETH_FIXEDBURST_ENABLE;
+    dmainit.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT;
+    dmainit.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT;
+    dmainit.EnhancedDescriptorFormat = ETH_DMAENHANCEDDESCRIPTOR_ENABLE;
+    dmainit.DescriptorSkipLength = 0x0;
+    dmainit.DMAArbitration = ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1;
+    
+    /* Get the ETHERNET DMAOMR value */
+    tmpreg = (heth->Instance)->DMAOMR;
+    /* Clear xx bits */
+    tmpreg &= ETH_DMAOMR_CLEAR_MASK;
+    
+    /* Set the DT bit according to ETH DropTCPIPChecksumErrorFrame value */
+    /* Set the RSF bit according to ETH ReceiveStoreForward value */
+    /* Set the DFF bit according to ETH FlushReceivedFrame value */
+    /* Set the TSF bit according to ETH TransmitStoreForward value */
+    /* Set the TTC bit according to ETH TransmitThresholdControl value */
+    /* Set the FEF bit according to ETH ForwardErrorFrames value */
+    /* Set the FUF bit according to ETH ForwardUndersizedGoodFrames value */
+    /* Set the RTC bit according to ETH ReceiveThresholdControl value */
+    /* Set the OSF bit according to ETH SecondFrameOperate value */
+    tmpreg |= (uint32_t)(dmainit.DropTCPIPChecksumErrorFrame | 
+                         dmainit.ReceiveStoreForward |
+                         dmainit.FlushReceivedFrame |
+                         dmainit.TransmitStoreForward | 
+                         dmainit.TransmitThresholdControl |
+                         dmainit.ForwardErrorFrames |
+                         dmainit.ForwardUndersizedGoodFrames |
+                         dmainit.ReceiveThresholdControl |
+                         dmainit.SecondFrameOperate);
+    
+    /* Write to ETHERNET DMAOMR */
+    (heth->Instance)->DMAOMR = (uint32_t)tmpreg;
+    
+    /* Wait until the write operation will be taken into account:
+       at least four TX_CLK/RX_CLK clock cycles */
+    tmpreg = (heth->Instance)->DMAOMR;
+    HAL_Delay(ETH_REG_WRITE_DELAY);
+    (heth->Instance)->DMAOMR = tmpreg;
+    
+    /*----------------------- ETHERNET DMABMR Configuration ------------------*/
+    /* Set the AAL bit according to ETH AddressAlignedBeats value */
+    /* Set the FB bit according to ETH FixedBurst value */
+    /* Set the RPBL and 4*PBL bits according to ETH RxDMABurstLength value */
+    /* Set the PBL and 4*PBL bits according to ETH TxDMABurstLength value */
+    /* Set the Enhanced DMA descriptors bit according to ETH EnhancedDescriptorFormat value*/
+    /* Set the DSL bit according to ETH DesciptorSkipLength value */
+    /* Set the PR and DA bits according to ETH DMAArbitration value */
+    (heth->Instance)->DMABMR = (uint32_t)(dmainit.AddressAlignedBeats | 
+                                          dmainit.FixedBurst |
+                                          dmainit.RxDMABurstLength |    /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
+                                          dmainit.TxDMABurstLength |
+                                          dmainit.EnhancedDescriptorFormat |
+                                          (dmainit.DescriptorSkipLength << 2) |
+                                          dmainit.DMAArbitration |
+                                          ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
+     
+     /* Wait until the write operation will be taken into account:
+        at least four TX_CLK/RX_CLK clock cycles */
+     tmpreg = (heth->Instance)->DMABMR;
+     HAL_Delay(ETH_REG_WRITE_DELAY);
+     (heth->Instance)->DMABMR = tmpreg;
+
+     if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
+     {
+       /* Enable the Ethernet Rx Interrupt */
+       __HAL_ETH_DMA_ENABLE_IT((heth), ETH_DMA_IT_NIS | ETH_DMA_IT_R);
+     }
+
+     /* Initialize MAC address in ethernet MAC */ 
+     ETH_MACAddressConfig(heth, ETH_MAC_ADDRESS0, heth->Init.MACAddr);
+}
+
+/**
+  * @brief  Configures the selected MAC address.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @param  MacAddr: The MAC address to configure
+  *          This parameter can be one of the following values:
+  *             @arg ETH_MAC_Address0: MAC Address0 
+  *             @arg ETH_MAC_Address1: MAC Address1 
+  *             @arg ETH_MAC_Address2: MAC Address2
+  *             @arg ETH_MAC_Address3: MAC Address3
+  * @param  Addr: Pointer to MAC address buffer data (6 bytes)
+  * @retval HAL status
+  */
+static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr)
+{
+  uint32_t tmpreg;
+  
+  /* Check the parameters */
+  assert_param(IS_ETH_MAC_ADDRESS0123(MacAddr));
+  
+  /* Calculate the selected MAC address high register */
+  tmpreg = ((uint32_t)Addr[5] << 8) | (uint32_t)Addr[4];
+  /* Load the selected MAC address high register */
+  (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_HBASE + MacAddr))) = tmpreg;
+  /* Calculate the selected MAC address low register */
+  tmpreg = ((uint32_t)Addr[3] << 24) | ((uint32_t)Addr[2] << 16) | ((uint32_t)Addr[1] << 8) | Addr[0];
+  
+  /* Load the selected MAC address low register */
+  (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_LBASE + MacAddr))) = tmpreg;
+}
+
+/**
+  * @brief  Enables the MAC transmission.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module  
+  * @retval None
+  */
+static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth)
+{ 
+  __IO uint32_t tmpreg = 0;
+  
+  /* Enable the MAC transmission */
+  (heth->Instance)->MACCR |= ETH_MACCR_TE;
+  
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg = (heth->Instance)->MACCR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg;
+}
+
+/**
+  * @brief  Disables the MAC transmission.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module  
+  * @retval None
+  */
+static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth)
+{ 
+  __IO uint32_t tmpreg = 0;
+  
+  /* Disable the MAC transmission */
+  (heth->Instance)->MACCR &= ~ETH_MACCR_TE;
+  
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg = (heth->Instance)->MACCR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg;
+}
+
+/**
+  * @brief  Enables the MAC reception.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module   
+  * @retval None
+  */
+static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth)
+{ 
+  __IO uint32_t tmpreg = 0;
+  
+  /* Enable the MAC reception */
+  (heth->Instance)->MACCR |= ETH_MACCR_RE;
+  
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg = (heth->Instance)->MACCR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg;
+}
+
+/**
+  * @brief  Disables the MAC reception.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module   
+  * @retval None
+  */
+static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth)
+{ 
+  __IO uint32_t tmpreg = 0;
+  
+  /* Disable the MAC reception */
+  (heth->Instance)->MACCR &= ~ETH_MACCR_RE; 
+  
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg = (heth->Instance)->MACCR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->MACCR = tmpreg;
+}
+
+/**
+  * @brief  Enables the DMA transmission.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module   
+  * @retval None
+  */
+static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth)
+{
+  /* Enable the DMA transmission */
+  (heth->Instance)->DMAOMR |= ETH_DMAOMR_ST;  
+}
+
+/**
+  * @brief  Disables the DMA transmission.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module   
+  * @retval None
+  */
+static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth)
+{ 
+  /* Disable the DMA transmission */
+  (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_ST;
+}
+
+/**
+  * @brief  Enables the DMA reception.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module 
+  * @retval None
+  */
+static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth)
+{  
+  /* Enable the DMA reception */
+  (heth->Instance)->DMAOMR |= ETH_DMAOMR_SR;  
+}
+
+/**
+  * @brief  Disables the DMA reception.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module 
+  * @retval None
+  */
+static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth)
+{ 
+  /* Disable the DMA reception */
+  (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_SR;
+}
+
+/**
+  * @brief  Clears the ETHERNET transmit FIFO.
+  * @param  heth: pointer to a ETH_HandleTypeDef structure that contains
+  *         the configuration information for ETHERNET module
+  * @retval None
+  */
+static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth)
+{
+  __IO uint32_t tmpreg = 0;
+  
+  /* Set the Flush Transmit FIFO bit */
+  (heth->Instance)->DMAOMR |= ETH_DMAOMR_FTF;
+  
+  /* Wait until the write operation will be taken into account:
+     at least four TX_CLK/RX_CLK clock cycles */
+  tmpreg = (heth->Instance)->DMAOMR;
+  HAL_Delay(ETH_REG_WRITE_DELAY);
+  (heth->Instance)->DMAOMR = tmpreg;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_ETH_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_eth.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,2214 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_eth.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of ETH HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_ETH_H
+#define __STM32F7xx_HAL_ETH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup ETH
+  * @{
+  */ 
+  
+/** @addtogroup ETH_Private_Macros
+  * @{
+  */
+#define IS_ETH_PHY_ADDRESS(ADDRESS) ((ADDRESS) <= 0x20)
+#define IS_ETH_AUTONEGOTIATION(CMD) (((CMD) == ETH_AUTONEGOTIATION_ENABLE) || \
+                                     ((CMD) == ETH_AUTONEGOTIATION_DISABLE))
+#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \
+                             ((SPEED) == ETH_SPEED_100M))
+#define IS_ETH_DUPLEX_MODE(MODE)  (((MODE) == ETH_MODE_FULLDUPLEX) || \
+                                  ((MODE) == ETH_MODE_HALFDUPLEX))
+#define IS_ETH_RX_MODE(MODE)    (((MODE) == ETH_RXPOLLING_MODE) || \
+                                 ((MODE) == ETH_RXINTERRUPT_MODE)) 
+#define IS_ETH_CHECKSUM_MODE(MODE)    (((MODE) == ETH_CHECKSUM_BY_HARDWARE) || \
+                                      ((MODE) == ETH_CHECKSUM_BY_SOFTWARE))
+#define IS_ETH_MEDIA_INTERFACE(MODE)         (((MODE) == ETH_MEDIA_INTERFACE_MII) || \
+                                              ((MODE) == ETH_MEDIA_INTERFACE_RMII))
+#define IS_ETH_WATCHDOG(CMD) (((CMD) == ETH_WATCHDOG_ENABLE) || \
+                              ((CMD) == ETH_WATCHDOG_DISABLE))
+#define IS_ETH_JABBER(CMD) (((CMD) == ETH_JABBER_ENABLE) || \
+                            ((CMD) == ETH_JABBER_DISABLE))
+#define IS_ETH_INTER_FRAME_GAP(GAP) (((GAP) == ETH_INTERFRAMEGAP_96BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_88BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_80BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_72BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_64BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_56BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_48BIT) || \
+                                     ((GAP) == ETH_INTERFRAMEGAP_40BIT))
+#define IS_ETH_CARRIER_SENSE(CMD) (((CMD) == ETH_CARRIERSENCE_ENABLE) || \
+                                   ((CMD) == ETH_CARRIERSENCE_DISABLE))
+#define IS_ETH_RECEIVE_OWN(CMD) (((CMD) == ETH_RECEIVEOWN_ENABLE) || \
+                                 ((CMD) == ETH_RECEIVEOWN_DISABLE))
+#define IS_ETH_LOOPBACK_MODE(CMD) (((CMD) == ETH_LOOPBACKMODE_ENABLE) || \
+                                   ((CMD) == ETH_LOOPBACKMODE_DISABLE))
+#define IS_ETH_CHECKSUM_OFFLOAD(CMD) (((CMD) == ETH_CHECKSUMOFFLAOD_ENABLE) || \
+                                      ((CMD) == ETH_CHECKSUMOFFLAOD_DISABLE))
+#define IS_ETH_RETRY_TRANSMISSION(CMD) (((CMD) == ETH_RETRYTRANSMISSION_ENABLE) || \
+                                        ((CMD) == ETH_RETRYTRANSMISSION_DISABLE))
+#define IS_ETH_AUTOMATIC_PADCRC_STRIP(CMD) (((CMD) == ETH_AUTOMATICPADCRCSTRIP_ENABLE) || \
+                                            ((CMD) == ETH_AUTOMATICPADCRCSTRIP_DISABLE))
+#define IS_ETH_BACKOFF_LIMIT(LIMIT) (((LIMIT) == ETH_BACKOFFLIMIT_10) || \
+                                     ((LIMIT) == ETH_BACKOFFLIMIT_8) || \
+                                     ((LIMIT) == ETH_BACKOFFLIMIT_4) || \
+                                     ((LIMIT) == ETH_BACKOFFLIMIT_1))
+#define IS_ETH_DEFERRAL_CHECK(CMD) (((CMD) == ETH_DEFFERRALCHECK_ENABLE) || \
+                                    ((CMD) == ETH_DEFFERRALCHECK_DISABLE))
+#define IS_ETH_RECEIVE_ALL(CMD) (((CMD) == ETH_RECEIVEALL_ENABLE) || \
+                                 ((CMD) == ETH_RECEIVEAll_DISABLE))
+#define IS_ETH_SOURCE_ADDR_FILTER(CMD) (((CMD) == ETH_SOURCEADDRFILTER_NORMAL_ENABLE) || \
+                                        ((CMD) == ETH_SOURCEADDRFILTER_INVERSE_ENABLE) || \
+                                        ((CMD) == ETH_SOURCEADDRFILTER_DISABLE))
+#define IS_ETH_CONTROL_FRAMES(PASS) (((PASS) == ETH_PASSCONTROLFRAMES_BLOCKALL) || \
+                                     ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDALL) || \
+                                     ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER))
+#define IS_ETH_BROADCAST_FRAMES_RECEPTION(CMD) (((CMD) == ETH_BROADCASTFRAMESRECEPTION_ENABLE) || \
+                                                ((CMD) == ETH_BROADCASTFRAMESRECEPTION_DISABLE))
+#define IS_ETH_DESTINATION_ADDR_FILTER(FILTER) (((FILTER) == ETH_DESTINATIONADDRFILTER_NORMAL) || \
+                                                ((FILTER) == ETH_DESTINATIONADDRFILTER_INVERSE))
+#define IS_ETH_PROMISCUOUS_MODE(CMD) (((CMD) == ETH_PROMISCUOUS_MODE_ENABLE) || \
+                                      ((CMD) == ETH_PROMISCUOUS_MODE_DISABLE))
+#define IS_ETH_MULTICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+                                                ((FILTER) == ETH_MULTICASTFRAMESFILTER_HASHTABLE) || \
+                                                ((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECT) || \
+                                                ((FILTER) == ETH_MULTICASTFRAMESFILTER_NONE))
+#define IS_ETH_UNICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+                                              ((FILTER) == ETH_UNICASTFRAMESFILTER_HASHTABLE) || \
+                                              ((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECT))
+#define IS_ETH_PAUSE_TIME(TIME) ((TIME) <= 0xFFFF)
+#define IS_ETH_ZEROQUANTA_PAUSE(CMD)   (((CMD) == ETH_ZEROQUANTAPAUSE_ENABLE) || \
+                                        ((CMD) == ETH_ZEROQUANTAPAUSE_DISABLE))
+#define IS_ETH_PAUSE_LOW_THRESHOLD(THRESHOLD) (((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS4) || \
+                                               ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS28) || \
+                                               ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS144) || \
+                                               ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS256))
+#define IS_ETH_UNICAST_PAUSE_FRAME_DETECT(CMD) (((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_ENABLE) || \
+                                                ((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_DISABLE))
+#define IS_ETH_RECEIVE_FLOWCONTROL(CMD) (((CMD) == ETH_RECEIVEFLOWCONTROL_ENABLE) || \
+                                         ((CMD) == ETH_RECEIVEFLOWCONTROL_DISABLE))
+#define IS_ETH_TRANSMIT_FLOWCONTROL(CMD) (((CMD) == ETH_TRANSMITFLOWCONTROL_ENABLE) || \
+                                          ((CMD) == ETH_TRANSMITFLOWCONTROL_DISABLE))
+#define IS_ETH_VLAN_TAG_COMPARISON(COMPARISON) (((COMPARISON) == ETH_VLANTAGCOMPARISON_12BIT) || \
+                                                ((COMPARISON) == ETH_VLANTAGCOMPARISON_16BIT))
+#define IS_ETH_VLAN_TAG_IDENTIFIER(IDENTIFIER) ((IDENTIFIER) <= 0xFFFF)
+#define IS_ETH_MAC_ADDRESS0123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS0) || \
+                                         ((ADDRESS) == ETH_MAC_ADDRESS1) || \
+                                         ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+                                         ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS1) || \
+                                        ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+                                        ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS_FILTER(FILTER) (((FILTER) == ETH_MAC_ADDRESSFILTER_SA) || \
+                                           ((FILTER) == ETH_MAC_ADDRESSFILTER_DA))
+#define IS_ETH_MAC_ADDRESS_MASK(MASK) (((MASK) == ETH_MAC_ADDRESSMASK_BYTE6) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE5) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE4) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE3) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE2) || \
+                                       ((MASK) == ETH_MAC_ADDRESSMASK_BYTE1))
+#define IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(CMD) (((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE) || \
+                                               ((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE))
+#define IS_ETH_RECEIVE_STORE_FORWARD(CMD) (((CMD) == ETH_RECEIVESTOREFORWARD_ENABLE) || \
+                                           ((CMD) == ETH_RECEIVESTOREFORWARD_DISABLE))
+#define IS_ETH_FLUSH_RECEIVE_FRAME(CMD) (((CMD) == ETH_FLUSHRECEIVEDFRAME_ENABLE) || \
+                                         ((CMD) == ETH_FLUSHRECEIVEDFRAME_DISABLE))
+#define IS_ETH_TRANSMIT_STORE_FORWARD(CMD) (((CMD) == ETH_TRANSMITSTOREFORWARD_ENABLE) || \
+                                            ((CMD) == ETH_TRANSMITSTOREFORWARD_DISABLE))
+#define IS_ETH_TRANSMIT_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_64BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_128BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_192BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_256BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_40BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_32BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_24BYTES) || \
+                                                      ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_16BYTES))
+#define IS_ETH_FORWARD_ERROR_FRAMES(CMD) (((CMD) == ETH_FORWARDERRORFRAMES_ENABLE) || \
+                                          ((CMD) == ETH_FORWARDERRORFRAMES_DISABLE))
+#define IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(CMD) (((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE) || \
+                                                    ((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE))
+#define IS_ETH_RECEIVE_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES) || \
+                                                     ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES) || \
+                                                     ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES) || \
+                                                     ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES))
+#define IS_ETH_SECOND_FRAME_OPERATE(CMD) (((CMD) == ETH_SECONDFRAMEOPERARTE_ENABLE) || \
+                                          ((CMD) == ETH_SECONDFRAMEOPERARTE_DISABLE))
+#define IS_ETH_ADDRESS_ALIGNED_BEATS(CMD) (((CMD) == ETH_ADDRESSALIGNEDBEATS_ENABLE) || \
+                                           ((CMD) == ETH_ADDRESSALIGNEDBEATS_DISABLE))
+#define IS_ETH_FIXED_BURST(CMD) (((CMD) == ETH_FIXEDBURST_ENABLE) || \
+                                 ((CMD) == ETH_FIXEDBURST_DISABLE))
+#define IS_ETH_RXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_RXDMABURSTLENGTH_1BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_2BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_8BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_16BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_32BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_4BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_8BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_16BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_32BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_64BEAT) || \
+                                           ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_TXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_TXDMABURSTLENGTH_1BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_2BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_8BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_16BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_32BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_4BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_8BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_16BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_32BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_64BEAT) || \
+                                           ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_DMA_DESC_SKIP_LENGTH(LENGTH) ((LENGTH) <= 0x1F)
+#define IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(RATIO) (((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1) || \
+                                                       ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1) || \
+                                                       ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1) || \
+                                                       ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1) || \
+                                                       ((RATIO) == ETH_DMAARBITRATION_RXPRIORTX))
+#define IS_ETH_DMATXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMATXDESC_OWN) || \
+                                         ((FLAG) == ETH_DMATXDESC_IC) || \
+                                         ((FLAG) == ETH_DMATXDESC_LS) || \
+                                         ((FLAG) == ETH_DMATXDESC_FS) || \
+                                         ((FLAG) == ETH_DMATXDESC_DC) || \
+                                         ((FLAG) == ETH_DMATXDESC_DP) || \
+                                         ((FLAG) == ETH_DMATXDESC_TTSE) || \
+                                         ((FLAG) == ETH_DMATXDESC_TER) || \
+                                         ((FLAG) == ETH_DMATXDESC_TCH) || \
+                                         ((FLAG) == ETH_DMATXDESC_TTSS) || \
+                                         ((FLAG) == ETH_DMATXDESC_IHE) || \
+                                         ((FLAG) == ETH_DMATXDESC_ES) || \
+                                         ((FLAG) == ETH_DMATXDESC_JT) || \
+                                         ((FLAG) == ETH_DMATXDESC_FF) || \
+                                         ((FLAG) == ETH_DMATXDESC_PCE) || \
+                                         ((FLAG) == ETH_DMATXDESC_LCA) || \
+                                         ((FLAG) == ETH_DMATXDESC_NC) || \
+                                         ((FLAG) == ETH_DMATXDESC_LCO) || \
+                                         ((FLAG) == ETH_DMATXDESC_EC) || \
+                                         ((FLAG) == ETH_DMATXDESC_VF) || \
+                                         ((FLAG) == ETH_DMATXDESC_CC) || \
+                                         ((FLAG) == ETH_DMATXDESC_ED) || \
+                                         ((FLAG) == ETH_DMATXDESC_UF) || \
+                                         ((FLAG) == ETH_DMATXDESC_DB))
+#define IS_ETH_DMA_TXDESC_SEGMENT(SEGMENT) (((SEGMENT) == ETH_DMATXDESC_LASTSEGMENTS) || \
+                                            ((SEGMENT) == ETH_DMATXDESC_FIRSTSEGMENT))
+#define IS_ETH_DMA_TXDESC_CHECKSUM(CHECKSUM) (((CHECKSUM) == ETH_DMATXDESC_CHECKSUMBYPASS) || \
+                                              ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMIPV4HEADER) || \
+                                              ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT) || \
+                                              ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL))
+#define IS_ETH_DMATXDESC_BUFFER_SIZE(SIZE) ((SIZE) <= 0x1FFF)
+#define IS_ETH_DMARXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMARXDESC_OWN) || \
+                                         ((FLAG) == ETH_DMARXDESC_AFM) || \
+                                         ((FLAG) == ETH_DMARXDESC_ES) || \
+                                         ((FLAG) == ETH_DMARXDESC_DE) || \
+                                         ((FLAG) == ETH_DMARXDESC_SAF) || \
+                                         ((FLAG) == ETH_DMARXDESC_LE) || \
+                                         ((FLAG) == ETH_DMARXDESC_OE) || \
+                                         ((FLAG) == ETH_DMARXDESC_VLAN) || \
+                                         ((FLAG) == ETH_DMARXDESC_FS) || \
+                                         ((FLAG) == ETH_DMARXDESC_LS) || \
+                                         ((FLAG) == ETH_DMARXDESC_IPV4HCE) || \
+                                         ((FLAG) == ETH_DMARXDESC_LC) || \
+                                         ((FLAG) == ETH_DMARXDESC_FT) || \
+                                         ((FLAG) == ETH_DMARXDESC_RWT) || \
+                                         ((FLAG) == ETH_DMARXDESC_RE) || \
+                                         ((FLAG) == ETH_DMARXDESC_DBE) || \
+                                         ((FLAG) == ETH_DMARXDESC_CE) || \
+                                         ((FLAG) == ETH_DMARXDESC_MAMPCE))
+#define IS_ETH_DMA_RXDESC_BUFFER(BUFFER) (((BUFFER) == ETH_DMARXDESC_BUFFER1) || \
+                                          ((BUFFER) == ETH_DMARXDESC_BUFFER2))
+#define IS_ETH_PMT_GET_FLAG(FLAG) (((FLAG) == ETH_PMT_FLAG_WUFR) || \
+                                   ((FLAG) == ETH_PMT_FLAG_MPR))
+#define IS_ETH_DMA_FLAG(FLAG) ((((FLAG) & (uint32_t)0xC7FE1800) == 0x00) && ((FLAG) != 0x00)) 
+#define IS_ETH_DMA_GET_FLAG(FLAG) (((FLAG) == ETH_DMA_FLAG_TST) || ((FLAG) == ETH_DMA_FLAG_PMT) || \
+                                   ((FLAG) == ETH_DMA_FLAG_MMC) || ((FLAG) == ETH_DMA_FLAG_DATATRANSFERERROR) || \
+                                   ((FLAG) == ETH_DMA_FLAG_READWRITEERROR) || ((FLAG) == ETH_DMA_FLAG_ACCESSERROR) || \
+                                   ((FLAG) == ETH_DMA_FLAG_NIS) || ((FLAG) == ETH_DMA_FLAG_AIS) || \
+                                   ((FLAG) == ETH_DMA_FLAG_ER) || ((FLAG) == ETH_DMA_FLAG_FBE) || \
+                                   ((FLAG) == ETH_DMA_FLAG_ET) || ((FLAG) == ETH_DMA_FLAG_RWT) || \
+                                   ((FLAG) == ETH_DMA_FLAG_RPS) || ((FLAG) == ETH_DMA_FLAG_RBU) || \
+                                   ((FLAG) == ETH_DMA_FLAG_R) || ((FLAG) == ETH_DMA_FLAG_TU) || \
+                                   ((FLAG) == ETH_DMA_FLAG_RO) || ((FLAG) == ETH_DMA_FLAG_TJT) || \
+                                   ((FLAG) == ETH_DMA_FLAG_TBU) || ((FLAG) == ETH_DMA_FLAG_TPS) || \
+                                   ((FLAG) == ETH_DMA_FLAG_T))
+#define IS_ETH_MAC_IT(IT) ((((IT) & (uint32_t)0xFFFFFDF1) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_MAC_GET_IT(IT) (((IT) == ETH_MAC_IT_TST) || ((IT) == ETH_MAC_IT_MMCT) || \
+                               ((IT) == ETH_MAC_IT_MMCR) || ((IT) == ETH_MAC_IT_MMC) || \
+                               ((IT) == ETH_MAC_IT_PMT))
+#define IS_ETH_MAC_GET_FLAG(FLAG) (((FLAG) == ETH_MAC_FLAG_TST) || ((FLAG) == ETH_MAC_FLAG_MMCT) || \
+                                   ((FLAG) == ETH_MAC_FLAG_MMCR) || ((FLAG) == ETH_MAC_FLAG_MMC) || \
+                                   ((FLAG) == ETH_MAC_FLAG_PMT))
+#define IS_ETH_DMA_IT(IT) ((((IT) & (uint32_t)0xC7FE1800) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_DMA_GET_IT(IT) (((IT) == ETH_DMA_IT_TST) || ((IT) == ETH_DMA_IT_PMT) || \
+                               ((IT) == ETH_DMA_IT_MMC) || ((IT) == ETH_DMA_IT_NIS) || \
+                               ((IT) == ETH_DMA_IT_AIS) || ((IT) == ETH_DMA_IT_ER) || \
+                               ((IT) == ETH_DMA_IT_FBE) || ((IT) == ETH_DMA_IT_ET) || \
+                               ((IT) == ETH_DMA_IT_RWT) || ((IT) == ETH_DMA_IT_RPS) || \
+                               ((IT) == ETH_DMA_IT_RBU) || ((IT) == ETH_DMA_IT_R) || \
+                               ((IT) == ETH_DMA_IT_TU) || ((IT) == ETH_DMA_IT_RO) || \
+                               ((IT) == ETH_DMA_IT_TJT) || ((IT) == ETH_DMA_IT_TBU) || \
+                               ((IT) == ETH_DMA_IT_TPS) || ((IT) == ETH_DMA_IT_T))
+#define IS_ETH_DMA_GET_OVERFLOW(OVERFLOW) (((OVERFLOW) == ETH_DMA_OVERFLOW_RXFIFOCOUNTER) || \
+                                           ((OVERFLOW) == ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER))
+#define IS_ETH_MMC_IT(IT) (((((IT) & (uint32_t)0xFFDF3FFF) == 0x00) || (((IT) & (uint32_t)0xEFFDFF9F) == 0x00)) && \
+                           ((IT) != 0x00))
+#define IS_ETH_MMC_GET_IT(IT) (((IT) == ETH_MMC_IT_TGF) || ((IT) == ETH_MMC_IT_TGFMSC) || \
+                               ((IT) == ETH_MMC_IT_TGFSC) || ((IT) == ETH_MMC_IT_RGUF) || \
+                               ((IT) == ETH_MMC_IT_RFAE) || ((IT) == ETH_MMC_IT_RFCE))
+#define IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(CMD) (((CMD) == ETH_DMAENHANCEDDESCRIPTOR_ENABLE) || \
+                                                ((CMD) == ETH_DMAENHANCEDDESCRIPTOR_DISABLE))
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup ETH_Private_Defines
+  * @{
+  */
+/* Delay to wait when writing to some Ethernet registers */
+#define ETH_REG_WRITE_DELAY ((uint32_t)0x00000001)
+
+/* ETHERNET Errors */
+#define  ETH_SUCCESS            ((uint32_t)0)
+#define  ETH_ERROR              ((uint32_t)1)
+
+/* ETHERNET DMA Tx descriptors Collision Count Shift */
+#define  ETH_DMATXDESC_COLLISION_COUNTSHIFT         ((uint32_t)3)
+
+/* ETHERNET DMA Tx descriptors Buffer2 Size Shift */
+#define  ETH_DMATXDESC_BUFFER2_SIZESHIFT           ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Frame Length Shift */
+#define  ETH_DMARXDESC_FRAME_LENGTHSHIFT           ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Buffer2 Size Shift */
+#define  ETH_DMARXDESC_BUFFER2_SIZESHIFT           ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Frame length Shift */
+#define  ETH_DMARXDESC_FRAMELENGTHSHIFT            ((uint32_t)16)
+
+/* ETHERNET MAC address offsets */
+#define ETH_MAC_ADDR_HBASE    (uint32_t)(ETH_MAC_BASE + (uint32_t)0x40)  /* ETHERNET MAC address high offset */
+#define ETH_MAC_ADDR_LBASE    (uint32_t)(ETH_MAC_BASE + (uint32_t)0x44)  /* ETHERNET MAC address low offset */
+
+/* ETHERNET MACMIIAR register Mask */
+#define ETH_MACMIIAR_CR_MASK    ((uint32_t)0xFFFFFFE3)
+
+/* ETHERNET MACCR register Mask */
+#define ETH_MACCR_CLEAR_MASK    ((uint32_t)0xFF20810F)  
+
+/* ETHERNET MACFCR register Mask */
+#define ETH_MACFCR_CLEAR_MASK   ((uint32_t)0x0000FF41)
+
+/* ETHERNET DMAOMR register Mask */
+#define ETH_DMAOMR_CLEAR_MASK   ((uint32_t)0xF8DE3F23)
+
+/* ETHERNET Remote Wake-up frame register length */
+#define ETH_WAKEUP_REGISTER_LENGTH      8
+
+/* ETHERNET Missed frames counter Shift */
+#define  ETH_DMA_RX_OVERFLOW_MISSEDFRAMES_COUNTERSHIFT     17
+ /**
+  * @}
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup ETH_Exported_Types ETH Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  HAL State structures definition  
+  */ 
+typedef enum
+{
+  HAL_ETH_STATE_RESET             = 0x00,    /*!< Peripheral not yet Initialized or disabled         */
+  HAL_ETH_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use           */
+  HAL_ETH_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing                     */
+  HAL_ETH_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing               */
+  HAL_ETH_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing                  */
+  HAL_ETH_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission and Reception process is ongoing */
+  HAL_ETH_STATE_BUSY_WR           = 0x42,    /*!< Write process is ongoing                           */
+  HAL_ETH_STATE_BUSY_RD           = 0x82,    /*!< Read process is ongoing                            */
+  HAL_ETH_STATE_TIMEOUT           = 0x03,    /*!< Timeout state                                      */
+  HAL_ETH_STATE_ERROR             = 0x04     /*!< Reception process is ongoing                       */
+}HAL_ETH_StateTypeDef;
+
+/** 
+  * @brief  ETH Init Structure definition  
+  */
+
+typedef struct
+{
+  uint32_t             AutoNegotiation;           /*!< Selects or not the AutoNegotiation mode for the external PHY
+                                                           The AutoNegotiation allows an automatic setting of the Speed (10/100Mbps)
+                                                           and the mode (half/full-duplex).
+                                                           This parameter can be a value of @ref ETH_AutoNegotiation */
+
+  uint32_t             Speed;                     /*!< Sets the Ethernet speed: 10/100 Mbps.
+                                                           This parameter can be a value of @ref ETH_Speed */
+
+  uint32_t             DuplexMode;                /*!< Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode
+                                                           This parameter can be a value of @ref ETH_Duplex_Mode */
+  
+  uint16_t             PhyAddress;                /*!< Ethernet PHY address.
+                                                           This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+  
+  uint8_t             *MACAddr;                   /*!< MAC Address of used Hardware: must be pointer on an array of 6 bytes */
+  
+  uint32_t             RxMode;                    /*!< Selects the Ethernet Rx mode: Polling mode, Interrupt mode.
+                                                           This parameter can be a value of @ref ETH_Rx_Mode */
+  
+  uint32_t             ChecksumMode;              /*!< Selects if the checksum is check by hardware or by software. 
+                                                         This parameter can be a value of @ref ETH_Checksum_Mode */
+  
+  uint32_t             MediaInterface    ;               /*!< Selects the media-independent interface or the reduced media-independent interface. 
+                                                         This parameter can be a value of @ref ETH_Media_Interface */
+
+} ETH_InitTypeDef;
+
+
+ /** 
+  * @brief  ETH MAC Configuration Structure definition  
+  */
+
+typedef struct
+{
+  uint32_t             Watchdog;                  /*!< Selects or not the Watchdog timer
+                                                           When enabled, the MAC allows no more then 2048 bytes to be received.
+                                                           When disabled, the MAC can receive up to 16384 bytes.
+                                                           This parameter can be a value of @ref ETH_Watchdog */  
+
+  uint32_t             Jabber;                    /*!< Selects or not Jabber timer
+                                                           When enabled, the MAC allows no more then 2048 bytes to be sent.
+                                                           When disabled, the MAC can send up to 16384 bytes.
+                                                           This parameter can be a value of @ref ETH_Jabber */
+
+  uint32_t             InterFrameGap;             /*!< Selects the minimum IFG between frames during transmission.
+                                                           This parameter can be a value of @ref ETH_Inter_Frame_Gap */   
+
+  uint32_t             CarrierSense;              /*!< Selects or not the Carrier Sense.
+                                                           This parameter can be a value of @ref ETH_Carrier_Sense */
+
+  uint32_t             ReceiveOwn;                /*!< Selects or not the ReceiveOwn,
+                                                           ReceiveOwn allows the reception of frames when the TX_EN signal is asserted
+                                                           in Half-Duplex mode.
+                                                           This parameter can be a value of @ref ETH_Receive_Own */  
+
+  uint32_t             LoopbackMode;              /*!< Selects or not the internal MAC MII Loopback mode.
+                                                           This parameter can be a value of @ref ETH_Loop_Back_Mode */  
+
+  uint32_t             ChecksumOffload;           /*!< Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers.
+                                                           This parameter can be a value of @ref ETH_Checksum_Offload */    
+
+  uint32_t             RetryTransmission;         /*!< Selects or not the MAC attempt retries transmission, based on the settings of BL,
+                                                           when a collision occurs (Half-Duplex mode).
+                                                           This parameter can be a value of @ref ETH_Retry_Transmission */
+
+  uint32_t             AutomaticPadCRCStrip;      /*!< Selects or not the Automatic MAC Pad/CRC Stripping.
+                                                           This parameter can be a value of @ref ETH_Automatic_Pad_CRC_Strip */ 
+
+  uint32_t             BackOffLimit;              /*!< Selects the BackOff limit value.
+                                                           This parameter can be a value of @ref ETH_Back_Off_Limit */
+
+  uint32_t             DeferralCheck;             /*!< Selects or not the deferral check function (Half-Duplex mode).
+                                                           This parameter can be a value of @ref ETH_Deferral_Check */                                                                                                        
+
+  uint32_t             ReceiveAll;                /*!< Selects or not all frames reception by the MAC (No filtering).
+                                                           This parameter can be a value of @ref ETH_Receive_All */   
+
+  uint32_t             SourceAddrFilter;          /*!< Selects the Source Address Filter mode.                                                           
+                                                           This parameter can be a value of @ref ETH_Source_Addr_Filter */                  
+
+  uint32_t             PassControlFrames;         /*!< Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames)                                                          
+                                                           This parameter can be a value of @ref ETH_Pass_Control_Frames */ 
+
+  uint32_t             BroadcastFramesReception;  /*!< Selects or not the reception of Broadcast Frames.
+                                                           This parameter can be a value of @ref ETH_Broadcast_Frames_Reception */
+
+  uint32_t             DestinationAddrFilter;     /*!< Sets the destination filter mode for both unicast and multicast frames.
+                                                           This parameter can be a value of @ref ETH_Destination_Addr_Filter */ 
+
+  uint32_t             PromiscuousMode;           /*!< Selects or not the Promiscuous Mode
+                                                           This parameter can be a value of @ref ETH_Promiscuous_Mode */
+
+  uint32_t             MulticastFramesFilter;     /*!< Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+                                                           This parameter can be a value of @ref ETH_Multicast_Frames_Filter */ 
+
+  uint32_t             UnicastFramesFilter;       /*!< Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+                                                           This parameter can be a value of @ref ETH_Unicast_Frames_Filter */ 
+
+  uint32_t             HashTableHigh;             /*!< This field holds the higher 32 bits of Hash table.
+                                                           This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
+
+  uint32_t             HashTableLow;              /*!< This field holds the lower 32 bits of Hash table.
+                                                           This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF  */    
+
+  uint32_t             PauseTime;                 /*!< This field holds the value to be used in the Pause Time field in the transmit control frame. 
+                                                           This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFF */
+
+  uint32_t             ZeroQuantaPause;           /*!< Selects or not the automatic generation of Zero-Quanta Pause Control frames.
+                                                           This parameter can be a value of @ref ETH_Zero_Quanta_Pause */  
+
+  uint32_t             PauseLowThreshold;         /*!< This field configures the threshold of the PAUSE to be checked for
+                                                           automatic retransmission of PAUSE Frame.
+                                                           This parameter can be a value of @ref ETH_Pause_Low_Threshold */
+                                                           
+  uint32_t             UnicastPauseFrameDetect;   /*!< Selects or not the MAC detection of the Pause frames (with MAC Address0
+                                                           unicast address and unique multicast address).
+                                                           This parameter can be a value of @ref ETH_Unicast_Pause_Frame_Detect */  
+
+  uint32_t             ReceiveFlowControl;        /*!< Enables or disables the MAC to decode the received Pause frame and
+                                                           disable its transmitter for a specified time (Pause Time)
+                                                           This parameter can be a value of @ref ETH_Receive_Flow_Control */
+
+  uint32_t             TransmitFlowControl;       /*!< Enables or disables the MAC to transmit Pause frames (Full-Duplex mode)
+                                                           or the MAC back-pressure operation (Half-Duplex mode)
+                                                           This parameter can be a value of @ref ETH_Transmit_Flow_Control */     
+
+  uint32_t             VLANTagComparison;         /*!< Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for
+                                                           comparison and filtering.
+                                                           This parameter can be a value of @ref ETH_VLAN_Tag_Comparison */ 
+
+  uint32_t             VLANTagIdentifier;         /*!< Holds the VLAN tag identifier for receive frames */
+
+} ETH_MACInitTypeDef;
+
+
+/** 
+  * @brief  ETH DMA Configuration Structure definition  
+  */
+
+typedef struct
+{
+ uint32_t              DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames.
+                                                             This parameter can be a value of @ref ETH_Drop_TCP_IP_Checksum_Error_Frame */ 
+
+  uint32_t             ReceiveStoreForward;         /*!< Enables or disables the Receive store and forward mode.
+                                                             This parameter can be a value of @ref ETH_Receive_Store_Forward */ 
+
+  uint32_t             FlushReceivedFrame;          /*!< Enables or disables the flushing of received frames.
+                                                             This parameter can be a value of @ref ETH_Flush_Received_Frame */ 
+
+  uint32_t             TransmitStoreForward;        /*!< Enables or disables Transmit store and forward mode.
+                                                             This parameter can be a value of @ref ETH_Transmit_Store_Forward */ 
+
+  uint32_t             TransmitThresholdControl;    /*!< Selects or not the Transmit Threshold Control.
+                                                             This parameter can be a value of @ref ETH_Transmit_Threshold_Control */
+
+  uint32_t             ForwardErrorFrames;          /*!< Selects or not the forward to the DMA of erroneous frames.
+                                                             This parameter can be a value of @ref ETH_Forward_Error_Frames */
+
+  uint32_t             ForwardUndersizedGoodFrames; /*!< Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error
+                                                             and length less than 64 bytes) including pad-bytes and CRC)
+                                                             This parameter can be a value of @ref ETH_Forward_Undersized_Good_Frames */
+
+  uint32_t             ReceiveThresholdControl;     /*!< Selects the threshold level of the Receive FIFO.
+                                                             This parameter can be a value of @ref ETH_Receive_Threshold_Control */
+
+  uint32_t             SecondFrameOperate;          /*!< Selects or not the Operate on second frame mode, which allows the DMA to process a second
+                                                             frame of Transmit data even before obtaining the status for the first frame.
+                                                             This parameter can be a value of @ref ETH_Second_Frame_Operate */
+
+  uint32_t             AddressAlignedBeats;         /*!< Enables or disables the Address Aligned Beats.
+                                                             This parameter can be a value of @ref ETH_Address_Aligned_Beats */
+
+  uint32_t             FixedBurst;                  /*!< Enables or disables the AHB Master interface fixed burst transfers.
+                                                             This parameter can be a value of @ref ETH_Fixed_Burst */
+                       
+  uint32_t             RxDMABurstLength;            /*!< Indicates the maximum number of beats to be transferred in one Rx DMA transaction.
+                                                             This parameter can be a value of @ref ETH_Rx_DMA_Burst_Length */ 
+
+  uint32_t             TxDMABurstLength;            /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction.
+                                                             This parameter can be a value of @ref ETH_Tx_DMA_Burst_Length */
+  
+  uint32_t             EnhancedDescriptorFormat;    /*!< Enables the enhanced descriptor format.
+                                                             This parameter can be a value of @ref ETH_DMA_Enhanced_descriptor_format */
+
+  uint32_t             DescriptorSkipLength;        /*!< Specifies the number of word to skip between two unchained descriptors (Ring mode)
+                                                             This parameter must be a number between Min_Data = 0 and Max_Data = 32 */                                                             
+
+  uint32_t             DMAArbitration;              /*!< Selects the DMA Tx/Rx arbitration.
+                                                             This parameter can be a value of @ref ETH_DMA_Arbitration */  
+} ETH_DMAInitTypeDef;
+
+
+/** 
+  * @brief  ETH DMA Descriptors data structure definition
+  */ 
+
+typedef struct  
+{
+  __IO uint32_t   Status;           /*!< Status */
+  
+  uint32_t   ControlBufferSize;     /*!< Control and Buffer1, Buffer2 lengths */
+  
+  uint32_t   Buffer1Addr;           /*!< Buffer1 address pointer */
+  
+  uint32_t   Buffer2NextDescAddr;   /*!< Buffer2 or next descriptor address pointer */
+  
+  /*!< Enhanced ETHERNET DMA PTP Descriptors */
+  uint32_t   ExtendedStatus;        /*!< Extended status for PTP receive descriptor */
+  
+  uint32_t   Reserved1;             /*!< Reserved */
+  
+  uint32_t   TimeStampLow;          /*!< Time Stamp Low value for transmit and receive */
+  
+  uint32_t   TimeStampHigh;         /*!< Time Stamp High value for transmit and receive */
+
+} ETH_DMADescTypeDef;
+
+
+/** 
+  * @brief  Received Frame Informations structure definition
+  */ 
+typedef struct  
+{
+  ETH_DMADescTypeDef *FSRxDesc;          /*!< First Segment Rx Desc */
+  
+  ETH_DMADescTypeDef *LSRxDesc;          /*!< Last Segment Rx Desc */
+  
+  uint32_t  SegCount;                    /*!< Segment count */
+  
+  uint32_t length;                       /*!< Frame length */
+  
+  uint32_t buffer;                       /*!< Frame buffer */
+
+} ETH_DMARxFrameInfos;
+
+
+/** 
+  * @brief  ETH Handle Structure definition  
+  */
+  
+typedef struct
+{
+  ETH_TypeDef                *Instance;     /*!< Register base address       */
+  
+  ETH_InitTypeDef            Init;          /*!< Ethernet Init Configuration */
+  
+  uint32_t                   LinkStatus;    /*!< Ethernet link status        */
+  
+  ETH_DMADescTypeDef         *RxDesc;       /*!< Rx descriptor to Get        */
+  
+  ETH_DMADescTypeDef         *TxDesc;       /*!< Tx descriptor to Set        */
+  
+  ETH_DMARxFrameInfos        RxFrameInfos;  /*!< last Rx frame infos         */
+  
+  __IO HAL_ETH_StateTypeDef  State;         /*!< ETH communication state     */
+  
+  HAL_LockTypeDef            Lock;          /*!< ETH Lock                    */
+
+} ETH_HandleTypeDef;
+
+ /**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ETH_Exported_Constants ETH Exported Constants
+  * @{
+  */
+
+/** @defgroup ETH_Buffers_setting ETH Buffers setting
+  * @{
+  */ 
+#define ETH_MAX_PACKET_SIZE    ((uint32_t)1524)    /*!< ETH_HEADER + ETH_EXTRA + ETH_VLAN_TAG + ETH_MAX_ETH_PAYLOAD + ETH_CRC */
+#define ETH_HEADER               ((uint32_t)14)    /*!< 6 byte Dest addr, 6 byte Src addr, 2 byte length/type */
+#define ETH_CRC                   ((uint32_t)4)    /*!< Ethernet CRC */
+#define ETH_EXTRA                 ((uint32_t)2)    /*!< Extra bytes in some cases */   
+#define ETH_VLAN_TAG              ((uint32_t)4)    /*!< optional 802.1q VLAN Tag */
+#define ETH_MIN_ETH_PAYLOAD       ((uint32_t)46)    /*!< Minimum Ethernet payload size */
+#define ETH_MAX_ETH_PAYLOAD       ((uint32_t)1500)    /*!< Maximum Ethernet payload size */
+#define ETH_JUMBO_FRAME_PAYLOAD   ((uint32_t)9000)    /*!< Jumbo frame payload size */      
+
+ /* Ethernet driver receive buffers are organized in a chained linked-list, when
+    an ethernet packet is received, the Rx-DMA will transfer the packet from RxFIFO
+    to the driver receive buffers memory.
+
+    Depending on the size of the received ethernet packet and the size of 
+    each ethernet driver receive buffer, the received packet can take one or more
+    ethernet driver receive buffer. 
+
+    In below are defined the size of one ethernet driver receive buffer ETH_RX_BUF_SIZE 
+    and the total count of the driver receive buffers ETH_RXBUFNB.
+
+    The configured value for ETH_RX_BUF_SIZE and ETH_RXBUFNB are only provided as 
+    example, they can be reconfigured in the application layer to fit the application 
+    needs */ 
+
+/* Here we configure each Ethernet driver receive buffer to fit the Max size Ethernet
+   packet */
+#ifndef ETH_RX_BUF_SIZE
+ #define ETH_RX_BUF_SIZE         ETH_MAX_PACKET_SIZE 
+#endif
+
+/* 5 Ethernet driver receive buffers are used (in a chained linked list)*/ 
+#ifndef ETH_RXBUFNB
+ #define ETH_RXBUFNB             ((uint32_t)5     /*  5 Rx buffers of size ETH_RX_BUF_SIZE */
+#endif
+
+
+ /* Ethernet driver transmit buffers are organized in a chained linked-list, when
+    an ethernet packet is transmitted, Tx-DMA will transfer the packet from the 
+    driver transmit buffers memory to the TxFIFO.
+
+    Depending on the size of the Ethernet packet to be transmitted and the size of 
+    each ethernet driver transmit buffer, the packet to be transmitted can take 
+    one or more ethernet driver transmit buffer. 
+
+    In below are defined the size of one ethernet driver transmit buffer ETH_TX_BUF_SIZE 
+    and the total count of the driver transmit buffers ETH_TXBUFNB.
+
+    The configured value for ETH_TX_BUF_SIZE and ETH_TXBUFNB are only provided as 
+    example, they can be reconfigured in the application layer to fit the application 
+    needs */ 
+
+/* Here we configure each Ethernet driver transmit buffer to fit the Max size Ethernet
+   packet */
+#ifndef ETH_TX_BUF_SIZE 
+ #define ETH_TX_BUF_SIZE         ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 ethernet driver transmit buffers are used (in a chained linked list)*/ 
+#ifndef ETH_TXBUFNB
+ #define ETH_TXBUFNB             ((uint32_t)5      /* 5  Tx buffers of size ETH_TX_BUF_SIZE */
+#endif
+
+ /**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_TX_Descriptor ETH DMA TX Descriptor
+  * @{
+  */
+
+/*
+   DMA Tx Descriptor
+  -----------------------------------------------------------------------------------------------
+  TDES0 | OWN(31) | CTRL[30:26] | Reserved[25:24] | CTRL[23:20] | Reserved[19:17] | Status[16:0] |
+  -----------------------------------------------------------------------------------------------
+  TDES1 | Reserved[31:29] | Buffer2 ByteCount[28:16] | Reserved[15:13] | Buffer1 ByteCount[12:0] |
+  -----------------------------------------------------------------------------------------------
+  TDES2 |                         Buffer1 Address [31:0]                                         |
+  -----------------------------------------------------------------------------------------------
+  TDES3 |                   Buffer2 Address [31:0] / Next Descriptor Address [31:0]              |
+  -----------------------------------------------------------------------------------------------
+*/
+
+/** 
+  * @brief  Bit definition of TDES0 register: DMA Tx descriptor status register
+  */ 
+#define ETH_DMATXDESC_OWN                     ((uint32_t)0x80000000)  /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMATXDESC_IC                      ((uint32_t)0x40000000)  /*!< Interrupt on Completion */
+#define ETH_DMATXDESC_LS                      ((uint32_t)0x20000000)  /*!< Last Segment */
+#define ETH_DMATXDESC_FS                      ((uint32_t)0x10000000)  /*!< First Segment */
+#define ETH_DMATXDESC_DC                      ((uint32_t)0x08000000)  /*!< Disable CRC */
+#define ETH_DMATXDESC_DP                      ((uint32_t)0x04000000)  /*!< Disable Padding */
+#define ETH_DMATXDESC_TTSE                    ((uint32_t)0x02000000)  /*!< Transmit Time Stamp Enable */
+#define ETH_DMATXDESC_CIC                     ((uint32_t)0x00C00000)  /*!< Checksum Insertion Control: 4 cases */
+#define ETH_DMATXDESC_CIC_BYPASS              ((uint32_t)0x00000000)  /*!< Do Nothing: Checksum Engine is bypassed */ 
+#define ETH_DMATXDESC_CIC_IPV4HEADER          ((uint32_t)0x00400000)  /*!< IPV4 header Checksum Insertion */ 
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_SEGMENT  ((uint32_t)0x00800000)  /*!< TCP/UDP/ICMP Checksum Insertion calculated over segment only */ 
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_FULL     ((uint32_t)0x00C00000)  /*!< TCP/UDP/ICMP Checksum Insertion fully calculated */ 
+#define ETH_DMATXDESC_TER                     ((uint32_t)0x00200000)  /*!< Transmit End of Ring */
+#define ETH_DMATXDESC_TCH                     ((uint32_t)0x00100000)  /*!< Second Address Chained */
+#define ETH_DMATXDESC_TTSS                    ((uint32_t)0x00020000)  /*!< Tx Time Stamp Status */
+#define ETH_DMATXDESC_IHE                     ((uint32_t)0x00010000)  /*!< IP Header Error */
+#define ETH_DMATXDESC_ES                      ((uint32_t)0x00008000)  /*!< Error summary: OR of the following bits: UE || ED || EC || LCO || NC || LCA || FF || JT */
+#define ETH_DMATXDESC_JT                      ((uint32_t)0x00004000)  /*!< Jabber Timeout */
+#define ETH_DMATXDESC_FF                      ((uint32_t)0x00002000)  /*!< Frame Flushed: DMA/MTL flushed the frame due to SW flush */
+#define ETH_DMATXDESC_PCE                     ((uint32_t)0x00001000)  /*!< Payload Checksum Error */
+#define ETH_DMATXDESC_LCA                     ((uint32_t)0x00000800)  /*!< Loss of Carrier: carrier lost during transmission */
+#define ETH_DMATXDESC_NC                      ((uint32_t)0x00000400)  /*!< No Carrier: no carrier signal from the transceiver */
+#define ETH_DMATXDESC_LCO                     ((uint32_t)0x00000200)  /*!< Late Collision: transmission aborted due to collision */
+#define ETH_DMATXDESC_EC                      ((uint32_t)0x00000100)  /*!< Excessive Collision: transmission aborted after 16 collisions */
+#define ETH_DMATXDESC_VF                      ((uint32_t)0x00000080)  /*!< VLAN Frame */
+#define ETH_DMATXDESC_CC                      ((uint32_t)0x00000078)  /*!< Collision Count */
+#define ETH_DMATXDESC_ED                      ((uint32_t)0x00000004)  /*!< Excessive Deferral */
+#define ETH_DMATXDESC_UF                      ((uint32_t)0x00000002)  /*!< Underflow Error: late data arrival from the memory */
+#define ETH_DMATXDESC_DB                      ((uint32_t)0x00000001)  /*!< Deferred Bit */
+
+/** 
+  * @brief  Bit definition of TDES1 register
+  */ 
+#define ETH_DMATXDESC_TBS2  ((uint32_t)0x1FFF0000)  /*!< Transmit Buffer2 Size */
+#define ETH_DMATXDESC_TBS1  ((uint32_t)0x00001FFF)  /*!< Transmit Buffer1 Size */
+
+/** 
+  * @brief  Bit definition of TDES2 register
+  */ 
+#define ETH_DMATXDESC_B1AP  ((uint32_t)0xFFFFFFFF)  /*!< Buffer1 Address Pointer */
+
+/** 
+  * @brief  Bit definition of TDES3 register
+  */ 
+#define ETH_DMATXDESC_B2AP  ((uint32_t)0xFFFFFFFF)  /*!< Buffer2 Address Pointer */
+
+  /*---------------------------------------------------------------------------------------------
+  TDES6 |                         Transmit Time Stamp Low [31:0]                                 |
+  -----------------------------------------------------------------------------------------------
+  TDES7 |                         Transmit Time Stamp High [31:0]                                |
+  ----------------------------------------------------------------------------------------------*/
+
+/* Bit definition of TDES6 register */
+ #define ETH_DMAPTPTXDESC_TTSL  ((uint32_t)0xFFFFFFFF)  /* Transmit Time Stamp Low */
+
+/* Bit definition of TDES7 register */
+ #define ETH_DMAPTPTXDESC_TTSH  ((uint32_t)0xFFFFFFFF)  /* Transmit Time Stamp High */
+
+/**
+  * @}
+  */ 
+/** @defgroup ETH_DMA_RX_Descriptor ETH DMA RX Descriptor
+  * @{
+  */
+
+/*
+  DMA Rx Descriptor
+  --------------------------------------------------------------------------------------------------------------------
+  RDES0 | OWN(31) |                                             Status [30:0]                                          |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES1 | CTRL(31) | Reserved[30:29] | Buffer2 ByteCount[28:16] | CTRL[15:14] | Reserved(13) | Buffer1 ByteCount[12:0] |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES2 |                                       Buffer1 Address [31:0]                                                 |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES3 |                          Buffer2 Address [31:0] / Next Descriptor Address [31:0]                             |
+  ---------------------------------------------------------------------------------------------------------------------
+*/
+
+/** 
+  * @brief  Bit definition of RDES0 register: DMA Rx descriptor status register
+  */ 
+#define ETH_DMARXDESC_OWN         ((uint32_t)0x80000000)  /*!< OWN bit: descriptor is owned by DMA engine  */
+#define ETH_DMARXDESC_AFM         ((uint32_t)0x40000000)  /*!< DA Filter Fail for the rx frame  */
+#define ETH_DMARXDESC_FL          ((uint32_t)0x3FFF0000)  /*!< Receive descriptor frame length  */
+#define ETH_DMARXDESC_ES          ((uint32_t)0x00008000)  /*!< Error summary: OR of the following bits: DE || OE || IPC || LC || RWT || RE || CE */
+#define ETH_DMARXDESC_DE          ((uint32_t)0x00004000)  /*!< Descriptor error: no more descriptors for receive frame  */
+#define ETH_DMARXDESC_SAF         ((uint32_t)0x00002000)  /*!< SA Filter Fail for the received frame */
+#define ETH_DMARXDESC_LE          ((uint32_t)0x00001000)  /*!< Frame size not matching with length field */
+#define ETH_DMARXDESC_OE          ((uint32_t)0x00000800)  /*!< Overflow Error: Frame was damaged due to buffer overflow */
+#define ETH_DMARXDESC_VLAN        ((uint32_t)0x00000400)  /*!< VLAN Tag: received frame is a VLAN frame */
+#define ETH_DMARXDESC_FS          ((uint32_t)0x00000200)  /*!< First descriptor of the frame  */
+#define ETH_DMARXDESC_LS          ((uint32_t)0x00000100)  /*!< Last descriptor of the frame  */ 
+#define ETH_DMARXDESC_IPV4HCE     ((uint32_t)0x00000080)  /*!< IPC Checksum Error: Rx Ipv4 header checksum error   */    
+#define ETH_DMARXDESC_LC          ((uint32_t)0x00000040)  /*!< Late collision occurred during reception   */
+#define ETH_DMARXDESC_FT          ((uint32_t)0x00000020)  /*!< Frame type - Ethernet, otherwise 802.3    */
+#define ETH_DMARXDESC_RWT         ((uint32_t)0x00000010)  /*!< Receive Watchdog Timeout: watchdog timer expired during reception    */
+#define ETH_DMARXDESC_RE          ((uint32_t)0x00000008)  /*!< Receive error: error reported by MII interface  */
+#define ETH_DMARXDESC_DBE         ((uint32_t)0x00000004)  /*!< Dribble bit error: frame contains non int multiple of 8 bits  */
+#define ETH_DMARXDESC_CE          ((uint32_t)0x00000002)  /*!< CRC error */
+#define ETH_DMARXDESC_MAMPCE      ((uint32_t)0x00000001)  /*!< Rx MAC Address/Payload Checksum Error: Rx MAC address matched/ Rx Payload Checksum Error */
+
+/** 
+  * @brief  Bit definition of RDES1 register
+  */ 
+#define ETH_DMARXDESC_DIC   ((uint32_t)0x80000000)  /*!< Disable Interrupt on Completion */
+#define ETH_DMARXDESC_RBS2  ((uint32_t)0x1FFF0000)  /*!< Receive Buffer2 Size */
+#define ETH_DMARXDESC_RER   ((uint32_t)0x00008000)  /*!< Receive End of Ring */
+#define ETH_DMARXDESC_RCH   ((uint32_t)0x00004000)  /*!< Second Address Chained */
+#define ETH_DMARXDESC_RBS1  ((uint32_t)0x00001FFF)  /*!< Receive Buffer1 Size */
+
+/** 
+  * @brief  Bit definition of RDES2 register  
+  */ 
+#define ETH_DMARXDESC_B1AP  ((uint32_t)0xFFFFFFFF)  /*!< Buffer1 Address Pointer */
+
+/** 
+  * @brief  Bit definition of RDES3 register  
+  */ 
+#define ETH_DMARXDESC_B2AP  ((uint32_t)0xFFFFFFFF)  /*!< Buffer2 Address Pointer */
+
+/*---------------------------------------------------------------------------------------------------------------------
+  RDES4 |                   Reserved[31:15]              |             Extended Status [14:0]                          |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES5 |                                            Reserved[31:0]                                                    |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES6 |                                       Receive Time Stamp Low [31:0]                                          |
+  ---------------------------------------------------------------------------------------------------------------------
+  RDES7 |                                       Receive Time Stamp High [31:0]                                         |
+  --------------------------------------------------------------------------------------------------------------------*/
+
+/* Bit definition of RDES4 register */
+#define ETH_DMAPTPRXDESC_PTPV     ((uint32_t)0x00002000)  /* PTP Version */
+#define ETH_DMAPTPRXDESC_PTPFT    ((uint32_t)0x00001000)  /* PTP Frame Type */
+#define ETH_DMAPTPRXDESC_PTPMT    ((uint32_t)0x00000F00)  /* PTP Message Type */
+  #define ETH_DMAPTPRXDESC_PTPMT_SYNC                      ((uint32_t)0x00000100)  /* SYNC message (all clock types) */
+  #define ETH_DMAPTPRXDESC_PTPMT_FOLLOWUP                  ((uint32_t)0x00000200)  /* FollowUp message (all clock types) */ 
+  #define ETH_DMAPTPRXDESC_PTPMT_DELAYREQ                  ((uint32_t)0x00000300)  /* DelayReq message (all clock types) */ 
+  #define ETH_DMAPTPRXDESC_PTPMT_DELAYRESP                 ((uint32_t)0x00000400)  /* DelayResp message (all clock types) */ 
+  #define ETH_DMAPTPRXDESC_PTPMT_PDELAYREQ_ANNOUNCE        ((uint32_t)0x00000500)  /* PdelayReq message (peer-to-peer transparent clock) or Announce message (Ordinary or Boundary clock) */ 
+  #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESP_MANAG          ((uint32_t)0x00000600)  /* PdelayResp message (peer-to-peer transparent clock) or Management message (Ordinary or Boundary clock)  */ 
+  #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESPFOLLOWUP_SIGNAL ((uint32_t)0x00000700)  /* PdelayRespFollowUp message (peer-to-peer transparent clock) or Signaling message (Ordinary or Boundary clock) */           
+#define ETH_DMAPTPRXDESC_IPV6PR   ((uint32_t)0x00000080)  /* IPv6 Packet Received */
+#define ETH_DMAPTPRXDESC_IPV4PR   ((uint32_t)0x00000040)  /* IPv4 Packet Received */
+#define ETH_DMAPTPRXDESC_IPCB  ((uint32_t)0x00000020)  /* IP Checksum Bypassed */
+#define ETH_DMAPTPRXDESC_IPPE  ((uint32_t)0x00000010)  /* IP Payload Error */
+#define ETH_DMAPTPRXDESC_IPHE  ((uint32_t)0x00000008)  /* IP Header Error */
+#define ETH_DMAPTPRXDESC_IPPT  ((uint32_t)0x00000007)  /* IP Payload Type */
+  #define ETH_DMAPTPRXDESC_IPPT_UDP                 ((uint32_t)0x00000001)  /* UDP payload encapsulated in the IP datagram */
+  #define ETH_DMAPTPRXDESC_IPPT_TCP                 ((uint32_t)0x00000002)  /* TCP payload encapsulated in the IP datagram */ 
+  #define ETH_DMAPTPRXDESC_IPPT_ICMP                ((uint32_t)0x00000003)  /* ICMP payload encapsulated in the IP datagram */
+
+/* Bit definition of RDES6 register */
+#define ETH_DMAPTPRXDESC_RTSL  ((uint32_t)0xFFFFFFFF)  /* Receive Time Stamp Low */
+
+/* Bit definition of RDES7 register */
+#define ETH_DMAPTPRXDESC_RTSH  ((uint32_t)0xFFFFFFFF)  /* Receive Time Stamp High */
+/**
+  * @}
+  */
+ /** @defgroup ETH_AutoNegotiation ETH AutoNegotiation 
+  * @{
+  */ 
+#define ETH_AUTONEGOTIATION_ENABLE     ((uint32_t)0x00000001)
+#define ETH_AUTONEGOTIATION_DISABLE    ((uint32_t)0x00000000)
+
+/**
+  * @}
+  */
+/** @defgroup ETH_Speed ETH Speed 
+  * @{
+  */ 
+#define ETH_SPEED_10M        ((uint32_t)0x00000000)
+#define ETH_SPEED_100M       ((uint32_t)0x00004000)
+
+/**
+  * @}
+  */
+/** @defgroup ETH_Duplex_Mode ETH Duplex Mode
+  * @{
+  */ 
+#define ETH_MODE_FULLDUPLEX       ((uint32_t)0x00000800)
+#define ETH_MODE_HALFDUPLEX       ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+/** @defgroup ETH_Rx_Mode ETH Rx Mode
+  * @{
+  */ 
+#define ETH_RXPOLLING_MODE      ((uint32_t)0x00000000)
+#define ETH_RXINTERRUPT_MODE    ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Checksum_Mode ETH Checksum Mode
+  * @{
+  */ 
+#define ETH_CHECKSUM_BY_HARDWARE      ((uint32_t)0x00000000)
+#define ETH_CHECKSUM_BY_SOFTWARE      ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Media_Interface ETH Media Interface
+  * @{
+  */ 
+#define ETH_MEDIA_INTERFACE_MII       ((uint32_t)0x00000000)
+#define ETH_MEDIA_INTERFACE_RMII      ((uint32_t)SYSCFG_PMC_MII_RMII_SEL)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Watchdog ETH Watchdog 
+  * @{
+  */ 
+#define ETH_WATCHDOG_ENABLE       ((uint32_t)0x00000000)
+#define ETH_WATCHDOG_DISABLE      ((uint32_t)0x00800000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Jabber ETH Jabber
+  * @{
+  */ 
+#define ETH_JABBER_ENABLE    ((uint32_t)0x00000000)
+#define ETH_JABBER_DISABLE   ((uint32_t)0x00400000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Inter_Frame_Gap ETH Inter Frame Gap 
+  * @{
+  */ 
+#define ETH_INTERFRAMEGAP_96BIT   ((uint32_t)0x00000000)  /*!< minimum IFG between frames during transmission is 96Bit */
+#define ETH_INTERFRAMEGAP_88BIT   ((uint32_t)0x00020000)  /*!< minimum IFG between frames during transmission is 88Bit */
+#define ETH_INTERFRAMEGAP_80BIT   ((uint32_t)0x00040000)  /*!< minimum IFG between frames during transmission is 80Bit */
+#define ETH_INTERFRAMEGAP_72BIT   ((uint32_t)0x00060000)  /*!< minimum IFG between frames during transmission is 72Bit */
+#define ETH_INTERFRAMEGAP_64BIT   ((uint32_t)0x00080000)  /*!< minimum IFG between frames during transmission is 64Bit */
+#define ETH_INTERFRAMEGAP_56BIT   ((uint32_t)0x000A0000)  /*!< minimum IFG between frames during transmission is 56Bit */
+#define ETH_INTERFRAMEGAP_48BIT   ((uint32_t)0x000C0000)  /*!< minimum IFG between frames during transmission is 48Bit */
+#define ETH_INTERFRAMEGAP_40BIT   ((uint32_t)0x000E0000)  /*!< minimum IFG between frames during transmission is 40Bit */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Carrier_Sense ETH Carrier Sense
+  * @{
+  */ 
+#define ETH_CARRIERSENCE_ENABLE   ((uint32_t)0x00000000)
+#define ETH_CARRIERSENCE_DISABLE  ((uint32_t)0x00010000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_Own ETH Receive Own 
+  * @{
+  */ 
+#define ETH_RECEIVEOWN_ENABLE     ((uint32_t)0x00000000)
+#define ETH_RECEIVEOWN_DISABLE    ((uint32_t)0x00002000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Loop_Back_Mode ETH Loop Back Mode 
+  * @{
+  */ 
+#define ETH_LOOPBACKMODE_ENABLE        ((uint32_t)0x00001000)
+#define ETH_LOOPBACKMODE_DISABLE       ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Checksum_Offload ETH Checksum Offload
+  * @{
+  */ 
+#define ETH_CHECKSUMOFFLAOD_ENABLE     ((uint32_t)0x00000400)
+#define ETH_CHECKSUMOFFLAOD_DISABLE    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Retry_Transmission ETH Retry Transmission
+  * @{
+  */ 
+#define ETH_RETRYTRANSMISSION_ENABLE   ((uint32_t)0x00000000)
+#define ETH_RETRYTRANSMISSION_DISABLE  ((uint32_t)0x00000200)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Automatic_Pad_CRC_Strip ETH Automatic Pad CRC Strip
+  * @{
+  */ 
+#define ETH_AUTOMATICPADCRCSTRIP_ENABLE     ((uint32_t)0x00000080)
+#define ETH_AUTOMATICPADCRCSTRIP_DISABLE    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Back_Off_Limit ETH Back Off Limit
+  * @{
+  */ 
+#define ETH_BACKOFFLIMIT_10  ((uint32_t)0x00000000)
+#define ETH_BACKOFFLIMIT_8   ((uint32_t)0x00000020)
+#define ETH_BACKOFFLIMIT_4   ((uint32_t)0x00000040)
+#define ETH_BACKOFFLIMIT_1   ((uint32_t)0x00000060)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Deferral_Check ETH Deferral Check
+  * @{
+  */
+#define ETH_DEFFERRALCHECK_ENABLE       ((uint32_t)0x00000010)
+#define ETH_DEFFERRALCHECK_DISABLE      ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_All ETH Receive All
+  * @{
+  */ 
+#define ETH_RECEIVEALL_ENABLE     ((uint32_t)0x80000000)
+#define ETH_RECEIVEAll_DISABLE    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Source_Addr_Filter ETH Source Addr Filter
+  * @{
+  */ 
+#define ETH_SOURCEADDRFILTER_NORMAL_ENABLE       ((uint32_t)0x00000200)
+#define ETH_SOURCEADDRFILTER_INVERSE_ENABLE      ((uint32_t)0x00000300)
+#define ETH_SOURCEADDRFILTER_DISABLE             ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Pass_Control_Frames ETH Pass Control Frames
+  * @{
+  */ 
+#define ETH_PASSCONTROLFRAMES_BLOCKALL                ((uint32_t)0x00000040)  /*!< MAC filters all control frames from reaching the application */
+#define ETH_PASSCONTROLFRAMES_FORWARDALL              ((uint32_t)0x00000080)  /*!< MAC forwards all control frames to application even if they fail the Address Filter */
+#define ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER ((uint32_t)0x000000C0)  /*!< MAC forwards control frames that pass the Address Filter. */ 
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Broadcast_Frames_Reception ETH Broadcast Frames Reception
+  * @{
+  */ 
+#define ETH_BROADCASTFRAMESRECEPTION_ENABLE     ((uint32_t)0x00000000)
+#define ETH_BROADCASTFRAMESRECEPTION_DISABLE    ((uint32_t)0x00000020)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Destination_Addr_Filter ETH Destination Addr Filter
+  * @{
+  */ 
+#define ETH_DESTINATIONADDRFILTER_NORMAL    ((uint32_t)0x00000000)
+#define ETH_DESTINATIONADDRFILTER_INVERSE   ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Promiscuous_Mode ETH Promiscuous Mode
+  * @{
+  */ 
+#define ETH_PROMISCUOUS_MODE_ENABLE     ((uint32_t)0x00000001)
+#define ETH_PROMISCUOUS_MODE_DISABLE    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Multicast_Frames_Filter ETH Multicast Frames Filter
+  * @{
+  */ 
+#define ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE    ((uint32_t)0x00000404)
+#define ETH_MULTICASTFRAMESFILTER_HASHTABLE           ((uint32_t)0x00000004)
+#define ETH_MULTICASTFRAMESFILTER_PERFECT             ((uint32_t)0x00000000)
+#define ETH_MULTICASTFRAMESFILTER_NONE                ((uint32_t)0x00000010)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Unicast_Frames_Filter ETH Unicast Frames Filter
+  * @{
+  */ 
+#define ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000402)
+#define ETH_UNICASTFRAMESFILTER_HASHTABLE        ((uint32_t)0x00000002)
+#define ETH_UNICASTFRAMESFILTER_PERFECT          ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Zero_Quanta_Pause ETH Zero Quanta Pause 
+  * @{
+  */ 
+#define ETH_ZEROQUANTAPAUSE_ENABLE     ((uint32_t)0x00000000)
+#define ETH_ZEROQUANTAPAUSE_DISABLE    ((uint32_t)0x00000080)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Pause_Low_Threshold ETH Pause Low Threshold
+  * @{
+  */ 
+#define ETH_PAUSELOWTHRESHOLD_MINUS4        ((uint32_t)0x00000000)  /*!< Pause time minus 4 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS28       ((uint32_t)0x00000010)  /*!< Pause time minus 28 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS144      ((uint32_t)0x00000020)  /*!< Pause time minus 144 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS256      ((uint32_t)0x00000030)  /*!< Pause time minus 256 slot times */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Unicast_Pause_Frame_Detect ETH Unicast Pause Frame Detect
+  * @{
+  */ 
+#define ETH_UNICASTPAUSEFRAMEDETECT_ENABLE  ((uint32_t)0x00000008)
+#define ETH_UNICASTPAUSEFRAMEDETECT_DISABLE ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_Flow_Control ETH Receive Flow Control
+  * @{
+  */ 
+#define ETH_RECEIVEFLOWCONTROL_ENABLE       ((uint32_t)0x00000004)
+#define ETH_RECEIVEFLOWCONTROL_DISABLE      ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Transmit_Flow_Control ETH Transmit Flow Control
+  * @{
+  */ 
+#define ETH_TRANSMITFLOWCONTROL_ENABLE      ((uint32_t)0x00000002)
+#define ETH_TRANSMITFLOWCONTROL_DISABLE     ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_VLAN_Tag_Comparison ETH VLAN Tag Comparison
+  * @{
+  */ 
+#define ETH_VLANTAGCOMPARISON_12BIT    ((uint32_t)0x00010000)
+#define ETH_VLANTAGCOMPARISON_16BIT    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_addresses ETH MAC addresses
+  * @{
+  */ 
+#define ETH_MAC_ADDRESS0     ((uint32_t)0x00000000)
+#define ETH_MAC_ADDRESS1     ((uint32_t)0x00000008)
+#define ETH_MAC_ADDRESS2     ((uint32_t)0x00000010)
+#define ETH_MAC_ADDRESS3     ((uint32_t)0x00000018)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_addresses_filter_SA_DA ETH MAC addresses filter SA DA 
+  * @{
+  */ 
+#define ETH_MAC_ADDRESSFILTER_SA       ((uint32_t)0x00000000)
+#define ETH_MAC_ADDRESSFILTER_DA       ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_addresses_filter_Mask_bytes ETH MAC addresses filter Mask bytes
+  * @{
+  */ 
+#define ETH_MAC_ADDRESSMASK_BYTE6      ((uint32_t)0x20000000)  /*!< Mask MAC Address high reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE5      ((uint32_t)0x10000000)  /*!< Mask MAC Address high reg bits [7:0] */
+#define ETH_MAC_ADDRESSMASK_BYTE4      ((uint32_t)0x08000000)  /*!< Mask MAC Address low reg bits [31:24] */
+#define ETH_MAC_ADDRESSMASK_BYTE3      ((uint32_t)0x04000000)  /*!< Mask MAC Address low reg bits [23:16] */
+#define ETH_MAC_ADDRESSMASK_BYTE2      ((uint32_t)0x02000000)  /*!< Mask MAC Address low reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE1      ((uint32_t)0x01000000)  /*!< Mask MAC Address low reg bits [70] */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_Debug_flags ETH MAC Debug flags
+  * @{
+  */ 
+#define ETH_MAC_TXFIFO_FULL          ((uint32_t)0x02000000)  /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY      ((uint32_t)0x01000000)  /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE  ((uint32_t)0x00400000)  /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE     ((uint32_t)0x00000000)  /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ     ((uint32_t)0x00100000)  /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING  ((uint32_t)0x00200000)  /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING  ((uint32_t)0x00300000)  /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE     ((uint32_t)0x00080000)  /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE            ((uint32_t)0x00000000)  /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING         ((uint32_t)0x00020000)  /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF   ((uint32_t)0x00040000)  /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING    ((uint32_t)0x00060000)  /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_MII_TRANSMIT_ACTIVE      ((uint32_t)0x00010000)  /* MAC MII transmit engine active */
+#define ETH_MAC_RXFIFO_EMPTY             ((uint32_t)0x00000000)  /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD   ((uint32_t)0x00000100)  /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD   ((uint32_t)0x00000200)  /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL              ((uint32_t)0x00000300)  /* Rx FIFO fill level: full */
+#define ETH_MAC_READCONTROLLER_IDLE            ((uint32_t)0x00000000)  /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA    ((uint32_t)0x00000020)  /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS  ((uint32_t)0x00000040)  /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#define ETH_MAC_READCONTROLLER_FLUSHING       ((uint32_t)0x00000060)  /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE     ((uint32_t)0x00000010)  /* Rx FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE    ((uint32_t)0x00000000)  /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE  ((uint32_t)0x00000002)  /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE ((uint32_t)0x00000004)  /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE    ((uint32_t)0x00000006)  /* MAC small FIFO read / write controllers active */
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE   ((uint32_t)0x00000001)  /* MAC MII receive protocol engine active */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Drop_TCP_IP_Checksum_Error_Frame ETH Drop TCP IP Checksum Error Frame
+  * @{
+  */ 
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE   ((uint32_t)0x00000000)
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE  ((uint32_t)0x04000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_Store_Forward ETH Receive Store Forward
+  * @{
+  */ 
+#define ETH_RECEIVESTOREFORWARD_ENABLE      ((uint32_t)0x02000000)
+#define ETH_RECEIVESTOREFORWARD_DISABLE     ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Flush_Received_Frame ETH Flush Received Frame
+  * @{
+  */ 
+#define ETH_FLUSHRECEIVEDFRAME_ENABLE       ((uint32_t)0x00000000)
+#define ETH_FLUSHRECEIVEDFRAME_DISABLE      ((uint32_t)0x01000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Transmit_Store_Forward ETH Transmit Store Forward
+  * @{
+  */ 
+#define ETH_TRANSMITSTOREFORWARD_ENABLE     ((uint32_t)0x00200000)
+#define ETH_TRANSMITSTOREFORWARD_DISABLE    ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Transmit_Threshold_Control ETH Transmit Threshold Control
+  * @{
+  */ 
+#define ETH_TRANSMITTHRESHOLDCONTROL_64BYTES     ((uint32_t)0x00000000)  /*!< threshold level of the MTL Transmit FIFO is 64 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_128BYTES    ((uint32_t)0x00004000)  /*!< threshold level of the MTL Transmit FIFO is 128 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_192BYTES    ((uint32_t)0x00008000)  /*!< threshold level of the MTL Transmit FIFO is 192 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_256BYTES    ((uint32_t)0x0000C000)  /*!< threshold level of the MTL Transmit FIFO is 256 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_40BYTES     ((uint32_t)0x00010000)  /*!< threshold level of the MTL Transmit FIFO is 40 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_32BYTES     ((uint32_t)0x00014000)  /*!< threshold level of the MTL Transmit FIFO is 32 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_24BYTES     ((uint32_t)0x00018000)  /*!< threshold level of the MTL Transmit FIFO is 24 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_16BYTES     ((uint32_t)0x0001C000)  /*!< threshold level of the MTL Transmit FIFO is 16 Bytes */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Forward_Error_Frames ETH Forward Error Frames
+  * @{
+  */ 
+#define ETH_FORWARDERRORFRAMES_ENABLE       ((uint32_t)0x00000080)
+#define ETH_FORWARDERRORFRAMES_DISABLE      ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Forward_Undersized_Good_Frames ETH Forward Undersized Good Frames
+  * @{
+  */ 
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE   ((uint32_t)0x00000040)
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE  ((uint32_t)0x00000000)     
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Receive_Threshold_Control ETH Receive Threshold Control
+  * @{
+  */ 
+#define ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES      ((uint32_t)0x00000000)  /*!< threshold level of the MTL Receive FIFO is 64 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES      ((uint32_t)0x00000008)  /*!< threshold level of the MTL Receive FIFO is 32 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES      ((uint32_t)0x00000010)  /*!< threshold level of the MTL Receive FIFO is 96 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES     ((uint32_t)0x00000018)  /*!< threshold level of the MTL Receive FIFO is 128 Bytes */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Second_Frame_Operate ETH Second Frame Operate
+  * @{
+  */ 
+#define ETH_SECONDFRAMEOPERARTE_ENABLE       ((uint32_t)0x00000004)
+#define ETH_SECONDFRAMEOPERARTE_DISABLE      ((uint32_t)0x00000000)  
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Address_Aligned_Beats ETH Address Aligned Beats 
+  * @{
+  */ 
+#define ETH_ADDRESSALIGNEDBEATS_ENABLE      ((uint32_t)0x02000000)
+#define ETH_ADDRESSALIGNEDBEATS_DISABLE     ((uint32_t)0x00000000) 
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Fixed_Burst ETH Fixed Burst
+  * @{
+  */ 
+#define ETH_FIXEDBURST_ENABLE     ((uint32_t)0x00010000)
+#define ETH_FIXEDBURST_DISABLE    ((uint32_t)0x00000000) 
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Rx_DMA_Burst_Length ETH Rx DMA Burst Length
+  * @{
+  */ 
+#define ETH_RXDMABURSTLENGTH_1BEAT          ((uint32_t)0x00020000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 1 */
+#define ETH_RXDMABURSTLENGTH_2BEAT          ((uint32_t)0x00040000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 2 */
+#define ETH_RXDMABURSTLENGTH_4BEAT          ((uint32_t)0x00080000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_8BEAT          ((uint32_t)0x00100000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_16BEAT         ((uint32_t)0x00200000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_32BEAT         ((uint32_t)0x00400000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */                
+#define ETH_RXDMABURSTLENGTH_4XPBL_4BEAT    ((uint32_t)0x01020000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_8BEAT    ((uint32_t)0x01040000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_16BEAT   ((uint32_t)0x01080000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_32BEAT   ((uint32_t)0x01100000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_64BEAT   ((uint32_t)0x01200000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 64 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_128BEAT  ((uint32_t)0x01400000)  /*!< maximum number of beats to be transferred in one RxDMA transaction is 128 */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_Tx_DMA_Burst_Length ETH Tx DMA Burst Length
+  * @{
+  */ 
+#define ETH_TXDMABURSTLENGTH_1BEAT          ((uint32_t)0x00000100)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+#define ETH_TXDMABURSTLENGTH_2BEAT          ((uint32_t)0x00000200)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+#define ETH_TXDMABURSTLENGTH_4BEAT          ((uint32_t)0x00000400)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_8BEAT          ((uint32_t)0x00000800)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_16BEAT         ((uint32_t)0x00001000)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_32BEAT         ((uint32_t)0x00002000)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */                
+#define ETH_TXDMABURSTLENGTH_4XPBL_4BEAT    ((uint32_t)0x01000100)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_8BEAT    ((uint32_t)0x01000200)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_16BEAT   ((uint32_t)0x01000400)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_32BEAT   ((uint32_t)0x01000800)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_64BEAT   ((uint32_t)0x01001000)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_128BEAT  ((uint32_t)0x01002000)  /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Enhanced_descriptor_format ETH DMA Enhanced descriptor format
+  * @{
+  */  
+#define ETH_DMAENHANCEDDESCRIPTOR_ENABLE              ((uint32_t)0x00000080)
+#define ETH_DMAENHANCEDDESCRIPTOR_DISABLE             ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Arbitration ETH DMA Arbitration
+  * @{
+  */ 
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1   ((uint32_t)0x00000000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1   ((uint32_t)0x00004000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1   ((uint32_t)0x00008000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1   ((uint32_t)0x0000C000)
+#define ETH_DMAARBITRATION_RXPRIORTX             ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Tx_descriptor_segment ETH DMA Tx descriptor segment
+  * @{
+  */ 
+#define ETH_DMATXDESC_LASTSEGMENTS      ((uint32_t)0x40000000)  /*!< Last Segment */
+#define ETH_DMATXDESC_FIRSTSEGMENT      ((uint32_t)0x20000000)  /*!< First Segment */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Tx_descriptor_Checksum_Insertion_Control ETH DMA Tx descriptor Checksum Insertion Control
+  * @{
+  */ 
+#define ETH_DMATXDESC_CHECKSUMBYPASS             ((uint32_t)0x00000000)   /*!< Checksum engine bypass */
+#define ETH_DMATXDESC_CHECKSUMIPV4HEADER         ((uint32_t)0x00400000)   /*!< IPv4 header checksum insertion  */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT  ((uint32_t)0x00800000)   /*!< TCP/UDP/ICMP checksum insertion. Pseudo header checksum is assumed to be present */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL     ((uint32_t)0x00C00000)   /*!< TCP/UDP/ICMP checksum fully in hardware including pseudo header */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Rx_descriptor_buffers ETH DMA Rx descriptor buffers 
+  * @{
+  */ 
+#define ETH_DMARXDESC_BUFFER1     ((uint32_t)0x00000000)  /*!< DMA Rx Desc Buffer1 */
+#define ETH_DMARXDESC_BUFFER2     ((uint32_t)0x00000001)  /*!< DMA Rx Desc Buffer2 */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_PMT_Flags ETH PMT Flags
+  * @{
+  */ 
+#define ETH_PMT_FLAG_WUFFRPR      ((uint32_t)0x80000000)  /*!< Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_PMT_FLAG_WUFR         ((uint32_t)0x00000040)  /*!< Wake-Up Frame Received */
+#define ETH_PMT_FLAG_MPR          ((uint32_t)0x00000020)  /*!< Magic Packet Received */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MMC_Tx_Interrupts ETH MMC Tx Interrupts
+  * @{
+  */ 
+#define ETH_MMC_IT_TGF       ((uint32_t)0x00200000)  /*!< When Tx good frame counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFMSC    ((uint32_t)0x00008000)  /*!< When Tx good multi col counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFSC     ((uint32_t)0x00004000)  /*!< When Tx good single col counter reaches half the maximum value */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MMC_Rx_Interrupts ETH MMC Rx Interrupts
+  * @{
+  */
+#define ETH_MMC_IT_RGUF      ((uint32_t)0x10020000)  /*!< When Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMC_IT_RFAE      ((uint32_t)0x10000040)  /*!< When Rx alignment error counter reaches half the maximum value */
+#define ETH_MMC_IT_RFCE      ((uint32_t)0x10000020)  /*!< When Rx crc error counter reaches half the maximum value */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_Flags ETH MAC Flags
+  * @{
+  */ 
+#define ETH_MAC_FLAG_TST     ((uint32_t)0x00000200)  /*!< Time stamp trigger flag (on MAC) */
+#define ETH_MAC_FLAG_MMCT    ((uint32_t)0x00000040)  /*!< MMC transmit flag  */
+#define ETH_MAC_FLAG_MMCR    ((uint32_t)0x00000020)  /*!< MMC receive flag */
+#define ETH_MAC_FLAG_MMC     ((uint32_t)0x00000010)  /*!< MMC flag (on MAC) */
+#define ETH_MAC_FLAG_PMT     ((uint32_t)0x00000008)  /*!< PMT flag (on MAC) */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Flags ETH DMA Flags
+  * @{
+  */ 
+#define ETH_DMA_FLAG_TST               ((uint32_t)0x20000000)  /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_FLAG_PMT               ((uint32_t)0x10000000)  /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_FLAG_MMC               ((uint32_t)0x08000000)  /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_FLAG_DATATRANSFERERROR ((uint32_t)0x00800000)  /*!< Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMA_FLAG_READWRITEERROR    ((uint32_t)0x01000000)  /*!< Error bits 0-write transfer, 1-read transfer */
+#define ETH_DMA_FLAG_ACCESSERROR       ((uint32_t)0x02000000)  /*!< Error bits 0-data buffer, 1-desc. access */
+#define ETH_DMA_FLAG_NIS               ((uint32_t)0x00010000)  /*!< Normal interrupt summary flag */
+#define ETH_DMA_FLAG_AIS               ((uint32_t)0x00008000)  /*!< Abnormal interrupt summary flag */
+#define ETH_DMA_FLAG_ER                ((uint32_t)0x00004000)  /*!< Early receive flag */
+#define ETH_DMA_FLAG_FBE               ((uint32_t)0x00002000)  /*!< Fatal bus error flag */
+#define ETH_DMA_FLAG_ET                ((uint32_t)0x00000400)  /*!< Early transmit flag */
+#define ETH_DMA_FLAG_RWT               ((uint32_t)0x00000200)  /*!< Receive watchdog timeout flag */
+#define ETH_DMA_FLAG_RPS               ((uint32_t)0x00000100)  /*!< Receive process stopped flag */
+#define ETH_DMA_FLAG_RBU               ((uint32_t)0x00000080)  /*!< Receive buffer unavailable flag */
+#define ETH_DMA_FLAG_R                 ((uint32_t)0x00000040)  /*!< Receive flag */
+#define ETH_DMA_FLAG_TU                ((uint32_t)0x00000020)  /*!< Underflow flag */
+#define ETH_DMA_FLAG_RO                ((uint32_t)0x00000010)  /*!< Overflow flag */
+#define ETH_DMA_FLAG_TJT               ((uint32_t)0x00000008)  /*!< Transmit jabber timeout flag */
+#define ETH_DMA_FLAG_TBU               ((uint32_t)0x00000004)  /*!< Transmit buffer unavailable flag */
+#define ETH_DMA_FLAG_TPS               ((uint32_t)0x00000002)  /*!< Transmit process stopped flag */
+#define ETH_DMA_FLAG_T                 ((uint32_t)0x00000001)  /*!< Transmit flag */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_MAC_Interrupts ETH MAC Interrupts 
+  * @{
+  */ 
+#define ETH_MAC_IT_TST       ((uint32_t)0x00000200)  /*!< Time stamp trigger interrupt (on MAC) */
+#define ETH_MAC_IT_MMCT      ((uint32_t)0x00000040)  /*!< MMC transmit interrupt */
+#define ETH_MAC_IT_MMCR      ((uint32_t)0x00000020)  /*!< MMC receive interrupt */
+#define ETH_MAC_IT_MMC       ((uint32_t)0x00000010)  /*!< MMC interrupt (on MAC) */
+#define ETH_MAC_IT_PMT       ((uint32_t)0x00000008)  /*!< PMT interrupt (on MAC) */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_Interrupts ETH DMA Interrupts 
+  * @{
+  */ 
+#define ETH_DMA_IT_TST       ((uint32_t)0x20000000)  /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_IT_PMT       ((uint32_t)0x10000000)  /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_IT_MMC       ((uint32_t)0x08000000)  /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_IT_NIS       ((uint32_t)0x00010000)  /*!< Normal interrupt summary */
+#define ETH_DMA_IT_AIS       ((uint32_t)0x00008000)  /*!< Abnormal interrupt summary */
+#define ETH_DMA_IT_ER        ((uint32_t)0x00004000)  /*!< Early receive interrupt */
+#define ETH_DMA_IT_FBE       ((uint32_t)0x00002000)  /*!< Fatal bus error interrupt */
+#define ETH_DMA_IT_ET        ((uint32_t)0x00000400)  /*!< Early transmit interrupt */
+#define ETH_DMA_IT_RWT       ((uint32_t)0x00000200)  /*!< Receive watchdog timeout interrupt */
+#define ETH_DMA_IT_RPS       ((uint32_t)0x00000100)  /*!< Receive process stopped interrupt */
+#define ETH_DMA_IT_RBU       ((uint32_t)0x00000080)  /*!< Receive buffer unavailable interrupt */
+#define ETH_DMA_IT_R         ((uint32_t)0x00000040)  /*!< Receive interrupt */
+#define ETH_DMA_IT_TU        ((uint32_t)0x00000020)  /*!< Underflow interrupt */
+#define ETH_DMA_IT_RO        ((uint32_t)0x00000010)  /*!< Overflow interrupt */
+#define ETH_DMA_IT_TJT       ((uint32_t)0x00000008)  /*!< Transmit jabber timeout interrupt */
+#define ETH_DMA_IT_TBU       ((uint32_t)0x00000004)  /*!< Transmit buffer unavailable interrupt */
+#define ETH_DMA_IT_TPS       ((uint32_t)0x00000002)  /*!< Transmit process stopped interrupt */
+#define ETH_DMA_IT_T         ((uint32_t)0x00000001)  /*!< Transmit interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_transmit_process_state ETH DMA transmit process state 
+  * @{
+  */ 
+#define ETH_DMA_TRANSMITPROCESS_STOPPED     ((uint32_t)0x00000000)  /*!< Stopped - Reset or Stop Tx Command issued */
+#define ETH_DMA_TRANSMITPROCESS_FETCHING    ((uint32_t)0x00100000)  /*!< Running - fetching the Tx descriptor */
+#define ETH_DMA_TRANSMITPROCESS_WAITING     ((uint32_t)0x00200000)  /*!< Running - waiting for status */
+#define ETH_DMA_TRANSMITPROCESS_READING     ((uint32_t)0x00300000)  /*!< Running - reading the data from host memory */
+#define ETH_DMA_TRANSMITPROCESS_SUSPENDED   ((uint32_t)0x00600000)  /*!< Suspended - Tx Descriptor unavailable */
+#define ETH_DMA_TRANSMITPROCESS_CLOSING     ((uint32_t)0x00700000)  /*!< Running - closing Rx descriptor */
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup ETH_DMA_receive_process_state ETH DMA receive process state 
+  * @{
+  */ 
+#define ETH_DMA_RECEIVEPROCESS_STOPPED      ((uint32_t)0x00000000)  /*!< Stopped - Reset or Stop Rx Command issued */
+#define ETH_DMA_RECEIVEPROCESS_FETCHING     ((uint32_t)0x00020000)  /*!< Running - fetching the Rx descriptor */
+#define ETH_DMA_RECEIVEPROCESS_WAITING      ((uint32_t)0x00060000)  /*!< Running - waiting for packet */
+#define ETH_DMA_RECEIVEPROCESS_SUSPENDED    ((uint32_t)0x00080000)  /*!< Suspended - Rx Descriptor unavailable */
+#define ETH_DMA_RECEIVEPROCESS_CLOSING      ((uint32_t)0x000A0000)  /*!< Running - closing descriptor */
+#define ETH_DMA_RECEIVEPROCESS_QUEUING      ((uint32_t)0x000E0000)  /*!< Running - queuing the receive frame into host memory */
+
+/**
+  * @}
+  */
+
+/** @defgroup ETH_DMA_overflow ETH DMA overflow
+  * @{
+  */ 
+#define ETH_DMA_OVERFLOW_RXFIFOCOUNTER      ((uint32_t)0x10000000)  /*!< Overflow bit for FIFO overflow counter */
+#define ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER ((uint32_t)0x00010000)  /*!< Overflow bit for missed frame counter */
+/**
+  * @}
+  */ 
+
+/** @defgroup ETH_EXTI_LINE_WAKEUP ETH EXTI LINE WAKEUP
+  * @{
+  */ 
+#define ETH_EXTI_LINE_WAKEUP              ((uint32_t)0x00080000)  /*!< External interrupt line 19 Connected to the ETH EXTI Line */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Macros ETH Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+ 
+/** @brief Reset ETH handle state
+  * @param  __HANDLE__: specifies the ETH handle.
+  * @retval None
+  */
+#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ETH_STATE_RESET)
+
+/** 
+  * @brief  Checks whether the specified ETHERNET DMA Tx Desc flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag of TDES0 to check.
+  * @retval the ETH_DMATxDescFlag (SET or RESET).
+  */
+#define __HAL_ETH_DMATXDESC_GET_FLAG(__HANDLE__, __FLAG__)             ((__HANDLE__)->TxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA Rx Desc flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag of RDES0 to check.
+  * @retval the ETH_DMATxDescFlag (SET or RESET).
+  */
+#define __HAL_ETH_DMARXDESC_GET_FLAG(__HANDLE__, __FLAG__)             ((__HANDLE__)->RxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+  * @brief  Enables the specified DMA Rx Desc receive interrupt.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMARXDESC_ENABLE_IT(__HANDLE__)                          ((__HANDLE__)->RxDesc->ControlBufferSize &=(~(uint32_t)ETH_DMARXDESC_DIC))
+
+/**
+  * @brief  Disables the specified DMA Rx Desc receive interrupt.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMARXDESC_DISABLE_IT(__HANDLE__)                         ((__HANDLE__)->RxDesc->ControlBufferSize |= ETH_DMARXDESC_DIC)
+
+/**
+  * @brief  Set the specified DMA Rx Desc Own bit.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMARXDESC_SET_OWN_BIT(__HANDLE__)                           ((__HANDLE__)->RxDesc->Status |= ETH_DMARXDESC_OWN)
+
+/**
+  * @brief  Returns the specified ETHERNET DMA Tx Desc collision count.
+  * @param  __HANDLE__: ETH Handle                     
+  * @retval The Transmit descriptor collision counter value.
+  */
+#define __HAL_ETH_DMATXDESC_GET_COLLISION_COUNT(__HANDLE__)                   (((__HANDLE__)->TxDesc->Status & ETH_DMATXDESC_CC) >> ETH_DMATXDESC_COLLISION_COUNTSHIFT)
+
+/**
+  * @brief  Set the specified DMA Tx Desc Own bit.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_SET_OWN_BIT(__HANDLE__)                       ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_OWN)
+
+/**
+  * @brief  Enables the specified DMA Tx Desc Transmit interrupt.
+  * @param  __HANDLE__: ETH Handle                   
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_ENABLE_IT(__HANDLE__)                          ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_IC)
+
+/**
+  * @brief  Disables the specified DMA Tx Desc Transmit interrupt.
+  * @param  __HANDLE__: ETH Handle             
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_DISABLE_IT(__HANDLE__)                          ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_IC)
+
+/**
+  * @brief  Selects the specified ETHERNET DMA Tx Desc Checksum Insertion.
+  * @param  __HANDLE__: ETH Handle  
+  * @param  __CHECKSUM__: specifies is the DMA Tx desc checksum insertion.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_DMATXDESC_CHECKSUMBYPASS : Checksum bypass
+  *     @arg ETH_DMATXDESC_CHECKSUMIPV4HEADER : IPv4 header checksum
+  *     @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT : TCP/UDP/ICMP checksum. Pseudo header checksum is assumed to be present
+  *     @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL : TCP/UDP/ICMP checksum fully in hardware including pseudo header                                                                
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_CHECKSUM_INSERTION(__HANDLE__, __CHECKSUM__)     ((__HANDLE__)->TxDesc->Status |= (__CHECKSUM__))
+
+/**
+  * @brief  Enables the DMA Tx Desc CRC.
+  * @param  __HANDLE__: ETH Handle 
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_CRC_ENABLE(__HANDLE__)                          ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DC)
+
+/**
+  * @brief  Disables the DMA Tx Desc CRC.
+  * @param  __HANDLE__: ETH Handle 
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_CRC_DISABLE(__HANDLE__)                         ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DC)
+
+/**
+  * @brief  Enables the DMA Tx Desc padding for frame shorter than 64 bytes.
+  * @param  __HANDLE__: ETH Handle 
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_ENABLE(__HANDLE__)            ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DP)
+
+/**
+  * @brief  Disables the DMA Tx Desc padding for frame shorter than 64 bytes.
+  * @param  __HANDLE__: ETH Handle 
+  * @retval None
+  */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_DISABLE(__HANDLE__)           ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DP)
+
+/** 
+ * @brief  Enables the specified ETHERNET MAC interrupts.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+  *   enabled or disabled.
+  *   This parameter can be any combination of the following values:
+  *     @arg ETH_MAC_IT_TST : Time stamp trigger interrupt 
+  *     @arg ETH_MAC_IT_PMT : PMT interrupt 
+  * @retval None
+  */
+#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__)                 ((__HANDLE__)->Instance->MACIMR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified ETHERNET MAC interrupts.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+  *   enabled or disabled.
+  *   This parameter can be any combination of the following values:
+  *     @arg ETH_MAC_IT_TST : Time stamp trigger interrupt 
+  *     @arg ETH_MAC_IT_PMT : PMT interrupt
+  * @retval None
+  */
+#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__)                ((__HANDLE__)->Instance->MACIMR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Initiate a Pause Control Frame (Full-duplex only).
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_INITIATE_PAUSE_CONTROL_FRAME(__HANDLE__)              ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+  * @brief  Checks whether the ETHERNET flow control busy bit is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @retval The new state of flow control busy status bit (SET or RESET).
+  */
+#define __HAL_ETH_GET_FLOW_CONTROL_BUSY_STATUS(__HANDLE__)               (((__HANDLE__)->Instance->MACFCR & ETH_MACFCR_FCBBPA) == ETH_MACFCR_FCBBPA)
+
+/**
+  * @brief  Enables the MAC Back Pressure operation activation (Half-duplex only).
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_ENABLE(__HANDLE__)          ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+  * @brief  Disables the MAC BackPressure operation activation (Half-duplex only).
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_DISABLE(__HANDLE__)         ((__HANDLE__)->Instance->MACFCR &= ~ETH_MACFCR_FCBBPA)
+
+/**
+  * @brief  Checks whether the specified ETHERNET MAC flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_MAC_FLAG_TST  : Time stamp trigger flag   
+  *     @arg ETH_MAC_FLAG_MMCT : MMC transmit flag  
+  *     @arg ETH_MAC_FLAG_MMCR : MMC receive flag   
+  *     @arg ETH_MAC_FLAG_MMC  : MMC flag  
+  *     @arg ETH_MAC_FLAG_PMT  : PMT flag  
+  * @retval The state of ETHERNET MAC flag.
+  */
+#define __HAL_ETH_MAC_GET_FLAG(__HANDLE__, __FLAG__)                   (((__HANDLE__)->Instance->MACSR &( __FLAG__)) == ( __FLAG__))
+
+/** 
+  * @brief  Enables the specified ETHERNET DMA interrupts.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+  *   enabled @ref ETH_DMA_Interrupts
+  * @retval None
+  */
+#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__)                 ((__HANDLE__)->Instance->DMAIER |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified ETHERNET DMA interrupts.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+  *   disabled. @ref ETH_DMA_Interrupts
+  * @retval None
+  */
+#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__)                ((__HANDLE__)->Instance->DMAIER &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Clears the ETHERNET DMA IT pending bit.
+  * @param  __HANDLE__   : ETH Handle
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts
+  * @retval None
+  */
+#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__)      ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA flag is set or not.
+* @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag to check. @ref ETH_DMA_Flags
+  * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+  */
+#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__)                   (((__HANDLE__)->Instance->DMASR &( __FLAG__)) == ( __FLAG__))
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __FLAG__: specifies the flag to clear. @ref ETH_DMA_Flags
+  * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+  */
+#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__)                 ((__HANDLE__)->Instance->DMASR = (__FLAG__))
+
+/**
+  * @brief  Checks whether the specified ETHERNET DMA overflow flag is set or not.
+  * @param  __HANDLE__: ETH Handle
+  * @param  __OVERFLOW__: specifies the DMA overflow flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_DMA_OVERFLOW_RXFIFOCOUNTER : Overflow for FIFO Overflows Counter
+  *     @arg ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER : Overflow for Buffer Unavailable Missed Frame Counter
+  * @retval The state of ETHERNET DMA overflow Flag (SET or RESET).
+  */
+#define __HAL_ETH_GET_DMA_OVERFLOW_STATUS(__HANDLE__, __OVERFLOW__)       (((__HANDLE__)->Instance->DMAMFBOCR & (__OVERFLOW__)) == (__OVERFLOW__))
+
+/**
+  * @brief  Set the DMA Receive status watchdog timer register value
+  * @param  __HANDLE__: ETH Handle
+  * @param  __VALUE__: DMA Receive status watchdog timer register value   
+  * @retval None
+  */
+#define __HAL_ETH_SET_RECEIVE_WATCHDOG_TIMER(__HANDLE__, __VALUE__)       ((__HANDLE__)->Instance->DMARSWTR = (__VALUE__))
+
+/** 
+  * @brief  Enables any unicast packet filtered by the MAC address
+  *   recognition to be a wake-up frame.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_ENABLE(__HANDLE__)               ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_GU)
+
+/**
+  * @brief  Disables any unicast packet filtered by the MAC address
+  *   recognition to be a wake-up frame.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_DISABLE(__HANDLE__)              ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_GU)
+
+/**
+  * @brief  Enables the MAC Wake-Up Frame Detection.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_ENABLE(__HANDLE__)              ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_WFE)
+
+/**
+  * @brief  Disables the MAC Wake-Up Frame Detection.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_DISABLE(__HANDLE__)             ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+  * @brief  Enables the MAC Magic Packet Detection.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_ENABLE(__HANDLE__)              ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_MPE)
+
+/**
+  * @brief  Disables the MAC Magic Packet Detection.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_DISABLE(__HANDLE__)             ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+  * @brief  Enables the MAC Power Down.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_POWER_DOWN_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_PD)
+
+/**
+  * @brief  Disables the MAC Power Down.
+  * @param  __HANDLE__: ETH Handle
+  * @retval None
+  */
+#define __HAL_ETH_POWER_DOWN_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_PD)
+
+/**
+  * @brief  Checks whether the specified ETHERNET PMT flag is set or not.
+  * @param  __HANDLE__: ETH Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg ETH_PMT_FLAG_WUFFRPR : Wake-Up Frame Filter Register Pointer Reset 
+  *     @arg ETH_PMT_FLAG_WUFR    : Wake-Up Frame Received 
+  *     @arg ETH_PMT_FLAG_MPR     : Magic Packet Received
+  * @retval The new state of ETHERNET PMT Flag (SET or RESET).
+  */
+#define __HAL_ETH_GET_PMT_FLAG_STATUS(__HANDLE__, __FLAG__)               (((__HANDLE__)->Instance->MACPMTCSR &( __FLAG__)) == ( __FLAG__))
+
+/** 
+  * @brief  Preset and Initialize the MMC counters to almost-full value: 0xFFFF_FFF0 (full - 16)
+  * @param   __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTER_FULL_PRESET(__HANDLE__)                     ((__HANDLE__)->Instance->MMCCR |= (ETH_MMCCR_MCFHP | ETH_MMCCR_MCP))
+
+/**
+  * @brief  Preset and Initialize the MMC counters to almost-half value: 0x7FFF_FFF0 (half - 16)
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTER_HALF_PRESET(__HANDLE__)                     do{(__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCFHP;\
+                                                                          (__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCP;} while (0)
+
+/**
+  * @brief  Enables the MMC Counter Freeze.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_ENABLE(__HANDLE__)                  ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCF)
+
+/**
+  * @brief  Disables the MMC Counter Freeze.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_DISABLE(__HANDLE__)                 ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCF)
+
+/**
+  * @brief  Enables the MMC Reset On Read.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_ENABLE(__HANDLE__)                ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_ROR)
+
+/**
+  * @brief  Disables the MMC Reset On Read.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_DISABLE(__HANDLE__)               ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_ROR)
+
+/**
+  * @brief  Enables the MMC Counter Stop Rollover.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_ENABLE(__HANDLE__)            ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_CSR)
+
+/**
+  * @brief  Disables the MMC Counter Stop Rollover.
+  * @param  __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_DISABLE(__HANDLE__)           ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CSR)
+
+/**
+  * @brief  Resets the MMC Counters.
+  * @param   __HANDLE__: ETH Handle.
+  * @retval None
+  */
+#define __HAL_ETH_MMC_COUNTERS_RESET(__HANDLE__)                         ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CR)
+
+/**
+  * @brief  Enables the specified ETHERNET MMC Rx interrupts.
+  * @param   __HANDLE__: ETH Handle.
+  * @param  __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values:  
+  *     @arg ETH_MMC_IT_RGUF  : When Rx good unicast frames counter reaches half the maximum value 
+  *     @arg ETH_MMC_IT_RFAE  : When Rx alignment error counter reaches half the maximum value 
+  *     @arg ETH_MMC_IT_RFCE  : When Rx crc error counter reaches half the maximum value
+  * @retval None
+  */
+#define __HAL_ETH_MMC_RX_IT_ENABLE(__HANDLE__, __INTERRUPT__)               (__HANDLE__)->Instance->MMCRIMR &= ~((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+  * @brief  Disables the specified ETHERNET MMC Rx interrupts.
+  * @param   __HANDLE__: ETH Handle.
+  * @param  __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values: 
+  *     @arg ETH_MMC_IT_RGUF  : When Rx good unicast frames counter reaches half the maximum value 
+  *     @arg ETH_MMC_IT_RFAE  : When Rx alignment error counter reaches half the maximum value 
+  *     @arg ETH_MMC_IT_RFCE  : When Rx crc error counter reaches half the maximum value
+  * @retval None
+  */
+#define __HAL_ETH_MMC_RX_IT_DISABLE(__HANDLE__, __INTERRUPT__)              (__HANDLE__)->Instance->MMCRIMR |= ((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+  * @brief  Enables the specified ETHERNET MMC Tx interrupts.
+  * @param   __HANDLE__: ETH Handle.
+  * @param  __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values:  
+  *     @arg ETH_MMC_IT_TGF   : When Tx good frame counter reaches half the maximum value 
+  *     @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value 
+  *     @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value 
+  * @retval None
+  */
+#define __HAL_ETH_MMC_TX_IT_ENABLE(__HANDLE__, __INTERRUPT__)            ((__HANDLE__)->Instance->MMCRIMR &= ~ (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified ETHERNET MMC Tx interrupts.
+  * @param   __HANDLE__: ETH Handle.
+  * @param  __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values:  
+  *     @arg ETH_MMC_IT_TGF   : When Tx good frame counter reaches half the maximum value 
+  *     @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value 
+  *     @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value 
+  * @retval None
+  */
+#define __HAL_ETH_MMC_TX_IT_DISABLE(__HANDLE__, __INTERRUPT__)           ((__HANDLE__)->Instance->MMCRIMR |= (__INTERRUPT__))
+
+/**
+  * @brief  Enables the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Disables the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief Enable event on ETH External event line.
+  * @retval None.
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_EVENT()  EXTI->EMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief Disable event on ETH External event line
+  * @retval None.
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_EVENT() EXTI->EMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Get flag of the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Clear flag of the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Enables rising edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER()  EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP
+                                                            
+/**
+  * @brief  Disables the rising edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_RISING_EDGE_TRIGGER()  EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP)                                                          
+
+/**
+  * @brief  Enables falling edge trigger to the ETH External interrupt line.
+  * @retval None
+  */                                                      
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER()  EXTI->FTSR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Disables falling edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLING_EDGE_TRIGGER()  EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief  Enables rising/falling edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER()  EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP;\
+                                                              EXTI->FTSR |= ETH_EXTI_LINE_WAKEUP
+
+/**
+  * @brief  Disables rising/falling edge trigger to the ETH External interrupt line.
+  * @retval None
+  */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLINGRISING_TRIGGER()  EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+                                                               EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+  * @brief Generate a Software interrupt on selected EXTI line.
+  * @retval None.
+  */
+#define __HAL_ETH_WAKEUP_EXTI_GENERATE_SWIT()                  EXTI->SWIER|= ETH_EXTI_LINE_WAKEUP
+
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup ETH_Exported_Functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions  ****************************/
+
+/** @addtogroup ETH_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t* TxBuff, uint32_t TxBuffCount);
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount);
+
+/**
+  * @}
+  */
+/* IO operation functions  ****************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group2
+  * @{
+  */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength);
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth);
+/* Communication with PHY functions*/
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue);
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth);
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth);
+/* Callback in non blocking modes (Interrupt) */
+void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group3
+  * @{
+  */
+
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf);
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf);
+/**
+  * @}
+  */ 
+
+/* Peripheral State functions  ************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group4
+  * @{
+  */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_ETH_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_flash.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,821 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_flash.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   FLASH HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the internal FLASH memory:
+  *           + Program operations functions
+  *           + Memory Control functions 
+  *           + Peripheral Errors functions
+  *         
+  @verbatim
+  ==============================================================================
+                        ##### FLASH peripheral features #####
+  ==============================================================================
+           
+  [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses 
+       to the Flash memory. It implements the erase and program Flash memory operations 
+       and the read and write protection mechanisms.
+      
+  [..] The Flash memory interface accelerates code execution with a system of instruction
+       prefetch and cache lines. 
+
+  [..] The FLASH main features are:
+      (+) Flash memory read operations
+      (+) Flash memory program/erase operations
+      (+) Read / write protections
+      (+) Prefetch on I-Code
+      (+) 64 cache lines of 128 bits on I-Code
+      (+) 8 cache lines of 128 bits on D-Code
+      
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]                             
+      This driver provides functions and macros to configure and program the FLASH 
+      memory of all STM32F7xx devices.
+    
+      (#) FLASH Memory IO Programming functions: 
+           (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and 
+                HAL_FLASH_Lock() functions
+           (++) Program functions: byte, half word, word and double word
+           (++) There Two modes of programming :
+            (+++) Polling mode using HAL_FLASH_Program() function
+            (+++) Interrupt mode using HAL_FLASH_Program_IT() function
+    
+      (#) Interrupts and flags management functions : 
+           (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
+           (++) Wait for last FLASH operation according to its status
+           (++) Get error flag status by calling HAL_SetErrorCode()          
+    [..] 
+      In addition to these functions, this driver includes a set of macros allowing
+      to handle the following operations:
+       (+) Set the latency
+       (+) Enable/Disable the prefetch buffer
+       (+) Enable/Disable the Instruction cache and the Data cache
+       (+) Reset the Instruction cache and the Data cache
+       (+) Enable/Disable the FLASH interrupts
+       (+) Monitor the FLASH flags status
+    [..]	   
+	(@) For any Flash memory program operation (erase or program), the CPU clock frequency
+        (HCLK) must be at least 1MHz. 
+	(@) The contents of the Flash memory are not guaranteed if a device reset occurs during 
+	    a Flash memory operation.
+    (@) Any attempt to read the Flash memory while it is being written or erased, causes the 
+	    bus to stall. Read operations are processed correctly once the program operation has 
+		completed. This means that code or data fetches cannot be performed while a write/erase 
+		operation is ongoing.
+          
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FLASH FLASH
+  * @brief FLASH HAL module driver
+  * @{
+  */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Constants
+  * @{
+  */
+#define SECTOR_MASK               ((uint32_t)0xFFFFFF07)
+#define FLASH_TIMEOUT_VALUE       ((uint32_t)50000)/* 50 s */
+/**
+  * @}
+  */         
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASH_Private_Variables
+  * @{
+  */
+/* Variable used for Erase sectors under interruption */
+FLASH_ProcessTypeDef pFlash;
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASH_Private_Functions
+  * @{
+  */
+/* Program operations */
+static void   FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
+static void   FLASH_Program_Word(uint32_t Address, uint32_t Data);
+static void   FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
+static void   FLASH_Program_Byte(uint32_t Address, uint8_t Data);
+static void   FLASH_SetErrorCode(void);
+
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
+  * @{
+  */
+  
+/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions 
+ *  @brief   Programming operation functions 
+ *
+@verbatim   
+ ===============================================================================
+                  ##### Programming operation functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to manage the FLASH 
+    program operations.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Program byte, halfword, word or double word at a specified address
+  * @param  TypeProgram:  Indicate the way to program at a specified address.
+  *                           This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address:  specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed
+  * 
+  * @retval HAL_StatusTypeDef HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+  
+  if(status == HAL_OK)
+  {
+    switch(TypeProgram)
+    {
+      case FLASH_TYPEPROGRAM_BYTE :
+      {
+        /*Program byte (8-bit) at a specified address.*/
+        FLASH_Program_Byte(Address, (uint8_t) Data);
+        break;
+      }
+      
+      case FLASH_TYPEPROGRAM_HALFWORD :
+      {
+        /*Program halfword (16-bit) at a specified address.*/
+        FLASH_Program_HalfWord(Address, (uint16_t) Data);
+        break;
+      }
+      
+      case FLASH_TYPEPROGRAM_WORD :
+      {
+        /*Program word (32-bit) at a specified address.*/
+        FLASH_Program_Word(Address, (uint32_t) Data);
+        break;
+      }
+      
+      case FLASH_TYPEPROGRAM_DOUBLEWORD :
+      {
+        /*Program double word (64-bit) at a specified address.*/
+        FLASH_Program_DoubleWord(Address, Data);
+        break;
+      }
+      default :
+        break;
+    }
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+    
+    /* If the program operation is completed, disable the PG Bit */
+    FLASH->CR &= (~FLASH_CR_PG);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+
+  return status;
+}
+
+/**
+  * @brief   Program byte, halfword, word or double word at a specified address  with interrupt enabled.
+  * @param  TypeProgram:  Indicate the way to program at a specified address.
+  *                           This parameter can be a value of @ref FLASH_Type_Program
+  * @param  Address:  specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed
+  * 
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
+
+  /* Enable End of FLASH Operation interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+  
+  /* Enable Error source interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+  
+  /* Clear pending flags (if any) */  
+  __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP    | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
+                         FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_ERSERR);  
+
+  pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
+  pFlash.Address = Address;
+  
+  switch(TypeProgram)
+  {
+    case FLASH_TYPEPROGRAM_BYTE :
+    {
+      /*Program byte (8-bit) at a specified address.*/
+      FLASH_Program_Byte(Address, (uint8_t) Data);
+      break;
+    }
+    
+    case FLASH_TYPEPROGRAM_HALFWORD :
+    {
+      /*Program halfword (16-bit) at a specified address.*/
+      FLASH_Program_HalfWord(Address, (uint16_t) Data);
+      break;
+    }
+    
+    case FLASH_TYPEPROGRAM_WORD :
+    {
+      /*Program word (32-bit) at a specified address.*/
+      FLASH_Program_Word(Address, (uint32_t) Data);
+      break;
+    }
+    
+    case FLASH_TYPEPROGRAM_DOUBLEWORD :
+    {
+      /*Program double word (64-bit) at a specified address.*/
+      FLASH_Program_DoubleWord(Address, Data);
+      break;
+    }
+    default :
+      break;
+  }
+  return status;
+}
+
+/**
+  * @brief This function handles FLASH interrupt request.
+  * @retval None
+  */
+void HAL_FLASH_IRQHandler(void)
+{
+  uint32_t temp = 0;
+  
+  /* If the program operation is completed, disable the PG Bit */
+  FLASH->CR &= (~FLASH_CR_PG);
+
+  /* If the erase operation is completed, disable the SER Bit */
+  FLASH->CR &= (~FLASH_CR_SER);
+  FLASH->CR &= SECTOR_MASK; 
+
+  /* if the erase operation is completed, disable the MER Bit */
+  FLASH->CR &= (~FLASH_MER_BIT);
+
+  /* Check FLASH End of Operation flag  */
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
+  {
+    switch (pFlash.ProcedureOnGoing)
+    {
+      case FLASH_PROC_SECTERASE :
+      {
+        /* Nb of sector to erased can be decreased */
+        pFlash.NbSectorsToErase--;
+
+        /* Check if there are still sectors to erase */
+        if(pFlash.NbSectorsToErase != 0)
+        {
+          temp = pFlash.Sector;
+          /* Indicate user which sector has been erased */
+          HAL_FLASH_EndOfOperationCallback(temp);
+
+          /* Clear pending flags (if any) */  
+          __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);  
+
+          /* Increment sector number */
+          temp = ++pFlash.Sector;
+          FLASH_Erase_Sector(temp, pFlash.VoltageForErase);
+        }
+        else
+        {
+          /* No more sectors to Erase, user callback can be called.*/
+          /* Reset Sector and stop Erase sectors procedure */
+          pFlash.Sector = temp = 0xFFFFFFFF;
+          /* FLASH EOP interrupt user callback */
+          HAL_FLASH_EndOfOperationCallback(temp);
+          /* Sector Erase procedure is completed */
+          pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+          /* Clear FLASH End of Operation pending bit */
+          __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+        }
+        break;
+      }
+    
+      case FLASH_PROC_MASSERASE :
+      {
+        /* MassErase ended. Return the selected bank : in this product we don't have Banks */
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(0);
+        /* MAss Erase procedure is completed */
+        pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+        /* Clear FLASH End of Operation pending bit */
+        __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+        break;
+      }
+
+      case FLASH_PROC_PROGRAM :
+      {
+        /*Program ended. Return the selected address*/
+        /* FLASH EOP interrupt user callback */
+        HAL_FLASH_EndOfOperationCallback(pFlash.Address);
+        /* Programming procedure is completed */
+        pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+        /* Clear FLASH End of Operation pending bit */
+        __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
+        break;
+      }
+      default :
+        break;
+    }
+  }
+  
+  /* Check FLASH operation error flags */
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR  | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR )) != RESET)
+  {
+    switch (pFlash.ProcedureOnGoing)
+    {
+      case FLASH_PROC_SECTERASE :
+      {
+        /* return the faulty sector */
+        temp = pFlash.Sector;
+        pFlash.Sector = 0xFFFFFFFF;
+        break;
+      }
+      case FLASH_PROC_MASSERASE :
+      {
+        /* No return in case of Mass Erase */
+        temp = 0;
+        break;
+      }
+      case FLASH_PROC_PROGRAM :
+      {
+        /*return the faulty address*/
+        temp = pFlash.Address;
+        break;
+      }
+    default :
+      break;
+    }
+    /*Save the Error code*/
+    FLASH_SetErrorCode();
+
+    /* FLASH error interrupt user callback */
+    HAL_FLASH_OperationErrorCallback(temp);
+    /* Clear FLASH error pending bits */
+    __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR  | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR );
+
+    /*Stop the procedure ongoing */
+    pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
+  }
+  
+  if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
+  {
+    /* Disable End of FLASH Operation interrupt */
+    __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP);
+
+    /* Disable Error source interrupt */
+    __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(&pFlash);
+  }
+  
+}
+
+/**
+  * @brief  FLASH end of operation interrupt callback
+  * @param  ReturnValue: The value saved in this parameter depends on the ongoing procedure
+  *                 - Sectors Erase: Sector which has been erased (if 0xFFFFFFFF, it means that 
+  *                                  all the selected sectors have been erased)
+  *                 - Program      : Address which was selected for data program
+  *                 - Mass Erase   : No return value expected
+  * @retval None
+  */
+__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ReturnValue);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
+  */ 
+}
+
+/**
+  * @brief  FLASH operation error interrupt callback
+  * @param  ReturnValue: The value saved in this parameter depends on the ongoing procedure
+  *                 - Sectors Erase: Sector which has been erased (if 0xFFFFFFFF, it means that 
+  *                                  all the selected sectors have been erased)
+  *                 - Program      : Address which was selected for data program
+  *                 - Mass Erase   : No return value expected
+  * @retval None
+  */
+__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(ReturnValue);
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_FLASH_OperationErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions 
+ *  @brief   management functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the FLASH 
+    memory operations.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Unlock the FLASH control register access
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Unlock(void)
+{
+  if((FLASH->CR & FLASH_CR_LOCK) != RESET)
+  {
+    /* Authorize the FLASH Registers access */
+    FLASH->KEYR = FLASH_KEY1;
+    FLASH->KEYR = FLASH_KEY2;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+  
+  return HAL_OK; 
+}
+
+/**
+  * @brief  Locks the FLASH control register access
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_Lock(void)
+{
+  /* Set the LOCK Bit to lock the FLASH Registers access */
+  FLASH->CR |= FLASH_CR_LOCK;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Unlock the FLASH Option Control Registers access.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
+{
+  if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET)
+  {
+    /* Authorizes the Option Byte register programming */
+    FLASH->OPTKEYR = FLASH_OPT_KEY1;
+    FLASH->OPTKEYR = FLASH_OPT_KEY2;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }  
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Lock the FLASH Option Control Registers access.
+  * @retval HAL Status 
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
+{
+  /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
+  FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Launch the option byte loading.
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
+{
+  /* Set the OPTSTRT bit in OPTCR register */
+  FLASH->OPTCR |= FLASH_OPTCR_OPTSTRT;
+
+  /* Wait for last operation to be completed */
+  return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE)); 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions 
+ *  @brief   Peripheral Errors functions 
+ *
+@verbatim   
+ ===============================================================================
+                ##### Peripheral Errors functions #####
+ ===============================================================================  
+    [..]
+    This subsection permits to get in run-time Errors of the FLASH peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Get the specific FLASH error flag.
+  * @retval FLASH_ErrorCode: The returned value can be:
+  *            @arg FLASH_ERROR_ERS: FLASH Erasing Sequence error flag 
+  *            @arg FLASH_ERROR_PGP: FLASH Programming Parallelism error flag  
+  *            @arg FLASH_ERROR_PGA: FLASH Programming Alignment error flag
+  *            @arg FLASH_ERROR_WRP: FLASH Write protected error flag
+  *            @arg FLASH_ERROR_OPERATION: FLASH operation Error flag 
+  */
+uint32_t HAL_FLASH_GetError(void)
+{ 
+   return pFlash.ErrorCode;
+}  
+  
+/**
+  * @}
+  */    
+
+/**
+  * @brief  Wait for a FLASH operation to complete.
+  * @param  Timeout: maximum flash operationtimeout
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
+{ 
+  uint32_t tickstart = 0;
+  
+  /* Clear Error Code */
+  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
+  
+  /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
+     Even if the FLASH operation fails, the BUSY flag will be reset and an error
+     flag will be set */
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET) 
+  { 
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        return HAL_TIMEOUT;
+      }
+    } 
+  }
+  
+  if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR )) != RESET)
+  {
+    /*Save the error code*/
+    FLASH_SetErrorCode();
+    return HAL_ERROR;
+  }
+
+  /* If there is an error flag set */
+  return HAL_OK;
+  
+}  
+
+/**
+  * @brief  Program a double word (64-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V and an External Vpp is present.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address: specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+  
+  *(__IO uint64_t*)Address = Data;
+  
+  /* Data synchronous Barrier (DSB) Just after the write operation
+     This will force the CPU to respect the sequence of instruction (no optimization).*/
+  __DSB();
+}
+
+
+/**
+  * @brief  Program word (32-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address: specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_Word(uint32_t Address, uint32_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= FLASH_PSIZE_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint32_t*)Address = Data;
+  
+  /* Data synchronous Barrier (DSB) Just after the write operation
+     This will force the CPU to respect the sequence of instruction (no optimization).*/
+  __DSB();
+}
+
+/**
+  * @brief  Program a half-word (16-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address: specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= FLASH_PSIZE_HALF_WORD;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint16_t*)Address = Data;
+
+  /* Data synchronous Barrier (DSB) Just after the write operation
+     This will force the CPU to respect the sequence of instruction (no optimization).*/
+  __DSB();
+  
+}
+
+/**
+  * @brief  Program byte (8-bit) at a specified address.
+  * @note   This function must be used when the device voltage range is from
+  *         2.7V to 3.6V.
+  *
+  * @note   If an erase and a program operations are requested simultaneously,    
+  *         the erase operation is performed before the program one.
+  *  
+  * @param  Address: specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed.
+  * @retval None
+  */
+static void FLASH_Program_Byte(uint32_t Address, uint8_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+  
+  /* If the previous operation is completed, proceed to program the new data */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= FLASH_PSIZE_BYTE;
+  FLASH->CR |= FLASH_CR_PG;
+
+  *(__IO uint8_t*)Address = Data;
+
+  /* Data synchronous Barrier (DSB) Just after the write operation
+     This will force the CPU to respect the sequence of instruction (no optimization).*/
+  __DSB();
+}
+
+/**
+  * @brief  Set the specific FLASH error flag.
+  * @retval None
+  */
+static void FLASH_SetErrorCode(void)
+{ 
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET)
+  {
+   pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET)
+  {
+   pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP;
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_ERSERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_ERS;
+  }
+  
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET)
+  {
+    pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION;
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_flash.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,401 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_flash.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of FLASH HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_FLASH_H
+#define __STM32F7xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+  * @{
+  */
+ 
+/**
+  * @brief  FLASH Procedure structure definition
+  */
+typedef enum 
+{
+  FLASH_PROC_NONE = 0, 
+  FLASH_PROC_SECTERASE,
+  FLASH_PROC_MASSERASE,
+  FLASH_PROC_PROGRAM
+} FLASH_ProcedureTypeDef;
+
+
+/** 
+  * @brief  FLASH handle Structure definition  
+  */
+typedef struct
+{
+  __IO FLASH_ProcedureTypeDef ProcedureOnGoing;   /* Internal variable to indicate which procedure is ongoing or not in IT context */
+  
+  __IO uint32_t               NbSectorsToErase;   /* Internal variable to save the remaining sectors to erase in IT context        */
+  
+  __IO uint8_t                VoltageForErase;    /* Internal variable to provide voltage range selected by user in IT context     */
+  
+  __IO uint32_t               Sector;             /* Internal variable to define the current sector which is erasing               */
+  
+  __IO uint32_t               Address;            /* Internal variable to save address selected for program                        */
+  
+  HAL_LockTypeDef             Lock;               /* FLASH locking object                                                          */
+
+  __IO uint32_t               ErrorCode;          /* FLASH error code                                                              */
+
+}FLASH_ProcessTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+  * @{
+  */  
+
+/** @defgroup FLASH_Error_Code FLASH Error Code
+  * @brief    FLASH Error Code 
+  * @{
+  */ 
+#define HAL_FLASH_ERROR_NONE         ((uint32_t)0x00000000)    /*!< No error                      */
+#define HAL_FLASH_ERROR_ERS          ((uint32_t)0x00000002)    /*!< Programming Sequence error    */
+#define HAL_FLASH_ERROR_PGP          ((uint32_t)0x00000004)    /*!< Programming Parallelism error */
+#define HAL_FLASH_ERROR_PGA          ((uint32_t)0x00000008)    /*!< Programming Alignment error   */
+#define HAL_FLASH_ERROR_WRP          ((uint32_t)0x00000010)    /*!< Write protection error        */
+#define HAL_FLASH_ERROR_OPERATION    ((uint32_t)0x00000020)    /*!< Operation Error               */
+/**
+  * @}
+  */
+  
+/** @defgroup FLASH_Type_Program FLASH Type Program
+  * @{
+  */ 
+#define FLASH_TYPEPROGRAM_BYTE        ((uint32_t)0x00)  /*!< Program byte (8-bit) at a specified address           */
+#define FLASH_TYPEPROGRAM_HALFWORD    ((uint32_t)0x01)  /*!< Program a half-word (16-bit) at a specified address   */
+#define FLASH_TYPEPROGRAM_WORD        ((uint32_t)0x02)  /*!< Program a word (32-bit) at a specified address        */
+#define FLASH_TYPEPROGRAM_DOUBLEWORD  ((uint32_t)0x03)  /*!< Program a double word (64-bit) at a specified address */
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+  * @brief Flag definition
+  * @{
+  */ 
+#define FLASH_FLAG_EOP                 FLASH_SR_EOP            /*!< FLASH End of Operation flag               */
+#define FLASH_FLAG_OPERR               FLASH_SR_OPERR          /*!< FLASH operation Error flag                */
+#define FLASH_FLAG_WRPERR              FLASH_SR_WRPERR         /*!< FLASH Write protected error flag          */
+#define FLASH_FLAG_PGAERR              FLASH_SR_PGAERR         /*!< FLASH Programming Alignment error flag    */
+#define FLASH_FLAG_PGPERR              FLASH_SR_PGPERR         /*!< FLASH Programming Parallelism error flag  */
+#define FLASH_FLAG_ERSERR              FLASH_SR_ERSERR         /*!< FLASH Erasing Sequence error flag         */
+#define FLASH_FLAG_BSY                 FLASH_SR_BSY            /*!< FLASH Busy flag                           */ 
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+  * @brief FLASH Interrupt definition
+  * @{
+  */
+#define FLASH_IT_EOP                   FLASH_CR_EOPIE          /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR                   ((uint32_t)0x02000000)  /*!< Error Interrupt source                  */
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
+  * @{
+  */
+#define FLASH_PSIZE_BYTE           ((uint32_t)0x00000000)
+#define FLASH_PSIZE_HALF_WORD      ((uint32_t)FLASH_CR_PSIZE_0)
+#define FLASH_PSIZE_WORD           ((uint32_t)FLASH_CR_PSIZE_1)
+#define FLASH_PSIZE_DOUBLE_WORD    ((uint32_t)FLASH_CR_PSIZE)
+#define CR_PSIZE_MASK              ((uint32_t)0xFFFFFCFF)
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_Keys FLASH Keys
+  * @{
+  */ 
+#define FLASH_KEY1               ((uint32_t)0x45670123)
+#define FLASH_KEY2               ((uint32_t)0xCDEF89AB)
+#define FLASH_OPT_KEY1           ((uint32_t)0x08192A3B)
+#define FLASH_OPT_KEY2           ((uint32_t)0x4C5D6E7F)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+  * @{
+  */
+/**
+  * @brief  Set the FLASH Latency.
+  * @param  __LATENCY__: FLASH Latency                   
+  *         The value of this parameter depend on device used within the same series
+  * @retval none
+  */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) \
+                  MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, (uint32_t)(__LATENCY__))
+
+/**
+  * @brief  Get the FLASH Latency.
+  * @retval FLASH Latency                   
+  *          The value of this parameter depend on device used within the same series
+  */ 
+#define __HAL_FLASH_GET_LATENCY()     (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY))
+
+/**
+  * @brief  Enable the FLASH prefetch buffer.
+  * @retval none
+  */ 
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE()  (FLASH->ACR |= FLASH_ACR_PRFTEN)
+
+/**
+  * @brief  Disable the FLASH prefetch buffer.
+  * @retval none
+  */ 
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
+
+/**
+  * @brief  Enable the FLASH Adaptive Real-Time memory accelerator.
+  * @note   The ART accelerator is available only for flash access on ITCM interface.
+  * @retval none
+  */ 
+#define __HAL_FLASH_ART_ENABLE()  SET_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
+
+/**
+  * @brief  Disable the FLASH Adaptive Real-Time memory accelerator.
+  * @retval none
+  */ 
+#define __HAL_FLASH_ART_DISABLE()   CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTEN)
+
+/**
+  * @brief  Resets the FLASH Adaptive Real-Time memory accelerator.
+  * @note   This function must be used only when the Adaptive Real-Time memory accelerator
+  *         is disabled.  
+  * @retval None
+  */
+#define __HAL_FLASH_ART_RESET()  (FLASH->ACR |= FLASH_ACR_ARTRST)
+
+/**
+  * @brief  Enable the specified FLASH interrupt.
+  * @param  __INTERRUPT__ : FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+  *     @arg FLASH_IT_ERR: Error Interrupt    
+  * @retval none
+  */  
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  (FLASH->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified FLASH interrupt.
+  * @param  __INTERRUPT__ : FLASH interrupt 
+  *         This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+  *     @arg FLASH_IT_ERR: Error Interrupt    
+  * @retval none
+  */  
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+  * @brief  Get the specified FLASH flag status. 
+  * @param  __FLAG__: specifies the FLASH flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag 
+  *            @arg FLASH_FLAG_OPERR : FLASH operation Error flag 
+  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag 
+  *            @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+  *            @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+  *            @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag 
+  *            @arg FLASH_FLAG_BSY   : FLASH Busy flag
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_FLASH_GET_FLAG(__FLAG__)   ((FLASH->SR & (__FLAG__)))
+
+/**
+  * @brief  Clear the specified FLASH flag.
+  * @param  __FLAG__: specifies the FLASH flags to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag 
+  *            @arg FLASH_FLAG_OPERR : FLASH operation Error flag 
+  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag 
+  *            @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag 
+  *            @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+  *            @arg FLASH_FLAG_ERSERR : FLASH Erasing Sequence error flag    
+  * @retval none
+  */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)   (FLASH->SR = (__FLAG__))
+/**
+  * @}
+  */
+
+/* Include FLASH HAL Extension module */
+#include "stm32f7xx_hal_flash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+  * @{
+  */
+/** @addtogroup FLASH_Exported_Functions_Group1
+  * @{
+  */
+/* Program operation functions  ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */ 
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions  **********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+/**
+  * @}
+  */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  ************************************************/
+uint32_t HAL_FLASH_GetError(void);
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Constants FLASH Private Constants
+  * @{
+  */
+
+/** 
+  * @brief   OPTCR register byte 1 (Bits[15:8]) base address  
+  */ 
+#define OPTCR_BYTE1_ADDRESS         ((uint32_t)0x40023C15)
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+  * @{
+  */
+
+/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
+  * @{
+  */
+#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
+                                    ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+                                    ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
+                                    ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))  
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_flash_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,810 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_flash_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Extended FLASH HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the FLASH extension peripheral:
+  *           + Extended programming operations functions
+  *  
+  @verbatim
+  ==============================================================================
+                   ##### Flash Extension features #####
+  ==============================================================================
+           
+  [..] Comparing to other previous devices, the FLASH interface for STM32F727xx/437xx and 
+       devices contains the following additional features 
+       
+       (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write
+           capability (RWW)
+       (+) Dual bank memory organization       
+       (+) PCROP protection for all banks
+   
+                      ##### How to use this driver #####
+  ==============================================================================
+  [..] This driver provides functions to configure and program the FLASH memory 
+       of all STM32F7xx devices. It includes
+      (#) FLASH Memory Erase functions: 
+           (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and 
+                HAL_FLASH_Lock() functions
+           (++) Erase function: Erase sector, erase all sectors
+           (++) There are two modes of erase :
+             (+++) Polling Mode using HAL_FLASHEx_Erase()
+             (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT()
+             
+      (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to :
+           (++) Set/Reset the write protection
+           (++) Set the Read protection Level
+           (++) Set the BOR level
+           (++) Program the user Option Bytes
+      (#) Advanced Option Bytes Programming functions: Use HAL_FLASHEx_AdvOBProgram() to :  
+       (++) Extended space (bank 2) erase function
+       (++) Full FLASH space (2 Mo) erase (bank 1 and bank 2)
+       (++) Dual Boot activation
+       (++) Write protection configuration for bank 2
+       (++) PCROP protection configuration and control for both banks
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FLASHEx FLASHEx
+  * @brief FLASH HAL Extension module driver
+  * @{
+  */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Constants
+  * @{
+  */    
+#define SECTOR_MASK               ((uint32_t)0xFFFFFF07)
+#define FLASH_TIMEOUT_VALUE       ((uint32_t)50000)/* 50 s */
+/**
+  * @}
+  */
+    
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Variables
+  * @{
+  */    
+extern FLASH_ProcessTypeDef pFlash;
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup FLASHEx_Private_Functions
+  * @{
+  */
+/* Option bytes control */
+static void               FLASH_MassErase(uint8_t VoltageRange);
+static HAL_StatusTypeDef  FLASH_OB_EnableWRP(uint32_t WRPSector);
+static HAL_StatusTypeDef  FLASH_OB_DisableWRP(uint32_t WRPSector);
+static HAL_StatusTypeDef  FLASH_OB_RDP_LevelConfig(uint8_t Level);
+static HAL_StatusTypeDef  FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, uint32_t Iwdgstdby);
+static HAL_StatusTypeDef  FLASH_OB_BOR_LevelConfig(uint8_t Level);
+static HAL_StatusTypeDef  FLASH_OB_BootAddressConfig(uint32_t BootOption, uint32_t Address);
+static uint32_t           FLASH_OB_GetUser(void);
+static uint32_t           FLASH_OB_GetWRP(void);
+static uint8_t            FLASH_OB_GetRDP(void);
+static uint32_t           FLASH_OB_GetBOR(void);
+static uint32_t           FLASH_OB_GetBootAddress(uint32_t BootOption);
+
+extern HAL_StatusTypeDef  FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
+  * @{
+  */
+
+/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions
+ *  @brief   Extended IO operation functions 
+ *
+@verbatim   
+ ===============================================================================
+                ##### Extended programming operation functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to manage the Extension FLASH 
+    programming operations Operations.
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Perform a mass erase or erase the specified FLASH memory sectors 
+  * @param[in]  pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
+  *         contains the configuration information for the erasing.
+  * 
+  * @param[out]  SectorError: pointer to variable  that
+  *         contains the configuration information on faulty sector in case of error 
+  *         (0xFFFFFFFF means that all the sectors have been correctly erased)
+  * 
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  uint32_t index = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    /*Initialization of SectorError variable*/
+    *SectorError = 0xFFFFFFFF;
+    
+    if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+    {
+      /*Mass erase to be done*/
+      FLASH_MassErase((uint8_t) pEraseInit->VoltageRange);
+
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+      
+      /* if the erase operation is completed, disable the MER Bit */
+      FLASH->CR &= (~FLASH_MER_BIT);
+    }
+    else
+    {
+      /* Check the parameters */
+      assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
+
+      /* Erase by sector by sector to be done*/
+      for(index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++)
+      {
+        FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange);
+
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+        
+        /* If the erase operation is completed, disable the SER Bit */
+        FLASH->CR &= (~FLASH_CR_SER);
+        FLASH->CR &= SECTOR_MASK; 
+
+        if(status != HAL_OK) 
+        {
+          /* In case of error, stop erase procedure and return the faulty sector*/
+          *SectorError = index;
+          break;
+        }
+      }
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+
+  return status;
+}
+
+/**
+  * @brief  Perform a mass erase or erase the specified FLASH memory sectors  with interrupt enabled
+  * @param  pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
+  *         contains the configuration information for the erasing.
+  * 
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
+
+  /* Enable End of FLASH Operation interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
+  
+  /* Enable Error source interrupt */
+  __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
+  
+  /* Clear pending flags (if any) */  
+  __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP    | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
+                         FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_ERSERR);  
+  
+  if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
+  {
+    /*Mass erase to be done*/
+    pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
+    FLASH_MassErase((uint8_t) pEraseInit->VoltageRange);
+  }
+  else
+  {
+    /* Erase by sector to be done*/
+
+    /* Check the parameters */
+    assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
+
+    pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE;
+    pFlash.NbSectorsToErase = pEraseInit->NbSectors;
+    pFlash.Sector = pEraseInit->Sector;
+    pFlash.VoltageForErase = (uint8_t)pEraseInit->VoltageRange;
+
+    /*Erase 1st sector and wait for IT*/
+    FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->VoltageRange);
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Program option bytes
+  * @param  pOBInit: pointer to an FLASH_OBInitStruct structure that
+  *         contains the configuration information for the programming.
+  * 
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  
+  /* Process Locked */
+  __HAL_LOCK(&pFlash);
+
+  /* Check the parameters */
+  assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
+
+  /* Write protection configuration */
+  if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
+  {
+    assert_param(IS_WRPSTATE(pOBInit->WRPState));
+    if(pOBInit->WRPState == OB_WRPSTATE_ENABLE)
+    {
+      /*Enable of Write protection on the selected Sector*/
+      status = FLASH_OB_EnableWRP(pOBInit->WRPSector);
+    }
+    else
+    {
+      /*Disable of Write protection on the selected Sector*/
+      status = FLASH_OB_DisableWRP(pOBInit->WRPSector);
+    }
+  }
+
+  /* Read protection configuration */
+  if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
+  {
+    status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
+  }
+
+  /* USER  configuration */
+  if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
+  {
+    status = FLASH_OB_UserConfig(pOBInit->USERConfig & OB_WWDG_SW, 
+                                 pOBInit->USERConfig & OB_IWDG_SW,
+                                 pOBInit->USERConfig & OB_STOP_NO_RST,
+                                 pOBInit->USERConfig & OB_STDBY_NO_RST, 
+                                 pOBInit->USERConfig & OB_IWDG_STOP_ACTIVE,
+                                 pOBInit->USERConfig & OB_IWDG_STDBY_ACTIVE);
+  }
+  
+  /* BOR Level  configuration */
+  if((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR)
+  {
+    status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel);
+  }
+  
+  /* Boot 0 Address configuration */
+  if((pOBInit->OptionType & OPTIONBYTE_BOOTADDR_0) == OPTIONBYTE_BOOTADDR_0)
+  {
+    status = FLASH_OB_BootAddressConfig(OPTIONBYTE_BOOTADDR_0, pOBInit->BootAddr0);
+  }
+  
+  /* Boot 1 Address configuration */
+  if((pOBInit->OptionType & OPTIONBYTE_BOOTADDR_1) == OPTIONBYTE_BOOTADDR_1)
+  {
+    status = FLASH_OB_BootAddressConfig(OPTIONBYTE_BOOTADDR_1, pOBInit->BootAddr1);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(&pFlash);
+
+  return status;
+}
+
+/**
+  * @brief   Get the Option byte configuration
+  * @param  pOBInit: pointer to an FLASH_OBInitStruct structure that
+  *         contains the configuration information for the programming.
+  * 
+  * @retval None
+  */
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
+{
+  pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER |\
+	                OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1;
+
+  /*Get WRP*/
+  pOBInit->WRPSector = FLASH_OB_GetWRP();
+
+  /*Get RDP Level*/
+  pOBInit->RDPLevel = FLASH_OB_GetRDP();
+
+  /*Get USER*/
+  pOBInit->USERConfig = FLASH_OB_GetUser();
+
+  /*Get BOR Level*/
+  pOBInit->BORLevel = FLASH_OB_GetBOR();
+  
+  /*Get Boot Address when Boot pin = 0 */
+  pOBInit->BootAddr0 = FLASH_OB_GetBootAddress(OPTIONBYTE_BOOTADDR_0);
+  
+  /*Get Boot Address when Boot pin = 1 */
+  pOBInit->BootAddr1 = FLASH_OB_GetBootAddress(OPTIONBYTE_BOOTADDR_1);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  Full erase of FLASH memory sectors 
+  * @param  VoltageRange: The device voltage range which defines the erase parallelism.  
+  *          This parameter can be one of the following values:
+  *            @arg VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, 
+  *                                  the operation will be done by byte (8-bit) 
+  *            @arg VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+  *                                  the operation will be done by half word (16-bit)
+  *            @arg VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+  *                                  the operation will be done by word (32-bit)
+  *            @arg VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, 
+  *                                  the operation will be done by double word (64-bit)
+  *
+  * @retval HAL Status
+  */
+static void FLASH_MassErase(uint8_t VoltageRange)
+{
+  /* Check the parameters */
+  assert_param(IS_VOLTAGERANGE(VoltageRange));
+
+  /* if the previous operation is completed, proceed to erase all sectors */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= FLASH_CR_MER;
+  FLASH->CR |= FLASH_CR_STRT | (VoltageRange <<8);
+  /* Data synchronous Barrier (DSB) Just after the write operation
+     This will force the CPU to respect the sequence of instruction (no optimization).*/
+  __DSB();
+}
+
+/**
+  * @brief  Erase the specified FLASH memory sector
+  * @param  Sector: FLASH sector to erase
+  *         The value of this parameter depend on device used within the same series      
+  * @param  VoltageRange: The device voltage range which defines the erase parallelism.  
+  *          This parameter can be one of the following values:
+  *            @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V, 
+  *                                  the operation will be done by byte (8-bit) 
+  *            @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
+  *                                  the operation will be done by half word (16-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
+  *                                  the operation will be done by word (32-bit)
+  *            @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp, 
+  *                                  the operation will be done by double word (64-bit)
+  * 
+  * @retval None
+  */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
+{
+  uint32_t tmp_psize = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_SECTOR(Sector));
+  assert_param(IS_VOLTAGERANGE(VoltageRange));
+  
+  if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
+  {
+     tmp_psize = FLASH_PSIZE_BYTE;
+  }
+  else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
+  {
+    tmp_psize = FLASH_PSIZE_HALF_WORD;
+  }
+  else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
+  {
+    tmp_psize = FLASH_PSIZE_WORD;
+  }
+  else
+  {
+    tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
+  }
+
+  /* If the previous operation is completed, proceed to erase the sector */
+  FLASH->CR &= CR_PSIZE_MASK;
+  FLASH->CR |= tmp_psize;
+  FLASH->CR &= SECTOR_MASK;
+  FLASH->CR |= FLASH_CR_SER | (Sector << POSITION_VAL(FLASH_CR_SNB));
+  FLASH->CR |= FLASH_CR_STRT;
+  
+  /* Data synchronous Barrier (DSB) Just after the write operation
+     This will force the CPU to respect the sequence of instruction (no optimization).*/
+  __DSB();
+}
+
+/**
+  * @brief  Enable the write protection of the desired bank1 or bank 2 sectors
+  *
+  * @note   When the memory read protection level is selected (RDP level = 1), 
+  *         it is not possible to program or erase the flash sector i if CortexM7  
+  *         debug features are connected or boot code is executed in RAM, even if nWRPi = 1    
+  * 
+  * @param  WRPSector: specifies the sector(s) to be write protected.
+  *          This parameter can be one of the following values:
+  *            @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_7                      
+  *            @arg OB_WRP_SECTOR_All
+  *
+  * @retval HAL FLASH State   
+  */
+static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Check the parameters */
+  assert_param(IS_OB_WRP_SECTOR(WRPSector));
+    
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    /*Write protection enabled on sectors */
+    FLASH->OPTCR &= (~WRPSector);  
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Disable the write protection of the desired bank1 or bank 2 sectors
+  *
+  * @note   When the memory read protection level is selected (RDP level = 1), 
+  *         it is not possible to program or erase the flash sector i if CortexM4  
+  *         debug features are connected or boot code is executed in RAM, even if nWRPi = 1  
+  * 
+  * @param  WRPSector: specifies the sector(s) to be write protected.
+  *          This parameter can be one of the following values:
+  *            @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_7                      
+  *            @arg OB_WRP_Sector_All
+  *
+  *
+  * @retval HAL Status   
+  */
+static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Check the parameters */
+  assert_param(IS_OB_WRP_SECTOR(WRPSector));
+    
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  {
+    /* Write protection disabled on sectors */
+    FLASH->OPTCR |= (WRPSector); 
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Set the read protection level.
+  * @param  Level: specifies the read protection level.
+  *          This parameter can be one of the following values:
+  *            @arg OB_RDP_LEVEL_0: No protection
+  *            @arg OB_RDP_LEVEL_1: Read protection of the memory
+  *            @arg OB_RDP_LEVEL_2: Full chip protection
+  *   
+  * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
+  *    
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Check the parameters */
+  assert_param(IS_OB_RDP_LEVEL(Level));
+    
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+
+  if(status == HAL_OK)
+  { 
+    *(__IO uint8_t*)OPTCR_BYTE1_ADDRESS = Level;
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.    
+  * @param  Wwdg: Selects the IWDG mode
+  *          This parameter can be one of the following values:
+  *            @arg OB_WWDG_SW: Software WWDG selected
+  *            @arg OB_WWDG_HW: Hardware WWDG selected
+  * @param  Iwdg: Selects the WWDG mode
+  *          This parameter can be one of the following values:
+  *            @arg OB_IWDG_SW: Software IWDG selected
+  *            @arg OB_IWDG_HW: Hardware IWDG selected
+  * @param  Stop: Reset event when entering STOP mode.
+  *          This parameter  can be one of the following values:
+  *            @arg OB_STOP_NO_RST: No reset generated when entering in STOP
+  *            @arg OB_STOP_RST: Reset generated when entering in STOP
+  * @param  Stdby: Reset event when entering Standby mode.
+  *          This parameter  can be one of the following values:
+  *            @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY
+  *            @arg OB_STDBY_RST: Reset generated when entering in STANDBY
+  * @param  Iwdgstop: Independent watchdog counter freeze in Stop mode.
+  *          This parameter  can be one of the following values:
+  *            @arg OB_IWDG_STOP_FREEZE: Freeze IWDG counter in STOP
+  *            @arg OB_IWDG_STOP_ACTIVE: IWDG counter active in STOP
+  * @param  Iwdgstdby: Independent watchdog counter freeze in standby mode.
+  *          This parameter  can be one of the following values:
+  *            @arg OB_IWDG_STDBY_FREEZE: Freeze IWDG counter in STANDBY
+  *            @arg OB_IWDG_STDBY_ACTIVE: IWDG counter active in STANDBY           
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_UserConfig(uint32_t Wwdg, uint32_t Iwdg, uint32_t Stop, uint32_t Stdby, uint32_t Iwdgstop, uint32_t Iwdgstdby)
+{
+  uint32_t useroptionmask = 0x00;
+  uint32_t useroptionvalue = 0x00;
+
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Check the parameters */
+  assert_param(IS_OB_WWDG_SOURCE(Wwdg));
+  assert_param(IS_OB_IWDG_SOURCE(Iwdg));
+  assert_param(IS_OB_STOP_SOURCE(Stop));
+  assert_param(IS_OB_STDBY_SOURCE(Stdby));
+  assert_param(IS_OB_IWDG_STOP_FREEZE(Iwdgstop));
+  assert_param(IS_OB_IWDG_STDBY_FREEZE(Iwdgstdby));
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+  
+  if(status == HAL_OK)
+  {
+    useroptionmask = (FLASH_OPTCR_WWDG_SW | FLASH_OPTCR_IWDG_SW | FLASH_OPTCR_nRST_STOP | \
+                      FLASH_OPTCR_nRST_STDBY | FLASH_OPTCR_IWDG_STOP | FLASH_OPTCR_IWDG_STDBY);
+                      
+    useroptionvalue = (Iwdg | Wwdg | Stop | Stdby | Iwdgstop | Iwdgstdby);
+        
+    /* Update User Option Byte */               
+    MODIFY_REG(FLASH->OPTCR, useroptionmask, useroptionvalue);
+  }
+  
+  return status; 
+
+}
+
+/**
+  * @brief  Set the BOR Level. 
+  * @param  Level: specifies the Option Bytes BOR Reset Level.
+  *          This parameter can be one of the following values:
+  *            @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
+  *            @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
+  *            @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
+  *            @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level)
+{
+  /* Check the parameters */
+  assert_param(IS_OB_BOR_LEVEL(Level));
+
+  /* Set the BOR Level */
+  MODIFY_REG(FLASH->OPTCR, FLASH_OPTCR_BOR_LEV, Level);
+  
+  return HAL_OK;
+  
+}
+
+/**
+  * @brief  Configure Boot base address.
+  * 
+  * @param   BootOption : specifies Boot base address depending from Boot pin = 0 or pin = 1
+  *          This parameter can be one of the following values:
+  *            @arg OPTIONBYTE_BOOTADDR_0 : Boot address based when Boot pin = 0                 
+  *            @arg OPTIONBYTE_BOOTADDR_1 : Boot address based when Boot pin = 1  
+  * @param   Address: specifies Boot base address
+  *          This parameter can be one of the following values:
+  *            @arg OB_BOOTADDR_ITCM_RAM : Boot from ITCM RAM (0x00000000)                 
+  *            @arg OB_BOOTADDR_SYSTEM : Boot from System memory bootloader (0x00100000) 
+  *            @arg OB_BOOTADDR_ITCM_FLASH : Boot from Flash on ITCM interface (0x00200000)  
+  *            @arg OB_BOOTADDR_AXIM_FLASH : Boot from Flash on AXIM interface (0x08000000)  
+  *            @arg OB_BOOTADDR_DTCM_RAM : Boot from DTCM RAM (0x20000000)                 
+  *            @arg OB_BOOTADDR_SRAM1 : Boot from SRAM1 (0x20010000)                    
+  *            @arg OB_BOOTADDR_SRAM2 : Boot from SRAM2 (0x2004C000)              
+  *    
+  * @retval HAL Status
+  */
+static HAL_StatusTypeDef FLASH_OB_BootAddressConfig(uint32_t BootOption, uint32_t Address)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Check the parameters */
+  assert_param(IS_OB_BOOT_ADDRESS(Address));
+    
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
+  
+  if(status == HAL_OK)
+  {
+    if(BootOption == OPTIONBYTE_BOOTADDR_0)
+    {			
+      MODIFY_REG(FLASH->OPTCR1, FLASH_OPTCR1_BOOT_ADD0, Address);
+    }
+    else
+    {
+      MODIFY_REG(FLASH->OPTCR1, FLASH_OPTCR1_BOOT_ADD1, (Address << 16));
+    }
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Return the FLASH User Option Byte value.
+  * @retval uint32_t FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1)
+  *         and RST_STDBY(Bit2).
+  */
+static uint32_t FLASH_OB_GetUser(void)
+{
+  /* Return the User Option Byte */
+  return ((uint32_t)(FLASH->OPTCR & 0xC00000F0));
+}
+
+/**
+  * @brief  Return the FLASH Write Protection Option Bytes value.
+  * @retval uint32_t FLASH Write Protection Option Bytes value
+  */
+static uint32_t FLASH_OB_GetWRP(void)
+{
+  /* Return the FLASH write protection Register value */
+  return ((uint32_t)(FLASH->OPTCR & 0x00FF0000));
+}
+
+/**
+  * @brief  Returns the FLASH Read Protection level.
+  * @retval FlagStatus FLASH ReadOut Protection Status:
+  *         This parameter can be one of the following values:
+  *            @arg OB_RDP_LEVEL_0: No protection
+  *            @arg OB_RDP_LEVEL_1: Read protection of the memory
+  *            @arg OB_RDP_LEVEL_2: Full chip protection
+  */
+static uint8_t FLASH_OB_GetRDP(void)
+{
+  uint8_t readstatus = OB_RDP_LEVEL_0;
+  
+  if ((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS)) == OB_RDP_LEVEL_0)
+  {
+    readstatus = OB_RDP_LEVEL_0;
+  }
+  else if ((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS)) == OB_RDP_LEVEL_2)
+  {
+    readstatus = OB_RDP_LEVEL_2;
+  }
+  else 
+  {
+    readstatus = OB_RDP_LEVEL_1;
+  }
+
+  return readstatus;
+}
+
+/**
+  * @brief  Returns the FLASH BOR level.
+  * @retval uint32_t The FLASH BOR level:
+  *           - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
+  *           - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
+  *           - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
+  *           - OB_BOR_OFF   : Supply voltage ranges from 1.62 to 2.1 V  
+  */
+static uint32_t FLASH_OB_GetBOR(void)
+{
+  /* Return the FLASH BOR level */
+  return ((uint32_t)(FLASH->OPTCR & 0x0C));
+}
+
+/**
+  * @brief  Configure Boot base address.
+  * 
+  * @param   BootOption : specifies Boot base address depending from Boot pin = 0 or pin = 1
+  *          This parameter can be one of the following values:
+  *            @arg OPTIONBYTE_BOOTADDR_0 : Boot address based when Boot pin = 0                 
+  *            @arg OPTIONBYTE_BOOTADDR_1 : Boot address based when Boot pin = 1       
+  *    
+  * @retval uint32_t Boot Base Address:
+  *            - OB_BOOTADDR_ITCM_RAM : Boot from ITCM RAM (0x00000000)                 
+  *            - OB_BOOTADDR_SYSTEM : Boot from System memory bootloader (0x00100000) 
+  *            - OB_BOOTADDR_ITCM_FLASH : Boot from Flash on ITCM interface (0x00200000)  
+  *            - OB_BOOTADDR_AXIM_FLASH : Boot from Flash on AXIM interface (0x08000000)  
+  *            - OB_BOOTADDR_DTCM_RAM : Boot from DTCM RAM (0x20000000)                 
+  *            - OB_BOOTADDR_SRAM1 : Boot from SRAM1 (0x20010000)                    
+  *            - OB_BOOTADDR_SRAM2 : Boot from SRAM2 (0x2004C000) 
+  */
+static uint32_t FLASH_OB_GetBootAddress(uint32_t BootOption)
+{  
+  uint32_t Address = 0;
+    
+	/* Return the Boot base Address */
+  if(BootOption == OPTIONBYTE_BOOTADDR_0)
+  {			
+    Address = FLASH->OPTCR1 & FLASH_OPTCR1_BOOT_ADD0;
+	}
+  else
+	{
+		Address = ((FLASH->OPTCR1 & FLASH_OPTCR1_BOOT_ADD1) >> 16);
+	}
+
+  return Address;
+}
+
+/**
+  * @}
+  */
+  
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_flash_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,465 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_flash_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of FLASH HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_FLASH_EX_H
+#define __STM32F7xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FLASHEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup FLASHEx_Exported_Types FLASH Exported Types
+  * @{
+  */
+
+/**
+  * @brief  FLASH Erase structure definition
+  */
+typedef struct
+{
+  uint32_t TypeErase;   /*!< Mass erase or sector Erase.
+                             This parameter can be a value of @ref FLASHEx_Type_Erase */
+
+  uint32_t Sector;      /*!< Initial FLASH sector to erase when Mass erase is disabled
+                             This parameter must be a value of @ref FLASHEx_Sectors */
+
+  uint32_t NbSectors;   /*!< Number of sectors to be erased.
+                             This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
+
+  uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
+                             This parameter must be a value of @ref FLASHEx_Voltage_Range */
+
+} FLASH_EraseInitTypeDef;
+
+/**
+  * @brief  FLASH Option Bytes Program structure definition
+  */
+typedef struct
+{
+  uint32_t OptionType;   /*!< Option byte to be configured.
+                              This parameter can be a value of @ref FLASHEx_Option_Type */
+
+  uint32_t WRPState;     /*!< Write protection activation or deactivation.
+                              This parameter can be a value of @ref FLASHEx_WRP_State */
+
+  uint32_t WRPSector;    /*!< Specifies the sector(s) to be write protected.
+                              The value of this parameter depend on device used within the same series */
+
+  uint32_t RDPLevel;     /*!< Set the read protection level.
+                              This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
+
+  uint32_t BORLevel;     /*!< Set the BOR Level.
+                              This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
+
+  uint32_t USERConfig;   /*!< Program the FLASH User Option Byte: WWDG_SW / IWDG_SW / RST_STOP / RST_STDBY / 
+                              IWDG_FREEZE_STOP / IWDG_FREEZE_SANDBY. */
+ 
+  uint32_t BootAddr0;    /*!< Boot base address when Boot pin = 0.
+                              This parameter can be a value of @ref FLASHEx_Boot_Address */
+
+  uint32_t BootAddr1;    /*!< Boot base address when Boot pin = 1.
+                              This parameter can be a value of @ref FLASHEx_Boot_Address */
+
+} FLASH_OBProgramInitTypeDef;
+
+/**
+  * @}
+  */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
+  * @{
+  */
+
+/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
+  * @{
+  */ 
+#define FLASH_TYPEERASE_SECTORS         ((uint32_t)0x00)  /*!< Sectors erase only          */
+#define FLASH_TYPEERASE_MASSERASE       ((uint32_t)0x01)  /*!< Flash Mass erase activation */
+/**
+  * @}
+  */
+  
+/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
+  * @{
+  */ 
+#define FLASH_VOLTAGE_RANGE_1        ((uint32_t)0x00)  /*!< Device operating range: 1.8V to 2.1V                */
+#define FLASH_VOLTAGE_RANGE_2        ((uint32_t)0x01)  /*!< Device operating range: 2.1V to 2.7V                */
+#define FLASH_VOLTAGE_RANGE_3        ((uint32_t)0x02)  /*!< Device operating range: 2.7V to 3.6V                */
+#define FLASH_VOLTAGE_RANGE_4        ((uint32_t)0x03)  /*!< Device operating range: 2.7V to 3.6V + External Vpp */
+/**
+  * @}
+  */
+  
+/** @defgroup FLASHEx_WRP_State FLASH WRP State
+  * @{
+  */ 
+#define OB_WRPSTATE_DISABLE       ((uint32_t)0x00)  /*!< Disable the write protection of the desired bank 1 sectors */
+#define OB_WRPSTATE_ENABLE        ((uint32_t)0x01)  /*!< Enable the write protection of the desired bank 1 sectors  */
+/**
+  * @}
+  */
+  
+/** @defgroup FLASHEx_Option_Type FLASH Option Type
+  * @{
+  */ 
+#define OPTIONBYTE_WRP         ((uint32_t)0x01)  /*!< WRP option byte configuration  */
+#define OPTIONBYTE_RDP         ((uint32_t)0x02)  /*!< RDP option byte configuration  */
+#define OPTIONBYTE_USER        ((uint32_t)0x04)  /*!< USER option byte configuration */
+#define OPTIONBYTE_BOR         ((uint32_t)0x08)  /*!< BOR option byte configuration  */
+#define OPTIONBYTE_BOOTADDR_0  ((uint32_t)0x10)  /*!< Boot 0 Address configuration   */
+#define OPTIONBYTE_BOOTADDR_1  ((uint32_t)0x20)  /*!< Boot 1 Address configuration   */
+/**
+  * @}
+  */
+  
+/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
+  * @{
+  */
+#define OB_RDP_LEVEL_0       ((uint8_t)0xAA)
+#define OB_RDP_LEVEL_1       ((uint8_t)0x55)
+#define OB_RDP_LEVEL_2       ((uint8_t)0xCC)   /*!< Warning: When enabling read protection level 2 
+                                                  it s no more possible to go back to level 1 or 0 */
+/**
+  * @}
+  */ 
+  
+/** @defgroup FLASHEx_Option_Bytes_WWatchdog FLASH Option Bytes WWatchdog
+  * @{
+  */ 
+#define OB_WWDG_SW           ((uint32_t)0x10)  /*!< Software WWDG selected */
+#define OB_WWDG_HW           ((uint32_t)0x00)  /*!< Hardware WWDG selected */
+/**
+  * @}
+  */ 
+  
+
+/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
+  * @{
+  */ 
+#define OB_IWDG_SW           ((uint32_t)0x20)  /*!< Software IWDG selected */
+#define OB_IWDG_HW           ((uint32_t)0x00)  /*!< Hardware IWDG selected */
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
+  * @{
+  */ 
+#define OB_STOP_NO_RST       ((uint32_t)0x40) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST          ((uint32_t)0x00) /*!< Reset generated when entering in STOP    */
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
+  * @{
+  */                               
+#define OB_STDBY_NO_RST      ((uint32_t)0x80) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST         ((uint32_t)0x00) /*!< Reset generated when entering in STANDBY    */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_STOP FLASH IWDG Counter Freeze in STOP
+  * @{
+  */
+#define OB_IWDG_STOP_FREEZE      ((uint32_t)0x00000000) /*!< Freeze IWDG counter in STOP mode */
+#define OB_IWDG_STOP_ACTIVE      ((uint32_t)0x80000000) /*!< IWDG counter active in STOP mode */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Option_Bytes_IWDG_FREEZE_SANDBY FLASH IWDG Counter Freeze in STANDBY
+  * @{
+  */
+#define OB_IWDG_STDBY_FREEZE      ((uint32_t)0x00000000) /*!< Freeze IWDG counter in STANDBY mode */
+#define OB_IWDG_STDBY_ACTIVE      ((uint32_t)0x40000000) /*!< IWDG counter active in STANDBY mode */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
+  * @{
+  */
+#define OB_BOR_LEVEL3          ((uint32_t)0x00)  /*!< Supply voltage ranges from 2.70 to 3.60 V */
+#define OB_BOR_LEVEL2          ((uint32_t)0x04)  /*!< Supply voltage ranges from 2.40 to 2.70 V */
+#define OB_BOR_LEVEL1          ((uint32_t)0x08)  /*!< Supply voltage ranges from 2.10 to 2.40 V */
+#define OB_BOR_OFF             ((uint32_t)0x0C)  /*!< Supply voltage ranges from 1.62 to 2.10 V */
+
+/**
+  * @}
+  */
+  
+/** @defgroup FLASHEx_Boot_Address FLASH Boot Address
+  * @{
+  */
+#define OB_BOOTADDR_ITCM_RAM         ((uint32_t)0x0000)  /*!< Boot from ITCM RAM (0x00000000)                 */
+#define OB_BOOTADDR_SYSTEM           ((uint32_t)0x0040)  /*!< Boot from System memory bootloader (0x00100000) */
+#define OB_BOOTADDR_ITCM_FLASH       ((uint32_t)0x0080)  /*!< Boot from Flash on ITCM interface (0x00200000)  */
+#define OB_BOOTADDR_AXIM_FLASH       ((uint32_t)0x2000)  /*!< Boot from Flash on AXIM interface (0x08000000)  */
+#define OB_BOOTADDR_DTCM_RAM         ((uint32_t)0x8000)  /*!< Boot from DTCM RAM (0x20000000)                 */
+#define OB_BOOTADDR_SRAM1            ((uint32_t)0x8004)  /*!< Boot from SRAM1 (0x20010000)                    */
+#define OB_BOOTADDR_SRAM2            ((uint32_t)0x8013)  /*!< Boot from SRAM2 (0x2004C000)                    */
+/**
+  * @}
+  */
+  
+/** @defgroup FLASH_Latency FLASH Latency
+  * @{
+  */
+#define FLASH_LATENCY_0                FLASH_ACR_LATENCY_0WS   /*!< FLASH Zero Latency cycle      */
+#define FLASH_LATENCY_1                FLASH_ACR_LATENCY_1WS   /*!< FLASH One Latency cycle       */
+#define FLASH_LATENCY_2                FLASH_ACR_LATENCY_2WS   /*!< FLASH Two Latency cycles      */
+#define FLASH_LATENCY_3                FLASH_ACR_LATENCY_3WS   /*!< FLASH Three Latency cycles    */
+#define FLASH_LATENCY_4                FLASH_ACR_LATENCY_4WS   /*!< FLASH Four Latency cycles     */
+#define FLASH_LATENCY_5                FLASH_ACR_LATENCY_5WS   /*!< FLASH Five Latency cycles     */
+#define FLASH_LATENCY_6                FLASH_ACR_LATENCY_6WS   /*!< FLASH Six Latency cycles      */
+#define FLASH_LATENCY_7                FLASH_ACR_LATENCY_7WS   /*!< FLASH Seven Latency cycles    */
+#define FLASH_LATENCY_8                FLASH_ACR_LATENCY_8WS   /*!< FLASH Eight Latency cycles    */
+#define FLASH_LATENCY_9                FLASH_ACR_LATENCY_9WS   /*!< FLASH Nine Latency cycles     */
+#define FLASH_LATENCY_10               FLASH_ACR_LATENCY_10WS  /*!< FLASH Ten Latency cycles      */
+#define FLASH_LATENCY_11               FLASH_ACR_LATENCY_11WS  /*!< FLASH Eleven Latency cycles   */
+#define FLASH_LATENCY_12               FLASH_ACR_LATENCY_12WS  /*!< FLASH Twelve Latency cycles   */
+#define FLASH_LATENCY_13               FLASH_ACR_LATENCY_13WS  /*!< FLASH Thirteen Latency cycles */
+#define FLASH_LATENCY_14               FLASH_ACR_LATENCY_14WS  /*!< FLASH Fourteen Latency cycles */
+#define FLASH_LATENCY_15               FLASH_ACR_LATENCY_15WS  /*!< FLASH Fifteen Latency cycles  */
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
+  * @{
+  */
+#define FLASH_MER_BIT     (FLASH_CR_MER) /*!< MER bit to clear */
+/**
+  * @}
+  */
+
+/** @defgroup FLASHEx_Sectors FLASH Sectors
+  * @{
+  */
+#define FLASH_SECTOR_0     ((uint32_t)0) /*!< Sector Number 0   */
+#define FLASH_SECTOR_1     ((uint32_t)1) /*!< Sector Number 1   */
+#define FLASH_SECTOR_2     ((uint32_t)2) /*!< Sector Number 2   */
+#define FLASH_SECTOR_3     ((uint32_t)3) /*!< Sector Number 3   */
+#define FLASH_SECTOR_4     ((uint32_t)4) /*!< Sector Number 4   */
+#define FLASH_SECTOR_5     ((uint32_t)5) /*!< Sector Number 5   */
+#define FLASH_SECTOR_6     ((uint32_t)6) /*!< Sector Number 6   */
+#define FLASH_SECTOR_7     ((uint32_t)7) /*!< Sector Number 7   */
+
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
+  * @{
+  */
+#define OB_WRP_SECTOR_0       ((uint32_t)0x00010000) /*!< Write protection of Sector0     */
+#define OB_WRP_SECTOR_1       ((uint32_t)0x00020000) /*!< Write protection of Sector1     */
+#define OB_WRP_SECTOR_2       ((uint32_t)0x00040000) /*!< Write protection of Sector2     */
+#define OB_WRP_SECTOR_3       ((uint32_t)0x00080000) /*!< Write protection of Sector3     */
+#define OB_WRP_SECTOR_4       ((uint32_t)0x00100000) /*!< Write protection of Sector4     */
+#define OB_WRP_SECTOR_5       ((uint32_t)0x00200000) /*!< Write protection of Sector5     */
+#define OB_WRP_SECTOR_6       ((uint32_t)0x00400000) /*!< Write protection of Sector6     */
+#define OB_WRP_SECTOR_7       ((uint32_t)0x00800000) /*!< Write protection of Sector7     */
+#define OB_WRP_SECTOR_All     ((uint32_t)0x00FF0000) /*!< Write protection of all Sectors */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group1
+  * @{
+  */
+/* Extension Program operation functions  *************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void              HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Constants FLASH Private Constants
+  * @{
+  */
+#define FLASH_SECTOR_TOTAL  8
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Macros FLASH Private Macros
+  * @{
+  */
+
+/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters
+  * @{
+  */
+
+#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \
+                                  ((VALUE) == FLASH_TYPEERASE_MASSERASE))  
+
+#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \
+                               ((RANGE) == FLASH_VOLTAGE_RANGE_2) || \
+                               ((RANGE) == FLASH_VOLTAGE_RANGE_3) || \
+                               ((RANGE) == FLASH_VOLTAGE_RANGE_4))  
+
+#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \
+                           ((VALUE) == OB_WRPSTATE_ENABLE))  
+
+#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP        | OPTIONBYTE_USER |\
+                                          OPTIONBYTE_BOR | OPTIONBYTE_BOOTADDR_0 | OPTIONBYTE_BOOTADDR_1)))
+
+#define IS_OB_BOOT_ADDRESS(ADDRESS) (((ADDRESS) == OB_BOOTADDR_ITCM_RAM)   || \
+                                     ((ADDRESS) == OB_BOOTADDR_SYSTEM)     || \
+                                     ((ADDRESS) == OB_BOOTADDR_ITCM_FLASH) || \
+                                     ((ADDRESS) == OB_BOOTADDR_AXIM_FLASH) || \
+                                     ((ADDRESS) == OB_BOOTADDR_DTCM_RAM)   || \
+                                     ((ADDRESS) == OB_BOOTADDR_SRAM1)      || \
+                                     ((ADDRESS) == OB_BOOTADDR_SRAM2))
+
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0)   ||\
+                                ((LEVEL) == OB_RDP_LEVEL_1)   ||\
+                                ((LEVEL) == OB_RDP_LEVEL_2))
+
+#define IS_OB_WWDG_SOURCE(SOURCE) (((SOURCE) == OB_WWDG_SW) || ((SOURCE) == OB_WWDG_HW))
+
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+
+#define IS_OB_IWDG_STOP_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STOP_FREEZE) || ((FREEZE) == OB_IWDG_STOP_ACTIVE))
+
+#define IS_OB_IWDG_STDBY_FREEZE(FREEZE) (((FREEZE) == OB_IWDG_STDBY_FREEZE) || ((FREEZE) == OB_IWDG_STDBY_ACTIVE))
+
+#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
+                                ((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
+
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0)  || \
+                                   ((LATENCY) == FLASH_LATENCY_1)  || \
+                                   ((LATENCY) == FLASH_LATENCY_2)  || \
+                                   ((LATENCY) == FLASH_LATENCY_3)  || \
+                                   ((LATENCY) == FLASH_LATENCY_4)  || \
+                                   ((LATENCY) == FLASH_LATENCY_5)  || \
+                                   ((LATENCY) == FLASH_LATENCY_6)  || \
+                                   ((LATENCY) == FLASH_LATENCY_7)  || \
+                                   ((LATENCY) == FLASH_LATENCY_8)  || \
+                                   ((LATENCY) == FLASH_LATENCY_9)  || \
+                                   ((LATENCY) == FLASH_LATENCY_10) || \
+                                   ((LATENCY) == FLASH_LATENCY_11) || \
+                                   ((LATENCY) == FLASH_LATENCY_12) || \
+                                   ((LATENCY) == FLASH_LATENCY_13) || \
+                                   ((LATENCY) == FLASH_LATENCY_14) || \
+                                   ((LATENCY) == FLASH_LATENCY_15))
+
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END))
+
+#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
+
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0)   || ((SECTOR) == FLASH_SECTOR_1)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_2)   || ((SECTOR) == FLASH_SECTOR_3)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_4)   || ((SECTOR) == FLASH_SECTOR_5)   ||\
+                                 ((SECTOR) == FLASH_SECTOR_6)   || ((SECTOR) == FLASH_SECTOR_7))
+
+#define IS_OB_WRP_SECTOR(SECTOR)  ((((SECTOR) & (uint32_t)0xFF00FFFF) == 0x00000000) && ((SECTOR) != 0x00000000))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Functions FLASH Private Functions
+  * @{
+  */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_gpio.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,543 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_gpio.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   GPIO HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the General Purpose Input/Output (GPIO) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *
+  @verbatim
+  ==============================================================================
+                    ##### GPIO Peripheral features #####
+  ==============================================================================
+  [..] 
+  Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
+  port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software
+  in several modes:
+  (+) Input mode 
+  (+) Analog mode
+  (+) Output mode
+  (+) Alternate function mode
+  (+) External interrupt/event lines
+
+  [..]  
+  During and just after reset, the alternate functions and external interrupt  
+  lines are not active and the I/O ports are configured in input floating mode.
+  
+  [..]   
+  All GPIO pins have weak internal pull-up and pull-down resistors, which can be 
+  activated or not.
+
+  [..]
+  In Output or Alternate mode, each IO can be configured on open-drain or push-pull
+  type and the IO speed can be selected depending on the VDD value.
+
+  [..]  
+  All ports have external interrupt/event capability. To use external interrupt 
+  lines, the port must be configured in input mode. All available GPIO pins are 
+  connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
+  
+  [..]
+  The external interrupt/event controller consists of up to 23 edge detectors 
+  (16 lines are connected to GPIO) for generating event/interrupt requests (each 
+  input line can be independently configured to select the type (interrupt or event) 
+  and the corresponding trigger event (rising or falling or both). Each line can 
+  also be masked independently. 
+
+                     ##### How to use this driver #####
+  ==============================================================================  
+  [..]
+    (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE(). 
+
+    (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
+        (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
+        (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef 
+             structure.
+        (++) In case of Output or alternate function mode selection: the speed is 
+             configured through "Speed" member from GPIO_InitTypeDef structure.
+        (++) In alternate mode is selection, the alternate function connected to the IO
+             is configured through "Alternate" member from GPIO_InitTypeDef structure.
+        (++) Analog mode is required when a pin is to be used as ADC channel 
+             or DAC output.
+        (++) In case of external interrupt/event selection the "Mode" member from 
+             GPIO_InitTypeDef structure select the type (interrupt or event) and 
+             the corresponding trigger event (rising or falling or both).
+
+    (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority 
+        mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
+        HAL_NVIC_EnableIRQ().
+         
+    (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
+            
+    (#) To set/reset the level of a pin configured in output mode use 
+        HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
+    
+    (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
+
+                 
+    (#) During and just after reset, the alternate functions are not 
+        active and the GPIO pins are configured in input floating mode (except JTAG
+        pins).
+  
+    (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose 
+        (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has 
+        priority over the GPIO function.
+  
+    (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as 
+        general purpose PH0 and PH1, respectively, when the HSE oscillator is off. 
+        The HSE has priority over the GPIO function.
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup GPIO GPIO
+  * @brief GPIO HAL module driver
+  * @{
+  */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup GPIO_Private_Constants GPIO Private Constants
+  * @{
+  */
+#define GPIO_MODE             ((uint32_t)0x00000003)
+#define EXTI_MODE             ((uint32_t)0x10000000)
+#define GPIO_MODE_IT          ((uint32_t)0x00010000)
+#define GPIO_MODE_EVT         ((uint32_t)0x00020000)
+#define RISING_EDGE           ((uint32_t)0x00100000)
+#define FALLING_EDGE          ((uint32_t)0x00200000)
+#define GPIO_OUTPUT_TYPE      ((uint32_t)0x00000010)
+
+#define GPIO_NUMBER           ((uint32_t)16)
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
+  * @{
+  */
+
+/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+  [..]
+    This section provides functions allowing to initialize and de-initialize the GPIOs
+    to be ready for use.
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
+  * @param  GPIOx: where x can be (A..K) to select the GPIO peripheral.
+  * @param  GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains
+  *         the configuration information for the specified GPIO peripheral.
+  * @retval None
+  */
+void HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init)
+{
+  uint32_t position = 0x00;
+  uint32_t ioposition = 0x00;
+  uint32_t iocurrent = 0x00;
+  uint32_t temp = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
+  assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
+  assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
+
+  /* Configure the port pins */
+  for(position = 0; position < GPIO_NUMBER; position++)
+  {
+    /* Get the IO position */
+    ioposition = ((uint32_t)0x01) << position;
+    /* Get the current IO position */
+    iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition;
+
+    if(iocurrent == ioposition)
+    {
+      /*--------------------- GPIO Mode Configuration ------------------------*/
+      /* In case of Alternate function mode selection */
+      if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+      {
+        /* Check the Alternate function parameter */
+        assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
+        
+        /* Configure Alternate function mapped with the current IO */
+        temp = GPIOx->AFR[position >> 3];
+        temp &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
+        temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07) * 4));
+        GPIOx->AFR[position >> 3] = temp;
+      }
+
+      /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
+      temp = GPIOx->MODER;
+      temp &= ~(GPIO_MODER_MODER0 << (position * 2));
+      temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2));
+      GPIOx->MODER = temp;
+
+      /* In case of Output or Alternate function mode selection */
+      if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
+         (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
+      {
+        /* Check the Speed parameter */
+        assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
+        /* Configure the IO Speed */
+        temp = GPIOx->OSPEEDR; 
+        temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
+        temp |= (GPIO_Init->Speed << (position * 2));
+        GPIOx->OSPEEDR = temp;
+
+        /* Configure the IO Output Type */
+        temp = GPIOx->OTYPER;
+        temp &= ~(GPIO_OTYPER_OT_0 << position) ;
+        temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4) << position);
+        GPIOx->OTYPER = temp;
+      }
+
+      /* Activate the Pull-up or Pull down resistor for the current IO */
+      temp = GPIOx->PUPDR;
+      temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
+      temp |= ((GPIO_Init->Pull) << (position * 2));
+      GPIOx->PUPDR = temp;
+
+      /*--------------------- EXTI Mode Configuration ------------------------*/
+      /* Configure the External Interrupt or event for the current IO */
+      if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
+      {
+        /* Enable SYSCFG Clock */
+        __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+        temp = SYSCFG->EXTICR[position >> 2];
+        temp &= ~(((uint32_t)0x0F) << (4 * (position & 0x03)));
+        temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03)));
+        SYSCFG->EXTICR[position >> 2] = temp;
+
+        /* Clear EXTI line configuration */
+        temp = EXTI->IMR;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->IMR = temp;
+
+        temp = EXTI->EMR;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->EMR = temp;
+
+        /* Clear Rising Falling edge configuration */
+        temp = EXTI->RTSR;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->RTSR = temp;
+
+        temp = EXTI->FTSR;
+        temp &= ~((uint32_t)iocurrent);
+        if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
+        {
+          temp |= iocurrent;
+        }
+        EXTI->FTSR = temp;
+      }
+    }
+  }
+}
+
+/**
+  * @brief  De-initializes the GPIOx peripheral registers to their default reset values.
+  * @param  GPIOx: where x can be (A..K) to select the GPIO peripheral.
+  * @param  GPIO_Pin: specifies the port bit to be written.
+  *          This parameter can be one of GPIO_PIN_x where x can be (0..15).
+  * @retval None
+  */
+void HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin)
+{
+  uint32_t position;
+  uint32_t ioposition = 0x00;
+  uint32_t iocurrent = 0x00;
+  uint32_t tmp = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
+  
+  /* Configure the port pins */
+  for(position = 0; position < GPIO_NUMBER; position++)
+  {
+    /* Get the IO position */
+    ioposition = ((uint32_t)0x01) << position;
+    /* Get the current IO position */
+    iocurrent = (GPIO_Pin) & ioposition;
+
+    if(iocurrent == ioposition)
+    {
+      /*------------------------- GPIO Mode Configuration --------------------*/
+      /* Configure IO Direction in Input Floating Mode */
+      GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2));
+
+      /* Configure the default Alternate Function in current IO */
+      GPIOx->AFR[position >> 3] &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
+
+      /* Configure the default value for IO Speed */
+      GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
+
+      /* Configure the default value IO Output Type */
+      GPIOx->OTYPER  &= ~(GPIO_OTYPER_OT_0 << position) ;
+
+      /* Deactivate the Pull-up and Pull-down resistor for the current IO */
+      GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
+
+      /*------------------------- EXTI Mode Configuration --------------------*/
+      tmp = SYSCFG->EXTICR[position >> 2];
+      tmp &= (((uint32_t)0x0F) << (4 * (position & 0x03)));
+      if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03))))
+      {
+        /* Configure the External Interrupt or event for the current IO */
+        tmp = ((uint32_t)0x0F) << (4 * (position & 0x03));
+        SYSCFG->EXTICR[position >> 2] &= ~tmp;
+
+        /* Clear EXTI line configuration */
+        EXTI->IMR &= ~((uint32_t)iocurrent);
+        EXTI->EMR &= ~((uint32_t)iocurrent);
+
+        /* Clear Rising Falling edge configuration */
+        EXTI->RTSR &= ~((uint32_t)iocurrent);
+        EXTI->FTSR &= ~((uint32_t)iocurrent);
+	  }
+    }
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions 
+ *  @brief   GPIO Read and Write
+ *
+@verbatim
+ ===============================================================================
+                       ##### IO operation functions #####
+ ===============================================================================
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Reads the specified input port pin.
+  * @param  GPIOx: where x can be (A..K) to select the GPIO peripheral.
+  * @param  GPIO_Pin: specifies the port bit to read.
+  *         This parameter can be GPIO_PIN_x where x can be (0..15).
+  * @retval The input port pin value.
+  */
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  GPIO_PinState bitstatus;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
+  {
+    bitstatus = GPIO_PIN_SET;
+  }
+  else
+  {
+    bitstatus = GPIO_PIN_RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Sets or clears the selected data port bit.
+  *
+  * @note   This function uses GPIOx_BSRR register to allow atomic read/modify
+  *         accesses. In this way, there is no risk of an IRQ occurring between
+  *         the read and the modify access.
+  *
+  * @param  GPIOx: where x can be (A..K) to select the GPIO peripheral.
+  * @param  GPIO_Pin: specifies the port bit to be written.
+  *          This parameter can be one of GPIO_PIN_x where x can be (0..15).
+  * @param  PinState: specifies the value to be written to the selected bit.
+  *          This parameter can be one of the GPIO_PinState enum values:
+  *            @arg GPIO_PIN_RESET: to clear the port pin
+  *            @arg GPIO_PIN_SET: to set the port pin
+  * @retval None
+  */
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+  assert_param(IS_GPIO_PIN_ACTION(PinState));
+
+  if(PinState != GPIO_PIN_RESET)
+  {
+    GPIOx->BSRR = GPIO_Pin;
+  }
+  else
+  {
+    GPIOx->BSRR = (uint32_t)GPIO_Pin << 16;
+  }
+}
+
+/**
+  * @brief  Toggles the specified GPIO pins.
+  * @param  GPIOx: Where x can be (A..I) to select the GPIO peripheral.
+  * @param  GPIO_Pin: Specifies the pins to be toggled.
+  * @retval None
+  */
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  GPIOx->ODR ^= GPIO_Pin;
+}
+
+/**
+  * @brief  Locks GPIO Pins configuration registers.
+  * @note   The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
+  *         GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
+  * @note   The configuration of the locked GPIO pins can no longer be modified
+  *         until the next reset.
+  * @param  GPIOx: where x can be (A..F) to select the GPIO peripheral for STM32F7 family
+  * @param  GPIO_Pin: specifies the port bit to be locked.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  __IO uint32_t tmp = GPIO_LCKR_LCKK;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+
+  /* Apply lock key write sequence */
+  tmp |= GPIO_Pin;
+  /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+  GPIOx->LCKR = tmp;
+  /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
+  GPIOx->LCKR = GPIO_Pin;
+  /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
+  GPIOx->LCKR = tmp;
+  /* Read LCKK bit*/
+  tmp = GPIOx->LCKR;
+
+ if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
+  {
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+}
+
+/**
+  * @brief  This function handles EXTI interrupt request.
+  * @param  GPIO_Pin: Specifies the pins connected EXTI line
+  * @retval None
+  */
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
+{
+  /* EXTI line interrupt detected */
+  if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
+  {
+    __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
+    HAL_GPIO_EXTI_Callback(GPIO_Pin);
+  }
+}
+
+/**
+  * @brief  EXTI line detection callbacks.
+  * @param  GPIO_Pin: Specifies the pins connected EXTI line
+  * @retval None
+  */
+__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(GPIO_Pin);
+  
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_GPIO_EXTI_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+#endif /* HAL_GPIO_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_gpio.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,327 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_gpio.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of GPIO HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_GPIO_H
+#define __STM32F7xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup GPIO
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+  * @{
+  */
+
+/** 
+  * @brief GPIO Init structure definition  
+  */ 
+typedef struct
+{
+  uint32_t Pin;       /*!< Specifies the GPIO pins to be configured.
+                           This parameter can be any value of @ref GPIO_pins_define */
+
+  uint32_t Mode;      /*!< Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref GPIO_mode_define */
+
+  uint32_t Pull;      /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+                           This parameter can be a value of @ref GPIO_pull_define */
+
+  uint32_t Speed;     /*!< Specifies the speed for the selected pins.
+                           This parameter can be a value of @ref GPIO_speed_define */
+
+  uint32_t Alternate;  /*!< Peripheral to be connected to the selected pins. 
+                            This parameter can be a value of @ref GPIO_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/** 
+  * @brief  GPIO Bit SET and Bit RESET enumeration 
+  */
+typedef enum
+{
+  GPIO_PIN_RESET = 0,
+  GPIO_PIN_SET
+}GPIO_PinState;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+  * @{
+  */ 
+
+/** @defgroup GPIO_pins_define GPIO pins define
+  * @{
+  */
+#define GPIO_PIN_0                 ((uint16_t)0x0001)  /* Pin 0 selected    */
+#define GPIO_PIN_1                 ((uint16_t)0x0002)  /* Pin 1 selected    */
+#define GPIO_PIN_2                 ((uint16_t)0x0004)  /* Pin 2 selected    */
+#define GPIO_PIN_3                 ((uint16_t)0x0008)  /* Pin 3 selected    */
+#define GPIO_PIN_4                 ((uint16_t)0x0010)  /* Pin 4 selected    */
+#define GPIO_PIN_5                 ((uint16_t)0x0020)  /* Pin 5 selected    */
+#define GPIO_PIN_6                 ((uint16_t)0x0040)  /* Pin 6 selected    */
+#define GPIO_PIN_7                 ((uint16_t)0x0080)  /* Pin 7 selected    */
+#define GPIO_PIN_8                 ((uint16_t)0x0100)  /* Pin 8 selected    */
+#define GPIO_PIN_9                 ((uint16_t)0x0200)  /* Pin 9 selected    */
+#define GPIO_PIN_10                ((uint16_t)0x0400)  /* Pin 10 selected   */
+#define GPIO_PIN_11                ((uint16_t)0x0800)  /* Pin 11 selected   */
+#define GPIO_PIN_12                ((uint16_t)0x1000)  /* Pin 12 selected   */
+#define GPIO_PIN_13                ((uint16_t)0x2000)  /* Pin 13 selected   */
+#define GPIO_PIN_14                ((uint16_t)0x4000)  /* Pin 14 selected   */
+#define GPIO_PIN_15                ((uint16_t)0x8000)  /* Pin 15 selected   */
+#define GPIO_PIN_All               ((uint16_t)0xFFFF)  /* All pins selected */
+
+#define GPIO_PIN_MASK              ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_mode_define GPIO mode define
+  * @brief GPIO Configuration Mode 
+  *        Elements values convention: 0xX0yz00YZ
+  *           - X  : GPIO mode or EXTI Mode
+  *           - y  : External IT or Event trigger detection 
+  *           - z  : IO configuration on External IT or Event
+  *           - Y  : Output type (Push Pull or Open Drain)
+  *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
+  * @{
+  */ 
+#define  GPIO_MODE_INPUT                        ((uint32_t)0x00000000)   /*!< Input Floating Mode                   */
+#define  GPIO_MODE_OUTPUT_PP                    ((uint32_t)0x00000001)   /*!< Output Push Pull Mode                 */
+#define  GPIO_MODE_OUTPUT_OD                    ((uint32_t)0x00000011)   /*!< Output Open Drain Mode                */
+#define  GPIO_MODE_AF_PP                        ((uint32_t)0x00000002)   /*!< Alternate Function Push Pull Mode     */
+#define  GPIO_MODE_AF_OD                        ((uint32_t)0x00000012)   /*!< Alternate Function Open Drain Mode    */
+
+#define  GPIO_MODE_ANALOG                       ((uint32_t)0x00000003)   /*!< Analog Mode  */
+    
+#define  GPIO_MODE_IT_RISING                    ((uint32_t)0x10110000)   /*!< External Interrupt Mode with Rising edge trigger detection          */
+#define  GPIO_MODE_IT_FALLING                   ((uint32_t)0x10210000)   /*!< External Interrupt Mode with Falling edge trigger detection         */
+#define  GPIO_MODE_IT_RISING_FALLING            ((uint32_t)0x10310000)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
+ 
+#define  GPIO_MODE_EVT_RISING                   ((uint32_t)0x10120000)   /*!< External Event Mode with Rising edge trigger detection               */
+#define  GPIO_MODE_EVT_FALLING                  ((uint32_t)0x10220000)   /*!< External Event Mode with Falling edge trigger detection              */
+#define  GPIO_MODE_EVT_RISING_FALLING           ((uint32_t)0x10320000)   /*!< External Event Mode with Rising/Falling edge trigger detection       */
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_speed_define  GPIO speed define
+  * @brief GPIO Output Maximum frequency
+  * @{
+  */  
+#define  GPIO_SPEED_FREQ_LOW         ((uint32_t)0x00000000)  /*!< Low speed     */
+#define  GPIO_SPEED_FREQ_MEDIUM      ((uint32_t)0x00000001)  /*!< Medium speed  */
+#define  GPIO_SPEED_FREQ_HIGH        ((uint32_t)0x00000002)  /*!< Fast speed    */
+#define  GPIO_SPEED_FREQ_VERY_HIGH   ((uint32_t)0x00000003)  /*!< High speed    */
+/**
+  * @}
+  */
+
+ /** @defgroup GPIO_pull_define GPIO pull define
+   * @brief GPIO Pull-Up or Pull-Down Activation
+   * @{
+   */  
+#define  GPIO_NOPULL        ((uint32_t)0x00000000)   /*!< No Pull-up or Pull-down activation  */
+#define  GPIO_PULLUP        ((uint32_t)0x00000001)   /*!< Pull-up activation                  */
+#define  GPIO_PULLDOWN      ((uint32_t)0x00000002)   /*!< Pull-down activation                */
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Checks whether the specified EXTI line flag is set or not.
+  * @param  __EXTI_LINE__: specifies the EXTI line flag to check.
+  *         This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending flags.
+  * @param  __EXTI_LINE__: specifies the EXTI lines flags to clear.
+  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+  * @brief  Checks whether the specified EXTI line is asserted or not.
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval The new state of __EXTI_LINE__ (SET or RESET).
+  */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+  * @brief  Clears the EXTI's line pending bits.
+  * @param  __EXTI_LINE__: specifies the EXTI lines to clear.
+  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+  * @brief  Generates a Software interrupt on selected EXTI line.
+  * @param  __EXTI_LINE__: specifies the EXTI line to check.
+  *          This parameter can be GPIO_PIN_x where x can be(0..15)
+  * @retval None
+  */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+/**
+  * @}
+  */
+
+/* Include GPIO HAL Extension module */
+#include "stm32f7xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void  HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void  HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);
+/**
+  * @}
+  */
+
+/** @addtogroup GPIO_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+  * @{
+  */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+#define IS_GPIO_PIN(PIN)           (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00)
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT)              ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_PP)          ||\
+                            ((MODE) == GPIO_MODE_OUTPUT_OD)          ||\
+                            ((MODE) == GPIO_MODE_AF_PP)              ||\
+                            ((MODE) == GPIO_MODE_AF_OD)              ||\
+                            ((MODE) == GPIO_MODE_IT_RISING)          ||\
+                            ((MODE) == GPIO_MODE_IT_FALLING)         ||\
+                            ((MODE) == GPIO_MODE_IT_RISING_FALLING)  ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING)         ||\
+                            ((MODE) == GPIO_MODE_EVT_FALLING)        ||\
+                            ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+                            ((MODE) == GPIO_MODE_ANALOG))
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW)  || ((SPEED) == GPIO_SPEED_MEDIUM) || \
+                              ((SPEED) == GPIO_SPEED_FAST) || ((SPEED) == GPIO_SPEED_HIGH))
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+                            ((PULL) == GPIO_PULLDOWN))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Functions GPIO Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_gpio_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,375 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_gpio_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of GPIO HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_GPIO_EX_H
+#define __STM32F7xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup GPIOEx GPIOEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
+  * @{
+  */
+  
+/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
+  * @{
+  */  
+
+/** 
+  * @brief   AF 0 selection  
+  */ 
+#define GPIO_AF0_RTC_50Hz      ((uint8_t)0x00)  /* RTC_50Hz Alternate Function mapping                       */
+#define GPIO_AF0_MCO           ((uint8_t)0x00)  /* MCO (MCO1 and MCO2) Alternate Function mapping            */
+#define GPIO_AF0_SWJ           ((uint8_t)0x00)  /* SWJ (SWD and JTAG) Alternate Function mapping             */
+#define GPIO_AF0_TRACE         ((uint8_t)0x00)  /* TRACE Alternate Function mapping                          */
+
+/** 
+  * @brief   AF 1 selection  
+  */ 
+#define GPIO_AF1_TIM1          ((uint8_t)0x01)  /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2          ((uint8_t)0x01)  /* TIM2 Alternate Function mapping */
+
+/** 
+  * @brief   AF 2 selection  
+  */ 
+#define GPIO_AF2_TIM3          ((uint8_t)0x02)  /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4          ((uint8_t)0x02)  /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5          ((uint8_t)0x02)  /* TIM5 Alternate Function mapping */
+
+/** 
+  * @brief   AF 3 selection  
+  */ 
+#define GPIO_AF3_TIM8          ((uint8_t)0x03)  /* TIM8 Alternate Function mapping  */
+#define GPIO_AF3_TIM9          ((uint8_t)0x03)  /* TIM9 Alternate Function mapping  */
+#define GPIO_AF3_TIM10         ((uint8_t)0x03)  /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11         ((uint8_t)0x03)  /* TIM11 Alternate Function mapping */
+#define GPIO_AF3_LPTIM1        ((uint8_t)0x03)  /* LPTIM1 Alternate Function mapping */
+#define GPIO_AF3_CEC           ((uint8_t)0x03)  /* CEC Alternate Function mapping */
+
+/** 
+  * @brief   AF 4 selection  
+  */ 
+#define GPIO_AF4_I2C1          ((uint8_t)0x04)  /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2          ((uint8_t)0x04)  /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3          ((uint8_t)0x04)  /* I2C3 Alternate Function mapping */
+#define GPIO_AF4_I2C4          ((uint8_t)0x04)  /* I2C4 Alternate Function mapping */
+#define GPIO_AF4_CEC           ((uint8_t)0x04)  /* CEC Alternate Function mapping */
+
+/** 
+  * @brief   AF 5 selection  
+  */ 
+#define GPIO_AF5_SPI1          ((uint8_t)0x05)  /* SPI1 Alternate Function mapping        */
+#define GPIO_AF5_SPI2          ((uint8_t)0x05)  /* SPI2/I2S2 Alternate Function mapping   */
+#define GPIO_AF5_SPI3          ((uint8_t)0x05)  /* SPI3/I2S3 Alternate Function mapping   */
+#define GPIO_AF5_SPI4          ((uint8_t)0x05)  /* SPI4 Alternate Function mapping        */
+#define GPIO_AF5_SPI5          ((uint8_t)0x05)  /* SPI5 Alternate Function mapping        */
+#define GPIO_AF5_SPI6          ((uint8_t)0x05)  /* SPI6 Alternate Function mapping        */
+
+/** 
+  * @brief   AF 6 selection  
+  */ 
+#define GPIO_AF6_SPI3          ((uint8_t)0x06)  /* SPI3/I2S3 Alternate Function mapping  */
+#define GPIO_AF6_SAI1          ((uint8_t)0x06)  /* SAI1 Alternate Function mapping       */
+
+/** 
+  * @brief   AF 7 selection  
+  */ 
+#define GPIO_AF7_USART1        ((uint8_t)0x07)  /* USART1 Alternate Function mapping     */
+#define GPIO_AF7_USART2        ((uint8_t)0x07)  /* USART2 Alternate Function mapping     */
+#define GPIO_AF7_USART3        ((uint8_t)0x07)  /* USART3 Alternate Function mapping     */
+#define GPIO_AF7_UART5         ((uint8_t)0x07)  /* UART5 Alternate Function mapping      */
+#define GPIO_AF7_SPDIFRX       ((uint8_t)0x07)  /* SPDIF-RX Alternate Function mapping   */
+#define GPIO_AF7_SPI2          ((uint8_t)0x07)  /* SPI2 Alternate Function mapping       */
+#define GPIO_AF7_SPI3          ((uint8_t)0x07)  /* SPI3 Alternate Function mapping       */
+/** 
+  * @brief   AF 8 selection  
+  */ 
+#define GPIO_AF8_UART4         ((uint8_t)0x08)  /* UART4 Alternate Function mapping  */
+#define GPIO_AF8_UART5         ((uint8_t)0x08)  /* UART5 Alternate Function mapping  */
+#define GPIO_AF8_USART6        ((uint8_t)0x08)  /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7         ((uint8_t)0x08)  /* UART7 Alternate Function mapping  */
+#define GPIO_AF8_UART8         ((uint8_t)0x08)  /* UART8 Alternate Function mapping  */
+#define GPIO_AF8_SPDIFRX       ((uint8_t)0x08)  /* SPIDIF-RX Alternate Function mapping  */
+#define GPIO_AF8_SAI2          ((uint8_t)0x08)  /* SAI2 Alternate Function mapping  */
+
+
+/** 
+  * @brief   AF 9 selection 
+  */ 
+#define GPIO_AF9_CAN1          ((uint8_t)0x09)  /* CAN1 Alternate Function mapping    */
+#define GPIO_AF9_CAN2          ((uint8_t)0x09)  /* CAN2 Alternate Function mapping    */
+#define GPIO_AF9_TIM12         ((uint8_t)0x09)  /* TIM12 Alternate Function mapping   */
+#define GPIO_AF9_TIM13         ((uint8_t)0x09)  /* TIM13 Alternate Function mapping   */
+#define GPIO_AF9_TIM14         ((uint8_t)0x09)  /* TIM14 Alternate Function mapping   */
+#define GPIO_AF9_QUADSPI       ((uint8_t)0x09)  /* QUADSPI Alternate Function mapping */
+#if defined(STM32F746xx) || defined(STM32F756xx)
+#define GPIO_AF9_LTDC          ((uint8_t)0x09)  /* LCD-TFT Alternate Function mapping */
+#endif /* STM32F746xx || STM32F756xx */
+/** 
+  * @brief   AF 10 selection  
+  */ 
+#define GPIO_AF10_OTG_FS        ((uint8_t)0xA)  /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS        ((uint8_t)0xA)  /* OTG_HS Alternate Function mapping */
+#define GPIO_AF10_QUADSPI       ((uint8_t)0xA)  /* QUADSPI Alternate Function mapping */
+#define GPIO_AF10_SAI2          ((uint8_t)0xA)  /* SAI2 Alternate Function mapping */
+
+/** 
+  * @brief   AF 11 selection  
+  */ 
+#define GPIO_AF11_ETH           ((uint8_t)0x0B)  /* ETHERNET Alternate Function mapping */
+
+/** 
+  * @brief   AF 12 selection  
+  */ 
+#define GPIO_AF12_FMC           ((uint8_t)0xC)  /* FMC Alternate Function mapping                      */
+#define GPIO_AF12_OTG_HS_FS     ((uint8_t)0xC)  /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDMMC1        ((uint8_t)0xC)  /* SDMMC1 Alternate Function mapping                     */
+
+/** 
+  * @brief   AF 13 selection  
+  */ 
+#define GPIO_AF13_DCMI          ((uint8_t)0x0D)  /* DCMI Alternate Function mapping */
+
+#if defined(STM32F746xx) || defined(STM32F756xx)
+/** 
+  * @brief   AF 14 selection  
+  */
+#define GPIO_AF14_LTDC          ((uint8_t)0x0E)  /* LCD-TFT Alternate Function mapping */
+#endif /* STM32F746xx || STM32F756xx */
+/** 
+  * @brief   AF 15 selection  
+  */ 
+#define GPIO_AF15_EVENTOUT      ((uint8_t)0x0F)  /* EVENTOUT Alternate Function mapping */
+
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
+  * @{
+  */
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/ 
+/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
+  * @{
+  */
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
+  * @{
+  */
+
+/**
+  * @brief   GPIO pin available on the platform
+  */
+/* Defines the available pins per GPIOs */
+#define GPIOA_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOB_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOC_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOD_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOE_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOF_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOG_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOI_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOJ_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOH_PIN_AVAILABLE  GPIO_PIN_All
+#define GPIOK_PIN_AVAILABLE  (GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_3 | GPIO_PIN_4 | \
+                              GPIO_PIN_5 | GPIO_PIN_6 | GPIO_PIN_7)
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
+  * @{
+  */
+/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
+  * @{
+  */
+#define GPIO_GET_INDEX(__GPIOx__)   (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+                                              ((__GPIOx__) == (GPIOB))? 1U :\
+                                              ((__GPIOx__) == (GPIOC))? 2U :\
+                                              ((__GPIOx__) == (GPIOD))? 3U :\
+                                              ((__GPIOx__) == (GPIOE))? 4U :\
+                                              ((__GPIOx__) == (GPIOF))? 5U :\
+                                              ((__GPIOx__) == (GPIOG))? 6U :\
+                                              ((__GPIOx__) == (GPIOH))? 7U :\
+                                              ((__GPIOx__) == (GPIOI))? 8U :\
+                                              ((__GPIOx__) == (GPIOJ))? 9U : 10U)			
+/**
+  * @}
+  */
+
+#define IS_GPIO_PIN_AVAILABLE(__INSTANCE__,__PIN__)  \
+           ((((__INSTANCE__) == GPIOA) && (((__PIN__) & (GPIOA_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOA_PIN_AVAILABLE)) == (GPIOA_PIN_AVAILABLE))) || \
+            (((__INSTANCE__) == GPIOB) && (((__PIN__) & (GPIOB_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOB_PIN_AVAILABLE)) == (GPIOB_PIN_AVAILABLE))) || \
+            (((__INSTANCE__) == GPIOC) && (((__PIN__) & (GPIOC_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOC_PIN_AVAILABLE)) == (GPIOC_PIN_AVAILABLE))) || \
+            (((__INSTANCE__) == GPIOD) && (((__PIN__) & (GPIOD_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOD_PIN_AVAILABLE)) == (GPIOD_PIN_AVAILABLE))) || \
+            (((__INSTANCE__) == GPIOE) && (((__PIN__) & (GPIOE_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOE_PIN_AVAILABLE)) == (GPIOE_PIN_AVAILABLE))) || \
+            (((__INSTANCE__) == GPIOF) && (((__PIN__) & (GPIOF_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOF_PIN_AVAILABLE)) == (GPIOF_PIN_AVAILABLE))) || \
+			(((__INSTANCE__) == GPIOG) && (((__PIN__) & (GPIOG_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOG_PIN_AVAILABLE)) == (GPIOG_PIN_AVAILABLE))) || \
+			(((__INSTANCE__) == GPIOI) && (((__PIN__) & (GPIOI_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOI_PIN_AVAILABLE)) == (GPIOI_PIN_AVAILABLE))) || \
+			(((__INSTANCE__) == GPIOJ) && (((__PIN__) & (GPIOJ_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOJ_PIN_AVAILABLE)) == (GPIOJ_PIN_AVAILABLE))) || \
+			(((__INSTANCE__) == GPIOK) && (((__PIN__) & (GPIOK_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOK_PIN_AVAILABLE)) == (GPIOK_PIN_AVAILABLE))) || \
+			(((__INSTANCE__) == GPIOH) && (((__PIN__) & (GPIOH_PIN_AVAILABLE)) != 0) && (((__PIN__) | (GPIOH_PIN_AVAILABLE)) == (GPIOH_PIN_AVAILABLE))))
+/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
+  * @{
+  */
+#if defined(STM32F756xx) || defined(STM32F746xx)
+#define IS_GPIO_AF(AF)   (((AF) == GPIO_AF0_RTC_50Hz)   || ((AF) == GPIO_AF1_TIM1)        || \
+                          ((AF) == GPIO_AF0_SWJ)        || ((AF) == GPIO_AF0_TRACE)      || \
+                          ((AF) == GPIO_AF0_MCO)       || ((AF) == GPIO_AF1_TIM2)       || \
+                          ((AF) == GPIO_AF2_TIM3)       || ((AF) == GPIO_AF2_TIM4)       || \
+                          ((AF) == GPIO_AF2_TIM5)       || ((AF) == GPIO_AF3_TIM8)       || \
+                          ((AF) == GPIO_AF3_TIM9)       || ((AF) == GPIO_AF3_TIM10)      || \
+                          ((AF) == GPIO_AF3_TIM11)      || ((AF) == GPIO_AF3_LPTIM1)     || \
+                          ((AF) == GPIO_AF3_CEC)        || ((AF) == GPIO_AF4_CEC)        || \
+                          ((AF) == GPIO_AF4_I2C1)       || ((AF) == GPIO_AF4_I2C2)       || \
+                          ((AF) == GPIO_AF4_I2C3)       || ((AF) == GPIO_AF4_I2C4)       || \
+                          ((AF) == GPIO_AF5_SPI1)       || ((AF) == GPIO_AF5_SPI2)       || \
+                          ((AF) == GPIO_AF5_SPI3)       || ((AF) == GPIO_AF5_SPI4)       || \
+                          ((AF) == GPIO_AF5_SPI5)       || ((AF) == GPIO_AF5_SPI6)       || \
+                          ((AF) == GPIO_AF6_SPI3)       || ((AF) == GPIO_AF6_SAI1)       || \
+                          ((AF) == GPIO_AF7_SPI3)       || ((AF) == GPIO_AF7_SPI2)        || \
+                          ((AF) == GPIO_AF7_USART1)     || ((AF) == GPIO_AF7_USART2)      || \
+                          ((AF) == GPIO_AF7_USART3)     || ((AF) == GPIO_AF7_UART5)       || \
+                          ((AF) == GPIO_AF7_SPDIFRX)    || ((AF) == GPIO_AF8_SPDIFRX)     || \
+                          ((AF) == GPIO_AF8_SAI2)       || ((AF) == GPIO_AF8_USART6)      || \
+                          ((AF) == GPIO_AF8_UART4)      || ((AF) == GPIO_AF8_UART5)       || \
+                          ((AF) == GPIO_AF8_UART7)      || ((AF) == GPIO_AF8_UART8)       || \
+                          ((AF) == GPIO_AF9_CAN1)       || ((AF) == GPIO_AF9_CAN2)        || \
+                          ((AF) == GPIO_AF9_TIM12)      || ((AF) == GPIO_AF9_TIM12)      || \
+                          ((AF) == GPIO_AF9_TIM14)      || ((AF) == GPIO_AF9_QUADSPI)    || \
+                          ((AF) == GPIO_AF9_LTDC)       || ((AF) == GPIO_AF10_OTG_FS)    || \
+                          ((AF) == GPIO_AF10_OTG_HS)    || ((AF) == GPIO_AF10_SAI2)      || \
+                          ((AF) == GPIO_AF10_QUADSPI)   || ((AF) == GPIO_AF11_ETH)       || \
+                          ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1)     || \
+                          ((AF) == GPIO_AF12_FMC)       || ((AF) == GPIO_AF15_EVENTOUT)  || \
+                          ((AF) == GPIO_AF13_DCMI)      || ((AF) == GPIO_AF14_LTDC))
+#elif defined(STM32F745xx)
+#define IS_GPIO_AF(AF)   (((AF) == GPIO_AF0_RTC_50Hz)   || ((AF) == GPIO_AF1_TIM1)        || \
+                          ((AF) == GPIO_AF0_SWJ)        || ((AF) == GPIO_AF0_TRACE)      || \
+                          ((AF) == GPIO_AF0_MCO)       || ((AF) == GPIO_AF1_TIM2)       || \
+                          ((AF) == GPIO_AF2_TIM3)       || ((AF) == GPIO_AF2_TIM4)       || \
+                          ((AF) == GPIO_AF2_TIM5)       || ((AF) == GPIO_AF3_TIM8)       || \
+                          ((AF) == GPIO_AF3_TIM9)       || ((AF) == GPIO_AF3_TIM10)      || \
+                          ((AF) == GPIO_AF3_TIM11)      || ((AF) == GPIO_AF3_LPTIM1)     || \
+                          ((AF) == GPIO_AF3_CEC)        || ((AF) == GPIO_AF4_CEC)        || \
+                          ((AF) == GPIO_AF4_I2C1)       || ((AF) == GPIO_AF4_I2C2)       || \
+                          ((AF) == GPIO_AF4_I2C3)       || ((AF) == GPIO_AF4_I2C4)       || \
+                          ((AF) == GPIO_AF5_SPI1)       || ((AF) == GPIO_AF5_SPI2)       || \
+                          ((AF) == GPIO_AF5_SPI3)       || ((AF) == GPIO_AF5_SPI4)       || \
+                          ((AF) == GPIO_AF5_SPI5)       || ((AF) == GPIO_AF5_SPI6)       || \
+                          ((AF) == GPIO_AF6_SPI3)       || ((AF) == GPIO_AF6_SAI1)       || \
+                          ((AF) == GPIO_AF7_SPI3)       || ((AF) == GPIO_AF7_SPI2)        || \
+                          ((AF) == GPIO_AF7_USART1)     || ((AF) == GPIO_AF7_USART2)      || \
+                          ((AF) == GPIO_AF7_USART3)     || ((AF) == GPIO_AF7_UART5)       || \
+                          ((AF) == GPIO_AF7_SPDIFRX)    || ((AF) == GPIO_AF8_SPDIFRX)     || \
+                          ((AF) == GPIO_AF8_SAI2)       || ((AF) == GPIO_AF8_USART6)      || \
+                          ((AF) == GPIO_AF8_UART4)      || ((AF) == GPIO_AF8_UART5)       || \
+                          ((AF) == GPIO_AF8_UART7)      || ((AF) == GPIO_AF8_UART8)       || \
+                          ((AF) == GPIO_AF9_CAN1)       || ((AF) == GPIO_AF9_CAN2)        || \
+                          ((AF) == GPIO_AF9_TIM12)      || ((AF) == GPIO_AF9_TIM12)      || \
+                          ((AF) == GPIO_AF9_TIM14)      || ((AF) == GPIO_AF9_QUADSPI)    || \
+                          ((AF) == GPIO_AF13_DCMI)      || ((AF) == GPIO_AF10_OTG_FS)    || \
+                          ((AF) == GPIO_AF10_OTG_HS)    || ((AF) == GPIO_AF10_SAI2)      || \
+                          ((AF) == GPIO_AF10_QUADSPI)   || ((AF) == GPIO_AF11_ETH)       || \
+                          ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDMMC1)     || \
+                          ((AF) == GPIO_AF12_FMC)       || ((AF) == GPIO_AF15_EVENTOUT))
+#endif /* STM32F756xx || STM32F746xx */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_hash.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1878 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_hash.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   HASH HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the HASH peripheral:
+  *           + Initialization and de-initialization functions
+  *           + HASH/HMAC Processing functions by algorithm using polling mode
+  *           + HASH/HMAC functions by algorithm using interrupt mode
+  *           + HASH/HMAC functions by algorithm using DMA mode
+  *           + Peripheral State functions
+  *         
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The HASH HAL driver can be used as follows:
+    (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit():
+        (##) Enable the HASH interface clock using __HAL_RCC_HASH_CLK_ENABLE()
+        (##) In case of using processing APIs based on interrupts (e.g. HAL_HMAC_SHA1_Start_IT())
+            (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority()
+            (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ()
+            (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler()
+        (##) In case of using DMA to control data transfer (e.g. HAL_HMAC_SHA1_Start_DMA())
+            (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+            (+++) Configure and enable one DMA stream one for managing data transfer from
+                memory to peripheral (input stream). Managing data transfer from
+                peripheral to memory can be performed only using CPU
+            (+++) Associate the initialized DMA handle to the HASH DMA handle
+                using  __HAL_LINKDMA()
+            (+++) Configure the priority and enable the NVIC for the transfer complete
+                interrupt on the DMA Stream using HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+    (#)Initialize the HASH HAL using HAL_HASH_Init(). This function configures mainly:
+        (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit.
+        (##) For HMAC, the encryption key.
+        (##) For HMAC, the key size used for encryption.
+    (#)Three processing functions are available:
+        (##) Polling mode: processing APIs are blocking functions
+             i.e. they process the data and wait till the digest computation is finished
+             e.g. HAL_HASH_SHA1_Start()
+        (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+                i.e. they process the data under interrupt
+                e.g. HAL_HASH_SHA1_Start_IT()
+        (##) DMA mode: processing APIs are not blocking functions and the CPU is
+             not used for data transfer i.e. the data transfer is ensured by DMA
+                e.g. HAL_HASH_SHA1_Start_DMA()
+    (#)When the processing function is called at first time after HAL_HASH_Init()
+       the HASH peripheral is initialized and processes the buffer in input.
+       After that, the digest computation is started.
+       When processing multi-buffer use the accumulate function to write the
+       data in the peripheral without starting the digest computation. In last 
+       buffer use the start function to input the last buffer ans start the digest
+       computation.
+       (##) e.g. HAL_HASH_SHA1_Accumulate() : write 1st data buffer in the peripheral without starting the digest computation
+       (##) write (n-1)th data buffer in the peripheral without starting the digest computation
+       (##) HAL_HASH_SHA1_Start() : write (n)th data buffer in the peripheral and start the digest computation
+    (#)In HMAC mode, there is no Accumulate API. Only Start API is available.
+    (#)In case of using DMA, call the DMA start processing e.g. HAL_HASH_SHA1_Start_DMA().
+       After that, call the finish function in order to get the digest value
+       e.g. HAL_HASH_SHA1_Finish()
+    (#)Call HAL_HASH_DeInit() to deinitialize the HASH peripheral.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+#if defined(STM32F756xx)
+
+/** @defgroup HASH HASH
+  * @brief HASH HAL module driver.
+  * @{
+  */
+#ifdef HAL_HASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup HASH_Private_Functions HASH Private Functions
+  * @{
+  */
+static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void HASH_DMAError(DMA_HandleTypeDef *hdma);
+static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size);
+static void HASH_WriteData(uint8_t *pInBuffer, uint32_t Size);
+/**
+  * @}
+  */
+  
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup HASH_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  DMA HASH Input Data complete callback. 
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+  HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  uint32_t inputaddr = 0;
+  uint32_t buffersize = 0;
+  
+  if((HASH->CR & HASH_CR_MODE) != HASH_CR_MODE)
+  {
+    /* Disable the DMA transfer */
+    HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+    
+    /* Change HASH peripheral state */
+    hhash->State = HAL_HASH_STATE_READY;
+    
+    /* Call Input data transfer complete callback */
+    HAL_HASH_InCpltCallback(hhash);
+  }
+  else
+  {
+    /* Increment Interrupt counter */
+    hhash->HashInCount++;
+    /* Disable the DMA transfer before starting the next transfer */
+    HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+    
+    if(hhash->HashInCount <= 2)
+    {
+      /* In case HashInCount = 1, set the DMA to transfer data to HASH DIN register */
+      if(hhash->HashInCount == 1)
+      {
+        inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+        buffersize = hhash->HashBuffSize;
+      }
+      /* In case HashInCount = 2, set the DMA to transfer key to HASH DIN register */
+      else if(hhash->HashInCount == 2)
+      {
+        inputaddr = (uint32_t)hhash->Init.pKey;
+        buffersize = hhash->Init.KeySize;
+      }
+      /* Configure the number of valid bits in last word of the message */
+      MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8 * (buffersize % 4));
+      
+      /* Set the HASH DMA transfer complete */
+      hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+      
+      /* Enable the DMA In DMA Stream */
+      HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (buffersize%4 ? (buffersize+3)/4:buffersize/4));
+      
+      /* Enable DMA requests */
+      HASH->CR |= (HASH_CR_DMAE);
+    }
+    else
+    {
+      /* Disable the DMA transfer */
+      HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+      
+      /* Reset the InCount */
+      hhash->HashInCount = 0;
+      
+      /* Change HASH peripheral state */
+      hhash->State = HAL_HASH_STATE_READY;
+      
+      /* Call Input data transfer complete callback */
+      HAL_HASH_InCpltCallback(hhash);
+    }
+  }
+}
+
+/**
+  * @brief  DMA HASH communication error callback. 
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void HASH_DMAError(DMA_HandleTypeDef *hdma)
+{
+  HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hhash->State= HAL_HASH_STATE_READY;
+  HAL_HASH_ErrorCallback(hhash);
+}
+
+/**
+  * @brief  Writes the input buffer in data register.
+  * @param  pInBuffer: Pointer to input buffer
+  * @param  Size: The size of input buffer
+  * @retval None
+  */
+static void HASH_WriteData(uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t buffercounter;
+  uint32_t inputaddr = (uint32_t) pInBuffer;
+  
+  for(buffercounter = 0; buffercounter < Size; buffercounter+=4)
+  {
+    HASH->DIN = *(uint32_t*)inputaddr;
+    inputaddr+=4;
+  }
+}
+
+/**
+  * @brief  Provides the message digest result.
+  * @param  pMsgDigest: Pointer to the message digest
+  * @param  Size: The size of the message digest in bytes
+  * @retval None
+  */
+static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size)
+{
+  uint32_t msgdigest = (uint32_t)pMsgDigest;
+  
+  switch(Size)
+  {
+  case 16:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    break;
+  case 20:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
+    break;
+  case 28:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
+    break;
+  case 32:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[7]);
+    break;
+  default:
+    break;
+  }
+}
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HASH_Exported_Functions
+  * @{
+  */
+  
+
+/** @addtogroup HASH_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions. 
+ *
+@verbatim    
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the HASH according to the specified parameters 
+          in the HASH_InitTypeDef and creates the associated handle.
+      (+) DeInitialize the HASH peripheral.
+      (+) Initialize the HASH MSP.
+      (+) DeInitialize HASH MSP. 
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH according to the specified parameters in the
+            HASH_HandleTypeDef and creates the associated handle.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash)
+{
+  /* Check the hash handle allocation */
+  if(hhash == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_HASH_DATATYPE(hhash->Init.DataType));
+   
+  if(hhash->State == HAL_HASH_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hhash->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_HASH_MspInit(hhash);
+  }
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Reset HashInCount, HashBuffSize and HashITCounter */
+  hhash->HashInCount = 0;
+  hhash->HashBuffSize = 0;
+  hhash->HashITCounter = 0;
+  
+  /* Set the data type */
+  HASH->CR |= (uint32_t) (hhash->Init.DataType);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+  /* Set the default HASH phase */
+  hhash->Phase = HAL_HASH_PHASE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the HASH peripheral.
+  * @note   This API must be called before starting a new processing. 
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash)
+{ 
+  /* Check the HASH handle allocation */
+  if(hhash == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Set the default HASH phase */
+  hhash->Phase = HAL_HASH_PHASE_READY;
+  
+  /* Reset HashInCount, HashBuffSize and HashITCounter */
+  hhash->HashInCount = 0;
+  hhash->HashBuffSize = 0;
+  hhash->HashITCounter = 0;
+  
+  /* DeInit the low level hardware */
+  HAL_HASH_MspDeInit(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_RESET;  
+
+  /* Release Lock */
+  __HAL_UNLOCK(hhash);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH MSP.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+__weak void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hhash);
+  
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_HASH_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes HASH MSP.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+__weak void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hhash);
+  
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_HASH_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Input data transfer complete callback.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+ __weak void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hhash);
+  
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_HASH_InCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Data transfer Error callback.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+ __weak void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hhash);
+  
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_HASH_ErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Digest computation complete callback. It is used only with interrupt.
+  * @note   This callback is not relevant with DMA.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+ __weak void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hhash);
+  
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_HASH_DgstCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Functions_Group2 HASH processing functions using polling mode 
+ *  @brief   processing functions using polling mode 
+ *
+@verbatim   
+ ===============================================================================
+              ##### HASH processing using polling mode functions#####
+ ===============================================================================  
+    [..]  This section provides functions allowing to calculate in polling mode
+          the hash value using one of the following algorithms:
+      (+) MD5
+      (+) SHA1
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in MD5 mode then processes pInBuffer.
+            The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is multiple of 64 bytes, appending the input buffer is possible.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware
+  *          and appending the input buffer is no more possible.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
+  * @param  Timeout: Timeout value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Write input buffer in data register */
+  HASH_WriteData(pInBuffer, Size);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Read the message digest */
+  HASH_GetDigest(pOutBuffer, 16);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+   
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in MD5 mode then writes the pInBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is multiple of 64 bytes, appending the input buffer is possible.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware
+  *          and appending the input buffer is no more possible.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Write input buffer in data register */
+  HASH_WriteData(pInBuffer, Size);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
+            The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).  
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @param  Timeout: Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA1 | HASH_CR_INIT;
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Write input buffer in data register */
+  HASH_WriteData(pInBuffer, Size);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Change state */
+          hhash->State = HAL_HASH_STATE_TIMEOUT;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(hhash);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  
+  /* Read the message digest */
+  HASH_GetDigest(pOutBuffer, 20);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @note  Input buffer size in bytes must be a multiple of 4 otherwise the digest computation is corrupted.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_HASH_SHA1_BUFFER_SIZE(Size));
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA1 | HASH_CR_INIT;
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Write input buffer in data register */
+  HASH_WriteData(pInBuffer, Size);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Functions_Group3 HASH processing functions using interrupt mode
+ *  @brief   processing functions using interrupt mode. 
+ *
+@verbatim   
+ ===============================================================================
+              ##### HASH processing using interrupt mode functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to calculate in interrupt mode
+          the hash value using one of the following algorithms:
+      (+) MD5
+      (+) SHA1
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in MD5 mode then processes pInBuffer.
+  *         The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).   
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  uint32_t buffercounter;
+  uint32_t inputcounter;
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  if(hhash->State == HAL_HASH_STATE_READY)
+  {
+    /* Change the HASH state */
+    hhash->State = HAL_HASH_STATE_BUSY;
+    
+    hhash->HashInCount = Size;
+    hhash->pHashInBuffPtr = pInBuffer;
+    hhash->pHashOutBuffPtr = pOutBuffer;
+    
+    /* Check if initialization phase has already been performed */
+    if(hhash->Phase == HAL_HASH_PHASE_READY)
+    {
+      /* Select the SHA1 mode */
+      HASH->CR |= HASH_ALGOSELECTION_MD5;
+      /* Reset the HASH processor core, so that the HASH will be ready to compute 
+         the message digest of a new message */
+      HASH->CR |= HASH_CR_INIT;
+    }
+    
+    /* Reset interrupt counter */
+    hhash->HashITCounter = 0;
+    
+    /* Set the phase */
+    hhash->Phase = HAL_HASH_PHASE_PROCESS;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hhash);
+    
+    /* Enable Interrupts */
+    HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+  {
+    outputaddr = (uint32_t)hhash->pHashOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[0]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[1]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[2]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[3]);
+    
+    if(hhash->HashInCount == 0)
+    {
+      /* Disable Interrupts */
+      HASH->IMR = 0;
+      /* Change the HASH state */
+      hhash->State = HAL_HASH_STATE_READY;
+      /* Call digest computation complete callback */
+      HAL_HASH_DgstCpltCallback(hhash);
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hhash);
+      
+      /* Return function status */
+      return HAL_OK;
+    }
+  }
+  
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+  {
+    if(hhash->HashInCount >= 68)
+    {
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < 64; buffercounter+=4)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      if(hhash->HashITCounter == 0)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+
+        if(hhash->HashInCount >= 68)
+        {
+          /* Decrement buffer counter */
+          hhash->HashInCount -= 68;
+          hhash->pHashInBuffPtr+= 68;
+        }
+        else
+        {
+          hhash->HashInCount = 0;
+          hhash->pHashInBuffPtr+= hhash->HashInCount;
+        }
+        /* Set Interrupt counter */
+        hhash->HashITCounter = 1;
+      }
+      else
+      {
+        /* Decrement buffer counter */
+        hhash->HashInCount -= 64;
+        hhash->pHashInBuffPtr+= 64;
+      }
+    }
+    else
+    {
+      /* Get the buffer address */
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Get the buffer counter */
+      inputcounter = hhash->HashInCount;
+      /* Disable Interrupts */
+      HASH->IMR &= ~(HASH_IT_DINI);
+      /* Configure the number of valid bits in last word of the message */
+      __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+      
+      if((inputcounter > 4) && (inputcounter%4))
+      {
+        inputcounter = (inputcounter+4-inputcounter%4);
+      }
+      else if ((inputcounter < 4) && (inputcounter != 0))
+      {
+        inputcounter = 4;
+      }
+      
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < inputcounter/4; buffercounter++)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      /* Start the digest calculation */
+      __HAL_HASH_START_DIGEST();
+      /* Reset buffer counter */
+      hhash->HashInCount = 0;
+      /* Call Input data transfer complete callback */
+      HAL_HASH_InCpltCallback(hhash);
+    }
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
+  *         The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed). 
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+  uint32_t inputaddr;
+  uint32_t outputaddr;
+  uint32_t buffercounter;
+  uint32_t inputcounter;
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  if(hhash->State == HAL_HASH_STATE_READY)
+  {
+    /* Change the HASH state */
+    hhash->State = HAL_HASH_STATE_BUSY;
+    
+    hhash->HashInCount = Size;
+    hhash->pHashInBuffPtr = pInBuffer;
+    hhash->pHashOutBuffPtr = pOutBuffer;
+    
+    /* Check if initialization phase has already been performed */
+    if(hhash->Phase == HAL_HASH_PHASE_READY)
+    {
+      /* Select the SHA1 mode */
+      HASH->CR |= HASH_ALGOSELECTION_SHA1;
+      /* Reset the HASH processor core, so that the HASH will be ready to compute 
+         the message digest of a new message */
+      HASH->CR |= HASH_CR_INIT;
+    }
+    
+    /* Reset interrupt counter */
+    hhash->HashITCounter = 0;
+    
+    /* Set the phase */
+    hhash->Phase = HAL_HASH_PHASE_PROCESS;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hhash);
+    
+    /* Enable Interrupts */
+    HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+  {
+    outputaddr = (uint32_t)hhash->pHashOutBuffPtr;
+    /* Read the Output block from the Output FIFO */
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[0]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[1]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[2]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[3]);
+    outputaddr+=4;
+    *(uint32_t*)(outputaddr) = __REV(HASH->HR[4]);
+    if(hhash->HashInCount == 0)
+    {
+      /* Disable Interrupts */
+      HASH->IMR = 0;
+      /* Change the HASH state */
+      hhash->State = HAL_HASH_STATE_READY;
+      /* Call digest computation complete callback */
+      HAL_HASH_DgstCpltCallback(hhash);
+            
+      /* Process Unlocked */
+      __HAL_UNLOCK(hhash);
+      
+      /* Return function status */
+      return HAL_OK;
+    }
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+  {
+    if(hhash->HashInCount >= 68)
+    {
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < 64; buffercounter+=4)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      if(hhash->HashITCounter == 0)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+      
+        if(hhash->HashInCount >= 68)
+        {
+          /* Decrement buffer counter */
+          hhash->HashInCount -= 68;
+          hhash->pHashInBuffPtr+= 68;
+        }
+        else
+        {
+          hhash->HashInCount = 0;
+          hhash->pHashInBuffPtr+= hhash->HashInCount;
+        }
+        /* Set Interrupt counter */
+        hhash->HashITCounter = 1;
+      }
+      else
+      {
+        /* Decrement buffer counter */
+        hhash->HashInCount -= 64;
+        hhash->pHashInBuffPtr+= 64;
+      }
+    }
+    else
+    {
+      /* Get the buffer address */
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Get the buffer counter */
+      inputcounter = hhash->HashInCount;
+      /* Disable Interrupts */
+      HASH->IMR &= ~(HASH_IT_DINI);
+      /* Configure the number of valid bits in last word of the message */
+      __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+      
+      if((inputcounter > 4) && (inputcounter%4))
+      {
+        inputcounter = (inputcounter+4-inputcounter%4);
+      }
+      else if ((inputcounter < 4) && (inputcounter != 0))
+      {
+        inputcounter = 4;
+      }
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < inputcounter/4; buffercounter++)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      /* Start the digest calculation */
+      __HAL_HASH_START_DIGEST();
+      /* Reset buffer counter */
+      hhash->HashInCount = 0;
+      /* Call Input data transfer complete callback */
+      HAL_HASH_InCpltCallback(hhash);
+    }
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief This function handles HASH interrupt request.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash)
+{
+  switch(HASH->CR & HASH_CR_ALGO)
+  {
+    case HASH_ALGOSELECTION_MD5:
+       HAL_HASH_MD5_Start_IT(hhash, NULL, 0, NULL);
+    break;
+    
+    case HASH_ALGOSELECTION_SHA1:
+      HAL_HASH_SHA1_Start_IT(hhash, NULL, 0, NULL);
+    break;
+    
+    default:
+    break;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Functions_Group4 HASH processing functions using DMA mode
+ *  @brief   processing functions using DMA mode. 
+ *
+@verbatim   
+ ===============================================================================
+              ##### HASH processing using DMA mode functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to calculate in DMA mode
+          the hash value using one of the following algorithms:
+      (+) MD5
+      (+) SHA1
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in MD5 mode then enables DMA to
+            control data transfer. Use HAL_HASH_MD5_Finish() to get the digest.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr  = (uint32_t)pInBuffer;
+  
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
+  }
+   
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+    
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASH_DMAError;
+  
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4 ? (Size+3)/4:Size/4));
+  
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+  
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the computed digest in MD5 mode
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
+  * @param  Timeout: Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Read the message digest */
+  HASH_GetDigest(pOutBuffer, 16);
+      
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA1 mode then enables DMA to
+            control data transfer. Use HAL_HASH_SHA1_Finish() to get the digest.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr  = (uint32_t)pInBuffer;
+  
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA1;
+    HASH->CR |= HASH_CR_INIT;
+  }
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASH_DMAError;
+  
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4 ? (Size+3)/4:Size/4));
+  
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+  
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the computed digest in SHA1 mode.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.  
+  * @param  Timeout: Timeout value    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Read the message digest */
+  HASH_GetDigest(pOutBuffer, 20);
+  
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+   /* Process UnLock */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Functions_Group5 HASH-MAC (HMAC) processing functions using polling mode 
+ *  @brief   HMAC processing functions using polling mode . 
+ *
+@verbatim   
+ ===============================================================================
+              ##### HMAC processing using polling mode functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to calculate in polling mode
+          the HMAC value using one of the following algorithms:
+      (+) MD5
+      (+) SHA1
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC MD5 mode
+  *         then processes pInBuffer. The digest is available in pOutBuffer
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @param  Timeout: Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC MD5 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+    }
+    else
+    {
+      /* Select the HMAC MD5 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+    }
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /************************** STEP 1 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+  
+  /* Write input buffer in data register */
+  HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 2 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Write input buffer in data register */
+  HASH_WriteData(pInBuffer, Size);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 3 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+  
+  /* Write input buffer in data register */
+  HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Read the message digest */
+  HASH_GetDigest(pOutBuffer, 16);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC SHA1 mode
+  *         then processes pInBuffer. The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param   Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @param  Timeout: Timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC SHA1 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+    }
+    else
+    {
+      /* Select the HMAC SHA1 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+    }
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /************************** STEP 1 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+  
+  /* Write input buffer in data register */
+  HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 2 ******************************************/
+  /* Configure the number of valid bits in last word of the message */  
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Write input buffer in data register */
+  HASH_WriteData(pInBuffer, Size);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 3 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+  
+  /* Write input buffer in data register */
+  HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /* Read the message digest */
+  HASH_GetDigest(pOutBuffer, 20);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Functions_Group6 HASH-MAC (HMAC) processing functions using DMA mode 
+ *  @brief   HMAC processing functions using DMA mode . 
+ *
+@verbatim   
+ ===============================================================================
+                ##### HMAC processing using DMA mode functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to calculate in DMA mode
+          the HMAC value using one of the following algorithms:
+      (+) MD5
+      (+) SHA1
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC MD5 mode
+  *         then enables DMA to control data transfer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr  = 0;
+  
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Save buffer pointer and size in handle */
+  hhash->pHashInBuffPtr = pInBuffer;
+  hhash->HashBuffSize = Size;
+  hhash->HashInCount = 0;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC MD5 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+    }
+    else
+    {
+      /* Select the HMAC MD5 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+    }
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+  
+  /* Get the key address */
+  inputaddr = (uint32_t)(hhash->Init.pKey);
+  
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASH_DMAError;
+  
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4 ? (hhash->Init.KeySize+3)/4:hhash->Init.KeySize/4));
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC SHA1 mode
+  *         then enables DMA to control data transfer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr  = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Save buffer pointer and size in handle */
+  hhash->pHashInBuffPtr = pInBuffer;
+  hhash->HashBuffSize = Size;
+  hhash->HashInCount = 0;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC SHA1 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+    }
+    else
+    {
+      /* Select the HMAC SHA1 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+    }
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+  
+  /* Get the key address */
+  inputaddr = (uint32_t)(hhash->Init.pKey);
+  
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASH_DMAError;
+  
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4 ? (hhash->Init.KeySize+3)/4:hhash->Init.KeySize/4));
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Functions_Group7 Peripheral State functions 
+ *  @brief   Peripheral State functions. 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral State functions #####
+ ===============================================================================  
+    [..]
+    This subsection permits to get in run-time the status of the peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief return the HASH state
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval HAL state
+  */
+HAL_HASH_StateTypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash)
+{
+  return hhash->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+#endif /* STM32F756xx */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_hash.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,450 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_hash.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of HASH HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_HASH_H
+#define __STM32F7xx_HAL_HASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F756xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HASH    
+  * @brief HASH HAL module driver 
+  *  @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HASH_Exported_Types HASH Exported Types
+  * @{
+  */
+
+/** @defgroup HASH_Exported_Types_Group1 HASH Configuration Structure definition
+  * @{
+  */
+
+typedef struct
+{
+  uint32_t DataType;  /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+                           This parameter can be a value of @ref HASH_Data_Type */
+
+  uint32_t KeySize;   /*!< The key size is used only in HMAC operation          */
+
+  uint8_t* pKey;      /*!< The key is used only in HMAC operation               */
+}HASH_InitTypeDef;
+
+/** 
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Types_Group2 HASH State structures definition
+  * @{
+  */
+
+typedef enum
+{
+  HAL_HASH_STATE_RESET     = 0x00,  /*!< HASH not yet initialized or disabled */
+  HAL_HASH_STATE_READY     = 0x01,  /*!< HASH initialized and ready for use   */
+  HAL_HASH_STATE_BUSY      = 0x02,  /*!< HASH internal process is ongoing     */
+  HAL_HASH_STATE_TIMEOUT   = 0x03,  /*!< HASH timeout state                   */
+  HAL_HASH_STATE_ERROR     = 0x04   /*!< HASH error state                     */
+}HAL_HASH_StateTypeDef;
+
+/** 
+  * @}
+  */
+  
+/** @defgroup HASH_Exported_Types_Group3 HASH phase structures definition
+  * @{
+  */
+  
+typedef enum
+{
+  HAL_HASH_PHASE_READY     = 0x01,  /*!< HASH peripheral is ready for initialization */
+  HAL_HASH_PHASE_PROCESS   = 0x02,  /*!< HASH peripheral is in processing phase      */
+}HAL_HASHPhaseTypeDef;
+
+/** 
+  * @}
+  */
+ 
+/** @defgroup HASH_Exported_Types_Group4 HASH Handle structures definition
+  * @{
+  */ 
+  
+typedef struct
+{
+      HASH_InitTypeDef           Init;              /*!< HASH required parameters       */
+
+      uint8_t                    *pHashInBuffPtr;   /*!< Pointer to input buffer        */
+
+      uint8_t                    *pHashOutBuffPtr;  /*!< Pointer to input buffer        */
+
+     __IO uint32_t               HashBuffSize;      /*!< Size of buffer to be processed */
+
+     __IO uint32_t               HashInCount;       /*!< Counter of inputed data        */
+
+     __IO uint32_t               HashITCounter;     /*!< Counter of issued interrupts   */
+
+      HAL_StatusTypeDef          Status;            /*!< HASH peripheral status         */
+
+      HAL_HASH_PhaseTypeDef       Phase;             /*!< HASH peripheral phase          */
+
+      DMA_HandleTypeDef          *hdmain;           /*!< HASH In DMA handle parameters  */
+
+      HAL_LockTypeDef            Lock;              /*!< HASH locking object            */
+
+     __IO HAL_HASH_StateTypeDef  State;             /*!< HASH peripheral state          */
+} HASH_HandleTypeDef;
+
+/** 
+  * @}
+  */
+  
+
+/**
+  * @}
+  */ 
+  
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HASH_Exported_Constants HASH Exported Constants
+  * @{
+  */
+
+/** @defgroup HASH_Exported_Constants_Group1 HASH Algorithm Selection
+  * @{
+  */
+#define HASH_ALGOSELECTION_SHA1      ((uint32_t)0x0000)  /*!< HASH function is SHA1   */
+#define HASH_ALGOSELECTION_SHA224    HASH_CR_ALGO_1      /*!< HASH function is SHA224 */
+#define HASH_ALGOSELECTION_SHA256    HASH_CR_ALGO        /*!< HASH function is SHA256 */
+#define HASH_ALGOSELECTION_MD5       HASH_CR_ALGO_0      /*!< HASH function is MD5    */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Constants_Group2 HASH Algorithm Mode
+  * @{
+  */
+#define HASH_ALGOMODE_HASH         ((uint32_t)0x00000000)  /*!< Algorithm is HASH */ 
+#define HASH_ALGOMODE_HMAC         HASH_CR_MODE            /*!< Algorithm is HMAC */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Data_Type HASH Data Type
+  * @{
+  */
+#define HASH_DATATYPE_32B          ((uint32_t)0x0000) /*!< 32-bit data. No swapping                     */
+#define HASH_DATATYPE_16B          HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped       */
+#define HASH_DATATYPE_8B           HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped            */
+#define HASH_DATATYPE_1B           HASH_CR_DATATYPE   /*!< 1-bit data. In the word all bits are swapped */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Constants_Group4 HASH HMAC Long key 
+  * @brief HASH HMAC Long key used only for HMAC mode
+  * @{
+  */
+#define HASH_HMAC_KEYTYPE_SHORTKEY      ((uint32_t)0x00000000)  /*!< HMAC Key is <= 64 bytes */
+#define HASH_HMAC_KEYTYPE_LONGKEY       HASH_CR_LKEY            /*!< HMAC Key is > 64 bytes  */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Constants_Group5 HASH Flags definition 
+  * @{
+  */
+#define HASH_FLAG_DINIS            HASH_SR_DINIS  /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer */
+#define HASH_FLAG_DCIS             HASH_SR_DCIS   /*!< Digest calculation complete                                                         */
+#define HASH_FLAG_DMAS             HASH_SR_DMAS   /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing                          */
+#define HASH_FLAG_BUSY             HASH_SR_BUSY   /*!< The hash core is Busy : processing a block of data                                  */
+#define HASH_FLAG_DINNE            HASH_CR_DINNE  /*!< DIN not empty : The input buffer contains at least one word of data                 */
+/**
+  * @}
+  */
+
+/** @defgroup HASH_Exported_Constants_Group6 HASH Interrupts definition 
+  * @{
+  */
+#define HASH_IT_DINI               HASH_IMR_DINIE  /*!< A new block can be entered into the input buffer (DIN) */
+#define HASH_IT_DCI                HASH_IMR_DCIE   /*!< Digest calculation complete                            */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HASH_Exported_Macros HASH Exported Macros
+  * @{
+  */
+  
+/** @brief Reset HASH handle state
+  * @param  __HANDLE__: specifies the HASH handle.
+  * @retval None
+  */
+#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HASH_STATE_RESET)
+
+/** @brief  Check whether the specified HASH flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg HASH_FLAG_DINIS: A new block can be entered into the input buffer. 
+  *            @arg HASH_FLAG_DCIS: Digest calculation complete
+  *            @arg HASH_FLAG_DMAS: DMA interface is enabled (DMAE=1) or a transfer is ongoing
+  *            @arg HASH_FLAG_BUSY: The hash core is Busy : processing a block of data
+  *            @arg HASH_FLAG_DINNE: DIN not empty : The input buffer contains at least one word of data
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_HASH_GET_FLAG(__FLAG__) (((__FLAG__) > 8U) ? ((HASH->CR & (__FLAG__)) == (__FLAG__)) :\
+                                                           ((HASH->SR & (__FLAG__)) == (__FLAG__)))
+
+/**
+  * @brief  Enable the multiple DMA mode. 
+  *         This feature is available only in STM32F429x and STM32F439x devices.
+  * @retval None
+  */
+#define __HAL_HASH_SET_MDMAT()          HASH->CR |= HASH_CR_MDMAT
+
+/**
+  * @brief  Disable the multiple DMA mode.
+  * @retval None
+  */
+#define __HAL_HASH_RESET_MDMAT()        HASH->CR &= (uint32_t)(~HASH_CR_MDMAT)
+
+/**
+  * @brief  Start the digest computation
+  * @retval None
+  */
+#define __HAL_HASH_START_DIGEST()       HASH->STR |= HASH_STR_DCAL
+
+/**
+  * @brief Set the number of valid bits in last word written in Data register
+  * @param  SIZE: size in byte of last data written in Data register.
+  * @retval None
+*/
+#define __HAL_HASH_SET_NBVALIDBITS(SIZE) do{HASH->STR &= ~(HASH_STR_NBW);\
+                                            HASH->STR |= 8 * ((SIZE) % 4);\
+                                           }while(0)
+
+/**
+  * @}
+  */ 
+
+/* Include HASH HAL Extension module */
+#include "stm32f7xx_hal_hash_ex.h"
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HASH_Exported_Functions HASH Exported Functions
+  * @{
+  */
+
+/** @addtogroup HASH_Exported_Functions_Group1
+  * @{
+  */  
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash);
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash);
+/**
+  * @}
+  */ 
+
+/** @addtogroup HASH_Exported_Functions_Group2
+  * @{
+  */  
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+  * @}
+  */ 
+  
+/** @addtogroup HASH_Exported_Functions_Group3
+  * @{
+  */  
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+/**
+  * @}
+  */ 
+
+/** @addtogroup HASH_Exported_Functions_Group4
+  * @{
+  */  
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+/**
+  * @}
+  */ 
+
+/** @addtogroup HASH_Exported_Functions_Group5
+  * @{
+  */    
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+/**
+  * @}
+  */ 
+
+/** @addtogroup HASH_Exported_Functions_Group6
+  * @{
+  */  
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+  * @}
+  */ 
+
+/** @addtogroup HASH_Exported_Functions_Group7
+  * @{
+  */  
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash);
+/**
+  * @}
+  */ 
+
+/** @addtogroup HASH_Exported_Functions_Group8
+  * @{
+  */
+HAL_HASH_StateTypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash);
+/**
+  * @}
+  */ 
+  
+ /**
+  * @}
+  */ 
+ 
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup HASH_Private_Types HASH Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Variables HASH Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Constants HASH Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HASH_Private_Macros HASH Private Macros
+  * @{
+  */
+#define IS_HASH_ALGOSELECTION(__ALGOSELECTION__) (((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA1)   || \
+                                                  ((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA224) || \
+                                                  ((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA256) || \
+                                                  ((__ALGOSELECTION__) == HASH_ALGOSELECTION_MD5))
+
+
+#define IS_HASH_ALGOMODE(__ALGOMODE__) (((__ALGOMODE__) == HASH_ALGOMODE_HASH) || \
+                                        ((__ALGOMODE__) == HASH_ALGOMODE_HMAC))
+
+
+#define IS_HASH_DATATYPE(__DATATYPE__) (((__DATATYPE__) == HASH_DATATYPE_32B)|| \
+                                        ((__DATATYPE__) == HASH_DATATYPE_16B)|| \
+                                        ((__DATATYPE__) == HASH_DATATYPE_8B) || \
+                                        ((__DATATYPE__) == HASH_DATATYPE_1B))
+
+
+#define IS_HASH_HMAC_KEYTYPE(__KEYTYPE__) (((__KEYTYPE__) == HASH_HMAC_KEYTYPE_SHORTKEY) || \
+                                           ((__KEYTYPE__) == HASH_HMAC_KEYTYPE_LONGKEY))
+                                           
+#define IS_HASH_SHA1_BUFFER_SIZE(__SIZE__) ((((__SIZE__)%4) != 0)? 0U: 1U)
+
+
+/**
+  * @}
+  */ 
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Functions HASH Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+ 
+/**
+  * @}
+  */ 
+#endif /* STM32F756xx */
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_HASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_hash_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1636 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_hash_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   HASH HAL Extension module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of HASH peripheral:
+  *           + Extended HASH processing functions based on SHA224 Algorithm
+  *           + Extended HASH processing functions based on SHA256 Algorithm
+  *         
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The HASH HAL driver can be used as follows:
+    (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit():
+        (##) Enable the HASH interface clock using __HAL_RCC_HASH_CLK_ENABLE()
+        (##) In case of using processing APIs based on interrupts (e.g. HAL_HMACEx_SHA224_Start())
+            (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority()
+            (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ()
+            (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler()
+        (##) In case of using DMA to control data transfer (e.g. HAL_HMACEx_SH224_Start_DMA())
+            (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
+            (+++) Configure and enable one DMA stream one for managing data transfer from
+                memory to peripheral (input stream). Managing data transfer from
+                peripheral to memory can be performed only using CPU
+            (+++) Associate the initialized DMA handle to the HASH DMA handle
+                using  __HAL_LINKDMA()
+            (+++) Configure the priority and enable the NVIC for the transfer complete
+                interrupt on the DMA Stream: HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
+    (#)Initialize the HASH HAL using HAL_HASH_Init(). This function configures mainly:
+        (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit.
+        (##) For HMAC, the encryption key.
+        (##) For HMAC, the key size used for encryption.
+    (#)Three processing functions are available:
+        (##) Polling mode: processing APIs are blocking functions
+             i.e. they process the data and wait till the digest computation is finished
+             e.g. HAL_HASHEx_SHA224_Start()
+        (##) Interrupt mode: encryption and decryption APIs are not blocking functions
+                i.e. they process the data under interrupt
+                e.g. HAL_HASHEx_SHA224_Start_IT()
+        (##) DMA mode: processing APIs are not blocking functions and the CPU is
+             not used for data transfer i.e. the data transfer is ensured by DMA
+                e.g. HAL_HASHEx_SHA224_Start_DMA()
+    (#)When the processing function is called at first time after HAL_HASH_Init()
+       the HASH peripheral is initialized and processes the buffer in input.
+       After that, the digest computation is started.
+       When processing multi-buffer use the accumulate function to write the
+       data in the peripheral without starting the digest computation. In last 
+       buffer use the start function to input the last buffer ans start the digest
+       computation.
+       (##) e.g. HAL_HASHEx_SHA224_Accumulate() : write 1st data buffer in the peripheral without starting the digest computation
+       (##)  write (n-1)th data buffer in the peripheral without starting the digest computation
+       (##)  HAL_HASHEx_SHA224_Start() : write (n)th data buffer in the peripheral and start the digest computation
+    (#)In HMAC mode, there is no Accumulate API. Only Start API is available.
+    (#)In case of using DMA, call the DMA start processing e.g. HAL_HASHEx_SHA224_Start_DMA().
+       After that, call the finish function in order to get the digest value
+       e.g. HAL_HASHEx_SHA224_Finish()
+    (#)Call HAL_HASH_DeInit() to deinitialize the HASH peripheral.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+#if defined(STM32F756xx)
+
+/** @defgroup HASHEx HASHEx
+  * @brief HASH Extension HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup HASHEx_Private_Functions
+  * @{
+  */
+static void HASHEx_DMAXferCplt(DMA_HandleTypeDef *hdma);
+static void HASHEx_WriteData(uint8_t *pInBuffer, uint32_t Size);
+static void HASHEx_GetDigest(uint8_t *pMsgDigest, uint8_t Size);
+static void HASHEx_DMAError(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+  
+/* Private functions ---------------------------------------------------------*/
+
+/** @addtogroup HASHEx_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Writes the input buffer in data register.
+  * @param  pInBuffer: Pointer to input buffer
+  * @param  Size: The size of input buffer
+  * @retval None
+  */
+static void HASHEx_WriteData(uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t buffercounter;
+  uint32_t inputaddr = (uint32_t) pInBuffer;
+  
+  for(buffercounter = 0; buffercounter < Size; buffercounter+=4)
+  {
+    HASH->DIN = *(uint32_t*)inputaddr;
+    inputaddr+=4;
+  }
+}
+
+/**
+  * @brief  Provides the message digest result.
+  * @param  pMsgDigest: Pointer to the message digest
+  * @param  Size: The size of the message digest in bytes
+  * @retval None
+  */
+static void HASHEx_GetDigest(uint8_t *pMsgDigest, uint8_t Size)
+{
+  uint32_t msgdigest = (uint32_t)pMsgDigest;
+  
+  switch(Size)
+  {
+  case 16:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    break;
+  case 20:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
+    break;
+  case 28:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
+    break;
+  case 32:
+    /* Read the message digest */
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
+    msgdigest+=4;
+    *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[7]);
+    break;
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  DMA HASH Input Data complete callback. 
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void HASHEx_DMAXferCplt(DMA_HandleTypeDef *hdma)
+{
+  HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  uint32_t inputaddr = 0;
+  uint32_t buffersize = 0;
+  
+  if((HASH->CR & HASH_CR_MODE) != HASH_CR_MODE)
+  {
+    /* Disable the DMA transfer */
+    HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+    
+    /* Change HASH peripheral state */
+    hhash->State = HAL_HASH_STATE_READY;
+    
+    /* Call Input data transfer complete callback */
+    HAL_HASH_InCpltCallback(hhash);
+  }
+  else
+  {
+    /* Increment Interrupt counter */
+    hhash->HashInCount++;
+    /* Disable the DMA transfer before starting the next transfer */
+    HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+    
+    if(hhash->HashInCount <= 2)
+    {
+      /* In case HashInCount = 1, set the DMA to transfer data to HASH DIN register */
+      if(hhash->HashInCount == 1)
+      {
+        inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+        buffersize = hhash->HashBuffSize;
+      }
+      /* In case HashInCount = 2, set the DMA to transfer key to HASH DIN register */
+      else if(hhash->HashInCount == 2)
+      {
+        inputaddr = (uint32_t)hhash->Init.pKey;
+        buffersize = hhash->Init.KeySize;
+      }
+      /* Configure the number of valid bits in last word of the message */
+      MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8 * (buffersize % 4));
+      
+      /* Set the HASH DMA transfer complete */
+      hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+      
+      /* Enable the DMA In DMA Stream */
+      HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (buffersize%4 ? (buffersize+3)/4:buffersize/4));
+      
+      /* Enable DMA requests */
+      HASH->CR |= (HASH_CR_DMAE);
+    }
+    else
+    {
+      /* Disable the DMA transfer */
+      HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
+      
+      /* Reset the InCount */
+      hhash->HashInCount = 0;
+      
+      /* Change HASH peripheral state */
+      hhash->State = HAL_HASH_STATE_READY;
+      
+      /* Call Input data transfer complete callback */
+      HAL_HASH_InCpltCallback(hhash);
+    }
+  }
+}
+
+/**
+  * @brief  DMA HASH communication error callback. 
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void HASHEx_DMAError(DMA_HandleTypeDef *hdma)
+{
+  HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hhash->State= HAL_HASH_STATE_READY;
+  HAL_HASH_ErrorCallback(hhash);
+}
+
+ /**
+  * @}
+  */
+  
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HASHEx_Exported_Functions
+  * @{
+  */
+  
+/** @defgroup  HASHEx_Group1 HASH processing functions  
+ *  @brief   processing functions using polling mode 
+ *
+@verbatim   
+ ===============================================================================
+              ##### HASH processing using polling mode functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to calculate in polling mode
+          the hash value using one of the following algorithms:
+      (+) SHA224
+      (+) SHA256
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA224 mode
+  *         then processes pInBuffer. The digest is available in pOutBuffer
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 28 bytes.
+  * @param  Timeout: Specify Timeout value   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Write input buffer in data register */
+  HASHEx_WriteData(pInBuffer, Size);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */          
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Read the message digest */
+  HASHEx_GetDigest(pOutBuffer, 28);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
+            The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed). 
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 32 bytes.
+  * @param  Timeout: Specify Timeout value   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Write input buffer in data register */
+  HASHEx_WriteData(pInBuffer, Size);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */          
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Read the message digest */
+  HASHEx_GetDigest(pOutBuffer, 32);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);  
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA224 mode
+  *         then processes pInBuffer. The digest is available in pOutBuffer
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Write input buffer in data register */
+  HASHEx_WriteData(pInBuffer, Size);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
+            The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Write input buffer in data register */
+  HASHEx_WriteData(pInBuffer, Size);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup HASHEx_Group2 HMAC processing functions using polling mode 
+ *  @brief   HMAC processing functions using polling mode . 
+ *
+@verbatim   
+ ===============================================================================
+            ##### HMAC processing using polling mode functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to calculate in polling mode
+          the HMAC value using one of the following algorithms:
+      (+) SHA224
+      (+) SHA256
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC SHA224 mode
+  *         then processes pInBuffer. The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed). 
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @param  Timeout: Timeout value 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+                                                  
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC SHA224 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+    }
+    else
+    {
+      /* Select the HMAC SHA224 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+    }
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /************************** STEP 1 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+  
+  /* Write input buffer in data register */
+  HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */          
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 2 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Write input buffer in data register */
+  HASHEx_WriteData(pInBuffer, Size);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */          
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 3 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+  
+  /* Write input buffer in data register */
+  HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */          
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /* Read the message digest */
+  HASHEx_GetDigest(pOutBuffer, 28);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC SHA256 mode
+  *         then processes pInBuffer. The digest is available in pOutBuffer
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed). 
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @param  Timeout: Timeout value 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC SHA256 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY);
+    }
+    else
+    {
+      /* Select the HMAC SHA256 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC);
+    }
+    /* Reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_CR_INIT;
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /************************** STEP 1 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+  
+  /* Write input buffer in data register */
+  HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */          
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 2 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Write input buffer in data register */
+  HASHEx_WriteData(pInBuffer, Size);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */          
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /************************** STEP 3 ******************************************/
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+  
+  /* Write input buffer in data register */
+  HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
+  
+  /* Start the digest calculation */
+  __HAL_HASH_START_DIGEST();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((HAL_GetTick() - tickstart ) > Timeout)
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */          
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  /* Read the message digest */
+  HASHEx_GetDigest(pOutBuffer, 32);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASHEx_Group3 HASH processing functions using interrupt mode
+ *  @brief   processing functions using interrupt mode. 
+ *
+@verbatim   
+ ===============================================================================
+              ##### HASH processing using interrupt functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to calculate in interrupt mode
+          the hash value using one of the following algorithms:
+      (+) SHA224
+      (+) SHA256
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA224 mode then processes pInBuffer.
+  *         The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+  uint32_t inputaddr;
+  uint32_t buffercounter;
+  uint32_t inputcounter;
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  if(hhash->State == HAL_HASH_STATE_READY)
+  {
+    /* Change the HASH state */
+    hhash->State = HAL_HASH_STATE_BUSY;
+    
+    hhash->HashInCount = Size;
+    hhash->pHashInBuffPtr = pInBuffer;
+    hhash->pHashOutBuffPtr = pOutBuffer;
+    
+    /* Check if initialization phase has already been performed */
+    if(hhash->Phase == HAL_HASH_PHASE_READY)
+    {
+      /* Select the SHA224 mode */
+      HASH->CR |= HASH_ALGOSELECTION_SHA224;
+      /* Reset the HASH processor core, so that the HASH will be ready to compute 
+         the message digest of a new message */
+      HASH->CR |= HASH_CR_INIT;
+    }
+    /* Reset interrupt counter */
+    hhash->HashITCounter = 0;
+    /* Set the phase */
+    hhash->Phase = HAL_HASH_PHASE_PROCESS;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hhash);
+    
+    /* Enable Interrupts */
+    HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+  {
+    /* Read the message digest */
+    HASHEx_GetDigest(hhash->pHashOutBuffPtr, 28);
+    if(hhash->HashInCount == 0)
+    {
+      /* Disable Interrupts */
+      HASH->IMR = 0;
+      /* Change the HASH state */
+      hhash->State = HAL_HASH_STATE_READY;
+      /* Call digest computation complete callback */
+      HAL_HASH_DgstCpltCallback(hhash);
+      /* Process Unlocked */
+      __HAL_UNLOCK(hhash);
+      
+      /* Return function status */
+      return HAL_OK;
+    }
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+  {
+    if(hhash->HashInCount >= 68)
+    {
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < 64; buffercounter+=4)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      if(hhash->HashITCounter == 0)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        if(hhash->HashInCount >= 68)
+        {
+          /* Decrement buffer counter */
+          hhash->HashInCount -= 68;
+          hhash->pHashInBuffPtr+= 68;
+        }
+        else
+        {
+           hhash->HashInCount = 0;
+          hhash->pHashInBuffPtr+= hhash->HashInCount;
+        }
+        /* Set Interrupt counter */
+        hhash->HashITCounter = 1;
+      }
+      else
+      {
+        /* Decrement buffer counter */
+        hhash->HashInCount -= 64;
+        hhash->pHashInBuffPtr+= 64;
+      }
+    }
+    else
+    {
+      /* Get the buffer address */
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Get the buffer counter */
+      inputcounter = hhash->HashInCount;
+      /* Disable Interrupts */
+      HASH->IMR &= ~(HASH_IT_DINI);
+      /* Configure the number of valid bits in last word of the message */
+      __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+      
+      if((inputcounter > 4) && (inputcounter%4))
+      {
+        inputcounter = (inputcounter+4-inputcounter%4);
+      }
+      else if ((inputcounter < 4) && (inputcounter != 0))
+      {
+        inputcounter = 4;
+      }
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < inputcounter/4; buffercounter++)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      /* Start the digest calculation */
+      __HAL_HASH_START_DIGEST();
+      /* Reset buffer counter */
+      hhash->HashInCount = 0;
+      /* Call Input data transfer complete callback */
+      HAL_HASH_InCpltCallback(hhash);
+    }
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
+  *         The digest is available in pOutBuffer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
+{
+  uint32_t inputaddr;
+  uint32_t buffercounter;
+  uint32_t inputcounter;
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+
+  if(hhash->State == HAL_HASH_STATE_READY)
+  {
+    /* Change the HASH state */
+    hhash->State = HAL_HASH_STATE_BUSY;
+    
+    hhash->HashInCount = Size;
+    hhash->pHashInBuffPtr = pInBuffer;
+    hhash->pHashOutBuffPtr = pOutBuffer;
+    
+    /* Check if initialization phase has already been performed */
+    if(hhash->Phase == HAL_HASH_PHASE_READY)
+    {
+      /* Select the SHA256 mode */
+      HASH->CR |= HASH_ALGOSELECTION_SHA256;
+      /* Reset the HASH processor core, so that the HASH will be ready to compute 
+         the message digest of a new message */
+      HASH->CR |= HASH_CR_INIT;
+    }
+    
+    /* Reset interrupt counter */
+    hhash->HashITCounter = 0;
+    
+    /* Set the phase */
+    hhash->Phase = HAL_HASH_PHASE_PROCESS;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hhash);
+    
+    /* Enable Interrupts */
+    HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
+    
+    /* Return function status */
+    return HAL_OK;
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
+  {
+    /* Read the message digest */
+    HASHEx_GetDigest(hhash->pHashOutBuffPtr, 32);
+    if(hhash->HashInCount == 0)
+    {
+      /* Disable Interrupts */
+      HASH->IMR = 0;
+      /* Change the HASH state */
+      hhash->State = HAL_HASH_STATE_READY;
+      /* Call digest computation complete callback */
+      HAL_HASH_DgstCpltCallback(hhash);
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hhash);
+      
+      /* Return function status */
+      return HAL_OK;
+    }
+  }
+  if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
+  {
+    if(hhash->HashInCount >= 68)
+    {
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < 64; buffercounter+=4)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      if(hhash->HashITCounter == 0)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        
+        if(hhash->HashInCount >= 68)
+        {
+          /* Decrement buffer counter */
+          hhash->HashInCount -= 68;
+          hhash->pHashInBuffPtr+= 68;
+        }
+        else
+        {
+          hhash->HashInCount = 0;
+          hhash->pHashInBuffPtr+= hhash->HashInCount;
+        }
+        /* Set Interrupt counter */
+        hhash->HashITCounter = 1;
+      }
+      else
+      {
+        /* Decrement buffer counter */
+        hhash->HashInCount -= 64;
+        hhash->pHashInBuffPtr+= 64;
+      }
+    }
+    else
+    {
+      /* Get the buffer address */
+      inputaddr = (uint32_t)hhash->pHashInBuffPtr;
+      /* Get the buffer counter */
+      inputcounter = hhash->HashInCount;
+      /* Disable Interrupts */
+      HASH->IMR &= ~(HASH_IT_DINI);
+      /* Configure the number of valid bits in last word of the message */
+      __HAL_HASH_SET_NBVALIDBITS(inputcounter);
+      
+      if((inputcounter > 4) && (inputcounter%4))
+      {
+        inputcounter = (inputcounter+4-inputcounter%4);
+      }
+      else if ((inputcounter < 4) && (inputcounter != 0))
+      {
+        inputcounter = 4;
+      }
+      
+      /* Write the Input block in the Data IN register */
+      for(buffercounter = 0; buffercounter < inputcounter/4; buffercounter++)
+      {
+        HASH->DIN = *(uint32_t*)inputaddr;
+        inputaddr+=4;
+      }
+      /* Start the digest calculation */
+      __HAL_HASH_START_DIGEST();
+      /* Reset buffer counter */
+      hhash->HashInCount = 0;
+      /* Call Input data transfer complete callback */
+      HAL_HASH_InCpltCallback(hhash);
+    }
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief This function handles HASH interrupt request.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @retval None
+  */
+void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash)
+{
+  switch(HASH->CR & HASH_CR_ALGO)
+  {
+    
+    case HASH_ALGOSELECTION_SHA224:
+       HAL_HASHEx_SHA224_Start_IT(hhash, NULL, 0, NULL);
+    break;
+    
+    case HASH_ALGOSELECTION_SHA256:
+      HAL_HASHEx_SHA256_Start_IT(hhash, NULL, 0, NULL);
+    break;
+    
+    default:
+    break;
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HASHEx_Group4 HASH processing functions using DMA mode
+ *  @brief   processing functions using DMA mode. 
+ *
+@verbatim   
+ ===============================================================================
+                ##### HASH processing using DMA functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to calculate in DMA mode
+          the hash value using one of the following algorithms:
+      (+) SHA224
+      (+) SHA256
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA224 mode then enables DMA to
+            control data transfer. Use HAL_HASH_SHA224_Finish() to get the digest.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr  = (uint32_t)pInBuffer;
+  
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
+  }
+   
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+    
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+  
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4 ? (Size+3)/4:Size/4));
+  
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+  
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the computed digest in SHA224
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 28 bytes.
+  * @param  Timeout: Timeout value    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */          
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Read the message digest */
+  HASHEx_GetDigest(pOutBuffer, 28);
+      
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in SHA256 mode then enables DMA to
+            control data transfer. Use HAL_HASH_SHA256_Finish() to get the digest.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr  = (uint32_t)pInBuffer;
+  
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
+  }
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(Size);
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+    
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+  
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4 ? (Size+3)/4:Size/4));
+  
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+  
+   /* Process UnLock */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the computed digest in SHA256.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pOutBuffer: Pointer to the computed digest. Its size must be 32 bytes.
+  * @param  Timeout: Timeout value    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;   
+  
+   /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        /* Change state */
+        hhash->State = HAL_HASH_STATE_TIMEOUT;
+        
+        /* Process Unlocked */          
+        __HAL_UNLOCK(hhash);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Read the message digest */
+  HASHEx_GetDigest(pOutBuffer, 32);
+  
+  /* Change HASH peripheral state */
+  hhash->State = HAL_HASH_STATE_READY;
+  
+   /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+
+/**
+  * @}
+  */
+/** @defgroup HASHEx_Group5 HMAC processing functions using DMA mode 
+ *  @brief   HMAC processing functions using DMA mode . 
+ *
+@verbatim   
+ ===============================================================================
+                ##### HMAC processing using DMA functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to calculate in DMA mode
+          the HMAC value using one of the following algorithms:
+      (+) SHA224
+      (+) SHA256
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC SHA224 mode
+  *         then enables DMA to control data transfer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr;
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Save buffer pointer and size in handle */
+  hhash->pHashInBuffPtr = pInBuffer;
+  hhash->HashBuffSize = Size;
+  hhash->HashInCount = 0;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC SHA224 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
+    }
+    else
+    {
+      /* Select the HMAC SHA224 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
+    }
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+  
+  /* Get the key address */
+  inputaddr = (uint32_t)(hhash->Init.pKey);
+  
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+  
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4 ? (hhash->Init.KeySize+3)/4:hhash->Init.KeySize/4));
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the HASH peripheral in HMAC SHA256 mode
+  *         then enables DMA to control data transfer.
+  * @param  hhash: pointer to a HASH_HandleTypeDef structure that contains
+  *         the configuration information for HASH module
+  * @param  pInBuffer: Pointer to the input buffer (buffer to be hashed).
+  * @param  Size: Length of the input buffer in bytes.
+  *          If the Size is not multiple of 64 bytes, the padding is managed by hardware.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
+{
+  uint32_t inputaddr;
+  
+  /* Process Locked */
+  __HAL_LOCK(hhash);
+  
+  /* Change the HASH state */
+  hhash->State = HAL_HASH_STATE_BUSY;
+  
+  /* Save buffer pointer and size in handle */
+  hhash->pHashInBuffPtr = pInBuffer;
+  hhash->HashBuffSize = Size;
+  hhash->HashInCount = 0;
+  
+  /* Check if initialization phase has already been performed */
+  if(hhash->Phase == HAL_HASH_PHASE_READY)
+  {
+    /* Check if key size is greater than 64 bytes */
+    if(hhash->Init.KeySize > 64)
+    {
+      /* Select the HMAC SHA256 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY);
+    }
+    else
+    {
+      /* Select the HMAC SHA256 mode */
+      HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC);
+    }
+    /* Reset the HASH processor core, so that the HASH will be ready to compute 
+       the message digest of a new message */
+    HASH->CR |= HASH_CR_INIT;
+  }
+  
+  /* Set the phase */
+  hhash->Phase = HAL_HASH_PHASE_PROCESS;
+  
+  /* Configure the number of valid bits in last word of the message */
+  __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
+  
+  /* Get the key address */
+  inputaddr = (uint32_t)(hhash->Init.pKey);
+  
+  /* Set the HASH DMA transfer complete callback */
+  hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
+  /* Set the DMA error callback */
+  hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
+  
+  /* Enable the DMA In DMA Stream */
+  HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4 ? (hhash->Init.KeySize+3)/4:hhash->Init.KeySize/4));
+  /* Enable DMA requests */
+  HASH->CR |= (HASH_CR_DMAE);
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hhash);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+#endif /* STM32F756xx */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_hash_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,199 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_hash_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of HASH HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_HASH_EX_H
+#define __STM32F7xx_HAL_HASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F756xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup HASHEx    
+  * @brief HASHEx HAL Extension module driver 
+  *  @{
+  */ 
+  
+/* Exported types ------------------------------------------------------------*/ 
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HASHEx_Exported_Functions HASHEx Exported Functions
+  * @{
+  */
+
+/** @defgroup HASHEx_Exported_Functions_Group1 HASHEx processing using polling functions
+  * @{
+  */  
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/**
+  * @}
+  */ 
+  
+/** @defgroup HASHEx_Exported_Functions_Group2 HMAC processing using polling functions
+  * @{
+  */ 
+  
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+  * @}
+  */ 
+  
+/** @defgroup HASHEx_Exported_Functions_Group3 HASHEx processing using  functions
+  * @{
+  */ 
+  
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+
+/**
+  * @}
+  */ 
+  
+/** @defgroup HASHEx_Exported_Functions_Group4 HASHEx processing using DMA
+  * @{
+  */
+  
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+  * @}
+  */ 
+  
+/** @defgroup HASHEx_Exported_Functions_Group5 HMAC processing using DMA
+  * @{
+  */
+  
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+  * @}
+  */ 
+  
+/** @defgroup HASHEx_Exported_Functions_Group6 HASHEx processing functions
+  * @{
+  */
+  
+void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+ 
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Types HASHEx Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Variables HASHEx Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Constants HASHEx Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Macros HASHEx Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Functions HASHEx Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+   
+/**
+  * @}
+  */ 
+#endif /* STM32F756xx */
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_HASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_hcd.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1233 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_hcd.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   HCD HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the USB Peripheral Controller:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State functions
+  *         
+  @verbatim
+  ==============================================================================
+                    ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    (#)Declare a HCD_HandleTypeDef handle structure, for example:
+       HCD_HandleTypeDef  hhcd;
+        
+    (#)Fill parameters of Init structure in HCD handle
+  
+    (#)Call HAL_HCD_Init() API to initialize the HCD peripheral (Core, Host core, ...) 
+
+    (#)Initialize the HCD low level resources through the HAL_HCD_MspInit() API:
+        (##) Enable the HCD/USB Low Level interface clock using the following macros
+             (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+             (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode)
+             (+++) __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); (For High Speed Mode)
+           
+        (##) Initialize the related GPIO clocks
+        (##) Configure HCD pin-out
+        (##) Configure HCD NVIC interrupt
+    
+    (#)Associate the Upper USB Host stack to the HAL HCD Driver:
+        (##) hhcd.pData = phost;
+
+    (#)Enable HCD transmission and reception:
+        (##) HAL_HCD_Start();
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HCD HCD 
+  * @brief HCD HAL module driver
+  * @{
+  */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function ----------------------------------------------------------*/
+/** @defgroup HCD_Private_Functions HCD Private Functions
+  * @{
+  */
+static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum); 
+static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd);
+static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Functions HCD Exported Functions
+  * @{
+  */
+
+/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+ ===============================================================================
+          ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initialize the host driver.
+  * @param  hhcd: HCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd)
+{ 
+  /* Check the HCD handle allocation */
+  if(hhcd == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_HCD_ALL_INSTANCE(hhcd->Instance));
+
+  hhcd->State = HAL_HCD_STATE_BUSY;
+  
+  /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+  HAL_HCD_MspInit(hhcd);
+
+  /* Disable the Interrupts */
+ __HAL_HCD_DISABLE(hhcd);
+ 
+ /*Init the Core (common init.) */
+ USB_CoreInit(hhcd->Instance, hhcd->Init);
+ 
+ /* Force Host Mode*/
+ USB_SetCurrentMode(hhcd->Instance , USB_OTG_HOST_MODE);
+ 
+ /* Init Host */
+ USB_HostInit(hhcd->Instance, hhcd->Init);
+ 
+ hhcd->State= HAL_HCD_STATE_READY;
+ 
+ return HAL_OK;
+}
+
+/**
+  * @brief  Initialize a host channel.
+  * @param  hhcd: HCD handle
+  * @param  ch_num: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @param  epnum: Endpoint number.
+  *          This parameter can be a value from 1 to 15
+  * @param  dev_address : Current device address
+  *          This parameter can be a value from 0 to 255
+  * @param  speed: Current device speed.
+  *          This parameter can be one of these values:
+  *            HCD_SPEED_HIGH: High speed mode,
+  *            HCD_SPEED_FULL: Full speed mode,
+  *            HCD_SPEED_LOW: Low speed mode
+  * @param  ep_type: Endpoint Type.
+  *          This parameter can be one of these values:
+  *            EP_TYPE_CTRL: Control type,
+  *            EP_TYPE_ISOC: Isochronous type,
+  *            EP_TYPE_BULK: Bulk type,
+  *            EP_TYPE_INTR: Interrupt type
+  * @param  mps: Max Packet Size.
+  *          This parameter can be a value from 0 to32K
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,  
+                                  uint8_t ch_num,
+                                  uint8_t epnum,
+                                  uint8_t dev_address,
+                                  uint8_t speed,
+                                  uint8_t ep_type,
+                                  uint16_t mps)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  __HAL_LOCK(hhcd); 
+  
+  hhcd->hc[ch_num].dev_addr = dev_address;
+  hhcd->hc[ch_num].max_packet = mps;
+  hhcd->hc[ch_num].ch_num = ch_num;
+  hhcd->hc[ch_num].ep_type = ep_type;
+  hhcd->hc[ch_num].ep_num = epnum & 0x7F;
+  hhcd->hc[ch_num].ep_is_in = ((epnum & 0x80) == 0x80);
+  hhcd->hc[ch_num].speed = speed;
+
+  status =  USB_HC_Init(hhcd->Instance, 
+                        ch_num,
+                        epnum,
+                        dev_address,
+                        speed,
+                        ep_type,
+                        mps);
+  __HAL_UNLOCK(hhcd); 
+  
+  return status;
+}
+
+/**
+  * @brief  Halt a host channel.
+  * @param  hhcd: HCD handle
+  * @param  ch_num: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  __HAL_LOCK(hhcd);   
+  USB_HC_Halt(hhcd->Instance, ch_num);   
+  __HAL_UNLOCK(hhcd);
+  
+  return status;
+}
+
+/**
+  * @brief  DeInitialize the host driver.
+  * @param  hhcd: HCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd)
+{
+  /* Check the HCD handle allocation */
+  if(hhcd == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  hhcd->State = HAL_HCD_STATE_BUSY;
+  
+  /* DeInit the low level hardware */
+  HAL_HCD_MspDeInit(hhcd);
+  
+   __HAL_HCD_DISABLE(hhcd);
+  
+  hhcd->State = HAL_HCD_STATE_RESET; 
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initialize the HCD MSP.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+__weak void  HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hhcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_HCD_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitialize the HCD MSP.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+__weak void  HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hhcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_HCD_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Exported_Functions_Group2 Input and Output operation functions
+  *  @brief   HCD IO operation functions
+  *
+@verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+ [..] This subsection provides a set of functions allowing to manage the USB Host Data 
+    Transfer
+       
+@endverbatim
+  * @{
+  */
+  
+/**                                
+  * @brief  Submit a new URB for processing. 
+  * @param  hhcd: HCD handle
+  * @param  ch_num: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @param  direction: Channel number.
+  *          This parameter can be one of these values:
+  *           0 : Output / 1 : Input
+  * @param  ep_type: Endpoint Type.
+  *          This parameter can be one of these values:
+  *            EP_TYPE_CTRL: Control type/
+  *            EP_TYPE_ISOC: Isochronous type/
+  *            EP_TYPE_BULK: Bulk type/
+  *            EP_TYPE_INTR: Interrupt type/
+  * @param  token: Endpoint Type.
+  *          This parameter can be one of these values:
+  *            0: HC_PID_SETUP / 1: HC_PID_DATA1
+  * @param  pbuff: pointer to URB data
+  * @param  length: Length of URB data
+  * @param  do_ping: activate do ping protocol (for high speed only).
+  *          This parameter can be one of these values:
+  *           0 : do ping inactive / 1 : do ping active 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
+                                            uint8_t ch_num, 
+                                            uint8_t direction ,
+                                            uint8_t ep_type,  
+                                            uint8_t token, 
+                                            uint8_t* pbuff, 
+                                            uint16_t length,
+                                            uint8_t do_ping) 
+{
+  hhcd->hc[ch_num].ep_is_in = direction;
+  hhcd->hc[ch_num].ep_type  = ep_type; 
+  
+  if(token == 0)
+  {
+    hhcd->hc[ch_num].data_pid = HC_PID_SETUP;
+  }
+  else
+  {
+    hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+  }
+  
+  /* Manage Data Toggle */
+  switch(ep_type)
+  {
+  case EP_TYPE_CTRL:
+    if((token == 1) && (direction == 0)) /*send data */
+    {
+      if ( length == 0 )
+      { /* For Status OUT stage, Length==0, Status Out PID = 1 */
+        hhcd->hc[ch_num].toggle_out = 1;
+      }
+      
+      /* Set the Data Toggle bit as per the Flag */
+      if ( hhcd->hc[ch_num].toggle_out == 0)
+      { /* Put the PID 0 */
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA0;    
+      }
+      else
+      { /* Put the PID 1 */
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA1 ;
+      }
+      if(hhcd->hc[ch_num].urb_state  != URB_NOTREADY)
+      {
+        hhcd->hc[ch_num].do_ping = do_ping;
+      }
+    }
+    break;
+  
+  case EP_TYPE_BULK:
+    if(direction == 0)
+    {
+      /* Set the Data Toggle bit as per the Flag */
+      if ( hhcd->hc[ch_num].toggle_out == 0)
+      { /* Put the PID 0 */
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA0;    
+      }
+      else
+      { /* Put the PID 1 */
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA1 ;
+      }
+      if(hhcd->hc[ch_num].urb_state  != URB_NOTREADY)
+      {
+        hhcd->hc[ch_num].do_ping = do_ping;
+      }
+    }
+    else
+    {
+      if( hhcd->hc[ch_num].toggle_in == 0)
+      {
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+      }
+      else
+      {
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+      }
+    }
+    
+    break;
+  case EP_TYPE_INTR:
+    if(direction == 0)
+    {
+      /* Set the Data Toggle bit as per the Flag */
+      if ( hhcd->hc[ch_num].toggle_out == 0)
+      { /* Put the PID 0 */
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA0;    
+      }
+      else
+      { /* Put the PID 1 */
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA1 ;
+      }
+    }
+    else
+    {
+      if( hhcd->hc[ch_num].toggle_in == 0)
+      {
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+      }
+      else
+      {
+        hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
+      }
+    }
+    break;
+    
+  case EP_TYPE_ISOC: 
+    hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
+    break;      
+  }
+  
+  hhcd->hc[ch_num].xfer_buff = pbuff;
+  hhcd->hc[ch_num].xfer_len  = length;
+  hhcd->hc[ch_num].urb_state =   URB_IDLE;  
+  hhcd->hc[ch_num].xfer_count = 0 ;
+  hhcd->hc[ch_num].ch_num = ch_num;
+  hhcd->hc[ch_num].state = HC_IDLE;
+  
+  return USB_HC_StartXfer(hhcd->Instance, &(hhcd->hc[ch_num]), hhcd->Init.dma_enable);
+}
+
+/**
+  * @brief  Handle HCD interrupt request.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+  uint32_t i = 0 , interrupt = 0;
+  
+  /* ensure that we are in device mode */
+  if (USB_GetMode(hhcd->Instance) == USB_OTG_MODE_HOST)
+  {
+    /* avoid spurious interrupt */
+    if(__HAL_HCD_IS_INVALID_INTERRUPT(hhcd)) 
+    {
+      return;
+    }
+    
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
+    {
+     /* incorrect mode, acknowledge the interrupt */
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
+    }
+    
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR))
+    {
+     /* incorrect mode, acknowledge the interrupt */
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR);
+    }
+
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE))
+    {
+     /* incorrect mode, acknowledge the interrupt */
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE);
+    }   
+    
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_MMIS))
+    {
+     /* incorrect mode, acknowledge the interrupt */
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_MMIS);
+    }     
+    
+    /* Handle Host Disconnect Interrupts */
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT))
+    {
+      
+      /* Cleanup HPRT */
+      USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+        USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+       
+      /* Handle Host Port Interrupts */
+      HAL_HCD_Disconnect_Callback(hhcd);
+       USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT);
+    }
+    
+    /* Handle Host Port Interrupts */
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HPRTINT))
+    {
+      HCD_Port_IRQHandler (hhcd);
+    }
+    
+    /* Handle Host SOF Interrupts */
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_SOF))
+    {
+      HAL_HCD_SOF_Callback(hhcd);
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_SOF);
+    }
+          
+    /* Handle Host channel Interrupts */
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HCINT))
+    {
+      interrupt = USB_HC_ReadInterrupt(hhcd->Instance);
+      for (i = 0; i < hhcd->Init.Host_channels ; i++)
+      {
+        if (interrupt & (1 << i))
+        {
+          if ((USBx_HC(i)->HCCHAR) &  USB_OTG_HCCHAR_EPDIR)
+          {
+            HCD_HC_IN_IRQHandler (hhcd, i);
+          }
+          else
+          {
+            HCD_HC_OUT_IRQHandler (hhcd, i);
+          }
+        }
+      }
+      __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_HCINT);
+    } 
+    
+        /* Handle Rx Queue Level Interrupts */
+    if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL))
+    {
+      USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+      
+      HCD_RXQLVL_IRQHandler (hhcd);
+      
+      USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+    }
+  }
+}
+
+/**
+  * @brief  SOF callback.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+__weak void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hhcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_HCD_SOF_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Connection Event callback.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+__weak void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hhcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_HCD_Connect_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Disconnection Event callback.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+__weak void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hhcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_HCD_Disconnect_Callback could be implemented in the user file
+   */
+} 
+
+/**
+  * @brief  Notify URB state change callback.
+  * @param  hhcd: HCD handle
+  * @param  chnum: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @param  urb_state:
+  *          This parameter can be one of these values:
+  *            URB_IDLE/
+  *            URB_DONE/
+  *            URB_NOTREADY/
+  *            URB_NYET/ 
+  *            URB_ERROR/  
+  *            URB_STALL/    
+  * @retval None
+  */
+__weak void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, HCD_URBStateTypeDef urb_state)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hhcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_HCD_HC_NotifyURBChange_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Exported_Functions_Group3 Peripheral Control functions 
+ *  @brief   Management functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the HCD data 
+    transfers.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Start the host driver.
+  * @param  hhcd: HCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd)
+{ 
+  __HAL_LOCK(hhcd); 
+  __HAL_HCD_ENABLE(hhcd);
+  USB_DriveVbus(hhcd->Instance, 1);  
+  __HAL_UNLOCK(hhcd); 
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop the host driver.
+  * @param  hhcd: HCD handle
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd)
+{ 
+  __HAL_LOCK(hhcd); 
+  USB_StopHost(hhcd->Instance);
+  __HAL_UNLOCK(hhcd); 
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reset the host port.
+  * @param  hhcd: HCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd)
+{
+  return (USB_ResetPort(hhcd->Instance));
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Exported_Functions_Group4 Peripheral State functions 
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral State functions #####
+ ===============================================================================  
+    [..]
+    This subsection permits to get in run-time the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the HCD handle state.
+  * @param  hhcd: HCD handle
+  * @retval HAL state
+  */
+HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd)
+{
+  return hhcd->State;
+}
+
+/**
+  * @brief  Return  URB state for a channel.
+  * @param  hhcd: HCD handle
+  * @param  chnum: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval URB state.
+  *          This parameter can be one of these values:
+  *            URB_IDLE/
+  *            URB_DONE/
+  *            URB_NOTREADY/
+  *            URB_NYET/ 
+  *            URB_ERROR/  
+  *            URB_STALL
+  */
+HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+  return hhcd->hc[chnum].urb_state;
+}
+
+
+/**
+  * @brief  Return the last host transfer size.
+  * @param  hhcd: HCD handle
+  * @param  chnum: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval last transfer size in byte
+  */
+uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+  return hhcd->hc[chnum].xfer_count; 
+}
+  
+/**
+  * @brief  Return the Host Channel state.
+  * @param  hhcd: HCD handle
+  * @param  chnum: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval Host channel state
+  *          This parameter can be one of these values:
+  *            HC_IDLE/
+  *            HC_XFRC/
+  *            HC_HALTED/
+  *            HC_NYET/ 
+  *            HC_NAK/  
+  *            HC_STALL/ 
+  *            HC_XACTERR/  
+  *            HC_BBLERR/  
+  *            HC_DATATGLERR   
+  */
+HCD_HCStateTypeDef  HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+  return hhcd->hc[chnum].state;
+}
+
+/**
+  * @brief  Return the current Host frame number.
+  * @param  hhcd: HCD handle
+  * @retval Current Host frame number
+  */
+uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd)
+{
+  return (USB_GetCurrentFrame(hhcd->Instance));
+}
+
+/**
+  * @brief  Return the Host enumeration speed.
+  * @param  hhcd: HCD handle
+  * @retval Enumeration speed
+  */
+uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd)
+{
+  return (USB_GetHostSpeed(hhcd->Instance));
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup HCD_Private_Functions
+  * @{
+  */
+/**
+  * @brief  Handle Host Channel IN interrupt requests.
+  * @param  hhcd: HCD handle
+  * @param  chnum: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval none
+  */
+static void HCD_HC_IN_IRQHandler   (HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+  USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+  uint32_t tmpreg = 0;
+  
+  if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_AHBERR)
+  {
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+  }  
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_ACK)
+  {
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
+  }
+  
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_STALL)  
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    hhcd->hc[chnum].state = HC_STALL;
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);    
+    USB_HC_Halt(hhcd->Instance, chnum);    
+  }
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_DTERR)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    USB_HC_Halt(hhcd->Instance, chnum);  
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);    
+    hhcd->hc[chnum].state = HC_DATATGLERR;
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
+  }    
+  
+  if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_FRMOR)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum); 
+    USB_HC_Halt(hhcd->Instance, chnum);  
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
+  }
+  
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_XFRC)
+  {
+    
+    if (hhcd->Init.dma_enable)
+    {
+      hhcd->hc[chnum].xfer_count = hhcd->hc[chnum].xfer_len - \
+                               (USBx_HC(chnum)->HCTSIZ & USB_OTG_HCTSIZ_XFRSIZ);
+    }
+    
+    hhcd->hc[chnum].state = HC_XFRC;
+    hhcd->hc[chnum].ErrCnt = 0;
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
+    
+    
+    if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL)||
+        (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
+    {
+      __HAL_HCD_UNMASK_HALT_HC_INT(chnum); 
+      USB_HC_Halt(hhcd->Instance, chnum); 
+      __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+      
+    }
+    else if(hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
+    {
+      USBx_HC(chnum)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM;
+      hhcd->hc[chnum].urb_state = URB_DONE; 
+      HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+    }
+    hhcd->hc[chnum].toggle_in ^= 1;
+    
+  }
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_CHH)
+  {
+    __HAL_HCD_MASK_HALT_HC_INT(chnum); 
+    
+    if(hhcd->hc[chnum].state == HC_XFRC)
+    {
+      hhcd->hc[chnum].urb_state  = URB_DONE;      
+    }
+    
+    else if (hhcd->hc[chnum].state == HC_STALL) 
+    {
+      hhcd->hc[chnum].urb_state  = URB_STALL;
+    }   
+    
+    else if((hhcd->hc[chnum].state == HC_XACTERR) ||
+            (hhcd->hc[chnum].state == HC_DATATGLERR))
+    {
+      if(hhcd->hc[chnum].ErrCnt++ > 3)
+      {      
+        hhcd->hc[chnum].ErrCnt = 0;
+        hhcd->hc[chnum].urb_state = URB_ERROR;
+      }
+      else
+      {
+        hhcd->hc[chnum].urb_state = URB_NOTREADY;
+      }
+      
+      /* re-activate the channel  */
+      tmpreg = USBx_HC(chnum)->HCCHAR;
+      tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+      tmpreg |= USB_OTG_HCCHAR_CHENA;
+      USBx_HC(chnum)->HCCHAR = tmpreg;    
+    }
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
+    HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
+  }  
+  
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_TXERR)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum); 
+     hhcd->hc[chnum].ErrCnt++;
+     hhcd->hc[chnum].state = HC_XACTERR;
+     USB_HC_Halt(hhcd->Instance, chnum);     
+     __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
+  }
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_NAK)
+  {  
+    if(hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
+    {
+      __HAL_HCD_UNMASK_HALT_HC_INT(chnum); 
+      USB_HC_Halt(hhcd->Instance, chnum);  
+    }
+    else if  ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL)||
+         (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
+    {
+      /* re-activate the channel  */
+      tmpreg = USBx_HC(chnum)->HCCHAR;
+      tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+      tmpreg |= USB_OTG_HCCHAR_CHENA;
+      USBx_HC(chnum)->HCCHAR = tmpreg;
+    }
+    hhcd->hc[chnum].state = HC_NAK;
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+  }
+}
+
+/**
+  * @brief  Handle Host Channel OUT interrupt requests.
+  * @param  hhcd: HCD handle
+  * @param  chnum: Channel number.
+  *         This parameter can be a value from 1 to 15
+  * @retval none
+  */
+static void HCD_HC_OUT_IRQHandler  (HCD_HandleTypeDef *hhcd, uint8_t chnum)
+{
+  USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
+  uint32_t tmpreg = 0;
+  
+  if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_AHBERR)
+  {
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+  }  
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_ACK)
+  {
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
+    
+    if( hhcd->hc[chnum].do_ping == 1)
+    {
+      hhcd->hc[chnum].state = HC_NYET;     
+      __HAL_HCD_UNMASK_HALT_HC_INT(chnum); 
+      USB_HC_Halt(hhcd->Instance, chnum); 
+      hhcd->hc[chnum].urb_state  = URB_NOTREADY;
+    }
+  }
+  
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_NYET)
+  {
+    hhcd->hc[chnum].state = HC_NYET;
+    hhcd->hc[chnum].ErrCnt= 0;    
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum); 
+    USB_HC_Halt(hhcd->Instance, chnum);      
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NYET);
+    
+  }  
+  
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_FRMOR)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum); 
+    USB_HC_Halt(hhcd->Instance, chnum);  
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
+  }
+  
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_XFRC)
+  {
+      hhcd->hc[chnum].ErrCnt = 0;  
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    USB_HC_Halt(hhcd->Instance, chnum);   
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
+    hhcd->hc[chnum].state = HC_XFRC;
+
+  }  
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_STALL)  
+  {
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);  
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
+    USB_HC_Halt(hhcd->Instance, chnum);   
+    hhcd->hc[chnum].state = HC_STALL;    
+  }
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_NAK)
+  {  
+    hhcd->hc[chnum].ErrCnt = 0;  
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum); 
+    USB_HC_Halt(hhcd->Instance, chnum);   
+    hhcd->hc[chnum].state = HC_NAK;
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+  }
+
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_TXERR)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum); 
+    USB_HC_Halt(hhcd->Instance, chnum);      
+    hhcd->hc[chnum].state = HC_XACTERR;  
+     __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
+  }
+  
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_DTERR)
+  {
+    __HAL_HCD_UNMASK_HALT_HC_INT(chnum); 
+    USB_HC_Halt(hhcd->Instance, chnum);      
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);    
+    hhcd->hc[chnum].state = HC_DATATGLERR;
+  }
+  
+  
+  else if ((USBx_HC(chnum)->HCINT) &  USB_OTG_HCINT_CHH)
+  {
+    __HAL_HCD_MASK_HALT_HC_INT(chnum); 
+    
+    if(hhcd->hc[chnum].state == HC_XFRC)
+    {
+      hhcd->hc[chnum].urb_state  = URB_DONE;
+      if (hhcd->hc[chnum].ep_type == EP_TYPE_BULK)
+      {
+        hhcd->hc[chnum].toggle_out ^= 1; 
+      }      
+    }
+    else if (hhcd->hc[chnum].state == HC_NAK) 
+    {
+      hhcd->hc[chnum].urb_state  = URB_NOTREADY;
+    }  
+    
+    else if (hhcd->hc[chnum].state == HC_NYET) 
+    {
+      hhcd->hc[chnum].urb_state  = URB_NOTREADY;
+      hhcd->hc[chnum].do_ping = 0;
+    }   
+    
+    else if (hhcd->hc[chnum].state == HC_STALL) 
+    {
+      hhcd->hc[chnum].urb_state  = URB_STALL;
+    } 
+    
+    else if((hhcd->hc[chnum].state == HC_XACTERR) ||
+            (hhcd->hc[chnum].state == HC_DATATGLERR))
+    {
+      if(hhcd->hc[chnum].ErrCnt++ > 3)
+      {      
+        hhcd->hc[chnum].ErrCnt = 0;
+        hhcd->hc[chnum].urb_state = URB_ERROR;
+      }
+      else
+      {
+        hhcd->hc[chnum].urb_state = URB_NOTREADY;
+      }
+      
+      /* re-activate the channel  */
+      tmpreg = USBx_HC(chnum)->HCCHAR;
+      tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+      tmpreg |= USB_OTG_HCCHAR_CHENA;
+      USBx_HC(chnum)->HCCHAR = tmpreg;   
+    }
+    
+    __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
+    HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);  
+  }
+} 
+
+/**
+  * @brief  Handle Rx Queue Level interrupt requests.
+  * @param  hhcd: HCD handle
+  * @retval none
+  */
+static void HCD_RXQLVL_IRQHandler  (HCD_HandleTypeDef *hhcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;  
+  uint8_t                       channelnum =0;  
+  uint32_t                      pktsts;
+  uint32_t                      pktcnt; 
+  uint32_t                      temp = 0;
+  uint32_t tmpreg = 0;
+  
+  temp = hhcd->Instance->GRXSTSP ;
+  channelnum = temp &  USB_OTG_GRXSTSP_EPNUM;  
+  pktsts = (temp &  USB_OTG_GRXSTSP_PKTSTS) >> 17;
+  pktcnt = (temp &  USB_OTG_GRXSTSP_BCNT) >> 4;
+    
+  switch (pktsts)
+  {
+  case GRXSTS_PKTSTS_IN:
+    /* Read the data into the host buffer. */
+    if ((pktcnt > 0) && (hhcd->hc[channelnum].xfer_buff != (void  *)0))
+    {  
+      
+      USB_ReadPacket(hhcd->Instance, hhcd->hc[channelnum].xfer_buff, pktcnt);
+     
+      /*manage multiple Xfer */
+      hhcd->hc[channelnum].xfer_buff += pktcnt;           
+      hhcd->hc[channelnum].xfer_count  += pktcnt;
+        
+      if((USBx_HC(channelnum)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) > 0)
+      {
+        /* re-activate the channel when more packets are expected */
+        tmpreg = USBx_HC(channelnum)->HCCHAR;
+        tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+        tmpreg |= USB_OTG_HCCHAR_CHENA;
+        USBx_HC(channelnum)->HCCHAR = tmpreg;
+        hhcd->hc[channelnum].toggle_in ^= 1;
+      }
+    }
+    break;
+
+  case GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
+    break;
+  case GRXSTS_PKTSTS_IN_XFER_COMP:
+  case GRXSTS_PKTSTS_CH_HALTED:
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  Handle Host Port interrupt requests.
+  * @param  hhcd: HCD handle
+  * @retval None
+  */
+static void HCD_Port_IRQHandler  (HCD_HandleTypeDef *hhcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;  
+  __IO uint32_t hprt0, hprt0_dup;
+  
+  /* Handle Host Port Interrupts */
+  hprt0 = USBx_HPRT0;
+  hprt0_dup = USBx_HPRT0;
+  
+  hprt0_dup &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+                 USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+  
+  /* Check whether Port Connect detected */
+  if((hprt0 & USB_OTG_HPRT_PCDET) == USB_OTG_HPRT_PCDET)
+  {  
+    if((hprt0 & USB_OTG_HPRT_PCSTS) == USB_OTG_HPRT_PCSTS)
+    {
+      USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT);
+      HAL_HCD_Connect_Callback(hhcd);
+    }
+    hprt0_dup  |= USB_OTG_HPRT_PCDET;
+    
+  }
+  
+  /* Check whether Port Enable Changed */
+  if((hprt0 & USB_OTG_HPRT_PENCHNG) == USB_OTG_HPRT_PENCHNG)
+  {
+    hprt0_dup |= USB_OTG_HPRT_PENCHNG;
+    
+    if((hprt0 & USB_OTG_HPRT_PENA) == USB_OTG_HPRT_PENA)
+    {    
+      if(hhcd->Init.phy_itface  == USB_OTG_EMBEDDED_PHY)
+      {
+        if ((hprt0 & USB_OTG_HPRT_PSPD) == (HPRT0_PRTSPD_LOW_SPEED << 17))
+        {
+          USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_6_MHZ );
+        }
+        else
+        {
+          USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
+        }
+      }
+      else
+      {
+        if(hhcd->Init.speed == HCD_SPEED_FULL)
+        {
+          USBx_HOST->HFIR = (uint32_t)60000;
+        }
+      }
+      HAL_HCD_Connect_Callback(hhcd);
+      
+      if(hhcd->Init.speed == HCD_SPEED_HIGH)
+      {
+        USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT); 
+      }
+    }
+    else
+    {
+      /* Cleanup HPRT */
+      USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+        USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+      
+      USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT); 
+    }    
+  }
+  
+  /* Check For an overcurrent */
+  if((hprt0 & USB_OTG_HPRT_POCCHNG) == USB_OTG_HPRT_POCCHNG)
+  {
+    hprt0_dup |= USB_OTG_HPRT_POCCHNG;
+  }
+
+  /* Clear Port Interrupts */
+  USBx_HPRT0 = hprt0_dup;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+#endif /* HAL_HCD_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_hcd.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,281 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_hcd.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of HCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_HCD_H
+#define __STM32F7xx_HAL_HCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_usb.h"
+   
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup HCD HCD
+  * @brief HCD HAL module driver
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Types HCD Exported Types
+  * @{
+  */ 
+
+/** @defgroup HCD_Exported_Types_Group1 HCD State Structure definition 
+  * @{
+  */
+typedef enum 
+{
+  HAL_HCD_STATE_RESET    = 0x00,
+  HAL_HCD_STATE_READY    = 0x01,
+  HAL_HCD_STATE_ERROR    = 0x02,
+  HAL_HCD_STATE_BUSY     = 0x03,
+  HAL_HCD_STATE_TIMEOUT  = 0x04
+} HCD_StateTypeDef;
+
+typedef USB_OTG_GlobalTypeDef   HCD_TypeDef;
+typedef USB_OTG_CfgTypeDef      HCD_InitTypeDef;
+typedef USB_OTG_HCTypeDef       HCD_HCTypeDef ;   
+typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef ;
+typedef USB_OTG_HCStateTypeDef  HCD_HCStateTypeDef ;
+/**
+  * @}
+  */
+
+/** @defgroup HCD_Exported_Types_Group2 HCD Handle Structure definition   
+  * @{
+  */ 
+typedef struct
+{
+  HCD_TypeDef               *Instance;  /*!< Register base address    */ 
+  HCD_InitTypeDef           Init;       /*!< HCD required parameters  */
+  HCD_HCTypeDef             hc[15];     /*!< Host channels parameters */
+  HAL_LockTypeDef           Lock;       /*!< HCD peripheral status    */
+  __IO HCD_StateTypeDef     State;      /*!< HCD communication state  */
+  void                      *pData;     /*!< Pointer Stack Handler    */
+} HCD_HandleTypeDef;
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Constants HCD Exported Constants
+  * @{
+  */
+
+/** @defgroup HCD_Speed HCD Speed
+  * @{
+  */
+#define HCD_SPEED_HIGH               0
+#define HCD_SPEED_LOW                2  
+#define HCD_SPEED_FULL               3
+/**
+  * @}
+  */
+  
+/** @defgroup HCD_PHY_Module HCD PHY Module
+  * @{
+  */
+#define HCD_PHY_ULPI                 1
+#define HCD_PHY_EMBEDDED             2
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Macros HCD Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_HCD_ENABLE(__HANDLE__)                   USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_HCD_DISABLE(__HANDLE__)                  USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)    
+
+#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__)  (USBx_HC(chnum)->HCINT = (__INTERRUPT__)) 
+#define __HAL_HCD_MASK_HALT_HC_INT(chnum)             (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM) 
+#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum)           (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM) 
+#define __HAL_HCD_MASK_ACK_HC_INT(chnum)              (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM) 
+#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum)            (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM) 
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HCD_Exported_Functions HCD Exported Functions
+  * @{
+  */
+
+/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef      HAL_HCD_Init(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef      HAL_HCD_DeInit (HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef      HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,  
+                                  uint8_t ch_num,
+                                  uint8_t epnum,
+                                  uint8_t dev_address,
+                                  uint8_t speed,
+                                  uint8_t ep_type,
+                                  uint16_t mps);
+
+HAL_StatusTypeDef   HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num);
+void                HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
+void                HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
+/**
+  * @}
+  */
+
+/* I/O operation functions  ***************************************************/
+/** @addtogroup HCD_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+HAL_StatusTypeDef       HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
+                                                 uint8_t pipe, 
+                                                 uint8_t direction ,
+                                                 uint8_t ep_type,  
+                                                 uint8_t token, 
+                                                 uint8_t* pbuff, 
+                                                 uint16_t length,
+                                                 uint8_t do_ping);
+
+ /* Non-Blocking mode: Interrupt */
+void                    HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
+void             HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
+void             HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
+void             HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
+void             HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, 
+                                                            uint8_t chnum, 
+                                                            HCD_URBStateTypeDef urb_state);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+/** @addtogroup HCD_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef       HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef       HAL_HCD_Start(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef       HAL_HCD_Stop(HCD_HandleTypeDef *hhcd);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+/** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+HCD_StateTypeDef        HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
+HCD_URBStateTypeDef     HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t                HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+HCD_HCStateTypeDef      HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t                HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
+uint32_t                HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HCD_Private_Macros HCD Private Macros
+ * @{
+ */
+/** @defgroup HCD_Instance_definition HCD Instance definition
+  * @{
+  */
+#define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
+                                       ((INSTANCE) == USB_OTG_HS))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup HCD_Private_Functions_Prototypes HCD Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HCD_Private_Functions HCD Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_HCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_i2c.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,4220 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_i2c.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   I2C HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Inter Integrated Circuit (I2C) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State and Errors functions
+  *         
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    The I2C HAL driver can be used as follows:
+    
+    (#) Declare a I2C_HandleTypeDef handle structure, for example:
+        I2C_HandleTypeDef  hi2c; 
+
+    (#)Initialize the I2C low level resources by implement the HAL_I2C_MspInit ()API:
+        (##) Enable the I2Cx interface clock
+        (##) I2C pins configuration
+            (+++) Enable the clock for the I2C GPIOs
+            (+++) Configure I2C pins as alternate function open-drain
+        (##) NVIC configuration if you need to use interrupt process
+            (+++) Configure the I2Cx interrupt priority
+            (+++) Enable the NVIC I2C IRQ Channel
+        (##) DMA Configuration if you need to use DMA process
+            (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
+            (+++) Enable the DMAx interface clock using
+            (+++) Configure the DMA handle parameters
+            (+++) Configure the DMA Tx or Rx Stream
+            (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream
+
+    (#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode,
+        Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure.
+
+    (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware 
+        (GPIO, CLOCK, NVIC...etc) by calling the customed HAL_I2C_MspInit(&hi2c) API.
+
+    (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady()
+
+    (#) For I2C IO and IO MEM operations, three operation modes are available within this driver :
+
+    *** Polling mode IO operation ***
+    =================================
+    [..]
+      (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit()
+      (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive()
+      (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit()
+      (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive()
+
+    *** Polling mode IO MEM operation ***
+    =====================================
+    [..]
+      (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write()
+      (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read()
+
+
+    *** Interrupt mode IO operation ***
+    ===================================
+    [..]
+      (+) Transmit in master mode an amount of data in non blocking mode using HAL_I2C_Master_Transmit_IT()
+      (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback
+      (+) Receive in master mode an amount of data in non blocking mode using HAL_I2C_Master_Receive_IT()
+      (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback
+      (+) Transmit in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Transmit_IT()
+      (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback
+      (+) Receive in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Receive_IT()
+      (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback
+      (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+    *** Interrupt mode IO MEM operation ***
+    =======================================
+    [..]
+      (+) Write an amount of data in no-blocking mode with Interrupt to a specific memory address using
+          HAL_I2C_Mem_Write_IT()
+      (+) At Memory end of write transfer, HAL_I2C_MemTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback
+      (+) Read an amount of data in no-blocking mode with Interrupt from a specific memory address using
+          HAL_I2C_Mem_Read_IT()
+      (+) At Memory end of read transfer, HAL_I2C_MemRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback
+      (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+    *** DMA mode IO operation ***
+    ==============================
+    [..]
+      (+) Transmit in master mode an amount of data in non blocking mode (DMA) using
+          HAL_I2C_Master_Transmit_DMA()
+      (+) At transmission end of transfer, HAL_I2C_MasterTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback
+      (+) Receive in master mode an amount of data in non blocking mode (DMA) using
+          HAL_I2C_Master_Receive_DMA()
+      (+) At reception end of transfer, HAL_I2C_MasterRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback
+      (+) Transmit in slave mode an amount of data in non blocking mode (DMA) using
+          HAL_I2C_Slave_Transmit_DMA()
+      (+) At transmission end of transfer, HAL_I2C_SlaveTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback
+      (+) Receive in slave mode an amount of data in non blocking mode (DMA) using
+          HAL_I2C_Slave_Receive_DMA()
+      (+) At reception end of transfer, HAL_I2C_SlaveRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback
+      (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+    *** DMA mode IO MEM operation ***
+    =================================
+    [..]
+      (+) Write an amount of data in no-blocking mode with DMA to a specific memory address using
+          HAL_I2C_Mem_Write_DMA()
+      (+) At Memory end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback
+      (+) Read an amount of data in no-blocking mode with DMA from a specific memory address using
+          HAL_I2C_Mem_Read_DMA()
+      (+) At Memory end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can
+           add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback
+      (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
+           add his own code by customization of function pointer HAL_I2C_ErrorCallback
+
+
+     *** I2C HAL driver macros list ***
+     ==================================
+     [..]
+       Below the list of most used macros in I2C HAL driver.
+
+      (+) __HAL_I2C_ENABLE: Enable the I2C peripheral
+      (+) __HAL_I2C_DISABLE: Disable the I2C peripheral
+      (+) __HAL_I2C_GET_FLAG : Check whether the specified I2C flag is set or not
+      (+) __HAL_I2C_CLEAR_FLAG : Clear the specified I2C pending flag
+      (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt
+      (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt
+
+     [..]
+       (@) You can refer to the I2C HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup I2C I2C HAL module driver
+  * @brief I2C HAL module driver
+  * @{
+  */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup I2C_Private_Constants I2C Private Constants
+  * @{
+  */
+#define TIMING_CLEAR_MASK   ((uint32_t)0xF0FFFFFF)  /*<! I2C TIMING clear register Mask */
+#define I2C_TIMEOUT_ADDR    ((uint32_t)10000)       /* 10 s  */
+#define I2C_TIMEOUT_BUSY    ((uint32_t)25)          /* 25 ms */
+#define I2C_TIMEOUT_DIR     ((uint32_t)25)          /* 25 ms */
+#define I2C_TIMEOUT_RXNE    ((uint32_t)25)          /* 25 ms */
+#define I2C_TIMEOUT_STOPF   ((uint32_t)25)          /* 25 ms */
+#define I2C_TIMEOUT_TC      ((uint32_t)25)          /* 25 ms */
+#define I2C_TIMEOUT_TCR     ((uint32_t)25)          /* 25 ms */
+#define I2C_TIMEOUT_TXIS    ((uint32_t)25)          /* 25 ms */
+#define I2C_TIMEOUT_FLAG    ((uint32_t)25)          /* 25 ms */
+/**
+  * @}
+  */ 
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup I2C_Private_Functions I2C Private Functions
+  * @{
+  */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma);
+static void I2C_DMAError(DMA_HandleTypeDef *hdma);
+
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout);
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout);
+
+static HAL_StatusTypeDef I2C_MasterTransmit_ISR(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_MasterReceive_ISR(I2C_HandleTypeDef *hi2c);
+
+static HAL_StatusTypeDef I2C_SlaveTransmit_ISR(I2C_HandleTypeDef *hi2c);
+static HAL_StatusTypeDef I2C_SlaveReceive_ISR(I2C_HandleTypeDef *hi2c);
+
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c,  uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
+/**
+  * @}
+  */ 
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Functions I2C Exported Functions
+  * @{
+  */
+
+/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and 
+          de-initialize the I2Cx peripheral:
+
+      (+) User must Implement HAL_I2C_MspInit() function in which he configures 
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+      (+) Call the function HAL_I2C_Init() to configure the selected device with 
+          the selected configuration:
+        (++) Clock Timing
+        (++) Own Address 1
+        (++) Addressing mode (Master, Slave)
+        (++) Dual Addressing mode
+        (++) Own Address 2
+        (++) Own Address 2 Mask
+        (++) General call mode
+        (++) Nostretch mode
+
+      (+) Call the function HAL_I2C_DeInit() to restore the default configuration 
+          of the selected I2Cx peripheral.       
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the I2C according to the specified parameters 
+  *         in the I2C_InitTypeDef and create the associated handle.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c)
+{ 
+  /* Check the I2C handle allocation */
+  if(hi2c == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1));
+  assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode));
+  assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode));
+  assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2));
+  assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks));
+  assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode));
+  assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode));
+
+  if(hi2c->State == HAL_I2C_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hi2c->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+    HAL_I2C_MspInit(hi2c);
+  }
+
+  hi2c->State = HAL_I2C_STATE_BUSY;
+  
+  /* Disable the selected I2C peripheral */
+  __HAL_I2C_DISABLE(hi2c);
+  
+  /*---------------------------- I2Cx TIMINGR Configuration ------------------*/
+  /* Configure I2Cx: Frequency range */
+  hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK;
+  
+  /*---------------------------- I2Cx OAR1 Configuration ---------------------*/
+  /* Configure I2Cx: Own Address1 and ack own address1 mode */
+  hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN;
+  if(hi2c->Init.OwnAddress1 != 0)
+  {
+    if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
+    {
+      hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1);
+    }
+    else /* I2C_ADDRESSINGMODE_10BIT */
+    {
+      hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1);
+    }
+  }
+  
+  /*---------------------------- I2Cx CR2 Configuration ----------------------*/
+  /* Configure I2Cx: Addressing Master mode */
+  if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+  {
+    hi2c->Instance->CR2 = (I2C_CR2_ADD10);
+  }
+  /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
+  hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK);
+  
+  /*---------------------------- I2Cx OAR2 Configuration ---------------------*/
+  /* Configure I2Cx: Dual mode and Own Address2 */
+  hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8));
+
+  /*---------------------------- I2Cx CR1 Configuration ----------------------*/
+  /* Configure I2Cx: Generalcall and NoStretch mode */
+  hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode);
+  
+  /* Enable the selected I2C peripheral */
+  __HAL_I2C_ENABLE(hi2c);
+  
+  hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+  hi2c->State = HAL_I2C_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the I2C peripheral. 
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c)
+{
+  /* Check the I2C handle allocation */
+  if(hi2c == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  
+  hi2c->State = HAL_I2C_STATE_BUSY;
+  
+  /* Disable the I2C Peripheral Clock */
+  __HAL_I2C_DISABLE(hi2c);
+  
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_I2C_MspDeInit(hi2c);
+  
+  hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
+  hi2c->State = HAL_I2C_STATE_RESET;
+  
+  /* Release Lock */
+  __HAL_UNLOCK(hi2c);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief I2C MSP Init.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+ __weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief I2C MSP DeInit
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+ __weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ *  @brief   Data transfers functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to manage the I2C data 
+    transfers.
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode : The communication is performed in the polling mode. 
+            The status of all data processing is returned by the same function 
+            after finishing transfer.  
+       (++) No-Blocking mode : The communication is performed using Interrupts 
+            or DMA. These functions return the status of the transfer startup.
+            The end of the data processing will be indicated through the 
+            dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when 
+            using DMA mode.
+
+    (#) Blocking mode functions are :
+        (++) HAL_I2C_Master_Transmit()
+        (++) HAL_I2C_Master_Receive()
+        (++) HAL_I2C_Slave_Transmit()
+        (++) HAL_I2C_Slave_Receive()
+        (++) HAL_I2C_Mem_Write()
+        (++) HAL_I2C_Mem_Read()
+        (++) HAL_I2C_IsDeviceReady()
+        
+    (#) No-Blocking mode functions with Interrupt are :
+        (++) HAL_I2C_Master_Transmit_IT()
+        (++) HAL_I2C_Master_Receive_IT()
+        (++) HAL_I2C_Slave_Transmit_IT()
+        (++) HAL_I2C_Slave_Receive_IT()
+        (++) HAL_I2C_Mem_Write_IT()
+        (++) HAL_I2C_Mem_Read_IT()
+
+    (#) No-Blocking mode functions with DMA are :
+        (++) HAL_I2C_Master_Transmit_DMA()
+        (++) HAL_I2C_Master_Receive_DMA()
+        (++) HAL_I2C_Slave_Transmit_DMA()
+        (++) HAL_I2C_Slave_Receive_DMA()
+        (++) HAL_I2C_Mem_Write_DMA()
+        (++) HAL_I2C_Mem_Read_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_I2C_MemTxCpltCallback()
+        (++) HAL_I2C_MemRxCpltCallback()
+        (++) HAL_I2C_MasterTxCpltCallback()
+        (++) HAL_I2C_MasterRxCpltCallback()
+        (++) HAL_I2C_SlaveTxCpltCallback()
+        (++) HAL_I2C_SlaveRxCpltCallback()
+        (++) HAL_I2C_ErrorCallback()
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Transmits in master mode an amount of data in blocking mode.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t sizetmp = 0;
+  
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {    
+    if((pData == NULL ) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_MASTER_BUSY_TX;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+    
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    /* Size > 255, need to set RELOAD bit */
+    if(Size > 255)
+    {
+      I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+      sizetmp = 255;
+    }
+    else
+    {
+      I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+      sizetmp = Size;
+    }
+    
+    do
+    {
+      /* Wait until TXIS flag is set */
+      if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+      {
+        if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+        {
+          return HAL_ERROR;
+        }
+        else
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+      /* Write data to TXDR */
+      hi2c->Instance->TXDR = (*pData++);
+      sizetmp--;
+      Size--;
+      
+      if((sizetmp == 0)&&(Size!=0))
+      {
+        /* Wait until TCR flag is set */
+        if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout) != HAL_OK)      
+        {
+          return HAL_TIMEOUT;
+        }
+        
+        if(Size > 255)
+        {
+          I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+          sizetmp = 255;
+        }
+        else
+        {
+          I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+          sizetmp = Size;
+        }
+      }
+      
+    }while(Size > 0);
+    
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is set */
+    if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+  	
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_READY; 	  
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief  Receives in master mode an amount of data in blocking mode. 
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t sizetmp = 0;
+  
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {    
+    if((pData == NULL ) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_MASTER_BUSY_RX;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+    
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    /* Size > 255, need to set RELOAD bit */
+    if(Size > 255)
+    {
+      I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+      sizetmp = 255;
+    }
+    else
+    {
+      I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+      sizetmp = Size;
+    }
+    
+    do
+    {
+      /* Wait until RXNE flag is set */
+      if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, I2C_FLAG_RXNE) != HAL_OK)      
+      {
+        if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+        {
+          return HAL_ERROR;
+        }
+        else
+        {
+          return HAL_TIMEOUT;
+        }
+	  }
+      
+      /* Write data to RXDR */
+      (*pData++) =hi2c->Instance->RXDR;
+      sizetmp--;
+      Size--;
+      
+      if((sizetmp == 0)&&(Size!=0))
+      {
+        /* Wait until TCR flag is set */
+        if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout) != HAL_OK)      
+        {
+          return HAL_TIMEOUT;
+        }
+        
+        if(Size > 255)
+        {
+          I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+          sizetmp = 255;
+        }
+        else
+        {
+          I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+          sizetmp = Size;
+        }
+      }
+      
+    }while(Size > 0);
+    
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is set */
+    if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+  	
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_READY; 	  
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief  Transmits in slave mode an amount of data in blocking mode. 
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {    
+    if((pData == NULL ) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_SLAVE_BUSY_RX;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+    
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+    
+    /* Wait until ADDR flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)      
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+    
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_ADDR);
+    
+    /* If 10bit addressing mode is selected */
+    if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+    {
+      /* Wait until ADDR flag is set */
+      if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)      
+      {
+        /* Disable Address Acknowledge */
+        hi2c->Instance->CR2 |= I2C_CR2_NACK;
+        return HAL_TIMEOUT;
+      }
+      
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_ADDR);
+    }
+    
+    /* Wait until DIR flag is set Transmitter mode */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout) != HAL_OK)      
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+    
+    do
+    {
+      /* Wait until TXIS flag is set */
+      if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+      {
+        /* Disable Address Acknowledge */
+        hi2c->Instance->CR2 |= I2C_CR2_NACK;
+        
+        if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+        {
+          return HAL_ERROR;
+        }
+        else
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+      
+      /* Read data from TXDR */
+      hi2c->Instance->TXDR = (*pData++);
+      Size--;
+    }while(Size > 0);
+    
+    /* Wait until STOP flag is set */
+    if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Normal use case for Transmitter mode */
+        /* A NACK is generated to confirm the end of transfer */
+        hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Clear STOP flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_STOPF);
+    
+    /* Wait until BUSY flag is reset */ 
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout) != HAL_OK)      
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+    
+    /* Disable Address Acknowledge */
+    hi2c->Instance->CR2 |= I2C_CR2_NACK;
+    
+    hi2c->State = HAL_I2C_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief  Receive in slave mode an amount of data in blocking mode 
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {  
+    if((pData == NULL ) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_SLAVE_BUSY_RX;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+    
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+    
+    /* Wait until ADDR flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)      
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+    
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_ADDR);
+    
+    /* Wait until DIR flag is reset Receiver mode */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout) != HAL_OK)      
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+    
+    while(Size > 0)
+    {
+      /* Wait until RXNE flag is set */
+      if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout) != HAL_OK)      
+      {
+        /* Disable Address Acknowledge */
+        hi2c->Instance->CR2 |= I2C_CR2_NACK;
+        
+        /* Store Last receive data if any */
+        if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET)
+        {
+          /* Read data from RXDR */
+          (*pData++) = hi2c->Instance->RXDR;
+        }
+        
+        if(hi2c->ErrorCode == HAL_I2C_ERROR_TIMEOUT)
+        {
+          return HAL_TIMEOUT;
+        }
+        else
+        {
+          return HAL_ERROR;
+        }
+      }
+      
+      /* Read data from RXDR */
+      (*pData++) = hi2c->Instance->RXDR;
+      Size--;
+    }
+    
+    /* Wait until STOP flag is set */
+    if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Clear STOP flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_STOPF);
+    
+    /* Wait until BUSY flag is reset */ 
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout) != HAL_OK)      
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+    
+    
+    /* Disable Address Acknowledge */
+    hi2c->Instance->CR2 |= I2C_CR2_NACK;
+    
+    hi2c->State = HAL_I2C_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  } 
+}
+
+/**
+  * @brief  Transmit in master mode an amount of data in no-blocking mode with Interrupt
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{   
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_MASTER_BUSY_TX;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+    
+    hi2c->pBuffPtr = pData;
+    hi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hi2c->XferSize = 255;
+    }
+    else
+    {
+      hi2c->XferSize = Size;
+    }
+    
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+    }
+    else
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+    }
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c); 
+    
+    /* Note : The I2C interrupts must be enabled after unlocking current process 
+    to avoid the risk of I2C interrupt handle execution before current
+    process unlock */
+    
+    
+    /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+    /* possible to enable all of these */
+    /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+    __HAL_I2C_ENABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_TXI );
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  } 
+}
+
+/**
+  * @brief  Receive in master mode an amount of data in no-blocking mode with Interrupt
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_MASTER_BUSY_RX;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+    
+    hi2c->pBuffPtr = pData;
+    hi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hi2c->XferSize = 255;
+    }
+    else
+    {
+      hi2c->XferSize = Size;
+    }
+    
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+    }
+    else
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+    }
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c); 
+    
+    /* Note : The I2C interrupts must be enabled after unlocking current process 
+    to avoid the risk of I2C interrupt handle execution before current
+    process unlock */
+    
+    /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+    /* possible to enable all of these */
+    /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+    __HAL_I2C_ENABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI );
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  } 
+}
+
+/**
+  * @brief  Transmit in slave mode an amount of data in no-blocking mode with Interrupt 
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_SLAVE_BUSY_TX;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+    
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+    
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c); 
+    
+    /* Note : The I2C interrupts must be enabled after unlocking current process 
+    to avoid the risk of I2C interrupt handle execution before current
+    process unlock */
+    
+    /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+    /* possible to enable all of these */
+    /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+    __HAL_I2C_ENABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_TXI );
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  } 
+}
+
+/**
+  * @brief  Receive in slave mode an amount of data in no-blocking mode with Interrupt 
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_SLAVE_BUSY_RX;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+    
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+    
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c); 
+    
+    /* Note : The I2C interrupts must be enabled after unlocking current process 
+    to avoid the risk of I2C interrupt handle execution before current
+    process unlock */
+    
+    /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+    /* possible to enable all of these */
+    /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+    __HAL_I2C_ENABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief  Transmit in master mode an amount of data in no-blocking mode with DMA
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }     
+    
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_MASTER_BUSY_TX;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+    
+    hi2c->pBuffPtr = pData;
+    hi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hi2c->XferSize = 255;
+    }
+    else
+    {
+      hi2c->XferSize = Size;
+    }
+    
+    /* Set the I2C DMA transfer complete callback */
+    hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
+    
+    /* Set the DMA error callback */
+    hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+    
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+    
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+    }
+    else
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
+    }  
+    
+    /* Wait until TXIS flag is set */
+    if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, I2C_TIMEOUT_TXIS) != HAL_OK)
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      
+      /* Abort DMA */
+      HAL_DMA_Abort(hi2c->hdmatx);
+      
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Enable DMA Request */
+    hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;   
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in master mode an amount of data in no-blocking mode with DMA 
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }  
+    
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_MASTER_BUSY_RX;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+    
+    hi2c->pBuffPtr = pData;
+    hi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hi2c->XferSize = 255;
+    }
+    else
+    {
+      hi2c->XferSize = Size;
+    }
+    
+    /* Set the I2C DMA transfer complete callback */
+    hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
+    
+    /* Set the DMA error callback */
+    hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+    
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+    
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+    }
+    else
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+    }
+    
+    /* Wait until RXNE flag is set */
+    if(I2C_WaitOnRXNEFlagUntilTimeout(hi2c, I2C_FLAG_RXNE) != HAL_OK)      
+    {
+      /* Abort DMA */
+      HAL_DMA_Abort(hi2c->hdmarx);
+      
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+	}
+    
+    /* Enable DMA Request */
+    hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;   
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit in slave mode an amount of data in no-blocking mode with DMA 
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }   
+    /* Process Locked */
+    __HAL_LOCK(hi2c); 
+    
+    hi2c->State = HAL_I2C_STATE_SLAVE_BUSY_TX;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+    
+    hi2c->pBuffPtr = pData;
+    hi2c->XferCount = Size;
+    hi2c->XferSize = Size;
+    
+    /* Set the I2C DMA transfer complete callback */
+    hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
+    
+    /* Set the DMA error callback */
+    hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+    
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+    
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+    
+    /* Wait until ADDR flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR) != HAL_OK)      
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+    
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_ADDR);
+    
+    /* If 10bits addressing mode is selected */
+    if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
+    {
+      /* Wait until ADDR flag is set */
+      if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR) != HAL_OK)      
+      {
+        /* Disable Address Acknowledge */
+        hi2c->Instance->CR2 |= I2C_CR2_NACK;
+        return HAL_TIMEOUT;
+      }
+      
+      /* Clear ADDR flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_ADDR);
+    }
+    
+    /* Wait until DIR flag is set Transmitter mode */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, I2C_TIMEOUT_BUSY) != HAL_OK)      
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+    
+    /* Enable DMA Request */
+    hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN; 
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive in slave mode an amount of data in no-blocking mode with DMA 
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
+{
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }   
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_SLAVE_BUSY_RX;
+    hi2c->ErrorCode   = HAL_I2C_ERROR_NONE;
+    
+    hi2c->pBuffPtr = pData;
+    hi2c->XferSize = Size;
+    hi2c->XferCount = Size;
+    
+    /* Set the I2C DMA transfer complete callback */
+    hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt;
+    
+    /* Set the DMA error callback */
+    hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+    
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, Size);
+    
+    /* Enable Address Acknowledge */
+    hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
+    
+    /* Wait until ADDR flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR) != HAL_OK)      
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+    
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_ADDR);
+    
+    /* Wait until DIR flag is set Receiver mode */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, I2C_TIMEOUT_DIR) != HAL_OK)      
+    {
+      /* Disable Address Acknowledge */
+      hi2c->Instance->CR2 |= I2C_CR2_NACK;
+      return HAL_TIMEOUT;
+    }
+    
+    /* Enable DMA Request */
+    hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;  
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief  Write an amount of data in blocking mode to a specific memory address
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t Sizetmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+  
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  { 
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+    
+    /* Send Slave Address and Memory Address */
+    if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Set NBYTES to write and reload if size > 255 */
+    /* Size > 255, need to set RELOAD bit */
+    if(Size > 255)
+    {
+      I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+      Sizetmp = 255;
+    }
+    else
+    {
+      I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+      Sizetmp = Size;
+    }
+    
+    do
+    {
+      /* Wait until TXIS flag is set */
+      if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+      {
+        if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+        {
+          return HAL_ERROR;
+        }
+        else
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+      
+      /* Write data to DR */
+      hi2c->Instance->TXDR = (*pData++);
+      Sizetmp--;
+      Size--;
+      
+      if((Sizetmp == 0)&&(Size!=0))
+      {
+        /* Wait until TCR flag is set */
+        if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout) != HAL_OK)      
+        {
+          return HAL_TIMEOUT;
+        }
+        
+        
+        if(Size > 255)
+        {
+          I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+          Sizetmp = 255;
+        }
+        else
+        {
+          I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+          Sizetmp = Size;
+        }
+      }
+      
+    }while(Size > 0);
+    
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */ 
+    if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+  	
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_READY; 	  
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Read an amount of data in blocking mode from a specific memory address
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t Sizetmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+  
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {    
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+    
+    /* Send Slave Address and Memory Address */
+    if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    /* Size > 255, need to set RELOAD bit */
+    if(Size > 255)
+    {
+      I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+      Sizetmp = 255;
+    }
+    else
+    {
+      I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+      Sizetmp = Size;
+    }
+    
+    do
+    {  
+      /* Wait until RXNE flag is set */
+      if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)      
+      {
+        return HAL_TIMEOUT;
+      }
+      
+      /* Read data from RXDR */
+      (*pData++) = hi2c->Instance->RXDR;
+      
+      /* Decrement the Size counter */
+      Sizetmp--;
+      Size--;   
+      
+      if((Sizetmp == 0)&&(Size!=0))
+      {
+        /* Wait until TCR flag is set */
+        if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout) != HAL_OK)      
+        {
+          return HAL_TIMEOUT;
+        }
+        
+        if(Size > 255)
+        {
+          I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+          Sizetmp = 255;
+        }
+        else
+        {
+          I2C_TransferConfig(hi2c,DevAddress,Size, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+          Sizetmp = Size;
+        }
+      }
+      
+    }while(Size > 0);
+    
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */ 
+    if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+  	
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief  Write an amount of data in no-blocking mode with Interrupt to a specific memory address
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+  
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+    
+    hi2c->pBuffPtr = pData;
+    hi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hi2c->XferSize = 255;
+    }
+    else
+    {
+      hi2c->XferSize = Size;
+    }
+    
+    /* Send Slave Address and Memory Address */
+    if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Set NBYTES to write and reload if size > 255 */
+    /* Size > 255, need to set RELOAD bit */
+    if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+    }
+    else
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+    }  
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c); 
+    
+    /* Note : The I2C interrupts must be enabled after unlocking current process 
+    to avoid the risk of I2C interrupt handle execution before current
+    process unlock */
+    
+    /* Enable ERR, TC, STOP, NACK, TXI interrupt */
+    /* possible to enable all of these */
+    /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+    __HAL_I2C_ENABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_TXI );
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Read an amount of data in no-blocking mode with Interrupt from a specific memory address
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+  
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX;
+    
+    hi2c->pBuffPtr = pData;
+    hi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hi2c->XferSize = 255;
+    }
+    else
+    {
+      hi2c->XferSize = Size;
+    }
+    
+    /* Send Slave Address and Memory Address */
+    if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    /* Size > 255, need to set RELOAD bit */
+    if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+    }
+    else
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+    }
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c); 
+    
+    /* Note : The I2C interrupts must be enabled after unlocking current process 
+    to avoid the risk of I2C interrupt handle execution before current
+    process unlock */
+    
+    /* Enable ERR, TC, STOP, NACK, RXI interrupt */
+    /* possible to enable all of these */
+    /* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
+    __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_RXI );
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }   
+}
+/**
+  * @brief  Write an amount of data in no-blocking mode with DMA to a specific memory address
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+  
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+    
+    hi2c->pBuffPtr = pData;
+    hi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hi2c->XferSize = 255;
+    }
+    else
+    {
+      hi2c->XferSize = Size;
+    }
+    
+    /* Set the I2C DMA transfer complete callback */
+    hi2c->hdmatx->XferCpltCallback = I2C_DMAMemTransmitCplt;
+    
+    /* Set the DMA error callback */
+    hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
+    
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+    
+    /* Send Slave Address and Memory Address */
+    if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Send Slave Address */
+    /* Set NBYTES to write and reload if size > 255 */
+    if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+    }
+    else
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+    }
+    
+    /* Wait until TXIS flag is set */
+    if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, I2C_TIMEOUT_TXIS) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Enable DMA Request */
+    hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;  
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Reads an amount of data in no-blocking mode with DMA from a specific memory address.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be read
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
+  
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX;
+    
+    hi2c->pBuffPtr = pData;
+    hi2c->XferCount = Size;
+    if(Size > 255)
+    {
+      hi2c->XferSize = 255;
+    }
+    else
+    {
+      hi2c->XferSize = Size;
+    }
+    
+    /* Set the I2C DMA transfer complete callback */
+    hi2c->hdmarx->XferCpltCallback = I2C_DMAMemReceiveCplt;
+    
+    /* Set the DMA error callback */
+    hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
+    
+    /* Enable the DMA channel */
+    HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
+    
+    /* Send Slave Address and Memory Address */
+    if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_ERROR;
+      }
+      else
+      {
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Set NBYTES to write and reload if size > 255 and generate RESTART */
+    if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
+    }
+    else
+    {
+      I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
+    }
+    
+    /* Wait until RXNE flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, I2C_TIMEOUT_RXNE) != HAL_OK)      
+    {
+      return HAL_TIMEOUT;
+    }
+    
+    /* Enable DMA Request */
+    hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;  
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Checks if target device is ready for communication. 
+  * @note   This function is used with Memory devices
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  Trials: Number of trials
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
+{  
+  uint32_t tickstart = 0;
+  
+  __IO uint32_t I2C_Trials = 0;
+  
+  if(hi2c->State == HAL_I2C_STATE_READY)
+  {
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
+    {
+      return HAL_BUSY;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2c);
+    
+    hi2c->State = HAL_I2C_STATE_BUSY;
+    hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+    
+    do
+    {
+      /* Generate Start */
+      hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode,DevAddress);
+      
+      /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+      /* Wait until STOPF flag is set or a NACK flag is set*/
+      tickstart = HAL_GetTick();
+      while((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET) && (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET) && (hi2c->State != HAL_I2C_STATE_TIMEOUT))
+      {
+      	if(Timeout != HAL_MAX_DELAY)
+      	{
+          if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+          {
+            /* Device is ready */
+            hi2c->State = HAL_I2C_STATE_READY;
+            /* Process Unlocked */
+            __HAL_UNLOCK(hi2c);         
+            return HAL_TIMEOUT;
+          }
+        } 
+      }
+      
+      /* Check if the NACKF flag has not been set */
+      if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET)
+      {
+        /* Wait until STOPF flag is reset */ 
+        if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        
+        /* Clear STOP Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+        
+        /* Device is ready */
+        hi2c->State = HAL_I2C_STATE_READY;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        
+        return HAL_OK;
+      }
+      else
+      {
+        /* Wait until STOPF flag is reset */ 
+        if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        
+        /* Clear NACK Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+        
+        /* Clear STOP Flag, auto generated with autoend*/
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+      }
+      
+      /* Check if the maximum allowed number of trials has been reached */
+      if (I2C_Trials++ == Trials)
+      {
+        /* Generate Stop */
+        hi2c->Instance->CR2 |= I2C_CR2_STOP;
+        
+        /* Wait until STOPF flag is reset */ 
+        if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+        
+        /* Clear STOP Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+      }      
+    }while(I2C_Trials < Trials);
+    
+    hi2c->State = HAL_I2C_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_TIMEOUT;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @}
+  */
+
+/** @defgroup IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */   
+
+/**
+  * @brief  This function handles I2C event interrupt request.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+  /* I2C in mode Transmitter ---------------------------------------------------*/
+  if (((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TCR) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TC) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET)) && (__HAL_I2C_GET_IT_SOURCE(hi2c, (I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI | I2C_IT_ADDRI)) == SET))
+  {     
+    /* Slave mode selected */
+    if (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_TX)
+    {
+      I2C_SlaveTransmit_ISR(hi2c);
+    }
+  }
+  
+  if (((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TCR) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TC) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)) && (__HAL_I2C_GET_IT_SOURCE(hi2c, (I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI)) == SET))
+  {     
+    /* Master mode selected */
+    if ((hi2c->State == HAL_I2C_STATE_MASTER_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_MEM_BUSY_TX))
+    {
+      I2C_MasterTransmit_ISR(hi2c);
+    }
+  }
+  
+  /* I2C in mode Receiver ----------------------------------------------------*/
+  if (((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TCR) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TC) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET)) && (__HAL_I2C_GET_IT_SOURCE(hi2c, (I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_RXI | I2C_IT_ADDRI)) == SET))
+  {
+    /* Slave mode selected */
+    if (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_RX)
+    {
+      I2C_SlaveReceive_ISR(hi2c);
+    }
+  } 
+  if (((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TCR) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TC) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET) || (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)) && (__HAL_I2C_GET_IT_SOURCE(hi2c, (I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_RXI)) == SET))
+  {
+    /* Master mode selected */
+    if ((hi2c->State == HAL_I2C_STATE_MASTER_BUSY_RX) || (hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX))
+    {
+      I2C_MasterReceive_ISR(hi2c);
+    }
+  } 
+}
+
+/**
+  * @brief  This function handles I2C error interrupt request.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c)
+{
+  /* I2C Bus error interrupt occurred ------------------------------------*/
+  if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BERR) == SET) && (__HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERRI) == SET))
+  { 
+    hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
+    
+    /* Clear BERR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR);
+  }
+  
+  /* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
+  if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_OVR) == SET) && (__HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERRI) == SET))
+  { 
+    hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
+    
+    /* Clear OVR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR);
+  }
+  
+  /* I2C Arbitration Loss error interrupt occurred -------------------------------------*/
+  if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ARLO) == SET) && (__HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERRI) == SET))
+  { 
+    hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
+    
+    /* Clear ARLO flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO);
+  }
+  
+  /* Call the Error Callback in case of Error detected */
+  if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+  {
+    hi2c->State = HAL_I2C_STATE_READY;
+    
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+}
+
+/**
+  * @brief  Master Tx Transfer completed callbacks.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+ __weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_TxCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Master Rx Transfer completed callbacks.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/** @brief  Slave Tx Transfer completed callbacks.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+ __weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_TxCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Slave Rx Transfer completed callbacks.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Memory Tx Transfer completed callbacks.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+ __weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+    
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_TxCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Memory Rx Transfer completed callbacks.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  I2C error callbacks.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval None
+  */
+ __weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2c);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2C_ErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Exported_Functions_Group3 Peripheral State and Errors functions
+ *  @brief   Peripheral State and Errors functions
+ *
+@verbatim   
+ ===============================================================================
+            ##### Peripheral State and Errors functions #####
+ ===============================================================================  
+    [..]
+    This subsection permit to get in run-time the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the I2C state.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval HAL state
+  */
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c)
+{
+  return hi2c->State;
+}
+
+/**
+  * @brief  Return the I2C error code
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *              the configuration information for the specified I2C.
+* @retval I2C Error Code
+*/
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
+{
+  return hi2c->ErrorCode;
+}
+
+/**
+  * @}
+  */  
+
+/**
+  * @}
+  */
+
+/** @addtogroup I2C_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Handle Interrupt Flags Master Transmit Mode
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_MasterTransmit_ISR(I2C_HandleTypeDef *hi2c) 
+{
+  uint16_t DevAddress;
+  
+  /* Process Locked */
+  __HAL_LOCK(hi2c); 
+  
+  if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == SET)
+  {
+    /* Write data to TXDR */
+    hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+    hi2c->XferSize--;
+    hi2c->XferCount--;	
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TCR) == SET)
+  {
+    if((hi2c->XferSize == 0)&&(hi2c->XferCount!=0))
+    {
+      DevAddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+      
+      if(hi2c->XferCount > 255)
+      {    
+        I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+        hi2c->XferSize = 255;
+      }
+      else
+      {
+        I2C_TransferConfig(hi2c,DevAddress,hi2c->XferCount, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+        hi2c->XferSize = hi2c->XferCount;
+      }
+    }
+    else
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      
+      /* Wrong size Status regarding TCR flag event */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_SIZE;
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TC) == SET)
+  {
+    if(hi2c->XferCount == 0)
+    {
+      /* Generate Stop */
+      hi2c->Instance->CR2 |= I2C_CR2_STOP;
+    }
+    else
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      
+      /* Wrong size Status regarding TCR flag event */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_SIZE;
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+  {
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+    {
+      /* Clear NACK Flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+      
+      hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+    }
+    
+    /* Disable ERR, TC, STOP, NACK, TXI interrupt */
+    __HAL_I2C_DISABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_TXI );
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+    
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+    
+    /* Flush TX register if not empty */
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET)
+    {
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE);
+    }
+    
+    /* Call the correct callback to inform upper layer */
+    if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+    {
+      hi2c->State = HAL_I2C_STATE_READY;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+    else
+    {
+      if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_TX)
+      {
+        hi2c->State = HAL_I2C_STATE_READY;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        
+        HAL_I2C_MemTxCpltCallback(hi2c);
+      }
+      else
+      {
+        hi2c->State = HAL_I2C_STATE_READY;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        
+        HAL_I2C_MasterTxCpltCallback(hi2c);
+      }
+    }
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+  {
+    /* Clear NACK Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2c);
+  
+  return HAL_OK;    
+}  
+
+/**
+  * @brief  Handle Interrupt Flags Master Receive Mode
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_MasterReceive_ISR(I2C_HandleTypeDef *hi2c) 
+{
+  uint16_t DevAddress;
+  
+  /* Process Locked */
+  __HAL_LOCK(hi2c);
+  
+  if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET)
+  {  
+    /* Read data from RXDR */
+    (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+    hi2c->XferSize--;
+    hi2c->XferCount--;
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TCR) == SET)
+  {
+    if((hi2c->XferSize == 0)&&(hi2c->XferCount!=0))
+    {                  
+      DevAddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+      
+      if(hi2c->XferCount > 255)
+      {
+        I2C_TransferConfig(hi2c,DevAddress,255, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+        hi2c->XferSize = 255;
+      }      
+      else
+      {    
+        I2C_TransferConfig(hi2c,DevAddress,hi2c->XferCount, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+        hi2c->XferSize = hi2c->XferCount;
+      } 
+    } 
+    else
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      
+      /* Wrong size Status regarding TCR flag event */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_SIZE;
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TC) == SET)
+  {
+    if(hi2c->XferCount == 0)
+    {
+      /* Generate Stop */
+      hi2c->Instance->CR2 |= I2C_CR2_STOP;
+    }
+    else
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      
+      /* Wrong size Status regarding TCR flag event */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_SIZE;
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+  {
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+    {
+      /* Clear NACK Flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+      
+      hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+    }
+    
+    /* Disable ERR, TC, STOP, NACK, TXI interrupt */
+    __HAL_I2C_DISABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_RXI );
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+    
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+    
+    /* Call the correct callback to inform upper layer */
+    if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+    {
+      hi2c->State = HAL_I2C_STATE_READY;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+    else
+    {
+      if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX)
+      {
+        hi2c->State = HAL_I2C_STATE_READY;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        
+        HAL_I2C_MemRxCpltCallback(hi2c);
+      }
+      else
+      {
+        hi2c->State = HAL_I2C_STATE_READY;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        
+        HAL_I2C_MasterRxCpltCallback(hi2c);
+      }
+    }
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+  {
+    /* Clear NACK Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2c); 
+  
+  return HAL_OK; 
+  
+}  
+
+/**
+  * @brief  Handle Interrupt Flags Slave Transmit Mode
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_SlaveTransmit_ISR(I2C_HandleTypeDef *hi2c) 
+{
+  /* Process locked */
+  __HAL_LOCK(hi2c);
+  
+  if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) != RESET)
+  {
+    /* Check that I2C transfer finished */
+    /* if yes, normal usecase, a NACK is sent by the MASTER when Transfer is finished */
+    /* Mean XferCount == 0*/
+    /* So clear Flag NACKF only */
+    if(hi2c->XferCount == 0)
+    {
+      /* Clear NACK Flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+    }
+    else
+    {
+      /* if no, error usecase, a Non-Acknowledge of last Data is generated by the MASTER*/
+      /* Clear NACK Flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+      
+      /* Set ErrorCode corresponding to a Non-Acknowledge */
+      hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      
+      /* Call the Error callback to prevent upper layer */
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET)
+  {
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+  }
+  /* Check first if STOPF is set          */
+  /* to prevent a Write Data in TX buffer */
+  /* which is stuck in TXDR until next    */
+  /* communication with Master            */
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+  {
+    /* Disable ERRI, TCI, STOPI, NACKI, ADDRI, RXI, TXI interrupt */
+    __HAL_I2C_DISABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI );
+    
+    /* Disable Address Acknowledge */
+    hi2c->Instance->CR2 |= I2C_CR2_NACK;
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+    
+    hi2c->State = HAL_I2C_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    HAL_I2C_SlaveTxCpltCallback(hi2c);
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == SET)
+  {
+    /* Write data to TXDR only if XferCount not reach "0" */
+    /* A TXIS flag can be set, during STOP treatment      */
+    if(hi2c->XferCount > 0)
+    {
+      /* Write data to TXDR */
+      hi2c->Instance->TXDR = (*hi2c->pBuffPtr++);
+      hi2c->XferCount--;
+    }
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2c);
+  
+  return HAL_OK;
+}  
+
+/**
+  * @brief  Handle Interrupt Flags Slave Receive Mode
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_SlaveReceive_ISR(I2C_HandleTypeDef *hi2c) 
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2c);
+  
+  if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) != RESET)
+  {
+    /* Clear NACK Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET)
+  {
+    /* Clear ADDR flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET)
+  {
+    /* Read data from RXDR */
+    (*hi2c->pBuffPtr++) = hi2c->Instance->RXDR;
+    hi2c->XferSize--;
+    hi2c->XferCount--;
+  }
+  else if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+  {
+    /* Disable ERRI, TCI, STOPI, NACKI, ADDRI, RXI, TXI interrupt */
+    __HAL_I2C_DISABLE_IT(hi2c,I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_RXI );
+    
+    /* Disable Address Acknowledge */
+    hi2c->Instance->CR2 |= I2C_CR2_NACK;
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+    
+    hi2c->State = HAL_I2C_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    HAL_I2C_SlaveRxCpltCallback(hi2c);
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2c);
+  
+  return HAL_OK;     
+}  
+
+/**
+  * @brief  Master sends target device address followed by internal memory address for write request.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout)   
+{
+  I2C_TransferConfig(hi2c,DevAddress,MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
+  
+  /* Wait until TXIS flag is set */
+  if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+  {
+    if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  /* If Memory address size is 8Bit */
+  if(MemAddSize == I2C_MEMADD_SIZE_8BIT)
+  {
+    /* Send Memory Address */
+    hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);    
+  }      
+  /* If Memory address size is 16Bit */
+  else
+  {
+    /* Send MSB of Memory Address */
+    hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); 
+    
+    /* Wait until TXIS flag is set */
+    if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Send LSB of Memory Address */
+    hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);  
+  }
+  
+  /* Wait until TCR flag is set */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout) != HAL_OK)      
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Master sends target device address followed by internal memory address for read request.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  DevAddress: Target device address
+  * @param  MemAddress: Internal memory address
+  * @param  MemAddSize: Size of internal memory address
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout)
+{
+  I2C_TransferConfig(hi2c,DevAddress,MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE);
+  
+  /* Wait until TXIS flag is set */
+  if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+  {
+    if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+    {
+      return HAL_ERROR;
+    }
+    else
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  /* If Memory address size is 8Bit */
+  if(MemAddSize == I2C_MEMADD_SIZE_8BIT)
+  {
+    /* Send Memory Address */
+    hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);    
+  }      
+  /* If Memory address size is 16Bit */
+  else
+  {
+    /* Send MSB of Memory Address */
+    hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress); 
+    
+    /* Wait until TXIS flag is set */
+    if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        return HAL_ERROR;
+      }
+      else
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Send LSB of Memory Address */
+    hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);  
+  }
+  
+  /* Wait until TC flag is set */
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout) != HAL_OK)      
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  DMA I2C master transmit process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma) 
+{
+  uint16_t DevAddress;
+  I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  
+  /* Check if last DMA request was done with RELOAD */
+  /* Set NBYTES to write and reload if size > 255 */
+  if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+  {
+    /* Wait until TCR flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, I2C_TIMEOUT_TCR) != HAL_OK)      
+    {
+      hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+    }
+    
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; 
+    
+    /* Check if Errors has been detected during transfer */
+    if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+    {
+      /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+      /* Wait until STOPF flag is reset */ 
+      if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+      {
+        if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+        {
+          hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+        }
+        else
+        {
+          hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+        }
+      }
+      
+      /* Clear STOP Flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+      
+      /* Clear Configuration Register 2 */
+      I2C_RESET_CR2(hi2c);
+      
+      hi2c->XferCount = 0;
+      
+      hi2c->State = HAL_I2C_STATE_READY;
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+    else
+    {
+      hi2c->pBuffPtr += hi2c->XferSize;
+      hi2c->XferCount -= hi2c->XferSize;
+      if(hi2c->XferCount > 255)
+      {
+        hi2c->XferSize = 255;
+      }
+      else
+      {
+        hi2c->XferSize = hi2c->XferCount;
+      }
+      
+      DevAddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+      
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+      
+      /* Send Slave Address */
+      /* Set NBYTES to write and reload if size > 255 */
+      if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+      {
+        I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+      }
+      else
+      {
+        I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+      }  
+      
+      /* Wait until TXIS flag is set */
+      if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, I2C_TIMEOUT_TXIS) != HAL_OK)
+      {
+        /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+        /* Wait until STOPF flag is reset */ 
+        if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+        {
+          if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+          {
+            hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+          }
+          else
+          {
+            hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+          }
+        }
+        
+        /* Clear STOP Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+        
+        /* Clear Configuration Register 2 */
+        I2C_RESET_CR2(hi2c);
+        
+        hi2c->XferCount = 0;
+        
+        hi2c->State = HAL_I2C_STATE_READY;
+        HAL_I2C_ErrorCallback(hi2c);
+      }
+      else
+      {
+        /* Enable DMA Request */
+        hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+      }
+    }
+  }
+  else
+  {
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */ 
+    if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+      }
+      else
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+      }
+    }
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+  	
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+    
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; 
+    
+    hi2c->XferCount = 0;
+    
+    hi2c->State = HAL_I2C_STATE_READY;
+    
+    /* Check if Errors has been detected during transfer */
+    if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+    {
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+    else
+    {
+      HAL_I2C_MasterTxCpltCallback(hi2c);
+    }
+  }
+}
+
+/**
+  * @brief  DMA I2C slave transmit process complete callback. 
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma) 
+{
+  I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  
+  /* Wait until STOP flag is set */
+  if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+  {
+    if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+    {
+      /* Normal Use case, a AF is generated by master */
+      /* to inform slave the end of transfer */
+      hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+    }
+    else
+    {
+      hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+    }
+  }
+  
+  /* Clear STOP flag */
+  __HAL_I2C_CLEAR_FLAG(hi2c,I2C_FLAG_STOPF);
+  
+  /* Wait until BUSY flag is reset */ 
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY) != HAL_OK)      
+  {
+    hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+  }
+  
+  /* Disable DMA Request */
+  hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; 
+  
+  hi2c->XferCount = 0;
+  
+  hi2c->State = HAL_I2C_STATE_READY;
+  
+  /* Check if Errors has been detected during transfer */
+  if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+  {
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+  else
+  {
+    HAL_I2C_SlaveTxCpltCallback(hi2c);
+  }
+}
+
+/**
+  * @brief DMA I2C master receive process complete callback 
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma) 
+{
+  I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  uint16_t DevAddress;
+  
+  /* Check if last DMA request was done with RELOAD */
+  /* Set NBYTES to write and reload if size > 255 */
+  if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+  {
+    /* Wait until TCR flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, I2C_TIMEOUT_TCR) != HAL_OK)      
+    {
+      hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+    }
+    
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; 
+    
+    /* Check if Errors has been detected during transfer */
+    if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+    {
+      /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+      /* Wait until STOPF flag is reset */ 
+      if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+      {
+        if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+        {
+          hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+        }
+        else
+        {
+          hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+        }
+      }
+      
+      /* Clear STOP Flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+      
+      /* Clear Configuration Register 2 */
+      I2C_RESET_CR2(hi2c);
+      
+      hi2c->XferCount = 0;
+      
+      hi2c->State = HAL_I2C_STATE_READY;
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+    else
+    {
+      hi2c->pBuffPtr += hi2c->XferSize;
+      hi2c->XferCount -= hi2c->XferSize;
+      if(hi2c->XferCount > 255)
+      {
+        hi2c->XferSize = 255;
+      }
+      else
+      {
+        hi2c->XferSize = hi2c->XferCount;
+      }
+      
+      DevAddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+      
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+      
+      /* Send Slave Address */
+      /* Set NBYTES to write and reload if size > 255 */
+      if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+      {
+        I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+      }
+      else
+      {
+        I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+      }  
+      
+      /* Wait until RXNE flag is set */
+      if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, I2C_TIMEOUT_RXNE) != HAL_OK)      
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+      }
+      
+      /* Check if Errors has been detected during transfer */
+      if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+      {
+        /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+        /* Wait until STOPF flag is reset */ 
+        if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+        {
+          if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+          {
+            hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+          }
+          else
+          {
+            hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+          }
+        }
+        
+        /* Clear STOP Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+        
+        /* Clear Configuration Register 2 */
+        I2C_RESET_CR2(hi2c);
+        
+        hi2c->XferCount = 0;
+        
+        hi2c->State = HAL_I2C_STATE_READY;
+        
+        HAL_I2C_ErrorCallback(hi2c);
+      }
+      else
+      {
+        /* Enable DMA Request */
+        hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+      }
+    }
+  }
+  else
+  {
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */ 
+    if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+      }
+      else
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+      }
+    }
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+  	
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+    
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; 
+    
+    hi2c->XferCount = 0;
+    
+    hi2c->State = HAL_I2C_STATE_READY;
+    
+    /* Check if Errors has been detected during transfer */
+    if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+    {
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+    else
+    {
+      HAL_I2C_MasterRxCpltCallback(hi2c);
+    }
+  }
+}
+
+/**
+  * @brief  DMA I2C slave receive process complete callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma) 
+{  
+  I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  
+  /* Wait until STOPF flag is reset */ 
+  if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+  {
+    if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+    {
+      hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+    }
+    else
+    {
+      hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+    }
+  }
+  
+  /* Clear STOPF flag */
+  __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+  
+  /* Wait until BUSY flag is reset */ 
+  if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY) != HAL_OK)      
+  {
+    hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+  }
+  
+  /* Disable DMA Request */
+  hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; 
+  
+  /* Disable Address Acknowledge */
+  hi2c->Instance->CR2 |= I2C_CR2_NACK;
+  
+  hi2c->XferCount = 0;
+  
+  hi2c->State = HAL_I2C_STATE_READY;
+  
+  /* Check if Errors has been detected during transfer */
+  if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+  {
+    HAL_I2C_ErrorCallback(hi2c);
+  }
+  else
+  {
+    HAL_I2C_SlaveRxCpltCallback(hi2c);
+  }
+}
+
+/**
+  * @brief DMA I2C Memory Write process complete callback 
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void I2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma)   
+{
+  uint16_t DevAddress;
+  I2C_HandleTypeDef* hi2c = ( I2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* Check if last DMA request was done with RELOAD */
+  /* Set NBYTES to write and reload if size > 255 */
+  if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+  {
+    /* Wait until TCR flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, I2C_TIMEOUT_TCR) != HAL_OK)      
+    {
+      hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+    }
+    
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; 
+    
+    /* Check if Errors has been detected during transfer */
+    if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+    {
+      /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+      /* Wait until STOPF flag is reset */ 
+      if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+      {
+        if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+        {
+          hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+        }
+        else
+        {
+          hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+        }
+      }
+      
+      /* Clear STOP Flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+      
+      /* Clear Configuration Register 2 */
+      I2C_RESET_CR2(hi2c);
+      
+      hi2c->XferCount = 0;
+      
+      hi2c->State = HAL_I2C_STATE_READY;
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+    else
+    {
+      hi2c->pBuffPtr += hi2c->XferSize;
+      hi2c->XferCount -= hi2c->XferSize;
+      if(hi2c->XferCount > 255)
+      {
+        hi2c->XferSize = 255;
+      }
+      else
+      {
+        hi2c->XferSize = hi2c->XferCount;
+      }
+      
+      DevAddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+      
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
+      
+      /* Send Slave Address */
+      /* Set NBYTES to write and reload if size > 255 */
+      if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+      {
+        I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+      }
+      else
+      {
+        I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+      }  
+      
+      /* Wait until TXIS flag is set */
+      if(I2C_WaitOnTXISFlagUntilTimeout(hi2c, I2C_TIMEOUT_TXIS) != HAL_OK)
+      {
+        /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+        /* Wait until STOPF flag is reset */ 
+        if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+        {
+          if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+          {
+            hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+          }
+          else
+          {
+            hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+          }
+        }
+        
+        /* Clear STOP Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+        
+        /* Clear Configuration Register 2 */
+        I2C_RESET_CR2(hi2c);
+        
+        hi2c->XferCount = 0;
+        
+        hi2c->State = HAL_I2C_STATE_READY;
+        HAL_I2C_ErrorCallback(hi2c);
+      }
+      else
+      {
+        /* Enable DMA Request */
+        hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
+      }
+    }
+  }
+  else
+  {
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */ 
+    if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+      }
+      else
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+      }
+    }
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+  	
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+    
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN; 
+    
+    hi2c->XferCount = 0;
+    
+    hi2c->State = HAL_I2C_STATE_READY;
+    
+    /* Check if Errors has been detected during transfer */
+    if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+    {
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+    else
+    {
+      HAL_I2C_MemTxCpltCallback(hi2c);
+    }
+  }
+}
+
+/**
+  * @brief  DMA I2C Memory Read process complete callback
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void I2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma)   
+{  
+  I2C_HandleTypeDef* hi2c = ( I2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;  
+  uint16_t DevAddress;
+  
+  /* Check if last DMA request was done with RELOAD */
+  /* Set NBYTES to write and reload if size > 255 */
+  if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+  {
+    /* Wait until TCR flag is set */
+    if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, I2C_TIMEOUT_TCR) != HAL_OK)      
+    {
+      hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+    }
+    
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; 
+    
+    /* Check if Errors has been detected during transfer */
+    if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+    {
+      /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+      /* Wait until STOPF flag is reset */ 
+      if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+      {
+        if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+        {
+          hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+        }
+        else
+        {
+          hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+        }
+      }
+      
+      /* Clear STOP Flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+      
+      /* Clear Configuration Register 2 */
+      I2C_RESET_CR2(hi2c);
+      
+      hi2c->XferCount = 0;
+      
+      hi2c->State = HAL_I2C_STATE_READY;
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+    else
+    {
+      hi2c->pBuffPtr += hi2c->XferSize;
+      hi2c->XferCount -= hi2c->XferSize;
+      if(hi2c->XferCount > 255)
+      {
+        hi2c->XferSize = 255;
+      }
+      else
+      {
+        hi2c->XferSize = hi2c->XferCount;
+      }
+      
+      DevAddress = (hi2c->Instance->CR2 & I2C_CR2_SADD);
+      
+      /* Enable the DMA channel */
+      HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize);
+      
+      /* Send Slave Address */
+      /* Set NBYTES to write and reload if size > 255 */
+      if( (hi2c->XferSize == 255) && (hi2c->XferSize < hi2c->XferCount) )
+      {
+        I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
+      }
+      else
+      {
+        I2C_TransferConfig(hi2c,DevAddress,hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
+      }  
+      
+      /* Wait until RXNE flag is set */
+      if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, I2C_TIMEOUT_RXNE) != HAL_OK)      
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+      }
+      
+      /* Check if Errors has been detected during transfer */
+      if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+      {
+        /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+        /* Wait until STOPF flag is reset */ 
+        if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+        {
+          if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+          {
+            hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+          }
+          else
+          {
+            hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+          }
+        }
+        
+        /* Clear STOP Flag */
+        __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+        
+        /* Clear Configuration Register 2 */
+        I2C_RESET_CR2(hi2c);
+        
+        hi2c->XferCount = 0;
+        
+        hi2c->State = HAL_I2C_STATE_READY;
+        HAL_I2C_ErrorCallback(hi2c);
+      }
+      else
+      {
+        /* Enable DMA Request */
+        hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
+      }
+    }
+  }
+  else
+  {
+    /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
+    /* Wait until STOPF flag is reset */ 
+    if(I2C_WaitOnSTOPFlagUntilTimeout(hi2c, I2C_TIMEOUT_STOPF) != HAL_OK)
+    {
+      if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
+      }
+      else
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+      }
+    }
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+  	
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+    
+    /* Disable DMA Request */
+    hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN; 
+    
+    hi2c->XferCount = 0;
+    
+    hi2c->State = HAL_I2C_STATE_READY;
+    
+    /* Check if Errors has been detected during transfer */
+    if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
+    {
+      HAL_I2C_ErrorCallback(hi2c);
+    }
+    else
+    {
+      HAL_I2C_MemRxCpltCallback(hi2c);
+    }
+  }
+}
+
+/**
+  * @brief  DMA I2C communication error callback. 
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void I2C_DMAError(DMA_HandleTypeDef *hdma)   
+{
+  I2C_HandleTypeDef* hi2c = ( I2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* Disable Acknowledge */
+  hi2c->Instance->CR2 |= I2C_CR2_NACK;
+  
+  hi2c->XferCount = 0;
+  
+  hi2c->State = HAL_I2C_STATE_READY;
+  
+  hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
+  
+  HAL_I2C_ErrorCallback(hi2c);
+}
+
+/**
+  * @brief  This function handles I2C Communication Timeout.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  Flag: specifies the I2C flag to check.
+  * @param  Status: The new Flag status (SET or RESET).
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout)  
+{  
+  uint32_t tickstart = HAL_GetTick();
+  
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {    
+    while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          hi2c->State= HAL_I2C_STATE_READY;
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2c);
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_I2C_GET_FLAG(hi2c, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          hi2c->State= HAL_I2C_STATE_READY;
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2c);
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles I2C Communication Timeout for specific usage of TXIS flag.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout)  
+{  
+  uint32_t tickstart = HAL_GetTick();
+  
+  while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)
+  {
+    /* Check if a NACK is detected */
+    if(I2C_IsAcknowledgeFailed(hi2c, Timeout) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+    
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+        hi2c->State= HAL_I2C_STATE_READY;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2c);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  return HAL_OK;      
+}
+
+/**
+  * @brief  This function handles I2C Communication Timeout for specific usage of STOP flag.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout)
+{  
+  uint32_t tickstart = 0x00;
+  tickstart = HAL_GetTick();
+  
+  while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+  {
+    /* Check if a NACK is detected */
+    if(I2C_IsAcknowledgeFailed(hi2c, Timeout) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+    
+    /* Check for the Timeout */
+    if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+    {
+      hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+      hi2c->State= HAL_I2C_STATE_READY;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles I2C Communication Timeout for specific usage of RXNE flag.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout)
+{  
+  uint32_t tickstart = 0x00;
+  tickstart = HAL_GetTick();
+  
+  while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)
+  {
+    /* Check if a NACK is detected */
+    if(I2C_IsAcknowledgeFailed(hi2c, Timeout) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+    
+    /* Check if a STOPF is detected */
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
+    {
+      /* Clear STOP Flag */
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+      
+      /* Clear Configuration Register 2 */
+      I2C_RESET_CR2(hi2c);
+      
+      hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+      hi2c->State= HAL_I2C_STATE_READY;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      
+      return HAL_ERROR;
+    }
+    
+    /* Check for the Timeout */
+    if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+    {
+      hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
+      hi2c->State= HAL_I2C_STATE_READY;
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hi2c);
+      
+      return HAL_TIMEOUT;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles Acknowledge failed detection during an I2C Communication.
+  * @param  hi2c : Pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2C.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout)
+{
+  uint32_t tickstart = 0x00;
+  tickstart = HAL_GetTick();
+  
+  if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
+  {
+    /* Wait until STOP Flag is reset */
+    /* AutoEnd should be initiate after AF */
+    while(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          hi2c->State= HAL_I2C_STATE_READY;
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2c);
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    
+    /* Clear NACKF Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
+    
+    /* Clear STOP Flag */
+    __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
+    
+    /* Flush TX register if not empty */
+    if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET)
+    {
+      __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE);
+    }
+    
+    /* Clear Configuration Register 2 */
+    I2C_RESET_CR2(hi2c);
+    
+    hi2c->ErrorCode = HAL_I2C_ERROR_AF;
+    hi2c->State= HAL_I2C_STATE_READY;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2c);
+    
+    return HAL_ERROR;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
+  * @param  hi2c: I2C handle.
+  * @param  DevAddress: specifies the slave address to be programmed.
+  * @param  Size: specifies the number of bytes to be programmed.
+  *   This parameter must be a value between 0 and 255.
+  * @param  Mode: new state of the I2C START condition generation.
+  *   This parameter can be one of the following values:
+  *     @arg I2C_RELOAD_MODE: Enable Reload mode .
+  *     @arg I2C_AUTOEND_MODE: Enable Automatic end mode.
+  *     @arg I2C_SOFTEND_MODE: Enable Software end mode.
+  * @param  Request: new state of the I2C START condition generation.
+  *   This parameter can be one of the following values:
+  *     @arg I2C_NO_STARTSTOP: Don't Generate stop and start condition.
+  *     @arg I2C_GENERATE_STOP: Generate stop condition (Size should be set to 0).
+  *     @arg I2C_GENERATE_START_READ: Generate Restart for read request.
+  *     @arg I2C_GENERATE_START_WRITE: Generate Restart for write request.
+  * @retval None
+  */
+static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c,  uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_TRANSFER_MODE(Mode));
+  assert_param(IS_TRANSFER_REQUEST(Request));
+  
+  /* Get the CR2 register value */
+  tmpreg = hi2c->Instance->CR2;
+  
+  /* clear tmpreg specific bits */
+  tmpreg &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP));
+  
+  /* update tmpreg */
+  tmpreg |= (uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) | (((uint32_t)Size << 16 ) & I2C_CR2_NBYTES) | \
+    (uint32_t)Mode | (uint32_t)Request);
+  
+  /* update CR2 register */
+  hi2c->Instance->CR2 = tmpreg;  
+}  
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_i2c.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,598 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_i2c.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of I2C HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_I2C_H
+#define __STM32F7xx_HAL_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"  
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2C
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup I2C_Exported_Types I2C Exported Types
+  * @{
+  */
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
+  * @brief  I2C Configuration Structure definition  
+  * @{
+  */
+typedef struct
+{
+  uint32_t Timing;              /*!< Specifies the I2C_TIMINGR_register value.
+                                  This parameter calculated by referring to I2C initialization 
+                                         section in Reference manual */
+
+  uint32_t OwnAddress1;         /*!< Specifies the first device own address.
+                                  This parameter can be a 7-bit or 10-bit address. */
+
+  uint32_t AddressingMode;      /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+                                  This parameter can be a value of @ref I2C_addressing_mode */
+
+  uint32_t DualAddressMode;     /*!< Specifies if dual addressing mode is selected.
+                                  This parameter can be a value of @ref I2C_dual_addressing_mode */
+
+  uint32_t OwnAddress2;         /*!< Specifies the second device own address if dual addressing mode is selected
+                                  This parameter can be a 7-bit address. */
+
+  uint32_t OwnAddress2Masks;    /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
+                                  This parameter can be a value of @ref I2C_own_address2_masks */
+
+  uint32_t GeneralCallMode;     /*!< Specifies if general call mode is selected.
+                                  This parameter can be a value of @ref I2C_general_call_addressing_mode */
+
+  uint32_t NoStretchMode;       /*!< Specifies if nostretch mode is selected.
+                                  This parameter can be a value of @ref I2C_nostretch_mode */
+
+}I2C_InitTypeDef;
+
+/** 
+  * @}
+  */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+  * @brief  HAL State structure definition  
+  * @{
+  */ 
+
+typedef enum
+{
+  HAL_I2C_STATE_RESET           = 0x00,  /*!< I2C not yet initialized or disabled         */
+  HAL_I2C_STATE_READY           = 0x01,  /*!< I2C initialized and ready for use           */
+  HAL_I2C_STATE_BUSY            = 0x02,  /*!< I2C internal process is ongoing             */
+  HAL_I2C_STATE_MASTER_BUSY_TX  = 0x12,  /*!< Master Data Transmission process is ongoing */
+  HAL_I2C_STATE_MASTER_BUSY_RX  = 0x22,  /*!< Master Data Reception process is ongoing    */
+  HAL_I2C_STATE_SLAVE_BUSY_TX   = 0x32,  /*!< Slave Data Transmission process is ongoing  */
+  HAL_I2C_STATE_SLAVE_BUSY_RX   = 0x42,  /*!< Slave Data Reception process is ongoing     */
+  HAL_I2C_STATE_MEM_BUSY_TX     = 0x52,  /*!< Memory Data Transmission process is ongoing */
+  HAL_I2C_STATE_MEM_BUSY_RX     = 0x62,  /*!< Memory Data Reception process is ongoing    */
+  HAL_I2C_STATE_TIMEOUT         = 0x03,  /*!< Timeout state                               */
+  HAL_I2C_STATE_ERROR           = 0x04   /*!< Reception process is ongoing                */
+}HAL_I2C_StateTypeDef;
+
+/** 
+  * @}
+  */
+
+/** @defgroup I2C_Error_Code_definition I2C Error Code definition
+  * @brief  I2C Error Code definition  
+  * @{
+  */ 
+#define HAL_I2C_ERROR_NONE      ((uint32_t)0x00000000)    /*!< No error              */
+#define HAL_I2C_ERROR_BERR      ((uint32_t)0x00000001)    /*!< BERR error            */
+#define HAL_I2C_ERROR_ARLO      ((uint32_t)0x00000002)    /*!< ARLO error            */
+#define HAL_I2C_ERROR_AF        ((uint32_t)0x00000004)    /*!< ACKF error            */
+#define HAL_I2C_ERROR_OVR       ((uint32_t)0x00000008)    /*!< OVR error             */
+#define HAL_I2C_ERROR_DMA       ((uint32_t)0x00000010)    /*!< DMA transfer error    */
+#define HAL_I2C_ERROR_TIMEOUT   ((uint32_t)0x00000020)    /*!< Timeout error         */
+#define HAL_I2C_ERROR_SIZE      ((uint32_t)0x00000040)    /*!< Size Management error */
+/** 
+  * @}
+  */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition 
+  * @brief  I2C handle Structure definition  
+  * @{
+  */
+typedef struct
+{
+  I2C_TypeDef                *Instance;  /*!< I2C registers base address     */
+
+  I2C_InitTypeDef            Init;       /*!< I2C communication parameters   */
+
+  uint8_t                    *pBuffPtr;  /*!< Pointer to I2C transfer buffer */
+
+  uint16_t                   XferSize;   /*!< I2C transfer size              */
+
+  __IO uint16_t              XferCount;  /*!< I2C transfer counter           */
+
+  DMA_HandleTypeDef          *hdmatx;    /*!< I2C Tx DMA handle parameters   */
+
+  DMA_HandleTypeDef          *hdmarx;    /*!< I2C Rx DMA handle parameters   */
+
+  HAL_LockTypeDef            Lock;       /*!< I2C locking object             */
+
+  __IO HAL_I2C_StateTypeDef  State;      /*!< I2C communication state        */
+
+  __IO uint32_t              ErrorCode;  /*!< I2C Error code                   */
+
+}I2C_HandleTypeDef;
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */  
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+  * @{
+  */
+
+/** @defgroup I2C_addressing_mode I2C addressing mode
+  * @{
+  */
+#define I2C_ADDRESSINGMODE_7BIT         ((uint32_t)0x00000001)
+#define I2C_ADDRESSINGMODE_10BIT        ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode
+  * @{
+  */
+#define I2C_DUALADDRESS_DISABLE         ((uint32_t)0x00000000)
+#define I2C_DUALADDRESS_ENABLE          I2C_OAR2_OA2EN
+/**
+  * @}
+  */
+
+/** @defgroup I2C_own_address2_masks I2C own address2 masks
+  * @{
+  */
+#define I2C_OA2_NOMASK                  ((uint8_t)0x00)
+#define I2C_OA2_MASK01                  ((uint8_t)0x01)
+#define I2C_OA2_MASK02                  ((uint8_t)0x02)
+#define I2C_OA2_MASK03                  ((uint8_t)0x03)
+#define I2C_OA2_MASK04                  ((uint8_t)0x04)
+#define I2C_OA2_MASK05                  ((uint8_t)0x05)
+#define I2C_OA2_MASK06                  ((uint8_t)0x06)
+#define I2C_OA2_MASK07                  ((uint8_t)0x07)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
+  * @{
+  */
+#define I2C_GENERALCALL_DISABLE         ((uint32_t)0x00000000)
+#define I2C_GENERALCALL_ENABLE          I2C_CR1_GCEN
+/**
+  * @}
+  */
+
+/** @defgroup I2C_nostretch_mode I2C nostretch mode
+  * @{
+  */
+#define I2C_NOSTRETCH_DISABLE           ((uint32_t)0x00000000)
+#define I2C_NOSTRETCH_ENABLE            I2C_CR1_NOSTRETCH
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
+  * @{
+  */
+#define I2C_MEMADD_SIZE_8BIT            ((uint32_t)0x00000001)
+#define I2C_MEMADD_SIZE_16BIT           ((uint32_t)0x00000002)
+/**
+  * @}
+  */  
+  
+/** @defgroup I2C_ReloadEndMode_definition I2C ReloadEndMode definition
+  * @{
+  */
+#define  I2C_RELOAD_MODE                I2C_CR2_RELOAD
+#define  I2C_AUTOEND_MODE               I2C_CR2_AUTOEND
+#define  I2C_SOFTEND_MODE               ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_StartStopMode_definition I2C StartStopMode definition
+  * @{
+  */
+#define  I2C_NO_STARTSTOP               ((uint32_t)0x00000000)
+#define  I2C_GENERATE_STOP              I2C_CR2_STOP
+#define  I2C_GENERATE_START_READ        (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
+#define  I2C_GENERATE_START_WRITE       I2C_CR2_START
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+  * @brief I2C Interrupt definition
+  *        Elements values convention: 0xXXXXXXXX
+  *           - XXXXXXXX  : Interrupt control mask
+  * @{
+  */
+#define I2C_IT_ERRI                     I2C_CR1_ERRIE
+#define I2C_IT_TCI                      I2C_CR1_TCIE
+#define I2C_IT_STOPI                    I2C_CR1_STOPIE
+#define I2C_IT_NACKI                    I2C_CR1_NACKIE
+#define I2C_IT_ADDRI                    I2C_CR1_ADDRIE
+#define I2C_IT_RXI                      I2C_CR1_RXIE
+#define I2C_IT_TXI                      I2C_CR1_TXIE
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+  * @{
+  */ 
+#define I2C_FLAG_TXE                    I2C_ISR_TXE
+#define I2C_FLAG_TXIS                   I2C_ISR_TXIS
+#define I2C_FLAG_RXNE                   I2C_ISR_RXNE
+#define I2C_FLAG_ADDR                   I2C_ISR_ADDR
+#define I2C_FLAG_AF                     I2C_ISR_NACKF
+#define I2C_FLAG_STOPF                  I2C_ISR_STOPF
+#define I2C_FLAG_TC                     I2C_ISR_TC
+#define I2C_FLAG_TCR                    I2C_ISR_TCR
+#define I2C_FLAG_BERR                   I2C_ISR_BERR
+#define I2C_FLAG_ARLO                   I2C_ISR_ARLO
+#define I2C_FLAG_OVR                    I2C_ISR_OVR
+#define I2C_FLAG_PECERR                 I2C_ISR_PECERR
+#define I2C_FLAG_TIMEOUT                I2C_ISR_TIMEOUT
+#define I2C_FLAG_ALERT                  I2C_ISR_ALERT
+#define I2C_FLAG_BUSY                   I2C_ISR_BUSY
+#define I2C_FLAG_DIR                    I2C_ISR_DIR
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+  
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+  * @{
+  */
+
+/** @brief Reset I2C handle state
+  * @param  __HANDLE__: specifies the I2C Handle.
+  * @retval None
+  */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief  Enable the specified I2C interrupts.
+  * @param  __HANDLE__: specifies the I2C Handle.
+  * @param  __INTERRUPT__: specifies the interrupt source to enable.
+  *        This parameter can be one of the following values:
+  *            @arg I2C_IT_ERRI: Errors interrupt enable
+  *            @arg I2C_IT_TCI: Transfer complete interrupt enable
+  *            @arg I2C_IT_STOPI: STOP detection interrupt enable
+  *            @arg I2C_IT_NACKI: NACK received interrupt enable
+  *            @arg I2C_IT_ADDRI: Address match interrupt enable
+  *            @arg I2C_IT_RXI: RX interrupt enable
+  *            @arg I2C_IT_TXI: TX interrupt enable
+  *   
+  * @retval None
+  */
+  
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+
+/** @brief  Disable the specified I2C interrupts.
+  * @param  __HANDLE__: specifies the I2C Handle.
+  * @param  __INTERRUPT__: specifies the interrupt source to disable.
+  *        This parameter can be one of the following values:
+  *            @arg I2C_IT_ERRI: Errors interrupt enable
+  *            @arg I2C_IT_TCI: Transfer complete interrupt enable
+  *            @arg I2C_IT_STOPI: STOP detection interrupt enable
+  *            @arg I2C_IT_NACKI: NACK received interrupt enable
+  *            @arg I2C_IT_ADDRI: Address match interrupt enable
+  *            @arg I2C_IT_RXI: RX interrupt enable
+  *            @arg I2C_IT_TXI: TX interrupt enable
+  *   
+  * @retval None
+  */
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+ 
+/** @brief  Checks if the specified I2C interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the I2C Handle.
+  * @param  __INTERRUPT__: specifies the I2C interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg I2C_IT_ERRI: Errors interrupt enable
+  *            @arg I2C_IT_TCI: Transfer complete interrupt enable
+  *            @arg I2C_IT_STOPI: STOP detection interrupt enable
+  *            @arg I2C_IT_NACKI: NACK received interrupt enable
+  *            @arg I2C_IT_ADDRI: Address match interrupt enable
+  *            @arg I2C_IT_RXI: RX interrupt enable
+  *            @arg I2C_IT_TXI: TX interrupt enable
+  *   
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks whether the specified I2C flag is set or not.
+  * @param  __HANDLE__: specifies the I2C Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg I2C_FLAG_TXE:      Transmit data register empty
+  *            @arg I2C_FLAG_TXIS:     Transmit interrupt status
+  *            @arg I2C_FLAG_RXNE:     Receive data register not empty
+  *            @arg I2C_FLAG_ADDR:     Address matched (slave mode)
+  *            @arg I2C_FLAG_AF:       Acknowledge failure received flag
+  *            @arg I2C_FLAG_STOPF:    STOP detection flag
+  *            @arg I2C_FLAG_TC:       Transfer complete (master mode)
+  *            @arg I2C_FLAG_TCR:      Transfer complete reload
+  *            @arg I2C_FLAG_BERR:     Bus error
+  *            @arg I2C_FLAG_ARLO:     Arbitration lost
+  *            @arg I2C_FLAG_OVR:      Overrun/Underrun
+  *            @arg I2C_FLAG_PECERR:   PEC error in reception
+  *            @arg I2C_FLAG_TIMEOUT:  Timeout or Tlow detection flag 
+  *            @arg I2C_FLAG_ALERT:    SMBus alert
+  *            @arg I2C_FLAG_BUSY:     Bus busy
+  *            @arg I2C_FLAG_DIR:      Transfer direction (slave mode)
+  *
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define I2C_FLAG_MASK  ((uint32_t)0x0001FFFF)
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)))
+
+/** @brief  Clears the I2C pending flags which are cleared by writing 1 in a specific bit.
+  * @param  __HANDLE__: specifies the I2C Handle.
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg I2C_FLAG_ADDR:    Address matched (slave mode)
+  *            @arg I2C_FLAG_AF:      Acknowledge failure received flag
+  *            @arg I2C_FLAG_STOPF:   STOP detection flag
+  *            @arg I2C_FLAG_BERR:    Bus error
+  *            @arg I2C_FLAG_ARLO:    Arbitration lost
+  *            @arg I2C_FLAG_OVR:     Overrun/Underrun            
+  *            @arg I2C_FLAG_PECERR:  PEC error in reception
+  *            @arg I2C_FLAG_TIMEOUT: Timeout or Tlow detection flag 
+  *            @arg I2C_FLAG_ALERT:   SMBus alert
+  *   
+  * @retval None
+  */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = ((__FLAG__) & I2C_FLAG_MASK))
+ 
+/** @brief  Enable the specified I2C peripheral.
+  * @param  __HANDLE__: specifies the I2C Handle. 
+  * @retval None
+  */
+#define __HAL_I2C_ENABLE(__HANDLE__)                            (SET_BIT((__HANDLE__)->Instance->CR1,  I2C_CR1_PE))
+
+/** @brief  Disable the specified I2C peripheral.
+  * @param  __HANDLE__: specifies the I2C Handle. 
+  * @retval None
+  */
+#define __HAL_I2C_DISABLE(__HANDLE__)                           (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
+
+/**
+  * @}
+  */ 
+
+/* Include I2C HAL Extension module */
+#include "stm32f7xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+/* Initialization and de-initialization functions******************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+/**
+  * @}
+  */ 
+
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+/* IO operation functions  ****************************************************/
+ /******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+ /******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+ /******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+/**
+  * @}
+  */ 
+
+/** @addtogroup IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */   
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+/**
+  * @}
+  */ 
+
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State and Errors functions
+  * @{
+  */
+/* Peripheral State and Errors functions  *************************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+uint32_t             HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macro I2C Private Macros
+  * @{
+  */
+
+#define IS_I2C_ADDRESSING_MODE(MODE)    (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
+                                          ((MODE) == I2C_ADDRESSINGMODE_10BIT))
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS)    (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+                                          ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+
+#define IS_I2C_OWN_ADDRESS2_MASK(MASK)  (((MASK) == I2C_OA2_NOMASK)  || \
+                                          ((MASK) == I2C_OA2_MASK01) || \
+                                          ((MASK) == I2C_OA2_MASK02) || \
+                                          ((MASK) == I2C_OA2_MASK03) || \
+                                          ((MASK) == I2C_OA2_MASK04) || \
+                                          ((MASK) == I2C_OA2_MASK05) || \
+                                          ((MASK) == I2C_OA2_MASK06) || \
+                                          ((MASK) == I2C_OA2_MASK07))  
+
+#define IS_I2C_GENERAL_CALL(CALL)       (((CALL) == I2C_GENERALCALL_DISABLE) || \
+                                          ((CALL) == I2C_GENERALCALL_ENABLE))
+
+#define IS_I2C_NO_STRETCH(STRETCH)      (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+                                          ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+
+#define IS_I2C_MEMADD_SIZE(SIZE)        (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+                                          ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+                              
+
+#define IS_TRANSFER_MODE(MODE)          (((MODE) == I2C_RELOAD_MODE)   || \
+                                          ((MODE) == I2C_AUTOEND_MODE) || \
+                                          ((MODE) == I2C_SOFTEND_MODE))
+
+#define IS_TRANSFER_REQUEST(REQUEST)    (((REQUEST) == I2C_GENERATE_STOP)         || \
+                                          ((REQUEST) == I2C_GENERATE_START_READ)  || \
+                                          ((REQUEST) == I2C_GENERATE_START_WRITE) || \
+                                          ((REQUEST) == I2C_NO_STARTSTOP))
+                               
+
+#define I2C_RESET_CR2(__HANDLE__)       ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1)   ((ADDRESS1) <= (uint32_t)0x000003FF)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2)   ((ADDRESS2) <= (uint16_t)0x00FF)
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__)    ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__)    ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+
+#define I2C_GENERATE_START(__ADDMODE__,__ADDRESS__)   (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+                                                          (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+/**
+  * @}
+  */ 
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+  * @{
+  */
+/* Private functions are defined in stm32f7xx_hal_i2c.c file */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_i2c_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,210 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_i2c_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   I2C Extended HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of I2C Extended peripheral:
+  *           + Extended features functions
+  *         
+  @verbatim
+  ==============================================================================
+               ##### I2C peripheral Extended features  #####
+  ==============================================================================
+           
+  [..] Comparing to other previous devices, the I2C interface for STM32L4XX
+       devices contains the following additional features
+       
+       (+) Possibility to disable or enable Analog Noise Filter
+       (+) Use of a configured Digital Noise Filter
+       (+) Disable or enable wakeup from Stop mode
+   
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..] This driver provides functions to:
+    (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()
+    (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup I2CEx I2C Extended HAL module driver
+  * @brief I2C Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions
+  * @{
+  */
+
+/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions
+  * @brief    Extended features functions
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Extended features functions #####
+ ===============================================================================  
+    [..] This section provides functions allowing to:
+      (+) Configure Noise Filters
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Configures I2C Analog noise filter. 
+  * @param  hi2c : pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2Cx peripheral.
+  * @param  AnalogFilter : new state of the Analog filter.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
+  
+  if((hi2c->State == HAL_I2C_STATE_BUSY) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_RX)
+     || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_RX))
+  {
+    return HAL_BUSY;
+  }
+  
+  /* Process Locked */
+  __HAL_LOCK(hi2c);
+
+  hi2c->State = HAL_I2C_STATE_BUSY;
+  
+  /* Disable the selected I2C peripheral */
+  __HAL_I2C_DISABLE(hi2c);    
+  
+  /* Reset I2Cx ANOFF bit */
+  hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);    
+  
+  /* Set analog filter bit*/
+  hi2c->Instance->CR1 |= AnalogFilter;
+  
+  __HAL_I2C_ENABLE(hi2c); 
+  
+  hi2c->State = HAL_I2C_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2c);
+
+  return HAL_OK; 
+}
+
+/**
+  * @brief  Configures I2C Digital noise filter. 
+  * @param  hi2c : pointer to a I2C_HandleTypeDef structure that contains
+  *                the configuration information for the specified I2Cx peripheral.
+  * @param  DigitalFilter : Coefficient of digital noise filter between 0x00 and 0x0F.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
+  assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
+  
+  if((hi2c->State == HAL_I2C_STATE_BUSY) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_MASTER_BUSY_RX)
+     || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_TX) || (hi2c->State == HAL_I2C_STATE_SLAVE_BUSY_RX))
+  {
+    return HAL_BUSY;
+  }
+  
+  /* Process Locked */
+  __HAL_LOCK(hi2c);
+
+  hi2c->State = HAL_I2C_STATE_BUSY;
+  
+  /* Disable the selected I2C peripheral */
+  __HAL_I2C_DISABLE(hi2c);  
+  
+  /* Get the old register value */
+  tmpreg = hi2c->Instance->CR1;
+  
+  /* Reset I2Cx DNF bits [11:8] */
+  tmpreg &= ~(I2C_CR1_DNF);
+  
+  /* Set I2Cx DNF coefficient */
+  tmpreg |= DigitalFilter << 8;
+  
+  /* Store the new register value */
+  hi2c->Instance->CR1 = tmpreg;
+  
+  __HAL_I2C_ENABLE(hi2c); 
+  
+  hi2c->State = HAL_I2C_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2c);
+
+  return HAL_OK; 
+}
+
+/**
+  * @}
+  */  
+
+/**
+  * @}
+  */  
+
+#endif /* HAL_I2C_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_i2c_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,129 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_i2c_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of I2C HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_I2C_EX_H
+#define __STM32F7xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"  
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2CEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants I2CEx Exported Constants
+  * @{
+  */
+
+/** @defgroup I2CEx_Analog_Filter I2CEx Analog Filter
+  * @{
+  */
+#define I2C_ANALOGFILTER_ENABLE        ((uint32_t)0x00000000)
+#define I2C_ANALOGFILTER_DISABLE       I2C_CR1_ANFOFF
+/**
+  * @}
+  */
+
+ 
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* Peripheral Control methods  ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macro I2C Private Macros
+  * @{
+  */
+#define IS_I2C_ANALOG_FILTER(FILTER)    (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
+                                          ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+
+#define IS_I2C_DIGITAL_FILTER(FILTER)   ((FILTER) <= 0x0000000F)
+/**
+  * @}
+  */ 
+
+/* Private Functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+  * @{
+  */
+/* Private functions are defined in stm32f7xx_hal_i2c_ex.c file */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_I2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_i2s.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1556 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_i2s.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   I2S HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Integrated Interchip Sound (I2S) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State and Errors functions
+  @verbatim
+ ===============================================================================
+                  ##### How to use this driver #####
+ ===============================================================================
+ [..]
+    The I2S HAL driver can be used as follows:
+    
+    (#) Declare a I2S_HandleTypeDef handle structure.
+    (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API:
+        (##) Enable the SPIx interface clock.                      
+        (##) I2S pins configuration:
+            (+++) Enable the clock for the I2S GPIOs.
+            (+++) Configure these I2S pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT()
+             and HAL_I2S_Receive_IT() APIs).
+            (+++) Configure the I2Sx interrupt priority.
+            (+++) Enable the NVIC I2S IRQ handle.
+        (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA()
+             and HAL_I2S_Receive_DMA() APIs:
+            (+++) Declare a DMA handle structure for the Tx/Rx channel.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.                
+            (+++) Configure the DMA Tx/Rx Channel.
+            (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the 
+                DMA Tx/Rx Channel.
+  
+   (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity
+       using HAL_I2S_Init() function.
+
+   -@- The specific I2S interrupts (Transmission complete interrupt, 
+       RXNE interrupt and Error Interrupts) will be managed using the macros
+       __HAL_I2S_ENABLE_IT() and __HAL_I2S_DISABLE_IT() inside the transmit and receive process.
+   -@- Make sure that either:
+       (+@) I2S clock is configured based on SYSCLK or 
+       (+@) External clock source is configured after setting correctly 
+            the define constant EXTERNAL_CLOCK_VALUE in the stm32f3xx_hal_conf.h file. 
+
+   (#) Three mode of operations are available within this driver :     
+  
+   *** Polling mode IO operation ***
+   =================================
+   [..]    
+     (+) Send an amount of data in blocking mode using HAL_I2S_Transmit() 
+     (+) Receive an amount of data in blocking mode using HAL_I2S_Receive()
+   
+   *** Interrupt mode IO operation ***    
+   ===================================
+   [..]    
+     (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT() 
+     (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback 
+     (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+     (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT() 
+     (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback 
+     (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_I2S_RxCpltCallback                                      
+     (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can 
+         add his own code by customization of function pointer HAL_I2S_ErrorCallback
+
+   *** DMA mode IO operation ***    
+   ==============================
+   [..] 
+     (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA() 
+     (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback 
+     (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_I2S_TxCpltCallback
+     (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA() 
+     (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback 
+     (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_I2S_RxCpltCallback                                     
+     (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can 
+         add his own code by customization of function pointer HAL_I2S_ErrorCallback
+     (+) Pause the DMA Transfer using HAL_I2S_DMAPause()      
+     (+) Resume the DMA Transfer using HAL_I2S_DMAResume()  
+     (+) Stop the DMA Transfer using HAL_I2S_DMAStop()      
+   
+   *** I2S HAL driver macros list ***
+   ============================================= 
+   [..]
+     Below the list of most used macros in I2S HAL driver.
+       
+      (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode) 
+      (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode)    
+      (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts
+      (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts
+      (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not
+      
+    [..]  
+      (@) You can refer to the I2S HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup I2S I2S
+  * @brief I2S HAL module driver
+  * @{
+  */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup I2S_Private_Functions I2S Private Functions
+  * @{
+  */
+static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma);
+static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void I2S_DMAError(DMA_HandleTypeDef *hdma);
+static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s);
+static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s);
+static uint32_t I2S_GetClockFreq(I2S_HandleTypeDef *hi2s);
+static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t State, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup I2S_Exported_Functions I2S Exported Functions
+  * @{
+  */
+
+/** @defgroup  I2S_Exported_Functions_Group1 Initialization and de-initialization functions 
+  *  @brief    Initialization and Configuration functions 
+  *
+@verbatim    
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and 
+          de-initialize the I2Sx peripheral in simplex mode:
+
+      (+) User must Implement HAL_I2S_MspInit() function in which he configures 
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+      (+) Call the function HAL_I2S_Init() to configure the selected device with 
+          the selected configuration:
+        (++) Mode
+        (++) Standard 
+        (++) Data Format
+        (++) MCLK Output
+        (++) Audio frequency
+        (++) Polarity
+        (++) Full duplex mode
+
+      (+) Call the function HAL_I2S_DeInit() to restore the default configuration 
+          of the selected I2Sx peripheral. 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Initializes the I2S according to the specified parameters 
+  *         in the I2S_InitTypeDef and create the associated handle.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s)
+{
+  uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1;
+  uint32_t tmp = 0, i2sclk = 0;
+ 
+  /* Check the I2S handle allocation */
+  if(hi2s == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance));
+  assert_param(IS_I2S_MODE(hi2s->Init.Mode));
+  assert_param(IS_I2S_STANDARD(hi2s->Init.Standard));
+  assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat));
+  assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput));
+  assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq));
+  assert_param(IS_I2S_CPOL(hi2s->Init.CPOL));  
+  assert_param(IS_I2S_CLOCKSOURCE(hi2s->Init.ClockSource));
+  
+  if(hi2s->State == HAL_I2S_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hi2s->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+    HAL_I2S_MspInit(hi2s);
+  }
+  
+  hi2s->State = HAL_I2S_STATE_BUSY;
+    
+  /*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/
+  /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+  hi2s->Instance->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
+                               SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
+                               SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD); 
+  hi2s->Instance->I2SPR = 0x0002;
+  
+  /* Get the I2SCFGR register value */
+  tmpreg = hi2s->Instance->I2SCFGR;
+  
+  /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/
+  if(hi2s->Init.AudioFreq == I2S_AUDIOFREQ_DEFAULT)
+  {
+    i2sodd = (uint16_t)0;
+    i2sdiv = (uint16_t)2;   
+  }
+  /* If the requested audio frequency is not the default, compute the prescaler */
+  else
+  {
+    /* Check the frame length (For the Prescaler computing) *******************/
+    if(hi2s->Init.DataFormat == I2S_DATAFORMAT_16B)
+    {
+      /* Packet length is 16 bits */
+      packetlength = 1;
+    }
+    else
+    {
+      /* Packet length is 32 bits */
+      packetlength = 2;
+    }
+    
+    /* Get I2S source Clock frequency  ****************************************/
+
+    /* If an external I2S clock has to be used, the specific define should be set  
+    in the project configuration or in the stm32f3xx_conf.h file */
+    if(hi2s->Init.ClockSource == I2S_CLOCK_EXTERNAL)
+    {    
+      /* Set the I2S clock to the external clock  value */
+      i2sclk = EXTERNAL_CLOCK_VALUE;
+    }
+    else
+    {
+      /* Get the I2S source clock value */
+			i2sclk = I2S_GetClockFreq(hi2s);
+    }
+    
+    /* Compute the Real divider depending on the MCLK output state, with a floating point */
+    if(hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE)
+    {
+      /* MCLK output is enabled */
+      tmp = (uint16_t)(((((i2sclk / 256) * 10) / hi2s->Init.AudioFreq)) + 5);
+    }
+    else
+    {
+      /* MCLK output is disabled */
+      tmp = (uint16_t)(((((i2sclk / (32 * packetlength)) *10 ) / hi2s->Init.AudioFreq)) + 5);
+    }
+    
+    /* Remove the flatting point */
+    tmp = tmp / 10;  
+    
+    /* Check the parity of the divider */
+    i2sodd = (uint16_t)(tmp & (uint16_t)0x0001);
+    
+    /* Compute the i2sdiv prescaler */
+    i2sdiv = (uint16_t)((tmp - i2sodd) / 2);
+    
+    /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+    i2sodd = (uint16_t) (i2sodd << 8);
+  }
+  
+  /* Test if the divider is 1 or 0 or greater than 0xFF */
+  if((i2sdiv < 2) || (i2sdiv > 0xFF))
+  {
+    /* Set the default values */
+    i2sdiv = 2;
+    i2sodd = 0;
+  }
+  
+  /* Write to SPIx I2SPR register the computed value */
+  hi2s->Instance->I2SPR = (uint16_t)((uint16_t)i2sdiv | (uint16_t)(i2sodd | (uint16_t)hi2s->Init.MCLKOutput));
+  
+  /* Configure the I2S with the I2S_InitStruct values */
+  tmpreg |= (uint16_t)((uint16_t)SPI_I2SCFGR_I2SMOD | (uint16_t)(hi2s->Init.Mode | \
+                       (uint16_t)(hi2s->Init.Standard | (uint16_t)(hi2s->Init.DataFormat | \
+                       (uint16_t)hi2s->Init.CPOL))));
+  
+  /* Write to SPIx I2SCFGR */  
+  hi2s->Instance->I2SCFGR = tmpreg;
+  
+  hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+  hi2s->State= HAL_I2S_STATE_READY;
+  
+  return HAL_OK;
+}
+           
+/**
+  * @brief DeInitializes the I2S peripheral 
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s)
+{
+  /* Check the I2S handle allocation */
+  if(hi2s == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance));
+
+  hi2s->State = HAL_I2S_STATE_BUSY;
+  
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+  HAL_I2S_MspDeInit(hi2s);
+  
+  hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+  hi2s->State = HAL_I2S_STATE_RESET;
+  
+  /* Release Lock */
+  __HAL_UNLOCK(hi2s);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief I2S MSP Init
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2s);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief I2S MSP DeInit
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2s);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Exported_Functions_Group2 Input and Output operation functions 
+  *  @brief Data transfers functions 
+  *
+@verbatim   
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to manage the I2S data 
+    transfers.
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode : The communication is performed in the polling mode. 
+            The status of all data processing is returned by the same function 
+            after finishing transfer.  
+       (++) No-Blocking mode : The communication is performed using Interrupts 
+            or DMA. These functions return the status of the transfer startup.
+            The end of the data processing will be indicated through the 
+            dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when 
+            using DMA mode.
+
+    (#) Blocking mode functions are :
+        (++) HAL_I2S_Transmit()
+        (++) HAL_I2S_Receive()
+        
+    (#) No-Blocking mode functions with Interrupt are :
+        (++) HAL_I2S_Transmit_IT()
+        (++) HAL_I2S_Receive_IT()
+
+    (#) No-Blocking mode functions with DMA are :
+        (++) HAL_I2S_Transmit_DMA()
+        (++) HAL_I2S_Receive_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_I2S_TxCpltCallback()
+        (++) HAL_I2S_RxCpltCallback()
+        (++) HAL_I2S_ErrorCallback()
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Transmit an amount of data in blocking mode
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length 
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected 
+  *       the Size parameter means the number of 16-bit data length. 
+  * @param  Timeout: Timeout duration
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization 
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  if((pData == NULL ) || (Size == 0)) 
+  {
+    return  HAL_ERROR;                                    
+  }
+  
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  { 
+    if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\
+       ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B))
+    {
+      hi2s->TxXferSize = (Size << 1);
+      hi2s->TxXferCount = (Size << 1);
+    }
+    else
+    {
+      hi2s->TxXferSize = Size;
+      hi2s->TxXferCount = Size;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+    
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+    hi2s->State = HAL_I2S_STATE_BUSY_TX;
+   
+    /* Check if the I2S is already enabled */ 
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */    
+      __HAL_I2S_ENABLE(hi2s);
+    }
+    
+    while(hi2s->TxXferCount > 0)
+    {
+      hi2s->Instance->DR = (*pData++);
+      hi2s->TxXferCount--;   
+      /* Wait until TXE flag is set */
+      if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, SET, Timeout) != HAL_OK)
+      {
+        /* Set the error code and execute error callback*/
+        hi2s->ErrorCode |= HAL_I2S_ERROR_TIMEOUT;
+        HAL_I2S_ErrorCallback(hi2s);
+        return HAL_TIMEOUT;
+      }
+
+      /* Check if an underrun occurs */
+      if(__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR) == SET) 
+      {
+        /* Set the I2S State ready */
+        hi2s->State = HAL_I2S_STATE_READY; 
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2s);
+
+        /* Set the error code and execute error callback*/
+        hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+        HAL_I2S_ErrorCallback(hi2s);
+
+        return HAL_ERROR;
+      }
+    }      
+    
+    /* Check if Slave mode is selected */
+    if(((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) || ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX))
+    {
+      /* Wait until Busy flag is reset */
+      if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, SET, Timeout) != HAL_OK) 
+      {
+        /* Set the error code and execute error callback*/
+        hi2s->ErrorCode |= HAL_I2S_ERROR_TIMEOUT;
+        HAL_I2S_ErrorCallback(hi2s);
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    hi2s->State = HAL_I2S_STATE_READY; 
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in blocking mode 
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length 
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected 
+  *       the Size parameter means the number of 16-bit data length. 
+  * @param Timeout: Timeout duration
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization 
+  *       between Master and Slave(example: audio streaming).
+  * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate
+  *       in continuous way and as the I2S is not disabled at the end of the I2S transaction.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  if((pData == NULL ) || (Size == 0)) 
+  {
+    return  HAL_ERROR;                                    
+  }
+  
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  { 
+    if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\
+       ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B))
+    {
+      hi2s->RxXferSize = (Size << 1);
+      hi2s->RxXferCount = (Size << 1);
+    }
+    else
+    {
+      hi2s->RxXferSize = Size;
+      hi2s->RxXferCount = Size;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+    
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+    hi2s->State = HAL_I2S_STATE_BUSY_RX;
+        
+    /* Check if the I2S is already enabled */ 
+    if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */    
+      __HAL_I2S_ENABLE(hi2s);
+    }
+    
+    /* Check if Master Receiver mode is selected */
+    if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+    {
+      /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
+      access to the SPI_SR register. */ 
+      __HAL_I2S_CLEAR_OVRFLAG(hi2s);        
+    }
+    
+    /* Receive data */
+    while(hi2s->RxXferCount > 0)
+    {
+      /* Wait until RXNE flag is set */
+      if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, SET, Timeout) != HAL_OK) 
+      {
+        /* Set the error code and execute error callback*/
+        hi2s->ErrorCode |= HAL_I2S_ERROR_TIMEOUT;
+        HAL_I2S_ErrorCallback(hi2s);
+        return HAL_TIMEOUT;
+      }
+      
+      /* Check if an overrun occurs */
+      if(__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR) == SET) 
+      {
+        /* Set the I2S State ready */
+        hi2s->State = HAL_I2S_STATE_READY; 
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hi2s);
+
+        /* Set the error code and execute error callback*/
+        hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+        HAL_I2S_ErrorCallback(hi2s);
+
+        return HAL_ERROR;
+      }
+
+      (*pData++) = hi2s->Instance->DR;
+      hi2s->RxXferCount--;
+    }      
+
+    hi2s->State = HAL_I2S_STATE_READY; 
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Transmit an amount of data in non-blocking mode with Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length 
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected 
+  *       the Size parameter means the number of 16-bit data length. 
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization 
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    hi2s->pTxBuffPtr = pData;
+    if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\
+      ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B))
+    {
+      hi2s->TxXferSize = (Size << 1);
+      hi2s->TxXferCount = (Size << 1);
+    }  
+    else
+    {
+      hi2s->TxXferSize = Size;
+      hi2s->TxXferCount = Size;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+    
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+    hi2s->State = HAL_I2S_STATE_BUSY_TX;
+
+    /* Enable TXE and ERR interrupt */
+    __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+    
+    /* Check if the I2S is already enabled */ 
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */    
+      __HAL_I2S_ENABLE(hi2s);
+    }
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in non-blocking mode with Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length 
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected 
+  *       the Size parameter means the number of 16-bit data length. 
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization 
+  *       between Master and Slave(example: audio streaming).
+  * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronisation 
+  * between Master and Slave otherwise the I2S interrupt should be optimized. 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    hi2s->pRxBuffPtr = pData;
+    if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\
+      ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B))
+    {
+      hi2s->RxXferSize = (Size << 1);
+      hi2s->RxXferCount = (Size << 1);
+    }  
+    else
+    {
+      hi2s->RxXferSize = Size;
+      hi2s->RxXferCount = Size;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+    
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+    hi2s->State = HAL_I2S_STATE_BUSY_RX;
+
+    /* Enable TXE and ERR interrupt */
+    __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+    
+    /* Check if the I2S is already enabled */ 
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */    
+      __HAL_I2S_ENABLE(hi2s);
+    }
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  } 
+}
+
+/**
+  * @brief Transmit an amount of data in non-blocking mode with DMA
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to the Transmit data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length 
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected 
+  *       the Size parameter means the number of 16-bit data length. 
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization 
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  
+  if((pData == NULL) || (Size == 0)) 
+  {
+    return  HAL_ERROR;                                    
+  }
+  
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {  
+    hi2s->pTxBuffPtr = pData;
+    if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\
+      ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B))
+    {
+      hi2s->TxXferSize = (Size << 1);
+      hi2s->TxXferCount = (Size << 1);
+    }  
+    else
+    {
+      hi2s->TxXferSize = Size;
+      hi2s->TxXferCount = Size;
+    }  
+    
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+    
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+    hi2s->State = HAL_I2S_STATE_BUSY_TX;
+
+    /* Set the I2S Tx DMA Half transfer complete callback */
+    hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt;
+
+    /* Set the I2S TxDMA transfer complete callback */
+    hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt;
+    
+    /* Set the DMA error callback */
+    hi2s->hdmatx->XferErrorCallback = I2S_DMAError;
+    
+    /* Enable the Tx DMA Channel */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize);
+    
+    /* Check if the I2S is already enabled */ 
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */    
+      __HAL_I2S_ENABLE(hi2s);
+    }
+    
+    /* Enable Tx DMA Request */  
+    hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in non-blocking mode with DMA 
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param pData: a 16-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be sent:
+  * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
+  *       configuration phase, the Size parameter means the number of 16-bit data length 
+  *       in the transaction and when a 24-bit data frame or a 32-bit data frame is selected 
+  *       the Size parameter means the number of 16-bit data length. 
+  * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization 
+  *       between Master and Slave(example: audio streaming).
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  
+  if((pData == NULL) || (Size == 0)) 
+  {
+    return  HAL_ERROR;                                    
+  } 
+    
+  if(hi2s->State == HAL_I2S_STATE_READY)
+  {    
+    hi2s->pRxBuffPtr = pData;
+    if(((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_24B)||\
+      ((hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN)) == I2S_DATAFORMAT_32B))
+    {
+      hi2s->RxXferSize = (Size << 1);
+      hi2s->RxXferCount = (Size << 1);
+    }  
+    else
+    {
+      hi2s->RxXferSize = Size;
+      hi2s->RxXferCount = Size;
+    }
+    /* Process Locked */
+    __HAL_LOCK(hi2s);
+    
+    hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
+    hi2s->State = HAL_I2S_STATE_BUSY_RX;
+   
+    /* Set the I2S Rx DMA Half transfer complete callback */
+    hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt;
+
+    /* Set the I2S Rx DMA transfer complete callback */
+    hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt;
+    
+    /* Set the DMA error callback */
+    hi2s->hdmarx->XferErrorCallback = I2S_DMAError;
+    
+    /* Check if Master Receiver mode is selected */
+    if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
+    {
+      /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read
+      access to the SPI_SR register. */ 
+      __HAL_I2S_CLEAR_OVRFLAG(hi2s);        
+    }
+    
+    /* Enable the Rx DMA Channel */
+    tmp = (uint32_t*)&pData;        
+    HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
+    
+    /* Check if the I2S is already enabled */ 
+    if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
+    {
+      /* Enable I2S peripheral */    
+      __HAL_I2S_ENABLE(hi2s);
+    }
+    
+    /* Enable Rx DMA Request */  
+    hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hi2s);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Pauses the audio stream playing from the Media.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s)
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2s);
+
+  if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+  {
+    /* Disable the I2S DMA Tx request */
+    hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+  {
+    /* Disable the I2S DMA Rx request */
+    hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+  {
+    if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
+    {
+      /* Disable the I2S DMA Tx request */
+      hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+    }
+    else
+    {
+      /* Disable the I2S DMA Rx request */
+      hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+    }
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2s);
+  
+  return HAL_OK; 
+}
+
+/**
+  * @brief Resumes the audio stream playing from the Media.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s)
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2s);
+  
+  if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+  {
+    /* Enable the I2S DMA Tx request */
+    SET_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN);
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+  {
+    /* Enable the I2S DMA Rx request */
+    SET_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN);
+  }
+  
+  /* If the I2S peripheral is still not enabled, enable it */
+  if(HAL_IS_BIT_CLR(hi2s->Instance->I2SCFGR, SPI_I2SCFGR_I2SE))
+  {
+    /* Enable I2S peripheral */    
+    __HAL_I2S_ENABLE(hi2s);
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2s);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief Stops the audio stream playing from the Media.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s)
+{
+  /* Process Locked */
+  __HAL_LOCK(hi2s);
+  
+  /* Disable the I2S Tx/Rx DMA requests */
+  CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_TXDMAEN);
+  CLEAR_BIT(hi2s->Instance->CR2, SPI_CR2_RXDMAEN);
+  
+  /* Abort the I2S DMA Channel tx */
+  if(hi2s->hdmatx != NULL)
+  {
+    /* Disable the I2S DMA channel */
+    __HAL_DMA_DISABLE(hi2s->hdmatx);
+    HAL_DMA_Abort(hi2s->hdmatx);
+  }
+  /* Abort the I2S DMA Channel rx */
+  if(hi2s->hdmarx != NULL)
+  {
+    /* Disable the I2S DMA channel */
+    __HAL_DMA_DISABLE(hi2s->hdmarx);
+    HAL_DMA_Abort(hi2s->hdmarx);
+  }
+
+  /* Disable I2S peripheral */
+  __HAL_I2S_DISABLE(hi2s);
+  
+  hi2s->State = HAL_I2S_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hi2s);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles I2S interrupt request.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL status
+  */
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s)
+{  
+  __IO uint32_t i2ssr = hi2s->Instance->SR;
+
+  if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
+  {  
+    /* I2S in mode Receiver ----------------------------------------------------*/
+    if(((i2ssr & I2S_FLAG_RXNE) == I2S_FLAG_RXNE) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE) != RESET))
+    {
+      I2S_Receive_IT(hi2s);
+    }
+
+    /* I2S Overrun error interrupt occurred -------------------------------------*/
+    if(((i2ssr & I2S_FLAG_OVR) == I2S_FLAG_OVR) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR) != RESET))
+    {
+      /* Disable RXNE and ERR interrupt */
+      __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+
+      /* Set the I2S State ready */
+      hi2s->State = HAL_I2S_STATE_READY; 
+
+      /* Set the error code and execute error callback*/
+      hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
+      HAL_I2S_ErrorCallback(hi2s);
+    }  
+  }
+  else if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
+  {  
+    /* I2S in mode Transmitter ---------------------------------------------------*/
+    if(((i2ssr & I2S_FLAG_TXE) == I2S_FLAG_TXE) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE) != RESET))
+    {     
+      I2S_Transmit_IT(hi2s);
+    } 
+    
+    /* I2S Underrun error interrupt occurred ------------------------------------*/
+    if(((i2ssr & I2S_FLAG_UDR) == I2S_FLAG_UDR) && (__HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR) != RESET))
+    {
+      /* Disable TXE and ERR interrupt */
+      __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+      /* Set the I2S State ready */
+      hi2s->State = HAL_I2S_STATE_READY; 
+
+      /* Set the error code and execute error callback*/
+      hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
+      HAL_I2S_ErrorCallback(hi2s);
+    }
+  }
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup I2S_Private_Functions I2S Private Functions
+  * @{
+  */
+/**
+  * @brief This function handles I2S Communication Timeout.
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @param Flag: Flag checked
+  * @param State: Value of the flag expected
+  * @param Timeout: Duration of the timeout
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, 
+                                                       uint32_t State, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  /* Wait until flag is set */
+  if(State == RESET)
+  {
+    while(__HAL_I2S_GET_FLAG(hi2s, Flag) == RESET)
+    {
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Set the I2S State ready */
+          hi2s->State= HAL_I2S_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2s);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_I2S_GET_FLAG(hi2s, Flag) != RESET)
+    {
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Set the I2S State ready */
+          hi2s->State= HAL_I2S_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hi2s);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;    
+}
+/**
+  * @}
+  */
+
+/** @addtogroup I2S_Exported_Functions I2S Exported Functions
+  * @{
+  */
+
+/** @addtogroup  I2S_Exported_Functions_Group2 Input and Output operation functions 
+  * @{
+  */
+/**
+  * @brief Tx Transfer Half completed callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2s);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_TxHalfCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief Tx Transfer completed callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2s);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_TxCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief Rx Transfer half completed callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2s);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer completed callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2s);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief I2S error callbacks
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+ __weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hi2s);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_I2S_ErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions 
+  *  @brief   Peripheral State functions 
+  *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral State and Errors functions #####
+ ===============================================================================  
+    [..]
+    This subsection permits to get in run-time the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the I2S state
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval HAL state
+  */
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s)
+{
+  return hi2s->State;
+}
+
+/**
+  * @brief  Return the I2S error code
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval I2S Error Code
+  */
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s)
+{
+  return hi2s->ErrorCode;
+}
+/**
+  * @}
+  */  
+
+/**
+  * @}
+  */
+
+  /**
+  * @brief  Get I2S Input Clock based on I2S source clock selection
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *               the configuration information for I2S module.   
+  * @retval I2S Clock Input 
+  */
+static uint32_t I2S_GetClockFreq(I2S_HandleTypeDef *hi2s)   
+{
+  uint32_t tmpreg = 0;
+  /* This variable used to store the VCO Input (value in Hz) */
+  uint32_t vcoinput = 0;
+  /* This variable used to store the I2S_CK_x (value in Hz) */
+  uint32_t i2sclocksource = 0;
+
+  /* Configure I2S Clock based on I2S source clock selection */ 
+  
+  /* I2S_CLK_x : I2S Block Clock configuration for different clock sources selected */
+  switch(hi2s->Init.ClockSource)
+  {
+    case I2S_CLOCK_SYSCLK :
+    {
+      /* Configure the PLLI2S division factor */
+      /* PLLI2S_VCO Input  = PLL_SOURCE/PLLI2SM */ 
+      if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+      {
+        /* In Case the PLL Source is HSI (Internal Clock) */
+        vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+      }
+      else
+      {
+        /* In Case the PLL Source is HSE (External Clock) */
+        vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+      }
+
+      /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+      /* I2S_CLK(first level) = PLLI2S_VCO Output/PLLI2SR */
+      tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28;
+      i2sclocksource = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg);
+    
+      break;
+    }
+    case I2S_CLOCK_EXTERNAL :
+    {
+      i2sclocksource = EXTERNAL_CLOCK_VALUE;
+      break;
+    }
+    default :
+    {
+      break;
+    }
+  }
+
+  /* the return result is the value of I2S clock */
+  return i2sclocksource; 
+}
+
+/** @addtogroup I2S_Private_Functions I2S Private Functions
+  * @{
+  */
+/**
+  * @brief DMA I2S transmit process complete callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void I2S_DMATxCplt(DMA_HandleTypeDef *hdma)   
+{
+  I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    hi2s->TxXferCount = 0;
+
+    /* Disable Tx DMA Request */
+    hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+    
+    if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+    {
+      if(hi2s->RxXferCount == 0)
+      {
+        hi2s->State = HAL_I2S_STATE_READY;
+      }
+    }
+    else
+    {
+      hi2s->State = HAL_I2S_STATE_READY; 
+    }
+  }
+  HAL_I2S_TxCpltCallback(hi2s);
+}
+
+/**
+  * @brief DMA I2S transmit process half complete callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_I2S_TxHalfCpltCallback(hi2s);
+}
+
+/**
+  * @brief DMA I2S receive process complete callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void I2S_DMARxCplt(DMA_HandleTypeDef *hdma)   
+{
+  I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    /* Disable Rx DMA Request */
+    hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+
+    hi2s->RxXferCount = 0;
+    if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
+    {
+      if(hi2s->TxXferCount == 0)
+      {
+        hi2s->State = HAL_I2S_STATE_READY;
+      }
+    }
+    else
+    {
+      hi2s->State = HAL_I2S_STATE_READY; 
+    }
+  }
+  HAL_I2S_RxCpltCallback(hi2s); 
+}
+      
+/**
+  * @brief DMA I2S receive process half complete callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_I2S_RxHalfCpltCallback(hi2s); 
+}
+
+/**
+  * @brief DMA I2S communication error callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void I2S_DMAError(DMA_HandleTypeDef *hdma)   
+{
+  I2S_HandleTypeDef* hi2s = ( I2S_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* Disable Rx and Tx DMA Request */
+  hi2s->Instance->CR2 &= (uint32_t)(~(SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN));
+  hi2s->TxXferCount = 0;
+  hi2s->RxXferCount = 0;
+  
+  hi2s->State= HAL_I2S_STATE_READY;
+
+  /* Set the error code and execute error callback*/
+  hi2s->ErrorCode |= HAL_I2S_ERROR_DMA;
+  HAL_I2S_ErrorCallback(hi2s);
+}
+
+/**
+  * @brief Transmit an amount of data in non-blocking mode with Interrupt
+  * @param  hi2s: pointer to a I2S_HandleTypeDef structure that contains
+  *         the configuration information for I2S module
+  * @retval None
+  */
+static void I2S_Transmit_IT(I2S_HandleTypeDef *hi2s)
+{
+  /* Transmit data */
+  hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
+  hi2s->TxXferCount--;	
+
+  if(hi2s->TxXferCount == 0)
+  {
+    /* Disable TXE and ERR interrupt */
+    __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
+
+    hi2s->State = HAL_I2S_STATE_READY;
+    HAL_I2S_TxCpltCallback(hi2s);
+  }
+}
+
+/**
+  * @brief Receive an amount of data in non-blocking mode with Interrupt
+  * @param hi2s: I2S handle
+  * @retval None
+  */
+static void I2S_Receive_IT(I2S_HandleTypeDef *hi2s)
+{
+  /* Receive data */    
+  (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
+  hi2s->RxXferCount--;
+
+  if(hi2s->RxXferCount == 0)
+  {    
+    /* Disable RXNE and ERR interrupt */
+    __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
+
+    hi2s->State = HAL_I2S_STATE_READY;     
+    HAL_I2S_RxCpltCallback(hi2s); 
+  }
+}
+/**
+  * @}
+  */
+  
+#endif /* HAL_I2S_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_i2s.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,483 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_i2s.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of I2S HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_I2S_H
+#define __STM32F7xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"  
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup I2S
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup I2S_Exported_Types I2S Exported Types
+  * @{
+  */
+
+/** 
+  * @brief I2S Init structure definition  
+  */
+typedef struct
+{
+  uint32_t Mode;                /*!< Specifies the I2S operating mode.
+                                     This parameter can be a value of @ref I2S_Mode */
+
+  uint32_t Standard;            /*!< Specifies the standard used for the I2S communication.
+                                     This parameter can be a value of @ref I2S_Standard */
+
+  uint32_t DataFormat;          /*!< Specifies the data format for the I2S communication.
+                                     This parameter can be a value of @ref I2S_Data_Format */
+
+  uint32_t MCLKOutput;          /*!< Specifies whether the I2S MCLK output is enabled or not.
+                                     This parameter can be a value of @ref I2S_MCLK_Output */
+
+  uint32_t AudioFreq;           /*!< Specifies the frequency selected for the I2S communication.
+                                     This parameter can be a value of @ref I2S_Audio_Frequency */
+
+  uint32_t CPOL;                /*!< Specifies the idle state of the I2S clock.
+                                     This parameter can be a value of @ref I2S_Clock_Polarity */
+   
+  uint32_t ClockSource;         /*!< Specifies the I2S Clock Source.
+                                     This parameter can be a value of @ref I2S_Clock_Source */
+}I2S_InitTypeDef;
+
+/** 
+  * @brief  HAL State structures definition  
+  */ 
+typedef enum
+{
+  HAL_I2S_STATE_RESET      = 0x00,  /*!< I2S not yet initialized or disabled                */
+  HAL_I2S_STATE_READY      = 0x01,  /*!< I2S initialized and ready for use                  */
+  HAL_I2S_STATE_BUSY       = 0x02,  /*!< I2S internal process is ongoing                    */   
+  HAL_I2S_STATE_BUSY_TX    = 0x03,  /*!< Data Transmission process is ongoing               */ 
+  HAL_I2S_STATE_BUSY_RX    = 0x04,  /*!< Data Reception process is ongoing                  */
+  HAL_I2S_STATE_BUSY_TX_RX = 0x05,  /*!< Data Transmission and Reception process is ongoing */
+  HAL_I2S_STATE_TIMEOUT    = 0x06,  /*!< I2S timeout state                                  */  
+  HAL_I2S_STATE_ERROR      = 0x07   /*!< I2S error state                                    */      
+                                                                        
+}HAL_I2S_StateTypeDef;
+
+/** 
+  * @brief I2S handle Structure definition  
+  */
+typedef struct
+{
+  SPI_TypeDef                *Instance;    /* I2S registers base address */
+
+  I2S_InitTypeDef            Init;         /* I2S communication parameters */
+  
+  uint16_t                   *pTxBuffPtr;  /* Pointer to I2S Tx transfer buffer */
+  
+  __IO uint16_t              TxXferSize;   /* I2S Tx transfer size */
+  
+  __IO uint16_t              TxXferCount;  /* I2S Tx transfer Counter */
+  
+  uint16_t                   *pRxBuffPtr;  /* Pointer to I2S Rx transfer buffer */
+  
+  __IO uint16_t              RxXferSize;   /* I2S Rx transfer size */
+  
+  __IO uint16_t              RxXferCount;  /* I2S Rx transfer counter 
+                                              (This field is initialized at the 
+                                               same value as transfer size at the 
+                                               beginning of the transfer and 
+                                               decremented when a sample is received. 
+                                               NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+  DMA_HandleTypeDef          *hdmatx;      /* I2S Tx DMA handle parameters */
+
+  DMA_HandleTypeDef          *hdmarx;      /* I2S Rx DMA handle parameters */
+  
+  __IO HAL_LockTypeDef       Lock;         /* I2S locking object */
+  
+  __IO HAL_I2S_StateTypeDef  State;        /* I2S communication state */
+
+  __IO uint32_t  ErrorCode;                /* I2S Error code                 */
+
+}I2S_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
+  * @{
+  */
+
+/** @defgroup I2S_Error_Defintion I2S_Error_Defintion
+  *@brief     I2S Error Code
+  * @{
+  */
+#define HAL_I2S_ERROR_NONE      ((uint32_t)0x00000000)  /*!< No error           */
+#define HAL_I2S_ERROR_TIMEOUT   ((uint32_t)0x00000001)  /*!< Timeout error      */
+#define HAL_I2S_ERROR_OVR       ((uint32_t)0x00000002)  /*!< OVR error          */
+#define HAL_I2S_ERROR_UDR       ((uint32_t)0x00000004)  /*!< UDR error          */
+#define HAL_I2S_ERROR_DMA       ((uint32_t)0x00000008)  /*!< DMA transfer error */
+#define HAL_I2S_ERROR_UNKNOW    ((uint32_t)0x00000010)  /*!< Unknow Error error */
+
+/**
+  * @}
+  */
+/** @defgroup I2S_Clock_Source I2S Clock Source
+  * @{
+  */
+#define I2S_CLOCK_EXTERNAL                ((uint32_t)0x00000001)
+#define I2S_CLOCK_SYSCLK                  ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Mode I2S Mode
+  * @{
+  */
+#define I2S_MODE_SLAVE_TX                ((uint32_t)0x00000000)
+#define I2S_MODE_SLAVE_RX                ((uint32_t)0x00000100)
+#define I2S_MODE_MASTER_TX               ((uint32_t)0x00000200)
+#define I2S_MODE_MASTER_RX               ((uint32_t)0x00000300)
+/**
+  * @}
+  */
+  
+/** @defgroup I2S_Standard I2S Standard
+  * @{
+  */
+#define I2S_STANDARD_PHILIPS             ((uint32_t)0x00000000)
+#define I2S_STANDARD_MSB                 ((uint32_t)0x00000010)
+#define I2S_STANDARD_LSB                 ((uint32_t)0x00000020)
+#define I2S_STANDARD_PCM_SHORT           ((uint32_t)0x00000030)
+#define I2S_STANDARD_PCM_LONG            ((uint32_t)0x000000B0)
+/**
+  * @}
+  */
+  
+/** @defgroup I2S_Data_Format I2S Data Format
+  * @{
+  */
+#define I2S_DATAFORMAT_16B               ((uint32_t)0x00000000)
+#define I2S_DATAFORMAT_16B_EXTENDED      ((uint32_t)0x00000001)
+#define I2S_DATAFORMAT_24B               ((uint32_t)0x00000003)
+#define I2S_DATAFORMAT_32B               ((uint32_t)0x00000005)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_MCLK_Output I2S Mclk Output
+  * @{
+  */
+#define I2S_MCLKOUTPUT_ENABLE           ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE          ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+  * @{
+  */
+#define I2S_AUDIOFREQ_192K               ((uint32_t)192000)
+#define I2S_AUDIOFREQ_96K                ((uint32_t)96000)
+#define I2S_AUDIOFREQ_48K                ((uint32_t)48000)
+#define I2S_AUDIOFREQ_44K                ((uint32_t)44100)
+#define I2S_AUDIOFREQ_32K                ((uint32_t)32000)
+#define I2S_AUDIOFREQ_22K                ((uint32_t)22050)
+#define I2S_AUDIOFREQ_16K                ((uint32_t)16000)
+#define I2S_AUDIOFREQ_11K                ((uint32_t)11025)
+#define I2S_AUDIOFREQ_8K                 ((uint32_t)8000)
+#define I2S_AUDIOFREQ_DEFAULT            ((uint32_t)2)
+/**
+  * @}
+  */
+            
+
+/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
+  * @{
+  */
+#define I2S_CPOL_LOW                    ((uint32_t)0x00000000)
+#define I2S_CPOL_HIGH                   ((uint32_t)SPI_I2SCFGR_CKPOL)
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
+  * @{
+  */
+#define I2S_IT_TXE                      SPI_CR2_TXEIE
+#define I2S_IT_RXNE                     SPI_CR2_RXNEIE
+#define I2S_IT_ERR                      SPI_CR2_ERRIE
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Flags_Definition I2S Flags Definition
+  * @{
+  */ 
+#define I2S_FLAG_TXE                    SPI_SR_TXE
+#define I2S_FLAG_RXNE                   SPI_SR_RXNE
+
+#define I2S_FLAG_UDR                    SPI_SR_UDR
+#define I2S_FLAG_OVR                    SPI_SR_OVR
+#define I2S_FLAG_FRE                    SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE                 SPI_SR_CHSIDE
+#define I2S_FLAG_BSY                    SPI_SR_BSY
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup I2S_Exported_Macros I2S Exported Macros
+  * @{
+  */
+
+/** @brief  Reset I2S handle state
+  * @param  __HANDLE__: specifies the I2S handle.
+  * @retval None
+  */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief  Enable or disable the specified SPI peripheral (in I2S mode).
+  * @param  __HANDLE__: specifies the I2S Handle. 
+  * @retval None
+  */
+#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
+
+/** @brief  Enable or disable the specified I2S interrupts.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
+  *        This parameter can be one of the following values:
+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg I2S_IT_ERR: Error interrupt enable
+  * @retval None
+  */  
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= ~(__INTERRUPT__))
+ 
+/** @brief  Checks if the specified I2S interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  *         This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+  * @param  __INTERRUPT__: specifies the I2S interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg I2S_IT_ERR: Error interrupt enable
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks whether the specified I2S flag is set or not.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+  *            @arg I2S_FLAG_TXE: Transmit buffer empty flag
+  *            @arg I2S_FLAG_UDR: Underrun flag
+  *            @arg I2S_FLAG_OVR: Overrun flag
+  *            @arg I2S_FLAG_FRE: Frame error flag
+  *            @arg I2S_FLAG_CHSIDE: Channel Side flag
+  *            @arg I2S_FLAG_BSY: Busy flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__)     \
+  do{                                           \
+  __IO uint32_t tmpreg = 0x00;                       \
+    tmpreg = (__HANDLE__)->Instance->DR;        \
+    tmpreg = (__HANDLE__)->Instance->SR;        \
+    UNUSED(tmpreg);                             \
+  } while(0)
+    
+/** @brief Clears the I2S UDR pending flag.
+  * @param  __HANDLE__: specifies the I2S Handle.
+  * @retval None
+  */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)     \
+  do{                                             \
+__IO uint32_t tmpreg = 0x00;                         \
+  tmpreg = (__HANDLE__)->Instance->SR;          \
+  UNUSED(tmpreg);                               \
+  } while(0)
+/**
+  * @}
+  */ 
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions  I2S Exported Functions
+  * @{
+  */
+                                                
+/** @addtogroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @{
+  */
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/** @addtogroup I2S_Exported_Functions_Group2 Input and Output operation functions 
+  * @{
+  */
+/* I/O operation functions  ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/** @addtogroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions
+  * @{
+  */
+/* Peripheral Control and State functions  ************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2S_Private_Constants I2S Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2S_Private_Macros I2S Private Macros
+  * @{
+  */
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) || \
+                                   ((CLOCK) == I2S_CLOCK_SYSCLK))
+								   
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
+                           ((MODE) == I2S_MODE_SLAVE_RX) || \
+                           ((MODE) == I2S_MODE_MASTER_TX)|| \
+                           ((MODE) == I2S_MODE_MASTER_RX))
+                           
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS)   || \
+                                   ((STANDARD) == I2S_STANDARD_MSB)       || \
+                                   ((STANDARD) == I2S_STANDARD_LSB)       || \
+                                   ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+                                   ((STANDARD) == I2S_STANDARD_PCM_LONG))
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B)          || \
+                                    ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+                                    ((FORMAT) == I2S_DATAFORMAT_24B)          || \
+                                    ((FORMAT) == I2S_DATAFORMAT_32B))
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+                                    ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+                                    
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
+                                 ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+                                 ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+								 
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+                           ((CPOL) == I2S_CPOL_HIGH))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */  
+	
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_irda.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1517 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_irda.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   IRDA HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the IrDA SIR ENDEC block (IrDA):
+  *           + Initialization and de-initialization methods
+  *           + IO operation methods
+  *           + Peripheral Control methods
+  *
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    The IRDA HAL driver can be used as follows:
+    
+    (#) Declare a IRDA_HandleTypeDef handle structure.
+    (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API:
+        (##) Enable the USARTx interface clock.
+        (##) IRDA pins configuration:
+            (+++) Enable the clock for the IRDA GPIOs.
+            (+++) Configure these IRDA pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT()
+             and HAL_IRDA_Receive_IT() APIs):
+            (+++) Configure the USARTx interrupt priority.
+            (+++) Enable the NVIC USART IRQ handle.
+        (##) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA()
+             and HAL_IRDA_Receive_DMA() APIs):
+            (+++) Declare a DMA handle structure for the Tx/Rx stream.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.                
+            (+++) Configure the DMA Tx/Rx Stream.
+            (+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
+
+    (#) Program the Baud Rate, Word Length, Parity, IrDA Mode, Prescaler 
+        and Mode(Receiver/Transmitter) in the hirda Init structure.
+
+    (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API:
+        (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+            by calling the customized HAL_IRDA_MspInit() API.
+    -@@- The specific IRDA interrupts (Transmission complete interrupt, 
+        RXNE interrupt and Error Interrupts) will be managed using the macros
+        __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process.
+        
+    (#) Three operation modes are available within this driver :
+             
+    *** Polling mode IO operation ***
+    =================================
+    [..]    
+      (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit() 
+      (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive()
+       
+    *** Interrupt mode IO operation ***    
+    ===================================
+    [..]    
+      (+) Send an amount of data in non blocking mode using HAL_IRDA_Transmit_IT() 
+      (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can 
+           add his own code by customization of function pointer HAL_IRDA_TxCpltCallback
+      (+) Receive an amount of data in non blocking mode using HAL_IRDA_Receive_IT() 
+      (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can 
+           add his own code by customization of function pointer HAL_IRDA_RxCpltCallback                                      
+      (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can 
+           add his own code by customization of function pointer HAL_IRDA_ErrorCallback
+
+    *** DMA mode IO operation ***    
+    =============================
+    [..]
+      (+) Send an amount of data in non blocking mode (DMA) using HAL_IRDA_Transmit_DMA() 
+      (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can 
+           add his own code by customization of function pointer HAL_IRDA_TxCpltCallback
+      (+) Receive an amount of data in non blocking mode (DMA) using HAL_IRDA_Receive_DMA() 
+      (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can 
+           add his own code by customization of function pointer HAL_IRDA_RxCpltCallback                                      
+      (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can 
+           add his own code by customization of function pointer HAL_IRDA_ErrorCallback    
+
+    *** IRDA HAL driver macros list ***
+    ===================================
+    [..]
+      Below the list of most used macros in IRDA HAL driver.
+       
+     (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral 
+     (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral     
+     (+) __HAL_IRDA_GET_FLAG : Checks whether the specified IRDA flag is set or not
+     (+) __HAL_IRDA_CLEAR_FLAG : Clears the specified IRDA pending flag
+     (+) __HAL_IRDA_ENABLE_IT: Enables the specified IRDA interrupt
+     (+) __HAL_IRDA_DISABLE_IT: Disables the specified IRDA interrupt
+      
+     (@) You can refer to the IRDA HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup IRDA IRDA
+  * @brief HAL IRDA module driver
+  * @{
+  */
+#ifdef HAL_IRDA_MODULE_ENABLED
+    
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup IRDA_Private_Constants
+  * @{
+  */
+#define TEACK_REACK_TIMEOUT            1000
+#define HAL_IRDA_TXDMA_TIMEOUTVALUE    22000
+#define IRDA_CR1_FIELDS  ((uint32_t)(USART_CR1_M | USART_CR1_PCE \
+                                   | USART_CR1_PS | USART_CR1_TE | USART_CR1_RE))
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup IRDA_Private_Functions
+  * @{
+  */
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma);
+static void IRDA_DMAError(DMA_HandleTypeDef *hdma); 
+static void IRDA_SetConfig (IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda);
+static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda);
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Functions IrDA Exported Functions
+  * @{
+  */
+
+/** @defgroup IRDA_Exported_Functions_Group1 IrDA Initialization and de-initialization functions 
+  *  @brief    Initialization and Configuration functions 
+  *
+@verbatim 
+
+===============================================================================
+            ##### Initialization and Configuration functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to initialize the USARTx or the UARTy 
+    in IrDA mode.
+      (+) For the asynchronous mode only these parameters can be configured: 
+        (++) BaudRate
+        (++) WordLength 
+        (++) Parity: If the parity is enabled, then the MSB bit of the data written
+             in the data register is transmitted but is changed by the parity bit.
+             Depending on the frame length defined by the M bit (8-bits or 9-bits),
+             please refer to Reference manual for possible IRDA frame formats.
+        (++) Prescaler: A pulse of width less than two and greater than one PSC period(s) may or may
+             not be rejected. The receiver set up time should be managed by software. The IrDA physical layer
+             specification specifies a minimum of 10 ms delay between transmission and 
+             reception (IrDA is a half duplex protocol).
+        (++) Mode: Receiver/transmitter modes
+        (++) IrDAMode: the IrDA can operate in the Normal mode or in the Low power mode.
+    [..]
+    The HAL_IRDA_Init() API follows IRDA configuration procedures (details for the procedures
+    are available in reference manual).
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the IRDA mode according to the specified
+  *         parameters in the IRDA_InitTypeDef and create the associated handle.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda)
+{
+  /* Check the IRDA handle allocation */
+  if(hirda == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the USART/UART associated to the IRDA handle */
+  assert_param(IS_IRDA_INSTANCE(hirda->Instance));
+
+  if(hirda->State == HAL_IRDA_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hirda->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX */
+    HAL_IRDA_MspInit(hirda);
+  }
+
+  hirda->State = HAL_IRDA_STATE_BUSY;
+
+  /* Disable the Peripheral to update the configuration registers */
+  __HAL_IRDA_DISABLE(hirda);
+
+  /* Set the IRDA Communication parameters */
+  IRDA_SetConfig(hirda);
+
+  /* In IRDA mode, the following bits must be kept cleared: 
+  - LINEN, STOP and CLKEN bits in the USART_CR2 register,
+  - SCEN and HDSEL bits in the USART_CR3 register.*/
+  hirda->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN | USART_CR2_STOP); 
+  hirda->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL); 
+
+  /* set the UART/USART in IRDA mode */
+  hirda->Instance->CR3 |= USART_CR3_IREN; 
+
+  /* Enable the Peripheral */
+  __HAL_IRDA_ENABLE(hirda);
+
+  /* TEACK and/or REACK to check before moving hirda->State to Ready */
+  return (IRDA_CheckIdleState(hirda));
+}
+
+/**
+  * @brief  DeInitializes the IRDA peripheral 
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda)
+{
+  /* Check the IRDA handle allocation */
+  if(hirda == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_IRDA_INSTANCE(hirda->Instance)); 
+  
+  hirda->State = HAL_IRDA_STATE_BUSY;
+
+  /* DeInit the low level hardware */
+  HAL_IRDA_MspDeInit(hirda);
+  /* Disable the Peripheral */
+  __HAL_IRDA_DISABLE(hirda);
+
+  hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+  hirda->State = HAL_IRDA_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hirda);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  IRDA MSP Init.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+ __weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+      
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_IRDA_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  IRDA MSP DeInit.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+ __weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+    
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_IRDA_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions 
+  *  @brief   IRDA Transmit/Receive functions 
+  *
+@verbatim   
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================  
+    This subsection provides a set of functions allowing to manage the IRDA data transfers.
+    [..]
+    IrDA is a half duplex communication protocol. If the Transmitter is busy, any data
+    on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver 
+    is busy, data on the TX from the USART to IrDA will not be encoded by IrDA.
+    While receiving data, transmission should be avoided as the data to be transmitted
+    could be corrupted.
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode: the communication is performed in polling mode. 
+            The HAL status of all data processing is returned by the same function 
+            after finishing transfer.  
+       (++) No-Blocking mode: the communication is performed using Interrupts 
+           or DMA, these API's return the HAL status.
+           The end of the data processing will be indicated through the 
+           dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when 
+           using DMA mode.
+           The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks 
+           will be executed respectively at the end of the Transmit or Receive process
+           The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected
+
+    (#) Blocking mode API's are :
+        (++) HAL_IRDA_Transmit()
+        (++) HAL_IRDA_Receive() 
+        
+    (#) Non-Blocking mode API's with Interrupt are :
+        (++) HAL_IRDA_Transmit_IT()
+        (++) HAL_IRDA_Receive_IT()
+        (++) HAL_IRDA_IRQHandler()
+        (++) IRDA_Transmit_IT()
+        (++) IRDA_Receive_IT()
+
+    (#) Non-Blocking mode functions with DMA are :
+        (++) HAL_IRDA_Transmit_DMA()
+        (++) HAL_IRDA_Receive_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+        (++) HAL_IRDA_TxCpltCallback()
+        (++) HAL_IRDA_RxCpltCallback()
+        (++) HAL_IRDA_ErrorCallback()
+      
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sends an amount of data in blocking mode.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Specify timeout value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+   uint16_t* tmp;
+   
+  if ((hirda->State == HAL_IRDA_STATE_READY) || (hirda->State == HAL_IRDA_STATE_BUSY_RX)) 
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+    if(hirda->State == HAL_IRDA_STATE_BUSY_RX) 
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX;
+    }    
+    
+    hirda->TxXferSize = Size;
+    hirda->TxXferCount = Size;
+    while(hirda->TxXferCount > 0)
+    {
+      hirda->TxXferCount--;
+
+        if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, Timeout) != HAL_OK)
+        { 
+          return HAL_TIMEOUT;
+        }
+      if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE))
+        {
+          tmp = (uint16_t*) pData;
+          hirda->Instance->TDR = (*tmp & (uint16_t)0x01FF);   
+          pData +=2;
+        }
+        else
+        { 
+          hirda->Instance->TDR = (*pData++ & (uint8_t)0xFF); 
+        }
+      } 
+
+    if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, Timeout) != HAL_OK)
+    { 
+      return HAL_TIMEOUT;
+    } 
+
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) 
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_READY;
+    }    
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;   
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in blocking mode. 
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @param  Timeout: Specify timeout value    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{ 
+  uint16_t* tmp;
+  uint16_t uhMask;
+  
+  if ((hirda->State == HAL_IRDA_STATE_READY) || (hirda->State == HAL_IRDA_STATE_BUSY_TX))
+  { 
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX) 
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_RX;
+    }    
+    
+    hirda->RxXferSize = Size; 
+    hirda->RxXferCount = Size;
+
+    /* Computation of the mask to apply to the RDR register 
+       of the UART associated to the IRDA */
+    IRDA_MASK_COMPUTATION(hirda);
+    uhMask = hirda->Mask;
+
+    /* Check data remaining to be received */
+    while(hirda->RxXferCount > 0)
+    {
+      hirda->RxXferCount--;
+
+      if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      { 
+        return HAL_TIMEOUT;
+      }         
+      if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE))
+      {
+        tmp = (uint16_t*) pData ;
+        *tmp = (uint16_t)(hirda->Instance->RDR & uhMask);
+        pData +=2;
+      }
+      else
+      {
+        *pData++ = (uint8_t)(hirda->Instance->RDR & (uint8_t)uhMask); 
+      }       
+    } 
+
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) 
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_READY;
+    }
+     
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;   
+  }
+}
+
+/**
+  * @brief  Send an amount of data in non blocking mode. 
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+  if ((hirda->State == HAL_IRDA_STATE_READY) || (hirda->State == HAL_IRDA_STATE_BUSY_RX))
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+    
+    hirda->pTxBuffPtr = pData;
+    hirda->TxXferSize = Size;
+    hirda->TxXferCount = Size;
+
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    if(hirda->State == HAL_IRDA_STATE_BUSY_RX) 
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX;
+    }
+        
+    /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_ERR);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);    
+    
+    /* Enable the IRDA Transmit Complete Interrupt */
+    __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TC);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;   
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in non blocking mode. 
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{  
+  if ((hirda->State == HAL_IRDA_STATE_READY) || (hirda->State == HAL_IRDA_STATE_BUSY_TX))
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+    
+    /* Process Locked */
+  __HAL_LOCK(hirda);
+  
+    hirda->pRxBuffPtr = pData;
+    hirda->RxXferSize = Size;
+    hirda->RxXferCount = Size;
+  
+    /* Computation of the mask to apply to the RDR register 
+       of the UART associated to the IRDA */
+    IRDA_MASK_COMPUTATION(hirda); 
+  
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;  
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX) 
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_RX;
+    }
+    
+    /* Enable the IRDA Parity Error Interrupt */
+    __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_PE);
+    
+    /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_ERR);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+    
+    /* Enable the IRDA Data Register not empty Interrupt */
+    __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_RXNE);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief  Sends an amount of data in non blocking mode. 
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  
+  if ((hirda->State == HAL_IRDA_STATE_READY) || (hirda->State == HAL_IRDA_STATE_BUSY_RX))
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+    
+    hirda->pTxBuffPtr = pData;
+    hirda->TxXferSize = Size;
+    hirda->TxXferCount = Size; 
+    
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    
+    if(hirda->State == HAL_IRDA_STATE_BUSY_RX) 
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX;
+    }
+    
+    /* Set the IRDA DMA transfer complete callback */
+    hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt;
+    
+    /* Set the IRDA DMA half transfer complete callback */
+    hirda->hdmatx->XferHalfCpltCallback = IRDA_DMATransmitHalfCplt;
+
+    /* Set the DMA error callback */
+    hirda->hdmatx->XferErrorCallback = IRDA_DMAError;
+
+    /* Enable the IRDA transmit DMA channel */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hirda->hdmatx, *(uint32_t*)tmp, (uint32_t)&hirda->Instance->TDR, Size);
+   
+    /* Clear the TC flag in the SR register by writing 0 to it */
+    __HAL_IRDA_CLEAR_IT(hirda, IRDA_FLAG_TC);
+   
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the IRDA CR3 register */
+    hirda->Instance->CR3 |= USART_CR3_DMAT;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hirda);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;   
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in non blocking mode. 
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @note   When the IRDA parity is enabled (PCE = 1) the data received contain the parity bit.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  
+  if ((hirda->State == HAL_IRDA_STATE_READY) || (hirda->State == HAL_IRDA_STATE_BUSY_TX))
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hirda);
+    
+    hirda->pRxBuffPtr = pData;
+    hirda->RxXferSize = Size;
+
+    hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX) 
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_RX;
+    }
+    
+    /* Set the IRDA DMA transfer complete callback */
+    hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt;
+    
+    /* Set the IRDA DMA half transfer complete callback */
+    hirda->hdmarx->XferHalfCpltCallback = IRDA_DMAReceiveHalfCplt;
+    
+    /* Set the DMA error callback */
+    hirda->hdmarx->XferErrorCallback = IRDA_DMAError;
+
+    /* Enable the DMA channel */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->RDR, *(uint32_t*)tmp, Size);
+
+    /* Enable the DMA transfer for the receiver request by setting the DMAR bit 
+       in the IRDA CR3 register */
+     hirda->Instance->CR3 |= USART_CR3_DMAR;
+    
+     /* Process Unlocked */
+     __HAL_UNLOCK(hirda);
+     
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief Pauses the DMA Transfer.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda)
+{
+  /* Process Locked */
+  __HAL_LOCK(hirda);
+  
+  if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
+  {
+    /* Disable the UART DMA Tx request */
+    hirda->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+  }
+  else if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
+  {
+    /* Disable the UART DMA Rx request */
+    hirda->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+  }
+  else if (hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+  {
+    /* Disable the UART DMA Tx & Rx requests */
+    hirda->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+    hirda->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hirda);
+  
+  return HAL_OK; 
+}
+
+/**
+  * @brief Resumes the DMA Transfer.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda)
+{
+  /* Process Locked */
+  __HAL_LOCK(hirda);
+  
+  if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
+  {
+    /* Enable the UART DMA Tx request */
+    hirda->Instance->CR3 |= USART_CR3_DMAT;
+  }
+  else if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
+  {
+    /* Clear the Overrun flag before resuming the Rx transfer*/
+    __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_OREF);
+
+    /* Enable the UART DMA Rx request */
+    hirda->Instance->CR3 |= USART_CR3_DMAR;
+  }
+  else if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+  {
+    /* Clear the Overrun flag before resuming the Rx transfer*/
+    __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_OREF);
+    
+    /* Enable the UART DMA Tx & Rx request */
+    hirda->Instance->CR3 |= USART_CR3_DMAT;
+    hirda->Instance->CR3 |= USART_CR3_DMAR;
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hirda);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief Stops the DMA Transfer.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda)
+{
+  /* The Lock is not implemented on this API to allow the user application
+     to call the HAL IRDA API under callbacks HAL_IRDA_TxCpltCallback() / HAL_IRDA_RxCpltCallback() /
+     HAL_IRDA_TxHalfCpltCallback / HAL_IRDA_RxHalfCpltCallback: 
+     indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete  
+     interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of 
+     the stream and the corresponding call back is executed. */
+
+  /* Disable the UART Tx/Rx DMA requests */
+  hirda->Instance->CR3 &= ~USART_CR3_DMAT;
+  hirda->Instance->CR3 &= ~USART_CR3_DMAR;
+  
+  /* Abort the UART DMA tx channel */
+  if(hirda->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(hirda->hdmatx);
+  }
+  /* Abort the UART DMA rx channel */
+  if(hirda->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(hirda->hdmarx);
+  }
+  
+  hirda->State = HAL_IRDA_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles IRDA interrupt request.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda)
+{
+  /* IRDA parity error interrupt occurred -------------------------------------*/
+  if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_PE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_PE) != RESET))
+  { 
+    __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_PEF);
+
+    hirda->ErrorCode |= HAL_IRDA_ERROR_PE;
+    /* Set the IRDA state ready to be able to start again the process */
+    hirda->State = HAL_IRDA_STATE_READY;
+  }
+  
+  /* IRDA frame error interrupt occurred --------------------------------------*/
+  if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_FE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR) != RESET))
+  { 
+    __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_FEF);
+
+    hirda->ErrorCode |= HAL_IRDA_ERROR_FE;
+    /* Set the IRDA state ready to be able to start again the process */
+    hirda->State = HAL_IRDA_STATE_READY;
+  }
+  
+  /* IRDA noise error interrupt occurred --------------------------------------*/
+  if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_NE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR) != RESET))
+  { 
+    __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_NEF);
+
+    hirda->ErrorCode |= HAL_IRDA_ERROR_NE; 
+    /* Set the IRDA state ready to be able to start again the process */
+    hirda->State = HAL_IRDA_STATE_READY;
+  }
+  
+  /* IRDA Over-Run interrupt occurred -----------------------------------------*/
+  if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_ORE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR) != RESET))
+  { 
+    __HAL_IRDA_CLEAR_IT(hirda, IRDA_CLEAR_OREF);
+
+    hirda->ErrorCode |= HAL_IRDA_ERROR_ORE; 
+    /* Set the IRDA state ready to be able to start again the process */
+    hirda->State = HAL_IRDA_STATE_READY;
+  }
+  
+  /* Call IRDA Error Call back function if need be --------------------------*/
+  if(hirda->ErrorCode != HAL_IRDA_ERROR_NONE)
+  {
+    HAL_IRDA_ErrorCallback(hirda);
+  } 
+
+  /* IRDA in mode Receiver ---------------------------------------------------*/
+  if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_RXNE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_RXNE) != RESET))
+  { 
+    IRDA_Receive_IT(hirda);
+    /* Clear RXNE interrupt flag */
+    __HAL_IRDA_SEND_REQ(hirda, IRDA_RXDATA_FLUSH_REQUEST);
+  }
+  
+  /* IRDA in mode Transmitter ------------------------------------------------*/
+ if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_TXE) != RESET) &&(__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TXE) != RESET))
+  {
+    IRDA_Transmit_IT(hirda);
+  } 
+
+  /* IRDA in mode Transmitter (transmission end) -----------------------------*/
+ if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_TC) != RESET) &&(__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TC) != RESET))
+  {
+    IRDA_EndTransmit_IT(hirda);
+  }   
+}
+
+/**
+  * @brief  Tx Transfer complete callbacks.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+ __weak void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+    
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_TxHalfCpltCallback can be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Tx Half Transfer completed callbacks.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval None
+  */
+ __weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+    
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_TxCpltCallback can be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Rx Transfer complete callbacks.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+    
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_RxHalfCpltCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Half Transfer complete callbacks.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+    
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_RxCpltCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @brief IRDA error callbacks.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval None
+  */
+ __weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hirda);
+    
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IRDA_ErrorCallback can be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Exported_Functions_Group3 Peripheral Control functions 
+  *  @brief   IRDA control functions 
+  *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the IRDA.
+     (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state of the IRDA peripheral. 
+     (+) IRDA_SetConfig() API is used to configure the IRDA communications parameters.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the IRDA state.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL state
+  */
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda)
+{
+  return hirda->State;
+}
+
+/**
+  * @brief  Return the IRDA error code
+  * @param  hirda : pointer to a IRDA_HandleTypeDef structure that contains
+  *              the configuration information for the specified IRDA.
+* @retval IRDA Error Code
+*/
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda)
+{
+  return hirda->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief Configure the IRDA peripheral 
+  * @param hirda: irda handle
+  * @retval None
+  */
+static void IRDA_SetConfig(IRDA_HandleTypeDef *hirda)
+{
+  uint32_t tmpreg      = 0x00000000;
+  uint32_t clocksource = 0x00000000;
+  
+  /* Check the communication parameters */ 
+  assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate));  
+  assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength));
+  assert_param(IS_IRDA_PARITY(hirda->Init.Parity));
+  assert_param(IS_IRDA_TX_RX_MODE(hirda->Init.Mode));
+  assert_param(IS_IRDA_PRESCALER(hirda->Init.Prescaler)); 
+  assert_param(IS_IRDA_POWERMODE(hirda->Init.PowerMode)); 
+  /*-------------------------- USART CR1 Configuration -----------------------*/        
+  /* Configure the IRDA Word Length, Parity and transfer Mode: 
+  Set the M bits according to hirda->Init.WordLength value 
+  Set PCE and PS bits according to hirda->Init.Parity value
+  Set TE and RE bits according to hirda->Init.Mode value */
+  tmpreg = (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode ;
+  
+  MODIFY_REG(hirda->Instance->CR1, IRDA_CR1_FIELDS, tmpreg);
+  
+  /*-------------------------- USART CR3 Configuration -----------------------*/
+  MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.PowerMode);
+  
+  /*-------------------------- USART GTPR Configuration ----------------------*/  
+  MODIFY_REG(hirda->Instance->GTPR, (uint32_t)USART_GTPR_PSC, hirda->Init.Prescaler);
+  
+  /*-------------------------- USART BRR Configuration -----------------------*/ 
+  IRDA_GETCLOCKSOURCE(hirda, clocksource);
+  switch (clocksource)
+  {
+  case IRDA_CLOCKSOURCE_PCLK1: 
+    hirda->Instance->BRR = (uint16_t)(HAL_RCC_GetPCLK1Freq() / hirda->Init.BaudRate);
+    break;
+  case IRDA_CLOCKSOURCE_PCLK2: 
+    hirda->Instance->BRR = (uint16_t)(HAL_RCC_GetPCLK2Freq() / hirda->Init.BaudRate);
+    break;
+  case IRDA_CLOCKSOURCE_HSI: 
+    hirda->Instance->BRR = (uint16_t)(HSI_VALUE / hirda->Init.BaudRate); 
+    break; 
+  case IRDA_CLOCKSOURCE_SYSCLK:  
+    hirda->Instance->BRR = (uint16_t)(HAL_RCC_GetSysClockFreq() / hirda->Init.BaudRate);
+    break;  
+  case IRDA_CLOCKSOURCE_LSE:                
+    hirda->Instance->BRR = (uint16_t)(LSE_VALUE / hirda->Init.BaudRate); 
+    break;
+  default:
+    break;
+  } 
+}
+
+/**
+  * @brief Check the IRDA Idle State
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_CheckIdleState(IRDA_HandleTypeDef *hirda)
+{
+  /* Initialize the IRDA ErrorCode */
+  hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+  
+  /* Check if the Transmitter is enabled */
+  if((hirda->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
+  {
+    /* Wait until TEACK flag is set */
+    if(IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_TEACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)
+    { 
+      hirda->State= HAL_IRDA_STATE_TIMEOUT;
+      return HAL_TIMEOUT;
+    }     
+  }
+  /* Check if the Receiver is enabled */
+  if((hirda->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
+  {
+    if(IRDA_WaitOnFlagUntilTimeout(hirda, USART_ISR_REACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)
+    { 
+      hirda->State= HAL_IRDA_STATE_TIMEOUT;
+      return HAL_TIMEOUT;
+    }       
+  }
+  /* Process Unlocked */
+  __HAL_UNLOCK(hirda);
+  
+  /* Initialize the IRDA state*/
+  hirda->State= HAL_IRDA_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles IRDA Communication Timeout.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @param  Flag: specifies the IRDA flag to check.
+  * @param  Status: The new Flag status (SET or RESET).
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Timeout)  
+{
+  uint32_t tickstart = 0x00;
+  tickstart = HAL_GetTick();
+  
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_IRDA_GET_FLAG(hirda, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE);
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+
+          hirda->State= HAL_IRDA_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hirda);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_IRDA_GET_FLAG(hirda, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE);
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
+          __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+
+          hirda->State= HAL_IRDA_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hirda);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;      
+}
+
+/**
+  * @brief  Send an amount of data in non blocking mode. 
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda)
+{
+  uint16_t* tmp;
+  
+  if((hirda->State == HAL_IRDA_STATE_BUSY_TX) || (hirda->State == HAL_IRDA_STATE_BUSY_TX_RX))
+  {
+    if(hirda->TxXferCount == 0)
+    {
+      /* Disable the IRDA Transmit Complete Interrupt */
+      __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
+      
+      if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) 
+      {
+        hirda->State = HAL_IRDA_STATE_BUSY_RX;
+      }
+      else
+      {
+        /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+        __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+        
+        hirda->State = HAL_IRDA_STATE_READY;
+      }
+
+      HAL_IRDA_TxCpltCallback(hirda);
+      
+      return HAL_OK;
+    }
+    else
+    {
+      if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE))
+      {
+        tmp = (uint16_t*) hirda->pTxBuffPtr;
+        hirda->Instance->TDR = (*tmp & (uint16_t)0x01FF);
+        hirda->pTxBuffPtr += 2;
+      }
+      else
+      {
+        hirda->Instance->TDR = (uint8_t)(*hirda->pTxBuffPtr++ & (uint8_t)0xFF); 
+      }
+      hirda->TxXferCount--;
+      return HAL_OK;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Wraps up transmission in non blocking mode.
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda)
+{
+  /* Disable the IRDA Transmit Complete Interrupt */    
+  __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TC);
+  
+  /* Check if a receive process is ongoing or not */
+  if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) 
+  {
+    hirda->State = HAL_IRDA_STATE_BUSY_RX;
+  }
+  else
+  {
+    /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+
+    hirda->State = HAL_IRDA_STATE_READY;
+  }
+  
+  HAL_IRDA_TxCpltCallback(hirda);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief Receive an amount of data in non blocking mode. 
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_IRDA_Receive_IT()
+  * @param  hirda: pointer to a IRDA_HandleTypeDef structure that contains
+  *                the configuration information for the specified IRDA module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda)
+{
+  uint16_t* tmp;
+  uint16_t uhMask = hirda->Mask;
+  
+  if ((hirda->State == HAL_IRDA_STATE_BUSY_RX) || (hirda->State == HAL_IRDA_STATE_BUSY_TX_RX))
+  {
+    if ((hirda->Init.WordLength == IRDA_WORDLENGTH_9B) && (hirda->Init.Parity == IRDA_PARITY_NONE))
+    {
+      tmp = (uint16_t*) hirda->pRxBuffPtr ;
+      *tmp = (uint16_t)(hirda->Instance->RDR & uhMask);
+      hirda->pRxBuffPtr  +=2;
+    }
+    else
+    {
+      *hirda->pRxBuffPtr++ = (uint8_t)(hirda->Instance->RDR & (uint8_t)uhMask); 
+    }
+    
+    if(--hirda->RxXferCount == 0)
+    {
+      while(HAL_IS_BIT_SET(hirda->Instance->ISR, IRDA_FLAG_RXNE))
+      {
+      }
+      __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE);
+      
+      if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) 
+      {
+        hirda->State = HAL_IRDA_STATE_BUSY_TX;
+      }
+      else
+      {      
+        /* Disable the IRDA Parity Error Interrupt */
+        __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
+        
+        /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
+        __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
+        
+        hirda->State = HAL_IRDA_STATE_READY;
+      }
+      
+      HAL_IRDA_RxCpltCallback(hirda);
+      
+      return HAL_OK;
+    }
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+  
+/**
+  * @brief DMA IRDA Tx transfer completed callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma)     
+{
+  IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* DMA Normal mode*/
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    hirda->TxXferCount = 0;
+
+    /* Disable the DMA transfer for transmit request by setting the DMAT bit
+       in the IRDA CR3 register */
+    hirda->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);
+
+    /* Enable the IRDA Transmit Complete Interrupt */    
+    __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TC);
+  }
+  /* DMA Circular mode */
+  else
+  {
+   HAL_IRDA_TxCpltCallback(hirda);
+  }
+}
+
+/**
+  * @brief DMA IRDA receive process half complete callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_IRDA_TxHalfCpltCallback(hirda); 
+}
+
+/**
+  * @brief DMA IRDA Rx Transfer completed callback 
+  * @param hdma: DMA handle
+  * @retval None
+  */
+static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma)  
+{
+  IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+	
+  /* DMA Normal mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    hirda->RxXferCount = 0;
+
+    /* Disable the DMA transfer for the receiver request by setting the DMAR bit 
+       in the IRDA CR3 register */
+    hirda->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAR);
+
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) 
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_TX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_READY;
+    }
+  }
+
+  HAL_IRDA_RxCpltCallback(hirda);
+}
+
+/**
+  * @brief DMA IRDA receive process half complete callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_IRDA_RxHalfCpltCallback(hirda); 
+}
+
+/**
+  * @brief DMA IRDA communication error callback 
+  * @param hdma: DMA handle
+  * @retval None
+  */
+static void IRDA_DMAError(DMA_HandleTypeDef *hdma)   
+{
+  IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hirda->RxXferCount = 0;
+  hirda->TxXferCount = 0;
+  hirda->State= HAL_IRDA_STATE_READY;
+  hirda->ErrorCode |= HAL_IRDA_ERROR_DMA;
+  HAL_IRDA_ErrorCallback(hirda);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_irda.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,643 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_irda.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of IRDA HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_IRDA_H
+#define __STM32F7xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup IRDA
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup IRDA_Exported_Types IRDA Exported Types
+  * @{
+  */
+/** 
+  * @brief IRDA Init Structure definition  
+  */ 
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< This member configures the IRDA communication baud rate.
+                                           The baud rate register is computed using the following formula:
+                                              Baud Rate Register = ((PCLKx) / ((hirda->Init.BaudRate))) */
+
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter can be a value of @ref IRDAEx_Word_Length */
+
+  uint32_t Parity;                    /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref IRDA_Parity
+                                           @note When parity is enabled, the computed parity is inserted
+                                                 at the MSB position of the transmitted data (9th bit when
+                                                 the word length is set to 9 data bits; 8th bit when the
+                                                 word length is set to 8 data bits). */
+ 
+  uint16_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref IRDA_Transfer_Mode */
+  
+  uint8_t  Prescaler;                 /*!< Specifies the Prescaler value for dividing the UART/USART source clock
+                                           to achieve low-power frequency.
+                                           @note Prescaler value 0 is forbidden */
+  
+  uint16_t PowerMode;                 /*!< Specifies the IRDA power mode.
+                                           This parameter can be a value of @ref IRDA_Low_Power */
+}IRDA_InitTypeDef;
+
+/** 
+  * @brief HAL State structures definition  
+  */ 
+typedef enum
+{
+  HAL_IRDA_STATE_RESET             = 0x00,    /*!< Peripheral is not yet Initialized */
+  HAL_IRDA_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use */
+  HAL_IRDA_STATE_BUSY              = 0x02,    /*!< An internal process is ongoing */
+  HAL_IRDA_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing */
+  HAL_IRDA_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing */
+  HAL_IRDA_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission and Reception process is ongoing */
+  HAL_IRDA_STATE_TIMEOUT           = 0x03,    /*!< Timeout state */
+  HAL_IRDA_STATE_ERROR             = 0x04     /*!< Error */
+}HAL_IRDA_StateTypeDef;
+
+/**
+  * @brief IRDA clock sources definition
+  */
+typedef enum
+{
+  IRDA_CLOCKSOURCE_PCLK1      = 0x00,    /*!< PCLK1 clock source  */
+  IRDA_CLOCKSOURCE_PCLK2      = 0x01,    /*!< PCLK2 clock source  */
+  IRDA_CLOCKSOURCE_HSI        = 0x02,    /*!< HSI clock source    */
+  IRDA_CLOCKSOURCE_SYSCLK     = 0x04,    /*!< SYSCLK clock source */
+  IRDA_CLOCKSOURCE_LSE        = 0x08     /*!< LSE clock source     */
+}IRDA_ClockSourceTypeDef;
+
+/** 
+  * @brief  IRDA handle Structure definition  
+  */
+typedef struct
+{
+  USART_TypeDef            *Instance;        /* IRDA registers base address        */
+
+  IRDA_InitTypeDef         Init;             /* IRDA communication parameters      */
+
+  uint8_t                  *pTxBuffPtr;      /* Pointer to IRDA Tx transfer Buffer */
+
+  uint16_t                 TxXferSize;       /* IRDA Tx Transfer size              */
+
+  uint16_t                 TxXferCount;      /* IRDA Tx Transfer Counter           */
+
+  uint8_t                  *pRxBuffPtr;      /* Pointer to IRDA Rx transfer Buffer */
+
+  uint16_t                 RxXferSize;       /* IRDA Rx Transfer size              */
+
+  uint16_t                 RxXferCount;      /* IRDA Rx Transfer Counter           */
+
+  uint16_t                 Mask;             /* IRDA RX RDR register mask         */
+
+  DMA_HandleTypeDef        *hdmatx;          /* IRDA Tx DMA Handle parameters      */
+
+  DMA_HandleTypeDef        *hdmarx;          /* IRDA Rx DMA Handle parameters      */
+
+  HAL_LockTypeDef          Lock;             /* Locking object                     */
+
+  __IO HAL_IRDA_StateTypeDef    State;       /* IRDA communication state           */
+
+  __IO uint32_t    ErrorCode;   /* IRDA Error code                    */
+
+}IRDA_HandleTypeDef;
+
+/**
+  * @}
+  */ 
+
+/** 
+  * @brief  IRDA Configuration enumeration values definition  
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported constants
+  * @{
+  */
+/** @defgroup IRDA_Error_Code IRDA Error Code
+  * @brief    IRDA Error Code 
+  * @{
+  */ 
+
+#define HAL_IRDA_ERROR_NONE      ((uint32_t)0x00000000)    /*!< No error            */
+#define HAL_IRDA_ERROR_PE        ((uint32_t)0x00000001)    /*!< Parity error        */
+#define HAL_IRDA_ERROR_NE        ((uint32_t)0x00000002)    /*!< Noise error         */
+#define HAL_IRDA_ERROR_FE        ((uint32_t)0x00000004)    /*!< frame error         */
+#define HAL_IRDA_ERROR_ORE       ((uint32_t)0x00000008)    /*!< Overrun error       */
+#define HAL_IRDA_ERROR_DMA       ((uint32_t)0x00000010)    /*!< DMA transfer error  */
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Parity IRDA Parity
+  * @{
+  */ 
+#define IRDA_PARITY_NONE                    ((uint32_t)0x0000)
+#define IRDA_PARITY_EVEN                    ((uint32_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD                     ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode
+  * @{
+  */ 
+#define IRDA_MODE_RX                        ((uint32_t)USART_CR1_RE)
+#define IRDA_MODE_TX                        ((uint32_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX                     ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+  * @{
+  */
+#define IRDA_POWERMODE_NORMAL                    ((uint32_t)0x0000)
+#define IRDA_POWERMODE_LOWPOWER                  ((uint32_t)USART_CR3_IRLP)
+/**
+  * @}
+  */
+    
+ /** @defgroup IRDA_State IRDA State
+  * @{
+  */ 
+#define IRDA_STATE_DISABLE                  ((uint32_t)0x0000)
+#define IRDA_STATE_ENABLE                   ((uint32_t)USART_CR1_UE)
+/**
+  * @}
+  */
+
+ /** @defgroup IRDA_Mode IRDA Mode
+  * @{
+  */ 
+#define IRDA_MODE_DISABLE                  ((uint32_t)0x0000)
+#define IRDA_MODE_ENABLE                   ((uint32_t)USART_CR3_IREN)
+/**
+  * @}
+  */
+
+/** @defgroup IRDA_One_Bit IRDA One Bit
+  * @{
+  */
+#define IRDA_ONE_BIT_SAMPLE_DISABLE          ((uint32_t)0x00000000)
+#define IRDA_ONE_BIT_SAMPLE_ENABLE           ((uint32_t)USART_CR3_ONEBIT)
+/**
+  * @}
+  */  
+  
+/** @defgroup IRDA_DMA_Tx IRDA DMA Tx
+  * @{
+  */
+#define IRDA_DMA_TX_DISABLE          ((uint32_t)0x00000000)
+#define IRDA_DMA_TX_ENABLE           ((uint32_t)USART_CR3_DMAT)
+/**
+  * @}
+  */  
+  
+/** @defgroup IRDA_DMA_Rx IRDA DMA Rx
+  * @{
+  */
+#define IRDA_DMA_RX_DISABLE           ((uint32_t)0x0000)
+#define IRDA_DMA_RX_ENABLE            ((uint32_t)USART_CR3_DMAR)
+/**
+  * @}
+  */
+  
+/** @defgroup IRDA_Flags IRDA Flags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the ISR register
+  * @{
+  */
+#define IRDA_FLAG_REACK                     ((uint32_t)0x00400000)
+#define IRDA_FLAG_TEACK                     ((uint32_t)0x00200000)  
+#define IRDA_FLAG_BUSY                      ((uint32_t)0x00010000)
+#define IRDA_FLAG_ABRF                      ((uint32_t)0x00008000)  
+#define IRDA_FLAG_ABRE                      ((uint32_t)0x00004000)
+#define IRDA_FLAG_TXE                       ((uint32_t)0x00000080)
+#define IRDA_FLAG_TC                        ((uint32_t)0x00000040)
+#define IRDA_FLAG_RXNE                      ((uint32_t)0x00000020)
+#define IRDA_FLAG_ORE                       ((uint32_t)0x00000008)
+#define IRDA_FLAG_NE                        ((uint32_t)0x00000004)
+#define IRDA_FLAG_FE                        ((uint32_t)0x00000002)
+#define IRDA_FLAG_PE                        ((uint32_t)0x00000001)
+/**
+  * @}
+  */ 
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupt definition
+  *        Elements values convention: 0000ZZZZ0XXYYYYYb
+  *           - YYYYY  : Interrupt source position in the XX register (5bits)
+  *           - XX  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR2 register
+  *                 - 11: CR3 register
+  *           - ZZZZ  : Flag position in the ISR register(4bits)
+  * @{   
+  */  
+#define IRDA_IT_PE                          ((uint16_t)0x0028)
+#define IRDA_IT_TXE                         ((uint16_t)0x0727)
+#define IRDA_IT_TC                          ((uint16_t)0x0626)
+#define IRDA_IT_RXNE                        ((uint16_t)0x0525)
+#define IRDA_IT_IDLE                        ((uint16_t)0x0424)
+
+
+                                
+/**       Elements values convention: 000000000XXYYYYYb
+  *           - YYYYY  : Interrupt source position in the XX register (5bits)
+  *           - XX  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR2 register
+  *                 - 11: CR3 register
+  */
+#define IRDA_IT_ERR                         ((uint16_t)0x0060)
+
+/**       Elements values convention: 0000ZZZZ00000000b
+  *           - ZZZZ  : Flag position in the ISR register(4bits)
+  */
+#define IRDA_IT_ORE                         ((uint16_t)0x0300)
+#define IRDA_IT_NE                          ((uint16_t)0x0200)
+#define IRDA_IT_FE                          ((uint16_t)0x0100)
+/**
+  * @}
+  */
+  
+/** @defgroup IRDA_IT_CLEAR_Flags IRDA IT CLEAR Flags
+  * @{
+  */
+#define IRDA_CLEAR_PEF                       USART_ICR_PECF            /*!< Parity Error Clear Flag */          
+#define IRDA_CLEAR_FEF                       USART_ICR_FECF            /*!< Framing Error Clear Flag */         
+#define IRDA_CLEAR_NEF                       USART_ICR_NCF             /*!< Noise detected Clear Flag */        
+#define IRDA_CLEAR_OREF                      USART_ICR_ORECF           /*!< OverRun Error Clear Flag */         
+#define IRDA_CLEAR_TCF                       USART_ICR_TCCF            /*!< Transmission Complete Clear Flag */ 
+/**
+  * @}
+  */ 
+
+
+
+/** @defgroup IRDA_Request_Parameters IRDA Request Parameters
+  * @{
+  */
+#define IRDA_AUTOBAUD_REQUEST            ((uint16_t)USART_RQR_ABRRQ)        /*!< Auto-Baud Rate Request */     
+#define IRDA_RXDATA_FLUSH_REQUEST        ((uint16_t)USART_RQR_RXFRQ)        /*!< Receive Data flush Request */ 
+#define IRDA_TXDATA_FLUSH_REQUEST        ((uint16_t)USART_RQR_TXFRQ)        /*!< Transmit data flush Request */
+/**
+  * @}
+  */
+  
+/**
+ * @}
+ */
+
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
+  * @{
+  */
+
+/** @brief Reset IRDA handle state
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @retval None
+  */
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET)
+
+/** @brief  Check whether the specified IRDA flag is set or not.
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  *         UART peripheral
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg IRDA_FLAG_REACK: Receive enable acknowledge flag
+  *            @arg IRDA_FLAG_TEACK: Transmit enable acknowledge flag
+  *            @arg IRDA_FLAG_BUSY:  Busy flag
+  *            @arg IRDA_FLAG_ABRF:  Auto Baud rate detection flag
+  *            @arg IRDA_FLAG_ABRE:  Auto Baud rate detection error flag
+  *            @arg IRDA_FLAG_TXE:   Transmit data register empty flag
+  *            @arg IRDA_FLAG_TC:    Transmission Complete flag
+  *            @arg IRDA_FLAG_RXNE:  Receive data register not empty flag
+  *            @arg IRDA_FLAG_IDLE:  Idle Line detection flag
+  *            @arg IRDA_FLAG_ORE:   OverRun Error flag
+  *            @arg IRDA_FLAG_NE:    Noise Error flag
+  *            @arg IRDA_FLAG_FE:    Framing Error flag
+  *            @arg IRDA_FLAG_PE:    Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))   
+
+/** @brief  Enable the specified IRDA interrupt.
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  *         UART peripheral
+  * @param  __INTERRUPT__: specifies the IRDA interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg IRDA_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg IRDA_IT_TC:   Transmission complete interrupt
+  *            @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg IRDA_IT_IDLE: Idle line detection interrupt
+  *            @arg IRDA_IT_PE:   Parity Error interrupt
+  *            @arg IRDA_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 |= (1 << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+                                                          ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 |= (1 << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+                                                          ((__HANDLE__)->Instance->CR3 |= (1 << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+/** @brief  Disable the specified IRDA interrupt.
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __INTERRUPT__: specifies the IRDA interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg IRDA_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg IRDA_IT_TC:   Transmission complete interrupt
+  *            @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg IRDA_IT_IDLE: Idle line detection interrupt
+  *            @arg IRDA_IT_PE:   Parity Error interrupt
+  *            @arg IRDA_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__)  (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+                                                           ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+                                                           ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+/** @brief  Check whether the specified IRDA interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __IT__: specifies the IRDA interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg IRDA_IT_TC:  Transmission complete interrupt
+  *            @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg IRDA_IT_IDLE: Idle line detection interrupt
+  *            @arg IRDA_IT_ORE: OverRun Error interrupt
+  *            @arg IRDA_IT_NE: Noise Error interrupt
+  *            @arg IRDA_IT_FE: Framing Error interrupt
+  *            @arg IRDA_IT_PE: Parity Error interrupt  
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08))) 
+
+/** @brief  Check whether the specified IRDA interrupt source is enabled.
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __IT__: specifies the IRDA interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg IRDA_IT_TC:  Transmission complete interrupt
+  *            @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg IRDA_IT_IDLE: Idle line detection interrupt
+  *            @arg IRDA_IT_ORE: OverRun Error interrupt
+  *            @arg IRDA_IT_NE: Noise Error interrupt
+  *            @arg IRDA_IT_FE: Framing Error interrupt
+  *            @arg IRDA_IT_PE: Parity Error interrupt  
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \
+                                                          (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & IRDA_IT_MASK)))
+
+/** @brief  Clear the specified IRDA ISR flag, in setting the proper ICR register flag.
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+  *                       to clear the corresponding interrupt
+  *          This parameter can be one of the following values:
+  *            @arg IRDA_CLEAR_PEF: Parity Error Clear Flag
+  *            @arg IRDA_CLEAR_FEF: Framing Error Clear Flag
+  *            @arg IRDA_CLEAR_NEF: Noise detected Clear Flag
+  *            @arg IRDA_CLEAR_OREF: OverRun Error Clear Flag
+  *            @arg IRDA_CLEAR_TCF: Transmission Complete Clear Flag 
+  * @retval None
+  */
+#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__))
+
+/** @brief  Set a specific IRDA request flag.
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __REQ__: specifies the request flag to set
+  *          This parameter can be one of the following values:
+  *            @arg IRDA_AUTOBAUD_REQUEST: Auto-Baud Rate Request     
+  *            @arg IRDA_RXDATA_FLUSH_REQUEST: Receive Data flush Request 
+  *            @arg IRDA_TXDATA_FLUSH_REQUEST: Transmit data flush Request 
+  *
+  * @retval None
+  */
+#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) 
+
+/** @brief  Enable UART/USART associated to IRDA Handle
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @retval None
+  */
+#define __HAL_IRDA_ENABLE(__HANDLE__)                   ((__HANDLE__)->Instance->CR1 |=  USART_CR1_UE)
+
+/** @brief  Disable UART/USART associated to IRDA Handle
+  * @param  __HANDLE__: specifies the IRDA Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @retval None
+  */
+#define __HAL_IRDA_DISABLE(__HANDLE__)                  ((__HANDLE__)->Instance->CR1 &=  ~USART_CR1_UE)
+
+/**
+  * @}
+  */
+
+/* Include IRDA HAL Extension module */
+#include "stm32f7xx_hal_irda_ex.h"  
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup IRDA_Exported_Functions IrDA Exported Functions
+  * @{
+  */
+
+/** @addtogroup IRDA_Exported_Functions_Group1 IrDA Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+/**
+  * @}
+  */
+
+/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions
+  * @{
+  */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+/* Peripheral State methods  **************************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IRDA_Private_Constants IRDA Private Constants
+  * @{
+  */
+
+/** @defgroup IRDA_Interruption_Mask IRDA Interruption Mask
+  * @{
+  */ 
+#define IRDA_IT_MASK  ((uint16_t)0x001F)  
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup IRDA_Private_Macros   IRDA Private Macros
+  * @{
+  */
+
+/** @brief  Ensure that IRDA Baud rate is less or equal to maximum value
+  * @param  __BAUDRATE__: specifies the IRDA Baudrate set by the user.
+  * @retval True or False
+  */   
+#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201)
+
+/** @brief  Ensure that IRDA prescaler value is strictly larger than 0
+  * @param  __PRESCALER__: specifies the IRDA prescaler value set by the user.
+  * @retval True or False
+  */  
+#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0)
+
+#define IS_IRDA_PARITY(__PARITY__) (((__PARITY__) == IRDA_PARITY_NONE) || \
+                                    ((__PARITY__) == IRDA_PARITY_EVEN) || \
+                                    ((__PARITY__) == IRDA_PARITY_ODD))
+								
+#define IS_IRDA_TX_RX_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(IRDA_MODE_TX_RX)))) == (uint32_t)0x00) && ((__MODE__) != (uint32_t)0x00))
+
+#define IS_IRDA_POWERMODE(__MODE__) (((__MODE__) == IRDA_POWERMODE_LOWPOWER) || \
+                                     ((__MODE__) == IRDA_POWERMODE_NORMAL))
+									 
+#define IS_IRDA_STATE(__STATE__) (((__STATE__) == IRDA_STATE_DISABLE) || \
+                                  ((__STATE__) == IRDA_STATE_ENABLE))
+								  
+#define IS_IRDA_MODE(__STATE__)  (((__STATE__) == IRDA_MODE_DISABLE) || \
+                                  ((__STATE__) == IRDA_MODE_ENABLE))
+								  
+#define IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__)     (((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_DISABLE) || \
+                                               ((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_ENABLE))
+
+#define IS_IRDA_DMA_TX(__DMATX__)     (((__DMATX__) == IRDA_DMA_TX_DISABLE) || \
+                                       ((__DMATX__) == IRDA_DMA_TX_ENABLE))		
+
+#define IS_IRDA_DMA_RX(__DMARX__)     (((__DMARX__) == IRDA_DMA_RX_DISABLE) || \
+                                       ((__DMARX__) == IRDA_DMA_RX_ENABLE))
+
+#define IS_IRDA_REQUEST_PARAMETER(PARAM) (((PARAM) == IRDA_AUTOBAUD_REQUEST) || \
+                                          ((PARAM) == IRDA_SENDBREAK_REQUEST) || \
+                                          ((PARAM) == IRDA_MUTE_MODE_REQUEST) || \
+                                          ((PARAM) == IRDA_RXDATA_FLUSH_REQUEST) || \
+                                          ((PARAM) == IRDA_TXDATA_FLUSH_REQUEST))									   
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup IRDA_Private_Functions IRDA Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_irda_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,239 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_irda_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of IRDA HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *                               
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_IRDA_EX_H
+#define __STM32F7xx_HAL_IRDA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup IRDAEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDAEx_Extended_Exported_Constants IRDAEx Extended Exported Constants
+  * @{
+  */
+  
+/** @defgroup IRDAEx_Word_Length IRDAEx Word Length
+  * @{
+  */
+#define IRDA_WORDLENGTH_7B                  ((uint32_t)USART_CR1_M_1)
+#define IRDA_WORDLENGTH_8B                  ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M_0)
+/**
+  * @}
+  */
+  
+  
+/**
+  * @}
+  */  
+  
+/* Exported macro ------------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/** @defgroup IRDAEx_Private_Macros IRDAEx Private Macros
+  * @{
+  */
+/** @brief  Reports the IRDA clock source.
+  * @param  __HANDLE__: specifies the IRDA Handle
+  * @param  __CLOCKSOURCE__ : output variable
+  * @retval IRDA clocking source, written in __CLOCKSOURCE__.
+  */
+#define IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__)       \
+  do {                                                        \
+    if((__HANDLE__)->Instance == USART1)                      \
+    {                                                         \
+       switch(__HAL_RCC_GET_USART1_SOURCE())                  \
+       {                                                      \
+        case RCC_USART1CLKSOURCE_PCLK2:                       \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK2;         \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_SYSCLK:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK;        \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          break;                                              \
+       }                                                      \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART2)                 \
+    {                                                         \
+       switch(__HAL_RCC_GET_USART2_SOURCE())                  \
+       {                                                      \
+        case RCC_USART2CLKSOURCE_PCLK1:                       \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1;         \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_SYSCLK:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK;        \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          break;                                              \
+       }                                                      \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART3)                 \
+    {                                                         \
+       switch(__HAL_RCC_GET_USART3_SOURCE())                  \
+       {                                                      \
+        case RCC_USART3CLKSOURCE_PCLK1:                       \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1;         \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_SYSCLK:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK;        \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          break;                                              \
+       }                                                      \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART6)                 \
+    {                                                         \
+       switch(__HAL_RCC_GET_USART6_SOURCE())                  \
+       {                                                      \
+        case RCC_USART6CLKSOURCE_PCLK2:                       \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK2;         \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_SYSCLK:                      \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK;        \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          break;                                              \
+       }                                                      \
+    }                                                         \
+	} while(0)
+
+/** @brief  Reports the mask to apply to retrieve the received data
+  *         according to the word length and to the parity bits activation.
+  * @param  __HANDLE__: specifies the IRDA Handle
+  * @retval mask to apply to USART RDR register value.
+  */    
+#define IRDA_MASK_COMPUTATION(__HANDLE__)                       \
+  do {                                                                \
+  if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B)            \
+  {                                                                   \
+     if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE)               \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x01FF ;                                 \
+     }                                                                \
+     else                                                             \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x00FF ;                                 \
+     }                                                                \
+  }                                                                   \
+  else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B)       \
+  {                                                                   \
+     if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE)               \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x00FF ;                                 \
+     }                                                                \
+     else                                                             \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x007F ;                                 \
+     }                                                                \
+  }                                                                   \
+  else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_7B)       \
+  {                                                                   \
+     if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE)               \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x007F ;                                 \
+     }                                                                \
+     else                                                             \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x003F ;                                 \
+     }                                                                \
+  }                                                                   \
+} while(0)
+
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_7B) || \
+                                     ((LENGTH) == IRDA_WORDLENGTH_8B) || \
+                                     ((LENGTH) == IRDA_WORDLENGTH_9B))
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_IRDA_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_iwdg.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,426 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_iwdg.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   IWDG HAL module driver.
+  *    
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Independent Watchdog (IWDG) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State functions
+  *         
+  @verbatim
+  ==============================================================================
+                    ##### IWDG Generic features #####
+  ==============================================================================
+    [..] 
+    (+) The IWDG can be started by either software or hardware (configurable
+         through option byte).
+
+    (+) The IWDG is clocked by its own dedicated Low-Speed clock (LSI) and
+         thus stays active even if the main clock fails.
+         Once the IWDG is started, the LSI is forced ON and cannot be disabled
+         (LSI cannot be disabled too), and the counter starts counting down from
+         the reset value of 0xFFF. When it reaches the end of count value (0x000)
+         a system reset is generated.
+
+    (+) The IWDG counter should be refreshed at regular intervals, otherwise the
+         watchdog generates an MCU reset when the counter reaches 0.
+
+    (+) The IWDG is implemented in the VDD voltage domain that is still functional
+         in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY).
+         IWDGRST flag in RCC_CSR register can be used to inform when an IWDG
+         reset occurs.
+
+    [..] Min-max timeout value @32KHz (LSI): ~125us / ~32.7s
+         The IWDG timeout may vary due to LSI frequency dispersion. STM32L4xx
+         devices provide the capability to measure the LSI frequency (LSI clock
+         connected internally to TIM16 CH1 input capture). The measured value
+         can be used to have an IWDG timeout with an acceptable accuracy.
+
+
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+    If Window option is disabled
+    
+      (+) Use IWDG using HAL_IWDG_Init() function to :
+         (++) Enable write access to IWDG_PR, IWDG_RLR.
+         (++) Configure the IWDG prescaler, counter reload value.
+              This reload value will be loaded in the IWDG counter each time the counter
+              is reloaded, then the IWDG will start counting down from this value.
+      (+) Use IWDG using HAL_IWDG_Start() function to :
+         (++) Reload IWDG counter with value defined in the IWDG_RLR register.
+         (++) Start the IWDG, when the IWDG is used in software mode (no need 
+              to enable the LSI, it will be enabled by hardware).
+      (+) Then the application program must refresh the IWDG counter at regular
+          intervals during normal operation to prevent an MCU reset, using
+          HAL_IWDG_Refresh() function.
+    [..] 
+    if Window option is enabled:
+      
+      (+) Use IWDG using HAL_IWDG_Start() function to enable IWDG downcounter
+      (+) Use IWDG using HAL_IWDG_Init() function to :
+         (++) Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+         (++) Configure the IWDG prescaler, reload value and window value.
+      (+) Then the application program must refresh the IWDG counter at regular
+          intervals during normal operation to prevent an MCU reset, using
+          HAL_IWDG_Refresh() function.
+
+     *** IWDG HAL driver macros list ***
+     ====================================
+     [..]
+       Below the list of most used macros in IWDG HAL driver.
+       
+      (+) __HAL_IWDG_START: Enable the IWDG peripheral
+      (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in the reload register    
+      (+) __HAL_IWDG_GET_FLAG: Get the selected IWDG's flag status
+      (+) IWDG_ENABLE_WRITE_ACCESS : Enable write access to IWDG_PR and IWDG_RLR registers
+      (+) IWDG_DISABLE_WRITE_ACCESS : Disable write access to IWDG_PR and IWDG_RLR registers
+            
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup IWDG IWDG HAL module driver
+  * @brief IWDG HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup IWDG_Private_Defines IWDG Private Defines
+  * @{
+  */
+
+#define HAL_IWDG_DEFAULT_TIMEOUT (uint32_t)1000
+
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup IWDG_Exported_Functions IWDG Exported Functions
+  * @{
+  */
+
+/** @defgroup IWDG_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions.
+ *
+@verbatim
+ ===============================================================================
+          ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the IWDG according to the specified parameters
+          in the IWDG_InitTypeDef and create the associated handle
+      (+) Manage Window option
+      (+) Initialize the IWDG MSP
+      (+) DeInitialize IWDG MSP 
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the IWDG according to the specified
+  *         parameters in the IWDG_InitTypeDef and creates the associated handle.
+  * @param  hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+  *                the configuration information for the specified IWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the IWDG handle allocation */
+  if(hiwdg == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler));
+  assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload));
+  assert_param(IS_IWDG_WINDOW(hiwdg->Init.Window));
+
+  /* Check pending flag, if previous update not done, return error */
+  if((__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_PVU) != RESET)
+     &&(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_RVU) != RESET)
+     &&(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_WVU) != RESET))
+  {
+    return HAL_ERROR;
+  }
+
+  if(hiwdg->State == HAL_IWDG_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hiwdg->Lock = HAL_UNLOCKED;
+
+    /* Init the low level hardware */
+    HAL_IWDG_MspInit(hiwdg);
+  }
+
+  /* Change IWDG peripheral state */
+  hiwdg->State = HAL_IWDG_STATE_BUSY;
+
+  /* Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers */
+  /* by writing 0x00005555 in KR */
+  IWDG_ENABLE_WRITE_ACCESS(hiwdg);
+
+  /* Write to IWDG registers the IWDG_Prescaler & IWDG_Reload values to work with */
+  MODIFY_REG(hiwdg->Instance->PR, (uint32_t)IWDG_PR_PR, hiwdg->Init.Prescaler);
+  MODIFY_REG(hiwdg->Instance->RLR, (uint32_t)IWDG_RLR_RL, hiwdg->Init.Reload);
+
+  /* check if window option is enabled */
+  if (((hiwdg->Init.Window) != IWDG_WINDOW_DISABLE) || ((hiwdg->Instance->WINR) != IWDG_WINDOW_DISABLE))
+  {
+    tickstart = HAL_GetTick();
+
+     /* Wait for register to be updated */
+    while((uint32_t)(hiwdg->Instance->SR) != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > HAL_IWDG_DEFAULT_TIMEOUT)
+      {
+        /* Set IWDG state */
+        hiwdg->State = HAL_IWDG_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+
+    /* Write to IWDG WINR the IWDG_Window value to compare with */
+    MODIFY_REG(hiwdg->Instance->WINR, (uint32_t)IWDG_WINR_WIN, hiwdg->Init.Window);
+  }
+
+  /* Change IWDG peripheral state */
+  hiwdg->State = HAL_IWDG_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the IWDG MSP.
+  * @param  hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+  *                the configuration information for the specified IWDG module.
+  * @retval None
+  */
+__weak void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hiwdg);
+  
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_IWDG_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions  
+ *  @brief   IO operation functions  
+ *
+@verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Start the IWDG.
+      (+) Refresh the IWDG.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the IWDG.
+  * @param  hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+  *                the configuration information for the specified IWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg)
+{
+  uint32_t tickstart = 0;
+
+  /* Process locked */
+  __HAL_LOCK(hiwdg); 
+
+    /* Change IWDG peripheral state */
+  hiwdg->State = HAL_IWDG_STATE_BUSY;
+
+  /* Reload IWDG counter with value defined in the RLR register */
+  if ((hiwdg->Init.Window) == IWDG_WINDOW_DISABLE)
+  {
+    __HAL_IWDG_RELOAD_COUNTER(hiwdg);
+  }
+
+  /* Start the IWDG peripheral */
+  __HAL_IWDG_START(hiwdg);
+
+  tickstart = HAL_GetTick();
+
+  /* Wait until PVU, RVU, WVU flag are RESET */
+  while( (__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_PVU) != RESET)
+         &&(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_RVU) != RESET)
+         &&(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_WVU) != RESET) )
+  {
+    
+    if((HAL_GetTick() - tickstart ) > HAL_IWDG_DEFAULT_TIMEOUT)
+    {
+      /* Set IWDG state */
+      hiwdg->State = HAL_IWDG_STATE_TIMEOUT;
+      
+      /* Process unlocked */
+      __HAL_UNLOCK(hiwdg);
+      
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Change IWDG peripheral state */
+  hiwdg->State = HAL_IWDG_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hiwdg);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Refreshes the IWDG.
+  * @param  hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+  *                the configuration information for the specified IWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg)
+{
+  uint32_t tickstart = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hiwdg);
+
+    /* Change IWDG peripheral state */
+  hiwdg->State = HAL_IWDG_STATE_BUSY;
+
+  tickstart = HAL_GetTick();
+
+  /* Wait until RVU flag is RESET */
+  while(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_RVU) != RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > HAL_IWDG_DEFAULT_TIMEOUT)
+    {
+      /* Set IWDG state */
+      hiwdg->State = HAL_IWDG_STATE_TIMEOUT;
+
+       /* Process unlocked */
+      __HAL_UNLOCK(hiwdg);
+
+      return HAL_TIMEOUT;
+    }
+  }
+
+  /* Reload IWDG counter with value defined in the reload register */
+  __HAL_IWDG_RELOAD_COUNTER(hiwdg);
+
+  /* Change IWDG peripheral state */
+  hiwdg->State = HAL_IWDG_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hiwdg);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Exported_Functions_Group3 Peripheral State functions 
+ *  @brief    Peripheral State functions.
+ *
+@verbatim
+ ===============================================================================
+                      ##### Peripheral State functions #####
+ ===============================================================================
+    [..]
+    This subsection permits to get in run-time the status of the peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the IWDG state.
+  * @param  hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
+  *                the configuration information for the specified IWDG module.
+  * @retval HAL state
+  */
+HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg)
+{
+  return hiwdg->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_IWDG_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_iwdg.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,308 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_iwdg.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of IWDG HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_IWDG_H
+#define __STM32F7xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup IWDG
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Types IWDG Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  IWDG HAL State Structure definition
+  */
+typedef enum
+{
+  HAL_IWDG_STATE_RESET     = 0x00,  /*!< IWDG not yet initialized or disabled */
+  HAL_IWDG_STATE_READY     = 0x01,  /*!< IWDG initialized and ready for use   */
+  HAL_IWDG_STATE_BUSY      = 0x02,  /*!< IWDG internal process is ongoing     */
+  HAL_IWDG_STATE_TIMEOUT   = 0x03,  /*!< IWDG timeout state                   */
+  HAL_IWDG_STATE_ERROR     = 0x04   /*!< IWDG error state                     */
+
+}HAL_IWDG_StateTypeDef;
+
+/** 
+  * @brief  IWDG Init structure definition
+  */
+typedef struct
+{
+  uint32_t Prescaler;  /*!< Select the prescaler of the IWDG.
+                            This parameter can be a value of @ref IWDG_Prescaler */
+
+  uint32_t Reload;     /*!< Specifies the IWDG down-counter reload value.
+                            This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+  uint32_t Window;     /*!< Specifies the window value to be compared to the down-counter.
+                            This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+} IWDG_InitTypeDef;
+
+/** 
+  * @brief  IWDG Handle Structure definition  
+  */
+typedef struct
+{
+  IWDG_TypeDef                 *Instance;  /*!< Register base address    */
+
+  IWDG_InitTypeDef             Init;       /*!< IWDG required parameters */
+
+  HAL_LockTypeDef              Lock;      /*!< IWDG Locking object      */
+
+  __IO HAL_IWDG_StateTypeDef   State;      /*!< IWDG communication state */
+
+}IWDG_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
+  * @{
+  */
+
+/** @defgroup IWDG_Prescaler IWDG Prescaler
+  * @{
+  */
+#define IWDG_PRESCALER_4                ((uint8_t)0x00)                            /*!< IWDG prescaler set to 4   */
+#define IWDG_PRESCALER_8                ((uint8_t)(IWDG_PR_PR_0))                  /*!< IWDG prescaler set to 8   */
+#define IWDG_PRESCALER_16               ((uint8_t)(IWDG_PR_PR_1))                  /*!< IWDG prescaler set to 16  */
+#define IWDG_PRESCALER_32               ((uint8_t)(IWDG_PR_PR_1 | IWDG_PR_PR_0))   /*!< IWDG prescaler set to 32  */
+#define IWDG_PRESCALER_64               ((uint8_t)(IWDG_PR_PR_2))                  /*!< IWDG prescaler set to 64  */
+#define IWDG_PRESCALER_128              ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_0))   /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256              ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_1))   /*!< IWDG prescaler set to 256 */
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Window IWDG Window
+  * @{
+  */
+#define IWDG_WINDOW_DISABLE             ((uint32_t)0x00000FFF)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
+  * @{
+  */
+
+/** @brief Reset IWDG handle state
+  * @param  __HANDLE__: IWDG handle.
+  * @retval None
+  */
+#define __HAL_IWDG_RESET_HANDLE_STATE(__HANDLE__)   ((__HANDLE__)->State = HAL_IWDG_STATE_RESET)
+
+/**
+  * @brief  Enables the IWDG peripheral.
+  * @param  __HANDLE__: IWDG handle
+  * @retval None
+  */
+#define __HAL_IWDG_START(__HANDLE__)                WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE)
+
+/**
+  * @brief  Reloads IWDG counter with value defined in the reload register
+  *         (write access to IWDG_PR and IWDG_RLR registers disabled).
+  * @param  __HANDLE__: IWDG handle
+  * @retval None
+  */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__)       WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD)
+
+/**
+  * @brief  Gets the selected IWDG's flag status.
+  * @param  __HANDLE__: IWDG handle
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg IWDG_FLAG_PVU:  Watchdog counter reload value update flag
+  *            @arg IWDG_FLAG_RVU:  Watchdog counter prescaler value flag
+  *            @arg IWDG_FLAG_WVU:  Watchdog counter window value flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE) .
+  */
+#define __HAL_IWDG_GET_FLAG(__HANDLE__, __FLAG__)   (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup IWDG_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup IWDG_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+void              HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg);
+/**
+  * @}
+  */
+
+/** @addtogroup IWDG_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+/**
+  * @}
+  */
+
+/** @addtogroup IWDG_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  ************************************************/
+HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup IWDG_Private_Defines
+  * @{
+  */
+/**
+  * @brief  IWDG Key Register BitMask
+  */
+#define IWDG_KEY_RELOAD                 ((uint32_t)0x0000AAAA)  /*!< IWDG Reload Counter Enable   */
+#define IWDG_KEY_ENABLE                 ((uint32_t)0x0000CCCC)  /*!< IWDG Peripheral Enable       */
+#define IWDG_KEY_WRITE_ACCESS_ENABLE    ((uint32_t)0x00005555)  /*!< IWDG KR Write Access Enable  */
+#define IWDG_KEY_WRITE_ACCESS_DISABLE   ((uint32_t)0x00000000)  /*!< IWDG KR Write Access Disable */
+
+/**
+  * @brief  IWDG Flag definition
+  */
+#define IWDG_FLAG_PVU                   ((uint32_t)IWDG_SR_PVU)  /*!< Watchdog counter prescaler value update flag */
+#define IWDG_FLAG_RVU                   ((uint32_t)IWDG_SR_RVU)  /*!< Watchdog counter reload value update flag    */
+#define IWDG_FLAG_WVU                   ((uint32_t)IWDG_SR_WVU)  /*!< Watchdog counter window value update flag    */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup IWDG_Private_Macro IWDG Private Macros
+  * @{
+  */
+/**
+  * @brief  Enables write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+  * @param  __HANDLE__: IWDG handle
+  * @retval None
+  */
+#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__)  WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE)
+
+/**
+  * @brief  Disables write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+  * @param  __HANDLE__: IWDG handle
+  * @retval None
+  */
+#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE)
+
+/**
+  * @brief  Check IWDG prescaler value.
+  * @param  __PRESCALER__: IWDG prescaler value
+  * @retval None
+  */
+#define IS_IWDG_PRESCALER(__PRESCALER__)      (((__PRESCALER__) == IWDG_PRESCALER_4)  || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_8)  || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_16) || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_32) || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_64) || \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_128)|| \
+                                               ((__PRESCALER__) == IWDG_PRESCALER_256))
+
+/**
+  * @brief  Check IWDG reload value.
+  * @param  __RELOAD__: IWDG reload value
+  * @retval None
+  */
+#define IS_IWDG_RELOAD(__RELOAD__)            ((__RELOAD__) <= 0xFFF)
+
+/**
+  * @brief  Check IWDG window value.
+  * @param  __WINDOW__: IWDG window value
+  * @retval None
+  */
+#define IS_IWDG_WINDOW(__WINDOW__)            ((__WINDOW__) <= 0xFFF)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_lptim.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1679 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_lptim.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   LPTIM HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Low Power Timer (LPTIM) peripheral:
+  *           + Initialization and de-initialization functions.
+  *           + Start/Stop operation functions in polling mode.
+  *           + Start/Stop operation functions in interrupt mode.
+  *           + Reading operation functions.
+  *           + Peripheral State functions.
+  *         
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The LPTIM HAL driver can be used as follows:
+
+      (#)Initialize the LPTIM low level resources by implementing the
+        HAL_LPTIM_MspInit():
+         (##) Enable the LPTIM interface clock using __LPTIMx_CLK_ENABLE().
+         (##) In case of using interrupts (e.g. HAL_LPTIM_PWM_Start_IT()):
+             (+) Configure the LPTIM interrupt priority using HAL_NVIC_SetPriority().
+             (+) Enable the LPTIM IRQ handler using HAL_NVIC_EnableIRQ().
+             (+) In LPTIM IRQ handler, call HAL_LPTIM_IRQHandler().
+    
+      (#)Initialize the LPTIM HAL using HAL_LPTIM_Init(). This function
+         configures mainly:
+         (##) The instance: LPTIM1.
+         (##) Clock: the counter clock.
+                 - Source   : it can be either the ULPTIM input (IN1) or one of
+                              the internal clock; (APB, LSE, LSI or MSI).
+                 - Prescaler: select the clock divider.
+         (##)  UltraLowPowerClock : To be used only if the ULPTIM is selected
+               as counter clock source.
+                 - Polarity:   polarity of the active edge for the counter unit
+                               if the ULPTIM input is selected.
+                 - SampleTime: clock sampling time to configure the clock glitch
+                               filter.              
+         (##) Trigger: How the counter start.
+                 - Source: trigger can be software or one of the hardware triggers.
+                 - ActiveEdge : only for hardware trigger.
+                 - SampleTime : trigger sampling time to configure the trigger
+                                glitch filter.
+         (##) OutputPolarity : 2 opposite polarities are possibles.
+         (##) UpdateMode: specifies whether the update of the autoreload and
+              the compare values is done immediately or after the end of current
+              period.   
+    
+      (#)Six modes are available:
+      
+         (##) PWM Mode: To generate a PWM signal with specified period and pulse,
+         call HAL_LPTIM_PWM_Start() or HAL_LPTIM_PWM_Start_IT() for interruption
+         mode.
+         
+         (##) One Pulse Mode: To generate pulse with specified width in response
+         to a stimulus, call HAL_LPTIM_OnePulse_Start() or
+         HAL_LPTIM_OnePulse_Start_IT() for interruption mode.
+         
+         (##) Set once Mode: In this mode, the output changes the level (from
+         low level to high level if the output polarity is configured high, else
+         the opposite) when a compare match occurs. To start this mode, call 
+         HAL_LPTIM_SetOnce_Start() or HAL_LPTIM_SetOnce_Start_IT() for
+         interruption mode.
+         
+         (##) Encoder Mode: To use the encoder interface call
+         HAL_LPTIM_Encoder_Start() or HAL_LPTIM_Encoder_Start_IT() for 
+         interruption mode.
+         
+         (##) Time out Mode: an active edge on one selected trigger input rests
+         the counter. The first trigger event will start the timer, any
+         successive trigger event will reset the counter and the timer will
+         restart. To start this mode call HAL_LPTIM_TimeOut_Start_IT() or 
+         HAL_LPTIM_TimeOut_Start_IT() for interruption mode.
+         
+         (##) Counter Mode: counter can be used to count external events on
+         the LPTIM Input1 or it can be used to count internal clock cycles.
+         To start this mode, call HAL_LPTIM_Counter_Start() or 
+         HAL_LPTIM_Counter_Start_IT() for interruption mode.             
+
+    
+      (#) User can stop any process by calling the corresponding API:
+          HAL_LPTIM_Xxx_Stop() or HAL_LPTIM_Xxx_Stop_IT() if the process is
+          already started in interruption mode.
+         
+       (#)Call HAL_LPTIM_DeInit() to deinitialize the LPTIM peripheral.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup LPTIM LPTIM
+  * @brief LPTIM HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+/* Private types -------------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Types LPTIM Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+  
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Defines LPTIM Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup LPTIM_Private_Variables LPTIM Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+ 
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup LPTIM_Private_Constants LPTIM Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+  
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup LPTIM_Private_Macros LPTIM Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup LPTIM_Private_Functions_Prototypes LPTIM Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup LPTIM_Private_Functions LPTIM Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+  
+/* Exported functions ---------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions
+  * @{
+  */
+
+/** @defgroup LPTIM_Group1 Initialization/de-initialization functions 
+ *  @brief    Initialization and Configuration functions. 
+ *
+@verbatim    
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the LPTIM according to the specified parameters in the
+          LPTIM_InitTypeDef and creates the associated handle.
+      (+) DeInitialize the LPTIM peripheral.
+      (+) Initialize the LPTIM MSP.
+      (+) DeInitialize LPTIM MSP. 
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the LPTIM according to the specified parameters in the
+  *         LPTIM_InitTypeDef and creates the associated handle.
+  * @param  hlptim: LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim)
+{
+  uint32_t tmpcfgr = 0;
+
+  /* Check the LPTIM handle allocation */
+  if(hlptim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  
+  assert_param(IS_LPTIM_CLOCK_SOURCE(hlptim->Init.Clock.Source));
+  assert_param(IS_LPTIM_CLOCK_PRESCALER(hlptim->Init.Clock.Prescaler));  
+  if ((hlptim->Init.Clock.Source) ==  LPTIM_CLOCKSOURCE_ULPTIM)
+  {
+    assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
+    assert_param(IS_LPTIM_CLOCK_SAMPLE_TIME(hlptim->Init.UltraLowPowerClock.SampleTime));
+  }  
+  assert_param(IS_LPTIM_TRG_SOURCE(hlptim->Init.Trigger.Source));
+  if ((hlptim->Init.Trigger.Source) !=  LPTIM_TRIGSOURCE_SOFTWARE)
+  {
+    assert_param(IS_LPTIM_TRIG_SAMPLE_TIME(hlptim->Init.Trigger.SampleTime));
+    assert_param(IS_LPTIM_EXT_TRG_POLARITY(hlptim->Init.Trigger.ActiveEdge));
+  }  
+  assert_param(IS_LPTIM_OUTPUT_POLARITY(hlptim->Init.OutputPolarity));  
+  assert_param(IS_LPTIM_UPDATE_MODE(hlptim->Init.UpdateMode));
+  assert_param(IS_LPTIM_COUNTER_SOURCE(hlptim->Init.CounterSource));
+  
+  if(hlptim->State == HAL_LPTIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hlptim->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_LPTIM_MspInit(hlptim);
+  }
+  
+  /* Change the LPTIM state */
+  hlptim->State = HAL_LPTIM_STATE_BUSY;
+  
+  /* Get the LPTIMx CFGR value */
+  tmpcfgr = hlptim->Instance->CFGR;
+  
+  if ((hlptim->Init.Clock.Source) ==  LPTIM_CLOCKSOURCE_ULPTIM)
+  {
+    tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKPOL | LPTIM_CFGR_CKFLT));
+  }
+  if ((hlptim->Init.Trigger.Source) !=  LPTIM_TRIGSOURCE_SOFTWARE)
+  {
+    tmpcfgr &= (uint32_t)(~ (LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGSEL));
+  }
+    
+  /* Clear CKSEL, PRESC, TRIGEN, TRGFLT, WAVPOL, PRELOAD & COUNTMODE bits */
+  tmpcfgr &= (uint32_t)(~(LPTIM_CFGR_CKSEL | LPTIM_CFGR_TRIGEN | LPTIM_CFGR_PRELOAD |
+                          LPTIM_CFGR_WAVPOL | LPTIM_CFGR_PRESC | LPTIM_CFGR_COUNTMODE ));
+  
+  /* Set initialization parameters */
+  tmpcfgr |= (hlptim->Init.Clock.Source    |
+              hlptim->Init.Clock.Prescaler |
+              hlptim->Init.OutputPolarity  |
+              hlptim->Init.UpdateMode      |
+              hlptim->Init.CounterSource);
+  
+  if ((hlptim->Init.Clock.Source) ==  LPTIM_CLOCKSOURCE_ULPTIM)
+  {
+    tmpcfgr |=  (hlptim->Init.UltraLowPowerClock.Polarity |
+                hlptim->Init.UltraLowPowerClock.SampleTime);
+  } 
+  
+  if ((hlptim->Init.Trigger.Source) !=  LPTIM_TRIGSOURCE_SOFTWARE)
+  {
+    /* Enable External trigger and set the trigger source */
+    tmpcfgr |= (hlptim->Init.Trigger.Source     |
+                hlptim->Init.Trigger.ActiveEdge |
+                hlptim->Init.Trigger.SampleTime);
+  }
+  
+  /* Write to LPTIMx CFGR */
+  hlptim->Instance->CFGR = tmpcfgr;
+
+  /* Change the LPTIM state */
+  hlptim->State = HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the LPTIM peripheral. 
+  * @param  hlptim: LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the LPTIM handle allocation */
+  if(hlptim == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Change the LPTIM state */
+  hlptim->State = HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the LPTIM Peripheral Clock */
+  __HAL_LPTIM_DISABLE(hlptim);
+  
+  /* DeInit the low level hardware: CLOCK, NVIC.*/
+  HAL_LPTIM_MspDeInit(hlptim);
+  
+  /* Change the LPTIM state */
+  hlptim->State = HAL_LPTIM_STATE_RESET;
+  
+  /* Release Lock */
+  __HAL_UNLOCK(hlptim);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the LPTIM MSP.
+  * @param  hlptim: LPTIM handle
+  * @retval None
+  */
+__weak void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hlptim);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LPTIM_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes LPTIM MSP.
+  * @param  hlptim: LPTIM handle
+  * @retval None
+  */
+__weak void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hlptim);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LPTIM_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Group2 LPTIM Start-Stop operation functions 
+ *  @brief   Start-Stop operation functions. 
+ *
+@verbatim   
+  ==============================================================================
+                ##### LPTIM Start Stop operation functions #####
+  ==============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Start the PWM mode.
+      (+) Stop the PWM mode.
+      (+) Start the One pulse mode.
+      (+) Stop the One pulse mode.
+      (+) Start the Set once mode.
+      (+) Stop the Set once mode.
+      (+) Start the Encoder mode.
+      (+) Stop the Encoder mode.
+      (+) Start the Timeout mode.
+      (+) Stop the Timeout mode.      
+      (+) Start the Counter mode.
+      (+) Stop the Counter mode.
+      
+
+@endverbatim
+  * @{
+  */
+    
+/**
+  * @brief  Starts the LPTIM PWM generation.
+  * @param  hlptim : LPTIM handle
+  * @param  Period : Specifies the Autoreload value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @param  Pulse : Specifies the compare value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  assert_param(IS_LPTIM_PERIOD(Period));
+  assert_param(IS_LPTIM_PULSE(Pulse));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+ 
+  /* Reset WAVE bit to set PWM mode */
+  hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
+  
+  /* Enable the Peripheral */
+  __HAL_LPTIM_ENABLE(hlptim);
+  
+  /* Load the period value in the autoreload register */
+  __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+  
+  /* Load the pulse value in the compare register */
+  __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+  
+  /* Start timer in continuous mode */
+  __HAL_LPTIM_START_CONTINUOUS(hlptim);
+    
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the LPTIM PWM generation.
+  * @param  hlptim : LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_LPTIM_DISABLE(hlptim);
+
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the LPTIM PWM generation in interrupt mode.
+  * @param  hlptim : LPTIM handle
+  * @param  Period : Specifies the Autoreload value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF
+  * @param  Pulse : Specifies the compare value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  assert_param(IS_LPTIM_PERIOD(Period));
+  assert_param(IS_LPTIM_PULSE(Pulse));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+ 
+  /* Reset WAVE bit to set PWM mode */
+  hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
+  
+  /* Enable Autoreload write complete interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
+  
+  /* Enable Compare write complete interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK);
+  
+  /* Enable Autoreload match interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
+  
+  /* Enable Compare match interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
+  
+  /* If external trigger source is used, then enable external trigger interrupt */
+  if ((hlptim->Init.Trigger.Source) !=  LPTIM_TRIGSOURCE_SOFTWARE)
+  {
+    /* Enable external trigger interrupt */
+    __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+  }  
+  
+  /* Enable the Peripheral */
+  __HAL_LPTIM_ENABLE(hlptim);
+  
+  /* Load the period value in the autoreload register */
+  __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+  
+  /* Load the pulse value in the compare register */
+  __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+  
+  /* Start timer in continuous mode */
+  __HAL_LPTIM_START_CONTINUOUS(hlptim);
+    
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the LPTIM PWM generation in interrupt mode.
+  * @param  hlptim : LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_LPTIM_DISABLE(hlptim);
+  
+    /* Disable Autoreload write complete interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
+  
+  /* Disable Compare write complete interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK);
+  
+  /* Disable Autoreload match interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
+  
+  /* Disable Compare match interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
+  
+  /* If external trigger source is used, then disable external trigger interrupt */
+  if ((hlptim->Init.Trigger.Source) !=  LPTIM_TRIGSOURCE_SOFTWARE)
+  {
+    /* Disable external trigger interrupt */
+    __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+  }  
+
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the LPTIM One pulse generation.
+  * @param  hlptim : LPTIM handle
+  * @param  Period : Specifies the Autoreload value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @param  Pulse : Specifies the compare value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  assert_param(IS_LPTIM_PERIOD(Period));
+  assert_param(IS_LPTIM_PULSE(Pulse));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Reset WAVE bit to set one pulse mode */
+  hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
+  
+  /* Enable the Peripheral */
+  __HAL_LPTIM_ENABLE(hlptim);
+  
+  /* Load the period value in the autoreload register */
+  __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+  
+  /* Load the pulse value in the compare register */
+  __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+  
+  /* Start timer in continuous mode */
+  __HAL_LPTIM_START_SINGLE(hlptim);
+    
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the LPTIM One pulse generation.
+  * @param  hlptim : LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_LPTIM_DISABLE(hlptim);
+
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the LPTIM One pulse generation in interrupt mode.
+  * @param  hlptim : LPTIM handle
+  * @param  Period : Specifies the Autoreload value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @param  Pulse : Specifies the compare value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  assert_param(IS_LPTIM_PERIOD(Period));
+  assert_param(IS_LPTIM_PULSE(Pulse));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Reset WAVE bit to set one pulse mode */
+  hlptim->Instance->CFGR &= ~LPTIM_CFGR_WAVE;
+  
+  /* Enable Autoreload write complete interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
+  
+  /* Enable Compare write complete interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK);
+  
+  /* Enable Autoreload match interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
+  
+  /* Enable Compare match interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
+  
+  /* If external trigger source is used, then enable external trigger interrupt */
+  if ((hlptim->Init.Trigger.Source) !=  LPTIM_TRIGSOURCE_SOFTWARE)
+  {
+    /* Enable external trigger interrupt */
+    __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+  }
+  
+  /* Enable the Peripheral */
+  __HAL_LPTIM_ENABLE(hlptim);
+  
+  /* Load the period value in the autoreload register */
+  __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+  
+  /* Load the pulse value in the compare register */
+  __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+  
+  /* Start timer in continuous mode */
+  __HAL_LPTIM_START_SINGLE(hlptim);
+    
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the LPTIM One pulse generation in interrupt mode.
+  * @param  hlptim : LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_LPTIM_DISABLE(hlptim);
+  
+  /* Disable Autoreload write complete interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
+  
+  /* Disable Compare write complete interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK);
+  
+  /* Disable Autoreload match interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
+  
+  /* Disable Compare match interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
+  
+  /* If external trigger source is used, then disable external trigger interrupt */
+  if ((hlptim->Init.Trigger.Source) !=  LPTIM_TRIGSOURCE_SOFTWARE)
+  {
+    /* Disable external trigger interrupt */
+    __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+  }
+  
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the LPTIM in Set once mode.
+  * @param  hlptim : LPTIM handle
+  * @param  Period : Specifies the Autoreload value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @param  Pulse : Specifies the compare value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  assert_param(IS_LPTIM_PERIOD(Period));
+  assert_param(IS_LPTIM_PULSE(Pulse));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Set WAVE bit to enable the set once mode */
+  hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE;
+  
+  /* Enable the Peripheral */
+  __HAL_LPTIM_ENABLE(hlptim);
+  
+  /* Load the period value in the autoreload register */
+  __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+  
+  /* Load the pulse value in the compare register */
+  __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+  
+  /* Start timer in continuous mode */
+  __HAL_LPTIM_START_SINGLE(hlptim);
+    
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the LPTIM Set once mode.
+  * @param  hlptim : LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_LPTIM_DISABLE(hlptim);
+
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the LPTIM Set once mode in interrupt mode.
+  * @param  hlptim : LPTIM handle
+  * @param  Period : Specifies the Autoreload value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @param  Pulse : Specifies the compare value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  assert_param(IS_LPTIM_PERIOD(Period));
+  assert_param(IS_LPTIM_PULSE(Pulse));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Set WAVE bit to enable the set once mode */
+  hlptim->Instance->CFGR |= LPTIM_CFGR_WAVE;
+  
+  /* Enable Autoreload write complete interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
+  
+  /* Enable Compare write complete interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPOK);
+  
+  /* Enable Autoreload match interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
+  
+  /* Enable Compare match interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
+  
+  /* If external trigger source is used, then enable external trigger interrupt */
+  if ((hlptim->Init.Trigger.Source) !=  LPTIM_TRIGSOURCE_SOFTWARE)
+  {
+    /* Enable external trigger interrupt */
+    __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+  }  
+  
+  /* Enable the Peripheral */
+  __HAL_LPTIM_ENABLE(hlptim);
+  
+  /* Load the period value in the autoreload register */
+  __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+  
+  /* Load the pulse value in the compare register */
+  __HAL_LPTIM_COMPARE_SET(hlptim, Pulse);
+  
+  /* Start timer in continuous mode */
+  __HAL_LPTIM_START_SINGLE(hlptim);
+    
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the LPTIM Set once mode in interrupt mode.
+  * @param  hlptim : LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_LPTIM_DISABLE(hlptim);
+
+  /* Disable Autoreload write complete interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
+  
+  /* Disable Compare write complete interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPOK);
+  
+  /* Disable Autoreload match interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
+  
+  /* Disable Compare match interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
+  
+  /* If external trigger source is used, then disable external trigger interrupt */
+  if ((hlptim->Init.Trigger.Source) !=  LPTIM_TRIGSOURCE_SOFTWARE)
+  {
+    /* Disable external trigger interrupt */
+    __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_EXTTRIG);
+  } 
+  
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the Encoder interface.
+  * @param  hlptim : LPTIM handle
+  * @param  Period : Specifies the Autoreload value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
+{
+  uint32_t tmpcfgr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  assert_param(IS_LPTIM_PERIOD(Period));
+  assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC);
+  assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1);
+  assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
+
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+  /* Get the LPTIMx CFGR value */
+  tmpcfgr = hlptim->Instance->CFGR;
+
+  /* Clear CKPOL bits */
+  tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL);
+
+  /* Set Input polarity */
+  tmpcfgr |=  hlptim->Init.UltraLowPowerClock.Polarity;
+
+  /* Write to LPTIMx CFGR */
+  hlptim->Instance->CFGR = tmpcfgr;
+
+  /* Set ENC bit to enable the encoder interface */
+  hlptim->Instance->CFGR |= LPTIM_CFGR_ENC;
+
+  /* Enable the Peripheral */
+  __HAL_LPTIM_ENABLE(hlptim);
+
+  /* Load the period value in the autoreload register */
+  __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+  /* Start timer in continuous mode */
+  __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the Encoder interface.
+  * @param  hlptim : LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_LPTIM_DISABLE(hlptim);
+  
+  /* Reset ENC bit to disable the encoder interface */
+  hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC;
+  
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the Encoder interface in interrupt mode.
+  * @param  hlptim : LPTIM handle
+  * @param  Period : Specifies the Autoreload value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
+{
+  uint32_t tmpcfgr = 0;
+
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  assert_param(IS_LPTIM_PERIOD(Period));
+  assert_param(hlptim->Init.Clock.Source == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC);
+  assert_param(hlptim->Init.Clock.Prescaler == LPTIM_PRESCALER_DIV1);
+  assert_param(IS_LPTIM_CLOCK_POLARITY(hlptim->Init.UltraLowPowerClock.Polarity));
+
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+
+  /* Configure edge sensitivity for encoder mode */
+  /* Get the LPTIMx CFGR value */
+  tmpcfgr = hlptim->Instance->CFGR;
+
+  /* Clear CKPOL bits */
+  tmpcfgr &= (uint32_t)(~LPTIM_CFGR_CKPOL);
+
+  /* Set Input polarity */
+  tmpcfgr |=  hlptim->Init.UltraLowPowerClock.Polarity;
+
+  /* Write to LPTIMx CFGR */
+  hlptim->Instance->CFGR = tmpcfgr;
+
+  /* Set ENC bit to enable the encoder interface */
+  hlptim->Instance->CFGR |= LPTIM_CFGR_ENC;
+
+  /* Enable "switch to down direction" interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_DOWN);
+
+  /* Enable "switch to up direction" interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_UP);  
+
+  /* Enable the Peripheral */
+  __HAL_LPTIM_ENABLE(hlptim);
+
+  /* Load the period value in the autoreload register */
+  __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+
+  /* Start timer in continuous mode */
+  __HAL_LPTIM_START_CONTINUOUS(hlptim);
+
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the Encoder interface in interrupt mode.
+  * @param  hlptim : LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_LPTIM_DISABLE(hlptim);
+  
+  /* Reset ENC bit to disable the encoder interface */
+  hlptim->Instance->CFGR &= ~LPTIM_CFGR_ENC;
+  
+  /* Disable "switch to down direction" interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_DOWN);
+  
+  /* Disable "switch to up direction" interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_UP); 
+  
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the Timeout function. The first trigger event will start the
+  *         timer, any successive trigger event will reset the counter and
+  *         the timer restarts.
+  * @param  hlptim : LPTIM handle
+  * @param  Period : Specifies the Autoreload value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @param  Timeout : Specifies the TimeOut value to rest the counter.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  assert_param(IS_LPTIM_PERIOD(Period));
+  assert_param(IS_LPTIM_PULSE(Timeout));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+ 
+  /* Set TIMOUT bit to enable the timeout function */
+  hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT;
+  
+  /* Enable the Peripheral */
+  __HAL_LPTIM_ENABLE(hlptim);
+  
+  /* Load the period value in the autoreload register */
+  __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+  
+  /* Load the Timeout value in the compare register */
+  __HAL_LPTIM_COMPARE_SET(hlptim, Timeout);
+  
+  /* Start timer in continuous mode */
+  __HAL_LPTIM_START_CONTINUOUS(hlptim);
+    
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the Timeout function.
+  * @param  hlptim : LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_LPTIM_DISABLE(hlptim);
+  
+  /* Reset TIMOUT bit to enable the timeout function */
+  hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT;
+  
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the Timeout function in interrupt mode. The first trigger 
+  *         event will start the timer, any successive trigger event will reset
+  *         the counter and the timer restarts.
+  * @param  hlptim : LPTIM handle
+  * @param  Period : Specifies the Autoreload value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @param  Timeout : Specifies the TimeOut value to rest the counter.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  assert_param(IS_LPTIM_PERIOD(Period));
+  assert_param(IS_LPTIM_PULSE(Timeout));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+ 
+  /* Set TIMOUT bit to enable the timeout function */
+  hlptim->Instance->CFGR |= LPTIM_CFGR_TIMOUT;
+  
+  /* Enable Compare match interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_CMPM);
+  
+  /* Enable the Peripheral */
+  __HAL_LPTIM_ENABLE(hlptim);
+  
+  /* Load the period value in the autoreload register */
+  __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+  
+  /* Load the Timeout value in the compare register */
+  __HAL_LPTIM_COMPARE_SET(hlptim, Timeout);
+  
+  /* Start timer in continuous mode */
+  __HAL_LPTIM_START_CONTINUOUS(hlptim);
+    
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the Timeout function in interrupt mode.
+  * @param  hlptim : LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_LPTIM_DISABLE(hlptim);
+  
+  /* Reset TIMOUT bit to enable the timeout function */
+  hlptim->Instance->CFGR &= ~LPTIM_CFGR_TIMOUT;
+  
+  /* Disable Compare match interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_CMPM);
+  
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the Counter mode.
+  * @param  hlptim : LPTIM handle
+  * @param  Period : Specifies the Autoreload value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  assert_param(IS_LPTIM_PERIOD(Period));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */
+  if((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
+  {
+    /* Check if clock is prescaled */
+    assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler));
+    /* Set clock prescaler to 0 */
+    hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC;
+  }
+
+  /* Enable the Peripheral */
+  __HAL_LPTIM_ENABLE(hlptim);
+  
+  /* Load the period value in the autoreload register */
+  __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+  
+  /* Start timer in continuous mode */
+  __HAL_LPTIM_START_CONTINUOUS(hlptim);
+    
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the Counter mode.
+  * @param  hlptim : LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_LPTIM_DISABLE(hlptim);
+  
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the Counter mode in interrupt mode.
+  * @param  hlptim : LPTIM handle
+  * @param  Period : Specifies the Autoreload value.
+  *         This parameter must be a value between 0x0000 and 0xFFFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  assert_param(IS_LPTIM_PERIOD(Period));
+               
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* If clock source is not ULPTIM clock and counter source is external, then it must not be prescaled */
+  if((hlptim->Init.Clock.Source != LPTIM_CLOCKSOURCE_ULPTIM) && (hlptim->Init.CounterSource == LPTIM_COUNTERSOURCE_EXTERNAL))
+  {
+    /* Check if clock is prescaled */
+    assert_param(IS_LPTIM_CLOCK_PRESCALERDIV1(hlptim->Init.Clock.Prescaler));
+    /* Set clock prescaler to 0 */
+    hlptim->Instance->CFGR &= ~LPTIM_CFGR_PRESC;
+  }
+  
+  /* Enable Autoreload write complete interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARROK);
+  
+  /* Enable Autoreload match interrupt */
+  __HAL_LPTIM_ENABLE_IT(hlptim, LPTIM_IT_ARRM);
+  
+  /* Enable the Peripheral */
+  __HAL_LPTIM_ENABLE(hlptim);
+  
+  /* Load the period value in the autoreload register */
+  __HAL_LPTIM_AUTORELOAD_SET(hlptim, Period);
+  
+  /* Start timer in continuous mode */
+  __HAL_LPTIM_START_CONTINUOUS(hlptim);
+    
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the Counter mode in interrupt mode.
+  * @param  hlptim : LPTIM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  
+  /* Set the LPTIM state */
+  hlptim->State= HAL_LPTIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_LPTIM_DISABLE(hlptim);
+  
+  /* Disable Autoreload write complete interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARROK);
+  
+  /* Disable Autoreload match interrupt */
+  __HAL_LPTIM_DISABLE_IT(hlptim, LPTIM_IT_ARRM);
+  
+  /* Change the TIM state*/
+  hlptim->State= HAL_LPTIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Group3 LPTIM Read operation functions 
+ *  @brief  Read operation functions.
+ *
+@verbatim   
+  ==============================================================================
+                  ##### LPTIM Read operation functions #####
+  ==============================================================================  
+[..]  This section provides LPTIM Reading functions.
+      (+) Read the counter value.
+      (+) Read the period (Auto-reload) value.
+      (+) Read the pulse (Compare)value.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function returns the current counter value.
+  * @param  hlptim: LPTIM handle
+  * @retval Counter value.
+  */
+uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim)
+{
+    /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  
+  return (hlptim->Instance->CNT);
+}
+
+/**
+  * @brief  This function return the current Autoreload (Period) value.
+  * @param  hlptim: LPTIM handle
+  * @retval Autoreload value.
+  */
+uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim)
+{
+    /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  
+  return (hlptim->Instance->ARR);
+}
+
+/**
+  * @brief  This function return the current Compare (Pulse) value.
+  * @param  hlptim: LPTIM handle
+  * @retval Compare value.
+  */
+uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim)
+{
+    /* Check the parameters */
+  assert_param(IS_LPTIM_INSTANCE(hlptim->Instance));
+  
+  return (hlptim->Instance->CMP);
+}
+
+/**
+  * @}
+  */
+
+
+
+/** @defgroup LPTIM_Group4 LPTIM IRQ handler 
+ *  @brief  LPTIM  IRQ handler.
+ *
+@verbatim   
+  ==============================================================================
+                      ##### LPTIM IRQ handler  #####
+  ==============================================================================  
+[..]  This section provides LPTIM IRQ handler function.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  This function handles LPTIM interrupt request.
+  * @param  hlptim: LPTIM handle
+  * @retval None
+  */
+void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Compare match interrupt */
+  if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMPM) != RESET)
+	{
+    if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_CMPM) !=RESET)
+		{
+      /* Clear Compare match flag */
+      __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPM);
+      /* Compare match Callback */
+      HAL_LPTIM_CompareMatchCallback(hlptim);      
+    }
+  }
+  
+  /* Autoreload match interrupt */
+  if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARRM) != RESET)
+	{
+    if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARRM) !=RESET)
+		{
+      /* Clear Autoreload match flag */
+      __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARRM);
+      /* Autoreload match Callback */
+      HAL_LPTIM_AutoReloadMatchCallback(hlptim);      
+    }
+  }
+  
+  /* Trigger detected interrupt */
+  if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_EXTTRIG) != RESET)
+	{
+    if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_EXTTRIG) !=RESET)
+		{
+      /* Clear Trigger detected flag */
+      __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_EXTTRIG);
+      /* Trigger detected callback */
+      HAL_LPTIM_TriggerCallback(hlptim);      
+    }
+  }
+  
+  /* Compare write interrupt */
+  if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_CMPOK) != RESET)
+	{
+    if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_FLAG_CMPM) !=RESET)
+		{
+      /* Clear Compare write flag */
+      __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_CMPOK);
+      /* Compare write Callback */
+      HAL_LPTIM_CompareWriteCallback(hlptim);      
+    }
+  }
+  
+  /* Autoreload write interrupt */
+  if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_ARROK) != RESET)
+	{
+    if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_ARROK) !=RESET)
+		{
+      /* Clear Autoreload write flag */
+      __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_ARROK);
+      /* Autoreload write Callback */
+      HAL_LPTIM_AutoReloadWriteCallback(hlptim);      
+    }
+  }
+  
+  /* Direction counter changed from Down to Up interrupt */
+  if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_UP) != RESET)
+	{
+    if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_UP) !=RESET)
+		{
+      /* Clear Direction counter changed from Down to Up flag */
+      __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_UP);
+      /* Direction counter changed from Down to Up Callback */
+      HAL_LPTIM_DirectionUpCallback(hlptim);      
+    }
+  }
+  
+  /* Direction counter changed from Up to Down interrupt */
+  if(__HAL_LPTIM_GET_FLAG(hlptim, LPTIM_FLAG_DOWN) != RESET)
+	{
+    if(__HAL_LPTIM_GET_IT_SOURCE(hlptim, LPTIM_IT_DOWN) !=RESET)
+		{
+      /* Clear Direction counter changed from Up to Down flag */
+      __HAL_LPTIM_CLEAR_FLAG(hlptim, LPTIM_FLAG_DOWN);
+      /* Direction counter changed from Up to Down Callback */
+      HAL_LPTIM_DirectionDownCallback(hlptim);      
+    }
+  }
+}
+
+/**
+  * @brief  Compare match callback in non blocking mode 
+  * @param  hlptim : LPTIM handle
+  * @retval None
+  */
+__weak void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hlptim);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LPTIM_CompareMatchCallback could be implemented in the user file
+   */  
+}
+
+/**
+  * @brief  Autoreload match callback in non blocking mode 
+  * @param  hlptim : LPTIM handle
+  * @retval None
+  */
+__weak void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hlptim);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LPTIM_AutoReloadMatchCallback could be implemented in the user file
+   */  
+}
+
+/**
+  * @brief  Trigger detected callback in non blocking mode 
+  * @param  hlptim : LPTIM handle
+  * @retval None
+  */
+__weak void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hlptim);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LPTIM_TriggerCallback could be implemented in the user file
+   */  
+}
+
+/**
+  * @brief  Compare write callback in non blocking mode 
+  * @param  hlptim : LPTIM handle
+  * @retval None
+  */
+__weak void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hlptim);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LPTIM_CompareWriteCallback could be implemented in the user file
+   */  
+}
+
+/**
+  * @brief  Autoreload write callback in non blocking mode 
+  * @param  hlptim : LPTIM handle
+  * @retval None
+  */
+__weak void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hlptim);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LPTIM_AutoReloadWriteCallback could be implemented in the user file
+   */  
+}
+
+/**
+  * @brief  Direction counter changed from Down to Up callback in non blocking mode 
+  * @param  hlptim : LPTIM handle
+  * @retval None
+  */
+__weak void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hlptim);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LPTIM_DirectionUpCallback could be implemented in the user file
+   */  
+}
+
+/**
+  * @brief  Direction counter changed from Up to Down callback in non blocking mode 
+  * @param  hlptim : LPTIM handle
+  * @retval None
+  */
+__weak void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hlptim);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LPTIM_DirectionDownCallback could be implemented in the user file
+   */  
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Group5 Peripheral State functions 
+ *  @brief   Peripheral State functions. 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### Peripheral State functions #####
+  ==============================================================================  
+    [..]
+    This subsection permits to get in run-time the status of the peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the LPTIM state.
+  * @param  hlptim: LPTIM handle
+  * @retval HAL state
+  */
+HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim)
+{
+  return hlptim->State;
+}
+
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_lptim.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,648 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_lptim.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of LPTIM HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_LPTIM_H
+#define __STM32F7xx_HAL_LPTIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup LPTIM LPTIM
+  * @brief LPTIM HAL module driver
+  * @{
+  */
+  
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup LPTIM_Exported_Types LPTIM Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  LPTIM Clock configuration definition  
+  */
+typedef struct
+{
+  uint32_t Source;         /*!< Selects the clock source.
+                           This parameter can be a value of @ref LPTIM_Clock_Source   */
+
+  uint32_t Prescaler;      /*!< Specifies the counter clock Prescaler.
+                           This parameter can be a value of @ref LPTIM_Clock_Prescaler */
+  
+}LPTIM_ClockConfigTypeDef;
+
+/** 
+  * @brief  LPTIM Clock configuration definition  
+  */
+typedef struct
+{
+  uint32_t Polarity;      /*!< Selects the polarity of the active edge for the counter unit
+                           if the ULPTIM input is selected.
+                           Note: This parameter is used only when Ultra low power clock source is used.
+                           Note: If the polarity is configured on 'both edges', an auxiliary clock
+                           (one of the Low power oscillator) must be active.
+                           This parameter can be a value of @ref LPTIM_Clock_Polarity */ 
+  
+  uint32_t SampleTime;     /*!< Selects the clock sampling time to configure the clock glitch filter.
+                           Note: This parameter is used only when Ultra low power clock source is used.
+                           This parameter can be a value of @ref LPTIM_Clock_Sample_Time */  
+  
+}LPTIM_ULPClockConfigTypeDef;
+
+/** 
+  * @brief  LPTIM Trigger configuration definition  
+  */
+typedef struct
+{
+  uint32_t Source;        /*!< Selects the Trigger source.
+                          This parameter can be a value of @ref LPTIM_Trigger_Source */
+  
+  uint32_t ActiveEdge;    /*!< Selects the Trigger active edge.
+                          Note: This parameter is used only when an external trigger is used.
+                          This parameter can be a value of @ref LPTIM_External_Trigger_Polarity */
+  
+  uint32_t SampleTime;    /*!< Selects the trigger sampling time to configure the clock glitch filter.
+                          Note: This parameter is used only when an external trigger is used.
+                          This parameter can be a value of @ref LPTIM_Trigger_Sample_Time  */  
+}LPTIM_TriggerConfigTypeDef;
+
+/** 
+  * @brief  LPTIM Initialization Structure definition  
+  */
+typedef struct
+{                                                    
+  LPTIM_ClockConfigTypeDef     Clock;               /*!< Specifies the clock parameters */
+                                                    
+  LPTIM_ULPClockConfigTypeDef  UltraLowPowerClock;  /*!< Specifies the Ultra Low Power clock parameters */
+                                                    
+  LPTIM_TriggerConfigTypeDef   Trigger;             /*!< Specifies the Trigger parameters */
+                                                    
+  uint32_t                     OutputPolarity;      /*!< Specifies the Output polarity.
+                                                    This parameter can be a value of @ref LPTIM_Output_Polarity */
+                                                    
+  uint32_t                     UpdateMode;          /*!< Specifies whether the update of the autorelaod and the compare
+                                                    values is done immediately or after the end of current period.
+                                                    This parameter can be a value of @ref LPTIM_Updating_Mode */
+
+  uint32_t                     CounterSource;       /*!< Specifies whether the counter is incremented each internal event
+                                                    or each external event.
+                                                    This parameter can be a value of @ref LPTIM_Counter_Source */  
+  
+}LPTIM_InitTypeDef;
+
+/** 
+  * @brief  HAL LPTIM State structure definition  
+  */ 
+typedef enum __HAL_LPTIM_StateTypeDef
+{
+  HAL_LPTIM_STATE_RESET            = 0x00,    /*!< Peripheral not yet initialized or disabled  */
+  HAL_LPTIM_STATE_READY            = 0x01,    /*!< Peripheral Initialized and ready for use    */
+  HAL_LPTIM_STATE_BUSY             = 0x02,    /*!< An internal process is ongoing              */    
+  HAL_LPTIM_STATE_TIMEOUT          = 0x03,    /*!< Timeout state                               */  
+  HAL_LPTIM_STATE_ERROR            = 0x04     /*!< Internal Process is ongoing                */                                                                             
+}HAL_LPTIM_StateTypeDef;
+
+/** 
+  * @brief  LPTIM handle Structure definition  
+  */ 
+typedef struct
+{
+      LPTIM_TypeDef              *Instance;         /*!< Register base address     */
+      
+      LPTIM_InitTypeDef           Init;             /*!< LPTIM required parameters */
+  
+      HAL_StatusTypeDef           Status;           /*!< LPTIM peripheral status   */  
+  
+      HAL_LockTypeDef             Lock;             /*!< LPTIM locking object      */
+  
+   __IO  HAL_LPTIM_StateTypeDef   State;            /*!< LPTIM peripheral state    */
+  
+}LPTIM_HandleTypeDef;
+
+/**
+  * @}
+  */ 
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Constants LPTIM Exported Constants
+  * @{
+  */
+
+/** @defgroup LPTIM_Clock_Source LPTIM Clock Source
+  * @{
+  */
+#define LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC        ((uint32_t)0x00)
+#define LPTIM_CLOCKSOURCE_ULPTIM                LPTIM_CFGR_CKSEL                                           
+/**                                             
+  * @}
+  */
+
+/** @defgroup LPTIM_Clock_Prescaler LPTIM Clock Prescaler
+  * @{
+  */
+#define LPTIM_PRESCALER_DIV1                    ((uint32_t)0x000000)
+#define LPTIM_PRESCALER_DIV2                    LPTIM_CFGR_PRESC_0
+#define LPTIM_PRESCALER_DIV4                    LPTIM_CFGR_PRESC_1
+#define LPTIM_PRESCALER_DIV8                    ((uint32_t)(LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_1))
+#define LPTIM_PRESCALER_DIV16                   LPTIM_CFGR_PRESC_2
+#define LPTIM_PRESCALER_DIV32                   ((uint32_t)(LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_2))
+#define LPTIM_PRESCALER_DIV64                   ((uint32_t)(LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_2))
+#define LPTIM_PRESCALER_DIV128                  ((uint32_t)LPTIM_CFGR_PRESC)                                             
+/**
+  * @}
+  */ 
+
+/** @defgroup LPTIM_Output_Polarity LPTIM Output Polarity
+  * @{
+  */
+
+#define LPTIM_OUTPUTPOLARITY_HIGH               ((uint32_t)0x00000000)
+#define LPTIM_OUTPUTPOLARITY_LOW                (LPTIM_CFGR_WAVPOL)
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Clock_Sample_Time LPTIM Clock Sample Time
+  * @{
+  */
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION ((uint32_t)0x00000000)
+#define LPTIM_CLOCKSAMPLETIME_2TRANSITIONS     LPTIM_CFGR_CKFLT_0
+#define LPTIM_CLOCKSAMPLETIME_4TRANSITIONS     LPTIM_CFGR_CKFLT_1
+#define LPTIM_CLOCKSAMPLETIME_8TRANSITIONS     LPTIM_CFGR_CKFLT
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Clock_Polarity LPTIM Clock Polarity
+  * @{
+  */
+
+#define LPTIM_CLOCKPOLARITY_RISING                ((uint32_t)0x00000000)
+#define LPTIM_CLOCKPOLARITY_FALLING               LPTIM_CFGR_CKPOL_0
+#define LPTIM_CLOCKPOLARITY_RISING_FALLING        LPTIM_CFGR_CKPOL_1
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Trigger_Source LPTIM Trigger Source
+  * @{
+  */
+#define LPTIM_TRIGSOURCE_SOFTWARE               ((uint32_t)0x0000FFFF)
+#define LPTIM_TRIGSOURCE_0                      ((uint32_t)0x00000000)
+#define LPTIM_TRIGSOURCE_1                      ((uint32_t)LPTIM_CFGR_TRIGSEL_0)
+#define LPTIM_TRIGSOURCE_2                      LPTIM_CFGR_TRIGSEL_1
+#define LPTIM_TRIGSOURCE_3                      ((uint32_t)LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_1)
+#define LPTIM_TRIGSOURCE_4                      LPTIM_CFGR_TRIGSEL_2
+#define LPTIM_TRIGSOURCE_5                      ((uint32_t)LPTIM_CFGR_TRIGSEL_0 | LPTIM_CFGR_TRIGSEL_2)
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_External_Trigger_Polarity LPTIM External Trigger Polarity
+  * @{
+  */
+#define LPTIM_ACTIVEEDGE_RISING                LPTIM_CFGR_TRIGEN_0
+#define LPTIM_ACTIVEEDGE_FALLING               LPTIM_CFGR_TRIGEN_1
+#define LPTIM_ACTIVEEDGE_RISING_FALLING        LPTIM_CFGR_TRIGEN
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Trigger_Sample_Time LPTIM Trigger Sample Time
+  * @{
+  */
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION  ((uint32_t)0x00000000)
+#define LPTIM_TRIGSAMPLETIME_2TRANSITIONS      LPTIM_CFGR_TRGFLT_0
+#define LPTIM_TRIGSAMPLETIME_4TRANSITIONS      LPTIM_CFGR_TRGFLT_1
+#define LPTIM_TRIGSAMPLETIME_8TRANSITIONS      LPTIM_CFGR_TRGFLT
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Updating_Mode LPTIM Updating Mode
+  * @{
+  */
+
+#define LPTIM_UPDATE_IMMEDIATE                  ((uint32_t)0x00000000)
+#define LPTIM_UPDATE_ENDOFPERIOD                LPTIM_CFGR_PRELOAD
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Counter_Source LPTIM Counter Source
+  * @{
+  */
+
+#define LPTIM_COUNTERSOURCE_INTERNAL            ((uint32_t)0x00000000)
+#define LPTIM_COUNTERSOURCE_EXTERNAL            LPTIM_CFGR_COUNTMODE
+/**
+  * @}
+  */
+ 
+/** @defgroup LPTIM_Flag_Definition LPTIM Flag Definition
+  * @{
+  */
+
+#define LPTIM_FLAG_DOWN                          LPTIM_ISR_DOWN
+#define LPTIM_FLAG_UP                            LPTIM_ISR_UP
+#define LPTIM_FLAG_ARROK                         LPTIM_ISR_ARROK
+#define LPTIM_FLAG_CMPOK                         LPTIM_ISR_CMPOK
+#define LPTIM_FLAG_EXTTRIG                       LPTIM_ISR_EXTTRIG
+#define LPTIM_FLAG_ARRM                          LPTIM_ISR_ARRM
+#define LPTIM_FLAG_CMPM                          LPTIM_ISR_CMPM
+/**
+  * @}
+  */
+
+/** @defgroup LPTIM_Interrupts_Definition LPTIM Interrupts Definition
+  * @{
+  */
+
+#define LPTIM_IT_DOWN                            LPTIM_IER_DOWNIE
+#define LPTIM_IT_UP                              LPTIM_IER_UPIE
+#define LPTIM_IT_ARROK                           LPTIM_IER_ARROKIE
+#define LPTIM_IT_CMPOK                           LPTIM_IER_CMPOKIE
+#define LPTIM_IT_EXTTRIG                         LPTIM_IER_EXTTRIGIE
+#define LPTIM_IT_ARRM                            LPTIM_IER_ARRMIE
+#define LPTIM_IT_CMPM                            LPTIM_IER_CMPMIE
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Macros LPTIM Exported Macros
+  * @{
+  */
+
+/** @brief Reset LPTIM handle state
+  * @param  __HANDLE__: LPTIM handle
+  * @retval None
+  */
+#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET)
+
+/**
+  * @brief  Enable/Disable the LPTIM peripheral.
+  * @param  __HANDLE__: LPTIM handle
+  * @retval None
+  */
+#define __HAL_LPTIM_ENABLE(__HANDLE__)   ((__HANDLE__)->Instance->CR |=  (LPTIM_CR_ENABLE))
+#define __HAL_LPTIM_DISABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR &=  ~(LPTIM_CR_ENABLE))
+
+/**
+  * @brief  Starts the LPTIM peripheral in Continuous or in single mode.
+  * @param  __HANDLE__: DMA handle
+  * @retval None
+  */
+#define __HAL_LPTIM_START_CONTINUOUS(__HANDLE__)  ((__HANDLE__)->Instance->CR |=  LPTIM_CR_CNTSTRT)
+#define __HAL_LPTIM_START_SINGLE(__HANDLE__)      ((__HANDLE__)->Instance->CR |=  LPTIM_CR_SNGSTRT)
+ 
+    
+/**
+  * @brief  Writes the passed parameter in the Autoreload register.
+  * @param  __HANDLE__: LPTIM handle
+  * @param  __VALUE__ : Autoreload value
+  * @retval None
+  */
+#define __HAL_LPTIM_AUTORELOAD_SET(__HANDLE__ , __VALUE__)  ((__HANDLE__)->Instance->ARR =  (__VALUE__))
+
+/**
+  * @brief  Writes the passed parameter in the Compare register.
+  * @param  __HANDLE__: LPTIM handle
+  * @param  __VALUE__ : Compare value
+  * @retval None
+  */
+#define __HAL_LPTIM_COMPARE_SET(__HANDLE__ , __VALUE__)     ((__HANDLE__)->Instance->CMP =  (__VALUE__))
+
+/**
+  * @brief  Checks whether the specified LPTIM flag is set or not.
+  * @param  __HANDLE__: LPTIM handle
+  * @param  __FLAG__  : LPTIM flag to check
+  *            This parameter can be a value of:
+  *            @arg LPTIM_FLAG_DOWN    : Counter direction change up Flag.
+  *            @arg LPTIM_FLAG_UP      : Counter direction change down to up Flag.
+  *            @arg LPTIM_FLAG_ARROK   : Autoreload register update OK Flag.
+  *            @arg LPTIM_FLAG_CMPOK   : Compare register update OK Flag.
+  *            @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
+  *            @arg LPTIM_FLAG_ARRM    : Autoreload match Flag.
+  *            @arg LPTIM_FLAG_CMPM    : Compare match Flag.
+  * @retval The state of the specified flag (SET or RESET).
+  */
+#define __HAL_LPTIM_GET_FLAG(__HANDLE__, __FLAG__)          (((__HANDLE__)->Instance->ISR &(__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clears the specified LPTIM flag.
+  * @param  __HANDLE__: LPTIM handle.
+  * @param  __FLAG__  : LPTIM flag to clear.
+  *            This parameter can be a value of:
+  *            @arg LPTIM_FLAG_DOWN    : Counter direction change up Flag.
+  *            @arg LPTIM_FLAG_UP      : Counter direction change down to up Flag.
+  *            @arg LPTIM_FLAG_ARROK   : Autoreload register update OK Flag.
+  *            @arg LPTIM_FLAG_CMPOK   : Compare register update OK Flag.
+  *            @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
+  *            @arg LPTIM_FLAG_ARRM    : Autoreload match Flag.
+  *            @arg LPTIM_FLAG_CMPM    : Compare match Flag.
+  * @retval None.
+  */
+#define __HAL_LPTIM_CLEAR_FLAG(__HANDLE__, __FLAG__)         ((__HANDLE__)->Instance->ICR  = (__FLAG__))
+
+/**
+  * @brief  Enable the specified LPTIM interrupt.
+  * @param  __HANDLE__    : LPTIM handle.
+  * @param  __INTERRUPT__ : LPTIM interrupt to set.
+  *            This parameter can be a value of:
+  *            @arg LPTIM_IT_DOWN    : Counter direction change up Interrupt.
+  *            @arg LPTIM_IT_UP      : Counter direction change down to up Interrupt.
+  *            @arg LPTIM_IT_ARROK   : Autoreload register update OK Interrupt.
+  *            @arg LPTIM_IT_CMPOK   : Compare register update OK Interrupt.
+  *            @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+  *            @arg LPTIM_IT_ARRM    : Autoreload match Interrupt.
+  *            @arg LPTIM_IT_CMPM    : Compare match Interrupt.
+  * @retval None.
+  */
+#define __HAL_LPTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__)         ((__HANDLE__)->Instance->IER  |= (__INTERRUPT__))
+
+ /**
+  * @brief  Disable the specified LPTIM interrupt.
+  * @param  __HANDLE__    : LPTIM handle.
+  * @param  __INTERRUPT__ : LPTIM interrupt to set.
+  *            This parameter can be a value of:
+  *            @arg LPTIM_IT_DOWN    : Counter direction change up Interrupt.
+  *            @arg LPTIM_IT_UP      : Counter direction change down to up Interrupt.
+  *            @arg LPTIM_IT_ARROK   : Autoreload register update OK Interrupt.
+  *            @arg LPTIM_IT_CMPOK   : Compare register update OK Interrupt.
+  *            @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+  *            @arg LPTIM_IT_ARRM    : Autoreload match Interrupt.
+  *            @arg LPTIM_IT_CMPM    : Compare match Interrupt.
+  * @retval None.
+  */
+#define __HAL_LPTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__)         ((__HANDLE__)->Instance->IER  &= (~(__INTERRUPT__)))
+
+    /**
+  * @brief  Checks whether the specified LPTIM interrupt is set or not.
+  * @param  __HANDLE__    : LPTIM handle.
+  * @param  __INTERRUPT__ : LPTIM interrupt to check.
+  *            This parameter can be a value of:
+  *            @arg LPTIM_IT_DOWN    : Counter direction change up Interrupt.
+  *            @arg LPTIM_IT_UP      : Counter direction change down to up Interrupt.
+  *            @arg LPTIM_IT_ARROK   : Autoreload register update OK Interrupt.
+  *            @arg LPTIM_IT_CMPOK   : Compare register update OK Interrupt.
+  *            @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+  *            @arg LPTIM_IT_ARRM    : Autoreload match Interrupt.
+  *            @arg LPTIM_IT_CMPM    : Compare match Interrupt.
+  * @retval Interrupt status.
+  */
+    
+#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+  * @}
+  */
+   
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim);
+HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim);
+
+/* MSP functions  *************************************************************/
+void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim);
+
+/* Start/Stop operation functions  *********************************************/
+/* ################################# PWM Mode ################################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################# One Pulse Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################## Set once Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################### Encoder Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################# Time out  Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################## Counter Mode ###############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* Reading operation functions ************************************************/
+uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim);
+uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim);
+uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim);
+
+/* LPTIM IRQ functions  *******************************************************/
+void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim);
+
+/* CallBack functions  ********************************************************/
+void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim);
+
+/* Peripheral State functions  ************************************************/
+HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim);
+
+/**
+  * @}
+  */
+  
+/* Private types -------------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Types LPTIM Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Variables LPTIM Private Variables
+  * @{
+  */
+  
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Constants LPTIM Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Macros LPTIM Private Macros
+  * @{
+  */
+  
+#define IS_LPTIM_CLOCK_SOURCE(__SOURCE__)           (((__SOURCE__) == LPTIM_CLOCKSOURCE_ULPTIM) || \
+                                                     ((__SOURCE__) == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC))
+													 
+#define IS_LPTIM_CLOCK_PRESCALER(__PRESCALER__)     (((__PRESCALER__) ==  LPTIM_PRESCALER_DIV1  ) || \
+                                                     ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV2  ) || \
+                                                     ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV4  ) || \
+                                                     ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV8  ) || \
+                                                     ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV16 ) || \
+                                                     ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV32 ) || \
+                                                     ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV64 ) || \
+                                                     ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV128))
+#define IS_LPTIM_CLOCK_PRESCALERDIV1(__PRESCALER__) ((__PRESCALER__) ==  LPTIM_PRESCALER_DIV1)													 
+
+#define IS_LPTIM_OUTPUT_POLARITY(__POLARITY__)      (((__POLARITY__) == LPTIM_OUTPUTPOLARITY_LOW ) || \
+                                                     ((__POLARITY__) == LPTIM_OUTPUTPOLARITY_HIGH))
+													 
+#define IS_LPTIM_CLOCK_SAMPLE_TIME(__SAMPLETIME__)  (((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION) || \
+                                                     ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_2TRANSITIONS)     || \
+                                                     ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_4TRANSITIONS)     || \
+                                                     ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_8TRANSITIONS))
+
+#define IS_LPTIM_CLOCK_POLARITY(__POLARITY__)       (((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING)  || \
+                                                     ((__POLARITY__) == LPTIM_CLOCKPOLARITY_FALLING) || \
+                                                     ((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING_FALLING))
+
+#define IS_LPTIM_TRG_SOURCE(__TRIG__)               (((__TRIG__) == LPTIM_TRIGSOURCE_SOFTWARE) || \
+													 ((__TRIG__) == LPTIM_TRIGSOURCE_0) || \
+													 ((__TRIG__) == LPTIM_TRIGSOURCE_1) || \
+													 ((__TRIG__) == LPTIM_TRIGSOURCE_2) || \
+													 ((__TRIG__) == LPTIM_TRIGSOURCE_3) || \
+													 ((__TRIG__) == LPTIM_TRIGSOURCE_4) || \
+													 ((__TRIG__) == LPTIM_TRIGSOURCE_5))
+
+#define IS_LPTIM_EXT_TRG_POLARITY(__POLAR__)        (((__POLAR__) == LPTIM_ACTIVEEDGE_RISING         ) || \
+                                                     ((__POLAR__) == LPTIM_ACTIVEEDGE_FALLING        ) || \
+                                                     ((__POLAR__) == LPTIM_ACTIVEEDGE_RISING_FALLING ))
+
+#define IS_LPTIM_TRIG_SAMPLE_TIME(__SAMPLETIME__)   (((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION) || \
+                                                     ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_2TRANSITIONS    ) || \
+                                                     ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_4TRANSITIONS    ) || \
+                                                     ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_8TRANSITIONS    ))		
+
+#define IS_LPTIM_UPDATE_MODE(__MODE__)              (((__MODE__) == LPTIM_UPDATE_IMMEDIATE) || \
+                                                     ((__MODE__) == LPTIM_UPDATE_ENDOFPERIOD))
+
+#define IS_LPTIM_COUNTER_SOURCE(__SOURCE__)         (((__SOURCE__) == LPTIM_COUNTERSOURCE_INTERNAL) || \
+                                                     ((__SOURCE__) == LPTIM_COUNTERSOURCE_EXTERNAL))
+
+#define IS_LPTIM_AUTORELOAD(__AUTORELOAD__)         ((__AUTORELOAD__) <= 0x0000FFFF)
+
+#define IS_LPTIM_COMPARE(__COMPARE__)               ((__COMPARE__) <= 0x0000FFFF)
+  
+#define IS_LPTIM_PERIOD(PERIOD)               ((PERIOD) <= 0x0000FFFF)
+
+#define IS_LPTIM_PULSE(PULSE)                 ((PULSE) <= 0x0000FFFF)
+
+/**
+  * @}
+  */ 
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LPTIM_Private_Functions LPTIM Private Functions
+  * @{
+  */
+  
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_LPTIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_ltdc.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1205 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_ltdc.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   LTDC HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the LTDC peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions  
+  *           + Peripheral State and Errors functions
+  *           
+  @verbatim      
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+     (#) Program the required configuration through the following parameters:   
+         the LTDC timing, the horizontal and vertical polarity, 
+         the pixel clock polarity, Data Enable polarity and the LTDC background color value 
+         using HAL_LTDC_Init() function
+
+     (#) Program the required configuration through the following parameters:   
+         the pixel format, the blending factors, input alpha value, the window size 
+         and the image size using HAL_LTDC_ConfigLayer() function for foreground
+         or/and background layer.     
+  
+     (#) Optionally, configure and enable the CLUT using HAL_LTDC_ConfigCLUT() and 
+         HAL_LTDC_EnableCLUT functions.
+       
+     (#) Optionally, enable the Dither using HAL_LTDC_EnableDither().       
+
+     (#) Optionally, configure and enable the Color keying using HAL_LTDC_ConfigColorKeying()
+         and HAL_LTDC_EnableColorKeying functions.
+
+     (#) Optionally, configure LineInterrupt using HAL_LTDC_ProgramLineEvent()
+         function
+
+     (#) If needed, reconfigure and change the pixel format value, the alpha value
+         value, the window size, the window position and the layer start address 
+         for foreground or/and background layer using respectively the following 
+         functions: HAL_LTDC_SetPixelFormat(), HAL_LTDC_SetAlpha(), HAL_LTDC_SetWindowSize(),
+         HAL_LTDC_SetWindowPosition(), HAL_LTDC_SetAddress.
+                     
+     (#) To control LTDC state you can use the following function: HAL_LTDC_GetState()               
+
+     *** LTDC HAL driver macros list ***
+     ============================================= 
+     [..]
+       Below the list of most used macros in LTDC HAL driver.
+       
+      (+) __HAL_LTDC_ENABLE: Enable the LTDC.
+      (+) __HAL_LTDC_DISABLE: Disable the LTDC.
+      (+) __HAL_LTDC_LAYER_ENABLE: Enable the LTDC Layer.
+      (+) __HAL_LTDC_LAYER_DISABLE: Disable the LTDC Layer.
+      (+) __HAL_LTDC_RELOAD_CONFIG: Reload  Layer Configuration.
+      (+) __HAL_LTDC_GET_FLAG: Get the LTDC pending flags.
+      (+) __HAL_LTDC_CLEAR_FLAG: Clear the LTDC pending flags.
+      (+) __HAL_LTDC_ENABLE_IT: Enable the specified LTDC interrupts. 
+      (+) __HAL_LTDC_DISABLE_IT: Disable the specified LTDC interrupts.
+      (+) __HAL_LTDC_GET_IT_SOURCE: Check whether the specified LTDC interrupt has occurred or not.
+      
+     [..] 
+       (@) You can refer to the LTDC HAL driver header file for more useful macros
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+#if defined (STM32F746xx) || defined (STM32F756xx)
+
+/** @defgroup LTDC LTDC
+  * @brief LTDC HAL module driver
+  * @{
+  */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/    
+/* Private function prototypes -----------------------------------------------*/
+static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup LTDC_Exported_Functions LTDC Exported Functions
+  * @{
+  */
+
+/** @defgroup LTDC_Exported_Functions_Group1 Initialization and Configuration functions
+ *  @brief   Initialization and Configuration functions
+ *
+@verbatim   
+ ===============================================================================
+                ##### Initialization and Configuration functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Initialize and configure the LTDC
+      (+) De-initialize the LTDC 
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Initializes the LTDC according to the specified
+  *         parameters in the LTDC_InitTypeDef and create the associated handle.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc)
+{
+  uint32_t tmp = 0, tmp1 = 0;
+
+  /* Check the LTDC peripheral state */
+  if(hltdc == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check function parameters */
+  assert_param(IS_LTDC_ALL_INSTANCE(hltdc->Instance));
+  assert_param(IS_LTDC_HSYNC(hltdc->Init.HorizontalSync));
+  assert_param(IS_LTDC_VSYNC(hltdc->Init.VerticalSync));
+  assert_param(IS_LTDC_AHBP(hltdc->Init.AccumulatedHBP));
+  assert_param(IS_LTDC_AVBP(hltdc->Init.AccumulatedVBP));
+  assert_param(IS_LTDC_AAH(hltdc->Init.AccumulatedActiveH));
+  assert_param(IS_LTDC_AAW(hltdc->Init.AccumulatedActiveW));
+  assert_param(IS_LTDC_TOTALH(hltdc->Init.TotalHeigh));
+  assert_param(IS_LTDC_TOTALW(hltdc->Init.TotalWidth));
+  assert_param(IS_LTDC_HSPOL(hltdc->Init.HSPolarity));
+  assert_param(IS_LTDC_VSPOL(hltdc->Init.VSPolarity));
+  assert_param(IS_LTDC_DEPOL(hltdc->Init.DEPolarity));
+  assert_param(IS_LTDC_PCPOL(hltdc->Init.PCPolarity));
+
+  if(hltdc->State == HAL_LTDC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hltdc->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_LTDC_MspInit(hltdc);
+  }
+  
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Configures the HS, VS, DE and PC polarity */
+  hltdc->Instance->GCR &= ~(LTDC_GCR_HSPOL | LTDC_GCR_VSPOL | LTDC_GCR_DEPOL | LTDC_GCR_PCPOL);
+  hltdc->Instance->GCR |=  (uint32_t)(hltdc->Init.HSPolarity | hltdc->Init.VSPolarity | \
+  hltdc->Init.DEPolarity | hltdc->Init.PCPolarity);
+
+  /* Sets Synchronization size */
+  hltdc->Instance->SSCR &= ~(LTDC_SSCR_VSH | LTDC_SSCR_HSW);
+  tmp = (hltdc->Init.HorizontalSync << 16);
+  hltdc->Instance->SSCR |= (tmp | hltdc->Init.VerticalSync);
+
+  /* Sets Accumulated Back porch */
+  hltdc->Instance->BPCR &= ~(LTDC_BPCR_AVBP | LTDC_BPCR_AHBP);
+  tmp = (hltdc->Init.AccumulatedHBP << 16);
+  hltdc->Instance->BPCR |= (tmp | hltdc->Init.AccumulatedVBP);
+
+  /* Sets Accumulated Active Width */
+  hltdc->Instance->AWCR &= ~(LTDC_AWCR_AAH | LTDC_AWCR_AAW);
+  tmp = (hltdc->Init.AccumulatedActiveW << 16);
+  hltdc->Instance->AWCR |= (tmp | hltdc->Init.AccumulatedActiveH);
+
+  /* Sets Total Width */
+  hltdc->Instance->TWCR &= ~(LTDC_TWCR_TOTALH | LTDC_TWCR_TOTALW);
+  tmp = (hltdc->Init.TotalWidth << 16);
+  hltdc->Instance->TWCR |= (tmp | hltdc->Init.TotalHeigh);
+
+  /* Sets the background color value */
+  tmp = ((uint32_t)(hltdc->Init.Backcolor.Green) << 8);
+  tmp1 = ((uint32_t)(hltdc->Init.Backcolor.Red) << 16);
+  hltdc->Instance->BCCR &= ~(LTDC_BCCR_BCBLUE | LTDC_BCCR_BCGREEN | LTDC_BCCR_BCRED);
+  hltdc->Instance->BCCR |= (tmp1 | tmp | hltdc->Init.Backcolor.Blue);
+
+  /* Enable the transfer Error interrupt */
+  __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_TE);
+
+  /* Enable the FIFO underrun interrupt */
+  __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_FU);
+
+  /* Enable LTDC by setting LTDCEN bit */
+  __HAL_LTDC_ENABLE(hltdc);
+
+  /* Initialize the error code */
+  hltdc->ErrorCode = HAL_LTDC_ERROR_NONE;  
+
+  /* Initialize the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deinitializes the LTDC peripheral registers to their default reset
+  *         values.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval None
+  */
+
+HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc)
+{
+  /* DeInit the low level hardware */
+  HAL_LTDC_MspDeInit(hltdc); 
+
+  /* Initialize the error code */
+  hltdc->ErrorCode = HAL_LTDC_ERROR_NONE;
+
+  /* Initialize the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the LTDC MSP.
+  * @param  hltdc : pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval None
+  */
+__weak void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hltdc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LTDC_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  DeInitializes the LTDC MSP.
+  * @param  hltdc : pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval None
+  */
+__weak void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hltdc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LTDC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup LTDC_Exported_Functions_Group2 IO operation functions 
+ *  @brief   IO operation functions  
+ *
+@verbatim
+ ===============================================================================
+                      #####  IO operation functions  #####
+ ===============================================================================  
+    [..]  This section provides function allowing to:
+      (+) Handle LTDC interrupt request
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Handles LTDC interrupt request.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.  
+  * @retval HAL status
+  */
+void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc)
+{
+  /* Transfer Error Interrupt management ***************************************/
+  if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_TE) != RESET)
+  {
+    if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_TE) != RESET)
+    {
+      /* Disable the transfer Error interrupt */
+      __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_TE);
+
+      /* Clear the transfer error flag */
+      __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_TE);
+
+      /* Update error code */
+      hltdc->ErrorCode |= HAL_LTDC_ERROR_TE;
+
+      /* Change LTDC state */
+      hltdc->State = HAL_LTDC_STATE_ERROR;
+
+      /* Process unlocked */
+      __HAL_UNLOCK(hltdc);
+
+      /* Transfer error Callback */
+      HAL_LTDC_ErrorCallback(hltdc);
+    }
+  }
+  /* FIFO underrun Interrupt management ***************************************/
+  if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_FU) != RESET)
+  {
+    if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_FU) != RESET)
+    {
+      /* Disable the FIFO underrun interrupt */
+      __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_FU);
+
+      /* Clear the FIFO underrun flag */
+      __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_FU);
+
+      /* Update error code */
+      hltdc->ErrorCode |= HAL_LTDC_ERROR_FU;
+
+      /* Change LTDC state */
+      hltdc->State = HAL_LTDC_STATE_ERROR;
+
+      /* Process unlocked */
+      __HAL_UNLOCK(hltdc);
+      
+      /* Transfer error Callback */
+      HAL_LTDC_ErrorCallback(hltdc);
+    }
+  }
+  /* Line Interrupt management ************************************************/
+  if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_LI) != RESET)
+  {
+    if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_LI) != RESET)
+    {
+      /* Disable the Line interrupt */
+      __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI);
+
+      /* Clear the Line interrupt flag */  
+      __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_LI);
+
+      /* Change LTDC state */
+      hltdc->State = HAL_LTDC_STATE_READY;
+
+      /* Process unlocked */
+      __HAL_UNLOCK(hltdc);
+
+      /* Line interrupt Callback */
+      HAL_LTDC_LineEvenCallback(hltdc);
+    }
+  }
+}
+
+/**
+  * @brief  Error LTDC callback.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval None
+  */
+__weak void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hltdc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LTDC_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Line Event callback.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval None
+  */
+__weak void HAL_LTDC_LineEvenCallback(LTDC_HandleTypeDef *hltdc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hltdc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_LTDC_LineEvenCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief    Peripheral Control functions 
+ *
+@verbatim   
+ ===============================================================================
+                    ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Configure the LTDC foreground or/and background parameters.
+      (+) Set the active layer.
+      (+) Configure the color keying.
+      (+) Configure the C-LUT.
+      (+) Enable / Disable the color keying.
+      (+) Enable / Disable the C-LUT.
+      (+) Update the layer position.
+      (+) Update the layer size.
+      (+) Update pixel format on the fly. 
+      (+) Update transparency on the fly.
+      (+) Update address on the fly.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configure the LTDC Layer according to the specified
+  *         parameters in the LTDC_InitTypeDef and create the associated handle.
+  * @param  hltdc:     pointer to a LTDC_HandleTypeDef structure that contains
+  *                    the configuration information for the LTDC.
+  * @param  pLayerCfg: pointer to a LTDC_LayerCfgTypeDef structure that contains
+  *                    the configuration information for the Layer.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                    This parameter can be one of the following values:
+  *                    0 or 1
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx)
+{   
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+  
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+  assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat));
+  assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1));
+  assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2));
+  assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+  assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+  assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+  assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+  assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0));
+  assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth));
+  assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight));
+
+  /* Copy new layer configuration into handle structure */
+  hltdc->LayerCfg[LayerIdx] = *pLayerCfg;  
+
+  /* Configure the LTDC Layer */  
+  LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Initialize the LTDC state*/
+  hltdc->State  = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the color keying.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  RGBValue: the color key value
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx)
+{
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Configures the default color values */
+  LTDC_LAYER(hltdc, LayerIdx)->CKCR &=  ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED);
+  LTDC_LAYER(hltdc, LayerIdx)->CKCR  = RGBValue;
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Load the color lookup table.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  pCLUT:    pointer to the color lookup table address.
+  * @param  CLUTSize: the color lookup table size.  
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx)
+{
+  uint32_t tmp = 0;
+  uint32_t counter = 0;
+  uint32_t pcounter = 0;
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;  
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx)); 
+
+  for(counter = 0; (counter < CLUTSize); counter++)
+  {
+    if(hltdc->LayerCfg[LayerIdx].PixelFormat == LTDC_PIXEL_FORMAT_AL44)
+    {
+      tmp  = (((counter + 16*counter) << 24) | ((uint32_t)(*pCLUT) & 0xFF) | ((uint32_t)(*pCLUT) & 0xFF00) | ((uint32_t)(*pCLUT) & 0xFF0000));
+    }
+    else
+    { 
+      tmp  = ((counter << 24) | ((uint32_t)(*pCLUT) & 0xFF) | ((uint32_t)(*pCLUT) & 0xFF00) | ((uint32_t)(*pCLUT) & 0xFF0000));
+    }
+    pcounter = (uint32_t)pCLUT + sizeof(*pCLUT);
+    pCLUT = (uint32_t *)pcounter;
+
+    /* Specifies the C-LUT address and RGB value */
+    LTDC_LAYER(hltdc, LayerIdx)->CLUTWR  = tmp;
+  }
+  
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY; 
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);  
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enable the color keying.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{  
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Enable LTDC color keying by setting COLKEN bit */
+  LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN;
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY; 
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;  
+}
+  
+/**
+  * @brief  Disable the color keying.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Disable LTDC color keying by setting COLKEN bit */
+  LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN;
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY; 
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enable the color lookup table.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Disable LTDC color lookup table by setting CLUTEN bit */
+  LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN;
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY; 
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the color lookup table.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1   
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
+{
+ 
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Disable LTDC color lookup table by setting CLUTEN bit */
+  LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN;
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY; 
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables Dither.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval  HAL status
+  */
+
+HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc)
+{
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Enable Dither by setting DTEN bit */
+  LTDC->GCR |= (uint32_t)LTDC_GCR_DTEN;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY; 
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables Dither.
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval  HAL status
+  */
+
+HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc)
+{
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Disable Dither by setting DTEN bit */
+  LTDC->GCR &= ~(uint32_t)LTDC_GCR_DTEN;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the LTDC window size.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  XSize:    LTDC Pixel per line
+  * @param  YSize:    LTDC Line number
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx) 
+{
+  LTDC_LayerCfgTypeDef *pLayerCfg;
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY; 
+
+  /* Get layer configuration from handle structure */
+  pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+  /* Check the parameters (Layers parameters)*/
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+  assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+  assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+  assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+  assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+  assert_param(IS_LTDC_CFBLL(XSize));
+  assert_param(IS_LTDC_CFBLNBR(YSize));
+
+  /* update horizontal start/stop */
+  pLayerCfg->WindowX0 = 0;
+  pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0;
+
+  /* update vertical start/stop */  
+  pLayerCfg->WindowY0 = 0;
+  pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0;
+
+  /* Reconfigures the color frame buffer pitch in byte */
+  pLayerCfg->ImageWidth = XSize;
+
+  /* Reconfigures the frame buffer line number */
+  pLayerCfg->ImageHeight = YSize;
+
+  /* Set LTDC parameters */
+  LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the LTDC window position.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  X0:       LTDC window X offset
+  * @param  Y0:       LTDC window Y offset
+  * @param  LayerIdx:  LTDC Layer index.
+  *                         This parameter can be one of the following values:
+  *                         0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx)
+{
+  LTDC_LayerCfgTypeDef *pLayerCfg;
+  
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Get layer configuration from handle structure */
+  pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+  assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
+  assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
+  assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
+  assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
+
+  /* update horizontal start/stop */
+  pLayerCfg->WindowX0 = X0;
+  pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth;
+
+  /* update vertical start/stop */
+  pLayerCfg->WindowY0 = Y0;
+  pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight;
+
+  /* Set LTDC parameters */
+  LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reconfigure the pixel format.
+  * @param  hltdc:       pointer to a LTDC_HandleTypeDef structure that contains
+  *                      the configuration information for the LTDC.
+  * @param  Pixelformat: new pixel format value.
+  * @param  LayerIdx:    LTDC Layer index.
+  *                      This parameter can be one of the following values:
+  *                      0 or 1.
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx)
+{
+  LTDC_LayerCfgTypeDef *pLayerCfg;
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+  assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat));
+
+  /* Get layer configuration from handle structure */
+  pLayerCfg = &hltdc->LayerCfg[LayerIdx];  
+
+  /* Reconfigure the pixel format */
+  pLayerCfg->PixelFormat = Pixelformat;
+
+  /* Set LTDC parameters */
+  LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);   
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Reconfigure the layer alpha value.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  Alpha:    new alpha value.
+  * @param  LayerIdx:  LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx)
+{
+  LTDC_LayerCfgTypeDef *pLayerCfg;
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_ALPHA(Alpha));
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Get layer configuration from handle structure */
+  pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+  /* Reconfigure the Alpha value */
+  pLayerCfg->Alpha = Alpha;
+
+  /* Set LTDC parameters */
+  LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+/**
+  * @brief  Reconfigure the frame buffer Address.
+  * @param  hltdc:    pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  Address:  new address value.
+  * @param  LayerIdx: LTDC Layer index.
+  *                   This parameter can be one of the following values:
+  *                   0 or 1.
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx)
+{
+  LTDC_LayerCfgTypeDef *pLayerCfg;
+
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LAYER(LayerIdx));
+
+  /* Get layer configuration from handle structure */
+  pLayerCfg = &hltdc->LayerCfg[LayerIdx];
+
+  /* Reconfigure the Address */
+  pLayerCfg->FBStartAdress = Address;
+
+  /* Set LTDC parameters */
+  LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
+
+  /* Sets the Reload type */
+  hltdc->Instance->SRCR = LTDC_SRCR_IMR;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Define the position of the line interrupt .
+  * @param  hltdc:             pointer to a LTDC_HandleTypeDef structure that contains
+  *                            the configuration information for the LTDC.
+  * @param  Line:   Line Interrupt Position.
+  * @retval  HAL status
+  */
+HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line)
+{
+  /* Process locked */
+  __HAL_LOCK(hltdc);
+
+  /* Change LTDC peripheral state */
+  hltdc->State = HAL_LTDC_STATE_BUSY;
+
+  /* Check the parameters */
+  assert_param(IS_LTDC_LIPOS(Line));
+
+  /* Enable the Line interrupt */
+  __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_LI);
+
+  /* Sets the Line Interrupt position */
+  LTDC->LIPCR = (uint32_t)Line;
+
+  /* Change the LTDC state*/
+  hltdc->State = HAL_LTDC_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hltdc);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Exported_Functions_Group4 Peripheral State and Errors functions
+ *  @brief    Peripheral State and Errors functions 
+ *
+@verbatim   
+ ===============================================================================
+                  ##### Peripheral State and Errors functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides functions allowing to
+      (+) Check the LTDC state.
+      (+) Get error code.  
+
+@endverbatim
+  * @{
+  */ 
+
+/**
+  * @brief  Return the LTDC state
+  * @param  hltdc: pointer to a LTDC_HandleTypeDef structure that contains
+  *                the configuration information for the LTDC.
+  * @retval HAL state
+  */
+HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc)
+{
+  return hltdc->State;
+}
+
+/**
+* @brief  Return the LTDC error code
+* @param  hltdc : pointer to a LTDC_HandleTypeDef structure that contains
+  *               the configuration information for the LTDC.
+* @retval LTDC Error Code
+*/
+uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc)
+{
+  return hltdc->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  Configures the LTDC peripheral 
+  * @param  hltdc   :  Pointer to a LTDC_HandleTypeDef structure that contains
+  *                   the configuration information for the LTDC.
+  * @param  pLayerCfg: Pointer LTDC Layer Configuration structure
+  * @param  LayerIdx:  LTDC Layer index.
+  *                    This parameter can be one of the following values: 0 or 1
+  * @retval None
+  */
+static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx)
+{
+  uint32_t tmp = 0;
+  uint32_t tmp1 = 0;
+  uint32_t tmp2 = 0;
+
+  /* Configures the horizontal start and stop position */
+  tmp = ((pLayerCfg->WindowX1 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16)) << 16);
+  LTDC_LAYER(hltdc, LayerIdx)->WHPCR &= ~(LTDC_LxWHPCR_WHSTPOS | LTDC_LxWHPCR_WHSPPOS);
+  LTDC_LAYER(hltdc, LayerIdx)->WHPCR = ((pLayerCfg->WindowX0 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16) + 1) | tmp);
+
+  /* Configures the vertical start and stop position */
+  tmp = ((pLayerCfg->WindowY1 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP)) << 16);
+  LTDC_LAYER(hltdc, LayerIdx)->WVPCR &= ~(LTDC_LxWVPCR_WVSTPOS | LTDC_LxWVPCR_WVSPPOS);
+  LTDC_LAYER(hltdc, LayerIdx)->WVPCR  = ((pLayerCfg->WindowY0 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP) + 1) | tmp);  
+
+  /* Specifies the pixel format */
+  LTDC_LAYER(hltdc, LayerIdx)->PFCR &= ~(LTDC_LxPFCR_PF);
+  LTDC_LAYER(hltdc, LayerIdx)->PFCR = (pLayerCfg->PixelFormat);
+
+  /* Configures the default color values */
+  tmp = ((uint32_t)(pLayerCfg->Backcolor.Green) << 8);
+  tmp1 = ((uint32_t)(pLayerCfg->Backcolor.Red) << 16);
+  tmp2 = (pLayerCfg->Alpha0 << 24);  
+  LTDC_LAYER(hltdc, LayerIdx)->DCCR &= ~(LTDC_LxDCCR_DCBLUE | LTDC_LxDCCR_DCGREEN | LTDC_LxDCCR_DCRED | LTDC_LxDCCR_DCALPHA);
+  LTDC_LAYER(hltdc, LayerIdx)->DCCR = (pLayerCfg->Backcolor.Blue | tmp | tmp1 | tmp2); 
+
+  /* Specifies the constant alpha value */
+  LTDC_LAYER(hltdc, LayerIdx)->CACR &= ~(LTDC_LxCACR_CONSTA);
+  LTDC_LAYER(hltdc, LayerIdx)->CACR = (pLayerCfg->Alpha);
+
+  /* Specifies the blending factors */
+  LTDC_LAYER(hltdc, LayerIdx)->BFCR &= ~(LTDC_LxBFCR_BF2 | LTDC_LxBFCR_BF1);
+  LTDC_LAYER(hltdc, LayerIdx)->BFCR = (pLayerCfg->BlendingFactor1 | pLayerCfg->BlendingFactor2);
+
+  /* Configures the color frame buffer start address */
+  LTDC_LAYER(hltdc, LayerIdx)->CFBAR &= ~(LTDC_LxCFBAR_CFBADD);
+  LTDC_LAYER(hltdc, LayerIdx)->CFBAR = (pLayerCfg->FBStartAdress);
+
+  if(pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB8888)
+  {
+    tmp = 4;
+  }
+  else if (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB888)
+  {
+    tmp = 3;
+  }
+  else if((pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \
+    (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB565)   || \
+      (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \
+        (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_AL88))
+  {
+    tmp = 2;
+  }
+  else
+  {
+    tmp = 1;
+  }
+
+  /* Configures the color frame buffer pitch in byte */
+  LTDC_LAYER(hltdc, LayerIdx)->CFBLR  &= ~(LTDC_LxCFBLR_CFBLL | LTDC_LxCFBLR_CFBP);
+  LTDC_LAYER(hltdc, LayerIdx)->CFBLR  = (((pLayerCfg->ImageWidth * tmp) << 16) | (((pLayerCfg->WindowX1 - pLayerCfg->WindowX0) * tmp)  + 3));
+
+  /* Configures the frame buffer line number */
+  LTDC_LAYER(hltdc, LayerIdx)->CFBLNR  &= ~(LTDC_LxCFBLNR_CFBLNBR);
+  LTDC_LAYER(hltdc, LayerIdx)->CFBLNR  = (pLayerCfg->ImageHeight);
+
+  /* Enable LTDC_Layer by setting LEN bit */  
+  LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_LEN;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+#endif /* STM32F746xx || STM32F756xx */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_ltdc.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,629 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_ltdc.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of LTDC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_LTDC_H
+#define __STM32F7xx_HAL_LTDC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F756xx) || defined(STM32F746xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup LTDC LTDC
+  * @brief LTDC HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Types LTDC Exported Types
+  * @{
+  */
+#define MAX_LAYER  2
+
+/** 
+  * @brief  LTDC color structure definition
+  */
+typedef struct
+{
+  uint8_t Blue;                    /*!< Configures the blue value.
+                                        This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint8_t Green;                   /*!< Configures the green value.
+                                        This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint8_t Red;                     /*!< Configures the red value. 
+                                        This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint8_t Reserved;                /*!< Reserved 0xFF */
+} LTDC_ColorTypeDef;
+
+/** 
+  * @brief  LTDC Init structure definition
+  */
+typedef struct
+{
+  uint32_t            HSPolarity;                /*!< configures the horizontal synchronization polarity.
+                                                      This parameter can be one value of @ref LTDC_HS_POLARITY */
+
+  uint32_t            VSPolarity;                /*!< configures the vertical synchronization polarity.
+                                                      This parameter can be one value of @ref LTDC_VS_POLARITY */
+
+  uint32_t            DEPolarity;                /*!< configures the data enable polarity. 
+                                                      This parameter can be one of value of @ref LTDC_DE_POLARITY */
+
+  uint32_t            PCPolarity;                /*!< configures the pixel clock polarity. 
+                                                      This parameter can be one of value of @ref LTDC_PC_POLARITY */
+
+  uint32_t            HorizontalSync;            /*!< configures the number of Horizontal synchronization width.
+                                                      This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+  uint32_t            VerticalSync;              /*!< configures the number of Vertical synchronization height. 
+                                                      This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+  uint32_t            AccumulatedHBP;            /*!< configures the accumulated horizontal back porch width.
+                                                      This parameter must be a number between Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */
+
+  uint32_t            AccumulatedVBP;            /*!< configures the accumulated vertical back porch height.
+                                                      This parameter must be a number between Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */
+
+  uint32_t            AccumulatedActiveW;        /*!< configures the accumulated active width. 
+                                                      This parameter must be a number between Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */
+
+  uint32_t            AccumulatedActiveH;        /*!< configures the accumulated active height.
+                                                      This parameter must be a number between Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */
+
+  uint32_t            TotalWidth;                /*!< configures the total width.
+                                                      This parameter must be a number between Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */
+
+  uint32_t            TotalHeigh;                /*!< configures the total height.
+                                                      This parameter must be a number between Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */
+
+  LTDC_ColorTypeDef   Backcolor;                 /*!< Configures the background color. */
+} LTDC_InitTypeDef;
+
+/** 
+  * @brief  LTDC Layer structure definition
+  */
+typedef struct
+{
+  uint32_t WindowX0;                   /*!< Configures the Window Horizontal Start Position.
+                                            This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+  uint32_t WindowX1;                   /*!< Configures the Window Horizontal Stop Position.
+                                            This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+  uint32_t WindowY0;                   /*!< Configures the Window vertical Start Position.
+                                            This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+  uint32_t WindowY1;                   /*!< Configures the Window vertical Stop Position.
+                                            This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x7FF. */
+
+  uint32_t PixelFormat;                /*!< Specifies the pixel format. 
+                                            This parameter can be one of value of @ref LTDC_Pixelformat */
+
+  uint32_t Alpha;                      /*!< Specifies the constant alpha used for blending.
+                                            This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint32_t Alpha0;                     /*!< Configures the default alpha value.
+                                            This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint32_t BlendingFactor1;            /*!< Select the blending factor 1. 
+                                            This parameter can be one of value of @ref LTDC_BlendingFactor1 */
+
+  uint32_t BlendingFactor2;            /*!< Select the blending factor 2. 
+                                            This parameter can be one of value of @ref LTDC_BlendingFactor2 */
+
+  uint32_t FBStartAdress;              /*!< Configures the color frame buffer address */
+
+  uint32_t ImageWidth;                 /*!< Configures the color frame buffer line length. 
+                                            This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x1FFF. */
+
+  uint32_t ImageHeight;                /*!< Specifies the number of line in frame buffer. 
+                                            This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+  LTDC_ColorTypeDef   Backcolor;       /*!< Configures the layer background color. */
+} LTDC_LayerCfgTypeDef;
+
+/** 
+  * @brief  HAL LTDC State structures definition
+  */
+typedef enum
+{
+  HAL_LTDC_STATE_RESET             = 0x00,    /*!< LTDC not yet initialized or disabled */
+  HAL_LTDC_STATE_READY             = 0x01,    /*!< LTDC initialized and ready for use   */
+  HAL_LTDC_STATE_BUSY              = 0x02,    /*!< LTDC internal process is ongoing     */
+  HAL_LTDC_STATE_TIMEOUT           = 0x03,    /*!< LTDC Timeout state                   */
+  HAL_LTDC_STATE_ERROR             = 0x04     /*!< LTDC state error                     */
+}HAL_LTDC_StateTypeDef;
+
+/** 
+  * @brief  LTDC handle Structure definition
+  */
+typedef struct
+{
+  LTDC_TypeDef                *Instance;                /*!< LTDC Register base address                */
+
+  LTDC_InitTypeDef            Init;                     /*!< LTDC parameters                           */
+
+  LTDC_LayerCfgTypeDef        LayerCfg[MAX_LAYER];      /*!< LTDC Layers parameters                    */
+
+  HAL_LockTypeDef             Lock;                     /*!< LTDC Lock                                 */
+
+  __IO HAL_LTDC_StateTypeDef  State;                    /*!< LTDC state                                */
+
+  __IO uint32_t               ErrorCode;                /*!< LTDC Error code                           */
+
+} LTDC_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Constants LTDC Exported Constants
+  * @{
+  */
+
+/** @defgroup LTDC_Error_Code LTDC Error Code
+  * @{
+  */
+#define HAL_LTDC_ERROR_NONE      ((uint32_t)0x00000000)    /*!< LTDC No error             */
+#define HAL_LTDC_ERROR_TE        ((uint32_t)0x00000001)    /*!< LTDC Transfer error       */
+#define HAL_LTDC_ERROR_FU        ((uint32_t)0x00000002)    /*!< LTDC FIFO Underrun        */
+#define HAL_LTDC_ERROR_TIMEOUT   ((uint32_t)0x00000020)    /*!< LTDC Timeout error        */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_HS_POLARITY LTDC HS POLARITY
+  * @{
+  */
+#define LTDC_HSPOLARITY_AL                ((uint32_t)0x00000000)                /*!< Horizontal Synchronization is active low. */
+#define LTDC_HSPOLARITY_AH                LTDC_GCR_HSPOL                        /*!< Horizontal Synchronization is active high. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_VS_POLARITY LTDC VS POLARITY
+  * @{
+  */
+#define LTDC_VSPOLARITY_AL                ((uint32_t)0x00000000)                /*!< Vertical Synchronization is active low. */
+#define LTDC_VSPOLARITY_AH                LTDC_GCR_VSPOL                        /*!< Vertical Synchronization is active high. */
+/**
+  * @}
+  */
+  
+/** @defgroup LTDC_DE_POLARITY LTDC DE POLARITY
+  * @{
+  */
+#define LTDC_DEPOLARITY_AL                ((uint32_t)0x00000000)                /*!< Data Enable, is active low. */
+#define LTDC_DEPOLARITY_AH                LTDC_GCR_DEPOL                        /*!< Data Enable, is active high. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_PC_POLARITY LTDC PC POLARITY
+  * @{
+  */
+#define LTDC_PCPOLARITY_IPC               ((uint32_t)0x00000000)                /*!< input pixel clock. */
+#define LTDC_PCPOLARITY_IIPC              LTDC_GCR_PCPOL                        /*!< inverted input pixel clock. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_SYNC LTDC SYNC
+  * @{
+  */
+#define LTDC_HORIZONTALSYNC               (LTDC_SSCR_HSW >> 16)                 /*!< Horizontal synchronization width. */ 
+#define LTDC_VERTICALSYNC                 LTDC_SSCR_VSH                         /*!< Vertical synchronization height. */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_BACK_COLOR LTDC BACK COLOR
+  * @{
+  */
+#define LTDC_COLOR                   ((uint32_t)0x000000FF)                     /*!< Color mask */ 
+/**
+  * @}
+  */
+      
+/** @defgroup LTDC_BlendingFactor1 LTDC Blending Factor1
+  * @{
+  */
+#define LTDC_BLENDING_FACTOR1_CA                       ((uint32_t)0x00000400)   /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR1_PAxCA                    ((uint32_t)0x00000600)   /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_BlendingFactor2 LTDC Blending Factor2
+  * @{
+  */
+#define LTDC_BLENDING_FACTOR2_CA                       ((uint32_t)0x00000005)   /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR2_PAxCA                    ((uint32_t)0x00000007)   /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+/**
+  * @}
+  */
+      
+/** @defgroup LTDC_Pixelformat LTDC Pixel format
+  * @{
+  */
+#define LTDC_PIXEL_FORMAT_ARGB8888                  ((uint32_t)0x00000000)      /*!< ARGB8888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB888                    ((uint32_t)0x00000001)      /*!< RGB888 LTDC pixel format   */
+#define LTDC_PIXEL_FORMAT_RGB565                    ((uint32_t)0x00000002)      /*!< RGB565 LTDC pixel format   */
+#define LTDC_PIXEL_FORMAT_ARGB1555                  ((uint32_t)0x00000003)      /*!< ARGB1555 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB4444                  ((uint32_t)0x00000004)      /*!< ARGB4444 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_L8                        ((uint32_t)0x00000005)      /*!< L8 LTDC pixel format       */
+#define LTDC_PIXEL_FORMAT_AL44                      ((uint32_t)0x00000006)      /*!< AL44 LTDC pixel format     */
+#define LTDC_PIXEL_FORMAT_AL88                      ((uint32_t)0x00000007)      /*!< AL88 LTDC pixel format     */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Alpha LTDC Alpha
+  * @{
+  */
+#define LTDC_ALPHA               LTDC_LxCACR_CONSTA                             /*!< LTDC Cte Alpha mask */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_LAYER_Config LTDC LAYER Config
+  * @{
+  */
+#define LTDC_STOPPOSITION                 (LTDC_LxWHPCR_WHSPPOS >> 16)          /*!< LTDC Layer stop position  */
+#define LTDC_STARTPOSITION                LTDC_LxWHPCR_WHSTPOS                  /*!< LTDC Layer start position */
+
+#define LTDC_COLOR_FRAME_BUFFER           LTDC_LxCFBLR_CFBLL                    /*!< LTDC Layer Line length    */ 
+#define LTDC_LINE_NUMBER                  LTDC_LxCFBLNR_CFBLNBR                 /*!< LTDC Layer Line number    */
+/**
+  * @}
+  */
+
+/** @defgroup LTDC_Interrupts LTDC Interrupts
+  * @{
+  */
+#define LTDC_IT_LI                      LTDC_IER_LIE
+#define LTDC_IT_FU                      LTDC_IER_FUIE
+#define LTDC_IT_TE                      LTDC_IER_TERRIE
+#define LTDC_IT_RR                      LTDC_IER_RRIE
+/**
+  * @}
+  */
+      
+/** @defgroup LTDC_Flag LTDC Flag
+  * @{
+  */
+#define LTDC_FLAG_LI                     LTDC_ISR_LIF
+#define LTDC_FLAG_FU                     LTDC_ISR_FUIF
+#define LTDC_FLAG_TE                     LTDC_ISR_TERRIF
+#define LTDC_FLAG_RR                     LTDC_ISR_RRIF
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */  
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Macros LTDC Exported Macros
+  * @{
+  */
+
+/** @brief Reset LTDC handle state
+  * @param  __HANDLE__: specifies the LTDC handle.
+  * @retval None
+  */
+#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET)
+
+/**
+  * @brief  Enable the LTDC.
+  * @param  __HANDLE__: LTDC handle
+  * @retval None.
+  */
+#define __HAL_LTDC_ENABLE(__HANDLE__)    ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN)
+
+/**
+  * @brief  Disable the LTDC.
+  * @param  __HANDLE__: LTDC handle
+  * @retval None.
+  */
+#define __HAL_LTDC_DISABLE(__HANDLE__)   ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN))
+
+/**
+  * @brief  Enable the LTDC Layer.
+  * @param  __HANDLE__: LTDC handle
+  * @param  __LAYER__: Specify the layer to be enabled
+  *                     This parameter can be 0 or 1
+  * @retval None.
+  */
+#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__)  ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR |= (uint32_t)LTDC_LxCR_LEN)
+
+/**
+  * @brief  Disable the LTDC Layer.
+  * @param  __HANDLE__: LTDC handle
+  * @param  __LAYER__: Specify the layer to be disabled
+  *                     This parameter can be 0 or 1
+  * @retval None.
+  */
+#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR &= ~(uint32_t)LTDC_LxCR_LEN)
+
+/**
+  * @brief  Reload  Layer Configuration.
+  * @param  __HANDLE__: LTDC handle
+  * @retval None.
+  */
+#define __HAL_LTDC_RELOAD_CONFIG(__HANDLE__)   ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR)
+
+/* Interrupt & Flag management */
+/**
+  * @brief  Get the LTDC pending flags.
+  * @param  __HANDLE__: LTDC handle
+  * @param  __FLAG__: Get the specified flag.
+  *          This parameter can be any combination of the following values:
+  *            @arg LTDC_FLAG_LI: Line Interrupt flag 
+  *            @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+  *            @arg LTDC_FLAG_RR: Register Reload Interrupt Flag 
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+  * @brief  Clears the LTDC pending flags.
+  * @param  __HANDLE__: LTDC handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg LTDC_FLAG_LI: Line Interrupt flag 
+  *            @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+  *            @arg LTDC_FLAG_RR: Register Reload Interrupt Flag 
+  * @retval None
+  */
+#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+  * @brief  Enables the specified LTDC interrupts.
+  * @param  __HANDLE__: LTDC handle
+  * @param __INTERRUPT__: specifies the LTDC interrupt sources to be enabled. 
+  *          This parameter can be any combination of the following values:
+  *            @arg LTDC_IT_LI: Line Interrupt flag 
+  *            @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_IT_TE: Transfer Error interrupt flag
+  *            @arg LTDC_IT_RR: Register Reload Interrupt Flag
+  * @retval None
+  */
+#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+  * @brief  Disables the specified LTDC interrupts.
+  * @param  __HANDLE__: LTDC handle
+  * @param __INTERRUPT__: specifies the LTDC interrupt sources to be disabled. 
+  *          This parameter can be any combination of the following values:
+  *            @arg LTDC_IT_LI: Line Interrupt flag 
+  *            @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_IT_TE: Transfer Error interrupt flag
+  *            @arg LTDC_IT_RR: Register Reload Interrupt Flag
+  * @retval None
+  */
+#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified LTDC interrupt has occurred or not.
+  * @param  __HANDLE__: LTDC handle
+  * @param  __INTERRUPT__: specifies the LTDC interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg LTDC_IT_LI: Line Interrupt flag 
+  *            @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+  *            @arg LTDC_IT_TE: Transfer Error interrupt flag
+  *            @arg LTDC_IT_RR: Register Reload Interrupt Flag
+  * @retval The state of INTERRUPT (SET or RESET).
+  */
+#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup LTDC_Exported_Functions
+  * @{
+  */
+/** @addtogroup LTDC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_LineEvenCallback(LTDC_HandleTypeDef *hltdc);
+/**
+  * @}
+  */
+
+/** @addtogroup LTDC_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *****************************************************/
+void  HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc);
+/**
+  * @}
+  */
+
+/** @addtogroup LTDC_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line);
+HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc);
+/**
+  * @}
+  */
+
+/** @addtogroup LTDC_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral State functions *************************************************/
+HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc);
+uint32_t              HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/** @defgroup LTDC_Private_Types LTDC Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Variables LTDC Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Constants LTDC Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup LTDC_Private_Macros LTDC Private Macros
+  * @{
+  */
+#define LTDC_LAYER(__HANDLE__, __LAYER__)         ((LTDC_Layer_TypeDef *)((uint32_t)(((uint32_t)((__HANDLE__)->Instance)) + 0x84 + (0x80*(__LAYER__)))))
+#define IS_LTDC_LAYER(LAYER)                      ((LAYER) <= MAX_LAYER)
+#define IS_LTDC_HSPOL(HSPOL)                      (((HSPOL) == LTDC_HSPOLARITY_AL) || \
+                                                   ((HSPOL) == LTDC_HSPOLARITY_AH))
+#define IS_LTDC_VSPOL(VSPOL)                      (((VSPOL) == LTDC_VSPOLARITY_AL) || \
+                                                   ((VSPOL) == LTDC_VSPOLARITY_AH))
+#define IS_LTDC_DEPOL(DEPOL)                      (((DEPOL) ==  LTDC_DEPOLARITY_AL) || \
+                                                   ((DEPOL) ==  LTDC_DEPOLARITY_AH))
+#define IS_LTDC_PCPOL(PCPOL)                      (((PCPOL) ==  LTDC_PCPOLARITY_IPC) || \
+                                                   ((PCPOL) ==  LTDC_PCPOLARITY_IIPC))
+#define IS_LTDC_HSYNC(HSYNC)                      ((HSYNC)  <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_VSYNC(VSYNC)                      ((VSYNC)  <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AHBP(AHBP)                        ((AHBP)   <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AVBP(AVBP)                        ((AVBP)   <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AAW(AAW)                          ((AAW)    <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AAH(AAH)                          ((AAH)    <= LTDC_VERTICALSYNC)
+#define IS_LTDC_TOTALW(TOTALW)                    ((TOTALW) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_TOTALH(TOTALH)                    ((TOTALH) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_BLUEVALUE(BBLUE)                  ((BBLUE)  <= LTDC_COLOR)
+#define IS_LTDC_GREENVALUE(BGREEN)                ((BGREEN) <= LTDC_COLOR)
+#define IS_LTDC_REDVALUE(BRED)                    ((BRED)   <= LTDC_COLOR)
+#define IS_LTDC_BLENDING_FACTOR1(BlendingFactor1) (((BlendingFactor1) == LTDC_BLENDING_FACTOR1_CA) || \
+                                                   ((BlendingFactor1) == LTDC_BLENDING_FACTOR1_PAxCA))
+#define IS_LTDC_BLENDING_FACTOR2(BlendingFactor2) (((BlendingFactor2) == LTDC_BLENDING_FACTOR2_CA) || \
+                                                   ((BlendingFactor2) == LTDC_BLENDING_FACTOR2_PAxCA))
+#define IS_LTDC_PIXEL_FORMAT(Pixelformat)         (((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB8888) || ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB888)   || \
+                                                   ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB565)   || ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB1555) || \
+                                                   ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB4444) || ((Pixelformat) == LTDC_PIXEL_FORMAT_L8)       || \
+                                                   ((Pixelformat) == LTDC_PIXEL_FORMAT_AL44)     || ((Pixelformat) == LTDC_PIXEL_FORMAT_AL88))
+#define IS_LTDC_ALPHA(ALPHA)                      ((ALPHA) <= LTDC_ALPHA)
+#define IS_LTDC_HCONFIGST(HCONFIGST)              ((HCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_HCONFIGSP(HCONFIGSP)              ((HCONFIGSP) <= LTDC_STOPPOSITION)
+#define IS_LTDC_VCONFIGST(VCONFIGST)              ((VCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_VCONFIGSP(VCONFIGSP)              ((VCONFIGSP) <= LTDC_STOPPOSITION)
+#define IS_LTDC_CFBP(CFBP)                        ((CFBP) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLL(CFBLL)                      ((CFBLL) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLNBR(CFBLNBR)                  ((CFBLNBR) <= LTDC_LINE_NUMBER)
+#define IS_LTDC_LIPOS(LIPOS)                      ((LIPOS) <= 0x7FF)
+/**
+  * @}
+  */ 
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Functions LTDC Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+#endif /* STM32F746xx || STM32F756xx */
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_LTDC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_nand.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1023 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_nand.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   NAND HAL module driver.
+  *          This file provides a generic firmware to drive NAND memories mounted 
+  *          as external device.
+  *         
+  @verbatim
+  ==============================================================================
+                         ##### How to use this driver #####
+  ==============================================================================    
+    [..]
+      This driver is a generic layered driver which contains a set of APIs used to 
+      control NAND flash memories. It uses the FMC/FSMC layer functions to interface 
+      with NAND devices. This driver is used as follows:
+    
+      (+) NAND flash memory configuration sequence using the function HAL_NAND_Init() 
+          with control and timing parameters for both common and attribute spaces.
+            
+      (+) Read NAND flash memory maker and device IDs using the function
+          HAL_NAND_Read_ID(). The read information is stored in the NAND_ID_TypeDef 
+          structure declared by the function caller. 
+        
+      (+) Access NAND flash memory by read/write operations using the functions
+          HAL_NAND_Read_Page()/HAL_NAND_Read_SpareArea(), HAL_NAND_Write_Page()/HAL_NAND_Write_SpareArea()
+          to read/write page(s)/spare area(s). These functions use specific device 
+          information (Block, page size..) predefined by the user in the HAL_NAND_Info_TypeDef 
+          structure. The read/write address information is contained by the Nand_Address_Typedef
+          structure passed as parameter.
+        
+      (+) Perform NAND flash Reset chip operation using the function HAL_NAND_Reset().
+        
+      (+) Perform NAND flash erase block operation using the function HAL_NAND_Erase_Block().
+          The erase block address information is contained in the Nand_Address_Typedef 
+          structure passed as parameter.
+    
+      (+) Read the NAND flash status operation using the function HAL_NAND_Read_Status().
+        
+      (+) You can also control the NAND device by calling the control APIs HAL_NAND_ECC_Enable()/
+          HAL_NAND_ECC_Disable() to respectively enable/disable the ECC code correction
+          feature or the function HAL_NAND_GetECC() to get the ECC correction code. 
+       
+      (+) You can monitor the NAND device HAL state by calling the function
+          HAL_NAND_GetState()  
+
+    [..]
+      (@) This driver is a set of generic APIs which handle standard NAND flash operations.
+          If a NAND flash device contains different operations and/or implementations, 
+          it should be implemented separately.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+
+#ifdef HAL_NAND_MODULE_ENABLED
+
+/** @defgroup NAND NAND 
+  * @brief NAND HAL module driver
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private Constants ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/    
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup NAND_Exported_Functions NAND Exported Functions
+  * @{
+  */
+    
+/** @defgroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @brief    Initialization and Configuration functions 
+  *
+  @verbatim    
+  ==============================================================================
+            ##### NAND Initialization and de-initialization functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to initialize/de-initialize
+    the NAND memory
+  
+@endverbatim
+  * @{
+  */
+    
+/**
+  * @brief  Perform NAND memory Initialization sequence
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  ComSpace_Timing: pointer to Common space timing structure
+  * @param  AttSpace_Timing: pointer to Attribute space timing structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing)
+{
+  /* Check the NAND handle state */
+  if(hnand == NULL)
+  {
+     return HAL_ERROR;
+  }
+
+  if(hnand->State == HAL_NAND_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hnand->Lock = HAL_UNLOCKED;
+    /* Initialize the low level hardware (MSP) */
+    HAL_NAND_MspInit(hnand);
+  } 
+
+  /* Initialize NAND control Interface */
+  FMC_NAND_Init(hnand->Instance, &(hnand->Init));
+  
+  /* Initialize NAND common space timing Interface */  
+  FMC_NAND_CommonSpace_Timing_Init(hnand->Instance, ComSpace_Timing, hnand->Init.NandBank);
+  
+  /* Initialize NAND attribute space timing Interface */  
+  FMC_NAND_AttributeSpace_Timing_Init(hnand->Instance, AttSpace_Timing, hnand->Init.NandBank);
+  
+  /* Enable the NAND device */
+  __FMC_NAND_ENABLE(hnand->Instance);
+  
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Perform NAND memory De-Initialization sequence
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand)  
+{
+  /* Initialize the low level hardware (MSP) */
+  HAL_NAND_MspDeInit(hnand);
+
+  /* Configure the NAND registers with their reset values */
+  FMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank);
+
+  /* Reset the NAND controller state */
+  hnand->State = HAL_NAND_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hnand);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  NAND MSP Init
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval None
+  */
+__weak void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hnand);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NAND_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  NAND MSP DeInit
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval None
+  */
+__weak void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hnand);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NAND_MspDeInit could be implemented in the user file
+   */ 
+}
+
+
+/**
+  * @brief  This function handles NAND device interrupt request.
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval HAL status
+*/
+void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand)
+{
+  /* Check NAND interrupt Rising edge flag */
+  if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE))
+  {
+    /* NAND interrupt callback*/
+    HAL_NAND_ITCallback(hnand);
+  
+    /* Clear NAND interrupt Rising edge pending bit */
+    __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_RISING_EDGE);
+  }
+  
+  /* Check NAND interrupt Level flag */
+  if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL))
+  {
+    /* NAND interrupt callback*/
+    HAL_NAND_ITCallback(hnand);
+  
+    /* Clear NAND interrupt Level pending bit */
+    __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_LEVEL);
+  }
+
+  /* Check NAND interrupt Falling edge flag */
+  if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE))
+  {
+    /* NAND interrupt callback*/
+    HAL_NAND_ITCallback(hnand);
+  
+    /* Clear NAND interrupt Falling edge pending bit */
+    __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_FALLING_EDGE);
+  }
+  
+  /* Check NAND interrupt FIFO empty flag */
+  if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT))
+  {
+    /* NAND interrupt callback*/
+    HAL_NAND_ITCallback(hnand);
+  
+    /* Clear NAND interrupt FIFO empty pending bit */
+    __FMC_NAND_CLEAR_FLAG(hnand->Instance, FMC_FLAG_FEMPT);
+  }  
+
+}
+
+/**
+  * @brief  NAND interrupt feature callback
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval None
+  */
+__weak void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hnand);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NAND_ITCallback could be implemented in the user file
+   */
+}
+ 
+/**
+  * @}
+  */
+  
+/** @defgroup NAND_Exported_Functions_Group2 Input and Output functions 
+  * @brief    Input Output and memory control functions 
+  *
+  @verbatim    
+  ==============================================================================
+                    ##### NAND Input and Output functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to use and control the NAND 
+    memory
+  
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Read the NAND memory electronic signature
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  pNAND_ID: NAND ID structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID)
+{
+  __IO uint32_t data = 0;
+  uint32_t deviceAddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnand);  
+  
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Identify the device address */
+  deviceAddress = NAND_DEVICE;
+  
+  /* Update the NAND controller state */ 
+  hnand->State = HAL_NAND_STATE_BUSY;
+  
+  /* Send Read ID command sequence */ 	
+  *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA))  = NAND_CMD_READID;
+  *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00;
+
+  /* Read the electronic signature from NAND flash */	
+  data = *(__IO uint32_t *)deviceAddress;
+  
+  /* Return the data read */
+  pNAND_ID->Maker_Id   = ADDR_1ST_CYCLE(data);
+  pNAND_ID->Device_Id  = ADDR_2ND_CYCLE(data);
+  pNAND_ID->Third_Id   = ADDR_3RD_CYCLE(data);
+  pNAND_ID->Fourth_Id  = ADDR_4TH_CYCLE(data);
+  
+  /* Update the NAND controller state */ 
+  hnand->State = HAL_NAND_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);   
+   
+  return HAL_OK;
+}
+
+/**
+  * @brief  NAND memory reset
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand)
+{
+  uint32_t deviceAddress = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnand);
+    
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Identify the device address */  
+  deviceAddress = NAND_DEVICE;
+  
+  /* Update the NAND controller state */   
+  hnand->State = HAL_NAND_STATE_BUSY; 
+  
+  /* Send NAND reset command */  
+  *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = 0xFF;
+    
+  
+  /* Update the NAND controller state */   
+  hnand->State = HAL_NAND_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);    
+  
+  return HAL_OK;
+  
+}
+  
+/**
+  * @brief  Read Page(s) from NAND memory block 
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  pAddress : pointer to NAND address structure
+  * @param  pBuffer : pointer to destination read buffer
+  * @param  NumPageToRead : number of pages to read from block 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead)
+{   
+  __IO uint32_t index  = 0;
+  uint32_t deviceAddress = 0, size = 0, numPagesRead = 0, nandAddress = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnand); 
+  
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Identify the device address */
+  deviceAddress = NAND_DEVICE;
+
+  /* Update the NAND controller state */ 
+  hnand->State = HAL_NAND_STATE_BUSY;
+  
+  /* NAND raw address calculation */
+  nandAddress = ARRAY_ADDRESS(pAddress, hnand);
+  
+  /* Page(s) read loop */  
+  while((NumPageToRead != 0) && (nandAddress < ((hnand->Info.BlockSize) * (hnand->Info.PageSize) * (hnand->Info.ZoneSize))))
+  {	   
+    /* update the buffer size */
+    size = (hnand->Info.PageSize) + ((hnand->Info.PageSize) * numPagesRead);
+    
+    /* Send read page command sequence */
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_A;  
+   
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00; 
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress); 
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress); 
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+  
+    /* for 512 and 1 GB devices, 4th cycle is required */    
+    if(hnand->Info.BlockNbr >= 1024)
+    {
+      *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_4TH_CYCLE(nandAddress);
+    }
+  
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA))  = NAND_CMD_AREA_TRUE1;
+      
+    /* Get Data into Buffer */    
+    for(index = 0; index < size; index++)
+    {
+      *(uint8_t *)pBuffer++ = *(uint8_t *)deviceAddress;
+    }
+    
+    /* Increment read pages number */
+    numPagesRead++;
+    
+    /* Decrement pages to read */
+    NumPageToRead--;
+    
+    /* Increment the NAND address */
+    nandAddress = (uint32_t)(nandAddress + (hnand->Info.PageSize * 8));
+    
+  }
+  
+  /* Update the NAND controller state */ 
+  hnand->State = HAL_NAND_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);  
+    
+  return HAL_OK;
+
+}
+
+/**
+  * @brief  Write Page(s) to NAND memory block 
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  pAddress : pointer to NAND address structure
+  * @param  pBuffer : pointer to source buffer to write  
+  * @param  NumPageToWrite  : number of pages to write to block 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite)
+{
+  __IO uint32_t index = 0;
+  uint32_t tickstart = 0;
+  uint32_t deviceAddress = 0, size = 0, numPagesWritten = 0, nandAddress = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnand);  
+
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Identify the device address */
+  deviceAddress = NAND_DEVICE;
+  
+  /* Update the NAND controller state */ 
+  hnand->State = HAL_NAND_STATE_BUSY;
+  
+  /* NAND raw address calculation */
+  nandAddress = ARRAY_ADDRESS(pAddress, hnand);
+  
+  /* Page(s) write loop */
+  while((NumPageToWrite != 0) && (nandAddress < ((hnand->Info.BlockSize) * (hnand->Info.PageSize) * (hnand->Info.ZoneSize))))
+  {  
+    /* update the buffer size */
+    size = (hnand->Info.PageSize) + ((hnand->Info.PageSize) * numPagesWritten);
+ 
+    /* Send write page command sequence */
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_A;
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE0;
+
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00;  
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);  
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);  
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+    __DSB();
+    
+    /* for 512 and 1 GB devices, 4th cycle is required */     
+    if(hnand->Info.BlockNbr >= 1024)
+    {
+      *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_4TH_CYCLE(nandAddress);
+      __DSB();
+    }
+  
+    /* Write data to memory */
+    for(index = 0; index < size; index++)
+    {
+      *(__IO uint8_t *)deviceAddress = *(uint8_t *)pBuffer++;
+      __DSB();
+    }
+   
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
+    
+    /* Read status until NAND is ready */
+    while(HAL_NAND_Read_Status(hnand) != NAND_READY)
+    {
+      /* Get tick */
+      tickstart = HAL_GetTick();
+    
+      if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
+      {
+        return HAL_TIMEOUT; 
+      } 
+    }    
+ 
+    /* Increment written pages number */
+    numPagesWritten++;
+    
+    /* Decrement pages to write */
+    NumPageToWrite--;
+    
+    /* Increment the NAND address */
+    nandAddress = (uint32_t)(nandAddress + (hnand->Info.PageSize * 8));
+  }
+  
+  /* Update the NAND controller state */ 
+  hnand->State = HAL_NAND_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);      
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Read Spare area(s) from NAND memory 
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  pAddress : pointer to NAND address structure
+  * @param  pBuffer: pointer to source buffer to write  
+  * @param  NumSpareAreaToRead: Number of spare area to read  
+  * @retval HAL status
+*/
+HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead)
+{
+  __IO uint32_t index = 0; 
+  uint32_t deviceAddress = 0, size = 0, numSpareAreaRead = 0, nandAddress = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnand);  
+  
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Identify the device address */
+  deviceAddress = NAND_DEVICE;
+  
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+  
+  /* NAND raw address calculation */
+  nandAddress = ARRAY_ADDRESS(pAddress, hnand);    
+  
+  /* Spare area(s) read loop */ 
+  while((NumSpareAreaToRead != 0) && (nandAddress < ((hnand->Info.BlockSize) * (hnand->Info.SpareAreaSize) * (hnand->Info.ZoneSize))))
+  {     
+    
+    /* update the buffer size */
+    size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * numSpareAreaRead);   
+
+    /* Send read spare area command sequence */     
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_C;
+    
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00; 
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);     
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);     
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress);
+  
+    /* for 512 and 1 GB devices, 4th cycle is required */    
+    if(hnand->Info.BlockNbr >= 1024)
+    {
+      *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_4TH_CYCLE(nandAddress);
+    } 
+
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;    
+    
+    /* Get Data into Buffer */
+    for(index = 0; index < size; index++)
+    {
+      *(uint8_t *)pBuffer++ = *(uint8_t *)deviceAddress;
+    }
+    
+    /* Increment read spare areas number */
+    numSpareAreaRead++;
+    
+    /* Decrement spare areas to read */
+    NumSpareAreaToRead--;
+    
+    /* Increment the NAND address */
+    nandAddress = (uint32_t)(nandAddress + (hnand->Info.SpareAreaSize));
+  }
+  
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);     
+
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Write Spare area(s) to NAND memory 
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  pAddress : pointer to NAND address structure
+  * @param  pBuffer : pointer to source buffer to write  
+  * @param  NumSpareAreaTowrite  : number of spare areas to write to block
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite)
+{
+  __IO uint32_t index = 0;
+  uint32_t tickstart = 0;
+  uint32_t deviceAddress = 0, size = 0, numSpareAreaWritten = 0, nandAddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnand); 
+  
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Identify the device address */
+  deviceAddress = NAND_DEVICE;
+  
+  /* Update the FMC_NAND controller state */
+  hnand->State = HAL_NAND_STATE_BUSY;  
+  
+  /* NAND raw address calculation */
+  nandAddress = ARRAY_ADDRESS(pAddress, hnand);  
+  
+  /* Spare area(s) write loop */
+  while((NumSpareAreaTowrite != 0) && (nandAddress < ((hnand->Info.BlockSize) * (hnand->Info.SpareAreaSize) * (hnand->Info.ZoneSize))))
+  {  
+    /* update the buffer size */
+    size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * numSpareAreaWritten);
+
+    /* Send write Spare area command sequence */
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_AREA_C;
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE0;
+
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = 0x00;  
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(nandAddress);  
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(nandAddress);  
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(nandAddress); 
+    __DSB();
+    /* for 512 and 1 GB devices, 4th cycle is required */     
+    if(hnand->Info.BlockNbr >= 1024)
+    {
+      *(__IO uint8_t *)((uint32_t)(deviceAddress | ADDR_AREA)) = ADDR_4TH_CYCLE(nandAddress);
+      __DSB();
+    }
+  
+    /* Write data to memory */
+    for(index = 0; index < size; index++)
+    {
+      *(__IO uint8_t *)deviceAddress = *(uint8_t *)pBuffer++;
+      __DSB();
+    }
+   
+    *(__IO uint8_t *)((uint32_t)(deviceAddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
+    __DSB();
+   
+    /* Read status until NAND is ready */
+    while(HAL_NAND_Read_Status(hnand) != NAND_READY)
+    {
+      /* Get tick */
+      tickstart = HAL_GetTick();
+    
+      if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
+      {
+        return HAL_TIMEOUT; 
+      }
+    }
+
+    /* Increment written spare areas number */
+    numSpareAreaWritten++;
+    
+    /* Decrement spare areas to write */
+    NumSpareAreaTowrite--;
+    
+    /* Increment the NAND address */
+    nandAddress = (uint32_t)(nandAddress + (hnand->Info.PageSize));
+  }
+
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);
+    
+  return HAL_OK;  
+}
+
+/**
+  * @brief  NAND memory Block erase 
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  pAddress : pointer to NAND address structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
+{
+  uint32_t DeviceAddress = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnand);
+  
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Identify the device address */
+  DeviceAddress = NAND_DEVICE;
+  
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_BUSY;  
+  
+  /* Send Erase block command sequence */
+  *(__IO uint8_t *)((uint32_t)(DeviceAddress | CMD_AREA)) = NAND_CMD_ERASE0;
+
+  *(__IO uint8_t *)((uint32_t)(DeviceAddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+  *(__IO uint8_t *)((uint32_t)(DeviceAddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+  *(__IO uint8_t *)((uint32_t)(DeviceAddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+  __DSB();
+  
+  /* for 512 and 1 GB devices, 4th cycle is required */     
+  if(hnand->Info.BlockNbr >= 1024)
+  {
+    *(__IO uint8_t *)((uint32_t)(DeviceAddress | ADDR_AREA)) = ADDR_4TH_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
+    __DSB();
+  }  
+		
+  *(__IO uint8_t *)((uint32_t)(DeviceAddress | CMD_AREA)) = NAND_CMD_ERASE1; 
+  __DSB();
+  
+  /* Update the NAND controller state */
+  hnand->State = HAL_NAND_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnand);    
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  NAND memory read status 
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval NAND status
+  */
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand)
+{
+  uint32_t data = 0;
+  uint32_t DeviceAddress = 0;
+  
+  /* Identify the device address */
+   DeviceAddress = NAND_DEVICE;
+
+  /* Send Read status operation command */
+  *(__IO uint8_t *)((uint32_t)(DeviceAddress | CMD_AREA)) = NAND_CMD_STATUS;
+  
+  /* Read status register data */
+  data = *(__IO uint8_t *)DeviceAddress;
+
+  /* Return the status */
+  if((data & NAND_ERROR) == NAND_ERROR)
+  {
+    return NAND_ERROR;
+  } 
+  else if((data & NAND_READY) == NAND_READY)
+  {
+    return NAND_READY;
+  }
+
+  return NAND_BUSY; 
+}
+
+/**
+  * @brief  Increment the NAND memory address
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param pAddress: pointer to NAND address structure
+  * @retval The new status of the increment address operation. It can be:
+  *           - NAND_VALID_ADDRESS: When the new address is valid address
+  *           - NAND_INVALID_ADDRESS: When the new address is invalid address
+  */
+uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
+{
+  uint32_t status = NAND_VALID_ADDRESS;
+ 
+  /* Increment page address */
+  pAddress->Page++;
+
+  /* Check NAND address is valid */
+  if(pAddress->Page == hnand->Info.BlockSize)
+  {
+    pAddress->Page = 0;
+    pAddress->Block++;
+    
+    if(pAddress->Block == hnand->Info.ZoneSize)
+    {
+      pAddress->Block = 0;
+      pAddress->Zone++;
+
+      if(pAddress->Zone == (hnand->Info.ZoneSize/ hnand->Info.BlockNbr))
+      {
+        status = NAND_INVALID_ADDRESS;
+      }
+    }
+  } 
+  
+  return (status);
+}
+/**
+  * @}
+  */
+
+/** @defgroup NAND_Exported_Functions_Group3 Peripheral Control functions 
+ *  @brief   management functions 
+ *
+@verbatim   
+  ==============================================================================
+                         ##### NAND Control functions #####
+  ==============================================================================  
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the NAND interface.
+
+@endverbatim
+  * @{
+  */ 
+
+    
+/**
+  * @brief  Enables dynamically NAND ECC feature.
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval HAL status
+  */    
+HAL_StatusTypeDef  HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand)
+{
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Update the NAND state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+   
+  /* Enable ECC feature */
+  FMC_NAND_ECC_Enable(hnand->Instance, hnand->Init.NandBank);
+  
+  /* Update the NAND state */
+  hnand->State = HAL_NAND_STATE_READY;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Disables dynamically FMC_NAND ECC feature.
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval HAL status
+  */  
+HAL_StatusTypeDef  HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand)  
+{
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+
+  /* Update the NAND state */
+  hnand->State = HAL_NAND_STATE_BUSY;
+    
+  /* Disable ECC feature */
+  FMC_NAND_ECC_Disable(hnand->Instance, hnand->Init.NandBank);
+  
+  /* Update the NAND state */
+  hnand->State = HAL_NAND_STATE_READY;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Disables dynamically NAND ECC feature.
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @param  ECCval: pointer to ECC value 
+  * @param  Timeout: maximum timeout to wait    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Check the NAND controller state */
+  if(hnand->State == HAL_NAND_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Update the NAND state */
+  hnand->State = HAL_NAND_STATE_BUSY;  
+   
+  /* Get NAND ECC value */
+  status = FMC_NAND_GetECC(hnand->Instance, ECCval, hnand->Init.NandBank, Timeout);
+  
+  /* Update the NAND state */
+  hnand->State = HAL_NAND_STATE_READY;
+
+  return status;  
+}
+                      
+/**
+  * @}
+  */
+  
+    
+/** @defgroup NAND_Exported_Functions_Group4 Peripheral State functions  
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+  ==============================================================================
+                         ##### NAND State functions #####
+  ==============================================================================  
+  [..]
+    This subsection permits to get in run-time the status of the NAND controller 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  return the NAND state
+  * @param  hnand: pointer to a NAND_HandleTypeDef structure that contains
+  *                the configuration information for NAND module.
+  * @retval HAL state
+  */
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand)
+{
+  return hnand->State;
+}
+
+/**
+  * @}
+  */  
+
+/**
+  * @}
+  */
+
+#endif /* HAL_NAND_MODULE_ENABLED  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_nand.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,301 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_nand.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of NAND HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_NAND_H
+#define __STM32F7xx_HAL_NAND_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_fmc.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup NAND
+  * @{
+  */ 
+
+/* Exported typedef ----------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Types NAND Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  HAL NAND State structures definition
+  */
+typedef enum
+{
+  HAL_NAND_STATE_RESET     = 0x00,  /*!< NAND not yet initialized or disabled */
+  HAL_NAND_STATE_READY     = 0x01,  /*!< NAND initialized and ready for use   */
+  HAL_NAND_STATE_BUSY      = 0x02,  /*!< NAND internal process is ongoing     */
+  HAL_NAND_STATE_ERROR     = 0x03   /*!< NAND error state                     */
+}HAL_NAND_StateTypeDef;
+   
+/** 
+  * @brief  NAND Memory electronic signature Structure definition
+  */
+typedef struct
+{
+  /*<! NAND memory electronic signature maker and device IDs */
+
+  uint8_t Maker_Id; 
+
+  uint8_t Device_Id;
+
+  uint8_t Third_Id;
+
+  uint8_t Fourth_Id;
+}NAND_IDTypeDef;
+
+/** 
+  * @brief  NAND Memory address Structure definition
+  */
+typedef struct 
+{
+  uint16_t Page;   /*!< NAND memory Page address  */
+
+  uint16_t Zone;   /*!< NAND memory Zone address  */
+
+  uint16_t Block;  /*!< NAND memory Block address */
+
+}NAND_AddressTypeDef;
+
+/** 
+  * @brief  NAND Memory info Structure definition
+  */ 
+typedef struct
+{
+  uint32_t PageSize;       /*!< NAND memory page (without spare area) size measured in K. bytes */
+
+  uint32_t SpareAreaSize;  /*!< NAND memory spare area size measured in K. bytes                */
+
+  uint32_t BlockSize;      /*!< NAND memory block size number of pages                          */
+
+  uint32_t BlockNbr;       /*!< NAND memory number of blocks                                    */
+
+  uint32_t ZoneSize;       /*!< NAND memory zone size measured in number of blocks              */
+}NAND_InfoTypeDef;
+
+/** 
+  * @brief  NAND handle Structure definition
+  */   
+typedef struct
+{
+  FMC_NAND_TypeDef             *Instance;  /*!< Register base address                        */
+  
+  FMC_NAND_InitTypeDef         Init;       /*!< NAND device control configuration parameters */
+
+  HAL_LockTypeDef              Lock;       /*!< NAND locking object                          */
+
+  __IO HAL_NAND_StateTypeDef   State;      /*!< NAND device access state                     */
+
+  NAND_InfoTypeDef             Info;       /*!< NAND characteristic information structure    */
+}NAND_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Macros NAND Exported Macros
+ * @{
+ */ 
+
+/** @brief Reset NAND handle state
+  * @param  __HANDLE__: specifies the NAND handle.
+  * @retval None
+  */
+#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NAND_Exported_Functions NAND Exported Functions
+  * @{
+  */
+    
+/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef  HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
+HAL_StatusTypeDef  HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
+void               HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
+void               HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
+void               HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
+void               HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
+
+/**
+  * @}
+  */
+  
+/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions 
+  * @{
+  */
+
+/* IO operation functions  ****************************************************/
+HAL_StatusTypeDef  HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);
+HAL_StatusTypeDef  HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef  HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead);
+HAL_StatusTypeDef  HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite);
+HAL_StatusTypeDef  HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
+HAL_StatusTypeDef  HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
+HAL_StatusTypeDef  HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+uint32_t           HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+uint32_t           HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+
+/**
+  * @}
+  */
+
+/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions 
+  * @{
+  */
+
+/* NAND Control functions  ****************************************************/
+HAL_StatusTypeDef  HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef  HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef  HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout);
+
+/**
+  * @}
+  */
+    
+/** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions 
+  * @{
+  */
+/* NAND State functions *******************************************************/
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
+uint32_t              HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup NAND_Private_Constants NAND Private Constants
+  * @{
+  */
+#define NAND_DEVICE                ((uint32_t)0x80000000) 
+#define NAND_WRITE_TIMEOUT         ((uint32_t)0x01000000)
+
+#define CMD_AREA                   ((uint32_t)(1<<16))  /* A16 = CLE high */
+#define ADDR_AREA                  ((uint32_t)(1<<17))  /* A17 = ALE high */
+
+#define NAND_CMD_AREA_A            ((uint8_t)0x00)
+#define NAND_CMD_AREA_B            ((uint8_t)0x01)
+#define NAND_CMD_AREA_C            ((uint8_t)0x50)
+#define NAND_CMD_AREA_TRUE1        ((uint8_t)0x30)
+
+#define NAND_CMD_WRITE0            ((uint8_t)0x80)
+#define NAND_CMD_WRITE_TRUE1       ((uint8_t)0x10)
+#define NAND_CMD_ERASE0            ((uint8_t)0x60)
+#define NAND_CMD_ERASE1            ((uint8_t)0xD0)  
+#define NAND_CMD_READID            ((uint8_t)0x90)
+#define NAND_CMD_STATUS            ((uint8_t)0x70)
+#define NAND_CMD_LOCK_STATUS       ((uint8_t)0x7A)
+#define NAND_CMD_RESET             ((uint8_t)0xFF)
+
+/* NAND memory status */
+#define NAND_VALID_ADDRESS         ((uint32_t)0x00000100)
+#define NAND_INVALID_ADDRESS       ((uint32_t)0x00000200)
+#define NAND_TIMEOUT_ERROR         ((uint32_t)0x00000400)
+#define NAND_BUSY                  ((uint32_t)0x00000000)
+#define NAND_ERROR                 ((uint32_t)0x00000001)
+#define NAND_READY                 ((uint32_t)0x00000040)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup NAND_Private_Macros NAND Private Macros
+  * @{
+  */
+
+/**
+  * @brief  NAND memory address computation.
+  * @param  __ADDRESS__: NAND memory address.
+  * @param  __HANDLE__ : NAND handle.
+  * @retval NAND Raw address value
+  */
+#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
+                         (((__ADDRESS__)->Block + (((__ADDRESS__)->Zone) * ((__HANDLE__)->Info.ZoneSize)))* ((__HANDLE__)->Info.BlockSize)))
+
+/**
+  * @brief  NAND memory address cycling.
+  * @param  __ADDRESS__: NAND memory address.
+  * @retval NAND address cycling value.
+  */
+#define ADDR_1ST_CYCLE(__ADDRESS__)       (uint8_t)(__ADDRESS__)              /* 1st addressing cycle */
+#define ADDR_2ND_CYCLE(__ADDRESS__)       (uint8_t)((__ADDRESS__) >> 8)       /* 2nd addressing cycle */
+#define ADDR_3RD_CYCLE(__ADDRESS__)       (uint8_t)((__ADDRESS__) >> 16)      /* 3rd addressing cycle */
+#define ADDR_4TH_CYCLE(__ADDRESS__)       (uint8_t)((__ADDRESS__) >> 24)      /* 4th addressing cycle */
+/**
+  * @}
+  */
+    
+/**
+  * @}
+  */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_NAND_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_nor.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1024 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_nor.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   NOR HAL module driver.
+  *          This file provides a generic firmware to drive NOR memories mounted 
+  *          as external device.
+  *         
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================       
+    [..]
+      This driver is a generic layered driver which contains a set of APIs used to 
+      control NOR flash memories. It uses the FMC layer functions to interface 
+      with NOR devices. This driver is used as follows:
+    
+      (+) NOR flash memory configuration sequence using the function HAL_NOR_Init() 
+          with control and timing parameters for both normal and extended mode.
+            
+      (+) Read NOR flash memory manufacturer code and device IDs using the function
+          HAL_NOR_Read_ID(). The read information is stored in the NOR_ID_TypeDef 
+          structure declared by the function caller. 
+        
+      (+) Access NOR flash memory by read/write data unit operations using the functions
+          HAL_NOR_Read(), HAL_NOR_Program().
+        
+      (+) Perform NOR flash erase block/chip operations using the functions 
+          HAL_NOR_Erase_Block() and HAL_NOR_Erase_Chip().
+        
+      (+) Read the NOR flash CFI (common flash interface) IDs using the function
+          HAL_NOR_Read_CFI(). The read information is stored in the NOR_CFI_TypeDef
+          structure declared by the function caller.
+        
+      (+) You can also control the NOR device by calling the control APIs HAL_NOR_WriteOperation_Enable()/
+          HAL_NOR_WriteOperation_Disable() to respectively enable/disable the NOR write operation  
+       
+      (+) You can monitor the NOR device HAL state by calling the function
+          HAL_NOR_GetState() 
+    [..]
+     (@) This driver is a set of generic APIs which handle standard NOR flash operations.
+         If a NOR flash device contains different operations and/or implementations, 
+         it should be implemented separately.
+
+     *** NOR HAL driver macros list ***
+     ============================================= 
+     [..]
+       Below the list of most used macros in NOR HAL driver.
+       
+      (+) NOR_WRITE : NOR memory write data to specified address
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup NOR NOR
+  * @brief NOR driver modules
+  * @{
+  */
+#ifdef HAL_NOR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+      
+/** @defgroup NOR_Private_Defines NOR Private Defines
+  * @{
+  */
+
+/* Constants to define address to set to write a command */
+#define NOR_CMD_ADDRESS_FIRST                 (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_FIRST_CFI             (uint16_t)0x0055
+#define NOR_CMD_ADDRESS_SECOND                (uint16_t)0x02AA
+#define NOR_CMD_ADDRESS_THIRD                 (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_FOURTH                (uint16_t)0x0555
+#define NOR_CMD_ADDRESS_FIFTH                 (uint16_t)0x02AA
+#define NOR_CMD_ADDRESS_SIXTH                 (uint16_t)0x0555
+
+/* Constants to define data to program a command */
+#define NOR_CMD_DATA_READ_RESET               (uint16_t)0x00F0
+#define NOR_CMD_DATA_FIRST                    (uint16_t)0x00AA
+#define NOR_CMD_DATA_SECOND                   (uint16_t)0x0055
+#define NOR_CMD_DATA_AUTO_SELECT              (uint16_t)0x0090
+#define NOR_CMD_DATA_PROGRAM                  (uint16_t)0x00A0
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD   (uint16_t)0x0080
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH  (uint16_t)0x00AA
+#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH   (uint16_t)0x0055
+#define NOR_CMD_DATA_CHIP_ERASE               (uint16_t)0x0010
+#define NOR_CMD_DATA_CFI                      (uint16_t)0x0098
+
+#define NOR_CMD_DATA_BUFFER_AND_PROG          (uint8_t)0x25
+#define NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM  (uint8_t)0x29
+#define NOR_CMD_DATA_BLOCK_ERASE              (uint8_t)0x30
+
+/* Mask on NOR STATUS REGISTER */
+#define NOR_MASK_STATUS_DQ5                   (uint16_t)0x0020
+#define NOR_MASK_STATUS_DQ6                   (uint16_t)0x0040
+
+/**
+  * @}
+  */
+      
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup NOR_Exported_Functions NOR Exported Functions
+  * @{
+  */
+
+/** @defgroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @brief    Initialization and Configuration functions 
+  *
+  @verbatim    
+  ==============================================================================
+           ##### NOR Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to initialize/de-initialize
+    the NOR memory
+  
+@endverbatim
+  * @{
+  */
+    
+/**
+  * @brief  Perform the NOR memory Initialization sequence
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  Timing: pointer to NOR control timing structure 
+  * @param  ExtTiming: pointer to NOR extended mode timing structure    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming)
+{
+  /* Check the NOR handle parameter */
+  if(hnor == NULL)
+  {
+     return HAL_ERROR;
+  }
+  
+  if(hnor->State == HAL_NOR_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hnor->Lock = HAL_UNLOCKED;
+    /* Initialize the low level hardware (MSP) */
+    HAL_NOR_MspInit(hnor);
+  }
+  
+  /* Initialize NOR control Interface */
+  FMC_NORSRAM_Init(hnor->Instance, &(hnor->Init));
+
+  /* Initialize NOR timing Interface */
+  FMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank); 
+
+  /* Initialize NOR extended mode timing Interface */
+  FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode);
+
+  /* Enable the NORSRAM device */
+  __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank);
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY; 
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Perform NOR memory De-Initialization sequence
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor)  
+{
+  /* De-Initialize the low level hardware (MSP) */
+  HAL_NOR_MspDeInit(hnor);
+ 
+  /* Configure the NOR registers with their reset values */
+  FMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank);
+  
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hnor);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  NOR MSP Init
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval None
+  */
+__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hnor);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NOR_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  NOR MSP DeInit
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval None
+  */
+__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hnor);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NOR_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  NOR MSP Wait for Ready/Busy signal
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  Timeout: Maximum timeout value
+  * @retval None
+  */
+__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hnor);
+  UNUSED(Timeout);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_NOR_MspWait could be implemented in the user file
+   */ 
+}
+  
+/**
+  * @}
+  */
+
+/** @defgroup NOR_Exported_Functions_Group2 Input and Output functions 
+  * @brief    Input Output and memory control functions 
+  *
+  @verbatim    
+  ==============================================================================
+                ##### NOR Input and Output functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to use and control the NOR memory
+  
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Read NOR flash IDs
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  pNOR_ID : pointer to NOR ID structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID)
+{
+  uint32_t deviceaddress = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }  
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Send read ID command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_AUTO_SELECT);
+
+  /* Read the NOR IDs */
+  pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, MC_ADDRESS);
+  pNOR_ID->Device_Code1      = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, DEVICE_CODE1_ADDR);
+  pNOR_ID->Device_Code2      = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, DEVICE_CODE2_ADDR);
+  pNOR_ID->Device_Code3      = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, DEVICE_CODE3_ADDR);
+  
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);   
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the NOR memory to Read mode.
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor)
+{
+  uint32_t deviceaddress = 0;  
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }  
+  
+  NOR_WRITE(deviceaddress, NOR_CMD_DATA_READ_RESET);
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);   
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Read data from NOR memory 
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  pAddress: pointer to Device address
+  * @param  pData : pointer to read data  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
+{
+  uint32_t deviceaddress = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  } 
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Send read data command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); 
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);  
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_READ_RESET);
+
+  /* Read the data */
+  *pData = *(__IO uint32_t *)(uint32_t)pAddress;
+  
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Program data to NOR memory 
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  pAddress: Device address
+  * @param  pData : pointer to the data to write   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
+{
+  uint32_t deviceaddress = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  } 
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Send program data command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM);
+
+  /* Write the data */
+  NOR_WRITE(pAddress, *pData);
+  
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Reads a half-word buffer from the NOR memory.
+  * @param  hnor: pointer to the NOR handle
+  * @param  uwAddress: NOR memory internal address to read from.
+  * @param  pData: pointer to the buffer that receives the data read from the 
+  *         NOR memory.
+  * @param  uwBufferSize : number of Half word to read.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
+{
+  uint32_t deviceaddress = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }  
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Send read data command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST); 
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);  
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_READ_RESET);
+  
+  /* Read buffer */
+  while( uwBufferSize > 0) 
+  {
+    *pData++ = *(__IO uint16_t *)uwAddress;
+    uwAddress += 2;
+    uwBufferSize--;
+  } 
+  
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Writes a half-word buffer to the NOR memory. This function must be used 
+            only with S29GL128P NOR memory. 
+  * @param  hnor: pointer to the NOR handle
+  * @param  uwAddress: NOR memory internal start write address 
+  * @param  pData: pointer to source data buffer. 
+  * @param  uwBufferSize: Size of the buffer to write
+  * @retval HAL status
+  */ 
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
+{
+  uint16_t * p_currentaddress = (uint16_t *)NULL;
+  uint16_t * p_endaddress = (uint16_t *)NULL;
+  uint32_t lastloadedaddress = 0, deviceaddress = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }  
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Initialize variables */
+  p_currentaddress  = (uint16_t*)((uint32_t)(uwAddress));
+  p_endaddress      = p_currentaddress + (uwBufferSize-1);
+  lastloadedaddress = (uint32_t)(uwAddress);
+
+  /* Issue unlock command sequence */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND); 
+
+  /* Write Buffer Load Command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG); 
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, uwAddress), (uwBufferSize - 1)); 
+
+  /* Load Data into NOR Buffer */
+  while(p_currentaddress <= p_endaddress)
+  {
+    /* Store last loaded address & data value (for polling) */
+     lastloadedaddress = (uint32_t)p_currentaddress;
+ 
+    NOR_WRITE(p_currentaddress, *pData++);
+    
+    p_currentaddress ++; 
+  }
+
+  NOR_WRITE((uint32_t)(lastloadedaddress), NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM);
+  
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK; 
+  
+}
+
+/**
+  * @brief  Erase the specified block of the NOR memory 
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  BlockAddress : Block to erase address 
+  * @param  Address: Device address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address)
+{
+  uint32_t deviceaddress = 0;
+
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Send block erase command sequence */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
+  NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE);
+
+  /* Check the NOR memory status and update the controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+    
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK;
+ 
+}
+
+/**
+  * @brief  Erase the entire NOR chip.
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  Address : Device address  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address)
+{
+  uint32_t deviceaddress = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;  
+    
+  /* Send NOR chip erase command sequence */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);  
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SIXTH), NOR_CMD_DATA_CHIP_ERASE);
+  
+  /* Check the NOR memory status and update the controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+    
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Read NOR flash CFI IDs
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @param  pNOR_CFI : pointer to NOR CFI IDs structure  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI)
+{
+  uint32_t deviceaddress = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+  
+  /* Check the NOR controller state */
+  if(hnor->State == HAL_NOR_STATE_BUSY)
+  {
+     return HAL_BUSY;
+  }
+  
+  /* Select the NOR device address */
+  if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS1;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS2;
+  }
+  else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
+  {
+    deviceaddress = NOR_MEMORY_ADRESS3;
+  }
+  else /* FMC_NORSRAM_BANK4 */
+  {
+    deviceaddress = NOR_MEMORY_ADRESS4;
+  }  
+    
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+  
+  /* Send read CFI query command */
+  NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
+
+  /* read the NOR CFI information */
+  pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, CFI1_ADDRESS);
+  pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, CFI2_ADDRESS);
+  pNOR_CFI->CFI_3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, CFI3_ADDRESS);
+  pNOR_CFI->CFI_4 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, CFI4_ADDRESS);
+
+  /* Check the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor);
+  
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup NOR_Exported_Functions_Group3 NOR Control functions
+ *  @brief   management functions 
+ *
+@verbatim   
+  ==============================================================================
+                        ##### NOR Control functions #####
+  ==============================================================================
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the NOR interface.
+
+@endverbatim
+  * @{
+  */
+    
+/**
+  * @brief  Enables dynamically NOR write operation.
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor)
+{
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Enable write operation */
+  FMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank); 
+  
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor); 
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Disables dynamically NOR write operation.
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor)
+{
+  /* Process Locked */
+  __HAL_LOCK(hnor);
+
+  /* Update the SRAM controller state */
+  hnor->State = HAL_NOR_STATE_BUSY;
+    
+  /* Disable write operation */
+  FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank); 
+  
+  /* Update the NOR controller state */
+  hnor->State = HAL_NOR_STATE_PROTECTED;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hnor); 
+  
+  return HAL_OK;  
+}
+
+/**
+  * @}
+  */  
+  
+/** @defgroup NOR_Exported_Functions_Group4 NOR State functions 
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### NOR State functions #####
+  ==============================================================================  
+  [..]
+    This subsection permits to get in run-time the status of the NOR controller 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  return the NOR controller state
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.
+  * @retval NOR controller state
+  */
+HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor)
+{
+  return hnor->State;
+}
+
+/**
+  * @brief  Returns the NOR operation status.
+  * @param  hnor: pointer to a NOR_HandleTypeDef structure that contains
+  *                the configuration information for NOR module.   
+  * @param  Address: Device address
+  * @param  Timeout: NOR programming Timeout
+  * @retval NOR_Status: The returned value can be: HAL_NOR_STATUS_SUCCESS, HAL_NOR_STATUS_ERROR
+  *         or HAL_NOR_STATUS_TIMEOUT
+  */
+HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout)
+{ 
+  HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING;
+  uint16_t tmpSR1 = 0, tmpSR2 = 0;
+  uint32_t tickstart = 0;
+
+  /* Poll on NOR memory Ready/Busy signal ------------------------------------*/
+  HAL_NOR_MspWait(hnor, Timeout);
+  
+  /* Get the NOR memory operation status -------------------------------------*/
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  while((status != HAL_NOR_STATUS_SUCCESS ) && (status != HAL_NOR_STATUS_TIMEOUT))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        status = HAL_NOR_STATUS_TIMEOUT; 
+      } 
+    } 
+
+    /* Read NOR status register (DQ6 and DQ5) */
+    tmpSR1 = *(__IO uint16_t *)Address;
+    tmpSR2 = *(__IO uint16_t *)Address;
+
+    /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS  */
+    if((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6)) 
+    {
+      return HAL_NOR_STATUS_SUCCESS ;
+    }
+    
+    if((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+    {
+      status = HAL_NOR_STATUS_ONGOING;
+    }
+    
+    tmpSR1 = *(__IO uint16_t *)Address;
+    tmpSR2 = *(__IO uint16_t *)Address;
+
+    /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS  */
+    if((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6)) 
+    {
+      return HAL_NOR_STATUS_SUCCESS;
+    }
+    if((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
+    {
+      return HAL_NOR_STATUS_ERROR;
+    } 
+  }
+
+  /* Return the operation status */
+  return status;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* HAL_NOR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_nor.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,299 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_nor.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of NOR HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_NOR_H
+#define __STM32F7xx_HAL_NOR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_fmc.h"
+
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup NOR
+  * @{
+  */ 
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup NOR_Exported_Types NOR Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  HAL SRAM State structures definition  
+  */ 
+typedef enum
+{  
+  HAL_NOR_STATE_RESET             = 0x00,  /*!< NOR not yet initialized or disabled  */
+  HAL_NOR_STATE_READY             = 0x01,  /*!< NOR initialized and ready for use    */
+  HAL_NOR_STATE_BUSY              = 0x02,  /*!< NOR internal processing is ongoing   */
+  HAL_NOR_STATE_ERROR             = 0x03,  /*!< NOR error state                      */
+  HAL_NOR_STATE_PROTECTED         = 0x04   /*!< NOR NORSRAM device write protected   */
+}HAL_NOR_StateTypeDef;
+
+/**
+  * @brief  FMC NOR Status typedef
+  */
+typedef enum
+{
+  HAL_NOR_STATUS_SUCCESS  = 0,
+  HAL_NOR_STATUS_ONGOING,
+  HAL_NOR_STATUS_ERROR,
+  HAL_NOR_STATUS_TIMEOUT
+}HAL_NOR_StatusTypeDef;
+
+/**
+  * @brief  FMC NOR ID typedef
+  */
+typedef struct
+{
+  uint16_t Manufacturer_Code;  /*!< Defines the device's manufacturer code used to identify the memory       */
+
+  uint16_t Device_Code1;
+
+  uint16_t Device_Code2;
+
+  uint16_t Device_Code3;       /*!< Defines the device's codes used to identify the memory. 
+                                    These codes can be accessed by performing read operations with specific 
+                                    control signals and addresses set.They can also be accessed by issuing 
+                                    an Auto Select command                                                   */
+}NOR_IDTypeDef;
+
+/**
+  * @brief  FMC NOR CFI typedef
+  */
+typedef struct
+{
+  /*!< Defines the information stored in the memory's Common flash interface
+       which contains a description of various electrical and timing parameters, 
+       density information and functions supported by the memory                   */
+
+  uint16_t CFI_1;
+
+  uint16_t CFI_2;
+
+  uint16_t CFI_3;
+
+  uint16_t CFI_4;
+}NOR_CFITypeDef;
+
+/** 
+  * @brief  NOR handle Structure definition
+  */ 
+typedef struct
+{
+  FMC_NORSRAM_TypeDef           *Instance;    /*!< Register base address                        */
+
+  FMC_NORSRAM_EXTENDED_TypeDef  *Extended;    /*!< Extended mode register base address          */
+
+  FMC_NORSRAM_InitTypeDef       Init;         /*!< NOR device control configuration parameters  */
+
+  HAL_LockTypeDef               Lock;         /*!< NOR locking object                           */
+
+  __IO HAL_NOR_StateTypeDef     State;        /*!< NOR device access state                      */
+
+}NOR_HandleTypeDef;
+/**
+  * @}
+  */
+  
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup NOR_Exported_Macros NOR Exported Macros
+  * @{
+  */
+/** @brief Reset NOR handle state
+  * @param  __HANDLE__: specifies the NOR handle.
+  * @retval None
+  */
+#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET)
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NOR_Exported_Functions NOR Exported Functions
+  * @{
+  */
+
+/** @addtogroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @addtogroup NOR_Exported_Functions_Group2 Input and Output functions 
+  * @{
+  */
+
+/* I/O operation functions  ***************************************************/
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID);
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI);
+/**
+  * @}
+  */
+  
+/** @addtogroup NOR_Exported_Functions_Group3 NOR Control functions 
+  * @{
+  */
+
+/* NOR Control functions  *****************************************************/
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor);
+/**
+  * @}
+  */
+  
+/** @addtogroup NOR_Exported_Functions_Group4 NOR State functions 
+  * @{
+  */
+
+/* NOR State functions ********************************************************/
+HAL_NOR_StateTypeDef  HAL_NOR_GetState(NOR_HandleTypeDef *hnor);
+HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout);
+/**
+  * @}
+  */
+    
+/**
+  * @}
+  */
+  
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup NOR_Private_Constants NOR Private Constants
+  * @{
+  */
+/* NOR device IDs addresses */
+#define MC_ADDRESS               ((uint16_t)0x0000)
+#define DEVICE_CODE1_ADDR        ((uint16_t)0x0001)
+#define DEVICE_CODE2_ADDR        ((uint16_t)0x000E)
+#define DEVICE_CODE3_ADDR        ((uint16_t)0x000F)
+
+/* NOR CFI IDs addresses */
+#define CFI1_ADDRESS             ((uint16_t)0x61)
+#define CFI2_ADDRESS             ((uint16_t)0x62)
+#define CFI3_ADDRESS             ((uint16_t)0x63)
+#define CFI4_ADDRESS             ((uint16_t)0x64)
+
+/* NOR operation wait timeout */
+#define NOR_TMEOUT               ((uint16_t)0xFFFF)
+   
+/* NOR memory data width */
+#define NOR_MEMORY_8B            ((uint8_t)0x0)
+#define NOR_MEMORY_16B           ((uint8_t)0x1)
+
+/* NOR memory device read/write start address */
+#define NOR_MEMORY_ADRESS1       ((uint32_t)0x60000000)
+#define NOR_MEMORY_ADRESS2       ((uint32_t)0x64000000)
+#define NOR_MEMORY_ADRESS3       ((uint32_t)0x68000000)
+#define NOR_MEMORY_ADRESS4       ((uint32_t)0x6C000000)
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup NOR_Private_Macros NOR Private Macros
+  * @{
+  */
+/**
+  * @brief  NOR memory address shifting.
+  * @param  __NOR_ADDRESS: NOR base address 
+  * @param  __NOR_MEMORY_WIDTH_: NOR memory width
+  * @param  __ADDRESS__: NOR memory address 
+  * @retval NOR shifted address value
+  */
+#define NOR_ADDR_SHIFT(__NOR_ADDRESS, __NOR_MEMORY_WIDTH_, __ADDRESS__)       \
+            ((uint32_t)(((__NOR_MEMORY_WIDTH_) == NOR_MEMORY_8B)?              \
+              ((uint32_t)((__NOR_ADDRESS) + (2 * (__ADDRESS__)))):              \
+              ((uint32_t)((__NOR_ADDRESS) + (__ADDRESS__)))))
+ 
+/**
+  * @brief  NOR memory write data to specified address.
+  * @param  __ADDRESS__: NOR memory address 
+  * @param  __DATA__: Data to write
+  * @retval None
+  */
+#define NOR_WRITE(__ADDRESS__, __DATA__)   do{                                                             \
+                                                 (*(__IO uint16_t *)((uint32_t)(__ADDRESS__)) = (__DATA__)); \
+                                                 __DSB();                                                    \
+                                               } while(0)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_NOR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_pcd.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1243 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pcd.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   PCD HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the USB Peripheral Controller:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State functions
+  *         
+  @verbatim
+  ==============================================================================
+                    ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The PCD HAL driver can be used as follows:
+
+     (#) Declare a PCD_HandleTypeDef handle structure, for example:
+         PCD_HandleTypeDef  hpcd;
+        
+     (#) Fill parameters of Init structure in HCD handle
+  
+     (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...) 
+
+     (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API:
+         (##) Enable the PCD/USB Low Level interface clock using 
+              (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+              (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode)
+           
+         (##) Initialize the related GPIO clocks
+         (##) Configure PCD pin-out
+         (##) Configure PCD NVIC interrupt
+    
+     (#)Associate the Upper USB device stack to the HAL PCD Driver:
+         (##) hpcd.pData = pdev;
+
+     (#)Enable PCD transmission and reception:
+         (##) HAL_PCD_Start();
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PCD PCD
+  * @brief PCD HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+  * @{
+  */ 
+#define PCD_MIN(a, b)  (((a) < (b)) ? (a) : (b))
+#define PCD_MAX(a, b)  (((a) > (b)) ? (a) : (b))
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup PCD_Private_Functions PCD Private Functions
+  * @{
+  */
+static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Functions PCD Exported Functions
+  * @{
+  */
+
+/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+ ===============================================================================
+            ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the PCD according to the specified
+  *         parameters in the PCD_InitTypeDef and create the associated handle.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd)
+{ 
+  uint32_t i = 0;
+  
+  /* Check the PCD handle allocation */
+  if(hpcd == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance));
+
+  hpcd->State = HAL_PCD_STATE_BUSY;
+  
+  /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+  HAL_PCD_MspInit(hpcd);
+
+  /* Disable the Interrupts */
+ __HAL_PCD_DISABLE(hpcd);
+ 
+ /*Init the Core (common init.) */
+ USB_CoreInit(hpcd->Instance, hpcd->Init);
+ 
+ /* Force Device Mode*/
+ USB_SetCurrentMode(hpcd->Instance , USB_OTG_DEVICE_MODE);
+ 
+ /* Init endpoints structures */
+ for (i = 0; i < 15 ; i++)
+ {
+   /* Init ep structure */
+   hpcd->IN_ep[i].is_in = 1;
+   hpcd->IN_ep[i].num = i;
+   hpcd->IN_ep[i].tx_fifo_num = i;
+   /* Control until ep is activated */
+   hpcd->IN_ep[i].type = EP_TYPE_CTRL;
+   hpcd->IN_ep[i].maxpacket =  0;
+   hpcd->IN_ep[i].xfer_buff = 0;
+   hpcd->IN_ep[i].xfer_len = 0;
+ }
+ 
+ for (i = 0; i < 15 ; i++)
+ {
+   hpcd->OUT_ep[i].is_in = 0;
+   hpcd->OUT_ep[i].num = i;
+   hpcd->IN_ep[i].tx_fifo_num = i;
+   /* Control until ep is activated */
+   hpcd->OUT_ep[i].type = EP_TYPE_CTRL;
+   hpcd->OUT_ep[i].maxpacket = 0;
+   hpcd->OUT_ep[i].xfer_buff = 0;
+   hpcd->OUT_ep[i].xfer_len = 0;
+   
+   hpcd->Instance->DIEPTXF[i] = 0;
+ }
+ 
+ /* Init Device */
+ USB_DevInit(hpcd->Instance, hpcd->Init);
+ 
+ hpcd->State= HAL_PCD_STATE_READY;
+ 
+ /* Activate LPM */
+ if (hpcd->Init.lpm_enable == 1)
+ {
+   HAL_PCDEx_ActivateLPM(hpcd);
+ }
+ 
+ USB_DevDisconnect (hpcd->Instance);  
+ return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the PCD peripheral. 
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd)
+{
+  /* Check the PCD handle allocation */
+  if(hpcd == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  hpcd->State = HAL_PCD_STATE_BUSY;
+  
+  /* Stop Device */
+  HAL_PCD_Stop(hpcd);
+    
+  /* DeInit the low level hardware */
+  HAL_PCD_MspDeInit(hpcd);
+  
+  hpcd->State = HAL_PCD_STATE_RESET; 
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the PCD MSP.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes PCD MSP.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions
+ *  @brief   Data transfers functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to manage the PCD data 
+    transfers.
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Start The USB OTG Device.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd)
+{ 
+  __HAL_LOCK(hpcd); 
+  USB_DevConnect (hpcd->Instance);  
+  __HAL_PCD_ENABLE(hpcd);
+  __HAL_UNLOCK(hpcd); 
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop The USB OTG Device.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd)
+{ 
+  __HAL_LOCK(hpcd); 
+  __HAL_PCD_DISABLE(hpcd);
+  USB_StopDevice(hpcd->Instance);
+  USB_DevDisconnect (hpcd->Instance);
+  __HAL_UNLOCK(hpcd); 
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handle PCD interrupt request.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
+  uint32_t i = 0, ep_intr = 0, epint = 0, epnum = 0;
+  uint32_t fifoemptymsk = 0, temp = 0;
+  USB_OTG_EPTypeDef *ep;
+    
+  /* ensure that we are in device mode */
+  if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE)
+  {
+    /* avoid spurious interrupt */
+    if(__HAL_PCD_IS_INVALID_INTERRUPT(hpcd)) 
+    {
+      return;
+    }
+    
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS))
+    {
+     /* incorrect mode, acknowledge the interrupt */
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS);
+    }
+    
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT))
+    {
+      epnum = 0;
+      
+      /* Read in the device interrupt bits */
+      ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance);
+      
+      while ( ep_intr )
+      {
+        if (ep_intr & 0x1)
+        {
+          epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, epnum);
+          
+          if(( epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC)
+          {
+            CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC);
+            
+            if(hpcd->Init.dma_enable == 1)
+            {
+              hpcd->OUT_ep[epnum].xfer_count = hpcd->OUT_ep[epnum].maxpacket- (USBx_OUTEP(epnum)->DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ); 
+              hpcd->OUT_ep[epnum].xfer_buff += hpcd->OUT_ep[epnum].maxpacket;            
+            }
+            
+            HAL_PCD_DataOutStageCallback(hpcd, epnum);
+            if(hpcd->Init.dma_enable == 1)
+            {
+              if((epnum == 0) && (hpcd->OUT_ep[epnum].xfer_len == 0))
+              {
+                 /* this is ZLP, so prepare EP0 for next setup */
+                USB_EP0_OutStart(hpcd->Instance, 1, (uint8_t *)hpcd->Setup);
+              }              
+            }
+          }
+          
+          if(( epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP)
+          {
+            /* Inform the upper layer that a setup packet is available */
+            HAL_PCD_SetupStageCallback(hpcd);
+            CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP);
+          }
+          
+          if(( epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS)
+          {
+            CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS);
+          }
+          /* Clear Status Phase Received interrupt */
+          if(( epint & USB_OTG_DOEPINT_OTEPSPR) == USB_OTG_DOEPINT_OTEPSPR)
+          {
+            CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPSPR);
+          }
+        }
+        epnum++;
+        ep_intr >>= 1;
+      }
+    }
+    
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT))
+    {
+      /* Read in the device interrupt bits */
+      ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance);
+      
+      epnum = 0;
+      
+      while ( ep_intr )
+      {
+        if (ep_intr & 0x1) /* In ITR */
+        {
+          epint = USB_ReadDevInEPInterrupt(hpcd->Instance, epnum);
+
+           if(( epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC)
+          {
+            fifoemptymsk = 0x1 << epnum;
+            USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
+            
+            CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC);
+            
+            if (hpcd->Init.dma_enable == 1)
+            {
+              hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket; 
+            }
+                                      
+            HAL_PCD_DataInStageCallback(hpcd, epnum);
+
+            if (hpcd->Init.dma_enable == 1)
+            {
+              /* this is ZLP, so prepare EP0 for next setup */
+              if((epnum == 0) && (hpcd->IN_ep[epnum].xfer_len == 0))
+              {
+                /* prepare to rx more setup packets */
+                USB_EP0_OutStart(hpcd->Instance, 1, (uint8_t *)hpcd->Setup);
+              }
+            }           
+          }
+           if(( epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC)
+          {
+            CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC);
+          }
+          if(( epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE)
+          {
+            CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE);
+          }
+          if(( epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE)
+          {
+            CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE);
+          }
+          if(( epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD)
+          {
+            CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD);
+          }       
+          if(( epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE)
+          {
+            PCD_WriteEmptyTxFifo(hpcd , epnum);
+          }
+        }
+        epnum++;
+        ep_intr >>= 1;
+      }
+    }
+    
+    /* Handle Resume Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT))
+    {
+      /* Clear the Remote Wake-up Signaling */
+      USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
+      
+      if(hpcd->LPM_State == LPM_L1)
+      {
+        hpcd->LPM_State = LPM_L0;
+        HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE);
+      }
+      else
+      {
+        HAL_PCD_ResumeCallback(hpcd);
+      }
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT);
+    }
+    
+    /* Handle Suspend Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP))
+    {
+      if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+      {
+        
+        HAL_PCD_SuspendCallback(hpcd);
+      }
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP);
+    }
+    
+    /* Handle LPM Interrupt */ 
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT))
+    {
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT);      
+      if( hpcd->LPM_State == LPM_L0)
+      {
+        hpcd->LPM_State = LPM_L1;
+        hpcd->BESL = (hpcd->Instance->GLPMCFG & USB_OTG_GLPMCFG_BESL) >>2 ;
+        HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE);
+      }
+      else
+      {
+        HAL_PCD_SuspendCallback(hpcd);
+      }
+    }
+    
+    /* Handle Reset Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST))
+    {
+      USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; 
+      USB_FlushTxFifo(hpcd->Instance ,  0 );
+      
+      for (i = 0; i < hpcd->Init.dev_endpoints ; i++)
+      {
+        USBx_INEP(i)->DIEPINT = 0xFF;
+        USBx_OUTEP(i)->DOEPINT = 0xFF;
+      }
+      USBx_DEVICE->DAINT = 0xFFFFFFFF;
+      USBx_DEVICE->DAINTMSK |= 0x10001;
+      
+      if(hpcd->Init.use_dedicated_ep1)
+      {
+        USBx_DEVICE->DOUTEP1MSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM); 
+        USBx_DEVICE->DINEP1MSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);  
+      }
+      else
+      {
+        USBx_DEVICE->DOEPMSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM | USB_OTG_DOEPMSK_OTEPSPRM);
+        USBx_DEVICE->DIEPMSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
+      }
+      
+      /* Set Default Address to 0 */
+      USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD;
+      
+      /* setup EP0 to receive SETUP packets */
+      USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
+        
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST);
+    }
+    
+    /* Handle Enumeration done Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE))
+    {
+      USB_ActivateSetup(hpcd->Instance);
+      hpcd->Instance->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT;
+      
+      if ( USB_GetDevSpeed(hpcd->Instance) == USB_OTG_SPEED_HIGH)
+      {
+        hpcd->Init.speed            = USB_OTG_SPEED_HIGH;
+        hpcd->Init.ep0_mps          = USB_OTG_HS_MAX_PACKET_SIZE ;
+        hpcd->Instance->GUSBCFG |= (uint32_t)((USBD_HS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT);
+      }
+      else
+      {
+        hpcd->Init.speed            = USB_OTG_SPEED_FULL;
+        hpcd->Init.ep0_mps          = USB_OTG_FS_MAX_PACKET_SIZE ;  
+        hpcd->Instance->GUSBCFG |= (uint32_t)((USBD_FS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT);
+      }
+      
+      HAL_PCD_ResetCallback(hpcd);
+      
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE);
+    }
+    
+    /* Handle RxQLevel Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL))
+    {
+      USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+      temp = USBx->GRXSTSP;
+      ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM];
+      
+      if(((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) ==  STS_DATA_UPDT)
+      {
+        if((temp & USB_OTG_GRXSTSP_BCNT) != 0)
+        {
+          USB_ReadPacket(USBx, ep->xfer_buff, (temp & USB_OTG_GRXSTSP_BCNT) >> 4);
+          ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
+          ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
+        }
+      }
+      else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) ==  STS_SETUP_UPDT)
+      {
+        USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8);
+        ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
+      }
+      USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
+    }
+    
+    /* Handle SOF Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF))
+    {
+      HAL_PCD_SOFCallback(hpcd);
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF);
+    }
+    
+    /* Handle Incomplete ISO IN Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR))
+    {
+      HAL_PCD_ISOINIncompleteCallback(hpcd, epnum);
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR);
+    } 
+    
+    /* Handle Incomplete ISO OUT Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
+    {
+      HAL_PCD_ISOOUTIncompleteCallback(hpcd, epnum);
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
+    } 
+    
+    /* Handle Connection event Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT))
+    {
+      HAL_PCD_ConnectCallback(hpcd);
+      __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT);
+    } 
+    
+    /* Handle Disconnection event Interrupt */
+    if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT))
+    {
+      temp = hpcd->Instance->GOTGINT;
+      
+      if((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET)
+      {
+        HAL_PCD_DisconnectCallback(hpcd);
+      }
+      hpcd->Instance->GOTGINT |= temp;
+    }
+  }
+}
+
+/**
+  * @brief  Data OUT stage callback.
+  * @param  hpcd: PCD handle
+  * @param  epnum: endpoint number  
+  * @retval None
+  */
+ __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  UNUSED(epnum);  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_DataOutStageCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Data IN stage callback.
+  * @param  hpcd: PCD handle
+  * @param  epnum: endpoint number  
+  * @retval None
+  */
+ __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  UNUSED(epnum); 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_DataInStageCallback could be implemented in the user file
+   */ 
+}
+/**
+  * @brief  Setup stage callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_SetupStageCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  USB Start Of Frame callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_SOFCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  USB Reset callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_ResetCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Suspend event callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_SuspendCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Resume event callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_ResumeCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Incomplete ISO OUT callback.
+  * @param  hpcd: PCD handle
+  * @param  epnum: endpoint number
+  * @retval None
+  */
+ __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  UNUSED(epnum);  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Incomplete ISO IN  callback.
+  * @param  hpcd: PCD handle
+  * @param  epnum: endpoint number  
+  * @retval None
+  */
+ __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  UNUSED(epnum);  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Connection event callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_ConnectCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Disconnection event callback.
+  * @param  hpcd: PCD handle
+  * @retval None
+  */
+ __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCD_DisconnectCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ *  @brief   management functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the PCD data 
+    transfers.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Connect the USB device.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd)
+{
+  __HAL_LOCK(hpcd); 
+  USB_DevConnect(hpcd->Instance);
+  __HAL_UNLOCK(hpcd); 
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disconnect the USB device.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd)
+{
+  __HAL_LOCK(hpcd); 
+  USB_DevDisconnect(hpcd->Instance);
+  __HAL_UNLOCK(hpcd); 
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set the USB Device address. 
+  * @param  hpcd: PCD handle
+  * @param  address: new device address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address)
+{
+  __HAL_LOCK(hpcd); 
+  USB_SetDevAddress(hpcd->Instance, address);
+  __HAL_UNLOCK(hpcd);   
+  return HAL_OK;
+}
+/**
+  * @brief  Open and configure an endpoint.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @param  ep_mps: endpoint max packet size
+  * @param  ep_type: endpoint type   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type)
+{
+  HAL_StatusTypeDef  ret = HAL_OK;
+  USB_OTG_EPTypeDef *ep;
+  
+  if ((ep_addr & 0x80) == 0x80)
+  {
+    ep = &hpcd->IN_ep[ep_addr & 0x7F];
+  }
+  else
+  {
+    ep = &hpcd->OUT_ep[ep_addr & 0x7F];
+  }
+  ep->num   = ep_addr & 0x7F;
+  
+  ep->is_in = (0x80 & ep_addr) != 0;
+  ep->maxpacket = ep_mps;
+  ep->type = ep_type;
+  if (ep->is_in)
+  {
+    /* Assign a Tx FIFO */
+    ep->tx_fifo_num = ep->num;
+  }
+  /* Set initial data PID. */
+  if (ep_type == EP_TYPE_BULK )
+  {
+    ep->data_pid_start = 0;
+  }
+  
+  __HAL_LOCK(hpcd); 
+  USB_ActivateEndpoint(hpcd->Instance , ep);
+  __HAL_UNLOCK(hpcd);   
+  return ret;
+}
+
+
+/**
+  * @brief  Deactivate an endpoint.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{  
+  USB_OTG_EPTypeDef *ep;
+  
+  if ((ep_addr & 0x80) == 0x80)
+  {
+    ep = &hpcd->IN_ep[ep_addr & 0x7F];
+  }
+  else
+  {
+    ep = &hpcd->OUT_ep[ep_addr & 0x7F];
+  }
+  ep->num   = ep_addr & 0x7F;
+  
+  ep->is_in = (0x80 & ep_addr) != 0;
+  
+  __HAL_LOCK(hpcd); 
+  USB_DeactivateEndpoint(hpcd->Instance , ep);
+  __HAL_UNLOCK(hpcd);   
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Receive an amount of data.  
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @param  pBuf: pointer to the reception buffer   
+  * @param  len: amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+  USB_OTG_EPTypeDef *ep;
+  
+  ep = &hpcd->OUT_ep[ep_addr & 0x7F];
+  
+  /*setup and start the Xfer */
+  ep->xfer_buff = pBuf;  
+  ep->xfer_len = len;
+  ep->xfer_count = 0;
+  ep->is_in = 0;
+  ep->num = ep_addr & 0x7F;
+  
+  if (hpcd->Init.dma_enable == 1)
+  {
+    ep->dma_addr = (uint32_t)pBuf;  
+  }
+  
+  __HAL_LOCK(hpcd); 
+  
+  if ((ep_addr & 0x7F) == 0 )
+  {
+    USB_EP0StartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+  }
+  else
+  {
+    USB_EPStartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+  }
+  __HAL_UNLOCK(hpcd); 
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Get Received Data Size.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @retval Data Size
+  */
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+  return hpcd->OUT_ep[ep_addr & 0x7F].xfer_count;
+}
+/**
+  * @brief  Send an amount of data.  
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @param  pBuf: pointer to the transmission buffer   
+  * @param  len: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
+{
+  USB_OTG_EPTypeDef *ep;
+  
+  ep = &hpcd->IN_ep[ep_addr & 0x7F];
+  
+  /*setup and start the Xfer */
+  ep->xfer_buff = pBuf;  
+  ep->xfer_len = len;
+  ep->xfer_count = 0;
+  ep->is_in = 1;
+  ep->num = ep_addr & 0x7F;
+  
+  if (hpcd->Init.dma_enable == 1)
+  {
+    ep->dma_addr = (uint32_t)pBuf;  
+  }
+  
+  __HAL_LOCK(hpcd); 
+  
+  if ((ep_addr & 0x7F) == 0 )
+  {
+    USB_EP0StartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+  }
+  else
+  {
+    USB_EPStartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
+  }
+  
+  __HAL_UNLOCK(hpcd);
+     
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set a STALL condition over an endpoint.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+  USB_OTG_EPTypeDef *ep;
+  
+  if ((0x80 & ep_addr) == 0x80)
+  {
+    ep = &hpcd->IN_ep[ep_addr & 0x7F];
+  }
+  else
+  {
+    ep = &hpcd->OUT_ep[ep_addr];
+  }
+  
+  ep->is_stall = 1;
+  ep->num   = ep_addr & 0x7F;
+  ep->is_in = ((ep_addr & 0x80) == 0x80);
+  
+  
+  __HAL_LOCK(hpcd); 
+  USB_EPSetStall(hpcd->Instance , ep);
+  if((ep_addr & 0x7F) == 0)
+  {
+    USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
+  }
+  __HAL_UNLOCK(hpcd); 
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Clear a STALL condition over in an endpoint.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+  USB_OTG_EPTypeDef *ep;
+  
+  if ((0x80 & ep_addr) == 0x80)
+  {
+    ep = &hpcd->IN_ep[ep_addr & 0x7F];
+  }
+  else
+  {
+    ep = &hpcd->OUT_ep[ep_addr];
+  }
+  
+  ep->is_stall = 0;
+  ep->num   = ep_addr & 0x7F;
+  ep->is_in = ((ep_addr & 0x80) == 0x80);
+  
+  __HAL_LOCK(hpcd); 
+  USB_EPClearStall(hpcd->Instance , ep);
+  __HAL_UNLOCK(hpcd); 
+    
+  return HAL_OK;
+}
+
+/**
+  * @brief  Flush an endpoint.
+  * @param  hpcd: PCD handle
+  * @param  ep_addr: endpoint address
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
+{
+  __HAL_LOCK(hpcd); 
+  
+  if ((ep_addr & 0x80) == 0x80)
+  {
+    USB_FlushTxFifo(hpcd->Instance, ep_addr & 0x7F);
+  }
+  else
+  {
+    USB_FlushRxFifo(hpcd->Instance);
+  }
+  
+  __HAL_UNLOCK(hpcd); 
+    
+  return HAL_OK;
+}
+
+/**
+  * @brief  Activate remote wakeup signalling.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;  
+    
+  if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+  {
+    /* Activate Remote wakeup signaling */
+    USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG;
+  }
+  return HAL_OK;  
+}
+
+/**
+  * @brief  De-activate remote wakeup signalling.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;  
+  
+  /* De-activate Remote wakeup signaling */
+   USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG);
+  return HAL_OK;  
+}
+/**
+  * @}
+  */
+  
+/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions 
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral State functions #####
+ ===============================================================================  
+    [..]
+    This subsection permits to get in run-time the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the PCD handle state.
+  * @param  hpcd: PCD handle
+  * @retval HAL state
+  */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd)
+{
+  return hpcd->State;
+}
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup PCD_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Check FIFO for the next packet to be loaded.
+  * @param  hpcd: PCD handle
+  * @param  epnum : endpoint number   
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;  
+  USB_OTG_EPTypeDef *ep;
+  int32_t len = 0;
+  uint32_t len32b;
+  uint32_t fifoemptymsk = 0;
+
+  ep = &hpcd->IN_ep[epnum];
+  len = ep->xfer_len - ep->xfer_count;
+  
+  if (len > ep->maxpacket)
+  {
+    len = ep->maxpacket;
+  }
+  
+  
+  len32b = (len + 3) / 4;
+ 
+  while  ( (USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) > len32b &&
+          ep->xfer_count < ep->xfer_len &&
+            ep->xfer_len != 0)
+  {
+    /* Write the FIFO */
+    len = ep->xfer_len - ep->xfer_count;
+    
+    if (len > ep->maxpacket)
+    {
+      len = ep->maxpacket;
+    }
+    len32b = (len + 3) / 4;
+    
+    USB_WritePacket(USBx, ep->xfer_buff, epnum, len, hpcd->Init.dma_enable); 
+    
+    ep->xfer_buff  += len;
+    ep->xfer_count += len;
+  }
+  
+  if(len <= 0)
+  {
+    fifoemptymsk = 0x1 << epnum;
+    USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
+    
+  }
+  
+  return HAL_OK;  
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PCD_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_pcd.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,333 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pcd.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of PCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PCD_H
+#define __STM32F7xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_usb.h"
+   
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PCD
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup PCD_Exported_Types PCD Exported Types
+  * @{
+  */
+   
+/**
+  * @brief  PCD State structure definition
+  */ 
+typedef enum 
+{
+  HAL_PCD_STATE_RESET   = 0x00,
+  HAL_PCD_STATE_READY   = 0x01,
+  HAL_PCD_STATE_ERROR   = 0x02,
+  HAL_PCD_STATE_BUSY    = 0x03,
+  HAL_PCD_STATE_TIMEOUT = 0x04
+} PCD_StateTypeDef;
+
+/* Device LPM suspend state */
+typedef enum  
+{
+  LPM_L0 = 0x00, /* on */
+  LPM_L1 = 0x01, /* LPM L1 sleep */
+  LPM_L2 = 0x02, /* suspend */
+  LPM_L3 = 0x03, /* off */
+}PCD_LPM_StateTypeDef;
+
+typedef USB_OTG_GlobalTypeDef  PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef     PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef      PCD_EPTypeDef ;                          
+
+/** 
+  * @brief  PCD Handle Structure definition  
+  */ 
+typedef struct
+{
+  PCD_TypeDef             *Instance;   /*!< Register base address              */ 
+  PCD_InitTypeDef         Init;       /*!< PCD required parameters            */
+  PCD_EPTypeDef           IN_ep[15];  /*!< IN endpoint parameters             */
+  PCD_EPTypeDef           OUT_ep[15]; /*!< OUT endpoint parameters            */ 
+  HAL_LockTypeDef         Lock;       /*!< PCD peripheral status              */
+  __IO PCD_StateTypeDef   State;      /*!< PCD communication state            */
+  uint32_t                Setup[12];  /*!< Setup packet buffer                */
+  PCD_LPM_StateTypeDef    LPM_State;    /*!< LPM State                          */
+  uint32_t                BESL;
+  uint32_t                lpm_active;   /*!< Enable or disable the Link Power Management .                                  
+                                        This parameter can be set to ENABLE or DISABLE */
+  void                    *pData;       /*!< Pointer to upper stack Handler */  
+} PCD_HandleTypeDef;
+
+/**
+  * @}
+  */
+    
+/* Include PCD HAL Extension module */
+#include "stm32f7xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+  * @{
+  */
+
+/** @defgroup PCD_Speed PCD Speed
+  * @{
+  */
+#define PCD_SPEED_HIGH               0
+#define PCD_SPEED_HIGH_IN_FULL       1
+#define PCD_SPEED_FULL               2
+/**
+  * @}
+  */
+  
+/** @defgroup PCD_PHY_Module PCD PHY Module
+  * @{
+  */
+#define PCD_PHY_ULPI                 1
+#define PCD_PHY_EMBEDDED             2
+/**
+  * @}
+  */
+
+/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value
+  * @{
+  */
+#ifndef USBD_HS_TRDT_VALUE
+ #define USBD_HS_TRDT_VALUE           9
+#endif /* USBD_HS_TRDT_VALUE */
+#ifndef USBD_FS_TRDT_VALUE
+ #define USBD_FS_TRDT_VALUE           5
+#endif /* USBD_HS_TRDT_VALUE */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_ENABLE(__HANDLE__)                   USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__)                  USB_DisableGlobalInt ((__HANDLE__)->Instance)
+   
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__)             *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+                                                       ~(USB_OTG_PCGCCTL_STOPCLK)
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__)               *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+                                                      
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__)            ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10)
+                                                         
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE      ((uint32_t)0x08) 
+#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE     ((uint32_t)0x0C) 
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE        ((uint32_t)0x10) 
+
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE      ((uint32_t)0x08) 
+#define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE     ((uint32_t)0x0C) 
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE        ((uint32_t)0x10) 
+
+#define USB_OTG_HS_WAKEUP_EXTI_LINE              ((uint32_t)0x00100000)  /*!< External interrupt line 20 Connected to the USB HS EXTI Line */
+#define USB_OTG_FS_WAKEUP_EXTI_LINE              ((uint32_t)0x00040000)  /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                          EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE
+                                                      
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE()  EXTI->FTSR |= (USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                            EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE()   EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                                    EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE;)\
+                                                                    EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+                                                                    EXTI->FTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT()   (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE) 
+                                                                                                                    
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                          EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+
+                                                      
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE()  EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                            EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE()  EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                                   EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                                   EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+                                                                   EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE 
+                                                         
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT()  (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)                                                     
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* I/O operation functions  ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t          HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+/** @defgroup PCD_Instance_definition PCD Instance definition
+  * @{
+  */
+#define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
+                                       ((INSTANCE) == USB_OTG_HS))
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_pcd_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,203 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pcd_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   PCD HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the USB Peripheral Controller:
+  *           + Extended features functions
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PCDEx PCDEx
+  * @brief PCD Extended HAL module driver
+  * @{
+  */
+#ifdef HAL_PCD_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup PCDEx_Exported_Functions PCD Extended Exported Functions
+  * @{
+  */
+
+/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+  * @brief    PCDEx control functions 
+ *
+@verbatim   
+ ===============================================================================
+                 ##### Extended features functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Update FIFO configuration
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Set Tx FIFO
+  * @param  hpcd: PCD handle
+  * @param  fifo: The number of Tx fifo
+  * @param  size: Fifo size
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
+{
+  uint8_t i = 0;
+  uint32_t Tx_Offset = 0;
+
+  /*  TXn min size = 16 words. (n  : Transmit FIFO index)
+      When a TxFIFO is not used, the Configuration should be as follows: 
+          case 1 :  n > m    and Txn is not used    (n,m  : Transmit FIFO indexes)
+         --> Txm can use the space allocated for Txn.
+         case2  :  n < m    and Txn is not used    (n,m  : Transmit FIFO indexes)
+         --> Txn should be configured with the minimum space of 16 words
+     The FIFO is used optimally when used TxFIFOs are allocated in the top 
+         of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
+     When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
+  
+  Tx_Offset = hpcd->Instance->GRXFSIZ;
+  
+  if(fifo == 0)
+  {
+    hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((uint32_t)size << 16) | Tx_Offset);
+  }
+  else
+  {
+    Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16;
+    for (i = 0; i < (fifo - 1); i++)
+    {
+      Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16);
+    }
+    
+    /* Multiply Tx_Size by 2 to get higher performance */
+    hpcd->Instance->DIEPTXF[fifo - 1] = (uint32_t)(((uint32_t)size << 16) | Tx_Offset);
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Set Rx FIFO
+  * @param  hpcd: PCD handle
+  * @param  size: Size of Rx fifo
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
+{
+  hpcd->Instance->GRXFSIZ = size;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Activate LPM Feature
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;  
+  
+  hpcd->lpm_active = ENABLE;
+  hpcd->LPM_State = LPM_L0;
+  USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM;
+  USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  DeActivate LPM feature.
+  * @param  hpcd: PCD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;  
+  
+  hpcd->lpm_active = DISABLE;
+  USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM;
+  USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Send LPM message to user layer callback.
+  * @param  hpcd: PCD handle
+  * @param  msg: LPM message
+  * @retval HAL status
+  */
+__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hpcd);
+  UNUSED(msg);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PCDEx_LPM_Callback could be implemented in the user file
+   */	
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PCD_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_pcd_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,101 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pcd_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of PCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PCD_EX_H
+#define __STM32F7xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+   
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PCDEx
+  * @{
+  */
+/* Exported types ------------------------------------------------------------*/
+typedef enum  
+{
+  PCD_LPM_L0_ACTIVE = 0x00, /* on */
+  PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */
+}PCD_LPM_MsgTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCDEx_Exported_Functions PCD Extended Exported Functions
+  * @{
+  */
+/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_pwr.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,609 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pwr.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   PWR HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Power Controller (PWR) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions 
+  *         
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PWR PWR
+  * @brief PWR HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWR_Private_Constants
+  * @{
+  */
+	
+/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
+  * @{
+  */     
+#define PVD_MODE_IT               ((uint32_t)0x00010000)
+#define PVD_MODE_EVT              ((uint32_t)0x00020000)
+#define PVD_RISING_EDGE           ((uint32_t)0x00000001)
+#define PVD_FALLING_EDGE          ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_ENABLE_WUP_Mask PWR Enable WUP Mask
+  * @{
+  */  
+#define  PWR_EWUP_MASK                          ((uint32_t)0x00003F00)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+
+/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  *  @brief    Initialization and de-initialization functions
+  *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]
+      After reset, the backup domain (RTC registers, RTC backup data 
+      registers and backup SRAM) is protected against possible unwanted 
+      write accesses. 
+      To enable access to the RTC Domain and RTC registers, proceed as follows:
+        (+) Enable the Power Controller (PWR) APB1 interface clock using the
+            __HAL_RCC_PWR_CLK_ENABLE() macro.
+        (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Deinitializes the HAL PWR peripheral registers to their default reset values.
+  * @retval None
+  */
+void HAL_PWR_DeInit(void)
+{
+  __HAL_RCC_PWR_FORCE_RESET();
+  __HAL_RCC_PWR_RELEASE_RESET();
+}
+
+/**
+  * @brief Enables access to the backup domain (RTC registers, RTC 
+  *         backup data registers and backup SRAM).
+  * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the 
+  *         Backup Domain Access should be kept enabled.
+  * @retval None
+  */
+void HAL_PWR_EnableBkUpAccess(void)
+{
+  /* Enable access to RTC and backup registers */
+  SET_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+  * @brief Disables access to the backup domain (RTC registers, RTC 
+  *         backup data registers and backup SRAM).
+  * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the 
+  *         Backup Domain Access should be kept enabled.
+  * @retval None
+  */
+void HAL_PWR_DisableBkUpAccess(void)
+{
+  /* Disable access to RTC and backup registers */
+	CLEAR_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions 
+  *  @brief Low Power modes configuration functions 
+  *
+@verbatim
+
+ ===============================================================================
+                 ##### Peripheral Control functions #####
+ ===============================================================================
+     
+    *** PVD configuration ***
+    =========================
+    [..]
+      (+) The PVD is used to monitor the VDD power supply by comparing it to a 
+          threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
+      (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower 
+          than the PVD threshold. This event is internally connected to the EXTI 
+          line16 and can generate an interrupt if enabled. This is done through
+          __HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
+      (+) The PVD is stopped in Standby mode.
+
+    *** Wake-up pin configuration ***
+    ================================
+    [..]
+      (+) Wake-up pin is used to wake up the system from Standby mode. This pin is 
+          forced in input pull-down configuration and is active on rising edges.
+      (+) There are to 6 Wake-up pin in the STM32F7 devices family
+
+    *** Low Power modes configuration ***
+    =====================================
+    [..]
+      The devices feature 3 low-power modes:
+      (+) Sleep mode: Cortex-M7 core stopped, peripherals kept running.
+      (+) Stop mode: all clocks are stopped, regulator running, regulator 
+          in low power mode
+      (+) Standby mode: 1.2V domain powered off.
+   
+   *** Sleep mode ***
+   ==================
+    [..]
+      (+) Entry:
+        The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI)
+              functions with
+          (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+          (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+      
+      -@@- The Regulator parameter is not used for the STM32F7 family 
+              and is kept as parameter just to maintain compatibility with the 
+              lower power families (STM32L).
+      (+) Exit:
+        Any peripheral interrupt acknowledged by the nested vectored interrupt 
+              controller (NVIC) can wake up the device from Sleep mode.
+
+   *** Stop mode ***
+   =================
+    [..]
+      In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI,
+      and the HSE RC oscillators are disabled. Internal SRAM and register contents 
+      are preserved.
+      The voltage regulator can be configured either in normal or low-power mode.
+      To minimize the consumption In Stop mode, FLASH can be powered off before 
+      entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function.
+      It can be switched on again by software after exiting the Stop mode using
+      the HAL_PWREx_DisableFlashPowerDown() function. 
+
+      (+) Entry:
+         The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON) 
+             function with:
+          (++) Main regulator ON.
+          (++) Low Power regulator ON.
+      (+) Exit:
+        Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
+
+   *** Standby mode ***
+   ====================
+    [..]
+    (+)
+      The Standby mode allows to achieve the lowest power consumption. It is based 
+      on the Cortex-M7 deep sleep mode, with the voltage regulator disabled. 
+      The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and 
+      the HSE oscillator are also switched off. SRAM and register contents are lost 
+      except for the RTC registers, RTC backup registers, backup SRAM and Standby 
+      circuitry.
+   
+      The voltage regulator is OFF.
+      
+      (++) Entry:
+        (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
+      (++) Exit:
+        (+++) WKUP pin rising or falling edge, RTC alarm (Alarm A and Alarm B), RTC
+             wakeup, tamper event, time stamp event, external reset in NRST pin, IWDG reset.
+
+   *** Auto-wakeup (AWU) from low-power mode ***
+   =============================================
+    [..]
+    
+     (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC 
+      Wakeup event, a tamper event or a time-stamp event, without depending on 
+      an external interrupt (Auto-wakeup mode).
+
+      (+) RTC auto-wakeup (AWU) from the Stop and Standby modes
+       
+        (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to 
+              configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
+
+        (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it 
+             is necessary to configure the RTC to detect the tamper or time stamp event using the
+                HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions.
+                  
+        (++) To wake up from the Stop mode with an RTC WakeUp event, it is necessary to
+              configure the RTC to generate the RTC WakeUp event using the HAL_RTCEx_SetWakeUpTimer_IT() function.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+  * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration
+  *        information for the PVD.
+  * @note Refer to the electrical characteristics of your device datasheet for
+  *         more details about the voltage threshold corresponding to each 
+  *         detection level.
+  * @retval None
+  */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
+  assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
+  
+  /* Set PLS[7:5] bits according to PVDLevel value */
+  MODIFY_REG(PWR->CR1, PWR_CR1_PLS, sConfigPVD->PVDLevel);
+  
+  /* Clear any previous config. Keep it clear if no event or IT mode is selected */
+  __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
+  __HAL_PWR_PVD_EXTI_DISABLE_IT();
+  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
+  __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); 
+
+  /* Configure interrupt mode */
+  if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_IT();
+  }
+  
+  /* Configure event mode */
+  if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
+  }
+  
+  /* Configure the edge */
+  if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
+  }
+  
+  if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
+  {
+    __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+  }
+}
+
+/**
+  * @brief Enables the Power Voltage Detector(PVD).
+  * @retval None
+  */
+void HAL_PWR_EnablePVD(void)
+{
+  /* Enable the power voltage detector */
+	SET_BIT(PWR->CR1, PWR_CR1_PVDE);
+}
+
+/**
+  * @brief Disables the Power Voltage Detector(PVD).
+  * @retval None
+  */
+void HAL_PWR_DisablePVD(void)
+{
+  /* Disable the power voltage detector */
+	CLEAR_BIT(PWR->CR1, PWR_CR1_PVDE);
+}
+
+/**
+  * @brief Enable the WakeUp PINx functionality.
+  * @param WakeUpPinPolarity: Specifies which Wake-Up pin to enable.
+  *         This parameter can be one of the following legacy values, which sets the default polarity: 
+  *         detection on high level (rising edge):
+  *           @arg PWR_WAKEUP_PIN1, PWR_WAKEUP_PIN2, PWR_WAKEUP_PIN3, PWR_WAKEUP_PIN4, PWR_WAKEUP_PIN5, PWR_WAKEUP_PIN6 
+  *         or one of the following value where the user can explicitly states the enabled pin and
+  *         the chosen polarity  
+  *           @arg PWR_WAKEUP_PIN1_HIGH or PWR_WAKEUP_PIN1_LOW 
+  *           @arg PWR_WAKEUP_PIN2_HIGH or PWR_WAKEUP_PIN2_LOW 
+  *           @arg PWR_WAKEUP_PIN3_HIGH or PWR_WAKEUP_PIN3_LOW 
+  *           @arg PWR_WAKEUP_PIN4_HIGH or PWR_WAKEUP_PIN4_LOW
+  *           @arg PWR_WAKEUP_PIN5_HIGH or PWR_WAKEUP_PIN5_LOW 
+  *           @arg PWR_WAKEUP_PIN6_HIGH or PWR_WAKEUP_PIN6_LOW 
+  * @note  PWR_WAKEUP_PINx and PWR_WAKEUP_PINx_HIGH are equivalent.               
+  * @retval None
+  */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity)
+{
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinPolarity));
+  
+  /* Enable wake-up pin */
+  SET_BIT(PWR->CSR2, (PWR_EWUP_MASK & WakeUpPinPolarity));
+	
+  /* Specifies the Wake-Up pin polarity for the event detection
+    (rising or falling edge) */
+  MODIFY_REG(PWR->CR2, (PWR_EWUP_MASK & WakeUpPinPolarity), (WakeUpPinPolarity >> 0x06));
+}
+
+/**
+  * @brief Disables the WakeUp PINx functionality.
+  * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
+  *         This parameter can be one of the following values:
+  *           @arg PWR_WAKEUP_PIN1
+  *           @arg PWR_WAKEUP_PIN2
+  *           @arg PWR_WAKEUP_PIN3
+  *           @arg PWR_WAKEUP_PIN4
+  *           @arg PWR_WAKEUP_PIN5
+  *           @arg PWR_WAKEUP_PIN6 
+  * @retval None
+  */
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
+{
+  assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
+
+  CLEAR_BIT(PWR->CSR2, WakeUpPinx);
+}
+  
+/**
+  * @brief Enters Sleep mode.
+  *   
+  * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
+  * 
+  * @note In Sleep mode, the systick is stopped to avoid exit from this mode with
+  *       systick interrupt when used as time base for Timeout 
+  *                
+  * @param Regulator: Specifies the regulator state in SLEEP mode.
+  *            This parameter can be one of the following values:
+  *            @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
+  *            @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
+  * @note This parameter is not used for the STM32F7 family and is kept as parameter
+  *       just to maintain compatibility with the lower power families.
+  * @param SLEEPEntry: Specifies if SLEEP mode in entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
+  *            @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
+  * @retval None
+  */
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(Regulator));
+  assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
+
+  /* Clear SLEEPDEEP bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
+
+  /* Select SLEEP mode entry -------------------------------------------------*/
+  if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
+  {   
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __SEV();
+    __WFE();
+    __WFE();
+  }
+}
+
+/**
+  * @brief Enters Stop mode. 
+  * @note In Stop mode, all I/O pins keep the same state as in Run mode.
+  * @note When exiting Stop mode by issuing an interrupt or a wakeup event, 
+  *         the HSI RC oscillator is selected as system clock.
+  * @note When the voltage regulator operates in low power mode, an additional 
+  *         startup delay is incurred when waking up from Stop mode. 
+  *         By keeping the internal regulator ON during Stop mode, the consumption 
+  *         is higher although the startup time is reduced.    
+  * @param Regulator: Specifies the regulator state in Stop mode.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
+  *            @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
+  * @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
+  *            @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
+  * @retval None
+  */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(Regulator));
+  assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+  
+  /* Select the regulator state in Stop mode ---------------------------------*/
+  tmpreg = PWR->CR1;
+  /* Clear PDDS and LPDS bits */
+  tmpreg &= (uint32_t)~(PWR_CR1_PDDS | PWR_CR1_LPDS);
+  
+  /* Set LPDS, MRLVDS and LPLVDS bits according to Regulator value */
+  tmpreg |= Regulator;
+  
+  /* Store the new value */
+  PWR->CR1 = tmpreg;
+  
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+  
+  /* Select Stop mode entry --------------------------------------------------*/
+  if(STOPEntry == PWR_STOPENTRY_WFI)
+  {   
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __SEV();
+    __WFE();
+    __WFE();
+  }
+  /* Reset SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);  
+}
+
+/**
+  * @brief Enters Standby mode.
+  * @note In Standby mode, all I/O pins are high impedance except for:
+  *          - Reset pad (still available) 
+  *          - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC 
+  *            Alarm out, or RTC clock calibration out.
+  *          - RTC_AF2 pin (PI8) if configured for tamper or time-stamp.  
+  *          - WKUP pins if enabled.       
+  * @retval None
+  */
+void HAL_PWR_EnterSTANDBYMode(void)
+{
+  /* Select Standby mode */
+  PWR->CR1 |= PWR_CR1_PDDS;
+  
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+  
+  /* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM)
+  __force_stores();
+#endif
+  /* Request Wait For Interrupt */
+  __WFI();
+}
+
+/**
+  * @brief This function handles the PWR PVD interrupt request.
+  * @note This API should be called under the PVD_IRQHandler().
+  * @retval None
+  */
+void HAL_PWR_PVD_IRQHandler(void)
+{
+  /* Check PWR Exti flag */
+  if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
+  {
+    /* PWR PVD interrupt user callback */
+    HAL_PWR_PVDCallback();
+    
+    /* Clear PWR Exti pending bit */
+    __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
+  }
+}
+
+/**
+  * @brief  PWR PVD interrupt callback
+  * @retval None
+  */
+__weak void HAL_PWR_PVDCallback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_PWR_PVDCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode. 
+  * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor 
+  *       re-enters SLEEP mode when an interruption handling is over.
+  *       Setting this bit is useful when the processor is expected to run only on
+  *       interruptions handling.         
+  * @retval None
+  */
+void HAL_PWR_EnableSleepOnExit(void)
+{
+  /* Set SLEEPONEXIT bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+  * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode. 
+  * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor 
+  *       re-enters SLEEP mode when an interruption handling is over.          
+  * @retval None
+  */
+void HAL_PWR_DisableSleepOnExit(void)
+{
+  /* Clear SLEEPONEXIT bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
+}
+
+/**
+  * @brief Enables CORTEX M4 SEVONPEND bit. 
+  * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes 
+  *       WFE to wake up when an interrupt moves from inactive to pended.
+  * @retval None
+  */
+void HAL_PWR_EnableSEVOnPend(void)
+{
+  /* Set SEVONPEND bit of Cortex System Control Register */
+  SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @brief Disables CORTEX M4 SEVONPEND bit. 
+  * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes 
+  *       WFE to wake up when an interrupt moves from inactive to pended.         
+  * @retval None
+  */
+void HAL_PWR_DisableSEVOnPend(void)
+{
+  /* Clear SEVONPEND bit of Cortex System Control Register */
+  CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
+}
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_pwr.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,424 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pwr.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of PWR HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PWR_H
+#define __STM32F7xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWR
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+  * @{
+  */
+   
+/**
+  * @brief  PWR PVD configuration structure definition
+  */
+typedef struct
+{
+  uint32_t PVDLevel;   /*!< PVDLevel: Specifies the PVD detection level.
+                            This parameter can be a value of @ref PWR_PVD_detection_level */
+
+  uint32_t Mode;      /*!< Mode: Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+  * @{
+  */
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
+  * @{
+  */ 
+#define PWR_PVDLEVEL_0                  PWR_CR1_PLS_LEV0
+#define PWR_PVDLEVEL_1                  PWR_CR1_PLS_LEV1
+#define PWR_PVDLEVEL_2                  PWR_CR1_PLS_LEV2
+#define PWR_PVDLEVEL_3                  PWR_CR1_PLS_LEV3
+#define PWR_PVDLEVEL_4                  PWR_CR1_PLS_LEV4
+#define PWR_PVDLEVEL_5                  PWR_CR1_PLS_LEV5
+#define PWR_PVDLEVEL_6                  PWR_CR1_PLS_LEV6
+#define PWR_PVDLEVEL_7                  PWR_CR1_PLS_LEV7/* External input analog voltage 
+                                                          (Compare internally to VREFINT) */
+
+/**
+  * @}
+  */   
+ 
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
+  * @{
+  */
+#define PWR_PVD_MODE_NORMAL                 ((uint32_t)0x00000000)   /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING              ((uint32_t)0x00010001)   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING             ((uint32_t)0x00010002)   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING      ((uint32_t)0x00010003)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING           ((uint32_t)0x00020001)   /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING          ((uint32_t)0x00020002)   /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING   ((uint32_t)0x00020003)   /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_ON                        ((uint32_t)0x00000000)
+#define PWR_LOWPOWERREGULATOR_ON                    PWR_CR1_LPDS
+/**
+  * @}
+  */
+    
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+  * @{
+  */
+#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+  * @{
+  */
+#define PWR_STOPENTRY_WFI               ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE               ((uint8_t)0x02)
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
+  * @{
+  */
+#define PWR_REGULATOR_VOLTAGE_SCALE1         PWR_CR1_VOS
+#define PWR_REGULATOR_VOLTAGE_SCALE2         PWR_CR1_VOS_1
+#define PWR_REGULATOR_VOLTAGE_SCALE3         PWR_CR1_VOS_0
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Flag PWR Flag
+  * @{
+  */
+#define PWR_FLAG_WU                     PWR_CSR1_WUIF
+#define PWR_FLAG_SB                     PWR_CSR1_SBF
+#define PWR_FLAG_PVDO                   PWR_CSR1_PVDO
+#define PWR_FLAG_BRR                    PWR_CSR1_BRR
+#define PWR_FLAG_VOSRDY                 PWR_CSR1_VOSRDY
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+  * @{
+  */
+
+/** @brief  macros configure the main internal regulator output voltage.
+  * @param  __REGULATOR__: specifies the regulator output voltage to achieve
+  *         a tradeoff between performance and power consumption when the device does
+  *         not operate at the maximum frequency (refer to the datasheets for more details).
+  *          This parameter can be one of the following values:
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+  * @retval None
+  */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do {                                                     \
+                                                          __IO uint32_t tmpreg = 0x00;                               \
+                                                            MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \
+                                                            /* Delay after an RCC peripheral clock enabling */  \
+                                                            tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS);           \
+                                                            UNUSED(tmpreg);                                     \
+				                                                	} while(0)
+
+/** @brief  Check PWR flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *           This parameter can be one of the following values:
+  *            @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event 
+  *                  was received on the internal wakeup line in standby mode (RTC alarm (Alarm A or Alarm B),
+  *                  RTC Tamper event, RTC TimeStamp event or RTC Wakeup)).
+  *            @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+  *                  resumed from StandBy mode.    
+  *            @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled 
+  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode 
+  *                  For this reason, this bit is equal to 0 after Standby or reset
+  *                  until the PVDE bit is set.
+  *            @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset 
+  *                  when the device wakes up from Standby mode or by a system reset 
+  *                  or power reset.  
+  *            @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage 
+  *                 scaling output selection is ready.
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clear the PWR's pending flags.
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_FLAG_SB: StandBy flag
+  */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR1 |=  (__FLAG__) << 2)
+
+/**
+  * @brief Enable the PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT()   (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable the PVD EXTI Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT()  (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Enable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT()   (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Disable event on PVD Exti Line 16.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT()  (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Enable the PVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE()   SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE()  CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Enable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE()   SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief Disable the PVD Extended Interrupt Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()  CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief  PVD EXTI line configuration: set rising & falling edge trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE()   __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE()  __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+  * @brief checks whether the specified PVD Exti interrupt flag is set or not.
+  * @retval EXTI PVD Line Status.
+  */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG()  (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief Clear the PVD Exti flag.
+  * @retval None.
+  */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG()  (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+  * @brief  Generates a Software interrupt on PVD EXTI line.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+  * @}
+  */
+
+/* Include PWR HAL Extension module */
+#include "stm32f7xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+  
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @{
+  */
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+/**
+  * @}
+  */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions 
+  * @{
+  */
+/* Peripheral Control functions  **********************************************/
+/* PVD configuration */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+/* Power PVD IRQ Handler */
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+
+/* Cortex System Control functions  *******************************************/
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWR_Private_Constants PWR Private Constants
+  * @{
+  */
+
+/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
+  * @{
+  */
+#define PWR_EXTI_LINE_PVD  ((uint32_t)EXTI_IMR_MR16)  /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWR_Private_Macros PWR Private Macros
+  * @{
+  */
+
+/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
+  * @{
+  */
+#define IS_PWR_WAKEUP_POLARITY(POLARITY)       (((POLARITY) == PWR_POLARITY_RISINGEDGE)  || \
+                                                    ((POLARITY) == PWR_POLARITY_FALLINGEDGE))
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+                              ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+                              ((MODE) == PWR_PVD_MODE_NORMAL))
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+                                     ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+                                           ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+                                           ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_pwr_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,564 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pwr_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Extended PWR HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of PWR extension peripheral:           
+  *           + Peripheral Extended features functions
+  *         
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup PWREx PWREx
+  * @brief PWR HAL module driver
+  * @{
+  */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup PWREx_Private_Constants
+  * @{
+  */    
+#define PWR_OVERDRIVE_TIMEOUT_VALUE  1000
+#define PWR_UDERDRIVE_TIMEOUT_VALUE  1000
+#define PWR_BKPREG_TIMEOUT_VALUE     1000
+#define PWR_VOSRDY_TIMEOUT_VALUE     1000
+/**
+  * @}
+  */
+    
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+  *  @{
+  */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions 
+  *  @brief Peripheral Extended features functions 
+  *
+@verbatim   
+
+ ===============================================================================
+                 ##### Peripheral extended features functions #####
+ ===============================================================================
+
+    *** Main and Backup Regulators configuration ***
+    ================================================
+    [..] 
+      (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from 
+          the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is 
+          retained even in Standby or VBAT mode when the low power backup regulator
+          is enabled. It can be considered as an internal EEPROM when VBAT is 
+          always present. You can use the HAL_PWREx_EnableBkUpReg() function to 
+          enable the low power backup regulator. 
+
+      (+) When the backup domain is supplied by VDD (analog switch connected to VDD) 
+          the backup SRAM is powered from VDD which replaces the VBAT power supply to 
+          save battery life.
+
+      (+) The backup SRAM is not mass erased by a tamper event. It is read 
+          protected to prevent confidential data, such as cryptographic private 
+          key, from being accessed. The backup SRAM can be erased only through 
+          the Flash interface when a protection level change from level 1 to 
+          level 0 is requested. 
+      -@- Refer to the description of Read protection (RDP) in the Flash 
+          programming manual.
+
+      (+) The main internal regulator can be configured to have a tradeoff between 
+          performance and power consumption when the device does not operate at 
+          the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG() 
+          macro which configure VOS bit in PWR_CR register
+          
+        Refer to the product datasheets for more details.
+
+    *** FLASH Power Down configuration ****
+    =======================================
+    [..] 
+      (+) By setting the FPDS bit in the PWR_CR register by using the 
+          HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power 
+          down mode when the device enters Stop mode. When the Flash memory 
+          is in power down mode, an additional startup delay is incurred when 
+          waking up from Stop mode.
+
+    *** Over-Drive and Under-Drive configuration ****
+    =================================================
+    [..]         
+       (+) In Run mode: the main regulator has 2 operating modes available:
+        (++) Normal mode: The CPU and core logic operate at maximum frequency at a given 
+             voltage scaling (scale 1, scale 2 or scale 3)
+        (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a 
+            higher frequency than the normal mode for a given voltage scaling (scale 1,  
+            scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and
+            disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow 
+            the sequence described in Reference manual.
+             
+       (+) In Stop mode: the main regulator or low power regulator supplies a low power 
+           voltage to the 1.2V domain, thus preserving the content of registers 
+           and internal SRAM. 2 operating modes are available:
+         (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only 
+              available when the main regulator or the low power regulator is used in Scale 3 or 
+              low voltage mode.
+         (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only
+              available when the main regulator or the low power regulator is in low voltage mode.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Enables the Backup Regulator.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void)
+{
+  uint32_t tickstart = 0;
+
+  /* Enable Backup regulator */
+  PWR->CSR1 |= PWR_CSR1_BRE;
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till Backup regulator ready flag is set */  
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    } 
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief Disables the Backup Regulator.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void)
+{
+  uint32_t tickstart = 0;
+  
+  /* Disable Backup regulator */
+  PWR->CSR1 &= (uint32_t)~((uint32_t)PWR_CSR1_BRE);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till Backup regulator ready flag is set */  
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    } 
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief Enables the Flash Power Down in Stop mode.
+  * @retval None
+  */
+void HAL_PWREx_EnableFlashPowerDown(void)
+{
+  /* Enable the Flash Power Down */
+  PWR->CR1 |= PWR_CR1_FPDS;
+}
+
+/**
+  * @brief Disables the Flash Power Down in Stop mode.
+  * @retval None
+  */
+void HAL_PWREx_DisableFlashPowerDown(void)
+{
+  /* Disable the Flash Power Down */
+  PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_FPDS);
+}
+
+/**
+  * @brief Enables Main Regulator low voltage mode.
+  * @retval None
+  */
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void)
+{
+  /* Enable Main regulator low voltage */
+  PWR->CR1 |= PWR_CR1_MRUDS;
+}
+
+/**
+  * @brief Disables Main Regulator low voltage mode.
+  * @retval None
+  */
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void)
+{  
+  /* Disable Main regulator low voltage */
+  PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_MRUDS);
+}
+
+/**
+  * @brief Enables Low Power Regulator low voltage mode.
+  * @retval None
+  */
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void)
+{
+  /* Enable low power regulator */
+  PWR->CR1 |= PWR_CR1_LPUDS;
+}
+
+/**
+  * @brief Disables Low Power Regulator low voltage mode.
+  * @retval None
+  */
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void)
+{
+  /* Disable low power regulator */
+  PWR->CR1 &= (uint32_t)~((uint32_t)PWR_CR1_LPUDS);
+}
+
+/**
+  * @brief  Activates the Over-Drive mode.
+  * @note   This mode allows the CPU and the core logic to operate at a higher frequency
+  *         than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).   
+  * @note   It is recommended to enter or exit Over-drive mode when the application is not running 
+  *         critical tasks and when the system clock source is either HSI or HSE. 
+  *         During the Over-drive switch activation, no peripheral clocks should be enabled.   
+  *         The peripheral clocks must be enabled once the Over-drive mode is activated.   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void)
+{
+  uint32_t tickstart = 0;
+
+  __HAL_RCC_PWR_CLK_ENABLE();
+  
+  /* Enable the Over-drive to extend the clock frequency to 216 MHz */
+  __HAL_PWR_OVERDRIVE_ENABLE();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  /* Enable the Over-drive switch */
+  __HAL_PWR_OVERDRIVESWITCHING_ENABLE();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  } 
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates the Over-Drive mode.
+  * @note   This mode allows the CPU and the core logic to operate at a higher frequency
+  *         than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).    
+  * @note   It is recommended to enter or exit Over-drive mode when the application is not running 
+  *         critical tasks and when the system clock source is either HSI or HSE. 
+  *         During the Over-drive switch activation, no peripheral clocks should be enabled.   
+  *         The peripheral clocks must be enabled once the Over-drive mode is activated.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void)
+{
+  uint32_t tickstart = 0;
+  
+  __HAL_RCC_PWR_CLK_ENABLE();
+    
+  /* Disable the Over-drive switch */
+  __HAL_PWR_OVERDRIVESWITCHING_DISABLE();
+  
+  /* Get tick */
+  tickstart = HAL_GetTick();
+ 
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  } 
+  
+  /* Disable the Over-drive */
+  __HAL_PWR_OVERDRIVE_DISABLE();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enters in Under-Drive STOP mode.
+  * 
+  * @note    This mode can be selected only when the Under-Drive is already active 
+  *   
+  * @note    This mode is enabled only with STOP low power mode.
+  *          In this mode, the 1.2V domain is preserved in reduced leakage mode. This 
+  *          mode is only available when the main regulator or the low power regulator 
+  *          is in low voltage mode
+  *        
+  * @note   If the Under-drive mode was enabled, it is automatically disabled after 
+  *         exiting Stop mode. 
+  *         When the voltage regulator operates in Under-drive mode, an additional  
+  *         startup delay is induced when waking up from Stop mode.
+  *                    
+  * @note   In Stop mode, all I/O pins keep the same state as in Run mode.
+  *   
+  * @note   When exiting Stop mode by issuing an interrupt or a wakeup event, 
+  *         the HSI RC oscillator is selected as system clock.
+  *           
+  * @note   When the voltage regulator operates in low power mode, an additional 
+  *         startup delay is incurred when waking up from Stop mode. 
+  *         By keeping the internal regulator ON during Stop mode, the consumption 
+  *         is higher although the startup time is reduced.
+  *     
+  * @param  Regulator: specifies the regulator state in STOP mode.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_MAINREGULATOR_UNDERDRIVE_ON:  Main Regulator in under-drive mode 
+  *                 and Flash memory in power-down when the device is in Stop under-drive mode
+  *            @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON:  Low Power Regulator in under-drive mode 
+  *                and Flash memory in power-down when the device is in Stop under-drive mode
+  * @param  STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
+  *            @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
+{
+  uint32_t tempreg = 0;
+  uint32_t tickstart = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator));
+  assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
+  
+  /* Enable Power ctrl clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+  /* Enable the Under-drive Mode ---------------------------------------------*/
+  /* Clear Under-drive flag */
+  __HAL_PWR_CLEAR_ODRUDR_FLAG();
+  
+  /* Enable the Under-drive */ 
+  __HAL_PWR_UNDERDRIVE_ENABLE();
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait for UnderDrive mode is ready */
+  while(__HAL_PWR_GET_FLAG(PWR_FLAG_UDRDY))
+  {
+    if((HAL_GetTick() - tickstart ) > PWR_UDERDRIVE_TIMEOUT_VALUE)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  /* Select the regulator state in STOP mode ---------------------------------*/
+  tempreg = PWR->CR1;
+  /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */
+  tempreg &= (uint32_t)~(PWR_CR1_PDDS | PWR_CR1_LPDS | PWR_CR1_LPUDS | PWR_CR1_MRUDS);
+  
+  /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */
+  tempreg |= Regulator;
+  
+  /* Store the new value */
+  PWR->CR1 = tempreg;
+  
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
+  
+  /* Select STOP mode entry --------------------------------------------------*/
+  if(STOPEntry == PWR_SLEEPENTRY_WFI)
+  {   
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __WFE();
+  }
+  /* Reset SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
+
+  return HAL_OK;  
+}
+
+/**
+  * @brief Returns Voltage Scaling Range.
+  * @retval VOS bit field (PWR_REGULATOR_VOLTAGE_SCALE1, PWR_REGULATOR_VOLTAGE_SCALE2 or 
+  *            PWR_REGULATOR_VOLTAGE_SCALE3)PWR_REGULATOR_VOLTAGE_SCALE1
+  */  
+uint32_t HAL_PWREx_GetVoltageRange(void)
+{
+  return  (PWR->CR1 & PWR_CR1_VOS);
+}
+
+/**
+  * @brief Configures the main internal regulator output voltage.
+  * @param  VoltageScaling: specifies the regulator output voltage to achieve
+  *         a tradeoff between performance and power consumption.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
+  *                                                typical output voltage at 1.4 V,  
+  *                                                system frequency up to 216 MHz.
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
+  *                                                typical output voltage at 1.2 V,                
+  *                                                system frequency up to 180 MHz.
+  *            @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 2 mode,
+  *                                                typical output voltage at 1.00 V,                
+  *                                                system frequency up to 151 MHz.
+  * @note To update the system clock frequency(SYSCLK):
+  *        - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig().
+  *        - Call the HAL_RCC_OscConfig() to configure the PLL.
+  *        - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale.
+  *        - Set the new system clock frequency using the HAL_RCC_ClockConfig().
+  * @note The scale can be modified only when the HSI or HSE clock source is selected 
+  *        as system clock source, otherwise the API returns HAL_ERROR.  
+  * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits
+  *       value in the PWR_CR1 register are not taken in account.
+  * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2.
+  * @note The new voltage scale is active only when the PLL is ON.  
+  * @retval HAL Status
+  */
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
+{
+  uint32_t tickstart = 0;
+
+  assert_param(IS_PWR_REGULATOR_VOLTAGE(VoltageScaling));
+
+  /* Enable Power ctrl clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* Check if the PLL is used as system clock or not */
+  if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
+  {
+    /* Disable the main PLL */
+    __HAL_RCC_PLL_DISABLE();
+    
+    /* Get Start Tick */
+    tickstart = HAL_GetTick();    
+    /* Wait till PLL is disabled */  
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* Set Range */
+    __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
+    
+    /* Enable the main PLL */
+    __HAL_RCC_PLL_ENABLE();
+    
+    /* Get Start Tick */
+    tickstart = HAL_GetTick();
+    /* Wait till PLL is ready */  
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      } 
+    }
+    
+    /* Get Start Tick */
+    tickstart = HAL_GetTick();
+    while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
+    {
+      if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      } 
+    }
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_pwr_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,280 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_pwr_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of PWR HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_PWR_EX_H
+#define __STM32F7xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWREx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+  * @{
+  */
+/** @defgroup PWREx_WakeUp_Pins PWREx Wake Up Pins
+  * @{
+  */
+#define PWR_WAKEUP_PIN1                PWR_CSR2_EWUP1
+#define PWR_WAKEUP_PIN2                PWR_CSR2_EWUP2
+#define PWR_WAKEUP_PIN3                PWR_CSR2_EWUP3
+#define PWR_WAKEUP_PIN4                PWR_CSR2_EWUP4
+#define PWR_WAKEUP_PIN5                PWR_CSR2_EWUP5
+#define PWR_WAKEUP_PIN6                PWR_CSR2_EWUP6
+#define PWR_WAKEUP_PIN1_HIGH           PWR_CSR2_EWUP1
+#define PWR_WAKEUP_PIN2_HIGH           PWR_CSR2_EWUP2
+#define PWR_WAKEUP_PIN3_HIGH           PWR_CSR2_EWUP3
+#define PWR_WAKEUP_PIN4_HIGH           PWR_CSR2_EWUP4
+#define PWR_WAKEUP_PIN5_HIGH           PWR_CSR2_EWUP5
+#define PWR_WAKEUP_PIN6_HIGH           PWR_CSR2_EWUP6
+#define PWR_WAKEUP_PIN1_LOW            (uint32_t)((PWR_CR2_WUPP1<<6) | PWR_CSR2_EWUP1)
+#define PWR_WAKEUP_PIN2_LOW            (uint32_t)((PWR_CR2_WUPP2<<6) | PWR_CSR2_EWUP2)
+#define PWR_WAKEUP_PIN3_LOW            (uint32_t)((PWR_CR2_WUPP3<<6) | PWR_CSR2_EWUP3)
+#define PWR_WAKEUP_PIN4_LOW            (uint32_t)((PWR_CR2_WUPP4<<6) | PWR_CSR2_EWUP4)
+#define PWR_WAKEUP_PIN5_LOW            (uint32_t)((PWR_CR2_WUPP5<<6) | PWR_CSR2_EWUP5)
+#define PWR_WAKEUP_PIN6_LOW            (uint32_t)((PWR_CR2_WUPP6<<6) | PWR_CSR2_EWUP6)
+
+/**
+  * @}
+  */
+	
+/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_UNDERDRIVE_ON                       PWR_CR1_MRUDS
+#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON                   ((uint32_t)(PWR_CR1_LPDS | PWR_CR1_LPUDS))
+/**
+  * @}
+  */ 
+  
+/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
+  * @{
+  */
+#define PWR_FLAG_ODRDY                  PWR_CSR1_ODRDY
+#define PWR_FLAG_ODSWRDY                PWR_CSR1_ODSWRDY
+#define PWR_FLAG_UDRDY                  PWR_CSR1_UDSWRDY
+/**
+  * @}
+  */
+	
+/** @defgroup PWREx_Wakeup_Pins_Flag PWREx Wake Up Pin Flags
+  * @{
+  */
+#define PWR_WAKEUP_PIN_FLAG1            PWR_CSR2_WUPF1
+#define PWR_WAKEUP_PIN_FLAG2            PWR_CSR2_WUPF2
+#define PWR_WAKEUP_PIN_FLAG3            PWR_CSR2_WUPF3
+#define PWR_WAKEUP_PIN_FLAG4            PWR_CSR2_WUPF4
+#define PWR_WAKEUP_PIN_FLAG5            PWR_CSR2_WUPF5
+#define PWR_WAKEUP_PIN_FLAG6            PWR_CSR2_WUPF6
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macro PWREx Exported Macro
+  *  @{
+  */
+/** @brief Macros to enable or disable the Over drive mode.
+  */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODEN)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODEN))
+
+/** @brief Macros to enable or disable the Over drive switching.
+  */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODSWEN)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODSWEN))
+
+/** @brief Macros to enable or disable the Under drive mode.
+  * @note  This mode is enabled only with STOP low power mode.
+  *        In this mode, the 1.2V domain is preserved in reduced leakage mode. This 
+  *        mode is only available when the main regulator or the low power regulator 
+  *        is in low voltage mode.      
+  * @note  If the Under-drive mode was enabled, it is automatically disabled after 
+  *        exiting Stop mode. 
+  *        When the voltage regulator operates in Under-drive mode, an additional  
+  *        startup delay is induced when waking up from Stop mode.
+  */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_UDEN))
+
+/** @brief  Check PWR flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+  *                                 is ready 
+  *            @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+  *                                   switching is ready  
+  *            @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+  *                                 is enabled in Stop mode
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+  */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR1 |= PWR_FLAG_UDRDY)
+
+/** @brief  Check Wake Up flag is set or not.
+  * @param  __WUFLAG__: specifies the Wake Up flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
+  *            @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
+  *            @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
+  *            @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
+  *            @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
+  *            @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11          
+  */
+#define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->CSR2 & (__WUFLAG__))
+
+/** @brief  Clear the WakeUp pins flags.
+  * @param  __WUFLAG__: specifies the Wake Up pin flag to clear.
+  *          This parameter can be one of the following values:
+  *            @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
+  *            @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
+  *            @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
+  *            @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
+  *            @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
+  *            @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11          
+  */
+#define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__) (PWR->CR2 |=  (__WUFLAG__))
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+  *  @{
+  */
+ 
+/** @addtogroup PWREx_Exported_Functions_Group1
+  * @{
+  */
+uint32_t HAL_PWREx_GetVoltageRange(void);
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
+
+void HAL_PWREx_EnableFlashPowerDown(void);
+void HAL_PWREx_DisableFlashPowerDown(void); 
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); 
+
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
+
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Macros PWREx Private Macros
+  * @{
+  */
+
+/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
+  * @{
+  */
+#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
+                                                ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
+#define IS_PWR_WAKEUP_PIN(__PIN__)         (((__PIN__) == PWR_WAKEUP_PIN1)       || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN2)       || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN3)       || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN4)       || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN5)       || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN6)  		 || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN1_HIGH)  || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN2_HIGH)  || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN3_HIGH)  || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN4_HIGH)  || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN5_HIGH)  || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN6_HIGH)  || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN1_LOW)   || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN2_LOW)   || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN3_LOW)   || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN4_LOW)   || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN5_LOW)	 || \
+                                            ((__PIN__) == PWR_WAKEUP_PIN6_LOW))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_qspi.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1970 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_qspi.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   QSPI HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the QuadSPI interface (QSPI).
+  *           + Initialization and de-initialization functions
+  *           + Indirect functional mode management
+  *           + Memory-mapped functional mode management
+  *           + Auto-polling functional mode management
+  *           + Interrupts and flags management
+  *           + DMA channel configuration for indirect functional mode
+  *           + Errors management and abort functionality
+  *
+  *
+  @verbatim
+ ===============================================================================
+                        ##### How to use this driver #####
+ ===============================================================================
+  [..]
+    *** Initialization ***
+    ======================
+    [..]
+      (#) As prerequisite, fill in the HAL_QSPI_MspInit() :
+        (++) Enable QuadSPI clock interface with __HAL_RCC_QSPI_CLK_ENABLE().
+        (++) Reset QuadSPI IP with __HAL_RCC_QSPI_FORCE_RESET() and __HAL_RCC_QSPI_RELEASE_RESET().
+        (++) Enable the clocks for the QuadSPI GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE().
+        (++) Configure these QuadSPI pins in alternate mode using HAL_GPIO_Init().
+        (++) If interrupt mode is used, enable and configure QuadSPI global
+            interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+        (++) If DMA mode is used, enable the clocks for the QuadSPI DMA channel 
+            with __HAL_RCC_DMAx_CLK_ENABLE(), configure DMA with HAL_DMA_Init(), 
+            link it with QuadSPI handle using __HAL_LINKDMA(), enable and configure 
+            DMA channel global interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
+      (#) Configure the flash size, the clock prescaler, the fifo threshold, the
+          clock mode, the sample shifting and the CS high time using the HAL_QSPI_Init() function.
+
+    *** Indirect functional mode ***
+    ================================
+    [..]
+      (#) Configure the command sequence using the HAL_QSPI_Command() or HAL_QSPI_Command_IT() 
+          functions :
+         (++) Instruction phase : the mode used and if present the instruction opcode.
+         (++) Address phase : the mode used and if present the size and the address value.
+         (++) Alternate-bytes phase : the mode used and if present the size and the alternate 
+             bytes values.
+         (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+         (++) Data phase : the mode used and if present the number of bytes.
+         (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay 
+             if activated.
+         (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+      (#) If no data is required for the command, it is sent directly to the memory :
+         (++) In polling mode, the output of the function is done when the transfer is complete.
+         (++) In interrupt mode, HAL_QSPI_CmdCpltCallback() will be called when the transfer is complete.
+      (#) For the indirect write mode, use HAL_QSPI_Transmit(), HAL_QSPI_Transmit_DMA() or 
+          HAL_QSPI_Transmit_IT() after the command configuration :
+         (++) In polling mode, the output of the function is done when the transfer is complete.
+         (++) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold 
+             is reached and HAL_QSPI_TxCpltCallback() will be called when the transfer is complete.
+         (++) In DMA mode, HAL_QSPI_TxHalfCpltCallback() will be called at the half transfer and 
+             HAL_QSPI_TxCpltCallback() will be called when the transfer is complete.
+      (#) For the indirect read mode, use HAL_QSPI_Receive(), HAL_QSPI_Receive_DMA() or 
+          HAL_QSPI_Receive_IT() after the command configuration :
+         (++) In polling mode, the output of the function is done when the transfer is complete.
+         (++) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold 
+             is reached and HAL_QSPI_RxCpltCallback() will be called when the transfer is complete.
+         (++) In DMA mode, HAL_QSPI_RxHalfCpltCallback() will be called at the half transfer and 
+             HAL_QSPI_RxCpltCallback() will be called when the transfer is complete.
+
+    *** Auto-polling functional mode ***
+    ====================================
+    [..]
+      (#) Configure the command sequence and the auto-polling functional mode using the 
+          HAL_QSPI_AutoPolling() or HAL_QSPI_AutoPolling_IT() functions :
+         (++) Instruction phase : the mode used and if present the instruction opcode.
+         (++) Address phase : the mode used and if present the size and the address value.
+         (++) Alternate-bytes phase : the mode used and if present the size and the alternate 
+             bytes values.
+         (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+         (++) Data phase : the mode used.
+         (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay 
+             if activated.
+         (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+         (++) The size of the status bytes, the match value, the mask used, the match mode (OR/AND),
+             the polling interval and the automatic stop activation.
+      (#) After the configuration :
+         (++) In polling mode, the output of the function is done when the status match is reached. The
+             automatic stop is activated to avoid an infinite loop.
+         (++) In interrupt mode, HAL_QSPI_StatusMatchCallback() will be called each time the status match is reached.
+
+    *** Memory-mapped functional mode ***
+    =====================================
+    [..]
+      (#) Configure the command sequence and the memory-mapped functional mode using the 
+          HAL_QSPI_MemoryMapped() functions :
+         (++) Instruction phase : the mode used and if present the instruction opcode.
+         (++) Address phase : the mode used and the size.
+         (++) Alternate-bytes phase : the mode used and if present the size and the alternate 
+             bytes values.
+         (++) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
+         (++) Data phase : the mode used.
+         (++) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay 
+             if activated.
+         (++) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
+         (++) The timeout activation and the timeout period.
+      (#) After the configuration, the QuadSPI will be used as soon as an access on the AHB is done on 
+          the address range. HAL_QSPI_TimeOutCallback() will be called when the timeout expires.
+
+    *** Errors management and abort functionality ***
+    ==================================================
+    [..]
+      (#) HAL_QSPI_GetError() function gives the error raised during the last operation.
+      (#) HAL_QSPI_Abort() function aborts any on-going operation and flushes the fifo.
+      (#) HAL_QSPI_GetState() function gives the current state of the HAL QuadSPI driver.
+
+    *** Workarounds linked to Silicon Limitation ***
+    ====================================================
+    [..]
+      (#) Workarounds Implemented inside HAL Driver
+         (++) Extra data written in the FIFO at the end of a read transfer
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup QSPI QSPI
+  * @brief HAL QSPI module driver
+  * @{
+  */
+#ifdef HAL_QSPI_MODULE_ENABLED
+    
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup QSPI_Private_Constants 
+  * @{
+  */
+#define QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE ((uint32_t)0x00000000)          /*!<Indirect write mode*/
+#define QSPI_FUNCTIONAL_MODE_INDIRECT_READ  ((uint32_t)QUADSPI_CCR_FMODE_0) /*!<Indirect read mode*/
+#define QSPI_FUNCTIONAL_MODE_AUTO_POLLING   ((uint32_t)QUADSPI_CCR_FMODE_1) /*!<Automatic polling mode*/
+#define QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED  ((uint32_t)QUADSPI_CCR_FMODE)   /*!<Memory-mapped mode*/
+/**
+  * @}
+  */
+  
+/* Private macro -------------------------------------------------------------*/
+/** @addtogroup QSPI_Private_Macros QSPI Private Macros
+  * @{
+  */
+#define IS_QSPI_FUNCTIONAL_MODE(MODE) (((MODE) == QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE) || \
+                                       ((MODE) == QSPI_FUNCTIONAL_MODE_INDIRECT_READ)  || \
+                                       ((MODE) == QSPI_FUNCTIONAL_MODE_AUTO_POLLING)   || \
+                                       ((MODE) == QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED))
+/**
+  * @}
+  */
+                                         
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup QSPI_Private_Functions QSPI Private Functions
+  * @{
+  */
+static void QSPI_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMATxCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void QSPI_DMAError(DMA_HandleTypeDef *hdma); 
+static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Flag, FlagStatus State, uint32_t Timeout);
+static void QSPI_Config(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t FunctionalMode);
+/**
+  * @}
+  */
+  
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup QSPI_Exported_Functions QSPI Exported Functions
+  * @{
+  */
+
+/** @defgroup QSPI_Exported_Functions_Group1 Initialization/de-initialization functions 
+  *  @brief    Initialization and Configuration functions 
+  *
+@verbatim    
+===============================================================================
+            ##### Initialization and Configuration functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to :
+      (+) Initialize the QuadSPI.
+      (+) De-initialize the QuadSPI.
+      
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Initializes the QSPI mode according to the specified parameters
+  *        in the QSPI_InitTypeDef and creates the associated handle.
+  * @param hqspi: qspi handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Init(QSPI_HandleTypeDef *hqspi)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  
+  /* Check the QSPI handle allocation */
+  if(hqspi == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_QSPI_ALL_INSTANCE(hqspi->Instance));
+  assert_param(IS_QSPI_CLOCK_PRESCALER(hqspi->Init.ClockPrescaler));
+  assert_param(IS_QSPI_FIFO_THRESHOLD(hqspi->Init.FifoThreshold));
+  assert_param(IS_QSPI_SSHIFT(hqspi->Init.SampleShifting));
+  assert_param(IS_QSPI_FLASH_SIZE(hqspi->Init.FlashSize));
+  assert_param(IS_QSPI_CS_HIGH_TIME(hqspi->Init.ChipSelectHighTime));
+  assert_param(IS_QSPI_CLOCK_MODE(hqspi->Init.ClockMode));
+  assert_param(IS_QSPI_DUAL_FLASH_MODE(hqspi->Init.DualFlash));
+
+  if (hqspi->Init.DualFlash != QSPI_DUALFLASH_ENABLE )
+  {
+    assert_param(IS_QSPI_FLASH_ID(hqspi->Init.FlashID));
+  }
+  
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+    
+  if(hqspi->State == HAL_QSPI_STATE_RESET)
+  { 
+    /* Allocate lock resource and initialize it */
+    hqspi->Lock = HAL_UNLOCKED;
+     
+    /* Init the low level hardware : GPIO, CLOCK */
+    HAL_QSPI_MspInit(hqspi);
+             
+    /* Configure the default timeout for the QSPI memory access */
+    HAL_QSPI_SetTimeout(hqspi, HAL_QPSI_TIMEOUT_DEFAULT_VALUE);
+  }
+  
+  /* Configure QSPI FIFO Threshold */
+  MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FTHRES, ((hqspi->Init.FifoThreshold - 1) << 8));
+
+  /* Wait till BUSY flag reset */
+  status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
+  
+   if(status == HAL_OK)
+  {
+                
+    /* Configure QSPI Clock Prescaler and Sample Shift */
+    MODIFY_REG(hqspi->Instance->CR,(QUADSPI_CR_PRESCALER | QUADSPI_CR_SSHIFT | QUADSPI_CR_FSEL | QUADSPI_CR_DFM), ((hqspi->Init.ClockPrescaler << 24)| hqspi->Init.SampleShifting | hqspi->Init.FlashID| hqspi->Init.DualFlash ));
+        
+    /* Configure QSPI Flash Size, CS High Time and Clock Mode */
+    MODIFY_REG(hqspi->Instance->DCR, (QUADSPI_DCR_FSIZE | QUADSPI_DCR_CSHT | QUADSPI_DCR_CKMODE), 
+               ((hqspi->Init.FlashSize << 16) | hqspi->Init.ChipSelectHighTime | hqspi->Init.ClockMode));
+    
+    /* Enable the QSPI peripheral */
+    __HAL_QSPI_ENABLE(hqspi);
+  
+    /* Set QSPI error code to none */
+    hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;  
+
+    /* Initialize the QSPI state */
+    hqspi->State = HAL_QSPI_STATE_READY;
+  }
+  
+  /* Release Lock */
+  __HAL_UNLOCK(hqspi);
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief DeInitializes the QSPI peripheral 
+  * @param hqspi: qspi handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_DeInit(QSPI_HandleTypeDef *hqspi)
+{
+  /* Check the QSPI handle allocation */
+  if(hqspi == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  /* Disable the QSPI Peripheral Clock */
+  __HAL_QSPI_DISABLE(hqspi);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+  HAL_QSPI_MspDeInit(hqspi);
+
+  /* Set QSPI error code to none */
+  hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+  /* Initialize the QSPI state */
+  hqspi->State = HAL_QSPI_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hqspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief QSPI MSP Init
+  * @param hqspi: QSPI handle
+  * @retval None
+  */
+ __weak void HAL_QSPI_MspInit(QSPI_HandleTypeDef *hqspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hqspi);
+  
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_QSPI_MspInit can be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief QSPI MSP DeInit
+  * @param hqspi: QSPI handle
+  * @retval None
+  */
+ __weak void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hqspi);
+  
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_QSPI_MspDeInit can be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Exported_Functions_Group2 IO operation functions 
+  *  @brief QSPI Transmit/Receive functions 
+  *
+@verbatim   
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+       [..]
+    This subsection provides a set of functions allowing to :
+      (+) Handle the interrupts.
+      (+) Handle the command sequence.
+      (+) Transmit data in blocking, interrupt or DMA mode.
+      (+) Receive data in blocking, interrupt or DMA mode.
+      (+) Manage the auto-polling functional mode.
+      (+) Manage the memory-mapped functional mode.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief This function handles QSPI interrupt request.
+  * @param hqspi: QSPI handle
+  * @retval None.
+  */
+void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi)
+{
+  __IO uint32_t *data_reg;
+  uint32_t flag = 0, itsource = 0;
+
+  /* QSPI FIFO Threshold interrupt occurred ----------------------------------*/
+  flag     = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT);
+  itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_FT);
+  
+  if((flag != RESET) && (itsource != RESET))
+  {
+    data_reg = &hqspi->Instance->DR;
+
+    if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX)
+    {
+      /* Transmission process */
+      while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != 0)
+      {
+        if (hqspi->TxXferCount > 0)
+        {
+          /* Fill the FIFO until it is full */
+          *(__IO uint8_t *)data_reg = *hqspi->pTxBuffPtr++;
+          hqspi->TxXferCount--;
+        }
+        else
+        {
+          /* No more data available for the transfer */
+          break;
+        }
+      }
+    }
+    else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX)
+    {
+      /* Receiving Process */
+      while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != 0)
+      {
+        if (hqspi->RxXferCount > 0)
+        {
+          /* Read the FIFO until it is empty */
+          *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
+          hqspi->RxXferCount--;
+        }
+        else
+        {
+          /* All data have been received for the transfer */
+          break;
+        }
+      }
+    }
+    
+    /* FIFO Threshold callback */
+    HAL_QSPI_FifoThresholdCallback(hqspi);
+  }
+
+  /* QSPI Transfer Complete interrupt occurred -------------------------------*/
+  flag     = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_TC);
+  itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_TC);
+  
+  if((flag != RESET) && (itsource != RESET))
+  {
+    /* Clear interrupt */
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+    /* Disable the QSPI FIFO Threshold, Transfer Error and Transfer complete Interrupts */
+    __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT);
+    
+    /* Transfer complete callback */
+    if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX)
+    {
+      /* Clear Busy bit */
+      HAL_QSPI_Abort(hqspi);
+      
+      /* TX Complete callback */
+      HAL_QSPI_TxCpltCallback(hqspi);
+    }
+    else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX)
+    {
+      data_reg = &hqspi->Instance->DR;
+      while(READ_BIT(hqspi->Instance->SR, QUADSPI_SR_FLEVEL) != 0)
+      {
+        if (hqspi->RxXferCount > 0)
+        {
+          /* Read the last data received in the FIFO until it is empty */
+          *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
+          hqspi->RxXferCount--;
+        }
+        else
+        {
+          /* All data have been received for the transfer */
+          break;
+        }
+      }
+
+      /* Workaround - Extra data written in the FIFO at the end of a read transfer */
+      HAL_QSPI_Abort(hqspi);
+      
+      /* RX Complete callback */
+      HAL_QSPI_RxCpltCallback(hqspi);
+    }
+    else if(hqspi->State == HAL_QSPI_STATE_BUSY)
+    {
+      /* Command Complete callback */
+      HAL_QSPI_CmdCpltCallback(hqspi);
+    }
+
+    /* Change state of QSPI */
+    hqspi->State = HAL_QSPI_STATE_READY;
+  }
+
+  /* QSPI Status Match interrupt occurred ------------------------------------*/
+  flag     = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_SM);
+  itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_SM);
+  
+  if((flag != RESET) && (itsource != RESET))
+  {
+    /* Clear interrupt */
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_SM);
+   
+    /* Check if the automatic poll mode stop is activated */
+    if(READ_BIT(hqspi->Instance->CR, QUADSPI_CR_APMS) != 0)
+    {
+      /* Disable the QSPI FIFO Threshold, Transfer Error and Status Match Interrupts */
+      __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_SM | QSPI_IT_FT | QSPI_IT_TE);
+
+      /* Change state of QSPI */
+      hqspi->State = HAL_QSPI_STATE_READY;
+    }
+
+    /* Status match callback */
+    HAL_QSPI_StatusMatchCallback(hqspi);
+  }
+
+  /* QSPI Transfer Error interrupt occurred ----------------------------------*/
+  flag     = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_TE);
+  itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_TE);
+  
+  if((flag != RESET) && (itsource != RESET))
+  {
+    /* Clear interrupt */
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE);
+    
+    /* Disable all the QSPI Interrupts */
+    __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_SM | QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT);
+
+    /* Set error code */
+    hqspi->ErrorCode |= HAL_QSPI_ERROR_TRANSFER;
+    
+    /* Change state of QSPI */
+    hqspi->State = HAL_QSPI_STATE_ERROR;
+
+    /* Error callback */
+    HAL_QSPI_ErrorCallback(hqspi);
+  }
+
+  /* QSPI Time out interrupt occurred -----------------------------------------*/
+  flag     = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_TO);
+  itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_TO);
+  
+  if((flag != RESET) && (itsource != RESET))
+  {
+    /* Clear interrupt */
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TO);
+    
+    /* Time out callback */
+    HAL_QSPI_TimeOutCallback(hqspi);
+  }
+}
+
+/**
+  * @brief Sets the command configuration. 
+  * @param hqspi: QSPI handle
+  * @param cmd : structure that contains the command configuration information
+  * @param Timeout : Time out duration
+  * @note   This function is used only in Indirect Read or Write Modes
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Command(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  
+  /* Check the parameters */
+  assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+  if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+  {
+    assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+  }
+
+  assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+  if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+  {
+    assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+  }
+
+  assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+  if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+  {
+    assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+  }
+
+  assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+  assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+  assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+  assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+  assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+  
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+  
+ if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+    
+    /* Update QSPI state */
+    hqspi->State = HAL_QSPI_STATE_BUSY;   
+    
+    /* Wait till BUSY flag reset */
+    status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, Timeout);
+    
+    if (status == HAL_OK)
+    {
+      /* Call the configuration function */
+      QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+      
+      if (cmd->DataMode == QSPI_DATA_NONE)
+      {
+        /* When there is no data phase, the transfer start as soon as the configuration is done 
+        so wait until TC flag is set to go back in idle state */
+        if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, Timeout) != HAL_OK)
+        { 
+          status = HAL_TIMEOUT;
+        }
+        else
+        {
+          __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+          
+          /* Update QSPI state */
+          hqspi->State = HAL_QSPI_STATE_READY;   
+        }
+        
+      }
+      else
+      {
+        /* Update QSPI state */
+        hqspi->State = HAL_QSPI_STATE_READY;   
+      }
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;   
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief Sets the command configuration in interrupt mode. 
+  * @param hqspi: QSPI handle
+  * @param cmd : structure that contains the command configuration information
+  * @note   This function is used only in Indirect Read or Write Modes
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Command_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  
+  /* Check the parameters */
+  assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+  if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+  {
+    assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+  }
+
+  assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+  if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+  {
+    assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+  }
+
+  assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+  if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+  {
+    assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+  }
+
+  assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+  assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+  assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+  assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+  assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+  
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+   if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+    
+    /* Update QSPI state */
+    hqspi->State = HAL_QSPI_STATE_BUSY;   
+    
+    /* Wait till BUSY flag reset */
+    status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
+    
+    if (status == HAL_OK)
+    {
+      if (cmd->DataMode == QSPI_DATA_NONE)
+      {
+        /* When there is no data phase, the transfer start as soon as the configuration is done 
+        so activate TC and TE interrupts */
+        /* Enable the QSPI Transfer Error Interrupt */
+        __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_TC);
+      }
+      
+      /* Call the configuration function */
+      QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+      
+      if (cmd->DataMode != QSPI_DATA_NONE)
+      {
+        /* Update QSPI state */
+        hqspi->State = HAL_QSPI_STATE_READY;   
+      }
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;   
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  /* Return function status */
+  return status;
+}
+
+/**
+  * @brief Transmit an amount of data in blocking mode. 
+  * @param hqspi: QSPI handle
+  * @param pData: pointer to data buffer
+  * @param Timeout : Time out duration
+  * @note   This function is used only in Indirect Write Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Transmit(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  __IO uint32_t *data_reg = &hqspi->Instance->DR;
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+  
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    if(pData != NULL )
+    {
+      hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+    
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
+      
+      /* Configure counters and size of the handle */
+      hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->pTxBuffPtr = pData;
+    
+      /* Configure QSPI: CCR register with functional as indirect write */
+      MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+
+      while(hqspi->TxXferCount > 0)
+      {
+        /* Wait until FT flag is set to send data */
+        if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_FT, SET, Timeout) != HAL_OK)
+        { 
+          status = HAL_TIMEOUT;
+          break;
+        }
+
+        *(__IO uint8_t *)data_reg = *hqspi->pTxBuffPtr++;
+        hqspi->TxXferCount--;
+      }
+    
+      if (status == HAL_OK)
+      {
+        /* Wait until TC flag is set to go back in idle state */
+        if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, Timeout) != HAL_OK)
+        { 
+          status = HAL_TIMEOUT;
+        }
+        else
+        {
+          /* Clear Transfer Complete bit */
+          __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+          
+          /* Clear Busy bit */
+          status = HAL_QSPI_Abort(hqspi);
+        }
+      }
+    
+      /* Update QSPI state */
+      hqspi->State = HAL_QSPI_STATE_READY;    
+    }
+    else
+    {
+      status = HAL_ERROR;
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  return status;
+}
+
+
+/**
+  * @brief Receive an amount of data in blocking mode 
+  * @param hqspi: QSPI handle
+  * @param pData: pointer to data buffer
+  * @param Timeout : Time out duration
+  * @note   This function is used only in Indirect Read Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Receive(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
+  __IO uint32_t *data_reg = &hqspi->Instance->DR;
+
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+  
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    if(pData != NULL )
+    {
+      hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+    
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
+    
+      /* Configure counters and size of the handle */
+      hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->pRxBuffPtr = pData;
+
+      /* Configure QSPI: CCR register with functional as indirect read */
+      MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+      /* Start the transfer by re-writing the address in AR register */
+      WRITE_REG(hqspi->Instance->AR, addr_reg);
+      
+      while(hqspi->RxXferCount > 0)
+      {
+        /* Wait until FT or TC flag is set to read received data */
+        if(QSPI_WaitFlagStateUntilTimeout(hqspi, (QSPI_FLAG_FT | QSPI_FLAG_TC), SET, Timeout) != HAL_OK)
+        { 
+          status = HAL_TIMEOUT;
+          break;
+        }
+
+        *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
+        hqspi->RxXferCount--;
+      }
+    
+      if (status == HAL_OK)
+      {
+        /* Wait until TC flag is set to go back in idle state */
+        if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, Timeout) != HAL_OK)
+        { 
+          status = HAL_TIMEOUT;
+        }
+        else
+        {
+          /* Clear Transfer Complete bit */
+          __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+          
+          /* Workaround - Extra data written in the FIFO at the end of a read transfer */
+          status = HAL_QSPI_Abort(hqspi);
+        }
+      }
+
+      /* Update QSPI state */
+      hqspi->State = HAL_QSPI_STATE_READY;    
+    }
+    else
+    {
+      status = HAL_ERROR;
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  return status;
+}
+
+/**
+  * @brief  Send an amount of data in interrupt mode 
+  * @param  hqspi: QSPI handle
+  * @param  pData: pointer to data buffer
+  * @note   This function is used only in Indirect Write Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Transmit_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{  
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    if(pData != NULL )
+    {
+      hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
+
+      /* Configure counters and size of the handle */
+      hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->pTxBuffPtr = pData;
+    
+      /* Configure QSPI: CCR register with functional as indirect write */
+      MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+    
+      /* Enable the QSPI transfer error, FIFO threshold and transfer complete Interrupts */
+      __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC);
+      
+    }
+    else
+    {
+      status = HAL_ERROR;
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  return status;
+}
+
+/**
+  * @brief  Receive an amount of data in no-blocking mode with Interrupt
+  * @param  hqspi: QSPI handle
+  * @param  pData: pointer to data buffer
+  * @note   This function is used only in Indirect Read Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Receive_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
+  
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    if(pData != NULL )
+    {
+      hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+    
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
+    
+      /* Configure counters and size of the handle */
+      hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->pRxBuffPtr = pData;
+
+      /* Configure QSPI: CCR register with functional as indirect read */
+      MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+      /* Start the transfer by re-writing the address in AR register */
+      WRITE_REG(hqspi->Instance->AR, addr_reg);
+
+      /* Enable the QSPI transfer error, FIFO threshold and transfer complete Interrupts */
+      __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC);
+    }
+    else
+    {
+      status = HAL_ERROR;
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;   
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  return status;
+}
+
+/**
+  * @brief  Sends an amount of data in non blocking mode with DMA. 
+  * @param  hqspi: QSPI handle
+  * @param  pData: pointer to data buffer
+  * @note   This function is used only in Indirect Write Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Transmit_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t *tmp;
+  
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+  
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    if(pData != NULL ) 
+    {
+      hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
+
+      /* Configure counters and size of the handle */
+      hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->pTxBuffPtr = pData;
+    
+      /* Configure QSPI: CCR register with functional mode as indirect write */
+      MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
+    
+      /* Set the QSPI DMA transfer complete callback */
+      hqspi->hdma->XferCpltCallback = QSPI_DMATxCplt;
+    
+      /* Set the QSPI DMA Half transfer complete callback */
+      hqspi->hdma->XferHalfCpltCallback = QSPI_DMATxHalfCplt;
+    
+      /* Set the DMA error callback */
+      hqspi->hdma->XferErrorCallback = QSPI_DMAError;
+      
+      /* Configure the direction of the DMA */
+      hqspi->hdma->Init.Direction = DMA_MEMORY_TO_PERIPH;
+      MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction);
+
+      /* Enable the QSPI transmit DMA Channel */
+      tmp = (uint32_t*)&pData;
+      HAL_DMA_Start_IT(hqspi->hdma, *(uint32_t*)tmp, (uint32_t)&hqspi->Instance->DR, hqspi->TxXferSize);
+    
+      /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */
+      SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+    }
+    else
+    {
+      status = HAL_OK;
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;   
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  return status;
+}
+                          
+/**
+  * @brief  Receives an amount of data in non blocking mode with DMA. 
+  * @param  hqspi: QSPI handle
+  * @param  pData: pointer to data buffer.
+  * @note   This function is used only in Indirect Read Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_Receive_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  uint32_t *tmp;
+  uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
+  
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+  
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    if(pData != NULL ) 
+    {
+      hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+    
+      /* Update state */
+      hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
+    
+      /* Configure counters and size of the handle */
+      hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
+      hqspi->pRxBuffPtr = pData;
+
+      /* Set the QSPI DMA transfer complete callback */
+      hqspi->hdma->XferCpltCallback = QSPI_DMARxCplt;
+    
+      /* Set the QSPI DMA Half transfer complete callback */
+      hqspi->hdma->XferHalfCpltCallback = QSPI_DMARxHalfCplt;
+    
+      /* Set the DMA error callback */
+      hqspi->hdma->XferErrorCallback = QSPI_DMAError;
+      
+      /* Configure the direction of the DMA */
+      hqspi->hdma->Init.Direction = DMA_PERIPH_TO_MEMORY;
+      MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction);
+
+      /* Enable the DMA Channel */
+      tmp = (uint32_t*)&pData;
+      HAL_DMA_Start_IT(hqspi->hdma, (uint32_t)&hqspi->Instance->DR, *(uint32_t*)tmp, hqspi->RxXferSize);
+    
+      /* Configure QSPI: CCR register with functional as indirect read */
+      MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
+
+      /* Start the transfer by re-writing the address in AR register */
+      WRITE_REG(hqspi->Instance->AR, addr_reg);
+
+      /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */
+      SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+    }
+    else
+    {
+      status = HAL_ERROR;
+    }
+  }
+  else
+  {
+    status = HAL_BUSY; 
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+
+  return status;
+}
+
+/**
+  * @brief  Configure the QSPI Automatic Polling Mode in blocking mode. 
+  * @param  hqspi: QSPI handle
+  * @param  cmd: structure that contains the command configuration information.
+  * @param  cfg: structure that contains the polling configuration information.
+  * @param  Timeout : Time out duration
+  * @note   This function is used only in Automatic Polling Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_AutoPolling(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  
+  /* Check the parameters */
+  assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+  if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+  {
+    assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+  }
+  
+  assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+  if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+  {
+    assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+  }
+  
+  assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+  if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+  {
+    assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+  }
+  
+  assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+  assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+  
+  assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+  assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+  assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+  
+  assert_param(IS_QSPI_INTERVAL(cfg->Interval));
+  assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize));
+  assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode));
+  
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+  
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    
+    hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+    
+    /* Update state */
+    hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING;
+    
+    /* Wait till BUSY flag reset */
+    status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, Timeout);
+    
+    if (status == HAL_OK)
+    {
+      /* Configure QSPI: PSMAR register with the status match value */
+      WRITE_REG(hqspi->Instance->PSMAR, cfg->Match);
+      
+      /* Configure QSPI: PSMKR register with the status mask value */
+      WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask);
+      
+      /* Configure QSPI: PIR register with the interval value */
+      WRITE_REG(hqspi->Instance->PIR, cfg->Interval);
+      
+      /* Configure QSPI: CR register with Match mode and Automatic stop enabled 
+      (otherwise there will be an infinite loop in blocking mode) */
+      MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS), 
+                 (cfg->MatchMode | QSPI_AUTOMATIC_STOP_ENABLE));
+      
+      /* Call the configuration function */
+      cmd->NbData = cfg->StatusBytesSize;
+      QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING);
+      
+      /* Wait until SM flag is set to go back in idle state */
+      if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_SM, SET, Timeout) != HAL_OK)
+      { 
+        status = HAL_TIMEOUT;
+      }
+      else
+      {
+        __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_SM);
+        
+        /* Update state */
+        hqspi->State = HAL_QSPI_STATE_READY;
+      }
+    }
+  }
+  else
+  {
+    status = HAL_BUSY;   
+  }
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+  
+  /* Return function status */
+  return status;  
+}
+
+/**
+* @brief  Configure the QSPI Automatic Polling Mode in non-blocking mode. 
+* @param  hqspi: QSPI handle
+* @param  cmd: structure that contains the command configuration information.
+* @param  cfg: structure that contains the polling configuration information.
+* @note   This function is used only in Automatic Polling Mode
+* @retval HAL status
+*/
+HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  
+  /* Check the parameters */
+  assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+  if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+  {
+    assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+  }
+  
+  assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+  if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+  {
+    assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+  }
+  
+  assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+  if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+  {
+    assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+  }
+  
+  assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+  assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+  
+  assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+  assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+  assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+  
+  assert_param(IS_QSPI_INTERVAL(cfg->Interval));
+  assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize));
+  assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode));
+  assert_param(IS_QSPI_AUTOMATIC_STOP(cfg->AutomaticStop));
+  
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+  
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+    
+    /* Update state */
+    hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING;
+    
+    /* Wait till BUSY flag reset */
+    status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
+    
+    if (status == HAL_OK)
+    {
+      /* Configure QSPI: PSMAR register with the status match value */
+      WRITE_REG(hqspi->Instance->PSMAR, cfg->Match);
+      
+      /* Configure QSPI: PSMKR register with the status mask value */
+      WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask);
+      
+      /* Configure QSPI: PIR register with the interval value */
+      WRITE_REG(hqspi->Instance->PIR, cfg->Interval);
+      
+      /* Configure QSPI: CR register with Match mode and Automatic stop mode */
+      MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS), 
+                 (cfg->MatchMode | cfg->AutomaticStop));
+      
+      /* Clear interrupt */
+      __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE | QSPI_FLAG_SM);
+      
+      /* Enable the QSPI Transfer Error and status match Interrupt */
+      __HAL_QSPI_ENABLE_IT(hqspi, (QSPI_IT_SM | QSPI_IT_TE));
+      
+      /* Call the configuration function */
+      cmd->NbData = cfg->StatusBytesSize;
+      QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING);
+    }
+  }
+  else
+  {
+    status = HAL_BUSY; 
+  }
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+  
+  /* Return function status */
+  return status;  
+}
+
+/**
+  * @brief  Configure the Memory Mapped mode. 
+  * @param  hqspi: QSPI handle
+  * @param  cmd: structure that contains the command configuration information.
+  * @param  cfg: structure that contains the memory mapped configuration information.
+  * @note   This function is used only in Memory mapped Mode
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+  
+  /* Check the parameters */
+  assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
+  if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+  {
+  assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
+  }
+
+  assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
+  if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+  {
+    assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
+  }
+
+  assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
+  if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+  {
+    assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
+  }
+
+  assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
+  assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
+
+  assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
+  assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
+  assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
+
+  assert_param(IS_QSPI_TIMEOUT_ACTIVATION(cfg->TimeOutActivation));
+  
+  /* Process locked */
+  __HAL_LOCK(hqspi);
+  
+  if(hqspi->State == HAL_QSPI_STATE_READY)
+  {
+    hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
+    
+    /* Update state */
+    hqspi->State = HAL_QSPI_STATE_BUSY_MEM_MAPPED;
+    
+    /* Wait till BUSY flag reset */
+    status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
+  
+  if (status == HAL_OK)
+  {
+    /* Configure QSPI: CR register with time out counter enable */
+    MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_TCEN, cfg->TimeOutActivation);
+
+    if (cfg->TimeOutActivation == QSPI_TIMEOUT_COUNTER_ENABLE)
+    {
+      assert_param(IS_QSPI_TIMEOUT_PERIOD(cfg->TimeOutPeriod));
+
+      /* Configure QSPI: LPTR register with the low-power time out value */
+      WRITE_REG(hqspi->Instance->LPTR, cfg->TimeOutPeriod);
+
+      /* Enable the QSPI TimeOut Interrupt */
+      __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TO);
+    }
+
+    /* Call the configuration function */
+    QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED);
+    
+    }
+  }
+  else
+  {
+    status = HAL_BUSY; 
+    
+  }
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hqspi);
+  
+  /* Return function status */
+  return status;  
+}
+
+/**
+  * @brief  Transfer Error callbacks
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_ErrorCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hqspi);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_QSPI_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Command completed callbacks.
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_CmdCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hqspi);
+  
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_QSPI_CmdCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Transfer completed callbacks.
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_RxCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hqspi);
+  
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_QSPI_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tx Transfer completed callbacks.
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+ __weak void HAL_QSPI_TxCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hqspi);
+  
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_QSPI_TxCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Rx Half Transfer completed callbacks.
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_RxHalfCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hqspi);
+  
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_QSPI_RxHalfCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tx Half Transfer completed callbacks.
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+ __weak void HAL_QSPI_TxHalfCpltCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hqspi);
+  
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_QSPI_TxHalfCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  FIFO Threshold callbacks
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hqspi);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_QSPI_FIFOThresholdCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Status Match callbacks
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_StatusMatchCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hqspi);
+    
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_QSPI_StatusMatchCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Timeout callbacks
+  * @param  hqspi: QSPI handle
+  * @retval None
+  */
+__weak void HAL_QSPI_TimeOutCallback(QSPI_HandleTypeDef *hqspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hqspi);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_QSPI_TimeOutCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Exported_Functions_Group3 Peripheral Control and State functions 
+  *  @brief   QSPI control and State functions 
+  *
+@verbatim   
+ ===============================================================================
+                  ##### Peripheral Control and State functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to :
+      (+) Check in run-time the state of the driver. 
+      (+) Check the error code set during last operation.
+      (+) Abort any operation.
+.....   
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the QSPI state.
+  * @param  hqspi: QSPI handle
+  * @retval HAL state
+  */
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState(QSPI_HandleTypeDef *hqspi)
+{
+  return hqspi->State;
+}
+
+/**
+* @brief  Return the QSPI error code
+* @param  hqspi: QSPI handle
+* @retval QSPI Error Code
+*/
+uint32_t HAL_QSPI_GetError(QSPI_HandleTypeDef *hqspi)
+{
+  return hqspi->ErrorCode;
+}
+
+/**
+* @brief  Abort the current transmission
+* @param  hqspi: QSPI handle
+* @retval HAL status
+*/
+HAL_StatusTypeDef HAL_QSPI_Abort(QSPI_HandleTypeDef *hqspi)
+{
+  HAL_StatusTypeDef status = HAL_ERROR;
+
+  /* Configure QSPI: CR register with Abort request */
+  SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
+
+  /* Wait until TC flag is set to go back in idle state */
+  if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, hqspi->Timeout) != HAL_OK)
+  { 
+    status = HAL_TIMEOUT;
+  }
+  else
+  {
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+    
+    /* Wait until BUSY flag is reset */
+    status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
+
+    /* Update state */
+    hqspi->State = HAL_QSPI_STATE_READY;
+  }
+
+  return status;
+}
+
+/** @brief Set QSPI timeout
+  * @param  hqspi: QSPI handle.
+  * @param  Timeout: Timeout for the QSPI memory access.
+  * @retval None
+  */
+void HAL_QSPI_SetTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Timeout)
+{
+  hqspi->Timeout = Timeout;
+}
+
+/**
+* @}
+*/
+
+/* Private functions ---------------------------------------------------------*/
+ 
+/**
+  * @brief  DMA QSPI receive process complete callback. 
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void QSPI_DMARxCplt(DMA_HandleTypeDef *hdma)  
+{
+  QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hqspi->RxXferCount = 0;
+  
+  /* Wait for QSPI TC Flag */
+  if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, hqspi->Timeout) != HAL_OK)
+  {
+    /* Time out Occurred */ 
+    HAL_QSPI_ErrorCallback(hqspi);
+  }
+  else
+  {
+    /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+    CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+
+    /* Disable the DMA channel */
+    HAL_DMA_Abort(hdma);
+
+    /* Clear Transfer Complete bit */
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+
+    /* Workaround - Extra data written in the FIFO at the end of a read transfer */
+    HAL_QSPI_Abort(hqspi);
+    
+    /* Update state */
+    hqspi->State = HAL_QSPI_STATE_READY;
+    
+    HAL_QSPI_RxCpltCallback(hqspi);
+  }
+}
+
+/**
+  * @brief  DMA QSPI transmit process complete callback. 
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void QSPI_DMATxCplt(DMA_HandleTypeDef *hdma)     
+{
+  QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hqspi->TxXferCount = 0;
+  
+  /* Wait for QSPI TC Flag */
+  if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, hqspi->Timeout) != HAL_OK)
+  {
+    /* Time out Occurred */ 
+    HAL_QSPI_ErrorCallback(hqspi);
+  }
+  else
+  {
+    /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
+    CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
+  
+    /* Disable the DMA channel */
+    HAL_DMA_Abort(hdma);
+
+    /* Clear Transfer Complete bit */
+    __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+    
+    /* Clear Busy bit */
+    HAL_QSPI_Abort(hqspi);
+
+    /* Update state */
+    hqspi->State = HAL_QSPI_STATE_READY;
+    
+    HAL_QSPI_TxCpltCallback(hqspi);
+  }
+}
+
+/**
+  * @brief  DMA QSPI receive process half complete callback 
+  * @param  hdma : DMA handle
+  * @retval None
+  */
+static void QSPI_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_QSPI_RxHalfCpltCallback(hqspi); 
+}
+
+/**
+  * @brief  DMA QSPI transmit process half complete callback 
+  * @param  hdma : DMA handle
+  * @retval None
+  */
+static void QSPI_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_QSPI_TxHalfCpltCallback(hqspi);
+}
+
+/**
+  * @brief  DMA QSPI communication error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void QSPI_DMAError(DMA_HandleTypeDef *hdma)   
+{
+  QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  hqspi->RxXferCount = 0;
+  hqspi->TxXferCount = 0;
+  hqspi->State       = HAL_QSPI_STATE_ERROR;
+  hqspi->ErrorCode   |= HAL_QSPI_ERROR_DMA;
+
+  HAL_QSPI_ErrorCallback(hqspi);
+}
+
+/**
+  * @brief  This function wait a flag state until time out.
+  * @param  hqspi: QSPI handle
+  * @param  Flag: Flag checked
+  * @param  State: Value of the flag expected
+  * @param  Timeout: Duration of the time out
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Flag,
+                                                        FlagStatus State, uint32_t Timeout)
+{
+  uint32_t tickstart = HAL_GetTick();
+  
+  /* Wait until flag is in expected state */    
+  while((FlagStatus)(__HAL_QSPI_GET_FLAG(hqspi, Flag)) != State)
+  {
+    /* Check for the Timeout */
+    if (Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
+      {
+        hqspi->State     = HAL_QSPI_STATE_ERROR;
+        hqspi->ErrorCode |= HAL_QSPI_ERROR_TIMEOUT;
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function configures the communication registers
+  * @param  hqspi: QSPI handle
+  * @param  cmd: structure that contains the command configuration information
+  * @param  FunctionalMode: functional mode to configured
+  *           This parameter can be one of the following values:
+  *            @arg QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE: Indirect write mode
+  *            @arg QSPI_FUNCTIONAL_MODE_INDIRECT_READ: Indirect read mode
+  *            @arg QSPI_FUNCTIONAL_MODE_AUTO_POLLING: Automatic polling mode
+  *            @arg QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED: Memory-mapped mode  
+  * @retval None
+  */
+static void QSPI_Config(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t FunctionalMode)
+{
+  assert_param(IS_QSPI_FUNCTIONAL_MODE(FunctionalMode));
+
+  if ((cmd->DataMode != QSPI_DATA_NONE) && (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED))
+  {
+    /* Configure QSPI: DLR register with the number of data to read or write */
+    WRITE_REG(hqspi->Instance->DLR, (cmd->NbData - 1));
+  }
+      
+  if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
+  {
+    if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+    {
+      /* Configure QSPI: ABR register with alternate bytes value */
+      WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes);
+
+      if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+      {
+        /*---- Command with instruction, address and alternate bytes ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+                                         cmd->AlternateByteMode | cmd->AddressSize | cmd->AddressMode |
+                                         cmd->InstructionMode | cmd->Instruction | FunctionalMode));
+
+        if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+        {
+          /* Configure QSPI: AR register with address value */
+          WRITE_REG(hqspi->Instance->AR, cmd->Address);
+        }
+      }
+      else
+      {
+        /*---- Command with instruction and alternate bytes ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+                                         cmd->AlternateByteMode | cmd->AddressMode | cmd->InstructionMode | 
+                                         cmd->Instruction | FunctionalMode));
+      }
+    }
+    else
+    {
+      if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+      {
+        /*---- Command with instruction and address ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode | 
+                                         cmd->AddressSize | cmd->AddressMode | cmd->InstructionMode | 
+                                         cmd->Instruction | FunctionalMode));
+
+        if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+        {
+          /* Configure QSPI: AR register with address value */
+          WRITE_REG(hqspi->Instance->AR, cmd->Address);
+        }
+      }
+      else
+      {
+        /*---- Command with only instruction ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode | 
+                                         cmd->AddressMode | cmd->InstructionMode | cmd->Instruction  | 
+                                         FunctionalMode));
+      }
+    }
+  }
+  else
+  {
+    if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
+    {
+      /* Configure QSPI: ABR register with alternate bytes value */
+      WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes);
+
+      if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+      {
+        /*---- Command with address and alternate bytes ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+                                         cmd->AlternateByteMode | cmd->AddressSize | cmd->AddressMode |
+                                         cmd->InstructionMode | FunctionalMode));
+
+        if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+        {
+          /* Configure QSPI: AR register with address value */
+          WRITE_REG(hqspi->Instance->AR, cmd->Address);
+        }
+      }
+      else
+      {
+        /*---- Command with only alternate bytes ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
+                                         cmd->AlternateByteMode | cmd->AddressMode | cmd->InstructionMode | 
+                                         FunctionalMode));
+      }
+    }
+    else
+    {
+      if (cmd->AddressMode != QSPI_ADDRESS_NONE)
+      {
+        /*---- Command with only address ----*/
+        /* Configure QSPI: CCR register with all communications parameters */
+        WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                         cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode | 
+                                         cmd->AddressSize | cmd->AddressMode | cmd->InstructionMode | 
+                                         FunctionalMode));
+
+        if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
+        {
+          /* Configure QSPI: AR register with address value */
+          WRITE_REG(hqspi->Instance->AR, cmd->Address);
+        }
+      }
+      else
+      {
+        /*---- Command with only data phase ----*/
+        if (cmd->DataMode != QSPI_DATA_NONE)
+        {
+          /* Configure QSPI: CCR register with all communications parameters */
+          WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
+                                           cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode | 
+                                           cmd->AddressMode | cmd->InstructionMode | FunctionalMode));
+        }
+      }
+    }
+  }
+}
+/**
+  * @}
+  */
+
+#endif /* HAL_QSPI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_qspi.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,786 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_qspi.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of QSPI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_QSPI_H
+#define __STM32F7xx_HAL_QSPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup QSPI
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup QSPI_Exported_Types QSPI Exported Types
+  * @{
+  */
+  
+/** 
+  * @brief  QSPI Init structure definition  
+  */
+
+typedef struct
+{
+  uint32_t ClockPrescaler;     /* Specifies the prescaler factor for generating clock based on the AHB clock.
+                                  This parameter can be a number between 0 and 255 */ 
+                                  
+  uint32_t FifoThreshold;      /* Specifies the threshold number of bytes in the FIFO (used only in indirect mode)
+                                  This parameter can be a value between 1 and 32 */
+                                  
+  uint32_t SampleShifting;     /* Specifies the Sample Shift. The data is sampled 1/2 clock cycle delay later to 
+                                  take in account external signal delays. (It should be QSPI_SAMPLE_SHIFTING_NONE in DDR mode)
+                                  This parameter can be a value of @ref QSPI_SampleShifting */
+                                  
+  uint32_t FlashSize;          /* Specifies the Flash Size. FlashSize+1 is effectively the number of address bits 
+                                  required to address the flash memory. The flash capacity can be up to 4GB 
+                                  (addressed using 32 bits) in indirect mode, but the addressable space in 
+                                  memory-mapped mode is limited to 256MB
+                                  This parameter can be a number between 0 and 31 */
+                                  
+  uint32_t ChipSelectHighTime; /* Specifies the Chip Select High Time. ChipSelectHighTime+1 defines the minimum number 
+                                  of clock cycles which the chip select must remain high between commands.
+                                  This parameter can be a value of @ref QSPI_ChipSelectHighTime */ 
+                                    
+  uint32_t ClockMode;          /* Specifies the Clock Mode. It indicates the level that clock takes between commands.
+                                  This parameter can be a value of @ref QSPI_ClockMode */
+                                 
+  uint32_t FlashID;            /* Specifies the Flash which will be used,
+                                  This parameter can be a value of @ref QSPI_Flash_Select */
+                                 
+  uint32_t DualFlash;          /* Specifies the Dual Flash Mode State
+                                  This parameter can be a value of @ref QSPI_DualFlash_Mode */                                               
+}QSPI_InitTypeDef;
+
+/** 
+  * @brief HAL QSPI State structures definition  
+  */ 
+typedef enum
+{
+  HAL_QSPI_STATE_RESET             = 0x00,    /*!< Peripheral not initialized                            */
+  HAL_QSPI_STATE_READY             = 0x01,    /*!< Peripheral initialized and ready for use              */
+  HAL_QSPI_STATE_BUSY              = 0x02,    /*!< Peripheral in indirect mode and busy                  */ 
+  HAL_QSPI_STATE_BUSY_INDIRECT_TX  = 0x12,    /*!< Peripheral in indirect mode with transmission ongoing */ 
+  HAL_QSPI_STATE_BUSY_INDIRECT_RX  = 0x22,    /*!< Peripheral in indirect mode with reception ongoing    */
+  HAL_QSPI_STATE_BUSY_AUTO_POLLING = 0x42,    /*!< Peripheral in auto polling mode ongoing               */
+  HAL_QSPI_STATE_BUSY_MEM_MAPPED   = 0x82,    /*!< Peripheral in memory mapped mode ongoing              */
+  HAL_QSPI_STATE_ERROR             = 0x04     /*!< Peripheral in error                                   */
+}HAL_QSPI_StateTypeDef;
+
+/** 
+  * @brief  QSPI Handle Structure definition  
+  */  
+typedef struct
+{
+  QUADSPI_TypeDef            *Instance;        /* QSPI registers base address        */
+  QSPI_InitTypeDef           Init;             /* QSPI communication parameters      */
+  uint8_t                    *pTxBuffPtr;      /* Pointer to QSPI Tx transfer Buffer */
+  __IO uint16_t              TxXferSize;       /* QSPI Tx Transfer size              */
+  __IO uint16_t              TxXferCount;      /* QSPI Tx Transfer Counter           */
+  uint8_t                    *pRxBuffPtr;      /* Pointer to QSPI Rx transfer Buffer */
+  __IO uint16_t              RxXferSize;       /* QSPI Rx Transfer size              */
+  __IO uint16_t              RxXferCount;      /* QSPI Rx Transfer Counter           */
+  DMA_HandleTypeDef          *hdma;            /* QSPI Rx/Tx DMA Handle parameters   */
+  __IO HAL_LockTypeDef       Lock;             /* Locking object                     */
+  __IO HAL_QSPI_StateTypeDef State;            /* QSPI communication state           */
+  __IO uint32_t              ErrorCode;        /* QSPI Error code                    */
+  uint32_t                   Timeout;          /* Timeout for the QSPI memory access */ 
+}QSPI_HandleTypeDef;
+
+/** 
+  * @brief  QSPI Command structure definition  
+  */
+typedef struct
+{
+  uint32_t Instruction;        /* Specifies the Instruction to be sent
+                                  This parameter can be a value (8-bit) between 0x00 and 0xFF */
+  uint32_t Address;            /* Specifies the Address to be sent (Size from 1 to 4 bytes according AddressSize)
+                                  This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
+  uint32_t AlternateBytes;     /* Specifies the Alternate Bytes to be sent (Size from 1 to 4 bytes according AlternateBytesSize)
+                                  This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
+  uint32_t AddressSize;        /* Specifies the Address Size
+                                  This parameter can be a value of @ref QSPI_AddressSize */
+  uint32_t AlternateBytesSize; /* Specifies the Alternate Bytes Size
+                                  This parameter can be a value of @ref QSPI_AlternateBytesSize */
+  uint32_t DummyCycles;        /* Specifies the Number of Dummy Cycles.
+                                  This parameter can be a number between 0 and 31 */
+  uint32_t InstructionMode;    /* Specifies the Instruction Mode
+                                  This parameter can be a value of @ref QSPI_InstructionMode */
+  uint32_t AddressMode;        /* Specifies the Address Mode
+                                  This parameter can be a value of @ref QSPI_AddressMode */
+  uint32_t AlternateByteMode;  /* Specifies the Alternate Bytes Mode
+                                  This parameter can be a value of @ref QSPI_AlternateBytesMode */
+  uint32_t DataMode;           /* Specifies the Data Mode (used for dummy cycles and data phases)
+                                  This parameter can be a value of @ref QSPI_DataMode */
+  uint32_t NbData;             /* Specifies the number of data to transfer. 
+                                  This parameter can be any value between 0 and 0xFFFFFFFF (0 means undefined length 
+                                  until end of memory)*/
+  uint32_t DdrMode;            /* Specifies the double data rate mode for address, alternate byte and data phase
+                                  This parameter can be a value of @ref QSPI_DdrMode */
+  uint32_t DdrHoldHalfCycle;   /* Specifies the DDR hold half cycle. It delays the data output by one half of 
+                                  system clock in DDR mode.
+                                  This parameter can be a value of @ref QSPI_DdrHoldHalfCycle */
+  uint32_t SIOOMode;          /* Specifies the send instruction only once mode
+                                  This parameter can be a value of @ref QSPI_SIOOMode */
+}QSPI_CommandTypeDef;
+
+/** 
+  * @brief  QSPI Auto Polling mode configuration structure definition  
+  */
+typedef struct
+{
+  uint32_t Match;              /* Specifies the value to be compared with the masked status register to get a match.
+                                  This parameter can be any value between 0 and 0xFFFFFFFF */
+  uint32_t Mask;               /* Specifies the mask to be applied to the status bytes received. 
+                                  This parameter can be any value between 0 and 0xFFFFFFFF */
+  uint32_t Interval;           /* Specifies the number of clock cycles between two read during automatic polling phases.
+                                  This parameter can be any value between 0 and 0xFFFF */
+  uint32_t StatusBytesSize;    /* Specifies the size of the status bytes received.
+                                  This parameter can be any value between 1 and 4 */
+  uint32_t MatchMode;          /* Specifies the method used for determining a match.
+                                  This parameter can be a value of @ref QSPI_MatchMode */
+  uint32_t AutomaticStop;      /* Specifies if automatic polling is stopped after a match.
+                                  This parameter can be a value of @ref QSPI_AutomaticStop */
+}QSPI_AutoPollingTypeDef;
+                           
+/** 
+  * @brief  QSPI Memory Mapped mode configuration structure definition  
+  */
+typedef struct
+{
+  uint32_t TimeOutPeriod;      /* Specifies the number of clock to wait when the FIFO is full before to release the chip select.
+                                  This parameter can be any value between 0 and 0xFFFF */
+  uint32_t TimeOutActivation;  /* Specifies if the time out counter is enabled to release the chip select. 
+                                  This parameter can be a value of @ref QSPI_TimeOutActivation */
+}QSPI_MemoryMappedTypeDef;                                     
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Constants QSPI Exported Constants
+  * @{
+  */
+/** @defgroup QSPI_ErrorCode QSPI Error Code
+  * @{
+  */ 
+#define HAL_QSPI_ERROR_NONE            ((uint32_t)0x00000000) /*!< No error           */
+#define HAL_QSPI_ERROR_TIMEOUT         ((uint32_t)0x00000001) /*!< Timeout error      */
+#define HAL_QSPI_ERROR_TRANSFER        ((uint32_t)0x00000002) /*!< Transfer error     */
+#define HAL_QSPI_ERROR_DMA             ((uint32_t)0x00000004) /*!< DMA transfer error */
+/**
+  * @}
+  */ 
+  
+/** @defgroup QSPI_SampleShifting QSPI Sample Shifting
+  * @{
+  */
+#define QSPI_SAMPLE_SHIFTING_NONE           ((uint32_t)0x00000000)        /*!<No clock cycle shift to sample data*/
+#define QSPI_SAMPLE_SHIFTING_HALFCYCLE      ((uint32_t)QUADSPI_CR_SSHIFT) /*!<1/2 clock cycle shift to sample data*/
+/**
+  * @}
+  */ 
+
+/** @defgroup QSPI_ChipSelectHighTime QSPI Chip Select High Time
+  * @{
+  */
+#define QSPI_CS_HIGH_TIME_1_CYCLE           ((uint32_t)0x00000000)                              /*!<nCS stay high for at least 1 clock cycle between commands*/
+#define QSPI_CS_HIGH_TIME_2_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_0)                      /*!<nCS stay high for at least 2 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_3_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_1)                      /*!<nCS stay high for at least 3 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_4_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_0 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 4 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_5_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_2)                      /*!<nCS stay high for at least 5 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_6_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 6 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_7_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 7 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_8_CYCLE           ((uint32_t)QUADSPI_DCR_CSHT)                        /*!<nCS stay high for at least 8 clock cycles between commands*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_ClockMode QSPI Clock Mode
+  * @{
+  */
+#define QSPI_CLOCK_MODE_0                   ((uint32_t)0x00000000)         /*!<Clk stays low while nCS is released*/
+#define QSPI_CLOCK_MODE_3                   ((uint32_t)QUADSPI_DCR_CKMODE) /*!<Clk goes high while nCS is released*/
+/**
+  * @}
+  */
+  
+/** @defgroup QSPI_Flash_Select QSPI Flash Select
+  * @{
+  */
+#define QSPI_FLASH_ID_1           ((uint32_t)0x00000000)
+#define QSPI_FLASH_ID_2           ((uint32_t)QUADSPI_CR_FSEL)
+/**
+  * @}
+  */  
+
+  /** @defgroup QSPI_DualFlash_Mode  QSPI Dual Flash Mode
+  * @{
+  */
+#define QSPI_DUALFLASH_ENABLE            ((uint32_t)QUADSPI_CR_DFM)
+#define QSPI_DUALFLASH_DISABLE           ((uint32_t)0x00000000) 
+/**
+  * @}
+  */ 
+
+/** @defgroup QSPI_AddressSize QSPI Address Size 
+  * @{
+  */
+#define QSPI_ADDRESS_8_BITS            ((uint32_t)0x00000000)           /*!<8-bit address*/
+#define QSPI_ADDRESS_16_BITS           ((uint32_t)QUADSPI_CCR_ADSIZE_0) /*!<16-bit address*/
+#define QSPI_ADDRESS_24_BITS           ((uint32_t)QUADSPI_CCR_ADSIZE_1) /*!<24-bit address*/
+#define QSPI_ADDRESS_32_BITS           ((uint32_t)QUADSPI_CCR_ADSIZE)   /*!<32-bit address*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_AlternateBytesSize QSPI Alternate Bytes Size
+  * @{
+  */
+#define QSPI_ALTERNATE_BYTES_8_BITS    ((uint32_t)0x00000000)           /*!<8-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_16_BITS   ((uint32_t)QUADSPI_CCR_ABSIZE_0) /*!<16-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_24_BITS   ((uint32_t)QUADSPI_CCR_ABSIZE_1) /*!<24-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_32_BITS   ((uint32_t)QUADSPI_CCR_ABSIZE)   /*!<32-bit alternate bytes*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_InstructionMode QSPI Instruction Mode
+* @{
+*/
+#define QSPI_INSTRUCTION_NONE          ((uint32_t)0x00000000)          /*!<No instruction*/
+#define QSPI_INSTRUCTION_1_LINE        ((uint32_t)QUADSPI_CCR_IMODE_0) /*!<Instruction on a single line*/
+#define QSPI_INSTRUCTION_2_LINES       ((uint32_t)QUADSPI_CCR_IMODE_1) /*!<Instruction on two lines*/
+#define QSPI_INSTRUCTION_4_LINES       ((uint32_t)QUADSPI_CCR_IMODE)   /*!<Instruction on four lines*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_AddressMode QSPI Address Mode
+* @{
+*/
+#define QSPI_ADDRESS_NONE              ((uint32_t)0x00000000)           /*!<No address*/
+#define QSPI_ADDRESS_1_LINE            ((uint32_t)QUADSPI_CCR_ADMODE_0) /*!<Address on a single line*/
+#define QSPI_ADDRESS_2_LINES           ((uint32_t)QUADSPI_CCR_ADMODE_1) /*!<Address on two lines*/
+#define QSPI_ADDRESS_4_LINES           ((uint32_t)QUADSPI_CCR_ADMODE)   /*!<Address on four lines*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_AlternateBytesMode  QSPI Alternate Bytes Mode
+* @{                                  
+*/
+#define QSPI_ALTERNATE_BYTES_NONE      ((uint32_t)0x00000000)           /*!<No alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_1_LINE    ((uint32_t)QUADSPI_CCR_ABMODE_0) /*!<Alternate bytes on a single line*/
+#define QSPI_ALTERNATE_BYTES_2_LINES   ((uint32_t)QUADSPI_CCR_ABMODE_1) /*!<Alternate bytes on two lines*/
+#define QSPI_ALTERNATE_BYTES_4_LINES   ((uint32_t)QUADSPI_CCR_ABMODE)   /*!<Alternate bytes on four lines*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_DataMode QSPI Data Mode
+  * @{
+  */
+#define QSPI_DATA_NONE                 ((uint32_t)0X00000000)           /*!<No data*/
+#define QSPI_DATA_1_LINE               ((uint32_t)QUADSPI_CCR_DMODE_0) /*!<Data on a single line*/
+#define QSPI_DATA_2_LINES              ((uint32_t)QUADSPI_CCR_DMODE_1) /*!<Data on two lines*/
+#define QSPI_DATA_4_LINES              ((uint32_t)QUADSPI_CCR_DMODE)   /*!<Data on four lines*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_DdrMode QSPI Ddr Mode
+  * @{
+  */
+#define QSPI_DDR_MODE_DISABLE              ((uint32_t)0x00000000)       /*!<Double data rate mode disabled*/
+#define QSPI_DDR_MODE_ENABLE               ((uint32_t)QUADSPI_CCR_DDRM) /*!<Double data rate mode enabled*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_DdrHoldHalfCycle QSPI Ddr HoldHalfCycle
+  * @{
+  */
+#define QSPI_DDR_HHC_ANALOG_DELAY           ((uint32_t)0x00000000)       /*!<Delay the data output using analog delay in DDR mode*/
+#define QSPI_DDR_HHC_HALF_CLK_DELAY         ((uint32_t)QUADSPI_CCR_DHHC) /*!<Delay the data output by 1/2 clock cycle in DDR mode*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_SIOOMode QSPI SIOO Mode
+  * @{
+  */
+#define QSPI_SIOO_INST_EVERY_CMD       ((uint32_t)0x00000000)       /*!<Send instruction on every transaction*/
+#define QSPI_SIOO_INST_ONLY_FIRST_CMD  ((uint32_t)QUADSPI_CCR_SIOO) /*!<Send instruction only for the first command*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_MatchMode QSPI Match Mode
+  * @{
+  */
+#define QSPI_MATCH_MODE_AND                 ((uint32_t)0x00000000)     /*!<AND match mode between unmasked bits*/
+#define QSPI_MATCH_MODE_OR                  ((uint32_t)QUADSPI_CR_PMM) /*!<OR match mode between unmasked bits*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_AutomaticStop QSPI Automatic Stop
+  * @{
+  */
+#define QSPI_AUTOMATIC_STOP_DISABLE        ((uint32_t)0x00000000)      /*!<AutoPolling stops only with abort or QSPI disabling*/
+#define QSPI_AUTOMATIC_STOP_ENABLE         ((uint32_t)QUADSPI_CR_APMS) /*!<AutoPolling stops as soon as there is a match*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_TimeOutActivation QSPI TimeOut Activation
+  * @{
+  */
+#define QSPI_TIMEOUT_COUNTER_DISABLE       ((uint32_t)0x00000000)      /*!<Timeout counter disabled, nCS remains active*/
+#define QSPI_TIMEOUT_COUNTER_ENABLE        ((uint32_t)QUADSPI_CR_TCEN) /*!<Timeout counter enabled, nCS released when timeout expires*/
+/**
+  * @}
+  */  
+
+/** @defgroup QSPI_Flags  QSPI Flags
+  * @{
+  */
+#define QSPI_FLAG_BUSY                      QUADSPI_SR_BUSY /*!<Busy flag: operation is ongoing*/
+#define QSPI_FLAG_TO                        QUADSPI_SR_TOF  /*!<Timeout flag: timeout occurs in memory-mapped mode*/
+#define QSPI_FLAG_SM                        QUADSPI_SR_SMF  /*!<Status match flag: received data matches in autopolling mode*/
+#define QSPI_FLAG_FT                        QUADSPI_SR_FTF  /*!<Fifo threshold flag: Fifo threshold reached or data left after read from memory is complete*/
+#define QSPI_FLAG_TC                        QUADSPI_SR_TCF  /*!<Transfer complete flag: programmed number of data have been transferred or the transfer has been aborted*/
+#define QSPI_FLAG_TE                        QUADSPI_SR_TEF  /*!<Transfer error flag: invalid address is being accessed*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Interrupts  QSPI Interrupts
+  * @{
+  */  
+#define QSPI_IT_TO                          QUADSPI_CR_TOIE /*!<Interrupt on the timeout flag*/
+#define QSPI_IT_SM                          QUADSPI_CR_SMIE /*!<Interrupt on the status match flag*/
+#define QSPI_IT_FT                          QUADSPI_CR_FTIE /*!<Interrupt on the fifo threshold flag*/
+#define QSPI_IT_TC                          QUADSPI_CR_TCIE /*!<Interrupt on the transfer complete flag*/
+#define QSPI_IT_TE                          QUADSPI_CR_TEIE /*!<Interrupt on the transfer error flag*/
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_Timeout_definition QSPI Timeout definition
+  * @{
+  */ 
+#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE ((uint32_t)5000)/* 5 s */
+/**
+  * @}
+  */  
+    
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Macros QSPI Exported Macros
+  * @{
+  */
+
+/** @brief Reset QSPI handle state
+  * @param  __HANDLE__: QSPI handle.
+  * @retval None
+  */
+#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__)           ((__HANDLE__)->State = HAL_QSPI_STATE_RESET)
+
+/** @brief  Enable QSPI
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @retval None
+  */ 
+#define __HAL_QSPI_ENABLE(__HANDLE__)                       SET_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief  Disable QSPI
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @retval None
+  */
+#define __HAL_QSPI_DISABLE(__HANDLE__)                      CLEAR_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief  Enables the specified QSPI interrupt.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __INTERRUPT__: specifies the QSPI interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_IT_TO: QSPI Time out interrupt
+  *            @arg QSPI_IT_SM: QSPI Status match interrupt
+  *            @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+  *            @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+  *            @arg QSPI_IT_TE: QSPI Transfer error interrupt
+  * @retval None
+  */
+#define __HAL_QSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__)     SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+
+/** @brief  Disables the specified QSPI interrupt.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __INTERRUPT__: specifies the QSPI interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_IT_TO: QSPI Timeout interrupt
+  *            @arg QSPI_IT_SM: QSPI Status match interrupt
+  *            @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+  *            @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+  *            @arg QSPI_IT_TE: QSPI Transfer error interrupt
+  * @retval None
+  */
+#define __HAL_QSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__)    CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+/** @brief  Checks whether the specified QSPI interrupt source is enabled.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __INTERRUPT__: specifies the QSPI interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_IT_TO: QSPI Time out interrupt
+  *            @arg QSPI_IT_SM: QSPI Status match interrupt
+  *            @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+  *            @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+  *            @arg QSPI_IT_TE: QSPI Transfer error interrupt
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_QSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) == (__INTERRUPT__)) 
+
+/**
+  * @brief  Get the selected QSPI's flag status.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __FLAG__: specifies the QSPI flag to check.
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_FLAG_BUSY: QSPI Busy flag
+  *            @arg QSPI_FLAG_TO:   QSPI Time out flag
+  *            @arg QSPI_FLAG_SM:   QSPI Status match flag
+  *            @arg QSPI_FLAG_FT:   QSPI FIFO threshold flag
+  *            @arg QSPI_FLAG_TC:   QSPI Transfer complete flag
+  *            @arg QSPI_FLAG_TE:   QSPI Transfer error flag
+  * @retval None
+  */
+#define __HAL_QSPI_GET_FLAG(__HANDLE__, __FLAG__)           (READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) != 0)
+
+/** @brief  Clears the specified QSPI's flag status.
+  * @param  __HANDLE__: specifies the QSPI Handle.
+  * @param  __FLAG__: specifies the QSPI clear register flag that needs to be set
+  *          This parameter can be one of the following values:
+  *            @arg QSPI_FLAG_TO: QSPI Time out flag
+  *            @arg QSPI_FLAG_SM: QSPI Status match flag
+  *            @arg QSPI_FLAG_TC: QSPI Transfer complete flag
+  *            @arg QSPI_FLAG_TE: QSPI Transfer error flag
+  * @retval None
+  */
+#define __HAL_QSPI_CLEAR_FLAG(__HANDLE__, __FLAG__)         WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__))
+/**
+  * @}
+  */
+  
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup QSPI_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef     HAL_QSPI_Init     (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef     HAL_QSPI_DeInit   (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_MspInit  (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi);
+/**
+  * @}
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group2
+  * @{
+  */  
+/* IO operation functions *****************************************************/
+/* QSPI IRQ handler method */
+void                  HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+HAL_StatusTypeDef     HAL_QSPI_Command      (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_Transmit     (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_Receive      (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_Command_IT   (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd);
+HAL_StatusTypeDef     HAL_QSPI_Transmit_IT  (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef     HAL_QSPI_Receive_IT   (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef     HAL_QSPI_Transmit_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef     HAL_QSPI_Receive_DMA  (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+
+/* QSPI status flag polling mode */
+HAL_StatusTypeDef     HAL_QSPI_AutoPolling   (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout);
+HAL_StatusTypeDef     HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg);
+
+/* QSPI memory-mapped mode */
+HAL_StatusTypeDef     HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg);
+/**
+  * @}
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group3
+  * @{
+  */  
+/* Callback functions in non-blocking modes ***********************************/
+void                  HAL_QSPI_ErrorCallback        (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+void                  HAL_QSPI_CmdCpltCallback      (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_RxCpltCallback       (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_TxCpltCallback       (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_RxHalfCpltCallback   (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_TxHalfCpltCallback   (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI status flag polling mode */
+void                  HAL_QSPI_StatusMatchCallback  (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI memory-mapped mode */
+void                  HAL_QSPI_TimeOutCallback      (QSPI_HandleTypeDef *hqspi);
+/**
+  * @}
+  */
+
+/** @addtogroup QSPI_Exported_Functions_Group4
+  * @{
+  */  
+/* Peripheral Control and State functions  ************************************/
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState(QSPI_HandleTypeDef *hqspi);
+uint32_t              HAL_QSPI_GetError(QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef     HAL_QSPI_Abort   (QSPI_HandleTypeDef *hqspi);
+void                  HAL_QSPI_SetTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Timeout);
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+  
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup QSPI_Private_Constants QSPI Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup QSPI_Private_Macros QSPI Private Macros
+  * @{
+  */
+/** @defgroup QSPI_ClockPrescaler QSPI Clock Prescaler
+  * @{
+  */ 
+#define IS_QSPI_CLOCK_PRESCALER(PRESCALER)  ((PRESCALER) <= 0xFF)
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_FifoThreshold  QSPI Fifo Threshold 
+  * @{
+  */
+#define IS_QSPI_FIFO_THRESHOLD(THR)         (((THR) > 0) && ((THR) <= 32))
+/**
+  * @}
+  */
+  
+#define IS_QSPI_SSHIFT(SSHIFT)              (((SSHIFT) == QSPI_SAMPLE_SHIFTING_NONE) || \
+                                             ((SSHIFT) == QSPI_SAMPLE_SHIFTING_HALFCYCLE)) 
+
+/** @defgroup QSPI_FlashSize QSPI Flash Size
+  * @{
+  */
+#define IS_QSPI_FLASH_SIZE(FSIZE)           (((FSIZE) <= 31))
+/**
+  * @}
+  */
+  
+#define IS_QSPI_CS_HIGH_TIME(CSHTIME)       (((CSHTIME) == QSPI_CS_HIGH_TIME_1_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_2_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_3_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_4_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_5_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_6_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_7_CYCLE) || \
+                                             ((CSHTIME) == QSPI_CS_HIGH_TIME_8_CYCLE))   
+
+#define IS_QSPI_CLOCK_MODE(CLKMODE)         (((CLKMODE) == QSPI_CLOCK_MODE_0) || \
+                                             ((CLKMODE) == QSPI_CLOCK_MODE_3))
+
+#define IS_QSPI_FLASH_ID(FLA)    (((FLA) == QSPI_FLASH_ID_1) || \
+                                  ((FLA) == QSPI_FLASH_ID_2)) 
+                                  
+#define IS_QSPI_DUAL_FLASH_MODE(MODE)    (((MODE) == QSPI_DUALFLASH_ENABLE) || \
+                                          ((MODE) == QSPI_DUALFLASH_DISABLE))
+                                          
+  
+/** @defgroup QSPI_Instruction QSPI Instruction
+  * @{
+  */
+#define IS_QSPI_INSTRUCTION(INSTRUCTION)    ((INSTRUCTION) <= 0xFF) 
+/**
+  * @}
+  */ 
+
+#define IS_QSPI_ADDRESS_SIZE(ADDR_SIZE)     (((ADDR_SIZE) == QSPI_ADDRESS_8_BITS)  || \
+                                             ((ADDR_SIZE) == QSPI_ADDRESS_16_BITS) || \
+                                             ((ADDR_SIZE) == QSPI_ADDRESS_24_BITS) || \
+                                             ((ADDR_SIZE) == QSPI_ADDRESS_32_BITS))
+
+#define IS_QSPI_ALTERNATE_BYTES_SIZE(SIZE)  (((SIZE) == QSPI_ALTERNATE_BYTES_8_BITS)  || \
+                                             ((SIZE) == QSPI_ALTERNATE_BYTES_16_BITS) || \
+                                             ((SIZE) == QSPI_ALTERNATE_BYTES_24_BITS) || \
+                                             ((SIZE) == QSPI_ALTERNATE_BYTES_32_BITS))                                               
+
+
+/** @defgroup QSPI_DummyCycles QSPI Dummy Cycles
+  * @{
+  */
+#define IS_QSPI_DUMMY_CYCLES(DCY)           ((DCY) <= 31) 
+/**
+  * @}
+  */
+
+#define IS_QSPI_INSTRUCTION_MODE(MODE)      (((MODE) == QSPI_INSTRUCTION_NONE)    || \
+                                             ((MODE) == QSPI_INSTRUCTION_1_LINE)  || \
+                                             ((MODE) == QSPI_INSTRUCTION_2_LINES) || \
+                                             ((MODE) == QSPI_INSTRUCTION_4_LINES))  
+
+#define IS_QSPI_ADDRESS_MODE(MODE)          (((MODE) == QSPI_ADDRESS_NONE)    || \
+                                             ((MODE) == QSPI_ADDRESS_1_LINE)  || \
+                                             ((MODE) == QSPI_ADDRESS_2_LINES) || \
+                                             ((MODE) == QSPI_ADDRESS_4_LINES))
+
+#define IS_QSPI_ALTERNATE_BYTES_MODE(MODE)  (((MODE) == QSPI_ALTERNATE_BYTES_NONE)    || \
+                                             ((MODE) == QSPI_ALTERNATE_BYTES_1_LINE)  || \
+                                             ((MODE) == QSPI_ALTERNATE_BYTES_2_LINES) || \
+                                             ((MODE) == QSPI_ALTERNATE_BYTES_4_LINES))
+
+#define IS_QSPI_DATA_MODE(MODE)             (((MODE) == QSPI_DATA_NONE)    || \
+                                             ((MODE) == QSPI_DATA_1_LINE)  || \
+                                             ((MODE) == QSPI_DATA_2_LINES) || \
+                                             ((MODE) == QSPI_DATA_4_LINES))
+
+#define IS_QSPI_DDR_MODE(DDR_MODE)          (((DDR_MODE) == QSPI_DDR_MODE_DISABLE) || \
+                                             ((DDR_MODE) == QSPI_DDR_MODE_ENABLE))
+
+#define IS_QSPI_DDR_HHC(DDR_HHC)            (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY) || \
+                                             ((DDR_HHC) == QSPI_DDR_HHC_HALF_CLK_DELAY))
+
+#define IS_QSPI_SIOO_MODE(SIOO_MODE)      (((SIOO_MODE) == QSPI_SIOO_INST_EVERY_CMD) || \
+                                             ((SIOO_MODE) == QSPI_SIOO_INST_ONLY_FIRST_CMD))
+
+/** @defgroup QSPI_Interval QSPI Interval 
+  * @{
+  */
+#define IS_QSPI_INTERVAL(INTERVAL)        ((INTERVAL) <= QUADSPI_PIR_INTERVAL) 
+/**
+  * @}
+  */
+
+/** @defgroup QSPI_StatusBytesSize QSPI Status Bytes Size
+  * @{
+  */
+#define IS_QSPI_STATUS_BYTES_SIZE(SIZE)   (((SIZE) >= 1) && ((SIZE) <= 4)) 
+/**
+  * @}
+  */
+#define IS_QSPI_MATCH_MODE(MODE)            (((MODE) == QSPI_MATCH_MODE_AND) || \
+                                             ((MODE) == QSPI_MATCH_MODE_OR)) 
+                                             
+#define IS_QSPI_AUTOMATIC_STOP(APMS)        (((APMS) == QSPI_AUTOMATIC_STOP_DISABLE) || \
+                                             ((APMS) == QSPI_AUTOMATIC_STOP_ENABLE))                                                                                                                                                                                                                                    
+
+#define IS_QSPI_TIMEOUT_ACTIVATION(TCEN)    (((TCEN) == QSPI_TIMEOUT_COUNTER_DISABLE) || \
+                                             ((TCEN) == QSPI_TIMEOUT_COUNTER_ENABLE)) 
+
+/** @defgroup QSPI_TimeOutPeriod  QSPI TimeOut Period
+  * @{
+  */
+#define IS_QSPI_TIMEOUT_PERIOD(PERIOD)      ((PERIOD) <= 0xFFFF) 
+/**
+  * @}
+  */
+
+#define IS_QSPI_GET_FLAG(FLAG)              (((FLAG) == QSPI_FLAG_BUSY) || \
+                                             ((FLAG) == QSPI_FLAG_TO)   || \
+                                             ((FLAG) == QSPI_FLAG_SM)   || \
+                                             ((FLAG) == QSPI_FLAG_FT)   || \
+                                             ((FLAG) == QSPI_FLAG_TC)   || \
+                                             ((FLAG) == QSPI_FLAG_TE))    
+
+#define IS_QSPI_IT(IT)                      ((((IT) & (uint32_t)0xFFE0FFFF) == 0x00000000) && ((IT) != 0x00000000))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup QSPI_Private_Functions QSPI Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_QSPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_rcc.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1197 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_rcc.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   RCC HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Reset and Clock Control (RCC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions
+  *       
+  @verbatim                
+  ==============================================================================
+                      ##### RCC specific features #####
+  ==============================================================================
+    [..]  
+      After reset the device is running from Internal High Speed oscillator 
+      (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache 
+      and I-Cache are disabled, and all peripherals are off except internal
+      SRAM, Flash and JTAG.
+      (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
+          all peripherals mapped on these busses are running at HSI speed.
+      (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
+      (+) All GPIOs are in input floating state, except the JTAG pins which
+          are assigned to be used for debug purpose.
+    
+    [..]          
+      Once the device started from reset, the user application has to:        
+      (+) Configure the clock source to be used to drive the System clock
+          (if the application needs higher frequency/performance)
+      (+) Configure the System clock frequency and Flash settings  
+      (+) Configure the AHB and APB busses prescalers
+      (+) Enable the clock for the peripheral(s) to be used
+      (+) Configure the clock source(s) for peripherals which clocks are not
+          derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG)
+
+                      ##### RCC Limitations #####
+  ==============================================================================
+    [..]  
+      A delay between an RCC peripheral clock enable and the effective peripheral 
+      enabling should be taken into account in order to manage the peripheral read/write 
+      from/to registers.
+      (+) This delay depends on the peripheral mapping.
+      (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle 
+          after the clock enable bit is set on the hardware register
+      (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle 
+          after the clock enable bit is set on the hardware register
+
+    [..]  
+      Implemented Workaround:
+      (+) For AHB & APB peripherals, a dummy read to the peripheral register has been
+          inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RCC RCC
+  * @brief RCC HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCC_Private_Macros RCC Private Macros
+  * @{
+  */
+
+#define MCO1_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
+#define MCO1_GPIO_PORT        GPIOA
+#define MCO1_PIN              GPIO_PIN_8
+
+#define MCO2_CLK_ENABLE()   __HAL_RCC_GPIOC_CLK_ENABLE()
+#define MCO2_GPIO_PORT         GPIOC
+#define MCO2_PIN               GPIO_PIN_9
+
+/**
+  * @}
+  */
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Variables RCC Private Variables
+  * @{
+  */
+const uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Functions RCC Exported Functions
+  * @{
+  */
+
+/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions 
+  *  @brief    Initialization and Configuration functions 
+  *
+  @verbatim    
+  ===============================================================================
+##### Initialization and de-initialization functions #####
+  ===============================================================================
+    [..]
+      This section provides functions allowing to configure the internal/external oscillators
+      (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System buses clocks (SYSCLK, AHB, APB1 
+      and APB2).
+
+    [..] Internal/external clock and PLL configuration
+      (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through
+          the PLL as System clock source.
+
+      (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC
+          clock source.
+
+      (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or
+          through the PLL as System clock source. Can be used also as RTC clock source.
+
+      (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.   
+
+      (#) PLL (clocked by HSI or HSE), featuring two different output clocks:
+        (++) The first output is used to generate the high speed system clock (up to 216 MHz)
+        (++) The second output is used to generate the clock for the USB OTG FS (48 MHz),
+             the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz).
+
+      (#) CSS (Clock security system), once enable using the function HAL_RCC_EnableCSS()
+          and if a HSE clock failure occurs(HSE used directly or through PLL as System 
+          clock source), the System clock is automatically switched to HSI and an interrupt
+          is generated if enabled. The interrupt is linked to the Cortex-M7 NMI 
+          (Non-Maskable Interrupt) exception vector.   
+
+      (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
+          clock (through a configurable prescaler) on PA8 pin.
+
+      (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S
+          clock (through a configurable prescaler) on PC9 pin.
+
+    [..] System, AHB and APB busses clocks configuration  
+      (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+          HSE and PLL.
+          The AHB clock (HCLK) is derived from System clock through configurable 
+          prescaler and used to clock the CPU, memory and peripherals mapped 
+          on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived 
+          from AHB clock through configurable prescalers and used to clock 
+          the peripherals mapped on these busses. You can use 
+          "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.  
+
+      -@- All the peripheral clocks are derived from the System clock (SYSCLK) except:
+          (+@) I2S: the I2S clock can be derived either from a specific PLL (PLLI2S) or
+              from an external clock mapped on the I2S_CKIN pin. 
+              You have to use __HAL_RCC_PLLI2S_CONFIG() macro to configure this clock.
+          (+@)  SAI: the SAI clock can be derived either from a specific PLL (PLLI2S) or (PLLSAI) or
+              from an external clock mapped on the I2S_CKIN pin. 
+               You have to use __HAL_RCC_PLLI2S_CONFIG() macro to configure this clock. 
+          (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock
+              divided by 2 to 31. You have to use __HAL_RCC_RTC_CONFIG() and __HAL_RCC_RTC_ENABLE()
+              macros to configure this clock. 
+          (+@) USB OTG FS, SDIO and RTC: USB OTG FS require a frequency equal to 48 MHz
+              to work correctly, while the SDIO require a frequency equal or lower than
+              to 48. This clock is derived of the main PLL through PLLQ divider.
+          (+@) IWDG clock which is always the LSI clock.
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Resets the RCC clock configuration to the default reset state.
+  * @note   The default reset state of the clock configuration is given below:
+  *            - HSI ON and used as system clock source
+  *            - HSE, PLL and PLLI2S OFF
+  *            - AHB, APB1 and APB2 prescaler set to 1.
+  *            - CSS, MCO1 and MCO2 OFF
+  *            - All interrupts disabled
+  * @note   This function doesn't modify the configuration of the
+  *            - Peripheral clocks  
+  *            - LSI, LSE and RTC clocks 
+  * @retval None
+  */
+void HAL_RCC_DeInit(void)
+{
+  /* Set HSION bit */
+  SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4); 
+  
+  /* Reset CFGR register */
+  CLEAR_REG(RCC->CFGR);
+  
+  /* Reset HSEON, CSSON, PLLON, PLLI2S */
+  CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_CSSON | RCC_CR_PLLON| RCC_CR_PLLI2SON); 
+  
+  /* Reset PLLCFGR register */
+  CLEAR_REG(RCC->PLLCFGR);
+  SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2); 
+  
+  /* Reset PLLI2SCFGR register */
+  CLEAR_REG(RCC->PLLI2SCFGR);
+  SET_BIT(RCC->PLLI2SCFGR,  RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1);
+  
+  /* Reset HSEBYP bit */
+  CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+  
+  /* Disable all interrupts */
+  CLEAR_REG(RCC->CIR);
+}
+
+/**
+  * @brief  Initializes the RCC Oscillators according to the specified parameters in the
+  *         RCC_OscInitTypeDef.
+  * @param  RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+  *         contains the configuration information for the RCC Oscillators.
+  * @note   The PLL is not disabled when used as system clock.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+  uint32_t tickstart = 0;  
+ 
+  /* Check the parameters */
+  assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
+  
+  /*------------------------------- HSE Configuration ------------------------*/ 
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+    /* When the HSE is used as system clock or clock source for PLL, It can not be disabled */
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE) 
+       || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
+    {
+	  if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+      {
+        return HAL_ERROR;
+      }
+    }
+    else
+    {
+      /* Reset HSEON and HSEBYP bits before configuring the HSE --------------*/
+      __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF);
+      
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+      
+      /* Wait till HSE is disabled */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+      
+      /* Set the new HSE configuration ---------------------------------------*/
+      __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+      
+      /* Check the HSE State */
+      if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF)
+      {
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+        
+        /* Wait till HSE is ready */  
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+        
+        /* Wait till HSE is bypassed or disabled */
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+        {
+           if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+  }
+  /*----------------------------- HSI Configuration --------------------------*/ 
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+    assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+    
+    /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */ 
+    if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI) 
+       || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
+    {
+      /* When HSI is used as system clock it will not disabled */
+      if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+      {
+        return HAL_ERROR;
+      }
+      /* Otherwise, just the calibration is allowed */
+      else
+      {
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+      }
+    }
+    else
+    {
+      /* Check the HSI State */
+      if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
+      {
+        /* Enable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_ENABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+
+        /* Wait till HSI is ready */  
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+                
+        /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+        __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+      }
+      else
+      {
+        /* Disable the Internal High Speed oscillator (HSI). */
+        __HAL_RCC_HSI_DISABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+      
+        /* Wait till HSI is ready */  
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          } 
+        } 
+      }
+    }
+  }
+  /*------------------------------ LSI Configuration -------------------------*/
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+    /* Check the LSI State */
+    if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
+    {
+      /* Enable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_ENABLE();
+      
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+      
+      /* Wait till LSI is ready */
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+    else
+    {
+      /* Disable the Internal Low Speed oscillator (LSI). */
+      __HAL_RCC_LSI_DISABLE();
+      
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+      
+      /* Wait till LSI is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /*------------------------------ LSE Configuration -------------------------*/ 
+  if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+    
+    /* Enable Power Clock*/
+    __HAL_RCC_PWR_CLK_ENABLE();
+    
+    /* Enable write access to Backup domain */
+    PWR->CR1 |= PWR_CR1_DBP;
+    
+    /* Wait for Backup domain Write protection disable */
+    tickstart = HAL_GetTick();
+    
+    while((PWR->CR1 & PWR_CR1_DBP) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }      
+    }
+    
+    /* Reset LSEON and LSEBYP bits before configuring the LSE ----------------*/
+    __HAL_RCC_LSE_CONFIG(RCC_LSE_OFF);
+    
+    /* Get Start Tick*/
+    tickstart = HAL_GetTick();
+    
+    /* Wait till LSE is ready */  
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }    
+    } 
+    
+    /* Set the new LSE configuration -----------------------------------------*/
+    __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+    /* Check the LSE State */
+    if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
+    {
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+      
+      /* Wait till LSE is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }       
+      }
+    }
+    else
+    {
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+      
+      /* Wait till LSE is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+      {
+        if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+        {
+          return HAL_TIMEOUT;
+        }       
+      }
+    }
+  }
+  /*-------------------------------- PLL Configuration -----------------------*/
+  /* Check the parameters */
+  assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+  if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+  {
+    /* Check if the PLL is used as system clock or not */
+    if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+    { 
+      if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+      {
+        /* Check the parameters */
+        assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+        assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
+        assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
+        assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
+        assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
+        
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+        
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+        
+        /* Wait till PLL is ready */  
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+        
+        /* Configure the main PLL clock source, multiplication and division factors. */
+        __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+                             RCC_OscInitStruct->PLL.PLLM,
+                             RCC_OscInitStruct->PLL.PLLN,
+                             RCC_OscInitStruct->PLL.PLLP,
+                             RCC_OscInitStruct->PLL.PLLQ);
+        /* Enable the main PLL. */
+        __HAL_RCC_PLL_ENABLE();
+
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+        
+        /* Wait till PLL is ready */  
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          } 
+        }
+      }
+      else
+      {
+        /* Disable the main PLL. */
+        __HAL_RCC_PLL_DISABLE();
+ 
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+        
+        /* Wait till PLL is ready */  
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+    else
+    {
+      return HAL_ERROR;
+    }
+  }
+  return HAL_OK;
+}
+ 
+/**
+  * @brief  Initializes the CPU, AHB and APB busses clocks according to the specified 
+  *         parameters in the RCC_ClkInitStruct.
+  * @param  RCC_ClkInitStruct: pointer to an RCC_OscInitTypeDef structure that
+  *         contains the configuration information for the RCC peripheral.
+  * @param  FLatency: FLASH Latency, this parameter depend on device selected
+  * 
+  * @note   The SystemCoreClock CMSIS variable is used to store System Clock Frequency 
+  *         and updated by HAL_RCC_GetHCLKFreq() function called within this function
+  *
+  * @note   The HSI is used (enabled by hardware) as system clock source after
+  *         startup from Reset, wake-up from STOP and STANDBY mode, or in case
+  *         of failure of the HSE used directly or indirectly as system clock
+  *         (if the Clock Security System CSS is enabled).
+  *           
+  * @note   A switch from one clock source to another occurs only if the target
+  *         clock source is ready (clock stable after startup delay or PLL locked). 
+  *         If a clock source which is not yet ready is selected, the switch will
+  *         occur when the clock source will be ready. 
+  *         You can use HAL_RCC_GetClockConfig() function to know which clock is
+  *         currently used as system clock source.
+  * @note   Depending on the device voltage range, the software has to set correctly
+  *         HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency
+  *         (for more details refer to section above "Initialization/de-initialization functions")
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef  *RCC_ClkInitStruct, uint32_t FLatency)
+{
+  uint32_t tickstart = 0;
+ 
+  /* Check the parameters */
+  assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
+  assert_param(IS_FLASH_LATENCY(FLatency));
+ 
+  /* To correctly read data from FLASH memory, the number of wait states (LATENCY) 
+     must be correctly programmed according to the frequency of the CPU clock 
+     (HCLK) and the supply voltage of the device. */
+  
+  /* Increasing the CPU frequency */
+  if(FLatency > (FLASH->ACR & FLASH_ACR_LATENCY))
+  {    
+    /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+    __HAL_FLASH_SET_LATENCY(FLatency);
+    
+    /* Check that the new number of wait states is taken into account to access the Flash
+    memory by reading the FLASH_ACR register */
+    if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+    {
+      return HAL_ERROR;
+    }
+
+    /*-------------------------- HCLK Configuration --------------------------*/
+    if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+    {
+      assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+      MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+    }
+
+    /*------------------------- SYSCLK Configuration ---------------------------*/ 
+    if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+    {    
+      assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+      
+      /* HSE is selected as System Clock Source */
+      if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+      {
+        /* Check the HSE ready flag */  
+        if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+        {
+          return HAL_ERROR;
+        }
+      }
+      /* PLL is selected as System Clock Source */
+      else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+      {
+        /* Check the PLL ready flag */  
+        if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+        {
+          return HAL_ERROR;
+        }
+      }
+      /* HSI is selected as System Clock Source */
+      else
+      {
+        /* Check the HSI ready flag */  
+        if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+        {
+          return HAL_ERROR;
+        }
+      }
+
+      __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+      
+      if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+      {
+        while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+      {
+        while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      else
+      {
+        while(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }    
+  }
+  /* Decreasing the CPU frequency */
+  else
+  {
+    /*-------------------------- HCLK Configuration --------------------------*/
+    if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+    {
+      assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+      MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+    }
+
+    /*------------------------- SYSCLK Configuration -------------------------*/
+    if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+    {    
+      assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+      
+      /* HSE is selected as System Clock Source */
+      if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+      {
+        /* Check the HSE ready flag */  
+        if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+        {
+          return HAL_ERROR;
+        }
+      }
+      /* PLL is selected as System Clock Source */
+      else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+      {
+        /* Check the PLL ready flag */  
+        if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+        {
+          return HAL_ERROR;
+        }
+      }
+      /* HSI is selected as System Clock Source */
+      else
+      {
+        /* Check the HSI ready flag */  
+        if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+        {
+          return HAL_ERROR;
+        }
+      }
+      __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
+      /* Get Start Tick*/
+      tickstart = HAL_GetTick();
+      
+      if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+      {
+        while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          } 
+        }
+      }
+      else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+      {
+        while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          } 
+        }
+      }
+      else
+      {
+        while(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
+        {
+          if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+    }
+    
+    /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+    __HAL_FLASH_SET_LATENCY(FLatency);
+    
+    /* Check that the new number of wait states is taken into account to access the Flash
+    memory by reading the FLASH_ACR register */
+    if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+    {
+      return HAL_ERROR;
+    }
+ }
+
+  /*-------------------------- PCLK1 Configuration ---------------------------*/ 
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+  {
+    assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
+    MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
+  }
+  
+  /*-------------------------- PCLK2 Configuration ---------------------------*/ 
+  if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
+  {
+    assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
+    MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3));
+  }
+
+  /* Configure the source of time base considering new system clocks settings*/
+  HAL_InitTick (TICK_INT_PRIORITY);
+  
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions 
+  *  @brief   RCC clocks control functions 
+  *
+  @verbatim   
+  ===============================================================================
+                  ##### Peripheral Control functions #####
+  ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the RCC Clocks 
+    frequencies.
+      
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9).
+  * @note   PA8/PC9 should be configured in alternate function mode.
+  * @param  RCC_MCOx: specifies the output direction for the clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8).
+  *            @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9).
+  * @param  RCC_MCOSource: specifies the clock source to output.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
+  *            @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
+  *            @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
+  *            @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
+  *            @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+  *            @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source
+  *            @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
+  *            @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
+  * @param  RCC_MCODiv: specifies the MCOx prescaler.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCODIV_1: no division applied to MCOx clock
+  *            @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+  *            @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+  *            @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+  *            @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+  * @retval None
+  */
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
+{
+  GPIO_InitTypeDef GPIO_InitStruct;
+  /* Check the parameters */
+  assert_param(IS_RCC_MCO(RCC_MCOx));
+  assert_param(IS_RCC_MCODIV(RCC_MCODiv));
+  /* RCC_MCO1 */
+  if(RCC_MCOx == RCC_MCO1)
+  {
+    assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
+    
+    /* MCO1 Clock Enable */
+    MCO1_CLK_ENABLE();
+    
+    /* Configure the MCO1 pin in alternate function mode */    
+    GPIO_InitStruct.Pin = MCO1_PIN;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+    HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct);
+    
+    /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */
+    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv));
+  }
+  else
+  {
+    assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource));
+    
+    /* MCO2 Clock Enable */
+    MCO2_CLK_ENABLE();
+    
+    /* Configure the MCO2 pin in alternate function mode */
+    GPIO_InitStruct.Pin = MCO2_PIN;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+    HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct);
+    
+    /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */
+    MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3)));
+  }
+}
+
+/**
+  * @brief  Enables the Clock Security System.
+  * @note   If a failure is detected on the HSE oscillator clock, this oscillator
+  *         is automatically disabled and an interrupt is generated to inform the
+  *         software about the failure (Clock Security System Interrupt, CSSI),
+  *         allowing the MCU to perform rescue operations. The CSSI is linked to 
+  *         the Cortex-M7 NMI (Non-Maskable Interrupt) exception vector.  
+  * @retval None
+  */
+void HAL_RCC_EnableCSS(void)
+{
+  SET_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+  * @brief  Disables the Clock Security System.
+  * @retval None
+  */
+void HAL_RCC_DisableCSS(void)
+{
+  CLEAR_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+  * @brief  Returns the SYSCLK frequency
+  *        
+  * @note   The system frequency computed by this function is not the real 
+  *         frequency in the chip. It is calculated based on the predefined 
+  *         constant and the selected clock source:
+  * @note     If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
+  * @note     If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
+  * @note     If SYSCLK source is PLL, function returns values based on HSE_VALUE(**) 
+  *           or HSI_VALUE(*) multiplied/divided by the PLL factors.         
+  * @note     (*) HSI_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
+  *               16 MHz) but the real value may vary depending on the variations
+  *               in voltage and temperature.
+  * @note     (**) HSE_VALUE is a constant defined in stm32f7xx_hal_conf.h file (default value
+  *                25 MHz), user has to ensure that HSE_VALUE is same as the real
+  *                frequency of the crystal used. Otherwise, this function may
+  *                have wrong result.
+  *                  
+  * @note   The result of this function could be not correct when using fractional
+  *         value for HSE crystal.
+  *           
+  * @note   This function can be used by the user application to compute the 
+  *         baudrate for the communication peripherals or configure other parameters.
+  *           
+  * @note   Each time SYSCLK changes, this function must be called to update the
+  *         right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
+  *         
+  *               
+  * @retval SYSCLK frequency
+  */
+uint32_t HAL_RCC_GetSysClockFreq(void)
+{
+  uint32_t pllm = 0, pllvco = 0, pllp = 0;
+  uint32_t sysclockfreq = 0;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  switch (RCC->CFGR & RCC_CFGR_SWS)
+  {
+    case RCC_SYSCLKSOURCE_STATUS_HSI:  /* HSI used as system clock source */
+    {
+      sysclockfreq = HSI_VALUE;
+       break;
+    }
+    case RCC_SYSCLKSOURCE_STATUS_HSE:  /* HSE used as system clock  source */
+    {
+      sysclockfreq = HSE_VALUE;
+      break;
+    }
+    case RCC_SYSCLKSOURCE_STATUS_PLLCLK:  /* PLL used as system clock  source */
+    {
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
+      SYSCLK = PLL_VCO / PLLP */
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      if (__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLCFGR_PLLSRC_HSI)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));    
+      }
+      pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> POSITION_VAL(RCC_PLLCFGR_PLLP)) + 1 ) *2);
+      
+      sysclockfreq = pllvco/pllp;
+      break;
+    }
+    default:
+    {
+      sysclockfreq = HSI_VALUE;
+      break;
+    }
+  }
+  return sysclockfreq;
+}
+
+/**
+  * @brief  Returns the HCLK frequency     
+  * @note   Each time HCLK changes, this function must be called to update the
+  *         right HCLK value. Otherwise, any configuration based on this function will be incorrect.
+  * 
+  * @note   The SystemCoreClock CMSIS variable is used to store System Clock Frequency 
+  *         and updated within this function
+  * @retval HCLK frequency
+  */
+uint32_t HAL_RCC_GetHCLKFreq(void)
+{
+  SystemCoreClock = HAL_RCC_GetSysClockFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> POSITION_VAL(RCC_CFGR_HPRE)];
+  return SystemCoreClock;
+}
+
+/**
+  * @brief  Returns the PCLK1 frequency     
+  * @note   Each time PCLK1 changes, this function must be called to update the
+  *         right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
+  * @retval PCLK1 frequency
+  */
+uint32_t HAL_RCC_GetPCLK1Freq(void)
+{  
+  /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
+  return (HAL_RCC_GetHCLKFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> POSITION_VAL(RCC_CFGR_PPRE1)]);
+}
+
+/**
+  * @brief  Returns the PCLK2 frequency     
+  * @note   Each time PCLK2 changes, this function must be called to update the
+  *         right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
+  * @retval PCLK2 frequency
+  */
+uint32_t HAL_RCC_GetPCLK2Freq(void)
+{
+  /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
+  return (HAL_RCC_GetHCLKFreq()>> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> POSITION_VAL(RCC_CFGR_PPRE2)]);
+} 
+
+/**
+  * @brief  Configures the RCC_OscInitStruct according to the internal 
+  * RCC configuration registers.
+  * @param  RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that 
+  * will be configured.
+  * @retval None
+  */
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef  *RCC_OscInitStruct)
+{
+  /* Set all possible values for the Oscillator type parameter ---------------*/
+  RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+  
+  /* Get the HSE configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
+  }
+  else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
+  }
+  
+  /* Get the HSI configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
+  {
+    RCC_OscInitStruct->HSIState = RCC_HSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
+  }
+  
+  RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
+  
+  /* Get the LSE configuration -----------------------------------------------*/
+  if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
+  }
+  else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
+  }
+  
+  /* Get the LSI configuration -----------------------------------------------*/
+  if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
+  {
+    RCC_OscInitStruct->LSIState = RCC_LSI_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
+  }
+  
+  /* Get the PLL configuration -----------------------------------------------*/
+  if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
+  {
+    RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
+  }
+  else
+  {
+    RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
+  }
+  RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+  RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
+  RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN));
+  RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1) >> POSITION_VAL(RCC_PLLCFGR_PLLP));
+  RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> POSITION_VAL(RCC_PLLCFGR_PLLQ));
+}
+
+/**
+  * @brief  Configures the RCC_ClkInitStruct according to the internal 
+  * RCC configuration registers.
+  * @param  RCC_ClkInitStruct: pointer to an RCC_ClkInitTypeDef structure that 
+  * will be configured.
+  * @param  pFLatency: Pointer on the Flash Latency.
+  * @retval None
+  */
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef  *RCC_ClkInitStruct, uint32_t *pFLatency)
+{
+  /* Set all possible values for the Clock type parameter --------------------*/
+  RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+   
+  /* Get the SYSCLK configuration --------------------------------------------*/ 
+  RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
+  
+  /* Get the HCLK configuration ----------------------------------------------*/ 
+  RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE); 
+  
+  /* Get the APB1 configuration ----------------------------------------------*/ 
+  RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1);   
+  
+  /* Get the APB2 configuration ----------------------------------------------*/ 
+  RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3);
+  
+  /* Get the Flash Wait State (Latency) configuration ------------------------*/   
+  *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY); 
+}
+
+/**
+  * @brief This function handles the RCC CSS interrupt request.
+  * @note This API should be called under the NMI_Handler().
+  * @retval None
+  */
+void HAL_RCC_NMI_IRQHandler(void)
+{
+  /* Check RCC CSSF flag  */
+  if(__HAL_RCC_GET_IT(RCC_IT_CSS))
+  {
+    /* RCC Clock Security System interrupt user callback */
+    HAL_RCC_CSSCallback();
+
+    /* Clear RCC CSS pending bit */
+    __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
+  }
+}
+
+/**
+  * @brief  RCC Clock Security System interrupt callback
+  * @retval None
+  */
+__weak void HAL_RCC_CSSCallback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RCC_CSSCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_rcc.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1349 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_rcc.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of RCC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_RCC_H
+#define __STM32F7xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RCC
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** @defgroup RCC_Exported_Types RCC Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  RCC PLL configuration structure definition  
+  */
+typedef struct
+{
+  uint32_t PLLState;   /*!< The new state of the PLL.
+                            This parameter can be a value of @ref RCC_PLL_Config                      */
+
+  uint32_t PLLSource;  /*!< RCC_PLLSource: PLL entry clock source.
+                            This parameter must be a value of @ref RCC_PLL_Clock_Source               */           
+
+  uint32_t PLLM;       /*!< PLLM: Division factor for PLL VCO input clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 63    */        
+
+  uint32_t PLLN;       /*!< PLLN: Multiplication factor for PLL VCO output clock.
+                            This parameter must be a number between Min_Data = 100 and Max_Data = 432 */
+
+  uint32_t PLLP;       /*!< PLLP: Division factor for main system clock (SYSCLK).
+                            This parameter must be a value of @ref RCC_PLLP_Clock_Divider             */
+
+  uint32_t PLLQ;       /*!< PLLQ: Division factor for OTG FS, SDMMC and RNG clocks.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 15    */
+
+}RCC_PLLInitTypeDef;
+
+/**
+  * @brief  RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition  
+  */
+typedef struct
+{
+  uint32_t OscillatorType;       /*!< The oscillators to be configured.
+                                      This parameter can be a value of @ref RCC_Oscillator_Type                   */
+
+  uint32_t HSEState;             /*!< The new state of the HSE.
+                                      This parameter can be a value of @ref RCC_HSE_Config                        */
+
+  uint32_t LSEState;             /*!< The new state of the LSE.
+                                      This parameter can be a value of @ref RCC_LSE_Config                        */
+                                          
+  uint32_t HSIState;             /*!< The new state of the HSI.
+                                      This parameter can be a value of @ref RCC_HSI_Config                        */
+
+  uint32_t HSICalibrationValue;   /*!< The calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+                                       This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+                               
+  uint32_t LSIState;             /*!< The new state of the LSI.
+                                      This parameter can be a value of @ref RCC_LSI_Config                        */
+
+  RCC_PLLInitTypeDef PLL;        /*!< PLL structure parameters                                                    */      
+
+}RCC_OscInitTypeDef;
+
+/**
+  * @brief  RCC System, AHB and APB busses clock configuration structure definition  
+  */
+typedef struct
+{
+  uint32_t ClockType;             /*!< The clock to be configured.
+                                       This parameter can be a value of @ref RCC_System_Clock_Type */
+  
+  uint32_t SYSCLKSource;          /*!< The clock source (SYSCLKS) used as system clock.
+                                       This parameter can be a value of @ref RCC_System_Clock_Source    */
+
+  uint32_t AHBCLKDivider;         /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+                                       This parameter can be a value of @ref RCC_AHB_Clock_Source       */
+
+  uint32_t APB1CLKDivider;        /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+                                       This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+  uint32_t APB2CLKDivider;        /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+                                       This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+  * @{
+  */
+
+/** @defgroup RCC_Oscillator_Type Oscillator Type
+  * @{
+  */
+#define RCC_OSCILLATORTYPE_NONE            ((uint32_t)0x00000000)
+#define RCC_OSCILLATORTYPE_HSE             ((uint32_t)0x00000001)
+#define RCC_OSCILLATORTYPE_HSI             ((uint32_t)0x00000002)
+#define RCC_OSCILLATORTYPE_LSE             ((uint32_t)0x00000004)
+#define RCC_OSCILLATORTYPE_LSI             ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_HSE_Config RCC HSE Config
+  * @{
+  */
+#define RCC_HSE_OFF                      ((uint32_t)0x00000000)
+#define RCC_HSE_ON                       RCC_CR_HSEON
+#define RCC_HSE_BYPASS                   ((uint32_t)(RCC_CR_HSEBYP | RCC_CR_HSEON))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_LSE_Config RCC LSE Config
+  * @{
+  */
+#define RCC_LSE_OFF                    ((uint32_t)0x00000000)
+#define RCC_LSE_ON                     RCC_BDCR_LSEON
+#define RCC_LSE_BYPASS                 ((uint32_t)(RCC_BDCR_LSEBYP | RCC_BDCR_LSEON))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_HSI_Config RCC HSI Config
+  * @{
+  */
+#define RCC_HSI_OFF                    ((uint32_t)0x00000000)
+#define RCC_HSI_ON                     RCC_CR_HSION
+/**
+  * @}
+  */
+
+/** @defgroup RCC_LSI_Config RCC LSI Config
+  * @{
+  */
+#define RCC_LSI_OFF                    ((uint32_t)0x00000000)
+#define RCC_LSI_ON                     RCC_CSR_LSION
+/**
+  * @}
+  */
+
+/** @defgroup RCC_PLL_Config RCC PLL Config
+  * @{
+  */
+#define RCC_PLL_NONE                   ((uint32_t)0x00000000)
+#define RCC_PLL_OFF                    ((uint32_t)0x00000001)
+#define RCC_PLL_ON                     ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider
+  * @{
+  */
+#define RCC_PLLP_DIV2                  ((uint32_t)0x00000002)
+#define RCC_PLLP_DIV4                  ((uint32_t)0x00000004)
+#define RCC_PLLP_DIV6                  ((uint32_t)0x00000006)
+#define RCC_PLLP_DIV8                  ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
+  * @{
+  */
+#define RCC_PLLSOURCE_HSI                RCC_PLLCFGR_PLLSRC_HSI
+#define RCC_PLLSOURCE_HSE                RCC_PLLCFGR_PLLSRC_HSE
+/**
+  * @}
+  */
+
+/** @defgroup RCC_System_Clock_Type RCC System Clock Type
+  * @{
+  */
+#define RCC_CLOCKTYPE_SYSCLK             ((uint32_t)0x00000001)
+#define RCC_CLOCKTYPE_HCLK               ((uint32_t)0x00000002)
+#define RCC_CLOCKTYPE_PCLK1              ((uint32_t)0x00000004)
+#define RCC_CLOCKTYPE_PCLK2              ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+  
+/** @defgroup RCC_System_Clock_Source RCC System Clock Source
+  * @{
+  */
+#define RCC_SYSCLKSOURCE_HSI             RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE             RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK          RCC_CFGR_SW_PLL
+/**
+  * @}
+  */
+
+
+/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
+  * @{
+  */
+#define RCC_SYSCLKSOURCE_STATUS_HSI      RCC_CFGR_SWS_HSI   /*!< HSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSE      RCC_CFGR_SWS_HSE   /*!< HSE used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK   RCC_CFGR_SWS_PLL   /*!< PLL used as system clock */
+/**
+  * @}
+  */
+
+/** @defgroup RCC_AHB_Clock_Source RCC AHB Clock Source
+  * @{
+  */
+#define RCC_SYSCLK_DIV1                  RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2                  RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4                  RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8                  RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16                 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64                 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128                RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256                RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512                RCC_CFGR_HPRE_DIV512
+/**
+  * @}
+  */ 
+  
+/** @defgroup RCC_APB1_APB2_Clock_Source RCC APB1/APB2 Clock Source
+  * @{
+  */
+#define RCC_HCLK_DIV1                    RCC_CFGR_PPRE1_DIV1
+#define RCC_HCLK_DIV2                    RCC_CFGR_PPRE1_DIV2
+#define RCC_HCLK_DIV4                    RCC_CFGR_PPRE1_DIV4
+#define RCC_HCLK_DIV8                    RCC_CFGR_PPRE1_DIV8
+#define RCC_HCLK_DIV16                   RCC_CFGR_PPRE1_DIV16
+/**
+  * @}
+  */ 
+
+/** @defgroup RCC_RTC_Clock_Source RCC RTC Clock Source
+  * @{
+  */
+#define RCC_RTCCLKSOURCE_LSE             ((uint32_t)0x00000100)
+#define RCC_RTCCLKSOURCE_LSI             ((uint32_t)0x00000200)
+#define RCC_RTCCLKSOURCE_HSE_DIV2        ((uint32_t)0x00020300)
+#define RCC_RTCCLKSOURCE_HSE_DIV3        ((uint32_t)0x00030300)
+#define RCC_RTCCLKSOURCE_HSE_DIV4        ((uint32_t)0x00040300)
+#define RCC_RTCCLKSOURCE_HSE_DIV5        ((uint32_t)0x00050300)
+#define RCC_RTCCLKSOURCE_HSE_DIV6        ((uint32_t)0x00060300)
+#define RCC_RTCCLKSOURCE_HSE_DIV7        ((uint32_t)0x00070300)
+#define RCC_RTCCLKSOURCE_HSE_DIV8        ((uint32_t)0x00080300)
+#define RCC_RTCCLKSOURCE_HSE_DIV9        ((uint32_t)0x00090300)
+#define RCC_RTCCLKSOURCE_HSE_DIV10       ((uint32_t)0x000A0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV11       ((uint32_t)0x000B0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV12       ((uint32_t)0x000C0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV13       ((uint32_t)0x000D0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV14       ((uint32_t)0x000E0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV15       ((uint32_t)0x000F0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV16       ((uint32_t)0x00100300)
+#define RCC_RTCCLKSOURCE_HSE_DIV17       ((uint32_t)0x00110300)
+#define RCC_RTCCLKSOURCE_HSE_DIV18       ((uint32_t)0x00120300)
+#define RCC_RTCCLKSOURCE_HSE_DIV19       ((uint32_t)0x00130300)
+#define RCC_RTCCLKSOURCE_HSE_DIV20       ((uint32_t)0x00140300)
+#define RCC_RTCCLKSOURCE_HSE_DIV21       ((uint32_t)0x00150300)
+#define RCC_RTCCLKSOURCE_HSE_DIV22       ((uint32_t)0x00160300)
+#define RCC_RTCCLKSOURCE_HSE_DIV23       ((uint32_t)0x00170300)
+#define RCC_RTCCLKSOURCE_HSE_DIV24       ((uint32_t)0x00180300)
+#define RCC_RTCCLKSOURCE_HSE_DIV25       ((uint32_t)0x00190300)
+#define RCC_RTCCLKSOURCE_HSE_DIV26       ((uint32_t)0x001A0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV27       ((uint32_t)0x001B0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV28       ((uint32_t)0x001C0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV29       ((uint32_t)0x001D0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV30       ((uint32_t)0x001E0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV31       ((uint32_t)0x001F0300)
+/**
+  * @}
+  */
+
+
+
+/** @defgroup RCC_MCO_Index RCC MCO Index
+  * @{
+  */
+#define RCC_MCO1                         ((uint32_t)0x00000000)
+#define RCC_MCO2                         ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_MCO1_Clock_Source RCC MCO1 Clock Source
+  * @{
+  */
+#define RCC_MCO1SOURCE_HSI               ((uint32_t)0x00000000)
+#define RCC_MCO1SOURCE_LSE               RCC_CFGR_MCO1_0
+#define RCC_MCO1SOURCE_HSE               RCC_CFGR_MCO1_1
+#define RCC_MCO1SOURCE_PLLCLK            RCC_CFGR_MCO1
+/**
+  * @}
+  */
+
+/** @defgroup RCC_MCO2_Clock_Source RCC MCO2 Clock Source
+  * @{
+  */
+#define RCC_MCO2SOURCE_SYSCLK            ((uint32_t)0x00000000)
+#define RCC_MCO2SOURCE_PLLI2SCLK         RCC_CFGR_MCO2_0
+#define RCC_MCO2SOURCE_HSE               RCC_CFGR_MCO2_1
+#define RCC_MCO2SOURCE_PLLCLK            RCC_CFGR_MCO2
+/**
+  * @}
+  */
+
+/** @defgroup RCC_MCOx_Clock_Prescaler RCC MCO1 Clock Prescaler
+  * @{
+  */
+#define RCC_MCODIV_1                    ((uint32_t)0x00000000)
+#define RCC_MCODIV_2                    RCC_CFGR_MCO1PRE_2
+#define RCC_MCODIV_3                    ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_4                    ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_5                    RCC_CFGR_MCO1PRE
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Interrupt RCC Interrupt 
+  * @{
+  */
+#define RCC_IT_LSIRDY                    ((uint8_t)0x01)
+#define RCC_IT_LSERDY                    ((uint8_t)0x02)
+#define RCC_IT_HSIRDY                    ((uint8_t)0x04)
+#define RCC_IT_HSERDY                    ((uint8_t)0x08)
+#define RCC_IT_PLLRDY                    ((uint8_t)0x10)
+#define RCC_IT_PLLI2SRDY                 ((uint8_t)0x20)
+#define RCC_IT_PLLSAIRDY                 ((uint8_t)0x40)
+#define RCC_IT_CSS                       ((uint8_t)0x80)
+/**
+  * @}
+  */
+  
+/** @defgroup RCC_Flag RCC Flags
+  *        Elements values convention: 0XXYYYYYb
+  *           - YYYYY  : Flag position in the register
+  *           - 0XX  : Register index
+  *                 - 01: CR register
+  *                 - 10: BDCR register
+  *                 - 11: CSR register
+  * @{
+  */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY                  ((uint8_t)0x21)
+#define RCC_FLAG_HSERDY                  ((uint8_t)0x31)
+#define RCC_FLAG_PLLRDY                  ((uint8_t)0x39)
+#define RCC_FLAG_PLLI2SRDY               ((uint8_t)0x3B)
+#define RCC_FLAG_PLLSAIRDY               ((uint8_t)0x3C)
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY                  ((uint8_t)0x41)
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY                  ((uint8_t)0x61)
+#define RCC_FLAG_BORRST                  ((uint8_t)0x79)
+#define RCC_FLAG_PINRST                  ((uint8_t)0x7A)
+#define RCC_FLAG_PORRST                  ((uint8_t)0x7B)
+#define RCC_FLAG_SFTRST                  ((uint8_t)0x7C)
+#define RCC_FLAG_IWDGRST                 ((uint8_t)0x7D)
+#define RCC_FLAG_WWDGRST                 ((uint8_t)0x7E)
+#define RCC_FLAG_LPWRRST                 ((uint8_t)0x7F)
+/**
+  * @}
+  */ 
+
+/** @defgroup RCC_LSEDrive_Configuration RCC LSE Drive configurations
+  * @{
+  */
+#define RCC_LSEDRIVE_LOW                 ((uint32_t)0x00000000)
+#define RCC_LSEDRIVE_MEDIUMLOW           RCC_BDCR_LSEDRV_1
+#define RCC_LSEDRIVE_MEDIUMHIGH          RCC_BDCR_LSEDRV_0
+#define RCC_LSEDRIVE_HIGH                RCC_BDCR_LSEDRV
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+   
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+  * @{
+  */
+
+/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+  * @brief  Enable or disable the AHB1 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before 
+  *         using it.   
+  * @{
+  */
+#define __HAL_RCC_CRC_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+									  
+#define __HAL_RCC_DMA1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_CRC_CLK_DISABLE()          (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#define __HAL_RCC_DMA1_CLK_DISABLE()         (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN))
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+  * @brief  Enable or disable the Low Speed APB (APB1) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+#define __HAL_RCC_WWDG_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+									  
+#define __HAL_RCC_PWR_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)									  
+
+#define __HAL_RCC_WWDG_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_PWR_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) 
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable                                      
+  * @brief  Enable or disable the High Speed APB (APB2) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before 
+  *         using it.
+  * @{
+  */
+#define __HAL_RCC_SYSCFG_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+									  
+#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+
+/**
+  * @}
+  */
+  
+/** @defgroup RCC_AHB1_Peripheral_Clock_Enable_Disable_Status AHB1 Peripheral Clock Enable Disable Status
+  * @brief  Get the enable or disable status of the AHB1 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+#define __HAL_RCC_CRC_IS_CLK_ENABLED()         ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) != RESET)  
+#define __HAL_RCC_DMA1_IS_CLK_ENABLED()        ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA1EN)) != RESET)
+
+#define __HAL_RCC_CRC_IS_CLK_DISABLED()        ((RCC->AHB1ENR & (RCC_AHB1ENR_CRCEN)) == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_DISABLED()       ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA1EN)) == RESET)
+/**
+  * @}
+  */
+  
+/** @defgroup RCC_APB1_Clock_Enable_Disable_Status APB1 Peripheral Clock Enable Disable  Status
+  * @brief  Get the enable or disable status of the APB1 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+#define __HAL_RCC_WWDG_IS_CLK_ENABLED()        ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_ENABLED()         ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) != RESET)
+
+#define __HAL_RCC_WWDG_IS_CLK_DISABLED()       ((RCC->APB1ENR & (RCC_APB1ENR_WWDGEN)) == RESET)
+#define __HAL_RCC_PWR_IS_CLK_DISABLED()        ((RCC->APB1ENR & (RCC_APB1ENR_PWREN)) == RESET)
+/**
+  * @}
+  */  
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable_Status APB2 Peripheral Clock Enable Disable Status
+  * @brief  EGet the enable or disable status of the APB2 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+#define __HAL_RCC_SYSCFG_IS_CLK_ENABLED()      ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) != RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_DISABLED()     ((RCC->APB2ENR & (RCC_APB2ENR_SYSCFGEN)) == RESET)
+/**
+  * @}
+  */  
+  
+/** @defgroup RCC_Peripheral_Clock_Force_Release RCC Peripheral Clock Force Release
+  * @brief  Force or release AHB peripheral reset.
+  * @{
+  */  
+#define __HAL_RCC_AHB1_FORCE_RESET()    (RCC->AHB1RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_CRC_FORCE_RESET()     (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_DMA1_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
+
+#define __HAL_RCC_AHB1_RELEASE_RESET()  (RCC->AHB1RSTR = 0x00)
+#define __HAL_RCC_CRC_RELEASE_RESET()   (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_DMA1_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset 
+  * @brief  Force or release APB1 peripheral reset.
+  * @{
+  */
+#define __HAL_RCC_APB1_FORCE_RESET()     (RCC->APB1RSTR = 0xFFFFFFFF)  
+#define __HAL_RCC_WWDG_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_PWR_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET()   (RCC->APB1RSTR = 0x00) 
+#define __HAL_RCC_WWDG_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_PWR_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset 
+  * @brief  Force or release APB2 peripheral reset.
+  * @{
+  */
+#define __HAL_RCC_APB2_FORCE_RESET()     (RCC->APB2RSTR = 0xFFFFFFFF)  
+#define __HAL_RCC_SYSCFG_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET()   (RCC->APB2RSTR = 0x00)
+#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Peripheral_Clock_Sleep_Enable_Disable RCC Peripheral Clock Sleep Enable Disable
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  * @{
+  */
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE()     (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN))
+
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE()    (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN))
+
+/** @brief  Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE()     (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN))
+
+#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE()    (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN))
+
+/** @brief  Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE()  (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN))
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN))
+
+/**
+  * @}
+  */
+  
+/** @defgroup RCC_AHB1_Clock_Sleep_Enable_Disable_Status AHB1 Peripheral Clock Sleep Enable Disable Status
+  * @brief  Get the enable or disable status of the AHB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  * @{
+  */
+#define __HAL_RCC_CRC_IS_CLK_SLEEP_ENABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_CRCLPEN)) != RESET)
+#define __HAL_RCC_DMA1_IS_CLK_SLEEP_ENABLED()    ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA1LPEN)) != RESET)
+
+#define __HAL_RCC_CRC_IS_CLK_SLEEP_DISABLED()    ((RCC->AHB1LPENR & (RCC_AHB1LPENR_CRCLPEN)) == RESET)
+#define __HAL_RCC_DMA1_IS_CLK_SLEEP_DISABLED()   ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA1LPEN)) == RESET)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB1_Clock_Sleep_Enable_Disable_Status APB1 Peripheral Clock Sleep Enable Disable Status
+  * @brief  Get the enable or disable status of the APB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  * @{
+  */
+#define __HAL_RCC_WWDG_IS_CLK_SLEEP_ENABLED()      ((RCC->APB1LPENR & (RCC_APB1LPENR_WWDGLPEN)) != RESET)
+#define __HAL_RCC_PWR_IS_CLK_SLEEP_ENABLED()       ((RCC->APB1LPENR & (RCC_APB1LPENR_PWRLPEN)) != RESET)
+
+#define __HAL_RCC_WWDG_IS_CLK_SLEEP_DISABLED()     ((RCC->APB1LPENR & (RCC_APB1LPENR_WWDGLPEN)) == RESET)
+#define __HAL_RCC_PWR_IS_CLK_SLEEP_DISABLED()      ((RCC->APB1LPENR & (RCC_APB1LPENR_PWRLPEN)) == RESET)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_APB2_Clock_Sleep_Enable_Disable_Status APB2 Peripheral Clock Sleep Enable Disable Status
+  * @brief  Get the enable or disable status of the APB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  * @{
+  */
+#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_SYSCFGLPEN)) != RESET)
+#define __HAL_RCC_SYSCFG_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_SYSCFGLPEN)) == RESET)
+/**
+  * @}
+  */  
+
+/** @defgroup RCC_HSI_Configuration HSI Configuration
+  * @{   
+  */ 
+                                      
+/** @brief  Macros to enable or disable the Internal High Speed oscillator (HSI).
+  * @note   The HSI is stopped by hardware when entering STOP and STANDBY modes.
+  *         It is used (enabled by hardware) as system clock source after startup
+  *         from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+  *         of the HSE used directly or indirectly as system clock (if the Clock
+  *         Security System CSS is enabled).             
+  * @note   HSI can not be stopped if it is used as system clock source. In this case,
+  *         you have to select another source of the system clock then stop the HSI.  
+  * @note   After enabling the HSI, the application software should wait on HSIRDY
+  *         flag to be set indicating that HSI clock is stable and can be used as
+  *         system clock source.  
+  * @note   When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+  *         clock cycles.  
+  */
+#define __HAL_RCC_HSI_ENABLE() (RCC->CR |= (RCC_CR_HSION))
+#define __HAL_RCC_HSI_DISABLE() (RCC->CR &= ~(RCC_CR_HSION))
+
+/** @brief  Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+  * @note   The calibration is used to compensate for the variations in voltage
+  *         and temperature that influence the frequency of the internal HSI RC.
+  * @param  __HSICALIBRATIONVALUE__: specifies the calibration trimming value.
+  *         This parameter must be a number between 0 and 0x1F.
+  */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICALIBRATIONVALUE__) (MODIFY_REG(RCC->CR,\
+        RCC_CR_HSITRIM, (uint32_t)(__HSICALIBRATIONVALUE__) << POSITION_VAL(RCC_CR_HSITRIM)))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_LSI_Configuration LSI Configuration
+  * @{   
+  */ 
+
+/** @brief  Macros to enable or disable the Internal Low Speed oscillator (LSI).
+  * @note   After enabling the LSI, the application software should wait on 
+  *         LSIRDY flag to be set indicating that LSI clock is stable and can
+  *         be used to clock the IWDG and/or the RTC.
+  * @note   LSI can not be disabled if the IWDG is running.
+  * @note   When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+  *         clock cycles. 
+  */
+#define __HAL_RCC_LSI_ENABLE()  (RCC->CSR |= (RCC_CSR_LSION))
+#define __HAL_RCC_LSI_DISABLE() (RCC->CSR &= ~(RCC_CSR_LSION))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_HSE_Configuration HSE Configuration
+  * @{   
+  */ 
+/**
+  * @brief  Macro to configure the External High Speed oscillator (__HSE__).
+  * @note   After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+  *         software should wait on HSERDY flag to be set indicating that HSE clock
+  *         is stable and can be used to clock the PLL and/or system clock.
+  * @note   HSE state can not be changed if it is used directly or through the
+  *         PLL as system clock. In this case, you have to select another source
+  *         of the system clock then change the HSE state (ex. disable it).
+  * @note   The HSE is stopped by hardware when entering STOP and STANDBY modes.  
+  * @note   This function reset the CSSON bit, so if the clock security system(CSS)
+  *         was previously enabled you have to enable it again after calling this
+  *         function.    
+  * @param  __STATE__: specifies the new state of the HSE.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+  *                              6 HSE oscillator clock cycles.
+  *            @arg RCC_HSE_ON: turn ON the HSE oscillator.
+  *            @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
+  */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) \
+                    do {                                     \
+                      CLEAR_BIT(RCC->CR, RCC_CR_HSEON);      \
+                      if((__STATE__) == RCC_HSE_ON)          \
+                      {                                      \
+                        CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);   \
+                        SET_BIT(RCC->CR, RCC_CR_HSEON);      \
+                      }                                      \
+                      else if((__STATE__) == RCC_HSE_BYPASS) \
+                      {                                      \
+                        SET_BIT(RCC->CR, RCC_CR_HSEBYP);     \
+                        SET_BIT(RCC->CR, RCC_CR_HSEON);      \
+                      }                                      \
+                      else                                   \
+                      {                                      \
+                        CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);   \
+                        CLEAR_BIT(RCC->CR, RCC_CR_HSEON);    \
+                        }                                    \
+                    } while(0)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_LSE_Configuration LSE Configuration
+  * @{   
+  */
+
+/**
+  * @brief  Macro to configure the External Low Speed oscillator (LSE).
+  * @note   Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. 
+  *         User should request a transition to LSE Off first and then LSE On or LSE Bypass.  
+  * @note   As the LSE is in the Backup domain and write access is denied to
+  *         this domain after reset, you have to enable write access using 
+  *         HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+  *         (to be done once after reset).  
+  * @note   After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+  *         software should wait on LSERDY flag to be set indicating that LSE clock
+  *         is stable and can be used to clock the RTC.
+  * @param  __STATE__: specifies the new state of the LSE.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+  *                              6 LSE oscillator clock cycles.
+  *            @arg RCC_LSE_ON: turn ON the LSE oscillator.
+  *            @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
+  */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) \
+                    do {                                       \
+                      CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);    \
+                      if((__STATE__) == RCC_LSE_ON)            \
+                      {                                        \
+                        CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+                        SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);    \
+                      }                                        \
+                      else if((__STATE__) == RCC_LSE_BYPASS)   \
+                      {                                        \
+                        SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);   \
+                        SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);    \
+                      }                                        \
+                      else                                     \
+                      {                                        \
+                        CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP); \
+                        CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);  \
+                      }                                        \
+                    } while(0)
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration
+  * @{   
+  */
+
+/** @brief  Macros to enable or disable the RTC clock.
+  * @note   These macros must be used only after the RTC clock source was selected.
+  */
+#define __HAL_RCC_RTC_ENABLE()  (RCC->BDCR |= (RCC_BDCR_RTCEN))
+#define __HAL_RCC_RTC_DISABLE() (RCC->BDCR &= ~(RCC_BDCR_RTCEN))
+
+/** @brief  Macros to configure the RTC clock (RTCCLK).
+  * @note   As the RTC clock configuration bits are in the Backup domain and write
+  *         access is denied to this domain after reset, you have to enable write
+  *         access using the Power Backup Access macro before to configure
+  *         the RTC clock source (to be done once after reset).    
+  * @note   Once the RTC clock is configured it can't be changed unless the  
+  *         Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+  *         a Power On Reset (POR).
+  * @param  __RTCCLKSource__: specifies the RTC clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
+  *            @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
+  *            @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected
+  *                                            as RTC clock, where x:[2,31]
+  * @note   If the LSE or LSI is used as RTC clock source, the RTC continues to
+  *         work in STOP and STANDBY modes, and can be used as wakeup source.
+  *         However, when the HSE clock is used as RTC clock source, the RTC
+  *         cannot be used in STOP and STANDBY modes.    
+  * @note   The maximum input clock frequency for RTC is 1MHz (when using HSE as
+  *         RTC clock source).
+  */
+#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ?    \
+                                                 MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
+                                                   
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__);    \
+                                                    RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF);  \
+                                                   } while (0)
+
+/** @brief  Macros to force or release the Backup domain reset.
+  * @note   This function resets the RTC peripheral (including the backup registers)
+  *         and the RTC clock source selection in RCC_CSR register.
+  * @note   The BKPSRAM is not affected by this reset.   
+  */
+#define __HAL_RCC_BACKUPRESET_FORCE()   (RCC->BDCR |= (RCC_BDCR_BDRST))
+#define __HAL_RCC_BACKUPRESET_RELEASE() (RCC->BDCR &= ~(RCC_BDCR_BDRST))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_PLL_Configuration PLL Configuration
+  * @{   
+  */
+
+/** @brief  Macros to enable or disable the main PLL.
+  * @note   After enabling the main PLL, the application software should wait on 
+  *         PLLRDY flag to be set indicating that PLL clock is stable and can
+  *         be used as system clock source.
+  * @note   The main PLL can not be disabled if it is used as system clock source
+  * @note   The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+  */
+#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON)
+#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON)
+
+
+/** @brief  Macro to configure the main PLL clock source, multiplication and division factors.
+  * @note   This function must be used only when the main PLL is disabled.
+  * @param  __RCC_PLLSource__: specifies the PLL entry clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+  *            @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+  * @note   This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.  
+  * @param  __PLLM__: specifies the division factor for PLL VCO input clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+  * @note   You have to set the PLLM parameter correctly to ensure that the VCO input
+  *         frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+  *         of 2 MHz to limit PLL jitter.
+  * @param  __PLLN__: specifies the multiplication factor for PLL VCO output clock
+  *         This parameter must be a number between Min_Data = 100 and Max_Data = 432.
+  * @note   You have to set the PLLN parameter correctly to ensure that the VCO
+  *         output frequency is between 100 and 432 MHz.
+  * @param  __PLLP__: specifies the division factor for main system clock (SYSCLK)
+  *         This parameter must be a number in the range {2, 4, 6, or 8}.
+  * @note   You have to set the PLLP parameter correctly to not exceed 216 MHz on
+  *         the System clock frequency.
+  * @param  __PLLQ__: specifies the division factor for OTG FS, SDMMC and RNG clocks
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+  * @note   If the USB OTG FS is used in your application, you have to set the
+  *         PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+  *         the SDMMC and RNG need a frequency lower than or equal to 48 MHz to work
+  *         correctly.
+  */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__)\
+                            (RCC->PLLCFGR = (0x20000000 | (__PLLM__) | ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
+                            ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | (__RCC_PLLSource__) | \
+                            ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ))))
+                            
+/** @brief  Macro to configure the PLL clock source.
+  * @note   This function must be used only when the main PLL is disabled.
+  * @param  __PLLSOURCE__: specifies the PLL entry clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+  *            @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+  *      
+  */
+#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__))
+
+/** @brief  Macro to configure the PLL multiplication factor.
+  * @note   This function must be used only when the main PLL is disabled.
+  * @param  __PLLM__: specifies the division factor for PLL VCO input clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+  * @note   You have to set the PLLM parameter correctly to ensure that the VCO input
+  *         frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+  *         of 2 MHz to limit PLL jitter.
+  *      
+  */
+#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_PLL_I2S_Configuration PLL I2S Configuration
+  * @{   
+  */
+
+/** @brief  Macro to configure the I2S clock source (I2SCLK).
+  * @note   This function must be called before enabling the I2S APB clock.
+  * @param  __SOURCE__: specifies the I2S clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source.
+  *            @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+  *                                       used as I2S clock source.
+  */
+#define __HAL_RCC_I2S_CONFIG(__SOURCE__) do {RCC->CFGR &= ~(RCC_CFGR_I2SSRC); \
+                                             RCC->CFGR |= (__SOURCE__);       \
+                                            }while(0)
+
+/** @brief Macros to enable or disable the PLLI2S. 
+  * @note  The PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
+  */
+#define __HAL_RCC_PLLI2S_ENABLE() (RCC->CR |= (RCC_CR_PLLI2SON))
+#define __HAL_RCC_PLLI2S_DISABLE() (RCC->CR &= ~(RCC_CR_PLLI2SON))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Get_Clock_source Get Clock source
+  * @{   
+  */
+/**
+  * @brief Macro to configure the system clock source.
+  * @param __RCC_SYSCLKSOURCE__: specifies the system clock source.
+  * This parameter can be one of the following values:
+  *              - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source.
+  *              - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source.
+  *              - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source.
+  */
+#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__))
+
+/** @brief  Macro to get the clock source used as system clock.
+  * @retval The clock source used as system clock. The returned value can be one
+  *         of the following:
+  *              - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock.
+  *              - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock.
+  *              - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock.
+  */     
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
+
+/**
+  * @brief  Macro to configures the External Low Speed oscillator (LSE) drive capability.
+  * @note   As the LSE is in the Backup domain and write access is denied to
+  *         this domain after reset, you have to enable write access using
+  *         HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+  *         (to be done once after reset).
+  * @param  __RCC_LSEDRIVE__: specifies the new state of the LSE drive capability.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_LSEDRIVE_LOW: LSE oscillator low drive capability.
+  *            @arg RCC_LSEDRIVE_MEDIUMLOW: LSE oscillator medium low drive capability.
+  *            @arg RCC_LSEDRIVE_MEDIUMHIGH: LSE oscillator medium high drive capability.
+  *            @arg RCC_LSEDRIVE_HIGH: LSE oscillator high drive capability.
+  * @retval None
+  */
+#define __HAL_RCC_LSEDRIVE_CONFIG(__RCC_LSEDRIVE__) \
+                  (MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, (uint32_t)(__RCC_LSEDRIVE__) ))
+
+/** @brief  Macro to get the oscillator used as PLL clock source.
+  * @retval The oscillator used as PLL clock source. The returned value can be one
+  *         of the following:
+  *              - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+  *              - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+  */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC))
+/**
+  * @}
+  */
+  
+/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
+  * @{   
+  */ 
+  
+/** @brief  Macro to configure the MCO1 clock.
+  * @param  __MCOCLKSOURCE__ specifies the MCO clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
+  *            @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
+  *            @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
+  *            @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
+  * @param  __MCODIV__ specifies the MCO clock prescaler.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCODIV_1: no division applied to MCOx clock
+  *            @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+  *            @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+  *            @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+  *            @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+  */
+
+#define __HAL_RCC_MCO1_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+        MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), ((__MCOCLKSOURCE__) | (__MCODIV__)))
+                
+/** @brief  Macro to configure the MCO2 clock.
+  * @param  __MCOCLKSOURCE__ specifies the MCO clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
+  *            @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source 
+  *            @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
+  *            @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
+  * @param  __MCODIV__ specifies the MCO clock prescaler.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_MCODIV_1: no division applied to MCOx clock
+  *            @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
+  *            @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
+  *            @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
+  *            @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
+  */
+
+#define __HAL_RCC_MCO2_CONFIG(__MCOCLKSOURCE__, __MCODIV__) \
+        MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), ((__MCOCLKSOURCE__) | ((__MCODIV__) << 3)));
+/**
+  * @}
+  */
+  
+/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
+  * @brief macros to manage the specified RCC Flags and interrupts.
+  * @{
+  */
+
+/** @brief  Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable
+  *         the selected interrupts).
+  * @param  __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
+  *         This parameter can be any combination of the following values:
+  *            @arg RCC_IT_LSIRDY: LSI ready interrupt.
+  *            @arg RCC_IT_LSERDY: LSE ready interrupt.
+  *            @arg RCC_IT_HSIRDY: HSI ready interrupt.
+  *            @arg RCC_IT_HSERDY: HSE ready interrupt.
+  *            @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+  *            @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+  */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable 
+  *        the selected interrupts).
+  * @param  __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
+  *         This parameter can be any combination of the following values:
+  *            @arg RCC_IT_LSIRDY: LSI ready interrupt.
+  *            @arg RCC_IT_LSERDY: LSE ready interrupt.
+  *            @arg RCC_IT_HSIRDY: HSI ready interrupt.
+  *            @arg RCC_IT_HSERDY: HSE ready interrupt.
+  *            @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+  *            @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+  */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
+
+/** @brief  Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
+  *         bits to clear the selected interrupt pending bits.
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear.
+  *         This parameter can be any combination of the following values:
+  *            @arg RCC_IT_LSIRDY: LSI ready interrupt.
+  *            @arg RCC_IT_LSERDY: LSE ready interrupt.
+  *            @arg RCC_IT_HSIRDY: HSI ready interrupt.
+  *            @arg RCC_IT_HSERDY: HSE ready interrupt.
+  *            @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+  *            @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.  
+  *            @arg RCC_IT_CSS: Clock Security System interrupt
+  */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief  Check the RCC's interrupt has occurred or not.
+  * @param  __INTERRUPT__: specifies the RCC interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_IT_LSIRDY: LSI ready interrupt.
+  *            @arg RCC_IT_LSERDY: LSE ready interrupt.
+  *            @arg RCC_IT_HSIRDY: HSI ready interrupt.
+  *            @arg RCC_IT_HSERDY: HSE ready interrupt.
+  *            @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+  *            @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+  *            @arg RCC_IT_CSS: Clock Security System interrupt
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST, 
+  *        RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST.
+  */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
+
+/** @brief  Check RCC flag is set or not.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready.
+  *            @arg RCC_FLAG_HSERDY: HSE oscillator clock ready.
+  *            @arg RCC_FLAG_PLLRDY: Main PLL clock ready.
+  *            @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready.
+  *            @arg RCC_FLAG_LSERDY: LSE oscillator clock ready.
+  *            @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready.
+  *            @arg RCC_FLAG_BORRST: POR/PDR or BOR reset.
+  *            @arg RCC_FLAG_PINRST: Pin reset.
+  *            @arg RCC_FLAG_PORRST: POR/PDR reset.
+  *            @arg RCC_FLAG_SFTRST: Software reset.
+  *            @arg RCC_FLAG_IWDGRST: Independent Watchdog reset.
+  *            @arg RCC_FLAG_WWDGRST: Window Watchdog reset.
+  *            @arg RCC_FLAG_LPWRRST: Low Power reset.
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define RCC_FLAG_MASK  ((uint8_t)0x1F)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->BDCR :((((__FLAG__) >> 5) == 3)? RCC->CSR :RCC->CIR))) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))!= 0)? 1 : 0)
+
+/**
+  * @}
+  */
+     
+/**
+  * @}
+  */
+
+/* Include RCC HAL Extension module */
+#include "stm32f7xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+ /** @addtogroup RCC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+  * @{
+  */                             
+/* Initialization and de-initialization functions  ******************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+/**
+  * @}
+  */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+  * @{
+  */
+/* Peripheral Control functions  ************************************************/
+void     HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void     HAL_RCC_EnableCSS(void);
+void     HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void     HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void     HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */ 
+void HAL_RCC_CSSCallback(void);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Constants RCC Private Constants
+  * @{
+  */
+#define HSE_TIMEOUT_VALUE          HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE          ((uint32_t)100)  /* 100 ms */
+#define LSI_TIMEOUT_VALUE          ((uint32_t)100)  /* 100 ms */
+#define PLL_TIMEOUT_VALUE          ((uint32_t)100)  /* 100 ms */
+#define CLOCKSWITCH_TIMEOUT_VALUE  ((uint32_t)5000) /* 5 s    */ 
+
+/** @defgroup RCC_BitAddress_Alias RCC BitAddress Alias
+  * @brief RCC registers bit address alias
+  * @{
+  */
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS         ((uint32_t)(RCC_BASE + 0x0C + 0x01))
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS         ((uint32_t)(RCC_BASE + 0x0C + 0x02))
+
+#define RCC_DBP_TIMEOUT_VALUE      ((uint32_t)100)
+#define RCC_LSE_TIMEOUT_VALUE      ((uint32_t)5000)
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCC_Private_Macros RCC Private Macros
+  * @{
+  */
+    
+/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters
+  * @{
+  */  
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+                         ((HSE) == RCC_HSE_BYPASS))
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+                         ((LSE) == RCC_LSE_BYPASS))
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+                                  ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+                                     ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+                                     ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
+#define IS_RCC_PLLM_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 63))
+
+#define IS_RCC_PLLN_VALUE(VALUE) ((50 <= (VALUE)) && ((VALUE) <= 432))
+
+#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == RCC_PLLP_DIV2) || ((VALUE) == RCC_PLLP_DIV4) || \
+                                  ((VALUE) == RCC_PLLP_DIV6) || ((VALUE) == RCC_PLLP_DIV8))
+#define IS_RCC_PLLQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1)   || ((HCLK) == RCC_SYSCLK_DIV2)   || \
+                           ((HCLK) == RCC_SYSCLK_DIV4)   || ((HCLK) == RCC_SYSCLK_DIV8)   || \
+                           ((HCLK) == RCC_SYSCLK_DIV16)  || ((HCLK) == RCC_SYSCLK_DIV64)  || \
+                           ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \
+                           ((HCLK) == RCC_SYSCLK_DIV512))
+
+#define IS_RCC_CLOCKTYPE(CLK) ((1 <= (CLK)) && ((CLK) <= 15))
+
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \
+                           ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \
+                           ((PCLK) == RCC_HCLK_DIV16))
+
+#define IS_RCC_MCO(MCOX) (((MCOX) == RCC_MCO1) || ((MCOX) == RCC_MCO2))
+
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+                                   ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK))
+
+#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \
+                                   ((SOURCE) == RCC_MCO2SOURCE_HSE)    || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1)  || ((DIV) == RCC_MCODIV_2) || \
+                             ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \
+                             ((DIV) == RCC_MCODIV_5)) 
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+
+#define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_LSE) || ((SOURCE) == RCC_RTCCLKSOURCE_LSI) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV2) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV3) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV4) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV5) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV6) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV7) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV8) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV9) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV10) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV11) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV12) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV13) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV14) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV15) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV16) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV17) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV18) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV19) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV20) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV21) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV22) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV23) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV24) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV25) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV26) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV27) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV28) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV29) || \
+                                     ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV30) || ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV31))
+
+
+#define IS_RCC_LSE_DRIVE(DRIVE) (((DRIVE) == RCC_LSEDRIVE_LOW)        || \
+                                 ((DRIVE) == RCC_LSEDRIVE_MEDIUMLOW)  || \
+                                 ((DRIVE) == RCC_LSEDRIVE_MEDIUMHIGH) || \
+                                 ((DRIVE) == RCC_LSEDRIVE_HIGH))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_rcc_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,926 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_rcc_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Extension RCC HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities RCC extension peripheral:
+  *           + Extended Peripheral Control functions
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RCCEx RCCEx
+  * @brief RCCEx HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Defines RCCEx Private Defines
+  * @{
+  */
+  
+#define PLLI2S_TIMEOUT_VALUE    100 /* Timeout value fixed to 100 ms  */
+#define PLLSAI_TIMEOUT_VALUE    100 /* Timeout value fixed to 100 ms  */
+
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+
+/**
+  * @}
+  */
+
+
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
+  * @{
+  */
+
+/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions 
+ *  @brief  Extended Peripheral Control functions  
+ *
+@verbatim   
+ ===============================================================================
+                ##### Extended Peripheral Control functions  #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the RCC Clocks 
+    frequencies.
+    [..] 
+    (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
+        select the RTC clock source; in this case the Backup domain will be reset in  
+        order to modify the RTC Clock source, as consequence RTC registers (including 
+        the backup registers) and RCC_BDCR register will be set to their reset values.
+      
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the RCC extended peripherals clocks according to the specified
+  *         parameters in the RCC_PeriphCLKInitTypeDef.
+  * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
+  *         contains the configuration information for the Extended Peripherals
+  *         clocks(I2S, SAI, LTDC RTC, TIM, UARTs, USARTs, LTPIM, SDMMC...).
+  *         
+  * @note   Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select 
+  *         the RTC clock source; in this case the Backup domain will be reset in  
+  *         order to modify the RTC Clock source, as consequence RTC registers (including 
+  *         the backup registers) and RCC_BDCR register are set to their reset values.
+  *
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tickstart = 0;
+  uint32_t tmpreg0 = 0;
+  uint32_t tmpreg1 = 0;
+  uint32_t plli2sused = 0;
+  uint32_t pllsaiused = 0;
+    
+  /* Check the parameters */
+  assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
+  
+  /*----------------------------------- I2S configuration ----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_I2SCLKSOURCE(PeriphClkInit->I2sClockSelection));
+    
+    /* Configure I2S Clock source */
+    __HAL_RCC_I2S_CONFIG(PeriphClkInit->I2sClockSelection);
+    
+    /* Enable the PLLI2S when it's used as clock source for I2S */
+    if(PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S)
+    {
+      plli2sused = 1; 
+    }
+  }
+  
+  /*------------------------------------ SAI1 configuration --------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1))
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection));
+    
+    /* Configure SAI1 Clock source */
+    __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection);
+    /* Enable the PLLI2S when it's used as clock source for SAI */
+    if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)
+    {
+      plli2sused = 1; 
+    }
+    /* Enable the PLLSAI when it's used as clock source for SAI */
+    if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)
+    {
+      pllsaiused = 1; 
+    }
+  }
+  
+  /*------------------------------------ SAI2 configuration --------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2))
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection));
+    
+    /* Configure SAI2 Clock source */
+    __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection);
+    
+    /* Enable the PLLI2S when it's used as clock source for SAI */
+    if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)
+    {
+      plli2sused = 1; 
+    }
+    /* Enable the PLLSAI when it's used as clock source for SAI */
+    if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)
+    {
+      pllsaiused = 1; 
+    }
+  }
+  
+  /*-------------------------------------- SPDIF-RX Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX)
+  {    
+      plli2sused = 1; 
+  }  
+  
+  /*------------------------------------ RTC configuration --------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
+  {
+    /* Enable Power Clock*/
+    __HAL_RCC_PWR_CLK_ENABLE();
+      
+    /* Enable write access to Backup domain */
+    PWR->CR1 |= PWR_CR1_DBP;
+      
+    /* Get Start Tick*/
+    tickstart = HAL_GetTick();
+      
+    /* Wait for Backup domain Write protection disable */
+    while((PWR->CR1 & PWR_CR1_DBP) == RESET)
+    {
+      if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE)
+      {
+        return HAL_TIMEOUT;
+      }      
+    }
+    /* Reset the Backup domain only if the RTC Clock source selection is modified */ 
+    if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
+    {
+      /* Store the content of BDCR register before the reset of Backup Domain */
+      tmpreg0 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+      
+      /* RTC Clock selection can be changed only if the Backup Domain is reset */
+      __HAL_RCC_BACKUPRESET_FORCE();
+      __HAL_RCC_BACKUPRESET_RELEASE();
+      
+      /* Restore the Content of BDCR register */
+      RCC->BDCR = tmpreg0;
+      
+      /* If LSE is selected as RTC clock source, wait for LSE reactivation */
+      if (HAL_IS_BIT_SET(tmpreg0, RCC_BDCR_LSERDY))
+      {
+        /* Get Start Tick*/
+        tickstart = HAL_GetTick();
+        
+        /* Wait till LSE is ready */  
+        while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+        {
+          if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+          {
+            return HAL_TIMEOUT;
+          }
+        }
+      }
+      __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); 			
+    }
+  }
+
+  /*------------------------------------ TIM configuration --------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_TIMPRES(PeriphClkInit->TIMPresSelection));
+    
+    /* Configure Timer Prescaler */
+    __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
+  }
+  
+  /*-------------------------------------- I2C1 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection));
+    
+    /* Configure the I2C1 clock source */
+    __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection);
+  }
+  
+  /*-------------------------------------- I2C2 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection));
+    
+    /* Configure the I2C2 clock source */
+    __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection);
+  }
+  
+  /*-------------------------------------- I2C3 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection));
+    
+    /* Configure the I2C3 clock source */
+    __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection);
+  }
+    
+  /*-------------------------------------- I2C4 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_I2C4CLKSOURCE(PeriphClkInit->I2c4ClockSelection));
+    
+    /* Configure the I2C4 clock source */
+    __HAL_RCC_I2C4_CONFIG(PeriphClkInit->I2c4ClockSelection);
+  }
+
+  /*-------------------------------------- USART1 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection));
+    
+    /* Configure the USART1 clock source */
+    __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection);
+  }
+
+  /*-------------------------------------- USART2 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection));
+    
+    /* Configure the USART2 clock source */
+    __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection);
+  }
+
+  /*-------------------------------------- USART3 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection));
+    
+    /* Configure the USART3 clock source */
+    __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection);
+  }
+
+  /*-------------------------------------- UART4 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection));
+    
+    /* Configure the UART4 clock source */
+    __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection);
+  }
+
+  /*-------------------------------------- UART5 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection));
+    
+    /* Configure the UART5 clock source */
+    __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection);
+  }
+
+  /*-------------------------------------- USART6 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART6) == RCC_PERIPHCLK_USART6)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_USART6CLKSOURCE(PeriphClkInit->Usart6ClockSelection));
+    
+    /* Configure the USART6 clock source */
+    __HAL_RCC_USART6_CONFIG(PeriphClkInit->Usart6ClockSelection);
+  }
+
+  /*-------------------------------------- UART7 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART7) == RCC_PERIPHCLK_UART7)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_UART7CLKSOURCE(PeriphClkInit->Uart7ClockSelection));
+    
+    /* Configure the UART7 clock source */
+    __HAL_RCC_UART7_CONFIG(PeriphClkInit->Uart7ClockSelection);
+  }
+
+  /*-------------------------------------- UART8 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART8) == RCC_PERIPHCLK_UART8)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_UART8CLKSOURCE(PeriphClkInit->Uart8ClockSelection));
+    
+    /* Configure the UART8 clock source */
+    __HAL_RCC_UART8_CONFIG(PeriphClkInit->Uart8ClockSelection);
+  }
+  
+  /*--------------------------------------- CEC Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection));
+    
+    /* Configure the CEC clock source */
+    __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection);
+  }
+  
+  /*-------------------------------------- CK48 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_CLK48SOURCE(PeriphClkInit->Clk48ClockSelection));
+    
+    /* Configure the CLK48 source */
+    __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
+
+    /* Enable the PLLSAI when it's used as clock source for CK48 */
+    if(PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP)
+    {
+      pllsaiused = 1; 
+    }
+  }
+
+  /*-------------------------------------- LTDC Configuration -----------------------------------*/
+#if defined(STM32F756xx) || defined(STM32F746xx)
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC)
+  {
+    pllsaiused = 1; 
+  }
+#endif /* STM32F756xx || STM32F746xx */
+  /*-------------------------------------- LPTIM1 Configuration -----------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == RCC_PERIPHCLK_LPTIM1)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_LPTIM1CLK(PeriphClkInit->Lptim1ClockSelection));
+    
+    /* Configure the LTPIM1 clock source */
+    __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection);
+   }
+  
+  /*------------------------------------- SDMMC1 Configuration ------------------------------------*/
+  if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC1) == RCC_PERIPHCLK_SDMMC1)
+  {
+    /* Check the parameters */
+    assert_param(IS_RCC_SDMMC1CLKSOURCE(PeriphClkInit->Sdmmc1ClockSelection));
+    
+    /* Configure the SDMMC1 clock source */
+    __HAL_RCC_SDMMC1_CONFIG(PeriphClkInit->Sdmmc1ClockSelection);
+  }
+
+  /*-------------------------------------- PLLI2S Configuration ---------------------------------*/
+  /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S or SPDIF-RX */
+  if((plli2sused == 1) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S))
+  {
+    /* Disable the PLLI2S */
+    __HAL_RCC_PLLI2S_DISABLE();  
+    
+    /* Get Start Tick*/
+    tickstart = HAL_GetTick();
+    
+    /* Wait till PLLI2S is disabled */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  != RESET)
+    {
+      if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */         
+        return HAL_TIMEOUT;
+      }
+    }
+    
+    /* check for common PLLI2S Parameters */
+    assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
+      
+    /*----------------- In Case of PLLI2S is selected as source clock for I2S -------------------*/ 
+    if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) && (PeriphClkInit->I2sClockSelection == RCC_I2SCLKSOURCE_PLLI2S)))
+    {
+      /* check for Parameters */
+      assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+    
+      /* Read PLLI2SP and PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */
+      tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP));
+      tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */
+      /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , tmpreg0, tmpreg1, PeriphClkInit->PLLI2S.PLLI2SR);
+    }
+        
+    /*----------------- In Case of PLLI2S is selected as source clock for SAI -------------------*/  
+    if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) ||
+       ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S))) 
+    {
+      /* Check for PLLI2S Parameters */
+      assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+      /* Check for PLLI2S/DIVQ parameters */
+      assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
+            
+      /* Read PLLI2SP and PLLI2SR values from PLLI2SCFGR register (this value is not needed for SAI configuration) */
+      tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP));
+      tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+      /* Configure the PLLI2S division factors */      
+      /* PLLI2S_VCO Input  = PLL_SOURCE/PLLM */
+      /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+      /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN, tmpreg0, PeriphClkInit->PLLI2S.PLLI2SQ, tmpreg1);
+   
+      /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */ 
+      __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);   
+    }          
+
+    /*----------------- In Case of PLLI2S is selected as source clock for SPDIF-RX -------------------*/  
+    if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX)
+    {
+      /* check for Parameters */
+      assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+     
+     /* Read PLLI2SR value from PLLI2SCFGR register (this value is not needed for SPDIF-RX configuration) */
+      tmpreg0 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+      tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLM) */
+      /* SPDIFCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, tmpreg0, tmpreg1);
+    }  
+         
+    /*----------------- In Case of PLLI2S is just selected  -----------------*/  
+    if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
+    {
+      /* Check for Parameters */
+      assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
+      assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
+      assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
+
+      /* Configure the PLLI2S division factors */
+      /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) x (PLLI2SN/PLLI2SM) */
+      /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
+      __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
+    } 
+    
+    /* Enable the PLLI2S */
+    __HAL_RCC_PLLI2S_ENABLE();
+    
+    /* Get Start Tick*/
+    tickstart = HAL_GetTick();
+
+    /* Wait till PLLI2S is ready */
+    while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY)  == RESET)
+    {
+      if((HAL_GetTick() - tickstart) > PLLI2S_TIMEOUT_VALUE)
+      {
+        /* return in case of Timeout detected */                
+        return HAL_TIMEOUT;
+      }
+    }
+  } 
+  
+  /*-------------------------------------- PLLSAI Configuration ---------------------------------*/
+  /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, LTDC or CK48 */
+  if(pllsaiused == 1)
+  {
+    /* Disable PLLSAI Clock */
+    __HAL_RCC_PLLSAI_DISABLE(); 
+    
+    /* Get Start Tick*/
+    tickstart = HAL_GetTick();
+
+    /* Wait till PLLSAI is disabled */
+    while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
+    {
+      if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+      { 
+        /* return in case of Timeout detected */        
+        return HAL_TIMEOUT;
+      }
+    } 
+    
+    /* Check the PLLSAI division factors */
+    assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
+    
+    /*----------------- In Case of PLLSAI is selected as source clock for SAI -------------------*/  
+    if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) ||\
+       ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)))
+    {
+      /* check for PLLSAIQ Parameter */
+      assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
+      /* check for PLLSAI/DIVQ Parameter */
+      assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
+    
+      /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
+      tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP));
+      tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+      /* PLLSAI_VCO Input  = PLL_SOURCE/PLLM */
+      /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+      /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+      __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg0, PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1);
+      
+      /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */ 
+      __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
+    }           
+
+    /*----------------- In Case of PLLSAI is selected as source clock for CLK48 -------------------*/   
+    /* In Case of PLLI2S is selected as source clock for CK48 */ 
+    if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CLK48) == RCC_PERIPHCLK_CLK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CLK48SOURCE_PLLSAIP))
+    {
+      /* check for Parameters */
+      assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP));
+      /* Read PLLSAIQ and PLLSAIR value from PLLSAICFGR register (this value is not needed for CK48 configuration) */
+      tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+      tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
+      
+      /* Configure the PLLSAI division factors */
+      /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) x (PLLI2SN/PLLM) */
+      /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */
+      __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, tmpreg0, tmpreg1);
+    }        
+
+#if defined(STM32F756xx) || defined(STM32F746xx)
+    /*---------------------------- LTDC configuration -------------------------------*/
+    if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC))
+    {
+      assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR));
+      assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR));
+      
+      /* Read PLLSAIP and PLLSAIQ value from PLLSAICFGR register (these value are not needed for LTDC configuration) */
+      tmpreg0 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
+      tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP));
+      
+      /* PLLSAI_VCO Input  = PLL_SOURCE/PLLM */
+      /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+      /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */
+      __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, tmpreg0, PeriphClkInit->PLLSAI.PLLSAIR);
+      
+      /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */ 
+      __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR);
+    }    
+#endif /* STM32F756xx || STM32F746xx */  
+
+    /* Enable PLLSAI Clock */
+    __HAL_RCC_PLLSAI_ENABLE();
+    
+    /* Get Start Tick*/
+    tickstart = HAL_GetTick();
+
+    /* Wait till PLLSAI is ready */
+    while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
+    {
+      if((HAL_GetTick() - tickstart) > PLLSAI_TIMEOUT_VALUE)
+      { 
+        /* return in case of Timeout detected */        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Get the RCC_PeriphCLKInitTypeDef according to the internal
+  *         RCC configuration registers.
+  * @param  PeriphClkInit: pointer to the configured RCC_PeriphCLKInitTypeDef structure
+  * @retval None
+  */
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
+{
+  uint32_t tempreg = 0;
+  
+  /* Set all possible values for the extended clock type parameter------------*/ 
+  PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S      | RCC_PERIPHCLK_LPTIM1   |\
+                                        RCC_PERIPHCLK_SAI1     | RCC_PERIPHCLK_SAI2     |\
+                                        RCC_PERIPHCLK_TIM      | RCC_PERIPHCLK_RTC      |\
+                                        RCC_PERIPHCLK_CEC      | RCC_PERIPHCLK_I2C4     |\
+                                        RCC_PERIPHCLK_I2C1     | RCC_PERIPHCLK_I2C2     |\
+                                        RCC_PERIPHCLK_I2C3     | RCC_PERIPHCLK_USART1   |\
+                                        RCC_PERIPHCLK_USART2   | RCC_PERIPHCLK_USART3   |\
+                                        RCC_PERIPHCLK_UART4    | RCC_PERIPHCLK_UART5    |\
+                                        RCC_PERIPHCLK_USART6   | RCC_PERIPHCLK_UART7    |\
+                                        RCC_PERIPHCLK_UART8    | RCC_PERIPHCLK_SDMMC1   |\
+                                        RCC_PERIPHCLK_CLK48;
+
+  
+  /* Get the PLLI2S Clock configuration -----------------------------------------------*/
+  PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
+  PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP));
+  PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
+  PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
+  
+  /* Get the PLLSAI Clock configuration -----------------------------------------------*/
+  PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
+  PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP));
+  PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ)); 
+  PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR)); 
+  
+  /* Get the PLLSAI/PLLI2S division factors -------------------------------------------*/
+  PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR1_PLLI2SDIVQ));
+  PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR1_PLLSAIDIVQ));
+  PeriphClkInit->PLLSAIDivR = (uint32_t)((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVR) >> POSITION_VAL(RCC_DCKCFGR1_PLLSAIDIVR));
+
+  /* Get the SAI1 clock configuration ----------------------------------------------*/
+  PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE();
+  
+  /* Get the SAI2 clock configuration ----------------------------------------------*/
+  PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE();
+  
+  /* Get the I2S clock configuration ------------------------------------------*/
+  PeriphClkInit->I2sClockSelection = __HAL_RCC_GET_I2SCLKSOURCE();
+  
+  /* Get the I2C1 clock configuration ------------------------------------------*/
+  PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE();
+  
+  /* Get the I2C2 clock configuration ------------------------------------------*/
+  PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE();
+  
+  /* Get the I2C3 clock configuration ------------------------------------------*/
+  PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE();
+  
+  /* Get the I2C4 clock configuration ------------------------------------------*/
+  PeriphClkInit->I2c4ClockSelection = __HAL_RCC_GET_I2C4_SOURCE();
+  
+  /* Get the USART1 clock configuration ------------------------------------------*/
+  PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE();
+  
+  /* Get the USART2 clock configuration ------------------------------------------*/
+  PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE();
+  
+  /* Get the USART3 clock configuration ------------------------------------------*/
+  PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE();
+  
+  /* Get the UART4 clock configuration ------------------------------------------*/
+  PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE();
+  
+  /* Get the UART5 clock configuration ------------------------------------------*/
+  PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE();
+  
+  /* Get the USART6 clock configuration ------------------------------------------*/
+  PeriphClkInit->Usart6ClockSelection = __HAL_RCC_GET_USART6_SOURCE();
+  
+  /* Get the UART7 clock configuration ------------------------------------------*/
+  PeriphClkInit->Uart7ClockSelection = __HAL_RCC_GET_UART7_SOURCE();
+  
+  /* Get the UART8 clock configuration ------------------------------------------*/
+  PeriphClkInit->Uart8ClockSelection = __HAL_RCC_GET_UART8_SOURCE();
+  
+  /* Get the LPTIM1 clock configuration ------------------------------------------*/
+  PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE();
+  
+  /* Get the CEC clock configuration -----------------------------------------------*/
+  PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE();
+  
+  /* Get the CK48 clock configuration -----------------------------------------------*/
+  PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
+
+  /* Get the SDMMC clock configuration -----------------------------------------------*/
+  PeriphClkInit->Sdmmc1ClockSelection = __HAL_RCC_GET_SDMMC1_SOURCE();
+  
+  /* Get the RTC Clock configuration -----------------------------------------------*/
+  tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
+  PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
+  
+  /* Get the TIM Prescaler configuration --------------------------------------------*/
+  if ((RCC->DCKCFGR1 & RCC_DCKCFGR1_TIMPRE) == RESET)
+  {
+    PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
+  }
+  else
+  {
+    PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
+  }
+}
+
+/**
+  * @brief  Return the peripheral clock frequency for a given peripheral(SAI..) 
+  * @note   Return 0 if peripheral clock identifier not managed by this API
+  * @param  PeriphClk: Peripheral clock identifier
+  *         This parameter can be one of the following values:
+  *            @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock
+  *            @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock
+  * @retval Frequency in KHz
+  */
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
+{
+  uint32_t tmpreg = 0;
+  /* This variable is used to store the SAI clock frequency (value in Hz) */
+  uint32_t frequency = 0;
+  /* This variable is used to store the VCO Input (value in Hz) */
+  uint32_t vcoinput = 0;
+  /* This variable is used to store the SAI clock source */
+  uint32_t saiclocksource = 0;
+  
+  if (PeriphClk == RCC_PERIPHCLK_SAI1)
+  {
+    saiclocksource = RCC->DCKCFGR1;   
+    saiclocksource &= RCC_DCKCFGR1_SAI1SEL;
+    switch (saiclocksource)
+    {
+    case 0: /* PLLSAI is the clock source for SAI1 */ 
+      {
+        /* Configure the PLLSAI division factor */
+        /* PLLSAI_VCO Input  = PLL_SOURCE/PLLM */ 
+        if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+        {
+          /* In Case the PLL Source is HSI (Internal Clock) */
+          vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+        }
+        else
+        {
+          /* In Case the PLL Source is HSE (External Clock) */
+          vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+        }   
+        /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+        /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+        tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24;
+        frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg);
+        
+        /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+        tmpreg = (((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> 8) + 1);
+        frequency = frequency/(tmpreg); 
+        break;       
+      }
+    case RCC_DCKCFGR1_SAI1SEL_0: /* PLLI2S is the clock source for SAI1 */
+      {  
+        /* Configure the PLLI2S division factor */
+        /* PLLI2S_VCO Input  = PLL_SOURCE/PLLM */ 
+        if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+        {
+          /* In Case the PLL Source is HSI (Internal Clock) */
+          vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+        }
+        else
+        {
+          /* In Case the PLL Source is HSE (External Clock) */
+          vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+        }
+        
+        /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+        /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+        tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24;
+        frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg);
+        
+        /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+        tmpreg = ((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) + 1); 
+        frequency = frequency/(tmpreg);
+        break;
+      }
+    case RCC_DCKCFGR1_SAI1SEL_1: /* External clock is the clock source for SAI1 */
+      {
+        frequency = EXTERNAL_CLOCK_VALUE;
+        break;       
+      }
+    default :
+      {
+        break;
+      }
+    }
+  }
+  
+  if (PeriphClk == RCC_PERIPHCLK_SAI2)
+  {
+    saiclocksource = RCC->DCKCFGR1;   
+    saiclocksource &= RCC_DCKCFGR1_SAI2SEL;
+    switch (saiclocksource)
+    {
+    case 0: /* PLLSAI is the clock source for SAI*/ 
+      {
+        /* Configure the PLLSAI division factor */
+        /* PLLSAI_VCO Input  = PLL_SOURCE/PLLM */ 
+        if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+        {
+          /* In Case the PLL Source is HSI (Internal Clock) */
+          vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+        }
+        else
+        {
+          /* In Case the PLL Source is HSE (External Clock) */
+          vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+        }   
+        /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
+        /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
+        tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24;
+        frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg);
+        
+        /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
+        tmpreg = (((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLSAIDIVQ) >> 8) + 1);
+        frequency = frequency/(tmpreg); 
+        break;       
+      }
+    case RCC_DCKCFGR1_SAI2SEL_0: /* PLLI2S is the clock source for SAI2 */
+      {  
+        /* Configure the PLLI2S division factor */
+        /* PLLI2S_VCO Input  = PLL_SOURCE/PLLM */ 
+        if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
+        {
+          /* In Case the PLL Source is HSI (Internal Clock) */
+          vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
+        }
+        else
+        {
+          /* In Case the PLL Source is HSE (External Clock) */
+          vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
+        }
+        
+        /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
+        /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
+        tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24;
+        frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg);
+        
+        /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
+        tmpreg = ((RCC->DCKCFGR1 & RCC_DCKCFGR1_PLLI2SDIVQ) + 1); 
+        frequency = frequency/(tmpreg);
+        break;
+      }
+    case RCC_DCKCFGR1_SAI2SEL_1: /* External clock is the clock source for SAI2 */
+      {
+        frequency = EXTERNAL_CLOCK_VALUE;
+        break;       
+      }
+    default :
+      {
+        break;
+      }
+    }
+  }
+  
+  return frequency;
+}
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RCC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_rcc_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,2723 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_rcc_ex.h
+  * @author  MCD Application Team                                                                                                     
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of RCC HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_RCC_EX_H
+#define __STM32F7xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RCCEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  PLLI2S Clock structure definition  
+  */
+typedef struct
+{
+  uint32_t PLLI2SN;    /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+                            This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+                            This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+  uint32_t PLLI2SR;    /*!< Specifies the division factor for I2S clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 7. 
+                            This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+  uint32_t PLLI2SQ;    /*!< Specifies the division factor for SAI1 clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 15. 
+                            This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+  uint32_t PLLI2SP;    /*!< Specifies the division factor for SPDIF-RX clock.
+                            This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider. 
+                            This parameter will be used only when PLLI2S is selected as Clock Source SPDIF-RX */
+}RCC_PLLI2SInitTypeDef;
+
+/** 
+  * @brief  PLLSAI Clock structure definition  
+  */
+typedef struct
+{
+  uint32_t PLLSAIN;    /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+                            This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+                            This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ 
+                                 
+  uint32_t PLLSAIQ;    /*!< Specifies the division factor for SAI1 clock.
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+                            This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+                              
+  uint32_t PLLSAIR;    /*!< specifies the division factor for LTDC clock
+                            This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+                            This parameter will be used only when PLLSAI is selected as Clock Source LTDC */
+
+  uint32_t PLLSAIP;    /*!< Specifies the division factor for 48MHz clock.
+                            This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider
+                            This parameter will be used only when PLLSAI is disabled */
+}RCC_PLLSAIInitTypeDef;
+
+/** 
+  * @brief  RCC extended clocks structure definition  
+  */
+typedef struct
+{
+  uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+                                      This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+  RCC_PLLI2SInitTypeDef PLLI2S;  /*!< PLL I2S structure parameters. 
+                                      This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+  RCC_PLLSAIInitTypeDef PLLSAI;  /*!< PLL SAI structure parameters. 
+                                      This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+  uint32_t PLLI2SDivQ;           /*!< Specifies the PLLI2S division factor for SAI1 clock.
+                                      This parameter must be a number between Min_Data = 1 and Max_Data = 32
+                                      This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+  uint32_t PLLSAIDivQ;           /*!< Specifies the PLLI2S division factor for SAI1 clock.
+                                      This parameter must be a number between Min_Data = 1 and Max_Data = 32
+                                      This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+  uint32_t PLLSAIDivR;           /*!< Specifies the PLLSAI division factor for LTDC clock.
+                                      This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */
+
+  uint32_t RTCClockSelection;      /*!< Specifies RTC Clock source Selection. 
+                                        This parameter can be a value of @ref RCC_RTC_Clock_Source */
+                                        
+  uint32_t I2sClockSelection;      /*!< Specifies I2S Clock source Selection. 
+                                        This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+  uint32_t TIMPresSelection;      /*!< Specifies TIM Clock Prescalers Selection. 
+                                       This parameter can be a value of @ref RCCEx_TIM_Prescaler_Selection */
+  
+  uint32_t Sai1ClockSelection;     /*!< Specifies SAI1 Clock Prescalers Selection
+                                        This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */
+
+  uint32_t Sai2ClockSelection;     /*!< Specifies SAI2 Clock Prescalers Selection
+                                        This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */
+  
+  uint32_t Usart1ClockSelection; /*!< USART1 clock source      
+                                      This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+  
+  uint32_t Usart2ClockSelection; /*!< USART2 clock source      
+                                      This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+  uint32_t Usart3ClockSelection; /*!< USART3 clock source      
+                                      This parameter can be a value of @ref RCCEx_USART3_Clock_Source */                                
+  
+  uint32_t Uart4ClockSelection;  /*!< UART4 clock source      
+                                      This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+  
+  uint32_t Uart5ClockSelection;  /*!< UART5 clock source      
+                                      This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+  
+  uint32_t Usart6ClockSelection;  /*!< USART6 clock source      
+                                      This parameter can be a value of @ref RCCEx_USART6_Clock_Source */
+  
+  uint32_t Uart7ClockSelection;  /*!< UART7 clock source      
+                                      This parameter can be a value of @ref RCCEx_UART7_Clock_Source */
+  
+  uint32_t Uart8ClockSelection;  /*!< UART8 clock source      
+                                      This parameter can be a value of @ref RCCEx_UART8_Clock_Source */
+  
+  uint32_t I2c1ClockSelection;   /*!< I2C1 clock source      
+                                      This parameter can be a value of @ref RCCEx_I2C1_Clock_Source */
+
+  uint32_t I2c2ClockSelection;   /*!< I2C2 clock source      
+                                      This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+  uint32_t I2c3ClockSelection;   /*!< I2C3 clock source      
+                                      This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+  
+  uint32_t I2c4ClockSelection;   /*!< I2C4 clock source      
+                                      This parameter can be a value of @ref RCCEx_I2C4_Clock_Source */
+  
+  uint32_t Lptim1ClockSelection;   /*!< Specifies LPTIM1 clock source
+                                        This parameter can be a value of @ref RCCEx_LPTIM1_Clock_Source */
+  
+  uint32_t CecClockSelection;      /*!< CEC clock source      
+                                        This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+  
+  uint32_t Clk48ClockSelection;    /*!< Specifies 48Mhz clock source used by USB OTG FS, RNG and SDMMC
+                                        This parameter can be a value of @ref RCCEx_CLK48_Clock_Source */
+  
+  uint32_t Sdmmc1ClockSelection;     /*!< SDMMC1 clock source      
+                                        This parameter can be a value of @ref RCCEx_SDMMC1_Clock_Source */
+}RCC_PeriphCLKInitTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+  * @{
+  */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection
+  * @{
+  */
+#define RCC_PERIPHCLK_I2S             ((uint32_t)0x00000001)
+#if defined(STM32F746xx) || defined(STM32F756xx)
+#define RCC_PERIPHCLK_LTDC            ((uint32_t)0x00000008)
+#endif /* STM32F746xx || STM32F756xx */
+#define RCC_PERIPHCLK_TIM             ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_RTC             ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_USART1          ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_USART2          ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_USART3          ((uint32_t)0x00000100)
+#define RCC_PERIPHCLK_UART4           ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_UART5           ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_USART6          ((uint32_t)0x00000800)
+#define RCC_PERIPHCLK_UART7           ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_UART8           ((uint32_t)0x00002000)
+#define RCC_PERIPHCLK_I2C1            ((uint32_t)0x00004000)
+#define RCC_PERIPHCLK_I2C2            ((uint32_t)0x00008000)
+#define RCC_PERIPHCLK_I2C3            ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_I2C4            ((uint32_t)0x00020000)
+#define RCC_PERIPHCLK_LPTIM1          ((uint32_t)0x00040000)
+#define RCC_PERIPHCLK_SAI1            ((uint32_t)0x00080000)
+#define RCC_PERIPHCLK_SAI2            ((uint32_t)0x00100000)
+#define RCC_PERIPHCLK_CLK48           ((uint32_t)0x00200000)
+#define RCC_PERIPHCLK_CEC             ((uint32_t)0x00400000)
+#define RCC_PERIPHCLK_SDMMC1          ((uint32_t)0x00800000)
+#define RCC_PERIPHCLK_SPDIFRX         ((uint32_t)0x01000000)
+#define RCC_PERIPHCLK_PLLI2S          ((uint32_t)0x02000000)
+
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCCEx PLLI2SP Clock Divider
+  * @{
+  */
+#define RCC_PLLI2SP_DIV2                  ((uint32_t)0x00000000)
+#define RCC_PLLI2SP_DIV4                  ((uint32_t)0x00000001)
+#define RCC_PLLI2SP_DIV6                  ((uint32_t)0x00000002)
+#define RCC_PLLI2SP_DIV8                  ((uint32_t)0x00000003)
+/**
+  * @}
+  */
+  
+/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCCEx PLLSAIP Clock Divider
+  * @{
+  */
+#define RCC_PLLSAIP_DIV2                  ((uint32_t)0x00000000)
+#define RCC_PLLSAIP_DIV4                  ((uint32_t)0x00000001)
+#define RCC_PLLSAIP_DIV6                  ((uint32_t)0x00000002)
+#define RCC_PLLSAIP_DIV8                  ((uint32_t)0x00000003)
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_PLLSAI_DIVR RCCEx PLLSAI DIVR
+  * @{
+  */
+#define RCC_PLLSAIDIVR_2                ((uint32_t)0x00000000)
+#define RCC_PLLSAIDIVR_4                RCC_DCKCFGR1_PLLSAIDIVR_0
+#define RCC_PLLSAIDIVR_8                RCC_DCKCFGR1_PLLSAIDIVR_1
+#define RCC_PLLSAIDIVR_16               RCC_DCKCFGR1_PLLSAIDIVR
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_I2S_Clock_Source RCCEx I2S Clock Source
+  * @{
+  */
+#define RCC_I2SCLKSOURCE_PLLI2S             ((uint32_t)0x00000000)
+#define RCC_I2SCLKSOURCE_EXT                RCC_CFGR_I2SSRC
+
+/**
+  * @}
+  */ 
+  
+  
+/** @defgroup RCCEx_SAI1_Clock_Source RCCEx SAI1 Clock Source
+  * @{
+  */
+#define RCC_SAI1CLKSOURCE_PLLSAI             ((uint32_t)0x00000000)
+#define RCC_SAI1CLKSOURCE_PLLI2S             RCC_DCKCFGR1_SAI1SEL_0
+#define RCC_SAI1CLKSOURCE_PIN                RCC_DCKCFGR1_SAI1SEL_1
+
+/**
+  * @}
+  */ 
+
+/** @defgroup RCCEx_SAI2_Clock_Source RCCEx SAI2 Clock Source
+  * @{
+  */
+#define RCC_SAI2CLKSOURCE_PLLSAI             ((uint32_t)0x00000000)
+#define RCC_SAI2CLKSOURCE_PLLI2S             RCC_DCKCFGR1_SAI2SEL_0
+#define RCC_SAI2CLKSOURCE_PIN                RCC_DCKCFGR1_SAI2SEL_1
+/**
+  * @}
+  */ 
+
+/** @defgroup RCCEx_CEC_Clock_Source RCCEx CEC Clock Source
+  * @{
+  */
+#define RCC_CECCLKSOURCE_LSE             ((uint32_t)0x00000000)
+#define RCC_CECCLKSOURCE_HSI             RCC_DCKCFGR2_CECSEL /* CEC clock is HSI/488*/
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_USART1_Clock_Source RCCEx USART1 Clock Source
+  * @{
+  */
+#define RCC_USART1CLKSOURCE_PCLK2      ((uint32_t)0x00000000)
+#define RCC_USART1CLKSOURCE_SYSCLK     RCC_DCKCFGR2_USART1SEL_0
+#define RCC_USART1CLKSOURCE_HSI        RCC_DCKCFGR2_USART1SEL_1
+#define RCC_USART1CLKSOURCE_LSE        RCC_DCKCFGR2_USART1SEL
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source
+  * @{
+  */
+#define RCC_USART2CLKSOURCE_PCLK1       ((uint32_t)0x00000000)
+#define RCC_USART2CLKSOURCE_SYSCLK     RCC_DCKCFGR2_USART2SEL_0
+#define RCC_USART2CLKSOURCE_HSI        RCC_DCKCFGR2_USART2SEL_1
+#define RCC_USART2CLKSOURCE_LSE        RCC_DCKCFGR2_USART2SEL
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_USART3_Clock_Source RCCEx USART3 Clock Source
+  * @{
+  */
+#define RCC_USART3CLKSOURCE_PCLK1       ((uint32_t)0x00000000)
+#define RCC_USART3CLKSOURCE_SYSCLK     RCC_DCKCFGR2_USART3SEL_0
+#define RCC_USART3CLKSOURCE_HSI        RCC_DCKCFGR2_USART3SEL_1
+#define RCC_USART3CLKSOURCE_LSE        RCC_DCKCFGR2_USART3SEL
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_UART4_Clock_Source RCCEx UART4 Clock Source
+  * @{
+  */
+#define RCC_UART4CLKSOURCE_PCLK1        ((uint32_t)0x00000000)
+#define RCC_UART4CLKSOURCE_SYSCLK       RCC_DCKCFGR2_UART4SEL_0
+#define RCC_UART4CLKSOURCE_HSI          RCC_DCKCFGR2_UART4SEL_1
+#define RCC_UART4CLKSOURCE_LSE          RCC_DCKCFGR2_UART4SEL
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_UART5_Clock_Source RCCEx UART5 Clock Source
+  * @{
+  */
+#define RCC_UART5CLKSOURCE_PCLK1        ((uint32_t)0x00000000)
+#define RCC_UART5CLKSOURCE_SYSCLK       RCC_DCKCFGR2_UART5SEL_0
+#define RCC_UART5CLKSOURCE_HSI          RCC_DCKCFGR2_UART5SEL_1
+#define RCC_UART5CLKSOURCE_LSE          RCC_DCKCFGR2_UART5SEL
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_USART6_Clock_Source RCCEx USART6 Clock Source
+  * @{
+  */
+#define RCC_USART6CLKSOURCE_PCLK2       ((uint32_t)0x00000000)
+#define RCC_USART6CLKSOURCE_SYSCLK      RCC_DCKCFGR2_USART6SEL_0
+#define RCC_USART6CLKSOURCE_HSI         RCC_DCKCFGR2_USART6SEL_1
+#define RCC_USART6CLKSOURCE_LSE         RCC_DCKCFGR2_USART6SEL
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_UART7_Clock_Source RCCEx UART7 Clock Source
+  * @{
+  */
+#define RCC_UART7CLKSOURCE_PCLK1       ((uint32_t)0x00000000)
+#define RCC_UART7CLKSOURCE_SYSCLK      RCC_DCKCFGR2_UART7SEL_0
+#define RCC_UART7CLKSOURCE_HSI         RCC_DCKCFGR2_UART7SEL_1
+#define RCC_UART7CLKSOURCE_LSE         RCC_DCKCFGR2_UART7SEL
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_UART8_Clock_Source RCCEx UART8 Clock Source
+  * @{
+  */
+#define RCC_UART8CLKSOURCE_PCLK1        ((uint32_t)0x00000000)
+#define RCC_UART8CLKSOURCE_SYSCLK      RCC_DCKCFGR2_UART8SEL_0
+#define RCC_UART8CLKSOURCE_HSI         RCC_DCKCFGR2_UART8SEL_1
+#define RCC_UART8CLKSOURCE_LSE         RCC_DCKCFGR2_UART8SEL
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_I2C1_Clock_Source RCCEx I2C1 Clock Source
+  * @{
+  */
+#define RCC_I2C1CLKSOURCE_PCLK1        ((uint32_t)0x00000000)
+#define RCC_I2C1CLKSOURCE_SYSCLK       RCC_DCKCFGR2_I2C1SEL_0
+#define RCC_I2C1CLKSOURCE_HSI          RCC_DCKCFGR2_I2C1SEL_1
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCCEx I2C2 Clock Source
+  * @{
+  */
+#define RCC_I2C2CLKSOURCE_PCLK1        ((uint32_t)0x00000000)
+#define RCC_I2C2CLKSOURCE_SYSCLK       RCC_DCKCFGR2_I2C2SEL_0
+#define RCC_I2C2CLKSOURCE_HSI          RCC_DCKCFGR2_I2C2SEL_1
+
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_I2C3_Clock_Source RCCEx I2C3 Clock Source
+  * @{
+  */
+#define RCC_I2C3CLKSOURCE_PCLK1        ((uint32_t)0x00000000)
+#define RCC_I2C3CLKSOURCE_SYSCLK       RCC_DCKCFGR2_I2C3SEL_0
+#define RCC_I2C3CLKSOURCE_HSI          RCC_DCKCFGR2_I2C3SEL_1
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_I2C4_Clock_Source RCCEx I2C4 Clock Source
+  * @{
+  */
+#define RCC_I2C4CLKSOURCE_PCLK1        ((uint32_t)0x00000000)
+#define RCC_I2C4CLKSOURCE_SYSCLK       RCC_DCKCFGR2_I2C4SEL_0
+#define RCC_I2C4CLKSOURCE_HSI          RCC_DCKCFGR2_I2C4SEL_1
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_LPTIM1_Clock_Source RCCEx LPTIM1 Clock Source
+  * @{
+  */
+#define RCC_LPTIM1CLKSOURCE_PCLK       ((uint32_t)0x00000000)
+#define RCC_LPTIM1CLKSOURCE_LSI        RCC_DCKCFGR2_LPTIM1SEL_0
+#define RCC_LPTIM1CLKSOURCE_HSI        RCC_DCKCFGR2_LPTIM1SEL_1
+#define RCC_LPTIM1CLKSOURCE_LSE        RCC_DCKCFGR2_LPTIM1SEL
+
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_CLK48_Clock_Source RCCEx CLK48 Clock Source
+  * @{
+  */
+#define RCC_CLK48SOURCE_PLL         ((uint32_t)0x00000000)
+#define RCC_CLK48SOURCE_PLLSAIP     RCC_DCKCFGR2_CK48MSEL
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_TIM_Prescaler_Selection RCCEx TIM Prescaler Selection
+  * @{
+  */
+#define RCC_TIMPRES_DESACTIVATED        ((uint32_t)0x00000000)
+#define RCC_TIMPRES_ACTIVATED           RCC_DCKCFGR1_TIMPRE
+/**
+  * @}
+  */
+
+/** @defgroup RCCEx_SDMMC1_Clock_Source RCCEx SDMMC1 Clock Source
+  * @{
+  */
+#define RCC_SDMMC1CLKSOURCE_CLK48              ((uint32_t)0x00000000)
+#define RCC_SDMMC1CLKSOURCE_SYSCLK             RCC_DCKCFGR2_SDMMC1SEL
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+     
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+  * @{
+  */
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable
+  * @brief  Enables or disables the AHB/APB peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before 
+  *         using it.   
+  * @{
+  */
+ 
+/** @brief  Enables or disables the AHB1 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before 
+  *         using it.
+  */
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+									  
+#define __HAL_RCC_DTCMRAMEN_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DTCMRAMEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DTCMRAMEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+									  
+#define __HAL_RCC_DMA2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)  
+
+#define __HAL_RCC_DMA2D_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0) 
+
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_GPIOA_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_GPIOB_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_GPIOC_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_GPIOD_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_GPIOE_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_GPIOF_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_GPIOG_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_GPIOH_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_GPIOI_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_GPIOJ_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_GPIOK_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE()         (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_DTCMRAMEN_CLK_DISABLE()       (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DTCMRAMEN))
+#define __HAL_RCC_DMA2_CLK_DISABLE()            (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
+#define __HAL_RCC_DMA2D_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE()      (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+#define __HAL_RCC_GPIOA_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
+#define __HAL_RCC_GPIOB_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
+#define __HAL_RCC_GPIOC_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN))
+#define __HAL_RCC_GPIOD_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOF_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_GPIOH_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
+#define __HAL_RCC_GPIOI_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __HAL_RCC_GPIOJ_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN))
+#define __HAL_RCC_GPIOK_CLK_DISABLE()           (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN))
+/**
+  * @brief  Enable ETHERNET clock.
+  */
+#define __HAL_RCC_ETHMAC_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_ETHMACTX_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_ETHMACRX_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_ETHMACPTP_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+									  
+#define __HAL_RCC_ETH_CLK_ENABLE()       do {                            \
+                                     __HAL_RCC_ETHMAC_CLK_ENABLE();      \
+                                     __HAL_RCC_ETHMACTX_CLK_ENABLE();    \
+                                     __HAL_RCC_ETHMACRX_CLK_ENABLE();    \
+                                    } while(0)
+/**
+  * @brief  Disable ETHERNET clock.
+  */
+#define __HAL_RCC_ETHMAC_CLK_DISABLE()    (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __HAL_RCC_ETHMACTX_CLK_DISABLE()  (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __HAL_RCC_ETHMACRX_CLK_DISABLE()  (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __HAL_RCC_ETH_CLK_DISABLE()       do {                             \
+                                      __HAL_RCC_ETHMACTX_CLK_DISABLE();    \
+                                      __HAL_RCC_ETHMACRX_CLK_DISABLE();    \
+                                      __HAL_RCC_ETHMAC_CLK_DISABLE();      \
+                                     } while(0)
+                                     
+/** @brief  Enable or disable the AHB2 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before 
+  *         using it.
+  */
+#define __HAL_RCC_DCMI_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_RNG_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_RNGEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_OTGFSEN);\
+                                        UNUSED(tmpreg); \
+					__HAL_RCC_SYSCFG_CLK_ENABLE();\
+                                      } while(0) 
+									  
+#define __HAL_RCC_DCMI_CLK_DISABLE()  (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))                                        
+#define __HAL_RCC_RNG_CLK_DISABLE()   (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))                                        
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN))
+#if defined(STM32F756xx)
+#define __HAL_RCC_CRYP_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_HASH_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+									  
+#define __HAL_RCC_CRYP_CLK_DISABLE()  (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HAL_RCC_HASH_CLK_DISABLE()  (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) 
+#endif /* STM32F756x */
+                                        
+/** @brief  Enables or disables the AHB3 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before 
+  *         using it. 
+  */
+#define __HAL_RCC_FMC_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_QSPI_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_FMC_CLK_DISABLE()   (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+#define __HAL_RCC_QSPI_CLK_DISABLE()  (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+
+/** @brief  Enable or disable the Low Speed APB (APB1) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before 
+  *         using it. 
+  */
+#define __HAL_RCC_TIM2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM3_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM4_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM5_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM6_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM7_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM12_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM13_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM14_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_LPTIM1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_SPI2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_SPI3_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_SPDIFRX_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_USART2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_USART3_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_UART4_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_UART5_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_I2C1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_I2C2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_I2C3_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_I2C4_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C4EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C4EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_CAN1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_CAN2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_CEC_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_DAC_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_UART7_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_UART8_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM2_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_TIM5_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __HAL_RCC_TIM6_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_LPTIM1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_LPTIM1EN))
+#define __HAL_RCC_SPI2_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_SPDIFRX_CLK_DISABLE()(RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN))
+#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_I2C1_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_I2C4_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C4EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE()   (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_CEC_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#define __HAL_RCC_DAC_CLK_DISABLE()    (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+#define __HAL_RCC_UART7_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN))
+#define __HAL_RCC_UART8_CLK_DISABLE()  (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN))
+
+/** @brief  Enable or disable the High Speed APB (APB2) peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before 
+  *         using it.
+  */
+#define __HAL_RCC_TIM1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM8_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_USART1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_USART6_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_ADC1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_ADC2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_ADC3_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_SDMMC1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDMMC1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_SPI1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_SPI4_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM9_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM10_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_TIM11_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_SPI5_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_SPI6_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_SAI1_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#define __HAL_RCC_SAI2_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+
+#if defined (STM32F746xx) || defined (STM32F756xx)
+#define __HAL_RCC_LTDC_CLK_ENABLE()   do { \
+                                      __IO uint32_t tmpreg = 0x00; \
+                                        SET_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
+                                        /* Delay after an RCC peripheral clock enabling */ \
+                                        tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_LTDCEN);\
+                                        UNUSED(tmpreg); \
+                                      } while(0)
+#endif /* STM32F746xx || STM32F756xx */
+                                        
+#define __HAL_RCC_TIM1_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __HAL_RCC_TIM8_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+#define __HAL_RCC_ADC1_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __HAL_RCC_SDMMC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDMMC1EN))
+#define __HAL_RCC_SPI1_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_SPI4_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_TIM9_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE()  (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM11_CLK_DISABLE()  (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
+#define __HAL_RCC_SPI5_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __HAL_RCC_SPI6_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN))
+#define __HAL_RCC_SAI1_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+#define __HAL_RCC_SAI2_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN))
+#if defined (STM32F746xx) || defined (STM32F756xx)
+#define __HAL_RCC_LTDC_CLK_DISABLE()   (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN))
+#endif /* STM32F746xx || STM32F756xx */
+/**
+  * @}
+  */
+
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable_Status Peripheral Clock Enable Disable Status
+  * @brief  Get the enable or disable status of the AHB/APB peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  * @{
+  */
+ 
+/** @brief  Get the enable or disable status of the AHB1 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it. 
+  */
+#define __HAL_RCC_BKPSRAM_IS_CLK_ENABLED()          ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) != RESET)
+#define __HAL_RCC_DTCMRAMEN_IS_CLK_ENABLED()        ((RCC->AHB1ENR & (RCC_AHB1ENR_DTCMRAMEN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_ENABLED()             ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2EN)) != RESET)  
+#define __HAL_RCC_DMA2D_IS_CLK_ENABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_ENABLED()       ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_ENABLED()  ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) != RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_ENABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOAEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_ENABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOBEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_ENABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOCEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_ENABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_ENABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_ENABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_ENABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_ENABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOHEN)) != RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_ENABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) != RESET)
+#define __HAL_RCC_GPIOJ_IS_CLK_ENABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) != RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_ENABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) != RESET)
+
+#define __HAL_RCC_BKPSRAM_IS_CLK_DISABLED()         ((RCC->AHB1ENR & (RCC_AHB1ENR_BKPSRAMEN)) == RESET)
+#define __HAL_RCC_DTCMRAMEN_IS_CLK_DISABLED()       ((RCC->AHB1ENR & (RCC_AHB1ENR_DTCMRAMEN)) == RESET)
+#define __HAL_RCC_DMA2_IS_CLK_DISABLED()            ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2EN)) == RESET)
+#define __HAL_RCC_DMA2D_IS_CLK_DISABLED()           ((RCC->AHB1ENR & (RCC_AHB1ENR_DMA2DEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_DISABLED()      ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_OTGHSULPIEN)) == RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_DISABLED()           ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOAEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_DISABLED()           ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOBEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_DISABLED()           ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOCEN)) == RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_DISABLED()           ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIODEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_DISABLED()           ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOEEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_DISABLED()           ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOFEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_DISABLED()           ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOGEN)) == RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_DISABLED()           ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOHEN)) == RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_DISABLED()           ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOIEN)) == RESET)
+#define __HAL_RCC_GPIOJ_IS_CLK_DISABLED()           ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOJEN)) == RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_DISABLED()           ((RCC->AHB1ENR & (RCC_AHB1ENR_GPIOKEN)) == RESET)
+/**
+  * @brief  Enable ETHERNET clock.
+  */
+#define __HAL_RCC_ETHMAC_IS_CLK_ENABLED()     ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) != RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_ENABLED()   ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) != RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_ENABLED()   ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) != RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_ENABLED()  ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) != RESET)
+#define __HAL_RCC_ETH_IS_CLK_ENABLED()        (__HAL_RCC_ETHMAC_IS_CLK_ENABLED()   && \
+                                               __HAL_RCC_ETHMACTX_IS_CLK_ENABLED() && \
+											   __HAL_RCC_ETHMACRX_IS_CLK_ENABLED())
+
+/**
+  * @brief  Disable ETHERNET clock.
+  */
+#define __HAL_RCC_ETHMAC_IS_CLK_DISABLED()    ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACEN)) == RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_DISABLED()  ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACTXEN)) == RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_DISABLED()  ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACRXEN)) == RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_DISABLED() ((RCC->AHB1ENR & (RCC_AHB1ENR_ETHMACPTPEN)) == RESET)
+#define __HAL_RCC_ETH_IS_CLK_DISABLED()        (__HAL_RCC_ETHMAC_IS_CLK_DISABLED()   && \
+                                                __HAL_RCC_ETHMACTX_IS_CLK_DISABLED() && \
+											    __HAL_RCC_ETHMACRX_IS_CLK_DISABLED())
+
+/** @brief  Get the enable or disable status of the AHB2 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it. 
+  */
+#define __HAL_RCC_DCMI_IS_CLK_ENABLED()        ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) != RESET)
+#define __HAL_RCC_RNG_IS_CLK_ENABLED()         ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_ENABLED()  ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) != RESET)
+                                   
+#define __HAL_RCC_DCMI_IS_CLK_DISABLED()       ((RCC->AHB2ENR & (RCC_AHB2ENR_DCMIEN)) == RESET)
+#define __HAL_RCC_RNG_IS_CLK_DISABLED()        ((RCC->AHB2ENR & (RCC_AHB2ENR_RNGEN)) == RESET)                                        
+#define __HAL_RCC_USB_IS_OTG_FS_CLK_DISABLED() ((RCC->AHB2ENR & (RCC_AHB2ENR_OTGFSEN)) == RESET)
+
+#if defined(STM32F756xx)
+#define __HAL_RCC_CRYP_IS_CLK_ENABLED()   ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) != RESET)
+#define __HAL_RCC_HASH_IS_CLK_ENABLED()   ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) != RESET)
+#define __HAL_RCC_CRYP_IS_CLK_DISABLED()  ((RCC->AHB2ENR & (RCC_AHB2ENR_CRYPEN)) == RESET)
+#define __HAL_RCC_HASH_IS_CLK_DISABLED()  ((RCC->AHB2ENR & (RCC_AHB2ENR_HASHEN)) == RESET) 
+#endif /* STM32F756xx */
+
+/** @brief  Get the enable or disable status of the AHB3 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */  
+#define __HAL_RCC_FMC_IS_CLK_ENABLED()   ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_ENABLED()  ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) != RESET)
+
+#define __HAL_RCC_FMC_IS_CLK_DISABLED()   ((RCC->AHB3ENR & (RCC_AHB3ENR_FMCEN)) == RESET)
+#define __HAL_RCC_QSPI_IS_CLK_DISABLED()  ((RCC->AHB3ENR & (RCC_AHB3ENR_QSPIEN)) == RESET)
+
+/** @brief  Get the enable or disable status of the APB1 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_TIM2_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) != RESET)
+#define __HAL_RCC_TIM5_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_ENABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_ENABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_ENABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) != RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_ENABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) != RESET)
+#define __HAL_RCC_SPDIFRX_IS_CLK_ENABLED() ((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_ENABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_ENABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_ENABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_ENABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) != RESET)
+#define __HAL_RCC_I2C4_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_I2C4EN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_ENABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_ENABLED()     ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_ENABLED()     ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) != RESET)
+#define __HAL_RCC_UART7_IS_CLK_ENABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) != RESET)
+#define __HAL_RCC_UART8_IS_CLK_ENABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_TIM2EN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_TIM3EN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_TIM4EN)) == RESET)
+#define __HAL_RCC_TIM5_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_TIM5EN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_TIM6EN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_TIM7EN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_TIM12EN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_TIM13EN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_TIM14EN)) == RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_LPTIM1EN)) == RESET)
+#define __HAL_RCC_SPI2_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_SPI2EN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_SPI3EN)) == RESET)
+#define __HAL_RCC_SPDIFRX_IS_CLK_DISABLED()((RCC->APB1ENR & (RCC_APB1ENR_SPDIFRXEN)) == RESET)
+#define __HAL_RCC_USART2_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART2EN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_DISABLED() ((RCC->APB1ENR & (RCC_APB1ENR_USART3EN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_UART4EN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_UART5EN)) == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_I2C1EN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_I2C2EN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_I2C3EN)) == RESET)
+#define __HAL_RCC_I2C4_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_I2C4EN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_CAN1EN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_DISABLED()   ((RCC->APB1ENR & (RCC_APB1ENR_CAN2EN)) == RESET)
+#define __HAL_RCC_CEC_IS_CLK_DISABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_CECEN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_DISABLED()    ((RCC->APB1ENR & (RCC_APB1ENR_DACEN)) == RESET)
+#define __HAL_RCC_UART7_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_UART7EN)) == RESET)
+#define __HAL_RCC_UART8_IS_CLK_DISABLED()  ((RCC->APB1ENR & (RCC_APB1ENR_UART8EN)) == RESET)
+
+/** @brief  Get the enable or disable status of the APB2 peripheral clock.
+  * @note   After reset, the peripheral clock (used for registers read/write access)
+  *         is disabled and the application software has to enable this clock before
+  *         using it.
+  */
+#define __HAL_RCC_TIM1_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) != RESET)
+#define __HAL_RCC_USART1_IS_CLK_ENABLED()  ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) != RESET)
+#define __HAL_RCC_USART6_IS_CLK_ENABLED()  ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) != RESET)
+#define __HAL_RCC_ADC1_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) != RESET)
+#define __HAL_RCC_SDMMC1_IS_CLK_ENABLED()  ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC1EN)) != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) != RESET)
+#define __HAL_RCC_TIM9_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_ENABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) != RESET)
+#define __HAL_RCC_TIM11_IS_CLK_ENABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) != RESET)
+#define __HAL_RCC_SPI5_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) != RESET)
+#define __HAL_RCC_SPI6_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) != RESET)
+#define __HAL_RCC_SAI1_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) != RESET)
+#define __HAL_RCC_SAI2_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) != RESET)
+#if defined (STM32F746xx) || defined (STM32F756xx)
+#define __HAL_RCC_LTDC_IS_CLK_ENABLED()    ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) != RESET)
+#endif /* STM32F746xx || STM32F756xx */
+#define __HAL_RCC_TIM1_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_TIM1EN)) == RESET)
+#define __HAL_RCC_TIM8_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_TIM8EN)) == RESET)
+#define __HAL_RCC_USART1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART1EN)) == RESET)
+#define __HAL_RCC_USART6_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_USART6EN)) == RESET)
+#define __HAL_RCC_ADC1_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_ADC1EN)) == RESET)
+#define __HAL_RCC_ADC2_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_ADC2EN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_ADC3EN)) == RESET)
+#define __HAL_RCC_SDMMC1_IS_CLK_DISABLED() ((RCC->APB2ENR & (RCC_APB2ENR_SDMMC1EN)) == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_SPI1EN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_SPI4EN)) == RESET)
+#define __HAL_RCC_TIM9_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_TIM9EN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_DISABLED()  ((RCC->APB2ENR & (RCC_APB2ENR_TIM10EN)) == RESET)
+#define __HAL_RCC_TIM11_IS_CLK_DISABLED()  ((RCC->APB2ENR & (RCC_APB2ENR_TIM11EN)) == RESET)
+#define __HAL_RCC_SPI5_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_SPI5EN)) == RESET)
+#define __HAL_RCC_SPI6_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_SPI6EN)) == RESET)
+#define __HAL_RCC_SAI1_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_SAI1EN)) == RESET)
+#define __HAL_RCC_SAI2_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_SAI2EN)) == RESET)
+#if defined (STM32F746xx) || defined (STM32F756xx)
+#define __HAL_RCC_LTDC_IS_CLK_DISABLED()   ((RCC->APB2ENR & (RCC_APB2ENR_LTDCEN)) == RESET)  
+#endif /* STM32F746xx || STM32F756xx */
+/**
+  * @}
+  */  
+
+/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset
+  * @brief  Forces or releases AHB/APB peripheral reset.
+  * @{
+  */
+  
+/** @brief  Force or release AHB1 peripheral reset.
+  */  
+#define __HAL_RCC_DMA2_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
+#define __HAL_RCC_DMA2D_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST))
+#define __HAL_RCC_ETHMAC_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET()    (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOA_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOH_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_GPIOI_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_GPIOJ_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_FORCE_RESET()   (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST))
+
+#define __HAL_RCC_DMA2_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST))
+#define __HAL_RCC_DMA2D_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST))
+#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET()  (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST))
+ 
+/** @brief  Force or release AHB2 peripheral reset.
+  */
+#define __HAL_RCC_AHB2_FORCE_RESET()    (RCC->AHB2RSTR = 0xFFFFFFFF) 
+#define __HAL_RCC_DCMI_FORCE_RESET()   (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __HAL_RCC_RNG_FORCE_RESET()    (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET()   (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET()  (RCC->AHB2RSTR = 0x00)
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+#define __HAL_RCC_RNG_RELEASE_RESET()  (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+
+#if defined(STM32F756xx)
+#define __HAL_RCC_CRYP_FORCE_RESET()   (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_FORCE_RESET()   (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+#endif /* STM32F756xx */
+
+/** @brief  Force or release AHB3 peripheral reset
+  */ 
+#define __HAL_RCC_AHB3_FORCE_RESET()   (RCC->AHB3RSTR = 0xFFFFFFFF) 
+#define __HAL_RCC_FMC_FORCE_RESET()    (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_FORCE_RESET()   (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00)
+#define __HAL_RCC_FMC_RELEASE_RESET()  (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+ 
+/** @brief  Force or release APB1 peripheral reset.
+  */ 
+#define __HAL_RCC_TIM2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM6_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_LPTIM1_FORCE_RESET()   (RCC->APB1RSTR |= (RCC_APB1RSTR_LPTIM1RST))
+#define __HAL_RCC_SPI2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_SPDIFRX_FORCE_RESET()  (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_USART2_FORCE_RESET()   (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_USART3_FORCE_RESET()   (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_I2C1_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_I2C4_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C4RST))
+#define __HAL_RCC_CAN1_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET()     (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+#define __HAL_RCC_DAC_FORCE_RESET()      (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_FORCE_RESET()    (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST))
+
+#define __HAL_RCC_TIM2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_TIM6_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_LPTIM1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_LPTIM1RST))
+#define __HAL_RCC_SPI2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_SPDIFRX_RELEASE_RESET()(RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_I2C1_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_I2C4_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C4RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET()   (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#define __HAL_RCC_DAC_RELEASE_RESET()    (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_RELEASE_RESET()  (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST))
+
+/** @brief  Force or release APB2 peripheral reset.
+  */
+#define __HAL_RCC_TIM1_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_TIM8_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_USART1_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_FORCE_RESET()      (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SDMMC1_FORCE_RESET()   (RCC->APB2RSTR |= (RCC_APB2RSTR_SDMMC1RST))
+#define __HAL_RCC_SPI1_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SPI4_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM9_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM10_FORCE_RESET()    (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM11_FORCE_RESET()    (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
+#define __HAL_RCC_SPI5_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST))
+#if defined (STM32F746xx) || defined (STM32F756xx)
+#define __HAL_RCC_LTDC_FORCE_RESET()     (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST))
+#endif /* STM32F746xx || STM32F756xx */
+
+#define __HAL_RCC_TIM1_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_RELEASE_RESET()    (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SDMMC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDMMC1RST))
+#define __HAL_RCC_SPI1_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SPI4_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_TIM9_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET()  (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM11_RELEASE_RESET()  (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST))
+#if defined (STM32F746xx) || defined (STM32F756xx)
+#define __HAL_RCC_LTDC_RELEASE_RESET()   (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST))
+#endif /* STM32F746xx || STM32F756xx */
+
+/**
+  * @}
+  */ 
+
+/** @defgroup RCCEx_Peripheral_Clock_Sleep_Enable_Disable RCCEx Peripheral Clock Sleep Enable Disable
+  * @brief  Enables or disables the AHB/APB peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  * @{
+  */ 
+  
+/** @brief  Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+  */ 
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_AXI_CLK_SLEEP_ENABLE()        (RCC->AHB1LPENR |= (RCC_AHB1LPENR_AXILPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE()    (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __HAL_RCC_DTCM_CLK_SLEEP_ENABLE()       (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DTCMLPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE()       (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
+#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE()     (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE()   (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE()   (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE()  (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE()      (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN))
+
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_AXI_CLK_SLEEP_DISABLE()       (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_AXILPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE()   (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __HAL_RCC_DTCM_CLK_SLEEP_DISABLE()      (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DTCMLPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE()      (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN))
+#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE()    (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE()  (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE()  (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE()      (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE()     (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN))
+
+/** @brief  Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE()        (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE()       (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE()         (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE()        (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE()  (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#if defined(STM32F756xx)
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE()        (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE()        (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+                                         
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE()       (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE()       (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F756xx */
+
+/** @brief  Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE()  (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE()  (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+
+/** @brief  Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */  
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE()  (RCC->APB1LPENR |= (RCC_APB1LPENR_LPTIM1LPEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE()  (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE()  (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_I2C4_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C4LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE()    (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE()     (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE()     (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE()   (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_LPTIM1LPEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE()(RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_I2C4_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C4LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE()   (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE()    (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE()    (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE()  (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN))
+
+/** @brief  Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */ 
+#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE()  (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE()  (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE()  (RCC->APB2LPENR |= (RCC_APB2LPENR_SDMMC1LPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE()   (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE()   (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN))
+#if defined (STM32F746xx) || defined (STM32F756xx)
+#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE()    (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN))
+#endif /* STM32F746xx || STM32F756xx */
+
+#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE()  (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDMMC1LPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE()  (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE()  (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN))
+#if defined (STM32F746xx) || defined (STM32F756xx)
+#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE()   (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN))
+#endif /* STM32F746xx || STM32F756xx */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Clock_Sleep_Enable_Disable_Status AHB/APB Peripheral Clock Sleep Enable Disable Status
+  * @brief  Get the enable or disable status of the AHB/APB peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  * @{
+  */
+  
+/** @brief  Get the enable or disable status of the AHB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.  
+  */
+#define __HAL_RCC_FLITF_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_FLITFLPEN)) != RESET)
+#define __HAL_RCC_AXI_IS_CLK_SLEEP_ENABLED()        ((RCC->AHB1LPENR & (RCC_AHB1LPENR_AXILPEN)) != RESET)
+#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM1LPEN)) != RESET)
+#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM2LPEN)) != RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_SLEEP_ENABLED()    ((RCC->AHB1LPENR & (RCC_AHB1LPENR_BKPSRAMLPEN)) != RESET)
+#define __HAL_RCC_DTCM_IS_CLK_SLEEP_ENABLED()       ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DTCMLPEN)) != RESET)
+#define __HAL_RCC_DMA2_IS_CLK_SLEEP_ENABLED()       ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) != RESET)
+#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2DLPEN)) != RESET)
+#define __HAL_RCC_ETHMAC_IS_CLK_SLEEP_ENABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACLPEN)) != RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_SLEEP_ENABLED()   ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACTXLPEN)) != RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_SLEEP_ENABLED()   ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACRXLPEN)) != RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_SLEEP_ENABLED()  ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACPTPLPEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSLPEN)) != RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSULPILPEN)) != RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOALPEN)) != RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOBLPEN)) != RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOCLPEN)) != RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIODLPEN)) != RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOELPEN)) != RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOFLPEN)) != RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOGLPEN)) != RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOHLPEN)) != RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOILPEN)) != RESET)
+#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOJLPEN)) != RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_ENABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOKLPEN)) != RESET)
+
+#define __HAL_RCC_FLITF_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_FLITFLPEN)) == RESET)
+#define __HAL_RCC_AXI_IS_CLK_SLEEP_DISABLED()       ((RCC->AHB1LPENR & (RCC_AHB1LPENR_AXILPEN)) == RESET)
+#define __HAL_RCC_SRAM1_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM1LPEN)) == RESET)
+#define __HAL_RCC_SRAM2_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_SRAM2LPEN)) == RESET)
+#define __HAL_RCC_BKPSRAM_IS_CLK_SLEEP_DISABLED()   ((RCC->AHB1LPENR & (RCC_AHB1LPENR_BKPSRAMLPEN)) == RESET)
+#define __HAL_RCC_DTCM_IS_CLK_SLEEP_DISABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DTCMLPEN)) == RESET)
+#define __HAL_RCC_DMA2_IS_CLK_SLEEP_DISABLED()      ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2LPEN)) == RESET)
+#define __HAL_RCC_DMA2D_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_DMA2DLPEN)) == RESET)
+#define __HAL_RCC_ETHMAC_IS_CLK_SLEEP_DISABLED()    ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACLPEN)) == RESET)
+#define __HAL_RCC_ETHMACTX_IS_CLK_SLEEP_DISABLED()  ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACTXLPEN)) == RESET)
+#define __HAL_RCC_ETHMACRX_IS_CLK_SLEEP_DISABLED()  ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACRXLPEN)) == RESET)
+#define __HAL_RCC_ETHMACPTP_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_ETHMACPTPLPEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSLPEN)) == RESET)
+#define __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB1LPENR & (RCC_AHB1LPENR_OTGHSULPILPEN)) == RESET)
+#define __HAL_RCC_GPIOA_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOALPEN)) == RESET)
+#define __HAL_RCC_GPIOB_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOBLPEN)) == RESET)
+#define __HAL_RCC_GPIOC_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOCLPEN)) == RESET)
+#define __HAL_RCC_GPIOD_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIODLPEN)) == RESET)
+#define __HAL_RCC_GPIOE_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOELPEN)) == RESET)
+#define __HAL_RCC_GPIOF_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOFLPEN)) == RESET)
+#define __HAL_RCC_GPIOG_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOGLPEN)) == RESET)
+#define __HAL_RCC_GPIOH_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOHLPEN)) == RESET)
+#define __HAL_RCC_GPIOI_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOILPEN)) == RESET)
+#define __HAL_RCC_GPIOJ_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOJLPEN)) == RESET)
+#define __HAL_RCC_GPIOK_IS_CLK_SLEEP_DISABLED()     ((RCC->AHB1LPENR & (RCC_AHB1LPENR_GPIOKLPEN)) == RESET)
+
+/** @brief  Get the enable or disable status of the AHB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_DCMI_IS_CLK_SLEEP_ENABLED()        ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) != RESET)
+#define __HAL_RCC_DCMI_IS_CLK_SLEEP_DISABLED()       ((RCC->AHB2LPENR & (RCC_AHB2LPENR_DCMILPEN)) == RESET)
+
+#define __HAL_RCC_RNG_IS_CLK_SLEEP_ENABLED()         ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) != RESET)
+#define __HAL_RCC_RNG_IS_CLK_SLEEP_DISABLED()        ((RCC->AHB2LPENR & (RCC_AHB2LPENR_RNGLPEN)) == RESET)
+
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_ENABLED()  ((RCC->AHB2LPENR & (RCC_AHB2LPENR_OTGFSLPEN)) != RESET)
+#define __HAL_RCC_USB_OTG_FS_IS_CLK_SLEEP_DISABLED() ((RCC->AHB2LPENR & (RCC_AHB2LPENR_OTGFSLPEN)) == RESET)
+
+#if defined(STM32F756xx)
+#define __HAL_RCC_CRYP_IS_CLK_SLEEP_ENABLED()        ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) != RESET)
+#define __HAL_RCC_HASH_IS_CLK_SLEEP_ENABLED()        ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) != RESET)
+                                         
+#define __HAL_RCC_CRYP_IS_CLK_SLEEP_DISABLED()       ((RCC->AHB2LPENR & (RCC_AHB2LPENR_CRYPLPEN)) == RESET)
+#define __HAL_RCC_HASH_IS_CLK_SLEEP_DISABLED()       ((RCC->AHB2LPENR & (RCC_AHB2LPENR_HASHLPEN)) == RESET)
+#endif /* STM32F756xx */
+
+/** @brief  Get the enable or disable status of the AHB3 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */
+#define __HAL_RCC_FMC_IS_CLK_SLEEP_ENABLED()  ((RCC->AHB3LPENR & (RCC_AHB3LPENR_FMCLPEN)) != RESET)
+#define __HAL_RCC_FMC_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_FMCLPEN)) == RESET)
+
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_ENABLED()  ((RCC->AHB3LPENR & (RCC_AHB3LPENR_QSPILPEN)) != RESET)
+#define __HAL_RCC_QSPI_IS_CLK_SLEEP_DISABLED() ((RCC->AHB3LPENR & (RCC_AHB3LPENR_QSPILPEN)) == RESET)
+
+/** @brief  Get the enable or disable status of the APB1 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */  
+#define __HAL_RCC_TIM2_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM2LPEN)) != RESET)
+#define __HAL_RCC_TIM3_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM3LPEN)) != RESET)
+#define __HAL_RCC_TIM4_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM4LPEN)) != RESET)
+#define __HAL_RCC_TIM5_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM5LPEN)) != RESET)
+#define __HAL_RCC_TIM6_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM6LPEN)) != RESET)
+#define __HAL_RCC_TIM7_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM7LPEN)) != RESET)
+#define __HAL_RCC_TIM12_IS_CLK_SLEEP_ENABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM12LPEN)) != RESET)
+#define __HAL_RCC_TIM13_IS_CLK_SLEEP_ENABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM13LPEN)) != RESET)
+#define __HAL_RCC_TIM14_IS_CLK_SLEEP_ENABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM14LPEN)) != RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_ENABLED()  ((RCC->APB1LPENR & (RCC_APB1LPENR_LPTIM1LPEN)) != RESET)
+#define __HAL_RCC_SPI2_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI2LPEN)) != RESET)
+#define __HAL_RCC_SPI3_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI3LPEN)) != RESET)
+#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_ENABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_SPDIFRXLPEN)) != RESET)
+#define __HAL_RCC_USART2_IS_CLK_SLEEP_ENABLED()  ((RCC->APB1LPENR & (RCC_APB1LPENR_USART2LPEN)) != RESET)
+#define __HAL_RCC_USART3_IS_CLK_SLEEP_ENABLED()  ((RCC->APB1LPENR & (RCC_APB1LPENR_USART3LPEN)) != RESET)
+#define __HAL_RCC_UART4_IS_CLK_SLEEP_ENABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_UART4LPEN)) != RESET)
+#define __HAL_RCC_UART5_IS_CLK_SLEEP_ENABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_UART5LPEN)) != RESET)
+#define __HAL_RCC_I2C1_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C1LPEN)) != RESET)
+#define __HAL_RCC_I2C2_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C2LPEN)) != RESET)
+#define __HAL_RCC_I2C3_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C3LPEN)) != RESET)
+#define __HAL_RCC_I2C4_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C4LPEN)) != RESET)
+#define __HAL_RCC_CAN1_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN1LPEN)) != RESET)
+#define __HAL_RCC_CAN2_IS_CLK_SLEEP_ENABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN2LPEN)) != RESET)
+#define __HAL_RCC_CEC_IS_CLK_SLEEP_ENABLED()     ((RCC->APB1LPENR & (RCC_APB1LPENR_CECLPEN)) != RESET)
+#define __HAL_RCC_DAC_IS_CLK_SLEEP_ENABLED()     ((RCC->APB1LPENR & (RCC_APB1LPENR_DACLPEN)) != RESET)
+#define __HAL_RCC_UART7_IS_CLK_SLEEP_ENABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_UART7LPEN)) != RESET)
+#define __HAL_RCC_UART8_IS_CLK_SLEEP_ENABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_UART8LPEN)) != RESET)
+
+#define __HAL_RCC_TIM2_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM2LPEN)) == RESET)
+#define __HAL_RCC_TIM3_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM3LPEN)) == RESET)
+#define __HAL_RCC_TIM4_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM4LPEN)) == RESET)
+#define __HAL_RCC_TIM5_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM5LPEN)) == RESET)
+#define __HAL_RCC_TIM6_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM6LPEN)) == RESET)
+#define __HAL_RCC_TIM7_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM7LPEN)) == RESET)
+#define __HAL_RCC_TIM12_IS_CLK_SLEEP_DISABLED()  ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM12LPEN)) == RESET)
+#define __HAL_RCC_TIM13_IS_CLK_SLEEP_DISABLED()  ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM13LPEN)) == RESET)
+#define __HAL_RCC_TIM14_IS_CLK_SLEEP_DISABLED()  ((RCC->APB1LPENR & (RCC_APB1LPENR_TIM14LPEN)) == RESET)
+#define __HAL_RCC_LPTIM1_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_LPTIM1LPEN)) == RESET)
+#define __HAL_RCC_SPI2_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI2LPEN)) == RESET)
+#define __HAL_RCC_SPI3_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_SPI3LPEN)) == RESET)
+#define __HAL_RCC_SPDIFRX_IS_CLK_SLEEP_DISABLED()((RCC->APB1LPENR & (RCC_APB1LPENR_SPDIFRXLPEN)) == RESET)
+#define __HAL_RCC_USART2_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART2LPEN)) == RESET)
+#define __HAL_RCC_USART3_IS_CLK_SLEEP_DISABLED() ((RCC->APB1LPENR & (RCC_APB1LPENR_USART3LPEN)) == RESET)
+#define __HAL_RCC_UART4_IS_CLK_SLEEP_DISABLED()  ((RCC->APB1LPENR & (RCC_APB1LPENR_UART4LPEN)) == RESET)
+#define __HAL_RCC_UART5_IS_CLK_SLEEP_DISABLED()  ((RCC->APB1LPENR & (RCC_APB1LPENR_UART5LPEN)) == RESET)
+#define __HAL_RCC_I2C1_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C1LPEN)) == RESET)
+#define __HAL_RCC_I2C2_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C2LPEN)) == RESET)
+#define __HAL_RCC_I2C3_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C3LPEN)) == RESET)
+#define __HAL_RCC_I2C4_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_I2C4LPEN)) == RESET)
+#define __HAL_RCC_CAN1_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN1LPEN)) == RESET)
+#define __HAL_RCC_CAN2_IS_CLK_SLEEP_DISABLED()   ((RCC->APB1LPENR & (RCC_APB1LPENR_CAN2LPEN)) == RESET)
+#define __HAL_RCC_CEC_IS_CLK_SLEEP_DISABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_CECLPEN)) == RESET)
+#define __HAL_RCC_DAC_IS_CLK_SLEEP_DISABLED()    ((RCC->APB1LPENR & (RCC_APB1LPENR_DACLPEN)) == RESET)
+#define __HAL_RCC_UART7_IS_CLK_SLEEP_DISABLED()  ((RCC->APB1LPENR & (RCC_APB1LPENR_UART7LPEN)) == RESET)
+#define __HAL_RCC_UART8_IS_CLK_SLEEP_DISABLED()  ((RCC->APB1LPENR & (RCC_APB1LPENR_UART8LPEN)) == RESET)
+
+/** @brief  Get the enable or disable status of the APB2 peripheral clock during Low Power (Sleep) mode.
+  * @note   Peripheral clock gating in SLEEP mode can be used to further reduce
+  *         power consumption.
+  * @note   After wakeup from SLEEP mode, the peripheral clock is enabled again.
+  * @note   By default, all peripheral clocks are enabled during SLEEP mode.
+  */ 
+#define __HAL_RCC_TIM1_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) != RESET)
+#define __HAL_RCC_TIM8_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) != RESET)
+#define __HAL_RCC_USART1_IS_CLK_SLEEP_ENABLED()  ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) != RESET)
+#define __HAL_RCC_USART6_IS_CLK_SLEEP_ENABLED()  ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) != RESET)
+#define __HAL_RCC_ADC1_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC1LPEN)) != RESET)
+#define __HAL_RCC_ADC2_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC2LPEN)) != RESET)
+#define __HAL_RCC_ADC3_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC3LPEN)) != RESET)
+#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_ENABLED()  ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC1LPEN)) != RESET)
+#define __HAL_RCC_SPI1_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) != RESET)
+#define __HAL_RCC_SPI4_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) != RESET)
+#define __HAL_RCC_TIM9_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM9LPEN)) != RESET)
+#define __HAL_RCC_TIM10_IS_CLK_SLEEP_ENABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM10LPEN)) != RESET)
+#define __HAL_RCC_TIM11_IS_CLK_SLEEP_ENABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM11LPEN)) != RESET)
+#define __HAL_RCC_SPI5_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) != RESET)
+#define __HAL_RCC_SPI6_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI6LPEN)) != RESET)
+#define __HAL_RCC_SAI1_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) != RESET)
+#define __HAL_RCC_SAI2_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) != RESET)
+#if defined (STM32F746xx) || defined (STM32F756xx)
+#define __HAL_RCC_LTDC_IS_CLK_SLEEP_ENABLED()    ((RCC->APB2LPENR & (RCC_APB2LPENR_LTDCLPEN)) != RESET)
+#endif /* STM32F746xx || STM32F756xx */
+
+#define __HAL_RCC_TIM1_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM1LPEN)) == RESET)
+#define __HAL_RCC_TIM8_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM8LPEN)) == RESET)
+#define __HAL_RCC_USART1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART1LPEN)) == RESET)
+#define __HAL_RCC_USART6_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_USART6LPEN)) == RESET)
+#define __HAL_RCC_ADC1_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC1LPEN)) == RESET)
+#define __HAL_RCC_ADC2_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC2LPEN)) == RESET)
+#define __HAL_RCC_ADC3_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_ADC3LPEN)) == RESET)
+#define __HAL_RCC_SDMMC1_IS_CLK_SLEEP_DISABLED() ((RCC->APB2LPENR & (RCC_APB2LPENR_SDMMC1LPEN)) == RESET)
+#define __HAL_RCC_SPI1_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI1LPEN)) == RESET)
+#define __HAL_RCC_SPI4_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI4LPEN)) == RESET)
+#define __HAL_RCC_TIM9_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM9LPEN)) == RESET)
+#define __HAL_RCC_TIM10_IS_CLK_SLEEP_DISABLED()  ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM10LPEN)) == RESET)
+#define __HAL_RCC_TIM11_IS_CLK_SLEEP_DISABLED()  ((RCC->APB2LPENR & (RCC_APB2LPENR_TIM11LPEN)) == RESET)
+#define __HAL_RCC_SPI5_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI5LPEN)) == RESET)
+#define __HAL_RCC_SPI6_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_SPI6LPEN)) == RESET)
+#define __HAL_RCC_SAI1_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI1LPEN)) == RESET)
+#define __HAL_RCC_SAI2_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_SAI2LPEN)) == RESET)
+#if defined (STM32F746xx) || defined (STM32F756xx)
+#define __HAL_RCC_LTDC_IS_CLK_SLEEP_DISABLED()   ((RCC->APB2LPENR & (RCC_APB2LPENR_LTDCLPEN)) == RESET)
+#endif /* STM32F746xx || STM32F756xx */
+
+/**
+  * @}
+  */
+
+/*---------------------------------------------------------------------------------------------*/
+
+/** @brief  Macro to configure the Timers clocks prescalers 
+  * @param  __PRESC__ : specifies the Timers clocks prescalers selection
+  *         This parameter can be one of the following values:
+  *            @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is 
+  *                 equal to HPRE if PPREx is corresponding to division by 1 or 2, 
+  *                 else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to 
+  *                 division by 4 or more.       
+  *            @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is 
+  *                 equal to HPRE if PPREx is corresponding to division by 1, 2 or 4, 
+  *                 else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding 
+  *                 to division by 8 or more.
+  */     
+#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) do {RCC->DCKCFGR1 &= ~(RCC_DCKCFGR1_TIMPRE);\
+                                                 RCC->DCKCFGR1 |= (__PRESC__);           \
+                                                }while(0)
+
+/** @brief Macros to Enable or Disable the PLLISAI. 
+  * @note  The PLLSAI is disabled by hardware when entering STOP and STANDBY modes. 
+  */
+#define __HAL_RCC_PLLSAI_ENABLE() (RCC->CR |= (RCC_CR_PLLSAION))
+#define __HAL_RCC_PLLSAI_DISABLE() (RCC->CR &= ~(RCC_CR_PLLSAION))
+
+/** @brief  Macro to configure the PLLSAI clock multiplication and division factors.
+  * @note   This function must be used only when the PLLSAI is disabled.
+  * @note   PLLSAI clock source is common with the main PLL (configured in 
+  *         RCC_PLLConfig function )
+  * @param  __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+  *         This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+  * @note   You have to set the PLLSAIN parameter correctly to ensure that the VCO 
+  *         output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+  * @param  __PLLSAIP__: specifies the division factor for USB, RNG, SDMMC clocks
+  *         This parameter can be a value of @ref RCCEx_PLLSAIP_Clock_Divider.                                                  
+  * @param  __PLLSAIQ__: specifies the division factor for SAI clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+  * @param  __PLLSAIR__: specifies the division factor for LTDC clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+  */   
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__)                        \
+                               (RCC->PLLSAICFGR = ((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) |\
+                               ((__PLLSAIP__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP))                    |\
+                               ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ))                    |\
+                               ((__PLLSAIR__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR)))
+
+/** @brief  Macro to configure the PLLI2S clock multiplication and division factors.
+  * @note   This macro must be used only when the PLLI2S is disabled.
+  * @note   PLLI2S clock source is common with the main PLL (configured in 
+  *         HAL_RCC_ClockConfig() API)             
+  * @param  __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock.
+  *         This parameter must be a number between Min_Data = 50 and Max_Data = 432.
+  * @note   You have to set the PLLI2SN parameter correctly to ensure that the VCO 
+  *         output frequency is between Min_Data = 100 and Max_Data = 432 MHz.
+  * @param  __PLLI2SP__: specifies the division factor for SPDDIF-RX clock.
+  *         This parameter can be a value of @ref RCCEx_PLLI2SP_Clock_Divider.                                 
+  * @param  __PLLI2SQ__: specifies the division factor for SAI clock.
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 15. 
+  * @param  __PLLI2SR__: specifies the division factor for I2S clock
+  *         This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+  * @note   You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+  *         on the I2S clock frequency. 
+  */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__)                        \
+                               (RCC->PLLI2SCFGR = ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+                               ((__PLLI2SP__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP))                    |\
+                               ((__PLLI2SQ__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ))                    |\
+                               ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR)))
+    
+/** @brief  Macro to configure the SAI clock Divider coming from PLLI2S.
+  * @note   This function must be called before enabling the PLLI2S.          
+  * @param  __PLLI2SDivQ__: specifies the PLLI2S division factor for SAI1 clock .
+  *          This parameter must be a number between 1 and 32.
+  *          SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__ 
+  */
+#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLI2SDIVQ, (__PLLI2SDivQ__)-1))
+
+/** @brief  Macro to configure the SAI clock Divider coming from PLLSAI.
+  * @note   This function must be called before enabling the PLLSAI.
+  * @param  __PLLSAIDivQ__: specifies the PLLSAI division factor for SAI1 clock .
+  *         This parameter must be a number between Min_Data = 1 and Max_Data = 32.
+  *         SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__  
+  */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8))
+
+/** @brief  Macro to configure the LTDC clock Divider coming from PLLSAI.
+  * 
+  * @note   This function must be called before enabling the PLLSAI. 
+  * @param  __PLLSAIDivR__: specifies the PLLSAI division factor for LTDC clock .
+  *          This parameter can be a value of @ref RCCEx_PLLSAI_DIVR.
+  *          LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__ 
+  */   
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__)\
+                            MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_PLLSAIDIVR, (uint32_t)(__PLLSAIDivR__))
+
+/** @brief  Macro to configure SAI1 clock source selection.
+  * @note   This function must be called before enabling PLLSAI, PLLI2S and  
+  *         the SAI clock.
+  * @param  __SOURCE__: specifies the SAI1 clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used 
+  *                                           as SAI1 clock. 
+  *            @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used 
+  *                                           as SAI1 clock.
+  *            @arg RCC_SAI1CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
+  *                                        used as SAI1 clock.
+  */
+#define __HAL_RCC_SAI1_CONFIG(__SOURCE__)\
+                             MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI1SEL, (uint32_t)(__SOURCE__))
+
+/** @brief  Macro to get the SAI1 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used 
+  *                                           as SAI1 clock. 
+  *            @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used 
+  *                                           as SAI1 clock.
+  *            @arg RCC_SAI1CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
+  *                                        used as SAI1 clock.
+  */
+#define __HAL_RCC_GET_SAI1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI1SEL)))
+
+
+/** @brief  Macro to configure SAI2 clock source selection.
+  * @note   This function must be called before enabling PLLSAI, PLLI2S and  
+  *         the SAI clock.
+  * @param  __SOURCE__: specifies the SAI2 clock source.
+  *         This parameter can be one of the following values:
+  *            @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used 
+  *                                           as SAI2 clock. 
+  *            @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used 
+  *                                           as SAI2 clock. 
+  *            @arg RCC_SAI2CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
+  *                                        used as SAI2 clock.
+  */
+#define __HAL_RCC_SAI2_CONFIG(__SOURCE__)\
+                            MODIFY_REG(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI2SEL, (uint32_t)(__SOURCE__))
+
+
+/** @brief  Macro to get the SAI2 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used 
+  *                                           as SAI2 clock. 
+  *            @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used 
+  *                                           as SAI2 clock.
+  *            @arg RCC_SAI2CLKSOURCE_PIN: External clock mapped on the I2S_CKIN pin
+  *                                        used as SAI2 clock.
+  */
+#define __HAL_RCC_GET_SAI2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR1, RCC_DCKCFGR1_SAI2SEL)))
+
+
+/** @brief Enable PLLSAI_RDY interrupt.
+  */
+#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Disable PLLSAI_RDY interrupt.
+  */
+#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Clear the PLLSAI RDY interrupt pending bits.
+  */
+#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF))
+
+/** @brief Check the PLLSAI RDY interrupt has occurred or not.
+  * @retval The new state (TRUE or FALSE).
+  */
+#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief  Check PLLSAI RDY flag is set or not.
+  * @retval The new state (TRUE or FALSE).
+  */
+#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY))
+
+/** @brief  Macro to Get I2S clock source selection.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. 
+  *            @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as I2S clock source
+  */
+#define __HAL_RCC_GET_I2SCLKSOURCE() (READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC))
+
+/** @brief  Macro to configure the I2C1 clock (I2C1CLK).
+  *
+  * @param  __I2C1_CLKSOURCE__: specifies the I2C1 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_I2C1CLKSOURCE_PCLK1: PCLK1 selected as I2C1 clock
+  *            @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+  *            @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+  */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C1SEL, (uint32_t)(__I2C1_CLKSOURCE__))
+
+/** @brief  Macro to get the I2C1 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_I2C1CLKSOURCE_PCLK1: PCLK1 selected as I2C1 clock
+  *            @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+  *            @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+  */
+#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C1SEL)))
+
+/** @brief  Macro to configure the I2C2 clock (I2C2CLK).
+  *
+  * @param  __I2C2_CLKSOURCE__: specifies the I2C2 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_I2C2CLKSOURCE_PCLK1: PCLK1 selected as I2C2 clock
+  *            @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+  *            @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+  */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C2SEL, (uint32_t)(__I2C2_CLKSOURCE__))
+
+/** @brief  Macro to get the I2C2 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_I2C2CLKSOURCE_PCLK1: PCLK1 selected as I2C2 clock
+  *            @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+  *            @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+  */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C2SEL)))
+
+/** @brief  Macro to configure the I2C3 clock (I2C3CLK).
+  *
+  * @param  __I2C3_CLKSOURCE__: specifies the I2C3 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_I2C3CLKSOURCE_PCLK1: PCLK1 selected as I2C3 clock
+  *            @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+  *            @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+  */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C3SEL, (uint32_t)(__I2C3_CLKSOURCE__))
+
+/** @brief  macro to get the I2C3 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_I2C3CLKSOURCE_PCLK1: PCLK1 selected as I2C3 clock
+  *            @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+  *            @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+  */
+#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C3SEL)))
+
+/** @brief  Macro to configure the I2C4 clock (I2C4CLK).
+  *
+  * @param  __I2C4_CLKSOURCE__: specifies the I2C4 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_I2C4CLKSOURCE_PCLK1: PCLK1 selected as I2C4 clock
+  *            @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock
+  *            @arg RCC_I2C4CLKSOURCE_SYSCLK: System Clock selected as I2C4 clock
+  */
+#define __HAL_RCC_I2C4_CONFIG(__I2C4_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C4SEL, (uint32_t)(__I2C4_CLKSOURCE__))
+
+/** @brief  macro to get the I2C4 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_I2C4CLKSOURCE_PCLK1: PCLK1 selected as I2C4 clock
+  *            @arg RCC_I2C4CLKSOURCE_HSI: HSI selected as I2C4 clock
+  *            @arg RCC_I2C4CLKSOURCE_SYSCLK: System Clock selected as I2C4 clock
+  */
+#define __HAL_RCC_GET_I2C4_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_I2C4SEL)))
+
+/** @brief  Macro to configure the USART1 clock (USART1CLK).
+  *
+  * @param  __USART1_CLKSOURCE__: specifies the USART1 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_USART1CLKSOURCE_PCLK2: PCLK2 selected as USART1 clock
+  *            @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+  *            @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+  *            @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+  */
+#define __HAL_RCC_USART1_CONFIG(__USART1_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART1SEL, (uint32_t)(__USART1_CLKSOURCE__))
+
+/** @brief  macro to get the USART1 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_USART1CLKSOURCE_PCLK2: PCLK2 selected as USART1 clock
+  *            @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+  *            @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+  *            @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+  */
+#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART1SEL)))
+
+/** @brief  Macro to configure the USART2 clock (USART2CLK).
+  *
+  * @param  __USART2_CLKSOURCE__: specifies the USART2 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+  *            @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+  *            @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+  *            @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+  */
+#define __HAL_RCC_USART2_CONFIG(__USART2_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART2SEL, (uint32_t)(__USART2_CLKSOURCE__))
+
+/** @brief  macro to get the USART2 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+  *            @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+  *            @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+  *            @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+  */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART2SEL)))
+
+/** @brief  Macro to configure the USART3 clock (USART3CLK).
+  *
+  * @param  __USART3_CLKSOURCE__: specifies the USART3 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+  *            @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+  *            @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+  *            @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+  */
+#define __HAL_RCC_USART3_CONFIG(__USART3_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART3SEL, (uint32_t)(__USART3_CLKSOURCE__))
+
+/** @brief  macro to get the USART3 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+  *            @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+  *            @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+  *            @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+  */
+#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART3SEL)))
+
+ /** @brief  Macro to configure the UART4 clock (UART4CLK).
+  *
+  * @param  __UART4_CLKSOURCE__: specifies the UART4 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
+  *            @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
+  *            @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
+  *            @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
+  */
+#define __HAL_RCC_UART4_CONFIG(__UART4_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART4SEL, (uint32_t)(__UART4_CLKSOURCE__))
+
+/** @brief  macro to get the UART4 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
+  *            @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
+  *            @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
+  *            @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
+  */
+#define __HAL_RCC_GET_UART4_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART4SEL)))
+
+ /** @brief  Macro to configure the UART5 clock (UART5CLK).
+  *
+  * @param  __UART5_CLKSOURCE__: specifies the UART5 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
+  *            @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
+  *            @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
+  *            @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
+  */
+#define __HAL_RCC_UART5_CONFIG(__UART5_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART5SEL, (uint32_t)(__UART5_CLKSOURCE__))
+
+/** @brief  macro to get the UART5 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
+  *            @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
+  *            @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
+  *            @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
+  */
+#define __HAL_RCC_GET_UART5_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART5SEL)))
+
+ /** @brief  Macro to configure the USART6 clock (USART6CLK).
+  *
+  * @param  __USART6_CLKSOURCE__: specifies the USART6 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_USART6CLKSOURCE_PCLK1: PCLK1 selected as USART6 clock
+  *            @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock
+  *            @arg RCC_USART6CLKSOURCE_SYSCLK: System Clock selected as USART6 clock
+  *            @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock
+  */
+#define __HAL_RCC_USART6_CONFIG(__USART6_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_USART6SEL, (uint32_t)(__USART6_CLKSOURCE__))
+
+/** @brief  macro to get the USART6 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_USART6CLKSOURCE_PCLK1: PCLK1 selected as USART6 clock
+  *            @arg RCC_USART6CLKSOURCE_HSI: HSI selected as USART6 clock
+  *            @arg RCC_USART6CLKSOURCE_SYSCLK: System Clock selected as USART6 clock
+  *            @arg RCC_USART6CLKSOURCE_LSE: LSE selected as USART6 clock
+  */
+#define __HAL_RCC_GET_USART6_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_USART6SEL)))
+
+ /** @brief  Macro to configure the UART7 clock (UART7CLK).
+  *
+  * @param  __UART7_CLKSOURCE__: specifies the UART7 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_UART7CLKSOURCE_PCLK1: PCLK1 selected as UART7 clock
+  *            @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock
+  *            @arg RCC_UART7CLKSOURCE_SYSCLK: System Clock selected as UART7 clock
+  *            @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock
+  */
+#define __HAL_RCC_UART7_CONFIG(__UART7_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART7SEL, (uint32_t)(__UART7_CLKSOURCE__))
+
+/** @brief  macro to get the UART7 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_UART7CLKSOURCE_PCLK1: PCLK1 selected as UART7 clock
+  *            @arg RCC_UART7CLKSOURCE_HSI: HSI selected as UART7 clock
+  *            @arg RCC_UART7CLKSOURCE_SYSCLK: System Clock selected as UART7 clock
+  *            @arg RCC_UART7CLKSOURCE_LSE: LSE selected as UART7 clock
+  */
+#define __HAL_RCC_GET_UART7_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART7SEL)))
+
+/** @brief  Macro to configure the UART8 clock (UART8CLK).
+  *
+  * @param  __UART8_CLKSOURCE__: specifies the UART8 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_UART8CLKSOURCE_PCLK1: PCLK1 selected as UART8 clock
+  *            @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock
+  *            @arg RCC_UART8CLKSOURCE_SYSCLK: System Clock selected as UART8 clock
+  *            @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock
+  */
+#define __HAL_RCC_UART8_CONFIG(__UART8_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_UART8SEL, (uint32_t)(__UART8_CLKSOURCE__))
+
+/** @brief  macro to get the UART8 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_UART8CLKSOURCE_PCLK1: PCLK1 selected as UART8 clock
+  *            @arg RCC_UART8CLKSOURCE_HSI: HSI selected as UART8 clock
+  *            @arg RCC_UART8CLKSOURCE_SYSCLK: System Clock selected as UART8 clock
+  *            @arg RCC_UART8CLKSOURCE_LSE: LSE selected as UART8 clock
+  */
+#define __HAL_RCC_GET_UART8_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_UART8SEL)))
+
+/** @brief  Macro to configure the LPTIM1 clock (LPTIM1CLK).
+  *
+  * @param  __LPTIM1_CLKSOURCE__: specifies the LPTIM1 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_LPTIM1CLKSOURCE_PCLK: PCLK selected as LPTIM1 clock
+  *            @arg RCC_LPTIM1CLKSOURCE_HSI: HSI selected as LPTIM1 clock
+  *            @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
+  *            @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
+  */
+#define __HAL_RCC_LPTIM1_CONFIG(__LPTIM1_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL, (uint32_t)(__LPTIM1_CLKSOURCE__))
+
+/** @brief  macro to get the LPTIM1 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_LPTIM1CLKSOURCE_PCLK: PCLK selected as LPTIM1 clock
+  *            @arg RCC_LPTIM1CLKSOURCE_HSI: HSI selected as LPTIM1 clock
+  *            @arg RCC_LPTIM1CLKSOURCE_LSI: LSI selected as LPTIM1 clock
+  *            @arg RCC_LPTIM1CLKSOURCE_LSE: LSE selected as LPTIM1 clock
+  */
+#define __HAL_RCC_GET_LPTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_LPTIM1SEL)))
+
+/** @brief  Macro to configure the CEC clock (CECCLK).
+  *
+  * @param  __CEC_CLKSOURCE__: specifies the CEC clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+  *            @arg RCC_CECCLKSOURCE_HSI: HSI divided by 488 selected as CEC clock
+  */
+#define __HAL_RCC_CEC_CONFIG(__CEC_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__CEC_CLKSOURCE__))
+
+/** @brief  macro to get the CEC clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+  *            @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+  */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL)))
+
+/** @brief  Macro to configure the CLK48 source (CLK48CLK).
+  *
+  * @param  __CLK48_SOURCE__: specifies the CLK48 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_CLK48SOURCE_PLL: PLL selected as CLK48 source
+  *            @arg RCC_CLK48SOURCE_PLLSAIP: PLLSAIP selected as CLK48 source
+  */
+#define __HAL_RCC_CLK48_CONFIG(__CLK48_SOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__CLK48_SOURCE__))
+
+/** @brief  macro to get the CLK48 source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_CLK48SOURCE_PLL: PLL used as CLK48 source
+  *            @arg RCC_CLK48SOURCE_PLLSAIP: PLLSAIP used as CLK48 source
+  */
+#define __HAL_RCC_GET_CLK48_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)))
+
+/** @brief  Macro to configure the SDMMC1 clock (SDMMC1CLK).
+  *
+  * @param  __SDMMC1_CLKSOURCE__: specifies the SDMMC1 clock source.
+  *          This parameter can be one of the following values:
+  *            @arg RCC_SDMMC1CLKSOURCE_CLK48: CLK48 selected as SDMMC clock
+  *            @arg RCC_SDMMC1CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC clock
+  */
+#define __HAL_RCC_SDMMC1_CONFIG(__SDMMC1_CLKSOURCE__) \
+                  MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC1SEL, (uint32_t)(__SDMMC1_CLKSOURCE__))
+
+/** @brief  macro to get the SDMMC1 clock source.
+  * @retval The clock source can be one of the following values:
+  *            @arg RCC_SDMMC1CLKSOURCE_CLK48: CLK48 selected as SDMMC1 clock
+  *            @arg RCC_SDMMC1CLKSOURCE_SYSCLK: SYSCLK selected as SDMMC1 clock
+  */
+#define __HAL_RCC_GET_SDMMC1_SOURCE() ((uint32_t)(READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDMMC1SEL)))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit);
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+
+/**
+  * @}
+  */ 
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCCEx_Private_Macros RCCEx Private Macros
+  * @{
+  */
+/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters
+  * @{
+  */
+#if defined(STM32F756xx) || defined(STM32F746xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION)  \
+               ((((SELECTION) & RCC_PERIPHCLK_I2S)         == RCC_PERIPHCLK_I2S)     || \
+                (((SELECTION) & RCC_PERIPHCLK_LTDC)        == RCC_PERIPHCLK_LTDC)    || \
+                (((SELECTION) & RCC_PERIPHCLK_TIM)         == RCC_PERIPHCLK_TIM)     || \
+                (((SELECTION) & RCC_PERIPHCLK_USART1)      == RCC_PERIPHCLK_USART1)  || \
+                (((SELECTION) & RCC_PERIPHCLK_USART2)      == RCC_PERIPHCLK_USART2)  || \
+                (((SELECTION) & RCC_PERIPHCLK_USART3)      == RCC_PERIPHCLK_USART3)  || \
+                (((SELECTION) & RCC_PERIPHCLK_UART4)       == RCC_PERIPHCLK_UART4)   || \
+                (((SELECTION) & RCC_PERIPHCLK_UART5)       == RCC_PERIPHCLK_UART5)   || \
+                (((SELECTION) & RCC_PERIPHCLK_USART6)      == RCC_PERIPHCLK_USART6)  || \
+                (((SELECTION) & RCC_PERIPHCLK_UART7)       == RCC_PERIPHCLK_UART7)   || \
+                (((SELECTION) & RCC_PERIPHCLK_UART8)       == RCC_PERIPHCLK_UART8)   || \
+                (((SELECTION) & RCC_PERIPHCLK_I2C1)        == RCC_PERIPHCLK_I2C1)    || \
+                (((SELECTION) & RCC_PERIPHCLK_I2C2)        == RCC_PERIPHCLK_I2C2)    || \
+                (((SELECTION) & RCC_PERIPHCLK_I2C3)        == RCC_PERIPHCLK_I2C3)    || \
+                (((SELECTION) & RCC_PERIPHCLK_I2C4)        == RCC_PERIPHCLK_I2C4)    || \
+                (((SELECTION) & RCC_PERIPHCLK_LPTIM1)      == RCC_PERIPHCLK_LPTIM1)  || \
+                (((SELECTION) & RCC_PERIPHCLK_SAI1)        == RCC_PERIPHCLK_SAI1)    || \
+                (((SELECTION) & RCC_PERIPHCLK_SAI2)        == RCC_PERIPHCLK_SAI2)    || \
+                (((SELECTION) & RCC_PERIPHCLK_CLK48)       == RCC_PERIPHCLK_CLK48)   || \
+                (((SELECTION) & RCC_PERIPHCLK_CEC)         == RCC_PERIPHCLK_CEC)     || \
+                (((SELECTION) & RCC_PERIPHCLK_SDMMC1)      == RCC_PERIPHCLK_SDMMC1)  || \
+                (((SELECTION) & RCC_PERIPHCLK_SPDIFRX)     == RCC_PERIPHCLK_SPDIFRX) || \
+                (((SELECTION) & RCC_PERIPHCLK_RTC)         == RCC_PERIPHCLK_RTC))
+#elif defined(STM32F745xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION)  \
+               ((((SELECTION) & RCC_PERIPHCLK_I2S)         == RCC_PERIPHCLK_I2S)     || \
+                (((SELECTION) & RCC_PERIPHCLK_TIM)         == RCC_PERIPHCLK_TIM)     || \
+                (((SELECTION) & RCC_PERIPHCLK_USART1)      == RCC_PERIPHCLK_USART1)  || \
+                (((SELECTION) & RCC_PERIPHCLK_USART2)      == RCC_PERIPHCLK_USART2)  || \
+                (((SELECTION) & RCC_PERIPHCLK_USART3)      == RCC_PERIPHCLK_USART3)  || \
+                (((SELECTION) & RCC_PERIPHCLK_UART4)       == RCC_PERIPHCLK_UART4)   || \
+                (((SELECTION) & RCC_PERIPHCLK_UART5)       == RCC_PERIPHCLK_UART5)   || \
+                (((SELECTION) & RCC_PERIPHCLK_USART6)      == RCC_PERIPHCLK_USART6)  || \
+                (((SELECTION) & RCC_PERIPHCLK_UART7)       == RCC_PERIPHCLK_UART7)   || \
+                (((SELECTION) & RCC_PERIPHCLK_UART8)       == RCC_PERIPHCLK_UART8)   || \
+                (((SELECTION) & RCC_PERIPHCLK_I2C1)        == RCC_PERIPHCLK_I2C1)    || \
+                (((SELECTION) & RCC_PERIPHCLK_I2C2)        == RCC_PERIPHCLK_I2C2)    || \
+                (((SELECTION) & RCC_PERIPHCLK_I2C3)        == RCC_PERIPHCLK_I2C3)    || \
+                (((SELECTION) & RCC_PERIPHCLK_I2C4)        == RCC_PERIPHCLK_I2C4)    || \
+                (((SELECTION) & RCC_PERIPHCLK_LPTIM1)      == RCC_PERIPHCLK_LPTIM1)  || \
+                (((SELECTION) & RCC_PERIPHCLK_SAI1)        == RCC_PERIPHCLK_SAI1)    || \
+                (((SELECTION) & RCC_PERIPHCLK_SAI2)        == RCC_PERIPHCLK_SAI2)    || \
+                (((SELECTION) & RCC_PERIPHCLK_CLK48)       == RCC_PERIPHCLK_CLK48)   || \
+                (((SELECTION) & RCC_PERIPHCLK_CEC)         == RCC_PERIPHCLK_CEC)     || \
+                (((SELECTION) & RCC_PERIPHCLK_SDMMC1)      == RCC_PERIPHCLK_SDMMC1)  || \
+                (((SELECTION) & RCC_PERIPHCLK_SPDIFRX)     == RCC_PERIPHCLK_SPDIFRX) || \
+                (((SELECTION) & RCC_PERIPHCLK_RTC)         == RCC_PERIPHCLK_RTC))
+#endif /* STM32F746xx || STM32F756xx */
+#define IS_RCC_PLLI2SN_VALUE(VALUE) ((50 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\
+                                     ((VALUE) == RCC_PLLI2SP_DIV4) ||\
+                                     ((VALUE) == RCC_PLLI2SP_DIV6) ||\
+                                     ((VALUE) == RCC_PLLI2SP_DIV8))                 
+#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+#define IS_RCC_PLLSAIN_VALUE(VALUE) ((50 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\
+                                     ((VALUE) == RCC_PLLSAIP_DIV4) ||\
+                                     ((VALUE) == RCC_PLLSAIP_DIV6) ||\
+                                     ((VALUE) == RCC_PLLSAIP_DIV8))
+#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))  
+
+#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+
+#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+
+#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\
+                                         ((VALUE) == RCC_PLLSAIDIVR_4) ||\
+                                         ((VALUE) == RCC_PLLSAIDIVR_8) ||\
+                                         ((VALUE) == RCC_PLLSAIDIVR_16))
+#define IS_RCC_I2SCLKSOURCE(SOURCE)  (((SOURCE) == RCC_I2SCLKSOURCE_PLLI2S) || \
+                                      ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+
+#define IS_RCC_SDMMC1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SDMMC1CLKSOURCE_SYSCLK) || \
+                                        ((SOURCE) == RCC_SDMMC1CLKSOURCE_CLK48))
+
+#define IS_RCC_CECCLKSOURCE(SOURCE)  (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+                                      ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+#define IS_RCC_USART1CLKSOURCE(SOURCE)  \
+               (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2)  || \
+                ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+                ((SOURCE) == RCC_USART1CLKSOURCE_LSE)    || \
+                ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+
+#define IS_RCC_USART2CLKSOURCE(SOURCE)  \
+               (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1)  || \
+                ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \
+                ((SOURCE) == RCC_USART2CLKSOURCE_LSE)    || \
+                ((SOURCE) == RCC_USART2CLKSOURCE_HSI))
+#define IS_RCC_USART3CLKSOURCE(SOURCE)  \
+               (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1)  || \
+                ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \
+                ((SOURCE) == RCC_USART3CLKSOURCE_LSE)    || \
+                ((SOURCE) == RCC_USART3CLKSOURCE_HSI))
+
+#define IS_RCC_UART4CLKSOURCE(SOURCE)  \
+               (((SOURCE) == RCC_UART4CLKSOURCE_PCLK1)  || \
+                ((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \
+                ((SOURCE) == RCC_UART4CLKSOURCE_LSE)    || \
+                ((SOURCE) == RCC_UART4CLKSOURCE_HSI))
+
+#define IS_RCC_UART5CLKSOURCE(SOURCE)  \
+               (((SOURCE) == RCC_UART5CLKSOURCE_PCLK1)  || \
+                ((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \
+                ((SOURCE) == RCC_UART5CLKSOURCE_LSE)    || \
+                ((SOURCE) == RCC_UART5CLKSOURCE_HSI))
+
+#define IS_RCC_USART6CLKSOURCE(SOURCE)  \
+               (((SOURCE) == RCC_USART6CLKSOURCE_PCLK2)  || \
+                ((SOURCE) == RCC_USART6CLKSOURCE_SYSCLK) || \
+                ((SOURCE) == RCC_USART6CLKSOURCE_LSE)    || \
+                ((SOURCE) == RCC_USART6CLKSOURCE_HSI))
+
+#define IS_RCC_UART7CLKSOURCE(SOURCE)  \
+               (((SOURCE) == RCC_UART7CLKSOURCE_PCLK1)  || \
+                ((SOURCE) == RCC_UART7CLKSOURCE_SYSCLK) || \
+                ((SOURCE) == RCC_UART7CLKSOURCE_LSE)    || \
+                ((SOURCE) == RCC_UART7CLKSOURCE_HSI))
+
+#define IS_RCC_UART8CLKSOURCE(SOURCE)  \
+               (((SOURCE) == RCC_UART8CLKSOURCE_PCLK1)  || \
+                ((SOURCE) == RCC_UART8CLKSOURCE_SYSCLK) || \
+                ((SOURCE) == RCC_UART8CLKSOURCE_LSE)    || \
+                ((SOURCE) == RCC_UART8CLKSOURCE_HSI))
+#define IS_RCC_I2C1CLKSOURCE(SOURCE)   \
+               (((SOURCE) == RCC_I2C1CLKSOURCE_PCLK1) || \
+                ((SOURCE) == RCC_I2C1CLKSOURCE_SYSCLK)|| \
+                ((SOURCE) == RCC_I2C1CLKSOURCE_HSI))
+#define IS_RCC_I2C2CLKSOURCE(SOURCE)   \
+               (((SOURCE) == RCC_I2C2CLKSOURCE_PCLK1) || \
+                ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK)|| \
+                ((SOURCE) == RCC_I2C2CLKSOURCE_HSI))
+
+#define IS_RCC_I2C3CLKSOURCE(SOURCE)   \
+               (((SOURCE) == RCC_I2C3CLKSOURCE_PCLK1) || \
+                ((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK)|| \
+                ((SOURCE) == RCC_I2C3CLKSOURCE_HSI))
+#define IS_RCC_I2C4CLKSOURCE(SOURCE)   \
+               (((SOURCE) == RCC_I2C4CLKSOURCE_PCLK1) || \
+                ((SOURCE) == RCC_I2C4CLKSOURCE_SYSCLK)|| \
+                ((SOURCE) == RCC_I2C4CLKSOURCE_HSI))
+#define IS_RCC_LPTIM1CLK(SOURCE)  \
+               (((SOURCE) == RCC_LPTIM1CLKSOURCE_PCLK) || \
+                ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSI)  || \
+                ((SOURCE) == RCC_LPTIM1CLKSOURCE_HSI)  || \
+                ((SOURCE) == RCC_LPTIM1CLKSOURCE_LSE))
+#define IS_RCC_CLK48SOURCE(SOURCE)  \
+               (((SOURCE) == RCC_CLK48SOURCE_PLLSAIP) || \
+                ((SOURCE) == RCC_CLK48SOURCE_PLL))
+#define IS_RCC_TIMPRES(VALUE)  \
+               (((VALUE) == RCC_TIMPRES_DESACTIVATED) || \
+                ((VALUE) == RCC_TIMPRES_ACTIVATED))
+
+#if defined (STM32F745xx) || defined (STM32F746xx) || defined (STM32F756xx)
+#define IS_RCC_SAI1CLKSOURCE(SOURCE)  (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) || \
+                                       ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) || \
+                                       ((SOURCE) == RCC_SAI1CLKSOURCE_PIN))
+#define IS_RCC_SAI2CLKSOURCE(SOURCE)  (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) || \
+                                       ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) || \
+                                       ((SOURCE) == RCC_SAI2CLKSOURCE_PIN))
+#endif /* STM32F745xx || STM32F746xx || STM32F756xx */
+                 
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */  
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_rng.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,522 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_rng.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   RNG HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Random Number Generator (RNG) peripheral:
+  *           + Initialization/de-initialization functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State functions
+  *         
+  @verbatim
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+      The RNG HAL driver can be used as follows:
+
+      (#) Enable the RNG controller clock using __HAL_RCC_RNG_CLK_ENABLE() macro 
+          in HAL_RNG_MspInit().
+      (#) Activate the RNG peripheral using HAL_RNG_Init() function.
+      (#) Wait until the 32 bit Random Number Generator contains a valid 
+          random data using (polling/interrupt) mode.   
+      (#) Get the 32 bit random number using HAL_RNG_GenerateRandomNumber() function.
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RNG 
+  * @{
+  */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+
+/* Private types -------------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @addtogroup RNG_Private_Constants
+  * @{
+  */
+#define RNG_TIMEOUT_VALUE     2
+/**
+  * @}
+  */ 
+/* Private macros ------------------------------------------------------------*/
+/* Private functions prototypes ----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup RNG_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup RNG_Exported_Functions_Group1
+ *  @brief   Initialization and de-initialization functions
+ *
+@verbatim
+ ===============================================================================
+          ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+      (+) Initialize the RNG according to the specified parameters 
+          in the RNG_InitTypeDef and create the associated handle
+      (+) DeInitialize the RNG peripheral
+      (+) Initialize the RNG MSP
+      (+) DeInitialize RNG MSP 
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Initializes the RNG peripheral and creates the associated handle.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng)
+{ 
+  /* Check the RNG handle allocation */
+  if(hrng == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  __HAL_LOCK(hrng);
+  
+  if(hrng->State == HAL_RNG_STATE_RESET)
+  {  
+    /* Allocate lock resource and initialize it */
+    hrng->Lock = HAL_UNLOCKED;
+
+    /* Init the low level hardware */
+    HAL_RNG_MspInit(hrng);
+  }
+  
+  /* Change RNG peripheral state */
+  hrng->State = HAL_RNG_STATE_BUSY;
+
+  /* Enable the RNG Peripheral */
+  __HAL_RNG_ENABLE(hrng);
+
+  /* Initialize the RNG state */
+  hrng->State = HAL_RNG_STATE_READY;
+  
+  __HAL_UNLOCK(hrng);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the RNG peripheral. 
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng)
+{ 
+  /* Check the RNG handle allocation */
+  if(hrng == NULL)
+  {
+    return HAL_ERROR;
+  }
+  /* Disable the RNG Peripheral */
+  CLEAR_BIT(hrng->Instance->CR, RNG_CR_IE | RNG_CR_RNGEN);
+  
+  /* Clear RNG interrupt status flags */
+  CLEAR_BIT(hrng->Instance->SR, RNG_SR_CEIS | RNG_SR_SEIS);
+  
+  /* DeInit the low level hardware */
+  HAL_RNG_MspDeInit(hrng);
+  
+  /* Update the RNG state */
+  hrng->State = HAL_RNG_STATE_RESET; 
+
+  /* Release Lock */
+  __HAL_UNLOCK(hrng);
+  
+  /* Return the function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the RNG MSP.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval None
+  */
+__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrng);
+  
+  /* NOTE : This function should not be modified. When the callback is needed,
+            function HAL_RNG_MspInit must be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  DeInitializes the RNG MSP.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval None
+  */
+__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrng);
+  
+  /* NOTE : This function should not be modified. When the callback is needed,
+            function HAL_RNG_MspDeInit must be implemented in the user file.
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup RNG_Exported_Functions_Group2
+ *  @brief   Peripheral Control functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) Get the 32 bit Random number
+      (+) Get the 32 bit Random number with interrupt enabled
+      (+) Handle RNG interrupt request 
+
+@endverbatim
+  * @{
+  */
+   
+/**
+  * @brief  Generates a 32-bit random number.
+  * @note   Each time the random number data is read the RNG_FLAG_DRDY flag 
+  *         is automatically cleared.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @param  random32bit: pointer to generated random number variable if successful.
+  * @retval HAL status
+  */
+
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit)
+{
+  uint32_t tickstart = 0;    
+  HAL_StatusTypeDef status = HAL_OK;
+
+  /* Process Locked */
+  __HAL_LOCK(hrng); 
+  
+  /* Check RNG peripheral state */
+  if(hrng->State == HAL_RNG_STATE_READY)
+  {
+    /* Change RNG peripheral state */  
+    hrng->State = HAL_RNG_STATE_BUSY;  
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+  
+    /* Check if data register contains valid random data */
+    while(__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RNG_TIMEOUT_VALUE)
+      {    
+        hrng->State = HAL_RNG_STATE_ERROR;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hrng);
+      
+        return HAL_TIMEOUT;
+      } 
+    }
+  
+    /* Get a 32bit Random number */
+    hrng->RandomNumber = hrng->Instance->DR;
+    *random32bit = hrng->RandomNumber;
+  
+    hrng->State = HAL_RNG_STATE_READY;
+  }
+  else
+  {
+    status = HAL_ERROR;
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrng);
+  
+  return status;
+}
+
+/**
+  * @brief  Generates a 32-bit random number in interrupt mode.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Process Locked */
+  __HAL_LOCK(hrng);
+  
+  /* Check RNG peripheral state */
+  if(hrng->State == HAL_RNG_STATE_READY)
+  {
+    /* Change RNG peripheral state */  
+    hrng->State = HAL_RNG_STATE_BUSY;  
+  
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrng);
+    
+    /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ 
+    __HAL_RNG_ENABLE_IT(hrng);
+  }
+  else
+  {
+    /* Process Unlocked */
+    __HAL_UNLOCK(hrng);
+    
+    status = HAL_ERROR;
+  }
+  
+  return status;
+}
+
+/**
+  * @brief  Handles RNG interrupt request.
+  * @note   In the case of a clock error, the RNG is no more able to generate 
+  *         random numbers because the PLL48CLK clock is not correct. User has 
+  *         to check that the clock controller is correctly configured to provide
+  *         the RNG clock and clear the CEIS bit using __HAL_RNG_CLEAR_IT(). 
+  *         The clock error has no impact on the previously generated 
+  *         random numbers, and the RNG_DR register contents can be used.
+  * @note   In the case of a seed error, the generation of random numbers is 
+  *         interrupted as long as the SECS bit is '1'. If a number is 
+  *         available in the RNG_DR register, it must not be used because it may 
+  *         not have enough entropy. In this case, it is recommended to clear the 
+  *         SEIS bit using __HAL_RNG_CLEAR_IT(), then disable and enable 
+  *         the RNG peripheral to reinitialize and restart the RNG.
+  * @note   User-written HAL_RNG_ErrorCallback() API is called once whether SEIS
+  *         or CEIS are set.  
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval None
+
+  */
+void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng)
+{
+  /* RNG clock error interrupt occurred */
+  if((__HAL_RNG_GET_IT(hrng, RNG_IT_CEI) != RESET) ||  (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET))
+  { 
+    /* Change RNG peripheral state */
+    hrng->State = HAL_RNG_STATE_ERROR;
+  
+    HAL_RNG_ErrorCallback(hrng);
+    
+    /* Clear the clock error flag */
+    __HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI|RNG_IT_SEI);
+    
+  }
+  
+  /* Check RNG data ready interrupt occurred */    
+  if(__HAL_RNG_GET_IT(hrng, RNG_IT_DRDY) != RESET)
+  {
+    /* Generate random number once, so disable the IT */
+    __HAL_RNG_DISABLE_IT(hrng);
+    
+    /* Get the 32bit Random number (DRDY flag automatically cleared) */ 
+    hrng->RandomNumber = hrng->Instance->DR;
+    
+    if(hrng->State != HAL_RNG_STATE_ERROR)
+    {
+      /* Change RNG peripheral state */
+      hrng->State = HAL_RNG_STATE_READY; 
+      
+      /* Data Ready callback */ 
+      HAL_RNG_ReadyDataCallback(hrng, hrng->RandomNumber);
+    } 
+  }
+} 
+
+/**
+  * @brief  Returns generated random number in polling mode (Obsolete)
+  *         Use HAL_RNG_GenerateRandomNumber() API instead.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval Random value
+  */
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng)
+{
+  if(HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK)
+  {
+    return hrng->RandomNumber; 
+  }
+  else
+  {
+    return 0;
+  }
+}
+
+/**
+  * @brief  Returns a 32-bit random number with interrupt enabled (Obsolete),
+  *         Use HAL_RNG_GenerateRandomNumber_IT() API instead.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval 32-bit random number
+  */
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng)
+{
+  uint32_t random32bit = 0;
+  
+  /* Process locked */
+  __HAL_LOCK(hrng);
+  
+  /* Change RNG peripheral state */  
+  hrng->State = HAL_RNG_STATE_BUSY;  
+  
+  /* Get a 32bit Random number */ 
+  random32bit = hrng->Instance->DR;
+  
+  /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */ 
+  __HAL_RNG_ENABLE_IT(hrng); 
+  
+  /* Return the 32 bit random number */   
+  return random32bit;
+}
+
+/**
+  * @brief  Read latest generated random number. 
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval random value
+  */
+uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng)
+{
+  return(hrng->RandomNumber);
+}
+
+/**
+  * @brief  Data Ready callback in non-blocking mode. 
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @param  random32bit: generated random number.
+  * @retval None
+  */
+__weak void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrng);
+  
+  /* NOTE : This function should not be modified. When the callback is needed,
+            function HAL_RNG_ReadyDataCallback must be implemented in the user file.
+   */
+}
+
+/**
+  * @brief  RNG error callbacks.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval None
+  */
+__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrng);
+  
+  /* NOTE : This function should not be modified. When the callback is needed,
+            function HAL_RNG_ErrorCallback must be implemented in the user file.
+   */
+}
+/**
+  * @}
+  */ 
+
+  
+/** @addtogroup RNG_Exported_Functions_Group3
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral State functions #####
+ ===============================================================================  
+    [..]
+    This subsection permits to get in run-time the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Returns the RNG state.
+  * @param  hrng: pointer to a RNG_HandleTypeDef structure that contains
+  *                the configuration information for RNG.
+  * @retval HAL state
+  */
+HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng)
+{
+  return hrng->State;
+}
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_rng.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,358 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_rng.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of RNG HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_RNG_H
+#define __STM32F7xx_HAL_RNG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RNG RNG
+  * @brief RNG HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** @defgroup RNG_Exported_Types RNG Exported Types
+  * @{
+  */
+
+/** @defgroup RNG_Exported_Types_Group1 RNG State Structure definition 
+  * @{
+  */
+typedef enum
+{
+  HAL_RNG_STATE_RESET     = 0x00,  /*!< RNG not yet initialized or disabled */
+  HAL_RNG_STATE_READY     = 0x01,  /*!< RNG initialized and ready for use   */
+  HAL_RNG_STATE_BUSY      = 0x02,  /*!< RNG internal process is ongoing     */ 
+  HAL_RNG_STATE_TIMEOUT   = 0x03,  /*!< RNG timeout state                   */
+  HAL_RNG_STATE_ERROR     = 0x04   /*!< RNG error state                     */
+    
+}HAL_RNG_StateTypeDef;
+
+/** 
+  * @}
+  */
+
+/** @defgroup RNG_Exported_Types_Group2 RNG Handle Structure definition   
+  * @{
+  */ 
+typedef struct
+{
+  RNG_TypeDef                 *Instance;    /*!< Register base address   */
+
+  uint32_t                    RandomNumber; /*!< Last Generated random number */	
+  
+  HAL_LockTypeDef             Lock;         /*!< RNG locking object      */
+  
+  __IO HAL_RNG_StateTypeDef   State;        /*!< RNG communication state */
+  
+}RNG_HandleTypeDef;
+
+/** 
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+   
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Constants RNG Exported Constants
+  * @{
+  */
+
+/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition
+  * @{
+  */
+#define RNG_IT_DRDY  RNG_SR_DRDY  /*!< Data Ready interrupt  */
+#define RNG_IT_CEI   RNG_SR_CEIS  /*!< Clock error interrupt */
+#define RNG_IT_SEI   RNG_SR_SEIS  /*!< Seed error interrupt  */
+/**
+  * @}
+  */
+
+/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition
+  * @{
+  */
+#define RNG_FLAG_DRDY   RNG_SR_DRDY  /*!< Data ready                 */
+#define RNG_FLAG_CECS   RNG_SR_CECS  /*!< Clock error current status */
+#define RNG_FLAG_SECS   RNG_SR_SECS  /*!< Seed error current status  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Macros RNG Exported Macros
+  * @{
+  */
+
+/** @brief Reset RNG handle state
+  * @param  __HANDLE__: RNG Handle
+  * @retval None
+  */
+#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
+
+/**
+  * @brief  Enables the RNG peripheral.
+  * @param  __HANDLE__: RNG Handle
+  * @retval None
+  */
+#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |=  RNG_CR_RNGEN)
+
+/**
+  * @brief  Disables the RNG peripheral.
+  * @param  __HANDLE__: RNG Handle
+  * @retval None
+  */
+#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN)
+
+/**
+  * @brief  Check the selected RNG flag status.
+  * @param  __HANDLE__: RNG Handle
+  * @param  __FLAG__: RNG flag
+  *          This parameter can be one of the following values:
+  *            @arg RNG_FLAG_DRDY: Data ready                
+  *            @arg RNG_FLAG_CECS: Clock error current status
+  *            @arg RNG_FLAG_SECS: Seed error current status 
+  * @retval The new state of __FLAG__ (SET or RESET).
+  */
+#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clears the selected RNG flag status.
+  * @param  __HANDLE__: RNG handle
+  * @param  __FLAG__: RNG flag to clear  
+  * @note   WARNING: This is a dummy macro for HAL code alignment,
+  *         flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only.
+  * @retval None
+  */
+#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__)                      /* dummy  macro */
+
+
+
+/**
+  * @brief  Enables the RNG interrupts.
+  * @param  __HANDLE__: RNG Handle
+  * @retval None
+  */
+#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |=  RNG_CR_IE)
+    
+/**
+  * @brief  Disables the RNG interrupts.
+  * @param  __HANDLE__: RNG Handle
+  * @retval None
+  */
+#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE)
+
+/**
+  * @brief  Checks whether the specified RNG interrupt has occurred or not.
+  * @param  __HANDLE__: RNG Handle
+  * @param  __INTERRUPT__: specifies the RNG interrupt status flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg RNG_IT_DRDY: Data ready interrupt              
+  *            @arg RNG_IT_CEI: Clock error interrupt
+  *            @arg RNG_IT_SEI: Seed error interrupt
+  * @retval The new state of __INTERRUPT__ (SET or RESET).
+  */
+#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))   
+
+/**
+  * @brief  Clear the RNG interrupt status flags.
+  * @param  __HANDLE__: RNG Handle
+  * @param  __INTERRUPT__: specifies the RNG interrupt status flag to clear.
+  *          This parameter can be one of the following values:            
+  *            @arg RNG_IT_CEI: Clock error interrupt
+  *            @arg RNG_IT_SEI: Seed error interrupt
+  * @note   RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY.          
+  * @retval None
+  */
+#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__))
+
+/**
+  * @}
+  */ 
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RNG_Exported_Functions RNG Exported Functions
+  * @{
+  */
+
+/** @defgroup RNG_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */  
+HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng);
+HAL_StatusTypeDef HAL_RNG_DeInit (RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng);
+
+/**
+  * @}
+  */ 
+
+/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions
+  * @{
+  */
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng);    /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead    */
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */
+
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit);
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng);
+uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng);
+
+void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef* hrng, uint32_t random32bit);
+
+/**
+  * @}
+  */ 
+
+/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions
+  * @{
+  */
+HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng);
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */ 
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup RNG_Private_Types RNG Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup RNG_Private_Defines RNG Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+          
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Variables RNG Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Constants RNG Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RNG_Private_Macros RNG Private Macros
+  * @{
+  */
+#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \
+                       ((IT) == RNG_IT_SEI))
+
+#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
+                           ((FLAG) == RNG_FLAG_CECS) || \
+                           ((FLAG) == RNG_FLAG_SECS))
+
+/**
+  * @}
+  */ 
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup RNG_Private_Functions_Prototypes RNG Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Functions RNG Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_RNG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_rtc.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1564 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_rtc.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   RTC HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Real Time Clock (RTC) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + RTC Time and Date functions
+  *           + RTC Alarm functions
+  *           + Peripheral Control functions   
+  *           + Peripheral State functions
+  *         
+  @verbatim
+  ==============================================================================
+              ##### Backup Domain Operating Condition #####
+  ==============================================================================
+  [..] The real-time clock (RTC), the RTC backup registers, and the backup 
+       SRAM (BKP SRAM) can be powered from the VBAT voltage when the main 
+       VDD supply is powered off.
+       To retain the content of the RTC backup registers, backup SRAM, and supply 
+       the RTC when VDD is turned off, VBAT pin can be connected to an optional 
+       standby voltage supplied by a battery or by another source.
+
+  [..] To allow the RTC operating even when the main digital supply (VDD) is turned
+       off, the VBAT pin powers the following blocks:
+    (#) The RTC
+    (#) The LSE oscillator
+    (#) The backup SRAM when the low power backup regulator is enabled
+    (#) PC13 to PC15 I/Os, plus PI8 I/O (when available)
+  
+  [..] When the backup domain is supplied by VDD (analog switch connected to VDD),
+       the following pins are available:
+    (#) PC14 and PC15 can be used as either GPIO or LSE pins
+    (#) PC13 can be used as a GPIO or as the RTC_AF1 pin
+    (#) PI8 can be used as a GPIO or as the RTC_AF2 pin
+  
+  [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT 
+       because VDD is not present), the following pins are available:
+    (#) PC14 and PC15 can be used as LSE pins only
+    (#) PC13 can be used as the RTC_AF1 pin 
+    (#) PI8 can be used as the RTC_AF2 pin
+    (#) PC1 can be used as the RTC_AF3 pin
+             
+                   ##### Backup Domain Reset #####
+  ==================================================================
+  [..] The backup domain reset sets all RTC registers and the RCC_BDCR register 
+       to their reset values. The BKPSRAM is not affected by this reset. The only
+       way to reset the BKPSRAM is through the Flash interface by requesting 
+       a protection level change from 1 to 0.
+  [..] A backup domain reset is generated when one of the following events occurs:
+    (#) Software reset, triggered by setting the BDRST bit in the 
+        RCC Backup domain control register (RCC_BDCR). 
+    (#) VDD or VBAT power on, if both supplies have previously been powered off.  
+
+                   ##### Backup Domain Access #####
+  ==================================================================
+  [..] After reset, the backup domain (RTC registers, RTC backup data 
+       registers and backup SRAM) is protected against possible unwanted write 
+       accesses. 
+  [..] To enable access to the RTC Domain and RTC registers, proceed as follows:
+    (+) Enable the Power Controller (PWR) APB1 interface clock using the
+        __HAL_RCC_PWR_CLK_ENABLE() function.
+    (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
+    (+) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() function.
+    (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() function.
+  
+  
+                  ##### How to use this driver #####
+  ==================================================================
+  [..] 
+    (+) Enable the RTC domain access (see description in the section above).
+    (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour 
+        format using the HAL_RTC_Init() function.
+  
+  *** Time and Date configuration ***
+  ===================================
+  [..] 
+    (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime() 
+        and HAL_RTC_SetDate() functions.
+    (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions. 
+  
+  *** Alarm configuration ***
+  ===========================
+  [..]
+    (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function. 
+        You can also configure the RTC Alarm with interrupt mode using the HAL_RTC_SetAlarm_IT() function.
+    (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function.
+  
+                  ##### RTC and low power modes #####
+  ==================================================================
+  [..] The MCU can be woken up from a low power mode by an RTC alternate 
+       function.
+  [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B), 
+       RTC wakeup, RTC tamper event detection and RTC time stamp event detection.
+       These RTC alternate functions can wake up the system from the Stop and 
+       Standby low power modes.
+  [..] The system can also wake up from low power modes without depending 
+       on an external interrupt (Auto-wakeup mode), by using the RTC alarm 
+       or the RTC wakeup events.
+  [..] The RTC provides a programmable time base for waking up from the 
+       Stop or Standby mode at regular intervals.
+       Wakeup from STOP and STANDBY modes is possible only when the RTC clock source
+       is LSE or LSI.
+     
+   @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RTC RTC
+  * @brief RTC HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RTC_Exported_Functions RTC Exported Functions
+  * @{
+  */
+  
+/** @defgroup RTC_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+   [..] This section provides functions allowing to initialize and configure the 
+         RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable 
+         RTC registers Write protection, enter and exit the RTC initialization mode, 
+         RTC registers synchronization check and reference clock detection enable.
+         (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base. 
+             It is split into 2 programmable prescalers to minimize power consumption.
+             (++) A 7-bit asynchronous prescaler and a 13-bit synchronous prescaler.
+             (++) When both prescalers are used, it is recommended to configure the 
+                 asynchronous prescaler to a high value to minimize power consumption.
+         (#) All RTC registers are Write protected. Writing to the RTC registers
+             is enabled by writing a key into the Write Protection register, RTC_WPR.
+         (#) To configure the RTC Calendar, user application should enter 
+             initialization mode. In this mode, the calendar counter is stopped 
+             and its value can be updated. When the initialization sequence is 
+             complete, the calendar restarts counting after 4 RTCCLK cycles.
+         (#) To read the calendar through the shadow registers after Calendar 
+             initialization, calendar update or after wakeup from low power modes 
+             the software must first clear the RSF flag. The software must then 
+             wait until it is set again before reading the calendar, which means 
+             that the calendar registers have been correctly copied into the 
+             RTC_TR and RTC_DR shadow registers.The HAL_RTC_WaitForSynchro() function 
+             implements the above software sequence (RSF clear and RSF check).
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the RTC peripheral 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc)
+{
+  /* Check the RTC peripheral state */
+  if(hrtc == NULL)
+  {
+     return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance));
+  assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat));
+  assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv));
+  assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv));
+  assert_param (IS_RTC_OUTPUT(hrtc->Init.OutPut));
+  assert_param (IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity));
+  assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType));
+    
+  if(hrtc->State == HAL_RTC_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hrtc->Lock = HAL_UNLOCKED;
+    /* Initialize RTC MSP */
+    HAL_RTC_MspInit(hrtc);
+  }
+  
+  /* Set RTC state */  
+  hrtc->State = HAL_RTC_STATE_BUSY;  
+       
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); 
+    
+    /* Set RTC state */
+    hrtc->State = HAL_RTC_STATE_ERROR;
+    
+    return HAL_ERROR;
+  } 
+  else
+  { 
+    /* Clear RTC_CR FMT, OSEL and POL Bits */
+    hrtc->Instance->CR &= ((uint32_t)~(RTC_CR_FMT | RTC_CR_OSEL | RTC_CR_POL));
+    /* Set RTC_CR register */
+    hrtc->Instance->CR |= (uint32_t)(hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity);
+    
+    /* Configure the RTC PRER */
+    hrtc->Instance->PRER = (uint32_t)(hrtc->Init.SynchPrediv);
+    hrtc->Instance->PRER |= (uint32_t)(hrtc->Init.AsynchPrediv << 16);
+    
+    /* Exit Initialization mode */
+    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; 
+    
+    hrtc->Instance->OR &= (uint32_t)~RTC_OR_ALARMTYPE;
+    hrtc->Instance->OR |= (uint32_t)(hrtc->Init.OutPutType); 
+    
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); 
+    
+    /* Set RTC state */
+    hrtc->State = HAL_RTC_STATE_READY;
+    
+    return HAL_OK;
+  }
+}
+
+/**
+  * @brief  DeInitializes the RTC peripheral 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @note   This function doesn't reset the RTC Backup Data registers.   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc)
+{
+  uint32_t tickstart = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance));
+
+  /* Set RTC state */
+  hrtc->State = HAL_RTC_STATE_BUSY; 
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); 
+    
+    /* Set RTC state */
+    hrtc->State = HAL_RTC_STATE_ERROR;
+    
+    return HAL_ERROR;
+  }  
+  else
+  {
+    /* Reset TR, DR and CR registers */
+    hrtc->Instance->TR = (uint32_t)0x00000000;
+    hrtc->Instance->DR = (uint32_t)0x00002101;
+    /* Reset All CR bits except CR[2:0] */
+    hrtc->Instance->CR &= (uint32_t)0x00000007;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till WUTWF flag is set and if Time out is reached exit */
+    while(((hrtc->Instance->ISR) & RTC_ISR_WUTWF) == (uint32_t)RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      { 
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); 
+        
+        /* Set RTC state */
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        
+        return HAL_TIMEOUT;
+      }      
+    }
+    
+    /* Reset all RTC CR register bits */
+    hrtc->Instance->CR &= (uint32_t)0x00000000;
+    hrtc->Instance->WUTR = (uint32_t)0x0000FFFF;
+    hrtc->Instance->PRER = (uint32_t)0x007F00FF;
+    hrtc->Instance->ALRMAR = (uint32_t)0x00000000;
+    hrtc->Instance->ALRMBR = (uint32_t)0x00000000;
+    hrtc->Instance->SHIFTR = (uint32_t)0x00000000;
+    hrtc->Instance->CALR = (uint32_t)0x00000000;
+    hrtc->Instance->ALRMASSR = (uint32_t)0x00000000;
+    hrtc->Instance->ALRMBSSR = (uint32_t)0x00000000;
+    
+    /* Reset ISR register and exit initialization mode */
+    hrtc->Instance->ISR = (uint32_t)0x00000000;
+    
+    /* Reset Tamper and alternate functions configuration register */
+    hrtc->Instance->TAMPCR = 0x00000000;
+    
+    /* Reset Option register */
+    hrtc->Instance->OR = 0x00000000;
+    
+    /* If  RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+    if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+    {
+      if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);  
+        
+        hrtc->State = HAL_RTC_STATE_ERROR;
+        
+        return HAL_ERROR;
+      }
+    }    
+  }
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+  
+  /* De-Initialize RTC MSP */
+  HAL_RTC_MspDeInit(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_RESET; 
+
+  /* Release Lock */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the RTC MSP.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.  
+  * @retval None
+  */
+__weak void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  DeInitializes the RTC MSP.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC. 
+  * @retval None
+  */
+__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Group2 RTC Time and Date functions
+ *  @brief   RTC Time and Date functions
+ *
+@verbatim   
+ ===============================================================================
+                 ##### RTC Time and Date functions #####
+ ===============================================================================  
+ 
+ [..] This section provides functions allowing to configure Time and Date features
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sets RTC current time.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTime: Pointer to Time structure
+  * @param  Format: Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg FORMAT_BIN: Binary data format 
+  *            @arg FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+  uint32_t tmpreg = 0;
+  
+ /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving));
+  assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation));
+  
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  if(Format == RTC_FORMAT_BIN)
+  {
+    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+    {
+      assert_param(IS_RTC_HOUR12(sTime->Hours));
+      assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
+    } 
+    else
+    {
+      sTime->TimeFormat = 0x00;
+      assert_param(IS_RTC_HOUR24(sTime->Hours));
+    }
+    assert_param(IS_RTC_MINUTES(sTime->Minutes));
+    assert_param(IS_RTC_SECONDS(sTime->Seconds));
+    
+    tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(sTime->Hours) << 16) | \
+                        ((uint32_t)RTC_ByteToBcd2(sTime->Minutes) << 8) | \
+                        ((uint32_t)RTC_ByteToBcd2(sTime->Seconds)) | \
+                        (((uint32_t)sTime->TimeFormat) << 16));  
+  }
+  else
+  {
+    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+    {
+      tmpreg = RTC_Bcd2ToByte(sTime->Hours);
+      assert_param(IS_RTC_HOUR12(tmpreg));
+      assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat)); 
+    } 
+    else
+    {
+      sTime->TimeFormat = 0x00;
+      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours)));
+    }
+    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes)));
+    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds)));
+    tmpreg = (((uint32_t)(sTime->Hours) << 16) | \
+              ((uint32_t)(sTime->Minutes) << 8) | \
+              ((uint32_t)sTime->Seconds) | \
+              ((uint32_t)(sTime->TimeFormat) << 16));   
+  }
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); 
+    
+    /* Set RTC state */
+    hrtc->State = HAL_RTC_STATE_ERROR;
+    
+    /* Process Unlocked */ 
+    __HAL_UNLOCK(hrtc);
+    
+    return HAL_ERROR;
+  } 
+  else
+  {
+    /* Set the RTC_TR register */
+    hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK);
+     
+    /* Clear the bits to be configured */
+    hrtc->Instance->CR &= (uint32_t)~RTC_CR_BCK;
+    
+    /* Configure the RTC_CR register */
+    hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation);
+    
+    /* Exit Initialization mode */
+    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;  
+    
+    /* If  CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+    if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+    {
+      if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+      {        
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);  
+        
+        hrtc->State = HAL_RTC_STATE_ERROR;
+        
+        /* Process Unlocked */ 
+        __HAL_UNLOCK(hrtc);
+        
+        return HAL_ERROR;
+      }
+    }
+    
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+    
+   hrtc->State = HAL_RTC_STATE_READY;
+  
+   __HAL_UNLOCK(hrtc); 
+     
+   return HAL_OK;
+  }
+}
+
+/**
+  * @brief  Gets RTC current time.
+  * @param  hrtc: RTC handle
+  * @param  sTime: Pointer to Time structure with Hours, Minutes and Seconds fields returned 
+  *                with input format (BIN or BCD), also SubSeconds field returning the
+  *                RTC_SSR register content and SecondFraction field the Synchronous pre-scaler
+  *                factor to be used for second fraction ratio computation.
+  * @param  Format: Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN: Binary data format 
+  *            @arg RTC_FORMAT_BCD: BCD data format
+  * @note  You can use SubSeconds and SecondFraction (sTime structure fields returned) to convert SubSeconds
+  *        value in second fraction ratio with time unit following generic formula:
+  *        Second fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit
+  *        This conversion can be performed only if no shift operation is pending (ie. SHFP=0) when PREDIV_S >= SS
+  * @note  You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values 
+  *        in the higher-order calendar shadow registers to ensure consistency between the time and date values.
+  *        Reading RTC current time locks the values in calendar shadow registers until Current date is read
+  *        to ensure consistency between the time and date values.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  
+  /* Get subseconds values from the correspondent registers*/
+  sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR);
+
+  /* Get the TR register */
+  tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK); 
+  
+  /* Fill the structure fields with the read parameters */
+  sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16);
+  sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >>8);
+  sTime->Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU));
+  sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16); 
+  
+  /* Check the input parameters format */
+  if(Format == RTC_FORMAT_BIN)
+  {
+    /* Convert the time structure parameters to Binary format */
+    sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours);
+    sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes);
+    sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds);  
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets RTC current date.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sDate: Pointer to date structure
+  * @param  Format: specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN: Binary data format 
+  *            @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+  uint32_t datetmpreg = 0;
+  
+ /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  
+ /* Process Locked */ 
+ __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY; 
+  
+  if((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10) == 0x10))
+  {
+    sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10)) + (uint8_t)0x0A);
+  }
+  
+  assert_param(IS_RTC_WEEKDAY(sDate->WeekDay));
+  
+  if(Format == RTC_FORMAT_BIN)
+  {   
+    assert_param(IS_RTC_YEAR(sDate->Year));
+    assert_param(IS_RTC_MONTH(sDate->Month));
+    assert_param(IS_RTC_DATE(sDate->Date)); 
+    
+   datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << 16) | \
+                 ((uint32_t)RTC_ByteToBcd2(sDate->Month) << 8) | \
+                 ((uint32_t)RTC_ByteToBcd2(sDate->Date)) | \
+                 ((uint32_t)sDate->WeekDay << 13));   
+  }
+  else
+  {   
+    assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year)));
+    datetmpreg = RTC_Bcd2ToByte(sDate->Month);
+    assert_param(IS_RTC_MONTH(datetmpreg));
+    datetmpreg = RTC_Bcd2ToByte(sDate->Date);
+    assert_param(IS_RTC_DATE(datetmpreg));
+    
+    datetmpreg = ((((uint32_t)sDate->Year) << 16) | \
+                  (((uint32_t)sDate->Month) << 8) | \
+                  ((uint32_t)sDate->Date) | \
+                  (((uint32_t)sDate->WeekDay) << 13));  
+  }
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); 
+    
+    /* Set RTC state*/
+    hrtc->State = HAL_RTC_STATE_ERROR;
+    
+    /* Process Unlocked */ 
+    __HAL_UNLOCK(hrtc);
+    
+    return HAL_ERROR;
+  } 
+  else
+  {
+    /* Set the RTC_DR register */
+    hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK);
+    
+    /* Exit Initialization mode */
+    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;  
+    
+    /* If  CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+    if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+    {
+      if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+      { 
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);  
+        
+        hrtc->State = HAL_RTC_STATE_ERROR;
+        
+        /* Process Unlocked */ 
+        __HAL_UNLOCK(hrtc);
+        
+        return HAL_ERROR;
+      }
+    }
+    
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);  
+    
+    hrtc->State = HAL_RTC_STATE_READY ;
+    
+    /* Process Unlocked */ 
+    __HAL_UNLOCK(hrtc);
+    
+    return HAL_OK;    
+  }
+}
+
+/**
+  * @brief  Gets RTC current date.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sDate: Pointer to Date structure
+  * @param  Format: Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_FORMAT_BIN:  Binary data format 
+  *            @arg RTC_FORMAT_BCD:  BCD data format
+  * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values 
+  * in the higher-order calendar shadow registers to ensure consistency between the time and date values.
+  * Reading RTC current time locks the values in calendar shadow registers until Current date is read.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
+{
+  uint32_t datetmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+          
+  /* Get the DR register */
+  datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK); 
+
+  /* Fill the structure fields with the read parameters */
+  sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> 16);
+  sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> 8);
+  sDate->Date = (uint8_t)(datetmpreg & (RTC_DR_DT | RTC_DR_DU));
+  sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> 13); 
+
+  /* Check the input parameters format */
+  if(Format == RTC_FORMAT_BIN)
+  {    
+    /* Convert the date structure parameters to Binary format */
+    sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year);
+    sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month);
+    sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date);  
+  }
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Group3 RTC Alarm functions
+ *  @brief   RTC Alarm functions
+ *
+@verbatim   
+ ===============================================================================
+                 ##### RTC Alarm functions #####
+ ===============================================================================  
+ 
+ [..] This section provides functions allowing to configure Alarm feature
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Sets the specified RTC Alarm.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sAlarm: Pointer to Alarm structure
+  * @param  Format: Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg FORMAT_BIN: Binary data format 
+  *             @arg FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+  uint32_t tickstart = 0;
+  uint32_t tmpreg = 0, subsecondtmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+  assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
+  assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+  
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  if(Format == RTC_FORMAT_BIN)
+  {
+    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+    {
+      assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    } 
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00;
+      assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+    }
+    assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+    assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+    
+    if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+    }
+    else
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+    }
+    
+    tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24) | \
+              ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+              ((uint32_t)sAlarm->AlarmMask)); 
+  }
+  else
+  {
+    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+    {
+      tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+      assert_param(IS_RTC_HOUR12(tmpreg));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    } 
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00;
+      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+    }
+    
+    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+    
+    if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg));    
+    }
+    else
+    {
+      tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg));      
+    }  
+    
+    tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16) | \
+              ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8) | \
+              ((uint32_t) sAlarm->AlarmTime.Seconds) | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
+              ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24) | \
+              ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+              ((uint32_t)sAlarm->AlarmMask));   
+  }
+  
+  /* Configure the Alarm A or Alarm B Sub Second registers */
+  subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Configure the Alarm register */
+  if(sAlarm->Alarm == RTC_ALARM_A)
+  {
+    /* Disable the Alarm A interrupt */
+    __HAL_RTC_ALARMA_DISABLE(hrtc);
+    
+    /* In case of interrupt mode is used, the interrupt source must disabled */ 
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+        
+        hrtc->State = HAL_RTC_STATE_TIMEOUT; 
+        
+        /* Process Unlocked */ 
+        __HAL_UNLOCK(hrtc);
+        
+        return HAL_TIMEOUT;
+      }   
+    }
+    
+    hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+    /* Configure the Alarm A Sub Second register */
+    hrtc->Instance->ALRMASSR = subsecondtmpreg;
+    /* Configure the Alarm state: Enable Alarm */
+    __HAL_RTC_ALARMA_ENABLE(hrtc);
+  }
+  else
+  {
+    /* Disable the Alarm B interrupt */
+    __HAL_RTC_ALARMB_DISABLE(hrtc);
+    
+    /* In case of interrupt mode is used, the interrupt source must disabled */ 
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+        
+        hrtc->State = HAL_RTC_STATE_TIMEOUT; 
+        
+        /* Process Unlocked */ 
+        __HAL_UNLOCK(hrtc);
+        
+        return HAL_TIMEOUT;
+      }  
+    }    
+    
+    hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
+    /* Configure the Alarm B Sub Second register */
+    hrtc->Instance->ALRMBSSR = subsecondtmpreg;
+    /* Configure the Alarm state: Enable Alarm */
+    __HAL_RTC_ALARMB_ENABLE(hrtc); 
+  }
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);   
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets the specified RTC Alarm with Interrupt 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sAlarm: Pointer to Alarm structure
+  * @param  Format: Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg FORMAT_BIN: Binary data format 
+  *             @arg FORMAT_BCD: BCD data format
+  * @note   The Alarm register can only be written when the corresponding Alarm
+  *         is disabled (Use the HAL_RTC_DeactivateAlarm()).   
+  * @note   The HAL_RTC_SetTime() must be called before enabling the Alarm feature.   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
+{
+  uint32_t tickstart = 0;
+  uint32_t tmpreg = 0, subsecondtmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_ALARM(sAlarm->Alarm));
+  assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
+  assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
+  assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
+      
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  if(Format == RTC_FORMAT_BIN)
+  {
+    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+    {
+      assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    } 
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00;
+      assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
+    }
+    assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
+    assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
+    
+    if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
+    }
+    else
+    {
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
+    }
+    tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
+              ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24) | \
+              ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+              ((uint32_t)sAlarm->AlarmMask)); 
+  }
+  else
+  {
+    if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
+    {
+      tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+      assert_param(IS_RTC_HOUR12(tmpreg));
+      assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
+    } 
+    else
+    {
+      sAlarm->AlarmTime.TimeFormat = 0x00;
+      assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
+    }
+    
+    assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
+    assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
+    
+    if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
+    {
+      tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg));    
+    }
+    else
+    {
+      tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+      assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg));      
+    }
+    tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16) | \
+              ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8) | \
+              ((uint32_t) sAlarm->AlarmTime.Seconds) | \
+              ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
+              ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24) | \
+              ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
+              ((uint32_t)sAlarm->AlarmMask));     
+  }
+  /* Configure the Alarm A or Alarm B Sub Second registers */
+  subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* Configure the Alarm register */
+  if(sAlarm->Alarm == RTC_ALARM_A)
+  {
+    /* Disable the Alarm A interrupt */
+    __HAL_RTC_ALARMA_DISABLE(hrtc);
+
+    /* Clear flag alarm A */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+        
+        hrtc->State = HAL_RTC_STATE_TIMEOUT; 
+        
+        /* Process Unlocked */ 
+        __HAL_UNLOCK(hrtc);
+        
+        return HAL_TIMEOUT;
+      }  
+    }
+    
+    hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
+    /* Configure the Alarm A Sub Second register */
+    hrtc->Instance->ALRMASSR = subsecondtmpreg;
+    /* Configure the Alarm state: Enable Alarm */
+    __HAL_RTC_ALARMA_ENABLE(hrtc);
+    /* Configure the Alarm interrupt */
+    __HAL_RTC_ALARM_ENABLE_IT(hrtc,RTC_IT_ALRA);
+  }
+  else
+  {
+    /* Disable the Alarm B interrupt */
+    __HAL_RTC_ALARMB_DISABLE(hrtc);
+
+    /* Clear flag alarm B */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+        
+        hrtc->State = HAL_RTC_STATE_TIMEOUT; 
+        
+        /* Process Unlocked */ 
+        __HAL_UNLOCK(hrtc);
+        
+        return HAL_TIMEOUT;
+      }  
+    }
+
+    hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
+    /* Configure the Alarm B Sub Second register */
+    hrtc->Instance->ALRMBSSR = subsecondtmpreg;
+    /* Configure the Alarm state: Enable Alarm */
+    __HAL_RTC_ALARMB_ENABLE(hrtc);
+    /* Configure the Alarm interrupt */
+    __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB);
+  }
+
+  /* RTC Alarm Interrupt Configuration: EXTI configuration */
+  __HAL_RTC_ALARM_EXTI_ENABLE_IT();
+  
+  EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT;
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);  
+  
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);  
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactive the specified RTC Alarm 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Alarm: Specifies the Alarm.
+  *          This parameter can be one of the following values:
+  *            @arg RTC_ALARM_A:  AlarmA
+  *            @arg RTC_ALARM_B:  AlarmB
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm)
+{
+  uint32_t tickstart = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_ALARM(Alarm));
+  
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  if(Alarm == RTC_ALARM_A)
+  {
+    /* AlarmA */
+    __HAL_RTC_ALARMA_DISABLE(hrtc);
+    
+    /* In case of interrupt mode is used, the interrupt source must disabled */ 
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      { 
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+        
+        hrtc->State = HAL_RTC_STATE_TIMEOUT; 
+        
+        /* Process Unlocked */ 
+        __HAL_UNLOCK(hrtc);
+        
+        return HAL_TIMEOUT;
+      }      
+    }
+  }
+  else
+  {
+    /* AlarmB */
+    __HAL_RTC_ALARMB_DISABLE(hrtc);
+    
+    /* In case of interrupt mode is used, the interrupt source must disabled */ 
+    __HAL_RTC_ALARM_DISABLE_IT(hrtc,RTC_IT_ALRB);
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+        
+        hrtc->State = HAL_RTC_STATE_TIMEOUT; 
+        
+        /* Process Unlocked */ 
+        __HAL_UNLOCK(hrtc);
+        
+        return HAL_TIMEOUT;
+      }    
+    }
+  }
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);  
+  
+  return HAL_OK; 
+}
+           
+/**
+  * @brief  Gets the RTC Alarm value and masks.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sAlarm: Pointer to Date structure
+  * @param  Alarm: Specifies the Alarm.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_ALARM_A: AlarmA
+  *             @arg RTC_ALARM_B: AlarmB  
+  * @param  Format: Specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_FORMAT_BIN: Binary data format 
+  *             @arg RTC_FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format)
+{
+  uint32_t tmpreg = 0, subsecondtmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+  assert_param(IS_RTC_ALARM(Alarm));
+  
+  if(Alarm == RTC_ALARM_A)
+  {
+    /* AlarmA */
+    sAlarm->Alarm = RTC_ALARM_A;
+    
+    tmpreg = (uint32_t)(hrtc->Instance->ALRMAR);
+    subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR ) & RTC_ALRMASSR_SS);
+  }
+  else
+  {
+    sAlarm->Alarm = RTC_ALARM_B;
+    
+    tmpreg = (uint32_t)(hrtc->Instance->ALRMBR);
+    subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS);
+  }
+    
+  /* Fill the structure with the read parameters */
+  sAlarm->AlarmTime.Hours = (uint32_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> 16);
+  sAlarm->AlarmTime.Minutes = (uint32_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> 8);
+  sAlarm->AlarmTime.Seconds = (uint32_t)(tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU));
+  sAlarm->AlarmTime.TimeFormat = (uint32_t)((tmpreg & RTC_ALRMAR_PM) >> 16);
+  sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg;
+  sAlarm->AlarmDateWeekDay = (uint32_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> 24);
+  sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL);
+  sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL);
+    
+  if(Format == RTC_FORMAT_BIN)
+  {
+    sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
+    sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes);
+    sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds);
+    sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
+  }  
+    
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles Alarm interrupt request.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef* hrtc)
+{  
+  if(__HAL_RTC_ALARM_GET_IT(hrtc, RTC_IT_ALRA))
+  {
+    /* Get the status of the Interrupt */
+    if((uint32_t)(hrtc->Instance->CR & RTC_IT_ALRA) != (uint32_t)RESET)
+    {
+      /* AlarmA callback */ 
+      HAL_RTC_AlarmAEventCallback(hrtc);
+      
+      /* Clear the Alarm interrupt pending bit */
+      __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRAF);
+    }
+  }
+  
+  if(__HAL_RTC_ALARM_GET_IT(hrtc, RTC_IT_ALRB))
+  {
+    /* Get the status of the Interrupt */
+    if((uint32_t)(hrtc->Instance->CR & RTC_IT_ALRB) != (uint32_t)RESET)
+    {
+      /* AlarmB callback */ 
+      HAL_RTCEx_AlarmBEventCallback(hrtc);
+      
+      /* Clear the Alarm interrupt pending bit */
+      __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRBF);
+    }
+  }
+  
+  /* Clear the EXTI's line Flag for RTC Alarm */
+  __HAL_RTC_ALARM_EXTI_CLEAR_FLAG();
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+  * @brief  Alarm A callback.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_AlarmAEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  This function handles AlarmA Polling request.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = 0; 
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+  while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == RESET)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Clear the Alarm interrupt pending bit */
+  __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  return HAL_OK;  
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Group4 Peripheral Control functions 
+ *  @brief   Peripheral Control functions 
+ *
+@verbatim   
+ ===============================================================================
+                     ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides functions allowing to
+      (+) Wait for RTC Time and Date Synchronization
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are 
+  *         synchronized with RTC APB clock.
+  * @note   The RTC Resynchronization mode is write protected, use the 
+  *         __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. 
+  * @note   To read the calendar through the shadow registers after Calendar 
+  *         initialization, calendar update or after wakeup from low power modes 
+  *         the software must first clear the RSF flag. 
+  *         The software must then wait until it is set again before reading 
+  *         the calendar, which means that the calendar registers have been 
+  *         correctly copied into the RTC_TR and RTC_DR shadow registers.   
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc)
+{
+  uint32_t tickstart = 0;
+
+  /* Clear RSF flag */
+  hrtc->Instance->ISR &= (uint32_t)RTC_RSF_MASK;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+  /* Wait the registers to be synchronised */
+  while((hrtc->Instance->ISR & RTC_ISR_RSF) == (uint32_t)RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+    {       
+      return HAL_TIMEOUT;
+    } 
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup RTC_Group5 Peripheral State functions 
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+ ===============================================================================
+                     ##### Peripheral State functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides functions allowing to
+      (+) Get RTC state
+
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Returns the RTC state.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL state
+  */
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef* hrtc)
+{
+  return hrtc->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  Enters the RTC Initialization mode.
+  * @note   The RTC Initialization mode is write protected, use the
+  *         __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc)
+{
+  uint32_t tickstart = 0; 
+  
+  /* Check if the Initialization mode is set */
+  if((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
+  {
+    /* Set the Initialization mode */
+    hrtc->Instance->ISR = (uint32_t)RTC_INIT_MASK;
+
+    /* Get tick */
+    tickstart = HAL_GetTick();
+
+    /* Wait till RTC is in INIT state and if Time out is reached exit */
+    while((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {       
+        return HAL_TIMEOUT;
+      } 
+    }
+  }
+  
+  return HAL_OK;  
+}
+
+
+/**
+  * @brief  Converts a 2 digit decimal to BCD format.
+  * @param  Value: Byte to be converted
+  * @retval Converted byte
+  */
+uint8_t RTC_ByteToBcd2(uint8_t Value)
+{
+  uint32_t bcdhigh = 0;
+  
+  while(Value >= 10)
+  {
+    bcdhigh++;
+    Value -= 10;
+  }
+  
+  return  ((uint8_t)(bcdhigh << 4) | Value);
+}
+
+/**
+  * @brief  Converts from 2 digit BCD to Binary.
+  * @param  Value: BCD value to be converted
+  * @retval Converted word
+  */
+uint8_t RTC_Bcd2ToByte(uint8_t Value)
+{
+  uint32_t tmp = 0;
+  tmp = ((uint8_t)(Value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10;
+  return (tmp + (Value & (uint8_t)0x0F));
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_rtc.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,806 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_rtc.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of RTC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_RTC_H
+#define __STM32F7xx_HAL_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RTC
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Types RTC Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  HAL State structures definition  
+  */ 
+typedef enum
+{
+  HAL_RTC_STATE_RESET             = 0x00,  /*!< RTC not yet initialized or disabled */
+  HAL_RTC_STATE_READY             = 0x01,  /*!< RTC initialized and ready for use   */
+  HAL_RTC_STATE_BUSY              = 0x02,  /*!< RTC process is ongoing              */     
+  HAL_RTC_STATE_TIMEOUT           = 0x03,  /*!< RTC timeout state                   */  
+  HAL_RTC_STATE_ERROR             = 0x04   /*!< RTC error state                     */      
+                                                                        
+}HAL_RTCStateTypeDef;
+
+/** 
+  * @brief  RTC Configuration Structure definition  
+  */
+typedef struct
+{
+  uint32_t HourFormat;      /*!< Specifies the RTC Hour Format.
+                                 This parameter can be a value of @ref RTC_Hour_Formats */         
+
+  uint32_t AsynchPrediv;    /*!< Specifies the RTC Asynchronous Predivider value.
+                                 This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */        
+                               
+  uint32_t SynchPrediv;     /*!< Specifies the RTC Synchronous Predivider value.
+                                 This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */   
+  
+  uint32_t OutPut;          /*!< Specifies which signal will be routed to the RTC output.   
+                                 This parameter can be a value of @ref RTCEx_Output_selection_Definitions */      
+  
+  uint32_t OutPutPolarity;  /*!< Specifies the polarity of the output signal.  
+                                 This parameter can be a value of @ref RTC_Output_Polarity_Definitions */ 
+  
+  uint32_t OutPutType;      /*!< Specifies the RTC Output Pin mode.   
+                                 This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */             
+}RTC_InitTypeDef;
+
+/** 
+  * @brief  RTC Time structure definition  
+  */
+typedef struct
+{
+  uint8_t Hours;            /*!< Specifies the RTC Time Hour.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected  */
+
+  uint8_t Minutes;          /*!< Specifies the RTC Time Minutes.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+  
+  uint8_t Seconds;          /*!< Specifies the RTC Time Seconds.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+  
+  uint32_t SubSeconds;      /*!< Specifies the RTC Time SubSeconds.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+  uint8_t TimeFormat;       /*!< Specifies the RTC AM/PM Time.
+                                 This parameter can be a value of @ref RTC_AM_PM_Definitions */ 
+  
+  uint32_t DayLightSaving;  /*!< Specifies RTC_DayLightSaveOperation: the value of hour adjustment.
+                                 This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+  
+  uint32_t StoreOperation;  /*!< Specifies RTC_StoreOperation value to be written in the BCK bit 
+                                 in CR register to store the operation.
+                                 This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+}RTC_TimeTypeDef; 
+  
+/** 
+  * @brief  RTC Date structure definition  
+  */
+typedef struct
+{
+  uint8_t WeekDay;  /*!< Specifies the RTC Date WeekDay.
+                         This parameter can be a value of @ref RTC_WeekDay_Definitions */
+  
+  uint8_t Month;    /*!< Specifies the RTC Date Month (in BCD format).
+                         This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+  uint8_t Date;     /*!< Specifies the RTC Date.
+                         This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+  
+  uint8_t Year;     /*!< Specifies the RTC Date Year.
+                         This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+                        
+}RTC_DateTypeDef;
+
+/** 
+  * @brief  RTC Alarm structure definition  
+  */
+typedef struct
+{
+  RTC_TimeTypeDef AlarmTime;     /*!< Specifies the RTC Alarm Time members */
+    
+  uint32_t AlarmMask;            /*!< Specifies the RTC Alarm Masks.
+                                      This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+  
+  uint32_t AlarmSubSecondMask;   /*!< Specifies the RTC Alarm SubSeconds Masks.
+                                      This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */                                   
+
+  uint32_t AlarmDateWeekDaySel;  /*!< Specifies the RTC Alarm is on Date or WeekDay.
+                                     This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+  
+  uint8_t AlarmDateWeekDay;      /*!< Specifies the RTC Alarm Date/WeekDay.
+                                      If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+                                      If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+                                                                     
+  uint32_t Alarm;                /*!< Specifies the alarm .
+                                      This parameter can be a value of @ref RTC_Alarms_Definitions */                            
+}RTC_AlarmTypeDef;
+
+/** 
+  * @brief  RTC Handle Structure definition  
+  */ 
+typedef struct
+{
+  RTC_TypeDef                 *Instance;  /*!< Register base address    */
+   
+  RTC_InitTypeDef             Init;       /*!< RTC required parameters  */ 
+  
+  HAL_LockTypeDef             Lock;       /*!< RTC locking object       */
+  
+  __IO HAL_RTCStateTypeDef    State;      /*!< Time communication state */
+    
+}RTC_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Constants RTC Exported Constants
+  * @{
+  */
+ 
+/** @defgroup RTC_Hour_Formats RTC Hour Formats
+  * @{
+  */ 
+#define RTC_HOURFORMAT_24              ((uint32_t)0x00000000)
+#define RTC_HOURFORMAT_12              ((uint32_t)0x00000040)
+/**
+  * @}
+  */ 
+
+
+/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions 
+  * @{
+  */ 
+#define RTC_OUTPUT_POLARITY_HIGH       ((uint32_t)0x00000000)
+#define RTC_OUTPUT_POLARITY_LOW        ((uint32_t)0x00100000)
+/**
+  * @}
+  */ 
+
+/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
+  * @{
+  */ 
+#define RTC_OUTPUT_TYPE_OPENDRAIN      ((uint32_t)0x00000000)
+#define RTC_OUTPUT_TYPE_PUSHPULL       ((uint32_t)RTC_OR_ALARMTYPE)  /* 0x00000008 */
+/**
+  * @}
+  */
+
+/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
+  * @{
+  */ 
+#define RTC_HOURFORMAT12_AM            ((uint8_t)0x00)
+#define RTC_HOURFORMAT12_PM            ((uint8_t)0x40)
+/**
+  * @}
+  */ 
+
+/** @defgroup RTC_DayLightSaving_Definitions RTC DayLight Saving Definitions
+  * @{
+  */ 
+#define RTC_DAYLIGHTSAVING_SUB1H       ((uint32_t)0x00020000)
+#define RTC_DAYLIGHTSAVING_ADD1H       ((uint32_t)0x00010000)
+#define RTC_DAYLIGHTSAVING_NONE        ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_StoreOperation_Definitions RTC Store Operation Definitions
+  * @{
+  */ 
+#define RTC_STOREOPERATION_RESET        ((uint32_t)0x00000000)
+#define RTC_STOREOPERATION_SET          ((uint32_t)0x00040000)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions
+  * @{
+  */ 
+#define RTC_FORMAT_BIN                      ((uint32_t)0x000000000)
+#define RTC_FORMAT_BCD                      ((uint32_t)0x000000001)
+/**
+  * @}
+  */ 
+
+/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
+  * @{
+  */
+/* Coded in BCD format */
+#define RTC_MONTH_JANUARY              ((uint8_t)0x01)
+#define RTC_MONTH_FEBRUARY             ((uint8_t)0x02)
+#define RTC_MONTH_MARCH                ((uint8_t)0x03)
+#define RTC_MONTH_APRIL                ((uint8_t)0x04)
+#define RTC_MONTH_MAY                  ((uint8_t)0x05)
+#define RTC_MONTH_JUNE                 ((uint8_t)0x06)
+#define RTC_MONTH_JULY                 ((uint8_t)0x07)
+#define RTC_MONTH_AUGUST               ((uint8_t)0x08)
+#define RTC_MONTH_SEPTEMBER            ((uint8_t)0x09)
+#define RTC_MONTH_OCTOBER              ((uint8_t)0x10)
+#define RTC_MONTH_NOVEMBER             ((uint8_t)0x11)
+#define RTC_MONTH_DECEMBER             ((uint8_t)0x12)
+/**
+  * @}
+  */ 
+
+/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
+  * @{
+  */   
+#define RTC_WEEKDAY_MONDAY             ((uint8_t)0x01)
+#define RTC_WEEKDAY_TUESDAY            ((uint8_t)0x02)
+#define RTC_WEEKDAY_WEDNESDAY          ((uint8_t)0x03)
+#define RTC_WEEKDAY_THURSDAY           ((uint8_t)0x04)
+#define RTC_WEEKDAY_FRIDAY             ((uint8_t)0x05)
+#define RTC_WEEKDAY_SATURDAY           ((uint8_t)0x06)
+#define RTC_WEEKDAY_SUNDAY             ((uint8_t)0x07)
+/**
+  * @}
+  */                                 
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC Alarm Date WeekDay Definitions
+  * @{
+  */ 
+#define RTC_ALARMDATEWEEKDAYSEL_DATE      ((uint32_t)0x00000000)
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY   ((uint32_t)0x40000000)
+/**
+  * @}
+  */ 
+
+/** @defgroup RTC_AlarmMask_Definitions RTC Alarm Mask Definitions 
+  * @{
+  */ 
+#define RTC_ALARMMASK_NONE                ((uint32_t)0x00000000)
+#define RTC_ALARMMASK_DATEWEEKDAY         RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS               RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES             RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS             RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL                 ((uint32_t)0x80808080)
+/**
+  * @}
+  */ 
+
+/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions 
+  * @{
+  */ 
+#define RTC_ALARM_A                       RTC_CR_ALRAE
+#define RTC_ALARM_B                       RTC_CR_ALRBE
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions
+  * @{
+  */
+#define RTC_ALARMSUBSECONDMASK_ALL         ((uint32_t)0x00000000)  /*!< All Alarm SS fields are masked. 
+                                                                        There is no comparison on sub seconds 
+                                                                        for Alarm */
+#define RTC_ALARMSUBSECONDMASK_SS14_1      ((uint32_t)0x01000000)  /*!< SS[14:1] are don't care in Alarm 
+                                                                        comparison. Only SS[0] is compared.    */
+#define RTC_ALARMSUBSECONDMASK_SS14_2      ((uint32_t)0x02000000)  /*!< SS[14:2] are don't care in Alarm 
+                                                                        comparison. Only SS[1:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_3      ((uint32_t)0x03000000)  /*!< SS[14:3] are don't care in Alarm 
+                                                                        comparison. Only SS[2:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_4      ((uint32_t)0x04000000)  /*!< SS[14:4] are don't care in Alarm 
+                                                                        comparison. Only SS[3:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_5      ((uint32_t)0x05000000)  /*!< SS[14:5] are don't care in Alarm 
+                                                                        comparison. Only SS[4:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_6      ((uint32_t)0x06000000)  /*!< SS[14:6] are don't care in Alarm 
+                                                                        comparison. Only SS[5:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_7      ((uint32_t)0x07000000)  /*!< SS[14:7] are don't care in Alarm 
+                                                                        comparison. Only SS[6:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_8      ((uint32_t)0x08000000)  /*!< SS[14:8] are don't care in Alarm 
+                                                                        comparison. Only SS[7:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_9      ((uint32_t)0x09000000)  /*!< SS[14:9] are don't care in Alarm 
+                                                                        comparison. Only SS[8:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_10     ((uint32_t)0x0A000000)  /*!< SS[14:10] are don't care in Alarm 
+                                                                        comparison. Only SS[9:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_11     ((uint32_t)0x0B000000)  /*!< SS[14:11] are don't care in Alarm 
+                                                                        comparison. Only SS[10:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_12     ((uint32_t)0x0C000000)  /*!< SS[14:12] are don't care in Alarm 
+                                                                        comparison.Only SS[11:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_SS14_13     ((uint32_t)0x0D000000)  /*!< SS[14:13] are don't care in Alarm 
+                                                                        comparison. Only SS[12:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14        ((uint32_t)0x0E000000)  /*!< SS[14] is don't care in Alarm 
+                                                                        comparison.Only SS[13:0] are compared  */
+#define RTC_ALARMSUBSECONDMASK_NONE        ((uint32_t)0x0F000000)  /*!< SS[14:0] are compared and must match 
+                                                                        to activate alarm. */
+/**
+  * @}
+  */   
+
+/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions 
+  * @{
+  */ 
+#define RTC_IT_TS                         ((uint32_t)RTC_CR_TSIE)
+#define RTC_IT_WUT                        ((uint32_t)RTC_CR_WUTIE)
+#define RTC_IT_ALRA                       ((uint32_t)RTC_CR_ALRAIE)
+#define RTC_IT_ALRB                       ((uint32_t)RTC_CR_ALRBIE)
+#define RTC_IT_TAMP                       ((uint32_t)RTC_TAMPCR_TAMPIE) /* Used only to Enable the Tamper Interrupt */
+#define RTC_IT_TAMP1                      ((uint32_t)RTC_TAMPCR_TAMP1IE)
+#define RTC_IT_TAMP2                      ((uint32_t)RTC_TAMPCR_TAMP2IE)
+#define RTC_IT_TAMP3                      ((uint32_t)RTC_TAMPCR_TAMP3IE)
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Flags_Definitions RTC Flags Definitions 
+  * @{
+  */ 
+#define RTC_FLAG_RECALPF                  ((uint32_t)RTC_ISR_RECALPF)
+#define RTC_FLAG_TAMP3F                   ((uint32_t)RTC_ISR_TAMP3F)
+#define RTC_FLAG_TAMP2F                   ((uint32_t)RTC_ISR_TAMP2F)
+#define RTC_FLAG_TAMP1F                   ((uint32_t)RTC_ISR_TAMP1F)
+#define RTC_FLAG_TSOVF                    ((uint32_t)RTC_ISR_TSOVF)
+#define RTC_FLAG_TSF                      ((uint32_t)RTC_ISR_TSF)
+#define RTC_FLAG_ITSF                     ((uint32_t)RTC_ISR_ITSF)
+#define RTC_FLAG_WUTF                     ((uint32_t)RTC_ISR_WUTF)
+#define RTC_FLAG_ALRBF                    ((uint32_t)RTC_ISR_ALRBF)
+#define RTC_FLAG_ALRAF                    ((uint32_t)RTC_ISR_ALRAF)
+#define RTC_FLAG_INITF                    ((uint32_t)RTC_ISR_INITF)
+#define RTC_FLAG_RSF                      ((uint32_t)RTC_ISR_RSF)
+#define RTC_FLAG_INITS                    ((uint32_t)RTC_ISR_INITS)
+#define RTC_FLAG_SHPF                     ((uint32_t)RTC_ISR_SHPF)
+#define RTC_FLAG_WUTWF                    ((uint32_t)RTC_ISR_WUTWF)
+#define RTC_FLAG_ALRBWF                   ((uint32_t)RTC_ISR_ALRBWF)
+#define RTC_FLAG_ALRAWF                   ((uint32_t)RTC_ISR_ALRAWF)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Macros RTC Exported Macros
+  * @{
+  */
+
+/** @brief Reset RTC handle state
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+
+/**
+  * @brief  Disable the write protection for RTC registers.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__)             \
+                        do{                                       \
+                            (__HANDLE__)->Instance->WPR = 0xCA;   \
+                            (__HANDLE__)->Instance->WPR = 0x53;   \
+                          } while(0)
+
+/**
+  * @brief  Enable the write protection for RTC registers.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__)              \
+                        do{                                       \
+                            (__HANDLE__)->Instance->WPR = 0xFF;   \
+                          } while(0)                            
+ 
+/**
+  * @brief  Enable the RTC ALARMA peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__)                           ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+  * @brief  Disable the RTC ALARMA peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__)                          ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+  * @brief  Enable the RTC ALARMB peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__)                           ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
+
+/**
+  * @brief  Disable the RTC ALARMB peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__)                          ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
+
+/**
+  * @brief  Enable the RTC Alarm interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. 
+  *          This parameter can be any combination of the following values:
+  *             @arg RTC_IT_ALRA: Alarm A interrupt
+  *             @arg RTC_IT_ALRB: Alarm B interrupt  
+  * @retval None
+  */   
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__)          ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC Alarm interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. 
+  *         This parameter can be any combination of the following values:
+  *            @arg RTC_IT_ALRA: Alarm A interrupt
+  *            @arg RTC_IT_ALRB: Alarm B interrupt  
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__)         ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified RTC Alarm interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_ALRA: Alarm A interrupt
+  *            @arg RTC_IT_ALRB: Alarm B interrupt  
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__)                  ((((((__HANDLE__)->Instance->ISR)& ((__INTERRUPT__)>> 4)) & 0x0000FFFF) != RESET)? SET : RESET)
+
+/**
+  * @brief  Get the selected RTC Alarm's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Alarm Flag to check.
+  *         This parameter can be:
+  *            @arg RTC_FLAG_ALRAF
+  *            @arg RTC_FLAG_ALRBF
+  *            @arg RTC_FLAG_ALRAWF     
+  *            @arg RTC_FLAG_ALRBWF    
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__)                (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+  * @brief  Clear the RTC Alarm's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_ALRAF
+  *             @arg RTC_FLAG_ALRBF 
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__)                  ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+                                       
+/**
+  * @brief  Check whether the specified RTC Alarm interrupt has been enabled or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Alarm interrupt sources to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_ALRA: Alarm A interrupt
+  *            @arg RTC_IT_ALRB: Alarm B interrupt
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Enable interrupt on the RTC Alarm associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_IT()            (EXTI->IMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Disable interrupt on the RTC Alarm associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_IT()           (EXTI->IMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+  * @brief  Enable event on the RTC Alarm associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT()         (EXTI->EMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Disable event on the RTC Alarm associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT()         (EXTI->EMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+  * @brief  Enable falling edge trigger on the RTC Alarm associated Exti line.  
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Disable falling edge trigger on the RTC Alarm associated Exti line.  
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+  * @brief  Enable rising edge trigger on the RTC Alarm associated Exti line.  
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief  Disable rising edge trigger on the RTC Alarm associated Exti line.  
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+  * @brief  Enable rising & falling edge trigger on the RTC Alarm associated Exti line.  
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief  Disable rising & falling edge trigger on the RTC Alarm associated Exti line.  
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+  * @brief Check whether the RTC Alarm associated Exti line interrupt flag is set or not.
+  * @retval Line Status.
+  */
+#define __HAL_RTC_ALARM_EXTI_GET_FLAG()              (EXTI->PR & RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief Clear the RTC Alarm associated Exti line flag.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()            (EXTI->PR = RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+  * @brief Generate a Software interrupt on RTC Alarm associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()         (EXTI->SWIER |= RTC_EXTI_LINE_ALARM_EVENT)
+/**
+  * @}
+  */
+
+/* Include RTC HAL Extension module */
+#include "stm32f7xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTC_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void       HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void       HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group2
+  * @{
+  */
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group3
+  * @{
+  */
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void                HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef   HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void         HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group4
+  * @{
+  */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef   HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
+/**
+  * @}
+  */
+
+/** @addtogroup RTC_Exported_Functions_Group5
+  * @{
+  */
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTC_Private_Constants RTC Private Constants
+  * @{
+  */
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK    ((uint32_t)0x007F7F7F)
+#define RTC_DR_RESERVED_MASK    ((uint32_t)0x00FFFF3F) 
+#define RTC_INIT_MASK           ((uint32_t)0xFFFFFFFF)  
+#define RTC_RSF_MASK            ((uint32_t)0xFFFFFF5F)
+
+#define RTC_TIMEOUT_VALUE       1000
+
+#define RTC_EXTI_LINE_ALARM_EVENT             ((uint32_t)EXTI_IMR_MR17)  /*!< External interrupt line 17 Connected to the RTC Alarm event */
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTC_Private_Macros RTC Private Macros
+  * @{
+  */
+
+/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters
+  * @{
+  */
+#define IS_RTC_HOUR_FORMAT(__FORMAT__) (((__FORMAT__) == RTC_HOURFORMAT_12) || \
+                                        ((__FORMAT__) == RTC_HOURFORMAT_24))
+#define IS_RTC_OUTPUT_POL(__POL__)     (((__POL__) == RTC_OUTPUT_POLARITY_HIGH) || \
+                                        ((__POL__) == RTC_OUTPUT_POLARITY_LOW))
+#define IS_RTC_OUTPUT_TYPE(__TYPE__)   (((__TYPE__) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+                                        ((__TYPE__) == RTC_OUTPUT_TYPE_PUSHPULL))
+#define IS_RTC_ASYNCH_PREDIV(__PREDIV__)   ((__PREDIV__) <= (uint32_t)0x7F) 
+#define IS_RTC_SYNCH_PREDIV(__PREDIV__)    ((__PREDIV__) <= (uint32_t)0x7FFF)
+#define IS_RTC_HOUR12(__HOUR__)            (((__HOUR__) > (uint32_t)0) && ((__HOUR__) <= (uint32_t)12))
+#define IS_RTC_HOUR24(__HOUR__)            ((__HOUR__) <= (uint32_t)23)
+#define IS_RTC_MINUTES(__MINUTES__)        ((__MINUTES__) <= (uint32_t)59)
+#define IS_RTC_SECONDS(__SECONDS__)        ((__SECONDS__) <= (uint32_t)59)
+#define IS_RTC_HOURFORMAT12(__PM__)  (((__PM__) == RTC_HOURFORMAT12_AM) || ((__PM__) == RTC_HOURFORMAT12_PM))
+#define IS_RTC_DAYLIGHT_SAVING(__SAVE__) (((__SAVE__) == RTC_DAYLIGHTSAVING_SUB1H) || \
+                                          ((__SAVE__) == RTC_DAYLIGHTSAVING_ADD1H) || \
+                                          ((__SAVE__) == RTC_DAYLIGHTSAVING_NONE))
+#define IS_RTC_STORE_OPERATION(__OPERATION__) (((__OPERATION__) == RTC_STOREOPERATION_RESET) || \
+                                               ((__OPERATION__) == RTC_STOREOPERATION_SET))
+#define IS_RTC_FORMAT(__FORMAT__) (((__FORMAT__) == RTC_FORMAT_BIN) || ((__FORMAT__) == RTC_FORMAT_BCD))
+#define IS_RTC_YEAR(__YEAR__)              ((__YEAR__) <= (uint32_t)99)
+#define IS_RTC_MONTH(__MONTH__)            (((__MONTH__) >= (uint32_t)1) && ((__MONTH__) <= (uint32_t)12))
+#define IS_RTC_DATE(__DATE__)              (((__DATE__) >= (uint32_t)1) && ((__DATE__) <= (uint32_t)31))
+#define IS_RTC_WEEKDAY(__WEEKDAY__) (((__WEEKDAY__) == RTC_WEEKDAY_MONDAY)    || \
+                                     ((__WEEKDAY__) == RTC_WEEKDAY_TUESDAY)   || \
+                                     ((__WEEKDAY__) == RTC_WEEKDAY_WEDNESDAY) || \
+                                     ((__WEEKDAY__) == RTC_WEEKDAY_THURSDAY)  || \
+                                     ((__WEEKDAY__) == RTC_WEEKDAY_FRIDAY)    || \
+                                     ((__WEEKDAY__) == RTC_WEEKDAY_SATURDAY)  || \
+                                     ((__WEEKDAY__) == RTC_WEEKDAY_SUNDAY))
+
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(__DATE__) (((__DATE__) >(uint32_t) 0) && ((__DATE__) <= (uint32_t)31))
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(__WEEKDAY__) (((__WEEKDAY__) == RTC_WEEKDAY_MONDAY)    || \
+                                                        ((__WEEKDAY__) == RTC_WEEKDAY_TUESDAY)   || \
+                                                        ((__WEEKDAY__) == RTC_WEEKDAY_WEDNESDAY) || \
+                                                        ((__WEEKDAY__) == RTC_WEEKDAY_THURSDAY)  || \
+                                                        ((__WEEKDAY__) == RTC_WEEKDAY_FRIDAY)    || \
+                                                        ((__WEEKDAY__) == RTC_WEEKDAY_SATURDAY)  || \
+                                                        ((__WEEKDAY__) == RTC_WEEKDAY_SUNDAY))
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(__SEL__) (((__SEL__) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+                                                ((__SEL__) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+#define IS_RTC_ALARM_MASK(__MASK__)  (((__MASK__) & 0x7F7F7F7F) == (uint32_t)RESET)
+#define IS_RTC_ALARM(__ALARM__)      (((__ALARM__) == RTC_ALARM_A) || ((__ALARM__) == RTC_ALARM_B))
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(__VALUE__) ((__VALUE__) <= (uint32_t)0x00007FFF)
+#define IS_RTC_ALARM_SUB_SECOND_MASK(__MASK__)   (((__MASK__) == RTC_ALARMSUBSECONDMASK_ALL) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_SS14) || \
+                                                  ((__MASK__) == RTC_ALARMSUBSECONDMASK_NONE))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RTC_Private_Functions RTC Private Functions
+  * @{
+  */
+HAL_StatusTypeDef  RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
+uint8_t            RTC_ByteToBcd2(uint8_t Value);
+uint8_t            RTC_Bcd2ToByte(uint8_t Value);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_rtc_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1831 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_rtc_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   RTC HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Real Time Clock (RTC) Extension peripheral:
+  *           + RTC Time Stamp functions
+  *           + RTC Tamper functions 
+  *           + RTC Wake-up functions
+  *           + Extension Control functions
+  *           + Extension RTC features functions    
+  *         
+  @verbatim
+  ==============================================================================
+                  ##### How to use this driver #####
+  ==============================================================================
+  [..] 
+    (+) Enable the RTC domain access.
+    (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour 
+        format using the HAL_RTC_Init() function.
+  
+  *** RTC Wakeup configuration ***
+  ================================
+  [..] 
+    (+) To configure the RTC Wakeup Clock source and Counter use the HAL_RTC_SetWakeUpTimer()
+        function. You can also configure the RTC Wakeup timer in interrupt mode 
+        using the HAL_RTC_SetWakeUpTimer_IT() function.
+    (+) To read the RTC WakeUp Counter register, use the HAL_RTC_GetWakeUpTimer() 
+        function.
+  
+  *** TimeStamp configuration ***
+  ===============================
+  [..]
+    (+) Enables the RTC TimeStamp using the HAL_RTC_SetTimeStamp() function.
+        You can also configure the RTC TimeStamp with interrupt mode using the
+        HAL_RTC_SetTimeStamp_IT() function.
+    (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTC_GetTimeStamp()
+        function.
+
+  *** Internal TimeStamp configuration ***
+  ===============================
+  [..]
+    (+) Enables the RTC internal TimeStamp using the HAL_RTC_SetInternalTimeStamp() function.
+    (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTC_GetTimeStamp()
+        function.
+  
+  *** Tamper configuration ***
+  ============================
+  [..]
+    (+) Enable the RTC Tamper and Configure the Tamper filter count, trigger Edge 
+        or Level according to the Tamper filter (if equal to 0 Edge else Level) 
+        value, sampling frequency, NoErase, MaskFlag,  precharge or discharge and
+        Pull-UP using the HAL_RTC_SetTamper() function. You can configure RTC Tamper
+        with interrupt mode using HAL_RTC_SetTamper_IT() function.
+    (+) The default configuration of the Tamper erases the backup registers. To avoid
+        erase, enable the NoErase field on the RTC_TAMPCR register.
+  
+  *** Backup Data Registers configuration ***
+  ===========================================
+  [..]
+    (+) To write to the RTC Backup Data registers, use the HAL_RTC_BKUPWrite()
+        function.  
+    (+) To read the RTC Backup Data registers, use the HAL_RTC_BKUPRead()
+        function.
+     
+   @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup RTCEx RTCEx 
+  * @brief RTC Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+  * @{
+  */
+  
+
+/** @defgroup RTCEx_Group1 RTC TimeStamp and Tamper functions
+ *  @brief   RTC TimeStamp and Tamper functions
+ *
+@verbatim   
+ ===============================================================================
+                 ##### RTC TimeStamp and Tamper functions #####
+ ===============================================================================  
+ 
+ [..] This section provides functions allowing to configure TimeStamp feature
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sets TimeStamp.
+  * @note   This API must be called before enabling the TimeStamp feature. 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  TimeStampEdge: Specifies the pin edge on which the TimeStamp is 
+  *         activated.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the  
+  *                                        rising edge of the related pin.
+  *             @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the 
+  *                                         falling edge of the related pin.
+  * @param  RTC_TimeStampPin: specifies the RTC TimeStamp Pin.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_TIMESTAMPPIN_PC13: PC13 is selected as RTC TimeStamp Pin.
+  *             @arg RTC_TIMESTAMPPIN_PI8: PI8 is selected as RTC TimeStamp Pin.  
+  *             @arg RTC_TIMESTAMPPIN_PC1: PC1 is selected as RTC TimeStamp Pin.   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
+  assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+  
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Get the RTC_CR register and clear the bits to be configured */
+  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+    
+  tmpreg|= TimeStampEdge;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  hrtc->Instance->OR &= (uint32_t)~RTC_OR_TSINSEL;
+  hrtc->Instance->OR |= (uint32_t)(RTC_TimeStampPin); 
+  
+  /* Configure the Time Stamp TSEDGE and Enable bits */
+  hrtc->Instance->CR = (uint32_t)tmpreg;
+  
+  __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);    
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets TimeStamp with Interrupt. 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @note   This API must be called before enabling the TimeStamp feature.
+  * @param  TimeStampEdge: Specifies the pin edge on which the TimeStamp is 
+  *         activated.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the  
+  *                                        rising edge of the related pin.
+  *             @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the 
+  *                                         falling edge of the related pin.
+  * @param  RTC_TimeStampPin: Specifies the RTC TimeStamp Pin.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_TIMESTAMPPIN_PC13: PC13 is selected as RTC TimeStamp Pin.
+  *             @arg RTC_TIMESTAMPPIN_PI8: PI8 is selected as RTC TimeStamp Pin.  
+  *             @arg RTC_TIMESTAMPPIN_PC1: PC1 is selected as RTC TimeStamp Pin.   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
+  assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
+  
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Get the RTC_CR register and clear the bits to be configured */
+  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+  
+  tmpreg |= TimeStampEdge;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* Configure the Time Stamp TSEDGE and Enable bits */
+  hrtc->Instance->CR = (uint32_t)tmpreg;
+  
+  hrtc->Instance->OR &= (uint32_t)~RTC_OR_TSINSEL;
+  hrtc->Instance->OR |= (uint32_t)(RTC_TimeStampPin); 
+  
+  __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
+  
+  /* Enable IT timestamp */ 
+  __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc,RTC_IT_TS);
+  
+  /* RTC timestamp Interrupt Configuration: EXTI configuration */
+  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
+  
+  EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);  
+  
+  hrtc->State = HAL_RTC_STATE_READY;  
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates TimeStamp. 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* In case of interrupt mode is used, the interrupt source must disabled */ 
+  __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS);
+  
+  /* Get the RTC_CR register and clear the bits to be configured */
+  tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
+  
+  /* Configure the Time Stamp TSEDGE and Enable bits */
+  hrtc->Instance->CR = (uint32_t)tmpreg;
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+ 
+  hrtc->State = HAL_RTC_STATE_READY;  
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets Internal TimeStamp.
+  * @note   This API must be called before enabling the internal TimeStamp feature.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Configure the internal Time Stamp Enable bits */
+  __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(hrtc);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates internal TimeStamp.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Configure the internal Time Stamp Enable bits */
+  __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(hrtc);
+
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hrtc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Gets the RTC TimeStamp value.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTimeStamp: Pointer to Time structure
+  * @param  sTimeStampDate: Pointer to Date structure  
+  * @param  Format: specifies the format of the entered parameters.
+  *          This parameter can be one of the following values:
+  *             FORMAT_BIN: Binary data format 
+  *             FORMAT_BCD: BCD data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef* sTimeStamp, RTC_DateTypeDef* sTimeStampDate, uint32_t Format)
+{
+  uint32_t tmptime = 0, tmpdate = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_FORMAT(Format));
+
+  /* Get the TimeStamp time and date registers values */
+  tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK);
+  tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK);
+
+  /* Fill the Time structure fields with the read parameters */
+  sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16);
+  sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8);
+  sTimeStamp->Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU));
+  sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16);  
+  sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR;
+  
+  /* Fill the Date structure fields with the read parameters */
+  sTimeStampDate->Year = 0;
+  sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8);
+  sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU));
+  sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13);
+
+  /* Check the input parameters format */
+  if(Format == RTC_FORMAT_BIN)
+  {
+    /* Convert the TimeStamp structure parameters to Binary format */
+    sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours);
+    sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes);
+    sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds);
+    
+    /* Convert the DateTimeStamp structure parameters to Binary format */
+    sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month);
+    sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date);
+    sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay);
+  }
+  
+  /* Clear the TIMESTAMP Flag */
+  __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
+    
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets Tamper
+  * @note   By calling this API we disable the tamper interrupt for all tampers. 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTamper: Pointer to Tamper Structure.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_TAMPER(sTamper->Tamper)); 
+  assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
+  assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase));
+  assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag));
+  assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
+  assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));         
+  assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+  assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+  assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+ 
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+    
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
+  { 
+    sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1); 
+  } 
+  
+  if(sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE)
+  { 
+    sTamper->NoErase = 0;
+    if((sTamper->Tamper & RTC_TAMPER_1) != 0)
+    {
+      sTamper->NoErase |= RTC_TAMPCR_TAMP1NOERASE;
+    }
+    if((sTamper->Tamper & RTC_TAMPER_2) != 0)
+    {
+      sTamper->NoErase |= RTC_TAMPCR_TAMP2NOERASE;
+    }
+    if((sTamper->Tamper & RTC_TAMPER_3) != 0)
+    {
+      sTamper->NoErase |= RTC_TAMPCR_TAMP3NOERASE;
+    }
+  }
+
+  if(sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE)
+  {
+    sTamper->MaskFlag = 0;
+    if((sTamper->Tamper & RTC_TAMPER_1) != 0)
+    {
+      sTamper->MaskFlag |= RTC_TAMPCR_TAMP1MF;
+    }
+    if((sTamper->Tamper & RTC_TAMPER_2) != 0)
+    {
+      sTamper->MaskFlag |= RTC_TAMPCR_TAMP2MF;
+    }
+    if((sTamper->Tamper & RTC_TAMPER_3) != 0)
+    {
+      sTamper->MaskFlag |= RTC_TAMPCR_TAMP3MF;
+    }
+  }
+  
+  tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger  | (uint32_t)sTamper->NoErase |\
+            (uint32_t)sTamper->MaskFlag | (uint32_t)sTamper->Filter | (uint32_t)sTamper->SamplingFrequency |\
+            (uint32_t)sTamper->PrechargeDuration | (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
+
+  hrtc->Instance->TAMPCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1) | (uint32_t)RTC_TAMPCR_TAMPTS |\
+                                       (uint32_t)RTC_TAMPCR_TAMPFREQ | (uint32_t)RTC_TAMPCR_TAMPFLT | (uint32_t)RTC_TAMPCR_TAMPPRCH |\
+                                       (uint32_t)RTC_TAMPCR_TAMPPUDIS | (uint32_t)RTC_TAMPCR_TAMPIE | (uint32_t)RTC_TAMPCR_TAMP1IE |\
+                                       (uint32_t)RTC_TAMPCR_TAMP2IE | (uint32_t)RTC_TAMPCR_TAMP3IE | (uint32_t)RTC_TAMPCR_TAMP1NOERASE |\
+                                       (uint32_t)RTC_TAMPCR_TAMP2NOERASE | (uint32_t)RTC_TAMPCR_TAMP3NOERASE | (uint32_t)RTC_TAMPCR_TAMP1MF |\
+                                       (uint32_t)RTC_TAMPCR_TAMP2MF | (uint32_t)RTC_TAMPCR_TAMP3MF);
+
+  hrtc->Instance->TAMPCR |= tmpreg;      
+      
+  hrtc->State = HAL_RTC_STATE_READY; 
+
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+    
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets Tamper with interrupt.
+  * @note   By calling this API we force the tamper interrupt for all tampers.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  sTamper: Pointer to RTC Tamper.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_TAMPER(sTamper->Tamper)); 
+  assert_param(IS_RTC_TAMPER_INTERRUPT(sTamper->Interrupt));
+  assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
+  assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase));
+  assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag));
+  assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
+  assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));         
+  assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
+  assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
+  assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
+ 
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+      
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Configure the tamper trigger */
+  if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
+  { 
+    sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1); 
+  } 
+  
+  if(sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE)
+  { 
+    sTamper->NoErase = 0;
+    if((sTamper->Tamper & RTC_TAMPER_1) != 0)
+    {
+      sTamper->NoErase |= RTC_TAMPCR_TAMP1NOERASE;
+    }
+    if((sTamper->Tamper & RTC_TAMPER_2) != 0)
+    {
+      sTamper->NoErase |= RTC_TAMPCR_TAMP2NOERASE;
+    }
+    if((sTamper->Tamper & RTC_TAMPER_3) != 0)
+    {
+      sTamper->NoErase |= RTC_TAMPCR_TAMP3NOERASE;
+    }
+  }
+
+  if(sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE)
+  {
+    sTamper->MaskFlag = 0;
+    if((sTamper->Tamper & RTC_TAMPER_1) != 0)
+    {
+      sTamper->MaskFlag |= RTC_TAMPCR_TAMP1MF;
+    }
+    if((sTamper->Tamper & RTC_TAMPER_2) != 0)
+    {
+      sTamper->MaskFlag |= RTC_TAMPCR_TAMP2MF;
+    }
+    if((sTamper->Tamper & RTC_TAMPER_3) != 0)
+    {
+      sTamper->MaskFlag |= RTC_TAMPCR_TAMP3MF;
+    }
+  }
+  
+  tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Interrupt | (uint32_t)sTamper->Trigger  | (uint32_t)sTamper->NoErase |\
+            (uint32_t)sTamper->MaskFlag | (uint32_t)sTamper->Filter | (uint32_t)sTamper->SamplingFrequency |\
+            (uint32_t)sTamper->PrechargeDuration | (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
+  
+  hrtc->Instance->TAMPCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1) | (uint32_t)RTC_TAMPCR_TAMPTS |\
+                                       (uint32_t)RTC_TAMPCR_TAMPFREQ | (uint32_t)RTC_TAMPCR_TAMPFLT | (uint32_t)RTC_TAMPCR_TAMPPRCH |\
+                                       (uint32_t)RTC_TAMPCR_TAMPPUDIS | (uint32_t)RTC_TAMPCR_TAMPIE | (uint32_t)RTC_TAMPCR_TAMP1IE |\
+                                       (uint32_t)RTC_TAMPCR_TAMP2IE | (uint32_t)RTC_TAMPCR_TAMP3IE | (uint32_t)RTC_TAMPCR_TAMP1NOERASE |\
+                                       (uint32_t)RTC_TAMPCR_TAMP2NOERASE | (uint32_t)RTC_TAMPCR_TAMP3NOERASE | (uint32_t)RTC_TAMPCR_TAMP1MF |\
+                                       (uint32_t)RTC_TAMPCR_TAMP2MF | (uint32_t)RTC_TAMPCR_TAMP3MF);
+
+  hrtc->Instance->TAMPCR |= tmpreg;
+
+  /* RTC Tamper Interrupt Configuration: EXTI configuration */
+  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
+
+  EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
+  
+  hrtc->State = HAL_RTC_STATE_READY;   
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates Tamper.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Tamper: Selected tamper pin.
+  *          This parameter can be RTC_Tamper_1 and/or RTC_TAMPER_2.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper)
+{
+  assert_param(IS_RTC_TAMPER(Tamper)); 
+  
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+      
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+/* Disable the selected Tamper pin */
+  hrtc->Instance->TAMPCR &= (uint32_t)~Tamper;
+
+  if ((Tamper & RTC_TAMPER_1) != 0)
+  {
+    /* Disable the Tamper1 interrupt */
+    hrtc->Instance->TAMPCR &= (uint32_t)~(RTC_IT_TAMP | RTC_IT_TAMP1);
+  }
+  if ((Tamper & RTC_TAMPER_2) != 0)
+  {
+    /* Disable the Tamper2 interrupt */
+    hrtc->Instance->TAMPCR &= (uint32_t)~(RTC_IT_TAMP | RTC_IT_TAMP2);
+  }
+  if ((Tamper & RTC_TAMPER_3) != 0)
+  {
+    /* Disable the Tamper2 interrupt */
+    hrtc->Instance->TAMPCR &= (uint32_t)~(RTC_IT_TAMP | RTC_IT_TAMP3);
+  } 
+  
+  hrtc->State = HAL_RTC_STATE_READY;   
+  
+  /* Process Unlocked */  
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK; 
+}
+
+/**
+  * @brief  This function handles TimeStamp interrupt request.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc)
+{  
+  if(__HAL_RTC_TIMESTAMP_GET_IT(hrtc, RTC_IT_TS))
+  {
+    /* Get the status of the Interrupt */
+    if((uint32_t)(hrtc->Instance->CR & RTC_IT_TS) != (uint32_t)RESET)
+    {
+       /* TIMESTAMP callback */ 
+        HAL_RTCEx_TimeStampEventCallback(hrtc);
+
+      /* Clear the TIMESTAMP interrupt pending bit */
+      __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc,RTC_FLAG_TSF);
+    }
+  }
+
+  /* Get the status of the Interrupt */
+  if(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F)== SET)
+  {
+    /* Get the TAMPER Interrupt enable bit and pending bit */
+    if((((hrtc->Instance->TAMPCR & RTC_TAMPCR_TAMPIE)) != (uint32_t)RESET) || \
+       (((hrtc->Instance->TAMPCR & RTC_TAMPCR_TAMP1IE)) != (uint32_t)RESET))
+    {
+      /* Tamper callback */
+      HAL_RTCEx_Tamper1EventCallback(hrtc);
+
+      /* Clear the Tamper interrupt pending bit */
+      __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
+    }
+  }
+
+  /* Get the status of the Interrupt */
+  if(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F)== SET)
+  {
+    /* Get the TAMPER Interrupt enable bit and pending bit */
+    if((((hrtc->Instance->TAMPCR & RTC_TAMPCR_TAMPIE)) != (uint32_t)RESET) || \
+       (((hrtc->Instance->TAMPCR & RTC_TAMPCR_TAMP2IE)) != (uint32_t)RESET))
+    {
+      /* Tamper callback */
+      HAL_RTCEx_Tamper2EventCallback(hrtc);
+
+      /* Clear the Tamper interrupt pending bit */
+      __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
+    }
+  }
+
+  /* Get the status of the Interrupt */
+  if(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP3F)== SET)
+  {
+    /* Get the TAMPER Interrupt enable bit and pending bit */
+    if((((hrtc->Instance->TAMPCR & RTC_TAMPCR_TAMPIE)) != (uint32_t)RESET) || \
+       (((hrtc->Instance->TAMPCR & RTC_TAMPCR_TAMP3IE)) != (uint32_t)RESET))
+    {
+      /* Tamper callback */
+      HAL_RTCEx_Tamper3EventCallback(hrtc);
+
+      /* Clear the Tamper interrupt pending bit */
+      __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP3F);
+    }
+  }
+  
+  /* Clear the EXTI's Flag for RTC TimeStamp and Tamper */
+  __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG();
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+  * @brief  TimeStamp callback. 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_TimeStampEventCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief  Tamper 1 callback. 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_Tamper1EventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tamper 2 callback. 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_Tamper2EventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Tamper 3 callback. 
+  * @param  hrtc: RTC handle
+  * @retval None
+  */
+__weak void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTCEx_Tamper3EventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  This function handles TimeStamp polling request.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{ 
+  uint32_t tickstart = 0; 
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == RESET)
+  {	        
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+	
+  if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != RESET)
+  {
+    /* Clear the TIMESTAMP OverRun Flag */
+    __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);
+      
+    /* Change TIMESTAMP state */
+    hrtc->State = HAL_RTC_STATE_ERROR; 
+      
+    return HAL_ERROR; 
+   }
+	
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  return HAL_OK; 
+}
+  
+/**
+  * @brief  This function handles Tamper1 Polling.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{  
+  uint32_t tickstart = 0; 
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  /* Get the status of the Interrupt */
+  while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F)== RESET)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Clear the Tamper Flag */
+  __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+  
+  return HAL_OK; 
+}
+
+/**
+  * @brief  This function handles Tamper2 Polling.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{  
+  uint32_t tickstart = 0; 
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+  
+  /* Get the status of the Interrupt */
+  while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) == RESET)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Clear the Tamper Flag */
+  __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP2F);
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles Tamper3 Polling.
+  * @param  hrtc: RTC handle
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{
+  uint32_t tickstart = HAL_GetTick();
+
+  /* Get the status of the Interrupt */
+  while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP3F) == RESET)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  /* Clear the Tamper Flag */
+  __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP3F);
+
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup RTCEx_Group2 RTC Wake-up functions
+ *  @brief   RTC Wake-up functions
+ *
+@verbatim   
+ ===============================================================================
+                        ##### RTC Wake-up functions #####
+ ===============================================================================  
+ 
+ [..] This section provides functions allowing to configure Wake-up feature
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sets wake up timer. 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  WakeUpCounter: Wake up counter
+  * @param  WakeUpClock: Wake up clock  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
+  assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
+ 
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+    
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /*Check RTC WUTWF flag is reset only when wake up timer enabled*/
+  if((hrtc->Instance->CR & RTC_CR_WUTE) != RESET)
+  {
+    /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+      
+        hrtc->State = HAL_RTC_STATE_TIMEOUT; 
+      
+        /* Process Unlocked */ 
+        __HAL_UNLOCK(hrtc);
+      
+        return HAL_TIMEOUT;
+      }  
+    }
+  }
+  
+  /* Clear the Wakeup Timer clock source bits in CR register */
+  hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+  
+  /* Configure the clock source */
+  hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+  
+  /* Configure the Wakeup Timer counter */
+  hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+  
+   /* Enable the Wakeup Timer */
+  __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);   
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); 
+  
+  hrtc->State = HAL_RTC_STATE_READY;   
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sets wake up timer with interrupt
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  WakeUpCounter: Wake up counter
+  * @param  WakeUpClock: Wake up clock  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
+{
+  uint32_t tickstart = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
+  assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
+  
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+    /*Check RTC WUTWF flag is reset only when wake up timer enabled*/
+  if((hrtc->Instance->CR & RTC_CR_WUTE) != RESET)
+  {
+    /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+    while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+       
+        hrtc->State = HAL_RTC_STATE_TIMEOUT; 
+      
+        /* Process Unlocked */ 
+        __HAL_UNLOCK(hrtc);
+      
+        return HAL_TIMEOUT;
+      }  
+    }
+  }
+  
+  /* Configure the Wakeup Timer counter */
+  hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
+
+  /* Clear the Wakeup Timer clock source bits in CR register */
+  hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
+
+  /* Configure the clock source */
+  hrtc->Instance->CR |= (uint32_t)WakeUpClock;
+  
+  /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */
+  __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT();
+  
+  EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT;
+  
+  /* Configure the Interrupt in the RTC_CR register */
+  __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc,RTC_IT_WUT);
+  
+  /* Enable the Wakeup Timer */
+  __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
+    
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); 
+  
+  hrtc->State = HAL_RTC_STATE_READY;   
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+ 
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates wake up timer counter.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC. 
+  * @retval HAL status
+  */
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+  uint32_t tickstart = 0;
+  
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* Disable the Wakeup Timer */
+  __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
+  
+  /* In case of interrupt mode is used, the interrupt source must disabled */ 
+  __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc,RTC_IT_WUT);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
+  while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
+  {
+    if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+    {
+      /* Enable the write protection for RTC registers */
+      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+      
+      hrtc->State = HAL_RTC_STATE_TIMEOUT; 
+      
+      /* Process Unlocked */ 
+      __HAL_UNLOCK(hrtc);
+      
+      return HAL_TIMEOUT;
+    }   
+  }
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_READY;   
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Gets wake up timer counter.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC. 
+  * @retval Counter value
+  */
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc)
+{
+  /* Get the counter value */
+  return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT)); 
+}
+
+/**
+  * @brief  This function handles Wake Up Timer interrupt request.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc)
+{  
+  if(__HAL_RTC_WAKEUPTIMER_GET_IT(hrtc, RTC_IT_WUT))
+  {
+    /* Get the status of the Interrupt */
+    if((uint32_t)(hrtc->Instance->CR & RTC_IT_WUT) != (uint32_t)RESET)
+    {
+      /* WAKEUPTIMER callback */ 
+      HAL_RTCEx_WakeUpTimerEventCallback(hrtc);
+      
+      /* Clear the WAKEUPTIMER interrupt pending bit */
+      __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+    }
+  }
+  
+  /* Clear the EXTI's line Flag for RTC WakeUpTimer */
+  __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG();
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+}
+
+/**
+  * @brief  Wake Up Timer callback.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_WakeUpTimerEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  This function handles Wake Up Timer Polling.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{  
+  uint32_t tickstart = 0; 
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == RESET)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+      
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Clear the WAKEUPTIMER Flag */
+  __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY;
+  
+  return HAL_OK; 
+}
+
+/**
+  * @}
+  */
+
+
+/** @defgroup RTCEx_Group3 Extension Peripheral Control functions 
+ *  @brief   Extension Peripheral Control functions 
+ *
+@verbatim   
+ ===============================================================================
+              ##### Extension Peripheral Control functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides functions allowing to
+      (+) Write a data in a specified RTC Backup data register
+      (+) Read a data in a specified RTC Backup data register
+      (+) Set the Coarse calibration parameters.
+      (+) Deactivate the Coarse calibration parameters
+      (+) Set the Smooth calibration parameters.
+      (+) Configure the Synchronization Shift Control Settings.
+      (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+      (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+      (+) Enable the RTC reference clock detection.
+      (+) Disable the RTC reference clock detection.
+      (+) Enable the Bypass Shadow feature.
+      (+) Disable the Bypass Shadow feature.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Writes a data in a specified RTC Backup data register.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC. 
+  * @param  BackupRegister: RTC Backup data Register number.
+  *          This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to 
+  *                                 specify the register.
+  * @param  Data: Data to be written in the specified RTC Backup data register.                     
+  * @retval None
+  */
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data)
+{
+  uint32_t tmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_BKP(BackupRegister));
+  
+  tmp = (uint32_t)&(hrtc->Instance->BKP0R);
+  tmp += (BackupRegister * 4);
+  
+  /* Write the specified register */
+  *(__IO uint32_t *)tmp = (uint32_t)Data;
+}
+
+/**
+  * @brief  Reads data from the specified RTC Backup data Register.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC. 
+  * @param  BackupRegister: RTC Backup data Register number.
+  *          This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to 
+  *                                 specify the register.                   
+  * @retval Read value
+  */
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister)
+{
+  uint32_t tmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_BKP(BackupRegister));
+
+  tmp = (uint32_t)&(hrtc->Instance->BKP0R);
+  tmp += (BackupRegister * 4);
+  
+  /* Read the specified register */
+  return (*(__IO uint32_t *)tmp);
+}
+
+/**
+  * @brief  Sets the Smooth calibration parameters.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.  
+  * @param  SmoothCalibPeriod: Select the Smooth Calibration Period.
+  *          This parameter can be can be one of the following values :
+  *             @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s.
+  *             @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s.
+  *             @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s.
+  * @param  SmoothCalibPlusPulses: Select to Set or reset the CALP bit.
+  *          This parameter can be one of the following values:
+  *             @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulses every 2*11 pulses.
+  *             @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added.
+  * @param  SmouthCalibMinusPulsesValue: Select the value of CALM[8:0] bits.
+  *          This parameter can be one any value from 0 to 0x000001FF.
+  * @note   To deactivate the smooth calibration, the field SmoothCalibPlusPulses 
+  *         must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field 
+  *         SmouthCalibMinusPulsesValue must be equal to 0.  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue)
+{
+  uint32_t tickstart = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod));
+  assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses));
+  assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmouthCalibMinusPulsesValue));
+  
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* check if a calibration is pending*/
+  if((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
+  {
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+    /* check if a calibration is pending*/
+    while((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+        
+        /* Change RTC state */
+        hrtc->State = HAL_RTC_STATE_TIMEOUT; 
+        
+        /* Process Unlocked */ 
+        __HAL_UNLOCK(hrtc);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Configure the Smooth calibration settings */
+  hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmouthCalibMinusPulsesValue);
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the Synchronization Shift Control Settings.
+  * @note   When REFCKON is set, firmware must not write to Shift control register. 
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.    
+  * @param  ShiftAdd1S: Select to add or not 1 second to the time calendar.
+  *          This parameter can be one of the following values :
+  *             @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar. 
+  *             @arg RTC_SHIFTADD1S_RESET: No effect.
+  * @param  ShiftSubFS: Select the number of Second Fractions to substitute.
+  *          This parameter can be one any value from 0 to 0x7FFF.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef* hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S));
+  assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS));
+
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+    /* Wait until the shift is completed*/
+    while((hrtc->Instance->ISR & RTC_ISR_SHPF) != RESET)
+    {
+      if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
+      {  
+        /* Enable the write protection for RTC registers */
+        __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);  
+        
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        
+        /* Process Unlocked */ 
+        __HAL_UNLOCK(hrtc);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  
+    /* Check if the reference clock detection is disabled */
+    if((hrtc->Instance->CR & RTC_CR_REFCKON) == RESET)
+    {
+      /* Configure the Shift settings */
+      hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S);
+      
+      /* If  RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
+      if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
+      {
+        if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
+        {
+          /* Enable the write protection for RTC registers */
+          __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);  
+          
+          hrtc->State = HAL_RTC_STATE_ERROR;
+          
+          /* Process Unlocked */ 
+          __HAL_UNLOCK(hrtc);
+          
+          return HAL_ERROR;
+        }
+      }
+    }
+    else
+    {
+      /* Enable the write protection for RTC registers */
+      __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+      
+      /* Change RTC state */
+      hrtc->State = HAL_RTC_STATE_ERROR; 
+      
+      /* Process Unlocked */ 
+      __HAL_UNLOCK(hrtc);
+      
+      return HAL_ERROR;
+    }
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.    
+  * @param  CalibOutput: Select the Calibration output Selection .
+  *          This parameter can be one of the following values:
+  *             @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz. 
+  *             @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc, uint32_t CalibOutput)
+{
+  /* Check the parameters */
+  assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput));
+  
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* Clear flags before config */
+  hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL;
+  
+  /* Configure the RTC_CR register */
+  hrtc->Instance->CR |= (uint32_t)CalibOutput;
+  
+  __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc);
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef* hrtc)
+{
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc);
+    
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the RTC reference clock detection.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef* hrtc)
+{
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); 
+    
+    /* Set RTC state*/
+    hrtc->State = HAL_RTC_STATE_ERROR;
+    
+    /* Process Unlocked */ 
+    __HAL_UNLOCK(hrtc);
+    
+    return HAL_ERROR;
+  } 
+  else
+  {
+    __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc);
+
+    /* Exit Initialization mode */
+    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; 
+  }
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+  
+   /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disable the RTC reference clock detection.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef* hrtc)
+{ 
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* Set Initialization mode */
+  if(RTC_EnterInitMode(hrtc) != HAL_OK)
+  {
+    /* Enable the write protection for RTC registers */
+    __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); 
+    
+    /* Set RTC state*/
+    hrtc->State = HAL_RTC_STATE_ERROR;
+    
+    /* Process Unlocked */ 
+    __HAL_UNLOCK(hrtc);
+    
+    return HAL_ERROR;
+  } 
+  else
+  {
+    __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc);
+    
+    /* Exit Initialization mode */
+    hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; 
+  }
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the Bypass Shadow feature.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.  
+  * @note   When the Bypass Shadow is enabled the calendar value are taken 
+  *         directly from the Calendar counter.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef* hrtc)
+{
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* Set the BYPSHAD bit */
+  hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD;
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Disables the Bypass Shadow feature.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.  
+  * @note   When the Bypass Shadow is enabled the calendar value are taken 
+  *         directly from the Calendar counter.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef* hrtc)
+{
+  /* Process Locked */ 
+  __HAL_LOCK(hrtc);
+  
+  hrtc->State = HAL_RTC_STATE_BUSY;
+  
+  /* Disable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
+  
+  /* Reset the BYPSHAD bit */
+  hrtc->Instance->CR &= (uint8_t)~RTC_CR_BYPSHAD;
+  
+  /* Enable the write protection for RTC registers */
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  /* Process Unlocked */ 
+  __HAL_UNLOCK(hrtc);
+  
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+  /** @defgroup RTCEx_Group4 Extended features functions 
+ *  @brief    Extended features functions  
+ *
+@verbatim   
+ ===============================================================================
+                 ##### Extended features functions #####
+ ===============================================================================  
+    [..]  This section provides functions allowing to:
+      (+) RTC Alram B callback
+      (+) RTC Poll for Alarm B request
+               
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Alarm B callback.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @retval None
+  */
+__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hrtc);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_RTC_AlarmBEventCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  This function handles AlarmB Polling request.
+  * @param  hrtc: pointer to a RTC_HandleTypeDef structure that contains
+  *                the configuration information for RTC.
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
+{  
+  uint32_t tickstart = 0; 
+
+  /* Get tick */
+  tickstart = HAL_GetTick();
+
+  while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == RESET)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        hrtc->State = HAL_RTC_STATE_TIMEOUT;
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  /* Clear the Alarm Flag */
+  __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+  
+  /* Change RTC state */
+  hrtc->State = HAL_RTC_STATE_READY; 
+  
+  return HAL_OK; 
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_RTC_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_rtc_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1035 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_rtc_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of RTC HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_RTC_EX_H
+#define __STM32F7xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup RTCEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  RTC Tamper structure definition  
+  */
+typedef struct 
+{
+  uint32_t Tamper;                      /*!< Specifies the Tamper Pin.
+                                             This parameter can be a value of @ref  RTCEx_Tamper_Pins_Definitions */
+  
+  uint32_t Interrupt;                   /*!< Specifies the Tamper Interrupt.
+                                             This parameter can be a value of @ref  RTCEx_Tamper_Interrupt_Definitions */                                  
+                                             
+  uint32_t Trigger;                     /*!< Specifies the Tamper Trigger.
+                                             This parameter can be a value of @ref  RTCEx_Tamper_Trigger_Definitions */
+                                             
+  uint32_t NoErase;                     /*!< Specifies the Tamper no erase mode.
+                                             This parameter can be a value of @ref  RTCEx_Tamper_EraseBackUp_Definitions */
+
+  uint32_t MaskFlag;                     /*!< Specifies the Tamper Flag masking.
+                                             This parameter can be a value of @ref RTCEx_Tamper_MaskFlag_Definitions   */
+
+  uint32_t Filter;                      /*!< Specifies the RTC Filter Tamper.
+                                             This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+  
+  uint32_t SamplingFrequency;           /*!< Specifies the sampling frequency.
+                                             This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+                                      
+  uint32_t PrechargeDuration;           /*!< Specifies the Precharge Duration .
+                                             This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ 
+ 
+  uint32_t TamperPullUp;                /*!< Specifies the Tamper PullUp .
+                                             This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */           
+ 
+  uint32_t TimeStampOnTamperDetection;  /*!< Specifies the TimeStampOnTamperDetection.
+                                             This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */                      
+}RTC_TamperTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
+  * @{
+  */
+
+/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output selection Definitions 
+  * @{
+  */ 
+#define RTC_OUTPUT_DISABLE             ((uint32_t)0x00000000)
+#define RTC_OUTPUT_ALARMA              ((uint32_t)0x00200000)
+#define RTC_OUTPUT_ALARMB              ((uint32_t)0x00400000)
+#define RTC_OUTPUT_WAKEUP              ((uint32_t)0x00600000)
+/**
+  * @}
+  */ 
+  
+/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
+  * @{
+  */
+#define RTC_BKP_DR0                       ((uint32_t)0x00000000)
+#define RTC_BKP_DR1                       ((uint32_t)0x00000001)
+#define RTC_BKP_DR2                       ((uint32_t)0x00000002)
+#define RTC_BKP_DR3                       ((uint32_t)0x00000003)
+#define RTC_BKP_DR4                       ((uint32_t)0x00000004)
+#define RTC_BKP_DR5                       ((uint32_t)0x00000005)
+#define RTC_BKP_DR6                       ((uint32_t)0x00000006)
+#define RTC_BKP_DR7                       ((uint32_t)0x00000007)
+#define RTC_BKP_DR8                       ((uint32_t)0x00000008)
+#define RTC_BKP_DR9                       ((uint32_t)0x00000009)
+#define RTC_BKP_DR10                      ((uint32_t)0x0000000A)
+#define RTC_BKP_DR11                      ((uint32_t)0x0000000B)
+#define RTC_BKP_DR12                      ((uint32_t)0x0000000C)
+#define RTC_BKP_DR13                      ((uint32_t)0x0000000D)
+#define RTC_BKP_DR14                      ((uint32_t)0x0000000E)
+#define RTC_BKP_DR15                      ((uint32_t)0x0000000F)
+#define RTC_BKP_DR16                      ((uint32_t)0x00000010)
+#define RTC_BKP_DR17                      ((uint32_t)0x00000011)
+#define RTC_BKP_DR18                      ((uint32_t)0x00000012)
+#define RTC_BKP_DR19                      ((uint32_t)0x00000013)
+#define RTC_BKP_DR20                      ((uint32_t)0x00000014)
+#define RTC_BKP_DR21                      ((uint32_t)0x00000015)
+#define RTC_BKP_DR22                      ((uint32_t)0x00000016)
+#define RTC_BKP_DR23                      ((uint32_t)0x00000017)
+#define RTC_BKP_DR24                      ((uint32_t)0x00000018)
+#define RTC_BKP_DR25                      ((uint32_t)0x00000019)
+#define RTC_BKP_DR26                      ((uint32_t)0x0000001A)
+#define RTC_BKP_DR27                      ((uint32_t)0x0000001B)
+#define RTC_BKP_DR28                      ((uint32_t)0x0000001C)
+#define RTC_BKP_DR29                      ((uint32_t)0x0000001D)
+#define RTC_BKP_DR30                      ((uint32_t)0x0000001E)
+#define RTC_BKP_DR31                      ((uint32_t)0x0000001F)
+/**
+  * @}
+  */ 
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definitions 
+  * @{
+  */ 
+#define RTC_TIMESTAMPEDGE_RISING          ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPEDGE_FALLING         ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+  
+/** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definitions 
+  * @{
+  */ 
+#define RTC_TAMPER_1                    RTC_TAMPCR_TAMP1E
+#define RTC_TAMPER_2                    RTC_TAMPCR_TAMP2E
+#define RTC_TAMPER_3                    RTC_TAMPCR_TAMP3E
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Interrupt_Definitions RTCEx Tamper Interrupt Definitions
+  * @{
+  */
+#define RTC_TAMPER1_INTERRUPT                RTC_TAMPCR_TAMP1IE
+#define RTC_TAMPER2_INTERRUPT                RTC_TAMPCR_TAMP2IE
+#define RTC_TAMPER3_INTERRUPT                RTC_TAMPCR_TAMP3IE
+#define RTC_ALL_TAMPER_INTERRUPT             RTC_TAMPCR_TAMPIE
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selection RTCEx TimeStamp Pin Selection
+  * @{
+  */ 
+#define RTC_TIMESTAMPPIN_DEFAULT            ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPPIN_POS1               ((uint32_t)0x00000002)
+#define RTC_TIMESTAMPPIN_POS2               ((uint32_t)0x00000004)
+/**
+  * @}
+  */ 
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definitions 
+  * @{
+  */ 
+#define RTC_TAMPERTRIGGER_RISINGEDGE       ((uint32_t)0x00000000)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE      ((uint32_t)0x00000002)
+#define RTC_TAMPERTRIGGER_LOWLEVEL         RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL        RTC_TAMPERTRIGGER_FALLINGEDGE 
+/**
+  * @}
+  */  
+
+  /** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTCEx Tamper EraseBackUp Definitions
+* @{
+*/
+#define RTC_TAMPER_ERASE_BACKUP_ENABLE               ((uint32_t)0x00000000)
+#define RTC_TAMPER_ERASE_BACKUP_DISABLE              ((uint32_t)0x00020000)
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTCEx Tamper MaskFlag Definitions
+  * @{
+  */
+#define RTC_TAMPERMASK_FLAG_DISABLE                ((uint32_t)0x00000000)
+#define RTC_TAMPERMASK_FLAG_ENABLE                 ((uint32_t)0x00040000)
+/**
+  * @}
+  */
+  
+/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definitions 
+  * @{
+  */ 
+#define RTC_TAMPERFILTER_DISABLE   ((uint32_t)0x00000000)  /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE   ((uint32_t)0x00000800)  /*!< Tamper is activated after 2 
+                                                                consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE   ((uint32_t)0x00001000)  /*!< Tamper is activated after 4 
+                                                                consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE   ((uint32_t)0x00001800)  /*!< Tamper is activated after 8 
+                                                                consecutive samples at the active leve. */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definitions 
+  * @{
+  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768  ((uint32_t)0x00000000)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384  ((uint32_t)0x00000100)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192   ((uint32_t)0x00000200)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 8192  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096   ((uint32_t)0x00000300)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 4096  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048   ((uint32_t)0x00000400)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 2048  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024   ((uint32_t)0x00000500)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 1024  */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512    ((uint32_t)0x00000600)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 512   */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256    ((uint32_t)0x00000700)  /*!< Each of the tamper inputs are sampled
+                                                                             with a frequency =  RTCCLK / 256   */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definitions 
+  * @{
+  */ 
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000)  /*!< Tamper pins are pre-charged before 
+                                                                         sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000)  /*!< Tamper pins are pre-charged before 
+                                                                         sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000)  /*!< Tamper pins are pre-charged before 
+                                                                         sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000)  /*!< Tamper pins are pre-charged before 
+                                                                         sampling during 8 RTCCLK cycles */
+/**
+  * @}
+  */
+  
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definitions
+  * @{
+  */ 
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE  ((uint32_t)RTC_TAMPCR_TAMPTS)  /*!< TimeStamp on Tamper Detection event saved        */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000)        /*!< TimeStamp on Tamper Detection event is not saved */                                                                      
+/**
+  * @}
+  */
+  
+/** @defgroup  RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definitions
+  * @{
+  */ 
+#define RTC_TAMPER_PULLUP_ENABLE  ((uint32_t)0x00000000)            /*!< TimeStamp on Tamper Detection event saved        */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAMPCR_TAMPPUDIS)   /*!< TimeStamp on Tamper Detection event is not saved */                                                                  
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions 
+  * @{
+  */ 
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16        ((uint32_t)0x00000000)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8         ((uint32_t)0x00000001)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4         ((uint32_t)0x00000002)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2         ((uint32_t)0x00000003)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS      ((uint32_t)0x00000004)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS      ((uint32_t)0x00000006)
+/**
+  * @}
+  */ 
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions 
+  * @{
+  */ 
+#define RTC_SMOOTHCALIB_PERIOD_32SEC   ((uint32_t)0x00000000)  /*!< If RTCCLK = 32768 Hz, Smooth calibration
+                                                                    period is 32s,  else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC   ((uint32_t)0x00002000)  /*!< If RTCCLK = 32768 Hz, Smooth calibration 
+                                                                    period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC    ((uint32_t)0x00004000)  /*!< If RTCCLK = 32768 Hz, Smooth calibration 
+                                                                    period is 8s, else 2exp18 RTCCLK seconds */                                        
+/**
+  * @}
+  */ 
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions 
+  * @{
+  */ 
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET    ((uint32_t)0x00008000)  /*!< The number of RTCCLK pulses added  
+                                                                       during a X -second window = Y - CALM[8:0] 
+                                                                       with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET  ((uint32_t)0x00000000)  /*!< The number of RTCCLK pulses subbstited
+                                                                       during a 32-second window = CALM[8:0] */
+/**
+  * @}
+  */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTCEx Add 1 Second Parameter Definitions
+  * @{
+  */ 
+#define RTC_SHIFTADD1S_RESET      ((uint32_t)0x00000000)
+#define RTC_SHIFTADD1S_SET        ((uint32_t)0x80000000)
+/**
+  * @}
+  */
+
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions
+  * @{
+  */ 
+#define RTC_CALIBOUTPUT_512HZ            ((uint32_t)0x00000000) 
+#define RTC_CALIBOUTPUT_1HZ              ((uint32_t)0x00080000)
+/**
+  * @}
+  */ 
+  
+/**
+  * @}
+  */ 
+  
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
+  * @{
+  */
+
+/**
+  * @brief  Enable the RTC WakeUp Timer peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__)                     ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+
+/**
+  * @brief  Disable the RTC WakeUp Timer peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__)                    ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+
+/**
+  * @brief  Enable the RTC WakeUpTimer interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT: WakeUpTimer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC WakeUpTimer interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT: WakeUpTimer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT:  WakeUpTimer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__)       (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_WUT:  WakeUpTimer interrupt
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)   (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Get the selected RTC WakeUpTimer's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC WakeUpTimer Flag is pending or not.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_WUTF
+  *             @arg RTC_FLAG_WUTWF
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__)   (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Clear the RTC Wake Up timer's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC WakeUpTimer Flag to clear.
+  *         This parameter can be:
+  *            @arg RTC_FLAG_WUTF
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))    
+
+/**
+  * @brief  Enable the RTC Tamper1 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E))
+
+/**
+  * @brief  Disable the RTC Tamper1 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E))
+
+/**
+  * @brief  Enable the RTC Tamper2 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP2E))
+
+/**
+  * @brief  Disable the RTC Tamper2 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP2E))
+
+/**
+  * @brief  Enable the RTC Tamper3 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__)                         ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP3E))
+
+/**
+  * @brief  Disable the RTC Tamper3 input detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__)                        ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E))
+
+/**
+  * @brief  Check whether the specified RTC Tamper interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt to check.
+  *         This parameter can be:
+  *            @arg  RTC_IT_TAMP: All tampers interrupts
+  *            @arg  RTC_IT_TAMP1: Tamper1 interrupt
+  *            @arg  RTC_IT_TAMP2: Tamper2 interrupt
+  *            @arg  RTC_IT_TAMP3: Tamper3 interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__)           (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3)) != RESET) ? SET : RESET) : \
+                                                                      ((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5)) != RESET) ? SET : RESET) : \
+                                                                                                          (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7)) != RESET) ? SET : RESET))
+
+/**
+  * @brief  Check whether the specified RTC Tamper interrupt has been enabled or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
+  *         This parameter can be:
+  *            @arg  RTC_IT_TAMP: All tampers interrupts
+  *            @arg  RTC_IT_TAMP1: Tamper1 interrupt
+  *            @arg  RTC_IT_TAMP2: Tamper2 interrupt
+  *            @arg  RTC_IT_TAMP3: Tamper3 interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)    (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Get the selected RTC Tamper's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Tamper Flag is pending or not.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TAMP1F: Tamper1 flag
+  *             @arg RTC_FLAG_TAMP2F: Tamper2 flag
+  *             @arg RTC_FLAG_TAMP3F: Tamper3 flag
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__)        (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Clear the RTC Tamper's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Tamper Flag sources to clear.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TAMP1F: Tamper1 flag
+  *             @arg RTC_FLAG_TAMP2F: Tamper2 flag
+  *             @arg RTC_FLAG_TAMP3F: Tamper3 flag
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+  * @brief  Enable the RTC TimeStamp peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__)                       ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+  * @brief  Disable the RTC TimeStamp peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__)                      ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+  * @brief  Enable the RTC TimeStamp interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the RTC TimeStamp interrupt.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled. 
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified RTC TimeStamp interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__)        (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Check whether the specified RTC Time Stamp interrupt has been enabled or not.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
+  *         This parameter can be:
+  *            @arg RTC_IT_TS: TimeStamp interrupt
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)     (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Get the selected RTC TimeStamp's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC TimeStamp Flag is pending or not.
+  *         This parameter can be:
+  *            @arg RTC_FLAG_TSF
+  *            @arg RTC_FLAG_TSOVF
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__)     (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Clear the RTC Time Stamp's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Alarm Flag sources to clear.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_TSF
+  *             @arg RTC_FLAG_TSOVF
+  * @retval None
+  */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)   ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+  * @brief  Enable the RTC internal TimeStamp peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR |= (RTC_CR_ITSE))
+
+/**
+  * @brief  Disable the RTC internal TimeStamp peripheral.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__)               ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ITSE))
+
+/**
+  * @brief  Get the selected RTC Internal Time Stamp's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Internal Time Stamp Flag is pending or not.
+  *         This parameter can be:
+  *            @arg RTC_FLAG_ITSF
+  * @retval None
+  */
+#define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__)    (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Clear the RTC Internal Time Stamp's pending flags.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC Internal Time Stamp Flag source to clear.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_ITSF
+  * @retval None
+  */
+#define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__)  ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0003FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+  * @brief  Enable the RTC calibration output.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+  * @brief  Disable the calibration output.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__)               ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+  * @brief  Enable the clock reference detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+  * @brief  Disable the clock reference detection.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @retval None
+  */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__)               ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+  * @brief  Get the selected RTC shift operation's flag status.
+  * @param  __HANDLE__: specifies the RTC handle.
+  * @param  __FLAG__: specifies the RTC shift operation Flag is pending or not.
+  *          This parameter can be:
+  *             @arg RTC_FLAG_SHPF
+  * @retval None
+  */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__)         (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
+
+/**
+  * @brief  Enable interrupt on the RTC WakeUp Timer associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT()       (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable interrupt on the RTC WakeUp Timer associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT()      (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+  * @brief  Enable event on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT()    (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable event on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT()   (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+  * @brief  Enable falling edge trigger on the RTC WakeUp Timer associated Exti line. 
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+  * @brief  Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+  * @brief  Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief  Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+  * @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.
+  * @retval Line Status.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG()              (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief Clear the RTC WakeUp Timer associated Exti line flag.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG()            (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT()         (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+  * @brief  Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()        (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()       (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+  * @brief  Enable event on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT()    (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable event on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT()   (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+  * @brief  Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. 
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE()   (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE()  (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+  * @brief  Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE()    (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief  Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE()   (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+  * @brief  Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+  * @brief  Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+  * This parameter can be:
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+  * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
+  * @retval Line Status.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()         (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()       (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
+  * @retval None.
+  */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()    (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+  * @{
+  */
+
+/** @addtogroup RTCEx_Exported_Functions_Group1
+  * @{
+  */
+
+/* RTC TimeStamp and Tamper functions *****************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void              HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void              HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void              HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+void              HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
+void              HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @addtogroup RTCEx_Exported_Functions_Group2
+  * @{
+  */
+/* RTC Wake-up functions ******************************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t          HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t          HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void              HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void              HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @addtogroup RTCEx_Exported_Functions_Group3
+  * @{
+  */
+/* Extension Control functions ************************************************/
+void              HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t          HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+/**
+  * @}
+  */
+
+/** @addtogroup RTCEx_Exported_Functions_Group4
+  * @{
+  */
+/* Extension RTC features functions *******************************************/
+void              HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); 
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+/* Private types -------------------------------------------------------------*/ 
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
+  * @{
+  */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT  ((uint32_t)EXTI_IMR_MR21)  /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */                                               
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT       ((uint32_t)EXTI_IMR_MR22)  /*!< External interrupt line 22 Connected to the RTC Wake-up event */  
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
+  * @{
+  */
+/* Masks Definition */
+#define RTC_TAMPCR_TAMPXE     ((uint32_t) (RTC_TAMPCR_TAMP3E | RTC_TAMPCR_TAMP2E | RTC_TAMPCR_TAMP1E))
+#define RTC_TAMPCR_TAMPXIE    ((uint32_t) (RTC_TAMPER1_INTERRUPT | RTC_TAMPER2_INTERRUPT | RTC_TAMPER3_INTERRUPT))
+/**
+  * @}
+  */
+  
+/* Private macros ------------------------------------------------------------*/   
+/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
+  * @{
+  */
+
+/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
+  * @{
+  */
+#define IS_RTC_OUTPUT(__OUTPUT__)      (((__OUTPUT__) == RTC_OUTPUT_DISABLE) || \
+                                        ((__OUTPUT__) == RTC_OUTPUT_ALARMA)  || \
+                                        ((__OUTPUT__) == RTC_OUTPUT_ALARMB)  || \
+                                        ((__OUTPUT__) == RTC_OUTPUT_WAKEUP))
+#define IS_RTC_BKP(__BKP__)               ((__BKP__) < (uint32_t) RTC_BKP_NUMBER)
+#define IS_TIMESTAMP_EDGE(__EDGE__) (((__EDGE__) == RTC_TIMESTAMPEDGE_RISING) || \
+                                     ((__EDGE__) == RTC_TIMESTAMPEDGE_FALLING))
+#define IS_RTC_TAMPER(__TAMPER__)   ((((__TAMPER__) & ((uint32_t)(0xFFFFFFFF ^ RTC_TAMPCR_TAMPXE))) == 0x00) && ((__TAMPER__) != (uint32_t)RESET))
+
+#define IS_RTC_TAMPER_INTERRUPT(__INTERRUPT__)  ((((__INTERRUPT__) & (uint32_t)(0xFFFFFFFF ^ RTC_TAMPCR_TAMPXIE)) == 0x00) && ((__INTERRUPT__) != (uint32_t)RESET))
+
+#define IS_RTC_TIMESTAMP_PIN(__PIN__) (((__PIN__) == RTC_TIMESTAMPPIN_DEFAULT) || \
+                                       ((__PIN__) == RTC_TIMESTAMPPIN_POS1)  || \
+                                       ((__PIN__) == RTC_TIMESTAMPPIN_POS2))
+#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+                                        ((__TRIGGER__) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+                                        ((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+                                        ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+#define IS_RTC_TAMPER_ERASE_MODE(__MODE__)             (((__MODE__) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \
+                                                        ((__MODE__) == RTC_TAMPER_ERASE_BACKUP_DISABLE))
+#define IS_RTC_TAMPER_MASKFLAG_STATE(__STATE__)     (((__STATE__) == RTC_TAMPERMASK_FLAG_ENABLE) || \
+                                                     ((__STATE__) == RTC_TAMPERMASK_FLAG_DISABLE))
+#define IS_RTC_TAMPER_FILTER(__FILTER__)  (((__FILTER__) == RTC_TAMPERFILTER_DISABLE) || \
+                                       ((__FILTER__) == RTC_TAMPERFILTER_2SAMPLE) || \
+                                       ((__FILTER__) == RTC_TAMPERFILTER_4SAMPLE) || \
+                                       ((__FILTER__) == RTC_TAMPERFILTER_8SAMPLE))
+#define IS_RTC_TAMPER_SAMPLING_FREQ(__FREQ__) (((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+                                           ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+                                           ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+                                           ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+                                           ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+                                           ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+                                           ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512)  || \
+                                           ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+#define IS_RTC_TAMPER_PRECHARGE_DURATION(__DURATION__) (((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+                                                    ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+                                                    ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+                                                    ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(__DETECTION__) (((__DETECTION__) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+                                                              ((__DETECTION__) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+#define IS_RTC_TAMPER_PULLUP_STATE(__STATE__) (((__STATE__) == RTC_TAMPER_PULLUP_ENABLE) || \
+                                       ((__STATE__) == RTC_TAMPER_PULLUP_DISABLE))
+#define IS_RTC_WAKEUP_CLOCK(__CLOCK__) (((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV16)       || \
+                                    ((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV8)    || \
+                                    ((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV4)    || \
+                                    ((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV2)    || \
+                                    ((__CLOCK__) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+                                    ((__CLOCK__) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_RTC_WAKEUP_COUNTER(__COUNTER__)  ((__COUNTER__) <= 0xFFFF)
+#define IS_RTC_SMOOTH_CALIB_PERIOD(__PERIOD__) (((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+                                                ((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+                                                ((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+#define IS_RTC_SMOOTH_CALIB_PLUS(__PLUS__) (((__PLUS__) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+                                            ((__PLUS__) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+#define  IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x000001FF)
+#define IS_RTC_SHIFT_ADD1S(__SEL__) (((__SEL__) == RTC_SHIFTADD1S_RESET) || \
+                                     ((__SEL__) == RTC_SHIFTADD1S_SET))
+#define IS_RTC_SHIFT_SUBFS(__FS__) ((__FS__) <= 0x00007FFF)
+#define IS_RTC_CALIB_OUTPUT(__OUTPUT__)  (((__OUTPUT__) == RTC_CALIBOUTPUT_512HZ) || \
+                                          ((__OUTPUT__) == RTC_CALIBOUTPUT_1HZ))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_sai.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1933 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_sai.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   SAI HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Serial Audio Interface (SAI) peripheral:
+  *           + Initialization/de-initialization functions
+  *           + I/O operation functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State functions
+  *         
+  @verbatim
+ ==============================================================================
+                  ##### How to use this driver #####
+  ==============================================================================
+           
+  [..]
+    The SAI HAL driver can be used as follows:
+    
+    (#) Declare a SAI_HandleTypeDef handle structure.
+    (#) Initialize the SAI low level resources by implementing the HAL_SAI_MspInit() API:
+        (##) Enable the SAI interface clock.                      
+        (##) SAI pins configuration:
+            (+++) Enable the clock for the SAI GPIOs.
+            (+++) Configure these SAI pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_SAI_Transmit_IT()
+             and HAL_SAI_Receive_IT() APIs):
+            (+++) Configure the SAI interrupt priority.
+            (+++) Enable the NVIC SAI IRQ handle.
+
+        (##) DMA Configuration if you need to use DMA process (HAL_SAI_Transmit_DMA()
+             and HAL_SAI_Receive_DMA() APIs):
+            (+++) Declare a DMA handle structure for the Tx/Rx stream.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.                
+            (+++) Configure the DMA Tx/Rx Stream.
+            (+++) Associate the initialized DMA handle to the SAI DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the 
+                DMA Tx/Rx Stream.
+  
+   (#) Program the SAI Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity
+       using HAL_SAI_Init() function.
+   
+   -@- The specific SAI interrupts (FIFO request and Overrun underrun interrupt)
+       will be managed using the macros __SAI_ENABLE_IT() and __SAI_DISABLE_IT()
+       inside the transmit and receive process.   
+
+  [..]           
+   (@) SAI Clock Source, the configuration is managed through RCCEx_PeriphCLKConfig()
+            function in the HAL RCC drivers        
+  [..]           
+   (@) Make sure that either:
+       (+@) I2S PLL is configured or 
+       (+@) SAI PLL is configured or 
+       (+@) External clock source is configured after setting correctly 
+            the define constant EXTERNAL_CLOCK_VALUE in the stm32f7xx_hal_conf.h file. 
+                        
+  [..]           
+    (@) In master Tx mode: enabling the audio block immediately generates the bit clock 
+        for the external slaves even if there is no data in the FIFO, However FS signal 
+        generation is conditioned by the presence of data in the FIFO.
+                 
+  [..]           
+    (@) In master Rx mode: enabling the audio block immediately generates the bit clock 
+        and FS signal for the external slaves. 
+                
+  [..]           
+    (@) It is mandatory to respect the following conditions in order to avoid bad SAI behavior: 
+        (+@)  First bit Offset <= (SLOT size - Data size)
+        (+@)  Data size <= SLOT size
+        (+@)  Number of SLOT x SLOT size = Frame length
+        (+@)  The number of slots should be even when SAI_FS_CHANNEL_IDENTIFICATION is selected.  
+
+  [..]         
+     Three operation modes are available within this driver :     
+  
+   *** Polling mode IO operation ***
+   =================================
+   [..]    
+     (+) Send an amount of data in blocking mode using HAL_SAI_Transmit() 
+     (+) Receive an amount of data in blocking mode using HAL_SAI_Receive()
+   
+   *** Interrupt mode IO operation ***    
+   ===================================
+   [..]    
+     (+) Send an amount of data in non blocking mode using HAL_SAI_Transmit_IT() 
+     (+) At transmission end of transfer HAL_SAI_TxCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_SAI_TxCpltCallback
+     (+) Receive an amount of data in non blocking mode using HAL_SAI_Receive_IT() 
+     (+) At reception end of transfer HAL_SAI_RxCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_SAI_RxCpltCallback                                      
+     (+) In case of transfer Error, HAL_SAI_ErrorCallback() function is executed and user can 
+         add his own code by customization of function pointer HAL_SAI_ErrorCallback
+
+   *** DMA mode IO operation ***    
+   ==============================
+   [..] 
+     (+) Send an amount of data in non blocking mode (DMA) using HAL_SAI_Transmit_DMA() 
+     (+) At transmission end of transfer HAL_SAI_TxCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_SAI_TxCpltCallback
+     (+) Receive an amount of data in non blocking mode (DMA) using HAL_SAI_Receive_DMA() 
+     (+) At reception end of transfer HAL_SAI_RxCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_SAI_RxCpltCallback                                  
+     (+) In case of transfer Error, HAL_SAI_ErrorCallback() function is executed and user can 
+         add his own code by customization of function pointer HAL_SAI_ErrorCallback
+     (+) Pause the DMA Transfer using HAL_SAI_DMAPause()      
+     (+) Resume the DMA Transfer using HAL_SAI_DMAResume()  
+     (+) Stop the DMA Transfer using HAL_SAI_DMAStop()      
+   
+   *** SAI HAL driver macros list ***
+   ============================================= 
+   [..]
+     Below the list of most used macros in USART HAL driver :
+       
+      (+) __HAL_SAI_ENABLE: Enable the SAI peripheral
+      (+) __HAL_SAI_DISABLE: Disable the SAI peripheral
+      (+) __HAL_SAI_ENABLE_IT : Enable the specified SAI interrupts
+      (+) __HAL_SAI_DISABLE_IT : Disable the specified SAI interrupts
+      (+) __HAL_SAI_GET_IT_SOURCE: Check if the specified SAI interrupt source is 
+          enabled or disabled
+      (+) __HAL_SAI_GET_FLAG: Check whether the specified SAI flag is set or not
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SAI SAI
+  * @brief SAI HAL module driver
+  * @{
+  */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/** @defgroup SAI_Private_Typedefs  SAI Private Typedefs
+  * @{
+  */
+typedef enum {
+  SAI_MODE_DMA,
+  SAI_MODE_IT
+}SAI_ModeTypedef;
+/**
+  * @}
+  */
+/* Private define ------------------------------------------------------------*/
+/** @defgroup SAI_Private_Constants  SAI Private Constants
+  * @{
+  */
+#define SAI_FIFO_SIZE       8
+#define SAI_DEFAULT_TIMEOUT 4
+#define SAI_xCR2_MUTECNT_OFFSET POSITION_VAL(SAI_xCR2_MUTECNT)
+/**
+  * @}
+  */
+
+/* SAI registers Masks */
+#define CR1_CLEAR_MASK            ((uint32_t)0xFF04C010)
+#define FRCR_CLEAR_MASK           ((uint32_t)0xFFF88000)
+#define SLOTR_CLEAR_MASK          ((uint32_t)0x0000F020)
+
+#define SAI_TIMEOUT_VALUE         10
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void SAI_FillFifo(SAI_HandleTypeDef *hsai);
+static uint32_t SAI_InterruptFlag(SAI_HandleTypeDef *hsai, uint32_t mode);
+static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
+static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
+
+static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai);
+static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai);
+static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai);
+
+static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void SAI_DMAError(DMA_HandleTypeDef *hdma);
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Functions  SAI Exported Functions
+  * @{
+  */
+
+/** @defgroup SAI_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and 
+          de-initialize the SAIx peripheral:
+
+      (+) User must implement HAL_SAI_MspInit() function in which he configures 
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+      (+) Call the function HAL_SAI_Init() to configure the selected device with 
+          the selected configuration:
+        (++) Mode (Master/slave TX/RX)
+        (++) Protocol 
+        (++) Data Size
+        (++) MCLK Output
+        (++) Audio frequency
+        (++) FIFO Threshold
+        (++) Frame Config
+        (++) Slot Config
+
+      (+) Call the function HAL_SAI_DeInit() to restore the default configuration 
+          of the selected SAI peripheral.     
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the structure FrameInit, SlotInit and the low part of 
+  *         Init according to the specified parameters and call the function
+  *         HAL_SAI_Init to initialize the SAI block.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains 
+  *               the configuration information for SAI module.
+  * @param  protocol : one of the supported protocol @ref SAI_Protocol
+  * @param  datasize : one of the supported datasize @ref SAI_Protocol_DataSize
+  *                the configuration information for SAI module.
+  * @param  nbslot   : Number of slot.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
+{
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  /* Check the parameters */
+  assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol));
+  assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize));
+  
+  switch(protocol)
+  {
+  case SAI_I2S_STANDARD :
+  case SAI_I2S_MSBJUSTIFIED :
+  case SAI_I2S_LSBJUSTIFIED :
+    status = SAI_InitI2S(hsai, protocol, datasize, nbslot);
+    break;  
+  case SAI_PCM_LONG :
+  case SAI_PCM_SHORT :
+    status = SAI_InitPCM(hsai, protocol, datasize, nbslot);
+    break;
+  default :
+    status = HAL_ERROR;
+    break;
+  }
+  
+  if(status == HAL_OK)
+  {
+    status = HAL_SAI_Init(hsai);
+  }
+
+  return status;
+}
+
+/**
+  * @brief  Initializes the SAI according to the specified parameters 
+  *         in the SAI_InitTypeDef and create the associated handle.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai)
+{ 
+  uint32_t tmpclock = 0;
+
+  /* This variable used to store the SAI_CK_x (value in Hz) */
+  uint32_t freq = 0;
+  
+  uint32_t syncen_bits = 0;
+  
+  /* Check the SAI handle allocation */
+  if(hsai == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the SAI Block parameters */
+  assert_param(IS_SAI_AUDIO_FREQUENCY(hsai->Init.AudioFrequency));  
+  assert_param(IS_SAI_BLOCK_PROTOCOL(hsai->Init.Protocol));
+  assert_param(IS_SAI_BLOCK_MODE(hsai->Init.AudioMode));
+  assert_param(IS_SAI_BLOCK_SYNCEXT(hsai->Init.SynchroExt));
+  assert_param(IS_SAI_BLOCK_DATASIZE(hsai->Init.DataSize));
+  assert_param(IS_SAI_BLOCK_FIRST_BIT(hsai->Init.FirstBit));
+  assert_param(IS_SAI_BLOCK_CLOCK_STROBING(hsai->Init.ClockStrobing));
+  assert_param(IS_SAI_BLOCK_SYNCHRO(hsai->Init.Synchro));
+  assert_param(IS_SAI_BLOCK_OUTPUT_DRIVE(hsai->Init.OutputDrive));
+  assert_param(IS_SAI_BLOCK_NODIVIDER(hsai->Init.NoDivider));
+  assert_param(IS_SAI_BLOCK_FIFO_THRESHOLD(hsai->Init.FIFOThreshold));
+  assert_param(IS_SAI_MONO_STEREO_MODE(hsai->Init.MonoStereoMode));
+  assert_param(IS_SAI_BLOCK_COMPANDING_MODE(hsai->Init.CompandingMode));
+  assert_param(IS_SAI_BLOCK_TRISTATE_MANAGEMENT(hsai->Init.TriState));
+  
+  /* Check the SAI Block Frame parameters */
+  assert_param(IS_SAI_BLOCK_FRAME_LENGTH(hsai->FrameInit.FrameLength));
+  assert_param(IS_SAI_BLOCK_ACTIVE_FRAME(hsai->FrameInit.ActiveFrameLength));
+  assert_param(IS_SAI_BLOCK_FS_DEFINITION(hsai->FrameInit.FSDefinition));
+  assert_param(IS_SAI_BLOCK_FS_POLARITY(hsai->FrameInit.FSPolarity));
+  assert_param(IS_SAI_BLOCK_FS_OFFSET(hsai->FrameInit.FSOffset));
+  
+  /* Check the SAI Block Slot parameters */
+  assert_param(IS_SAI_BLOCK_FIRSTBIT_OFFSET(hsai->SlotInit.FirstBitOffset));
+  assert_param(IS_SAI_BLOCK_SLOT_SIZE(hsai->SlotInit.SlotSize));
+  assert_param(IS_SAI_BLOCK_SLOT_NUMBER(hsai->SlotInit.SlotNumber));
+  assert_param(IS_SAI_SLOT_ACTIVE(hsai->SlotInit.SlotActive));
+  
+  if(hsai->State == HAL_SAI_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hsai->Lock = HAL_UNLOCKED;
+    
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_SAI_MspInit(hsai);
+  }
+  
+  hsai->State = HAL_SAI_STATE_BUSY;
+  
+  /* Disable the selected SAI peripheral */
+  SAI_Disable(hsai);
+  
+  /* SAI Block Synchro Configuration -----------------------------------------*/
+  SAI_BlockSynchroConfig(hsai);
+    
+  /* Configure Master Clock using the following formula :
+     MCLK_x = SAI_CK_x / (MCKDIV[3:0] * 2) with MCLK_x = 256 * FS
+     FS = SAI_CK_x / (MCKDIV[3:0] * 2) * 256
+     MCKDIV[3:0] = SAI_CK_x / FS * 512 */
+  if(hsai->Init.AudioFrequency != SAI_AUDIO_FREQUENCY_MCKDIV)
+  { 
+  /* Get SAI clock source based on Source clock selection from RCC */
+  freq = SAI_GetInputClock(hsai);
+  
+    /* (saiclocksource x 10) to keep Significant digits */
+    tmpclock = (((freq * 10) / ((hsai->Init.AudioFrequency) * 512)));
+    
+    hsai->Init.Mckdiv = tmpclock / 10;
+    
+        /* Round result to the nearest integer */
+    if((tmpclock % 10) > 8) 
+    {
+      hsai->Init.Mckdiv+= 1;
+    }
+  }
+  
+  /* SAI Block Configuration ------------------------------------------------------------*/
+  switch(hsai->Init.Synchro)
+  {
+    case SAI_ASYNCHRONOUS :
+      {
+        syncen_bits = 0;
+      }
+      break;
+    case SAI_SYNCHRONOUS :
+      {
+        syncen_bits = SAI_xCR1_SYNCEN_0;
+      }
+      break;
+    case SAI_SYNCHRONOUS_EXT_SAI1 :
+    case SAI_SYNCHRONOUS_EXT_SAI2 :  
+      {
+        syncen_bits = SAI_xCR1_SYNCEN_1;
+      }
+      break;
+  }  
+  /* SAI CR1 Configuration */
+  hsai->Instance->CR1&=~(SAI_xCR1_MODE | SAI_xCR1_PRTCFG |  SAI_xCR1_DS |      \
+                         SAI_xCR1_LSBFIRST | SAI_xCR1_CKSTR | SAI_xCR1_SYNCEN |\
+                         SAI_xCR1_MONO | SAI_xCR1_OUTDRIV  | SAI_xCR1_DMAEN |  \
+                         SAI_xCR1_NODIV | SAI_xCR1_MCKDIV);
+
+  hsai->Instance->CR1|= (hsai->Init.AudioMode | hsai->Init.Protocol |           \
+                        hsai->Init.DataSize | hsai->Init.FirstBit  |           \
+                        hsai->Init.ClockStrobing | syncen_bits |        \
+                        hsai->Init.MonoStereoMode | hsai->Init.OutputDrive |   \
+                        hsai->Init.NoDivider | (hsai->Init.Mckdiv << 20));  
+  
+  /* SAI CR2 Configuration */
+  hsai->Instance->CR2&= ~(SAI_xCR2_FTH | SAI_xCR2_FFLUSH | SAI_xCR2_COMP | SAI_xCR2_CPL);
+  hsai->Instance->CR2|=  (hsai->Init.FIFOThreshold | hsai->Init.CompandingMode | hsai->Init.TriState);
+
+  /* SAI Frame Configuration -----------------------------------------*/
+  hsai->Instance->FRCR&=(~(SAI_xFRCR_FRL | SAI_xFRCR_FSALL | SAI_xFRCR_FSDEF | \
+                           SAI_xFRCR_FSPO | SAI_xFRCR_FSOFF));
+  hsai->Instance->FRCR|=((hsai->FrameInit.FrameLength - 1)  | 
+                            hsai->FrameInit.FSOffset | 
+                            hsai->FrameInit.FSDefinition | 
+                            hsai->FrameInit.FSPolarity   | 
+                            ((hsai->FrameInit.ActiveFrameLength - 1) << 8));  
+  
+  /* SAI Block_x SLOT Configuration ------------------------------------------*/
+  /* This register has no meaning in AC 97 and SPDIF audio protocol */
+  hsai->Instance->SLOTR&= (~(SAI_xSLOTR_FBOFF | SAI_xSLOTR_SLOTSZ |            \
+                             SAI_xSLOTR_NBSLOT | SAI_xSLOTR_SLOTEN ));
+  
+  hsai->Instance->SLOTR|=  hsai->SlotInit.FirstBitOffset |  hsai->SlotInit.SlotSize
+                          | (hsai->SlotInit.SlotActive << 16) | ((hsai->SlotInit.SlotNumber - 1) <<  8);           
+  
+  /* Initialize the error code */
+  hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+  
+  /* Initialize the SAI state */
+  hsai->State= HAL_SAI_STATE_READY;
+  
+  /* Release Lock */
+  __HAL_UNLOCK(hsai);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the SAI peripheral. 
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_DeInit(SAI_HandleTypeDef *hsai)
+{
+  /* Check the SAI handle allocation */
+  if(hsai == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  hsai->State = HAL_SAI_STATE_BUSY;
+
+  /* Disabled All interrupt and clear all the flag */
+  hsai->Instance->IMR = 0;
+  hsai->Instance->CLRFR = 0xFFFFFFFF;
+  
+  /* Disable the SAI */
+  SAI_Disable(hsai);
+
+  /* Flush the fifo */
+  SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+  
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_SAI_MspDeInit(hsai);
+
+  /* Initialize the error code */
+  hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+  
+  /* Initialize the SAI state */
+  hsai->State = HAL_SAI_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hsai);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief SAI MSP Init.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+__weak void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsai);
+  
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SAI_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief SAI MSP DeInit.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+__weak void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsai);
+  
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SAI_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Exported_Functions_Group2 IO operation functions 
+ *  @brief   Data transfers functions 
+ *
+@verbatim   
+  ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to manage the SAI data 
+    transfers.
+
+    (+) There are two modes of transfer:
+       (++) Blocking mode : The communication is performed in the polling mode. 
+            The status of all data processing is returned by the same function 
+            after finishing transfer.  
+       (++) No-Blocking mode : The communication is performed using Interrupts 
+            or DMA. These functions return the status of the transfer startup.
+            The end of the data processing will be indicated through the 
+            dedicated SAI IRQ when using Interrupt mode or the DMA IRQ when 
+            using DMA mode.
+
+    (+) Blocking mode functions are :
+        (++) HAL_SAI_Transmit()
+        (++) HAL_SAI_Receive()
+        (++) HAL_SAI_TransmitReceive()
+        
+    (+) Non Blocking mode functions with Interrupt are :
+        (++) HAL_SAI_Transmit_IT()
+        (++) HAL_SAI_Receive_IT()
+        (++) HAL_SAI_TransmitReceive_IT()
+
+    (+) Non Blocking mode functions with DMA are :
+        (++) HAL_SAI_Transmit_DMA()
+        (++) HAL_SAI_Receive_DMA()
+        (++) HAL_SAI_TransmitReceive_DMA()
+
+    (+) A set of Transfer Complete Callbacks are provided in non Blocking mode:
+        (++) HAL_SAI_TxCpltCallback()
+        (++) HAL_SAI_RxCpltCallback()
+        (++) HAL_SAI_ErrorCallback()
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Transmits an amount of data in blocking mode.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t* pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tickstart = HAL_GetTick();
+  
+  if((pData == NULL ) || (Size == 0)) 
+  {
+    return  HAL_ERROR;
+  }
+  
+  if(hsai->State == HAL_SAI_STATE_READY)
+  {  
+    /* Process Locked */
+    __HAL_LOCK(hsai);
+    
+    hsai->XferSize = Size;
+    hsai->XferCount = Size;
+    hsai->pBuffPtr = pData;
+    hsai->State = HAL_SAI_STATE_BUSY_TX;
+    hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+    
+    /* Check if the SAI is already enabled */ 
+    if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+    {
+      /* fill the fifo with data before to enabled the SAI */
+      SAI_FillFifo(hsai);      
+      /* Enable SAI peripheral */    
+      __HAL_SAI_ENABLE(hsai);
+    }
+    
+    while(hsai->XferCount > 0)
+    { 
+      /* Write data if the FIFO is not full */
+      if((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL)
+      {
+        if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+        {      
+          hsai->Instance->DR = (*hsai->pBuffPtr++);
+        }
+        else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+        {
+          hsai->Instance->DR = *((uint16_t *)hsai->pBuffPtr);
+          hsai->pBuffPtr+= 2;        
+        }
+        else
+        {
+          hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
+          hsai->pBuffPtr+= 4;
+        }       
+        hsai->XferCount--; 
+      }
+      else
+      {
+        /* Check for the Timeout */
+        if((Timeout != HAL_MAX_DELAY) && ((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)))
+        {
+          /* Update error code */
+          hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+          /* Change the SAI state */
+          hsai->State = HAL_SAI_STATE_TIMEOUT;
+          
+          return HAL_TIMEOUT;
+        }
+      }
+    }      
+    
+    hsai->State = HAL_SAI_STATE_READY; 
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsai);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in blocking mode. 
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint32_t tickstart = HAL_GetTick();
+  
+  if((pData == NULL ) || (Size == 0)) 
+  {
+    return  HAL_ERROR;
+  }
+  
+  if(hsai->State == HAL_SAI_STATE_READY)
+  { 
+    /* Process Locked */
+    __HAL_LOCK(hsai);
+    
+    hsai->pBuffPtr = pData;
+    hsai->XferSize = Size;
+    hsai->XferCount = Size;
+    hsai->State = HAL_SAI_STATE_BUSY_RX;
+    hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+    
+    /* Check if the SAI is already enabled */ 
+    if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+    {
+      /* Enable SAI peripheral */    
+      __HAL_SAI_ENABLE(hsai);
+    }
+    
+    /* Receive data */
+    while(hsai->XferCount > 0)
+    {      
+      if((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_EMPTY)
+      {
+        if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+        {
+          (*hsai->pBuffPtr++) = hsai->Instance->DR;
+        }
+        else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+        {
+          *((uint16_t*)hsai->pBuffPtr) = hsai->Instance->DR;
+          hsai->pBuffPtr+= 2;
+        }
+        else
+        {
+          *((uint32_t*)hsai->pBuffPtr) = hsai->Instance->DR;
+          hsai->pBuffPtr+= 4;
+        }  
+        hsai->XferCount--; 
+      }
+      else
+      {
+        /* Check for the Timeout */
+        if((Timeout != HAL_MAX_DELAY) && ((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)))
+        {
+          /* Update error code */
+          hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+          /* Change the SAI state */
+          hsai->State = HAL_SAI_STATE_TIMEOUT;
+          
+          return HAL_TIMEOUT;
+        }
+      }
+    }      
+    
+    hsai->State = HAL_SAI_STATE_READY; 
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsai);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmits an amount of data in no-blocking mode with Interrupt.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;
+    }
+    
+  if(hsai->State == HAL_SAI_STATE_READY)
+  {    
+    /* Process Locked */
+    __HAL_LOCK(hsai);
+    
+    hsai->pBuffPtr = pData;
+    hsai->XferSize = Size;
+    hsai->XferCount = Size;
+    hsai->ErrorCode = HAL_SAI_ERROR_NONE;    
+    hsai->State = HAL_SAI_STATE_BUSY_TX;
+    
+    if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+    {
+      hsai->InterruptServiceRoutine = SAI_Transmit_IT8Bit;
+    }
+    else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+    {
+      hsai->InterruptServiceRoutine = SAI_Transmit_IT16Bit;
+    }
+    else
+    {
+      hsai->InterruptServiceRoutine = SAI_Transmit_IT32Bit;
+    }
+    
+    /* Fill the fifo before starting the communication */
+    SAI_FillFifo(hsai);
+    
+    /* Enable FRQ and OVRUDR interrupts */
+    __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+    
+    /* Check if the SAI is already enabled */ 
+    if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+    {      
+      /* Enable SAI peripheral */    
+      __HAL_SAI_ENABLE(hsai);
+    }
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsai);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in no-blocking mode with Interrupt.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;
+    }
+    
+  if(hsai->State == HAL_SAI_STATE_READY)
+  {   
+    /* Process Locked */
+    __HAL_LOCK(hsai);
+    
+    hsai->pBuffPtr = pData;
+    hsai->XferSize = Size;
+    hsai->XferCount = Size;
+    hsai->ErrorCode = HAL_SAI_ERROR_NONE;    
+    hsai->State = HAL_SAI_STATE_BUSY_RX;
+    
+    if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+    {
+      hsai->InterruptServiceRoutine = SAI_Receive_IT8Bit;
+    }
+    else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+    {
+      hsai->InterruptServiceRoutine = SAI_Receive_IT16Bit;
+    }
+    else
+    {
+      hsai->InterruptServiceRoutine = SAI_Receive_IT32Bit;
+    }
+    
+    /* Enable TXE and OVRUDR interrupts */
+    __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+    
+    /* Check if the SAI is already enabled */ 
+    if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+    {
+      /* Enable SAI peripheral */    
+      __HAL_SAI_ENABLE(hsai);
+    }
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsai);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  } 
+}
+
+/**
+  * @brief Pauses the audio stream playing from the Media.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsai);
+  
+  /* Pause the audio file playing by disabling the SAI DMA requests */
+  hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsai);
+  
+  return HAL_OK; 
+}
+
+/**
+  * @brief Resumes the audio stream playing from the Media.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsai);
+  
+  /* Enable the SAI DMA requests */
+  hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
+
+  /* If the SAI peripheral is still not enabled, enable it */
+  if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+  {
+    /* Enable SAI peripheral */    
+    __HAL_SAI_ENABLE(hsai);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsai);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief Stops the audio stream playing from the Media.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsai);
+  
+  /* Disable the SAI DMA request */
+  hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+  
+  /* Abort the SAI DMA Tx Stream */
+  if(hsai->hdmatx != NULL)
+  {
+    if(HAL_DMA_Abort(hsai->hdmatx) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+  }
+  /* Abort the SAI DMA Rx Stream */
+  if(hsai->hdmarx != NULL)
+  {  
+    if(HAL_DMA_Abort(hsai->hdmarx) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+  }
+  
+  /* Disable SAI peripheral */
+  SAI_Disable(hsai);
+  
+  hsai->State = HAL_SAI_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsai);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief Abort the current transfer and disbaled the SAI.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai)
+{
+  /* Disable the SAI DMA request */
+  hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
+  
+  /* Abort the SAI DMA Tx Stream */
+  if(hsai->hdmatx != NULL)
+  {
+    if(HAL_DMA_Abort(hsai->hdmatx) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+  }
+  /* Abort the SAI DMA Rx Stream */
+  if(hsai->hdmarx != NULL)
+  {  
+    if(HAL_DMA_Abort(hsai->hdmarx) != HAL_OK)
+    {
+      return HAL_ERROR;
+    }
+  }
+
+  /* Disabled All interrupt and clear all the flag */
+  hsai->Instance->IMR = 0;
+  hsai->Instance->CLRFR = 0xFFFFFFFF;
+  
+  /* Disable SAI peripheral */
+  SAI_Disable(hsai);
+  
+  /* Flush the fifo */
+  SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
+  
+  hsai->State = HAL_SAI_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsai);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Transmits an amount of data in no-blocking mode with DMA.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  
+  if((pData == NULL) || (Size == 0)) 
+  {
+    return  HAL_ERROR;
+  }
+  
+  if(hsai->State == HAL_SAI_STATE_READY)
+  {  
+    /* Process Locked */
+    __HAL_LOCK(hsai);
+    
+    hsai->pBuffPtr = pData;
+    hsai->XferSize = Size;
+    hsai->XferCount = Size;
+    hsai->ErrorCode = HAL_SAI_ERROR_NONE;
+    hsai->State = HAL_SAI_STATE_BUSY_TX;
+    
+    /* Set the SAI Tx DMA Half transfer complete callback */
+    hsai->hdmatx->XferHalfCpltCallback = SAI_DMATxHalfCplt;
+    
+    /* Set the SAI TxDMA transfer complete callback */
+    hsai->hdmatx->XferCpltCallback = SAI_DMATxCplt;
+    
+    /* Set the DMA error callback */
+    hsai->hdmatx->XferErrorCallback = SAI_DMAError;
+    
+    /* Enable the Tx DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hsai->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsai->Instance->DR, hsai->XferSize);
+    
+    /* Check if the SAI is already enabled */ 
+    if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+    {
+      /* Enable SAI peripheral */
+      __HAL_SAI_ENABLE(hsai);
+    }
+    
+    /* Enable the interrupts for error handling */
+    __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+    
+    /* Enable SAI Tx DMA Request */  
+    hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsai);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data in no-blocking mode with DMA. 
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  
+  if((pData == NULL) || (Size == 0))
+  {
+    return  HAL_ERROR;
+  } 
+  
+  if(hsai->State == HAL_SAI_STATE_READY)
+  {   
+    /* Process Locked */
+    __HAL_LOCK(hsai);
+    
+    hsai->pBuffPtr = pData;
+    hsai->XferSize = Size;
+    hsai->XferCount = Size;
+    hsai->ErrorCode = HAL_SAI_ERROR_NONE;    
+    hsai->State = HAL_SAI_STATE_BUSY_RX;
+    
+    /* Set the SAI Rx DMA Half transfer complete callback */
+    hsai->hdmarx->XferHalfCpltCallback = SAI_DMARxHalfCplt;
+    
+    /* Set the SAI Rx DMA transfer complete callback */
+    hsai->hdmarx->XferCpltCallback = SAI_DMARxCplt;
+    
+    /* Set the DMA error callback */
+    hsai->hdmarx->XferErrorCallback = SAI_DMAError;
+    
+    /* Enable the Rx DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hsai->hdmarx, (uint32_t)&hsai->Instance->DR, *(uint32_t*)tmp, hsai->XferSize);
+    
+    /* Check if the SAI is already enabled */
+    if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
+    {
+      /* Enable SAI peripheral */
+      __HAL_SAI_ENABLE(hsai);
+    }
+    
+    /* Enable the interrupts for error handling */
+    __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+    
+    /* Enable SAI Rx DMA Request */
+    hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsai);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Enable the tx mute mode.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  val :  value sent during the mute @ref SAI_Block_Mute_Value
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val)
+{
+  assert_param(IS_SAI_BLOCK_MUTE_VALUE(val));
+  
+  if(hsai->State != HAL_SAI_STATE_RESET)
+  {
+    CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE);
+    SET_BIT(hsai->Instance->CR2, SAI_xCR2_MUTE | val);
+    return HAL_OK;
+  }
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  Disable the tx mute mode.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai)
+{
+  if(hsai->State != HAL_SAI_STATE_RESET)
+  {
+    CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE);
+    return HAL_OK;
+  }
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  Enable the rx mute detection.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  callback : function called when the mute is detected
+  * @param  counter : number a data before mute detection max 63.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter)
+{
+  assert_param(IS_SAI_BLOCK_MUTE_COUNTER(counter));
+  
+  if(hsai->State != HAL_SAI_STATE_RESET)
+  {
+    /* set the mute counter */
+    CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTECNT);
+    SET_BIT(hsai->Instance->CR2, (uint32_t)((uint32_t)counter << SAI_xCR2_MUTECNT_OFFSET));
+    hsai->mutecallback = callback;
+    /* enable the IT interrupt */
+    __HAL_SAI_ENABLE_IT(hsai, SAI_IT_MUTEDET);
+    return HAL_OK;
+  }
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  Disable the rx mute detection.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai)
+{
+  if(hsai->State != HAL_SAI_STATE_RESET)
+  {
+    /* set the mutecallback to NULL */
+    hsai->mutecallback = (SAIcallback)NULL;
+    /* enable the IT interrupt */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_IT_MUTEDET);
+    return HAL_OK;
+  }
+  return HAL_ERROR;
+}
+
+/**
+  * @brief  This function handles SAI interrupt request.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL status
+  */
+void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai)
+{ 
+  if(hsai->State != HAL_SAI_STATE_RESET)
+  {
+    uint32_t tmpFlag = hsai->Instance->SR;
+    uint32_t tmpItSource = hsai->Instance->IMR; 
+    
+    if(((tmpFlag & SAI_xSR_FREQ) == SAI_xSR_FREQ) && ((tmpItSource & SAI_IT_FREQ) == SAI_IT_FREQ))
+    {
+      hsai->InterruptServiceRoutine(hsai);
+    }
+    
+    /* check the flag only if one of them is set */
+    if(tmpFlag != 0x00000000)
+    {
+      /* SAI Overrun error interrupt occurred ----------------------------------*/
+      if(((tmpFlag & SAI_FLAG_OVRUDR) == SAI_FLAG_OVRUDR) && ((tmpItSource & SAI_IT_OVRUDR) == SAI_IT_OVRUDR))
+      {
+        /* Clear the SAI Overrun flag */
+        __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+        /* Change the SAI error code */
+        hsai->ErrorCode = ((hsai->State == HAL_SAI_STATE_BUSY_RX) ? HAL_SAI_ERROR_OVR : HAL_SAI_ERROR_UDR);
+        /* the transfer is not stopped, we will forward the information to the user and we let the user decide what needs to be done */
+        HAL_SAI_ErrorCallback(hsai);
+      }
+      
+      /* SAI mutedet interrupt occurred ----------------------------------*/
+      if(((tmpFlag & SAI_FLAG_MUTEDET) == SAI_FLAG_MUTEDET) && ((tmpItSource & SAI_IT_MUTEDET) == SAI_IT_MUTEDET))
+      {
+        /* Clear the SAI mutedet flag */
+        __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_MUTEDET);
+        /* call the call back function */
+        if(hsai->mutecallback != (SAIcallback)NULL)
+        {
+          /* inform the user that an RX mute event has been detected */
+          hsai->mutecallback();
+        }
+      }
+      
+      /* SAI AFSDET interrupt occurred ----------------------------------*/
+      if(((tmpFlag & SAI_FLAG_AFSDET) == SAI_FLAG_AFSDET) && ((tmpItSource & SAI_IT_AFSDET) == SAI_IT_AFSDET))
+      {
+        /* Change the SAI error code */
+        hsai->ErrorCode = HAL_SAI_ERROR_AFSDET;
+        HAL_SAI_Abort(hsai);
+        HAL_SAI_ErrorCallback(hsai);
+      }
+      
+      /* SAI LFSDET interrupt occurred ----------------------------------*/
+      if(((tmpFlag & SAI_FLAG_LFSDET) == SAI_FLAG_LFSDET) && ((tmpItSource & SAI_IT_LFSDET) == SAI_IT_LFSDET))
+      {
+        /* Change the SAI error code */
+        hsai->ErrorCode = HAL_SAI_ERROR_LFSDET;
+        HAL_SAI_Abort(hsai);
+        HAL_SAI_ErrorCallback(hsai);
+      }
+
+      /* SAI WCKCFG interrupt occurred ----------------------------------*/
+      if(((tmpFlag & SAI_FLAG_WCKCFG) == SAI_FLAG_WCKCFG) && ((tmpItSource & SAI_IT_WCKCFG) == SAI_IT_WCKCFG))
+      {
+        /* Change the SAI error code */
+        hsai->ErrorCode = HAL_SAI_ERROR_WCKCFG;
+        HAL_SAI_Abort(hsai);
+        HAL_SAI_ErrorCallback(hsai);
+      }
+      /* SAI CNRDY interrupt occurred ----------------------------------*/
+      if(((tmpFlag & SAI_FLAG_CNRDY) == SAI_FLAG_CNRDY) && ((tmpItSource & SAI_IT_CNRDY) == SAI_IT_CNRDY))
+      {
+        /* Clear the SAI CNRDY flag */
+        __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_CNRDY);
+        /* Change the SAI error code */
+        hsai->ErrorCode = HAL_SAI_ERROR_CNREADY;
+        /* the transfer is not stopped, we will forward the information to the user and we let the user decide what needs to be done */
+        HAL_SAI_ErrorCallback(hsai);
+      }      
+    }
+  }
+}
+
+/**
+  * @brief Tx Transfer completed callbacks.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+ __weak void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsai);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SAI_TxCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief Tx Transfer Half completed callbacks
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+ __weak void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsai);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SAI_TxHalfCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief Rx Transfer completed callbacks.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+__weak void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsai);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SAI_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer half completed callbacks
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+__weak void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsai);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SAI_RxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief SAI error callbacks.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None
+  */
+__weak void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsai);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SAI_ErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+
+/** @defgroup SAI_Exported_Functions_Group3 Peripheral State functions 
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+ ===============================================================================
+                ##### Peripheral State and Errors functions #####
+ ===============================================================================  
+    [..]
+    This subsection permits to get in run-time the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the SAI state.
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval HAL state
+  */
+HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai)
+{
+  return hsai->State;
+}
+
+/**
+* @brief  Return the SAI error code
+* @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *              the configuration information for the specified SAI Block.
+* @retval SAI Error Code
+*/
+uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai)
+{
+  return hsai->ErrorCode;
+}
+/**
+  * @}
+  */
+
+/**
+  * @brief  Initializes the SAI I2S protocol according to the specified parameters 
+  *         in the SAI_InitTypeDef and create the associated handle.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  protocol : one of the supported protocol
+  * @param  datasize : one of the supported datasize @ref SAI_Protocol_DataSize
+  *                the configuration information for SAI module.
+  * @param  nbslot : number of slot minimum value is 2 and max is 16. 
+  *                    the value must be a multiple of 2.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
+{
+  /* Check the parameters */
+  assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol));
+  assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize));
+  
+  hsai->Init.Protocol            = SAI_FREE_PROTOCOL;
+  hsai->Init.FirstBit            = SAI_FIRSTBIT_MSB;
+  hsai->Init.ClockStrobing       = SAI_CLOCKSTROBING_FALLINGEDGE;
+  hsai->FrameInit.FSDefinition   = SAI_FS_CHANNEL_IDENTIFICATION;
+  hsai->SlotInit.SlotActive      = SAI_SLOTACTIVE_ALL;
+  hsai->SlotInit.FirstBitOffset  = 0;
+  hsai->SlotInit.SlotNumber      = nbslot;
+  
+  /* in IS2 the number of slot must be even */
+  if((nbslot & 0x1) != 0 )
+  {
+    return HAL_ERROR;
+  }
+  
+  switch(protocol)
+  {
+  case SAI_I2S_STANDARD :
+    hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
+    hsai->FrameInit.FSOffset   = SAI_FS_BEFOREFIRSTBIT;
+    break;
+  case SAI_I2S_MSBJUSTIFIED :
+  case SAI_I2S_LSBJUSTIFIED :
+    hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH;
+    hsai->FrameInit.FSOffset   = SAI_FS_FIRSTBIT;
+    break;
+  default :
+    return HAL_ERROR;
+  }
+  
+  /* Frame definition */
+  switch(datasize)
+  {
+  case SAI_PROTOCOL_DATASIZE_16BIT:
+    hsai->Init.DataSize = SAI_DATASIZE_16;
+    hsai->FrameInit.FrameLength = 32*(nbslot/2);
+    hsai->FrameInit.ActiveFrameLength = 16*(nbslot/2);
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B;
+    break; 
+  case SAI_PROTOCOL_DATASIZE_16BITEXTENDED :
+    hsai->Init.DataSize = SAI_DATASIZE_16;
+    hsai->FrameInit.FrameLength = 64*(nbslot/2);
+    hsai->FrameInit.ActiveFrameLength = 32*(nbslot/2);
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+    break; 
+  case SAI_PROTOCOL_DATASIZE_24BIT:
+    hsai->Init.DataSize = SAI_DATASIZE_24;
+    hsai->FrameInit.FrameLength = 64*(nbslot/2);
+    hsai->FrameInit.ActiveFrameLength = 32*(nbslot/2);
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+    break;
+  case SAI_PROTOCOL_DATASIZE_32BIT: 
+    hsai->Init.DataSize = SAI_DATASIZE_32;
+    hsai->FrameInit.FrameLength = 64*(nbslot/2);
+    hsai->FrameInit.ActiveFrameLength = 32*(nbslot/2);
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+    break;
+  default :
+    return HAL_ERROR;  
+  }
+  if(protocol == SAI_I2S_LSBJUSTIFIED)
+  {
+    if (datasize == SAI_PROTOCOL_DATASIZE_16BITEXTENDED)
+    {
+      hsai->SlotInit.FirstBitOffset = 16;
+    }
+    if (datasize == SAI_PROTOCOL_DATASIZE_24BIT)
+    {
+      hsai->SlotInit.FirstBitOffset = 8;
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the SAI PCM protocol according to the specified parameters 
+  *         in the SAI_InitTypeDef and create the associated handle.
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  protocol : one of the supported protocol
+  * @param  datasize : one of the supported datasize @ref SAI_Protocol_DataSize
+  * @param  nbslot : number of slot minimum value is 1 and the max is 16.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
+{
+  /* Check the parameters */
+  assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol));
+  assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize));
+
+  hsai->Init.Protocol            = SAI_FREE_PROTOCOL;
+  hsai->Init.FirstBit            = SAI_FIRSTBIT_MSB;
+  hsai->Init.ClockStrobing       = SAI_CLOCKSTROBING_FALLINGEDGE;
+  hsai->FrameInit.FSDefinition   = SAI_FS_STARTFRAME;
+  hsai->FrameInit.FSPolarity     = SAI_FS_ACTIVE_HIGH;
+  hsai->FrameInit.FSOffset       = SAI_FS_BEFOREFIRSTBIT;
+  hsai->SlotInit.FirstBitOffset  = 0;
+  hsai->SlotInit.SlotNumber      = nbslot;
+  hsai->SlotInit.SlotActive      = SAI_SLOTACTIVE_ALL;
+  
+  switch(protocol)
+  {
+  case SAI_PCM_SHORT :
+    hsai->FrameInit.ActiveFrameLength = 1;
+    break;
+  case SAI_PCM_LONG :
+    hsai->FrameInit.ActiveFrameLength = 13;
+    break;
+  default :
+    return HAL_ERROR;
+  }
+ 
+  switch(datasize)
+  {
+  case SAI_PROTOCOL_DATASIZE_16BIT:
+    hsai->Init.DataSize = SAI_DATASIZE_16;
+    hsai->FrameInit.FrameLength = 16 * nbslot;
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B;
+    break; 
+  case SAI_PROTOCOL_DATASIZE_16BITEXTENDED :
+    hsai->Init.DataSize = SAI_DATASIZE_16;
+    hsai->FrameInit.FrameLength = 32 * nbslot;
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+    break;
+  case SAI_PROTOCOL_DATASIZE_24BIT :
+    hsai->Init.DataSize = SAI_DATASIZE_24;
+    hsai->FrameInit.FrameLength = 32 * nbslot;
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+    break;    
+  case SAI_PROTOCOL_DATASIZE_32BIT: 
+    hsai->Init.DataSize = SAI_DATASIZE_32;
+    hsai->FrameInit.FrameLength = 32 * nbslot;
+    hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
+    break;
+  default :
+    return HAL_ERROR;
+  }
+ 
+  return HAL_OK;
+}
+
+/**
+  * @brief  Fill the fifo 
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_FillFifo(SAI_HandleTypeDef *hsai)
+{
+  /* fill the fifo with data before to enabled the SAI */
+  while(((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL) && (hsai->XferCount > 0))   
+  {
+    if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
+    {
+      hsai->Instance->DR = (*hsai->pBuffPtr++);
+    }
+    else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
+    {
+      hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
+      hsai->pBuffPtr+= 2;
+    }
+    else
+    {
+      hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
+      hsai->pBuffPtr+= 4;
+    }
+    hsai->XferCount--;
+  }
+}
+
+/**
+  * @brief  return the interrupt flag to set according the SAI setup 
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @param  mode : SAI_MODE_DMA or SAI_MODE_IT
+  * @retval the list of the IT flag to enable
+ */
+static uint32_t SAI_InterruptFlag(SAI_HandleTypeDef *hsai, uint32_t mode)
+{
+  uint32_t tmpIT = SAI_IT_OVRUDR; 
+  
+  if(mode == SAI_MODE_IT)
+  {
+    tmpIT|= SAI_IT_FREQ;
+  }
+
+  if((hsai->Init.Protocol == SAI_AC97_PROTOCOL) && 
+    ((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODEMASTER_RX)))
+  {
+    tmpIT|= SAI_IT_CNRDY;
+  }
+  
+  if((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX))
+  {
+    tmpIT|= SAI_IT_AFSDET | SAI_IT_LFSDET;
+  }
+  else
+  {
+    /* hsai has been configured in master mode */
+    tmpIT|= SAI_IT_WCKCFG;
+  }
+  return tmpIT;
+}
+
+/**
+  * @brief  disable the SAI and wait the disabling
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai)
+{
+  uint32_t tickstart = HAL_GetTick();
+  HAL_StatusTypeDef status = HAL_OK;
+  
+  __HAL_SAI_DISABLE(hsai);
+  while((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != RESET)
+  {
+    /* Check for the Timeout */
+    if((HAL_GetTick() - tickstart ) > SAI_TIMEOUT_VALUE)
+    {         
+      /* Update error code */
+      hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+      
+      return HAL_TIMEOUT;
+    }
+  }
+  return status;
+}
+
+/**
+  * @brief  Tx Handler for Transmit in Interrupt mode 8Bit transfer
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai)
+{
+  if(hsai->XferCount == 0)
+  {
+    /* Handle the end of the transmission */
+    /* Disable FREQ and OVRUDR interrupts */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); 
+    hsai->State = HAL_SAI_STATE_READY;
+    HAL_SAI_TxCpltCallback(hsai);
+  }
+  else
+  {
+    /* Write data on DR register */
+    hsai->Instance->DR = (*hsai->pBuffPtr++);
+    hsai->XferCount--;
+  }  
+}
+
+/**
+  * @brief  Tx Handler for Transmit in Interrupt mode for 16Bit transfer
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai)
+{
+  if(hsai->XferCount == 0)
+  {
+    /* Handle the end of the transmission */    
+    /* Disable FREQ and OVRUDR interrupts */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); 
+    hsai->State = HAL_SAI_STATE_READY;
+    HAL_SAI_TxCpltCallback(hsai);
+  }
+  else
+  {
+    /* Write data on DR register */
+    hsai->Instance->DR = *(uint16_t *)hsai->pBuffPtr;
+    hsai->pBuffPtr+=2;
+    hsai->XferCount--;
+  }  
+}
+
+/**
+  * @brief  Tx Handler for Transmit in Interrupt mode for 32Bit transfer
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai)
+{
+  if(hsai->XferCount == 0)
+  {
+    /* Handle the end of the transmission */
+    /* Disable FREQ and OVRUDR interrupts */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT)); 
+    hsai->State = HAL_SAI_STATE_READY;
+    HAL_SAI_TxCpltCallback(hsai);
+  }
+  else
+  {
+    /* Write data on DR register */
+    hsai->Instance->DR = *(uint32_t *)hsai->pBuffPtr;
+    hsai->pBuffPtr+=4;
+    hsai->XferCount--;
+  }
+}
+
+/**
+  * @brief  Rx Handler for Receive in Interrupt mode 8Bit transfer
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai)
+{
+  /* Receive data */    
+  (*hsai->pBuffPtr++) = hsai->Instance->DR;
+  hsai->XferCount--;
+  
+  /* Check end of the transfer */  
+  if(hsai->XferCount == 0)
+  {    
+    /* Disable TXE and OVRUDR interrupts */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+    
+    /* Clear the SAI Overrun flag */
+    __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+    
+    hsai->State = HAL_SAI_STATE_READY;
+    HAL_SAI_RxCpltCallback(hsai); 
+  }
+}
+
+/**
+  * @brief  Rx Handler for Receive in Interrupt mode for 16Bit transfer
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai)
+{
+  /* Receive data */    
+  *(uint16_t*)hsai->pBuffPtr = hsai->Instance->DR;
+  hsai->pBuffPtr+=2;
+  hsai->XferCount--;
+  
+  /* Check end of the transfer */  
+  if(hsai->XferCount == 0)
+  {    
+    /* Disable TXE and OVRUDR interrupts */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+    
+    /* Clear the SAI Overrun flag */
+    __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+    
+    hsai->State = HAL_SAI_STATE_READY;
+    HAL_SAI_RxCpltCallback(hsai); 
+  }
+}
+/**
+  * @brief  Rx Handler for Receive in Interrupt mode for 32Bit transfer
+  * @param  hsai : pointer to a SAI_HandleTypeDef structure that contains
+  *                the configuration information for SAI module.
+  * @retval None.
+  */
+static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai)
+{
+  /* Receive data */    
+  *(uint32_t*)hsai->pBuffPtr = hsai->Instance->DR;
+  hsai->pBuffPtr+=4;
+  hsai->XferCount--;
+  
+  /* Check end of the transfer */  
+  if(hsai->XferCount == 0)
+  {    
+    /* Disable TXE and OVRUDR interrupts */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
+    
+    /* Clear the SAI Overrun flag */
+    __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
+    
+    hsai->State = HAL_SAI_STATE_READY;
+    HAL_SAI_RxCpltCallback(hsai); 
+  }
+}
+
+/**
+  * @brief DMA SAI transmit process complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma)   
+{
+  SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  { 
+    hsai->XferCount = 0;
+    
+    /* Disable SAI Tx DMA Request */  
+    hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
+
+    /* Stop the interrupts error handling */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+    
+    hsai->State= HAL_SAI_STATE_READY;
+  }
+  HAL_SAI_TxCpltCallback(hsai);
+}
+
+/**
+  * @brief DMA SAI transmit process half complete callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_SAI_TxHalfCpltCallback(hsai);
+}
+
+/**
+  * @brief DMA SAI receive process complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma)   
+{
+  SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    /* Disable Rx DMA Request */
+    hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
+    hsai->XferCount = 0;
+    
+    /* Stop the interrupts error handling */
+    __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
+    
+    hsai->State = HAL_SAI_STATE_READY;
+  }
+  HAL_SAI_RxCpltCallback(hsai); 
+}
+
+/**
+  * @brief DMA SAI receive process half complete callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_SAI_RxHalfCpltCallback(hsai); 
+}
+/**
+  * @brief DMA SAI communication error callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SAI_DMAError(DMA_HandleTypeDef *hdma)   
+{
+  SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* Stop the DMA transfer */
+  HAL_SAI_DMAStop(hsai);
+  
+  /* Set the SAI state ready to be able to start again the process */
+  hsai->State= HAL_SAI_STATE_READY;
+  HAL_SAI_ErrorCallback(hsai);
+  
+  hsai->XferCount = 0;
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_SAI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_sai.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,903 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_sai.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of SAI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_SAI_H
+#define __STM32F7xx_HAL_SAI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"  
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SAI
+  * @{
+  */ 
+  
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup SAI_Exported_Types SAI Exported Types
+  * @{
+  */
+ 
+/** 
+  * @brief  HAL State structures definition  
+  */ 
+typedef enum
+{
+  HAL_SAI_STATE_RESET      = 0x00,  /*!< SAI not yet initialized or disabled                */
+  HAL_SAI_STATE_READY      = 0x01,  /*!< SAI initialized and ready for use                  */
+  HAL_SAI_STATE_BUSY       = 0x02,  /*!< SAI internal process is ongoing                    */
+  HAL_SAI_STATE_BUSY_TX    = 0x12,  /*!< Data transmission process is ongoing               */ 
+  HAL_SAI_STATE_BUSY_RX    = 0x22,  /*!< Data reception process is ongoing                  */  
+  HAL_SAI_STATE_TIMEOUT    = 0x03,  /*!< SAI timeout state                                  */
+  HAL_SAI_STATE_ERROR      = 0x04   /*!< SAI error state                                    */                                                                        
+}HAL_SAI_StateTypeDef;
+
+/** 
+  * @brief  SAI Callback prototype 
+  */
+typedef void (*SAIcallback)(void);
+
+/** 
+  * @brief  SAI Init Structure definition  
+  */
+typedef struct
+{                                    
+  uint32_t AudioMode;           /*!< Specifies the SAI Block audio Mode. 
+                                     This parameter can be a value of @ref SAI_Block_Mode                 */
+
+  uint32_t Synchro;             /*!< Specifies SAI Block synchronization
+                                     This parameter can be a value of @ref SAI_Block_Synchronization           */
+ 
+  uint32_t SynchroExt;          /*!< Specifies SAI Block synchronization, this setup is common 
+                                     for BLOCKA and BLOCKB
+                                     This parameter can be a value of @ref SAI_Block_SyncExt                   */
+
+  uint32_t OutputDrive;         /*!< Specifies when SAI Block outputs are driven.
+                                     This parameter can be a value of @ref SAI_Block_Output_Drive
+                                     @note this value has to be set before enabling the audio block  
+                                     but after the audio block configuration.                                  */
+
+  uint32_t NoDivider;           /*!< Specifies whether master clock will be divided or not.
+                                     This parameter can be a value of @ref SAI_Block_NoDivider
+                                     @note  If bit NODIV in the SAI_xCR1 register is cleared, the frame length 
+                                            should be aligned to a number equal to a power of 2, from 8 to 256.
+                                            If bit NODIV in the SAI_xCR1 register is set, the frame length can 
+                                            take any of the values without constraint since the input clock of 
+                                            the audio block should be equal to the bit clock.
+                                             There is no MCLK_x clock which can be output.                     */
+  
+  uint32_t FIFOThreshold;       /*!< Specifies SAI Block FIFO threshold.
+                                     This parameter can be a value of @ref SAI_Block_Fifo_Threshold            */
+
+  uint32_t AudioFrequency;      /*!< Specifies the audio frequency sampling.     
+                                     This parameter can be a value of @ref SAI_Audio_Frequency                 */
+
+  uint32_t Mckdiv;              /*!< Specifies the master clock divider, the parameter will be used if for 
+                                     AudioFrequency the user choice 
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 15    */
+
+  uint32_t MonoStereoMode;      /*!< Specifies if the mono or stereo mode is selected.     
+                                     This parameter can be a value of @ref SAI_Mono_Stereo_Mode                */  
+                                   
+  uint32_t CompandingMode;      /*!< Specifies the companding mode type.     
+                                     This parameter can be a value of @ref SAI_Block_Companding_Mode           */
+  
+  uint32_t TriState;            /*!< Specifies the companding mode type.     
+                                     This parameter can be a value of @ref SAI_TRIState_Management             */
+                                   
+  /* This part of the structure is automatically filled if your are using the high level initialisation 
+     function HAL_SAI_InitProtocol                                                                             */
+
+  uint32_t Protocol;        /*!< Specifies the SAI Block protocol.
+                                 This parameter can be a value of @ref SAI_Block_Protocol                      */
+ 
+  uint32_t DataSize;        /*!< Specifies the SAI Block data size.
+                                 This parameter can be a value of @ref SAI_Block_Data_Size                     */
+
+  uint32_t FirstBit;        /*!< Specifies whether data transfers start from MSB or LSB bit.
+                                 This parameter can be a value of @ref SAI_Block_MSB_LSB_transmission          */
+
+  uint32_t ClockStrobing;   /*!< Specifies the SAI Block clock strobing edge sensitivity.
+                                 This parameter can be a value of @ref SAI_Block_Clock_Strobing                */                             
+}SAI_InitTypeDef;
+
+/** 
+  * @brief  SAI Block Frame Init structure definition  
+  */
+ 
+typedef struct
+{
+
+  uint32_t FrameLength;         /*!< Specifies the Frame length, the number of SCK clocks for each audio frame.
+                                     This parameter must be a number between Min_Data = 8 and Max_Data = 256.
+                                     @note  If master clock MCLK_x pin is declared as an output, the frame length
+                                            should be aligned to a number equal to power of 2 in order to keep 
+                                            in an audio frame, an integer number of MCLK pulses by bit Clock. */                                               
+                                                                            
+  uint32_t ActiveFrameLength;  /*!< Specifies the Frame synchronization active level length.
+                                    This Parameter specifies the length in number of bit clock (SCK + 1)  
+                                    of the active level of FS signal in audio frame.
+                                    This parameter must be a number between Min_Data = 1 and Max_Data = 128   */
+                                         
+  uint32_t FSDefinition;       /*!< Specifies the Frame synchronization definition.
+                                    This parameter can be a value of @ref SAI_Block_FS_Definition             */
+                                         
+  uint32_t FSPolarity;         /*!< Specifies the Frame synchronization Polarity.
+                                    This parameter can be a value of @ref SAI_Block_FS_Polarity               */
+
+  uint32_t FSOffset;           /*!< Specifies the Frame synchronization Offset.
+                                    This parameter can be a value of @ref SAI_Block_FS_Offset                 */
+
+}SAI_FrameInitTypeDef;
+
+/**
+  * @brief   SAI Block Slot Init Structure definition
+  */    
+
+typedef struct
+{
+  uint32_t FirstBitOffset;  /*!< Specifies the position of first data transfer bit in the slot.
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 24 */
+
+  uint32_t SlotSize;        /*!< Specifies the Slot Size.
+                                 This parameter can be a value of @ref SAI_Block_Slot_Size              */
+
+  uint32_t SlotNumber;      /*!< Specifies the number of slot in the audio frame.
+                                 This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+
+  uint32_t SlotActive;      /*!< Specifies the slots in audio frame that will be activated.
+                                 This parameter can be a value of @ref SAI_Block_Slot_Active            */
+}SAI_SlotInitTypeDef;
+
+/** 
+  * @brief  SAI handle Structure definition  
+  */
+typedef struct __SAI_HandleTypeDef
+{
+  SAI_Block_TypeDef         *Instance;  /*!< SAI Blockx registers base address        */
+
+  SAI_InitTypeDef           Init;       /*!< SAI communication parameters             */
+
+  SAI_FrameInitTypeDef      FrameInit;  /*!< SAI Frame configuration parameters       */
+
+  SAI_SlotInitTypeDef       SlotInit;   /*!< SAI Slot configuration parameters        */
+
+  uint8_t                  *pBuffPtr;  /*!< Pointer to SAI transfer Buffer            */
+
+  uint16_t                  XferSize;  /*!< SAI transfer size                         */
+
+  uint16_t                  XferCount; /*!< SAI transfer counter                      */
+
+  DMA_HandleTypeDef         *hdmatx;     /*!< SAI Tx DMA handle parameters            */
+
+  DMA_HandleTypeDef         *hdmarx;     /*!< SAI Rx DMA handle parameters            */
+
+  SAIcallback               mutecallback;/*!< SAI mute callback                */
+  
+  void (*InterruptServiceRoutine)(struct __SAI_HandleTypeDef *hsai); /* function pointer for IRQ handler   */
+  
+  HAL_LockTypeDef           Lock;        /*!< SAI locking object                      */
+
+  __IO HAL_SAI_StateTypeDef State;       /*!< SAI communication state                 */
+
+  __IO uint32_t             ErrorCode;   /*!< SAI Error code                          */
+}SAI_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Constants SAI Exported Constants
+  * @{
+  */
+
+/** @defgroup SAI_Error_Code SAI Error Code 
+  * @{
+  */
+#define HAL_SAI_ERROR_NONE    ((uint32_t)0x00000000)  /*!< No error                                    */
+#define HAL_SAI_ERROR_OVR     ((uint32_t)0x00000001)  /*!< Overrun Error                               */
+#define HAL_SAI_ERROR_UDR     ((uint32_t)0x00000002)  /*!< Underrun error                              */
+#define HAL_SAI_ERROR_AFSDET  ((uint32_t)0x00000004)  /*!< Anticipated Frame synchronisation detection */
+#define HAL_SAI_ERROR_LFSDET  ((uint32_t)0x00000008)  /*!< Late Frame synchronisation detection        */
+#define HAL_SAI_ERROR_CNREADY ((uint32_t)0x00000010)  /*!< codec not ready                             */
+#define HAL_SAI_ERROR_WCKCFG  ((uint32_t)0x00000020)  /*!< Wrong clock configuration                   */ 
+#define HAL_SAI_ERROR_TIMEOUT ((uint32_t)0x00000040)  /*!< Timeout error                               */    
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_SyncExt SAI External synchronisation
+  * @{
+  */
+#define SAI_SYNCEXT_DISABLE           ((uint32_t)0x00000000)
+#define SAI_SYNCEXT_OUTBLOCKA_ENABLE  ((uint32_t)0x00000001)
+#define SAI_SYNCEXT_OUTBLOCKB_ENABLE  ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Protocol SAI Supported protocol
+  * @{
+  */
+#define SAI_I2S_STANDARD      ((uint32_t)0x00000000)
+#define SAI_I2S_MSBJUSTIFIED  ((uint32_t)0x00000001)
+#define SAI_I2S_LSBJUSTIFIED  ((uint32_t)0x00000002)
+#define SAI_PCM_LONG          ((uint32_t)0x00000004)
+#define SAI_PCM_SHORT         ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Protocol_DataSize SAI protocol data size
+  * @{
+  */
+#define SAI_PROTOCOL_DATASIZE_16BIT          ((uint32_t)0x00000000)
+#define SAI_PROTOCOL_DATASIZE_16BITEXTENDED  ((uint32_t)0x00000001)
+#define SAI_PROTOCOL_DATASIZE_24BIT          ((uint32_t)0x00000002)
+#define SAI_PROTOCOL_DATASIZE_32BIT          ((uint32_t)0x00000004)
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Clock_Source  SAI Clock Source
+  * @{
+  */
+#define SAI_CLKSOURCE_PLLSAI             ((uint32_t)0x00000000)
+#define SAI_CLKSOURCE_PLLI2S             ((uint32_t)0x00100000)
+#define SAI_CLKSOURCE_EXT                ((uint32_t)0x00200000)
+#define SAI_CLKSOURCE_NA                 ((uint32_t)0x00400000)
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Audio_Frequency SAI Audio Frequency
+  * @{
+  */
+#define SAI_AUDIO_FREQUENCY_192K          ((uint32_t)192000)
+#define SAI_AUDIO_FREQUENCY_96K           ((uint32_t)96000)
+#define SAI_AUDIO_FREQUENCY_48K           ((uint32_t)48000)
+#define SAI_AUDIO_FREQUENCY_44K           ((uint32_t)44100)
+#define SAI_AUDIO_FREQUENCY_32K           ((uint32_t)32000)
+#define SAI_AUDIO_FREQUENCY_22K           ((uint32_t)22050)
+#define SAI_AUDIO_FREQUENCY_16K           ((uint32_t)16000)
+#define SAI_AUDIO_FREQUENCY_11K           ((uint32_t)11025)
+#define SAI_AUDIO_FREQUENCY_8K            ((uint32_t)8000)
+#define SAI_AUDIO_FREQUENCY_MCKDIV        ((uint32_t)0)    
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Mode SAI Block Mode
+  * @{
+  */
+#define SAI_MODEMASTER_TX         ((uint32_t)0x00000000)
+#define SAI_MODEMASTER_RX         ((uint32_t)SAI_xCR1_MODE_0)
+#define SAI_MODESLAVE_TX          ((uint32_t)SAI_xCR1_MODE_1)
+#define SAI_MODESLAVE_RX          ((uint32_t)(SAI_xCR1_MODE_1 | SAI_xCR1_MODE_0))
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Protocol SAI Block Protocol
+  * @{
+  */
+#define SAI_FREE_PROTOCOL                 ((uint32_t)0x00000000)
+#define SAI_SPDIF_PROTOCOL                ((uint32_t)SAI_xCR1_PRTCFG_0)
+#define SAI_AC97_PROTOCOL                 ((uint32_t)SAI_xCR1_PRTCFG_1)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Data_Size SAI Block Data Size
+  * @{
+  */
+#define SAI_DATASIZE_8                   ((uint32_t)SAI_xCR1_DS_1)
+#define SAI_DATASIZE_10                  ((uint32_t)(SAI_xCR1_DS_1 | SAI_xCR1_DS_0))
+#define SAI_DATASIZE_16                  ((uint32_t)SAI_xCR1_DS_2)
+#define SAI_DATASIZE_20                  ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_0))
+#define SAI_DATASIZE_24                  ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1))
+#define SAI_DATASIZE_32                  ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1 | SAI_xCR1_DS_0))
+
+/**
+  * @}
+  */ 
+
+/** @defgroup SAI_Block_MSB_LSB_transmission SAI Block MSB LSB transmission 
+  * @{
+  */
+#define SAI_FIRSTBIT_MSB                  ((uint32_t)0x00000000)
+#define SAI_FIRSTBIT_LSB                  ((uint32_t)SAI_xCR1_LSBFIRST)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Clock_Strobing SAI Block Clock Strobing
+  * @{
+  */
+#define SAI_CLOCKSTROBING_FALLINGEDGE     ((uint32_t)0x00000000)
+#define SAI_CLOCKSTROBING_RISINGEDGE      ((uint32_t)SAI_xCR1_CKSTR)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Synchronization SAI Block Synchronization
+  * @{
+  */
+#define SAI_ASYNCHRONOUS                  ((uint32_t)0x00000000) /*!< Asynchronous */
+#define SAI_SYNCHRONOUS                   ((uint32_t)0x00000001) /*!< Synchronous with other block of same SAI */
+#define SAI_SYNCHRONOUS_EXT_SAI1          ((uint32_t)0x00000002) /*!< Synchronous with other SAI, SAI1 */
+#define SAI_SYNCHRONOUS_EXT_SAI2          ((uint32_t)0x00000003) /*!< Synchronous with other SAI, SAI2 */
+/**
+  * @}
+  */ 
+
+/** @defgroup SAI_Block_Output_Drive SAI Block Output Drive 
+  * @{
+  */
+#define SAI_OUTPUTDRIVE_DISABLE          ((uint32_t)0x00000000)
+#define SAI_OUTPUTDRIVE_ENABLE           ((uint32_t)SAI_xCR1_OUTDRIV)
+
+/**
+  * @}
+  */ 
+
+/** @defgroup SAI_Block_NoDivider SAI Block NoDivider
+  * @{
+  */
+#define SAI_MASTERDIVIDER_ENABLE         ((uint32_t)0x00000000)
+#define SAI_MASTERDIVIDER_DISABLE        ((uint32_t)SAI_xCR1_NODIV)
+
+/**
+  * @}
+  */
+  
+
+/** @defgroup SAI_Block_FS_Definition SAI Block FS Definition
+  * @{
+  */
+#define SAI_FS_STARTFRAME                 ((uint32_t)0x00000000)
+#define SAI_FS_CHANNEL_IDENTIFICATION     ((uint32_t)SAI_xFRCR_FSDEF)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_FS_Polarity SAI Block FS Polarity 
+  * @{
+  */
+#define SAI_FS_ACTIVE_LOW                  ((uint32_t)0x00000000)
+#define SAI_FS_ACTIVE_HIGH                 ((uint32_t)SAI_xFRCR_FSPO)
+
+/**
+  * @}
+  */
+            
+/** @defgroup SAI_Block_FS_Offset SAI Block FS Offset 
+  * @{
+  */
+#define SAI_FS_FIRSTBIT                   ((uint32_t)0x00000000)
+#define SAI_FS_BEFOREFIRSTBIT             ((uint32_t)SAI_xFRCR_FSOFF)
+
+/**
+  * @}
+  */
+  
+
+  /** @defgroup SAI_Block_Slot_Size SAI Block Slot Size
+  * @{
+  */
+#define SAI_SLOTSIZE_DATASIZE             ((uint32_t)0x00000000)  
+#define SAI_SLOTSIZE_16B                  ((uint32_t)SAI_xSLOTR_SLOTSZ_0)
+#define SAI_SLOTSIZE_32B                  ((uint32_t)SAI_xSLOTR_SLOTSZ_1)
+/**
+  * @}
+  */
+  
+/** @defgroup SAI_Block_Slot_Active SAI Block Slot Active
+  * @{
+  */
+#define SAI_SLOT_NOTACTIVE           ((uint32_t)0x00000000)
+#define SAI_SLOTACTIVE_0             ((uint32_t)0x00000001)
+#define SAI_SLOTACTIVE_1             ((uint32_t)0x00000002)
+#define SAI_SLOTACTIVE_2             ((uint32_t)0x00000004)
+#define SAI_SLOTACTIVE_3             ((uint32_t)0x00000008)
+#define SAI_SLOTACTIVE_4             ((uint32_t)0x00000010)
+#define SAI_SLOTACTIVE_5             ((uint32_t)0x00000020)
+#define SAI_SLOTACTIVE_6             ((uint32_t)0x00000040)
+#define SAI_SLOTACTIVE_7             ((uint32_t)0x00000080)
+#define SAI_SLOTACTIVE_8             ((uint32_t)0x00000100)
+#define SAI_SLOTACTIVE_9             ((uint32_t)0x00000200)
+#define SAI_SLOTACTIVE_10            ((uint32_t)0x00000400)
+#define SAI_SLOTACTIVE_11            ((uint32_t)0x00000800)
+#define SAI_SLOTACTIVE_12            ((uint32_t)0x00001000)
+#define SAI_SLOTACTIVE_13            ((uint32_t)0x00002000)
+#define SAI_SLOTACTIVE_14            ((uint32_t)0x00004000)
+#define SAI_SLOTACTIVE_15            ((uint32_t)0x00008000)
+#define SAI_SLOTACTIVE_ALL           ((uint32_t)0x0000FFFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Mono_Stereo_Mode SAI Mono Stereo Mode
+  * @{
+  */
+#define SAI_STEREOMODE                    ((uint32_t)0x00000000)
+#define SAI_MONOMODE                      ((uint32_t)SAI_xCR1_MONO)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_TRIState_Management SAI TRIState Management
+  * @{
+  */
+#define SAI_OUTPUT_NOTRELEASED              ((uint32_t)0x00000000)
+#define SAI_OUTPUT_RELEASED                 ((uint32_t)SAI_xCR2_TRIS)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Fifo_Threshold SAI Block Fifo Threshold 
+  * @{
+  */
+#define SAI_FIFOTHRESHOLD_EMPTY  ((uint32_t)0x00000000)
+#define SAI_FIFOTHRESHOLD_1QF    ((uint32_t)SAI_xCR2_FTH_0)
+#define SAI_FIFOTHRESHOLD_HF     ((uint32_t)SAI_xCR2_FTH_1) 
+#define SAI_FIFOTHRESHOLD_3QF    ((uint32_t)(SAI_xCR2_FTH_1 | SAI_xCR2_FTH_0))
+#define SAI_FIFOTHRESHOLD_FULL   ((uint32_t)SAI_xCR2_FTH_2)
+
+/**
+  * @}
+  */
+  
+/** @defgroup SAI_Block_Companding_Mode SAI Block Companding Mode
+  * @{
+  */
+#define SAI_NOCOMPANDING                  ((uint32_t)0x00000000)
+#define SAI_ULAW_1CPL_COMPANDING          ((uint32_t)SAI_xCR2_COMP_1)
+#define SAI_ALAW_1CPL_COMPANDING          ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0))
+#define SAI_ULAW_2CPL_COMPANDING          ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_CPL))
+#define SAI_ALAW_2CPL_COMPANDING          ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0 | SAI_xCR2_CPL))
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Mute_Value SAI Block Mute Value
+  * @{
+  */
+#define SAI_ZERO_VALUE                     ((uint32_t)0x00000000)
+#define SAI_LAST_SENT_VALUE                 ((uint32_t)SAI_xCR2_MUTEVAL)
+
+/**
+  * @}
+  */
+
+
+/** @defgroup SAI_Block_Interrupts_Definition SAI Block Interrupts Definition
+  * @{
+  */
+#define SAI_IT_OVRUDR                     ((uint32_t)SAI_xIMR_OVRUDRIE)
+#define SAI_IT_MUTEDET                    ((uint32_t)SAI_xIMR_MUTEDETIE)
+#define SAI_IT_WCKCFG                     ((uint32_t)SAI_xIMR_WCKCFGIE)
+#define SAI_IT_FREQ                       ((uint32_t)SAI_xIMR_FREQIE)
+#define SAI_IT_CNRDY                      ((uint32_t)SAI_xIMR_CNRDYIE)
+#define SAI_IT_AFSDET                     ((uint32_t)SAI_xIMR_AFSDETIE)
+#define SAI_IT_LFSDET                     ((uint32_t)SAI_xIMR_LFSDETIE)
+
+/**
+  * @}
+  */
+
+/** @defgroup SAI_Block_Flags_Definition  SAI Block Flags Definition
+  * @{
+  */
+#define SAI_FLAG_OVRUDR                   ((uint32_t)SAI_xSR_OVRUDR)
+#define SAI_FLAG_MUTEDET                  ((uint32_t)SAI_xSR_MUTEDET)
+#define SAI_FLAG_WCKCFG                   ((uint32_t)SAI_xSR_WCKCFG)
+#define SAI_FLAG_FREQ                     ((uint32_t)SAI_xSR_FREQ)
+#define SAI_FLAG_CNRDY                    ((uint32_t)SAI_xSR_CNRDY)
+#define SAI_FLAG_AFSDET                   ((uint32_t)SAI_xSR_AFSDET)
+#define SAI_FLAG_LFSDET                   ((uint32_t)SAI_xSR_LFSDET)
+
+/**
+  * @}
+  */
+  
+/** @defgroup SAI_Block_Fifo_Status_Level   SAI Block Fifo Status Level
+  * @{
+  */
+#define SAI_FIFOSTATUS_EMPTY              ((uint32_t)0x00000000)
+#define SAI_FIFOSTATUS_LESS1QUARTERFULL   ((uint32_t)0x00010000)
+#define SAI_FIFOSTATUS_1QUARTERFULL       ((uint32_t)0x00020000)
+#define SAI_FIFOSTATUS_HALFFULL           ((uint32_t)0x00030000) 
+#define SAI_FIFOSTATUS_3QUARTERFULL       ((uint32_t)0x00040000)
+#define SAI_FIFOSTATUS_FULL               ((uint32_t)0x00050000)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Macros SAI Exported Macros
+ *  @brief macros to handle interrupts and specific configurations
+ * @{
+ */
+ 
+/** @brief Reset SAI handle state
+  * @param  __HANDLE__: specifies the SAI Handle.
+  * @retval None
+  */
+#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SAI_STATE_RESET)
+
+/** @brief  Enable or disable the specified SAI interrupts.
+  * @param  __HANDLE__: specifies the SAI Handle.
+  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
+  *         This parameter can be one of the following values:
+  *            @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable                              
+  *            @arg SAI_IT_MUTEDET: Mute detection interrupt enable                               
+  *            @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable                    
+  *            @arg SAI_IT_FREQ: FIFO request interrupt enable                                  
+  *            @arg SAI_IT_CNRDY: Codec not ready interrupt enable                               
+  *            @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable   
+  *            @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enabl
+  * @retval None
+  */
+  
+#define __HAL_SAI_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SAI_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->IMR &= (~(__INTERRUPT__)))
+ 
+/** @brief  Check if the specified SAI interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the SAI Handle.
+  *         This parameter can be SAI where x: 1, 2, or 3 to select the SAI peripheral.
+  * @param  __INTERRUPT__: specifies the SAI interrupt source to check.
+  *         This parameter can be one of the following values:
+  *            @arg SAI_IT_TXE: Tx buffer empty interrupt enable.
+  *            @arg SAI_IT_RXNE: Rx buffer not empty interrupt enable.
+  *            @arg SAI_IT_ERR: Error interrupt enable.
+  * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_SAI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Check whether the specified SAI flag is set or not.
+  * @param  __HANDLE__: specifies the SAI Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg SAI_FLAG_OVRUDR: Overrun underrun flag.
+  *            @arg SAI_FLAG_MUTEDET: Mute detection flag.
+  *            @arg SAI_FLAG_WCKCFG: Wrong Clock Configuration flag.
+  *            @arg SAI_FLAG_FREQ: FIFO request flag.
+  *            @arg SAI_FLAG_CNRDY: Codec not ready flag.
+  *            @arg SAI_FLAG_AFSDET: Anticipated frame synchronization detection flag.
+  *            @arg SAI_FLAG_LFSDET: Late frame synchronization detection flag.  
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_SAI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clears the specified SAI pending flag.
+  * @param  __HANDLE__: specifies the SAI Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg SAI_FLAG_OVRUDR: Clear Overrun underrun  
+  *            @arg SAI_FLAG_MUTEDET: Clear Mute detection 
+  *            @arg SAI_FLAG_WCKCFG: Clear Wrong Clock Configuration  
+  *            @arg SAI_FLAG_FREQ: Clear FIFO request   
+  *            @arg SAI_FLAG_CNRDY: Clear Codec not ready
+  *            @arg SAI_FLAG_AFSDET: Clear Anticipated frame synchronization detection
+  *            @arg SAI_FLAG_LFSDET: Clear Late frame synchronization detection
+  *   
+  * @retval None
+  */
+#define __HAL_SAI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR = (__FLAG__))                                        
+
+#define __HAL_SAI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |=  SAI_xCR1_SAIEN)
+#define __HAL_SAI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &=  ~SAI_xCR1_SAIEN)
+ 
+ /**
+  * @}
+  */
+
+/* Include RCC SAI Extension module */
+#include "stm32f7xx_hal_sai_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SAI_Exported_Functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  **********************************/
+/** @addtogroup SAI_Exported_Functions_Group1
+  * @{
+  */
+HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);    
+HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DeInit (SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai);
+
+/**
+  * @}
+  */
+
+/* I/O operation functions  *****************************************************/
+/** @addtogroup SAI_Exported_Functions_Group2
+  * @{
+  */
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai);
+
+/* Abort function */
+HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai);
+
+/* Mute management */
+HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val);
+HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter);
+HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai);
+
+/* SAI IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai);
+/**
+  * @}
+  */
+
+/** @addtogroup SAI_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  **************************************************/
+HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai);
+uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai);
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup SAI_Private_Types SAI Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup SAI_Private_Variables SAI Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SAI_Private_Constants SAI Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup SAI_Private_Macros
+  * @{
+  */
+#define IS_SAI_BLOCK_SYNCEXT(STATE)   (((STATE) == SAI_SYNCEXT_DISABLE)           ||\
+                                       ((STATE) == SAI_SYNCEXT_OUTBLOCKA_ENABLE)  ||\
+                                       ((STATE) == SAI_SYNCEXT_OUTBLOCKB_ENABLE))
+
+#define IS_SAI_SUPPORTED_PROTOCOL(PROTOCOL)   (((PROTOCOL) == SAI_I2S_STANDARD)     ||\
+                                               ((PROTOCOL) == SAI_I2S_MSBJUSTIFIED) ||\
+                                               ((PROTOCOL) == SAI_I2S_LSBJUSTIFIED) ||\
+                                               ((PROTOCOL) == SAI_PCM_LONG)         ||\
+                                               ((PROTOCOL) == SAI_PCM_SHORT))
+
+#define IS_SAI_PROTOCOL_DATASIZE(DATASIZE)   (((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BIT)         ||\
+                                              ((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BITEXTENDED) ||\
+                                              ((DATASIZE) == SAI_PROTOCOL_DATASIZE_24BIT)         ||\
+                                              ((DATASIZE) == SAI_PROTOCOL_DATASIZE_32BIT))
+
+#define IS_SAI_CLK_SOURCE(SOURCE) (((SOURCE) == SAI_CLKSOURCE_PLLSAI) ||\
+                                   ((SOURCE) == SAI_CLKSOURCE_PLLI2S) ||\
+                                   ((SOURCE) == SAI_CLKSOURCE_EXT))
+
+#define IS_SAI_AUDIO_FREQUENCY(AUDIO) (((AUDIO) == SAI_AUDIO_FREQUENCY_192K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_96K) || \
+                                       ((AUDIO) == SAI_AUDIO_FREQUENCY_48K)  || ((AUDIO) == SAI_AUDIO_FREQUENCY_44K) || \
+                                       ((AUDIO) == SAI_AUDIO_FREQUENCY_32K)  || ((AUDIO) == SAI_AUDIO_FREQUENCY_22K) || \
+                                       ((AUDIO) == SAI_AUDIO_FREQUENCY_16K)  || ((AUDIO) == SAI_AUDIO_FREQUENCY_11K) || \
+                                       ((AUDIO) == SAI_AUDIO_FREQUENCY_8K)   || ((AUDIO) == SAI_AUDIO_FREQUENCY_MCKDIV))
+
+#define IS_SAI_BLOCK_MODE(MODE)    (((MODE) == SAI_MODEMASTER_TX) || \
+                                    ((MODE) == SAI_MODEMASTER_RX) || \
+                                    ((MODE) == SAI_MODESLAVE_TX)  || \
+                                    ((MODE) == SAI_MODESLAVE_RX))
+
+#define IS_SAI_BLOCK_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_FREE_PROTOCOL)  || \
+                                         ((PROTOCOL) == SAI_AC97_PROTOCOL)  || \
+                                         ((PROTOCOL) == SAI_SPDIF_PROTOCOL))
+
+#define IS_SAI_BLOCK_DATASIZE(DATASIZE) (((DATASIZE) == SAI_DATASIZE_8)  || \
+                                         ((DATASIZE) == SAI_DATASIZE_10) || \
+                                         ((DATASIZE) == SAI_DATASIZE_16) || \
+                                         ((DATASIZE) == SAI_DATASIZE_20) || \
+                                         ((DATASIZE) == SAI_DATASIZE_24) || \
+                                         ((DATASIZE) == SAI_DATASIZE_32))
+
+#define IS_SAI_BLOCK_FIRST_BIT(BIT) (((BIT) == SAI_FIRSTBIT_MSB) || \
+                                     ((BIT) == SAI_FIRSTBIT_LSB))
+
+#define IS_SAI_BLOCK_CLOCK_STROBING(CLOCK) (((CLOCK) == SAI_CLOCKSTROBING_FALLINGEDGE) || \
+                                            ((CLOCK) == SAI_CLOCKSTROBING_RISINGEDGE))
+
+#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \
+                                       ((SYNCHRO) == SAI_SYNCHRONOUS)  || \
+                                       ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI1) ||\
+                                       ((SYNCHRO) == SAI_SYNCHRONOUS_EXT_SAI2))
+
+#define IS_SAI_BLOCK_OUTPUT_DRIVE(DRIVE) (((DRIVE) == SAI_OUTPUTDRIVE_DISABLE) || \
+                                          ((DRIVE) == SAI_OUTPUTDRIVE_ENABLE))
+
+#define IS_SAI_BLOCK_NODIVIDER(NODIVIDER) (((NODIVIDER) == SAI_MASTERDIVIDER_ENABLE) || \
+                                           ((NODIVIDER) == SAI_MASTERDIVIDER_DISABLE)) 
+                                           
+#define IS_SAI_BLOCK_FIFO_STATUS(STATUS) (((STATUS) == SAI_FIFOSTATUS_LESS1QUARTERFULL ) || \
+                                          ((STATUS) == SAI_FIFOSTATUS_HALFFULL)          || \
+                                          ((STATUS) == SAI_FIFOSTATUS_1QUARTERFULL)      || \
+                                          ((STATUS) == SAI_FIFOSTATUS_3QUARTERFULL)     || \
+                                          ((STATUS) == SAI_FIFOSTATUS_FULL)              || \
+                                          ((STATUS) == SAI_FIFOSTATUS_EMPTY))
+
+#define IS_SAI_BLOCK_MUTE_COUNTER(COUNTER) ((COUNTER) <= 63)
+
+#define IS_SAI_BLOCK_MUTE_VALUE(VALUE)    (((VALUE) == SAI_ZERO_VALUE)     || \
+                                           ((VALUE) == SAI_LAST_SENT_VALUE)) 
+
+#define IS_SAI_BLOCK_COMPANDING_MODE(MODE)    (((MODE) == SAI_NOCOMPANDING)         || \
+                                               ((MODE) == SAI_ULAW_1CPL_COMPANDING) || \
+                                               ((MODE) == SAI_ALAW_1CPL_COMPANDING) || \
+                                               ((MODE) == SAI_ULAW_2CPL_COMPANDING) || \
+                                               ((MODE) == SAI_ALAW_2CPL_COMPANDING)) 
+
+#define IS_SAI_BLOCK_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SAI_FIFOTHRESHOLD_EMPTY)   || \
+                                                ((THRESHOLD) == SAI_FIFOTHRESHOLD_1QF)     || \
+                                                ((THRESHOLD) == SAI_FIFOTHRESHOLD_HF)      || \
+                                                ((THRESHOLD) == SAI_FIFOTHRESHOLD_3QF)     || \
+                                                ((THRESHOLD) == SAI_FIFOTHRESHOLD_FULL))  
+
+#define IS_SAI_BLOCK_TRISTATE_MANAGEMENT(STATE) (((STATE) == SAI_OUTPUT_NOTRELEASED) ||\
+                                                 ((STATE) == SAI_OUTPUT_RELEASED)) 
+
+#define IS_SAI_MONO_STEREO_MODE(MODE) (((MODE) == SAI_MONOMODE) ||\
+                                       ((MODE) == SAI_STEREOMODE)) 
+
+#define IS_SAI_SLOT_ACTIVE(ACTIVE)  ((ACTIVE) <= SAI_SLOTACTIVE_ALL)
+
+#define IS_SAI_BLOCK_SLOT_NUMBER(NUMBER) ((1 <= (NUMBER)) && ((NUMBER) <= 16))  
+
+#define IS_SAI_BLOCK_SLOT_SIZE(SIZE) (((SIZE) == SAI_SLOTSIZE_DATASIZE) || \
+                                      ((SIZE) == SAI_SLOTSIZE_16B)      || \
+                                      ((SIZE) == SAI_SLOTSIZE_32B))
+
+#define IS_SAI_BLOCK_FIRSTBIT_OFFSET(OFFSET) ((OFFSET) <= 24) 
+
+#define IS_SAI_BLOCK_FS_OFFSET(OFFSET) (((OFFSET) == SAI_FS_FIRSTBIT) || \
+                                        ((OFFSET) == SAI_FS_BEFOREFIRSTBIT))
+
+#define IS_SAI_BLOCK_FS_POLARITY(POLARITY) (((POLARITY) == SAI_FS_ACTIVE_LOW) || \
+                                            ((POLARITY) == SAI_FS_ACTIVE_HIGH)) 
+
+#define IS_SAI_BLOCK_FS_DEFINITION(DEFINITION) (((DEFINITION) == SAI_FS_STARTFRAME) || \
+                                                ((DEFINITION) == SAI_FS_CHANNEL_IDENTIFICATION)) 
+                                                
+#define IS_SAI_BLOCK_MASTER_DIVIDER(DIVIDER) ((DIVIDER) <= 15)    
+
+#define IS_SAI_BLOCK_FRAME_LENGTH(LENGTH) ((8 <= (LENGTH)) && ((LENGTH) <= 256))      
+
+#define IS_SAI_BLOCK_ACTIVE_FRAME(LENGTH) ((1 <= (LENGTH)) && ((LENGTH) <= 128))  
+                                          
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SAI_Private_Functions SAI Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_SAI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_sai_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,182 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_sai_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   SAI Extension HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of SAI extension peripheral:
+  *           + Extension features functions
+  *         
+  @verbatim
+  ==============================================================================
+               ##### SAI peripheral extension features  #####
+  ==============================================================================
+   
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..] This driver provides functions to manage several sources to clock SAI
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SAIEx SAIEx
+  * @brief SAI Extension HAL module driver
+  * @{
+  */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* SAI registers Masks */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup SAI_Private_Functions  SAI Private Functions
+  * @{
+  */
+ /**
+  * @}
+  */
+  
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SAIEx_Exported_Functions SAI Extended Exported Functions
+  * @{
+  */
+
+/** @defgroup SAIEx_Exported_Functions_Group1 Extension features functions 
+  *  @brief   Extension features functions
+  *
+@verbatim    
+ ===============================================================================
+                       ##### Extension features Functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to manage the possible 
+    SAI clock sources.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Configure SAI Block synchronization mode
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *               the configuration information for SAI module.   
+  * @retval SAI Clock Input 
+  */
+void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai)
+{
+  uint32_t tmpregisterGCR = 0;
+ 
+  /* This setting must be done with both audio block (A & B) disabled     */
+  switch(hsai->Init.SynchroExt)
+  {
+    case SAI_SYNCEXT_DISABLE :
+      tmpregisterGCR = 0;
+      break;
+    case SAI_SYNCEXT_OUTBLOCKA_ENABLE :
+      tmpregisterGCR = SAI_GCR_SYNCOUT_0;
+      break;
+    case SAI_SYNCEXT_OUTBLOCKB_ENABLE :
+      tmpregisterGCR = SAI_GCR_SYNCOUT_1;
+      break;
+  default:
+    tmpregisterGCR = 0;
+    break;
+  }
+    
+  if((hsai->Init.Synchro) == SAI_SYNCHRONOUS_EXT_SAI2)
+  {
+        tmpregisterGCR |= SAI_GCR_SYNCIN_0;
+  }
+  
+  if((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B))
+  {
+    SAI1->GCR = tmpregisterGCR;
+  }
+  else 
+  {
+    SAI2->GCR = tmpregisterGCR;
+  }
+}
+  /**
+  * @brief  Get SAI Input Clock based on SAI source clock selection
+  * @param  hsai: pointer to a SAI_HandleTypeDef structure that contains
+  *               the configuration information for SAI module.   
+  * @retval SAI Clock Input 
+  */
+uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai)   
+{
+  /* This variable used to store the SAI_CK_x (value in Hz) */
+  uint32_t saiclocksource = 0;
+
+  if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B))
+  {
+    saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI1);
+  }
+  else /* SAI2_Block_A || SAI2_Block_B*/
+  {
+    saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI2); 
+  }
+  /* the return result is the value of SAI clock */
+  return saiclocksource;        
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_SAI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_sai_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,98 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_sai_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of SAI Extension HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_SAI_EX_H
+#define __STM32F7xx_HAL_SAI_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"  
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SAIEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/    
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SAIEx_Exported_Functions SAI Extended Exported Functions
+  * @{
+  */
+
+/** @addtogroup SAIEx_Exported_Functions_Group1 Extension features functions
+  * @{
+  */
+
+/* Extended features functions ************************************************/
+void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai);    
+uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_SAI_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_sd.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,3405 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_sd.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   SD card HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Secure Digital (SD) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State functions
+  *         
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    This driver implements a high level communication layer for read and write from/to 
+    this memory. The needed STM32 hardware resources (SDMMC and GPIO) are performed by 
+    the user in HAL_SD_MspInit() function (MSP layer).                             
+    Basically, the MSP layer configuration should be the same as we provide in the 
+    examples.
+    You can easily tailor this configuration according to hardware resources.
+
+  [..]
+    This driver is a generic layered driver for SDMMC memories which uses the HAL 
+    SDMMC driver functions to interface with SD and uSD cards devices. 
+    It is used as follows:
+ 
+    (#)Initialize the SDMMC low level resources by implement the HAL_SD_MspInit() API:
+        (##) Enable the SDMMC interface clock using __HAL_RCC_SDMMC_CLK_ENABLE(); 
+        (##) SDMMC pins configuration for SD card
+            (+++) Enable the clock for the SDMMC GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE();   
+            (+++) Configure these SDMMC pins as alternate function pull-up using HAL_GPIO_Init()
+                  and according to your pin assignment;
+        (##) DMA Configuration if you need to use DMA process (HAL_SD_ReadBlocks_DMA()
+             and HAL_SD_WriteBlocks_DMA() APIs).
+            (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE(); 
+            (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled. 
+        (##) NVIC configuration if you need to use interrupt process when using DMA transfer.
+            (+++) Configure the SDMMC and DMA interrupt priorities using functions
+                  HAL_NVIC_SetPriority(); DMA priority is superior to SDMMC's priority
+            (+++) Enable the NVIC DMA and SDMMC IRQs using function HAL_NVIC_EnableIRQ()
+            (+++) SDMMC interrupts are managed using the macros __HAL_SD_SDMMC_ENABLE_IT() 
+                  and __HAL_SD_SDMMC_DISABLE_IT() inside the communication process.
+            (+++) SDMMC interrupts pending bits are managed using the macros __HAL_SD_SDMMC_GET_IT()
+                  and __HAL_SD_SDMMC_CLEAR_IT()
+    (#) At this stage, you can perform SD read/write/erase operations after SD card initialization  
+
+         
+  *** SD Card Initialization and configuration ***
+  ================================================    
+  [..]
+    To initialize the SD Card, use the HAL_SD_Init() function.  It Initializes 
+    the SD Card and put it into StandBy State (Ready for data transfer). 
+    This function provide the following operations:
+  
+    (#) Apply the SD Card initialization process at 400KHz and check the SD Card 
+        type (Standard Capacity or High Capacity). You can change or adapt this 
+        frequency by adjusting the "ClockDiv" field. 
+        The SD Card frequency (SDMMC_CK) is computed as follows:
+  
+           SDMMC_CK = SDMMCCLK / (ClockDiv + 2)
+  
+        In initialization mode and according to the SD Card standard, 
+        make sure that the SDMMC_CK frequency doesn't exceed 400KHz.
+  
+    (#) Get the SD CID and CSD data. All these information are managed by the SDCardInfo 
+        structure. This structure provide also ready computed SD Card capacity 
+        and Block size.
+        
+        -@- These information are stored in SD handle structure in case of future use.  
+  
+    (#) Configure the SD Card Data transfer frequency. By Default, the card transfer 
+        frequency is set to 24MHz. You can change or adapt this frequency by adjusting 
+        the "ClockDiv" field.
+        In transfer mode and according to the SD Card standard, make sure that the 
+        SDMMC_CK frequency doesn't exceed 25MHz and 50MHz in High-speed mode switch.
+        To be able to use a frequency higher than 24MHz, you should use the SDMMC 
+        peripheral in bypass mode. Refer to the corresponding reference manual 
+        for more details.
+  
+    (#) Select the corresponding SD Card according to the address read with the step 2.
+    
+    (#) Configure the SD Card in wide bus mode: 4-bits data.
+  
+  *** SD Card Read operation ***
+  ==============================
+  [..] 
+    (+) You can read from SD card in polling mode by using function HAL_SD_ReadBlocks(). 
+        This function support only 512-bytes block length (the block size should be 
+        chosen as 512 bytes).
+        You can choose either one block read operation or multiple block read operation 
+        by adjusting the "NumberOfBlocks" parameter.
+
+    (+) You can read from SD card in DMA mode by using function HAL_SD_ReadBlocks_DMA().
+        This function support only 512-bytes block length (the block size should be 
+        chosen as 512 bytes).
+        You can choose either one block read operation or multiple block read operation 
+        by adjusting the "NumberOfBlocks" parameter.
+        After this, you have to call the function HAL_SD_CheckReadOperation(), to insure
+        that the read transfer is done correctly in both DMA and SD sides.
+  
+  *** SD Card Write operation ***
+  =============================== 
+  [..] 
+    (+) You can write to SD card in polling mode by using function HAL_SD_WriteBlocks(). 
+        This function support only 512-bytes block length (the block size should be 
+        chosen as 512 bytes).
+        You can choose either one block read operation or multiple block read operation 
+        by adjusting the "NumberOfBlocks" parameter.
+
+    (+) You can write to SD card in DMA mode by using function HAL_SD_WriteBlocks_DMA().
+        This function support only 512-bytes block length (the block size should be 
+        chosen as 512 byte).
+        You can choose either one block read operation or multiple block read operation 
+        by adjusting the "NumberOfBlocks" parameter.
+        After this, you have to call the function HAL_SD_CheckWriteOperation(), to insure
+        that the write transfer is done correctly in both DMA and SD sides.  
+  
+  *** SD card status ***
+  ====================== 
+  [..]
+    (+) At any time, you can check the SD Card status and get the SD card state 
+        by using the HAL_SD_GetStatus() function. This function checks first if the 
+        SD card is still connected and then get the internal SD Card transfer state.     
+    (+) You can also get the SD card SD Status register by using the HAL_SD_SendSDStatus() 
+        function.    
+
+  *** SD HAL driver macros list ***
+  ==================================
+  [..]
+    Below the list of most used macros in SD HAL driver.
+       
+    (+) __HAL_SD_SDMMC_ENABLE : Enable the SD device
+    (+) __HAL_SD_SDMMC_DISABLE : Disable the SD device
+    (+) __HAL_SD_SDMMC_DMA_ENABLE: Enable the SDMMC DMA transfer
+    (+) __HAL_SD_SDMMC_DMA_DISABLE: Disable the SDMMC DMA transfer
+    (+) __HAL_SD_SDMMC_ENABLE_IT: Enable the SD device interrupt
+    (+) __HAL_SD_SDMMC_DISABLE_IT: Disable the SD device interrupt
+    (+) __HAL_SD_SDMMC_GET_FLAG:Check whether the specified SD flag is set or not
+    (+) __HAL_SD_SDMMC_CLEAR_FLAG: Clear the SD's pending flags
+      
+    (@) You can refer to the SD HAL driver header file for more useful macros 
+      
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SD 
+  * @{
+  */
+
+#ifdef HAL_SD_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup SD_Private_Defines
+  * @{
+  */
+/** 
+  * @brief  SDMMC Data block size 
+  */ 
+#define DATA_BLOCK_SIZE                  ((uint32_t)(9 << 4))
+/** 
+  * @brief  SDMMC Static flags, Timeout, FIFO Address  
+  */
+#define SDMMC_STATIC_FLAGS               ((uint32_t)(SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_CTIMEOUT |\
+                                                    SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_RXOVERR  |\
+                                                    SDMMC_FLAG_CMDREND  | SDMMC_FLAG_CMDSENT  | SDMMC_FLAG_DATAEND  |\
+                                                    SDMMC_FLAG_DBCKEND))  
+
+#define SDMMC_CMD0TIMEOUT                ((uint32_t)0x00010000)
+
+/** 
+  * @brief  Mask for errors Card Status R1 (OCR Register) 
+  */
+#define SD_OCR_ADDR_OUT_OF_RANGE        ((uint32_t)0x80000000)
+#define SD_OCR_ADDR_MISALIGNED          ((uint32_t)0x40000000)
+#define SD_OCR_BLOCK_LEN_ERR            ((uint32_t)0x20000000)
+#define SD_OCR_ERASE_SEQ_ERR            ((uint32_t)0x10000000)
+#define SD_OCR_BAD_ERASE_PARAM          ((uint32_t)0x08000000)
+#define SD_OCR_WRITE_PROT_VIOLATION     ((uint32_t)0x04000000)
+#define SD_OCR_LOCK_UNLOCK_FAILED       ((uint32_t)0x01000000)
+#define SD_OCR_COM_CRC_FAILED           ((uint32_t)0x00800000)
+#define SD_OCR_ILLEGAL_CMD              ((uint32_t)0x00400000)
+#define SD_OCR_CARD_ECC_FAILED          ((uint32_t)0x00200000)
+#define SD_OCR_CC_ERROR                 ((uint32_t)0x00100000)
+#define SD_OCR_GENERAL_UNKNOWN_ERROR    ((uint32_t)0x00080000)
+#define SD_OCR_STREAM_READ_UNDERRUN     ((uint32_t)0x00040000)
+#define SD_OCR_STREAM_WRITE_OVERRUN     ((uint32_t)0x00020000)
+#define SD_OCR_CID_CSD_OVERWRITE        ((uint32_t)0x00010000)
+#define SD_OCR_WP_ERASE_SKIP            ((uint32_t)0x00008000)
+#define SD_OCR_CARD_ECC_DISABLED        ((uint32_t)0x00004000)
+#define SD_OCR_ERASE_RESET              ((uint32_t)0x00002000)
+#define SD_OCR_AKE_SEQ_ERROR            ((uint32_t)0x00000008)
+#define SD_OCR_ERRORBITS                ((uint32_t)0xFDFFE008)
+
+/** 
+  * @brief  Masks for R6 Response 
+  */
+#define SD_R6_GENERAL_UNKNOWN_ERROR     ((uint32_t)0x00002000)
+#define SD_R6_ILLEGAL_CMD               ((uint32_t)0x00004000)
+#define SD_R6_COM_CRC_FAILED            ((uint32_t)0x00008000)
+
+#define SD_VOLTAGE_WINDOW_SD            ((uint32_t)0x80100000)
+#define SD_HIGH_CAPACITY                ((uint32_t)0x40000000)
+#define SD_STD_CAPACITY                 ((uint32_t)0x00000000)
+#define SD_CHECK_PATTERN                ((uint32_t)0x000001AA)
+
+#define SD_MAX_VOLT_TRIAL               ((uint32_t)0x0000FFFF)
+#define SD_ALLZERO                      ((uint32_t)0x00000000)
+
+#define SD_WIDE_BUS_SUPPORT             ((uint32_t)0x00040000)
+#define SD_SINGLE_BUS_SUPPORT           ((uint32_t)0x00010000)
+#define SD_CARD_LOCKED                  ((uint32_t)0x02000000)
+
+#define SD_DATATIMEOUT                  ((uint32_t)0xFFFFFFFF)
+#define SD_0TO7BITS                     ((uint32_t)0x000000FF)
+#define SD_8TO15BITS                    ((uint32_t)0x0000FF00)
+#define SD_16TO23BITS                   ((uint32_t)0x00FF0000)
+#define SD_24TO31BITS                   ((uint32_t)0xFF000000)
+#define SD_MAX_DATA_LENGTH              ((uint32_t)0x01FFFFFF)
+
+#define SD_HALFFIFO                     ((uint32_t)0x00000008)
+#define SD_HALFFIFOBYTES                ((uint32_t)0x00000020)
+
+/** 
+  * @brief  Command Class Supported 
+  */
+#define SD_CCCC_LOCK_UNLOCK             ((uint32_t)0x00000080)
+#define SD_CCCC_WRITE_PROT              ((uint32_t)0x00000040)
+#define SD_CCCC_ERASE                   ((uint32_t)0x00000020)
+
+/** 
+  * @brief  Following commands are SD Card Specific commands.
+  *         SDMMC_APP_CMD should be sent before sending these commands. 
+  */
+#define SD_SDMMC_SEND_IF_COND            ((uint32_t)SD_CMD_HS_SEND_EXT_CSD)
+/**
+  * @}
+  */
+  
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SD_Private_Functions SD Private Functions
+  * @{
+  */
+static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr);
+static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd); 
+static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus);
+static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus);
+static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD);
+static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA);
+static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd);
+static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR);  
+static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma);
+static void SD_DMA_RxError(DMA_HandleTypeDef *hdma);
+static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma);
+static void SD_DMA_TxError(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SD_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup SD_Exported_Functions_Group1
+ *  @brief   Initialization and de-initialization functions 
+ *
+@verbatim    
+  ==============================================================================
+          ##### Initialization and de-initialization functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to initialize/de-initialize the SD
+    card device to be ready for use.
+      
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the SD card according to the specified parameters in the 
+            SD_HandleTypeDef and create the associated handle.
+  * @param  hsd: SD handle
+  * @param  SDCardInfo: HAL_SD_CardInfoTypedef structure for SD card information   
+  * @retval HAL SD error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo)
+{ 
+  __IO HAL_SD_ErrorTypedef errorstate = SD_OK;
+  SD_InitTypeDef tmpinit;
+  
+  /* Allocate lock resource and initialize it */
+  hsd->Lock = HAL_UNLOCKED;
+  
+  /* Initialize the low level hardware (MSP) */
+  HAL_SD_MspInit(hsd);
+  
+  /* Default SDMMC peripheral configuration for SD card initialization */
+  tmpinit.ClockEdge           = SDMMC_CLOCK_EDGE_RISING;
+  tmpinit.ClockBypass         = SDMMC_CLOCK_BYPASS_DISABLE;
+  tmpinit.ClockPowerSave      = SDMMC_CLOCK_POWER_SAVE_DISABLE;
+  tmpinit.BusWide             = SDMMC_BUS_WIDE_1B;
+  tmpinit.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE;
+  tmpinit.ClockDiv            = SDMMC_INIT_CLK_DIV;
+  
+  /* Initialize SDMMC peripheral interface with default configuration */
+  SDMMC_Init(hsd->Instance, tmpinit);
+  
+  /* Identify card operating voltage */
+  errorstate = SD_PowerON(hsd); 
+  
+  if(errorstate != SD_OK)     
+  {
+    return errorstate;
+  }
+  
+  /* Initialize the present SDMMC card(s) and put them in idle state */
+  errorstate = SD_Initialize_Cards(hsd);
+  
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Read CSD/CID MSD registers */
+  errorstate = HAL_SD_Get_CardInfo(hsd, SDCardInfo);
+  
+  if (errorstate == SD_OK)
+  {
+    /* Select the Card */
+    errorstate = SD_Select_Deselect(hsd, (uint32_t)(((uint32_t)SDCardInfo->RCA) << 16));
+  }
+  
+  /* Configure SDMMC peripheral interface */
+  SDMMC_Init(hsd->Instance, hsd->Init);   
+  
+  return errorstate;
+}
+
+/**
+  * @brief  De-Initializes the SD card.
+  * @param  hsd: SD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd)
+{
+  
+  /* Set SD power state to off */ 
+  SD_PowerOFF(hsd);
+  
+  /* De-Initialize the MSP layer */
+  HAL_SD_MspDeInit(hsd);
+  
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initializes the SD MSP.
+  * @param  hsd: SD handle
+  * @retval None
+  */
+__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsd);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  De-Initialize SD MSP.
+  * @param  hsd: SD handle
+  * @retval None
+  */
+__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsd);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup SD_Exported_Functions_Group2
+ *  @brief   Data transfer functions 
+ *
+@verbatim   
+  ==============================================================================
+                        ##### IO operation functions #####
+  ==============================================================================  
+  [..]
+    This subsection provides a set of functions allowing to manage the data 
+    transfer from/to SD card.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Reads block(s) from a specified address in a card. The Data transfer 
+  *         is managed by polling mode.  
+  * @param  hsd: SD handle
+  * @param  pReadBuffer: pointer to the buffer that will contain the received data
+  * @param  ReadAddr: Address from where data is to be read  
+  * @param  BlockSize: SD card Data block size 
+  *   @note BlockSize must be 512 bytes.
+  * @param  NumberOfBlocks: Number of SD blocks to read   
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+  SDMMC_CmdInitTypeDef  sdmmc_cmdinitstructure;
+  SDMMC_DataInitTypeDef sdmmc_datainitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t count = 0, *tempbuff = (uint32_t *)pReadBuffer;
+  
+  /* Initialize data control register */
+  hsd->Instance->DCTRL = 0;
+  
+  if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+  {
+    BlockSize = 512;
+    ReadAddr /= 512;
+  }
+  
+  /* Set Block Size for Card */ 
+  sdmmc_cmdinitstructure.Argument         = (uint32_t) BlockSize;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+  sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+  sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+  sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+  
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Configure the SD DPSM (Data Path State Machine) */
+  sdmmc_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+  sdmmc_datainitstructure.DataLength    = NumberOfBlocks * BlockSize;
+  sdmmc_datainitstructure.DataBlockSize = DATA_BLOCK_SIZE;
+  sdmmc_datainitstructure.TransferDir   = SDMMC_TRANSFER_DIR_TO_SDMMC;
+  sdmmc_datainitstructure.TransferMode  = SDMMC_TRANSFER_MODE_BLOCK;
+  sdmmc_datainitstructure.DPSM          = SDMMC_DPSM_ENABLE;
+  SDMMC_DataConfig(hsd->Instance, &sdmmc_datainitstructure);
+  
+  if(NumberOfBlocks > 1)
+  {
+    /* Send CMD18 READ_MULT_BLOCK with argument data address */
+    sdmmc_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK;
+  }
+  else
+  {
+    /* Send CMD17 READ_SINGLE_BLOCK */
+    sdmmc_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK;    
+  }
+  
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)ReadAddr;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Read block(s) in polling mode */
+  if(NumberOfBlocks > 1)
+  {
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK);
+    
+    if (errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+    
+    /* Poll on SDMMC flags */
+    while(!__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND))
+    {
+      if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF))
+      {
+        /* Read data from SDMMC Rx FIFO */
+        for (count = 0; count < 8; count++)
+        {
+          *(tempbuff + count) = SDMMC_ReadFIFO(hsd->Instance);
+        }
+        
+        tempbuff += 8;
+      }
+    }      
+  }
+  else
+  {
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK); 
+    
+    if (errorstate != SD_OK)
+    {
+      return errorstate;
+    }    
+    
+    /* In case of single block transfer, no need of stop transfer at all */
+    while(!__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND))
+    {
+      if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF))
+      {
+        /* Read data from SDMMC Rx FIFO */
+        for (count = 0; count < 8; count++)
+        {
+          *(tempbuff + count) = SDMMC_ReadFIFO(hsd->Instance);
+        }
+        
+        tempbuff += 8;
+      }
+    }   
+  }
+  
+  /* Send stop transmission command in case of multiblock read */
+  if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_DATAEND) && (NumberOfBlocks > 1))
+  {    
+    if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) ||\
+      (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+        (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+    {
+      /* Send stop transmission command */
+      errorstate = HAL_SD_StopTransfer(hsd);
+    }
+  }
+  
+  /* Get error state */
+  if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT);
+    
+    errorstate = SD_DATA_TIMEOUT;
+    
+    return errorstate;
+  }
+  else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL);
+    
+    errorstate = SD_DATA_CRC_FAIL;
+    
+    return errorstate;
+  }
+  else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR);
+    
+    errorstate = SD_RX_OVERRUN;
+    
+    return errorstate;
+  }
+  else
+  {
+    /* No error flag set */
+  }
+  
+  count = SD_DATATIMEOUT;
+  
+  /* Empty FIFO if there is still any data */
+  while ((__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXDAVL)) && (count > 0))
+  {
+    *tempbuff = SDMMC_ReadFIFO(hsd->Instance);
+    tempbuff++;
+    count--;
+  }
+  
+  /* Clear all the static flags */
+  __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Allows to write block(s) to a specified address in a card. The Data
+  *         transfer is managed by polling mode.  
+  * @param  hsd: SD handle
+  * @param  pWriteBuffer: pointer to the buffer that will contain the data to transmit
+  * @param  WriteAddr: Address from where data is to be written 
+  * @param  BlockSize: SD card Data block size 
+  * @note   BlockSize must be 512 bytes.
+  * @param  NumberOfBlocks: Number of SD blocks to write 
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure;
+  SDMMC_DataInitTypeDef sdmmc_datainitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t totalnumberofbytes = 0, bytestransferred = 0, count = 0, restwords = 0;
+  uint32_t *tempbuff = (uint32_t *)pWriteBuffer;
+  uint8_t cardstate  = 0;
+  
+  /* Initialize data control register */
+  hsd->Instance->DCTRL = 0;
+  
+  if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+  {
+    BlockSize = 512;
+    WriteAddr /= 512;
+  }
+  
+  /* Set Block Size for Card */ 
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)BlockSize;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+  sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+  sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+  sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+  
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  if(NumberOfBlocks > 1)
+  {
+    /* Send CMD25 WRITE_MULT_BLOCK with argument data address */
+    sdmmc_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK;
+  }
+  else
+  {
+    /* Send CMD24 WRITE_SINGLE_BLOCK */
+    sdmmc_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK;
+  }
+  
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)WriteAddr;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  if(NumberOfBlocks > 1)
+  {
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK);
+  }
+  else
+  {
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK);
+  }  
+  
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Set total number of bytes to write */
+  totalnumberofbytes = NumberOfBlocks * BlockSize;
+  
+  /* Configure the SD DPSM (Data Path State Machine) */ 
+  sdmmc_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+  sdmmc_datainitstructure.DataLength    = NumberOfBlocks * BlockSize;
+  sdmmc_datainitstructure.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B;
+  sdmmc_datainitstructure.TransferDir   = SDMMC_TRANSFER_DIR_TO_CARD;
+  sdmmc_datainitstructure.TransferMode  = SDMMC_TRANSFER_MODE_BLOCK;
+  sdmmc_datainitstructure.DPSM          = SDMMC_DPSM_ENABLE;
+  SDMMC_DataConfig(hsd->Instance, &sdmmc_datainitstructure);
+  
+  /* Write block(s) in polling mode */
+  if(NumberOfBlocks > 1)
+  {
+    while(!__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DATAEND))
+    {
+      if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_TXFIFOHE))
+      {
+        if ((totalnumberofbytes - bytestransferred) < 32)
+        {
+          restwords = ((totalnumberofbytes - bytestransferred) % 4 == 0) ? ((totalnumberofbytes - bytestransferred) / 4) : (( totalnumberofbytes -  bytestransferred) / 4 + 1);
+          
+          /* Write data to SDMMC Tx FIFO */
+          for (count = 0; count < restwords; count++)
+          {
+            SDMMC_WriteFIFO(hsd->Instance, tempbuff);
+            tempbuff++;
+            bytestransferred += 4;
+          }
+        }
+        else
+        {
+          /* Write data to SDMMC Tx FIFO */
+          for (count = 0; count < 8; count++)
+          {
+            SDMMC_WriteFIFO(hsd->Instance, (tempbuff + count));
+          }
+          
+          tempbuff += 8;
+          bytestransferred += 32;
+        }
+      }
+    }   
+  }
+  else
+  {
+    /* In case of single data block transfer no need of stop command at all */ 
+    while(!__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_TXUNDERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND))
+    {
+      if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_TXFIFOHE))
+      {
+        if ((totalnumberofbytes - bytestransferred) < 32)
+        {
+          restwords = ((totalnumberofbytes - bytestransferred) % 4 == 0) ? ((totalnumberofbytes - bytestransferred) / 4) : (( totalnumberofbytes -  bytestransferred) / 4 + 1);
+          
+          /* Write data to SDMMC Tx FIFO */
+          for (count = 0; count < restwords; count++)
+          {
+            SDMMC_WriteFIFO(hsd->Instance, tempbuff);
+            tempbuff++; 
+            bytestransferred += 4;
+          }
+        }
+        else
+        {
+          /* Write data to SDMMC Tx FIFO */
+          for (count = 0; count < 8; count++)
+          {
+            SDMMC_WriteFIFO(hsd->Instance, (tempbuff + count));
+          }
+          
+          tempbuff += 8;
+          bytestransferred += 32;
+        }
+      }
+    }  
+  }
+  
+  /* Send stop transmission command in case of multiblock write */
+  if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_DATAEND) && (NumberOfBlocks > 1))
+  {    
+    if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+      (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+    {
+      /* Send stop transmission command */
+      errorstate = HAL_SD_StopTransfer(hsd);
+    }
+  }
+  
+  /* Get error state */
+  if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT);
+    
+    errorstate = SD_DATA_TIMEOUT;
+    
+    return errorstate;
+  }
+  else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL);
+    
+    errorstate = SD_DATA_CRC_FAIL;
+    
+    return errorstate;
+  }
+  else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_TXUNDERR))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_TXUNDERR);
+    
+    errorstate = SD_TX_UNDERRUN;
+    
+    return errorstate;
+  }
+  else
+  {
+    /* No error flag set */
+  }
+  
+  /* Clear all the static flags */
+  __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+  
+  /* Wait till the card is in programming state */
+  errorstate = SD_IsCardProgramming(hsd, &cardstate);
+  
+  while ((errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING)))
+  {
+    errorstate = SD_IsCardProgramming(hsd, &cardstate);
+  }
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Reads block(s) from a specified address in a card. The Data transfer 
+  *         is managed by DMA mode. 
+  * @note   This API should be followed by the function HAL_SD_CheckReadOperation()
+  *         to check the completion of the read process   
+  * @param  hsd: SD handle                 
+  * @param  pReadBuffer: Pointer to the buffer that will contain the received data
+  * @param  ReadAddr: Address from where data is to be read  
+  * @param  BlockSize: SD card Data block size 
+  * @note   BlockSize must be 512 bytes.
+  * @param  NumberOfBlocks: Number of blocks to read.
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure;
+  SDMMC_DataInitTypeDef sdmmc_datainitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  
+  /* Initialize data control register */
+  hsd->Instance->DCTRL = 0;
+  
+  /* Initialize handle flags */
+  hsd->SdTransferCplt  = 0;
+  hsd->DmaTransferCplt = 0;
+  hsd->SdTransferErr   = SD_OK; 
+  
+  /* Initialize SD Read operation */
+  if(NumberOfBlocks > 1)
+  {
+    hsd->SdOperation = SD_READ_MULTIPLE_BLOCK;
+  }
+  else
+  {
+    hsd->SdOperation = SD_READ_SINGLE_BLOCK;
+  }
+  
+  /* Enable transfer interrupts */
+  __HAL_SD_SDMMC_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL |\
+                                 SDMMC_IT_DTIMEOUT |\
+                                 SDMMC_IT_DATAEND  |\
+                                 SDMMC_IT_RXOVERR));
+  
+  /* Enable SDMMC DMA transfer */
+  __HAL_SD_SDMMC_DMA_ENABLE(hsd);
+  
+  /* Configure DMA user callbacks */
+  hsd->hdmarx->XferCpltCallback  = SD_DMA_RxCplt;
+  hsd->hdmarx->XferErrorCallback = SD_DMA_RxError;
+  
+  /* Enable the DMA Channel */
+  HAL_DMA_Start_IT(hsd->hdmarx, (uint32_t)&hsd->Instance->FIFO, (uint32_t)pReadBuffer, (uint32_t)(BlockSize * NumberOfBlocks)/4);
+  
+  if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+  {
+    BlockSize = 512;
+    ReadAddr /= 512;
+  }
+  
+  /* Set Block Size for Card */ 
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)BlockSize;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+  sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+  sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+  sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+  
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Configure the SD DPSM (Data Path State Machine) */ 
+  sdmmc_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+  sdmmc_datainitstructure.DataLength    = BlockSize * NumberOfBlocks;
+  sdmmc_datainitstructure.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B;
+  sdmmc_datainitstructure.TransferDir   = SDMMC_TRANSFER_DIR_TO_SDMMC;
+  sdmmc_datainitstructure.TransferMode  = SDMMC_TRANSFER_MODE_BLOCK;
+  sdmmc_datainitstructure.DPSM          = SDMMC_DPSM_ENABLE;
+  SDMMC_DataConfig(hsd->Instance, &sdmmc_datainitstructure);
+  
+  /* Check number of blocks command */
+  if(NumberOfBlocks > 1)
+  {
+    /* Send CMD18 READ_MULT_BLOCK with argument data address */
+    sdmmc_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK;
+  }
+  else
+  {
+    /* Send CMD17 READ_SINGLE_BLOCK */
+    sdmmc_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK;
+  }
+  
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)ReadAddr;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  if(NumberOfBlocks > 1)
+  {
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK);
+  }
+  else
+  {
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK);
+  }
+  
+  /* Update the SD transfer error in SD handle */
+  hsd->SdTransferErr = errorstate;
+  
+  return errorstate;
+}
+
+
+/**
+  * @brief  Writes block(s) to a specified address in a card. The Data transfer 
+  *         is managed by DMA mode. 
+  * @note   This API should be followed by the function HAL_SD_CheckWriteOperation()
+  *         to check the completion of the write process (by SD current status polling).  
+  * @param  hsd: SD handle
+  * @param  pWriteBuffer: pointer to the buffer that will contain the data to transmit
+  * @param  WriteAddr: Address from where data is to be read   
+  * @param  BlockSize: the SD card Data block size 
+  * @note   BlockSize must be 512 bytes.
+  * @param  NumberOfBlocks: Number of blocks to write
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
+{
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure;
+  SDMMC_DataInitTypeDef sdmmc_datainitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  
+  /* Initialize data control register */
+  hsd->Instance->DCTRL = 0;
+  
+  /* Initialize handle flags */
+  hsd->SdTransferCplt  = 0;
+  hsd->DmaTransferCplt = 0;
+  hsd->SdTransferErr   = SD_OK;
+  
+  /* Initialize SD Write operation */
+  if(NumberOfBlocks > 1)
+  {
+    hsd->SdOperation = SD_WRITE_MULTIPLE_BLOCK;
+  }
+  else
+  {
+    hsd->SdOperation = SD_WRITE_SINGLE_BLOCK;
+  }  
+  
+  /* Enable transfer interrupts */
+  __HAL_SD_SDMMC_ENABLE_IT(hsd, (SDMMC_IT_DCRCFAIL |\
+                                 SDMMC_IT_DTIMEOUT |\
+                                 SDMMC_IT_DATAEND  |\
+                                 SDMMC_IT_TXUNDERR)); 
+  
+  /* Configure DMA user callbacks */
+  hsd->hdmatx->XferCpltCallback  = SD_DMA_TxCplt;
+  hsd->hdmatx->XferErrorCallback = SD_DMA_TxError;
+  
+  /* Enable the DMA Channel */
+  HAL_DMA_Start_IT(hsd->hdmatx, (uint32_t)pWriteBuffer, (uint32_t)&hsd->Instance->FIFO, (uint32_t)(BlockSize * NumberOfBlocks)/4);
+
+  /* Enable SDMMC DMA transfer */
+  __HAL_SD_SDMMC_DMA_ENABLE(hsd);
+  
+  if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+  {
+    BlockSize = 512;
+    WriteAddr /= 512;
+  }
+
+  /* Set Block Size for Card */ 
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)BlockSize;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+  sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+  sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+  sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Check number of blocks command */
+  if(NumberOfBlocks <= 1)
+  {
+    /* Send CMD24 WRITE_SINGLE_BLOCK */
+    sdmmc_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK;
+  }
+  else
+  {
+    /* Send CMD25 WRITE_MULT_BLOCK with argument data address */
+    sdmmc_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK;
+  }
+  
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)WriteAddr;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+
+  /* Check for error conditions */
+  if(NumberOfBlocks > 1)
+  {
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK);
+  }
+  else
+  {
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK);
+  }
+  
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Configure the SD DPSM (Data Path State Machine) */ 
+  sdmmc_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+  sdmmc_datainitstructure.DataLength    = BlockSize * NumberOfBlocks;
+  sdmmc_datainitstructure.DataBlockSize = SDMMC_DATABLOCK_SIZE_512B;
+  sdmmc_datainitstructure.TransferDir   = SDMMC_TRANSFER_DIR_TO_CARD;
+  sdmmc_datainitstructure.TransferMode  = SDMMC_TRANSFER_MODE_BLOCK;
+  sdmmc_datainitstructure.DPSM          = SDMMC_DPSM_ENABLE;
+  SDMMC_DataConfig(hsd->Instance, &sdmmc_datainitstructure);
+  
+  hsd->SdTransferErr = errorstate;
+  
+  return errorstate;
+}
+
+/**
+  * @brief  This function waits until the SD DMA data read transfer is finished. 
+  *         This API should be called after HAL_SD_ReadBlocks_DMA() function
+  *         to insure that all data sent by the card is already transferred by the 
+  *         DMA controller.
+  * @param  hsd: SD handle
+  * @param  Timeout: Timeout duration  
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t timeout = Timeout;
+  uint32_t tmp1, tmp2;
+  HAL_SD_ErrorTypedef tmp3;
+  
+  /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */
+  tmp1 = hsd->DmaTransferCplt; 
+  tmp2 = hsd->SdTransferCplt;
+  tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+    
+  while (((tmp1 & tmp2) == 0) && (tmp3 == SD_OK) && (timeout > 0))
+  {
+    tmp1 = hsd->DmaTransferCplt; 
+    tmp2 = hsd->SdTransferCplt;
+    tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;    
+    timeout--;
+  }
+
+  timeout = Timeout;
+  
+  /* Wait until the Rx transfer is no longer active */
+  while((__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXACT)) && (timeout > 0))
+  {
+    timeout--;  
+  }
+  
+  /* Send stop command in multiblock read */
+  if (hsd->SdOperation == SD_READ_MULTIPLE_BLOCK)
+  {
+    errorstate = HAL_SD_StopTransfer(hsd);
+  }
+  
+  if ((timeout == 0) && (errorstate == SD_OK))
+  {
+    errorstate = SD_DATA_TIMEOUT;
+  }
+  
+  /* Clear all the static flags */
+  __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+  
+  /* Return error state */
+  if (hsd->SdTransferErr != SD_OK)
+  {
+    return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr);
+  }
+  
+  return errorstate;
+}
+
+/**
+  * @brief  This function waits until the SD DMA data write transfer is finished. 
+  *         This API should be called after HAL_SD_WriteBlocks_DMA() function
+  *         to insure that all data sent by the card is already transferred by the 
+  *         DMA controller.
+  * @param  hsd: SD handle
+  * @param  Timeout: Timeout duration  
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t timeout = Timeout;
+  uint32_t tmp1, tmp2;
+  HAL_SD_ErrorTypedef tmp3;
+
+  /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */
+  tmp1 = hsd->DmaTransferCplt; 
+  tmp2 = hsd->SdTransferCplt;
+  tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+    
+  while (((tmp1 & tmp2) == 0) && (tmp3 == SD_OK) && (timeout > 0))
+  {
+    tmp1 = hsd->DmaTransferCplt; 
+    tmp2 = hsd->SdTransferCplt;
+    tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
+    timeout--;
+  }
+  
+  timeout = Timeout;
+  
+  /* Wait until the Tx transfer is no longer active */
+  while((__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_TXACT))  && (timeout > 0))
+  {
+    timeout--;  
+  }
+
+  /* Send stop command in multiblock write */
+  if (hsd->SdOperation == SD_WRITE_MULTIPLE_BLOCK)
+  {
+    errorstate = HAL_SD_StopTransfer(hsd);
+  }
+  
+  if ((timeout == 0) && (errorstate == SD_OK))
+  {
+    errorstate = SD_DATA_TIMEOUT;
+  }
+  
+  /* Clear all the static flags */
+  __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+  
+  /* Return error state */
+  if (hsd->SdTransferErr != SD_OK)
+  {
+    return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr);
+  }
+  
+  /* Wait until write is complete */
+  while(HAL_SD_GetStatus(hsd) != SD_TRANSFER_OK)
+  {    
+  }
+
+  return errorstate; 
+}
+
+/**
+  * @brief  Erases the specified memory area of the given SD card.
+  * @param  hsd: SD handle 
+  * @param  startaddr: Start byte address
+  * @param  endaddr: End byte address
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure;
+  
+  uint32_t delay         = 0;
+  __IO uint32_t maxdelay = 0;
+  uint8_t cardstate      = 0;
+  
+  /* Check if the card command class supports erase command */
+  if (((hsd->CSD[1] >> 20) & SD_CCCC_ERASE) == 0)
+  {
+    errorstate = SD_REQUEST_NOT_APPLICABLE;
+    
+    return errorstate;
+  }
+  
+  /* Get max delay value */
+  maxdelay = 120000 / (((hsd->Instance->CLKCR) & 0xFF) + 2);
+  
+  if((SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+  {
+    errorstate = SD_LOCK_UNLOCK_FAILED;
+    
+    return errorstate;
+  }
+  
+  /* Get start and end block for high capacity cards */
+  if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+  {
+    startaddr /= 512;
+    endaddr   /= 512;
+  }
+  
+  /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */
+  if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+    (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+  {
+    /* Send CMD32 SD_ERASE_GRP_START with argument as addr  */
+    sdmmc_cmdinitstructure.Argument         =(uint32_t)startaddr;
+    sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SD_ERASE_GRP_START;
+    sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+    sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+    sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+    SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+    
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_START);
+    
+    if (errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+    
+    /* Send CMD33 SD_ERASE_GRP_END with argument as addr  */
+    sdmmc_cmdinitstructure.Argument         = (uint32_t)endaddr;
+    sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SD_ERASE_GRP_END;
+    SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+    
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_END);
+    
+    if (errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+  }
+  
+  /* Send CMD38 ERASE */
+  sdmmc_cmdinitstructure.Argument         = 0;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_ERASE;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_ERASE);
+  
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  for (; delay < maxdelay; delay++)
+  {
+  }
+  
+  /* Wait until the card is in programming state */
+  errorstate = SD_IsCardProgramming(hsd, &cardstate);
+  
+  delay = SD_DATATIMEOUT;
+  
+  while ((delay > 0) && (errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING)))
+  {
+    errorstate = SD_IsCardProgramming(hsd, &cardstate);
+    delay--;
+  }
+  
+  return errorstate;
+}
+
+/**
+  * @brief  This function handles SD card interrupt request.
+  * @param  hsd: SD handle
+  * @retval None
+  */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd)
+{  
+  /* Check for SDMMC interrupt flags */
+  if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_IT_DATAEND))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_IT_DATAEND);  
+      
+    /* SD transfer is complete */
+    hsd->SdTransferCplt = 1;
+
+    /* No transfer error */ 
+    hsd->SdTransferErr  = SD_OK;
+
+    HAL_SD_XferCpltCallback(hsd);  
+  }  
+  else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_IT_DCRCFAIL))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL);
+    
+    hsd->SdTransferErr = SD_DATA_CRC_FAIL;
+    
+    HAL_SD_XferErrorCallback(hsd);
+    
+  }
+  else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_IT_DTIMEOUT))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT);
+    
+    hsd->SdTransferErr = SD_DATA_TIMEOUT;
+    
+    HAL_SD_XferErrorCallback(hsd);
+  }
+  else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_IT_RXOVERR))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR);
+    
+    hsd->SdTransferErr = SD_RX_OVERRUN;
+    
+    HAL_SD_XferErrorCallback(hsd);
+  }
+  else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_IT_TXUNDERR))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_TXUNDERR);
+    
+    hsd->SdTransferErr = SD_TX_UNDERRUN;
+    
+    HAL_SD_XferErrorCallback(hsd);
+  }
+  else
+  {
+    /* No error flag set */
+  }  
+
+  /* Disable all SDMMC peripheral interrupt sources */
+  __HAL_SD_SDMMC_DISABLE_IT(hsd, SDMMC_IT_DCRCFAIL | SDMMC_IT_DTIMEOUT | SDMMC_IT_DATAEND  |\
+                                 SDMMC_IT_TXFIFOHE | SDMMC_IT_RXFIFOHF | SDMMC_IT_TXUNDERR |\
+                                 SDMMC_IT_RXOVERR);                               
+}
+
+
+/**
+  * @brief  SD end of transfer callback.
+  * @param  hsd: SD handle 
+  * @retval None
+  */
+__weak void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsd);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_XferCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  SD Transfer Error callback.
+  * @param  hsd: SD handle
+  * @retval None
+  */
+__weak void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsd);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_XferErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  SD Transfer complete Rx callback in non blocking mode.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+__weak void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdma);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_DMA_RxCpltCallback could be implemented in the user file
+   */ 
+}  
+
+/**
+  * @brief  SD DMA transfer complete Rx error callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+__weak void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdma);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_DMA_RxErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  SD Transfer complete Tx callback in non blocking mode.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+__weak void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdma);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_DMA_TxCpltCallback could be implemented in the user file
+   */ 
+}  
+
+/**
+  * @brief  SD DMA transfer complete error Tx callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+__weak void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdma);
+  
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SD_DMA_TxErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup SD_Exported_Functions_Group3
+ *  @brief   management functions 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### Peripheral Control functions #####
+  ==============================================================================  
+  [..]
+    This subsection provides a set of functions allowing to control the SD card 
+    operations.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns information about specific card.
+  * @param  hsd: SD handle
+  * @param  pCardInfo: Pointer to a HAL_SD_CardInfoTypedef structure that  
+  *         contains all SD cardinformation  
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t tmp = 0;
+  
+  pCardInfo->CardType = (uint8_t)(hsd->CardType);
+  pCardInfo->RCA      = (uint16_t)(hsd->RCA);
+  
+  /* Byte 0 */
+  tmp = (hsd->CSD[0] & 0xFF000000) >> 24;
+  pCardInfo->SD_csd.CSDStruct      = (uint8_t)((tmp & 0xC0) >> 6);
+  pCardInfo->SD_csd.SysSpecVersion = (uint8_t)((tmp & 0x3C) >> 2);
+  pCardInfo->SD_csd.Reserved1      = tmp & 0x03;
+  
+  /* Byte 1 */
+  tmp = (hsd->CSD[0] & 0x00FF0000) >> 16;
+  pCardInfo->SD_csd.TAAC = (uint8_t)tmp;
+  
+  /* Byte 2 */
+  tmp = (hsd->CSD[0] & 0x0000FF00) >> 8;
+  pCardInfo->SD_csd.NSAC = (uint8_t)tmp;
+  
+  /* Byte 3 */
+  tmp = hsd->CSD[0] & 0x000000FF;
+  pCardInfo->SD_csd.MaxBusClkFrec = (uint8_t)tmp;
+  
+  /* Byte 4 */
+  tmp = (hsd->CSD[1] & 0xFF000000) >> 24;
+  pCardInfo->SD_csd.CardComdClasses = (uint16_t)(tmp << 4);
+  
+  /* Byte 5 */
+  tmp = (hsd->CSD[1] & 0x00FF0000) >> 16;
+  pCardInfo->SD_csd.CardComdClasses |= (uint16_t)((tmp & 0xF0) >> 4);
+  pCardInfo->SD_csd.RdBlockLen       = (uint8_t)(tmp & 0x0F);
+  
+  /* Byte 6 */
+  tmp = (hsd->CSD[1] & 0x0000FF00) >> 8;
+  pCardInfo->SD_csd.PartBlockRead   = (uint8_t)((tmp & 0x80) >> 7);
+  pCardInfo->SD_csd.WrBlockMisalign = (uint8_t)((tmp & 0x40) >> 6);
+  pCardInfo->SD_csd.RdBlockMisalign = (uint8_t)((tmp & 0x20) >> 5);
+  pCardInfo->SD_csd.DSRImpl         = (uint8_t)((tmp & 0x10) >> 4);
+  pCardInfo->SD_csd.Reserved2       = 0; /*!< Reserved */
+  
+  if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0))
+  {
+    pCardInfo->SD_csd.DeviceSize = (tmp & 0x03) << 10;
+    
+    /* Byte 7 */
+    tmp = (uint8_t)(hsd->CSD[1] & 0x000000FF);
+    pCardInfo->SD_csd.DeviceSize |= (tmp) << 2;
+    
+    /* Byte 8 */
+    tmp = (uint8_t)((hsd->CSD[2] & 0xFF000000) >> 24);
+    pCardInfo->SD_csd.DeviceSize |= (tmp & 0xC0) >> 6;
+    
+    pCardInfo->SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38) >> 3;
+    pCardInfo->SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07);
+    
+    /* Byte 9 */
+    tmp = (uint8_t)((hsd->CSD[2] & 0x00FF0000) >> 16);
+    pCardInfo->SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0) >> 5;
+    pCardInfo->SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1C) >> 2;
+    pCardInfo->SD_csd.DeviceSizeMul      = (tmp & 0x03) << 1;
+    /* Byte 10 */
+    tmp = (uint8_t)((hsd->CSD[2] & 0x0000FF00) >> 8);
+    pCardInfo->SD_csd.DeviceSizeMul |= (tmp & 0x80) >> 7;
+    
+    pCardInfo->CardCapacity  = (pCardInfo->SD_csd.DeviceSize + 1) ;
+    pCardInfo->CardCapacity *= (1 << (pCardInfo->SD_csd.DeviceSizeMul + 2));
+    pCardInfo->CardBlockSize = 1 << (pCardInfo->SD_csd.RdBlockLen);
+    pCardInfo->CardCapacity *= pCardInfo->CardBlockSize;
+  }
+  else if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
+  {
+    /* Byte 7 */
+    tmp = (uint8_t)(hsd->CSD[1] & 0x000000FF);
+    pCardInfo->SD_csd.DeviceSize = (tmp & 0x3F) << 16;
+    
+    /* Byte 8 */
+    tmp = (uint8_t)((hsd->CSD[2] & 0xFF000000) >> 24);
+    
+    pCardInfo->SD_csd.DeviceSize |= (tmp << 8);
+    
+    /* Byte 9 */
+    tmp = (uint8_t)((hsd->CSD[2] & 0x00FF0000) >> 16);
+    
+    pCardInfo->SD_csd.DeviceSize |= (tmp);
+    
+    /* Byte 10 */
+    tmp = (uint8_t)((hsd->CSD[2] & 0x0000FF00) >> 8);
+    
+    pCardInfo->CardCapacity = (uint64_t)(((uint64_t)pCardInfo->SD_csd.DeviceSize + 1) * 512 * 1024);
+    pCardInfo->CardBlockSize = 512;
+  }
+  else
+  {
+    /* Not supported card type */
+    errorstate = SD_ERROR;
+  }
+      
+  pCardInfo->SD_csd.EraseGrSize = (tmp & 0x40) >> 6;
+  pCardInfo->SD_csd.EraseGrMul  = (tmp & 0x3F) << 1;
+  
+  /* Byte 11 */
+  tmp = (uint8_t)(hsd->CSD[2] & 0x000000FF);
+  pCardInfo->SD_csd.EraseGrMul     |= (tmp & 0x80) >> 7;
+  pCardInfo->SD_csd.WrProtectGrSize = (tmp & 0x7F);
+  
+  /* Byte 12 */
+  tmp = (uint8_t)((hsd->CSD[3] & 0xFF000000) >> 24);
+  pCardInfo->SD_csd.WrProtectGrEnable = (tmp & 0x80) >> 7;
+  pCardInfo->SD_csd.ManDeflECC        = (tmp & 0x60) >> 5;
+  pCardInfo->SD_csd.WrSpeedFact       = (tmp & 0x1C) >> 2;
+  pCardInfo->SD_csd.MaxWrBlockLen     = (tmp & 0x03) << 2;
+  
+  /* Byte 13 */
+  tmp = (uint8_t)((hsd->CSD[3] & 0x00FF0000) >> 16);
+  pCardInfo->SD_csd.MaxWrBlockLen      |= (tmp & 0xC0) >> 6;
+  pCardInfo->SD_csd.WriteBlockPaPartial = (tmp & 0x20) >> 5;
+  pCardInfo->SD_csd.Reserved3           = 0;
+  pCardInfo->SD_csd.ContentProtectAppli = (tmp & 0x01);
+  
+  /* Byte 14 */
+  tmp = (uint8_t)((hsd->CSD[3] & 0x0000FF00) >> 8);
+  pCardInfo->SD_csd.FileFormatGrouop = (tmp & 0x80) >> 7;
+  pCardInfo->SD_csd.CopyFlag         = (tmp & 0x40) >> 6;
+  pCardInfo->SD_csd.PermWrProtect    = (tmp & 0x20) >> 5;
+  pCardInfo->SD_csd.TempWrProtect    = (tmp & 0x10) >> 4;
+  pCardInfo->SD_csd.FileFormat       = (tmp & 0x0C) >> 2;
+  pCardInfo->SD_csd.ECC              = (tmp & 0x03);
+  
+  /* Byte 15 */
+  tmp = (uint8_t)(hsd->CSD[3] & 0x000000FF);
+  pCardInfo->SD_csd.CSD_CRC   = (tmp & 0xFE) >> 1;
+  pCardInfo->SD_csd.Reserved4 = 1;
+  
+  /* Byte 0 */
+  tmp = (uint8_t)((hsd->CID[0] & 0xFF000000) >> 24);
+  pCardInfo->SD_cid.ManufacturerID = tmp;
+  
+  /* Byte 1 */
+  tmp = (uint8_t)((hsd->CID[0] & 0x00FF0000) >> 16);
+  pCardInfo->SD_cid.OEM_AppliID = tmp << 8;
+  
+  /* Byte 2 */
+  tmp = (uint8_t)((hsd->CID[0] & 0x000000FF00) >> 8);
+  pCardInfo->SD_cid.OEM_AppliID |= tmp;
+  
+  /* Byte 3 */
+  tmp = (uint8_t)(hsd->CID[0] & 0x000000FF);
+  pCardInfo->SD_cid.ProdName1 = tmp << 24;
+  
+  /* Byte 4 */
+  tmp = (uint8_t)((hsd->CID[1] & 0xFF000000) >> 24);
+  pCardInfo->SD_cid.ProdName1 |= tmp << 16;
+  
+  /* Byte 5 */
+  tmp = (uint8_t)((hsd->CID[1] & 0x00FF0000) >> 16);
+  pCardInfo->SD_cid.ProdName1 |= tmp << 8;
+  
+  /* Byte 6 */
+  tmp = (uint8_t)((hsd->CID[1] & 0x0000FF00) >> 8);
+  pCardInfo->SD_cid.ProdName1 |= tmp;
+  
+  /* Byte 7 */
+  tmp = (uint8_t)(hsd->CID[1] & 0x000000FF);
+  pCardInfo->SD_cid.ProdName2 = tmp;
+  
+  /* Byte 8 */
+  tmp = (uint8_t)((hsd->CID[2] & 0xFF000000) >> 24);
+  pCardInfo->SD_cid.ProdRev = tmp;
+  
+  /* Byte 9 */
+  tmp = (uint8_t)((hsd->CID[2] & 0x00FF0000) >> 16);
+  pCardInfo->SD_cid.ProdSN = tmp << 24;
+  
+  /* Byte 10 */
+  tmp = (uint8_t)((hsd->CID[2] & 0x0000FF00) >> 8);
+  pCardInfo->SD_cid.ProdSN |= tmp << 16;
+  
+  /* Byte 11 */
+  tmp = (uint8_t)(hsd->CID[2] & 0x000000FF);
+  pCardInfo->SD_cid.ProdSN |= tmp << 8;
+  
+  /* Byte 12 */
+  tmp = (uint8_t)((hsd->CID[3] & 0xFF000000) >> 24);
+  pCardInfo->SD_cid.ProdSN |= tmp;
+  
+  /* Byte 13 */
+  tmp = (uint8_t)((hsd->CID[3] & 0x00FF0000) >> 16);
+  pCardInfo->SD_cid.Reserved1   |= (tmp & 0xF0) >> 4;
+  pCardInfo->SD_cid.ManufactDate = (tmp & 0x0F) << 8;
+  
+  /* Byte 14 */
+  tmp = (uint8_t)((hsd->CID[3] & 0x0000FF00) >> 8);
+  pCardInfo->SD_cid.ManufactDate |= tmp;
+  
+  /* Byte 15 */
+  tmp = (uint8_t)(hsd->CID[3] & 0x000000FF);
+  pCardInfo->SD_cid.CID_CRC   = (tmp & 0xFE) >> 1;
+  pCardInfo->SD_cid.Reserved2 = 1;
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Enables wide bus operation for the requested card if supported by 
+  *         card.
+  * @param  hsd: SD handle       
+  * @param  WideMode: Specifies the SD card wide bus mode 
+  *          This parameter can be one of the following values:
+  *            @arg SDMMC_BUS_WIDE_8B: 8-bit data transfer (Only for MMC)
+  *            @arg SDMMC_BUS_WIDE_4B: 4-bit data transfer
+  *            @arg SDMMC_BUS_WIDE_1B: 1-bit data transfer
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  SDMMC_InitTypeDef tmpinit;
+  
+  /* MMC Card does not support this feature */
+  if (hsd->CardType == MULTIMEDIA_CARD)
+  {
+    errorstate = SD_UNSUPPORTED_FEATURE;
+    
+    return errorstate;
+  }
+  else if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+    (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+  {
+    if (WideMode == SDMMC_BUS_WIDE_8B)
+    {
+      errorstate = SD_UNSUPPORTED_FEATURE;
+    }
+    else if (WideMode == SDMMC_BUS_WIDE_4B)
+    {
+      errorstate = SD_WideBus_Enable(hsd);
+    }
+    else if (WideMode == SDMMC_BUS_WIDE_1B)
+    {
+      errorstate = SD_WideBus_Disable(hsd);
+    }
+    else
+    {
+      /* WideMode is not a valid argument*/
+      errorstate = SD_INVALID_PARAMETER;
+    }
+      
+    if (errorstate == SD_OK)
+    {
+      /* Configure the SDMMC peripheral */
+      tmpinit.ClockEdge           = hsd->Init.ClockEdge;
+      tmpinit.ClockBypass         = hsd->Init.ClockBypass;
+      tmpinit.ClockPowerSave      = hsd->Init.ClockPowerSave;
+      tmpinit.BusWide             = WideMode;
+      tmpinit.HardwareFlowControl = hsd->Init.HardwareFlowControl;
+      tmpinit.ClockDiv            = hsd->Init.ClockDiv;
+      SDMMC_Init(hsd->Instance, tmpinit);
+    }
+  }
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Aborts an ongoing data transfer.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd)
+{
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  
+  /* Send CMD12 STOP_TRANSMISSION  */
+  sdmmc_cmdinitstructure.Argument         = 0;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_STOP_TRANSMISSION;
+  sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+  sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+  sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_STOP_TRANSMISSION);
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Switches the SD card to High Speed mode.
+  *         This API must be used after "Transfer State"
+  * @note   This operation should be followed by the configuration 
+  *         of PLL to have SDMMCCK clock between 67 and 75 MHz
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure;
+  SDMMC_DataInitTypeDef sdmmc_datainitstructure;
+  
+  uint8_t SD_hs[64]  = {0};
+  uint32_t SD_scr[2] = {0, 0};
+  uint32_t SD_SPEC   = 0 ;
+  uint32_t count = 0, *tempbuff = (uint32_t *)SD_hs;
+  
+  /* Initialize the Data control register */
+  hsd->Instance->DCTRL = 0;
+  
+  /* Get SCR Register */
+  errorstate = SD_FindSCR(hsd, SD_scr);
+  
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Test the Version supported by the card*/ 
+  SD_SPEC = (SD_scr[1]  & 0x01000000) | (SD_scr[1]  & 0x02000000);
+  
+  if (SD_SPEC != SD_ALLZERO)
+  {
+    /* Set Block Size for Card */
+    sdmmc_cmdinitstructure.Argument         = (uint32_t)64;
+    sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+    sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+    sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+    sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+    SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+    
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+    
+    if (errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+    
+    /* Configure the SD DPSM (Data Path State Machine) */
+    sdmmc_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+    sdmmc_datainitstructure.DataLength    = 64;
+    sdmmc_datainitstructure.DataBlockSize = SDMMC_DATABLOCK_SIZE_64B ;
+    sdmmc_datainitstructure.TransferDir   = SDMMC_TRANSFER_DIR_TO_SDMMC;
+    sdmmc_datainitstructure.TransferMode  = SDMMC_TRANSFER_MODE_BLOCK;
+    sdmmc_datainitstructure.DPSM          = SDMMC_DPSM_ENABLE;
+    SDMMC_DataConfig(hsd->Instance, &sdmmc_datainitstructure);
+    
+    /* Send CMD6 switch mode */
+    sdmmc_cmdinitstructure.Argument         = 0x80FFFF01;
+    sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_HS_SWITCH;
+    SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure); 
+    
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_HS_SWITCH);
+    
+    if (errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+        
+    while(!__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND))
+    {
+      if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF))
+      {
+        for (count = 0; count < 8; count++)
+        {
+          *(tempbuff + count) = SDMMC_ReadFIFO(hsd->Instance);
+        }
+        
+        tempbuff += 8;
+      }
+    }
+    
+    if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT))
+    {
+      __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT);
+      
+      errorstate = SD_DATA_TIMEOUT;
+      
+      return errorstate;
+    }
+    else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL))
+    {
+      __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL);
+      
+      errorstate = SD_DATA_CRC_FAIL;
+      
+      return errorstate;
+    }
+    else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR))
+    {
+      __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR);
+      
+      errorstate = SD_RX_OVERRUN;
+      
+      return errorstate;
+    }
+    else
+    {
+      /* No error flag set */
+    }
+        
+    count = SD_DATATIMEOUT;
+    
+    while ((__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXDAVL)) && (count > 0))
+    {
+      *tempbuff = SDMMC_ReadFIFO(hsd->Instance);
+      tempbuff++;
+      count--;
+    }
+    
+    /* Clear all the static flags */
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+    
+    /* Test if the switch mode HS is ok */
+    if ((SD_hs[13]& 2) != 2)
+    {
+      errorstate = SD_UNSUPPORTED_FEATURE;
+    } 
+  }
+  
+  return errorstate;
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup SD_Exported_Functions_Group4
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### Peripheral State functions #####
+  ==============================================================================  
+  [..]
+    This subsection permits to get in runtime the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the current SD card's status.
+  * @param  hsd: SD handle
+  * @param  pSDstatus: Pointer to the buffer that will contain the SD card status 
+  *         SD Status register)
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus)
+{
+  SDMMC_CmdInitTypeDef  sdmmc_cmdinitstructure;
+  SDMMC_DataInitTypeDef sdmmc_datainitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t count = 0;
+  
+  /* Check SD response */
+  if ((SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+  {
+    errorstate = SD_LOCK_UNLOCK_FAILED;
+    
+    return errorstate;
+  }
+  
+  /* Set block size for card if it is not equal to current block size for card */
+  sdmmc_cmdinitstructure.Argument         = 64;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+  sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+  sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+  sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+  
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Send CMD55 */
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)(hsd->RCA << 16);
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_APP_CMD;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+  
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Configure the SD DPSM (Data Path State Machine) */ 
+  sdmmc_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+  sdmmc_datainitstructure.DataLength    = 64;
+  sdmmc_datainitstructure.DataBlockSize = SDMMC_DATABLOCK_SIZE_64B;
+  sdmmc_datainitstructure.TransferDir   = SDMMC_TRANSFER_DIR_TO_SDMMC;
+  sdmmc_datainitstructure.TransferMode  = SDMMC_TRANSFER_MODE_BLOCK;
+  sdmmc_datainitstructure.DPSM          = SDMMC_DPSM_ENABLE;
+  SDMMC_DataConfig(hsd->Instance, &sdmmc_datainitstructure);
+  
+  /* Send ACMD13 (SD_APP_STAUS)  with argument as card's RCA */
+  sdmmc_cmdinitstructure.Argument         = 0;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SD_APP_STATUS;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_STATUS);
+  
+  if (errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Get status data */
+  while(!__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND))
+  {
+    if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXFIFOHF))
+    {
+      for (count = 0; count < 8; count++)
+      {
+        *(pSDstatus + count) = SDMMC_ReadFIFO(hsd->Instance);
+      }
+      
+      pSDstatus += 8;
+    }
+  }
+  
+  if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT);
+    
+    errorstate = SD_DATA_TIMEOUT;
+    
+    return errorstate;
+  }
+  else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL);
+    
+    errorstate = SD_DATA_CRC_FAIL;
+    
+    return errorstate;
+  }
+  else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR);
+    
+    errorstate = SD_RX_OVERRUN;
+    
+    return errorstate;
+  }
+  else
+  {
+    /* No error flag set */
+  }  
+  
+  count = SD_DATATIMEOUT;
+  while ((__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXDAVL)) && (count > 0))
+  {
+    *pSDstatus = SDMMC_ReadFIFO(hsd->Instance);
+    pSDstatus++;
+    count--;
+  }
+  
+  /* Clear all the static status flags*/
+  __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Gets the current sd card data status.
+  * @param  hsd: SD handle
+  * @retval Data Transfer state
+  */
+HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd)
+{
+  HAL_SD_CardStateTypedef cardstate =  SD_CARD_TRANSFER;
+
+  /* Get SD card state */
+  cardstate = SD_GetState(hsd);
+  
+  /* Find SD status according to card state*/
+  if (cardstate == SD_CARD_TRANSFER)
+  {
+    return SD_TRANSFER_OK;
+  }
+  else if(cardstate == SD_CARD_ERROR)
+  {
+    return SD_TRANSFER_ERROR;
+  }
+  else
+  {
+    return SD_TRANSFER_BUSY;
+  }
+}
+
+/**
+  * @brief  Gets the SD card status.
+  * @param  hsd: SD handle      
+  * @param  pCardStatus: Pointer to the HAL_SD_CardStatusTypedef structure that 
+  *         will contain the SD card status information 
+  * @retval SD Card error state
+  */
+HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t tmp = 0;
+  uint32_t sd_status[16];
+  
+  errorstate = HAL_SD_SendSDStatus(hsd, sd_status);
+  
+  if (errorstate  != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Byte 0 */
+  tmp = (sd_status[0] & 0xC0) >> 6;
+  pCardStatus->DAT_BUS_WIDTH = (uint8_t)tmp;
+  
+  /* Byte 0 */
+  tmp = (sd_status[0] & 0x20) >> 5;
+  pCardStatus->SECURED_MODE = (uint8_t)tmp;
+  
+  /* Byte 2 */
+  tmp = (sd_status[2] & 0xFF);
+  pCardStatus->SD_CARD_TYPE = (uint8_t)(tmp << 8);
+  
+  /* Byte 3 */
+  tmp = (sd_status[3] & 0xFF);
+  pCardStatus->SD_CARD_TYPE |= (uint8_t)tmp;
+  
+  /* Byte 4 */
+  tmp = (sd_status[4] & 0xFF);
+  pCardStatus->SIZE_OF_PROTECTED_AREA = (uint8_t)(tmp << 24);
+  
+  /* Byte 5 */
+  tmp = (sd_status[5] & 0xFF);
+  pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 16);
+  
+  /* Byte 6 */
+  tmp = (sd_status[6] & 0xFF);
+  pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 8);
+  
+  /* Byte 7 */
+  tmp = (sd_status[7] & 0xFF);
+  pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)tmp;
+  
+  /* Byte 8 */
+  tmp = (sd_status[8] & 0xFF);
+  pCardStatus->SPEED_CLASS = (uint8_t)tmp;
+  
+  /* Byte 9 */
+  tmp = (sd_status[9] & 0xFF);
+  pCardStatus->PERFORMANCE_MOVE = (uint8_t)tmp;
+  
+  /* Byte 10 */
+  tmp = (sd_status[10] & 0xF0) >> 4;
+  pCardStatus->AU_SIZE = (uint8_t)tmp;
+  
+  /* Byte 11 */
+  tmp = (sd_status[11] & 0xFF);
+  pCardStatus->ERASE_SIZE = (uint8_t)(tmp << 8);
+  
+  /* Byte 12 */
+  tmp = (sd_status[12] & 0xFF);
+  pCardStatus->ERASE_SIZE |= (uint8_t)tmp;
+  
+  /* Byte 13 */
+  tmp = (sd_status[13] & 0xFC) >> 2;
+  pCardStatus->ERASE_TIMEOUT = (uint8_t)tmp;
+  
+  /* Byte 13 */
+  tmp = (sd_status[13] & 0x3);
+  pCardStatus->ERASE_OFFSET = (uint8_t)tmp;
+  
+  return errorstate;
+}
+         
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+  
+/* Private function ----------------------------------------------------------*/  
+/** @addtogroup SD_Private_Functions
+  * @{
+  */
+  
+/**
+  * @brief  SD DMA transfer complete Rx callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma)
+{
+  SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  
+  /* DMA transfer is complete */
+  hsd->DmaTransferCplt = 1;
+  
+  /* Wait until SD transfer is complete */
+  while(hsd->SdTransferCplt == 0)
+  {
+  }
+  
+  /* Disable the DMA channel */
+  HAL_DMA_Abort(hdma);
+
+  /* Transfer complete user callback */
+  HAL_SD_DMA_RxCpltCallback(hsd->hdmarx);   
+}
+
+/**
+  * @brief  SD DMA transfer Error Rx callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SD_DMA_RxError(DMA_HandleTypeDef *hdma)
+{
+  SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  
+  /* Transfer complete user callback */
+  HAL_SD_DMA_RxErrorCallback(hsd->hdmarx);
+}
+
+/**
+  * @brief  SD DMA transfer complete Tx callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma)
+{
+  SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  
+  /* DMA transfer is complete */
+  hsd->DmaTransferCplt = 1;
+  
+  /* Wait until SD transfer is complete */
+  while(hsd->SdTransferCplt == 0)
+  {
+  }
+ 
+  /* Disable the DMA channel */
+  HAL_DMA_Abort(hdma);
+
+  /* Transfer complete user callback */
+  HAL_SD_DMA_TxCpltCallback(hsd->hdmatx);  
+}
+
+/**
+  * @brief  SD DMA transfer Error Tx callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SD_DMA_TxError(DMA_HandleTypeDef *hdma)
+{
+  SD_HandleTypeDef *hsd = ( SD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* Transfer complete user callback */
+  HAL_SD_DMA_TxErrorCallback(hsd->hdmatx);
+}
+
+/**
+  * @brief  Returns the SD current state.
+  * @param  hsd: SD handle
+  * @retval SD card current state
+  */
+static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd)
+{
+  uint32_t resp1 = 0;
+  
+  if (SD_SendStatus(hsd, &resp1) != SD_OK)
+  {
+    return SD_CARD_ERROR;
+  }
+  else
+  {
+    return (HAL_SD_CardStateTypedef)((resp1 >> 9) & 0x0F);
+  }
+}
+
+/**
+  * @brief  Initializes all cards or single card as the case may be Card(s) come 
+  *         into standby state.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd)
+{
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure; 
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint16_t sd_rca = 1;
+  
+  if(SDMMC_GetPowerState(hsd->Instance) == 0) /* Power off */
+  {
+    errorstate = SD_REQUEST_NOT_APPLICABLE;
+    
+    return errorstate;
+  }
+  
+  if(hsd->CardType != SECURE_DIGITAL_IO_CARD)
+  {
+    /* Send CMD2 ALL_SEND_CID */
+    sdmmc_cmdinitstructure.Argument         = 0;
+    sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_ALL_SEND_CID;
+    sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_LONG;
+    sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+    sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+    SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+    
+    /* Check for error conditions */
+    errorstate = SD_CmdResp2Error(hsd);
+    
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+    
+    /* Get Card identification number data */
+    hsd->CID[0] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1);
+    hsd->CID[1] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP2);
+    hsd->CID[2] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP3);
+    hsd->CID[3] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP4);
+  }
+  
+  if((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1)    || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
+     (hsd->CardType == SECURE_DIGITAL_IO_COMBO_CARD) || (hsd->CardType == HIGH_CAPACITY_SD_CARD))
+  {
+    /* Send CMD3 SET_REL_ADDR with argument 0 */
+    /* SD Card publishes its RCA. */
+    sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SET_REL_ADDR;
+    sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+    SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+    
+    /* Check for error conditions */
+    errorstate = SD_CmdResp6Error(hsd, SD_CMD_SET_REL_ADDR, &sd_rca);
+    
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+  }
+  
+  if (hsd->CardType != SECURE_DIGITAL_IO_CARD)
+  {
+    /* Get the SD card RCA */
+    hsd->RCA = sd_rca;
+    
+    /* Send CMD9 SEND_CSD with argument as card's RCA */
+    sdmmc_cmdinitstructure.Argument         = (uint32_t)(hsd->RCA << 16);
+    sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SEND_CSD;
+    sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_LONG;
+    SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+    
+    /* Check for error conditions */
+    errorstate = SD_CmdResp2Error(hsd);
+    
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+    
+    /* Get Card Specific Data */
+    hsd->CSD[0] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1);
+    hsd->CSD[1] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP2);
+    hsd->CSD[2] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP3);
+    hsd->CSD[3] = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP4);
+  }
+  
+  /* All cards are initialized */
+  return errorstate;
+}
+
+/**
+  * @brief  Selects od Deselects the corresponding card.
+  * @param  hsd: SD handle
+  * @param  addr: Address of the card to be selected  
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr)
+{
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  
+  /* Send CMD7 SDMMC_SEL_DESEL_CARD */
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)addr;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SEL_DESEL_CARD;
+  sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+  sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+  sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEL_DESEL_CARD);
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Enquires cards about their operating voltage and configures clock
+  *         controls and stores SD information that will be needed in future
+  *         in the SD handle.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd)
+{
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure; 
+  __IO HAL_SD_ErrorTypedef errorstate = SD_OK; 
+  uint32_t response = 0, count = 0, validvoltage = 0;
+  uint32_t sdtype = SD_STD_CAPACITY;
+  
+  /* Power ON Sequence -------------------------------------------------------*/
+  /* Disable SDMMC Clock */
+  __HAL_SD_SDMMC_DISABLE(hsd); 
+  
+  /* Set Power State to ON */
+  SDMMC_PowerState_ON(hsd->Instance);
+
+  /* 1ms: required power up waiting time before starting the SD initialization 
+     sequence */
+  HAL_Delay(1);
+  
+  /* Enable SDMMC Clock */
+  __HAL_SD_SDMMC_ENABLE(hsd);
+  
+  /* CMD0: GO_IDLE_STATE -----------------------------------------------------*/
+  /* No CMD response required */
+  sdmmc_cmdinitstructure.Argument         = 0;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_GO_IDLE_STATE;
+  sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_NO;
+  sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+  sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdError(hsd);
+  
+  if(errorstate != SD_OK)
+  {
+    /* CMD Response Timeout (wait for CMDSENT flag) */
+    return errorstate;
+  }
+  
+  /* CMD8: SEND_IF_COND ------------------------------------------------------*/
+  /* Send CMD8 to verify SD card interface operating condition */
+  /* Argument: - [31:12]: Reserved (shall be set to '0')
+  - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V)
+  - [7:0]: Check Pattern (recommended 0xAA) */
+  /* CMD Response: R7 */
+  sdmmc_cmdinitstructure.Argument         = SD_CHECK_PATTERN;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_SDMMC_SEND_IF_COND;
+  sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */ 
+  errorstate = SD_CmdResp7Error(hsd);
+  
+  if (errorstate == SD_OK)
+  {
+    /* SD Card 2.0 */
+    hsd->CardType = STD_CAPACITY_SD_CARD_V2_0; 
+    sdtype        = SD_HIGH_CAPACITY;
+  }
+  
+  /* Send CMD55 */
+  sdmmc_cmdinitstructure.Argument         = 0;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_APP_CMD;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+  
+  /* If errorstate is Command Timeout, it is a MMC card */
+  /* If errorstate is SD_OK it is a SD card: SD card 2.0 (voltage range mismatch)
+     or SD card 1.x */
+  if(errorstate == SD_OK)
+  {
+    /* SD CARD */
+    /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */
+    while((!validvoltage) && (count < SD_MAX_VOLT_TRIAL))
+    {
+      
+      /* SEND CMD55 APP_CMD with RCA as 0 */
+      sdmmc_cmdinitstructure.Argument         = 0;
+      sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_APP_CMD;
+      sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+      sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+      sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+      SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+      
+      /* Check for error conditions */
+      errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+      
+      if(errorstate != SD_OK)
+      {
+        return errorstate;
+      }
+      
+      /* Send CMD41 */
+      sdmmc_cmdinitstructure.Argument         = SD_VOLTAGE_WINDOW_SD | sdtype;
+      sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SD_APP_OP_COND;
+      sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+      sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+      sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+      SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+      
+      /* Check for error conditions */
+      errorstate = SD_CmdResp3Error(hsd);
+      
+      if(errorstate != SD_OK)
+      {
+        return errorstate;
+      }
+      
+      /* Get command response */
+      response = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1);
+      
+      /* Get operating voltage*/
+      validvoltage = (((response >> 31) == 1) ? 1 : 0);
+      
+      count++;
+    }
+    
+    if(count >= SD_MAX_VOLT_TRIAL)
+    {
+      errorstate = SD_INVALID_VOLTRANGE;
+      
+      return errorstate;
+    }
+    
+    if((response & SD_HIGH_CAPACITY) == SD_HIGH_CAPACITY) /* (response &= SD_HIGH_CAPACITY) */
+    {
+      hsd->CardType = HIGH_CAPACITY_SD_CARD;
+    }
+    
+  } /* else MMC Card */
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Turns the SDMMC output signals off.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  
+  /* Set Power State to OFF */
+  SDMMC_PowerState_OFF(hsd->Instance);
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Returns the current card's status.
+  * @param  hsd: SD handle
+  * @param  pCardStatus: pointer to the buffer that will contain the SD card 
+  *         status (Card Status register)  
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus)
+{
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  
+  if(pCardStatus == NULL)
+  {
+    errorstate = SD_INVALID_PARAMETER;
+    
+    return errorstate;
+  }
+  
+  /* Send Status command */
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)(hsd->RCA << 16);
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SEND_STATUS;
+  sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+  sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+  sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEND_STATUS);
+  
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Get SD card status */
+  *pCardStatus = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1);
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Checks for error conditions for CMD0.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t timeout, tmp;
+  
+  timeout = SDMMC_CMD0TIMEOUT;
+  
+  tmp = __HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CMDSENT);
+    
+  while((timeout > 0) && (!tmp))
+  {
+    tmp = __HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CMDSENT);
+    timeout--;
+  }
+  
+  if(timeout == 0)
+  {
+    errorstate = SD_CMD_RSP_TIMEOUT;
+    return errorstate;
+  }
+  
+  /* Clear all the static flags */
+  __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Checks for error conditions for R7 response.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_ERROR;
+  uint32_t timeout = SDMMC_CMD0TIMEOUT, tmp;
+  
+  tmp = __HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT); 
+  
+  while((!tmp) && (timeout > 0))
+  {
+    tmp = __HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT);
+    timeout--;
+  }
+  
+  tmp = __HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CTIMEOUT); 
+  
+  if((timeout == 0) || tmp)
+  {
+    /* Card is not V2.0 compliant or card does not support the set voltage range */
+    errorstate = SD_CMD_RSP_TIMEOUT;
+    
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_CTIMEOUT);
+    
+    return errorstate;
+  }
+  
+  if(__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CMDREND))
+  {
+    /* Card is SD V2.0 compliant */
+    errorstate = SD_OK;
+    
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_CMDREND);
+    
+    return errorstate;
+  }
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Checks for error conditions for R1 response.
+  * @param  hsd: SD handle
+  * @param  SD_CMD: The sent command index  
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t response_r1;
+  
+  while(!__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT))
+  {
+  }
+  
+  if(__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CTIMEOUT))
+  {
+    errorstate = SD_CMD_RSP_TIMEOUT;
+    
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_CTIMEOUT);
+    
+    return errorstate;
+  }
+  else if(__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CCRCFAIL))
+  {
+    errorstate = SD_CMD_CRC_FAIL;
+    
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_CCRCFAIL);
+    
+    return errorstate;
+  }
+  
+  /* Check response received is of desired command */
+  if(SDMMC_GetCommandResponse(hsd->Instance) != SD_CMD)
+  {
+    errorstate = SD_ILLEGAL_CMD;
+    
+    return errorstate;
+  }
+  
+  /* Clear all the static flags */
+  __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+  
+  /* We have received response, retrieve it for analysis  */
+  response_r1 = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1);
+  
+  if((response_r1 & SD_OCR_ERRORBITS) == SD_ALLZERO)
+  {
+    return errorstate;
+  }
+  
+  if((response_r1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE)
+  {
+    return(SD_ADDR_OUT_OF_RANGE);
+  }
+  
+  if((response_r1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED)
+  {
+    return(SD_ADDR_MISALIGNED);
+  }
+  
+  if((response_r1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR)
+  {
+    return(SD_BLOCK_LEN_ERR);
+  }
+  
+  if((response_r1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR)
+  {
+    return(SD_ERASE_SEQ_ERR);
+  }
+  
+  if((response_r1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM)
+  {
+    return(SD_BAD_ERASE_PARAM);
+  }
+  
+  if((response_r1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION)
+  {
+    return(SD_WRITE_PROT_VIOLATION);
+  }
+  
+  if((response_r1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED)
+  {
+    return(SD_LOCK_UNLOCK_FAILED);
+  }
+  
+  if((response_r1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED)
+  {
+    return(SD_COM_CRC_FAILED);
+  }
+  
+  if((response_r1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD)
+  {
+    return(SD_ILLEGAL_CMD);
+  }
+  
+  if((response_r1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED)
+  {
+    return(SD_CARD_ECC_FAILED);
+  }
+  
+  if((response_r1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR)
+  {
+    return(SD_CC_ERROR);
+  }
+  
+  if((response_r1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR)
+  {
+    return(SD_GENERAL_UNKNOWN_ERROR);
+  }
+  
+  if((response_r1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN)
+  {
+    return(SD_STREAM_READ_UNDERRUN);
+  }
+  
+  if((response_r1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN)
+  {
+    return(SD_STREAM_WRITE_OVERRUN);
+  }
+  
+  if((response_r1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE)
+  {
+    return(SD_CID_CSD_OVERWRITE);
+  }
+  
+  if((response_r1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP)
+  {
+    return(SD_WP_ERASE_SKIP);
+  }
+  
+  if((response_r1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED)
+  {
+    return(SD_CARD_ECC_DISABLED);
+  }
+  
+  if((response_r1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET)
+  {
+    return(SD_ERASE_RESET);
+  }
+  
+  if((response_r1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR)
+  {
+    return(SD_AKE_SEQ_ERROR);
+  }
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Checks for error conditions for R3 (OCR) response.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  
+  while (!__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT))
+  {
+  }
+  
+  if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CTIMEOUT))
+  {
+    errorstate = SD_CMD_RSP_TIMEOUT;
+    
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_CTIMEOUT);
+    
+    return errorstate;
+  }
+  
+  /* Clear all the static flags */
+  __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Checks for error conditions for R2 (CID or CSD) response.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  
+  while (!__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT))
+  {
+  }
+    
+  if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CTIMEOUT))
+  {
+    errorstate = SD_CMD_RSP_TIMEOUT;
+    
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_CTIMEOUT);
+    
+    return errorstate;
+  }
+  else if (__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CCRCFAIL))
+  {
+    errorstate = SD_CMD_CRC_FAIL;
+    
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_CCRCFAIL);
+    
+    return errorstate;
+  }
+  else
+  {
+    /* No error flag set */
+  }  
+  
+  /* Clear all the static flags */
+  __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Checks for error conditions for R6 (RCA) response.
+  * @param  hsd: SD handle
+  * @param  SD_CMD: The sent command index
+  * @param  pRCA: Pointer to the variable that will contain the SD card relative 
+  *         address RCA   
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA)
+{
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t response_r1;
+  
+  while(!__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT))
+  {
+  }
+  
+  if(__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CTIMEOUT))
+  {
+    errorstate = SD_CMD_RSP_TIMEOUT;
+    
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_CTIMEOUT);
+    
+    return errorstate;
+  }
+  else if(__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CCRCFAIL))
+  {
+    errorstate = SD_CMD_CRC_FAIL;
+    
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_CCRCFAIL);
+    
+    return errorstate;
+  }
+  else
+  {
+    /* No error flag set */
+  }  
+  
+  /* Check response received is of desired command */
+  if(SDMMC_GetCommandResponse(hsd->Instance) != SD_CMD)
+  {
+    errorstate = SD_ILLEGAL_CMD;
+    
+    return errorstate;
+  }
+  
+  /* Clear all the static flags */
+  __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+  
+  /* We have received response, retrieve it.  */
+  response_r1 = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1);
+  
+  if((response_r1 & (SD_R6_GENERAL_UNKNOWN_ERROR | SD_R6_ILLEGAL_CMD | SD_R6_COM_CRC_FAILED)) == SD_ALLZERO)
+  {
+    *pRCA = (uint16_t) (response_r1 >> 16);
+    
+    return errorstate;
+  }
+  
+  if((response_r1 & SD_R6_GENERAL_UNKNOWN_ERROR) == SD_R6_GENERAL_UNKNOWN_ERROR)
+  {
+    return(SD_GENERAL_UNKNOWN_ERROR);
+  }
+  
+  if((response_r1 & SD_R6_ILLEGAL_CMD) == SD_R6_ILLEGAL_CMD)
+  {
+    return(SD_ILLEGAL_CMD);
+  }
+  
+  if((response_r1 & SD_R6_COM_CRC_FAILED) == SD_R6_COM_CRC_FAILED)
+  {
+    return(SD_COM_CRC_FAILED);
+  }
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Enables the SDMMC wide bus mode.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd)
+{
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  
+  uint32_t scr[2] = {0, 0};
+  
+  if((SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+  {
+    errorstate = SD_LOCK_UNLOCK_FAILED;
+    
+    return errorstate;
+  }
+  
+  /* Get SCR Register */
+  errorstate = SD_FindSCR(hsd, scr);
+  
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* If requested card supports wide bus operation */
+  if((scr[1] & SD_WIDE_BUS_SUPPORT) != SD_ALLZERO)
+  {
+    /* Send CMD55 APP_CMD with argument as card's RCA.*/
+    sdmmc_cmdinitstructure.Argument         = (uint32_t)(hsd->RCA << 16);
+    sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_APP_CMD;
+    sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+    sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+    sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+    SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+    
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+    
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+    
+    /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */
+    sdmmc_cmdinitstructure.Argument         = 2;
+    sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_APP_SD_SET_BUSWIDTH;
+    SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+    
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH);
+    
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+    
+    return errorstate;
+  }
+  else
+  {
+    errorstate = SD_REQUEST_NOT_APPLICABLE;
+    
+    return errorstate;
+  }
+}   
+
+/**
+  * @brief  Disables the SDMMC wide bus mode.
+  * @param  hsd: SD handle
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd)
+{
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  
+  uint32_t scr[2] = {0, 0};
+  
+  if((SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
+  {
+    errorstate = SD_LOCK_UNLOCK_FAILED;
+    
+    return errorstate;
+  }
+  
+  /* Get SCR Register */
+  errorstate = SD_FindSCR(hsd, scr);
+  
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* If requested card supports 1 bit mode operation */
+  if((scr[1] & SD_SINGLE_BUS_SUPPORT) != SD_ALLZERO)
+  {
+    /* Send CMD55 APP_CMD with argument as card's RCA */
+    sdmmc_cmdinitstructure.Argument         = (uint32_t)(hsd->RCA << 16);
+    sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_APP_CMD;
+    sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+    sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+    sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+    SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+    
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+    
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+    
+    /* Send ACMD6 APP_CMD with argument as 0 for single bus mode */
+    sdmmc_cmdinitstructure.Argument         = 0;
+    sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_APP_SD_SET_BUSWIDTH;
+    SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+    
+    /* Check for error conditions */
+    errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH);
+    
+    if(errorstate != SD_OK)
+    {
+      return errorstate;
+    }
+    
+    return errorstate;
+  }
+  else
+  {
+    errorstate = SD_REQUEST_NOT_APPLICABLE;
+    
+    return errorstate;
+  }
+}
+  
+  
+/**
+  * @brief  Finds the SD card SCR register value.
+  * @param  hsd: SD handle
+  * @param  pSCR: pointer to the buffer that will contain the SCR value  
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR)
+{
+  SDMMC_CmdInitTypeDef  sdmmc_cmdinitstructure;
+  SDMMC_DataInitTypeDef sdmmc_datainitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  uint32_t index = 0;
+  uint32_t tempscr[2] = {0, 0};
+  
+  /* Set Block Size To 8 Bytes */
+  /* Send CMD55 APP_CMD with argument as card's RCA */
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)8;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SET_BLOCKLEN;
+  sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+  sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+  sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
+  
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  /* Send CMD55 APP_CMD with argument as card's RCA */
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)((hsd->RCA) << 16);
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_APP_CMD;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
+  
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  sdmmc_datainitstructure.DataTimeOut   = SD_DATATIMEOUT;
+  sdmmc_datainitstructure.DataLength    = 8;
+  sdmmc_datainitstructure.DataBlockSize = SDMMC_DATABLOCK_SIZE_8B;
+  sdmmc_datainitstructure.TransferDir   = SDMMC_TRANSFER_DIR_TO_SDMMC;
+  sdmmc_datainitstructure.TransferMode  = SDMMC_TRANSFER_MODE_BLOCK;
+  sdmmc_datainitstructure.DPSM          = SDMMC_DPSM_ENABLE;
+  SDMMC_DataConfig(hsd->Instance, &sdmmc_datainitstructure);
+  
+  /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */
+  sdmmc_cmdinitstructure.Argument         = 0;
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SD_APP_SEND_SCR;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  /* Check for error conditions */
+  errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_SEND_SCR);
+  
+  if(errorstate != SD_OK)
+  {
+    return errorstate;
+  }
+  
+  while(!__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR | SDMMC_FLAG_DCRCFAIL | SDMMC_FLAG_DTIMEOUT | SDMMC_FLAG_DBCKEND))
+  {
+    if(__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXDAVL))
+    {
+      *(tempscr + index) = SDMMC_ReadFIFO(hsd->Instance);
+      index++;
+    }
+  }
+  
+  if(__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_DTIMEOUT))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_DTIMEOUT);
+    
+    errorstate = SD_DATA_TIMEOUT;
+    
+    return errorstate;
+  }
+  else if(__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_DCRCFAIL))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_DCRCFAIL);
+    
+    errorstate = SD_DATA_CRC_FAIL;
+    
+    return errorstate;
+  }
+  else if(__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_RXOVERR))
+  {
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_RXOVERR);
+    
+    errorstate = SD_RX_OVERRUN;
+    
+    return errorstate;
+  }
+  else
+  {
+    /* No error flag set */
+  }
+  
+  /* Clear all the static flags */
+  __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+  
+  *(pSCR + 1) = ((tempscr[0] & SD_0TO7BITS) << 24)  | ((tempscr[0] & SD_8TO15BITS) << 8) |\
+    ((tempscr[0] & SD_16TO23BITS) >> 8) | ((tempscr[0] & SD_24TO31BITS) >> 24);
+  
+  *(pSCR) = ((tempscr[1] & SD_0TO7BITS) << 24)  | ((tempscr[1] & SD_8TO15BITS) << 8) |\
+    ((tempscr[1] & SD_16TO23BITS) >> 8) | ((tempscr[1] & SD_24TO31BITS) >> 24);
+  
+  return errorstate;
+}
+
+/**
+  * @brief  Checks if the SD card is in programming state.
+  * @param  hsd: SD handle
+  * @param  pStatus: pointer to the variable that will contain the SD card state  
+  * @retval SD Card error state
+  */
+static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus)
+{
+  SDMMC_CmdInitTypeDef sdmmc_cmdinitstructure;
+  HAL_SD_ErrorTypedef errorstate = SD_OK;
+  __IO uint32_t responseR1 = 0;
+  
+  sdmmc_cmdinitstructure.Argument         = (uint32_t)(hsd->RCA << 16);
+  sdmmc_cmdinitstructure.CmdIndex         = SD_CMD_SEND_STATUS;
+  sdmmc_cmdinitstructure.Response         = SDMMC_RESPONSE_SHORT;
+  sdmmc_cmdinitstructure.WaitForInterrupt = SDMMC_WAIT_NO;
+  sdmmc_cmdinitstructure.CPSM             = SDMMC_CPSM_ENABLE;
+  SDMMC_SendCommand(hsd->Instance, &sdmmc_cmdinitstructure);
+  
+  while(!__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CCRCFAIL | SDMMC_FLAG_CMDREND | SDMMC_FLAG_CTIMEOUT))
+  {
+  }
+  
+  if(__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CTIMEOUT))
+  {
+    errorstate = SD_CMD_RSP_TIMEOUT;
+    
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_CTIMEOUT);
+    
+    return errorstate;
+  }
+  else if(__HAL_SD_SDMMC_GET_FLAG(hsd, SDMMC_FLAG_CCRCFAIL))
+  {
+    errorstate = SD_CMD_CRC_FAIL;
+    
+    __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_FLAG_CCRCFAIL);
+    
+    return errorstate;
+  }
+  else
+  {
+    /* No error flag set */
+  }
+  
+  /* Check response received is of desired command */
+  if((uint32_t)SDMMC_GetCommandResponse(hsd->Instance) != SD_CMD_SEND_STATUS)
+  {
+    errorstate = SD_ILLEGAL_CMD;
+    
+    return errorstate;
+  }
+  
+  /* Clear all the static flags */
+  __HAL_SD_SDMMC_CLEAR_FLAG(hsd, SDMMC_STATIC_FLAGS);
+  
+  
+  /* We have received response, retrieve it for analysis */
+  responseR1 = SDMMC_GetResponse(hsd->Instance, SDMMC_RESP1);
+  
+  /* Find out card status */
+  *pStatus = (uint8_t)((responseR1 >> 9) & 0x0000000F);
+  
+  if((responseR1 & SD_OCR_ERRORBITS) == SD_ALLZERO)
+  {
+    return errorstate;
+  }
+  
+  if((responseR1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE)
+  {
+    return(SD_ADDR_OUT_OF_RANGE);
+  }
+  
+  if((responseR1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED)
+  {
+    return(SD_ADDR_MISALIGNED);
+  }
+  
+  if((responseR1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR)
+  {
+    return(SD_BLOCK_LEN_ERR);
+  }
+  
+  if((responseR1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR)
+  {
+    return(SD_ERASE_SEQ_ERR);
+  }
+  
+  if((responseR1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM)
+  {
+    return(SD_BAD_ERASE_PARAM);
+  }
+  
+  if((responseR1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION)
+  {
+    return(SD_WRITE_PROT_VIOLATION);
+  }
+  
+  if((responseR1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED)
+  {
+    return(SD_LOCK_UNLOCK_FAILED);
+  }
+  
+  if((responseR1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED)
+  {
+    return(SD_COM_CRC_FAILED);
+  }
+  
+  if((responseR1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD)
+  {
+    return(SD_ILLEGAL_CMD);
+  }
+  
+  if((responseR1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED)
+  {
+    return(SD_CARD_ECC_FAILED);
+  }
+  
+  if((responseR1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR)
+  {
+    return(SD_CC_ERROR);
+  }
+  
+  if((responseR1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR)
+  {
+    return(SD_GENERAL_UNKNOWN_ERROR);
+  }
+  
+  if((responseR1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN)
+  {
+    return(SD_STREAM_READ_UNDERRUN);
+  }
+  
+  if((responseR1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN)
+  {
+    return(SD_STREAM_WRITE_OVERRUN);
+  }
+  
+  if((responseR1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE)
+  {
+    return(SD_CID_CSD_OVERWRITE);
+  }
+  
+  if((responseR1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP)
+  {
+    return(SD_WP_ERASE_SKIP);
+  }
+  
+  if((responseR1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED)
+  {
+    return(SD_CARD_ECC_DISABLED);
+  }
+  
+  if((responseR1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET)
+  {
+    return(SD_ERASE_RESET);
+  }
+  
+  if((responseR1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR)
+  {
+    return(SD_AKE_SEQ_ERROR);
+  }
+  
+  return errorstate;
+}   
+
+/**
+  * @}
+  */
+
+#endif /* HAL_SD_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_sd.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,774 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_sd.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of SD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_SD_H
+#define __STM32F7xx_HAL_SD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_sdmmc.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SD SD
+  * @brief SD HAL module driver
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup SD_Exported_Types SD Exported Types
+  * @{
+  */
+
+/** @defgroup SD_Exported_Types_Group1 SD Handle Structure definition   
+  * @{
+  */
+#define SD_InitTypeDef      SDMMC_InitTypeDef 
+#define SD_TypeDef          SDMMC_TypeDef
+
+typedef struct
+{
+  SD_TypeDef                   *Instance;        /*!< SDMMC register base address                     */
+  
+  SD_InitTypeDef               Init;             /*!< SD required parameters                         */
+  
+  HAL_LockTypeDef              Lock;             /*!< SD locking object                              */
+  
+  uint32_t                     CardType;         /*!< SD card type                                   */
+  
+  uint32_t                     RCA;              /*!< SD relative card address                       */
+  
+  uint32_t                     CSD[4];           /*!< SD card specific data table                    */
+  
+  uint32_t                     CID[4];           /*!< SD card identification number table            */
+  
+  __IO uint32_t                SdTransferCplt;   /*!< SD transfer complete flag in non blocking mode */
+  
+  __IO uint32_t                SdTransferErr;    /*!< SD transfer error flag in non blocking mode    */
+  
+  __IO uint32_t                DmaTransferCplt;  /*!< SD DMA transfer complete flag                  */
+  
+  __IO uint32_t                SdOperation;      /*!< SD transfer operation (read/write)             */
+  
+  DMA_HandleTypeDef            *hdmarx;          /*!< SD Rx DMA handle parameters                    */
+  
+  DMA_HandleTypeDef            *hdmatx;          /*!< SD Tx DMA handle parameters                    */
+  
+}SD_HandleTypeDef;
+/** 
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group2 Card Specific Data: CSD Register 
+  * @{
+  */ 
+typedef struct
+{
+  __IO uint8_t  CSDStruct;            /*!< CSD structure                         */
+  __IO uint8_t  SysSpecVersion;       /*!< System specification version          */
+  __IO uint8_t  Reserved1;            /*!< Reserved                              */
+  __IO uint8_t  TAAC;                 /*!< Data read access time 1               */
+  __IO uint8_t  NSAC;                 /*!< Data read access time 2 in CLK cycles */
+  __IO uint8_t  MaxBusClkFrec;        /*!< Max. bus clock frequency              */
+  __IO uint16_t CardComdClasses;      /*!< Card command classes                  */
+  __IO uint8_t  RdBlockLen;           /*!< Max. read data block length           */
+  __IO uint8_t  PartBlockRead;        /*!< Partial blocks for read allowed       */
+  __IO uint8_t  WrBlockMisalign;      /*!< Write block misalignment              */
+  __IO uint8_t  RdBlockMisalign;      /*!< Read block misalignment               */
+  __IO uint8_t  DSRImpl;              /*!< DSR implemented                       */
+  __IO uint8_t  Reserved2;            /*!< Reserved                              */
+  __IO uint32_t DeviceSize;           /*!< Device Size                           */
+  __IO uint8_t  MaxRdCurrentVDDMin;   /*!< Max. read current @ VDD min           */
+  __IO uint8_t  MaxRdCurrentVDDMax;   /*!< Max. read current @ VDD max           */
+  __IO uint8_t  MaxWrCurrentVDDMin;   /*!< Max. write current @ VDD min          */
+  __IO uint8_t  MaxWrCurrentVDDMax;   /*!< Max. write current @ VDD max          */
+  __IO uint8_t  DeviceSizeMul;        /*!< Device size multiplier                */
+  __IO uint8_t  EraseGrSize;          /*!< Erase group size                      */
+  __IO uint8_t  EraseGrMul;           /*!< Erase group size multiplier           */
+  __IO uint8_t  WrProtectGrSize;      /*!< Write protect group size              */
+  __IO uint8_t  WrProtectGrEnable;    /*!< Write protect group enable            */
+  __IO uint8_t  ManDeflECC;           /*!< Manufacturer default ECC              */
+  __IO uint8_t  WrSpeedFact;          /*!< Write speed factor                    */
+  __IO uint8_t  MaxWrBlockLen;        /*!< Max. write data block length          */
+  __IO uint8_t  WriteBlockPaPartial;  /*!< Partial blocks for write allowed      */
+  __IO uint8_t  Reserved3;            /*!< Reserved                              */
+  __IO uint8_t  ContentProtectAppli;  /*!< Content protection application        */
+  __IO uint8_t  FileFormatGrouop;     /*!< File format group                     */
+  __IO uint8_t  CopyFlag;             /*!< Copy flag (OTP)                       */
+  __IO uint8_t  PermWrProtect;        /*!< Permanent write protection            */
+  __IO uint8_t  TempWrProtect;        /*!< Temporary write protection            */
+  __IO uint8_t  FileFormat;           /*!< File format                           */
+  __IO uint8_t  ECC;                  /*!< ECC code                              */
+  __IO uint8_t  CSD_CRC;              /*!< CSD CRC                               */
+  __IO uint8_t  Reserved4;            /*!< Always 1                              */
+
+}HAL_SD_CSDTypedef;
+/** 
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group3 Card Identification Data: CID Register
+  * @{
+  */
+typedef struct
+{
+  __IO uint8_t  ManufacturerID;  /*!< Manufacturer ID       */
+  __IO uint16_t OEM_AppliID;     /*!< OEM/Application ID    */
+  __IO uint32_t ProdName1;       /*!< Product Name part1    */
+  __IO uint8_t  ProdName2;       /*!< Product Name part2    */
+  __IO uint8_t  ProdRev;         /*!< Product Revision      */
+  __IO uint32_t ProdSN;          /*!< Product Serial Number */
+  __IO uint8_t  Reserved1;       /*!< Reserved1             */
+  __IO uint16_t ManufactDate;    /*!< Manufacturing Date    */
+  __IO uint8_t  CID_CRC;         /*!< CID CRC               */
+  __IO uint8_t  Reserved2;       /*!< Always 1              */
+
+}HAL_SD_CIDTypedef;
+/** 
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group4 SD Card Status returned by ACMD13 
+  * @{
+  */
+typedef struct
+{
+  __IO uint8_t  DAT_BUS_WIDTH;           /*!< Shows the currently defined data bus width                 */
+  __IO uint8_t  SECURED_MODE;            /*!< Card is in secured mode of operation                       */
+  __IO uint16_t SD_CARD_TYPE;            /*!< Carries information about card type                        */
+  __IO uint32_t SIZE_OF_PROTECTED_AREA;  /*!< Carries information about the capacity of protected area   */
+  __IO uint8_t  SPEED_CLASS;             /*!< Carries information about the speed class of the card      */
+  __IO uint8_t  PERFORMANCE_MOVE;        /*!< Carries information about the card's performance move      */
+  __IO uint8_t  AU_SIZE;                 /*!< Carries information about the card's allocation unit size  */
+  __IO uint16_t ERASE_SIZE;              /*!< Determines the number of AUs to be erased in one operation */
+  __IO uint8_t  ERASE_TIMEOUT;           /*!< Determines the timeout for any number of AU erase          */
+  __IO uint8_t  ERASE_OFFSET;            /*!< Carries information about the erase offset                 */
+
+}HAL_SD_CardStatusTypedef;
+/** 
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group5 SD Card information structure 
+  * @{
+  */
+typedef struct
+{
+  HAL_SD_CSDTypedef   SD_csd;         /*!< SD card specific data register         */
+  HAL_SD_CIDTypedef   SD_cid;         /*!< SD card identification number register */
+  uint64_t            CardCapacity;   /*!< Card capacity                          */
+  uint32_t            CardBlockSize;  /*!< Card block size                        */
+  uint16_t            RCA;            /*!< SD relative card address               */
+  uint8_t             CardType;       /*!< SD card type                           */
+
+}HAL_SD_CardInfoTypedef;
+/** 
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group6 SD Error status enumeration Structure definition 
+  * @{
+  */
+typedef enum
+{
+/** 
+  * @brief  SD specific error defines  
+  */   
+  SD_CMD_CRC_FAIL                    = (1),   /*!< Command response received (but CRC check failed)              */
+  SD_DATA_CRC_FAIL                   = (2),   /*!< Data block sent/received (CRC check failed)                   */
+  SD_CMD_RSP_TIMEOUT                 = (3),   /*!< Command response timeout                                      */
+  SD_DATA_TIMEOUT                    = (4),   /*!< Data timeout                                                  */
+  SD_TX_UNDERRUN                     = (5),   /*!< Transmit FIFO underrun                                        */
+  SD_RX_OVERRUN                      = (6),   /*!< Receive FIFO overrun                                          */
+  SD_START_BIT_ERR                   = (7),   /*!< Start bit not detected on all data signals in wide bus mode   */
+  SD_CMD_OUT_OF_RANGE                = (8),   /*!< Command's argument was out of range.                          */
+  SD_ADDR_MISALIGNED                 = (9),   /*!< Misaligned address                                            */
+  SD_BLOCK_LEN_ERR                   = (10),  /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
+  SD_ERASE_SEQ_ERR                   = (11),  /*!< An error in the sequence of erase command occurs.            */
+  SD_BAD_ERASE_PARAM                 = (12),  /*!< An invalid selection for erase groups                        */
+  SD_WRITE_PROT_VIOLATION            = (13),  /*!< Attempt to program a write protect block                     */
+  SD_LOCK_UNLOCK_FAILED              = (14),  /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
+  SD_COM_CRC_FAILED                  = (15),  /*!< CRC check of the previous command failed                     */
+  SD_ILLEGAL_CMD                     = (16),  /*!< Command is not legal for the card state                      */
+  SD_CARD_ECC_FAILED                 = (17),  /*!< Card internal ECC was applied but failed to correct the data */
+  SD_CC_ERROR                        = (18),  /*!< Internal card controller error                               */
+  SD_GENERAL_UNKNOWN_ERROR           = (19),  /*!< General or unknown error                                     */
+  SD_STREAM_READ_UNDERRUN            = (20),  /*!< The card could not sustain data transfer in stream read operation. */
+  SD_STREAM_WRITE_OVERRUN            = (21),  /*!< The card could not sustain data programming in stream mode   */
+  SD_CID_CSD_OVERWRITE               = (22),  /*!< CID/CSD overwrite error                                      */
+  SD_WP_ERASE_SKIP                   = (23),  /*!< Only partial address space was erased                        */
+  SD_CARD_ECC_DISABLED               = (24),  /*!< Command has been executed without using internal ECC         */
+  SD_ERASE_RESET                     = (25),  /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */
+  SD_AKE_SEQ_ERROR                   = (26),  /*!< Error in sequence of authentication.                         */
+  SD_INVALID_VOLTRANGE               = (27),
+  SD_ADDR_OUT_OF_RANGE               = (28),
+  SD_SWITCH_ERROR                    = (29),
+  SD_SDMMC_DISABLED                  = (30),
+  SD_SDMMC_FUNCTION_BUSY             = (31),
+  SD_SDMMC_FUNCTION_FAILED           = (32),
+  SD_SDMMC_UNKNOWN_FUNCTION          = (33),
+
+/** 
+  * @brief  Standard error defines   
+  */ 
+  SD_INTERNAL_ERROR                  = (34),
+  SD_NOT_CONFIGURED                  = (35),
+  SD_REQUEST_PENDING                 = (36),
+  SD_REQUEST_NOT_APPLICABLE          = (37),
+  SD_INVALID_PARAMETER               = (38),
+  SD_UNSUPPORTED_FEATURE             = (39),
+  SD_UNSUPPORTED_HW                  = (40),
+  SD_ERROR                           = (41),
+  SD_OK                              = (0) 
+
+}HAL_SD_ErrorTypedef;
+/** 
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group7 SD Transfer state enumeration structure
+  * @{
+  */   
+typedef enum
+{
+  SD_TRANSFER_OK    = 0,  /*!< Transfer success      */
+  SD_TRANSFER_BUSY  = 1,  /*!< Transfer is occurring */
+  SD_TRANSFER_ERROR = 2   /*!< Transfer failed       */
+
+}HAL_SD_TransferStateTypedef;
+/** 
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group8 SD Card State enumeration structure
+  * @{
+  */   
+typedef enum
+{
+  SD_CARD_READY                  = ((uint32_t)0x00000001),  /*!< Card state is ready                     */
+  SD_CARD_IDENTIFICATION         = ((uint32_t)0x00000002),  /*!< Card is in identification state         */
+  SD_CARD_STANDBY                = ((uint32_t)0x00000003),  /*!< Card is in standby state                */
+  SD_CARD_TRANSFER               = ((uint32_t)0x00000004),  /*!< Card is in transfer state               */  
+  SD_CARD_SENDING                = ((uint32_t)0x00000005),  /*!< Card is sending an operation            */
+  SD_CARD_RECEIVING              = ((uint32_t)0x00000006),  /*!< Card is receiving operation information */
+  SD_CARD_PROGRAMMING            = ((uint32_t)0x00000007),  /*!< Card is in programming state            */
+  SD_CARD_DISCONNECTED           = ((uint32_t)0x00000008),  /*!< Card is disconnected                    */
+  SD_CARD_ERROR                  = ((uint32_t)0x000000FF)   /*!< Card is in error state                  */
+
+}HAL_SD_CardStateTypedef;
+/** 
+  * @}
+  */
+
+/** @defgroup SD_Exported_Types_Group9 SD Operation enumeration structure
+  * @{
+  */   
+typedef enum
+{
+  SD_READ_SINGLE_BLOCK    = 0,  /*!< Read single block operation      */
+  SD_READ_MULTIPLE_BLOCK  = 1,  /*!< Read multiple blocks operation   */
+  SD_WRITE_SINGLE_BLOCK   = 2,  /*!< Write single block operation     */
+  SD_WRITE_MULTIPLE_BLOCK = 3   /*!< Write multiple blocks operation  */
+
+}HAL_SD_OperationTypedef;
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SD_Exported_Constants SD Exported Constants
+  * @{
+  */
+
+/** 
+  * @brief SD Commands Index 
+  */
+#define SD_CMD_GO_IDLE_STATE                       ((uint8_t)0)   /*!< Resets the SD memory card.                                                               */
+#define SD_CMD_SEND_OP_COND                        ((uint8_t)1)   /*!< Sends host capacity support information and activates the card's initialization process. */
+#define SD_CMD_ALL_SEND_CID                        ((uint8_t)2)   /*!< Asks any card connected to the host to send the CID numbers on the CMD line.             */
+#define SD_CMD_SET_REL_ADDR                        ((uint8_t)3)   /*!< Asks the card to publish a new relative address (RCA).                                   */
+#define SD_CMD_SET_DSR                             ((uint8_t)4)   /*!< Programs the DSR of all cards.                                                           */
+#define SD_CMD_SDMMC_SEN_OP_COND                   ((uint8_t)5)   /*!< Sends host capacity support information (HCS) and asks the accessed card to send its 
+                                                                       operating condition register (OCR) content in the response on the CMD line.              */
+#define SD_CMD_HS_SWITCH                           ((uint8_t)6)   /*!< Checks switchable function (mode 0) and switch card function (mode 1).                   */
+#define SD_CMD_SEL_DESEL_CARD                      ((uint8_t)7)   /*!< Selects the card by its own relative address and gets deselected by any other address    */
+#define SD_CMD_HS_SEND_EXT_CSD                     ((uint8_t)8)   /*!< Sends SD Memory Card interface condition, which includes host supply voltage information 
+                                                                       and asks the card whether card supports voltage.                                         */
+#define SD_CMD_SEND_CSD                            ((uint8_t)9)   /*!< Addressed card sends its card specific data (CSD) on the CMD line.                       */
+#define SD_CMD_SEND_CID                            ((uint8_t)10)  /*!< Addressed card sends its card identification (CID) on the CMD line.                      */
+#define SD_CMD_READ_DAT_UNTIL_STOP                 ((uint8_t)11)  /*!< SD card doesn't support it.                                                              */
+#define SD_CMD_STOP_TRANSMISSION                   ((uint8_t)12)  /*!< Forces the card to stop transmission.                                                    */
+#define SD_CMD_SEND_STATUS                         ((uint8_t)13)  /*!< Addressed card sends its status register.                                                */
+#define SD_CMD_HS_BUSTEST_READ                     ((uint8_t)14) 
+#define SD_CMD_GO_INACTIVE_STATE                   ((uint8_t)15)  /*!< Sends an addressed card into the inactive state.                                         */
+#define SD_CMD_SET_BLOCKLEN                        ((uint8_t)16)  /*!< Sets the block length (in bytes for SDSC) for all following block commands 
+                                                                       (read, write, lock). Default block length is fixed to 512 Bytes. Not effective 
+                                                                       for SDHS and SDXC.                                                                       */
+#define SD_CMD_READ_SINGLE_BLOCK                   ((uint8_t)17)  /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of 
+                                                                       fixed 512 bytes in case of SDHC and SDXC.                                                */
+#define SD_CMD_READ_MULT_BLOCK                     ((uint8_t)18)  /*!< Continuously transfers data blocks from card to host until interrupted by 
+                                                                       STOP_TRANSMISSION command.                                                               */
+#define SD_CMD_HS_BUSTEST_WRITE                    ((uint8_t)19)  /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104.                                    */
+#define SD_CMD_WRITE_DAT_UNTIL_STOP                ((uint8_t)20)  /*!< Speed class control command.                                                             */
+#define SD_CMD_SET_BLOCK_COUNT                     ((uint8_t)23)  /*!< Specify block count for CMD18 and CMD25.                                                 */
+#define SD_CMD_WRITE_SINGLE_BLOCK                  ((uint8_t)24)  /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of 
+                                                                       fixed 512 bytes in case of SDHC and SDXC.                                                */
+#define SD_CMD_WRITE_MULT_BLOCK                    ((uint8_t)25)  /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows.                    */
+#define SD_CMD_PROG_CID                            ((uint8_t)26)  /*!< Reserved for manufacturers.                                                              */
+#define SD_CMD_PROG_CSD                            ((uint8_t)27)  /*!< Programming of the programmable bits of the CSD.                                         */
+#define SD_CMD_SET_WRITE_PROT                      ((uint8_t)28)  /*!< Sets the write protection bit of the addressed group.                                    */
+#define SD_CMD_CLR_WRITE_PROT                      ((uint8_t)29)  /*!< Clears the write protection bit of the addressed group.                                  */
+#define SD_CMD_SEND_WRITE_PROT                     ((uint8_t)30)  /*!< Asks the card to send the status of the write protection bits.                           */
+#define SD_CMD_SD_ERASE_GRP_START                  ((uint8_t)32)  /*!< Sets the address of the first write block to be erased. (For SD card only).              */
+#define SD_CMD_SD_ERASE_GRP_END                    ((uint8_t)33)  /*!< Sets the address of the last write block of the continuous range to be erased.           */
+#define SD_CMD_ERASE_GRP_START                     ((uint8_t)35)  /*!< Sets the address of the first write block to be erased. Reserved for each command 
+                                                                       system set by switch function command (CMD6).                                            */
+#define SD_CMD_ERASE_GRP_END                       ((uint8_t)36)  /*!< Sets the address of the last write block of the continuous range to be erased. 
+                                                                       Reserved for each command system set by switch function command (CMD6).                  */
+#define SD_CMD_ERASE                               ((uint8_t)38)  /*!< Reserved for SD security applications.                                                   */
+#define SD_CMD_FAST_IO                             ((uint8_t)39)  /*!< SD card doesn't support it (Reserved).                                                   */
+#define SD_CMD_GO_IRQ_STATE                        ((uint8_t)40)  /*!< SD card doesn't support it (Reserved).                                                   */
+#define SD_CMD_LOCK_UNLOCK                         ((uint8_t)42)  /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by 
+                                                                       the SET_BLOCK_LEN command.                                                               */
+#define SD_CMD_APP_CMD                             ((uint8_t)55)  /*!< Indicates to the card that the next command is an application specific command rather 
+                                                                       than a standard command.                                                                 */
+#define SD_CMD_GEN_CMD                             ((uint8_t)56)  /*!< Used either to transfer a data block to the card or to get a data block from the card 
+                                                                       for general purpose/application specific commands.                                       */
+#define SD_CMD_NO_CMD                              ((uint8_t)64) 
+
+/** 
+  * @brief Following commands are SD Card Specific commands.
+  *        SDMMC_APP_CMD should be sent before sending these commands. 
+  */
+#define SD_CMD_APP_SD_SET_BUSWIDTH                 ((uint8_t)6)   /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus 
+                                                                       widths are given in SCR register.                                                          */
+#define SD_CMD_SD_APP_STATUS                       ((uint8_t)13)  /*!< (ACMD13) Sends the SD status.                                                              */
+#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS        ((uint8_t)22)  /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with 
+                                                                       32bit+CRC data block.                                                                      */
+#define SD_CMD_SD_APP_OP_COND                      ((uint8_t)41)  /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to 
+                                                                       send its operating condition register (OCR) content in the response on the CMD line.       */
+#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT          ((uint8_t)42)  /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */
+#define SD_CMD_SD_APP_SEND_SCR                     ((uint8_t)51)  /*!< Reads the SD Configuration Register (SCR).                                                 */
+#define SD_CMD_SDMMC_RW_DIRECT                     ((uint8_t)52)  /*!< For SD I/O card only, reserved for security specification.                                 */
+#define SD_CMD_SDMMC_RW_EXTENDED                   ((uint8_t)53)  /*!< For SD I/O card only, reserved for security specification.                                 */
+
+/** 
+  * @brief Following commands are SD Card Specific security commands.
+  *        SD_CMD_APP_CMD should be sent before sending these commands. 
+  */
+#define SD_CMD_SD_APP_GET_MKB                      ((uint8_t)43)  /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_MID                      ((uint8_t)44)  /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RN1                  ((uint8_t)45)  /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RN2                  ((uint8_t)46)  /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RES2                 ((uint8_t)47)  /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RES1                 ((uint8_t)48)  /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK   ((uint8_t)18)  /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK  ((uint8_t)25)  /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_ERASE                 ((uint8_t)38)  /*!< For SD card only */
+#define SD_CMD_SD_APP_CHANGE_SECURE_AREA           ((uint8_t)49)  /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MKB             ((uint8_t)48)  /*!< For SD card only */
+
+/** 
+  * @brief Supported SD Memory Cards 
+  */
+#define STD_CAPACITY_SD_CARD_V1_1             ((uint32_t)0x00000000)
+#define STD_CAPACITY_SD_CARD_V2_0             ((uint32_t)0x00000001)
+#define HIGH_CAPACITY_SD_CARD                 ((uint32_t)0x00000002)
+#define MULTIMEDIA_CARD                       ((uint32_t)0x00000003)
+#define SECURE_DIGITAL_IO_CARD                ((uint32_t)0x00000004)
+#define HIGH_SPEED_MULTIMEDIA_CARD            ((uint32_t)0x00000005)
+#define SECURE_DIGITAL_IO_COMBO_CARD          ((uint32_t)0x00000006)
+#define HIGH_CAPACITY_MMC_CARD                ((uint32_t)0x00000007)
+/**
+  * @}
+  */
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SD_Exported_macros SD Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+ 
+/**
+  * @brief  Enable the SD device.
+  * @retval None
+  */ 
+#define __HAL_SD_SDMMC_ENABLE(__HANDLE__) __SDMMC_ENABLE((__HANDLE__)->Instance)
+
+/**
+  * @brief  Disable the SD device.
+  * @retval None
+  */
+#define __HAL_SD_SDMMC_DISABLE(__HANDLE__) __SDMMC_DISABLE((__HANDLE__)->Instance)
+
+/**
+  * @brief  Enable the SDMMC DMA transfer.
+  * @retval None
+  */ 
+#define __HAL_SD_SDMMC_DMA_ENABLE(__HANDLE__) __SDMMC_DMA_ENABLE((__HANDLE__)->Instance)
+
+/**
+  * @brief  Disable the SDMMC DMA transfer.
+  * @retval None
+  */
+#define __HAL_SD_SDMMC_DMA_DISABLE(__HANDLE__)  __SDMMC_DMA_DISABLE((__HANDLE__)->Instance)
+ 
+/**
+  * @brief  Enable the SD device interrupt.
+  * @param  __HANDLE__: SD Handle  
+  * @param  __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.
+  *         This parameter can be one or a combination of the following values:
+  *            @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDMMC_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDMMC_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDMMC_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDMMC_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDMMC_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDMMC_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDMMC_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDMMC_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDMMC_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDMMC_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDMMC_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDMMC_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDMMC_IT_SDIOIT:   SD I/O interrupt received interrupt
+  * @retval None
+  */
+#define __HAL_SD_SDMMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @brief  Disable the SD device interrupt.
+  * @param  __HANDLE__: SD Handle   
+  * @param  __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDMMC_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDMMC_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDMMC_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDMMC_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDMMC_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDMMC_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDMMC_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDMMC_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDMMC_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDMMC_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDMMC_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDMMC_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDMMC_IT_SDIOIT:   SD I/O interrupt received interrupt   
+  * @retval None
+  */
+#define __HAL_SD_SDMMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified SD flag is set or not. 
+  * @param  __HANDLE__: SD Handle   
+  * @param  __FLAG__: specifies the flag to check. 
+  *          This parameter can be one of the following values:
+  *            @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *            @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *            @arg SDMMC_FLAG_CTIMEOUT: Command response timeout
+  *            @arg SDMMC_FLAG_DTIMEOUT: Data timeout
+  *            @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *            @arg SDMMC_FLAG_RXOVERR:  Received FIFO overrun error
+  *            @arg SDMMC_FLAG_CMDREND:  Command response received (CRC check passed)
+  *            @arg SDMMC_FLAG_CMDSENT:  Command sent (no response required)
+  *            @arg SDMMC_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *            @arg SDMMC_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *            @arg SDMMC_FLAG_CMDACT:   Command transfer in progress
+  *            @arg SDMMC_FLAG_TXACT:    Data transmit in progress
+  *            @arg SDMMC_FLAG_RXACT:    Data receive in progress
+  *            @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+  *            @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full
+  *            @arg SDMMC_FLAG_TXFIFOF:  Transmit FIFO full
+  *            @arg SDMMC_FLAG_RXFIFOF:  Receive FIFO full
+  *            @arg SDMMC_FLAG_TXFIFOE:  Transmit FIFO empty
+  *            @arg SDMMC_FLAG_RXFIFOE:  Receive FIFO empty
+  *            @arg SDMMC_FLAG_TXDAVL:   Data available in transmit FIFO
+  *            @arg SDMMC_FLAG_RXDAVL:   Data available in receive FIFO
+  *            @arg SDMMC_FLAG_SDIOIT:   SD I/O interrupt received
+  * @retval The new state of SD FLAG (SET or RESET).
+  */
+#define __HAL_SD_SDMMC_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+  * @brief  Clear the SD's pending flags.
+  * @param  __HANDLE__: SD Handle  
+  * @param  __FLAG__: specifies the flag to clear.  
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *            @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *            @arg SDMMC_FLAG_CTIMEOUT: Command response timeout
+  *            @arg SDMMC_FLAG_DTIMEOUT: Data timeout
+  *            @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *            @arg SDMMC_FLAG_RXOVERR:  Received FIFO overrun error
+  *            @arg SDMMC_FLAG_CMDREND:  Command response received (CRC check passed)
+  *            @arg SDMMC_FLAG_CMDSENT:  Command sent (no response required)
+  *            @arg SDMMC_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *            @arg SDMMC_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *            @arg SDMMC_FLAG_SDIOIT:   SD I/O interrupt received
+  * @retval None
+  */
+#define __HAL_SD_SDMMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+  * @brief  Check whether the specified SD interrupt has occurred or not.
+  * @param  __HANDLE__: SD Handle   
+  * @param  __INTERRUPT__: specifies the SDMMC interrupt source to check. 
+  *          This parameter can be one of the following values:
+  *            @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDMMC_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDMMC_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDMMC_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDMMC_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDMMC_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDMMC_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDMMC_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDMMC_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDMMC_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDMMC_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDMMC_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDMMC_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDMMC_IT_SDIOIT:   SD I/O interrupt received interrupt
+  * @retval The new state of SD IT (SET or RESET).
+  */
+#define __HAL_SD_SDMMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+  * @brief  Clear the SD's interrupt pending bits.
+  * @param  __HANDLE__: SD Handle
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear. 
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDMMC_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDMMC_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDMMC_IT_DATAEND:  Data end (data counter, SDMMC_DCOUNT, is zero) interrupt
+  *            @arg SDMMC_IT_SDIOIT:   SD I/O interrupt received interrupt
+  * @retval None
+  */
+#define __HAL_SD_SDMMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+/**
+  * @}
+  */
+  
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SD_Exported_Functions SD Exported Functions
+  * @{
+  */
+  
+/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo);
+HAL_StatusTypeDef   HAL_SD_DeInit (SD_HandleTypeDef *hsd);
+void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
+void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
+/**
+  * @}
+  */
+  
+/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+/* Blocking mode: Polling */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr);
+
+/* Non-Blocking mode: Interrupt */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
+
+/* Callback in non blocking modes (DMA) */
+void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd);
+void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd);
+
+/* Non-Blocking mode: DMA */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+/**
+  * @}
+  */
+  
+/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo);
+HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode);
+HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd);
+HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd);
+/**
+  * @}
+  */
+  
+/* Peripheral State functions  ************************************************/
+/** @defgroup SD_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
+HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus);
+HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd);
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+    
+/* Private types -------------------------------------------------------------*/
+/** @defgroup SD_Private_Types SD Private Types
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup SD_Private_Defines SD Private Defines
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+          
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup SD_Private_Variables SD Private Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SD_Private_Constants SD Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SD_Private_Macros SD Private Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SD_Private_Functions SD Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_SD_H */ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_sdram.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,859 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_sdram.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   SDRAM HAL module driver.
+  *          This file provides a generic firmware to drive SDRAM memories mounted 
+  *          as external device.
+  *         
+  @verbatim
+  ==============================================================================
+                       ##### How to use this driver #####
+  ============================================================================== 
+  [..]
+    This driver is a generic layered driver which contains a set of APIs used to 
+    control SDRAM memories. It uses the FMC layer functions to interface 
+    with SDRAM devices.  
+    The following sequence should be followed to configure the FMC to interface
+    with SDRAM memories: 
+      
+   (#) Declare a SDRAM_HandleTypeDef handle structure, for example:
+          SDRAM_HandleTypeDef  hdsram 
+          
+       (++) Fill the SDRAM_HandleTypeDef handle "Init" field with the allowed 
+            values of the structure member.
+            
+       (++) Fill the SDRAM_HandleTypeDef handle "Instance" field with a predefined 
+            base register instance for NOR or SDRAM device 
+             
+   (#) Declare a FMC_SDRAM_TimingTypeDef structure; for example:
+          FMC_SDRAM_TimingTypeDef  Timing;
+      and fill its fields with the allowed values of the structure member.
+      
+   (#) Initialize the SDRAM Controller by calling the function HAL_SDRAM_Init(). This function
+       performs the following sequence:
+          
+       (##) MSP hardware layer configuration using the function HAL_SDRAM_MspInit()
+       (##) Control register configuration using the FMC SDRAM interface function 
+            FMC_SDRAM_Init()
+       (##) Timing register configuration using the FMC SDRAM interface function 
+            FMC_SDRAM_Timing_Init()
+       (##) Program the SDRAM external device by applying its initialization sequence
+            according to the device plugged in your hardware. This step is mandatory
+            for accessing the SDRAM device.   
+
+   (#) At this stage you can perform read/write accesses from/to the memory connected 
+       to the SDRAM Bank. You can perform either polling or DMA transfer using the
+       following APIs:
+       (++) HAL_SDRAM_Read()/HAL_SDRAM_Write() for polling read/write access
+       (++) HAL_SDRAM_Read_DMA()/HAL_SDRAM_Write_DMA() for DMA read/write transfer
+       
+   (#) You can also control the SDRAM device by calling the control APIs HAL_SDRAM_WriteOperation_Enable()/
+       HAL_SDRAM_WriteOperation_Disable() to respectively enable/disable the SDRAM write operation or 
+       the function HAL_SDRAM_SendCommand() to send a specified command to the SDRAM
+       device. The command to be sent must be configured with the FMC_SDRAM_CommandTypeDef 
+       structure.   
+       
+   (#) You can continuously monitor the SDRAM device HAL state by calling the function
+       HAL_SDRAM_GetState()         
+      
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SDRAM SDRAM
+  * @brief SDRAM driver modules
+  * @{
+  */
+#ifdef HAL_SDRAM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/    
+/* Private variables ---------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SDRAM_Exported_Functions SDRAM Exported Functions
+  * @{
+  */
+
+/** @defgroup SDRAM_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @brief    Initialization and Configuration functions 
+  *
+  @verbatim    
+  ==============================================================================
+           ##### SDRAM Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to initialize/de-initialize
+    the SDRAM memory
+  
+@endverbatim
+  * @{
+  */
+    
+/**
+  * @brief  Performs the SDRAM device initialization sequence.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  Timing: Pointer to SDRAM control timing structure 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing)
+{   
+  /* Check the SDRAM handle parameter */
+  if(hsdram == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  if(hsdram->State == HAL_SDRAM_STATE_RESET)
+  {  
+    /* Allocate lock resource and initialize it */
+    hsdram->Lock = HAL_UNLOCKED;
+    /* Initialize the low level hardware (MSP) */
+    HAL_SDRAM_MspInit(hsdram);
+  }
+  
+  /* Initialize the SDRAM controller state */
+  hsdram->State = HAL_SDRAM_STATE_BUSY;
+  
+  /* Initialize SDRAM control Interface */
+  FMC_SDRAM_Init(hsdram->Instance, &(hsdram->Init));
+  
+  /* Initialize SDRAM timing Interface */
+  FMC_SDRAM_Timing_Init(hsdram->Instance, Timing, hsdram->Init.SDBank); 
+  
+  /* Update the SDRAM controller state */
+  hsdram->State = HAL_SDRAM_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Perform the SDRAM device initialization sequence.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram)
+{
+  /* Initialize the low level hardware (MSP) */
+  HAL_SDRAM_MspDeInit(hsdram);
+
+  /* Configure the SDRAM registers with their reset values */
+  FMC_SDRAM_DeInit(hsdram->Instance, hsdram->Init.SDBank);
+
+  /* Reset the SDRAM controller state */
+  hsdram->State = HAL_SDRAM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hsdram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  SDRAM MSP Init.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval None
+  */
+__weak void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsdram);
+ 
+  /* NOTE: This function Should not be modified, when the callback is needed,
+            the HAL_SDRAM_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  SDRAM MSP DeInit.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval None
+  */
+__weak void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsdram);
+ 
+  /* NOTE: This function Should not be modified, when the callback is needed,
+            the HAL_SDRAM_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  This function handles SDRAM refresh error interrupt request.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval HAL status
+*/
+void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram)
+{
+  /* Check SDRAM interrupt Rising edge flag */
+  if(__FMC_SDRAM_GET_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_IT))
+  {
+    /* SDRAM refresh error interrupt callback */
+    HAL_SDRAM_RefreshErrorCallback(hsdram);
+    
+    /* Clear SDRAM refresh error interrupt pending bit */
+    __FMC_SDRAM_CLEAR_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_ERROR);
+  }
+}
+
+/**
+  * @brief  SDRAM Refresh error callback.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module. 
+  * @retval None
+  */
+__weak void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsdram);
+ 
+  /* NOTE: This function Should not be modified, when the callback is needed,
+            the HAL_SDRAM_RefreshErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  DMA transfer complete callback.
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+__weak void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdma);
+ 
+  /* NOTE: This function Should not be modified, when the callback is needed,
+            the HAL_SDRAM_DMA_XferCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  DMA transfer complete error callback.
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+__weak void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdma);
+ 
+  /* NOTE: This function Should not be modified, when the callback is needed,
+            the HAL_SDRAM_DMA_XferErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SDRAM_Exported_Functions_Group2 Input and Output functions 
+  * @brief    Input Output and memory control functions 
+  *
+  @verbatim    
+  ==============================================================================
+                    ##### SDRAM Input and Output functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to use and control the SDRAM memory
+  
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Reads 8-bit data buffer from the SDRAM memory.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer  
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize)
+{
+  __IO uint8_t *pSdramAddress = (uint8_t *)pAddress;
+  
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+  
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
+  {
+    return  HAL_ERROR; 
+  }  
+  
+  /* Read data from source */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *pDstBuffer = *(__IO uint8_t *)pSdramAddress;  
+    pDstBuffer++;
+    pSdramAddress++;
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);
+  
+  return HAL_OK; 
+}
+
+
+/**
+  * @brief  Writes 8-bit data buffer to SDRAM memory.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write  
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize)
+{
+  __IO uint8_t *pSdramAddress = (uint8_t *)pAddress;
+  uint32_t tmp = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+  
+  /* Check the SDRAM controller state */
+  tmp = hsdram->State;
+  
+  if(tmp == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+  {
+    return  HAL_ERROR; 
+  }
+  
+  /* Write data to memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *(__IO uint8_t *)pSdramAddress = *pSrcBuffer;
+    pSrcBuffer++;
+    pSdramAddress++;
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);    
+  
+  return HAL_OK;   
+}
+
+
+/**
+  * @brief  Reads 16-bit data buffer from the SDRAM memory. 
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer  
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize)
+{
+  __IO uint16_t *pSdramAddress = (uint16_t *)pAddress;
+  
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+  
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
+  {
+    return  HAL_ERROR; 
+  }  
+  
+  /* Read data from source */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *pDstBuffer = *(__IO uint16_t *)pSdramAddress;  
+    pDstBuffer++;
+    pSdramAddress++;               
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);       
+  
+  return HAL_OK; 
+}
+
+/**
+  * @brief  Writes 16-bit data buffer to SDRAM memory. 
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write  
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize)
+{
+  __IO uint16_t *pSdramAddress = (uint16_t *)pAddress;
+  uint32_t tmp = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+  
+  /* Check the SDRAM controller state */
+  tmp = hsdram->State;
+  
+  if(tmp == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+  {
+    return  HAL_ERROR; 
+  }
+  
+  /* Write data to memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *(__IO uint16_t *)pSdramAddress = *pSrcBuffer;
+    pSrcBuffer++;
+    pSdramAddress++;            
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);    
+  
+  return HAL_OK;   
+}
+
+/**
+  * @brief  Reads 32-bit data buffer from the SDRAM memory. 
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer  
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+  __IO uint32_t *pSdramAddress = (uint32_t *)pAddress;
+  
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+  
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
+  {
+    return  HAL_ERROR; 
+  }  
+  
+  /* Read data from source */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *pDstBuffer = *(__IO uint32_t *)pSdramAddress;  
+    pDstBuffer++;
+    pSdramAddress++;               
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);       
+  
+  return HAL_OK; 
+}
+
+/**
+  * @brief  Writes 32-bit data buffer to SDRAM memory. 
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write  
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+  __IO uint32_t *pSdramAddress = (uint32_t *)pAddress;
+  uint32_t tmp = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+  
+  /* Check the SDRAM controller state */
+  tmp = hsdram->State;
+  
+  if(tmp == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+  {
+    return  HAL_ERROR; 
+  }
+  
+  /* Write data to memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *(__IO uint32_t *)pSdramAddress = *pSrcBuffer;
+    pSrcBuffer++;
+    pSdramAddress++;          
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);    
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Reads a Words data from the SDRAM memory using DMA transfer. 
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer  
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+  uint32_t tmp = 0;
+    
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+  
+  /* Check the SDRAM controller state */  
+  tmp = hsdram->State;
+  
+  if(tmp == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if(tmp == HAL_SDRAM_STATE_PRECHARGED)
+  {
+    return  HAL_ERROR; 
+  }  
+  
+  /* Configure DMA user callbacks */
+  hsdram->hdma->XferCpltCallback  = HAL_SDRAM_DMA_XferCpltCallback;
+  hsdram->hdma->XferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback;
+  
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);  
+  
+  return HAL_OK; 
+}
+
+/**
+  * @brief  Writes a Words data buffer to SDRAM memory using DMA transfer.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write  
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+  uint32_t tmp = 0;
+  
+  /* Process Locked */
+  __HAL_LOCK(hsdram);
+  
+  /* Check the SDRAM controller state */  
+  tmp = hsdram->State;
+  
+  if(tmp == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
+  {
+    return  HAL_ERROR; 
+  }  
+  
+  /* Configure DMA user callbacks */
+  hsdram->hdma->XferCpltCallback  = HAL_SDRAM_DMA_XferCpltCallback;
+  hsdram->hdma->XferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback;
+  
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsdram);
+  
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup SDRAM_Exported_Functions_Group3 Control functions 
+ *  @brief   management functions 
+ *
+@verbatim   
+  ==============================================================================
+                         ##### SDRAM Control functions #####
+  ==============================================================================  
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the SDRAM interface.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables dynamically SDRAM write protection.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram)
+{ 
+  /* Check the SDRAM controller state */ 
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_BUSY;
+  
+  /* Enable write protection */
+  FMC_SDRAM_WriteProtection_Enable(hsdram->Instance, hsdram->Init.SDBank);
+  
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Disables dynamically SDRAM write protection.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram)
+{
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_BUSY;
+  
+  /* Disable write protection */
+  FMC_SDRAM_WriteProtection_Disable(hsdram->Instance, hsdram->Init.SDBank);
+  
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Sends Command to the SDRAM bank.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @param  Command: SDRAM command structure
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */  
+HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout)
+{
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  }
+  
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_BUSY;
+  
+  /* Send SDRAM command */
+  FMC_SDRAM_SendCommand(hsdram->Instance, Command, Timeout);
+  
+  /* Update the SDRAM controller state state */
+  if(Command->CommandMode == FMC_SDRAM_CMD_PALL)
+  {
+    hsdram->State = HAL_SDRAM_STATE_PRECHARGED;
+  }
+  else
+  {
+    hsdram->State = HAL_SDRAM_STATE_READY;
+  }
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Programs the SDRAM Memory Refresh rate.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.  
+  * @param  RefreshRate: The SDRAM refresh rate value       
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate)
+{
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  } 
+  
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_BUSY;
+  
+  /* Program the refresh rate */
+  FMC_SDRAM_ProgramRefreshRate(hsdram->Instance ,RefreshRate);
+  
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_READY;
+  
+  return HAL_OK;   
+}
+
+/**
+  * @brief  Sets the Number of consecutive SDRAM Memory auto Refresh commands.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.  
+  * @param  AutoRefreshNumber: The SDRAM auto Refresh number       
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber)
+{
+  /* Check the SDRAM controller state */
+  if(hsdram->State == HAL_SDRAM_STATE_BUSY)
+  {
+    return HAL_BUSY;
+  } 
+  
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_BUSY;
+  
+  /* Set the Auto-Refresh number */
+  FMC_SDRAM_SetAutoRefreshNumber(hsdram->Instance ,AutoRefreshNumber);
+  
+  /* Update the SDRAM state */
+  hsdram->State = HAL_SDRAM_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Returns the SDRAM memory current mode.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval The SDRAM memory mode.        
+  */
+uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram)
+{
+  /* Return the SDRAM memory current mode */
+  return(FMC_SDRAM_GetModeStatus(hsdram->Instance, hsdram->Init.SDBank));
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup SDRAM_Exported_Functions_Group4 State functions 
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### SDRAM State functions #####
+  ==============================================================================  
+  [..]
+    This subsection permits to get in run-time the status of the SDRAM controller 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the SDRAM state.
+  * @param  hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
+  *                the configuration information for SDRAM module.
+  * @retval HAL state
+  */
+HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram)
+{
+  return hsdram->State;
+}
+
+/**
+  * @}
+  */    
+
+/**
+  * @}
+  */
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_sdram.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,199 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_sdram.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of SDRAM HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_SDRAM_H
+#define __STM32F7xx_HAL_SDRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_fmc.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SDRAM
+  * @{
+  */ 
+
+/* Exported typedef ----------------------------------------------------------*/   
+
+/** @defgroup SDRAM_Exported_Types SDRAM Exported Types
+  * @{
+  */
+	 
+/** 
+  * @brief  HAL SDRAM State structure definition  
+  */ 
+typedef enum
+{
+  HAL_SDRAM_STATE_RESET             = 0x00,  /*!< SDRAM not yet initialized or disabled */
+  HAL_SDRAM_STATE_READY             = 0x01,  /*!< SDRAM initialized and ready for use   */
+  HAL_SDRAM_STATE_BUSY              = 0x02,  /*!< SDRAM internal process is ongoing     */
+  HAL_SDRAM_STATE_ERROR             = 0x03,  /*!< SDRAM error state                     */
+  HAL_SDRAM_STATE_WRITE_PROTECTED   = 0x04,  /*!< SDRAM device write protected          */
+  HAL_SDRAM_STATE_PRECHARGED        = 0x05   /*!< SDRAM device precharged               */
+  
+}HAL_SDRAM_StateTypeDef;
+
+/** 
+  * @brief  SDRAM handle Structure definition  
+  */ 
+typedef struct
+{
+  FMC_SDRAM_TypeDef             *Instance;  /*!< Register base address                 */
+  
+  FMC_SDRAM_InitTypeDef         Init;       /*!< SDRAM device configuration parameters */
+  
+  __IO HAL_SDRAM_StateTypeDef   State;      /*!< SDRAM access state                    */
+  
+  HAL_LockTypeDef               Lock;       /*!< SDRAM locking object                  */ 
+
+  DMA_HandleTypeDef             *hdma;      /*!< Pointer DMA handler                   */
+  
+}SDRAM_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SDRAM_Exported_Macros SDRAM Exported Macros
+  * @{
+  */
+
+/** @brief Reset SDRAM handle state
+  * @param  __HANDLE__: specifies the SDRAM handle.
+  * @retval None
+  */
+#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SDRAM_Exported_Functions SDRAM Exported Functions
+  * @{
+  */
+
+/** @addtogroup SDRAM_Exported_Functions_Group1 
+  * @{
+  */
+
+/* Initialization/de-initialization functions *********************************/
+HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing);
+HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram);
+
+void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+
+/**
+  * @}
+  */
+
+/** @addtogroup SDRAM_Exported_Functions_Group2 
+  * @{
+  */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t * pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+/**
+  * @}
+  */
+  
+/** @addtogroup SDRAM_Exported_Functions_Group3 
+  * @{
+  */
+/* SDRAM Control functions  *****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate);
+HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber);
+uint32_t          HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram);
+
+/**
+  * @}
+  */
+
+/** @addtogroup SDRAM_Exported_Functions_Group4 
+  * @{
+  */
+/* SDRAM State functions ********************************************************/
+HAL_SDRAM_StateTypeDef  HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_SDRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_smartcard.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1339 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_smartcard.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   SMARTCARD HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the SMARTCARD peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State and Errors functions 
+  *           
+  @verbatim       
+  ==============================================================================
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    The SMARTCARD HAL driver can be used as follow:
+    
+    (#) Declare a SMARTCARD_HandleTypeDef handle structure.
+    (#) Associate a USART to the SMARTCARD handle hsc.
+    (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API:
+        (##) Enable the USARTx interface clock.
+        (##) SMARTCARD pins configuration:
+            (+++) Enable the clock for the SMARTCARD GPIOs.
+            (+++) Configure these SMARTCARD pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT()
+             and HAL_SMARTCARD_Receive_IT() APIs):
+            (+++) Configure the USARTx interrupt priority.
+            (+++) Enable the NVIC USART IRQ handle.
+            (+++) The specific USART interrupts (Transmission complete interrupt, 
+                  RXNE interrupt and Error Interrupts) will be managed using the macros
+                  __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.
+        (##) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA()
+             and HAL_SMARTCARD_Receive_DMA() APIs):
+            (+++) Declare a DMA handle structure for the Tx/Rx stream.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.                
+            (+++) Configure the DMA Tx/Rx Stream.
+            (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
+
+    (#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly,
+        the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission
+        error enabling or disabling in the hsc Init structure.
+        
+    (#) If required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, auto-retry counter,...)
+        in the hsc AdvancedInit structure.
+
+    (#) Initialize the SMARTCARD associated USART registers by calling
+        the HAL_SMARTCARD_Init() API. 
+    
+  [..]
+    (@) HAL_SMARTCARD_Init() API also configure also the low level Hardware GPIO, CLOCK, CORTEX...etc) by 
+        calling the customized HAL_SMARTCARD_MspInit() API.
+          
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SMARTCARD SMARTCARD
+  * @brief HAL USART SMARTCARD module driver
+  * @{
+  */
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants
+ * @{
+ */
+#define TEACK_REACK_TIMEOUT               1000
+#define HAL_SMARTCARD_TXDMA_TIMEOUTVALUE  22000
+#define USART_CR1_FIELDS      ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \
+                                          USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8))
+#define USART_CR2_CLK_FIELDS  ((uint32_t)(USART_CR2_CLKEN|USART_CR2_CPOL|USART_CR2_CPHA|USART_CR2_LBCL))   
+#define USART_CR2_FIELDS      ((uint32_t)(USART_CR2_RTOEN|USART_CR2_CLK_FIELDS|USART_CR2_STOP))
+#define USART_CR3_FIELDS      ((uint32_t)(USART_CR3_ONEBIT|USART_CR3_NACK|USART_CR3_SCARCNT))  
+/**
+  * @}
+  */
+/* Private macros -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SMARTCARD_Private_Functions
+  * @{
+  */
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma);
+static void SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsc);
+static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsc);
+static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc);
+static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc);
+static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsc);
+/**
+  * @}
+  */
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
+  * @{
+  */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group1 SmartCard Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+@verbatim
+===============================================================================
+            ##### Initialization and Configuration functions #####
+ ===============================================================================
+  [..]
+  This subsection provides a set of functions allowing to initialize the USART
+  associated to the SmartCard.
+      (+) These parameters can be configured: 
+        (++) Baud Rate
+        (++) Parity: parity should be enabled,
+             Frame Length is fixed to 8 bits plus parity:
+             the USART frame format is given in the following table:
+
+        (+++) +---------------------------------------------------------------+
+        (+++) | M1M0 bits |  PCE bit  |            USART frame                |
+        (+++) |-----------------------|---------------------------------------|
+        (+++) |     01    |    1      |    | SB | 8 bit data | PB | STB |     |
+        (+++) +---------------------------------------------------------------+
+
+        (++) Receiver/transmitter modes
+        (++) Synchronous mode (and if enabled, phase, polarity and last bit parameters)
+        (++) Prescaler value
+        (++) Guard bit time 
+        (++) NACK enabling or disabling on transmission error               
+
+      (+) The following advanced features can be configured as well:
+        (++) TX and/or RX pin level inversion
+        (++) data logical level inversion
+        (++) RX and TX pins swap
+        (++) RX overrun detection disabling
+        (++) DMA disabling on RX error
+        (++) MSB first on communication line
+        (++) Time out enabling (and if activated, timeout value)
+        (++) Block length
+        (++) Auto-retry counter       
+        
+    [..]                                                  
+    The HAL_SMARTCARD_Init() API follow respectively the USART (a)synchronous configuration procedures 
+    (details for the procedures are available in reference manual).
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Initializes the SMARTCARD mode according to the specified
+  *         parameters in the SMARTCARD_InitTypeDef and create the associated handle .
+  * @param hsc: SMARTCARD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* Check the SMARTCARD handle allocation */
+  if(hsc == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
+  
+  if(hsc->State == HAL_SMARTCARD_STATE_RESET)
+  { 
+    /* Allocate lock resource and initialize it */
+    hsc->Lock = HAL_UNLOCKED; 
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX */
+    HAL_SMARTCARD_MspInit(hsc);
+  }
+  
+  hsc->State = HAL_SMARTCARD_STATE_BUSY;
+
+  /* Disable the Peripheral */
+  __HAL_SMARTCARD_DISABLE(hsc);
+
+  /* Set the SMARTCARD Communication parameters */
+  SMARTCARD_SetConfig(hsc);
+
+  if(hsc->AdvancedInit.AdvFeatureInit != SMARTCARD_ADVFEATURE_NO_INIT)
+  {
+    SMARTCARD_AdvFeatureConfig(hsc);
+  }
+
+  /* In SmartCard mode, the following bits must be kept cleared: 
+  - LINEN in the USART_CR2 register,
+  - HDSEL and IREN  bits in the USART_CR3 register.*/
+  hsc->Instance->CR2 &= ~(USART_CR2_LINEN); 
+  hsc->Instance->CR3 &= ~(USART_CR3_HDSEL | USART_CR3_IREN); 
+
+  /* set the USART in SMARTCARD mode */ 
+  hsc->Instance->CR3 |= USART_CR3_SCEN; 
+  
+  /* Enable the Peripheral */
+  __HAL_SMARTCARD_ENABLE(hsc);
+  
+  /* TEACK and/or REACK to check before moving hsc->State to Ready */
+  return (SMARTCARD_CheckIdleState(hsc));
+}
+
+/**
+  * @brief DeInitializes the SMARTCARD peripheral 
+  * @param hsc: SMARTCARD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* Check the SMARTCARD handle allocation */
+  if(hsc == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
+
+  hsc->State = HAL_SMARTCARD_STATE_BUSY;
+
+  /* DeInit the low level hardware */
+  HAL_SMARTCARD_MspDeInit(hsc);
+
+  hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+  hsc->State = HAL_SMARTCARD_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hsc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief SMARTCARD MSP Init
+  * @param hsc: SMARTCARD handle
+  * @retval None
+  */
+ __weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsc);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief SMARTCARD MSP DeInit
+  * @param hsc: SMARTCARD handle
+  * @retval None
+  */
+ __weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsc);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions 
+  *  @brief   SMARTCARD Transmit and Receive functions 
+  *
+@verbatim   
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================  
+    This subsection provides a set of functions allowing to manage the SMARTCARD data transfers.
+
+    (#) There are two modes of transfer:
+       (+) Blocking mode: The communication is performed in polling mode. 
+            The HAL status of all data processing is returned by the same function 
+            after finishing transfer.  
+       (+) No-Blocking mode: The communication is performed using Interrupts 
+           or DMA, These API's return the HAL status.
+           The end of the data processing will be indicated through the 
+           dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when 
+           using DMA mode.
+           The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks 
+           will be executed respectively at the end of the Transmit or Receive process
+           The HAL_SMARTCARD_ErrorCallback()user callback will be executed when a communication error is detected
+
+    (#) Blocking mode API's are :
+        (+) HAL_SMARTCARD_Transmit()
+        (+) HAL_SMARTCARD_Receive() 
+        
+    (#) Non-Blocking mode API's with Interrupt are :
+        (+) HAL_SMARTCARD_Transmit_IT()
+        (+) HAL_SMARTCARD_Receive_IT()
+        (+) HAL_SMARTCARD_IRQHandler()
+        (+) SMARTCARD_Transmit_IT()
+        (+) SMARTCARD_Receive_IT()    
+
+    (#) No-Blocking mode functions with DMA are :
+        (+) HAL_SMARTCARD_Transmit_DMA()
+        (+) HAL_SMARTCARD_Receive_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+        (+) HAL_SMARTCARD_TxCpltCallback()
+        (+) HAL_SMARTCARD_RxCpltCallback()
+        (+) HAL_SMARTCARD_ErrorCallback()
+      
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Send an amount of data in blocking mode 
+  * @param hsc: SMARTCARD handle
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be sent
+  * @param Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  if((hsc->State == HAL_SMARTCARD_STATE_READY) || (hsc->State == HAL_SMARTCARD_STATE_BUSY_RX))
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsc);
+    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;    
+    /* Check if a non-blocking receive process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX) 
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
+    }
+    
+    hsc->TxXferSize = Size;
+    hsc->TxXferCount = Size;
+    while(hsc->TxXferCount > 0)
+    {
+      hsc->TxXferCount--;
+      if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TXE, RESET, Timeout) != HAL_OK)  
+      { 
+        return HAL_TIMEOUT;
+      }
+      hsc->Instance->TDR = (*pData++ & (uint8_t)0xFF);     
+    }
+    if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TC, RESET, Timeout) != HAL_OK)  
+    { 
+      return HAL_TIMEOUT;
+    }
+    /* Check if a non-blocking receive Process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_READY;
+    }
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsc);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in blocking mode 
+  * @param hsc: SMARTCARD handle
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be received
+  * @param Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  if((hsc->State == HAL_SMARTCARD_STATE_READY) || (hsc->State == HAL_SMARTCARD_STATE_BUSY_TX))
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsc);
+    
+    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    /* Check if a non-blocking transmit process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX) 
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
+    }
+
+    hsc->RxXferSize = Size;
+    hsc->RxXferCount = Size;
+    /* Check the remain data to be received */
+    while(hsc->RxXferCount > 0)
+    {
+      hsc->RxXferCount--;
+      if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_RXNE, RESET, Timeout) != HAL_OK)  
+      {
+        return HAL_TIMEOUT;
+      }
+      *pData++ = (uint8_t)(hsc->Instance->RDR & (uint8_t)0x00FF);              
+    }
+
+    /* Check if a non-blocking transmit process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_READY;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsc);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Send an amount of data in interrupt mode 
+  * @param hsc: SMARTCARD handle
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+  if((hsc->State == HAL_SMARTCARD_STATE_READY) || (hsc->State == HAL_SMARTCARD_STATE_BUSY_RX))
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsc);
+
+    hsc->pTxBuffPtr = pData;
+    hsc->TxXferSize = Size;
+    hsc->TxXferCount = Size;
+
+    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    /* Check if a receive process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX) 
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
+    }
+
+    /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_ERR);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsc);
+
+    /* Enable the SMARTCARD Transmit Complete Interrupt */
+    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TC);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in interrupt mode 
+  * @param hsc: SMARTCARD handle
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+  if((hsc->State == HAL_SMARTCARD_STATE_READY) || (hsc->State == HAL_SMARTCARD_STATE_BUSY_TX))
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsc);
+
+    hsc->pRxBuffPtr = pData;
+    hsc->RxXferSize = Size;
+    hsc->RxXferCount = Size;
+
+    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    /* Check if a transmit process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX) 
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
+    }
+    
+    /* Enable the SMARTCARD Parity Error Interrupt */
+    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_PE);
+
+    /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_ERR);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsc);
+
+    /* Enable the SMARTCARD Data Register not empty Interrupt */
+    __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_RXNE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Send an amount of data in DMA mode 
+  * @param hsc: SMARTCARD handle
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  
+  if((hsc->State == HAL_SMARTCARD_STATE_READY) || (hsc->State == HAL_SMARTCARD_STATE_BUSY_RX))
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsc);
+
+    hsc->pTxBuffPtr = pData;
+    hsc->TxXferSize = Size;
+    hsc->TxXferCount = Size;
+
+    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    /* Check if a receive process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX) 
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
+    }
+
+    /* Set the SMARTCARD DMA transfer complete callback */
+    hsc->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt;
+
+    /* Set the SMARTCARD error callback */
+    hsc->hdmatx->XferErrorCallback = SMARTCARD_DMAError;
+
+    /* Enable the SMARTCARD transmit DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hsc->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsc->Instance->TDR, Size);
+    
+	/* Clear the TC flag in the SR register by writing 0 to it */
+    __HAL_SMARTCARD_CLEAR_IT(hsc, SMARTCARD_FLAG_TC);
+
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the SMARTCARD associated USART CR3 register */
+    hsc->Instance->CR3 |= USART_CR3_DMAT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsc);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in DMA mode 
+  * @param hsc: SMARTCARD handle
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be received
+  * @note   The SMARTCARD-associated USART parity is enabled (PCE = 1), 
+  *         the received data contain the parity bit (MSB position)   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  
+  if((hsc->State == HAL_SMARTCARD_STATE_READY) || (hsc->State == HAL_SMARTCARD_STATE_BUSY_TX))
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hsc);
+
+    hsc->pRxBuffPtr = pData;
+    hsc->RxXferSize = Size;
+
+    hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+    /* Check if a transmit process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX) 
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
+    }
+
+    /* Set the SMARTCARD DMA transfer complete callback */
+    hsc->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt;
+
+    /* Set the SMARTCARD DMA error callback */
+    hsc->hdmarx->XferErrorCallback = SMARTCARD_DMAError;
+
+    /* Enable the DMA Stream */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(hsc->hdmarx, (uint32_t)&hsc->Instance->RDR, *(uint32_t*)tmp, Size);
+
+    /* Enable the DMA transfer for the receiver request by setting the DMAR bit 
+    in the SMARTCARD associated USART CR3 register */
+    hsc->Instance->CR3 |= USART_CR3_DMAR;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hsc);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+    
+/**
+  * @brief SMARTCARD interrupt requests handling.
+  * @param hsc: SMARTCARD handle
+  * @retval None
+  */
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* SMARTCARD parity error interrupt occurred -------------------------------*/
+  if((__HAL_SMARTCARD_GET_IT(hsc, SMARTCARD_IT_PE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_PE) != RESET))
+  { 
+    __HAL_SMARTCARD_CLEAR_IT(hsc, SMARTCARD_CLEAR_PEF);
+    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_PE;
+    /* Set the SMARTCARD state ready to be able to start again the process */
+    hsc->State = HAL_SMARTCARD_STATE_READY;
+  }
+  
+  /* SMARTCARD frame error interrupt occurred ---------------------------------*/
+  if((__HAL_SMARTCARD_GET_IT(hsc, SMARTCARD_IT_FE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR) != RESET))
+  { 
+    __HAL_SMARTCARD_CLEAR_IT(hsc, SMARTCARD_CLEAR_FEF);
+    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_FE;
+    /* Set the SMARTCARD state ready to be able to start again the process */
+    hsc->State = HAL_SMARTCARD_STATE_READY;
+  }
+  
+  /* SMARTCARD noise error interrupt occurred ---------------------------------*/
+  if((__HAL_SMARTCARD_GET_IT(hsc, SMARTCARD_IT_NE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR) != RESET))
+  { 
+    __HAL_SMARTCARD_CLEAR_IT(hsc, SMARTCARD_CLEAR_NEF);
+    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_NE; 
+    /* Set the SMARTCARD state ready to be able to start again the process */
+    hsc->State = HAL_SMARTCARD_STATE_READY;
+  }
+  
+  /* SMARTCARD Over-Run interrupt occurred ------------------------------------*/
+  if((__HAL_SMARTCARD_GET_IT(hsc, SMARTCARD_IT_ORE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR) != RESET))
+  { 
+    __HAL_SMARTCARD_CLEAR_IT(hsc, SMARTCARD_CLEAR_OREF);
+    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_ORE; 
+    /* Set the SMARTCARD state ready to be able to start again the process */
+    hsc->State = HAL_SMARTCARD_STATE_READY;
+  }
+  
+  /* SMARTCARD receiver timeout interrupt occurred ----------------------------*/
+  if((__HAL_SMARTCARD_GET_IT(hsc, SMARTCARD_IT_RTO) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_RTO) != RESET))
+  { 
+    __HAL_SMARTCARD_CLEAR_IT(hsc, SMARTCARD_CLEAR_RTOF);
+    hsc->ErrorCode |= HAL_SMARTCARD_ERROR_RTO; 
+    /* Set the SMARTCARD state ready to be able to start again the process */
+    hsc->State = HAL_SMARTCARD_STATE_READY;
+  }
+  
+  /* Call SMARTCARD Error Call back function if need be ----------------------*/
+  if(hsc->ErrorCode != HAL_SMARTCARD_ERROR_NONE)
+  {
+    HAL_SMARTCARD_ErrorCallback(hsc);
+  } 
+  
+  /* SMARTCARD in mode Receiver ----------------------------------------------*/
+  if((__HAL_SMARTCARD_GET_IT(hsc, SMARTCARD_IT_RXNE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_RXNE) != RESET))
+  { 
+    SMARTCARD_Receive_IT(hsc);
+    /* Clear RXNE interrupt flag */
+    __HAL_SMARTCARD_SEND_REQ(hsc, SMARTCARD_RXDATA_FLUSH_REQUEST);
+  }
+  
+  /* SMARTCARD in mode Receiver, end of block interruption -------------------*/
+  if((__HAL_SMARTCARD_GET_IT(hsc, SMARTCARD_IT_EOB) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_EOB) != RESET))
+  { 
+    hsc->State = HAL_SMARTCARD_STATE_READY;
+    HAL_SMARTCARD_RxCpltCallback(hsc);
+    /* Clear EOBF interrupt after HAL_SMARTCARD_RxCpltCallback() call for the End of Block information
+    * to be available during HAL_SMARTCARD_RxCpltCallback() processing */
+    __HAL_SMARTCARD_CLEAR_IT(hsc, SMARTCARD_CLEAR_EOBF);
+  }  
+  
+  /* SMARTCARD in mode Transmitter -------------------------------------------*/
+  if((__HAL_SMARTCARD_GET_IT(hsc, SMARTCARD_IT_TC) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_TC) != RESET))
+  {
+    SMARTCARD_Transmit_IT(hsc);
+  } 
+} 
+
+/**
+  * @brief Tx Transfer completed callbacks
+  * @param hsc: SMARTCARD handle
+  * @retval None
+  */
+ __weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsc);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_TxCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief Rx Transfer completed callbacks
+  * @param hsc: SMARTCARD handle
+  * @retval None
+  */
+__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsc);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_TxCpltCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief SMARTCARD error callbacks
+  * @param hsc: SMARTCARD handle
+  * @retval None
+  */
+ __weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsc);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SMARTCARD_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group3 Peripheral State functions 
+  *  @brief   SMARTCARD State functions 
+  *
+@verbatim   
+ ===============================================================================
+                ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to initialize the SMARTCARD.
+     (+) HAL_SMARTCARD_GetState() API is helpful to check in run-time the state of the SMARTCARD peripheral 
+     (+) SMARTCARD_SetConfig() API configures the SMARTCARD peripheral  
+     (+) SMARTCARD_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization 
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief return the SMARTCARD state
+  * @param hsc: SMARTCARD handle
+  * @retval HAL state
+  */
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc)
+{
+  return hsc->State;
+}
+
+/**
+  * @brief  Return the SMARTCARD error code
+  * @param  hsc : pointer to a SMARTCARD_HandleTypeDef structure that contains
+  *              the configuration information for the specified SMARTCARD.
+  * @retval SMARTCARD Error Code
+  */
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc)
+{
+  return hsc->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief Send an amount of data in non blocking mode 
+  * @param hsc: SMARTCARD handle.
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_SMARTCARD_Transmit_IT()      
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc)
+{
+  if((hsc->State == HAL_SMARTCARD_STATE_BUSY_TX) || (hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)) 
+  {
+    if(hsc->TxXferCount == 0)
+    {
+      /* Disable the SMARTCARD Transmit Complete Interrupt */
+      __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TC);
+      
+      /* Check if a receive Process is ongoing or not */
+      if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
+      {
+        hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
+      }
+      else
+      { 
+        /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+        __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR);
+      
+        hsc->State = HAL_SMARTCARD_STATE_READY;
+      }
+      
+      HAL_SMARTCARD_TxCpltCallback(hsc);
+      
+      return HAL_OK;
+    }
+    else
+    {    
+      hsc->Instance->TDR = (*hsc->pTxBuffPtr++ & (uint8_t)0xFF);     
+      hsc->TxXferCount--;
+  
+      return HAL_OK;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;   
+  }
+}
+
+/**
+  * @brief Receive an amount of data in non blocking mode 
+  * @param hsc: SMARTCARD handle.
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_SMARTCARD_Receive_IT()      
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc)
+{
+  if((hsc->State == HAL_SMARTCARD_STATE_BUSY_RX) || (hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX))
+  {
+    *hsc->pRxBuffPtr++ = (uint8_t)(hsc->Instance->RDR & (uint8_t)0xFF);  
+    
+    if(--hsc->RxXferCount == 0)
+    {
+      while(HAL_IS_BIT_SET(hsc->Instance->ISR, SMARTCARD_FLAG_RXNE))
+      {
+      }
+      __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE);
+      
+      /* Check if a transmit Process is ongoing or not */
+      if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
+      {
+        hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
+      }
+      else
+      {
+        /* Disable the SMARTCARD Parity Error Interrupt */
+        __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_PE);
+         
+        /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
+        __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR);
+        
+        hsc->State = HAL_SMARTCARD_STATE_READY;
+      }
+      
+      HAL_SMARTCARD_RxCpltCallback(hsc);
+      
+      return HAL_OK;
+    }
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief Configure the SMARTCARD associated USART peripheral 
+  * @param hsc: SMARTCARD handle
+  * @retval None
+  */
+static void SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsc)
+{
+  uint32_t tmpreg = 0x00000000;
+  uint32_t clocksource = 0x00000000;
+  
+  /* Check the parameters */ 
+  assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
+  assert_param(IS_SMARTCARD_BAUDRATE(hsc->Init.BaudRate)); 
+  assert_param(IS_SMARTCARD_WORD_LENGTH(hsc->Init.WordLength));  
+  assert_param(IS_SMARTCARD_STOPBITS(hsc->Init.StopBits));   
+  assert_param(IS_SMARTCARD_PARITY(hsc->Init.Parity));
+  assert_param(IS_SMARTCARD_MODE(hsc->Init.Mode));
+  assert_param(IS_SMARTCARD_POLARITY(hsc->Init.CLKPolarity));
+  assert_param(IS_SMARTCARD_PHASE(hsc->Init.CLKPhase));
+  assert_param(IS_SMARTCARD_LASTBIT(hsc->Init.CLKLastBit));    
+  assert_param(IS_SMARTCARD_ONE_BIT_SAMPLE(hsc->Init.OneBitSampling));
+  assert_param(IS_SMARTCARD_NACK(hsc->Init.NACKState));
+  assert_param(IS_SMARTCARD_TIMEOUT(hsc->Init.TimeOutEnable));
+  assert_param(IS_SMARTCARD_AUTORETRY_COUNT(hsc->Init.AutoRetryCount)); 
+
+  /*-------------------------- USART CR1 Configuration -----------------------*/
+  /* In SmartCard mode, M and PCE are forced to 1 (8 bits + parity).
+   * Oversampling is forced to 16 (OVER8 = 0).
+   * Configure the Parity and Mode: 
+   *  set PS bit according to hsc->Init.Parity value
+   *  set TE and RE bits according to hsc->Init.Mode value */
+  tmpreg = (uint32_t) hsc->Init.Parity | hsc->Init.Mode;
+  /* in case of TX-only mode, if NACK is enabled, the USART must be able to monitor 
+     the bidirectional line to detect a NACK signal in case of parity error. 
+     Therefore, the receiver block must be enabled as well (RE bit must be set). */
+  if((hsc->Init.Mode == SMARTCARD_MODE_TX) && (hsc->Init.NACKState == SMARTCARD_NACK_ENABLE))
+  {
+    tmpreg |= USART_CR1_RE;   
+  }
+  tmpreg |= (uint32_t) hsc->Init.WordLength;
+  MODIFY_REG(hsc->Instance->CR1, USART_CR1_FIELDS, tmpreg);
+
+  /*-------------------------- USART CR2 Configuration -----------------------*/
+  /* Stop bits are forced to 1.5 (STOP = 11) */
+  tmpreg = hsc->Init.StopBits;
+  /* Synchronous mode is activated by default */
+  tmpreg |= (uint32_t) USART_CR2_CLKEN | hsc->Init.CLKPolarity; 
+  tmpreg |= (uint32_t) hsc->Init.CLKPhase | hsc->Init.CLKLastBit;
+  tmpreg |= (uint32_t) hsc->Init.TimeOutEnable;
+  MODIFY_REG(hsc->Instance->CR2, USART_CR2_FIELDS, tmpreg); 
+    
+  /*-------------------------- USART CR3 Configuration -----------------------*/
+  /* Configure 
+   * - one-bit sampling method versus three samples' majority rule 
+   *   according to hsc->Init.OneBitSampling 
+   * - NACK transmission in case of parity error according 
+   *   to hsc->Init.NACKEnable   
+   * - autoretry counter according to hsc->Init.AutoRetryCount     */
+  tmpreg =  (uint32_t) hsc->Init.OneBitSampling | hsc->Init.NACKState;
+  tmpreg |= (uint32_t) (hsc->Init.AutoRetryCount << SMARTCARD_CR3_SCARCNT_LSB_POS);
+  MODIFY_REG(hsc->Instance-> CR3,USART_CR3_FIELDS, tmpreg);
+  
+  /*-------------------------- USART GTPR Configuration ----------------------*/
+  tmpreg = (uint32_t) (hsc->Init.Prescaler | (hsc->Init.GuardTime << SMARTCARD_GTPR_GT_LSB_POS));
+  MODIFY_REG(hsc->Instance->GTPR, (uint32_t)(USART_GTPR_GT|USART_GTPR_PSC), tmpreg); 
+  
+  /*-------------------------- USART RTOR Configuration ----------------------*/ 
+  tmpreg =   (uint32_t) (hsc->Init.BlockLength << SMARTCARD_RTOR_BLEN_LSB_POS);
+  if(hsc->Init.TimeOutEnable == SMARTCARD_TIMEOUT_ENABLE)
+  {
+    assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsc->Init.TimeOutValue));
+    tmpreg |=  (uint32_t) hsc->Init.TimeOutValue;
+  }
+  MODIFY_REG(hsc->Instance->RTOR, (USART_RTOR_RTO|USART_RTOR_BLEN), tmpreg);
+  
+  /*-------------------------- USART BRR Configuration -----------------------*/
+  SMARTCARD_GETCLOCKSOURCE(hsc, clocksource);
+  switch (clocksource)
+  {
+  case SMARTCARD_CLOCKSOURCE_PCLK1: 
+    hsc->Instance->BRR = (uint16_t)(HAL_RCC_GetPCLK1Freq() / hsc->Init.BaudRate);
+    break;
+  case SMARTCARD_CLOCKSOURCE_PCLK2: 
+    hsc->Instance->BRR = (uint16_t)(HAL_RCC_GetPCLK2Freq() / hsc->Init.BaudRate);
+    break;
+  case SMARTCARD_CLOCKSOURCE_HSI: 
+    hsc->Instance->BRR = (uint16_t)(HSI_VALUE / hsc->Init.BaudRate); 
+    break; 
+  case SMARTCARD_CLOCKSOURCE_SYSCLK:  
+    hsc->Instance->BRR = (uint16_t)(HAL_RCC_GetSysClockFreq() / hsc->Init.BaudRate);
+    break;  
+  case SMARTCARD_CLOCKSOURCE_LSE:                
+    hsc->Instance->BRR = (uint16_t)(LSE_VALUE / hsc->Init.BaudRate); 
+    break;
+  default:
+    break;
+  } 
+}
+
+/**
+  * @brief Check the SMARTCARD Idle State
+  * @param hsc: SMARTCARD handle
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsc)
+{
+  
+  /* Initialize the SMARTCARD ErrorCode */
+  hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
+
+  /* Check if the Transmitter is enabled */
+  if((hsc->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
+  {
+    /* Wait until TEACK flag is set */
+    if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, USART_ISR_TEACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)  
+    { 
+      return HAL_TIMEOUT;
+    } 
+  }
+  /* Check if the Receiver is enabled */
+  if((hsc->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
+  {
+    /* Wait until REACK flag is set */
+    if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, USART_ISR_REACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)  
+    { 
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsc);
+        
+  /* Initialize the SMARTCARD state*/
+  hsc->State= HAL_SMARTCARD_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief Configure the SMARTCARD associated USART peripheral advanced features 
+  * @param hsc: SMARTCARD handle  
+  * @retval None
+  */
+static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsc)
+{  
+  /* Check whether the set of advanced features to configure is properly set */ 
+  assert_param(IS_SMARTCARD_ADVFEATURE_INIT(hsc->AdvancedInit.AdvFeatureInit));
+  
+  /* if required, configure TX pin active level inversion */
+  if(HAL_IS_BIT_SET(hsc->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXINVERT_INIT))
+  {
+    assert_param(IS_SMARTCARD_ADVFEATURE_TXINV(hsc->AdvancedInit.TxPinLevelInvert));
+    MODIFY_REG(hsc->Instance->CR2, USART_CR2_TXINV, hsc->AdvancedInit.TxPinLevelInvert);
+  }
+  
+  /* if required, configure RX pin active level inversion */
+  if(HAL_IS_BIT_SET(hsc->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXINVERT_INIT))
+  {
+    assert_param(IS_SMARTCARD_ADVFEATURE_RXINV(hsc->AdvancedInit.RxPinLevelInvert));
+    MODIFY_REG(hsc->Instance->CR2, USART_CR2_RXINV, hsc->AdvancedInit.RxPinLevelInvert);
+  }
+  
+  /* if required, configure data inversion */
+  if(HAL_IS_BIT_SET(hsc->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DATAINVERT_INIT))
+  {
+    assert_param(IS_SMARTCARD_ADVFEATURE_DATAINV(hsc->AdvancedInit.DataInvert));
+    MODIFY_REG(hsc->Instance->CR2, USART_CR2_DATAINV, hsc->AdvancedInit.DataInvert);
+  }
+  
+  /* if required, configure RX/TX pins swap */
+  if(HAL_IS_BIT_SET(hsc->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_SWAP_INIT))
+  {
+    assert_param(IS_SMARTCARD_ADVFEATURE_SWAP(hsc->AdvancedInit.Swap));
+    MODIFY_REG(hsc->Instance->CR2, USART_CR2_SWAP, hsc->AdvancedInit.Swap);
+  }
+  
+  /* if required, configure RX overrun detection disabling */
+  if(HAL_IS_BIT_SET(hsc->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT))
+  {
+    assert_param(IS_SMARTCARD_OVERRUN(hsc->AdvancedInit.OverrunDisable));  
+    MODIFY_REG(hsc->Instance->CR3, USART_CR3_OVRDIS, hsc->AdvancedInit.OverrunDisable);
+  }
+  
+  /* if required, configure DMA disabling on reception error */
+  if(HAL_IS_BIT_SET(hsc->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT))
+  {
+    assert_param(IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(hsc->AdvancedInit.DMADisableonRxError));   
+    MODIFY_REG(hsc->Instance->CR3, USART_CR3_DDRE, hsc->AdvancedInit.DMADisableonRxError);
+  }
+  
+  /* if required, configure MSB first on communication line */  
+  if(HAL_IS_BIT_SET(hsc->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
+  {
+    assert_param(IS_SMARTCARD_ADVFEATURE_MSBFIRST(hsc->AdvancedInit.MSBFirst));   
+    MODIFY_REG(hsc->Instance->CR2, USART_CR2_MSBFIRST, hsc->AdvancedInit.MSBFirst);
+  }
+}
+  
+/**
+  * @brief  This function handles SMARTCARD Communication Timeout.
+  * @param  hsc: SMARTCARD handle
+  * @param  Flag: specifies the SMARTCARD flag to check.
+  * @param  Status: The new Flag status (SET or RESET).
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+  uint32_t tickstart = 0x00;
+
+  /* Get tick */ 
+  tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {    
+    while(__HAL_SMARTCARD_GET_FLAG(hsc, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE);
+          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE);
+          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_PE);
+          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR);
+
+          hsc->State= HAL_SMARTCARD_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hsc);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_SMARTCARD_GET_FLAG(hsc, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE);
+          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE);
+          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_PE);
+          __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR);
+
+          hsc->State= HAL_SMARTCARD_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hsc);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief DMA SMARTCARD transmit process complete callback 
+  * @param hdma: DMA handle
+  * @retval None
+  */
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)     
+{
+  SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hsc->TxXferCount = 0;
+  
+  /* Disable the DMA transfer for transmit request by setting the DMAT bit
+  in the SMARTCARD associated USART CR3 register */
+  hsc->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAT);
+  
+  /* Wait for SMARTCARD TC Flag */
+  if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TC, RESET, HAL_SMARTCARD_TXDMA_TIMEOUTVALUE) != HAL_OK)
+  {
+    /* Timeout Occurred */ 
+    hsc->State = HAL_SMARTCARD_STATE_TIMEOUT;
+    HAL_SMARTCARD_ErrorCallback(hsc);
+  }
+  else
+  {
+    /* No Timeout */
+    /* Check if a receive Process is ongoing or not */
+    if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
+    {
+      hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
+    }
+    else
+    {
+      hsc->State = HAL_SMARTCARD_STATE_READY;
+    }
+    HAL_SMARTCARD_TxCpltCallback(hsc);
+  }
+}
+
+/**
+  * @brief DMA SMARTCARD receive process complete callback 
+  * @param hdma: DMA handle
+  * @retval None
+  */
+static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)  
+{
+  SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hsc->RxXferCount = 0;
+  
+  /* Disable the DMA transfer for the receiver request by setting the DMAR bit 
+     in the SMARTCARD associated USART CR3 register */
+  hsc->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAR);
+  
+  /* Check if a transmit Process is ongoing or not */
+  if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
+  {
+    hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
+  }
+  else
+  {
+    hsc->State = HAL_SMARTCARD_STATE_READY;
+  }
+  
+  HAL_SMARTCARD_RxCpltCallback(hsc);
+}
+
+/**
+  * @brief DMA SMARTCARD communication error callback 
+  * @param hdma: DMA handle
+  * @retval None
+  */
+static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma)
+{
+  SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  hsc->RxXferCount = 0;
+  hsc->TxXferCount = 0;
+  hsc->State= HAL_SMARTCARD_STATE_READY;
+  hsc->ErrorCode |= HAL_SMARTCARD_ERROR_DMA;
+  HAL_SMARTCARD_ErrorCallback(hsc);
+}
+/**
+  * @}
+  */
+
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_smartcard.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,833 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_smartcard.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of SMARTCARD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_SMARTCARD_H
+#define __STM32F7xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SMARTCARD
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
+  * @{
+  */
+
+/** 
+  * @brief SMARTCARD Init Structure definition
+  */
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< Configures the SmartCard communication baud rate.
+                                           The baud rate register is computed using the following formula:
+                                              Baud Rate Register = ((PCLKx) / ((hsc->Init.BaudRate))) */
+                                           
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
+
+  uint32_t StopBits;                  /*!< Specifies the number of stop bits @ref SMARTCARD_Stop_Bits. 
+                                           Only 1.5 stop bits are authorized in SmartCard mode. */
+
+  uint32_t Parity;                    /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref SMARTCARD_Parity
+                                           @note The parity is enabled by default (PCE is forced to 1).
+                                                 Since the WordLength is forced to 8 bits + parity, M is
+                                                 forced to 1 and the parity bit is the 9th bit. */
+ 
+  uint32_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref SMARTCARD_Mode */
+
+  uint32_t CLKPolarity;               /*!< Specifies the steady state of the serial clock.
+                                           This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+  uint32_t CLKPhase;                  /*!< Specifies the clock transition on which the bit capture is made.
+                                           This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+  uint32_t CLKLastBit;                /*!< Specifies whether the clock pulse corresponding to the last transmitted
+                                           data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+                                           This parameter can be a value of @ref SMARTCARD_Last_Bit */
+                                             
+  uint32_t OneBitSampling;            /*!< Specifies  whether a single sample or three samples' majority vote is selected.
+                                           Selecting the single sample method increases the receiver tolerance to clock
+                                           deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling */
+
+  uint32_t  Prescaler;                 /*!< Specifies the SmartCard Prescaler */
+  
+  uint32_t  GuardTime;                 /*!< Specifies the SmartCard Guard Time */
+  
+  uint32_t NACKState;                  /*!< Specifies whether the SmartCard NACK transmission is enabled
+                                            in case of parity error.
+                                            This parameter can be a value of @ref SMARTCARD_NACK_State */ 
+                                           
+  uint32_t TimeOutEnable;              /*!< Specifies whether the receiver timeout is enabled. 
+                                            This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
+  
+  uint32_t TimeOutValue;               /*!< Specifies the receiver time out value in number of baud blocks: 
+                                            it is used to implement the Character Wait Time (CWT) and 
+                                            Block Wait Time (BWT). It is coded over 24 bits. */ 
+                                           
+  uint32_t BlockLength;                /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
+                                            This parameter can be any value from 0x0 to 0xFF */ 
+                                           
+  uint32_t AutoRetryCount;              /*!< Specifies the SmartCard auto-retry count (number of retries in
+                                             receive and transmit mode). When set to 0, retransmission is 
+                                             disabled. Otherwise, its maximum value is 7 (before signalling
+                                             an error) */  
+
+}SMARTCARD_InitTypeDef;
+
+/** 
+  * @brief  SMARTCARD advanced features initalization structure definition  
+  */
+typedef struct
+{
+  uint32_t AdvFeatureInit;            /*!< Specifies which advanced SMARTCARD features is initialized. Several
+                                           advanced features may be initialized at the same time. This parameter 
+                                           can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */
+
+  uint32_t TxPinLevelInvert;          /*!< Specifies whether the TX pin active level is inverted.
+                                           This parameter can be a value of @ref SMARTCARD_Tx_Inv  */
+
+  uint32_t RxPinLevelInvert;          /*!< Specifies whether the RX pin active level is inverted.
+                                           This parameter can be a value of @ref SMARTCARD_Rx_Inv  */
+
+  uint32_t DataInvert;                /*!< Specifies whether data are inverted (positive/direct logic
+                                           vs negative/inverted logic).
+                                           This parameter can be a value of @ref SMARTCARD_Data_Inv */
+
+  uint32_t Swap;                      /*!< Specifies whether TX and RX pins are swapped.   
+                                           This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
+
+  uint32_t OverrunDisable;            /*!< Specifies whether the reception overrun detection is disabled.   
+                                           This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
+
+  uint32_t DMADisableonRxError;       /*!< Specifies whether the DMA is disabled in case of reception error.     
+                                           This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
+
+  uint32_t MSBFirst;                  /*!< Specifies whether MSB is sent first on UART line.      
+                                           This parameter can be a value of @ref SMARTCARD_MSB_First */
+}SMARTCARD_AdvFeatureInitTypeDef;
+
+/** 
+  * @brief HAL State structures definition  
+  */ 
+typedef enum
+{
+  HAL_SMARTCARD_STATE_RESET             = 0x00,    /*!< Peripheral is not yet Initialized */
+  HAL_SMARTCARD_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use */
+  HAL_SMARTCARD_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing */
+  HAL_SMARTCARD_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing */
+  HAL_SMARTCARD_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing */
+  HAL_SMARTCARD_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission and Reception process is ongoing */ 
+  HAL_SMARTCARD_STATE_TIMEOUT           = 0x03,    /*!< Timeout state */
+  HAL_SMARTCARD_STATE_ERROR             = 0x04     /*!< Error */
+}HAL_SMARTCARD_StateTypeDef;
+
+
+/**
+  * @brief  SMARTCARD clock sources definition
+  */
+typedef enum
+{
+  SMARTCARD_CLOCKSOURCE_PCLK1      = 0x00,    /*!< PCLK1 clock source  */
+  SMARTCARD_CLOCKSOURCE_PCLK2      = 0x01,    /*!< PCLK2 clock source  */
+  SMARTCARD_CLOCKSOURCE_HSI        = 0x02,    /*!< HSI clock source    */
+  SMARTCARD_CLOCKSOURCE_SYSCLK     = 0x04,    /*!< SYSCLK clock source */
+  SMARTCARD_CLOCKSOURCE_LSE        = 0x08     /*!< LSE clock source    */
+}SMARTCARD_ClockSourceTypeDef;
+
+/** 
+  * @brief  SMARTCARD handle Structure definition
+  */
+typedef struct
+{
+  USART_TypeDef                       *Instance;        /* USART registers base address                          */
+
+  SMARTCARD_InitTypeDef               Init;             /* SmartCard communication parameters                    */
+
+  SMARTCARD_AdvFeatureInitTypeDef     AdvancedInit;     /* SmartCard advanced features initialization parameters */
+
+  uint8_t                             *pTxBuffPtr;      /* Pointer to SmartCard Tx transfer Buffer            */
+
+  uint16_t                            TxXferSize;       /* SmartCard Tx Transfer size                         */
+
+  uint16_t                            TxXferCount;      /* SmartCard Tx Transfer Counter                      */
+
+  uint8_t                             *pRxBuffPtr;      /* Pointer to SmartCard Rx transfer Buffer        */
+
+  uint16_t                            RxXferSize;       /* SmartCard Rx Transfer size                     */
+
+  uint16_t                            RxXferCount;      /* SmartCard Rx Transfer Counter                  */
+
+  DMA_HandleTypeDef                   *hdmatx;          /* SmartCard Tx DMA Handle parameters             */
+
+  DMA_HandleTypeDef                   *hdmarx;          /* SmartCard Rx DMA Handle parameters             */
+
+  HAL_LockTypeDef                     Lock;             /* Locking object                                 */
+
+  __IO HAL_SMARTCARD_StateTypeDef     State;            /* SmartCard communication state                  */
+
+  __IO uint32_t                       ErrorCode;        /* SmartCard Error code                           */
+
+}SMARTCARD_HandleTypeDef;
+
+/**
+  * @}
+  */
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants  SMARTCARD Exported constants
+  * @{
+  */
+/** @defgroup SMARTCARD_Error_Code SMARTCARD Error Code
+  * @brief    SMARTCARD Error Code 
+  * @{
+  */ 
+#define HAL_SMARTCARD_ERROR_NONE      ((uint32_t)0x00)    /*!< No error                */
+#define HAL_SMARTCARD_ERROR_PE        ((uint32_t)0x01)    /*!< Parity error            */
+#define HAL_SMARTCARD_ERROR_NE        ((uint32_t)0x02)    /*!< Noise error             */
+#define HAL_SMARTCARD_ERROR_FE        ((uint32_t)0x04)    /*!< frame error             */
+#define HAL_SMARTCARD_ERROR_ORE       ((uint32_t)0x08)    /*!< Overrun error           */
+#define HAL_SMARTCARD_ERROR_DMA       ((uint32_t)0x10)    /*!< DMA transfer error      */
+#define HAL_SMARTCARD_ERROR_RTO       ((uint32_t)0x20)    /*!< Receiver TimeOut error  */
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
+  * @{
+  */
+#define SMARTCARD_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M_0)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
+  * @{
+  */
+#define SMARTCARD_STOPBITS_1_5                   ((uint32_t)(USART_CR2_STOP))
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity
+  * @{
+  */
+#define SMARTCARD_PARITY_EVEN                    ((uint32_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD                     ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) 
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Mode
+  * @{
+  */
+#define SMARTCARD_MODE_RX                        ((uint32_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX                        ((uint32_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX                     ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
+  * @{
+  */
+#define SMARTCARD_POLARITY_LOW                   ((uint32_t)0x0000)
+#define SMARTCARD_POLARITY_HIGH                  ((uint32_t)USART_CR2_CPOL)
+/**
+  * @}
+  */ 
+
+/** @defgroup SMARTCARD_Clock_Phase  SMARTCARD Clock Phase
+  * @{
+  */
+#define SMARTCARD_PHASE_1EDGE                    ((uint32_t)0x0000)
+#define SMARTCARD_PHASE_2EDGE                    ((uint32_t)USART_CR2_CPHA)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Last_Bit  SMARTCARD Last Bit
+  * @{
+  */
+#define SMARTCARD_LASTBIT_DISABLE                ((uint32_t)0x0000)
+#define SMARTCARD_LASTBIT_ENABLE                 ((uint32_t)USART_CR2_LBCL)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD OneBit Sampling
+  * @{
+  */
+#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE   ((uint32_t)0x0000)
+#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE    ((uint32_t)USART_CR3_ONEBIT)
+/**
+  * @}
+  */  
+
+
+/** @defgroup SMARTCARD_NACK_State  SMARTCARD NACK State
+  * @{
+  */
+#define SMARTCARD_NACK_ENABLE           ((uint32_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLE          ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable
+  * @{
+  */
+#define SMARTCARD_TIMEOUT_DISABLE      ((uint32_t)0x00000000)
+#define SMARTCARD_TIMEOUT_ENABLE       ((uint32_t)USART_CR2_RTOEN)
+/**
+  * @}
+  */
+  
+/** @defgroup SMARTCARD_DMA_Requests   SMARTCARD DMA requests
+  * @{
+  */
+
+#define SMARTCARD_DMAREQ_TX                    ((uint32_t)USART_CR3_DMAT)
+#define SMARTCARD_DMAREQ_RX                    ((uint32_t)USART_CR3_DMAR)
+
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD Advanced Features Initialization Type
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_NO_INIT                 ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINVERT_INIT           ((uint32_t)0x00000001)
+#define SMARTCARD_ADVFEATURE_RXINVERT_INIT           ((uint32_t)0x00000002)
+#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT         ((uint32_t)0x00000004)
+#define SMARTCARD_ADVFEATURE_SWAP_INIT               ((uint32_t)0x00000008)
+#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT   ((uint32_t)0x00000010)
+#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT  ((uint32_t)0x00000020)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT           ((uint32_t)0x00000080)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Tx_Inv SMARTCARD Tx Inv
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_TXINV_DISABLE   ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINV_ENABLE    ((uint32_t)USART_CR2_TXINV)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Rx_Inv SMARTCARD Rx Inv
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_RXINV_DISABLE   ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_RXINV_ENABLE    ((uint32_t)USART_CR2_RXINV)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Data_Inv SMARTCARD Data Inv
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE     ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE      ((uint32_t)USART_CR2_DATAINV)
+/**
+  * @}
+  */ 
+  
+/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD Rx Tx Swap
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_SWAP_DISABLE   ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_SWAP_ENABLE    ((uint32_t)USART_CR2_SWAP)
+/**
+  * @}
+  */ 
+
+/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD Overrun Disable
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE   ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE  ((uint32_t)USART_CR3_OVRDIS)
+/**
+  * @}
+  */  
+
+/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD DMA Disable on Rx Error
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR       ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR      ((uint32_t)USART_CR3_DDRE)
+/**
+  * @}
+  */  
+
+/** @defgroup SMARTCARD_MSB_First SMARTCARD MSB First
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE      ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE       ((uint32_t)USART_CR2_MSBFIRST)
+/**
+  * @}
+  */  
+
+/** @defgroup SmartCard_Flags SMARTCARD Flags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the ISR register
+  * @{
+  */
+#define SMARTCARD_FLAG_REACK                     ((uint32_t)0x00400000)
+#define SMARTCARD_FLAG_TEACK                     ((uint32_t)0x00200000)
+#define SMARTCARD_FLAG_BUSY                      ((uint32_t)0x00010000)
+#define SMARTCARD_FLAG_EOBF                      ((uint32_t)0x00001000)
+#define SMARTCARD_FLAG_RTOF                      ((uint32_t)0x00000800)
+#define SMARTCARD_FLAG_TXE                       ((uint32_t)0x00000080)
+#define SMARTCARD_FLAG_TC                        ((uint32_t)0x00000040)
+#define SMARTCARD_FLAG_RXNE                      ((uint32_t)0x00000020)
+#define SMARTCARD_FLAG_IDLE                      ((uint32_t)0x00000010)
+#define SMARTCARD_FLAG_ORE                       ((uint32_t)0x00000008)
+#define SMARTCARD_FLAG_NE                        ((uint32_t)0x00000004)
+#define SMARTCARD_FLAG_FE                        ((uint32_t)0x00000002)
+#define SMARTCARD_FLAG_PE                        ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupt definition
+  *        Elements values convention: 0000ZZZZ0XXYYYYYb
+  *           - YYYYY  : Interrupt source position in the XX register (5bits)
+  *           - XX  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR2 register
+  *                 - 11: CR3 register
+  *           - ZZZZ  : Flag position in the ISR register(4bits)
+  * @{
+  */
+  
+#define SMARTCARD_IT_PE                          ((uint16_t)0x0028)
+#define SMARTCARD_IT_TXE                         ((uint16_t)0x0727)
+#define SMARTCARD_IT_TC                          ((uint16_t)0x0626)
+#define SMARTCARD_IT_RXNE                        ((uint16_t)0x0525)
+#define SMARTCARD_IT_IDLE                        ((uint16_t)0x0424)
+#define SMARTCARD_IT_ERR                         ((uint16_t)0x0060)
+#define SMARTCARD_IT_ORE                         ((uint16_t)0x0300)
+#define SMARTCARD_IT_NE                          ((uint16_t)0x0200)
+#define SMARTCARD_IT_FE                          ((uint16_t)0x0100)
+
+#define SMARTCARD_IT_EOB                         ((uint16_t)0x0C3B)
+#define SMARTCARD_IT_RTO                         ((uint16_t)0x0B3A)
+/**
+  * @}
+  */ 
+
+
+/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD IT CLEAR Flags
+  * @{
+  */
+#define SMARTCARD_CLEAR_PEF                       USART_ICR_PECF            /*!< Parity Error Clear Flag */          
+#define SMARTCARD_CLEAR_FEF                       USART_ICR_FECF            /*!< Framing Error Clear Flag */         
+#define SMARTCARD_CLEAR_NEF                       USART_ICR_NCF             /*!< Noise detected Clear Flag */        
+#define SMARTCARD_CLEAR_OREF                      USART_ICR_ORECF           /*!< OverRun Error Clear Flag */         
+#define SMARTCARD_CLEAR_IDLEF                     USART_ICR_IDLECF          /*!< Idle line detected clear Flag */
+#define SMARTCARD_CLEAR_TCF                       USART_ICR_TCCF            /*!< Transmission Complete Clear Flag */ 
+#define SMARTCARD_CLEAR_RTOF                      USART_ICR_RTOCF           /*!< Receiver Time Out Clear Flag */     
+#define SMARTCARD_CLEAR_EOBF                      USART_ICR_EOBCF           /*!< End Of Block Clear Flag */          
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters
+  * @{
+  */        
+#define SMARTCARD_RXDATA_FLUSH_REQUEST        ((uint32_t)USART_RQR_RXFRQ)        /*!< Receive Data flush Request */ 
+#define SMARTCARD_TXDATA_FLUSH_REQUEST        ((uint32_t)USART_RQR_TXFRQ)        /*!< Transmit data flush Request */
+/**
+  * @}
+  */
+  
+  
+/** @defgroup SMARTCARD_CR3_SCAR_CNT_LSB_POS SMARTCARD CR3 SCAR CNT LSB POS
+  * @{
+  */
+#define SMARTCARD_CR3_SCARCNT_LSB_POS            ((uint32_t) 17)
+/**
+  * @}
+  */
+  
+/** @defgroup SMARTCARD_GTPR_GT_LSBPOS SMARTCARD GTPR GT LSBPOS
+  * @{
+  */
+#define SMARTCARD_GTPR_GT_LSB_POS            ((uint32_t) 8)
+/**
+  * @}
+  */ 
+  
+/** @defgroup SMARTCARD_RTOR_BLEN_LSBPOS SMARTCARD RTOR BLEN LSBPOS
+  * @{
+  */
+#define SMARTCARD_RTOR_BLEN_LSB_POS          ((uint32_t) 24)
+/**
+  * @}
+  */    
+ 
+/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD Interruption Mask
+  * @{
+  */ 
+#define SMARTCARD_IT_MASK  ((uint16_t)0x001F)  
+/**
+  * @}
+  */
+    
+/**
+  * @}
+  */    
+    
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
+  * @{
+  */
+
+/** @brief Reset SMARTCARD handle state
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance which can be USART1 or USART2
+  * @retval None
+  */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+
+/** @brief  Flush the Smartcard DR register 
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @retval None
+  */
+#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) (__HAL_SMARTCARD_SEND_REQ((__HANDLE__), SMARTCARD_RXDATA_FLUSH_REQUEST))
+
+/** @brief  Checks whether the specified Smartcard flag is set or not.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg SMARTCARD_FLAG_REACK: Receive enable acknowledge flag
+  *            @arg SMARTCARD_FLAG_TEACK: Transmit enable acknowledge flag
+  *            @arg SMARTCARD_FLAG_BUSY:  Busy flag
+  *            @arg SMARTCARD_FLAG_EOBF:  End of block flag   
+  *            @arg SMARTCARD_FLAG_RTOF:  Receiver timeout flag
+  *            @arg SMARTCARD_FLAG_TXE:   Transmit data register empty flag
+  *            @arg SMARTCARD_FLAG_TC:    Transmission Complete flag
+  *            @arg SMARTCARD_FLAG_RXNE:  Receive data register not empty flag
+  *            @arg SMARTCARD_FLAG_ORE:   OverRun Error flag
+  *            @arg SMARTCARD_FLAG_NE:    Noise Error flag
+  *            @arg SMARTCARD_FLAG_FE:    Framing Error flag
+  *            @arg SMARTCARD_FLAG_PE:    Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Enables the specified SmartCard interrupt.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __INTERRUPT__: specifies the SMARTCARD interrupt to enable.
+  *          This parameter can be one of the following values:
+  *            @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+  *            @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+  *            @arg SMARTCARD_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg SMARTCARD_IT_TC:   Transmission complete interrupt
+  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg SMARTCARD_IT_PE:   Parity Error interrupt
+  *            @arg SMARTCARD_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__)   (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 |= (1 << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+                                                        ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 |= (1 << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+                                                        ((__HANDLE__)->Instance->CR3 |= (1 << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+/** @brief  Disables the specified SmartCard interrupt.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __INTERRUPT__: specifies the SMARTCARD interrupt to enable.
+  *          This parameter can be one of the following values:
+  *            @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+  *            @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+  *            @arg SMARTCARD_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg SMARTCARD_IT_TC:   Transmission complete interrupt
+  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg SMARTCARD_IT_PE:   Parity Error interrupt
+  *            @arg SMARTCARD_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__)  (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+                                                        ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+                                                        ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+/** @brief  Checks whether the specified SmartCard interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __IT__: specifies the SMARTCARD interrupt to check.
+  *          This parameter can be one of the following values:
+  *            @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+  *            @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt  
+  *            @arg SMARTCARD_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg SMARTCARD_IT_TC:   Transmission complete interrupt
+  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg SMARTCARD_IT_ORE:  OverRun Error interrupt
+  *            @arg SMARTCARD_IT_NE:   Noise Error interrupt
+  *            @arg SMARTCARD_IT_FE:   Framing Error interrupt
+  *            @arg SMARTCARD_IT_PE:   Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08))) 
+
+/** @brief  Checks whether the specified SmartCard interrupt interrupt source is enabled.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __IT__: specifies the SMARTCARD interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+  *            @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt  
+  *            @arg SMARTCARD_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg SMARTCARD_IT_TC:   Transmission complete interrupt
+  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg SMARTCARD_IT_ORE:  OverRun Error interrupt
+  *            @arg SMARTCARD_IT_NE:   Noise Error interrupt
+  *            @arg SMARTCARD_IT_FE:   Framing Error interrupt
+  *            @arg SMARTCARD_IT_PE:   Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \
+                                                               (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << \
+                                                               (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK)))
+
+
+/** @brief  Clears the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+  *                       to clear the corresponding interrupt
+  *          This parameter can be one of the following values:
+  *            @arg USART_CLEAR_PEF: Parity Error Clear Flag
+  *            @arg USART_CLEAR_FEF: Framing Error Clear Flag
+  *            @arg USART_CLEAR_NEF: Noise detected Clear Flag
+  *            @arg USART_CLEAR_OREF: OverRun Error Clear Flag
+  *            @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
+  *            @arg USART_CLEAR_RTOF: Receiver Time Out Clear Flag
+  *            @arg USART_CLEAR_EOBF: End Of Block Clear Flag 
+  * @retval None
+  */
+#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) 
+
+/** @brief  Set a specific SMARTCARD request flag.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __REQ__: specifies the request flag to set
+  *          This parameter can be one of the following values:  
+  *            @arg SMARTCARD_RXDATA_FLUSH_REQUEST: Receive Data flush Request 
+  *            @arg SMARTCARD_TXDATA_FLUSH_REQUEST: Transmit data flush Request 
+  *
+  * @retval None
+  */ 
+#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint32_t)(__REQ__)) 
+
+/** @brief  Enable the USART associated to the SMARTCARD Handle
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @retval None
+  */
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__)               ( (__HANDLE__)->Instance->CR1 |=  USART_CR1_UE)
+
+/** @brief  Disable the USART associated to the SMARTCARD Handle
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @retval None
+  */
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__)              ( (__HANDLE__)->Instance->CR1 &=  ~USART_CR1_UE)
+
+/** @brief  Macros to enable or disable the SmartCard DMA request.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance which can be USART1 or USART2.
+  * @param  __REQUEST__: specifies the SmartCard DMA request.
+  *          This parameter can be one of the following values:
+  *            @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request
+  *            @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request
+  */
+#define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__)    ((__HANDLE__)->Instance->CR3 |=  (__REQUEST__))
+#define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__)   ((__HANDLE__)->Instance->CR3 &=  ~(__REQUEST__))
+/**
+  * @}
+  */
+
+/* Include SMARTCARD HAL Extension module */
+#include "stm32f7xx_hal_smartcard_ex.h"
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMARTCARD_Exported_Functions
+  * @{
+  */
+  
+/** @addtogroup SMARTCARD_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);
+/**
+  * @}
+  */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);
+/**
+  * @}
+  */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  **************************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants
+  * @{
+  */
+
+#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B) 
+#define IS_SMARTCARD_STOPBITS(__STOPBITS__) ((__STOPBITS__) == SMARTCARD_STOPBITS_1_5)
+#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \
+                                         ((__PARITY__) == SMARTCARD_PARITY_ODD))
+#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & (uint32_t)0xFFF3) == 0x00) && ((__MODE__) != (uint32_t)0x00))
+#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW) || ((__CPOL__) == SMARTCARD_POLARITY_HIGH))
+#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE))
+#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \
+                                           ((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE))
+#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \
+                                                  ((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE))
+#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \
+                                     ((__NACK__) == SMARTCARD_NACK_DISABLE))
+#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \
+                                           ((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE))
+#define IS_SMARTCARD_ADVFEATURE_INIT(INIT)           ((INIT) <= (SMARTCARD_ADVFEATURE_NO_INIT | \
+                                                            SMARTCARD_ADVFEATURE_TXINVERT_INIT | \
+                                                            SMARTCARD_ADVFEATURE_RXINVERT_INIT | \
+                                                            SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \
+                                                            SMARTCARD_ADVFEATURE_SWAP_INIT | \
+                                                            SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+                                                            SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT   | \
+                                                            SMARTCARD_ADVFEATURE_MSBFIRST_INIT))  
+#define IS_SMARTCARD_ADVFEATURE_TXINV(TXINV) (((TXINV) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \
+                                         ((TXINV) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
+#define IS_SMARTCARD_ADVFEATURE_RXINV(RXINV) (((RXINV) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \
+                                         ((RXINV) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
+#define IS_SMARTCARD_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \
+                                             ((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
+#define IS_SMARTCARD_ADVFEATURE_SWAP(SWAP) (((SWAP) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \
+                                       ((SWAP) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
+#define IS_SMARTCARD_OVERRUN(OVERRUN)         (((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \
+                                          ((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
+#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(DMA)      (((DMA) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+                                                   ((DMA) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
+#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001)
+#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFF)
+#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__)    ((__TIMEOUTVALUE__) <= 0xFFFFFF)
+#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__)         ((__COUNT__) <= 0x7)
+#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \
+                                               ((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
+#define IS_SMARTCARD_REQUEST_PARAMETER(PARAM) (((PARAM) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \
+                                               ((PARAM) == SMARTCARD_TXDATA_FLUSH_REQUEST))   
+
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_smartcard_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,184 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_smartcard_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   SMARTCARD HAL module driver.
+  *
+  *          This file provides extended firmware functions to manage the following 
+  *          functionalities of the SmartCard.
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions
+  @verbatim
+ ===============================================================================
+                        ##### How to use this driver #####
+ ===============================================================================
+    [..]
+    The Extended SMARTCARD HAL driver can be used as follow:
+
+    (#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(), 
+        then if required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, 
+        auto-retry counter,...) in the hsc AdvancedInit structure.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SMARTCARDEx SMARTCARDEx
+  * @brief SMARTCARD Extended HAL module driver
+  * @{
+  */
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+    
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup SMARTCARDEx_Exported_Functions SMARTCARDEx Exported Functions
+  * @{
+  */
+
+/** @defgroup SMARTCARDEx_Group1 Extended Peripheral Control functions
+  * @brief    Extended control functions
+  *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to initialize the SMARTCARD.
+     (+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly 
+     (+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly  
+     (+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature
+     (+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Update on the fly the SMARTCARD block length in RTOR register
+  * @param hsc: SMARTCARD handle
+  * @param BlockLength: SMARTCARD block length (8-bit long at most)  
+  * @retval None
+  */
+void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsc, uint8_t BlockLength)
+{
+  MODIFY_REG(hsc->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << SMARTCARD_RTOR_BLEN_LSB_POS));
+}
+
+/**
+  * @brief Update on the fly the receiver timeout value in RTOR register
+  * @param hsc: SMARTCARD handle
+  * @param TimeOutValue: receiver timeout value in number of baud blocks. The timeout
+  *                     value must be less or equal to 0x0FFFFFFFF. 
+  * @retval None
+  */
+void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsc, uint32_t TimeOutValue)
+{
+  assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsc->Init.TimeOutValue));
+  MODIFY_REG(hsc->Instance->RTOR, USART_RTOR_RTO, TimeOutValue); 
+}
+
+/**
+  * @brief Enable the SMARTCARD receiver timeout feature
+  * @param hsc: SMARTCARD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsc);
+
+  hsc->State = HAL_SMARTCARD_STATE_BUSY;
+
+  /* Set the USART RTOEN bit */
+  hsc->Instance->CR2 |= USART_CR2_RTOEN;
+
+  hsc->State = HAL_SMARTCARD_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsc);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Disable the SMARTCARD receiver timeout feature
+  * @param hsc: SMARTCARD handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsc)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsc);
+
+  hsc->State = HAL_SMARTCARD_STATE_BUSY;
+
+  /* Clear the USART RTOEN bit */
+  hsc->Instance->CR2 &= ~(USART_CR2_RTOEN);
+
+  hsc->State = HAL_SMARTCARD_STATE_READY;
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hsc);
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_smartcard_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,175 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_smartcard_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of SMARTCARD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_SMARTCARD_EX_H
+#define __STM32F7xx_HAL_SMARTCARD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SMARTCARDEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+   
+/** @brief  Reports the SMARTCARD clock source.
+  * @param  __HANDLE__: specifies the USART Handle
+  * @param  __CLOCKSOURCE__ : output variable   
+  * @retval the USART clocking source, written in __CLOCKSOURCE__.
+  */
+#define SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+  do {                                                             \
+    if((__HANDLE__)->Instance == USART1)                           \
+    {                                                              \
+       switch(__HAL_RCC_GET_USART1_SOURCE())                       \
+       {                                                           \
+        case RCC_USART1CLKSOURCE_PCLK2:                            \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK2;         \
+          break;                                                   \
+        case RCC_USART1CLKSOURCE_HSI:                              \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI;           \
+          break;                                                   \
+        case RCC_USART1CLKSOURCE_SYSCLK:                           \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK;        \
+          break;                                                   \
+        case RCC_USART1CLKSOURCE_LSE:                              \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE;           \
+          break;                                                   \
+        default:                                                   \
+          break;                                                   \
+       }                                                           \
+    }                                                              \
+    else if((__HANDLE__)->Instance == USART2)                      \
+    {                                                              \
+       switch(__HAL_RCC_GET_USART2_SOURCE())                       \
+       {                                                           \
+        case RCC_USART2CLKSOURCE_PCLK1:                            \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1;         \
+          break;                                                   \
+        case RCC_USART2CLKSOURCE_HSI:                              \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI;           \
+          break;                                                   \
+        case RCC_USART2CLKSOURCE_SYSCLK:                           \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK;        \
+          break;                                                   \
+        case RCC_USART2CLKSOURCE_LSE:                              \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE;           \
+          break;                                                   \
+        default:                                                   \
+          break;                                                   \
+       }                                                           \
+    }                                                              \
+    else if((__HANDLE__)->Instance == USART3)                      \
+    {                                                              \
+       switch(__HAL_RCC_GET_USART3_SOURCE())                       \
+       {                                                           \
+        case RCC_USART3CLKSOURCE_PCLK1:                            \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1;         \
+          break;                                                   \
+        case RCC_USART3CLKSOURCE_HSI:                              \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI;           \
+          break;                                                   \
+        case RCC_USART3CLKSOURCE_SYSCLK:                           \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK;        \
+          break;                                                   \
+        case RCC_USART3CLKSOURCE_LSE:                              \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE;           \
+          break;                                                   \
+        default:                                                   \
+          break;                                                   \
+       }                                                           \
+    }                                                              \
+    else if((__HANDLE__)->Instance == USART6)                      \
+    {                                                              \
+       switch(__HAL_RCC_GET_USART6_SOURCE())                       \
+       {                                                           \
+        case RCC_USART6CLKSOURCE_PCLK2:                            \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK2;         \
+          break;                                                   \
+        case RCC_USART6CLKSOURCE_HSI:                              \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI;           \
+          break;                                                   \
+        case RCC_USART6CLKSOURCE_SYSCLK:                           \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK;        \
+          break;                                                   \
+        case RCC_USART6CLKSOURCE_LSE:                              \
+          (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE;           \
+          break;                                                   \
+        default:                                                   \
+          break;                                                   \
+       }                                                           \
+    }                                                              \
+    } while(0)
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions  ****************************/
+/* IO operation functions *****************************************************/
+/* Peripheral Control functions ***********************************************/
+void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsc, uint8_t BlockLength);
+void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsc, uint32_t TimeOutValue);
+HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsc);
+
+/* Peripheral State and Error functions ***************************************/
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_SMARTCARD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_spdifrx.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1231 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_spdifrx.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   This file provides firmware functions to manage the following 
+  *          functionalities of the SPDIFRX audio interface:
+  *           + Initialization and Configuration
+  *           + Data transfers functions
+  *           + DMA transfers management
+  *           + Interrupts and flags management 
+  @verbatim
+ ===============================================================================
+                  ##### How to use this driver #####
+ ===============================================================================
+ [..]
+    The SPDIFRX HAL driver can be used as follow:
+    
+    (#) Declare SPDIFRX_HandleTypeDef handle structure.
+    (#) Initialize the SPDIFRX low level resources by implement the HAL_SPDIFRX_MspInit() API:
+        (##) Enable the SPDIFRX interface clock.                      
+        (##) SPDIFRX pins configuration:
+            (+++) Enable the clock for the SPDIFRX GPIOs.
+            (+++) Configure these SPDIFRX pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_SPDIFRX_ReceiveControlFlow_IT() and HAL_SPDIFRX_ReceiveDataFlow_IT() API's).
+            (+++) Configure the SPDIFRX interrupt priority.
+            (+++) Enable the NVIC SPDIFRX IRQ handle.
+        (##) DMA Configuration if you need to use DMA process (HAL_SPDIFRX_ReceiveDataFlow_DMA() and HAL_SPDIFRX_ReceiveControlFlow_DMA() API's).
+            (+++) Declare a DMA handle structure for the reception of the Data Flow channel.
+            (+++) Declare a DMA handle structure for the reception of the Control Flow channel.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure CtrlRx/DataRx with the required parameters.
+            (+++) Configure the DMA Channel.
+            (+++) Associate the initialized DMA handle to the SPDIFRX DMA CtrlRx/DataRx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the 
+                DMA CtrlRx/DataRx channel.
+  
+   (#) Program the input selection, re-tries number, wait for activity, channel status selection, data format, stereo mode and masking of user bits
+       using HAL_SPDIFRX_Init() function.
+
+   -@- The specific SPDIFRX interrupts (RXNE/CSRNE and Error Interrupts) will be managed using the macros
+       __SPDIFRX_ENABLE_IT() and __SPDIFRX_DISABLE_IT() inside the receive process.
+   -@- Make sure that ck_spdif clock is configured. 
+   
+   (#) Three operation modes are available within this driver :
+  
+   *** Polling mode for reception operation (for debug purpose) ***
+   ================================================================
+   [..]    
+     (+) Receive data flow in blocking mode using HAL_SPDIFRX_ReceiveDataFlow()
+         (+) Receive control flow of data in blocking mode using HAL_SPDIFRX_ReceiveControlFlow()
+   
+   *** Interrupt mode for reception operation ***
+   =========================================
+   [..]    
+     (+) Receive an amount of data (Data Flow) in non blocking mode using HAL_SPDIFRX_ReceiveDataFlow_IT() 
+         (+) Receive an amount of data (Control Flow) in non blocking mode using HAL_SPDIFRX_ReceiveControlFlow_IT() 
+     (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback 
+     (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
+     (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can 
+         add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
+
+   *** DMA mode for reception operation ***
+   ========================================
+   [..] 
+     (+) Receive an amount of data (Data Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveDataFlow_DMA() 
+         (+) Receive an amount of data (Control Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveControlFlow_DMA() 
+     (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback 
+     (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can 
+         add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
+     (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can 
+         add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
+     (+) Stop the DMA Transfer using HAL_SPDIFRX_DMAStop()
+
+   *** SPDIFRX HAL driver macros list ***
+   =============================================
+   [..]
+     Below the list of most used macros in USART HAL driver.
+      (+) __HAL_SPDIFRX_IDLE: Disable the specified SPDIFRX peripheral (IDEL State)
+      (+) __HAL_SPDIFRX_SYNC: Enable the synchronization state of the specified SPDIFRX peripheral (SYNC State) 
+      (+) __HAL_SPDIFRX_RCV: Enable the receive state of the specified SPDIFRX peripheral (RCV State)
+      (+) __HAL_SPDIFRX_ENABLE_IT : Enable the specified SPDIFRX interrupts
+      (+) __HAL_SPDIFRX_DISABLE_IT : Disable the specified SPDIFRX interrupts
+      (+) __HAL_SPDIFRX_GET_FLAG: Check whether the specified SPDIFRX flag is set or not.
+
+    [..]
+      (@) You can refer to the SPDIFRX HAL driver header file for more useful macros
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+/** @defgroup SPDIFRX SPDIFRX
+* @brief SPDIFRX HAL module driver
+* @{
+*/
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define SPDIFRX_TIMEOUT_VALUE  0xFFFF
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SPDIFRX_Private_Functions
+  * @{
+  */
+static void  SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma);
+static void  SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void  SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma);
+static void  SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma);
+static void  SPDIFRX_DMAError(DMA_HandleTypeDef *hdma);
+static void  SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
+static void  SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
+static HAL_StatusTypeDef  SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+/**
+  * @}
+  */
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SPDIFRX_Exported_Functions SPDIFRX Exported Functions
+  * @{
+  */
+
+/** @defgroup  SPDIFRX_Exported_Functions_Group1 Initialization and de-initialization functions 
+  *  @brief    Initialization and Configuration functions 
+  *
+  @verbatim    
+  ===============================================================================
+  ##### Initialization and de-initialization functions #####
+  ===============================================================================
+  [..]  This subsection provides a set of functions allowing to initialize and 
+  de-initialize the SPDIFRX peripheral:
+  
+  (+) User must Implement HAL_SPDIFRX_MspInit() function in which he configures 
+  all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+  
+  (+) Call the function HAL_SPDIFRX_Init() to configure the SPDIFRX peripheral with 
+  the selected configuration:
+  (++) Input Selection (IN0, IN1,...)
+  (++) Maximum allowed re-tries during synchronization phase
+  (++) Wait for activity on SPDIF selected input
+  (++) Channel status selection (from channel A or B)
+  (++) Data format (LSB, MSB, ...)
+  (++) Stereo mode
+  (++) User bits masking (PT,C,U,V,...)
+  
+  (+) Call the function HAL_SPDIFRX_DeInit() to restore the default configuration 
+  of the selected SPDIFRXx peripheral. 
+  @endverbatim
+  * @{
+  */
+
+/**
+  * @brief Initializes the SPDIFRX according to the specified parameters 
+  *        in the SPDIFRX_InitTypeDef and create the associated handle.
+  * @param hspdif: SPDIFRX handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the SPDIFRX handle allocation */
+  if(hspdif == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the SPDIFRX parameters */
+  assert_param(IS_STEREO_MODE(hspdif->Init.StereoMode));
+  assert_param(IS_SPDIFRX_INPUT_SELECT(hspdif->Init.InputSelection));
+  assert_param(IS_SPDIFRX_MAX_RETRIES(hspdif->Init.Retries));
+  assert_param(IS_SPDIFRX_WAIT_FOR_ACTIVITY(hspdif->Init.WaitForActivity));
+  assert_param(IS_SPDIFRX_CHANNEL(hspdif->Init.ChannelSelection));
+  assert_param(IS_SPDIFRX_DATA_FORMAT(hspdif->Init.DataFormat));
+  assert_param(IS_PREAMBLE_TYPE_MASK(hspdif->Init.PreambleTypeMask));
+  assert_param(IS_CHANNEL_STATUS_MASK(hspdif->Init.ChannelStatusMask));
+  assert_param(IS_VALIDITY_MASK(hspdif->Init.ValidityBitMask));
+  assert_param(IS_PARITY_ERROR_MASK(hspdif->Init.ParityErrorMask));
+  
+  if(hspdif->State == HAL_SPDIFRX_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hspdif->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
+    HAL_SPDIFRX_MspInit(hspdif);
+  }
+  
+     /* SPDIFRX peripheral state is BUSY*/
+   hspdif->State = HAL_SPDIFRX_STATE_BUSY;  
+  
+  /* Disable SPDIFRX interface (IDLE State) */
+  __HAL_SPDIFRX_IDLE(hspdif);
+  
+  /* Reset the old SPDIFRX CR configuration */
+  tmpreg = hspdif->Instance->CR;
+  
+  tmpreg &= ~((uint16_t) SPDIFRX_CR_RXSTEO  | SPDIFRX_CR_DRFMT  | SPDIFRX_CR_PMSK |
+                         SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK  |
+                         SPDIFRX_CR_CHSEL | SPDIFRX_CR_NBTR | SPDIFRX_CR_WFA |
+                         SPDIFRX_CR_INSEL); 
+                  
+  /* Sets the new configuration of the SPDIFRX peripheral */
+  tmpreg |= ((uint16_t) hspdif->Init.StereoMode |
+                        hspdif->Init.InputSelection |
+                        hspdif->Init.Retries |
+                        hspdif->Init.WaitForActivity |
+                        hspdif->Init.ChannelSelection |
+                        hspdif->Init.DataFormat |
+                        hspdif->Init.PreambleTypeMask |
+                        hspdif->Init.ChannelStatusMask |
+                        hspdif->Init.ValidityBitMask |
+                        hspdif->Init.ParityErrorMask);
+
+  hspdif->Instance->CR = tmpreg;  
+  
+  hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+    
+    /* SPDIFRX peripheral state is READY*/
+  hspdif->State = HAL_SPDIFRX_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief DeInitializes the SPDIFRX peripheral 
+  * @param hspdif: SPDIFRX handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* Check the SPDIFRX handle allocation */
+  if(hspdif == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_SPDIFRX_ALL_INSTANCE(hspdif->Instance));
+
+  hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+  
+  /* Disable SPDIFRX interface (IDLE state) */
+  __HAL_SPDIFRX_IDLE(hspdif);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+  HAL_SPDIFRX_MspDeInit(hspdif);
+  
+  hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+    
+    /* SPDIFRX peripheral state is RESET*/
+  hspdif->State = HAL_SPDIFRX_STATE_RESET;
+  
+  /* Release Lock */
+  __HAL_UNLOCK(hspdif);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief SPDIFRX MSP Init
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif)
+{
+   /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspdif);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_MspInit could be implemented in the user file
+  */ 
+}
+
+/**
+  * @brief SPDIFRX MSP DeInit
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspdif);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_MspDeInit could be implemented in the user file
+  */ 
+}
+
+/**
+  * @brief Sets the SPDIFRX  dtat format according to the specified parameters 
+  *        in the SPDIFRX_InitTypeDef.
+  * @param hspdif: SPDIFRX handle
+  * @param sDataFormat: SPDIFRX data format
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef  sDataFormat)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the SPDIFRX handle allocation */
+  if(hspdif == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the SPDIFRX parameters */
+  assert_param(IS_STEREO_MODE(sDataFormat.StereoMode));
+  assert_param(IS_SPDIFRX_DATA_FORMAT(sDataFormat.DataFormat));
+  assert_param(IS_PREAMBLE_TYPE_MASK(sDataFormat.PreambleTypeMask));
+  assert_param(IS_CHANNEL_STATUS_MASK(sDataFormat.ChannelStatusMask));
+  assert_param(IS_VALIDITY_MASK(sDataFormat.ValidityBitMask));
+  assert_param(IS_PARITY_ERROR_MASK(sDataFormat.ParityErrorMask));
+  
+  /* Reset the old SPDIFRX CR configuration */
+  tmpreg = hspdif->Instance->CR;
+  
+  if(((tmpreg & SPDIFRX_STATE_RCV) == SPDIFRX_STATE_RCV) &&
+    (((tmpreg & SPDIFRX_CR_DRFMT) != sDataFormat.DataFormat) ||
+    ((tmpreg & SPDIFRX_CR_RXSTEO) != sDataFormat.StereoMode)))  
+  {
+      return HAL_ERROR;    
+  }  
+  
+  tmpreg &= ~((uint16_t) SPDIFRX_CR_RXSTEO  | SPDIFRX_CR_DRFMT  | SPDIFRX_CR_PMSK |
+                         SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK);   
+  
+  /* Sets the new configuration of the SPDIFRX peripheral */
+  tmpreg |= ((uint16_t) sDataFormat.StereoMode |
+                        sDataFormat.DataFormat |
+                        sDataFormat.PreambleTypeMask |
+                        sDataFormat.ChannelStatusMask |
+                        sDataFormat.ValidityBitMask |
+                        sDataFormat.ParityErrorMask);
+
+  hspdif->Instance->CR = tmpreg;  
+  
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Exported_Functions_Group2 IO operation functions 
+  *  @brief Data transfers functions 
+  *
+@verbatim   
+===============================================================================
+                     ##### IO operation functions #####
+===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to manage the SPDIFRX data 
+    transfers.
+
+    (#) There is two mode of transfer:
+        (++) Blocking mode : The communication is performed in the polling mode. 
+             The status of all data processing is returned by the same function 
+             after finishing transfer.  
+        (++) No-Blocking mode : The communication is performed using Interrupts 
+             or DMA. These functions return the status of the transfer start-up.
+             The end of the data processing will be indicated through the 
+             dedicated SPDIFRX IRQ when using Interrupt mode or the DMA IRQ when 
+             using DMA mode.
+
+    (#) Blocking mode functions are :
+        (++) HAL_SPDIFRX_ReceiveDataFlow()
+        (++) HAL_SPDIFRX_ReceiveControlFlow()
+                (+@) Do not use blocking mode to receive both control and data flow at the same time.
+
+    (#) No-Blocking mode functions with Interrupt are :
+        (++) HAL_SPDIFRX_ReceiveControlFlow_IT()
+        (++) HAL_SPDIFRX_ReceiveDataFlow_IT()
+
+    (#) No-Blocking mode functions with DMA are :
+        (++) HAL_SPDIFRX_ReceiveControlFlow_DMA()
+        (++) HAL_SPDIFRX_ReceiveDataFlow_DMA()
+
+    (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+        (++) HAL_SPDIFRX_RxCpltCallback()
+        (++) HAL_SPDIFRX_ErrorCallback()
+
+@endverbatim
+* @{
+*/
+
+
+/**
+  * @brief  Receives an amount of data (Data Flow) in blocking mode. 
+  * @param  hspdif: pointer to SPDIFRX_HandleTypeDef structure that contains
+  *                 the configuration information for SPDIFRX module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ 
+  if((pData == NULL ) || (Size == 0)) 
+  {
+    return  HAL_ERROR;
+  }
+  
+  if(hspdif->State == HAL_SPDIFRX_STATE_READY)
+  { 
+    /* Process Locked */
+    __HAL_LOCK(hspdif);
+    
+     hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+
+        /* Start synchronisation */
+        __HAL_SPDIFRX_SYNC(hspdif);
+        
+            /* Wait until SYNCD flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout) != HAL_OK)
+      { 
+        return HAL_TIMEOUT;
+      }  
+    
+            /* Start reception */    
+      __HAL_SPDIFRX_RCV(hspdif);
+            
+    /* Receive data flow */
+    while(Size > 0)
+    {      
+      /* Wait until RXNE flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      { 
+        return HAL_TIMEOUT;
+      }  
+      
+      (*pData++) = hspdif->Instance->DR;
+      Size--; 
+    }      
+
+    /* SPDIFRX ready */
+    hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspdif);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receives an amount of data (Control Flow) in blocking mode. 
+  * @param  hspdif: pointer to a SPDIFRX_HandleTypeDef structure that contains
+  *                 the configuration information for SPDIFRX module.
+  * @param  pData: Pointer to data buffer
+  * @param  Size: Amount of data to be received
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout)
+{
+ 
+  if((pData == NULL ) || (Size == 0)) 
+  {
+    return  HAL_ERROR;
+  }
+  
+  if(hspdif->State == HAL_SPDIFRX_STATE_READY)
+  { 
+    /* Process Locked */
+    __HAL_LOCK(hspdif);
+    
+     hspdif->State = HAL_SPDIFRX_STATE_BUSY;
+        
+        /* Start synchronization */
+        __HAL_SPDIFRX_SYNC(hspdif);
+        
+        /* Wait until SYNCD flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout) != HAL_OK)
+      { 
+        return HAL_TIMEOUT;
+      }  
+            
+        /* Start reception */    
+      __HAL_SPDIFRX_RCV(hspdif);
+   
+        /* Receive control flow */
+    while(Size > 0)
+    {      
+      /* Wait until CSRNE flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_CSRNE, RESET, Timeout) != HAL_OK)
+      { 
+        return HAL_TIMEOUT;
+      }  
+      
+      (*pData++) = hspdif->Instance->CSR;
+      Size--; 
+    }      
+
+    /* SPDIFRX ready */
+    hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspdif);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+/**
+  * @brief Receive an amount of data (Data Flow) in non-blocking mode with Interrupt
+  * @param hspdif: SPDIFRX handle
+  * @param pData: a 32-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be received .
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_CX))
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hspdif);
+
+    hspdif->pRxBuffPtr = pData;
+    hspdif->RxXferSize = Size;
+    hspdif->RxXferCount = Size;
+
+    hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+    
+    /* Check if a receive process is ongoing or not */
+     hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
+
+        
+    /* Enable the SPDIFRX  PE Error Interrupt */
+    __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+
+    /* Enable the SPDIFRX  OVR Error Interrupt */
+    __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspdif);
+
+    /* Enable the SPDIFRX RXNE interrupt */
+    __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+        
+        if (((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC) || ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00)) 
+        {
+        /* Start synchronization */
+        __HAL_SPDIFRX_SYNC(hspdif);
+        
+        /* Wait until SYNCD flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, SPDIFRX_TIMEOUT_VALUE) != HAL_OK)
+      { 
+        return HAL_TIMEOUT;
+      }  
+            
+        /* Start reception */    
+      __HAL_SPDIFRX_RCV(hspdif);
+        }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief Receive an amount of data (Control Flow) with Interrupt
+  * @param hspdif: SPDIFRX handle
+  * @param pData: a 32-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample (Control Flow) to be received :
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_RX))
+  {
+    if((pData == NULL ) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hspdif);
+
+    hspdif->pCsBuffPtr = pData;
+    hspdif->CsXferSize = Size;
+    hspdif->CsXferCount = Size;
+
+    hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+    
+    /* Check if a receive process is ongoing or not */
+     hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
+
+
+    /* Enable the SPDIFRX PE Error Interrupt */
+     __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+
+    /* Enable the SPDIFRX OVR Error Interrupt */
+     __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspdif);
+
+    /* Enable the SPDIFRX CSRNE interrupt */
+    __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+        
+        if (((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC) || ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00)) 
+        {
+        /* Start synchronization */
+        __HAL_SPDIFRX_SYNC(hspdif);
+        
+        /* Wait until SYNCD flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, SPDIFRX_TIMEOUT_VALUE) != HAL_OK)
+      { 
+        return HAL_TIMEOUT;
+      }  
+                        
+        /* Start reception */    
+      __HAL_SPDIFRX_RCV(hspdif);
+      }
+        
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief Receive an amount of data (Data Flow) mode with DMA 
+  * @param hspdif: SPDIFRX handle
+  * @param pData: a 32-bit pointer to the Receive data buffer.
+  * @param Size: number of data sample to be received :
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+  
+  if((pData == NULL) || (Size == 0)) 
+  {
+    return  HAL_ERROR;                                    
+  } 
+  
+  if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_CX))
+  {   
+    hspdif->pRxBuffPtr = pData;
+    hspdif->RxXferSize = Size;
+    hspdif->RxXferCount = Size;
+
+    /* Process Locked */
+    __HAL_LOCK(hspdif);
+    
+    hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+    hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
+    
+    /* Set the SPDIFRX Rx DMA Half transfer complete callback */
+    hspdif->hdmaDrRx->XferHalfCpltCallback = SPDIFRX_DMARxHalfCplt;
+    
+    /* Set the SPDIFRX Rx DMA transfer complete callback */
+    hspdif->hdmaDrRx->XferCpltCallback = SPDIFRX_DMARxCplt;
+    
+    /* Set the DMA error callback */
+    hspdif->hdmaDrRx->XferErrorCallback = SPDIFRX_DMAError;
+       
+    /* Enable the DMA request */
+    HAL_DMA_Start_IT(hspdif->hdmaDrRx, (uint32_t)&hspdif->Instance->DR, (uint32_t)hspdif->pRxBuffPtr, Size);
+
+    /* Enable RXDMAEN bit in SPDIFRX CR register for data flow reception*/
+     hspdif->Instance->CR |= SPDIFRX_CR_RXDMAEN;
+             
+        if (((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC) || ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00)) 
+        {
+        /* Start synchronization */
+        __HAL_SPDIFRX_SYNC(hspdif);
+        
+        /* Wait until SYNCD flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, SPDIFRX_TIMEOUT_VALUE) != HAL_OK)
+      { 
+        return HAL_TIMEOUT;
+      }  
+            
+        /* Start reception */    
+      __HAL_SPDIFRX_RCV(hspdif);
+        }
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspdif);
+     
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief Receive an amount of data (Control Flow) with DMA 
+  * @param hspdif: SPDIFRX handle
+  * @param pData: a 32-bit pointer to the Receive data buffer.
+  * @param Size: number of data (Control Flow) sample to be received :
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
+{
+  
+  if((pData == NULL) || (Size == 0)) 
+  {
+    return  HAL_ERROR;                                    
+  } 
+  
+ if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_RX))
+  {    
+    hspdif->pCsBuffPtr = pData;
+    hspdif->CsXferSize = Size;
+    hspdif->CsXferCount = Size;
+
+    /* Process Locked */
+    __HAL_LOCK(hspdif);
+    
+    hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
+    hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
+    
+    /* Set the SPDIFRX Rx DMA Half transfer complete callback */
+    hspdif->hdmaCsRx->XferHalfCpltCallback = SPDIFRX_DMACxHalfCplt;
+    
+    /* Set the SPDIFRX Rx DMA transfer complete callback */
+    hspdif->hdmaCsRx->XferCpltCallback = SPDIFRX_DMACxCplt;
+    
+    /* Set the DMA error callback */
+    hspdif->hdmaCsRx->XferErrorCallback = SPDIFRX_DMAError;
+       
+    /* Enable the DMA request */
+    HAL_DMA_Start_IT(hspdif->hdmaCsRx, (uint32_t)&hspdif->Instance->CSR, (uint32_t)hspdif->pCsBuffPtr, Size);
+
+    /* Enable CBDMAEN bit in SPDIFRX CR register for control flow reception*/
+    hspdif->Instance->CR |= SPDIFRX_CR_CBDMAEN;
+    
+        if (((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC) || ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00)) 
+        {
+        /* Start synchronization */
+        __HAL_SPDIFRX_SYNC(hspdif);
+        
+        /* Wait until SYNCD flag is set */
+      if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, SPDIFRX_TIMEOUT_VALUE) != HAL_OK)
+      { 
+        return HAL_TIMEOUT;
+      }  
+            
+        /* Start reception */    
+      __HAL_SPDIFRX_RCV(hspdif);
+        }
+        
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspdif);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief stop the audio stream receive from the Media.
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* Process Locked */
+  __HAL_LOCK(hspdif);
+  
+  /* Disable the SPDIFRX DMA requests */
+  hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
+  hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
+  
+  /* Disable the SPDIFRX DMA channel */
+  __HAL_DMA_DISABLE(hspdif->hdmaDrRx);
+  __HAL_DMA_DISABLE(hspdif->hdmaCsRx);
+  
+  /* Disable SPDIFRX peripheral */
+  __HAL_SPDIFRX_IDLE(hspdif);
+  
+  hspdif->State = HAL_SPDIFRX_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspdif);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles SPDIFRX interrupt request.
+  * @param  hspdif: SPDIFRX handle
+  * @retval HAL status
+  */
+void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif)
+{  
+  /* SPDIFRX in mode Data Flow Reception ------------------------------------------------*/
+  if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_RXNE) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_RXNE) != RESET))
+  {
+      __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_RXNE);
+    SPDIFRX_ReceiveDataFlow_IT(hspdif);
+  }
+  
+   /* SPDIFRX in mode Control Flow Reception ------------------------------------------------*/
+  if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_CSRNE) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_CSRNE) != RESET))
+  {
+        __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_CSRNE);
+    SPDIFRX_ReceiveControlFlow_IT(hspdif);
+  }
+    
+  /* SPDIFRX Overrun error interrupt occurred ---------------------------------*/
+  if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_OVR) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_OVRIE) != RESET))
+  {
+    __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_FLAG_OVR);
+    
+        /* Change the SPDIFRX error code */
+    hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_OVR;
+    
+        /* the transfer is not stopped */
+    HAL_SPDIFRX_ErrorCallback(hspdif);
+  } 
+    
+      /* SPDIFRX Parity error interrupt occurred ---------------------------------*/
+  if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_PERR) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_PERRIE) != RESET))
+  {
+    __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_FLAG_PERR);
+    
+        /* Change the SPDIFRX error code */
+    hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_PE;
+        
+        /* the transfer is not stopped */
+    HAL_SPDIFRX_ErrorCallback(hspdif);
+  } 
+  
+}
+
+/**
+  * @brief Rx Transfer (Data flow) half completed callbacks
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspdif);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief Rx Transfer (Data flow) completed callbacks
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspdif);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief Rx (Control flow) Transfer half completed callbacks
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspdif);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief Rx Transfer (Control flow) completed callbacks
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspdif);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
+  */
+}
+
+/**
+  * @brief SPDIFRX error callbacks
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+__weak void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspdif);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+  the HAL_SPDIFRX_ErrorCallback could be implemented in the user file
+  */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Exported_Functions_Group3 Peripheral State and Errors functions 
+  *  @brief   Peripheral State functions 
+  *
+@verbatim   
+===============================================================================
+##### Peripheral State and Errors functions #####
+===============================================================================  
+[..]
+This subsection permit to get in run-time the status of the peripheral 
+and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the SPDIFRX state
+  * @param  hspdif : SPDIFRX handle
+  * @retval HAL state
+  */
+HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif)
+{
+  return hspdif->State;
+}
+
+/**
+  * @brief  Return the SPDIFRX error code
+  * @param  hspdif : SPDIFRX handle
+  * @retval SPDIFRX Error Code
+  */
+uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif)
+{
+  return hspdif->ErrorCode;
+}
+
+/**
+  * @}
+  */  
+
+/**
+  * @brief DMA SPDIFRX receive process (Data flow) complete callback 
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma)
+{
+  SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* Disable Rx DMA Request */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
+    hspdif->RxXferCount = 0;
+    hspdif->State = HAL_SPDIFRX_STATE_READY; 
+  }
+  HAL_SPDIFRX_RxCpltCallback(hspdif); 
+}
+
+/**
+  * @brief DMA SPDIFRX receive process (Data flow) half complete callback 
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  
+  HAL_SPDIFRX_RxHalfCpltCallback(hspdif); 
+}
+
+
+/**
+  * @brief DMA SPDIFRX receive process (Control flow) complete callback 
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma)
+{
+  SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* Disable Cb DMA Request */
+  hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
+  hspdif->CsXferCount = 0;
+  
+  hspdif->State = HAL_SPDIFRX_STATE_READY; 
+  HAL_SPDIFRX_CxCpltCallback(hspdif); 
+}
+
+/**
+  * @brief DMA SPDIFRX receive process (Control flow) half complete callback 
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+  
+  HAL_SPDIFRX_CxHalfCpltCallback(hspdif); 
+}
+
+/**
+  * @brief DMA SPDIFRX communication error callback 
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma)
+{
+  SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* Disable Rx and Cb DMA Request */
+  hspdif->Instance->CR &= (uint16_t)(~(SPDIFRX_CR_RXDMAEN | SPDIFRX_CR_CBDMAEN));
+  hspdif->RxXferCount = 0;
+  
+  hspdif->State= HAL_SPDIFRX_STATE_READY;
+  
+  /* Set the error code and execute error callback*/
+  hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_DMA;
+  HAL_SPDIFRX_ErrorCallback(hspdif);
+}
+
+
+/**
+  * @brief Receive an amount of data (Data Flow) with Interrupt
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
+{
+    /* Receive data */
+    (*hspdif->pRxBuffPtr++) = hspdif->Instance->DR;
+    hspdif->RxXferCount--;
+
+    if(hspdif->RxXferCount == 0)
+    {            
+      /* Disable RXNE/PE and OVR interrupts */
+      __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE | SPDIFRX_IT_PERRIE | SPDIFRX_IT_RXNE);
+
+      hspdif->State = HAL_SPDIFRX_STATE_READY;
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hspdif);
+
+      HAL_SPDIFRX_RxCpltCallback(hspdif);
+    }
+}
+
+/**
+  * @brief Receive an amount of data (Control Flow) with Interrupt
+  * @param hspdif: SPDIFRX handle
+  * @retval None
+  */
+static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
+{
+    /* Receive data */
+    (*hspdif->pCsBuffPtr++) = hspdif->Instance->CSR;
+    hspdif->CsXferCount--;
+
+    if(hspdif->CsXferCount == 0)
+    {        
+      /* Disable CSRNE interrupt */
+      __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+
+       hspdif->State = HAL_SPDIFRX_STATE_READY; 
+
+      /* Process Unlocked */
+      __HAL_UNLOCK(hspdif);
+
+      HAL_SPDIFRX_CxCpltCallback(hspdif);
+    }
+}
+
+/**
+  * @brief This function handles SPDIFRX Communication Timeout.
+  * @param hspdif: SPDIFRX handle
+  * @param Flag: Flag checked
+  * @param Status: Value of the flag expected
+  * @param Timeout: Duration of the timeout
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Get tick */ 
+  tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+          hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hspdif);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
+                    __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
+          __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
+
+          hspdif->State= HAL_SPDIFRX_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(hspdif);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+* @}
+*/
+
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_spdifrx.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,556 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_spdifrx.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of SPDIFRX HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_SPDIFRX_H
+#define __STM32F7xx_HAL_SPDIFRX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"  
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SPDIFRX
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types
+  * @{
+  */
+
+/** 
+  * @brief SPDIFRX Init structure definition  
+  */
+typedef struct
+{
+  uint32_t InputSelection;           /*!< Specifies the SPDIF input selection.
+                                          This parameter can be a value of @ref SPDIFRX_Input_Selection */
+
+  uint32_t Retries;                  /*!< Specifies the Maximum allowed re-tries during synchronization phase.
+                                          This parameter can be a value of @ref SPDIFRX_Max_Retries */
+
+  uint32_t WaitForActivity;          /*!< Specifies the wait for activity on SPDIF selected input.
+                                          This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */
+
+  uint32_t ChannelSelection;         /*!< Specifies whether the control flow will take the channel status from channel A or B.
+                                          This parameter can be a value of @ref SPDIFRX_Channel_Selection */
+
+  uint32_t DataFormat;               /*!< Specifies the Data samples format (LSB, MSB, ...).
+                                          This parameter can be a value of @ref SPDIFRX_Data_Format */
+                                               
+  uint32_t StereoMode;               /*!< Specifies whether the peripheral is in stereo or mono mode.
+                                          This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
+
+    uint32_t PreambleTypeMask;          /*!< Specifies whether The preamble type bits are copied or not into the received frame.
+                                                                                   This parameter can be a value of @ref SPDIFRX_PT_Mask */
+
+    uint32_t ChannelStatusMask;        /*!< Specifies whether the channel status and user bits are copied or not into the received frame.
+                                                                                  This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */
+    
+    uint32_t ValidityBitMask;          /*!< Specifies whether the validity bit is copied or not into the received frame.
+                                                                                  This parameter can be a value of @ref SPDIFRX_V_Mask */                                                                                
+                                                                                
+    uint32_t ParityErrorMask;          /*!< Specifies whether the parity error bit is copied or not into the received frame.
+                                                                                  This parameter can be a value of @ref SPDIFRX_PE_Mask */
+    
+}SPDIFRX_InitTypeDef;
+
+/** 
+  * @brief SPDIFRX SetDataFormat structure definition  
+  */
+typedef struct
+{
+  uint32_t DataFormat;               /*!< Specifies the Data samples format (LSB, MSB, ...).
+                                          This parameter can be a value of @ref SPDIFRX_Data_Format */
+                                               
+  uint32_t StereoMode;               /*!< Specifies whether the peripheral is in stereo or mono mode.
+                                          This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
+
+  uint32_t PreambleTypeMask;          /*!< Specifies whether The preamble type bits are copied or not into the received frame.
+                                                                                   This parameter can be a value of @ref SPDIFRX_PT_Mask */
+
+  uint32_t ChannelStatusMask;        /*!< Specifies whether the channel status and user bits are copied or not into the received frame.
+                                                                                  This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */
+    
+  uint32_t ValidityBitMask;          /*!< Specifies whether the validity bit is copied or not into the received frame.
+                                                                                  This parameter can be a value of @ref SPDIFRX_V_Mask */                                                                                
+                                                                                
+  uint32_t ParityErrorMask;          /*!< Specifies whether the parity error bit is copied or not into the received frame.
+                                                                                  This parameter can be a value of @ref SPDIFRX_PE_Mask */
+    
+}SPDIFRX_SetDataFormatTypeDef;
+
+/** 
+  * @brief  HAL State structures definition  
+  */ 
+typedef enum
+{
+  HAL_SPDIFRX_STATE_RESET      = 0x00,  /*!< SPDIFRX not yet initialized or disabled                */
+  HAL_SPDIFRX_STATE_READY      = 0x01,  /*!< SPDIFRX initialized and ready for use                  */
+  HAL_SPDIFRX_STATE_BUSY       = 0x02,  /*!< SPDIFRX internal process is ongoing                    */ 
+  HAL_SPDIFRX_STATE_BUSY_RX    = 0x03,  /*!< SPDIFRX internal Data Flow RX process is ongoing       */  
+  HAL_SPDIFRX_STATE_BUSY_CX    = 0x04,  /*!< SPDIFRX internal Control Flow RX process is ongoing    */    
+  HAL_SPDIFRX_STATE_ERROR      = 0x07   /*!< SPDIFRX error state                                    */      
+}HAL_SPDIFRX_StateTypeDef;
+
+/** 
+  * @brief SPDIFRX handle Structure definition  
+  */
+typedef struct
+{
+  SPDIFRX_TypeDef            *Instance;    /* SPDIFRX registers base address */
+
+  SPDIFRX_InitTypeDef        Init;         /* SPDIFRX communication parameters */
+                            
+  uint32_t                   *pRxBuffPtr;  /* Pointer to SPDIFRX Rx transfer buffer */
+    
+    uint32_t                   *pCsBuffPtr;  /* Pointer to SPDIFRX Cx transfer buffer */
+  
+  __IO uint16_t              RxXferSize;   /* SPDIFRX Rx transfer size */
+  
+  __IO uint16_t              RxXferCount;  /* SPDIFRX Rx transfer counter 
+                                              (This field is initialized at the 
+                                               same value as transfer size at the 
+                                               beginning of the transfer and 
+                                               decremented when a sample is received. 
+                                               NbSamplesReceived = RxBufferSize-RxBufferCount) */
+    
+  __IO uint16_t              CsXferSize;   /* SPDIFRX Rx transfer size */
+  
+  __IO uint16_t              CsXferCount;  /* SPDIFRX Rx transfer counter 
+                                              (This field is initialized at the 
+                                               same value as transfer size at the 
+                                               beginning of the transfer and 
+                                               decremented when a sample is received. 
+                                               NbSamplesReceived = RxBufferSize-RxBufferCount) */
+                                                                                             
+  DMA_HandleTypeDef          *hdmaCsRx;    /* SPDIFRX EC60958_channel_status and user_information DMA handle parameters */
+
+  DMA_HandleTypeDef          *hdmaDrRx;    /* SPDIFRX Rx DMA handle parameters */
+  
+  __IO HAL_LockTypeDef       Lock;         /* SPDIFRX locking object */
+  
+  __IO HAL_SPDIFRX_StateTypeDef  State;    /* SPDIFRX communication state */
+
+  __IO uint32_t  ErrorCode;                /* SPDIFRX Error code                 */
+
+}SPDIFRX_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants
+  * @{
+  */
+/** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code
+  * @{
+  */ 
+#define HAL_SPDIFRX_ERROR_NONE      ((uint32_t)0x00000000)  /*!< No error           */
+#define HAL_SPDIFRX_ERROR_TIMEOUT   ((uint32_t)0x00000001)  /*!< Timeout error      */  
+#define HAL_SPDIFRX_ERROR_OVR       ((uint32_t)0x00000002)  /*!< OVR error          */
+#define HAL_SPDIFRX_ERROR_PE        ((uint32_t)0x00000004)  /*!< Parity error       */
+#define HAL_SPDIFRX_ERROR_DMA       ((uint32_t)0x00000008)  /*!< DMA transfer error */
+#define HAL_SPDIFRX_ERROR_UNKNOWN   ((uint32_t)0x00000010)  /*!< Unknown Error error */  
+/**
+  * @}
+  */
+  
+/** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection
+  * @{
+  */
+#define SPDIFRX_INPUT_IN0               ((uint32_t)0x00000000)
+#define SPDIFRX_INPUT_IN1               ((uint32_t)0x00010000)  
+#define SPDIFRX_INPUT_IN2               ((uint32_t)0x00020000)
+#define SPDIFRX_INPUT_IN3               ((uint32_t)0x00030000)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries
+  * @{
+  */
+#define SPDIFRX_MAXRETRIES_NONE            ((uint32_t)0x00000000)
+#define SPDIFRX_MAXRETRIES_3               ((uint32_t)0x00001000)  
+#define SPDIFRX_MAXRETRIES_15              ((uint32_t)0x00002000)
+#define SPDIFRX_MAXRETRIES_63              ((uint32_t)0x00003000)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity
+  * @{
+  */
+#define SPDIFRX_WAITFORACTIVITY_OFF                   ((uint32_t)0x00000000)
+#define SPDIFRX_WAITFORACTIVITY_ON                    ((uint32_t)SPDIFRX_CR_WFA)
+/**
+  * @}
+  */
+    
+/** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask
+* @{
+*/
+#define SPDIFRX_PREAMBLETYPEMASK_OFF                   ((uint32_t)0x00000000)
+#define SPDIFRX_PREAMBLETYPEMASK_ON                    ((uint32_t)SPDIFRX_CR_PTMSK)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_ChannelStatus_Mask  SPDIFRX Channel Status Mask
+* @{
+*/
+#define SPDIFRX_CHANNELSTATUS_OFF                 ((uint32_t)0x00000000)        /* The channel status and user bits are copied into the SPDIF_DR */
+#define SPDIFRX_CHANNELSTATUS_ON                  ((uint32_t)SPDIFRX_CR_CUMSK)  /* The channel status and user bits are not copied into the SPDIF_DR, zeros are written instead*/
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask
+* @{
+*/
+#define SPDIFRX_VALIDITYMASK_OFF                   ((uint32_t)0x00000000)
+#define SPDIFRX_VALIDITYMASK_ON                    ((uint32_t)SPDIFRX_CR_VMSK)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_PE_Mask  SPDIFRX Parity Error Mask
+* @{
+*/
+#define SPDIFRX_PARITYERRORMASK_OFF                   ((uint32_t)0x00000000)
+#define SPDIFRX_PARITYERRORMASK_ON                    ((uint32_t)SPDIFRX_CR_PMSK)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Channel_Selection  SPDIFRX Channel Selection
+  * @{
+  */
+#define SPDIFRX_CHANNEL_A      ((uint32_t)0x00000000)
+#define SPDIFRX_CHANNEL_B      ((uint32_t)SPDIFRX_CR_CHSEL)
+/**
+  * @}
+  */
+
+/** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format
+  * @{
+  */
+#define SPDIFRX_DATAFORMAT_LSB                   ((uint32_t)0x00000000)
+#define SPDIFRX_DATAFORMAT_MSB                   ((uint32_t)0x00000010)
+#define SPDIFRX_DATAFORMAT_32BITS                ((uint32_t)0x00000020)
+/**
+  * @}
+  */ 
+
+/** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode
+  * @{
+  */
+#define SPDIFRX_STEREOMODE_DISABLE           ((uint32_t)0x00000000)
+#define SPDIFRX_STEREOMODE_ENABLE           ((uint32_t)SPDIFRX_CR_RXSTEO)
+/**
+  * @}
+  */ 
+
+/** @defgroup SPDIFRX_State SPDIFRX State
+  * @{
+  */
+
+#define SPDIFRX_STATE_IDLE    ((uint32_t)0xFFFFFFFC)
+#define SPDIFRX_STATE_SYNC    ((uint32_t)0x00000001)
+#define SPDIFRX_STATE_RCV     ((uint32_t)SPDIFRX_CR_SPDIFEN)
+/**
+  * @}
+  */
+    
+/** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition
+  * @{
+  */
+#define SPDIFRX_IT_RXNE                       ((uint32_t)SPDIFRX_IMR_RXNEIE)
+#define SPDIFRX_IT_CSRNE                      ((uint32_t)SPDIFRX_IMR_CSRNEIE)
+#define SPDIFRX_IT_PERRIE                     ((uint32_t)SPDIFRX_IMR_PERRIE)
+#define SPDIFRX_IT_OVRIE                      ((uint32_t)SPDIFRX_IMR_OVRIE)
+#define SPDIFRX_IT_SBLKIE                     ((uint32_t)SPDIFRX_IMR_SBLKIE)
+#define SPDIFRX_IT_SYNCDIE                    ((uint32_t)SPDIFRX_IMR_SYNCDIE)
+#define SPDIFRX_IT_IFEIE                      ((uint32_t)SPDIFRX_IMR_IFEIE )
+/**
+  * @}
+  */
+    
+/** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition
+  * @{
+  */
+#define SPDIFRX_FLAG_RXNE                   ((uint32_t)SPDIFRX_SR_RXNE)
+#define SPDIFRX_FLAG_CSRNE                  ((uint32_t)SPDIFRX_SR_CSRNE)
+#define SPDIFRX_FLAG_PERR                   ((uint32_t)SPDIFRX_SR_PERR)
+#define SPDIFRX_FLAG_OVR                    ((uint32_t)SPDIFRX_SR_OVR)
+#define SPDIFRX_FLAG_SBD                    ((uint32_t)SPDIFRX_SR_SBD)
+#define SPDIFRX_FLAG_SYNCD                  ((uint32_t)SPDIFRX_SR_SYNCD)
+#define SPDIFRX_FLAG_FERR                   ((uint32_t)SPDIFRX_SR_FERR)
+#define SPDIFRX_FLAG_SERR                   ((uint32_t)SPDIFRX_SR_SERR)
+#define SPDIFRX_FLAG_TERR                   ((uint32_t)SPDIFRX_SR_TERR)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+  
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros
+  * @{
+  */
+
+/** @brief  Reset SPDIFRX handle state
+  * @param  __HANDLE__: SPDIFRX handle.
+  * @retval None
+  */
+#define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = (uint16_t)SPDIFRX_CR_SPDIFEN)
+
+/** @brief  Disable the specified SPDIFRX peripheral (IDLE State).
+  * @param  __HANDLE__: specifies the SPDIFRX Handle. 
+  * @retval None
+  */
+#define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE)
+
+/** @brief  Enable the specified SPDIFRX peripheral (SYNC State).
+  * @param  __HANDLE__: specifies the SPDIFRX Handle. 
+  * @retval None
+  */
+#define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC)
+
+
+/** @brief  Enable the specified SPDIFRX peripheral (RCV State).
+  * @param  __HANDLE__: specifies the SPDIFRX Handle. 
+  * @retval None
+  */
+#define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV)
+
+
+/** @brief  Enable or disable the specified SPDIFRX interrupts.
+  * @param  __HANDLE__: specifies the SPDIFRX Handle.
+  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
+  *        This parameter can be one of the following values:
+  *            @arg SPDIFRX_IT_RXNE
+  *            @arg SPDIFRX_IT_CSRNE
+  *            @arg SPDIFRX_IT_PERRIE
+  *            @arg SPDIFRX_IT_OVRIE
+  *            @arg SPDIFRX_IT_SBLKIE
+  *            @arg SPDIFRX_IT_SYNCDIE
+  *            @arg SPDIFRX_IT_IFEIE
+  * @retval None
+  */  
+#define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (uint16_t)(~(__INTERRUPT__)))
+ 
+/** @brief  Checks if the specified SPDIFRX interrupt source is enabled or disabled.
+  * @param  __HANDLE__: specifies the SPDIFRX Handle.
+  * @param  __INTERRUPT__: specifies the SPDIFRX interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg SPDIFRX_IT_RXNE
+  *            @arg SPDIFRX_IT_CSRNE
+  *            @arg SPDIFRX_IT_PERRIE
+  *            @arg SPDIFRX_IT_OVRIE
+  *            @arg SPDIFRX_IT_SBLKIE
+  *            @arg SPDIFRX_IT_SYNCDIE
+  *            @arg SPDIFRX_IT_IFEIE
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks whether the specified SPDIFRX flag is set or not.
+  * @param  __HANDLE__: specifies the SPDIFRX Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg SPDIFRX_FLAG_RXNE
+  *            @arg SPDIFRX_FLAG_CSRNE
+  *            @arg SPDIFRX_FLAG_PERR
+  *            @arg SPDIFRX_FLAG_OVR
+  *            @arg SPDIFRX_FLAG_SBD
+  *            @arg SPDIFRX_FLAG_SYNCD 
+  *            @arg SPDIFRX_FLAG_FERR 
+  *            @arg SPDIFRX_FLAG_SERR 
+  *            @arg SPDIFRX_FLAG_TERR 
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+  *                       to clear the corresponding interrupt
+  *          This parameter can be one of the following values:
+  *            @arg SPDIFRX_FLAG_PERR
+  *            @arg SPDIFRX_FLAG_OVR
+  *            @arg SPDIFRX_SR_SBD
+  *            @arg SPDIFRX_SR_SYNCD
+  * @retval None
+  */
+#define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__)) 
+  
+/**
+  * @}
+  */
+  
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPDIFRX_Exported_Functions
+  * @{
+  */
+                                                
+/** @addtogroup SPDIFRX_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif);
+HAL_StatusTypeDef HAL_SPDIFRX_DeInit (SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif);
+HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef  sDataFormat);
+/**
+  * @}
+  */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions  ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+/**
+  * @}
+  */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral Control and State functions  ************************************/
+HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif);
+uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros
+  * @{
+  */
+#define IS_SPDIFRX_INPUT_SELECT(INPUT)  (((INPUT) == SPDIFRX_INPUT_IN1) || \
+                                         ((INPUT) == SPDIFRX_INPUT_IN2) || \
+                                         ((INPUT) == SPDIFRX_INPUT_IN3)  || \
+                                         ((INPUT) == SPDIFRX_INPUT_IN0))
+#define IS_SPDIFRX_MAX_RETRIES(RET)   (((RET) == SPDIFRX_MAXRETRIES_NONE) || \
+                                      ((RET) == SPDIFRX_MAXRETRIES_3)  || \
+                                      ((RET) == SPDIFRX_MAXRETRIES_15) || \
+                                      ((RET) == SPDIFRX_MAXRETRIES_63))
+#define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL)    (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \
+                                               ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF))
+#define IS_PREAMBLE_TYPE_MASK(VAL)           (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \
+                                             ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF))
+#define IS_VALIDITY_MASK(VAL)               (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \
+                                             ((VAL) == SPDIFRX_VALIDITYMASK_ON))
+#define IS_PARITY_ERROR_MASK(VAL)            (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \
+                                             ((VAL) == SPDIFRX_PARITYERRORMASK_ON))
+#define IS_SPDIFRX_CHANNEL(CHANNEL)   (((CHANNEL) == SPDIFRX_CHANNEL_A) || \
+                                       ((CHANNEL) == SPDIFRX_CHANNEL_B))
+#define IS_SPDIFRX_DATA_FORMAT(FORMAT)           (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \
+                                                 ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \
+                                                 ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS))
+#define IS_STEREO_MODE(MODE)                 (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \
+                                             ((MODE) == SPDIFRX_STEREOMODE_ENABLE))
+                                             
+#define IS_CHANNEL_STATUS_MASK(VAL)          (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \
+                                              ((VAL) == SPDIFRX_CHANNELSTATUS_OFF))
+/**                                                                                    
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions
+  * @{
+  */
+/**
+  * @}
+  */
+ 
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+    
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_HAL_SPDIFRX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_spi.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,2755 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_spi.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   SPI HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Serial Peripheral Interface (SPI) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State functions
+  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      The SPI HAL driver can be used as follows:
+
+      (#) Declare a SPI_HandleTypeDef handle structure, for example:
+          SPI_HandleTypeDef  hspi;
+
+      (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit ()API:
+          (##) Enable the SPIx interface clock
+          (##) SPI pins configuration
+              (+++) Enable the clock for the SPI GPIOs
+              (+++) Configure these SPI pins as alternate function push-pull
+          (##) NVIC configuration if you need to use interrupt process
+              (+++) Configure the SPIx interrupt priority
+              (+++) Enable the NVIC SPI IRQ handle
+          (##) DMA Configuration if you need to use DMA process
+              (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel
+              (+++) Enable the DMAx clock
+              (+++) Configure the DMA handle parameters
+              (+++) Configure the DMA Tx or Rx channel
+              (+++) Associate the initialized hdma_tx handle to the hspi DMA Tx or Rx handle
+              (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx channel
+
+      (#) Program the Mode, BidirectionalMode , Data size, Baudrate Prescaler, NSS
+          management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure.
+
+      (#) Initialize the SPI registers by calling the HAL_SPI_Init() API:
+          (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
+              by calling the customised HAL_SPI_MspInit() API.
+     [..]
+       Circular mode restriction:
+      (#) The DMA circular mode cannot be used when the SPI is configured in these modes:
+          (##) Master 2Lines RxOnly
+          (##) Master 1Line Rx
+      (#) The CRC feature is not managed when the DMA circular mode is enabled
+      (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs
+          the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+    
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+   
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SPI SPI 
+  * @brief SPI HAL module driver
+  * @{
+  */
+#ifdef HAL_SPI_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup SPI_Private_Constants SPI Private Constants
+  * @{
+  */
+#define SPI_DEFAULT_TIMEOUT 50
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup SPI_Private_Functions
+  * @{
+  */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, uint32_t State, uint32_t Timeout);
+static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, uint32_t Timeout);
+static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi);
+static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi);
+static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi);
+static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi);
+static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout);
+static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup SPI_Exported_Functions SPI Exported Functions
+  * @{
+  */
+
+/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions
+ *
+@verbatim
+ ===============================================================================
+              ##### Initialization and de-initialization functions #####
+ ===============================================================================
+    [..]  This subsection provides a set of functions allowing to initialize and
+          de-initialize the SPIx peripheral:
+
+      (+) User must implement HAL_SPI_MspInit() function in which he configures
+          all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
+
+      (+) Call the function HAL_SPI_Init() to configure the selected device with
+          the selected configuration:
+        (++) Mode
+        (++) Direction
+        (++) Data Size
+        (++) Clock Polarity and Phase
+        (++) NSS Management
+        (++) BaudRate Prescaler
+        (++) FirstBit
+        (++) TIMode
+        (++) CRC Calculation
+        (++) CRC Polynomial if CRC enabled
+        (++) CRC Length, used only with Data8 and Data16
+        (++) FIFO reception threshold
+
+      (+) Call the function HAL_SPI_DeInit() to restore the default configuration
+          of the selected SPIx peripheral.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the SPI according to the specified parameters
+  *         in the SPI_InitTypeDef and create the associated handle.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi)
+{
+  uint32_t frxth;
+
+  /* Check the SPI handle allocation */
+  if(hspi == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
+  assert_param(IS_SPI_MODE(hspi->Init.Mode));
+  assert_param(IS_SPI_DIRECTION(hspi->Init.Direction));
+  assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize));
+  assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity));
+  assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase));
+  assert_param(IS_SPI_NSS(hspi->Init.NSS));
+  assert_param(IS_SPI_NSSP(hspi->Init.NSSPMode));
+  assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
+  assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit));
+  assert_param(IS_SPI_TIMODE(hspi->Init.TIMode));
+  assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation));
+  assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial));
+  assert_param(IS_SPI_CRC_LENGTH(hspi->Init.CRCLength));
+
+  if(hspi->State == HAL_SPI_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hspi->Lock = HAL_UNLOCKED;
+
+    /* Init the low level hardware : GPIO, CLOCK, NVIC... */
+    HAL_SPI_MspInit(hspi);
+  }
+
+  hspi->State = HAL_SPI_STATE_BUSY;
+
+  /* Disable the selected SPI peripheral */
+  __HAL_SPI_DISABLE(hspi);
+
+  /* Align by default the rs fifo threshold on the data size */
+  if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    frxth = SPI_RXFIFO_THRESHOLD_HF;
+  }
+  else
+  {
+    frxth = SPI_RXFIFO_THRESHOLD_QF;
+  }
+
+  /* CRC calculation is valid only for 16Bit and 8 Bit */
+  if(( hspi->Init.DataSize != SPI_DATASIZE_16BIT ) && ( hspi->Init.DataSize != SPI_DATASIZE_8BIT ))
+  {
+    /* CRC must be disabled */
+    hspi->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+  }
+
+  /* Align the CRC Length on the data size */
+  if( hspi->Init.CRCLength == SPI_CRC_LENGTH_DATASIZE)
+  {
+    /* CRC Length aligned on the data size : value set by default */
+    if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+    {
+      hspi->Init.CRCLength = SPI_CRC_LENGTH_16BIT;
+    }
+    else
+    {
+      hspi->Init.CRCLength = SPI_CRC_LENGTH_8BIT;
+    }
+  }
+
+  /*---------------------------- SPIx CR1 & CR2 Configuration ------------------------*/
+  /* Configure : SPI Mode, Communication Mode, Clock polarity and phase, NSS management,
+  Communication speed, First bit, CRC calculation state, CRC Length */
+  hspi->Instance->CR1 = (hspi->Init.Mode | hspi->Init.Direction |
+                         hspi->Init.CLKPolarity | hspi->Init.CLKPhase | (hspi->Init.NSS & SPI_CR1_SSM) |
+                         hspi->Init.BaudRatePrescaler | hspi->Init.FirstBit  | hspi->Init.CRCCalculation);
+
+  if( hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
+  {
+    hspi->Instance->CR1|= SPI_CR1_CRCL;
+  }
+
+  /* Configure : NSS management */
+  /* Configure : Rx Fifo Threshold */
+  hspi->Instance->CR2 = (((hspi->Init.NSS >> 16) & SPI_CR2_SSOE) | hspi->Init.TIMode | hspi->Init.NSSPMode |
+                         hspi->Init.DataSize ) | frxth;
+
+  /*---------------------------- SPIx CRCPOLY Configuration --------------------*/
+  /* Configure : CRC Polynomial */
+  hspi->Instance->CRCPR = hspi->Init.CRCPolynomial;
+
+  hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+  hspi->State= HAL_SPI_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the SPI peripheral
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi)
+{
+  /* Check the SPI handle allocation */
+  if(hspi == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_INSTANCE(hspi->Instance));
+
+  hspi->State = HAL_SPI_STATE_BUSY;
+
+  /* check flag before the SPI disable */
+  SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FTLVL, SPI_FTLVL_EMPTY, SPI_DEFAULT_TIMEOUT);
+  SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, SPI_DEFAULT_TIMEOUT);
+  SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, SPI_DEFAULT_TIMEOUT);
+
+  /* Disable the SPI Peripheral Clock */
+  __HAL_SPI_DISABLE(hspi);
+
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
+  HAL_SPI_MspDeInit(hspi);
+
+  hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+  hspi->State = HAL_SPI_STATE_RESET;
+
+  __HAL_UNLOCK(hspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief SPI MSP Init
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+ __weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi)
+ {
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+ 
+   /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_MspInit should be implemented in the user file
+   */
+}
+
+/**
+  * @brief SPI MSP DeInit
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+ __weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_MspDeInit should be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Exported_Functions_Group2 IO operation functions
+ *  @brief   Data transfers functions
+ *
+@verbatim
+  ==============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    This subsection provides a set of functions allowing to manage the SPI
+    data transfers.
+
+    [..] The SPI supports master and slave mode :
+
+    (#) There are two modes of transfer:
+       (++) Blocking mode: The communication is performed in polling mode.
+            The HAL status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode: The communication is performed using Interrupts
+           or DMA, These APIs return the HAL status.
+           The end of the data processing will be indicated through the
+           dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when
+           using DMA mode.
+           The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks
+           will be executed respectively at the end of the transmit or Receive process
+           The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected
+
+    (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA)
+        exist for 1Line (simplex) and 2Lines (full duplex) modes.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Transmit an amount of data in blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  if(hspi->State != HAL_SPI_STATE_READY)
+  {
+    hspi->State = HAL_SPI_STATE_READY;
+   /* Process Unlocked */
+   __HAL_UNLOCK(hspi);
+   return HAL_BUSY;
+  }
+  
+  if((pData == NULL ) || (Size == 0))
+  {
+    hspi->State = HAL_SPI_STATE_READY;
+   /* Process Unlocked */
+   __HAL_UNLOCK(hspi);
+    return HAL_ERROR;
+  }
+
+  /* Set the transaction information */
+  hspi->State       = HAL_SPI_STATE_BUSY_TX;
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pTxBuffPtr  = pData;
+  hspi->TxXferSize  = Size;
+  hspi->TxXferCount = Size;
+  hspi->pRxBuffPtr  = (uint8_t *)NULL;
+  hspi->RxXferSize  = 0;
+  hspi->RxXferCount = 0;
+
+  /* Configure communication direction : 1Line */
+  if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+  {
+    SPI_1LINE_TX(hspi);
+  }
+
+  /* Reset CRC Calculation */
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SPI_RESET_CRC(hspi);
+  }
+
+  /* Check if the SPI is already enabled */
+  if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */
+    __HAL_SPI_ENABLE(hspi);
+  }
+
+  /* Transmit data in 16 Bit mode */
+  if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    /* Transmit data in 16 Bit mode */
+    while (hspi->TxXferCount > 0)
+    {
+      /* Wait until TXE flag is set to send data */
+      if(SPI_WaitFlagStateUntilTimeout(hspi,SPI_FLAG_TXE,SPI_FLAG_TXE,Timeout) != HAL_OK)
+      {
+        hspi->State = HAL_SPI_STATE_READY;
+        /* Process Unlocked */
+       __HAL_UNLOCK(hspi);
+        return HAL_TIMEOUT;
+      }
+      hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+      hspi->pTxBuffPtr += sizeof(uint16_t);
+      hspi->TxXferCount--;
+    }
+  }
+  /* Transmit data in 8 Bit mode */
+  else
+  {
+    while (hspi->TxXferCount > 0)
+    {
+      if(hspi->TxXferCount != 0x1)
+      {
+        /* Wait until TXE flag is set to send data */
+        if(SPI_WaitFlagStateUntilTimeout(hspi,SPI_FLAG_TXE,SPI_FLAG_TXE,Timeout) != HAL_OK)
+        {
+          hspi->State = HAL_SPI_STATE_READY;
+          /* Process Unlocked */
+          __HAL_UNLOCK(hspi);
+          return HAL_TIMEOUT;
+        }
+        hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+        hspi->pTxBuffPtr += sizeof(uint16_t);
+        hspi->TxXferCount -= 2;
+      }
+      else
+      {
+        /* Wait until TXE flag is set to send data */
+        if(SPI_WaitFlagStateUntilTimeout(hspi,SPI_FLAG_TXE,SPI_FLAG_TXE,Timeout) != HAL_OK)  
+        {
+          return HAL_TIMEOUT;
+        }
+        *((__IO uint8_t*)&hspi->Instance->DR) = (*hspi->pTxBuffPtr++);
+        hspi->TxXferCount--;    
+      }
+    }
+  }
+
+  /* Enable CRC Transmission */
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+     hspi->Instance->CR1|= SPI_CR1_CRCNEXT;
+  }
+
+  /* Check the end of the transaction */
+  if(SPI_EndRxTxTransaction(hspi,Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Clear OVERUN flag in 2 Lines communication mode because received is not read */
+  if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+  {
+    __HAL_SPI_CLEAR_OVRFLAG(hspi);
+  }
+    
+  hspi->State = HAL_SPI_STATE_READY; 
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+  
+  if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+  {   
+    return HAL_ERROR;
+  }
+  else
+  {
+    return HAL_OK;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be received
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  __IO uint16_t tmpreg;
+  
+  if(hspi->State != HAL_SPI_STATE_READY)
+  {
+    return HAL_BUSY;
+  }
+  
+  if((pData == NULL ) || (Size == 0))
+  {
+    return HAL_ERROR;
+  }
+
+  if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
+  {
+    /* the receive process is not supported in 2Lines direction master mode */
+    /* in this case we call the transmitReceive process                     */
+    return HAL_SPI_TransmitReceive(hspi,pData,pData,Size,Timeout);
+  }
+  
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+    
+  hspi->State       = HAL_SPI_STATE_BUSY_RX;
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pRxBuffPtr  = pData;
+  hspi->RxXferSize  = Size;
+  hspi->RxXferCount = Size;
+  hspi->pTxBuffPtr  = (uint8_t *)NULL;
+  hspi->TxXferSize  = 0;
+  hspi->TxXferCount = 0;
+
+  /* Reset CRC Calculation */
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SPI_RESET_CRC(hspi);
+    /* this is done to handle the CRCNEXT before the latest data */
+    hspi->RxXferCount--;
+  }
+
+  /* Set the Rx Fido threshold */
+  if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    /* set fiforxthreshold according the reception data length: 16bit */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+  else
+  {
+    /* set fiforxthreshold according the reception data length: 8bit */
+    SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+
+  /* Configure communication direction 1Line and enabled SPI if needed */
+  if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+  {
+    SPI_1LINE_RX(hspi);
+  }
+
+  /* Check if the SPI is already enabled */
+  if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */
+    __HAL_SPI_ENABLE(hspi);
+  }
+
+  /* Receive data in 8 Bit mode */
+  if(hspi->Init.DataSize <= SPI_DATASIZE_8BIT)
+  {
+    while(hspi->RxXferCount > 1)
+    {
+      /* Wait until the RXNE flag */
+      if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      (*hspi->pRxBuffPtr++)= *(__IO uint8_t *)&hspi->Instance->DR;
+      hspi->RxXferCount--;  
+    }
+  }
+  else /* Receive data in 16 Bit mode */
+  {   
+    while(hspi->RxXferCount > 1 )
+    {
+      /* Wait until RXNE flag is reset to read data */
+      if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+      hspi->pRxBuffPtr += sizeof(uint16_t);
+      hspi->RxXferCount--;
+    } 
+  }
+  
+  /* Enable CRC Transmission */
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) 
+  {
+    hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+  }  
+
+  /* Wait until RXNE flag is set */
+  if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+  
+  /* Receive last data in 16 Bit mode */
+  if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {        
+    *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+    hspi->pRxBuffPtr += sizeof(uint16_t);
+  }
+  /* Receive last data in 8 Bit mode */
+  else 
+  {
+    (*hspi->pRxBuffPtr++) = *(__IO uint8_t *)&hspi->Instance->DR;
+  }
+  hspi->RxXferCount--;
+  
+  /* Read CRC from DR to close CRC calculation process */
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    /* Wait until TXE flag */
+    if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, Timeout) != HAL_OK) 
+    {
+      /* Error on the CRC reception */
+      hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+    }
+    if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+    {        
+      tmpreg = hspi->Instance->DR;
+      UNUSED(tmpreg); /* To avoid GCC warning */
+    }
+    else
+    {
+      tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+      UNUSED(tmpreg); /* To avoid GCC warning */
+
+      if((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT))
+      {
+        if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, Timeout) != HAL_OK)
+        {
+          /* Error on the CRC reception */
+          hspi->ErrorCode|= HAL_SPI_ERROR_FLAG;
+        }
+        tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+        UNUSED(tmpreg); /* To avoid GCC warning */
+      }
+    }
+  }
+  
+  /* Check the end of the transaction */
+  if(SPI_EndRxTransaction(hspi,Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  hspi->State = HAL_SPI_STATE_READY; 
+    
+  /* Check if CRC error occurred */
+  if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+  {
+    hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+    __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+                  
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+    return HAL_ERROR;
+  }
+    
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+  
+  if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+  {   
+    return HAL_ERROR;
+  }
+  else
+  {
+    return HAL_OK;
+  }
+}
+
+/**
+  * @brief  Transmit and Receive an amount of data in blocking mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pTxData: pointer to transmission data buffer
+  * @param  pRxData: pointer to reception data buffer
+  * @param  Size: amount of data to be sent and received
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+  __IO uint16_t tmpreg = 0;
+  uint32_t tickstart = HAL_GetTick();
+  
+  assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+  
+  if(hspi->State != HAL_SPI_STATE_READY) 
+  {
+    return HAL_BUSY;
+  }
+  
+  if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
+  {
+    return HAL_ERROR;
+  }
+
+  
+  /* Process Locked */
+  __HAL_LOCK(hspi); 
+  
+  hspi->State       = HAL_SPI_STATE_BUSY_TX_RX;
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pRxBuffPtr  = pRxData;
+  hspi->RxXferCount = Size;
+  hspi->RxXferSize  = Size;
+  hspi->pTxBuffPtr  = pTxData;
+  hspi->TxXferCount = Size;
+  hspi->TxXferSize  = Size;
+
+  /* Reset CRC Calculation */
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SPI_RESET_CRC(hspi);
+  }
+
+  /* Set the Rx Fido threshold */
+  if((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (hspi->RxXferCount > 1))
+  {
+    /* set fiforxthreshold according the reception data length: 16bit */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+  else
+  {
+    /* set fiforxthreshold according the reception data length: 8bit */
+    SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+
+  /* Check if the SPI is already enabled */
+  if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */
+    __HAL_SPI_ENABLE(hspi);
+  }
+
+  /* Transmit and Receive data in 16 Bit mode */
+  if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    while ((hspi->TxXferCount > 0 ) || (hspi->RxXferCount > 0))
+    {
+      /* Check TXE flag */
+      if((hspi->TxXferCount > 0) && ((hspi->Instance->SR & SPI_FLAG_TXE) == SPI_FLAG_TXE))
+      {
+        hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+        hspi->pTxBuffPtr += sizeof(uint16_t);
+        hspi->TxXferCount--;
+
+        /* Enable CRC Transmission */
+        if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+        {
+          SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+        } 
+      }
+
+      /* Check RXNE flag */
+      if((hspi->RxXferCount > 0) && ((hspi->Instance->SR & SPI_FLAG_RXNE) == SPI_FLAG_RXNE))
+      {
+        *((uint16_t *)hspi->pRxBuffPtr) = hspi->Instance->DR;
+        hspi->pRxBuffPtr += sizeof(uint16_t);
+        hspi->RxXferCount--;
+      }
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0) || ((HAL_GetTick()-tickstart) > Timeout)) 
+        {
+          hspi->State = HAL_SPI_STATE_READY;
+          __HAL_UNLOCK(hspi);
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  /* Transmit and Receive data in 8 Bit mode */
+  else
+  {
+    while((hspi->TxXferCount > 0) || (hspi->RxXferCount > 0))
+    {
+      /* check TXE flag */
+      if((hspi->TxXferCount > 0) && ((hspi->Instance->SR & SPI_FLAG_TXE) == SPI_FLAG_TXE))
+      {
+        if(hspi->TxXferCount > 1)
+        {
+          hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
+          hspi->pTxBuffPtr += sizeof(uint16_t);
+          hspi->TxXferCount -= 2;
+        }
+        else
+        {
+          *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+          hspi->TxXferCount--;
+        }
+
+        /* Enable CRC Transmission */
+        if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+        {
+          SET_BIT(hspi->Instance->CR1, SPI_CR1_CRCNEXT);
+        }
+      }
+
+      /* Wait until RXNE flag is reset */
+      if((hspi->RxXferCount > 0) && ((hspi->Instance->SR & SPI_FLAG_RXNE) == SPI_FLAG_RXNE))
+      {
+        if(hspi->RxXferCount > 1)
+        {
+          *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+          hspi->pRxBuffPtr += sizeof(uint16_t);
+          hspi->RxXferCount -= 2;
+          if(hspi->RxXferCount <= 1)
+          {
+            /* set fiforxthreshold before to switch on 8 bit data size */
+            SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+          }
+        }
+        else
+        {
+          (*hspi->pRxBuffPtr++) =  *(__IO uint8_t *)&hspi->Instance->DR;
+          hspi->RxXferCount--;
+        }
+      }
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0) || ((HAL_GetTick()-tickstart) > Timeout))
+        {
+          hspi->State = HAL_SPI_STATE_READY;
+          __HAL_UNLOCK(hspi);
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+
+  /* Read CRC from DR to close CRC calculation process */
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    /* Wait until TXE flag */
+    if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, Timeout) != HAL_OK)
+    {
+      /* Error on the CRC reception */
+      hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+    }
+
+    if(hspi->Init.DataSize == SPI_DATASIZE_16BIT)
+    {
+      tmpreg = hspi->Instance->DR;
+      UNUSED(tmpreg); /* To avoid GCC warning */
+    }
+    else
+    {
+      tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+      UNUSED(tmpreg); /* To avoid GCC warning */
+
+      if(hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
+      {
+        if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, Timeout) != HAL_OK)
+        {
+          /* Error on the CRC reception */
+          hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+        }
+        tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+        UNUSED(tmpreg); /* To avoid GCC warning */
+      }
+    }
+  }
+
+  /* Check the end of the transaction */
+  if(SPI_EndRxTxTransaction(hspi,Timeout) != HAL_OK)
+  {
+    return HAL_TIMEOUT;
+  }
+
+  hspi->State = HAL_SPI_STATE_READY;
+  
+  /* Check if CRC error occurred */
+  if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+  {
+    hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+    /* Clear CRC Flag */
+    __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+    
+    return HAL_ERROR;
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+  
+  if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+  {   
+    return HAL_ERROR;
+  }
+  else
+  {
+    return HAL_OK;
+  }
+}
+
+/**
+  * @brief  Transmit an amount of data in no-blocking mode with Interrupt
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+  
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+    
+    hspi->State       = HAL_SPI_STATE_BUSY_TX;
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+    hspi->pTxBuffPtr  = pData;
+    hspi->TxXferSize  = Size;
+    hspi->TxXferCount = Size;
+    hspi->pRxBuffPtr  = NULL;
+    hspi->RxXferSize  = 0;
+    hspi->RxXferCount = 0;
+
+    /* Set the function for IT treatement */
+    if(hspi->Init.DataSize > SPI_DATASIZE_8BIT )
+    {
+      hspi->RxISR = NULL;
+      hspi->TxISR = SPI_TxISR_16BIT;
+    }
+    else
+    {
+      hspi->RxISR = NULL;
+      hspi->TxISR = SPI_TxISR_8BIT;
+    }
+    
+    /* Configure communication direction : 1Line */
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+      SPI_1LINE_TX(hspi);
+    }
+    
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);    
+    }
+    
+    /* Enable TXE and ERR interrupt */
+    __HAL_SPI_ENABLE_IT(hspi,(SPI_IT_TXE));
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+
+    /* Note : The SPI must be enabled after unlocking current process 
+              to avoid the risk of SPI interrupt handle execution before current
+              process unlock */
+        
+    /* Check if the SPI is already enabled */ 
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */    
+      __HAL_SPI_ENABLE(hspi);
+    }
+        
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Receive an amount of data in no-blocking mode with Interrupt
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  if(hspi->State == HAL_SPI_STATE_READY)
+  {
+    if((pData == NULL) || (Size == 0))
+    { 
+      return  HAL_ERROR;                      
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(hspi);
+    
+    /* Configure communication */
+    hspi->State       = HAL_SPI_STATE_BUSY_RX;
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+    hspi->pRxBuffPtr  = pData;
+    hspi->RxXferSize  = Size;
+    hspi->RxXferCount = Size;
+    hspi->pTxBuffPtr  = NULL;
+    hspi->TxXferSize  = 0;
+    hspi->TxXferCount = 0;
+
+    if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
+    {
+      /* Process Unlocked */
+      __HAL_UNLOCK(hspi);
+      /* the receive process is not supported in 2Lines direction master mode */
+      /* in this we call the transmitReceive process          */
+      return HAL_SPI_TransmitReceive_IT(hspi,pData,pData,Size);
+    }
+        
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      hspi->CRCSize = 1;
+      if((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT))
+      {
+        hspi->CRCSize = 2;
+      }
+    }
+    else
+    {
+      hspi->CRCSize = 0;
+    }
+        
+    /* check the data size to adapt Rx threshold and the set the function for IT treatment */
+    if(hspi->Init.DataSize > SPI_DATASIZE_8BIT )
+    {
+      /* set fiforxthreshold according the reception data length: 16 bit */
+      CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+      hspi->RxISR = SPI_RxISR_16BIT;
+      hspi->TxISR = NULL;
+    }
+    else
+    {
+      /* set fiforxthreshold according the reception data length: 8 bit */
+      SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+      hspi->RxISR = SPI_RxISR_8BIT;
+      hspi->TxISR = NULL;
+    }
+    
+    /* Configure communication direction : 1Line */
+    if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+    {
+      SPI_1LINE_RX(hspi);
+    }
+    
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+    
+    /* Enable TXE and ERR interrupt */
+    __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+    
+    /* Note : The SPI must be enabled after unlocking current process 
+    to avoid the risk of SPI interrupt handle execution before current
+    process unlock */
+    
+    /* Check if the SPI is already enabled */ 
+    if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */    
+      __HAL_SPI_ENABLE(hspi);
+    }
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief  Transmit and Receive an amount of data in no-blocking mode with Interrupt
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pTxData: pointer to transmission data buffer
+  * @param  pRxData: pointer to reception data buffer
+  * @param  Size: amount of data to be sent and received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+  assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+  
+  if((hspi->State == HAL_SPI_STATE_READY) || \
+     ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->State == HAL_SPI_STATE_BUSY_RX)))
+  {
+    if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    /* Process locked */
+    __HAL_LOCK(hspi);
+    
+    hspi->CRCSize = 0;
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      hspi->CRCSize = 1;
+      if((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT))
+      {
+        hspi->CRCSize = 2;
+      }
+    }
+    
+    if(hspi->State != HAL_SPI_STATE_BUSY_RX)
+    {
+      hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+    }
+    
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+    hspi->pTxBuffPtr  = pTxData;
+    hspi->TxXferSize  = Size;
+    hspi->TxXferCount = Size;
+    hspi->pRxBuffPtr  = pRxData;
+    hspi->RxXferSize  = Size;
+    hspi->RxXferCount = Size;
+    
+    /* Set the function for IT treatement */
+    if(hspi->Init.DataSize > SPI_DATASIZE_8BIT )
+    {
+      hspi->RxISR = SPI_2linesRxISR_16BIT;
+      hspi->TxISR = SPI_2linesTxISR_16BIT;       
+    }
+    else
+    {
+      hspi->RxISR = SPI_2linesRxISR_8BIT;
+      hspi->TxISR = SPI_2linesTxISR_8BIT;
+    }
+    
+    /* Reset CRC Calculation */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+    
+    /* check if packing mode is enabled and if there is more than 2 data to receive */
+    if((hspi->Init.DataSize > SPI_DATASIZE_8BIT) || (hspi->RxXferCount >= 2))
+    {
+      /* set fiforxthreshold according the reception data length: 16 bit */
+      CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+    }
+    else
+    {
+      /* set fiforxthreshold according the reception data length: 8 bit */
+      SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+    }
+    
+    /* Enable TXE, RXNE and ERR interrupt */
+    __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+    
+    /* Check if the SPI is already enabled */ 
+    if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */    
+      __HAL_SPI_ENABLE(hspi);
+    }
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Transmit an amount of data in no-blocking mode with DMA
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pData: pointer to data buffer
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{    
+  assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
+
+  if(hspi->State != HAL_SPI_STATE_READY) 
+  {
+    return HAL_BUSY;
+  }
+  
+  if((pData == NULL) || (Size == 0))
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+  
+  hspi->State       = HAL_SPI_STATE_BUSY_TX;
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pTxBuffPtr  = pData;
+  hspi->TxXferSize  = Size;
+  hspi->TxXferCount = Size;
+  hspi->pRxBuffPtr  = (uint8_t *)NULL;
+  hspi->RxXferSize  = 0;
+  hspi->RxXferCount = 0;
+  
+  /* Configure communication direction : 1Line */
+  if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+  {
+    SPI_1LINE_TX(hspi);
+  }
+  
+  /* Reset CRC Calculation */
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SPI_RESET_CRC(hspi);
+  }
+  
+  /* Set the SPI TxDMA Half transfer complete callback */
+  hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt;
+  
+  /* Set the SPI TxDMA transfer complete callback */
+  hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt;
+  
+  /* Set the DMA error callback */
+  hspi->hdmatx->XferErrorCallback = SPI_DMAError;
+  
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+  /* packing mode is enabled only if the DMA setting is HALWORD */
+  if((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD))
+  {
+    /* Check the even/odd of the data size + crc if enabled */
+    if((hspi->TxXferCount & 0x1) == 0)
+    {
+      CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+      hspi->TxXferCount = (hspi->TxXferCount >> 1);
+    }
+    else
+    {
+      SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+      hspi->TxXferCount = (hspi->TxXferCount >> 1) + 1;
+    }
+  }
+  
+  /* Enable the Tx DMA channel */
+  HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
+  
+  /* Check if the SPI is already enabled */ 
+  if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */    
+    __HAL_SPI_ENABLE(hspi);
+  }
+
+  /* Enable Tx DMA Request */
+  hspi->Instance->CR2 |= SPI_CR2_TXDMAEN;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+  
+  return HAL_OK;
+}
+
+/**
+* @brief  Receive an amount of data in no-blocking mode with DMA 
+* @param  hspi: SPI handle
+* @param  pData: pointer to data buffer
+* @param  Size: amount of data to be sent
+* @retval HAL status
+*/
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
+{
+  if(hspi->State != HAL_SPI_STATE_READY)
+  {
+    return HAL_BUSY;
+  }
+  
+  if((pData == NULL) || (Size == 0))
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  hspi->State       = HAL_SPI_STATE_BUSY_RX;
+  hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+  hspi->pRxBuffPtr  = pData;
+  hspi->RxXferSize  = Size;
+  hspi->RxXferCount = Size;
+  hspi->pTxBuffPtr  = (uint8_t *)NULL;
+  hspi->TxXferSize  = 0;
+  hspi->TxXferCount = 0;
+
+  if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
+  {
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+    /* the receive process is not supported in 2Lines direction master mode */
+    /* in this case we call the transmitReceive process                     */
+    return HAL_SPI_TransmitReceive_DMA(hspi,pData,pData,Size);
+  }
+  
+  /* Configure communication direction : 1Line */
+  if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
+  {
+    SPI_1LINE_RX(hspi);
+  }
+  
+  /* Reset CRC Calculation */
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    SPI_RESET_CRC(hspi);
+  }
+  
+  /* packing mode management is enabled by the DMA settings */
+  if((hspi->Init.DataSize <= SPI_DATASIZE_8BIT) && (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD))
+  {
+    /* Process Locked */
+    __HAL_UNLOCK(hspi);
+    /* Restriction the DMA data received is not allowed in this mode */
+    return HAL_ERROR;
+  }
+  
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+  if( hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+  {
+    /* set fiforxthreshold according the reception data length: 16bit */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+  else
+  {
+    /* set fiforxthreshold according the reception data length: 8bit */
+    SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+  }
+  
+  /* Set the SPI RxDMA Half transfer complete callback */
+  hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+
+  /* Set the SPI Rx DMA transfer complete callback */
+  hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+  
+  /* Set the DMA error callback */
+  hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+  
+  /* Enable Rx DMA Request */  
+  hspi->Instance->CR2 |= SPI_CR2_RXDMAEN;
+  
+  /* Enable the Rx DMA channel */
+  HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount);
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+  
+  /* Check if the SPI is already enabled */ 
+  if((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+  {
+    /* Enable SPI peripheral */    
+    __HAL_SPI_ENABLE(hspi);
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Transmit and Receive an amount of data in no-blocking mode with DMA
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param  pTxData: pointer to transmission data buffer
+  * @param  pRxData: pointer to reception data buffer
+  * @note  When the CRC feature is enabled the pRxData Length must be Size + 1
+  * @param  Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+  assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+  
+  if((hspi->State == HAL_SPI_STATE_READY) ||
+     ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->State == HAL_SPI_STATE_BUSY_RX)))
+  {
+    if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0)) 
+    {
+      return  HAL_ERROR;                                    
+    }
+    
+    /* Process locked */
+    __HAL_LOCK(hspi);
+    
+    /* check if the transmit Receive function is not called by a receive master */
+    if(hspi->State != HAL_SPI_STATE_BUSY_RX)
+    {  
+      hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+    }
+    
+    hspi->ErrorCode   = HAL_SPI_ERROR_NONE;
+    hspi->pTxBuffPtr  = (uint8_t *)pTxData;
+    hspi->TxXferSize  = Size;
+    hspi->TxXferCount = Size;
+    hspi->pRxBuffPtr  = (uint8_t *)pRxData;
+    hspi->RxXferSize  = Size;
+    hspi->RxXferCount = Size;
+    
+    /* Reset CRC Calculation + increase the rxsize */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SPI_RESET_CRC(hspi);
+    }
+    
+    /* Reset the threshold bit */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+    CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+    
+    /* the packing mode management is enabled by the DMA settings according the spi data size */
+    if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+    {
+      /* set fiforxthreshold according the reception data length: 16bit */
+      CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+    }
+    else
+    {
+      /* set fiforxthreshold according the reception data length: 8bit */
+      SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+      
+      if(hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
+      {
+        if((hspi->TxXferSize & 0x1) == 0x0 )
+        {
+          CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+          hspi->TxXferCount = hspi->TxXferCount >> 1;
+        }
+        else
+        {
+          SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+          hspi->TxXferCount = (hspi->TxXferCount >> 1) + 1;
+        }      
+      }
+      
+      if(hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
+      {
+        /* set fiforxthreshold according the reception data length: 16bit */
+        CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+        
+        /* Size must include the CRC length */
+        if((hspi->RxXferCount & 0x1) == 0x0 )
+        {
+          CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+          hspi->RxXferCount = hspi->RxXferCount >> 1;
+        }
+        else
+        {
+          SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+          hspi->RxXferCount = (hspi->RxXferCount >> 1) + 1; 
+        } 
+      }
+    }   
+    
+    /* Set the SPI Rx DMA transfer complete callback because the last generated transfer request is 
+    the reception request (RXNE) */
+    if(hspi->State == HAL_SPI_STATE_BUSY_RX)
+    {			
+      hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
+      hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+    }
+    else
+    {	
+       hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt;
+      hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt;
+    }
+    /* Set the DMA error callback */
+    hspi->hdmarx->XferErrorCallback = SPI_DMAError;
+    
+    /* Enable Rx DMA Request */  
+    hspi->Instance->CR2 |= SPI_CR2_RXDMAEN;
+    
+    /* Enable the Rx DMA channel */
+    HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t) hspi->pRxBuffPtr, hspi->RxXferCount);
+    
+    /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing
+    is performed in DMA reception complete callback  */
+    hspi->hdmatx->XferHalfCpltCallback = NULL;
+    hspi->hdmatx->XferCpltCallback = NULL;
+
+    if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX)
+    {
+      /* Set the DMA error callback */
+      hspi->hdmatx->XferErrorCallback = SPI_DMAError;
+    }
+    else
+    {
+      hspi->hdmatx->XferErrorCallback = NULL;
+    } 
+    
+    /* Enable the Tx DMA channel */
+    HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(hspi);
+        
+    /* Check if the SPI is already enabled */ 
+    if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
+    {
+      /* Enable SPI peripheral */    
+      __HAL_SPI_ENABLE(hspi);
+    }
+    
+    /* Enable Tx DMA Request */  
+    hspi->Instance->CR2 |= SPI_CR2_TXDMAEN;
+        
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Pauses the DMA Transfer.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi)
+{
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  /* Disable the SPI DMA Tx & Rx requests */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the DMA Transfer.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi)
+{
+  /* Process Locked */
+  __HAL_LOCK(hspi);
+
+  /* Enable the SPI DMA Tx & Rx requests */
+  SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(hspi);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Stops the DMA Transfer.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for the specified SPI module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi)
+{
+  /* The Lock is not implemented on this API to allow the user application
+     to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback():
+     when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
+     and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback()
+     */
+  
+  /* Abort the SPI DMA tx Stream */
+  if(hspi->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(hspi->hdmatx);
+  }
+  /* Abort the SPI DMA rx Stream */
+  if(hspi->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(hspi->hdmarx);
+  }
+
+  /* Disable the SPI DMA Tx & Rx requests */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+  hspi->State = HAL_SPI_STATE_READY;
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles SPI interrupt request.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for the specified SPI module.
+  * @retval None
+  */
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi)
+{
+  /* SPI in mode Receiver ----------------------------------------------------*/
+  if((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_OVR) == RESET) &&
+     (__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE) != RESET) && (__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_RXNE) != RESET))
+  {
+    hspi->RxISR(hspi);
+    return;
+  }
+  
+  /* SPI in mode Transmitter ---------------------------------------------------*/
+  if((__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE) != RESET) && (__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_TXE) != RESET))
+  {   
+    hspi->TxISR(hspi);
+    return;
+  }
+  
+  /* SPI in ERROR Treatment ---------------------------------------------------*/
+  if((hspi->Instance->SR & (SPI_FLAG_MODF | SPI_FLAG_OVR | SPI_FLAG_FRE)) != RESET)  
+  {
+    /* SPI Overrun error interrupt occurred -------------------------------------*/
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_OVR) != RESET) 
+    {
+      if(hspi->State != HAL_SPI_STATE_BUSY_TX)
+      {
+        hspi->ErrorCode |= HAL_SPI_ERROR_OVR;
+        __HAL_SPI_CLEAR_OVRFLAG(hspi);
+      }
+      else
+      {
+        return;
+      }
+    }
+    
+    /* SPI Mode Fault error interrupt occurred -------------------------------------*/
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_MODF) != RESET)
+    { 
+      hspi->ErrorCode |= HAL_SPI_ERROR_MODF;
+      __HAL_SPI_CLEAR_MODFFLAG(hspi);
+    }
+    
+    /* SPI Frame error interrupt occurred ----------------------------------------*/
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_FRE) != RESET)
+    { 
+      hspi->ErrorCode |= HAL_SPI_ERROR_FRE;
+      __HAL_SPI_CLEAR_FREFLAG(hspi);
+    }
+    
+    __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE | SPI_IT_TXE | SPI_IT_ERR);
+    hspi->State = HAL_SPI_STATE_READY;
+    HAL_SPI_ErrorCallback(hspi);
+    
+    return;
+  }
+}
+
+/**
+  * @brief Tx Transfer completed callback
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_TxCpltCallback should be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Transfer completed callbacks
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+   
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_RxCpltCallback should be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx and Rx Transfer completed callback
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_TxRxCpltCallback should be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx Half Transfer completed callback
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_TxHalfCpltCallback should be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Half Transfer completed callback
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_RxHalfCpltCallback() should be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx and Rx Half Transfer callback
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_TxRxHalfCpltCallback() should be implemented in the user file
+   */
+}
+
+/**
+  * @brief SPI error callback
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+ __weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hspi);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_SPI_ErrorCallback should be implemented in the user file
+   */
+  /* NOTE : The ErrorCode parameter in the hspi handle is updated by the SPI processes
+            and user can use HAL_SPI_GetError() API to check the latest error occurred
+   */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions
+  *  @brief   SPI control functions
+  *
+@verbatim
+ ===============================================================================
+                      ##### Peripheral State and Errors functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to control the SPI.
+     (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral
+     (+) HAL_SPI_GetError() check in run-time Errors occurring during communication
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the SPI state
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval SPI state
+  */
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi)
+{
+  return hspi->State;
+}
+
+/**
+  * @brief  Return the SPI error code
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval SPI error code in bitmap format
+  */
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi)
+{
+  return hspi->ErrorCode;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Private_Functions SPI Private Functions
+  * @{
+  */
+
+/**
+  * @brief DMA SPI transmit process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* DMA Normal Mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    /* Disable Tx DMA Request */
+    CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+    /* Clear OVERUN flag in 2 Lines communication mode because received data is not read */
+    if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+    {
+      __HAL_SPI_CLEAR_OVRFLAG(hspi);
+    }
+
+    hspi->TxXferCount = 0;
+    hspi->State = HAL_SPI_STATE_READY;
+
+    if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+    {
+      HAL_SPI_ErrorCallback(hspi);
+      return;
+    }
+  }
+  HAL_SPI_TxCpltCallback(hspi);
+}
+
+/**
+  * @brief DMA SPI receive process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  __IO uint16_t tmpreg;
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* DMA Normal mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {  
+    /* CRC handling */
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      /* Wait until TXE flag */
+      if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, SPI_DEFAULT_TIMEOUT) != HAL_OK)
+      {
+        /* Error on the CRC reception */
+        hspi->ErrorCode|= HAL_SPI_ERROR_CRC;      
+      }
+      if(hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+      {        
+        tmpreg = hspi->Instance->DR;
+        UNUSED(tmpreg); /* To avoid GCC warning */
+      }
+      else
+      {
+        tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+        UNUSED(tmpreg); /* To avoid GCC warning */
+        
+        if(hspi->Init.CRCLength == SPI_CRC_LENGTH_16BIT)
+        {
+          if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_RXNE, SPI_FLAG_RXNE, SPI_DEFAULT_TIMEOUT) != HAL_OK)
+          {
+            /* Error on the CRC reception */
+            hspi->ErrorCode|= HAL_SPI_ERROR_CRC;      
+          }
+          tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+          UNUSED(tmpreg); /* To avoid GCC warning */
+        }
+      }  
+    }
+    
+    /* Disable Rx DMA Request */
+    hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
+    /* Disable Tx DMA Request (done by default to handle the case master rx direction 2 lines) */
+    hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
+    
+    /* Check the end of the transaction */
+    SPI_EndRxTransaction(hspi,SPI_DEFAULT_TIMEOUT);
+    
+    hspi->RxXferCount = 0;
+    hspi->State = HAL_SPI_STATE_READY;
+    
+    /* Check if CRC error occurred */
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+    {
+      hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+      __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+      HAL_SPI_RxCpltCallback(hspi);
+    }
+    else
+    {
+      if(hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+      {
+        HAL_SPI_RxCpltCallback(hspi);
+      }
+      else
+      {
+        HAL_SPI_ErrorCallback(hspi); 
+      }
+    }
+  }
+  else
+  {
+    HAL_SPI_RxCpltCallback(hspi);
+  }
+}
+
+/**
+  * @brief DMA SPI transmit receive process complete callback
+  * @param  hdma : pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  __IO int16_t tmpreg;
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* CRC handling */
+  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+  {
+    if((hspi->Init.DataSize == SPI_DATASIZE_8BIT) && (hspi->Init.CRCLength == SPI_CRC_LENGTH_8BIT))
+    {        
+      if(SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_QUARTER_FULL, SPI_DEFAULT_TIMEOUT) != HAL_OK)
+      {
+        /* Error on the CRC reception */
+        hspi->ErrorCode|= HAL_SPI_ERROR_CRC;      
+      }
+      tmpreg = *(__IO uint8_t *)&hspi->Instance->DR;
+      UNUSED(tmpreg); /* To avoid GCC warning */
+    }
+    else
+    {
+      if(SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_HALF_FULL, SPI_DEFAULT_TIMEOUT) != HAL_OK)
+      {
+        /* Error on the CRC reception */
+        hspi->ErrorCode|= HAL_SPI_ERROR_CRC;      
+      }
+      tmpreg = hspi->Instance->DR;
+      UNUSED(tmpreg); /* To avoid GCC warning */
+    }
+  }  
+  
+  /* Check the end of the transaction */
+  SPI_EndRxTxTransaction(hspi,SPI_DEFAULT_TIMEOUT);
+  
+  /* Disable Tx DMA Request */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+  
+  /* Disable Rx DMA Request */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+   
+  hspi->TxXferCount = 0;
+  hspi->RxXferCount = 0;
+  hspi->State = HAL_SPI_STATE_READY;
+  
+  /* Check if CRC error occurred */
+  if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+  {
+    hspi->ErrorCode = HAL_SPI_ERROR_CRC;
+    __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+    HAL_SPI_ErrorCallback(hspi);
+  }
+  else
+  {     
+    if(hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+    {
+      HAL_SPI_TxRxCpltCallback(hspi);
+    }
+    else
+    {
+      HAL_SPI_ErrorCallback(hspi);
+    }
+  }
+}
+
+/**
+  * @brief DMA SPI half transmit process complete callback
+  * @param  hdma : pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_SPI_TxHalfCpltCallback(hspi);
+}
+
+/**
+  * @brief DMA SPI half receive process complete callback
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_SPI_RxHalfCpltCallback(hspi);
+}
+
+/**
+  * @brief DMA SPI Half transmit receive process complete callback
+  * @param  hdma : pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  HAL_SPI_TxRxHalfCpltCallback(hspi);
+}
+
+/**
+  * @brief DMA SPI communication error callback
+  * @param  hdma : pointer to a DMA_HandleTypeDef structure that contains
+  *               the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void SPI_DMAError(DMA_HandleTypeDef *hdma)
+{
+  SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* Stop the disable DMA transfer on SPI side */
+  CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN | SPI_CR2_RXDMAEN);
+
+  hspi->ErrorCode|= HAL_SPI_ERROR_DMA;
+  hspi->State = HAL_SPI_STATE_READY;
+  HAL_SPI_ErrorCallback(hspi);
+}
+
+/**
+  * @brief  Rx Handler for Transmit and Receive in Interrupt mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_2linesRxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  /* Receive data in packing mode */
+  if(hspi->RxXferCount > 1)
+  {
+    *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+    hspi->pRxBuffPtr += sizeof(uint16_t);
+    hspi->RxXferCount -= 2;
+    if(hspi->RxXferCount == 1)
+    {
+      /* set fiforxthreshold according the reception data length: 8bit */
+      SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+    }
+  }
+  /* Receive data in 8 Bit mode */
+  else
+  {
+    *hspi->pRxBuffPtr++ = *((__IO uint8_t *)&hspi->Instance->DR);
+    hspi->RxXferCount--;
+  }
+  
+  /* check end of the reception */
+  if(hspi->RxXferCount == 0)
+  {
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+      hspi->RxISR =  SPI_2linesRxISR_8BITCRC;
+      return;
+    }
+        
+    /* Disable RXNE interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+    if(hspi->TxXferCount == 0)
+    {
+      SPI_CloseRxTx_ISR(hspi);
+    }
+  }
+}
+
+/**
+  * @brief  Rx Handler for Transmit and Receive in Interrupt mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_2linesRxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+  __IO uint8_t tmpreg;
+  
+  tmpreg = *((__IO uint8_t *)&hspi->Instance->DR);
+  UNUSED(tmpreg); /* To avoid GCC warning */
+
+  hspi->CRCSize--;
+  
+  /* check end of the reception */
+  if(hspi->CRCSize == 0)
+  {
+    /* Disable RXNE interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+    if(hspi->TxXferCount == 0)
+    {
+      SPI_CloseRxTx_ISR(hspi);
+    }
+  }
+}
+
+/**
+  * @brief  Tx Handler for Transmit and Receive in Interrupt mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_2linesTxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  /* Transmit data in packing Bit mode */
+  if(hspi->TxXferCount >= 2)
+  {
+    hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+    hspi->pTxBuffPtr += sizeof(uint16_t);
+    hspi->TxXferCount -= 2;
+  }
+  /* Transmit data in 8 Bit mode */
+  else
+  {        
+    *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+    hspi->TxXferCount--;
+  }
+  
+  /* check the end of the transmission */
+  if(hspi->TxXferCount == 0)
+  {
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+    }
+    /* Disable TXE interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+    
+    if(hspi->RxXferCount == 0)
+    { 
+      SPI_CloseRxTx_ISR(hspi);
+    }
+  }
+}
+
+/**
+  * @brief  Rx 16Bit Handler for Transmit and Receive in Interrupt mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_2linesRxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  /* Receive data in 16 Bit mode */
+  *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
+  hspi->pRxBuffPtr += sizeof(uint16_t);
+  hspi->RxXferCount--;
+
+  if(hspi->RxXferCount == 0)
+  {
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      hspi->RxISR =  SPI_2linesRxISR_16BITCRC;
+      return;
+    }
+    
+    /* Disable RXNE interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+    if(hspi->TxXferCount == 0)
+    {
+      SPI_CloseRxTx_ISR(hspi);
+    }
+  }
+}
+
+/**
+  * @brief  Manage the CRC 16bit receive for Transmit and Receive in Interrupt mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_2linesRxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+  /* Receive data in 16 Bit mode */
+  __IO uint16_t tmpreg = hspi->Instance->DR;
+  UNUSED(tmpreg); /* To avoid GCC warning */
+
+  /* Disable RXNE interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, SPI_IT_RXNE);
+
+  SPI_CloseRxTx_ISR(hspi);
+}
+
+/**
+  * @brief  Tx Handler for Transmit and Receive in Interrupt mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_2linesTxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  /* Transmit data in 16 Bit mode */
+  hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+  hspi->pTxBuffPtr += sizeof(uint16_t);
+  hspi->TxXferCount--;
+  
+  /* Enable CRC Transmission */
+  if(hspi->TxXferCount == 0)
+  {
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+    }
+    /* Disable TXE interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, SPI_IT_TXE);
+
+    if(hspi->RxXferCount == 0)
+    {
+      SPI_CloseRxTx_ISR(hspi);
+    }
+  }
+}
+
+/**
+  * @brief  Manage the CRC receive in Interrupt context
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_RxISR_8BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+  __IO uint8_t tmpreg;
+  tmpreg = *((__IO uint8_t*)&hspi->Instance->DR);
+  UNUSED(tmpreg); /* To avoid GCC warning */
+
+  hspi->CRCSize--;
+  
+  if(hspi->CRCSize == 0)
+  { 
+    SPI_CloseRx_ISR(hspi);
+  }
+}
+
+/**
+  * @brief  Manage the receive in Interrupt context
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_RxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  *hspi->pRxBuffPtr++ = (*(__IO uint8_t *)&hspi->Instance->DR);
+  hspi->RxXferCount--;
+
+  /* Enable CRC Transmission */
+  if((hspi->RxXferCount == 1) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+  {
+    hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+  }
+
+  if(hspi->RxXferCount == 0)
+  {
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      hspi->RxISR =  SPI_RxISR_8BITCRC;
+      return;
+    }
+    SPI_CloseRx_ISR(hspi);
+  }
+}
+
+/**
+  * @brief  Manage the CRC 16bit receive in Interrupt context
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_RxISR_16BITCRC(struct __SPI_HandleTypeDef *hspi)
+{
+  __IO uint16_t tmpreg;
+  
+  tmpreg = hspi->Instance->DR;
+  UNUSED(tmpreg); /* To avoid GCC warning */
+
+  /* Disable RXNE and ERR interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+  
+  SPI_CloseRx_ISR(hspi);
+}
+
+/**
+  * @brief  Manage the 16Bit receive in Interrupt context
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_RxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  *((uint16_t *)hspi->pRxBuffPtr) = hspi->Instance->DR;
+  hspi->pRxBuffPtr += sizeof(uint16_t);
+  hspi->RxXferCount--;
+  
+  /* Enable CRC Transmission */
+  if((hspi->RxXferCount == 1) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
+  {
+    hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+  }
+  
+  if(hspi->RxXferCount == 0)
+  {    
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      hspi->RxISR = SPI_RxISR_16BITCRC;
+      return;
+    }
+    SPI_CloseRx_ISR(hspi);
+  }
+}
+
+/**
+  * @brief  Handle the data 8Bit transmit in Interrupt mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_TxISR_8BIT(struct __SPI_HandleTypeDef *hspi)
+{
+  *(__IO uint8_t *)&hspi->Instance->DR = (*hspi->pTxBuffPtr++);
+  hspi->TxXferCount--;
+  
+  if(hspi->TxXferCount == 0)
+  {
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      /* Enable CRC Transmission */
+      hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+    }
+    SPI_CloseTx_ISR(hspi);
+  }
+}
+
+/**
+  * @brief  Handle the data 16Bit transmit in Interrupt mode
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_TxISR_16BIT(struct __SPI_HandleTypeDef *hspi)
+{ 
+  /* Transmit data in 16 Bit mode */
+  hspi->Instance->DR = *((uint16_t *)hspi->pTxBuffPtr);
+  hspi->pTxBuffPtr += sizeof(uint16_t);
+  hspi->TxXferCount--;
+  
+  if(hspi->TxXferCount == 0)
+  {
+    if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+    {
+      /* Enable CRC Transmission */
+      hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
+    }
+    SPI_CloseTx_ISR(hspi);
+  }
+}
+
+/**
+  * @brief This function handles SPI Communication Timeout.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param Flag : SPI flag to check
+  * @param State : flag state to check
+  * @param Timeout : Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SPI_WaitFlagStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, uint32_t State, uint32_t Timeout)
+{
+  uint32_t tickstart = HAL_GetTick();
+
+  while((hspi->Instance->SR & Flag) != State)
+  {
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0) || ((HAL_GetTick()-tickstart) >= Timeout))
+      {
+        /* Disable the SPI and reset the CRC: the CRC value should be cleared
+        on both master and slave sides in order to resynchronize the master
+        and slave for their respective CRC calculation */
+
+        /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+        __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+        if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+        {
+          /* Disable SPI peripheral */
+          __HAL_SPI_DISABLE(hspi);
+        }
+
+        /* Reset CRC Calculation */
+        if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+        {
+          SPI_RESET_CRC(hspi);
+        }
+        
+        hspi->State= HAL_SPI_STATE_READY;
+        
+        /* Process Unlocked */
+        __HAL_UNLOCK(hspi);
+        
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+  
+  return HAL_OK;      
+}
+
+/**
+  * @brief This function handles SPI Communication Timeout.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param Fifo : Fifo to check
+  * @param State : Fifo state to check
+  * @param Timeout : Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef SPI_WaitFifoStateUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Fifo, uint32_t State, uint32_t Timeout)
+{
+  __IO uint8_t tmpreg;
+  uint32_t tickstart = HAL_GetTick();
+
+  while((hspi->Instance->SR & Fifo) != State)
+  {
+    if((Fifo == SPI_SR_FRLVL) && (State == SPI_FRLVL_EMPTY))
+    {
+      tmpreg = *((__IO uint8_t*)&hspi->Instance->DR);
+      UNUSED(tmpreg); /* To avoid GCC warning */
+    }
+
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0) || ((HAL_GetTick()-tickstart) >= Timeout))
+      {
+        /* Disable the SPI and reset the CRC: the CRC value should be cleared
+                  on both master and slave sides in order to resynchronize the master
+                 and slave for their respective CRC calculation */
+
+        /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
+        __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
+
+        if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+        {
+          /* Disable SPI peripheral */
+          __HAL_SPI_DISABLE(hspi);
+        }
+
+        /* Reset CRC Calculation */
+        if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
+        {
+          SPI_RESET_CRC(hspi);
+        }
+
+        hspi->State = HAL_SPI_STATE_READY;
+
+        /* Process Unlocked */
+        __HAL_UNLOCK(hspi);
+
+        return HAL_TIMEOUT;
+      }
+    }
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief This function handles the check of the RX transaction complete.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @param Timeout : Timeout duration
+  * @retval None
+  */
+static HAL_StatusTypeDef SPI_EndRxTransaction(SPI_HandleTypeDef *hspi,  uint32_t Timeout)
+{
+  if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
+  {
+    /* Disable SPI peripheral */
+    __HAL_SPI_DISABLE(hspi);
+  }
+  if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout) != HAL_OK)
+  {  
+    hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    return HAL_TIMEOUT;
+  }
+  if(SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout) != HAL_OK) 
+  {
+    hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    return HAL_TIMEOUT;
+  }
+  
+  return HAL_OK;
+}
+  
+/**
+  * @brief This function handles the check of the RXTX or TX transaction complete.
+  * @param hspi: SPI handle
+  * @param Timeout : Timeout duration
+  */
+static HAL_StatusTypeDef SPI_EndRxTxTransaction(SPI_HandleTypeDef *hspi, uint32_t Timeout)
+{
+  /* Procedure to check the transaction complete */
+  if(SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FTLVL, SPI_FTLVL_EMPTY, Timeout) != HAL_OK)
+  {
+    hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    return HAL_TIMEOUT;
+  }
+  if(SPI_WaitFlagStateUntilTimeout(hspi, SPI_FLAG_BSY, RESET, Timeout) != HAL_OK)
+  {
+    hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    return HAL_TIMEOUT;
+  }
+  if(SPI_WaitFifoStateUntilTimeout(hspi, SPI_FLAG_FRLVL, SPI_FRLVL_EMPTY, Timeout) != HAL_OK)
+  {
+    hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
+    return HAL_TIMEOUT;
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief This function handles the close of the RXTX transaction.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_CloseRxTx_ISR(SPI_HandleTypeDef *hspi)
+{
+  /* Disable ERR interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, SPI_IT_ERR);
+
+  /* Check if CRC error occurred */
+  if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+  {
+    hspi->State = HAL_SPI_STATE_READY;
+    hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+    __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+    HAL_SPI_ErrorCallback(hspi);
+  }
+  else
+  {
+    if(hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+    {
+      if(hspi->State == HAL_SPI_STATE_BUSY_RX)
+      {
+      	hspi->State = HAL_SPI_STATE_READY;
+        HAL_SPI_RxCpltCallback(hspi);
+      }
+      else
+      {
+      	hspi->State = HAL_SPI_STATE_READY;
+        HAL_SPI_TxRxCpltCallback(hspi);
+      }      
+    }
+    else
+    {
+      hspi->State = HAL_SPI_STATE_READY;
+      HAL_SPI_ErrorCallback(hspi);
+    }
+  }
+}
+
+/**
+  * @brief This function handles the close of the RX transaction.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_CloseRx_ISR(SPI_HandleTypeDef *hspi)
+{
+    /* Disable RXNE and ERR interrupt */
+    __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
+    
+    /* Check the end of the transaction */
+    SPI_EndRxTransaction(hspi,SPI_DEFAULT_TIMEOUT);
+
+    hspi->State = HAL_SPI_STATE_READY;
+
+    /* Check if CRC error occurred */
+    if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
+    {
+      hspi->ErrorCode|= HAL_SPI_ERROR_CRC;
+      __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
+      HAL_SPI_ErrorCallback(hspi);
+    }
+    else
+    {
+      if(hspi->ErrorCode == HAL_SPI_ERROR_NONE)
+      {
+        HAL_SPI_RxCpltCallback(hspi);
+      }
+      else
+      {
+        HAL_SPI_ErrorCallback(hspi);
+      }
+    }
+}
+
+/**
+  * @brief This function handles the close of the TX transaction.
+  * @param  hspi: pointer to a SPI_HandleTypeDef structure that contains
+  *               the configuration information for SPI module.
+  * @retval None
+  */
+static void SPI_CloseTx_ISR(SPI_HandleTypeDef *hspi)
+{
+  /* Disable TXE and ERR interrupt */
+  __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
+
+  /* Clear OVERUN flag in 2 Lines communication mode because received is not read */
+  if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
+  {
+    __HAL_SPI_CLEAR_OVRFLAG(hspi);
+  }
+
+  hspi->State = HAL_SPI_STATE_READY;
+  if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
+  {
+    HAL_SPI_ErrorCallback(hspi);
+  }
+  else
+  {
+    HAL_SPI_TxCpltCallback(hspi);
+  }
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_SPI_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_spi.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,696 @@
+ /**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_spi.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of SPI HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_SPI_H
+#define __STM32F7xx_HAL_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SPI
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+  * @{
+  */
+
+/**
+  * @brief  SPI Configuration Structure definition
+  */
+typedef struct
+{
+  uint32_t Mode;                /*!< Specifies the SPI operating mode.
+                                     This parameter can be a value of @ref SPI_Mode */
+
+  uint32_t Direction;           /*!< Specifies the SPI bidirectional mode state.
+                                     This parameter can be a value of @ref SPI_Direction */
+
+  uint32_t DataSize;            /*!< Specifies the SPI data size.
+                                     This parameter can be a value of @ref SPI_Data_Size */
+
+  uint32_t CLKPolarity;         /*!< Specifies the serial clock steady state.
+                                     This parameter can be a value of @ref SPI_Clock_Polarity */
+
+  uint32_t CLKPhase;            /*!< Specifies the clock active edge for the bit capture.
+                                     This parameter can be a value of @ref SPI_Clock_Phase */
+
+  uint32_t NSS;                 /*!< Specifies whether the NSS signal is managed by
+                                     hardware (NSS pin) or by software using the SSI bit.
+                                     This parameter can be a value of @ref SPI_Slave_Select_management */
+
+  uint32_t BaudRatePrescaler;   /*!< Specifies the Baud Rate prescaler value which will be
+                                     used to configure the transmit and receive SCK clock.
+                                     This parameter can be a value of @ref SPI_BaudRate_Prescaler
+                                     @note The communication clock is derived from the master
+                                     clock. The slave clock does not need to be set. */
+
+  uint32_t FirstBit;            /*!< Specifies whether data transfers start from MSB or LSB bit.
+                                     This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+  uint32_t TIMode;              /*!< Specifies if the TI mode is enabled or not .
+                                     This parameter can be a value of @ref SPI_TI_mode */
+
+  uint32_t CRCCalculation;      /*!< Specifies if the CRC calculation is enabled or not.
+                                     This parameter can be a value of @ref SPI_CRC_Calculation */
+
+  uint32_t CRCPolynomial;       /*!< Specifies the polynomial used for the CRC calculation.
+                                     This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
+
+  uint32_t CRCLength;           /*!< Specifies the CRC Length used for the CRC calculation.
+                                     CRC Length is only used with Data8 and Data16, not other data size
+                                     This parameter can be a value of @ref SPI_CRC_length */
+
+  uint32_t NSSPMode;            /*!< Specifies whether the NSSP signal is enabled or not .
+                                     This parameter can be a value of @ref SPI_NSSP_Mode
+                                     This mode is activated by the NSSP bit in the SPIx_CR2 register and
+                                     it takes effect only if the SPI interface is configured as Motorola SPI
+                                     master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
+                                     CPOL setting is ignored).. */
+} SPI_InitTypeDef;
+
+/**
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_SPI_STATE_RESET      = 0x00,    /*!< Peripheral not Initialized                         */
+  HAL_SPI_STATE_READY      = 0x01,    /*!< Peripheral Initialized and ready for use           */
+  HAL_SPI_STATE_BUSY       = 0x02,    /*!< an internal process is ongoing                     */
+  HAL_SPI_STATE_BUSY_TX    = 0x03,    /*!< Data Transmission process is ongoing               */
+  HAL_SPI_STATE_BUSY_RX    = 0x04,    /*!< Data Reception process is ongoing                  */
+  HAL_SPI_STATE_BUSY_TX_RX = 0x05,    /*!< Data Transmission and Reception process is ongoing*/
+  HAL_SPI_STATE_ERROR      = 0x06     /*!< SPI error state                                   */
+}HAL_SPI_StateTypeDef;
+
+/**
+  * @brief  SPI handle Structure definition
+  */
+typedef struct __SPI_HandleTypeDef
+{
+  SPI_TypeDef             *Instance;      /* SPI registers base address     */
+
+  SPI_InitTypeDef         Init;           /* SPI communication parameters   */
+
+  uint8_t                 *pTxBuffPtr;    /* Pointer to SPI Tx transfer Buffer */
+
+  uint16_t                TxXferSize;     /* SPI Tx Transfer size */
+
+  uint16_t                TxXferCount;    /* SPI Tx Transfer Counter */
+
+  uint8_t                 *pRxBuffPtr;    /* Pointer to SPI Rx transfer Buffer */
+
+  uint16_t                RxXferSize;     /* SPI Rx Transfer size */
+
+  uint16_t                RxXferCount;    /* SPI Rx Transfer Counter */
+
+  uint32_t                CRCSize;        /* SPI CRC size used for the transfer */
+
+  void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Rx IRQ handler   */
+
+  void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Tx IRQ handler   */
+
+  DMA_HandleTypeDef       *hdmatx;        /* SPI Tx DMA Handle parameters   */
+
+  DMA_HandleTypeDef       *hdmarx;        /* SPI Rx DMA Handle parameters   */
+
+  HAL_LockTypeDef         Lock;           /* Locking object                 */
+
+  HAL_SPI_StateTypeDef    State;          /* SPI communication state        */
+
+  uint32_t                ErrorCode;      /* SPI Error code                 */
+
+}SPI_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
+  * @{
+  */
+
+/** @defgroup SPI_Error_Code SPI Error Code
+  * @{
+  */
+#define HAL_SPI_ERROR_NONE   (uint32_t)0x00000000  /*!< No error                          */
+#define HAL_SPI_ERROR_MODF   (uint32_t)0x00000001  /*!< MODF error                        */
+#define HAL_SPI_ERROR_CRC    (uint32_t)0x00000002  /*!< CRC error                         */
+#define HAL_SPI_ERROR_OVR    (uint32_t)0x00000004  /*!< OVR error                         */
+#define HAL_SPI_ERROR_FRE    (uint32_t)0x00000008  /*!< FRE error                         */
+#define HAL_SPI_ERROR_DMA    (uint32_t)0x00000010  /*!< DMA transfer error                */
+#define HAL_SPI_ERROR_FLAG   (uint32_t)0x00000020  /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
+#define HAL_SPI_ERROR_UNKNOW (uint32_t)0x00000040  /*!< Unknow Error error                */
+/**
+  * @}
+  */
+
+
+/** @defgroup SPI_Mode SPI Mode
+  * @{
+  */
+#define SPI_MODE_SLAVE                  ((uint32_t)0x00000000)
+#define SPI_MODE_MASTER                 (SPI_CR1_MSTR | SPI_CR1_SSI)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Direction SPI Direction Mode
+  * @{
+  */
+#define SPI_DIRECTION_2LINES            ((uint32_t)0x00000000)
+#define SPI_DIRECTION_2LINES_RXONLY     SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE             SPI_CR1_BIDIMODE
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Data_Size SPI Data Size
+  * @{
+  */
+#define SPI_DATASIZE_4BIT               ((uint32_t)0x0300)
+#define SPI_DATASIZE_5BIT               ((uint32_t)0x0400)
+#define SPI_DATASIZE_6BIT               ((uint32_t)0x0500)
+#define SPI_DATASIZE_7BIT               ((uint32_t)0x0600)
+#define SPI_DATASIZE_8BIT               ((uint32_t)0x0700)
+#define SPI_DATASIZE_9BIT               ((uint32_t)0x0800)
+#define SPI_DATASIZE_10BIT              ((uint32_t)0x0900)
+#define SPI_DATASIZE_11BIT              ((uint32_t)0x0A00)
+#define SPI_DATASIZE_12BIT              ((uint32_t)0x0B00)
+#define SPI_DATASIZE_13BIT              ((uint32_t)0x0C00)
+#define SPI_DATASIZE_14BIT              ((uint32_t)0x0D00)
+#define SPI_DATASIZE_15BIT              ((uint32_t)0x0E00)
+#define SPI_DATASIZE_16BIT              ((uint32_t)0x0F00)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+  * @{
+  */
+#define SPI_POLARITY_LOW                ((uint32_t)0x00000000)
+#define SPI_POLARITY_HIGH               SPI_CR1_CPOL
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
+  * @{
+  */
+#define SPI_PHASE_1EDGE                 ((uint32_t)0x00000000)
+#define SPI_PHASE_2EDGE                 SPI_CR1_CPHA
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Slave_Select_management SPI Slave Select management
+  * @{
+  */
+#define SPI_NSS_SOFT                    SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT              ((uint32_t)0x00000000)
+#define SPI_NSS_HARD_OUTPUT             ((uint32_t)0x00040000)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_NSSP_Mode SPI NSS Pulse Mode
+  * @{
+  */
+#define SPI_NSS_PULSE_ENABLE            SPI_CR2_NSSP
+#define SPI_NSS_PULSE_DISABLE           ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
+  * @{
+  */
+#define SPI_BAUDRATEPRESCALER_2         ((uint32_t)0x00000000)
+#define SPI_BAUDRATEPRESCALER_4         ((uint32_t)0x00000008)
+#define SPI_BAUDRATEPRESCALER_8         ((uint32_t)0x00000010)
+#define SPI_BAUDRATEPRESCALER_16        ((uint32_t)0x00000018)
+#define SPI_BAUDRATEPRESCALER_32        ((uint32_t)0x00000020)
+#define SPI_BAUDRATEPRESCALER_64        ((uint32_t)0x00000028)
+#define SPI_BAUDRATEPRESCALER_128       ((uint32_t)0x00000030)
+#define SPI_BAUDRATEPRESCALER_256       ((uint32_t)0x00000038)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission
+  * @{
+  */
+#define SPI_FIRSTBIT_MSB                ((uint32_t)0x00000000)
+#define SPI_FIRSTBIT_LSB                SPI_CR1_LSBFIRST
+/**
+  * @}
+  */
+
+/** @defgroup SPI_TI_mode SPI TI mode
+  * @{
+  */
+#define SPI_TIMODE_DISABLE              ((uint32_t)0x00000000)
+#define SPI_TIMODE_ENABLE               SPI_CR2_FRF
+/**
+  * @}
+  */
+
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
+  * @{
+  */
+#define SPI_CRCCALCULATION_DISABLE      ((uint32_t)0x00000000)
+#define SPI_CRCCALCULATION_ENABLE       SPI_CR1_CRCEN
+/**
+  * @}
+  */
+
+/** @defgroup SPI_CRC_length SPI CRC Length
+  * @{
+  * This parameter can be one of the following values:
+  *     SPI_CRC_LENGTH_DATASIZE: aligned with the data size
+  *     SPI_CRC_LENGTH_8BIT    : CRC 8bit
+  *     SPI_CRC_LENGTH_16BIT   : CRC 16bit
+  */
+#define SPI_CRC_LENGTH_DATASIZE         ((uint32_t)0x00000000)
+#define SPI_CRC_LENGTH_8BIT             ((uint32_t)0x00000001)
+#define SPI_CRC_LENGTH_16BIT            ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup SPI_FIFO_reception_threshold SPI FIFO Reception Threshold
+  * @{
+  * This parameter can be one of the following values:
+  *     SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF :
+  *          RXNE event is generated if the FIFO
+  *          level is greater or equal to 1/2(16-bits).
+  *     SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO
+  *          level is greater or equal to 1/4(8 bits). */
+#define SPI_RXFIFO_THRESHOLD            SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_QF         SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_HF         ((uint32_t)0x00000000)
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Interrupt_configuration_definition SPI Interrupt configuration definition
+  * @brief SPI Interrupt definition
+  *        Elements values convention: 0xXXXXXXXX
+  *           - XXXXXXXX  : Interrupt control mask
+  * @{
+  */
+#define SPI_IT_TXE                      SPI_CR2_TXEIE
+#define SPI_IT_RXNE                     SPI_CR2_RXNEIE
+#define SPI_IT_ERR                      SPI_CR2_ERRIE
+/**
+  * @}
+  */
+
+
+/** @defgroup SPI_Flag_definition SPI Flag definition
+  * @brief Flag definition
+  *        Elements values convention: 0xXXXXYYYY
+  *           - XXXX  : Flag register Index
+  *           - YYYY  : Flag mask
+  * @{
+  */
+#define SPI_FLAG_RXNE                   SPI_SR_RXNE   /* SPI status flag: Rx buffer not empty flag */
+#define SPI_FLAG_TXE                    SPI_SR_TXE    /* SPI status flag: Tx buffer empty flag */
+#define SPI_FLAG_BSY                    SPI_SR_BSY    /* SPI status flag: Busy flag */
+#define SPI_FLAG_CRCERR                 SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
+#define SPI_FLAG_MODF                   SPI_SR_MODF   /* SPI Error flag: Mode fault flag */
+#define SPI_FLAG_OVR                    SPI_SR_OVR    /* SPI Error flag: Overrun flag */
+#define SPI_FLAG_FRE                    SPI_SR_FRE    /* SPI Error flag: TI mode frame format error flag */
+#define SPI_FLAG_FTLVL                  SPI_SR_FTLVL  /* SPI fifo transmission level */
+#define SPI_FLAG_FRLVL                  SPI_SR_FRLVL  /* SPI fifo reception level */
+/**
+  * @}
+  */
+
+/** @defgroup SPI_transmission_fifo_status_level SPI Transmission FIFO Status Level
+  * @{
+  */
+#define SPI_FTLVL_EMPTY           ((uint32_t)0x0000)
+#define SPI_FTLVL_QUARTER_FULL    ((uint32_t)0x0800)
+#define SPI_FTLVL_HALF_FULL       ((uint32_t)0x1000)
+#define SPI_FTLVL_FULL            ((uint32_t)0x1800)
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_reception_fifo_status_level SPI Reception FIFO Status Level
+  * @{
+  */
+#define SPI_FRLVL_EMPTY           ((uint32_t)0x0000)
+#define SPI_FRLVL_QUARTER_FULL    ((uint32_t)0x0200)
+#define SPI_FRLVL_HALF_FULL       ((uint32_t)0x0400)
+#define SPI_FRLVL_FULL            ((uint32_t)0x0600)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+  * @{
+  */
+
+/** @brief  Reset SPI handle state
+  * @param  __HANDLE__: SPI handle.
+  * @retval None
+  */
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+
+/** @brief  Enables or disables the specified SPI interrupts.
+  * @param  __HANDLE__ : specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @param  __INTERRUPT__ : specifies the interrupt source to enable or disable.
+  *        This parameter can be one of the following values:
+  *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg SPI_IT_ERR: Error interrupt enable
+  * @retval None
+  */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__)  ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief  Checks if the specified SPI interrupt source is enabled or disabled.
+  * @param  __HANDLE__ : specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @param  __INTERRUPT__ : specifies the SPI interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+  *            @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+  *            @arg SPI_IT_ERR: Error interrupt enable
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief  Checks whether the specified SPI flag is set or not.
+  * @param  __HANDLE__ : specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @param  __FLAG__ : specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+  *            @arg SPI_FLAG_TXE: Transmit buffer empty flag
+  *            @arg SPI_FLAG_CRCERR: CRC error flag
+  *            @arg SPI_FLAG_MODF: Mode fault flag
+  *            @arg SPI_FLAG_OVR: Overrun flag
+  *            @arg SPI_FLAG_BSY: Busy flag
+  *            @arg SPI_FLAG_FRE: Frame format error flag
+  *            @arg SPI_FLAG_FTLVL: SPI fifo transmission level
+  *            @arg SPI_FLAG_FRLVL: SPI fifo reception level
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Clears the SPI CRCERR pending flag.
+  * @param  __HANDLE__ : specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
+
+/** @brief  Clears the SPI MODF pending flag.
+  * @param  __HANDLE__ : specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  *
+  * @retval None
+  */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__)        \
+   do{                                              \
+   __IO uint32_t tmpreg = 0x00;                          \
+     tmpreg = (__HANDLE__)->Instance->SR;           \
+     (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE); \
+     UNUSED(tmpreg);                                \
+   } while(0)
+
+/** @brief  Clears the SPI OVR pending flag.
+  * @param  __HANDLE__ : specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  *
+  * @retval None
+  */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__)         \
+   do{                                              \
+   __IO uint32_t tmpreg = 0x00;                          \
+     tmpreg = (__HANDLE__)->Instance->DR;           \
+     tmpreg = (__HANDLE__)->Instance->SR;           \
+     UNUSED(tmpreg);                                \
+   } while(0)
+
+/** @brief  Clears the SPI FRE pending flag.
+  * @param  __HANDLE__ : specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  *
+  * @retval None
+  */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__)         \
+   do{                                              \
+   __IO uint32_t tmpreg = 0x00;                          \
+     tmpreg = (__HANDLE__)->Instance->SR;           \
+     UNUSED(tmpreg);                                \
+   } while(0)
+
+/** @brief  Enables the SPI.
+  * @param  __HANDLE__ : specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |=  SPI_CR1_SPE)
+
+/** @brief  Disables the SPI.
+  * @param  __HANDLE__ : specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE))
+
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup SPI_Private_Macros   SPI Private Macros
+  * @{
+  */
+
+/** @brief  Sets the SPI transmit-only mode.
+  * @param  __HANDLE__ : specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+
+/** @brief  Sets the SPI receive-only mode.
+  * @param  __HANDLE__ : specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE))
+
+/** @brief  Resets the CRC calculation of the SPI.
+  * @param  __HANDLE__ : specifies the SPI Handle.
+  *         This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+  * @retval None
+  */
+#define SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_CRCEN);\
+                                     (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
+                           ((MODE) == SPI_MODE_MASTER))
+
+#define IS_SPI_DIRECTION(MODE)   (((MODE) == SPI_DIRECTION_2LINES) || \
+                                  ((MODE) == SPI_DIRECTION_2LINES_RXONLY) ||\
+                                  ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES)|| \
+                                                 ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
+                                   ((DATASIZE) == SPI_DATASIZE_15BIT) || \
+                                   ((DATASIZE) == SPI_DATASIZE_14BIT) || \
+                                   ((DATASIZE) == SPI_DATASIZE_13BIT) || \
+                                   ((DATASIZE) == SPI_DATASIZE_12BIT) || \
+                                   ((DATASIZE) == SPI_DATASIZE_11BIT) || \
+                                   ((DATASIZE) == SPI_DATASIZE_10BIT) || \
+                                   ((DATASIZE) == SPI_DATASIZE_9BIT)  || \
+                                   ((DATASIZE) == SPI_DATASIZE_8BIT)  || \
+                                   ((DATASIZE) == SPI_DATASIZE_7BIT)  || \
+                                   ((DATASIZE) == SPI_DATASIZE_6BIT)  || \
+                                   ((DATASIZE) == SPI_DATASIZE_5BIT)  || \
+                                   ((DATASIZE) == SPI_DATASIZE_4BIT))
+
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
+                           ((CPOL) == SPI_POLARITY_HIGH))
+
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
+                           ((CPHA) == SPI_PHASE_2EDGE))
+
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
+                         ((NSS) == SPI_NSS_HARD_INPUT) || \
+                         ((NSS) == SPI_NSS_HARD_OUTPUT))
+
+#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLE) || \
+                           ((NSSP) == SPI_NSS_PULSE_DISABLE))
+
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
+                                              ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
+                               ((BIT) == SPI_FIRSTBIT_LSB))
+
+#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLE) || \
+                             ((MODE) == SPI_TIMODE_ENABLE))
+
+#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLE) || \
+                                             ((CALCULATION) == SPI_CRCCALCULATION_ENABLE))
+
+#define IS_SPI_CRC_LENGTH(LENGTH) (((LENGTH) == SPI_CRC_LENGTH_DATASIZE) ||\
+                                   ((LENGTH) == SPI_CRC_LENGTH_8BIT)  ||   \
+                                   ((LENGTH) == SPI_CRC_LENGTH_16BIT))
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
+
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions SPI Exported Functions
+  * @{
+  */
+
+/** @addtogroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+/**
+  * @}
+  */
+
+/** @addtogroup SPI_Exported_Functions_Group2 IO operation functions
+  * @{
+  */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+/**
+  * @}
+  */
+
+/** @addtogroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions
+  * @{
+  */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t             HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_sram.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,690 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_sram.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   SRAM HAL module driver.
+  *          This file provides a generic firmware to drive SRAM memories  
+  *          mounted as external device.
+  *         
+  @verbatim
+  ==============================================================================
+                          ##### How to use this driver #####
+  ==============================================================================  
+  [..]
+    This driver is a generic layered driver which contains a set of APIs used to 
+    control SRAM memories. It uses the FMC layer functions to interface 
+    with SRAM devices.  
+    The following sequence should be followed to configure the FMC to interface
+    with SRAM/PSRAM memories: 
+      
+   (#) Declare a SRAM_HandleTypeDef handle structure, for example:
+          SRAM_HandleTypeDef  hsram; and: 
+          
+       (++) Fill the SRAM_HandleTypeDef handle "Init" field with the allowed 
+            values of the structure member.
+            
+       (++) Fill the SRAM_HandleTypeDef handle "Instance" field with a predefined 
+            base register instance for NOR or SRAM device 
+                         
+       (++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined
+            base register instance for NOR or SRAM extended mode 
+             
+   (#) Declare two FMC_NORSRAM_TimingTypeDef structures, for both normal and extended 
+       mode timings; for example:
+          FMC_NORSRAM_TimingTypeDef  Timing and FMC_NORSRAM_TimingTypeDef  ExTiming;
+      and fill its fields with the allowed values of the structure member.
+      
+   (#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function
+       performs the following sequence:
+          
+       (##) MSP hardware layer configuration using the function HAL_SRAM_MspInit()
+       (##) Control register configuration using the FMC NORSRAM interface function 
+            FMC_NORSRAM_Init()
+       (##) Timing register configuration using the FMC NORSRAM interface function 
+            FMC_NORSRAM_Timing_Init()
+       (##) Extended mode Timing register configuration using the FMC NORSRAM interface function 
+            FMC_NORSRAM_Extended_Timing_Init()
+       (##) Enable the SRAM device using the macro __FMC_NORSRAM_ENABLE()    
+
+   (#) At this stage you can perform read/write accesses from/to the memory connected 
+       to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the
+       following APIs:
+       (++) HAL_SRAM_Read()/HAL_SRAM_Write() for polling read/write access
+       (++) HAL_SRAM_Read_DMA()/HAL_SRAM_Write_DMA() for DMA read/write transfer
+       
+   (#) You can also control the SRAM device by calling the control APIs HAL_SRAM_WriteOperation_Enable()/
+       HAL_SRAM_WriteOperation_Disable() to respectively enable/disable the SRAM write operation  
+       
+   (#) You can continuously monitor the SRAM device HAL state by calling the function
+       HAL_SRAM_GetState()              
+                             
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SRAM SRAM 
+  * @brief SRAM driver modules
+  * @{
+  */
+#ifdef HAL_SRAM_MODULE_ENABLED
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/    
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Functions SRAM Exported Functions
+  * @{
+  */
+
+/** @defgroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief    Initialization and Configuration functions.
+  *
+  @verbatim    
+  ==============================================================================
+           ##### SRAM Initialization and de_initialization functions #####
+  ==============================================================================
+    [..]  This section provides functions allowing to initialize/de-initialize
+          the SRAM memory
+  
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Performs the SRAM device initialization sequence
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  Timing: Pointer to SRAM control timing structure 
+  * @param  ExtTiming: Pointer to SRAM extended mode timing structure  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming)
+{ 
+  /* Check the SRAM handle parameter */
+  if(hsram == NULL)
+  {
+     return HAL_ERROR;
+  }
+  
+  if(hsram->State == HAL_SRAM_STATE_RESET)
+  {  
+    /* Allocate lock resource and initialize it */
+    hsram->Lock = HAL_UNLOCKED;
+    /* Initialize the low level hardware (MSP) */
+    HAL_SRAM_MspInit(hsram);
+  }
+  
+  /* Initialize SRAM control Interface */
+  FMC_NORSRAM_Init(hsram->Instance, &(hsram->Init));
+
+  /* Initialize SRAM timing Interface */
+  FMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank); 
+
+  /* Initialize SRAM extended mode timing Interface */
+  FMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank,  hsram->Init.ExtendedMode);  
+  
+  /* Enable the NORSRAM device */
+  __FMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank); 
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Performs the SRAM device De-initialization sequence.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram)
+{ 
+  /* De-Initialize the low level hardware (MSP) */
+  HAL_SRAM_MspDeInit(hsram);
+   
+  /* Configure the SRAM registers with their reset values */
+  FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank);
+
+  hsram->State = HAL_SRAM_STATE_RESET;
+  
+  /* Release Lock */
+  __HAL_UNLOCK(hsram);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  SRAM MSP Init.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval None
+  */
+__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsram);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SRAM_MspInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  SRAM MSP DeInit.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval None
+  */
+__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hsram);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SRAM_MspDeInit could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  DMA transfer complete callback.
+  * @param  hdma: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval None
+  */
+__weak void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdma);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SRAM_DMA_XferCpltCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  DMA transfer complete error callback.
+  * @param  hdma: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval None
+  */
+__weak void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hdma);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SRAM_DMA_XferErrorCallback could be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SRAM_Exported_Functions_Group2 Input Output and memory control functions 
+  * @brief    Input Output and memory control functions 
+  *
+  @verbatim    
+  ==============================================================================
+                  ##### SRAM Input and Output functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to use and control the SRAM memory
+  
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Reads 8-bit buffer from SRAM memory. 
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer  
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize)
+{
+  __IO uint8_t * psramaddress = (uint8_t *)pAddress;
+  
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;  
+  
+  /* Read data from memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *pDstBuffer = *(__IO uint8_t *)psramaddress;
+    pDstBuffer++;
+    psramaddress++;
+  }
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;    
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram); 
+    
+  return HAL_OK;   
+}
+
+/**
+  * @brief  Writes 8-bit buffer to SRAM memory. 
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write  
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize)
+{
+  __IO uint8_t * psramaddress = (uint8_t *)pAddress;
+  
+  /* Check the SRAM controller state */
+  if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+  {
+    return  HAL_ERROR; 
+  }
+  
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY; 
+
+  /* Write data to memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *(__IO uint8_t *)psramaddress = *pSrcBuffer; 
+    pSrcBuffer++;
+    psramaddress++;    
+  }    
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY; 
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+    
+  return HAL_OK;   
+}
+
+/**
+  * @brief  Reads 16-bit buffer from SRAM memory. 
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer  
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize)
+{
+  __IO uint16_t * psramaddress = (uint16_t *)pAddress;
+  
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;  
+  
+  /* Read data from memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *pDstBuffer = *(__IO uint16_t *)psramaddress;
+    pDstBuffer++;
+    psramaddress++;
+  }
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;    
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram); 
+    
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Writes 16-bit buffer to SRAM memory. 
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write  
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize)
+{
+  __IO uint16_t * psramaddress = (uint16_t *)pAddress; 
+  
+  /* Check the SRAM controller state */
+  if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+  {
+    return  HAL_ERROR; 
+  }
+  
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY; 
+
+  /* Write data to memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *(__IO uint16_t *)psramaddress = *pSrcBuffer; 
+    pSrcBuffer++;
+    psramaddress++;    
+  }    
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY; 
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+    
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Reads 32-bit buffer from SRAM memory. 
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer  
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;  
+  
+  /* Read data from memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *pDstBuffer = *(__IO uint32_t *)pAddress;
+    pDstBuffer++;
+    pAddress++;
+  }
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;    
+
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram); 
+    
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Writes 32-bit buffer to SRAM memory. 
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write  
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+  /* Check the SRAM controller state */
+  if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+  {
+    return  HAL_ERROR; 
+  }
+  
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY; 
+
+  /* Write data to memory */
+  for(; BufferSize != 0; BufferSize--)
+  {
+    *(__IO uint32_t *)pAddress = *pSrcBuffer; 
+    pSrcBuffer++;
+    pAddress++;    
+  }    
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY; 
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);
+    
+  return HAL_OK;   
+}
+
+/**
+  * @brief  Reads a Words data from the SRAM memory using DMA transfer.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to read start address
+  * @param  pDstBuffer: Pointer to destination buffer  
+  * @param  BufferSize: Size of the buffer to read from memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsram);  
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;   
+  
+  /* Configure DMA user callbacks */
+  hsram->hdma->XferCpltCallback  = HAL_SRAM_DMA_XferCpltCallback;
+  hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;
+
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY; 
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);  
+  
+  return HAL_OK; 
+}
+
+/**
+  * @brief  Writes a Words data buffer to SRAM memory using DMA transfer.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @param  pAddress: Pointer to write start address
+  * @param  pSrcBuffer: Pointer to source buffer to write  
+  * @param  BufferSize: Size of the buffer to write to memory
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
+{
+  /* Check the SRAM controller state */
+  if(hsram->State == HAL_SRAM_STATE_PROTECTED)
+  {
+    return  HAL_ERROR; 
+  }
+  
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY; 
+  
+  /* Configure DMA user callbacks */
+  hsram->hdma->XferCpltCallback  = HAL_SRAM_DMA_XferCpltCallback;
+  hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;
+
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;  
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram);  
+  
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup SRAM_Exported_Functions_Group3 Control functions 
+ *  @brief   Control functions 
+ *
+@verbatim   
+  ==============================================================================
+                        ##### SRAM Control functions #####
+  ==============================================================================  
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the SRAM interface.
+
+@endverbatim
+  * @{
+  */
+    
+/**
+  * @brief  Enables dynamically SRAM write operation.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+
+  /* Enable write operation */
+  FMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank); 
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_READY;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram); 
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Disables dynamically SRAM write operation.
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram)
+{
+  /* Process Locked */
+  __HAL_LOCK(hsram);
+
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_BUSY;
+    
+  /* Disable write operation */
+  FMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank); 
+  
+  /* Update the SRAM controller state */
+  hsram->State = HAL_SRAM_STATE_PROTECTED;
+  
+  /* Process unlocked */
+  __HAL_UNLOCK(hsram); 
+  
+  return HAL_OK;  
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup SRAM_Exported_Functions_Group4 Peripheral State functions 
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### SRAM State functions #####
+  ==============================================================================  
+  [..]
+    This subsection permits to get in run-time the status of the SRAM controller 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Returns the SRAM controller state
+  * @param  hsram: pointer to a SRAM_HandleTypeDef structure that contains
+  *                the configuration information for SRAM module.
+  * @retval HAL state
+  */
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram)
+{
+  return hsram->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* HAL_SRAM_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_sram.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,195 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_sram.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of SRAM HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_SRAM_H
+#define __STM32F7xx_HAL_SRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_ll_fmc.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+/** @addtogroup SRAM
+  * @{
+  */ 
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Types SRAM Exported Types
+  * @{
+  */
+/** 
+  * @brief  HAL SRAM State structures definition  
+  */ 
+typedef enum
+{
+  HAL_SRAM_STATE_RESET     = 0x00,  /*!< SRAM not yet initialized or disabled           */
+  HAL_SRAM_STATE_READY     = 0x01,  /*!< SRAM initialized and ready for use             */
+  HAL_SRAM_STATE_BUSY      = 0x02,  /*!< SRAM internal process is ongoing               */
+  HAL_SRAM_STATE_ERROR     = 0x03,  /*!< SRAM error state                               */
+  HAL_SRAM_STATE_PROTECTED = 0x04   /*!< SRAM peripheral NORSRAM device write protected */
+  
+}HAL_SRAM_StateTypeDef;
+
+/** 
+  * @brief  SRAM handle Structure definition  
+  */ 
+typedef struct
+{
+  FMC_NORSRAM_TypeDef           *Instance;  /*!< Register base address                        */ 
+  
+  FMC_NORSRAM_EXTENDED_TypeDef  *Extended;  /*!< Extended mode register base address          */
+  
+  FMC_NORSRAM_InitTypeDef       Init;       /*!< SRAM device control configuration parameters */
+
+  HAL_LockTypeDef               Lock;       /*!< SRAM locking object                          */ 
+  
+  __IO HAL_SRAM_StateTypeDef    State;      /*!< SRAM device access state                     */
+  
+  DMA_HandleTypeDef             *hdma;      /*!< Pointer DMA handler                          */
+  
+}SRAM_HandleTypeDef; 
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Macros SRAM Exported Macros
+ * @{
+ */
+
+/** @brief Reset SRAM handle state
+  * @param  __HANDLE__: SRAM handle
+  * @retval None
+  */
+#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SRAM_Exported_Functions SRAM Exported Functions
+  * @{
+  */
+
+/** @addtogroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions  ********************************/
+HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram);
+
+/**
+  * @}
+  */
+
+/** @addtogroup SRAM_Exported_Functions_Group2 Input Output and memory control functions
+ * @{
+ */
+
+/* I/O operation functions  ***************************************************/
+HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+
+/**
+  * @}
+  */
+  
+/** @addtogroup SRAM_Exported_Functions_Group3 Control functions
+ * @{
+ */
+
+/* SRAM Control functions  ****************************************************/
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram);
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram);
+
+/**
+  * @}
+  */
+
+/** @addtogroup SRAM_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+
+/* SRAM  State functions ******************************************************/
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_SRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_tim.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,5521 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_tim.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   TIM HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Timer (TIM) peripheral:
+  *           + Time Base Initialization
+  *           + Time Base Start
+  *           + Time Base Start Interruption
+  *           + Time Base Start DMA
+  *           + Time Output Compare/PWM Initialization
+  *           + Time Output Compare/PWM Channel Configuration
+  *           + Time Output Compare/PWM  Start
+  *           + Time Output Compare/PWM  Start Interruption
+  *           + Time Output Compare/PWM Start DMA
+  *           + Time Input Capture Initialization
+  *           + Time Input Capture Channel Configuration
+  *           + Time Input Capture Start
+  *           + Time Input Capture Start Interruption 
+  *           + Time Input Capture Start DMA
+  *           + Time One Pulse Initialization
+  *           + Time One Pulse Channel Configuration
+  *           + Time One Pulse Start 
+  *           + Time Encoder Interface Initialization
+  *           + Time Encoder Interface Start
+  *           + Time Encoder Interface Start Interruption
+  *           + Time Encoder Interface Start DMA
+  *           + Commutation Event configuration with Interruption and DMA
+  *           + Time OCRef clear configuration
+  *           + Time External Clock configuration
+  @verbatim 
+  ==============================================================================
+                      ##### TIMER Generic features #####
+  ==============================================================================
+  [..] The Timer features include: 
+       (#) 16-bit up, down, up/down auto-reload counter.
+       (#) 16-bit programmable prescaler allowing dividing (also on the fly) the 
+           counter clock frequency either by any factor between 1 and 65536.
+       (#) Up to 4 independent channels for:
+           (++) Input Capture
+           (++) Output Compare
+           (++) PWM generation (Edge and Center-aligned Mode)
+           (++) One-pulse mode output               
+   
+                        ##### How to use this driver #####
+  ==============================================================================
+    [..]
+     (#) Initialize the TIM low level resources by implementing the following functions 
+         depending from feature used :
+           (++) Time Base : HAL_TIM_Base_MspInit() 
+           (++) Input Capture : HAL_TIM_IC_MspInit()
+           (++) Output Compare : HAL_TIM_OC_MspInit()
+           (++) PWM generation : HAL_TIM_PWM_MspInit()
+           (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+           (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
+           
+     (#) Initialize the TIM low level resources :
+        (##) Enable the TIM interface clock using __TIMx_CLK_ENABLE(); 
+        (##) TIM pins configuration
+            (+++) Enable the clock for the TIM GPIOs using the following function:
+                 __GPIOx_CLK_ENABLE();   
+            (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();  
+
+     (#) The external Clock can be configured, if needed (the default clock is the 
+         internal clock from the APBx), using the following function:
+         HAL_TIM_ConfigClockSource, the clock configuration should be done before 
+         any start function.
+  
+     (#) Configure the TIM in the desired functioning mode using one of the 
+         initialization function of this driver:
+         (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
+         (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an 
+              Output Compare signal.
+         (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a 
+              PWM signal.
+         (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an 
+              external signal.
+         (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer 
+              in One Pulse Mode.
+         (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
+         
+     (#) Activate the TIM peripheral using one of the start functions depending from the feature used: 
+           (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
+           (++) Input Capture :  HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
+           (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
+           (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
+           (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
+           (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
+
+     (#) The DMA Burst is managed with the two following functions:
+         HAL_TIM_DMABurst_WriteStart()
+         HAL_TIM_DMABurst_ReadStart()
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup TIM TIM
+  * @brief TIM HAL module driver
+  * @{
+  */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @addtogroup TIM_Private_Functions
+  * @{
+  */
+/* Private function prototypes -----------------------------------------------*/
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter);
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter);
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter);
+
+static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t TIM_ITRx);
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+                                     TIM_SlaveConfigTypeDef * sSlaveConfig);
+/**
+  * @}
+  */
+  
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Functions TIM Exported Functions
+  * @{
+  */
+
+/** @defgroup TIM_Exported_Functions_Group1 Time Base functions 
+ *  @brief    Time Base functions 
+ *
+@verbatim    
+  ==============================================================================
+              ##### Time Base functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM base. 
+    (+) De-initialize the TIM base.
+    (+) Start the Time Base.
+    (+) Stop the Time Base.
+    (+) Start the Time Base and enable interrupt.
+    (+) Stop the Time Base and disable interrupt.
+    (+) Start the Time Base and enable DMA transfer.
+    (+) Stop the Time Base and disable DMA transfer.
+ 
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Time base Unit according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
+{ 
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance)); 
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {  
+    /* Init the low level hardware : GPIO, CLOCK, NVIC */
+    HAL_TIM_Base_MspInit(htim);
+  }
+  
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+  
+  /* Set the Time Base configuration */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init); 
+  
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM Base peripheral 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
+{  
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+   
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+    
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIM_Base_MspDeInit(htim);
+  
+  /* Change TIM state */  
+  htim->State = HAL_TIM_STATE_RESET; 
+  
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Base MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_Base_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Base MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_Base_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Base generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+  
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Change the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Base generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Change the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Base generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  
+  /* Enable the TIM Update interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
+      
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+      
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Base generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  /* Disable the TIM Update interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
+      
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+    
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Base generation in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  pData: The source Buffer address.
+  * @param  Length: The length of data to be transferred from memory to peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_INSTANCE(htim->Instance)); 
+  
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((pData == 0 ) && (Length > 0)) 
+    {
+      return HAL_ERROR;                                    
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }  
+  /* Set the DMA Period elapsed callback */
+  htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+     
+  /* Set the DMA error callback */
+  htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+  /* Enable the DMA Stream */
+  HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
+  
+  /* Enable the TIM Update DMA request */
+  __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);  
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Base generation in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
+  
+  /* Disable the TIM Update DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
+      
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+    
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+      
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions 
+ *  @brief    Time Output Compare functions 
+ *
+@verbatim    
+  ==============================================================================
+                  ##### Time Output Compare functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM Output Compare. 
+    (+) De-initialize the TIM Output Compare.
+    (+) Start the Time Output Compare.
+    (+) Stop the Time Output Compare.
+    (+) Start the Time Output Compare and enable interrupt.
+    (+) Stop the Time Output Compare and disable interrupt.
+    (+) Start the Time Output Compare and enable DMA transfer.
+    (+) Stop the Time Output Compare and disable DMA transfer.
+ 
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Output Compare according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+ 
+  if(htim->State == HAL_TIM_STATE_RESET)
+  { 
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;  
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_OC_MspInit(htim);
+  }
+  
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+  
+  /* Init the base time for the Output Compare */  
+  TIM_Base_SetConfig(htim->Instance,  &htim->Init); 
+  
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM peripheral 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  
+   htim->State = HAL_TIM_STATE_BUSY;
+   
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_TIM_OC_MspDeInit(htim);
+    
+  /* Change TIM state */  
+  htim->State = HAL_TIM_STATE_RESET; 
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Output Compare MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_OC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Output Compare MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_OC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.  
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  /* Enable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+  
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim); 
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  /* Disable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }  
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);  
+  
+  /* Return function status */
+  return HAL_OK;
+}  
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  } 
+
+  /* Enable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+    
+    default:
+    break; 
+  } 
+  
+  /* Disable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); 
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);  
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData: The source Buffer address.
+  * @param  Length: The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if(((uint32_t)pData == 0 ) && (Length > 0)) 
+    {
+      return HAL_ERROR;                                    
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }    
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {      
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+      
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+      
+      /* Enable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+      
+      /* Enable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+     /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+      
+      /* Enable the TIM Capture/Compare 4 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  }
+
+  /* Enable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }  
+  
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim); 
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  } 
+  
+  /* Disable the Output compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions 
+ *  @brief    Time PWM functions 
+ *
+@verbatim    
+  ==============================================================================
+                          ##### Time PWM functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM OPWM. 
+    (+) De-initialize the TIM PWM.
+    (+) Start the Time PWM.
+    (+) Stop the Time PWM.
+    (+) Start the Time PWM and enable interrupt.
+    (+) Stop the Time PWM and disable interrupt.
+    (+) Start the Time PWM and enable DMA transfer.
+    (+) Stop the Time PWM and disable DMA transfer.
+ 
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM PWM Time Base according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;  
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_PWM_MspInit(htim);
+  }
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;  
+  
+  /* Init the base time for the PWM */  
+  TIM_Base_SetConfig(htim->Instance, &htim->Init); 
+   
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+  
+  return HAL_OK;
+}  
+
+/**
+  * @brief  DeInitializes the TIM peripheral 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+    
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_TIM_PWM_MspDeInit(htim);
+    
+  /* Change TIM state */  
+  htim->State = HAL_TIM_STATE_RESET; 
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM PWM MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_PWM_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM PWM MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_PWM_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the PWM signal generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+
+  /* Enable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+    
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Stops the PWM signal generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{ 
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+    
+  /* Disable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Starts the PWM signal generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  } 
+  
+  /* Enable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Stops the PWM signal generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+    
+    default:
+    break; 
+  }
+  
+  /* Disable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Starts the TIM PWM signal generation in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData: The source Buffer address.
+  * @param  Length: The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if(((uint32_t)pData == 0 ) && (Length > 0)) 
+    {
+      return HAL_ERROR;                                    
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }    
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {      
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+      
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+      
+      /* Enable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+      
+      /* Enable the TIM Output Capture/Compare 3 request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+     /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+      
+      /* Enable the TIM Capture/Compare 4 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  }
+
+  /* Enable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+    
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+  
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim); 
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM PWM signal generation in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  } 
+  
+  /* Disable the Capture compare channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions 
+ *  @brief    Time Input Capture functions 
+ *
+@verbatim    
+  ==============================================================================
+              ##### Time Input Capture functions #####
+  ==============================================================================
+ [..]  
+   This section provides functions allowing to:
+   (+) Initialize and configure the TIM Input Capture. 
+   (+) De-initialize the TIM Input Capture.
+   (+) Start the Time Input Capture.
+   (+) Stop the Time Input Capture.
+   (+) Start the Time Input Capture and enable interrupt.
+   (+) Stop the Time Input Capture and disable interrupt.
+   (+) Start the Time Input Capture and enable DMA transfer.
+   (+) Stop the Time Input Capture and disable DMA transfer.
+ 
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Input Capture Time base according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision)); 
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  { 
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;   
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_IC_MspInit(htim);
+  }
+  
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;   
+  
+  /* Init the base time for the input capture */  
+  TIM_Base_SetConfig(htim->Instance, &htim->Init); 
+   
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM peripheral 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+    
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
+  HAL_TIM_IC_MspDeInit(htim);
+    
+  /* Change TIM state */  
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM INput Capture MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_IC_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Input Capture MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+   
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_IC_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Input Capture measurement.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  /* Enable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+    
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);  
+
+  /* Return function status */
+  return HAL_OK;  
+} 
+
+/**
+  * @brief  Stops the TIM Input Capture measurement.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{ 
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  /* Disable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim); 
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Input Capture measurement in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  }  
+  /* Enable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+    
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);  
+
+  /* Return function status */
+  return HAL_OK;  
+} 
+
+/**
+  * @brief  Stops the TIM Input Capture measurement in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+    
+    default:
+    break; 
+  } 
+  
+  /* Disable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE); 
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim); 
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Input Capture measurement on in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData: The destination Buffer address.
+  * @param  Length: The length of data to be transferred from TIM peripheral to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+  
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((pData == 0 ) && (Length > 0)) 
+    {
+      return HAL_ERROR;                                    
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }  
+   
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length); 
+      
+      /* Enable the TIM Capture/Compare 1 DMA request */      
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
+      
+      /* Enable the TIM Capture/Compare 2  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
+      
+      /* Enable the TIM Capture/Compare 3  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
+      
+      /* Enable the TIM Capture/Compare 4  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  }
+
+  /* Enable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
+   
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim); 
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Input Capture measurement on in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3  DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4  DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  }
+
+  /* Disable the Input Capture channel */
+  TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim); 
+  
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}  
+/**
+  * @}
+  */
+  
+/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions 
+ *  @brief    Time One Pulse functions 
+ *
+@verbatim    
+  ==============================================================================
+                        ##### Time One Pulse functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM One Pulse. 
+    (+) De-initialize the TIM One Pulse.
+    (+) Start the Time One Pulse.
+    (+) Stop the Time One Pulse.
+    (+) Start the Time One Pulse and enable interrupt.
+    (+) Stop the Time One Pulse and disable interrupt.
+    (+) Start the Time One Pulse and enable DMA transfer.
+    (+) Stop the Time One Pulse and disable DMA transfer.
+ 
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM One Pulse Time Base according to the specified
+  *         parameters in the TIM_HandleTypeDef and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OnePulseMode: Select the One pulse mode.
+  *         This parameter can be one of the following values:
+  *            @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
+  *            @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
+{
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  assert_param(IS_TIM_OPM_MODE(OnePulseMode));
+  
+  if(htim->State == HAL_TIM_STATE_RESET)
+  { 
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;    
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_OnePulse_MspInit(htim);
+  }
+  
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;  
+  
+  /* Configure the Time base in the One Pulse Mode */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+  
+  /* Reset the OPM Bit */
+  htim->Instance->CR1 &= ~TIM_CR1_OPM;
+
+  /* Configure the OPM Mode */
+  htim->Instance->CR1 |= OnePulseMode;
+   
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM One Pulse  
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIM_OnePulse_MspDeInit(htim);
+    
+  /* Change TIM state */  
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM One Pulse MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_OnePulse_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM One Pulse MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel : TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Enable the Capture compare and the Input Capture channels 
+    (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+    if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+    if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output 
+    in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together 
+    
+    No need to enable the counter, it's enabled automatically by hardware 
+    (the counter starts in response to a stimulus and generate a pulse */
+  
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); 
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); 
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel : TIM Channels to be disable.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Disable the Capture compare and the Input Capture channels 
+  (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+  if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+  if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output 
+  in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
+  
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); 
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); 
+    
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+    
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim); 
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel : TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Enable the Capture compare and the Input Capture channels 
+    (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+    if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+    if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output 
+    in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together 
+    
+    No need to enable the counter, it's enabled automatically by hardware 
+    (the counter starts in response to a stimulus and generate a pulse */
+ 
+  /* Enable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+  
+  /* Enable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+  
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); 
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); 
+  
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Enable the main output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  }
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel : TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Disable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);  
+  
+  /* Disable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+  
+  /* Disable the Capture compare and the Input Capture channels 
+  (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
+  if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
+  if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output 
+  in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */  
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); 
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); 
+    
+  if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)  
+  {
+    /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  }
+    
+  /* Disable the Peripheral */
+   __HAL_TIM_DISABLE(htim);  
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions 
+ *  @brief    Time Encoder functions 
+ *
+@verbatim    
+  ==============================================================================
+                          ##### Time Encoder functions #####
+  ==============================================================================
+  [..]
+    This section provides functions allowing to:
+    (+) Initialize and configure the TIM Encoder. 
+    (+) De-initialize the TIM Encoder.
+    (+) Start the Time Encoder.
+    (+) Stop the Time Encoder.
+    (+) Start the Time Encoder and enable interrupt.
+    (+) Stop the Time Encoder and disable interrupt.
+    (+) Start the Time Encoder and enable DMA transfer.
+    (+) Stop the Time Encoder and disable DMA transfer.
+ 
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Encoder Interface and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sConfig: TIM Encoder Interface configuration structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim,  TIM_Encoder_InitTypeDef* sConfig)
+{
+  uint32_t tmpsmcr = 0;
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+  
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+   
+  /* Check the parameters */
+  assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
+  assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
+  assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
+  assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+  assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
+
+  if(htim->State == HAL_TIM_STATE_RESET)
+  { 
+    /* Allocate lock resource and initialize it */
+    htim->Lock = HAL_UNLOCKED;  
+    /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+    HAL_TIM_Encoder_MspInit(htim);
+  }
+  
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;   
+    
+  /* Reset the SMS bits */
+  htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+  
+  /* Configure the Time base in the Encoder Mode */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);  
+  
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = htim->Instance->SMCR;
+
+  /* Get the TIMx CCMR1 register value */
+  tmpccmr1 = htim->Instance->CCMR1;
+
+  /* Get the TIMx CCER register value */
+  tmpccer = htim->Instance->CCER;
+
+  /* Set the encoder Mode */
+  tmpsmcr |= sConfig->EncoderMode;
+
+  /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+  tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
+  tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8));
+  
+  /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
+  tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
+  tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
+  tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8);
+  tmpccmr1 |= (sConfig->IC1Filter << 4) | (sConfig->IC2Filter << 12);
+
+  /* Set the TI1 and the TI2 Polarities */
+  tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
+  tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
+  tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4);
+  
+  /* Write to TIMx SMCR */
+  htim->Instance->SMCR = tmpsmcr;
+
+  /* Write to TIMx CCMR1 */
+  htim->Instance->CCMR1 = tmpccmr1;
+
+  /* Write to TIMx CCER */
+  htim->Instance->CCER = tmpccer;
+  
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM Encoder interface  
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIM_Encoder_MspDeInit(htim);
+    
+  /* Change TIM state */  
+  htim->State = HAL_TIM_STATE_RESET;
+ 
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Encoder Interface MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_Encoder_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Encoder Interface MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Encoder Interface.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+  
+  /* Enable the encoder interface channels */
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      break; 
+    }
+    case TIM_CHANNEL_2:
+    { 
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE); 
+      break;
+    }  
+    default :
+    {
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+     break; 
+    }
+  }  
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Encoder Interface.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+    assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    
+   /* Disable the Input Capture channels 1 and 2
+    (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ 
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+      break; 
+    }
+    case TIM_CHANNEL_2:
+    { 
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); 
+      break;
+    }  
+    default :
+    {
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
+     break; 
+    }
+  }  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Encoder Interface in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+  
+  /* Enable the encoder interface channels */
+  /* Enable the capture compare Interrupts 1 and/or 2 */
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+      break; 
+    }
+    case TIM_CHANNEL_2:
+    { 
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2); 
+      break;
+    }  
+    default :
+    {
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+     TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+     __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+     __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+     break; 
+    }
+  }
+  
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Encoder Interface in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    
+  /* Disable the Input Capture channels 1 and 2
+    (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ 
+  if(Channel == TIM_CHANNEL_1)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); 
+    
+    /* Disable the capture compare Interrupts 1 */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+  }  
+  else if(Channel == TIM_CHANNEL_2)
+  {  
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); 
+    
+    /* Disable the capture compare Interrupts 2 */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+  }  
+  else
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); 
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); 
+    
+    /* Disable the capture compare Interrupts 1 and 2 */
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+  }
+    
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Encoder Interface in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @param  pData1: The destination Buffer address for IC1.
+  * @param  pData2: The destination Buffer address for IC2.
+  * @param  Length: The length of data to be transferred from TIM peripheral to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+  
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((((pData1 == 0) || (pData2 == 0) )) && (Length > 0)) 
+    {
+      return HAL_ERROR;                                    
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }  
+   
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length); 
+      
+      /* Enable the TIM Input Capture DMA request */      
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+            
+      /* Enable the Peripheral */
+      __HAL_TIM_ENABLE(htim);
+      
+      /* Enable the Capture compare channel */
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError;
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+      
+      /* Enable the TIM Input Capture  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+     
+      /* Enable the Peripheral */
+      __HAL_TIM_ENABLE(htim);
+      
+      /* Enable the Capture compare channel */
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+    }
+    break;
+    
+    case TIM_CHANNEL_ALL:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
+      
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
+          
+     /* Enable the Peripheral */
+      __HAL_TIM_ENABLE(htim);
+      
+      /* Enable the Capture compare channel */
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
+      TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
+      
+      /* Enable the TIM Input Capture  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+      /* Enable the TIM Input Capture  DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+    
+    default:
+    break;
+  }  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Encoder Interface in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
+  
+  /* Disable the Input Capture channels 1 and 2
+    (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */ 
+  if(Channel == TIM_CHANNEL_1)
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); 
+    
+    /* Disable the capture compare DMA Request 1 */
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+  }  
+  else if(Channel == TIM_CHANNEL_2)
+  {  
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); 
+    
+    /* Disable the capture compare DMA Request 2 */
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+  }  
+  else
+  {
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); 
+    TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE); 
+    
+    /* Disable the capture compare DMA Request 1 and 2 */
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+  }
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management 
+ *  @brief    IRQ handler management 
+ *
+@verbatim   
+  ==============================================================================
+                        ##### IRQ handler management #####
+  ==============================================================================  
+  [..]  
+    This section provides Timer IRQ handler function.
+               
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  This function handles TIM interrupts requests.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
+{
+  /* Capture compare 1 event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET)
+    {
+      {
+        __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
+        htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+        
+        /* Input capture event */
+        if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00)
+        {
+          HAL_TIM_IC_CaptureCallback(htim);
+        }
+        /* Output compare event */
+        else
+        {
+          HAL_TIM_OC_DelayElapsedCallback(htim);
+          HAL_TIM_PWM_PulseFinishedCallback(htim);
+        }
+        htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+      }
+    }
+  }
+  /* Capture compare 2 event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+      /* Input capture event */
+      if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00)
+      {          
+        HAL_TIM_IC_CaptureCallback(htim);
+      }
+      /* Output compare event */
+      else
+      {
+        HAL_TIM_OC_DelayElapsedCallback(htim);
+        HAL_TIM_PWM_PulseFinishedCallback(htim);
+      }
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+    }
+  }
+  /* Capture compare 3 event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+      /* Input capture event */
+      if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00)
+      {          
+        HAL_TIM_IC_CaptureCallback(htim);
+      }
+      /* Output compare event */
+      else
+      {
+        HAL_TIM_OC_DelayElapsedCallback(htim);
+        HAL_TIM_PWM_PulseFinishedCallback(htim); 
+      }
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+    }
+  }
+  /* Capture compare 4 event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+      /* Input capture event */
+      if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00)
+      {          
+        HAL_TIM_IC_CaptureCallback(htim);
+      }
+      /* Output compare event */
+      else
+      {
+        HAL_TIM_OC_DelayElapsedCallback(htim);
+        HAL_TIM_PWM_PulseFinishedCallback(htim);
+      }
+      htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+    }
+  }
+  /* TIM Update event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
+      HAL_TIM_PeriodElapsedCallback(htim);
+    }
+  }
+  /* TIM Break input event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
+      HAL_TIMEx_BreakCallback(htim);
+    }
+  }
+  
+    /* TIM Break input event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK2) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
+      HAL_TIMEx_BreakCallback(htim);
+    }
+  }
+
+  /* TIM Trigger detection event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
+      HAL_TIM_TriggerCallback(htim);
+    }
+  }
+  /* TIM commutation event */
+  if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
+  {
+    if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) !=RESET)
+    {
+      __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM);
+      HAL_TIMEx_CommutationCallback(htim);
+    }
+  }
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ *  @brief   	Peripheral Control functions 
+ *
+@verbatim   
+  ==============================================================================
+                   ##### Peripheral Control functions #####
+  ==============================================================================  
+ [..] 
+   This section provides functions allowing to:
+   (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. 
+   (+) Configure External Clock source.
+   (+) Configure Complementary channels, break features and dead time.
+   (+) Configure Master and the Slave synchronization.
+   (+) Configure the DMA Burst Mode.
+      
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Initializes the TIM Output Compare Channels according to the specified
+  *         parameters in the TIM_OC_InitTypeDef.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sConfig: TIM Output Compare configuration structure
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected 
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+  /* Check the parameters */ 
+  assert_param(IS_TIM_CHANNELS(Channel)); 
+  assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+  assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+  
+  /* Check input state */
+  __HAL_LOCK(htim); 
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      /* Configure the TIM Channel 1 in Output Compare */
+      TIM_OC1_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      /* Configure the TIM Channel 2 in Output Compare */
+      TIM_OC2_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+       assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+      /* Configure the TIM Channel 3 in Output Compare */
+      TIM_OC3_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+      /* Configure the TIM Channel 4 in Output Compare */
+      TIM_OC4_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+    
+    default:
+    break;    
+  }
+  htim->State = HAL_TIM_STATE_READY;
+  
+  __HAL_UNLOCK(htim); 
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Input Capture Channels according to the specified
+  *         parameters in the TIM_IC_InitTypeDef.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sConfig: TIM Input Capture configuration structure
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
+  assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
+  assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
+  
+  __HAL_LOCK(htim);
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  if (Channel == TIM_CHANNEL_1)
+  {
+    /* TI1 Configuration */
+    TIM_TI1_SetConfig(htim->Instance,
+               sConfig->ICPolarity,
+               sConfig->ICSelection,
+               sConfig->ICFilter);
+               
+    /* Reset the IC1PSC Bits */
+    htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+    /* Set the IC1PSC value */
+    htim->Instance->CCMR1 |= sConfig->ICPrescaler;
+  }
+  else if (Channel == TIM_CHANNEL_2)
+  {
+    /* TI2 Configuration */
+    assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    
+    TIM_TI2_SetConfig(htim->Instance, 
+                      sConfig->ICPolarity,
+                      sConfig->ICSelection,
+                      sConfig->ICFilter);
+               
+    /* Reset the IC2PSC Bits */
+    htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+    /* Set the IC2PSC value */
+    htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8);
+  }
+  else if (Channel == TIM_CHANNEL_3)
+  {
+    /* TI3 Configuration */
+    assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+    
+    TIM_TI3_SetConfig(htim->Instance,  
+               sConfig->ICPolarity,
+               sConfig->ICSelection,
+               sConfig->ICFilter);
+               
+    /* Reset the IC3PSC Bits */
+    htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
+
+    /* Set the IC3PSC value */
+    htim->Instance->CCMR2 |= sConfig->ICPrescaler;
+  }
+  else
+  {
+    /* TI4 Configuration */
+    assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+    
+    TIM_TI4_SetConfig(htim->Instance, 
+               sConfig->ICPolarity,
+               sConfig->ICSelection,
+               sConfig->ICFilter);
+               
+    /* Reset the IC4PSC Bits */
+    htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
+
+    /* Set the IC4PSC value */
+    htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8);
+  }
+  
+  htim->State = HAL_TIM_STATE_READY;
+    
+  __HAL_UNLOCK(htim);
+  
+  return HAL_OK; 
+}
+
+/**
+  * @brief  Initializes the TIM PWM  channels according to the specified
+  *         parameters in the TIM_OC_InitTypeDef.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sConfig: TIM PWM configuration structure
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+__weak HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{
+  __HAL_LOCK(htim);
+  
+  /* Check the parameters */ 
+  assert_param(IS_TIM_CHANNELS(Channel)); 
+  assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+  assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+  assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode)); 
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+    
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      /* Configure the Channel 1 in PWM mode */
+      TIM_OC1_SetConfig(htim->Instance, sConfig);
+      
+      /* Set the Preload enable bit for channel1 */
+      htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+      
+      /* Configure the Output Fast mode */
+      htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+      htim->Instance->CCMR1 |= sConfig->OCFastMode;
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      /* Configure the Channel 2 in PWM mode */
+      TIM_OC2_SetConfig(htim->Instance, sConfig);
+      
+      /* Set the Preload enable bit for channel2 */
+      htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+      
+      /* Configure the Output Fast mode */
+      htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+      htim->Instance->CCMR1 |= sConfig->OCFastMode << 8;
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+      /* Configure the Channel 3 in PWM mode */
+      TIM_OC3_SetConfig(htim->Instance, sConfig);
+      
+      /* Set the Preload enable bit for channel3 */
+      htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+      
+     /* Configure the Output Fast mode */
+      htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+      htim->Instance->CCMR2 |= sConfig->OCFastMode;  
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+      /* Configure the Channel 4 in PWM mode */
+      TIM_OC4_SetConfig(htim->Instance, sConfig);
+      
+      /* Set the Preload enable bit for channel4 */
+      htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+      
+     /* Configure the Output Fast mode */
+      htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+      htim->Instance->CCMR2 |= sConfig->OCFastMode << 8;  
+    }
+    break;
+    
+    default:
+    break;    
+  }
+  
+  htim->State = HAL_TIM_STATE_READY;
+    
+  __HAL_UNLOCK(htim);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM One Pulse Channels according to the specified
+  *         parameters in the TIM_OnePulse_InitTypeDef.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sConfig: TIM One Pulse configuration structure
+  * @param  OutputChannel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @param  InputChannel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim,  TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel,  uint32_t InputChannel)
+{
+  TIM_OC_InitTypeDef temp1;
+  
+  /* Check the parameters */
+  assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
+  assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
+
+  if(OutputChannel != InputChannel)  
+  {
+    __HAL_LOCK(htim);
+  
+    htim->State = HAL_TIM_STATE_BUSY;
+
+    /* Extract the Output compare configuration from sConfig structure */  
+    temp1.OCMode = sConfig->OCMode;
+    temp1.Pulse = sConfig->Pulse;
+    temp1.OCPolarity = sConfig->OCPolarity;
+    temp1.OCNPolarity = sConfig->OCNPolarity;
+    temp1.OCIdleState = sConfig->OCIdleState;
+    temp1.OCNIdleState = sConfig->OCNIdleState; 
+    
+    switch (OutputChannel)
+    {
+      case TIM_CHANNEL_1:
+      {
+        assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      
+        TIM_OC1_SetConfig(htim->Instance, &temp1); 
+      }
+      break;
+      case TIM_CHANNEL_2:
+      {
+        assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      
+        TIM_OC2_SetConfig(htim->Instance, &temp1);
+      }
+      break;
+      default:
+      break;  
+    } 
+    switch (InputChannel)
+    {
+      case TIM_CHANNEL_1:
+      {
+        assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      
+        TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
+                        sConfig->ICSelection, sConfig->ICFilter);
+               
+        /* Reset the IC1PSC Bits */
+        htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+
+        /* Select the Trigger source */
+        htim->Instance->SMCR &= ~TIM_SMCR_TS;
+        htim->Instance->SMCR |= TIM_TS_TI1FP1;
+      
+        /* Select the Slave Mode */      
+        htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+        htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+      }
+      break;
+      case TIM_CHANNEL_2:
+      {
+        assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      
+        TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
+                 sConfig->ICSelection, sConfig->ICFilter);
+               
+        /* Reset the IC2PSC Bits */
+        htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
+
+        /* Select the Trigger source */
+        htim->Instance->SMCR &= ~TIM_SMCR_TS;
+        htim->Instance->SMCR |= TIM_TS_TI2FP2;
+      
+        /* Select the Slave Mode */      
+        htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+        htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
+      }
+      break;
+    
+      default:
+      break;  
+    }
+  
+    htim->State = HAL_TIM_STATE_READY;
+    
+    __HAL_UNLOCK(htim);
+  
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_ERROR;
+  }
+} 
+
+/**
+  * @brief  Configure the DMA Burst to transfer Data from the memory to the TIM peripheral  
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  BurstBaseAddress: TIM Base address from when the DMA will starts the Data write.
+  *         This parameters can be on of the following values:
+  *            @arg TIM_DMABASE_CR1  
+  *            @arg TIM_DMABASE_CR2
+  *            @arg TIM_DMABASE_SMCR
+  *            @arg TIM_DMABASE_DIER
+  *            @arg TIM_DMABASE_SR
+  *            @arg TIM_DMABASE_EGR
+  *            @arg TIM_DMABASE_CCMR1
+  *            @arg TIM_DMABASE_CCMR2
+  *            @arg TIM_DMABASE_CCER
+  *            @arg TIM_DMABASE_CNT   
+  *            @arg TIM_DMABASE_PSC   
+  *            @arg TIM_DMABASE_ARR
+  *            @arg TIM_DMABASE_RCR
+  *            @arg TIM_DMABASE_CCR1
+  *            @arg TIM_DMABASE_CCR2
+  *            @arg TIM_DMABASE_CCR3  
+  *            @arg TIM_DMABASE_CCR4
+  *            @arg TIM_DMABASE_BDTR
+  *            @arg TIM_DMABASE_DCR
+  * @param  BurstRequestSrc: TIM DMA Request sources.
+  *         This parameters can be on of the following values:
+  *            @arg TIM_DMA_UPDATE: TIM update Interrupt source
+  *            @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+  *            @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+  *            @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+  *            @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+  *            @arg TIM_DMA_COM: TIM Commutation DMA source
+  *            @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+  * @param  BurstBuffer: The Buffer address.
+  * @param  BurstLength: DMA Burst length. This parameter can be one value
+  *         between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+                                              uint32_t* BurstBuffer, uint32_t  BurstLength)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+  assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+  
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((BurstBuffer == 0 ) && (BurstLength > 0)) 
+    {
+      return HAL_ERROR;                                    
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  switch(BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1); 
+    }
+    break;
+    case TIM_DMA_CC1:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);     
+    }
+    break;
+    case TIM_DMA_CC2:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);     
+    }
+    break;
+    case TIM_DMA_CC3:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);     
+    }
+    break;
+    case TIM_DMA_CC4:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);     
+    }
+    break;
+    case TIM_DMA_COM:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = HAL_TIMEx_DMACommutationCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);     
+    }
+    break;
+    case TIM_DMA_TRIGGER:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);     
+    }
+    break;
+    default:
+    break;  
+  }
+   /* configure the DMA Burst Mode */
+   htim->Instance->DCR = BurstBaseAddress | BurstLength;  
+   
+   /* Enable the TIM DMA Request */
+   __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);  
+   
+   htim->State = HAL_TIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM DMA Burst mode 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  BurstRequestSrc: TIM DMA Request sources to disable
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+  
+  /* Abort the DMA transfer (at least disable the DMA channel) */
+  switch(BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+    }
+    break;
+    case TIM_DMA_CC1:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+    }
+    break;
+    case TIM_DMA_CC2:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+    }
+    break;
+    case TIM_DMA_CC3:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+    }
+    break;
+    case TIM_DMA_CC4:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+    }
+    break;
+    case TIM_DMA_COM:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+    }
+    break;
+    case TIM_DMA_TRIGGER:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+    }
+    break;
+    default:
+    break;
+  }
+
+  /* Disable the TIM Update DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+      
+  /* Return function status */
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Configure the DMA Burst to transfer Data from the TIM peripheral to the memory 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  BurstBaseAddress: TIM Base address from when the DMA will starts the Data read.
+  *         This parameters can be on of the following values:
+  *            @arg TIM_DMABASE_CR1  
+  *            @arg TIM_DMABASE_CR2
+  *            @arg TIM_DMABASE_SMCR
+  *            @arg TIM_DMABASE_DIER
+  *            @arg TIM_DMABASE_SR
+  *            @arg TIM_DMABASE_EGR
+  *            @arg TIM_DMABASE_CCMR1
+  *            @arg TIM_DMABASE_CCMR2
+  *            @arg TIM_DMABASE_CCER
+  *            @arg TIM_DMABASE_CNT   
+  *            @arg TIM_DMABASE_PSC   
+  *            @arg TIM_DMABASE_ARR
+  *            @arg TIM_DMABASE_RCR
+  *            @arg TIM_DMABASE_CCR1
+  *            @arg TIM_DMABASE_CCR2
+  *            @arg TIM_DMABASE_CCR3  
+  *            @arg TIM_DMABASE_CCR4
+  *            @arg TIM_DMABASE_BDTR
+  *            @arg TIM_DMABASE_DCR
+  * @param  BurstRequestSrc: TIM DMA Request sources.
+  *         This parameters can be on of the following values:
+  *            @arg TIM_DMA_UPDATE: TIM update Interrupt source
+  *            @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+  *            @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+  *            @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+  *            @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+  *            @arg TIM_DMA_COM: TIM Commutation DMA source
+  *            @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
+  * @param  BurstBuffer: The Buffer address.
+  * @param  BurstLength: DMA Burst length. This parameter can be one value
+  *         between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
+                                             uint32_t  *BurstBuffer, uint32_t  BurstLength)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+  assert_param(IS_TIM_DMA_LENGTH(BurstLength));
+  
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if((BurstBuffer == 0 ) && (BurstLength > 0)) 
+    {
+      return HAL_ERROR;                                    
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }  
+  switch(BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+       HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);     
+    }
+    break;
+    case TIM_DMA_CC1:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);      
+    }
+    break;
+    case TIM_DMA_CC2:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);     
+    }
+    break;
+    case TIM_DMA_CC3:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);      
+    }
+    break;
+    case TIM_DMA_CC4:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMACaptureCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);      
+    }
+    break;
+    case TIM_DMA_COM:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = HAL_TIMEx_DMACommutationCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);      
+    }
+    break;
+    case TIM_DMA_TRIGGER:
+    {  
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);      
+    }
+    break;
+    default:
+    break;  
+  }
+
+  /* configure the DMA Burst Mode */
+  htim->Instance->DCR = BurstBaseAddress | BurstLength;  
+  
+  /* Enable the TIM DMA Request */
+  __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
+  
+  htim->State = HAL_TIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stop the DMA burst reading 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  BurstRequestSrc: TIM DMA Request sources to disable.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
+  
+  /* Abort the DMA transfer (at least disable the DMA channel) */
+  switch(BurstRequestSrc)
+  {
+    case TIM_DMA_UPDATE:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
+    }
+    break;
+    case TIM_DMA_CC1:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
+    }
+    break;
+    case TIM_DMA_CC2:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
+    }
+    break;
+    case TIM_DMA_CC3:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
+    }
+    break;
+    case TIM_DMA_CC4:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
+    }
+    break;
+    case TIM_DMA_COM:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
+    }
+    break;
+    case TIM_DMA_TRIGGER:
+    {  
+      HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
+    }
+    break;
+    default:
+    break;  
+  }
+  
+  /* Disable the TIM Update DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
+      
+  /* Return function status */
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Generate a software event
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  EventSource: specifies the event source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
+  *            @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
+  *            @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
+  *            @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
+  *            @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
+  *            @arg TIM_EVENTSOURCE_COM: Timer COM event source  
+  *            @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
+  *            @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
+  *            @arg TIM_EVENTSOURCE_BREAK2: Timer Break2 event source  
+  * @note   TIM6 and TIM7 can only generate an update event. 
+  * @note   TIM_EVENTSOURCE_COM, TIM_EVENTSOURCE_BREAK and TIM_EVENTSOURCE_BREAK2 are used only with TIM1 and TIM8.
+  * @retval HAL status
+  */ 
+
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_EVENT_SOURCE(EventSource));
+  
+  /* Process Locked */
+  __HAL_LOCK(htim);
+  
+  /* Change the TIM state */
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  /* Set the event sources */
+  htim->Instance->EGR = EventSource;
+  
+  /* Change the TIM state */
+  htim->State = HAL_TIM_STATE_READY;
+  
+  __HAL_UNLOCK(htim);
+  
+  /* Return function status */
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Configures the OCRef clear feature
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sClearInputConfig: pointer to a TIM_ClearInputConfigTypeDef structure that
+  *         contains the OCREF clear feature and parameters for the TIM peripheral. 
+  * @param  Channel: specifies the TIM Channel.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */ 
+__weak HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel)
+{ 
+  /* Check the parameters */
+  assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_CHANNELS(Channel));
+  assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+   
+  /* Process Locked */
+  __HAL_LOCK(htim);
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  if(sClearInputConfig->ClearInputSource == TIM_CLEARINPUTSOURCE_ETR)
+  {
+    assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+    assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+    assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+  
+    TIM_ETR_SetConfig(htim->Instance, 
+                      sClearInputConfig->ClearInputPrescaler,
+                      sClearInputConfig->ClearInputPolarity,
+                      sClearInputConfig->ClearInputFilter);
+  }
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {        
+      if(sClearInputConfig->ClearInputState != RESET)  
+      {
+        /* Enable the Ocref clear feature for Channel 1 */
+        htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+      }
+      else
+      {
+        /* Disable the Ocref clear feature for Channel 1 */
+        htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;      
+      }
+    }    
+    break;
+    case TIM_CHANNEL_2:    
+    { 
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); 
+      if(sClearInputConfig->ClearInputState != RESET)  
+      {
+        /* Enable the Ocref clear feature for Channel 2 */
+        htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+      }
+      else
+      {
+        /* Disable the Ocref clear feature for Channel 2 */
+        htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;      
+      }
+    } 
+    break;
+    case TIM_CHANNEL_3:   
+    {  
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+      if(sClearInputConfig->ClearInputState != RESET)  
+      {
+        /* Enable the Ocref clear feature for Channel 3 */
+        htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+      }
+      else
+      {
+        /* Disable the Ocref clear feature for Channel 3 */
+        htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;      
+      }
+    } 
+    break;
+    case TIM_CHANNEL_4:    
+    {  
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+      if(sClearInputConfig->ClearInputState != RESET)  
+      {
+        /* Enable the Ocref clear feature for Channel 4 */
+        htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+      }
+      else
+      {
+        /* Disable the Ocref clear feature for Channel 4 */
+        htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;      
+      }
+    } 
+    break;
+    default:  
+    break;
+  } 
+
+  htim->State = HAL_TIM_STATE_READY;
+  
+  __HAL_UNLOCK(htim);
+  
+  return HAL_OK;  
+}  
+
+/**
+  * @brief   Configures the clock source to be used
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sClockSourceConfig: pointer to a TIM_ClockConfigTypeDef structure that
+  *         contains the clock source information for the TIM peripheral. 
+  * @retval HAL status
+  */ 
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig)    
+{
+  uint32_t tmpsmcr = 0;
+    
+  /* Process Locked */
+  __HAL_LOCK(htim);
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  /* Check the parameters */
+  assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
+  
+  /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
+  tmpsmcr = htim->Instance->SMCR;
+  tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+  tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+  htim->Instance->SMCR = tmpsmcr;
+  
+  switch (sClockSourceConfig->ClockSource)
+  {
+    case TIM_CLOCKSOURCE_INTERNAL:
+    { 
+      assert_param(IS_TIM_INSTANCE(htim->Instance));      
+      /* Disable slave mode to clock the prescaler directly with the internal clock */
+      htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+    }
+    break;
+    
+    case TIM_CLOCKSOURCE_ETRMODE1:
+    {
+      assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+      /* Configure the ETR Clock source */
+      TIM_ETR_SetConfig(htim->Instance, 
+                        sClockSourceConfig->ClockPrescaler, 
+                        sClockSourceConfig->ClockPolarity, 
+                        sClockSourceConfig->ClockFilter);
+      /* Get the TIMx SMCR register value */
+      tmpsmcr = htim->Instance->SMCR;
+      /* Reset the SMS and TS Bits */
+      tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
+      /* Select the External clock mode1 and the ETRF trigger */
+      tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
+      /* Write to TIMx SMCR */
+      htim->Instance->SMCR = tmpsmcr;
+    }
+    break;
+    
+    case TIM_CLOCKSOURCE_ETRMODE2:
+    {
+      assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+      
+      /* Configure the ETR Clock source */
+      TIM_ETR_SetConfig(htim->Instance, 
+                        sClockSourceConfig->ClockPrescaler, 
+                        sClockSourceConfig->ClockPolarity,
+                        sClockSourceConfig->ClockFilter);
+      /* Enable the External clock mode2 */
+      htim->Instance->SMCR |= TIM_SMCR_ECE;
+    }
+    break;
+    
+    case TIM_CLOCKSOURCE_TI1:
+    {
+      assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+  
+      /* Check TI1 input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+      TIM_TI1_ConfigInputStage(htim->Instance, 
+                        sClockSourceConfig->ClockPolarity, 
+                        sClockSourceConfig->ClockFilter);
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
+    }
+    break;
+    case TIM_CLOCKSOURCE_TI2:
+    {
+      assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+      
+      /* Check TI1 input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+
+      TIM_TI2_ConfigInputStage(htim->Instance, 
+                        sClockSourceConfig->ClockPolarity, 
+                        sClockSourceConfig->ClockFilter);
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
+    }
+    break;
+    case TIM_CLOCKSOURCE_TI1ED:
+    {
+      assert_param(IS_TIM_CLOCKSOURCE_TIX_INSTANCE(htim->Instance));
+      /* Check TI1 input conditioning related parameters */
+      assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
+      assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
+  
+      TIM_TI1_ConfigInputStage(htim->Instance, 
+                        sClockSourceConfig->ClockPolarity,
+                        sClockSourceConfig->ClockFilter);
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
+    }
+    break;
+    case TIM_CLOCKSOURCE_ITR0:
+    {
+      assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
+    }
+    break;
+    case TIM_CLOCKSOURCE_ITR1:
+    {
+      assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
+    }
+    break;
+    case TIM_CLOCKSOURCE_ITR2:
+    {
+      assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
+    }
+    break;
+    case TIM_CLOCKSOURCE_ITR3:
+    {
+      assert_param(IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(htim->Instance));
+      TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
+    }
+    break;
+    
+    default:
+    break;    
+  }
+  htim->State = HAL_TIM_STATE_READY;
+  
+  __HAL_UNLOCK(htim);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Selects the signal connected to the TI1 input: direct from CH1_input
+  *         or a XOR combination between CH1_input, CH2_input & CH3_input
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  TI1_Selection: Indicate whether or not channel 1 is connected to the
+  *         output of a XOR gate.
+  *         This parameter can be one of the following values:
+  *            @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
+  *            @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
+  *            pins are connected to the TI1 input (XOR combination)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
+{
+  uint32_t tmpcr2 = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance)); 
+  assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
+
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = htim->Instance->CR2;
+
+  /* Reset the TI1 selection */
+  tmpcr2 &= ~TIM_CR2_TI1S;
+
+  /* Set the TI1 selection */
+  tmpcr2 |= TI1_Selection;
+  
+  /* Write to TIMxCR2 */
+  htim->Instance->CR2 = tmpcr2;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the TIM in Slave mode
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
+  *         contains the selected trigger (internal trigger input, filtered
+  *         timer input or external trigger input) and the ) and the Slave 
+  *         mode (Disable, Reset, Gated, Trigger, External clock mode 1). 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+  uint32_t tmpsmcr  = 0;
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+  assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+   
+  __HAL_LOCK(htim);
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = htim->Instance->SMCR;
+
+  /* Reset the Trigger Selection Bits */
+  tmpsmcr &= ~TIM_SMCR_TS;
+  /* Set the Input Trigger source */
+  tmpsmcr |= sSlaveConfig->InputTrigger;
+
+  /* Reset the slave mode Bits */
+  tmpsmcr &= ~TIM_SMCR_SMS;
+  /* Set the slave mode */
+  tmpsmcr |= sSlaveConfig->SlaveMode;
+
+  /* Write to TIMx SMCR */
+  htim->Instance->SMCR = tmpsmcr;
+  
+  /* Configure the trigger prescaler, filter, and polarity */
+  switch (sSlaveConfig->InputTrigger)
+  {
+  case TIM_TS_ETRF:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+      /* Configure the ETR Trigger source */
+      TIM_ETR_SetConfig(htim->Instance, 
+                        sSlaveConfig->TriggerPrescaler, 
+                        sSlaveConfig->TriggerPolarity, 
+                        sSlaveConfig->TriggerFilter);
+    }
+    break;
+    
+  case TIM_TS_TI1F_ED:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+      
+      /* Disable the Channel 1: Reset the CC1E Bit */
+      tmpccer = htim->Instance->CCER;
+      htim->Instance->CCER &= ~TIM_CCER_CC1E;
+      tmpccmr1 = htim->Instance->CCMR1;    
+      
+      /* Set the filter */
+      tmpccmr1 &= ~TIM_CCMR1_IC1F;
+      tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4);
+      
+      /* Write to TIMx CCMR1 and CCER registers */
+      htim->Instance->CCMR1 = tmpccmr1;
+      htim->Instance->CCER = tmpccer;                               
+                               
+    }
+    break;
+    
+  case TIM_TS_TI1FP1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+      /* Configure TI1 Filter and Polarity */
+      TIM_TI1_ConfigInputStage(htim->Instance,
+                               sSlaveConfig->TriggerPolarity,
+                               sSlaveConfig->TriggerFilter);
+    }
+    break;
+    
+  case TIM_TS_TI2FP2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+      
+      /* Configure TI2 Filter and Polarity */
+      TIM_TI2_ConfigInputStage(htim->Instance,
+                                sSlaveConfig->TriggerPolarity,
+                                sSlaveConfig->TriggerFilter);
+    }
+    break;
+    
+  case TIM_TS_ITR0:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+    
+  case TIM_TS_ITR1:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+    
+  case TIM_TS_ITR2:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+    
+  case TIM_TS_ITR3:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+       
+  default:
+    break;
+  }
+  
+  htim->State = HAL_TIM_STATE_READY;
+     
+  __HAL_UNLOCK(htim);  
+  
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Configures the TIM in Slave mode in interrupt mode
+  * @param  htim: TIM handle.
+  * @param  sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
+  *         contains the selected trigger (internal trigger input, filtered
+  *         timer input or external trigger input) and the ) and the Slave 
+  *         mode (Disable, Reset, Gated, Trigger, External clock mode 1). 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, 
+                                                        TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
+  assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
+  
+  __HAL_LOCK(htim);
+
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
+  
+  /* Enable Trigger Interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
+  
+  /* Disable Trigger DMA request */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
+  
+  htim->State = HAL_TIM_STATE_READY;
+     
+  __HAL_UNLOCK(htim);  
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Read the captured value from Capture Compare unit
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channels to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval Captured value
+  */
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpreg = 0;
+  
+  __HAL_LOCK(htim);
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      
+      /* Return the capture 1 value */
+      tmpreg = htim->Instance->CCR1;
+      
+      break;
+    }
+    case TIM_CHANNEL_2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      
+      /* Return the capture 2 value */
+      tmpreg = htim->Instance->CCR2;
+      
+      break;
+    }
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
+      
+      /* Return the capture 3 value */
+      tmpreg = htim->Instance->CCR3;
+      
+      break;
+    }
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
+      
+      /* Return the capture 4 value */
+      tmpreg = htim->Instance->CCR4;
+      
+      break;
+    }
+    
+    default:
+    break;  
+  }
+     
+  __HAL_UNLOCK(htim);  
+  return tmpreg;
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ *  @brief    TIM Callbacks functions 
+ *
+@verbatim   
+  ==============================================================================
+                        ##### TIM Callbacks functions #####
+  ==============================================================================  
+ [..]  
+   This section provides TIM callback functions:
+   (+) Timer Period elapsed callback
+   (+) Timer Output Compare callback
+   (+) Timer Input capture callback
+   (+) Timer Trigger callback
+   (+) Timer Error callback
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Period elapsed callback in non blocking mode 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
+   */
+  
+}
+/**
+  * @brief  Output Compare callback in non blocking mode 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
+   */
+}
+/**
+  * @brief  Input Capture callback in non blocking mode 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  PWM Pulse finished callback in non blocking mode 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Hall Trigger detection callback in non blocking mode 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_TriggerCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Timer error callback in non blocking mode 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIM_ErrorCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions 
+ *  @brief   Peripheral State functions 
+ *
+@verbatim   
+  ==============================================================================
+                        ##### Peripheral State functions #####
+  ==============================================================================  
+  [..]
+    This subsection permits to get in run-time the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the TIM Base state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM OC state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM PWM state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM Input Capture state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM One Pulse Mode state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @brief  Return the TIM Encoder Mode state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  TIM DMA error callback 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  htim->State= HAL_TIM_STATE_READY;
+   
+  HAL_TIM_ErrorCallback(htim);
+}
+
+/**
+  * @brief  TIM DMA Delay Pulse complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  htim->State= HAL_TIM_STATE_READY; 
+  
+  if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+  }
+
+  HAL_TIM_PWM_PulseFinishedCallback(htim);
+
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+}
+/**
+  * @brief  TIM DMA Capture complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+    
+   htim->State= HAL_TIM_STATE_READY; 
+    
+  if (hdma == htim->hdma[TIM_DMA_ID_CC1])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC2])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC3])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
+  }
+  else if (hdma == htim->hdma[TIM_DMA_ID_CC4])
+  {
+    htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
+  }
+  
+  HAL_TIM_IC_CaptureCallback(htim); 
+  
+  htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
+
+}
+
+/**
+  * @brief  TIM DMA Period Elapse complete callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  htim->State= HAL_TIM_STATE_READY;
+  
+  HAL_TIM_PeriodElapsedCallback(htim);
+}
+
+/**
+  * @brief  TIM DMA Trigger callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;  
+  
+  htim->State= HAL_TIM_STATE_READY; 
+  
+  HAL_TIM_TriggerCallback(htim);
+}
+
+/**
+  * @brief  Time Base configuration
+  * @param  TIMx: TIM peripheral
+  * @param  Structure: pointer on TIM Time Base required parameters  
+  * @retval None
+  */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
+{
+  uint32_t tmpcr1 = 0;
+  tmpcr1 = TIMx->CR1;
+  
+  /* Set TIM Time Base Unit parameters ---------------------------------------*/
+  if(IS_TIM_CC3_INSTANCE(TIMx) != RESET)   
+  {
+    /* Select the Counter Mode */
+    tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
+    tmpcr1 |= Structure->CounterMode;
+  }
+ 
+  if(IS_TIM_CC1_INSTANCE(TIMx) != RESET)  
+  {
+    /* Set the clock division */
+    tmpcr1 &= ~TIM_CR1_CKD;
+    tmpcr1 |= (uint32_t)Structure->ClockDivision;
+  }
+
+  TIMx->CR1 = tmpcr1;
+
+  /* Set the Auto-reload value */
+  TIMx->ARR = (uint32_t)Structure->Period ;
+ 
+  /* Set the Prescaler value */
+  TIMx->PSC = (uint32_t)Structure->Prescaler;
+    
+  if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)  
+  {
+    /* Set the Repetition Counter value */
+    TIMx->RCR = Structure->RepetitionCounter;
+  }
+
+  /* Generate an update event to reload the Prescaler 
+     and the repetition counter(only for TIM1 and TIM8) value immediately */
+  TIMx->EGR = TIM_EGR_UG;
+}
+
+/**
+  * @brief  Time Output Compare 1 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config: The output configuration structure
+  * @retval None
+  */
+void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0;  
+
+  /* Disable the Channel 1: Reset the CC1E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC1E;
+  
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = TIMx->CR2;
+  
+  /* Get the TIMx CCMR1 register value */
+  tmpccmrx = TIMx->CCMR1;
+    
+  /* Reset the Output Compare Mode Bits */
+  tmpccmrx &= ~TIM_CCMR1_OC1M;
+  tmpccmrx &= ~TIM_CCMR1_CC1S;
+  /* Select the Output Compare Mode */
+  tmpccmrx |= OC_Config->OCMode;
+  
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC1P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= OC_Config->OCPolarity;
+
+    
+  if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+  {   
+    /* Reset the Output N Polarity level */
+    tmpccer &= ~TIM_CCER_CC1NP;
+    /* Set the Output N Polarity */
+    tmpccer |= OC_Config->OCNPolarity;
+    /* Reset the Output N State */
+    tmpccer &= ~TIM_CCER_CC1NE;
+    
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS1;
+    tmpcr2 &= ~TIM_CR2_OIS1N;
+    /* Set the Output Idle state */
+    tmpcr2 |= OC_Config->OCIdleState;
+    /* Set the Output N Idle state */
+    tmpcr2 |= OC_Config->OCNIdleState;
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+  
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmrx;
+  
+  /* Set the Capture Compare Register value */
+  TIMx->CCR1 = OC_Config->Pulse;
+  
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;  
+} 
+
+/**
+  * @brief  Time Output Compare 2 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config: The output configuration structure
+  * @retval None
+  */
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0;
+   
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC2E;
+  
+  /* Get the TIMx CCER register value */  
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = TIMx->CR2;
+  
+  /* Get the TIMx CCMR1 register value */
+  tmpccmrx = TIMx->CCMR1;
+    
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= ~TIM_CCMR1_OC2M;
+  tmpccmrx &= ~TIM_CCMR1_CC2S;
+  
+  /* Select the Output Compare Mode */
+  tmpccmrx |= (OC_Config->OCMode << 8);
+  
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC2P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 4);
+    
+  if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+  {
+    assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+    
+    /* Reset the Output N Polarity level */
+    tmpccer &= ~TIM_CCER_CC2NP;
+    /* Set the Output N Polarity */
+    tmpccer |= (OC_Config->OCNPolarity << 4);
+    /* Reset the Output N State */
+    tmpccer &= ~TIM_CCER_CC2NE;
+    
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS2;
+    tmpcr2 &= ~TIM_CR2_OIS2N;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 2);
+    /* Set the Output N Idle state */
+    tmpcr2 |= (OC_Config->OCNIdleState << 2);
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+  
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmrx;
+  
+  /* Set the Capture Compare Register value */
+  TIMx->CCR2 = OC_Config->Pulse;
+  
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Time Output Compare 3 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config: The output configuration structure
+  * @retval None
+  */
+void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0;   
+
+  /* Disable the Channel 3: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC3E;
+  
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = TIMx->CR2;
+  
+  /* Get the TIMx CCMR2 register value */
+  tmpccmrx = TIMx->CCMR2;
+    
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= ~TIM_CCMR2_OC3M;
+  tmpccmrx &= ~TIM_CCMR2_CC3S;  
+  /* Select the Output Compare Mode */
+  tmpccmrx |= OC_Config->OCMode;
+  
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC3P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 8);
+    
+  if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+  {
+    assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
+    
+    /* Reset the Output N Polarity level */
+    tmpccer &= ~TIM_CCER_CC3NP;
+    /* Set the Output N Polarity */
+    tmpccer |= (OC_Config->OCNPolarity << 8);
+    /* Reset the Output N State */
+    tmpccer &= ~TIM_CCER_CC3NE;
+    
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS3;
+    tmpcr2 &= ~TIM_CR2_OIS3N;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 4);
+    /* Set the Output N Idle state */
+    tmpcr2 |= (OC_Config->OCNIdleState << 4);
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+  
+  /* Write to TIMx CCMR2 */
+  TIMx->CCMR2 = tmpccmrx;
+  
+  /* Set the Capture Compare Register value */
+  TIMx->CCR3 = OC_Config->Pulse;
+  
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Time Output Compare 4 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config: The output configuration structure
+  * @retval None
+  */
+void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0;
+
+  /* Disable the Channel 4: Reset the CC4E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC4E;
+  
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 = TIMx->CR2;
+  
+  /* Get the TIMx CCMR2 register value */
+  tmpccmrx = TIMx->CCMR2;
+    
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= ~TIM_CCMR2_OC4M;
+  tmpccmrx &= ~TIM_CCMR2_CC4S;
+  
+  /* Select the Output Compare Mode */
+  tmpccmrx |= (OC_Config->OCMode << 8);
+  
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC4P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 12);
+   
+  /*if((TIMx == TIM1) || (TIMx == TIM8))*/
+  if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
+  {
+    assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
+    /* Reset the Output Compare IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS4;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 6);
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+  
+  /* Write to TIMx CCMR2 */  
+  TIMx->CCMR2 = tmpccmrx;
+    
+  /* Set the Capture Compare Register value */
+  TIMx->CCR4 = OC_Config->Pulse;
+  
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Time Output Compare 4 configuration
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sSlaveConfig: The slave configuration structure
+  * @retval None
+  */
+static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
+                              TIM_SlaveConfigTypeDef * sSlaveConfig)
+{
+  uint32_t tmpsmcr = 0;
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+ /* Get the TIMx SMCR register value */
+  tmpsmcr = htim->Instance->SMCR;
+
+  /* Reset the Trigger Selection Bits */
+  tmpsmcr &= ~TIM_SMCR_TS;
+  /* Set the Input Trigger source */
+  tmpsmcr |= sSlaveConfig->InputTrigger;
+
+  /* Reset the slave mode Bits */
+  tmpsmcr &= ~TIM_SMCR_SMS;
+  /* Set the slave mode */
+  tmpsmcr |= sSlaveConfig->SlaveMode;
+
+  /* Write to TIMx SMCR */
+  htim->Instance->SMCR = tmpsmcr;
+ 
+  /* Configure the trigger prescaler, filter, and polarity */
+  switch (sSlaveConfig->InputTrigger)
+  {
+  case TIM_TS_ETRF:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+      /* Configure the ETR Trigger source */
+      TIM_ETR_SetConfig(htim->Instance, 
+                        sSlaveConfig->TriggerPrescaler, 
+                        sSlaveConfig->TriggerPolarity, 
+                        sSlaveConfig->TriggerFilter);
+    }
+    break;
+    
+  case TIM_TS_TI1F_ED:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+  
+      /* Disable the Channel 1: Reset the CC1E Bit */
+      tmpccer = htim->Instance->CCER;
+      htim->Instance->CCER &= ~TIM_CCER_CC1E;
+      tmpccmr1 = htim->Instance->CCMR1;    
+      
+      /* Set the filter */
+      tmpccmr1 &= ~TIM_CCMR1_IC1F;
+      tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4);
+      
+      /* Write to TIMx CCMR1 and CCER registers */
+      htim->Instance->CCMR1 = tmpccmr1;
+      htim->Instance->CCER = tmpccer;                               
+                               
+    }
+    break;
+    
+  case TIM_TS_TI1FP1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+
+      /* Configure TI1 Filter and Polarity */
+      TIM_TI1_ConfigInputStage(htim->Instance,
+                               sSlaveConfig->TriggerPolarity,
+                               sSlaveConfig->TriggerFilter);
+    }
+    break;
+    
+  case TIM_TS_TI2FP2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+      assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
+      assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
+  
+      /* Configure TI2 Filter and Polarity */
+      TIM_TI2_ConfigInputStage(htim->Instance,
+                                sSlaveConfig->TriggerPolarity,
+                                sSlaveConfig->TriggerFilter);
+    }
+    break;
+    
+  case TIM_TS_ITR0:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+    
+  case TIM_TS_ITR1:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+    
+  case TIM_TS_ITR2:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+    
+  case TIM_TS_ITR3:
+    {
+      /* Check the parameter */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
+    }
+    break;
+       
+  default:
+    break;
+  }
+}
+
+/**
+  * @brief  Configure the TI1 as Input.
+  * @param  TIMx to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPolarity_Rising
+  *            @arg TIM_ICPolarity_Falling
+  *            @arg TIM_ICPolarity_BothEdge  
+  * @param  TIM_ICSelection: specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
+  *            @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
+  *            @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None  
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1 
+  *       (on channel2 path) is used as the input signal. Therefore CCMR1 must be 
+  *        protected against un-initialized filter and polarity values.  
+  */
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 1: Reset the CC1E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC1E;
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
+  {
+    tmpccmr1 &= ~TIM_CCMR1_CC1S;
+    tmpccmr1 |= TIM_ICSelection;
+  } 
+  else
+  {
+    tmpccmr1 |= TIM_CCMR1_CC1S_0;
+  }
+  
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC1F;
+  tmpccmr1 |= ((TIM_ICFilter << 4) & TIM_CCMR1_IC1F);
+
+  /* Select the Polarity and set the CC1E Bit */
+  tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+  tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the Polarity and Filter for TI1.
+  * @param  TIMx to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPolarity_Rising
+  *            @arg TIM_ICPolarity_Falling
+  *            @arg TIM_ICPolarity_BothEdge
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  */
+static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+  
+  /* Disable the Channel 1: Reset the CC1E Bit */
+  tmpccer = TIMx->CCER;
+  TIMx->CCER &= ~TIM_CCER_CC1E;
+  tmpccmr1 = TIMx->CCMR1;    
+  
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC1F;
+  tmpccmr1 |= (TIM_ICFilter << 4);
+  
+  /* Select the Polarity and set the CC1E Bit */
+  tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
+  tmpccer |= TIM_ICPolarity;
+  
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI2 as Input.
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPolarity_Rising
+  *            @arg TIM_ICPolarity_Falling
+  *            @arg TIM_ICPolarity_BothEdge   
+  * @param  TIM_ICSelection: specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
+  *            @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
+  *            @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2 
+  *       (on channel1 path) is used as the input signal. Therefore CCMR1 must be 
+  *        protected against un-initialized filter and polarity values.  
+  */
+static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC2E;
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  tmpccmr1 &= ~TIM_CCMR1_CC2S;
+  tmpccmr1 |= (TIM_ICSelection << 8);
+
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC2F;
+  tmpccmr1 |= ((TIM_ICFilter << 12) & TIM_CCMR1_IC2F);
+
+  /* Select the Polarity and set the CC2E Bit */
+  tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+  tmpccer |= ((TIM_ICPolarity << 4) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1 ;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the Polarity and Filter for TI2.
+  * @param  TIMx to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPolarity_Rising
+  *            @arg TIM_ICPolarity_Falling
+  *            @arg TIM_ICPolarity_BothEdge
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  */
+static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
+{
+uint32_t tmpccmr1 = 0;
+  uint32_t tmpccer = 0;
+  
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC2E;
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+  
+  /* Set the filter */
+  tmpccmr1 &= ~TIM_CCMR1_IC2F;
+  tmpccmr1 |= (TIM_ICFilter << 12);
+
+  /* Select the Polarity and set the CC2E Bit */
+  tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
+  tmpccer |= (TIM_ICPolarity << 4);
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1 ;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI3 as Input.
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPolarity_Rising
+  *            @arg TIM_ICPolarity_Falling
+  *            @arg TIM_ICPolarity_BothEdge         
+  * @param  TIM_ICSelection: specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
+  *            @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
+  *            @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4 
+  *       (on channel1 path) is used as the input signal. Therefore CCMR2 must be 
+  *        protected against un-initialized filter and polarity values.  
+  */
+static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr2 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 3: Reset the CC3E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC3E;
+  tmpccmr2 = TIMx->CCMR2;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  tmpccmr2 &= ~TIM_CCMR2_CC3S;
+  tmpccmr2 |= TIM_ICSelection;
+
+  /* Set the filter */
+  tmpccmr2 &= ~TIM_CCMR2_IC3F;
+  tmpccmr2 |= ((TIM_ICFilter << 4) & TIM_CCMR2_IC3F);
+
+  /* Select the Polarity and set the CC3E Bit */
+  tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
+  tmpccer |= ((TIM_ICPolarity << 8) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
+
+  /* Write to TIMx CCMR2 and CCER registers */
+  TIMx->CCMR2 = tmpccmr2;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI4 as Input.
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPolarity_Rising
+  *            @arg TIM_ICPolarity_Falling
+  *            @arg TIM_ICPolarity_BothEdge     
+  * @param  TIM_ICSelection: specifies the input to be used.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
+  *            @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
+  *            @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *          This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3 
+  *       (on channel1 path) is used as the input signal. Therefore CCMR2 must be 
+  *        protected against un-initialized filter and polarity values.  
+  */
+static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
+                       uint32_t TIM_ICFilter)
+{
+  uint32_t tmpccmr2 = 0;
+  uint32_t tmpccer = 0;
+
+  /* Disable the Channel 4: Reset the CC4E Bit */
+  TIMx->CCER &= ~TIM_CCER_CC4E;
+  tmpccmr2 = TIMx->CCMR2;
+  tmpccer = TIMx->CCER;
+
+  /* Select the Input */
+  tmpccmr2 &= ~TIM_CCMR2_CC4S;
+  tmpccmr2 |= (TIM_ICSelection << 8);
+
+  /* Set the filter */
+  tmpccmr2 &= ~TIM_CCMR2_IC4F;
+  tmpccmr2 |= ((TIM_ICFilter << 12) & TIM_CCMR2_IC4F);
+
+  /* Select the Polarity and set the CC4E Bit */
+  tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
+  tmpccer |= ((TIM_ICPolarity << 12) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
+
+  /* Write to TIMx CCMR2 and CCER registers */
+  TIMx->CCMR2 = tmpccmr2;
+  TIMx->CCER = tmpccer ;
+}
+
+/**
+  * @brief  Selects the Input Trigger source
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ITRx: The Input Trigger source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0: Internal Trigger 0
+  *            @arg TIM_TS_ITR1: Internal Trigger 1
+  *            @arg TIM_TS_ITR2: Internal Trigger 2
+  *            @arg TIM_TS_ITR3: Internal Trigger 3
+  *            @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+  *            @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+  *            @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+  *            @arg TIM_TS_ETRF: External Trigger input
+  * @retval None
+  */
+static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t TIM_ITRx)
+{
+  uint32_t tmpsmcr = 0;
+  
+   /* Get the TIMx SMCR register value */
+   tmpsmcr = TIMx->SMCR;
+   /* Reset the TS Bits */
+   tmpsmcr &= ~TIM_SMCR_TS;
+   /* Set the Input Trigger source and the slave mode*/
+   tmpsmcr |= TIM_ITRx | TIM_SLAVEMODE_EXTERNAL1;
+   /* Write to TIMx SMCR */
+   TIMx->SMCR = tmpsmcr;
+}
+
+/**
+  * @brief  Configures the TIMx External Trigger (ETR).
+  * @param  TIMx to select the TIM peripheral
+  * @param  TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ExtTRGPSC_DIV1: ETRP Prescaler OFF.
+  *            @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+  *            @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+  *            @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+  * @param  TIM_ExtTRGPolarity: The external Trigger Polarity.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+  *            @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+  * @param  ExtTRGFilter: External Trigger Filter.
+  *          This parameter must be a value between 0x00 and 0x0F
+  * @retval None
+  */
+void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+                       uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
+{
+  uint32_t tmpsmcr = 0;
+
+  tmpsmcr = TIMx->SMCR;
+
+  /* Reset the ETR Bits */
+  tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+
+  /* Set the Prescaler, the Filter value and the Polarity */
+  tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8)));
+
+  /* Write to TIMx SMCR */
+  TIMx->SMCR = tmpsmcr;
+} 
+
+/**
+  * @brief  Enables or disables the TIM Capture Compare Channel x.
+  * @param  TIMx to select the TIM peripheral
+  * @param  Channel: specifies the TIM Channel
+  *          This parameter can be one of the following values:
+  *            @arg TIM_Channel_1: TIM Channel 1
+  *            @arg TIM_Channel_2: TIM Channel 2
+  *            @arg TIM_Channel_3: TIM Channel 3
+  *            @arg TIM_Channel_4: TIM Channel 4
+  * @param  ChannelState: specifies the TIM Channel CCxE bit new state.
+  *          This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable. 
+  * @retval None
+  */
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
+{
+  uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CC1_INSTANCE(TIMx)); 
+  assert_param(IS_TIM_CHANNELS(Channel));
+
+  tmp = TIM_CCER_CC1E << Channel;
+
+  /* Reset the CCxE Bit */
+  TIMx->CCER &= ~tmp;
+
+  /* Set or reset the CCxE Bit */ 
+  TIMx->CCER |= (uint32_t)(ChannelState << Channel);
+}
+
+
+/**
+  * @}
+  */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_tim.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1546 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_tim.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of TIM HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_TIM_H
+#define __STM32F7xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup TIM
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+  * @{
+  */
+  
+/** 
+  * @brief  TIM Time base Configuration Structure definition  
+  */
+typedef struct
+{
+  uint32_t Prescaler;         /*!< Specifies the prescaler value used to divide the TIM clock.
+                                   This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t CounterMode;       /*!< Specifies the counter mode.
+                                   This parameter can be a value of @ref TIM_Counter_Mode */
+
+  uint32_t Period;            /*!< Specifies the period value to be loaded into the active
+                                   Auto-Reload Register at the next update event.
+                                   This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.  */
+
+  uint32_t ClockDivision;     /*!< Specifies the clock division.
+                                   This parameter can be a value of @ref TIM_ClockDivision */
+
+  uint32_t RepetitionCounter;  /*!< Specifies the repetition counter value. Each time the RCR downcounter
+                                    reaches zero, an update event is generated and counting restarts
+                                    from the RCR value (N).
+                                    This means in PWM mode that (N+1) corresponds to:
+                                        - the number of PWM periods in edge-aligned mode
+                                        - the number of half PWM period in center-aligned mode
+                                     This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. 
+                                     @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_Base_InitTypeDef;
+
+/** 
+  * @brief  TIM Output Compare Configuration Structure definition  
+  */
+
+typedef struct
+{
+  uint32_t OCMode;        /*!< Specifies the TIM mode.
+                               This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+  uint32_t Pulse;         /*!< Specifies the pulse value to be loaded into the Capture Compare Register. 
+                               This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t OCPolarity;    /*!< Specifies the output polarity.
+                               This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+  uint32_t OCNPolarity;   /*!< Specifies the complementary output polarity.
+                               This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+                               @note This parameter is valid only for TIM1 and TIM8. */
+  
+  uint32_t OCFastMode;   /*!< Specifies the Fast mode state.
+                               This parameter can be a value of @ref TIM_Output_Fast_State
+                               @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+  uint32_t OCIdleState;   /*!< Specifies the TIM Output Compare pin state during Idle state.
+                               This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+                               @note This parameter is valid only for TIM1 and TIM8. */
+
+  uint32_t OCNIdleState;  /*!< Specifies the TIM Output Compare pin state during Idle state.
+                               This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+                               @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;  
+
+/** 
+  * @brief  TIM One Pulse Mode Configuration Structure definition  
+  */
+typedef struct
+{
+  uint32_t OCMode;        /*!< Specifies the TIM mode.
+                               This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+  uint32_t Pulse;         /*!< Specifies the pulse value to be loaded into the Capture Compare Register. 
+                               This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+  uint32_t OCPolarity;    /*!< Specifies the output polarity.
+                               This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+  uint32_t OCNPolarity;   /*!< Specifies the complementary output polarity.
+                               This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+                               @note This parameter is valid only for TIM1 and TIM8. */
+
+  uint32_t OCIdleState;   /*!< Specifies the TIM Output Compare pin state during Idle state.
+                               This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+                               @note This parameter is valid only for TIM1 and TIM8. */
+
+  uint32_t OCNIdleState;  /*!< Specifies the TIM Output Compare pin state during Idle state.
+                               This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+                               @note This parameter is valid only for TIM1 and TIM8. */
+
+  uint32_t ICPolarity;    /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t ICSelection;   /*!< Specifies the input.
+                              This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint32_t ICFilter;      /*!< Specifies the input capture filter.
+                              This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  
+} TIM_OnePulse_InitTypeDef;  
+
+
+/** 
+  * @brief  TIM Input Capture Configuration Structure definition  
+  */
+
+typedef struct
+{
+  uint32_t  ICPolarity;   /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t ICSelection;  /*!< Specifies the input.
+                              This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint32_t ICPrescaler;  /*!< Specifies the Input Capture Prescaler.
+                              This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t ICFilter;     /*!< Specifies the input capture filter.
+                              This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/** 
+  * @brief  TIM Encoder Configuration Structure definition  
+  */
+
+typedef struct
+{
+  uint32_t EncoderMode;   /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Encoder_Mode */
+                                  
+  uint32_t IC1Polarity;   /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t IC1Selection;  /*!< Specifies the input.
+                               This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint32_t IC1Prescaler;  /*!< Specifies the Input Capture Prescaler.
+                               This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t IC1Filter;     /*!< Specifies the input capture filter.
+                               This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+                                  
+  uint32_t IC2Polarity;   /*!< Specifies the active edge of the input signal.
+                               This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint32_t IC2Selection;  /*!< Specifies the input.
+                              This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint32_t IC2Prescaler;  /*!< Specifies the Input Capture Prescaler.
+                               This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint32_t IC2Filter;     /*!< Specifies the input capture filter.
+                               This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+/** 
+  * @brief  Clock Configuration Handle Structure definition  
+  */ 
+typedef struct
+{
+  uint32_t ClockSource;     /*!< TIM clock sources. 
+                                 This parameter can be a value of @ref TIM_Clock_Source */ 
+  uint32_t ClockPolarity;   /*!< TIM clock polarity. 
+                                 This parameter can be a value of @ref TIM_Clock_Polarity */
+  uint32_t ClockPrescaler;  /*!< TIM clock prescaler. 
+                                 This parameter can be a value of @ref TIM_Clock_Prescaler */
+  uint32_t ClockFilter;    /*!< TIM clock filter. 
+                                This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClockConfigTypeDef;
+
+/** 
+  * @brief  Clear Input Configuration Handle Structure definition  
+  */ 
+typedef struct
+{ 
+  uint32_t ClearInputState;      /*!< TIM clear Input state. 
+                                      This parameter can be ENABLE or DISABLE */  
+  uint32_t ClearInputSource;     /*!< TIM clear Input sources. 
+                                      This parameter can be a value of @ref TIMEx_ClearInput_Source */ 
+  uint32_t ClearInputPolarity;   /*!< TIM Clear Input polarity. 
+                                      This parameter can be a value of @ref TIM_ClearInput_Polarity */
+  uint32_t ClearInputPrescaler;  /*!< TIM Clear Input prescaler. 
+                                      This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+  uint32_t ClearInputFilter;    /*!< TIM Clear Input filter. 
+                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClearInputConfigTypeDef;
+
+/** 
+  * @brief  TIM Slave configuration Structure definition  
+  */ 
+typedef struct {
+  uint32_t  SlaveMode;         /*!< Slave mode selection 
+                                  This parameter can be a value of @ref TIMEx_Slave_Mode */ 
+  uint32_t  InputTrigger;      /*!< Input Trigger source 
+                                  This parameter can be a value of @ref TIM_Trigger_Selection */
+  uint32_t  TriggerPolarity;   /*!< Input Trigger polarity 
+                                  This parameter can be a value of @ref TIM_Trigger_Polarity */
+  uint32_t  TriggerPrescaler;  /*!< Input trigger prescaler 
+                                  This parameter can be a value of @ref TIM_Trigger_Prescaler */
+  uint32_t  TriggerFilter;     /*!< Input trigger filter 
+                                  This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  
+
+}TIM_SlaveConfigTypeDef;
+
+/** 
+  * @brief  HAL State structures definition  
+  */ 
+typedef enum
+{
+  HAL_TIM_STATE_RESET             = 0x00,    /*!< Peripheral not yet initialized or disabled  */
+  HAL_TIM_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use    */
+  HAL_TIM_STATE_BUSY              = 0x02,    /*!< An internal process is ongoing              */
+  HAL_TIM_STATE_TIMEOUT           = 0x03,    /*!< Timeout state                               */
+  HAL_TIM_STATE_ERROR             = 0x04     /*!< Reception process is ongoing                */
+}HAL_TIM_StateTypeDef;
+
+/** 
+  * @brief  HAL Active channel structures definition  
+  */ 
+typedef enum
+{
+  HAL_TIM_ACTIVE_CHANNEL_1        = 0x01,    /*!< The active channel is 1     */
+  HAL_TIM_ACTIVE_CHANNEL_2        = 0x02,    /*!< The active channel is 2     */
+  HAL_TIM_ACTIVE_CHANNEL_3        = 0x04,    /*!< The active channel is 3     */
+  HAL_TIM_ACTIVE_CHANNEL_4        = 0x08,    /*!< The active channel is 4     */
+  HAL_TIM_ACTIVE_CHANNEL_CLEARED  = 0x00     /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/** 
+  * @brief  TIM Time Base Handle Structure definition  
+  */ 
+typedef struct
+{
+  TIM_TypeDef                 *Instance;     /*!< Register base address             */
+  TIM_Base_InitTypeDef        Init;          /*!< TIM Time Base required parameters */
+  HAL_TIM_ActiveChannel       Channel;       /*!< Active channel                    */
+  DMA_HandleTypeDef           *hdma[7];      /*!< DMA Handlers array
+                                             This array is accessed by a @ref DMA_Handle_index */
+  HAL_LockTypeDef             Lock;          /*!< Locking object                    */
+  __IO HAL_TIM_StateTypeDef   State;         /*!< TIM operation state               */
+}TIM_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants  TIM Exported Constants
+  * @{
+  */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity
+  * @{
+  */
+#define  TIM_INPUTCHANNELPOLARITY_RISING      ((uint32_t)0x00000000)            /*!< Polarity for TIx source */
+#define  TIM_INPUTCHANNELPOLARITY_FALLING     (TIM_CCER_CC1P)                   /*!< Polarity for TIx source */
+#define  TIM_INPUTCHANNELPOLARITY_BOTHEDGE    (TIM_CCER_CC1P | TIM_CCER_CC1NP)  /*!< Polarity for TIx source */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ETR_Polarity  TIM ETR Polarity
+  * @{
+  */
+#define TIM_ETRPOLARITY_INVERTED              (TIM_SMCR_ETP)                    /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED           ((uint32_t)0x0000)                /*!< Polarity for ETR source */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ETR_Prescaler  TIM ETR Prescaler
+  * @{
+  */
+#define TIM_ETRPRESCALER_DIV1                 ((uint32_t)0x0000)                /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2                 (TIM_SMCR_ETPS_0)                 /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4                 (TIM_SMCR_ETPS_1)                 /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8                 (TIM_SMCR_ETPS)                   /*!< ETR input source is divided by 8 */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Counter_Mode  TIM Counter Mode
+  * @{
+  */
+#define TIM_COUNTERMODE_UP                 ((uint32_t)0x0000)
+#define TIM_COUNTERMODE_DOWN               TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1     TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2     TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3     TIM_CR1_CMS
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+  * @{
+  */
+#define TIM_CLOCKDIVISION_DIV1                       ((uint32_t)0x0000)
+#define TIM_CLOCKDIVISION_DIV2                       (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4                       (TIM_CR1_CKD_1)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_State TIM Output Compare State
+  * @{
+  */
+#define TIM_OUTPUTSTATE_DISABLE            ((uint32_t)0x0000)
+#define TIM_OUTPUTSTATE_ENABLE             (TIM_CCER_CC1E)
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Fast_State  TIM Output Fast State 
+  * @{
+  */
+#define TIM_OCFAST_DISABLE                ((uint32_t)0x0000)
+#define TIM_OCFAST_ENABLE                 (TIM_CCMR1_OC1FE)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State
+  * @{
+  */
+#define TIM_OUTPUTNSTATE_DISABLE            ((uint32_t)0x0000)
+#define TIM_OUTPUTNSTATE_ENABLE             (TIM_CCER_CC1NE)
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity 
+  * @{
+  */
+#define TIM_OCPOLARITY_HIGH                ((uint32_t)0x0000)
+#define TIM_OCPOLARITY_LOW                 (TIM_CCER_CC1P)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
+  * @{
+  */
+#define TIM_OCNPOLARITY_HIGH               ((uint32_t)0x0000)
+#define TIM_OCNPOLARITY_LOW                (TIM_CCER_CC1NP)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_Idle_State  TIM Output Compare Idle State
+  * @{
+  */
+#define TIM_OCIDLESTATE_SET                (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET              ((uint32_t)0x0000)
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Output_Compare_N_Idle_State  TIM Output Compare N Idle State
+  * @{
+  */
+#define TIM_OCNIDLESTATE_SET               (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET             ((uint32_t)0x0000)
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Input_Capture_Polarity  TIM Input Capture Polarity 
+  * @{
+  */
+#define  TIM_ICPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING
+#define  TIM_ICPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING
+#define  TIM_ICPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Input_Capture_Selection  TIM Input Capture Selection
+  * @{
+  */
+#define TIM_ICSELECTION_DIRECTTI           (TIM_CCMR1_CC1S_0)   /*!< TIM Input 1, 2, 3 or 4 is selected to be 
+                                                                     connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI         (TIM_CCMR1_CC1S_1)   /*!< TIM Input 1, 2, 3 or 4 is selected to be
+                                                                     connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC                (TIM_CCMR1_CC1S)     /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Input_Capture_Prescaler  TIM Input Capture Prescaler
+  * @{
+  */
+#define TIM_ICPSC_DIV1                     ((uint32_t)0x0000)       /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2                     (TIM_CCMR1_IC1PSC_0)     /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4                     (TIM_CCMR1_IC1PSC_1)     /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8                     (TIM_CCMR1_IC1PSC)       /*!< Capture performed once every 8 events */
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+  * @{
+  */
+#define TIM_OPMODE_SINGLE                  (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE              ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+  * @{
+  */
+#define TIM_ENCODERMODE_TI1                (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2                (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12               (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Interrupt_definition  TIM Interrupt definition
+  * @{
+  */ 
+#define TIM_IT_UPDATE           (TIM_DIER_UIE)
+#define TIM_IT_CC1              (TIM_DIER_CC1IE)
+#define TIM_IT_CC2              (TIM_DIER_CC2IE)
+#define TIM_IT_CC3              (TIM_DIER_CC3IE)
+#define TIM_IT_CC4              (TIM_DIER_CC4IE)
+#define TIM_IT_COM              (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER          (TIM_DIER_TIE)
+#define TIM_IT_BREAK            (TIM_DIER_BIE)
+/**
+  * @}
+  */
+  
+/** @defgroup TIM_Commutation_Source  TIM Commutation Source 
+  * @{
+  */  
+#define TIM_COMMUTATION_TRGI              (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE          ((uint32_t)0x0000)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_DMA_sources  TIM DMA sources
+  * @{
+  */
+#define TIM_DMA_UPDATE                     (TIM_DIER_UDE)
+#define TIM_DMA_CC1                        (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2                        (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3                        (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4                        (TIM_DIER_CC4DE)
+#define TIM_DMA_COM                        (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER                    (TIM_DIER_TDE)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Event_Source  TIM Event Source 
+  * @{
+  */
+#define TIM_EVENTSOURCE_UPDATE              TIM_EGR_UG  
+#define TIM_EVENTSOURCE_CC1                 TIM_EGR_CC1G
+#define TIM_EVENTSOURCE_CC2                 TIM_EGR_CC2G
+#define TIM_EVENTSOURCE_CC3                 TIM_EGR_CC3G
+#define TIM_EVENTSOURCE_CC4                 TIM_EGR_CC4G
+#define TIM_EVENTSOURCE_COM                 TIM_EGR_COMG
+#define TIM_EVENTSOURCE_TRIGGER             TIM_EGR_TG  
+#define TIM_EVENTSOURCE_BREAK               TIM_EGR_BG 
+#define TIM_EVENTSOURCE_BREAK2              TIM_EGR_B2G   
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Flag_definition  TIM Flag definition
+  * @{
+  */
+#define TIM_FLAG_UPDATE                    (TIM_SR_UIF)
+#define TIM_FLAG_CC1                       (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2                       (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3                       (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4                       (TIM_SR_CC4IF)
+#define TIM_FLAG_COM                       (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER                   (TIM_SR_TIF)
+#define TIM_FLAG_BREAK                     (TIM_SR_BIF)
+#define TIM_FLAG_BREAK2                    (TIM_SR_B2IF)
+#define TIM_FLAG_CC1OF                     (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF                     (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF                     (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF                     (TIM_SR_CC4OF)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Clock_Source  TIM Clock Source
+  * @{
+  */
+#define	TIM_CLOCKSOURCE_ETRMODE2    (TIM_SMCR_ETPS_1) 
+#define	TIM_CLOCKSOURCE_INTERNAL    (TIM_SMCR_ETPS_0) 
+#define	TIM_CLOCKSOURCE_ITR0        ((uint32_t)0x0000)
+#define	TIM_CLOCKSOURCE_ITR1        (TIM_SMCR_TS_0)
+#define	TIM_CLOCKSOURCE_ITR2        (TIM_SMCR_TS_1)
+#define	TIM_CLOCKSOURCE_ITR3        (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define	TIM_CLOCKSOURCE_TI1ED       (TIM_SMCR_TS_2)
+#define	TIM_CLOCKSOURCE_TI1         (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define	TIM_CLOCKSOURCE_TI2         (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define	TIM_CLOCKSOURCE_ETRMODE1    (TIM_SMCR_TS)
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Clock_Polarity  TIM Clock Polarity
+  * @{
+  */
+#define TIM_CLOCKPOLARITY_INVERTED           TIM_ETRPOLARITY_INVERTED          /*!< Polarity for ETRx clock sources */ 
+#define TIM_CLOCKPOLARITY_NONINVERTED        TIM_ETRPOLARITY_NONINVERTED       /*!< Polarity for ETRx clock sources */ 
+#define TIM_CLOCKPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING   /*!< Polarity for TIx clock sources */ 
+#define TIM_CLOCKPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING   /*!< Polarity for TIx clock sources */ 
+#define TIM_CLOCKPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE  /*!< Polarity for TIx clock sources */ 
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Clock_Prescaler  TIM Clock Prescaler
+  * @{
+  */
+#define TIM_CLOCKPRESCALER_DIV1              TIM_ETRPRESCALER_DIV1     /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2              TIM_ETRPRESCALER_DIV2     /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4              TIM_ETRPRESCALER_DIV4     /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8              TIM_ETRPRESCALER_DIV8     /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ClearInput_Polarity  TIM Clear Input Polarity
+  * @{
+  */
+#define TIM_CLEARINPUTPOLARITY_INVERTED           TIM_ETRPOLARITY_INVERTED                    /*!< Polarity for ETRx pin */ 
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED        TIM_ETRPOLARITY_NONINVERTED                 /*!< Polarity for ETRx pin */ 
+/**
+  * @}
+  */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+  * @{
+  */
+#define TIM_CLEARINPUTPRESCALER_DIV1                    TIM_ETRPRESCALER_DIV1      /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2                    TIM_ETRPRESCALER_DIV2      /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4                    TIM_ETRPRESCALER_DIV4      /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8                    TIM_ETRPRESCALER_DIV8        /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+/**
+  * @}
+  */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
+  * @{
+  */  
+#define TIM_OSSR_ENABLE 	      (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE          ((uint32_t)0x0000)
+/**
+  * @}
+  */
+  
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
+  * @{
+  */
+#define TIM_OSSI_ENABLE	 	    (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE            ((uint32_t)0x0000)
+/**
+  * @}
+  */
+  
+/** @defgroup TIM_Lock_level  TIM Lock level
+  * @{
+  */
+#define TIM_LOCKLEVEL_OFF	   ((uint32_t)0x0000)
+#define TIM_LOCKLEVEL_1            (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2            (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3            (TIM_BDTR_LOCK)
+/**
+  * @}
+  */  
+/** @defgroup TIM_Break_Input_enable_disable  TIM Break Input State
+  * @{
+  */                         
+#define TIM_BREAK_ENABLE          (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE         ((uint32_t)0x0000)
+/**
+  * @}
+  */
+  
+/** @defgroup TIM_Break_Polarity  TIM Break Polarity 
+  * @{
+  */
+#define TIM_BREAKPOLARITY_LOW        ((uint32_t)0x0000)
+#define TIM_BREAKPOLARITY_HIGH       (TIM_BDTR_BKP)
+/**
+  * @}
+  */
+  
+/** @defgroup TIM_AOE_Bit_Set_Reset  TIM AOE Bit State
+  * @{
+  */
+#define TIM_AUTOMATICOUTPUT_ENABLE           (TIM_BDTR_AOE)
+#define	TIM_AUTOMATICOUTPUT_DISABLE          ((uint32_t)0x0000)
+/**
+  * @}
+  */  
+  
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+  * @{
+  */  
+#define	TIM_TRGO_RESET            ((uint32_t)0x0000)             
+#define	TIM_TRGO_ENABLE           (TIM_CR2_MMS_0)           
+#define	TIM_TRGO_UPDATE           (TIM_CR2_MMS_1)             
+#define	TIM_TRGO_OC1              ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))    
+#define	TIM_TRGO_OC1REF           (TIM_CR2_MMS_2)           
+#define	TIM_TRGO_OC2REF           ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))          
+#define	TIM_TRGO_OC3REF           ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))           
+#define	TIM_TRGO_OC4REF           ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))   
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Master_Slave_Mode  TIM Master Slave Mode
+  * @{
+  */
+#define TIM_MASTERSLAVEMODE_ENABLE          ((uint32_t)0x0080)
+#define TIM_MASTERSLAVEMODE_DISABLE         ((uint32_t)0x0000)
+/**
+  * @}
+  */ 
+  
+/** @defgroup TIM_Trigger_Selection  TIM Trigger Selection
+  * @{
+  */
+#define TIM_TS_ITR0                        ((uint32_t)0x0000)
+#define TIM_TS_ITR1                        ((uint32_t)0x0010)
+#define TIM_TS_ITR2                        ((uint32_t)0x0020)
+#define TIM_TS_ITR3                        ((uint32_t)0x0030)
+#define TIM_TS_TI1F_ED                     ((uint32_t)0x0040)
+#define TIM_TS_TI1FP1                      ((uint32_t)0x0050)
+#define TIM_TS_TI2FP2                      ((uint32_t)0x0060)
+#define TIM_TS_ETRF                        ((uint32_t)0x0070)
+#define TIM_TS_NONE                        ((uint32_t)0xFFFF)
+/**
+  * @}
+  */  
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+  * @{
+  */
+#define TIM_TRIGGERPOLARITY_INVERTED           TIM_ETRPOLARITY_INVERTED      /*!< Polarity for ETRx trigger sources */ 
+#define TIM_TRIGGERPOLARITY_NONINVERTED        TIM_ETRPOLARITY_NONINVERTED   /*!< Polarity for ETRx trigger sources */ 
+#define TIM_TRIGGERPOLARITY_RISING             TIM_INPUTCHANNELPOLARITY_RISING        /*!< Polarity for TIxFPx or TI1_ED trigger sources */ 
+#define TIM_TRIGGERPOLARITY_FALLING            TIM_INPUTCHANNELPOLARITY_FALLING       /*!< Polarity for TIxFPx or TI1_ED trigger sources */ 
+#define TIM_TRIGGERPOLARITY_BOTHEDGE           TIM_INPUTCHANNELPOLARITY_BOTHEDGE      /*!< Polarity for TIxFPx or TI1_ED trigger sources */ 
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+  * @{
+  */
+#define TIM_TRIGGERPRESCALER_DIV1             TIM_ETRPRESCALER_DIV1     /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2             TIM_ETRPRESCALER_DIV2     /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4             TIM_ETRPRESCALER_DIV4     /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8             TIM_ETRPRESCALER_DIV8     /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+/**
+  * @}
+  */
+
+
+/** @defgroup TIM_TI1_Selection TIM TI1 Selection
+  * @{
+  */
+#define TIM_TI1SELECTION_CH1                ((uint32_t)0x0000)
+#define TIM_TI1SELECTION_XORCOMBINATION     (TIM_CR2_TI1S)
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_DMA_Base_address  TIM DMA Base address
+  * @{
+  */
+#define TIM_DMABASE_CR1                    (0x00000000)
+#define TIM_DMABASE_CR2                    (0x00000001)
+#define TIM_DMABASE_SMCR                   (0x00000002)
+#define TIM_DMABASE_DIER                   (0x00000003)
+#define TIM_DMABASE_SR                     (0x00000004)
+#define TIM_DMABASE_EGR                    (0x00000005)
+#define TIM_DMABASE_CCMR1                  (0x00000006)
+#define TIM_DMABASE_CCMR2                  (0x00000007)
+#define TIM_DMABASE_CCER                   (0x00000008)
+#define TIM_DMABASE_CNT                    (0x00000009)
+#define TIM_DMABASE_PSC                    (0x0000000A)
+#define TIM_DMABASE_ARR                    (0x0000000B)
+#define TIM_DMABASE_RCR                    (0x0000000C)
+#define TIM_DMABASE_CCR1                   (0x0000000D)
+#define TIM_DMABASE_CCR2                   (0x0000000E)
+#define TIM_DMABASE_CCR3                   (0x0000000F)
+#define TIM_DMABASE_CCR4                   (0x00000010)
+#define TIM_DMABASE_BDTR                   (0x00000011)
+#define TIM_DMABASE_DCR                    (0x00000012)
+#define TIM_DMABASE_OR                     (0x00000013)
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_DMA_Burst_Length  TIM DMA Burst Length 
+  * @{
+  */
+#define TIM_DMABURSTLENGTH_1TRANSFER           (0x00000000)
+#define TIM_DMABURSTLENGTH_2TRANSFERS          (0x00000100)
+#define TIM_DMABURSTLENGTH_3TRANSFERS          (0x00000200)
+#define TIM_DMABURSTLENGTH_4TRANSFERS          (0x00000300)
+#define TIM_DMABURSTLENGTH_5TRANSFERS          (0x00000400)
+#define TIM_DMABURSTLENGTH_6TRANSFERS          (0x00000500)
+#define TIM_DMABURSTLENGTH_7TRANSFERS          (0x00000600)
+#define TIM_DMABURSTLENGTH_8TRANSFERS          (0x00000700)
+#define TIM_DMABURSTLENGTH_9TRANSFERS          (0x00000800)
+#define TIM_DMABURSTLENGTH_10TRANSFERS         (0x00000900)
+#define TIM_DMABURSTLENGTH_11TRANSFERS         (0x00000A00)
+#define TIM_DMABURSTLENGTH_12TRANSFERS         (0x00000B00)
+#define TIM_DMABURSTLENGTH_13TRANSFERS         (0x00000C00)
+#define TIM_DMABURSTLENGTH_14TRANSFERS         (0x00000D00)
+#define TIM_DMABURSTLENGTH_15TRANSFERS         (0x00000E00)
+#define TIM_DMABURSTLENGTH_16TRANSFERS         (0x00000F00)
+#define TIM_DMABURSTLENGTH_17TRANSFERS         (0x00001000)
+#define TIM_DMABURSTLENGTH_18TRANSFERS         (0x00001100)
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Handle_index  DMA Handle index
+  * @{
+  */
+#define TIM_DMA_ID_UPDATE                ((uint16_t) 0x0)       /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1                   ((uint16_t) 0x1)       /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2                   ((uint16_t) 0x2)       /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3                   ((uint16_t) 0x3)       /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4                   ((uint16_t) 0x4)       /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION           ((uint16_t) 0x5)       /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER               ((uint16_t) 0x6)       /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+  * @}
+  */ 
+
+/** @defgroup Channel_CC_State  Channel CC State
+  * @{
+  */
+#define TIM_CCx_ENABLE                   ((uint32_t)0x0001)
+#define TIM_CCx_DISABLE                  ((uint32_t)0x0000)
+#define TIM_CCxN_ENABLE                  ((uint32_t)0x0004)
+#define TIM_CCxN_DISABLE                 ((uint32_t)0x0000)
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */   
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+  * @{
+  */
+/** @brief Reset TIM handle state
+  * @param  __HANDLE__: TIM handle
+  * @retval None
+  */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+  * @brief  Enable the TIM peripheral.
+  * @param  __HANDLE__: TIM handle
+  * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+  * @brief  Enable the TIM update source request.
+  * @param  __HANDLE__: TIM handle
+  * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__)             ((__HANDLE__)->Instance->CR1|=(TIM_CR1_URS))
+
+/**
+  * @brief  Enable the TIM main Output.
+  * @param  __HANDLE__: TIM handle
+  * @retval None
+  */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__)             ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+   channels have been disabled */
+#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+
+/**
+  * @brief  Disable the TIM peripheral.
+  * @param  __HANDLE__: TIM handle
+  * @retval None
+  */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+                        do { \
+                          if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
+                          { \
+                            if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
+                            { \
+                              (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+                            } \
+                          } \
+                        } while(0)
+                        
+/**
+  * @brief  Disable the TIM update source request.
+  * @param  __HANDLE__: TIM handle
+  * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__)            ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
+
+
+/* The Main Output of a timer instance is disabled only if all the CCx and CCxN
+   channels have been disabled */
+/**
+  * @brief  Disable the TIM main Output.
+  * @param  __HANDLE__: TIM handle
+  * @retval None
+  */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+                        do { \
+                          if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
+                          { \
+                            if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
+                            { \
+                              (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+                            } \
+                          } \
+                        } while(0)
+
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__)    ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__)         ((__HANDLE__)->Instance->DIER |= (__DMA__))
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__)        ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__)          (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__)        ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__)     ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__)            (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+#define __HAL_TIM_SET_PRESCALER (__HANDLE__, __PRESC__)       ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))
+
+#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+
+#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8)) :\
+ ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12) & TIM_CCER_CC4P)))
+
+#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
+ ((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P))
+ 
+/**
+  * @brief  Sets the TIM Counter Register value on runtime.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __COUNTER__: specifies the Counter register new value.
+  * @retval None
+  */
+#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+  * @brief  Gets the TIM Counter Register value on runtime.
+  * @param  __HANDLE__: TIM handle.
+  * @retval None
+  */
+#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
+
+/**
+  * @brief  Sets the TIM Autoreload Register value on runtime without calling 
+  *         another time any Init function.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __AUTORELOAD__: specifies the Counter register new value.
+  * @retval None
+  */
+#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__)                  \
+                        do{                                                  \
+                            (__HANDLE__)->Instance->ARR = (__AUTORELOAD__);  \
+                            (__HANDLE__)->Init.Period = (__AUTORELOAD__);    \
+                          } while(0)
+/**
+  * @brief  Gets the TIM Autoreload Register value on runtime
+  * @param  __HANDLE__: TIM handle.
+  * @retval None
+  */
+#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
+
+/**
+  * @brief  Sets the TIM Clock Division value on runtime without calling 
+  *         another time any Init function. 
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CKD__: specifies the clock division value.
+  *          This parameter can be one of the following value:
+  *            @arg TIM_CLOCKDIVISION_DIV1
+  *            @arg TIM_CLOCKDIVISION_DIV2
+  *            @arg TIM_CLOCKDIVISION_DIV4
+  * @retval None
+  */
+#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
+                        do{                                                             \
+                              (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD);  \
+                              (__HANDLE__)->Instance->CR1 |= (__CKD__);                 \
+                              (__HANDLE__)->Init.ClockDivision = (__CKD__);             \
+                          } while(0)
+/**
+  * @brief  Gets the TIM Clock Division value on runtime
+  * @param  __HANDLE__: TIM handle.
+  * @retval None
+  */
+#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+  * @brief  Sets the TIM Input Capture prescaler on runtime without calling 
+  *         another time HAL_TIM_IC_ConfigChannel() function.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__ : TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  __ICPSC__: specifies the Input Capture4 prescaler new value.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_ICPSC_DIV1: no prescaler
+  *            @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+  *            @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+  *            @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+  * @retval None
+  */
+#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
+                        do{                                                    \
+                              TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__));  \
+                              TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+                          } while(0)
+
+/**
+  * @brief  Gets the TIM Input Capture prescaler on runtime
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__ : TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+  *            @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+  *            @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+  *            @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+  * @retval None
+  */
+#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__)  \
+  (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+   ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
+   ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+   (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
+  
+/**
+  * @brief  Sets the TIM Capture x input polarity on runtime.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__: TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  __POLARITY__: Polarity for TIx source   
+  *            @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
+  *            @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
+  *            @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
+  * @note  The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized  for TIM Channel 4.     
+  * @retval None
+  */
+#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__)                          \
+                       do{                                                                            \
+                           TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__));               \
+                           TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
+                         }while(0)
+											 
+/**
+  * @}
+  */
+
+/* Include TIM HAL Extension module */
+#include "stm32f7xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group1
+  * @{
+  */
+
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group2
+  * @{
+  */
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group3
+  * @{
+  */
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group4
+  * @{
+  */
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group5
+  * @{
+  */
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group6
+  * @{
+  */
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim,  TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group7
+  * @{
+  */
+/* Interrupt Handler functions  **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group8
+  * @{
+  */
+/* Control functions  *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel,  uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);    
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+                                              uint32_t  *BurstBuffer, uint32_t  BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+                                              uint32_t  *BurstBuffer, uint32_t  BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group9
+  * @{
+  */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/**
+  * @}
+  */
+
+/** @addtogroup TIM_Exported_Functions_Group10
+  * @{
+  */
+/* Peripheral State functions  **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+  
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+  * @{
+  */
+
+/** @defgroup TIM_IS_TIM_Definitions TIM Private macros to check input parameters
+  * @{
+  */
+#define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP)              || \
+                                       ((__MODE__) == TIM_COUNTERMODE_DOWN)            || \
+                                       ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1)  || \
+                                       ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2)  || \
+                                       ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3))
+
+#define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \
+                                           ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \
+                                           ((__DIV__) == TIM_CLOCKDIVISION_DIV4))
+
+#define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \
+                                      ((__STATE__) == TIM_OCFAST_ENABLE))
+
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
+                                    ((STATE) == TIM_OUTPUTSTATE_ENABLE))
+
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
+                                     ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
+
+#define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \
+                                          ((__POLARITY__) == TIM_OCPOLARITY_LOW))
+
+#define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \
+                                           ((__POLARITY__) == TIM_OCNPOLARITY_LOW))
+
+#define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \
+                                        ((__STATE__) == TIM_OCIDLESTATE_RESET))
+
+#define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \
+                                         ((__STATE__) == TIM_OCNIDLESTATE_RESET))
+
+#define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING)   || \
+                                          ((__POLARITY__) == TIM_ICPOLARITY_FALLING)  || \
+                                          ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE))
+
+#define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \
+                                            ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \
+                                            ((__SELECTION__) == TIM_ICSELECTION_TRC))
+
+#define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \
+                                            ((__PRESCALER__) == TIM_ICPSC_DIV2) || \
+                                            ((__PRESCALER__) == TIM_ICPSC_DIV4) || \
+                                            ((__PRESCALER__) == TIM_ICPSC_DIV8))
+
+#define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \
+                                   ((__MODE__) == TIM_OPMODE_REPETITIVE))
+
+#define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \
+                                       ((__MODE__) == TIM_ENCODERMODE_TI2) || \
+                                       ((__MODE__) == TIM_ENCODERMODE_TI12))   
+
+#define IS_TIM_IT(__IT__) ((((__IT__) & 0xFFFFFF00) == 0x00000000) && ((__IT__) != 0x00000000))
+
+
+#define IS_TIM_GET_IT(__IT__) (((__IT__) == TIM_IT_UPDATE)  || \
+                               ((__IT__) == TIM_IT_CC1)     || \
+                               ((__IT__) == TIM_IT_CC2)     || \
+                               ((__IT__) == TIM_IT_CC3)     || \
+                               ((__IT__) == TIM_IT_CC4)     || \
+                               ((__IT__) == TIM_IT_COM)     || \
+                               ((__IT__) == TIM_IT_TRIGGER) || \
+                               ((__IT__) == TIM_IT_BREAK))
+
+#define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FF) == 0x00000000) && ((__SOURCE__) != 0x00000000))
+
+#define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFE00) == 0x00000000) && ((__SOURCE__) != 0x00000000))
+
+#define IS_TIM_FLAG(__FLAG__) (((__FLAG__) == TIM_FLAG_UPDATE) || \
+                               ((__FLAG__) == TIM_FLAG_CC1)     || \
+                               ((__FLAG__) == TIM_FLAG_CC2)     || \
+                               ((__FLAG__) == TIM_FLAG_CC3)     || \
+                               ((__FLAG__) == TIM_FLAG_CC4)     || \
+                               ((__FLAG__) == TIM_FLAG_COM)     || \
+                               ((__FLAG__) == TIM_FLAG_TRIGGER) || \
+                               ((__FLAG__) == TIM_FLAG_BREAK)   || \
+                               ((__FLAG__) == TIM_FLAG_BREAK2)  || \
+                               ((__FLAG__) == TIM_FLAG_CC1OF)   || \
+                               ((__FLAG__) == TIM_FLAG_CC2OF)   || \
+                               ((__FLAG__) == TIM_FLAG_CC3OF)   || \
+                               ((__FLAG__) == TIM_FLAG_CC4OF))
+
+#define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0)     || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1)     || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2)     || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3)     || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED)    || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_TI1)      || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_TI2)      || \
+                                       ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1))
+
+#define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED)    || \
+                                        ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+                                        ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING)      || \
+                                        ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING)     || \
+                                        ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE))
+
+#define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \
+                                              ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \
+                                              ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \
+                                              ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) 
+
+#define IS_TIM_CLOCKFILTER(__ICFILTER__)      ((__ICFILTER__) <= 0xF) 
+
+#define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__)   (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+                                                    ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+
+#define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__)   (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+                                                 ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+                                                 ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+                                                 ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8))
+
+#define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xF) 
+
+#define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \
+                                      ((__STATE__) == TIM_OSSR_DISABLE))
+
+#define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \
+                                      ((__STATE__) == TIM_OSSI_DISABLE))
+
+#define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \
+                                      ((__LEVEL__) == TIM_LOCKLEVEL_1) || \
+                                      ((__LEVEL__) == TIM_LOCKLEVEL_2) || \
+                                      ((__LEVEL__) == TIM_LOCKLEVEL_3)) 
+
+#define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \
+                                       ((__STATE__) == TIM_BREAK_DISABLE))
+
+#define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \
+                                             ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH))
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+                                                  ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE))
+
+#define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \
+                                        ((__SOURCE__) == TIM_TRGO_ENABLE) || \
+                                        ((__SOURCE__) == TIM_TRGO_UPDATE) || \
+                                        ((__SOURCE__) == TIM_TRGO_OC1) || \
+                                        ((__SOURCE__) == TIM_TRGO_OC1REF) || \
+                                        ((__SOURCE__) == TIM_TRGO_OC2REF) || \
+                                        ((__SOURCE__) == TIM_TRGO_OC3REF) || \
+                                        ((__SOURCE__) == TIM_TRGO_OC4REF))
+
+#define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \
+                                     ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE))
+
+#define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
+                                                 ((__SELECTION__) == TIM_TS_ITR1) || \
+                                                 ((__SELECTION__) == TIM_TS_ITR2) || \
+                                                 ((__SELECTION__) == TIM_TS_ITR3) || \
+                                                 ((__SELECTION__) == TIM_TS_TI1F_ED) || \
+                                                 ((__SELECTION__) == TIM_TS_TI1FP1) || \
+                                                 ((__SELECTION__) == TIM_TS_TI2FP2) || \
+                                                 ((__SELECTION__) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+                                                      ((SELECTION) == TIM_TS_ITR1) || \
+                                                      ((SELECTION) == TIM_TS_ITR2) || \
+                                                      ((SELECTION) == TIM_TS_ITR3))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \
+                                                               ((__SELECTION__) == TIM_TS_ITR1) || \
+                                                               ((__SELECTION__) == TIM_TS_ITR2) || \
+                                                               ((__SELECTION__) == TIM_TS_ITR3) || \
+                                                               ((__SELECTION__) == TIM_TS_NONE))
+
+#define IS_TIM_TRIGGERPOLARITY(__POLARITY__)     (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED   ) || \
+                                                  ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+                                                  ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING     ) || \
+                                                  ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING    ) || \
+                                                  ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE   ))
+
+#define IS_TIM_TRIGGERPRESCALER(__PRESCALER__)  (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \
+                                                 ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \
+                                                 ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \
+                                                 ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) 
+
+#define IS_TIM_TRIGGERFILTER(__ICFILTER__)     ((__ICFILTER__) <= 0xF) 
+
+#define IS_TIM_TI1SELECTION(__TI1SELECTION__)   (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \
+                                                 ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION))
+
+#define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \
+                                   ((__BASE__) == TIM_DMABASE_CR2) || \
+                                   ((__BASE__) == TIM_DMABASE_SMCR) || \
+                                   ((__BASE__) == TIM_DMABASE_DIER) || \
+                                   ((__BASE__) == TIM_DMABASE_SR) || \
+                                   ((__BASE__) == TIM_DMABASE_EGR) || \
+                                   ((__BASE__) == TIM_DMABASE_CCMR1) || \
+                                   ((__BASE__) == TIM_DMABASE_CCMR2) || \
+                                   ((__BASE__) == TIM_DMABASE_CCER) || \
+                                   ((__BASE__) == TIM_DMABASE_CNT) || \
+                                   ((__BASE__) == TIM_DMABASE_PSC) || \
+                                   ((__BASE__) == TIM_DMABASE_ARR) || \
+                                   ((__BASE__) == TIM_DMABASE_RCR) || \
+                                   ((__BASE__) == TIM_DMABASE_CCR1) || \
+                                   ((__BASE__) == TIM_DMABASE_CCR2) || \
+                                   ((__BASE__) == TIM_DMABASE_CCR3) || \
+                                   ((__BASE__) == TIM_DMABASE_CCR4) || \
+                                   ((__BASE__) == TIM_DMABASE_BDTR) || \
+                                   ((__BASE__) == TIM_DMABASE_DCR) || \
+                                   ((__BASE__) == TIM_DMABASE_OR))
+
+#define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
+                                       ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS))
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) 
+
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIM_Private_Functions TIM Private Functions
+  * @{
+  */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler, uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+/**
+  * @}
+  */ 
+     
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_tim_ex.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,2487 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_tim_ex.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   TIM HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Timer extension peripheral:
+  *           + Time Hall Sensor Interface Initialization
+  *           + Time Hall Sensor Interface Start
+  *           + Time Complementary signal bread and dead time configuration  
+  *           + Time Master and Slave synchronization configuration
+  *           + Time Output Compare/PWM Channel Configuration (for channels 5 and 6)
+  *           + Time OCRef clear configuration
+  *           + Timer remapping capabilities configuration  
+  @verbatim 
+  ==============================================================================
+                      ##### TIMER Extended features #####
+  ==============================================================================
+  [..] 
+    The Timer Extension features include: 
+    (#) Complementary outputs with programmable dead-time for :
+        (++) Input Capture
+        (++) Output Compare
+        (++) PWM generation (Edge and Center-aligned Mode)
+        (++) One-pulse mode output
+    (#) Synchronization circuit to control the timer with external signals and to 
+        interconnect several timers together.
+    (#) Break input to put the timer output signals in reset state or in a known state.
+    (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for 
+        positioning purposes                
+   
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+     (#) Initialize the TIM low level resources by implementing the following functions 
+         depending from feature used :
+           (++) Complementary Output Compare : HAL_TIM_OC_MspInit()
+           (++) Complementary PWM generation : HAL_TIM_PWM_MspInit()
+           (++) Complementary One-pulse mode output : HAL_TIM_OnePulse_MspInit()
+           (++) Hall Sensor output : HAL_TIM_HallSensor_MspInit()
+           
+     (#) Initialize the TIM low level resources :
+        (##) Enable the TIM interface clock using __TIMx_CLK_ENABLE(); 
+        (##) TIM pins configuration
+            (+++) Enable the clock for the TIM GPIOs using the following function:
+                 __GPIOx_CLK_ENABLE();   
+            (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();  
+
+     (#) The external Clock can be configured, if needed (the default clock is the 
+         internal clock from the APBx), using the following function:
+         HAL_TIM_ConfigClockSource, the clock configuration should be done before 
+         any start function.
+  
+    (#) Configure the TIM in the desired functioning mode using one of the 
+        initialization function of this driver:
+        (++) HAL_TIMEx_HallSensor_Init and HAL_TIMEx_ConfigCommutationEvent: to use the 
+             Timer Hall Sensor Interface and the commutation event with the corresponding 
+             Interrupt and DMA request if needed (Note that One Timer is used to interface 
+             with the Hall sensor Interface and another Timer should be used to use 
+             the commutation event).
+
+    (#) Activate the TIM peripheral using one of the start functions: 
+           (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OC_Start_IT()
+           (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
+           (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
+           (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
+
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup TIMEx TIMEx
+  * @brief TIM Extended HAL module driver
+  * @{
+  */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define BDTR_BKF_SHIFT  (16)
+#define BDTR_BK2F_SHIFT (20)
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/** @addtogroup TIMEx_Private_Functions
+  * @{
+  */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState);  
+static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+/**
+  * @}
+  */
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup TIMEx_Exported_Functions TIMEx Exported Functions
+  * @{
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+ *  @brief    Timer Hall Sensor functions 
+ *
+@verbatim    
+  ==============================================================================
+                      ##### Timer Hall Sensor functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to:
+    (+) Initialize and configure TIM HAL Sensor. 
+    (+) De-initialize TIM HAL Sensor.
+    (+) Start the Hall Sensor Interface.
+    (+) Stop the Hall Sensor Interface.
+    (+) Start the Hall Sensor Interface and enable interrupts.
+    (+) Stop the Hall Sensor Interface and disable interrupts.
+    (+) Start the Hall Sensor Interface and enable DMA transfers.
+    (+) Stop the Hall Sensor Interface and disable DMA transfers.
+ 
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Initializes the TIM Hall Sensor Interface and create the associated handle.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sConfig: TIM Hall Sensor configuration structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig)
+{
+  TIM_OC_InitTypeDef OC_Config;
+    
+  /* Check the TIM handle allocation */
+  if(htim == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
+  assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
+  assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
+  assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
+  assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
+
+  /* Set the TIM state */
+  htim->State= HAL_TIM_STATE_BUSY;
+  
+  /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
+  HAL_TIMEx_HallSensor_MspInit(htim);
+  
+  /* Configure the Time base in the Encoder Mode */
+  TIM_Base_SetConfig(htim->Instance, &htim->Init);
+  
+  /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the  Hall sensor */
+  TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
+  
+  /* Reset the IC1PSC Bits */
+  htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
+  /* Set the IC1PSC value */
+  htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
+  
+  /* Enable the Hall sensor interface (XOR function of the three inputs) */
+  htim->Instance->CR2 |= TIM_CR2_TI1S;
+  
+  /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
+  htim->Instance->SMCR &= ~TIM_SMCR_TS;
+  htim->Instance->SMCR |= TIM_TS_TI1F_ED;
+  
+  /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */  
+  htim->Instance->SMCR &= ~TIM_SMCR_SMS;
+  htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
+  
+  /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
+  OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
+  OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
+  OC_Config.OCMode = TIM_OCMODE_PWM2;
+  OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+  OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
+  OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
+  OC_Config.Pulse = sConfig->Commutation_Delay; 
+    
+  TIM_OC2_SetConfig(htim->Instance, &OC_Config);
+  
+  /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
+    register to 101 */
+  htim->Instance->CR2 &= ~TIM_CR2_MMS;
+  htim->Instance->CR2 |= TIM_TRGO_OC2REF; 
+  
+  /* Initialize the TIM state*/
+  htim->State= HAL_TIM_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the TIM Hall Sensor interface  
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_INSTANCE(htim->Instance));
+
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  /* Disable the TIM Peripheral Clock */
+  __HAL_TIM_DISABLE(htim);
+    
+  /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
+  HAL_TIMEx_HallSensor_MspDeInit(htim);
+    
+  /* Change TIM state */  
+  htim->State = HAL_TIM_STATE_RESET; 
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Hall Sensor MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes TIM Hall Sensor MSP.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Starts the TIM Hall Sensor Interface.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+  
+  /* Enable the Input Capture channels 1
+    (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */  
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); 
+  
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Hall sensor Interface.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+  
+  /* Disable the Input Capture channels 1, 2 and 3
+    (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */  
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); 
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Hall Sensor Interface in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
+{ 
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+  
+  /* Enable the capture compare Interrupts 1 event */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+  
+  /* Enable the Input Capture channels 1
+    (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */  
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);  
+  
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Hall Sensor Interface in interrupt mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+  
+  /* Disable the Input Capture channels 1
+    (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */  
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); 
+  
+  /* Disable the capture compare Interrupts event */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM Hall Sensor Interface in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  pData: The destination Buffer address.
+  * @param  Length: The length of data to be transferred from TIM peripheral to memory.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+  
+   if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if(((uint32_t)pData == 0 ) && (Length > 0)) 
+    {
+      return HAL_ERROR;                                    
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }
+  /* Enable the Input Capture channels 1
+    (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */  
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE); 
+  
+  /* Set the DMA Input Capture 1 Callback */
+  htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMACaptureCplt;     
+  /* Set the DMA error callback */
+  htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+  
+  /* Enable the DMA Stream for Capture 1*/
+  HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);    
+  
+  /* Enable the capture compare 1 Interrupt */
+  __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+ 
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Hall Sensor Interface in DMA mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
+  
+  /* Disable the Input Capture channels 1
+    (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */  
+  TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE); 
+ 
+  
+  /* Disable the capture compare Interrupts 1 event */
+  __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+ 
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+ *  @brief    Timer Complementary Output Compare functions 
+ *
+@verbatim   
+  ==============================================================================
+              ##### Timer Complementary Output Compare functions #####
+  ==============================================================================  
+  [..]  
+    This section provides functions allowing to:
+    (+) Start the Complementary Output Compare/PWM.
+    (+) Stop the Complementary Output Compare/PWM.
+    (+) Start the Complementary Output Compare/PWM and enable interrupts.
+    (+) Stop the Complementary Output Compare/PWM and disable interrupts.
+    (+) Start the Complementary Output Compare/PWM and enable DMA transfers.
+    (+) Stop the Complementary Output Compare/PWM and disable DMA transfers.
+               
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Starts the TIM Output Compare signal generation on the complementary
+  *         output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.  
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); 
+  
+     /* Enable the Capture compare channel N */
+     TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+    
+  /* Enable the Main Output */
+    __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation on the complementary
+  *         output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{ 
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); 
+  
+    /* Disable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+    
+  /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in interrupt mode 
+  *         on the complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); 
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Enable the TIM Output Compare interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Output Compare interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Output Compare interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Output Compare interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  } 
+  
+  /* Enable the TIM Break interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+  
+  /* Enable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+
+  /* Enable the Main Output */
+ __HAL_TIM_MOE_ENABLE(htim);
+
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in interrupt mode 
+  *         on the complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpccer = 0; 
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); 
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+    
+    default:
+    break; 
+  }
+
+  /* Disable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+
+  /* Disable the TIM Break interrupt (only if no more channel is active) */
+  tmpccer = htim->Instance->CCER;
+  if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+  {
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+  }
+
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Starts the TIM Output Compare signal generation in DMA mode 
+  *         on the complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData: The source Buffer address.
+  * @param  Length: The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); 
+  
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if(((uint32_t)pData == 0 ) && (Length > 0)) 
+    {
+      return HAL_ERROR;                                    
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }    
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {      
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+      
+      /* Enable the TIM Output Compare DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+      
+      /* Enable the TIM Output Compare DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+{
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+      
+      /* Enable the TIM Output Compare DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+     /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+      
+      /* Enable the TIM Output Compare DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  }
+
+  /* Enable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+  
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+  
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim); 
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM Output Compare signal generation in DMA mode 
+  *         on the complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); 
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Disable the TIM Output Compare DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Output Compare DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Output Compare DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Output Compare interrupt */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  } 
+  
+  /* Disable the Capture compare channel N */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+  
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+ *  @brief    Timer Complementary PWM functions 
+ *
+@verbatim   
+  ==============================================================================
+                 ##### Timer Complementary PWM functions #####
+  ==============================================================================  
+  [..]  
+    This section provides functions allowing to:
+    (+) Start the Complementary PWM.
+    (+) Stop the Complementary PWM.
+    (+) Start the Complementary PWM and enable interrupts.
+    (+) Stop the Complementary PWM and disable interrupts.
+    (+) Start the Complementary PWM and enable DMA transfers.
+    (+) Stop the Complementary PWM and disable DMA transfers.
+    (+) Start the Complementary Input Capture measurement.
+    (+) Stop the Complementary Input Capture.
+    (+) Start the Complementary Input Capture and enable interrupts.
+    (+) Stop the Complementary Input Capture and disable interrupts.
+    (+) Start the Complementary Input Capture and enable DMA transfers.
+    (+) Stop the Complementary Input Capture and disable DMA transfers.
+    (+) Start the Complementary One Pulse generation.
+    (+) Stop the Complementary One Pulse.
+    (+) Start the Complementary One Pulse and enable interrupts.
+    (+) Stop the Complementary One Pulse and disable interrupts.
+               
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the PWM signal generation on the complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); 
+  
+  /* Enable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+  
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+  
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Stops the PWM signal generation on the complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
+{ 
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); 
+  
+  /* Disable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);  
+  
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Starts the PWM signal generation in interrupt mode on the 
+  *         complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); 
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Enable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Enable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Enable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Enable the TIM Capture/Compare 4 interrupt */
+      __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  } 
+  
+  /* Enable the TIM Break interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
+  
+  /* Enable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+  
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+  
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Stops the PWM signal generation in interrupt mode on the 
+  *         complementary output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  uint32_t tmpccer = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); 
+
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Disable the TIM Capture/Compare 1 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 3 interrupt */
+      __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
+    }
+    break;
+    
+    default:
+    break; 
+  }
+  
+  /* Disable the complementary PWM output  */
+  TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+  
+  /* Disable the TIM Break interrupt (only if no more channel is active) */
+  tmpccer = htim->Instance->CCER;
+  if ((tmpccer & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
+  {
+    __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
+  }
+  
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+} 
+
+/**
+  * @brief  Starts the TIM PWM signal generation in DMA mode on the 
+  *         complementary output
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  pData: The source Buffer address.
+  * @param  Length: The length of data to be transferred from memory to TIM peripheral
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); 
+  
+  if((htim->State == HAL_TIM_STATE_BUSY))
+  {
+     return HAL_BUSY;
+  }
+  else if((htim->State == HAL_TIM_STATE_READY))
+  {
+    if(((uint32_t)pData == 0 ) && (Length > 0)) 
+    {
+      return HAL_ERROR;                                    
+    }
+    else
+    {
+      htim->State = HAL_TIM_STATE_BUSY;
+    }
+  }    
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {      
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
+      
+      /* Enable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
+      
+      /* Enable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
+      
+      /* Enable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+     /* Set the DMA Period elapsed callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = HAL_TIM_DMADelayPulseCplt;
+     
+      /* Set the DMA error callback */
+      htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = HAL_TIM_DMAError ;
+      
+      /* Enable the DMA Stream */
+      HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
+      
+      /* Enable the TIM Capture/Compare 4 DMA request */
+      __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  }
+
+  /* Enable the complementary PWM output  */
+     TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
+    
+  /* Enable the Main Output */
+    __HAL_TIM_MOE_ENABLE(htim);
+  
+  /* Enable the Peripheral */
+  __HAL_TIM_ENABLE(htim); 
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM PWM signal generation in DMA mode on the complementary
+  *         output
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Channel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel)); 
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {       
+      /* Disable the TIM Capture/Compare 1 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Disable the TIM Capture/Compare 2 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Disable the TIM Capture/Compare 3 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Disable the TIM Capture/Compare 4 DMA request */
+      __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
+    }
+    break;
+    
+    default:
+    break;
+  } 
+  
+  /* Disable the complementary PWM output */
+    TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
+     
+  /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim);
+  
+  /* Change the htim state */
+  htim->State = HAL_TIM_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+ *  @brief    Timer Complementary One Pulse functions 
+ *
+@verbatim   
+  ==============================================================================
+                ##### Timer Complementary One Pulse functions #####
+  ==============================================================================  
+  [..]  
+    This section provides functions allowing to:
+    (+) Start the Complementary One Pulse generation.
+    (+) Stop the Complementary One Pulse.
+    (+) Start the Complementary One Pulse and enable interrupts.
+    (+) Stop the Complementary One Pulse and disable interrupts.
+               
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation on the complemetary 
+  *         output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+  {
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); 
+  
+  /* Enable the complementary One Pulse output */
+  TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); 
+  
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Stops the TIM One Pulse signal generation on the complementary 
+  *         output.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); 
+
+  /* Disable the complementary One Pulse output */
+    TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+  
+  /* Disable the Main Output */
+    __HAL_TIM_MOE_DISABLE(htim);
+  
+  /* Disable the Peripheral */
+  __HAL_TIM_DISABLE(htim); 
+   
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the TIM One Pulse signal generation in interrupt mode on the
+  *         complementary channel.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel: TIM Channel to be enabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); 
+
+  /* Enable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
+  
+  /* Enable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
+  
+  /* Enable the complementary One Pulse output */
+  TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE); 
+  
+  /* Enable the Main Output */
+  __HAL_TIM_MOE_ENABLE(htim);
+  
+  /* Return function status */
+  return HAL_OK;
+  } 
+  
+/**
+  * @brief  Stops the TIM One Pulse signal generation in interrupt mode on the
+  *         complementary channel.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  OutputChannel: TIM Channel to be disabled.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel)); 
+
+  /* Disable the TIM Capture/Compare 1 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
+  
+  /* Disable the TIM Capture/Compare 2 interrupt */
+  __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
+  
+  /* Disable the complementary One Pulse output */
+  TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
+  
+  /* Disable the Main Output */
+  __HAL_TIM_MOE_DISABLE(htim);
+  
+  /* Disable the Peripheral */
+   __HAL_TIM_DISABLE(htim);  
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+  
+/** @defgroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+ *  @brief   	Peripheral Control functions 
+ *
+@verbatim   
+  ==============================================================================
+                    ##### Peripheral Control functions #####
+  ==============================================================================  
+  [..]  
+    This section provides functions allowing to:
+    (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode. 
+    (+) Configure External Clock source.
+    (+) Configure Complementary channels, break features and dead time.
+    (+) Configure Master and the Slave synchronization.
+    (+) Configure the commutation event in case of use of the Hall sensor interface.
+    (+) Configure the DMA Burst Mode.
+      
+@endverbatim
+  * @{
+  */
+/**
+  * @brief  Configure the TIM commutation event sequence.
+  * @note  This function is mandatory to use the commutation event in order to 
+  *        update the configuration at each commutation detection on the TRGI input of the Timer,
+  *        the typical use of this feature is with the use of another Timer(interface Timer) 
+  *        configured in Hall sensor interface, this interface Timer will generate the 
+  *        commutation at its TRGO output (connected to Timer used in this function) each time 
+  *        the TI1 of the Interface Timer detect a commutation at its input TI1.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0: Internal trigger 0 selected
+  *            @arg TIM_TS_ITR1: Internal trigger 1 selected
+  *            @arg TIM_TS_ITR2: Internal trigger 2 selected
+  *            @arg TIM_TS_ITR3: Internal trigger 3 selected
+  *            @arg TIM_TS_NONE: No trigger is needed 
+  * @param  CommutationSource: the Commutation Event source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+  *            @arg TIM_COMMUTATION_SOFTWARE:  Commutation source is set by software using the COMG bit
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+  
+  __HAL_LOCK(htim);
+  
+  if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+      (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+  {    
+    /* Select the Input trigger */
+    htim->Instance->SMCR &= ~TIM_SMCR_TS;
+    htim->Instance->SMCR |= InputTrigger;
+  }
+    
+  /* Select the Capture Compare preload feature */
+  htim->Instance->CR2 |= TIM_CR2_CCPC;
+  /* Select the Commutation event source */
+  htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+  htim->Instance->CR2 |= CommutationSource;
+    
+  __HAL_UNLOCK(htim);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the TIM commutation event sequence with interrupt.
+  * @note  This function is mandatory to use the commutation event in order to 
+  *        update the configuration at each commutation detection on the TRGI input of the Timer,
+  *        the typical use of this feature is with the use of another Timer(interface Timer) 
+  *        configured in Hall sensor interface, this interface Timer will generate the 
+  *        commutation at its TRGO output (connected to Timer used in this function) each time 
+  *        the TI1 of the Interface Timer detect a commutation at its input TI1.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0: Internal trigger 0 selected
+  *            @arg TIM_TS_ITR1: Internal trigger 1 selected
+  *            @arg TIM_TS_ITR2: Internal trigger 2 selected
+  *            @arg TIM_TS_ITR3: Internal trigger 3 selected
+  *            @arg TIM_TS_NONE: No trigger is needed
+  * @param  CommutationSource: the Commutation Event source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+  *            @arg TIM_COMMUTATION_SOFTWARE:  Commutation source is set by software using the COMG bit
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+  
+  __HAL_LOCK(htim);
+  
+  if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+      (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+  {    
+    /* Select the Input trigger */
+    htim->Instance->SMCR &= ~TIM_SMCR_TS;
+    htim->Instance->SMCR |= InputTrigger;
+  }
+  
+  /* Select the Capture Compare preload feature */
+  htim->Instance->CR2 |= TIM_CR2_CCPC;
+  /* Select the Commutation event source */
+  htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+  htim->Instance->CR2 |= CommutationSource;
+    
+  /* Enable the Commutation Interrupt Request */
+  __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
+
+  __HAL_UNLOCK(htim);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configure the TIM commutation event sequence with DMA.
+  * @note  This function is mandatory to use the commutation event in order to 
+  *        update the configuration at each commutation detection on the TRGI input of the Timer,
+  *        the typical use of this feature is with the use of another Timer(interface Timer) 
+  *        configured in Hall sensor interface, this interface Timer will generate the 
+  *        commutation at its TRGO output (connected to Timer used in this function) each time 
+  *        the TI1 of the Interface Timer detect a commutation at its input TI1.
+  * @note: The user should configure the DMA in his own software, in This function only the COMDE bit is set
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TS_ITR0: Internal trigger 0 selected
+  *            @arg TIM_TS_ITR1: Internal trigger 1 selected
+  *            @arg TIM_TS_ITR2: Internal trigger 2 selected
+  *            @arg TIM_TS_ITR3: Internal trigger 3 selected
+  *            @arg TIM_TS_NONE: No trigger is needed
+  * @param  CommutationSource: the Commutation Event source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
+  *            @arg TIM_COMMUTATION_SOFTWARE:  Commutation source is set by software using the COMG bit
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
+  
+  __HAL_LOCK(htim);
+  
+  if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
+      (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
+  {    
+    /* Select the Input trigger */
+    htim->Instance->SMCR &= ~TIM_SMCR_TS;
+    htim->Instance->SMCR |= InputTrigger;
+  }
+  
+  /* Select the Capture Compare preload feature */
+  htim->Instance->CR2 |= TIM_CR2_CCPC;
+  /* Select the Commutation event source */
+  htim->Instance->CR2 &= ~TIM_CR2_CCUS;
+  htim->Instance->CR2 |= CommutationSource;
+  
+  /* Enable the Commutation DMA Request */
+  /* Set the DMA Commutation Callback */
+  htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = HAL_TIMEx_DMACommutationCplt;     
+  /* Set the DMA error callback */
+  htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = HAL_TIM_DMAError;
+  
+  /* Enable the Commutation DMA Request */
+  __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
+
+  __HAL_UNLOCK(htim);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM Output Compare Channels according to the specified
+  *         parameters in the TIM_OC_InitTypeDef.
+  * @param  htim: TIM Output Compare handle
+  * @param  sConfig: TIM Output Compare configuration structure
+  * @param  Channel : TIM Channels to configure
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected 
+  *            @arg TIM_CHANNEL_5: TIM Channel 5 selected 
+  *            @arg TIM_CHANNEL_6: TIM Channel 6 selected 
+  *            @arg TIM_CHANNEL_ALL: all output channels supported by the timer instance selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
+{  
+  /* Check the parameters */
+  assert_param(IS_TIM_CHANNELS(Channel)); 
+  assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
+  assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+  
+  /* Check input state */
+  __HAL_LOCK(htim); 
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); 
+      
+     /* Configure the TIM Channel 1 in Output Compare */
+      TIM_OC1_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); 
+      
+      /* Configure the TIM Channel 2 in Output Compare */
+      TIM_OC2_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); 
+      
+      /* Configure the TIM Channel 3 in Output Compare */
+      TIM_OC3_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); 
+      
+       /* Configure the TIM Channel 4 in Output Compare */
+       TIM_OC4_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+    
+    case TIM_CHANNEL_5:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); 
+      
+       /* Configure the TIM Channel 5 in Output Compare */
+       TIM_OC5_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+    
+    case TIM_CHANNEL_6:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); 
+      
+       /* Configure the TIM Channel 6 in Output Compare */
+       TIM_OC6_SetConfig(htim->Instance, sConfig);
+    }
+    break;
+        
+    default:
+    break;    
+  }
+  
+  htim->State = HAL_TIM_STATE_READY;
+  
+  __HAL_UNLOCK(htim); 
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the TIM PWM  channels according to the specified
+  *         parameters in the TIM_OC_InitTypeDef.
+  * @param  htim: TIM PWM handle
+  * @param  sConfig: TIM PWM configuration structure
+  * @param  Channel : TIM Channels to be configured
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  *            @arg TIM_CHANNEL_5: TIM Channel 5 selected 
+  *            @arg TIM_CHANNEL_6: TIM Channel 6 selected 
+  *            @arg TIM_CHANNEL_ALL: all PWM channels supported by the timer instance selected
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, 
+                                            TIM_OC_InitTypeDef* sConfig, 
+                                            uint32_t Channel)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CHANNELS(Channel)); 
+  assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
+  assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
+  assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
+  
+  /* Check input state */
+  __HAL_LOCK(htim);
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+    
+  switch (Channel)
+  {
+    case TIM_CHANNEL_1:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC1_INSTANCE(htim->Instance)); 
+      
+      /* Configure the Channel 1 in PWM mode */
+      TIM_OC1_SetConfig(htim->Instance, sConfig);
+      
+      /* Set the Preload enable bit for channel1 */
+      htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
+      
+      /* Configure the Output Fast mode */
+      htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
+      htim->Instance->CCMR1 |= sConfig->OCFastMode;
+    }
+    break;
+    
+    case TIM_CHANNEL_2:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC2_INSTANCE(htim->Instance)); 
+      
+      /* Configure the Channel 2 in PWM mode */
+      TIM_OC2_SetConfig(htim->Instance, sConfig);
+      
+      /* Set the Preload enable bit for channel2 */
+      htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
+      
+      /* Configure the Output Fast mode */
+      htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
+      htim->Instance->CCMR1 |= sConfig->OCFastMode << 8;
+    }
+    break;
+    
+    case TIM_CHANNEL_3:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC3_INSTANCE(htim->Instance)); 
+      
+      /* Configure the Channel 3 in PWM mode */
+      TIM_OC3_SetConfig(htim->Instance, sConfig);
+      
+      /* Set the Preload enable bit for channel3 */
+      htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
+      
+     /* Configure the Output Fast mode */
+      htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
+      htim->Instance->CCMR2 |= sConfig->OCFastMode;  
+    }
+    break;
+    
+    case TIM_CHANNEL_4:
+    {
+      /* Check the parameters */
+      assert_param(IS_TIM_CC4_INSTANCE(htim->Instance)); 
+      
+      /* Configure the Channel 4 in PWM mode */
+      TIM_OC4_SetConfig(htim->Instance, sConfig);
+      
+      /* Set the Preload enable bit for channel4 */
+      htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
+      
+     /* Configure the Output Fast mode */
+      htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
+      htim->Instance->CCMR2 |= sConfig->OCFastMode << 8;  
+    }
+    break;
+    
+    case TIM_CHANNEL_5:
+    {
+       /* Check the parameters */
+      assert_param(IS_TIM_CC5_INSTANCE(htim->Instance)); 
+      
+     /* Configure the Channel 5 in PWM mode */
+      TIM_OC5_SetConfig(htim->Instance, sConfig);
+      
+      /* Set the Preload enable bit for channel5*/
+      htim->Instance->CCMR3 |= TIM_CCMR3_OC5PE;
+      
+     /* Configure the Output Fast mode */
+      htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5FE;
+      htim->Instance->CCMR3 |= sConfig->OCFastMode;  
+    }
+    break;
+    
+    case TIM_CHANNEL_6:
+    {
+       /* Check the parameters */
+      assert_param(IS_TIM_CC6_INSTANCE(htim->Instance)); 
+      
+     /* Configure the Channel 5 in PWM mode */
+      TIM_OC6_SetConfig(htim->Instance, sConfig);
+      
+      /* Set the Preload enable bit for channel6 */
+      htim->Instance->CCMR3 |= TIM_CCMR3_OC6PE;
+      
+     /* Configure the Output Fast mode */
+      htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6FE;
+      htim->Instance->CCMR3 |= sConfig->OCFastMode << 8;  
+    }
+    break;
+    
+    default:
+    break;    
+  }
+  
+  htim->State = HAL_TIM_STATE_READY;
+    
+  __HAL_UNLOCK(htim);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the OCRef clear feature
+  * @param  htim: TIM handle
+  * @param  sClearInputConfig: pointer to a TIM_ClearInputConfigTypeDef structure that
+  *         contains the OCREF clear feature and parameters for the TIM peripheral. 
+  * @param  Channel: specifies the TIM Channel
+  *          This parameter can be one of the following values:
+  *            @arg TIM_Channel_1: TIM Channel 1
+  *            @arg TIM_Channel_2: TIM Channel 2
+  *            @arg TIM_Channel_3: TIM Channel 3
+  *            @arg TIM_Channel_4: TIM Channel 4
+  *            @arg TIM_Channel_5: TIM Channel 5
+  *            @arg TIM_Channel_6: TIM Channel 6
+  * @retval None
+  */ 
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim,
+                                           TIM_ClearInputConfigTypeDef *sClearInputConfig,
+                                           uint32_t Channel)
+{ 
+  uint32_t tmpsmcr = 0;
+
+  /* Check the parameters */ 
+  assert_param(IS_TIM_OCXREF_CLEAR_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
+                                        
+  /* Check input state */
+  __HAL_LOCK(htim);
+  
+  switch (sClearInputConfig->ClearInputSource)
+  {
+    case TIM_CLEARINPUTSOURCE_NONE:
+    {
+      /* Clear the OCREF clear selection bit */
+      tmpsmcr &= ~TIM_SMCR_OCCS;
+      
+      /* Clear the ETR Bits */
+      tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
+      
+      /* Set TIMx_SMCR */
+      htim->Instance->SMCR = tmpsmcr;
+   }
+    break;
+    
+    case TIM_CLEARINPUTSOURCE_OCREFCLR:
+    {
+      /* Clear the OCREF clear selection bit */
+      htim->Instance->SMCR &= ~TIM_SMCR_OCCS;
+    }
+    break;
+    
+    case TIM_CLEARINPUTSOURCE_ETR:
+    {
+      /* Check the parameters */ 
+      assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
+      assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
+      assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
+      
+      TIM_ETR_SetConfig(htim->Instance,
+                        sClearInputConfig->ClearInputPrescaler,
+                        sClearInputConfig->ClearInputPolarity,
+                        sClearInputConfig->ClearInputFilter);
+      
+      /* Set the OCREF clear selection bit */
+      htim->Instance->SMCR |= TIM_SMCR_OCCS;
+    }
+    break;
+    default:  
+    break;
+  }
+  
+  switch (Channel)
+  { 
+    case TIM_CHANNEL_1:
+      {
+        if(sClearInputConfig->ClearInputState != RESET)
+        {
+          /* Enable the Ocref clear feature for Channel 1 */
+          htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
+        }
+        else
+        {
+          /* Disable the Ocref clear feature for Channel 1 */
+          htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;      
+        }
+      }    
+      break;
+    case TIM_CHANNEL_2:    
+      {
+        if(sClearInputConfig->ClearInputState != RESET)
+        {
+          /* Enable the Ocref clear feature for Channel 2 */
+          htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
+        }
+        else
+        {
+          /* Disable the Ocref clear feature for Channel 2 */
+          htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;      
+        }
+      }    
+    break;
+    case TIM_CHANNEL_3:    
+      {
+        if(sClearInputConfig->ClearInputState != RESET)
+        {
+          /* Enable the Ocref clear feature for Channel 3 */
+          htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
+        }
+        else
+        {
+          /* Disable the Ocref clear feature for Channel 3 */
+          htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;      
+        }
+      }    
+    break;
+    case TIM_CHANNEL_4:    
+      {
+        if(sClearInputConfig->ClearInputState != RESET)
+        {
+          /* Enable the Ocref clear feature for Channel 4 */
+          htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
+        }
+        else
+        {
+          /* Disable the Ocref clear feature for Channel 4 */
+          htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;      
+        }
+      }    
+    break;
+    case TIM_CHANNEL_5:    
+      {
+        if(sClearInputConfig->ClearInputState != RESET)
+        {
+          /* Enable the Ocref clear feature for Channel 1 */
+          htim->Instance->CCMR3 |= TIM_CCMR3_OC5CE;
+        }
+        else
+        {
+          /* Disable the Ocref clear feature for Channel 1 */
+          htim->Instance->CCMR3 &= ~TIM_CCMR3_OC5CE;      
+        }
+      }    
+    break;
+    case TIM_CHANNEL_6:    
+      {
+        if(sClearInputConfig->ClearInputState != RESET)
+        {
+          /* Enable the Ocref clear feature for Channel 1 */
+          htim->Instance->CCMR3 |= TIM_CCMR3_OC6CE;
+        }
+        else
+        {
+          /* Disable the Ocref clear feature for Channel 1 */
+          htim->Instance->CCMR3 &= ~TIM_CCMR3_OC6CE;      
+        }
+      }    
+    break;
+    default:  
+    break;
+  } 
+  
+  __HAL_UNLOCK(htim);
+
+  return HAL_OK;  
+}  
+
+/**
+  * @brief  Configures the TIM in master mode.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.   
+  * @param  sMasterConfig: pointer to a TIM_MasterConfigTypeDef structure that
+  *         contains the selected trigger output (TRGO) and the Master/Slave 
+  *         mode. 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig)
+{
+  uint32_t tmpcr2;  
+  uint32_t tmpsmcr;  
+
+  /* Check the parameters */
+  assert_param(IS_TIM_SYNCHRO_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
+  assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
+  
+  /* Check input state */
+  __HAL_LOCK(htim);
+
+ /* Get the TIMx CR2 register value */
+  tmpcr2 = htim->Instance->CR2;
+
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = htim->Instance->SMCR;
+
+  /* If the timer supports ADC synchronization through TRGO2, set the master mode selection 2 */
+  if (IS_TIM_TRGO2_INSTANCE(htim->Instance))
+  {
+    /* Check the parameters */
+    assert_param(IS_TIM_TRGO2_SOURCE(sMasterConfig->MasterOutputTrigger2));
+    
+    /* Clear the MMS2 bits */
+    tmpcr2 &= ~TIM_CR2_MMS2;
+    /* Select the TRGO2 source*/
+    tmpcr2 |= sMasterConfig->MasterOutputTrigger2;
+  }
+  
+  /* Reset the MMS Bits */
+  tmpcr2 &= ~TIM_CR2_MMS;
+  /* Select the TRGO source */
+  tmpcr2 |=  sMasterConfig->MasterOutputTrigger;
+
+  /* Reset the MSM Bit */
+  tmpsmcr &= ~TIM_SMCR_MSM;
+  /* Set master mode */
+  tmpsmcr |= sMasterConfig->MasterSlaveMode;
+  
+  /* Update TIMx CR2 */
+  htim->Instance->CR2 = tmpcr2;
+  
+  /* Update TIMx SMCR */
+  htim->Instance->SMCR = tmpsmcr;
+
+  __HAL_UNLOCK(htim);
+  
+  return HAL_OK;
+} 
+                                                     
+/**
+  * @brief   Configures the Break feature, dead time, Lock level, OSSI/OSSR State
+  *         and the AOE(automatic output enable).
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  sBreakDeadTimeConfig: pointer to a TIM_ConfigBreakDeadConfig_TypeDef structure that
+  *         contains the BDTR Register configuration  information for the TIM peripheral. 
+  * @retval HAL status
+  */    
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, 
+                                              TIM_BreakDeadTimeConfigTypeDef * sBreakDeadTimeConfig)
+{
+  uint32_t tmpbdtr = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_TIM_BREAK_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
+  assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
+  assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
+  assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
+  assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
+  assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
+  assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->BreakFilter));
+  assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
+  assert_param(IS_TIM_BREAK2_STATE(sBreakDeadTimeConfig->Break2State));
+  assert_param(IS_TIM_BREAK2_POLARITY(sBreakDeadTimeConfig->Break2Polarity));
+  assert_param(IS_TIM_BREAK_FILTER(sBreakDeadTimeConfig->Break2Filter));
+  
+  /* Check input state */
+  __HAL_LOCK(htim);
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+
+  /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
+     the OSSI State, the dead time value and the Automatic Output Enable Bit */
+    
+  /* Clear the BDTR bits */
+  tmpbdtr &= ~(TIM_BDTR_DTG | TIM_BDTR_LOCK |  TIM_BDTR_OSSI | 
+               TIM_BDTR_OSSR | TIM_BDTR_BKE | TIM_BDTR_BKP | 
+               TIM_BDTR_AOE | TIM_BDTR_MOE | TIM_BDTR_BKF |
+               TIM_BDTR_BK2F | TIM_BDTR_BK2E | TIM_BDTR_BK2P);
+
+  /* Set the BDTR bits */
+  tmpbdtr |= sBreakDeadTimeConfig->DeadTime;
+  tmpbdtr |= sBreakDeadTimeConfig->LockLevel;
+  tmpbdtr |= sBreakDeadTimeConfig->OffStateIDLEMode;
+  tmpbdtr |= sBreakDeadTimeConfig->OffStateRunMode;
+  tmpbdtr |= sBreakDeadTimeConfig->BreakState;
+  tmpbdtr |= sBreakDeadTimeConfig->BreakPolarity;
+  tmpbdtr |= sBreakDeadTimeConfig->AutomaticOutput;
+  tmpbdtr |= (sBreakDeadTimeConfig->BreakFilter << BDTR_BKF_SHIFT);
+  tmpbdtr |= (sBreakDeadTimeConfig->Break2Filter << BDTR_BK2F_SHIFT);
+  tmpbdtr |= sBreakDeadTimeConfig->Break2State;
+  tmpbdtr |= sBreakDeadTimeConfig->Break2Polarity;
+  
+  /* Set TIMx_BDTR */
+  htim->Instance->BDTR = tmpbdtr;
+  
+  __HAL_UNLOCK(htim);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Configures the TIM2, TIM5 and TIM11 Remapping input capabilities.
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @param  Remap: specifies the TIM input remapping source.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 input is connected to TIM8 Trigger output(default)
+  *            @arg TIM_TIM2_ETH_PTP:   TIM2 ITR1 input is connected to ETH PTP trigger output.
+  *            @arg TIM_TIM2_USBFS_SOF: TIM2 ITR1 input is connected to USB FS SOF. 
+  *            @arg TIM_TIM2_USBHS_SOF: TIM2 ITR1 input is connected to USB HS SOF. 
+  *            @arg TIM_TIM5_GPIO:      TIM5 CH4 input is connected to dedicated Timer pin(default)
+  *            @arg TIM_TIM5_LSI:       TIM5 CH4 input is connected to LSI clock.
+  *            @arg TIM_TIM5_LSE:       TIM5 CH4 input is connected to LSE clock.
+  *            @arg TIM_TIM5_RTC:       TIM5 CH4 input is connected to RTC Output event.
+  *            @arg TIM_TIM11_GPIO:     TIM11 CH4 input is connected to dedicated Timer pin(default) 
+  *            @arg TIM_TIM11_SPDIF:    SPDIF Frame synchronous   
+  *            @arg TIM_TIM11_HSE:      TIM11 CH4 input is connected to HSE_RTC clock
+  *                                     (HSE divided by a programmable prescaler) 
+  *            @arg TIM_TIM11_MCO1:     TIM11 CH1 input is connected to MCO1    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
+{
+  __HAL_LOCK(htim);
+    
+  /* Check parameters */
+  assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_REMAP(Remap));
+  
+  /* Set the Timer remapping configuration */
+  htim->Instance->OR = Remap;
+  
+  htim->State = HAL_TIM_STATE_READY;
+  
+  __HAL_UNLOCK(htim);  
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Group channel 5 and channel 1, 2 or 3
+  * @param  htim: TIM handle.
+  * @param  OCRef: specifies the reference signal(s) the OC5REF is combined with.
+  *         This parameter can be any combination of the following values:
+  *         TIM_GROUPCH5_NONE: No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC
+  *         TIM_GROUPCH5_OC1REFC: OC1REFC is the logical AND of OC1REFC and OC5REF
+  *         TIM_GROUPCH5_OC2REFC: OC2REFC is the logical AND of OC2REFC and OC5REF
+  *         TIM_GROUPCH5_OC3REFC: OC3REFC is the logical AND of OC3REFC and OC5REF
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t OCRef)
+{
+  /* Check parameters */
+  assert_param(IS_TIM_COMBINED3PHASEPWM_INSTANCE(htim->Instance));
+  assert_param(IS_TIM_GROUPCH5(OCRef));
+
+  /* Process Locked */
+  __HAL_LOCK(htim);
+  
+  htim->State = HAL_TIM_STATE_BUSY;
+  
+  /* Clear GC5Cx bit fields */
+  htim->Instance->CCR5 &= ~(TIM_CCR5_GC5C3|TIM_CCR5_GC5C2|TIM_CCR5_GC5C1);
+  
+  /* Set GC5Cx bit fields */
+  htim->Instance->CCR5 |= OCRef;
+                                   
+  htim->State = HAL_TIM_STATE_READY;                                 
+  
+  __HAL_UNLOCK(htim);
+  
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions 
+  * @brief    Extended Callbacks functions
+ *
+@verbatim   
+  ==============================================================================
+                    ##### Extension Callbacks functions #####
+  ==============================================================================  
+  [..]  
+    This section provides Extension TIM callback functions:
+    (+) Timer Commutation callback
+    (+) Timer Break callback
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Hall commutation changed callback in non blocking mode 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIMEx_CommutationCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Hall Break detection callback in non blocking mode 
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval None
+  */
+__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(htim);
+ 
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_TIMEx_BreakCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions 
+ *  @brief    Extended Peripheral State functions
+ *
+@verbatim   
+  ==============================================================================
+                ##### Extension Peripheral State functions #####
+  ==============================================================================  
+  [..]
+    This subsection permits to get in run-time the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Return the TIM Hall Sensor interface state
+  * @param  htim: pointer to a TIM_HandleTypeDef structure that contains
+  *                the configuration information for TIM module.
+  * @retval HAL state
+  */
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
+{
+  return htim->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @brief  TIM DMA Commutation callback. 
+  * @param  hdma: pointer to a DMA_HandleTypeDef structure that contains
+  *                the configuration information for the specified DMA module.
+  * @retval None
+  */
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
+{
+  TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  htim->State= HAL_TIM_STATE_READY;
+    
+  HAL_TIMEx_CommutationCallback(htim); 
+}
+
+/**
+  * @brief  Enables or disables the TIM Capture Compare Channel xN.
+  * @param  TIMx to select the TIM peripheral
+  * @param  Channel: specifies the TIM Channel
+  *          This parameter can be one of the following values:
+  *            @arg TIM_Channel_1: TIM Channel 1
+  *            @arg TIM_Channel_2: TIM Channel 2
+  *            @arg TIM_Channel_3: TIM Channel 3
+  * @param  ChannelNState: specifies the TIM Channel CCxNE bit new state.
+  *          This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. 
+  * @retval None
+  */
+static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState)
+{
+  uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_ADVANCED_INSTANCE(TIMx));
+  assert_param(IS_TIM_COMPLEMENTARY_CHANNELS(Channel));
+
+  tmp = TIM_CCER_CC1NE << Channel;
+
+  /* Reset the CCxNE Bit */
+  TIMx->CCER &= ~tmp;
+
+  /* Set or reset the CCxNE Bit */ 
+  TIMx->CCER |= (uint32_t)(ChannelNState << Channel);
+}
+
+/**
+  * @brief  Timer Output Compare 5 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config: The output configuration structure
+  * @retval None
+  */
+static void TIM_OC5_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0; 
+
+  /* Disable the output: Reset the CCxE Bit */
+  TIMx->CCER &= ~TIM_CCER_CC5E;
+  
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2; 
+  /* Get the TIMx CCMR1 register value */
+  tmpccmrx = TIMx->CCMR3;
+
+  /* Reset the Output Compare Mode Bits */
+  tmpccmrx &= ~(TIM_CCMR3_OC5M);
+  /* Select the Output Compare Mode */
+  tmpccmrx |= OC_Config->OCMode;
+  
+  /* Reset the Output Polarity level */
+  tmpccer &= ~TIM_CCER_CC5P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 16);
+
+  if(IS_TIM_BREAK_INSTANCE(TIMx))
+  {   
+    /* Reset the Output Compare IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS5;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 8);
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+  
+  /* Write to TIMx CCMR3 */
+  TIMx->CCMR3 = tmpccmrx;
+  
+  /* Set the Capture Compare Register value */
+  TIMx->CCR5 = OC_Config->Pulse;
+  
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;  
+}
+
+/**
+  * @brief  Timer Output Compare 6 configuration
+  * @param  TIMx to select the TIM peripheral
+  * @param  OC_Config: The output configuration structure
+  * @retval None
+  */
+static void TIM_OC6_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
+{
+  uint32_t tmpccmrx = 0;
+  uint32_t tmpccer = 0;
+  uint32_t tmpcr2 = 0; 
+
+  /* Disable the output: Reset the CCxE Bit */
+  TIMx->CCER &= ~TIM_CCER_CC6E;
+  
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2; 
+  /* Get the TIMx CCMR1 register value */
+  tmpccmrx = TIMx->CCMR3;
+    
+  /* Reset the Output Compare Mode Bits */
+  tmpccmrx &= ~(TIM_CCMR3_OC6M);
+  /* Select the Output Compare Mode */
+  tmpccmrx |= (OC_Config->OCMode << 8);
+  
+  /* Reset the Output Polarity level */
+  tmpccer &= (uint32_t)~TIM_CCER_CC6P;
+  /* Set the Output Compare Polarity */
+  tmpccer |= (OC_Config->OCPolarity << 20);
+
+  if(IS_TIM_BREAK_INSTANCE(TIMx))
+  {   
+    /* Reset the Output Compare IDLE State */
+    tmpcr2 &= ~TIM_CR2_OIS6;
+    /* Set the Output Idle state */
+    tmpcr2 |= (OC_Config->OCIdleState << 10);
+  }
+  
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+  
+  /* Write to TIMx CCMR3 */
+  TIMx->CCMR3 = tmpccmrx;
+  
+  /* Set the Capture Compare Register value */
+  TIMx->CCR6 = OC_Config->Pulse;
+  
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;  
+} 
+
+/**
+  * @}
+  */
+
+#endif /* HAL_TIM_MODULE_ENABLED */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_tim_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,552 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_tim_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of TIM HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_TIM_EX_H
+#define __STM32F7xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup TIMEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup TIMEx_Exported_Types TIM Exported Types
+  * @{
+  */
+  
+/** 
+  * @brief  TIM Hall sensor Configuration Structure definition  
+  */
+
+typedef struct
+{
+                                  
+  uint32_t IC1Polarity;            /*!< Specifies the active edge of the input signal.
+                                        This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+                                                                   
+  uint32_t IC1Prescaler;        /*!< Specifies the Input Capture Prescaler.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+                                  
+  uint32_t IC1Filter;           /*!< Specifies the input capture filter.
+                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  
+  uint32_t Commutation_Delay;  /*!< Specifies the pulse value to be loaded into the Capture Compare Register. 
+                                    This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */                              
+} TIM_HallSensor_InitTypeDef;
+
+/** 
+  * @brief  TIM Master configuration Structure definition  
+  */ 
+typedef struct {
+  uint32_t  MasterOutputTrigger;   /*!< Trigger output (TRGO) selection. 
+                                      This parameter can be a value of @ref TIM_Master_Mode_Selection */ 
+  uint32_t  MasterOutputTrigger2;  /*!< Trigger output2 (TRGO2) selection 
+                                      This parameter can be a value of @ref TIMEx_Master_Mode_Selection_2 */
+  uint32_t  MasterSlaveMode;       /*!< Master/slave mode selection. 
+                                      This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/** 
+  * @brief  TIM Break input(s) and Dead time configuration Structure definition  
+  * @note   2 break inputs can be configured (BKIN and BKIN2) with configurable 
+  *        filter and polarity.
+  */ 
+typedef struct
+{
+  uint32_t OffStateRunMode;	        /*!< TIM off state in run mode.
+                                       This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+  uint32_t OffStateIDLEMode;	    /*!< TIM off state in IDLE mode.
+                                       This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+  uint32_t LockLevel;	 	        /*!< TIM Lock level.
+                                       This parameter can be a value of @ref TIM_Lock_level */                             
+  uint32_t DeadTime;	 	        /*!< TIM dead Time.
+                                       This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+  uint32_t BreakState;	 	        /*!< TIM Break State.
+                                       This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+  uint32_t BreakPolarity;           /*!< TIM Break input polarity.
+                                       This parameter can be a value of @ref TIM_Break_Polarity */
+  uint32_t BreakFilter;             /*!< Specifies the break input filter.
+                                       This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  
+  uint32_t Break2State;	 	        /*!< TIM Break2 State 
+                                       This parameter can be a value of @ref TIMEx_Break2_Input_enable_disable */
+  uint32_t Break2Polarity;          /*!< TIM Break2 input polarity 
+                                       This parameter can be a value of @ref TIMEx_Break2_Polarity */
+  uint32_t Break2Filter;            /*!< TIM break2 input filter.
+                                       This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  
+  uint32_t AutomaticOutput;         /*!< TIM Automatic Output Enable state 
+                                       This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */           
+} TIM_BreakDeadTimeConfigTypeDef;
+
+/**
+  * @}
+  */  
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants  TIMEx Exported Constants
+  * @{
+  */
+  
+/** @defgroup TIMEx_Channel TIMEx Channel
+  * @{
+  */
+
+#define TIM_CHANNEL_1                      ((uint32_t)0x0000)
+#define TIM_CHANNEL_2                      ((uint32_t)0x0004)
+#define TIM_CHANNEL_3                      ((uint32_t)0x0008)
+#define TIM_CHANNEL_4                      ((uint32_t)0x000C)
+#define TIM_CHANNEL_5                      ((uint32_t)0x0010)
+#define TIM_CHANNEL_6                      ((uint32_t)0x0014)
+#define TIM_CHANNEL_ALL                    ((uint32_t)0x003C)
+                                 
+/**
+  * @}
+  */ 
+    
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes TIMEx Output Compare and PWM Modes
+  * @{
+  */
+#define TIM_OCMODE_TIMING                   ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE                   ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE                 ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE                   ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_PWM1                     ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM2                     ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_ACTIVE            ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_INACTIVE          ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define TIM_OCMODE_RETRIGERRABLE_OPM1      ((uint32_t)TIM_CCMR1_OC1M_3)
+#define TIM_OCMODE_RETRIGERRABLE_OPM2      ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_COMBINED_PWM1           ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_COMBINED_PWM2           ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM1         ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM2         ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M)
+/**
+  * @}
+  */
+      
+/** @defgroup TIMEx_Remap  TIMEx Remap
+  * @{
+  */
+#define TIM_TIM2_TIM8_TRGO                     (0x00000000)
+#define TIM_TIM2_ETH_PTP                       (0x00000400)
+#define TIM_TIM2_USBFS_SOF                     (0x00000800)
+#define TIM_TIM2_USBHS_SOF                     (0x00000C00)
+#define TIM_TIM5_GPIO                          (0x00000000)
+#define TIM_TIM5_LSI                           (0x00000040)
+#define TIM_TIM5_LSE                           (0x00000080)
+#define TIM_TIM5_RTC                           (0x000000C0)
+#define TIM_TIM11_GPIO                         (0x00000000)
+#define TIM_TIM11_SPDIFRX                      (0x00000001)
+#define TIM_TIM11_HSE                          (0x00000002)
+#define TIM_TIM11_MCO1                         (0x00000003)
+/**
+  * @}
+  */	
+
+/** @defgroup TIMEx_ClearInput_Source TIMEx Clear Input Source
+  * @{
+  */
+#define TIM_CLEARINPUTSOURCE_ETR            ((uint32_t)0x0001) 
+#define TIM_CLEARINPUTSOURCE_OCREFCLR       ((uint32_t)0x0002) 
+#define TIM_CLEARINPUTSOURCE_NONE           ((uint32_t)0x0000)
+/**
+  * @}
+  */
+  
+/** @defgroup TIMEx_Break2_Input_enable_disable  TIMEx Break input 2 Enable
+  * @{
+  */                         
+#define TIM_BREAK2_DISABLE         ((uint32_t)0x00000000)
+#define TIM_BREAK2_ENABLE          ((uint32_t)TIM_BDTR_BK2E)
+/**
+  * @}
+  */
+    
+/** @defgroup TIMEx_Break2_Polarity TIMEx Break2 Polarity
+  * @{
+  */
+#define TIM_BREAK2POLARITY_LOW        ((uint32_t)0x00000000)
+#define TIM_BREAK2POLARITY_HIGH       (TIM_BDTR_BK2P)
+/**
+  * @}
+  */
+ 
+/** @defgroup TIMEx_Group_Channel5 TIMEx Group Channel 5 and Channel 1, 2 or 3
+  * @{
+  */
+#define TIM_GROUPCH5_NONE       (uint32_t)0x00000000  /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define TIM_GROUPCH5_OC1REFC    (TIM_CCR5_GC5C1)      /* !< OC1REFC is the logical AND of OC1REFC and OC5REF */
+#define TIM_GROUPCH5_OC2REFC    (TIM_CCR5_GC5C2)      /* !< OC2REFC is the logical AND of OC2REFC and OC5REF */
+#define TIM_GROUPCH5_OC3REFC    (TIM_CCR5_GC5C3)       /* !< OC3REFC is the logical AND of OC3REFC and OC5REF */
+/**
+  * @}
+  */
+	
+/** @defgroup TIMEx_Master_Mode_Selection_2 TIMEx Master Mode Selection 2 (TRGO2)
+  * @{
+  */  
+#define	TIM_TRGO2_RESET                          ((uint32_t)0x00000000)             
+#define	TIM_TRGO2_ENABLE                         ((uint32_t)(TIM_CR2_MMS2_0))          
+#define	TIM_TRGO2_UPDATE                         ((uint32_t)(TIM_CR2_MMS2_1))
+#define	TIM_TRGO2_OC1                            ((uint32_t)(TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))   
+#define	TIM_TRGO2_OC1REF                         ((uint32_t)(TIM_CR2_MMS2_2))           
+#define	TIM_TRGO2_OC2REF                         ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))          
+#define	TIM_TRGO2_OC3REF                         ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1))           
+#define	TIM_TRGO2_OC4REF                         ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))  
+#define	TIM_TRGO2_OC5REF                         ((uint32_t)(TIM_CR2_MMS2_3))   
+#define	TIM_TRGO2_OC6REF                         ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0))   
+#define	TIM_TRGO2_OC4REF_RISINGFALLING           ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1))   
+#define	TIM_TRGO2_OC6REF_RISINGFALLING           ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))   
+#define	TIM_TRGO2_OC4REF_RISING_OC6REF_RISING    ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2))   
+#define	TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING   ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))   
+#define	TIM_TRGO2_OC5REF_RISING_OC6REF_RISING    ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1))   
+#define	TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING   ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))   
+/**
+  * @}
+  */ 
+    
+/** @defgroup TIMEx_Slave_Mode TIMEx Slave mode
+  * @{
+  */
+#define TIM_SLAVEMODE_DISABLE                ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET                  ((uint32_t)(TIM_SMCR_SMS_2))
+#define TIM_SLAVEMODE_GATED                  ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_TRIGGER                ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1))
+#define TIM_SLAVEMODE_EXTERNAL1              ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER  ((uint32_t)(TIM_SMCR_SMS_3))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIMEx Exported Macros
+  * @{
+  */  
+
+/**
+  * @brief  Sets the TIM Capture Compare Register value on runtime without
+  *         calling another time ConfigChannel function.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__ : TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  *            @arg TIM_CHANNEL_5: TIM Channel 5 selected
+  *            @arg TIM_CHANNEL_6: TIM Channel 6 selected
+  * @param  __COMPARE__: specifies the Capture Compare register new value.
+  * @retval None
+  */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->CCR6 = (__COMPARE__)))
+
+/**
+  * @brief  Gets the TIM Capture Compare Register value on runtime
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__ : TIM Channel associated with the capture compare register
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: get capture/compare 1 register value
+  *            @arg TIM_CHANNEL_2: get capture/compare 2 register value
+  *            @arg TIM_CHANNEL_3: get capture/compare 3 register value
+  *            @arg TIM_CHANNEL_4: get capture/compare 4 register value
+  *            @arg TIM_CHANNEL_5: get capture/compare 5 register value
+  *            @arg TIM_CHANNEL_6: get capture/compare 6 register value
+  * @retval None
+  */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\
+ ((__HANDLE__)->Instance->CCR6))
+
+/**
+  * @}
+  */ 
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1
+  * @{
+  */
+/*  Timer Hall Sensor functions  **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2
+  * @{
+  */
+/*  Timer Complementary Output Compare functions  *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3
+  * @{
+  */
+/*  Timer Complementary PWM functions  ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4
+  * @{
+  */
+/*  Timer Complementary One Pulse functions  **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5
+  * @{
+  */
+/* Extension Control functions  ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t OCRef);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6
+  * @{
+  */ 
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+  * @}
+  */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7
+  * @{
+  */
+/* Extension Peripheral State functions  **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIMEx Private Macros
+  * @{
+  */
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                  ((CHANNEL) == TIM_CHANNEL_2) || \
+                                  ((CHANNEL) == TIM_CHANNEL_3) || \
+                                  ((CHANNEL) == TIM_CHANNEL_4) || \
+                                  ((CHANNEL) == TIM_CHANNEL_5) || \
+                                  ((CHANNEL) == TIM_CHANNEL_6) || \
+                                  ((CHANNEL) == TIM_CHANNEL_ALL))
+                                 
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                       ((CHANNEL) == TIM_CHANNEL_2))
+                                      
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                      ((CHANNEL) == TIM_CHANNEL_2))                                       
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                                ((CHANNEL) == TIM_CHANNEL_2) || \
+                                                ((CHANNEL) == TIM_CHANNEL_3))
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1)               || \
+	                       ((MODE) == TIM_OCMODE_PWM2)               || \
+                               ((MODE) == TIM_OCMODE_COMBINED_PWM1)      || \
+                               ((MODE) == TIM_OCMODE_COMBINED_PWM2)      || \
+                               ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM1)    || \
+                               ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM2))
+                              
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING)             || \
+                             ((MODE) == TIM_OCMODE_ACTIVE)             || \
+                             ((MODE) == TIM_OCMODE_INACTIVE)           || \
+                             ((MODE) == TIM_OCMODE_TOGGLE)             || \
+                             ((MODE) == TIM_OCMODE_FORCED_ACTIVE)      || \
+                             ((MODE) == TIM_OCMODE_FORCED_INACTIVE)    || \
+                             ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \
+                             ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM2))
+#define IS_TIM_REMAP(__TIM_REMAP__)	 (((__TIM_REMAP__) == TIM_TIM2_TIM8_TRGO)||\
+                                      ((__TIM_REMAP__) == TIM_TIM2_ETH_PTP)||\
+                                      ((__TIM_REMAP__) == TIM_TIM2_USBFS_SOF)||\
+                                      ((__TIM_REMAP__) == TIM_TIM2_USBHS_SOF)||\
+                                      ((__TIM_REMAP__) == TIM_TIM5_GPIO)||\
+                                      ((__TIM_REMAP__) == TIM_TIM5_LSI)||\
+                                      ((__TIM_REMAP__) == TIM_TIM5_LSE)||\
+                                      ((__TIM_REMAP__) == TIM_TIM5_RTC)||\
+                                      ((__TIM_REMAP__) == TIM_TIM11_GPIO)||\
+                                      ((__TIM_REMAP__) == TIM_TIM11_SPDIFRX)||\
+                                      ((__TIM_REMAP__) == TIM_TIM11_HSE)||\
+                                      ((__TIM_REMAP__) == TIM_TIM11_MCO1))  
+#define IS_TIM_DEADTIME(__DEADTIME__)      ((__DEADTIME__) <= 0xFF) 
+#define IS_TIM_BREAK_FILTER(__FILTER__) ((__FILTER__) <= 0xF)
+#define IS_TIM_CLEARINPUT_SOURCE(MODE) (((MODE) == TIM_CLEARINPUTSOURCE_ETR)      || \
+                                        ((MODE) == TIM_CLEARINPUTSOURCE_OCREFCLR)  || \
+                                        ((MODE) == TIM_CLEARINPUTSOURCE_NONE))
+#define IS_TIM_BREAK2_STATE(STATE) (((STATE) == TIM_BREAK2_ENABLE) || \
+                                    ((STATE) == TIM_BREAK2_DISABLE))
+#define IS_TIM_BREAK2_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAK2POLARITY_LOW) || \
+                                              ((__POLARITY__) == TIM_BREAK2POLARITY_HIGH))
+#define IS_TIM_GROUPCH5(OCREF) ((((OCREF) & 0x1FFFFFFF) == 0x00000000))
+#define IS_TIM_TRGO2_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO2_RESET)                        || \
+                                     ((SOURCE) == TIM_TRGO2_ENABLE)                       || \
+                                     ((SOURCE) == TIM_TRGO2_UPDATE)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC1)                          || \
+                                     ((SOURCE) == TIM_TRGO2_OC1REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC2REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC3REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC3REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC4REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC5REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC6REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC4REF_RISINGFALLING)         || \
+                                     ((SOURCE) == TIM_TRGO2_OC6REF_RISINGFALLING)         || \
+                                     ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING)  || \
+                                     ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \
+                                     ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING)  || \
+                                     ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING))
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE)   || \
+                                 ((MODE) == TIM_SLAVEMODE_RESET)     || \
+                                 ((MODE) == TIM_SLAVEMODE_GATED)     || \
+                                 ((MODE) == TIM_SLAVEMODE_TRIGGER)   || \
+                                 ((MODE) == TIM_SLAVEMODE_EXTERNAL1) || \
+                                 ((MODE) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
+
+/**
+  * @}
+  */  
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIMEx Private Functions
+  * @{
+  */
+  
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+    
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_uart.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,2010 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_uart.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   UART HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions  
+  *           + Peripheral State and Errors functions  
+  *           
+  @verbatim       
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    The UART HAL driver can be used as follows:
+    
+    (#) Declare a UART_HandleTypeDef handle structure.
+  
+    (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API:
+        (##) Enable the USARTx interface clock.
+        (##) UART pins configuration:
+            (+++) Enable the clock for the UART GPIOs.
+            (+++) Configure these UART pins as alternate function pull-up.
+        (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT()
+             and HAL_UART_Receive_IT() APIs):
+            (+++) Configure the USARTx interrupt priority.
+            (+++) Enable the NVIC USART IRQ handle.
+        (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA()
+             and HAL_UART_Receive_DMA() APIs):
+            (+++) Declare a DMA handle structure for the Tx/Rx stream.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required 
+                  Tx/Rx parameters.                
+            (+++) Configure the DMA Tx/Rx Stream.
+            (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete 
+                  interrupt on the DMA Tx/Rx Stream.
+
+    (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware 
+        flow control and Mode(Receiver/Transmitter) in the Init structure.
+
+    (#) For the UART asynchronous mode, initialize the UART registers by calling
+        the HAL_UART_Init() API.
+    
+    (#) For the UART Half duplex mode, initialize the UART registers by calling 
+        the HAL_HalfDuplex_Init() API.
+    
+    (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API.
+    
+    (#) For the Multi-Processor mode, initialize the UART registers by calling 
+        the HAL_MultiProcessor_Init() API.
+        
+     [..] 
+       (@) The specific UART interrupts (Transmission complete interrupt, 
+            RXNE interrupt and Error Interrupts) will be managed using the macros
+            __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit 
+            and receive process.
+          
+     [..] 
+       (@) These APIs (HAL_UART_Init() and HAL_HalfDuplex_Init()) configure also the 
+            low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customized 
+            HAL_UART_MspInit() API.
+          
+     [..] 
+        Three operation modes are available within this driver :     
+  
+     *** Polling mode IO operation ***
+     =================================
+     [..]    
+       (+) Send an amount of data in blocking mode using HAL_UART_Transmit() 
+       (+) Receive an amount of data in blocking mode using HAL_UART_Receive()
+       
+     *** Interrupt mode IO operation ***    
+     ===================================
+     [..]    
+       (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT() 
+       (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can 
+            add his own code by customization of function pointer HAL_UART_TxCpltCallback
+       (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT() 
+       (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can 
+            add his own code by customization of function pointer HAL_UART_RxCpltCallback
+       (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can 
+            add his own code by customization of function pointer HAL_UART_ErrorCallback
+
+     *** DMA mode IO operation ***    
+     ==============================
+     [..] 
+       (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA() 
+       (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can 
+            add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback 
+       (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can 
+            add his own code by customization of function pointer HAL_UART_TxCpltCallback
+       (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA() 
+       (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can 
+            add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback 
+       (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can 
+            add his own code by customization of function pointer HAL_UART_RxCpltCallback
+       (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can 
+            add his own code by customization of function pointer HAL_UART_ErrorCallback
+       (+) Pause the DMA Transfer using HAL_UART_DMAPause()      
+       (+) Resume the DMA Transfer using HAL_UART_DMAResume()  
+       (+) Stop the DMA Transfer using HAL_UART_DMAStop()      
+    
+     *** UART HAL driver macros list ***
+     ============================================= 
+     [..]
+       Below the list of most used macros in UART HAL driver.
+       
+      (+) __HAL_UART_ENABLE: Enable the UART peripheral 
+      (+) __HAL_UART_DISABLE: Disable the UART peripheral     
+      (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not
+      (+) __HAL_UART_CLEAR_IT : Clears the specified UART ISR flag
+      (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt
+      (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt
+      (+) __HAL_UART_GET_IT_SOURCE: Check whether the specified UART interrupt has occurred or not
+      
+     [..] 
+       (@) You can refer to the UART HAL driver header file for more useful macros 
+      
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup UART UART
+  * @brief HAL UART module driver
+  * @{
+  */
+#ifdef HAL_UART_MODULE_ENABLED
+    
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define UART_CR1_FIELDS  ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \
+                                     USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8))
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void UART_DMAError(DMA_HandleTypeDef *hdma); 
+static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart);
+static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart);
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup UART_Exported_Functions UART Exported Functions
+  * @{
+  */
+
+/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions 
+  *  @brief    Initialization and Configuration functions 
+  *
+@verbatim    
+===============================================================================
+            ##### Initialization and Configuration functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to initialize the USARTx or the UARTy 
+    in asynchronous mode.
+      (+) For the asynchronous mode only these parameters can be configured: 
+        (++) Baud Rate
+        (++) Word Length 
+        (++) Stop Bit
+        (++) Parity: If the parity is enabled, then the MSB bit of the data written
+             in the data register is transmitted but is changed by the parity bit.
+             Depending on the frame length defined by the M bit (8-bits or 9-bits),
+             please refer to Reference manual for possible UART frame formats.           
+        (++) Hardware flow control
+        (++) Receiver/transmitter modes
+        (++) Over Sampling Method
+    [..]
+    The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs 
+    follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor
+    configuration procedures (details for the procedures are available in reference manual (RM0329)).
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Initializes the UART mode according to the specified
+  *         parameters in the UART_InitTypeDef and creates the associated handle .
+  * @param huart: uart handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart)
+{
+  /* Check the UART handle allocation */
+  if(huart == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE)
+  {
+    /* Check the parameters */
+    assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance));
+  }
+  else
+  {
+    /* Check the parameters */
+    assert_param(IS_UART_INSTANCE(huart->Instance));
+  }
+  
+  if(huart->State == HAL_UART_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    huart->Lock = HAL_UNLOCKED;
+
+    /* Init the low level hardware : GPIO, CLOCK */
+    HAL_UART_MspInit(huart);
+  }
+
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /* Disable the Peripheral */
+  __HAL_UART_DISABLE(huart);
+  
+  /* Set the UART Communication parameters */
+  if (UART_SetConfig(huart) == HAL_ERROR)
+  {
+    return HAL_ERROR;
+  }
+
+  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+  {
+    UART_AdvFeatureConfig(huart);
+  }
+
+  /* In asynchronous mode, the following bits must be kept cleared:
+  - LINEN and CLKEN bits in the USART_CR2 register,
+  - SCEN, HDSEL and IREN  bits in the USART_CR3 register.*/
+  huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
+  huart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
+
+  /* Enable the Peripheral */
+  __HAL_UART_ENABLE(huart);
+
+  /* TEACK and/or REACK to check before moving huart->State to Ready */
+  return (UART_CheckIdleState(huart));
+}
+
+/**
+  * @brief Initializes the half-duplex mode according to the specified
+  *         parameters in the UART_InitTypeDef and creates the associated handle .
+  * @param huart: UART handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart)
+{
+  /* Check the UART handle allocation */
+  if(huart == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  if(huart->State == HAL_UART_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    huart->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK */
+    HAL_UART_MspInit(huart);
+  }
+
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /* Disable the Peripheral */
+  __HAL_UART_DISABLE(huart);
+
+  /* Set the UART Communication parameters */
+  if (UART_SetConfig(huart) == HAL_ERROR)
+  {
+    return HAL_ERROR;
+  }
+
+  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+  {
+    UART_AdvFeatureConfig(huart);
+  }
+
+  /* In half-duplex mode, the following bits must be kept cleared:
+  - LINEN and CLKEN bits in the USART_CR2 register,
+  - SCEN and IREN bits in the USART_CR3 register.*/
+  huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
+  huart->Instance->CR3 &= ~(USART_CR3_IREN | USART_CR3_SCEN);
+
+  /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
+  huart->Instance->CR3 |= USART_CR3_HDSEL;
+
+  /* Enable the Peripheral */
+  __HAL_UART_ENABLE(huart);
+
+  /* TEACK and/or REACK to check before moving huart->State to Ready */
+  return (UART_CheckIdleState(huart));
+}
+
+
+/**
+  * @brief Initializes the LIN mode according to the specified
+  *         parameters in the UART_InitTypeDef and creates the associated handle .
+  * @param huart: uart handle
+  * @param BreakDetectLength: specifies the LIN break detection length.
+  *        This parameter can be one of the following values:
+  *          @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection
+  *          @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength)
+{
+  /* Check the UART handle allocation */
+  if(huart == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_UART_INSTANCE(huart->Instance));
+  assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength));
+  assert_param(IS_LIN_WORD_LENGTH(huart->Init.WordLength));
+  	
+  if(huart->State == HAL_UART_STATE_RESET)
+  {  
+    /* Allocate lock resource and initialize it */
+    huart->Lock = HAL_UNLOCKED; 
+    /* Init the low level hardware : GPIO, CLOCK */
+    HAL_UART_MspInit(huart);
+  }
+  
+  huart->State = HAL_UART_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_UART_DISABLE(huart);
+  
+  /* Set the UART Communication parameters */
+  if (UART_SetConfig(huart) == HAL_ERROR)
+  {
+    return HAL_ERROR;
+  } 
+  
+  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+  {
+    UART_AdvFeatureConfig(huart);
+  }
+  
+  /* In LIN mode, the following bits must be kept cleared: 
+  - LINEN and CLKEN bits in the USART_CR2 register,
+  - SCEN and IREN bits in the USART_CR3 register.*/
+  huart->Instance->CR2 &= ~(USART_CR2_CLKEN);
+  huart->Instance->CR3 &= ~(USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN);
+  
+  /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
+  huart->Instance->CR2 |= USART_CR2_LINEN;
+  
+  /* Set the USART LIN Break detection length. */
+  MODIFY_REG(huart->Instance->CR2, USART_CR2_LBDL, BreakDetectLength);
+  
+    /* Enable the Peripheral */
+  __HAL_UART_ENABLE(huart);
+  
+  /* TEACK and/or REACK to check before moving huart->State to Ready */
+  return (UART_CheckIdleState(huart));
+}
+
+
+
+/**
+  * @brief Initializes the multiprocessor mode according to the specified
+  *         parameters in the UART_InitTypeDef and creates the associated handle.
+  * @param huart: UART handle   
+  * @param Address: UART node address (4-, 6-, 7- or 8-bit long)
+  * @param WakeUpMethod: specifies the UART wakeup method.
+  *        This parameter can be one of the following values:
+  *          @arg UART_WAKEUPMETHOD_IDLELINE: WakeUp by an idle line detection
+  *          @arg UART_WAKEUPMETHOD_ADDRESSMARK: WakeUp by an address mark
+  * @note  If the user resorts to idle line detection wake up, the Address parameter
+  *        is useless and ignored by the initialization function.               
+  * @note  If the user resorts to address mark wake up, the address length detection 
+  *        is configured by default to 4 bits only. For the UART to be able to 
+  *        manage 6-, 7- or 8-bit long addresses detection                    
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod)
+{
+  /* Check the UART handle allocation */
+  if(huart == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the wake up method parameter */
+  assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod));
+  
+  if(huart->State == HAL_UART_STATE_RESET)
+  { 
+    /* Allocate lock resource and initialize it */
+    huart->Lock = HAL_UNLOCKED;  
+    /* Init the low level hardware : GPIO, CLOCK */
+    HAL_UART_MspInit(huart);
+  }
+  
+  huart->State = HAL_UART_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_UART_DISABLE(huart);
+  
+  /* Set the UART Communication parameters */
+  if (UART_SetConfig(huart) == HAL_ERROR)
+  {
+    return HAL_ERROR;
+  } 
+  
+  if (huart->AdvancedInit.AdvFeatureInit != UART_ADVFEATURE_NO_INIT)
+  {
+    UART_AdvFeatureConfig(huart);
+  }
+  
+  /* In multiprocessor mode, the following bits must be kept cleared: 
+  - LINEN and CLKEN bits in the USART_CR2 register,
+  - SCEN, HDSEL and IREN  bits in the USART_CR3 register. */
+  huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
+  huart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
+  
+  if (WakeUpMethod == UART_WAKEUPMETHOD_ADDRESSMARK)
+  {
+    /* If address mark wake up method is chosen, set the USART address node */
+    MODIFY_REG(huart->Instance->CR2, USART_CR2_ADD, ((uint32_t)Address << UART_CR2_ADDRESS_LSB_POS));
+  }
+  
+  /* Set the wake up method by setting the WAKE bit in the CR1 register */
+  MODIFY_REG(huart->Instance->CR1, USART_CR1_WAKE, WakeUpMethod);
+  
+  /* Enable the Peripheral */
+  __HAL_UART_ENABLE(huart); 
+  
+  /* TEACK and/or REACK to check before moving huart->State to Ready */
+  return (UART_CheckIdleState(huart));
+}
+
+
+
+
+/**
+  * @brief DeInitializes the UART peripheral 
+  * @param huart: uart handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart)
+{
+  /* Check the UART handle allocation */
+  if(huart == NULL)
+  {
+    return HAL_ERROR;
+  }
+  
+  /* Check the parameters */
+  assert_param(IS_UART_INSTANCE(huart->Instance));
+
+  huart->State = HAL_UART_STATE_BUSY;
+  
+  /* Disable the Peripheral */
+  __HAL_UART_DISABLE(huart);
+  
+  huart->Instance->CR1 = 0x0;
+  huart->Instance->CR2 = 0x0;
+  huart->Instance->CR3 = 0x0;
+  
+  /* DeInit the low level hardware */
+  HAL_UART_MspDeInit(huart);
+
+  huart->ErrorCode = HAL_UART_ERROR_NONE;
+  huart->State = HAL_UART_STATE_RESET;
+  
+  /* Process Unlock */
+  __HAL_UNLOCK(huart);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief UART MSP Init
+  * @param huart: uart handle
+  * @retval None
+  */
+ __weak void HAL_UART_MspInit(UART_HandleTypeDef *huart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(huart);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_UART_MspInit can be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief UART MSP DeInit
+  * @param huart: uart handle
+  * @retval None
+  */
+ __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(huart);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_UART_MspDeInit can be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup UART_Exported_Functions_Group2 IO operation functions 
+  *  @brief UART Transmit/Receive functions 
+  *
+@verbatim   
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    This subsection provides a set of functions allowing to manage the UART asynchronous
+    and Half duplex data transfers.
+
+    (#) There are two mode of transfer:
+       (+) Blocking mode: The communication is performed in polling mode. 
+            The HAL status of all data processing is returned by the same function 
+            after finishing transfer.  
+       (+) No-Blocking mode: The communication is performed using Interrupts 
+           or DMA, These API's return the HAL status.
+           The end of the data processing will be indicated through the 
+           dedicated UART IRQ when using Interrupt mode or the DMA IRQ when 
+           using DMA mode.
+           The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks 
+           will be executed respectively at the end of the transmit or Receive process
+           The HAL_UART_ErrorCallback()user callback will be executed when a communication error is detected
+
+    (#) Blocking mode API's are :
+        (+) HAL_UART_Transmit()
+        (+) HAL_UART_Receive() 
+        
+    (#) Non-Blocking mode API's with Interrupt are :
+        (+) HAL_UART_Transmit_IT()
+        (+) HAL_UART_Receive_IT()
+        (+) HAL_UART_IRQHandler()
+        (+) UART_Transmit_IT()
+        (+) UART_Receive_IT()
+
+    (#) No-Blocking mode API's with DMA are :
+        (+) HAL_UART_Transmit_DMA()
+        (+) HAL_UART_Receive_DMA()
+        (+) HAL_UART_DMAPause()
+        (+) HAL_UART_DMAResume()
+        (+) HAL_UART_DMAStop()
+
+    (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+        (+) HAL_UART_TxHalfCpltCallback()
+        (+) HAL_UART_TxCpltCallback()
+        (+) HAL_UART_RxHalfCpltCallback()
+        (+) HAL_UART_RxCpltCallback()
+        (+) HAL_UART_ErrorCallback()
+
+
+    -@- In the Half duplex communication, it is forbidden to run the transmit 
+        and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX can't be useful.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Send an amount of data in blocking mode 
+  * @param huart: uart handle
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be sent
+  * @param Timeout : Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+   uint16_t* tmp;
+
+  if((huart->State == HAL_UART_STATE_READY) || (huart->State == HAL_UART_STATE_BUSY_RX))
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(huart);
+
+    huart->ErrorCode = HAL_UART_ERROR_NONE;
+    /* Check if a non-blocking receive process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_RX) 
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX;
+    }
+
+    huart->TxXferSize = Size;
+    huart->TxXferCount = Size;
+    while(huart->TxXferCount > 0)
+    {
+      huart->TxXferCount--;
+        if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK)  
+        { 
+          return HAL_TIMEOUT;
+        }
+      if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+      {
+        tmp = (uint16_t*) pData;
+        huart->Instance->TDR = (*tmp & (uint16_t)0x01FF);
+        pData += 2;
+      }
+      else
+      {
+        huart->Instance->TDR = (*pData++ & (uint8_t)0xFF);
+      }
+    }
+    if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, Timeout) != HAL_OK)  
+    { 
+      return HAL_TIMEOUT;
+    }
+    /* Check if a non-blocking receive Process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX_RX) 
+    {
+      huart->State = HAL_UART_STATE_BUSY_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_READY;
+    }
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(huart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in blocking mode 
+  * @param huart: uart handle
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be received
+  * @param Timeout : Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+  uint16_t uhMask;
+
+  if((huart->State == HAL_UART_STATE_READY) || (huart->State == HAL_UART_STATE_BUSY_TX))
+  {
+    if((pData == NULL ) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(huart);
+
+    huart->ErrorCode = HAL_UART_ERROR_NONE;
+    /* Check if a non-blocking transmit process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX)
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_BUSY_RX;
+    }
+
+    huart->RxXferSize = Size; 
+    huart->RxXferCount = Size;
+
+    /* Computation of UART mask to apply to RDR register */
+    UART_MASK_COMPUTATION(huart);
+    uhMask = huart->Mask;
+
+    /* as long as data have to be received */
+    while(huart->RxXferCount > 0)
+    {
+      huart->RxXferCount--;
+        if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK)  
+        {
+          return HAL_TIMEOUT;
+        }
+      if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+      {
+        tmp = (uint16_t*) pData ;
+        *tmp = (uint16_t)(huart->Instance->RDR & uhMask);
+        pData +=2; 
+      }
+      else
+      {
+        *pData++ = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); 
+      }
+    }
+
+    /* Check if a non-blocking transmit Process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX_RX) 
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_READY;
+    }
+    /* Process Unlocked */
+    __HAL_UNLOCK(huart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Send an amount of data in interrupt mode 
+  * @param huart: uart handle
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{  
+  if((huart->State == HAL_UART_STATE_READY) || (huart->State == HAL_UART_STATE_BUSY_RX))
+  {
+    if((pData == NULL ) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(huart);
+    
+    huart->pTxBuffPtr = pData;
+    huart->TxXferSize = Size;
+    huart->TxXferCount = Size;
+    
+    huart->ErrorCode = HAL_UART_ERROR_NONE;
+    /* Check if a receive process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_RX) 
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX;
+    }
+    
+    /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(huart);    
+    
+    /* Enable the UART Transmit Data Register Empty Interrupt */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_TXE);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;   
+  }
+}
+
+/**
+  * @brief Receive an amount of data in interrupt mode 
+  * @param huart: uart handle
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+  if((huart->State == HAL_UART_STATE_READY) || (huart->State == HAL_UART_STATE_BUSY_TX))
+  {
+    if((pData == NULL ) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(huart);
+
+    huart->pRxBuffPtr = pData;
+    huart->RxXferSize = Size;
+    huart->RxXferCount = Size;
+
+    /* Computation of UART mask to apply to RDR register */
+    UART_MASK_COMPUTATION(huart);
+
+    huart->ErrorCode = HAL_UART_ERROR_NONE;
+    /* Check if a transmit process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX) 
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_BUSY_RX;
+    }
+
+    /* Enable the UART Parity Error Interrupt */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_PE);
+
+    /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(huart);
+
+    /* Enable the UART Data Register not empty Interrupt */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief Send an amount of data in DMA mode 
+  * @param huart: uart handle
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  
+  if((huart->State == HAL_UART_STATE_READY) || (huart->State == HAL_UART_STATE_BUSY_RX))
+  {
+    if((pData == NULL ) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(huart);
+    
+    huart->pTxBuffPtr = pData;
+    huart->TxXferSize = Size;
+    huart->TxXferCount = Size; 
+    
+    huart->ErrorCode = HAL_UART_ERROR_NONE;
+    /* Check if a receive process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_RX) 
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX;
+    }
+    
+    /* Set the UART DMA transfer complete callback */
+    huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt;
+    
+    /* Set the UART DMA Half transfer complete callback */
+    huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt;
+    
+    /* Set the DMA error callback */
+    huart->hdmatx->XferErrorCallback = UART_DMAError;
+
+    /* Enable the UART transmit DMA channel */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->TDR, Size);
+
+    /* Clear the TC flag in the SR register by writing 0 to it */
+    __HAL_UART_CLEAR_IT(huart, UART_FLAG_TC);
+
+    
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the UART CR3 register */
+    huart->Instance->CR3 |= USART_CR3_DMAT;
+    
+    /* Process Unlocked */
+    __HAL_UNLOCK(huart);
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;   
+  }
+}
+
+/**
+  * @brief Receive an amount of data in DMA mode 
+  * @param huart: uart handle
+  * @param pData: pointer to data buffer
+  * @param Size: amount of data to be received
+  * @note   When the UART parity is enabled (PCE = 1), the received data contain 
+  *         the parity bit (MSB position)     
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
+{
+  uint32_t *tmp;
+  
+  if((huart->State == HAL_UART_STATE_READY) || (huart->State == HAL_UART_STATE_BUSY_TX))
+  {
+    if((pData == NULL ) || (Size == 0)) 
+    {
+      return HAL_ERROR;
+    }
+    
+    /* Process Locked */
+    __HAL_LOCK(huart);
+    
+    huart->pRxBuffPtr = pData;
+    huart->RxXferSize = Size;
+    
+    huart->ErrorCode = HAL_UART_ERROR_NONE;
+    /* Check if a transmit process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX) 
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_BUSY_RX;
+    }
+    
+    /* Set the UART DMA transfer complete callback */
+    huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
+    
+    /* Set the UART DMA Half transfer complete callback */
+    huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
+    
+    /* Set the DMA error callback */
+    huart->hdmarx->XferErrorCallback = UART_DMAError;
+
+    /* Enable the DMA channel */
+    tmp = (uint32_t*)&pData;
+    HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->RDR, *(uint32_t*)tmp, Size);
+
+    /* Enable the DMA transfer for the receiver request by setting the DMAR bit 
+       in the UART CR3 register */
+     huart->Instance->CR3 |= USART_CR3_DMAR;
+    
+     /* Process Unlocked */
+     __HAL_UNLOCK(huart);
+     
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @brief Pauses the DMA Transfer.
+  * @param huart: UART handle
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart)
+{
+  /* Process Locked */
+  __HAL_LOCK(huart);
+  
+  if(huart->State == HAL_UART_STATE_BUSY_TX)
+  {
+    /* Disable the UART DMA Tx request */
+    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+  }
+  else if(huart->State == HAL_UART_STATE_BUSY_RX)
+  {
+    /* Disable the UART DMA Rx request */
+    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+  }
+  else if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+  {
+    /* Disable the UART DMA Tx request */
+    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+    /* Disable the UART DMA Rx request */
+    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+  }
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(huart);
+
+  return HAL_OK; 
+}
+
+/**
+  * @brief Resumes the DMA Transfer.
+  * @param huart: UART handle
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart)
+{
+  /* Process Locked */
+  __HAL_LOCK(huart);
+
+  if(huart->State == HAL_UART_STATE_BUSY_TX)
+  {
+    /* Enable the UART DMA Tx request */
+    huart->Instance->CR3 |= USART_CR3_DMAT;
+  }
+  else if(huart->State == HAL_UART_STATE_BUSY_RX)
+  {
+		/* Clear the Overrun flag before resuming the Rx transfer*/
+    __HAL_UART_CLEAR_IT(huart, UART_CLEAR_OREF);
+
+    /* Enable the UART DMA Rx request */
+    huart->Instance->CR3 |= USART_CR3_DMAR;
+  }
+  else if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+  {
+		/* Clear the Overrun flag before resuming the Rx transfer*/
+    __HAL_UART_CLEAR_IT(huart, UART_CLEAR_OREF);
+		
+    /* Enable the UART DMA Rx request  before the DMA Tx request */
+    huart->Instance->CR3 |= USART_CR3_DMAR;
+
+    /* Enable the UART DMA Tx request */
+    huart->Instance->CR3 |= USART_CR3_DMAT;
+  }
+
+  /* If the UART peripheral is still not enabled, enable it */
+  if ((huart->Instance->CR1 & USART_CR1_UE) == 0)
+  {
+    /* Enable UART peripheral */
+    __HAL_UART_ENABLE(huart);
+  }
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Stops the DMA Transfer.
+  * @param huart: UART handle
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart)
+{
+  /* The Lock is not implemented on this API to allow the user application
+     to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback() /
+     HAL_UART_TxHalfCpltCallback / HAL_UART_RxHalfCpltCallback: 
+     indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete  
+     interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of 
+     the stream and the corresponding call back is executed. */
+  
+  /* Disable the UART Tx/Rx DMA requests */
+  huart->Instance->CR3 &= ~USART_CR3_DMAT;
+  huart->Instance->CR3 &= ~USART_CR3_DMAR;
+  
+  /* Abort the UART DMA tx channel */
+  if(huart->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(huart->hdmatx);
+  }
+  /* Abort the UART DMA rx channel */
+  if(huart->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(huart->hdmarx);
+  }
+  
+  huart->State = HAL_UART_STATE_READY;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief This function handles UART interrupt request.
+  * @param huart: uart handle
+  * @retval None
+  */
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart)
+{
+  /* UART parity error interrupt occurred -------------------------------------*/
+  if((__HAL_UART_GET_IT(huart, UART_IT_PE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_PE) != RESET))
+  { 
+		__HAL_UART_CLEAR_PEFLAG(huart);
+
+    huart->ErrorCode |= HAL_UART_ERROR_PE;
+    /* Set the UART state ready to be able to start again the process */
+    huart->State = HAL_UART_STATE_READY;
+  }
+  
+  /* UART frame error interrupt occurred --------------------------------------*/
+  if((__HAL_UART_GET_IT(huart, UART_IT_FE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR) != RESET))
+  { 
+    __HAL_UART_CLEAR_FEFLAG(huart);
+
+    huart->ErrorCode |= HAL_UART_ERROR_FE;
+    /* Set the UART state ready to be able to start again the process */
+    huart->State = HAL_UART_STATE_READY;
+  }
+  
+  /* UART noise error interrupt occurred --------------------------------------*/
+  if((__HAL_UART_GET_IT(huart, UART_IT_NE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR) != RESET))
+  { 
+    __HAL_UART_CLEAR_NEFLAG(huart);
+
+    huart->ErrorCode |= HAL_UART_ERROR_NE;
+    /* Set the UART state ready to be able to start again the process */
+    huart->State = HAL_UART_STATE_READY;
+  }
+  
+  /* UART Over-Run interrupt occurred -----------------------------------------*/
+  if((__HAL_UART_GET_IT(huart, UART_IT_ORE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR) != RESET))
+  { 
+    __HAL_UART_CLEAR_OREFLAG(huart);
+
+    huart->ErrorCode |= HAL_UART_ERROR_ORE;
+    /* Set the UART state ready to be able to start again the process */
+    huart->State = HAL_UART_STATE_READY;
+  }
+
+   /* Call UART Error Call back function if need be --------------------------*/
+  if(huart->ErrorCode != HAL_UART_ERROR_NONE)
+  {
+    HAL_UART_ErrorCallback(huart);
+  }
+
+  /* UART in mode Receiver ---------------------------------------------------*/
+  if((__HAL_UART_GET_IT(huart, UART_IT_RXNE) != RESET) && (__HAL_UART_GET_IT_SOURCE(huart, UART_IT_RXNE) != RESET))
+  { 
+    UART_Receive_IT(huart);
+    /* Clear RXNE interrupt flag */
+    __HAL_UART_SEND_REQ(huart, UART_RXDATA_FLUSH_REQUEST);
+  }
+  
+
+  /* UART in mode Transmitter ------------------------------------------------*/
+ if((__HAL_UART_GET_IT(huart, UART_IT_TXE) != RESET) &&(__HAL_UART_GET_IT_SOURCE(huart, UART_IT_TXE) != RESET))
+  {
+    UART_Transmit_IT(huart);
+  }
+
+  /* UART in mode Transmitter (transmission end) -----------------------------*/
+ if((__HAL_UART_GET_IT(huart, UART_IT_TC) != RESET) &&(__HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC) != RESET))
+  {
+    UART_EndTransmit_IT(huart);
+  }
+  
+}
+
+
+/**
+  * @brief  This function handles UART Communication Timeout.
+  * @param  huart: UART handle
+  * @param  Flag: specifies the UART flag to check.
+  * @param  Status: The new Flag status (SET or RESET).
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
+{
+  uint32_t tickstart = HAL_GetTick();
+  
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {    
+    while(__HAL_UART_GET_FLAG(huart, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick()-tickstart) >=  Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
+          __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+          __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
+          __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+          
+          huart->State= HAL_UART_STATE_READY;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(huart);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_UART_GET_FLAG(huart, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick()-tickstart) >=  Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
+          __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+          __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
+          __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+          
+          huart->State= HAL_UART_STATE_READY;
+          
+          /* Process Unlocked */
+          __HAL_UNLOCK(huart);
+          
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;      
+}
+
+
+
+/**
+  * @brief DMA UART transmit process complete callback 
+  * @param hdma: DMA handle
+  * @retval None
+  */
+static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma)     
+{
+  UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* DMA Normal mode*/
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    huart->TxXferCount = 0;
+
+    /* Disable the DMA transfer for transmit request by setting the DMAT bit
+       in the UART CR3 register */
+    huart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);
+
+    /* Enable the UART Transmit Complete Interrupt */
+    __HAL_UART_ENABLE_IT(huart, UART_IT_TC);
+  }
+  /* DMA Circular mode */
+  else
+  {
+    HAL_UART_TxCpltCallback(huart);
+  }
+}
+
+/**
+  * @brief DMA UART transmit process half complete callback 
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_UART_TxHalfCpltCallback(huart);
+}
+
+/**
+  * @brief DMA UART receive process complete callback 
+  * @param hdma: DMA handle
+  * @retval None
+  */
+static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)  
+{
+  UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  
+  /* DMA Normal mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  { 
+    huart->RxXferCount = 0;
+    
+    /* Disable the DMA transfer for the receiver request by setting the DMAR bit 
+    in the UART CR3 register */
+    huart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAR);
+    
+    /* Check if a transmit Process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX_RX) 
+    {
+      huart->State = HAL_UART_STATE_BUSY_TX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_READY;
+    }
+  }
+  HAL_UART_RxCpltCallback(huart);
+}
+
+/**
+  * @brief DMA UART receive process half complete callback 
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_UART_RxHalfCpltCallback(huart); 
+}
+
+/**
+  * @brief DMA UART communication error callback 
+  * @param hdma: DMA handle
+  * @retval None
+  */
+static void UART_DMAError(DMA_HandleTypeDef *hdma)   
+{
+  UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+  huart->RxXferCount = 0;
+  huart->TxXferCount = 0;
+  huart->State= HAL_UART_STATE_READY;
+  huart->ErrorCode |= HAL_UART_ERROR_DMA;
+  HAL_UART_ErrorCallback(huart);
+}
+
+/**
+  * @brief Tx Transfer completed callbacks
+  * @param huart: uart handle
+  * @retval None
+  */
+ __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(huart);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_UART_TxCpltCallback can be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Tx Half Transfer completed callbacks.
+  * @param  huart: UART handle
+  * @retval None
+  */
+ __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(huart);
+ 
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_UART_TxHalfCpltCallback can be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief Rx Transfer completed callbacks
+  * @param huart: uart handle
+  * @retval None
+  */
+__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(huart);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_UART_RxCpltCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Half Transfer completed callbacks.
+  * @param  huart: UART handle
+  * @retval None
+  */
+__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(huart);
+ 
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_UART_RxHalfCpltCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @brief UART error callbacks
+  * @param huart: uart handle
+  * @retval None
+  */
+ __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(huart);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_UART_ErrorCallback can be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief Send an amount of data in interrupt mode 
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_UART_Transmit_IT()
+  * @param  huart: UART handle
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart)
+{
+  uint16_t* tmp;
+
+  if ((huart->State == HAL_UART_STATE_BUSY_TX) || (huart->State == HAL_UART_STATE_BUSY_TX_RX))
+  {
+
+    if(huart->TxXferCount == 0)
+    {
+      /* Disable the UART Transmit Data Register Empty Interrupt */
+      __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
+
+      /* Check if a receive Process is ongoing or not */
+      if(huart->State == HAL_UART_STATE_BUSY_TX_RX) 
+      {
+        huart->State = HAL_UART_STATE_BUSY_RX;
+      }
+      else
+      {      
+        huart->State = HAL_UART_STATE_READY;
+      }
+      
+      /* Wait on TC flag to be able to start a second transfer */
+      if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, HAL_UART_TIMEOUT_VALUE) != HAL_OK)
+      { 
+        return HAL_TIMEOUT;
+      }
+
+      HAL_UART_TxCpltCallback(huart);
+
+      return HAL_OK;
+    }
+    else
+    {
+      if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+      {
+        tmp = (uint16_t*) huart->pTxBuffPtr;
+        huart->Instance->TDR = (*tmp & (uint16_t)0x01FF);
+        huart->pTxBuffPtr += 2;
+      } 
+      else
+      {
+        huart->Instance->TDR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0xFF);
+      }
+
+      huart->TxXferCount--;
+      
+      return HAL_OK;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;   
+  }
+}
+
+/**
+  * @brief  Wrap up transmission in non-blocking mode.
+  * @param  huart: pointer to a UART_HandleTypeDef structure that contains
+  *                the configuration information for the specified UART module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart)
+{
+  /* Disable the UART Transmit Complete Interrupt */
+  __HAL_UART_DISABLE_IT(huart, UART_IT_TC);
+
+  /* Check if a receive process is ongoing or not */
+  if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+  {
+    huart->State = HAL_UART_STATE_BUSY_RX;
+  }
+  else
+  {
+    huart->State = HAL_UART_STATE_READY;
+  }
+
+  HAL_UART_TxCpltCallback(huart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Receive an amount of data in interrupt mode 
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_UART_Receive_IT()
+  * @param  huart: UART handle
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart)
+{
+  uint16_t* tmp;
+  uint16_t uhMask = huart->Mask;
+
+  if((huart->State == HAL_UART_STATE_BUSY_RX) || (huart->State == HAL_UART_STATE_BUSY_TX_RX))
+  {
+    
+    if ((huart->Init.WordLength == UART_WORDLENGTH_9B) && (huart->Init.Parity == UART_PARITY_NONE))
+    {
+      tmp = (uint16_t*) huart->pRxBuffPtr ;
+      *tmp = (uint16_t)(huart->Instance->RDR & uhMask);
+      huart->pRxBuffPtr +=2;
+    }
+    else
+    {
+      *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->RDR & (uint8_t)uhMask); 
+    }
+
+    if(--huart->RxXferCount == 0)
+    {
+      __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
+
+      /* Check if a transmit Process is ongoing or not */
+      if(huart->State == HAL_UART_STATE_BUSY_TX_RX) 
+      {
+        huart->State = HAL_UART_STATE_BUSY_TX;
+      }
+      else
+      {
+        /* Disable the UART Parity Error Interrupt */
+        __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
+
+        /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
+        __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
+
+        huart->State = HAL_UART_STATE_READY;
+      }
+      
+      HAL_UART_RxCpltCallback(huart);
+      
+      return HAL_OK;
+    }
+    
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY; 
+  }
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions 
+  *  @brief   UART control functions 
+  *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the UART.
+     (+) HAL_UART_GetState() API is helpful to check in run-time the state of the UART peripheral. 
+     (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode
+     (+) HAL_MultiProcessor_DisableMuteMode() API disables mute mode
+     (+) HAL_MultiProcessor_EnterMuteMode() API enters mute mode
+     (+) HAL_MultiProcessor_EnableMuteMode() API enables mute mode
+     (+) UART_SetConfig() API configures the UART peripheral
+     (+) UART_AdvFeatureConfig() API optionally configures the UART advanced features        
+     (+) UART_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization 
+     (+) HAL_HalfDuplex_EnableTransmitter() API disables receiver and enables transmitter  
+     (+) HAL_HalfDuplex_EnableReceiver() API disables transmitter and enables receiver  
+     (+) HAL_LIN_SendBreak() API transmits the break characters           
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief Enable UART in mute mode (doesn't mean UART enters mute mode;
+  * to enter mute mode, HAL_MultiProcessor_EnterMuteMode() API must be called)
+  * @param huart: UART handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart)
+{  
+  /* Process Locked */
+  __HAL_LOCK(huart);
+  
+  huart->State = HAL_UART_STATE_BUSY;
+  
+  /* Enable USART mute mode by setting the MME bit in the CR1 register */
+  huart->Instance->CR1 |= USART_CR1_MME;
+  
+  huart->State = HAL_UART_STATE_READY;
+  
+  return (UART_CheckIdleState(huart));
+}
+
+/**
+  * @brief Disable UART mute mode (doesn't mean it actually wakes up the software,
+  * as it may not have been in mute mode at this very moment).
+  * @param huart: uart handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart)
+{ 
+  /* Process Locked */
+  __HAL_LOCK(huart);
+  
+  huart->State = HAL_UART_STATE_BUSY;
+  
+   /* Disable USART mute mode by clearing the MME bit in the CR1 register */
+  huart->Instance->CR1 &= ~(USART_CR1_MME);
+  
+  huart->State = HAL_UART_STATE_READY;
+  
+  return (UART_CheckIdleState(huart));
+}
+
+/**
+  * @brief Enter UART mute mode (means UART actually enters mute mode).
+  * To exit from mute mode, HAL_MultiProcessor_DisableMuteMode() API must be called. 
+  * @param huart: uart handle
+  * @retval HAL status
+  */
+void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart)
+{    
+  __HAL_UART_SEND_REQ(huart, UART_MUTE_MODE_REQUEST);
+}
+
+
+
+/**
+  * @brief return the UART state
+  * @param huart: uart handle
+  * @retval HAL state
+  */
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart)
+{
+  return huart->State;
+}
+
+/**
+* @brief  Return the UART error code
+* @param  huart : pointer to a UART_HandleTypeDef structure that contains
+  *              the configuration information for the specified UART.
+* @retval UART Error Code
+*/
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart)
+{
+  return huart->ErrorCode;
+}
+
+/**
+  * @brief Configure the UART peripheral 
+  * @param huart: uart handle
+  * @retval None
+  */
+HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart)
+{
+  uint32_t tmpreg                     = 0x00000000;
+  UART_ClockSourceTypeDef clocksource = UART_CLOCKSOURCE_UNDEFINED;
+  uint16_t brrtemp                    = 0x0000;
+  uint16_t usartdiv                   = 0x0000;
+  HAL_StatusTypeDef ret               = HAL_OK;  
+  
+  /* Check the parameters */ 
+  assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate));  
+  assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
+  assert_param(IS_UART_STOPBITS(huart->Init.StopBits));
+  assert_param(IS_UART_PARITY(huart->Init.Parity));
+  assert_param(IS_UART_MODE(huart->Init.Mode));
+  assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl));
+  assert_param(IS_UART_ONE_BIT_SAMPLE(huart->Init.OneBitSampling)); 
+
+
+  /*-------------------------- USART CR1 Configuration -----------------------*/
+  /* Clear M, PCE, PS, TE, RE and OVER8 bits and configure       
+   *  the UART Word Length, Parity, Mode and oversampling: 
+   *  set the M bits according to huart->Init.WordLength value 
+   *  set PCE and PS bits according to huart->Init.Parity value
+   *  set TE and RE bits according to huart->Init.Mode value
+   *  set OVER8 bit according to huart->Init.OverSampling value */
+  tmpreg = (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling ;
+  MODIFY_REG(huart->Instance->CR1, UART_CR1_FIELDS, tmpreg);
+
+  /*-------------------------- USART CR2 Configuration -----------------------*/
+  /* Configure the UART Stop Bits: Set STOP[13:12] bits according 
+   * to huart->Init.StopBits value */
+  MODIFY_REG(huart->Instance->CR2, USART_CR2_STOP, huart->Init.StopBits);
+  
+  /*-------------------------- USART CR3 Configuration -----------------------*/
+  /* Configure 
+   * - UART HardWare Flow Control: set CTSE and RTSE bits according 
+   *   to huart->Init.HwFlowCtl value 
+   * - one-bit sampling method versus three samples' majority rule according
+   *   to huart->Init.OneBitSampling */
+  tmpreg = (uint32_t)huart->Init.HwFlowCtl | huart->Init.OneBitSampling ;
+  MODIFY_REG(huart->Instance->CR3, (USART_CR3_RTSE | USART_CR3_CTSE | USART_CR3_ONEBIT), tmpreg);
+  
+  /*-------------------------- USART BRR Configuration -----------------------*/
+  UART_GETCLOCKSOURCE(huart, clocksource);
+
+  /* Check UART Over Sampling to set Baud Rate Register */
+  if (huart->Init.OverSampling == UART_OVERSAMPLING_8)
+  { 
+    switch (clocksource)
+    {
+    case UART_CLOCKSOURCE_PCLK1:
+        usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate));
+      break;
+    case UART_CLOCKSOURCE_PCLK2:
+        usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate));
+      break;
+    case UART_CLOCKSOURCE_HSI:
+        usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HSI_VALUE, huart->Init.BaudRate)); 
+      break;
+    case UART_CLOCKSOURCE_SYSCLK:
+        usartdiv = (uint16_t)(UART_DIV_SAMPLING8(HAL_RCC_GetSysClockFreq(), huart->Init.BaudRate));
+      break;
+    case UART_CLOCKSOURCE_LSE:
+        usartdiv = (uint16_t)(UART_DIV_SAMPLING8(LSE_VALUE, huart->Init.BaudRate)); 
+      break;
+      case UART_CLOCKSOURCE_UNDEFINED:                
+    default:
+        ret = HAL_ERROR; 
+      break;
+    }
+    
+    brrtemp = usartdiv & 0xFFF0;
+    brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000F) >> 1U);
+    huart->Instance->BRR = brrtemp;
+  }
+  else
+  {
+    switch (clocksource)
+    {
+    case UART_CLOCKSOURCE_PCLK1: 
+        huart->Instance->BRR = (uint16_t)(UART_DIV_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate));
+      break;
+    case UART_CLOCKSOURCE_PCLK2: 
+        huart->Instance->BRR = (uint16_t)(UART_DIV_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate));
+      break;
+    case UART_CLOCKSOURCE_HSI: 
+        huart->Instance->BRR = (uint16_t)(UART_DIV_SAMPLING16(HSI_VALUE, huart->Init.BaudRate)); 
+      break; 
+    case UART_CLOCKSOURCE_SYSCLK:  
+        huart->Instance->BRR = (uint16_t)(UART_DIV_SAMPLING16(HAL_RCC_GetSysClockFreq(), huart->Init.BaudRate));
+      break;  
+    case UART_CLOCKSOURCE_LSE:
+        huart->Instance->BRR = (uint16_t)(UART_DIV_SAMPLING16(LSE_VALUE, huart->Init.BaudRate)); 
+      break;
+      case UART_CLOCKSOURCE_UNDEFINED:                
+    default:
+        ret = HAL_ERROR; 
+      break;
+    }
+  }
+
+  return ret;   
+
+}
+
+
+/**
+  * @brief Configure the UART peripheral advanced features 
+  * @param huart: uart handle  
+  * @retval None
+  */
+void UART_AdvFeatureConfig(UART_HandleTypeDef *huart)
+{
+  /* Check whether the set of advanced features to configure is properly set */ 
+  assert_param(IS_UART_ADVFEATURE_INIT(huart->AdvancedInit.AdvFeatureInit));
+  
+  /* if required, configure TX pin active level inversion */
+  if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_TXINVERT_INIT))
+  {
+    assert_param(IS_UART_ADVFEATURE_TXINV(huart->AdvancedInit.TxPinLevelInvert));
+    MODIFY_REG(huart->Instance->CR2, USART_CR2_TXINV, huart->AdvancedInit.TxPinLevelInvert);
+  }
+  
+  /* if required, configure RX pin active level inversion */
+  if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXINVERT_INIT))
+  {
+    assert_param(IS_UART_ADVFEATURE_RXINV(huart->AdvancedInit.RxPinLevelInvert));
+    MODIFY_REG(huart->Instance->CR2, USART_CR2_RXINV, huart->AdvancedInit.RxPinLevelInvert);
+  }
+  
+  /* if required, configure data inversion */
+  if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DATAINVERT_INIT))
+  {
+    assert_param(IS_UART_ADVFEATURE_DATAINV(huart->AdvancedInit.DataInvert));
+    MODIFY_REG(huart->Instance->CR2, USART_CR2_DATAINV, huart->AdvancedInit.DataInvert);
+  }
+  
+  /* if required, configure RX/TX pins swap */
+  if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_SWAP_INIT))
+  {
+    assert_param(IS_UART_ADVFEATURE_SWAP(huart->AdvancedInit.Swap));
+    MODIFY_REG(huart->Instance->CR2, USART_CR2_SWAP, huart->AdvancedInit.Swap);
+  }
+  
+  /* if required, configure RX overrun detection disabling */
+  if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_RXOVERRUNDISABLE_INIT))
+  {
+    assert_param(IS_UART_OVERRUN(huart->AdvancedInit.OverrunDisable));  
+    MODIFY_REG(huart->Instance->CR3, USART_CR3_OVRDIS, huart->AdvancedInit.OverrunDisable);
+  }
+  
+  /* if required, configure DMA disabling on reception error */
+  if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_DMADISABLEONERROR_INIT))
+  {
+    assert_param(IS_UART_ADVFEATURE_DMAONRXERROR(huart->AdvancedInit.DMADisableonRxError));   
+    MODIFY_REG(huart->Instance->CR3, USART_CR3_DDRE, huart->AdvancedInit.DMADisableonRxError);
+  }
+  
+  /* if required, configure auto Baud rate detection scheme */              
+  if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_AUTOBAUDRATE_INIT))
+  {
+    assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATE(huart->AdvancedInit.AutoBaudRateEnable));
+    MODIFY_REG(huart->Instance->CR2, USART_CR2_ABREN, huart->AdvancedInit.AutoBaudRateEnable);
+    /* set auto Baudrate detection parameters if detection is enabled */
+    if(huart->AdvancedInit.AutoBaudRateEnable == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)
+    {
+      assert_param(IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(huart->AdvancedInit.AutoBaudRateMode));
+      MODIFY_REG(huart->Instance->CR2, USART_CR2_ABRMODE, huart->AdvancedInit.AutoBaudRateMode);
+    }
+  }
+  
+  /* if required, configure MSB first on communication line */  
+  if(HAL_IS_BIT_SET(huart->AdvancedInit.AdvFeatureInit, UART_ADVFEATURE_MSBFIRST_INIT))
+  {
+    assert_param(IS_UART_ADVFEATURE_MSBFIRST(huart->AdvancedInit.MSBFirst));   
+    MODIFY_REG(huart->Instance->CR2, USART_CR2_MSBFIRST, huart->AdvancedInit.MSBFirst);
+  }
+}
+
+
+
+/**
+  * @brief Check the UART Idle State
+  * @param huart: uart handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart)
+{
+  /* Initialize the UART ErrorCode */
+  huart->ErrorCode = HAL_UART_ERROR_NONE;
+  
+  /* Check if the Transmitter is enabled */
+  if((huart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
+  {
+    /* Wait until TEACK flag is set */
+    if(UART_WaitOnFlagUntilTimeout(huart, USART_ISR_TEACK, RESET, HAL_UART_TIMEOUT_VALUE) != HAL_OK)  
+    {
+      /* Timeout Occurred */
+      return HAL_TIMEOUT;
+    }
+  }
+  /* Check if the Receiver is enabled */
+  if((huart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
+  {
+    /* Wait until REACK flag is set */
+    if(UART_WaitOnFlagUntilTimeout(huart, USART_ISR_REACK, RESET,  HAL_UART_TIMEOUT_VALUE) != HAL_OK)  
+    { 
+      /* Timeout Occurred */
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  /* Initialize the UART State */
+  huart->State= HAL_UART_STATE_READY;
+    
+  /* Process Unlocked */
+  __HAL_UNLOCK(huart);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the UART transmitter and disables the UART receiver.
+  * @param  huart: UART handle
+  * @retval HAL status
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart)
+{
+  /* Process Locked */
+  __HAL_LOCK(huart);
+  huart->State = HAL_UART_STATE_BUSY;
+  
+  /* Clear TE and RE bits */
+  CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
+  /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */
+  SET_BIT(huart->Instance->CR1, USART_CR1_TE);
+ 
+  huart->State= HAL_UART_STATE_READY;
+  /* Process Unlocked */
+  __HAL_UNLOCK(huart);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Enables the UART receiver and disables the UART transmitter.
+  * @param  huart: UART handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart)
+{
+  /* Process Locked */
+  __HAL_LOCK(huart);
+  huart->State = HAL_UART_STATE_BUSY;
+
+  /* Clear TE and RE bits */
+  CLEAR_BIT(huart->Instance->CR1, (USART_CR1_TE | USART_CR1_RE));
+  /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */
+  SET_BIT(huart->Instance->CR1, USART_CR1_RE);
+
+  huart->State = HAL_UART_STATE_READY;
+  /* Process Unlocked */
+  __HAL_UNLOCK(huart);
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Transmits break characters.
+  * @param  huart: UART handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart)
+{
+  /* Check the parameters */
+  assert_param(IS_UART_INSTANCE(huart->Instance));
+  
+  /* Process Locked */
+  __HAL_LOCK(huart);
+  
+  huart->State = HAL_UART_STATE_BUSY;
+  
+  /* Send break characters */
+  huart->Instance->RQR |= UART_SENDBREAK_REQUEST;  
+ 
+  huart->State = HAL_UART_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(huart);
+  
+  return HAL_OK; 
+}
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_UART_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_uart.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1165 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_uart.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of UART HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_UART_H
+#define __STM32F7xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup UART
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Types UART Exported Types
+  * @{
+  */
+
+/**
+  * @brief UART Init Structure definition
+  */
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< This member configures the UART communication baud rate.
+                                           The baud rate register is computed using the following formula:
+                                           - If oversampling is 16 or in LIN mode,
+                                              Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
+                                           - If oversampling is 8,
+                                              Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
+                                              Baud Rate Register[3] =  0
+                                              Baud Rate Register[2:0] =  (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1      */
+
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter can be a value of @ref UARTEx_Word_Length */
+
+  uint32_t StopBits;                  /*!< Specifies the number of stop bits transmitted.
+                                           This parameter can be a value of @ref UART_Stop_Bits */
+
+  uint32_t Parity;                    /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref UART_Parity
+                                           @note When parity is enabled, the computed parity is inserted
+                                                 at the MSB position of the transmitted data (9th bit when
+                                                 the word length is set to 9 data bits; 8th bit when the
+                                                 word length is set to 8 data bits). */
+
+  uint32_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref UART_Mode */
+
+  uint32_t HwFlowCtl;                 /*!< Specifies whether the hardware flow control mode is enabled
+                                           or disabled.
+                                           This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+  uint32_t OverSampling;              /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+                                           This parameter can be a value of @ref UART_Over_Sampling */
+
+  uint32_t OneBitSampling;            /*!< Specifies whether a single sample or three samples' majority vote is selected.
+                                           Selecting the single sample method increases the receiver tolerance to clock
+                                           deviations. This parameter can be a value of @ref UART_OneBit_Sampling */
+}UART_InitTypeDef;
+
+/**
+  * @brief  UART Advanced Features initialization structure definition
+  */
+typedef struct
+{
+  uint32_t AdvFeatureInit;        /*!< Specifies which advanced UART features is initialized. Several
+                                       Advanced Features may be initialized at the same time .
+                                       This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */
+
+  uint32_t TxPinLevelInvert;      /*!< Specifies whether the TX pin active level is inverted.
+                                       This parameter can be a value of @ref UART_Tx_Inv  */
+
+  uint32_t RxPinLevelInvert;      /*!< Specifies whether the RX pin active level is inverted.
+                                       This parameter can be a value of @ref UART_Rx_Inv  */
+
+  uint32_t DataInvert;            /*!< Specifies whether data are inverted (positive/direct logic
+                                       vs negative/inverted logic).
+                                       This parameter can be a value of @ref UART_Data_Inv */
+
+  uint32_t Swap;                  /*!< Specifies whether TX and RX pins are swapped.
+                                       This parameter can be a value of @ref UART_Rx_Tx_Swap */
+
+  uint32_t OverrunDisable;        /*!< Specifies whether the reception overrun detection is disabled.
+                                       This parameter can be a value of @ref UART_Overrun_Disable */
+
+  uint32_t DMADisableonRxError;   /*!< Specifies whether the DMA is disabled in case of reception error.
+                                       This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */
+
+  uint32_t AutoBaudRateEnable;    /*!< Specifies whether auto Baud rate detection is enabled.
+                                       This parameter can be a value of @ref UART_AutoBaudRate_Enable */
+
+  uint32_t AutoBaudRateMode;      /*!< If auto Baud rate detection is enabled, specifies how the rate
+                                       detection is carried out.
+                                       This parameter can be a value of @ref UART_AutoBaud_Rate_Mode */
+
+  uint32_t MSBFirst;              /*!< Specifies whether MSB is sent first on UART line.
+                                       This parameter can be a value of @ref UART_MSB_First */
+} UART_AdvFeatureInitTypeDef;
+
+
+
+/**
+  * @brief HAL UART State structures definition
+  */
+typedef enum
+{
+  HAL_UART_STATE_RESET             = 0x00,    /*!< Peripheral is not initialized                      */
+  HAL_UART_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use           */
+  HAL_UART_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing                     */
+  HAL_UART_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing               */
+  HAL_UART_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing                  */
+  HAL_UART_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission and Reception process is ongoing */
+  HAL_UART_STATE_TIMEOUT           = 0x03,    /*!< Timeout state                                      */
+  HAL_UART_STATE_ERROR             = 0x04     /*!< Error                                              */
+}HAL_UART_StateTypeDef;
+
+/**
+  * @brief UART clock sources definition
+  */
+typedef enum
+{
+  UART_CLOCKSOURCE_PCLK1      = 0x00,    /*!< PCLK1 clock source  */
+  UART_CLOCKSOURCE_PCLK2      = 0x01,    /*!< PCLK2 clock source  */
+  UART_CLOCKSOURCE_HSI        = 0x02,    /*!< HSI clock source    */
+  UART_CLOCKSOURCE_SYSCLK     = 0x04,    /*!< SYSCLK clock source */
+  UART_CLOCKSOURCE_LSE        = 0x08,    /*!< LSE clock source       */
+  UART_CLOCKSOURCE_UNDEFINED  = 0x10     /*!< Undefined clock source */
+}UART_ClockSourceTypeDef;
+
+/**
+  * @brief  UART handle Structure definition
+  */
+typedef struct
+{
+  USART_TypeDef            *Instance;        /*!< UART registers base address        */
+
+  UART_InitTypeDef         Init;             /*!< UART communication parameters      */
+
+  UART_AdvFeatureInitTypeDef AdvancedInit;   /*!< UART Advanced Features initialization parameters */
+
+  uint8_t                  *pTxBuffPtr;      /*!< Pointer to UART Tx transfer Buffer */
+
+  uint16_t                 TxXferSize;       /*!< UART Tx Transfer size              */
+
+  uint16_t                 TxXferCount;      /*!< UART Tx Transfer Counter           */
+
+  uint8_t                  *pRxBuffPtr;      /*!< Pointer to UART Rx transfer Buffer */
+
+  uint16_t                 RxXferSize;       /*!< UART Rx Transfer size              */
+
+  uint16_t                 RxXferCount;      /*!< UART Rx Transfer Counter           */
+
+  uint16_t                 Mask;             /*!< UART Rx RDR register mask          */
+
+  DMA_HandleTypeDef        *hdmatx;          /*!< UART Tx DMA Handle parameters      */
+
+  DMA_HandleTypeDef        *hdmarx;          /*!< UART Rx DMA Handle parameters      */
+
+  HAL_LockTypeDef           Lock;            /*!< Locking object                     */
+
+  __IO HAL_UART_StateTypeDef    State;       /*!< UART communication state           */
+
+  __IO uint32_t             ErrorCode;   /*!< UART Error code                    */
+
+}UART_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants UART Exported Constants
+  * @{
+  */
+/** @defgroup UART_Error_Definition   UART Error Definition
+  * @{
+  */
+#define  HAL_UART_ERROR_NONE       ((uint32_t)0x00000000)    /*!< No error            */
+#define  HAL_UART_ERROR_PE         ((uint32_t)0x00000001)    /*!< Parity error        */
+#define  HAL_UART_ERROR_NE         ((uint32_t)0x00000002)    /*!< Noise error         */
+#define  HAL_UART_ERROR_FE         ((uint32_t)0x00000004)    /*!< frame error         */
+#define  HAL_UART_ERROR_ORE        ((uint32_t)0x00000008)    /*!< Overrun error       */
+#define  HAL_UART_ERROR_DMA        ((uint32_t)0x00000010)    /*!< DMA transfer error  */
+/**
+  * @}
+  */
+/** @defgroup UART_Stop_Bits   UART Number of Stop Bits
+  * @{
+  */
+#define UART_STOPBITS_1                     ((uint32_t)0x0000)
+#define UART_STOPBITS_2                     ((uint32_t)USART_CR2_STOP_1)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Parity  UART Parity
+  * @{
+  */
+#define UART_PARITY_NONE                    ((uint32_t)0x00000000)
+#define UART_PARITY_EVEN                    ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD                     ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+  * @}
+  */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+  * @{
+  */
+#define UART_HWCONTROL_NONE                  ((uint32_t)0x00000000)
+#define UART_HWCONTROL_RTS                   ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS                   ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS               ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+/**
+  * @}
+  */
+
+/** @defgroup UART_Mode UART Transfer Mode
+  * @{
+  */
+#define UART_MODE_RX                        ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX                        ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX                     ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+  * @}
+  */
+
+ /** @defgroup UART_State  UART State
+  * @{
+  */
+#define UART_STATE_DISABLE                  ((uint32_t)0x00000000)
+#define UART_STATE_ENABLE                   ((uint32_t)USART_CR1_UE)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+  * @{
+  */
+#define UART_OVERSAMPLING_16                ((uint32_t)0x00000000)
+#define UART_OVERSAMPLING_8                 ((uint32_t)USART_CR1_OVER8)
+/**
+  * @}
+  */
+
+/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
+  * @{
+  */
+#define UART_ONE_BIT_SAMPLE_DISABLE         ((uint32_t)0x00000000)
+#define UART_ONE_BIT_SAMPLE_ENABLE          ((uint32_t)USART_CR3_ONEBIT)
+/**
+  * @}
+  */
+
+/** @defgroup UART_AutoBaud_Rate_Mode    UART Advanced Feature AutoBaud Rate Mode
+  * @{
+  */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT    ((uint32_t)0x0000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME   ((uint32_t)USART_CR2_ABRMODE_1)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME   ((uint32_t)USART_CR2_ABRMODE)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
+  * @{
+  */
+#define UART_RECEIVER_TIMEOUT_DISABLE       ((uint32_t)0x00000000)
+#define UART_RECEIVER_TIMEOUT_ENABLE        ((uint32_t)USART_CR2_RTOEN)
+/**
+  * @}
+  */
+
+/** @defgroup UART_LIN    UART Local Interconnection Network mode
+  * @{
+  */
+#define UART_LIN_DISABLE                    ((uint32_t)0x00000000)
+#define UART_LIN_ENABLE                     ((uint32_t)USART_CR2_LINEN)
+/**
+  * @}
+  */
+
+/** @defgroup UART_LIN_Break_Detection  UART LIN Break Detection
+  * @{
+  */
+#define UART_LINBREAKDETECTLENGTH_10B       ((uint32_t)0x00000000)
+#define UART_LINBREAKDETECTLENGTH_11B       ((uint32_t)USART_CR2_LBDL)
+/**
+  * @}
+  */
+
+/** @defgroup UART_DMA_Tx    UART DMA Tx
+  * @{
+  */
+#define UART_DMA_TX_DISABLE                 ((uint32_t)0x00000000)
+#define UART_DMA_TX_ENABLE                  ((uint32_t)USART_CR3_DMAT)
+/**
+  * @}
+  */
+
+/** @defgroup UART_DMA_Rx   UART DMA Rx
+  * @{
+  */
+#define UART_DMA_RX_DISABLE                 ((uint32_t)0x0000)
+#define UART_DMA_RX_ENABLE                  ((uint32_t)USART_CR3_DMAR)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Half_Duplex_Selection  UART Half Duplex Selection
+  * @{
+  */
+#define UART_HALF_DUPLEX_DISABLE            ((uint32_t)0x0000)
+#define UART_HALF_DUPLEX_ENABLE             ((uint32_t)USART_CR3_HDSEL)
+/**
+  * @}
+  */
+
+/** @defgroup UART_WakeUp_Methods   UART WakeUp Methods
+  * @{
+  */
+#define UART_WAKEUPMETHOD_IDLELINE          ((uint32_t)0x00000000)
+#define UART_WAKEUPMETHOD_ADDRESSMARK       ((uint32_t)USART_CR1_WAKE)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Request_Parameters UART Request Parameters
+  * @{
+  */
+#define UART_AUTOBAUD_REQUEST               ((uint32_t)USART_RQR_ABRRQ)        /*!< Auto-Baud Rate Request */
+#define UART_SENDBREAK_REQUEST              ((uint32_t)USART_RQR_SBKRQ)        /*!< Send Break Request */
+#define UART_MUTE_MODE_REQUEST              ((uint32_t)USART_RQR_MMRQ)         /*!< Mute Mode Request */
+#define UART_RXDATA_FLUSH_REQUEST           ((uint32_t)USART_RQR_RXFRQ)        /*!< Receive Data flush Request */
+#define UART_TXDATA_FLUSH_REQUEST           ((uint32_t)USART_RQR_TXFRQ)        /*!< Transmit data flush Request */
+/**
+  * @}
+  */
+
+/** @defgroup UART_Advanced_Features_Initialization_Type  UART Advanced Feature Initialization Type
+  * @{
+  */
+#define UART_ADVFEATURE_NO_INIT                 ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_TXINVERT_INIT           ((uint32_t)0x00000001)
+#define UART_ADVFEATURE_RXINVERT_INIT           ((uint32_t)0x00000002)
+#define UART_ADVFEATURE_DATAINVERT_INIT         ((uint32_t)0x00000004)
+#define UART_ADVFEATURE_SWAP_INIT               ((uint32_t)0x00000008)
+#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT   ((uint32_t)0x00000010)
+#define UART_ADVFEATURE_DMADISABLEONERROR_INIT  ((uint32_t)0x00000020)
+#define UART_ADVFEATURE_AUTOBAUDRATE_INIT       ((uint32_t)0x00000040)
+#define UART_ADVFEATURE_MSBFIRST_INIT           ((uint32_t)0x00000080)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
+  * @{
+  */
+#define UART_ADVFEATURE_TXINV_DISABLE       ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_TXINV_ENABLE        ((uint32_t)USART_CR2_TXINV)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
+  * @{
+  */
+#define UART_ADVFEATURE_RXINV_DISABLE       ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_RXINV_ENABLE        ((uint32_t)USART_CR2_RXINV)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Data_Inv  UART Advanced Feature Binary Data Inversion
+  * @{
+  */
+#define UART_ADVFEATURE_DATAINV_DISABLE     ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_DATAINV_ENABLE      ((uint32_t)USART_CR2_DATAINV)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
+  * @{
+  */
+#define UART_ADVFEATURE_SWAP_DISABLE        ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_SWAP_ENABLE         ((uint32_t)USART_CR2_SWAP)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Overrun_Disable  UART Advanced Feature Overrun Disable
+  * @{
+  */
+#define UART_ADVFEATURE_OVERRUN_ENABLE      ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_OVERRUN_DISABLE     ((uint32_t)USART_CR3_OVRDIS)
+/**
+  * @}
+  */
+
+/** @defgroup UART_AutoBaudRate_Enable  UART Advanced Feature Auto BaudRate Enable
+  * @{
+  */
+#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE   ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE    ((uint32_t)USART_CR2_ABREN)
+/**
+  * @}
+  */
+
+/** @defgroup UART_DMA_Disable_on_Rx_Error   UART Advanced Feature DMA Disable On Rx Error
+  * @{
+  */
+#define UART_ADVFEATURE_DMA_ENABLEONRXERROR    ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_DMA_DISABLEONRXERROR   ((uint32_t)USART_CR3_DDRE)
+/**
+  * @}
+  */
+
+/** @defgroup UART_MSB_First   UART Advanced Feature MSB First
+  * @{
+  */
+#define UART_ADVFEATURE_MSBFIRST_DISABLE    ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_MSBFIRST_ENABLE     ((uint32_t)USART_CR2_MSBFIRST)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Mute_Mode   UART Advanced Feature Mute Mode Enable
+  * @{
+  */
+#define UART_ADVFEATURE_MUTEMODE_DISABLE    ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_MUTEMODE_ENABLE     ((uint32_t)USART_CR1_MME)
+/**
+  * @}
+  */
+
+/** @defgroup UART_CR2_ADDRESS_LSB_POS    UART Address-matching LSB Position In CR2 Register
+  * @{
+  */
+#define UART_CR2_ADDRESS_LSB_POS            ((uint32_t) 24)
+/**
+  * @}
+  */
+
+/** @defgroup UART_DriverEnable_Polarity      UART DriverEnable Polarity
+  * @{
+  */
+#define UART_DE_POLARITY_HIGH               ((uint32_t)0x00000000)
+#define UART_DE_POLARITY_LOW                ((uint32_t)USART_CR3_DEP)
+/**
+  * @}
+  */
+
+/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS    UART Driver Enable Assertion Time LSB Position In CR1 Register
+  * @{
+  */
+#define UART_CR1_DEAT_ADDRESS_LSB_POS       ((uint32_t) 21)
+/**
+  * @}
+  */
+
+/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS    UART Driver Enable DeAssertion Time LSB Position In CR1 Register
+  * @{
+  */
+#define UART_CR1_DEDT_ADDRESS_LSB_POS       ((uint32_t) 16)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Interruption_Mask    UART Interruptions Flag Mask
+  * @{
+  */
+#define UART_IT_MASK                        ((uint32_t)0x001F)
+/**
+  * @}
+  */
+
+/** @defgroup UART_TimeOut_Value    UART polling-based communications time-out value
+  * @{
+  */
+#define HAL_UART_TIMEOUT_VALUE              0x1FFFFFF
+/**
+  * @}
+  */
+
+/** @defgroup UART_Flags     UART Status Flags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the ISR register
+  * @{
+  */
+#define UART_FLAG_TEACK                     ((uint32_t)0x00200000)
+#define UART_FLAG_SBKF                      ((uint32_t)0x00040000)
+#define UART_FLAG_CMF                       ((uint32_t)0x00020000)
+#define UART_FLAG_BUSY                      ((uint32_t)0x00010000)
+#define UART_FLAG_ABRF                      ((uint32_t)0x00008000)
+#define UART_FLAG_ABRE                      ((uint32_t)0x00004000)
+#define UART_FLAG_EOBF                      ((uint32_t)0x00001000)
+#define UART_FLAG_RTOF                      ((uint32_t)0x00000800)
+#define UART_FLAG_CTS                       ((uint32_t)0x00000400)
+#define UART_FLAG_CTSIF                     ((uint32_t)0x00000200)
+#define UART_FLAG_LBDF                      ((uint32_t)0x00000100)
+#define UART_FLAG_TXE                       ((uint32_t)0x00000080)
+#define UART_FLAG_TC                        ((uint32_t)0x00000040)
+#define UART_FLAG_RXNE                      ((uint32_t)0x00000020)
+#define UART_FLAG_IDLE                      ((uint32_t)0x00000010)
+#define UART_FLAG_ORE                       ((uint32_t)0x00000008)
+#define UART_FLAG_NE                        ((uint32_t)0x00000004)
+#define UART_FLAG_FE                        ((uint32_t)0x00000002)
+#define UART_FLAG_PE                        ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup UART_Interrupt_definition   UART Interrupts Definition
+  *        Elements values convention: 0000ZZZZ0XXYYYYYb
+  *           - YYYYY  : Interrupt source position in the XX register (5bits)
+  *           - XX  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR2 register
+  *                 - 11: CR3 register
+  *           - ZZZZ  : Flag position in the ISR register(4bits)
+  * @{
+  */
+#define UART_IT_PE                          ((uint32_t)0x0028)
+#define UART_IT_TXE                         ((uint32_t)0x0727)
+#define UART_IT_TC                          ((uint32_t)0x0626)
+#define UART_IT_RXNE                        ((uint32_t)0x0525)
+#define UART_IT_IDLE                        ((uint32_t)0x0424)
+#define UART_IT_LBD                         ((uint32_t)0x0846)
+#define UART_IT_CTS                         ((uint32_t)0x096A)
+#define UART_IT_CM                          ((uint32_t)0x112E)
+
+/**       Elements values convention: 000000000XXYYYYYb
+  *           - YYYYY  : Interrupt source position in the XX register (5bits)
+  *           - XX  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR2 register
+  *                 - 11: CR3 register
+  */
+#define UART_IT_ERR                         ((uint32_t)0x0060)
+
+/**       Elements values convention: 0000ZZZZ00000000b
+  *           - ZZZZ  : Flag position in the ISR register(4bits)
+  */
+#define UART_IT_ORE                         ((uint32_t)0x0300)
+#define UART_IT_NE                          ((uint32_t)0x0200)
+#define UART_IT_FE                          ((uint32_t)0x0100)
+/**
+  * @}
+  */
+
+/** @defgroup UART_IT_CLEAR_Flags  UART Interruption Clear Flags
+  * @{
+  */
+#define UART_CLEAR_PEF                       USART_ICR_PECF            /*!< Parity Error Clear Flag */
+#define UART_CLEAR_FEF                       USART_ICR_FECF            /*!< Framing Error Clear Flag */
+#define UART_CLEAR_NEF                       USART_ICR_NCF             /*!< Noise detected Clear Flag */
+#define UART_CLEAR_OREF                      USART_ICR_ORECF           /*!< OverRun Error Clear Flag */
+#define UART_CLEAR_IDLEF                     USART_ICR_IDLECF          /*!< IDLE line detected Clear Flag */
+#define UART_CLEAR_TCF                       USART_ICR_TCCF            /*!< Transmission Complete Clear Flag */
+#define UART_CLEAR_LBDF                      USART_ICR_LBDCF           /*!< LIN Break Detection Clear Flag */
+#define UART_CLEAR_CTSF                      USART_ICR_CTSCF           /*!< CTS Interrupt Clear Flag */
+#define UART_CLEAR_RTOF                      USART_ICR_RTOCF           /*!< Receiver Time Out Clear Flag */
+#define UART_CLEAR_EOBF                      USART_ICR_EOBCF           /*!< End Of Block Clear Flag */
+#define UART_CLEAR_CMF                       USART_ICR_CMCF            /*!< Character Match Clear Flag */
+/**
+  * @}
+  */
+
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros UART Exported Macros
+  * @{
+  */
+
+/** @brief Reset UART handle state
+  * @param  __HANDLE__: UART handle.
+  * @retval None
+  */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
+
+/** @brief  Flush the UART Data registers
+  * @param  __HANDLE__: specifies the UART Handle.
+  */
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__)  \
+  do{                \
+      SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \
+      SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \
+    }  while(0)
+
+/** @brief  Clears the specified UART ISR flag, in setting the proper ICR register flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @param  __FLAG__: specifies the interrupt clear register flag that needs to be set
+  *                       to clear the corresponding interrupt
+  *          This parameter can be one of the following values:
+  *            @arg UART_CLEAR_PEF: Parity Error Clear Flag
+  *            @arg UART_CLEAR_FEF: Framing Error Clear Flag
+  *            @arg UART_CLEAR_NEF: Noise detected Clear Flag
+  *            @arg UART_CLEAR_OREF: OverRun Error Clear Flag
+  *            @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
+  *            @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
+  *            @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag
+  *            @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
+  *            @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
+  *            @arg UART_CLEAR_EOBF: End Of Block Clear Flag
+  *            @arg UART_CLEAR_CMF: Character Match Clear Flag
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_IT(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__FLAG__))
+
+/** @brief  Clear the UART PE pending flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__)   __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_PEF)
+
+/** @brief  Clear the UART FE pending flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__)   __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_FEF)
+
+/** @brief  Clear the UART NE pending flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__)  __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_NEF)
+
+/** @brief  Clear the UART ORE pending flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__)   __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_OREF)
+
+/** @brief  Clear the UART IDLE pending flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__)   __HAL_UART_CLEAR_IT((__HANDLE__),UART_CLEAR_IDLEF)
+
+/** @brief  Checks whether the specified UART flag is set or not.
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg UART_FLAG_REACK: Receive enable acknowledge flag
+  *            @arg UART_FLAG_TEACK: Transmit enable acknowledge flag
+  *            @arg UART_FLAG_WUF:   Wake up from stop mode flag
+  *            @arg UART_FLAG_RWU:   Receiver wake up flag (is the UART in mute mode)
+  *            @arg UART_FLAG_SBKF:  Send Break flag
+  *            @arg UART_FLAG_CMF:   Character match flag
+  *            @arg UART_FLAG_BUSY:  Busy flag
+  *            @arg UART_FLAG_ABRF:  Auto Baud rate detection flag
+  *            @arg UART_FLAG_ABRE:  Auto Baud rate detection error flag
+  *            @arg UART_FLAG_EOBF:  End of block flag
+  *            @arg UART_FLAG_RTOF:  Receiver timeout flag
+  *            @arg UART_FLAG_CTS:   CTS Change flag (not available for UART4 and UART5)
+  *            @arg UART_FLAG_LBD:   LIN Break detection flag
+  *            @arg UART_FLAG_TXE:   Transmit data register empty flag
+  *            @arg UART_FLAG_TC:    Transmission Complete flag
+  *            @arg UART_FLAG_RXNE:  Receive data register not empty flag
+  *            @arg UART_FLAG_IDLE:  Idle Line detection flag
+  *            @arg UART_FLAG_ORE:   OverRun Error flag
+  *            @arg UART_FLAG_NE:    Noise Error flag
+  *            @arg UART_FLAG_FE:    Framing Error flag
+  *            @arg UART_FLAG_PE:    Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief  Enables the specified UART interrupt.
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @param  __INTERRUPT__: specifies the UART interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg UART_IT_WUF:  Wakeup from stop mode interrupt
+  *            @arg UART_IT_CM:   Character match interrupt
+  *            @arg UART_IT_CTS:  CTS change interrupt
+  *            @arg UART_IT_LBD:  LIN Break detection interrupt
+  *            @arg UART_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg UART_IT_TC:   Transmission complete interrupt
+  *            @arg UART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg UART_IT_IDLE: Idle line detection interrupt
+  *            @arg UART_IT_PE:   Parity Error interrupt
+  *            @arg UART_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__)   (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+                                                           ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+                                                           ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+
+/** @brief  Disables the specified UART interrupt.
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @param  __INTERRUPT__: specifies the UART interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg UART_IT_CM:   Character match interrupt
+  *            @arg UART_IT_CTS:  CTS change interrupt
+  *            @arg UART_IT_LBD:  LIN Break detection interrupt
+  *            @arg UART_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg UART_IT_TC:   Transmission complete interrupt
+  *            @arg UART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg UART_IT_IDLE: Idle line detection interrupt
+  *            @arg UART_IT_PE:   Parity Error interrupt
+  *            @arg UART_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__)  (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+                                                           ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+                                                           ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+/** @brief  Checks whether the specified UART interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @param  __IT__: specifies the UART interrupt to check.
+  *          This parameter can be one of the following values:
+  *            @arg UART_IT_CM:   Character match interrupt
+  *            @arg UART_IT_CTS:  CTS change interrupt (not available for UART4 and UART5)
+  *            @arg UART_IT_LBD:  LIN Break detection interrupt
+  *            @arg UART_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg UART_IT_TC:   Transmission complete interrupt
+  *            @arg UART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg UART_IT_IDLE: Idle line detection interrupt
+  *            @arg UART_IT_ORE:  OverRun Error interrupt
+  *            @arg UART_IT_NE:   Noise Error interrupt
+  *            @arg UART_IT_FE:   Framing Error interrupt
+  *            @arg UART_IT_PE:   Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief  Checks whether the specified UART interrupt source is enabled.
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @param  __IT__: specifies the UART interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+  *            @arg UART_IT_LBD: LIN Break detection interrupt
+  *            @arg UART_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg UART_IT_TC:  Transmission complete interrupt
+  *            @arg UART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg UART_IT_IDLE: Idle line detection interrupt
+  *            @arg UART_IT_ORE: OverRun Error interrupt
+  *            @arg UART_IT_NE: Noise Error interrupt
+  *            @arg UART_IT_FE: Framing Error interrupt
+  *            @arg UART_IT_PE: Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
+                                                       (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
+
+/** @brief  Set a specific UART request flag.
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @param  __REQ__: specifies the request flag to set
+  *          This parameter can be one of the following values:
+  *            @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
+  *            @arg UART_SENDBREAK_REQUEST: Send Break Request
+  *            @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
+  *            @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+  *            @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+  * @retval None
+  */
+#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint32_t)(__REQ__))
+
+/** @brief  Enables the UART one bit sample method
+  * @param  __HANDLE__: specifies the UART Handle.  
+  * @retval None
+  */     
+#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief  Disables the UART one bit sample method
+  * @param  __HANDLE__: specifies the UART Handle.  
+  * @retval None
+  */      
+#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
+
+/** @brief  Enable UART
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_ENABLE(__HANDLE__)                   ((__HANDLE__)->Instance->CR1 |=  USART_CR1_UE)
+
+/** @brief  Disable UART
+  * @param  __HANDLE__: specifies the UART Handle.
+  * @retval None
+  */
+#define __HAL_UART_DISABLE(__HANDLE__)                  ((__HANDLE__)->Instance->CR1 &=  ~USART_CR1_UE)
+
+/** @brief  Enable CTS flow control 
+  *         This macro allows to enable CTS hardware flow control for a given UART instance, 
+  *         without need to call HAL_UART_Init() function.
+  *         As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+  * @note   As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+  *         for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+  *           - UART instance should have already been initialised (through call of HAL_UART_Init() )
+  *           - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+  *             and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).                                                                                                                  
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         The Handle Instance can be USART1, USART2 or LPUART.
+  * @retval None
+  */
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__)        \
+  do{                                                      \
+    SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE);  \
+    (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE;        \
+  } while(0)
+
+/** @brief  Disable CTS flow control 
+  *         This macro allows to disable CTS hardware flow control for a given UART instance, 
+  *         without need to call HAL_UART_Init() function.
+  *         As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+  * @note   As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+  *         for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+  *           - UART instance should have already been initialised (through call of HAL_UART_Init() )
+  *           - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+  *             and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). 
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         The Handle Instance can be USART1, USART2 or LPUART.
+  * @retval None
+  */
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__)        \
+  do{                                                       \
+    CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+    (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE);      \
+  } while(0)
+
+/** @brief  Enable RTS flow control 
+  *         This macro allows to enable RTS hardware flow control for a given UART instance, 
+  *         without need to call HAL_UART_Init() function.
+  *         As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+  * @note   As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+  *         for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+  *           - UART instance should have already been initialised (through call of HAL_UART_Init() )
+  *           - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+  *             and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). 
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         The Handle Instance can be USART1, USART2 or LPUART.
+  * @retval None
+  */
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__)       \
+  do{                                                     \
+    SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+    (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE;       \
+  } while(0)
+
+/** @brief  Disable RTS flow control 
+  *         This macro allows to disable RTS hardware flow control for a given UART instance, 
+  *         without need to call HAL_UART_Init() function.
+  *         As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+  * @note   As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+  *         for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+  *           - UART instance should have already been initialised (through call of HAL_UART_Init() )
+  *           - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+  *             and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). 
+  * @param  __HANDLE__: specifies the UART Handle.
+  *         The Handle Instance can be USART1, USART2 or LPUART.
+  * @retval None
+  */
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__)       \
+  do{                                                      \
+    CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+    (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE);     \
+  } while(0)
+
+/**
+  * @}
+  */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup UART_Private_Macros   UART Private Macros
+  * @{
+  */
+/** @brief  BRR division operation to set BRR register with LPUART
+  * @param  _PCLK_: LPUART clock
+  * @param  _BAUD_: Baud rate set by the user
+  * @retval Division result
+  */
+#define UART_DIV_LPUART(_PCLK_, _BAUD_)                (((_PCLK_)*256)/((_BAUD_)))
+
+/** @brief  BRR division operation to set BRR register in 8-bit oversampling mode
+  * @param  _PCLK_: UART clock
+  * @param  _BAUD_: Baud rate set by the user
+  * @retval Division result
+  */
+#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_)             (((_PCLK_)*2)/((_BAUD_)))
+
+/** @brief  BRR division operation to set BRR register in 16-bit oversampling mode
+  * @param  _PCLK_: UART clock
+  * @param  _BAUD_: Baud rate set by the user
+  * @retval Division result
+  */
+#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_)             (((_PCLK_))/((_BAUD_)))
+
+/** @brief  Check UART Baud rate
+  * @param  BAUDRATE: Baudrate specified by the user
+  *         The maximum Baud Rate is derived from the maximum clock on F7 (i.e. 216 MHz)
+  *         divided by the smallest oversampling used on the USART (i.e. 8)
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
+
+/** @brief  Check UART assertion time
+  * @param  TIME: 5-bit value assertion time
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_UART_ASSERTIONTIME(TIME)    ((TIME) <= 0x1F)
+
+/** @brief  Check UART deassertion time
+  * @param  TIME: 5-bit value deassertion time
+  * @retval Test result (TRUE or FALSE).
+  */
+#define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F)
+
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+                                    ((STOPBITS) == UART_STOPBITS_2))
+
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+                                ((PARITY) == UART_PARITY_EVEN) || \
+                                ((PARITY) == UART_PARITY_ODD))
+
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+                              (((CONTROL) == UART_HWCONTROL_NONE) || \
+                               ((CONTROL) == UART_HWCONTROL_RTS) || \
+                               ((CONTROL) == UART_HWCONTROL_CTS) || \
+                               ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+
+#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00))
+
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+                              ((STATE) == UART_STATE_ENABLE))
+
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+                                        ((SAMPLING) == UART_OVERSAMPLING_8))
+
+#define IS_UART_ONE_BIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLE) || \
+                                        ((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLE))
+
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE)  (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+                                                    ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
+                                                    ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \
+                                                    ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
+
+#define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) || \
+                                           ((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE))
+
+#define IS_UART_LIN(LIN)            (((LIN) == UART_LIN_DISABLE) || \
+                                     ((LIN) == UART_LIN_ENABLE))
+
+#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
+                                      ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
+
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+                                                 ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+
+#define IS_UART_DMA_TX(DMATX)         (((DMATX) == UART_DMA_TX_DISABLE) || \
+                                       ((DMATX) == UART_DMA_TX_ENABLE))
+
+#define IS_UART_DMA_RX(DMARX)         (((DMARX) == UART_DMA_RX_DISABLE) || \
+                                       ((DMARX) == UART_DMA_RX_ENABLE))
+
+#define IS_UART_HALF_DUPLEX(HDSEL)         (((HDSEL) == UART_HALF_DUPLEX_DISABLE) || \
+                                            ((HDSEL) == UART_HALF_DUPLEX_ENABLE))
+
+#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
+                                          ((PARAM) == UART_SENDBREAK_REQUEST) || \
+                                          ((PARAM) == UART_MUTE_MODE_REQUEST) || \
+                                          ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \
+                                          ((PARAM) == UART_TXDATA_FLUSH_REQUEST))
+
+#define IS_UART_ADVFEATURE_INIT(INIT)           ((INIT) <= (UART_ADVFEATURE_NO_INIT | \
+                                                            UART_ADVFEATURE_TXINVERT_INIT | \
+                                                            UART_ADVFEATURE_RXINVERT_INIT | \
+                                                            UART_ADVFEATURE_DATAINVERT_INIT | \
+                                                            UART_ADVFEATURE_SWAP_INIT | \
+                                                            UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+                                                            UART_ADVFEATURE_DMADISABLEONERROR_INIT   | \
+                                                            UART_ADVFEATURE_AUTOBAUDRATE_INIT | \
+                                                            UART_ADVFEATURE_MSBFIRST_INIT))
+
+#define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) || \
+                                         ((TXINV) == UART_ADVFEATURE_TXINV_ENABLE))
+
+#define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) || \
+                                         ((RXINV) == UART_ADVFEATURE_RXINV_ENABLE))
+
+#define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) || \
+                                             ((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE))
+
+#define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) || \
+                                       ((SWAP) == UART_ADVFEATURE_SWAP_ENABLE))
+
+#define IS_UART_OVERRUN(OVERRUN)         (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) || \
+                                          ((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE))
+
+#define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE)  (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \
+                                                        ((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
+
+#define IS_UART_ADVFEATURE_DMAONRXERROR(DMA)      (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+                                                   ((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
+
+#define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \
+                                               ((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE))
+
+#define IS_UART_MUTE_MODE(MUTE)           (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \
+                                           ((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE))
+
+#define IS_UART_DE_POLARITY(POLARITY)    (((POLARITY) == UART_DE_POLARITY_HIGH) || \
+                                          ((POLARITY) == UART_DE_POLARITY_LOW))
+
+/**
+  * @}
+  */
+/* Include UART HAL Extension module */
+#include "stm32f7xx_hal_uart_ex.h"
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UART_Exported_Functions UART Exported Functions
+  * @{
+  */
+
+/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+
+/**
+  * @}
+  */
+
+/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
+  * @{
+  */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+
+/**
+  * @}
+  */
+
+/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+
+/* Peripheral Control functions  ************************************************/
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
+void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+
+/**
+  * @}
+  */
+
+/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions
+  * @{
+  */
+
+/* Peripheral State and Errors functions  **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private functions -----------------------------------------------------------*/
+/** @addtogroup UART_Private_Functions UART Private Functions
+  * @{
+  */
+
+HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_uart_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,335 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_uart_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of UART HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_UART_EX_H
+#define __STM32F7xx_HAL_UART_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup UARTEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
+  * @{
+  */
+  
+/** @defgroup UARTEx_Word_Length UARTEx Word Length
+  * @{
+  */
+#define UART_WORDLENGTH_7B                  ((uint32_t)USART_CR1_M_1)
+#define UART_WORDLENGTH_8B                  ((uint32_t)0x0000)
+#define UART_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M_0)
+#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \
+                                         ((__LENGTH__) == UART_WORDLENGTH_8B) || \
+                                         ((__LENGTH__) == UART_WORDLENGTH_9B))
+#define IS_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))																				 
+/**
+  * @}
+  */
+
+  
+/** @defgroup UARTEx_WakeUp_Address_Length UARTEx WakeUp Address Length
+  * @{
+  */
+#define UART_ADDRESS_DETECT_4B                ((uint32_t)0x00000000)
+#define UART_ADDRESS_DETECT_7B                ((uint32_t)USART_CR2_ADDM7)
+#define IS_UART_ADDRESSLENGTH_DETECT(__ADDRESS__) (((__ADDRESS__) == UART_ADDRESS_DETECT_4B) || \
+                                                   ((__ADDRESS__) == UART_ADDRESS_DETECT_7B))
+/**
+  * @}
+  */  
+
+  
+/**
+  * @}
+  */  
+  
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup UARTEx_Exported_Macros UARTEx Exported Macros
+  * @{
+  */
+           
+/** @brief  Reports the UART clock source.
+  * @param  __HANDLE__: specifies the UART Handle
+  * @param  __CLOCKSOURCE__: output variable   
+  * @retval UART clocking source, written in __CLOCKSOURCE__.
+  */
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+  do {                                                        \
+    if((__HANDLE__)->Instance == USART1)                      \
+    {                                                         \
+       switch(__HAL_RCC_GET_USART1_SOURCE())                  \
+       {                                                      \
+        case RCC_USART1CLKSOURCE_PCLK2:                       \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2;         \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_SYSCLK:                      \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
+          break;                                              \
+        case RCC_USART1CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          break;                                              \
+       }                                                      \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART2)                 \
+    {                                                         \
+       switch(__HAL_RCC_GET_USART2_SOURCE())                  \
+       {                                                      \
+        case RCC_USART2CLKSOURCE_PCLK1:                       \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_SYSCLK:                      \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
+          break;                                              \
+        case RCC_USART2CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          break;                                              \
+       }                                                      \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART3)                 \
+    {                                                         \
+       switch(__HAL_RCC_GET_USART3_SOURCE())                  \
+       {                                                      \
+        case RCC_USART3CLKSOURCE_PCLK1:                       \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_SYSCLK:                      \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
+          break;                                              \
+        case RCC_USART3CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          break;                                              \
+       }                                                      \
+    }                                                         \
+    else if((__HANDLE__)->Instance == UART4)                  \
+    {                                                         \
+       switch(__HAL_RCC_GET_UART4_SOURCE())                   \
+       {                                                      \
+        case RCC_UART4CLKSOURCE_PCLK1:                        \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_SYSCLK:                       \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
+          break;                                              \
+        case RCC_UART4CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          break;                                              \
+       }                                                      \
+    }                                                         \
+    else if ((__HANDLE__)->Instance == UART5)                 \
+    {                                                         \
+       switch(__HAL_RCC_GET_UART5_SOURCE())                   \
+       {                                                      \
+        case RCC_UART5CLKSOURCE_PCLK1:                        \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_SYSCLK:                       \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
+          break;                                              \
+        case RCC_UART5CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          break;                                              \
+       }                                                      \
+    }                                                         \
+    else if((__HANDLE__)->Instance == USART6)                 \
+    {                                                         \
+       switch(__HAL_RCC_GET_USART6_SOURCE())                  \
+       {                                                      \
+        case RCC_USART6CLKSOURCE_PCLK2:                       \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2;         \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_HSI:                         \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_SYSCLK:                      \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
+          break;                                              \
+        case RCC_USART6CLKSOURCE_LSE:                         \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          break;                                              \
+       }                                                      \
+    }                                                         \
+    else if ((__HANDLE__)->Instance == UART7)                 \
+    {                                                         \
+       switch(__HAL_RCC_GET_UART7_SOURCE())                   \
+       {                                                      \
+        case RCC_UART7CLKSOURCE_PCLK1:                        \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_SYSCLK:                       \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
+          break;                                              \
+        case RCC_UART7CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          break;                                              \
+       }                                                      \
+    } 																												\
+    else if ((__HANDLE__)->Instance == UART8)                 \
+    {                                                         \
+       switch(__HAL_RCC_GET_UART8_SOURCE())                   \
+       {                                                      \
+        case RCC_UART8CLKSOURCE_PCLK1:                        \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1;         \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI;           \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_SYSCLK:                       \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK;        \
+          break;                                              \
+        case RCC_UART8CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE;           \
+          break;                                              \
+        default:                                              \
+          break;                                              \
+       }                                                      \
+    } 																												\
+  } while(0)
+
+/** @brief  Reports the UART mask to apply to retrieve the received data
+  *         according to the word length and to the parity bits activation.
+  *         If PCE = 1, the parity bit is not included in the data extracted
+  *         by the reception API().
+  *         This masking operation is not carried out in the case of
+  *         DMA transfers.        
+  * @param  __HANDLE__: specifies the UART Handle
+  * @retval mask to apply to UART RDR register value.
+  */
+#define UART_MASK_COMPUTATION(__HANDLE__)                       \
+  do {                                                                \
+  if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B)            \
+  {                                                                   \
+     if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE)               \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x01FF ;                                 \
+     }                                                                \
+     else                                                             \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x00FF ;                                 \
+     }                                                                \
+  }                                                                   \
+  else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B)       \
+  {                                                                   \
+     if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE)               \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x00FF ;                                 \
+     }                                                                \
+     else                                                             \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x007F ;                                 \
+     }                                                                \
+  }                                                                   \
+  else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B)       \
+  {                                                                   \
+     if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE)               \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x007F ;                                 \
+     }                                                                \
+     else                                                             \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x003F ;                                 \
+     }                                                                \
+  }                                                                   \
+} while(0)
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_UART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_usart.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1818 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_usart.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   USART HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Universal Synchronous/Asynchronous Receiver Transmitter
+  *          Peripheral (USART).
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral Control functions
+  *
+  @verbatim
+  ===============================================================================
+                        ##### How to use this driver #####
+ ===============================================================================
+    [..]
+      The USART HAL driver can be used as follows:
+
+      (#) Declare a USART_HandleTypeDef handle structure.
+      (#) Initialize the USART low level resources by implement the HAL_USART_MspInit ()API:
+          (##) Enable the USARTx interface clock.
+          (##) USART pins configuration:
+            (+++) Enable the clock for the USART GPIOs.
+            (+++) Configure these USART pins as alternate function pull-up.
+          (##) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(),
+                HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
+            (+++) Configure the USARTx interrupt priority.
+            (+++) Enable the NVIC USART IRQ handle.
+            (+++) The specific USART interrupts (Transmission complete interrupt, 
+                  RXNE interrupt and Error Interrupts) will be managed using the macros
+                  __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process.
+          (##) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA()
+               HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
+            (+++) Declare a DMA handle structure for the Tx/Rx stream.
+            (+++) Enable the DMAx interface clock.
+            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.                
+            (+++) Configure the DMA Tx/Rx Stream.
+            (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle.
+            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
+
+      (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware 
+          flow control and Mode(Receiver/Transmitter) in the husart Init structure.
+
+      (#) Initialize the USART registers by calling the HAL_USART_Init() API:
+          (++) These API's configures also the low level Hardware (GPIO, CLOCK, CORTEX...etc)
+               by calling the customed HAL_USART_MspInit(&husart) API.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup USART USART
+  * @brief HAL USART Synchronous module driver
+  * @{
+  */
+
+#ifdef HAL_USART_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/** @addtogroup USART_Private_Constants
+  * @{
+  */
+#define DUMMY_DATA                             ((uint16_t) 0xFFFF)
+#define TEACK_REACK_TIMEOUT                    ((uint32_t) 1000)
+#define USART_CR1_FIELDS  ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \
+                                     USART_CR1_TE | USART_CR1_RE  | USART_CR1_OVER8))
+#define USART_CR2_FIELDS       ((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | \
+                            USART_CR2_CLKEN | USART_CR2_LBCL | USART_CR2_STOP))
+/**
+  * @}
+  */
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup USART_Private_Functions
+  * @{
+  */
+static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+static void USART_DMAError(DMA_HandleTypeDef *hdma);
+static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart);
+static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart);
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup USART_Exported_Functions USART Exported Functions
+  * @{
+  */
+
+/** @defgroup USART_Exported_Functions_Group1 USART Initialization and de-initialization functions
+  *  @brief    Initialization and Configuration functions
+  *
+@verbatim
+ ===============================================================================
+            ##### Initialization and Configuration functions #####
+ ===============================================================================
+    [..]
+    This subsection provides a set of functions allowing to initialize the USART
+    in asynchronous and in synchronous modes.
+      (+) For the asynchronous mode only these parameters can be configured:
+        (++) Baud Rate
+        (++) Word Length
+        (++) Stop Bit
+        (++) Parity: If the parity is enabled, then the MSB bit of the data written
+             in the data register is transmitted but is changed by the parity bit.
+             Depending on the frame length defined by the M1 and M0 bits (7-bit,
+             8-bit or 9-bit), the possible USART frame formats are as listed in the
+             following table:
+
+   (+++) +---------------------------------------------------------------+
+   (+++) | M1M0 bits |  PCE bit  |            USART frame                |
+   (+++) |-----------------------|---------------------------------------|
+   (+++) |     10    |     0     |    | SB | 7-bit data | STB |          |
+   (+++) |-----------|-----------|---------------------------------------|
+   (+++) |     10    |     1     |    | SB | 6-bit data | PB | STB |     |
+   (+++) +---------------------------------------------------------------+
+
+        (++) USART polarity
+        (++) USART phase
+        (++) USART LastBit
+        (++) Receiver/transmitter modes
+
+    [..]
+    The HAL_USART_Init() function follows the USART  synchronous configuration
+    procedure (details for the procedure are available in reference manual).
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the USART mode according to the specified
+  *         parameters in the USART_InitTypeDef and create the associated handle.
+  * @param husart: USART handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart)
+{
+  /* Check the USART handle allocation */
+  if(husart == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_USART_INSTANCE(husart->Instance));
+
+  if(husart->State == HAL_USART_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    husart->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware : GPIO, CLOCK */
+    HAL_USART_MspInit(husart);
+  }
+
+  husart->State = HAL_USART_STATE_BUSY;
+
+  /* Disable the Peripheral */
+  __HAL_USART_DISABLE(husart);
+
+  /* Set the Usart Communication parameters */
+  if (USART_SetConfig(husart) == HAL_ERROR)
+  {
+    return HAL_ERROR;
+  }
+
+  /* In Synchronous mode, the following bits must be kept cleared:
+  - LINEN bit in the USART_CR2 register
+  - HDSEL, SCEN and IREN bits in the USART_CR3 register.*/
+  husart->Instance->CR2 &= ~USART_CR2_LINEN;
+  husart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
+
+  /* Enable the Peripheral */
+  __HAL_USART_ENABLE(husart);
+
+  /* TEACK and/or REACK to check before moving husart->State to Ready */
+  return (USART_CheckIdleState(husart));
+}
+
+/**
+  * @brief DeInitializes the USART peripheral
+  * @param husart: USART handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart)
+{
+   /* Check the USART handle allocation */
+  if(husart == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_USART_INSTANCE(husart->Instance));
+
+  husart->State = HAL_USART_STATE_BUSY;
+
+  husart->Instance->CR1 = 0x0;
+  husart->Instance->CR2 = 0x0;
+  husart->Instance->CR3 = 0x0;
+
+  /* DeInit the low level hardware */
+  HAL_USART_MspDeInit(husart);
+
+  husart->ErrorCode = HAL_USART_ERROR_NONE;
+  husart->State = HAL_USART_STATE_RESET;
+
+  /* Process Unlock */
+  __HAL_UNLOCK(husart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief USART MSP Init
+  * @param husart: USART handle
+  * @retval None
+  */
+ __weak void HAL_USART_MspInit(USART_HandleTypeDef *husart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(husart);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_USART_MspInit can be implemented in the user file
+   */
+}
+
+/**
+  * @brief USART MSP DeInit
+  * @param husart: USART handle
+  * @retval None
+  */
+ __weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(husart);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_USART_MspDeInit can be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup USART_Exported_Functions_Group2 IO operation functions 
+  *  @brief   USART Transmit and Receive functions 
+  *
+@verbatim
+ ===============================================================================
+                      ##### IO operation functions #####
+ ===============================================================================
+    This subsection provides a set of functions allowing to manage the USART synchronous
+    data transfers.
+
+    [..] The USART supports master mode only: it cannot receive or send data related to an input
+         clock (SCLK is always an output).
+
+    (#) There are two mode of transfer:
+       (++) Blocking mode: The communication is performed in polling mode.
+            The HAL status of all data processing is returned by the same function
+            after finishing transfer.
+       (++) No-Blocking mode: The communication is performed using Interrupts
+           or DMA, These API's return the HAL status.
+           The end of the data processing will be indicated through the
+           dedicated USART IRQ when using Interrupt mode or the DMA IRQ when
+           using DMA mode.
+           The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback() user callbacks
+           will be executed respectively at the end of the transmit or Receive process
+           The HAL_USART_ErrorCallback()user callback will be executed when a communication error is detected
+
+    (#) Blocking mode API's are :
+        (++) HAL_USART_Transmit()in simplex mode
+        (++) HAL_USART_Receive() in full duplex receive only
+        (++) HAL_USART_TransmitReceive() in full duplex mode
+
+    (#) Non-Blocking mode API's with Interrupt are :
+        (++) HAL_USART_Transmit_IT()in simplex mode
+        (++) HAL_USART_Receive_IT() in full duplex receive only
+        (++) HAL_USART_TransmitReceive_IT()in full duplex mode
+        (++) HAL_USART_IRQHandler()
+
+    (#) No-Blocking mode functions with DMA are :
+        (++) HAL_USART_Transmit_DMA()in simplex mode
+        (++) HAL_USART_Receive_DMA() in full duplex receive only
+        (++) HAL_USART_TransmitReceive_DMA() in full duplex mode
+        (++) HAL_USART_DMAPause()
+        (++) HAL_USART_DMAResume()
+        (++) HAL_USART_DMAStop()
+
+    (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
+        (++) HAL_USART_TxCpltCallback()
+        (++) HAL_USART_RxCpltCallback()
+        (++) HAL_USART_TxHalfCpltCallback()
+        (++) HAL_USART_RxHalfCpltCallback()
+        (++) HAL_USART_ErrorCallback()
+        (++) HAL_USART_TxRxCpltCallback()
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Simplex Send an amount of data in blocking mode
+  * @param  husart: USART handle
+  * @param pTxData: pointer to data buffer
+  * @param Size: amount of data to be sent
+  * @param Timeout : Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pTxData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_TX;
+
+    husart->TxXferSize = Size;
+    husart->TxXferCount = Size;
+
+    /* Check the remaining data to be sent */
+    while(husart->TxXferCount > 0)
+    {
+      husart->TxXferCount--;
+      if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, Timeout) != HAL_OK)
+        {
+          return HAL_TIMEOUT;
+        }
+      if((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+      {
+        tmp = (uint16_t*) pTxData;
+        husart->Instance->TDR = (*tmp & (uint16_t)0x01FF);
+        pTxData += 2;
+      }
+      else
+      {
+        husart->Instance->TDR = (*pTxData++ & (uint8_t)0xFF);
+      }
+    }
+
+    if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, Timeout) != HAL_OK)
+    {
+      return HAL_TIMEOUT;
+    }
+
+    husart->State = HAL_USART_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in blocking mode
+  * @note To receive synchronous data, dummy data are simultaneously transmitted
+  * @param husart: USART handle
+  * @param pRxData: pointer to data buffer
+  * @param Size: amount of data to be received
+  * @param Timeout : Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+  uint16_t uhMask;
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pRxData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_RX;
+
+    husart->RxXferSize = Size;
+    husart->RxXferCount = Size;
+
+    /* Computation of USART mask to apply to RDR register */
+    __HAL_USART_MASK_COMPUTATION(husart);
+    uhMask = husart->Mask;
+
+    /* as long as data have to be received */
+    while(husart->RxXferCount > 0)
+    {
+      husart->RxXferCount--;
+
+      /* Wait until TC flag is set to send dummy byte in order to generate the
+      * clock for the slave to send data.
+       * Whatever the frame length (7, 8 or 9-bit long), the same dummy value
+       * can be written for all the cases. */
+      if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      husart->Instance->TDR = (DUMMY_DATA & (uint16_t)0x0FF);
+
+      /* Wait for RXNE Flag */
+      if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      if((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+      {
+        tmp = (uint16_t*) pRxData ;
+        *tmp = (uint16_t)(husart->Instance->RDR & uhMask);
+        pRxData +=2;
+      }
+      else
+      {
+        *pRxData++ = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask);
+      }
+    }
+
+    husart->State = HAL_USART_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Full-Duplex Send and Receive an amount of data in blocking mode
+  * @param husart: USART handle
+  * @param pTxData: pointer to TX data buffer
+  * @param pRxData: pointer to RX data buffer
+  * @param Size: amount of data to be sent (same amount to be received)
+  * @param Timeout : Timeout duration
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
+{
+  uint16_t* tmp;
+  uint16_t uhMask;
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
+    {
+      return  HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_RX;
+
+    husart->RxXferSize = Size;
+    husart->TxXferSize = Size;
+    husart->TxXferCount = Size;
+    husart->RxXferCount = Size;
+
+    /* Computation of USART mask to apply to RDR register */
+    __HAL_USART_MASK_COMPUTATION(husart);
+    uhMask = husart->Mask;
+
+    /* Check the remain data to be sent */
+    while(husart->TxXferCount > 0)
+    {
+      husart->TxXferCount--;
+      husart->RxXferCount--;
+
+      /* Wait until TC flag is set to send data */
+      if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+      if((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+      {
+        tmp = (uint16_t*) pTxData;
+        husart->Instance->TDR = (*tmp & uhMask);
+        pTxData += 2;
+      }
+      else
+      {
+        husart->Instance->TDR = (*pTxData++ & (uint8_t)uhMask);
+      }
+
+      /* Wait for RXNE Flag */
+      if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
+      {
+        return HAL_TIMEOUT;
+      }
+
+      if((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+      {
+        tmp = (uint16_t*) pRxData ;
+        *tmp = (uint16_t)(husart->Instance->RDR & uhMask);
+        pRxData +=2;
+      }
+      else
+      {
+        *pRxData++ = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask);
+      }
+    }
+
+    husart->State = HAL_USART_STATE_READY;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Send an amount of data in interrupt mode
+  * @param  husart: USART handle
+  * @param pTxData: pointer to data buffer
+  * @param Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
+{
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pTxData == NULL ) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->pTxBuffPtr = pTxData;
+    husart->TxXferSize = Size;
+    husart->TxXferCount = Size;
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_TX;
+
+    /* The USART Error Interrupts: (Frame error, noise error, overrun error)
+    are not managed by the USART Transmit Process to avoid the overrun interrupt
+    when the usart mode is configured for transmit and receive "USART_MODE_TX_RX"
+    to benefit for the frame error and noise interrupts the usart mode should be
+    configured only for transmit "USART_MODE_TX" */
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    /* Enable the USART Transmit Data Register Empty Interrupt */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_TXE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in blocking mode
+  *        To receive synchronous data, dummy data are simultaneously transmitted
+  * @param husart: USART handle
+  * @param pRxData: pointer to data buffer
+  * @param Size: amount of data to be received
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
+{
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pRxData == NULL ) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->pRxBuffPtr = pRxData;
+    husart->RxXferSize = Size;
+    husart->RxXferCount = Size;
+
+    __HAL_USART_MASK_COMPUTATION(husart);
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_RX;
+
+    /* Enable the USART Parity Error Interrupt */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_PE);
+
+    /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_ERR);
+
+    /* Enable the USART Data Register not empty Interrupt */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_RXNE);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+
+    /* Send dummy byte in order to generate the clock for the Slave to send the next data */
+    if(husart->Init.WordLength == USART_WORDLENGTH_9B)
+    {
+      husart->Instance->TDR = (DUMMY_DATA & (uint16_t)0x01FF); 
+    }
+    else
+    {
+      husart->Instance->TDR = (DUMMY_DATA & (uint16_t)0x00FF);
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Full-Duplex Send and Receive an amount of data in interrupt mode
+  * @param husart: USART handle
+  * @param pTxData: pointer to TX data buffer
+  * @param pRxData: pointer to RX data buffer
+  * @param Size: amount of data to be sent (same amount to be received)
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,  uint16_t Size)
+{
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->pRxBuffPtr = pRxData;
+    husart->RxXferSize = Size;
+    husart->RxXferCount = Size;
+    husart->pTxBuffPtr = pTxData;
+    husart->TxXferSize = Size;
+    husart->TxXferCount = Size;
+
+    /* Computation of USART mask to apply to RDR register */
+    __HAL_USART_MASK_COMPUTATION(husart);
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_TX_RX;
+
+    /* Enable the USART Data Register not empty Interrupt */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_RXNE);
+
+    /* Enable the USART Parity Error Interrupt */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_PE);
+
+    /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_ERR);
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    /* Enable the USART Transmit Data Register Empty Interrupt */
+    __HAL_USART_ENABLE_IT(husart, USART_IT_TXE);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+
+}
+
+/**
+  * @brief Send an amount of data in DMA mode
+  * @param husart: USART handle
+  * @param pTxData: pointer to data buffer
+  * @param Size: amount of data to be sent
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
+{
+  uint32_t *tmp;
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pTxData == NULL ) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->pTxBuffPtr = pTxData;
+    husart->TxXferSize = Size;
+    husart->TxXferCount = Size;
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_TX;
+
+    /* Set the USART DMA transfer complete callback */
+    husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
+
+    /* Set the USART DMA Half transfer complete callback */
+    husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
+
+    /* Set the DMA error callback */
+    husart->hdmatx->XferErrorCallback = USART_DMAError;
+
+    /* Enable the USART transmit DMA channel */
+    tmp = (uint32_t*)&pTxData;
+    HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->TDR, Size);
+
+
+    /* Clear the TC flag in the SR register by writing 0 to it */
+    __HAL_USART_CLEAR_IT(husart, USART_FLAG_TC);
+
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the USART CR3 register */
+    husart->Instance->CR3 |= USART_CR3_DMAT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Receive an amount of data in DMA mode
+  * @param husart: USART handle
+  * @param pRxData: pointer to data buffer
+  * @param Size: amount of data to be received
+  * @note   When the USART parity is enabled (PCE = 1), the received data contain
+  *         the parity bit (MSB position)
+  * @retval HAL status
+  * @note The USART DMA transmit stream must be configured in order to generate the clock for the slave.
+  */
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
+{
+  uint32_t *tmp;
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pRxData == NULL ) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->pRxBuffPtr = pRxData;
+    husart->RxXferSize = Size;
+    husart->pTxBuffPtr = pRxData;
+    husart->TxXferSize = Size;
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_RX;
+
+    /* Set the USART DMA Rx transfer complete callback */
+    husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
+
+    /* Set the USART DMA Half transfer complete callback */
+    husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
+
+    /* Set the USART DMA Rx transfer error callback */
+    husart->hdmarx->XferErrorCallback = USART_DMAError;
+
+    /* Enable the USART receive DMA channel */
+    tmp = (uint32_t*)&pRxData;
+    HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t*)tmp, Size);
+
+    /* Enable the USART transmit DMA channel: the transmit stream is used in order
+       to generate in the non-blocking mode the clock to the slave device,
+       this mode isn't a simplex receive mode but a full-duplex receive mode */
+    tmp = (uint32_t*)&pRxData;
+    HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->TDR, Size);
+
+    /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+       in the USART CR3 register */
+    husart->Instance->CR3 |= USART_CR3_DMAR;
+
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the USART CR3 register */
+    husart->Instance->CR3 |= USART_CR3_DMAT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Full-Duplex Transmit Receive an amount of data in non blocking mode 
+  * @param husart: USART handle
+  * @param pTxData: pointer to TX data buffer
+  * @param pRxData: pointer to RX data buffer
+  * @param Size: amount of data to be received/sent
+  * @note   When the USART parity is enabled (PCE = 1) the data received contain the parity bit.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
+{
+  uint32_t *tmp;
+
+  if(husart->State == HAL_USART_STATE_READY)
+  {
+    if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
+    {
+      return HAL_ERROR;
+    }
+    /* Process Locked */
+    __HAL_LOCK(husart);
+
+    husart->pRxBuffPtr = pRxData;
+    husart->RxXferSize = Size;
+    husart->pTxBuffPtr = pTxData;
+    husart->TxXferSize = Size;
+
+    husart->ErrorCode = HAL_USART_ERROR_NONE;
+    husart->State = HAL_USART_STATE_BUSY_TX_RX;
+
+    /* Set the USART DMA Rx transfer complete callback */
+    husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
+
+    /* Set the USART DMA Half transfer complete callback */
+    husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
+
+    /* Set the USART DMA Tx transfer complete callback */
+    husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
+
+    /* Set the USART DMA Half transfer complete callback */
+    husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
+
+    /* Set the USART DMA Tx transfer error callback */
+    husart->hdmatx->XferErrorCallback = USART_DMAError;
+
+    /* Set the USART DMA Rx transfer error callback */
+    husart->hdmarx->XferErrorCallback = USART_DMAError;
+
+    /* Enable the USART receive DMA channel */
+    tmp = (uint32_t*)&pRxData;
+    HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->RDR, *(uint32_t*)tmp, Size);
+
+    /* Enable the USART transmit DMA channel */
+    tmp = (uint32_t*)&pTxData;
+    HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->TDR, Size);
+
+    /* Clear the TC flag in the SR register by writing 0 to it */
+    __HAL_USART_CLEAR_IT(husart, USART_FLAG_TC);
+
+    /* Enable the DMA transfer for the receiver request by setting the DMAR bit
+       in the USART CR3 register */
+    husart->Instance->CR3 |= USART_CR3_DMAR;
+
+    /* Enable the DMA transfer for transmit request by setting the DMAT bit
+       in the USART CR3 register */
+    husart->Instance->CR3 |= USART_CR3_DMAT;
+
+    /* Process Unlocked */
+    __HAL_UNLOCK(husart);
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief Pauses the DMA Transfer.
+  * @param husart: USART handle
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart)
+{
+  /* Process Locked */
+  __HAL_LOCK(husart);
+
+  if(husart->State == HAL_USART_STATE_BUSY_TX)
+  {
+    /* Disable the USART DMA Tx request */
+    husart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+  }
+  else if(husart->State == HAL_USART_STATE_BUSY_RX)
+  {
+    /* Disable the USART DMA Rx request */
+    husart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+  }
+  else if(husart->State == HAL_USART_STATE_BUSY_TX_RX)
+  {
+    /* Disable the USART DMA Tx request */
+    husart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+    /* Disable the USART DMA Rx request */
+    husart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(husart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Resumes the DMA Transfer.
+  * @param husart: USART handle
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart)
+{
+  /* Process Locked */
+  __HAL_LOCK(husart);
+
+  if(husart->State == HAL_USART_STATE_BUSY_TX)
+  {
+    /* Enable the USART DMA Tx request */
+    husart->Instance->CR3 |= USART_CR3_DMAT;
+  }
+  else if(husart->State == HAL_USART_STATE_BUSY_RX)
+  {
+    /* Clear the Overrun flag before resuming the Rx transfer*/
+    __HAL_USART_CLEAR_IT(husart, USART_CLEAR_OREF);
+
+    /* Enable the USART DMA Rx request */
+    husart->Instance->CR3 |= USART_CR3_DMAR;
+  }
+  else if(husart->State == HAL_USART_STATE_BUSY_TX_RX)
+  {
+    /* Clear the Overrun flag before resuming the Rx transfer*/
+    __HAL_USART_CLEAR_IT(husart, USART_CLEAR_OREF);
+
+    /* Enable the USART DMA Rx request  before the DMA Tx request */
+    husart->Instance->CR3 |= USART_CR3_DMAR;
+
+    /* Enable the USART DMA Tx request */
+    husart->Instance->CR3 |= USART_CR3_DMAT;
+  }
+
+  /* Process Unlocked */
+  __HAL_UNLOCK(husart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief Stops the DMA Transfer.
+  * @param husart: USART handle
+  * @retval None
+  */
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart)
+{
+  /* The Lock is not implemented on this API to allow the user application
+     to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback() /
+     HAL_USART_TxHalfCpltCallback / HAL_USART_RxHalfCpltCallback: 
+     indeed, when HAL_DMA_Abort() API is called, the DMA TX/RX Transfer or Half Transfer complete  
+     interrupt is generated if the DMA transfer interruption occurs at the middle or at the end of 
+     the stream and the corresponding call back is executed. */
+
+  /* Disable the USART Tx/Rx DMA requests */
+  husart->Instance->CR3 &= ~USART_CR3_DMAT;
+  husart->Instance->CR3 &= ~USART_CR3_DMAR;
+
+  /* Abort the USART DMA tx Stream */
+  if(husart->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(husart->hdmatx);
+  }
+  /* Abort the USART DMA rx Stream */
+  if(husart->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(husart->hdmarx);
+  }
+
+  husart->State = HAL_USART_STATE_READY;
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  This function handles USART interrupt request.
+  * @param  husart: USART handle
+  * @retval None
+  */
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart)
+{
+
+  /* USART parity error interrupt occurred ------------------------------------*/
+  if((__HAL_USART_GET_IT(husart, USART_IT_PE) != RESET) && (__HAL_USART_GET_IT_SOURCE(husart, USART_IT_PE) != RESET))
+  {
+    __HAL_USART_CLEAR_IT(husart, USART_CLEAR_PEF);
+    husart->ErrorCode |= HAL_USART_ERROR_PE;
+    /* Set the USART state ready to be able to start again the process */
+    husart->State = HAL_USART_STATE_READY;
+  }
+
+  /* USART frame error interrupt occurred -------------------------------------*/
+  if((__HAL_USART_GET_IT(husart, USART_IT_FE) != RESET) && (__HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR) != RESET))
+  {
+    __HAL_USART_CLEAR_IT(husart, USART_CLEAR_FEF);
+    husart->ErrorCode |= HAL_USART_ERROR_FE;
+    /* Set the USART state ready to be able to start again the process */
+    husart->State = HAL_USART_STATE_READY;
+  }
+
+  /* USART noise error interrupt occurred -------------------------------------*/
+  if((__HAL_USART_GET_IT(husart, USART_IT_NE) != RESET) && (__HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR) != RESET))
+  {
+    __HAL_USART_CLEAR_IT(husart, USART_CLEAR_NEF);
+    husart->ErrorCode |= HAL_USART_ERROR_NE;
+    /* Set the USART state ready to be able to start again the process */
+    husart->State = HAL_USART_STATE_READY;
+  }
+
+  /* USART Over-Run interrupt occurred ----------------------------------------*/
+  if((__HAL_USART_GET_IT(husart, USART_IT_ORE) != RESET) && (__HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR) != RESET))
+  {
+    __HAL_USART_CLEAR_IT(husart, USART_CLEAR_OREF);
+    husart->ErrorCode |= HAL_USART_ERROR_ORE;
+    /* Set the USART state ready to be able to start again the process */
+    husart->State = HAL_USART_STATE_READY;
+  }
+
+   /* Call USART Error Call back function if need be --------------------------*/
+  if(husart->ErrorCode != HAL_USART_ERROR_NONE)
+  {
+    HAL_USART_ErrorCallback(husart);
+  }
+
+  /* USART in mode Receiver --------------------------------------------------*/
+  if((__HAL_USART_GET_IT(husart, USART_IT_RXNE) != RESET) && (__HAL_USART_GET_IT_SOURCE(husart, USART_IT_RXNE) != RESET))
+  {
+    if(husart->State == HAL_USART_STATE_BUSY_RX)
+    {
+      USART_Receive_IT(husart);
+    }
+    else
+    {
+      USART_TransmitReceive_IT(husart);
+    }
+  }
+
+  /* USART in mode Transmitter -----------------------------------------------*/
+  if((__HAL_USART_GET_IT(husart, USART_IT_TXE) != RESET) &&(__HAL_USART_GET_IT_SOURCE(husart, USART_IT_TXE) != RESET))
+  {
+    if(husart->State == HAL_USART_STATE_BUSY_TX)
+    {
+      USART_Transmit_IT(husart);
+    }
+    else
+    {
+      USART_TransmitReceive_IT(husart);
+    }
+  }
+
+  /* USART in mode Transmitter (transmission end) -----------------------------*/
+  if((__HAL_USART_GET_IT(husart, USART_IT_TC) != RESET) &&(__HAL_USART_GET_IT_SOURCE(husart, USART_IT_TC) != RESET))
+  {
+    USART_EndTransmit_IT(husart);
+  }
+	
+}
+
+/**
+  * @brief Tx Transfer completed callbacks
+  * @param husart: USART handle
+  * @retval None
+  */
+__weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(husart);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_USART_TxCpltCallback can be implemented in the user file
+   */ 
+}
+
+/**
+  * @brief  Tx Half Transfer completed callbacks.
+  * @param  husart: USART handle
+  * @retval None
+  */
+ __weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(husart);
+ 
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_USART_TxHalfCpltCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @brief  Rx Transfer completed callbacks.
+  * @param  husart: USART handle
+  * @retval None
+  */
+__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(husart);
+ 
+  /* NOTE: This function should not be modified, when the callback is needed,
+           the HAL_USART_RxCpltCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @brief Rx Half Transfer completed callbacks
+  * @param husart: usart handle
+  * @retval None
+  */
+__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(husart);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_USART_RxHalfCpltCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @brief Tx/Rx Transfers completed callback for the non-blocking process
+  * @param husart: USART handle
+  * @retval None
+  */
+__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(husart);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_USART_TxRxCpltCallback can be implemented in the user file
+   */
+}
+
+/**
+  * @brief USART error callbacks
+  * @param husart: USART handle
+  * @retval None
+  */
+__weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(husart);
+ 
+  /* NOTE : This function should not be modified, when the callback is needed,
+            the HAL_USART_ErrorCallback can be implemented in the user file
+   */ 
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup USART_Exported_Functions_Group3 Peripheral State and Errors functions 
+  *  @brief   USART State and Errors functions 
+  *
+@verbatim   
+  ==============================================================================
+                  ##### Peripheral State and Errors functions #####
+  ==============================================================================  
+  [..]
+    This subsection provides a set of functions allowing to return the State of 
+    USART communication
+    process, return Peripheral Errors occurred during communication process
+     (+) HAL_USART_GetState() API can be helpful to check in run-time the state 
+         of the USART peripheral.
+     (+) HAL_USART_GetError() check in run-time errors that could be occurred during 
+         communication. 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief return the USART state
+  * @param husart: USART handle
+  * @retval HAL state
+  */
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart)
+{
+  return husart->State;
+}
+
+/**
+  * @brief  Return the USART error code
+  * @param  husart : pointer to a USART_HandleTypeDef structure that contains
+  *              the configuration information for the specified USART.
+  * @retval USART Error Code
+  */
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart)
+{
+  return husart->ErrorCode;
+}
+
+/**
+  * @}
+  */
+  
+
+/**
+  * @brief  Simplex Send an amount of data in non-blocking mode.
+  * @note   Function called under interruption only, once
+  *         interruptions have been enabled by HAL_USART_Transmit_IT().
+  * @param  husart: USART handle
+  * @retval HAL status
+  * @note   The USART errors are not managed to avoid the overrun error.
+  */
+static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart)
+{
+  uint16_t* tmp;
+
+  if(husart->State == HAL_USART_STATE_BUSY_TX)
+  {
+
+    if(husart->TxXferCount == 0)
+    {
+      /* Disable the USART Transmit Complete Interrupt */
+      __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
+
+      /* Enable the USART Transmit Complete Interrupt */
+      __HAL_USART_ENABLE_IT(husart, USART_IT_TC);
+
+      return HAL_OK;
+    }
+    else
+    {
+      if((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+      {
+        tmp = (uint16_t*) husart->pTxBuffPtr;
+        husart->Instance->TDR = (*tmp & (uint16_t)0x01FF);   
+        husart->pTxBuffPtr += 2;
+      }
+      else
+      {
+        husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0xFF);       
+      }
+
+      husart->TxXferCount--;
+
+      return HAL_OK;
+    }
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Wraps up transmission in non-blocking mode.
+  * @param  husart: pointer to a USART_HandleTypeDef structure that contains
+  *                the configuration information for the specified USART module.
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart)
+{
+  /* Disable the USART Transmit Complete Interrupt */
+  __HAL_USART_DISABLE_IT(husart, USART_IT_TC);
+
+  /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+  __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+  husart->State = HAL_USART_STATE_READY;
+
+  HAL_USART_TxCpltCallback(husart);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  Simplex Receive an amount of data in non-blocking mode.
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_USART_Receive_IT()
+  * @param  husart: USART handle
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart)
+{
+  uint16_t* tmp;
+  uint16_t uhMask = husart->Mask;
+
+  if(husart->State == HAL_USART_STATE_BUSY_RX)
+  {
+
+    if((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+    {
+      tmp = (uint16_t*) husart->pRxBuffPtr;
+      *tmp = (uint16_t)(husart->Instance->RDR & uhMask);
+      husart->pRxBuffPtr += 2;
+    }
+    else
+    {
+      *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask);
+    }
+      /* Send dummy byte in order to generate the clock for the Slave to Send the next data */
+      husart->Instance->TDR = (DUMMY_DATA & (uint16_t)0x00FF);
+
+    if(--husart->RxXferCount == 0)
+    {
+      __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
+
+      /* Disable the USART Parity Error Interrupt */
+      __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
+
+      /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+      __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+      husart->State = HAL_USART_STATE_READY;
+
+      HAL_USART_RxCpltCallback(husart);
+
+      return HAL_OK;
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking).
+  *         Function called under interruption only, once
+  *         interruptions have been enabled by HAL_USART_TransmitReceive_IT()     
+  * @param  husart: USART handle
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart)
+{
+  uint16_t* tmp;
+  uint16_t uhMask = husart->Mask;
+
+  if(husart->State == HAL_USART_STATE_BUSY_TX_RX)
+  {
+    if(husart->TxXferCount != 0x00)
+    {
+      if(__HAL_USART_GET_FLAG(husart, USART_FLAG_TXE) != RESET)
+      {
+        if((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+        {
+          tmp = (uint16_t*) husart->pTxBuffPtr;
+          husart->Instance->TDR = (uint16_t)(*tmp & uhMask);
+          husart->pTxBuffPtr += 2;
+        }
+        else
+        {
+          husart->Instance->TDR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)uhMask);
+        }
+        husart->TxXferCount--;
+
+        /* Check the latest data transmitted */
+        if(husart->TxXferCount == 0)
+        {
+           __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
+        }
+      }
+    }
+
+    if(husart->RxXferCount != 0x00)
+    {
+      if(__HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE) != RESET)
+      {
+        if((husart->Init.WordLength == USART_WORDLENGTH_9B) && (husart->Init.Parity == USART_PARITY_NONE))
+        {
+          tmp = (uint16_t*) husart->pRxBuffPtr;
+          *tmp = (uint16_t)(husart->Instance->RDR & uhMask);
+          husart->pRxBuffPtr += 2;
+        }
+        else
+        {
+          *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->RDR & (uint8_t)uhMask);
+        }
+        husart->RxXferCount--;
+      }
+    }
+
+    /* Check the latest data received */
+    if(husart->RxXferCount == 0)
+    {
+      __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
+
+      /* Disable the USART Parity Error Interrupt */
+      __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
+
+      /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
+      __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+      husart->State = HAL_USART_STATE_READY;
+
+      HAL_USART_TxRxCpltCallback(husart);
+
+      return HAL_OK;
+    }
+
+    return HAL_OK;
+  }
+  else
+  {
+    return HAL_BUSY;
+  }
+}
+
+/**
+  * @brief  This function handles USART Communication Timeout.
+  * @param  husart: USART handle
+  * @param  Flag: specifies the USART flag to check.
+  * @param  Status: The new Flag status (SET or RESET).
+  * @param  Timeout: Timeout duration
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Timeout)  
+{
+  uint32_t tickstart = HAL_GetTick();
+
+  /* Wait until flag is set */
+  if(Status == RESET)
+  {
+    while(__HAL_USART_GET_FLAG(husart, Flag) == RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick()-tickstart) >=  Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
+          __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
+          __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
+          __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+          husart->State= HAL_USART_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(husart);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  else
+  {
+    while(__HAL_USART_GET_FLAG(husart, Flag) != RESET)
+    {
+      /* Check for the Timeout */
+      if(Timeout != HAL_MAX_DELAY)
+      {
+        if((Timeout == 0)||((HAL_GetTick()-tickstart) >=  Timeout))
+        {
+          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
+          __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
+          __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
+          __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
+          __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
+
+          husart->State= HAL_USART_STATE_READY;
+
+          /* Process Unlocked */
+          __HAL_UNLOCK(husart);
+
+          return HAL_TIMEOUT;
+        }
+      }
+    }
+  }
+  return HAL_OK;
+}
+
+
+/**
+  * @brief DMA USART transmit process complete callback
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
+{
+  USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* DMA Normal mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  { 
+    husart->TxXferCount = 0;
+
+    if(husart->State == HAL_USART_STATE_BUSY_TX)
+    {
+      /* Disable the DMA transfer for transmit request by resetting the DMAT bit
+         in the USART CR3 register */
+      husart->Instance->CR3 &= ~(USART_CR3_DMAT);
+
+      /* Enable the USART Transmit Complete Interrupt */
+      __HAL_USART_ENABLE_IT(husart, USART_IT_TC);
+    }
+  }
+  /* DMA Circular mode */
+  else
+  {
+    if(husart->State == HAL_USART_STATE_BUSY_TX)
+    {
+    HAL_USART_TxCpltCallback(husart);
+   }
+ }
+}
+
+
+/**
+  * @brief DMA USART transmit process half complete callback
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_USART_TxHalfCpltCallback(husart);
+}
+
+/**
+  * @brief DMA USART receive process complete callback
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+  USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  /* DMA Normal mode */
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  { 
+    husart->RxXferCount = 0;
+
+    /* Disable the DMA RX transfer for the receiver request by resetting the DMAR bit
+    in USART CR3 register */
+    husart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAR);
+    /* similarly, disable the DMA TX transfer that was started to provide the
+       clock to the slave device */
+    husart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);
+
+      if(husart->State == HAL_USART_STATE_BUSY_RX)
+      {
+        HAL_USART_RxCpltCallback(husart);
+      }
+      /* The USART state is HAL_USART_STATE_BUSY_TX_RX */
+      else
+      {
+        HAL_USART_TxRxCpltCallback(husart);
+      }
+    husart->State= HAL_USART_STATE_READY;
+  }
+  /* DMA circular mode */
+  else
+  {
+    if(husart->State == HAL_USART_STATE_BUSY_RX)
+    {
+      HAL_USART_RxCpltCallback(husart);
+    }
+    /* The USART state is HAL_USART_STATE_BUSY_TX_RX */
+    else
+    {
+      HAL_USART_TxRxCpltCallback(husart);
+    }
+  }
+}
+
+/**
+  * @brief DMA USART receive process half complete callback
+  * @param hdma : DMA handle
+  * @retval None
+  */
+static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
+{
+  USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
+
+  HAL_USART_RxHalfCpltCallback(husart);
+}
+
+/**
+  * @brief DMA USART communication error callback
+  * @param  hdma: DMA handle
+  * @retval None
+  */
+static void USART_DMAError(DMA_HandleTypeDef *hdma)
+{
+  USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
+
+  husart->RxXferCount = 0;
+  husart->TxXferCount = 0;
+  husart->ErrorCode |= HAL_USART_ERROR_DMA;
+  husart->State= HAL_USART_STATE_READY;
+
+  HAL_USART_ErrorCallback(husart);
+}
+
+/**
+  * @brief Configure the USART peripheral 
+  * @param husart: USART handle
+  * @retval None
+  */
+static HAL_StatusTypeDef USART_SetConfig(USART_HandleTypeDef *husart)
+{
+  uint32_t tmpreg      = 0x0;
+  USART_ClockSourceTypeDef clocksource = USART_CLOCKSOURCE_UNDEFINED;
+  HAL_StatusTypeDef ret                = HAL_OK;
+  uint16_t brrtemp                     = 0x0000;
+  uint16_t usartdiv                    = 0x0000;
+  
+  /* Check the parameters */
+  assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity));
+  assert_param(IS_USART_PHASE(husart->Init.CLKPhase));
+  assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit));
+  assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate));  
+  assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength));
+  assert_param(IS_USART_STOPBITS(husart->Init.StopBits));
+  assert_param(IS_USART_PARITY(husart->Init.Parity));
+  assert_param(IS_USART_MODE(husart->Init.Mode));
+  assert_param(IS_USART_OVERSAMPLING(husart->Init.OverSampling));   
+
+
+  /*-------------------------- USART CR1 Configuration -----------------------*/
+   /* Clear M, PCE, PS, TE and RE bits and configure       
+   *  the USART Word Length, Parity, Mode and OverSampling: 
+   *  set the M bits according to husart->Init.WordLength value 
+   *  set PCE and PS bits according to husart->Init.Parity value
+   *  set TE and RE bits according to husart->Init.Mode value
+   *  force OVER8 to 1 to allow to reach the maximum speed (Fclock/8) */
+  tmpreg = (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8;
+  MODIFY_REG(husart->Instance->CR1, USART_CR1_FIELDS, tmpreg);
+  
+  /*---------------------------- USART CR2 Configuration ---------------------*/
+  /* Clear and configure the USART Clock, CPOL, CPHA, LBCL and STOP bits:
+   * set CPOL bit according to husart->Init.CLKPolarity value
+   * set CPHA bit according to husart->Init.CLKPhase value
+   * set LBCL bit according to husart->Init.CLKLastBit value
+   * set STOP[13:12] bits according to husart->Init.StopBits value */
+  tmpreg = (uint32_t)(USART_CLOCK_ENABLE); 
+  tmpreg |= ((uint32_t)husart->Init.CLKPolarity | (uint32_t)husart->Init.CLKPhase);
+  tmpreg |= ((uint32_t)husart->Init.CLKLastBit | (uint32_t)husart->Init.StopBits);
+  MODIFY_REG(husart->Instance->CR2, USART_CR2_FIELDS, tmpreg);
+
+  /*-------------------------- USART CR3 Configuration -----------------------*/
+  /* no CR3 register configuration                                            */
+
+  /*-------------------------- USART BRR Configuration -----------------------*/
+  /* BRR is filled-up according to OVER8 bit setting which is forced to 1     */
+  USART_GETCLOCKSOURCE(husart, clocksource);
+  switch (clocksource)
+  {
+    case USART_CLOCKSOURCE_PCLK1:
+      usartdiv = (uint16_t)((2*HAL_RCC_GetPCLK1Freq()) / husart->Init.BaudRate);
+      break;
+    case USART_CLOCKSOURCE_PCLK2:
+      usartdiv = (uint16_t)((2*HAL_RCC_GetPCLK2Freq()) / husart->Init.BaudRate);
+      break;
+    case USART_CLOCKSOURCE_HSI:
+      usartdiv = (uint16_t)((2*HSI_VALUE) / husart->Init.BaudRate);
+      break;
+    case USART_CLOCKSOURCE_SYSCLK:
+      usartdiv = (uint16_t)((2*HAL_RCC_GetSysClockFreq()) / husart->Init.BaudRate);
+      break;
+    case USART_CLOCKSOURCE_LSE:
+      usartdiv = (uint16_t)((2*LSE_VALUE) / husart->Init.BaudRate);
+      break;
+    case USART_CLOCKSOURCE_UNDEFINED:
+    default:
+      ret = HAL_ERROR;
+      break;
+  } 
+  
+  brrtemp = usartdiv & 0xFFF0;
+  brrtemp |= (uint16_t)((usartdiv & (uint16_t)0x000F) >> 1U);
+  husart->Instance->BRR = brrtemp;
+  
+  return ret; 
+}
+
+/**
+  * @brief Check the USART Idle State
+  * @param husart: USART handle
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef USART_CheckIdleState(USART_HandleTypeDef *husart)
+{
+   /* Initialize the USART ErrorCode */
+  husart->ErrorCode = HAL_USART_ERROR_NONE;
+  
+  /* Check if the Transmitter is enabled */
+  if((husart->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
+  {
+    /* Wait until TEACK flag is set */
+    if(USART_WaitOnFlagUntilTimeout(husart, USART_ISR_TEACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)  
+    { 
+      husart->State= HAL_USART_STATE_TIMEOUT;      
+      return HAL_TIMEOUT;
+    } 
+  }
+  /* Check if the Receiver is enabled */
+  if((husart->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
+  {
+    /* Wait until REACK flag is set */
+    if(USART_WaitOnFlagUntilTimeout(husart, USART_ISR_REACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)  
+    { 
+      husart->State= HAL_USART_STATE_TIMEOUT;       
+      return HAL_TIMEOUT;
+    }
+  }
+  
+  /* Initialize the USART state*/
+  husart->State= HAL_USART_STATE_READY;
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(husart);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @}
+  */
+
+#endif /* HAL_USART_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_usart.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,696 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_usart.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of USART HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_USART_H
+#define __STM32F7xx_HAL_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup USART
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Types USART Exported Types
+  * @{
+  */
+
+/**
+  * @brief USART Init Structure definition
+  */
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< This member configures the Usart communication baud rate.
+                                           The baud rate is computed using the following formula:
+                                              Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate))) */
+
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter can be a value of @ref USARTEx_Word_Length */
+
+  uint32_t StopBits;                  /*!< Specifies the number of stop bits transmitted.
+                                           This parameter can be a value of @ref USART_Stop_Bits */
+
+  uint32_t Parity;                   /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref USART_Parity
+                                           @note When parity is enabled, the computed parity is inserted
+                                                 at the MSB position of the transmitted data (9th bit when
+                                                 the word length is set to 9 data bits; 8th bit when the
+                                                 word length is set to 8 data bits). */
+
+  uint32_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref USART_Mode */
+
+  uint32_t OverSampling;              /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+                                           This parameter can be a value of @ref USART_Over_Sampling */                                                                                        
+
+  uint32_t CLKPolarity;               /*!< Specifies the steady state of the serial clock.
+                                           This parameter can be a value of @ref USART_Clock_Polarity */
+
+  uint32_t CLKPhase;                  /*!< Specifies the clock transition on which the bit capture is made.
+                                           This parameter can be a value of @ref USART_Clock_Phase */
+
+  uint32_t CLKLastBit;                /*!< Specifies whether the clock pulse corresponding to the last transmitted
+                                           data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+                                           This parameter can be a value of @ref USART_Last_Bit */
+}USART_InitTypeDef;
+
+/**
+  * @brief HAL USART State structures definition
+  */
+typedef enum
+{
+  HAL_USART_STATE_RESET             = 0x00,    /*!< Peripheral is not initialized   */
+  HAL_USART_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use */
+  HAL_USART_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing */
+  HAL_USART_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing */
+  HAL_USART_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing */
+  HAL_USART_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission Reception process is ongoing */
+  HAL_USART_STATE_TIMEOUT           = 0x03,    /*!< Timeout state */
+  HAL_USART_STATE_ERROR             = 0x04     /*!< Error */
+}HAL_USART_StateTypeDef;
+
+
+/**
+  * @brief  USART clock sources definitions
+  */
+typedef enum
+{
+  USART_CLOCKSOURCE_PCLK1      = 0x00,    /*!< PCLK1 clock source  */
+  USART_CLOCKSOURCE_PCLK2      = 0x01,    /*!< PCLK2 clock source  */
+  USART_CLOCKSOURCE_HSI        = 0x02,    /*!< HSI clock source    */
+  USART_CLOCKSOURCE_SYSCLK     = 0x04,    /*!< SYSCLK clock source */
+  USART_CLOCKSOURCE_LSE        = 0x08,    /*!< LSE clock source       */
+  USART_CLOCKSOURCE_UNDEFINED  = 0x10     /*!< Undefined clock source */
+}USART_ClockSourceTypeDef;
+
+
+/**
+  * @brief  USART handle Structure definition
+  */
+typedef struct
+{
+  USART_TypeDef                 *Instance;        /*!<  USART registers base address        */
+
+  USART_InitTypeDef             Init;             /*!< USART communication parameters      */
+
+  uint8_t                       *pTxBuffPtr;      /*!< Pointer to USART Tx transfer Buffer */
+
+  uint16_t                      TxXferSize;       /*!< USART Tx Transfer size              */
+
+  uint16_t                      TxXferCount;      /*!< USART Tx Transfer Counter           */
+
+  uint8_t                       *pRxBuffPtr;      /*!< Pointer to USART Rx transfer Buffer */
+
+  uint16_t                      RxXferSize;       /*!< USART Rx Transfer size              */
+
+  uint16_t                      RxXferCount;      /*!< USART Rx Transfer Counter           */
+
+  uint16_t                      Mask;             /*!< USART Rx RDR register mask          */
+
+  DMA_HandleTypeDef             *hdmatx;          /*!< USART Tx DMA Handle parameters      */
+
+  DMA_HandleTypeDef             *hdmarx;          /*!< USART Rx DMA Handle parameters      */
+
+  HAL_LockTypeDef               Lock;            /*!<  Locking object                      */
+
+  HAL_USART_StateTypeDef        State;           /*!< USART communication state           */
+
+  __IO uint32_t                 ErrorCode;       /*!< USART Error code                    */
+
+}USART_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_Exported_Constants USART Exported Constants
+  * @{
+  */
+
+/** @defgroup USART_Error_Code USART Error Code
+  * @brief    USART Error Code 
+  * @{
+  */ 
+#define HAL_USART_ERROR_NONE         ((uint32_t)0x00000000)   /*!< No error            */
+#define HAL_USART_ERROR_PE           ((uint32_t)0x00000001)   /*!< Parity error        */
+#define HAL_USART_ERROR_NE           ((uint32_t)0x00000002)   /*!< Noise error         */
+#define HAL_USART_ERROR_FE           ((uint32_t)0x00000004)   /*!< Frame error         */
+#define HAL_USART_ERROR_ORE          ((uint32_t)0x00000008)   /*!< Overrun error       */
+#define HAL_USART_ERROR_DMA          ((uint32_t)0x00000010)   /*!< DMA transfer error  */
+/**
+  * @}
+  */
+
+/** @defgroup USART_Stop_Bits  USART Number of Stop Bits
+  * @{
+  */
+#define USART_STOPBITS_1                     ((uint32_t)0x0000)
+#define USART_STOPBITS_2                     ((uint32_t)USART_CR2_STOP_1)
+#define USART_STOPBITS_1_5                   ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+/**
+  * @}
+  */
+
+/** @defgroup USART_Parity    USART Parity
+  * @{
+  */
+#define USART_PARITY_NONE                   ((uint32_t)0x0000)
+#define USART_PARITY_EVEN                   ((uint32_t)USART_CR1_PCE)
+#define USART_PARITY_ODD                    ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+  * @}
+  */
+
+/** @defgroup USART_Mode   USART Mode
+  * @{
+  */
+#define USART_MODE_RX                       ((uint32_t)USART_CR1_RE)
+#define USART_MODE_TX                       ((uint32_t)USART_CR1_TE)
+#define USART_MODE_TX_RX                    ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+  * @}
+  */
+
+/** @defgroup USART_Over_Sampling USART Over Sampling
+  * @{
+  */
+#define USART_OVERSAMPLING_16               ((uint32_t)0x0000)
+#define USART_OVERSAMPLING_8                ((uint32_t)USART_CR1_OVER8)
+/**
+  * @}
+  */
+/** @defgroup USART_Clock  USART Clock
+  * @{
+  */
+#define USART_CLOCK_DISABLE                 ((uint32_t)0x0000)
+#define USART_CLOCK_ENABLE                  ((uint32_t)USART_CR2_CLKEN)
+/**
+  * @}
+  */
+
+/** @defgroup USART_Clock_Polarity  USART Clock Polarity
+  * @{
+  */
+#define USART_POLARITY_LOW                  ((uint32_t)0x0000)
+#define USART_POLARITY_HIGH                 ((uint32_t)USART_CR2_CPOL)
+/**
+  * @}
+  */
+
+/** @defgroup USART_Clock_Phase   USART Clock Phase
+  * @{
+  */
+#define USART_PHASE_1EDGE                   ((uint32_t)0x0000)
+#define USART_PHASE_2EDGE                   ((uint32_t)USART_CR2_CPHA)
+/**
+  * @}
+  */
+
+/** @defgroup USART_Last_Bit  USART Last Bit
+  * @{
+  */
+#define USART_LASTBIT_DISABLE               ((uint32_t)0x0000)
+#define USART_LASTBIT_ENABLE                ((uint32_t)USART_CR2_LBCL)
+/**
+  * @}
+  */
+
+/** @defgroup USART_Request_Parameters  USART Request Parameters
+  * @{
+  */
+#define USART_RXDATA_FLUSH_REQUEST        ((uint32_t)USART_RQR_RXFRQ)        /*!< Receive Data flush Request */ 
+#define USART_TXDATA_FLUSH_REQUEST        ((uint32_t)USART_RQR_TXFRQ)        /*!< Transmit data flush Request */
+/**
+  * @}
+  */
+
+/** @defgroup USART_Flags      USART Flags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the ISR register
+  * @{
+  */
+#define USART_FLAG_REACK                     ((uint32_t)0x00400000)
+#define USART_FLAG_TEACK                     ((uint32_t)0x00200000)  
+#define USART_FLAG_BUSY                      ((uint32_t)0x00010000)
+#define USART_FLAG_CTS                       ((uint32_t)0x00000400)
+#define USART_FLAG_CTSIF                     ((uint32_t)0x00000200)
+#define USART_FLAG_LBDF                      ((uint32_t)0x00000100)
+#define USART_FLAG_TXE                       ((uint32_t)0x00000080)
+#define USART_FLAG_TC                        ((uint32_t)0x00000040)
+#define USART_FLAG_RXNE                      ((uint32_t)0x00000020)
+#define USART_FLAG_IDLE                      ((uint32_t)0x00000010)
+#define USART_FLAG_ORE                       ((uint32_t)0x00000008)
+#define USART_FLAG_NE                        ((uint32_t)0x00000004)
+#define USART_FLAG_FE                        ((uint32_t)0x00000002)
+#define USART_FLAG_PE                        ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup USART_Interrupt_definition USART Interrupts Definition
+  *        Elements values convention: 0000ZZZZ0XXYYYYYb
+  *           - YYYYY  : Interrupt source position in the XX register (5bits)
+  *           - XX  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR2 register
+  *                 - 11: CR3 register
+  *           - ZZZZ  : Flag position in the ISR register(4bits)
+  * @{
+  */
+
+#define USART_IT_PE                          ((uint16_t)0x0028)
+#define USART_IT_TXE                         ((uint16_t)0x0727)
+#define USART_IT_TC                          ((uint16_t)0x0626)
+#define USART_IT_RXNE                        ((uint16_t)0x0525)
+#define USART_IT_IDLE                        ((uint16_t)0x0424)
+#define USART_IT_ERR                         ((uint16_t)0x0060)
+
+#define USART_IT_ORE                         ((uint16_t)0x0300)
+#define USART_IT_NE                          ((uint16_t)0x0200)
+#define USART_IT_FE                          ((uint16_t)0x0100)
+/**
+  * @}
+  */
+
+/** @defgroup USART_IT_CLEAR_Flags    USART Interruption Clear Flags
+  * @{
+  */
+#define USART_CLEAR_PEF                       USART_ICR_PECF            /*!< Parity Error Clear Flag */
+#define USART_CLEAR_FEF                       USART_ICR_FECF            /*!< Framing Error Clear Flag */
+#define USART_CLEAR_NEF                       USART_ICR_NCF             /*!< Noise detected Clear Flag */
+#define USART_CLEAR_OREF                      USART_ICR_ORECF           /*!< OverRun Error Clear Flag */
+#define USART_CLEAR_IDLEF                     USART_ICR_IDLECF          /*!< IDLE line detected Clear Flag */
+#define USART_CLEAR_TCF                       USART_ICR_TCCF            /*!< Transmission Complete Clear Flag */
+#define USART_CLEAR_CTSF                      USART_ICR_CTSCF           /*!< CTS Interrupt Clear Flag */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup USART_Exported_Macros USART Exported Macros
+  * @{
+  */
+
+/** @brief Reset USART handle state
+  * @param  __HANDLE__: USART handle.
+  * @retval None
+  */
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__)  ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+
+/** @brief  Checks whether the specified USART flag is set or not.
+  * @param  __HANDLE__: specifies the USART Handle
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg USART_FLAG_REACK: Receive enable acknowledge flag
+  *            @arg USART_FLAG_TEACK: Transmit enable acknowledge flag
+  *            @arg USART_FLAG_BUSY:  Busy flag
+  *            @arg USART_FLAG_CTS:   CTS Change flag
+  *            @arg USART_FLAG_TXE:   Transmit data register empty flag
+  *            @arg USART_FLAG_TC:    Transmission Complete flag
+  *            @arg USART_FLAG_RXNE:  Receive data register not empty flag
+  *            @arg USART_FLAG_IDLE:  Idle Line detection flag
+  *            @arg USART_FLAG_ORE:   OverRun Error flag
+  *            @arg USART_FLAG_NE:    Noise Error flag
+  *            @arg USART_FLAG_FE:    Framing Error flag
+  *            @arg USART_FLAG_PE:    Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief  Enables the specified USART interrupt.
+  * @param  __HANDLE__: specifies the USART Handle
+  * @param  __INTERRUPT__: specifies the USART interrupt source to enable.
+  *          This parameter can be one of the following values:
+  *            @arg USART_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg USART_IT_TC:   Transmission complete interrupt
+  *            @arg USART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg USART_IT_IDLE: Idle line detection interrupt
+  *            @arg USART_IT_PE:   Parity Error interrupt
+  *            @arg USART_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__)   (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+                                                            ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+                                                            ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+/** @brief  Disables the specified USART interrupt.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __INTERRUPT__: specifies the USART interrupt source to disable.
+  *          This parameter can be one of the following values:
+  *            @arg USART_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg USART_IT_TC:   Transmission complete interrupt
+  *            @arg USART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg USART_IT_IDLE: Idle line detection interrupt
+  *            @arg USART_IT_PE:   Parity Error interrupt
+  *            @arg USART_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__)  (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+                                                            ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+                                                            ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+
+/** @brief  Checks whether the specified USART interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the USART Handle
+  * @param  __IT__: specifies the USART interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg USART_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg USART_IT_TC:  Transmission complete interrupt
+  *            @arg USART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg USART_IT_IDLE: Idle line detection interrupt
+  *            @arg USART_IT_ORE: OverRun Error interrupt
+  *            @arg USART_IT_NE: Noise Error interrupt
+  *            @arg USART_IT_FE: Framing Error interrupt
+  *            @arg USART_IT_PE: Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_USART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief  Checks whether the specified USART interrupt source is enabled.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __IT__: specifies the USART interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg USART_IT_TXE: Transmit Data Register empty interrupt
+  *            @arg USART_IT_TC:  Transmission complete interrupt
+  *            @arg USART_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg USART_IT_IDLE: Idle line detection interrupt
+  *            @arg USART_IT_ORE: OverRun Error interrupt
+  *            @arg USART_IT_NE: Noise Error interrupt
+  *            @arg USART_IT_FE: Framing Error interrupt
+  *            @arg USART_IT_PE: Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \
+                                                   (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << \
+                                                   (((uint16_t)(__IT__)) & USART_IT_MASK)))
+
+
+/** @brief  Clears the specified USART ISR flag, in setting the proper ICR register flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+  *                       to clear the corresponding interrupt
+  *          This parameter can be one of the following values:
+  *            @arg USART_CLEAR_PEF: Parity Error Clear Flag
+  *            @arg USART_CLEAR_FEF: Framing Error Clear Flag
+  *            @arg USART_CLEAR_NEF: Noise detected Clear Flag
+  *            @arg USART_CLEAR_OREF: OverRun Error Clear Flag
+  *            @arg USART_CLEAR_IDLEF: IDLE line detected Clear Flag
+  *            @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
+  *            @arg USART_CLEAR_CTSF: CTS Interrupt Clear Flag
+  * @retval None
+  */
+#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief  Set a specific USART request flag.
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @param  __REQ__: specifies the request flag to set
+  *          This parameter can be one of the following values:
+  *            @arg USART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+  *            @arg USART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+  *
+  * @retval None
+  */
+#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) 
+
+/** @brief  Enable USART
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @retval None
+  */
+#define __HAL_USART_ENABLE(__HANDLE__)                 ((__HANDLE__)->Instance->CR1 |=  USART_CR1_UE)
+
+/** @brief  Disable USART
+  * @param  __HANDLE__: specifies the USART Handle.
+  * @retval None
+  */
+#define __HAL_USART_DISABLE(__HANDLE__)                ((__HANDLE__)->Instance->CR1 &=  ~USART_CR1_UE)
+
+/**
+  * @}
+  */
+/* Include UART HAL Extension module */
+#include "stm32f7xx_hal_usart_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USART_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup USART_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_CheckIdleState(USART_HandleTypeDef *husart);
+/**
+  * @}
+  */
+
+/** @addtogroup USART_Exported_Functions_Group2
+  * @{
+  */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData,  uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+
+/**
+  * @}
+  */ 
+
+/** @addtogroup USART_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  ************************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t               HAL_USART_GetError(USART_HandleTypeDef *husart);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup USART_Private_Constants USART Private Constants
+  * @{
+  */
+/** @brief USART interruptions flag mask
+  * 
+  */ 
+#define USART_IT_MASK                             ((uint16_t)0x001F)
+
+/**
+  * @}
+  */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup USART_Private_Macros USART Private Macros
+  * @{
+  */
+/** @brief  Reports the USART clock source.
+  * @param  __HANDLE__: specifies the USART Handle
+  * @param  __CLOCKSOURCE__ : output variable
+  * @retval the USART clocking source, written in __CLOCKSOURCE__.
+  */
+#define USART_GETCLOCKSOURCE(__HANDLE__, __CLOCKSOURCE__)\
+  do {                                                         \
+    if((__HANDLE__)->Instance == USART1)                       \
+    {                                                          \
+       switch(__HAL_RCC_GET_USART1_SOURCE())                   \
+       {                                                       \
+        case RCC_USART1CLKSOURCE_PCLK2:                        \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK2;         \
+          break;                                               \
+        case RCC_USART1CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI;           \
+          break;                                               \
+        case RCC_USART1CLKSOURCE_SYSCLK:                       \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK;        \
+          break;                                               \
+        case RCC_USART1CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE;           \
+          break;                                               \
+        default:                                               \
+          break;                                               \
+       }                                                       \
+    }                                                          \
+    else if((__HANDLE__)->Instance == USART2)                  \
+    {                                                          \
+       switch(__HAL_RCC_GET_USART2_SOURCE())                   \
+       {                                                       \
+        case RCC_USART2CLKSOURCE_PCLK1:                        \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1;         \
+          break;                                               \
+        case RCC_USART2CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI;           \
+          break;                                               \
+        case RCC_USART2CLKSOURCE_SYSCLK:                       \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK;        \
+          break;                                               \
+        case RCC_USART2CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE;           \
+          break;                                               \
+        default:                                               \
+          break;                                               \
+       }                                                       \
+    }                                                          \
+    else if((__HANDLE__)->Instance == USART3)                  \
+    {                                                          \
+       switch(__HAL_RCC_GET_USART3_SOURCE())                   \
+       {                                                       \
+        case RCC_USART3CLKSOURCE_PCLK1:                        \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1;         \
+          break;                                               \
+        case RCC_USART3CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI;           \
+          break;                                               \
+        case RCC_USART3CLKSOURCE_SYSCLK:                       \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK;        \
+          break;                                               \
+        case RCC_USART3CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE;           \
+          break;                                               \
+        default:                                               \
+          break;                                               \
+       }                                                       \
+    }                                                          \
+    else if((__HANDLE__)->Instance == USART6)                  \
+    {                                                          \
+       switch(__HAL_RCC_GET_USART6_SOURCE())                   \
+       {                                                       \
+        case RCC_USART6CLKSOURCE_PCLK2:                        \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK2;         \
+          break;                                               \
+        case RCC_USART6CLKSOURCE_HSI:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI;           \
+          break;                                               \
+        case RCC_USART6CLKSOURCE_SYSCLK:                       \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK;        \
+          break;                                               \
+        case RCC_USART6CLKSOURCE_LSE:                          \
+          (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE;           \
+          break;                                               \
+        default:                                               \
+          break;                                               \
+       }                                                       \
+    }                                                          \
+ } while(0)
+  
+
+#define IS_USART_STOPBITS(__STOPBITS__) (((__STOPBITS__) == USART_STOPBITS_1) || \
+                                         ((__STOPBITS__) == USART_STOPBITS_1_5) || \
+                                         ((__STOPBITS__) == USART_STOPBITS_2))
+#define IS_USART_PARITY(__PARITY__) (((__PARITY__) == USART_PARITY_NONE) || \
+                                     ((__PARITY__) == USART_PARITY_EVEN) || \
+                                     ((__PARITY__) == USART_PARITY_ODD))
+#define IS_USART_MODE(__MODE__) ((((__MODE__) & (uint32_t)0xFFFFFFF3) == 0x00) && ((__MODE__) != (uint32_t)0x00))
+#define IS_USART_OVERSAMPLING(__SAMPLING__) (((__SAMPLING__) == USART_OVERSAMPLING_16) || \
+                                             ((__SAMPLING__) == USART_OVERSAMPLING_8))
+#define IS_USART_CLOCK(__CLOCK__)     (((__CLOCK__)== USART_CLOCK_DISABLE) || \
+                                       ((__CLOCK__)== USART_CLOCK_ENABLE))
+#define IS_USART_POLARITY(__CPOL__) (((__CPOL__) == USART_POLARITY_LOW) || ((__CPOL__) == USART_POLARITY_HIGH))
+#define IS_USART_PHASE(__CPHA__) (((__CPHA__) == USART_PHASE_1EDGE) || ((__CPHA__) == USART_PHASE_2EDGE))
+#define IS_USART_LASTBIT(__LASTBIT__) (((__LASTBIT__) == USART_LASTBIT_DISABLE) || \
+                                       ((__LASTBIT__) == USART_LASTBIT_ENABLE))
+#define IS_USART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == USART_RXDATA_FLUSH_REQUEST) || \
+                                               ((__PARAM__) == USART_TXDATA_FLUSH_REQUEST))   
+#define IS_USART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 9000001)
+
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup USART_Private_Functions USART Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_usart_ex.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,158 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_usart_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of USART HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_USART_EX_H
+#define __STM32F7xx_HAL_USART_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup USARTEx
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USARTEx_Exported_Constants USARTEx Exported Constants
+  * @{
+  */
+
+/** @defgroup USARTEx_Word_Length USARTEx Word Length
+  * @{
+  */
+#define USART_WORDLENGTH_7B                  ((uint32_t)USART_CR1_M_1)
+#define USART_WORDLENGTH_8B                  ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M_0)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup USARTEx_Private_Macros USARTEx Private Macros
+  * @{
+  */
+
+/** @brief  Computes the USART mask to apply to retrieve the received data
+  *         according to the word length and to the parity bits activation.
+  *         If PCE = 1, the parity bit is not included in the data extracted
+  *         by the reception API().
+  *         This masking operation is not carried out in the case of
+  *         DMA transfers.
+  * @param  __HANDLE__: specifies the USART Handle
+  * @retval none
+  */
+#define __HAL_USART_MASK_COMPUTATION(__HANDLE__)                      \
+  do {                                                                \
+  if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B)           \
+  {                                                                   \
+     if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE)              \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x01FF ;                                 \
+     }                                                                \
+     else                                                             \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x00FF ;                                 \
+     }                                                                \
+  }                                                                   \
+  else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B)      \
+  {                                                                   \
+     if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE)              \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x00FF ;                                 \
+     }                                                                \
+     else                                                             \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x007F ;                                 \
+     }                                                                \
+  }                                                                   \
+  else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_7B)      \
+  {                                                                   \
+     if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE)              \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x007F ;                                 \
+     }                                                                \
+     else                                                             \
+     {                                                                \
+        (__HANDLE__)->Mask = 0x003F ;                                 \
+     }                                                                \
+  }                                                                   \
+} while(0)
+
+#define IS_USART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == USART_WORDLENGTH_7B) || \
+                                          ((__LENGTH__) == USART_WORDLENGTH_8B) || \
+                                          ((__LENGTH__) == USART_WORDLENGTH_9B))                                 
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization methods  **********************************/
+/* IO operation methods *******************************************************/
+/* Peripheral Control methods  ************************************************/
+/* Peripheral State methods  **************************************************/
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_USART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_wwdg.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,463 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_wwdg.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   WWDG HAL module driver.
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Window Watchdog (WWDG) peripheral:
+  *           + Initialization and de-initialization functions
+  *           + IO operation functions
+  *           + Peripheral State functions       
+  @verbatim
+  ==============================================================================
+                      ##### WWDG specific features #####
+  ==============================================================================
+  [..] 
+    Once enabled the WWDG generates a system reset on expiry of a programmed
+    time period, unless the program refreshes the counter (down-counter) 
+    before reaching 0x3F value (i.e. a reset is generated when the counter
+    value rolls over from 0x40 to 0x3F). 
+       
+    (+) An MCU reset is also generated if the counter value is refreshed
+        before the counter has reached the refresh window value. This 
+        implies that the counter must be refreshed in a limited window.
+    (+) Once enabled the WWDG cannot be disabled except by a system reset.
+    (+) WWDGRST flag in RCC_CSR register can be used to inform when a WWDG
+        reset occurs.               
+    (+) The WWDG counter input clock is derived from the APB clock divided 
+        by a programmable prescaler.
+    (+) WWDG clock (Hz) = PCLK1 / (4096 * Prescaler)
+    (+) WWDG timeout (mS) = 1000 * Counter / WWDG clock
+    (+) WWDG Counter refresh is allowed between the following limits :
+        (++) min time (mS) = 1000 * (Counter - Window) / WWDG clock
+        (++) max time (mS) = 1000 * (Counter - 0x40) / WWDG clock
+    
+    (+) Min-max timeout value at 50 MHz(PCLK1): 81.9 us / 41.9 ms 
+
+
+                     ##### How to use this driver #####
+  ==============================================================================
+  [..]
+    (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE().
+    (+) Set the WWDG prescaler, refresh window and counter value 
+        using HAL_WWDG_Init() function.
+    (+) Start the WWDG using HAL_WWDG_Start() function.
+        When the WWDG is enabled the counter value should be configured to 
+        a value greater than 0x40 to prevent generating an immediate reset.
+    (+) Optionally you can enable the Early Wakeup Interrupt (EWI) which is 
+        generated when the counter reaches 0x40, and then start the WWDG using
+        HAL_WWDG_Start_IT(). At EWI HAL_WWDG_WakeupCallback is executed and user can 
+        add his own code by customization of function pointer HAL_WWDG_WakeupCallback
+        Once enabled, EWI interrupt cannot be disabled except by a system reset.          
+    (+) Then the application program must refresh the WWDG counter at regular
+        intervals during normal operation to prevent an MCU reset, using
+        HAL_WWDG_Refresh() function. This operation must occur only when
+        the counter is lower than the refresh window value already programmed.
+        
+     *** WWDG HAL driver macros list ***
+     ==================================
+     [..]
+       Below the list of most used macros in WWDG HAL driver.
+       
+      (+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral 
+      (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status
+      (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags 
+      (+) __HAL_WWDG_ENABLE_IT:  Enables the WWDG early wake-up interrupt 
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup WWDG WWDG
+  * @brief WWDG HAL module driver.
+  * @{
+  */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Functions WWDG Exported Functions
+  * @{
+  */
+
+/** @defgroup WWDG_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions. 
+ *
+@verbatim    
+  ==============================================================================
+          ##### Initialization and de-initialization functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to:
+    (+) Initialize the WWDG according to the specified parameters 
+        in the WWDG_InitTypeDef and create the associated handle
+    (+) DeInitialize the WWDG peripheral
+    (+) Initialize the WWDG MSP
+    (+) DeInitialize the WWDG MSP 
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the WWDG according to the specified
+  *         parameters in the WWDG_InitTypeDef and creates the associated handle.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg)
+{
+  /* Check the WWDG handle allocation */
+  if(hwwdg == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
+  assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler));
+  assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window)); 
+  assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter)); 
+  
+  if(hwwdg->State == HAL_WWDG_STATE_RESET)
+  {
+    /* Allocate lock resource and initialize it */
+    hwwdg->Lock = HAL_UNLOCKED;
+    /* Init the low level hardware */
+    HAL_WWDG_MspInit(hwwdg);
+  }
+  
+  /* Change WWDG peripheral state */
+  hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+  /* Set WWDG Prescaler and Window */
+  MODIFY_REG(hwwdg->Instance->CFR, (WWDG_CFR_WDGTB | WWDG_CFR_W), (hwwdg->Init.Prescaler | hwwdg->Init.Window));
+  /* Set WWDG Counter */
+  MODIFY_REG(hwwdg->Instance->CR, WWDG_CR_T, hwwdg->Init.Counter);
+
+  /* Change WWDG peripheral state */
+  hwwdg->State = HAL_WWDG_STATE_READY;
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the WWDG peripheral. 
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg)
+{ 
+  /* Check the WWDG handle allocation */
+  if(hwwdg == NULL)
+  {
+    return HAL_ERROR;
+  }
+
+  /* Check the parameters */
+  assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
+
+  /* Change WWDG peripheral state */  
+  hwwdg->State = HAL_WWDG_STATE_BUSY;
+  
+  /* DeInit the low level hardware */
+  HAL_WWDG_MspDeInit(hwwdg);
+  
+  /* Reset WWDG Control register */
+  hwwdg->Instance->CR  = (uint32_t)0x0000007F;
+  
+  /* Reset WWDG Configuration register */
+  hwwdg->Instance->CFR = (uint32_t)0x0000007F;
+  
+  /* Reset WWDG Status register */
+  hwwdg->Instance->SR  = 0; 
+  
+  /* Change WWDG peripheral state */    
+  hwwdg->State = HAL_WWDG_STATE_RESET; 
+
+  /* Release Lock */
+  __HAL_UNLOCK(hwwdg);
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the WWDG MSP.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval None
+  */
+__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hwwdg);
+ 
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_WWDG_MspInit could be implemented in the user file
+   */
+}
+
+/**
+  * @brief  DeInitializes the WWDG MSP.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval None
+  */
+__weak void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hwwdg);
+ 
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_WWDG_MspDeInit could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions 
+ *  @brief    IO operation functions 
+ *
+@verbatim   
+  ==============================================================================
+                       ##### IO operation functions #####
+  ==============================================================================  
+  [..]  
+    This section provides functions allowing to:
+    (+) Start the WWDG.
+    (+) Refresh the WWDG.
+    (+) Handle WWDG interrupt request. 
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Starts the WWDG.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg)
+{
+  /* Process Locked */
+  __HAL_LOCK(hwwdg); 
+  
+  /* Change WWDG peripheral state */  
+  hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+  /* Enable the peripheral */
+  __HAL_WWDG_ENABLE(hwwdg);  
+  
+  /* Change WWDG peripheral state */    
+  hwwdg->State = HAL_WWDG_STATE_READY; 
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hwwdg);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Starts the WWDG with interrupt enabled.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg)
+{
+  /* Process Locked */
+  __HAL_LOCK(hwwdg); 
+
+  /* Change WWDG peripheral state */  
+  hwwdg->State = HAL_WWDG_STATE_BUSY;
+
+  /* Enable the Early Wakeup Interrupt */ 
+  __HAL_WWDG_ENABLE_IT(hwwdg, WWDG_IT_EWI);
+
+  /* Enable the peripheral */
+  __HAL_WWDG_ENABLE(hwwdg);  
+
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Refreshes the WWDG.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @param  Counter: value of counter to put in WWDG counter
+  * @retval HAL status
+  */
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter)
+{
+  /* Process Locked */
+  __HAL_LOCK(hwwdg); 
+  
+  /* Change WWDG peripheral state */  
+  hwwdg->State = HAL_WWDG_STATE_BUSY;
+  
+  /* Check the parameters */
+  assert_param(IS_WWDG_COUNTER(Counter));
+  
+  /* Write to WWDG CR the WWDG Counter value to refresh with */
+  MODIFY_REG(hwwdg->Instance->CR, (uint32_t)WWDG_CR_T, Counter);
+  
+  /* Change WWDG peripheral state */    
+  hwwdg->State = HAL_WWDG_STATE_READY; 
+  
+  /* Process Unlocked */
+  __HAL_UNLOCK(hwwdg);
+  
+  /* Return function status */
+  return HAL_OK;
+}
+
+/**
+  * @brief  Handles WWDG interrupt request.
+  * @note   The Early Wakeup Interrupt (EWI) can be used if specific safety operations 
+  *         or data logging must be performed before the actual reset is generated. 
+  *         The EWI interrupt is enabled using __HAL_WWDG_ENABLE_IT() macro.
+  *         When the downcounter reaches the value 0x40, and EWI interrupt is 
+  *         generated and the corresponding Interrupt Service Routine (ISR) can 
+  *         be used to trigger specific actions (such as communications or data 
+  *         logging), before resetting the device. 
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval None
+  */
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg)
+{ 
+  /* Check if Early Wakeup Interrupt is enable */
+  if(__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET)
+  {
+    /* Check if WWDG Early Wakeup Interrupt occurred */
+    if(__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET)
+    {
+      /* Early Wakeup callback */ 
+      HAL_WWDG_WakeupCallback(hwwdg);
+      
+      /* Change WWDG peripheral state */
+      hwwdg->State = HAL_WWDG_STATE_READY; 
+      
+      /* Clear the WWDG Early Wakeup flag */
+      __HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF);
+      
+      /* Process Unlocked */
+      __HAL_UNLOCK(hwwdg);
+    }
+  }
+} 
+
+/**
+  * @brief  Early Wakeup WWDG callback.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval None
+  */
+__weak void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg)
+{
+  /* Prevent unused argument(s) compilation warning */
+  UNUSED(hwwdg);
+ 
+  /* NOTE: This function Should not be modified, when the callback is needed,
+           the HAL_WWDG_WakeupCallback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Exported_Functions_Group3 Peripheral State functions 
+ *  @brief    Peripheral State functions. 
+ *
+@verbatim   
+  ==============================================================================
+                        ##### Peripheral State functions #####
+  ==============================================================================  
+  [..]
+    This subsection permits to get in run-time the status of the peripheral 
+    and the data flow.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Returns the WWDG state.
+  * @param  hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
+  *              the configuration information for the specified WWDG module.
+  * @retval HAL state
+  */
+HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg)
+{
+  return hwwdg->State;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_WWDG_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_wwdg.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,337 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_wwdg.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of WWDG HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_WWDG_H
+#define __STM32F7xx_HAL_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup WWDG
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Types WWDG Exported Types
+  * @{
+  */
+   
+/**
+  * @brief  WWDG HAL State Structure definition
+  */
+typedef enum
+{
+  HAL_WWDG_STATE_RESET     = 0x00,  /*!< WWDG not yet initialized or disabled */
+  HAL_WWDG_STATE_READY     = 0x01,  /*!< WWDG initialized and ready for use   */
+  HAL_WWDG_STATE_BUSY      = 0x02,  /*!< WWDG internal process is ongoing     */
+  HAL_WWDG_STATE_TIMEOUT   = 0x03,  /*!< WWDG timeout state                   */
+  HAL_WWDG_STATE_ERROR     = 0x04   /*!< WWDG error state                     */
+}HAL_WWDG_StateTypeDef;
+
+/** 
+  * @brief  WWDG Init structure definition  
+  */ 
+typedef struct
+{
+  uint32_t Prescaler;  /*!< Specifies the prescaler value of the WWDG.
+                            This parameter can be a value of @ref WWDG_Prescaler */
+  
+  uint32_t Window;     /*!< Specifies the WWDG window value to be compared to the downcounter.
+                            This parameter must be a number lower than Max_Data = 0x80 */ 
+  
+  uint32_t Counter;    /*!< Specifies the WWDG free-running downcounter value.
+                            This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+
+}WWDG_InitTypeDef;
+
+/** 
+  * @brief  WWDG handle Structure definition  
+  */ 
+typedef struct
+{
+  WWDG_TypeDef                 *Instance;  /*!< Register base address    */
+  
+  WWDG_InitTypeDef             Init;       /*!< WWDG required parameters */
+  
+  HAL_LockTypeDef              Lock;       /*!< WWDG locking object      */
+  
+  __IO HAL_WWDG_StateTypeDef   State;      /*!< WWDG communication state */
+  
+}WWDG_HandleTypeDef;
+/**
+  * @}
+  */ 
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Constants WWDG Exported Constants
+  * @{
+  */
+
+/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
+  * @{
+  */ 
+#define WWDG_IT_EWI                       WWDG_CFR_EWI  /*!< Early wakeup interrupt */
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Flag_definition WWDG Flag definition
+  * @brief WWDG Flag definition
+  * @{
+  */ 
+#define WWDG_FLAG_EWIF                    WWDG_SR_EWIF  /*!< Early wakeup interrupt flag */
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Prescaler WWDG Prescaler
+  * @{
+  */ 
+#define WWDG_PRESCALER_1                 ((uint32_t)0x00000000)  /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2                  WWDG_CFR_WDGTB_0  /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4                  WWDG_CFR_WDGTB_1  /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8                  WWDG_CFR_WDGTB  /*!< WWDG counter clock = (PCLK1/4096)/8 */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Macros WWDG Exported Macros
+  * @{
+  */
+
+/** @brief Reset WWDG handle state
+  * @param  __HANDLE__: WWDG handle
+  * @retval None
+  */
+#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
+
+/**
+  * @brief  Enables the WWDG peripheral.
+  * @param  __HANDLE__: WWDG handle
+  * @retval None
+  */
+#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
+
+/**
+  * @brief  Disables the WWDG peripheral.
+  * @param  __HANDLE__: WWDG handle
+  * @note   WARNING: This is a dummy macro for HAL code alignment.
+  *         Once enable, WWDG Peripheral cannot be disabled except by a system reset.
+  * @retval None
+  */
+#define __HAL_WWDG_DISABLE(__HANDLE__)                      /* dummy  macro */
+
+/**
+  * @brief  Gets the selected WWDG's it status.
+  * @param  __HANDLE__: WWDG handle
+  * @param  __INTERRUPT__: specifies the it to check.
+  *        This parameter can be one of the following values:
+  *            @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
+  * @retval The new state of WWDG_FLAG (SET or RESET).
+  */
+#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__)       __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__))
+
+/** @brief  Clear the WWDG's interrupt pending bits
+  *         bits to clear the selected interrupt pending bits.
+  * @param  __HANDLE__: WWDG handle
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear.
+  *         This parameter can be one of the following values:
+  *            @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+  */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__)     __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
+
+/**
+  * @brief  Enables the WWDG early wakeup interrupt.
+  * @param  __HANDLE__: WWDG handle
+  * @param  __INTERRUPT__: specifies the interrupt to enable.
+  *         This parameter can be one of the following values:
+  *            @arg WWDG_IT_EWI: Early wakeup interrupt
+  * @note   Once enabled this interrupt cannot be disabled except by a system reset.
+  * @retval None
+  */
+#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__))
+    
+/**
+  * @brief  Disables the WWDG early wakeup interrupt.
+  * @param  __HANDLE__: WWDG handle
+  * @param  __INTERRUPT__: specifies the interrupt to disable.
+  *         This parameter can be one of the following values:
+  *            @arg WWDG_IT_EWI: Early wakeup interrupt
+  * @note   WARNING: This is a dummy macro for HAL code alignment. 
+  *         Once enabled this interrupt cannot be disabled except by a system reset.
+  * @retval None
+  */
+#define __HAL_WWDG_DISABLE_IT(__HANDLE__, __INTERRUPT__)                   /* dummy  macro */
+    
+/**
+  * @brief  Gets the selected WWDG's flag status.
+  * @param  __HANDLE__: WWDG handle
+  * @param  __FLAG__: specifies the flag to check.
+  *         This parameter can be one of the following values:
+  *            @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+  * @retval The new state of WWDG_FLAG (SET or RESET).
+  */
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clears the WWDG's pending flags.
+  * @param  __HANDLE__: WWDG handle
+  * @param  __FLAG__: specifies the flag to clear.
+  *         This parameter can be one of the following values:
+  *            @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+  * @retval None
+  */
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/** @brief  Checks if the specified WWDG interrupt source is enabled or disabled.
+  * @param  __HANDLE__: WWDG Handle.
+  * @param  __INTERRUPT__: specifies the WWDG interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg WWDG_IT_EWI: Early Wakeup Interrupt
+  * @retval state of __INTERRUPT__ (TRUE or FALSE).
+  */
+#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup WWDG_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup WWDG_Exported_Functions_Group1
+  * @{
+  */
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg);
+/**
+  * @}
+  */
+
+/** @addtogroup WWDG_Exported_Functions_Group2
+  * @{
+  */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter);
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
+/**
+  * @}
+  */
+
+/** @addtogroup WWDG_Exported_Functions_Group3
+  * @{
+  */
+/* Peripheral State functions  **************************************************/
+HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup WWDG_Private_Constants WWDG Private Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup WWDG_Private_Macros WWDG Private Macros
+  * @{
+  */
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+                                          ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+                                          ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+                                          ((__PRESCALER__) == WWDG_PRESCALER_8))
+#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
+/**
+  * @}
+  */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup WWDG_Private_Functions WWDG Private Functions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_ll_fmc.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1121 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_ll_fmc.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   FMC Low Layer HAL module driver.
+  *    
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the Flexible Memory Controller (FMC) peripheral memories:
+  *           + Initialization/de-initialization functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State functions
+  *         
+  @verbatim
+  ==============================================================================
+                        ##### FMC peripheral features #####
+  ==============================================================================
+  [..] The Flexible memory controller (FMC) includes three memory controllers:
+       (+) The NOR/PSRAM memory controller
+       (+) The NAND memory controller
+       (+) The Synchronous DRAM (SDRAM) controller 
+       
+  [..] The FMC functional block makes the interface with synchronous and asynchronous static
+       memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are:
+       (+) to translate AHB transactions into the appropriate external device protocol
+       (+) to meet the access time requirements of the external memory devices
+   
+  [..] All external memories share the addresses, data and control signals with the controller.
+       Each external device is accessed by means of a unique Chip Select. The FMC performs
+       only one access at a time to an external device.
+       The main features of the FMC controller are the following:
+        (+) Interface with static-memory mapped devices including:
+           (++) Static random access memory (SRAM)
+           (++) Read-only memory (ROM)
+           (++) NOR Flash memory/OneNAND Flash memory
+           (++) PSRAM (4 memory banks)
+           (++) 16-bit PC Card compatible devices
+           (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
+                data
+        (+) Interface with synchronous DRAM (SDRAM) memories
+        (+) Independent Chip Select control for each memory bank
+        (+) Independent configuration for each memory bank
+                    
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup FMC_LL  FMC Low Layer
+  * @brief FMC driver modules
+  * @{
+  */
+
+#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_SDRAM_MODULE_ENABLED)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup FMC_LL_Exported_Functions FMC Low Layer Exported Functions
+  * @{
+  */
+
+/** @defgroup FMC_LL_Exported_Functions_NORSRAM FMC Low Layer NOR SRAM Exported Functions
+  * @brief  NORSRAM Controller functions 
+  *
+  @verbatim 
+  ==============================================================================   
+                   ##### How to use NORSRAM device driver #####
+  ==============================================================================
+ 
+  [..] 
+    This driver contains a set of APIs to interface with the FMC NORSRAM banks in order
+    to run the NORSRAM external devices.
+      
+    (+) FMC NORSRAM bank reset using the function FMC_NORSRAM_DeInit() 
+    (+) FMC NORSRAM bank control configuration using the function FMC_NORSRAM_Init()
+    (+) FMC NORSRAM bank timing configuration using the function FMC_NORSRAM_Timing_Init()
+    (+) FMC NORSRAM bank extended timing configuration using the function 
+        FMC_NORSRAM_Extended_Timing_Init()
+    (+) FMC NORSRAM bank enable/disable write operation using the functions
+        FMC_NORSRAM_WriteOperation_Enable()/FMC_NORSRAM_WriteOperation_Disable()
+        
+
+@endverbatim
+  * @{
+  */
+       
+/** @defgroup FMC_LL_NORSRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @brief    Initialization and Configuration functions 
+  *
+  @verbatim    
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to:
+    (+) Initialize and configure the FMC NORSRAM interface
+    (+) De-initialize the FMC NORSRAM interface 
+    (+) Configure the FMC clock and associated GPIOs    
+ 
+@endverbatim
+  * @{
+  */
+  
+/**
+  * @brief  Initialize the FMC_NORSRAM device according to the specified
+  *         control parameters in the FMC_NORSRAM_InitTypeDef
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Init: Pointer to NORSRAM Initialization structure   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef* Init)
+{ 
+  uint32_t tmpr = 0;
+    
+  /* Check the parameters */
+  assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FMC_NORSRAM_BANK(Init->NSBank));
+  assert_param(IS_FMC_MUX(Init->DataAddressMux));
+  assert_param(IS_FMC_MEMORY(Init->MemoryType));
+  assert_param(IS_FMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
+  assert_param(IS_FMC_BURSTMODE(Init->BurstAccessMode));
+  assert_param(IS_FMC_WAIT_POLARITY(Init->WaitSignalPolarity));
+  assert_param(IS_FMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
+  assert_param(IS_FMC_WRITE_OPERATION(Init->WriteOperation));
+  assert_param(IS_FMC_WAITE_SIGNAL(Init->WaitSignal));
+  assert_param(IS_FMC_EXTENDED_MODE(Init->ExtendedMode));
+  assert_param(IS_FMC_ASYNWAIT(Init->AsynchronousWait));
+  assert_param(IS_FMC_WRITE_BURST(Init->WriteBurst));
+  assert_param(IS_FMC_CONTINOUS_CLOCK(Init->ContinuousClock)); 
+  assert_param(IS_FMC_WRITE_FIFO(Init->WriteFifo));
+  assert_param(IS_FMC_PAGESIZE(Init->PageSize));
+
+  /* Get the BTCR register value */
+  tmpr = Device->BTCR[Init->NSBank];
+  
+  /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WAITCFG, WREN,
+           WAITEN, EXTMOD, ASYNCWAIT, CBURSTRW and CCLKEN bits */
+  tmpr &= ((uint32_t)~(FMC_BCR1_MBKEN     | FMC_BCR1_MUXEN    | FMC_BCR1_MTYP     | \
+                       FMC_BCR1_MWID      | FMC_BCR1_FACCEN   | FMC_BCR1_BURSTEN  | \
+                       FMC_BCR1_WAITPOL   | FMC_BCR1_CPSIZE    | FMC_BCR1_WAITCFG  | \
+                       FMC_BCR1_WREN      | FMC_BCR1_WAITEN   | FMC_BCR1_EXTMOD   | \
+                       FMC_BCR1_ASYNCWAIT | FMC_BCR1_CBURSTRW | FMC_BCR1_CCLKEN | FMC_BCR1_WFDIS));
+  
+  /* Set NORSRAM device control parameters */
+  tmpr |= (uint32_t)(Init->DataAddressMux       |\
+                    Init->MemoryType           |\
+                    Init->MemoryDataWidth      |\
+                    Init->BurstAccessMode      |\
+                    Init->WaitSignalPolarity   |\
+                    Init->WaitSignalActive     |\
+                    Init->WriteOperation       |\
+                    Init->WaitSignal           |\
+                    Init->ExtendedMode         |\
+                    Init->AsynchronousWait     |\
+                    Init->WriteBurst           |\
+                    Init->ContinuousClock      |\
+                    Init->PageSize             |\
+                    Init->WriteFifo);
+                    
+  if(Init->MemoryType == FMC_MEMORY_TYPE_NOR)
+  {
+    tmpr |= (uint32_t)FMC_NORSRAM_FLASH_ACCESS_ENABLE;
+  }
+  
+  Device->BTCR[Init->NSBank] = tmpr;
+
+  /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */
+  if((Init->ContinuousClock == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FMC_NORSRAM_BANK1))
+  { 
+    Init->BurstAccessMode = FMC_BURST_ACCESS_MODE_ENABLE; 
+    Device->BTCR[FMC_NORSRAM_BANK1] |= (uint32_t)(Init->BurstAccessMode  |\
+                                                  Init->ContinuousClock);
+  }
+  if(Init->NSBank != FMC_NORSRAM_BANK1)
+  {
+    Device->BTCR[FMC_NORSRAM_BANK1] |= (uint32_t)(Init->WriteFifo);              
+  }
+  
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  DeInitialize the FMC_NORSRAM peripheral 
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  ExDevice: Pointer to NORSRAM extended mode device instance  
+  * @param  Bank: NORSRAM bank number  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
+  assert_param(IS_FMC_NORSRAM_BANK(Bank));
+  
+  /* Disable the FMC_NORSRAM device */
+  __FMC_NORSRAM_DISABLE(Device, Bank);
+  
+  /* De-initialize the FMC_NORSRAM device */
+  /* FMC_NORSRAM_BANK1 */
+  if(Bank == FMC_NORSRAM_BANK1)
+  {
+    Device->BTCR[Bank] = 0x000030DB;    
+  }
+  /* FMC_NORSRAM_BANK2, FMC_NORSRAM_BANK3 or FMC_NORSRAM_BANK4 */
+  else
+  {   
+    Device->BTCR[Bank] = 0x000030D2; 
+  }
+  
+  Device->BTCR[Bank + 1] = 0x0FFFFFFF;
+  ExDevice->BWTR[Bank]   = 0x0FFFFFFF;
+   
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Initialize the FMC_NORSRAM Timing according to the specified
+  *         parameters in the FMC_NORSRAM_TimingTypeDef
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Timing: Pointer to NORSRAM Timing structure
+  * @param  Bank: NORSRAM bank number  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+  assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+  assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime));
+  assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+  assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision));
+  assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency));
+  assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
+  assert_param(IS_FMC_NORSRAM_BANK(Bank));
+  
+  /* Get the BTCR register value */
+  tmpr = Device->BTCR[Bank + 1];
+
+  /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
+  tmpr &= ((uint32_t)~(FMC_BTR1_ADDSET  | FMC_BTR1_ADDHLD | FMC_BTR1_DATAST | \
+                       FMC_BTR1_BUSTURN | FMC_BTR1_CLKDIV | FMC_BTR1_DATLAT | \
+                       FMC_BTR1_ACCMOD));
+  
+  /* Set FMC_NORSRAM device timing parameters */  
+  tmpr |= (uint32_t)(Timing->AddressSetupTime                  |\
+                   ((Timing->AddressHoldTime) << 4)          |\
+                   ((Timing->DataSetupTime) << 8)            |\
+                   ((Timing->BusTurnAroundDuration) << 16)   |\
+                   (((Timing->CLKDivision)-1) << 20)         |\
+                   (((Timing->DataLatency)-2) << 24)         |\
+                    (Timing->AccessMode)
+                    );
+  
+  Device->BTCR[Bank + 1] = tmpr;
+  
+  /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */
+  if(HAL_IS_BIT_SET(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN))
+  {
+    tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1] & ~(((uint32_t)0x0F) << 20)); 
+    tmpr |= (uint32_t)(((Timing->CLKDivision)-1) << 20);
+    Device->BTCR[FMC_NORSRAM_BANK1 + 1] = tmpr;
+  }  
+  
+  return HAL_OK;   
+}
+
+/**
+  * @brief  Initialize the FMC_NORSRAM Extended mode Timing according to the specified
+  *         parameters in the FMC_NORSRAM_TimingTypeDef
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Timing: Pointer to NORSRAM Timing structure
+  * @param  Bank: NORSRAM bank number  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
+{  
+  uint32_t tmpr = 0;
+ 
+  /* Check the parameters */
+  assert_param(IS_FMC_EXTENDED_MODE(ExtendedMode));
+  
+  /* Set NORSRAM device timing register for write configuration, if extended mode is used */
+  if(ExtendedMode == FMC_EXTENDED_MODE_ENABLE)
+  {
+    /* Check the parameters */
+    assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(Device));  
+    assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+    assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+    assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime));
+    assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+    assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision));
+    assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency));
+    assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
+    assert_param(IS_FMC_NORSRAM_BANK(Bank));  
+    
+    /* Get the BWTR register value */
+    tmpr = Device->BWTR[Bank];
+
+    /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
+    tmpr &= ((uint32_t)~(FMC_BWTR1_ADDSET  | FMC_BWTR1_ADDHLD | FMC_BWTR1_DATAST | \
+                         FMC_BWTR1_BUSTURN | FMC_BWTR1_ACCMOD));
+    
+    tmpr |= (uint32_t)(Timing->AddressSetupTime                 |\
+                      ((Timing->AddressHoldTime) << 4)          |\
+                      ((Timing->DataSetupTime) << 8)            |\
+                      ((Timing->BusTurnAroundDuration) << 16)   |\
+                      (Timing->AccessMode));
+
+    Device->BWTR[Bank] = tmpr;
+  }
+  else
+  {
+    Device->BWTR[Bank] = 0x0FFFFFFF;
+  }   
+  
+  return HAL_OK;  
+}
+/**
+  * @}
+  */
+
+/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group2
+ *  @brief   management functions 
+ *
+@verbatim   
+  ==============================================================================
+                      ##### FMC_NORSRAM Control functions #####
+  ==============================================================================  
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the FMC NORSRAM interface.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables dynamically FMC_NORSRAM write operation.
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Bank: NORSRAM bank number   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FMC_NORSRAM_BANK(Bank));
+  
+  /* Enable write operation */
+  Device->BTCR[Bank] |= FMC_WRITE_OPERATION_ENABLE; 
+
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Disables dynamically FMC_NORSRAM write operation.
+  * @param  Device: Pointer to NORSRAM device instance
+  * @param  Bank: NORSRAM bank number   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FMC_NORSRAM_DEVICE(Device));
+  assert_param(IS_FMC_NORSRAM_BANK(Bank));
+    
+  /* Disable write operation */
+  Device->BTCR[Bank] &= ~FMC_WRITE_OPERATION_ENABLE; 
+
+  return HAL_OK;  
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_Exported_Functions_NAND FMC Low Layer NAND Exported Functions
+  * @brief    NAND Controller functions 
+  *
+  @verbatim 
+  ==============================================================================
+                    ##### How to use NAND device driver #####
+  ==============================================================================
+  [..]
+    This driver contains a set of APIs to interface with the FMC NAND banks in order
+    to run the NAND external devices.
+  
+    (+) FMC NAND bank reset using the function FMC_NAND_DeInit() 
+    (+) FMC NAND bank control configuration using the function FMC_NAND_Init()
+    (+) FMC NAND bank common space timing configuration using the function 
+        FMC_NAND_CommonSpace_Timing_Init()
+    (+) FMC NAND bank attribute space timing configuration using the function 
+        FMC_NAND_AttributeSpace_Timing_Init()
+    (+) FMC NAND bank enable/disable ECC correction feature using the functions
+        FMC_NAND_ECC_Enable()/FMC_NAND_ECC_Disable()
+    (+) FMC NAND bank get ECC correction code using the function FMC_NAND_GetECC()    
+
+@endverbatim
+  * @{
+  */
+
+/** @defgroup FMC_LL_NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to:
+    (+) Initialize and configure the FMC NAND interface
+    (+) De-initialize the FMC NAND interface 
+    (+) Configure the FMC clock and associated GPIOs
+        
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the FMC_NAND device according to the specified
+  *         control parameters in the FMC_NAND_HandleTypeDef
+  * @param  Device: Pointer to NAND device instance
+  * @param  Init: Pointer to NAND Initialization structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init)
+{
+  uint32_t tmpr  = 0; 
+    
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_NAND_BANK(Init->NandBank));
+  assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
+  assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
+  assert_param(IS_FMC_ECC_STATE(Init->EccComputation));
+  assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize));
+  assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
+  assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));   
+
+  /* Get the NAND bank 3 register value */
+  tmpr = Device->PCR;
+
+  /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
+  tmpr &= ((uint32_t)~(FMC_PCR_PWAITEN  | FMC_PCR_PBKEN | FMC_PCR_PTYP | \
+                       FMC_PCR_PWID | FMC_PCR_ECCEN | FMC_PCR_TCLR | \
+                       FMC_PCR_TAR | FMC_PCR_ECCPS));  
+  /* Set NAND device control parameters */
+  tmpr |= (uint32_t)(Init->Waitfeature                |\
+                      FMC_PCR_MEMORY_TYPE_NAND         |\
+                      Init->MemoryDataWidth            |\
+                      Init->EccComputation             |\
+                      Init->ECCPageSize                |\
+                      ((Init->TCLRSetupTime) << 9)     |\
+                      ((Init->TARSetupTime) << 13));   
+  
+    /* NAND bank 3 registers configuration */
+    Device->PCR  = tmpr;
+  
+  return HAL_OK;
+
+}
+
+/**
+  * @brief  Initializes the FMC_NAND Common space Timing according to the specified
+  *         parameters in the FMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to NAND device instance
+  * @param  Timing: Pointer to NAND timing structure
+  * @param  Bank: NAND bank number   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr = 0;  
+  
+  /* Check the parameters */
+  assert_param(IS_FMC_NAND_DEVICE(Device));
+  assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+  
+  /* Get the NAND bank 3 register value */
+  tmpr = Device->PMEM;
+
+  /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
+  tmpr &= ((uint32_t)~(FMC_PMEM_MEMSET3  | FMC_PMEM_MEMWAIT3 | FMC_PMEM_MEMHOLD3 | \
+                       FMC_PMEM_MEMHIZ3)); 
+  /* Set FMC_NAND device timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                  |\
+                       ((Timing->WaitSetupTime) << 8)     |\
+                       ((Timing->HoldSetupTime) << 16)    |\
+                       ((Timing->HiZSetupTime) << 24)
+                       );
+                            
+    /* NAND bank 3 registers configuration */
+    Device->PMEM = tmpr;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Initializes the FMC_NAND Attribute space Timing according to the specified
+  *         parameters in the FMC_NAND_PCC_TimingTypeDef
+  * @param  Device: Pointer to NAND device instance
+  * @param  Timing: Pointer to NAND timing structure
+  * @param  Bank: NAND bank number 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr = 0;  
+  
+  /* Check the parameters */ 
+  assert_param(IS_FMC_NAND_DEVICE(Device)); 
+  assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
+  assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
+  assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
+  assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
+  assert_param(IS_FMC_NAND_BANK(Bank));
+  
+  /* Get the NAND bank 3 register value */
+  tmpr = Device->PATT;
+
+  /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
+  tmpr &= ((uint32_t)~(FMC_PATT_ATTSET3  | FMC_PATT_ATTWAIT3 | FMC_PATT_ATTHOLD3 | \
+                       FMC_PATT_ATTHIZ3));
+  /* Set FMC_NAND device timing parameters */
+  tmpr |= (uint32_t)(Timing->SetupTime                  |\
+                   ((Timing->WaitSetupTime) << 8)     |\
+                   ((Timing->HoldSetupTime) << 16)    |\
+                   ((Timing->HiZSetupTime) << 24));
+                       
+    /* NAND bank 3 registers configuration */
+    Device->PATT = tmpr;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the FMC_NAND device 
+  * @param  Device: Pointer to NAND device instance
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */ 
+  assert_param(IS_FMC_NAND_DEVICE(Device)); 
+  assert_param(IS_FMC_NAND_BANK(Bank));
+      
+  /* Disable the NAND Bank */
+  __FMC_NAND_DISABLE(Device);
+ 
+    /* Set the FMC_NAND_BANK3 registers to their reset values */
+    Device->PCR  = 0x00000018;
+    Device->SR   = 0x00000040;
+    Device->PMEM = 0xFCFCFCFC;
+    Device->PATT = 0xFCFCFCFC; 
+  
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_FMC_NAND_Group3 Control functions 
+  *  @brief   management functions 
+  *
+@verbatim   
+  ==============================================================================
+                       ##### FMC_NAND Control functions #####
+  ==============================================================================  
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the FMC NAND interface.
+
+@endverbatim
+  * @{
+  */ 
+
+    
+/**
+  * @brief  Enables dynamically FMC_NAND ECC feature.
+  * @param  Device: Pointer to NAND device instance
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */    
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */ 
+  assert_param(IS_FMC_NAND_DEVICE(Device)); 
+  assert_param(IS_FMC_NAND_BANK(Bank));
+    
+  /* Enable ECC feature */
+    Device->PCR |= FMC_PCR_ECCEN;
+  
+  return HAL_OK;  
+}
+
+
+/**
+  * @brief  Disables dynamically FMC_NAND ECC feature.
+  * @param  Device: Pointer to NAND device instance
+  * @param  Bank: NAND bank number
+  * @retval HAL status
+  */  
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank)  
+{  
+  /* Check the parameters */ 
+  assert_param(IS_FMC_NAND_DEVICE(Device)); 
+  assert_param(IS_FMC_NAND_BANK(Bank));
+    
+  /* Disable ECC feature */
+    Device->PCR &= ~FMC_PCR_ECCEN;
+
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Disables dynamically FMC_NAND ECC feature.
+  * @param  Device: Pointer to NAND device instance
+  * @param  ECCval: Pointer to ECC value
+  * @param  Bank: NAND bank number
+  * @param  Timeout: Timeout wait value  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
+{
+  uint32_t tickstart = 0;
+
+  /* Check the parameters */ 
+  assert_param(IS_FMC_NAND_DEVICE(Device)); 
+  assert_param(IS_FMC_NAND_BANK(Bank));
+
+  /* Get tick */ 
+  tickstart = HAL_GetTick();
+
+  /* Wait until FIFO is empty */
+  while(__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET)
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        return HAL_TIMEOUT;
+      }
+    }  
+  }
+ 
+  /* Get the ECCR register value */
+  *ECCval = (uint32_t)Device->ECCR;
+
+  return HAL_OK;  
+}
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_SDRAM
+  * @brief    SDRAM Controller functions 
+  *
+  @verbatim 
+  ==============================================================================
+                     ##### How to use SDRAM device driver #####
+  ==============================================================================
+  [..] 
+    This driver contains a set of APIs to interface with the FMC SDRAM banks in order
+    to run the SDRAM external devices.
+    
+    (+) FMC SDRAM bank reset using the function FMC_SDRAM_DeInit() 
+    (+) FMC SDRAM bank control configuration using the function FMC_SDRAM_Init()
+    (+) FMC SDRAM bank timing configuration using the function FMC_SDRAM_Timing_Init()
+    (+) FMC SDRAM bank enable/disable write operation using the functions
+        FMC_SDRAM_WriteOperation_Enable()/FMC_SDRAM_WriteOperation_Disable()   
+    (+) FMC SDRAM bank send command using the function FMC_SDRAM_SendCommand()      
+       
+@endverbatim
+  * @{
+  */
+         
+/** @addtogroup FMC_LL_SDRAM_Private_Functions_Group1
+  *  @brief    Initialization and Configuration functions 
+  *
+@verbatim    
+  ==============================================================================
+              ##### Initialization and de_initialization functions #####
+  ==============================================================================
+  [..]  
+    This section provides functions allowing to:
+    (+) Initialize and configure the FMC SDRAM interface
+    (+) De-initialize the FMC SDRAM interface 
+    (+) Configure the FMC clock and associated GPIOs
+        
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the FMC_SDRAM device according to the specified
+  *         control parameters in the FMC_SDRAM_InitTypeDef
+  * @param  Device: Pointer to SDRAM device instance
+  * @param  Init: Pointer to SDRAM Initialization structure   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init)
+{
+  uint32_t tmpr1 = 0;
+  uint32_t tmpr2 = 0;
+    
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_SDRAM_BANK(Init->SDBank));
+  assert_param(IS_FMC_COLUMNBITS_NUMBER(Init->ColumnBitsNumber));
+  assert_param(IS_FMC_ROWBITS_NUMBER(Init->RowBitsNumber));
+  assert_param(IS_FMC_SDMEMORY_WIDTH(Init->MemoryDataWidth));
+  assert_param(IS_FMC_INTERNALBANK_NUMBER(Init->InternalBankNumber));
+  assert_param(IS_FMC_CAS_LATENCY(Init->CASLatency));
+  assert_param(IS_FMC_WRITE_PROTECTION(Init->WriteProtection));
+  assert_param(IS_FMC_SDCLOCK_PERIOD(Init->SDClockPeriod));
+  assert_param(IS_FMC_READ_BURST(Init->ReadBurst));
+  assert_param(IS_FMC_READPIPE_DELAY(Init->ReadPipeDelay));   
+
+  /* Set SDRAM bank configuration parameters */
+  if (Init->SDBank != FMC_SDRAM_BANK2) 
+  { 
+    tmpr1 = Device->SDCR[FMC_SDRAM_BANK1];
+    
+    /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
+    tmpr1 &= ((uint32_t)~(FMC_SDCR1_NC  | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
+                         FMC_SDCR1_NB  | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
+                         FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
+
+    tmpr1 |= (uint32_t)(Init->ColumnBitsNumber   |\
+                        Init->RowBitsNumber      |\
+                        Init->MemoryDataWidth    |\
+                        Init->InternalBankNumber |\
+                        Init->CASLatency         |\
+                        Init->WriteProtection    |\
+                        Init->SDClockPeriod      |\
+                        Init->ReadBurst          |\
+                        Init->ReadPipeDelay
+                        );                                      
+    Device->SDCR[FMC_SDRAM_BANK1] = tmpr1;
+  }
+  else /* FMC_Bank2_SDRAM */                      
+  {
+    tmpr1 = Device->SDCR[FMC_SDRAM_BANK1];
+    
+    /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
+    tmpr1 &= ((uint32_t)~(FMC_SDCR1_NC  | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
+                          FMC_SDCR1_NB  | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
+                          FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
+    
+    tmpr1 |= (uint32_t)(Init->SDClockPeriod      |\
+                        Init->ReadBurst          |\
+                        Init->ReadPipeDelay);  
+    
+    tmpr2 = Device->SDCR[FMC_SDRAM_BANK2];
+    
+    /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
+    tmpr2 &= ((uint32_t)~(FMC_SDCR1_NC  | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
+                          FMC_SDCR1_NB  | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
+                          FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
+
+    tmpr2 |= (uint32_t)(Init->ColumnBitsNumber   |\
+                       Init->RowBitsNumber      |\
+                       Init->MemoryDataWidth    |\
+                       Init->InternalBankNumber |\
+                       Init->CASLatency         |\
+                       Init->WriteProtection);
+
+    Device->SDCR[FMC_SDRAM_BANK1] = tmpr1;
+    Device->SDCR[FMC_SDRAM_BANK2] = tmpr2;
+  }  
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initializes the FMC_SDRAM device timing according to the specified
+  *         parameters in the FMC_SDRAM_TimingTypeDef
+  * @param  Device: Pointer to SDRAM device instance
+  * @param  Timing: Pointer to SDRAM Timing structure
+  * @param  Bank: SDRAM bank number   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+  uint32_t tmpr1 = 0;
+  uint32_t tmpr2 = 0;
+    
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_LOADTOACTIVE_DELAY(Timing->LoadToActiveDelay));
+  assert_param(IS_FMC_EXITSELFREFRESH_DELAY(Timing->ExitSelfRefreshDelay));
+  assert_param(IS_FMC_SELFREFRESH_TIME(Timing->SelfRefreshTime));
+  assert_param(IS_FMC_ROWCYCLE_DELAY(Timing->RowCycleDelay));
+  assert_param(IS_FMC_WRITE_RECOVERY_TIME(Timing->WriteRecoveryTime));
+  assert_param(IS_FMC_RP_DELAY(Timing->RPDelay));
+  assert_param(IS_FMC_RCD_DELAY(Timing->RCDDelay));
+  assert_param(IS_FMC_SDRAM_BANK(Bank));
+  
+  /* Set SDRAM device timing parameters */ 
+  if (Bank != FMC_SDRAM_BANK2) 
+  { 
+    tmpr1 = Device->SDTR[FMC_SDRAM_BANK1];
+    
+    /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
+    tmpr1 &= ((uint32_t)~(FMC_SDTR1_TMRD  | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
+                          FMC_SDTR1_TRC  | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
+                          FMC_SDTR1_TRCD));
+    
+    tmpr1 |= (uint32_t)(((Timing->LoadToActiveDelay)-1)           |\
+                       (((Timing->ExitSelfRefreshDelay)-1) << 4) |\
+                       (((Timing->SelfRefreshTime)-1) << 8)      |\
+                       (((Timing->RowCycleDelay)-1) << 12)       |\
+                       (((Timing->WriteRecoveryTime)-1) <<16)    |\
+                       (((Timing->RPDelay)-1) << 20)             |\
+                       (((Timing->RCDDelay)-1) << 24));
+    Device->SDTR[FMC_SDRAM_BANK1] = tmpr1;
+  }
+  else /* FMC_Bank2_SDRAM */
+  {  
+    tmpr1 = Device->SDTR[FMC_SDRAM_BANK2];
+    
+    /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
+    tmpr1 &= ((uint32_t)~(FMC_SDTR1_TMRD  | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
+                          FMC_SDTR1_TRC  | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
+                          FMC_SDTR1_TRCD));
+    
+    tmpr1 |= (uint32_t)(((Timing->LoadToActiveDelay)-1)           |\
+                       (((Timing->ExitSelfRefreshDelay)-1) << 4) |\
+                       (((Timing->SelfRefreshTime)-1) << 8)      |\
+                       (((Timing->WriteRecoveryTime)-1) <<16)    |\
+                       (((Timing->RCDDelay)-1) << 24));   
+    
+    tmpr2 = Device->SDTR[FMC_SDRAM_BANK1];
+    
+    /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
+    tmpr2 &= ((uint32_t)~(FMC_SDTR1_TMRD  | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
+                          FMC_SDTR1_TRC  | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
+                          FMC_SDTR1_TRCD));
+    tmpr2 |= (uint32_t)((((Timing->RowCycleDelay)-1) << 12)       |\
+                        (((Timing->RPDelay)-1) << 20)); 
+
+    Device->SDTR[FMC_SDRAM_BANK2] = tmpr1;
+    Device->SDTR[FMC_SDRAM_BANK1] = tmpr2;
+  }   
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  DeInitializes the FMC_SDRAM peripheral 
+  * @param  Device: Pointer to SDRAM device instance
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_SDRAM_BANK(Bank));
+  
+  /* De-initialize the SDRAM device */
+  Device->SDCR[Bank] = 0x000002D0;
+  Device->SDTR[Bank] = 0x0FFFFFFF;    
+  Device->SDCMR      = 0x00000000;
+  Device->SDRTR      = 0x00000000;
+  Device->SDSR       = 0x00000000;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @addtogroup FMC_LL_SDRAMPrivate_Functions_Group2
+  *  @brief   management functions 
+  *
+@verbatim   
+  ==============================================================================
+                      ##### FMC_SDRAM Control functions #####
+  ==============================================================================  
+  [..]
+    This subsection provides a set of functions allowing to control dynamically
+    the FMC SDRAM interface.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Enables dynamically FMC_SDRAM write protection.
+  * @param  Device: Pointer to SDRAM device instance
+  * @param  Bank: SDRAM bank number 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_SDRAM_BANK(Bank));
+  
+  /* Enable write protection */
+  Device->SDCR[Bank] |= FMC_SDRAM_WRITE_PROTECTION_ENABLE;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Disables dynamically FMC_SDRAM write protection.
+  * @param  hsdram: FMC_SDRAM handle
+  * @retval HAL status
+  */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_SDRAM_BANK(Bank));
+  
+  /* Disable write protection */
+  Device->SDCR[Bank] &= ~FMC_SDRAM_WRITE_PROTECTION_ENABLE;
+  
+  return HAL_OK;
+}
+  
+/**
+  * @brief  Send Command to the FMC SDRAM bank
+  * @param  Device: Pointer to SDRAM device instance
+  * @param  Command: Pointer to SDRAM command structure   
+  * @param  Timing: Pointer to SDRAM Timing structure
+  * @param  Timeout: Timeout wait value
+  * @retval HAL state
+  */  
+HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout)
+{
+  __IO uint32_t tmpr = 0;
+  uint32_t tickstart = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_COMMAND_MODE(Command->CommandMode));
+  assert_param(IS_FMC_COMMAND_TARGET(Command->CommandTarget));
+  assert_param(IS_FMC_AUTOREFRESH_NUMBER(Command->AutoRefreshNumber));
+  assert_param(IS_FMC_MODE_REGISTER(Command->ModeRegisterDefinition));  
+
+  /* Set command register */
+  tmpr = (uint32_t)((Command->CommandMode)                  |\
+                    (Command->CommandTarget)                |\
+                    (((Command->AutoRefreshNumber)-1) << 5) |\
+                    ((Command->ModeRegisterDefinition) << 9)
+                    );
+    
+  Device->SDCMR = tmpr;
+
+  /* Get tick */ 
+  tickstart = HAL_GetTick();
+
+  /* wait until command is send */
+  while(HAL_IS_BIT_SET(Device->SDSR, FMC_SDSR_BUSY))
+  {
+    /* Check for the Timeout */
+    if(Timeout != HAL_MAX_DELAY)
+    {
+      if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
+      {
+        return HAL_TIMEOUT;
+      }
+    }     
+  }
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Program the SDRAM Memory Refresh rate.
+  * @param  Device: Pointer to SDRAM device instance  
+  * @param  RefreshRate: The SDRAM refresh rate value.       
+  * @retval HAL state
+  */
+HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_REFRESH_RATE(RefreshRate));
+  
+  /* Set the refresh rate in command register */
+  Device->SDRTR |= (RefreshRate<<1);
+  
+  return HAL_OK;   
+}
+
+/**
+  * @brief  Set the Number of consecutive SDRAM Memory auto Refresh commands.
+  * @param  Device: Pointer to SDRAM device instance  
+  * @param  AutoRefreshNumber: Specifies the auto Refresh number.       
+  * @retval None
+  */
+HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber)
+{
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_AUTOREFRESH_NUMBER(AutoRefreshNumber));
+  
+  /* Set the Auto-refresh number in command register */
+  Device->SDCMR |= (AutoRefreshNumber << 5); 
+
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Returns the indicated FMC SDRAM bank mode status.
+  * @param  Device: Pointer to SDRAM device instance  
+  * @param  Bank: Defines the FMC SDRAM bank. This parameter can be 
+  *                     FMC_Bank1_SDRAM or FMC_Bank2_SDRAM. 
+  * @retval The FMC SDRAM bank mode status, could be on of the following values:
+  *         FMC_SDRAM_NORMAL_MODE, FMC_SDRAM_SELF_REFRESH_MODE or 
+  *         FMC_SDRAM_POWER_DOWN_MODE.           
+  */
+uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_FMC_SDRAM_DEVICE(Device));
+  assert_param(IS_FMC_SDRAM_BANK(Bank));
+
+  /* Get the corresponding bank mode */
+  if(Bank == FMC_SDRAM_BANK1)
+  {
+    tmpreg = (uint32_t)(Device->SDSR & FMC_SDSR_MODES1); 
+  }
+  else
+  {
+    tmpreg = ((uint32_t)(Device->SDSR & FMC_SDSR_MODES2) >> 2);
+  }
+  
+  /* Return the mode status */
+  return tmpreg;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_SDRAM_MODULE_ENABLED */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_ll_fmc.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1339 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_ll_fmc.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of FMC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_FMC_H
+#define __STM32F7xx_LL_FMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup FMC_LL
+  * @{
+  */
+
+/** @addtogroup FMC_LL_Private_Macros
+  * @{
+  */
+#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_NORSRAM_BANK1) || \
+                                   ((BANK) == FMC_NORSRAM_BANK2) || \
+                                   ((BANK) == FMC_NORSRAM_BANK3) || \
+                                   ((BANK) == FMC_NORSRAM_BANK4))
+
+#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
+                              ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE))
+
+#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \
+                                    ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \
+                                    ((__MEMORY__) == FMC_MEMORY_TYPE_NOR))
+
+#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8)  || \
+                                                 ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+                                                 ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \
+                                       ((__MODE__) == FMC_ACCESS_MODE_B) || \
+                                       ((__MODE__) == FMC_ACCESS_MODE_C) || \
+                                       ((__MODE__) == FMC_ACCESS_MODE_D))
+
+#define IS_FMC_NAND_BANK(BANK) ((BANK) == FMC_NAND_BANK3)
+
+#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_NAND_WAIT_FEATURE_DISABLE) || \
+                                      ((FEATURE) == FMC_NAND_WAIT_FEATURE_ENABLE))
+
+#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_MEM_BUS_WIDTH_8) || \
+                                         ((WIDTH) == FMC_NAND_MEM_BUS_WIDTH_16))
+
+#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_NAND_ECC_DISABLE) || \
+                                 ((STATE) == FMC_NAND_ECC_ENABLE))
+
+#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_NAND_ECC_PAGE_SIZE_256BYTE)  || \
+                                   ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_512BYTE)  || \
+                                   ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+                                   ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+                                   ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+                                   ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+								   
+#define IS_FMC_SDMEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_8)  || \
+                                      ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \
+                                      ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FMC_WRITE_PROTECTION(__WRITE__) (((__WRITE__) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \
+                                            ((__WRITE__) == FMC_SDRAM_WRITE_PROTECTION_ENABLE))									  
+
+#define IS_FMC_SDCLOCK_PERIOD(__PERIOD__) (((__PERIOD__) == FMC_SDRAM_CLOCK_DISABLE)  || \
+                                           ((__PERIOD__) == FMC_SDRAM_CLOCK_PERIOD_2) || \
+                                           ((__PERIOD__) == FMC_SDRAM_CLOCK_PERIOD_3))
+										   
+#define IS_FMC_READ_BURST(__RBURST__) (((__RBURST__) == FMC_SDRAM_RBURST_DISABLE) || \
+                                       ((__RBURST__) == FMC_SDRAM_RBURST_ENABLE))
+									   
+#define IS_FMC_READPIPE_DELAY(__DELAY__) (((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_0) || \
+                                          ((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_1) || \
+                                          ((__DELAY__) == FMC_SDRAM_RPIPE_DELAY_2))
+
+#define IS_FMC_COMMAND_MODE(__COMMAND__) (((__COMMAND__) == FMC_SDRAM_CMD_NORMAL_MODE)      || \
+                                          ((__COMMAND__) == FMC_SDRAM_CMD_CLK_ENABLE)       || \
+                                          ((__COMMAND__) == FMC_SDRAM_CMD_PALL)             || \
+                                          ((__COMMAND__) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \
+                                          ((__COMMAND__) == FMC_SDRAM_CMD_LOAD_MODE)        || \
+                                          ((__COMMAND__) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \
+                                          ((__COMMAND__) == FMC_SDRAM_CMD_POWERDOWN_MODE))
+
+#define IS_FMC_COMMAND_TARGET(__TARGET__) (((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK1) || \
+                                           ((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK2) || \
+                                           ((__TARGET__) == FMC_SDRAM_CMD_TARGET_BANK1_2)) 										  
+						   
+/** @defgroup FMC_TCLR_Setup_Time FMC TCLR Setup Time
+  * @{
+  */
+#define IS_FMC_TCLR_TIME(__TIME__) ((__TIME__) <= 255)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_TAR_Setup_Time FMC TAR Setup Time 
+  * @{
+  */
+#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Setup_Time FMC Setup Time 
+  * @{
+  */
+#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 254)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Wait_Setup_Time FMC Wait Setup Time 
+  * @{
+  */
+#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 254)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Hold_Setup_Time FMC Hold Setup Time 
+  * @{
+  */
+#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 254)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_HiZ_Setup_Time FMC HiZ Setup Time 
+  * @{
+  */
+#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 254)
+/**
+  * @}
+  */
+
+#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \
+                                      ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE))
+
+#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
+                                             ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
+
+#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \
+                                                ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS)) 
+
+#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \
+                                                ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE))
+
+#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \
+                                          ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE))
+
+#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \
+                                         ((__MODE__) == FMC_EXTENDED_MODE_ENABLE))
+
+#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+                                     ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
+
+/** @defgroup FMC_Data_Latency FMC Data Latency 
+  * @{
+  */
+#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1) && ((__LATENCY__) <= 17))
+/**
+  * @}
+  */
+
+#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \
+                                        ((__BURST__) == FMC_WRITE_BURST_ENABLE))
+
+#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+                                        ((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+
+
+/** @defgroup FMC_Address_Setup_Time FMC Address Setup Time
+  * @{
+  */
+#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Address_Hold_Time FMC Address Hold Time
+  * @{
+  */
+#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 15))
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Data_Setup_Time FMC Data Setup Time
+  * @{
+  */
+#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 255))
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Bus_Turn_around_Duration FMC Bus Turn around Duration
+  * @{
+  */
+#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_CLK_Division FMC CLK Division 
+  * @{
+  */
+#define IS_FMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16))
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_LoadToActive_Delay FMC SDRAM LoadToActive Delay
+  * @{
+  */
+#define IS_FMC_LOADTOACTIVE_DELAY(__DELAY__) (((__DELAY__) > 0) && ((__DELAY__) <= 16))
+/**
+  * @}
+  */
+  
+/** @defgroup FMC_SDRAM_ExitSelfRefresh_Delay FMC SDRAM ExitSelfRefresh Delay
+  * @{
+  */
+#define IS_FMC_EXITSELFREFRESH_DELAY(__DELAY__) (((__DELAY__) > 0) && ((__DELAY__) <= 16))
+/**
+  * @}
+  */ 
+     
+/** @defgroup FMC_SDRAM_SelfRefresh_Time FMC SDRAM SelfRefresh Time
+  * @{
+  */  
+#define IS_FMC_SELFREFRESH_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 16))
+/**
+  * @}
+  */
+  
+/** @defgroup FMC_SDRAM_RowCycle_Delay FMC SDRAM RowCycle Delay
+  * @{
+  */  
+#define IS_FMC_ROWCYCLE_DELAY(__DELAY__) (((__DELAY__) > 0) && ((__DELAY__) <= 16))
+/**
+  * @}
+  */  
+  
+/** @defgroup FMC_SDRAM_Write_Recovery_Time FMC SDRAM Write Recovery Time
+  * @{
+  */  
+#define IS_FMC_WRITE_RECOVERY_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 16))
+/**
+  * @}
+  */         
+  
+/** @defgroup FMC_SDRAM_RP_Delay FMC SDRAM RP Delay
+  * @{
+  */  
+#define IS_FMC_RP_DELAY(__DELAY__) (((__DELAY__) > 0) && ((__DELAY__) <= 16))
+/**
+  * @}
+  */ 
+  
+/** @defgroup FMC_SDRAM_RCD_Delay FMC SDRAM RCD Delay
+  * @{
+  */  
+#define IS_FMC_RCD_DELAY(__DELAY__) (((__DELAY__) > 0) && ((__DELAY__) <= 16))
+/**
+  * @}
+  */
+  
+/** @defgroup FMC_SDRAM_AutoRefresh_Number FMC SDRAM AutoRefresh Number
+  * @{
+  */  
+#define IS_FMC_AUTOREFRESH_NUMBER(__NUMBER__) (((__NUMBER__) > 0) && ((__NUMBER__) <= 16))
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_ModeRegister_Definition FMC SDRAM ModeRegister Definition
+  * @{
+  */
+#define IS_FMC_MODE_REGISTER(__CONTENT__) ((__CONTENT__) <= 8191)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Refresh_rate FMC SDRAM Refresh rate
+  * @{
+  */
+#define IS_FMC_REFRESH_RATE(__RATE__) ((__RATE__) <= 8191)
+/**
+  * @}
+  */
+  
+/** @defgroup FMC_NORSRAM_Device_Instance FMC NORSRAM Device Instance
+  * @{
+  */
+#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_NORSRAM_EXTENDED_Device_Instance FMC NORSRAM EXTENDED Device Instance
+  * @{
+  */
+#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE)
+/**
+  * @}
+  */
+  
+/** @defgroup FMC_NAND_Device_Instance FMC NAND Device Instance
+  * @{
+  */
+#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Device_Instance FMC SDRAM Device Instance
+  * @{
+  */
+#define IS_FMC_SDRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_SDRAM_DEVICE)
+/**
+  * @}
+  */
+
+#define IS_FMC_SDRAM_BANK(BANK) (((BANK) == FMC_SDRAM_BANK1) || \
+                                 ((BANK) == FMC_SDRAM_BANK2))
+
+#define IS_FMC_COLUMNBITS_NUMBER(COLUMN) (((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_8)  || \
+                                          ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_9)  || \
+                                          ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \
+                                          ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_11))
+
+#define IS_FMC_ROWBITS_NUMBER(ROW) (((ROW) == FMC_SDRAM_ROW_BITS_NUM_11) || \
+                                    ((ROW) == FMC_SDRAM_ROW_BITS_NUM_12) || \
+                                    ((ROW) == FMC_SDRAM_ROW_BITS_NUM_13))
+
+#define IS_FMC_INTERNALBANK_NUMBER(NUMBER) (((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \
+                                            ((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_4))
+
+
+#define IS_FMC_CAS_LATENCY(LATENCY) (((LATENCY) == FMC_SDRAM_CAS_LATENCY_1) || \
+                                     ((LATENCY) == FMC_SDRAM_CAS_LATENCY_2) || \
+                                     ((LATENCY) == FMC_SDRAM_CAS_LATENCY_3))
+
+#define IS_FMC_PAGESIZE(__SIZE__) (((__SIZE__) == FMC_PAGE_SIZE_NONE) || \
+                                   ((__SIZE__) == FMC_PAGE_SIZE_128) || \
+                                   ((__SIZE__) == FMC_PAGE_SIZE_256) || \
+                                   ((__SIZE__) == FMC_PAGE_SIZE_512) || \
+                                   ((__SIZE__) == FMC_PAGE_SIZE_1024))
+
+#define IS_FMC_WRITE_FIFO(__FIFO__) (((__FIFO__) == FMC_WRITE_FIFO_DISABLE) || \
+                                     ((__FIFO__) == FMC_WRITE_FIFO_ENABLE))
+/**
+  * @}
+  */
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup FMC_Exported_typedef FMC Low Layer Exported Types
+  * @{
+  */
+#define FMC_NORSRAM_TypeDef            FMC_Bank1_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef   FMC_Bank1E_TypeDef
+#define FMC_NAND_TypeDef               FMC_Bank3_TypeDef
+#define FMC_SDRAM_TypeDef              FMC_Bank5_6_TypeDef
+
+#define FMC_NORSRAM_DEVICE             FMC_Bank1
+#define FMC_NORSRAM_EXTENDED_DEVICE    FMC_Bank1E
+#define FMC_NAND_DEVICE                FMC_Bank3
+#define FMC_SDRAM_DEVICE               FMC_Bank5_6
+
+/** 
+  * @brief  FMC NORSRAM Configuration Structure definition
+  */ 
+typedef struct
+{
+  uint32_t NSBank;                       /*!< Specifies the NORSRAM memory device that will be used.
+                                              This parameter can be a value of @ref FMC_NORSRAM_Bank                     */
+
+  uint32_t DataAddressMux;               /*!< Specifies whether the address and data values are
+                                              multiplexed on the data bus or not. 
+                                              This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing    */
+
+  uint32_t MemoryType;                   /*!< Specifies the type of external memory attached to
+                                              the corresponding memory device.
+                                              This parameter can be a value of @ref FMC_Memory_Type                      */
+
+  uint32_t MemoryDataWidth;              /*!< Specifies the external memory device width.
+                                              This parameter can be a value of @ref FMC_NORSRAM_Data_Width               */
+
+  uint32_t BurstAccessMode;              /*!< Enables or disables the burst access mode for Flash memory,
+                                              valid only with synchronous burst Flash memories.
+                                              This parameter can be a value of @ref FMC_Burst_Access_Mode                */
+
+  uint32_t WaitSignalPolarity;           /*!< Specifies the wait signal polarity, valid only when accessing
+                                              the Flash memory in burst mode.
+                                              This parameter can be a value of @ref FMC_Wait_Signal_Polarity             */
+
+  uint32_t WaitSignalActive;             /*!< Specifies if the wait signal is asserted by the memory one
+                                              clock cycle before the wait state or during the wait state,
+                                              valid only when accessing memories in burst mode. 
+                                              This parameter can be a value of @ref FMC_Wait_Timing                      */
+
+  uint32_t WriteOperation;               /*!< Enables or disables the write operation in the selected device by the FMC. 
+                                              This parameter can be a value of @ref FMC_Write_Operation                  */
+
+  uint32_t WaitSignal;                   /*!< Enables or disables the wait state insertion via wait
+                                              signal, valid for Flash memory access in burst mode. 
+                                              This parameter can be a value of @ref FMC_Wait_Signal                      */
+
+  uint32_t ExtendedMode;                 /*!< Enables or disables the extended mode.
+                                              This parameter can be a value of @ref FMC_Extended_Mode                    */
+
+  uint32_t AsynchronousWait;             /*!< Enables or disables wait signal during asynchronous transfers,
+                                              valid only with asynchronous Flash memories.
+                                              This parameter can be a value of @ref FMC_AsynchronousWait                 */
+
+  uint32_t WriteBurst;                   /*!< Enables or disables the write burst operation.
+                                              This parameter can be a value of @ref FMC_Write_Burst                      */
+
+  uint32_t ContinuousClock;              /*!< Enables or disables the FMC clock output to external memory devices.
+                                              This parameter is only enabled through the FMC_BCR1 register, and don't care 
+                                              through FMC_BCR2..4 registers.
+                                              This parameter can be a value of @ref FMC_Continous_Clock                  */
+
+  uint32_t WriteFifo;                    /*!< Enables or disables the write FIFO used by the FMC controller.
+                                              This parameter is only enabled through the FMC_BCR1 register, and don't care 
+                                              through FMC_BCR2..4 registers.
+                                              This parameter can be a value of @ref FMC_Write_FIFO                      */
+
+  uint32_t PageSize;                     /*!< Specifies the memory page size.
+                                              This parameter can be a value of @ref FMC_Page_Size                        */
+
+}FMC_NORSRAM_InitTypeDef;
+
+/** 
+  * @brief  FMC NORSRAM Timing parameters structure definition  
+  */
+typedef struct
+{
+  uint32_t AddressSetupTime;             /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the address setup time. 
+                                              This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+                                              @note This parameter is not used with synchronous NOR Flash memories.      */
+
+  uint32_t AddressHoldTime;              /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the address hold time.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 15. 
+                                              @note This parameter is not used with synchronous NOR Flash memories.      */
+
+  uint32_t DataSetupTime;                /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the data setup time.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+                                              @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed 
+                                              NOR Flash memories.                                                        */
+
+  uint32_t BusTurnAroundDuration;        /*!< Defines the number of HCLK cycles to configure
+                                              the duration of the bus turnaround.
+                                              This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+                                              @note This parameter is only used for multiplexed NOR Flash memories.      */
+
+  uint32_t CLKDivision;                  /*!< Defines the period of CLK clock output signal, expressed in number of 
+                                              HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+                                              @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM 
+                                              accesses.                                                                  */
+
+  uint32_t DataLatency;                  /*!< Defines the number of memory clock cycles to issue
+                                              to the memory before getting the first data.
+                                              The parameter value depends on the memory type as shown below:
+                                              - It must be set to 0 in case of a CRAM
+                                              - It is don't care in asynchronous NOR, SRAM or ROM accesses
+                                              - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+                                                with synchronous burst mode enable                                       */
+
+  uint32_t AccessMode;                   /*!< Specifies the asynchronous access mode. 
+                                              This parameter can be a value of @ref FMC_Access_Mode                      */
+}FMC_NORSRAM_TimingTypeDef;
+
+/** 
+  * @brief  FMC NAND Configuration Structure definition  
+  */ 
+typedef struct
+{
+  uint32_t NandBank;               /*!< Specifies the NAND memory device that will be used.
+                                        This parameter can be a value of @ref FMC_NAND_Bank                    */
+
+  uint32_t Waitfeature;            /*!< Enables or disables the Wait feature for the NAND Memory device.
+                                        This parameter can be any value of @ref FMC_Wait_feature               */
+
+  uint32_t MemoryDataWidth;        /*!< Specifies the external memory device width.
+                                        This parameter can be any value of @ref FMC_NAND_Data_Width            */
+
+  uint32_t EccComputation;         /*!< Enables or disables the ECC computation.
+                                        This parameter can be any value of @ref FMC_ECC                        */
+
+  uint32_t ECCPageSize;            /*!< Defines the page size for the extended ECC.
+                                        This parameter can be any value of @ref FMC_ECC_Page_Size              */
+
+  uint32_t TCLRSetupTime;          /*!< Defines the number of HCLK cycles to configure the
+                                        delay between CLE low and RE low.
+                                        This parameter can be a value between Min_Data = 0 and Max_Data = 255  */
+
+  uint32_t TARSetupTime;           /*!< Defines the number of HCLK cycles to configure the
+                                        delay between ALE low and RE low.
+                                        This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_InitTypeDef;
+
+/** 
+  * @brief  FMC NAND Timing parameters structure definition
+  */
+typedef struct
+{
+  uint32_t SetupTime;            /*!< Defines the number of HCLK cycles to setup address before
+                                      the command assertion for NAND-Flash read or write access
+                                      to common/Attribute or I/O memory space (depending on
+                                      the memory space timing to be configured).
+                                      This parameter can be a value between Min_Data = 0 and Max_Data = 254    */
+
+  uint32_t WaitSetupTime;        /*!< Defines the minimum number of HCLK cycles to assert the
+                                      command for NAND-Flash read or write access to
+                                      common/Attribute or I/O memory space (depending on the
+                                      memory space timing to be configured). 
+                                      This parameter can be a number between Min_Data = 0 and Max_Data = 254   */
+
+  uint32_t HoldSetupTime;        /*!< Defines the number of HCLK clock cycles to hold address
+                                      (and data for write access) after the command de-assertion
+                                      for NAND-Flash read or write access to common/Attribute
+                                      or I/O memory space (depending on the memory space timing
+                                      to be configured).
+                                      This parameter can be a number between Min_Data = 0 and Max_Data = 254   */
+
+  uint32_t HiZSetupTime;         /*!< Defines the number of HCLK clock cycles during which the
+                                      data bus is kept in HiZ after the start of a NAND-Flash
+                                      write access to common/Attribute or I/O memory space (depending
+                                      on the memory space timing to be configured).
+                                      This parameter can be a number between Min_Data = 0 and Max_Data = 254   */
+}FMC_NAND_PCC_TimingTypeDef;
+
+/** 
+  * @brief  FMC SDRAM Configuration Structure definition  
+  */  
+typedef struct
+{
+  uint32_t SDBank;                      /*!< Specifies the SDRAM memory device that will be used.
+                                             This parameter can be a value of @ref FMC_SDRAM_Bank                */
+
+  uint32_t ColumnBitsNumber;            /*!< Defines the number of bits of column address.
+                                             This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */
+
+  uint32_t RowBitsNumber;               /*!< Defines the number of bits of column address.
+                                             This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number.    */
+
+  uint32_t MemoryDataWidth;             /*!< Defines the memory device width.
+                                             This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width.   */
+
+  uint32_t InternalBankNumber;          /*!< Defines the number of the device's internal banks.
+                                             This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number.      */
+
+  uint32_t CASLatency;                  /*!< Defines the SDRAM CAS latency in number of memory clock cycles.
+                                             This parameter can be a value of @ref FMC_SDRAM_CAS_Latency.        */
+
+  uint32_t WriteProtection;             /*!< Enables the SDRAM device to be accessed in write mode.
+                                             This parameter can be a value of @ref FMC_SDRAM_Write_Protection.   */
+
+  uint32_t SDClockPeriod;               /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow 
+                                             to disable the clock before changing frequency.
+                                             This parameter can be a value of @ref FMC_SDRAM_Clock_Period.       */
+
+  uint32_t ReadBurst;                   /*!< This bit enable the SDRAM controller to anticipate the next read 
+                                             commands during the CAS latency and stores data in the Read FIFO.
+                                             This parameter can be a value of @ref FMC_SDRAM_Read_Burst.         */
+
+  uint32_t ReadPipeDelay;               /*!< Define the delay in system clock cycles on read data path.
+                                             This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay.    */
+}FMC_SDRAM_InitTypeDef;
+
+/** 
+  * @brief FMC SDRAM Timing parameters structure definition
+  */
+typedef struct
+{
+  uint32_t LoadToActiveDelay;            /*!< Defines the delay between a Load Mode Register command and 
+                                              an active or Refresh command in number of memory clock cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+
+  uint32_t ExitSelfRefreshDelay;         /*!< Defines the delay from releasing the self refresh command to 
+                                              issuing the Activate command in number of memory clock cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+
+  uint32_t SelfRefreshTime;              /*!< Defines the minimum Self Refresh period in number of memory clock 
+                                              cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+
+  uint32_t RowCycleDelay;                /*!< Defines the delay between the Refresh command and the Activate command
+                                              and the delay between two consecutive Refresh commands in number of 
+                                              memory clock cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+
+  uint32_t WriteRecoveryTime;            /*!< Defines the Write recovery Time in number of memory clock cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+
+  uint32_t RPDelay;                      /*!< Defines the delay between a Precharge Command and an other command 
+                                              in number of memory clock cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */
+
+  uint32_t RCDDelay;                     /*!< Defines the delay between the Activate Command and a Read/Write 
+                                              command in number of memory clock cycles.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16  */ 
+}FMC_SDRAM_TimingTypeDef;
+
+/** 
+  * @brief SDRAM command parameters structure definition
+  */
+typedef struct
+{
+  uint32_t CommandMode;                  /*!< Defines the command issued to the SDRAM device.
+                                              This parameter can be a value of @ref FMC_SDRAM_Command_Mode.          */
+
+  uint32_t CommandTarget;                /*!< Defines which device (1 or 2) the command will be issued to.
+                                              This parameter can be a value of @ref FMC_SDRAM_Command_Target.        */
+
+  uint32_t AutoRefreshNumber;            /*!< Defines the number of consecutive auto refresh command issued
+                                              in auto refresh mode.
+                                              This parameter can be a value between Min_Data = 1 and Max_Data = 16   */
+  uint32_t ModeRegisterDefinition;       /*!< Defines the SDRAM Mode register content                                */
+}FMC_SDRAM_CommandTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @addtogroup FMC_LL_Exported_Constants FMC Low Layer Exported Constants
+  * @{
+  */
+
+/** @defgroup FMC_LL_NOR_SRAM_Controller FMC NOR/SRAM Controller 
+  * @{
+  */
+
+/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank
+  * @{
+  */
+#define FMC_NORSRAM_BANK1                       ((uint32_t)0x00000000)
+#define FMC_NORSRAM_BANK2                       ((uint32_t)0x00000002)
+#define FMC_NORSRAM_BANK3                       ((uint32_t)0x00000004)
+#define FMC_NORSRAM_BANK4                       ((uint32_t)0x00000006)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing
+  * @{
+  */
+#define FMC_DATA_ADDRESS_MUX_DISABLE            ((uint32_t)0x00000000)
+#define FMC_DATA_ADDRESS_MUX_ENABLE             ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Memory_Type FMC Memory Type
+  * @{
+  */
+#define FMC_MEMORY_TYPE_SRAM                    ((uint32_t)0x00000000)
+#define FMC_MEMORY_TYPE_PSRAM                   ((uint32_t)0x00000004)
+#define FMC_MEMORY_TYPE_NOR                     ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width
+  * @{
+  */
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8             ((uint32_t)0x00000000)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16            ((uint32_t)0x00000010)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32            ((uint32_t)0x00000020)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access
+  * @{
+  */
+#define FMC_NORSRAM_FLASH_ACCESS_ENABLE         ((uint32_t)0x00000040)
+#define FMC_NORSRAM_FLASH_ACCESS_DISABLE        ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode
+  * @{
+  */
+#define FMC_BURST_ACCESS_MODE_DISABLE           ((uint32_t)0x00000000) 
+#define FMC_BURST_ACCESS_MODE_ENABLE            ((uint32_t)0x00000100)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity
+  * @{
+  */
+#define FMC_WAIT_SIGNAL_POLARITY_LOW            ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_POLARITY_HIGH           ((uint32_t)0x00000200)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Wait_Timing FMC Wait Timing
+  * @{
+  */
+#define FMC_WAIT_TIMING_BEFORE_WS               ((uint32_t)0x00000000)
+#define FMC_WAIT_TIMING_DURING_WS               ((uint32_t)0x00000800) 
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Write_Operation FMC Write Operation
+  * @{
+  */
+#define FMC_WRITE_OPERATION_DISABLE             ((uint32_t)0x00000000)
+#define FMC_WRITE_OPERATION_ENABLE              ((uint32_t)0x00001000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Wait_Signal FMC Wait Signal
+  * @{
+  */
+#define FMC_WAIT_SIGNAL_DISABLE                 ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_ENABLE                  ((uint32_t)0x00002000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Extended_Mode FMC Extended Mode
+  * @{
+  */
+#define FMC_EXTENDED_MODE_DISABLE               ((uint32_t)0x00000000)
+#define FMC_EXTENDED_MODE_ENABLE                ((uint32_t)0x00004000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait
+  * @{
+  */
+#define FMC_ASYNCHRONOUS_WAIT_DISABLE           ((uint32_t)0x00000000)
+#define FMC_ASYNCHRONOUS_WAIT_ENABLE            ((uint32_t)0x00008000)
+/**
+  * @}
+  */  
+
+/** @defgroup FMC_Page_Size FMC Page Size
+  * @{
+  */
+#define FMC_PAGE_SIZE_NONE           ((uint32_t)0x00000000)
+#define FMC_PAGE_SIZE_128            ((uint32_t)FMC_BCR1_CPSIZE_0)
+#define FMC_PAGE_SIZE_256            ((uint32_t)FMC_BCR1_CPSIZE_1)
+#define FMC_PAGE_SIZE_512            ((uint32_t)(FMC_BCR1_CPSIZE_0 | FMC_BCR1_CPSIZE_1))
+#define FMC_PAGE_SIZE_1024           ((uint32_t)FMC_BCR1_CPSIZE_2)
+/**
+  * @}
+  */  
+
+/** @defgroup FMC_Write_Burst FMC Write Burst
+  * @{
+  */
+#define FMC_WRITE_BURST_DISABLE                 ((uint32_t)0x00000000)
+#define FMC_WRITE_BURST_ENABLE                  ((uint32_t)0x00080000) 
+/**
+  * @}
+  */
+  
+/** @defgroup FMC_Continous_Clock FMC Continuous Clock
+  * @{
+  */
+#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY          ((uint32_t)0x00000000)
+#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC         ((uint32_t)0x00100000)
+/**
+  * @}
+  */ 
+
+/** @defgroup FMC_Write_FIFO FMC Write FIFO 
+  * @{
+  */
+#define FMC_WRITE_FIFO_DISABLE           ((uint32_t)FMC_BCR1_WFDIS)
+#define FMC_WRITE_FIFO_ENABLE            ((uint32_t)0x00000000)
+/**
+  * @}
+  */
+	
+/** @defgroup FMC_Access_Mode FMC Access Mode 
+  * @{
+  */
+#define FMC_ACCESS_MODE_A                        ((uint32_t)0x00000000)
+#define FMC_ACCESS_MODE_B                        ((uint32_t)0x10000000) 
+#define FMC_ACCESS_MODE_C                        ((uint32_t)0x20000000)
+#define FMC_ACCESS_MODE_D                        ((uint32_t)0x30000000)
+/**
+  * @}
+  */
+    
+/**
+  * @}
+  */ 
+
+/** @defgroup FMC_LL_NAND_Controller FMC NAND Controller 
+  * @{
+  */
+/** @defgroup FMC_NAND_Bank FMC NAND Bank 
+  * @{
+  */
+#define FMC_NAND_BANK3                          ((uint32_t)0x00000100) 
+/**
+  * @}
+  */
+
+/** @defgroup FMC_Wait_feature FMC Wait feature
+  * @{
+  */
+#define FMC_NAND_WAIT_FEATURE_DISABLE           ((uint32_t)0x00000000)
+#define FMC_NAND_WAIT_FEATURE_ENABLE            ((uint32_t)0x00000002)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type 
+  * @{
+  */
+#define FMC_PCR_MEMORY_TYPE_NAND          ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width 
+  * @{
+  */
+#define FMC_NAND_MEM_BUS_WIDTH_8                ((uint32_t)0x00000000)
+#define FMC_NAND_MEM_BUS_WIDTH_16               ((uint32_t)0x00000010)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_ECC FMC ECC 
+  * @{
+  */
+#define FMC_NAND_ECC_DISABLE                    ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_ENABLE                     ((uint32_t)0x00000040)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size 
+  * @{
+  */
+#define FMC_NAND_ECC_PAGE_SIZE_256BYTE          ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_PAGE_SIZE_512BYTE          ((uint32_t)0x00020000)
+#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE         ((uint32_t)0x00040000)
+#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE         ((uint32_t)0x00060000)
+#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE         ((uint32_t)0x00080000)
+#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE         ((uint32_t)0x000A0000)
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */ 
+
+/** @defgroup FMC_LL_SDRAM_Controller FMC SDRAM Controller 
+  * @{
+  */
+/** @defgroup FMC_SDRAM_Bank FMC SDRAM Bank
+  * @{
+  */
+#define FMC_SDRAM_BANK1                       ((uint32_t)0x00000000)
+#define FMC_SDRAM_BANK2                       ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Column_Bits_number FMC SDRAM Column Bits number 
+  * @{
+  */
+#define FMC_SDRAM_COLUMN_BITS_NUM_8           ((uint32_t)0x00000000)
+#define FMC_SDRAM_COLUMN_BITS_NUM_9           ((uint32_t)0x00000001)
+#define FMC_SDRAM_COLUMN_BITS_NUM_10          ((uint32_t)0x00000002)
+#define FMC_SDRAM_COLUMN_BITS_NUM_11          ((uint32_t)0x00000003)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Row_Bits_number FMC SDRAM Row Bits number
+  * @{
+  */
+#define FMC_SDRAM_ROW_BITS_NUM_11             ((uint32_t)0x00000000)
+#define FMC_SDRAM_ROW_BITS_NUM_12             ((uint32_t)0x00000004)
+#define FMC_SDRAM_ROW_BITS_NUM_13             ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Memory_Bus_Width FMC SDRAM Memory Bus Width
+  * @{
+  */
+#define FMC_SDRAM_MEM_BUS_WIDTH_8             ((uint32_t)0x00000000)
+#define FMC_SDRAM_MEM_BUS_WIDTH_16            ((uint32_t)0x00000010)
+#define FMC_SDRAM_MEM_BUS_WIDTH_32            ((uint32_t)0x00000020)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Internal_Banks_Number FMC SDRAM Internal Banks Number
+  * @{
+  */
+#define FMC_SDRAM_INTERN_BANKS_NUM_2          ((uint32_t)0x00000000)
+#define FMC_SDRAM_INTERN_BANKS_NUM_4          ((uint32_t)0x00000040)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_CAS_Latency FMC SDRAM CAS Latency
+  * @{
+  */
+#define FMC_SDRAM_CAS_LATENCY_1               ((uint32_t)0x00000080)
+#define FMC_SDRAM_CAS_LATENCY_2               ((uint32_t)0x00000100)
+#define FMC_SDRAM_CAS_LATENCY_3               ((uint32_t)0x00000180)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Write_Protection FMC SDRAM Write Protection
+  * @{
+  */
+#define FMC_SDRAM_WRITE_PROTECTION_DISABLE    ((uint32_t)0x00000000)
+#define FMC_SDRAM_WRITE_PROTECTION_ENABLE     ((uint32_t)0x00000200)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Clock_Period FMC SDRAM Clock Period
+  * @{
+  */
+#define FMC_SDRAM_CLOCK_DISABLE               ((uint32_t)0x00000000)
+#define FMC_SDRAM_CLOCK_PERIOD_2              ((uint32_t)0x00000800)
+#define FMC_SDRAM_CLOCK_PERIOD_3              ((uint32_t)0x00000C00)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Read_Burst FMC SDRAM Read Burst
+  * @{
+  */
+#define FMC_SDRAM_RBURST_DISABLE              ((uint32_t)0x00000000)
+#define FMC_SDRAM_RBURST_ENABLE               ((uint32_t)0x00001000)
+/**
+  * @}
+  */
+  
+/** @defgroup FMC_SDRAM_Read_Pipe_Delay FMC SDRAM Read Pipe Delay
+  * @{
+  */
+#define FMC_SDRAM_RPIPE_DELAY_0               ((uint32_t)0x00000000)
+#define FMC_SDRAM_RPIPE_DELAY_1               ((uint32_t)0x00002000)
+#define FMC_SDRAM_RPIPE_DELAY_2               ((uint32_t)0x00004000)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Command_Mode FMC SDRAM Command Mode
+  * @{
+  */
+#define FMC_SDRAM_CMD_NORMAL_MODE             ((uint32_t)0x00000000)
+#define FMC_SDRAM_CMD_CLK_ENABLE              ((uint32_t)0x00000001)
+#define FMC_SDRAM_CMD_PALL                    ((uint32_t)0x00000002)
+#define FMC_SDRAM_CMD_AUTOREFRESH_MODE        ((uint32_t)0x00000003)
+#define FMC_SDRAM_CMD_LOAD_MODE               ((uint32_t)0x00000004)
+#define FMC_SDRAM_CMD_SELFREFRESH_MODE        ((uint32_t)0x00000005)
+#define FMC_SDRAM_CMD_POWERDOWN_MODE          ((uint32_t)0x00000006)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Command_Target FMC SDRAM Command Target
+  * @{
+  */
+#define FMC_SDRAM_CMD_TARGET_BANK2            FMC_SDCMR_CTB2
+#define FMC_SDRAM_CMD_TARGET_BANK1            FMC_SDCMR_CTB1
+#define FMC_SDRAM_CMD_TARGET_BANK1_2          ((uint32_t)0x00000018)
+/**
+  * @}
+  */
+
+/** @defgroup FMC_SDRAM_Mode_Status FMC SDRAM Mode Status 
+  * @{
+  */
+#define FMC_SDRAM_NORMAL_MODE                     ((uint32_t)0x00000000)
+#define FMC_SDRAM_SELF_REFRESH_MODE               FMC_SDSR_MODES1_0
+#define FMC_SDRAM_POWER_DOWN_MODE                 FMC_SDSR_MODES1_1
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/** @defgroup FMC_LL_Interrupt_definition FMC Low Layer Interrupt definition  
+  * @{
+  */  
+#define FMC_IT_RISING_EDGE                ((uint32_t)0x00000008)
+#define FMC_IT_LEVEL                      ((uint32_t)0x00000010)
+#define FMC_IT_FALLING_EDGE               ((uint32_t)0x00000020)
+#define FMC_IT_REFRESH_ERROR              ((uint32_t)0x00004000)
+/**
+  * @}
+  */
+    
+/** @defgroup FMC_LL_Flag_definition FMC Low Layer Flag definition 
+  * @{
+  */ 
+#define FMC_FLAG_RISING_EDGE                    ((uint32_t)0x00000001)
+#define FMC_FLAG_LEVEL                          ((uint32_t)0x00000002)
+#define FMC_FLAG_FALLING_EDGE                   ((uint32_t)0x00000004)
+#define FMC_FLAG_FEMPT                          ((uint32_t)0x00000040)
+#define FMC_SDRAM_FLAG_REFRESH_IT               FMC_SDSR_RE
+#define FMC_SDRAM_FLAG_BUSY                     FMC_SDSR_BUSY
+#define FMC_SDRAM_FLAG_REFRESH_ERROR            FMC_SDRTR_CRE
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Macros FMC_LL  Private Macros
+  * @{
+  */
+
+/** @defgroup FMC_LL_NOR_Macros FMC NOR/SRAM Macros
+ *  @brief macros to handle NOR device enable/disable and read/write operations
+ *  @{
+ */
+ 
+/**
+  * @brief  Enable the NORSRAM device access.
+  * @param  __INSTANCE__: FMC_NORSRAM Instance
+  * @param  __BANK__: FMC_NORSRAM Bank     
+  * @retval None
+  */ 
+#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__)  ((__INSTANCE__)->BTCR[(__BANK__)] |= FMC_BCR1_MBKEN)
+
+/**
+  * @brief  Disable the NORSRAM device access.
+  * @param  __INSTANCE__: FMC_NORSRAM Instance
+  * @param  __BANK__: FMC_NORSRAM Bank   
+  * @retval None
+  */ 
+#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FMC_BCR1_MBKEN)  
+
+/**
+  * @}
+  */ 
+
+/** @defgroup FMC_LL_NAND_Macros FMC NAND Macros
+ *  @brief macros to handle NAND device enable/disable
+ *  @{
+ */
+ 
+/**
+  * @brief  Enable the NAND device access.
+  * @param  __INSTANCE__: FMC_NAND Instance    
+  * @retval None
+  */  
+#define __FMC_NAND_ENABLE(__INSTANCE__)  ((__INSTANCE__)->PCR |= FMC_PCR_PBKEN)
+
+/**
+  * @brief  Disable the NAND device access.
+  * @param  __INSTANCE__: FMC_NAND Instance  
+  * @retval None
+  */
+#define __FMC_NAND_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR &= ~FMC_PCR_PBKEN)
+
+/**
+  * @}
+  */ 
+    
+/** @defgroup FMC_Interrupt FMC Interrupt
+ *  @brief macros to handle FMC interrupts
+ * @{
+ */ 
+
+/**
+  * @brief  Enable the NAND device interrupt.
+  * @param  __INSTANCE__:  FMC_NAND instance     
+  * @param  __INTERRUPT__: FMC_NAND interrupt 
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FMC_IT_LEVEL: Interrupt level.
+  *            @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.       
+  * @retval None
+  */  
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->SR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the NAND device interrupt.
+  * @param  __INSTANCE__:  FMC_NAND Instance
+  * @param  __INTERRUPT__: FMC_NAND interrupt
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+  *            @arg FMC_IT_LEVEL: Interrupt level.
+  *            @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.   
+  * @retval None
+  */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->SR &= ~(__INTERRUPT__))
+                                                                                                                           
+/**
+  * @brief  Get flag status of the NAND device.
+  * @param  __INSTANCE__: FMC_NAND Instance
+  * @param  __BANK__:     FMC_NAND Bank     
+  * @param  __FLAG__: FMC_NAND flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg FMC_FLAG_FEMPT: FIFO empty flag.   
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__)  (((__INSTANCE__)->SR &(__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clear flag status of the NAND device.
+  * @param  __INSTANCE__: FMC_NAND Instance   
+  * @param  __FLAG__: FMC_NAND flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+  *            @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+  *            @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+  *            @arg FMC_FLAG_FEMPT: FIFO empty flag.   
+  * @retval None
+  */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __FLAG__)  ((__INSTANCE__)->SR &= ~(__FLAG__))  
+
+/**
+  * @brief  Enable the SDRAM device interrupt.
+  * @param  __INSTANCE__: FMC_SDRAM instance  
+  * @param  __INTERRUPT__: FMC_SDRAM interrupt 
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error      
+  * @retval None
+  */
+#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->SDRTR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the SDRAM device interrupt.
+  * @param  __INSTANCE__: FMC_SDRAM instance  
+  * @param  __INTERRUPT__: FMC_SDRAM interrupt 
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error      
+  * @retval None
+  */
+#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Get flag status of the SDRAM device.
+  * @param  __INSTANCE__: FMC_SDRAM instance  
+  * @param  __FLAG__: FMC_SDRAM flag
+  *         This parameter can be any combination of the following values:
+  *            @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error.
+  *            @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag.
+  *            @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag.
+  * @retval The state of FLAG (SET or RESET).
+  */
+#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__)  (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__))
+
+/**
+  * @brief  Clear flag status of the SDRAM device.
+  * @param  __INSTANCE__: FMC_SDRAM instance  
+  * @param  __FLAG__: FMC_SDRAM flag
+  *         This parameter can be any combination of the following values:
+  *           @arg FMC_SDRAM_FLAG_REFRESH_ERROR
+  * @retval None
+  */
+#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__)  ((__INSTANCE__)->SDRTR |= (__FLAG__))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Functions FMC LL Private Functions
+  *  @{
+  */
+
+/** @defgroup FMC_LL_NORSRAM  NOR SRAM
+  *  @{
+  */
+/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions 
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef  FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef  FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+/**
+  * @}
+  */ 
+
+/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions 
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_NAND NAND
+  *  @{
+  */
+/** @defgroup FMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions 
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef  FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_NAND_Private_Functions_Group2 NAND Control functions 
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_SDRAM SDRAM
+  *  @{
+  */
+/** @defgroup FMC_LL_SDRAM_Private_Functions_Group1 SDRAM Initialization/de-initialization functions 
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init);
+HAL_StatusTypeDef  FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef  FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+
+/**
+  * @}
+  */
+
+/** @defgroup FMC_LL_SDRAM_Private_Functions_Group2 SDRAM Control functions 
+  *  @{
+  */
+HAL_StatusTypeDef  FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef  FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef  FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate);
+HAL_StatusTypeDef  FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber);
+uint32_t           FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_LL_FMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_ll_sdmmc.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,510 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_ll_sdmmc.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   SDMMC Low Layer HAL module driver.
+  *    
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the SDMMC peripheral:
+  *           + Initialization/de-initialization functions
+  *           + I/O operation functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State functions
+  *         
+  @verbatim
+  ==============================================================================
+                       ##### SDMMC peripheral features #####
+  ==============================================================================        
+    [..] The SD/SDMMC MMC card host interface (SDMMC) provides an interface between the APB2
+         peripheral bus and MultiMedia cards (MMCs), SD memory cards, SDMMC cards and CE-ATA
+         devices.
+    
+    [..] The SDMMC features include the following:
+         (+) Full compliance with MultiMedia Card System Specification Version 4.2. Card support
+             for three different databus modes: 1-bit (default), 4-bit and 8-bit
+         (+) Full compatibility with previous versions of MultiMedia Cards (forward compatibility)
+         (+) Full compliance with SD Memory Card Specifications Version 2.0
+         (+) Full compliance with SD I/O Card Specification Version 2.0: card support for two
+             different data bus modes: 1-bit (default) and 4-bit
+         (+) Full support of the CE-ATA features (full compliance with CE-ATA digital protocol
+             Rev1.1)
+         (+) Data transfer up to 48 MHz for the 8 bit mode
+         (+) Data and command output enable signals to control external bidirectional drivers.
+                 
+   
+                           ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      This driver is a considered as a driver of service for external devices drivers 
+      that interfaces with the SDMMC peripheral.
+      According to the device used (SD card/ MMC card / SDMMC card ...), a set of APIs 
+      is used in the device's driver to perform SDMMC operations and functionalities.
+   
+      This driver is almost transparent for the final user, it is only used to implement other
+      functionalities of the external device.
+   
+    [..]
+      (+) The SDMMC clock (SDMMCCLK = 48 MHz) is coming from a specific output of PLL 
+          (PLL48CLK). Before start working with SDMMC peripheral make sure that the
+          PLL is well configured.
+          The SDMMC peripheral uses two clock signals:
+          (++) SDMMC adapter clock (SDMMCCLK = 48 MHz)
+          (++) APB2 bus clock (PCLK2)
+       
+          -@@- PCLK2 and SDMMC_CK clock frequencies must respect the following condition:
+               Frequency(PCLK2) >= (3 / 8 x Frequency(SDMMC_CK))
+  
+      (+) Enable/Disable peripheral clock using RCC peripheral macros related to SDMMC
+          peripheral.
+
+      (+) Enable the Power ON State using the SDMMC_PowerState_ON(SDMMCx) 
+          function and disable it using the function SDMMC_PowerState_OFF(SDMMCx).
+                
+      (+) Enable/Disable the clock using the __SDMMC_ENABLE()/__SDMMC_DISABLE() macros.
+  
+      (+) Enable/Disable the peripheral interrupts using the macros __SDMMC_ENABLE_IT(hSDMMC, IT) 
+          and __SDMMC_DISABLE_IT(hSDMMC, IT) if you need to use interrupt mode. 
+  
+      (+) When using the DMA mode 
+          (++) Configure the DMA in the MSP layer of the external device
+          (++) Active the needed channel Request 
+          (++) Enable the DMA using __SDMMC_DMA_ENABLE() macro or Disable it using the macro
+               __SDMMC_DMA_DISABLE().
+  
+      (+) To control the CPSM (Command Path State Machine) and send 
+          commands to the card use the SDMMC_SendCommand(SDMMCx), 
+          SDMMC_GetCommandResponse() and SDMMC_GetResponse() functions. First, user has
+          to fill the command structure (pointer to SDMMC_CmdInitTypeDef) according 
+          to the selected command to be sent.
+          The parameters that should be filled are:
+           (++) Command Argument
+           (++) Command Index
+           (++) Command Response type
+           (++) Command Wait
+           (++) CPSM Status (Enable or Disable).
+  
+          -@@- To check if the command is well received, read the SDMMC_CMDRESP
+              register using the SDMMC_GetCommandResponse().
+              The SDMMC responses registers (SDMMC_RESP1 to SDMMC_RESP2), use the
+              SDMMC_GetResponse() function.
+  
+      (+) To control the DPSM (Data Path State Machine) and send/receive 
+           data to/from the card use the SDMMC_DataConfig(), SDMMC_GetDataCounter(), 
+          SDMMC_ReadFIFO(), DIO_WriteFIFO() and SDMMC_GetFIFOCount() functions.
+  
+    *** Read Operations ***
+    =======================
+    [..]
+      (#) First, user has to fill the data structure (pointer to
+          SDMMC_DataInitTypeDef) according to the selected data type to be received.
+          The parameters that should be filled are:
+           (++) Data TimeOut
+           (++) Data Length
+           (++) Data Block size
+           (++) Data Transfer direction: should be from card (To SDMMC)
+           (++) Data Transfer mode
+           (++) DPSM Status (Enable or Disable)
+                                     
+      (#) Configure the SDMMC resources to receive the data from the card
+          according to selected transfer mode (Refer to Step 8, 9 and 10).
+  
+      (#) Send the selected Read command (refer to step 11).
+                    
+      (#) Use the SDMMC flags/interrupts to check the transfer status.
+  
+    *** Write Operations ***
+    ========================
+    [..]
+     (#) First, user has to fill the data structure (pointer to
+         SDMMC_DataInitTypeDef) according to the selected data type to be received.
+         The parameters that should be filled are:
+          (++) Data TimeOut
+          (++) Data Length
+          (++) Data Block size
+          (++) Data Transfer direction:  should be to card (To CARD)
+          (++) Data Transfer mode
+          (++) DPSM Status (Enable or Disable)
+  
+     (#) Configure the SDMMC resources to send the data to the card according to 
+         selected transfer mode.
+                     
+     (#) Send the selected Write command.
+                    
+     (#) Use the SDMMC flags/interrupts to check the transfer status.
+  
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup SDMMC_LL SDMMC Low Layer
+  * @brief Low layer module for SD
+  * @{
+  */
+
+#if defined (HAL_SD_MODULE_ENABLED) || defined(HAL_MMC_MODULE_ENABLED)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup SDMMC_LL_Exported_Functions SDMMC Low Layer Exported Functions
+  * @{
+  */
+
+/** @defgroup HAL_SDMMC_LL_Group1 Initialization de-initialization functions 
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+ ===============================================================================
+              ##### Initialization/de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the SDMMC according to the specified
+  *         parameters in the SDMMC_InitTypeDef and create the associated handle.
+  * @param  SDMMCx: Pointer to SDMMC register base
+  * @param  Init: SDMMC initialization structure   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef SDMMC_Init(SDMMC_TypeDef *SDMMCx, SDMMC_InitTypeDef Init)
+{
+  uint32_t tmpreg = 0; 
+
+  /* Check the parameters */
+  assert_param(IS_SDMMC_ALL_INSTANCE(SDMMCx));
+  assert_param(IS_SDMMC_CLOCK_EDGE(Init.ClockEdge)); 
+  assert_param(IS_SDMMC_CLOCK_BYPASS(Init.ClockBypass));
+  assert_param(IS_SDMMC_CLOCK_POWER_SAVE(Init.ClockPowerSave));
+  assert_param(IS_SDMMC_BUS_WIDE(Init.BusWide));
+  assert_param(IS_SDMMC_HARDWARE_FLOW_CONTROL(Init.HardwareFlowControl));
+  assert_param(IS_SDMMC_CLKDIV(Init.ClockDiv));
+  
+  /* Set SDMMC configuration parameters */
+  tmpreg |= (Init.ClockEdge           |\
+             Init.ClockBypass         |\
+             Init.ClockPowerSave      |\
+             Init.BusWide             |\
+             Init.HardwareFlowControl |\
+             Init.ClockDiv
+             ); 
+  
+  /* Write to SDMMC CLKCR */
+  MODIFY_REG(SDMMCx->CLKCR, CLKCR_CLEAR_MASK, tmpreg);  
+
+  return HAL_OK;
+}
+
+
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SDMMC_LL_Group2 IO operation functions 
+ *  @brief   Data transfers functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### I/O operation functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to manage the SDMMC data 
+    transfers.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Read data (word) from Rx FIFO in blocking mode (polling) 
+  * @param  SDMMCx: Pointer to SDMMC register base
+  * @retval HAL status
+  */
+uint32_t SDMMC_ReadFIFO(SDMMC_TypeDef *SDMMCx)
+{
+  /* Read data from Rx FIFO */ 
+  return (SDMMCx->FIFO);
+}
+
+/**
+  * @brief  Write data (word) to Tx FIFO in blocking mode (polling) 
+  * @param  SDMMCx: Pointer to SDMMC register base
+  * @param  pWriteData: pointer to data to write
+  * @retval HAL status
+  */
+HAL_StatusTypeDef SDMMC_WriteFIFO(SDMMC_TypeDef *SDMMCx, uint32_t *pWriteData)
+{ 
+  /* Write data to FIFO */ 
+  SDMMCx->FIFO = *pWriteData;
+
+  return HAL_OK;
+}
+
+/**
+  * @}
+  */
+
+/** @defgroup HAL_SDMMC_LL_Group3 Peripheral Control functions 
+ *  @brief   management functions 
+ *
+@verbatim   
+ ===============================================================================
+                      ##### Peripheral Control functions #####
+ ===============================================================================  
+    [..]
+    This subsection provides a set of functions allowing to control the SDMMC data 
+    transfers.
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Set SDMMC Power state to ON. 
+  * @param  SDMMCx: Pointer to SDMMC register base
+  * @retval HAL status
+  */
+HAL_StatusTypeDef SDMMC_PowerState_ON(SDMMC_TypeDef *SDMMCx)
+{  
+  /* Set power state to ON */ 
+  SDMMCx->POWER = SDMMC_POWER_PWRCTRL;
+  
+  return HAL_OK; 
+}
+
+/**
+  * @brief  Set SDMMC Power state to OFF. 
+  * @param  SDMMCx: Pointer to SDMMC register base
+  * @retval HAL status
+  */
+HAL_StatusTypeDef SDMMC_PowerState_OFF(SDMMC_TypeDef *SDMMCx)
+{
+  /* Set power state to OFF */
+  SDMMCx->POWER = (uint32_t)0x00000000;
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Get SDMMC Power state. 
+  * @param  SDMMCx: Pointer to SDMMC register base
+  * @retval Power status of the controller. The returned value can be one of the 
+  *         following values:
+  *            - 0x00: Power OFF
+  *            - 0x02: Power UP
+  *            - 0x03: Power ON 
+  */
+uint32_t SDMMC_GetPowerState(SDMMC_TypeDef *SDMMCx)  
+{
+  return (SDMMCx->POWER & SDMMC_POWER_PWRCTRL);
+}
+
+/**
+  * @brief  Configure the SDMMC command path according to the specified parameters in
+  *         SDMMC_CmdInitTypeDef structure and send the command 
+  * @param  SDMMCx: Pointer to SDMMC register base
+  * @param  Command: pointer to a SDMMC_CmdInitTypeDef structure that contains 
+  *         the configuration information for the SDMMC command
+  * @retval HAL status
+  */
+HAL_StatusTypeDef SDMMC_SendCommand(SDMMC_TypeDef *SDMMCx, SDMMC_CmdInitTypeDef *Command)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_SDMMC_CMD_INDEX(Command->CmdIndex));
+  assert_param(IS_SDMMC_RESPONSE(Command->Response));
+  assert_param(IS_SDMMC_WAIT(Command->WaitForInterrupt));
+  assert_param(IS_SDMMC_CPSM(Command->CPSM));
+
+  /* Set the SDMMC Argument value */
+  SDMMCx->ARG = Command->Argument;
+
+  /* Set SDMMC command parameters */
+  tmpreg |= (uint32_t)(Command->CmdIndex         |\
+                       Command->Response         |\
+                       Command->WaitForInterrupt |\
+                       Command->CPSM);
+  
+  /* Write to SDMMC CMD register */
+  MODIFY_REG(SDMMCx->CMD, CMD_CLEAR_MASK, tmpreg); 
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Return the command index of last command for which response received
+  * @param  SDMMCx: Pointer to SDMMC register base
+  * @retval Command index of the last command response received
+  */
+uint8_t SDMMC_GetCommandResponse(SDMMC_TypeDef *SDMMCx)
+{
+  return (uint8_t)(SDMMCx->RESPCMD);
+}
+
+
+/**
+  * @brief  Return the response received from the card for the last command
+  * @param  SDMMCx: Pointer to SDMMC register base    
+  * @param  Response: Specifies the SDMMC response register. 
+  *          This parameter can be one of the following values:
+  *            @arg SDMMC_RESP1: Response Register 1
+  *            @arg SDMMC_RESP2: Response Register 2
+  *            @arg SDMMC_RESP3: Response Register 3
+  *            @arg SDMMC_RESP4: Response Register 4  
+  * @retval The Corresponding response register value
+  */
+uint32_t SDMMC_GetResponse(SDMMC_TypeDef *SDMMCx, uint32_t Response)
+{
+  __IO uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_SDMMC_RESP(Response));
+  
+  /* Get the response */
+  tmp = (uint32_t)&(SDMMCx->RESP1) + Response;
+  
+  return (*(__IO uint32_t *) tmp);
+}  
+
+/**
+  * @brief  Configure the SDMMC data path according to the specified 
+  *         parameters in the SDMMC_DataInitTypeDef.
+  * @param  SDMMCx: Pointer to SDMMC register base  
+  * @param  Data : pointer to a SDMMC_DataInitTypeDef structure 
+  *         that contains the configuration information for the SDMMC data.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef SDMMC_DataConfig(SDMMC_TypeDef *SDMMCx, SDMMC_DataInitTypeDef* Data)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_SDMMC_DATA_LENGTH(Data->DataLength));
+  assert_param(IS_SDMMC_BLOCK_SIZE(Data->DataBlockSize));
+  assert_param(IS_SDMMC_TRANSFER_DIR(Data->TransferDir));
+  assert_param(IS_SDMMC_TRANSFER_MODE(Data->TransferMode));
+  assert_param(IS_SDMMC_DPSM(Data->DPSM));
+
+  /* Set the SDMMC Data TimeOut value */
+  SDMMCx->DTIMER = Data->DataTimeOut;
+
+  /* Set the SDMMC DataLength value */
+  SDMMCx->DLEN = Data->DataLength;
+
+  /* Set the SDMMC data configuration parameters */
+  tmpreg |= (uint32_t)(Data->DataBlockSize |\
+                       Data->TransferDir   |\
+                       Data->TransferMode  |\
+                       Data->DPSM);
+  
+  /* Write to SDMMC DCTRL */
+  MODIFY_REG(SDMMCx->DCTRL, DCTRL_CLEAR_MASK, tmpreg);
+
+  return HAL_OK;
+
+}
+
+/**
+  * @brief  Returns number of remaining data bytes to be transferred.
+  * @param  SDMMCx: Pointer to SDMMC register base
+  * @retval Number of remaining data bytes to be transferred
+  */
+uint32_t SDMMC_GetDataCounter(SDMMC_TypeDef *SDMMCx)
+{
+  return (SDMMCx->DCOUNT);
+}
+
+/**
+  * @brief  Get the FIFO data
+  * @param  SDMMCx: Pointer to SDMMC register base 
+  * @retval Data received
+  */
+uint32_t SDMMC_GetFIFOCount(SDMMC_TypeDef *SDMMCx)
+{
+  return (SDMMCx->FIFO);
+}
+
+
+/**
+  * @brief  Sets one of the two options of inserting read wait interval.
+  * @param  SDMMCx: Pointer to SDMMC register base   
+  * @param  SDMMC_ReadWaitMode: SDMMC Read Wait operation mode.
+  *          This parameter can be:
+  *            @arg SDMMC_READ_WAIT_MODE_CLK: Read Wait control by stopping SDMMCCLK
+  *            @arg SDMMC_READ_WAIT_MODE_DATA2: Read Wait control using SDMMC_DATA2
+  * @retval None
+  */
+HAL_StatusTypeDef SDMMC_SetSDMMCReadWaitMode(SDMMC_TypeDef *SDMMCx, uint32_t SDMMC_ReadWaitMode)
+{
+  /* Check the parameters */
+  assert_param(IS_SDMMC_READWAIT_MODE(SDMMC_ReadWaitMode));
+  
+  /* Set SDMMC read wait mode */
+  MODIFY_REG(SDMMCx->DCTRL, SDMMC_DCTRL_RWMOD, SDMMC_ReadWaitMode);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* (HAL_SD_MODULE_ENABLED) || (HAL_MMC_MODULE_ENABLED) */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_ll_sdmmc.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,804 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_ll_sdmmc.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of SDMMC HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_SDMMC_H
+#define __STM32F7xx_LL_SDMMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_Driver
+  * @{
+  */
+
+/** @addtogroup SDMMC_LL
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types
+  * @{
+  */
+  
+/** 
+  * @brief  SDMMC Configuration Structure definition  
+  */
+typedef struct
+{
+  uint32_t ClockEdge;            /*!< Specifies the clock transition on which the bit capture is made.
+                                      This parameter can be a value of @ref SDMMC_LL_Clock_Edge                 */
+
+  uint32_t ClockBypass;          /*!< Specifies whether the SDMMC Clock divider bypass is
+                                      enabled or disabled.
+                                      This parameter can be a value of @ref SDMMC_LL_Clock_Bypass               */
+
+  uint32_t ClockPowerSave;       /*!< Specifies whether SDMMC Clock output is enabled or
+                                      disabled when the bus is idle.
+                                      This parameter can be a value of @ref SDMMC_LL_Clock_Power_Save           */
+
+  uint32_t BusWide;              /*!< Specifies the SDMMC bus width.
+                                      This parameter can be a value of @ref SDMMC_LL_Bus_Wide                   */
+
+  uint32_t HardwareFlowControl;  /*!< Specifies whether the SDMMC hardware flow control is enabled or disabled.
+                                      This parameter can be a value of @ref SDMMC_LL_Hardware_Flow_Control      */
+
+  uint32_t ClockDiv;             /*!< Specifies the clock frequency of the SDMMC controller.
+                                      This parameter can be a value between Min_Data = 0 and Max_Data = 255 */  
+  
+}SDMMC_InitTypeDef;
+  
+
+/** 
+  * @brief  SDMMC Command Control structure 
+  */
+typedef struct                                                                                            
+{
+  uint32_t Argument;            /*!< Specifies the SDMMC command argument which is sent
+                                     to a card as part of a command message. If a command
+                                     contains an argument, it must be loaded into this register
+                                     before writing the command to the command register.              */
+
+  uint32_t CmdIndex;            /*!< Specifies the SDMMC command index. It must be Min_Data = 0 and 
+                                     Max_Data = 64                                                    */
+
+  uint32_t Response;            /*!< Specifies the SDMMC response type.
+                                     This parameter can be a value of @ref SDMMC_LL_Response_Type         */
+
+  uint32_t WaitForInterrupt;    /*!< Specifies whether SDMMC wait for interrupt request is 
+                                     enabled or disabled.
+                                     This parameter can be a value of @ref SDMMC_LL_Wait_Interrupt_State  */
+
+  uint32_t CPSM;                /*!< Specifies whether SDMMC Command path state machine (CPSM)
+                                     is enabled or disabled.
+                                     This parameter can be a value of @ref SDMMC_LL_CPSM_State            */
+}SDMMC_CmdInitTypeDef;
+
+
+/** 
+  * @brief  SDMMC Data Control structure 
+  */
+typedef struct
+{
+  uint32_t DataTimeOut;         /*!< Specifies the data timeout period in card bus clock periods.  */
+
+  uint32_t DataLength;          /*!< Specifies the number of data bytes to be transferred.         */
+ 
+  uint32_t DataBlockSize;       /*!< Specifies the data block size for block transfer.
+                                     This parameter can be a value of @ref SDMMC_LL_Data_Block_Size    */
+ 
+  uint32_t TransferDir;         /*!< Specifies the data transfer direction, whether the transfer
+                                     is a read or write.
+                                     This parameter can be a value of @ref SDMMC_LL_Transfer_Direction */
+ 
+  uint32_t TransferMode;        /*!< Specifies whether data transfer is in stream or block mode.
+                                     This parameter can be a value of @ref SDMMC_LL_Transfer_Type      */
+ 
+  uint32_t DPSM;                /*!< Specifies whether SDMMC Data path state machine (DPSM)
+                                     is enabled or disabled.
+                                     This parameter can be a value of @ref SDMMC_LL_DPSM_State         */
+}SDMMC_DataInitTypeDef;
+
+/**
+  * @}
+  */
+  
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants
+  * @{
+  */
+
+/** @defgroup SDMMC_LL_Clock_Edge Clock Edge
+  * @{
+  */
+#define SDMMC_CLOCK_EDGE_RISING               ((uint32_t)0x00000000)
+#define SDMMC_CLOCK_EDGE_FALLING              SDMMC_CLKCR_NEGEDGE
+
+#define IS_SDMMC_CLOCK_EDGE(EDGE) (((EDGE) == SDMMC_CLOCK_EDGE_RISING) || \
+                                  ((EDGE) == SDMMC_CLOCK_EDGE_FALLING))
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Clock_Bypass Clock Bypass
+  * @{
+  */
+#define SDMMC_CLOCK_BYPASS_DISABLE             ((uint32_t)0x00000000)
+#define SDMMC_CLOCK_BYPASS_ENABLE              SDMMC_CLKCR_BYPASS   
+
+#define IS_SDMMC_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDMMC_CLOCK_BYPASS_DISABLE) || \
+                                      ((BYPASS) == SDMMC_CLOCK_BYPASS_ENABLE))
+/**
+  * @}
+  */ 
+
+/** @defgroup SDMMC_LL_Clock_Power_Save Clock Power Saving
+  * @{
+  */
+#define SDMMC_CLOCK_POWER_SAVE_DISABLE         ((uint32_t)0x00000000)
+#define SDMMC_CLOCK_POWER_SAVE_ENABLE          SDMMC_CLKCR_PWRSAV
+
+#define IS_SDMMC_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDMMC_CLOCK_POWER_SAVE_DISABLE) || \
+                                        ((SAVE) == SDMMC_CLOCK_POWER_SAVE_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Bus_Wide Bus Width
+  * @{
+  */
+#define SDMMC_BUS_WIDE_1B                      ((uint32_t)0x00000000)
+#define SDMMC_BUS_WIDE_4B                      SDMMC_CLKCR_WIDBUS_0
+#define SDMMC_BUS_WIDE_8B                      SDMMC_CLKCR_WIDBUS_1
+
+#define IS_SDMMC_BUS_WIDE(WIDE) (((WIDE) == SDMMC_BUS_WIDE_1B) || \
+                                ((WIDE) == SDMMC_BUS_WIDE_4B) || \
+                                ((WIDE) == SDMMC_BUS_WIDE_8B))
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Hardware_Flow_Control Hardware Flow Control
+  * @{
+  */
+#define SDMMC_HARDWARE_FLOW_CONTROL_DISABLE    ((uint32_t)0x00000000)
+#define SDMMC_HARDWARE_FLOW_CONTROL_ENABLE     SDMMC_CLKCR_HWFC_EN
+
+#define IS_SDMMC_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDMMC_HARDWARE_FLOW_CONTROL_DISABLE) || \
+                                                ((CONTROL) == SDMMC_HARDWARE_FLOW_CONTROL_ENABLE))
+/**
+  * @}
+  */
+  
+/** @defgroup SDMMC_LL_Clock_Division Clock Division
+  * @{
+  */
+#define IS_SDMMC_CLKDIV(DIV)   ((DIV) <= 0xFF)
+/**
+  * @}
+  */  
+    
+/** @defgroup SDMMC_LL_Command_Index Command Index
+  * @{
+  */
+#define IS_SDMMC_CMD_INDEX(INDEX)            ((INDEX) < 0x40)
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Response_Type Response Type
+  * @{
+  */
+#define SDMMC_RESPONSE_NO                    ((uint32_t)0x00000000)
+#define SDMMC_RESPONSE_SHORT                 SDMMC_CMD_WAITRESP_0
+#define SDMMC_RESPONSE_LONG                  SDMMC_CMD_WAITRESP
+
+#define IS_SDMMC_RESPONSE(RESPONSE) (((RESPONSE) == SDMMC_RESPONSE_NO)    || \
+                                    ((RESPONSE) == SDMMC_RESPONSE_SHORT) || \
+                                    ((RESPONSE) == SDMMC_RESPONSE_LONG))
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Wait_Interrupt_State Wait Interrupt
+  * @{
+  */
+#define SDMMC_WAIT_NO                        ((uint32_t)0x00000000)
+#define SDMMC_WAIT_IT                        SDMMC_CMD_WAITINT 
+#define SDMMC_WAIT_PEND                      SDMMC_CMD_WAITPEND
+
+#define IS_SDMMC_WAIT(WAIT) (((WAIT) == SDMMC_WAIT_NO) || \
+                            ((WAIT) == SDMMC_WAIT_IT) || \
+                            ((WAIT) == SDMMC_WAIT_PEND))
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_CPSM_State CPSM State
+  * @{
+  */
+#define SDMMC_CPSM_DISABLE                   ((uint32_t)0x00000000)
+#define SDMMC_CPSM_ENABLE                    SDMMC_CMD_CPSMEN
+
+#define IS_SDMMC_CPSM(CPSM) (((CPSM) == SDMMC_CPSM_DISABLE) || \
+                            ((CPSM) == SDMMC_CPSM_ENABLE))
+/**
+  * @}
+  */  
+
+/** @defgroup SDMMC_LL_Response_Registers Response Register
+  * @{
+  */
+#define SDMMC_RESP1                          ((uint32_t)0x00000000)
+#define SDMMC_RESP2                          ((uint32_t)0x00000004)
+#define SDMMC_RESP3                          ((uint32_t)0x00000008)
+#define SDMMC_RESP4                          ((uint32_t)0x0000000C)
+
+#define IS_SDMMC_RESP(RESP) (((RESP) == SDMMC_RESP1) || \
+                            ((RESP) == SDMMC_RESP2) || \
+                            ((RESP) == SDMMC_RESP3) || \
+                            ((RESP) == SDMMC_RESP4))
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Data_Length Data Lenght
+  * @{
+  */
+#define IS_SDMMC_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Data_Block_Size  Data Block Size
+  * @{
+  */
+#define SDMMC_DATABLOCK_SIZE_1B               ((uint32_t)0x00000000)
+#define SDMMC_DATABLOCK_SIZE_2B               SDMMC_DCTRL_DBLOCKSIZE_0
+#define SDMMC_DATABLOCK_SIZE_4B               SDMMC_DCTRL_DBLOCKSIZE_1
+#define SDMMC_DATABLOCK_SIZE_8B               (SDMMC_DCTRL_DBLOCKSIZE_0|SDMMC_DCTRL_DBLOCKSIZE_1)
+#define SDMMC_DATABLOCK_SIZE_16B              SDMMC_DCTRL_DBLOCKSIZE_2
+#define SDMMC_DATABLOCK_SIZE_32B              (SDMMC_DCTRL_DBLOCKSIZE_0|SDMMC_DCTRL_DBLOCKSIZE_2)
+#define SDMMC_DATABLOCK_SIZE_64B              (SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_2)
+#define SDMMC_DATABLOCK_SIZE_128B             (SDMMC_DCTRL_DBLOCKSIZE_0|SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_2)
+#define SDMMC_DATABLOCK_SIZE_256B             SDMMC_DCTRL_DBLOCKSIZE_3
+#define SDMMC_DATABLOCK_SIZE_512B             (SDMMC_DCTRL_DBLOCKSIZE_0|SDMMC_DCTRL_DBLOCKSIZE_3)
+#define SDMMC_DATABLOCK_SIZE_1024B            (SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_3)
+#define SDMMC_DATABLOCK_SIZE_2048B            (SDMMC_DCTRL_DBLOCKSIZE_0|SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_3) 
+#define SDMMC_DATABLOCK_SIZE_4096B            (SDMMC_DCTRL_DBLOCKSIZE_2|SDMMC_DCTRL_DBLOCKSIZE_3)
+#define SDMMC_DATABLOCK_SIZE_8192B            (SDMMC_DCTRL_DBLOCKSIZE_0|SDMMC_DCTRL_DBLOCKSIZE_2|SDMMC_DCTRL_DBLOCKSIZE_3)
+#define SDMMC_DATABLOCK_SIZE_16384B           (SDMMC_DCTRL_DBLOCKSIZE_1|SDMMC_DCTRL_DBLOCKSIZE_2|SDMMC_DCTRL_DBLOCKSIZE_3)
+
+#define IS_SDMMC_BLOCK_SIZE(SIZE) (((SIZE) == SDMMC_DATABLOCK_SIZE_1B)    || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_2B)    || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_4B)    || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_8B)    || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_16B)   || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_32B)   || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_64B)   || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_128B)  || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_256B)  || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_512B)  || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_1024B) || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_2048B) || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_4096B) || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_8192B) || \
+                                  ((SIZE) == SDMMC_DATABLOCK_SIZE_16384B)) 
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Transfer_Direction Transfer Direction
+  * @{
+  */
+#define SDMMC_TRANSFER_DIR_TO_CARD            ((uint32_t)0x00000000)
+#define SDMMC_TRANSFER_DIR_TO_SDMMC            SDMMC_DCTRL_DTDIR
+
+#define IS_SDMMC_TRANSFER_DIR(DIR) (((DIR) == SDMMC_TRANSFER_DIR_TO_CARD) || \
+                                   ((DIR) == SDMMC_TRANSFER_DIR_TO_SDMMC))
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Transfer_Type Transfer Type
+  * @{
+  */
+#define SDMMC_TRANSFER_MODE_BLOCK             ((uint32_t)0x00000000)
+#define SDMMC_TRANSFER_MODE_STREAM            SDMMC_DCTRL_DTMODE
+
+#define IS_SDMMC_TRANSFER_MODE(MODE) (((MODE) == SDMMC_TRANSFER_MODE_BLOCK) || \
+                                     ((MODE) == SDMMC_TRANSFER_MODE_STREAM))
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_DPSM_State DPSM State
+  * @{
+  */
+#define SDMMC_DPSM_DISABLE                    ((uint32_t)0x00000000)
+#define SDMMC_DPSM_ENABLE                     SDMMC_DCTRL_DTEN
+
+#define IS_SDMMC_DPSM(DPSM) (((DPSM) == SDMMC_DPSM_DISABLE) ||\
+                            ((DPSM) == SDMMC_DPSM_ENABLE))
+/**
+  * @}
+  */
+  
+/** @defgroup SDMMC_LL_Read_Wait_Mode Read Wait Mode
+  * @{
+  */
+#define SDMMC_READ_WAIT_MODE_DATA2                ((uint32_t)0x00000000)
+#define SDMMC_READ_WAIT_MODE_CLK                  (SDMMC_DCTRL_RWMOD)
+
+#define IS_SDMMC_READWAIT_MODE(MODE) (((MODE) == SDMMC_READ_WAIT_MODE_CLK) || \
+                                     ((MODE) == SDMMC_READ_WAIT_MODE_DATA2))
+/**
+  * @}
+  */  
+
+/** @defgroup SDMMC_LL_Interrupt_sources Interrupt Sources
+  * @{
+  */
+#define SDMMC_IT_CCRCFAIL                    SDMMC_STA_CCRCFAIL
+#define SDMMC_IT_DCRCFAIL                    SDMMC_STA_DCRCFAIL
+#define SDMMC_IT_CTIMEOUT                    SDMMC_STA_CTIMEOUT
+#define SDMMC_IT_DTIMEOUT                    SDMMC_STA_DTIMEOUT
+#define SDMMC_IT_TXUNDERR                    SDMMC_STA_TXUNDERR
+#define SDMMC_IT_RXOVERR                     SDMMC_STA_RXOVERR
+#define SDMMC_IT_CMDREND                     SDMMC_STA_CMDREND
+#define SDMMC_IT_CMDSENT                     SDMMC_STA_CMDSENT
+#define SDMMC_IT_DATAEND                     SDMMC_STA_DATAEND
+#define SDMMC_IT_DBCKEND                     SDMMC_STA_DBCKEND
+#define SDMMC_IT_CMDACT                      SDMMC_STA_CMDACT
+#define SDMMC_IT_TXACT                       SDMMC_STA_TXACT
+#define SDMMC_IT_RXACT                       SDMMC_STA_RXACT
+#define SDMMC_IT_TXFIFOHE                    SDMMC_STA_TXFIFOHE
+#define SDMMC_IT_RXFIFOHF                    SDMMC_STA_RXFIFOHF
+#define SDMMC_IT_TXFIFOF                     SDMMC_STA_TXFIFOF
+#define SDMMC_IT_RXFIFOF                     SDMMC_STA_RXFIFOF
+#define SDMMC_IT_TXFIFOE                     SDMMC_STA_TXFIFOE
+#define SDMMC_IT_RXFIFOE                     SDMMC_STA_RXFIFOE
+#define SDMMC_IT_TXDAVL                      SDMMC_STA_TXDAVL
+#define SDMMC_IT_RXDAVL                      SDMMC_STA_RXDAVL
+#define SDMMC_IT_SDIOIT                      SDMMC_STA_SDIOIT
+/**
+  * @}
+  */ 
+
+/** @defgroup SDMMC_LL_Flags Flags
+  * @{
+  */
+#define SDMMC_FLAG_CCRCFAIL                  SDMMC_STA_CCRCFAIL
+#define SDMMC_FLAG_DCRCFAIL                  SDMMC_STA_DCRCFAIL
+#define SDMMC_FLAG_CTIMEOUT                  SDMMC_STA_CTIMEOUT
+#define SDMMC_FLAG_DTIMEOUT                  SDMMC_STA_DTIMEOUT
+#define SDMMC_FLAG_TXUNDERR                  SDMMC_STA_TXUNDERR
+#define SDMMC_FLAG_RXOVERR                   SDMMC_STA_RXOVERR
+#define SDMMC_FLAG_CMDREND                   SDMMC_STA_CMDREND
+#define SDMMC_FLAG_CMDSENT                   SDMMC_STA_CMDSENT
+#define SDMMC_FLAG_DATAEND                   SDMMC_STA_DATAEND
+#define SDMMC_FLAG_DBCKEND                   SDMMC_STA_DBCKEND
+#define SDMMC_FLAG_CMDACT                    SDMMC_STA_CMDACT
+#define SDMMC_FLAG_TXACT                     SDMMC_STA_TXACT
+#define SDMMC_FLAG_RXACT                     SDMMC_STA_RXACT
+#define SDMMC_FLAG_TXFIFOHE                  SDMMC_STA_TXFIFOHE
+#define SDMMC_FLAG_RXFIFOHF                  SDMMC_STA_RXFIFOHF
+#define SDMMC_FLAG_TXFIFOF                   SDMMC_STA_TXFIFOF
+#define SDMMC_FLAG_RXFIFOF                   SDMMC_STA_RXFIFOF
+#define SDMMC_FLAG_TXFIFOE                   SDMMC_STA_TXFIFOE
+#define SDMMC_FLAG_RXFIFOE                   SDMMC_STA_RXFIFOE
+#define SDMMC_FLAG_TXDAVL                    SDMMC_STA_TXDAVL
+#define SDMMC_FLAG_RXDAVL                    SDMMC_STA_RXDAVL
+#define SDMMC_FLAG_SDIOIT                    SDMMC_STA_SDIOIT
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros
+  * @{
+  */
+  
+/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions
+  * @brief SDMMC_LL registers bit address in the alias region
+  * @{
+  */
+/* ---------------------- SDMMC registers bit mask --------------------------- */
+/* --- CLKCR Register ---*/
+/* CLKCR register clear mask */ 
+#define CLKCR_CLEAR_MASK         ((uint32_t)(SDMMC_CLKCR_CLKDIV  | SDMMC_CLKCR_PWRSAV |\
+                                             SDMMC_CLKCR_BYPASS  | SDMMC_CLKCR_WIDBUS |\
+                                             SDMMC_CLKCR_NEGEDGE | SDMMC_CLKCR_HWFC_EN))
+
+/* --- DCTRL Register ---*/
+/* SDMMC DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK         ((uint32_t)(SDMMC_DCTRL_DTEN    | SDMMC_DCTRL_DTDIR |\
+                                             SDMMC_DCTRL_DTMODE  | SDMMC_DCTRL_DBLOCKSIZE))
+
+/* --- CMD Register ---*/
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK           ((uint32_t)(SDMMC_CMD_CMDINDEX | SDMMC_CMD_WAITRESP |\
+                                             SDMMC_CMD_WAITINT  | SDMMC_CMD_WAITPEND |\
+                                             SDMMC_CMD_CPSMEN   | SDMMC_CMD_SDIOSUSPEND))
+
+/* SDMMC Initialization Frequency (400KHz max) */
+#define SDMMC_INIT_CLK_DIV ((uint8_t)0x76)
+
+/* SDMMC Data Transfer Frequency (25MHz max) */
+#define SDMMC_TRANSFER_CLK_DIV ((uint8_t)0x0)
+
+/**
+  * @}
+  */
+
+/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+ 
+/**
+  * @brief  Enable the SDMMC device.
+  * @param  __INSTANCE__: SDMMC Instance  
+  * @retval None
+  */ 
+#define __SDMMC_ENABLE(__INSTANCE__)  ((__INSTANCE__)->CLKCR |= SDMMC_CLKCR_CLKEN)
+
+/**
+  * @brief  Disable the SDMMC device.
+  * @param  __INSTANCE__: SDMMC Instance  
+  * @retval None
+  */
+#define __SDMMC_DISABLE(__INSTANCE__)  ((__INSTANCE__)->CLKCR &= ~SDMMC_CLKCR_CLKEN)
+
+/**
+  * @brief  Enable the SDMMC DMA transfer.
+  * @param  __INSTANCE__: SDMMC Instance  
+  * @retval None
+  */ 
+#define __SDMMC_DMA_ENABLE(__INSTANCE__)  ((__INSTANCE__)->DCTRL |= SDMMC_DCTRL_DMAEN)
+/**
+  * @brief  Disable the SDMMC DMA transfer.
+  * @param  __INSTANCE__: SDMMC Instance   
+  * @retval None
+  */
+#define __SDMMC_DMA_DISABLE(__INSTANCE__)  ((__INSTANCE__)->DCTRL &= ~SDMMC_DCTRL_DMAEN)
+ 
+/**
+  * @brief  Enable the SDMMC device interrupt.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base  
+  * @param  __INTERRUPT__ : specifies the SDMMC interrupt sources to be enabled.
+  *         This parameter can be one or a combination of the following values:
+  *            @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDMMC_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDMMC_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDMMC_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDMMC_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDMMC_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDMMC_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDMMC_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDMMC_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDMMC_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDMMC_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDMMC_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDMMC_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDMMC_IT_SDIOIT:   SD I/O interrupt received interrupt   
+  * @retval None
+  */
+#define __SDMMC_ENABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->MASK |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the SDMMC device interrupt.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base   
+  * @param  __INTERRUPT__ : specifies the SDMMC interrupt sources to be disabled.
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDMMC_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDMMC_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDMMC_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDMMC_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDMMC_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDMMC_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDMMC_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDMMC_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDMMC_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDMMC_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDMMC_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDMMC_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDMMC_IT_SDIOIT:   SD I/O interrupt received interrupt   
+  * @retval None
+  */
+#define __SDMMC_DISABLE_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->MASK &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Checks whether the specified SDMMC flag is set or not. 
+  * @param  __INSTANCE__ : Pointer to SDMMC register base   
+  * @param  __FLAG__: specifies the flag to check. 
+  *          This parameter can be one of the following values:
+  *            @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *            @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *            @arg SDMMC_FLAG_CTIMEOUT: Command response timeout
+  *            @arg SDMMC_FLAG_DTIMEOUT: Data timeout
+  *            @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *            @arg SDMMC_FLAG_RXOVERR:  Received FIFO overrun error
+  *            @arg SDMMC_FLAG_CMDREND:  Command response received (CRC check passed)
+  *            @arg SDMMC_FLAG_CMDSENT:  Command sent (no response required)
+  *            @arg SDMMC_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *            @arg SDMMC_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *            @arg SDMMC_FLAG_CMDACT:   Command transfer in progress
+  *            @arg SDMMC_FLAG_TXACT:    Data transmit in progress
+  *            @arg SDMMC_FLAG_RXACT:    Data receive in progress
+  *            @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+  *            @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full
+  *            @arg SDMMC_FLAG_TXFIFOF:  Transmit FIFO full
+  *            @arg SDMMC_FLAG_RXFIFOF:  Receive FIFO full
+  *            @arg SDMMC_FLAG_TXFIFOE:  Transmit FIFO empty
+  *            @arg SDMMC_FLAG_RXFIFOE:  Receive FIFO empty
+  *            @arg SDMMC_FLAG_TXDAVL:   Data available in transmit FIFO
+  *            @arg SDMMC_FLAG_RXDAVL:   Data available in receive FIFO
+  *            @arg SDMMC_FLAG_SDMMCIT:   SD I/O interrupt received
+  * @retval The new state of SDMMC_FLAG (SET or RESET).
+  */
+#define __SDMMC_GET_FLAG(__INSTANCE__, __FLAG__)  (((__INSTANCE__)->STA &(__FLAG__)) != RESET)
+
+
+/**
+  * @brief  Clears the SDMMC pending flags.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base  
+  * @param  __FLAG__: specifies the flag to clear.  
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *            @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *            @arg SDMMC_FLAG_CTIMEOUT: Command response timeout
+  *            @arg SDMMC_FLAG_DTIMEOUT: Data timeout
+  *            @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *            @arg SDMMC_FLAG_RXOVERR:  Received FIFO overrun error
+  *            @arg SDMMC_FLAG_CMDREND:  Command response received (CRC check passed)
+  *            @arg SDMMC_FLAG_CMDSENT:  Command sent (no response required)
+  *            @arg SDMMC_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *            @arg SDMMC_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *            @arg SDMMC_FLAG_SDMMCIT:   SD I/O interrupt received
+  * @retval None
+  */
+#define __SDMMC_CLEAR_FLAG(__INSTANCE__, __FLAG__)  ((__INSTANCE__)->ICR = (__FLAG__))
+
+/**
+  * @brief  Checks whether the specified SDMMC interrupt has occurred or not.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base   
+  * @param  __INTERRUPT__: specifies the SDMMC interrupt source to check. 
+  *          This parameter can be one of the following values:
+  *            @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDMMC_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDMMC_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDMMC_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *            @arg SDMMC_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDACT:   Command transfer in progress interrupt
+  *            @arg SDMMC_IT_TXACT:    Data transmit in progress interrupt
+  *            @arg SDMMC_IT_RXACT:    Data receive in progress interrupt
+  *            @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *            @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *            @arg SDMMC_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *            @arg SDMMC_IT_RXFIFOF:  Receive FIFO full interrupt
+  *            @arg SDMMC_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *            @arg SDMMC_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *            @arg SDMMC_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *            @arg SDMMC_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *            @arg SDMMC_IT_SDIOIT:   SD I/O interrupt received interrupt
+  * @retval The new state of SDMMC_IT (SET or RESET).
+  */
+#define __SDMMC_GET_IT  (__INSTANCE__, __INTERRUPT__)  (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+  * @brief  Clears the SDMMC's interrupt pending bits.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base 
+  * @param  __INTERRUPT__: specifies the interrupt pending bit to clear. 
+  *          This parameter can be one or a combination of the following values:
+  *            @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *            @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+  *            @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+  *            @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *            @arg SDMMC_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *            @arg SDMMC_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *            @arg SDMMC_IT_CMDSENT:  Command sent (no response required) interrupt
+  *            @arg SDMMC_IT_DATAEND:  Data end (data counter, SDMMC_DCOUNT, is zero) interrupt
+  *            @arg SDMMC_IT_SDIOIT:   SD I/O interrupt received interrupt
+  * @retval None
+  */
+#define __SDMMC_CLEAR_IT(__INSTANCE__, __INTERRUPT__)  ((__INSTANCE__)->ICR = (__INTERRUPT__))
+
+/**
+  * @brief  Enable Start the SD I/O Read Wait operation.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base  
+  * @retval None
+  */  
+#define __SDMMC_START_READWAIT_ENABLE(__INSTANCE__)  ((__INSTANCE__)->DCTRL |= SDMMC_DCTRL_RWSTART)
+
+/**
+  * @brief  Disable Start the SD I/O Read Wait operations.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base   
+  * @retval None
+  */  
+#define __SDMMC_START_READWAIT_DISABLE(__INSTANCE__)  ((__INSTANCE__)->DCTRL &= ~SDMMC_DCTRL_RWSTART)
+
+/**
+  * @brief  Enable Start the SD I/O Read Wait operation.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base   
+  * @retval None
+  */  
+#define __SDMMC_STOP_READWAIT_ENABLE(__INSTANCE__)  ((__INSTANCE__)->DCTRL |= SDMMC_DCTRL_RWSTOP)
+
+/**
+  * @brief  Disable Stop the SD I/O Read Wait operations.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base  
+  * @retval None
+  */  
+#define __SDMMC_STOP_READWAIT_DISABLE(__INSTANCE__)  ((__INSTANCE__)->DCTRL &= ~SDMMC_DCTRL_RWSTOP)
+
+/**
+  * @brief  Enable the SD I/O Mode Operation.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base   
+  * @retval None
+  */  
+#define __SDMMC_OPERATION_ENABLE(__INSTANCE__)  ((__INSTANCE__)->DCTRL |= SDMMC_DCTRL_SDIOEN) 
+
+/**
+  * @brief  Disable the SD I/O Mode Operation.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base 
+  * @retval None
+  */  
+#define __SDMMC_OPERATION_DISABLE(__INSTANCE__)  ((__INSTANCE__)->DCTRL &= ~SDMMC_DCTRL_SDIOEN) 
+
+/**
+  * @brief  Enable the SD I/O Suspend command sending.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base  
+  * @retval None
+  */  
+#define __SDMMC_SUSPEND_CMD_ENABLE(__INSTANCE__)  ((__INSTANCE__)->CMD |= SDMMC_CMD_SDIOSUSPEND) 
+
+/**
+  * @brief  Disable the SD I/O Suspend command sending.
+  * @param  __INSTANCE__ : Pointer to SDMMC register base  
+  * @retval None
+  */  
+#define __SDMMC_SUSPEND_CMD_DISABLE(__INSTANCE__)  ((__INSTANCE__)->CMD &= ~SDMMC_CMD_SDIOSUSPEND) 
+      
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */  
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDMMC_LL_Exported_Functions
+  * @{
+  */
+  
+/* Initialization/de-initialization functions  **********************************/
+/** @addtogroup HAL_SDMMC_LL_Group1
+  * @{
+  */
+HAL_StatusTypeDef SDMMC_Init(SDMMC_TypeDef *SDMMCx, SDMMC_InitTypeDef Init);
+/**
+  * @}
+  */
+  
+/* I/O operation functions  *****************************************************/
+/** @addtogroup HAL_SDMMC_LL_Group2
+  * @{
+  */
+/* Blocking mode: Polling */
+uint32_t          SDMMC_ReadFIFO(SDMMC_TypeDef *SDMMCx);
+HAL_StatusTypeDef SDMMC_WriteFIFO(SDMMC_TypeDef *SDMMCx, uint32_t *pWriteData);
+/**
+  * @}
+  */
+  
+/* Peripheral Control functions  ************************************************/
+/** @addtogroup HAL_SDMMC_LL_Group3
+  * @{
+  */
+HAL_StatusTypeDef SDMMC_PowerState_ON(SDMMC_TypeDef *SDMMCx);
+HAL_StatusTypeDef SDMMC_PowerState_OFF(SDMMC_TypeDef *SDMMCx);
+uint32_t          SDMMC_GetPowerState(SDMMC_TypeDef *SDMMCx);
+
+/* Command path state machine (CPSM) management functions */
+HAL_StatusTypeDef SDMMC_SendCommand(SDMMC_TypeDef *SDMMCx, SDMMC_CmdInitTypeDef *Command);
+uint8_t           SDMMC_GetCommandResponse(SDMMC_TypeDef *SDMMCx);
+uint32_t          SDMMC_GetResponse(SDMMC_TypeDef *SDMMCx, uint32_t Response);
+
+/* Data path state machine (DPSM) management functions */
+HAL_StatusTypeDef SDMMC_DataConfig(SDMMC_TypeDef *SDMMCx, SDMMC_DataInitTypeDef* Data);
+uint32_t          SDMMC_GetDataCounter(SDMMC_TypeDef *SDMMCx);
+uint32_t          SDMMC_GetFIFOCount(SDMMC_TypeDef *SDMMCx);
+
+/* SDMMC Cards mode management functions */
+HAL_StatusTypeDef SDMMC_SetSDMMCReadWaitMode(SDMMC_TypeDef *SDMMCx, uint32_t SDMMC_ReadWaitMode);
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_LL_SDMMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_ll_usb.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1691 @@
+// Fixed version not to produce warning message by MIkami,Naoki
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_ll_usb.c
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   USB Low Layer HAL module driver.
+  *    
+  *          This file provides firmware functions to manage the following 
+  *          functionalities of the USB Peripheral Controller:
+  *           + Initialization/de-initialization functions
+  *           + I/O operation functions
+  *           + Peripheral Control functions 
+  *           + Peripheral State functions
+  *         
+  @verbatim
+  ==============================================================================
+                    ##### How to use this driver #####
+  ==============================================================================
+    [..]
+      (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure.
+  
+      (#) Call USB_CoreInit() API to initialize the USB Core peripheral.
+
+      (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes.
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal.h"
+
+/** @addtogroup STM32F7xx_LL_USB_DRIVER
+  * @{
+  */
+
+#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED)
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx);
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup LL_USB_Exported_Functions USB Low Layer Exported Functions
+  * @{
+  */
+
+/** @defgroup LL_USB_Group1 Initialization/de-initialization functions 
+ *  @brief    Initialization and Configuration functions 
+ *
+@verbatim    
+ ===============================================================================
+              ##### Initialization/de-initialization functions #####
+ ===============================================================================
+    [..]  This section provides functions allowing to:
+ 
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Initializes the USB Core
+  * @param  USBx: USB Instance
+  * @param  cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
+  *         the configuration information for the specified USBx peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+  if (cfg.phy_itface == USB_OTG_ULPI_PHY)
+  {
+    
+    USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN);
+
+    /* Init The ULPI Interface */
+    USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL);
+   
+    /* Select vbus source */
+    USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI);
+    if(cfg.use_external_vbus == 1)
+    {
+      USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD;
+    }
+    /* Reset after a PHY select  */
+    USB_CoreReset(USBx); 
+  }
+  else /* FS interface (embedded Phy) */
+  {
+    /* Select FS Embedded PHY */
+    USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
+    
+    /* Reset after a PHY select and set Host mode */
+    USB_CoreReset(USBx);
+    
+    /* Deactivate the power down*/
+    USBx->GCCFG = USB_OTG_GCCFG_PWRDWN;
+  }
+ 
+  if(cfg.dma_enable == ENABLE)
+  {
+    USBx->GAHBCFG |= (USB_OTG_GAHBCFG_HBSTLEN_1 | USB_OTG_GAHBCFG_HBSTLEN_2);
+    USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN;
+  }  
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_EnableGlobalInt
+  *         Enables the controller's Global Int in the AHB Config reg
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
+{
+  USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT;
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  USB_DisableGlobalInt
+  *         Disable the controller's Global Int in the AHB Config reg
+  * @param  USBx : Selected device
+  * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
+{
+  USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT;
+  return HAL_OK;
+}
+   
+/**
+  * @brief  USB_SetCurrentMode : Set functional mode
+  * @param  USBx : Selected device
+  * @param  mode :  current core mode
+  *          This parameter can be one of these values:
+  *            @arg USB_OTG_DEVICE_MODE: Peripheral mode
+  *            @arg USB_OTG_HOST_MODE: Host mode
+  *            @arg USB_OTG_DRD_MODE: Dual Role Device mode  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode)
+{
+  USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD); 
+  
+  if ( mode == USB_OTG_HOST_MODE)
+  {
+    USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD; 
+  }
+  else if ( mode == USB_OTG_DEVICE_MODE)
+  {
+    USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; 
+  }
+  HAL_Delay(50);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_DevInit : Initializes the USB_OTG controller registers 
+  *         for device mode
+  * @param  USBx : Selected device
+  * @param  cfg  : pointer to a USB_OTG_CfgTypeDef structure that contains
+  *         the configuration information for the specified USBx peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_DevInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+  uint32_t i = 0;
+
+  /*Activate VBUS Sensing B */
+  USBx->GCCFG |= USB_OTG_GCCFG_VBDEN;
+  
+  if (cfg.vbus_sensing_enable == 0)
+  {
+    /* Deactivate VBUS Sensing B */
+    USBx->GCCFG &= ~ USB_OTG_GCCFG_VBDEN;
+    
+    /* B-peripheral session valid override enable*/ 
+    USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
+    USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
+  }
+   
+  /* Restart the Phy Clock */
+  USBx_PCGCCTL = 0;
+
+  /* Device mode configuration */
+  USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80;
+  
+  if(cfg.phy_itface  == USB_OTG_ULPI_PHY)
+  {
+    if(cfg.speed == USB_OTG_SPEED_HIGH)
+    {      
+      /* Set High speed phy */
+      USB_SetDevSpeed (USBx , USB_OTG_SPEED_HIGH);
+    }
+    else 
+    {
+      /* set High speed phy in Full speed mode */
+      USB_SetDevSpeed (USBx , USB_OTG_SPEED_HIGH_IN_FULL);
+    }
+  }
+  else
+  {
+    /* Set Full speed phy */
+    USB_SetDevSpeed (USBx , USB_OTG_SPEED_FULL);
+  }
+
+  /* Flush the FIFOs */
+  USB_FlushTxFifo(USBx , 0x10); /* all Tx FIFOs */
+  USB_FlushRxFifo(USBx);
+  
+  /* Clear all pending Device Interrupts */
+  USBx_DEVICE->DIEPMSK = 0;
+  USBx_DEVICE->DOEPMSK = 0;
+  USBx_DEVICE->DAINT = 0xFFFFFFFF;
+  USBx_DEVICE->DAINTMSK = 0;
+  
+  for (i = 0; i < cfg.dev_endpoints; i++)
+  {
+    if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)
+    {
+      USBx_INEP(i)->DIEPCTL = (USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK);
+    }
+    else
+    {
+      USBx_INEP(i)->DIEPCTL = 0;
+    }
+    
+    USBx_INEP(i)->DIEPTSIZ = 0;
+    USBx_INEP(i)->DIEPINT  = 0xFF;
+  }
+  
+  for (i = 0; i < cfg.dev_endpoints; i++)
+  {
+    if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA)
+    {
+      USBx_OUTEP(i)->DOEPCTL = (USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK);
+    }
+    else
+    {
+      USBx_OUTEP(i)->DOEPCTL = 0;
+    }
+    
+    USBx_OUTEP(i)->DOEPTSIZ = 0;
+    USBx_OUTEP(i)->DOEPINT  = 0xFF;
+  }
+  
+  USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM);
+  
+  if (cfg.dma_enable == 1)
+  {
+    /*Set threshold parameters */
+    USBx_DEVICE->DTHRCTL = (USB_OTG_DTHRCTL_TXTHRLEN_6 | USB_OTG_DTHRCTL_RXTHRLEN_6);
+    USBx_DEVICE->DTHRCTL |= (USB_OTG_DTHRCTL_RXTHREN | USB_OTG_DTHRCTL_ISOTHREN | USB_OTG_DTHRCTL_NONISOTHREN);
+    
+    i= USBx_DEVICE->DTHRCTL;
+  }
+  
+  /* Disable all interrupts. */
+  USBx->GINTMSK = 0;
+  
+  /* Clear any pending interrupts */
+  USBx->GINTSTS = 0xBFFFFFFF;
+
+  /* Enable the common interrupts */
+  if (cfg.dma_enable == DISABLE)
+  {
+    USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; 
+  }
+  
+  /* Enable interrupts matching to the Device mode ONLY */
+  USBx->GINTMSK |= (USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST |\
+                    USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT |\
+                    USB_OTG_GINTMSK_OEPINT   | USB_OTG_GINTMSK_IISOIXFRM|\
+                    USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
+  
+  if(cfg.Sof_enable)
+  {
+    USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM;
+  }
+
+  if (cfg.vbus_sensing_enable == ENABLE)
+  {
+    USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT); 
+  }
+  
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  USB_OTG_FlushTxFifo : Flush a Tx FIFO
+  * @param  USBx : Selected device
+  * @param  num : FIFO number
+  *         This parameter can be a value from 1 to 15
+            15 means Flush all Tx FIFOs
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num )
+{
+  uint32_t count = 0;
+ 
+  USBx->GRSTCTL = ( USB_OTG_GRSTCTL_TXFFLSH |(uint32_t)( num << 6)); 
+ 
+  do
+  {
+    if (++count > 200000)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH);
+  
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  USB_FlushRxFifo : Flush Rx FIFO
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx)
+{
+  uint32_t count = 0;
+  
+  USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH;
+  
+  do
+  {
+    if (++count > 200000)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH);
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_SetDevSpeed :Initializes the DevSpd field of DCFG register 
+  *         depending the PHY type and the enumeration speed of the device.
+  * @param  USBx : Selected device
+  * @param  speed : device speed
+  *          This parameter can be one of these values:
+  *            @arg USB_OTG_SPEED_HIGH: High speed mode
+  *            @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode
+  *            @arg USB_OTG_SPEED_FULL: Full speed mode
+  *            @arg USB_OTG_SPEED_LOW: Low speed mode
+  * @retval  Hal status
+  */
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed)
+{
+  USBx_DEVICE->DCFG |= speed;
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_GetDevSpeed :Return the  Dev Speed 
+  * @param  USBx : Selected device
+  * @retval speed : device speed
+  *          This parameter can be one of these values:
+  *            @arg USB_OTG_SPEED_HIGH: High speed mode
+  *            @arg USB_OTG_SPEED_FULL: Full speed mode
+  *            @arg USB_OTG_SPEED_LOW: Low speed mode
+  */
+uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx)
+{
+  uint8_t speed = 0;
+  
+  if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ)
+  {
+    speed = USB_OTG_SPEED_HIGH;
+  }
+  else if (((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ)||
+           ((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_48MHZ))
+  {
+    speed = USB_OTG_SPEED_FULL;
+  }
+  else if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
+  {
+    speed = USB_OTG_SPEED_LOW;
+  }
+  
+  return speed;
+}
+
+/**
+  * @brief  Activate and configure an endpoint
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+  if (ep->is_in == 1)
+  {
+   USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)));
+   
+    if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0)
+    {
+      USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+        ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP)); 
+    } 
+
+  }
+  else
+  {
+     USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16);
+     
+    if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0)
+    {
+      USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+       (USB_OTG_DIEPCTL_SD0PID_SEVNFRM)| (USB_OTG_DOEPCTL_USBAEP));
+    } 
+  }
+  return HAL_OK;
+}
+/**
+  * @brief  Activate and configure a dedicated endpoint
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+  static __IO uint32_t debug = 0;
+  
+  /* Read DEPCTLn register */
+  if (ep->is_in == 1)
+  {
+    if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0)
+    {
+      USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+        ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP)); 
+    } 
+    
+    
+    debug  |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+        ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP)); 
+    
+   USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)));
+  }
+  else
+  {
+    if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0)
+    {
+      USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+        ((ep->num) << 22 ) | (USB_OTG_DOEPCTL_USBAEP));
+      
+      debug = (uint32_t)(((uint32_t )USBx) + USB_OTG_OUT_ENDPOINT_BASE + (0)*USB_OTG_EP_REG_SIZE);
+      debug = (uint32_t )&USBx_OUTEP(ep->num)->DOEPCTL;
+      debug |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\
+        ((ep->num) << 22 ) | (USB_OTG_DOEPCTL_USBAEP)); 
+    } 
+    
+     USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16);
+  }
+
+  return HAL_OK;
+}
+/**
+  * @brief  De-activate and de-initialize an endpoint
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+  /* Read DEPCTLn register */
+  if (ep->is_in == 1)
+  {
+   USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
+   USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));   
+   USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;   
+  }
+  else
+  {
+     USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
+     USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));     
+     USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;      
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  De-activate and de-initialize a dedicated endpoint
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+  /* Read DEPCTLn register */
+  if (ep->is_in == 1)
+  {
+   USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
+   USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
+  }
+  else
+  {
+     USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP; 
+     USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_EPStartXfer : setup and starts a transfer over an EP
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @param  dma: USB dma enabled or disabled 
+  *          This parameter can be one of these values:
+  *           0 : DMA feature not used 
+  *           1 : DMA feature used  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma)
+{
+  uint16_t pktcnt = 0;
+  
+  /* IN endpoint */
+  if (ep->is_in == 1)
+  {
+    /* Zero Length Packet? */
+    if (ep->xfer_len == 0)
+    {
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); 
+      USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ;
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); 
+    }
+    else
+    {
+      /* Program the transfer size and packet count
+      * as follows: xfersize = N * maxpacket +
+      * short_packet pktcnt = N + (short_packet
+      * exist ? 1 : 0)
+      */
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); 
+      USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket) << 19)) ;
+      USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); 
+      
+      if (ep->type == EP_TYPE_ISOC)
+      {
+        USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT); 
+        USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1 << 29)); 
+      }       
+    }
+
+    if (dma == 1)
+    {
+      USBx_INEP(ep->num)->DIEPDMA = (uint32_t)(ep->dma_addr);
+    }
+    else
+    {
+      if (ep->type != EP_TYPE_ISOC)
+      {
+        /* Enable the Tx FIFO Empty Interrupt for this EP */
+        if (ep->xfer_len > 0)
+        {
+          USBx_DEVICE->DIEPEMPMSK |= 1 << ep->num;
+        }
+      }
+    }
+
+    if (ep->type == EP_TYPE_ISOC)
+    {
+      if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0)
+      {
+        USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM;
+      }
+      else
+      {
+        USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM;
+      }
+    } 
+    
+    /* EP enable, IN data in FIFO */
+    USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
+    
+    if (ep->type == EP_TYPE_ISOC)
+    {
+      USB_WritePacket(USBx, ep->xfer_buff, ep->num, ep->xfer_len, dma);   
+    }    
+  }
+  else /* OUT endpoint */
+  {
+    /* Program the transfer size and packet count as follows:
+    * pktcnt = N
+    * xfersize = N * maxpacket
+    */  
+    USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); 
+    USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); 
+      
+    if (ep->xfer_len == 0)
+    {
+      USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket);
+      USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)) ;      
+    }
+    else
+    {
+      pktcnt = (ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket; 
+      USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (pktcnt << 19));
+      USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt)); 
+    }
+
+    if (dma == 1)
+    {
+      USBx_OUTEP(ep->num)->DOEPDMA = (uint32_t)ep->xfer_buff;
+    }
+    
+    if (ep->type == EP_TYPE_ISOC)
+    {
+      if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0)
+      {
+        USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM;
+      }
+      else
+      {
+        USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM;
+      }
+    }
+    /* EP enable */
+    USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_EP0StartXfer : setup and starts a transfer over the EP  0
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure
+  * @param  dma: USB dma enabled or disabled 
+  *          This parameter can be one of these values:
+  *           0 : DMA feature not used 
+  *           1 : DMA feature used  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma)
+{
+  /* IN endpoint */
+  if (ep->is_in == 1)
+  {
+    /* Zero Length Packet? */
+    if (ep->xfer_len == 0)
+    {
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); 
+      USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ;
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); 
+    }
+    else
+    {
+      /* Program the transfer size and packet count
+      * as follows: xfersize = N * maxpacket +
+      * short_packet pktcnt = N + (short_packet
+      * exist ? 1 : 0)
+      */
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
+      USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); 
+      
+      if(ep->xfer_len > ep->maxpacket)
+      {
+        ep->xfer_len = ep->maxpacket;
+      }
+      USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ;
+      USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); 
+    
+    }
+    
+    if (dma == 1)
+    {
+      USBx_INEP(ep->num)->DIEPDMA = (uint32_t)(ep->dma_addr);
+    }
+    else
+    {
+      /* Enable the Tx FIFO Empty Interrupt for this EP */
+      if (ep->xfer_len > 0)
+      {
+        USBx_DEVICE->DIEPEMPMSK |= 1 << (ep->num);
+      }
+    }
+    
+    /* EP enable, IN data in FIFO */
+    USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);   
+  }
+  else /* OUT endpoint */
+  {
+    /* Program the transfer size and packet count as follows:
+    * pktcnt = N
+    * xfersize = N * maxpacket
+    */
+    USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); 
+    USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); 
+      
+    if (ep->xfer_len > 0)
+    {
+      ep->xfer_len = ep->maxpacket;
+    }
+    
+    USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19));
+    USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket)); 
+    
+
+    if (dma == 1)
+    {
+      USBx_OUTEP(ep->num)->DOEPDMA = (uint32_t)(ep->xfer_buff);
+    }
+    
+    /* EP enable */
+    USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);    
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_WritePacket : Writes a packet into the Tx FIFO associated 
+  *         with the EP/channel
+  * @param  USBx : Selected device           
+  * @param  src :  pointer to source buffer
+  * @param  ch_ep_num : endpoint or host channel number
+  * @param  len : Number of bytes to write
+  * @param  dma: USB dma enabled or disabled 
+  *          This parameter can be one of these values:
+  *           0 : DMA feature not used 
+  *           1 : DMA feature used  
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma)
+{
+  uint32_t count32b= 0 , i= 0;
+  
+  if (dma == 0)
+  {
+    count32b =  (len + 3) / 4;
+    for (i = 0; i < count32b; i++, src += 4)
+    {
+////      USBx_DFIFO(ch_ep_num) = *((__packed uint32_t *)src);
+      USBx_DFIFO(ch_ep_num) = *((uint32_t *)src);   // by MIKAMI
+    }
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_ReadPacket : read a packet from the Tx FIFO associated 
+  *         with the EP/channel
+  * @param  USBx : Selected device  
+  * @param  src : source pointer
+  * @param  ch_ep_num : endpoint or host channel number
+  * @param  len : Number of bytes to read
+  * @param  dma: USB dma enabled or disabled 
+  *          This parameter can be one of these values:
+  *           0 : DMA feature not used 
+  *           1 : DMA feature used  
+  * @retval pointer to destination buffer
+  */
+void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len)
+{
+  uint32_t i=0;
+  uint32_t count32b = (len + 3) / 4;
+  
+  for ( i = 0; i < count32b; i++, dest += 4 )
+  {
+////    *(__packed uint32_t *)dest = USBx_DFIFO(0);
+    *(uint32_t *)dest = USBx_DFIFO(0);  // by MIKAMI
+  }
+  return ((void *)dest);
+}
+
+/**
+  * @brief  USB_EPSetStall : set a stall condition over an EP
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep)
+{
+  if (ep->is_in == 1)
+  {
+    if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == 0)
+    {
+      USBx_INEP(ep->num)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS); 
+    } 
+    USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_STALL;
+  }
+  else
+  {
+    if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == 0)
+    {
+      USBx_OUTEP(ep->num)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS); 
+    } 
+    USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_STALL;
+  }
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  USB_EPClearStall : Clear a stall condition over an EP
+  * @param  USBx : Selected device
+  * @param  ep: pointer to endpoint structure   
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
+{
+  if (ep->is_in == 1)
+  {
+    USBx_INEP(ep->num)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL;
+    if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
+    {
+       USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */
+    }    
+  }
+  else
+  {
+    USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL;
+    if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
+    {
+      USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */
+    }    
+  }
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_StopDevice : Stop the usb device mode
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx)
+{
+  uint32_t i;
+  
+  /* Clear Pending interrupt */
+  for (i = 0; i < 15 ; i++)
+  {
+    USBx_INEP(i)->DIEPINT  = 0xFF;
+    USBx_OUTEP(i)->DOEPINT  = 0xFF;
+  }
+  USBx_DEVICE->DAINT = 0xFFFFFFFF;
+  
+  /* Clear interrupt masks */
+  USBx_DEVICE->DIEPMSK  = 0;
+  USBx_DEVICE->DOEPMSK  = 0;
+  USBx_DEVICE->DAINTMSK = 0;
+  
+  /* Flush the FIFO */
+  USB_FlushRxFifo(USBx);
+  USB_FlushTxFifo(USBx ,  0x10 );  
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_SetDevAddress : Stop the usb device mode
+  * @param  USBx : Selected device
+  * @param  address : new device address to be assigned
+  *          This parameter can be a value from 0 to 255
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address)
+{
+  USBx_DEVICE->DCFG &= ~ (USB_OTG_DCFG_DAD);
+  USBx_DEVICE->DCFG |= (address << 4) & USB_OTG_DCFG_DAD ;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  USB_DevConnect (USB_OTG_GlobalTypeDef *USBx)
+{
+  USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS ;
+  HAL_Delay(3);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx)
+{
+  USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS ;
+  HAL_Delay(3);
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  USB_ReadInterrupts: return the global USB interrupt status
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+uint32_t  USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx)
+{
+  uint32_t v = 0;
+  
+  v = USBx->GINTSTS;
+  v &= USBx->GINTMSK;
+  return v;  
+}
+
+/**
+  * @brief  USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+  uint32_t v;
+  v  = USBx_DEVICE->DAINT;
+  v &= USBx_DEVICE->DAINTMSK;
+  return ((v & 0xffff0000) >> 16);
+}
+
+/**
+  * @brief  USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+  uint32_t v;
+  v  = USBx_DEVICE->DAINT;
+  v &= USBx_DEVICE->DAINTMSK;
+  return ((v & 0xFFFF));
+}
+
+/**
+  * @brief  Returns Device OUT EP Interrupt register
+  * @param  USBx : Selected device
+  * @param  epnum : endpoint number
+  *          This parameter can be a value from 0 to 15
+  * @retval Device OUT EP Interrupt register
+  */
+uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
+{
+  uint32_t v;
+  v  = USBx_OUTEP(epnum)->DOEPINT;
+  v &= USBx_DEVICE->DOEPMSK;
+  return v;
+}
+
+/**
+  * @brief  Returns Device IN EP Interrupt register
+  * @param  USBx : Selected device
+  * @param  epnum : endpoint number
+  *          This parameter can be a value from 0 to 15
+  * @retval Device IN EP Interrupt register
+  */
+uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
+{
+  uint32_t v, msk, emp;
+  
+  msk = USBx_DEVICE->DIEPMSK;
+  emp = USBx_DEVICE->DIEPEMPMSK;
+  msk |= ((emp >> epnum) & 0x1) << 7;
+  v = USBx_INEP(epnum)->DIEPINT & msk;
+  return v;
+}
+
+/**
+  * @brief  USB_ClearInterrupts: clear a USB interrupt
+  * @param  USBx : Selected device
+  * @param  interrupt : interrupt flag
+  * @retval None
+  */
+void  USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt)
+{
+  USBx->GINTSTS |= interrupt; 
+}
+
+/**
+  * @brief  Returns USB core mode
+  * @param  USBx : Selected device
+  * @retval return core mode : Host or Device
+  *          This parameter can be one of these values:
+  *           0 : Host 
+  *           1 : Device
+  */
+uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx)
+{
+  return ((USBx->GINTSTS ) & 0x1);
+}
+
+
+/**
+  * @brief  Activate EP0 for Setup transactions
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+HAL_StatusTypeDef  USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx)
+{
+  /* Set the MPS of the IN EP based on the enumeration speed */
+  USBx_INEP(0)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ;
+  
+  if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
+  {
+    USBx_INEP(0)->DIEPCTL |= 3;
+  }
+  USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK;
+
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  Prepare the EP0 to start the first control setup
+  * @param  USBx : Selected device
+  * @param  dma: USB dma enabled or disabled 
+  *          This parameter can be one of these values:
+  *           0 : DMA feature not used 
+  *           1 : DMA feature used  
+  * @param  psetup : pointer to setup packet
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup)
+{
+  USBx_OUTEP(0)->DOEPTSIZ = 0;
+  USBx_OUTEP(0)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)) ;
+  USBx_OUTEP(0)->DOEPTSIZ |= (3 * 8);
+  USBx_OUTEP(0)->DOEPTSIZ |=  USB_OTG_DOEPTSIZ_STUPCNT;  
+  
+  if (dma == 1)
+  {
+    USBx_OUTEP(0)->DOEPDMA = (uint32_t)psetup;
+    /* EP enable */
+    USBx_OUTEP(0)->DOEPCTL = 0x80008000;
+  }
+  
+  return HAL_OK;  
+}
+
+
+/**
+  * @brief  Reset the USB Core (needed after USB clock settings change)
+  * @param  USBx : Selected device
+  * @retval HAL status
+  */
+static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx)
+{
+  uint32_t count = 0;
+
+  /* Wait for AHB master IDLE state. */
+  do
+  {
+    if (++count > 200000)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0);
+  
+  /* Core Soft Reset */
+  count = 0;
+  USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST;
+
+  do
+  {
+    if (++count > 200000)
+    {
+      return HAL_TIMEOUT;
+    }
+  }
+  while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST);
+  
+  return HAL_OK;
+}
+
+
+/**
+  * @brief  USB_HostInit : Initializes the USB OTG controller registers 
+  *         for Host mode 
+  * @param  USBx : Selected device
+  * @param  cfg  : pointer to a USB_OTG_CfgTypeDef structure that contains
+  *         the configuration information for the specified USBx peripheral.
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
+{
+  uint32_t i;
+  
+  /* Restart the Phy Clock */
+  USBx_PCGCCTL = 0;
+  
+  /*Activate VBUS Sensing B */
+  USBx->GCCFG |= USB_OTG_GCCFG_VBDEN;
+  
+  /* Disable the FS/LS support mode only */
+  if((cfg.speed == USB_OTG_SPEED_FULL)&&
+     (USBx != USB_OTG_FS))
+  {
+    USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS; 
+  }
+  else
+  {
+    USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS);  
+  }
+
+  /* Make sure the FIFOs are flushed. */
+  USB_FlushTxFifo(USBx, 0x10 ); /* all Tx FIFOs */
+  USB_FlushRxFifo(USBx);
+
+  /* Clear all pending HC Interrupts */
+  for (i = 0; i < cfg.Host_channels; i++)
+  {
+    USBx_HC(i)->HCINT = 0xFFFFFFFF;
+    USBx_HC(i)->HCINTMSK = 0;
+  }
+  
+  /* Enable VBUS driving */
+  USB_DriveVbus(USBx, 1);
+  
+  HAL_Delay(200);
+  
+  /* Disable all interrupts. */
+  USBx->GINTMSK = 0;
+  
+  /* Clear any pending interrupts */
+  USBx->GINTSTS = 0xFFFFFFFF;
+  
+  if(USBx == USB_OTG_FS)
+  {
+    /* set Rx FIFO size */
+    USBx->GRXFSIZ  = (uint32_t )0x80; 
+    USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x60 << 16)& USB_OTG_NPTXFD) | 0x80);
+    USBx->HPTXFSIZ = (uint32_t )(((0x40 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0);
+  }
+  else
+  {
+    /* set Rx FIFO size */
+    USBx->GRXFSIZ  = (uint32_t )0x200; 
+    USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x100 << 16)& USB_OTG_NPTXFD) | 0x200);
+    USBx->HPTXFSIZ = (uint32_t )(((0xE0 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0x300);
+  }
+  
+  /* Enable the common interrupts */
+  if (cfg.dma_enable == DISABLE)
+  {
+    USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; 
+  }
+  
+  /* Enable interrupts matching to the Host mode ONLY */
+  USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM            | USB_OTG_GINTMSK_HCIM |\
+                    USB_OTG_GINTMSK_SOFM             |USB_OTG_GINTSTS_DISCINT|\
+                    USB_OTG_GINTMSK_PXFRM_IISOOXFRM  | USB_OTG_GINTMSK_WUIM);
+
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the 
+  *         HCFG register on the PHY type and set the right frame interval
+  * @param  USBx : Selected device
+  * @param  freq : clock frequency
+  *          This parameter can be one of these values:
+  *           HCFG_48_MHZ : Full Speed 48 MHz Clock 
+  *           HCFG_6_MHZ : Low Speed 6 MHz Clock 
+  * @retval HAL status
+  */
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq)
+{
+  USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS);
+  USBx_HOST->HCFG |= (freq & USB_OTG_HCFG_FSLSPCS);
+  
+  if (freq ==  HCFG_48_MHZ)
+  {
+    USBx_HOST->HFIR = (uint32_t)48000;
+  }
+  else if (freq ==  HCFG_6_MHZ)
+  {
+    USBx_HOST->HFIR = (uint32_t)6000;
+  } 
+  return HAL_OK;  
+}
+
+/**
+* @brief  USB_OTG_ResetPort : Reset Host Port
+  * @param  USBx : Selected device
+  * @retval HAL status
+  * @note : (1)The application must wait at least 10 ms
+  *   before clearing the reset bit.
+  */
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx)
+{
+  __IO uint32_t hprt0;
+  
+  hprt0 = USBx_HPRT0;
+  
+  hprt0 &= ~(USB_OTG_HPRT_PENA    | USB_OTG_HPRT_PCDET |\
+    USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+  
+  USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0);  
+  HAL_Delay (10);                                /* See Note #1 */
+  USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0); 
+  return HAL_OK;
+}
+
+/**
+  * @brief  USB_DriveVbus : activate or de-activate vbus
+  * @param  state : VBUS state
+  *          This parameter can be one of these values:
+  *           0 : VBUS Active 
+  *           1 : VBUS Inactive
+  * @retval HAL status
+*/
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state)
+{
+  __IO uint32_t hprt0;
+
+  hprt0 = USBx_HPRT0;
+  hprt0 &= ~(USB_OTG_HPRT_PENA    | USB_OTG_HPRT_PCDET |\
+                         USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+  
+  if (((hprt0 & USB_OTG_HPRT_PPWR) == 0 ) && (state == 1 ))
+  {
+    USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0); 
+  }
+  if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0 ))
+  {
+    USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0); 
+  }
+  return HAL_OK; 
+}
+
+/**
+  * @brief  Return Host Core speed
+  * @param  USBx : Selected device
+  * @retval speed : Host speed
+  *          This parameter can be one of these values:
+  *            @arg USB_OTG_SPEED_HIGH: High speed mode
+  *            @arg USB_OTG_SPEED_FULL: Full speed mode
+  *            @arg USB_OTG_SPEED_LOW: Low speed mode
+  */
+uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx)
+{
+  __IO uint32_t hprt0;
+  
+  hprt0 = USBx_HPRT0;
+  return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17);
+}
+
+/**
+  * @brief  Return Host Current Frame number
+  * @param  USBx : Selected device
+  * @retval current frame number
+*/
+uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx)
+{
+  return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM);
+}
+
+/**
+  * @brief  Initialize a host channel
+  * @param  USBx : Selected device
+  * @param  ch_num : Channel number
+  *         This parameter can be a value from 1 to 15
+  * @param  epnum : Endpoint number
+  *          This parameter can be a value from 1 to 15
+  * @param  dev_address : Current device address
+  *          This parameter can be a value from 0 to 255
+  * @param  speed : Current device speed
+  *          This parameter can be one of these values:
+  *            @arg USB_OTG_SPEED_HIGH: High speed mode
+  *            @arg USB_OTG_SPEED_FULL: Full speed mode
+  *            @arg USB_OTG_SPEED_LOW: Low speed mode
+  * @param  ep_type : Endpoint Type
+  *          This parameter can be one of these values:
+  *            @arg EP_TYPE_CTRL: Control type
+  *            @arg EP_TYPE_ISOC: Isochronous type
+  *            @arg EP_TYPE_BULK: Bulk type
+  *            @arg EP_TYPE_INTR: Interrupt type
+  * @param  mps : Max Packet Size
+  *          This parameter can be a value from 0 to32K
+  * @retval HAL state
+  */
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,  
+                              uint8_t ch_num,
+                              uint8_t epnum,
+                              uint8_t dev_address,
+                              uint8_t speed,
+                              uint8_t ep_type,
+                              uint16_t mps)
+{
+    
+  /* Clear old interrupt conditions for this host channel. */
+  USBx_HC(ch_num)->HCINT = 0xFFFFFFFF;
+  
+  /* Enable channel interrupts required for this transfer. */
+  switch (ep_type) 
+  {
+  case EP_TYPE_CTRL:
+  case EP_TYPE_BULK:
+    
+    USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM  |\
+                                USB_OTG_HCINTMSK_STALLM |\
+                                USB_OTG_HCINTMSK_TXERRM |\
+                                USB_OTG_HCINTMSK_DTERRM |\
+                                USB_OTG_HCINTMSK_AHBERR |\
+                                USB_OTG_HCINTMSK_NAKM ;
+ 
+    if (epnum & 0x80) 
+    {
+      USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
+    } 
+    else 
+    {
+      if(USBx != USB_OTG_FS)
+      {
+        USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
+      }
+    }
+    break;
+    
+  case EP_TYPE_INTR:
+    
+    USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM  |\
+                                USB_OTG_HCINTMSK_STALLM |\
+                                USB_OTG_HCINTMSK_TXERRM |\
+                                USB_OTG_HCINTMSK_DTERRM |\
+                                USB_OTG_HCINTMSK_NAKM   |\
+                                USB_OTG_HCINTMSK_AHBERR |\
+                                USB_OTG_HCINTMSK_FRMORM ;    
+    
+    if (epnum & 0x80) 
+    {
+      USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
+    }
+    
+    break;
+  case EP_TYPE_ISOC:
+    
+    USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM  |\
+                                USB_OTG_HCINTMSK_ACKM   |\
+                                USB_OTG_HCINTMSK_AHBERR |\
+                                USB_OTG_HCINTMSK_FRMORM ;   
+    
+    if (epnum & 0x80) 
+    {
+      USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM);      
+    }
+    break;
+  }
+  
+  /* Enable the top level host channel interrupt. */
+  USBx_HOST->HAINTMSK |= (1 << ch_num);
+  
+  /* Make sure host channel interrupts are enabled. */
+  USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM;
+  
+  /* Program the HCCHAR register */
+  USBx_HC(ch_num)->HCCHAR = (((dev_address << 22) & USB_OTG_HCCHAR_DAD)  |\
+                             (((epnum & 0x7F)<< 11) & USB_OTG_HCCHAR_EPNUM)|\
+                             ((((epnum & 0x80) == 0x80)<< 15) & USB_OTG_HCCHAR_EPDIR)|\
+                             (((speed == HPRT0_PRTSPD_LOW_SPEED)<< 17) & USB_OTG_HCCHAR_LSDEV)|\
+                             ((ep_type << 18) & USB_OTG_HCCHAR_EPTYP)|\
+                             (mps & USB_OTG_HCCHAR_MPSIZ));
+    
+  if (ep_type == EP_TYPE_INTR)
+  {
+    USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ;
+  }
+
+  return HAL_OK; 
+}
+
+/**
+  * @brief  Start a transfer over a host channel
+  * @param  USBx : Selected device
+  * @param  hc : pointer to host channel structure
+  * @param  dma: USB dma enabled or disabled 
+  *          This parameter can be one of these values:
+  *           0 : DMA feature not used 
+  *           1 : DMA feature used  
+  * @retval HAL state
+  */
+#if defined   (__CC_ARM) /*!< ARM Compiler */
+#pragma O0
+#elif defined (__GNUC__) /*!< GNU Compiler */
+#pragma GCC optimize ("O0")
+#endif /* __CC_ARM */
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma)
+{
+  uint8_t  is_oddframe = 0; 
+  uint16_t len_words = 0;   
+  uint16_t num_packets = 0;
+  uint16_t max_hc_pkt_count = 256;
+  uint32_t tmpreg = 0;
+    
+  if((USBx != USB_OTG_FS) && (hc->speed == USB_OTG_SPEED_HIGH))
+  {
+    if((dma == 0) && (hc->do_ping == 1))
+    {
+      USB_DoPing(USBx, hc->ch_num);
+      return HAL_OK;
+    }
+    else if(dma == 1)
+    {
+      USBx_HC(hc->ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
+      hc->do_ping = 0;
+    }
+  }
+  
+  /* Compute the expected number of packets associated to the transfer */
+  if (hc->xfer_len > 0)
+  {
+    num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
+    
+    if (num_packets > max_hc_pkt_count)
+    {
+      num_packets = max_hc_pkt_count;
+      hc->xfer_len = num_packets * hc->max_packet;
+    }
+  }
+  else
+  {
+    num_packets = 1;
+  }
+  if (hc->ep_is_in)
+  {
+    hc->xfer_len = num_packets * hc->max_packet;
+  }
+  
+  /* Initialize the HCTSIZn register */
+  USBx_HC(hc->ch_num)->HCTSIZ = (((hc->xfer_len) & USB_OTG_HCTSIZ_XFRSIZ)) |\
+    ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\
+      (((hc->data_pid) << 29) & USB_OTG_HCTSIZ_DPID);
+  
+  if (dma)
+  {
+    /* xfer_buff MUST be 32-bits aligned */
+    USBx_HC(hc->ch_num)->HCDMA = (uint32_t)hc->xfer_buff;
+  }
+  
+  is_oddframe = (USBx_HOST->HFNUM & 0x01) ? 0 : 1;
+  USBx_HC(hc->ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM;
+  USBx_HC(hc->ch_num)->HCCHAR |= (is_oddframe << 29);
+  
+  /* Set host channel enable */
+  tmpreg = USBx_HC(hc->ch_num)->HCCHAR;
+  tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+  tmpreg |= USB_OTG_HCCHAR_CHENA;
+  USBx_HC(hc->ch_num)->HCCHAR = tmpreg;
+  
+  if (dma == 0) /* Slave mode */
+  {  
+    if((hc->ep_is_in == 0) && (hc->xfer_len > 0))
+    {
+      switch(hc->ep_type) 
+      {
+        /* Non periodic transfer */
+      case EP_TYPE_CTRL:
+      case EP_TYPE_BULK:
+        
+        len_words = (hc->xfer_len + 3) / 4;
+        
+        /* check if there is enough space in FIFO space */
+        if(len_words > (USBx->HNPTXSTS & 0xFFFF))
+        {
+          /* need to process data in nptxfempty interrupt */
+          USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM;
+        }
+        break;
+        /* Periodic transfer */
+      case EP_TYPE_INTR:
+      case EP_TYPE_ISOC:
+        len_words = (hc->xfer_len + 3) / 4;
+        /* check if there is enough space in FIFO space */
+        if(len_words > (USBx_HOST->HPTXSTS & 0xFFFF)) /* split the transfer */
+        {
+          /* need to process data in ptxfempty interrupt */
+          USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM;          
+        }
+        break;
+        
+      default:
+        break;
+      }
+      
+      /* Write packet into the Tx FIFO. */
+      USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, hc->xfer_len, 0);
+    }
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief Read all host channel interrupts status
+  * @param  USBx : Selected device
+  * @retval HAL state
+  */
+uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx)
+{
+  return ((USBx_HOST->HAINT) & 0xFFFF);
+}
+
+/**
+  * @brief  Halt a host channel
+  * @param  USBx : Selected device
+  * @param  hc_num : Host Channel number
+  *         This parameter can be a value from 1 to 15
+  * @retval HAL state
+  */
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num)
+{
+  uint32_t count = 0;
+  
+  /* Check for space in the request queue to issue the halt. */
+  if (((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_CTRL << 18)) || ((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_BULK << 18)))
+  {
+    USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
+    
+    if ((USBx->HNPTXSTS & 0xFFFF) == 0)
+    {
+      USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+      USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;  
+      USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
+      do 
+      {
+        if (++count > 1000) 
+        {
+          break;
+        }
+      } 
+      while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);     
+    }
+    else
+    {
+      USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA; 
+    }
+  }
+  else
+  {
+    USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
+    
+    if ((USBx_HOST->HPTXSTS & 0xFFFF) == 0)
+    {
+      USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+      USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;  
+      USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
+      do 
+      {
+        if (++count > 1000) 
+        {
+          break;
+        }
+      } 
+      while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);     
+    }
+    else
+    {
+       USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA; 
+    }
+  }
+  
+  return HAL_OK;
+}
+
+/**
+  * @brief  Initiate Do Ping protocol
+  * @param  USBx : Selected device
+  * @param  hc_num : Host Channel number
+  *         This parameter can be a value from 1 to 15
+  * @retval HAL state
+  */
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num)
+{
+  uint8_t  num_packets = 1;
+  uint32_t tmpreg = 0;
+
+  USBx_HC(ch_num)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\
+                                USB_OTG_HCTSIZ_DOPING;
+  
+  /* Set host channel enable */
+  tmpreg = USBx_HC(ch_num)->HCCHAR;
+  tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
+  tmpreg |= USB_OTG_HCCHAR_CHENA;
+  USBx_HC(ch_num)->HCCHAR = tmpreg;
+  
+  return HAL_OK;  
+}
+
+/**
+  * @brief  Stop Host Core
+  * @param  USBx : Selected device
+  * @retval HAL state
+  */
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx)
+{
+  uint8_t i;
+  uint32_t count = 0;
+  uint32_t value;
+  
+  USB_DisableGlobalInt(USBx);
+  
+    /* Flush FIFO */
+  USB_FlushTxFifo(USBx, 0x10);
+  USB_FlushRxFifo(USBx);
+  
+  /* Flush out any leftover queued requests. */
+  for (i = 0; i <= 15; i++)
+  {   
+
+    value = USBx_HC(i)->HCCHAR ;
+    value |=  USB_OTG_HCCHAR_CHDIS;
+    value &= ~USB_OTG_HCCHAR_CHENA;  
+    value &= ~USB_OTG_HCCHAR_EPDIR;
+    USBx_HC(i)->HCCHAR = value;
+  }
+  
+  /* Halt all channels to put them into a known state. */  
+  for (i = 0; i <= 15; i++)
+  {
+    value = USBx_HC(i)->HCCHAR ;
+    
+    value |= USB_OTG_HCCHAR_CHDIS;
+    value |= USB_OTG_HCCHAR_CHENA;  
+    value &= ~USB_OTG_HCCHAR_EPDIR;
+    
+    USBx_HC(i)->HCCHAR = value;
+    do 
+    {
+      if (++count > 1000) 
+      {
+        break;
+      }
+    } 
+    while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+  }
+
+  /* Clear any pending Host interrupts */
+  USBx_HOST->HAINT = 0xFFFFFFFF;
+  USBx->GINTSTS = 0xFFFFFFFF;
+  USB_EnableGlobalInt(USBx);
+  return HAL_OK;  
+}
+/**
+  * @}
+  */
+
+#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_ll_usb.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,463 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_ll_usb.h
+  * @author  MCD Application Team
+  * @version V1.0.4
+  * @date    09-December-2015
+  * @brief   Header file of USB Core HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_LL_USB_H
+#define __STM32F7xx_LL_USB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f7xx_hal_def.h"
+
+/** @addtogroup STM32F7xx_HAL
+  * @{
+  */
+
+/** @addtogroup USB_Core
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** 
+  * @brief  USB Mode definition  
+  */  
+typedef enum 
+{
+   USB_OTG_DEVICE_MODE  = 0,
+   USB_OTG_HOST_MODE    = 1,
+   USB_OTG_DRD_MODE     = 2
+   
+}USB_OTG_ModeTypeDef;
+
+/** 
+  * @brief  URB States definition  
+  */ 
+typedef enum {
+  URB_IDLE = 0,
+  URB_DONE,
+  URB_NOTREADY,
+  URB_NYET,
+  URB_ERROR,
+  URB_STALL
+    
+}USB_OTG_URBStateTypeDef;
+
+/** 
+  * @brief  Host channel States  definition  
+  */ 
+typedef enum {
+  HC_IDLE = 0,
+  HC_XFRC,
+  HC_HALTED,
+  HC_NAK,
+  HC_NYET,
+  HC_STALL,
+  HC_XACTERR,  
+  HC_BBLERR,   
+  HC_DATATGLERR
+    
+}USB_OTG_HCStateTypeDef;
+
+/** 
+  * @brief  PCD Initialization Structure definition  
+  */
+typedef struct
+{
+  uint32_t dev_endpoints;        /*!< Device Endpoints number.
+                                      This parameter depends on the used USB core.   
+                                      This parameter must be a number between Min_Data = 1 and Max_Data = 15 */    
+  
+  uint32_t Host_channels;        /*!< Host Channels number.
+                                      This parameter Depends on the used USB core.   
+                                      This parameter must be a number between Min_Data = 1 and Max_Data = 15 */       
+
+  uint32_t speed;                /*!< USB Core speed.
+                                      This parameter can be any value of @ref USB_Core_Speed_                */        
+                               
+  uint32_t dma_enable;           /*!< Enable or disable of the USB embedded DMA.                             */            
+
+  uint32_t ep0_mps;              /*!< Set the Endpoint 0 Max Packet size. 
+                                      This parameter can be any value of @ref USB_EP0_MPS_                   */              
+                       
+  uint32_t phy_itface;           /*!< Select the used PHY interface.
+                                      This parameter can be any value of @ref USB_Core_PHY_                  */ 
+                                
+  uint32_t Sof_enable;           /*!< Enable or disable the output of the SOF signal.                        */     
+                               
+  uint32_t low_power_enable;     /*!< Enable or disable the low power mode.                                  */
+  
+  uint32_t lpm_enable;           /*!< Enable or disable Link Power Management.                               */
+                          
+  uint32_t vbus_sensing_enable;  /*!< Enable or disable the VBUS Sensing feature.                            */ 
+
+  uint32_t use_dedicated_ep1;    /*!< Enable or disable the use of the dedicated EP1 interrupt.              */      
+  
+  uint32_t use_external_vbus;    /*!< Enable or disable the use of the external VBUS.                        */   
+  
+}USB_OTG_CfgTypeDef;
+
+typedef struct
+{
+  uint8_t   num;            /*!< Endpoint number
+                                This parameter must be a number between Min_Data = 1 and Max_Data = 15    */ 
+                                
+  uint8_t   is_in;          /*!< Endpoint direction
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1     */ 
+  
+  uint8_t   is_stall;       /*!< Endpoint stall condition
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1     */ 
+  
+  uint8_t   type;           /*!< Endpoint type
+                                 This parameter can be any value of @ref USB_EP_Type_                     */ 
+                                
+  uint8_t   data_pid_start; /*!< Initial data PID
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1     */
+                                
+  uint8_t   even_odd_frame; /*!< IFrame parity
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 1    */
+                                
+  uint16_t  tx_fifo_num;    /*!< Transmission FIFO number
+                                 This parameter must be a number between Min_Data = 1 and Max_Data = 15   */
+                                
+  uint32_t  maxpacket;      /*!< Endpoint Max packet size
+                                 This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+  uint8_t   *xfer_buff;     /*!< Pointer to transfer buffer                                               */
+                                
+  uint32_t  dma_addr;       /*!< 32 bits aligned transfer buffer address                                  */
+  
+  uint32_t  xfer_len;       /*!< Current transfer length                                                  */
+  
+  uint32_t  xfer_count;     /*!< Partial transfer length in case of multi packet transfer                 */
+
+}USB_OTG_EPTypeDef;
+
+typedef struct
+{
+  uint8_t   dev_addr ;     /*!< USB device address.
+                                This parameter must be a number between Min_Data = 1 and Max_Data = 255    */ 
+
+  uint8_t   ch_num;        /*!< Host channel number.
+                                This parameter must be a number between Min_Data = 1 and Max_Data = 15     */ 
+                                
+  uint8_t   ep_num;        /*!< Endpoint number.
+                                This parameter must be a number between Min_Data = 1 and Max_Data = 15     */ 
+                                
+  uint8_t   ep_is_in;      /*!< Endpoint direction
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1      */ 
+                                
+  uint8_t   speed;         /*!< USB Host speed.
+                                This parameter can be any value of @ref USB_Core_Speed_                    */
+                                
+  uint8_t   do_ping;       /*!< Enable or disable the use of the PING protocol for HS mode.                */
+  
+  uint8_t   process_ping;  /*!< Execute the PING protocol for HS mode.                                     */
+
+  uint8_t   ep_type;       /*!< Endpoint Type.
+                                This parameter can be any value of @ref USB_EP_Type_                       */
+                                
+  uint16_t  max_packet;    /*!< Endpoint Max packet size.
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 64KB   */
+                                
+  uint8_t   data_pid;      /*!< Initial data PID.
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+                                
+  uint8_t   *xfer_buff;    /*!< Pointer to transfer buffer.                                                */
+  
+  uint32_t  xfer_len;      /*!< Current transfer length.                                                   */
+  
+  uint32_t  xfer_count;    /*!< Partial transfer length in case of multi packet transfer.                  */
+  
+  uint8_t   toggle_in;     /*!< IN transfer current toggle flag.
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+                                
+  uint8_t   toggle_out;    /*!< OUT transfer current toggle flag
+                                This parameter must be a number between Min_Data = 0 and Max_Data = 1      */
+  
+  uint32_t  dma_addr;      /*!< 32 bits aligned transfer buffer address.                                   */
+  
+  uint32_t  ErrCnt;        /*!< Host channel error count.*/
+  
+  USB_OTG_URBStateTypeDef  urb_state;  /*!< URB state. 
+                                           This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ 
+  
+  USB_OTG_HCStateTypeDef   state;     /*!< Host Channel state. 
+                                           This parameter can be any value of @ref USB_OTG_HCStateTypeDef  */ 
+                                             
+}USB_OTG_HCTypeDef;
+  
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+  * @{
+  */
+
+/** @defgroup USB_Core_Mode_ USB Core Mode
+  * @{
+  */
+#define USB_OTG_MODE_DEVICE                    0
+#define USB_OTG_MODE_HOST                      1
+#define USB_OTG_MODE_DRD                       2
+/**
+  * @}
+  */
+
+/** @defgroup USB_Core_Speed_   USB Core Speed
+  * @{
+  */  
+#define USB_OTG_SPEED_HIGH                     0
+#define USB_OTG_SPEED_HIGH_IN_FULL             1
+#define USB_OTG_SPEED_LOW                      2  
+#define USB_OTG_SPEED_FULL                     3
+/**
+  * @}
+  */
+  
+/** @defgroup USB_Core_PHY_   USB Core PHY
+  * @{
+  */   
+#define USB_OTG_ULPI_PHY                       1
+#define USB_OTG_EMBEDDED_PHY                   2
+/**
+  * @}
+  */
+  
+/** @defgroup USB_Core_MPS_   USB Core MPS
+  * @{
+  */
+#define USB_OTG_HS_MAX_PACKET_SIZE           512
+#define USB_OTG_FS_MAX_PACKET_SIZE           64
+#define USB_OTG_MAX_EP0_SIZE                 64
+/**
+  * @}
+  */
+
+/** @defgroup USB_Core_Phy_Frequency_   USB Core Phy Frequency
+  * @{
+  */
+#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ     (0 << 1)
+#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ     (1 << 1)
+#define DSTS_ENUMSPD_LS_PHY_6MHZ               (2 << 1)
+#define DSTS_ENUMSPD_FS_PHY_48MHZ              (3 << 1)
+/**
+  * @}
+  */
+  
+/** @defgroup USB_CORE_Frame_Interval_   USB CORE Frame Interval
+  * @{
+  */  
+#define DCFG_FRAME_INTERVAL_80                 0
+#define DCFG_FRAME_INTERVAL_85                 1
+#define DCFG_FRAME_INTERVAL_90                 2
+#define DCFG_FRAME_INTERVAL_95                 3
+/**
+  * @}
+  */
+
+/** @defgroup USB_EP0_MPS_  USB EP0 MPS
+  * @{
+  */
+#define DEP0CTL_MPS_64                         0
+#define DEP0CTL_MPS_32                         1
+#define DEP0CTL_MPS_16                         2
+#define DEP0CTL_MPS_8                          3
+/**
+  * @}
+  */
+
+/** @defgroup USB_EP_Speed_  USB EP Speed
+  * @{
+  */
+#define EP_SPEED_LOW                           0
+#define EP_SPEED_FULL                          1
+#define EP_SPEED_HIGH                          2
+/**
+  * @}
+  */
+
+/** @defgroup USB_EP_Type_  USB EP Type
+  * @{
+  */
+#define EP_TYPE_CTRL                           0
+#define EP_TYPE_ISOC                           1
+#define EP_TYPE_BULK                           2
+#define EP_TYPE_INTR                           3
+#define EP_TYPE_MSK                            3
+/**
+  * @}
+  */
+
+/** @defgroup USB_STS_Defines_   USB STS Defines
+  * @{
+  */
+#define STS_GOUT_NAK                           1
+#define STS_DATA_UPDT                          2
+#define STS_XFER_COMP                          3
+#define STS_SETUP_COMP                         4
+#define STS_SETUP_UPDT                         6
+/**
+  * @}
+  */
+
+/** @defgroup HCFG_SPEED_Defines_   HCFG SPEED Defines
+  * @{
+  */  
+#define HCFG_30_60_MHZ                         0
+#define HCFG_48_MHZ                            1
+#define HCFG_6_MHZ                             2
+/**
+  * @}
+  */
+    
+/** @defgroup HPRT0_PRTSPD_SPEED_Defines_  HPRT0 PRTSPD SPEED Defines
+  * @{
+  */    
+#define HPRT0_PRTSPD_HIGH_SPEED                0
+#define HPRT0_PRTSPD_FULL_SPEED                1
+#define HPRT0_PRTSPD_LOW_SPEED                 2
+/**
+  * @}
+  */  
+   
+#define HCCHAR_CTRL                            0
+#define HCCHAR_ISOC                            1
+#define HCCHAR_BULK                            2
+#define HCCHAR_INTR                            3
+       
+#define HC_PID_DATA0                           0
+#define HC_PID_DATA2                           1
+#define HC_PID_DATA1                           2
+#define HC_PID_SETUP                           3
+
+#define GRXSTS_PKTSTS_IN                       2
+#define GRXSTS_PKTSTS_IN_XFER_COMP             3
+#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR          5
+#define GRXSTS_PKTSTS_CH_HALTED                7
+    
+#define USBx_PCGCCTL    *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
+#define USBx_HPRT0      *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
+
+#define USBx_DEVICE     ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE)) 
+#define USBx_INEP(i)    ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))        
+#define USBx_OUTEP(i)   ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))        
+#define USBx_DFIFO(i)   *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
+
+#define USBx_HOST       ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))  
+#define USBx_HC(i)      ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
+/**
+  * @}
+  */
+/* Exported macro ------------------------------------------------------------*/
+#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)     ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
+#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__)   ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
+    
+#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__)          (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
+#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__)         (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))  
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode);
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
+HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
+void *            USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
+HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
+uint8_t           USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+uint32_t          USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+void              USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
+
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
+uint32_t          USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
+uint32_t          USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,  
+                                  uint8_t ch_num,
+                                  uint8_t epnum,
+                                  uint8_t dev_address,
+                                  uint8_t speed,
+                                  uint8_t ep_type,
+                                  uint16_t mps);
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
+uint32_t          USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F7xx_LL_USB_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/arm_common_tables.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,136 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date:        19. March 2015
+* $Revision: 	V.1.4.5
+*
+* Project: 	    CMSIS DSP Library
+* Title:	    arm_common_tables.h
+*
+* Description:	This file has extern declaration for common tables like Bitreverse, reciprocal etc which are used across different functions
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_COMMON_TABLES_H
+#define _ARM_COMMON_TABLES_H
+
+#include "arm_math.h"
+
+extern const uint16_t armBitRevTable[1024];
+extern const q15_t armRecipTableQ15[64];
+extern const q31_t armRecipTableQ31[64];
+//extern const q31_t realCoefAQ31[1024];
+//extern const q31_t realCoefBQ31[1024];
+extern const float32_t twiddleCoef_16[32];
+extern const float32_t twiddleCoef_32[64];
+extern const float32_t twiddleCoef_64[128];
+extern const float32_t twiddleCoef_128[256];
+extern const float32_t twiddleCoef_256[512];
+extern const float32_t twiddleCoef_512[1024];
+extern const float32_t twiddleCoef_1024[2048];
+extern const float32_t twiddleCoef_2048[4096];
+extern const float32_t twiddleCoef_4096[8192];
+#define twiddleCoef twiddleCoef_4096
+extern const q31_t twiddleCoef_16_q31[24];
+extern const q31_t twiddleCoef_32_q31[48];
+extern const q31_t twiddleCoef_64_q31[96];
+extern const q31_t twiddleCoef_128_q31[192];
+extern const q31_t twiddleCoef_256_q31[384];
+extern const q31_t twiddleCoef_512_q31[768];
+extern const q31_t twiddleCoef_1024_q31[1536];
+extern const q31_t twiddleCoef_2048_q31[3072];
+extern const q31_t twiddleCoef_4096_q31[6144];
+extern const q15_t twiddleCoef_16_q15[24];
+extern const q15_t twiddleCoef_32_q15[48];
+extern const q15_t twiddleCoef_64_q15[96];
+extern const q15_t twiddleCoef_128_q15[192];
+extern const q15_t twiddleCoef_256_q15[384];
+extern const q15_t twiddleCoef_512_q15[768];
+extern const q15_t twiddleCoef_1024_q15[1536];
+extern const q15_t twiddleCoef_2048_q15[3072];
+extern const q15_t twiddleCoef_4096_q15[6144];
+extern const float32_t twiddleCoef_rfft_32[32];
+extern const float32_t twiddleCoef_rfft_64[64];
+extern const float32_t twiddleCoef_rfft_128[128];
+extern const float32_t twiddleCoef_rfft_256[256];
+extern const float32_t twiddleCoef_rfft_512[512];
+extern const float32_t twiddleCoef_rfft_1024[1024];
+extern const float32_t twiddleCoef_rfft_2048[2048];
+extern const float32_t twiddleCoef_rfft_4096[4096];
+
+
+/* floating-point bit reversal tables */
+#define ARMBITREVINDEXTABLE__16_TABLE_LENGTH ((uint16_t)20  )
+#define ARMBITREVINDEXTABLE__32_TABLE_LENGTH ((uint16_t)48  )
+#define ARMBITREVINDEXTABLE__64_TABLE_LENGTH ((uint16_t)56  )
+#define ARMBITREVINDEXTABLE_128_TABLE_LENGTH ((uint16_t)208 )
+#define ARMBITREVINDEXTABLE_256_TABLE_LENGTH ((uint16_t)440 )
+#define ARMBITREVINDEXTABLE_512_TABLE_LENGTH ((uint16_t)448 )
+#define ARMBITREVINDEXTABLE1024_TABLE_LENGTH ((uint16_t)1800)
+#define ARMBITREVINDEXTABLE2048_TABLE_LENGTH ((uint16_t)3808)
+#define ARMBITREVINDEXTABLE4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable16[ARMBITREVINDEXTABLE__16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable32[ARMBITREVINDEXTABLE__32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable64[ARMBITREVINDEXTABLE__64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable128[ARMBITREVINDEXTABLE_128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable256[ARMBITREVINDEXTABLE_256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable512[ARMBITREVINDEXTABLE_512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable1024[ARMBITREVINDEXTABLE1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable2048[ARMBITREVINDEXTABLE2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable4096[ARMBITREVINDEXTABLE4096_TABLE_LENGTH];
+
+/* fixed-point bit reversal tables */
+#define ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH ((uint16_t)12  )
+#define ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH ((uint16_t)24  )
+#define ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH ((uint16_t)56  )
+#define ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH ((uint16_t)112 )
+#define ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH ((uint16_t)240 )
+#define ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH ((uint16_t)480 )
+#define ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH ((uint16_t)992 )
+#define ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH ((uint16_t)1984)
+#define ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH ((uint16_t)4032)
+
+extern const uint16_t armBitRevIndexTable_fixed_16[ARMBITREVINDEXTABLE_FIXED___16_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_32[ARMBITREVINDEXTABLE_FIXED___32_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_64[ARMBITREVINDEXTABLE_FIXED___64_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_128[ARMBITREVINDEXTABLE_FIXED__128_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_256[ARMBITREVINDEXTABLE_FIXED__256_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_512[ARMBITREVINDEXTABLE_FIXED__512_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_1024[ARMBITREVINDEXTABLE_FIXED_1024_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_2048[ARMBITREVINDEXTABLE_FIXED_2048_TABLE_LENGTH];
+extern const uint16_t armBitRevIndexTable_fixed_4096[ARMBITREVINDEXTABLE_FIXED_4096_TABLE_LENGTH];
+
+/* Tables for Fast Math Sine and Cosine */
+extern const float32_t sinTable_f32[FAST_MATH_TABLE_SIZE + 1];
+extern const q31_t sinTable_q31[FAST_MATH_TABLE_SIZE + 1];
+extern const q15_t sinTable_q15[FAST_MATH_TABLE_SIZE + 1];
+
+#endif /*  ARM_COMMON_TABLES_H */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/arm_const_structs.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,79 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2014 ARM Limited. All rights reserved.
+*
+* $Date:        19. March 2015
+* $Revision: 	V.1.4.5
+*
+* Project: 	    CMSIS DSP Library
+* Title:	    arm_const_structs.h
+*
+* Description:	This file has constant structs that are initialized for
+*              user convenience.  For example, some can be given as
+*              arguments to the arm_cfft_f32() function.
+*
+* Target Processor: Cortex-M4/Cortex-M3
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+* -------------------------------------------------------------------- */
+
+#ifndef _ARM_CONST_STRUCTS_H
+#define _ARM_CONST_STRUCTS_H
+
+#include "arm_math.h"
+#include "arm_common_tables.h"
+
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len16;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len32;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len64;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len128;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len256;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len512;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len1024;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len2048;
+   extern const arm_cfft_instance_f32 arm_cfft_sR_f32_len4096;
+
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len16;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len32;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len64;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len128;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len256;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len512;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len1024;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len2048;
+   extern const arm_cfft_instance_q31 arm_cfft_sR_q31_len4096;
+
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len16;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len32;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len64;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len128;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len256;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len512;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len1024;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len2048;
+   extern const arm_cfft_instance_q15 arm_cfft_sR_q15_len4096;
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/arm_math.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,7556 @@
+/* ----------------------------------------------------------------------
+* Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+*
+* $Date:        19. March 2015
+* $Revision: 	V.1.4.5
+*
+* Project: 	    CMSIS DSP Library
+* Title:	    arm_math.h
+*
+* Description:	Public header file for CMSIS DSP Library
+*
+* Target Processor: Cortex-M7/Cortex-M4/Cortex-M3/Cortex-M0
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*   - Redistributions of source code must retain the above copyright
+*     notice, this list of conditions and the following disclaimer.
+*   - Redistributions in binary form must reproduce the above copyright
+*     notice, this list of conditions and the following disclaimer in
+*     the documentation and/or other materials provided with the
+*     distribution.
+*   - Neither the name of ARM LIMITED nor the names of its contributors
+*     may be used to endorse or promote products derived from this
+*     software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+* POSSIBILITY OF SUCH DAMAGE.
+ * -------------------------------------------------------------------- */
+
+/**
+   \mainpage CMSIS DSP Software Library
+   *
+   * Introduction
+   * ------------
+   *
+   * This user manual describes the CMSIS DSP software library,
+   * a suite of common signal processing functions for use on Cortex-M processor based devices.
+   *
+   * The library is divided into a number of functions each covering a specific category:
+   * - Basic math functions
+   * - Fast math functions
+   * - Complex math functions
+   * - Filters
+   * - Matrix functions
+   * - Transforms
+   * - Motor control functions
+   * - Statistical functions
+   * - Support functions
+   * - Interpolation functions
+   *
+   * The library has separate functions for operating on 8-bit integers, 16-bit integers,
+   * 32-bit integer and 32-bit floating-point values.
+   *
+   * Using the Library
+   * ------------
+   *
+   * The library installer contains prebuilt versions of the libraries in the <code>Lib</code> folder.
+   * - arm_cortexM7lfdp_math.lib (Little endian and Double Precision Floating Point Unit on Cortex-M7)
+   * - arm_cortexM7bfdp_math.lib (Big endian and Double Precision Floating Point Unit on Cortex-M7)
+   * - arm_cortexM7lfsp_math.lib (Little endian and Single Precision Floating Point Unit on Cortex-M7)
+   * - arm_cortexM7bfsp_math.lib (Big endian and Single Precision Floating Point Unit on Cortex-M7)
+   * - arm_cortexM7l_math.lib (Little endian on Cortex-M7)
+   * - arm_cortexM7b_math.lib (Big endian on Cortex-M7)
+   * - arm_cortexM4lf_math.lib (Little endian and Floating Point Unit on Cortex-M4)
+   * - arm_cortexM4bf_math.lib (Big endian and Floating Point Unit on Cortex-M4)
+   * - arm_cortexM4l_math.lib (Little endian on Cortex-M4)
+   * - arm_cortexM4b_math.lib (Big endian on Cortex-M4)
+   * - arm_cortexM3l_math.lib (Little endian on Cortex-M3)
+   * - arm_cortexM3b_math.lib (Big endian on Cortex-M3)
+   * - arm_cortexM0l_math.lib (Little endian on Cortex-M0 / CortexM0+)
+   * - arm_cortexM0b_math.lib (Big endian on Cortex-M0 / CortexM0+)
+   *
+   * The library functions are declared in the public file <code>arm_math.h</code> which is placed in the <code>Include</code> folder.
+   * Simply include this file and link the appropriate library in the application and begin calling the library functions. The Library supports single
+   * public header file <code> arm_math.h</code> for Cortex-M7/M4/M3/M0/M0+ with little endian and big endian. Same header file will be used for floating point unit(FPU) variants.
+   * Define the appropriate pre processor MACRO ARM_MATH_CM7 or ARM_MATH_CM4 or  ARM_MATH_CM3 or
+   * ARM_MATH_CM0 or ARM_MATH_CM0PLUS depending on the target processor in the application.
+   *
+   * Examples
+   * --------
+   *
+   * The library ships with a number of examples which demonstrate how to use the library functions.
+   *
+   * Toolchain Support
+   * ------------
+   *
+   * The library has been developed and tested with MDK-ARM version 5.14.0.0
+   * The library is being tested in GCC and IAR toolchains and updates on this activity will be made available shortly.
+   *
+   * Building the Library
+   * ------------
+   *
+   * The library installer contains a project file to re build libraries on MDK-ARM Tool chain in the <code>CMSIS\\DSP_Lib\\Source\\ARM</code> folder.
+   * - arm_cortexM_math.uvprojx
+   *
+   *
+   * The libraries can be built by opening the arm_cortexM_math.uvprojx project in MDK-ARM, selecting a specific target, and defining the optional pre processor MACROs detailed above.
+   *
+   * Pre-processor Macros
+   * ------------
+   *
+   * Each library project have differant pre-processor macros.
+   *
+   * - UNALIGNED_SUPPORT_DISABLE:
+   *
+   * Define macro UNALIGNED_SUPPORT_DISABLE, If the silicon does not support unaligned memory access
+   *
+   * - ARM_MATH_BIG_ENDIAN:
+   *
+   * Define macro ARM_MATH_BIG_ENDIAN to build the library for big endian targets. By default library builds for little endian targets.
+   *
+   * - ARM_MATH_MATRIX_CHECK:
+   *
+   * Define macro ARM_MATH_MATRIX_CHECK for checking on the input and output sizes of matrices
+   *
+   * - ARM_MATH_ROUNDING:
+   *
+   * Define macro ARM_MATH_ROUNDING for rounding on support functions
+   *
+   * - ARM_MATH_CMx:
+   *
+   * Define macro ARM_MATH_CM4 for building the library on Cortex-M4 target, ARM_MATH_CM3 for building library on Cortex-M3 target
+   * and ARM_MATH_CM0 for building library on Cortex-M0 target, ARM_MATH_CM0PLUS for building library on Cortex-M0+ target, and
+   * ARM_MATH_CM7 for building the library on cortex-M7.
+   *
+   * - __FPU_PRESENT:
+   *
+   * Initialize macro __FPU_PRESENT = 1 when building on FPU supported Targets. Enable this macro for M4bf and M4lf libraries
+   *
+   * <hr>
+   * CMSIS-DSP in ARM::CMSIS Pack
+   * -----------------------------
+   * 
+   * The following files relevant to CMSIS-DSP are present in the <b>ARM::CMSIS</b> Pack directories:
+   * |File/Folder                   |Content                                                                 |
+   * |------------------------------|------------------------------------------------------------------------|
+   * |\b CMSIS\\Documentation\\DSP  | This documentation                                                     |
+   * |\b CMSIS\\DSP_Lib             | Software license agreement (license.txt)                               |
+   * |\b CMSIS\\DSP_Lib\\Examples   | Example projects demonstrating the usage of the library functions      |
+   * |\b CMSIS\\DSP_Lib\\Source     | Source files for rebuilding the library                                |
+   * 
+   * <hr>
+   * Revision History of CMSIS-DSP
+   * ------------
+   * Please refer to \ref ChangeLog_pg.
+   *
+   * Copyright Notice
+   * ------------
+   *
+   * Copyright (C) 2010-2015 ARM Limited. All rights reserved.
+   */
+
+
+/**
+ * @defgroup groupMath Basic Math Functions
+ */
+
+/**
+ * @defgroup groupFastMath Fast Math Functions
+ * This set of functions provides a fast approximation to sine, cosine, and square root.
+ * As compared to most of the other functions in the CMSIS math library, the fast math functions
+ * operate on individual values and not arrays.
+ * There are separate functions for Q15, Q31, and floating-point data.
+ *
+ */
+
+/**
+ * @defgroup groupCmplxMath Complex Math Functions
+ * This set of functions operates on complex data vectors.
+ * The data in the complex arrays is stored in an interleaved fashion
+ * (real, imag, real, imag, ...).
+ * In the API functions, the number of samples in a complex array refers
+ * to the number of complex values; the array contains twice this number of
+ * real values.
+ */
+
+/**
+ * @defgroup groupFilters Filtering Functions
+ */
+
+/**
+ * @defgroup groupMatrix Matrix Functions
+ *
+ * This set of functions provides basic matrix math operations.
+ * The functions operate on matrix data structures.  For example,
+ * the type
+ * definition for the floating-point matrix structure is shown
+ * below:
+ * <pre>
+ *     typedef struct
+ *     {
+ *       uint16_t numRows;     // number of rows of the matrix.
+ *       uint16_t numCols;     // number of columns of the matrix.
+ *       float32_t *pData;     // points to the data of the matrix.
+ *     } arm_matrix_instance_f32;
+ * </pre>
+ * There are similar definitions for Q15 and Q31 data types.
+ *
+ * The structure specifies the size of the matrix and then points to
+ * an array of data.  The array is of size <code>numRows X numCols</code>
+ * and the values are arranged in row order.  That is, the
+ * matrix element (i, j) is stored at:
+ * <pre>
+ *     pData[i*numCols + j]
+ * </pre>
+ *
+ * \par Init Functions
+ * There is an associated initialization function for each type of matrix
+ * data structure.
+ * The initialization function sets the values of the internal structure fields.
+ * Refer to the function <code>arm_mat_init_f32()</code>, <code>arm_mat_init_q31()</code>
+ * and <code>arm_mat_init_q15()</code> for floating-point, Q31 and Q15 types,  respectively.
+ *
+ * \par
+ * Use of the initialization function is optional. However, if initialization function is used
+ * then the instance structure cannot be placed into a const data section.
+ * To place the instance structure in a const data
+ * section, manually initialize the data structure.  For example:
+ * <pre>
+ * <code>arm_matrix_instance_f32 S = {nRows, nColumns, pData};</code>
+ * <code>arm_matrix_instance_q31 S = {nRows, nColumns, pData};</code>
+ * <code>arm_matrix_instance_q15 S = {nRows, nColumns, pData};</code>
+ * </pre>
+ * where <code>nRows</code> specifies the number of rows, <code>nColumns</code>
+ * specifies the number of columns, and <code>pData</code> points to the
+ * data array.
+ *
+ * \par Size Checking
+ * By default all of the matrix functions perform size checking on the input and
+ * output matrices.  For example, the matrix addition function verifies that the
+ * two input matrices and the output matrix all have the same number of rows and
+ * columns.  If the size check fails the functions return:
+ * <pre>
+ *     ARM_MATH_SIZE_MISMATCH
+ * </pre>
+ * Otherwise the functions return
+ * <pre>
+ *     ARM_MATH_SUCCESS
+ * </pre>
+ * There is some overhead associated with this matrix size checking.
+ * The matrix size checking is enabled via the \#define
+ * <pre>
+ *     ARM_MATH_MATRIX_CHECK
+ * </pre>
+ * within the library project settings.  By default this macro is defined
+ * and size checking is enabled.  By changing the project settings and
+ * undefining this macro size checking is eliminated and the functions
+ * run a bit faster.  With size checking disabled the functions always
+ * return <code>ARM_MATH_SUCCESS</code>.
+ */
+
+/**
+ * @defgroup groupTransforms Transform Functions
+ */
+
+/**
+ * @defgroup groupController Controller Functions
+ */
+
+/**
+ * @defgroup groupStats Statistics Functions
+ */
+/**
+ * @defgroup groupSupport Support Functions
+ */
+
+/**
+ * @defgroup groupInterpolation Interpolation Functions
+ * These functions perform 1- and 2-dimensional interpolation of data.
+ * Linear interpolation is used for 1-dimensional data and
+ * bilinear interpolation is used for 2-dimensional data.
+ */
+
+/**
+ * @defgroup groupExamples Examples
+ */
+#ifndef _ARM_MATH_H
+#define _ARM_MATH_H
+
+#define __CMSIS_GENERIC         /* disable NVIC and Systick functions */
+
+#if defined(ARM_MATH_CM7)
+  #include "core_cm7.h"
+#elif defined (ARM_MATH_CM4)
+  #include "core_cm4.h"
+#elif defined (ARM_MATH_CM3)
+  #include "core_cm3.h"
+#elif defined (ARM_MATH_CM0)
+  #include "core_cm0.h"
+#define ARM_MATH_CM0_FAMILY
+  #elif defined (ARM_MATH_CM0PLUS)
+#include "core_cm0plus.h"
+  #define ARM_MATH_CM0_FAMILY
+#else
+  #error "Define according the used Cortex core ARM_MATH_CM7, ARM_MATH_CM4, ARM_MATH_CM3, ARM_MATH_CM0PLUS or ARM_MATH_CM0"
+#endif
+
+#undef  __CMSIS_GENERIC         /* enable NVIC and Systick functions */
+#include "string.h"
+#include "math.h"
+#ifdef	__cplusplus
+extern "C"
+{
+#endif
+
+
+  /**
+   * @brief Macros required for reciprocal calculation in Normalized LMS
+   */
+
+#define DELTA_Q31 			(0x100)
+#define DELTA_Q15 			0x5
+#define INDEX_MASK 			0x0000003F
+#ifndef PI
+#define PI					3.14159265358979f
+#endif
+
+  /**
+   * @brief Macros required for SINE and COSINE Fast math approximations
+   */
+
+#define FAST_MATH_TABLE_SIZE  512
+#define FAST_MATH_Q31_SHIFT   (32 - 10)
+#define FAST_MATH_Q15_SHIFT   (16 - 10)
+#define CONTROLLER_Q31_SHIFT  (32 - 9)
+#define TABLE_SIZE  256
+#define TABLE_SPACING_Q31	   0x400000
+#define TABLE_SPACING_Q15	   0x80
+
+  /**
+   * @brief Macros required for SINE and COSINE Controller functions
+   */
+  /* 1.31(q31) Fixed value of 2/360 */
+  /* -1 to +1 is divided into 360 values so total spacing is (2/360) */
+#define INPUT_SPACING			0xB60B61
+
+  /**
+   * @brief Macro for Unaligned Support
+   */
+#ifndef UNALIGNED_SUPPORT_DISABLE
+    #define ALIGN4
+#else
+  #if defined  (__GNUC__)
+    #define ALIGN4 __attribute__((aligned(4)))
+  #else
+    #define ALIGN4 __align(4)
+  #endif
+#endif	/*	#ifndef UNALIGNED_SUPPORT_DISABLE	*/
+
+  /**
+   * @brief Error status returned by some functions in the library.
+   */
+
+  typedef enum
+  {
+    ARM_MATH_SUCCESS = 0,                /**< No error */
+    ARM_MATH_ARGUMENT_ERROR = -1,        /**< One or more arguments are incorrect */
+    ARM_MATH_LENGTH_ERROR = -2,          /**< Length of data buffer is incorrect */
+    ARM_MATH_SIZE_MISMATCH = -3,         /**< Size of matrices is not compatible with the operation. */
+    ARM_MATH_NANINF = -4,                /**< Not-a-number (NaN) or infinity is generated */
+    ARM_MATH_SINGULAR = -5,              /**< Generated by matrix inversion if the input matrix is singular and cannot be inverted. */
+    ARM_MATH_TEST_FAILURE = -6           /**< Test Failed  */
+  } arm_status;
+
+  /**
+   * @brief 8-bit fractional data type in 1.7 format.
+   */
+  typedef int8_t q7_t;
+
+  /**
+   * @brief 16-bit fractional data type in 1.15 format.
+   */
+  typedef int16_t q15_t;
+
+  /**
+   * @brief 32-bit fractional data type in 1.31 format.
+   */
+  typedef int32_t q31_t;
+
+  /**
+   * @brief 64-bit fractional data type in 1.63 format.
+   */
+  typedef int64_t q63_t;
+
+  /**
+   * @brief 32-bit floating-point type definition.
+   */
+  typedef float float32_t;
+
+  /**
+   * @brief 64-bit floating-point type definition.
+   */
+  typedef double float64_t;
+
+  /**
+   * @brief definition to read/write two 16 bit values.
+   */
+#if defined __CC_ARM
+  #define __SIMD32_TYPE int32_t __packed
+  #define CMSIS_UNUSED __attribute__((unused))
+#elif defined __ICCARM__
+  #define __SIMD32_TYPE int32_t __packed
+  #define CMSIS_UNUSED
+#elif defined __GNUC__
+  #define __SIMD32_TYPE int32_t
+  #define CMSIS_UNUSED __attribute__((unused))
+#elif defined __CSMC__			/* Cosmic */
+  #define __SIMD32_TYPE int32_t
+  #define CMSIS_UNUSED
+#elif defined __TASKING__
+  #define __SIMD32_TYPE __unaligned int32_t
+  #define CMSIS_UNUSED
+#else
+  #error Unknown compiler
+#endif
+
+#define __SIMD32(addr)  (*(__SIMD32_TYPE **) & (addr))
+#define __SIMD32_CONST(addr)  ((__SIMD32_TYPE *)(addr))
+
+#define _SIMD32_OFFSET(addr)  (*(__SIMD32_TYPE *)  (addr))
+
+#define __SIMD64(addr)  (*(int64_t **) & (addr))
+
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+  /**
+   * @brief definition to pack two 16 bit values.
+   */
+#define __PKHBT(ARG1, ARG2, ARG3)      ( (((int32_t)(ARG1) <<  0) & (int32_t)0x0000FFFF) | \
+                                         (((int32_t)(ARG2) << ARG3) & (int32_t)0xFFFF0000)  )
+#define __PKHTB(ARG1, ARG2, ARG3)      ( (((int32_t)(ARG1) <<  0) & (int32_t)0xFFFF0000) | \
+                                         (((int32_t)(ARG2) >> ARG3) & (int32_t)0x0000FFFF)  )
+
+#endif
+
+
+   /**
+   * @brief definition to pack four 8 bit values.
+   */
+#ifndef ARM_MATH_BIG_ENDIAN
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v0) <<  0) & (int32_t)0x000000FF) |	\
+                                (((int32_t)(v1) <<  8) & (int32_t)0x0000FF00) |	\
+							    (((int32_t)(v2) << 16) & (int32_t)0x00FF0000) |	\
+							    (((int32_t)(v3) << 24) & (int32_t)0xFF000000)  )
+#else
+
+#define __PACKq7(v0,v1,v2,v3) ( (((int32_t)(v3) <<  0) & (int32_t)0x000000FF) |	\
+                                (((int32_t)(v2) <<  8) & (int32_t)0x0000FF00) |	\
+							    (((int32_t)(v1) << 16) & (int32_t)0x00FF0000) |	\
+							    (((int32_t)(v0) << 24) & (int32_t)0xFF000000)  )
+
+#endif
+
+
+  /**
+   * @brief Clips Q63 to Q31 values.
+   */
+  static __INLINE q31_t clip_q63_to_q31(
+  q63_t x)
+  {
+    return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+      ((0x7FFFFFFF ^ ((q31_t) (x >> 63)))) : (q31_t) x;
+  }
+
+  /**
+   * @brief Clips Q63 to Q15 values.
+   */
+  static __INLINE q15_t clip_q63_to_q15(
+  q63_t x)
+  {
+    return ((q31_t) (x >> 32) != ((q31_t) x >> 31)) ?
+      ((0x7FFF ^ ((q15_t) (x >> 63)))) : (q15_t) (x >> 15);
+  }
+
+  /**
+   * @brief Clips Q31 to Q7 values.
+   */
+  static __INLINE q7_t clip_q31_to_q7(
+  q31_t x)
+  {
+    return ((q31_t) (x >> 24) != ((q31_t) x >> 23)) ?
+      ((0x7F ^ ((q7_t) (x >> 31)))) : (q7_t) x;
+  }
+
+  /**
+   * @brief Clips Q31 to Q15 values.
+   */
+  static __INLINE q15_t clip_q31_to_q15(
+  q31_t x)
+  {
+    return ((q31_t) (x >> 16) != ((q31_t) x >> 15)) ?
+      ((0x7FFF ^ ((q15_t) (x >> 31)))) : (q15_t) x;
+  }
+
+  /**
+   * @brief Multiplies 32 X 64 and returns 32 bit result in 2.30 format.
+   */
+
+  static __INLINE q63_t mult32x64(
+  q63_t x,
+  q31_t y)
+  {
+    return ((((q63_t) (x & 0x00000000FFFFFFFF) * y) >> 32) +
+            (((q63_t) (x >> 32) * y)));
+  }
+
+
+//#if defined (ARM_MATH_CM0_FAMILY) && defined ( __CC_ARM   )
+//#define __CLZ __clz
+//#endif
+
+//note: function can be removed when all toolchain support __CLZ for Cortex-M0
+#if defined (ARM_MATH_CM0_FAMILY) && ((defined (__ICCARM__))  )
+
+  static __INLINE uint32_t __CLZ(
+  q31_t data);
+
+
+  static __INLINE uint32_t __CLZ(
+  q31_t data)
+  {
+    uint32_t count = 0;
+    uint32_t mask = 0x80000000;
+
+    while((data & mask) == 0)
+    {
+      count += 1u;
+      mask = mask >> 1u;
+    }
+
+    return (count);
+
+  }
+
+#endif
+
+  /**
+   * @brief Function to Calculates 1/in (reciprocal) value of Q31 Data type.
+   */
+
+  static __INLINE uint32_t arm_recip_q31(
+  q31_t in,
+  q31_t * dst,
+  q31_t * pRecipTable)
+  {
+
+    uint32_t out, tempVal;
+    uint32_t index, i;
+    uint32_t signBits;
+
+    if(in > 0)
+    {
+      signBits = __CLZ(in) - 1;
+    }
+    else
+    {
+      signBits = __CLZ(-in) - 1;
+    }
+
+    /* Convert input sample to 1.31 format */
+    in = in << signBits;
+
+    /* calculation of index for initial approximated Val */
+    index = (uint32_t) (in >> 24u);
+    index = (index & INDEX_MASK);
+
+    /* 1.31 with exp 1 */
+    out = pRecipTable[index];
+
+    /* calculation of reciprocal value */
+    /* running approximation for two iterations */
+    for (i = 0u; i < 2u; i++)
+    {
+      tempVal = (q31_t) (((q63_t) in * out) >> 31u);
+      tempVal = 0x7FFFFFFF - tempVal;
+      /*      1.31 with exp 1 */
+      //out = (q31_t) (((q63_t) out * tempVal) >> 30u);
+      out = (q31_t) clip_q63_to_q31(((q63_t) out * tempVal) >> 30u);
+    }
+
+    /* write output */
+    *dst = out;
+
+    /* return num of signbits of out = 1/in value */
+    return (signBits + 1u);
+
+  }
+
+  /**
+   * @brief Function to Calculates 1/in (reciprocal) value of Q15 Data type.
+   */
+  static __INLINE uint32_t arm_recip_q15(
+  q15_t in,
+  q15_t * dst,
+  q15_t * pRecipTable)
+  {
+
+    uint32_t out = 0, tempVal = 0;
+    uint32_t index = 0, i = 0;
+    uint32_t signBits = 0;
+
+    if(in > 0)
+    {
+      signBits = __CLZ(in) - 17;
+    }
+    else
+    {
+      signBits = __CLZ(-in) - 17;
+    }
+
+    /* Convert input sample to 1.15 format */
+    in = in << signBits;
+
+    /* calculation of index for initial approximated Val */
+    index = in >> 8;
+    index = (index & INDEX_MASK);
+
+    /*      1.15 with exp 1  */
+    out = pRecipTable[index];
+
+    /* calculation of reciprocal value */
+    /* running approximation for two iterations */
+    for (i = 0; i < 2; i++)
+    {
+      tempVal = (q15_t) (((q31_t) in * out) >> 15);
+      tempVal = 0x7FFF - tempVal;
+      /*      1.15 with exp 1 */
+      out = (q15_t) (((q31_t) out * tempVal) >> 14);
+    }
+
+    /* write output */
+    *dst = out;
+
+    /* return num of signbits of out = 1/in value */
+    return (signBits + 1);
+
+  }
+
+
+  /*
+   * @brief C custom defined intrinisic function for only M0 processors
+   */
+#if defined(ARM_MATH_CM0_FAMILY)
+
+  static __INLINE q31_t __SSAT(
+  q31_t x,
+  uint32_t y)
+  {
+    int32_t posMax, negMin;
+    uint32_t i;
+
+    posMax = 1;
+    for (i = 0; i < (y - 1); i++)
+    {
+      posMax = posMax * 2;
+    }
+
+    if(x > 0)
+    {
+      posMax = (posMax - 1);
+
+      if(x > posMax)
+      {
+        x = posMax;
+      }
+    }
+    else
+    {
+      negMin = -posMax;
+
+      if(x < negMin)
+      {
+        x = negMin;
+      }
+    }
+    return (x);
+
+
+  }
+
+#endif /* end of ARM_MATH_CM0_FAMILY */
+
+
+
+  /*
+   * @brief C custom defined intrinsic function for M3 and M0 processors
+   */
+#if defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY)
+
+  /*
+   * @brief C custom defined QADD8 for M3 and M0 processors
+   */
+  static __INLINE q31_t __QADD8(
+  q31_t x,
+  q31_t y)
+  {
+
+    q31_t sum;
+    q7_t r, s, t, u;
+
+    r = (q7_t) x;
+    s = (q7_t) y;
+
+    r = __SSAT((q31_t) (r + s), 8);
+    s = __SSAT(((q31_t) (((x << 16) >> 24) + ((y << 16) >> 24))), 8);
+    t = __SSAT(((q31_t) (((x << 8) >> 24) + ((y << 8) >> 24))), 8);
+    u = __SSAT(((q31_t) ((x >> 24) + (y >> 24))), 8);
+
+    sum =
+      (((q31_t) u << 24) & 0xFF000000) | (((q31_t) t << 16) & 0x00FF0000) |
+      (((q31_t) s << 8) & 0x0000FF00) | (r & 0x000000FF);
+
+    return sum;
+
+  }
+
+  /*
+   * @brief C custom defined QSUB8 for M3 and M0 processors
+   */
+  static __INLINE q31_t __QSUB8(
+  q31_t x,
+  q31_t y)
+  {
+
+    q31_t sum;
+    q31_t r, s, t, u;
+
+    r = (q7_t) x;
+    s = (q7_t) y;
+
+    r = __SSAT((r - s), 8);
+    s = __SSAT(((q31_t) (((x << 16) >> 24) - ((y << 16) >> 24))), 8) << 8;
+    t = __SSAT(((q31_t) (((x << 8) >> 24) - ((y << 8) >> 24))), 8) << 16;
+    u = __SSAT(((q31_t) ((x >> 24) - (y >> 24))), 8) << 24;
+
+    sum =
+      (u & 0xFF000000) | (t & 0x00FF0000) | (s & 0x0000FF00) | (r &
+                                                                0x000000FF);
+
+    return sum;
+  }
+
+  /*
+   * @brief C custom defined QADD16 for M3 and M0 processors
+   */
+
+  /*
+   * @brief C custom defined QADD16 for M3 and M0 processors
+   */
+  static __INLINE q31_t __QADD16(
+  q31_t x,
+  q31_t y)
+  {
+
+    q31_t sum;
+    q31_t r, s;
+
+    r = (q15_t) x;
+    s = (q15_t) y;
+
+    r = __SSAT(r + s, 16);
+    s = __SSAT(((q31_t) ((x >> 16) + (y >> 16))), 16) << 16;
+
+    sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+    return sum;
+
+  }
+
+  /*
+   * @brief C custom defined SHADD16 for M3 and M0 processors
+   */
+  static __INLINE q31_t __SHADD16(
+  q31_t x,
+  q31_t y)
+  {
+
+    q31_t sum;
+    q31_t r, s;
+
+    r = (q15_t) x;
+    s = (q15_t) y;
+
+    r = ((r >> 1) + (s >> 1));
+    s = ((q31_t) ((x >> 17) + (y >> 17))) << 16;
+
+    sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+    return sum;
+
+  }
+
+  /*
+   * @brief C custom defined QSUB16 for M3 and M0 processors
+   */
+  static __INLINE q31_t __QSUB16(
+  q31_t x,
+  q31_t y)
+  {
+
+    q31_t sum;
+    q31_t r, s;
+
+    r = (q15_t) x;
+    s = (q15_t) y;
+
+    r = __SSAT(r - s, 16);
+    s = __SSAT(((q31_t) ((x >> 16) - (y >> 16))), 16) << 16;
+
+    sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+    return sum;
+  }
+
+  /*
+   * @brief C custom defined SHSUB16 for M3 and M0 processors
+   */
+  static __INLINE q31_t __SHSUB16(
+  q31_t x,
+  q31_t y)
+  {
+
+    q31_t diff;
+    q31_t r, s;
+
+    r = (q15_t) x;
+    s = (q15_t) y;
+
+    r = ((r >> 1) - (s >> 1));
+    s = (((x >> 17) - (y >> 17)) << 16);
+
+    diff = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+    return diff;
+  }
+
+  /*
+   * @brief C custom defined QASX for M3 and M0 processors
+   */
+  static __INLINE q31_t __QASX(
+  q31_t x,
+  q31_t y)
+  {
+
+    q31_t sum = 0;
+
+    sum =
+      ((sum +
+        clip_q31_to_q15((q31_t) ((q15_t) (x >> 16) + (q15_t) y))) << 16) +
+      clip_q31_to_q15((q31_t) ((q15_t) x - (q15_t) (y >> 16)));
+
+    return sum;
+  }
+
+  /*
+   * @brief C custom defined SHASX for M3 and M0 processors
+   */
+  static __INLINE q31_t __SHASX(
+  q31_t x,
+  q31_t y)
+  {
+
+    q31_t sum;
+    q31_t r, s;
+
+    r = (q15_t) x;
+    s = (q15_t) y;
+
+    r = ((r >> 1) - (y >> 17));
+    s = (((x >> 17) + (s >> 1)) << 16);
+
+    sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+    return sum;
+  }
+
+
+  /*
+   * @brief C custom defined QSAX for M3 and M0 processors
+   */
+  static __INLINE q31_t __QSAX(
+  q31_t x,
+  q31_t y)
+  {
+
+    q31_t sum = 0;
+
+    sum =
+      ((sum +
+        clip_q31_to_q15((q31_t) ((q15_t) (x >> 16) - (q15_t) y))) << 16) +
+      clip_q31_to_q15((q31_t) ((q15_t) x + (q15_t) (y >> 16)));
+
+    return sum;
+  }
+
+  /*
+   * @brief C custom defined SHSAX for M3 and M0 processors
+   */
+  static __INLINE q31_t __SHSAX(
+  q31_t x,
+  q31_t y)
+  {
+
+    q31_t sum;
+    q31_t r, s;
+
+    r = (q15_t) x;
+    s = (q15_t) y;
+
+    r = ((r >> 1) + (y >> 17));
+    s = (((x >> 17) - (s >> 1)) << 16);
+
+    sum = (s & 0xFFFF0000) | (r & 0x0000FFFF);
+
+    return sum;
+  }
+
+  /*
+   * @brief C custom defined SMUSDX for M3 and M0 processors
+   */
+  static __INLINE q31_t __SMUSDX(
+  q31_t x,
+  q31_t y)
+  {
+
+    return ((q31_t) (((q15_t) x * (q15_t) (y >> 16)) -
+                     ((q15_t) (x >> 16) * (q15_t) y)));
+  }
+
+  /*
+   * @brief C custom defined SMUADX for M3 and M0 processors
+   */
+  static __INLINE q31_t __SMUADX(
+  q31_t x,
+  q31_t y)
+  {
+
+    return ((q31_t) (((q15_t) x * (q15_t) (y >> 16)) +
+                     ((q15_t) (x >> 16) * (q15_t) y)));
+  }
+
+  /*
+   * @brief C custom defined QADD for M3 and M0 processors
+   */
+  static __INLINE q31_t __QADD(
+  q31_t x,
+  q31_t y)
+  {
+    return clip_q63_to_q31((q63_t) x + y);
+  }
+
+  /*
+   * @brief C custom defined QSUB for M3 and M0 processors
+   */
+  static __INLINE q31_t __QSUB(
+  q31_t x,
+  q31_t y)
+  {
+    return clip_q63_to_q31((q63_t) x - y);
+  }
+
+  /*
+   * @brief C custom defined SMLAD for M3 and M0 processors
+   */
+  static __INLINE q31_t __SMLAD(
+  q31_t x,
+  q31_t y,
+  q31_t sum)
+  {
+
+    return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) +
+            ((q15_t) x * (q15_t) y));
+  }
+
+  /*
+   * @brief C custom defined SMLADX for M3 and M0 processors
+   */
+  static __INLINE q31_t __SMLADX(
+  q31_t x,
+  q31_t y,
+  q31_t sum)
+  {
+
+    return (sum + ((q15_t) (x >> 16) * (q15_t) (y)) +
+            ((q15_t) x * (q15_t) (y >> 16)));
+  }
+
+  /*
+   * @brief C custom defined SMLSDX for M3 and M0 processors
+   */
+  static __INLINE q31_t __SMLSDX(
+  q31_t x,
+  q31_t y,
+  q31_t sum)
+  {
+
+    return (sum - ((q15_t) (x >> 16) * (q15_t) (y)) +
+            ((q15_t) x * (q15_t) (y >> 16)));
+  }
+
+  /*
+   * @brief C custom defined SMLALD for M3 and M0 processors
+   */
+  static __INLINE q63_t __SMLALD(
+  q31_t x,
+  q31_t y,
+  q63_t sum)
+  {
+
+    return (sum + ((q15_t) (x >> 16) * (q15_t) (y >> 16)) +
+            ((q15_t) x * (q15_t) y));
+  }
+
+  /*
+   * @brief C custom defined SMLALDX for M3 and M0 processors
+   */
+  static __INLINE q63_t __SMLALDX(
+  q31_t x,
+  q31_t y,
+  q63_t sum)
+  {
+
+    return (sum + ((q15_t) (x >> 16) * (q15_t) y)) +
+      ((q15_t) x * (q15_t) (y >> 16));
+  }
+
+  /*
+   * @brief C custom defined SMUAD for M3 and M0 processors
+   */
+  static __INLINE q31_t __SMUAD(
+  q31_t x,
+  q31_t y)
+  {
+
+    return (((x >> 16) * (y >> 16)) +
+            (((x << 16) >> 16) * ((y << 16) >> 16)));
+  }
+
+  /*
+   * @brief C custom defined SMUSD for M3 and M0 processors
+   */
+  static __INLINE q31_t __SMUSD(
+  q31_t x,
+  q31_t y)
+  {
+
+    return (-((x >> 16) * (y >> 16)) +
+            (((x << 16) >> 16) * ((y << 16) >> 16)));
+  }
+
+
+  /*
+   * @brief C custom defined SXTB16 for M3 and M0 processors
+   */
+  static __INLINE q31_t __SXTB16(
+  q31_t x)
+  {
+
+    return ((((x << 24) >> 24) & 0x0000FFFF) |
+            (((x << 8) >> 8) & 0xFFFF0000));
+  }
+
+
+#endif /* defined (ARM_MATH_CM3) || defined (ARM_MATH_CM0_FAMILY) */
+
+
+  /**
+   * @brief Instance structure for the Q7 FIR filter.
+   */
+  typedef struct
+  {
+    uint16_t numTaps;        /**< number of filter coefficients in the filter. */
+    q7_t *pState;            /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+    q7_t *pCoeffs;           /**< points to the coefficient array. The array is of length numTaps.*/
+  } arm_fir_instance_q7;
+
+  /**
+   * @brief Instance structure for the Q15 FIR filter.
+   */
+  typedef struct
+  {
+    uint16_t numTaps;         /**< number of filter coefficients in the filter. */
+    q15_t *pState;            /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+    q15_t *pCoeffs;           /**< points to the coefficient array. The array is of length numTaps.*/
+  } arm_fir_instance_q15;
+
+  /**
+   * @brief Instance structure for the Q31 FIR filter.
+   */
+  typedef struct
+  {
+    uint16_t numTaps;         /**< number of filter coefficients in the filter. */
+    q31_t *pState;            /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+    q31_t *pCoeffs;           /**< points to the coefficient array. The array is of length numTaps. */
+  } arm_fir_instance_q31;
+
+  /**
+   * @brief Instance structure for the floating-point FIR filter.
+   */
+  typedef struct
+  {
+    uint16_t numTaps;     /**< number of filter coefficients in the filter. */
+    float32_t *pState;    /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+    float32_t *pCoeffs;   /**< points to the coefficient array. The array is of length numTaps. */
+  } arm_fir_instance_f32;
+
+
+  /**
+   * @brief Processing function for the Q7 FIR filter.
+   * @param[in] *S points to an instance of the Q7 FIR filter structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+  void arm_fir_q7(
+  const arm_fir_instance_q7 * S,
+  q7_t * pSrc,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief  Initialization function for the Q7 FIR filter.
+   * @param[in,out] *S points to an instance of the Q7 FIR structure.
+   * @param[in] numTaps  Number of filter coefficients in the filter.
+   * @param[in] *pCoeffs points to the filter coefficients.
+   * @param[in] *pState points to the state buffer.
+   * @param[in] blockSize number of samples that are processed.
+   * @return none
+   */
+  void arm_fir_init_q7(
+  arm_fir_instance_q7 * S,
+  uint16_t numTaps,
+  q7_t * pCoeffs,
+  q7_t * pState,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief Processing function for the Q15 FIR filter.
+   * @param[in] *S points to an instance of the Q15 FIR structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+  void arm_fir_q15(
+  const arm_fir_instance_q15 * S,
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the fast Q15 FIR filter for Cortex-M3 and Cortex-M4.
+   * @param[in] *S points to an instance of the Q15 FIR filter structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+  void arm_fir_fast_q15(
+  const arm_fir_instance_q15 * S,
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Initialization function for the Q15 FIR filter.
+   * @param[in,out] *S points to an instance of the Q15 FIR filter structure.
+   * @param[in] numTaps  Number of filter coefficients in the filter. Must be even and greater than or equal to 4.
+   * @param[in] *pCoeffs points to the filter coefficients.
+   * @param[in] *pState points to the state buffer.
+   * @param[in] blockSize number of samples that are processed at a time.
+   * @return The function returns ARM_MATH_SUCCESS if initialization was successful or ARM_MATH_ARGUMENT_ERROR if
+   * <code>numTaps</code> is not a supported value.
+   */
+
+  arm_status arm_fir_init_q15(
+  arm_fir_instance_q15 * S,
+  uint16_t numTaps,
+  q15_t * pCoeffs,
+  q15_t * pState,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the Q31 FIR filter.
+   * @param[in] *S points to an instance of the Q31 FIR filter structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+  void arm_fir_q31(
+  const arm_fir_instance_q31 * S,
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the fast Q31 FIR filter for Cortex-M3 and Cortex-M4.
+   * @param[in] *S points to an instance of the Q31 FIR structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+  void arm_fir_fast_q31(
+  const arm_fir_instance_q31 * S,
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Initialization function for the Q31 FIR filter.
+   * @param[in,out] *S points to an instance of the Q31 FIR structure.
+   * @param[in] 	numTaps  Number of filter coefficients in the filter.
+   * @param[in] 	*pCoeffs points to the filter coefficients.
+   * @param[in] 	*pState points to the state buffer.
+   * @param[in] 	blockSize number of samples that are processed at a time.
+   * @return 		none.
+   */
+  void arm_fir_init_q31(
+  arm_fir_instance_q31 * S,
+  uint16_t numTaps,
+  q31_t * pCoeffs,
+  q31_t * pState,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the floating-point FIR filter.
+   * @param[in] *S points to an instance of the floating-point FIR structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+  void arm_fir_f32(
+  const arm_fir_instance_f32 * S,
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Initialization function for the floating-point FIR filter.
+   * @param[in,out] *S points to an instance of the floating-point FIR filter structure.
+   * @param[in] 	numTaps  Number of filter coefficients in the filter.
+   * @param[in] 	*pCoeffs points to the filter coefficients.
+   * @param[in] 	*pState points to the state buffer.
+   * @param[in] 	blockSize number of samples that are processed at a time.
+   * @return    	none.
+   */
+  void arm_fir_init_f32(
+  arm_fir_instance_f32 * S,
+  uint16_t numTaps,
+  float32_t * pCoeffs,
+  float32_t * pState,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief Instance structure for the Q15 Biquad cascade filter.
+   */
+  typedef struct
+  {
+    int8_t numStages;         /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
+    q15_t *pState;            /**< Points to the array of state coefficients.  The array is of length 4*numStages. */
+    q15_t *pCoeffs;           /**< Points to the array of coefficients.  The array is of length 5*numStages. */
+    int8_t postShift;         /**< Additional shift, in bits, applied to each output sample. */
+
+  } arm_biquad_casd_df1_inst_q15;
+
+
+  /**
+   * @brief Instance structure for the Q31 Biquad cascade filter.
+   */
+  typedef struct
+  {
+    uint32_t numStages;      /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
+    q31_t *pState;           /**< Points to the array of state coefficients.  The array is of length 4*numStages. */
+    q31_t *pCoeffs;          /**< Points to the array of coefficients.  The array is of length 5*numStages. */
+    uint8_t postShift;       /**< Additional shift, in bits, applied to each output sample. */
+
+  } arm_biquad_casd_df1_inst_q31;
+
+  /**
+   * @brief Instance structure for the floating-point Biquad cascade filter.
+   */
+  typedef struct
+  {
+    uint32_t numStages;         /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
+    float32_t *pState;          /**< Points to the array of state coefficients.  The array is of length 4*numStages. */
+    float32_t *pCoeffs;         /**< Points to the array of coefficients.  The array is of length 5*numStages. */
+
+
+  } arm_biquad_casd_df1_inst_f32;
+
+
+
+  /**
+   * @brief Processing function for the Q15 Biquad cascade filter.
+   * @param[in]  *S points to an instance of the Q15 Biquad cascade structure.
+   * @param[in]  *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data.
+   * @param[in]  blockSize number of samples to process.
+   * @return     none.
+   */
+
+  void arm_biquad_cascade_df1_q15(
+  const arm_biquad_casd_df1_inst_q15 * S,
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Initialization function for the Q15 Biquad cascade filter.
+   * @param[in,out] *S           points to an instance of the Q15 Biquad cascade structure.
+   * @param[in]     numStages    number of 2nd order stages in the filter.
+   * @param[in]     *pCoeffs     points to the filter coefficients.
+   * @param[in]     *pState      points to the state buffer.
+   * @param[in]     postShift    Shift to be applied to the output. Varies according to the coefficients format
+   * @return        none
+   */
+
+  void arm_biquad_cascade_df1_init_q15(
+  arm_biquad_casd_df1_inst_q15 * S,
+  uint8_t numStages,
+  q15_t * pCoeffs,
+  q15_t * pState,
+  int8_t postShift);
+
+
+  /**
+   * @brief Fast but less precise processing function for the Q15 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+   * @param[in]  *S points to an instance of the Q15 Biquad cascade structure.
+   * @param[in]  *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data.
+   * @param[in]  blockSize number of samples to process.
+   * @return     none.
+   */
+
+  void arm_biquad_cascade_df1_fast_q15(
+  const arm_biquad_casd_df1_inst_q15 * S,
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief Processing function for the Q31 Biquad cascade filter
+   * @param[in]  *S         points to an instance of the Q31 Biquad cascade structure.
+   * @param[in]  *pSrc      points to the block of input data.
+   * @param[out] *pDst      points to the block of output data.
+   * @param[in]  blockSize  number of samples to process.
+   * @return     none.
+   */
+
+  void arm_biquad_cascade_df1_q31(
+  const arm_biquad_casd_df1_inst_q31 * S,
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Fast but less precise processing function for the Q31 Biquad cascade filter for Cortex-M3 and Cortex-M4.
+   * @param[in]  *S         points to an instance of the Q31 Biquad cascade structure.
+   * @param[in]  *pSrc      points to the block of input data.
+   * @param[out] *pDst      points to the block of output data.
+   * @param[in]  blockSize  number of samples to process.
+   * @return     none.
+   */
+
+  void arm_biquad_cascade_df1_fast_q31(
+  const arm_biquad_casd_df1_inst_q31 * S,
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Initialization function for the Q31 Biquad cascade filter.
+   * @param[in,out] *S           points to an instance of the Q31 Biquad cascade structure.
+   * @param[in]     numStages      number of 2nd order stages in the filter.
+   * @param[in]     *pCoeffs     points to the filter coefficients.
+   * @param[in]     *pState      points to the state buffer.
+   * @param[in]     postShift    Shift to be applied to the output. Varies according to the coefficients format
+   * @return        none
+   */
+
+  void arm_biquad_cascade_df1_init_q31(
+  arm_biquad_casd_df1_inst_q31 * S,
+  uint8_t numStages,
+  q31_t * pCoeffs,
+  q31_t * pState,
+  int8_t postShift);
+
+  /**
+   * @brief Processing function for the floating-point Biquad cascade filter.
+   * @param[in]  *S         points to an instance of the floating-point Biquad cascade structure.
+   * @param[in]  *pSrc      points to the block of input data.
+   * @param[out] *pDst      points to the block of output data.
+   * @param[in]  blockSize  number of samples to process.
+   * @return     none.
+   */
+
+  void arm_biquad_cascade_df1_f32(
+  const arm_biquad_casd_df1_inst_f32 * S,
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Initialization function for the floating-point Biquad cascade filter.
+   * @param[in,out] *S           points to an instance of the floating-point Biquad cascade structure.
+   * @param[in]     numStages    number of 2nd order stages in the filter.
+   * @param[in]     *pCoeffs     points to the filter coefficients.
+   * @param[in]     *pState      points to the state buffer.
+   * @return        none
+   */
+
+  void arm_biquad_cascade_df1_init_f32(
+  arm_biquad_casd_df1_inst_f32 * S,
+  uint8_t numStages,
+  float32_t * pCoeffs,
+  float32_t * pState);
+
+
+  /**
+   * @brief Instance structure for the floating-point matrix structure.
+   */
+
+  typedef struct
+  {
+    uint16_t numRows;     /**< number of rows of the matrix.     */
+    uint16_t numCols;     /**< number of columns of the matrix.  */
+    float32_t *pData;     /**< points to the data of the matrix. */
+  } arm_matrix_instance_f32;
+
+
+  /**
+   * @brief Instance structure for the floating-point matrix structure.
+   */
+
+  typedef struct
+  {
+    uint16_t numRows;     /**< number of rows of the matrix.     */
+    uint16_t numCols;     /**< number of columns of the matrix.  */
+    float64_t *pData;     /**< points to the data of the matrix. */
+  } arm_matrix_instance_f64;
+
+  /**
+   * @brief Instance structure for the Q15 matrix structure.
+   */
+
+  typedef struct
+  {
+    uint16_t numRows;     /**< number of rows of the matrix.     */
+    uint16_t numCols;     /**< number of columns of the matrix.  */
+    q15_t *pData;         /**< points to the data of the matrix. */
+
+  } arm_matrix_instance_q15;
+
+  /**
+   * @brief Instance structure for the Q31 matrix structure.
+   */
+
+  typedef struct
+  {
+    uint16_t numRows;     /**< number of rows of the matrix.     */
+    uint16_t numCols;     /**< number of columns of the matrix.  */
+    q31_t *pData;         /**< points to the data of the matrix. */
+
+  } arm_matrix_instance_q31;
+
+
+
+  /**
+   * @brief Floating-point matrix addition.
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_add_f32(
+  const arm_matrix_instance_f32 * pSrcA,
+  const arm_matrix_instance_f32 * pSrcB,
+  arm_matrix_instance_f32 * pDst);
+
+  /**
+   * @brief Q15 matrix addition.
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_add_q15(
+  const arm_matrix_instance_q15 * pSrcA,
+  const arm_matrix_instance_q15 * pSrcB,
+  arm_matrix_instance_q15 * pDst);
+
+  /**
+   * @brief Q31 matrix addition.
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_add_q31(
+  const arm_matrix_instance_q31 * pSrcA,
+  const arm_matrix_instance_q31 * pSrcB,
+  arm_matrix_instance_q31 * pDst);
+
+  /**
+   * @brief Floating-point, complex, matrix multiplication.
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_cmplx_mult_f32(
+  const arm_matrix_instance_f32 * pSrcA,
+  const arm_matrix_instance_f32 * pSrcB,
+  arm_matrix_instance_f32 * pDst);
+
+  /**
+   * @brief Q15, complex,  matrix multiplication.
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_cmplx_mult_q15(
+  const arm_matrix_instance_q15 * pSrcA,
+  const arm_matrix_instance_q15 * pSrcB,
+  arm_matrix_instance_q15 * pDst,
+  q15_t * pScratch);
+
+  /**
+   * @brief Q31, complex, matrix multiplication.
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_cmplx_mult_q31(
+  const arm_matrix_instance_q31 * pSrcA,
+  const arm_matrix_instance_q31 * pSrcB,
+  arm_matrix_instance_q31 * pDst);
+
+
+  /**
+   * @brief Floating-point matrix transpose.
+   * @param[in]  *pSrc points to the input matrix
+   * @param[out] *pDst points to the output matrix
+   * @return 	The function returns either  <code>ARM_MATH_SIZE_MISMATCH</code>
+   * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_trans_f32(
+  const arm_matrix_instance_f32 * pSrc,
+  arm_matrix_instance_f32 * pDst);
+
+
+  /**
+   * @brief Q15 matrix transpose.
+   * @param[in]  *pSrc points to the input matrix
+   * @param[out] *pDst points to the output matrix
+   * @return 	The function returns either  <code>ARM_MATH_SIZE_MISMATCH</code>
+   * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_trans_q15(
+  const arm_matrix_instance_q15 * pSrc,
+  arm_matrix_instance_q15 * pDst);
+
+  /**
+   * @brief Q31 matrix transpose.
+   * @param[in]  *pSrc points to the input matrix
+   * @param[out] *pDst points to the output matrix
+   * @return 	The function returns either  <code>ARM_MATH_SIZE_MISMATCH</code>
+   * or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_trans_q31(
+  const arm_matrix_instance_q31 * pSrc,
+  arm_matrix_instance_q31 * pDst);
+
+
+  /**
+   * @brief Floating-point matrix multiplication
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_mult_f32(
+  const arm_matrix_instance_f32 * pSrcA,
+  const arm_matrix_instance_f32 * pSrcB,
+  arm_matrix_instance_f32 * pDst);
+
+  /**
+   * @brief Q15 matrix multiplication
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @param[in]		 *pState points to the array for storing intermediate results
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_mult_q15(
+  const arm_matrix_instance_q15 * pSrcA,
+  const arm_matrix_instance_q15 * pSrcB,
+  arm_matrix_instance_q15 * pDst,
+  q15_t * pState);
+
+  /**
+   * @brief Q15 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+   * @param[in]       *pSrcA  points to the first input matrix structure
+   * @param[in]       *pSrcB  points to the second input matrix structure
+   * @param[out]      *pDst   points to output matrix structure
+   * @param[in]		  *pState points to the array for storing intermediate results
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_mult_fast_q15(
+  const arm_matrix_instance_q15 * pSrcA,
+  const arm_matrix_instance_q15 * pSrcB,
+  arm_matrix_instance_q15 * pDst,
+  q15_t * pState);
+
+  /**
+   * @brief Q31 matrix multiplication
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_mult_q31(
+  const arm_matrix_instance_q31 * pSrcA,
+  const arm_matrix_instance_q31 * pSrcB,
+  arm_matrix_instance_q31 * pDst);
+
+  /**
+   * @brief Q31 matrix multiplication (fast variant) for Cortex-M3 and Cortex-M4
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_mult_fast_q31(
+  const arm_matrix_instance_q31 * pSrcA,
+  const arm_matrix_instance_q31 * pSrcB,
+  arm_matrix_instance_q31 * pDst);
+
+
+  /**
+   * @brief Floating-point matrix subtraction
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_sub_f32(
+  const arm_matrix_instance_f32 * pSrcA,
+  const arm_matrix_instance_f32 * pSrcB,
+  arm_matrix_instance_f32 * pDst);
+
+  /**
+   * @brief Q15 matrix subtraction
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_sub_q15(
+  const arm_matrix_instance_q15 * pSrcA,
+  const arm_matrix_instance_q15 * pSrcB,
+  arm_matrix_instance_q15 * pDst);
+
+  /**
+   * @brief Q31 matrix subtraction
+   * @param[in]       *pSrcA points to the first input matrix structure
+   * @param[in]       *pSrcB points to the second input matrix structure
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_sub_q31(
+  const arm_matrix_instance_q31 * pSrcA,
+  const arm_matrix_instance_q31 * pSrcB,
+  arm_matrix_instance_q31 * pDst);
+
+  /**
+   * @brief Floating-point matrix scaling.
+   * @param[in]  *pSrc points to the input matrix
+   * @param[in]  scale scale factor
+   * @param[out] *pDst points to the output matrix
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_scale_f32(
+  const arm_matrix_instance_f32 * pSrc,
+  float32_t scale,
+  arm_matrix_instance_f32 * pDst);
+
+  /**
+   * @brief Q15 matrix scaling.
+   * @param[in]       *pSrc points to input matrix
+   * @param[in]       scaleFract fractional portion of the scale factor
+   * @param[in]       shift number of bits to shift the result by
+   * @param[out]      *pDst points to output matrix
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_scale_q15(
+  const arm_matrix_instance_q15 * pSrc,
+  q15_t scaleFract,
+  int32_t shift,
+  arm_matrix_instance_q15 * pDst);
+
+  /**
+   * @brief Q31 matrix scaling.
+   * @param[in]       *pSrc points to input matrix
+   * @param[in]       scaleFract fractional portion of the scale factor
+   * @param[in]       shift number of bits to shift the result by
+   * @param[out]      *pDst points to output matrix structure
+   * @return     The function returns either
+   * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.
+   */
+
+  arm_status arm_mat_scale_q31(
+  const arm_matrix_instance_q31 * pSrc,
+  q31_t scaleFract,
+  int32_t shift,
+  arm_matrix_instance_q31 * pDst);
+
+
+  /**
+   * @brief  Q31 matrix initialization.
+   * @param[in,out] *S             points to an instance of the floating-point matrix structure.
+   * @param[in]     nRows          number of rows in the matrix.
+   * @param[in]     nColumns       number of columns in the matrix.
+   * @param[in]     *pData	       points to the matrix data array.
+   * @return        none
+   */
+
+  void arm_mat_init_q31(
+  arm_matrix_instance_q31 * S,
+  uint16_t nRows,
+  uint16_t nColumns,
+  q31_t * pData);
+
+  /**
+   * @brief  Q15 matrix initialization.
+   * @param[in,out] *S             points to an instance of the floating-point matrix structure.
+   * @param[in]     nRows          number of rows in the matrix.
+   * @param[in]     nColumns       number of columns in the matrix.
+   * @param[in]     *pData	       points to the matrix data array.
+   * @return        none
+   */
+
+  void arm_mat_init_q15(
+  arm_matrix_instance_q15 * S,
+  uint16_t nRows,
+  uint16_t nColumns,
+  q15_t * pData);
+
+  /**
+   * @brief  Floating-point matrix initialization.
+   * @param[in,out] *S             points to an instance of the floating-point matrix structure.
+   * @param[in]     nRows          number of rows in the matrix.
+   * @param[in]     nColumns       number of columns in the matrix.
+   * @param[in]     *pData	       points to the matrix data array.
+   * @return        none
+   */
+
+  void arm_mat_init_f32(
+  arm_matrix_instance_f32 * S,
+  uint16_t nRows,
+  uint16_t nColumns,
+  float32_t * pData);
+
+
+
+  /**
+   * @brief Instance structure for the Q15 PID Control.
+   */
+  typedef struct
+  {
+    q15_t A0;    /**< The derived gain, A0 = Kp + Ki + Kd . */
+#ifdef ARM_MATH_CM0_FAMILY
+    q15_t A1;
+    q15_t A2;
+#else
+    q31_t A1;           /**< The derived gain A1 = -Kp - 2Kd | Kd.*/
+#endif
+    q15_t state[3];       /**< The state array of length 3. */
+    q15_t Kp;           /**< The proportional gain. */
+    q15_t Ki;           /**< The integral gain. */
+    q15_t Kd;           /**< The derivative gain. */
+  } arm_pid_instance_q15;
+
+  /**
+   * @brief Instance structure for the Q31 PID Control.
+   */
+  typedef struct
+  {
+    q31_t A0;            /**< The derived gain, A0 = Kp + Ki + Kd . */
+    q31_t A1;            /**< The derived gain, A1 = -Kp - 2Kd. */
+    q31_t A2;            /**< The derived gain, A2 = Kd . */
+    q31_t state[3];      /**< The state array of length 3. */
+    q31_t Kp;            /**< The proportional gain. */
+    q31_t Ki;            /**< The integral gain. */
+    q31_t Kd;            /**< The derivative gain. */
+
+  } arm_pid_instance_q31;
+
+  /**
+   * @brief Instance structure for the floating-point PID Control.
+   */
+  typedef struct
+  {
+    float32_t A0;          /**< The derived gain, A0 = Kp + Ki + Kd . */
+    float32_t A1;          /**< The derived gain, A1 = -Kp - 2Kd. */
+    float32_t A2;          /**< The derived gain, A2 = Kd . */
+    float32_t state[3];    /**< The state array of length 3. */
+    float32_t Kp;               /**< The proportional gain. */
+    float32_t Ki;               /**< The integral gain. */
+    float32_t Kd;               /**< The derivative gain. */
+  } arm_pid_instance_f32;
+
+
+
+  /**
+   * @brief  Initialization function for the floating-point PID Control.
+   * @param[in,out] *S      points to an instance of the PID structure.
+   * @param[in]     resetStateFlag  flag to reset the state. 0 = no change in state 1 = reset the state.
+   * @return none.
+   */
+  void arm_pid_init_f32(
+  arm_pid_instance_f32 * S,
+  int32_t resetStateFlag);
+
+  /**
+   * @brief  Reset function for the floating-point PID Control.
+   * @param[in,out] *S is an instance of the floating-point PID Control structure
+   * @return none
+   */
+  void arm_pid_reset_f32(
+  arm_pid_instance_f32 * S);
+
+
+  /**
+   * @brief  Initialization function for the Q31 PID Control.
+   * @param[in,out] *S points to an instance of the Q15 PID structure.
+   * @param[in]     resetStateFlag  flag to reset the state. 0 = no change in state 1 = reset the state.
+   * @return none.
+   */
+  void arm_pid_init_q31(
+  arm_pid_instance_q31 * S,
+  int32_t resetStateFlag);
+
+
+  /**
+   * @brief  Reset function for the Q31 PID Control.
+   * @param[in,out] *S points to an instance of the Q31 PID Control structure
+   * @return none
+   */
+
+  void arm_pid_reset_q31(
+  arm_pid_instance_q31 * S);
+
+  /**
+   * @brief  Initialization function for the Q15 PID Control.
+   * @param[in,out] *S points to an instance of the Q15 PID structure.
+   * @param[in] resetStateFlag  flag to reset the state. 0 = no change in state 1 = reset the state.
+   * @return none.
+   */
+  void arm_pid_init_q15(
+  arm_pid_instance_q15 * S,
+  int32_t resetStateFlag);
+
+  /**
+   * @brief  Reset function for the Q15 PID Control.
+   * @param[in,out] *S points to an instance of the q15 PID Control structure
+   * @return none
+   */
+  void arm_pid_reset_q15(
+  arm_pid_instance_q15 * S);
+
+
+  /**
+   * @brief Instance structure for the floating-point Linear Interpolate function.
+   */
+  typedef struct
+  {
+    uint32_t nValues;           /**< nValues */
+    float32_t x1;               /**< x1 */
+    float32_t xSpacing;         /**< xSpacing */
+    float32_t *pYData;          /**< pointer to the table of Y values */
+  } arm_linear_interp_instance_f32;
+
+  /**
+   * @brief Instance structure for the floating-point bilinear interpolation function.
+   */
+
+  typedef struct
+  {
+    uint16_t numRows;   /**< number of rows in the data table. */
+    uint16_t numCols;   /**< number of columns in the data table. */
+    float32_t *pData;   /**< points to the data table. */
+  } arm_bilinear_interp_instance_f32;
+
+   /**
+   * @brief Instance structure for the Q31 bilinear interpolation function.
+   */
+
+  typedef struct
+  {
+    uint16_t numRows;   /**< number of rows in the data table. */
+    uint16_t numCols;   /**< number of columns in the data table. */
+    q31_t *pData;       /**< points to the data table. */
+  } arm_bilinear_interp_instance_q31;
+
+   /**
+   * @brief Instance structure for the Q15 bilinear interpolation function.
+   */
+
+  typedef struct
+  {
+    uint16_t numRows;   /**< number of rows in the data table. */
+    uint16_t numCols;   /**< number of columns in the data table. */
+    q15_t *pData;       /**< points to the data table. */
+  } arm_bilinear_interp_instance_q15;
+
+   /**
+   * @brief Instance structure for the Q15 bilinear interpolation function.
+   */
+
+  typedef struct
+  {
+    uint16_t numRows;   /**< number of rows in the data table. */
+    uint16_t numCols;   /**< number of columns in the data table. */
+    q7_t *pData;                /**< points to the data table. */
+  } arm_bilinear_interp_instance_q7;
+
+
+  /**
+   * @brief Q7 vector multiplication.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[out]      *pDst  points to the output vector
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_mult_q7(
+  q7_t * pSrcA,
+  q7_t * pSrcB,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Q15 vector multiplication.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[out]      *pDst  points to the output vector
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_mult_q15(
+  q15_t * pSrcA,
+  q15_t * pSrcB,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Q31 vector multiplication.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_mult_q31(
+  q31_t * pSrcA,
+  q31_t * pSrcB,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Floating-point vector multiplication.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_mult_f32(
+  float32_t * pSrcA,
+  float32_t * pSrcB,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+
+
+
+
+
+  /**
+   * @brief Instance structure for the Q15 CFFT/CIFFT function.
+   */
+
+  typedef struct
+  {
+    uint16_t fftLen;                 /**< length of the FFT. */
+    uint8_t ifftFlag;                /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+    uint8_t bitReverseFlag;          /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+    q15_t *pTwiddle;                     /**< points to the Sin twiddle factor table. */
+    uint16_t *pBitRevTable;          /**< points to the bit reversal table. */
+    uint16_t twidCoefModifier;       /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+    uint16_t bitRevFactor;           /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+  } arm_cfft_radix2_instance_q15;
+
+/* Deprecated */
+  arm_status arm_cfft_radix2_init_q15(
+  arm_cfft_radix2_instance_q15 * S,
+  uint16_t fftLen,
+  uint8_t ifftFlag,
+  uint8_t bitReverseFlag);
+
+/* Deprecated */
+  void arm_cfft_radix2_q15(
+  const arm_cfft_radix2_instance_q15 * S,
+  q15_t * pSrc);
+
+
+
+  /**
+   * @brief Instance structure for the Q15 CFFT/CIFFT function.
+   */
+
+  typedef struct
+  {
+    uint16_t fftLen;                 /**< length of the FFT. */
+    uint8_t ifftFlag;                /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+    uint8_t bitReverseFlag;          /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+    q15_t *pTwiddle;                 /**< points to the twiddle factor table. */
+    uint16_t *pBitRevTable;          /**< points to the bit reversal table. */
+    uint16_t twidCoefModifier;       /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+    uint16_t bitRevFactor;           /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+  } arm_cfft_radix4_instance_q15;
+
+/* Deprecated */
+  arm_status arm_cfft_radix4_init_q15(
+  arm_cfft_radix4_instance_q15 * S,
+  uint16_t fftLen,
+  uint8_t ifftFlag,
+  uint8_t bitReverseFlag);
+
+/* Deprecated */
+  void arm_cfft_radix4_q15(
+  const arm_cfft_radix4_instance_q15 * S,
+  q15_t * pSrc);
+
+  /**
+   * @brief Instance structure for the Radix-2 Q31 CFFT/CIFFT function.
+   */
+
+  typedef struct
+  {
+    uint16_t fftLen;                 /**< length of the FFT. */
+    uint8_t ifftFlag;                /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+    uint8_t bitReverseFlag;          /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+    q31_t *pTwiddle;                     /**< points to the Twiddle factor table. */
+    uint16_t *pBitRevTable;          /**< points to the bit reversal table. */
+    uint16_t twidCoefModifier;       /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+    uint16_t bitRevFactor;           /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+  } arm_cfft_radix2_instance_q31;
+
+/* Deprecated */
+  arm_status arm_cfft_radix2_init_q31(
+  arm_cfft_radix2_instance_q31 * S,
+  uint16_t fftLen,
+  uint8_t ifftFlag,
+  uint8_t bitReverseFlag);
+
+/* Deprecated */
+  void arm_cfft_radix2_q31(
+  const arm_cfft_radix2_instance_q31 * S,
+  q31_t * pSrc);
+
+  /**
+   * @brief Instance structure for the Q31 CFFT/CIFFT function.
+   */
+
+  typedef struct
+  {
+    uint16_t fftLen;                 /**< length of the FFT. */
+    uint8_t ifftFlag;                /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+    uint8_t bitReverseFlag;          /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+    q31_t *pTwiddle;                 /**< points to the twiddle factor table. */
+    uint16_t *pBitRevTable;          /**< points to the bit reversal table. */
+    uint16_t twidCoefModifier;       /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+    uint16_t bitRevFactor;           /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+  } arm_cfft_radix4_instance_q31;
+
+/* Deprecated */
+  void arm_cfft_radix4_q31(
+  const arm_cfft_radix4_instance_q31 * S,
+  q31_t * pSrc);
+
+/* Deprecated */
+  arm_status arm_cfft_radix4_init_q31(
+  arm_cfft_radix4_instance_q31 * S,
+  uint16_t fftLen,
+  uint8_t ifftFlag,
+  uint8_t bitReverseFlag);
+
+  /**
+   * @brief Instance structure for the floating-point CFFT/CIFFT function.
+   */
+
+  typedef struct
+  {
+    uint16_t fftLen;                   /**< length of the FFT. */
+    uint8_t ifftFlag;                  /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+    uint8_t bitReverseFlag;            /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+    float32_t *pTwiddle;               /**< points to the Twiddle factor table. */
+    uint16_t *pBitRevTable;            /**< points to the bit reversal table. */
+    uint16_t twidCoefModifier;         /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+    uint16_t bitRevFactor;             /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+    float32_t onebyfftLen;                 /**< value of 1/fftLen. */
+  } arm_cfft_radix2_instance_f32;
+
+/* Deprecated */
+  arm_status arm_cfft_radix2_init_f32(
+  arm_cfft_radix2_instance_f32 * S,
+  uint16_t fftLen,
+  uint8_t ifftFlag,
+  uint8_t bitReverseFlag);
+
+/* Deprecated */
+  void arm_cfft_radix2_f32(
+  const arm_cfft_radix2_instance_f32 * S,
+  float32_t * pSrc);
+
+  /**
+   * @brief Instance structure for the floating-point CFFT/CIFFT function.
+   */
+
+  typedef struct
+  {
+    uint16_t fftLen;                   /**< length of the FFT. */
+    uint8_t ifftFlag;                  /**< flag that selects forward (ifftFlag=0) or inverse (ifftFlag=1) transform. */
+    uint8_t bitReverseFlag;            /**< flag that enables (bitReverseFlag=1) or disables (bitReverseFlag=0) bit reversal of output. */
+    float32_t *pTwiddle;               /**< points to the Twiddle factor table. */
+    uint16_t *pBitRevTable;            /**< points to the bit reversal table. */
+    uint16_t twidCoefModifier;         /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+    uint16_t bitRevFactor;             /**< bit reversal modifier that supports different size FFTs with the same bit reversal table. */
+    float32_t onebyfftLen;                 /**< value of 1/fftLen. */
+  } arm_cfft_radix4_instance_f32;
+
+/* Deprecated */
+  arm_status arm_cfft_radix4_init_f32(
+  arm_cfft_radix4_instance_f32 * S,
+  uint16_t fftLen,
+  uint8_t ifftFlag,
+  uint8_t bitReverseFlag);
+
+/* Deprecated */
+  void arm_cfft_radix4_f32(
+  const arm_cfft_radix4_instance_f32 * S,
+  float32_t * pSrc);
+
+  /**
+   * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+   */
+
+  typedef struct
+  {
+    uint16_t fftLen;                   /**< length of the FFT. */
+    const q15_t *pTwiddle;             /**< points to the Twiddle factor table. */
+    const uint16_t *pBitRevTable;      /**< points to the bit reversal table. */
+    uint16_t bitRevLength;             /**< bit reversal table length. */
+  } arm_cfft_instance_q15;
+
+void arm_cfft_q15( 
+    const arm_cfft_instance_q15 * S, 
+    q15_t * p1,
+    uint8_t ifftFlag,
+    uint8_t bitReverseFlag);  
+
+  /**
+   * @brief Instance structure for the fixed-point CFFT/CIFFT function.
+   */
+
+  typedef struct
+  {
+    uint16_t fftLen;                   /**< length of the FFT. */
+    const q31_t *pTwiddle;             /**< points to the Twiddle factor table. */
+    const uint16_t *pBitRevTable;      /**< points to the bit reversal table. */
+    uint16_t bitRevLength;             /**< bit reversal table length. */
+  } arm_cfft_instance_q31;
+
+void arm_cfft_q31( 
+    const arm_cfft_instance_q31 * S, 
+    q31_t * p1,
+    uint8_t ifftFlag,
+    uint8_t bitReverseFlag);  
+  
+  /**
+   * @brief Instance structure for the floating-point CFFT/CIFFT function.
+   */
+
+  typedef struct
+  {
+    uint16_t fftLen;                   /**< length of the FFT. */
+    const float32_t *pTwiddle;         /**< points to the Twiddle factor table. */
+    const uint16_t *pBitRevTable;      /**< points to the bit reversal table. */
+    uint16_t bitRevLength;             /**< bit reversal table length. */
+  } arm_cfft_instance_f32;
+
+  void arm_cfft_f32(
+  const arm_cfft_instance_f32 * S,
+  float32_t * p1,
+  uint8_t ifftFlag,
+  uint8_t bitReverseFlag);
+
+  /**
+   * @brief Instance structure for the Q15 RFFT/RIFFT function.
+   */
+
+  typedef struct
+  {
+    uint32_t fftLenReal;                      /**< length of the real FFT. */
+    uint8_t ifftFlagR;                        /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+    uint8_t bitReverseFlagR;                  /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+    uint32_t twidCoefRModifier;               /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+    q15_t *pTwiddleAReal;                     /**< points to the real twiddle factor table. */
+    q15_t *pTwiddleBReal;                     /**< points to the imag twiddle factor table. */
+    const arm_cfft_instance_q15 *pCfft;       /**< points to the complex FFT instance. */
+  } arm_rfft_instance_q15;
+
+  arm_status arm_rfft_init_q15(
+  arm_rfft_instance_q15 * S,
+  uint32_t fftLenReal,
+  uint32_t ifftFlagR,
+  uint32_t bitReverseFlag);
+
+  void arm_rfft_q15(
+  const arm_rfft_instance_q15 * S,
+  q15_t * pSrc,
+  q15_t * pDst);
+
+  /**
+   * @brief Instance structure for the Q31 RFFT/RIFFT function.
+   */
+
+  typedef struct
+  {
+    uint32_t fftLenReal;                        /**< length of the real FFT. */
+    uint8_t ifftFlagR;                          /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+    uint8_t bitReverseFlagR;                    /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+    uint32_t twidCoefRModifier;                 /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+    q31_t *pTwiddleAReal;                       /**< points to the real twiddle factor table. */
+    q31_t *pTwiddleBReal;                       /**< points to the imag twiddle factor table. */
+    const arm_cfft_instance_q31 *pCfft;         /**< points to the complex FFT instance. */
+  } arm_rfft_instance_q31;
+
+  arm_status arm_rfft_init_q31(
+  arm_rfft_instance_q31 * S,
+  uint32_t fftLenReal,
+  uint32_t ifftFlagR,
+  uint32_t bitReverseFlag);
+
+  void arm_rfft_q31(
+  const arm_rfft_instance_q31 * S,
+  q31_t * pSrc,
+  q31_t * pDst);
+
+  /**
+   * @brief Instance structure for the floating-point RFFT/RIFFT function.
+   */
+
+  typedef struct
+  {
+    uint32_t fftLenReal;                        /**< length of the real FFT. */
+    uint16_t fftLenBy2;                         /**< length of the complex FFT. */
+    uint8_t ifftFlagR;                          /**< flag that selects forward (ifftFlagR=0) or inverse (ifftFlagR=1) transform. */
+    uint8_t bitReverseFlagR;                    /**< flag that enables (bitReverseFlagR=1) or disables (bitReverseFlagR=0) bit reversal of output. */
+    uint32_t twidCoefRModifier;                     /**< twiddle coefficient modifier that supports different size FFTs with the same twiddle factor table. */
+    float32_t *pTwiddleAReal;                   /**< points to the real twiddle factor table. */
+    float32_t *pTwiddleBReal;                   /**< points to the imag twiddle factor table. */
+    arm_cfft_radix4_instance_f32 *pCfft;        /**< points to the complex FFT instance. */
+  } arm_rfft_instance_f32;
+
+  arm_status arm_rfft_init_f32(
+  arm_rfft_instance_f32 * S,
+  arm_cfft_radix4_instance_f32 * S_CFFT,
+  uint32_t fftLenReal,
+  uint32_t ifftFlagR,
+  uint32_t bitReverseFlag);
+
+  void arm_rfft_f32(
+  const arm_rfft_instance_f32 * S,
+  float32_t * pSrc,
+  float32_t * pDst);
+
+  /**
+   * @brief Instance structure for the floating-point RFFT/RIFFT function.
+   */
+
+typedef struct
+  {
+    arm_cfft_instance_f32 Sint;      /**< Internal CFFT structure. */
+    uint16_t fftLenRFFT;                        /**< length of the real sequence */
+	float32_t * pTwiddleRFFT;					/**< Twiddle factors real stage  */
+  } arm_rfft_fast_instance_f32 ;
+
+arm_status arm_rfft_fast_init_f32 (
+	arm_rfft_fast_instance_f32 * S,
+	uint16_t fftLen);
+
+void arm_rfft_fast_f32(
+  arm_rfft_fast_instance_f32 * S,
+  float32_t * p, float32_t * pOut,
+  uint8_t ifftFlag);
+
+  /**
+   * @brief Instance structure for the floating-point DCT4/IDCT4 function.
+   */
+
+  typedef struct
+  {
+    uint16_t N;                         /**< length of the DCT4. */
+    uint16_t Nby2;                      /**< half of the length of the DCT4. */
+    float32_t normalize;                /**< normalizing factor. */
+    float32_t *pTwiddle;                /**< points to the twiddle factor table. */
+    float32_t *pCosFactor;              /**< points to the cosFactor table. */
+    arm_rfft_instance_f32 *pRfft;        /**< points to the real FFT instance. */
+    arm_cfft_radix4_instance_f32 *pCfft; /**< points to the complex FFT instance. */
+  } arm_dct4_instance_f32;
+
+  /**
+   * @brief  Initialization function for the floating-point DCT4/IDCT4.
+   * @param[in,out] *S         points to an instance of floating-point DCT4/IDCT4 structure.
+   * @param[in]     *S_RFFT    points to an instance of floating-point RFFT/RIFFT structure.
+   * @param[in]     *S_CFFT    points to an instance of floating-point CFFT/CIFFT structure.
+   * @param[in]     N          length of the DCT4.
+   * @param[in]     Nby2       half of the length of the DCT4.
+   * @param[in]     normalize  normalizing factor.
+   * @return		arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>fftLenReal</code> is not a supported transform length.
+   */
+
+  arm_status arm_dct4_init_f32(
+  arm_dct4_instance_f32 * S,
+  arm_rfft_instance_f32 * S_RFFT,
+  arm_cfft_radix4_instance_f32 * S_CFFT,
+  uint16_t N,
+  uint16_t Nby2,
+  float32_t normalize);
+
+  /**
+   * @brief Processing function for the floating-point DCT4/IDCT4.
+   * @param[in]       *S             points to an instance of the floating-point DCT4/IDCT4 structure.
+   * @param[in]       *pState        points to state buffer.
+   * @param[in,out]   *pInlineBuffer points to the in-place input and output buffer.
+   * @return none.
+   */
+
+  void arm_dct4_f32(
+  const arm_dct4_instance_f32 * S,
+  float32_t * pState,
+  float32_t * pInlineBuffer);
+
+  /**
+   * @brief Instance structure for the Q31 DCT4/IDCT4 function.
+   */
+
+  typedef struct
+  {
+    uint16_t N;                         /**< length of the DCT4. */
+    uint16_t Nby2;                      /**< half of the length of the DCT4. */
+    q31_t normalize;                    /**< normalizing factor. */
+    q31_t *pTwiddle;                    /**< points to the twiddle factor table. */
+    q31_t *pCosFactor;                  /**< points to the cosFactor table. */
+    arm_rfft_instance_q31 *pRfft;        /**< points to the real FFT instance. */
+    arm_cfft_radix4_instance_q31 *pCfft; /**< points to the complex FFT instance. */
+  } arm_dct4_instance_q31;
+
+  /**
+   * @brief  Initialization function for the Q31 DCT4/IDCT4.
+   * @param[in,out] *S         points to an instance of Q31 DCT4/IDCT4 structure.
+   * @param[in]     *S_RFFT    points to an instance of Q31 RFFT/RIFFT structure
+   * @param[in]     *S_CFFT    points to an instance of Q31 CFFT/CIFFT structure
+   * @param[in]     N          length of the DCT4.
+   * @param[in]     Nby2       half of the length of the DCT4.
+   * @param[in]     normalize  normalizing factor.
+   * @return		arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length.
+   */
+
+  arm_status arm_dct4_init_q31(
+  arm_dct4_instance_q31 * S,
+  arm_rfft_instance_q31 * S_RFFT,
+  arm_cfft_radix4_instance_q31 * S_CFFT,
+  uint16_t N,
+  uint16_t Nby2,
+  q31_t normalize);
+
+  /**
+   * @brief Processing function for the Q31 DCT4/IDCT4.
+   * @param[in]       *S             points to an instance of the Q31 DCT4 structure.
+   * @param[in]       *pState        points to state buffer.
+   * @param[in,out]   *pInlineBuffer points to the in-place input and output buffer.
+   * @return none.
+   */
+
+  void arm_dct4_q31(
+  const arm_dct4_instance_q31 * S,
+  q31_t * pState,
+  q31_t * pInlineBuffer);
+
+  /**
+   * @brief Instance structure for the Q15 DCT4/IDCT4 function.
+   */
+
+  typedef struct
+  {
+    uint16_t N;                         /**< length of the DCT4. */
+    uint16_t Nby2;                      /**< half of the length of the DCT4. */
+    q15_t normalize;                    /**< normalizing factor. */
+    q15_t *pTwiddle;                    /**< points to the twiddle factor table. */
+    q15_t *pCosFactor;                  /**< points to the cosFactor table. */
+    arm_rfft_instance_q15 *pRfft;        /**< points to the real FFT instance. */
+    arm_cfft_radix4_instance_q15 *pCfft; /**< points to the complex FFT instance. */
+  } arm_dct4_instance_q15;
+
+  /**
+   * @brief  Initialization function for the Q15 DCT4/IDCT4.
+   * @param[in,out] *S         points to an instance of Q15 DCT4/IDCT4 structure.
+   * @param[in]     *S_RFFT    points to an instance of Q15 RFFT/RIFFT structure.
+   * @param[in]     *S_CFFT    points to an instance of Q15 CFFT/CIFFT structure.
+   * @param[in]     N          length of the DCT4.
+   * @param[in]     Nby2       half of the length of the DCT4.
+   * @param[in]     normalize  normalizing factor.
+   * @return		arm_status function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_ARGUMENT_ERROR if <code>N</code> is not a supported transform length.
+   */
+
+  arm_status arm_dct4_init_q15(
+  arm_dct4_instance_q15 * S,
+  arm_rfft_instance_q15 * S_RFFT,
+  arm_cfft_radix4_instance_q15 * S_CFFT,
+  uint16_t N,
+  uint16_t Nby2,
+  q15_t normalize);
+
+  /**
+   * @brief Processing function for the Q15 DCT4/IDCT4.
+   * @param[in]       *S             points to an instance of the Q15 DCT4 structure.
+   * @param[in]       *pState        points to state buffer.
+   * @param[in,out]   *pInlineBuffer points to the in-place input and output buffer.
+   * @return none.
+   */
+
+  void arm_dct4_q15(
+  const arm_dct4_instance_q15 * S,
+  q15_t * pState,
+  q15_t * pInlineBuffer);
+
+  /**
+   * @brief Floating-point vector addition.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_add_f32(
+  float32_t * pSrcA,
+  float32_t * pSrcB,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Q7 vector addition.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_add_q7(
+  q7_t * pSrcA,
+  q7_t * pSrcB,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Q15 vector addition.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_add_q15(
+  q15_t * pSrcA,
+  q15_t * pSrcB,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Q31 vector addition.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_add_q31(
+  q31_t * pSrcA,
+  q31_t * pSrcB,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Floating-point vector subtraction.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_sub_f32(
+  float32_t * pSrcA,
+  float32_t * pSrcB,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Q7 vector subtraction.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_sub_q7(
+  q7_t * pSrcA,
+  q7_t * pSrcB,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Q15 vector subtraction.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_sub_q15(
+  q15_t * pSrcA,
+  q15_t * pSrcB,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Q31 vector subtraction.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_sub_q31(
+  q31_t * pSrcA,
+  q31_t * pSrcB,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Multiplies a floating-point vector by a scalar.
+   * @param[in]       *pSrc points to the input vector
+   * @param[in]       scale scale factor to be applied
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_scale_f32(
+  float32_t * pSrc,
+  float32_t scale,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Multiplies a Q7 vector by a scalar.
+   * @param[in]       *pSrc points to the input vector
+   * @param[in]       scaleFract fractional portion of the scale value
+   * @param[in]       shift number of bits to shift the result by
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_scale_q7(
+  q7_t * pSrc,
+  q7_t scaleFract,
+  int8_t shift,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Multiplies a Q15 vector by a scalar.
+   * @param[in]       *pSrc points to the input vector
+   * @param[in]       scaleFract fractional portion of the scale value
+   * @param[in]       shift number of bits to shift the result by
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_scale_q15(
+  q15_t * pSrc,
+  q15_t scaleFract,
+  int8_t shift,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Multiplies a Q31 vector by a scalar.
+   * @param[in]       *pSrc points to the input vector
+   * @param[in]       scaleFract fractional portion of the scale value
+   * @param[in]       shift number of bits to shift the result by
+   * @param[out]      *pDst points to the output vector
+   * @param[in]       blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_scale_q31(
+  q31_t * pSrc,
+  q31_t scaleFract,
+  int8_t shift,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Q7 vector absolute value.
+   * @param[in]       *pSrc points to the input buffer
+   * @param[out]      *pDst points to the output buffer
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_abs_q7(
+  q7_t * pSrc,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Floating-point vector absolute value.
+   * @param[in]       *pSrc points to the input buffer
+   * @param[out]      *pDst points to the output buffer
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_abs_f32(
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Q15 vector absolute value.
+   * @param[in]       *pSrc points to the input buffer
+   * @param[out]      *pDst points to the output buffer
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_abs_q15(
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Q31 vector absolute value.
+   * @param[in]       *pSrc points to the input buffer
+   * @param[out]      *pDst points to the output buffer
+   * @param[in]       blockSize number of samples in each vector
+   * @return none.
+   */
+
+  void arm_abs_q31(
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Dot product of floating-point vectors.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[in]       blockSize number of samples in each vector
+   * @param[out]      *result output result returned here
+   * @return none.
+   */
+
+  void arm_dot_prod_f32(
+  float32_t * pSrcA,
+  float32_t * pSrcB,
+  uint32_t blockSize,
+  float32_t * result);
+
+  /**
+   * @brief Dot product of Q7 vectors.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[in]       blockSize number of samples in each vector
+   * @param[out]      *result output result returned here
+   * @return none.
+   */
+
+  void arm_dot_prod_q7(
+  q7_t * pSrcA,
+  q7_t * pSrcB,
+  uint32_t blockSize,
+  q31_t * result);
+
+  /**
+   * @brief Dot product of Q15 vectors.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[in]       blockSize number of samples in each vector
+   * @param[out]      *result output result returned here
+   * @return none.
+   */
+
+  void arm_dot_prod_q15(
+  q15_t * pSrcA,
+  q15_t * pSrcB,
+  uint32_t blockSize,
+  q63_t * result);
+
+  /**
+   * @brief Dot product of Q31 vectors.
+   * @param[in]       *pSrcA points to the first input vector
+   * @param[in]       *pSrcB points to the second input vector
+   * @param[in]       blockSize number of samples in each vector
+   * @param[out]      *result output result returned here
+   * @return none.
+   */
+
+  void arm_dot_prod_q31(
+  q31_t * pSrcA,
+  q31_t * pSrcB,
+  uint32_t blockSize,
+  q63_t * result);
+
+  /**
+   * @brief  Shifts the elements of a Q7 vector a specified number of bits.
+   * @param[in]  *pSrc points to the input vector
+   * @param[in]  shiftBits number of bits to shift.  A positive value shifts left; a negative value shifts right.
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_shift_q7(
+  q7_t * pSrc,
+  int8_t shiftBits,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Shifts the elements of a Q15 vector a specified number of bits.
+   * @param[in]  *pSrc points to the input vector
+   * @param[in]  shiftBits number of bits to shift.  A positive value shifts left; a negative value shifts right.
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_shift_q15(
+  q15_t * pSrc,
+  int8_t shiftBits,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Shifts the elements of a Q31 vector a specified number of bits.
+   * @param[in]  *pSrc points to the input vector
+   * @param[in]  shiftBits number of bits to shift.  A positive value shifts left; a negative value shifts right.
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_shift_q31(
+  q31_t * pSrc,
+  int8_t shiftBits,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Adds a constant offset to a floating-point vector.
+   * @param[in]  *pSrc points to the input vector
+   * @param[in]  offset is the offset to be added
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_offset_f32(
+  float32_t * pSrc,
+  float32_t offset,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Adds a constant offset to a Q7 vector.
+   * @param[in]  *pSrc points to the input vector
+   * @param[in]  offset is the offset to be added
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_offset_q7(
+  q7_t * pSrc,
+  q7_t offset,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Adds a constant offset to a Q15 vector.
+   * @param[in]  *pSrc points to the input vector
+   * @param[in]  offset is the offset to be added
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_offset_q15(
+  q15_t * pSrc,
+  q15_t offset,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Adds a constant offset to a Q31 vector.
+   * @param[in]  *pSrc points to the input vector
+   * @param[in]  offset is the offset to be added
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_offset_q31(
+  q31_t * pSrc,
+  q31_t offset,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Negates the elements of a floating-point vector.
+   * @param[in]  *pSrc points to the input vector
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_negate_f32(
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Negates the elements of a Q7 vector.
+   * @param[in]  *pSrc points to the input vector
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_negate_q7(
+  q7_t * pSrc,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Negates the elements of a Q15 vector.
+   * @param[in]  *pSrc points to the input vector
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_negate_q15(
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Negates the elements of a Q31 vector.
+   * @param[in]  *pSrc points to the input vector
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  blockSize number of samples in the vector
+   * @return none.
+   */
+
+  void arm_negate_q31(
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+  /**
+   * @brief  Copies the elements of a floating-point vector.
+   * @param[in]  *pSrc input pointer
+   * @param[out]  *pDst output pointer
+   * @param[in]  blockSize number of samples to process
+   * @return none.
+   */
+  void arm_copy_f32(
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Copies the elements of a Q7 vector.
+   * @param[in]  *pSrc input pointer
+   * @param[out]  *pDst output pointer
+   * @param[in]  blockSize number of samples to process
+   * @return none.
+   */
+  void arm_copy_q7(
+  q7_t * pSrc,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Copies the elements of a Q15 vector.
+   * @param[in]  *pSrc input pointer
+   * @param[out]  *pDst output pointer
+   * @param[in]  blockSize number of samples to process
+   * @return none.
+   */
+  void arm_copy_q15(
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Copies the elements of a Q31 vector.
+   * @param[in]  *pSrc input pointer
+   * @param[out]  *pDst output pointer
+   * @param[in]  blockSize number of samples to process
+   * @return none.
+   */
+  void arm_copy_q31(
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+  /**
+   * @brief  Fills a constant value into a floating-point vector.
+   * @param[in]  value input value to be filled
+   * @param[out]  *pDst output pointer
+   * @param[in]  blockSize number of samples to process
+   * @return none.
+   */
+  void arm_fill_f32(
+  float32_t value,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Fills a constant value into a Q7 vector.
+   * @param[in]  value input value to be filled
+   * @param[out]  *pDst output pointer
+   * @param[in]  blockSize number of samples to process
+   * @return none.
+   */
+  void arm_fill_q7(
+  q7_t value,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Fills a constant value into a Q15 vector.
+   * @param[in]  value input value to be filled
+   * @param[out]  *pDst output pointer
+   * @param[in]  blockSize number of samples to process
+   * @return none.
+   */
+  void arm_fill_q15(
+  q15_t value,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Fills a constant value into a Q31 vector.
+   * @param[in]  value input value to be filled
+   * @param[out]  *pDst output pointer
+   * @param[in]  blockSize number of samples to process
+   * @return none.
+   */
+  void arm_fill_q31(
+  q31_t value,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+/**
+ * @brief Convolution of floating-point sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the location where the output result is written.  Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+  void arm_conv_f32(
+  float32_t * pSrcA,
+  uint32_t srcALen,
+  float32_t * pSrcB,
+  uint32_t srcBLen,
+  float32_t * pDst);
+
+
+  /**
+   * @brief Convolution of Q15 sequences.
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length srcALen+srcBLen-1.
+   * @param[in]  *pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+   * @param[in]  *pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+   * @return none.
+   */
+
+
+  void arm_conv_opt_q15(
+  q15_t * pSrcA,
+  uint32_t srcALen,
+  q15_t * pSrcB,
+  uint32_t srcBLen,
+  q15_t * pDst,
+  q15_t * pScratch1,
+  q15_t * pScratch2);
+
+
+/**
+ * @brief Convolution of Q15 sequences.
+ * @param[in] *pSrcA points to the first input sequence.
+ * @param[in] srcALen length of the first input sequence.
+ * @param[in] *pSrcB points to the second input sequence.
+ * @param[in] srcBLen length of the second input sequence.
+ * @param[out] *pDst points to the location where the output result is written.  Length srcALen+srcBLen-1.
+ * @return none.
+ */
+
+  void arm_conv_q15(
+  q15_t * pSrcA,
+  uint32_t srcALen,
+  q15_t * pSrcB,
+  uint32_t srcBLen,
+  q15_t * pDst);
+
+  /**
+   * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length srcALen+srcBLen-1.
+   * @return none.
+   */
+
+  void arm_conv_fast_q15(
+			  q15_t * pSrcA,
+			 uint32_t srcALen,
+			  q15_t * pSrcB,
+			 uint32_t srcBLen,
+			 q15_t * pDst);
+
+  /**
+   * @brief Convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length srcALen+srcBLen-1.
+   * @param[in]  *pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+   * @param[in]  *pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+   * @return none.
+   */
+
+  void arm_conv_fast_opt_q15(
+  q15_t * pSrcA,
+  uint32_t srcALen,
+  q15_t * pSrcB,
+  uint32_t srcBLen,
+  q15_t * pDst,
+  q15_t * pScratch1,
+  q15_t * pScratch2);
+
+
+
+  /**
+   * @brief Convolution of Q31 sequences.
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length srcALen+srcBLen-1.
+   * @return none.
+   */
+
+  void arm_conv_q31(
+  q31_t * pSrcA,
+  uint32_t srcALen,
+  q31_t * pSrcB,
+  uint32_t srcBLen,
+  q31_t * pDst);
+
+  /**
+   * @brief Convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length srcALen+srcBLen-1.
+   * @return none.
+   */
+
+  void arm_conv_fast_q31(
+  q31_t * pSrcA,
+  uint32_t srcALen,
+  q31_t * pSrcB,
+  uint32_t srcBLen,
+  q31_t * pDst);
+
+
+    /**
+   * @brief Convolution of Q7 sequences.
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length srcALen+srcBLen-1.
+   * @param[in]  *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+   * @param[in]  *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+   * @return none.
+   */
+
+  void arm_conv_opt_q7(
+  q7_t * pSrcA,
+  uint32_t srcALen,
+  q7_t * pSrcB,
+  uint32_t srcBLen,
+  q7_t * pDst,
+  q15_t * pScratch1,
+  q15_t * pScratch2);
+
+
+
+  /**
+   * @brief Convolution of Q7 sequences.
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length srcALen+srcBLen-1.
+   * @return none.
+   */
+
+  void arm_conv_q7(
+  q7_t * pSrcA,
+  uint32_t srcALen,
+  q7_t * pSrcB,
+  uint32_t srcBLen,
+  q7_t * pDst);
+
+
+  /**
+   * @brief Partial convolution of floating-point sequences.
+   * @param[in]       *pSrcA points to the first input sequence.
+   * @param[in]       srcALen length of the first input sequence.
+   * @param[in]       *pSrcB points to the second input sequence.
+   * @param[in]       srcBLen length of the second input sequence.
+   * @param[out]      *pDst points to the block of output data
+   * @param[in]       firstIndex is the first output sample to start with.
+   * @param[in]       numPoints is the number of output points to be computed.
+   * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+   */
+
+  arm_status arm_conv_partial_f32(
+  float32_t * pSrcA,
+  uint32_t srcALen,
+  float32_t * pSrcB,
+  uint32_t srcBLen,
+  float32_t * pDst,
+  uint32_t firstIndex,
+  uint32_t numPoints);
+
+    /**
+   * @brief Partial convolution of Q15 sequences.
+   * @param[in]       *pSrcA points to the first input sequence.
+   * @param[in]       srcALen length of the first input sequence.
+   * @param[in]       *pSrcB points to the second input sequence.
+   * @param[in]       srcBLen length of the second input sequence.
+   * @param[out]      *pDst points to the block of output data
+   * @param[in]       firstIndex is the first output sample to start with.
+   * @param[in]       numPoints is the number of output points to be computed.
+   * @param[in]       * pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+   * @param[in]       * pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+   * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+   */
+
+  arm_status arm_conv_partial_opt_q15(
+  q15_t * pSrcA,
+  uint32_t srcALen,
+  q15_t * pSrcB,
+  uint32_t srcBLen,
+  q15_t * pDst,
+  uint32_t firstIndex,
+  uint32_t numPoints,
+  q15_t * pScratch1,
+  q15_t * pScratch2);
+
+
+/**
+   * @brief Partial convolution of Q15 sequences.
+   * @param[in]       *pSrcA points to the first input sequence.
+   * @param[in]       srcALen length of the first input sequence.
+   * @param[in]       *pSrcB points to the second input sequence.
+   * @param[in]       srcBLen length of the second input sequence.
+   * @param[out]      *pDst points to the block of output data
+   * @param[in]       firstIndex is the first output sample to start with.
+   * @param[in]       numPoints is the number of output points to be computed.
+   * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+   */
+
+  arm_status arm_conv_partial_q15(
+  q15_t * pSrcA,
+  uint32_t srcALen,
+  q15_t * pSrcB,
+  uint32_t srcBLen,
+  q15_t * pDst,
+  uint32_t firstIndex,
+  uint32_t numPoints);
+
+  /**
+   * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+   * @param[in]       *pSrcA points to the first input sequence.
+   * @param[in]       srcALen length of the first input sequence.
+   * @param[in]       *pSrcB points to the second input sequence.
+   * @param[in]       srcBLen length of the second input sequence.
+   * @param[out]      *pDst points to the block of output data
+   * @param[in]       firstIndex is the first output sample to start with.
+   * @param[in]       numPoints is the number of output points to be computed.
+   * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+   */
+
+  arm_status arm_conv_partial_fast_q15(
+				        q15_t * pSrcA,
+				       uint32_t srcALen,
+				        q15_t * pSrcB,
+				       uint32_t srcBLen,
+				       q15_t * pDst,
+				       uint32_t firstIndex,
+				       uint32_t numPoints);
+
+
+  /**
+   * @brief Partial convolution of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4
+   * @param[in]       *pSrcA points to the first input sequence.
+   * @param[in]       srcALen length of the first input sequence.
+   * @param[in]       *pSrcB points to the second input sequence.
+   * @param[in]       srcBLen length of the second input sequence.
+   * @param[out]      *pDst points to the block of output data
+   * @param[in]       firstIndex is the first output sample to start with.
+   * @param[in]       numPoints is the number of output points to be computed.
+   * @param[in]       * pScratch1 points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+   * @param[in]       * pScratch2 points to scratch buffer of size min(srcALen, srcBLen).
+   * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+   */
+
+  arm_status arm_conv_partial_fast_opt_q15(
+  q15_t * pSrcA,
+  uint32_t srcALen,
+  q15_t * pSrcB,
+  uint32_t srcBLen,
+  q15_t * pDst,
+  uint32_t firstIndex,
+  uint32_t numPoints,
+  q15_t * pScratch1,
+  q15_t * pScratch2);
+
+
+  /**
+   * @brief Partial convolution of Q31 sequences.
+   * @param[in]       *pSrcA points to the first input sequence.
+   * @param[in]       srcALen length of the first input sequence.
+   * @param[in]       *pSrcB points to the second input sequence.
+   * @param[in]       srcBLen length of the second input sequence.
+   * @param[out]      *pDst points to the block of output data
+   * @param[in]       firstIndex is the first output sample to start with.
+   * @param[in]       numPoints is the number of output points to be computed.
+   * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+   */
+
+  arm_status arm_conv_partial_q31(
+  q31_t * pSrcA,
+  uint32_t srcALen,
+  q31_t * pSrcB,
+  uint32_t srcBLen,
+  q31_t * pDst,
+  uint32_t firstIndex,
+  uint32_t numPoints);
+
+
+  /**
+   * @brief Partial convolution of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+   * @param[in]       *pSrcA points to the first input sequence.
+   * @param[in]       srcALen length of the first input sequence.
+   * @param[in]       *pSrcB points to the second input sequence.
+   * @param[in]       srcBLen length of the second input sequence.
+   * @param[out]      *pDst points to the block of output data
+   * @param[in]       firstIndex is the first output sample to start with.
+   * @param[in]       numPoints is the number of output points to be computed.
+   * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+   */
+
+  arm_status arm_conv_partial_fast_q31(
+  q31_t * pSrcA,
+  uint32_t srcALen,
+  q31_t * pSrcB,
+  uint32_t srcBLen,
+  q31_t * pDst,
+  uint32_t firstIndex,
+  uint32_t numPoints);
+
+
+  /**
+   * @brief Partial convolution of Q7 sequences
+   * @param[in]       *pSrcA points to the first input sequence.
+   * @param[in]       srcALen length of the first input sequence.
+   * @param[in]       *pSrcB points to the second input sequence.
+   * @param[in]       srcBLen length of the second input sequence.
+   * @param[out]      *pDst points to the block of output data
+   * @param[in]       firstIndex is the first output sample to start with.
+   * @param[in]       numPoints is the number of output points to be computed.
+   * @param[in]  *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+   * @param[in]  *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+   * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+   */
+
+  arm_status arm_conv_partial_opt_q7(
+  q7_t * pSrcA,
+  uint32_t srcALen,
+  q7_t * pSrcB,
+  uint32_t srcBLen,
+  q7_t * pDst,
+  uint32_t firstIndex,
+  uint32_t numPoints,
+  q15_t * pScratch1,
+  q15_t * pScratch2);
+
+
+/**
+   * @brief Partial convolution of Q7 sequences.
+   * @param[in]       *pSrcA points to the first input sequence.
+   * @param[in]       srcALen length of the first input sequence.
+   * @param[in]       *pSrcB points to the second input sequence.
+   * @param[in]       srcBLen length of the second input sequence.
+   * @param[out]      *pDst points to the block of output data
+   * @param[in]       firstIndex is the first output sample to start with.
+   * @param[in]       numPoints is the number of output points to be computed.
+   * @return  Returns either ARM_MATH_SUCCESS if the function completed correctly or ARM_MATH_ARGUMENT_ERROR if the requested subset is not in the range [0 srcALen+srcBLen-2].
+   */
+
+  arm_status arm_conv_partial_q7(
+  q7_t * pSrcA,
+  uint32_t srcALen,
+  q7_t * pSrcB,
+  uint32_t srcBLen,
+  q7_t * pDst,
+  uint32_t firstIndex,
+  uint32_t numPoints);
+
+
+
+  /**
+   * @brief Instance structure for the Q15 FIR decimator.
+   */
+
+  typedef struct
+  {
+    uint8_t M;                      /**< decimation factor. */
+    uint16_t numTaps;               /**< number of coefficients in the filter. */
+    q15_t *pCoeffs;                  /**< points to the coefficient array. The array is of length numTaps.*/
+    q15_t *pState;                   /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+  } arm_fir_decimate_instance_q15;
+
+  /**
+   * @brief Instance structure for the Q31 FIR decimator.
+   */
+
+  typedef struct
+  {
+    uint8_t M;                  /**< decimation factor. */
+    uint16_t numTaps;           /**< number of coefficients in the filter. */
+    q31_t *pCoeffs;              /**< points to the coefficient array. The array is of length numTaps.*/
+    q31_t *pState;               /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+
+  } arm_fir_decimate_instance_q31;
+
+  /**
+   * @brief Instance structure for the floating-point FIR decimator.
+   */
+
+  typedef struct
+  {
+    uint8_t M;                          /**< decimation factor. */
+    uint16_t numTaps;                   /**< number of coefficients in the filter. */
+    float32_t *pCoeffs;                  /**< points to the coefficient array. The array is of length numTaps.*/
+    float32_t *pState;                   /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+
+  } arm_fir_decimate_instance_f32;
+
+
+
+  /**
+   * @brief Processing function for the floating-point FIR decimator.
+   * @param[in] *S points to an instance of the floating-point FIR decimator structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data
+   * @param[in] blockSize number of input samples to process per call.
+   * @return none
+   */
+
+  void arm_fir_decimate_f32(
+  const arm_fir_decimate_instance_f32 * S,
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief  Initialization function for the floating-point FIR decimator.
+   * @param[in,out] *S points to an instance of the floating-point FIR decimator structure.
+   * @param[in] numTaps  number of coefficients in the filter.
+   * @param[in] M  decimation factor.
+   * @param[in] *pCoeffs points to the filter coefficients.
+   * @param[in] *pState points to the state buffer.
+   * @param[in] blockSize number of input samples to process per call.
+   * @return    The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+   * <code>blockSize</code> is not a multiple of <code>M</code>.
+   */
+
+  arm_status arm_fir_decimate_init_f32(
+  arm_fir_decimate_instance_f32 * S,
+  uint16_t numTaps,
+  uint8_t M,
+  float32_t * pCoeffs,
+  float32_t * pState,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the Q15 FIR decimator.
+   * @param[in] *S points to an instance of the Q15 FIR decimator structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data
+   * @param[in] blockSize number of input samples to process per call.
+   * @return none
+   */
+
+  void arm_fir_decimate_q15(
+  const arm_fir_decimate_instance_q15 * S,
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the Q15 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+   * @param[in] *S points to an instance of the Q15 FIR decimator structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data
+   * @param[in] blockSize number of input samples to process per call.
+   * @return none
+   */
+
+  void arm_fir_decimate_fast_q15(
+  const arm_fir_decimate_instance_q15 * S,
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+
+
+  /**
+   * @brief  Initialization function for the Q15 FIR decimator.
+   * @param[in,out] *S points to an instance of the Q15 FIR decimator structure.
+   * @param[in] numTaps  number of coefficients in the filter.
+   * @param[in] M  decimation factor.
+   * @param[in] *pCoeffs points to the filter coefficients.
+   * @param[in] *pState points to the state buffer.
+   * @param[in] blockSize number of input samples to process per call.
+   * @return    The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+   * <code>blockSize</code> is not a multiple of <code>M</code>.
+   */
+
+  arm_status arm_fir_decimate_init_q15(
+  arm_fir_decimate_instance_q15 * S,
+  uint16_t numTaps,
+  uint8_t M,
+  q15_t * pCoeffs,
+  q15_t * pState,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the Q31 FIR decimator.
+   * @param[in] *S points to an instance of the Q31 FIR decimator structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data
+   * @param[in] blockSize number of input samples to process per call.
+   * @return none
+   */
+
+  void arm_fir_decimate_q31(
+  const arm_fir_decimate_instance_q31 * S,
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the Q31 FIR decimator (fast variant) for Cortex-M3 and Cortex-M4.
+   * @param[in] *S points to an instance of the Q31 FIR decimator structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data
+   * @param[in] blockSize number of input samples to process per call.
+   * @return none
+   */
+
+  void arm_fir_decimate_fast_q31(
+  arm_fir_decimate_instance_q31 * S,
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief  Initialization function for the Q31 FIR decimator.
+   * @param[in,out] *S points to an instance of the Q31 FIR decimator structure.
+   * @param[in] numTaps  number of coefficients in the filter.
+   * @param[in] M  decimation factor.
+   * @param[in] *pCoeffs points to the filter coefficients.
+   * @param[in] *pState points to the state buffer.
+   * @param[in] blockSize number of input samples to process per call.
+   * @return    The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+   * <code>blockSize</code> is not a multiple of <code>M</code>.
+   */
+
+  arm_status arm_fir_decimate_init_q31(
+  arm_fir_decimate_instance_q31 * S,
+  uint16_t numTaps,
+  uint8_t M,
+  q31_t * pCoeffs,
+  q31_t * pState,
+  uint32_t blockSize);
+
+
+
+  /**
+   * @brief Instance structure for the Q15 FIR interpolator.
+   */
+
+  typedef struct
+  {
+    uint8_t L;                      /**< upsample factor. */
+    uint16_t phaseLength;           /**< length of each polyphase filter component. */
+    q15_t *pCoeffs;                 /**< points to the coefficient array. The array is of length L*phaseLength. */
+    q15_t *pState;                  /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+  } arm_fir_interpolate_instance_q15;
+
+  /**
+   * @brief Instance structure for the Q31 FIR interpolator.
+   */
+
+  typedef struct
+  {
+    uint8_t L;                      /**< upsample factor. */
+    uint16_t phaseLength;           /**< length of each polyphase filter component. */
+    q31_t *pCoeffs;                  /**< points to the coefficient array. The array is of length L*phaseLength. */
+    q31_t *pState;                   /**< points to the state variable array. The array is of length blockSize+phaseLength-1. */
+  } arm_fir_interpolate_instance_q31;
+
+  /**
+   * @brief Instance structure for the floating-point FIR interpolator.
+   */
+
+  typedef struct
+  {
+    uint8_t L;                     /**< upsample factor. */
+    uint16_t phaseLength;          /**< length of each polyphase filter component. */
+    float32_t *pCoeffs;             /**< points to the coefficient array. The array is of length L*phaseLength. */
+    float32_t *pState;              /**< points to the state variable array. The array is of length phaseLength+numTaps-1. */
+  } arm_fir_interpolate_instance_f32;
+
+
+  /**
+   * @brief Processing function for the Q15 FIR interpolator.
+   * @param[in] *S        points to an instance of the Q15 FIR interpolator structure.
+   * @param[in] *pSrc     points to the block of input data.
+   * @param[out] *pDst    points to the block of output data.
+   * @param[in] blockSize number of input samples to process per call.
+   * @return none.
+   */
+
+  void arm_fir_interpolate_q15(
+  const arm_fir_interpolate_instance_q15 * S,
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief  Initialization function for the Q15 FIR interpolator.
+   * @param[in,out] *S        points to an instance of the Q15 FIR interpolator structure.
+   * @param[in]     L         upsample factor.
+   * @param[in]     numTaps   number of filter coefficients in the filter.
+   * @param[in]     *pCoeffs  points to the filter coefficient buffer.
+   * @param[in]     *pState   points to the state buffer.
+   * @param[in]     blockSize number of input samples to process per call.
+   * @return        The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+   * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
+   */
+
+  arm_status arm_fir_interpolate_init_q15(
+  arm_fir_interpolate_instance_q15 * S,
+  uint8_t L,
+  uint16_t numTaps,
+  q15_t * pCoeffs,
+  q15_t * pState,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the Q31 FIR interpolator.
+   * @param[in] *S        points to an instance of the Q15 FIR interpolator structure.
+   * @param[in] *pSrc     points to the block of input data.
+   * @param[out] *pDst    points to the block of output data.
+   * @param[in] blockSize number of input samples to process per call.
+   * @return none.
+   */
+
+  void arm_fir_interpolate_q31(
+  const arm_fir_interpolate_instance_q31 * S,
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Initialization function for the Q31 FIR interpolator.
+   * @param[in,out] *S        points to an instance of the Q31 FIR interpolator structure.
+   * @param[in]     L         upsample factor.
+   * @param[in]     numTaps   number of filter coefficients in the filter.
+   * @param[in]     *pCoeffs  points to the filter coefficient buffer.
+   * @param[in]     *pState   points to the state buffer.
+   * @param[in]     blockSize number of input samples to process per call.
+   * @return        The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+   * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
+   */
+
+  arm_status arm_fir_interpolate_init_q31(
+  arm_fir_interpolate_instance_q31 * S,
+  uint8_t L,
+  uint16_t numTaps,
+  q31_t * pCoeffs,
+  q31_t * pState,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief Processing function for the floating-point FIR interpolator.
+   * @param[in] *S        points to an instance of the floating-point FIR interpolator structure.
+   * @param[in] *pSrc     points to the block of input data.
+   * @param[out] *pDst    points to the block of output data.
+   * @param[in] blockSize number of input samples to process per call.
+   * @return none.
+   */
+
+  void arm_fir_interpolate_f32(
+  const arm_fir_interpolate_instance_f32 * S,
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Initialization function for the floating-point FIR interpolator.
+   * @param[in,out] *S        points to an instance of the floating-point FIR interpolator structure.
+   * @param[in]     L         upsample factor.
+   * @param[in]     numTaps   number of filter coefficients in the filter.
+   * @param[in]     *pCoeffs  points to the filter coefficient buffer.
+   * @param[in]     *pState   points to the state buffer.
+   * @param[in]     blockSize number of input samples to process per call.
+   * @return        The function returns ARM_MATH_SUCCESS if initialization is successful or ARM_MATH_LENGTH_ERROR if
+   * the filter length <code>numTaps</code> is not a multiple of the interpolation factor <code>L</code>.
+   */
+
+  arm_status arm_fir_interpolate_init_f32(
+  arm_fir_interpolate_instance_f32 * S,
+  uint8_t L,
+  uint16_t numTaps,
+  float32_t * pCoeffs,
+  float32_t * pState,
+  uint32_t blockSize);
+
+  /**
+   * @brief Instance structure for the high precision Q31 Biquad cascade filter.
+   */
+
+  typedef struct
+  {
+    uint8_t numStages;       /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
+    q63_t *pState;           /**< points to the array of state coefficients.  The array is of length 4*numStages. */
+    q31_t *pCoeffs;          /**< points to the array of coefficients.  The array is of length 5*numStages. */
+    uint8_t postShift;       /**< additional shift, in bits, applied to each output sample. */
+
+  } arm_biquad_cas_df1_32x64_ins_q31;
+
+
+  /**
+   * @param[in]  *S        points to an instance of the high precision Q31 Biquad cascade filter structure.
+   * @param[in]  *pSrc     points to the block of input data.
+   * @param[out] *pDst     points to the block of output data
+   * @param[in]  blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_biquad_cas_df1_32x64_q31(
+  const arm_biquad_cas_df1_32x64_ins_q31 * S,
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @param[in,out] *S           points to an instance of the high precision Q31 Biquad cascade filter structure.
+   * @param[in]     numStages    number of 2nd order stages in the filter.
+   * @param[in]     *pCoeffs     points to the filter coefficients.
+   * @param[in]     *pState      points to the state buffer.
+   * @param[in]     postShift    shift to be applied to the output. Varies according to the coefficients format
+   * @return        none
+   */
+
+  void arm_biquad_cas_df1_32x64_init_q31(
+  arm_biquad_cas_df1_32x64_ins_q31 * S,
+  uint8_t numStages,
+  q31_t * pCoeffs,
+  q63_t * pState,
+  uint8_t postShift);
+
+
+
+  /**
+   * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+   */
+
+  typedef struct
+  {
+    uint8_t numStages;         /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
+    float32_t *pState;         /**< points to the array of state coefficients.  The array is of length 2*numStages. */
+    float32_t *pCoeffs;        /**< points to the array of coefficients.  The array is of length 5*numStages. */
+  } arm_biquad_cascade_df2T_instance_f32;
+
+
+
+  /**
+   * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+   */
+
+  typedef struct
+  {
+    uint8_t numStages;         /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
+    float32_t *pState;         /**< points to the array of state coefficients.  The array is of length 4*numStages. */
+    float32_t *pCoeffs;        /**< points to the array of coefficients.  The array is of length 5*numStages. */
+  } arm_biquad_cascade_stereo_df2T_instance_f32;
+
+
+
+  /**
+   * @brief Instance structure for the floating-point transposed direct form II Biquad cascade filter.
+   */
+
+  typedef struct
+  {
+    uint8_t numStages;         /**< number of 2nd order stages in the filter.  Overall order is 2*numStages. */
+    float64_t *pState;         /**< points to the array of state coefficients.  The array is of length 2*numStages. */
+    float64_t *pCoeffs;        /**< points to the array of coefficients.  The array is of length 5*numStages. */
+  } arm_biquad_cascade_df2T_instance_f64;
+
+
+  /**
+   * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+   * @param[in]  *S        points to an instance of the filter data structure.
+   * @param[in]  *pSrc     points to the block of input data.
+   * @param[out] *pDst     points to the block of output data
+   * @param[in]  blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_biquad_cascade_df2T_f32(
+  const arm_biquad_cascade_df2T_instance_f32 * S,
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter. 2 channels
+   * @param[in]  *S        points to an instance of the filter data structure.
+   * @param[in]  *pSrc     points to the block of input data.
+   * @param[out] *pDst     points to the block of output data
+   * @param[in]  blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_biquad_cascade_stereo_df2T_f32(
+  const arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the floating-point transposed direct form II Biquad cascade filter.
+   * @param[in]  *S        points to an instance of the filter data structure.
+   * @param[in]  *pSrc     points to the block of input data.
+   * @param[out] *pDst     points to the block of output data
+   * @param[in]  blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_biquad_cascade_df2T_f64(
+  const arm_biquad_cascade_df2T_instance_f64 * S,
+  float64_t * pSrc,
+  float64_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief  Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+   * @param[in,out] *S           points to an instance of the filter data structure.
+   * @param[in]     numStages    number of 2nd order stages in the filter.
+   * @param[in]     *pCoeffs     points to the filter coefficients.
+   * @param[in]     *pState      points to the state buffer.
+   * @return        none
+   */
+
+  void arm_biquad_cascade_df2T_init_f32(
+  arm_biquad_cascade_df2T_instance_f32 * S,
+  uint8_t numStages,
+  float32_t * pCoeffs,
+  float32_t * pState);
+
+
+  /**
+   * @brief  Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+   * @param[in,out] *S           points to an instance of the filter data structure.
+   * @param[in]     numStages    number of 2nd order stages in the filter.
+   * @param[in]     *pCoeffs     points to the filter coefficients.
+   * @param[in]     *pState      points to the state buffer.
+   * @return        none
+   */
+
+  void arm_biquad_cascade_stereo_df2T_init_f32(
+  arm_biquad_cascade_stereo_df2T_instance_f32 * S,
+  uint8_t numStages,
+  float32_t * pCoeffs,
+  float32_t * pState);
+
+
+  /**
+   * @brief  Initialization function for the floating-point transposed direct form II Biquad cascade filter.
+   * @param[in,out] *S           points to an instance of the filter data structure.
+   * @param[in]     numStages    number of 2nd order stages in the filter.
+   * @param[in]     *pCoeffs     points to the filter coefficients.
+   * @param[in]     *pState      points to the state buffer.
+   * @return        none
+   */
+
+  void arm_biquad_cascade_df2T_init_f64(
+  arm_biquad_cascade_df2T_instance_f64 * S,
+  uint8_t numStages,
+  float64_t * pCoeffs,
+  float64_t * pState);
+
+
+
+  /**
+   * @brief Instance structure for the Q15 FIR lattice filter.
+   */
+
+  typedef struct
+  {
+    uint16_t numStages;                          /**< number of filter stages. */
+    q15_t *pState;                               /**< points to the state variable array. The array is of length numStages. */
+    q15_t *pCoeffs;                              /**< points to the coefficient array. The array is of length numStages. */
+  } arm_fir_lattice_instance_q15;
+
+  /**
+   * @brief Instance structure for the Q31 FIR lattice filter.
+   */
+
+  typedef struct
+  {
+    uint16_t numStages;                          /**< number of filter stages. */
+    q31_t *pState;                               /**< points to the state variable array. The array is of length numStages. */
+    q31_t *pCoeffs;                              /**< points to the coefficient array. The array is of length numStages. */
+  } arm_fir_lattice_instance_q31;
+
+  /**
+   * @brief Instance structure for the floating-point FIR lattice filter.
+   */
+
+  typedef struct
+  {
+    uint16_t numStages;                  /**< number of filter stages. */
+    float32_t *pState;                   /**< points to the state variable array. The array is of length numStages. */
+    float32_t *pCoeffs;                  /**< points to the coefficient array. The array is of length numStages. */
+  } arm_fir_lattice_instance_f32;
+
+  /**
+   * @brief Initialization function for the Q15 FIR lattice filter.
+   * @param[in] *S points to an instance of the Q15 FIR lattice structure.
+   * @param[in] numStages  number of filter stages.
+   * @param[in] *pCoeffs points to the coefficient buffer.  The array is of length numStages.
+   * @param[in] *pState points to the state buffer.  The array is of length numStages.
+   * @return none.
+   */
+
+  void arm_fir_lattice_init_q15(
+  arm_fir_lattice_instance_q15 * S,
+  uint16_t numStages,
+  q15_t * pCoeffs,
+  q15_t * pState);
+
+
+  /**
+   * @brief Processing function for the Q15 FIR lattice filter.
+   * @param[in] *S points to an instance of the Q15 FIR lattice structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+  void arm_fir_lattice_q15(
+  const arm_fir_lattice_instance_q15 * S,
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Initialization function for the Q31 FIR lattice filter.
+   * @param[in] *S points to an instance of the Q31 FIR lattice structure.
+   * @param[in] numStages  number of filter stages.
+   * @param[in] *pCoeffs points to the coefficient buffer.  The array is of length numStages.
+   * @param[in] *pState points to the state buffer.   The array is of length numStages.
+   * @return none.
+   */
+
+  void arm_fir_lattice_init_q31(
+  arm_fir_lattice_instance_q31 * S,
+  uint16_t numStages,
+  q31_t * pCoeffs,
+  q31_t * pState);
+
+
+  /**
+   * @brief Processing function for the Q31 FIR lattice filter.
+   * @param[in]  *S        points to an instance of the Q31 FIR lattice structure.
+   * @param[in]  *pSrc     points to the block of input data.
+   * @param[out] *pDst     points to the block of output data
+   * @param[in]  blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_fir_lattice_q31(
+  const arm_fir_lattice_instance_q31 * S,
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+/**
+ * @brief Initialization function for the floating-point FIR lattice filter.
+ * @param[in] *S points to an instance of the floating-point FIR lattice structure.
+ * @param[in] numStages  number of filter stages.
+ * @param[in] *pCoeffs points to the coefficient buffer.  The array is of length numStages.
+ * @param[in] *pState points to the state buffer.  The array is of length numStages.
+ * @return none.
+ */
+
+  void arm_fir_lattice_init_f32(
+  arm_fir_lattice_instance_f32 * S,
+  uint16_t numStages,
+  float32_t * pCoeffs,
+  float32_t * pState);
+
+  /**
+   * @brief Processing function for the floating-point FIR lattice filter.
+   * @param[in]  *S        points to an instance of the floating-point FIR lattice structure.
+   * @param[in]  *pSrc     points to the block of input data.
+   * @param[out] *pDst     points to the block of output data
+   * @param[in]  blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_fir_lattice_f32(
+  const arm_fir_lattice_instance_f32 * S,
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Instance structure for the Q15 IIR lattice filter.
+   */
+  typedef struct
+  {
+    uint16_t numStages;                         /**< number of stages in the filter. */
+    q15_t *pState;                              /**< points to the state variable array. The array is of length numStages+blockSize. */
+    q15_t *pkCoeffs;                            /**< points to the reflection coefficient array. The array is of length numStages. */
+    q15_t *pvCoeffs;                            /**< points to the ladder coefficient array. The array is of length numStages+1. */
+  } arm_iir_lattice_instance_q15;
+
+  /**
+   * @brief Instance structure for the Q31 IIR lattice filter.
+   */
+  typedef struct
+  {
+    uint16_t numStages;                         /**< number of stages in the filter. */
+    q31_t *pState;                              /**< points to the state variable array. The array is of length numStages+blockSize. */
+    q31_t *pkCoeffs;                            /**< points to the reflection coefficient array. The array is of length numStages. */
+    q31_t *pvCoeffs;                            /**< points to the ladder coefficient array. The array is of length numStages+1. */
+  } arm_iir_lattice_instance_q31;
+
+  /**
+   * @brief Instance structure for the floating-point IIR lattice filter.
+   */
+  typedef struct
+  {
+    uint16_t numStages;                         /**< number of stages in the filter. */
+    float32_t *pState;                          /**< points to the state variable array. The array is of length numStages+blockSize. */
+    float32_t *pkCoeffs;                        /**< points to the reflection coefficient array. The array is of length numStages. */
+    float32_t *pvCoeffs;                        /**< points to the ladder coefficient array. The array is of length numStages+1. */
+  } arm_iir_lattice_instance_f32;
+
+  /**
+   * @brief Processing function for the floating-point IIR lattice filter.
+   * @param[in] *S points to an instance of the floating-point IIR lattice structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_iir_lattice_f32(
+  const arm_iir_lattice_instance_f32 * S,
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Initialization function for the floating-point IIR lattice filter.
+   * @param[in] *S points to an instance of the floating-point IIR lattice structure.
+   * @param[in] numStages number of stages in the filter.
+   * @param[in] *pkCoeffs points to the reflection coefficient buffer.  The array is of length numStages.
+   * @param[in] *pvCoeffs points to the ladder coefficient buffer.  The array is of length numStages+1.
+   * @param[in] *pState points to the state buffer.  The array is of length numStages+blockSize-1.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_iir_lattice_init_f32(
+  arm_iir_lattice_instance_f32 * S,
+  uint16_t numStages,
+  float32_t * pkCoeffs,
+  float32_t * pvCoeffs,
+  float32_t * pState,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief Processing function for the Q31 IIR lattice filter.
+   * @param[in] *S points to an instance of the Q31 IIR lattice structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_iir_lattice_q31(
+  const arm_iir_lattice_instance_q31 * S,
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief Initialization function for the Q31 IIR lattice filter.
+   * @param[in] *S points to an instance of the Q31 IIR lattice structure.
+   * @param[in] numStages number of stages in the filter.
+   * @param[in] *pkCoeffs points to the reflection coefficient buffer.  The array is of length numStages.
+   * @param[in] *pvCoeffs points to the ladder coefficient buffer.  The array is of length numStages+1.
+   * @param[in] *pState points to the state buffer.  The array is of length numStages+blockSize.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_iir_lattice_init_q31(
+  arm_iir_lattice_instance_q31 * S,
+  uint16_t numStages,
+  q31_t * pkCoeffs,
+  q31_t * pvCoeffs,
+  q31_t * pState,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief Processing function for the Q15 IIR lattice filter.
+   * @param[in] *S points to an instance of the Q15 IIR lattice structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[out] *pDst points to the block of output data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_iir_lattice_q15(
+  const arm_iir_lattice_instance_q15 * S,
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+
+/**
+ * @brief Initialization function for the Q15 IIR lattice filter.
+ * @param[in] *S points to an instance of the fixed-point Q15 IIR lattice structure.
+ * @param[in] numStages  number of stages in the filter.
+ * @param[in] *pkCoeffs points to reflection coefficient buffer.  The array is of length numStages.
+ * @param[in] *pvCoeffs points to ladder coefficient buffer.  The array is of length numStages+1.
+ * @param[in] *pState points to state buffer.  The array is of length numStages+blockSize.
+ * @param[in] blockSize number of samples to process per call.
+ * @return none.
+ */
+
+  void arm_iir_lattice_init_q15(
+  arm_iir_lattice_instance_q15 * S,
+  uint16_t numStages,
+  q15_t * pkCoeffs,
+  q15_t * pvCoeffs,
+  q15_t * pState,
+  uint32_t blockSize);
+
+  /**
+   * @brief Instance structure for the floating-point LMS filter.
+   */
+
+  typedef struct
+  {
+    uint16_t numTaps;    /**< number of coefficients in the filter. */
+    float32_t *pState;   /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+    float32_t *pCoeffs;  /**< points to the coefficient array. The array is of length numTaps. */
+    float32_t mu;        /**< step size that controls filter coefficient updates. */
+  } arm_lms_instance_f32;
+
+  /**
+   * @brief Processing function for floating-point LMS filter.
+   * @param[in]  *S points to an instance of the floating-point LMS filter structure.
+   * @param[in]  *pSrc points to the block of input data.
+   * @param[in]  *pRef points to the block of reference data.
+   * @param[out] *pOut points to the block of output data.
+   * @param[out] *pErr points to the block of error data.
+   * @param[in]  blockSize number of samples to process.
+   * @return     none.
+   */
+
+  void arm_lms_f32(
+  const arm_lms_instance_f32 * S,
+  float32_t * pSrc,
+  float32_t * pRef,
+  float32_t * pOut,
+  float32_t * pErr,
+  uint32_t blockSize);
+
+  /**
+   * @brief Initialization function for floating-point LMS filter.
+   * @param[in] *S points to an instance of the floating-point LMS filter structure.
+   * @param[in] numTaps  number of filter coefficients.
+   * @param[in] *pCoeffs points to the coefficient buffer.
+   * @param[in] *pState points to state buffer.
+   * @param[in] mu step size that controls filter coefficient updates.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_lms_init_f32(
+  arm_lms_instance_f32 * S,
+  uint16_t numTaps,
+  float32_t * pCoeffs,
+  float32_t * pState,
+  float32_t mu,
+  uint32_t blockSize);
+
+  /**
+   * @brief Instance structure for the Q15 LMS filter.
+   */
+
+  typedef struct
+  {
+    uint16_t numTaps;    /**< number of coefficients in the filter. */
+    q15_t *pState;       /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+    q15_t *pCoeffs;      /**< points to the coefficient array. The array is of length numTaps. */
+    q15_t mu;            /**< step size that controls filter coefficient updates. */
+    uint32_t postShift;  /**< bit shift applied to coefficients. */
+  } arm_lms_instance_q15;
+
+
+  /**
+   * @brief Initialization function for the Q15 LMS filter.
+   * @param[in] *S points to an instance of the Q15 LMS filter structure.
+   * @param[in] numTaps  number of filter coefficients.
+   * @param[in] *pCoeffs points to the coefficient buffer.
+   * @param[in] *pState points to the state buffer.
+   * @param[in] mu step size that controls filter coefficient updates.
+   * @param[in] blockSize number of samples to process.
+   * @param[in] postShift bit shift applied to coefficients.
+   * @return    none.
+   */
+
+  void arm_lms_init_q15(
+  arm_lms_instance_q15 * S,
+  uint16_t numTaps,
+  q15_t * pCoeffs,
+  q15_t * pState,
+  q15_t mu,
+  uint32_t blockSize,
+  uint32_t postShift);
+
+  /**
+   * @brief Processing function for Q15 LMS filter.
+   * @param[in] *S points to an instance of the Q15 LMS filter structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[in] *pRef points to the block of reference data.
+   * @param[out] *pOut points to the block of output data.
+   * @param[out] *pErr points to the block of error data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_lms_q15(
+  const arm_lms_instance_q15 * S,
+  q15_t * pSrc,
+  q15_t * pRef,
+  q15_t * pOut,
+  q15_t * pErr,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief Instance structure for the Q31 LMS filter.
+   */
+
+  typedef struct
+  {
+    uint16_t numTaps;    /**< number of coefficients in the filter. */
+    q31_t *pState;       /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+    q31_t *pCoeffs;      /**< points to the coefficient array. The array is of length numTaps. */
+    q31_t mu;            /**< step size that controls filter coefficient updates. */
+    uint32_t postShift;  /**< bit shift applied to coefficients. */
+
+  } arm_lms_instance_q31;
+
+  /**
+   * @brief Processing function for Q31 LMS filter.
+   * @param[in]  *S points to an instance of the Q15 LMS filter structure.
+   * @param[in]  *pSrc points to the block of input data.
+   * @param[in]  *pRef points to the block of reference data.
+   * @param[out] *pOut points to the block of output data.
+   * @param[out] *pErr points to the block of error data.
+   * @param[in]  blockSize number of samples to process.
+   * @return     none.
+   */
+
+  void arm_lms_q31(
+  const arm_lms_instance_q31 * S,
+  q31_t * pSrc,
+  q31_t * pRef,
+  q31_t * pOut,
+  q31_t * pErr,
+  uint32_t blockSize);
+
+  /**
+   * @brief Initialization function for Q31 LMS filter.
+   * @param[in] *S points to an instance of the Q31 LMS filter structure.
+   * @param[in] numTaps  number of filter coefficients.
+   * @param[in] *pCoeffs points to coefficient buffer.
+   * @param[in] *pState points to state buffer.
+   * @param[in] mu step size that controls filter coefficient updates.
+   * @param[in] blockSize number of samples to process.
+   * @param[in] postShift bit shift applied to coefficients.
+   * @return none.
+   */
+
+  void arm_lms_init_q31(
+  arm_lms_instance_q31 * S,
+  uint16_t numTaps,
+  q31_t * pCoeffs,
+  q31_t * pState,
+  q31_t mu,
+  uint32_t blockSize,
+  uint32_t postShift);
+
+  /**
+   * @brief Instance structure for the floating-point normalized LMS filter.
+   */
+
+  typedef struct
+  {
+    uint16_t numTaps;     /**< number of coefficients in the filter. */
+    float32_t *pState;    /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+    float32_t *pCoeffs;   /**< points to the coefficient array. The array is of length numTaps. */
+    float32_t mu;        /**< step size that control filter coefficient updates. */
+    float32_t energy;    /**< saves previous frame energy. */
+    float32_t x0;        /**< saves previous input sample. */
+  } arm_lms_norm_instance_f32;
+
+  /**
+   * @brief Processing function for floating-point normalized LMS filter.
+   * @param[in] *S points to an instance of the floating-point normalized LMS filter structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[in] *pRef points to the block of reference data.
+   * @param[out] *pOut points to the block of output data.
+   * @param[out] *pErr points to the block of error data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_lms_norm_f32(
+  arm_lms_norm_instance_f32 * S,
+  float32_t * pSrc,
+  float32_t * pRef,
+  float32_t * pOut,
+  float32_t * pErr,
+  uint32_t blockSize);
+
+  /**
+   * @brief Initialization function for floating-point normalized LMS filter.
+   * @param[in] *S points to an instance of the floating-point LMS filter structure.
+   * @param[in] numTaps  number of filter coefficients.
+   * @param[in] *pCoeffs points to coefficient buffer.
+   * @param[in] *pState points to state buffer.
+   * @param[in] mu step size that controls filter coefficient updates.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_lms_norm_init_f32(
+  arm_lms_norm_instance_f32 * S,
+  uint16_t numTaps,
+  float32_t * pCoeffs,
+  float32_t * pState,
+  float32_t mu,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief Instance structure for the Q31 normalized LMS filter.
+   */
+  typedef struct
+  {
+    uint16_t numTaps;     /**< number of coefficients in the filter. */
+    q31_t *pState;        /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+    q31_t *pCoeffs;       /**< points to the coefficient array. The array is of length numTaps. */
+    q31_t mu;             /**< step size that controls filter coefficient updates. */
+    uint8_t postShift;    /**< bit shift applied to coefficients. */
+    q31_t *recipTable;    /**< points to the reciprocal initial value table. */
+    q31_t energy;         /**< saves previous frame energy. */
+    q31_t x0;             /**< saves previous input sample. */
+  } arm_lms_norm_instance_q31;
+
+  /**
+   * @brief Processing function for Q31 normalized LMS filter.
+   * @param[in] *S points to an instance of the Q31 normalized LMS filter structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[in] *pRef points to the block of reference data.
+   * @param[out] *pOut points to the block of output data.
+   * @param[out] *pErr points to the block of error data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_lms_norm_q31(
+  arm_lms_norm_instance_q31 * S,
+  q31_t * pSrc,
+  q31_t * pRef,
+  q31_t * pOut,
+  q31_t * pErr,
+  uint32_t blockSize);
+
+  /**
+   * @brief Initialization function for Q31 normalized LMS filter.
+   * @param[in] *S points to an instance of the Q31 normalized LMS filter structure.
+   * @param[in] numTaps  number of filter coefficients.
+   * @param[in] *pCoeffs points to coefficient buffer.
+   * @param[in] *pState points to state buffer.
+   * @param[in] mu step size that controls filter coefficient updates.
+   * @param[in] blockSize number of samples to process.
+   * @param[in] postShift bit shift applied to coefficients.
+   * @return none.
+   */
+
+  void arm_lms_norm_init_q31(
+  arm_lms_norm_instance_q31 * S,
+  uint16_t numTaps,
+  q31_t * pCoeffs,
+  q31_t * pState,
+  q31_t mu,
+  uint32_t blockSize,
+  uint8_t postShift);
+
+  /**
+   * @brief Instance structure for the Q15 normalized LMS filter.
+   */
+
+  typedef struct
+  {
+    uint16_t numTaps;    /**< Number of coefficients in the filter. */
+    q15_t *pState;        /**< points to the state variable array. The array is of length numTaps+blockSize-1. */
+    q15_t *pCoeffs;       /**< points to the coefficient array. The array is of length numTaps. */
+    q15_t mu;            /**< step size that controls filter coefficient updates. */
+    uint8_t postShift;   /**< bit shift applied to coefficients. */
+    q15_t *recipTable;   /**< Points to the reciprocal initial value table. */
+    q15_t energy;        /**< saves previous frame energy. */
+    q15_t x0;            /**< saves previous input sample. */
+  } arm_lms_norm_instance_q15;
+
+  /**
+   * @brief Processing function for Q15 normalized LMS filter.
+   * @param[in] *S points to an instance of the Q15 normalized LMS filter structure.
+   * @param[in] *pSrc points to the block of input data.
+   * @param[in] *pRef points to the block of reference data.
+   * @param[out] *pOut points to the block of output data.
+   * @param[out] *pErr points to the block of error data.
+   * @param[in] blockSize number of samples to process.
+   * @return none.
+   */
+
+  void arm_lms_norm_q15(
+  arm_lms_norm_instance_q15 * S,
+  q15_t * pSrc,
+  q15_t * pRef,
+  q15_t * pOut,
+  q15_t * pErr,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief Initialization function for Q15 normalized LMS filter.
+   * @param[in] *S points to an instance of the Q15 normalized LMS filter structure.
+   * @param[in] numTaps  number of filter coefficients.
+   * @param[in] *pCoeffs points to coefficient buffer.
+   * @param[in] *pState points to state buffer.
+   * @param[in] mu step size that controls filter coefficient updates.
+   * @param[in] blockSize number of samples to process.
+   * @param[in] postShift bit shift applied to coefficients.
+   * @return none.
+   */
+
+  void arm_lms_norm_init_q15(
+  arm_lms_norm_instance_q15 * S,
+  uint16_t numTaps,
+  q15_t * pCoeffs,
+  q15_t * pState,
+  q15_t mu,
+  uint32_t blockSize,
+  uint8_t postShift);
+
+  /**
+   * @brief Correlation of floating-point sequences.
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
+   * @return none.
+   */
+
+  void arm_correlate_f32(
+  float32_t * pSrcA,
+  uint32_t srcALen,
+  float32_t * pSrcB,
+  uint32_t srcBLen,
+  float32_t * pDst);
+
+
+   /**
+   * @brief Correlation of Q15 sequences
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
+   * @param[in]  *pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+   * @return none.
+   */
+  void arm_correlate_opt_q15(
+  q15_t * pSrcA,
+  uint32_t srcALen,
+  q15_t * pSrcB,
+  uint32_t srcBLen,
+  q15_t * pDst,
+  q15_t * pScratch);
+
+
+  /**
+   * @brief Correlation of Q15 sequences.
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
+   * @return none.
+   */
+
+  void arm_correlate_q15(
+  q15_t * pSrcA,
+  uint32_t srcALen,
+  q15_t * pSrcB,
+  uint32_t srcBLen,
+  q15_t * pDst);
+
+  /**
+   * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
+   * @return none.
+   */
+
+  void arm_correlate_fast_q15(
+			       q15_t * pSrcA,
+			      uint32_t srcALen,
+			       q15_t * pSrcB,
+			      uint32_t srcBLen,
+			      q15_t * pDst);
+
+
+
+  /**
+   * @brief Correlation of Q15 sequences (fast version) for Cortex-M3 and Cortex-M4.
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
+   * @param[in]  *pScratch points to scratch buffer of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+   * @return none.
+   */
+
+  void arm_correlate_fast_opt_q15(
+  q15_t * pSrcA,
+  uint32_t srcALen,
+  q15_t * pSrcB,
+  uint32_t srcBLen,
+  q15_t * pDst,
+  q15_t * pScratch);
+
+  /**
+   * @brief Correlation of Q31 sequences.
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
+   * @return none.
+   */
+
+  void arm_correlate_q31(
+  q31_t * pSrcA,
+  uint32_t srcALen,
+  q31_t * pSrcB,
+  uint32_t srcBLen,
+  q31_t * pDst);
+
+  /**
+   * @brief Correlation of Q31 sequences (fast version) for Cortex-M3 and Cortex-M4
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
+   * @return none.
+   */
+
+  void arm_correlate_fast_q31(
+  q31_t * pSrcA,
+  uint32_t srcALen,
+  q31_t * pSrcB,
+  uint32_t srcBLen,
+  q31_t * pDst);
+
+
+
+ /**
+   * @brief Correlation of Q7 sequences.
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
+   * @param[in]  *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2.
+   * @param[in]  *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen).
+   * @return none.
+   */
+
+  void arm_correlate_opt_q7(
+  q7_t * pSrcA,
+  uint32_t srcALen,
+  q7_t * pSrcB,
+  uint32_t srcBLen,
+  q7_t * pDst,
+  q15_t * pScratch1,
+  q15_t * pScratch2);
+
+
+  /**
+   * @brief Correlation of Q7 sequences.
+   * @param[in] *pSrcA points to the first input sequence.
+   * @param[in] srcALen length of the first input sequence.
+   * @param[in] *pSrcB points to the second input sequence.
+   * @param[in] srcBLen length of the second input sequence.
+   * @param[out] *pDst points to the block of output data  Length 2 * max(srcALen, srcBLen) - 1.
+   * @return none.
+   */
+
+  void arm_correlate_q7(
+  q7_t * pSrcA,
+  uint32_t srcALen,
+  q7_t * pSrcB,
+  uint32_t srcBLen,
+  q7_t * pDst);
+
+
+  /**
+   * @brief Instance structure for the floating-point sparse FIR filter.
+   */
+  typedef struct
+  {
+    uint16_t numTaps;             /**< number of coefficients in the filter. */
+    uint16_t stateIndex;          /**< state buffer index.  Points to the oldest sample in the state buffer. */
+    float32_t *pState;            /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+    float32_t *pCoeffs;           /**< points to the coefficient array. The array is of length numTaps.*/
+    uint16_t maxDelay;            /**< maximum offset specified by the pTapDelay array. */
+    int32_t *pTapDelay;           /**< points to the array of delay values.  The array is of length numTaps. */
+  } arm_fir_sparse_instance_f32;
+
+  /**
+   * @brief Instance structure for the Q31 sparse FIR filter.
+   */
+
+  typedef struct
+  {
+    uint16_t numTaps;             /**< number of coefficients in the filter. */
+    uint16_t stateIndex;          /**< state buffer index.  Points to the oldest sample in the state buffer. */
+    q31_t *pState;                /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+    q31_t *pCoeffs;               /**< points to the coefficient array. The array is of length numTaps.*/
+    uint16_t maxDelay;            /**< maximum offset specified by the pTapDelay array. */
+    int32_t *pTapDelay;           /**< points to the array of delay values.  The array is of length numTaps. */
+  } arm_fir_sparse_instance_q31;
+
+  /**
+   * @brief Instance structure for the Q15 sparse FIR filter.
+   */
+
+  typedef struct
+  {
+    uint16_t numTaps;             /**< number of coefficients in the filter. */
+    uint16_t stateIndex;          /**< state buffer index.  Points to the oldest sample in the state buffer. */
+    q15_t *pState;                /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+    q15_t *pCoeffs;               /**< points to the coefficient array. The array is of length numTaps.*/
+    uint16_t maxDelay;            /**< maximum offset specified by the pTapDelay array. */
+    int32_t *pTapDelay;           /**< points to the array of delay values.  The array is of length numTaps. */
+  } arm_fir_sparse_instance_q15;
+
+  /**
+   * @brief Instance structure for the Q7 sparse FIR filter.
+   */
+
+  typedef struct
+  {
+    uint16_t numTaps;             /**< number of coefficients in the filter. */
+    uint16_t stateIndex;          /**< state buffer index.  Points to the oldest sample in the state buffer. */
+    q7_t *pState;                 /**< points to the state buffer array. The array is of length maxDelay+blockSize-1. */
+    q7_t *pCoeffs;                /**< points to the coefficient array. The array is of length numTaps.*/
+    uint16_t maxDelay;            /**< maximum offset specified by the pTapDelay array. */
+    int32_t *pTapDelay;           /**< points to the array of delay values.  The array is of length numTaps. */
+  } arm_fir_sparse_instance_q7;
+
+  /**
+   * @brief Processing function for the floating-point sparse FIR filter.
+   * @param[in]  *S          points to an instance of the floating-point sparse FIR structure.
+   * @param[in]  *pSrc       points to the block of input data.
+   * @param[out] *pDst       points to the block of output data
+   * @param[in]  *pScratchIn points to a temporary buffer of size blockSize.
+   * @param[in]  blockSize   number of input samples to process per call.
+   * @return none.
+   */
+
+  void arm_fir_sparse_f32(
+  arm_fir_sparse_instance_f32 * S,
+  float32_t * pSrc,
+  float32_t * pDst,
+  float32_t * pScratchIn,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Initialization function for the floating-point sparse FIR filter.
+   * @param[in,out] *S         points to an instance of the floating-point sparse FIR structure.
+   * @param[in]     numTaps    number of nonzero coefficients in the filter.
+   * @param[in]     *pCoeffs   points to the array of filter coefficients.
+   * @param[in]     *pState    points to the state buffer.
+   * @param[in]     *pTapDelay points to the array of offset times.
+   * @param[in]     maxDelay   maximum offset time supported.
+   * @param[in]     blockSize  number of samples that will be processed per block.
+   * @return none
+   */
+
+  void arm_fir_sparse_init_f32(
+  arm_fir_sparse_instance_f32 * S,
+  uint16_t numTaps,
+  float32_t * pCoeffs,
+  float32_t * pState,
+  int32_t * pTapDelay,
+  uint16_t maxDelay,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the Q31 sparse FIR filter.
+   * @param[in]  *S          points to an instance of the Q31 sparse FIR structure.
+   * @param[in]  *pSrc       points to the block of input data.
+   * @param[out] *pDst       points to the block of output data
+   * @param[in]  *pScratchIn points to a temporary buffer of size blockSize.
+   * @param[in]  blockSize   number of input samples to process per call.
+   * @return none.
+   */
+
+  void arm_fir_sparse_q31(
+  arm_fir_sparse_instance_q31 * S,
+  q31_t * pSrc,
+  q31_t * pDst,
+  q31_t * pScratchIn,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Initialization function for the Q31 sparse FIR filter.
+   * @param[in,out] *S         points to an instance of the Q31 sparse FIR structure.
+   * @param[in]     numTaps    number of nonzero coefficients in the filter.
+   * @param[in]     *pCoeffs   points to the array of filter coefficients.
+   * @param[in]     *pState    points to the state buffer.
+   * @param[in]     *pTapDelay points to the array of offset times.
+   * @param[in]     maxDelay   maximum offset time supported.
+   * @param[in]     blockSize  number of samples that will be processed per block.
+   * @return none
+   */
+
+  void arm_fir_sparse_init_q31(
+  arm_fir_sparse_instance_q31 * S,
+  uint16_t numTaps,
+  q31_t * pCoeffs,
+  q31_t * pState,
+  int32_t * pTapDelay,
+  uint16_t maxDelay,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the Q15 sparse FIR filter.
+   * @param[in]  *S           points to an instance of the Q15 sparse FIR structure.
+   * @param[in]  *pSrc        points to the block of input data.
+   * @param[out] *pDst        points to the block of output data
+   * @param[in]  *pScratchIn  points to a temporary buffer of size blockSize.
+   * @param[in]  *pScratchOut points to a temporary buffer of size blockSize.
+   * @param[in]  blockSize    number of input samples to process per call.
+   * @return none.
+   */
+
+  void arm_fir_sparse_q15(
+  arm_fir_sparse_instance_q15 * S,
+  q15_t * pSrc,
+  q15_t * pDst,
+  q15_t * pScratchIn,
+  q31_t * pScratchOut,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief  Initialization function for the Q15 sparse FIR filter.
+   * @param[in,out] *S         points to an instance of the Q15 sparse FIR structure.
+   * @param[in]     numTaps    number of nonzero coefficients in the filter.
+   * @param[in]     *pCoeffs   points to the array of filter coefficients.
+   * @param[in]     *pState    points to the state buffer.
+   * @param[in]     *pTapDelay points to the array of offset times.
+   * @param[in]     maxDelay   maximum offset time supported.
+   * @param[in]     blockSize  number of samples that will be processed per block.
+   * @return none
+   */
+
+  void arm_fir_sparse_init_q15(
+  arm_fir_sparse_instance_q15 * S,
+  uint16_t numTaps,
+  q15_t * pCoeffs,
+  q15_t * pState,
+  int32_t * pTapDelay,
+  uint16_t maxDelay,
+  uint32_t blockSize);
+
+  /**
+   * @brief Processing function for the Q7 sparse FIR filter.
+   * @param[in]  *S           points to an instance of the Q7 sparse FIR structure.
+   * @param[in]  *pSrc        points to the block of input data.
+   * @param[out] *pDst        points to the block of output data
+   * @param[in]  *pScratchIn  points to a temporary buffer of size blockSize.
+   * @param[in]  *pScratchOut points to a temporary buffer of size blockSize.
+   * @param[in]  blockSize    number of input samples to process per call.
+   * @return none.
+   */
+
+  void arm_fir_sparse_q7(
+  arm_fir_sparse_instance_q7 * S,
+  q7_t * pSrc,
+  q7_t * pDst,
+  q7_t * pScratchIn,
+  q31_t * pScratchOut,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Initialization function for the Q7 sparse FIR filter.
+   * @param[in,out] *S         points to an instance of the Q7 sparse FIR structure.
+   * @param[in]     numTaps    number of nonzero coefficients in the filter.
+   * @param[in]     *pCoeffs   points to the array of filter coefficients.
+   * @param[in]     *pState    points to the state buffer.
+   * @param[in]     *pTapDelay points to the array of offset times.
+   * @param[in]     maxDelay   maximum offset time supported.
+   * @param[in]     blockSize  number of samples that will be processed per block.
+   * @return none
+   */
+
+  void arm_fir_sparse_init_q7(
+  arm_fir_sparse_instance_q7 * S,
+  uint16_t numTaps,
+  q7_t * pCoeffs,
+  q7_t * pState,
+  int32_t * pTapDelay,
+  uint16_t maxDelay,
+  uint32_t blockSize);
+
+
+  /*
+   * @brief  Floating-point sin_cos function.
+   * @param[in]  theta    input value in degrees
+   * @param[out] *pSinVal points to the processed sine output.
+   * @param[out] *pCosVal points to the processed cos output.
+   * @return none.
+   */
+
+  void arm_sin_cos_f32(
+  float32_t theta,
+  float32_t * pSinVal,
+  float32_t * pCcosVal);
+
+  /*
+   * @brief  Q31 sin_cos function.
+   * @param[in]  theta    scaled input value in degrees
+   * @param[out] *pSinVal points to the processed sine output.
+   * @param[out] *pCosVal points to the processed cosine output.
+   * @return none.
+   */
+
+  void arm_sin_cos_q31(
+  q31_t theta,
+  q31_t * pSinVal,
+  q31_t * pCosVal);
+
+
+  /**
+   * @brief  Floating-point complex conjugate.
+   * @param[in]  *pSrc points to the input vector
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  numSamples number of complex samples in each vector
+   * @return none.
+   */
+
+  void arm_cmplx_conj_f32(
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief  Q31 complex conjugate.
+   * @param[in]  *pSrc points to the input vector
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  numSamples number of complex samples in each vector
+   * @return none.
+   */
+
+  void arm_cmplx_conj_q31(
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief  Q15 complex conjugate.
+   * @param[in]  *pSrc points to the input vector
+   * @param[out]  *pDst points to the output vector
+   * @param[in]  numSamples number of complex samples in each vector
+   * @return none.
+   */
+
+  void arm_cmplx_conj_q15(
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t numSamples);
+
+
+
+  /**
+   * @brief  Floating-point complex magnitude squared
+   * @param[in]  *pSrc points to the complex input vector
+   * @param[out]  *pDst points to the real output vector
+   * @param[in]  numSamples number of complex samples in the input vector
+   * @return none.
+   */
+
+  void arm_cmplx_mag_squared_f32(
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief  Q31 complex magnitude squared
+   * @param[in]  *pSrc points to the complex input vector
+   * @param[out]  *pDst points to the real output vector
+   * @param[in]  numSamples number of complex samples in the input vector
+   * @return none.
+   */
+
+  void arm_cmplx_mag_squared_q31(
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief  Q15 complex magnitude squared
+   * @param[in]  *pSrc points to the complex input vector
+   * @param[out]  *pDst points to the real output vector
+   * @param[in]  numSamples number of complex samples in the input vector
+   * @return none.
+   */
+
+  void arm_cmplx_mag_squared_q15(
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t numSamples);
+
+
+ /**
+   * @ingroup groupController
+   */
+
+  /**
+   * @defgroup PID PID Motor Control
+   *
+   * A Proportional Integral Derivative (PID) controller is a generic feedback control
+   * loop mechanism widely used in industrial control systems.
+   * A PID controller is the most commonly used type of feedback controller.
+   *
+   * This set of functions implements (PID) controllers
+   * for Q15, Q31, and floating-point data types.  The functions operate on a single sample
+   * of data and each call to the function returns a single processed value.
+   * <code>S</code> points to an instance of the PID control data structure.  <code>in</code>
+   * is the input sample value. The functions return the output value.
+   *
+   * \par Algorithm:
+   * <pre>
+   *    y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]
+   *    A0 = Kp + Ki + Kd
+   *    A1 = (-Kp ) - (2 * Kd )
+   *    A2 = Kd  </pre>
+   *
+   * \par
+   * where \c Kp is proportional constant, \c Ki is Integral constant and \c Kd is Derivative constant
+   *
+   * \par
+   * \image html PID.gif "Proportional Integral Derivative Controller"
+   *
+   * \par
+   * The PID controller calculates an "error" value as the difference between
+   * the measured output and the reference input.
+   * The controller attempts to minimize the error by adjusting the process control inputs.
+   * The proportional value determines the reaction to the current error,
+   * the integral value determines the reaction based on the sum of recent errors,
+   * and the derivative value determines the reaction based on the rate at which the error has been changing.
+   *
+   * \par Instance Structure
+   * The Gains A0, A1, A2 and state variables for a PID controller are stored together in an instance data structure.
+   * A separate instance structure must be defined for each PID Controller.
+   * There are separate instance structure declarations for each of the 3 supported data types.
+   *
+   * \par Reset Functions
+   * There is also an associated reset function for each data type which clears the state array.
+   *
+   * \par Initialization Functions
+   * There is also an associated initialization function for each data type.
+   * The initialization function performs the following operations:
+   * - Initializes the Gains A0, A1, A2 from Kp,Ki, Kd gains.
+   * - Zeros out the values in the state buffer.
+   *
+   * \par
+   * Instance structure cannot be placed into a const data section and it is recommended to use the initialization function.
+   *
+   * \par Fixed-Point Behavior
+   * Care must be taken when using the fixed-point versions of the PID Controller functions.
+   * In particular, the overflow and saturation behavior of the accumulator used in each function must be considered.
+   * Refer to the function specific documentation below for usage guidelines.
+   */
+
+  /**
+   * @addtogroup PID
+   * @{
+   */
+
+  /**
+   * @brief  Process function for the floating-point PID Control.
+   * @param[in,out] *S is an instance of the floating-point PID Control structure
+   * @param[in] in input sample to process
+   * @return out processed output sample.
+   */
+
+
+  static __INLINE float32_t arm_pid_f32(
+  arm_pid_instance_f32 * S,
+  float32_t in)
+  {
+    float32_t out;
+
+    /* y[n] = y[n-1] + A0 * x[n] + A1 * x[n-1] + A2 * x[n-2]  */
+    out = (S->A0 * in) +
+      (S->A1 * S->state[0]) + (S->A2 * S->state[1]) + (S->state[2]);
+
+    /* Update state */
+    S->state[1] = S->state[0];
+    S->state[0] = in;
+    S->state[2] = out;
+
+    /* return to application */
+    return (out);
+
+  }
+
+  /**
+   * @brief  Process function for the Q31 PID Control.
+   * @param[in,out] *S points to an instance of the Q31 PID Control structure
+   * @param[in] in input sample to process
+   * @return out processed output sample.
+   *
+   * <b>Scaling and Overflow Behavior:</b>
+   * \par
+   * The function is implemented using an internal 64-bit accumulator.
+   * The accumulator has a 2.62 format and maintains full precision of the intermediate multiplication results but provides only a single guard bit.
+   * Thus, if the accumulator result overflows it wraps around rather than clip.
+   * In order to avoid overflows completely the input signal must be scaled down by 2 bits as there are four additions.
+   * After all multiply-accumulates are performed, the 2.62 accumulator is truncated to 1.32 format and then saturated to 1.31 format.
+   */
+
+  static __INLINE q31_t arm_pid_q31(
+  arm_pid_instance_q31 * S,
+  q31_t in)
+  {
+    q63_t acc;
+    q31_t out;
+
+    /* acc = A0 * x[n]  */
+    acc = (q63_t) S->A0 * in;
+
+    /* acc += A1 * x[n-1] */
+    acc += (q63_t) S->A1 * S->state[0];
+
+    /* acc += A2 * x[n-2]  */
+    acc += (q63_t) S->A2 * S->state[1];
+
+    /* convert output to 1.31 format to add y[n-1] */
+    out = (q31_t) (acc >> 31u);
+
+    /* out += y[n-1] */
+    out += S->state[2];
+
+    /* Update state */
+    S->state[1] = S->state[0];
+    S->state[0] = in;
+    S->state[2] = out;
+
+    /* return to application */
+    return (out);
+
+  }
+
+  /**
+   * @brief  Process function for the Q15 PID Control.
+   * @param[in,out] *S points to an instance of the Q15 PID Control structure
+   * @param[in] in input sample to process
+   * @return out processed output sample.
+   *
+   * <b>Scaling and Overflow Behavior:</b>
+   * \par
+   * The function is implemented using a 64-bit internal accumulator.
+   * Both Gains and state variables are represented in 1.15 format and multiplications yield a 2.30 result.
+   * The 2.30 intermediate results are accumulated in a 64-bit accumulator in 34.30 format.
+   * There is no risk of internal overflow with this approach and the full precision of intermediate multiplications is preserved.
+   * After all additions have been performed, the accumulator is truncated to 34.15 format by discarding low 15 bits.
+   * Lastly, the accumulator is saturated to yield a result in 1.15 format.
+   */
+
+  static __INLINE q15_t arm_pid_q15(
+  arm_pid_instance_q15 * S,
+  q15_t in)
+  {
+    q63_t acc;
+    q15_t out;
+
+#ifndef ARM_MATH_CM0_FAMILY
+    __SIMD32_TYPE *vstate;
+
+    /* Implementation of PID controller */
+
+    /* acc = A0 * x[n]  */
+    acc = (q31_t) __SMUAD(S->A0, in);
+
+    /* acc += A1 * x[n-1] + A2 * x[n-2]  */
+    vstate = __SIMD32_CONST(S->state);
+    acc = __SMLALD(S->A1, (q31_t) *vstate, acc);
+
+#else
+    /* acc = A0 * x[n]  */
+    acc = ((q31_t) S->A0) * in;
+
+    /* acc += A1 * x[n-1] + A2 * x[n-2]  */
+    acc += (q31_t) S->A1 * S->state[0];
+    acc += (q31_t) S->A2 * S->state[1];
+
+#endif
+
+    /* acc += y[n-1] */
+    acc += (q31_t) S->state[2] << 15;
+
+    /* saturate the output */
+    out = (q15_t) (__SSAT((acc >> 15), 16));
+
+    /* Update state */
+    S->state[1] = S->state[0];
+    S->state[0] = in;
+    S->state[2] = out;
+
+    /* return to application */
+    return (out);
+
+  }
+
+  /**
+   * @} end of PID group
+   */
+
+
+  /**
+   * @brief Floating-point matrix inverse.
+   * @param[in]  *src points to the instance of the input floating-point matrix structure.
+   * @param[out] *dst points to the instance of the output floating-point matrix structure.
+   * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+   * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+   */
+
+  arm_status arm_mat_inverse_f32(
+  const arm_matrix_instance_f32 * src,
+  arm_matrix_instance_f32 * dst);
+
+
+  /**
+   * @brief Floating-point matrix inverse.
+   * @param[in]  *src points to the instance of the input floating-point matrix structure.
+   * @param[out] *dst points to the instance of the output floating-point matrix structure.
+   * @return The function returns ARM_MATH_SIZE_MISMATCH, if the dimensions do not match.
+   * If the input matrix is singular (does not have an inverse), then the algorithm terminates and returns error status ARM_MATH_SINGULAR.
+   */
+
+  arm_status arm_mat_inverse_f64(
+  const arm_matrix_instance_f64 * src,
+  arm_matrix_instance_f64 * dst);
+
+
+
+  /**
+   * @ingroup groupController
+   */
+
+
+  /**
+   * @defgroup clarke Vector Clarke Transform
+   * Forward Clarke transform converts the instantaneous stator phases into a two-coordinate time invariant vector.
+   * Generally the Clarke transform uses three-phase currents <code>Ia, Ib and Ic</code> to calculate currents
+   * in the two-phase orthogonal stator axis <code>Ialpha</code> and <code>Ibeta</code>.
+   * When <code>Ialpha</code> is superposed with <code>Ia</code> as shown in the figure below
+   * \image html clarke.gif Stator current space vector and its components in (a,b).
+   * and <code>Ia + Ib + Ic = 0</code>, in this condition <code>Ialpha</code> and <code>Ibeta</code>
+   * can be calculated using only <code>Ia</code> and <code>Ib</code>.
+   *
+   * The function operates on a single sample of data and each call to the function returns the processed output.
+   * The library provides separate functions for Q31 and floating-point data types.
+   * \par Algorithm
+   * \image html clarkeFormula.gif
+   * where <code>Ia</code> and <code>Ib</code> are the instantaneous stator phases and
+   * <code>pIalpha</code> and <code>pIbeta</code> are the two coordinates of time invariant vector.
+   * \par Fixed-Point Behavior
+   * Care must be taken when using the Q31 version of the Clarke transform.
+   * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+   * Refer to the function specific documentation below for usage guidelines.
+   */
+
+  /**
+   * @addtogroup clarke
+   * @{
+   */
+
+  /**
+   *
+   * @brief  Floating-point Clarke transform
+   * @param[in]       Ia       input three-phase coordinate <code>a</code>
+   * @param[in]       Ib       input three-phase coordinate <code>b</code>
+   * @param[out]      *pIalpha points to output two-phase orthogonal vector axis alpha
+   * @param[out]      *pIbeta  points to output two-phase orthogonal vector axis beta
+   * @return none.
+   */
+
+  static __INLINE void arm_clarke_f32(
+  float32_t Ia,
+  float32_t Ib,
+  float32_t * pIalpha,
+  float32_t * pIbeta)
+  {
+    /* Calculate pIalpha using the equation, pIalpha = Ia */
+    *pIalpha = Ia;
+
+    /* Calculate pIbeta using the equation, pIbeta = (1/sqrt(3)) * Ia + (2/sqrt(3)) * Ib */
+    *pIbeta =
+      ((float32_t) 0.57735026919 * Ia + (float32_t) 1.15470053838 * Ib);
+
+  }
+
+  /**
+   * @brief  Clarke transform for Q31 version
+   * @param[in]       Ia       input three-phase coordinate <code>a</code>
+   * @param[in]       Ib       input three-phase coordinate <code>b</code>
+   * @param[out]      *pIalpha points to output two-phase orthogonal vector axis alpha
+   * @param[out]      *pIbeta  points to output two-phase orthogonal vector axis beta
+   * @return none.
+   *
+   * <b>Scaling and Overflow Behavior:</b>
+   * \par
+   * The function is implemented using an internal 32-bit accumulator.
+   * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+   * There is saturation on the addition, hence there is no risk of overflow.
+   */
+
+  static __INLINE void arm_clarke_q31(
+  q31_t Ia,
+  q31_t Ib,
+  q31_t * pIalpha,
+  q31_t * pIbeta)
+  {
+    q31_t product1, product2;                    /* Temporary variables used to store intermediate results */
+
+    /* Calculating pIalpha from Ia by equation pIalpha = Ia */
+    *pIalpha = Ia;
+
+    /* Intermediate product is calculated by (1/(sqrt(3)) * Ia) */
+    product1 = (q31_t) (((q63_t) Ia * 0x24F34E8B) >> 30);
+
+    /* Intermediate product is calculated by (2/sqrt(3) * Ib) */
+    product2 = (q31_t) (((q63_t) Ib * 0x49E69D16) >> 30);
+
+    /* pIbeta is calculated by adding the intermediate products */
+    *pIbeta = __QADD(product1, product2);
+  }
+
+  /**
+   * @} end of clarke group
+   */
+
+  /**
+   * @brief  Converts the elements of the Q7 vector to Q31 vector.
+   * @param[in]  *pSrc     input pointer
+   * @param[out]  *pDst    output pointer
+   * @param[in]  blockSize number of samples to process
+   * @return none.
+   */
+  void arm_q7_to_q31(
+  q7_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+
+
+
+  /**
+   * @ingroup groupController
+   */
+
+  /**
+   * @defgroup inv_clarke Vector Inverse Clarke Transform
+   * Inverse Clarke transform converts the two-coordinate time invariant vector into instantaneous stator phases.
+   *
+   * The function operates on a single sample of data and each call to the function returns the processed output.
+   * The library provides separate functions for Q31 and floating-point data types.
+   * \par Algorithm
+   * \image html clarkeInvFormula.gif
+   * where <code>pIa</code> and <code>pIb</code> are the instantaneous stator phases and
+   * <code>Ialpha</code> and <code>Ibeta</code> are the two coordinates of time invariant vector.
+   * \par Fixed-Point Behavior
+   * Care must be taken when using the Q31 version of the Clarke transform.
+   * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+   * Refer to the function specific documentation below for usage guidelines.
+   */
+
+  /**
+   * @addtogroup inv_clarke
+   * @{
+   */
+
+   /**
+   * @brief  Floating-point Inverse Clarke transform
+   * @param[in]       Ialpha  input two-phase orthogonal vector axis alpha
+   * @param[in]       Ibeta   input two-phase orthogonal vector axis beta
+   * @param[out]      *pIa    points to output three-phase coordinate <code>a</code>
+   * @param[out]      *pIb    points to output three-phase coordinate <code>b</code>
+   * @return none.
+   */
+
+
+  static __INLINE void arm_inv_clarke_f32(
+  float32_t Ialpha,
+  float32_t Ibeta,
+  float32_t * pIa,
+  float32_t * pIb)
+  {
+    /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+    *pIa = Ialpha;
+
+    /* Calculating pIb from Ialpha and Ibeta by equation pIb = -(1/2) * Ialpha + (sqrt(3)/2) * Ibeta */
+    *pIb = -0.5 * Ialpha + (float32_t) 0.8660254039 *Ibeta;
+
+  }
+
+  /**
+   * @brief  Inverse Clarke transform for Q31 version
+   * @param[in]       Ialpha  input two-phase orthogonal vector axis alpha
+   * @param[in]       Ibeta   input two-phase orthogonal vector axis beta
+   * @param[out]      *pIa    points to output three-phase coordinate <code>a</code>
+   * @param[out]      *pIb    points to output three-phase coordinate <code>b</code>
+   * @return none.
+   *
+   * <b>Scaling and Overflow Behavior:</b>
+   * \par
+   * The function is implemented using an internal 32-bit accumulator.
+   * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+   * There is saturation on the subtraction, hence there is no risk of overflow.
+   */
+
+  static __INLINE void arm_inv_clarke_q31(
+  q31_t Ialpha,
+  q31_t Ibeta,
+  q31_t * pIa,
+  q31_t * pIb)
+  {
+    q31_t product1, product2;                    /* Temporary variables used to store intermediate results */
+
+    /* Calculating pIa from Ialpha by equation pIa = Ialpha */
+    *pIa = Ialpha;
+
+    /* Intermediate product is calculated by (1/(2*sqrt(3)) * Ia) */
+    product1 = (q31_t) (((q63_t) (Ialpha) * (0x40000000)) >> 31);
+
+    /* Intermediate product is calculated by (1/sqrt(3) * pIb) */
+    product2 = (q31_t) (((q63_t) (Ibeta) * (0x6ED9EBA1)) >> 31);
+
+    /* pIb is calculated by subtracting the products */
+    *pIb = __QSUB(product2, product1);
+
+  }
+
+  /**
+   * @} end of inv_clarke group
+   */
+
+  /**
+   * @brief  Converts the elements of the Q7 vector to Q15 vector.
+   * @param[in]  *pSrc     input pointer
+   * @param[out] *pDst     output pointer
+   * @param[in]  blockSize number of samples to process
+   * @return none.
+   */
+  void arm_q7_to_q15(
+  q7_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+
+
+  /**
+   * @ingroup groupController
+   */
+
+  /**
+   * @defgroup park Vector Park Transform
+   *
+   * Forward Park transform converts the input two-coordinate vector to flux and torque components.
+   * The Park transform can be used to realize the transformation of the <code>Ialpha</code> and the <code>Ibeta</code> currents
+   * from the stationary to the moving reference frame and control the spatial relationship between
+   * the stator vector current and rotor flux vector.
+   * If we consider the d axis aligned with the rotor flux, the diagram below shows the
+   * current vector and the relationship from the two reference frames:
+   * \image html park.gif "Stator current space vector and its component in (a,b) and in the d,q rotating reference frame"
+   *
+   * The function operates on a single sample of data and each call to the function returns the processed output.
+   * The library provides separate functions for Q31 and floating-point data types.
+   * \par Algorithm
+   * \image html parkFormula.gif
+   * where <code>Ialpha</code> and <code>Ibeta</code> are the stator vector components,
+   * <code>pId</code> and <code>pIq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the
+   * cosine and sine values of theta (rotor flux position).
+   * \par Fixed-Point Behavior
+   * Care must be taken when using the Q31 version of the Park transform.
+   * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+   * Refer to the function specific documentation below for usage guidelines.
+   */
+
+  /**
+   * @addtogroup park
+   * @{
+   */
+
+  /**
+   * @brief Floating-point Park transform
+   * @param[in]       Ialpha input two-phase vector coordinate alpha
+   * @param[in]       Ibeta  input two-phase vector coordinate beta
+   * @param[out]      *pId   points to output	rotor reference frame d
+   * @param[out]      *pIq   points to output	rotor reference frame q
+   * @param[in]       sinVal sine value of rotation angle theta
+   * @param[in]       cosVal cosine value of rotation angle theta
+   * @return none.
+   *
+   * The function implements the forward Park transform.
+   *
+   */
+
+  static __INLINE void arm_park_f32(
+  float32_t Ialpha,
+  float32_t Ibeta,
+  float32_t * pId,
+  float32_t * pIq,
+  float32_t sinVal,
+  float32_t cosVal)
+  {
+    /* Calculate pId using the equation, pId = Ialpha * cosVal + Ibeta * sinVal */
+    *pId = Ialpha * cosVal + Ibeta * sinVal;
+
+    /* Calculate pIq using the equation, pIq = - Ialpha * sinVal + Ibeta * cosVal */
+    *pIq = -Ialpha * sinVal + Ibeta * cosVal;
+
+  }
+
+  /**
+   * @brief  Park transform for Q31 version
+   * @param[in]       Ialpha input two-phase vector coordinate alpha
+   * @param[in]       Ibeta  input two-phase vector coordinate beta
+   * @param[out]      *pId   points to output rotor reference frame d
+   * @param[out]      *pIq   points to output rotor reference frame q
+   * @param[in]       sinVal sine value of rotation angle theta
+   * @param[in]       cosVal cosine value of rotation angle theta
+   * @return none.
+   *
+   * <b>Scaling and Overflow Behavior:</b>
+   * \par
+   * The function is implemented using an internal 32-bit accumulator.
+   * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+   * There is saturation on the addition and subtraction, hence there is no risk of overflow.
+   */
+
+
+  static __INLINE void arm_park_q31(
+  q31_t Ialpha,
+  q31_t Ibeta,
+  q31_t * pId,
+  q31_t * pIq,
+  q31_t sinVal,
+  q31_t cosVal)
+  {
+    q31_t product1, product2;                    /* Temporary variables used to store intermediate results */
+    q31_t product3, product4;                    /* Temporary variables used to store intermediate results */
+
+    /* Intermediate product is calculated by (Ialpha * cosVal) */
+    product1 = (q31_t) (((q63_t) (Ialpha) * (cosVal)) >> 31);
+
+    /* Intermediate product is calculated by (Ibeta * sinVal) */
+    product2 = (q31_t) (((q63_t) (Ibeta) * (sinVal)) >> 31);
+
+
+    /* Intermediate product is calculated by (Ialpha * sinVal) */
+    product3 = (q31_t) (((q63_t) (Ialpha) * (sinVal)) >> 31);
+
+    /* Intermediate product is calculated by (Ibeta * cosVal) */
+    product4 = (q31_t) (((q63_t) (Ibeta) * (cosVal)) >> 31);
+
+    /* Calculate pId by adding the two intermediate products 1 and 2 */
+    *pId = __QADD(product1, product2);
+
+    /* Calculate pIq by subtracting the two intermediate products 3 from 4 */
+    *pIq = __QSUB(product4, product3);
+  }
+
+  /**
+   * @} end of park group
+   */
+
+  /**
+   * @brief  Converts the elements of the Q7 vector to floating-point vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[out]  *pDst is output pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @return none.
+   */
+  void arm_q7_to_float(
+  q7_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @ingroup groupController
+   */
+
+  /**
+   * @defgroup inv_park Vector Inverse Park transform
+   * Inverse Park transform converts the input flux and torque components to two-coordinate vector.
+   *
+   * The function operates on a single sample of data and each call to the function returns the processed output.
+   * The library provides separate functions for Q31 and floating-point data types.
+   * \par Algorithm
+   * \image html parkInvFormula.gif
+   * where <code>pIalpha</code> and <code>pIbeta</code> are the stator vector components,
+   * <code>Id</code> and <code>Iq</code> are rotor vector components and <code>cosVal</code> and <code>sinVal</code> are the
+   * cosine and sine values of theta (rotor flux position).
+   * \par Fixed-Point Behavior
+   * Care must be taken when using the Q31 version of the Park transform.
+   * In particular, the overflow and saturation behavior of the accumulator used must be considered.
+   * Refer to the function specific documentation below for usage guidelines.
+   */
+
+  /**
+   * @addtogroup inv_park
+   * @{
+   */
+
+   /**
+   * @brief  Floating-point Inverse Park transform
+   * @param[in]       Id        input coordinate of rotor reference frame d
+   * @param[in]       Iq        input coordinate of rotor reference frame q
+   * @param[out]      *pIalpha  points to output two-phase orthogonal vector axis alpha
+   * @param[out]      *pIbeta   points to output two-phase orthogonal vector axis beta
+   * @param[in]       sinVal    sine value of rotation angle theta
+   * @param[in]       cosVal    cosine value of rotation angle theta
+   * @return none.
+   */
+
+  static __INLINE void arm_inv_park_f32(
+  float32_t Id,
+  float32_t Iq,
+  float32_t * pIalpha,
+  float32_t * pIbeta,
+  float32_t sinVal,
+  float32_t cosVal)
+  {
+    /* Calculate pIalpha using the equation, pIalpha = Id * cosVal - Iq * sinVal */
+    *pIalpha = Id * cosVal - Iq * sinVal;
+
+    /* Calculate pIbeta using the equation, pIbeta = Id * sinVal + Iq * cosVal */
+    *pIbeta = Id * sinVal + Iq * cosVal;
+
+  }
+
+
+  /**
+   * @brief  Inverse Park transform for	Q31 version
+   * @param[in]       Id        input coordinate of rotor reference frame d
+   * @param[in]       Iq        input coordinate of rotor reference frame q
+   * @param[out]      *pIalpha  points to output two-phase orthogonal vector axis alpha
+   * @param[out]      *pIbeta   points to output two-phase orthogonal vector axis beta
+   * @param[in]       sinVal    sine value of rotation angle theta
+   * @param[in]       cosVal    cosine value of rotation angle theta
+   * @return none.
+   *
+   * <b>Scaling and Overflow Behavior:</b>
+   * \par
+   * The function is implemented using an internal 32-bit accumulator.
+   * The accumulator maintains 1.31 format by truncating lower 31 bits of the intermediate multiplication in 2.62 format.
+   * There is saturation on the addition, hence there is no risk of overflow.
+   */
+
+
+  static __INLINE void arm_inv_park_q31(
+  q31_t Id,
+  q31_t Iq,
+  q31_t * pIalpha,
+  q31_t * pIbeta,
+  q31_t sinVal,
+  q31_t cosVal)
+  {
+    q31_t product1, product2;                    /* Temporary variables used to store intermediate results */
+    q31_t product3, product4;                    /* Temporary variables used to store intermediate results */
+
+    /* Intermediate product is calculated by (Id * cosVal) */
+    product1 = (q31_t) (((q63_t) (Id) * (cosVal)) >> 31);
+
+    /* Intermediate product is calculated by (Iq * sinVal) */
+    product2 = (q31_t) (((q63_t) (Iq) * (sinVal)) >> 31);
+
+
+    /* Intermediate product is calculated by (Id * sinVal) */
+    product3 = (q31_t) (((q63_t) (Id) * (sinVal)) >> 31);
+
+    /* Intermediate product is calculated by (Iq * cosVal) */
+    product4 = (q31_t) (((q63_t) (Iq) * (cosVal)) >> 31);
+
+    /* Calculate pIalpha by using the two intermediate products 1 and 2 */
+    *pIalpha = __QSUB(product1, product2);
+
+    /* Calculate pIbeta by using the two intermediate products 3 and 4 */
+    *pIbeta = __QADD(product4, product3);
+
+  }
+
+  /**
+   * @} end of Inverse park group
+   */
+
+
+  /**
+   * @brief  Converts the elements of the Q31 vector to floating-point vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[out]  *pDst is output pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @return none.
+   */
+  void arm_q31_to_float(
+  q31_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @ingroup groupInterpolation
+   */
+
+  /**
+   * @defgroup LinearInterpolate Linear Interpolation
+   *
+   * Linear interpolation is a method of curve fitting using linear polynomials.
+   * Linear interpolation works by effectively drawing a straight line between two neighboring samples and returning the appropriate point along that line
+   *
+   * \par
+   * \image html LinearInterp.gif "Linear interpolation"
+   *
+   * \par
+   * A  Linear Interpolate function calculates an output value(y), for the input(x)
+   * using linear interpolation of the input values x0, x1( nearest input values) and the output values y0 and y1(nearest output values)
+   *
+   * \par Algorithm:
+   * <pre>
+   *       y = y0 + (x - x0) * ((y1 - y0)/(x1-x0))
+   *       where x0, x1 are nearest values of input x
+   *             y0, y1 are nearest values to output y
+   * </pre>
+   *
+   * \par
+   * This set of functions implements Linear interpolation process
+   * for Q7, Q15, Q31, and floating-point data types.  The functions operate on a single
+   * sample of data and each call to the function returns a single processed value.
+   * <code>S</code> points to an instance of the Linear Interpolate function data structure.
+   * <code>x</code> is the input sample value. The functions returns the output value.
+   *
+   * \par
+   * if x is outside of the table boundary, Linear interpolation returns first value of the table
+   * if x is below input range and returns last value of table if x is above range.
+   */
+
+  /**
+   * @addtogroup LinearInterpolate
+   * @{
+   */
+
+  /**
+   * @brief  Process function for the floating-point Linear Interpolation Function.
+   * @param[in,out] *S is an instance of the floating-point Linear Interpolation structure
+   * @param[in] x input sample to process
+   * @return y processed output sample.
+   *
+   */
+
+  static __INLINE float32_t arm_linear_interp_f32(
+  arm_linear_interp_instance_f32 * S,
+  float32_t x)
+  {
+
+    float32_t y;
+    float32_t x0, x1;                            /* Nearest input values */
+    float32_t y0, y1;                            /* Nearest output values */
+    float32_t xSpacing = S->xSpacing;            /* spacing between input values */
+    int32_t i;                                   /* Index variable */
+    float32_t *pYData = S->pYData;               /* pointer to output table */
+
+    /* Calculation of index */
+    i = (int32_t) ((x - S->x1) / xSpacing);
+
+    if(i < 0)
+    {
+      /* Iniatilize output for below specified range as least output value of table */
+      y = pYData[0];
+    }
+    else if((uint32_t)i >= S->nValues)
+    {
+      /* Iniatilize output for above specified range as last output value of table */
+      y = pYData[S->nValues - 1];
+    }
+    else
+    {
+      /* Calculation of nearest input values */
+      x0 = S->x1 + i * xSpacing;
+      x1 = S->x1 + (i + 1) * xSpacing;
+
+      /* Read of nearest output values */
+      y0 = pYData[i];
+      y1 = pYData[i + 1];
+
+      /* Calculation of output */
+      y = y0 + (x - x0) * ((y1 - y0) / (x1 - x0));
+
+    }
+
+    /* returns output value */
+    return (y);
+  }
+
+   /**
+   *
+   * @brief  Process function for the Q31 Linear Interpolation Function.
+   * @param[in] *pYData  pointer to Q31 Linear Interpolation table
+   * @param[in] x input sample to process
+   * @param[in] nValues number of table values
+   * @return y processed output sample.
+   *
+   * \par
+   * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+   * This function can support maximum of table size 2^12.
+   *
+   */
+
+
+  static __INLINE q31_t arm_linear_interp_q31(
+  q31_t * pYData,
+  q31_t x,
+  uint32_t nValues)
+  {
+    q31_t y;                                     /* output */
+    q31_t y0, y1;                                /* Nearest output values */
+    q31_t fract;                                 /* fractional part */
+    int32_t index;                               /* Index to read nearest output values */
+
+    /* Input is in 12.20 format */
+    /* 12 bits for the table index */
+    /* Index value calculation */
+    index = ((x & 0xFFF00000) >> 20);
+
+    if(index >= (int32_t)(nValues - 1))
+    {
+      return (pYData[nValues - 1]);
+    }
+    else if(index < 0)
+    {
+      return (pYData[0]);
+    }
+    else
+    {
+
+      /* 20 bits for the fractional part */
+      /* shift left by 11 to keep fract in 1.31 format */
+      fract = (x & 0x000FFFFF) << 11;
+
+      /* Read two nearest output values from the index in 1.31(q31) format */
+      y0 = pYData[index];
+      y1 = pYData[index + 1u];
+
+      /* Calculation of y0 * (1-fract) and y is in 2.30 format */
+      y = ((q31_t) ((q63_t) y0 * (0x7FFFFFFF - fract) >> 32));
+
+      /* Calculation of y0 * (1-fract) + y1 *fract and y is in 2.30 format */
+      y += ((q31_t) (((q63_t) y1 * fract) >> 32));
+
+      /* Convert y to 1.31 format */
+      return (y << 1u);
+
+    }
+
+  }
+
+  /**
+   *
+   * @brief  Process function for the Q15 Linear Interpolation Function.
+   * @param[in] *pYData  pointer to Q15 Linear Interpolation table
+   * @param[in] x input sample to process
+   * @param[in] nValues number of table values
+   * @return y processed output sample.
+   *
+   * \par
+   * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+   * This function can support maximum of table size 2^12.
+   *
+   */
+
+
+  static __INLINE q15_t arm_linear_interp_q15(
+  q15_t * pYData,
+  q31_t x,
+  uint32_t nValues)
+  {
+    q63_t y;                                     /* output */
+    q15_t y0, y1;                                /* Nearest output values */
+    q31_t fract;                                 /* fractional part */
+    int32_t index;                               /* Index to read nearest output values */
+
+    /* Input is in 12.20 format */
+    /* 12 bits for the table index */
+    /* Index value calculation */
+    index = ((x & 0xFFF00000) >> 20u);
+
+    if(index >= (int32_t)(nValues - 1))
+    {
+      return (pYData[nValues - 1]);
+    }
+    else if(index < 0)
+    {
+      return (pYData[0]);
+    }
+    else
+    {
+      /* 20 bits for the fractional part */
+      /* fract is in 12.20 format */
+      fract = (x & 0x000FFFFF);
+
+      /* Read two nearest output values from the index */
+      y0 = pYData[index];
+      y1 = pYData[index + 1u];
+
+      /* Calculation of y0 * (1-fract) and y is in 13.35 format */
+      y = ((q63_t) y0 * (0xFFFFF - fract));
+
+      /* Calculation of (y0 * (1-fract) + y1 * fract) and y is in 13.35 format */
+      y += ((q63_t) y1 * (fract));
+
+      /* convert y to 1.15 format */
+      return (y >> 20);
+    }
+
+
+  }
+
+  /**
+   *
+   * @brief  Process function for the Q7 Linear Interpolation Function.
+   * @param[in] *pYData  pointer to Q7 Linear Interpolation table
+   * @param[in] x input sample to process
+   * @param[in] nValues number of table values
+   * @return y processed output sample.
+   *
+   * \par
+   * Input sample <code>x</code> is in 12.20 format which contains 12 bits for table index and 20 bits for fractional part.
+   * This function can support maximum of table size 2^12.
+   */
+
+
+  static __INLINE q7_t arm_linear_interp_q7(
+  q7_t * pYData,
+  q31_t x,
+  uint32_t nValues)
+  {
+    q31_t y;                                     /* output */
+    q7_t y0, y1;                                 /* Nearest output values */
+    q31_t fract;                                 /* fractional part */
+    uint32_t index;                              /* Index to read nearest output values */
+
+    /* Input is in 12.20 format */
+    /* 12 bits for the table index */
+    /* Index value calculation */
+    if (x < 0)
+    {
+      return (pYData[0]);
+    }
+    index = (x >> 20) & 0xfff;
+
+
+    if(index >= (nValues - 1))
+    {
+      return (pYData[nValues - 1]);
+    }
+    else
+    {
+
+      /* 20 bits for the fractional part */
+      /* fract is in 12.20 format */
+      fract = (x & 0x000FFFFF);
+
+      /* Read two nearest output values from the index and are in 1.7(q7) format */
+      y0 = pYData[index];
+      y1 = pYData[index + 1u];
+
+      /* Calculation of y0 * (1-fract ) and y is in 13.27(q27) format */
+      y = ((y0 * (0xFFFFF - fract)));
+
+      /* Calculation of y1 * fract + y0 * (1-fract) and y is in 13.27(q27) format */
+      y += (y1 * fract);
+
+      /* convert y to 1.7(q7) format */
+      return (y >> 20u);
+
+    }
+
+  }
+  /**
+   * @} end of LinearInterpolate group
+   */
+
+  /**
+   * @brief  Fast approximation to the trigonometric sine function for floating-point data.
+   * @param[in] x input value in radians.
+   * @return  sin(x).
+   */
+
+  float32_t arm_sin_f32(
+  float32_t x);
+
+  /**
+   * @brief  Fast approximation to the trigonometric sine function for Q31 data.
+   * @param[in] x Scaled input value in radians.
+   * @return  sin(x).
+   */
+
+  q31_t arm_sin_q31(
+  q31_t x);
+
+  /**
+   * @brief  Fast approximation to the trigonometric sine function for Q15 data.
+   * @param[in] x Scaled input value in radians.
+   * @return  sin(x).
+   */
+
+  q15_t arm_sin_q15(
+  q15_t x);
+
+  /**
+   * @brief  Fast approximation to the trigonometric cosine function for floating-point data.
+   * @param[in] x input value in radians.
+   * @return  cos(x).
+   */
+
+  float32_t arm_cos_f32(
+  float32_t x);
+
+  /**
+   * @brief Fast approximation to the trigonometric cosine function for Q31 data.
+   * @param[in] x Scaled input value in radians.
+   * @return  cos(x).
+   */
+
+  q31_t arm_cos_q31(
+  q31_t x);
+
+  /**
+   * @brief  Fast approximation to the trigonometric cosine function for Q15 data.
+   * @param[in] x Scaled input value in radians.
+   * @return  cos(x).
+   */
+
+  q15_t arm_cos_q15(
+  q15_t x);
+
+
+  /**
+   * @ingroup groupFastMath
+   */
+
+
+  /**
+   * @defgroup SQRT Square Root
+   *
+   * Computes the square root of a number.
+   * There are separate functions for Q15, Q31, and floating-point data types.
+   * The square root function is computed using the Newton-Raphson algorithm.
+   * This is an iterative algorithm of the form:
+   * <pre>
+   *      x1 = x0 - f(x0)/f'(x0)
+   * </pre>
+   * where <code>x1</code> is the current estimate,
+   * <code>x0</code> is the previous estimate, and
+   * <code>f'(x0)</code> is the derivative of <code>f()</code> evaluated at <code>x0</code>.
+   * For the square root function, the algorithm reduces to:
+   * <pre>
+   *     x0 = in/2                         [initial guess]
+   *     x1 = 1/2 * ( x0 + in / x0)        [each iteration]
+   * </pre>
+   */
+
+
+  /**
+   * @addtogroup SQRT
+   * @{
+   */
+
+  /**
+   * @brief  Floating-point square root function.
+   * @param[in]  in     input value.
+   * @param[out] *pOut  square root of input value.
+   * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+   * <code>in</code> is negative value and returns zero output for negative values.
+   */
+
+  static __INLINE arm_status arm_sqrt_f32(
+  float32_t in,
+  float32_t * pOut)
+  {
+    if(in >= 0.0f)
+    {
+
+//      #if __FPU_USED
+#if (__FPU_USED == 1) && defined ( __CC_ARM   )
+      *pOut = __sqrtf(in);
+#else
+      *pOut = sqrtf(in);
+#endif
+
+      return (ARM_MATH_SUCCESS);
+    }
+    else
+    {
+      *pOut = 0.0f;
+      return (ARM_MATH_ARGUMENT_ERROR);
+    }
+
+  }
+
+
+  /**
+   * @brief Q31 square root function.
+   * @param[in]   in    input value.  The range of the input value is [0 +1) or 0x00000000 to 0x7FFFFFFF.
+   * @param[out]  *pOut square root of input value.
+   * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+   * <code>in</code> is negative value and returns zero output for negative values.
+   */
+  arm_status arm_sqrt_q31(
+  q31_t in,
+  q31_t * pOut);
+
+  /**
+   * @brief  Q15 square root function.
+   * @param[in]   in     input value.  The range of the input value is [0 +1) or 0x0000 to 0x7FFF.
+   * @param[out]  *pOut  square root of input value.
+   * @return The function returns ARM_MATH_SUCCESS if input value is positive value or ARM_MATH_ARGUMENT_ERROR if
+   * <code>in</code> is negative value and returns zero output for negative values.
+   */
+  arm_status arm_sqrt_q15(
+  q15_t in,
+  q15_t * pOut);
+
+  /**
+   * @} end of SQRT group
+   */
+
+
+
+
+
+
+  /**
+   * @brief floating-point Circular write function.
+   */
+
+  static __INLINE void arm_circularWrite_f32(
+  int32_t * circBuffer,
+  int32_t L,
+  uint16_t * writeOffset,
+  int32_t bufferInc,
+  const int32_t * src,
+  int32_t srcInc,
+  uint32_t blockSize)
+  {
+    uint32_t i = 0u;
+    int32_t wOffset;
+
+    /* Copy the value of Index pointer that points
+     * to the current location where the input samples to be copied */
+    wOffset = *writeOffset;
+
+    /* Loop over the blockSize */
+    i = blockSize;
+
+    while(i > 0u)
+    {
+      /* copy the input sample to the circular buffer */
+      circBuffer[wOffset] = *src;
+
+      /* Update the input pointer */
+      src += srcInc;
+
+      /* Circularly update wOffset.  Watch out for positive and negative value */
+      wOffset += bufferInc;
+      if(wOffset >= L)
+        wOffset -= L;
+
+      /* Decrement the loop counter */
+      i--;
+    }
+
+    /* Update the index pointer */
+    *writeOffset = wOffset;
+  }
+
+
+
+  /**
+   * @brief floating-point Circular Read function.
+   */
+  static __INLINE void arm_circularRead_f32(
+  int32_t * circBuffer,
+  int32_t L,
+  int32_t * readOffset,
+  int32_t bufferInc,
+  int32_t * dst,
+  int32_t * dst_base,
+  int32_t dst_length,
+  int32_t dstInc,
+  uint32_t blockSize)
+  {
+    uint32_t i = 0u;
+    int32_t rOffset, dst_end;
+
+    /* Copy the value of Index pointer that points
+     * to the current location from where the input samples to be read */
+    rOffset = *readOffset;
+    dst_end = (int32_t) (dst_base + dst_length);
+
+    /* Loop over the blockSize */
+    i = blockSize;
+
+    while(i > 0u)
+    {
+      /* copy the sample from the circular buffer to the destination buffer */
+      *dst = circBuffer[rOffset];
+
+      /* Update the input pointer */
+      dst += dstInc;
+
+      if(dst == (int32_t *) dst_end)
+      {
+        dst = dst_base;
+      }
+
+      /* Circularly update rOffset.  Watch out for positive and negative value  */
+      rOffset += bufferInc;
+
+      if(rOffset >= L)
+      {
+        rOffset -= L;
+      }
+
+      /* Decrement the loop counter */
+      i--;
+    }
+
+    /* Update the index pointer */
+    *readOffset = rOffset;
+  }
+
+  /**
+   * @brief Q15 Circular write function.
+   */
+
+  static __INLINE void arm_circularWrite_q15(
+  q15_t * circBuffer,
+  int32_t L,
+  uint16_t * writeOffset,
+  int32_t bufferInc,
+  const q15_t * src,
+  int32_t srcInc,
+  uint32_t blockSize)
+  {
+    uint32_t i = 0u;
+    int32_t wOffset;
+
+    /* Copy the value of Index pointer that points
+     * to the current location where the input samples to be copied */
+    wOffset = *writeOffset;
+
+    /* Loop over the blockSize */
+    i = blockSize;
+
+    while(i > 0u)
+    {
+      /* copy the input sample to the circular buffer */
+      circBuffer[wOffset] = *src;
+
+      /* Update the input pointer */
+      src += srcInc;
+
+      /* Circularly update wOffset.  Watch out for positive and negative value */
+      wOffset += bufferInc;
+      if(wOffset >= L)
+        wOffset -= L;
+
+      /* Decrement the loop counter */
+      i--;
+    }
+
+    /* Update the index pointer */
+    *writeOffset = wOffset;
+  }
+
+
+
+  /**
+   * @brief Q15 Circular Read function.
+   */
+  static __INLINE void arm_circularRead_q15(
+  q15_t * circBuffer,
+  int32_t L,
+  int32_t * readOffset,
+  int32_t bufferInc,
+  q15_t * dst,
+  q15_t * dst_base,
+  int32_t dst_length,
+  int32_t dstInc,
+  uint32_t blockSize)
+  {
+    uint32_t i = 0;
+    int32_t rOffset, dst_end;
+
+    /* Copy the value of Index pointer that points
+     * to the current location from where the input samples to be read */
+    rOffset = *readOffset;
+
+    dst_end = (int32_t) (dst_base + dst_length);
+
+    /* Loop over the blockSize */
+    i = blockSize;
+
+    while(i > 0u)
+    {
+      /* copy the sample from the circular buffer to the destination buffer */
+      *dst = circBuffer[rOffset];
+
+      /* Update the input pointer */
+      dst += dstInc;
+
+      if(dst == (q15_t *) dst_end)
+      {
+        dst = dst_base;
+      }
+
+      /* Circularly update wOffset.  Watch out for positive and negative value */
+      rOffset += bufferInc;
+
+      if(rOffset >= L)
+      {
+        rOffset -= L;
+      }
+
+      /* Decrement the loop counter */
+      i--;
+    }
+
+    /* Update the index pointer */
+    *readOffset = rOffset;
+  }
+
+
+  /**
+   * @brief Q7 Circular write function.
+   */
+
+  static __INLINE void arm_circularWrite_q7(
+  q7_t * circBuffer,
+  int32_t L,
+  uint16_t * writeOffset,
+  int32_t bufferInc,
+  const q7_t * src,
+  int32_t srcInc,
+  uint32_t blockSize)
+  {
+    uint32_t i = 0u;
+    int32_t wOffset;
+
+    /* Copy the value of Index pointer that points
+     * to the current location where the input samples to be copied */
+    wOffset = *writeOffset;
+
+    /* Loop over the blockSize */
+    i = blockSize;
+
+    while(i > 0u)
+    {
+      /* copy the input sample to the circular buffer */
+      circBuffer[wOffset] = *src;
+
+      /* Update the input pointer */
+      src += srcInc;
+
+      /* Circularly update wOffset.  Watch out for positive and negative value */
+      wOffset += bufferInc;
+      if(wOffset >= L)
+        wOffset -= L;
+
+      /* Decrement the loop counter */
+      i--;
+    }
+
+    /* Update the index pointer */
+    *writeOffset = wOffset;
+  }
+
+
+
+  /**
+   * @brief Q7 Circular Read function.
+   */
+  static __INLINE void arm_circularRead_q7(
+  q7_t * circBuffer,
+  int32_t L,
+  int32_t * readOffset,
+  int32_t bufferInc,
+  q7_t * dst,
+  q7_t * dst_base,
+  int32_t dst_length,
+  int32_t dstInc,
+  uint32_t blockSize)
+  {
+    uint32_t i = 0;
+    int32_t rOffset, dst_end;
+
+    /* Copy the value of Index pointer that points
+     * to the current location from where the input samples to be read */
+    rOffset = *readOffset;
+
+    dst_end = (int32_t) (dst_base + dst_length);
+
+    /* Loop over the blockSize */
+    i = blockSize;
+
+    while(i > 0u)
+    {
+      /* copy the sample from the circular buffer to the destination buffer */
+      *dst = circBuffer[rOffset];
+
+      /* Update the input pointer */
+      dst += dstInc;
+
+      if(dst == (q7_t *) dst_end)
+      {
+        dst = dst_base;
+      }
+
+      /* Circularly update rOffset.  Watch out for positive and negative value */
+      rOffset += bufferInc;
+
+      if(rOffset >= L)
+      {
+        rOffset -= L;
+      }
+
+      /* Decrement the loop counter */
+      i--;
+    }
+
+    /* Update the index pointer */
+    *readOffset = rOffset;
+  }
+
+
+  /**
+   * @brief  Sum of the squares of the elements of a Q31 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_power_q31(
+  q31_t * pSrc,
+  uint32_t blockSize,
+  q63_t * pResult);
+
+  /**
+   * @brief  Sum of the squares of the elements of a floating-point vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_power_f32(
+  float32_t * pSrc,
+  uint32_t blockSize,
+  float32_t * pResult);
+
+  /**
+   * @brief  Sum of the squares of the elements of a Q15 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_power_q15(
+  q15_t * pSrc,
+  uint32_t blockSize,
+  q63_t * pResult);
+
+  /**
+   * @brief  Sum of the squares of the elements of a Q7 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_power_q7(
+  q7_t * pSrc,
+  uint32_t blockSize,
+  q31_t * pResult);
+
+  /**
+   * @brief  Mean value of a Q7 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_mean_q7(
+  q7_t * pSrc,
+  uint32_t blockSize,
+  q7_t * pResult);
+
+  /**
+   * @brief  Mean value of a Q15 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+  void arm_mean_q15(
+  q15_t * pSrc,
+  uint32_t blockSize,
+  q15_t * pResult);
+
+  /**
+   * @brief  Mean value of a Q31 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+  void arm_mean_q31(
+  q31_t * pSrc,
+  uint32_t blockSize,
+  q31_t * pResult);
+
+  /**
+   * @brief  Mean value of a floating-point vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+  void arm_mean_f32(
+  float32_t * pSrc,
+  uint32_t blockSize,
+  float32_t * pResult);
+
+  /**
+   * @brief  Variance of the elements of a floating-point vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_var_f32(
+  float32_t * pSrc,
+  uint32_t blockSize,
+  float32_t * pResult);
+
+  /**
+   * @brief  Variance of the elements of a Q31 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_var_q31(
+  q31_t * pSrc,
+  uint32_t blockSize,
+  q31_t * pResult);
+
+  /**
+   * @brief  Variance of the elements of a Q15 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_var_q15(
+  q15_t * pSrc,
+  uint32_t blockSize,
+  q15_t * pResult);
+
+  /**
+   * @brief  Root Mean Square of the elements of a floating-point vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_rms_f32(
+  float32_t * pSrc,
+  uint32_t blockSize,
+  float32_t * pResult);
+
+  /**
+   * @brief  Root Mean Square of the elements of a Q31 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_rms_q31(
+  q31_t * pSrc,
+  uint32_t blockSize,
+  q31_t * pResult);
+
+  /**
+   * @brief  Root Mean Square of the elements of a Q15 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_rms_q15(
+  q15_t * pSrc,
+  uint32_t blockSize,
+  q15_t * pResult);
+
+  /**
+   * @brief  Standard deviation of the elements of a floating-point vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_std_f32(
+  float32_t * pSrc,
+  uint32_t blockSize,
+  float32_t * pResult);
+
+  /**
+   * @brief  Standard deviation of the elements of a Q31 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_std_q31(
+  q31_t * pSrc,
+  uint32_t blockSize,
+  q31_t * pResult);
+
+  /**
+   * @brief  Standard deviation of the elements of a Q15 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output value.
+   * @return none.
+   */
+
+  void arm_std_q15(
+  q15_t * pSrc,
+  uint32_t blockSize,
+  q15_t * pResult);
+
+  /**
+   * @brief  Floating-point complex magnitude
+   * @param[in]  *pSrc points to the complex input vector
+   * @param[out]  *pDst points to the real output vector
+   * @param[in]  numSamples number of complex samples in the input vector
+   * @return none.
+   */
+
+  void arm_cmplx_mag_f32(
+  float32_t * pSrc,
+  float32_t * pDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief  Q31 complex magnitude
+   * @param[in]  *pSrc points to the complex input vector
+   * @param[out]  *pDst points to the real output vector
+   * @param[in]  numSamples number of complex samples in the input vector
+   * @return none.
+   */
+
+  void arm_cmplx_mag_q31(
+  q31_t * pSrc,
+  q31_t * pDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief  Q15 complex magnitude
+   * @param[in]  *pSrc points to the complex input vector
+   * @param[out]  *pDst points to the real output vector
+   * @param[in]  numSamples number of complex samples in the input vector
+   * @return none.
+   */
+
+  void arm_cmplx_mag_q15(
+  q15_t * pSrc,
+  q15_t * pDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief  Q15 complex dot product
+   * @param[in]  *pSrcA points to the first input vector
+   * @param[in]  *pSrcB points to the second input vector
+   * @param[in]  numSamples number of complex samples in each vector
+   * @param[out]  *realResult real part of the result returned here
+   * @param[out]  *imagResult imaginary part of the result returned here
+   * @return none.
+   */
+
+  void arm_cmplx_dot_prod_q15(
+  q15_t * pSrcA,
+  q15_t * pSrcB,
+  uint32_t numSamples,
+  q31_t * realResult,
+  q31_t * imagResult);
+
+  /**
+   * @brief  Q31 complex dot product
+   * @param[in]  *pSrcA points to the first input vector
+   * @param[in]  *pSrcB points to the second input vector
+   * @param[in]  numSamples number of complex samples in each vector
+   * @param[out]  *realResult real part of the result returned here
+   * @param[out]  *imagResult imaginary part of the result returned here
+   * @return none.
+   */
+
+  void arm_cmplx_dot_prod_q31(
+  q31_t * pSrcA,
+  q31_t * pSrcB,
+  uint32_t numSamples,
+  q63_t * realResult,
+  q63_t * imagResult);
+
+  /**
+   * @brief  Floating-point complex dot product
+   * @param[in]  *pSrcA points to the first input vector
+   * @param[in]  *pSrcB points to the second input vector
+   * @param[in]  numSamples number of complex samples in each vector
+   * @param[out]  *realResult real part of the result returned here
+   * @param[out]  *imagResult imaginary part of the result returned here
+   * @return none.
+   */
+
+  void arm_cmplx_dot_prod_f32(
+  float32_t * pSrcA,
+  float32_t * pSrcB,
+  uint32_t numSamples,
+  float32_t * realResult,
+  float32_t * imagResult);
+
+  /**
+   * @brief  Q15 complex-by-real multiplication
+   * @param[in]  *pSrcCmplx points to the complex input vector
+   * @param[in]  *pSrcReal points to the real input vector
+   * @param[out]  *pCmplxDst points to the complex output vector
+   * @param[in]  numSamples number of samples in each vector
+   * @return none.
+   */
+
+  void arm_cmplx_mult_real_q15(
+  q15_t * pSrcCmplx,
+  q15_t * pSrcReal,
+  q15_t * pCmplxDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief  Q31 complex-by-real multiplication
+   * @param[in]  *pSrcCmplx points to the complex input vector
+   * @param[in]  *pSrcReal points to the real input vector
+   * @param[out]  *pCmplxDst points to the complex output vector
+   * @param[in]  numSamples number of samples in each vector
+   * @return none.
+   */
+
+  void arm_cmplx_mult_real_q31(
+  q31_t * pSrcCmplx,
+  q31_t * pSrcReal,
+  q31_t * pCmplxDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief  Floating-point complex-by-real multiplication
+   * @param[in]  *pSrcCmplx points to the complex input vector
+   * @param[in]  *pSrcReal points to the real input vector
+   * @param[out]  *pCmplxDst points to the complex output vector
+   * @param[in]  numSamples number of samples in each vector
+   * @return none.
+   */
+
+  void arm_cmplx_mult_real_f32(
+  float32_t * pSrcCmplx,
+  float32_t * pSrcReal,
+  float32_t * pCmplxDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief  Minimum value of a Q7 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *result is output pointer
+   * @param[in]  index is the array index of the minimum value in the input buffer.
+   * @return none.
+   */
+
+  void arm_min_q7(
+  q7_t * pSrc,
+  uint32_t blockSize,
+  q7_t * result,
+  uint32_t * index);
+
+  /**
+   * @brief  Minimum value of a Q15 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output pointer
+   * @param[in]  *pIndex is the array index of the minimum value in the input buffer.
+   * @return none.
+   */
+
+  void arm_min_q15(
+  q15_t * pSrc,
+  uint32_t blockSize,
+  q15_t * pResult,
+  uint32_t * pIndex);
+
+  /**
+   * @brief  Minimum value of a Q31 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output pointer
+   * @param[out]  *pIndex is the array index of the minimum value in the input buffer.
+   * @return none.
+   */
+  void arm_min_q31(
+  q31_t * pSrc,
+  uint32_t blockSize,
+  q31_t * pResult,
+  uint32_t * pIndex);
+
+  /**
+   * @brief  Minimum value of a floating-point vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @param[out]  *pResult is output pointer
+   * @param[out]  *pIndex is the array index of the minimum value in the input buffer.
+   * @return none.
+   */
+
+  void arm_min_f32(
+  float32_t * pSrc,
+  uint32_t blockSize,
+  float32_t * pResult,
+  uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a Q7 vector.
+ * @param[in]       *pSrc points to the input buffer
+ * @param[in]       blockSize length of the input vector
+ * @param[out]      *pResult maximum value returned here
+ * @param[out]      *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+  void arm_max_q7(
+  q7_t * pSrc,
+  uint32_t blockSize,
+  q7_t * pResult,
+  uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a Q15 vector.
+ * @param[in]       *pSrc points to the input buffer
+ * @param[in]       blockSize length of the input vector
+ * @param[out]      *pResult maximum value returned here
+ * @param[out]      *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+  void arm_max_q15(
+  q15_t * pSrc,
+  uint32_t blockSize,
+  q15_t * pResult,
+  uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a Q31 vector.
+ * @param[in]       *pSrc points to the input buffer
+ * @param[in]       blockSize length of the input vector
+ * @param[out]      *pResult maximum value returned here
+ * @param[out]      *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+  void arm_max_q31(
+  q31_t * pSrc,
+  uint32_t blockSize,
+  q31_t * pResult,
+  uint32_t * pIndex);
+
+/**
+ * @brief Maximum value of a floating-point vector.
+ * @param[in]       *pSrc points to the input buffer
+ * @param[in]       blockSize length of the input vector
+ * @param[out]      *pResult maximum value returned here
+ * @param[out]      *pIndex index of maximum value returned here
+ * @return none.
+ */
+
+  void arm_max_f32(
+  float32_t * pSrc,
+  uint32_t blockSize,
+  float32_t * pResult,
+  uint32_t * pIndex);
+
+  /**
+   * @brief  Q15 complex-by-complex multiplication
+   * @param[in]  *pSrcA points to the first input vector
+   * @param[in]  *pSrcB points to the second input vector
+   * @param[out]  *pDst  points to the output vector
+   * @param[in]  numSamples number of complex samples in each vector
+   * @return none.
+   */
+
+  void arm_cmplx_mult_cmplx_q15(
+  q15_t * pSrcA,
+  q15_t * pSrcB,
+  q15_t * pDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief  Q31 complex-by-complex multiplication
+   * @param[in]  *pSrcA points to the first input vector
+   * @param[in]  *pSrcB points to the second input vector
+   * @param[out]  *pDst  points to the output vector
+   * @param[in]  numSamples number of complex samples in each vector
+   * @return none.
+   */
+
+  void arm_cmplx_mult_cmplx_q31(
+  q31_t * pSrcA,
+  q31_t * pSrcB,
+  q31_t * pDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief  Floating-point complex-by-complex multiplication
+   * @param[in]  *pSrcA points to the first input vector
+   * @param[in]  *pSrcB points to the second input vector
+   * @param[out]  *pDst  points to the output vector
+   * @param[in]  numSamples number of complex samples in each vector
+   * @return none.
+   */
+
+  void arm_cmplx_mult_cmplx_f32(
+  float32_t * pSrcA,
+  float32_t * pSrcB,
+  float32_t * pDst,
+  uint32_t numSamples);
+
+  /**
+   * @brief Converts the elements of the floating-point vector to Q31 vector.
+   * @param[in]       *pSrc points to the floating-point input vector
+   * @param[out]      *pDst points to the Q31 output vector
+   * @param[in]       blockSize length of the input vector
+   * @return none.
+   */
+  void arm_float_to_q31(
+  float32_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Converts the elements of the floating-point vector to Q15 vector.
+   * @param[in]       *pSrc points to the floating-point input vector
+   * @param[out]      *pDst points to the Q15 output vector
+   * @param[in]       blockSize length of the input vector
+   * @return          none
+   */
+  void arm_float_to_q15(
+  float32_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief Converts the elements of the floating-point vector to Q7 vector.
+   * @param[in]       *pSrc points to the floating-point input vector
+   * @param[out]      *pDst points to the Q7 output vector
+   * @param[in]       blockSize length of the input vector
+   * @return          none
+   */
+  void arm_float_to_q7(
+  float32_t * pSrc,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief  Converts the elements of the Q31 vector to Q15 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[out]  *pDst is output pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @return none.
+   */
+  void arm_q31_to_q15(
+  q31_t * pSrc,
+  q15_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Converts the elements of the Q31 vector to Q7 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[out]  *pDst is output pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @return none.
+   */
+  void arm_q31_to_q7(
+  q31_t * pSrc,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+  /**
+   * @brief  Converts the elements of the Q15 vector to floating-point vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[out]  *pDst is output pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @return none.
+   */
+  void arm_q15_to_float(
+  q15_t * pSrc,
+  float32_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief  Converts the elements of the Q15 vector to Q31 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[out]  *pDst is output pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @return none.
+   */
+  void arm_q15_to_q31(
+  q15_t * pSrc,
+  q31_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @brief  Converts the elements of the Q15 vector to Q7 vector.
+   * @param[in]  *pSrc is input pointer
+   * @param[out]  *pDst is output pointer
+   * @param[in]  blockSize is the number of samples to process
+   * @return none.
+   */
+  void arm_q15_to_q7(
+  q15_t * pSrc,
+  q7_t * pDst,
+  uint32_t blockSize);
+
+
+  /**
+   * @ingroup groupInterpolation
+   */
+
+  /**
+   * @defgroup BilinearInterpolate Bilinear Interpolation
+   *
+   * Bilinear interpolation is an extension of linear interpolation applied to a two dimensional grid.
+   * The underlying function <code>f(x, y)</code> is sampled on a regular grid and the interpolation process
+   * determines values between the grid points.
+   * Bilinear interpolation is equivalent to two step linear interpolation, first in the x-dimension and then in the y-dimension.
+   * Bilinear interpolation is often used in image processing to rescale images.
+   * The CMSIS DSP library provides bilinear interpolation functions for Q7, Q15, Q31, and floating-point data types.
+   *
+   * <b>Algorithm</b>
+   * \par
+   * The instance structure used by the bilinear interpolation functions describes a two dimensional data table.
+   * For floating-point, the instance structure is defined as:
+   * <pre>
+   *   typedef struct
+   *   {
+   *     uint16_t numRows;
+   *     uint16_t numCols;
+   *     float32_t *pData;
+   * } arm_bilinear_interp_instance_f32;
+   * </pre>
+   *
+   * \par
+   * where <code>numRows</code> specifies the number of rows in the table;
+   * <code>numCols</code> specifies the number of columns in the table;
+   * and <code>pData</code> points to an array of size <code>numRows*numCols</code> values.
+   * The data table <code>pTable</code> is organized in row order and the supplied data values fall on integer indexes.
+   * That is, table element (x,y) is located at <code>pTable[x + y*numCols]</code> where x and y are integers.
+   *
+   * \par
+   * Let <code>(x, y)</code> specify the desired interpolation point.  Then define:
+   * <pre>
+   *     XF = floor(x)
+   *     YF = floor(y)
+   * </pre>
+   * \par
+   * The interpolated output point is computed as:
+   * <pre>
+   *  f(x, y) = f(XF, YF) * (1-(x-XF)) * (1-(y-YF))
+   *           + f(XF+1, YF) * (x-XF)*(1-(y-YF))
+   *           + f(XF, YF+1) * (1-(x-XF))*(y-YF)
+   *           + f(XF+1, YF+1) * (x-XF)*(y-YF)
+   * </pre>
+   * Note that the coordinates (x, y) contain integer and fractional components.
+   * The integer components specify which portion of the table to use while the
+   * fractional components control the interpolation processor.
+   *
+   * \par
+   * if (x,y) are outside of the table boundary, Bilinear interpolation returns zero output.
+   */
+
+  /**
+   * @addtogroup BilinearInterpolate
+   * @{
+   */
+
+  /**
+  *
+  * @brief  Floating-point bilinear interpolation.
+  * @param[in,out] *S points to an instance of the interpolation structure.
+  * @param[in] X interpolation coordinate.
+  * @param[in] Y interpolation coordinate.
+  * @return out interpolated value.
+  */
+
+
+  static __INLINE float32_t arm_bilinear_interp_f32(
+  const arm_bilinear_interp_instance_f32 * S,
+  float32_t X,
+  float32_t Y)
+  {
+    float32_t out;
+    float32_t f00, f01, f10, f11;
+    float32_t *pData = S->pData;
+    int32_t xIndex, yIndex, index;
+    float32_t xdiff, ydiff;
+    float32_t b1, b2, b3, b4;
+
+    xIndex = (int32_t) X;
+    yIndex = (int32_t) Y;
+
+    /* Care taken for table outside boundary */
+    /* Returns zero output when values are outside table boundary */
+    if(xIndex < 0 || xIndex > (S->numRows - 1) || yIndex < 0
+       || yIndex > (S->numCols - 1))
+    {
+      return (0);
+    }
+
+    /* Calculation of index for two nearest points in X-direction */
+    index = (xIndex - 1) + (yIndex - 1) * S->numCols;
+
+
+    /* Read two nearest points in X-direction */
+    f00 = pData[index];
+    f01 = pData[index + 1];
+
+    /* Calculation of index for two nearest points in Y-direction */
+    index = (xIndex - 1) + (yIndex) * S->numCols;
+
+
+    /* Read two nearest points in Y-direction */
+    f10 = pData[index];
+    f11 = pData[index + 1];
+
+    /* Calculation of intermediate values */
+    b1 = f00;
+    b2 = f01 - f00;
+    b3 = f10 - f00;
+    b4 = f00 - f01 - f10 + f11;
+
+    /* Calculation of fractional part in X */
+    xdiff = X - xIndex;
+
+    /* Calculation of fractional part in Y */
+    ydiff = Y - yIndex;
+
+    /* Calculation of bi-linear interpolated output */
+    out = b1 + b2 * xdiff + b3 * ydiff + b4 * xdiff * ydiff;
+
+    /* return to application */
+    return (out);
+
+  }
+
+  /**
+  *
+  * @brief  Q31 bilinear interpolation.
+  * @param[in,out] *S points to an instance of the interpolation structure.
+  * @param[in] X interpolation coordinate in 12.20 format.
+  * @param[in] Y interpolation coordinate in 12.20 format.
+  * @return out interpolated value.
+  */
+
+  static __INLINE q31_t arm_bilinear_interp_q31(
+  arm_bilinear_interp_instance_q31 * S,
+  q31_t X,
+  q31_t Y)
+  {
+    q31_t out;                                   /* Temporary output */
+    q31_t acc = 0;                               /* output */
+    q31_t xfract, yfract;                        /* X, Y fractional parts */
+    q31_t x1, x2, y1, y2;                        /* Nearest output values */
+    int32_t rI, cI;                              /* Row and column indices */
+    q31_t *pYData = S->pData;                    /* pointer to output table values */
+    uint32_t nCols = S->numCols;                 /* num of rows */
+
+
+    /* Input is in 12.20 format */
+    /* 12 bits for the table index */
+    /* Index value calculation */
+    rI = ((X & 0xFFF00000) >> 20u);
+
+    /* Input is in 12.20 format */
+    /* 12 bits for the table index */
+    /* Index value calculation */
+    cI = ((Y & 0xFFF00000) >> 20u);
+
+    /* Care taken for table outside boundary */
+    /* Returns zero output when values are outside table boundary */
+    if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+    {
+      return (0);
+    }
+
+    /* 20 bits for the fractional part */
+    /* shift left xfract by 11 to keep 1.31 format */
+    xfract = (X & 0x000FFFFF) << 11u;
+
+    /* Read two nearest output values from the index */
+    x1 = pYData[(rI) + nCols * (cI)];
+    x2 = pYData[(rI) + nCols * (cI) + 1u];
+
+    /* 20 bits for the fractional part */
+    /* shift left yfract by 11 to keep 1.31 format */
+    yfract = (Y & 0x000FFFFF) << 11u;
+
+    /* Read two nearest output values from the index */
+    y1 = pYData[(rI) + nCols * (cI + 1)];
+    y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
+
+    /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 3.29(q29) format */
+    out = ((q31_t) (((q63_t) x1 * (0x7FFFFFFF - xfract)) >> 32));
+    acc = ((q31_t) (((q63_t) out * (0x7FFFFFFF - yfract)) >> 32));
+
+    /* x2 * (xfract) * (1-yfract)  in 3.29(q29) and adding to acc */
+    out = ((q31_t) ((q63_t) x2 * (0x7FFFFFFF - yfract) >> 32));
+    acc += ((q31_t) ((q63_t) out * (xfract) >> 32));
+
+    /* y1 * (1 - xfract) * (yfract)  in 3.29(q29) and adding to acc */
+    out = ((q31_t) ((q63_t) y1 * (0x7FFFFFFF - xfract) >> 32));
+    acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+    /* y2 * (xfract) * (yfract)  in 3.29(q29) and adding to acc */
+    out = ((q31_t) ((q63_t) y2 * (xfract) >> 32));
+    acc += ((q31_t) ((q63_t) out * (yfract) >> 32));
+
+    /* Convert acc to 1.31(q31) format */
+    return (acc << 2u);
+
+  }
+
+  /**
+  * @brief  Q15 bilinear interpolation.
+  * @param[in,out] *S points to an instance of the interpolation structure.
+  * @param[in] X interpolation coordinate in 12.20 format.
+  * @param[in] Y interpolation coordinate in 12.20 format.
+  * @return out interpolated value.
+  */
+
+  static __INLINE q15_t arm_bilinear_interp_q15(
+  arm_bilinear_interp_instance_q15 * S,
+  q31_t X,
+  q31_t Y)
+  {
+    q63_t acc = 0;                               /* output */
+    q31_t out;                                   /* Temporary output */
+    q15_t x1, x2, y1, y2;                        /* Nearest output values */
+    q31_t xfract, yfract;                        /* X, Y fractional parts */
+    int32_t rI, cI;                              /* Row and column indices */
+    q15_t *pYData = S->pData;                    /* pointer to output table values */
+    uint32_t nCols = S->numCols;                 /* num of rows */
+
+    /* Input is in 12.20 format */
+    /* 12 bits for the table index */
+    /* Index value calculation */
+    rI = ((X & 0xFFF00000) >> 20);
+
+    /* Input is in 12.20 format */
+    /* 12 bits for the table index */
+    /* Index value calculation */
+    cI = ((Y & 0xFFF00000) >> 20);
+
+    /* Care taken for table outside boundary */
+    /* Returns zero output when values are outside table boundary */
+    if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+    {
+      return (0);
+    }
+
+    /* 20 bits for the fractional part */
+    /* xfract should be in 12.20 format */
+    xfract = (X & 0x000FFFFF);
+
+    /* Read two nearest output values from the index */
+    x1 = pYData[(rI) + nCols * (cI)];
+    x2 = pYData[(rI) + nCols * (cI) + 1u];
+
+
+    /* 20 bits for the fractional part */
+    /* yfract should be in 12.20 format */
+    yfract = (Y & 0x000FFFFF);
+
+    /* Read two nearest output values from the index */
+    y1 = pYData[(rI) + nCols * (cI + 1)];
+    y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
+
+    /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 13.51 format */
+
+    /* x1 is in 1.15(q15), xfract in 12.20 format and out is in 13.35 format */
+    /* convert 13.35 to 13.31 by right shifting  and out is in 1.31 */
+    out = (q31_t) (((q63_t) x1 * (0xFFFFF - xfract)) >> 4u);
+    acc = ((q63_t) out * (0xFFFFF - yfract));
+
+    /* x2 * (xfract) * (1-yfract)  in 1.51 and adding to acc */
+    out = (q31_t) (((q63_t) x2 * (0xFFFFF - yfract)) >> 4u);
+    acc += ((q63_t) out * (xfract));
+
+    /* y1 * (1 - xfract) * (yfract)  in 1.51 and adding to acc */
+    out = (q31_t) (((q63_t) y1 * (0xFFFFF - xfract)) >> 4u);
+    acc += ((q63_t) out * (yfract));
+
+    /* y2 * (xfract) * (yfract)  in 1.51 and adding to acc */
+    out = (q31_t) (((q63_t) y2 * (xfract)) >> 4u);
+    acc += ((q63_t) out * (yfract));
+
+    /* acc is in 13.51 format and down shift acc by 36 times */
+    /* Convert out to 1.15 format */
+    return (acc >> 36);
+
+  }
+
+  /**
+  * @brief  Q7 bilinear interpolation.
+  * @param[in,out] *S points to an instance of the interpolation structure.
+  * @param[in] X interpolation coordinate in 12.20 format.
+  * @param[in] Y interpolation coordinate in 12.20 format.
+  * @return out interpolated value.
+  */
+
+  static __INLINE q7_t arm_bilinear_interp_q7(
+  arm_bilinear_interp_instance_q7 * S,
+  q31_t X,
+  q31_t Y)
+  {
+    q63_t acc = 0;                               /* output */
+    q31_t out;                                   /* Temporary output */
+    q31_t xfract, yfract;                        /* X, Y fractional parts */
+    q7_t x1, x2, y1, y2;                         /* Nearest output values */
+    int32_t rI, cI;                              /* Row and column indices */
+    q7_t *pYData = S->pData;                     /* pointer to output table values */
+    uint32_t nCols = S->numCols;                 /* num of rows */
+
+    /* Input is in 12.20 format */
+    /* 12 bits for the table index */
+    /* Index value calculation */
+    rI = ((X & 0xFFF00000) >> 20);
+
+    /* Input is in 12.20 format */
+    /* 12 bits for the table index */
+    /* Index value calculation */
+    cI = ((Y & 0xFFF00000) >> 20);
+
+    /* Care taken for table outside boundary */
+    /* Returns zero output when values are outside table boundary */
+    if(rI < 0 || rI > (S->numRows - 1) || cI < 0 || cI > (S->numCols - 1))
+    {
+      return (0);
+    }
+
+    /* 20 bits for the fractional part */
+    /* xfract should be in 12.20 format */
+    xfract = (X & 0x000FFFFF);
+
+    /* Read two nearest output values from the index */
+    x1 = pYData[(rI) + nCols * (cI)];
+    x2 = pYData[(rI) + nCols * (cI) + 1u];
+
+
+    /* 20 bits for the fractional part */
+    /* yfract should be in 12.20 format */
+    yfract = (Y & 0x000FFFFF);
+
+    /* Read two nearest output values from the index */
+    y1 = pYData[(rI) + nCols * (cI + 1)];
+    y2 = pYData[(rI) + nCols * (cI + 1) + 1u];
+
+    /* Calculation of x1 * (1-xfract ) * (1-yfract) and acc is in 16.47 format */
+    out = ((x1 * (0xFFFFF - xfract)));
+    acc = (((q63_t) out * (0xFFFFF - yfract)));
+
+    /* x2 * (xfract) * (1-yfract)  in 2.22 and adding to acc */
+    out = ((x2 * (0xFFFFF - yfract)));
+    acc += (((q63_t) out * (xfract)));
+
+    /* y1 * (1 - xfract) * (yfract)  in 2.22 and adding to acc */
+    out = ((y1 * (0xFFFFF - xfract)));
+    acc += (((q63_t) out * (yfract)));
+
+    /* y2 * (xfract) * (yfract)  in 2.22 and adding to acc */
+    out = ((y2 * (yfract)));
+    acc += (((q63_t) out * (xfract)));
+
+    /* acc in 16.47 format and down shift by 40 to convert to 1.7 format */
+    return (acc >> 40);
+
+  }
+
+  /**
+   * @} end of BilinearInterpolate group
+   */
+   
+
+//SMMLAR
+#define multAcc_32x32_keep32_R(a, x, y) \
+    a = (q31_t) (((((q63_t) a) << 32) + ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+//SMMLSR
+#define multSub_32x32_keep32_R(a, x, y) \
+    a = (q31_t) (((((q63_t) a) << 32) - ((q63_t) x * y) + 0x80000000LL ) >> 32)
+
+//SMMULR
+#define mult_32x32_keep32_R(a, x, y) \
+    a = (q31_t) (((q63_t) x * y + 0x80000000LL ) >> 32)
+
+//SMMLA
+#define multAcc_32x32_keep32(a, x, y) \
+    a += (q31_t) (((q63_t) x * y) >> 32)
+
+//SMMLS
+#define multSub_32x32_keep32(a, x, y) \
+    a -= (q31_t) (((q63_t) x * y) >> 32)
+
+//SMMUL
+#define mult_32x32_keep32(a, x, y) \
+    a = (q31_t) (((q63_t) x * y ) >> 32)
+
+
+#if defined ( __CC_ARM ) //Keil
+
+//Enter low optimization region - place directly above function definition
+    #ifdef ARM_MATH_CM4
+      #define LOW_OPTIMIZATION_ENTER \
+         _Pragma ("push")         \
+         _Pragma ("O1")
+    #else
+      #define LOW_OPTIMIZATION_ENTER 
+    #endif
+
+//Exit low optimization region - place directly after end of function definition
+    #ifdef ARM_MATH_CM4
+      #define LOW_OPTIMIZATION_EXIT \
+         _Pragma ("pop")
+    #else
+      #define LOW_OPTIMIZATION_EXIT  
+    #endif
+
+//Enter low optimization region - place directly above function definition
+  #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+
+//Exit low optimization region - place directly after end of function definition
+  #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__ICCARM__) //IAR
+
+//Enter low optimization region - place directly above function definition
+    #ifdef ARM_MATH_CM4
+      #define LOW_OPTIMIZATION_ENTER \
+         _Pragma ("optimize=low")
+    #else
+      #define LOW_OPTIMIZATION_ENTER   
+    #endif
+
+//Exit low optimization region - place directly after end of function definition
+  #define LOW_OPTIMIZATION_EXIT
+
+//Enter low optimization region - place directly above function definition
+    #ifdef ARM_MATH_CM4
+      #define IAR_ONLY_LOW_OPTIMIZATION_ENTER \
+         _Pragma ("optimize=low")
+    #else
+      #define IAR_ONLY_LOW_OPTIMIZATION_ENTER   
+    #endif
+
+//Exit low optimization region - place directly after end of function definition
+  #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__GNUC__)
+
+  #define LOW_OPTIMIZATION_ENTER __attribute__(( optimize("-O1") ))
+
+  #define LOW_OPTIMIZATION_EXIT
+
+  #define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+
+  #define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__CSMC__)		// Cosmic
+
+#define LOW_OPTIMIZATION_ENTER
+#define LOW_OPTIMIZATION_EXIT
+#define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+#define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#elif defined(__TASKING__)		// TASKING
+
+#define LOW_OPTIMIZATION_ENTER
+#define LOW_OPTIMIZATION_EXIT
+#define IAR_ONLY_LOW_OPTIMIZATION_ENTER
+#define IAR_ONLY_LOW_OPTIMIZATION_EXIT
+
+#endif
+
+
+#ifdef	__cplusplus
+}
+#endif
+
+
+#endif /* _ARM_MATH_H */
+
+/**
+ *
+ * End of file.
+ */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_ca9.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,276 @@
+/**************************************************************************//**
+ * @file     core_ca9.h
+ * @brief    CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date     25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+  @{
+ */
+
+/*  CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN  (0x03)                                   /*!< [31:16] CMSIS HAL main version   */
+#define __CA9_CMSIS_VERSION_SUB   (0x10)                                   /*!< [15:0]  CMSIS HAL sub version    */
+#define __CA9_CMSIS_VERSION       ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+                                    __CA9_CMSIS_VERSION_SUB          )     /*!< CMSIS HAL version number         */
+
+#define __CORTEX_A                (0x09)                                   /*!< Cortex-A Core                    */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+  #define __STATIC_INLINE  static __inline
+  #define __STATIC_ASM     static __asm
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+  #define __STATIC_ASM     static __asm
+
+#include <stdint.h>
+inline uint32_t __get_PSR(void) {
+	__ASM("mrs r0, cpsr");
+}
+
+#elif defined ( __TMS470__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler       */
+  #define __STATIC_INLINE  static inline
+  #define __STATIC_ASM     static __asm
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+  #define __STATIC_INLINE  static inline
+  #define __STATIC_ASM     static __asm
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+  #define __STATIC_INLINE  static inline
+  #define __STATIC_ASM     static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __TMS470__ )
+  #if defined __TI_VFP_SUPPORT__
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+#endif
+
+#include <stdint.h>                      /*!< standard types definitions                      */
+#include "core_caInstr.h"                /*!< Core Instruction Access                         */
+#include "core_caFunc.h"                 /*!< Core Function Access                            */
+#include "core_cm4_simd.h"               /*!< Compiler specific SIMD Intrinsics               */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CA9_REV
+    #define __CA9_REV               0x0000
+    #warning "__CA9_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             1
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    1
+  #endif
+
+  #if __Vendor_SysTickConfig == 0
+    #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+    \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_CORE  Status and Control Registers
+    \brief  Core Register type definitions.
+  @{
+ */
+
+/** \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t reserved1:7;                /*!< bit: 20..23  Reserved                           */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */ 
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_caFunc.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1427 @@
+/**************************************************************************//**
+ * @file     core_caFunc.h
+ * @brief    CMSIS Cortex-A Core Function Access Header File
+ * @version  V3.10
+ * @date     30 Oct 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+ */
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+  #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief  Get APSR Register
+
+    This function returns the content of the APSR Register.
+
+    \return               APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+  register uint32_t __regAPSR          __ASM("apsr");
+  return(__regAPSR);
+}
+
+
+/** \brief  Get CPSR Register
+
+    This function returns the content of the CPSR Register.
+
+    \return               CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+  register uint32_t __regCPSR          __ASM("cpsr");
+  return(__regCPSR);
+}
+
+/** \brief  Set Stack Pointer
+
+    This function assigns the given value to the current stack pointer.
+
+    \param [in]    topOfStack  Stack Pointer value to set
+ */
+register uint32_t __regSP              __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+    __regSP = topOfStack;
+}
+
+
+/** \brief  Get link register
+
+    This function returns the value of the link register
+
+    \return    Value of link register
+ */
+register uint32_t __reglr         __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+  return(__reglr);
+}
+
+/** \brief  Set link register
+
+    This function sets the value of the link register
+
+    \param [in]    lr  LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+  __reglr = lr;
+}
+
+/** \brief  Set Process Stack Pointer
+
+    This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+    \param [in]    topOfProcStack  USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+    ARM
+    PRESERVE8
+
+    BIC     R0, R0, #7  ;ensure stack is 8-byte aligned
+    MRS     R1, CPSR
+    CPS     #MODE_SYS   ;no effect in USR mode
+    MOV     SP, R0
+    MSR     CPSR_c, R1  ;no effect in USR mode
+    ISB
+    BX      LR
+
+}
+
+/** \brief  Set User Mode
+
+    This function changes the processor state to User Mode
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+    ARM 
+
+    CPS  #MODE_USR  
+    BX   LR
+}
+
+
+/** \brief  Enable FIQ
+
+    This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq                __enable_fiq
+
+
+/** \brief  Disable FIQ
+
+    This function disables FIQ interrupts by setting the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq               __disable_fiq
+
+
+/** \brief  Get FPSCR
+
+    This function returns the current value of the Floating Point Status/Control register.
+
+    \return               Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  register uint32_t __regfpscr         __ASM("fpscr");
+  return(__regfpscr);
+#else
+   return(0);
+#endif
+}
+
+
+/** \brief  Set FPSCR
+
+    This function assigns the given value to the Floating Point Status/Control register.
+
+    \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  register uint32_t __regfpscr         __ASM("fpscr");
+  __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief  Get FPEXC
+
+    This function returns the current value of the Floating Point Exception Control register.
+
+    \return               Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+  register uint32_t __regfpexc         __ASM("fpexc");
+  return(__regfpexc);
+#else
+   return(0);
+#endif
+}
+
+
+/** \brief  Set FPEXC
+
+    This function assigns the given value to the Floating Point Exception Control register.
+
+    \param [in]    fpscr  Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+  register uint32_t __regfpexc         __ASM("fpexc");
+  __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief  Get CPACR
+
+    This function returns the current value of the Coprocessor Access Control register.
+
+    \return               Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+    register uint32_t __regCPACR         __ASM("cp15:0:c1:c0:2");
+    return __regCPACR;
+}
+
+/** \brief  Set CPACR
+
+    This function assigns the given value to the Coprocessor Access Control register.
+
+    \param [in]    cpacr  Coprocessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+    register uint32_t __regCPACR         __ASM("cp15:0:c1:c0:2");
+    __regCPACR = cpacr;
+    __ISB();
+}
+
+/** \brief  Get CBAR
+
+    This function returns the value of the Configuration Base Address register.
+
+    \return               Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+    register uint32_t __regCBAR         __ASM("cp15:4:c15:c0:0");
+    return(__regCBAR);
+}
+
+/** \brief  Get TTBR0
+
+    This function returns the value of the Translation Table Base Register 0.
+
+    \return               Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+    register uint32_t __regTTBR0        __ASM("cp15:0:c2:c0:0");
+    return(__regTTBR0);
+}
+
+/** \brief  Set TTBR0
+
+    This function assigns the given value to the Translation Table Base Register 0.
+
+    \param [in]    ttbr0  Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+    register uint32_t __regTTBR0        __ASM("cp15:0:c2:c0:0");
+    __regTTBR0 = ttbr0;
+    __ISB();
+}
+
+/** \brief  Get DACR
+
+    This function returns the value of the Domain Access Control Register.
+
+    \return               Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+    register uint32_t __regDACR         __ASM("cp15:0:c3:c0:0");
+    return(__regDACR);
+}
+
+/** \brief  Set DACR
+
+    This function assigns the given value to the Domain Access Control Register.
+
+    \param [in]    dacr   Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+    register uint32_t __regDACR         __ASM("cp15:0:c3:c0:0");
+    __regDACR = dacr;
+    __ISB();
+}
+
+/******************************** Cache and BTAC enable  ****************************************************/
+
+/** \brief  Set SCTLR
+
+    This function assigns the given value to the System Control Register.
+
+    \param [in]    sctlr  System Control Register value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+    register uint32_t __regSCTLR         __ASM("cp15:0:c1:c0:0");
+    __regSCTLR = sctlr;
+}
+
+/** \brief  Get SCTLR
+
+    This function returns the value of the System Control Register.
+
+    \return               System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+    register uint32_t __regSCTLR         __ASM("cp15:0:c1:c0:0");
+    return(__regSCTLR);
+}
+
+/** \brief  Enable Caches
+
+    Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+    // Set I bit 12 to enable I Cache
+    // Set C bit  2 to enable D Cache
+    __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief  Disable Caches
+
+    Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+    // Clear I bit 12 to disable I Cache
+    // Clear C bit  2 to disable D Cache
+    __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+    __ISB();
+}
+
+/** \brief  Enable BTAC
+
+    Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+    // Set Z bit 11 to enable branch prediction
+    __set_SCTLR( __get_SCTLR() | (1 << 11));
+    __ISB();
+}
+
+/** \brief  Disable BTAC
+
+    Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+    // Clear Z bit 11 to disable branch prediction
+    __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief  Enable MMU
+
+    Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+    // Set M bit 0 to enable the MMU
+    // Set AFE bit to enable simplified access permissions model
+    // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+    __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+    __ISB();
+}
+
+/** \brief  Disable MMU
+
+    Disable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+    // Clear M bit 0 to disable the MMU
+    __set_SCTLR( __get_SCTLR() & ~1);
+    __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief  Invalidate the whole tlb
+
+    TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+    register uint32_t __TLBIALL         __ASM("cp15:0:c8:c7:0");
+    __TLBIALL = 0;
+    __DSB();
+    __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief  Invalidate entire branch predictor array
+
+    BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+    register uint32_t __BPIALL          __ASM("cp15:0:c7:c5:6");
+    __BPIALL  = 0;
+    __DSB();     //ensure completion of the invalidation
+    __ISB();     //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief  Invalidate the whole I$
+
+    ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+    register uint32_t __ICIALLU         __ASM("cp15:0:c7:c5:0");
+    __ICIALLU = 0;
+    __DSB();     //ensure completion of the invalidation
+    __ISB();     //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief  Clean D$ by MVA
+
+    DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+    register uint32_t __DCCMVAC         __ASM("cp15:0:c7:c10:1");
+    __DCCMVAC = (uint32_t)va;
+    __DMB();     //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief  Invalidate D$ by MVA
+
+    DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+    register uint32_t __DCIMVAC         __ASM("cp15:0:c7:c6:1");
+    __DCIMVAC = (uint32_t)va;
+    __DMB();     //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief  Clean and Invalidate D$ by MVA
+
+    DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+    register uint32_t __DCCIMVAC        __ASM("cp15:0:c7:c14:1");
+    __DCCIMVAC = (uint32_t)va;
+    __DMB();     //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief  Clean and Invalidate the entire data or unified cache
+
+    Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+        ARM 
+
+        PUSH    {R4-R11}
+
+        MRC     p15, 1, R6, c0, c0, 1      // Read CLIDR
+        ANDS    R3, R6, #0x07000000        // Extract coherency level
+        MOV     R3, R3, LSR #23            // Total cache levels << 1
+        BEQ     Finished                   // If 0, no need to clean
+
+        MOV     R10, #0                    // R10 holds current cache level << 1
+Loop1   ADD     R2, R10, R10, LSR #1       // R2 holds cache "Set" position
+        MOV     R1, R6, LSR R2             // Bottom 3 bits are the Cache-type for this level
+        AND     R1, R1, #7                 // Isolate those lower 3 bits
+        CMP     R1, #2
+        BLT     Skip                       // No cache or only instruction cache at this level
+
+        MCR     p15, 2, R10, c0, c0, 0     // Write the Cache Size selection register
+        ISB                                // ISB to sync the change to the CacheSizeID reg
+        MRC     p15, 1, R1, c0, c0, 0      // Reads current Cache Size ID register
+        AND     R2, R1, #7                 // Extract the line length field
+        ADD     R2, R2, #4                 // Add 4 for the line length offset (log2 16 bytes)
+        LDR     R4, =0x3FF
+        ANDS    R4, R4, R1, LSR #3         // R4 is the max number on the way size (right aligned)
+        CLZ     R5, R4                     // R5 is the bit position of the way size increment
+        LDR     R7, =0x7FFF
+        ANDS    R7, R7, R1, LSR #13        // R7 is the max number of the index size (right aligned)
+
+Loop2   MOV     R9, R4                     // R9 working copy of the max way size (right aligned)
+
+Loop3   ORR     R11, R10, R9, LSL R5       // Factor in the Way number and cache number into R11
+        ORR     R11, R11, R7, LSL R2       // Factor in the Set number
+        CMP     R0, #0
+        BNE     Dccsw
+        MCR     p15, 0, R11, c7, c6, 2     // DCISW. Invalidate by Set/Way
+        B       cont
+Dccsw   CMP     R0, #1
+        BNE     Dccisw
+        MCR     p15, 0, R11, c7, c10, 2    // DCCSW. Clean by Set/Way
+        B       cont
+Dccisw  MCR     p15, 0, R11, c7, c14, 2    // DCCISW. Clean and Invalidate by Set/Way
+cont    SUBS    R9, R9, #1                 // Decrement the Way number
+        BGE     Loop3
+        SUBS    R7, R7, #1                 // Decrement the Set number
+        BGE     Loop2
+Skip    ADD     R10, R10, #2               // Increment the cache number
+        CMP     R3, R10
+        BGT     Loop1
+
+Finished
+        DSB
+        POP    {R4-R11}
+        BX     lr
+
+}
+#pragma pop
+
+
+/** \brief  Invalidate the whole D$
+
+    DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+    __v7_all_cache(0);
+}
+
+/** \brief  Clean the whole D$
+
+    DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+    __v7_all_cache(1);
+}
+
+/** \brief  Clean and invalidate the whole D$
+
+    DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+    __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#define __inline inline
+
+inline static uint32_t __disable_irq_iar() {
+  int irq_dis = __get_CPSR() & 0x80;      // 7bit CPSR.I
+  __disable_irq();
+  return irq_dis;
+}
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief  Set Process Stack Pointer
+
+    This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+    \param [in]    topOfProcStack  USR/SYS Stack Pointer value to set
+ */
+// from rt_CMSIS.c
+__arm static inline void __set_PSP(uint32_t topOfProcStack) {
+__asm(
+  "    ARM\n"
+//  "    PRESERVE8\n"
+
+  "    BIC     R0, R0, #7  ;ensure stack is 8-byte aligned \n"
+  "    MRS     R1, CPSR \n"
+  "    CPS     #0x1F   ;no effect in USR mode \n"        // MODE_SYS
+  "    MOV     SP, R0 \n"
+  "    MSR     CPSR_c, R1  ;no effect in USR mode \n"
+  "    ISB \n"
+  "    BX      LR \n");
+}
+
+/** \brief  Set User Mode
+
+    This function changes the processor state to User Mode
+ */
+// from rt_CMSIS.c
+__arm static inline void __set_CPS_USR(void) {
+__asm(
+  "    ARM \n"
+
+  "    CPS  #0x10  \n"                  // MODE_USR
+  "    BX   LR\n");
+}
+
+/** \brief  Set TTBR0
+
+    This function assigns the given value to the Translation Table Base Register 0.
+
+    \param [in]    ttbr0  Translation Table Base Register 0 value to set
+ */
+// from mmu_Renesas_RZ_A1.c
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+    __MCR(15, 0, ttbr0, 2, 0, 0);      // reg to cp15
+    __ISB();
+}
+
+/** \brief  Set DACR
+
+    This function assigns the given value to the Domain Access Control Register.
+
+    \param [in]    dacr   Domain Access Control Register value to set
+ */
+// from mmu_Renesas_RZ_A1.c
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+    __MCR(15, 0, dacr, 3, 0, 0);      // reg to cp15
+    __ISB();
+}
+
+
+/******************************** Cache and BTAC enable  ****************************************************/
+/** \brief  Set SCTLR
+
+    This function assigns the given value to the System Control Register.
+
+    \param [in]    sctlr  System Control Register value to set
+ */
+// from __enable_mmu()
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr) {
+    __MCR(15, 0, sctlr, 1, 0, 0);      // reg to cp15
+}
+
+/** \brief  Get SCTLR
+
+    This function returns the value of the System Control Register.
+
+    \return               System Control Register value
+ */
+// from __enable_mmu()
+__STATIC_INLINE uint32_t __get_SCTLR() {
+	uint32_t __regSCTLR = __MRC(15, 0, 1, 0, 0);
+	return __regSCTLR;
+}
+
+/** \brief  Enable Caches
+
+    Enable Caches
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __enable_caches(void) {
+    __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief  Enable BTAC
+
+    Enable BTAC
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __enable_btac(void) {
+    __set_SCTLR( __get_SCTLR() | (1 << 11));
+    __ISB();
+}
+
+/** \brief  Enable MMU
+
+    Enable MMU
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __enable_mmu(void) {
+    // Set M bit 0 to enable the MMU
+    // Set AFE bit to enable simplified access permissions model
+    // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+    __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+    __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief  Invalidate the whole tlb
+
+    TLBIALL. Invalidate the whole tlb
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+	uint32_t val = 0;
+    __MCR(15, 0, val, 8, 7, 0);      // reg to cp15
+    __MCR(15, 0, val, 8, 6, 0);      // reg to cp15
+    __MCR(15, 0, val, 8, 5, 0);      // reg to cp15
+    __DSB();
+    __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief  Invalidate entire branch predictor array
+
+    BPIALL. Branch Predictor Invalidate All.
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __v7_inv_btac(void) {
+	uint32_t val = 0;
+    __MCR(15, 0, val, 7, 5, 6);      // reg to cp15
+    __DSB();     //ensure completion of the invalidation
+    __ISB();     //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief  Invalidate the whole I$
+
+    ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+	uint32_t val = 0;
+    __MCR(15, 0, val, 7, 5, 0);      // reg to cp15
+    __DSB();     //ensure completion of the invalidation
+    __ISB();     //ensure instruction fetch path sees new I cache state
+}
+
+// from __v7_inv_dcache_all()
+__arm static inline void __v7_all_cache(uint32_t op) {
+__asm(
+	"        ARM \n"
+
+	"        PUSH    {R4-R11} \n"
+
+	"        MRC     p15, 1, R6, c0, c0, 1\n"      // Read CLIDR
+	"        ANDS    R3, R6, #0x07000000\n"        // Extract coherency level
+	"        MOV     R3, R3, LSR #23\n"            // Total cache levels << 1
+	"        BEQ     Finished\n"                   // If 0, no need to clean
+
+	"        MOV     R10, #0\n"                    // R10 holds current cache level << 1
+    "Loop1:   ADD     R2, R10, R10, LSR #1\n"       // R2 holds cache "Set" position
+	"        MOV     R1, R6, LSR R2 \n"            // Bottom 3 bits are the Cache-type for this level
+	"        AND     R1, R1, #7 \n"                // Isolate those lower 3 bits
+	"        CMP     R1, #2 \n"
+	"        BLT     Skip \n"                      // No cache or only instruction cache at this level
+
+	"        MCR     p15, 2, R10, c0, c0, 0 \n"    // Write the Cache Size selection register
+	"        ISB \n"                               // ISB to sync the change to the CacheSizeID reg
+	"        MRC     p15, 1, R1, c0, c0, 0 \n"     // Reads current Cache Size ID register
+	"        AND     R2, R1, #7 \n"                // Extract the line length field
+	"        ADD     R2, R2, #4 \n"                // Add 4 for the line length offset (log2 16 bytes)
+	"        movw    R4, #0x3FF \n"
+	"        ANDS    R4, R4, R1, LSR #3 \n"        // R4 is the max number on the way size (right aligned)
+	"        CLZ     R5, R4 \n"                    // R5 is the bit position of the way size increment
+	"        movw    R7, #0x7FFF \n"
+	"        ANDS    R7, R7, R1, LSR #13 \n"       // R7 is the max number of the index size (right aligned)
+
+	"Loop2:   MOV     R9, R4 \n"                    // R9 working copy of the max way size (right aligned)
+
+	"Loop3:   ORR     R11, R10, R9, LSL R5 \n"      // Factor in the Way number and cache number into R11
+	"        ORR     R11, R11, R7, LSL R2 \n"      // Factor in the Set number
+	"        CMP     R0, #0 \n"
+	"        BNE     Dccsw \n"
+	"        MCR     p15, 0, R11, c7, c6, 2 \n"    // DCISW. Invalidate by Set/Way
+	"        B       cont \n"
+	"Dccsw:   CMP     R0, #1 \n"
+	"        BNE     Dccisw \n"
+	"        MCR     p15, 0, R11, c7, c10, 2 \n"   // DCCSW. Clean by Set/Way
+	"        B       cont \n"
+	"Dccisw:  MCR     p15, 0, R11, c7, c14, 2 \n"   // DCCISW, Clean and Invalidate by Set/Way
+	"cont:    SUBS    R9, R9, #1 \n"                // Decrement the Way number
+	"        BGE     Loop3 \n"
+	"        SUBS    R7, R7, #1 \n"                // Decrement the Set number
+	"        BGE     Loop2 \n"
+	"Skip:    ADD     R10, R10, #2 \n"              // increment the cache number
+	"        CMP     R3, R10 \n"
+	"        BGT     Loop1 \n"
+
+	"Finished: \n"
+	"        DSB \n"
+	"        POP    {R4-R11} \n"
+	"        BX     lr \n" );
+}
+
+/** \brief  Invalidate the whole D$
+
+    DCISW. Invalidate by Set/Way
+ */
+// from system_Renesas_RZ_A1.c
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+    __v7_all_cache(0);
+}
+/** \brief  Clean and Invalidate D$ by MVA
+
+    DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+    __MCR(15, 0, (uint32_t)va, 7, 14, 1);
+    __DMB();
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+    __ASM volatile ("cpsie i");
+}
+
+/** \brief  Disable IRQ Interrupts
+
+  This function disables IRQ interrupts by setting the I-bit in the CPSR.
+  Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __disable_irq(void)
+{
+    uint32_t result;
+
+    __ASM volatile ("mrs %0, cpsr" : "=r" (result));
+    __ASM volatile ("cpsid i");
+    return(result & 0x80);
+}
+
+
+/** \brief  Get APSR Register
+
+    This function returns the content of the APSR Register.
+
+    \return               APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+#if 1
+  register uint32_t __regAPSR;
+  __ASM volatile ("mrs %0, apsr" : "=r" (__regAPSR) );
+#else
+  register uint32_t __regAPSR          __ASM("apsr");
+#endif
+  return(__regAPSR);
+}
+
+
+/** \brief  Get CPSR Register
+
+    This function returns the content of the CPSR Register.
+
+    \return               CPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPSR(void)
+{
+#if 1
+  register uint32_t __regCPSR;
+  __ASM volatile ("mrs %0, cpsr" : "=r" (__regCPSR));
+#else
+  register uint32_t __regCPSR          __ASM("cpsr");
+#endif
+  return(__regCPSR);
+}
+
+#if 0
+/** \brief  Set Stack Pointer
+
+    This function assigns the given value to the current stack pointer.
+
+    \param [in]    topOfStack  Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+    register uint32_t __regSP       __ASM("sp");
+    __regSP = topOfStack;
+}
+#endif
+
+/** \brief  Get link register
+
+    This function returns the value of the link register
+
+    \return    Value of link register
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_LR(void)
+{
+  register uint32_t __reglr         __ASM("lr");
+  return(__reglr);
+}
+
+#if 0
+/** \brief  Set link register
+
+    This function sets the value of the link register
+
+    \param [in]    lr  LR value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_LR(uint32_t lr)
+{
+  register uint32_t __reglr         __ASM("lr");
+  __reglr = lr;
+}
+#endif
+
+/** \brief  Set Process Stack Pointer
+
+    This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+    \param [in]    topOfProcStack  USR/SYS Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+    __asm__ volatile (
+    ".ARM;"
+    ".eabi_attribute Tag_ABI_align8_preserved,1;"
+
+    "BIC     R0, R0, #7;" /* ;ensure stack is 8-byte aligned */
+    "MRS     R1, CPSR;"
+    "CPS     %0;"         /* ;no effect in USR mode */
+    "MOV     SP, R0;"
+    "MSR     CPSR_c, R1;" /* ;no effect in USR mode */
+    "ISB;"
+    //"BX      LR;"
+    :
+    : "i"(MODE_SYS)
+    : "r0", "r1");
+    return;
+}
+
+/** \brief  Set User Mode
+
+    This function changes the processor state to User Mode
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPS_USR(void)
+{
+    __asm__ volatile (
+    ".ARM;"
+
+    "CPS  %0;"
+    //"BX   LR;"
+    :
+    : "i"(MODE_USR)
+    : );
+    return;
+}
+
+
+/** \brief  Enable FIQ
+
+    This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq()                __asm__ volatile ("cpsie f")
+
+
+/** \brief  Disable FIQ
+
+    This function disables FIQ interrupts by setting the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq()               __asm__ volatile ("cpsid f")
+
+
+/** \brief  Get FPSCR
+
+    This function returns the current value of the Floating Point Status/Control register.
+
+    \return               Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+    uint32_t result;
+
+    __ASM volatile ("vmrs %0, fpscr" : "=r" (result) );
+    return (result);
+#else
+  register uint32_t __regfpscr         __ASM("fpscr");
+  return(__regfpscr);
+#endif
+#else
+   return(0);
+#endif
+}
+
+
+/** \brief  Set FPSCR
+
+    This function assigns the given value to the Floating Point Status/Control register.
+
+    \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+    __ASM volatile ("vmsr fpscr, %0" : : "r" (fpscr) );
+#else
+  register uint32_t __regfpscr         __ASM("fpscr");
+  __regfpscr = (fpscr);
+#endif
+#endif
+}
+
+/** \brief  Get FPEXC
+
+    This function returns the current value of the Floating Point Exception Control register.
+
+    \return               Floating Point Exception Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+    uint32_t result;
+
+    __ASM volatile ("vmrs %0, fpexc" : "=r" (result));
+    return (result);
+#else
+  register uint32_t __regfpexc         __ASM("fpexc");
+  return(__regfpexc);
+#endif
+#else
+   return(0);
+#endif
+}
+
+
+/** \brief  Set FPEXC
+
+    This function assigns the given value to the Floating Point Exception Control register.
+
+    \param [in]    fpscr  Floating Point Exception Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+    __ASM volatile ("vmsr fpexc, %0" : : "r" (fpexc));
+#else
+  register uint32_t __regfpexc         __ASM("fpexc");
+  __regfpexc = (fpexc);
+#endif
+#endif
+}
+
+/** \brief  Get CPACR
+
+    This function returns the current value of the Coprocessor Access Control register.
+
+    \return               Coprocessor Access Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPACR(void)
+{
+#if 1
+    register uint32_t __regCPACR;
+    __ASM volatile ("mrc p15, 0, %0, c1, c0, 2" : "=r" (__regCPACR));
+#else
+    register uint32_t __regCPACR         __ASM("cp15:0:c1:c0:2");
+#endif
+    return __regCPACR;
+}
+
+/** \brief  Set CPACR
+
+    This function assigns the given value to the Coprocessor Access Control register.
+
+    \param [in]    cpacr  Coprocessor Acccess Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+#if 1
+    __ASM volatile ("mcr p15, 0, %0, c1, c0, 2" : : "r" (cpacr));
+#else
+    register uint32_t __regCPACR         __ASM("cp15:0:c1:c0:2");
+    __regCPACR = cpacr;
+#endif
+    __ISB();
+}
+
+/** \brief  Get CBAR
+
+    This function returns the value of the Configuration Base Address register.
+
+    \return               Configuration Base Address register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CBAR() {
+#if 1
+    register uint32_t __regCBAR;
+    __ASM volatile ("mrc p15, 4, %0, c15, c0, 0" : "=r" (__regCBAR));
+#else
+    register uint32_t __regCBAR         __ASM("cp15:4:c15:c0:0");
+#endif
+    return(__regCBAR);
+}
+
+/** \brief  Get TTBR0
+
+    This function returns the value of the Translation Table Base Register 0.
+
+    \return               Translation Table Base Register 0 value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_TTBR0() {
+#if 1
+    register uint32_t __regTTBR0;
+    __ASM volatile ("mrc p15, 0, %0, c2, c0, 0" : "=r" (__regTTBR0));
+#else
+    register uint32_t __regTTBR0        __ASM("cp15:0:c2:c0:0");
+#endif
+    return(__regTTBR0);
+}
+
+/** \brief  Set TTBR0
+
+    This function assigns the given value to the Translation Table Base Register 0.
+
+    \param [in]    ttbr0  Translation Table Base Register 0 value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+#if 1
+	__ASM volatile ("mcr p15, 0, %0, c2, c0, 0" : : "r" (ttbr0));
+#else
+    register uint32_t __regTTBR0        __ASM("cp15:0:c2:c0:0");
+    __regTTBR0 = ttbr0;
+#endif
+    __ISB();
+}
+
+/** \brief  Get DACR
+
+    This function returns the value of the Domain Access Control Register.
+
+    \return               Domain Access Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_DACR() {
+#if 1
+    register uint32_t __regDACR;
+    __ASM volatile ("mrc p15, 0, %0, c3, c0, 0" : "=r" (__regDACR));
+#else
+    register uint32_t __regDACR         __ASM("cp15:0:c3:c0:0");
+#endif
+    return(__regDACR);
+}
+
+/** \brief  Set DACR
+
+    This function assigns the given value to the Domain Access Control Register.
+
+    \param [in]    dacr   Domain Access Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_DACR(uint32_t dacr) {
+#if 1
+	__ASM volatile ("mcr p15, 0, %0, c3, c0, 0" : : "r" (dacr));
+#else
+    register uint32_t __regDACR         __ASM("cp15:0:c3:c0:0");
+    __regDACR = dacr;
+#endif
+    __ISB();
+}
+
+/******************************** Cache and BTAC enable  ****************************************************/
+
+/** \brief  Set SCTLR
+
+    This function assigns the given value to the System Control Register.
+
+    \param [in]    sctlr  System Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+#if 1
+	__ASM volatile ("mcr p15, 0, %0, c1, c0, 0" : : "r" (sctlr));
+#else
+    register uint32_t __regSCTLR         __ASM("cp15:0:c1:c0:0");
+    __regSCTLR = sctlr;
+#endif
+}
+
+/** \brief  Get SCTLR
+
+    This function returns the value of the System Control Register.
+
+    \return               System Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_SCTLR() {
+#if 1
+	register uint32_t __regSCTLR;
+	__ASM volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (__regSCTLR));
+#else
+    register uint32_t __regSCTLR         __ASM("cp15:0:c1:c0:0");
+#endif
+    return(__regSCTLR);
+}
+
+/** \brief  Enable Caches
+
+    Enable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_caches(void) {
+    // Set I bit 12 to enable I Cache
+    // Set C bit  2 to enable D Cache
+    __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief  Disable Caches
+
+    Disable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_caches(void) {
+    // Clear I bit 12 to disable I Cache
+    // Clear C bit  2 to disable D Cache
+    __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+    __ISB();
+}
+
+/** \brief  Enable BTAC
+
+    Enable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_btac(void) {
+    // Set Z bit 11 to enable branch prediction
+    __set_SCTLR( __get_SCTLR() | (1 << 11));
+    __ISB();
+}
+
+/** \brief  Disable BTAC
+
+    Disable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_btac(void) {
+    // Clear Z bit 11 to disable branch prediction
+    __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief  Enable MMU
+
+    Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_mmu(void) {
+    // Set M bit 0 to enable the MMU
+    // Set AFE bit to enable simplified access permissions model
+    // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+    __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+    __ISB();
+}
+
+/** \brief  Disable MMU
+
+    Disable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_mmu(void) {
+    // Clear M bit 0 to disable the MMU
+    __set_SCTLR( __get_SCTLR() & ~1);
+    __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief  Invalidate the whole tlb
+
+    TLBIALL. Invalidate the whole tlb
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+#if 1
+	__ASM volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0));
+#else
+    register uint32_t __TLBIALL         __ASM("cp15:0:c8:c7:0");
+    __TLBIALL = 0;
+#endif
+    __DSB();
+    __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief  Invalidate entire branch predictor array
+
+    BPIALL. Branch Predictor Invalidate All.
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_btac(void) {
+#if 1
+	__ASM volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
+#else
+    register uint32_t __BPIALL          __ASM("cp15:0:c7:c5:6");
+    __BPIALL  = 0;
+#endif
+    __DSB();     //ensure completion of the invalidation
+    __ISB();     //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief  Invalidate the whole I$
+
+    ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_icache_all(void) {
+#if 1
+	__ASM volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+#else
+    register uint32_t __ICIALLU         __ASM("cp15:0:c7:c5:0");
+    __ICIALLU = 0;
+#endif
+    __DSB();     //ensure completion of the invalidation
+    __ISB();     //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief  Clean D$ by MVA
+
+    DCCMVAC. Data cache clean by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+#if 1
+    __ASM volatile ("mcr p15, 0, %0, c7, c10, 1" : : "r" ((uint32_t)va));
+#else
+    register uint32_t __DCCMVAC         __ASM("cp15:0:c7:c10:1");
+    __DCCMVAC = (uint32_t)va;
+#endif
+    __DMB();     //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief  Invalidate D$ by MVA
+
+    DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+#if 1
+    __ASM volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" ((uint32_t)va));
+#else
+    register uint32_t __DCIMVAC         __ASM("cp15:0:c7:c6:1");
+    __DCIMVAC = (uint32_t)va;
+#endif
+    __DMB();     //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief  Clean and Invalidate D$ by MVA
+
+    DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+#if 1
+    __ASM volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" ((uint32_t)va));
+#else
+    register uint32_t __DCCIMVAC        __ASM("cp15:0:c7:c14:1");
+    __DCCIMVAC = (uint32_t)va;
+#endif
+    __DMB();     //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief  Clean and Invalidate the entire data or unified cache
+
+    Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+extern void __v7_all_cache(uint32_t op);
+
+
+/** \brief  Invalidate the whole D$
+
+    DCISW. Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_all(void) {
+    __v7_all_cache(0);
+}
+
+/** \brief  Clean the whole D$
+
+    DCCSW. Clean by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_all(void) {
+    __v7_all_cache(1);
+}
+
+/** \brief  Clean and invalidate the whole D$
+
+    DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+    __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_caInstr.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,45 @@
+/**************************************************************************//**
+ * @file     core_caInstr.h
+ * @brief    CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date     04. December 2012
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+#ifndef __CORE_CAINSTR_H__
+#define __CORE_CAINSTR_H__
+
+#define __CORTEX_M 0x3
+#include "core_cmInstr.h"
+#undef  __CORTEX_M
+
+#endif
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_ca_mmu.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,847 @@
+;/**************************************************************************//**
+; * @file     core_ca_mmu.h
+; * @brief    MMU Startup File for A9_MP Device Series
+; * @version  V1.01
+; * @date     10 Sept 2014
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012-2014 ARM LIMITED
+;
+;   All rights reserved.
+;   Redistribution and use in source and binary forms, with or without
+;   modification, are permitted provided that the following conditions are met:
+;   - Redistributions of source code must retain the above copyright
+;     notice, this list of conditions and the following disclaimer.
+;   - Redistributions in binary form must reproduce the above copyright
+;     notice, this list of conditions and the following disclaimer in the
+;     documentation and/or other materials provided with the distribution.
+;   - Neither the name of ARM nor the names of its contributors may be used
+;     to endorse or promote products derived from this software without
+;     specific prior written permission.
+;   *
+;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+;   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+;   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+;   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+;   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+;   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+;   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+;   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+;   POSSIBILITY OF SUCH DAMAGE.
+;   ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR      (0x2)
+#define SECTION_MASK            (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK      (0xFFFF8FF3)
+#define SECTION_B_SHIFT         (2)
+#define SECTION_C_SHIFT         (3)
+#define SECTION_TEX0_SHIFT      (12)
+#define SECTION_TEX1_SHIFT      (13)
+#define SECTION_TEX2_SHIFT      (14)
+
+#define SECTION_XN_MASK         (0xFFFFFFEF)
+#define SECTION_XN_SHIFT        (4)
+
+#define SECTION_DOMAIN_MASK     (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT    (5)
+
+#define SECTION_P_MASK          (0xFFFFFDFF)
+#define SECTION_P_SHIFT         (9)
+
+#define SECTION_AP_MASK         (0xFFFF73FF)
+#define SECTION_AP_SHIFT        (10)
+#define SECTION_AP2_SHIFT       (15)
+
+#define SECTION_S_MASK          (0xFFFEFFFF)
+#define SECTION_S_SHIFT         (16)
+
+#define SECTION_NG_MASK         (0xFFFDFFFF)
+#define SECTION_NG_SHIFT        (17)
+
+#define SECTION_NS_MASK         (0xFFF7FFFF)
+#define SECTION_NS_SHIFT        (19)
+
+
+#define PAGE_L1_DESCRIPTOR      (0x1)
+#define PAGE_L1_MASK            (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC         (0x2)
+#define PAGE_L2_4K_MASK         (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC        (0x1)
+#define PAGE_L2_64K_MASK        (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK      (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT         (2)
+#define PAGE_4K_C_SHIFT         (3)
+#define PAGE_4K_TEX0_SHIFT      (6)
+#define PAGE_4K_TEX1_SHIFT      (7)
+#define PAGE_4K_TEX2_SHIFT      (8)
+
+#define PAGE_64K_TEXCB_MASK     (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT        (2)
+#define PAGE_64K_C_SHIFT        (3)
+#define PAGE_64K_TEX0_SHIFT     (12)
+#define PAGE_64K_TEX1_SHIFT     (13)
+#define PAGE_64K_TEX2_SHIFT     (14)
+
+#define PAGE_TEXCB_MASK         (0xFFFF8FF3)
+#define PAGE_B_SHIFT            (2)
+#define PAGE_C_SHIFT            (3)
+#define PAGE_TEX_SHIFT          (12)
+
+#define PAGE_XN_4K_MASK         (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT        (0)
+#define PAGE_XN_64K_MASK        (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT       (15)
+
+
+#define PAGE_DOMAIN_MASK        (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT       (5)
+
+#define PAGE_P_MASK             (0xFFFFFDFF)
+#define PAGE_P_SHIFT            (9)
+
+#define PAGE_AP_MASK            (0xFFFFFDCF)
+#define PAGE_AP_SHIFT           (4)
+#define PAGE_AP2_SHIFT          (9)
+
+#define PAGE_S_MASK             (0xFFFFFBFF)
+#define PAGE_S_SHIFT            (10)
+
+#define PAGE_NG_MASK            (0xFFFFF7FF)
+#define PAGE_NG_SHIFT           (11)
+
+#define PAGE_NS_MASK            (0xFFFFFFF7)
+#define PAGE_NS_SHIFT           (3)
+
+#define OFFSET_1M               (0x00100000)
+#define OFFSET_64K              (0x00010000)
+#define OFFSET_4K               (0x00001000)
+
+#define DESCRIPTOR_FAULT        (0x00000000)
+
+/* ###########################  MMU Function Access  ########################### */
+/** \ingroup  MMU_FunctionInterface
+    \defgroup MMU_Functions MMU Functions Interface
+  @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+   SECTION,
+   PAGE_4k,
+   PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+   NORMAL,
+   DEVICE,
+   SHARED_DEVICE,
+   NON_SHARED_DEVICE,
+   STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+   NON_CACHEABLE,
+   WB_WA,
+   WT,
+   WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+   ECC_DISABLED,
+   ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+   EXECUTE,
+   NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+   GLOBAL,
+   NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+   NON_SHARED,
+   SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+   SECURE,
+   NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+   NO_ACCESS,
+   RW,
+   READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+    mmu_region_size_Type rg_t;
+    mmu_memory_Type mem_t;
+    uint8_t domain;
+    mmu_cacheability_Type inner_norm_t;
+    mmu_cacheability_Type outer_norm_t;
+    mmu_ecc_check_Type e_t;
+    mmu_execute_Type xn_t;
+    mmu_global_Type g_t;
+    mmu_secure_Type sec_t;
+    mmu_access_Type priv_t;
+    mmu_access_Type user_t;
+    mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief  Set section execution-never attribute
+
+    The function sets section execution-never attribute
+
+    \param [out]    descriptor_l1  L1 descriptor.
+    \param [in]                xn  Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+    \return          0  
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+    *descriptor_l1 &= SECTION_XN_MASK;
+    *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+    return 0;
+}
+
+/** \brief  Set section domain
+
+    The function sets section domain
+
+    \param [out]    descriptor_l1  L1 descriptor.
+    \param [in]            domain  Section domain
+
+    \return          0  
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+    *descriptor_l1 &= SECTION_DOMAIN_MASK;
+    *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+    return 0;
+}
+
+/** \brief  Set section parity check
+
+    The function sets section parity check
+
+    \param [out]    descriptor_l1  L1 descriptor.
+    \param [in]              p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+    \return          0  
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+    *descriptor_l1 &= SECTION_P_MASK;
+    *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+    return 0;
+}
+
+/** \brief  Set section access privileges
+
+    The function sets section access privileges
+
+    \param [out]    descriptor_l1  L1 descriptor.
+    \param [in]              user  User Level Access: NO_ACCESS, RW, READ
+    \param [in]              priv  Privilege Level Access: NO_ACCESS, RW, READ
+    \param [in]               afe  Access flag enable
+
+    \return          0  
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv,  uint32_t afe)
+{
+    uint32_t ap = 0;
+
+    if (afe == 0) { //full access
+        if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+        else if ((priv == RW) && (user == NO_ACCESS))   { ap = 0x1; }
+        else if ((priv == RW) && (user == READ))        { ap = 0x2; }
+        else if ((priv == RW) && (user == RW))          { ap = 0x3; }
+        else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+        else if ((priv == READ) && (user == READ))      { ap = 0x7; }
+    }
+
+    else { //Simplified access
+        if ((priv == RW) && (user == NO_ACCESS))        { ap = 0x1; }
+        else if ((priv == RW) && (user == RW))          { ap = 0x3; }
+        else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+        else if ((priv == READ) && (user == READ))      { ap = 0x7; }
+    }
+
+    *descriptor_l1 &= SECTION_AP_MASK;
+    *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+    *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+    return 0;
+}
+
+/** \brief  Set section shareability
+
+    The function sets section shareability
+
+    \param [out]    descriptor_l1  L1 descriptor.
+    \param [in]             s_bit  Section shareability: NON_SHARED, SHARED
+
+    \return          0  
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+    *descriptor_l1 &= SECTION_S_MASK;
+    *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+    return 0;
+}
+
+/** \brief  Set section Global attribute
+
+    The function sets section Global attribute
+
+    \param [out]    descriptor_l1  L1 descriptor.
+    \param [in]             g_bit  Section attribute: GLOBAL, NON_GLOBAL
+
+    \return          0  
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+    *descriptor_l1 &= SECTION_NG_MASK;
+    *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+    return 0;
+}
+
+/** \brief  Set section Security attribute
+
+    The function sets section Global attribute
+
+    \param [out]    descriptor_l1  L1 descriptor.
+    \param [in]             s_bit  Section Security attribute: SECURE, NON_SECURE
+
+    \return          0  
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+    *descriptor_l1 &= SECTION_NS_MASK;
+    *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+    return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief  Set 4k/64k page execution-never attribute
+
+    The function sets 4k/64k page execution-never attribute
+
+    \param [out]    descriptor_l2  L2 descriptor.
+    \param [in]                xn  Page execution-never attribute : EXECUTE , NON_EXECUTE.
+    \param [in]              page  Page size: PAGE_4k, PAGE_64k,
+   
+    \return          0  
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+    if (page == PAGE_4k)
+    {
+        *descriptor_l2 &= PAGE_XN_4K_MASK;
+        *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+    }
+    else
+    {
+        *descriptor_l2 &= PAGE_XN_64K_MASK;
+        *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+    }
+    return 0;
+}
+
+/** \brief  Set 4k/64k page domain
+
+    The function sets 4k/64k page domain
+
+    \param [out]    descriptor_l1  L1 descriptor.
+    \param [in]            domain  Page domain
+
+    \return          0  
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+    *descriptor_l1 &= PAGE_DOMAIN_MASK;
+    *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+    return 0;
+}
+
+/** \brief  Set 4k/64k page parity check
+
+    The function sets 4k/64k page parity check
+
+    \param [out]    descriptor_l1  L1 descriptor.
+    \param [in]              p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+    \return          0  
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+    *descriptor_l1 &= SECTION_P_MASK;
+    *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+    return 0;
+}
+
+/** \brief  Set 4k/64k page access privileges
+
+    The function sets 4k/64k page access privileges
+
+    \param [out]    descriptor_l2  L2 descriptor.
+    \param [in]              user  User Level Access: NO_ACCESS, RW, READ
+    \param [in]              priv  Privilege Level Access: NO_ACCESS, RW, READ
+    \param [in]               afe  Access flag enable
+
+    \return          0  
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv,  uint32_t afe)
+{
+    uint32_t ap = 0;
+
+    if (afe == 0) { //full access
+        if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+        else if ((priv == RW) && (user == NO_ACCESS))   { ap = 0x1; }
+        else if ((priv == RW) && (user == READ))        { ap = 0x2; }
+        else if ((priv == RW) && (user == RW))          { ap = 0x3; }
+        else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+        else if ((priv == READ) && (user == READ))      { ap = 0x6; }
+    }
+
+    else { //Simplified access
+        if ((priv == RW) && (user == NO_ACCESS))        { ap = 0x1; }
+        else if ((priv == RW) && (user == RW))          { ap = 0x3; }
+        else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+        else if ((priv == READ) && (user == READ))      { ap = 0x7; }
+    }
+
+    *descriptor_l2 &= PAGE_AP_MASK;
+    *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+    *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+    return 0;
+}
+
+/** \brief  Set 4k/64k page shareability
+
+    The function sets 4k/64k page shareability
+
+    \param [out]    descriptor_l2  L2 descriptor.
+    \param [in]             s_bit  4k/64k page shareability: NON_SHARED, SHARED
+
+    \return          0  
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+    *descriptor_l2 &= PAGE_S_MASK;
+    *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+    return 0;
+}
+
+/** \brief  Set 4k/64k page Global attribute
+
+    The function sets 4k/64k page Global attribute
+
+    \param [out]    descriptor_l2  L2 descriptor.
+    \param [in]             g_bit  4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+    \return          0  
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+    *descriptor_l2 &= PAGE_NG_MASK;
+    *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+    return 0;
+}
+
+/** \brief  Set 4k/64k page Security attribute
+
+    The function sets 4k/64k page Global attribute
+
+    \param [out]    descriptor_l1  L1 descriptor.
+    \param [in]             s_bit  4k/64k page Security attribute: SECURE, NON_SECURE
+
+    \return          0  
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+    *descriptor_l1 &= PAGE_NS_MASK;
+    *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+    return 0;
+}
+
+
+/** \brief  Set Section memory attributes
+
+    The function sets section memory attributes
+
+    \param [out]    descriptor_l1  L1 descriptor.
+    \param [in]               mem  Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+    \param [in]             outer  Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+    \param [in]             inner  Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+    \return          0  
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+    *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+    if (STRONGLY_ORDERED == mem)
+    {
+        return 0;
+    }
+    else if (SHARED_DEVICE == mem)
+    {
+        *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+    }
+    else if (NON_SHARED_DEVICE == mem)
+    {
+        *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+    }
+    else if (NORMAL == mem)
+    {
+           *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+           switch(inner)
+           {
+            case NON_CACHEABLE:
+            break;
+            case WB_WA:
+                *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+                break;
+            case WT:
+                *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+                break;
+            case WB_NO_WA:
+                *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+                break;
+        }
+        switch(outer)
+        {
+            case NON_CACHEABLE:
+             break;
+            case WB_WA:
+                *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+                break;
+            case WT:
+                *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+                break;
+            case WB_NO_WA:
+                *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+                break;
+        }
+    }
+
+    return 0;
+}
+
+/** \brief  Set 4k/64k page memory attributes
+
+    The function sets 4k/64k page memory attributes
+
+    \param [out]    descriptor_l2  L2 descriptor.
+    \param [in]               mem  4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+    \param [in]             outer  Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+    \param [in]             inner  Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+    \return          0  
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+    *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+    if (page == PAGE_64k)
+    {
+        //same as section
+        __memory_section(descriptor_l2, mem, outer, inner);
+    }
+    else
+    {
+        if (STRONGLY_ORDERED == mem)
+        {
+            return 0;
+        }
+        else if (SHARED_DEVICE == mem)
+        {
+            *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+        }
+        else if (NON_SHARED_DEVICE == mem)
+        {
+             *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+        }
+        else if (NORMAL == mem)
+        {
+            *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+            switch(inner)
+            {
+                case NON_CACHEABLE:
+                break;
+                case WB_WA:
+                     *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+                     break;
+                case WT:
+                    *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+                     break;
+                case WB_NO_WA:
+                    *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+                    break;
+            }
+            switch(outer)
+            {
+                case NON_CACHEABLE:
+                break;
+                case WB_WA:
+                      *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+                    break;
+                case WT:
+                     *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+                    break;
+                case WB_NO_WA:
+                    *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+                    break;
+            }
+        }
+    }
+
+    return 0;
+}
+
+/** \brief  Create a L1 section descriptor
+
+    The function creates a section descriptor.
+    
+    Assumptions:
+    - 16MB super sections not supported
+    - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+    - Functions always return 0
+
+    \param [out]       descriptor  L1 descriptor
+    \param [out]      descriptor2  L2 descriptor
+    \param [in]               reg  Section attributes
+
+    \return          0  
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+    *descriptor  = 0;
+
+   __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+   __xn_section(descriptor,reg.xn_t);
+   __domain_section(descriptor, reg.domain);
+   __p_section(descriptor, reg.e_t);
+   __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+   __shared_section(descriptor,reg.sh_t);
+   __global_section(descriptor,reg.g_t);
+   __secure_section(descriptor,reg.sec_t);
+   *descriptor &= SECTION_MASK;
+   *descriptor |= SECTION_DESCRIPTOR;
+
+   return 0;
+
+}
+
+
+/** \brief  Create a L1 and L2 4k/64k page descriptor
+
+    The function creates a 4k/64k page descriptor.
+    Assumptions:
+    - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+    - Functions always return 0
+
+    \param [out]       descriptor  L1 descriptor
+    \param [out]      descriptor2  L2 descriptor
+    \param [in]               reg  4k/64k page attributes
+
+    \return          0  
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+    *descriptor  = 0;
+    *descriptor2 = 0;
+
+    switch (reg.rg_t)
+    {
+        case PAGE_4k:
+            __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+            __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+            __domain_page(descriptor, reg.domain);
+            __p_page(descriptor, reg.e_t);
+            __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+            __shared_page(descriptor2,reg.sh_t);
+            __global_page(descriptor2,reg.g_t);
+            __secure_page(descriptor,reg.sec_t);
+            *descriptor &= PAGE_L1_MASK;
+            *descriptor |= PAGE_L1_DESCRIPTOR;
+            *descriptor2 &= PAGE_L2_4K_MASK;
+            *descriptor2 |= PAGE_L2_4K_DESC;
+            break;
+
+        case PAGE_64k:
+            __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+            __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+            __domain_page(descriptor, reg.domain);
+            __p_page(descriptor, reg.e_t);
+            __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+            __shared_page(descriptor2,reg.sh_t);
+            __global_page(descriptor2,reg.g_t);
+            __secure_page(descriptor,reg.sec_t);
+            *descriptor &= PAGE_L1_MASK;
+            *descriptor |= PAGE_L1_DESCRIPTOR;
+            *descriptor2 &= PAGE_L2_64K_MASK;
+            *descriptor2 |= PAGE_L2_64K_DESC;
+            break;
+
+        case SECTION:
+            //error
+            break;    
+
+    }
+
+   return 0;
+
+}
+
+/** \brief  Create a 1MB Section
+
+    \param [in]               ttb  Translation table base address
+    \param [in]      base_address  Section base address
+    \param [in]             count  Number of sections to create
+    \param [in]     descriptor_l1  L1 descriptor (region attributes) 
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+    uint32_t offset;
+    uint32_t entry;
+    uint32_t i;
+
+    offset = base_address >> 20;
+    entry  = (base_address & 0xFFF00000) | descriptor_l1;
+
+    //4 bytes aligned
+    ttb = ttb + offset;
+
+    for (i = 0; i < count; i++ )
+    {
+        //4 bytes aligned
+       *ttb++ = entry;
+       entry += OFFSET_1M;
+    }
+}
+
+/** \brief  Create a 4k page entry
+
+    \param [in]               ttb  L1 table base address
+    \param [in]      base_address  4k base address
+    \param [in]             count  Number of 4k pages to create
+    \param [in]     descriptor_l1  L1 descriptor (region attributes) 
+    \param [in]            ttb_l2  L2 table base address
+    \param [in]     descriptor_l2  L2 descriptor (region attributes) 
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+    uint32_t offset, offset2;
+    uint32_t entry, entry2;
+    uint32_t i;
+
+
+    offset = base_address >> 20;
+    entry  = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+    //4 bytes aligned
+    ttb += offset;
+    //create l1_entry
+    *ttb = entry;
+
+    offset2 = (base_address & 0xff000) >> 12;
+    ttb_l2 += offset2;
+    entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+    for (i = 0; i < count; i++ )
+    {
+        //4 bytes aligned
+       *ttb_l2++ = entry2;
+       entry2 += OFFSET_4K;
+    }
+}
+
+/** \brief  Create a 64k page entry
+
+    \param [in]               ttb  L1 table base address
+    \param [in]      base_address  64k base address
+    \param [in]             count  Number of 64k pages to create
+    \param [in]     descriptor_l1  L1 descriptor (region attributes) 
+    \param [in]            ttb_l2  L2 table base address
+    \param [in]     descriptor_l2  L2 descriptor (region attributes) 
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+    uint32_t offset, offset2;
+    uint32_t entry, entry2;
+    uint32_t i,j;
+
+
+    offset = base_address >> 20;
+    entry  = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+    //4 bytes aligned
+    ttb += offset;
+    //create l1_entry
+    *ttb = entry;
+
+    offset2 = (base_address & 0xff000) >> 12;
+    ttb_l2 += offset2;
+    entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+    for (i = 0; i < count; i++ )
+    {
+        //create 16 entries
+        for (j = 0; j < 16; j++)
+            //4 bytes aligned
+            *ttb_l2++ = entry2;
+        entry2 += OFFSET_64K;
+    }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_cm0.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,740 @@
+/**************************************************************************//**
+ * @file     core_cm0.h
+ * @brief    CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version  V4.10
+ * @date     18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+  @{
+ */
+
+/*  CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN  (0x04)                                   /*!< [31:16] CMSIS HAL main version   */
+#define __CM0_CMSIS_VERSION_SUB   (0x00)                                   /*!< [15:0]  CMSIS HAL sub version    */
+#define __CM0_CMSIS_VERSION       ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+                                    __CM0_CMSIS_VERSION_SUB          )     /*!< CMSIS HAL version number         */
+
+#define __CORTEX_M                (0x00)                                   /*!< Cortex-M Core                    */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TMS470__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __CSMC__ )
+  #define __packed
+  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler      */
+  #define __INLINE         inline                                    /*use -pc99 on compile line !< inline keyword for COSMIC Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TMS470__ )
+  #if defined __TI__VFP_SUPPORT____
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )		/* Cosmic */
+  #if ( __CSMC__ & 0x400)		// FPU present for parser
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+#endif
+
+#include <stdint.h>                      /* standard types definitions                      */
+#include <core_cmInstr.h>                /* Core Instruction Access                         */
+#include <core_cmFunc.h>                 /* Core Function Access                            */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM0_REV
+    #define __CM0_REV               0x0000
+    #warning "__CM0_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+    \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_CORE  Status and Control Registers
+    \brief  Core Register type definitions.
+  @{
+ */
+
+/** \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved                           */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31                                             /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30                                             /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29                                             /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28                                             /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/** \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0                                             /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved                           */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0)          */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved                           */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31                                             /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30                                             /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29                                             /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28                                             /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24                                             /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0                                             /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:1;               /*!< bit:      0  Reserved                           */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used                   */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1                                             /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+    \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IO uint32_t ISER[1];                 /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register           */
+       uint32_t RESERVED0[31];
+  __IO uint32_t ICER[1];                 /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register          */
+       uint32_t RSERVED1[31];
+  __IO uint32_t ISPR[1];                 /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register           */
+       uint32_t RESERVED2[31];
+  __IO uint32_t ICPR[1];                 /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register         */
+       uint32_t RESERVED3[31];
+       uint32_t RESERVED4[64];
+  __IO uint32_t IP[8];                   /*!< Offset: 0x300 (R/W)  Interrupt Priority Register              */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCB     System Control Block (SCB)
+    \brief      Type definitions for the System Control Block Registers
+  @{
+ */
+
+/** \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __I  uint32_t CPUID;                   /*!< Offset: 0x000 (R/ )  CPUID Base Register                                   */
+  __IO uint32_t ICSR;                    /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register                  */
+       uint32_t RESERVED0;
+  __IO uint32_t AIRCR;                   /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register      */
+  __IO uint32_t SCR;                     /*!< Offset: 0x010 (R/W)  System Control Register                               */
+  __IO uint32_t CCR;                     /*!< Offset: 0x014 (R/W)  Configuration Control Register                        */
+       uint32_t RESERVED1;
+  __IO uint32_t SHP[2];                  /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED   */
+  __IO uint32_t SHCSR;                   /*!< Offset: 0x024 (R/W)  System Handler Control and State Register             */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24                                             /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20                                             /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16                                             /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4                                             /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0                                             /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31                                             /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28                                             /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27                                             /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26                                             /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25                                             /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23                                             /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22                                             /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12                                             /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0                                             /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16                                             /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16                                             /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15                                             /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2                                             /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1                                             /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4                                             /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2                                             /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1                                             /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9                                             /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3                                             /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15                                             /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+    \brief      Type definitions for the System Timer Registers.
+  @{
+ */
+
+/** \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                    /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                     /*!< Offset: 0x008 (R/W)  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                   /*!< Offset: 0x00C (R/ )  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+    \brief      Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+                are only accessible over DAP and not via processor. Therefore
+                they are not covered by the Cortex-M0 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_core_base     Core Definitions
+    \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address              */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address                 */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct           */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct       */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct          */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+    \brief      Functions that manage interrupts and exceptions via the NVIC.
+    @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M                   */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+
+/** \brief  Enable External Interrupt
+
+    The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Disable External Interrupt
+
+    The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Get Pending Interrupt
+
+    The function reads the pending register in the NVIC and returns the pending bit
+    for the specified interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not pending.
+    \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->ISPR[0] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief  Set Pending Interrupt
+
+    The function sets the pending bit of an external interrupt.
+
+    \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Clear Pending Interrupt
+
+    The function clears the pending bit of an external interrupt.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Set Interrupt Priority
+
+    The function sets the priority of an interrupt.
+
+    \note The priority cannot be set for every core interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+    \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if((int32_t)(IRQn) < 0) {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/** \brief  Get Interrupt Priority
+
+    The function reads the priority of an interrupt. The interrupt
+    number can be positive to specify an external (device specific)
+    interrupt, or negative to specify an internal (core) interrupt.
+
+
+    \param [in]   IRQn  Interrupt number.
+    \return             Interrupt Priority. Value is aligned automatically to the implemented
+                        priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if((int32_t)(IRQn) < 0) {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+  }
+  else {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/** \brief  System Reset
+
+    The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                     /* Ensure all outstanding memory accesses included
+                                                                  buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                     /* Ensure completion of memory access */
+  while(1) { __NOP(); }                                        /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+    \brief      Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief  System Tick Configuration
+
+    The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+    Counter is in free running mode to generate periodic interrupts.
+
+    \param [in]  ticks  Number of ticks between two interrupts.
+
+    \return          0  Function succeeded.
+    \return          1  Function failed.
+
+    \note     When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+    function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+    must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); }    /* Reload value impossible */
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_cm0plus.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,854 @@
+/**************************************************************************//**
+ * @file     core_cm0plus.h
+ * @brief    CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version  V4.10
+ * @date     18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+  @{
+ */
+
+/*  CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x04)                                /*!< [31:16] CMSIS HAL main version   */
+#define __CM0PLUS_CMSIS_VERSION_SUB  (0x00)                                /*!< [15:0]  CMSIS HAL sub version    */
+#define __CM0PLUS_CMSIS_VERSION      ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+                                       __CM0PLUS_CMSIS_VERSION_SUB)        /*!< CMSIS HAL version number         */
+
+#define __CORTEX_M                (0x00)                                   /*!< Cortex-M Core                    */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TMS470__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __CSMC__ )
+  #define __packed
+  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler      */
+  #define __INLINE         inline                                    /*use -pc99 on compile line !< inline keyword for COSMIC Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TMS470__ )
+  #if defined __TI__VFP_SUPPORT____
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )		/* Cosmic */
+  #if ( __CSMC__ & 0x400)		// FPU present for parser
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+#endif
+
+#include <stdint.h>                      /* standard types definitions                      */
+#include <core_cmInstr.h>                /* Core Instruction Access                         */
+#include <core_cmFunc.h>                 /* Core Function Access                            */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM0PLUS_REV
+    #define __CM0PLUS_REV             0x0000
+    #warning "__CM0PLUS_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __VTOR_PRESENT
+    #define __VTOR_PRESENT            0
+    #warning "__VTOR_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+    \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_CORE  Status and Control Registers
+    \brief  Core Register type definitions.
+  @{
+ */
+
+/** \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved                           */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31                                             /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30                                             /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29                                             /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28                                             /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/** \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0                                             /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved                           */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0)          */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved                           */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31                                             /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30                                             /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29                                             /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28                                             /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24                                             /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0                                             /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used                   */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1                                             /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0                                             /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+    \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IO uint32_t ISER[1];                 /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register           */
+       uint32_t RESERVED0[31];
+  __IO uint32_t ICER[1];                 /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register          */
+       uint32_t RSERVED1[31];
+  __IO uint32_t ISPR[1];                 /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register           */
+       uint32_t RESERVED2[31];
+  __IO uint32_t ICPR[1];                 /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register         */
+       uint32_t RESERVED3[31];
+       uint32_t RESERVED4[64];
+  __IO uint32_t IP[8];                   /*!< Offset: 0x300 (R/W)  Interrupt Priority Register              */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCB     System Control Block (SCB)
+    \brief      Type definitions for the System Control Block Registers
+  @{
+ */
+
+/** \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __I  uint32_t CPUID;                   /*!< Offset: 0x000 (R/ )  CPUID Base Register                                   */
+  __IO uint32_t ICSR;                    /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register                  */
+#if (__VTOR_PRESENT == 1)
+  __IO uint32_t VTOR;                    /*!< Offset: 0x008 (R/W)  Vector Table Offset Register                          */
+#else
+       uint32_t RESERVED0;
+#endif
+  __IO uint32_t AIRCR;                   /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register      */
+  __IO uint32_t SCR;                     /*!< Offset: 0x010 (R/W)  System Control Register                               */
+  __IO uint32_t CCR;                     /*!< Offset: 0x014 (R/W)  Configuration Control Register                        */
+       uint32_t RESERVED1;
+  __IO uint32_t SHP[2];                  /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED   */
+  __IO uint32_t SHCSR;                   /*!< Offset: 0x024 (R/W)  System Handler Control and State Register             */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24                                             /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20                                             /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16                                             /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4                                             /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0                                             /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31                                             /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28                                             /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27                                             /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26                                             /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25                                             /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23                                             /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22                                             /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12                                             /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0                                             /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 8                                             /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos)            /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16                                             /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16                                             /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15                                             /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2                                             /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1                                             /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4                                             /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2                                             /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1                                             /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9                                             /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3                                             /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15                                             /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+    \brief      Type definitions for the System Timer Registers.
+  @{
+ */
+
+/** \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                    /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                     /*!< Offset: 0x008 (R/W)  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                   /*!< Offset: 0x00C (R/ )  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+    \brief      Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/** \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __I  uint32_t TYPE;                    /*!< Offset: 0x000 (R/ )  MPU Type Register                              */
+  __IO uint32_t CTRL;                    /*!< Offset: 0x004 (R/W)  MPU Control Register                           */
+  __IO uint32_t RNR;                     /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register                     */
+  __IO uint32_t RBAR;                    /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register               */
+  __IO uint32_t RASR;                    /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register         */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos               16                                             /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8                                             /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0                                             /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos             2                                             /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1                                             /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0                                             /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos                  0                                             /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos                   8                                             /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0xFFFFFFUL << MPU_RBAR_ADDR_Pos)              /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4                                             /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0                                             /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos                 16                                             /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28                                             /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24                                             /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19                                             /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18                                             /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17                                             /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16                                             /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8                                             /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1                                             /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0                                             /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+    \brief      Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+                are only accessible over DAP and not via processor. Therefore
+                they are not covered by the Cortex-M0 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_core_base     Core Definitions
+    \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address              */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address                 */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct           */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct       */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct          */
+
+#if (__MPU_PRESENT == 1)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit             */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit             */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+    \brief      Functions that manage interrupts and exceptions via the NVIC.
+    @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M                   */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+
+/** \brief  Enable External Interrupt
+
+    The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Disable External Interrupt
+
+    The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Get Pending Interrupt
+
+    The function reads the pending register in the NVIC and returns the pending bit
+    for the specified interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not pending.
+    \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->ISPR[0] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief  Set Pending Interrupt
+
+    The function sets the pending bit of an external interrupt.
+
+    \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Clear Pending Interrupt
+
+    The function clears the pending bit of an external interrupt.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Set Interrupt Priority
+
+    The function sets the priority of an interrupt.
+
+    \note The priority cannot be set for every core interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+    \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if((int32_t)(IRQn) < 0) {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/** \brief  Get Interrupt Priority
+
+    The function reads the priority of an interrupt. The interrupt
+    number can be positive to specify an external (device specific)
+    interrupt, or negative to specify an internal (core) interrupt.
+
+
+    \param [in]   IRQn  Interrupt number.
+    \return             Interrupt Priority. Value is aligned automatically to the implemented
+                        priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if((int32_t)(IRQn) < 0) {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+  }
+  else {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/** \brief  System Reset
+
+    The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                     /* Ensure all outstanding memory accesses included
+                                                                  buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                     /* Ensure completion of memory access */
+  while(1) { __NOP(); }                                        /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+    \brief      Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief  System Tick Configuration
+
+    The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+    Counter is in free running mode to generate periodic interrupts.
+
+    \param [in]  ticks  Number of ticks between two interrupts.
+
+    \return          0  Function succeeded.
+    \return          1  Function failed.
+
+    \note     When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+    function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+    must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) {return (1UL);}      /* Reload value impossible */
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_cm3.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1693 @@
+/**************************************************************************//**
+ * @file     core_cm3.h
+ * @brief    CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version  V4.10
+ * @date     18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+  @{
+ */
+
+/*  CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN  (0x04)                                   /*!< [31:16] CMSIS HAL main version   */
+#define __CM3_CMSIS_VERSION_SUB   (0x00)                                   /*!< [15:0]  CMSIS HAL sub version    */
+#define __CM3_CMSIS_VERSION       ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+                                    __CM3_CMSIS_VERSION_SUB          )     /*!< CMSIS HAL version number         */
+
+#define __CORTEX_M                (0x03)                                   /*!< Cortex-M Core                    */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TMS470__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __CSMC__ )
+  #define __packed
+  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler      */
+  #define __INLINE         inline                                    /*use -pc99 on compile line !< inline keyword for COSMIC Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TMS470__ )
+  #if defined __TI__VFP_SUPPORT____
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )		/* Cosmic */
+  #if ( __CSMC__ & 0x400)		// FPU present for parser
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+#endif
+
+#include <stdint.h>                      /* standard types definitions                      */
+#include <core_cmInstr.h>                /* Core Instruction Access                         */
+#include <core_cmFunc.h>                 /* Core Function Access                            */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM3_REV
+    #define __CM3_REV               0x0200
+    #warning "__CM3_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          4
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+    \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_CORE  Status and Control Registers
+    \brief  Core Register type definitions.
+  @{
+ */
+
+/** \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:27;              /*!< bit:  0..26  Reserved                           */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31                                             /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30                                             /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29                                             /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28                                             /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27                                             /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+
+/** \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0                                             /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved                           */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0)          */
+    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0)          */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31                                             /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30                                             /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29                                             /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28                                             /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27                                             /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos                        25                                             /*!< xPSR: IT Position */
+#define xPSR_IT_Msk                        (3UL << xPSR_IT_Pos)                           /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos                         24                                             /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0                                             /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used                   */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1                                             /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0                                             /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+    \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IO uint32_t ISER[8];                 /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register           */
+       uint32_t RESERVED0[24];
+  __IO uint32_t ICER[8];                 /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register         */
+       uint32_t RSERVED1[24];
+  __IO uint32_t ISPR[8];                 /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register          */
+       uint32_t RESERVED2[24];
+  __IO uint32_t ICPR[8];                 /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register        */
+       uint32_t RESERVED3[24];
+  __IO uint32_t IABR[8];                 /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register           */
+       uint32_t RESERVED4[56];
+  __IO uint8_t  IP[240];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+       uint32_t RESERVED5[644];
+  __O  uint32_t STIR;                    /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register     */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0                                          /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCB     System Control Block (SCB)
+    \brief      Type definitions for the System Control Block Registers
+  @{
+ */
+
+/** \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __I  uint32_t CPUID;                   /*!< Offset: 0x000 (R/ )  CPUID Base Register                                   */
+  __IO uint32_t ICSR;                    /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register                  */
+  __IO uint32_t VTOR;                    /*!< Offset: 0x008 (R/W)  Vector Table Offset Register                          */
+  __IO uint32_t AIRCR;                   /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register      */
+  __IO uint32_t SCR;                     /*!< Offset: 0x010 (R/W)  System Control Register                               */
+  __IO uint32_t CCR;                     /*!< Offset: 0x014 (R/W)  Configuration Control Register                        */
+  __IO uint8_t  SHP[12];                 /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IO uint32_t SHCSR;                   /*!< Offset: 0x024 (R/W)  System Handler Control and State Register             */
+  __IO uint32_t CFSR;                    /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register                    */
+  __IO uint32_t HFSR;                    /*!< Offset: 0x02C (R/W)  HardFault Status Register                             */
+  __IO uint32_t DFSR;                    /*!< Offset: 0x030 (R/W)  Debug Fault Status Register                           */
+  __IO uint32_t MMFAR;                   /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register                      */
+  __IO uint32_t BFAR;                    /*!< Offset: 0x038 (R/W)  BusFault Address Register                             */
+  __IO uint32_t AFSR;                    /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register                       */
+  __I  uint32_t PFR[2];                  /*!< Offset: 0x040 (R/ )  Processor Feature Register                            */
+  __I  uint32_t DFR;                     /*!< Offset: 0x048 (R/ )  Debug Feature Register                                */
+  __I  uint32_t ADR;                     /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register                            */
+  __I  uint32_t MMFR[4];                 /*!< Offset: 0x050 (R/ )  Memory Model Feature Register                         */
+  __I  uint32_t ISAR[5];                 /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register                   */
+       uint32_t RESERVED0[5];
+  __IO uint32_t CPACR;                   /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register                   */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24                                             /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20                                             /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16                                             /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4                                             /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0                                             /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31                                             /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28                                             /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27                                             /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26                                             /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25                                             /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23                                             /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22                                             /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12                                             /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11                                             /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0                                             /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201)                   /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos               29                                             /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk               (1UL << SCB_VTOR_TBLBASE_Pos)                  /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos                 7                                             /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos)            /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos                 7                                             /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16                                             /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16                                             /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15                                             /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8                                             /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2                                             /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1                                             /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos             0                                             /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk            (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/)           /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4                                             /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2                                             /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1                                             /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9                                             /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8                                             /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4                                             /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3                                             /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1                                             /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos          0                                             /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk         (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/)        /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos          18                                             /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17                                             /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16                                             /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15                                             /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14                                             /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13                                             /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12                                             /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11                                             /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10                                             /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8                                             /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7                                             /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3                                             /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1                                             /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0                                             /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16                                             /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8                                             /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0                                             /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31                                             /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30                                             /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1                                             /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4                                             /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3                                             /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2                                             /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1                                             /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0                                             /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+    \brief      Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/** \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+       uint32_t RESERVED0[1];
+  __I  uint32_t ICTR;                    /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register      */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+  __IO uint32_t ACTLR;                   /*!< Offset: 0x008 (R/W)  Auxiliary Control Register      */
+#else
+       uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0                                          /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos            2                                          /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk           (1UL << SCnSCB_ACTLR_DISFOLD_Pos)           /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos         1                                          /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk        (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos)        /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos         0                                          /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk        (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/)    /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+    \brief      Type definitions for the System Timer Registers.
+  @{
+ */
+
+/** \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                    /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                     /*!< Offset: 0x008 (R/W)  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                   /*!< Offset: 0x00C (R/ )  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+    \brief      Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/** \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __O  union
+  {
+    __O  uint8_t    u8;                  /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit                   */
+    __O  uint16_t   u16;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit                  */
+    __O  uint32_t   u32;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit                  */
+  }  PORT [32];                          /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers               */
+       uint32_t RESERVED0[864];
+  __IO uint32_t TER;                     /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register                 */
+       uint32_t RESERVED1[15];
+  __IO uint32_t TPR;                     /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register              */
+       uint32_t RESERVED2[15];
+  __IO uint32_t TCR;                     /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register                */
+       uint32_t RESERVED3[29];
+  __O  uint32_t IWR;                     /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register            */
+  __I  uint32_t IRR;                     /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register             */
+  __IO uint32_t IMCR;                    /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register     */
+       uint32_t RESERVED4[43];
+  __O  uint32_t LAR;                     /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register                  */
+  __I  uint32_t LSR;                     /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register                  */
+       uint32_t RESERVED5[6];
+  __I  uint32_t PID4;                    /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __I  uint32_t PID5;                    /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __I  uint32_t PID6;                    /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __I  uint32_t PID7;                    /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __I  uint32_t PID0;                    /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __I  uint32_t PID1;                    /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __I  uint32_t PID2;                    /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __I  uint32_t PID3;                    /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __I  uint32_t CID0;                    /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __I  uint32_t CID1;                    /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __I  uint32_t CID2;                    /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __I  uint32_t CID3;                    /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0                                             /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/)            /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23                                             /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos             16                                             /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk             (0x7FUL << ITM_TCR_TraceBusID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10                                             /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos              8                                             /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk             (3UL << ITM_TCR_TSPrescale_Pos)                /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4                                             /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3                                             /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2                                             /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1                                             /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0                                             /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0                                             /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0                                             /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0                                             /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2                                             /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1                                             /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0                                             /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+    \brief      Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/** \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  Control Register                          */
+  __IO uint32_t CYCCNT;                  /*!< Offset: 0x004 (R/W)  Cycle Count Register                      */
+  __IO uint32_t CPICNT;                  /*!< Offset: 0x008 (R/W)  CPI Count Register                        */
+  __IO uint32_t EXCCNT;                  /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register         */
+  __IO uint32_t SLEEPCNT;                /*!< Offset: 0x010 (R/W)  Sleep Count Register                      */
+  __IO uint32_t LSUCNT;                  /*!< Offset: 0x014 (R/W)  LSU Count Register                        */
+  __IO uint32_t FOLDCNT;                 /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register         */
+  __I  uint32_t PCSR;                    /*!< Offset: 0x01C (R/ )  Program Counter Sample Register           */
+  __IO uint32_t COMP0;                   /*!< Offset: 0x020 (R/W)  Comparator Register 0                     */
+  __IO uint32_t MASK0;                   /*!< Offset: 0x024 (R/W)  Mask Register 0                           */
+  __IO uint32_t FUNCTION0;               /*!< Offset: 0x028 (R/W)  Function Register 0                       */
+       uint32_t RESERVED0[1];
+  __IO uint32_t COMP1;                   /*!< Offset: 0x030 (R/W)  Comparator Register 1                     */
+  __IO uint32_t MASK1;                   /*!< Offset: 0x034 (R/W)  Mask Register 1                           */
+  __IO uint32_t FUNCTION1;               /*!< Offset: 0x038 (R/W)  Function Register 1                       */
+       uint32_t RESERVED1[1];
+  __IO uint32_t COMP2;                   /*!< Offset: 0x040 (R/W)  Comparator Register 2                     */
+  __IO uint32_t MASK2;                   /*!< Offset: 0x044 (R/W)  Mask Register 2                           */
+  __IO uint32_t FUNCTION2;               /*!< Offset: 0x048 (R/W)  Function Register 2                       */
+       uint32_t RESERVED2[1];
+  __IO uint32_t COMP3;                   /*!< Offset: 0x050 (R/W)  Comparator Register 3                     */
+  __IO uint32_t MASK3;                   /*!< Offset: 0x054 (R/W)  Mask Register 3                           */
+  __IO uint32_t FUNCTION3;               /*!< Offset: 0x058 (R/W)  Function Register 3                       */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28                                          /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27                                          /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26                                          /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25                                          /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24                                          /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22                                          /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21                                          /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20                                          /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19                                          /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18                                          /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17                                          /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16                                          /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12                                          /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10                                          /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9                                          /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5                                          /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1                                          /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0                                          /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0                                          /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0                                          /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0                                          /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0                                          /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0                                          /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos                   0                                          /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk                  (0x1FUL /*<< DWT_MASK_MASK_Pos*/)           /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos           24                                          /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos        16                                          /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos)      /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos        12                                          /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos)      /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10                                          /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos            9                                          /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk           (0x1UL << DWT_FUNCTION_LNK1ENA_Pos)         /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos         8                                          /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk        (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos)      /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos           7                                          /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk          (0x1UL << DWT_FUNCTION_CYCMATCH_Pos)        /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos          5                                          /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk         (0x1UL << DWT_FUNCTION_EMITRANGE_Pos)       /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos           0                                          /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk          (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/)    /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+    \brief      Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/** \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IO uint32_t SSPSR;                   /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register     */
+  __IO uint32_t CSPSR;                   /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+       uint32_t RESERVED0[2];
+  __IO uint32_t ACPR;                    /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+       uint32_t RESERVED1[55];
+  __IO uint32_t SPPR;                    /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+       uint32_t RESERVED2[131];
+  __I  uint32_t FFSR;                    /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IO uint32_t FFCR;                    /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __I  uint32_t FSCR;                    /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
+       uint32_t RESERVED3[759];
+  __I  uint32_t TRIGGER;                 /*!< Offset: 0xEE8 (R/ )  TRIGGER */
+  __I  uint32_t FIFO0;                   /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
+  __I  uint32_t ITATBCTR2;               /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
+       uint32_t RESERVED4[1];
+  __I  uint32_t ITATBCTR0;               /*!< Offset: 0xEF8 (R/ )  ITATBCTR0 */
+  __I  uint32_t FIFO1;                   /*!< Offset: 0xEFC (R/ )  Integration ITM Data */
+  __IO uint32_t ITCTRL;                  /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+       uint32_t RESERVED5[39];
+  __IO uint32_t CLAIMSET;                /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IO uint32_t CLAIMCLR;                /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+       uint32_t RESERVED7[8];
+  __I  uint32_t DEVID;                   /*!< Offset: 0xFC8 (R/ )  TPIU_DEVID */
+  __I  uint32_t DEVTYPE;                 /*!< Offset: 0xFCC (R/ )  TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0                                          /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0                                          /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3                                          /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2                                          /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1                                          /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0                                          /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8                                          /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1                                          /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0                                          /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos          29                                          /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos)        /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos        27                                          /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk        (0x3UL << TPI_FIFO0_ITM_bytecount_Pos)      /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos          26                                          /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos)        /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos        24                                          /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk        (0x3UL << TPI_FIFO0_ETM_bytecount_Pos)      /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos                 16                                          /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk                 (0xFFUL << TPI_FIFO0_ETM2_Pos)              /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos                  8                                          /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk                 (0xFFUL << TPI_FIFO0_ETM1_Pos)              /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos                  0                                          /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos           0                                          /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/)    /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos          29                                          /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos)        /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos        27                                          /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk        (0x3UL << TPI_FIFO1_ITM_bytecount_Pos)      /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos          26                                          /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos)        /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos        24                                          /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk        (0x3UL << TPI_FIFO1_ETM_bytecount_Pos)      /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos                 16                                          /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk                 (0xFFUL << TPI_FIFO1_ITM2_Pos)              /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos                  8                                          /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk                 (0xFFUL << TPI_FIFO1_ITM1_Pos)              /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos                  0                                          /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos           0                                          /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/)    /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0                                          /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11                                          /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10                                          /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9                                          /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos              6                                          /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk             (0x7UL << TPI_DEVID_MinBufSz_Pos)           /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos             5                                          /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk            (0x1UL << TPI_DEVID_AsynClkIn_Pos)          /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0                                          /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos           4                                          /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos             0                                          /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+    \brief      Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/** \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __I  uint32_t TYPE;                    /*!< Offset: 0x000 (R/ )  MPU Type Register                              */
+  __IO uint32_t CTRL;                    /*!< Offset: 0x004 (R/W)  MPU Control Register                           */
+  __IO uint32_t RNR;                     /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register                     */
+  __IO uint32_t RBAR;                    /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register               */
+  __IO uint32_t RASR;                    /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register         */
+  __IO uint32_t RBAR_A1;                 /*!< Offset: 0x014 (R/W)  MPU Alias 1 Region Base Address Register       */
+  __IO uint32_t RASR_A1;                 /*!< Offset: 0x018 (R/W)  MPU Alias 1 Region Attribute and Size Register */
+  __IO uint32_t RBAR_A2;                 /*!< Offset: 0x01C (R/W)  MPU Alias 2 Region Base Address Register       */
+  __IO uint32_t RASR_A2;                 /*!< Offset: 0x020 (R/W)  MPU Alias 2 Region Attribute and Size Register */
+  __IO uint32_t RBAR_A3;                 /*!< Offset: 0x024 (R/W)  MPU Alias 3 Region Base Address Register       */
+  __IO uint32_t RASR_A3;                 /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos               16                                             /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8                                             /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0                                             /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos             2                                             /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1                                             /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0                                             /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos                  0                                             /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos                   5                                             /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos)             /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4                                             /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0                                             /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos                 16                                             /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28                                             /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24                                             /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19                                             /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18                                             /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17                                             /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16                                             /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8                                             /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1                                             /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0                                             /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+    \brief      Type definitions for the Core Debug Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IO uint32_t DHCSR;                   /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register    */
+  __O  uint32_t DCRSR;                   /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register        */
+  __IO uint32_t DCRDR;                   /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register            */
+  __IO uint32_t DEMCR;                   /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16                                             /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25                                             /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24                                             /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19                                             /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18                                             /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17                                             /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16                                             /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5                                             /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3                                             /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2                                             /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1                                             /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0                                             /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos         16                                             /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0                                             /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos         24                                             /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19                                             /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18                                             /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17                                             /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16                                             /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10                                             /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9                                             /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8                                             /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7                                             /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6                                             /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5                                             /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4                                             /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0                                             /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_core_base     Core Definitions
+    \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address  */
+#define ITM_BASE            (0xE0000000UL)                            /*!< ITM Base Address                   */
+#define DWT_BASE            (0xE0001000UL)                            /*!< DWT Base Address                   */
+#define TPI_BASE            (0xE0040000UL)                            /*!< TPI Base Address                   */
+#define CoreDebug_BASE      (0xE000EDF0UL)                            /*!< Core Debug Base Address            */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address               */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address                  */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address  */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct           */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct       */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct          */
+#define ITM                 ((ITM_Type       *)     ITM_BASE      )   /*!< ITM configuration struct           */
+#define DWT                 ((DWT_Type       *)     DWT_BASE      )   /*!< DWT configuration struct           */
+#define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct           */
+#define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct    */
+
+#if (__MPU_PRESENT == 1)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit             */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit             */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+    \brief      Functions that manage interrupts and exceptions via the NVIC.
+    @{
+ */
+
+/** \brief  Set Priority Grouping
+
+  The function sets the priority grouping field using the required unlock sequence.
+  The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+  Only values from 0..7 are used.
+  In case of a conflict between priority grouping and available
+  priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+    \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk));             /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << 8)                       );              /* Insert write key and priorty group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/** \brief  Get Priority Grouping
+
+  The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+    \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/** \brief  Enable External Interrupt
+
+    The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Disable External Interrupt
+
+    The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Get Pending Interrupt
+
+    The function reads the pending register in the NVIC and returns the pending bit
+    for the specified interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not pending.
+    \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief  Set Pending Interrupt
+
+    The function sets the pending bit of an external interrupt.
+
+    \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Clear Pending Interrupt
+
+    The function clears the pending bit of an external interrupt.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Get Active Interrupt
+
+    The function reads the active register in NVIC and returns the active bit.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not active.
+    \return             1  Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief  Set Interrupt Priority
+
+    The function sets the priority of an interrupt.
+
+    \note The priority cannot be set for every core interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+    \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if((int32_t)IRQn < 0) {
+    SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else {
+    NVIC->IP[((uint32_t)(int32_t)IRQn)]               = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/** \brief  Get Interrupt Priority
+
+    The function reads the priority of an interrupt. The interrupt
+    number can be positive to specify an external (device specific)
+    interrupt, or negative to specify an internal (core) interrupt.
+
+
+    \param [in]   IRQn  Interrupt number.
+    \return             Interrupt Priority. Value is aligned automatically to the implemented
+                        priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if((int32_t)IRQn < 0) {
+    return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8 - __NVIC_PRIO_BITS)));
+  }
+  else {
+    return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)]               >> (8 - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/** \brief  Encode Priority
+
+    The function encodes the priority for an interrupt with the given priority group,
+    preemptive priority value, and subpriority value.
+    In case of a conflict between priority grouping and available
+    priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+    \param [in]     PriorityGroup  Used priority group.
+    \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+    \param [in]       SubPriority  Subpriority value (starting from 0).
+    \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/** \brief  Decode Priority
+
+    The function decodes an interrupt priority value with a given priority group to
+    preemptive priority value and subpriority value.
+    In case of a conflict between priority grouping and available
+    priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+
+    \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+    \param [in]     PriorityGroup  Used priority group.
+    \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+    \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/** \brief  System Reset
+
+    The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+  while(1) { __NOP(); }                                             /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+    \brief      Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief  System Tick Configuration
+
+    The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+    Counter is in free running mode to generate periodic interrupts.
+
+    \param [in]  ticks  Number of ticks between two interrupts.
+
+    \return          0  Function succeeded.
+    \return          1  Function failed.
+
+    \note     When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+    function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+    must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); }    /* Reload value impossible */
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_core_DebugFunctions ITM Functions
+    \brief   Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                    /*!< External variable to receive characters.                         */
+#define                 ITM_RXBUFFER_EMPTY    0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief  ITM Send Character
+
+    The function transmits a character via the ITM channel 0, and
+    \li Just returns when no debugger is connected that has booked the output.
+    \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+    \param [in]     ch  Character to transmit.
+
+    \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0].u32 == 0UL) { __NOP(); }
+    ITM->PORT[0].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/** \brief  ITM Receive Character
+
+    The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+    \return             Received character.
+    \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/** \brief  ITM Check Character
+
+    The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+    \return          0  No character available.
+    \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+    return (0);                                 /* no character available */
+  } else {
+    return (1);                                 /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_cm4.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1858 @@
+/**************************************************************************//**
+ * @file     core_cm4.h
+ * @brief    CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version  V4.10
+ * @date     18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+  @{
+ */
+
+/*  CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN  (0x04)                                   /*!< [31:16] CMSIS HAL main version   */
+#define __CM4_CMSIS_VERSION_SUB   (0x00)                                   /*!< [15:0]  CMSIS HAL sub version    */
+#define __CM4_CMSIS_VERSION       ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+                                    __CM4_CMSIS_VERSION_SUB          )     /*!< CMSIS HAL version number         */
+
+#define __CORTEX_M                (0x04)                                   /*!< Cortex-M Core                    */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TMS470__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __CSMC__ )
+  #define __packed
+  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler      */
+  #define __INLINE         inline                                    /*use -pc99 on compile line !< inline keyword for COSMIC Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __TMS470__ )
+  #if defined __TI_VFP_SUPPORT__
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __CSMC__ )		/* Cosmic */
+  #if ( __CSMC__ & 0x400)		// FPU present for parser
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+#endif
+
+#include <stdint.h>                      /* standard types definitions                      */
+#include <core_cmInstr.h>                /* Core Instruction Access                         */
+#include <core_cmFunc.h>                 /* Core Function Access                            */
+#include <core_cmSimd.h>                 /* Compiler specific SIMD Intrinsics               */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM4_REV
+    #define __CM4_REV               0x0000
+    #warning "__CM4_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          4
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+    \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_CORE  Status and Control Registers
+    \brief  Core Register type definitions.
+  @{
+ */
+
+/** \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved                           */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31                                             /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30                                             /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29                                             /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28                                             /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27                                             /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos                        16                                             /*!< APSR: GE Position */
+#define APSR_GE_Msk                        (0xFUL << APSR_GE_Pos)                         /*!< APSR: GE Mask */
+
+
+/** \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0                                             /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:7;               /*!< bit:  9..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved                           */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0)          */
+    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0)          */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31                                             /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30                                             /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29                                             /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28                                             /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27                                             /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos                        25                                             /*!< xPSR: IT Position */
+#define xPSR_IT_Msk                        (3UL << xPSR_IT_Pos)                           /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos                         24                                             /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos                        16                                             /*!< xPSR: GE Position */
+#define xPSR_GE_Msk                        (0xFUL << xPSR_GE_Pos)                         /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos                        0                                             /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used                   */
+    uint32_t FPCA:1;                     /*!< bit:      2  FP extension active flag           */
+    uint32_t _reserved0:29;              /*!< bit:  3..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos                    2                                             /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk                   (1UL << CONTROL_FPCA_Pos)                      /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos                   1                                             /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0                                             /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+    \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IO uint32_t ISER[8];                 /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register           */
+       uint32_t RESERVED0[24];
+  __IO uint32_t ICER[8];                 /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register         */
+       uint32_t RSERVED1[24];
+  __IO uint32_t ISPR[8];                 /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register          */
+       uint32_t RESERVED2[24];
+  __IO uint32_t ICPR[8];                 /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register        */
+       uint32_t RESERVED3[24];
+  __IO uint32_t IABR[8];                 /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register           */
+       uint32_t RESERVED4[56];
+  __IO uint8_t  IP[240];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+       uint32_t RESERVED5[644];
+  __O  uint32_t STIR;                    /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register     */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0                                          /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCB     System Control Block (SCB)
+    \brief      Type definitions for the System Control Block Registers
+  @{
+ */
+
+/** \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __I  uint32_t CPUID;                   /*!< Offset: 0x000 (R/ )  CPUID Base Register                                   */
+  __IO uint32_t ICSR;                    /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register                  */
+  __IO uint32_t VTOR;                    /*!< Offset: 0x008 (R/W)  Vector Table Offset Register                          */
+  __IO uint32_t AIRCR;                   /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register      */
+  __IO uint32_t SCR;                     /*!< Offset: 0x010 (R/W)  System Control Register                               */
+  __IO uint32_t CCR;                     /*!< Offset: 0x014 (R/W)  Configuration Control Register                        */
+  __IO uint8_t  SHP[12];                 /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IO uint32_t SHCSR;                   /*!< Offset: 0x024 (R/W)  System Handler Control and State Register             */
+  __IO uint32_t CFSR;                    /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register                    */
+  __IO uint32_t HFSR;                    /*!< Offset: 0x02C (R/W)  HardFault Status Register                             */
+  __IO uint32_t DFSR;                    /*!< Offset: 0x030 (R/W)  Debug Fault Status Register                           */
+  __IO uint32_t MMFAR;                   /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register                      */
+  __IO uint32_t BFAR;                    /*!< Offset: 0x038 (R/W)  BusFault Address Register                             */
+  __IO uint32_t AFSR;                    /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register                       */
+  __I  uint32_t PFR[2];                  /*!< Offset: 0x040 (R/ )  Processor Feature Register                            */
+  __I  uint32_t DFR;                     /*!< Offset: 0x048 (R/ )  Debug Feature Register                                */
+  __I  uint32_t ADR;                     /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register                            */
+  __I  uint32_t MMFR[4];                 /*!< Offset: 0x050 (R/ )  Memory Model Feature Register                         */
+  __I  uint32_t ISAR[5];                 /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register                   */
+       uint32_t RESERVED0[5];
+  __IO uint32_t CPACR;                   /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register                   */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24                                             /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20                                             /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16                                             /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4                                             /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0                                             /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31                                             /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28                                             /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27                                             /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26                                             /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25                                             /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23                                             /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22                                             /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12                                             /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11                                             /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0                                             /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7                                             /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16                                             /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16                                             /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15                                             /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8                                             /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2                                             /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1                                             /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos             0                                             /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk            (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/)           /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4                                             /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2                                             /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1                                             /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9                                             /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8                                             /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4                                             /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3                                             /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1                                             /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos          0                                             /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk         (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/)        /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos          18                                             /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17                                             /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16                                             /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15                                             /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14                                             /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13                                             /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12                                             /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11                                             /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10                                             /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8                                             /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7                                             /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3                                             /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1                                             /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0                                             /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16                                             /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8                                             /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0                                             /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31                                             /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30                                             /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1                                             /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4                                             /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3                                             /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2                                             /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1                                             /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0                                             /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+    \brief      Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/** \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+       uint32_t RESERVED0[1];
+  __I  uint32_t ICTR;                    /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register      */
+  __IO uint32_t ACTLR;                   /*!< Offset: 0x008 (R/W)  Auxiliary Control Register              */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0                                          /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos            9                                          /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk           (1UL << SCnSCB_ACTLR_DISOOFP_Pos)           /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos            8                                          /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk           (1UL << SCnSCB_ACTLR_DISFPCA_Pos)           /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos            2                                          /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk           (1UL << SCnSCB_ACTLR_DISFOLD_Pos)           /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos         1                                          /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk        (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos)        /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos         0                                          /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk        (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/)    /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+    \brief      Type definitions for the System Timer Registers.
+  @{
+ */
+
+/** \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                    /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                     /*!< Offset: 0x008 (R/W)  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                   /*!< Offset: 0x00C (R/ )  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+    \brief      Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/** \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __O  union
+  {
+    __O  uint8_t    u8;                  /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit                   */
+    __O  uint16_t   u16;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit                  */
+    __O  uint32_t   u32;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit                  */
+  }  PORT [32];                          /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers               */
+       uint32_t RESERVED0[864];
+  __IO uint32_t TER;                     /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register                 */
+       uint32_t RESERVED1[15];
+  __IO uint32_t TPR;                     /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register              */
+       uint32_t RESERVED2[15];
+  __IO uint32_t TCR;                     /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register                */
+       uint32_t RESERVED3[29];
+  __O  uint32_t IWR;                     /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register            */
+  __I  uint32_t IRR;                     /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register             */
+  __IO uint32_t IMCR;                    /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register     */
+       uint32_t RESERVED4[43];
+  __O  uint32_t LAR;                     /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register                  */
+  __I  uint32_t LSR;                     /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register                  */
+       uint32_t RESERVED5[6];
+  __I  uint32_t PID4;                    /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __I  uint32_t PID5;                    /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __I  uint32_t PID6;                    /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __I  uint32_t PID7;                    /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __I  uint32_t PID0;                    /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __I  uint32_t PID1;                    /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __I  uint32_t PID2;                    /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __I  uint32_t PID3;                    /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __I  uint32_t CID0;                    /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __I  uint32_t CID1;                    /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __I  uint32_t CID2;                    /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __I  uint32_t CID3;                    /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0                                             /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/)            /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23                                             /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos             16                                             /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk             (0x7FUL << ITM_TCR_TraceBusID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10                                             /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos              8                                             /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk             (3UL << ITM_TCR_TSPrescale_Pos)                /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4                                             /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3                                             /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2                                             /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1                                             /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0                                             /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0                                             /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0                                             /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0                                             /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2                                             /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1                                             /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0                                             /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+    \brief      Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/** \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  Control Register                          */
+  __IO uint32_t CYCCNT;                  /*!< Offset: 0x004 (R/W)  Cycle Count Register                      */
+  __IO uint32_t CPICNT;                  /*!< Offset: 0x008 (R/W)  CPI Count Register                        */
+  __IO uint32_t EXCCNT;                  /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register         */
+  __IO uint32_t SLEEPCNT;                /*!< Offset: 0x010 (R/W)  Sleep Count Register                      */
+  __IO uint32_t LSUCNT;                  /*!< Offset: 0x014 (R/W)  LSU Count Register                        */
+  __IO uint32_t FOLDCNT;                 /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register         */
+  __I  uint32_t PCSR;                    /*!< Offset: 0x01C (R/ )  Program Counter Sample Register           */
+  __IO uint32_t COMP0;                   /*!< Offset: 0x020 (R/W)  Comparator Register 0                     */
+  __IO uint32_t MASK0;                   /*!< Offset: 0x024 (R/W)  Mask Register 0                           */
+  __IO uint32_t FUNCTION0;               /*!< Offset: 0x028 (R/W)  Function Register 0                       */
+       uint32_t RESERVED0[1];
+  __IO uint32_t COMP1;                   /*!< Offset: 0x030 (R/W)  Comparator Register 1                     */
+  __IO uint32_t MASK1;                   /*!< Offset: 0x034 (R/W)  Mask Register 1                           */
+  __IO uint32_t FUNCTION1;               /*!< Offset: 0x038 (R/W)  Function Register 1                       */
+       uint32_t RESERVED1[1];
+  __IO uint32_t COMP2;                   /*!< Offset: 0x040 (R/W)  Comparator Register 2                     */
+  __IO uint32_t MASK2;                   /*!< Offset: 0x044 (R/W)  Mask Register 2                           */
+  __IO uint32_t FUNCTION2;               /*!< Offset: 0x048 (R/W)  Function Register 2                       */
+       uint32_t RESERVED2[1];
+  __IO uint32_t COMP3;                   /*!< Offset: 0x050 (R/W)  Comparator Register 3                     */
+  __IO uint32_t MASK3;                   /*!< Offset: 0x054 (R/W)  Mask Register 3                           */
+  __IO uint32_t FUNCTION3;               /*!< Offset: 0x058 (R/W)  Function Register 3                       */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28                                          /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27                                          /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26                                          /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25                                          /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24                                          /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22                                          /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21                                          /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20                                          /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19                                          /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18                                          /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17                                          /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16                                          /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12                                          /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10                                          /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9                                          /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5                                          /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1                                          /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0                                          /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0                                          /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0                                          /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0                                          /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0                                          /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0                                          /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos                   0                                          /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk                  (0x1FUL /*<< DWT_MASK_MASK_Pos*/)           /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos           24                                          /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos        16                                          /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos)      /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos        12                                          /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos)      /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10                                          /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos            9                                          /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk           (0x1UL << DWT_FUNCTION_LNK1ENA_Pos)         /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos         8                                          /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk        (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos)      /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos           7                                          /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk          (0x1UL << DWT_FUNCTION_CYCMATCH_Pos)        /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos          5                                          /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk         (0x1UL << DWT_FUNCTION_EMITRANGE_Pos)       /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos           0                                          /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk          (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/)    /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+    \brief      Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/** \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IO uint32_t SSPSR;                   /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register     */
+  __IO uint32_t CSPSR;                   /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+       uint32_t RESERVED0[2];
+  __IO uint32_t ACPR;                    /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+       uint32_t RESERVED1[55];
+  __IO uint32_t SPPR;                    /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+       uint32_t RESERVED2[131];
+  __I  uint32_t FFSR;                    /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IO uint32_t FFCR;                    /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __I  uint32_t FSCR;                    /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
+       uint32_t RESERVED3[759];
+  __I  uint32_t TRIGGER;                 /*!< Offset: 0xEE8 (R/ )  TRIGGER */
+  __I  uint32_t FIFO0;                   /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
+  __I  uint32_t ITATBCTR2;               /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
+       uint32_t RESERVED4[1];
+  __I  uint32_t ITATBCTR0;               /*!< Offset: 0xEF8 (R/ )  ITATBCTR0 */
+  __I  uint32_t FIFO1;                   /*!< Offset: 0xEFC (R/ )  Integration ITM Data */
+  __IO uint32_t ITCTRL;                  /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+       uint32_t RESERVED5[39];
+  __IO uint32_t CLAIMSET;                /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IO uint32_t CLAIMCLR;                /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+       uint32_t RESERVED7[8];
+  __I  uint32_t DEVID;                   /*!< Offset: 0xFC8 (R/ )  TPIU_DEVID */
+  __I  uint32_t DEVTYPE;                 /*!< Offset: 0xFCC (R/ )  TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0                                          /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0                                          /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3                                          /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2                                          /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1                                          /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0                                          /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8                                          /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1                                          /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0                                          /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos          29                                          /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos)        /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos        27                                          /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk        (0x3UL << TPI_FIFO0_ITM_bytecount_Pos)      /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos          26                                          /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos)        /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos        24                                          /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk        (0x3UL << TPI_FIFO0_ETM_bytecount_Pos)      /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos                 16                                          /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk                 (0xFFUL << TPI_FIFO0_ETM2_Pos)              /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos                  8                                          /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk                 (0xFFUL << TPI_FIFO0_ETM1_Pos)              /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos                  0                                          /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos           0                                          /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/)    /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos          29                                          /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos)        /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos        27                                          /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk        (0x3UL << TPI_FIFO1_ITM_bytecount_Pos)      /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos          26                                          /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos)        /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos        24                                          /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk        (0x3UL << TPI_FIFO1_ETM_bytecount_Pos)      /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos                 16                                          /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk                 (0xFFUL << TPI_FIFO1_ITM2_Pos)              /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos                  8                                          /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk                 (0xFFUL << TPI_FIFO1_ITM1_Pos)              /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos                  0                                          /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos           0                                          /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/)    /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0                                          /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11                                          /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10                                          /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9                                          /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos              6                                          /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk             (0x7UL << TPI_DEVID_MinBufSz_Pos)           /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos             5                                          /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk            (0x1UL << TPI_DEVID_AsynClkIn_Pos)          /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0                                          /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos           4                                          /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos             0                                          /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+    \brief      Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/** \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __I  uint32_t TYPE;                    /*!< Offset: 0x000 (R/ )  MPU Type Register                              */
+  __IO uint32_t CTRL;                    /*!< Offset: 0x004 (R/W)  MPU Control Register                           */
+  __IO uint32_t RNR;                     /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register                     */
+  __IO uint32_t RBAR;                    /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register               */
+  __IO uint32_t RASR;                    /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register         */
+  __IO uint32_t RBAR_A1;                 /*!< Offset: 0x014 (R/W)  MPU Alias 1 Region Base Address Register       */
+  __IO uint32_t RASR_A1;                 /*!< Offset: 0x018 (R/W)  MPU Alias 1 Region Attribute and Size Register */
+  __IO uint32_t RBAR_A2;                 /*!< Offset: 0x01C (R/W)  MPU Alias 2 Region Base Address Register       */
+  __IO uint32_t RASR_A2;                 /*!< Offset: 0x020 (R/W)  MPU Alias 2 Region Attribute and Size Register */
+  __IO uint32_t RBAR_A3;                 /*!< Offset: 0x024 (R/W)  MPU Alias 3 Region Base Address Register       */
+  __IO uint32_t RASR_A3;                 /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos               16                                             /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8                                             /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0                                             /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos             2                                             /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1                                             /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0                                             /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos                  0                                             /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos                   5                                             /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos)             /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4                                             /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0                                             /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos                 16                                             /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28                                             /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24                                             /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19                                             /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18                                             /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17                                             /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16                                             /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8                                             /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1                                             /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0                                             /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_FPU     Floating Point Unit (FPU)
+    \brief      Type definitions for the Floating Point Unit (FPU)
+  @{
+ */
+
+/** \brief  Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+       uint32_t RESERVED0[1];
+  __IO uint32_t FPCCR;                   /*!< Offset: 0x004 (R/W)  Floating-Point Context Control Register               */
+  __IO uint32_t FPCAR;                   /*!< Offset: 0x008 (R/W)  Floating-Point Context Address Register               */
+  __IO uint32_t FPDSCR;                  /*!< Offset: 0x00C (R/W)  Floating-Point Default Status Control Register        */
+  __I  uint32_t MVFR0;                   /*!< Offset: 0x010 (R/ )  Media and FP Feature Register 0                       */
+  __I  uint32_t MVFR1;                   /*!< Offset: 0x014 (R/ )  Media and FP Feature Register 1                       */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos                31                                             /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk                (1UL << FPU_FPCCR_ASPEN_Pos)                   /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos                30                                             /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk                (1UL << FPU_FPCCR_LSPEN_Pos)                   /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos                8                                             /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk               (1UL << FPU_FPCCR_MONRDY_Pos)                  /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos                 6                                             /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk                (1UL << FPU_FPCCR_BFRDY_Pos)                   /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos                 5                                             /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk                (1UL << FPU_FPCCR_MMRDY_Pos)                   /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos                 4                                             /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk                (1UL << FPU_FPCCR_HFRDY_Pos)                   /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos                3                                             /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk               (1UL << FPU_FPCCR_THREAD_Pos)                  /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos                  1                                             /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk                 (1UL << FPU_FPCCR_USER_Pos)                    /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos                0                                             /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk               (1UL /*<< FPU_FPCCR_LSPACT_Pos*/)              /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos               3                                             /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk              (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos)        /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos                 26                                             /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk                 (1UL << FPU_FPDSCR_AHP_Pos)                    /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos                  25                                             /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk                  (1UL << FPU_FPDSCR_DN_Pos)                     /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos                  24                                             /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk                  (1UL << FPU_FPDSCR_FZ_Pos)                     /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos               22                                             /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk               (3UL << FPU_FPDSCR_RMode_Pos)                  /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos    28                                             /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk    (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos)     /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos        24                                             /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk        (0xFUL << FPU_MVFR0_Short_vectors_Pos)         /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos          20                                             /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk          (0xFUL << FPU_MVFR0_Square_root_Pos)           /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos               16                                             /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk               (0xFUL << FPU_MVFR0_Divide_Pos)                /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos    12                                             /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk    (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos)     /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos      8                                             /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk     (0xFUL << FPU_MVFR0_Double_precision_Pos)      /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos      4                                             /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk     (0xFUL << FPU_MVFR0_Single_precision_Pos)      /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos      0                                             /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk     (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/)  /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos         28                                             /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk         (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos)          /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos              24                                             /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk              (0xFUL << FPU_MVFR1_FP_HPFP_Pos)               /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos            4                                             /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk           (0xFUL << FPU_MVFR1_D_NaN_mode_Pos)            /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos              0                                             /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk             (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/)          /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+    \brief      Type definitions for the Core Debug Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IO uint32_t DHCSR;                   /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register    */
+  __O  uint32_t DCRSR;                   /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register        */
+  __IO uint32_t DCRDR;                   /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register            */
+  __IO uint32_t DEMCR;                   /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16                                             /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25                                             /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24                                             /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19                                             /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18                                             /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17                                             /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16                                             /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5                                             /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3                                             /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2                                             /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1                                             /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0                                             /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos         16                                             /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0                                             /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos         24                                             /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19                                             /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18                                             /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17                                             /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16                                             /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10                                             /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9                                             /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8                                             /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7                                             /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6                                             /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5                                             /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4                                             /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0                                             /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_core_base     Core Definitions
+    \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address  */
+#define ITM_BASE            (0xE0000000UL)                            /*!< ITM Base Address                   */
+#define DWT_BASE            (0xE0001000UL)                            /*!< DWT Base Address                   */
+#define TPI_BASE            (0xE0040000UL)                            /*!< TPI Base Address                   */
+#define CoreDebug_BASE      (0xE000EDF0UL)                            /*!< Core Debug Base Address            */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address               */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address                  */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address  */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct           */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct       */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct          */
+#define ITM                 ((ITM_Type       *)     ITM_BASE      )   /*!< ITM configuration struct           */
+#define DWT                 ((DWT_Type       *)     DWT_BASE      )   /*!< DWT configuration struct           */
+#define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct           */
+#define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct    */
+
+#if (__MPU_PRESENT == 1)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit             */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit             */
+#endif
+
+#if (__FPU_PRESENT == 1)
+  #define FPU_BASE          (SCS_BASE +  0x0F30UL)                    /*!< Floating Point Unit                */
+  #define FPU               ((FPU_Type       *)     FPU_BASE      )   /*!< Floating Point Unit                */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+    \brief      Functions that manage interrupts and exceptions via the NVIC.
+    @{
+ */
+
+/** \brief  Set Priority Grouping
+
+  The function sets the priority grouping field using the required unlock sequence.
+  The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+  Only values from 0..7 are used.
+  In case of a conflict between priority grouping and available
+  priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+    \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk));             /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << 8)                       );              /* Insert write key and priorty group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/** \brief  Get Priority Grouping
+
+  The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+    \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/** \brief  Enable External Interrupt
+
+    The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Disable External Interrupt
+
+    The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Get Pending Interrupt
+
+    The function reads the pending register in the NVIC and returns the pending bit
+    for the specified interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not pending.
+    \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief  Set Pending Interrupt
+
+    The function sets the pending bit of an external interrupt.
+
+    \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Clear Pending Interrupt
+
+    The function clears the pending bit of an external interrupt.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Get Active Interrupt
+
+    The function reads the active register in NVIC and returns the active bit.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not active.
+    \return             1  Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief  Set Interrupt Priority
+
+    The function sets the priority of an interrupt.
+
+    \note The priority cannot be set for every core interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+    \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if((int32_t)IRQn < 0) {
+    SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else {
+    NVIC->IP[((uint32_t)(int32_t)IRQn)]               = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/** \brief  Get Interrupt Priority
+
+    The function reads the priority of an interrupt. The interrupt
+    number can be positive to specify an external (device specific)
+    interrupt, or negative to specify an internal (core) interrupt.
+
+
+    \param [in]   IRQn  Interrupt number.
+    \return             Interrupt Priority. Value is aligned automatically to the implemented
+                        priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if((int32_t)IRQn < 0) {
+    return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8 - __NVIC_PRIO_BITS)));
+  }
+  else {
+    return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)]               >> (8 - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/** \brief  Encode Priority
+
+    The function encodes the priority for an interrupt with the given priority group,
+    preemptive priority value, and subpriority value.
+    In case of a conflict between priority grouping and available
+    priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+    \param [in]     PriorityGroup  Used priority group.
+    \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+    \param [in]       SubPriority  Subpriority value (starting from 0).
+    \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/** \brief  Decode Priority
+
+    The function decodes an interrupt priority value with a given priority group to
+    preemptive priority value and subpriority value.
+    In case of a conflict between priority grouping and available
+    priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+
+    \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+    \param [in]     PriorityGroup  Used priority group.
+    \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+    \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/** \brief  System Reset
+
+    The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+  while(1) { __NOP(); }                                             /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+    \brief      Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief  System Tick Configuration
+
+    The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+    Counter is in free running mode to generate periodic interrupts.
+
+    \param [in]  ticks  Number of ticks between two interrupts.
+
+    \return          0  Function succeeded.
+    \return          1  Function failed.
+
+    \note     When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+    function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+    must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); }    /* Reload value impossible */
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_core_DebugFunctions ITM Functions
+    \brief   Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                    /*!< External variable to receive characters.                         */
+#define                 ITM_RXBUFFER_EMPTY    0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief  ITM Send Character
+
+    The function transmits a character via the ITM channel 0, and
+    \li Just returns when no debugger is connected that has booked the output.
+    \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+    \param [in]     ch  Character to transmit.
+
+    \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0].u32 == 0UL) { __NOP(); }
+    ITM->PORT[0].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/** \brief  ITM Receive Character
+
+    The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+    \return             Received character.
+    \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/** \brief  ITM Check Character
+
+    The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+    \return          0  No character available.
+    \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+    return (0);                                 /* no character available */
+  } else {
+    return (1);                                 /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_cm4_simd.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file     core_cm4_simd.h
+ * @brief    CMSIS Cortex-M4 SIMD Header File
+ * @version  V3.20
+ * @date     25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+  Access to dedicated SIMD instructions
+  @{
+*/
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8                           __sadd8
+#define __QADD8                           __qadd8
+#define __SHADD8                          __shadd8
+#define __UADD8                           __uadd8
+#define __UQADD8                          __uqadd8
+#define __UHADD8                          __uhadd8
+#define __SSUB8                           __ssub8
+#define __QSUB8                           __qsub8
+#define __SHSUB8                          __shsub8
+#define __USUB8                           __usub8
+#define __UQSUB8                          __uqsub8
+#define __UHSUB8                          __uhsub8
+#define __SADD16                          __sadd16
+#define __QADD16                          __qadd16
+#define __SHADD16                         __shadd16
+#define __UADD16                          __uadd16
+#define __UQADD16                         __uqadd16
+#define __UHADD16                         __uhadd16
+#define __SSUB16                          __ssub16
+#define __QSUB16                          __qsub16
+#define __SHSUB16                         __shsub16
+#define __USUB16                          __usub16
+#define __UQSUB16                         __uqsub16
+#define __UHSUB16                         __uhsub16
+#define __SASX                            __sasx
+#define __QASX                            __qasx
+#define __SHASX                           __shasx
+#define __UASX                            __uasx
+#define __UQASX                           __uqasx
+#define __UHASX                           __uhasx
+#define __SSAX                            __ssax
+#define __QSAX                            __qsax
+#define __SHSAX                           __shsax
+#define __USAX                            __usax
+#define __UQSAX                           __uqsax
+#define __UHSAX                           __uhsax
+#define __USAD8                           __usad8
+#define __USADA8                          __usada8
+#define __SSAT16                          __ssat16
+#define __USAT16                          __usat16
+#define __UXTB16                          __uxtb16
+#define __UXTAB16                         __uxtab16
+#define __SXTB16                          __sxtb16
+#define __SXTAB16                         __sxtab16
+#define __SMUAD                           __smuad
+#define __SMUADX                          __smuadx
+#define __SMLAD                           __smlad
+#define __SMLADX                          __smladx
+#define __SMLALD                          __smlald
+#define __SMLALDX                         __smlaldx
+#define __SMUSD                           __smusd
+#define __SMUSDX                          __smusdx
+#define __SMLSD                           __smlsd
+#define __SMLSDX                          __smlsdx
+#define __SMLSLD                          __smlsld
+#define __SMLSLDX                         __smlsldx
+#define __SEL                             __sel
+#define __QADD                            __qadd
+#define __QSUB                            __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0x0000FFFFUL) |  \
+                                           ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL)  )
+
+#define __PKHTB(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0xFFFF0000UL) |  \
+                                           ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL)  )
+
+#define __SMMLA(ARG1,ARG2,ARG3)          ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+                                                      ((int64_t)(ARG3) << 32)      ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("usat16 %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+  uint32_t result;
+
+  __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+  uint32_t result;
+
+  __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+  uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+  __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+  (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+  uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+  __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+  (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+  uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+  __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+  (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+  uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+  __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+  (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+  __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2), "I" (ARG3)  ); \
+  __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+  if (ARG3 == 0) \
+    __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2)  ); \
+  else \
+    __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2), "I" (ARG3)  ); \
+  __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r"  (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_cm7.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,2397 @@
+/**************************************************************************//**
+ * @file     core_cm7.h
+ * @brief    CMSIS Cortex-M7 Core Peripheral Access Layer Header File
+ * @version  V4.10
+ * @date     18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM7_H_GENERIC
+#define __CORE_CM7_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M7
+  @{
+ */
+
+/*  CMSIS CM7 definitions */
+#define __CM7_CMSIS_VERSION_MAIN  (0x04)                                   /*!< [31:16] CMSIS HAL main version   */
+#define __CM7_CMSIS_VERSION_SUB   (0x00)                                   /*!< [15:0]  CMSIS HAL sub version    */
+#define __CM7_CMSIS_VERSION       ((__CM7_CMSIS_VERSION_MAIN << 16) | \
+                                    __CM7_CMSIS_VERSION_SUB          )     /*!< CMSIS HAL version number         */
+
+#define __CORTEX_M                (0x07)                                   /*!< Cortex-M Core                    */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TMS470__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __CSMC__ )
+  #define __packed
+  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler      */
+  #define __INLINE         inline                                    /*use -pc99 on compile line !< inline keyword for COSMIC Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __TMS470__ )
+  #if defined __TI_VFP_SUPPORT__
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+
+#elif defined ( __CSMC__ )		/* Cosmic */
+  #if ( __CSMC__ & 0x400)		// FPU present for parser
+    #if (__FPU_PRESENT == 1)
+      #define __FPU_USED       1
+    #else
+      #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+      #define __FPU_USED       0
+    #endif
+  #else
+    #define __FPU_USED         0
+  #endif
+#endif
+
+#include <stdint.h>                      /* standard types definitions                      */
+#include <core_cmInstr.h>                /* Core Instruction Access                         */
+#include <core_cmFunc.h>                 /* Core Function Access                            */
+#include <core_cmSimd.h>                 /* Compiler specific SIMD Intrinsics               */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM7_H_DEPENDANT
+#define __CORE_CM7_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __CM7_REV
+    #define __CM7_REV               0x0000
+    #warning "__CM7_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __FPU_PRESENT
+    #define __FPU_PRESENT             0
+    #warning "__FPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __ICACHE_PRESENT
+    #define __ICACHE_PRESENT          0
+    #warning "__ICACHE_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __DCACHE_PRESENT
+    #define __DCACHE_PRESENT          0
+    #warning "__DCACHE_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __DTCM_PRESENT
+    #define __DTCM_PRESENT            0
+    #warning "__DTCM_PRESENT        not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          3
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*@} end of group Cortex_M7 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+  - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+    \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_CORE  Status and Control Registers
+    \brief  Core Register type definitions.
+  @{
+ */
+
+/** \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:16;              /*!< bit:  0..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t _reserved1:7;               /*!< bit: 20..26  Reserved                           */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31                                             /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30                                             /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29                                             /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28                                             /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27                                             /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+#define APSR_GE_Pos                        16                                             /*!< APSR: GE Position */
+#define APSR_GE_Msk                        (0xFUL << APSR_GE_Pos)                         /*!< APSR: GE Mask */
+
+
+/** \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0                                             /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:7;               /*!< bit:  9..15  Reserved                           */
+    uint32_t GE:4;                       /*!< bit: 16..19  Greater than or Equal flags        */
+    uint32_t _reserved1:4;               /*!< bit: 20..23  Reserved                           */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0)          */
+    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0)          */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31                                             /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30                                             /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29                                             /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28                                             /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27                                             /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos                        25                                             /*!< xPSR: IT Position */
+#define xPSR_IT_Msk                        (3UL << xPSR_IT_Pos)                           /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos                         24                                             /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_GE_Pos                        16                                             /*!< xPSR: GE Position */
+#define xPSR_GE_Msk                        (0xFUL << xPSR_GE_Pos)                         /*!< xPSR: GE Mask */
+
+#define xPSR_ISR_Pos                        0                                             /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used                   */
+    uint32_t FPCA:1;                     /*!< bit:      2  FP extension active flag           */
+    uint32_t _reserved0:29;              /*!< bit:  3..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_FPCA_Pos                    2                                             /*!< CONTROL: FPCA Position */
+#define CONTROL_FPCA_Msk                   (1UL << CONTROL_FPCA_Pos)                      /*!< CONTROL: FPCA Mask */
+
+#define CONTROL_SPSEL_Pos                   1                                             /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0                                             /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+    \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IO uint32_t ISER[8];                 /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register           */
+       uint32_t RESERVED0[24];
+  __IO uint32_t ICER[8];                 /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register         */
+       uint32_t RSERVED1[24];
+  __IO uint32_t ISPR[8];                 /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register          */
+       uint32_t RESERVED2[24];
+  __IO uint32_t ICPR[8];                 /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register        */
+       uint32_t RESERVED3[24];
+  __IO uint32_t IABR[8];                 /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register           */
+       uint32_t RESERVED4[56];
+  __IO uint8_t  IP[240];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+       uint32_t RESERVED5[644];
+  __O  uint32_t STIR;                    /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register     */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0                                          /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCB     System Control Block (SCB)
+    \brief      Type definitions for the System Control Block Registers
+  @{
+ */
+
+/** \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __I  uint32_t CPUID;                   /*!< Offset: 0x000 (R/ )  CPUID Base Register                                   */
+  __IO uint32_t ICSR;                    /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register                  */
+  __IO uint32_t VTOR;                    /*!< Offset: 0x008 (R/W)  Vector Table Offset Register                          */
+  __IO uint32_t AIRCR;                   /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register      */
+  __IO uint32_t SCR;                     /*!< Offset: 0x010 (R/W)  System Control Register                               */
+  __IO uint32_t CCR;                     /*!< Offset: 0x014 (R/W)  Configuration Control Register                        */
+  __IO uint8_t  SHPR[12];                /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IO uint32_t SHCSR;                   /*!< Offset: 0x024 (R/W)  System Handler Control and State Register             */
+  __IO uint32_t CFSR;                    /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register                    */
+  __IO uint32_t HFSR;                    /*!< Offset: 0x02C (R/W)  HardFault Status Register                             */
+  __IO uint32_t DFSR;                    /*!< Offset: 0x030 (R/W)  Debug Fault Status Register                           */
+  __IO uint32_t MMFAR;                   /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register                      */
+  __IO uint32_t BFAR;                    /*!< Offset: 0x038 (R/W)  BusFault Address Register                             */
+  __IO uint32_t AFSR;                    /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register                       */
+  __I  uint32_t ID_PFR[2];               /*!< Offset: 0x040 (R/ )  Processor Feature Register                            */
+  __I  uint32_t ID_DFR;                  /*!< Offset: 0x048 (R/ )  Debug Feature Register                                */
+  __I  uint32_t ID_AFR;                  /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register                            */
+  __I  uint32_t ID_MFR[4];               /*!< Offset: 0x050 (R/ )  Memory Model Feature Register                         */
+  __I  uint32_t ID_ISAR[5];              /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register                   */
+       uint32_t RESERVED0[1];
+  __I  uint32_t CLIDR;                   /*!< Offset: 0x078 (R/ )  Cache Level ID register                               */
+  __I  uint32_t CTR;                     /*!< Offset: 0x07C (R/ )  Cache Type register                                   */
+  __I  uint32_t CCSIDR;                  /*!< Offset: 0x080 (R/ )  Cache Size ID Register                                */
+  __IO uint32_t CSSELR;                  /*!< Offset: 0x084 (R/W)  Cache Size Selection Register                         */
+  __IO uint32_t CPACR;                   /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register                   */
+       uint32_t RESERVED3[93];
+  __O  uint32_t STIR;                    /*!< Offset: 0x200 ( /W)  Software Triggered Interrupt Register                 */
+       uint32_t RESERVED4[15];
+  __I  uint32_t MVFR0;                   /*!< Offset: 0x240 (R/ )  Media and VFP Feature Register 0                      */
+  __I  uint32_t MVFR1;                   /*!< Offset: 0x244 (R/ )  Media and VFP Feature Register 1                      */
+  __I  uint32_t MVFR2;                   /*!< Offset: 0x248 (R/ )  Media and VFP Feature Register 1                      */
+       uint32_t RESERVED5[1];
+  __O  uint32_t ICIALLU;                 /*!< Offset: 0x250 ( /W)  I-Cache Invalidate All to PoU                         */
+       uint32_t RESERVED6[1];
+  __O  uint32_t ICIMVAU;                 /*!< Offset: 0x258 ( /W)  I-Cache Invalidate by MVA to PoU                      */
+  __O  uint32_t DCIMVAC;                 /*!< Offset: 0x25C ( /W)  D-Cache Invalidate by MVA to PoC                      */
+  __O  uint32_t DCISW;                   /*!< Offset: 0x260 ( /W)  D-Cache Invalidate by Set-way                         */
+  __O  uint32_t DCCMVAU;                 /*!< Offset: 0x264 ( /W)  D-Cache Clean by MVA to PoU                           */
+  __O  uint32_t DCCMVAC;                 /*!< Offset: 0x268 ( /W)  D-Cache Clean by MVA to PoC                           */
+  __O  uint32_t DCCSW;                   /*!< Offset: 0x26C ( /W)  D-Cache Clean by Set-way                              */
+  __O  uint32_t DCCIMVAC;                /*!< Offset: 0x270 ( /W)  D-Cache Clean and Invalidate by MVA to PoC            */
+  __O  uint32_t DCCISW;                  /*!< Offset: 0x274 ( /W)  D-Cache Clean and Invalidate by Set-way               */
+       uint32_t RESERVED7[6];
+  __IO uint32_t ITCMCR;                  /*!< Offset: 0x290 (R/W)  Instruction Tightly-Coupled Memory Control Register   */
+  __IO uint32_t DTCMCR;                  /*!< Offset: 0x294 (R/W)  Data Tightly-Coupled Memory Control Registers         */
+  __IO uint32_t AHBPCR;                  /*!< Offset: 0x298 (R/W)  AHBP Control Register                                 */
+  __IO uint32_t CACR;                    /*!< Offset: 0x29C (R/W)  L1 Cache Control Register                             */
+  __IO uint32_t AHBSCR;                  /*!< Offset: 0x2A0 (R/W)  AHB Slave Control Register                            */
+       uint32_t RESERVED8[1];
+  __IO uint32_t ABFSR;                   /*!< Offset: 0x2A8 (R/W)  Auxiliary Bus Fault Status Register                   */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24                                             /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20                                             /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16                                             /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4                                             /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0                                             /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31                                             /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28                                             /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27                                             /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26                                             /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25                                             /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23                                             /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22                                             /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12                                             /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11                                             /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0                                             /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7                                             /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16                                             /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16                                             /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15                                             /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8                                             /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2                                             /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1                                             /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos             0                                             /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk            (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/)           /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4                                             /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2                                             /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1                                             /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_BP_Pos                      18                                            /*!< SCB CCR: Branch prediction enable bit Position */
+#define SCB_CCR_BP_Msk                     (1UL << SCB_CCR_BP_Pos)                        /*!< SCB CCR: Branch prediction enable bit Mask */
+
+#define SCB_CCR_IC_Pos                      17                                            /*!< SCB CCR: Instruction cache enable bit Position */
+#define SCB_CCR_IC_Msk                     (1UL << SCB_CCR_IC_Pos)                        /*!< SCB CCR: Instruction cache enable bit Mask */
+
+#define SCB_CCR_DC_Pos                      16                                            /*!< SCB CCR: Cache enable bit Position */
+#define SCB_CCR_DC_Msk                     (1UL << SCB_CCR_DC_Pos)                        /*!< SCB CCR: Cache enable bit Mask */
+
+#define SCB_CCR_STKALIGN_Pos                9                                             /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8                                             /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4                                             /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3                                             /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1                                             /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos          0                                             /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk         (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/)        /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos          18                                             /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17                                             /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16                                             /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15                                             /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14                                             /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13                                             /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12                                             /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11                                             /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10                                             /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8                                             /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7                                             /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3                                             /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1                                             /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0                                             /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16                                             /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8                                             /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0                                             /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31                                             /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30                                             /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1                                             /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4                                             /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3                                             /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2                                             /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1                                             /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0                                             /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/* Cache Level ID register */
+#define SCB_CLIDR_LOUU_Pos                 27                                             /*!< SCB CLIDR: LoUU Position */
+#define SCB_CLIDR_LOUU_Msk                 (7UL << SCB_CLIDR_LOUU_Pos)                    /*!< SCB CLIDR: LoUU Mask */
+
+#define SCB_CLIDR_LOC_Pos                  24                                             /*!< SCB CLIDR: LoC Position */
+#define SCB_CLIDR_LOC_Msk                  (7UL << SCB_CLIDR_FORMAT_Pos)                  /*!< SCB CLIDR: LoC Mask */
+
+/* Cache Type register */
+#define SCB_CTR_FORMAT_Pos                 29                                             /*!< SCB CTR: Format Position */
+#define SCB_CTR_FORMAT_Msk                 (7UL << SCB_CTR_FORMAT_Pos)                    /*!< SCB CTR: Format Mask */
+
+#define SCB_CTR_CWG_Pos                    24                                             /*!< SCB CTR: CWG Position */
+#define SCB_CTR_CWG_Msk                    (0xFUL << SCB_CTR_CWG_Pos)                     /*!< SCB CTR: CWG Mask */
+
+#define SCB_CTR_ERG_Pos                    20                                             /*!< SCB CTR: ERG Position */
+#define SCB_CTR_ERG_Msk                    (0xFUL << SCB_CTR_ERG_Pos)                     /*!< SCB CTR: ERG Mask */
+
+#define SCB_CTR_DMINLINE_Pos               16                                             /*!< SCB CTR: DminLine Position */
+#define SCB_CTR_DMINLINE_Msk               (0xFUL << SCB_CTR_DMINLINE_Pos)                /*!< SCB CTR: DminLine Mask */
+
+#define SCB_CTR_IMINLINE_Pos                0                                             /*!< SCB CTR: ImInLine Position */
+#define SCB_CTR_IMINLINE_Msk               (0xFUL /*<< SCB_CTR_IMINLINE_Pos*/)            /*!< SCB CTR: ImInLine Mask */
+
+/* Cache Size ID Register */
+#define SCB_CCSIDR_WT_Pos                  31                                             /*!< SCB CCSIDR: WT Position */
+#define SCB_CCSIDR_WT_Msk                  (7UL << SCB_CCSIDR_WT_Pos)                     /*!< SCB CCSIDR: WT Mask */
+
+#define SCB_CCSIDR_WB_Pos                  30                                             /*!< SCB CCSIDR: WB Position */
+#define SCB_CCSIDR_WB_Msk                  (7UL << SCB_CCSIDR_WB_Pos)                     /*!< SCB CCSIDR: WB Mask */
+
+#define SCB_CCSIDR_RA_Pos                  29                                             /*!< SCB CCSIDR: RA Position */
+#define SCB_CCSIDR_RA_Msk                  (7UL << SCB_CCSIDR_RA_Pos)                     /*!< SCB CCSIDR: RA Mask */
+
+#define SCB_CCSIDR_WA_Pos                  28                                             /*!< SCB CCSIDR: WA Position */
+#define SCB_CCSIDR_WA_Msk                  (7UL << SCB_CCSIDR_WA_Pos)                     /*!< SCB CCSIDR: WA Mask */
+
+#define SCB_CCSIDR_NUMSETS_Pos             13                                             /*!< SCB CCSIDR: NumSets Position */
+#define SCB_CCSIDR_NUMSETS_Msk             (0x7FFFUL << SCB_CCSIDR_NUMSETS_Pos)           /*!< SCB CCSIDR: NumSets Mask */
+
+#define SCB_CCSIDR_ASSOCIATIVITY_Pos        3                                             /*!< SCB CCSIDR: Associativity Position */
+#define SCB_CCSIDR_ASSOCIATIVITY_Msk       (0x3FFUL << SCB_CCSIDR_ASSOCIATIVITY_Pos)      /*!< SCB CCSIDR: Associativity Mask */
+
+#define SCB_CCSIDR_LINESIZE_Pos             0                                             /*!< SCB CCSIDR: LineSize Position */
+#define SCB_CCSIDR_LINESIZE_Msk            (7UL /*<< SCB_CCSIDR_LINESIZE_Pos*/)           /*!< SCB CCSIDR: LineSize Mask */
+
+/* Cache Size Selection Register */
+#define SCB_CSSELR_LEVEL_Pos                1                                             /*!< SCB CSSELR: Level Position */
+#define SCB_CSSELR_LEVEL_Msk               (7UL << SCB_CSSELR_LEVEL_Pos)                  /*!< SCB CSSELR: Level Mask */
+
+#define SCB_CSSELR_IND_Pos                  0                                             /*!< SCB CSSELR: InD Position */
+#define SCB_CSSELR_IND_Msk                 (1UL /*<< SCB_CSSELR_IND_Pos*/)                /*!< SCB CSSELR: InD Mask */
+
+/* SCB Software Triggered Interrupt Register */
+#define SCB_STIR_INTID_Pos                  0                                             /*!< SCB STIR: INTID Position */
+#define SCB_STIR_INTID_Msk                 (0x1FFUL /*<< SCB_STIR_INTID_Pos*/)            /*!< SCB STIR: INTID Mask */
+
+/* Instruction Tightly-Coupled Memory Control Register*/
+#define SCB_ITCMCR_SZ_Pos                   3                                             /*!< SCB ITCMCR: SZ Position */
+#define SCB_ITCMCR_SZ_Msk                  (0xFUL << SCB_ITCMCR_SZ_Pos)                   /*!< SCB ITCMCR: SZ Mask */
+
+#define SCB_ITCMCR_RETEN_Pos                2                                             /*!< SCB ITCMCR: RETEN Position */
+#define SCB_ITCMCR_RETEN_Msk               (1UL << SCB_ITCMCR_RETEN_Pos)                  /*!< SCB ITCMCR: RETEN Mask */
+
+#define SCB_ITCMCR_RMW_Pos                  1                                             /*!< SCB ITCMCR: RMW Position */
+#define SCB_ITCMCR_RMW_Msk                 (1UL << SCB_ITCMCR_RMW_Pos)                    /*!< SCB ITCMCR: RMW Mask */
+
+#define SCB_ITCMCR_EN_Pos                   0                                             /*!< SCB ITCMCR: EN Position */
+#define SCB_ITCMCR_EN_Msk                  (1UL /*<< SCB_ITCMCR_EN_Pos*/)                 /*!< SCB ITCMCR: EN Mask */
+
+/* Data Tightly-Coupled Memory Control Registers */
+#define SCB_DTCMCR_SZ_Pos                   3                                             /*!< SCB DTCMCR: SZ Position */
+#define SCB_DTCMCR_SZ_Msk                  (0xFUL << SCB_DTCMCR_SZ_Pos)                   /*!< SCB DTCMCR: SZ Mask */
+
+#define SCB_DTCMCR_RETEN_Pos                2                                             /*!< SCB DTCMCR: RETEN Position */
+#define SCB_DTCMCR_RETEN_Msk               (1UL << SCB_DTCMCR_RETEN_Pos)                   /*!< SCB DTCMCR: RETEN Mask */
+
+#define SCB_DTCMCR_RMW_Pos                  1                                             /*!< SCB DTCMCR: RMW Position */
+#define SCB_DTCMCR_RMW_Msk                 (1UL << SCB_DTCMCR_RMW_Pos)                    /*!< SCB DTCMCR: RMW Mask */
+
+#define SCB_DTCMCR_EN_Pos                   0                                             /*!< SCB DTCMCR: EN Position */
+#define SCB_DTCMCR_EN_Msk                  (1UL /*<< SCB_DTCMCR_EN_Pos*/)                 /*!< SCB DTCMCR: EN Mask */
+
+/* AHBP Control Register */
+#define SCB_AHBPCR_SZ_Pos                   1                                             /*!< SCB AHBPCR: SZ Position */
+#define SCB_AHBPCR_SZ_Msk                  (7UL << SCB_AHBPCR_SZ_Pos)                     /*!< SCB AHBPCR: SZ Mask */
+
+#define SCB_AHBPCR_EN_Pos                   0                                             /*!< SCB AHBPCR: EN Position */
+#define SCB_AHBPCR_EN_Msk                  (1UL /*<< SCB_AHBPCR_EN_Pos*/)                 /*!< SCB AHBPCR: EN Mask */
+
+/* L1 Cache Control Register */
+#define SCB_CACR_FORCEWT_Pos                2                                             /*!< SCB CACR: FORCEWT Position */
+#define SCB_CACR_FORCEWT_Msk               (1UL << SCB_CACR_FORCEWT_Pos)                  /*!< SCB CACR: FORCEWT Mask */
+
+#define SCB_CACR_ECCEN_Pos                  1                                             /*!< SCB CACR: ECCEN Position */
+#define SCB_CACR_ECCEN_Msk                 (1UL << SCB_CACR_ECCEN_Pos)                    /*!< SCB CACR: ECCEN Mask */
+
+#define SCB_CACR_SIWT_Pos                   0                                             /*!< SCB CACR: SIWT Position */
+#define SCB_CACR_SIWT_Msk                  (1UL /*<< SCB_CACR_SIWT_Pos*/)                 /*!< SCB CACR: SIWT Mask */
+
+/* AHBS control register */
+#define SCB_AHBSCR_INITCOUNT_Pos           11                                             /*!< SCB AHBSCR: INITCOUNT Position */
+#define SCB_AHBSCR_INITCOUNT_Msk           (0x1FUL << SCB_AHBPCR_INITCOUNT_Pos)           /*!< SCB AHBSCR: INITCOUNT Mask */
+
+#define SCB_AHBSCR_TPRI_Pos                 2                                             /*!< SCB AHBSCR: TPRI Position */
+#define SCB_AHBSCR_TPRI_Msk                (0x1FFUL << SCB_AHBPCR_TPRI_Pos)               /*!< SCB AHBSCR: TPRI Mask */
+
+#define SCB_AHBSCR_CTL_Pos                  0                                             /*!< SCB AHBSCR: CTL Position*/
+#define SCB_AHBSCR_CTL_Msk                 (3UL /*<< SCB_AHBPCR_CTL_Pos*/)                /*!< SCB AHBSCR: CTL Mask */
+
+/* Auxiliary Bus Fault Status Register */
+#define SCB_ABFSR_AXIMTYPE_Pos              8                                             /*!< SCB ABFSR: AXIMTYPE Position*/
+#define SCB_ABFSR_AXIMTYPE_Msk             (3UL << SCB_ABFSR_AXIMTYPE_Pos)                /*!< SCB ABFSR: AXIMTYPE Mask */
+
+#define SCB_ABFSR_EPPB_Pos                  4                                             /*!< SCB ABFSR: EPPB Position*/
+#define SCB_ABFSR_EPPB_Msk                 (1UL << SCB_ABFSR_EPPB_Pos)                    /*!< SCB ABFSR: EPPB Mask */
+
+#define SCB_ABFSR_AXIM_Pos                  3                                             /*!< SCB ABFSR: AXIM Position*/
+#define SCB_ABFSR_AXIM_Msk                 (1UL << SCB_ABFSR_AXIM_Pos)                    /*!< SCB ABFSR: AXIM Mask */
+
+#define SCB_ABFSR_AHBP_Pos                  2                                             /*!< SCB ABFSR: AHBP Position*/
+#define SCB_ABFSR_AHBP_Msk                 (1UL << SCB_ABFSR_AHBP_Pos)                    /*!< SCB ABFSR: AHBP Mask */
+
+#define SCB_ABFSR_DTCM_Pos                  1                                             /*!< SCB ABFSR: DTCM Position*/
+#define SCB_ABFSR_DTCM_Msk                 (1UL << SCB_ABFSR_DTCM_Pos)                    /*!< SCB ABFSR: DTCM Mask */
+
+#define SCB_ABFSR_ITCM_Pos                  0                                             /*!< SCB ABFSR: ITCM Position*/
+#define SCB_ABFSR_ITCM_Msk                 (1UL /*<< SCB_ABFSR_ITCM_Pos*/)                /*!< SCB ABFSR: ITCM Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+    \brief      Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/** \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+       uint32_t RESERVED0[1];
+  __I  uint32_t ICTR;                    /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register      */
+  __IO uint32_t ACTLR;                   /*!< Offset: 0x008 (R/W)  Auxiliary Control Register              */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0                                          /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Pos    12                                          /*!< ACTLR: DISITMATBFLUSH Position */
+#define SCnSCB_ACTLR_DISITMATBFLUSH_Msk    (1UL << SCnSCB_ACTLR_DISITMATBFLUSH_Pos)    /*!< ACTLR: DISITMATBFLUSH Mask */
+
+#define SCnSCB_ACTLR_DISRAMODE_Pos         11                                          /*!< ACTLR: DISRAMODE Position */
+#define SCnSCB_ACTLR_DISRAMODE_Msk         (1UL << SCnSCB_ACTLR_DISRAMODE_Pos)         /*!< ACTLR: DISRAMODE Mask */
+
+#define SCnSCB_ACTLR_FPEXCODIS_Pos         10                                          /*!< ACTLR: FPEXCODIS Position */
+#define SCnSCB_ACTLR_FPEXCODIS_Msk         (1UL << SCnSCB_ACTLR_FPEXCODIS_Pos)         /*!< ACTLR: FPEXCODIS Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos            2                                          /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk           (1UL << SCnSCB_ACTLR_DISFOLD_Pos)           /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos         0                                          /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk        (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/)    /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+    \brief      Type definitions for the System Timer Registers.
+  @{
+ */
+
+/** \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                    /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                     /*!< Offset: 0x008 (R/W)  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                   /*!< Offset: 0x00C (R/ )  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+    \brief      Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/** \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __O  union
+  {
+    __O  uint8_t    u8;                  /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit                   */
+    __O  uint16_t   u16;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit                  */
+    __O  uint32_t   u32;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit                  */
+  }  PORT [32];                          /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers               */
+       uint32_t RESERVED0[864];
+  __IO uint32_t TER;                     /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register                 */
+       uint32_t RESERVED1[15];
+  __IO uint32_t TPR;                     /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register              */
+       uint32_t RESERVED2[15];
+  __IO uint32_t TCR;                     /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register                */
+       uint32_t RESERVED3[29];
+  __O  uint32_t IWR;                     /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register            */
+  __I  uint32_t IRR;                     /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register             */
+  __IO uint32_t IMCR;                    /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register     */
+       uint32_t RESERVED4[43];
+  __O  uint32_t LAR;                     /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register                  */
+  __I  uint32_t LSR;                     /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register                  */
+       uint32_t RESERVED5[6];
+  __I  uint32_t PID4;                    /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __I  uint32_t PID5;                    /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __I  uint32_t PID6;                    /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __I  uint32_t PID7;                    /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __I  uint32_t PID0;                    /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __I  uint32_t PID1;                    /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __I  uint32_t PID2;                    /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __I  uint32_t PID3;                    /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __I  uint32_t CID0;                    /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __I  uint32_t CID1;                    /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __I  uint32_t CID2;                    /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __I  uint32_t CID3;                    /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0                                             /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/)            /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23                                             /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos             16                                             /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk             (0x7FUL << ITM_TCR_TraceBusID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10                                             /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos              8                                             /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk             (3UL << ITM_TCR_TSPrescale_Pos)                /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4                                             /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3                                             /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2                                             /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1                                             /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0                                             /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0                                             /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0                                             /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0                                             /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2                                             /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1                                             /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0                                             /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+    \brief      Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/** \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  Control Register                          */
+  __IO uint32_t CYCCNT;                  /*!< Offset: 0x004 (R/W)  Cycle Count Register                      */
+  __IO uint32_t CPICNT;                  /*!< Offset: 0x008 (R/W)  CPI Count Register                        */
+  __IO uint32_t EXCCNT;                  /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register         */
+  __IO uint32_t SLEEPCNT;                /*!< Offset: 0x010 (R/W)  Sleep Count Register                      */
+  __IO uint32_t LSUCNT;                  /*!< Offset: 0x014 (R/W)  LSU Count Register                        */
+  __IO uint32_t FOLDCNT;                 /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register         */
+  __I  uint32_t PCSR;                    /*!< Offset: 0x01C (R/ )  Program Counter Sample Register           */
+  __IO uint32_t COMP0;                   /*!< Offset: 0x020 (R/W)  Comparator Register 0                     */
+  __IO uint32_t MASK0;                   /*!< Offset: 0x024 (R/W)  Mask Register 0                           */
+  __IO uint32_t FUNCTION0;               /*!< Offset: 0x028 (R/W)  Function Register 0                       */
+       uint32_t RESERVED0[1];
+  __IO uint32_t COMP1;                   /*!< Offset: 0x030 (R/W)  Comparator Register 1                     */
+  __IO uint32_t MASK1;                   /*!< Offset: 0x034 (R/W)  Mask Register 1                           */
+  __IO uint32_t FUNCTION1;               /*!< Offset: 0x038 (R/W)  Function Register 1                       */
+       uint32_t RESERVED1[1];
+  __IO uint32_t COMP2;                   /*!< Offset: 0x040 (R/W)  Comparator Register 2                     */
+  __IO uint32_t MASK2;                   /*!< Offset: 0x044 (R/W)  Mask Register 2                           */
+  __IO uint32_t FUNCTION2;               /*!< Offset: 0x048 (R/W)  Function Register 2                       */
+       uint32_t RESERVED2[1];
+  __IO uint32_t COMP3;                   /*!< Offset: 0x050 (R/W)  Comparator Register 3                     */
+  __IO uint32_t MASK3;                   /*!< Offset: 0x054 (R/W)  Mask Register 3                           */
+  __IO uint32_t FUNCTION3;               /*!< Offset: 0x058 (R/W)  Function Register 3                       */
+       uint32_t RESERVED3[981];
+  __O  uint32_t LAR;                     /*!< Offset: 0xFB0 (  W)  Lock Access Register                      */
+  __I  uint32_t LSR;                     /*!< Offset: 0xFB4 (R  )  Lock Status Register                      */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28                                          /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27                                          /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26                                          /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25                                          /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24                                          /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22                                          /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21                                          /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20                                          /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19                                          /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18                                          /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17                                          /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16                                          /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12                                          /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10                                          /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9                                          /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5                                          /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1                                          /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0                                          /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0                                          /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0                                          /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0                                          /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0                                          /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0                                          /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos                   0                                          /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk                  (0x1FUL /*<< DWT_MASK_MASK_Pos*/)           /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos           24                                          /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos        16                                          /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos)      /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos        12                                          /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos)      /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10                                          /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos            9                                          /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk           (0x1UL << DWT_FUNCTION_LNK1ENA_Pos)         /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos         8                                          /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk        (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos)      /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos           7                                          /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk          (0x1UL << DWT_FUNCTION_CYCMATCH_Pos)        /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos          5                                          /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk         (0x1UL << DWT_FUNCTION_EMITRANGE_Pos)       /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos           0                                          /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk          (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/)    /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+    \brief      Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/** \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IO uint32_t SSPSR;                   /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register     */
+  __IO uint32_t CSPSR;                   /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+       uint32_t RESERVED0[2];
+  __IO uint32_t ACPR;                    /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+       uint32_t RESERVED1[55];
+  __IO uint32_t SPPR;                    /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+       uint32_t RESERVED2[131];
+  __I  uint32_t FFSR;                    /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IO uint32_t FFCR;                    /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __I  uint32_t FSCR;                    /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
+       uint32_t RESERVED3[759];
+  __I  uint32_t TRIGGER;                 /*!< Offset: 0xEE8 (R/ )  TRIGGER */
+  __I  uint32_t FIFO0;                   /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
+  __I  uint32_t ITATBCTR2;               /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
+       uint32_t RESERVED4[1];
+  __I  uint32_t ITATBCTR0;               /*!< Offset: 0xEF8 (R/ )  ITATBCTR0 */
+  __I  uint32_t FIFO1;                   /*!< Offset: 0xEFC (R/ )  Integration ITM Data */
+  __IO uint32_t ITCTRL;                  /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+       uint32_t RESERVED5[39];
+  __IO uint32_t CLAIMSET;                /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IO uint32_t CLAIMCLR;                /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+       uint32_t RESERVED7[8];
+  __I  uint32_t DEVID;                   /*!< Offset: 0xFC8 (R/ )  TPIU_DEVID */
+  __I  uint32_t DEVTYPE;                 /*!< Offset: 0xFCC (R/ )  TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0                                          /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0                                          /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3                                          /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2                                          /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1                                          /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0                                          /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8                                          /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1                                          /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0                                          /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos          29                                          /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos)        /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos        27                                          /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk        (0x3UL << TPI_FIFO0_ITM_bytecount_Pos)      /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos          26                                          /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos)        /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos        24                                          /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk        (0x3UL << TPI_FIFO0_ETM_bytecount_Pos)      /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos                 16                                          /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk                 (0xFFUL << TPI_FIFO0_ETM2_Pos)              /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos                  8                                          /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk                 (0xFFUL << TPI_FIFO0_ETM1_Pos)              /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos                  0                                          /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos           0                                          /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/)    /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos          29                                          /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos)        /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos        27                                          /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk        (0x3UL << TPI_FIFO1_ITM_bytecount_Pos)      /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos          26                                          /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos)        /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos        24                                          /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk        (0x3UL << TPI_FIFO1_ETM_bytecount_Pos)      /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos                 16                                          /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk                 (0xFFUL << TPI_FIFO1_ITM2_Pos)              /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos                  8                                          /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk                 (0xFFUL << TPI_FIFO1_ITM1_Pos)              /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos                  0                                          /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos           0                                          /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/)    /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0                                          /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11                                          /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10                                          /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9                                          /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos              6                                          /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk             (0x7UL << TPI_DEVID_MinBufSz_Pos)           /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos             5                                          /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk            (0x1UL << TPI_DEVID_AsynClkIn_Pos)          /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0                                          /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos           4                                          /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos             0                                          /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+    \brief      Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/** \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __I  uint32_t TYPE;                    /*!< Offset: 0x000 (R/ )  MPU Type Register                              */
+  __IO uint32_t CTRL;                    /*!< Offset: 0x004 (R/W)  MPU Control Register                           */
+  __IO uint32_t RNR;                     /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register                     */
+  __IO uint32_t RBAR;                    /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register               */
+  __IO uint32_t RASR;                    /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register         */
+  __IO uint32_t RBAR_A1;                 /*!< Offset: 0x014 (R/W)  MPU Alias 1 Region Base Address Register       */
+  __IO uint32_t RASR_A1;                 /*!< Offset: 0x018 (R/W)  MPU Alias 1 Region Attribute and Size Register */
+  __IO uint32_t RBAR_A2;                 /*!< Offset: 0x01C (R/W)  MPU Alias 2 Region Base Address Register       */
+  __IO uint32_t RASR_A2;                 /*!< Offset: 0x020 (R/W)  MPU Alias 2 Region Attribute and Size Register */
+  __IO uint32_t RBAR_A3;                 /*!< Offset: 0x024 (R/W)  MPU Alias 3 Region Base Address Register       */
+  __IO uint32_t RASR_A3;                 /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos               16                                             /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8                                             /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0                                             /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos             2                                             /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1                                             /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0                                             /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos                  0                                             /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos                   5                                             /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos)             /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4                                             /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0                                             /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos                 16                                             /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28                                             /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24                                             /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19                                             /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18                                             /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17                                             /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16                                             /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8                                             /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1                                             /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0                                             /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_FPU     Floating Point Unit (FPU)
+    \brief      Type definitions for the Floating Point Unit (FPU)
+  @{
+ */
+
+/** \brief  Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+       uint32_t RESERVED0[1];
+  __IO uint32_t FPCCR;                   /*!< Offset: 0x004 (R/W)  Floating-Point Context Control Register               */
+  __IO uint32_t FPCAR;                   /*!< Offset: 0x008 (R/W)  Floating-Point Context Address Register               */
+  __IO uint32_t FPDSCR;                  /*!< Offset: 0x00C (R/W)  Floating-Point Default Status Control Register        */
+  __I  uint32_t MVFR0;                   /*!< Offset: 0x010 (R/ )  Media and FP Feature Register 0                       */
+  __I  uint32_t MVFR1;                   /*!< Offset: 0x014 (R/ )  Media and FP Feature Register 1                       */
+  __I  uint32_t MVFR2;                   /*!< Offset: 0x018 (R/ )  Media and FP Feature Register 2                       */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos                31                                             /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk                (1UL << FPU_FPCCR_ASPEN_Pos)                   /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos                30                                             /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk                (1UL << FPU_FPCCR_LSPEN_Pos)                   /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos                8                                             /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk               (1UL << FPU_FPCCR_MONRDY_Pos)                  /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos                 6                                             /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk                (1UL << FPU_FPCCR_BFRDY_Pos)                   /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos                 5                                             /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk                (1UL << FPU_FPCCR_MMRDY_Pos)                   /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos                 4                                             /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk                (1UL << FPU_FPCCR_HFRDY_Pos)                   /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos                3                                             /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk               (1UL << FPU_FPCCR_THREAD_Pos)                  /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos                  1                                             /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk                 (1UL << FPU_FPCCR_USER_Pos)                    /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos                0                                             /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk               (1UL /*<< FPU_FPCCR_LSPACT_Pos*/)              /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos               3                                             /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk              (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos)        /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos                 26                                             /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk                 (1UL << FPU_FPDSCR_AHP_Pos)                    /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos                  25                                             /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk                  (1UL << FPU_FPDSCR_DN_Pos)                     /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos                  24                                             /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk                  (1UL << FPU_FPDSCR_FZ_Pos)                     /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos               22                                             /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk               (3UL << FPU_FPDSCR_RMode_Pos)                  /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos    28                                             /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk    (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos)     /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos        24                                             /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk        (0xFUL << FPU_MVFR0_Short_vectors_Pos)         /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos          20                                             /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk          (0xFUL << FPU_MVFR0_Square_root_Pos)           /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos               16                                             /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk               (0xFUL << FPU_MVFR0_Divide_Pos)                /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos    12                                             /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk    (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos)     /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos      8                                             /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk     (0xFUL << FPU_MVFR0_Double_precision_Pos)      /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos      4                                             /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk     (0xFUL << FPU_MVFR0_Single_precision_Pos)      /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos      0                                             /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk     (0xFUL /*<< FPU_MVFR0_A_SIMD_registers_Pos*/)  /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos         28                                             /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk         (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos)          /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos              24                                             /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk              (0xFUL << FPU_MVFR1_FP_HPFP_Pos)               /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos            4                                             /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk           (0xFUL << FPU_MVFR1_D_NaN_mode_Pos)            /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos              0                                             /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk             (0xFUL /*<< FPU_MVFR1_FtZ_mode_Pos*/)          /*!< MVFR1: FtZ mode bits Mask */
+
+/* Media and FP Feature Register 2 */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+    \brief      Type definitions for the Core Debug Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IO uint32_t DHCSR;                   /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register    */
+  __O  uint32_t DCRSR;                   /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register        */
+  __IO uint32_t DCRDR;                   /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register            */
+  __IO uint32_t DEMCR;                   /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16                                             /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25                                             /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24                                             /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19                                             /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18                                             /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17                                             /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16                                             /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5                                             /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3                                             /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2                                             /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1                                             /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0                                             /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos         16                                             /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0                                             /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos         24                                             /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19                                             /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18                                             /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17                                             /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16                                             /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10                                             /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9                                             /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8                                             /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7                                             /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6                                             /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5                                             /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4                                             /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0                                             /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_core_base     Core Definitions
+    \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address  */
+#define ITM_BASE            (0xE0000000UL)                            /*!< ITM Base Address                   */
+#define DWT_BASE            (0xE0001000UL)                            /*!< DWT Base Address                   */
+#define TPI_BASE            (0xE0040000UL)                            /*!< TPI Base Address                   */
+#define CoreDebug_BASE      (0xE000EDF0UL)                            /*!< Core Debug Base Address            */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address               */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address                  */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address  */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct           */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct       */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct          */
+#define ITM                 ((ITM_Type       *)     ITM_BASE      )   /*!< ITM configuration struct           */
+#define DWT                 ((DWT_Type       *)     DWT_BASE      )   /*!< DWT configuration struct           */
+#define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct           */
+#define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct    */
+
+#if (__MPU_PRESENT == 1)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit             */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit             */
+#endif
+
+#if (__FPU_PRESENT == 1)
+  #define FPU_BASE          (SCS_BASE +  0x0F30UL)                    /*!< Floating Point Unit                */
+  #define FPU               ((FPU_Type       *)     FPU_BASE      )   /*!< Floating Point Unit                */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+    \brief      Functions that manage interrupts and exceptions via the NVIC.
+    @{
+ */
+
+/** \brief  Set Priority Grouping
+
+  The function sets the priority grouping field using the required unlock sequence.
+  The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+  Only values from 0..7 are used.
+  In case of a conflict between priority grouping and available
+  priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+    \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk));             /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << 8)                       );              /* Insert write key and priorty group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/** \brief  Get Priority Grouping
+
+  The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+    \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/** \brief  Enable External Interrupt
+
+    The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Disable External Interrupt
+
+    The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Get Pending Interrupt
+
+    The function reads the pending register in the NVIC and returns the pending bit
+    for the specified interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not pending.
+    \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief  Set Pending Interrupt
+
+    The function sets the pending bit of an external interrupt.
+
+    \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Clear Pending Interrupt
+
+    The function clears the pending bit of an external interrupt.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Get Active Interrupt
+
+    The function reads the active register in NVIC and returns the active bit.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not active.
+    \return             1  Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief  Set Interrupt Priority
+
+    The function sets the priority of an interrupt.
+
+    \note The priority cannot be set for every core interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+    \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if((int32_t)IRQn < 0) {
+    SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else {
+    NVIC->IP[((uint32_t)(int32_t)IRQn)]                = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/** \brief  Get Interrupt Priority
+
+    The function reads the priority of an interrupt. The interrupt
+    number can be positive to specify an external (device specific)
+    interrupt, or negative to specify an internal (core) interrupt.
+
+
+    \param [in]   IRQn  Interrupt number.
+    \return             Interrupt Priority. Value is aligned automatically to the implemented
+                        priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if((int32_t)IRQn < 0) {
+    return(((uint32_t)SCB->SHPR[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8 - __NVIC_PRIO_BITS)));
+  }
+  else {
+    return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)]               >> (8 - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/** \brief  Encode Priority
+
+    The function encodes the priority for an interrupt with the given priority group,
+    preemptive priority value, and subpriority value.
+    In case of a conflict between priority grouping and available
+    priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+    \param [in]     PriorityGroup  Used priority group.
+    \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+    \param [in]       SubPriority  Subpriority value (starting from 0).
+    \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/** \brief  Decode Priority
+
+    The function decodes an interrupt priority value with a given priority group to
+    preemptive priority value and subpriority value.
+    In case of a conflict between priority grouping and available
+    priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+
+    \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+    \param [in]     PriorityGroup  Used priority group.
+    \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+    \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/** \brief  System Reset
+
+    The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+  while(1) { __NOP(); }                                             /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+/* ##########################  FPU functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_FpuFunctions FPU Functions
+    \brief      Function that provides FPU type.
+    @{
+ */
+
+/**
+  \fn          uint32_t SCB_GetFPUType(void)
+  \brief       get FPU type
+  \returns
+   - \b  0: No FPU
+   - \b  1: Single precision FPU
+   - \b  2: Double + Single precision FPU
+ */
+__STATIC_INLINE uint32_t SCB_GetFPUType(void)
+{
+  uint32_t mvfr0;
+
+  mvfr0 = SCB->MVFR0;
+  if        ((mvfr0 & 0x00000FF0UL) == 0x220UL) {
+    return 2UL;           // Double + Single precision FPU
+  } else if ((mvfr0 & 0x00000FF0UL) == 0x020UL) {
+    return 1UL;           // Single precision FPU
+  } else {
+    return 0UL;           // No FPU
+  }
+}
+
+
+/*@} end of CMSIS_Core_FpuFunctions */
+
+
+
+/* ##########################  Cache functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_CacheFunctions Cache Functions
+    \brief      Functions that configure Instruction and Data cache.
+    @{
+ */
+
+/* Cache Size ID Register Macros */
+#define CCSIDR_WAYS(x)         (((x) & SCB_CCSIDR_ASSOCIATIVITY_Msk) >> SCB_CCSIDR_ASSOCIATIVITY_Pos)
+#define CCSIDR_SETS(x)         (((x) & SCB_CCSIDR_NUMSETS_Msk      ) >> SCB_CCSIDR_NUMSETS_Pos      )
+#define CCSIDR_LSSHIFT(x)      (((x) & SCB_CCSIDR_LINESIZE_Msk     ) /*>> SCB_CCSIDR_LINESIZE_Pos*/ )
+
+
+/** \brief Enable I-Cache
+
+    The function turns on I-Cache
+  */
+__STATIC_INLINE void SCB_EnableICache (void)
+{
+  #if (__ICACHE_PRESENT == 1)
+    __DSB();
+    __ISB();
+    SCB->ICIALLU = 0UL;                     // invalidate I-Cache
+    SCB->CCR |=  (uint32_t)SCB_CCR_IC_Msk;  // enable I-Cache
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/** \brief Disable I-Cache
+
+    The function turns off I-Cache
+  */
+__STATIC_INLINE void SCB_DisableICache (void)
+{
+  #if (__ICACHE_PRESENT == 1)
+    __DSB();
+    __ISB();
+    SCB->CCR &= ~(uint32_t)SCB_CCR_IC_Msk;  // disable I-Cache
+    SCB->ICIALLU = 0UL;                     // invalidate I-Cache
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/** \brief Invalidate I-Cache
+
+    The function invalidates I-Cache
+  */
+__STATIC_INLINE void SCB_InvalidateICache (void)
+{
+  #if (__ICACHE_PRESENT == 1)
+    __DSB();
+    __ISB();
+    SCB->ICIALLU = 0UL;
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/** \brief Enable D-Cache
+
+    The function turns on D-Cache
+  */
+__STATIC_INLINE void SCB_EnableDCache (void)
+{
+  #if (__DCACHE_PRESENT == 1)
+    uint32_t ccsidr, sshift, wshift, sw;
+    uint32_t sets, ways;
+
+    SCB->CSSELR = (0UL << 1) | 0UL;         // Level 1 data cache
+    ccsidr  = SCB->CCSIDR;
+    sets    = (uint32_t)(CCSIDR_SETS(ccsidr));
+    sshift  = (uint32_t)(CCSIDR_LSSHIFT(ccsidr) + 4UL);
+    ways    = (uint32_t)(CCSIDR_WAYS(ccsidr));
+    wshift  = (uint32_t)((uint32_t)__CLZ(ways) & 0x1FUL);
+
+    __DSB();
+
+    do {                                   // invalidate D-Cache
+         uint32_t tmpways = ways;
+         do {
+              sw = ((tmpways << wshift) | (sets << sshift));
+              SCB->DCISW = sw;
+            } while(tmpways--);
+        } while(sets--);
+    __DSB();
+
+    SCB->CCR |=  (uint32_t)SCB_CCR_DC_Msk;   // enable D-Cache
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/** \brief Disable D-Cache
+
+    The function turns off D-Cache
+  */
+__STATIC_INLINE void SCB_DisableDCache (void)
+{
+  #if (__DCACHE_PRESENT == 1)
+    uint32_t ccsidr, sshift, wshift, sw;
+    uint32_t sets, ways;
+
+    SCB->CSSELR = (0UL << 1) | 0UL;         // Level 1 data cache
+    ccsidr  = SCB->CCSIDR;
+    sets    = (uint32_t)(CCSIDR_SETS(ccsidr));
+    sshift  = (uint32_t)(CCSIDR_LSSHIFT(ccsidr) + 4UL);
+    ways    = (uint32_t)(CCSIDR_WAYS(ccsidr));
+    wshift  = (uint32_t)((uint32_t)__CLZ(ways) & 0x1FUL);
+
+    __DSB();
+
+    SCB->CCR &= ~(uint32_t)SCB_CCR_DC_Msk;  // disable D-Cache
+
+    do {                                    // clean & invalidate D-Cache
+         uint32_t tmpways = ways;
+         do {
+              sw = ((tmpways << wshift) | (sets << sshift));
+              SCB->DCCISW = sw;
+            } while(tmpways--);
+        } while(sets--);
+
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/** \brief Invalidate D-Cache
+
+    The function invalidates D-Cache
+  */
+__STATIC_INLINE void SCB_InvalidateDCache (void)
+{
+  #if (__DCACHE_PRESENT == 1)
+    uint32_t ccsidr, sshift, wshift, sw;
+    uint32_t sets, ways;
+
+    SCB->CSSELR = (0UL << 1) | 0UL;         // Level 1 data cache
+    ccsidr  = SCB->CCSIDR;
+    sets    = (uint32_t)(CCSIDR_SETS(ccsidr));
+    sshift  = (uint32_t)(CCSIDR_LSSHIFT(ccsidr) + 4UL);
+    ways    = (uint32_t)(CCSIDR_WAYS(ccsidr));
+    wshift  = (uint32_t)((uint32_t)__CLZ(ways) & 0x1FUL);
+
+    __DSB();
+
+    do {                                    // invalidate D-Cache
+         uint32_t tmpways = ways;
+         do {
+              sw = ((tmpways << wshift) | (sets << sshift));
+              SCB->DCISW = sw;
+            } while(tmpways--);
+        } while(sets--);
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/** \brief Clean D-Cache
+
+    The function cleans D-Cache
+  */
+__STATIC_INLINE void SCB_CleanDCache (void)
+{
+  #if (__DCACHE_PRESENT == 1)
+    uint32_t ccsidr, sshift, wshift, sw;
+    uint32_t sets, ways;
+
+    SCB->CSSELR = (0UL << 1) | 0UL;         // Level 1 data cache
+    ccsidr  = SCB->CCSIDR;
+    sets    = (uint32_t)(CCSIDR_SETS(ccsidr));
+    sshift  = (uint32_t)(CCSIDR_LSSHIFT(ccsidr) + 4UL);
+    ways    = (uint32_t)(CCSIDR_WAYS(ccsidr));
+    wshift  = (uint32_t)((uint32_t)__CLZ(ways) & 0x1FUL);
+
+    __DSB();
+
+    do {                                    // clean D-Cache
+         uint32_t tmpways = ways;
+         do {
+              sw = ((tmpways << wshift) | (sets << sshift));
+              SCB->DCCSW = sw;
+            } while(tmpways--);
+        } while(sets--);
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/** \brief Clean & Invalidate D-Cache
+
+    The function cleans and Invalidates D-Cache
+  */
+__STATIC_INLINE void SCB_CleanInvalidateDCache (void)
+{
+  #if (__DCACHE_PRESENT == 1)
+    uint32_t ccsidr, sshift, wshift, sw;
+    uint32_t sets, ways;
+
+    SCB->CSSELR = (0UL << 1) | 0UL;         // Level 1 data cache
+    ccsidr  = SCB->CCSIDR;
+    sets    = (uint32_t)(CCSIDR_SETS(ccsidr));
+    sshift  = (uint32_t)(CCSIDR_LSSHIFT(ccsidr) + 4UL);
+    ways    = (uint32_t)(CCSIDR_WAYS(ccsidr));
+    wshift  = (uint32_t)((uint32_t)__CLZ(ways) & 0x1FUL);
+
+    __DSB();
+
+    do {                                    // clean & invalidate D-Cache
+         uint32_t tmpways = ways;
+         do {
+              sw = ((tmpways << wshift) | (sets << sshift));
+              SCB->DCCISW = sw;
+            } while(tmpways--);
+        } while(sets--);
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \fn          void SCB_InvalidateDCache_by_Addr(volatile uint32_t *addr, int32_t dsize)
+  \brief       D-Cache Invalidate by address
+  \param[in]   addr    address (aligned to 32-byte boundary)
+  \param[in]   dsize   size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_InvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+  #if (__DCACHE_PRESENT == 1)
+    int32_t  op_size = dsize;
+    uint32_t op_addr = (uint32_t)addr;
+    uint32_t linesize = 32UL;               // in Cortex-M7 size of cache line is fixed to 8 words (32 bytes)
+
+    __DSB();
+
+    while (op_size > 0) {
+      SCB->DCIMVAC = op_addr;
+      op_addr +=          linesize;
+      op_size -= (int32_t)linesize;
+    }
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \fn          void SCB_CleanDCache_by_Addr(volatile uint32_t *addr, int32_t dsize)
+  \brief       D-Cache Clean by address
+  \param[in]   addr    address (aligned to 32-byte boundary)
+  \param[in]   dsize   size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+  #if (__DCACHE_PRESENT == 1)
+    int32_t  op_size = dsize;
+    uint32_t op_addr = (uint32_t) addr;
+    uint32_t linesize = 32UL;               // in Cortex-M7 size of cache line is fixed to 8 words (32 bytes)
+
+    __DSB();
+
+    while (op_size > 0) {
+      SCB->DCCMVAC = op_addr;
+      op_addr +=          linesize;
+      op_size -= (int32_t)linesize;
+    }
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/**
+  \fn          void SCB_CleanInvalidateDCache_by_Addr(volatile uint32_t *addr, int32_t dsize)
+  \brief       D-Cache Clean and Invalidate by address
+  \param[in]   addr    address (aligned to 32-byte boundary)
+  \param[in]   dsize   size of memory block (in number of bytes)
+*/
+__STATIC_INLINE void SCB_CleanInvalidateDCache_by_Addr (uint32_t *addr, int32_t dsize)
+{
+  #if (__DCACHE_PRESENT == 1)
+    int32_t  op_size = dsize;
+    uint32_t op_addr = (uint32_t) addr;
+    uint32_t linesize = 32UL;               // in Cortex-M7 size of cache line is fixed to 8 words (32 bytes)
+
+    __DSB();
+
+    while (op_size > 0) {
+      SCB->DCCIMVAC = op_addr;
+      op_addr +=          linesize;
+      op_size -= (int32_t)linesize;
+    }
+
+    __DSB();
+    __ISB();
+  #endif
+}
+
+
+/*@} end of CMSIS_Core_CacheFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+    \brief      Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief  System Tick Configuration
+
+    The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+    Counter is in free running mode to generate periodic interrupts.
+
+    \param [in]  ticks  Number of ticks between two interrupts.
+
+    \return          0  Function succeeded.
+    \return          1  Function failed.
+
+    \note     When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+    function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+    must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); }    /* Reload value impossible */
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_core_DebugFunctions ITM Functions
+    \brief   Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                    /*!< External variable to receive characters.                         */
+#define                 ITM_RXBUFFER_EMPTY    0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief  ITM Send Character
+
+    The function transmits a character via the ITM channel 0, and
+    \li Just returns when no debugger is connected that has booked the output.
+    \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+    \param [in]     ch  Character to transmit.
+
+    \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0].u32 == 0UL) { __NOP(); }
+    ITM->PORT[0].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/** \brief  ITM Receive Character
+
+    The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+    \return             Received character.
+    \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/** \brief  ITM Check Character
+
+    The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+    \return          0  No character available.
+    \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+    return (0);                                 /* no character available */
+  } else {
+    return (1);                                 /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM7_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_cmFunc.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,664 @@
+/**************************************************************************//**
+ * @file     core_cmFunc.h
+ * @brief    CMSIS Cortex-M Core Function Access Header File
+ * @version  V4.10
+ * @date     18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ###########################  Core Function Access  ########################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+  @{
+ */
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+  #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq();     */
+/* intrinsic void __disable_irq();    */
+
+/** \brief  Get Control Register
+
+    This function returns the content of the Control Register.
+
+    \return               Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+  register uint32_t __regControl         __ASM("control");
+  return(__regControl);
+}
+
+
+/** \brief  Set Control Register
+
+    This function writes the given value to the Control Register.
+
+    \param [in]    control  Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+  register uint32_t __regControl         __ASM("control");
+  __regControl = control;
+}
+
+
+/** \brief  Get IPSR Register
+
+    This function returns the content of the IPSR Register.
+
+    \return               IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+  register uint32_t __regIPSR          __ASM("ipsr");
+  return(__regIPSR);
+}
+
+
+/** \brief  Get APSR Register
+
+    This function returns the content of the APSR Register.
+
+    \return               APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+  register uint32_t __regAPSR          __ASM("apsr");
+  return(__regAPSR);
+}
+
+
+/** \brief  Get xPSR Register
+
+    This function returns the content of the xPSR Register.
+
+    \return               xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+  register uint32_t __regXPSR          __ASM("xpsr");
+  return(__regXPSR);
+}
+
+
+/** \brief  Get Process Stack Pointer
+
+    This function returns the current value of the Process Stack Pointer (PSP).
+
+    \return               PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  return(__regProcessStackPointer);
+}
+
+
+/** \brief  Set Process Stack Pointer
+
+    This function assigns the given value to the Process Stack Pointer (PSP).
+
+    \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  register uint32_t __regProcessStackPointer  __ASM("psp");
+  __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief  Get Main Stack Pointer
+
+    This function returns the current value of the Main Stack Pointer (MSP).
+
+    \return               MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  return(__regMainStackPointer);
+}
+
+
+/** \brief  Set Main Stack Pointer
+
+    This function assigns the given value to the Main Stack Pointer (MSP).
+
+    \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  register uint32_t __regMainStackPointer     __ASM("msp");
+  __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief  Get Priority Mask
+
+    This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+    \return               Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  return(__regPriMask);
+}
+
+
+/** \brief  Set Priority Mask
+
+    This function assigns the given value to the Priority Mask Register.
+
+    \param [in]    priMask  Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  register uint32_t __regPriMask         __ASM("primask");
+  __regPriMask = (priMask);
+}
+
+
+#if       (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief  Enable FIQ
+
+    This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq                __enable_fiq
+
+
+/** \brief  Disable FIQ
+
+    This function disables FIQ interrupts by setting the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq               __disable_fiq
+
+
+/** \brief  Get Base Priority
+
+    This function returns the current value of the Base Priority register.
+
+    \return               Base Priority register value
+ */
+__STATIC_INLINE uint32_t  __get_BASEPRI(void)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  return(__regBasePri);
+}
+
+
+/** \brief  Set Base Priority
+
+    This function assigns the given value to the Base Priority register.
+
+    \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+  register uint32_t __regBasePri         __ASM("basepri");
+  __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief  Set Base Priority with condition
+
+    This function assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+    or the new value increases the BASEPRI priority level.
+
+    \param [in]    basePri  Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
+{
+  register uint32_t __regBasePriMax      __ASM("basepri_max");
+  __regBasePriMax = (basePri & 0xff);
+}
+
+
+/** \brief  Get Fault Mask
+
+    This function returns the current value of the Fault Mask register.
+
+    \return               Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  return(__regFaultMask);
+}
+
+
+/** \brief  Set Fault Mask
+
+    This function assigns the given value to the Fault Mask register.
+
+    \param [in]    faultMask  Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  register uint32_t __regFaultMask       __ASM("faultmask");
+  __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#if       (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07)
+
+/** \brief  Get FPSCR
+
+    This function returns the current value of the Floating Point Status/Control register.
+
+    \return               Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  register uint32_t __regfpscr         __ASM("fpscr");
+  return(__regfpscr);
+#else
+   return(0);
+#endif
+}
+
+
+/** \brief  Set FPSCR
+
+    This function assigns the given value to the Floating Point Status/Control register.
+
+    \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  register uint32_t __regfpscr         __ASM("fpscr");
+  __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief  Enable IRQ Interrupts
+
+  This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+  Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+  __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief  Disable IRQ Interrupts
+
+  This function disables IRQ interrupts by setting the I-bit in the CPSR.
+  Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+  __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief  Get Control Register
+
+    This function returns the content of the Control Register.
+
+    \return               Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, control" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Control Register
+
+    This function writes the given value to the Control Register.
+
+    \param [in]    control  Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+  __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief  Get IPSR Register
+
+    This function returns the content of the IPSR Register.
+
+    \return               IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Get APSR Register
+
+    This function returns the content of the APSR Register.
+
+    \return               APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Get xPSR Register
+
+    This function returns the content of the xPSR Register.
+
+    \return               xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Get Process Stack Pointer
+
+    This function returns the current value of the Process Stack Pointer (PSP).
+
+    \return               PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+  register uint32_t result;
+
+  __ASM volatile ("MRS %0, psp\n"  : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Process Stack Pointer
+
+    This function assigns the given value to the Process Stack Pointer (PSP).
+
+    \param [in]    topOfProcStack  Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+  __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief  Get Main Stack Pointer
+
+    This function returns the current value of the Main Stack Pointer (MSP).
+
+    \return               MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+  register uint32_t result;
+
+  __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Main Stack Pointer
+
+    This function assigns the given value to the Main Stack Pointer (MSP).
+
+    \param [in]    topOfMainStack  Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+  __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief  Get Priority Mask
+
+    This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+    \return               Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, primask" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Priority Mask
+
+    This function assigns the given value to the Priority Mask Register.
+
+    \param [in]    priMask  Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+  __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if       (__CORTEX_M >= 0x03)
+
+/** \brief  Enable FIQ
+
+    This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+  __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief  Disable FIQ
+
+    This function disables FIQ interrupts by setting the F-bit in the CPSR.
+    Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+  __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief  Get Base Priority
+
+    This function returns the current value of the Base Priority register.
+
+    \return               Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, basepri" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Base Priority
+
+    This function assigns the given value to the Base Priority register.
+
+    \param [in]    basePri  Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+  __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief  Set Base Priority with condition
+
+    This function assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
+	or the new value increases the BASEPRI priority level.
+
+    \param [in]    basePri  Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI_MAX(uint32_t value)
+{
+  __ASM volatile ("MSR basepri_max, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief  Get Fault Mask
+
+    This function returns the current value of the Fault Mask register.
+
+    \return               Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+  uint32_t result;
+
+  __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+  return(result);
+}
+
+
+/** \brief  Set Fault Mask
+
+    This function assigns the given value to the Fault Mask register.
+
+    \param [in]    faultMask  Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+  __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if       (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07)
+
+/** \brief  Get FPSCR
+
+    This function returns the current value of the Floating Point Status/Control register.
+
+    \return               Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  uint32_t result;
+
+  /* Empty asm statement works as a scheduling barrier */
+  __ASM volatile ("");
+  __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+  __ASM volatile ("");
+  return(result);
+#else
+   return(0);
+#endif
+}
+
+
+/** \brief  Set FPSCR
+
+    This function assigns the given value to the Floating Point Status/Control register.
+
+    \param [in]    fpscr  Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+  /* Empty asm statement works as a scheduling barrier */
+  __ASM volatile ("");
+  __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+  __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include <cmsis_csm.h>
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_cmInstr.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,916 @@
+/**************************************************************************//**
+ * @file     core_cmInstr.h
+ * @brief    CMSIS Cortex-M Core Instruction Access Header File
+ * @version  V4.10
+ * @date     18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ##########################  Core Instruction Access  ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+  Access to dedicated instructions
+  @{
+*/
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+  #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief  No Operation
+
+    No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP                             __nop
+
+
+/** \brief  Wait For Interrupt
+
+    Wait For Interrupt is a hint instruction that suspends execution
+    until one of a number of events occurs.
+ */
+#define __WFI                             __wfi
+
+
+/** \brief  Wait For Event
+
+    Wait For Event is a hint instruction that permits the processor to enter
+    a low-power state until one of a number of events occurs.
+ */
+#define __WFE                             __wfe
+
+
+/** \brief  Send Event
+
+    Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV                             __sev
+
+
+/** \brief  Instruction Synchronization Barrier
+
+    Instruction Synchronization Barrier flushes the pipeline in the processor,
+    so that all instructions following the ISB are fetched from cache or
+    memory, after the instruction has been completed.
+ */
+#define __ISB() do {\
+                   __schedule_barrier();\
+                   __isb(0xF);\
+                   __schedule_barrier();\
+                } while (0)
+
+/** \brief  Data Synchronization Barrier
+
+    This function acts as a special kind of Data Memory Barrier.
+    It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() do {\
+                   __schedule_barrier();\
+                   __dsb(0xF);\
+                   __schedule_barrier();\
+                } while (0)
+
+/** \brief  Data Memory Barrier
+
+    This function ensures the apparent order of the explicit memory operations before
+    and after the instruction, without ensuring their completion.
+ */
+#define __DMB() do {\
+                   __schedule_barrier();\
+                   __dmb(0xF);\
+                   __schedule_barrier();\
+                } while (0)
+
+/** \brief  Reverse byte order (32 bit)
+
+    This function reverses the byte order in integer value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#define __REV                             __rev
+
+
+/** \brief  Reverse byte order (16 bit)
+
+    This function reverses the byte order in two unsigned short values.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+  rev16 r0, r0
+  bx lr
+}
+#endif
+
+/** \brief  Reverse byte order in signed short value
+
+    This function reverses the byte order in a signed short value with sign extension to integer.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+  revsh r0, r0
+  bx lr
+}
+#endif
+
+
+/** \brief  Rotate Right in unsigned value (32 bit)
+
+    This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+    \param [in]    value  Value to rotate
+    \param [in]    value  Number of Bits to rotate
+    \return               Rotated value
+ */
+#define __ROR                             __ror
+
+
+/** \brief  Breakpoint
+
+    This function causes the processor to enter Debug state.
+    Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+    \param [in]    value  is ignored by the processor.
+                   If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __breakpoint(value)
+
+
+/** \brief  Reverse bit order of value
+
+    This function reverses the bit order of the given value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+#if       (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+  #define __RBIT                          __rbit
+#else
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+  uint32_t result;
+  int32_t s = 4 /*sizeof(v)*/ * 8 - 1; // extra shift needed at end
+
+  result = value;                      // r will be reversed bits of v; first get LSB of v
+  for (value >>= 1; value; value >>= 1)
+  {
+    result <<= 1;
+    result |= value & 1;
+    s--;
+  }
+  result <<= s;                       // shift when v's highest bits are zero
+  return(result);
+}
+#endif
+
+
+/** \brief  Count leading zeros
+
+    This function counts the number of leading zeros of a data value.
+
+    \param [in]  value  Value to count the leading zeros
+    \return             number of leading zeros in value
+ */
+#define __CLZ                             __clz
+
+
+#if       (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief  LDR Exclusive (8 bit)
+
+    This function executes a exclusive LDR instruction for 8 bit value.
+
+    \param [in]    ptr  Pointer to data
+    \return             value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr)                     ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief  LDR Exclusive (16 bit)
+
+    This function executes a exclusive LDR instruction for 16 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr)                     ((uint16_t) __ldrex(ptr))
+
+
+/** \brief  LDR Exclusive (32 bit)
+
+    This function executes a exclusive LDR instruction for 32 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr)                     ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief  STR Exclusive (8 bit)
+
+    This function executes a exclusive STR instruction for 8 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+#define __STREXB(value, ptr)              __strex(value, ptr)
+
+
+/** \brief  STR Exclusive (16 bit)
+
+    This function executes a exclusive STR instruction for 16 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+#define __STREXH(value, ptr)              __strex(value, ptr)
+
+
+/** \brief  STR Exclusive (32 bit)
+
+    This function executes a exclusive STR instruction for 32 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+#define __STREXW(value, ptr)              __strex(value, ptr)
+
+
+/** \brief  Remove the exclusive lock
+
+    This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX                           __clrex
+
+
+/** \brief  Signed Saturate
+
+    This function saturates a signed value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (1..32)
+    \return             Saturated value
+ */
+#define __SSAT                            __ssat
+
+
+/** \brief  Unsigned Saturate
+
+    This function saturates an unsigned value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (0..31)
+    \return             Saturated value
+ */
+#define __USAT                            __usat
+
+
+/** \brief  Rotate Right with Extend (32 bit)
+
+    This function moves each bit of a bitstring right by one bit.
+    The carry input is shifted in at the left end of the bitstring.
+
+    \param [in]    value  Value to rotate
+    \return               Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+  rrx r0, r0
+  bx lr
+}
+#endif
+
+
+/** \brief  LDRT Unprivileged (8 bit)
+
+    This function executes a Unprivileged LDRT instruction for 8 bit value.
+
+    \param [in]    ptr  Pointer to data
+    \return             value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr)                      ((uint8_t )  __ldrt(ptr))
+
+
+/** \brief  LDRT Unprivileged (16 bit)
+
+    This function executes a Unprivileged LDRT instruction for 16 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr)                      ((uint16_t)  __ldrt(ptr))
+
+
+/** \brief  LDRT Unprivileged (32 bit)
+
+    This function executes a Unprivileged LDRT instruction for 32 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr)                       ((uint32_t ) __ldrt(ptr))
+
+
+/** \brief  STRT Unprivileged (8 bit)
+
+    This function executes a Unprivileged STRT instruction for 8 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+ */
+#define __STRBT(value, ptr)               __strt(value, ptr)
+
+
+/** \brief  STRT Unprivileged (16 bit)
+
+    This function executes a Unprivileged STRT instruction for 16 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+ */
+#define __STRHT(value, ptr)               __strt(value, ptr)
+
+
+/** \brief  STRT Unprivileged (32 bit)
+
+    This function executes a Unprivileged STRT instruction for 32 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+ */
+#define __STRT(value, ptr)                __strt(value, ptr)
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief  No Operation
+
+    No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __NOP(void)
+{
+  __ASM volatile ("nop");
+}
+
+
+/** \brief  Wait For Interrupt
+
+    Wait For Interrupt is a hint instruction that suspends execution
+    until one of a number of events occurs.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __WFI(void)
+{
+  __ASM volatile ("wfi");
+}
+
+
+/** \brief  Wait For Event
+
+    Wait For Event is a hint instruction that permits the processor to enter
+    a low-power state until one of a number of events occurs.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __WFE(void)
+{
+  __ASM volatile ("wfe");
+}
+
+
+/** \brief  Send Event
+
+    Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __SEV(void)
+{
+  __ASM volatile ("sev");
+}
+
+
+/** \brief  Instruction Synchronization Barrier
+
+    Instruction Synchronization Barrier flushes the pipeline in the processor,
+    so that all instructions following the ISB are fetched from cache or
+    memory, after the instruction has been completed.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __ISB(void)
+{
+  __ASM volatile ("isb 0xF":::"memory");
+}
+
+
+/** \brief  Data Synchronization Barrier
+
+    This function acts as a special kind of Data Memory Barrier.
+    It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __DSB(void)
+{
+  __ASM volatile ("dsb 0xF":::"memory");
+}
+
+
+/** \brief  Data Memory Barrier
+
+    This function ensures the apparent order of the explicit memory operations before
+    and after the instruction, without ensuring their completion.
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __DMB(void)
+{
+  __ASM volatile ("dmb 0xF":::"memory");
+}
+
+
+/** \brief  Reverse byte order (32 bit)
+
+    This function reverses the byte order in integer value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+  return __builtin_bswap32(value);
+#else
+  uint32_t result;
+
+  __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+#endif
+}
+
+
+/** \brief  Reverse byte order (16 bit)
+
+    This function reverses the byte order in two unsigned short values.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+  uint32_t result;
+
+  __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+}
+
+
+/** \brief  Reverse byte order in signed short value
+
+    This function reverses the byte order in a signed short value with sign extension to integer.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+  return (short)__builtin_bswap16(value);
+#else
+  uint32_t result;
+
+  __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+#endif
+}
+
+
+/** \brief  Rotate Right in unsigned value (32 bit)
+
+    This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+    \param [in]    value  Value to rotate
+    \param [in]    value  Number of Bits to rotate
+    \return               Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+  return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief  Breakpoint
+
+    This function causes the processor to enter Debug state.
+    Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+    \param [in]    value  is ignored by the processor.
+                   If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value)                       __ASM volatile ("bkpt "#value)
+
+
+/** \brief  Reverse bit order of value
+
+    This function reverses the bit order of the given value.
+
+    \param [in]    value  Value to reverse
+    \return               Reversed value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+  uint32_t result;
+
+#if       (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+   __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+#else
+  int32_t s = 4 /*sizeof(v)*/ * 8 - 1; // extra shift needed at end
+
+  result = value;                      // r will be reversed bits of v; first get LSB of v
+  for (value >>= 1; value; value >>= 1)
+  {
+    result <<= 1;
+    result |= value & 1;
+    s--;
+  }
+  result <<= s;                       // shift when v's highest bits are zero
+#endif
+  return(result);
+}
+
+
+/** \brief  Count leading zeros
+
+    This function counts the number of leading zeros of a data value.
+
+    \param [in]  value  Value to count the leading zeros
+    \return             number of leading zeros in value
+ */
+#define __CLZ             __builtin_clz
+
+
+#if       (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief  LDR Exclusive (8 bit)
+
+    This function executes a exclusive LDR instruction for 8 bit value.
+
+    \param [in]    ptr  Pointer to data
+    \return             value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return ((uint8_t) result);    /* Add explicit type cast here */
+}
+
+
+/** \brief  LDR Exclusive (16 bit)
+
+    This function executes a exclusive LDR instruction for 16 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return ((uint16_t) result);    /* Add explicit type cast here */
+}
+
+
+/** \brief  LDR Exclusive (32 bit)
+
+    This function executes a exclusive LDR instruction for 32 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+   return(result);
+}
+
+
+/** \brief  STR Exclusive (8 bit)
+
+    This function executes a exclusive STR instruction for 8 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+   return(result);
+}
+
+
+/** \brief  STR Exclusive (16 bit)
+
+    This function executes a exclusive STR instruction for 16 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+   return(result);
+}
+
+
+/** \brief  STR Exclusive (32 bit)
+
+    This function executes a exclusive STR instruction for 32 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+    \return          0  Function succeeded
+    \return          1  Function failed
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+   uint32_t result;
+
+   __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+   return(result);
+}
+
+
+/** \brief  Remove the exclusive lock
+
+    This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __CLREX(void)
+{
+  __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief  Signed Saturate
+
+    This function saturates a signed value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (1..32)
+    \return             Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("ssat %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+
+/** \brief  Unsigned Saturate
+
+    This function saturates an unsigned value.
+
+    \param [in]  value  Value to be saturated
+    \param [in]    sat  Bit position to saturate to (0..31)
+    \return             Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("usat %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+
+/** \brief  Rotate Right with Extend (32 bit)
+
+    This function moves each bit of a bitstring right by one bit.
+    The carry input is shifted in at the left end of the bitstring.
+
+    \param [in]    value  Value to rotate
+    \return               Rotated value
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+  uint32_t result;
+
+  __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+  return(result);
+}
+
+
+/** \brief  LDRT Unprivileged (8 bit)
+
+    This function executes a Unprivileged LDRT instruction for 8 bit value.
+
+    \param [in]    ptr  Pointer to data
+    \return             value of type uint8_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return ((uint8_t) result);    /* Add explicit type cast here */
+}
+
+
+/** \brief  LDRT Unprivileged (16 bit)
+
+    This function executes a Unprivileged LDRT instruction for 16 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint16_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr)
+{
+    uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+   __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+    /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+       accepted by assembler. So has to use following less efficient pattern.
+    */
+   __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+   return ((uint16_t) result);    /* Add explicit type cast here */
+}
+
+
+/** \brief  LDRT Unprivileged (32 bit)
+
+    This function executes a Unprivileged LDRT instruction for 32 bit values.
+
+    \param [in]    ptr  Pointer to data
+    \return        value of type uint32_t at (*ptr)
+ */
+__attribute__((always_inline)) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr)
+{
+    uint32_t result;
+
+   __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) );
+   return(result);
+}
+
+
+/** \brief  STRT Unprivileged (8 bit)
+
+    This function executes a Unprivileged STRT instruction for 8 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr)
+{
+   __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/** \brief  STRT Unprivileged (16 bit)
+
+    This function executes a Unprivileged STRT instruction for 16 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr)
+{
+   __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/** \brief  STRT Unprivileged (32 bit)
+
+    This function executes a Unprivileged STRT instruction for 32 bit values.
+
+    \param [in]  value  Value to store
+    \param [in]    ptr  Pointer to location
+ */
+__attribute__((always_inline)) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr)
+{
+   __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) );
+}
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include <cmsis_csm.h>
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_cmSimd.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,697 @@
+/**************************************************************************//**
+ * @file     core_cmSimd.h
+ * @brief    CMSIS Cortex-M SIMD Header File
+ * @version  V4.10
+ * @date     18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CMSIMD_H
+#define __CORE_CMSIMD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ###################  Compiler specific Intrinsics  ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+  Access to dedicated SIMD instructions
+  @{
+*/
+
+#if   defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+#define __SADD8                           __sadd8
+#define __QADD8                           __qadd8
+#define __SHADD8                          __shadd8
+#define __UADD8                           __uadd8
+#define __UQADD8                          __uqadd8
+#define __UHADD8                          __uhadd8
+#define __SSUB8                           __ssub8
+#define __QSUB8                           __qsub8
+#define __SHSUB8                          __shsub8
+#define __USUB8                           __usub8
+#define __UQSUB8                          __uqsub8
+#define __UHSUB8                          __uhsub8
+#define __SADD16                          __sadd16
+#define __QADD16                          __qadd16
+#define __SHADD16                         __shadd16
+#define __UADD16                          __uadd16
+#define __UQADD16                         __uqadd16
+#define __UHADD16                         __uhadd16
+#define __SSUB16                          __ssub16
+#define __QSUB16                          __qsub16
+#define __SHSUB16                         __shsub16
+#define __USUB16                          __usub16
+#define __UQSUB16                         __uqsub16
+#define __UHSUB16                         __uhsub16
+#define __SASX                            __sasx
+#define __QASX                            __qasx
+#define __SHASX                           __shasx
+#define __UASX                            __uasx
+#define __UQASX                           __uqasx
+#define __UHASX                           __uhasx
+#define __SSAX                            __ssax
+#define __QSAX                            __qsax
+#define __SHSAX                           __shsax
+#define __USAX                            __usax
+#define __UQSAX                           __uqsax
+#define __UHSAX                           __uhsax
+#define __USAD8                           __usad8
+#define __USADA8                          __usada8
+#define __SSAT16                          __ssat16
+#define __USAT16                          __usat16
+#define __UXTB16                          __uxtb16
+#define __UXTAB16                         __uxtab16
+#define __SXTB16                          __sxtb16
+#define __SXTAB16                         __sxtab16
+#define __SMUAD                           __smuad
+#define __SMUADX                          __smuadx
+#define __SMLAD                           __smlad
+#define __SMLADX                          __smladx
+#define __SMLALD                          __smlald
+#define __SMLALDX                         __smlaldx
+#define __SMUSD                           __smusd
+#define __SMUSDX                          __smusdx
+#define __SMLSD                           __smlsd
+#define __SMLSDX                          __smlsdx
+#define __SMLSLD                          __smlsld
+#define __SMLSLDX                         __smlsldx
+#define __SEL                             __sel
+#define __QADD                            __qadd
+#define __QSUB                            __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0x0000FFFFUL) |  \
+                                           ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL)  )
+
+#define __PKHTB(ARG1,ARG2,ARG3)          ( ((((uint32_t)(ARG1))          ) & 0xFFFF0000UL) |  \
+                                           ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL)  )
+
+#define __SMMLA(ARG1,ARG2,ARG3)          ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+                                                      ((int64_t)(ARG3) << 32)      ) >> 32))
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1); \
+  __ASM ("usat16 %0, %1, %2" : "=r" (__RES) :  "I" (ARG2), "r" (__ARG1) ); \
+  __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+  uint32_t result;
+
+  __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+  uint32_t result;
+
+  __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   // Little endian
+  __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               // Big endian
+  __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLALDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   // Little endian
+  __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               // Big endian
+  __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+  uint32_t result;
+
+  __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLD (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   // Little endian
+  __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               // Big endian
+  __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint64_t __SMLSLDX (uint32_t op1, uint32_t op2, uint64_t acc)
+{
+  union llreg_u{
+    uint32_t w32[2];
+    uint64_t w64;
+  } llr;
+  llr.w64 = acc;
+
+#ifndef __ARMEB__   // Little endian
+  __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[0]), "=r" (llr.w32[1]): "r" (op1), "r" (op2) , "0" (llr.w32[0]), "1" (llr.w32[1]) );
+#else               // Big endian
+  __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (llr.w32[1]), "=r" (llr.w32[0]): "r" (op1), "r" (op2) , "0" (llr.w32[1]), "1" (llr.w32[0]) );
+#endif
+
+  return(llr.w64);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL  (uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+  uint32_t result;
+
+  __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+  return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+  __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2), "I" (ARG3)  ); \
+  __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({                          \
+  uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+  if (ARG3 == 0) \
+    __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2)  ); \
+  else \
+    __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) :  "r" (__ARG1), "r" (__ARG2), "I" (ARG3)  ); \
+  __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r"  (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/* not yet supported */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include <cmsis_csm.h>
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CMSIMD_H */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_sc000.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,864 @@
+/**************************************************************************//**
+ * @file     core_sc000.h
+ * @brief    CMSIS SC000 Core Peripheral Access Layer Header File
+ * @version  V4.10
+ * @date     18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_SC000_H_GENERIC
+#define __CORE_SC000_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/** \ingroup SC000
+  @{
+ */
+
+/*  CMSIS SC000 definitions */
+#define __SC000_CMSIS_VERSION_MAIN  (0x04)                                   /*!< [31:16] CMSIS HAL main version */
+#define __SC000_CMSIS_VERSION_SUB   (0x00)                                   /*!< [15:0]  CMSIS HAL sub version  */
+#define __SC000_CMSIS_VERSION       ((__SC000_CMSIS_VERSION_MAIN << 16) | \
+                                      __SC000_CMSIS_VERSION_SUB          )   /*!< CMSIS HAL version number       */
+
+#define __CORTEX_SC                 (000)                                       /*!< Cortex secure core             */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TMS470__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __CSMC__ )
+  #define __packed
+  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler      */
+  #define __INLINE         inline                                    /*use -pc99 on compile line !< inline keyword for COSMIC Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TMS470__ )
+  #if defined __TI__VFP_SUPPORT____
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )		/* Cosmic */
+  #if ( __CSMC__ & 0x400)		// FPU present for parser
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+#endif
+
+#include <stdint.h>                      /* standard types definitions                      */
+#include <core_cmInstr.h>                /* Core Instruction Access                         */
+#include <core_cmFunc.h>                 /* Core Function Access                            */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC000_H_DEPENDANT
+#define __CORE_SC000_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __SC000_REV
+    #define __SC000_REV             0x0000
+    #warning "__SC000_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          2
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*@} end of group SC000 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+    \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_CORE  Status and Control Registers
+    \brief  Core Register type definitions.
+  @{
+ */
+
+/** \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:28;              /*!< bit:  0..27  Reserved                           */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31                                             /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30                                             /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29                                             /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28                                             /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+
+/** \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0                                             /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved                           */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0)          */
+    uint32_t _reserved1:3;               /*!< bit: 25..27  Reserved                           */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31                                             /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30                                             /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29                                             /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28                                             /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_T_Pos                         24                                             /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0                                             /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:1;               /*!< bit:      0  Reserved                           */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used                   */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1                                             /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+    \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IO uint32_t ISER[1];                 /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register           */
+       uint32_t RESERVED0[31];
+  __IO uint32_t ICER[1];                 /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register          */
+       uint32_t RSERVED1[31];
+  __IO uint32_t ISPR[1];                 /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register           */
+       uint32_t RESERVED2[31];
+  __IO uint32_t ICPR[1];                 /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register         */
+       uint32_t RESERVED3[31];
+       uint32_t RESERVED4[64];
+  __IO uint32_t IP[8];                   /*!< Offset: 0x300 (R/W)  Interrupt Priority Register              */
+}  NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCB     System Control Block (SCB)
+    \brief      Type definitions for the System Control Block Registers
+  @{
+ */
+
+/** \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __I  uint32_t CPUID;                   /*!< Offset: 0x000 (R/ )  CPUID Base Register                                   */
+  __IO uint32_t ICSR;                    /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register                  */
+  __IO uint32_t VTOR;                    /*!< Offset: 0x008 (R/W)  Vector Table Offset Register                          */
+  __IO uint32_t AIRCR;                   /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register      */
+  __IO uint32_t SCR;                     /*!< Offset: 0x010 (R/W)  System Control Register                               */
+  __IO uint32_t CCR;                     /*!< Offset: 0x014 (R/W)  Configuration Control Register                        */
+       uint32_t RESERVED0[1];
+  __IO uint32_t SHP[2];                  /*!< Offset: 0x01C (R/W)  System Handlers Priority Registers. [0] is RESERVED   */
+  __IO uint32_t SHCSR;                   /*!< Offset: 0x024 (R/W)  System Handler Control and State Register             */
+       uint32_t RESERVED1[154];
+  __IO uint32_t SFCR;                    /*!< Offset: 0x290 (R/W)  Security Features Control Register                    */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24                                             /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20                                             /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16                                             /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4                                             /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0                                             /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31                                             /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28                                             /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27                                             /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26                                             /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25                                             /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23                                             /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22                                             /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12                                             /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0                                             /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos                 7                                             /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos)           /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16                                             /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16                                             /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15                                             /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2                                             /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1                                             /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4                                             /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2                                             /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1                                             /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9                                             /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3                                             /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos         15                                             /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+    \brief      Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/** \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+       uint32_t RESERVED0[2];
+  __IO uint32_t ACTLR;                   /*!< Offset: 0x008 (R/W)  Auxiliary Control Register      */
+} SCnSCB_Type;
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISMCYCINT_Pos         0                                          /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk        (1UL /*<< SCnSCB_ACTLR_DISMCYCINT_Pos*/)    /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+    \brief      Type definitions for the System Timer Registers.
+  @{
+ */
+
+/** \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                    /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                     /*!< Offset: 0x008 (R/W)  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                   /*!< Offset: 0x00C (R/ )  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+    \brief      Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/** \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __I  uint32_t TYPE;                    /*!< Offset: 0x000 (R/ )  MPU Type Register                              */
+  __IO uint32_t CTRL;                    /*!< Offset: 0x004 (R/W)  MPU Control Register                           */
+  __IO uint32_t RNR;                     /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register                     */
+  __IO uint32_t RBAR;                    /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register               */
+  __IO uint32_t RASR;                    /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register         */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos               16                                             /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8                                             /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0                                             /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos             2                                             /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1                                             /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0                                             /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos                  0                                             /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos                   8                                             /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0xFFFFFFUL << MPU_RBAR_ADDR_Pos)              /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4                                             /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0                                             /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos                 16                                             /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28                                             /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24                                             /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19                                             /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18                                             /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17                                             /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16                                             /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8                                             /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1                                             /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0                                             /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+    \brief      SC000 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+                are only accessible over DAP and not via processor. Therefore
+                they are not covered by the Cortex-M0 header file.
+  @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_core_base     Core Definitions
+    \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of SC000 Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address              */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address                 */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct           */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct       */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct          */
+
+#if (__MPU_PRESENT == 1)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit             */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit             */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+    \brief      Functions that manage interrupts and exceptions via the NVIC.
+    @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M                   */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn)         (  ((((uint32_t)(int32_t)(IRQn))         )      &  0x03UL) * 8UL)
+#define _SHP_IDX(IRQn)           ( (((((uint32_t)(int32_t)(IRQn)) & 0x0FUL)-8UL) >>    2UL)      )
+#define _IP_IDX(IRQn)            (   (((uint32_t)(int32_t)(IRQn))                >>    2UL)      )
+
+
+/** \brief  Enable External Interrupt
+
+    The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Disable External Interrupt
+
+    The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Get Pending Interrupt
+
+    The function reads the pending register in the NVIC and returns the pending bit
+    for the specified interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not pending.
+    \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->ISPR[0] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief  Set Pending Interrupt
+
+    The function sets the pending bit of an external interrupt.
+
+    \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Clear Pending Interrupt
+
+    The function clears the pending bit of an external interrupt.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[0] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Set Interrupt Priority
+
+    The function sets the priority of an interrupt.
+
+    \note The priority cannot be set for every core interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+    \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if((int32_t)(IRQn) < 0) {
+    SCB->SHP[_SHP_IDX(IRQn)] = ((uint32_t)(SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+  else {
+    NVIC->IP[_IP_IDX(IRQn)]  = ((uint32_t)(NVIC->IP[_IP_IDX(IRQn)]  & ~(0xFFUL << _BIT_SHIFT(IRQn))) |
+       (((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL) << _BIT_SHIFT(IRQn)));
+  }
+}
+
+
+/** \brief  Get Interrupt Priority
+
+    The function reads the priority of an interrupt. The interrupt
+    number can be positive to specify an external (device specific)
+    interrupt, or negative to specify an internal (core) interrupt.
+
+
+    \param [in]   IRQn  Interrupt number.
+    \return             Interrupt Priority. Value is aligned automatically to the implemented
+                        priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if((int32_t)(IRQn) < 0) {
+    return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+  }
+  else {
+    return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & (uint32_t)0xFFUL) >> (8 - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/** \brief  System Reset
+
+    The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                     /* Ensure all outstanding memory accesses included
+                                                                  buffered write are completed before reset */
+  SCB->AIRCR  = ((0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                 SCB_AIRCR_SYSRESETREQ_Msk);
+  __DSB();                                                     /* Ensure completion of memory access */
+  while(1) { __NOP(); }                                        /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+    \brief      Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief  System Tick Configuration
+
+    The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+    Counter is in free running mode to generate periodic interrupts.
+
+    \param [in]  ticks  Number of ticks between two interrupts.
+
+    \return          0  Function succeeded.
+    \return          1  Function failed.
+
+    \note     When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+    function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+    must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) {return (1UL);}      /* Reload value impossible */
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC000_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/core_sc300.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,1675 @@
+/**************************************************************************//**
+ * @file     core_sc300.h
+ * @brief    CMSIS SC300 Core Peripheral Access Layer Header File
+ * @version  V4.10
+ * @date     18. March 2015
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2015 ARM LIMITED
+
+   All rights reserved.
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in the
+     documentation and/or other materials provided with the distribution.
+   - Neither the name of ARM nor the names of its contributors may be used
+     to endorse or promote products derived from this software without
+     specific prior written permission.
+   *
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+   ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+   ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include  /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_SC300_H_GENERIC
+#define __CORE_SC300_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions  MISRA-C:2004 Compliance Exceptions
+  CMSIS violates the following MISRA-C:2004 rules:
+
+   \li Required Rule 8.5, object/function definition in header file.<br>
+     Function definitions in header files are used to allow 'inlining'.
+
+   \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+     Unions are used for effective representation of core registers.
+
+   \li Advisory Rule 19.7, Function-like macro defined.<br>
+     Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ *                 CMSIS definitions
+ ******************************************************************************/
+/** \ingroup SC3000
+  @{
+ */
+
+/*  CMSIS SC300 definitions */
+#define __SC300_CMSIS_VERSION_MAIN  (0x04)                                   /*!< [31:16] CMSIS HAL main version */
+#define __SC300_CMSIS_VERSION_SUB   (0x00)                                   /*!< [15:0]  CMSIS HAL sub version  */
+#define __SC300_CMSIS_VERSION       ((__SC300_CMSIS_VERSION_MAIN << 16) | \
+                                      __SC300_CMSIS_VERSION_SUB          )   /*!< CMSIS HAL version number       */
+
+#define __CORTEX_SC                 (300)                                     /*!< Cortex secure core             */
+
+
+#if   defined ( __CC_ARM )
+  #define __ASM            __asm                                      /*!< asm keyword for ARM Compiler          */
+  #define __INLINE         __inline                                   /*!< inline keyword for ARM Compiler       */
+  #define __STATIC_INLINE  static __inline
+
+#elif defined ( __GNUC__ )
+  #define __ASM            __asm                                      /*!< asm keyword for GNU Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for GNU Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __ICCARM__ )
+  #define __ASM            __asm                                      /*!< asm keyword for IAR Compiler          */
+  #define __INLINE         inline                                     /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TMS470__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TI CCS Compiler       */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __TASKING__ )
+  #define __ASM            __asm                                      /*!< asm keyword for TASKING Compiler      */
+  #define __INLINE         inline                                     /*!< inline keyword for TASKING Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#elif defined ( __CSMC__ )
+  #define __packed
+  #define __ASM            _asm                                      /*!< asm keyword for COSMIC Compiler      */
+  #define __INLINE         inline                                    /*use -pc99 on compile line !< inline keyword for COSMIC Compiler   */
+  #define __STATIC_INLINE  static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+    This core does not support an FPU at all
+*/
+#define __FPU_USED       0
+
+#if defined ( __CC_ARM )
+  #if defined __TARGET_FPU_VFP
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __GNUC__ )
+  #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __ICCARM__ )
+  #if defined __ARMVFP__
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TMS470__ )
+  #if defined __TI__VFP_SUPPORT____
+    #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __TASKING__ )
+  #if defined __FPU_VFP__
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+
+#elif defined ( __CSMC__ )		/* Cosmic */
+  #if ( __CSMC__ & 0x400)		// FPU present for parser
+    #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+  #endif
+#endif
+
+#include <stdint.h>                      /* standard types definitions                      */
+#include <core_cmInstr.h>                /* Core Instruction Access                         */
+#include <core_cmFunc.h>                 /* Core Function Access                            */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_SC300_H_DEPENDANT
+#define __CORE_SC300_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+  #ifndef __SC300_REV
+    #define __SC300_REV               0x0000
+    #warning "__SC300_REV not defined in device header file; using default!"
+  #endif
+
+  #ifndef __MPU_PRESENT
+    #define __MPU_PRESENT             0
+    #warning "__MPU_PRESENT not defined in device header file; using default!"
+  #endif
+
+  #ifndef __NVIC_PRIO_BITS
+    #define __NVIC_PRIO_BITS          4
+    #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+  #endif
+
+  #ifndef __Vendor_SysTickConfig
+    #define __Vendor_SysTickConfig    0
+    #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+  #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+    \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+    <strong>IO Type Qualifiers</strong> are used
+    \li to specify the access to peripheral variables.
+    \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+  #define   __I     volatile             /*!< Defines 'read only' permissions                 */
+#else
+  #define   __I     volatile const       /*!< Defines 'read only' permissions                 */
+#endif
+#define     __O     volatile             /*!< Defines 'write only' permissions                */
+#define     __IO    volatile             /*!< Defines 'read / write' permissions              */
+
+/*@} end of group SC300 */
+
+
+
+/*******************************************************************************
+ *                 Register Abstraction
+  Core Register contain:
+  - Core Register
+  - Core NVIC Register
+  - Core SCB Register
+  - Core SysTick Register
+  - Core Debug Register
+  - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+    \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_CORE  Status and Control Registers
+    \brief  Core Register type definitions.
+  @{
+ */
+
+/** \brief  Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t _reserved0:27;              /*!< bit:  0..26  Reserved                           */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} APSR_Type;
+
+/* APSR Register Definitions */
+#define APSR_N_Pos                         31                                             /*!< APSR: N Position */
+#define APSR_N_Msk                         (1UL << APSR_N_Pos)                            /*!< APSR: N Mask */
+
+#define APSR_Z_Pos                         30                                             /*!< APSR: Z Position */
+#define APSR_Z_Msk                         (1UL << APSR_Z_Pos)                            /*!< APSR: Z Mask */
+
+#define APSR_C_Pos                         29                                             /*!< APSR: C Position */
+#define APSR_C_Msk                         (1UL << APSR_C_Pos)                            /*!< APSR: C Mask */
+
+#define APSR_V_Pos                         28                                             /*!< APSR: V Position */
+#define APSR_V_Msk                         (1UL << APSR_V_Pos)                            /*!< APSR: V Mask */
+
+#define APSR_Q_Pos                         27                                             /*!< APSR: Q Position */
+#define APSR_Q_Msk                         (1UL << APSR_Q_Pos)                            /*!< APSR: Q Mask */
+
+
+/** \brief  Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:23;              /*!< bit:  9..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} IPSR_Type;
+
+/* IPSR Register Definitions */
+#define IPSR_ISR_Pos                        0                                             /*!< IPSR: ISR Position */
+#define IPSR_ISR_Msk                       (0x1FFUL /*<< IPSR_ISR_Pos*/)                  /*!< IPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t ISR:9;                      /*!< bit:  0.. 8  Exception number                   */
+    uint32_t _reserved0:15;              /*!< bit:  9..23  Reserved                           */
+    uint32_t T:1;                        /*!< bit:     24  Thumb bit        (read 0)          */
+    uint32_t IT:2;                       /*!< bit: 25..26  saved IT state   (read 0)          */
+    uint32_t Q:1;                        /*!< bit:     27  Saturation condition flag          */
+    uint32_t V:1;                        /*!< bit:     28  Overflow condition code flag       */
+    uint32_t C:1;                        /*!< bit:     29  Carry condition code flag          */
+    uint32_t Z:1;                        /*!< bit:     30  Zero condition code flag           */
+    uint32_t N:1;                        /*!< bit:     31  Negative condition code flag       */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} xPSR_Type;
+
+/* xPSR Register Definitions */
+#define xPSR_N_Pos                         31                                             /*!< xPSR: N Position */
+#define xPSR_N_Msk                         (1UL << xPSR_N_Pos)                            /*!< xPSR: N Mask */
+
+#define xPSR_Z_Pos                         30                                             /*!< xPSR: Z Position */
+#define xPSR_Z_Msk                         (1UL << xPSR_Z_Pos)                            /*!< xPSR: Z Mask */
+
+#define xPSR_C_Pos                         29                                             /*!< xPSR: C Position */
+#define xPSR_C_Msk                         (1UL << xPSR_C_Pos)                            /*!< xPSR: C Mask */
+
+#define xPSR_V_Pos                         28                                             /*!< xPSR: V Position */
+#define xPSR_V_Msk                         (1UL << xPSR_V_Pos)                            /*!< xPSR: V Mask */
+
+#define xPSR_Q_Pos                         27                                             /*!< xPSR: Q Position */
+#define xPSR_Q_Msk                         (1UL << xPSR_Q_Pos)                            /*!< xPSR: Q Mask */
+
+#define xPSR_IT_Pos                        25                                             /*!< xPSR: IT Position */
+#define xPSR_IT_Msk                        (3UL << xPSR_IT_Pos)                           /*!< xPSR: IT Mask */
+
+#define xPSR_T_Pos                         24                                             /*!< xPSR: T Position */
+#define xPSR_T_Msk                         (1UL << xPSR_T_Pos)                            /*!< xPSR: T Mask */
+
+#define xPSR_ISR_Pos                        0                                             /*!< xPSR: ISR Position */
+#define xPSR_ISR_Msk                       (0x1FFUL /*<< xPSR_ISR_Pos*/)                  /*!< xPSR: ISR Mask */
+
+
+/** \brief  Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+  struct
+  {
+    uint32_t nPRIV:1;                    /*!< bit:      0  Execution privilege in Thread mode */
+    uint32_t SPSEL:1;                    /*!< bit:      1  Stack to be used                   */
+    uint32_t _reserved1:30;              /*!< bit:  2..31  Reserved                           */
+  } b;                                   /*!< Structure used for bit  access                  */
+  uint32_t w;                            /*!< Type      used for word access                  */
+} CONTROL_Type;
+
+/* CONTROL Register Definitions */
+#define CONTROL_SPSEL_Pos                   1                                             /*!< CONTROL: SPSEL Position */
+#define CONTROL_SPSEL_Msk                  (1UL << CONTROL_SPSEL_Pos)                     /*!< CONTROL: SPSEL Mask */
+
+#define CONTROL_nPRIV_Pos                   0                                             /*!< CONTROL: nPRIV Position */
+#define CONTROL_nPRIV_Msk                  (1UL /*<< CONTROL_nPRIV_Pos*/)                 /*!< CONTROL: nPRIV Mask */
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_NVIC  Nested Vectored Interrupt Controller (NVIC)
+    \brief      Type definitions for the NVIC Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+  __IO uint32_t ISER[8];                 /*!< Offset: 0x000 (R/W)  Interrupt Set Enable Register           */
+       uint32_t RESERVED0[24];
+  __IO uint32_t ICER[8];                 /*!< Offset: 0x080 (R/W)  Interrupt Clear Enable Register         */
+       uint32_t RSERVED1[24];
+  __IO uint32_t ISPR[8];                 /*!< Offset: 0x100 (R/W)  Interrupt Set Pending Register          */
+       uint32_t RESERVED2[24];
+  __IO uint32_t ICPR[8];                 /*!< Offset: 0x180 (R/W)  Interrupt Clear Pending Register        */
+       uint32_t RESERVED3[24];
+  __IO uint32_t IABR[8];                 /*!< Offset: 0x200 (R/W)  Interrupt Active bit Register           */
+       uint32_t RESERVED4[56];
+  __IO uint8_t  IP[240];                 /*!< Offset: 0x300 (R/W)  Interrupt Priority Register (8Bit wide) */
+       uint32_t RESERVED5[644];
+  __O  uint32_t STIR;                    /*!< Offset: 0xE00 ( /W)  Software Trigger Interrupt Register     */
+}  NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos                 0                                          /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk                (0x1FFUL /*<< NVIC_STIR_INTID_Pos*/)        /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCB     System Control Block (SCB)
+    \brief      Type definitions for the System Control Block Registers
+  @{
+ */
+
+/** \brief  Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+  __I  uint32_t CPUID;                   /*!< Offset: 0x000 (R/ )  CPUID Base Register                                   */
+  __IO uint32_t ICSR;                    /*!< Offset: 0x004 (R/W)  Interrupt Control and State Register                  */
+  __IO uint32_t VTOR;                    /*!< Offset: 0x008 (R/W)  Vector Table Offset Register                          */
+  __IO uint32_t AIRCR;                   /*!< Offset: 0x00C (R/W)  Application Interrupt and Reset Control Register      */
+  __IO uint32_t SCR;                     /*!< Offset: 0x010 (R/W)  System Control Register                               */
+  __IO uint32_t CCR;                     /*!< Offset: 0x014 (R/W)  Configuration Control Register                        */
+  __IO uint8_t  SHP[12];                 /*!< Offset: 0x018 (R/W)  System Handlers Priority Registers (4-7, 8-11, 12-15) */
+  __IO uint32_t SHCSR;                   /*!< Offset: 0x024 (R/W)  System Handler Control and State Register             */
+  __IO uint32_t CFSR;                    /*!< Offset: 0x028 (R/W)  Configurable Fault Status Register                    */
+  __IO uint32_t HFSR;                    /*!< Offset: 0x02C (R/W)  HardFault Status Register                             */
+  __IO uint32_t DFSR;                    /*!< Offset: 0x030 (R/W)  Debug Fault Status Register                           */
+  __IO uint32_t MMFAR;                   /*!< Offset: 0x034 (R/W)  MemManage Fault Address Register                      */
+  __IO uint32_t BFAR;                    /*!< Offset: 0x038 (R/W)  BusFault Address Register                             */
+  __IO uint32_t AFSR;                    /*!< Offset: 0x03C (R/W)  Auxiliary Fault Status Register                       */
+  __I  uint32_t PFR[2];                  /*!< Offset: 0x040 (R/ )  Processor Feature Register                            */
+  __I  uint32_t DFR;                     /*!< Offset: 0x048 (R/ )  Debug Feature Register                                */
+  __I  uint32_t ADR;                     /*!< Offset: 0x04C (R/ )  Auxiliary Feature Register                            */
+  __I  uint32_t MMFR[4];                 /*!< Offset: 0x050 (R/ )  Memory Model Feature Register                         */
+  __I  uint32_t ISAR[5];                 /*!< Offset: 0x060 (R/ )  Instruction Set Attributes Register                   */
+       uint32_t RESERVED0[5];
+  __IO uint32_t CPACR;                   /*!< Offset: 0x088 (R/W)  Coprocessor Access Control Register                   */
+       uint32_t RESERVED1[129];
+  __IO uint32_t SFCR;                    /*!< Offset: 0x290 (R/W)  Security Features Control Register                    */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos          24                                             /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk          (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos)          /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos              20                                             /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk              (0xFUL << SCB_CPUID_VARIANT_Pos)               /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos         16                                             /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk         (0xFUL << SCB_CPUID_ARCHITECTURE_Pos)          /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos                4                                             /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk               (0xFFFUL << SCB_CPUID_PARTNO_Pos)              /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos              0                                             /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk             (0xFUL /*<< SCB_CPUID_REVISION_Pos*/)          /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos            31                                             /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk            (1UL << SCB_ICSR_NMIPENDSET_Pos)               /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos             28                                             /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk             (1UL << SCB_ICSR_PENDSVSET_Pos)                /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos             27                                             /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk             (1UL << SCB_ICSR_PENDSVCLR_Pos)                /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos             26                                             /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk             (1UL << SCB_ICSR_PENDSTSET_Pos)                /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos             25                                             /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk             (1UL << SCB_ICSR_PENDSTCLR_Pos)                /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos            23                                             /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk            (1UL << SCB_ICSR_ISRPREEMPT_Pos)               /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos            22                                             /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk            (1UL << SCB_ICSR_ISRPENDING_Pos)               /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos           12                                             /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk           (0x1FFUL << SCB_ICSR_VECTPENDING_Pos)          /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos             11                                             /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk             (1UL << SCB_ICSR_RETTOBASE_Pos)                /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos             0                                             /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk            (0x1FFUL /*<< SCB_ICSR_VECTACTIVE_Pos*/)       /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLBASE_Pos               29                                             /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk               (1UL << SCB_VTOR_TBLBASE_Pos)                  /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos                 7                                             /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk                (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos)            /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos              16                                             /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk              (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos)            /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos          16                                             /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk          (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos)        /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos            15                                             /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk            (1UL << SCB_AIRCR_ENDIANESS_Pos)               /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos              8                                             /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk             (7UL << SCB_AIRCR_PRIGROUP_Pos)                /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos           2                                             /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk          (1UL << SCB_AIRCR_SYSRESETREQ_Pos)             /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos         1                                             /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk        (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos)           /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos             0                                             /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk            (1UL /*<< SCB_AIRCR_VECTRESET_Pos*/)           /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos               4                                             /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk              (1UL << SCB_SCR_SEVONPEND_Pos)                 /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos               2                                             /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk              (1UL << SCB_SCR_SLEEPDEEP_Pos)                 /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos             1                                             /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk            (1UL << SCB_SCR_SLEEPONEXIT_Pos)               /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos                9                                             /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk               (1UL << SCB_CCR_STKALIGN_Pos)                  /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos               8                                             /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk              (1UL << SCB_CCR_BFHFNMIGN_Pos)                 /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos               4                                             /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk              (1UL << SCB_CCR_DIV_0_TRP_Pos)                 /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos             3                                             /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk            (1UL << SCB_CCR_UNALIGN_TRP_Pos)               /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos            1                                             /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk           (1UL << SCB_CCR_USERSETMPEND_Pos)              /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos          0                                             /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk         (1UL /*<< SCB_CCR_NONBASETHRDENA_Pos*/)        /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos          18                                             /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk          (1UL << SCB_SHCSR_USGFAULTENA_Pos)             /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos          17                                             /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk          (1UL << SCB_SHCSR_BUSFAULTENA_Pos)             /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos          16                                             /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk          (1UL << SCB_SHCSR_MEMFAULTENA_Pos)             /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos         15                                             /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk         (1UL << SCB_SHCSR_SVCALLPENDED_Pos)            /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos       14                                             /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk       (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos)          /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos       13                                             /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk       (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos)          /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos       12                                             /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk       (1UL << SCB_SHCSR_USGFAULTPENDED_Pos)          /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos           11                                             /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk           (1UL << SCB_SHCSR_SYSTICKACT_Pos)              /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos            10                                             /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk            (1UL << SCB_SHCSR_PENDSVACT_Pos)               /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos            8                                             /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk           (1UL << SCB_SHCSR_MONITORACT_Pos)              /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos             7                                             /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk            (1UL << SCB_SHCSR_SVCALLACT_Pos)               /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos           3                                             /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk          (1UL << SCB_SHCSR_USGFAULTACT_Pos)             /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos           1                                             /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk          (1UL << SCB_SHCSR_BUSFAULTACT_Pos)             /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos           0                                             /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk          (1UL /*<< SCB_SHCSR_MEMFAULTACT_Pos*/)         /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos            16                                             /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk            (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos)          /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos             8                                             /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk            (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos)            /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos             0                                             /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk            (0xFFUL /*<< SCB_CFSR_MEMFAULTSR_Pos*/)        /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos              31                                             /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk              (1UL << SCB_HFSR_DEBUGEVT_Pos)                 /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos                30                                             /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk                (1UL << SCB_HFSR_FORCED_Pos)                   /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos                1                                             /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk               (1UL << SCB_HFSR_VECTTBL_Pos)                  /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos               4                                             /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk              (1UL << SCB_DFSR_EXTERNAL_Pos)                 /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos                 3                                             /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk                (1UL << SCB_DFSR_VCATCH_Pos)                   /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos                2                                             /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk               (1UL << SCB_DFSR_DWTTRAP_Pos)                  /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos                   1                                             /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk                  (1UL << SCB_DFSR_BKPT_Pos)                     /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos                 0                                             /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk                (1UL /*<< SCB_DFSR_HALTED_Pos*/)               /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+    \brief      Type definitions for the System Control and ID Register not in the SCB
+  @{
+ */
+
+/** \brief  Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+       uint32_t RESERVED0[1];
+  __I  uint32_t ICTR;                    /*!< Offset: 0x004 (R/ )  Interrupt Controller Type Register      */
+       uint32_t RESERVED1[1];
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos         0                                          /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk        (0xFUL /*<< SCnSCB_ICTR_INTLINESNUM_Pos*/)  /*!< ICTR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_SysTick     System Tick Timer (SysTick)
+    \brief      Type definitions for the System Timer Registers.
+  @{
+ */
+
+/** \brief  Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  SysTick Control and Status Register */
+  __IO uint32_t LOAD;                    /*!< Offset: 0x004 (R/W)  SysTick Reload Value Register       */
+  __IO uint32_t VAL;                     /*!< Offset: 0x008 (R/W)  SysTick Current Value Register      */
+  __I  uint32_t CALIB;                   /*!< Offset: 0x00C (R/ )  SysTick Calibration Register        */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos         16                                             /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk         (1UL << SysTick_CTRL_COUNTFLAG_Pos)            /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos          2                                             /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk         (1UL << SysTick_CTRL_CLKSOURCE_Pos)            /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos            1                                             /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk           (1UL << SysTick_CTRL_TICKINT_Pos)              /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos             0                                             /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk            (1UL /*<< SysTick_CTRL_ENABLE_Pos*/)           /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos             0                                             /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk            (0xFFFFFFUL /*<< SysTick_LOAD_RELOAD_Pos*/)    /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos             0                                             /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk            (0xFFFFFFUL /*<< SysTick_VAL_CURRENT_Pos*/)    /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos            31                                             /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk            (1UL << SysTick_CALIB_NOREF_Pos)               /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos             30                                             /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk             (1UL << SysTick_CALIB_SKEW_Pos)                /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos             0                                             /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk            (0xFFFFFFUL /*<< SysTick_CALIB_TENMS_Pos*/)    /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_ITM     Instrumentation Trace Macrocell (ITM)
+    \brief      Type definitions for the Instrumentation Trace Macrocell (ITM)
+  @{
+ */
+
+/** \brief  Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+  __O  union
+  {
+    __O  uint8_t    u8;                  /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 8-bit                   */
+    __O  uint16_t   u16;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 16-bit                  */
+    __O  uint32_t   u32;                 /*!< Offset: 0x000 ( /W)  ITM Stimulus Port 32-bit                  */
+  }  PORT [32];                          /*!< Offset: 0x000 ( /W)  ITM Stimulus Port Registers               */
+       uint32_t RESERVED0[864];
+  __IO uint32_t TER;                     /*!< Offset: 0xE00 (R/W)  ITM Trace Enable Register                 */
+       uint32_t RESERVED1[15];
+  __IO uint32_t TPR;                     /*!< Offset: 0xE40 (R/W)  ITM Trace Privilege Register              */
+       uint32_t RESERVED2[15];
+  __IO uint32_t TCR;                     /*!< Offset: 0xE80 (R/W)  ITM Trace Control Register                */
+       uint32_t RESERVED3[29];
+  __O  uint32_t IWR;                     /*!< Offset: 0xEF8 ( /W)  ITM Integration Write Register            */
+  __I  uint32_t IRR;                     /*!< Offset: 0xEFC (R/ )  ITM Integration Read Register             */
+  __IO uint32_t IMCR;                    /*!< Offset: 0xF00 (R/W)  ITM Integration Mode Control Register     */
+       uint32_t RESERVED4[43];
+  __O  uint32_t LAR;                     /*!< Offset: 0xFB0 ( /W)  ITM Lock Access Register                  */
+  __I  uint32_t LSR;                     /*!< Offset: 0xFB4 (R/ )  ITM Lock Status Register                  */
+       uint32_t RESERVED5[6];
+  __I  uint32_t PID4;                    /*!< Offset: 0xFD0 (R/ )  ITM Peripheral Identification Register #4 */
+  __I  uint32_t PID5;                    /*!< Offset: 0xFD4 (R/ )  ITM Peripheral Identification Register #5 */
+  __I  uint32_t PID6;                    /*!< Offset: 0xFD8 (R/ )  ITM Peripheral Identification Register #6 */
+  __I  uint32_t PID7;                    /*!< Offset: 0xFDC (R/ )  ITM Peripheral Identification Register #7 */
+  __I  uint32_t PID0;                    /*!< Offset: 0xFE0 (R/ )  ITM Peripheral Identification Register #0 */
+  __I  uint32_t PID1;                    /*!< Offset: 0xFE4 (R/ )  ITM Peripheral Identification Register #1 */
+  __I  uint32_t PID2;                    /*!< Offset: 0xFE8 (R/ )  ITM Peripheral Identification Register #2 */
+  __I  uint32_t PID3;                    /*!< Offset: 0xFEC (R/ )  ITM Peripheral Identification Register #3 */
+  __I  uint32_t CID0;                    /*!< Offset: 0xFF0 (R/ )  ITM Component  Identification Register #0 */
+  __I  uint32_t CID1;                    /*!< Offset: 0xFF4 (R/ )  ITM Component  Identification Register #1 */
+  __I  uint32_t CID2;                    /*!< Offset: 0xFF8 (R/ )  ITM Component  Identification Register #2 */
+  __I  uint32_t CID3;                    /*!< Offset: 0xFFC (R/ )  ITM Component  Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos                0                                             /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk               (0xFUL /*<< ITM_TPR_PRIVMASK_Pos*/)            /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos                   23                                             /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk                   (1UL << ITM_TCR_BUSY_Pos)                      /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos             16                                             /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk             (0x7FUL << ITM_TCR_TraceBusID_Pos)             /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos                10                                             /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk                (3UL << ITM_TCR_GTSFREQ_Pos)                   /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos              8                                             /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk             (3UL << ITM_TCR_TSPrescale_Pos)                /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos                  4                                             /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk                 (1UL << ITM_TCR_SWOENA_Pos)                    /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos                  3                                             /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk                 (1UL << ITM_TCR_DWTENA_Pos)                    /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos                 2                                             /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk                (1UL << ITM_TCR_SYNCENA_Pos)                   /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos                   1                                             /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk                  (1UL << ITM_TCR_TSENA_Pos)                     /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos                  0                                             /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk                 (1UL /*<< ITM_TCR_ITMENA_Pos*/)                /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos                0                                             /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk               (1UL /*<< ITM_IWR_ATVALIDM_Pos*/)              /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos                0                                             /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk               (1UL /*<< ITM_IRR_ATREADYM_Pos*/)              /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos            0                                             /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk           (1UL /*<< ITM_IMCR_INTEGRATION_Pos*/)          /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos                 2                                             /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk                (1UL << ITM_LSR_ByteAcc_Pos)                   /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos                  1                                             /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk                 (1UL << ITM_LSR_Access_Pos)                    /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos                 0                                             /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk                (1UL /*<< ITM_LSR_Present_Pos*/)               /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_DWT     Data Watchpoint and Trace (DWT)
+    \brief      Type definitions for the Data Watchpoint and Trace (DWT)
+  @{
+ */
+
+/** \brief  Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+  __IO uint32_t CTRL;                    /*!< Offset: 0x000 (R/W)  Control Register                          */
+  __IO uint32_t CYCCNT;                  /*!< Offset: 0x004 (R/W)  Cycle Count Register                      */
+  __IO uint32_t CPICNT;                  /*!< Offset: 0x008 (R/W)  CPI Count Register                        */
+  __IO uint32_t EXCCNT;                  /*!< Offset: 0x00C (R/W)  Exception Overhead Count Register         */
+  __IO uint32_t SLEEPCNT;                /*!< Offset: 0x010 (R/W)  Sleep Count Register                      */
+  __IO uint32_t LSUCNT;                  /*!< Offset: 0x014 (R/W)  LSU Count Register                        */
+  __IO uint32_t FOLDCNT;                 /*!< Offset: 0x018 (R/W)  Folded-instruction Count Register         */
+  __I  uint32_t PCSR;                    /*!< Offset: 0x01C (R/ )  Program Counter Sample Register           */
+  __IO uint32_t COMP0;                   /*!< Offset: 0x020 (R/W)  Comparator Register 0                     */
+  __IO uint32_t MASK0;                   /*!< Offset: 0x024 (R/W)  Mask Register 0                           */
+  __IO uint32_t FUNCTION0;               /*!< Offset: 0x028 (R/W)  Function Register 0                       */
+       uint32_t RESERVED0[1];
+  __IO uint32_t COMP1;                   /*!< Offset: 0x030 (R/W)  Comparator Register 1                     */
+  __IO uint32_t MASK1;                   /*!< Offset: 0x034 (R/W)  Mask Register 1                           */
+  __IO uint32_t FUNCTION1;               /*!< Offset: 0x038 (R/W)  Function Register 1                       */
+       uint32_t RESERVED1[1];
+  __IO uint32_t COMP2;                   /*!< Offset: 0x040 (R/W)  Comparator Register 2                     */
+  __IO uint32_t MASK2;                   /*!< Offset: 0x044 (R/W)  Mask Register 2                           */
+  __IO uint32_t FUNCTION2;               /*!< Offset: 0x048 (R/W)  Function Register 2                       */
+       uint32_t RESERVED2[1];
+  __IO uint32_t COMP3;                   /*!< Offset: 0x050 (R/W)  Comparator Register 3                     */
+  __IO uint32_t MASK3;                   /*!< Offset: 0x054 (R/W)  Mask Register 3                           */
+  __IO uint32_t FUNCTION3;               /*!< Offset: 0x058 (R/W)  Function Register 3                       */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos               28                                          /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk               (0xFUL << DWT_CTRL_NUMCOMP_Pos)             /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos              27                                          /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk              (0x1UL << DWT_CTRL_NOTRCPKT_Pos)            /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos             26                                          /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk             (0x1UL << DWT_CTRL_NOEXTTRIG_Pos)           /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos              25                                          /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk              (0x1UL << DWT_CTRL_NOCYCCNT_Pos)            /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos              24                                          /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk              (0x1UL << DWT_CTRL_NOPRFCNT_Pos)            /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos             22                                          /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk             (0x1UL << DWT_CTRL_CYCEVTENA_Pos)           /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos            21                                          /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk            (0x1UL << DWT_CTRL_FOLDEVTENA_Pos)          /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos             20                                          /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk             (0x1UL << DWT_CTRL_LSUEVTENA_Pos)           /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos           19                                          /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk           (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos)         /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos             18                                          /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk             (0x1UL << DWT_CTRL_EXCEVTENA_Pos)           /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos             17                                          /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk             (0x1UL << DWT_CTRL_CPIEVTENA_Pos)           /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos             16                                          /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk             (0x1UL << DWT_CTRL_EXCTRCENA_Pos)           /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos            12                                          /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk            (0x1UL << DWT_CTRL_PCSAMPLENA_Pos)          /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos               10                                          /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk               (0x3UL << DWT_CTRL_SYNCTAP_Pos)             /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos                 9                                          /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk                (0x1UL << DWT_CTRL_CYCTAP_Pos)              /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos               5                                          /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk              (0xFUL << DWT_CTRL_POSTINIT_Pos)            /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos             1                                          /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk            (0xFUL << DWT_CTRL_POSTPRESET_Pos)          /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos              0                                          /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk             (0x1UL /*<< DWT_CTRL_CYCCNTENA_Pos*/)       /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos               0                                          /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk              (0xFFUL /*<< DWT_CPICNT_CPICNT_Pos*/)       /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos               0                                          /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk              (0xFFUL /*<< DWT_EXCCNT_EXCCNT_Pos*/)       /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos           0                                          /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk          (0xFFUL /*<< DWT_SLEEPCNT_SLEEPCNT_Pos*/)   /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos               0                                          /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk              (0xFFUL /*<< DWT_LSUCNT_LSUCNT_Pos*/)       /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos             0                                          /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk            (0xFFUL /*<< DWT_FOLDCNT_FOLDCNT_Pos*/)     /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos                   0                                          /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk                  (0x1FUL /*<< DWT_MASK_MASK_Pos*/)           /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos           24                                          /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk           (0x1UL << DWT_FUNCTION_MATCHED_Pos)         /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos        16                                          /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos)      /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos        12                                          /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk        (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos)      /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos         10                                          /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk         (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos)       /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos            9                                          /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk           (0x1UL << DWT_FUNCTION_LNK1ENA_Pos)         /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos         8                                          /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk        (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos)      /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos           7                                          /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk          (0x1UL << DWT_FUNCTION_CYCMATCH_Pos)        /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos          5                                          /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk         (0x1UL << DWT_FUNCTION_EMITRANGE_Pos)       /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos           0                                          /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk          (0xFUL /*<< DWT_FUNCTION_FUNCTION_Pos*/)    /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_TPI     Trace Port Interface (TPI)
+    \brief      Type definitions for the Trace Port Interface (TPI)
+  @{
+ */
+
+/** \brief  Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+  __IO uint32_t SSPSR;                   /*!< Offset: 0x000 (R/ )  Supported Parallel Port Size Register     */
+  __IO uint32_t CSPSR;                   /*!< Offset: 0x004 (R/W)  Current Parallel Port Size Register */
+       uint32_t RESERVED0[2];
+  __IO uint32_t ACPR;                    /*!< Offset: 0x010 (R/W)  Asynchronous Clock Prescaler Register */
+       uint32_t RESERVED1[55];
+  __IO uint32_t SPPR;                    /*!< Offset: 0x0F0 (R/W)  Selected Pin Protocol Register */
+       uint32_t RESERVED2[131];
+  __I  uint32_t FFSR;                    /*!< Offset: 0x300 (R/ )  Formatter and Flush Status Register */
+  __IO uint32_t FFCR;                    /*!< Offset: 0x304 (R/W)  Formatter and Flush Control Register */
+  __I  uint32_t FSCR;                    /*!< Offset: 0x308 (R/ )  Formatter Synchronization Counter Register */
+       uint32_t RESERVED3[759];
+  __I  uint32_t TRIGGER;                 /*!< Offset: 0xEE8 (R/ )  TRIGGER */
+  __I  uint32_t FIFO0;                   /*!< Offset: 0xEEC (R/ )  Integration ETM Data */
+  __I  uint32_t ITATBCTR2;               /*!< Offset: 0xEF0 (R/ )  ITATBCTR2 */
+       uint32_t RESERVED4[1];
+  __I  uint32_t ITATBCTR0;               /*!< Offset: 0xEF8 (R/ )  ITATBCTR0 */
+  __I  uint32_t FIFO1;                   /*!< Offset: 0xEFC (R/ )  Integration ITM Data */
+  __IO uint32_t ITCTRL;                  /*!< Offset: 0xF00 (R/W)  Integration Mode Control */
+       uint32_t RESERVED5[39];
+  __IO uint32_t CLAIMSET;                /*!< Offset: 0xFA0 (R/W)  Claim tag set */
+  __IO uint32_t CLAIMCLR;                /*!< Offset: 0xFA4 (R/W)  Claim tag clear */
+       uint32_t RESERVED7[8];
+  __I  uint32_t DEVID;                   /*!< Offset: 0xFC8 (R/ )  TPIU_DEVID */
+  __I  uint32_t DEVTYPE;                 /*!< Offset: 0xFCC (R/ )  TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos              0                                          /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk             (0x1FFFUL /*<< TPI_ACPR_PRESCALER_Pos*/)    /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos                 0                                          /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk                (0x3UL /*<< TPI_SPPR_TXMODE_Pos*/)          /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos              3                                          /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk             (0x1UL << TPI_FFSR_FtNonStop_Pos)           /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos              2                                          /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk             (0x1UL << TPI_FFSR_TCPresent_Pos)           /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos              1                                          /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk             (0x1UL << TPI_FFSR_FtStopped_Pos)           /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos               0                                          /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk              (0x1UL /*<< TPI_FFSR_FlInProg_Pos*/)        /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos                 8                                          /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk                (0x1UL << TPI_FFCR_TrigIn_Pos)              /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos                1                                          /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk               (0x1UL << TPI_FFCR_EnFCont_Pos)             /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos             0                                          /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk            (0x1UL /*<< TPI_TRIGGER_TRIGGER_Pos*/)      /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos          29                                          /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos)        /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos        27                                          /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk        (0x3UL << TPI_FIFO0_ITM_bytecount_Pos)      /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos          26                                          /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos)        /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos        24                                          /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk        (0x3UL << TPI_FIFO0_ETM_bytecount_Pos)      /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos                 16                                          /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk                 (0xFFUL << TPI_FIFO0_ETM2_Pos)              /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos                  8                                          /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk                 (0xFFUL << TPI_FIFO0_ETM1_Pos)              /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos                  0                                          /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk                 (0xFFUL /*<< TPI_FIFO0_ETM0_Pos*/)          /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos           0                                          /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR2_ATREADY_Pos*/)    /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos          29                                          /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos)        /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos        27                                          /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk        (0x3UL << TPI_FIFO1_ITM_bytecount_Pos)      /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos          26                                          /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk          (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos)        /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos        24                                          /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk        (0x3UL << TPI_FIFO1_ETM_bytecount_Pos)      /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos                 16                                          /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk                 (0xFFUL << TPI_FIFO1_ITM2_Pos)              /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos                  8                                          /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk                 (0xFFUL << TPI_FIFO1_ITM1_Pos)              /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos                  0                                          /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk                 (0xFFUL /*<< TPI_FIFO1_ITM0_Pos*/)          /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos           0                                          /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk          (0x1UL /*<< TPI_ITATBCTR0_ATREADY_Pos*/)    /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos                 0                                          /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk                (0x1UL /*<< TPI_ITCTRL_Mode_Pos*/)          /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos             11                                          /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk             (0x1UL << TPI_DEVID_NRZVALID_Pos)           /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos            10                                          /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk            (0x1UL << TPI_DEVID_MANCVALID_Pos)          /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos             9                                          /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk            (0x1UL << TPI_DEVID_PTINVALID_Pos)          /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos              6                                          /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk             (0x7UL << TPI_DEVID_MinBufSz_Pos)           /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos             5                                          /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk            (0x1UL << TPI_DEVID_AsynClkIn_Pos)          /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos          0                                          /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk         (0x1FUL /*<< TPI_DEVID_NrTraceInput_Pos*/)  /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_MajorType_Pos           4                                          /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk          (0xFUL << TPI_DEVTYPE_MajorType_Pos)        /*!< TPI DEVTYPE: MajorType Mask */
+
+#define TPI_DEVTYPE_SubType_Pos             0                                          /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk            (0xFUL /*<< TPI_DEVTYPE_SubType_Pos*/)      /*!< TPI DEVTYPE: SubType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_MPU     Memory Protection Unit (MPU)
+    \brief      Type definitions for the Memory Protection Unit (MPU)
+  @{
+ */
+
+/** \brief  Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+  __I  uint32_t TYPE;                    /*!< Offset: 0x000 (R/ )  MPU Type Register                              */
+  __IO uint32_t CTRL;                    /*!< Offset: 0x004 (R/W)  MPU Control Register                           */
+  __IO uint32_t RNR;                     /*!< Offset: 0x008 (R/W)  MPU Region RNRber Register                     */
+  __IO uint32_t RBAR;                    /*!< Offset: 0x00C (R/W)  MPU Region Base Address Register               */
+  __IO uint32_t RASR;                    /*!< Offset: 0x010 (R/W)  MPU Region Attribute and Size Register         */
+  __IO uint32_t RBAR_A1;                 /*!< Offset: 0x014 (R/W)  MPU Alias 1 Region Base Address Register       */
+  __IO uint32_t RASR_A1;                 /*!< Offset: 0x018 (R/W)  MPU Alias 1 Region Attribute and Size Register */
+  __IO uint32_t RBAR_A2;                 /*!< Offset: 0x01C (R/W)  MPU Alias 2 Region Base Address Register       */
+  __IO uint32_t RASR_A2;                 /*!< Offset: 0x020 (R/W)  MPU Alias 2 Region Attribute and Size Register */
+  __IO uint32_t RBAR_A3;                 /*!< Offset: 0x024 (R/W)  MPU Alias 3 Region Base Address Register       */
+  __IO uint32_t RASR_A3;                 /*!< Offset: 0x028 (R/W)  MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos               16                                             /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk               (0xFFUL << MPU_TYPE_IREGION_Pos)               /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos                8                                             /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk               (0xFFUL << MPU_TYPE_DREGION_Pos)               /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos               0                                             /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk              (1UL /*<< MPU_TYPE_SEPARATE_Pos*/)             /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos             2                                             /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk            (1UL << MPU_CTRL_PRIVDEFENA_Pos)               /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos               1                                             /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk              (1UL << MPU_CTRL_HFNMIENA_Pos)                 /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos                 0                                             /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk                (1UL /*<< MPU_CTRL_ENABLE_Pos*/)               /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos                  0                                             /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk                 (0xFFUL /*<< MPU_RNR_REGION_Pos*/)             /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos                   5                                             /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk                  (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos)             /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos                  4                                             /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk                 (1UL << MPU_RBAR_VALID_Pos)                    /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos                 0                                             /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk                (0xFUL /*<< MPU_RBAR_REGION_Pos*/)             /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos                 16                                             /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk                 (0xFFFFUL << MPU_RASR_ATTRS_Pos)               /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos                    28                                             /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk                    (1UL << MPU_RASR_XN_Pos)                       /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos                    24                                             /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk                    (0x7UL << MPU_RASR_AP_Pos)                     /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos                   19                                             /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk                   (0x7UL << MPU_RASR_TEX_Pos)                    /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos                     18                                             /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk                     (1UL << MPU_RASR_S_Pos)                        /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos                     17                                             /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk                     (1UL << MPU_RASR_C_Pos)                        /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos                     16                                             /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk                     (1UL << MPU_RASR_B_Pos)                        /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos                    8                                             /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk                   (0xFFUL << MPU_RASR_SRD_Pos)                   /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos                   1                                             /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk                  (0x1FUL << MPU_RASR_SIZE_Pos)                  /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos                 0                                             /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk                (1UL /*<< MPU_RASR_ENABLE_Pos*/)               /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup  CMSIS_core_register
+    \defgroup CMSIS_CoreDebug       Core Debug Registers (CoreDebug)
+    \brief      Type definitions for the Core Debug Registers
+  @{
+ */
+
+/** \brief  Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+  __IO uint32_t DHCSR;                   /*!< Offset: 0x000 (R/W)  Debug Halting Control and Status Register    */
+  __O  uint32_t DCRSR;                   /*!< Offset: 0x004 ( /W)  Debug Core Register Selector Register        */
+  __IO uint32_t DCRDR;                   /*!< Offset: 0x008 (R/W)  Debug Core Register Data Register            */
+  __IO uint32_t DEMCR;                   /*!< Offset: 0x00C (R/W)  Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos         16                                             /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk         (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos)       /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos     25                                             /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk     (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos)        /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos    24                                             /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk    (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos)       /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos       19                                             /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk       (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos)          /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos        18                                             /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk        (1UL << CoreDebug_DHCSR_S_SLEEP_Pos)           /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos         17                                             /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk         (1UL << CoreDebug_DHCSR_S_HALT_Pos)            /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos       16                                             /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk       (1UL << CoreDebug_DHCSR_S_REGRDY_Pos)          /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos     5                                             /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk    (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos)       /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos      3                                             /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk     (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos)        /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos          2                                             /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk         (1UL << CoreDebug_DHCSR_C_STEP_Pos)            /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos          1                                             /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk         (1UL << CoreDebug_DHCSR_C_HALT_Pos)            /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos       0                                             /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk      (1UL /*<< CoreDebug_DHCSR_C_DEBUGEN_Pos*/)     /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos         16                                             /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk         (1UL << CoreDebug_DCRSR_REGWnR_Pos)            /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos          0                                             /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk         (0x1FUL /*<< CoreDebug_DCRSR_REGSEL_Pos*/)     /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos         24                                             /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk         (1UL << CoreDebug_DEMCR_TRCENA_Pos)            /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos        19                                             /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk        (1UL << CoreDebug_DEMCR_MON_REQ_Pos)           /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos       18                                             /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk       (1UL << CoreDebug_DEMCR_MON_STEP_Pos)          /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos       17                                             /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk       (1UL << CoreDebug_DEMCR_MON_PEND_Pos)          /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos         16                                             /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk         (1UL << CoreDebug_DEMCR_MON_EN_Pos)            /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos     10                                             /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk     (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos)        /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos       9                                             /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk      (1UL << CoreDebug_DEMCR_VC_INTERR_Pos)         /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos       8                                             /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk      (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos)         /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos      7                                             /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk     (1UL << CoreDebug_DEMCR_VC_STATERR_Pos)        /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos       6                                             /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk      (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos)         /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos      5                                             /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk     (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos)        /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos        4                                             /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk       (1UL << CoreDebug_DEMCR_VC_MMERR_Pos)          /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos    0                                             /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk   (1UL /*<< CoreDebug_DEMCR_VC_CORERESET_Pos*/)  /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup    CMSIS_core_register
+    \defgroup   CMSIS_core_base     Core Definitions
+    \brief      Definitions for base addresses, unions, and structures.
+  @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE            (0xE000E000UL)                            /*!< System Control Space Base Address  */
+#define ITM_BASE            (0xE0000000UL)                            /*!< ITM Base Address                   */
+#define DWT_BASE            (0xE0001000UL)                            /*!< DWT Base Address                   */
+#define TPI_BASE            (0xE0040000UL)                            /*!< TPI Base Address                   */
+#define CoreDebug_BASE      (0xE000EDF0UL)                            /*!< Core Debug Base Address            */
+#define SysTick_BASE        (SCS_BASE +  0x0010UL)                    /*!< SysTick Base Address               */
+#define NVIC_BASE           (SCS_BASE +  0x0100UL)                    /*!< NVIC Base Address                  */
+#define SCB_BASE            (SCS_BASE +  0x0D00UL)                    /*!< System Control Block Base Address  */
+
+#define SCnSCB              ((SCnSCB_Type    *)     SCS_BASE      )   /*!< System control Register not in SCB */
+#define SCB                 ((SCB_Type       *)     SCB_BASE      )   /*!< SCB configuration struct           */
+#define SysTick             ((SysTick_Type   *)     SysTick_BASE  )   /*!< SysTick configuration struct       */
+#define NVIC                ((NVIC_Type      *)     NVIC_BASE     )   /*!< NVIC configuration struct          */
+#define ITM                 ((ITM_Type       *)     ITM_BASE      )   /*!< ITM configuration struct           */
+#define DWT                 ((DWT_Type       *)     DWT_BASE      )   /*!< DWT configuration struct           */
+#define TPI                 ((TPI_Type       *)     TPI_BASE      )   /*!< TPI configuration struct           */
+#define CoreDebug           ((CoreDebug_Type *)     CoreDebug_BASE)   /*!< Core Debug configuration struct    */
+
+#if (__MPU_PRESENT == 1)
+  #define MPU_BASE          (SCS_BASE +  0x0D90UL)                    /*!< Memory Protection Unit             */
+  #define MPU               ((MPU_Type       *)     MPU_BASE      )   /*!< Memory Protection Unit             */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ *                Hardware Abstraction Layer
+  Core Function Interface contains:
+  - Core NVIC Functions
+  - Core SysTick Functions
+  - Core Debug Functions
+  - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ##########################   NVIC functions  #################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+    \brief      Functions that manage interrupts and exceptions via the NVIC.
+    @{
+ */
+
+/** \brief  Set Priority Grouping
+
+  The function sets the priority grouping field using the required unlock sequence.
+  The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+  Only values from 0..7 are used.
+  In case of a conflict between priority grouping and available
+  priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+    \param [in]      PriorityGroup  Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+  uint32_t reg_value;
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);             /* only values 0..7 are used          */
+
+  reg_value  =  SCB->AIRCR;                                                   /* read old register configuration    */
+  reg_value &= ~((uint32_t)(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk));             /* clear bits to change               */
+  reg_value  =  (reg_value                                   |
+                ((uint32_t)0x5FAUL << SCB_AIRCR_VECTKEY_Pos) |
+                (PriorityGroupTmp << 8)                       );              /* Insert write key and priorty group */
+  SCB->AIRCR =  reg_value;
+}
+
+
+/** \brief  Get Priority Grouping
+
+  The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+    \return                Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+  return ((uint32_t)((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos));
+}
+
+
+/** \brief  Enable External Interrupt
+
+    The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Disable External Interrupt
+
+    The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICER[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Get Pending Interrupt
+
+    The function reads the pending register in the NVIC and returns the pending bit
+    for the specified interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not pending.
+    \return             1  Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief  Set Pending Interrupt
+
+    The function sets the pending bit of an external interrupt.
+
+    \param [in]      IRQn  Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ISPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Clear Pending Interrupt
+
+    The function clears the pending bit of an external interrupt.
+
+    \param [in]      IRQn  External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  NVIC->ICPR[(((uint32_t)(int32_t)IRQn) >> 5UL)] = (uint32_t)(1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL));
+}
+
+
+/** \brief  Get Active Interrupt
+
+    The function reads the active register in NVIC and returns the active bit.
+
+    \param [in]      IRQn  Interrupt number.
+
+    \return             0  Interrupt status is not active.
+    \return             1  Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+  return((uint32_t)(((NVIC->IABR[(((uint32_t)(int32_t)IRQn) >> 5UL)] & (1UL << (((uint32_t)(int32_t)IRQn) & 0x1FUL))) != 0UL) ? 1UL : 0UL));
+}
+
+
+/** \brief  Set Interrupt Priority
+
+    The function sets the priority of an interrupt.
+
+    \note The priority cannot be set for every core interrupt.
+
+    \param [in]      IRQn  Interrupt number.
+    \param [in]  priority  Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if((int32_t)IRQn < 0) {
+    SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+  else {
+    NVIC->IP[((uint32_t)(int32_t)IRQn)]               = (uint8_t)((priority << (8 - __NVIC_PRIO_BITS)) & (uint32_t)0xFFUL);
+  }
+}
+
+
+/** \brief  Get Interrupt Priority
+
+    The function reads the priority of an interrupt. The interrupt
+    number can be positive to specify an external (device specific)
+    interrupt, or negative to specify an internal (core) interrupt.
+
+
+    \param [in]   IRQn  Interrupt number.
+    \return             Interrupt Priority. Value is aligned automatically to the implemented
+                        priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+  if((int32_t)IRQn < 0) {
+    return(((uint32_t)SCB->SHP[(((uint32_t)(int32_t)IRQn) & 0xFUL)-4UL] >> (8 - __NVIC_PRIO_BITS)));
+  }
+  else {
+    return(((uint32_t)NVIC->IP[((uint32_t)(int32_t)IRQn)]               >> (8 - __NVIC_PRIO_BITS)));
+  }
+}
+
+
+/** \brief  Encode Priority
+
+    The function encodes the priority for an interrupt with the given priority group,
+    preemptive priority value, and subpriority value.
+    In case of a conflict between priority grouping and available
+    priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+    \param [in]     PriorityGroup  Used priority group.
+    \param [in]   PreemptPriority  Preemptive priority value (starting from 0).
+    \param [in]       SubPriority  Subpriority value (starting from 0).
+    \return                        Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  return (
+           ((PreemptPriority & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL)) << SubPriorityBits) |
+           ((SubPriority     & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL)))
+         );
+}
+
+
+/** \brief  Decode Priority
+
+    The function decodes an interrupt priority value with a given priority group to
+    preemptive priority value and subpriority value.
+    In case of a conflict between priority grouping and available
+    priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+
+    \param [in]         Priority   Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+    \param [in]     PriorityGroup  Used priority group.
+    \param [out] pPreemptPriority  Preemptive priority value (starting from 0).
+    \param [out]     pSubPriority  Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+  uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07UL);   /* only values 0..7 are used          */
+  uint32_t PreemptPriorityBits;
+  uint32_t SubPriorityBits;
+
+  PreemptPriorityBits = ((7UL - PriorityGroupTmp) > (uint32_t)(__NVIC_PRIO_BITS)) ? (uint32_t)(__NVIC_PRIO_BITS) : (uint32_t)(7UL - PriorityGroupTmp);
+  SubPriorityBits     = ((PriorityGroupTmp + (uint32_t)(__NVIC_PRIO_BITS)) < (uint32_t)7UL) ? (uint32_t)0UL : (uint32_t)((PriorityGroupTmp - 7UL) + (uint32_t)(__NVIC_PRIO_BITS));
+
+  *pPreemptPriority = (Priority >> SubPriorityBits) & (uint32_t)((1UL << (PreemptPriorityBits)) - 1UL);
+  *pSubPriority     = (Priority                   ) & (uint32_t)((1UL << (SubPriorityBits    )) - 1UL);
+}
+
+
+/** \brief  System Reset
+
+    The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+  __DSB();                                                          /* Ensure all outstanding memory accesses included
+                                                                       buffered write are completed before reset */
+  SCB->AIRCR  = (uint32_t)((0x5FAUL << SCB_AIRCR_VECTKEY_Pos)    |
+                           (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+                            SCB_AIRCR_SYSRESETREQ_Msk    );         /* Keep priority group unchanged */
+  __DSB();                                                          /* Ensure completion of memory access */
+  while(1) { __NOP(); }                                             /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ##################################    SysTick function  ############################################ */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+    \brief      Functions that configure the System.
+  @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief  System Tick Configuration
+
+    The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+    Counter is in free running mode to generate periodic interrupts.
+
+    \param [in]  ticks  Number of ticks between two interrupts.
+
+    \return          0  Function succeeded.
+    \return          1  Function failed.
+
+    \note     When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+    function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+    must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+  if ((ticks - 1UL) > SysTick_LOAD_RELOAD_Msk) { return (1UL); }    /* Reload value impossible */
+
+  SysTick->LOAD  = (uint32_t)(ticks - 1UL);                         /* set reload register */
+  NVIC_SetPriority (SysTick_IRQn, (1UL << __NVIC_PRIO_BITS) - 1UL); /* set Priority for Systick Interrupt */
+  SysTick->VAL   = 0UL;                                             /* Load the SysTick Counter Value */
+  SysTick->CTRL  = SysTick_CTRL_CLKSOURCE_Msk |
+                   SysTick_CTRL_TICKINT_Msk   |
+                   SysTick_CTRL_ENABLE_Msk;                         /* Enable SysTick IRQ and SysTick Timer */
+  return (0UL);                                                     /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup  CMSIS_Core_FunctionInterface
+    \defgroup CMSIS_core_DebugFunctions ITM Functions
+    \brief   Functions that access the ITM debug interface.
+  @{
+ */
+
+extern volatile int32_t ITM_RxBuffer;                    /*!< External variable to receive characters.                         */
+#define                 ITM_RXBUFFER_EMPTY    0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief  ITM Send Character
+
+    The function transmits a character via the ITM channel 0, and
+    \li Just returns when no debugger is connected that has booked the output.
+    \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+    \param [in]     ch  Character to transmit.
+
+    \returns            Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+  if (((ITM->TCR & ITM_TCR_ITMENA_Msk) != 0UL) &&      /* ITM enabled */
+      ((ITM->TER & 1UL               ) != 0UL)   )     /* ITM Port #0 enabled */
+  {
+    while (ITM->PORT[0].u32 == 0UL) { __NOP(); }
+    ITM->PORT[0].u8 = (uint8_t)ch;
+  }
+  return (ch);
+}
+
+
+/** \brief  ITM Receive Character
+
+    The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+    \return             Received character.
+    \return         -1  No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+  int32_t ch = -1;                           /* no character available */
+
+  if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+    ch = ITM_RxBuffer;
+    ITM_RxBuffer = ITM_RXBUFFER_EMPTY;       /* ready for next character */
+  }
+
+  return (ch);
+}
+
+
+/** \brief  ITM Check Character
+
+    The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+    \return          0  No character available.
+    \return          1  Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+  if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+    return (0);                                 /* no character available */
+  } else {
+    return (1);                                 /*    character available */
+  }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_SC300_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/PeripheralPins.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_PERIPHERALPINS_H
+#define MBED_PERIPHERALPINS_H
+
+#include "pinmap.h"
+#include "PeripheralNames.h"
+
+//*** ADC ***
+
+extern const PinMap PinMap_ADC[];
+
+//*** DAC ***
+
+extern const PinMap PinMap_DAC[];
+
+//*** I2C ***
+
+extern const PinMap PinMap_I2C_SDA[];
+extern const PinMap PinMap_I2C_SCL[];
+
+//*** PWM ***
+
+extern const PinMap PinMap_PWM[];
+
+//*** SERIAL ***
+
+extern const PinMap PinMap_UART_TX[];
+extern const PinMap PinMap_UART_RX[];
+
+//*** SPI ***
+
+extern const PinMap PinMap_SPI_MOSI[];
+extern const PinMap PinMap_SPI_MISO[];
+extern const PinMap PinMap_SPI_SCLK[];
+extern const PinMap PinMap_SPI_SSEL[];
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/PeripheralNames.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,99 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ADC_1 = (int)ADC1_BASE,
+    ADC_2 = (int)ADC2_BASE,
+    ADC_3 = (int)ADC3_BASE
+} ADCName;
+
+typedef enum {
+    DAC_1 = DAC_BASE
+} DACName;
+
+typedef enum {
+    UART_1 = (int)USART1_BASE,
+    UART_2 = (int)USART2_BASE,
+    UART_3 = (int)USART3_BASE,
+    UART_4 = (int)UART4_BASE,
+    UART_5 = (int)UART5_BASE,
+    UART_6 = (int)USART6_BASE,
+    UART_7 = (int)UART7_BASE,
+    UART_8 = (int)UART8_BASE
+} UARTName;
+
+#define STDIO_UART_TX  PA_9
+#define STDIO_UART_RX  PB_7
+#define STDIO_UART     UART_1
+
+typedef enum {
+    SPI_1 = (int)SPI1_BASE,
+    SPI_2 = (int)SPI2_BASE,
+    SPI_3 = (int)SPI3_BASE,
+    SPI_4 = (int)SPI4_BASE,
+    SPI_5 = (int)SPI5_BASE,
+    SPI_6 = (int)SPI6_BASE
+} SPIName;
+
+typedef enum {
+    I2C_1 = (int)I2C1_BASE,
+    I2C_2 = (int)I2C2_BASE,
+    I2C_3 = (int)I2C3_BASE,
+    I2C_4 = (int)I2C4_BASE
+} I2CName;
+
+typedef enum {
+    PWM_1  = (int)TIM1_BASE,
+    PWM_2  = (int)TIM2_BASE,
+    PWM_3  = (int)TIM3_BASE,
+    PWM_4  = (int)TIM4_BASE,
+    PWM_5  = (int)TIM5_BASE,
+    PWM_8  = (int)TIM8_BASE,
+    PWM_9  = (int)TIM9_BASE,
+    PWM_10 = (int)TIM10_BASE,
+    PWM_11 = (int)TIM11_BASE,
+    PWM_12 = (int)TIM12_BASE,
+    PWM_13 = (int)TIM13_BASE,
+    PWM_14 = (int)TIM14_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/PeripheralPins.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,151 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =============================================================================
+// Notes:
+// * Commented lines are alternative possibilities which are not used per default.
+//   If you change them, you will have also to modify the corresponding xxx_api.c file
+//   for pwmout, analogin, analogout, ...
+// * Only the pins that are placed on the Arduino connector are described.
+// =============================================================================
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+    {PA_0,  ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0 - ARDUINO A0
+    {PF_6,  ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 - ARDUINO A5
+    {PF_7,  ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 - ARDUINO A4
+    {PF_8,  ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 - ARDUINO A3
+    {PF_9,  ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 - ARDUINO A2
+    {PF_10, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 - ARDUINO A1
+    {NC,    NC,    0}
+};
+
+//*** DAC ***
+
+const PinMap PinMap_DAC[] = {
+    {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 1, 0)}, // DAC_OUT1
+    {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 2, 0)}, // DAC_OUT2
+    {NC,   NC,    0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+    {PB_9,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D14
+    {NC,    NC,    0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+    {PB_8,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D15
+    {NC,    NC,    0}
+};
+
+//*** PWM ***
+
+const PinMap PinMap_PWM[] = {
+    {PA_0,  PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2,  1, 0)}, // TIM2_CH1 - ARDUINO A0
+//  {PA_0,  PWM_5,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5,  1, 0)}, // TIM5_CH1 - ARDUINO A0 (used by us_ticker)
+    {PA_8,  PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  1, 0)}, // TIM1_CH1 - ARDUINO D5
+    {PA_15, PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2,  1, 0)}, // TIM2_CH1 - ARDUINO D9
+    {PB_4,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  1, 0)}, // TIM3_CH1 - ARDUINO D3
+    {PB_8,  PWM_4,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4,  3, 0)}, // TIM4_CH3 - ARDUINO D15
+//  {PB_8,  PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM1,  1, 0)}, // TIM10_CH1 - ARDUINO D15
+    {PB_9,  PWM_4,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4,  4, 0)}, // TIM4_CH4 - ARDUINO D14
+//  {PB_9,  PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - ARDUINO D14
+//  {PB_14, PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  2, 1)}, // TIM1_CH2N - ARDUINO D12
+//  {PB_14, PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  2, 1)}, // TIM8_CH2N - ARDUINO D12
+    {PB_14, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 - ARDUINO D12
+//  {PB_15, PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  3, 1)}, // TIM1_CH3N - ARDUINO D11
+//  {PB_15, PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  3, 1)}, // TIM8_CH3N - ARDUINO D11
+    {PB_15, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2 - ARDUINO D11
+//  {PC_6,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  1, 0)}, // TIM3_CH1 - ARDUINO D1
+    {PC_6,  PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  1, 0)}, // TIM8_CH1 - ARDUINO D1
+//  {PC_7,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  2, 0)}, // TIM3_CH2 - ARDUINO D0
+    {PC_7,  PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  2, 0)}, // TIM8_CH2 - ARDUINO D0
+    {PF_6,  PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 - ARDUINO A5
+    {PF_7,  PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - ARDUINO A4
+    {PF_8,  PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 - ARDUINO A3
+    {PF_9,  PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 - ARDUINO A2
+    {PH_6,  PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 - ARDUINO D6
+//  {PI_0,  PWM_5,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5,  4, 0)}, // TIM5_CH4 - ARDUINO D10 (used by us_ticker)
+    {PI_2,  PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  4, 0)}, // TIM8_CH4 - ARDUINO D8
+    {NC,    NC,    0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+    {PA_0,  UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // ARDUINO A0
+    {PA_9,  UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Virtual Com Port
+    {PC_6,  UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D1
+    {PF_7,  UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // ARDUINO A4
+    {NC,    NC,     0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    {PB_7,  UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Virtual Com Port
+    {PC_7,  UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D0
+    {PF_6,  UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // ARDUINO A5
+    {NC,    NC,     0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+    {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D11
+    {PF_9,  SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A2
+    {PI_3,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D7
+    {NC,    NC,    0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+    {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D12
+    {PF_8,  SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A3
+    {PI_2,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D8
+    {NC,    NC,    0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+    {PF_7,  SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A4
+    {PH_6,  SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO D6
+    {PI_1,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D13
+    {NC,    NC,    0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+    {PB_4,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI2)}, // ARDUINO D3
+    {PB_9,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D14
+    {PF_6,  SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A5
+    {PI_0,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D10
+    {NC,    NC,    0}
+};

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/PinNames.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,317 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STM_PIN_DATA(MODE, PUPD, AFNUM)  ((int)(((MODE  & 0x0F) << 0) |\
+                                                ((PUPD  & 0x07) << 4) |\
+                                                ((AFNUM & 0x0F) << 7)))
+
+#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED)  ((int)(((MODE     & 0x0F) <<  0) |\
+                                                                       ((PUPD     & 0x07) <<  4) |\
+                                                                       ((AFNUM    & 0x0F) <<  7) |\
+                                                                       ((CHANNEL  & 0x0F) << 11) |\
+                                                                       ((INVERTED & 0x01) << 15)))
+
+#define STM_PIN_MODE(X)     (((X) >>  0) & 0x0F)
+#define STM_PIN_PUPD(X)     (((X) >>  4) & 0x07)
+#define STM_PIN_AFNUM(X)    (((X) >>  7) & 0x0F)
+#define STM_PIN_CHANNEL(X)  (((X) >> 11) & 0x0F)
+#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
+
+#define STM_MODE_INPUT              (0)
+#define STM_MODE_OUTPUT_PP          (1)
+#define STM_MODE_OUTPUT_OD          (2)
+#define STM_MODE_AF_PP              (3)
+#define STM_MODE_AF_OD              (4)
+#define STM_MODE_ANALOG             (5)
+#define STM_MODE_IT_RISING          (6)
+#define STM_MODE_IT_FALLING         (7)
+#define STM_MODE_IT_RISING_FALLING  (8)
+#define STM_MODE_EVT_RISING         (9)
+#define STM_MODE_EVT_FALLING        (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET       (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H, 8=I, 9=J, A=K)
+// Low nibble  = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X)  ((uint32_t)(X) & 0xF)
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+    PA_0  = 0x00,
+    PA_1  = 0x01,
+    PA_2  = 0x02,
+    PA_3  = 0x03,
+    PA_4  = 0x04,
+    PA_5  = 0x05,
+    PA_6  = 0x06,
+    PA_7  = 0x07,
+    PA_8  = 0x08,
+    PA_9  = 0x09,
+    PA_10 = 0x0A,
+    PA_11 = 0x0B,
+    PA_12 = 0x0C,
+    PA_13 = 0x0D,
+    PA_14 = 0x0E,
+    PA_15 = 0x0F,
+
+    PB_0  = 0x10,
+    PB_1  = 0x11,
+    PB_2  = 0x12,
+    PB_3  = 0x13,
+    PB_4  = 0x14,
+    PB_5  = 0x15,
+    PB_6  = 0x16,
+    PB_7  = 0x17,
+    PB_8  = 0x18,
+    PB_9  = 0x19,
+    PB_10 = 0x1A,
+    PB_11 = 0x1B,
+    PB_12 = 0x1C,
+    PB_13 = 0x1D,
+    PB_14 = 0x1E,
+    PB_15 = 0x1F,
+
+    PC_0  = 0x20,
+    PC_1  = 0x21,
+    PC_2  = 0x22,
+    PC_3  = 0x23,
+    PC_4  = 0x24,
+    PC_5  = 0x25,
+    PC_6  = 0x26,
+    PC_7  = 0x27,
+    PC_8  = 0x28,
+    PC_9  = 0x29,
+    PC_10 = 0x2A,
+    PC_11 = 0x2B,
+    PC_12 = 0x2C,
+    PC_13 = 0x2D,
+    PC_14 = 0x2E,
+    PC_15 = 0x2F,
+
+    PD_0  = 0x30,
+    PD_1  = 0x31,
+    PD_2  = 0x32,
+    PD_3  = 0x33,
+    PD_4  = 0x34,
+    PD_5  = 0x35,
+    PD_6  = 0x36,
+    PD_7  = 0x37,
+    PD_8  = 0x38,
+    PD_9  = 0x39,
+    PD_10 = 0x3A,
+    PD_11 = 0x3B,
+    PD_12 = 0x3C,
+    PD_13 = 0x3D,
+    PD_14 = 0x3E,
+    PD_15 = 0x3F,
+
+    PE_0  = 0x40,
+    PE_1  = 0x41,
+    PE_2  = 0x42,
+    PE_3  = 0x43,
+    PE_4  = 0x44,
+    PE_5  = 0x45,
+    PE_6  = 0x46,
+    PE_7  = 0x47,
+    PE_8  = 0x48,
+    PE_9  = 0x49,
+    PE_10 = 0x4A,
+    PE_11 = 0x4B,
+    PE_12 = 0x4C,
+    PE_13 = 0x4D,
+    PE_14 = 0x4E,
+    PE_15 = 0x4F,
+
+    PF_0  = 0x50,
+    PF_1  = 0x51,
+    PF_2  = 0x52,
+    PF_3  = 0x53,
+    PF_4  = 0x54,
+    PF_5  = 0x55,
+    PF_6  = 0x56,
+    PF_7  = 0x57,
+    PF_8  = 0x58,
+    PF_9  = 0x59,
+    PF_10 = 0x5A,
+    PF_11 = 0x5B,
+    PF_12 = 0x5C,
+    PF_13 = 0x5D,
+    PF_14 = 0x5E,
+    PF_15 = 0x5F,
+
+    PG_0  = 0x60,
+    PG_1  = 0x61,
+    PG_2  = 0x62,
+    PG_3  = 0x63,
+    PG_4  = 0x64,
+    PG_5  = 0x65,
+    PG_6  = 0x66,
+    PG_7  = 0x67,
+    PG_8  = 0x68,
+    PG_9  = 0x69,
+    PG_10 = 0x6A,
+    PG_11 = 0x6B,
+    PG_12 = 0x6C,
+    PG_13 = 0x6D,
+    PG_14 = 0x6E,
+    PG_15 = 0x6F,
+
+    PH_0  = 0x70,
+    PH_1  = 0x71,
+    PH_2  = 0x72,
+    PH_3  = 0x73,
+    PH_4  = 0x74,
+    PH_5  = 0x75,
+    PH_6  = 0x76,
+    PH_7  = 0x77,
+    PH_8  = 0x78,
+    PH_9  = 0x79,
+    PH_10 = 0x7A,
+    PH_11 = 0x7B,
+    PH_12 = 0x7C,
+    PH_13 = 0x7D,
+    PH_14 = 0x7E,
+    PH_15 = 0x7F,
+
+    PI_0  = 0x80,
+    PI_1  = 0x81,
+    PI_2  = 0x82,
+    PI_3  = 0x83,
+    PI_4  = 0x84,
+    PI_5  = 0x85,
+    PI_6  = 0x86,
+    PI_7  = 0x87,
+    PI_8  = 0x88,
+    PI_9  = 0x89,
+    PI_10 = 0x8A,
+    PI_11 = 0x8B,
+    PI_12 = 0x8C,
+    PI_13 = 0x8D,
+    PI_14 = 0x8E,
+    PI_15 = 0x8F,
+
+    PJ_0  = 0x90,
+    PJ_1  = 0x91,
+    PJ_2  = 0x92,
+    PJ_3  = 0x93,
+    PJ_4  = 0x94,
+    PJ_5  = 0x95,
+    PJ_6  = 0x96,
+    PJ_7  = 0x97,
+    PJ_8  = 0x98,
+    PJ_9  = 0x99,
+    PJ_10 = 0x9A,
+    PJ_11 = 0x9B,
+    PJ_12 = 0x9C,
+    PJ_13 = 0x9D,
+    PJ_14 = 0x9E,
+    PJ_15 = 0x9F,
+
+    PK_0  = 0xA0,
+    PK_1  = 0xA1,
+    PK_2  = 0xA2,
+    PK_3  = 0xA3,
+    PK_4  = 0xA4,
+    PK_5  = 0xA5,
+    PK_6  = 0xA6,
+    PK_7  = 0xA7,
+
+    // Arduino connector namings
+    A0          = PA_0,
+    A1          = PF_10,
+    A2          = PF_9,
+    A3          = PF_8,
+    A4          = PF_7,
+    A5          = PF_6,
+    D0          = PC_7,
+    D1          = PC_6,
+    D2          = PG_6,
+    D3          = PB_4,
+    D4          = PG_7,
+    D5          = PI_0,
+    D6          = PH_6,
+    D7          = PI_3,
+    D8          = PI_2,
+    D9          = PA_15,
+    D10         = PA_8,
+    D11         = PB_15,
+    D12         = PB_14,
+    D13         = PI_1,
+    D14         = PB_9,
+    D15         = PB_8,
+
+    // Generic signals namings
+    LED1        = PI_1, // LD1 = GREEN
+    LED2        = PI_1,
+    LED3        = PI_1,
+    LED4        = PI_1,
+    USER_BUTTON = PI_11,
+    SERIAL_TX   = PA_9, // Virtual Com Port
+    SERIAL_RX   = PB_7, // Virtual Com Port
+    USBTX       = PA_9, // Virtual Com Port
+    USBRX       = PB_7, // Virtual Com Port
+    I2C_SCL     = D15,
+    I2C_SDA     = D14,
+    SPI_MOSI    = D11,
+    SPI_MISO    = D12,
+    SPI_SCK     = D13,
+    SPI_CS      = D10,
+    PWM_OUT     = D9,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+    PullNone  = 0,
+    PullUp    = 1,
+    PullDown  = 2,
+    OpenDrain = 3,
+    PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/PortNames.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,54 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PortA = 0,
+    PortB = 1,
+    PortC = 2,
+    PortD = 3,
+    PortE = 4,
+    PortF = 5,
+    PortG = 6,
+    PortH = 7,
+    PortI = 8,
+    PortJ = 9,
+    PortK = 10
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/device.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,71 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_DEVICE_H
+#define MBED_DEVICE_H
+
+#define DEVICE_PORTIN           1
+#define DEVICE_PORTOUT          1
+#define DEVICE_PORTINOUT        1
+
+#define DEVICE_INTERRUPTIN      1
+
+#define DEVICE_ANALOGIN         1
+#define DEVICE_ANALOGOUT        1
+
+#define DEVICE_SERIAL           1
+
+#define DEVICE_I2C              1
+#define DEVICE_I2CSLAVE         1
+
+#define DEVICE_SPI              1
+#define DEVICE_SPISLAVE         1
+
+#define DEVICE_RTC              1
+#define DEVICE_RTC_LSI          0
+
+#define DEVICE_PWMOUT           1
+
+#define DEVICE_SLEEP            1
+
+//=======================================
+
+#define DEVICE_SEMIHOST         0
+#define DEVICE_LOCALFILESYSTEM  0
+#define DEVICE_ID_LENGTH       24
+
+#define DEVICE_DEBUG_AWARENESS  0
+
+#define DEVICE_STDIO_MESSAGES   1
+
+#define DEVICE_ERROR_RED        0
+
+#include "objects.h"
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/objects.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,114 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+    IRQn_Type irq_n;
+    uint32_t irq_index;
+    uint32_t event;
+    PinName pin;
+};
+
+struct port_s {
+    PortName port;
+    uint32_t mask;
+    PinDirection direction;
+    __IO uint32_t *reg_in;
+    __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+    ADCName adc;
+    PinName pin;
+    uint8_t channel;
+};
+
+struct dac_s {
+    DACName dac;
+    PinName pin;
+    uint32_t channel;
+};
+
+struct serial_s {
+    UARTName uart;
+    int index; // Used by irq
+    uint32_t baudrate;
+    uint32_t databits;
+    uint32_t stopbits;
+    uint32_t parity;
+    PinName pin_tx;
+    PinName pin_rx;
+};
+
+struct spi_s {
+    SPIName spi;
+    uint32_t bits;
+    uint32_t cpol;
+    uint32_t cpha;
+    uint32_t mode;
+    uint32_t nss;
+    uint32_t br_presc;
+    PinName pin_miso;
+    PinName pin_mosi;
+    PinName pin_sclk;
+    PinName pin_ssel;
+};
+
+struct i2c_s {
+    I2CName  i2c;
+    uint32_t slave;
+};
+
+struct pwmout_s {
+    PWMName pwm;
+    PinName pin;
+    uint32_t period;
+    uint32_t pulse;
+    uint8_t channel;
+    uint8_t inverted;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PeripheralNames.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,99 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ADC_1 = (int)ADC1_BASE,
+    ADC_2 = (int)ADC2_BASE,
+    ADC_3 = (int)ADC3_BASE
+} ADCName;
+
+typedef enum {
+    DAC_1 = DAC_BASE
+} DACName;
+
+typedef enum {
+    UART_1 = (int)USART1_BASE,
+    UART_2 = (int)USART2_BASE,
+    UART_3 = (int)USART3_BASE,
+    UART_4 = (int)UART4_BASE,
+    UART_5 = (int)UART5_BASE,
+    UART_6 = (int)USART6_BASE,
+    UART_7 = (int)UART7_BASE,
+    UART_8 = (int)UART8_BASE
+} UARTName;
+
+#define STDIO_UART_TX  PD_8
+#define STDIO_UART_RX  PD_9
+#define STDIO_UART     UART_3
+
+typedef enum {
+    SPI_1 = (int)SPI1_BASE,
+    SPI_2 = (int)SPI2_BASE,
+    SPI_3 = (int)SPI3_BASE,
+    SPI_4 = (int)SPI4_BASE,
+    SPI_5 = (int)SPI5_BASE,
+    SPI_6 = (int)SPI6_BASE
+} SPIName;
+
+typedef enum {
+    I2C_1 = (int)I2C1_BASE,
+    I2C_2 = (int)I2C2_BASE,
+    I2C_3 = (int)I2C3_BASE,
+    I2C_4 = (int)I2C4_BASE
+} I2CName;
+
+typedef enum {
+    PWM_1  = (int)TIM1_BASE,
+    PWM_2  = (int)TIM2_BASE,
+    PWM_3  = (int)TIM3_BASE,
+    PWM_4  = (int)TIM4_BASE,
+    PWM_5  = (int)TIM5_BASE,
+    PWM_8  = (int)TIM8_BASE,
+    PWM_9  = (int)TIM9_BASE,
+    PWM_10 = (int)TIM10_BASE,
+    PWM_11 = (int)TIM11_BASE,
+    PWM_12 = (int)TIM12_BASE,
+    PWM_13 = (int)TIM13_BASE,
+    PWM_14 = (int)TIM14_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PeripheralPins.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,328 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#include "PeripheralPins.h"
+
+// =============================================================================
+// Notes:
+// * Commented lines are alternative possibilities which are not used per default.
+//   If you change them, you will have also to modify the corresponding xxx_api.c file
+//   for pwmout, analogin, analogout, ...
+// * Only the pins that are placed on the Arduino connector are described.
+// =============================================================================
+
+//*** ADC ***
+
+const PinMap PinMap_ADC[] = {
+    {PA_0,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0  - ARDUINO A0
+ // {PA_1,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1  (used by ethernet)
+ // {PA_2,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2  (used by ethernet)
+    {PA_3,  ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN2
+    {PA_4,  ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
+    {PA_5,  ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5  - ARDUINO D13
+    {PA_6,  ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6  - ARDUINO D12
+    {PA_7,  ADC_2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7 (JP6) - ARDUINO D11
+ // {PB_0,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 (used by LED1)
+    {PB_1,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
+    {PC_0,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,10, 0)}, // ADC1_IN10 - ARDUINO A1
+ // {PC_1,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,11, 0)}, // ADC1_IN11 (used by ethernet)
+    {PC_2,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,12, 0)}, // ADC1_IN12
+    {PC_3,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,13, 0)}, // ADC1_IN13 - ARDUINO A2
+ // {PC_4,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,14, 0)}, // ADC1_IN14 (used by ethernet)
+ // {PC_5,  ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,15, 0)}, // ADC1_IN15 (used by ethernet)
+
+    {PF_3,  ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9  - ARDUINO A3
+    {PF_4,  ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,14, 0)}, // ADC3_IN14
+    {PF_5,  ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0,15, 0)}, // ADC3_IN15 - ARDUINO A4
+    {PF_6,  ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4
+    {PF_7,  ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5
+    {PF_8,  ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6
+    {PF_9,  ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7
+    {PF_10, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 - ARDUINO A5
+
+    {NC,    NC,    0}
+};
+
+//*** DAC ***
+
+const PinMap PinMap_DAC[] = {
+    {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 1, 0)}, // DAC_OUT1
+    {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 2, 0)}, // DAC_OUT2
+    {NC,   NC,    0}
+};
+
+//*** I2C ***
+
+const PinMap PinMap_I2C_SDA[] = {
+    // {PB_7,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // (used by LED2)
+       {PB_9,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+       {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+       {PC_9,  I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+       {PD_13, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+       {PF_0,  I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+       {PF_15, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+       {NC,    NC,    0}
+};
+
+const PinMap PinMap_I2C_SCL[] = {
+    {PA_8,  I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+    {PB_6,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+    {PB_8,  I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+    {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+    {PD_12, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+    {PF_1,  I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+    {PF_14, I2C_4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+    {NC,    NC,    0}
+};
+
+//*** PWM ***
+
+const PinMap PinMap_PWM[] = {
+    {PA_0,  PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2,  1, 0)}, // TIM2_CH1
+ // {PA_0,  PWM_5,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5,  1, 0)}, // TIM5_CH1 (used by us_ticker)
+ // {PA_1,  PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2,  2, 0)}, // TIM2_CH2 (used by ethernet)
+ // {PA_1,  PWM_5,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5,  2, 0)}, // TIM5_CH2 (used by ethernet & us_ticker)
+ // {PA_2,  PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2,  3, 0)}, // TIM2_CH3 (used by ethernet)
+ // {PA_2,  PWM_5,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5,  3, 0)}, // TIM5_CH3 (used by ethernet & us_ticker)
+ // {PA_2,  PWM_9,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9,  1, 0)}, // TIM9_CH1 (used by ethernet)
+    {PA_3,  PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2,  4, 0)}, // TIM2_CH4
+ // {PA_3,  PWM_5,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5,  4, 0)}, // TIM5_CH4 (used by us_ticker)
+ // {PA_3,  PWM_9,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9,  2, 0)}, // TIM9_CH2
+    {PA_5,  PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2,  1, 0)}, // TIM2_CH1
+ // {PA_5,  PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  1, 1)}, // TIM8_CH1N
+    {PA_6,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  1, 0)}, // TIM3_CH1
+ // {PA_6,  PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
+ // {PA_7,  PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  1, 1)}, // TIM1_CH1N (used by ethernet)
+ // {PA_7,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  2, 0)}, // TIM3_CH2  (used by ethernet)
+ // {PA_7,  PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  1, 1)}, // TIM8_CH1N (used by ethernet)
+ // {PA_7,  PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 (used by ethernet)
+    {PA_8,  PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  1, 0)}, // TIM1_CH1
+ // {PA_9,  PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  2, 0)}, // TIM1_CH2 (used by USB)
+ // {PA_10, PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  3, 0)}, // TIM1_CH3 (used by USB)
+ // {PA_11, PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  4, 0)}, // TIM1_CH4 (used by USB)
+    {PA_15, PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2,  1, 0)}, // TIM2_CH1
+
+ // {PB_0,  PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  2, 1)}, // TIM1_CH2N (used by LED1)
+ // {PB_0,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  3, 0)}, // TIM3_CH3
+ // {PB_0,  PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  2, 1)}, // TIM8_CH2N
+    {PB_1,  PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  3, 1)}, // TIM1_CH3N
+ // {PB_1,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  4, 0)}, // TIM3_CH4
+ // {PB_1,  PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  3, 1)}, // TIM8_CH3N
+    {PB_3,  PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2,  2, 0)}, // TIM2_CH2
+    {PB_4,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  1, 0)}, // TIM3_CH1
+    {PB_5,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  2, 0)}, // TIM3_CH2
+    {PB_6,  PWM_4,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4,  1, 0)}, // TIM4_CH1
+ // {PB_7,  PWM_4,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4,  2, 0)}, // TIM4_CH2 (used by LED2)
+    {PB_8,  PWM_4,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4,  3, 0)}, // TIM4_CH3
+//  {PB_8,  PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
+    {PB_9,  PWM_4,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4,  4, 0)}, // TIM4_CH4
+//  {PB_9,  PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
+    {PB_10, PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2,  3, 0)}, // TIM2_CH3
+    {PB_11, PWM_2,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2,  4, 0)}, // TIM2_CH4
+    {PB_13, PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  1, 1)}, // TIM1_CH1N (remove JP7 to use it)
+ // {PB_14, PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  2, 1)}, // TIM1_CH2N (used by LED3)
+ // {PB_14, PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  2, 1)}, // TIM8_CH2N (used by LED3)
+ // {PB_14, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 (used by LED3)
+ // {PB_15, PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  3, 1)}, // TIM1_CH3N
+ // {PB_15, PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  3, 1)}, // TIM8_CH3N
+    {PB_15, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
+
+ // {PC_6,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  1, 0)}, // TIM3_CH1
+    {PC_6,  PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  1, 0)}, // TIM8_CH1
+ // {PC_7,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  2, 0)}, // TIM3_CH2
+    {PC_7,  PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  2, 0)}, // TIM8_CH2
+ // {PC_8,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  3, 0)}, // TIM3_CH3
+    {PC_8,  PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  3, 0)}, // TIM8_CH3
+ // {PC_9,  PWM_3,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3,  4, 0)}, // TIM3_CH4
+    {PC_9,  PWM_8,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8,  4, 0)}, // TIM8_CH4
+
+    {PD_12, PWM_4,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4,  1, 0)}, // TIM4_CH1
+    {PD_13, PWM_4,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4,  2, 0)}, // TIM4_CH2
+    {PD_14, PWM_4,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4,  3, 0)}, // TIM4_CH3
+    {PD_15, PWM_4,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4,  4, 0)}, // TIM4_CH4
+
+    {PE_5,  PWM_9,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9,  1, 0)}, // TIM9_CH1
+    {PE_6,  PWM_9,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9,  2, 0)}, // TIM9_CH2
+    {PE_8,  PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  1, 1)}, // TIM1_CH1N
+    {PE_9,  PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  1, 0)}, // TIM1_CH1
+    {PE_10, PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  2, 1)}, // TIM1_CH2N
+    {PE_11, PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  2, 0)}, // TIM1_CH2
+    {PE_12, PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  3, 1)}, // TIM1_CH3N
+    {PE_13, PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  3, 0)}, // TIM1_CH3
+    {PE_14, PWM_1,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1,  4, 0)}, // TIM1_CH4
+
+    {PF_6,  PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
+    {PF_7,  PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
+    {PF_8,  PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
+    {PF_9,  PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
+    {NC,    NC,    0}
+};
+
+//*** SERIAL ***
+
+const PinMap PinMap_UART_TX[] = {
+    {PA_0,  UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ // {PA_2,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART2)},  // (used by ethernet)
+ // {PA_9,  UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by usb)
+    {PB_6,  UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+    {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {PC_6,  UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+    {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ // {PC_10, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+    {PC_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+    {PD_5,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PD_8,  UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // STDIO_TX
+
+    {PE_1,  UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
+    {PE_8,  UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
+
+    {PF_7,  UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
+    {PG_14, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D1
+    {NC,    NC,     0}
+};
+
+const PinMap PinMap_UART_RX[] = {
+    // {PA_1,  UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},  // (used by ethernet)
+       {PA_3,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // ARDUINO A0
+    // {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by usb)
+    // {PB_7,  UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by LED2)
+       {PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+       {PC_7,  UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+    // {PC_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+       {PC_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+       {PD_2,  UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+       {PD_6,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+       {PD_9,  UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // STDIO_RX
+
+       {PE_0,  UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
+       {PE_7,  UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
+
+       {PF_6,  UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
+
+       {PG_9,  UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D0
+       {NC,    NC,     0}
+};
+
+const PinMap PinMap_UART_RTS[] = {
+ // {PA_1,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART2)},  // (used by ethernet)
+ // {PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by usb)
+    {PA_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ // {PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // (used by LED3)
+    {PC_8,  UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
+    {PD_4,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PD_12, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {PD_15, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)}, // ARDUINO D9
+    {PE_9,  UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // ARDUINO D6
+    {PF_8,  UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
+    {PG_8,  UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+    {PG_12, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+    {NC,    NC,     0}
+};
+
+const PinMap PinMap_UART_CTS[] = {
+    {PA_0,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ // {PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // (used by usb)
+ // {PB_0,  UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART4)}, // (used by LED1)
+    {PB_13, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // (remove JP7 to use it)
+    {PC_9,  UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART5)},
+    {PD_3,  UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+    {PD_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+    {PD_14, UART_8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)}, // ARDUINO D10
+    {PE_10, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
+    {PF_9,  UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)},
+    {PG_13, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+    {PG_15, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
+
+    {NC,    NC,     0}
+};
+
+//*** SPI ***
+
+const PinMap PinMap_SPI_MOSI[] = {
+    {PA_7,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // ARDUINO D11 (remove JP6 to use it)
+    {PB_2,  SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI3)},
+    {PB_5,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+ // {PB_5,  SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+    {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+ // {PC_1,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // (used by Ethernet)
+    {PC_3,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO A2
+    {PC_12, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+    {PD_6,  SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI3)},
+    {PE_6,  SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
+    {PE_14, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
+    {PF_9,  SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)},
+    {PF_11, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)},
+    {PG_14, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI6)}, // ARDUINO D1
+    {NC,    NC,    0}
+};
+
+const PinMap PinMap_SPI_MISO[] = {
+    {PA_6,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // ARDUINO D12
+    {PB_4,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+ // {PB_4,  SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ // {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // (used by LED3)
+    {PC_2,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+    {PC_11, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+    {PE_5,  SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
+    {PE_13, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)}, // ARDUINO D3
+    {PF_8,  SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)},
+    {PG_12, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI6)},
+    {NC,    NC,    0}
+};
+
+const PinMap PinMap_SPI_SCLK[] = {
+    {PA_5,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // ARDUINO D13
+ // {PA_9,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // (used by USB)
+    {PB_3,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+ // {PB_3,  SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+    {PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+    {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // (remove JP7 to use it)
+    {PC_10, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+    {PD_3,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+    {PE_2,  SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
+    {PE_12, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
+    {PF_7,  SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)},
+ // {PG_13, SPI_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI6)}, // (used by Ethernet)
+    {NC,    NC,    0}
+};
+
+const PinMap PinMap_SPI_SSEL[] = {
+    {PA_4,  SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+ // {PA_4,  SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+ // {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
+    {PA_15, SPI_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF6_SPI3)},
+    {PB_4,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI2)},
+    {PB_9,  SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D14
+    {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
+    {PE_4,  SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)},
+    {PE_11, SPI_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI4)}, // ARDUINO D5
+    {PF_6,  SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)},
+    {NC,    NC,    0}
+};

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PinNames.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,260 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STM_PIN_DATA(MODE, PUPD, AFNUM)  ((int)(((MODE  & 0x0F) << 0) |\
+                                                ((PUPD  & 0x07) << 4) |\
+                                                ((AFNUM & 0x0F) << 7)))
+
+#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED)  ((int)(((MODE     & 0x0F) <<  0) |\
+                                                                       ((PUPD     & 0x07) <<  4) |\
+                                                                       ((AFNUM    & 0x0F) <<  7) |\
+                                                                       ((CHANNEL  & 0x0F) << 11) |\
+                                                                       ((INVERTED & 0x01) << 15)))
+
+#define STM_PIN_MODE(X)     (((X) >>  0) & 0x0F)
+#define STM_PIN_PUPD(X)     (((X) >>  4) & 0x07)
+#define STM_PIN_AFNUM(X)    (((X) >>  7) & 0x0F)
+#define STM_PIN_CHANNEL(X)  (((X) >> 11) & 0x0F)
+#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
+
+#define STM_MODE_INPUT              (0)
+#define STM_MODE_OUTPUT_PP          (1)
+#define STM_MODE_OUTPUT_OD          (2)
+#define STM_MODE_AF_PP              (3)
+#define STM_MODE_AF_OD              (4)
+#define STM_MODE_ANALOG             (5)
+#define STM_MODE_IT_RISING          (6)
+#define STM_MODE_IT_FALLING         (7)
+#define STM_MODE_IT_RISING_FALLING  (8)
+#define STM_MODE_EVT_RISING         (9)
+#define STM_MODE_EVT_FALLING        (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET       (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H, 8=I, 9=J, A=K)
+// Low nibble  = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X)  ((uint32_t)(X) & 0xF)
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+    PA_0  = 0x00,
+    PA_1  = 0x01,
+    PA_2  = 0x02,
+    PA_3  = 0x03,
+    PA_4  = 0x04,
+    PA_5  = 0x05,
+    PA_6  = 0x06,
+    PA_7  = 0x07,
+    PA_8  = 0x08,
+    PA_9  = 0x09,
+    PA_10 = 0x0A,
+    PA_11 = 0x0B,
+    PA_12 = 0x0C,
+    PA_13 = 0x0D,
+    PA_14 = 0x0E,
+    PA_15 = 0x0F,
+
+    PB_0  = 0x10,
+    PB_1  = 0x11,
+    PB_2  = 0x12,
+    PB_3  = 0x13,
+    PB_4  = 0x14,
+    PB_5  = 0x15,
+    PB_6  = 0x16,
+    PB_7  = 0x17,
+    PB_8  = 0x18,
+    PB_9  = 0x19,
+    PB_10 = 0x1A,
+    PB_11 = 0x1B,
+    PB_12 = 0x1C,
+    PB_13 = 0x1D,
+    PB_14 = 0x1E,
+    PB_15 = 0x1F,
+
+    PC_0  = 0x20,
+    PC_1  = 0x21,
+    PC_2  = 0x22,
+    PC_3  = 0x23,
+    PC_4  = 0x24,
+    PC_5  = 0x25,
+    PC_6  = 0x26,
+    PC_7  = 0x27,
+    PC_8  = 0x28,
+    PC_9  = 0x29,
+    PC_10 = 0x2A,
+    PC_11 = 0x2B,
+    PC_12 = 0x2C,
+    PC_13 = 0x2D,
+    PC_14 = 0x2E,
+    PC_15 = 0x2F,
+
+    PD_0  = 0x30,
+    PD_1  = 0x31,
+    PD_2  = 0x32,
+    PD_3  = 0x33,
+    PD_4  = 0x34,
+    PD_5  = 0x35,
+    PD_6  = 0x36,
+    PD_7  = 0x37,
+    PD_8  = 0x38,
+    PD_9  = 0x39,
+    PD_10 = 0x3A,
+    PD_11 = 0x3B,
+    PD_12 = 0x3C,
+    PD_13 = 0x3D,
+    PD_14 = 0x3E,
+    PD_15 = 0x3F,
+
+    PE_0  = 0x40,
+    PE_1  = 0x41,
+    PE_2  = 0x42,
+    PE_3  = 0x43,
+    PE_4  = 0x44,
+    PE_5  = 0x45,
+    PE_6  = 0x46,
+    PE_7  = 0x47,
+    PE_8  = 0x48,
+    PE_9  = 0x49,
+    PE_10 = 0x4A,
+    PE_11 = 0x4B,
+    PE_12 = 0x4C,
+    PE_13 = 0x4D,
+    PE_14 = 0x4E,
+    PE_15 = 0x4F,
+
+    PF_0  = 0x50,
+    PF_1  = 0x51,
+    PF_2  = 0x52,
+    PF_3  = 0x53,
+    PF_4  = 0x54,
+    PF_5  = 0x55,
+    PF_6  = 0x56,
+    PF_7  = 0x57,
+    PF_8  = 0x58,
+    PF_9  = 0x59,
+    PF_10 = 0x5A,
+    PF_11 = 0x5B,
+    PF_12 = 0x5C,
+    PF_13 = 0x5D,
+    PF_14 = 0x5E,
+    PF_15 = 0x5F,
+
+    PG_0  = 0x60,
+    PG_1  = 0x61,
+    PG_2  = 0x62,
+    PG_3  = 0x63,
+    PG_4  = 0x64,
+    PG_5  = 0x65,
+    PG_6  = 0x66,
+    PG_7  = 0x67,
+    PG_8  = 0x68,
+    PG_9  = 0x69,
+    PG_10 = 0x6A,
+    PG_11 = 0x6B,
+    PG_12 = 0x6C,
+    PG_13 = 0x6D,
+    PG_14 = 0x6E,
+    PG_15 = 0x6F,
+
+    PH_0  = 0x70,
+    PH_1  = 0x71,
+
+    // Arduino connector namings
+    A0          = PA_3,
+    A1          = PC_0,
+    A2          = PC_3,
+    A3          = PF_3,
+    A4          = PF_5,
+    A5          = PF_10,
+    D0          = PG_9,
+    D1          = PG_14,
+    D2          = PF_15,
+    D3          = PE_13,
+    D4          = PF_14,
+    D5          = PE_11,
+    D6          = PE_9,
+    D7          = PF_13,
+    D8          = PF_12,
+    D9          = PD_15,
+    D10         = PD_14,
+    D11         = PA_7,
+    D12         = PA_6,
+    D13         = PA_5,
+    D14         = PB_9,
+    D15         = PB_8,
+
+    // Generic signals namings
+    LED1        = PB_0,  // LD1 = GREEN
+    LED2        = PB_7,  // Blue
+    LED3        = PB_14, // Red
+    LED4        = PB_0,
+    USER_BUTTON = PC_13,
+    SERIAL_TX   = PD_8, // Virtual Com Port
+    SERIAL_RX   = PD_9, // Virtual Com Port
+    USBTX       = PD_8, // Virtual Com Port
+    USBRX       = PD_9, // Virtual Com Port
+    I2C_SCL     = D15,
+    I2C_SDA     = D14,
+    SPI_MOSI    = D11,
+    SPI_MISO    = D12,
+    SPI_SCK     = D13,
+    SPI_CS      = D10,
+    PWM_OUT     = D9,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+    PullNone  = 0,
+    PullUp    = 1,
+    PullDown  = 2,
+    OpenDrain = 3,
+    PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/PortNames.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,54 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PortA = 0,
+    PortB = 1,
+    PortC = 2,
+    PortD = 3,
+    PortE = 4,
+    PortF = 5,
+    PortG = 6,
+    PortH = 7,
+    PortI = 8, // kept for compilation
+    PortJ = 9, // kept for compilation
+    PortK = 10 // kept for compilation
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/device.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,72 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_DEVICE_H
+#define MBED_DEVICE_H
+
+#define DEVICE_PORTIN           1
+#define DEVICE_PORTOUT          1
+#define DEVICE_PORTINOUT        1
+
+#define DEVICE_INTERRUPTIN      1
+
+#define DEVICE_ANALOGIN         1
+#define DEVICE_ANALOGOUT        1
+
+#define DEVICE_SERIAL           1
+#define DEVICE_SERIAL_FC        0
+
+#define DEVICE_I2C              1
+#define DEVICE_I2CSLAVE         1
+
+#define DEVICE_SPI              1
+#define DEVICE_SPISLAVE         1
+
+#define DEVICE_RTC              1
+#define DEVICE_RTC_LSI          0
+
+#define DEVICE_PWMOUT           1
+
+#define DEVICE_SLEEP            1
+
+//=======================================
+
+#define DEVICE_SEMIHOST         0
+#define DEVICE_LOCALFILESYSTEM  0
+#define DEVICE_ID_LENGTH       24
+
+#define DEVICE_DEBUG_AWARENESS  0
+
+#define DEVICE_STDIO_MESSAGES   1
+
+#define DEVICE_ERROR_RED        0
+
+#include "objects.h"
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_NUCLEO_F746ZG/objects.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,119 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2016, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+    IRQn_Type irq_n;
+    uint32_t irq_index;
+    uint32_t event;
+    PinName pin;
+};
+
+struct port_s {
+    PortName port;
+    uint32_t mask;
+    PinDirection direction;
+    __IO uint32_t *reg_in;
+    __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+    ADCName adc;
+    PinName pin;
+    uint8_t channel;
+};
+
+struct dac_s {
+    DACName dac;
+    PinName pin;
+    uint32_t channel;
+};
+
+struct serial_s {
+    UARTName uart;
+    int index; // Used by irq
+    uint32_t baudrate;
+    uint32_t databits;
+    uint32_t stopbits;
+    uint32_t parity;
+    PinName pin_tx;
+    PinName pin_rx;
+#if DEVICE_SERIAL_FC
+    uint32_t hw_flow_ctl;
+    PinName pin_rts;
+    PinName pin_cts;
+#endif
+};
+
+struct spi_s {
+    SPIName spi;
+    uint32_t bits;
+    uint32_t cpol;
+    uint32_t cpha;
+    uint32_t mode;
+    uint32_t nss;
+    uint32_t br_presc;
+    PinName pin_miso;
+    PinName pin_mosi;
+    PinName pin_sclk;
+    PinName pin_ssel;
+};
+
+struct i2c_s {
+    I2CName  i2c;
+    uint32_t slave;
+};
+
+struct pwmout_s {
+    PWMName pwm;
+    PinName pin;
+    uint32_t period;
+    uint32_t pulse;
+    uint8_t channel;
+    uint8_t inverted;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/analogin_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,214 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "mbed_assert.h"
+#include "analogin_api.h"
+
+#if DEVICE_ANALOGIN
+
+#include "wait_api.h"
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+#include "mbed_error.h"
+
+ADC_HandleTypeDef AdcHandle;
+
+void analogin_init(analogin_t *obj, PinName pin)
+{
+#if defined(ADC1)
+    static int adc1_inited = 0;
+#endif
+#if defined(ADC2)
+    static int adc2_inited = 0;
+#endif
+#if defined(ADC3)
+    static int adc3_inited = 0;
+#endif
+
+    // Get the peripheral name from the pin and assign it to the object
+    obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
+    MBED_ASSERT(obj->adc != (ADCName)NC);
+
+    // Get the functions (adc channel) from the pin and assign it to the object
+    uint32_t function = pinmap_function(pin, PinMap_ADC);
+    MBED_ASSERT(function != (uint32_t)NC);
+    obj->channel = STM_PIN_CHANNEL(function);
+
+    // Configure GPIO
+    pinmap_pinout(pin, PinMap_ADC);
+
+    // Save pin number for the read function
+    obj->pin = pin;
+
+    // Check if ADC is already initialized
+    // Enable ADC clock
+#if defined(ADC1)
+    if ((obj->adc == ADC_1) && adc1_inited) return;
+    if (obj->adc == ADC_1) {
+        __HAL_RCC_ADC1_CLK_ENABLE();
+        adc1_inited = 1;
+    }
+#endif
+#if defined(ADC2)
+    if ((obj->adc == ADC_2) && adc2_inited) return;
+    if (obj->adc == ADC_2) {
+        __HAL_RCC_ADC2_CLK_ENABLE();
+        adc2_inited = 1;
+    }
+#endif
+#if defined(ADC3)
+    if ((obj->adc == ADC_3) && adc3_inited) return;
+    if (obj->adc == ADC_3) {
+        __HAL_RCC_ADC3_CLK_ENABLE();
+        adc3_inited = 1;
+    }
+#endif
+
+    // Configure ADC
+    AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+    AdcHandle.Init.ClockPrescaler        = ADC_CLOCKPRESCALER_PCLK_DIV4;
+    AdcHandle.Init.Resolution            = ADC_RESOLUTION_12B;
+    AdcHandle.Init.ScanConvMode          = DISABLE;
+    AdcHandle.Init.ContinuousConvMode    = DISABLE;
+    AdcHandle.Init.DiscontinuousConvMode = DISABLE;
+    AdcHandle.Init.NbrOfDiscConversion   = 0;
+    AdcHandle.Init.ExternalTrigConvEdge  = ADC_EXTERNALTRIGCONVEDGE_NONE;
+    AdcHandle.Init.ExternalTrigConv      = ADC_EXTERNALTRIGCONV_T1_CC1;
+    AdcHandle.Init.DataAlign             = ADC_DATAALIGN_RIGHT;
+    AdcHandle.Init.NbrOfConversion       = 1;
+    AdcHandle.Init.DMAContinuousRequests = DISABLE;
+    AdcHandle.Init.EOCSelection          = DISABLE;
+
+    if (HAL_ADC_Init(&AdcHandle) != HAL_OK) {
+        error("Cannot initialize ADC");
+    }
+}
+
+static inline uint16_t adc_read(analogin_t *obj)
+{
+    ADC_ChannelConfTypeDef sConfig = {0};
+
+    AdcHandle.Instance = (ADC_TypeDef *)(obj->adc);
+
+    // Configure ADC channel
+    sConfig.Rank         = 1;
+    sConfig.SamplingTime = ADC_SAMPLETIME_15CYCLES;
+    sConfig.Offset       = 0;
+
+    switch (obj->channel) {
+        case 0:
+            sConfig.Channel = ADC_CHANNEL_0;
+            break;
+        case 1:
+            sConfig.Channel = ADC_CHANNEL_1;
+            break;
+        case 2:
+            sConfig.Channel = ADC_CHANNEL_2;
+            break;
+        case 3:
+            sConfig.Channel = ADC_CHANNEL_3;
+            break;
+        case 4:
+            sConfig.Channel = ADC_CHANNEL_4;
+            break;
+        case 5:
+            sConfig.Channel = ADC_CHANNEL_5;
+            break;
+        case 6:
+            sConfig.Channel = ADC_CHANNEL_6;
+            break;
+        case 7:
+            sConfig.Channel = ADC_CHANNEL_7;
+            break;
+        case 8:
+            sConfig.Channel = ADC_CHANNEL_8;
+            break;
+        case 9:
+            sConfig.Channel = ADC_CHANNEL_9;
+            break;
+        case 10:
+            sConfig.Channel = ADC_CHANNEL_10;
+            break;
+        case 11:
+            sConfig.Channel = ADC_CHANNEL_11;
+            break;
+        case 12:
+            sConfig.Channel = ADC_CHANNEL_12;
+            break;
+        case 13:
+            sConfig.Channel = ADC_CHANNEL_13;
+            break;
+        case 14:
+            sConfig.Channel = ADC_CHANNEL_14;
+            break;
+        case 15:
+            sConfig.Channel = ADC_CHANNEL_15;
+            break;
+        case 16:
+            sConfig.Channel = ADC_CHANNEL_16;
+            break;
+        case 17:
+            sConfig.Channel = ADC_CHANNEL_17;
+            break;
+        case 18:
+            sConfig.Channel = ADC_CHANNEL_18;
+            break;
+        default:
+            return 0;
+    }
+
+    if (HAL_ADC_ConfigChannel(&AdcHandle, &sConfig) != HAL_OK) {
+        error("Cannot configure ADC channel");
+    }
+
+    HAL_ADC_Start(&AdcHandle); // Start conversion
+
+    // Wait end of conversion and get value
+    HAL_ADC_PollForConversion(&AdcHandle, 10);
+    if (HAL_ADC_GetState(&AdcHandle) & HAL_ADC_STATE_EOC_REG) {
+        return (HAL_ADC_GetValue(&AdcHandle));
+    } else {
+        return 0;
+    }
+}
+
+uint16_t analogin_read_u16(analogin_t *obj)
+{
+    uint16_t value = adc_read(obj);
+    // 12-bit to 16-bit conversion
+    value = ((value << 4) & (uint16_t)0xFFF0) | ((value >> 8) & (uint16_t)0x000F);
+    return value;
+}
+
+float analogin_read(analogin_t *obj)
+{
+    uint16_t value = adc_read(obj);
+    return (float)value * (1.0f / (float)0xFFF); // 12 bits range
+}
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/analogout_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,147 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "analogout_api.h"
+
+#if DEVICE_ANALOGOUT
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "stm32f7xx_hal.h"
+#include "PeripheralPins.h"
+
+#define DAC_RANGE    (0xFFF) // 12 bits
+#define DAC_NB_BITS  (12)
+
+DAC_HandleTypeDef    DacHandle;
+static DAC_ChannelConfTypeDef sConfig;
+
+void analogout_init(dac_t *obj, PinName pin) {
+    uint32_t channel ;
+    HAL_StatusTypeDef status;
+
+    // Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
+    obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
+    // Get the functions (dac channel) from the pin and assign it to the object
+    uint32_t function = pinmap_function(pin, PinMap_DAC);
+    MBED_ASSERT(function != (uint32_t)NC);
+    // Save the channel for the write and read functions
+    obj->channel = STM_PIN_CHANNEL(function);
+
+    if (obj->dac == (DACName)NC) {
+        error("DAC pin mapping failed");
+    }
+
+    // Configure GPIO
+    pinmap_pinout(pin, PinMap_DAC);
+
+    __GPIOA_CLK_ENABLE();
+
+    __DAC_CLK_ENABLE();
+
+    DacHandle.Instance = DAC;
+
+    status = HAL_DAC_Init(&DacHandle);
+    if (status != HAL_OK) {
+        error("HAL_DAC_Init failed");
+    }
+
+    sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
+    sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
+
+    if (obj->channel == 1) {
+        channel = DAC_CHANNEL_1;
+    } else {
+        channel = DAC_CHANNEL_2;
+    }
+
+    if (HAL_DAC_ConfigChannel(&DacHandle, &sConfig, channel) != HAL_OK) {
+        error("HAL_DAC_ConfigChannel failed");
+    }
+
+    if (HAL_DAC_Start(&DacHandle, channel) != HAL_OK) {
+        error("HAL_DAC_Start failed");
+    }
+
+    if (HAL_DAC_SetValue(&DacHandle, channel, DAC_ALIGN_12B_R, 0x000) != HAL_OK) {
+        error("HAL_DAC_SetValue failed");
+    }
+
+}
+
+void analogout_free(dac_t *obj) {
+}
+
+static inline void dac_write(dac_t *obj, int value) {
+    HAL_StatusTypeDef status = HAL_ERROR;
+
+    if (obj->channel == 1) {
+        status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_1, DAC_ALIGN_12B_R, (value & DAC_RANGE));
+    } else if (obj->channel == 2) {
+        status = HAL_DAC_SetValue(&DacHandle, DAC_CHANNEL_2, DAC_ALIGN_12B_R, (value & DAC_RANGE));
+    }
+
+    if (status != HAL_OK) {
+        error("DAC pin mapping failed");
+    }
+}
+
+static inline int dac_read(dac_t *obj) {
+    if (obj->channel == 1) {
+        return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_1);
+    } else if (obj->channel == 2) {
+        return (int)HAL_DAC_GetValue(&DacHandle, DAC_CHANNEL_2);
+    }
+    return 0;   /* Just silented warning */
+}
+
+void analogout_write(dac_t *obj, float value) {
+    if (value < 0.0f) {
+        dac_write(obj, 0); // Min value
+    } else if (value > 1.0f) {
+        dac_write(obj, (int)DAC_RANGE); // Max value
+    } else {
+        dac_write(obj, (int)(value * (float)DAC_RANGE));
+    }
+}
+
+void analogout_write_u16(dac_t *obj, uint16_t value) {
+    dac_write(obj, value >> (16 - DAC_NB_BITS));
+}
+
+float analogout_read(dac_t *obj) {
+    uint32_t value = dac_read(obj);
+    return (float)value * (1.0f / (float)DAC_RANGE);
+}
+
+uint16_t analogout_read_u16(dac_t *obj) {
+    uint32_t value = dac_read(obj);
+    return (value << 4) | ((value >> 8) & 0x000F); // Conversion from 12 to 16 bits
+}
+
+#endif // DEVICE_ANALOGOUT

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/gpio_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,76 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "gpio_api.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+uint32_t gpio_set(PinName pin)
+{
+    MBED_ASSERT(pin != (PinName)NC);
+
+    pin_function(pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+    return (uint32_t)(1 << ((uint32_t)pin & 0xF)); // Return the pin mask
+}
+
+void gpio_init(gpio_t *obj, PinName pin)
+{
+    obj->pin = pin;
+    if (pin == (PinName)NC)
+        return;
+
+    uint32_t port_index = STM_PORT(pin);
+
+    // Enable GPIO clock
+    uint32_t gpio_add = Set_GPIO_Clock(port_index);
+    GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+    // Fill GPIO object structure for future use
+    obj->mask        = gpio_set(pin);
+    obj->reg_in      = &gpio->IDR;
+    obj->reg_set_clr = &gpio->BSRR;
+}
+
+void gpio_mode(gpio_t *obj, PinMode mode)
+{
+    pin_mode(obj->pin, mode);
+}
+
+void gpio_dir(gpio_t *obj, PinDirection direction)
+{
+    MBED_ASSERT(obj->pin != (PinName)NC);
+    if (direction == PIN_OUTPUT) {
+        pin_function(obj->pin, STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
+    } else { // PIN_INPUT
+        pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+    }
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/gpio_irq_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,332 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include <stddef.h>
+#include "cmsis.h"
+#include "gpio_irq_api.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+#define EDGE_NONE (0)
+#define EDGE_RISE (1)
+#define EDGE_FALL (2)
+#define EDGE_BOTH (3)
+
+// Number of EXTI irq vectors (EXTI0, EXTI1, EXTI2, EXTI3, EXTI4, EXTI5_9, EXTI10_15)
+#define CHANNEL_NUM (7)
+
+// Max pins for one line (max with EXTI10_15)
+#define MAX_PIN_LINE (6)
+
+typedef struct gpio_channel {
+    uint32_t pin_mask;                   // bitmask representing which pins are configured for receiving interrupts
+    uint32_t channel_ids[MAX_PIN_LINE];  // mbed "gpio_irq_t gpio_irq" field of instance
+    uint32_t channel_gpio[MAX_PIN_LINE]; // base address of gpio port group
+    uint32_t channel_pin[MAX_PIN_LINE];  // pin number in port group
+} gpio_channel_t;
+
+static gpio_channel_t channels[CHANNEL_NUM] = {
+    {.pin_mask = 0},
+    {.pin_mask = 0},
+    {.pin_mask = 0},
+    {.pin_mask = 0},
+    {.pin_mask = 0},
+    {.pin_mask = 0},
+    {.pin_mask = 0}
+};
+
+// Used to return the index for channels array.
+static uint32_t pin_base_nr[16] = {
+    // EXTI0
+    0, // pin 0
+    // EXTI1
+    0, // pin 1
+    // EXTI2
+    0, // pin 2
+    // EXTI3
+    0, // pin 3
+    // EXTI4
+    0, // pin 4
+    // EXTI5_9
+    0, // pin 5
+    1, // pin 6
+    2, // pin 7
+    3, // pin 8
+    4, // pin 9
+    // EXTI10_15
+    0, // pin 10
+    1, // pin 11
+    2, // pin 12
+    3, // pin 13
+    4, // pin 14
+    5  // pin 15
+};
+
+static gpio_irq_handler irq_handler;
+
+static void handle_interrupt_in(uint32_t irq_index, uint32_t max_num_pin_line)
+{
+    gpio_channel_t *gpio_channel = &channels[irq_index];
+    uint32_t gpio_idx;
+
+    for (gpio_idx = 0; gpio_idx < max_num_pin_line; gpio_idx++) {
+        uint32_t current_mask = (1 << gpio_idx);
+
+        if (gpio_channel->pin_mask & current_mask) {
+            // Retrieve the gpio and pin that generate the irq
+            GPIO_TypeDef *gpio = (GPIO_TypeDef *)(gpio_channel->channel_gpio[gpio_idx]);
+            uint32_t pin = (uint32_t)(1 << (gpio_channel->channel_pin[gpio_idx]));
+
+            // Clear interrupt flag
+            if (__HAL_GPIO_EXTI_GET_FLAG(pin) != RESET) {
+                __HAL_GPIO_EXTI_CLEAR_FLAG(pin);
+
+                if (gpio_channel->channel_ids[gpio_idx] == 0) continue;
+
+                // Check which edge has generated the irq
+                if ((gpio->IDR & pin) == 0) {
+                    irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_FALL);
+                } else  {
+                    irq_handler(gpio_channel->channel_ids[gpio_idx], IRQ_RISE);
+                }
+            }
+        }
+    }
+}
+
+// EXTI line 0
+static void gpio_irq0(void)
+{
+    handle_interrupt_in(0, 1);
+}
+
+// EXTI line 1
+static void gpio_irq1(void)
+{
+    handle_interrupt_in(1, 1);
+}
+
+// EXTI line 2
+static void gpio_irq2(void)
+{
+    handle_interrupt_in(2, 1);
+}
+
+// EXTI line 3
+static void gpio_irq3(void)
+{
+    handle_interrupt_in(3, 1);
+}
+
+// EXTI line 4
+static void gpio_irq4(void)
+{
+    handle_interrupt_in(4, 1);
+}
+
+// EXTI lines 5 to 9
+static void gpio_irq5(void)
+{
+    handle_interrupt_in(5, 5);
+}
+
+// EXTI lines 10 to 15
+static void gpio_irq6(void)
+{
+    handle_interrupt_in(6, 6);
+}
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+int gpio_irq_init(gpio_irq_t *obj, PinName pin, gpio_irq_handler handler, uint32_t id)
+{
+    IRQn_Type irq_n = (IRQn_Type)0;
+    uint32_t vector = 0;
+    uint32_t irq_index;
+    gpio_channel_t *gpio_channel;
+    uint32_t gpio_idx;
+
+    if (pin == NC) return -1;
+
+    uint32_t port_index = STM_PORT(pin);
+    uint32_t pin_index  = STM_PIN(pin);
+
+    // Select irq number and interrupt routine
+    switch (pin_index) {
+        case 0:
+            irq_n = EXTI0_IRQn;
+            vector = (uint32_t)&gpio_irq0;
+            irq_index = 0;
+            break;
+        case 1:
+            irq_n = EXTI1_IRQn;
+            vector = (uint32_t)&gpio_irq1;
+            irq_index = 1;
+            break;
+        case 2:
+            irq_n = EXTI2_IRQn;
+            vector = (uint32_t)&gpio_irq2;
+            irq_index = 2;
+            break;
+        case 3:
+            irq_n = EXTI3_IRQn;
+            vector = (uint32_t)&gpio_irq3;
+            irq_index = 3;
+            break;
+        case 4:
+            irq_n = EXTI4_IRQn;
+            vector = (uint32_t)&gpio_irq4;
+            irq_index = 4;
+            break;
+        case 5:
+        case 6:
+        case 7:
+        case 8:
+        case 9:
+            irq_n = EXTI9_5_IRQn;
+            vector = (uint32_t)&gpio_irq5;
+            irq_index = 5;
+            break;
+        case 10:
+        case 11:
+        case 12:
+        case 13:
+        case 14:
+        case 15:
+            irq_n = EXTI15_10_IRQn;
+            vector = (uint32_t)&gpio_irq6;
+            irq_index = 6;
+            break;
+        default:
+            error("InterruptIn error: pin not supported.\n");
+            return -1;
+    }
+
+    // Enable GPIO clock
+    uint32_t gpio_add = Set_GPIO_Clock(port_index);
+
+    // Configure GPIO
+    pin_function(pin, STM_PIN_DATA(STM_MODE_IT_FALLING, GPIO_NOPULL, 0));
+
+    // Enable EXTI interrupt
+    NVIC_SetVector(irq_n, vector);
+    NVIC_EnableIRQ(irq_n);
+
+    // Save informations for future use
+    obj->irq_n = irq_n;
+    obj->irq_index = irq_index;
+    obj->event = EDGE_NONE;
+    obj->pin = pin;
+
+    gpio_channel = &channels[irq_index];
+    gpio_idx = pin_base_nr[pin_index];
+    gpio_channel->pin_mask |= (1 << gpio_idx);
+    gpio_channel->channel_ids[gpio_idx] = id;
+    gpio_channel->channel_gpio[gpio_idx] = gpio_add;
+    gpio_channel->channel_pin[gpio_idx] = pin_index;
+
+    irq_handler = handler;
+
+    return 0;
+}
+
+void gpio_irq_free(gpio_irq_t *obj)
+{
+    gpio_channel_t *gpio_channel = &channels[obj->irq_index];
+    uint32_t pin_index  = STM_PIN(obj->pin);
+    uint32_t gpio_idx = pin_base_nr[pin_index];
+
+    gpio_channel->pin_mask &= ~(1 << gpio_idx);
+    gpio_channel->channel_ids[gpio_idx] = 0;
+    gpio_channel->channel_gpio[gpio_idx] = 0;
+    gpio_channel->channel_pin[gpio_idx] = 0;
+
+    // Disable EXTI line
+    pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+    obj->event = EDGE_NONE;
+}
+
+void gpio_irq_set(gpio_irq_t *obj, gpio_irq_event event, uint32_t enable)
+{
+    uint32_t mode = STM_MODE_IT_EVT_RESET;
+    uint32_t pull = GPIO_NOPULL;
+
+    if (enable) {
+        if (event == IRQ_RISE) {
+            if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
+                mode = STM_MODE_IT_RISING_FALLING;
+                obj->event = EDGE_BOTH;
+            } else { // NONE or RISE
+                mode = STM_MODE_IT_RISING;
+                obj->event = EDGE_RISE;
+            }
+        }
+        if (event == IRQ_FALL) {
+            if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
+                mode = STM_MODE_IT_RISING_FALLING;
+                obj->event = EDGE_BOTH;
+            } else { // NONE or FALL
+                mode = STM_MODE_IT_FALLING;
+                obj->event = EDGE_FALL;
+            }
+        }
+    } else { // Disable
+        if (event == IRQ_RISE) {
+            if ((obj->event == EDGE_FALL) || (obj->event == EDGE_BOTH)) {
+                mode = STM_MODE_IT_FALLING;
+                obj->event = EDGE_FALL;
+            } else { // NONE or RISE
+                mode = STM_MODE_IT_EVT_RESET;
+                obj->event = EDGE_NONE;
+            }
+        }
+        if (event == IRQ_FALL) {
+            if ((obj->event == EDGE_RISE) || (obj->event == EDGE_BOTH)) {
+                mode = STM_MODE_IT_RISING;
+                obj->event = EDGE_RISE;
+            } else { // NONE or FALL
+                mode = STM_MODE_IT_EVT_RESET;
+                obj->event = EDGE_NONE;
+            }
+        }
+    }
+
+    pin_function(obj->pin, STM_PIN_DATA(mode, pull, 0));
+}
+
+void gpio_irq_enable(gpio_irq_t *obj)
+{
+    NVIC_EnableIRQ(obj->irq_n);
+}
+
+void gpio_irq_disable(gpio_irq_t *obj)
+{
+    NVIC_DisableIRQ(obj->irq_n);
+    obj->event = EDGE_NONE;
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/gpio_object.h	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,75 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+    PinName  pin;
+    uint32_t mask;
+    __IO uint32_t *reg_in;
+    __IO uint32_t *reg_set_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+    MBED_ASSERT(obj->pin != (PinName)NC);
+    if (value) {
+        *obj->reg_set_clr = obj->mask;
+    } else {
+        *obj->reg_set_clr = obj->mask << 16;
+    }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+    MBED_ASSERT(obj->pin != (PinName)NC);
+    return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj)
+{
+    return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/i2c_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,443 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "i2c_api.h"
+
+#if DEVICE_I2C
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+#include "mbed_error.h"
+
+/* Timeout values for flags and events waiting loops. These timeouts are
+   not based on accurate values, they just guarantee that the application will
+   not remain stuck if the I2C communication is corrupted. */
+#define FLAG_TIMEOUT ((int)0x4000)
+#define LONG_TIMEOUT ((int)0x8000)
+
+I2C_HandleTypeDef I2cHandle;
+
+int i2c1_inited = 0;
+int i2c2_inited = 0;
+int i2c3_inited = 0;
+int i2c4_inited = 0;
+
+
+void i2c_init(i2c_t *obj, PinName sda, PinName scl)
+{
+    // Determine the I2C to use
+    I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
+    I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
+
+    obj->i2c = (I2CName)pinmap_merge(i2c_sda, i2c_scl);
+    MBED_ASSERT(obj->i2c != (I2CName)NC);
+
+    // Enable I2C clock and pinout if not done
+    if ((obj->i2c == I2C_1) && !i2c1_inited) {
+        i2c1_inited = 1;
+        __HAL_RCC_I2C1_CONFIG(RCC_I2C1CLKSOURCE_PCLK1);
+        __HAL_RCC_I2C1_CLK_ENABLE();
+        // Configure I2C1 pins
+        pinmap_pinout(sda, PinMap_I2C_SDA);
+        pinmap_pinout(scl, PinMap_I2C_SCL);
+        pin_mode(sda, OpenDrain);
+        pin_mode(scl, OpenDrain);
+    }
+
+    #if defined(I2C2_BASE)
+        if ((obj->i2c == I2C_2) && !i2c2_inited) {
+            i2c2_inited = 1;
+            __HAL_RCC_I2C2_CONFIG(RCC_I2C2CLKSOURCE_PCLK1);
+            __HAL_RCC_I2C2_CLK_ENABLE();
+            // Configure I2C2 pins
+            pinmap_pinout(sda, PinMap_I2C_SDA);
+            pinmap_pinout(scl, PinMap_I2C_SCL);
+            pin_mode(sda, OpenDrain);
+            pin_mode(scl, OpenDrain);
+        }
+    #endif
+
+    #if defined(I2C3_BASE)
+        if ((obj->i2c == I2C_3) && !i2c3_inited) {
+            i2c3_inited = 1;
+            __HAL_RCC_I2C3_CONFIG(RCC_I2C3CLKSOURCE_PCLK1);
+            __HAL_RCC_I2C3_CLK_ENABLE();
+            // Configure I2C3 pins
+            pinmap_pinout(sda, PinMap_I2C_SDA);
+            pinmap_pinout(scl, PinMap_I2C_SCL);
+            pin_mode(sda, OpenDrain);
+            pin_mode(scl, OpenDrain);
+        }
+    #endif
+
+    #if defined(I2C4_BASE)
+        if ((obj->i2c == I2C_4) && !i2c4_inited) {
+            i2c4_inited = 1;
+            __HAL_RCC_I2C4_CONFIG(RCC_I2C4CLKSOURCE_PCLK1);
+            __HAL_RCC_I2C4_CLK_ENABLE();
+            // Configure I2C4 pins
+            pinmap_pinout(sda, PinMap_I2C_SDA);
+            pinmap_pinout(scl, PinMap_I2C_SCL);
+            pin_mode(sda, OpenDrain);
+            pin_mode(scl, OpenDrain);
+        }
+    #endif
+
+    // Reset to clear pending flags if any
+    i2c_reset(obj);
+
+    // I2C configuration
+    i2c_frequency(obj, 100000); // 100 kHz per default
+}
+
+void i2c_frequency(i2c_t *obj, int hz)
+{
+    uint32_t tim = 0;
+
+    MBED_ASSERT((hz == 100000) || (hz == 400000) || (hz == 1000000));
+
+    I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+    int timeout;
+
+    // wait before init
+    timeout = LONG_TIMEOUT;
+    while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0)) {}
+
+    /*
+       Values calculated with I2C_Timing_Configuration tool (excel file)
+       * Standard mode (up to 100 kHz)
+       * Fast Mode (up to 400 kHz)
+       * Fast Mode Plus (up to 1 MHz)
+       Below values obtained with:
+       - I2Cx clock source = APB1CLK = 54 MHz
+       - Analog filter delay = ON
+       - Digital filter coefficient = 0
+    */
+    switch (hz) {
+        case 100000:
+            tim = 0x10916998; // Standard mode with Rise time = 120ns, Fall time = 120ns
+            break;
+        case 400000:
+            tim = 0x00B11B54; // Fast Mode with Rise time = 120ns, Fall time = 120ns
+            break;
+        case 1000000:
+            tim = 0x0090091B; // Fast Mode Plus with Rise time = 120ns, Fall time = 10ns
+            break;
+        default:
+            break;
+    }
+
+    // I2C configuration
+    I2cHandle.Init.Timing           = tim;
+    I2cHandle.Init.AddressingMode   = I2C_ADDRESSINGMODE_7BIT;
+    I2cHandle.Init.DualAddressMode  = I2C_DUALADDRESS_DISABLE;
+    I2cHandle.Init.GeneralCallMode  = I2C_GENERALCALL_DISABLE;
+    I2cHandle.Init.NoStretchMode    = I2C_NOSTRETCH_DISABLE;
+    I2cHandle.Init.OwnAddress1      = 0;
+    I2cHandle.Init.OwnAddress2      = 0;
+    I2cHandle.Init.OwnAddress2Masks = I2C_OA2_NOMASK;
+
+    if (HAL_I2C_Init(&I2cHandle) != HAL_OK) {
+        error("Cannot initialize I2C");
+    }
+}
+
+inline int i2c_start(i2c_t *obj)
+{
+    I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+    int timeout;
+
+    I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+    // Clear Acknowledge failure flag
+    __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_AF);
+
+    // Wait the STOP condition has been previously correctly sent
+    timeout = FLAG_TIMEOUT;
+    while ((i2c->CR2 & I2C_CR2_STOP) == I2C_CR2_STOP){
+        if ((timeout--) == 0) {
+            return 1;
+        }
+    }
+
+    // Generate the START condition
+    i2c->CR2 |= I2C_CR2_START;
+
+    // Wait the START condition has been correctly sent
+    timeout = FLAG_TIMEOUT;
+    while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == RESET) {
+        if ((timeout--) == 0) {
+            return 1;
+        }
+    }
+
+    return 0;
+}
+
+inline int i2c_stop(i2c_t *obj)
+{
+    I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+
+    // Generate the STOP condition
+    i2c->CR2 |= I2C_CR2_STOP;
+
+    return 0;
+}
+
+int i2c_read(i2c_t *obj, int address, char *data, int length, int stop)
+{
+    I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+    I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+    int timeout;
+    int count;
+    int value;
+
+    /* update CR2 register */
+    i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
+               | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_READ);
+
+    // Read all bytes
+    for (count = 0; count < length; count++) {
+        value = i2c_byte_read(obj, 0);
+        data[count] = (char)value;
+    }
+
+    // Wait transfer complete
+    timeout = LONG_TIMEOUT;
+    while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
+        timeout--;
+        if (timeout == 0) {
+            return -1;
+        }
+    }
+
+    __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
+
+    // If not repeated start, send stop.
+    if (stop) {
+        i2c_stop(obj);
+        /* Wait until STOPF flag is set */
+        timeout = FLAG_TIMEOUT;
+        while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
+            timeout--;
+            if (timeout == 0) {
+                return -1;
+            }
+        }
+        /* Clear STOP Flag */
+        __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
+    }
+
+    return length;
+}
+
+int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop)
+{
+    I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+    I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+    int timeout;
+    int count;
+
+    /* update CR2 register */
+    i2c->CR2 = (i2c->CR2 & (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN | I2C_CR2_START | I2C_CR2_STOP)))
+               | (uint32_t)(((uint32_t)address & I2C_CR2_SADD) | (((uint32_t)length << 16) & I2C_CR2_NBYTES) | (uint32_t)I2C_SOFTEND_MODE | (uint32_t)I2C_GENERATE_START_WRITE);
+
+    for (count = 0; count < length; count++) {
+        i2c_byte_write(obj, data[count]);
+    }
+
+    // Wait transfer complete
+    timeout = FLAG_TIMEOUT;
+    while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TC) == RESET) {
+        timeout--;
+        if (timeout == 0) {
+            return -1;
+        }
+    }
+
+    __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_TC);
+
+    // If not repeated start, send stop.
+    if (stop) {
+        i2c_stop(obj);
+        /* Wait until STOPF flag is set */
+        timeout = FLAG_TIMEOUT;
+        while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_STOPF) == RESET) {
+            timeout--;
+            if (timeout == 0) {
+                return -1;
+            }
+        }
+        /* Clear STOP Flag */
+        __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_STOPF);
+    }
+
+    return count;
+}
+
+int i2c_byte_read(i2c_t *obj, int last)
+{
+    I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+    int timeout;
+
+    // Wait until the byte is received
+    timeout = FLAG_TIMEOUT;
+    while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_RXNE) == RESET) {
+        if ((timeout--) == 0) {
+            return -1;
+        }
+    }
+
+    return (int)i2c->RXDR;
+}
+
+int i2c_byte_write(i2c_t *obj, int data)
+{
+    I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+    int timeout;
+
+    // Wait until the previous byte is transmitted
+    timeout = FLAG_TIMEOUT;
+    while (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_TXIS) == RESET) {
+        if ((timeout--) == 0) {
+            return 0;
+        }
+    }
+
+    i2c->TXDR = (uint8_t)data;
+
+    return 1;
+}
+
+void i2c_reset(i2c_t *obj)
+{
+    int timeout;
+
+    // wait before reset
+    timeout = LONG_TIMEOUT;
+    while ((__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY)) && (timeout-- != 0));
+
+    __I2C1_FORCE_RESET();
+    __I2C1_RELEASE_RESET();
+}
+
+#if DEVICE_I2CSLAVE
+
+void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask)
+{
+    I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+    uint16_t tmpreg;
+
+    // disable
+    i2c->OAR1 &= (uint32_t)(~I2C_OAR1_OA1EN);
+    // Get the old register value
+    tmpreg = i2c->OAR1;
+    // Reset address bits
+    tmpreg &= 0xFC00;
+    // Set new address
+    tmpreg |= (uint16_t)((uint16_t)address & (uint16_t)0x00FE); // 7-bits
+    // Store the new register value
+    i2c->OAR1 = tmpreg;
+    // enable
+    i2c->OAR1 |= I2C_OAR1_OA1EN;
+}
+
+void i2c_slave_mode(i2c_t *obj, int enable_slave)
+{
+
+    I2C_TypeDef *i2c = (I2C_TypeDef *)(obj->i2c);
+    uint16_t tmpreg;
+
+    // Get the old register value
+    tmpreg = i2c->OAR1;
+
+    // Enable / disable slave
+    if (enable_slave == 1) {
+        tmpreg |= I2C_OAR1_OA1EN;
+    } else {
+        tmpreg &= (uint32_t)(~I2C_OAR1_OA1EN);
+    }
+
+    // Set new mode
+    i2c->OAR1 = tmpreg;
+
+}
+
+// See I2CSlave.h
+#define NoData         0 // the slave has not been addressed
+#define ReadAddressed  1 // the master has requested a read from this slave (slave = transmitter)
+#define WriteGeneral   2 // the master is writing to all slave
+#define WriteAddressed 3 // the master is writing to this slave (slave = receiver)
+
+int i2c_slave_receive(i2c_t *obj)
+{
+    I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+    int retValue = NoData;
+
+    if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_BUSY) == 1) {
+        if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_ADDR) == 1) {
+            if (__HAL_I2C_GET_FLAG(&I2cHandle, I2C_FLAG_DIR) == 1)
+                retValue = ReadAddressed;
+            else
+                retValue = WriteAddressed;
+            __HAL_I2C_CLEAR_FLAG(&I2cHandle, I2C_FLAG_ADDR);
+        }
+    }
+
+    return (retValue);
+}
+
+int i2c_slave_read(i2c_t *obj, char *data, int length)
+{
+    char size = 0;
+
+    while (size < length) data[size++] = (char)i2c_byte_read(obj, 0);
+
+    return size;
+}
+
+int i2c_slave_write(i2c_t *obj, const char *data, int length)
+{
+    char size = 0;
+    I2cHandle.Instance = (I2C_TypeDef *)(obj->i2c);
+
+    do {
+        i2c_byte_write(obj, data[size]);
+        size++;
+    } while (size < length);
+
+    return size;
+}
+
+
+#endif // DEVICE_I2CSLAVE
+
+#endif // DEVICE_I2C

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/mbed_overrides.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "cmsis.h"
+#include "us_ticker_api.h"
+
+HAL_StatusTypeDef HAL_Init(void);
+
+// This function is called after RAM initialization and before main.
+void mbed_sdk_init()
+{
+    // Update the SystemCoreClock variable.
+    SystemCoreClockUpdate();
+    // Need to restart HAL driver after the RAM is initialized
+    HAL_Init();
+}
+
+
+/**
+  * @brief This function provides accurate delay (in milliseconds) based
+  *        on variable incremented.
+  * @note This function is the modified version of the __weak version contained in
+  *       stm32f7xx_hal.c, using us_ticker
+  * @param Delay: specifies the delay time length, in milliseconds.
+  * @retval None
+*/
+void HAL_Delay(__IO uint32_t Delay)
+{
+    uint32_t start = us_ticker_read();
+    while ((us_ticker_read() - start) < (uint32_t)(Delay * 1000));
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/pinmap.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,181 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "pinmap.h"
+#include "PortNames.h"
+#include "mbed_error.h"
+
+// GPIO mode look-up table
+static const uint32_t gpio_mode[13] = {
+    0x00000000, //  0 = GPIO_MODE_INPUT
+    0x00000001, //  1 = GPIO_MODE_OUTPUT_PP
+    0x00000011, //  2 = GPIO_MODE_OUTPUT_OD
+    0x00000002, //  3 = GPIO_MODE_AF_PP
+    0x00000012, //  4 = GPIO_MODE_AF_OD
+    0x00000003, //  5 = GPIO_MODE_ANALOG
+    0x10110000, //  6 = GPIO_MODE_IT_RISING
+    0x10210000, //  7 = GPIO_MODE_IT_FALLING
+    0x10310000, //  8 = GPIO_MODE_IT_RISING_FALLING
+    0x10120000, //  9 = GPIO_MODE_EVT_RISING
+    0x10220000, // 10 = GPIO_MODE_EVT_FALLING
+    0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
+    0x10000000  // 12 = Reset GPIO_MODE_IT_EVT
+};
+
+// Enable GPIO clock and return GPIO base address
+uint32_t Set_GPIO_Clock(uint32_t port_idx)
+{
+    uint32_t gpio_add = 0;
+    switch (port_idx) {
+        case PortA:
+            gpio_add = GPIOA_BASE;
+            __GPIOA_CLK_ENABLE();
+            break;
+        case PortB:
+            gpio_add = GPIOB_BASE;
+            __GPIOB_CLK_ENABLE();
+            break;
+        case PortC:
+            gpio_add = GPIOC_BASE;
+            __GPIOC_CLK_ENABLE();
+            break;
+#if defined GPIOD_BASE
+        case PortD:
+            gpio_add = GPIOD_BASE;
+            __GPIOD_CLK_ENABLE();
+            break;
+#endif
+#if defined GPIOE_BASE
+        case PortE:
+            gpio_add = GPIOE_BASE;
+            __GPIOE_CLK_ENABLE();
+            break;
+#endif
+#if defined GPIOF_BASE
+        case PortF:
+            gpio_add = GPIOF_BASE;
+            __GPIOF_CLK_ENABLE();
+            break;
+#endif
+#if defined GPIOG_BASE
+        case PortG:
+            gpio_add = GPIOG_BASE;
+            __GPIOG_CLK_ENABLE();
+            break;
+#endif
+#if defined GPIOH_BASE
+        case PortH:
+            gpio_add = GPIOH_BASE;
+            __GPIOH_CLK_ENABLE();
+            break;
+#endif
+#if defined GPIOI_BASE
+        case PortI:
+            gpio_add = GPIOI_BASE;
+            __GPIOI_CLK_ENABLE();
+            break;
+#endif
+#if defined GPIOJ_BASE
+        case PortJ:
+            gpio_add = GPIOJ_BASE;
+            __GPIOJ_CLK_ENABLE();
+            break;
+#endif
+#if defined GPIOK_BASE
+        case PortK:
+            gpio_add = GPIOK_BASE;
+            __GPIOK_CLK_ENABLE();
+            break;
+#endif
+        default:
+            error("Pinmap error: wrong port number.");
+            break;
+    }
+    return gpio_add;
+}
+
+/**
+ * Configure pin (mode, speed, output type and pull-up/pull-down)
+ */
+void pin_function(PinName pin, int data)
+{
+    MBED_ASSERT(pin != (PinName)NC);
+    // Get the pin informations
+    uint32_t mode  = STM_PIN_MODE(data);
+    uint32_t pupd  = STM_PIN_PUPD(data);
+    uint32_t afnum = STM_PIN_AFNUM(data);
+
+    uint32_t port_index = STM_PORT(pin);
+    uint32_t pin_index  = STM_PIN(pin);
+
+    // Enable GPIO clock
+    uint32_t gpio_add = Set_GPIO_Clock(port_index);
+    GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+    // Configure GPIO
+    GPIO_InitTypeDef GPIO_InitStructure;
+    GPIO_InitStructure.Pin       = (uint32_t)(1 << pin_index);
+    GPIO_InitStructure.Mode      = gpio_mode[mode];
+    GPIO_InitStructure.Pull      = pupd;
+    GPIO_InitStructure.Speed     = GPIO_SPEED_HIGH;
+    GPIO_InitStructure.Alternate = afnum;
+    HAL_GPIO_Init(gpio, &GPIO_InitStructure);
+
+    // [TODO] Disconnect JTAG-DP + SW-DP signals.
+    // Warning: Need to reconnect under reset
+    //if ((pin == PA_13) || (pin == PA_14)) {
+    //
+    //}
+    //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
+    //
+    //}
+}
+
+/**
+ * Configure pin pull-up/pull-down
+ */
+void pin_mode(PinName pin, PinMode mode)
+{
+    MBED_ASSERT(pin != (PinName)NC);
+    uint32_t port_index = STM_PORT(pin);
+    uint32_t pin_index  = STM_PIN(pin);
+
+    // Enable GPIO clock
+    uint32_t gpio_add = Set_GPIO_Clock(port_index);
+    GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+    // Configure pull-up/pull-down resistors
+    uint32_t pupd = (uint32_t)mode;
+    if (pupd > 2)
+        pupd = 0; // Open-drain = No pull-up/No pull-down
+    gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
+    gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
+
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/port_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "port_api.h"
+#include "pinmap.h"
+#include "gpio_api.h"
+#include "mbed_error.h"
+
+#if DEVICE_PORTIN || DEVICE_PORTOUT
+
+extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
+
+// high nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, ...)
+// low nibble  = pin number
+PinName port_pin(PortName port, int pin_n)
+{
+    return (PinName)(pin_n + (port << 4));
+}
+
+void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
+{
+    uint32_t port_index = (uint32_t)port;
+
+    // Enable GPIO clock
+    uint32_t gpio_add = Set_GPIO_Clock(port_index);
+    GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+    // Fill PORT object structure for future use
+    obj->port      = port;
+    obj->mask      = mask;
+    obj->direction = dir;
+    obj->reg_in    = &gpio->IDR;
+    obj->reg_out   = &gpio->ODR;
+
+    port_dir(obj, dir);
+}
+
+void port_dir(port_t *obj, PinDirection dir)
+{
+    uint32_t i;
+    obj->direction = dir;
+    for (i = 0; i < 16; i++) { // Process all pins
+        if (obj->mask & (1 << i)) { // If the pin is used
+            if (dir == PIN_OUTPUT) {
+                pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_OUTPUT_PP, GPIO_NOPULL, 0));
+            } else { // PIN_INPUT
+                pin_function(port_pin(obj->port, i), STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+            }
+        }
+    }
+}
+
+void port_mode(port_t *obj, PinMode mode)
+{
+    uint32_t i;
+    for (i = 0; i < 16; i++) { // Process all pins
+        if (obj->mask & (1 << i)) { // If the pin is used
+            pin_mode(port_pin(obj->port, i), mode);
+        }
+    }
+}
+
+void port_write(port_t *obj, int value)
+{
+    *obj->reg_out = (*obj->reg_out & ~obj->mask) | (value & obj->mask);
+}
+
+int port_read(port_t *obj)
+{
+    if (obj->direction == PIN_OUTPUT) {
+        return (*obj->reg_out & obj->mask);
+    } else { // PIN_INPUT
+        return (*obj->reg_in & obj->mask);
+    }
+}
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/pwmout_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,233 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "pwmout_api.h"
+
+#if DEVICE_PWMOUT
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+#include "PeripheralPins.h"
+
+static TIM_HandleTypeDef TimHandle;
+
+void pwmout_init(pwmout_t* obj, PinName pin)
+{
+    // Get the peripheral name from the pin and assign it to the object
+    obj->pwm = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
+    MBED_ASSERT(obj->pwm != (PWMName)NC);
+
+    // Get the functions (timer channel, (non)inverted) from the pin and assign it to the object
+    uint32_t function = pinmap_function(pin, PinMap_PWM);
+    MBED_ASSERT(function != (uint32_t)NC);
+    obj->channel = STM_PIN_CHANNEL(function);
+    obj->inverted = STM_PIN_INVERTED(function);
+
+    // Enable TIM clock
+    if (obj->pwm == PWM_1) __HAL_RCC_TIM1_CLK_ENABLE();
+    if (obj->pwm == PWM_2) __HAL_RCC_TIM2_CLK_ENABLE();
+    if (obj->pwm == PWM_3) __HAL_RCC_TIM3_CLK_ENABLE();
+    if (obj->pwm == PWM_4) __HAL_RCC_TIM4_CLK_ENABLE();
+    if (obj->pwm == PWM_8) __HAL_RCC_TIM8_CLK_ENABLE();
+    if (obj->pwm == PWM_9) __HAL_RCC_TIM9_CLK_ENABLE();
+    if (obj->pwm == PWM_10) __HAL_RCC_TIM10_CLK_ENABLE();
+    if (obj->pwm == PWM_11) __HAL_RCC_TIM11_CLK_ENABLE();
+    if (obj->pwm == PWM_12) __HAL_RCC_TIM12_CLK_ENABLE();
+    if (obj->pwm == PWM_13) __HAL_RCC_TIM13_CLK_ENABLE();
+    if (obj->pwm == PWM_14) __HAL_RCC_TIM14_CLK_ENABLE();
+
+    // Configure GPIO
+    pinmap_pinout(pin, PinMap_PWM);
+
+    obj->pin = pin;
+    obj->period = 0;
+    obj->pulse = 0;
+
+    pwmout_period_us(obj, 20000); // 20 ms per default
+}
+
+void pwmout_free(pwmout_t* obj)
+{
+    // Configure GPIO
+    pin_function(obj->pin, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+}
+
+void pwmout_write(pwmout_t* obj, float value)
+{
+    TIM_OC_InitTypeDef sConfig;
+    int channel = 0;
+
+    TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
+
+    if (value < (float)0.0) {
+        value = 0.0;
+    } else if (value > (float)1.0) {
+        value = 1.0;
+    }
+
+    obj->pulse = (uint32_t)((float)obj->period * value);
+
+    // Configure channels
+    sConfig.OCMode       = TIM_OCMODE_PWM1;
+    sConfig.Pulse        = obj->pulse;
+    sConfig.OCPolarity   = TIM_OCPOLARITY_HIGH;
+    sConfig.OCNPolarity  = TIM_OCNPOLARITY_HIGH;
+    sConfig.OCFastMode   = TIM_OCFAST_DISABLE;
+    sConfig.OCIdleState  = TIM_OCIDLESTATE_RESET;
+    sConfig.OCNIdleState = TIM_OCNIDLESTATE_RESET;
+
+    switch (obj->channel) {
+        case 1:
+            channel = TIM_CHANNEL_1;
+            break;
+        case 2:
+            channel = TIM_CHANNEL_2;
+            break;
+        case 3:
+            channel = TIM_CHANNEL_3;
+            break;
+        case 4:
+            channel = TIM_CHANNEL_4;
+            break;
+        default:
+            return;
+    }
+
+    if (HAL_TIM_PWM_ConfigChannel(&TimHandle, &sConfig, channel) != HAL_OK) {
+        error("Cannot configure PWM channel\n");
+    }
+
+    if (obj->inverted) {
+        HAL_TIMEx_PWMN_Start(&TimHandle, channel);
+    } else {
+        HAL_TIM_PWM_Start(&TimHandle, channel);
+    }
+}
+
+float pwmout_read(pwmout_t* obj)
+{
+    float value = 0;
+    if (obj->period > 0) {
+        value = (float)(obj->pulse) / (float)(obj->period);
+    }
+    return ((value > (float)1.0) ? (float)(1.0) : (value));
+}
+
+void pwmout_period(pwmout_t* obj, float seconds)
+{
+    pwmout_period_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_period_ms(pwmout_t* obj, int ms)
+{
+    pwmout_period_us(obj, ms * 1000);
+}
+
+void pwmout_period_us(pwmout_t* obj, int us)
+{
+    TimHandle.Instance = (TIM_TypeDef *)(obj->pwm);
+    RCC_ClkInitTypeDef RCC_ClkInitStruct;
+    uint32_t PclkFreq;
+    uint32_t APBxCLKDivider;
+    float dc = pwmout_read(obj);
+
+    __HAL_TIM_DISABLE(&TimHandle);
+
+    // Get clock configuration
+    // Note: PclkFreq contains here the Latency (not used after)
+    HAL_RCC_GetClockConfig(&RCC_ClkInitStruct, &PclkFreq);
+
+    // Get the PCLK and APBCLK divider related to the timer
+    switch (obj->pwm) {
+
+        // APB1 clock
+        case PWM_2:
+        case PWM_3:
+        case PWM_4:
+        case PWM_5:
+        case PWM_12:
+        case PWM_13:
+        case PWM_14:
+            PclkFreq = HAL_RCC_GetPCLK1Freq();
+            APBxCLKDivider = RCC_ClkInitStruct.APB1CLKDivider;
+            break;
+
+        // APB2 clock
+        case PWM_1:
+        case PWM_8:
+        case PWM_9:
+        case PWM_10:
+        case PWM_11:
+            PclkFreq = HAL_RCC_GetPCLK2Freq();
+            APBxCLKDivider = RCC_ClkInitStruct.APB2CLKDivider;
+            break;
+        default:
+            return;
+    }
+
+    TimHandle.Init.Period        = us - 1;
+    // TIMxCLK = PCLKx when the APB prescaler = 1 else TIMxCLK = 2 * PCLKx
+    if (APBxCLKDivider == RCC_HCLK_DIV1)
+      TimHandle.Init.Prescaler   = (uint16_t)((PclkFreq) / 1000000) - 1; // 1 µs tick
+    else
+      TimHandle.Init.Prescaler   = (uint16_t)((PclkFreq * 2) / 1000000) - 1; // 1 µs tick
+    TimHandle.Init.ClockDivision = 0;
+    TimHandle.Init.CounterMode   = TIM_COUNTERMODE_UP;
+
+    if (HAL_TIM_PWM_Init(&TimHandle) != HAL_OK) {
+        error("Cannot initialize PWM\n");
+    }
+
+    // Set duty cycle again
+    pwmout_write(obj, dc);
+
+    // Save for future use
+    obj->period = us;
+
+    __HAL_TIM_ENABLE(&TimHandle);
+}
+
+void pwmout_pulsewidth(pwmout_t* obj, float seconds)
+{
+    pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_pulsewidth_ms(pwmout_t* obj, int ms)
+{
+    pwmout_pulsewidth_us(obj, ms * 1000);
+}
+
+void pwmout_pulsewidth_us(pwmout_t* obj, int us)
+{
+    float value = (float)us / (float)obj->period;
+    pwmout_write(obj, value);
+}
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/rtc_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,222 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "rtc_api.h"
+
+#if DEVICE_RTC
+
+#include "mbed_error.h"
+
+#if DEVICE_RTC_LSI
+static int rtc_inited = 0;
+#endif
+
+static RTC_HandleTypeDef RtcHandle;
+
+void rtc_init(void)
+{
+    RCC_OscInitTypeDef RCC_OscInitStruct;
+    uint32_t rtc_freq = 0;
+
+    RtcHandle.Instance = RTC;
+
+#if !DEVICE_RTC_LSI
+    // Enable LSE Oscillator
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
+    RCC_OscInitStruct.PLL.PLLState   = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
+    RCC_OscInitStruct.LSEState       = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
+    RCC_OscInitStruct.LSIState       = RCC_LSI_OFF;
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) { // Check if LSE has started correctly
+        // Connect LSE to RTC
+        __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSE);
+        __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSE);
+        rtc_freq = LSE_VALUE;
+    } else {
+	    error("Cannot initialize RTC with LSE\n");
+    }
+#else	
+    // Enable Power clock
+    __PWR_CLK_ENABLE();
+
+    // Enable access to Backup domain
+    HAL_PWR_EnableBkUpAccess();
+
+    // Reset Backup domain
+    __HAL_RCC_BACKUPRESET_FORCE();
+    __HAL_RCC_BACKUPRESET_RELEASE();
+
+	// Enable LSI clock
+	RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
+	RCC_OscInitStruct.PLL.PLLState   = RCC_PLL_NONE; // Mandatory, otherwise the PLL is reconfigured!
+	RCC_OscInitStruct.LSEState       = RCC_LSE_OFF;
+	RCC_OscInitStruct.LSIState       = RCC_LSI_ON;
+	if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+		error("Cannot initialize RTC with LSI\n");
+	}
+	// Connect LSI to RTC
+    __HAL_RCC_RTC_CLKPRESCALER(RCC_RTCCLKSOURCE_LSI);
+    __HAL_RCC_RTC_CONFIG(RCC_RTCCLKSOURCE_LSI);
+	// This value is LSI typical value. To be measured precisely using a timer input capture for example.
+	rtc_freq = LSI_VALUE;
+#endif
+
+    // Enable RTC
+    __HAL_RCC_RTC_ENABLE();
+
+    RtcHandle.Init.HourFormat     = RTC_HOURFORMAT_24;
+    RtcHandle.Init.AsynchPrediv   = 127;
+    RtcHandle.Init.SynchPrediv    = (rtc_freq / 128) - 1;
+    RtcHandle.Init.OutPut         = RTC_OUTPUT_DISABLE;
+    RtcHandle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
+    RtcHandle.Init.OutPutType     = RTC_OUTPUT_TYPE_OPENDRAIN;
+
+    if (HAL_RTC_Init(&RtcHandle) != HAL_OK) {
+        error("RTC error: RTC initialization failed.");
+    }
+}
+
+void rtc_free(void)
+{
+#if DEVICE_RTC_LSI
+    // Enable Power clock
+    __PWR_CLK_ENABLE();
+
+    // Enable access to Backup domain
+    HAL_PWR_EnableBkUpAccess();
+
+    // Reset Backup domain
+    __HAL_RCC_BACKUPRESET_FORCE();
+    __HAL_RCC_BACKUPRESET_RELEASE();
+
+    // Disable access to Backup domain
+    HAL_PWR_DisableBkUpAccess();
+#endif
+
+    // Disable LSI and LSE clocks
+    RCC_OscInitTypeDef RCC_OscInitStruct;
+    RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_LSE;
+    RCC_OscInitStruct.PLL.PLLState   = RCC_PLL_NONE;
+    RCC_OscInitStruct.LSIState       = RCC_LSI_OFF;
+    RCC_OscInitStruct.LSEState       = RCC_LSE_OFF;
+    HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+#if DEVICE_RTC_LSI
+    rtc_inited = 0;
+#endif
+}
+
+int rtc_isenabled(void)
+{
+#if DEVICE_RTC_LSI
+  return rtc_inited;
+#else
+  if ((RTC->ISR & RTC_ISR_INITS) ==  RTC_ISR_INITS) {
+    return 1;
+  } else {
+    return 0;
+  }
+#endif
+}
+
+/*
+ RTC Registers
+   RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday
+   RTC_Month   1=january, 2=february, ..., 12=december
+   RTC_Date    day of the month 1-31
+   RTC_Year    year 0-99
+ struct tm
+   tm_sec      seconds after the minute 0-61
+   tm_min      minutes after the hour 0-59
+   tm_hour     hours since midnight 0-23
+   tm_mday     day of the month 1-31
+   tm_mon      months since January 0-11
+   tm_year     years since 1900
+   tm_wday     days since Sunday 0-6
+   tm_yday     days since January 1 0-365
+   tm_isdst    Daylight Saving Time flag
+*/
+time_t rtc_read(void)
+{
+    RTC_DateTypeDef dateStruct;
+    RTC_TimeTypeDef timeStruct;
+    struct tm timeinfo;
+
+    RtcHandle.Instance = RTC;
+
+    // Read actual date and time
+    // Warning: the time must be read first!
+    HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
+    HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
+
+    // Setup a tm structure based on the RTC
+    timeinfo.tm_wday = dateStruct.WeekDay;
+    timeinfo.tm_mon  = dateStruct.Month - 1;
+    timeinfo.tm_mday = dateStruct.Date;
+    timeinfo.tm_year = dateStruct.Year + 100;
+    timeinfo.tm_hour = timeStruct.Hours;
+    timeinfo.tm_min  = timeStruct.Minutes;
+    timeinfo.tm_sec  = timeStruct.Seconds;
+
+    // Convert to timestamp
+    time_t t = mktime(&timeinfo);
+
+    return t;
+}
+
+void rtc_write(time_t t)
+{
+    RTC_DateTypeDef dateStruct;
+    RTC_TimeTypeDef timeStruct;
+
+    RtcHandle.Instance = RTC;
+
+    // Enable write access to Backup domain
+    HAL_PWR_EnableBkUpAccess();
+
+    // Convert the time into a tm
+    struct tm *timeinfo = localtime(&t);
+
+    // Fill RTC structures
+    dateStruct.WeekDay        = timeinfo->tm_wday;
+    dateStruct.Month          = timeinfo->tm_mon + 1;
+    dateStruct.Date           = timeinfo->tm_mday;
+    dateStruct.Year           = timeinfo->tm_year - 100;
+    timeStruct.Hours          = timeinfo->tm_hour;
+    timeStruct.Minutes        = timeinfo->tm_min;
+    timeStruct.Seconds        = timeinfo->tm_sec;
+    timeStruct.TimeFormat     = RTC_HOURFORMAT12_PM;
+    timeStruct.DayLightSaving = RTC_DAYLIGHTSAVING_NONE;
+    timeStruct.StoreOperation = RTC_STOREOPERATION_RESET;
+
+    // Change the RTC current date/time
+    HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN);
+    HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN);
+}
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/serial_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,474 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "serial_api.h"
+
+#if DEVICE_SERIAL
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include <string.h>
+#include "PeripheralPins.h"
+#include "mbed_error.h"
+
+#define UART_NUM (8)
+
+static uint32_t serial_irq_ids[UART_NUM] = {0, 0, 0, 0, 0, 0, 0, 0};
+
+static uart_irq_handler irq_handler;
+
+UART_HandleTypeDef UartHandle;
+
+int stdio_uart_inited = 0;
+serial_t stdio_uart;
+
+static void init_uart(serial_t *obj)
+{
+    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+
+    UartHandle.Init.BaudRate   = obj->baudrate;
+    UartHandle.Init.WordLength = obj->databits;
+    UartHandle.Init.StopBits   = obj->stopbits;
+    UartHandle.Init.Parity     = obj->parity;
+    UartHandle.Init.HwFlowCtl  = UART_HWCONTROL_NONE;
+
+    if (obj->pin_rx == NC) {
+        UartHandle.Init.Mode = UART_MODE_TX;
+    } else if (obj->pin_tx == NC) {
+        UartHandle.Init.Mode = UART_MODE_RX;
+    } else {
+        UartHandle.Init.Mode = UART_MODE_TX_RX;
+    }
+
+    if (HAL_UART_Init(&UartHandle) != HAL_OK) {
+        error("Cannot initialize UART");
+    }
+}
+
+void serial_init(serial_t *obj, PinName tx, PinName rx)
+{
+    // Determine the UART to use (UART_1, UART_2, ...)
+    UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
+    UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
+
+    // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
+    obj->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
+    MBED_ASSERT(obj->uart != (UARTName)NC);
+
+    // Enable USART clock
+    switch (obj->uart) {
+        case UART_1:
+            __USART1_CLK_ENABLE();
+            obj->index = 0;
+            break;
+        case UART_2:
+            __USART2_CLK_ENABLE();
+            obj->index = 1;
+            break;
+#if defined(USART3_BASE)
+        case UART_3:
+            __USART3_CLK_ENABLE();
+            obj->index = 2;
+            break;
+#endif
+#if defined(UART4_BASE)
+        case UART_4:
+            __UART4_CLK_ENABLE();
+            obj->index = 3;
+            break;
+#endif
+#if defined(UART5_BASE)
+        case UART_5:
+            __UART5_CLK_ENABLE();
+            obj->index = 4;
+            break;
+#endif
+        case UART_6:
+            __USART6_CLK_ENABLE();
+            obj->index = 5;
+            break;
+#if defined(UART7_BASE)
+        case UART_7:
+            __UART7_CLK_ENABLE();
+            obj->index = 6;
+            break;
+#endif
+#if defined(UART8_BASE)
+        case UART_8:
+            __UART8_CLK_ENABLE();
+            obj->index = 7;
+            break;
+#endif
+    }
+
+    // Configure the UART pins
+    pinmap_pinout(tx, PinMap_UART_TX);
+    pinmap_pinout(rx, PinMap_UART_RX);
+    if (tx != NC) {
+        pin_mode(tx, PullUp);
+    }
+    if (rx != NC) {
+        pin_mode(rx, PullUp);
+    }
+
+    // Configure UART
+    obj->baudrate = 9600;
+    obj->databits = UART_WORDLENGTH_8B;
+    obj->stopbits = UART_STOPBITS_1;
+    obj->parity   = UART_PARITY_NONE;
+
+    obj->pin_tx = tx;
+    obj->pin_rx = rx;
+
+    init_uart(obj);
+
+    // For stdio management
+    if (obj->uart == STDIO_UART) {
+        stdio_uart_inited = 1;
+        memcpy(&stdio_uart, obj, sizeof(serial_t));
+    }
+}
+
+void serial_free(serial_t *obj)
+{
+    // Reset UART and disable clock
+    switch (obj->uart) {
+        case UART_1:
+            __USART1_FORCE_RESET();
+            __USART1_RELEASE_RESET();
+            __USART1_CLK_DISABLE();
+            break;
+        case UART_2:
+            __USART2_FORCE_RESET();
+            __USART2_RELEASE_RESET();
+            __USART2_CLK_DISABLE();
+            break;
+#if defined(USART3_BASE)
+        case UART_3:
+            __USART3_FORCE_RESET();
+            __USART3_RELEASE_RESET();
+            __USART3_CLK_DISABLE();
+            break;
+#endif
+#if defined(UART4_BASE)
+        case UART_4:
+            __UART4_FORCE_RESET();
+            __UART4_RELEASE_RESET();
+            __UART4_CLK_DISABLE();
+            break;
+#endif
+#if defined(UART5_BASE)
+        case UART_5:
+            __UART5_FORCE_RESET();
+            __UART5_RELEASE_RESET();
+            __UART5_CLK_DISABLE();
+            break;
+#endif
+        case UART_6:
+            __USART6_FORCE_RESET();
+            __USART6_RELEASE_RESET();
+            __USART6_CLK_DISABLE();
+            break;
+#if defined(UART7_BASE)
+        case UART_7:
+            __UART7_FORCE_RESET();
+            __UART7_RELEASE_RESET();
+            __UART7_CLK_DISABLE();
+            break;
+#endif
+#if defined(UART8_BASE)
+        case UART_8:
+            __UART8_FORCE_RESET();
+            __UART8_RELEASE_RESET();
+            __UART8_CLK_DISABLE();
+            break;
+#endif
+    }
+    // Configure GPIOs
+    pin_function(obj->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+    pin_function(obj->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+
+    serial_irq_ids[obj->index] = 0;
+}
+
+void serial_baud(serial_t *obj, int baudrate)
+{
+    obj->baudrate = baudrate;
+    init_uart(obj);
+}
+
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
+{
+    if (data_bits == 9) {
+        obj->databits = UART_WORDLENGTH_9B;
+    } else {
+        obj->databits = UART_WORDLENGTH_8B;
+    }
+
+    switch (parity) {
+        case ParityOdd:
+        case ParityForced0:
+            obj->parity = UART_PARITY_ODD;
+            break;
+        case ParityEven:
+        case ParityForced1:
+            obj->parity = UART_PARITY_EVEN;
+            break;
+        default: // ParityNone
+            obj->parity = UART_PARITY_NONE;
+            break;
+    }
+
+    if (stop_bits == 2) {
+        obj->stopbits = UART_STOPBITS_2;
+    } else {
+        obj->stopbits = UART_STOPBITS_1;
+    }
+
+    init_uart(obj);
+}
+
+/******************************************************************************
+ * INTERRUPTS HANDLING
+ ******************************************************************************/
+
+static void uart_irq(UARTName name, int id)
+{
+    UartHandle.Instance = (USART_TypeDef *)name;
+    if (serial_irq_ids[id] != 0) {
+        if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TC) != RESET) {
+            irq_handler(serial_irq_ids[id], TxIrq);
+            __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TC);
+        }
+        if (__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) {
+            irq_handler(serial_irq_ids[id], RxIrq);
+            __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_RXNE);
+        }
+    }
+}
+
+static void uart1_irq(void)
+{
+    uart_irq(UART_1, 0);
+}
+
+static void uart2_irq(void)
+{
+    uart_irq(UART_2, 1);
+}
+
+#if defined(USART3_BASE)
+static void uart3_irq(void)
+{
+    uart_irq(UART_3, 2);
+}
+#endif
+
+#if defined(UART4_BASE)
+static void uart4_irq(void)
+{
+    uart_irq(UART_4, 3);
+}
+#endif
+
+#if defined(UART5_BASE)
+static void uart5_irq(void)
+{
+    uart_irq(UART_5, 4);
+}
+#endif
+
+static void uart6_irq(void)
+{
+    uart_irq(UART_6, 5);
+}
+
+#if defined(UART7_BASE)
+static void uart7_irq(void)
+{
+    uart_irq(UART_7, 6);
+}
+#endif
+
+#if defined(UART8_BASE)
+static void uart8_irq(void)
+{
+    uart_irq(UART_8, 7);
+}
+#endif
+
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
+{
+    irq_handler = handler;
+    serial_irq_ids[obj->index] = id;
+}
+
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
+{
+    IRQn_Type irq_n = (IRQn_Type)0;
+    uint32_t vector = 0;
+
+    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+
+    switch (obj->uart) {
+        case UART_1:
+            irq_n = USART1_IRQn;
+            vector = (uint32_t)&uart1_irq;
+            break;
+
+        case UART_2:
+            irq_n = USART2_IRQn;
+            vector = (uint32_t)&uart2_irq;
+            break;
+#if defined(USART3_BASE)
+        case UART_3:
+            irq_n = USART3_IRQn;
+            vector = (uint32_t)&uart3_irq;
+            break;
+#endif
+#if defined(UART4_BASE)
+        case UART_4:
+            irq_n = UART4_IRQn;
+            vector = (uint32_t)&uart4_irq;
+            break;
+#endif
+#if defined(UART5_BASE)
+        case UART_5:
+            irq_n = UART5_IRQn;
+            vector = (uint32_t)&uart5_irq;
+            break;
+#endif
+        case UART_6:
+            irq_n = USART6_IRQn;
+            vector = (uint32_t)&uart6_irq;
+            break;
+#if defined(UART7_BASE)
+        case UART_7:
+            irq_n = UART7_IRQn;
+            vector = (uint32_t)&uart7_irq;
+            break;
+#endif
+#if defined(UART8_BASE)
+        case UART_8:
+            irq_n = UART8_IRQn;
+            vector = (uint32_t)&uart8_irq;
+            break;
+#endif
+    }
+
+    if (enable) {
+
+        if (irq == RxIrq) {
+            __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_RXNE);
+        } else { // TxIrq
+            __HAL_UART_ENABLE_IT(&UartHandle, UART_IT_TC);
+        }
+
+        NVIC_SetVector(irq_n, vector);
+        NVIC_EnableIRQ(irq_n);
+
+    } else { // disable
+
+        int all_disabled = 0;
+
+        if (irq == RxIrq) {
+            __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_RXNE);
+            // Check if TxIrq is disabled too
+            if ((UartHandle.Instance->CR1 & USART_CR1_TXEIE) == 0) all_disabled = 1;
+        } else { // TxIrq
+            __HAL_UART_DISABLE_IT(&UartHandle, UART_IT_TXE);
+            // Check if RxIrq is disabled too
+            if ((UartHandle.Instance->CR1 & USART_CR1_RXNEIE) == 0) all_disabled = 1;
+        }
+
+        if (all_disabled) NVIC_DisableIRQ(irq_n);
+
+    }
+}
+
+/******************************************************************************
+ * READ/WRITE
+ ******************************************************************************/
+
+int serial_getc(serial_t *obj)
+{
+    USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
+    while (!serial_readable(obj));
+    return (int)(uart->RDR & 0x1FF);
+}
+
+void serial_putc(serial_t *obj, int c)
+{
+    USART_TypeDef *uart = (USART_TypeDef *)(obj->uart);
+    while (!serial_writable(obj));
+    uart->TDR = (uint32_t)(c & 0x1FF);
+}
+
+int serial_readable(serial_t *obj)
+{
+    int status;
+    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+    // Check if data is received
+    status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_RXNE) != RESET) ? 1 : 0);
+    return status;
+}
+
+int serial_writable(serial_t *obj)
+{
+    int status;
+    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+    // Check if data is transmitted
+    status = ((__HAL_UART_GET_FLAG(&UartHandle, UART_FLAG_TXE) != RESET) ? 1 : 0);
+    return status;
+}
+
+void serial_clear(serial_t *obj)
+{
+    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+    __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_TXE);
+    __HAL_UART_CLEAR_IT(&UartHandle, UART_FLAG_RXNE);
+}
+
+void serial_pinout_tx(PinName tx)
+{
+    pinmap_pinout(tx, PinMap_UART_TX);
+}
+
+void serial_break_set(serial_t *obj)
+{
+    UartHandle.Instance = (USART_TypeDef *)(obj->uart);
+    HAL_LIN_SendBreak(&UartHandle);
+}
+
+void serial_break_clear(serial_t *obj)
+{
+}
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/sleep.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,61 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "sleep_api.h"
+
+#if DEVICE_SLEEP
+
+#include "cmsis.h"
+
+static TIM_HandleTypeDef TimMasterHandle;
+
+void sleep(void)
+{
+    TimMasterHandle.Instance = TIM5;
+
+    // Disable HAL tick interrupt
+    __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+
+    // Request to enter SLEEP mode
+    HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
+
+    // Enable HAL tick interrupt
+    __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2);
+}
+
+void deepsleep(void)
+{
+    // Request to enter STOP mode with regulator in low power mode
+    HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
+
+    // After wake-up from STOP need to reconfigure the system clock
+    SetSysClock();
+}
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/spi_api.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,368 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "mbed_assert.h"
+#include "spi_api.h"
+
+#if DEVICE_SPI
+
+#include <math.h>
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+#include "mbed_error.h"
+
+static SPI_HandleTypeDef SpiHandle;
+
+static void init_spi(spi_t *obj)
+{
+    SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+
+    __HAL_SPI_DISABLE(&SpiHandle);
+
+    SpiHandle.Init.Mode              = obj->mode;
+    SpiHandle.Init.BaudRatePrescaler = obj->br_presc;
+    SpiHandle.Init.Direction         = SPI_DIRECTION_2LINES;
+    SpiHandle.Init.CLKPhase          = obj->cpha;
+    SpiHandle.Init.CLKPolarity       = obj->cpol;
+    SpiHandle.Init.CRCCalculation    = SPI_CRCCALCULATION_DISABLED;
+    SpiHandle.Init.CRCPolynomial     = 7;
+    SpiHandle.Init.DataSize          = obj->bits;
+    SpiHandle.Init.FirstBit          = SPI_FIRSTBIT_MSB;
+    SpiHandle.Init.NSS               = obj->nss;
+    SpiHandle.Init.TIMode            = SPI_TIMODE_DISABLED;
+
+    if (HAL_SPI_Init(&SpiHandle) != HAL_OK) {
+        error("Cannot initialize SPI");
+    }
+
+    __HAL_SPI_ENABLE(&SpiHandle);
+}
+
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
+{
+    // Determine the SPI to use
+    SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
+    SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
+    SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
+    SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
+
+    SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
+    SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
+
+    obj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
+    MBED_ASSERT(obj->spi != (SPIName)NC);
+
+    // Enable SPI clock
+    if (obj->spi == SPI_1) {
+        __HAL_RCC_SPI1_CLK_ENABLE();
+    }
+
+    if (obj->spi == SPI_2) {
+        __HAL_RCC_SPI2_CLK_ENABLE();
+    }
+
+    if (obj->spi == SPI_3) {
+        __HAL_RCC_SPI3_CLK_ENABLE();
+    }
+
+    if (obj->spi == SPI_4) {
+        __HAL_RCC_SPI4_CLK_ENABLE();
+    }
+
+    if (obj->spi == SPI_5) {
+        __HAL_RCC_SPI5_CLK_ENABLE();
+    }
+
+    if (obj->spi == SPI_6) {
+        __HAL_RCC_SPI6_CLK_ENABLE();
+    }
+
+    // Configure the SPI pins
+    pinmap_pinout(mosi, PinMap_SPI_MOSI);
+    pinmap_pinout(miso, PinMap_SPI_MISO);
+    pinmap_pinout(sclk, PinMap_SPI_SCLK);
+
+    // Save new values
+    obj->bits = SPI_DATASIZE_8BIT;
+    obj->cpol = SPI_POLARITY_LOW;
+    obj->cpha = SPI_PHASE_1EDGE;
+    obj->br_presc = SPI_BAUDRATEPRESCALER_256;
+
+    obj->pin_miso = miso;
+    obj->pin_mosi = mosi;
+    obj->pin_sclk = sclk;
+    obj->pin_ssel = ssel;
+
+    if (ssel != NC) {
+        pinmap_pinout(ssel, PinMap_SPI_SSEL);
+    } else {
+        obj->nss = SPI_NSS_SOFT;
+    }
+
+    init_spi(obj);
+}
+
+void spi_free(spi_t *obj)
+{
+    // Reset SPI and disable clock
+    if (obj->spi == SPI_1) {
+        __HAL_RCC_SPI1_FORCE_RESET();
+        __HAL_RCC_SPI1_RELEASE_RESET();
+        __HAL_RCC_SPI1_CLK_DISABLE();
+    }
+
+    if (obj->spi == SPI_2) {
+        __HAL_RCC_SPI2_FORCE_RESET();
+        __HAL_RCC_SPI2_RELEASE_RESET();
+        __HAL_RCC_SPI2_CLK_DISABLE();
+    }
+
+    if (obj->spi == SPI_3) {
+        __HAL_RCC_SPI3_FORCE_RESET();
+        __HAL_RCC_SPI3_RELEASE_RESET();
+        __HAL_RCC_SPI3_CLK_DISABLE();
+    }
+    
+    if (obj->spi == SPI_4) {
+        __HAL_RCC_SPI4_FORCE_RESET();
+        __HAL_RCC_SPI4_RELEASE_RESET();
+        __HAL_RCC_SPI4_CLK_DISABLE();
+    }
+
+    if (obj->spi == SPI_5) {
+        __HAL_RCC_SPI5_FORCE_RESET();
+        __HAL_RCC_SPI5_RELEASE_RESET();
+        __HAL_RCC_SPI5_CLK_DISABLE();
+    }
+
+    if (obj->spi == SPI_6) {
+        __HAL_RCC_SPI6_FORCE_RESET();
+        __HAL_RCC_SPI6_RELEASE_RESET();
+        __HAL_RCC_SPI6_CLK_DISABLE();
+    }
+
+    // Configure GPIOs
+    pin_function(obj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+    pin_function(obj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+    pin_function(obj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+    pin_function(obj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
+}
+
+void spi_format(spi_t *obj, int bits, int mode, int slave)
+{
+    // Save new values
+    if (bits == 16) {
+        obj->bits = SPI_DATASIZE_16BIT;
+    } else {
+        obj->bits = SPI_DATASIZE_8BIT;
+    }
+
+    switch (mode) {
+        case 0:
+            obj->cpol = SPI_POLARITY_LOW;
+            obj->cpha = SPI_PHASE_1EDGE;
+            break;
+        case 1:
+            obj->cpol = SPI_POLARITY_LOW;
+            obj->cpha = SPI_PHASE_2EDGE;
+            break;
+        case 2:
+            obj->cpol = SPI_POLARITY_HIGH;
+            obj->cpha = SPI_PHASE_1EDGE;
+            break;
+        default:
+            obj->cpol = SPI_POLARITY_HIGH;
+            obj->cpha = SPI_PHASE_2EDGE;
+            break;
+    }
+
+    if (obj->nss != SPI_NSS_SOFT) {
+        obj->nss = (slave) ? SPI_NSS_HARD_INPUT : SPI_NSS_HARD_OUTPUT;
+    }
+
+    obj->mode = (slave) ? SPI_MODE_SLAVE : SPI_MODE_MASTER;
+
+    init_spi(obj);
+}
+
+void spi_frequency(spi_t *obj, int hz)
+{
+    // The frequencies are obtained with:
+    // - SPI2/SPI3 clock =  54 MHz (APB1 clock)
+    // - SPI1/SPI4/SPI5/SPI6 clocks = 108 MHz (APB2 clock)
+    switch(obj->spi) {
+      case SPI_1:
+      case SPI_4:
+      case SPI_5:
+      case SPI_6:
+                if (hz < 800000) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 422 kHz
+        } else if ((hz >= 800000) && (hz < 1000000)) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 844 kHz
+        } else if ((hz >= 1000000) && (hz < 3000000)) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 1.69 MHz
+        } else if ((hz >= 3000000) && (hz < 6000000)) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 3.38 MHz
+        } else if ((hz >= 6000000) && (hz < 12000000)) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 6.75 MHz
+        } else if ((hz >= 12000000) && (hz < 24000000)) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 13.5 MHz
+        } else if ((hz >= 24000000) && (hz < 54000000)) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 27 MHz
+        } else { // >= 54000000
+            obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 54 MHz
+        }
+        break;
+      case SPI_2:
+      case SPI_3:
+        if (hz < 400000) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_256; // 211 kHz
+        } else if ((hz >= 400000) && (hz < 800000)) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_128; // 422 kHz
+        } else if ((hz >= 800000) && (hz < 1000000)) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_64; // 844 kHz
+        } else if ((hz >= 1000000) && (hz < 3000000)) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_32; // 1.69 MHz
+        } else if ((hz >= 3000000) && (hz < 6000000)) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_16; // 3.38 MHz
+        } else if ((hz >= 6000000) && (hz < 12000000)) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_8; // 6.75 MHz
+        } else if ((hz >= 12000000) && (hz < 24000000)) {
+            obj->br_presc = SPI_BAUDRATEPRESCALER_4; // 13.5 MHz
+        } else { // >= 24000000
+            obj->br_presc = SPI_BAUDRATEPRESCALER_2; // 27 MHz
+        }
+        break;
+      default:
+        return;
+    }
+    
+    init_spi(obj);
+}
+
+static inline int ssp_readable(spi_t *obj)
+{
+    int status;
+    SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+    // Check if data is received
+    status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_RXNE) != RESET) ? 1 : 0);
+    return status;
+}
+
+static inline int ssp_writeable(spi_t *obj)
+{
+    int status;
+    SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+    // Check if data is transmitted
+    status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_TXE) != RESET) ? 1 : 0);
+    return status;
+}
+
+static inline void ssp_write(spi_t *obj, int value)
+{
+    SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+    while (!ssp_writeable(obj));
+    if (obj->bits == SPI_DATASIZE_8BIT) {
+        // Force 8-bit access to the data register
+        uint8_t *p_spi_dr = 0;
+        p_spi_dr = (uint8_t *) & (spi->DR);
+        *p_spi_dr = (uint8_t)value;
+    } else { // SPI_DATASIZE_16BIT
+        spi->DR = (uint16_t)value;
+    }
+}
+
+static inline int ssp_read(spi_t *obj)
+{
+    SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+    while (!ssp_readable(obj));
+    if (obj->bits == SPI_DATASIZE_8BIT) {
+        // Force 8-bit access to the data register
+        uint8_t *p_spi_dr = 0;
+        p_spi_dr = (uint8_t *) & (spi->DR);
+        return (int)(*p_spi_dr);
+    } else {
+        return (int)spi->DR;
+    }
+}
+
+static inline int ssp_busy(spi_t *obj)
+{
+    int status;
+    SpiHandle.Instance = (SPI_TypeDef *)(obj->spi);
+    status = ((__HAL_SPI_GET_FLAG(&SpiHandle, SPI_FLAG_BSY) != RESET) ? 1 : 0);
+    return status;
+}
+
+int spi_master_write(spi_t *obj, int value)
+{
+    ssp_write(obj, value);
+    return ssp_read(obj);
+}
+
+int spi_slave_receive(spi_t *obj)
+{
+    return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0);
+};
+
+int spi_slave_read(spi_t *obj)
+{
+    SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+    while (!ssp_readable(obj));
+    if (obj->bits == SPI_DATASIZE_8BIT) {
+        // Force 8-bit access to the data register
+        uint8_t *p_spi_dr = 0;
+        p_spi_dr = (uint8_t *) & (spi->DR);
+        return (int)(*p_spi_dr);
+    } else {
+        return (int)spi->DR;
+    }
+}
+
+void spi_slave_write(spi_t *obj, int value)
+{
+    SPI_TypeDef *spi = (SPI_TypeDef *)(obj->spi);
+    while (!ssp_writeable(obj));
+    if (obj->bits == SPI_DATASIZE_8BIT) {
+        // Force 8-bit access to the data register
+        uint8_t *p_spi_dr = 0;
+        p_spi_dr = (uint8_t *) & (spi->DR);
+        *p_spi_dr = (uint8_t)value;
+    } else { // SPI_DATASIZE_16BIT
+        spi->DR = (uint16_t)value;
+    }
+}
+
+int spi_busy(spi_t *obj)
+{
+    return ssp_busy(obj);
+}
+
+#endif

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_STM/TARGET_STM32F7/us_ticker.c	Tue Jun 04 21:51:46 2019 +0000
@@ -0,0 +1,70 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <stddef.h>
+#include "us_ticker_api.h"
+#include "PeripheralNames.h"
+#include "hal_tick.h"
+
+#define TIM_MST TIM5
+
+static TIM_HandleTypeDef TimMasterHandle;
+static int us_ticker_inited = 0;
+
+void us_ticker_init(void)
+{
+    if (us_ticker_inited) return;
+    us_ticker_inited = 1;
+
+    TimMasterHandle.Instance = TIM_MST;
+
+    HAL_InitTick(0); // The passed value is not used
+}
+
+uint32_t us_ticker_read()
+{
+    if (!us_ticker_inited) us_ticker_init();
+    return TIM_MST->CNT;
+}
+
+void us_ticker_set_interrupt(timestamp_t timestamp)
+{
+    // Set new output compare value
+    __HAL_TIM_SetCompare(&TimMasterHandle, TIM_CHANNEL_1, (uint32_t)timestamp);
+    // Enable IT
+    __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_disable_interrupt(void)
+{
+    __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC1);
+}
+
+void us_ticker_clear_interrupt(void)
+{
+    __HAL_TIM_CLEAR_IT(&TimMasterHandle, TIM_IT_CC1);
+}