Nam

Dependencies:   mbed

Dependents:   uSD LCD

Revision:
6:e1d9da7fe856
Child:
8:56384bddaba5
diff -r 5a395e126678 -r e1d9da7fe856 Drivers/BSP/STM32746G-Discovery/stm32746g_discovery_audio.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Drivers/BSP/STM32746G-Discovery/stm32746g_discovery_audio.h	Thu Nov 10 09:57:11 2016 +0100
@@ -0,0 +1,294 @@
+/**
+  ******************************************************************************
+  * @file    stm32746g_discovery_audio.h
+  * @author  MCD Application Team
+  * @version V1.1.1
+  * @date    02-June-2016
+  * @brief   This file contains the common defines and functions prototypes for
+  *          the stm32746g_discovery_audio.c driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32746G_DISCOVERY_AUDIO_H
+#define __STM32746G_DISCOVERY_AUDIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Includes ------------------------------------------------------------------*/
+/* Include audio component Driver */
+#include "../Components/wm8994/wm8994.h"
+#include "stm32746g_discovery.h"
+
+/** @addtogroup BSP
+  * @{
+  */ 
+
+/** @addtogroup STM32746G_DISCOVERY
+  * @{
+  */
+    
+/** @defgroup STM32746G_DISCOVERY_AUDIO STM32746G_DISCOVERY_AUDIO
+  * @{
+  */
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Exported_Types STM32746G_DISCOVERY_AUDIO Exported Types
+  * @{
+  */
+/**
+  * @}
+  */ 
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Exported_Constants STM32746G_DISCOVERY_AUDIO Exported Constants
+  * @{
+  */
+ 
+/*------------------------------------------------------------------------------
+                          USER SAI defines parameters
+ -----------------------------------------------------------------------------*/
+/*  CODEC_AudioFrame_SLOT_TDMMode 
+   In W8994 codec the Audio frame contains 4 slots : TDM Mode
+   TDM format :
+   +------------------|------------------|--------------------|-------------------+ 
+   | CODEC_SLOT0 Left | CODEC_SLOT1 Left | CODEC_SLOT0 Right  | CODEC_SLOT1 Right |
+   +------------------------------------------------------------------------------+
+  */
+/* To have 2 separate audio stream in Both headphone and speaker the 4 slot must be activated */
+#define CODEC_AUDIOFRAME_SLOT_0123           SAI_SLOTACTIVE_0 | SAI_SLOTACTIVE_1 | SAI_SLOTACTIVE_2 | SAI_SLOTACTIVE_3
+/* To have an audio stream in headphone only SAI Slot 0 and Slot 2 must be activated */ 
+#define CODEC_AUDIOFRAME_SLOT_02             SAI_SLOTACTIVE_0 | SAI_SLOTACTIVE_2
+/* To have an audio stream in speaker only SAI Slot 1 and Slot 3 must be activated */ 
+#define CODEC_AUDIOFRAME_SLOT_13             SAI_SLOTACTIVE_1 | SAI_SLOTACTIVE_3
+
+/* SAI OUT peripheral configuration defines */
+#define AUDIO_OUT_SAIx                           SAI2_Block_A
+#define AUDIO_OUT_SAIx_CLK_ENABLE()              __HAL_RCC_SAI2_CLK_ENABLE()
+#define AUDIO_OUT_SAIx_CLK_DISABLE()             __HAL_RCC_SAI2_CLK_DISABLE()
+#define AUDIO_OUT_SAIx_SCK_AF                    GPIO_AF10_SAI2
+#define AUDIO_OUT_SAIx_FS_SD_MCLK_AF             GPIO_AF10_SAI2
+
+#define AUDIO_OUT_SAIx_MCLK_ENABLE()             __HAL_RCC_GPIOI_CLK_ENABLE()
+#define AUDIO_OUT_SAIx_MCLK_GPIO_PORT            GPIOI
+#define AUDIO_OUT_SAIx_MCLK_PIN                  GPIO_PIN_4
+#define AUDIO_OUT_SAIx_SCK_SD_ENABLE()           __HAL_RCC_GPIOI_CLK_ENABLE()
+#define AUDIO_OUT_SAIx_SCK_SD_GPIO_PORT          GPIOI
+#define AUDIO_OUT_SAIx_SCK_PIN                   GPIO_PIN_5
+#define AUDIO_OUT_SAIx_SD_PIN                    GPIO_PIN_6
+#define AUDIO_OUT_SAIx_FS_ENABLE()               __HAL_RCC_GPIOI_CLK_ENABLE()
+#define AUDIO_OUT_SAIx_FS_GPIO_PORT              GPIOI
+#define AUDIO_OUT_SAIx_FS_PIN                    GPIO_PIN_7
+
+/* SAI DMA Stream definitions */
+#define AUDIO_OUT_SAIx_DMAx_CLK_ENABLE()         __HAL_RCC_DMA2_CLK_ENABLE()
+#define AUDIO_OUT_SAIx_DMAx_STREAM               DMA2_Stream4
+#define AUDIO_OUT_SAIx_DMAx_CHANNEL              DMA_CHANNEL_3
+#define AUDIO_OUT_SAIx_DMAx_IRQ                  DMA2_Stream4_IRQn
+#define AUDIO_OUT_SAIx_DMAx_PERIPH_DATA_SIZE     DMA_PDATAALIGN_HALFWORD
+#define AUDIO_OUT_SAIx_DMAx_MEM_DATA_SIZE        DMA_MDATAALIGN_HALFWORD
+#define DMA_MAX_SZE                              ((uint16_t)0xFFFF)
+   
+#define AUDIO_OUT_SAIx_DMAx_IRQHandler           DMA2_Stream4_IRQHandler
+
+/* Select the interrupt preemption priority for the DMA interrupt */
+#define AUDIO_OUT_IRQ_PREPRIO                    ((uint32_t)0x0E)   /* Select the preemption priority level(0 is the highest) */
+
+/*------------------------------------------------------------------------------
+                        AUDIO IN CONFIGURATION
+------------------------------------------------------------------------------*/
+/* SAI IN peripheral configuration defines */
+#define AUDIO_IN_SAIx                            SAI2_Block_B
+#define AUDIO_IN_SAIx_CLK_ENABLE()               __HAL_RCC_SAI2_CLK_ENABLE()
+#define AUDIO_IN_SAIx_CLK_DISABLE()              __HAL_RCC_SAI2_CLK_DISABLE()
+#define AUDIO_IN_SAIx_SD_AF                      GPIO_AF10_SAI2
+
+#define AUDIO_IN_SAIx_SD_ENABLE()                __HAL_RCC_GPIOG_CLK_ENABLE()
+#define AUDIO_IN_SAIx_SD_GPIO_PORT               GPIOG
+#define AUDIO_IN_SAIx_SD_PIN                     GPIO_PIN_10
+
+#define AUDIO_IN_INT_GPIO_ENABLE()               __HAL_RCC_GPIOH_CLK_ENABLE()
+#define AUDIO_IN_INT_GPIO_PORT                   GPIOH
+#define AUDIO_IN_INT_GPIO_PIN                    GPIO_PIN_15
+#define AUDIO_IN_INT_IRQ                         EXTI15_10_IRQn
+
+/* SAI DMA Stream definitions */
+#define AUDIO_IN_SAIx_DMAx_CLK_ENABLE()          __HAL_RCC_DMA2_CLK_ENABLE()
+#define AUDIO_IN_SAIx_DMAx_STREAM                DMA2_Stream7
+#define AUDIO_IN_SAIx_DMAx_CHANNEL               DMA_CHANNEL_0
+#define AUDIO_IN_SAIx_DMAx_IRQ                   DMA2_Stream7_IRQn
+#define AUDIO_IN_SAIx_DMAx_PERIPH_DATA_SIZE      DMA_PDATAALIGN_HALFWORD
+#define AUDIO_IN_SAIx_DMAx_MEM_DATA_SIZE         DMA_MDATAALIGN_HALFWORD
+
+#define AUDIO_IN_SAIx_DMAx_IRQHandler            DMA2_Stream7_IRQHandler
+#define AUDIO_IN_INT_IRQHandler                  EXTI15_10_IRQHandler
+
+/* Select the interrupt preemption priority and subpriority for the IT/DMA interrupt */
+#define AUDIO_IN_IRQ_PREPRIO                     ((uint32_t)0x0F)   /* Select the preemption priority level(0 is the highest) */
+
+/*------------------------------------------------------------------------------
+             CONFIGURATION: Audio Driver Configuration parameters
+------------------------------------------------------------------------------*/
+
+#define AUDIODATA_SIZE                      ((uint16_t)2)   /* 16-bits audio data size */
+
+/* Audio status definition */     
+#define AUDIO_OK                            ((uint8_t)0)
+#define AUDIO_ERROR                         ((uint8_t)1)
+#define AUDIO_TIMEOUT                       ((uint8_t)2)
+
+/* AudioFreq * DataSize (2 bytes) * NumChannels (Stereo: 2) */
+#define DEFAULT_AUDIO_IN_FREQ               I2S_AUDIOFREQ_16K
+#define DEFAULT_AUDIO_IN_BIT_RESOLUTION     ((uint8_t)16)
+#define DEFAULT_AUDIO_IN_CHANNEL_NBR        ((uint8_t)2) /* Mono = 1, Stereo = 2 */
+#define DEFAULT_AUDIO_IN_VOLUME             ((uint16_t)64)
+
+/*------------------------------------------------------------------------------
+                    OPTIONAL Configuration defines parameters
+------------------------------------------------------------------------------*/
+
+/* Delay for the Codec to be correctly reset */
+#define CODEC_RESET_DELAY                   ((uint8_t)5)
+   
+
+/*------------------------------------------------------------------------------
+                            OUTPUT DEVICES definition
+------------------------------------------------------------------------------*/
+/* Alias on existing output devices to adapt for 2 headphones output */
+#define OUTPUT_DEVICE_HEADPHONE1 OUTPUT_DEVICE_HEADPHONE
+#define OUTPUT_DEVICE_HEADPHONE2 OUTPUT_DEVICE_SPEAKER /* Headphone2 is connected to Speaker output of the wm8994 */
+   
+/**
+  * @}
+  */
+ 
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Exported_Variables STM32746G_DISCOVERY_AUDIO Exported Variables
+  * @{
+  */
+extern __IO uint16_t AudioInVolume;
+ /**
+  * @}
+  */
+   
+/** @defgroup STM32746G_DISCOVERY_AUDIO_Exported_Macros STM32746G_DISCOVERY_AUDIO Exported Macros
+  * @{
+  */
+#define DMA_MAX(x)           (((x) <= DMA_MAX_SZE)? (x):DMA_MAX_SZE)
+/**
+  * @}
+  */ 
+
+/** @addtogroup STM32746G_DISCOVERY_AUDIO_OUT_Exported_Functions
+  * @{
+  */
+uint8_t BSP_AUDIO_OUT_Init(uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq);
+uint8_t BSP_AUDIO_OUT_Play(uint16_t* pBuffer, uint32_t Size);
+void    BSP_AUDIO_OUT_ChangeBuffer(uint16_t *pData, uint16_t Size);
+uint8_t BSP_AUDIO_OUT_Pause(void);
+uint8_t BSP_AUDIO_OUT_Resume(void);
+uint8_t BSP_AUDIO_OUT_Stop(uint32_t Option);
+uint8_t BSP_AUDIO_OUT_SetVolume(uint8_t Volume);
+void    BSP_AUDIO_OUT_SetFrequency(uint32_t AudioFreq);
+void    BSP_AUDIO_OUT_SetAudioFrameSlot(uint32_t AudioFrameSlot);
+uint8_t BSP_AUDIO_OUT_SetMute(uint32_t Cmd);
+uint8_t BSP_AUDIO_OUT_SetOutputMode(uint8_t Output);
+void    BSP_AUDIO_OUT_DeInit(void);
+
+/* User Callbacks: user has to implement these functions in his code if they are needed. */
+/* This function is called when the requested data has been completely transferred.*/
+void    BSP_AUDIO_OUT_TransferComplete_CallBack(void);
+
+/* This function is called when half of the requested buffer has been transferred. */
+void    BSP_AUDIO_OUT_HalfTransfer_CallBack(void);
+
+/* This function is called when an Interrupt due to transfer error on or peripheral
+   error occurs. */
+void    BSP_AUDIO_OUT_Error_CallBack(void);
+
+/* These function can be modified in case the current settings (e.g. DMA stream)
+   need to be changed for specific application needs */
+void  BSP_AUDIO_OUT_ClockConfig(SAI_HandleTypeDef *hsai, uint32_t AudioFreq, void *Params);
+void  BSP_AUDIO_OUT_MspInit(SAI_HandleTypeDef *hsai, void *Params);
+void  BSP_AUDIO_OUT_MspDeInit(SAI_HandleTypeDef *hsai, void *Params);
+
+/**
+  * @}
+  */ 
+
+/** @defgroup STM32746G_DISCOVERY_AUDIO_IN_Exported_Functions STM32746G_DISCOVERY_AUDIO_IN Exported Functions
+  * @{
+  */
+uint8_t BSP_AUDIO_IN_Init(uint16_t InputDevice, uint8_t Volume, uint32_t AudioFreq);
+uint8_t BSP_AUDIO_IN_OUT_Init(uint16_t InputDevice, uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq);
+uint8_t BSP_AUDIO_IN_Record(uint16_t *pData, uint32_t Size);
+uint8_t BSP_AUDIO_IN_Stop(uint32_t Option);
+uint8_t BSP_AUDIO_IN_Pause(void);
+uint8_t BSP_AUDIO_IN_Resume(void);
+uint8_t BSP_AUDIO_IN_SetVolume(uint8_t Volume);
+void    BSP_AUDIO_IN_DeInit(void);
+/* User Callbacks: user has to implement these functions in his code if they are needed. */
+/* This function should be implemented by the user application.
+   It is called into this driver when the current buffer is filled to prepare the next
+   buffer pointer and its size. */
+void    BSP_AUDIO_IN_TransferComplete_CallBack(void);
+void    BSP_AUDIO_IN_HalfTransfer_CallBack(void);
+
+/* This function is called when an Interrupt due to transfer error on or peripheral
+   error occurs. */
+void    BSP_AUDIO_IN_Error_CallBack(void);
+
+/* These function can be modified in case the current settings (e.g. DMA stream)
+   need to be changed for specific application needs */
+void  BSP_AUDIO_IN_MspInit(SAI_HandleTypeDef *hsai, void *Params);
+void  BSP_AUDIO_IN_MspDeInit(SAI_HandleTypeDef *hsai, void *Params);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32746G_DISCOVERY_AUDIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/