Srinivas Nistala
TELNET TO UART using STM32F103C8 generic board and ENC28J60. It is a very initial version with just for test program. Uses UIPEthernet Library courtesy of Zoltan hudak and Norbert Truchsess. Thanks
Dependencies: UIPEthernet mbed-STM32F103C8T6 mbed Adafruit_GFX
Fork of
WebSwitch_ENC28J60
by 
Zoltan Hudak
History
In this version OLED display has been added to display IP address assigned via DHCP
2016-12-05, by neutron_striker [Mon, 05 Dec 2016 18:30:59 +0000] rev 8
In this version OLED display has been added to display IP address assigned via DHCP
Initial Commit of TELNET TO UART Test
2016-12-01, by neutron_striker [Thu, 01 Dec 2016 11:42:27 +0000] rev 7
Initial Commit of TELNET TO UART Test
Wrong SPI pin assignment fixed. Added support for STM32F103C8T6 boards.
2016-08-28, by hudakz [Sun, 28 Aug 2016 11:47:29 +0000] rev 6
Wrong SPI pin assignment fixed. Added support for STM32F103C8T6 boards.
Updated
2015-03-16, by hudakz [Mon, 16 Mar 2015 09:43:13 +0000] rev 5
Updated
Rev 02
2015-02-04, by hudakz [Wed, 04 Feb 2015 19:27:26 +0000] rev 4
Rev 02
Updated to work with the UIPEthernet library rev. 02.
2014-12-20, by hudakz [Sat, 20 Dec 2014 11:23:20 +0000] rev 3
Updated to work with the UIPEthernet library rev. 02.
header modified
2014-09-27, by hudakz [Sat, 27 Sep 2014 09:18:53 +0000] rev 2
header modified
rev. 01
2014-09-15, by hudakz [Mon, 15 Sep 2014 13:35:22 +0000] rev 1
rev. 01
rev. 00
2014-09-15, by hudakz [Mon, 15 Sep 2014 11:17:50 +0000] rev 0
rev. 00