Navigators AAT / Mbed OS AAT_LWM2M_K64F_demo

Updated ref

Dependencies:   FXOS8700Q-driver MODSERIAL

Fork of AAT_LWM2M_K64F by Vinay Shrivastav

README.md@21:b88cdeb5b302, 2016-10-21 (annotated)

Committer:
mbed_official
Date:
Fri Oct 21 09:30:10 2016 +0100
Revision:
21:b88cdeb5b302
Parent:
13:c44e318674db
Child:
22:e39e09d79a63
Merge branch 'oob_change'





Commit copied from https://github.com/ARMmbed/mbed-os-example-client

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Yogesh Pande 0:7d5ec759888b 1 # Getting started with mbed Client on mbed OS
Yogesh Pande 0:7d5ec759888b 2
Yogesh Pande 0:7d5ec759888b 3 This is the mbed Client example for mbed OS (we also have one for [Linux](https://github.com/ARMmbed/mbed-client-linux-example)). It demonstrates how to register a device with mbed Device Connector, how to read and write values, and how to deregister. If you are unfamiliar with mbed Device Connector, we recommend that you read [the introduction to the data model](https://docs.mbed.com/docs/mbed-device-connector-web-interfaces/en/latest/#the-mbed-device-connector-data-model) first.
Yogesh Pande 0:7d5ec759888b 4
Yogesh Pande 0:7d5ec759888b 5 The application:
Yogesh Pande 0:7d5ec759888b 6
Yogesh Pande 0:7d5ec759888b 7 * Connects to network with WiFi, Ethernet, 6LoWPAN ND or Thread connection.
Yogesh Pande 0:7d5ec759888b 8 * Registers with mbed Device Connector.
Yogesh Pande 0:7d5ec759888b 9 * Gives mbed Device Connector access to its resources (read and write).
Yogesh Pande 0:7d5ec759888b 10 * Records the number of clicks on the device’s button and sends the number to mbed Device Connector.
Yogesh Pande 0:7d5ec759888b 11 * Lets you control the blink pattern of the LED on the device (through mbed Device Connector).
Yogesh Pande 0:7d5ec759888b 12
Yogesh Pande 0:7d5ec759888b 13 ## Required hardware
Yogesh Pande 0:7d5ec759888b 14
Yogesh Pande 0:7d5ec759888b 15 * [FRDM-K64F](http://developer.mbed.org/platforms/frdm-k64f/) board.
Yogesh Pande 0:7d5ec759888b 16 * 1-2 micro-USB cables.
Yogesh Pande 0:7d5ec759888b 17 * [mbed 6LoWPAN gateway router](https://firefly-iot.com/product/firefly-6lowpan-gateway-2-4ghz/) for 6LoWPAN ND and Thread.
Yogesh Pande 0:7d5ec759888b 18 * mbed 6LoWPAN shield (AT86RF212B/[AT86RF233](https://firefly-iot.com/product/firefly-arduino-shield-2-4ghz/)) for 6LoWPAN ND and Thread.
Yogesh Pande 0:7d5ec759888b 19 * Ethernet cable and connection to the internet.
Yogesh Pande 0:7d5ec759888b 20
mbed_official 21:b88cdeb5b302 21 ## Requirements for non-K64F boards
mbed_official 21:b88cdeb5b302 22
mbed_official 21:b88cdeb5b302 23 * This example requires TLS functionality to be enabled on mbed TLS.
mbed_official 21:b88cdeb5b302 24 On devices where hardware entropy is not present, TLS is disabled by default.
mbed_official 21:b88cdeb5b302 25 This would result in compile time failures or linking failures.
mbed_official 7:9a1ee269650b 26
mbed_official 21:b88cdeb5b302 27 To learn why entropy is required, read the
mbed_official 21:b88cdeb5b302 28 [TLS Porting guide](https://docs.mbed.com/docs/mbed-os-handbook/en/5.2/advanced/tls_porting/).
mbed_official 21:b88cdeb5b302 29
mbed_official 21:b88cdeb5b302 30 * On non-K64F boards, there is no unregistration functionality and
mbed_official 21:b88cdeb5b302 31 button presses are simulated through timer ticks incrementing every 15 seconds.
mbed_official 7:9a1ee269650b 32
Yogesh Pande 0:7d5ec759888b 33 ## Required software
Yogesh Pande 0:7d5ec759888b 34
Yogesh Pande 0:7d5ec759888b 35 * [ARM mbed account](https://developer.mbed.org/account/login/?next=/).
Yogesh Pande 0:7d5ec759888b 36 * [mbed-cli](https://github.com/ARMmbed/mbed-cli) - to build the example programs. To learn how to build mbed OS applications with mbed-cli, see [the user guide](https://github.com/ARMmbed/mbed-cli/blob/master/README.md).
Yogesh Pande 0:7d5ec759888b 37 * [Serial port monitor](https://developer.mbed.org/handbook/SerialPC#host-interface-and-terminal-applications).
Yogesh Pande 0:7d5ec759888b 38
Yogesh Pande 0:7d5ec759888b 39 ## Application setup
Yogesh Pande 0:7d5ec759888b 40
mbed_official 21:b88cdeb5b302 41 To configure the example application:
Yogesh Pande 0:7d5ec759888b 42
Yogesh Pande 0:7d5ec759888b 43 1. [Select the connection type](#connection-type).
Yogesh Pande 0:7d5ec759888b 44 1. [Set the client credentials](#client-credentials).
Yogesh Pande 0:7d5ec759888b 45 1. [Change 6LoWPAN ND & Thread settings](#6lowpan-nd-and-thread-settings).
Yogesh Pande 0:7d5ec759888b 46 1. [Change Ethernet settings](#ethernet-settings).
Yogesh Pande 0:7d5ec759888b 47 1. [Change Wi-Fi settings](#wi-fi-settings).
Yogesh Pande 0:7d5ec759888b 48 1. [Set up an IP address](#ip-address-setup). This step is optional.
Yogesh Pande 0:7d5ec759888b 49 1. [Change the socket type](#changing-socket-type). This step is optional.
Yogesh Pande 0:7d5ec759888b 50
Yogesh Pande 0:7d5ec759888b 51 ### Connection type
Yogesh Pande 0:7d5ec759888b 52
Yogesh Pande 0:7d5ec759888b 53 The application uses Ethernet as the default connection type. To change the connection type, set one of them in `mbed_app.json`. For example, to enable 6LoWPAN ND mode:
Yogesh Pande 0:7d5ec759888b 54
Yogesh Pande 0:7d5ec759888b 55 ```json
Yogesh Pande 0:7d5ec759888b 56 "network-interface": {
Yogesh Pande 0:7d5ec759888b 57 "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD.",
Yogesh Pande 0:7d5ec759888b 58 "value": "MESH_LOWPAN_ND"
Yogesh Pande 0:7d5ec759888b 59 }
Yogesh Pande 0:7d5ec759888b 60 ```
Yogesh Pande 0:7d5ec759888b 61
Yogesh Pande 0:7d5ec759888b 62 ### Client credentials
Yogesh Pande 0:7d5ec759888b 63
mbed_official 21:b88cdeb5b302 64 To register the application with the Connector service, you need to create and set the client side certificate.
Yogesh Pande 0:7d5ec759888b 65
Yogesh Pande 0:7d5ec759888b 66 1. Go to [mbed Device Connector](https://connector.mbed.com) and log in with your mbed account.
mbed_official 21:b88cdeb5b302 67 1. On mbed Device Connector, go to [My Devices > Security credentials](https://connector.mbed.com/#credentials) and click the **Get my device security credentials** to get new credentials for your device.
mbed_official 21:b88cdeb5b302 68 1. Replace the contents in the `security.h` file of this project's directory with the content copied above.
Yogesh Pande 0:7d5ec759888b 69
Yogesh Pande 0:7d5ec759888b 70 ### 6LoWPAN ND and Thread settings
Yogesh Pande 0:7d5ec759888b 71
mbed_official 21:b88cdeb5b302 72 First, you need to select the RF driver to be used by the 6LoWPAN/Thread stack. This example supports [AT86RF233/212B](https://github.com/ARMmbed/atmel-rf-driver) and [NXP-MCR20a](https://github.com/ARMmbed/mcr20a-rf-driver) radio shields.
Yogesh Pande 1:e06e899acba6 73
mbed_official 21:b88cdeb5b302 74 To add the Atmel driver to you application from command line, call: `mbed add https://github.com/ARMmbed/atmel-rf-driver`.
mbed_official 21:b88cdeb5b302 75 Please make sure that the `mbed_app.json` file points to the correct radio driver type:
Yogesh Pande 1:e06e899acba6 76
mbed_official 21:b88cdeb5b302 77 ```json
mbed_official 21:b88cdeb5b302 78 "mesh_radio_type": {
mbed_official 21:b88cdeb5b302 79 "help": "options are ATMEL, MCR20",
mbed_official 21:b88cdeb5b302 80 "value": "ATMEL"
mbed_official 21:b88cdeb5b302 81 },
mbed_official 21:b88cdeb5b302 82 ```
Yogesh Pande 1:e06e899acba6 83
mbed_official 21:b88cdeb5b302 84 Then you need to enable ARM IPv6/6LoWPAN stack. Edit the `mbed_app.json` file to add `NANOSTACK` feature with the particular configuration of the stack:
Yogesh Pande 1:e06e899acba6 85
Yogesh Pande 1:e06e899acba6 86 ```
mbed_official 21:b88cdeb5b302 87 "target.features_add": ["NANOSTACK", "LOWPAN_ROUTER", "COMMON_PAL"],
mbed_official 21:b88cdeb5b302 88 ```
mbed_official 21:b88cdeb5b302 89
mbed_official 21:b88cdeb5b302 90 If your connection type is `MESH_THREAD` then you may want to use the THREAD_ROUTER configuration:
mbed_official 21:b88cdeb5b302 91
mbed_official 21:b88cdeb5b302 92 ```
mbed_official 21:b88cdeb5b302 93 "target.features_add": ["NANOSTACK", "THREAD_ROUTER", "COMMON_PAL"],
Yogesh Pande 1:e06e899acba6 94 ```
Yogesh Pande 1:e06e899acba6 95
Yogesh Pande 0:7d5ec759888b 96 6LoWPAN ND and Thread use IPv6 for connectivity. Therefore, you need to verify first that you have a working IPv6 connection. To do that, ping the Connector IPv6 address `2607:f0d0:2601:52::20` from your network.
Yogesh Pande 0:7d5ec759888b 97
mbed_official 21:b88cdeb5b302 98 <span class="notes">**Note:** If you are using the [k64f-border-router](https://github.com/ARMmbed/k64f-border-router) (that can be used only as a 6LoWPAN BR and only with FRDM-K64F), you need to enable another security feature. By default, the `k64f-border-router` uses `PSK` as security.</span>
mbed_official 21:b88cdeb5b302 99
mbed_official 21:b88cdeb5b302 100 You can enable the security here on your mbed-os-example-client application, for example:
mbed_official 6:8fff223f3f84 101
mbed_official 6:8fff223f3f84 102 ```json
mbed_official 6:8fff223f3f84 103 "target_overrides": {
mbed_official 6:8fff223f3f84 104 "*": {
mbed_official 6:8fff223f3f84 105 "mbed-mesh-api.6lowpan-nd-security-mode": "PSK",
mbed_official 6:8fff223f3f84 106 }
mbed_official 6:8fff223f3f84 107 }
mbed_official 6:8fff223f3f84 108 ```
mbed_official 21:b88cdeb5b302 109
mbed_official 21:b88cdeb5b302 110 Alternatively, you can remove the link layer security from the `k64f-border-router`. To do that, change the [mbed_app.json](https://github.com/ARMmbed/k64f-border-router/blob/master/mbed_app.json) fetched from the `k64f-border-router` repository, for example:
mbed_official 6:8fff223f3f84 111
mbed_official 6:8fff223f3f84 112 ```json
mbed_official 6:8fff223f3f84 113 "config": {
mbed_official 6:8fff223f3f84 114 "security-mode": "NONE",
mbed_official 6:8fff223f3f84 115 }
mbed_official 6:8fff223f3f84 116 ```
mbed_official 21:b88cdeb5b302 117
Yogesh Pande 0:7d5ec759888b 118 #### mbed gateway
Yogesh Pande 0:7d5ec759888b 119
Yogesh Pande 0:7d5ec759888b 120 To connect the example application in 6LoWPAN ND or Thread mode to Connector, you need to set up an mbed 6LoWPAN gateway router as follows:
Yogesh Pande 0:7d5ec759888b 121
Yogesh Pande 0:7d5ec759888b 122 1. Use an Ethernet cable to connect the mbed 6LoWPAN gateway router to the internet.
Yogesh Pande 0:7d5ec759888b 123 2. Use a micro-USB cable to connect the mbed 6LoWPAN gateway router to your computer. The computer will list the router as removable storage.
Yogesh Pande 0:7d5ec759888b 124 3. The firmware for the gateway is located in the `GW_Binary` folder in the root of this example. Select the binary matching your application bootstrap mode:
Yogesh Pande 0:7d5ec759888b 125
Yogesh Pande 0:7d5ec759888b 126 * For the **6LoWPAN ND** bootstrap, use `gateway6LoWPANDynamic.bin`.
Yogesh Pande 0:7d5ec759888b 127 * For the **Thread** bootstrap, use `gatewayThreadDynamic.bin`.
Yogesh Pande 0:7d5ec759888b 128
Yogesh Pande 0:7d5ec759888b 129 The dynamic binaries use IPv6 autoconfiguration and enable the client to connect to the Connector service. The static binaries create a site-local IPv6 network and packets cannot be routed outside.
Yogesh Pande 0:7d5ec759888b 130
Yogesh Pande 0:7d5ec759888b 131 4. Copy the gateway binary file to the mbed 6LoWPAN gateway router to flash the device. The device reboots automatically after flashing. If that does not happen, press the **Reset** button on the board.
Yogesh Pande 0:7d5ec759888b 132
Yogesh Pande 0:7d5ec759888b 133 You can view debug traces from the gateway with a serial port monitor. The gateway uses baud rate 460800. The gateway IPv6 address is correctly configured when the following trace is visible: `Eth bootstrap ready, IP=XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX`.
Yogesh Pande 0:7d5ec759888b 134
Yogesh Pande 0:7d5ec759888b 135 #### Channel settings
Yogesh Pande 0:7d5ec759888b 136
Yogesh Pande 0:7d5ec759888b 137 The default 2.4GHz channel settings are already defined by the [mbed-mesh-api](https://github.com/ARMmbed/mbed-mesh-api) to match the mbed gateway settings. The application can override these settings by adding them to the `mbed_app.json` file in the main project directory. For example:
Yogesh Pande 0:7d5ec759888b 138
Yogesh Pande 0:7d5ec759888b 139 ```json
Yogesh Pande 0:7d5ec759888b 140 "target_overrides": {
Yogesh Pande 0:7d5ec759888b 141 "*": {
Yogesh Pande 0:7d5ec759888b 142 "mbed-mesh-api.6lowpan-nd-channel-page": 0,
Yogesh Pande 0:7d5ec759888b 143 "mbed-mesh-api.6lowpan-nd-channel": 12,
Yogesh Pande 0:7d5ec759888b 144 "mbed-mesh-api.thread-config-channel-page": 0,
Yogesh Pande 0:7d5ec759888b 145 "mbed-mesh-api.thread-config-channel": 12
Yogesh Pande 0:7d5ec759888b 146 }
Yogesh Pande 0:7d5ec759888b 147 }
Yogesh Pande 0:7d5ec759888b 148 ```
Yogesh Pande 0:7d5ec759888b 149
Yogesh Pande 0:7d5ec759888b 150 For sub-GHz shields (AT86RF212B) use the following overrides, **6LoWPAN ND only**:
Yogesh Pande 0:7d5ec759888b 151
Yogesh Pande 0:7d5ec759888b 152 ```json
Yogesh Pande 0:7d5ec759888b 153 "mbed-mesh-api.6lowpan-nd-channel-page": 2,
Yogesh Pande 0:7d5ec759888b 154 "mbed-mesh-api.6lowpan-nd-channel": 1
Yogesh Pande 0:7d5ec759888b 155 ```
Yogesh Pande 0:7d5ec759888b 156
mbed_official 21:b88cdeb5b302 157 For more information about the radio shields, see [the related documentation](docs/radio_module_identify.md). All configurable settings can be found in the `mbed-os-example-client/mbed-os/features/FEATURE_IPV6/mbed-mesh-api/mbed_lib.json` file.
Yogesh Pande 0:7d5ec759888b 158
Yogesh Pande 0:7d5ec759888b 159 #### Thread-specific settings
Yogesh Pande 0:7d5ec759888b 160
Yogesh Pande 0:7d5ec759888b 161 With Thread, you can change the operating mode of the client from the default router mode to a sleepy end device by adding the following override to the `mbed_app.json` file:
Yogesh Pande 0:7d5ec759888b 162
Yogesh Pande 0:7d5ec759888b 163 ```json
Yogesh Pande 0:7d5ec759888b 164 "mbed-mesh-api.thread-device-type": "MESH_DEVICE_TYPE_THREAD_SLEEPY_END_DEVICE"
Yogesh Pande 0:7d5ec759888b 165 ```
Yogesh Pande 0:7d5ec759888b 166
Yogesh Pande 0:7d5ec759888b 167 ### Ethernet settings
Yogesh Pande 0:7d5ec759888b 168
Yogesh Pande 0:7d5ec759888b 169 For running the example application using Ethernet, you need:
Yogesh Pande 0:7d5ec759888b 170
Yogesh Pande 0:7d5ec759888b 171 - An Ethernet cable.
Yogesh Pande 0:7d5ec759888b 172 - An Ethernet connection to the internet.
Yogesh Pande 0:7d5ec759888b 173
Yogesh Pande 0:7d5ec759888b 174 ### Wi-Fi settings
Yogesh Pande 0:7d5ec759888b 175
Yogesh Pande 0:7d5ec759888b 176 The example application uses ESP8266 WiFi Interface for managing the wireless connectivity. To run this application using WiFi, you need:
Yogesh Pande 0:7d5ec759888b 177
mbed_official 21:b88cdeb5b302 178 1. An [ESP8266](https://en.wikipedia.org/wiki/ESP8266) WiFi module.
mbed_official 21:b88cdeb5b302 179 1. Updated [Espressif Firmware](https://developer.mbed.org/teams/ESP8266/wiki/Firmware-Update).
mbed_official 21:b88cdeb5b302 180 1. Mount the WiFi module onto [K64F Grove Shield v2](https://developer.mbed.org/platforms/FRDM-K64F/#supported-seeed-studio-grove-extension).
Yogesh Pande 0:7d5ec759888b 181 1. Attach the shield on the K64F board.
Yogesh Pande 0:7d5ec759888b 182 1. In the `mbed_app.json` file, change
mbed_official 21:b88cdeb5b302 183
Yogesh Pande 0:7d5ec759888b 184 ```json
Yogesh Pande 0:7d5ec759888b 185 "network-interface": {
Yogesh Pande 0:7d5ec759888b 186 "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD.",
Yogesh Pande 0:7d5ec759888b 187 "value": "WIFI"
Yogesh Pande 0:7d5ec759888b 188 }
Yogesh Pande 0:7d5ec759888b 189 ```
Yogesh Pande 0:7d5ec759888b 190
Yogesh Pande 0:7d5ec759888b 191 Provide your WiFi SSID and password here and leave `\"` in the beginning and end of your SSID and password (as shown in the example below). Otherwise, the example cannot pick up the SSID and password in correct format.
mbed_official 21:b88cdeb5b302 192
Yogesh Pande 0:7d5ec759888b 193 ```json
Yogesh Pande 0:7d5ec759888b 194 "wifi-ssid": {
Yogesh Pande 0:7d5ec759888b 195 "help": "WiFi SSID",
Yogesh Pande 0:7d5ec759888b 196 "value": "\"SSID\""
Yogesh Pande 0:7d5ec759888b 197 },
Yogesh Pande 0:7d5ec759888b 198 "wifi-password": {
Yogesh Pande 0:7d5ec759888b 199 "help": "WiFi Password",
Yogesh Pande 0:7d5ec759888b 200 "value": "\"Password\""
Yogesh Pande 0:7d5ec759888b 201 }
Yogesh Pande 0:7d5ec759888b 202 ```
Yogesh Pande 0:7d5ec759888b 203
mbed_official 21:b88cdeb5b302 204 <span class="notes">**Note:** Some devices do not support the Grove Shield or use the primary UART for USB communication. On such devices, the `mbed_app.json` should be modified to use the serial pins connected to the ESP8266.</span>
mbed_official 13:c44e318674db 205
mbed_official 21:b88cdeb5b302 206 For example, NUCLEO_F401RE requires a different serial connection:
mbed_official 13:c44e318674db 207
mbed_official 13:c44e318674db 208 ```json
mbed_official 13:c44e318674db 209 "wifi-tx": {
mbed_official 13:c44e318674db 210 "help": "TX pin for serial connection to external device",
mbed_official 13:c44e318674db 211 "value": "PA_11"
mbed_official 13:c44e318674db 212 },
mbed_official 13:c44e318674db 213 "wifi-rx": {
mbed_official 13:c44e318674db 214 "help": "RX pin for serial connection to external device",
mbed_official 13:c44e318674db 215 "value": "PA_12"
mbed_official 13:c44e318674db 216 }
mbed_official 13:c44e318674db 217 ```
mbed_official 13:c44e318674db 218
mbed_official 13:c44e318674db 219
Yogesh Pande 0:7d5ec759888b 220 ### IP address setup
Yogesh Pande 0:7d5ec759888b 221
Yogesh Pande 0:7d5ec759888b 222 This example uses IPv4 to communicate with the [mbed Device Connector Server](https://api.connector.mbed.com) except for 6LoWPAN ND and Thread. The example program should automatically get an IPv4 address from the router when connected over Ethernet.
Yogesh Pande 0:7d5ec759888b 223
Yogesh Pande 0:7d5ec759888b 224 If your network does not have DHCP enabled, you have to manually assign a static IP address to the board. We recommend having DHCP enabled to make everything run smoothly.
Yogesh Pande 0:7d5ec759888b 225
Yogesh Pande 0:7d5ec759888b 226 ### Changing socket type
Yogesh Pande 0:7d5ec759888b 227
Yogesh Pande 0:7d5ec759888b 228 Your device can connect to mbed Device Connector via UDP or TCP binding mode. The default is UDP. The binding mode cannot be changed in 6LoWPAN ND or Thread mode.
Yogesh Pande 0:7d5ec759888b 229
Yogesh Pande 0:7d5ec759888b 230 To change the binding mode:
Yogesh Pande 0:7d5ec759888b 231
Yogesh Pande 0:7d5ec759888b 232 1. In the `simpleclient.h` file, find the parameter `SOCKET_MODE`. The default is `M2MInterface::UDP`.
Yogesh Pande 0:7d5ec759888b 233 1. To switch to TCP, change it to `M2MInterface::TCP`.
Yogesh Pande 0:7d5ec759888b 234 1. Rebuild and flash the application.
Yogesh Pande 0:7d5ec759888b 235
Yogesh Pande 0:7d5ec759888b 236 <span class="tips">**Tip:** The instructions in this document remain the same, irrespective of the socket mode you select.</span>
Yogesh Pande 0:7d5ec759888b 237
Yogesh Pande 0:7d5ec759888b 238 ## Building the example
Yogesh Pande 0:7d5ec759888b 239
mbed_official 21:b88cdeb5b302 240 To build the example using mbed CLI:
Yogesh Pande 0:7d5ec759888b 241
Yogesh Pande 0:7d5ec759888b 242 1. Open a command line tool and navigate to the project’s directory.
mbed_official 21:b88cdeb5b302 243
mbed_official 21:b88cdeb5b302 244 2. Import this example:
mbed_official 21:b88cdeb5b302 245
mbed_official 21:b88cdeb5b302 246 ```
mbed_official 21:b88cdeb5b302 247 mbed import mbed-os-example-client
mbed_official 21:b88cdeb5b302 248 ```
mbed_official 21:b88cdeb5b302 249
mbed_official 21:b88cdeb5b302 250 3. [Configure](#application-setup) the client application.
mbed_official 21:b88cdeb5b302 251
mbed_official 21:b88cdeb5b302 252 4. To build the application, select the hardware board and build the toolchain using the command:
mbed_official 21:b88cdeb5b302 253
mbed_official 21:b88cdeb5b302 254 ```
mbed_official 21:b88cdeb5b302 255 mbed compile -m K64F -t GCC_ARM -c
mbed_official 21:b88cdeb5b302 256 ```
mbed_official 21:b88cdeb5b302 257
mbed_official 21:b88cdeb5b302 258 mbed CLI builds a binary file under the project’s `BUILD/` directory.
Yogesh Pande 0:7d5ec759888b 259
mbed_official 21:b88cdeb5b302 260 5. Plug the Ethernet cable into the board if you are using Ethernet mode.
mbed_official 21:b88cdeb5b302 261
mbed_official 21:b88cdeb5b302 262 6. If you are using 6LoWPAN ND or Thread mode, connect and power on the gateway first.
mbed_official 21:b88cdeb5b302 263
mbed_official 21:b88cdeb5b302 264 7. Plug the micro-USB cable into the **OpenSDA** port. The board is listed as a mass-storage device.
mbed_official 21:b88cdeb5b302 265
mbed_official 21:b88cdeb5b302 266 8. Drag the binary `BUILD/K64F/GCC_ARM/mbed-os-example-client.bin` to the board to flash the application.
mbed_official 21:b88cdeb5b302 267
mbed_official 21:b88cdeb5b302 268 9. The board is automatically programmed with the new binary. A flashing LED on it indicates that it is still working. When the LED stops blinking, the board is ready to work.
mbed_official 21:b88cdeb5b302 269
mbed_official 21:b88cdeb5b302 270 10. Press the **Reset** button on the board to run the program.
mbed_official 21:b88cdeb5b302 271
mbed_official 21:b88cdeb5b302 272 11. For verification, continue to the [Monitoring the application](#monitoring-the-application) chapter.
mbed_official 21:b88cdeb5b302 273
mbed_official 21:b88cdeb5b302 274 **To build the example using the Online IDE:**
mbed_official 21:b88cdeb5b302 275
mbed_official 21:b88cdeb5b302 276 Import this repository in the Online IDE and continue from step 3 onwards.
Yogesh Pande 0:7d5ec759888b 277
Yogesh Pande 0:7d5ec759888b 278 ## Monitoring the application
Yogesh Pande 0:7d5ec759888b 279
Yogesh Pande 0:7d5ec759888b 280 The application prints debug messages over the serial port, so you can monitor its activity with a serial port monitor. The application uses baud rate 115200.
Yogesh Pande 0:7d5ec759888b 281
Yogesh Pande 0:7d5ec759888b 282 <span class="notes">**Note:** Instructions to set this up are located [here](https://developer.mbed.org/handbook/SerialPC#host-interface-and-terminal-applications).</span>
Yogesh Pande 0:7d5ec759888b 283
Yogesh Pande 0:7d5ec759888b 284 After connecting, you should see messages about connecting to mbed Device Connector:
Yogesh Pande 0:7d5ec759888b 285
Yogesh Pande 0:7d5ec759888b 286 ```
mbed_official 5:b7d7ca715fdb 287 Starting mbed Client example...
mbed_official 5:b7d7ca715fdb 288 Using <Network Interface>
mbed_official 5:b7d7ca715fdb 289
mbed_official 5:b7d7ca715fdb 290 Connected to Network successfully
mbed_official 5:b7d7ca715fdb 291 IP address xxx.xxx.xxx.xxx
mbed_official 5:b7d7ca715fdb 292
mbed_official 5:b7d7ca715fdb 293 SOCKET_MODE : UDP
mbed_official 5:b7d7ca715fdb 294 Connecting to coap://api.connector.mbed.com:5684
mbed_official 5:b7d7ca715fdb 295
Yogesh Pande 0:7d5ec759888b 296 ```
Yogesh Pande 0:7d5ec759888b 297
mbed_official 21:b88cdeb5b302 298 <span class="notes">**Note:** Device name is the endpoint name you will need later on when [testing the application](https://github.com/ARMmbed/mbed-os-example-client#testing-the-application).</span>
Yogesh Pande 0:7d5ec759888b 299
mbed_official 21:b88cdeb5b302 300 When you press the **SW2** button on your board you should see messages about the value changes:
Yogesh Pande 0:7d5ec759888b 301
Yogesh Pande 0:7d5ec759888b 302 ```
Yogesh Pande 0:7d5ec759888b 303 handle_button_click, new value of counter is 1
Yogesh Pande 0:7d5ec759888b 304 ```
Yogesh Pande 0:7d5ec759888b 305
Yogesh Pande 0:7d5ec759888b 306 ## Testing the application
Yogesh Pande 0:7d5ec759888b 307
Yogesh Pande 0:7d5ec759888b 308 1. Flash the application.
mbed_official 21:b88cdeb5b302 309 2. Verify that the registration succeeded. You should see `Registered object successfully!` printed to the serial port.
mbed_official 21:b88cdeb5b302 310 3. On mbed Device Connector, go to [My devices > Connected devices](https://connector.mbed.com/#endpoints). Your device should be listed here.
mbed_official 21:b88cdeb5b302 311 4. Press the **SW2** button on the device a number of times (make a note of how many times you did that).
mbed_official 21:b88cdeb5b302 312 5. Go to [Device Connector > API Console](https://connector.mbed.com/#console).
mbed_official 21:b88cdeb5b302 313 6. Click the **Endpoint directory lookups** drop down menu.
mbed_official 21:b88cdeb5b302 314 ![](/docs/img/ep_lookup.PNG)
mbed_official 21:b88cdeb5b302 315 7. In the menu, click **GET** next to **Endpoint's resource representation**. Select your _endpoint_ and _resource-path_. For example, the _endpoint_ is the identifier of your endpoint that can be found in the `security.h` file as `MBED_ENDPOINT_NAME`. Choose `3200/0/5501`as a resource path and click **TEST API**.
mbed_official 21:b88cdeb5b302 316 8. The number of times you pressed **SW2** is shown.
mbed_official 21:b88cdeb5b302 317 9. Press the **SW3** button to unregister from mbed Device Connector. You should see `Unregistered Object Successfully` printed to the serial port and the LED starts blinking. This will also stop your application. Press the **Reset** button to run the program again.
Yogesh Pande 0:7d5ec759888b 318
mbed_official 21:b88cdeb5b302 319 <span class="notes">**Note:** On non-K64F boards, there is no unregistration functionality and button presses are simulated through timer ticks incrementing every 15 seconds.</span>
Yogesh Pande 0:7d5ec759888b 320
Yogesh Pande 0:7d5ec759888b 321 ![SW2 pressed five times, as shown by the API Console](clicks.png)
Yogesh Pande 0:7d5ec759888b 322
Yogesh Pande 0:7d5ec759888b 323 <span class="tips">**Tip:** If you get an error, for example `Server Response: 410 (Gone)`, clear your browser's cache, log out, and log back in.</span>
Yogesh Pande 0:7d5ec759888b 324
mbed_official 21:b88cdeb5b302 325 <span class="notes">**Note:** Only GET methods can be executed through [Device Connector > API Console](https://connector.mbed.com/#console). For other methods, check the [mbed Device Connector Quick Start](https://github.com/ARMmbed/mbed-connector-api-node-quickstart).
Yogesh Pande 0:7d5ec759888b 326
Yogesh Pande 0:7d5ec759888b 327 ### Application resources
Yogesh Pande 0:7d5ec759888b 328
Yogesh Pande 0:7d5ec759888b 329 The application exposes three [resources](https://docs.mbed.com/docs/mbed-device-connector-web-interfaces/en/latest/#the-mbed-device-connector-data-model):
Yogesh Pande 0:7d5ec759888b 330
mbed_official 21:b88cdeb5b302 331 1. `3200/0/5501`. Number of presses of **SW2** (GET).
mbed_official 21:b88cdeb5b302 332 2. `3201/0/5850`. Blink function, blinks **LED1** when executed (POST).
Yogesh Pande 0:7d5ec759888b 333 3. `3201/0/5853`. Blink pattern, used by the blink function to determine how to blink. In the format of `1000:500:1000:500:1000:500` (PUT).
Yogesh Pande 0:7d5ec759888b 334
mbed_official 21:b88cdeb5b302 335 To learn how to get notifications when resource 1 changes, or how to use resources 2 and 3, read the [mbed Device Connector Quick Start](https://github.com/ARMmbed/mbed-connector-api-node-quickstart).