![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
ATT_SMS_System for home security system
Dependencies: FXOS8700CQ MODSERIAL mbed-rtos mbed
Fork of ATT_Cellular_IOT_Button by
Diff: config_me.h
- Revision:
- 24:bd480d2aade4
- Parent:
- 21:d0038d14ee7c
- Child:
- 50:8ac42961458c
diff -r 41e6c417ace1 -r bd480d2aade4 config_me.h --- a/config_me.h Wed Jul 13 19:39:56 2016 +0000 +++ b/config_me.h Wed Jul 13 20:01:12 2016 +0000 @@ -4,24 +4,35 @@ // User must set these for own context: // This is the server's base URL name. Example "www.google.com" +// Note that when you Fork a FLOW, it will typically assign either +// "run-east.att.io" or "run-west.att.io", so be sure to check this. static const char * MY_SERVER_URL = "run-west.att.io"; -// These are FLOW variables that must be read from your own FLOW account and placed here: +// These are FLOW fields from the Endpoints tab: #define FLOW_BASE_URL "/1e464b19cdcde/774c88d68202/86694923d5bf28a/in/flow" #define FLOW_INPUT_NAME "/climate" -// This in most cases should be left alone but is here if you want to talk a differnet protocol: +// Unless you want to use a different protocol, this field should be left as is: #define FLOW_URL_TYPE " HTTP/1.1\r\nHost: " -// This just needs to be a unique identifier 1 for each board that talks to each FLOW account. -// If you only have one board then you can just leave this alone but you have to use this -// identifier in your FLOW setup for identification. +// This identifier specifies with which FLOW device you are communicating. +// If you only have one devive there then you can just leave this as is. +// Once your FLOW device has been initialized (Virtual Device Initialize clicked), +// the Virtual Device will show up in M2X. This is its "DEVICE SERIAL" field #define FLOW_DEVICE_NAME "vstarterkit001" -// These are for? +// This constant defines how often sensors are read and sent up to FLOW +#define SENSOR_UPDATE_INTERVAL_MS 5000; //5 seconds + +// Specify here how many sensor parameters you want reported to FLOW. +// You can use only the temperature and humidity from the shield HTS221 +// or you can add the reading of the FXO8700CQ motion sensor on the FRDM-K64F board +// or if you have a SiLabs PMOD plugged into the shield, you can add its proximity sensor, +// UV light, visible ambient light and infrared ambient light readings #define TEMP_HUMIDITY_ONLY 1 #define TEMP_HUMIDITY_ACCELEROMETER 2 #define TEMP_HUMIDITY_ACCELEROMETER_PMODSENSORS 3 +static int iSensorsToReport = TEMP_HUMIDITY_ONLY; //modify this to change your selection // This is the APN name for the cellular network, you will need to change this, check the instructions included with your SIM card kit: static const char * MY_APN_STR = "m2m.com.attz";