![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
ATT_SMS_System for home security system
Dependencies: FXOS8700CQ MODSERIAL mbed-rtos mbed
Fork of ATT_Cellular_IOT_Button by
main.cpp
- Committer:
- fkellermavnet
- Date:
- 2016-07-26
- Revision:
- 53:dcccf2881fa0
- Parent:
- 52:9dafcb7f320f
- Child:
- 55:3abf9e3f42e6
File content as of revision 53:dcccf2881fa0:
#include "mbed.h" #include <cctype> #include <string> #include "SerialBuffered.h" #include "HTS221.h" #include "config_me.h" #include "wnc_control.h" #include "sensors.h" #include "hardware.h" I2C i2c(PTC11, PTC10); //SDA, SCL -- define the I2C pins being used // comment out the following line if color is not supported on the terminal #define USE_COLOR #ifdef USE_COLOR #define BLK "\033[30m" #define RED "\033[31m" #define GRN "\033[32m" #define YEL "\033[33m" #define BLU "\033[34m" #define MAG "\033[35m" #define CYN "\033[36m" #define WHT "\033[37m" #define DEF "\033[39m" #else #define BLK #define RED #define GRN #define YEL #define BLU #define MAG #define CYN #define WHT #define DEF #endif #define MDM_DBG_OFF 0 #define MDM_DBG_AT_CMDS (1 << 0) int mdm_dbgmask = MDM_DBG_OFF; #define WNC_WAIT_FOR_AT_CMD_MS 40 Serial pc(USBTX, USBRX); SerialBuffered mdm(PTD3, PTD2, 4096); DigitalOut led_green(LED_GREEN); DigitalOut led_red(LED_RED); DigitalOut led_blue(LED_BLUE); DigitalOut mdm_uart2_rx_boot_mode_sel(PTC17); // on powerup, 0 = boot mode, 1 = normal boot DigitalOut mdm_power_on(PTB9); // 0 = turn modem on, 1 = turn modem off (should be held high for >5 seconds to cycle modem) DigitalOut mdm_wakeup_in(PTC2); // 0 = let modem sleep, 1 = keep modem awake -- Note: pulled high on shield DigitalOut mdm_reset(PTC12); // active high DigitalOut shield_3v3_1v8_sig_trans_ena(PTC4); // 0 = disabled (all signals high impedence, 1 = translation active DigitalOut mdm_uart1_cts(PTD0); #define TOUPPER(a) (a) //toupper(a) const char ok_str[] = "OK"; const char error_str[] = "ERROR"; #define MDM_OK 0 #define MDM_ERR_TIMEOUT -1 #define MAX_AT_RSP_LEN 255 ssize_t mdm_getline(char *buff, size_t size, int timeout_ms) { int cin = -1; int cin_last; if (NULL == buff || size == 0) { return -1; } size_t len = 0; Timer timer; timer.start(); while ((len < (size-1)) && (timer.read_ms() < timeout_ms)) { if (mdm.readable()) { cin_last = cin; cin = mdm.getc(); if (isprint(cin)) { buff[len++] = (char)cin; continue; } else if (('\r' == cin_last) && ('\n' == cin)) { break; } } // wait_ms(1); } buff[len] = (char)NULL; return len; } int mdm_sendAtCmd(const char *cmd, const char **rsp_list, int timeout_ms) { // Per WNC wait: wait_ms(WNC_WAIT_FOR_AT_CMD_MS); if (cmd && strlen(cmd) > 0) { if (mdm_dbgmask & MDM_DBG_AT_CMDS) { printf(MAG "ATCMD: " DEF "--> " GRN "%s" DEF "\n", cmd); } mdm.puts(cmd); mdm.puts("\r\n"); } if (rsp_list) { Timer timer; char rsp[MAX_AT_RSP_LEN+1]; int len; timer.start(); while (timer.read_ms() < timeout_ms) { len = mdm_getline(rsp, sizeof(rsp), timeout_ms - timer.read_ms()); if (len < 0) return MDM_ERR_TIMEOUT; if (len == 0) continue; if (mdm_dbgmask & MDM_DBG_AT_CMDS) { printf(MAG "ATRSP: " DEF "<-- " CYN "%s" DEF "\n", rsp); } if (rsp_list) { int rsp_idx = 0; while (rsp_list[rsp_idx]) { if (strcasecmp(rsp, rsp_list[rsp_idx]) == 0) { return rsp_idx; } rsp_idx++; } } } return MDM_ERR_TIMEOUT; } return MDM_OK; } int mdm_init(void) { // Hard reset the modem (doesn't go through // the signal level translator) mdm_reset = 0; // disable signal level translator (necessary // for the modem to boot properly). All signals // except mdm_reset go through the level translator // and have internal pull-up/down in the module. While // the level translator is disabled, these pins will // be in the correct state. shield_3v3_1v8_sig_trans_ena = 0; // While the level translator is disabled and ouptut pins // are tristated, make sure the inputs are in the same state // as the WNC Module pins so that when the level translator is // enabled, there are no differences. mdm_uart2_rx_boot_mode_sel = 1; // UART2_RX should be high mdm_power_on = 0; // powr_on should be low mdm_wakeup_in = 1; // wake-up should be high mdm_uart1_cts = 0; // indicate that it is ok to send // Now, wait for the WNC Module to perform its initial boot correctly wait(1.0); // The WNC module initializes comms at 115200 8N1 so set it up mdm.baud(115200); //Now, enable the level translator, the input pins should now be the //same as how the M14A module is driving them with internal pull ups/downs. //When enabled, there will be no changes in these 4 pins... shield_3v3_1v8_sig_trans_ena = 1; // Now, give the modem 60 seconds to start responding by // sending simple 'AT' commands to modem once per second. Timer timer; timer.start(); while (timer.read() < 60) { const char * rsp_lst[] = { ok_str, error_str, NULL }; int rc = mdm_sendAtCmd("AT", rsp_lst, 500); if (rc == 0) return true; //timer.read(); wait_ms(1000 - (timer.read_ms() % 1000)); pc.printf("\r%d",timer.read_ms()/1000); } return false; } int mdm_sendAtCmdRsp(const char *cmd, const char **rsp_list, int timeout_ms, string * rsp, int * len) { static char cmd_buf[3200]; // Need enough room for the WNC sockreads (over 3000 chars) size_t n = strlen(cmd); // Per WNC wait: wait_ms(WNC_WAIT_FOR_AT_CMD_MS); if (cmd && n > 0) { if (mdm_dbgmask & MDM_DBG_AT_CMDS) { printf(MAG "ATCMD: " DEF "--> " GRN "%s" DEF "\n", cmd); } // mdm.puts(cmd); // mdm.puts("\r\n"); while (n--) { mdm.putc(*cmd++); wait_us(1000); }; mdm.putc('\r'); wait_us(1000); mdm.putc('\n'); wait_us(1000); } if (rsp_list) { rsp->erase(); // Clean up from prior cmd response *len = 0; Timer timer; timer.start(); while (timer.read_ms() < timeout_ms) { int lenCmd = mdm_getline(cmd_buf, sizeof(cmd_buf), timeout_ms - timer.read_ms()); if (lenCmd == 0) continue; if (lenCmd < 0) return MDM_ERR_TIMEOUT; else { *len += lenCmd; *rsp += cmd_buf; } if (mdm_dbgmask & MDM_DBG_AT_CMDS) { printf(MAG "ATRSP: " DEF "<-- " CYN "%s" DEF "\n", cmd_buf); } int rsp_idx = 0; while (rsp_list[rsp_idx]) { if (strcasecmp(cmd_buf, rsp_list[rsp_idx]) == 0) { return rsp_idx; } rsp_idx++; } } return MDM_ERR_TIMEOUT; } return MDM_OK; } void reinitialize_mdm(void) { // Initialize the modem printf(GRN "Modem RE-initializing..." DEF "\r\n"); if (!mdm_init()) { printf(RED "\n\rModem RE-initialization failed!" DEF "\n"); } printf("\r\n"); } // These are built on the fly string MyServerIpAddress; string MySocketData; // These are to be built on the fly string my_temp; string my_humidity; #define CTOF(x) ((x)*1.8+32) //******************************************************************************************************************************************** //* Create string with sensor readings that can be sent to flow as an HTTP get //******************************************************************************************************************************************** K64F_Sensors_t SENSOR_DATA = { .Temperature = "0", .Humidity = "0", .AccelX = "0", .AccelY = "0", .AccelZ = "0", .MagnetometerX = "0", .MagnetometerY = "0", .MagnetometerZ = "0", .AmbientLightVis = "0", .AmbientLightIr = "0", .UVindex = "0", .Proximity = "0", .Temperature_Si7020 = "0", .Humidity_Si7020 = "0" }; void GenerateModemString(char * modem_string) { switch(iSensorsToReport) { case TEMP_HUMIDITY_ONLY: { sprintf(modem_string, "GET %s%s?serial=%s&temp=%s&humidity=%s %s%s\r\n\r\n", FLOW_BASE_URL, FLOW_INPUT_NAME, FLOW_DEVICE_NAME, SENSOR_DATA.Temperature, SENSOR_DATA.Humidity, FLOW_URL_TYPE, MY_SERVER_URL); break; } case TEMP_HUMIDITY_ACCELEROMETER: { sprintf(modem_string, "GET %s%s?serial=%s&temp=%s&humidity=%s&accelX=%s&accelY=%s&accelZ=%s %s%s\r\n\r\n", FLOW_BASE_URL, FLOW_INPUT_NAME, FLOW_DEVICE_NAME, SENSOR_DATA.Temperature, SENSOR_DATA.Humidity, SENSOR_DATA.AccelX,SENSOR_DATA.AccelY,SENSOR_DATA.AccelZ, FLOW_URL_TYPE, MY_SERVER_URL); break; } case TEMP_HUMIDITY_ACCELEROMETER_PMODSENSORS: { sprintf(modem_string, "GET %s%s?serial=%s&temp=%s&humidity=%s&accelX=%s&accelY=%s&accelZ=%s&proximity=%s&light_uv=%s&light_vis=%s&light_ir=%s %s%s\r\n\r\n", FLOW_BASE_URL, FLOW_INPUT_NAME, FLOW_DEVICE_NAME, SENSOR_DATA.Temperature, SENSOR_DATA.Humidity, SENSOR_DATA.AccelX,SENSOR_DATA.AccelY,SENSOR_DATA.AccelZ, SENSOR_DATA.Proximity, SENSOR_DATA.UVindex, SENSOR_DATA.AmbientLightVis, SENSOR_DATA.AmbientLightIr, FLOW_URL_TYPE, MY_SERVER_URL); break; } default: { sprintf(modem_string, "Invalid sensor selected\r\n\r\n"); break; } } //switch(iSensorsToReport) } //GenerateModemString //Periodic timer Ticker OneMsTicker; volatile bool bTimerExpiredFlag = false; int OneMsTicks = 0; int iTimer1Interval_ms = 1000; //******************************************************************************************************************************************** //* Periodic 1ms timer tick //******************************************************************************************************************************************** void OneMsFunction() { OneMsTicks++; if ((OneMsTicks % iTimer1Interval_ms) == 0) { bTimerExpiredFlag = true; } } //OneMsFunction() //******************************************************************************************************************************************** //* Set the RGB LED's Color //* LED Color 0=Off to 7=White. 3 bits represent BGR (bit0=Red, bit1=Green, bit2=Blue) //******************************************************************************************************************************************** void SetLedColor(unsigned char ucColor) { //Note that when an LED is on, you write a 0 to it: led_red = !(ucColor & 0x1); //bit 0 led_green = !(ucColor & 0x2); //bit 1 led_blue = !(ucColor & 0x4); //bit 2 } //SetLedColor() //******************************************************************************************************************************************** //* Process JSON response messages //******************************************************************************************************************************************** bool extract_JSON(char* search_field, char* found_string) { char* beginquote; char* endquote; beginquote = strchr(search_field, '{'); //start of JSON endquote = strchr(search_field, '}'); //end of JSON if (beginquote) { uint16_t ifoundlen; if (endquote) { ifoundlen = (uint16_t) (endquote - beginquote) + 1; strncpy(found_string, beginquote, ifoundlen ); found_string[ifoundlen] = 0; //null terminate return true; } else { endquote = strchr(search_field, '\0'); //end of string... sometimes the end bracket is missing ifoundlen = (uint16_t) (endquote - beginquote) + 1; strncpy(found_string, beginquote, ifoundlen ); found_string[ifoundlen] = 0; //null terminate return false; } } else { return false; } } //extract_JSON bool parse_JSON(char* json_string) { char* beginquote; char token[] = "\"LED\":\""; beginquote = strstr(json_string, token ); if ((beginquote != 0)) { char cLedColor = beginquote[strlen(token)]; printf(GRN "LED Found : %c" DEF "\r\n", cLedColor); switch(cLedColor) { case 'O': { //Off SetLedColor(0); break; } case 'R': { //Red SetLedColor(1); break; } case 'G': { //Green SetLedColor(2); break; } case 'Y': { //Yellow SetLedColor(3); break; } case 'B': { //Blue SetLedColor(4); break; } case 'M': { //Magenta SetLedColor(5); break; } case 'T': { //Turquoise SetLedColor(6); break; } case 'W': { //White SetLedColor(7); break; } default: { break; } } //switch(cLedColor) return true; } else { return false; } } //parse_JSON int main() { int i; HTS221 hts221; pc.baud(115200); void hts221_init(void); // Set LED to RED until init finishes SetLedColor(0x1); pc.printf(BLU "Hello World from AT&T Shape!\r\n\n\r"); pc.printf(GRN "Initialize the HTS221\n\r"); i = hts221.begin(); if( i ) pc.printf(BLU "HTS221 Detected! (0x%02X)\n\r",i); else pc.printf(RED "HTS221 NOT DETECTED!!\n\r"); printf("Temp is: %0.2f F \n\r",CTOF(hts221.readTemperature())); printf("Humid is: %02d %%\n\r",hts221.readHumidity()); sensors_init(); read_sensors(); // Initialize the modem printf(GRN "Modem initializing... will take up to 60 seconds" DEF "\r\n"); do { i=mdm_init(); if (!i) { pc.printf(RED "Modem initialization failed!" DEF "\n"); } } while (!i); //Software init software_init_mdm(); // Resolve URL to IP address to connect to resolve_mdm(); //Create a 1ms timer tick function: OneMsTicker.attach(OneMsFunction, 0.001f) ; iTimer1Interval_ms = SENSOR_UPDATE_INTERVAL_MS; // Open the socket (connect to the server) sockopen_mdm(); // Set LED BLUE for partial init SetLedColor(0x4); // Send and receive data perpetually while(1) { static unsigned ledOnce = 0; if (bTimerExpiredFlag) { bTimerExpiredFlag = false; puts("HTS221 START\r\n"); sprintf(SENSOR_DATA.Temperature, "%0.2f", CTOF(hts221.readTemperature())); sprintf(SENSOR_DATA.Humidity, "%02d", hts221.readHumidity()); puts("READ OTHER SENSORS START\r\n"); read_sensors(); //read available external sensors from a PMOD and the on-board motion sensor char modem_string[512]; puts("GENERATE MODEM STRING\r\n"); GenerateModemString(&modem_string[0]); printf(BLU "\r\nSending to modem : %s" DEF "\r\n", modem_string); sockwrite_mdm(modem_string); printf("READ START\r\n"); if (sockread_mdm(&MySocketData, 1024, 20)) { // If any non-zero response from server, make it GREEN one-time // then the actual FLOW responses will set the color. if (!ledOnce) { ledOnce = 1; SetLedColor(0x2); } printf(YEL "Read back : %s" DEF "\r\n", &MySocketData[0]); char myJsonResponse[512]; char stringToCharBuf[BUF_SIZE_FOR_N_MAX_SOCKREAD*MAX_WNC_SOCKREAD_PAYLOAD+1]; // WNC can return max of 1500 (per sockread) if ((MySocketData.length() + 1) < sizeof(stringToCharBuf)) { puts("STRING COPY\r\n"); strcpy(stringToCharBuf, MySocketData.c_str()); puts("EXTRACT JSON\r\n"); if (extract_JSON(stringToCharBuf, &myJsonResponse[0])) { printf(GRN "JSON : %s" DEF "\n", &myJsonResponse[0]); puts("PARSE JSON\r\n"); parse_JSON(&myJsonResponse[0]); } } else puts("BUFFER not big enough for sock data!\r\n"); } else { printf(RED "No response..." DEF "\r\n"); } puts("SOCKREAD DONE\r\n"); } //bTimerExpiredFlag } //forever loop }