Scott Jeong
/
auto_LED_Ethernet
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependencies: WIZnet_Library mbed
Revision 0:c07a663b50be, committed 2015-05-31
- Comitter:
- nanjsk
- Date:
- Sun May 31 17:24:22 2015 +0000
- Commit message:
- autu LED + Ethernet
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/WIZnet_Library.lib Sun May 31 17:24:22 2015 +0000 @@ -0,0 +1,1 @@ +http://developer.mbed.org/users/nanjsk/code/WIZnet_Library/#c1f1122adf7b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sun May 31 17:24:22 2015 +0000
@@ -0,0 +1,194 @@
+#include "mbed.h"
+#include "WIZnetInterface.h"
+
+#define USE_DHCP 0
+
+#define PORT 5000
+
+const char * IP_Addr = "192.168.1.194";
+const char * IP_Subnet = "255.255.255.0";
+const char * IP_Gateway = "192.168.1.1";
+const char * Target_IP = "192.168.1.63";
+unsigned char MAC_Addr[6] = {0x00,0x08,0xDC,0x12,0x34,0x56};
+
+Serial pc(USBTX, USBRX);
+
+//#ifdef TARGET_FRDM-KL25Z
+SPI spi(D11,D12,D13);
+WIZnetInterface ethernet(&spi,D10,D2);
+//#endif
+
+Timer t;
+
+DigitalOut ledR0(LED_RED);
+DigitalOut ledG0(LED_GREEN);
+//DigitalOut ledB0(LED_BLUE);
+
+DigitalOut led0(D5);
+DigitalOut led1(D6);
+
+DigitalIn PIR(D8);
+AnalogIn CDS(A0);
+
+#define PLED_ON led0 = led1 = 1
+#define PLED_OFF led0 = led1 = 0
+
+int CDS_data;
+int PIR_sensor;
+
+int CDS_check()
+{
+ CDS_data = CDS.read()*1000;
+ return CDS_data;
+}
+
+int PIR_check()
+{
+ PIR_sensor = PIR;
+ return PIR_sensor;
+}
+int main()
+{
+ ledR0 = ledG0 = 1;
+ PLED_OFF;
+ //PIR.mode(PullDown);
+ unsigned char flag = 1;
+ int csd_int = 2;
+ int pir_int0 = 2;
+ int pir_int1 = 2;
+ int pir_status = 0;
+
+ pc.baud(115200);
+ wait(0.5f);
+ pc.printf("Hello mbed!\n\r");
+ pc.printf("===========================================\n\r");
+
+ #if USE_DHCP
+ int ret = ethernet.init(MAC_Addr);
+ #else
+ int ret = ethernet.init(MAC_Addr,IP_Addr,IP_Subnet,IP_Gateway);
+ #endif
+
+ if (!ret) {
+ pc.printf("Initialized, MAC: %s\r\n", ethernet.getMACAddress());
+ ret = ethernet.connect();
+ if (!ret) {
+ pc.printf("IP: %s, MASK: %s, GW: %s\r\n",
+ ethernet.getIPAddress(), ethernet.getNetworkMask(), ethernet.getGateway());
+ } else {
+ pc.printf("Error ethernet.connect() - ret = %d\r\n", ret);
+ exit(0);
+ }
+ } else {
+ pc.printf("Error ethernet.init() - ret = %d\r\n", ret);
+ exit(0);
+ }
+
+ //TCPSocketServer server;
+// server.bind(PORT);
+// server.listen();
+
+ //pc.printf("\nWait for new connection...\r\n");
+ TCPSocketConnection client;
+
+ //server.accept(client);
+ //client.set_blocking(false, 0); // Timeout=0.
+ //pc.printf("Connection from: %s\r\n", client.get_address());
+ client.connect(Target_IP,5000);
+
+ if(client.is_connected() == 1){
+ pc.printf("Connected success : %s\r\n", client.get_address());
+ client.send("Hello server!\r\n", 15);
+ PLED_ON;
+ wait(0.2f);
+ PLED_OFF;
+ wait(0.2f);
+ PLED_ON;
+ wait(0.2f);
+ PLED_OFF;
+ }
+ else {
+ pc.printf("Connected fail : %s\r\n", client.get_address());
+ PLED_ON;
+ wait(0.4f);
+ PLED_OFF;
+ }
+
+ while (true) {
+ //printf("%d\r\n",CDS_check());
+ if(CDS_check() > 880){
+ if(csd_int != 0){
+ pc.printf("Now is dark.\r\n");
+ client.send("Now is dark.\r\n", 14);
+ csd_int = 0;
+ }
+ ledG0 = 0;
+ flag = 1;
+ while(flag){
+ if(PIR_check()){
+ if(pir_int0 != 0){
+ pc.printf("The movement is detected.\r\n");
+ pc.printf("Power LED is turned on.\r\n");
+ client.send("The movement is detected.\r\n", 27);
+ client.send("Power LED is turned on.\r\n", 25);
+ pir_int0 = 0;
+ }
+ t.stop();
+ t.reset();
+ t.start();
+ pir_status = 1;
+ ledR0 = 0;
+ PLED_ON;
+ }
+ if(pir_status == 0) {
+ flag = 0;
+ }
+ if(t.read_ms() > 5000 && pir_status == 1){
+ if(pir_int0 != 1){
+ pc.printf("The movement is not detected.\r\n");
+ pc.printf("Power LED is turned off.\r\n");
+ client.send("The movement is not detected.\r\n", 31);
+ client.send("Power LED is turned off.\r\n", 26);
+ pir_int0 = 1;
+ }
+ t.stop();
+ t.reset();
+ pir_status = 0;
+ ledR0 = 1;
+ PLED_OFF;
+ flag = 0;
+ wait(0.1f);
+ }
+ }
+ }
+ else{
+ if(csd_int != 1){
+ pc.printf("Now is brighter.\r\n");
+ client.send("Now is brighter.\r\n", 18);
+ csd_int = 1;
+ }
+
+ ledG0 = 1;
+ if(PIR_check()){
+ if(pir_int1 != 0){
+ pc.printf("The movement is detected.\r\n");
+ client.send("The movement is detected.\r\n", 27);
+ pir_int1 = 0;
+ }
+ ledR0 = 0;
+ }
+ else{
+ if(pir_int1 != 1){
+ pc.printf("The movement is not detected.\r\n");
+ client.send("The movement is not detected.\r\n", 31);
+ pir_int1 = 1;
+ }
+ ledR0 = 1;
+ }
+ }
+
+ //pc.printf("===========================================\n\r");
+ //ledB0 = !ledB0;
+ //wait(1);
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Sun May 31 17:24:22 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/cbbeb26dbd92 \ No newline at end of file