fix LPC812 PWM
Fork of mbed-dev by
Diff: targets/cmsis/TARGET_STM/TARGET_STM32L4/stm32l4xx_hal_firewall.c
- Revision:
- 0:9b334a45a8ff
diff -r 000000000000 -r 9b334a45a8ff targets/cmsis/TARGET_STM/TARGET_STM32L4/stm32l4xx_hal_firewall.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32L4/stm32l4xx_hal_firewall.c Thu Oct 01 15:25:22 2015 +0300 @@ -0,0 +1,308 @@ +/** + ****************************************************************************** + * @file stm32l4xx_hal_firewall.c + * @author MCD Application Team + * @version V1.0.0 + * @date 26-June-2015 + * @brief FIREWALL HAL module driver. + * This file provides firmware functions to manage the Firewall + * Peripheral initialization and enabling. + * + * + @verbatim + =============================================================================== + ##### How to use this driver ##### + =============================================================================== + [..] + The FIREWALL HAL driver can be used as follows: + + (#) Declare a FIREWALL_InitTypeDef initialization structure. + + (#) Resort to HAL_FIREWALL_Config() API to initialize the Firewall + + (#) Enable the FIREWALL in calling HAL_FIREWALL_EnableFirewall() API + + (#) To ensure that any code executed outside the protected segment closes the + FIREWALL, the user must set the flag FIREWALL_PRE_ARM_SET in calling + __HAL_FIREWALL_PREARM_ENABLE() macro if called within a protected code segment + or + HAL_FIREWALL_EnablePreArmFlag() API if called outside of protected code segment + after HAL_FIREWALL_Config() call. + + + @endverbatim + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l4xx_hal.h" + +/** @addtogroup STM32L4xx_HAL_Driver + * @{ + */ + +/** @defgroup FIREWALL FIREWALL + * @brief HAL FIREWALL module driver + * @{ + */ +#ifdef HAL_FIREWALL_MODULE_ENABLED + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + + +/** @defgroup FIREWALL_Exported_Functions FIREWALL Exported Functions + * @{ + */ + +/** @defgroup FIREWALL_Exported_Functions_Group1 Initialization Functions + * @brief Initialization and Configuration Functions + * +@verbatim +=============================================================================== + ##### Initialization and Configuration functions ##### + =============================================================================== + [..] + This subsection provides the functions allowing to initialize the Firewall. + Initialization is done by HAL_FIREWALL_Config(): + + (+) Enable the Firewall clock thru __HAL_RCC_FIREWALL_CLK_ENABLE() macro. + + (+) Set the protected code segment address start and length. + + (+) Set the protected non-volatile and/or volatile data segments + address starts and lengths if applicable. + + (+) Set the volatile data segment execution and sharing status. + + (+) Length must be set to 0 for an unprotected segment. + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the Firewall according to the FIREWALL_InitTypeDef structure parameters. + * @param fw_init: Firewall initialization structure + * @note The API returns HAL_ERROR if the Firewall is already enabled. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_FIREWALL_Config(FIREWALL_InitTypeDef * fw_init) +{ + /* Check the Firewall initialization structure allocation */ + if(fw_init == NULL) + { + return HAL_ERROR; + } + + /* Enable Firewall clock */ + __HAL_RCC_FIREWALL_CLK_ENABLE(); + + /* Make sure that Firewall is not enabled already */ + if (__HAL_FIREWALL_IS_ENABLED() != RESET) + { + return HAL_ERROR; + } + + /* Check Firewall configuration addresses and lengths when segment is protected */ + /* Code segment */ + if (fw_init->CodeSegmentLength != 0) + { + assert_param(IS_FIREWALL_CODE_SEGMENT_ADDRESS(fw_init->CodeSegmentStartAddress)); + assert_param(IS_FIREWALL_CODE_SEGMENT_LENGTH(fw_init->CodeSegmentStartAddress, fw_init->CodeSegmentLength)); + } + /* Non volatile data segment */ + if (fw_init->NonVDataSegmentLength != 0) + { + assert_param(IS_FIREWALL_NONVOLATILEDATA_SEGMENT_ADDRESS(fw_init->NonVDataSegmentStartAddress)); + assert_param(IS_FIREWALL_NONVOLATILEDATA_SEGMENT_LENGTH(fw_init->NonVDataSegmentStartAddress, fw_init->NonVDataSegmentLength)); + } + /* Volatile data segment */ + if (fw_init->VDataSegmentLength != 0) + { + assert_param(IS_FIREWALL_VOLATILEDATA_SEGMENT_ADDRESS(fw_init->VDataSegmentStartAddress)); + assert_param(IS_FIREWALL_VOLATILEDATA_SEGMENT_LENGTH(fw_init->VDataSegmentStartAddress, fw_init->VDataSegmentLength)); + } + + /* Check Firewall Configuration Register parameters */ + assert_param(IS_FIREWALL_VOLATILEDATA_EXECUTE(fw_init->VolatileDataExecution)); + assert_param(IS_FIREWALL_VOLATILEDATA_SHARE(fw_init->VolatileDataShared)); + + + /* Configuration */ + + /* Protected code segment start address configuration */ + WRITE_REG(FIREWALL->CSSA, (FW_CSSA_ADD & fw_init->CodeSegmentStartAddress)); + /* Protected code segment length configuration */ + WRITE_REG(FIREWALL->CSL, (FW_CSL_LENG & fw_init->CodeSegmentLength)); + + /* Protected non volatile data segment start address configuration */ + WRITE_REG(FIREWALL->NVDSSA, (FW_NVDSSA_ADD & fw_init->NonVDataSegmentStartAddress)); + /* Protected non volatile data segment length configuration */ + WRITE_REG(FIREWALL->NVDSL, (FW_NVDSL_LENG & fw_init->NonVDataSegmentLength)); + + /* Protected volatile data segment start address configuration */ + WRITE_REG(FIREWALL->VDSSA, (FW_VDSSA_ADD & fw_init->VDataSegmentStartAddress)); + /* Protected volatile data segment length configuration */ + WRITE_REG(FIREWALL->VDSL, (FW_VDSL_LENG & fw_init->VDataSegmentLength)); + + /* Set Firewall Configuration Register VDE and VDS bits + (volatile data execution and shared configuration) */ + MODIFY_REG(FIREWALL->CR, FW_CR_VDS|FW_CR_VDE, fw_init->VolatileDataExecution|fw_init->VolatileDataShared); + + return HAL_OK; +} + +/** + * @brief Retrieve the Firewall configuration. + * @param fw_config: Firewall configuration, type is same as initialization structure + * @note This API can't be executed inside a code area protected by the Firewall + * when the Firewall is enabled + * @note If NVDSL register is different from 0, that is, if the non volatile data segment + * is defined, this API can't be executed when the Firewall is enabled. + * @note User should resort to __HAL_FIREWALL_GET_PREARM() macro to retrieve FPA bit status + * @retval None + */ +void HAL_FIREWALL_GetConfig(FIREWALL_InitTypeDef * fw_config) +{ + + /* Enable Firewall clock, in case no Firewall configuration has been carried + out up to this point */ + __HAL_RCC_FIREWALL_CLK_ENABLE(); + + /* Retrieve code segment protection setting */ + fw_config->CodeSegmentStartAddress = (READ_REG(FIREWALL->CSSA) & FW_CSSA_ADD); + fw_config->CodeSegmentLength = (READ_REG(FIREWALL->CSL) & FW_CSL_LENG); + + /* Retrieve non volatile data segment protection setting */ + fw_config->NonVDataSegmentStartAddress = (READ_REG(FIREWALL->NVDSSA) & FW_NVDSSA_ADD); + fw_config->NonVDataSegmentLength = (READ_REG(FIREWALL->NVDSL) & FW_NVDSL_LENG); + + /* Retrieve volatile data segment protection setting */ + fw_config->VDataSegmentStartAddress = (READ_REG(FIREWALL->VDSSA) & FW_VDSSA_ADD); + fw_config->VDataSegmentLength = (READ_REG(FIREWALL->VDSL) & FW_VDSL_LENG); + + /* Retrieve volatile data execution setting */ + fw_config->VolatileDataExecution = (READ_REG(FIREWALL->CR) & FW_CR_VDE); + + /* Retrieve volatile data shared setting */ + fw_config->VolatileDataShared = (READ_REG(FIREWALL->CR) & FW_CR_VDS); + + return; +} + + + +/** + * @brief Enable FIREWALL. + * @note Firewall is enabled in clearing FWDIS bit of SYSCFG CFGR1 register. + * Once enabled, the Firewall cannot be disabled by software. Only a + * system reset can set again FWDIS bit. + * @retval None + */ +void HAL_FIREWALL_EnableFirewall(void) +{ + /* Clears FWDIS bit of SYSCFG CFGR1 register */ + CLEAR_BIT(SYSCFG->CFGR1, SYSCFG_CFGR1_FWDIS); + +} + +/** + * @brief Enable FIREWALL pre arm. + * @note When FPA bit is set, any code executed outside the protected segment + * will close the Firewall. + * @note This API provides the same service as __HAL_FIREWALL_PREARM_ENABLE() macro + * but can't be executed inside a code area protected by the Firewall. + * @note When the Firewall is disabled, user can resort to HAL_FIREWALL_EnablePreArmFlag() API any time. + * @note When the Firewall is enabled and NVDSL register is equal to 0 (that is, + * when the non volatile data segment is not defined), + * ** this API can be executed when the Firewall is closed + * ** when the Firewall is opened, user should resort to + * __HAL_FIREWALL_PREARM_ENABLE() macro instead + * @note When the Firewall is enabled and NVDSL register is different from 0 + * (that is, when the non volatile data segment is defined) + * ** FW_CR register can be accessed only when the Firewall is opened: + * user should resort to __HAL_FIREWALL_PREARM_ENABLE() macro instead. + * @retval None + */ +void HAL_FIREWALL_EnablePreArmFlag(void) +{ + /* Set FPA bit */ + SET_BIT(FIREWALL->CR, FW_CR_FPA); +} + + +/** + * @brief Disable FIREWALL pre arm. + * @note When FPA bit is reset, any code executed outside the protected segment + * when the Firewall is opened will generate a system reset. + * @note This API provides the same service as __HAL_FIREWALL_PREARM_DISABLE() macro + * but can't be executed inside a code area protected by the Firewall. + * @note When the Firewall is disabled, user can resort to HAL_FIREWALL_EnablePreArmFlag() API any time. + * @note When the Firewall is enabled and NVDSL register is equal to 0 (that is, + * when the non volatile data segment is not defined), + * ** this API can be executed when the Firewall is closed + * ** when the Firewall is opened, user should resort to + * __HAL_FIREWALL_PREARM_DISABLE() macro instead + * @note When the Firewall is enabled and NVDSL register is different from 0 + * (that is, when the non volatile data segment is defined) + * ** FW_CR register can be accessed only when the Firewall is opened: + * user should resort to __HAL_FIREWALL_PREARM_DISABLE() macro instead. + + * @retval None + */ +void HAL_FIREWALL_DisablePreArmFlag(void) +{ + /* Clear FPA bit */ + CLEAR_BIT(FIREWALL->CR, FW_CR_FPA); +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* HAL_FIREWALL_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/