en 129
fix LPC812 PWM
Fork of
mbed-dev
by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_rtc_ex.h
- Revision:
- 113:b3775bf36a83
- Parent:
- 0:9b334a45a8ff
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_rtc_ex.h Sun Apr 17 17:45:10 2016 +0100
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_rtc_ex.h Tue Apr 19 11:15:15 2016 +0100
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32l0xx_hal_rtc_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 06-February-2015
+ * @version V1.5.0
+ * @date 8-January-2016
* @brief Header file of RTC HAL Extended module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -56,7 +56,7 @@
/* Exported types ------------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Types RTC Extended Exported Types
+/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
* @{
*/
@@ -100,44 +100,23 @@
*/
/* Exported constants --------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Constants RTC Extended Exported Constants
+/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
* @{
*/
-
-/** @defgroup RTCEx_Interrupts_Definitions RTC Extended Interrupts Definitions
+/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition
* @{
*/
-#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
- defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx)
-
-#define RTC_IT_TAMP3 RTC_TAMPCR_TAMP3IE
-
-#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
- * (STM32L073xx) || (STM32L072xx) || (STM32L071xx)
- */
+#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000)
+#define RTC_OUTPUT_ALARMA ((uint32_t)RTC_CR_OSEL_0)
+#define RTC_OUTPUT_ALARMB ((uint32_t)RTC_CR_OSEL_1)
+#define RTC_OUTPUT_WAKEUP ((uint32_t)RTC_CR_OSEL)
+
/**
* @}
*/
-
-
-/** @defgroup RTCEx_Flags_Definitions RTC Extended Flags Definitions
- * @{
- */
-#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
- defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx)
-
-#define RTC_FLAG_TAMP3F RTC_ISR_TAMP3F
-
-#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
- * (STM32L073xx) || (STM32L072xx) || (STM32L071xx)
- */
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Backup_Registers_Definitions RTC Extended Backup Registers Definition
+
+/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition
* @{
*/
#define RTC_BKP_DR0 ((uint32_t)0x00000000)
@@ -145,170 +124,133 @@
#define RTC_BKP_DR2 ((uint32_t)0x00000002)
#define RTC_BKP_DR3 ((uint32_t)0x00000003)
#define RTC_BKP_DR4 ((uint32_t)0x00000004)
-
-#define IS_RTC_BKP(__BKP__) (((__BKP__) == RTC_BKP_DR0) || \
- ((__BKP__) == RTC_BKP_DR1) || \
- ((__BKP__) == RTC_BKP_DR2) || \
- ((__BKP__) == RTC_BKP_DR3) || \
- ((__BKP__) == RTC_BKP_DR4))
/**
* @}
*/
-/** @defgroup RTC_Mask_Definition RTC Mask Definition
- * @{
- */
-/* Masks Definition */
-
-#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
- defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx)
-
-#define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP3F | RTC_FLAG_TAMP2F | \
- RTC_FLAG_TAMP1F| RTC_FLAG_TSOVF | RTC_FLAG_TSF | \
- RTC_FLAG_WUTF | RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | \
- RTC_FLAG_INIT | RTC_FLAG_INITF | RTC_FLAG_RSF | \
- RTC_FLAG_INITS | RTC_FLAG_SHPF | RTC_FLAG_WUTWF | \
- RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF))
-
-#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP3E | RTC_TAMPCR_TAMP2E | RTC_TAMPCR_TAMP1E))
-
-#else
-
-#define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP2F | RTC_FLAG_TAMP1F| \
- RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
- RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INIT | \
- RTC_FLAG_INITF | RTC_FLAG_RSF | RTC_FLAG_INITS | \
- RTC_FLAG_SHPF | RTC_FLAG_WUTWF |RTC_FLAG_ALRBWF | \
- RTC_FLAG_ALRAWF))
-
-#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP2E | RTC_TAMPCR_TAMP1E))
-
-#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
- * (STM32L073xx) || (STM32L072xx) || (STM32L071xx)
- */
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC Extended Time Stamp Edges definition
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition
* @{
*/
#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
#define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE
-#define IS_TIMESTAMP_EDGE(__EDGE__) (((__EDGE__) == RTC_TIMESTAMPEDGE_RISING) || \
- ((__EDGE__) == RTC_TIMESTAMPEDGE_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection
+ * @{
+ */
+#define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000)
+
/**
* @}
*/
-/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Extended Tamper Pins Definition
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definition
* @{
*/
+#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
+ defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx) ||\
+ defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx)
+
+#define RTC_TAMPER_1 RTC_TAMPCR_TAMP1E
-#define RTC_TAMPER_1 RTC_TAMPCR_TAMP1E
+#endif /* (STM32L063xx) || (STM32L062xx) || (STM32L061xx) ||
+ * (STM32L053xx) || (STM32L052xx) || (STM32L051xx) ||
+ * (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
+ * (STM32L073xx) || (STM32L072xx) || (STM32L071xx) ||
+ * (STM32L031xx) || (STM32L041xx)
+ */
+
#define RTC_TAMPER_2 RTC_TAMPCR_TAMP2E
#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
- defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx)
-
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
+
#define RTC_TAMPER_3 RTC_TAMPCR_TAMP3E
#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
- * (STM32L073xx) || (STM32L072xx) || (STM32L071xx)
+ * (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
+ * (STM32L011xx) || (STM32L021xx)
*/
-#define IS_RTC_TAMPER(__TAMPER__) ((((__TAMPER__) & ((uint32_t)(0xFFFFFFFF ^ RTC_TAMPCR_TAMPXE))) == 0x00) && ((__TAMPER__) != (uint32_t)RESET))
-
/**
* @}
*/
-/** @defgroup RTCEx_Tamper_Interrupt_Definitions RTC Extended Tamper Interrupt Definitions
+/** @defgroup RTCEx_Tamper_Interrupt_Definitions RTCEx Tamper Interrupt Definitions
* @{
*/
+#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
+ defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx) ||\
+ defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx)
#define RTC_TAMPER1_INTERRUPT RTC_TAMPCR_TAMP1IE
-#define RTC_TAMPER2_INTERRUPT RTC_TAMPCR_TAMP2IE
-#define RTC_ALL_TAMPER_INTERRUPT RTC_TAMPCR_TAMPIE
+#endif /* (STM32L063xx) || (STM32L062xx) || (STM32L061xx) ||
+ * (STM32L053xx) || (STM32L052xx) || (STM32L051xx) ||
+ * (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
+ * (STM32L073xx) || (STM32L072xx) || (STM32L071xx) ||
+ * (STM32L031xx) || (STM32L041xx)
+ */
+
+#define RTC_TAMPER2_INTERRUPT RTC_TAMPCR_TAMP2IE
#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
- defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx)
-
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
+
#define RTC_TAMPER3_INTERRUPT RTC_TAMPCR_TAMP3IE
-#define IS_RTC_TAMPER_INTERRUPT(__INTERRUPT__) (((__INTERRUPT__) == RTC_TAMPER1_INTERRUPT) || \
- ((__INTERRUPT__) == RTC_TAMPER2_INTERRUPT) || \
- ((__INTERRUPT__) == RTC_TAMPER3_INTERRUPT) || \
- ((__INTERRUPT__) == RTC_ALL_TAMPER_INTERRUPT ))
-
-#else
-
-#define IS_RTC_TAMPER_INTERRUPT(__INTERRUPT__) (((__INTERRUPT__) == RTC_TAMPER1_INTERRUPT) || \
- ((__INTERRUPT__) == RTC_TAMPER2_INTERRUPT) || \
- ((__INTERRUPT__) == RTC_ALL_TAMPER_INTERRUPT ))
#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
- * (STM32L073xx) || (STM32L072xx) || (STM32L071xx)
+ * (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
+ * (STM32L011xx) || (STM32L021xx)
*/
+#define RTC_ALL_TAMPER_INTERRUPT RTC_TAMPCR_TAMPIE
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definitions
+ * @{
+ */
+#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
+#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
/**
* @}
*/
-/** @defgroup RTCEx_TimeStamp_Pin_Selections RTC Extended TimeStamp Pin Selection
- * @{
- */
-#define RTC_TIMESTAMPPIN_PC13 ((uint32_t)0x00000000)
-
-#define IS_RTC_TIMESTAMP_PIN(__PIN__) (((__PIN__) == RTC_TIMESTAMPPIN_PC13))
+/** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTCEx Tamper EraseBackUp Definitions
+* @{
+*/
+#define RTC_TAMPER_ERASE_BACKUP_ENABLE ((uint32_t)0x00000000)
+#define RTC_TAMPER_ERASE_BACKUP_DISABLE ((uint32_t)0x00020000)
/**
* @}
*/
-/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Extended Tamper Trigger Definition
- * @{
- */
-#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
-#define RTC_TAMPERTRIGGER_FALLINGEDGE RTC_TAMPCR_TAMP1TRG
-#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
-#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
-
-#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
- ((__TRIGGER__) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
- ((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
- ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+/** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTCEx Tamper MaskFlag Definitions
+* @{
+*/
+#define RTC_TAMPERMASK_FLAG_DISABLE ((uint32_t)0x00000000)
+#define RTC_TAMPERMASK_FLAG_ENABLE ((uint32_t)0x00040000)
/**
* @}
*/
-/** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTC Extended Tamper EraseBackUp Definitions
-* @{
-*/
-#define RTC_TAMPER_ERASE_BACKUP_ENABLE ((uint32_t)0x00000000)
-#define RTC_TAMPER_ERASE_BACKUP_DISABLE RTC_TAMPCR_TAMP1NOERASE
-
-#define IS_RTC_TAMPER_ERASE_MODE(__MODE__) (((__MODE__) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \
- ((__MODE__) == RTC_TAMPER_ERASE_BACKUP_DISABLE))
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTC Extended Tamper MaskFlag Definitions
-* @{
-*/
-#define RTC_TAMPERMASK_FLAG_DISABLE ((uint32_t)0x00000000)
-#define RTC_TAMPERMASK_FLAG_ENABLE RTC_TAMPCR_TAMP1MF
-
-#define IS_RTC_TAMPER_MASKFLAG_STATE(__STATE__) (((__STATE__) == RTC_TAMPERMASK_FLAG_ENABLE ) || \
- ((__STATE__) == RTC_TAMPERMASK_FLAG_DISABLE))
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Extended Tamper Filter Definitions
+/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definitions
* @{
*/
#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
@@ -320,15 +262,11 @@
#define RTC_TAMPERFILTER_8SAMPLE RTC_TAMPCR_TAMPFLT /*!< Tamper is activated after 8
consecutive samples at the active leve. */
-#define IS_RTC_TAMPER_FILTER(__FILTER__) (((__FILTER__) == RTC_TAMPERFILTER_DISABLE) || \
- ((__FILTER__) == RTC_TAMPERFILTER_2SAMPLE) || \
- ((__FILTER__) == RTC_TAMPERFILTER_4SAMPLE) || \
- ((__FILTER__) == RTC_TAMPERFILTER_8SAMPLE))
/**
* @}
*/
-/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Extended Tamper Sampling Frequencies Definitions
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definitions
* @{
*/
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
@@ -349,19 +287,11 @@
RTC_TAMPCR_TAMPFREQ_2)) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 256 */
-#define IS_RTC_TAMPER_SAMPLING_FREQ(__FREQ__) (((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
- ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
- ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
- ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
- ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
- ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
- ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
- ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
/**
* @}
*/
-/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Extended Tamper Pin Precharge Duration Definitions
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definitions
* @{
*/
#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
@@ -373,39 +303,31 @@
#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)(RTC_TAMPCR_TAMPPRCH_0 | RTC_TAMPCR_TAMPPRCH_1)) /*!< Tamper pins are pre-charged before
sampling during 8 RTCCLK cycles */
-#define IS_RTC_TAMPER_PRECHARGE_DURATION(__DURATION_) (((__DURATION_) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
- ((__DURATION_) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
- ((__DURATION_) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
- ((__DURATION_) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
/**
* @}
*/
-/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Extended Tamper TimeStampOnTamperDetection Definitions
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definitions
* @{
*/
#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_TAMPCR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */
#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
-#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(__DETECTION__) (((__DETECTION__) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
- ((__DETECTION__) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
/**
* @}
*/
-/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Extended Tamper Pull UP Definitions
+/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definitions
* @{
*/
#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before sampling */
#define RTC_TAMPER_PULLUP_DISABLE RTC_TAMPCR_TAMPPUDIS /*!< Tamper pins pre-charge is disabled */
-#define IS_RTC_TAMPER_PULLUP_STATE(__STATE__) (((__STATE__) == RTC_TAMPER_PULLUP_ENABLE) || \
- ((__STATE__) == RTC_TAMPER_PULLUP_DISABLE))
/**
* @}
*/
-/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Extended Wakeup Timer Definitions
+/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions
* @{
*/
#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
@@ -414,100 +336,103 @@
#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t) (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1))
#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS RTC_CR_WUCKSEL_2
#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t) (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2))
-
-#define IS_RTC_WAKEUP_CLOCK(__CLOCK__) (((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
- ((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
- ((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
- ((__CLOCK__) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
- ((__CLOCK__) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
- ((__CLOCK__) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
-
-#define IS_RTC_WAKEUP_COUNTER(__COUNTER__) ((__COUNTER__) <= RTC_WUTR_WUT)
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Extended Smooth calib period Definitions
- * @{
- */
-#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
- period is 32s, else 2exp20 RTCCLK pulses */
-#define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CAL_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibation
- period is 16s, else 2exp19 RTCCLK pulses */
-#define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CAL_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibation
- period is 8s, else 2exp18 RTCCLK pulses */
-
-#define IS_RTC_SMOOTH_CALIB_PERIOD(__PERIOD__) (((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
- ((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
- ((__PERIOD__) == RTC_SMOOTHCALIB_PERIOD_8SEC))
/**
* @}
*/
-/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Extended Smooth calib Plus pulses Definitions
+/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions
* @{
*/
-#define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CAL_CALP /*!< The number of RTCCLK pulses added
- during a X -second window = Y - CALM[8:0]
- with Y = 512, 256, 128 when X = 32, 16, 8 */
-#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
- during a 32-second window = CALM[8:0] */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 32s, else 2exp20 RTCCLK pulses */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 16s, else 2exp19 RTCCLK pulses */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 8s, else 2exp18 RTCCLK pulses */
-#define IS_RTC_SMOOTH_CALIB_PLUS(__PLUS__) (((__PLUS__) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
- ((__PLUS__) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
/**
* @}
*/
-/** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions RTC Extended Smooth calib Minus pulses Definitions
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions
* @{
*/
-#define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= RTC_CAL_CALM)
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added
+ during a X -second window = Y - CALM[8:0]
+ with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
+ during a 32-second window = CALM[8:0] */
+
/**
* @}
*/
-
-/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTC Extended Add 1 Second Parameter Definitions
- * @{
- */
-#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
-#define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S
-
-#define IS_RTC_SHIFT_ADD1S(__SEL__) (((__SEL__) == RTC_SHIFTADD1S_RESET) || \
- ((__SEL__) == RTC_SHIFTADD1S_SET))
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Substract_Fraction_Of_Second_Value RTC Extended Substract Fraction Of Second Value
- * @{
- */
-#define IS_RTC_SHIFT_SUBFS(__FS__) ((__FS__) <= RTC_SHIFTR_SUBFS)
-/**
- * @}
- */
-
- /** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Extended Calib Output selection Definitions
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions
* @{
*/
#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
#define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL
-#define IS_RTC_CALIB_OUTPUT(__OUTPUT__) (((__OUTPUT__) == RTC_CALIBOUTPUT_512HZ) || \
- ((__OUTPUT__) == RTC_CALIBOUTPUT_1HZ))
+/**
+ * @}
+ */
+
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definitions
+ * @{
+ */
+#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
+#define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S
/**
* @}
*/
+ /** @defgroup RTCEx_Interrupts_Definitions RTCEx Interrupts Definitions
+ * @{
+ */
+#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
+
+#define RTC_IT_TAMP3 ((uint32_t)RTC_TAMPCR_TAMP3IE)
+
+#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
+ * (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
+ * (STM32L011xx) || (STM32L021xx)
+ */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Flags_Definitions RTCEx Flags Definitions
+ * @{
+ */
+#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
+
+#define RTC_FLAG_TAMP3F ((uint32_t)RTC_ISR_TAMP3F)
+
+#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
+ * (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
+ * (STM32L011xx) || (STM32L021xx)
+ */
+/**
+ * @}
+ */
+
/**
* @}
*/
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Macros RTC Extended Exported Macros
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
* @{
*/
+/* ---------------------------------WAKEUPTIMER---------------------------------*/
+/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
+ * @{
+ */
/**
* @brief Enable the RTC WakeUp Timer peripheral.
* @param __HANDLE__: specifies the RTC handle.
@@ -516,13 +441,6 @@
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
/**
- * @brief Enable the RTC TimeStamp peripheral.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
-
-/**
* @brief Disable the RTC WakeUp Timer peripheral.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
@@ -530,181 +448,65 @@
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
/**
- * @brief Disable the RTC TimeStamp peripheral.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
-
-/**
- * @brief Enable the RTC calibration output.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
-
-/**
- * @brief Disable the calibration output.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
-
-/**
- * @brief Enable the clock reference detection.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
-
-/**
- * @brief Disable the clock reference detection.
- * @param __HANDLE__: specifies the RTC handle.
- * @retval None
- */
-#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
-
-/**
- * @brief Enable the RTC TimeStamp interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_IT_TS: TimeStamp interrupt
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-
-/**
* @brief Enable the RTC WakeUpTimer interrupt.
* @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled.
* This parameter can be:
- * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
/**
- * @brief Disable the RTC TimeStamp interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_IT_TS: TimeStamp interrupt
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-
-/**
* @brief Disable the RTC WakeUpTimer interrupt.
* @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be disabled.
* This parameter can be:
- * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
/**
- * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Tamper interrupt sources to be enabled or disabled.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt to check.
* This parameter can be:
- * @arg RTC_IT_TAMP1
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
* @retval None
*/
-#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
-
-/**
- * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_IT_WUT: WakeUpTimer A interrupt
- * @retval None
- */
-#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
/**
- * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
* @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
* This parameter can be:
- * @arg RTC_IT_TS: TimeStamp interrupt
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
* @retval None
*/
-#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
-
-/**
- * @brief Get the selected RTC TimeStamp's flag status.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC TimeStamp Flag sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_FLAG_TSF
- * @arg RTC_FLAG_TSOVF
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
/**
* @brief Get the selected RTC WakeUpTimer's flag status.
* @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC WakeUpTimer Flag sources to be enabled or disabled.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag is pending or not.
* This parameter can be:
* @arg RTC_FLAG_WUTF
* @arg RTC_FLAG_WUTWF
* @retval None
*/
-#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-
-/**
- * @brief Get the selected RTC Tamper's flag status.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_FLAG_TAMP1F
- * @retval None
- */
-#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-
-/**
- * @brief Get the selected RTC shift operation's flag status.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
- * This parameter can be:
- * @arg RTC_FLAG_SHPF
- * @retval None
- */
-#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-
-/**
- * @brief Clear the RTC Time Stamp's pending flags.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_FLAG_TSF
- * @retval None
- */
-#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& RTC_FLAGS_MASK)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-
-/**
- * @brief Clear the RTC Tamper's pending flags.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_FLAG_TAMP1F
- * @retval None
- */
-#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& RTC_FLAGS_MASK)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
/**
* @brief Clear the RTC Wake Up timer's pending flags.
* @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag to clear.
* This parameter can be:
* @arg RTC_FLAG_WUTF
* @retval None
*/
-#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& RTC_FLAGS_MASK)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
/* WAKE-UP TIMER EXTI */
/* ------------------ */
@@ -760,14 +562,14 @@
* @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
* @retval None.
*/
-#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); } while(0);
/**
* @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
* This parameter can be:
* @retval None.
*/
-#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); } while(0);
/**
* @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.
@@ -786,8 +588,439 @@
* @retval None.
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+/**
+ * @}
+ */
+
+/* ---------------------------------TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Timestamp RTC Timestamp
+ * @{
+ */
+/**
+ * @brief Enable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+ * @brief Disable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+ * @brief Enable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to be enabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to be disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC TimeStamp's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Clear the RTC Time Stamp's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @}
+ */
+
+/* ---------------------------------TAMPER------------------------------------*/
+/** @defgroup RTCEx_Tamper RTC Tamper
+ * @{
+ */
+
+#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
+ defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx) ||\
+ defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx)
+/**
+ * @brief Enable the RTC Tamper1 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E))
+
+/**
+ * @brief Disable the RTC Tamper1 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E))
+
+#endif /* (STM32L063xx) || (STM32L062xx) || (STM32L061xx) ||
+ * (STM32L053xx) || (STM32L052xx) || (STM32L051xx) ||
+ * (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
+ * (STM32L073xx) || (STM32L072xx) || (STM32L071xx) ||
+ * (STM32L031xx) || (STM32L041xx)
+ */
+
+/**
+ * @brief Enable the RTC Tamper2 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP2E))
+
+/**
+ * @brief Disable the RTC Tamper2 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP2E))
+
+
+#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
+
+/**
+ * @brief Enable the RTC Tamper3 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP3E))
+
+/**
+ * @brief Disable the RTC Tamper3 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E))
+
+#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
+ * (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
+ * (STM32L011xx) || (STM32L021xx)
+ */
+/**************************************************************************************************/
+
+#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
+ defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx)
+
+/**
+ * @brief Enable the RTC Tamper interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_TAMP: All tampers interrupts
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Tamper interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_TAMP: All tampers interrupts
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__))
+
+#elif defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx)
+
+/**
+ * @brief Enable the RTC Tamper interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_TAMP: All tampers interrupts
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Tamper interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_TAMP: All tampers interrupts
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__))
+
+#elif defined (STM32L011xx) || defined (STM32L021xx)
+
+/**
+ * @brief Enable the RTC Tamper interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_TAMP: All tampers interrupts
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Tamper interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_TAMP: All tampers interrupts
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__))
+
+#endif /* (STM32L011xx) || (STM32L021xx)
+ */
+
+/**************************************************************************************************/
+
+#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
+ defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx)
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3)) != RESET) ? SET : RESET) : \
+ ((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5)) != RESET) ? SET : RESET))
+
+#elif defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx)
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3)) != RESET) ? SET : RESET) : \
+ ((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5)) != RESET) ? SET : RESET) : \
+ ((__INTERRUPT__) == RTC_IT_TAMP3) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7)) != RESET) ? SET : RESET))
+
+#elif defined (STM32L011xx) || defined (STM32L021xx)
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5)) != RESET) ? SET : RESET) : \
+ ((__INTERRUPT__) == RTC_IT_TAMP3) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7)) != RESET) ? SET : RESET))
+
+
+#endif /* (STM32L011xx) || (STM32L021xx)
+ */
+
+/**************************************************************************************************/
+
+#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
+ defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx)
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP: All tampers interrupts
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F: Tamper1 flag
+ * @arg RTC_FLAG_TAMP2F: Tamper2 flag
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F: Tamper1 flag
+ * @arg RTC_FLAG_TAMP2F: Tamper2 flag
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+
+#elif defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx)
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP: All tampers interrupts
+ * @arg RTC_IT_TAMP1: Tamper1 interrupt
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F: Tamper1 flag
+ * @arg RTC_FLAG_TAMP2F: Tamper2 flag
+ * @arg RTC_FLAG_TAMP3F: Tamper3 flag
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F: Tamper1 flag
+ * @arg RTC_FLAG_TAMP2F: Tamper2 flag
+ * @arg RTC_FLAG_TAMP3F: Tamper3 flag
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+#elif defined (STM32L011xx) || defined (STM32L021xx)
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP: All tampers interrupts
+ * @arg RTC_IT_TAMP2: Tamper2 interrupt
+ * @arg RTC_IT_TAMP3: Tamper3 interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP2F: Tamper2 flag
+ * @arg RTC_FLAG_TAMP3F: Tamper3 flag
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP2F: Tamper2 flag
+ * @arg RTC_FLAG_TAMP3F: Tamper3 flag
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+#endif /* (STM32L011xx) || (STM32L021xx)
+ */
+
+
+/**************************************************************************************************/
+
+/**
+ * @}
+ */
+
+/* --------------------------TAMPER/TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
+ * @{
+ */
+
/* TAMPER TIMESTAMP EXTI */
/* --------------------- */
/**
@@ -842,20 +1075,20 @@
* @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
* @retval None.
*/
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); } while(0);
/**
* @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
* This parameter can be:
* @retval None.
*/
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); } while(0);
/**
* @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
* @retval Line Status.
*/
-#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
/**
* @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
@@ -868,22 +1101,70 @@
* @retval None.
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+/**
+ * @}
+ */
+/* ------------------------------Calibration----------------------------------*/
+/** @defgroup RTCEx_Calibration RTC Calibration
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+ * @brief Disable the calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+ * @brief Enable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+ * @brief Disable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+ * @brief Get the selected RTC shift operation's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_SHPF
+ * @retval None
+ */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+/**
+ * @}
+ */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Functions RTC Extended Exported Functions
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
* @{
*/
+/* RTC TimeStamp and Tamper functions *****************************************/
/** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp and Tamper functions
* @{
*/
-/* RTC TimeStamp and Tamper functions *****************************************/
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
@@ -898,12 +1179,14 @@
void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
- defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx)
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
- * (STM32L073xx) || (STM32L072xx) || (STM32L071xx)
+ * (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
+ * (STM32L011xx) || (STM32L021xx)
*/
void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
@@ -912,27 +1195,29 @@
HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
- defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx)
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
- * (STM32L073xx) || (STM32L072xx) || (STM32L071xx)
+ * (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
+ * (STM32L011xx) || (STM32L021xx)
*/
/**
* @}
*/
+/* RTC Wake-up functions ******************************************************/
/** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions
* @{
*/
-/* RTC Wake-up functions ******************************************************/
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
-uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
-uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
@@ -940,15 +1225,15 @@
* @}
*/
+/* Extended Control functions ************************************************/
/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions
* @{
*/
-/* Extended Control functions ************************************************/
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
-HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue);
HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
@@ -966,6 +1251,175 @@
*/
void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
+ * @{
+ */
+
+/* Masks Definition */
+
+#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
+ defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx)
+
+#define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP2F | RTC_FLAG_TAMP1F| \
+ RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
+ RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | \
+ RTC_FLAG_INITF | RTC_FLAG_RSF | RTC_FLAG_INITS | \
+ RTC_FLAG_SHPF | RTC_FLAG_WUTWF |RTC_FLAG_ALRBWF | \
+ RTC_FLAG_ALRAWF))
+
+#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP2E | RTC_TAMPCR_TAMP1E))
+#define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER1_INTERRUPT | RTC_TAMPER2_INTERRUPT | \
+ RTC_ALL_TAMPER_INTERRUPT))
+
+#elif defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
+ defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
+ defined (STM32L031xx) || defined (STM32L041xx)
+
+#define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP3F | RTC_FLAG_TAMP2F | \
+ RTC_FLAG_TAMP1F| RTC_FLAG_TSOVF | RTC_FLAG_TSF | \
+ RTC_FLAG_WUTF | RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | \
+ RTC_FLAG_INITF | RTC_FLAG_RSF | \
+ RTC_FLAG_INITS | RTC_FLAG_SHPF | RTC_FLAG_WUTWF | \
+ RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF))
+
+#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP3E | RTC_TAMPCR_TAMP2E | RTC_TAMPCR_TAMP1E))
+#define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER1_INTERRUPT | RTC_TAMPER2_INTERRUPT | \
+ RTC_TAMPER3_INTERRUPT | RTC_ALL_TAMPER_INTERRUPT))
+
+#elif defined (STM32L011xx) || defined (STM32L021xx)
+
+#define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP3F | RTC_FLAG_TAMP2F | \
+ RTC_FLAG_TSOVF | RTC_FLAG_TSF | \
+ RTC_FLAG_WUTF | RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | \
+ RTC_FLAG_INITF | RTC_FLAG_RSF | \
+ RTC_FLAG_INITS | RTC_FLAG_SHPF | RTC_FLAG_WUTWF | \
+ RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF))
+
+#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP3E | RTC_TAMPCR_TAMP2E))
+#define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER2_INTERRUPT | \
+ RTC_TAMPER3_INTERRUPT | RTC_ALL_TAMPER_INTERRUPT))
+#endif /* (STM32L011xx) || (STM32L021xx)
+ */
+
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_IM19) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_IM20) /*!< External interrupt line 20 Connected to the RTC Wakeup event */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
+ * @{
+ */
+
+/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
+ * @{
+ */
+
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMB) || \
+ ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+
+#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER)
+
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)(0xFFFFFFFF ^ RTC_TAMPCR_TAMPXE))) == 0x00) && ((TAMPER) != (uint32_t)RESET))
+
+#define IS_RTC_TAMPER_INTERRUPT(INTERRUPT) ((((INTERRUPT) & (uint32_t)(0xFFFFFFFF ^ RTC_TAMPCR_TAMPXIE)) == 0x00) && ((INTERRUPT) != (uint32_t)RESET))
+
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT))
+
+#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+
+#define IS_RTC_TAMPER_ERASE_MODE(MODE) (((MODE) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \
+ ((MODE) == RTC_TAMPER_ERASE_BACKUP_DISABLE))
+
+#define IS_RTC_TAMPER_MASKFLAG_STATE(STATE) (((STATE) == RTC_TAMPERMASK_FLAG_ENABLE) || \
+ ((STATE) == RTC_TAMPERMASK_FLAG_DISABLE))
+
+#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+
+#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+
+#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+
+#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+
+#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+ ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+
+#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= RTC_WUTR_WUT)
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+
+
+/** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions RTCEx Smooth calib Minus pulses Definitions
+ * @{
+ */
+#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM)
+/**
+ * @}
+ */
+
+
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+ ((SEL) == RTC_SHIFTADD1S_SET))
+
+
+
+/** @defgroup RTCEx_Substract_Fraction_Of_Second_Value RTCEx Substract Fraction Of Second Value
+ * @{
+ */
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS)
+/**
+ * @}
+ */
+#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
/**
* @}
@@ -975,6 +1429,8 @@
* @}
*/
+
+
/**
* @}
*/