en 129
fix LPC812 PWM
Fork of
mbed-dev
by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_adc.h
- Revision:
- 83:a036322b8637
- Parent:
- 0:9b334a45a8ff
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_adc.h Sat Mar 05 06:00:11 2016 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_adc.h Mon Mar 07 10:00:14 2016 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f7xx_hal_adc.h
* @author MCD Application Team
- * @version V1.0.1
- * @date 25-June-2015
+ * @version V1.0.4
+ * @date 09-December-2015
* @brief Header file of ADC HAL extension module.
******************************************************************************
* @attention
@@ -58,105 +58,97 @@
/** @defgroup ADC_Exported_Types ADC Exported Types
* @{
*/
-
-/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_ADC_STATE_RESET = 0x00, /*!< ADC not yet initialized or disabled */
- HAL_ADC_STATE_READY = 0x01, /*!< ADC peripheral ready for use */
- HAL_ADC_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
- HAL_ADC_STATE_BUSY_REG = 0x12, /*!< Regular conversion is ongoing */
- HAL_ADC_STATE_BUSY_INJ = 0x22, /*!< Injected conversion is ongoing */
- HAL_ADC_STATE_BUSY_INJ_REG = 0x32, /*!< Injected and regular conversion are ongoing */
- HAL_ADC_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_ADC_STATE_ERROR = 0x04, /*!< ADC state error */
- HAL_ADC_STATE_EOC = 0x05, /*!< Conversion is completed */
- HAL_ADC_STATE_EOC_REG = 0x15, /*!< Regular conversion is completed */
- HAL_ADC_STATE_EOC_INJ = 0x25, /*!< Injected conversion is completed */
- HAL_ADC_STATE_EOC_INJ_REG = 0x35, /*!< Injected and regular conversion are completed */
- HAL_ADC_STATE_AWD = 0x06 /*!< ADC state analog watchdog */
-
-}HAL_ADC_StateTypeDef;
/**
- * @brief ADC Init structure definition
- */
+ * @brief Structure definition of ADC and regular group initialization
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope entire ADC (affects regular and injected groups): ClockPrescaler, Resolution, ScanConvMode, DataAlign, ScanConvMode, EOCSelection, LowPowerAutoWait, LowPowerAutoPowerOff, ChannelsBank.
+ * - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv.
+ * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled
+ * - For all parameters except 'Resolution', 'ScanConvMode', 'DiscontinuousConvMode', 'NbrOfDiscConversion' : ADC enabled without conversion on going on regular group.
+ * - For parameters 'ExternalTrigConv' and 'ExternalTrigConvEdge': ADC enabled, even with conversion on going.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fullfills the ADC state condition) on the fly).
+ */
typedef struct
{
- uint32_t ClockPrescaler; /*!< Select the frequency of the clock to the ADC. The clock is common for
+ uint32_t ClockPrescaler; /*!< Select ADC clock prescaler. The clock is common for
all the ADCs.
This parameter can be a value of @ref ADC_ClockPrescaler */
- uint32_t Resolution; /*!< Configures the ADC resolution dual mode.
+ uint32_t Resolution; /*!< Configures the ADC resolution.
This parameter can be a value of @ref ADC_Resolution */
- uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right.
+ uint32_t DataAlign; /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting)
+ or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3).
This parameter can be a value of @ref ADC_data_align */
- uint32_t ScanConvMode; /*!< Specifies whether the conversion is performed in Scan (multi channels) or
- Single (one channel) mode.
- This parameter can be set to ENABLE or DISABLE */
- uint32_t EOCSelection; /*!< Specifies whether the EOC flag is set
- at the end of single channel conversion or at the end of all conversions.
- This parameter can be a value of @ref ADC_EOCSelection */
- uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in Continuous or Single mode.
+ uint32_t ScanConvMode; /*!< Configures the sequencer of regular and injected groups.
+ This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+ If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
+ Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
+ If enabled: Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
+ Scan direction is upward: from rank1 to rank 'n'. */
+ uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence.
+ This parameter can be a value of @ref ADC_EOCSelection.
+ Note: For injected group, end of conversion (flag&IT) is raised only at the end of the sequence.
+ Therefore, if end of conversion is set to end of each conversion, injected group should not be used with interruption (HAL_ADCEx_InjectedStart_IT)
+ or polling (HAL_ADCEx_InjectedStart and HAL_ADCEx_InjectedPollForConversion). By the way, polling is still possible since driver will use an estimated timing for end of injected conversion.
+ Note: If overrun feature is intended to be used, use ADC in mode 'interruption' (function HAL_ADC_Start_IT() ) with parameter EOCSelection set to end of each conversion or in mode 'transfer by DMA' (function HAL_ADC_Start_DMA()).
+ If overrun feature is intended to be bypassed, use ADC in mode 'polling' or 'interruption' with parameter EOCSelection must be set to end of sequence */
+ uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+ after the selected trigger occurred (software start or external trigger).
This parameter can be set to ENABLE or DISABLE. */
- uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests is performed in Continuous or in Single mode.
- This parameter can be set to ENABLE or DISABLE. */
- uint32_t NbrOfConversion; /*!< Specifies the number of ADC conversions that will be done using the sequencer for
- regular channel group.
+ uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
+ To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
- uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversion is performed in Discontinuous or not
- for regular channels.
+ uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
This parameter can be set to ENABLE or DISABLE. */
- uint32_t NbrOfDiscConversion; /*!< Specifies the number of ADC discontinuous conversions that will be done
- using the sequencer for regular channel group.
+ uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of regular group (parameter NbrOfConversion) will be subdivided.
+ If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
If set to ADC_SOFTWARE_START, external triggers are disabled.
- This parameter can be a value of @ref ADC_External_trigger_Source_Regular
- Note: This parameter can be modified only if there is no conversion is ongoing. */
+ If set to external trigger source, triggering is on event rising edge by default.
+ This parameter can be a value of @ref ADC_External_trigger_Source_Regular */
uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group.
If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
- This parameter can be a value of @ref ADC_External_trigger_edge_Regular
- Note: This parameter can be modified only if there is no conversion is ongoing. */
+ This parameter can be a value of @ref ADC_External_trigger_edge_Regular */
+ uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
+ or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
+ Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached.
+ Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could launch a conversion).
+ This parameter can be set to ENABLE or DISABLE. */
}ADC_InitTypeDef;
+
+
/**
- * @brief ADC handle Structure definition
- */
-typedef struct
-{
- ADC_TypeDef *Instance; /*!< Register base address */
-
- ADC_InitTypeDef Init; /*!< ADC required parameters */
-
- __IO uint32_t NbrOfCurrentConversionRank; /*!< ADC number of current conversion rank */
-
- DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
-
- HAL_LockTypeDef Lock; /*!< ADC locking object */
-
- __IO HAL_ADC_StateTypeDef State; /*!< ADC communication state */
-
- __IO uint32_t ErrorCode; /*!< ADC Error code */
-}ADC_HandleTypeDef;
-
-/**
- * @brief ADC Configuration regular Channel structure definition
+ * @brief Structure definition of ADC channel for regular group
+ * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
+ * ADC can be either disabled or enabled without conversion on going on regular group.
*/
typedef struct
{
- uint32_t Channel; /*!< The ADC channel to configure.
- This parameter can be a value of @ref ADC_channels */
- uint32_t Rank; /*!< The rank in the regular group sequencer.
- This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
- uint32_t SamplingTime; /*!< The sample time value to be set for the selected channel.
- This parameter can be a value of @ref ADC_sampling_times */
- uint32_t Offset; /*!< Reserved for future use, can be set to 0 */
+ uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group.
+ This parameter can be a value of @ref ADC_channels */
+ uint32_t Rank; /*!< Specifies the rank in the regular group sequencer.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+ uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
+ This parameter can be a value of @ref ADC_sampling_times
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
+ uint32_t Offset; /*!< Reserved for future use, can be set to 0 */
}ADC_ChannelConfTypeDef;
/**
- * @brief ADC Configuration multi-mode structure definition
+ * @brief ADC Configuration multi-mode structure definition
*/
typedef struct
{
@@ -174,30 +166,83 @@
This parameter can be set to ENABLE or DISABLE */
uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */
}ADC_AnalogWDGConfTypeDef;
+
+/**
+ * @brief HAL ADC state machine: ADC states definition (bitfields)
+ */
+/* States of ADC global scope */
+#define HAL_ADC_STATE_RESET ((uint32_t)0x00000000) /*!< ADC not yet initialized or disabled */
+#define HAL_ADC_STATE_READY ((uint32_t)0x00000001) /*!< ADC peripheral ready for use */
+#define HAL_ADC_STATE_BUSY_INTERNAL ((uint32_t)0x00000002) /*!< ADC is busy to internal process (initialization, calibration) */
+#define HAL_ADC_STATE_TIMEOUT ((uint32_t)0x00000004) /*!< TimeOut occurrence */
+
+/* States of ADC errors */
+#define HAL_ADC_STATE_ERROR_INTERNAL ((uint32_t)0x00000010) /*!< Internal error occurrence */
+#define HAL_ADC_STATE_ERROR_CONFIG ((uint32_t)0x00000020) /*!< Configuration error occurrence */
+#define HAL_ADC_STATE_ERROR_DMA ((uint32_t)0x00000040) /*!< DMA error occurrence */
+
+/* States of ADC group regular */
+#define HAL_ADC_STATE_REG_BUSY ((uint32_t)0x00000100) /*!< A conversion on group regular is ongoing or can occur (either by continuous mode,
+ external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */
+#define HAL_ADC_STATE_REG_EOC ((uint32_t)0x00000200) /*!< Conversion data available on group regular */
+#define HAL_ADC_STATE_REG_OVR ((uint32_t)0x00000400) /*!< Overrun occurrence */
+
+/* States of ADC group injected */
+#define HAL_ADC_STATE_INJ_BUSY ((uint32_t)0x00001000) /*!< A conversion on group injected is ongoing or can occur (either by auto-injection mode,
+ external trigger, low power auto power-on (if feature available), multimode ADC master control (if feature available)) */
+#define HAL_ADC_STATE_INJ_EOC ((uint32_t)0x00002000) /*!< Conversion data available on group injected */
+
+/* States of ADC analog watchdogs */
+#define HAL_ADC_STATE_AWD1 ((uint32_t)0x00010000) /*!< Out-of-window occurrence of analog watchdog 1 */
+#define HAL_ADC_STATE_AWD2 ((uint32_t)0x00020000) /*!< Not available on STM32F7 device: Out-of-window occurrence of analog watchdog 2 */
+#define HAL_ADC_STATE_AWD3 ((uint32_t)0x00040000) /*!< Not available on STM32F7 device: Out-of-window occurrence of analog watchdog 3 */
+
+/* States of ADC multi-mode */
+#define HAL_ADC_STATE_MULTIMODE_SLAVE ((uint32_t)0x00100000) /*!< Not available on STM32F4 device: ADC in multimode slave state, controlled by another ADC master ( */
+
+
+/**
+ * @brief ADC handle Structure definition
+ */
+typedef struct
+{
+ ADC_TypeDef *Instance; /*!< Register base address */
+
+ ADC_InitTypeDef Init; /*!< ADC required parameters */
+
+ __IO uint32_t NbrOfCurrentConversionRank; /*!< ADC number of current conversion rank */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
+
+ HAL_LockTypeDef Lock; /*!< ADC locking object */
+
+ __IO uint32_t State; /*!< ADC communication state */
+
+ __IO uint32_t ErrorCode; /*!< ADC Error code */
+}ADC_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
-
/** @defgroup ADC_Exported_Constants ADC Exported Constants
* @{
*/
-
/** @defgroup ADC_Error_Code ADC Error Code
* @{
- */
-
-#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */
-#define HAL_ADC_ERROR_OVR ((uint32_t)0x01) /*!< OVR error */
-#define HAL_ADC_ERROR_DMA ((uint32_t)0x02) /*!< DMA transfer error */
+ */
+#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */
+#define HAL_ADC_ERROR_INTERNAL ((uint32_t)0x01) /*!< ADC IP internal error: if problem of clocking,
+ enable/disable, erroneous state */
+#define HAL_ADC_ERROR_OVR ((uint32_t)0x02) /*!< Overrun error */
+#define HAL_ADC_ERROR_DMA ((uint32_t)0x04) /*!< DMA transfer error */
/**
* @}
- */
+ */
-/** @defgroup ADC_ClockPrescaler ADC Clock Prescaler
+/** @defgroup ADC_ClockPrescaler ADC Clock Prescaler
* @{
*/
#define ADC_CLOCK_SYNC_PCLK_DIV2 ((uint32_t)0x00000000)
@@ -258,6 +303,8 @@
*/
/* Note: Parameter ADC_SOFTWARE_START is a software parameter used for */
/* compatibility with other STM32 devices. */
+
+
#define ADC_EXTERNALTRIGCONV_T1_CC1 ((uint32_t)0x00000000)
#define ADC_EXTERNALTRIGCONV_T1_CC2 ((uint32_t)ADC_CR2_EXTSEL_0)
#define ADC_EXTERNALTRIGCONV_T1_CC3 ((uint32_t)ADC_CR2_EXTSEL_1)
@@ -275,11 +322,12 @@
#define ADC_EXTERNALTRIGCONV_EXT_IT11 ((uint32_t)ADC_CR2_EXTSEL)
#define ADC_SOFTWARE_START ((uint32_t)ADC_CR2_EXTSEL + 1)
+
/**
* @}
*/
-/** @defgroup ADC_data_align ADC Data Align
+/** @defgroup ADC_data_align ADC Data Align
* @{
*/
#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000)
@@ -533,8 +581,8 @@
* @{
*/
/* Peripheral State functions ***************************************************/
-HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
-uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+uint32_t HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
/**
* @}
*/
@@ -565,6 +613,52 @@
/** @defgroup ADC_Private_Macros ADC Private Macros
* @{
*/
+/* Macro reserved for internal HAL driver usage, not intended to be used in
+ code of final user */
+
+/**
+ * @brief Verification of ADC state: enabled or disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC enabled) or RESET (ADC disabled)
+ */
+#define ADC_IS_ENABLE(__HANDLE__) \
+ ((( ((__HANDLE__)->Instance->SR & ADC_SR_ADONS) == ADC_SR_ADONS ) \
+ ) ? SET : RESET)
+
+/**
+ * @brief Test if conversion trigger of regular group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \
+ (((__HANDLE__)->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
+
+/**
+ * @brief Test if conversion trigger of injected group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \
+ (((__HANDLE__)->Instance->CR2 & ADC_CR2_JEXTEN) == RESET)
+
+/**
+ * @brief Simultaneously clears and sets specific bits of the handle State
+ * @note: ADC_STATE_CLR_SET() macro is merely aliased to generic macro MODIFY_REG(),
+ * the first parameter is the ADC handle State, the second parameter is the
+ * bit field to clear, the third and last parameter is the bit field to set.
+ * @retval None
+ */
+#define ADC_STATE_CLR_SET MODIFY_REG
+
+/**
+ * @brief Clear ADC error code (set it to error code: "no error")
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define ADC_CLEAR_ERRORCODE(__HANDLE__) \
+ ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
#define IS_ADC_CLOCKPRESCALER(__ADC_CLOCK__) (((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV2) || \
((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV4) || \
((__ADC_CLOCK__) == ADC_CLOCK_SYNC_PCLK_DIV6) || \