fix LPC812 PWM
Fork of mbed-dev by
Diff: targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_ll_fsmc.c
- Revision:
- 0:9b334a45a8ff
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/stm32l1xx_ll_fsmc.c Thu Oct 01 15:25:22 2015 +0300 @@ -0,0 +1,359 @@ +/** + ****************************************************************************** + * @file stm32l1xx_ll_fsmc.c + * @author MCD Application Team + * @version V1.0.0 + * @date 5-September-2014 + * @brief FSMC Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the Flexible Static Memory Controller (FSMC) peripheral memories: + * + Initialization/de-initialization functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================= + ##### FSMC peripheral features ##### + ============================================================================= + [..] The Flexible static memory controller (FSMC) includes following memory controllers: + (+) The NOR/PSRAM memory controller + + [..] The FSMC functional block makes the interface with synchronous and asynchronous static + memories and SDRAM memories. Its main purposes are: + (+) to translate AHB transactions into the appropriate external device protocol. + (+) to meet the access time requirements of the external memory devices. + + [..] All external memories share the addresses, data and control signals with the controller. + Each external device is accessed by means of a unique Chip Select. The FSMC performs + only one access at a time to an external device. + The main features of the FSMC controller are the following: + (+) Interface with static-memory mapped devices including: + (++) Static random access memory (SRAM). + (++) NOR Flash memory. + (++) PSRAM (4 memory banks). + (+) Independent Chip Select control for each memory bank. + (+) Independent configuration for each memory bank. + + ============================================================================= + ##### How to use NORSRAM device driver ##### + ============================================================================= + + [..] + This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order + to run the NORSRAM external devices. + + (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit() + (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init() + (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init() + (+) FSMC NORSRAM bank extended timing configuration using the function + FSMC_NORSRAM_Extended_Timing_Init() + (+) FSMC NORSRAM bank enable/disable write operation using the functions + FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable() + + @endverbatim + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_hal.h" + +/** @addtogroup STM32L1xx_HAL_Driver + * @{ + */ + +/** @defgroup FSMC_LL FSMC_LL + * @brief FSMC driver modules + * @{ + */ + +#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup FSMC_Exported_Functions FSMC Exported Functions + * @{ + */ + +/** @defgroup HAL_FSMC_NORSRAM_Group1 Initialization/de-initialization functions + * @brief Initialization and Configuration functions + * + @verbatim + ============================================================================== + ##### Initialization and de_initialization functions ##### + ============================================================================== + [..] + This section provides functions allowing to: + (+) Initialize and configure the FSMC NORSRAM interface + (+) De-initialize the FSMC NORSRAM interface + (+) Configure the FSMC clock and associated GPIOs + +@endverbatim + * @{ + */ + +/** + * @brief Initialize the FSMC_NORSRAM device according to the specified + * control parameters in the FSMC_NORSRAM_InitTypeDef + * @param Device: Pointer to NORSRAM device instance + * @param Init: Pointer to NORSRAM Initialization structure + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TYPEDEF *Device, FSMC_NORSRAM_InitTypeDef* Init) +{ + uint32_t tmpr = 0; + + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank)); + assert_param(IS_FSMC_MUX(Init->DataAddressMux)); + assert_param(IS_FSMC_MEMORY(Init->MemoryType)); + assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth)); + assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode)); + assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity)); + assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode)); + assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive)); + assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation)); + assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal)); + assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode)); + assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait)); + assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst)); + + /* Set NORSRAM device control parameters */ + tmpr = (uint32_t)(Init->DataAddressMux |\ + Init->MemoryType |\ + Init->MemoryDataWidth |\ + Init->BurstAccessMode |\ + Init->WaitSignalPolarity |\ + Init->WrapMode |\ + Init->WaitSignalActive |\ + Init->WriteOperation |\ + Init->WaitSignal |\ + Init->ExtendedMode |\ + Init->AsynchronousWait |\ + Init->WriteBurst + ); + + if(Init->MemoryType == FSMC_MEMORY_TYPE_NOR) + { + tmpr |= (uint32_t)FSMC_NORSRAM_FLASH_ACCESS_ENABLE; + } + + Device->BTCR[Init->NSBank] = tmpr; + + return HAL_OK; +} + + +/** + * @brief DeInitialize the FSMC_NORSRAM peripheral + * @param Device: Pointer to NORSRAM device instance + * @param ExDevice: Pointer to NORSRAM extended mode device instance + * @param Bank: NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TYPEDEF *Device, FSMC_NORSRAM_EXTENDED_TYPEDEF *ExDevice, uint32_t Bank) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_DEVICE(Device)); + assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice)); + + /* Disable the FSMC_NORSRAM device */ + __FSMC_NORSRAM_DISABLE(Device, Bank); + + /* De-initialize the FSMC_NORSRAM device */ + /* FSMC_NORSRAM_BANK1 */ + if(Bank == FSMC_BANK1_NORSRAM1) + { + Device->BTCR[Bank] = 0x000030DB; + } + /* FSMC_BANK1_NORSRAM2, FSMC_BANK1_NORSRAM3 or FSMC_BANK1_NORSRAM4 */ + else + { + Device->BTCR[Bank] = 0x000030D2; + } + + Device->BTCR[Bank + 1] = 0x0FFFFFFF; + ExDevice->BWTR[Bank] = 0x0FFFFFFF; + + return HAL_OK; +} + + +/** + * @brief Initialize the FSMC_NORSRAM Timing according to the specified + * parameters in the FSMC_NORSRAM_TimingTypeDef + * @param Device: Pointer to NORSRAM device instance + * @param Timing: Pointer to NORSRAM Timing structure + * @param Bank: NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TYPEDEF *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank) +{ + uint32_t tmpr = 0; + + /* Check the parameters */ + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); + assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode)); + + /* Set FSMC_NORSRAM device timing parameters */ + tmpr = (uint32_t)(Timing->AddressSetupTime |\ + ((Timing->AddressHoldTime) << POSITION_VAL(FSMC_BTRx_ADDHLD)) |\ + ((Timing->DataSetupTime) << POSITION_VAL(FSMC_BTRx_DATAST)) |\ + ((Timing->BusTurnAroundDuration) << POSITION_VAL(FSMC_BTRx_BUSTURN)) |\ + (((Timing->CLKDivision)-1) << POSITION_VAL(FSMC_BTRx_CLKDIV)) |\ + (((Timing->DataLatency)-2) << POSITION_VAL(FSMC_BTRx_DATLAT)) |\ + (Timing->AccessMode) + ); + + Device->BTCR[Bank + 1] = tmpr; + + return HAL_OK; +} + +/** + * @brief Initialize the FSMC_NORSRAM Extended mode Timing according to the specified + * parameters in the FSMC_NORSRAM_TimingTypeDef + * @param Device: Pointer to NORSRAM device instance + * @param Timing: Pointer to NORSRAM Timing structure + * @param Bank: NORSRAM bank number + * @param ExtendedMode: FSMC Extended Mode + * This parameter can be one of the following values: + * @arg FSMC_EXTENDED_MODE_DISABLE + * @arg FSMC_EXTENDED_MODE_ENABLE + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TYPEDEF *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode) +{ + /* Set NORSRAM device timing register for write configuration, if extended mode is used */ + if(ExtendedMode == FSMC_EXTENDED_MODE_ENABLE) + { + /* Check the parameters */ + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); + assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode)); + + Device->BWTR[Bank] = (uint32_t)(Timing->AddressSetupTime |\ + ((Timing->AddressHoldTime) << POSITION_VAL(FSMC_BWTRx_ADDHLD)) |\ + ((Timing->DataSetupTime) << POSITION_VAL(FSMC_BWTRx_DATAST)) |\ + ((Timing->BusTurnAroundDuration) << POSITION_VAL(FSMC_BWTRx_BUSTURN)) |\ + (Timing->AccessMode)); + } + else + { + Device->BWTR[Bank] = 0x0FFFFFFF; + } + + return HAL_OK; +} + + +/** + * @} + */ + + +/** @defgroup HAL_FSMC_NORSRAM_Group2 Control functions + * @brief management functions + * +@verbatim + ============================================================================== + ##### FSMC_NORSRAM Control functions ##### + ============================================================================== + [..] + This subsection provides a set of functions allowing to control dynamically + the FSMC NORSRAM interface. + +@endverbatim + * @{ + */ + +/** + * @brief Enables dynamically FSMC_NORSRAM write operation. + * @param Device: Pointer to NORSRAM device instance + * @param Bank: NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TYPEDEF *Device, uint32_t Bank) +{ + /* Enable write operation */ + Device->BTCR[Bank] |= FSMC_WRITE_OPERATION_ENABLE; + + return HAL_OK; +} + +/** + * @brief Disables dynamically FSMC_NORSRAM write operation. + * @param Device: Pointer to NORSRAM device instance + * @param Bank: NORSRAM bank number + * @retval HAL status + */ +HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TYPEDEF *Device, uint32_t Bank) +{ + /* Disable write operation */ + Device->BTCR[Bank] &= ~FSMC_WRITE_OPERATION_ENABLE; + + return HAL_OK; +} + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +#endif /* HAL_FSMC_MODULE_ENABLED */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/