en 129 / mbed-dev

fix LPC812 PWM

Dependents:   IR_LED_Send

Fork of mbed-dev by mbed official

targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_pwr_ex.c@0:9b334a45a8ff, 2015-10-01 (annotated)

Committer:
bogdanm
Date:
Thu Oct 01 15:25:22 2015 +0300
Revision:
0:9b334a45a8ff
Initial commit on mbed-dev



Replaces mbed-src (now inactive)

Who changed what in which revision?

UserRevisionLine numberNew contents of line
bogdanm 0:9b334a45a8ff 1 /**
bogdanm 0:9b334a45a8ff 2 ******************************************************************************
bogdanm 0:9b334a45a8ff 3 * @file stm32f0xx_hal_pwr_ex.c
bogdanm 0:9b334a45a8ff 4 * @author MCD Application Team
bogdanm 0:9b334a45a8ff 5 * @version V1.3.0
bogdanm 0:9b334a45a8ff 6 * @date 26-June-2015
bogdanm 0:9b334a45a8ff 7 * @brief Extended PWR HAL module driver.
bogdanm 0:9b334a45a8ff 8 * This file provides firmware functions to manage the following
bogdanm 0:9b334a45a8ff 9 * functionalities of the Power Controller (PWR) peripheral:
bogdanm 0:9b334a45a8ff 10 * + Extended Initialization and de-initialization functions
bogdanm 0:9b334a45a8ff 11 * + Extended Peripheral Control functions
bogdanm 0:9b334a45a8ff 12 *
bogdanm 0:9b334a45a8ff 13 ******************************************************************************
bogdanm 0:9b334a45a8ff 14 * @attention
bogdanm 0:9b334a45a8ff 15 *
bogdanm 0:9b334a45a8ff 16 * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
bogdanm 0:9b334a45a8ff 17 *
bogdanm 0:9b334a45a8ff 18 * Redistribution and use in source and binary forms, with or without modification,
bogdanm 0:9b334a45a8ff 19 * are permitted provided that the following conditions are met:
bogdanm 0:9b334a45a8ff 20 * 1. Redistributions of source code must retain the above copyright notice,
bogdanm 0:9b334a45a8ff 21 * this list of conditions and the following disclaimer.
bogdanm 0:9b334a45a8ff 22 * 2. Redistributions in binary form must reproduce the above copyright notice,
bogdanm 0:9b334a45a8ff 23 * this list of conditions and the following disclaimer in the documentation
bogdanm 0:9b334a45a8ff 24 * and/or other materials provided with the distribution.
bogdanm 0:9b334a45a8ff 25 * 3. Neither the name of STMicroelectronics nor the names of its contributors
bogdanm 0:9b334a45a8ff 26 * may be used to endorse or promote products derived from this software
bogdanm 0:9b334a45a8ff 27 * without specific prior written permission.
bogdanm 0:9b334a45a8ff 28 *
bogdanm 0:9b334a45a8ff 29 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
bogdanm 0:9b334a45a8ff 30 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
bogdanm 0:9b334a45a8ff 31 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
bogdanm 0:9b334a45a8ff 32 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
bogdanm 0:9b334a45a8ff 33 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
bogdanm 0:9b334a45a8ff 34 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
bogdanm 0:9b334a45a8ff 35 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
bogdanm 0:9b334a45a8ff 36 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
bogdanm 0:9b334a45a8ff 37 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
bogdanm 0:9b334a45a8ff 38 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
bogdanm 0:9b334a45a8ff 39 *
bogdanm 0:9b334a45a8ff 40 ******************************************************************************
bogdanm 0:9b334a45a8ff 41 */
bogdanm 0:9b334a45a8ff 42
bogdanm 0:9b334a45a8ff 43 /* Includes ------------------------------------------------------------------*/
bogdanm 0:9b334a45a8ff 44 #include "stm32f0xx_hal.h"
bogdanm 0:9b334a45a8ff 45
bogdanm 0:9b334a45a8ff 46 /** @addtogroup STM32F0xx_HAL_Driver
bogdanm 0:9b334a45a8ff 47 * @{
bogdanm 0:9b334a45a8ff 48 */
bogdanm 0:9b334a45a8ff 49
bogdanm 0:9b334a45a8ff 50 /** @defgroup PWREx PWREx
bogdanm 0:9b334a45a8ff 51 * @brief PWREx HAL module driver
bogdanm 0:9b334a45a8ff 52 * @{
bogdanm 0:9b334a45a8ff 53 */
bogdanm 0:9b334a45a8ff 54
bogdanm 0:9b334a45a8ff 55 #ifdef HAL_PWR_MODULE_ENABLED
bogdanm 0:9b334a45a8ff 56
bogdanm 0:9b334a45a8ff 57 /* Private typedef -----------------------------------------------------------*/
bogdanm 0:9b334a45a8ff 58 /* Private define ------------------------------------------------------------*/
bogdanm 0:9b334a45a8ff 59 /** @defgroup PWREx_Private_Constants PWREx Private Constants
bogdanm 0:9b334a45a8ff 60 * @{
bogdanm 0:9b334a45a8ff 61 */
bogdanm 0:9b334a45a8ff 62 #define PVD_MODE_IT ((uint32_t)0x00010000)
bogdanm 0:9b334a45a8ff 63 #define PVD_MODE_EVT ((uint32_t)0x00020000)
bogdanm 0:9b334a45a8ff 64 #define PVD_RISING_EDGE ((uint32_t)0x00000001)
bogdanm 0:9b334a45a8ff 65 #define PVD_FALLING_EDGE ((uint32_t)0x00000002)
bogdanm 0:9b334a45a8ff 66 /**
bogdanm 0:9b334a45a8ff 67 * @}
bogdanm 0:9b334a45a8ff 68 */
bogdanm 0:9b334a45a8ff 69
bogdanm 0:9b334a45a8ff 70 /* Private macro -------------------------------------------------------------*/
bogdanm 0:9b334a45a8ff 71 /* Private variables ---------------------------------------------------------*/
bogdanm 0:9b334a45a8ff 72 /* Private function prototypes -----------------------------------------------*/
bogdanm 0:9b334a45a8ff 73 /* Exported functions ---------------------------------------------------------*/
bogdanm 0:9b334a45a8ff 74
bogdanm 0:9b334a45a8ff 75 /** @defgroup PWREx_Exported_Functions PWREx Exported Functions
bogdanm 0:9b334a45a8ff 76 * @{
bogdanm 0:9b334a45a8ff 77 */
bogdanm 0:9b334a45a8ff 78
bogdanm 0:9b334a45a8ff 79 /** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions
bogdanm 0:9b334a45a8ff 80 * @brief Extended Peripheral Control functions
bogdanm 0:9b334a45a8ff 81 *
bogdanm 0:9b334a45a8ff 82 @verbatim
bogdanm 0:9b334a45a8ff 83
bogdanm 0:9b334a45a8ff 84 ===============================================================================
bogdanm 0:9b334a45a8ff 85 ##### Peripheral extended control functions #####
bogdanm 0:9b334a45a8ff 86 ===============================================================================
bogdanm 0:9b334a45a8ff 87
bogdanm 0:9b334a45a8ff 88 *** PVD configuration ***
bogdanm 0:9b334a45a8ff 89 =========================
bogdanm 0:9b334a45a8ff 90 [..]
bogdanm 0:9b334a45a8ff 91 (+) The PVD is used to monitor the VDD power supply by comparing it to a
bogdanm 0:9b334a45a8ff 92 threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
bogdanm 0:9b334a45a8ff 93 (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
bogdanm 0:9b334a45a8ff 94 than the PVD threshold. This event is internally connected to the EXTI
bogdanm 0:9b334a45a8ff 95 line16 and can generate an interrupt if enabled. This is done through
bogdanm 0:9b334a45a8ff 96 HAL_PWR_ConfigPVD(), HAL_PWR_EnablePVD() functions.
bogdanm 0:9b334a45a8ff 97 (+) The PVD is stopped in Standby mode.
bogdanm 0:9b334a45a8ff 98 -@- PVD is not available on STM32F030x4/x6/x8
bogdanm 0:9b334a45a8ff 99
bogdanm 0:9b334a45a8ff 100 *** VDDIO2 Monitor Configuration ***
bogdanm 0:9b334a45a8ff 101 ====================================
bogdanm 0:9b334a45a8ff 102 [..]
bogdanm 0:9b334a45a8ff 103 (+) VDDIO2 monitor is used to monitor the VDDIO2 power supply by comparing it
bogdanm 0:9b334a45a8ff 104 to VREFInt Voltage
bogdanm 0:9b334a45a8ff 105 (+) This monitor is internally connected to the EXTI line31
bogdanm 0:9b334a45a8ff 106 and can generate an interrupt if enabled. This is done through
bogdanm 0:9b334a45a8ff 107 HAL_PWREx_EnableVddio2Monitor() function.
bogdanm 0:9b334a45a8ff 108 -@- VDDIO2 is available on STM32F07x/09x/04x
bogdanm 0:9b334a45a8ff 109
bogdanm 0:9b334a45a8ff 110 @endverbatim
bogdanm 0:9b334a45a8ff 111 * @{
bogdanm 0:9b334a45a8ff 112 */
bogdanm 0:9b334a45a8ff 113
bogdanm 0:9b334a45a8ff 114 #if defined (STM32F031x6) || defined (STM32F051x8) || \
bogdanm 0:9b334a45a8ff 115 defined (STM32F071xB) || defined (STM32F091xC) || \
bogdanm 0:9b334a45a8ff 116 defined (STM32F042x6) || defined (STM32F072xB)
bogdanm 0:9b334a45a8ff 117 /**
bogdanm 0:9b334a45a8ff 118 * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
bogdanm 0:9b334a45a8ff 119 * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration
bogdanm 0:9b334a45a8ff 120 * information for the PVD.
bogdanm 0:9b334a45a8ff 121 * @note Refer to the electrical characteristics of your device datasheet for
bogdanm 0:9b334a45a8ff 122 * more details about the voltage threshold corresponding to each
bogdanm 0:9b334a45a8ff 123 * detection level.
bogdanm 0:9b334a45a8ff 124 * @retval None
bogdanm 0:9b334a45a8ff 125 */
bogdanm 0:9b334a45a8ff 126 void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
bogdanm 0:9b334a45a8ff 127 {
bogdanm 0:9b334a45a8ff 128 /* Check the parameters */
bogdanm 0:9b334a45a8ff 129 assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
bogdanm 0:9b334a45a8ff 130 assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
bogdanm 0:9b334a45a8ff 131
bogdanm 0:9b334a45a8ff 132 /* Set PLS[7:5] bits according to PVDLevel value */
bogdanm 0:9b334a45a8ff 133 MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
bogdanm 0:9b334a45a8ff 134
bogdanm 0:9b334a45a8ff 135 /* Clear any previous config. Keep it clear if no event or IT mode is selected */
bogdanm 0:9b334a45a8ff 136 __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
bogdanm 0:9b334a45a8ff 137 __HAL_PWR_PVD_EXTI_DISABLE_IT();
bogdanm 0:9b334a45a8ff 138 __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
bogdanm 0:9b334a45a8ff 139
bogdanm 0:9b334a45a8ff 140 /* Configure interrupt mode */
bogdanm 0:9b334a45a8ff 141 if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
bogdanm 0:9b334a45a8ff 142 {
bogdanm 0:9b334a45a8ff 143 __HAL_PWR_PVD_EXTI_ENABLE_IT();
bogdanm 0:9b334a45a8ff 144 }
bogdanm 0:9b334a45a8ff 145
bogdanm 0:9b334a45a8ff 146 /* Configure event mode */
bogdanm 0:9b334a45a8ff 147 if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
bogdanm 0:9b334a45a8ff 148 {
bogdanm 0:9b334a45a8ff 149 __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
bogdanm 0:9b334a45a8ff 150 }
bogdanm 0:9b334a45a8ff 151
bogdanm 0:9b334a45a8ff 152 /* Configure the edge */
bogdanm 0:9b334a45a8ff 153 if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
bogdanm 0:9b334a45a8ff 154 {
bogdanm 0:9b334a45a8ff 155 __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
bogdanm 0:9b334a45a8ff 156 }
bogdanm 0:9b334a45a8ff 157
bogdanm 0:9b334a45a8ff 158 if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
bogdanm 0:9b334a45a8ff 159 {
bogdanm 0:9b334a45a8ff 160 __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
bogdanm 0:9b334a45a8ff 161 }
bogdanm 0:9b334a45a8ff 162 }
bogdanm 0:9b334a45a8ff 163
bogdanm 0:9b334a45a8ff 164 /**
bogdanm 0:9b334a45a8ff 165 * @brief Enables the Power Voltage Detector(PVD).
bogdanm 0:9b334a45a8ff 166 * @retval None
bogdanm 0:9b334a45a8ff 167 */
bogdanm 0:9b334a45a8ff 168 void HAL_PWR_EnablePVD(void)
bogdanm 0:9b334a45a8ff 169 {
bogdanm 0:9b334a45a8ff 170 PWR->CR |= (uint32_t)PWR_CR_PVDE;
bogdanm 0:9b334a45a8ff 171 }
bogdanm 0:9b334a45a8ff 172
bogdanm 0:9b334a45a8ff 173 /**
bogdanm 0:9b334a45a8ff 174 * @brief Disables the Power Voltage Detector(PVD).
bogdanm 0:9b334a45a8ff 175 * @retval None
bogdanm 0:9b334a45a8ff 176 */
bogdanm 0:9b334a45a8ff 177 void HAL_PWR_DisablePVD(void)
bogdanm 0:9b334a45a8ff 178 {
bogdanm 0:9b334a45a8ff 179 PWR->CR &= ~((uint32_t)PWR_CR_PVDE);
bogdanm 0:9b334a45a8ff 180 }
bogdanm 0:9b334a45a8ff 181
bogdanm 0:9b334a45a8ff 182 /**
bogdanm 0:9b334a45a8ff 183 * @brief This function handles the PWR PVD interrupt request.
bogdanm 0:9b334a45a8ff 184 * @note This API should be called under the PVD_IRQHandler() or PVD_VDDIO2_IRQHandler().
bogdanm 0:9b334a45a8ff 185 * @retval None
bogdanm 0:9b334a45a8ff 186 */
bogdanm 0:9b334a45a8ff 187 void HAL_PWR_PVD_IRQHandler(void)
bogdanm 0:9b334a45a8ff 188 {
bogdanm 0:9b334a45a8ff 189 /* Check PWR exti flag */
bogdanm 0:9b334a45a8ff 190 if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
bogdanm 0:9b334a45a8ff 191 {
bogdanm 0:9b334a45a8ff 192 /* PWR PVD interrupt user callback */
bogdanm 0:9b334a45a8ff 193 HAL_PWR_PVDCallback();
bogdanm 0:9b334a45a8ff 194
bogdanm 0:9b334a45a8ff 195 /* Clear PWR Exti pending bit */
bogdanm 0:9b334a45a8ff 196 __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
bogdanm 0:9b334a45a8ff 197 }
bogdanm 0:9b334a45a8ff 198 }
bogdanm 0:9b334a45a8ff 199
bogdanm 0:9b334a45a8ff 200 /**
bogdanm 0:9b334a45a8ff 201 * @brief PWR PVD interrupt callback
bogdanm 0:9b334a45a8ff 202 * @retval None
bogdanm 0:9b334a45a8ff 203 */
bogdanm 0:9b334a45a8ff 204 __weak void HAL_PWR_PVDCallback(void)
bogdanm 0:9b334a45a8ff 205 {
bogdanm 0:9b334a45a8ff 206 /* NOTE : This function Should not be modified, when the callback is needed,
bogdanm 0:9b334a45a8ff 207 the HAL_PWR_PVDCallback could be implemented in the user file
bogdanm 0:9b334a45a8ff 208 */
bogdanm 0:9b334a45a8ff 209 }
bogdanm 0:9b334a45a8ff 210
bogdanm 0:9b334a45a8ff 211 #endif /* defined (STM32F031x6) || defined (STM32F051x8) || */
bogdanm 0:9b334a45a8ff 212 /* defined (STM32F071xB) || defined (STM32F091xC) || */
bogdanm 0:9b334a45a8ff 213 /* defined (STM32F042x6) || defined (STM32F072xB) */
bogdanm 0:9b334a45a8ff 214
bogdanm 0:9b334a45a8ff 215 #if defined (STM32F042x6) || defined (STM32F048xx) || \
bogdanm 0:9b334a45a8ff 216 defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
bogdanm 0:9b334a45a8ff 217 defined (STM32F091xC) || defined (STM32F098xx)
bogdanm 0:9b334a45a8ff 218 /**
bogdanm 0:9b334a45a8ff 219 * @brief Enable VDDIO2 monitor: enable Exti 31 and falling edge detection.
bogdanm 0:9b334a45a8ff 220 * @note If Exti 31 is enable correlty and VDDIO2 voltage goes below Vrefint,
bogdanm 0:9b334a45a8ff 221 an interrupt is generated Irq line 1.
bogdanm 0:9b334a45a8ff 222 NVIS has to be enable by user.
bogdanm 0:9b334a45a8ff 223 * @retval None
bogdanm 0:9b334a45a8ff 224 */
bogdanm 0:9b334a45a8ff 225 void HAL_PWREx_EnableVddio2Monitor(void)
bogdanm 0:9b334a45a8ff 226 {
bogdanm 0:9b334a45a8ff 227 __HAL_PWR_VDDIO2_EXTI_ENABLE_IT();
bogdanm 0:9b334a45a8ff 228 __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE();
bogdanm 0:9b334a45a8ff 229 }
bogdanm 0:9b334a45a8ff 230
bogdanm 0:9b334a45a8ff 231 /**
bogdanm 0:9b334a45a8ff 232 * @brief Disable the Vddio2 Monitor.
bogdanm 0:9b334a45a8ff 233 * @retval None
bogdanm 0:9b334a45a8ff 234 */
bogdanm 0:9b334a45a8ff 235 void HAL_PWREx_DisableVddio2Monitor(void)
bogdanm 0:9b334a45a8ff 236 {
bogdanm 0:9b334a45a8ff 237 __HAL_PWR_VDDIO2_EXTI_DISABLE_IT();
bogdanm 0:9b334a45a8ff 238 __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE();
bogdanm 0:9b334a45a8ff 239
bogdanm 0:9b334a45a8ff 240 }
bogdanm 0:9b334a45a8ff 241
bogdanm 0:9b334a45a8ff 242 /**
bogdanm 0:9b334a45a8ff 243 * @brief This function handles the PWR Vddio2 monitor interrupt request.
bogdanm 0:9b334a45a8ff 244 * @note This API should be called under the VDDIO2_IRQHandler() PVD_VDDIO2_IRQHandler().
bogdanm 0:9b334a45a8ff 245 * @retval None
bogdanm 0:9b334a45a8ff 246 */
bogdanm 0:9b334a45a8ff 247 void HAL_PWREx_Vddio2Monitor_IRQHandler(void)
bogdanm 0:9b334a45a8ff 248 {
bogdanm 0:9b334a45a8ff 249 /* Check PWR exti flag */
bogdanm 0:9b334a45a8ff 250 if(__HAL_PWR_VDDIO2_EXTI_GET_FLAG() != RESET)
bogdanm 0:9b334a45a8ff 251 {
bogdanm 0:9b334a45a8ff 252 /* PWR Vddio2 monitor interrupt user callback */
bogdanm 0:9b334a45a8ff 253 HAL_PWREx_Vddio2MonitorCallback();
bogdanm 0:9b334a45a8ff 254
bogdanm 0:9b334a45a8ff 255 /* Clear PWR Exti pending bit */
bogdanm 0:9b334a45a8ff 256 __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG();
bogdanm 0:9b334a45a8ff 257 }
bogdanm 0:9b334a45a8ff 258 }
bogdanm 0:9b334a45a8ff 259
bogdanm 0:9b334a45a8ff 260 /**
bogdanm 0:9b334a45a8ff 261 * @brief PWR Vddio2 Monitor interrupt callback
bogdanm 0:9b334a45a8ff 262 * @retval None
bogdanm 0:9b334a45a8ff 263 */
bogdanm 0:9b334a45a8ff 264 __weak void HAL_PWREx_Vddio2MonitorCallback(void)
bogdanm 0:9b334a45a8ff 265 {
bogdanm 0:9b334a45a8ff 266 /* NOTE : This function Should not be modified, when the callback is needed,
bogdanm 0:9b334a45a8ff 267 the HAL_PWREx_Vddio2MonitorCallback could be implemented in the user file
bogdanm 0:9b334a45a8ff 268 */
bogdanm 0:9b334a45a8ff 269 }
bogdanm 0:9b334a45a8ff 270
bogdanm 0:9b334a45a8ff 271 #endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
bogdanm 0:9b334a45a8ff 272 defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
bogdanm 0:9b334a45a8ff 273 defined (STM32F091xC) || defined (STM32F098xx) */
bogdanm 0:9b334a45a8ff 274
bogdanm 0:9b334a45a8ff 275 /**
bogdanm 0:9b334a45a8ff 276 * @}
bogdanm 0:9b334a45a8ff 277 */
bogdanm 0:9b334a45a8ff 278
bogdanm 0:9b334a45a8ff 279 /**
bogdanm 0:9b334a45a8ff 280 * @}
bogdanm 0:9b334a45a8ff 281 */
bogdanm 0:9b334a45a8ff 282
bogdanm 0:9b334a45a8ff 283 #endif /* HAL_PWR_MODULE_ENABLED */
bogdanm 0:9b334a45a8ff 284 /**
bogdanm 0:9b334a45a8ff 285 * @}
bogdanm 0:9b334a45a8ff 286 */
bogdanm 0:9b334a45a8ff 287
bogdanm 0:9b334a45a8ff 288 /**
bogdanm 0:9b334a45a8ff 289 * @}
bogdanm 0:9b334a45a8ff 290 */
bogdanm 0:9b334a45a8ff 291
bogdanm 0:9b334a45a8ff 292 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/