Tobi's ubw test branch

Dependencies:   mavlink_bridge mbed

Fork of AIT_UWB_Range by Benjamin Hepp

Committer:
manumaet
Date:
Sun Nov 16 10:04:00 2014 +0000
Revision:
1:1311e7af0a5c
Parent:
0:f50e671ffff7
Child:
2:16e45ff70baf
no more work, before revert

Who changed what in which revision?

UserRevisionLine numberNew contents of line
manumaet 0:f50e671ffff7 1 #include "mbed.h"
manumaet 0:f50e671ffff7 2 #include "PC.h" // Serial Port via USB for debugging with Terminal
manumaet 0:f50e671ffff7 3 #include "DW1000.h"
manumaet 0:f50e671ffff7 4
manumaet 0:f50e671ffff7 5 PC pc(USBTX, USBRX, 921600); // USB UART Terminal
manumaet 0:f50e671ffff7 6 DW1000 dw(D11, D12, D13, D10); // SPI1 on Nucleo Board (MOSI, MISO, SCLK, CS)
manumaet 0:f50e671ffff7 7
manumaet 0:f50e671ffff7 8 /*uint32_t read32Bit(uint8_t reg, uint16_t subaddress) {
manumaet 0:f50e671ffff7 9 uint32_t result = 0;
manumaet 0:f50e671ffff7 10
manumaet 0:f50e671ffff7 11 }*/
manumaet 0:f50e671ffff7 12
manumaet 0:f50e671ffff7 13 int main() {
manumaet 0:f50e671ffff7 14 pc.printf("DecaWave 0.1\r\nup and running!\r\n");
manumaet 0:f50e671ffff7 15
manumaet 0:f50e671ffff7 16 dw.setEUI(0xFAEDCD01FAEDCD01);
manumaet 0:f50e671ffff7 17
manumaet 0:f50e671ffff7 18 int i=0;
manumaet 0:f50e671ffff7 19 while(1) {
manumaet 0:f50e671ffff7 20 i++;
manumaet 0:f50e671ffff7 21 pc.printf("%d DEVICE_ID register: 0x%X\r\n", i, dw.getDeviceID());
manumaet 0:f50e671ffff7 22 pc.printf("%d EUI register: %016llX\r\n", i, dw.getEUI());
manumaet 0:f50e671ffff7 23 pc.printf("%d Voltage: %f\r\n", i, dw.getVoltage());
manumaet 0:f50e671ffff7 24
manumaet 0:f50e671ffff7 25 // read System Configuration
manumaet 0:f50e671ffff7 26 uint32_t conf = 0;
manumaet 0:f50e671ffff7 27 dw.readRegister(DW1000_SYS_CFG, 0, (uint8_t*)&conf, 4);
manumaet 0:f50e671ffff7 28 pc.printf("%d System Configuration: %X\r\n", i, conf);
manumaet 0:f50e671ffff7 29
manumaet 1:1311e7af0a5c 30 # if 0 // to make one node sender and one receiver
manumaet 0:f50e671ffff7 31 // Send something
manumaet 0:f50e671ffff7 32 uint8_t message[13] = "HELLO WORLD!"; // fill buffer
manumaet 1:1311e7af0a5c 33 //sprintf((char*)message, "%d World!!", i);
manumaet 0:f50e671ffff7 34 dw.writeRegister(DW1000_TX_BUFFER, 0, message, 13);
manumaet 0:f50e671ffff7 35 uint8_t messagecheck[13];
manumaet 0:f50e671ffff7 36 dw.readRegister(DW1000_TX_BUFFER, 0, messagecheck, 13);
manumaet 0:f50e671ffff7 37 pc.printf("Message in buffer: %s\r\n", messagecheck);
manumaet 0:f50e671ffff7 38
manumaet 0:f50e671ffff7 39 uint16_t framelength = 13; // put length of frame
manumaet 0:f50e671ffff7 40 dw.writeRegister(DW1000_TX_FCTRL, 0, (uint8_t*)&framelength, 1);
manumaet 0:f50e671ffff7 41
manumaet 1:1311e7af0a5c 42 if ((i % 2) == 0) {
manumaet 0:f50e671ffff7 43 uint8_t txstart = 0x02; // trigger sending process
manumaet 0:f50e671ffff7 44 dw.writeRegister(DW1000_SYS_CTRL, 0, &txstart, 1);
manumaet 0:f50e671ffff7 45 }
manumaet 0:f50e671ffff7 46 # else
manumaet 0:f50e671ffff7 47 // Receive something
manumaet 0:f50e671ffff7 48 uint8_t rxenable = 0x01; // start listening
manumaet 0:f50e671ffff7 49 dw.writeRegister(DW1000_SYS_CTRL, 1, &rxenable, 1);
manumaet 0:f50e671ffff7 50
manumaet 0:f50e671ffff7 51 //uint8_t frameready = 0; // check if frame received
manumaet 0:f50e671ffff7 52 //while (frameready != 0x20) {
manumaet 0:f50e671ffff7 53 // i++;
manumaet 0:f50e671ffff7 54 // pc.printf("%d Waiting for frame... \r\n", i);
manumaet 0:f50e671ffff7 55 // dw.readRegister(DW1000_SYS_STATUS, 1, &frameready, 13);
manumaet 0:f50e671ffff7 56 // wait(0.5);
manumaet 0:f50e671ffff7 57 //}
manumaet 0:f50e671ffff7 58
manumaet 0:f50e671ffff7 59 uint8_t receive[13] = "NOTHING IN!!"; // get data from buffer
manumaet 0:f50e671ffff7 60 dw.readRegister(DW1000_RX_BUFFER, 0, receive, 13);
manumaet 0:f50e671ffff7 61 pc.printf("Message received: %s\r\n", receive);
manumaet 0:f50e671ffff7 62 # endif
manumaet 0:f50e671ffff7 63
manumaet 0:f50e671ffff7 64 wait(0.5);
manumaet 0:f50e671ffff7 65 }
manumaet 0:f50e671ffff7 66 }