Diff: KTMS1201.h

Revision:

0:76906da6c1ad

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/KTMS1201.h	Mon Nov 25 21:02:23 2013 +0000
@@ -0,0 +1,102 @@
+/*  Header file for Arduino and KTM-S1201 LCD module
+    Originally Written by Jeff Albertson Ver 1.0
+    Modifications and code normalisation by Robert W. Mech rob@mechsoftware.com
+    Modified by John Boxall 11/March/2013
+        
+    These are the pins that are output on the KTM-S1201
+
+    LCD pin number
+    Pin 1  LcdVcc    +5V dc power
+    pin 2  LcdVss    GND
+    pin 3  LcdnSck   Not Serial clock
+    pin 4  LcdSi     Serial data
+    pin 5  LcdCnD    Select Command or Data mode 
+    pin 6  LcdnRes   Reset LCD    
+    pin 7  LcdnBus   LCD not busy
+    pin 8  LcdnCs    LCD not Chip select
+    pin 9  Pot wiper  Vlc LCD Contrast Connect POT between pin 9 and GND
+    pin 10 NC
+*/
+
+#define HIGH 1
+#define LOW 0
+
+// Here we set which LCD pins will connect to which Arduino pin
+/*
+#define LcdSck  4 //Not Serial clock
+#define LcdSi   5 //Serial data in
+#define LcdCnD  6 //Command or Not data in
+#define LcdnRes 7 //Not reset low = reset
+#define LcdnBus 9// Not Busy output from LCD not used if delay(1) after LcdnCs changes
+#define LcdnCs  8 //Not Chip select Low = LCD selected
+THESE DEFINITION MOVED TO DigitalOut FUNCTIONS IN main.cpp
+*/
+//  Put a delay(1) after every LcdnCs change or check LcdnBus
+#define t 100
+#define t1 10
+
+// The Not Chip select pin is the only unique
+// Pin on the LCD all other pins can be paralleled
+// for more ktm-s1201 displays
+#define _Mode 0x40
+#define _USync 0x31
+#define _FBlink 0x1b
+#define _SBlink 0x1a
+#define _NoBlink 0x18
+#define _DispOn 0x11
+#define _Decode 0x15
+#define _NoDecode 0x14
+#define _LoadPtr 0xE0
+#define _SetDp 0xb8   // Set decimal point (Dp)
+#define _ClearDp 0x9f // Clear decimal point (Dp)
+#define _ClearDsp 0x20 // Clear display memory
+
+// To set Dp you must be in NoDecode mode and point to character (LoadPtr)
+//      ---   0x01
+//0x10 |   |  0x02
+//0x20  ---  
+//0x40 |   |  0x04
+//0x80  --- o 0x08 
+
+#define _cet 0x31 // Celsius 
+#define _ 0x0     // Space
+#define _A  0x77  //
+#define _B  0xF4  //
+#define _C  0xE0  //
+#define _D  0xE6  //
+#define _E  0xF1  //
+#define _F  0x71  //
+#define _G  0xD5  //
+#define _H  0x74  //
+#define _I  0x04  //
+#define _J  0x86  //
+#define _K  0x70  //
+#define _L  0xD0  //
+#define _M  0x76  //
+#define _N  0x64  //
+#define _O  0xE4  //
+#define _P  0x73  //
+#define _Q  0xDF  //
+#define _R  0x60  //
+#define _S  0xB5  //
+#define _T  0xF0  //
+#define _U  0xC4  //
+#define _V  0xD6  //
+#define _W  0xF6  //
+#define _X  0x56  //
+#define _Y  0x72  //
+#define _Z  0xEB  //
+#define _1  0x06  //
+#define _2  0xE3  //
+#define _3  0xA7  //
+#define _4  0x36  //
+#define _5  0xB5  //
+#define _6  0xF4  //
+#define _7  0x07  //
+#define _8  0xF7  //
+#define _9  0x37  //
+#define _0  0xD7  //
+#define _DASH  0x20  //
+#define _DEGREE  0x33  //
+
+