USB device stack
Dependents: USBMSD_step1 USBMSD_step1_5 picossd_step1_2cs
Diff: targets/TARGET_NUVOTON/TARGET_NUC472/USBHAL_NUC472.cpp
- Revision:
- 71:53949e6131f6
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/TARGET_NUVOTON/TARGET_NUC472/USBHAL_NUC472.cpp Thu Jul 27 12:14:04 2017 +0100 @@ -0,0 +1,730 @@ +/* mbed Microcontroller Library + * Copyright (c) 2015-2016 Nuvoton + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#if defined(TARGET_NUMAKER_PFM_NUC472) + +#include "USBHAL.h" +#include "NUC472_442.h" +#include "pinmap.h" + +/** + * EP: mbed USBD defined endpoint, e.g. EP0OUT/IN, EP1OUT/IN, EP2OUT/IN. + * EPX: BSP defined endpoint, e.g. CEP, EPA, EPB, EPC. + */ + +USBHAL * USBHAL::instance; + +static volatile uint32_t s_ep_compl = 0; +static volatile uint32_t s_ep_buf_ind = 0; +static volatile uint8_t s_usb_addr = 0; +static volatile S_USBD_CMD_T s_setup; +static volatile uint16_t s_ctrlin_packetsize; +static uint8_t *g_usbd_CtrlInPointer = 0; +static uint32_t g_usbd_CtrlMaxPktSize = 64; +static uint32_t g_usbd_ShortPkt = 0; +static uint32_t gEpRead = 0; +static uint32_t gEpReadCnt = 0; + +void USBD_CtrlInput(void) +{ + int volatile i; + uint32_t volatile count; + + // Process remained data + if (g_usbd_CtrlInSize >= g_usbd_CtrlMaxPktSize) + { + // Data size > MXPLD + for (i=0; i<(g_usbd_CtrlMaxPktSize >> 2); i++, g_usbd_CtrlInPointer+=4) + USBD->CEPDAT = *(uint32_t *)g_usbd_CtrlInPointer; + USBD_START_CEP_IN(g_usbd_CtrlMaxPktSize); + g_usbd_CtrlInSize -= g_usbd_CtrlMaxPktSize; + } + else + { + // Data size <= MXPLD + for (i=0; i<(g_usbd_CtrlInSize >> 2); i++, g_usbd_CtrlInPointer+=4) + USBD->CEPDAT = *(uint32_t *)g_usbd_CtrlInPointer; + + count = g_usbd_CtrlInSize % 4; + for (i=0; i<count; i++) + USBD->CEPDAT_BYTE = *(uint8_t *)(g_usbd_CtrlInPointer + i); + + USBD_START_CEP_IN(g_usbd_CtrlInSize); + g_usbd_CtrlInPointer = 0; + g_usbd_CtrlInSize = 0; + } +} + +USBHAL::USBHAL(void) +{ + SYS_UnlockReg(); + + s_ep_buf_ind = 0; + + memset(epCallback, 0x00, sizeof (epCallback)); + epCallback[0] = &USBHAL::EP1_OUT_callback; + epCallback[1] = &USBHAL::EP2_IN_callback; + epCallback[2] = &USBHAL::EP3_OUT_callback; + epCallback[3] = &USBHAL::EP4_IN_callback; + epCallback[4] = &USBHAL::EP5_OUT_callback; + epCallback[5] = &USBHAL::EP6_IN_callback; + epCallback[6] = &USBHAL::EP7_OUT_callback; + epCallback[7] = &USBHAL::EP8_IN_callback; + epCallback[8] = &USBHAL::EP9_OUT_callback; + epCallback[9] = &USBHAL::EP10_IN_callback; + epCallback[10] = &USBHAL::EP11_OUT_callback; + epCallback[11] = &USBHAL::EP12_IN_callback; + + instance = this; + + /* Enable USBD module clock */ + CLK_EnableModuleClock(USBD_MODULE); + + /* Enable USB PHY's LDO33. Run as USB device. */ + SYS->USBPHY = SYS_USBPHY_USBROLE_OTG_V33_EN | SYS_USBPHY_USBROLE_STD_USBD; + + /* Enable USB PHY and wait for it ready */ + USBD_ENABLE_PHY(); + while (1) + { + USBD->EPAMPS = 0x20; + if (USBD->EPAMPS == 0x20) + break; + } + + /* Force to full-speed */ + USBD->OPER = 0;//USBD_OPER_HISPDEN_Msk; + + /* Set SE0 (disconnect) */ + USBD_SET_SE0(); + + NVIC_SetVector(USBD_IRQn, (uint32_t) &_usbisr); + NVIC_EnableIRQ(USBD_IRQn); +} + +USBHAL::~USBHAL(void) +{ + NVIC_DisableIRQ(USBD_IRQn); + USBD_SET_SE0(); + USBD_DISABLE_PHY(); +} + +void USBHAL::connect(void) +{ + USBD_ResetDMA(); + USBD_SET_ADDR(0); + + /** + * Control Transfer Packet Size Constraints + * low-speed: 8 + * full-speed: 8, 16, 32, 64 + * high-speed: 64 + */ + /* Control endpoint */ + USBD_SetEpBufAddr(CEP, s_ep_buf_ind, MAX_PACKET_SIZE_EP0); + s_ep_buf_ind = MAX_PACKET_SIZE_EP0; + + /* Enable USB/CEP interrupt */ + USBD_ENABLE_USB_INT(USBD_GINTEN_USBIE_Msk | USBD_GINTEN_CEPIE_Msk); + USBD_ENABLE_CEP_INT(USBD_CEPINTEN_SETUPPKIEN_Msk|USBD_CEPINTEN_STSDONEIEN_Msk); + + /* Enable BUS interrupt */ + USBD_ENABLE_BUS_INT( + USBD_BUSINTEN_DMADONEIEN_Msk | + USBD_BUSINTEN_RESUMEIEN_Msk | + USBD_BUSINTEN_RSTIEN_Msk | + USBD_BUSINTEN_VBUSDETIEN_Msk | + USBD_BUSINTEN_SOFIEN_Msk + ); + + /* Clear SE0 (connect) */ + USBD_CLR_SE0(); +} + +void USBHAL::disconnect(void) +{ + /* Set SE0 (disconnect) */ + USBD_SET_SE0(); +} + +void USBHAL::configureDevice(void) +{ + /** + * In USBDevice.cpp > USBDevice::requestSetConfiguration, configureDevice() is called after realiseEndpoint() (in USBCallback_setConfiguration()). + * So we have the following USB buffer management policy: + * 1. Allocate for CEP on connect(). + * 2. Allocate for EPX in realiseEndpoint(). + * 3. Deallocate all except for CEP in unconfigureDevice(). + */ +} + +void USBHAL::unconfigureDevice(void) +{ + s_ep_buf_ind = MAX_PACKET_SIZE_EP0; +} + +void USBHAL::setAddress(uint8_t address) +{ + // NOTE: Delay address setting; otherwise, USB controller won't ack. + s_usb_addr = address; +} + +void USBHAL::remoteWakeup(void) +{ + USBD->OPER |= USBD_OPER_RESUMEEN_Msk; +} + +bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t options) +{ + uint32_t ep_type; + uint32_t ep_hw_index = NU_EP2EPH(endpoint); + + USBD_SetEpBufAddr(ep_hw_index, s_ep_buf_ind, maxPacket); + s_ep_buf_ind += maxPacket; + USBD_SET_MAX_PAYLOAD(ep_hw_index, maxPacket); + + switch (NU_EP2EPL(endpoint)) + { + case 1: case 2: + ep_type = USB_EP_CFG_TYPE_INT; + break; + + case 3: case 4: + ep_type = USB_EP_CFG_TYPE_ISO; + break; + + default: + ep_type = USB_EP_CFG_TYPE_BULK; + } + uint32_t ep_dir = (NU_EP_DIR(endpoint) == NU_EP_DIR_IN) ? USB_EP_CFG_DIR_IN : USB_EP_CFG_DIR_OUT; + USBD_ConfigEp(ep_hw_index, NU_EP2EPL(endpoint), ep_type, ep_dir); + + /* Enable USB/EPX interrupt */ + // NOTE: Require USBD_GINTEN_EPAIE_Pos, USBD_GINTEN_EPBIE_Pos, ... USBD_GINTEN_EPLIE_Pos to be consecutive. + USBD_ENABLE_USB_INT(USBD->GINTEN | USBD_GINTEN_USBIE_Msk | + USBD_GINTEN_CEPIE_Msk | + 1 << (ep_hw_index + USBD_GINTEN_EPAIE_Pos)); // Added USB/EPX interrupt + + if (ep_dir == 0) + USBD_ENABLE_EP_INT(ep_hw_index, USBD_EPINTEN_RXPKIEN_Msk); + else + USBD_ENABLE_EP_INT(ep_hw_index, USBD_EPINTEN_TXPKIEN_Msk); + return true; +} + +void USBHAL::EP0setup(uint8_t *buffer) +{ + uint32_t sz; + endpointReadResult(EP0OUT, buffer, &sz); +} + +void USBHAL::EP0read(void) +{ + if (s_setup.wLength && ! (s_setup.bmRequestType & 0x80)) + { + // Control OUT + USBD_ENABLE_CEP_INT(USBD_CEPINTEN_SETUPPKIEN_Msk | USBD_CEPINTEN_RXPKIEN_Msk); + } + else + { + // Status stage + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_STSDONEIF_Msk); + USBD_SET_CEP_STATE(USB_CEPCTL_NAKCLR); + USBD_ENABLE_CEP_INT(USBD_CEPINTEN_STSDONEIEN_Msk); + } +} + +void USBHAL::EP0readStage(void) +{ + // N/A +} + +uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) +{ + uint32_t i; + uint32_t ceprxcnt = USBD->CEPRXCNT; + for (i = 0; i < ceprxcnt; i ++) + *buffer ++ = USBD->CEPDAT_BYTE; + return ceprxcnt; +} + +void USBHAL::EP0write(uint8_t *buffer, uint32_t size) +{ + if (buffer && size) + { + g_usbd_CtrlInPointer = buffer; + g_usbd_CtrlInSize = size; + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_INTKIF_Msk); + USBD_ENABLE_CEP_INT(USBD_CEPINTEN_INTKIEN_Msk); + } + else + { + /* Status stage */ + s_ctrlin_packetsize = 0; + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_STSDONEIF_Msk); + USBD_SET_CEP_STATE(USB_CEPCTL_NAKCLR); + USBD_ENABLE_CEP_INT(USBD_CEPINTEN_STSDONEIEN_Msk); + } +} + +void USBHAL::EP0getWriteResult(void) +{ + // N/A +} + +void USBHAL::EP0stall(void) +{ + stallEndpoint(EP0OUT); +} + +EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) +{ + return EP_PENDING; +} + +EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t * buffer, uint32_t *bytesRead) //spcheng +{ + if (endpoint == EP0OUT) + { + if (buffer) { + *((uint16_t *) (buffer + 0)) = (uint16_t) USBD->SETUP1_0; + *((uint16_t *) (buffer + 2)) = (uint16_t) USBD->SETUP3_2; + *((uint16_t *) (buffer + 4)) = (uint16_t) USBD->SETUP5_4; + *((uint16_t *) (buffer + 6)) = (uint16_t) USBD->SETUP7_6; + } + + s_setup.bmRequestType = (uint8_t) (USBD->SETUP1_0 & 0xff); + s_setup.bRequest = (int8_t) (USBD->SETUP1_0 >> 8) & 0xff; + s_setup.wValue = (uint16_t) USBD->SETUP3_2; + s_setup.wIndex = (uint16_t) USBD->SETUP5_4; + s_setup.wLength = (uint16_t) USBD->SETUP7_6; + } + else + { + if (!(s_ep_compl & (1 << NU_EP2EPL(endpoint)))) + { + while (1) + { + if (!(USBD->DMACTL & USBD_DMACTL_DMAEN_Msk)) + break; + else + if (!USBD_IS_ATTACHED()) + break; + } + gEpReadCnt = USBD_GET_EP_DATA_COUNT(NU_EP2EPH(endpoint)); + if (gEpReadCnt == 0) + { + *bytesRead = 0; + return EP_COMPLETED; + } + s_ep_compl |= (1 << NU_EP2EPL(endpoint)); + USBD_SET_DMA_LEN(gEpReadCnt); + USBD_SET_DMA_ADDR((uint32_t)buffer); + USBD_SET_DMA_WRITE(NU_EP2EPL(endpoint)); + USBD_ENABLE_DMA(); + return EP_PENDING;; + + } + else + { + if ((USBD->DMACTL & USBD_DMACTL_DMAEN_Msk)) + return EP_PENDING;; + + USBD_CLR_BUS_INT_FLAG(USBD_BUSINTSTS_DMADONEIF_Msk); + s_ep_compl &= ~(1 << NU_EP2EPL(endpoint)); + *bytesRead = gEpReadCnt; + } + } + return EP_COMPLETED; +} + + +uint32_t USBHAL::endpointReadcore(uint8_t endpoint, uint8_t *buffer) +{ + return 0; +} + +EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) +{ + uint32_t ep_logic_index = NU_EP2EPL(endpoint); + if (ep_logic_index == 0) + return EP_INVALID; + else + { + uint32_t ep_hw_index = NU_EP2EPH(endpoint); + uint32_t mps = USBD_GET_EP_MAX_PAYLOAD(ep_hw_index); + if (size > mps) { + return EP_INVALID; + } + if (size < mps) + g_usbd_ShortPkt = 1; + if (!(s_ep_compl & (1 << NU_EP2EPL(endpoint)))) + { + s_ep_compl |= (1 << ep_logic_index); + + while (1) + { + if (!(USBD->DMACTL & USBD_DMACTL_DMAEN_Msk)) + break; + else + if (!USBD_IS_ATTACHED()) + break; + } + USBD_SET_DMA_LEN(size); + USBD_SET_DMA_ADDR((uint32_t)data); + USBD_SET_DMA_READ(ep_logic_index); + USBD_ENABLE_DMA(); + } + } + return EP_PENDING; +} + +EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) +{ + if (!(s_ep_compl & (1 << NU_EP2EPL(endpoint)))) + return EP_COMPLETED; + else + { + if ((USBD_GET_EP_DATA_COUNT(NU_EP2EPH(endpoint))) == 0 && !(USBD->DMACTL & USBD_DMACTL_DMAEN_Msk)) + { + s_ep_compl &= ~(s_ep_compl & (1 << NU_EP2EPL(endpoint))); + return EP_COMPLETED; + } + } + return EP_PENDING; +} + +void USBHAL::stallEndpoint(uint8_t endpoint) +{ + uint32_t ep_hw_index = NU_EP2EPH(endpoint); + if (ep_hw_index >= NUMBER_OF_PHYSICAL_ENDPOINTS) + return; + USBD_SetStall(ep_hw_index); +} + +void USBHAL::unstallEndpoint(uint8_t endpoint) +{ + uint32_t ep_hw_index = NU_EP2EPH(endpoint); + if (ep_hw_index >= NUMBER_OF_PHYSICAL_ENDPOINTS) + return; + USBD_ClearStall(ep_hw_index); +} + +bool USBHAL::getEndpointStallState(uint8_t endpoint) +{ + uint32_t ep_hw_index = NU_EP2EPH(endpoint); + if (ep_hw_index >= NUMBER_OF_PHYSICAL_ENDPOINTS) + return false; + return USBD_GetStall(ep_hw_index) ? 1 : 0; +} + +void USBHAL::_usbisr(void) +{ + MBED_ASSERT(instance); + instance->usbisr(); +} + +void USBHAL::usbisr(void) +{ + uint32_t gintsts = USBD->GINTSTS & USBD->GINTEN; + if (! gintsts) + return; + + if (gintsts & USBD_GINTSTS_USBIF_Msk) + { + uint32_t busintsts = USBD->BUSINTSTS & USBD->BUSINTEN; + + /* SOF */ + if (busintsts & USBD_BUSINTSTS_SOFIF_Msk) + { + USBD_CLR_BUS_INT_FLAG(USBD_BUSINTSTS_SOFIF_Msk); + // TODO + SOF(USBD->FRAMECNT >> 3); + } + + /* Reset */ + if (busintsts & USBD_BUSINTSTS_RSTIF_Msk) + { + connect(); + USBD_CLR_BUS_INT_FLAG(USBD_BUSINTSTS_RSTIF_Msk); + USBD_CLR_CEP_INT_FLAG(0x1ffc); + } + + /* Resume */ + if (busintsts & USBD_BUSINTSTS_RESUMEIF_Msk) + { + USBD_ENABLE_BUS_INT(USBD_BUSINTEN_RSTIEN_Msk|USBD_BUSINTEN_SUSPENDIEN_Msk | USBD_BUSINTEN_SOFIEN_Msk | USBD_BUSINTEN_SOFIEN_Msk); + USBD_CLR_BUS_INT_FLAG(USBD_BUSINTSTS_RESUMEIF_Msk); + } + + /* Suspend */ + if (busintsts & USBD_BUSINTSTS_SUSPENDIF_Msk) + { + USBD_ENABLE_BUS_INT(USBD_BUSINTEN_RSTIEN_Msk | USBD_BUSINTEN_RESUMEIEN_Msk |USBD_BUSINTEN_SOFIEN_Msk); + USBD_CLR_BUS_INT_FLAG(USBD_BUSINTSTS_SUSPENDIF_Msk); + } + + /* High-speed */ + if (busintsts & USBD_BUSINTSTS_HISPDIF_Msk) + { + USBD_ENABLE_CEP_INT(USBD_CEPINTEN_SETUPPKIEN_Msk); + USBD_CLR_BUS_INT_FLAG(USBD_BUSINTSTS_HISPDIF_Msk); + } + + /* DMA */ + if (busintsts & USBD_BUSINTSTS_DMADONEIF_Msk) + { + if (USBD->DMACTL & 0x10) /* IN - Read */ + { + if (g_usbd_ShortPkt) + { + uint32_t ep_hw_index = NU_EPL2EPH((USBD->DMACTL & 0xF)); + USBD_SET_EP_SHORT_PACKET(ep_hw_index); + g_usbd_ShortPkt = 0; + } + } + USBD_CLR_BUS_INT_FLAG(USBD_BUSINTSTS_DMADONEIF_Msk); + } + + /* PHY clock available */ + if (busintsts & USBD_BUSINTSTS_PHYCLKVLDIF_Msk) + { + USBD_CLR_BUS_INT_FLAG(USBD_BUSINTSTS_PHYCLKVLDIF_Msk); + } + + /* VBUS plug-in */ + if (busintsts & USBD_BUSINTSTS_VBUSDETIF_Msk) + { + if (USBD_IS_ATTACHED()) + { + // USB plug-in + USBD_ENABLE_USB(); + } + else + { + // USB unplug-out + USBD_DISABLE_USB(); + } + USBD_CLR_BUS_INT_FLAG(USBD_BUSINTSTS_VBUSDETIF_Msk); + } + } + + /* CEP interrupts */ + if (gintsts & USBD_GINTSTS_CEPIF_Msk) + { + uint32_t cepintsts = USBD->CEPINTSTS & USBD->CEPINTEN; + + /* SETUP token packet */ + if (cepintsts & USBD_CEPINTSTS_SETUPTKIF_Msk) + { + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_SETUPTKIF_Msk); + return; + } + + /* SETUP transaction */ + if (cepintsts & USBD_CEPINTSTS_SETUPPKIF_Msk) + { + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_SETUPPKIF_Msk); + EP0setupCallback(); + return; + } + + /* OUT token packet */ + if (cepintsts & USBD_CEPINTSTS_OUTTKIF_Msk) + { + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_OUTTKIF_Msk); + USBD_ENABLE_CEP_INT(USBD_CEPINTEN_STSDONEIEN_Msk); + return; + } + + /* IN token packet */ + if (cepintsts & USBD_CEPINTSTS_INTKIF_Msk) + { + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_INTKIF_Msk); + if (!(cepintsts & USBD_CEPINTSTS_STSDONEIF_Msk)) + { + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_TXPKIF_Msk); + USBD_ENABLE_CEP_INT(USBD_CEPINTEN_TXPKIEN_Msk); + USBD_CtrlInput(); + } + else + { + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_TXPKIF_Msk); + USBD_ENABLE_CEP_INT(USBD_CEPINTEN_TXPKIEN_Msk|USBD_CEPINTEN_STSDONEIEN_Msk); + } + return; + } + + /* PING packet */ + if (cepintsts & USBD_CEPINTSTS_PINGIF_Msk) + { + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_PINGIF_Msk); + return; + } + + /* IN transaction */ + if (cepintsts & USBD_CEPINTSTS_TXPKIF_Msk) + { + EP0in(); + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_TXPKIF_Msk); + return; + } + + /* OUT transaction */ + if (cepintsts & USBD_CEPINTSTS_RXPKIF_Msk) + { + EP0out(); + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_RXPKIF_Msk); + return; + } + + /* NAK handshake packet */ + if (cepintsts & USBD_CEPINTSTS_NAKIF_Msk) + { + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_NAKIF_Msk); + return; + } + + /* STALL handshake packet */ + if (cepintsts & USBD_CEPINTSTS_STALLIF_Msk) + { + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_STALLIF_Msk); + return; + } + + /* ERR special packet */ + if (cepintsts & USBD_CEPINTSTS_ERRIF_Msk) + { + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_ERRIF_Msk); + return; + } + + /* Status stage transaction */ + if (cepintsts & USBD_CEPINTSTS_STSDONEIF_Msk) + { + if (s_usb_addr) + { + USBD_SET_ADDR(s_usb_addr); + s_usb_addr = 0; + } + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_STSDONEIF_Msk); + USBD_ENABLE_CEP_INT(USBD_CEPINTEN_SETUPPKIEN_Msk); + return; + } + + /* Buffer Full */ + if (cepintsts & USBD_CEPINTSTS_BUFFULLIF_Msk) + { + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_BUFFULLIF_Msk); + return; + } + + /* Buffer Empty */ + if (cepintsts & USBD_CEPINTSTS_BUFEMPTYIF_Msk) + { + USBD_CLR_CEP_INT_FLAG(USBD_CEPINTSTS_BUFEMPTYIF_Msk); + return; + } + } + /* EPA, EPB, EPC, ... EPL interrupts */ + uint32_t gintsts_epx = gintsts >> 2; + uint32_t ep_hw_index = 0; + while (gintsts_epx) { + if (gintsts_epx & 0x01) + { + uint32_t epxintsts = USBD_GET_EP_INT_FLAG(ep_hw_index) & USBD_GET_EP_INT_EN(ep_hw_index); + + USBD_CLR_EP_INT_FLAG(ep_hw_index, epxintsts); + + /* Buffer Full */ + if (epxintsts & USBD_EPINTSTS_BUFFULLIF_Msk) + { + } + + /* Buffer Empty */ + if (epxintsts & USBD_EPINTSTS_BUFEMPTYIF_Msk) + { + } + + /* Short Packet Transferred */ + if (epxintsts & USBD_EPINTSTS_SHORTTXIF_Msk) + { + } + + /* Data Packet Transmitted */ + if (epxintsts & USBD_EPINTSTS_TXPKIF_Msk) + { + s_ep_compl &= ~(1 << (NU_EPH2EPL(ep_hw_index))); + if ((instance->*(epCallback[ep_hw_index]))()) + { + } + } + + /* Data Packet Received */ + if (epxintsts & USBD_EPINTSTS_RXPKIF_Msk) + { + if ((instance->*(epCallback[ep_hw_index]))()) + { + + } + } + + /* OUT token packet */ + if (epxintsts & USBD_EPINTSTS_OUTTKIF_Msk) + { + } + + /* IN token packet */ + if (epxintsts & USBD_EPINTSTS_INTKIF_Msk) + { + } + + /* PING packet */ + if (epxintsts & USBD_EPINTSTS_PINGIF_Msk) + { + } + + /* NAK handshake packet sent to Host */ + if (epxintsts & USBD_EPINTSTS_NAKIF_Msk) + { + } + + /* STALL handshake packet sent to Host */ + if (epxintsts & USBD_EPINTSTS_STALLIF_Msk) + { + } + + /* NYET handshake packet sent to Host */ + if (epxintsts & USBD_EPINTSTS_NYETIF_Msk) + { + } + + /* ERR packet sent to Host */ + if (epxintsts & USBD_EPINTSTS_ERRIF_Msk) + { + } + + /* Bulk Out Short Packet Received */ + if (epxintsts & USBD_EPINTSTS_SHORTRXIF_Msk) + { + } + } + gintsts_epx = gintsts_epx >> 1; + ep_hw_index++; + } +} +#endif +