File content as of revision 19:304b17087d06:

/*                                        Cyclic Executive
This software is built to test (Cyclic Executive). Five main functions are used in and every one of them
has its own time of repetition. To execute this, a Ticker was used to call a function every 100 mSec.
In other words, when 100 mSec is passed, the Cycle function is called and so on every 100 mSec. In this
software a benefit is a token place for the difference between a float division with integer one. For example
float(Counter/4.0)-Counter/4 if the Counter is a real repetition of 4 so the result of this will be 0. As a 
result every 4 cycle (400 mSec) the condition be true and calling the function. Also, after 8 cycles (800 mSec)
the condition is true for two factions, but the processor will implement on the priority that it was put in 
the program.
http://mbed.org/users/muaiyd/code/ass2/
*/
#include "Function.h"

uint16_t Counter=0;
void CycleFunction(); 
 
int main(){
    Init_LCD();
    InitFile();
    LogTimer.start();
    //Call the CycleFunction every 100 msec can see that on pin30
    Cycle.attach(&CycleFunction,0.1);      
}

void CycleFunction(){
    TickerPin = !(TickerPin);
    //Can see the period of execute every function below on the pin that
    //writen infront of it
    //The least common multiple for all the above is 1800 cycles
    // so every 180 Sec all the functions are repeated
    Counter++;
    if(Counter == 1800) Counter = 0;
    
    if( Counter % 4 == 0) ReadDigitalin();  //Pin 21
    if( Counter % 8 ==0) ReadAnalogin();   //Pin 22
    if( Counter % 10 == 0) FreqMsur();     //Pin 23
    if( Counter % 15 == 0) BinaryCounter();//Pin 24
    if( Counter % 18 == 0) InputCheck();   //Pin 25
    if( Counter % 20 == 0 ) Display();      //Pin 26
    if( Counter % 50 == 0 ) LogFile();      //Pin 27
  
}